linux-2.6-microblaze.git
7 years agoMerge tag 'perf-core-for-mingo-4.13-20170630' of git://git.kernel.org/pub/scm/linux...
Ingo Molnar [Sat, 1 Jul 2017 08:39:25 +0000 (10:39 +0200)]
Merge tag 'perf-core-for-mingo-4.13-20170630' of git://git./linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

Intel PT enhancements:

 - Support "ptwrite" instruction, a way to stuff 32 or 64 bit values into
   the Intel PT trace (Adrian Hunter)

 - Support power events in Intel PT to report changes to C-state (Adrian
   Hunter)

 - Synthesize Intel PT events as PERF_RECORD_SAMPLE records with a
   perf_event_attr.type (PERF_TYPE_SYNTH) just after the range used by the
   kernel, i.e. right after what is allocated for PMUs, at INT_MAX + 1U,
   attr.config will have the identification for the synthesized event and
   the PERF_SAMPLE_RAW payload will have its fields (Adrian Hunter)

Infrastructure changes:

 - Remove warning() and error(), using instead pr_warning() and
   pr_error(), consolidating error reporting (Arnaldo Carvalho de Melo)

 - Add platform dependency to 'perf test 15' (Thomas Richter)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
7 years agoperf auxtrace: Add CPU filter support
Adrian Hunter [Fri, 26 May 2017 08:17:38 +0000 (11:17 +0300)]
perf auxtrace: Add CPU filter support

Decoding auxtrace data can take a long time. To avoid decoding
unnecessarily, filter auxtrace data that is collected per-cpu before it is
decoded.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-38-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf intel-pt: Do not use TSC packets for calculating CPU cycles to TSC
Adrian Hunter [Fri, 26 May 2017 08:17:37 +0000 (11:17 +0300)]
perf intel-pt: Do not use TSC packets for calculating CPU cycles to TSC

CBR (core-to-bus ratio) packets provide an indication of CPU frequency. A
more accurate measure can be made by counting the cycles (given by CYC
packets) in between other timing packets (either MTC or TSC). Using TSC
packets has at least 2 issues: 1) timing might have stopped (e.g. mwait) or
2) TSC packets within PSB+ might slip past CYC packets. For now, simply do
not use TSC packets for calculating CPU cycles to TSC. That leaves the case
where 2 MTC packets are used, otherwise falling back to the CBR value.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-37-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf intel-pt: Update documentation to include new ptwrite and power events
Adrian Hunter [Fri, 26 May 2017 08:17:36 +0000 (11:17 +0300)]
perf intel-pt: Update documentation to include new ptwrite and power events

Update documentation to include new ptwrite and power events.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-36-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf intel-pt: Add example script for power events and PTWRITE
Adrian Hunter [Fri, 26 May 2017 08:17:35 +0000 (11:17 +0300)]
perf intel-pt: Add example script for power events and PTWRITE

Add script intel-pt-events.py that provides an example of how to unpack the
raw data for power events and PTWRITE.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-35-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf intel-pt: Synthesize new power and "ptwrite" events
Adrian Hunter [Fri, 30 Jun 2017 08:36:45 +0000 (11:36 +0300)]
perf intel-pt: Synthesize new power and "ptwrite" events

Synthesize new power and ptwrite events.

Power events report changes to C-state but I have also added support
for the existing CBR (core-to-bus ratio) packet and included that
when outputting power events.

The PTWRITE packet is associated with the new "ptwrite" instruction,
which is essentially just a way to stuff a 32 or 64 bit value into the
PT trace.

More details can be found in the patches that add documentation and in
the Intel SDM.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1498811805-2335-1-git-send-email-adrian.hunter@intel.com
[ Copy the description of such packet from the patchkit cover message ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf intel-pt: Move code in intel_pt_synth_events() to simplify attr setting
Adrian Hunter [Fri, 26 May 2017 08:17:33 +0000 (11:17 +0300)]
perf intel-pt: Move code in intel_pt_synth_events() to simplify attr setting

intel_pt_synth_events() uses the same attr structure to create each event.
Move the code around a bit to simplify that.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-33-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf intel-pt: Factor out intel_pt_set_event_name()
Adrian Hunter [Fri, 26 May 2017 08:17:32 +0000 (11:17 +0300)]
perf intel-pt: Factor out intel_pt_set_event_name()

Factor out intel_pt_set_event_name() so it can be reused.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-32-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf intel-pt: Tidy messages into called function intel_pt_synth_event()
Adrian Hunter [Fri, 26 May 2017 08:17:31 +0000 (11:17 +0300)]
perf intel-pt: Tidy messages into called function intel_pt_synth_event()

Tidy print messages into called function intel_pt_synth_event().

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-31-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf intel-pt: Tidy Intel PT evsel lookup into separate function
Adrian Hunter [Fri, 26 May 2017 08:17:30 +0000 (11:17 +0300)]
perf intel-pt: Tidy Intel PT evsel lookup into separate function

Tidy the lookup of the Intel PT selected event (perf_evsel) into a separate
function.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-30-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf intel-pt: Join needlessly wrapped lines
Adrian Hunter [Fri, 26 May 2017 08:17:29 +0000 (11:17 +0300)]
perf intel-pt: Join needlessly wrapped lines

Join needlessly wrapped lines.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-29-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf intel-pt: Remove unused instructions_sample_period
Adrian Hunter [Fri, 26 May 2017 08:17:28 +0000 (11:17 +0300)]
perf intel-pt: Remove unused instructions_sample_period

Remove unused struct intel_pt member instructions_sample_period.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-28-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf intel-pt: Factor out common code synthesizing event samples
Adrian Hunter [Fri, 26 May 2017 08:17:27 +0000 (11:17 +0300)]
perf intel-pt: Factor out common code synthesizing event samples

Factor out common code in functions synthesizing event samples i.e.
intel_pt_synth_branch_sample(), intel_pt_synth_instruction_sample() and
intel_pt_synth_transaction_sample().

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-27-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf script: Add synthesized Intel PT power and ptwrite events
Adrian Hunter [Fri, 30 Jun 2017 08:36:42 +0000 (11:36 +0300)]
perf script: Add synthesized Intel PT power and ptwrite events

Add definitions for synthesized Intel PT events for power and ptwrite.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1498811802-2301-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf/x86/intel: Constify the 'lbr_desc[]' array and make a function static
Colin Ian King [Thu, 29 Jun 2017 09:14:06 +0000 (10:14 +0100)]
perf/x86/intel: Constify the 'lbr_desc[]' array and make a function static

A few minor clean-ups: constify the lbr_desc[] array and make
local function lbr_from_signext_quirk_rd() static to fix a sparse warning:

  "symbol 'lbr_from_signext_quirk_rd' was not declared. Should it be static?"

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-janitors@vger.kernel.org
Link: http://lkml.kernel.org/r/20170629091406.9870-1-colin.king@canonical.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
7 years agoperf script: Add 'synth' field for synthesized event payloads
Adrian Hunter [Fri, 26 May 2017 08:17:22 +0000 (11:17 +0300)]
perf script: Add 'synth' field for synthesized event payloads

Add a field to display the content the raw_data of a synthesized event.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-22-git-send-email-adrian.hunter@intel.com
[ Resolved conflict with 106dacd86f04 ("perf script: Support -F brstackoff,dso") ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf auxtrace: Add itrace option to output power events
Adrian Hunter [Fri, 26 May 2017 08:17:25 +0000 (11:17 +0300)]
perf auxtrace: Add itrace option to output power events

Add itrace option to output power events.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-25-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf auxtrace: Add itrace option to output ptwrite events
Adrian Hunter [Fri, 26 May 2017 08:17:24 +0000 (11:17 +0300)]
perf auxtrace: Add itrace option to output ptwrite events

Add itrace option to output ptwrite events.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-24-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agotools include: Add byte-swapping macros to kernel.h
Adrian Hunter [Fri, 26 May 2017 08:17:23 +0000 (11:17 +0300)]
tools include: Add byte-swapping macros to kernel.h

Add byte-swapping macros to kernel.h

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-23-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf script: Add 'synth' event type for synthesized events
Adrian Hunter [Wed, 21 Jun 2017 10:17:19 +0000 (13:17 +0300)]
perf script: Add 'synth' event type for synthesized events

Instruction trace decoders such as Intel PT may have additional information
recorded in the trace. For example, Intel PT has power information and a
there is a new instruction 'ptwrite' that can write a value into a PTWRITE
trace packet.

Such information may be associated with an IP and so can be treated as a
sample (PERF_RECORD_SAMPLE). Custom data can be incorporated in the
sample as raw_data (PERF_SAMPLE_RAW).

However a means of identifying the raw data format is needed. That will
be done by synthesizing an attribute for it.

So add an attribute type for custom synthesized events.  Different
synthesized events will be identified by the attribute 'config'.

Committer notes:

Start those PERF_TYPE_ after the PMU range, i.e. after (INT_MAX + 1U),
i.e. after perf_pmu_register() -> idr_alloc(end=0).

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1498040239-32418-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agox86/insn: perf tools: Add new ptwrite instruction
Adrian Hunter [Fri, 19 May 2017 07:50:30 +0000 (10:50 +0300)]
x86/insn: perf tools: Add new ptwrite instruction

Add ptwrite to the op code map and the perf tools new instructions test.
To run the test:

  $ tools/perf/perf test "x86 ins"
  39: Test x86 instruction decoder - new instructions          : Ok

Or to see the details:

  $ tools/perf/perf test -v "x86 ins" 2>&1 | grep ptwrite

For information about ptwrite, refer the Intel SDM.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: http://lkml.kernel.org/r/1495180230-19367-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf jit: fix typo: "incalid" -> "invalid"
Colin Ian King [Tue, 27 Jun 2017 12:49:17 +0000 (13:49 +0100)]
perf jit: fix typo: "incalid" -> "invalid"

Trivial fix to typo in jvmti_close() warnx warning message.

Signed-off-by: Colin King <colin.king@canonical.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20170627124917.19151-1-colin.king@canonical.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf tools: Kill die()
Arnaldo Carvalho de Melo [Tue, 27 Jun 2017 14:49:13 +0000 (11:49 -0300)]
perf tools: Kill die()

Finally can nuke this function, no more users.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-eivvvzn8ie6w42gy3batxoy7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf config: Do not die when parsing u64 or int config values
Arnaldo Carvalho de Melo [Tue, 27 Jun 2017 14:44:58 +0000 (11:44 -0300)]
perf config: Do not die when parsing u64 or int config values

Just warn the user and ignore those values.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-tbf60nj3ierm6hrkhpothymx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf tools: Replace error() with pr_err()
Arnaldo Carvalho de Melo [Tue, 27 Jun 2017 14:22:31 +0000 (11:22 -0300)]
perf tools: Replace error() with pr_err()

To consolidate the error reporting facility.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-b41iot1094katoffdf19w9zk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf tools: Remove warning()
Arnaldo Carvalho de Melo [Tue, 27 Jun 2017 14:13:20 +0000 (11:13 -0300)]
perf tools: Remove warning()

Now everything uses pr_warning(), so ditch it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-hv8r0mgdhk73wtfq3zrhavgx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf event-parse: Use pr_warning()
Arnaldo Carvalho de Melo [Tue, 27 Jun 2017 14:08:14 +0000 (11:08 -0300)]
perf event-parse: Use pr_warning()

Convert sole user of warning() in this file to pr_warning(),
consolidating error reporting facilities.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-3y7yf6v673ujl2rcs34tzv8n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf config: Use pr_warning()
Arnaldo Carvalho de Melo [Tue, 27 Jun 2017 14:03:17 +0000 (11:03 -0300)]
perf config: Use pr_warning()

warning() is going away, consolidating error reporting.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-5r3636cwl4z1varo90mervai@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf help: Use pr_warning()
Arnaldo Carvalho de Melo [Tue, 27 Jun 2017 14:01:17 +0000 (11:01 -0300)]
perf help: Use pr_warning()

Complete the switch to using te pr_{warning,error,etc} error reporting
facilities.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-3l9gr6237b4aqyo0rsspixe2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf help: Elliminate dup code for reporting
Arnaldo Carvalho de Melo [Tue, 27 Jun 2017 13:59:28 +0000 (10:59 -0300)]
perf help: Elliminate dup code for reporting

And switch from warning() to pr_warning(), to elliminate another
duplication: too many error reporting facilities.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-pkzcjrhek3uuqc4i5i9ealwd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf help: Introduce exec_failed() to avoid code duplication
Arnaldo Carvalho de Melo [Tue, 27 Jun 2017 13:52:57 +0000 (10:52 -0300)]
perf help: Introduce exec_failed() to avoid code duplication

The warning(str_error_r(errno)) pattern can be replaced with a function,
do it.

And while at it use pr_warning(), we have way too many error reporting
facilities, time to drop some, starting with the one we got from the git
sources.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-lbak5npj1ri1uuvf1en3c0p0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf tests: Add platform dependency to test 15
Thomas Richter [Thu, 22 Jun 2017 07:36:25 +0000 (09:36 +0200)]
perf tests: Add platform dependency to test 15

This patch adds platform dependency into the test case 15
(perf_event_attr). It is based on a suggestion from Jiri Olsa.

Add a new optional attribute named 'arch' in the [config] section of the
test case file. It is a comma separated list of architecture names this
test can be executed on. For example:

  arch = x86_64,alpha,ppc

If this attribute is missing the test is executed on any platform.  This
does not break existing behavior.

The values listed for this attribute should be identical to uname -m
output.

If the list starts with an exclamation mark (!) the comparison is
inverted, for example for

  arch = !s390x,ppc

the test is not executed on s390x or ppc platforms.  The exclamation
mark must be at the beginnning of the list.

Here is an example debug output:

  [root@s35lp76]# fgrep arch tests/attr/test-stat-C2
  arch = x86_64,alpha,ppc
  [root@s35lp76]# PERF_TEST_ATTR=/tmp /usr/bin/python2 ./tests/attr.py \
    -d ./tests/attr/ -p ./perf -vvvvv -t test-stat-C1

provides the following output:

  running './tests/attr//test-stat-C1'
  test limitation 'x86_64,alpha,ppc' <--- new
    loading expected events
      Event event:base-stat
        fd = 1
        group_fd = -1
        .....

Here is the output when a test is skipped:

  [root@s35lp76]# fgrep arch tests/attr/test-stat-C1
  arch = !s390x
  [root@s35lp76]# PERF_TEST_ATTR=/tmp /usr/bin/python2 ./tests/attr.py \
    -d ./tests/attr/ -p ./perf -vvvvv -t test-stat-C1

provides the following output:

test limitation '!s390x' <--- new

skipped [s390x] './tests/attr//test-stat-C1' <--- new

The test is skipped with return code 0.

Suggested-and-Acked-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: linux-s390@vger.kernel.org
Link: http://lkml.kernel.org/r/20170622073625.86762-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoMerge tag 'perf-core-for-mingo-4.13-20170621' of git://git.kernel.org/pub/scm/linux...
Ingo Molnar [Wed, 21 Jun 2017 18:11:53 +0000 (20:11 +0200)]
Merge tag 'perf-core-for-mingo-4.13-20170621' of git://git./linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

New features:

 - Add support to measure SMI cost in 'perf stat' (Kan Liang)

 - Add support for unwinding callchains in powerpc with libdw (Paolo Bonzini)

Fixes:

 - Fix message: cpu list option is -C not -c (Adrian Hunter)

 - Fix 'perf script' message: field list option is -F not -f (Adrian Hunter)

 - Intel PT fixes: (Adrian Hunter)

   o Fix missing stack clear
   o Ensure IP is zero when state is INTEL_PT_STATE_NO_IP
   o Fix last_ip usage
   o Ensure never to set 'last_ip' when packet 'count' is zero
   o Clear FUP flag on error
   o Fix transactions_sample_type

Infrastructure changes:

 - Intel PT cleanups/refactorings (Adrian Hunter)

   o Use FUP always when scanning for an IP
   o Add missing __fallthrough
   o Remove redundant initial_skip checks
   o Allow decoding with branch tracing disabled
   o Add default config for pass-through branch enable
   o Add documentation for new config terms
   o Add decoder support for ptwrite and power event packets
   o Add reserved byte to CBR packet payload
   o Add decoder support for CBR events

 - Move  find_process() to the only place that uses it, skimming some
   more fat from util.[ch] (Arnaldo Carvalho de Melo)

 - Do parameter validation earlier on fetch_kernel_version() (Arnaldo Carvalho de Melo)

 - Remove unused _ALL_SOURCE define (Arnaldo Carvalho de Melo)

 - Add sysfs__write_int function (Kan Liang)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
7 years agoperf script: Fix message because field list option is -F not -f
Adrian Hunter [Fri, 26 May 2017 08:17:20 +0000 (11:17 +0300)]
perf script: Fix message because field list option is -F not -f

Fix message because field list option is -F not -f.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-20-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf tools: Fix message because cpu list option is -C not -c
Adrian Hunter [Fri, 26 May 2017 08:17:19 +0000 (11:17 +0300)]
perf tools: Fix message because cpu list option is -C not -c

Fix message because cpu list option is -C not -c

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-19-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf intel-pt: Fix transactions_sample_type
Adrian Hunter [Fri, 26 May 2017 08:17:18 +0000 (11:17 +0300)]
perf intel-pt: Fix transactions_sample_type

'transactions_sample_type' is needed to correctly inject transactions
samples but it was not being set. Set it from the event sample type.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-18-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf intel-pt: Remove redundant initial_skip checks
Adrian Hunter [Fri, 26 May 2017 08:17:17 +0000 (11:17 +0300)]
perf intel-pt: Remove redundant initial_skip checks

'initial_skip' is checked inside the sample synthesis functions which means
it is actually being done twice for 'instructions' and 'transactions'
samples. Remove the redundant checks.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-17-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf intel-pt: Add decoder support for CBR events
Adrian Hunter [Fri, 26 May 2017 08:17:16 +0000 (11:17 +0300)]
perf intel-pt: Add decoder support for CBR events

Add decoder support for informing the tools of changes to the core-to-bus
ratio (CBR).

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-16-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf intel-pt: Add reserved byte to CBR packet payload
Adrian Hunter [Fri, 26 May 2017 08:17:15 +0000 (11:17 +0300)]
perf intel-pt: Add reserved byte to CBR packet payload

Future proof CBR packet decoding by passing through also the undefined
'reserved' byte in the packet payload.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-15-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf intel-pt: Add decoder support for ptwrite and power event packets
Adrian Hunter [Fri, 26 May 2017 08:17:14 +0000 (11:17 +0300)]
perf intel-pt: Add decoder support for ptwrite and power event packets

Add decoder support for PTWRITE, MWAIT, PWRE, PWRX and EXSTOP packets. This
patch only affects the decoder, so the tools still do not select or consume
the new information. That is added in subsequent patches.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-14-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf intel-pt: Add documentation for new config terms
Adrian Hunter [Fri, 26 May 2017 08:17:13 +0000 (11:17 +0300)]
perf intel-pt: Add documentation for new config terms

Add documentation for new config terms.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-13-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf intel-pt: Add default config for pass-through branch enable
Adrian Hunter [Fri, 26 May 2017 08:17:12 +0000 (11:17 +0300)]
perf intel-pt: Add default config for pass-through branch enable

Branch tracing is enabled by default, so a fake config bit called 'pt'
(pass-through) was added to allow the 'branch enable' bit to have affect.
Add default config 'pt,branch' which will allow users to disable branch
tracing using 'branch=0' instead of having to specify 'pt,branch=0'.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-12-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf intel-pt: Allow decoding with branch tracing disabled
Adrian Hunter [Fri, 26 May 2017 08:17:11 +0000 (11:17 +0300)]
perf intel-pt: Allow decoding with branch tracing disabled

The kernel now supports the disabling of branch tracing, however the
decoder assumes branch tracing is always enabled. Pass through a parameter
to indicate whether branch tracing is enabled and use it to avoid cases
when the decoder is expecting branch packets. There are 2 such cases.
First, FUP packets which can bind to an IP even when there is no branch
tracing. Secondly, the decoder will try to use branch packets to find an IP
to start decoding or to recover from errors.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-11-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf intel-pt: Add missing __fallthrough
Adrian Hunter [Fri, 26 May 2017 08:17:10 +0000 (11:17 +0300)]
perf intel-pt: Add missing __fallthrough

perf tools uses __fallthrough. Add missing  __fallthrough to a switch
statement.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-10-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf intel-pt: Clear FUP flag on error
Adrian Hunter [Fri, 26 May 2017 08:17:09 +0000 (11:17 +0300)]
perf intel-pt: Clear FUP flag on error

Sometimes a FUP packet is associated with a TSX transaction and a flag is
set to indicate that. Ensure that flag is cleared on any error condition
because at that point the decoder can no longer assume it is correct.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1495786658-18063-9-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf intel-pt: Use FUP always when scanning for an IP
Adrian Hunter [Fri, 26 May 2017 08:17:08 +0000 (11:17 +0300)]
perf intel-pt: Use FUP always when scanning for an IP

The decoder will try to use branch packets to find an IP to start decoding
or to recover from errors. Currently the FUP packet is used only in the
case of an overflow, however there is no reason for that to be a special
case. So just use FUP always when scanning for an IP.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1495786658-18063-8-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf intel-pt: Ensure never to set 'last_ip' when packet 'count' is zero
Adrian Hunter [Fri, 26 May 2017 08:17:07 +0000 (11:17 +0300)]
perf intel-pt: Ensure never to set 'last_ip' when packet 'count' is zero

Intel PT uses IP compression based on the last IP. For decoding purposes,
'last IP' is not updated when a branch target has been suppressed, which is
indicated by IPBytes == 0. IPBytes is stored in the packet 'count', so
ensure never to set 'last_ip' when packet 'count' is zero.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1495786658-18063-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf intel-pt: Fix last_ip usage
Adrian Hunter [Fri, 26 May 2017 08:17:06 +0000 (11:17 +0300)]
perf intel-pt: Fix last_ip usage

Intel PT uses IP compression based on the last IP. For decoding
purposes, 'last IP' is considered to be reset to zero whenever there is
a synchronization packet (PSB). The decoder wasn't doing that, and was
treating the zero value to mean that there was no last IP, whereas
compression can be done against the zero value. Fix by setting last_ip
to zero when a PSB is received and keep track of have_last_ip.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1495786658-18063-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf intel-pt: Ensure IP is zero when state is INTEL_PT_STATE_NO_IP
Adrian Hunter [Fri, 26 May 2017 08:17:05 +0000 (11:17 +0300)]
perf intel-pt: Ensure IP is zero when state is INTEL_PT_STATE_NO_IP

A value of zero is used to indicate that there is no IP. Ensure the
value is zero when the state is INTEL_PT_STATE_NO_IP.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1495786658-18063-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf intel-pt: Fix missing stack clear
Adrian Hunter [Fri, 26 May 2017 08:17:04 +0000 (11:17 +0300)]
perf intel-pt: Fix missing stack clear

The return compression stack must be cleared whenever there is a PSB. Fix
one case where that was not happening.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1495786658-18063-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf intel-pt: Improve sample timestamp
Adrian Hunter [Fri, 26 May 2017 08:17:03 +0000 (11:17 +0300)]
perf intel-pt: Improve sample timestamp

The decoder uses its current timestamp in samples. Usually that is a
timestamp that has already passed, but in some cases it is a timestamp
for a branch that the decoder is walking towards, and consequently
hasn't reached. Improve that situation by using the pkt_state to
determine when to use the current or previous timestamp.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1495786658-18063-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf intel-pt: Move decoder error setting into one condition
Adrian Hunter [Fri, 26 May 2017 08:17:02 +0000 (11:17 +0300)]
perf intel-pt: Move decoder error setting into one condition

Move decoder error setting into one condition.

Cc'ed to stable because later fixes depend on it.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1495786658-18063-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf unwind: Support for powerpc
Paolo Bonzini [Thu, 1 Jun 2017 10:24:41 +0000 (12:24 +0200)]
perf unwind: Support for powerpc

Porting PPC to libdw only needs an architecture-specific hook to move
the register state from perf to libdw.

The ARM and x86 architectures already use libdw, and it is useful to
have as much common code for the unwinder as possible.  Mark Wielaard
has contributed a frame-based unwinder to libdw, so that unwinding works
even for binaries that do not have CFI information.  In addition,
libunwind is always preferred to libdw by the build machinery so this
cannot introduce regressions on machines that have both libunwind and
libdw installed.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Milian Wolff <milian.wolff@kdab.com>
Acked-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1496312681-20133-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf stat: Add support to measure SMI cost
Kan Liang [Fri, 26 May 2017 19:05:38 +0000 (12:05 -0700)]
perf stat: Add support to measure SMI cost

Implementing a new --smi-cost mode in perf stat to measure SMI cost.

During the measurement, the /sys/device/cpu/freeze_on_smi will be set.

The measurement can be done with one counter (unhalted core cycles), and
two free running MSR counters (IA32_APERF and SMI_COUNT).

In practice, the percentages of SMI core cycles should be more useful
than absolute value. So the output will be the percentage of SMI core
cycles and SMI#. metric_only will be set by default.

SMI cycles% = (aperf - unhalted core cycles) / aperf

Here is an example output.

 Performance counter stats for 'sudo echo ':

SMI cycles%          SMI#
    0.1%              1

       0.010858678 seconds time elapsed

Users who wants to get the actual value can apply additional
--no-metric-only.

Signed-off-by: Kan Liang <Kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1495825538-5230-3-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agotools lib api fs: Add sysfs__write_int function
Kan Liang [Fri, 26 May 2017 19:05:37 +0000 (12:05 -0700)]
tools lib api fs: Add sysfs__write_int function

Add sysfs__write_int() to ease up writing int to sysfs.  New interface
is:

  int sysfs__write_int(const char *entry, int value);

Also, introducing filename__write_int() which is useful for new helpers
to write sysctl values.

Signed-off-by: Kan Liang <Kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1495825538-5230-2-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf tools: Remove unused _ALL_SOURCE define
Arnaldo Carvalho de Melo [Tue, 20 Jun 2017 15:30:07 +0000 (12:30 -0300)]
perf tools: Remove unused _ALL_SOURCE define

Curious as to what this was for I looked at /usr/include/ and only some
python headers define this, and it ends up being to enable "extensions"
on some old OSes:

  /* Enable extensions on AIX 3, Interix */

I guess we can remove this one safely.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-omnundlxo2brs552bdl6m0j1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf tools: Do parameter validation earlier on fetch_kernel_version()
Arnaldo Carvalho de Melo [Tue, 20 Jun 2017 15:19:16 +0000 (12:19 -0300)]
perf tools: Do parameter validation earlier on fetch_kernel_version()

While trying to reduce util.[ch] I noticed that fetch_kernel_version()
and fetch_ubuntu_kernel_version() do lots of operations only to check if
they are needed, i.e. it checks if the pointer where to return the
kernel version is NULL only after obtaining the kernel version from
/proc/version_signature or by parsing the results from uname().

Do it earlier not to confuse people reading this code in the future :-)

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-i94qwyekk4tzbu0b9ce1r1mz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf evsel: Adopt find_process()
Arnaldo Carvalho de Melo [Tue, 20 Jun 2017 15:05:38 +0000 (12:05 -0300)]
perf evsel: Adopt find_process()

And make it static, nobody else uses it, if we ever need it in more
places we can carve a new source file for process related methods,
for now lets reduce util.{c,h} a tad more.

Link: http://lkml.kernel.org/n/tip-zgb28rllvypjibw52aaz9p15@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoMerge tag 'perf-core-for-mingo-4.13-20170719' of git://git.kernel.org/pub/scm/linux...
Ingo Molnar [Tue, 20 Jun 2017 08:49:08 +0000 (10:49 +0200)]
Merge tag 'perf-core-for-mingo-4.13-20170719' of git://git./linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

User visible changes:

- Allow adding and removing fields to the default 'perf script' columns,
  using + or - as field prefixes to do so (Andi Kleen)

- Display titles in left frame in the annotate browser (Jin Yao)

- Allow resolving the DSO name with 'perf script -F brstack{sym,off},dso'
  (Mark Santaniello)

- Support function filtering in 'perf ftrace' (Namhyung Kim)

- Allow specifying function call depth in 'perf ftrace' (Namhyumg Kim)

Infrastructure changes:

- Adopt __noreturn, __printf, __scanf, noinline, __packed and __aligned
  __alignment__(()) markers, to make the tools/ source code base to be
  more compact and look more like kernel code (Arnaldo Carvalho de Melo)

- Remove unnecessary check in annotate_browser_write() (Jin Yao)

- Return arch from symbol__disassemble() so that callers, such as
  the annotate TUI browser to use arch specific formattings, such
  as the upcoming instruction micro-op fusion on Intel Core (Jin Yao)

- Remove superfluous check before use in the coresight code base (Kim
  Phillips)

- Remove unused SAMPLE_SIZE defines and BTS priv array (Kim Phillips)

- Error handling fix/tidy ups in 'perf config' (Taeung Song)

- Avoid error in the BPF proggie built with clang in 'perf test llvm'
  when PROFILE_ALL_BRANCHES is set (Wang Nan)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
7 years agoMerge tag 'v4.12-rc6' into perf/core, to pick up fixes
Ingo Molnar [Tue, 20 Jun 2017 08:48:44 +0000 (10:48 +0200)]
Merge tag 'v4.12-rc6' into perf/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>
7 years agoperf config: Refactor the code using 'ret' variable in cmd_config()
Taeung Song [Sat, 17 Jun 2017 03:46:42 +0000 (12:46 +0900)]
perf config: Refactor the code using 'ret' variable in cmd_config()

To simplify the code related to 'ret' variable in cmd_config(),
initialize 'ret' with -1 instead of 0 and use goto to perform resource
release at the end of the function, setting ret to zero just before the
out_err label, as usual in the kernel sources.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1497671202-20495-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf config: Check error cases of {show_spec, set}_config()
Taeung Song [Sat, 17 Jun 2017 03:46:37 +0000 (12:46 +0900)]
perf config: Check error cases of {show_spec, set}_config()

show_spec_config() and set_config() can be called multiple times
in the loop in cmd_config().

However, The error cases of them wasn't checked, so fix it.

Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1497671197-20450-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf ftrace: Add -D option for depth filter
Namhyung Kim [Sun, 18 Jun 2017 14:23:02 +0000 (23:23 +0900)]
perf ftrace: Add -D option for depth filter

The -D/--graph-depth option is to set max graph depth.  The following
example traces max 2-depth of page fault handler.

  $ sudo perf ftrace -G __do_page_fault -D 2 -- hello
   ...
   0)               |  __do_page_fault() {
   0)   0.063 us    |    down_read_trylock();
   0)   0.251 us    |    find_vma();
   0)   5.374 us    |    handle_mm_fault();
   0)   0.054 us    |    up_read();
   0)   7.463 us    |  }
   ...

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170618142302.25390-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf ftrace: Add option for function filtering
Namhyung Kim [Sun, 18 Jun 2017 14:23:01 +0000 (23:23 +0900)]
perf ftrace: Add option for function filtering

The -T/--trace-funcs and -N/--notrace-funcs options are to specify
functions to enable/disable tracing dynamically.

The -G/--graph-funcs and -g/--nograph-funcs options are to set filters
for function graph tracer.

For example, to trace fault handling functions only:

  $ sudo perf ftrace -T *fault hello
   0)               |  __do_page_fault() {
   0)               |    handle_mm_fault() {
   0)   2.117 us    |      __handle_mm_fault();
   0)   3.627 us    |    }
   0)   7.811 us    |  }
   0)               |  __do_page_fault() {
   0)               |    handle_mm_fault() {
   0)   2.014 us    |      __handle_mm_fault();
   0)   2.424 us    |    }
   0)   2.951 us    |  }
   ...

To trace all functions executed in __do_page_fault:

  $ sudo perf ftrace -G __do_page_fault hello
   2)               |  __do_page_fault() {
   3)   0.060 us    |    down_read_trylock();
   3)               |    find_vma() {
   3)   0.075 us    |      vmacache_find();
   3)   0.053 us    |      vmacache_update();
   3)   1.246 us    |    }
   3)               |    handle_mm_fault() {
   3)   0.063 us    |      __rcu_read_lock();
   3)   0.056 us    |      mem_cgroup_from_task();
   3)   0.057 us    |      __rcu_read_unlock();
   3)               |      __handle_mm_fault() {
   3)               |        filemap_map_pages() {
   3)   0.058 us    |          __rcu_read_lock();
   3)               |          alloc_set_pte() {
   ...

But don't want to show details in handle_mm_fault:

  $ sudo perf ftrace -G __do_page_fault -g handle_mm_fault hello
   3)               |  __do_page_fault() {
   3)   0.049 us    |    down_read_trylock();
   3)               |    find_vma() {
   3)   0.048 us    |      vmacache_find();
   3)   0.041 us    |      vmacache_update();
   3)   0.680 us    |    }
   3)   0.036 us    |    up_read();
   3)   4.547 us    |  } /* __do_page_fault */
   ...

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170618142302.25390-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf ftrace: Move setup_pager before opening trace_pipe
Namhyung Kim [Sun, 18 Jun 2017 14:23:00 +0000 (23:23 +0900)]
perf ftrace: Move setup_pager before opening trace_pipe

The 'perf ftrace' command fails to reset tracer after finishing
recording like below:

  $ sudo perf ftrace -v hello
  write 'nop' to tracing/current_tracer failed: Device or resource busy
  ...

This is because the trace_pipe file is open in pager process.  Move the
pager setup to before opening the file.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: kernel-team@lge.com
Fixes: 583359646fde ("perf ftrace: Use pager for displaying result")
Link: http://lkml.kernel.org/r/20170618142302.25390-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf ftrace: Show error message when fails to set ftrace files
Namhyung Kim [Sun, 18 Jun 2017 14:22:59 +0000 (23:22 +0900)]
perf ftrace: Show error message when fails to set ftrace files

It'd be better for debugging to show an error message when it fails to
setup ftrace for some reason.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170618142302.25390-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf script: Support -F brstackoff,dso
Mark Santaniello [Mon, 19 Jun 2017 16:38:25 +0000 (09:38 -0700)]
perf script: Support -F brstackoff,dso

The idea here is to make AutoFDO easier in cloud environment with ASLR.
It's easiest to show how this is useful by example. I built a small test
akin to "while(1) { do_nothing(); }" where the do_nothing function is
loaded from a dso:

  $ cat burncpu.cpp
  #include <dlfcn.h>

  int main() {
    void* handle = dlopen("./dso.so", RTLD_LAZY);
    if (!handle) return -1;

    typedef void (*fp)();
    fp do_nothing = (fp) dlsym(handle, "do_nothing");

    while(1) {
      do_nothing();
    }
  }

  $ cat dso.cpp
  extern "C" void do_nothing() {}

  $ cat build.sh
  #!/bin/bash
  g++ -shared dso.cpp -o dso.so
  g++ burncpu.cpp -o burncpu -ldl

I sampled the execution of this program with perf record -b.

Using the existing "brstack,dso", we get absolute addresses that are
affected by ASLR, and could be different on different hosts. The address
does not uniquely identify a branch/target in the binary:

  $ perf script -F brstack,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
  0x7f967139b6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0

Using the existing "brstacksym,dso" is a little better, because the
symbol plus offset and dso name *does* uniquely identify a branch/target
in the binary.  Ultimately, however, AutoFDO wants a simple offset into
the binary, so we'd have to undo all the work perf did to symbolize in
the first place:

  $ perf script -F brstacksym,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
  do_nothing+0x5(/tmp/burncpu/dso.so)/main+0x44(/tmp/burncpu/exe)/P/-/-/0

With the new "brstackoff,dso" we get what we need: a simple offset into a
specific dso/binary that uniquely identifies a branch/target:
  $ perf script -F brstackoff,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
  0x6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0

Signed-off-by: Mark Santaniello <marksan@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170619163825.2012979-2-marksan@fb.com
[ Updated documentation about 'brstackoff' using text from above ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf script: Support -F brstack,dso and brstacksym,dso
Mark Santaniello [Mon, 19 Jun 2017 16:38:24 +0000 (09:38 -0700)]
perf script: Support -F brstack,dso and brstacksym,dso

Perf script can report the dso for "addr" and "ip" fields.

This adds the same support for the "brstack" and "brstacksym" fields.
This can be helpful for AutoFDO: we can ignore LBR entries unless the
source and target address are both in the target module we are about to
build.

I built a small test akin to "while(1) { do_nothing(); }" where the
do_nothing function is loaded from a dso:

  $ cat burncpu.cpp
  #include <dlfcn.h>

  int main() {
    void* handle = dlopen("./dso.so", RTLD_LAZY);
    if (!handle) return -1;

    typedef void (*fp)();
    fp do_nothing = (fp) dlsym(handle, "do_nothing");

    while(1) {
      do_nothing();
    }
  }

  $ cat dso.cpp
  extern "C" void do_nothing() {}

  $ cat build.sh
  #!/bin/bash
  g++ -shared dso.cpp -o dso.so
  g++ burncpu.cpp -o burncpu -ldl

I sampled the execution with perf record -b.  Using the new perf script
functionality I can easily find cases where there was a transition from one
dso to another:

  $ perf record -a -b -- sleep 5
  [ perf record: Woken up 55 times to write data ]
  [ perf record: Captured and wrote 18.815 MB perf.data (43593 samples) ]

  $ perf script -F brstack,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
  0x7f967139b6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0

  $ perf script -F brstacksym,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
  do_nothing+0x5(/tmp/burncpu/dso.so)/main+0x44(/tmp/burncpu/exe)/P/-/-/0

Signed-off-by: Mark Santaniello <marksan@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170619163825.2012979-1-marksan@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf test llvm: Avoid error when PROFILE_ALL_BRANCHES is set
Wang Nan [Tue, 20 Jun 2017 18:32:03 +0000 (02:32 +0800)]
perf test llvm: Avoid error when PROFILE_ALL_BRANCHES is set

The 'if' keyword is a define that expands to complex code when
CONFIG_PROFILE_ALL_BRANCHES is selected, which causes a 'perf test LLVM'
failure like:

  $ ./perf test LLVM
  35: LLVM search and compile                    :
  35.1: Basic BPF llvm compile                    : Ok
  35.2: kbuild searching                          : Ok
  35.3: Compile source for BPF prologue generation: FAILED!
  35.4: Compile source for BPF relocation         : Skip

The only affected test case is bpf-script-test-prologue.c
because it uses kernel headers and has 'if' inside.

This patch undefines 'if' to make it passes perf test.

More detailed analysis from a message in this thread, also by Wang:

The problem is caused by following relocation information:

  $ readelf -a ./llvmsubtest3
  ...
     [ 5] _ftrace_branch    PROGBITS         0000000000000000  00000260
          00000000000000a0  0000000000000000  WA       0     0     4
  ...
  Relocation section '.relfunc=null_lseek file->f_mode offset orig' at
  offset 0x490 contains 4 entries:
     Offset          Info           Type           Sym. Value    Sym. Name
  000000000038  000b00000001 unrecognized: 1       0000000000000000 _ftrace_branch
  0000000000b0  000b00000001 unrecognized: 1       0000000000000000 _ftrace_branch
  000000000128  000b00000001 unrecognized: 1       0000000000000000 _ftrace_branch
  0000000001c0  000b00000001 unrecognized: 1       0000000000000000 _ftrace_branch

  Relocation section '.rel_ftrace_branch' at offset 0x4d0 contains 8 entries:
     Offset          Info           Type           Sym. Value    Sym. Name
  000000000000  000200000001 unrecognized: 1       0000000000000000 .L__func__.bpf_func__n
  000000000008  000100000001 unrecognized: 1       0000000000000015 .L.str
  000000000028  000200000001 unrecognized: 1       0000000000000000 .L__func__.bpf_func__n
  000000000030  000100000001 unrecognized: 1       0000000000000015 .L.str
  000000000050  000200000001 unrecognized: 1       0000000000000000 .L__func__.bpf_func__n
  000000000058  000100000001 unrecognized: 1       0000000000000015 .L.str
  000000000078  000200000001 unrecognized: 1       0000000000000000 .L__func__.bpf_func__n
  000000000080  000100000001 unrecognized: 1       0000000000000015 .L.str
  ...

So I think the failure is because you enabled CONFIG_PROFILE_ALL_BRANCHES.

I can reproduce your buggy result by selecting
CONFIG_PROFILE_ALL_BRANCHES in my kbuild:

  $ ./perf test LLVM
  35: LLVM search and compile                    :
  35.1: Basic BPF llvm compile                    : Ok
  35.2: kbuild searching                          : Ok
  35.3: Compile source for BPF prologue generation: FAILED!
  35.4: Compile source for BPF relocation         : Skip

Simply undef CONFIG_PROFILE_ALL_BRANCHES in clang opts not working
because it is introduced by "#include <uapi/linux/fs.h>", which override
cmdline options. So I think the best way is to undefine 'if' inside BPF
script.

Reported-and-Tested-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/20170620183203.2517-1-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf annotate: Return arch from symbol__disassemble() and save it in browser
Jin Yao [Mon, 19 Jun 2017 02:55:56 +0000 (10:55 +0800)]
perf annotate: Return arch from symbol__disassemble() and save it in browser

In annotate browser, we will add support to check fused instructions.
While this is x86-specific feature so we need the annotate browser to
know what the arch it runs on.

symbol__disassemble() has figured out the arch. This patch just lets the
arch return from symbol__disassemble and save the arch in annotate
browser.

Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1497840958-4759-2-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf intel-pt/bts: Remove unused SAMPLE_SIZE defines and bts priv array
Kim Phillips [Fri, 16 Jun 2017 16:23:39 +0000 (11:23 -0500)]
perf intel-pt/bts: Remove unused SAMPLE_SIZE defines and bts priv array

These defines were probably dragged in from sampling support in earlier
patches.  They can be put back when needed.

Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170616112339.3fb6986e4ff33e353008244b@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf coresight: Remove superfluous check before use
Kim Phillips [Thu, 15 Jun 2017 17:55:21 +0000 (12:55 -0500)]
perf coresight: Remove superfluous check before use

The cs_etm_evsel variable is guaranteed to be set at this point in
cs_etm_recording_options().

Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20170615125521.80cc128dc856bc1f2e61b730@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agotools: Adopt __aligned from kernel sources
Arnaldo Carvalho de Melo [Fri, 16 Jun 2017 14:39:15 +0000 (11:39 -0300)]
tools: Adopt __aligned from kernel sources

To have a more compact way to ask the compiler to use a specific
alignment, making tools/ look more like kernel source code.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-8jiem6ubg9rlpbs7c2p900no@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agotools: Adopt __packed from kernel sources
Arnaldo Carvalho de Melo [Fri, 16 Jun 2017 14:39:15 +0000 (11:39 -0300)]
tools: Adopt __packed from kernel sources

To have a more compact way to ask the compiler to not insert alignment
paddings in a struct, making tools/ look more like kernel source code.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-byp46nr7hsxvvyc9oupfb40q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agotools: Adopt noinline from kernel sources
Arnaldo Carvalho de Melo [Fri, 16 Jun 2017 14:39:15 +0000 (11:39 -0300)]
tools: Adopt noinline from kernel sources

To have a more compact way to ask the compiler not to inline a function
and to make tools/ source code look like kernel code.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-bis4pqxegt6gbm5dlqs937tn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf tools: Use __maybe_unused consistently
Arnaldo Carvalho de Melo [Fri, 16 Jun 2017 15:18:27 +0000 (12:18 -0300)]
perf tools: Use __maybe_unused consistently

Instead of defining __unused or redefining __maybe_unused.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-4eleto5pih31jw1q4dypm9pf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agotools: Adopt __scanf from kernel sources
Arnaldo Carvalho de Melo [Fri, 16 Jun 2017 14:57:54 +0000 (11:57 -0300)]
tools: Adopt __scanf from kernel sources

To have a more compact way to ask the compiler to perform scanf like
argument validation.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-yzqrhfjrn26lqqtwf55egg0h@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agotools: Adopt __printf from kernel sources
Arnaldo Carvalho de Melo [Fri, 16 Jun 2017 14:57:54 +0000 (11:57 -0300)]
tools: Adopt __printf from kernel sources

To have a more compact way to ask the compiler to perform printf like
vargargs validation.

v2: Fixed up build on arm, squashing a patch by Kim Phillips, thanks!

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-dopkqmmuqs04cxzql0024nnu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agotools: Adopt __noreturn from kernel sources
Arnaldo Carvalho de Melo [Fri, 16 Jun 2017 14:39:15 +0000 (11:39 -0300)]
tools: Adopt __noreturn from kernel sources

To have a more compact way to specify that a function doesn't return,
instead of the open coded:

__attribute__((noreturn))

And use it instead of the tools/perf/ specific variation, NORETURN.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-l0y144qzixcy5t4c6i7pdiqj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf script: Allow adding and removing fields
Andi Kleen [Fri, 2 Jun 2017 15:48:10 +0000 (08:48 -0700)]
perf script: Allow adding and removing fields

With 'perf script' it is common that we just want to add or remove a field.

Currently this requires figuring out the long list of default fields and
specifying them first, and then adding/removing the new field.

This patch adds a new + - syntax to merely add or remove fields,
that allows more succint and clearer command lines

For example to remove the comm field from PMU samples:

Previously

  $ perf script -F tid,cpu,time,event,sym,ip,dso,period | head -1
  swapper  0 [000] 504345.383126:          1 cycles:  ffffffff90060c66 native_write_msr ([kernel.kallsyms])

with the new syntax

  perf script -F -comm | head -1
  0 [000] 504345.383126:          1 cycles:  ffffffff90060c66 native_write_msr ([kernel.kallsyms])

The new syntax cannot be mixed with normal overriding.

v2: Fix example in description. Use tid vs pid. No functional changes.
v3: Don't skip initialization when user specified explicit type.
v4: Rebase. Remove empty line.

Committer testing:

  # perf record -a usleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 1.748 MB perf.data (14 samples) ]

Without a explicit field list specified via -F, defaults to:

  # perf script | head -2
      perf 6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
   swapper    0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
  #

Which is equivalent to:

  # perf script -F comm,tid,cpu,time,period,event,ip,sym,dso | head -2
      perf 6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
   swapper    0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
  #

So if we want to remove the comm, as in your original example, we would have to
figure out the default field list and remove ' comm' from it:

  # perf script -F tid,cpu,time,period,event,ip,sym,dso | head -2
   6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
      0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
  #

With your patch this becomes simpler, one can remove fields by prefixing them
with '-':

  # perf script -F -comm | head -2
  6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
     0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
  #

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Milian Wolff <milian.wolff@kdab.com>
Link: http://lkml.kernel.org/r/20170602154810.15875-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf config: Invert an if statement to reduce nesting in cmd_config()
Taeung Song [Mon, 8 May 2017 11:07:30 +0000 (20:07 +0900)]
perf config: Invert an if statement to reduce nesting in cmd_config()

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1494241650-32210-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf annotate browser: Display titles in left frame
Jin Yao [Thu, 4 May 2017 14:58:15 +0000 (22:58 +0800)]
perf annotate browser: Display titles in left frame

The annotate browser is divided into 2 frames. Left frame contains 3
columns (some platforms only have one column).

For example:

                   │26  int compute_flag()
                   │27  {
 22.80  1.20       │      sub    $0x8,%rsp
                   │25          int i;
                   │
                   │27          i = rand() % 2;
 22.78  1.20     1 │    → callq  rand@plt

While it's hard for user to understand what the data is.

This patch adds the titles "Percent", "IPC" and "Cycle" on columns.

Percent  IPC Cycle │
                   │25  __attribute__((noinline))
                   │26  int compute_flag()
                   │27  {
 22.80  1.20       │      sub    $0x8,%rsp
                   │25          int i;
                   │
                   │27          i = rand() % 2;
 22.78  1.20     1 │    → callq  rand@plt

The titles are displayed at row 0 of annotate browser if row 0 doesn't
have values of percent, ipc and cycle.

Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/1493909895-9668-3-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf report: Remove unnecessary check in annotate_browser_write()
Jin Yao [Thu, 4 May 2017 14:58:14 +0000 (22:58 +0800)]
perf report: Remove unnecessary check in annotate_browser_write()

In annotate_browser_write(),

        if (dl->offset != -1 && percent_max != 0.0) {
                if (percent_max != 0.0) {
...
                }
                ...
        }

The second check of (percent_max != 0.0) is not necessary, remove it.

Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/1493909895-9668-2-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoMerge remote-tracking branch 'tip/perf/urgent' into perf/core
Arnaldo Carvalho de Melo [Mon, 19 Jun 2017 18:14:35 +0000 (15:14 -0300)]
Merge remote-tracking branch 'tip/perf/urgent' into perf/core

Merge branch 'perf/urgent' into perf/core, to pick up fixes

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoLinux 4.12-rc6
Linus Torvalds [Mon, 19 Jun 2017 14:19:37 +0000 (22:19 +0800)]
Linux 4.12-rc6

7 years agomm: larger stack guard gap, between vmas
Hugh Dickins [Mon, 19 Jun 2017 11:03:24 +0000 (04:03 -0700)]
mm: larger stack guard gap, between vmas

Stack guard page is a useful feature to reduce a risk of stack smashing
into a different mapping. We have been using a single page gap which
is sufficient to prevent having stack adjacent to a different mapping.
But this seems to be insufficient in the light of the stack usage in
userspace. E.g. glibc uses as large as 64kB alloca() in many commonly
used functions. Others use constructs liks gid_t buffer[NGROUPS_MAX]
which is 256kB or stack strings with MAX_ARG_STRLEN.

This will become especially dangerous for suid binaries and the default
no limit for the stack size limit because those applications can be
tricked to consume a large portion of the stack and a single glibc call
could jump over the guard page. These attacks are not theoretical,
unfortunatelly.

Make those attacks less probable by increasing the stack guard gap
to 1MB (on systems with 4k pages; but make it depend on the page size
because systems with larger base pages might cap stack allocations in
the PAGE_SIZE units) which should cover larger alloca() and VLA stack
allocations. It is obviously not a full fix because the problem is
somehow inherent, but it should reduce attack space a lot.

One could argue that the gap size should be configurable from userspace,
but that can be done later when somebody finds that the new 1MB is wrong
for some special case applications.  For now, add a kernel command line
option (stack_guard_gap) to specify the stack gap size (in page units).

Implementation wise, first delete all the old code for stack guard page:
because although we could get away with accounting one extra page in a
stack vma, accounting a larger gap can break userspace - case in point,
a program run with "ulimit -S -v 20000" failed when the 1MB gap was
counted for RLIMIT_AS; similar problems could come with RLIMIT_MLOCK
and strict non-overcommit mode.

Instead of keeping gap inside the stack vma, maintain the stack guard
gap as a gap between vmas: using vm_start_gap() in place of vm_start
(or vm_end_gap() in place of vm_end if VM_GROWSUP) in just those few
places which need to respect the gap - mainly arch_get_unmapped_area(),
and and the vma tree's subtree_gap support for that.

Original-patch-by: Oleg Nesterov <oleg@redhat.com>
Original-patch-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Tested-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoMerge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Linus Torvalds [Mon, 19 Jun 2017 08:50:09 +0000 (16:50 +0800)]
Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "Stream of fixes has slowed down, only a few this week:

   - Some DT fixes for Allwinner platforms, and addition of a clock to
     the R_CCU clock controller that had been missed.

   - A couple of small DT fixes for am335x-sl50"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: allwinner: a64: Add PLL_PERIPH0 clock to the R_CCU
  ARM: sunxi: h3-h5: Add PLL_PERIPH0 clock to the R_CCU
  ARM: dts: am335x-sl50: Fix cannot claim requested pins for spi0
  ARM: dts: am335x-sl50: Fix card detect pin for mmc1
  arm64: allwinner: h5: Remove syslink to shared DTSI
  ARM: sunxi: h3/h5: fix the compatible of R_CCU

7 years agoMerge tag 'sunxi-fixes-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git...
Olof Johansson [Mon, 19 Jun 2017 03:42:21 +0000 (20:42 -0700)]
Merge tag 'sunxi-fixes-for-4.12' of https://git./linux/kernel/git/sunxi/linux into fixes

Allwinner fixes for 4.12

A few fixes around the PRCM support that got in 4.12 with a wrong
compatible, and a missing clock in the binding.

* tag 'sunxi-fixes-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: allwinner: a64: Add PLL_PERIPH0 clock to the R_CCU
  ARM: sunxi: h3-h5: Add PLL_PERIPH0 clock to the R_CCU
  arm64: allwinner: h5: Remove syslink to shared DTSI
  ARM: sunxi: h3/h5: fix the compatible of R_CCU

Signed-off-by: Olof Johansson <olof@lixom.net>
7 years agoMerge tag 'omap-for-v4.12/fixes-sl50' of git://git.kernel.org/pub/scm/linux/kernel...
Olof Johansson [Mon, 19 Jun 2017 01:55:12 +0000 (18:55 -0700)]
Merge tag 'omap-for-v4.12/fixes-sl50' of git://git./linux/kernel/git/tmlind/linux-omap into fixes

Two fixes for am335x-sl50 to fix a boot time error
for claiming SPI pins, and to fix a SDIO card detect
pin for production version of the device.

* tag 'omap-for-v4.12/fixes-sl50' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am335x-sl50: Fix cannot claim requested pins for spi0
  ARM: dts: am335x-sl50: Fix card detect pin for mmc1

Signed-off-by: Olof Johansson <olof@lixom.net>
7 years agoMerge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Linus Torvalds [Mon, 19 Jun 2017 00:25:05 +0000 (09:25 +0900)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost

Pull virtio bugfix from Michael Tsirkin:
 "It turns out balloon does not handle IOMMUs correctly. We should fix
  that at some point, for now let's just disable this configuration"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio_balloon: disable VIOMMU support

7 years agoMerge branch 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Mon, 19 Jun 2017 00:20:25 +0000 (09:20 +0900)]
Merge branch 'i2c/for-current-fixed' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "Two driver bugfixes"

* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: ismt: fix wrong device address when unmap the data buffer
  i2c: rcar: use correct length when unmapping DMA

7 years agoMerge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Linus Torvalds [Mon, 19 Jun 2017 00:01:01 +0000 (09:01 +0900)]
Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus

Pull MIPS fixes from Ralf Baechle:

 - Three highmem fixes:
    + Fixed mapping initialization
    + Adjust the pkmap location
    + Ensure we use at most one page for PTEs

 - Fix makefile dependencies for .its targets to depend on vmlinux

 - Fix reversed condition in BNEZC and JIALC software branch emulation

 - Only flush initialized flush_insn_slot to avoid NULL pointer
   dereference

 - perf: Remove incorrect odd/even counter handling for I6400

 - ftrace: Fix init functions tracing

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: .its targets depend on vmlinux
  MIPS: Fix bnezc/jialc return address calculation
  MIPS: kprobes: flush_insn_slot should flush only if probe initialised
  MIPS: ftrace: fix init functions tracing
  MIPS: mm: adjust PKMAP location
  MIPS: highmem: ensure that we don't use more than one page for PTEs
  MIPS: mm: fixed mappings: correct initialisation
  MIPS: perf: Remove incorrect odd/even counter handling for I6400

7 years agovirtio_balloon: disable VIOMMU support
Michael S. Tsirkin [Tue, 13 Jun 2017 17:56:44 +0000 (20:56 +0300)]
virtio_balloon: disable VIOMMU support

virtio balloon bypasses the DMA API entirely so does not support the
VIOMMU right now.  It's not clear we need that support, for now let's
just make sure we don't pretend to support it.

Cc: stable@vger.kernel.org
Cc: Wei Wang <wei.w.wang@intel.com>
Fixes: 1a937693993f ("virtio: new feature to detect IOMMU device quirk")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
7 years agoMerge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 18 Jun 2017 09:49:12 +0000 (18:49 +0900)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
 "Two fixlets for x86:

   - Handle WARN_ONs proper with the new UD based WARN implementation

   - Disable 1G mappings when 2M mappings are disabled by kmemleak or
     debug_pagealloc. Otherwise 1G mappings might still be used,
     confusing the debug mechanisms"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Disable 1GB direct mappings when disabling 2MB mappings
  x86/debug: Handle early WARN_ONs proper

7 years agoMerge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 18 Jun 2017 09:46:51 +0000 (18:46 +0900)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull timer fixes from Thomas Gleixner:
 "Three fixlets for timers:

   - Two hot-fixes for the alarmtimer based posix timers, which prevent
     a nasty DOS by self rescheduling timers. The proper cleanup of that
     mess is queued for 4.13

   - Make a function static"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick/broadcast: Make tick_broadcast_setup_oneshot() static
  alarmtimer: Rate limit periodic intervals
  alarmtimer: Prevent overflow of relative timers

7 years agoMerge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 18 Jun 2017 09:45:17 +0000 (18:45 +0900)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Thomas Gleixner:
 "Two small fixes for the schedulre core:

   - Use the proper switch_mm() variant in idle_task_exit() because that
     code is not called with interrupts disabled.

   - Fix a confusing typo in a printk"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/core: Idle_task_exit() shouldn't use switch_mm_irqs_off()
  sched/fair: Fix typo in printk message

7 years agoMerge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 18 Jun 2017 09:42:31 +0000 (18:42 +0900)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Thomas Gleixner:
 "Three fixes for the perf user space side:

   - Fix the probing of precise_ip level, which got broken recently for
     x86.

   - Unbreak the ARCH=x86_64 build

   - Report module before trying to unwind into the module code, which
     avoids broken stack frames displayed"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf unwind: Report module before querying isactivation in dwfl unwind
  perf tools: Fix build with ARCH=x86_64
  perf evsel: Fix probing of precise_ip level for default cycles event

7 years agoMerge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 18 Jun 2017 09:40:41 +0000 (18:40 +0900)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull irq fix from Thomas Gleixner:
 "Add a missing resource release to an error path"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Release resources in __setup_irq() error path

7 years agoMerge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 18 Jun 2017 09:38:42 +0000 (18:38 +0900)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull objtool fix from Thomas Gleixner:
 "A single fix which adds fortify_panic to the list of no return
  functions"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Add fortify_panic as __noreturn function

7 years agoMerge tag 'led_fixes_for_4.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 17 Jun 2017 23:51:35 +0000 (08:51 +0900)]
Merge tag 'led_fixes_for_4.12-rc6' of git://git./linux/kernel/git/j.anaszewski/linux-leds

Pull LED fixes from Jacek Anaszewski:
 "Two LED fixes:

   - fix signal source assignment for leds-bcm6328

   - revert patch that intended to fix LED behavior on suspend but it
     had a side effect preventing suspend at all due to uevent being
     sent on trigger removal"

* tag 'led_fixes_for_4.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  Revert "leds: handle suspend/resume in heartbeat trigger"
  leds: bcm6328: fix signal source assignment for leds 4 to 7