drm/amdgpu/gfx9: Enable bad opcode interrupt

For the bad opcode case, it will cause CP/ME hang.
The firmware will prevent the ME side from hanging by raising a bad opcode interrupt.
And the driver needs to perform a vmid reset when receiving the interrupt.

Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx12: Enable bad opcode interrupt

For the bad opcode case, it will cause CP/ME hang.
The firmware will prevent the ME side from hanging by raising a bad opcode interrupt.
And the driver needs to perform a vmid reset when receiving the interrupt.

v2: update irq naming (drop priv) (Alex)

Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx10: Enable bad opcode interrupt

For the bad opcode case, it will cause CP/ME hang.
The firmware will prevent the ME side from hanging by raising a bad opcode interrupt.
And the driver needs to perform a vmid reset when receiving the interrupt.

v2: update irq naming (drop priv) (Alex)

Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx11: Enable bad opcode interrupt

For the bad opcode case, it will cause CP/ME hang.
The firmware will prevent the ME side from hanging by raising a bad opcode interrupt.
And the driver needs to perform a vmid reset when receiving the interrupt.

v2: update irq naming (drop priv) (Alex)

Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx: add bad opcode interrupt

Add the irq source for bad opcodes.

Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx9: properly handle error ints on all pipes

Need to handle the interrupt enables for all pipes.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx12: properly handle error ints on all pipes

Need to handle the interrupt enables for all pipes.

v2: fix indexing (Jessie)

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx11: properly handle error ints on all pipes

Need to handle the interrupt enables for all pipes.

v2: fix indexing (Jessie)

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx10: properly handle error ints on all pipes

Need to handle the interrupt enables for all pipes.

v2: fix indexing (Jessie)

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx12: enable wave kill for compute queues

It should work the same for compute as well as gfx.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx11: enable wave kill for compute queues

It should work the same for compute as well as gfx.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx10: enable wave kill for compute queues

It should work the same for compute as well as gfx.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix eeprom max record count

The eeprom table is empty before initializing,
set eeprom table version first before initializing.

Changed from V1:
Reuse amdgpu_ras_set_eeprom_table_version function

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add NULL check for clk_mgr in dcn32_init_hw

This commit addresses a potential null pointer dereference issue in the
`dcn32_init_hw` function. The issue could occur when `dc->clk_mgr` is
null.

The fix adds a check to ensure `dc->clk_mgr` is not null before
accessing its functions. This prevents a potential null pointer
dereference.

Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn32/dcn32_hwseq.c:961 dcn32_init_hw() error: we previously assumed 'dc->clk_mgr' could be null (see line 782)

Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix ras UE error injection failure issue

The ras command shared memory is allocated from
VRAM and the response status of the command
buffer will not be zero due to gpu being in
fatal error state after ras UE error injection.

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Ensure user queue buffers residency

Add atomic queue_refcount to struct bo_va, return -EBUSY to fail unmap
BO from the GPU if the bo_va queue_refcount is not zero.

Create queue to increase the bo_va queue_refcount, destroy queue to
decrease the bo_va queue_refcount, to ensure the queue buffers mapped on
the GPU when queue is active.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx9.4.3: implement wave kill for compute queues

Based on gfx9.0 implementation.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add print support for sdma_v_4_4_2 ip_dump

Add print support for ip dump for sdma_v_4_4_2 in
devcoredump.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add NULL check for clk_mgr and clk_mgr->funcs in dcn401_init_hw

This commit addresses a potential null pointer dereference issue in the
`dcn401_init_hw` function. The issue could occur when `dc->clk_mgr` or
`dc->clk_mgr->funcs` is null.

The fix adds a check to ensure `dc->clk_mgr` and `dc->clk_mgr->funcs` is
not null before accessing its functions. This prevents a potential null
pointer dereference.

Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn401/dcn401_hwseq.c:416 dcn401_init_hw() error: we previously assumed 'dc->clk_mgr' could be null (see line 225)

Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add NULL check for clk_mgr and clk_mgr->funcs in dcn30_init_hw

This commit addresses a potential null pointer dereference issue in the
`dcn30_init_hw` function. The issue could occur when `dc->clk_mgr` or
`dc->clk_mgr->funcs` is null.

The fix adds a check to ensure `dc->clk_mgr` and `dc->clk_mgr->funcs` is
not null before accessing its functions. This prevents a potential null
pointer dereference.

Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:789 dcn30_init_hw() error: we previously assumed 'dc->clk_mgr' could be null (see line 628)

Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Validate user queue buffers

Find user queue rptr, ring buf, eop buffer and cwsr area BOs, and
check BOs are mapped on the GPU with correct size and take the BO
reference.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx9: enable wave kill for compute queues

It should work the same for compute as well as gfx.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx8: enable wave kill for compute queues

It should work the same for compute as well as gfx.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx7: enable wave kill for compute queues

It should work the same for compute as well as gfx.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add null check for head_pipe in dcn32_acquire_idle_pipe_for_head_pipe_in_layer

This commit addresses a potential null pointer dereference issue in the
`dcn32_acquire_idle_pipe_for_head_pipe_in_layer` function. The issue
could occur when `head_pipe` is null.

The fix adds a check to ensure `head_pipe` is not null before asserting
it. If `head_pipe` is null, the function returns NULL to prevent a
potential null pointer dereference.

Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn32/dcn32_resource.c:2690 dcn32_acquire_idle_pipe_for_head_pipe_in_layer() error: we previously assumed 'head_pipe' could be null (see line 2681)

Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add null check for head_pipe in dcn201_acquire_free_pipe_for_layer

This commit addresses a potential null pointer dereference issue in the
`dcn201_acquire_free_pipe_for_layer` function. The issue could occur
when `head_pipe` is null.

The fix adds a check to ensure `head_pipe` is not null before asserting
it. If `head_pipe` is null, the function returns NULL to prevent a
potential null pointer dereference.

Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn201/dcn201_resource.c:1016 dcn201_acquire_free_pipe_for_layer() error: we previously assumed 'head_pipe' could be null (see line 1010)

Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix index out of bounds in DCN30 color transformation

This commit addresses a potential index out of bounds issue in the
`cm3_helper_translate_curve_to_hw_format` function in the DCN30 color
management module. The issue could occur when the index 'i' exceeds the
number of transfer function points (TRANSFER_FUNC_POINTS).

The fix adds a check to ensure 'i' is within bounds before accessing the
transfer function points. If 'i' is out of bounds, the function returns
false to indicate an error.

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:180 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:181 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:182 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max

Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Implement bounds check for stream encoder creation in DCN401

'stream_enc_regs' array is an array of dcn10_stream_enc_registers
structures. The array is initialized with four elements, corresponding
to the four calls to stream_enc_regs() in the array initializer. This
means that valid indices for this array are 0, 1, 2, and 3.

The error message 'stream_enc_regs' 4 <= 5 below, is indicating that
there is an attempt to access this array with an index of 5, which is
out of bounds. This could lead to undefined behavior

Here, eng_id is used as an index to access the stream_enc_regs array. If
eng_id is 5, this would result in an out-of-bounds access on the
stream_enc_regs array.

Thus fixing Buffer overflow error in dcn401_stream_encoder_create

Found by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn401/dcn401_resource.c:1209 dcn401_stream_encoder_create() error: buffer overflow 'stream_enc_regs' 4 <= 5

Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix index out of bounds in degamma hardware format translation

Fixes index out of bounds issue in
`cm_helper_translate_curve_to_degamma_hw_format` function. The issue
could occur when the index 'i' exceeds the number of transfer function
points (TRANSFER_FUNC_POINTS).

The fix adds a check to ensure 'i' is within bounds before accessing the
transfer function points. If 'i' is out of bounds the function returns
false to indicate an error.

Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:594 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:595 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:596 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max

Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix index out of bounds in DCN30 degamma hardware format translation

This commit addresses a potential index out of bounds issue in the
`cm3_helper_translate_curve_to_degamma_hw_format` function in the DCN30
color  management module. The issue could occur when the index 'i'
exceeds the  number of transfer function points (TRANSFER_FUNC_POINTS).

The fix adds a check to ensure 'i' is within bounds before accessing the
transfer function points. If 'i' is out of bounds, the function returns
false to indicate an error.

Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:338 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:339 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:340 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max

Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add kdoc entry for 'bs_coeffs_updated' in dpp401_dscl_program_isharp

Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/dpp/dcn401/dcn401_dpp_dscl.c:961: warning: Function parameter or struct member 'bs_coeffs_updated' not described in 'dpp401_dscl_program_isharp'

Fixes: 94beb4ac1b3b ("drm/amd/display: ensure EASF and ISHARP coefficients are programmed together")
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.293

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove unused folder

dc/{dcn401,dcn303} are unused since the files in it got moved under their
respective new components location. Hence they are no longer necessary

Fixes: 2d62bb450ed1 ("drm/amd/display: Refactor DCN3X into component folder")
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove duplicate HWSS interfaces

[Why]
Some interface functions are defined in both the public and private HWSS
interfaces, which can lead to confusion and runtime issues, therefore
the duplicates should be eliminated.

[How]
- power_down should only be private, because it's only used within HWSS.
- update_plane_addr should only be public, as it's used outside HWSS.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Various DML2 fixes for FAMS2

The disable fams2 operation was reworked, but some of the old code
remained. This commit removes the disable_fams2_drr from the
dml2_stream_parameters.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove old comments

Remove some old comments from DCN32/321.

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Check link_res->hpo_dp_link_enc before using it

[WHAT & HOW]
Functions dp_enable_link_phy and dp_disable_link_phy can pass link_res
without initializing hpo_dp_link_enc and it is necessary to check for
null before dereferencing.

This fixes 1 FORWARD_NULL issue reported by Coverity.

Fixes: 0beca868cde8 ("drm/amd/display: Check link_res->hpo_dp_link_enc before using it")
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add MST debug message when link detection fails

[WHY & HOW]
dc_link_detect returns a boolean value which can be used to print debug
messages when it fails.

This fixes 1 CHECKED_RETURN issue reported by Coverity.

Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Check top sink only when multiple streams for DP2

[why]
When switching from extended to second display only
mode, the top remote sink is not removed while the top stream
itself is released. This causes DML to think there is no
DP2 output encoder because top remote sink does not match
with the second stream and disables DTBCLK and causes
hang.

[how]
For DP2.0 MST hubs, only treat 1st remote sink as an encoder
only when there are multiple displays connected.

Reviewed-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix Potential Null Dereference

[what & why]
System hang after s4 regression points to code change here.
Removing possible NULL dereference.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add helper function to check for non-address fast updates

[Why/How]
Need to identify which fast updates will update more than just the
address.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: rename dcn401_soc to dcn4_variant_a_soc

To distinguish between different soc with same DCN IP, use variants
starting with alphabets

Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: rename dcn3/dcn4 to more sound terms

Use more accurate names to refer to the asic architecture.
dcn3 in DML actually refers to DCN32 and DCN321, so rename it to dcn32x
dcn4 refers to any DCN4x soc., and hence rename dcn4 to dcn4x

Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add source select helper functions

[why & how]
Add source select helpers based on DCCG spec

Reviewed-by: Daniel Miess <daniel.miess@amd.com>
Signed-off-by: Hansen Dsouza <hansen.dsouza@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Check if Mode is Supported Before Returning Result

[Why]
Even if the mode is not supported dml2_check_mode_supported() would still return true.
This causes an unsupported mode to be programmed.

[How]
Check if the mode is supported or not and return the proper result.

Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Signed-off-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: ensure EASF and ISHARP coefficients are programmed together

[Why]
EASF coefficients are programmed to RAM and then RAM selector is toggled.
 ISHARP coefficients are programmed after so they will not be in the same
 RAM block

[How]
Move ISHARP programming before EASF programming
Add flag if ISHARP coefficients are updated.  If so, then
 force EASF coefficients programming

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix visual confirm bug for SubVP

[Why]
Visual confirm was incorrect on dual monitor SubVP setup

[How]
Adjusted p_state assignment for dual monitor SubVP setup

Signed-off-by: Ryan Seto <ryanseto@amd.com>
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add RCG helper functions

[why & how]
Add standard RCG helpers based on DCCG spec

Reviewed-by: Daniel Miess <daniel.miess@amd.com>
Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Signed-off-by: Hansen Dsouza <hansen.dsouza@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove ASSERT if significance is zero in math_ceil2

In the DML math_ceil2 function, there is one ASSERT if the significance
is equal to zero. However, significance might be equal to zero
sometimes, and this is not an issue for a ceil function, but the current
ASSERT will trigger warnings in those cases. This commit removes the
ASSERT if the significance is equal to zero to avoid unnecessary noise.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactoring HPO

[Why]
To refactor HPO files

[How]
Moved hpo related files to specific hpo folder and
update Makefiles.

Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Revalla Hari Krishna <harikrishna.revalla@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add private data type for RCG

[why & how]
Add private data types for better RCG control

Reviewed-by: Chris Park <chris.park@amd.com>
Reviewed-by: Yihan Zhu <yihan.zhu@amd.com>
Signed-off-by: Hansen Dsouza <hansen.dsouza@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Check for NULL pointer

[why & how]
Need to make sure plane_state is initialized
before accessing its members.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Xi (Alex) Liu <xi.liu@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove hardmax usage for dcn401

[WHY&HOW]
Hardmax message will be retired for dcn4, so this removes it.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Refactor queue wptr_bo GART mapping

Add helper function kfd_queue_acquire_buffers to get queue wptr_bo
reference from queue write_ptr if it is mapped to the KFD node with
expected size.

Add wptr_bo to structure queue_properties because structure queue is
allocated after queue buffers are validated, then we can remove wptr_bo
parameter from pqm_create_queue.

Rename structure queue wptr_bo_gart to hold wptr_bo reference for GART
mapping and umapping. Move MES wptr_bo_gart mapping to init_user_queue,
the same location with queue ctx_bo GART mapping.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add sdma_v4_4_2 ip dump for devcoredump

Add ip dump for sdma_v4_4_2 for devcoredump for all
instances of sdma.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add print support for sdma_v_4_0 ip_dump

Add print support for ip dump for sdma_v_4_0 in
devcoredump.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: amdkfd_free_gtt_mem clear the correct pointer

Pass pointer reference to amdgpu_bo_unref to clear the correct pointer,
otherwise amdgpu_bo_unref clear the local variable, the original pointer
not set to NULL, this could cause use-after-free bug.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: kfd_bo_mapped_dev support partition

Change amdgpu_amdkfd_bo_mapped_to_dev to use drm_priv as parameter
instead of adev, to support spatial partition. This is only used by CRIU
checkpoint restore now. No functional change.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: Use offsets local to VCN/JPEG in VF

For VCN/JPEG 4.0.3, use only the local addressing scheme.

- Mask bit higher than AID0 range

v2
remain the case for mmhub use master XCC

Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add empty HDP flush function to VCN v4.0.3

VCN 4.0.3 does not HDP flush with RRMT enabled. Instead, mmsch
will do the HDP flush.

This change is necessary for VCN v4.0.3, no need for backward compatibility

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add empty HDP flush function to JPEG v4.0.3

JPEG v4.0.3 doesn't support HDP flush when RRMT is enabled. Instead,
mmsch fw will do the flush.

This change is necessary for JPEG v4.0.3, no need for backward compatibility

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: disallow multiple BO_HANDLES chunks in one submit

Before this commit, only submits with both a BO_HANDLES chunk and a
'bo_list_handle' would be rejected (by amdgpu_cs_parser_bos).

But if UMD sent multiple BO_HANDLES, what would happen is:
* only the last one would be really used
* all the others would leak memory as amdgpu_cs_p1_bo_handles would
  overwrite the previous p->bo_list value

This commit rejects submissions with multiple BO_HANDLES chunks to
match the implementation of the parser.

Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add sdma_v4_0 ip dump for devcoredump

Add ip dump for sdma_v4_0 for devcoredump for all
instances of sdma.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add print support for sdma_v_7_0 ip_dump

Add print support for ip dump for sdma_v_7_0 in
devcoredump.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Fix uninitialized variable warnings

Return 0 to avoid returning an uninitialized variable r.

Cc: stable@vger.kernel.org
Fixes: 230dd6bb6117 ("drm/amd/amdgpu: implement mode2 reset on smu_v13_0_10")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix a possible null pointer dereference

In amdgpu_connector_add_common_modes(), the return value of drm_cvt_mode()
is assigned to mode, which will lead to a NULL pointer dereference on
failure of drm_cvt_mode(). Add a check to avoid npd.

Cc: stable@vger.kernel.org
Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix atomics on GFX12

If PCIe supports atomics, configure register to prevent DF from
breaking atomics in separate load/store operations.

Signed-off-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add sdma_v7_0 ip dump for devcoredump

Add ip dump for sdma_v7_0 for devcoredump for all
instances of sdma.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/sdma5.2: Update wptr registers as well as doorbell

We seem to have a case where SDMA will sometimes miss a doorbell
if GFX is entering the powergating state when the doorbell comes in.
To workaround this, we can update the wptr via MMIO, however,
this is only safe because we disallow gfxoff in begin_ring() for
SDMA 5.2 and then allow it again in end_ring().

Enable this workaround while we are root causing the issue with
the HW team.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/3440
Tested-by: Friedrich Vock <friedrich.vock@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add 'pstate_keepout' kdoc entry in 'optc1_program_timing'

Fixes the below with gcc W=1:
Function parameter or struct member 'pstate_keepout' not described in 'optc1_program_timing'

Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: fix null pointer dereference in radeon_add_common_modes

In radeon_add_common_modes(), the return value of drm_cvt_mode() is
assigned to mode, which will lead to a possible NULL pointer dereference
on failure of drm_cvt_mode(). Add a check to avoid npd.

Cc: stable@vger.kernel.org
Fixes: d50ba256b5f1 ("drm/kms: start adding command line interface using fb.")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove unused code

Remove unused code.

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: optimize logging deferred error info

1. Use pa_pfn as the radix-tree key index to log
   deferred error info.
2. Use local array to store a row of bad pages.

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: optimize umc v12 address conversion function

Split into 3 parts:
1. Convert soc physical address via ras ta.
2. Expand bad pages from soc physical address.
3. Dump bad address info.

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: change drm_dev_alloc to devm_drm_dev_alloc

"drm_dev_alloc" is deprecated, in order to use the newer "devm_drm_dev_alloc",
the "drm_device" is stored inside "radeon_device", by changing "rdev_to_drm(rdev)"
other functions still gain access to the member "drm_device". Also, "devm_drm_dev_alloc"
is now allocating "radeon_device", allocation inside "radeon_driver_load_kms" has to be
removed.

In "radeon_device_init", it originally assigned "rdev->dev" etc. However it is already
done right after "devm_drm_dev_alloc" as you can see down below. It is better remove them.

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Wu Hoi Pok <wuhoipok@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: change rdev->ddev to rdev_to_drm(rdev)

This patch changes the way "drm_device" is accessed. It uses "rdev_to_drm(rdev)"
instead of accessing the struct member directly.

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Wu Hoi Pok <wuhoipok@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: add helper rdev_to_drm(rdev)

Add helper rdev_to_drm(rdev), similar to amdgpu, most function should
access the "drm_device" with "rdev_to_drm(rdev)" instead, where amdgpu has
"adev_to_drm(adev)". It also makes changing from "*drm_device" to "drm_device"
in "radeon_devicce" later on easier.

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Wu Hoi Pok <wuhoipok@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: use variable flags as parameter

To be consistent with amdgpu driver, use "flags" as the parameter because
it is already assigned as "ent->driver_data".

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Wu Hoi Pok <wuhoipok@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: remove load callback from kms_driver

The ".load" callback in "struct drm_driver" is deprecated. In order to remove
the callback, we have to manually call "radeon_driver_load_kms" instead.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Wu Hoi Pok <wuhoipok@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: change variable name "dev" to "ddev" for consistency

In the probe function of amdgpu, it uses "ddev" as the name of "struct drm_device *",
so I suggest renaming it to be consistent.

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Wu Hoi Pok <wuhoipok@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.292

* FW Release 0.0.225.0
* DML2 fixes
* Allow display DCC for DCN401
* Refactor DWB, OPP, MPC, MMHUBBUB
* Fix dscclk Programming issue on DCN401

Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove unused dml2_core_ip_params struct

Acked-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove unnecessary DSC power gating for DCN401

[Why]
In some cases during topology changes, a pipe that was used to drive a
stream being removed can be re-assigned to drive a different stream. In
these cases, DSC power gating is not handled properly, leading to
situations where DSC is being setup while power gated.

[How]
 - remove enable_stream_gating and disable_stream_gating for DCN401

Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: free bo used for dmub bounding box

fix a memleak introduced by not removing the buffer object for use with
early dmub bounding box value storage

Fixes: 234e94555800 ("drm/amd/display: Enable copying of bounding box data from VBIOS DMUB")
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add visual confirm for Idle State

[Why]
Visual Confirm would tell us if it ever
entered idle state.

[How]
Add debug option for IPS visual confirm

Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Set Cursor Matrix to bypass instead of Input Plane

why:
When the cursor disappears/reappears on fullscreen video, there is a
short transitional period where the cursor's color matrix is using the
same format as the video plane. This sets the cursor to the wrong color
momentarily before the UI plane appears, correcting the color.

how:
Instead of defaulting to using the color space from the input plane,
default to bypass mode.

Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Daniel Sa <daniel.sa@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Check stream pointer is initialized before accessing

[why & how]
We calculate static screen wait frames based
on the current timing info in the active stream.
If stream is not initialized, then we should skip
the calculation and go with the default values.

Reviewed-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Export additional FAMS2 global configuration options from DML

[WHY&HOW]
Some global configuration options were previously hardcoded in DC, now they are
exported by DML and sent to FW.

Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactoring DWB related files from dcn30 Files

[Why]
To refactor DWB related files from dcn30 Files

[How]
Moved DWB related files from dcn30 to specific DWB folder and
updated Makefiles to fix Compilation.

Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Mudimela <lmudimel@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add dmcub support check

[Why & How]
For DCN harvest case, if there is no dmcub support, we should return false
to avoid bugcheck later.

Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Fudongwang <fudong.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Increase array size of dummy_boolean

[WHY]
dml2_core_shared_mode_support and dml_core_mode_support access the third
element of dummy_boolean, i.e. hw_debug5 = &s->dummy_boolean[2], when
dummy_boolean has size of 2. Any assignment to hw_debug5 causes an
OVERRUN.

[HOW]
Increase dummy_boolean's array size to 3.

This fixes 2 OVERRUN issues reported by Coverity.

Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Check null pointers before multiple uses

[WHAT & HOW]
Poniters, such as stream_enc and dc->bw_vbios, are null checked previously
in the same function, so Coverity warns "implies that stream_enc and
dc->bw_vbios might be null". They are used multiple times in the
subsequent code and need to be checked.

This fixes 10 FORWARD_NULL issues reported by Coverity.

Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Check null pointers before used

[WHAT & HOW]
Poniters, such as dc->clk_mgr, are null checked previously in the same
function, so Coverity warns "implies that "dc->clk_mgr" might be null".
As a result, these pointers need to be checked when used again.

This fixes 10 FORWARD_NULL issues reported by Coverity.

Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Check link_res->hpo_dp_link_enc before using it

[WHAT & HOW]
Functions dp_enable_link_phy and dp_disable_link_phy can pass link_res
without initializing hpo_dp_link_enc and it is necessary to check for
null before dereferencing.

This fixes 2 FORWARD_NULL issues reported by Coverity.

Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add P-State Keepout to dcn401 Global Sync

[WHY&HOW]
OTG has new functionality to allow P-State relative to VStartup. Keepout region
for this should be configured based on DML outputs same as other global sync
params.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove dc dependencies from SPL library

[Why]
Make SPL library dc-independent so it can be reused by other
 components

[How]
Create separate set of fixed31_32 calls in SPL
Make all inputs and outputs to SPL use primitive types
For ratios and inits, return as uint32 from SPL.  So
 add conversion from uint32 back to fixed point in
 SPL-to-dc translate function

Reviewed-by: Relja Vojvodic <relja.vojvodic@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Issue with 3 or more mcaches per surface

[Why & How]
Current logic in mcache admissibility check has flaw if
calculated number of maches are 3 or more per surface,
so sometimes the check may pass when it should fail,
and sometimes may fail when it should pass, fix the
issue and also adding additional check to make sure that
required number of mcaches per surface cannot be
higher than number of pipes + 1, used on that surface.

Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Nevenko Stupar <nevenko.stupar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Calculate ODM width using odm slice rect, not recout

[Description]
There are scenarios where ODM4:1 is used but the
surface is entirely outside of the first and last
ODM slice. In this case the recout.width for the
first and last slice is 0 because there's no overlap
with the surface and that ODM slice, but this causes
the x_pos for the cursor in this scenario to be
calculated incorrectly. Instead we should use the
ODM slice width instead of the recout width.

Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add blanked streams override to DML2.1

[WHY]
DML2.1 currently has no concept of a "blanked" stream. For cases like DPMS off,
things like UCLK p-state is always allowed, so PMO is not required to optimize
for it.

[HOW]
Add flag to DML2.1 display configuration to indicate all streams are blanked,
so certain operations and optimizations can be skipped for optimal programming
when displays are blanked.

Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix VRR cannot enable

[Why]
Sometimes the VRR cannot enable after login to the desktop.

User space may call the DRM_IOCTL_MODE_GETCONNECTOR right after
the DRM_IOCTL_MODE_RMFB.

After calling DRM_IOCTL_MODE_RMFB to remove all the frame buffer
and it will cause the driver to disable the crtc and disable the
link while calling the link_set_dpms_off().

It will cause the dpcd read failed in amdgpu_dm_update_freesync_caps()
while try to get the DP_MSA_TIMING_PAR_IGNORED capability and think
the sink side does not support VRR.

[How]
Use the dpcd_caps.allow_invalid_MSA_timing_param flag instead of
reading from dpcd directly.

dpcd_caps.allow_invalid_MSA_timing_param flag is updated during HPD.
It is safe to replace the original method.

Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>