Edward Cree [Tue, 4 Dec 2018 17:37:57 +0000 (17:37 +0000)]
net: use skb_list_del_init() to remove from RX sublists
list_del() leaves the skb->next pointer poisoned, which can then lead to
a crash in e.g. OVS forwarding. For example, setting up an OVS VXLAN
forwarding bridge on sfc as per:
========
$ ovs-vsctl show
5dfd9c47-f04b-4aaa-aa96-
4fbb0a522a30
Bridge "br0"
Port "br0"
Interface "br0"
type: internal
Port "enp6s0f0"
Interface "enp6s0f0"
Port "vxlan0"
Interface "vxlan0"
type: vxlan
options: {key="1", local_ip="10.0.0.5", remote_ip="10.0.0.4"}
ovs_version: "2.5.0"
========
(where 10.0.0.5 is an address on enp6s0f1)
and sending traffic across it will lead to the following panic:
========
general protection fault: 0000 [#1] SMP PTI
CPU: 5 PID: 0 Comm: swapper/5 Not tainted 4.20.0-rc3-ehc+ #701
Hardware name: Dell Inc. PowerEdge R710/0M233H, BIOS 6.4.0 07/23/2013
RIP: 0010:dev_hard_start_xmit+0x38/0x200
Code: 53 48 89 fb 48 83 ec 20 48 85 ff 48 89 54 24 08 48 89 4c 24 18 0f 84 ab 01 00 00 48 8d 86 90 00 00 00 48 89 f5 48 89 44 24 10 <4c> 8b 33 48 c7 03 00 00 00 00 48 8b 05 c7 d1 b3 00 4d 85 f6 0f 95
RSP: 0018:
ffff888627b437e0 EFLAGS:
00010202
RAX:
0000000000000000 RBX:
dead000000000100 RCX:
ffff88862279c000
RDX:
ffff888614a342c0 RSI:
0000000000000000 RDI:
0000000000000000
RBP:
ffff888618a88000 R08:
0000000000000001 R09:
00000000000003e8
R10:
0000000000000000 R11:
ffff888614a34140 R12:
0000000000000000
R13:
0000000000000062 R14:
dead000000000100 R15:
ffff888616430000
FS:
0000000000000000(0000) GS:
ffff888627b40000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007f6d2bc6d000 CR3:
000000000200a000 CR4:
00000000000006e0
Call Trace:
<IRQ>
__dev_queue_xmit+0x623/0x870
? masked_flow_lookup+0xf7/0x220 [openvswitch]
? ep_poll_callback+0x101/0x310
do_execute_actions+0xaba/0xaf0 [openvswitch]
? __wake_up_common+0x8a/0x150
? __wake_up_common_lock+0x87/0xc0
? queue_userspace_packet+0x31c/0x5b0 [openvswitch]
ovs_execute_actions+0x47/0x120 [openvswitch]
ovs_dp_process_packet+0x7d/0x110 [openvswitch]
ovs_vport_receive+0x6e/0xd0 [openvswitch]
? dst_alloc+0x64/0x90
? rt_dst_alloc+0x50/0xd0
? ip_route_input_slow+0x19a/0x9a0
? __udp_enqueue_schedule_skb+0x198/0x1b0
? __udp4_lib_rcv+0x856/0xa30
? __udp4_lib_rcv+0x856/0xa30
? cpumask_next_and+0x19/0x20
? find_busiest_group+0x12d/0xcd0
netdev_frame_hook+0xce/0x150 [openvswitch]
__netif_receive_skb_core+0x205/0xae0
__netif_receive_skb_list_core+0x11e/0x220
netif_receive_skb_list+0x203/0x460
? __efx_rx_packet+0x335/0x5e0 [sfc]
efx_poll+0x182/0x320 [sfc]
net_rx_action+0x294/0x3c0
__do_softirq+0xca/0x297
irq_exit+0xa6/0xb0
do_IRQ+0x54/0xd0
common_interrupt+0xf/0xf
</IRQ>
========
So, in all listified-receive handling, instead pull skbs off the lists with
skb_list_del_init().
Fixes:
9af86f933894 ("net: core: fix use-after-free in __netif_receive_skb_list_core")
Fixes:
7da517a3bc52 ("net: core: Another step of skb receive list processing")
Fixes:
a4ca8b7df73c ("net: ipv4: fix drop handling in ip_list_rcv() and ip_list_rcv_finish()")
Fixes:
d8269e2cbf90 ("net: ipv6: listify ipv6_rcv() and ip6_rcv_finish()")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 5 Dec 2018 19:46:06 +0000 (11:46 -0800)]
Merge tag 'mac80211-for-davem-2018-12-05' of git://git./linux/kernel/git/jberg/mac80211
Johannes Berg:
====================
As it's been a while, we have various fixes for
* hwsim
* AP mode (client powersave related)
* CSA/FTM interaction
* a busy loop in IE handling
* and similar
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jouni Malinen [Wed, 5 Dec 2018 10:55:54 +0000 (12:55 +0200)]
cfg80211: Fix busy loop regression in ieee80211_ie_split_ric()
This function was modified to support the information element extension
case (WLAN_EID_EXTENSION) in a manner that would result in an infinite
loop when going through set of IEs that include WLAN_EID_RIC_DATA and
contain an IE that is in the after_ric array. The only place where this
can currently happen is in mac80211 ieee80211_send_assoc() where
ieee80211_ie_split_ric() is called with after_ric[].
This can be triggered by valid data from user space nl80211
association/connect request (i.e., requiring GENL_UNS_ADMIN_PERM). The
only known application having an option to include WLAN_EID_RIC_DATA in
these requests is wpa_supplicant and it had a bug that prevented this
specific contents from being used (and because of that, not triggering
this kernel bug in an automated test case ap_ft_ric) and now that this
bug is fixed, it has a workaround to avoid this kernel issue.
WLAN_EID_RIC_DATA is currently used only for testing purposes, so this
does not cause significant harm for production use cases.
Fixes:
2512b1b18d07 ("mac80211: extend ieee80211_ie_split to support EXTENSION")
Cc: stable@vger.kernel.org
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Emmanuel Grumbach [Mon, 3 Dec 2018 19:16:07 +0000 (21:16 +0200)]
mac80211: ignore NullFunc frames in the duplicate detection
NullFunc packets should never be duplicate just like
QoS-NullFunc packets.
We saw a client that enters / exits power save with
NullFunc frames (and not with QoS-NullFunc) despite the
fact that the association supports HT.
This specific client also re-uses a non-zero sequence number
for different NullFunc frames.
At some point, the client had to send a retransmission of
the NullFunc frame and we dropped it, leading to a
misalignment in the power save state.
Fix this by never consider a NullFunc frame as duplicate,
just like we do for QoS NullFunc frames.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=201449
CC: <stable@vger.kernel.org>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Felix Fietkau [Wed, 28 Nov 2018 21:39:16 +0000 (22:39 +0100)]
mac80211: fix reordering of buffered broadcast packets
If the buffered broadcast queue contains packets, letting new packets bypass
that queue can lead to heavy reordering, since the driver is probably throttling
transmission of buffered multicast packets after beacons.
Keep buffering packets until the buffer has been cleared (and no client
is in powersave mode).
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Felix Fietkau [Tue, 13 Nov 2018 19:32:13 +0000 (20:32 +0100)]
mac80211: ignore tx status for PS stations in ieee80211_tx_status_ext
Make it behave like regular ieee80211_tx_status calls, except for the lack of
filtered frame processing.
This fixes spurious low-ack triggered disconnections with powersave clients
connected to an AP.
Fixes:
f027c2aca0cf4 ("mac80211: add ieee80211_tx_status_noskb")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Baruch Siach [Tue, 4 Dec 2018 14:03:53 +0000 (16:03 +0200)]
net: mvpp2: fix phylink handling of invalid PHY modes
The .validate phylink callback should empty the supported bitmap when
the interface mode is invalid.
Cc: Maxime Chevallier <maxime.chevallier@bootlin.com>
Cc: Antoine Tenart <antoine.tenart@bootlin.com>
Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
Baruch Siach [Tue, 4 Dec 2018 14:03:52 +0000 (16:03 +0200)]
net: mvpp2: fix detection of 10G SFP modules
The mvpp2_phylink_validate() relies on the interface field of
phylink_link_state to determine valid link modes. However, when called
from phylink_sfp_module_insert() this field in not initialized. The
default switch case then excludes 10G link modes. This allows 10G SFP
modules that are detected correctly to be configured at max rate of
2.5G.
Catch the uninitialized PHY mode case, and allow 10G rates.
Fixes:
d97c9f4ab000b ("net: mvpp2: 1000baseX support")
Cc: Maxime Chevallier <maxime.chevallier@bootlin.com>
Cc: Antoine Tenart <antoine.tenart@bootlin.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Saenz Julienne [Mon, 3 Dec 2018 12:21:01 +0000 (13:21 +0100)]
ethernet: fman: fix wrong of_node_put() in probe function
After getting a reference to the platform device's of_node the probe
function ends up calling of_find_matching_node() using the node as an
argument. The function takes care of decreasing the refcount on it. We
are then incorrectly decreasing the refcount on that node again.
This patch removes the unwarranted call to of_node_put().
Fixes:
414fd46e7762 ("fsl/fman: Add FMan support")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 4 Dec 2018 17:40:35 +0000 (09:40 -0800)]
rtnetlink: ndo_dflt_fdb_dump() only work for ARPHRD_ETHER devices
kmsan was able to trigger a kernel-infoleak using a gre device [1]
nlmsg_populate_fdb_fill() has a hard coded assumption
that dev->addr_len is ETH_ALEN, as normally guaranteed
for ARPHRD_ETHER devices.
A similar issue was fixed recently in commit
da71577545a5
("rtnetlink: Disallow FDB configuration for non-Ethernet device")
[1]
BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:143 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x4c0/0x2700 lib/iov_iter.c:576
CPU: 0 PID: 6697 Comm: syz-executor310 Not tainted 4.20.0-rc3+ #95
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x32d/0x480 lib/dump_stack.c:113
kmsan_report+0x12c/0x290 mm/kmsan/kmsan.c:683
kmsan_internal_check_memory+0x32a/0xa50 mm/kmsan/kmsan.c:743
kmsan_copy_to_user+0x78/0xd0 mm/kmsan/kmsan_hooks.c:634
copyout lib/iov_iter.c:143 [inline]
_copy_to_iter+0x4c0/0x2700 lib/iov_iter.c:576
copy_to_iter include/linux/uio.h:143 [inline]
skb_copy_datagram_iter+0x4e2/0x1070 net/core/datagram.c:431
skb_copy_datagram_msg include/linux/skbuff.h:3316 [inline]
netlink_recvmsg+0x6f9/0x19d0 net/netlink/af_netlink.c:1975
sock_recvmsg_nosec net/socket.c:794 [inline]
sock_recvmsg+0x1d1/0x230 net/socket.c:801
___sys_recvmsg+0x444/0xae0 net/socket.c:2278
__sys_recvmsg net/socket.c:2327 [inline]
__do_sys_recvmsg net/socket.c:2337 [inline]
__se_sys_recvmsg+0x2fa/0x450 net/socket.c:2334
__x64_sys_recvmsg+0x4a/0x70 net/socket.c:2334
do_syscall_64+0xcf/0x110 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x441119
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db 0a fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:
00007fffc7f008a8 EFLAGS:
00000207 ORIG_RAX:
000000000000002f
RAX:
ffffffffffffffda RBX:
00000000004002c8 RCX:
0000000000441119
RDX:
0000000000000040 RSI:
00000000200005c0 RDI:
0000000000000003
RBP:
00000000006cc018 R08:
0000000000000100 R09:
0000000000000100
R10:
0000000000000100 R11:
0000000000000207 R12:
0000000000402080
R13:
0000000000402110 R14:
0000000000000000 R15:
0000000000000000
Uninit was stored to memory at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:246 [inline]
kmsan_save_stack mm/kmsan/kmsan.c:261 [inline]
kmsan_internal_chain_origin+0x13d/0x240 mm/kmsan/kmsan.c:469
kmsan_memcpy_memmove_metadata+0x1a9/0xf70 mm/kmsan/kmsan.c:344
kmsan_memcpy_metadata+0xb/0x10 mm/kmsan/kmsan.c:362
__msan_memcpy+0x61/0x70 mm/kmsan/kmsan_instr.c:162
__nla_put lib/nlattr.c:744 [inline]
nla_put+0x20a/0x2d0 lib/nlattr.c:802
nlmsg_populate_fdb_fill+0x444/0x810 net/core/rtnetlink.c:3466
nlmsg_populate_fdb net/core/rtnetlink.c:3775 [inline]
ndo_dflt_fdb_dump+0x73a/0x960 net/core/rtnetlink.c:3807
rtnl_fdb_dump+0x1318/0x1cb0 net/core/rtnetlink.c:3979
netlink_dump+0xc79/0x1c90 net/netlink/af_netlink.c:2244
__netlink_dump_start+0x10c4/0x11d0 net/netlink/af_netlink.c:2352
netlink_dump_start include/linux/netlink.h:216 [inline]
rtnetlink_rcv_msg+0x141b/0x1540 net/core/rtnetlink.c:4910
netlink_rcv_skb+0x394/0x640 net/netlink/af_netlink.c:2477
rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4965
netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
netlink_unicast+0x1699/0x1740 net/netlink/af_netlink.c:1336
netlink_sendmsg+0x13c7/0x1440 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg net/socket.c:631 [inline]
___sys_sendmsg+0xe3b/0x1240 net/socket.c:2116
__sys_sendmsg net/socket.c:2154 [inline]
__do_sys_sendmsg net/socket.c:2163 [inline]
__se_sys_sendmsg+0x305/0x460 net/socket.c:2161
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161
do_syscall_64+0xcf/0x110 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:246 [inline]
kmsan_internal_poison_shadow+0x6d/0x130 mm/kmsan/kmsan.c:170
kmsan_kmalloc+0xa1/0x100 mm/kmsan/kmsan_hooks.c:186
__kmalloc+0x14c/0x4d0 mm/slub.c:3825
kmalloc include/linux/slab.h:551 [inline]
__hw_addr_create_ex net/core/dev_addr_lists.c:34 [inline]
__hw_addr_add_ex net/core/dev_addr_lists.c:80 [inline]
__dev_mc_add+0x357/0x8a0 net/core/dev_addr_lists.c:670
dev_mc_add+0x6d/0x80 net/core/dev_addr_lists.c:687
ip_mc_filter_add net/ipv4/igmp.c:1128 [inline]
igmp_group_added+0x4d4/0xb80 net/ipv4/igmp.c:1311
__ip_mc_inc_group+0xea9/0xf70 net/ipv4/igmp.c:1444
ip_mc_inc_group net/ipv4/igmp.c:1453 [inline]
ip_mc_up+0x1c3/0x400 net/ipv4/igmp.c:1775
inetdev_event+0x1d03/0x1d80 net/ipv4/devinet.c:1522
notifier_call_chain kernel/notifier.c:93 [inline]
__raw_notifier_call_chain kernel/notifier.c:394 [inline]
raw_notifier_call_chain+0x13d/0x240 kernel/notifier.c:401
__dev_notify_flags+0x3da/0x860 net/core/dev.c:1733
dev_change_flags+0x1ac/0x230 net/core/dev.c:7569
do_setlink+0x165f/0x5ea0 net/core/rtnetlink.c:2492
rtnl_newlink+0x2ad7/0x35a0 net/core/rtnetlink.c:3111
rtnetlink_rcv_msg+0x1148/0x1540 net/core/rtnetlink.c:4947
netlink_rcv_skb+0x394/0x640 net/netlink/af_netlink.c:2477
rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4965
netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
netlink_unicast+0x1699/0x1740 net/netlink/af_netlink.c:1336
netlink_sendmsg+0x13c7/0x1440 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg net/socket.c:631 [inline]
___sys_sendmsg+0xe3b/0x1240 net/socket.c:2116
__sys_sendmsg net/socket.c:2154 [inline]
__do_sys_sendmsg net/socket.c:2163 [inline]
__se_sys_sendmsg+0x305/0x460 net/socket.c:2161
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161
do_syscall_64+0xcf/0x110 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
Bytes 36-37 of 105 are uninitialized
Memory access of size 105 starts at
ffff88819686c000
Data copied to user address
0000000020000380
Fixes:
d83b06036048 ("net: add fdb generic dump routine")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Ido Schimmel <idosch@mellanox.com>
Cc: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 4 Dec 2018 16:47:44 +0000 (08:47 -0800)]
phy: Revert toggling reset changes.
This reverts:
ef1b5bf506b1 ("net: phy: Fix not to call phy_resume() if PHY is not attached")
8c85f4b81296 ("net: phy: micrel: add toggling phy reset if PHY is not attached")
Andrew Lunn informs me that there are alternative efforts
underway to fix this more properly.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 4 Dec 2018 00:16:23 +0000 (16:16 -0800)]
Merge branch 'mlx4-fixes'
Tariq Toukan says:
====================
mlx4 fixes for 4.20-rc
This patchset includes small fixes for the mlx4_en driver.
First patch by Eran fixes the value used to init the netdevice's
min_mtu field.
Please queue it to -stable >= v4.10.
Second patch by Saeed adds missing Kconfig build dependencies.
Series generated against net commit:
35b827b6d061 tun: forbid iface creation with rtnl ops
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Saeed Mahameed [Sun, 2 Dec 2018 12:34:37 +0000 (14:34 +0200)]
net/mlx4_en: Fix build break when CONFIG_INET is off
MLX4_EN depends on NETDEVICES, ETHERNET and INET Kconfigs.
Make sure they are listed in MLX4_EN Kconfig dependencies.
This fixes the following build break:
drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: ‘struct iphdr’ declared inside parameter list [enabled by default]
struct iphdr *iph)
^
drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
drivers/net/ethernet/mellanox/mlx4/en_rx.c: In function ‘get_fixed_ipv4_csum’:
drivers/net/ethernet/mellanox/mlx4/en_rx.c:586:20: error: dereferencing pointer to incomplete type
_u8 ipproto = iph->protocol;
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eran Ben Elisha [Sun, 2 Dec 2018 12:34:36 +0000 (14:34 +0200)]
net/mlx4_en: Change min MTU size to ETH_MIN_MTU
NIC driver minimal MTU size shall be set to ETH_MIN_MTU, as defined in
the RFC791 and in the network stack. Remove old mlx4_en only define for
it, which was set to wrong value.
Fixes:
b80f71f5816f ("ethernet/mellanox: use core min/max MTU checking")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Qian Cai [Sun, 2 Dec 2018 02:11:19 +0000 (21:11 -0500)]
net/core: tidy up an error message
netif_napi_add() could report an error like this below due to it allows
to pass a format string for wildcarding before calling
dev_get_valid_name(),
"netif_napi_add() called with weight 256 on device eth%d"
For example, hns_enet_drv module does this.
hns_nic_try_get_ae
hns_nic_init_ring_data
netif_napi_add
register_netdev
dev_get_valid_name
Hence, make it a bit more human-readable by using netdev_err_once()
instead.
Signed-off-by: Qian Cai <cai@gmx.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Anderson Luiz Alves [Fri, 30 Nov 2018 23:58:36 +0000 (21:58 -0200)]
mv88e6060: disable hardware level MAC learning
Disable hardware level MAC learning because it breaks station roaming.
When enabled it drops all frames that arrive from a MAC address
that is on a different port at learning table.
Signed-off-by: Anderson Luiz Alves <alacn1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matteo Croce [Fri, 30 Nov 2018 23:26:27 +0000 (00:26 +0100)]
macvlan: return correct error value
A MAC address must be unique among all the macvlan devices with the same
lower device. The only exception is the passthru [sic] mode,
which shares the lower device address.
When duplicate addresses are detected, EBUSY is returned when bringing
the interface up:
# ip link add macvlan0 link eth0 type macvlan
# read addr </sys/class/net/eth0/address
# ip link set macvlan0 address $addr
# ip link set macvlan0 up
RTNETLINK answers: Device or resource busy
Use correct error code which is EADDRINUSE, and do the check also
earlier, on address change:
# ip link set macvlan0 address $addr
RTNETLINK answers: Address already in use
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Fri, 30 Nov 2018 17:36:59 +0000 (01:36 +0800)]
sctp: kfree_rcu asoc
In sctp_hash_transport/sctp_epaddr_lookup_transport, it dereferences
a transport's asoc under rcu_read_lock while asoc is freed not after
a grace period, which leads to a use-after-free panic.
This patch fixes it by calling kfree_rcu to make asoc be freed after
a grace period.
Note that only the asoc's memory is delayed to free in the patch, it
won't cause sk to linger longer.
Thanks Neil and Marcelo to make this clear.
Fixes:
7fda702f9315 ("sctp: use new rhlist interface on sctp transport rhashtable")
Fixes:
cd2b70875058 ("sctp: check duplicate node before inserting a new transport")
Reported-by: syzbot+0b05d8aa7cb185107483@syzkaller.appspotmail.com
Reported-by: syzbot+aad231d51b1923158444@syzkaller.appspotmail.com
Suggested-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Fri, 30 Nov 2018 16:59:08 +0000 (10:59 -0600)]
net/ibmvnic: Fix RTNL deadlock during device reset
Commit
a5681e20b541 ("net/ibmnvic: Fix deadlock problem
in reset") made the change to hold the RTNL lock during
driver reset but still calls netdev_notify_peers, which
results in a deadlock. Instead, use call_netdevice_notifiers,
which is functionally the same except that it does not
take the RTNL lock again.
Fixes:
a5681e20b541 ("net/ibmnvic: Fix deadlock problem in reset")
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jean-Philippe Brucker [Fri, 30 Nov 2018 16:05:53 +0000 (16:05 +0000)]
vhost: fix IOTLB locking
Commit
78139c94dc8c ("net: vhost: lock the vqs one by one") moved the vq
lock to improve scalability, but introduced a possible deadlock in
vhost-iotlb. vhost_iotlb_notify_vq() now takes vq->mutex while holding
the device's IOTLB spinlock. And on the vhost_iotlb_miss() path, the
spinlock is taken while holding vq->mutex.
Since calling vhost_poll_queue() doesn't require any lock, avoid the
deadlock by not taking vq->mutex.
Fixes:
78139c94dc8c ("net: vhost: lock the vqs one by one")
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 3 Dec 2018 23:20:19 +0000 (15:20 -0800)]
Merge branch 'phy-micrel-toggling-reset'
Yoshihiro Shimoda says:
====================
net: phy: micrel: add toggling phy reset
This patch set is for R-Car Gen3 Salvator-XS boards. If we do
the following method, the phy cannot link up correctly.
1) Kernel boots by using initramfs.
--> No open the nic, so phy_device_register() and phy_probe()
deasserts the reset.
2) Kernel enters the suspend.
--> So, keep the reset signal as deassert.
--> On R-Car Salvator-XS board, unfortunately, the board power is
turned off.
3) Kernel returns from suspend.
4) ifconfig eth0 up
--> Then, since edge signal of the reset doesn't happen,
it cannot link up.
5) ifconfig eth0 down
6) ifconfig eth0 up
--> In this case, it can link up.
When resolving this issue after I got feedback from Andrew and Heiner,
I found an issue that the phy_device.c didn't call phy_resume()
if the PHY was not attached. So, patch 1 fixes it and add toggling
the phy reset to the micrel phy driver.
Changes from v1 (as RFC):
- No remove the current code of phy_device.c to avoid any side effects.
- Fix the mdio_bus_phy_resume() in phy_device.c.
- Add toggling the phy reset in micrel.c if the PHY is not attached.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yoshihiro Shimoda [Wed, 28 Nov 2018 09:02:42 +0000 (09:02 +0000)]
net: phy: micrel: add toggling phy reset if PHY is not attached
This patch adds toggling phy reset if PHY is not attached. Otherwise,
some boards (e.g. R-Car H3 Salvator-XS) cannot link up correctly if
we do the following method:
1) Kernel boots by using initramfs.
--> No open the nic, so phy_device_register() and phy_probe()
deasserts the reset.
2) Kernel enters the suspend.
--> So, keep the reset signal as deassert.
--> On R-Car Salvator-XS board, unfortunately, the board power is
turned off.
3) Kernel returns from suspend.
4) ifconfig eth0 up
--> Then, since edge signal of the reset doesn't happen,
it cannot link up.
5) ifconfig eth0 down
6) ifconfig eth0 up
--> In this case, it can link up.
Reported-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yoshihiro Shimoda [Wed, 28 Nov 2018 09:02:41 +0000 (09:02 +0000)]
net: phy: Fix not to call phy_resume() if PHY is not attached
This patch fixes an issue that mdio_bus_phy_resume() doesn't call
phy_resume() if the PHY is not attached.
Fixes:
803dd9c77ac3 ("net: phy: avoid suspending twice a PHY")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prashant Bhole [Mon, 3 Dec 2018 09:09:24 +0000 (18:09 +0900)]
tun: remove skb access after netif_receive_skb
In tun.c skb->len was accessed while doing stats accounting after a
call to netif_receive_skb. We can not access skb after this call
because buffers may be dropped.
The fix for this bug would be to store skb->len in local variable and
then use it after netif_receive_skb(). IMO using xdp data size for
accounting bytes will be better because input for tun_xdp_one() is
xdp_buff.
Hence this patch:
- fixes a bug by removing skb access after netif_receive_skb()
- uses xdp data size for accounting bytes
[613.019057] BUG: KASAN: use-after-free in tun_sendmsg+0x77c/0xc50 [tun]
[613.021062] Read of size 4 at addr
ffff8881da9ab7c0 by task vhost-1115/1155
[613.023073]
[613.024003] CPU: 0 PID: 1155 Comm: vhost-1115 Not tainted 4.20.0-rc3-vm+ #232
[613.026029] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[613.029116] Call Trace:
[613.031145] dump_stack+0x5b/0x90
[613.032219] print_address_description+0x6c/0x23c
[613.034156] ? tun_sendmsg+0x77c/0xc50 [tun]
[613.036141] kasan_report.cold.5+0x241/0x308
[613.038125] tun_sendmsg+0x77c/0xc50 [tun]
[613.040109] ? tun_get_user+0x1960/0x1960 [tun]
[613.042094] ? __isolate_free_page+0x270/0x270
[613.045173] vhost_tx_batch.isra.14+0xeb/0x1f0 [vhost_net]
[613.047127] ? peek_head_len.part.13+0x90/0x90 [vhost_net]
[613.049096] ? get_tx_bufs+0x5a/0x2c0 [vhost_net]
[613.051106] ? vhost_enable_notify+0x2d8/0x420 [vhost]
[613.053139] handle_tx_copy+0x2d0/0x8f0 [vhost_net]
[613.053139] ? vhost_net_buf_peek+0x340/0x340 [vhost_net]
[613.053139] ? __mutex_lock+0x8d9/0xb30
[613.053139] ? finish_task_switch+0x8f/0x3f0
[613.053139] ? handle_tx+0x32/0x120 [vhost_net]
[613.053139] ? mutex_trylock+0x110/0x110
[613.053139] ? finish_task_switch+0xcf/0x3f0
[613.053139] ? finish_task_switch+0x240/0x3f0
[613.053139] ? __switch_to_asm+0x34/0x70
[613.053139] ? __switch_to_asm+0x40/0x70
[613.053139] ? __schedule+0x506/0xf10
[613.053139] handle_tx+0xc7/0x120 [vhost_net]
[613.053139] vhost_worker+0x166/0x200 [vhost]
[613.053139] ? vhost_dev_init+0x580/0x580 [vhost]
[613.053139] ? __kthread_parkme+0x77/0x90
[613.053139] ? vhost_dev_init+0x580/0x580 [vhost]
[613.053139] kthread+0x1b1/0x1d0
[613.053139] ? kthread_park+0xb0/0xb0
[613.053139] ret_from_fork+0x35/0x40
[613.088705]
[613.088705] Allocated by task 1155:
[613.088705] kasan_kmalloc+0xbf/0xe0
[613.088705] kmem_cache_alloc+0xdc/0x220
[613.088705] __build_skb+0x2a/0x160
[613.088705] build_skb+0x14/0xc0
[613.088705] tun_sendmsg+0x4f0/0xc50 [tun]
[613.088705] vhost_tx_batch.isra.14+0xeb/0x1f0 [vhost_net]
[613.088705] handle_tx_copy+0x2d0/0x8f0 [vhost_net]
[613.088705] handle_tx+0xc7/0x120 [vhost_net]
[613.088705] vhost_worker+0x166/0x200 [vhost]
[613.088705] kthread+0x1b1/0x1d0
[613.088705] ret_from_fork+0x35/0x40
[613.088705]
[613.088705] Freed by task 1155:
[613.088705] __kasan_slab_free+0x12e/0x180
[613.088705] kmem_cache_free+0xa0/0x230
[613.088705] ip6_mc_input+0x40f/0x5a0
[613.088705] ipv6_rcv+0xc9/0x1e0
[613.088705] __netif_receive_skb_one_core+0xc1/0x100
[613.088705] netif_receive_skb_internal+0xc4/0x270
[613.088705] br_pass_frame_up+0x2b9/0x2e0
[613.088705] br_handle_frame_finish+0x2fb/0x7a0
[613.088705] br_handle_frame+0x30f/0x6c0
[613.088705] __netif_receive_skb_core+0x61a/0x15b0
[613.088705] __netif_receive_skb_one_core+0x8e/0x100
[613.088705] netif_receive_skb_internal+0xc4/0x270
[613.088705] tun_sendmsg+0x738/0xc50 [tun]
[613.088705] vhost_tx_batch.isra.14+0xeb/0x1f0 [vhost_net]
[613.088705] handle_tx_copy+0x2d0/0x8f0 [vhost_net]
[613.088705] handle_tx+0xc7/0x120 [vhost_net]
[613.088705] vhost_worker+0x166/0x200 [vhost]
[613.088705] kthread+0x1b1/0x1d0
[613.088705] ret_from_fork+0x35/0x40
[613.088705]
[613.088705] The buggy address belongs to the object at
ffff8881da9ab740
[613.088705] which belongs to the cache skbuff_head_cache of size 232
Fixes:
043d222f93ab ("tuntap: accept an array of XDP buffs through sendmsg()")
Reviewed-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Su Yanjun [Mon, 3 Dec 2018 07:33:07 +0000 (15:33 +0800)]
net: 8139cp: fix a BUG triggered by changing mtu with network traffic
When changing mtu many times with traffic, a bug is triggered:
[ 1035.684037] kernel BUG at lib/dynamic_queue_limits.c:26!
[ 1035.684042] invalid opcode: 0000 [#1] SMP
[ 1035.684049] Modules linked in: loop binfmt_misc 8139cp(OE) macsec
tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag tcp_lp
fuse uinput xt_CHECKSUM iptable_mangle ipt_MASQUERADE
nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4
nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun
bridge stp llc ebtable_filter ebtables ip6table_filter devlink
ip6_tables iptable_filter sunrpc snd_hda_codec_generic snd_hda_intel
snd_hda_codec snd_hda_core snd_hwdep ppdev snd_seq iosf_mbi crc32_pclmul
parport_pc snd_seq_device ghash_clmulni_intel parport snd_pcm
aesni_intel joydev lrw snd_timer virtio_balloon sg gf128mul glue_helper
ablk_helper cryptd snd soundcore i2c_piix4 pcspkr ip_tables xfs
libcrc32c sr_mod sd_mod cdrom crc_t10dif crct10dif_generic ata_generic
[ 1035.684102] pata_acpi virtio_console qxl drm_kms_helper syscopyarea
sysfillrect sysimgblt floppy fb_sys_fops crct10dif_pclmul
crct10dif_common ttm crc32c_intel serio_raw ata_piix drm libata 8139too
virtio_pci drm_panel_orientation_quirks virtio_ring virtio mii dm_mirror
dm_region_hash dm_log dm_mod [last unloaded: 8139cp]
[ 1035.684132] CPU: 9 PID: 25140 Comm: if-mtu-change Kdump: loaded
Tainted: G OE ------------ T 3.10.0-957.el7.x86_64 #1
[ 1035.684134] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[ 1035.684136] task:
ffff8f59b1f5a080 ti:
ffff8f5a2e32c000 task.ti:
ffff8f5a2e32c000
[ 1035.684149] RIP: 0010:[<
ffffffffba3a40d0>] [<
ffffffffba3a40d0>]
dql_completed+0x180/0x190
[ 1035.684162] RSP: 0000:
ffff8f5a75483e50 EFLAGS:
00010093
[ 1035.684162] RAX:
00000000000000c2 RBX:
ffff8f5a6f91c000 RCX:
0000000000000000
[ 1035.684162] RDX:
0000000000000000 RSI:
0000000000000184 RDI:
ffff8f599fea3ec0
[ 1035.684162] RBP:
ffff8f5a75483ea8 R08:
00000000000000c2 R09:
0000000000000000
[ 1035.684162] R10:
00000000000616ef R11:
ffff8f5a75483b56 R12:
ffff8f599fea3e00
[ 1035.684162] R13:
0000000000000001 R14:
0000000000000000 R15:
0000000000000184
[ 1035.684162] FS:
00007fa8434de740(0000) GS:
ffff8f5a75480000(0000)
knlGS:
0000000000000000
[ 1035.684162] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 1035.684162] CR2:
00000000004305d0 CR3:
000000024eb66000 CR4:
00000000001406e0
[ 1035.684162] Call Trace:
[ 1035.684162] <IRQ>
[ 1035.684162] [<
ffffffffc08cbaf8>] ? cp_interrupt+0x478/0x580 [8139cp]
[ 1035.684162] [<
ffffffffba14a294>]
__handle_irq_event_percpu+0x44/0x1c0
[ 1035.684162] [<
ffffffffba14a442>] handle_irq_event_percpu+0x32/0x80
[ 1035.684162] [<
ffffffffba14a4cc>] handle_irq_event+0x3c/0x60
[ 1035.684162] [<
ffffffffba14db29>] handle_fasteoi_irq+0x59/0x110
[ 1035.684162] [<
ffffffffba02e554>] handle_irq+0xe4/0x1a0
[ 1035.684162] [<
ffffffffba7795dd>] do_IRQ+0x4d/0xf0
[ 1035.684162] [<
ffffffffba76b362>] common_interrupt+0x162/0x162
[ 1035.684162] <EOI>
[ 1035.684162] [<
ffffffffba0c2ae4>] ? __wake_up_bit+0x24/0x70
[ 1035.684162] [<
ffffffffba1e46f5>] ? do_set_pte+0xd5/0x120
[ 1035.684162] [<
ffffffffba1b64fb>] unlock_page+0x2b/0x30
[ 1035.684162] [<
ffffffffba1e4879>] do_read_fault.isra.61+0x139/0x1b0
[ 1035.684162] [<
ffffffffba1e9134>] handle_pte_fault+0x2f4/0xd10
[ 1035.684162] [<
ffffffffba1ebc6d>] handle_mm_fault+0x39d/0x9b0
[ 1035.684162] [<
ffffffffba76f5e3>] __do_page_fault+0x203/0x500
[ 1035.684162] [<
ffffffffba76f9c6>] trace_do_page_fault+0x56/0x150
[ 1035.684162] [<
ffffffffba76ef42>] do_async_page_fault+0x22/0xf0
[ 1035.684162] [<
ffffffffba76b788>] async_page_fault+0x28/0x30
[ 1035.684162] Code: 54 c7 47 54 ff ff ff ff 44 0f 49 ce 48 8b 35 48 2f
9c 00 48 89 77 58 e9 fe fe ff ff 0f 1f 80 00 00 00 00 41 89 d1 e9 ef fe
ff ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 55 8d 42 ff 48
[ 1035.684162] RIP [<
ffffffffba3a40d0>] dql_completed+0x180/0x190
[ 1035.684162] RSP <
ffff8f5a75483e50>
It's not the same as in
7fe0ee09 patch described.
As 8139cp uses shared irq mode, other device irq will trigger
cp_interrupt to execute.
cp_change_mtu
-> cp_close
-> cp_open
In cp_close routine just before free_irq(), some interrupt may occur.
In my environment, cp_interrupt exectutes and IntrStatus is 0x4,
exactly TxOk. That will cause cp_tx to wake device queue.
As device queue is started, cp_start_xmit and cp_open will run at same
time which will cause kernel BUG.
For example:
[#] for tx descriptor
At start:
[#][#][#]
num_queued=3
After cp_init_hw->cp_start_hw->netdev_reset_queue:
[#][#][#]
num_queued=0
When 8139cp starts to work then cp_tx will check
num_queued mismatchs the complete_bytes.
The patch will check IntrMask before check IntrStatus in cp_interrupt.
When 8139cp interrupt is disabled, just return.
Signed-off-by: Su Yanjun <suyj.fnst@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Mon, 3 Dec 2018 07:19:33 +0000 (08:19 +0100)]
net: phy: don't allow __set_phy_supported to add unsupported modes
Currently __set_phy_supported allows to add modes w/o checking whether
the PHY supports them. This is wrong, it should never add modes but
only remove modes we don't want to support.
The commit marked as fixed didn't do anything wrong, it just copied
existing functionality to the helper which is being fixed now.
Fixes:
f3a6bd393c2c ("phylib: Add phy_set_max_speed helper")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Thu, 29 Nov 2018 13:45:39 +0000 (14:45 +0100)]
tun: forbid iface creation with rtnl ops
It's not supported right now (the goal of the initial patch was to support
'ip link del' only).
Before the patch:
$ ip link add foo type tun
[ 239.632660] BUG: unable to handle kernel NULL pointer dereference at
0000000000000000
[snip]
[ 239.636410] RIP: 0010:register_netdevice+0x8e/0x3a0
This panic occurs because dev->netdev_ops is not set by tun_setup(). But to
have something usable, it will require more than just setting
netdev_ops.
Fixes:
f019a7a594d9 ("tun: Implement ip link del tunXXX")
CC: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Thu, 29 Nov 2018 05:53:16 +0000 (13:53 +0800)]
virtio-net: keep vnet header zeroed after processing XDP
We copy vnet header unconditionally in page_to_skb() this is wrong
since XDP may modify the packet data. So let's keep a zeroed vnet
header for not confusing the conversion between vnet header and skb
metadata.
In the future, we should able to detect whether or not the packet was
modified and keep using the vnet header when packet was not touched.
Fixes:
f600b6905015 ("virtio_net: Add XDP support")
Reported-by: Pavel Popa <pashinho1990@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 1 Dec 2018 01:22:42 +0000 (17:22 -0800)]
Merge branch 'tcp-fixes-in-timeout-and-retransmission-accounting'
Yuchung Cheng says:
====================
tcp: fixes in timeout and retransmission accounting
This patch set has assorted fixes of minor accounting issues in
timeout, window probe, and retransmission stats.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuchung Cheng [Thu, 29 Nov 2018 00:06:45 +0000 (16:06 -0800)]
tcp: fix SNMP TCP timeout under-estimation
Previously the SNMP TCPTIMEOUTS counter has inconsistent accounting:
1. It counts all SYN and SYN-ACK timeouts
2. It counts timeouts in other states except recurring timeouts and
timeouts after fast recovery or disorder state.
Such selective accounting makes analysis difficult and complicated. For
example the monitoring system needs to collect many other SNMP counters
to infer the total amount of timeout events. This patch makes TCPTIMEOUTS
counter simply counts all the retransmit timeout (SYN or data or FIN).
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuchung Cheng [Thu, 29 Nov 2018 00:06:44 +0000 (16:06 -0800)]
tcp: fix SNMP under-estimation on failed retransmission
Previously the SNMP counter LINUX_MIB_TCPRETRANSFAIL is not counting
the TSO/GSO properly on failed retransmission. This patch fixes that.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuchung Cheng [Thu, 29 Nov 2018 00:06:43 +0000 (16:06 -0800)]
tcp: fix off-by-one bug on aborting window-probing socket
Previously there is an off-by-one bug on determining when to abort
a stalled window-probing socket. This patch fixes that so it is
consistent with tcp_write_timeout().
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pan Bian [Wed, 28 Nov 2018 23:54:22 +0000 (07:54 +0800)]
liquidio: read sc->iq_no before release sc
The function lio_vf_rep_packet_sent_callback releases the occupation of
sc via octeon_free_soft_command. sc should not be used after that.
Unfortunately, sc->iq_no is read. To fix this, the patch stores sc->iq_no
into a local variable before releasing sc and then uses the local variable
instead of sc->iq_no.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Wed, 28 Nov 2018 23:04:05 +0000 (15:04 -0800)]
mlx5: fix get_ip_proto()
IP header is not necessarily located right after struct ethhdr,
there could be multiple 802.1Q headers in between, this is why
we call __vlan_get_protocol().
Fixes:
fe1dc069990c ("net/mlx5e: don't set CHECKSUM_COMPLETE on SCTP packets")
Cc: Alaa Hleihel <alaa@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 28 Nov 2018 21:40:04 +0000 (13:40 -0800)]
net: dsa: Fix tagging attribute location
While introducing the DSA tagging protocol attribute, it was added to the DSA
slave network devices, but those actually see untagged traffic (that is their
whole purpose). Correct this mistake by putting the tagging sysfs attribute
under the DSA master network device where this is the information that we need.
While at it, also correct the sysfs documentation mistake that missed the
"dsa/" directory component of the attribute.
Fixes:
98cdb4807123 ("net: dsa: Expose tagging protocol to user-space")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Davide Caratti [Wed, 28 Nov 2018 17:43:42 +0000 (18:43 +0100)]
net/sched: act_police: fix memory leak in case of invalid control action
when users set an invalid control action, kmemleak complains as follows:
# echo clear >/sys/kernel/debug/kmemleak
# ./tdc.py -e b48b
Test b48b: Add police action with exceed goto chain control action
All test results:
1..1
ok 1 - b48b # Add police action with exceed goto chain control action
about to flush the tap output if tests need to be skipped
done flushing skipped test tap output
# echo scan >/sys/kernel/debug/kmemleak
# cat /sys/kernel/debug/kmemleak
unreferenced object 0xffffa0fafbc3dde0 (size 96):
comm "tc", pid 2358, jiffies
4294922738 (age 17.022s)
hex dump (first 32 bytes):
2a 00 00 20 00 00 00 00 00 00 7d 00 00 00 00 00 *.. ......}.....
f8 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
00000000648803d2>] tcf_action_init_1+0x384/0x4c0
[<
00000000cb69382e>] tcf_action_init+0x12b/0x1a0
[<
00000000847ef0d4>] tcf_action_add+0x73/0x170
[<
0000000093656e14>] tc_ctl_action+0x122/0x160
[<
0000000023c98e32>] rtnetlink_rcv_msg+0x263/0x2d0
[<
000000003493ae9c>] netlink_rcv_skb+0x4d/0x130
[<
00000000de63f8ba>] netlink_unicast+0x209/0x2d0
[<
00000000c3da0ebe>] netlink_sendmsg+0x2c1/0x3c0
[<
000000007a9e0753>] sock_sendmsg+0x33/0x40
[<
00000000457c6d2e>] ___sys_sendmsg+0x2a0/0x2f0
[<
00000000c5c6a086>] __sys_sendmsg+0x5e/0xa0
[<
00000000446eafce>] do_syscall_64+0x5b/0x180
[<
000000004aa871f2>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[<
00000000450c38ef>] 0xffffffffffffffff
change tcf_police_init() to avoid leaking 'new' in case TCA_POLICE_RESULT
contains TC_ACT_GOTO_CHAIN extended action.
Fixes:
c08f5ed5d625 ("net/sched: act_police: disallow 'goto chain' on fallback control action")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John Hurley [Tue, 27 Nov 2018 22:04:12 +0000 (14:04 -0800)]
nfp: flower: prevent offload if rhashtable insert fails
For flow offload adds, if the rhash insert code fails, the flow will still
have been offloaded but the reference to it in the driver freed.
Re-order the offload setup calls to ensure that a flow will only be written
to FW if a kernel reference is held and stored in the rhashtable. Remove
this hashtable entry if the offload fails.
Fixes:
c01d0efa5136 ("nfp: flower: use rhashtable for flow caching")
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John Hurley [Tue, 27 Nov 2018 22:04:11 +0000 (14:04 -0800)]
nfp: flower: release metadata on offload failure
Calling nfp_compile_flow_metadata both assigns a stats context and
increments a ref counter on (or allocates) a mask id table entry. These
are released by the nfp_modify_flow_metadata call on flow deletion,
however, if a flow add fails after metadata is set then the flow entry
will be deleted but the metadata assignments leaked.
Add an error path to the flow add offload function to ensure allocated
metadata is released in the event of an offload fail.
Fixes:
81f3ddf2547d ("nfp: add control message passing capabilities to flower offloads")
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Toni Peltonen [Tue, 27 Nov 2018 14:56:57 +0000 (16:56 +0200)]
bonding: fix 802.3ad state sent to partner when unbinding slave
Previously when unbinding a slave the 802.3ad implementation only told
partner that the port is not suitable for aggregation by setting the port
aggregation state from aggregatable to individual. This is not enough. If the
physical layer still stays up and we only unbinded this port from the bond there
is nothing in the aggregation status alone to prevent the partner from sending
traffic towards us. To ensure that the partner doesn't consider this
port at all anymore we should also disable collecting and distributing to
signal that this actor is going away. Also clear AD_STATE_SYNCHRONIZATION to
ensure partner exits collecting + distributing state.
I have tested this behaviour againts Arista EOS switches with mlx5 cards
(physical link stays up even when interface is down) and simulated
the same situation virtually Linux <-> Linux with two network namespaces
running two veth device pairs. In both cases setting aggregation to
individual doesn't alone prevent traffic from being to sent towards this
port given that the link stays up in partners end. Partner still keeps
it's end in collecting + distributing state and continues until timeout is
reached. In most cases this means we are losing the traffic partner sends
towards our port while we wait for timeout. This is most visible with slow
periodic time (LACP rate slow).
Other open source implementations like Open VSwitch and libreswitch, and
vendor implementations like Arista EOS, seem to disable collecting +
distributing to when doing similar port disabling/detaching/removing change.
With this patch kernel implementation would behave the same way and ensure
partner doesn't consider our actor viable anymore.
Signed-off-by: Toni Peltonen <peltzi@peltzi.fi>
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Bogdanov [Tue, 27 Nov 2018 14:51:17 +0000 (14:51 +0000)]
net: aquantia: fix rx checksum offload bits
The last set of csum offload fixes had a leak:
Checksum enabled status bits from rx descriptor were incorrectly
interpreted. Consequently all the other valid logic worked on zero bits.
That caused rx checksum offloads never to trigger.
Tested by dumping rx descriptors and validating resulting csum_level.
Reported-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Fixes:
ad703c2b9127f ("net: aquantia: invalid checksumm offload implementation")
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Tue, 27 Nov 2018 14:37:17 +0000 (14:37 +0000)]
openvswitch: fix spelling mistake "execeeds" -> "exceeds"
There is a spelling mistake in a net_warn_ratelimited message, fix this.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Tue, 27 Nov 2018 14:00:15 +0000 (14:00 +0000)]
liquidio: fix spelling mistake "deferal" -> "deferral"
There is a spelling mistake in the oct_stats_strings array, fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thierry Reding [Tue, 27 Nov 2018 13:21:43 +0000 (14:21 +0100)]
net: stmmac: Move debugfs init/exit to ->probe()/->remove()
Setting up and tearing down debugfs is current unbalanced, as seen by
this error during resume from suspend:
[ 752.134067] dwc-eth-dwmac
2490000.ethernet eth0: ERROR failed to create debugfs directory
[ 752.134347] dwc-eth-dwmac
2490000.ethernet eth0: stmmac_hw_setup: failed debugFS registration
The imbalance happens because the driver creates the debugfs hierarchy
when the device is opened and tears it down when the device is closed.
There's little gain in that, and it could be argued that it is even
surprising because it's not usually done for other devices. Fix the
imbalance by moving the debugfs creation and teardown to the driver's
->probe() and ->remove() implementations instead.
Note that the ring descriptors cannot be read while the interface is
down, so make sure to return an empty file when the descriptors_status
debugfs file is read.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Tue, 27 Nov 2018 11:11:50 +0000 (19:11 +0800)]
sctp: update frag_point when stream_interleave is set
sctp_assoc_update_frag_point() should be called whenever asoc->pathmtu
changes, but we missed one place in sctp_association_init(). It would
cause frag_point is zero when sending data.
As says in Jakub's reproducer, if sp->pathmtu is set by socketopt, the
new asoc->pathmtu inherits it in sctp_association_init(). Later when
transports are added and their pmtu >= asoc->pathmtu, it will never
call sctp_assoc_update_frag_point() to set frag_point.
This patch is to fix it by updating frag_point after asoc->pathmtu is
set as sp->pathmtu in sctp_association_init(). Note that it moved them
after sctp_stream_init(), as stream->si needs to be set first.
Frag_point's calculation is also related with datachunk's type, so it
needs to update frag_point when stream->si may be changed in
sctp_process_init().
v1->v2:
- call sctp_assoc_update_frag_point() separately in sctp_process_init
and sctp_association_init, per Marcelo's suggestion.
Fixes:
2f5e3c9df693 ("sctp: introduce sctp_assoc_update_frag_point")
Reported-by: Jakub Audykowicz <jakub.audykowicz@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christoph Paasch [Fri, 30 Nov 2018 00:01:04 +0000 (16:01 -0800)]
net: Prevent invalid access to skb->prev in __qdisc_drop_all
__qdisc_drop_all() accesses skb->prev to get to the tail of the
segment-list.
With commit
68d2f84a1368 ("net: gro: properly remove skb from list")
the skb-list handling has been changed to set skb->next to NULL and set
the list-poison on skb->prev.
With that change, __qdisc_drop_all() will panic when it tries to
dereference skb->prev.
Since commit
992cba7e276d ("net: Add and use skb_list_del_init().")
__list_del_entry is used, leaving skb->prev unchanged (thus,
pointing to the list-head if it's the first skb of the list).
This will make __qdisc_drop_all modify the next-pointer of the list-head
and result in a panic later on:
[ 34.501053] general protection fault: 0000 [#1] SMP KASAN PTI
[ 34.501968] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.20.0-rc2.mptcp #108
[ 34.502887] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011
[ 34.504074] RIP: 0010:dev_gro_receive+0x343/0x1f90
[ 34.504751] Code: e0 48 c1 e8 03 42 80 3c 30 00 0f 85 4a 1c 00 00 4d 8b 24 24 4c 39 65 d0 0f 84 0a 04 00 00 49 8d 7c 24 38 48 89 f8 48 c1 e8 03 <42> 0f b6 04 30 84 c0 74 08 3c 04
[ 34.507060] RSP: 0018:
ffff8883af507930 EFLAGS:
00010202
[ 34.507761] RAX:
0000000000000007 RBX:
ffff8883970b2c80 RCX:
1ffff11072e165a6
[ 34.508640] RDX:
1ffff11075867008 RSI:
ffff8883ac338040 RDI:
0000000000000038
[ 34.509493] RBP:
ffff8883af5079d0 R08:
ffff8883970b2d40 R09:
0000000000000062
[ 34.510346] R10:
0000000000000034 R11:
0000000000000000 R12:
0000000000000000
[ 34.511215] R13:
0000000000000000 R14:
dffffc0000000000 R15:
ffff8883ac338008
[ 34.512082] FS:
0000000000000000(0000) GS:
ffff8883af500000(0000) knlGS:
0000000000000000
[ 34.513036] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 34.513741] CR2:
000055ccc3e9d020 CR3:
00000003abf32000 CR4:
00000000000006e0
[ 34.514593] Call Trace:
[ 34.514893] <IRQ>
[ 34.515157] napi_gro_receive+0x93/0x150
[ 34.515632] receive_buf+0x893/0x3700
[ 34.516094] ? __netif_receive_skb+0x1f/0x1a0
[ 34.516629] ? virtnet_probe+0x1b40/0x1b40
[ 34.517153] ? __stable_node_chain+0x4d0/0x850
[ 34.517684] ? kfree+0x9a/0x180
[ 34.518067] ? __kasan_slab_free+0x171/0x190
[ 34.518582] ? detach_buf+0x1df/0x650
[ 34.519061] ? lapic_next_event+0x5a/0x90
[ 34.519539] ? virtqueue_get_buf_ctx+0x280/0x7f0
[ 34.520093] virtnet_poll+0x2df/0xd60
[ 34.520533] ? receive_buf+0x3700/0x3700
[ 34.521027] ? qdisc_watchdog_schedule_ns+0xd5/0x140
[ 34.521631] ? htb_dequeue+0x1817/0x25f0
[ 34.522107] ? sch_direct_xmit+0x142/0xf30
[ 34.522595] ? virtqueue_napi_schedule+0x26/0x30
[ 34.523155] net_rx_action+0x2f6/0xc50
[ 34.523601] ? napi_complete_done+0x2f0/0x2f0
[ 34.524126] ? kasan_check_read+0x11/0x20
[ 34.524608] ? _raw_spin_lock+0x7d/0xd0
[ 34.525070] ? _raw_spin_lock_bh+0xd0/0xd0
[ 34.525563] ? kvm_guest_apic_eoi_write+0x6b/0x80
[ 34.526130] ? apic_ack_irq+0x9e/0xe0
[ 34.526567] __do_softirq+0x188/0x4b5
[ 34.527015] irq_exit+0x151/0x180
[ 34.527417] do_IRQ+0xdb/0x150
[ 34.527783] common_interrupt+0xf/0xf
[ 34.528223] </IRQ>
This patch makes sure that skb->prev is set to NULL when entering
netem_enqueue.
Cc: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Fixes:
68d2f84a1368 ("net: gro: properly remove skb from list")
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Martin Schiller [Tue, 27 Nov 2018 08:50:29 +0000 (09:50 +0100)]
net/x25: handle call collisions
If a session in X25_STATE_1 (Awaiting Call Accept) receives a call
request, the session will be closed (x25_disconnect), cause=0x01
(Number Busy) and diag=0x48 (Call Collision) will be set and a clear
request will be send.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Martin Schiller [Tue, 27 Nov 2018 08:50:28 +0000 (09:50 +0100)]
net/x25: fix null_x25_address handling
o x25_find_listener(): the compare for the null_x25_address was wrong.
We have to check the x25_addr of the listener socket instead of the
x25_addr of the incomming call.
o x25_bind(): it was not possible to bind a socket to null_x25_address
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Martin Schiller [Tue, 27 Nov 2018 08:50:27 +0000 (09:50 +0100)]
net/x25: fix called/calling length calculation in x25_parse_address_block
The length of the called and calling address was not calculated
correctly (BCD encoding).
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Baruch Siach [Thu, 29 Nov 2018 10:00:05 +0000 (12:00 +0200)]
net: phy: sfp: correct location of SFP standards
SFP standards are now available from the SNIA (Storage Networking
Industry Association) website.
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 29 Nov 2018 19:06:09 +0000 (11:06 -0800)]
Merge branch 'xps-fixes'
Sabrina Dubroca says:
====================
fixes for XPS configuration after Symmetric queue selection
This fixes some bugs introduced by the "Symmetric queue selection
using XPS for Rx queues".
First, the refactoring of the cleanup function skipped resetting the
queue's NUMA node under some conditions.
Second, the accounting on static keys for XPS and RXQS-XPS is
unbalanced, so the static key for XPS won't actually disable itself,
once enabled. The RXQS-XPS static key can actually be disabled by
reconfiguring a device that didn't have RXQS-XPS configured at all.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sabrina Dubroca [Thu, 29 Nov 2018 13:14:49 +0000 (14:14 +0100)]
net: fix XPS static_key accounting
Commit
04157469b7b8 ("net: Use static_key for XPS maps") introduced a
static key for XPS, but the increments/decrements don't match.
First, the static key's counter is incremented once for each queue, but
only decremented once for a whole batch of queues, leading to large
unbalances.
Second, the xps_rxqs_needed key is decremented whenever we reset a batch
of queues, whether they had any rxqs mapping or not, so that if we setup
cpu-XPS on em1 and RXQS-XPS on em2, resetting the queues on em1 would
decrement the xps_rxqs_needed key.
This reworks the accounting scheme so that the xps_needed key is
incremented only once for each type of XPS for all the queues on a
device, and the xps_rxqs_needed key is incremented only once for all
queues. This is sufficient to let us retrieve queues via
get_xps_queue().
This patch introduces a new reset_xps_maps(), which reinitializes and
frees the appropriate map (xps_rxqs_map or xps_cpus_map), and drops a
reference to the needed keys:
- both xps_needed and xps_rxqs_needed, in case of rxqs maps,
- only xps_needed, in case of CPU maps.
Now, we also need to call reset_xps_maps() at the end of
__netif_set_xps_queue() when there's no active map left, for example
when writing '
00000000,
00000000' to all queues' xps_rxqs setting.
Fixes:
04157469b7b8 ("net: Use static_key for XPS maps")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sabrina Dubroca [Thu, 29 Nov 2018 13:14:48 +0000 (14:14 +0100)]
net: restore call to netdev_queue_numa_node_write when resetting XPS
Before commit
80d19669ecd3 ("net: Refactor XPS for CPUs and Rx queues"),
netif_reset_xps_queues() did netdev_queue_numa_node_write() for all the
queues being reset. Now, this is only done when the "active" variable in
clean_xps_maps() is false, ie when on all the CPUs, there's no active
XPS mapping left.
Fixes:
80d19669ecd3 ("net: Refactor XPS for CPUs and Rx queues")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Baruch Siach [Thu, 29 Nov 2018 10:40:11 +0000 (12:40 +0200)]
net: phy: sfp: correct store of detected link modes
The link modes that sfp_parse_support() detects are stored in the
'modes' bitmap. There is no reason to make an exception for 1000Base-PX
or 1000Base-BX10.
Fixes:
03145864bd0f ("sfp: support 1G BiDi (eg, FiberStore SFP-GE-BX) modules")
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 29 Nov 2018 18:38:39 +0000 (10:38 -0800)]
Merge branch 'ave-fixes'
Kunihiko Hayashi says:
====================
fixup AVE ethernet driver
This series adds fixup for AVE ethernet driver that includes increse of
descriptors, replacing macro for linux-next, and adding missing author
information.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Kunihiko Hayashi [Thu, 29 Nov 2018 08:08:38 +0000 (17:08 +0900)]
net: ethernet: ave: Add MODULE_AUTHOR and MAINTAINERS entry
Add missing MODULE_AUTHOR of ave driver and an entry to MAINTAINERS.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kunihiko Hayashi [Thu, 29 Nov 2018 08:08:37 +0000 (17:08 +0900)]
net: ethernet: ave: Replace NET_IP_ALIGN with AVE_FRAME_HEADROOM
In commit
26a4676faa1a ("arm64: mm: define NET_IP_ALIGN to 0"),
AVE controller affects this modification because the controller forces
to ignore lower 2bits of buffer start address, and make 2-byte headroom,
that is, data reception starts from (buffer + 2).
This patch defines AVE_FRAME_HEADROOM macro as hardware-specific value,
and replaces NET_IP_ALIGN with it.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kunihiko Hayashi [Thu, 29 Nov 2018 08:08:36 +0000 (17:08 +0900)]
net: ethernet: ave: Increase descriptors to improve performance
To improve performance, this increases Rx descriptor to 256, Tx descriptor
to 64, and adjusts NAPI weight to NAPI_POLL_WEIGHT.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 28 Nov 2018 20:53:48 +0000 (12:53 -0800)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) ARM64 JIT fixes for subprog handling from Daniel Borkmann.
2) Various sparc64 JIT bug fixes (fused branch convergance, frame
pointer usage detection logic, PSEODU call argument handling).
3) Fix to use BH locking in nf_conncount, from Taehee Yoo.
4) Fix race of TX skb freeing in ipheth driver, from Bernd Eckstein.
5) Handle return value of TX NAPI completion properly in lan743x
driver, from Bryan Whitehead.
6) MAC filter deletion in i40e driver clears wrong state bit, from
Lihong Yang.
7) Fix use after free in rionet driver, from Pan Bian.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (53 commits)
s390/qeth: fix length check in SNMP processing
net: hisilicon: remove unexpected free_netdev
rapidio/rionet: do not free skb before reading its length
i40e: fix kerneldoc for xsk methods
ixgbe: recognize 1000BaseLX SFP modules as 1Gbps
i40e: Fix deletion of MAC filters
igb: fix uninitialized variables
netfilter: nf_tables: deactivate expressions in rule replecement routine
lan743x: Enable driver to work with LAN7431
tipc: fix lockdep warning during node delete
lan743x: fix return value for lan743x_tx_napi_poll
net: via: via-velocity: fix spelling mistake "alignement" -> "alignment"
qed: fix spelling mistake "attnetion" -> "attention"
net: thunderx: fix NULL pointer dereference in nic_remove
sctp: increase sk_wmem_alloc when head->truesize is increased
firestream: fix spelling mistake: "Inititing" -> "Initializing"
net: phy: add workaround for issue where PHY driver doesn't bind to the device
usbnet: ipheth: fix potential recvmsg bug and recvmsg bug 2
sparc: Adjust bpf JIT prologue for PSEUDO calls.
bpf, doc: add entries of who looks over which jits
...
Linus Torvalds [Wed, 28 Nov 2018 20:51:10 +0000 (12:51 -0800)]
Merge tag 'xtensa-
20181128' of git://github.com/jcmvbkbc/linux-xtensa
Pull Xtensa fixes from Max Filippov:
- fix kernel exception on userspace access to a currently disabled
coprocessor
- fix coprocessor data saving/restoring in configurations with multiple
coprocessors
- fix ptrace access to coprocessor data on configurations with multiple
coprocessors with high alignment requirements
* tag 'xtensa-
20181128' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: fix coprocessor part of ptrace_{get,set}xregs
xtensa: fix coprocessor context offset definitions
xtensa: enable coprocessors that are being flushed
David S. Miller [Wed, 28 Nov 2018 19:33:35 +0000 (11:33 -0800)]
Merge branch '1GbE' of git://git./linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Fixes 2018-11-28
This series contains fixes to igb, ixgbe and i40e.
Yunjian Wang from Huawei resolves a variable that could potentially be
NULL before it is used.
Lihong fixes an i40e issue which goes back to 4.17 kernels, where
deleting any of the MAC filters was causing the incorrect syncing for
the PF.
Josh Elsasser caught that there were missing enum values in the link
capabilities for x550 devices, which was preventing link for 1000BaseLX
SFP modules.
Jan fixes the function header comments for XSK methods.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Wed, 28 Nov 2018 15:20:50 +0000 (16:20 +0100)]
s390/qeth: fix length check in SNMP processing
The response for a SNMP request can consist of multiple parts, which
the cmd callback stages into a kernel buffer until all parts have been
received. If the callback detects that the staging buffer provides
insufficient space, it bails out with error.
This processing is buggy for the first part of the response - while it
initially checks for a length of 'data_len', it later copies an
additional amount of 'offsetof(struct qeth_snmp_cmd, data)' bytes.
Fix the calculation of 'data_len' for the first part of the response.
This also nicely cleans up the memcpy code.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 28 Nov 2018 19:02:45 +0000 (11:02 -0800)]
Merge git://git./pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Disable BH while holding list spinlock in nf_conncount, from
Taehee Yoo.
2) List corruption in nf_conncount, also from Taehee.
3) Fix race that results in leaving around an empty list node in
nf_conncount, from Taehee Yoo.
4) Proper chain handling for inactive chains from the commit path,
from Florian Westphal. This includes a selftest for this.
5) Do duplicate rule handles when replacing rules, also from Florian.
6) Remove net_exit path in xt_RATEEST that results in splat, from Taehee.
7) Possible use-after-free in nft_compat when releasing extensions.
From Florian.
8) Memory leak in xt_hashlimit, from Taehee.
9) Call ip_vs_dst_notifier after ipv6_dev_notf, from Xin Long.
10) Fix cttimeout with udplite and gre, from Florian.
11) Preserve oif for IPv6 link-local generated traffic from mangle
table, from Alin Nastac.
12) Missing error handling in masquerade notifiers, from Taehee Yoo.
13) Use mutex to protect registration/unregistration of masquerade
extensions in order to prevent a race, from Taehee.
14) Incorrect condition check in tree_nodes_free(), also from Taehee.
15) Fix chain counter leak in rule replacement path, from Taehee.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pan Bian [Wed, 28 Nov 2018 07:30:24 +0000 (15:30 +0800)]
net: hisilicon: remove unexpected free_netdev
The net device ndev is freed via free_netdev when failing to register
the device. The control flow then jumps to the error handling code
block. ndev is used and freed again. Resulting in a use-after-free bug.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pan Bian [Wed, 28 Nov 2018 06:53:19 +0000 (14:53 +0800)]
rapidio/rionet: do not free skb before reading its length
skb is freed via dev_kfree_skb_any, however, skb->len is read then. This
may result in a use-after-free bug.
Fixes:
e6161d64263 ("rapidio/rionet: rework driver initialization and removal")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jan Sokolowski [Tue, 27 Nov 2018 17:35:35 +0000 (09:35 -0800)]
i40e: fix kerneldoc for xsk methods
One method, xsk_umem_setup, had an incorrect kernel doc
description, which has been corrected.
Also fixes small typos found in the comments.
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Linus Torvalds [Wed, 28 Nov 2018 16:38:20 +0000 (08:38 -0800)]
Merge tag 'for-4.20-rc4-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Some of these bugs are being hit during testing so we'd like to get
them merged, otherwise there are usual stability fixes for stable
trees"
* tag 'for-4.20-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: relocation: set trans to be NULL after ending transaction
Btrfs: fix race between enabling quotas and subvolume creation
Btrfs: send, fix infinite loop due to directory rename dependencies
Btrfs: ensure path name is null terminated at btrfs_control_ioctl
Btrfs: fix rare chances for data loss when doing a fast fsync
btrfs: Always try all copies when reading extent buffers
Linus Torvalds [Wed, 28 Nov 2018 16:33:55 +0000 (08:33 -0800)]
Merge tag 'spi-fix-v4.20-rc4' of git://git./linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few driver specific fixes here, nothing big or that stands out for
anyone other than the driver users.
The omap2-mcspi fix is for issues that started showing up with a
change in defconfig in this release to make cpuidle get turned on by
default"
* tag 'spi-fix-v4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: omap2-mcspi: Add missing suspend and resume calls
spi: mediatek: use correct mata->xfer_len when in fifo transfer
spi: uniphier: fix incorrect property items
Josh Elsasser [Sat, 24 Nov 2018 20:57:33 +0000 (12:57 -0800)]
ixgbe: recognize 1000BaseLX SFP modules as 1Gbps
Add the two 1000BaseLX enum values to the X550's check for 1Gbps modules,
allowing the core driver code to establish a link over this SFP type.
This is done by the out-of-tree driver but the fix wasn't in mainline.
Fixes:
e23f33367882 ("ixgbe: Fix 1G and 10G link stability for X550EM_x SFP+”)
Fixes:
6a14ee0cfb19 ("ixgbe: Add X550 support function pointers")
Signed-off-by: Josh Elsasser <jelsasser@appneta.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Linus Torvalds [Wed, 28 Nov 2018 16:29:18 +0000 (08:29 -0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Bugfixes, many of them reported by syzkaller and mostly predating the
merge window"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: svm: Ensure an IBPB on all affected CPUs when freeing a vmcb
kvm: mmu: Fix race in emulated page table writes
KVM: nVMX: vmcs12 revision_id is always VMCS12_REVISION even when copied from eVMCS
KVM: nVMX: Verify eVMCS revision id match supported eVMCS version on eVMCS VMPTRLD
KVM: nVMX/nSVM: Fix bug which sets vcpu->arch.tsc_offset to L1 tsc_offset
x86/kvm/vmx: fix old-style function declaration
KVM: x86: fix empty-body warnings
KVM: VMX: Update shared MSRs to be saved/restored on MSR_EFER.LMA changes
KVM: x86: Fix kernel info-leak in KVM_HC_CLOCK_PAIRING hypercall
KVM: nVMX: Fix kernel info-leak when enabling KVM_CAP_HYPERV_ENLIGHTENED_VMCS more than once
svm: Add mutex_lock to protect apic_access_page_done on AMD systems
KVM: X86: Fix scan ioapic use-before-initialization
KVM: LAPIC: Fix pv ipis use-before-initialization
KVM: VMX: re-add ple_gap module parameter
KVM: PPC: Book3S HV: Fix handling for interrupted H_ENTER_NESTED
Lihong Yang [Wed, 21 Nov 2018 17:15:37 +0000 (09:15 -0800)]
i40e: Fix deletion of MAC filters
In __i40e_del_filter function, the flag __I40E_MACVLAN_SYNC_PENDING for
the PF state is wrongly set for the VSI. Deleting any of the MAC filters
has caused the incorrect syncing for the PF. Fix it by setting this state
flag to the intended PF.
CC: stable <stable@vger.kernel.org>
Signed-off-by: Lihong Yang <lihong.yang@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Yunjian Wang [Tue, 6 Nov 2018 08:27:12 +0000 (16:27 +0800)]
igb: fix uninitialized variables
This patch fixes the variable 'phy_word' may be used uninitialized.
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Taehee Yoo [Wed, 28 Nov 2018 02:27:28 +0000 (11:27 +0900)]
netfilter: nf_tables: deactivate expressions in rule replecement routine
There is no expression deactivation call from the rule replacement path,
hence, chain counter is not decremented. A few steps to reproduce the
problem:
%nft add table ip filter
%nft add chain ip filter c1
%nft add chain ip filter c1
%nft add rule ip filter c1 jump c2
%nft replace rule ip filter c1 handle 3 accept
%nft flush ruleset
<jump c2> expression means immediate NFT_JUMP to chain c2.
Reference count of chain c2 is increased when the rule is added.
When rule is deleted or replaced, the reference counter of c2 should be
decreased via nft_rule_expr_deactivate() which calls
nft_immediate_deactivate().
Splat looks like:
[ 214.396453] WARNING: CPU: 1 PID: 21 at net/netfilter/nf_tables_api.c:1432 nf_tables_chain_destroy.isra.38+0x2f9/0x3a0 [nf_tables]
[ 214.398983] Modules linked in: nf_tables nfnetlink
[ 214.398983] CPU: 1 PID: 21 Comm: kworker/1:1 Not tainted 4.20.0-rc2+ #44
[ 214.398983] Workqueue: events nf_tables_trans_destroy_work [nf_tables]
[ 214.398983] RIP: 0010:nf_tables_chain_destroy.isra.38+0x2f9/0x3a0 [nf_tables]
[ 214.398983] Code: 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 8e 00 00 00 48 8b 7b 58 e8 e1 2c 4e c6 48 89 df e8 d9 2c 4e c6 eb 9a <0f> 0b eb 96 0f 0b e9 7e fe ff ff e8 a7 7e 4e c6 e9 a4 fe ff ff e8
[ 214.398983] RSP: 0018:
ffff8881152874e8 EFLAGS:
00010202
[ 214.398983] RAX:
0000000000000001 RBX:
ffff88810ef9fc28 RCX:
ffff8881152876f0
[ 214.398983] RDX:
dffffc0000000000 RSI:
1ffff11022a50ede RDI:
ffff88810ef9fc78
[ 214.398983] RBP:
1ffff11022a50e9d R08:
0000000080000000 R09:
0000000000000000
[ 214.398983] R10:
0000000000000000 R11:
0000000000000000 R12:
1ffff11022a50eba
[ 214.398983] R13:
ffff888114446e08 R14:
ffff8881152876f0 R15:
ffffed1022a50ed6
[ 214.398983] FS:
0000000000000000(0000) GS:
ffff888116400000(0000) knlGS:
0000000000000000
[ 214.398983] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 214.398983] CR2:
00007fab9bb5f868 CR3:
000000012aa16000 CR4:
00000000001006e0
[ 214.398983] Call Trace:
[ 214.398983] ? nf_tables_table_destroy.isra.37+0x100/0x100 [nf_tables]
[ 214.398983] ? __kasan_slab_free+0x145/0x180
[ 214.398983] ? nf_tables_trans_destroy_work+0x439/0x830 [nf_tables]
[ 214.398983] ? kfree+0xdb/0x280
[ 214.398983] nf_tables_trans_destroy_work+0x5f5/0x830 [nf_tables]
[ ... ]
Fixes:
bb7b40aecbf7 ("netfilter: nf_tables: bogus EBUSY in chain deletions")
Reported by: Christoph Anton Mitterer <calestyo@scientia.net>
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=914505
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201791
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Bryan Whitehead [Mon, 26 Nov 2018 17:27:10 +0000 (12:27 -0500)]
lan743x: Enable driver to work with LAN7431
This driver was designed to work with both LAN7430 and LAN7431.
The only difference between the two is the LAN7431 has support
for external phy.
This change adds LAN7431 to the list of recognized devices
supported by this driver.
Updates for v2:
changed 'fixes' tag to match defined format
fixes:
23f0703c125b ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Mon, 26 Nov 2018 17:26:14 +0000 (12:26 -0500)]
tipc: fix lockdep warning during node delete
We see the following lockdep warning:
[ 2284.078521] ======================================================
[ 2284.078604] WARNING: possible circular locking dependency detected
[ 2284.078604] 4.19.0+ #42 Tainted: G E
[ 2284.078604] ------------------------------------------------------
[ 2284.078604] rmmod/254 is trying to acquire lock:
[ 2284.078604]
00000000acd94e28 ((&n->timer)#2){+.-.}, at: del_timer_sync+0x5/0xa0
[ 2284.078604]
[ 2284.078604] but task is already holding lock:
[ 2284.078604]
00000000f997afc0 (&(&tn->node_list_lock)->rlock){+.-.}, at: tipc_node_stop+0xac/0x190 [tipc]
[ 2284.078604]
[ 2284.078604] which lock already depends on the new lock.
[ 2284.078604]
[ 2284.078604]
[ 2284.078604] the existing dependency chain (in reverse order) is:
[ 2284.078604]
[ 2284.078604] -> #1 (&(&tn->node_list_lock)->rlock){+.-.}:
[ 2284.078604] tipc_node_timeout+0x20a/0x330 [tipc]
[ 2284.078604] call_timer_fn+0xa1/0x280
[ 2284.078604] run_timer_softirq+0x1f2/0x4d0
[ 2284.078604] __do_softirq+0xfc/0x413
[ 2284.078604] irq_exit+0xb5/0xc0
[ 2284.078604] smp_apic_timer_interrupt+0xac/0x210
[ 2284.078604] apic_timer_interrupt+0xf/0x20
[ 2284.078604] default_idle+0x1c/0x140
[ 2284.078604] do_idle+0x1bc/0x280
[ 2284.078604] cpu_startup_entry+0x19/0x20
[ 2284.078604] start_secondary+0x187/0x1c0
[ 2284.078604] secondary_startup_64+0xa4/0xb0
[ 2284.078604]
[ 2284.078604] -> #0 ((&n->timer)#2){+.-.}:
[ 2284.078604] del_timer_sync+0x34/0xa0
[ 2284.078604] tipc_node_delete+0x1a/0x40 [tipc]
[ 2284.078604] tipc_node_stop+0xcb/0x190 [tipc]
[ 2284.078604] tipc_net_stop+0x154/0x170 [tipc]
[ 2284.078604] tipc_exit_net+0x16/0x30 [tipc]
[ 2284.078604] ops_exit_list.isra.8+0x36/0x70
[ 2284.078604] unregister_pernet_operations+0x87/0xd0
[ 2284.078604] unregister_pernet_subsys+0x1d/0x30
[ 2284.078604] tipc_exit+0x11/0x6f2 [tipc]
[ 2284.078604] __x64_sys_delete_module+0x1df/0x240
[ 2284.078604] do_syscall_64+0x66/0x460
[ 2284.078604] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 2284.078604]
[ 2284.078604] other info that might help us debug this:
[ 2284.078604]
[ 2284.078604] Possible unsafe locking scenario:
[ 2284.078604]
[ 2284.078604] CPU0 CPU1
[ 2284.078604] ---- ----
[ 2284.078604] lock(&(&tn->node_list_lock)->rlock);
[ 2284.078604] lock((&n->timer)#2);
[ 2284.078604] lock(&(&tn->node_list_lock)->rlock);
[ 2284.078604] lock((&n->timer)#2);
[ 2284.078604]
[ 2284.078604] *** DEADLOCK ***
[ 2284.078604]
[ 2284.078604] 3 locks held by rmmod/254:
[ 2284.078604] #0:
000000003368be9b (pernet_ops_rwsem){+.+.}, at: unregister_pernet_subsys+0x15/0x30
[ 2284.078604] #1:
0000000046ed9c86 (rtnl_mutex){+.+.}, at: tipc_net_stop+0x144/0x170 [tipc]
[ 2284.078604] #2:
00000000f997afc0 (&(&tn->node_list_lock)->rlock){+.-.}, at: tipc_node_stop+0xac/0x19
[...}
The reason is that the node timer handler sometimes needs to delete a
node which has been disconnected for too long. To do this, it grabs
the lock 'node_list_lock', which may at the same time be held by the
generic node cleanup function, tipc_node_stop(), during module removal.
Since the latter is calling del_timer_sync() inside the same lock, we
have a potential deadlock.
We fix this letting the timer cleanup function use spin_trylock()
instead of just spin_lock(), and when it fails to grab the lock it
just returns so that the timer handler can terminate its execution.
This is safe to do, since tipc_node_stop() anyway is about to
delete both the timer and the node instance.
Fixes:
6a939f365bdb ("tipc: Auto removal of peer down node instance")
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bryan Whitehead [Mon, 26 Nov 2018 17:04:57 +0000 (12:04 -0500)]
lan743x: fix return value for lan743x_tx_napi_poll
The lan743x driver, when under heavy traffic load, has been noticed
to sometimes hang, or cause a kernel panic.
Debugging reveals that the TX napi poll routine was returning
the wrong value, 'weight'. Most other drivers return 0.
And call napi_complete, instead of napi_complete_done.
Additionally when creating the tx napi poll routine.
Changed netif_napi_add, to netif_tx_napi_add.
Updates for v3:
changed 'fixes' tag to match defined format
Updates for v2:
use napi_complete, instead of napi_complete_done in
lan743x_tx_napi_poll
use netif_tx_napi_add, instead of netif_napi_add for
registration of tx napi poll routine
fixes:
23f0703c125b ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Mon, 26 Nov 2018 15:34:01 +0000 (15:34 +0000)]
net: via: via-velocity: fix spelling mistake "alignement" -> "alignment"
The text in array velocity_gstrings contains a spelling mistake,
rename rx_frame_alignement_errors to rx_frame_alignment_errors.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Mon, 26 Nov 2018 15:53:54 +0000 (15:53 +0000)]
qed: fix spelling mistake "attnetion" -> "attention"
The text in array s_igu_fifo_error_strs contains a spelling mistake,
fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Mon, 26 Nov 2018 14:07:16 +0000 (15:07 +0100)]
net: thunderx: fix NULL pointer dereference in nic_remove
Fix a possible NULL pointer dereference in nic_remove routine
removing the nicpf module if nic_probe fails.
The issue can be triggered with the following reproducer:
$rmmod nicvf
$rmmod nicpf
[ 521.412008] Unable to handle kernel access to user memory outside uaccess routines at virtual address
0000000000000014
[ 521.422777] Mem abort info:
[ 521.425561] ESR = 0x96000004
[ 521.428624] Exception class = DABT (current EL), IL = 32 bits
[ 521.434535] SET = 0, FnV = 0
[ 521.437579] EA = 0, S1PTW = 0
[ 521.440730] Data abort info:
[ 521.443603] ISV = 0, ISS = 0x00000004
[ 521.447431] CM = 0, WnR = 0
[ 521.450417] user pgtable: 4k pages, 48-bit VAs, pgdp =
0000000072a3da42
[ 521.457022] [
0000000000000014] pgd=
0000000000000000
[ 521.461916] Internal error: Oops:
96000004 [#1] SMP
[ 521.511801] Hardware name: GIGABYTE H270-T70/MT70-HD0, BIOS T49 02/02/2018
[ 521.518664] pstate:
80400005 (Nzcv daif +PAN -UAO)
[ 521.523451] pc : nic_remove+0x24/0x88 [nicpf]
[ 521.527808] lr : pci_device_remove+0x48/0xd8
[ 521.532066] sp :
ffff000013433cc0
[ 521.535370] x29:
ffff000013433cc0 x28:
ffff810f6ac50000
[ 521.540672] x27:
0000000000000000 x26:
0000000000000000
[ 521.545974] x25:
0000000056000000 x24:
0000000000000015
[ 521.551274] x23:
ffff8007ff89a110 x22:
ffff000001667070
[ 521.556576] x21:
ffff8007ffb170b0 x20:
ffff8007ffb17000
[ 521.561877] x19:
0000000000000000 x18:
0000000000000025
[ 521.567178] x17:
0000000000000000 x16:
000000000000010ffc33ff98 x8 :
0000000000000000
[ 521.593683] x7 :
0000000000000000 x6 :
0000000000000001
[ 521.598983] x5 :
0000000000000002 x4 :
0000000000000003
[ 521.604284] x3 :
ffff8007ffb17184 x2 :
ffff8007ffb17184
[ 521.609585] x1 :
ffff000001662118 x0 :
ffff000008557be0
[ 521.614887] Process rmmod (pid: 1897, stack limit = 0x00000000859535c3)
[ 521.621490] Call trace:
[ 521.623928] nic_remove+0x24/0x88 [nicpf]
[ 521.627927] pci_device_remove+0x48/0xd8
[ 521.631847] device_release_driver_internal+0x1b0/0x248
[ 521.637062] driver_detach+0x50/0xc0
[ 521.640628] bus_remove_driver+0x60/0x100
[ 521.644627] driver_unregister+0x34/0x60
[ 521.648538] pci_unregister_driver+0x24/0xd8
[ 521.652798] nic_cleanup_module+0x14/0x111c [nicpf]
[ 521.657672] __arm64_sys_delete_module+0x150/0x218
[ 521.662460] el0_svc_handler+0x94/0x110
[ 521.666287] el0_svc+0x8/0xc
[ 521.669160] Code:
aa1e03e0 9102c295 d503201f f9404eb3 (
b9401660)
Fixes:
4863dea3fab0 ("net: Adding support for Cavium ThunderX network controller")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Mon, 26 Nov 2018 06:52:44 +0000 (14:52 +0800)]
sctp: increase sk_wmem_alloc when head->truesize is increased
I changed to count sk_wmem_alloc by skb truesize instead of 1 to
fix the sk_wmem_alloc leak caused by later truesize's change in
xfrm in Commit
02968ccf0125 ("sctp: count sk_wmem_alloc by skb
truesize in sctp_packet_transmit").
But I should have also increased sk_wmem_alloc when head->truesize
is increased in sctp_packet_gso_append() as xfrm does. Otherwise,
sctp gso packet will cause sk_wmem_alloc underflow.
Fixes:
02968ccf0125 ("sctp: count sk_wmem_alloc by skb truesize in sctp_packet_transmit")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Sun, 25 Nov 2018 23:21:08 +0000 (23:21 +0000)]
firestream: fix spelling mistake: "Inititing" -> "Initializing"
There are spelling mistakes in debug messages, fix them.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Fri, 23 Nov 2018 18:41:29 +0000 (19:41 +0100)]
net: phy: add workaround for issue where PHY driver doesn't bind to the device
After switching the r8169 driver to use phylib some user reported that
their network is broken. This was caused by the genphy PHY driver being
used instead of the dedicated PHY driver for the RTL8211B. Users
reported that loading the Realtek PHY driver module upfront fixes the
issue. See also this mail thread:
https://marc.info/?t=
154279781800003&r=1&w=2
The issue is quite weird and the root cause seems to be somewhere in
the base driver core. The patch works around the issue and may be
removed once the actual issue is fixed.
The Fixes tag refers to the first reported occurrence of the issue.
The issue itself may have been existing much longer and it may affect
users of other network chips as well. Users typically will recognize
this issue only if their PHY stops working when being used with the
genphy driver.
Fixes:
f1e911d5d0df ("r8169: add basic phylib support")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bernd Eckstein [Fri, 23 Nov 2018 12:51:26 +0000 (13:51 +0100)]
usbnet: ipheth: fix potential recvmsg bug and recvmsg bug 2
The bug is not easily reproducable, as it may occur very infrequently
(we had machines with 20minutes heavy downloading before it occurred)
However, on a virual machine (VMWare on Windows 10 host) it occurred
pretty frequently (1-2 seconds after a speedtest was started)
dev->tx_skb mab be freed via dev_kfree_skb_irq on a callback
before it is set.
This causes the following problems:
- double free of the skb or potential memory leak
- in dmesg: 'recvmsg bug' and 'recvmsg bug 2' and eventually
general protection fault
Example dmesg output:
[ 134.841986] ------------[ cut here ]------------
[ 134.841987] recvmsg bug: copied
9C24A555 seq
9C24B557 rcvnxt
9C25A6B3 fl 0
[ 134.841993] WARNING: CPU: 7 PID: 2629 at /build/linux-hwe-On9fm7/linux-hwe-4.15.0/net/ipv4/tcp.c:1865 tcp_recvmsg+0x44d/0xab0
[ 134.841994] Modules linked in: ipheth(OE) kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd glue_helper cryptd vmw_balloon intel_rapl_perf joydev input_leds serio_raw vmw_vsock_vmci_transport vsock shpchp i2c_piix4 mac_hid binfmt_misc vmw_vmci parport_pc ppdev lp parport autofs4 vmw_pvscsi vmxnet3 hid_generic usbhid hid vmwgfx ttm drm_kms_helper syscopyarea sysfillrect mptspi mptscsih sysimgblt ahci psmouse fb_sys_fops pata_acpi mptbase libahci e1000 drm scsi_transport_spi
[ 134.842046] CPU: 7 PID: 2629 Comm: python Tainted: G W OE 4.15.0-34-generic #37~16.04.1-Ubuntu
[ 134.842046] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017
[ 134.842048] RIP: 0010:tcp_recvmsg+0x44d/0xab0
[ 134.842048] RSP: 0018:
ffffa6630422bcc8 EFLAGS:
00010286
[ 134.842049] RAX:
0000000000000000 RBX:
ffff997616f4f200 RCX:
0000000000000006
[ 134.842049] RDX:
0000000000000007 RSI:
0000000000000082 RDI:
ffff9976257d6490
[ 134.842050] RBP:
ffffa6630422bd98 R08:
0000000000000001 R09:
000000000004bba4
[ 134.842050] R10:
0000000001e00c6f R11:
000000000004bba4 R12:
ffff99760dee3000
[ 134.842051] R13:
0000000000000000 R14:
ffff99760dee3514 R15:
0000000000000000
[ 134.842051] FS:
00007fe332347700(0000) GS:
ffff9976257c0000(0000) knlGS:
0000000000000000
[ 134.842052] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 134.842053] CR2:
0000000001e41000 CR3:
000000020e9b4006 CR4:
00000000003606e0
[ 134.842055] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 134.842055] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 134.842057] Call Trace:
[ 134.842060] ? aa_sk_perm+0x53/0x1a0
[ 134.842064] inet_recvmsg+0x51/0xc0
[ 134.842066] sock_recvmsg+0x43/0x50
[ 134.842070] SYSC_recvfrom+0xe4/0x160
[ 134.842072] ? __schedule+0x3de/0x8b0
[ 134.842075] ? ktime_get_ts64+0x4c/0xf0
[ 134.842079] SyS_recvfrom+0xe/0x10
[ 134.842082] do_syscall_64+0x73/0x130
[ 134.842086] entry_SYSCALL_64_after_hwframe+0x3d/0xa2
[ 134.842086] RIP: 0033:0x7fe331f5a81d
[ 134.842088] RSP: 002b:
00007ffe8da98398 EFLAGS:
00000246 ORIG_RAX:
000000000000002d
[ 134.842090] RAX:
ffffffffffffffda RBX:
ffffffffffffffff RCX:
00007fe331f5a81d
[ 134.842094] RDX:
00000000000003fb RSI:
0000000001e00874 RDI:
0000000000000003
[ 134.842095] RBP:
00007fe32f642c70 R08:
0000000000000000 R09:
0000000000000000
[ 134.842097] R10:
0000000000000000 R11:
0000000000000246 R12:
00007fe332347698
[ 134.842099] R13:
0000000001b7e0a0 R14:
0000000001e00874 R15:
0000000000000000
[ 134.842103] Code: 24 fd ff ff e9 cc fe ff ff 48 89 d8 41 8b 8c 24 10 05 00 00 44 8b 45 80 48 c7 c7 08 bd 59 8b 48 89 85 68 ff ff ff e8 b3 c4 7d ff <0f> 0b 48 8b 85 68 ff ff ff e9 e9 fe ff ff 41 8b 8c 24 10 05 00
[ 134.842126] ---[ end trace
b7138fc08c83147f ]---
[ 134.842144] general protection fault: 0000 [#1] SMP PTI
[ 134.842145] Modules linked in: ipheth(OE) kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd glue_helper cryptd vmw_balloon intel_rapl_perf joydev input_leds serio_raw vmw_vsock_vmci_transport vsock shpchp i2c_piix4 mac_hid binfmt_misc vmw_vmci parport_pc ppdev lp parport autofs4 vmw_pvscsi vmxnet3 hid_generic usbhid hid vmwgfx ttm drm_kms_helper syscopyarea sysfillrect mptspi mptscsih sysimgblt ahci psmouse fb_sys_fops pata_acpi mptbase libahci e1000 drm scsi_transport_spi
[ 134.842161] CPU: 7 PID: 2629 Comm: python Tainted: G W OE 4.15.0-34-generic #37~16.04.1-Ubuntu
[ 134.842162] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017
[ 134.842164] RIP: 0010:tcp_close+0x2c6/0x440
[ 134.842165] RSP: 0018:
ffffa6630422bde8 EFLAGS:
00010202
[ 134.842167] RAX:
0000000000000000 RBX:
ffff99760dee3000 RCX:
0000000180400034
[ 134.842168] RDX:
5c4afd407207a6c4 RSI:
ffffe868495bd300 RDI:
ffff997616f4f200
[ 134.842169] RBP:
ffffa6630422be08 R08:
0000000016f4d401 R09:
0000000180400034
[ 134.842169] R10:
ffffa6630422bd98 R11:
0000000000000000 R12:
000000000000600c
[ 134.842170] R13:
0000000000000000 R14:
ffff99760dee30c8 R15:
ffff9975bd44fe00
[ 134.842171] FS:
00007fe332347700(0000) GS:
ffff9976257c0000(0000) knlGS:
0000000000000000
[ 134.842173] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 134.842174] CR2:
0000000001e41000 CR3:
000000020e9b4006 CR4:
00000000003606e0
[ 134.842177] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 134.842178] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 134.842179] Call Trace:
[ 134.842181] inet_release+0x42/0x70
[ 134.842183] __sock_release+0x42/0xb0
[ 134.842184] sock_close+0x15/0x20
[ 134.842187] __fput+0xea/0x220
[ 134.842189] ____fput+0xe/0x10
[ 134.842191] task_work_run+0x8a/0xb0
[ 134.842193] exit_to_usermode_loop+0xc4/0xd0
[ 134.842195] do_syscall_64+0xf4/0x130
[ 134.842197] entry_SYSCALL_64_after_hwframe+0x3d/0xa2
[ 134.842197] RIP: 0033:0x7fe331f5a560
[ 134.842198] RSP: 002b:
00007ffe8da982e8 EFLAGS:
00000246 ORIG_RAX:
0000000000000003
[ 134.842200] RAX:
0000000000000000 RBX:
00007fe32f642c70 RCX:
00007fe331f5a560
[ 134.842201] RDX:
00000000008f5320 RSI:
0000000001cd4b50 RDI:
0000000000000003
[ 134.842202] RBP:
00007fe32f6500f8 R08:
000000000000003c R09:
00000000009343c0
[ 134.842203] R10:
0000000000000000 R11:
0000000000000246 R12:
00007fe32f6500d0
[ 134.842204] R13:
00000000008f5320 R14:
00000000008f5320 R15:
0000000001cd4770
[ 134.842205] Code: c8 00 00 00 45 31 e4 49 39 fe 75 4d eb 50 83 ab d8 00 00 00 01 48 8b 17 48 8b 47 08 48 c7 07 00 00 00 00 48 c7 47 08 00 00 00 00 <48> 89 42 08 48 89 10 0f b6 57 34 8b 47 2c 2b 47 28 83 e2 01 80
[ 134.842226] RIP: tcp_close+0x2c6/0x440 RSP:
ffffa6630422bde8
[ 134.842227] ---[ end trace
b7138fc08c831480 ]---
The proposed patch eliminates a potential racing condition.
Before, usb_submit_urb was called and _after_ that, the skb was attached
(dev->tx_skb). So, on a callback it was possible, however unlikely that the
skb was freed before it was set. That way (because dev->tx_skb was not set
to NULL after it was freed), it could happen that a skb from a earlier
transmission was freed a second time (and the skb we should have freed did
not get freed at all)
Now we free the skb directly in ipheth_tx(). It is not passed to the
callback anymore, eliminating the posibility of a double free of the same
skb. Depending on the retval of usb_submit_urb() we use dev_kfree_skb_any()
respectively dev_consume_skb_any() to free the skb.
Signed-off-by: Oliver Zweigle <Oliver.Zweigle@faro.com>
Signed-off-by: Bernd Eckstein <3ernd.Eckstein@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 27 Nov 2018 17:52:05 +0000 (09:52 -0800)]
Merge git://git./pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2018-11-27
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix several bugs in BPF sparc JIT, that is, convergence for fused
branches, initialization of frame pointer register, and moving all
arguments into output registers from input registers in prologue
to fix BPF to BPF calls, from David.
2) Fix a bug in arm64 JIT for fetching BPF to BPF call addresses where
they are not guaranteed to fit into imm field and therefore must be
retrieved through prog aux data, from Daniel.
3) Explicitly add all JITs to MAINTAINERS file with developers able to
help out in feature development, fixes, review, etc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jim Mattson [Tue, 22 May 2018 16:54:20 +0000 (09:54 -0700)]
kvm: svm: Ensure an IBPB on all affected CPUs when freeing a vmcb
Previously, we only called indirect_branch_prediction_barrier on the
logical CPU that freed a vmcb. This function should be called on all
logical CPUs that last loaded the vmcb in question.
Fixes:
15d45071523d ("KVM/x86: Add IBPB support")
Reported-by: Neel Natu <neelnatu@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Junaid Shahid [Wed, 31 Oct 2018 21:53:57 +0000 (14:53 -0700)]
kvm: mmu: Fix race in emulated page table writes
When a guest page table is updated via an emulated write,
kvm_mmu_pte_write() is called to update the shadow PTE using the just
written guest PTE value. But if two emulated guest PTE writes happened
concurrently, it is possible that the guest PTE and the shadow PTE end
up being out of sync. Emulated writes do not mark the shadow page as
unsync-ed, so this inconsistency will not be resolved even by a guest TLB
flush (unless the page was marked as unsync-ed at some other point).
This is fixed by re-reading the current value of the guest PTE after the
MMU lock has been acquired instead of just using the value that was
written prior to calling kvm_mmu_pte_write().
Signed-off-by: Junaid Shahid <junaids@google.com>
Reviewed-by: Wanpeng Li <wanpengli@tencent.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Liran Alon [Tue, 13 Nov 2018 15:44:46 +0000 (17:44 +0200)]
KVM: nVMX: vmcs12 revision_id is always VMCS12_REVISION even when copied from eVMCS
vmcs12 represents the per-CPU cache of L1 active vmcs12.
This cache can be loaded by one of the following:
1) Guest making a vmcs12 active by exeucting VMPTRLD
2) Guest specifying eVMCS in VP assist page and executing
VMLAUNCH/VMRESUME.
Either way, vmcs12 should have revision_id of VMCS12_REVISION.
Which is not equal to eVMCS revision_id which specifies used
VersionNumber of eVMCS struct (e.g. KVM_EVMCS_VERSION).
Specifically, this causes an issue in restoring a nested VM state
because vmx_set_nested_state() verifies that vmcs12->revision_id
is equal to VMCS12_REVISION which was not true in case vmcs12
was populated from an eVMCS by vmx_get_nested_state() which calls
copy_enlightened_to_vmcs12().
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Liran Alon [Thu, 1 Nov 2018 08:57:39 +0000 (10:57 +0200)]
KVM: nVMX: Verify eVMCS revision id match supported eVMCS version on eVMCS VMPTRLD
According to TLFS section 16.11.2 Enlightened VMCS, the first u32
field of eVMCS should specify eVMCS VersionNumber.
This version should be in the range of supported eVMCS versions exposed
to guest via CPUID.0x4000000A.EAX[0:15].
The range which KVM expose to guest in this CPUID field should be the
same as the value returned in vmcs_version by nested_enable_evmcs().
According to the above, eVMCS VMPTRLD should verify that version specified
in given eVMCS is in the supported range. However, current code
mistakenly verfies this field against VMCS12_REVISION.
One can also see that when KVM use eVMCS, it makes sure that
alloc_vmcs_cpu() sets allocated eVMCS revision_id to KVM_EVMCS_VERSION.
Obvious fix should just change eVMCS VMPTRLD to verify first u32 field
of eVMCS is equal to KVM_EVMCS_VERSION.
However, it turns out that Microsoft Hyper-V fails to comply to their
own invented interface: When Hyper-V use eVMCS, it just sets first u32
field of eVMCS to revision_id specified in MSR_IA32_VMX_BASIC (In our
case: VMCS12_REVISION). Instead of used eVMCS version number which is
one of the supported versions specified in CPUID.0x4000000A.EAX[0:15].
To overcome Hyper-V bug, we accept either a supported eVMCS version
or VMCS12_REVISION as valid values for first u32 field of eVMCS.
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Mark Kanda <mark.kanda@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Leonid Shatz [Tue, 6 Nov 2018 10:14:25 +0000 (12:14 +0200)]
KVM: nVMX/nSVM: Fix bug which sets vcpu->arch.tsc_offset to L1 tsc_offset
Since commit
e79f245ddec1 ("X86/KVM: Properly update 'tsc_offset' to
represent the running guest"), vcpu->arch.tsc_offset meaning was
changed to always reflect the tsc_offset value set on active VMCS.
Regardless if vCPU is currently running L1 or L2.
However, above mentioned commit failed to also change
kvm_vcpu_write_tsc_offset() to set vcpu->arch.tsc_offset correctly.
This is because vmx_write_tsc_offset() could set the tsc_offset value
in active VMCS to given offset parameter *plus vmcs12->tsc_offset*.
However, kvm_vcpu_write_tsc_offset() just sets vcpu->arch.tsc_offset
to given offset parameter. Without taking into account the possible
addition of vmcs12->tsc_offset. (Same is true for SVM case).
Fix this issue by changing kvm_x86_ops->write_tsc_offset() to return
actually set tsc_offset in active VMCS and modify
kvm_vcpu_write_tsc_offset() to set returned value in
vcpu->arch.tsc_offset.
In addition, rename write_tsc_offset() callback to write_l1_tsc_offset()
to make it clear that it is meant to set L1 TSC offset.
Fixes:
e79f245ddec1 ("X86/KVM: Properly update 'tsc_offset' to represent the running guest")
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Mihai Carabas <mihai.carabas@oracle.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Leonid Shatz <leonid.shatz@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Yi Wang [Thu, 8 Nov 2018 03:22:21 +0000 (11:22 +0800)]
x86/kvm/vmx: fix old-style function declaration
The inline keyword which is not at the beginning of the function
declaration may trigger the following build warnings, so let's fix it:
arch/x86/kvm/vmx.c:1309:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
arch/x86/kvm/vmx.c:5947:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
arch/x86/kvm/vmx.c:5985:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
arch/x86/kvm/vmx.c:6023:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Yi Wang [Thu, 8 Nov 2018 08:48:36 +0000 (16:48 +0800)]
KVM: x86: fix empty-body warnings
We get the following warnings about empty statements when building
with 'W=1':
arch/x86/kvm/lapic.c:632:53: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
arch/x86/kvm/lapic.c:1907:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
arch/x86/kvm/lapic.c:1936:65: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
arch/x86/kvm/lapic.c:1975:44: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
Rework the debug helper macro to get rid of these warnings.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Liran Alon [Tue, 20 Nov 2018 16:03:25 +0000 (18:03 +0200)]
KVM: VMX: Update shared MSRs to be saved/restored on MSR_EFER.LMA changes
When guest transitions from/to long-mode by modifying MSR_EFER.LMA,
the list of shared MSRs to be saved/restored on guest<->host
transitions is updated (See vmx_set_efer() call to setup_msrs()).
On every entry to guest, vcpu_enter_guest() calls
vmx_prepare_switch_to_guest(). This function should also take care
of setting the shared MSRs to be saved/restored. However, the
function does nothing in case we are already running with loaded
guest state (vmx->loaded_cpu_state != NULL).
This means that even when guest modifies MSR_EFER.LMA which results
in updating the list of shared MSRs, it isn't being taken into account
by vmx_prepare_switch_to_guest() because it happens while we are
running with loaded guest state.
To fix above mentioned issue, add a flag to mark that the list of
shared MSRs has been updated and modify vmx_prepare_switch_to_guest()
to set shared MSRs when running with host state *OR* list of shared
MSRs has been updated.
Note that this issue was mistakenly introduced by commit
678e315e78a7 ("KVM: vmx: add dedicated utility to access guest's
kernel_gs_base") because previously vmx_set_efer() always called
vmx_load_host_state() which resulted in vmx_prepare_switch_to_guest() to
set shared MSRs.
Fixes:
678e315e78a7 ("KVM: vmx: add dedicated utility to access guest's kernel_gs_base")
Reported-by: Eyal Moscovici <eyal.moscovici@oracle.com>
Reviewed-by: Mihai Carabas <mihai.carabas@oracle.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Liran Alon [Wed, 7 Nov 2018 22:43:06 +0000 (00:43 +0200)]
KVM: x86: Fix kernel info-leak in KVM_HC_CLOCK_PAIRING hypercall
kvm_pv_clock_pairing() allocates local var
"struct kvm_clock_pairing clock_pairing" on stack and initializes
all it's fields besides padding (clock_pairing.pad[]).
Because clock_pairing var is written completely (including padding)
to guest memory, failure to init struct padding results in kernel
info-leak.
Fix the issue by making sure to also init the padding with zeroes.
Fixes:
55dd00a73a51 ("KVM: x86: add KVM_HC_CLOCK_PAIRING hypercall")
Reported-by: syzbot+a8ef68d71211ba264f56@syzkaller.appspotmail.com
Reviewed-by: Mark Kanda <mark.kanda@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Liran Alon [Sat, 17 Nov 2018 12:05:06 +0000 (14:05 +0200)]
KVM: nVMX: Fix kernel info-leak when enabling KVM_CAP_HYPERV_ENLIGHTENED_VMCS more than once
Consider the case that userspace enables KVM_CAP_HYPERV_ENLIGHTENED_VMCS twice:
1) kvm_vcpu_ioctl_enable_cap() is called to enable
KVM_CAP_HYPERV_ENLIGHTENED_VMCS which calls nested_enable_evmcs().
2) nested_enable_evmcs() sets enlightened_vmcs_enabled to true and fills
vmcs_version which is then copied to userspace.
3) kvm_vcpu_ioctl_enable_cap() is called again to enable
KVM_CAP_HYPERV_ENLIGHTENED_VMCS which calls nested_enable_evmcs().
4) This time nested_enable_evmcs() just returns 0 as
enlightened_vmcs_enabled is already true. *Without filling
vmcs_version*.
5) kvm_vcpu_ioctl_enable_cap() continues as usual and copies
*uninitialized* vmcs_version to userspace which leads to kernel info-leak.
Fix this issue by simply changing nested_enable_evmcs() to always fill
vmcs_version output argument. Even when enlightened_vmcs_enabled is
already set to true.
Note that SVM's nested_enable_evmcs() should not be modified because it
always returns a non-zero value (-ENODEV) which results in
kvm_vcpu_ioctl_enable_cap() skipping the copy of vmcs_version to
userspace (as it should).
Fixes:
57b119da3594 ("KVM: nVMX: add KVM_CAP_HYPERV_ENLIGHTENED_VMCS capability")
Reported-by: syzbot+cfbc368e283d381f8cef@syzkaller.appspotmail.com
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wei Wang [Mon, 12 Nov 2018 12:23:14 +0000 (12:23 +0000)]
svm: Add mutex_lock to protect apic_access_page_done on AMD systems
There is a race condition when accessing kvm->arch.apic_access_page_done.
Due to it, x86_set_memory_region will fail when creating the second vcpu
for a svm guest.
Add a mutex_lock to serialize the accesses to apic_access_page_done.
This lock is also used by vmx for the same purpose.
Signed-off-by: Wei Wang <wawei@amazon.de>
Signed-off-by: Amadeusz Juskowiak <ajusk@amazon.de>
Signed-off-by: Julian Stecklina <jsteckli@amazon.de>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wanpeng Li [Tue, 20 Nov 2018 08:34:18 +0000 (16:34 +0800)]
KVM: X86: Fix scan ioapic use-before-initialization
Reported by syzkaller:
BUG: unable to handle kernel NULL pointer dereference at
00000000000001c8
PGD
80000003ec4da067 P4D
80000003ec4da067 PUD
3f7bfa067 PMD 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 7 PID: 5059 Comm: debug Tainted: G OE 4.19.0-rc5 #16
RIP: 0010:__lock_acquire+0x1a6/0x1990
Call Trace:
lock_acquire+0xdb/0x210
_raw_spin_lock+0x38/0x70
kvm_ioapic_scan_entry+0x3e/0x110 [kvm]
vcpu_enter_guest+0x167e/0x1910 [kvm]
kvm_arch_vcpu_ioctl_run+0x35c/0x610 [kvm]
kvm_vcpu_ioctl+0x3e9/0x6d0 [kvm]
do_vfs_ioctl+0xa5/0x690
ksys_ioctl+0x6d/0x80
__x64_sys_ioctl+0x1a/0x20
do_syscall_64+0x83/0x6e0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The reason is that the testcase writes hyperv synic HV_X64_MSR_SINT6 msr
and triggers scan ioapic logic to load synic vectors into EOI exit bitmap.
However, irqchip is not initialized by this simple testcase, ioapic/apic
objects should not be accessed.
This can be triggered by the following program:
#define _GNU_SOURCE
#include <endian.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/syscall.h>
#include <sys/types.h>
#include <unistd.h>
uint64_t r[3] = {0xffffffffffffffff, 0xffffffffffffffff, 0xffffffffffffffff};
int main(void)
{
syscall(__NR_mmap, 0x20000000, 0x1000000, 3, 0x32, -1, 0);
long res = 0;
memcpy((void*)0x20000040, "/dev/kvm", 9);
res = syscall(__NR_openat, 0xffffffffffffff9c, 0x20000040, 0, 0);
if (res != -1)
r[0] = res;
res = syscall(__NR_ioctl, r[0], 0xae01, 0);
if (res != -1)
r[1] = res;
res = syscall(__NR_ioctl, r[1], 0xae41, 0);
if (res != -1)
r[2] = res;
memcpy(
(void*)0x20000080,
"\x01\x00\x00\x00\x00\x5b\x61\xbb\x96\x00\x00\x40\x00\x00\x00\x00\x01\x00"
"\x08\x00\x00\x00\x00\x00\x0b\x77\xd1\x78\x4d\xd8\x3a\xed\xb1\x5c\x2e\x43"
"\xaa\x43\x39\xd6\xff\xf5\xf0\xa8\x98\xf2\x3e\x37\x29\x89\xde\x88\xc6\x33"
"\xfc\x2a\xdb\xb7\xe1\x4c\xac\x28\x61\x7b\x9c\xa9\xbc\x0d\xa0\x63\xfe\xfe"
"\xe8\x75\xde\xdd\x19\x38\xdc\x34\xf5\xec\x05\xfd\xeb\x5d\xed\x2e\xaf\x22"
"\xfa\xab\xb7\xe4\x42\x67\xd0\xaf\x06\x1c\x6a\x35\x67\x10\x55\xcb",
106);
syscall(__NR_ioctl, r[2], 0x4008ae89, 0x20000080);
syscall(__NR_ioctl, r[2], 0xae80, 0);
return 0;
}
This patch fixes it by bailing out scan ioapic if ioapic is not initialized in
kernel.
Reported-by: Wei Wu <ww9210@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Wei Wu <ww9210@gmail.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wanpeng Li [Tue, 20 Nov 2018 01:39:30 +0000 (09:39 +0800)]
KVM: LAPIC: Fix pv ipis use-before-initialization
Reported by syzkaller:
BUG: unable to handle kernel NULL pointer dereference at
0000000000000014
PGD
800000040410c067 P4D
800000040410c067 PUD
40410d067 PMD 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 3 PID: 2567 Comm: poc Tainted: G OE 4.19.0-rc5 #16
RIP: 0010:kvm_pv_send_ipi+0x94/0x350 [kvm]
Call Trace:
kvm_emulate_hypercall+0x3cc/0x700 [kvm]
handle_vmcall+0xe/0x10 [kvm_intel]
vmx_handle_exit+0xc1/0x11b0 [kvm_intel]
vcpu_enter_guest+0x9fb/0x1910 [kvm]
kvm_arch_vcpu_ioctl_run+0x35c/0x610 [kvm]
kvm_vcpu_ioctl+0x3e9/0x6d0 [kvm]
do_vfs_ioctl+0xa5/0x690
ksys_ioctl+0x6d/0x80
__x64_sys_ioctl+0x1a/0x20
do_syscall_64+0x83/0x6e0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The reason is that the apic map has not yet been initialized, the testcase
triggers pv_send_ipi interface by vmcall which results in kvm->arch.apic_map
is dereferenced. This patch fixes it by checking whether or not apic map is
NULL and bailing out immediately if that is the case.
Fixes:
4180bf1b65 (KVM: X86: Implement "send IPI" hypercall)
Reported-by: Wei Wu <ww9210@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Wei Wu <ww9210@gmail.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Luiz Capitulino [Fri, 23 Nov 2018 17:02:14 +0000 (12:02 -0500)]
KVM: VMX: re-add ple_gap module parameter
Apparently, the ple_gap parameter was accidentally removed
by commit
c8e88717cfc6b36bedea22368d97667446318291. Add it
back.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Cc: stable@vger.kernel.org
Fixes:
c8e88717cfc6b36bedea22368d97667446318291
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Miller [Tue, 27 Nov 2018 05:55:09 +0000 (21:55 -0800)]
sparc: Adjust bpf JIT prologue for PSEUDO calls.
Move all arguments into output registers from input registers.
This path is exercised by test_verifier.c's "calls: two calls with
args" test. Adjust BPF_TAILCALL_PROLOGUE_SKIP as needed.
Let's also make the prologue length a constant size regardless of
the combination of ->saw_frame_pointer and ->saw_tail_call
settings.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Max Filippov [Tue, 27 Nov 2018 02:06:01 +0000 (18:06 -0800)]
xtensa: fix coprocessor part of ptrace_{get,set}xregs
Layout of coprocessor registers in the elf_xtregs_t and
xtregs_coprocessor_t may be different due to alignment. Thus it is not
always possible to copy data between the xtregs_coprocessor_t structure
and the elf_xtregs_t and get correct values for all registers.
Use a table of offsets and sizes of individual coprocessor register
groups to do coprocessor context copying in the ptrace_getxregs and
ptrace_setxregs.
This fixes incorrect coprocessor register values reading from the user
process by the native gdb on an xtensa core with multiple coprocessors
and registers with high alignment requirements.
Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Max Filippov [Mon, 26 Nov 2018 23:18:26 +0000 (15:18 -0800)]
xtensa: fix coprocessor context offset definitions
Coprocessor context offsets are used by the assembly code that moves
coprocessor context between the individual fields of the
thread_info::xtregs_cp structure and coprocessor registers.
This fixes coprocessor context clobbering on flushing and reloading
during normal user code execution and user process debugging in the
presence of more than one coprocessor in the core configuration.
Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
projects / linux-2.6-microblaze.git / log