drm/panel: otm8009a: Don't double check prepared/enabled

As talked about in commit d2aacaf07395 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.

For the "otm8009a" driver we fully remove the storing of the "enabled"
state and we remove the double-checking, but we still keep the storing
of the "prepared" state since the backlight code in the driver checks
it. This backlight code may not be perfectly safe since there doesn't
appear to be sufficient synchronization between the backlight driver
(which userspace can call into directly) and the code that's
unpreparing the panel. However, this lack of safety is not new and can
be addressed in a future patch.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804140605.RFC.3.I6a4a3c81c78acf5acdc2e5b5d936e19bf57ec07a@changeid

drm/panel: s6e63m0: Don't store+check prepared/enabled

As talked about in commit d2aacaf07395 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.

For the s6e63m0 panel driver, this actually fixes a subtle/minor error
handling bug in s6e63m0_prepare(). In one error case s6e63m0_prepare()
called s6e63m0_unprepare() directly if there was an error. This call
to s6e63m0_unprepare() would have been a no-op since ctx->prepared
wasn't set yet.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804140605.RFC.2.Iabafd062e70f6b6b554cf23eeb75f57a80f7e985@changeid

drm/panel: Don't store+check prepared/enabled for simple cases

As talked about in commit d2aacaf07395 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.

This pile of panel drivers appears to be simple to handle. Based on
code inspection they seemed to be using the prepared/enabled state
simply for double-checking that nothing else in the kernel called them
inconsistently. Now that the core drm_panel is doing the double
checking (and warning) it should be very clear that these devices
don't need their own double-check.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804140605.RFC.1.Ia54954fd2f7645c1b86597494902973f57feeb71@changeid

drm/i915: Move the size computations to drm buddy

- Move roundup_power_of_two() to drm buddy file to support
  the new try harder mechanism for contiguous allocation.

- Move trim function call to drm_buddy_alloc_blocks() function.

Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230909160902.15644-2-Arunpravin.PaneerSelvam@amd.com
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/amdgpu: Move the size computations to drm buddy

- Move roundup_power_of_two() and IS_ALIGNED() computations to
  drm buddy file to support the new try harder mechanism for
  contiguous allocation.

- Move trim function call to drm_buddy_alloc_blocks() function.

Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230909160902.15644-2-Arunpravin.PaneerSelvam@amd.com
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/buddy: Improve contiguous memory allocation

Problem statement: The current method roundup_power_of_two()
to allocate contiguous address triggers -ENOSPC in some cases
even though we have enough free spaces and so to help with
that we introduce a try harder mechanism.

In case of -ENOSPC, the new try harder mechanism rounddown the
original size to power of 2 and iterating over the round down
sized freelist blocks to allocate the required size traversing
RHS and LHS.

As part of the above new method implementation we moved
contiguous/alignment size computation part and trim function
to the drm buddy file.

v2: Modify the alloc_range() function to return total allocated size
    on -ENOSPC err and traverse RHS/LHS to allocate the required
    size (Matthew).

Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230909160902.15644-1-Arunpravin.PaneerSelvam@amd.com
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

fbdev/core: Clean up include statements in fbmem.c

Remove all unnecessary include statements from fbmem.c. Most of
them were for functionality that has meanwhile been moved into
other files.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230907085408.9354-8-tzimmermann@suse.de

fbdev/core: Remove empty internal helpers from fb_logo.c

Remove the two empty helpers for the case the CONFIG_FB_LOGO_EXTRA
has not been set. They are internal functions and only called once.
Providing empty replacements seems like overkill. Instead protect
the call sites with a test for CONFIG_FB_LOGO_EXTRA.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230907085408.9354-7-tzimmermann@suse.de

fbdev/core: Move logo functions into separate source file

Move the fbdev function for displaying boot-up logos into their
own file fb_logo.c. Only build fb_logo.c if CONFIG_LOGO has been
selected. No functional changes.

v2:
* include fb_internal.h (kernel test robot)
* simplify option-parsing ifdefs
* build fb_logo.o iff CONFIG_LOGO has been set

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230907085408.9354-6-tzimmermann@suse.de

fbdev/core: Unexport logo helpers

The interfaces for the fbdev logo are not used outside of the fbdev
module. Hence declare the fbdev logo functions in the internal header
file and remove their symbol exports. Only build the functions if
CONFIG_LOGO has been selected.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230907085408.9354-5-tzimmermann@suse.de

fbdev/core: Fix style of code for boot-up logo

Fix a number of warnings from checkpatch.pl in this code before
moving it into a separate file. This includes

 * Prefer 'unsigned int' to bare use of 'unsigned'
 * space required after that ',' (ctx:VxV)
 * space prohibited after that open parenthesis '('
 * suspect code indent for conditional statements (16, 32)
 * braces {} are not necessary for single statement blocks

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230907085408.9354-4-tzimmermann@suse.de

fbdev/mmp/mmpfb: Do not display boot-up logo

The fbcon module takes care of displaying the logo, if any. Remove
the code form mmpfb. It is probably no tworking as expected, as it
interferes with the framebuffer console. If we want to display the
logo without fbcon, we should implement this in the fbdev core code.

v2:
* add a note on fbcon interference (Javier)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230907085408.9354-3-tzimmermann@suse.de

fbdev/au1200fb: Do not display boot-up logo

The fbcon module takes care of displaying the logo, if any. Remove
the code form au1200fb. If we want to display the logo without fbcon,
we should implement this in the fbdev core code.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230907085408.9354-2-tzimmermann@suse.de

drm/ssd130x: Use bool for ssd130x_deviceinfo flags

The .need_pwm and .need_chargepump fields in struct ssd130x_deviceinfo
are flags that can have only two possible values: 0 and 1.
Reduce kernel size by changing their types from int to bool.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/285005ff361969eff001386c5f97990f0e703838.1692888745.git.geert@linux-m68k.org

drm/ssd130x: Fix screen clearing

Due to the reuse of buffers, ssd130x_clear_screen() no longers clears
the screen, but merely redraws the last image that is residing in the
intermediate buffer.

As there is no point in clearing the intermediate buffer and transposing
an all-black image, fix this by just clearing the HW format buffer, and
writing it to the panel.

Fixes: 49d7d581ceaf4cf8 ("drm/ssd130x: Don't allocate buffers on each plane update")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c19cd5a57205597bb38a446c3871092993498f01.1692888745.git.geert@linux-m68k.org

drm/ssd130x: Print the PWM's label instead of its number

struct pwm_device::pwm is a write-only variable in the pwm core and used
nowhere apart from this and another dev_dbg. So it isn't useful to
identify the used PWM. Emit the PWM's label instead in the debug
message.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230728145824.616687-2-u.kleine-koenig@pengutronix.de

drm/shmobile: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-40-u.kleine-koenig@pengutronix.de

drm/msm: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert the msm drm drivers from always returning zero in the
remove callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-32-u.kleine-koenig@pengutronix.de

drm/mediatek: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert the mediatek drm drivers from always returning zero in
the remove callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-30-u.kleine-koenig@pengutronix.de

drm/mediatek: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-29-u.kleine-koenig@pengutronix.de

drm/ingenic: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert the ingenic drm drivers from always returning zero in
the remove callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-24-u.kleine-koenig@pengutronix.de

drm/imx/ipuv3: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert the ipuv3 imx drivers from always returning zero in
the remove callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-23-u.kleine-koenig@pengutronix.de

drm/mst: Refactor the flow for payload allocation/removement

[Why]
Today, the allocation/deallocation steps and status is a bit unclear.

For instance, payload->vc_start_slot = -1 stands for "the failure of
updating DPCD payload ID table" and can also represent as "payload is not
allocated yet". These two cases should be handled differently and hence
better to distinguish them for better understanding.

[How]
Define enumeration - ALLOCATION_LOCAL, ALLOCATION_DFP and ALLOCATION_REMOTE
to distinguish different allocation status. Adjust the code to handle
different status accordingly for better understanding the sequence of
payload allocation and payload removement.

For payload creation, the procedure should look like this:
DRM part 1:
* step 1 - update sw mst mgr variables to add a new payload
* step 2 - add payload at immediate DFP DPCD payload table

Driver:
* Add new payload in HW and sync up with DFP by sending ACT

DRM Part 2:
* Send ALLOCATE_PAYLOAD sideband message to allocate bandwidth along the
  virtual channel.

And as for payload removement, the procedure should look like this:
DRM part 1:
* step 1 - Send ALLOCATE_PAYLOAD sideband message to release bandwidth
           along the virtual channel
* step 2 - Clear payload allocation at immediate DFP DPCD payload table

Driver:
* Remove the payload in HW and sync up with DFP by sending ACT

DRM part 2:
* update sw mst mgr variables to remove the payload

Note that it's fine to fail when communicate with the branch device
connected at immediate downstrean-facing port, but updating variables of
SW mst mgr and HW configuration should be conducted anyway. That's because
it's under commit_tail and we need to complete the HW programming.

Changes since v1:
* Remove the set but not use variable 'old_payload' in function
  'nv50_msto_prepare'. Catched by kernel test robot <lkp@intel.com>

Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230807025639.1612361-3-Wayne.Lin@amd.com

drm/mst: delete unnecessary case in drm_dp_add_payload_part2()

[Why]
There is no need to consider payload->delete case since we won't call
drm_dp_add_payload_part2() to create a payload when we're about to
remove it.

[How]
Delete unnecessary case to simplify the code.

Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230807025639.1612361-2-Wayne.Lin@amd.com

drm/tests: Zero initialize fourccs_out

fourccs_out array is not initialized. As the
drm_fb_build_fourcc_list() doesn't necessarily change all the array,
and the test compares all of it, the comparison could fail if the
array is not initialized. Zero initialize the array to fix this.

Fixes: 371e0b186a13 ("drm/tests: Add KUnit tests for drm_fb_build_fourcc_list()")
Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901-zero-init-fourcc-list-test-v1-1-68bc4cc738c8@riseup.net

drm/debugfs: Add inline to drm_debugfs_dev_init() to suppres -Wunused-function

When CONFIG_DEBUG_FS is not set -Wunused-function warnings appear,
make the static function inline to suppress that.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309012114.T8Vlfaf8-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202309012131.FeakBzEj-lkp@intel.com/
Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901-debugfs-fix-unused-function-warning-v1-1-161dd0902975@riseup.net

drm/doc/rfc: Mark GPU VA as complete.

Nouveau has landed the GPU VA helpers, support and documentation
already and Xe is already using the upstream GPU VA.

Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/commit/ea4ae69e66b2940107e74f240ecb9dae87bf1ff1
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/commits/drm-xe-next?ref_type=heads
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230829163005.54067-4-rodrigo.vivi@intel.com

drm/doc/rfc: Mark DRM_VM_BIND as complete.

The consensus is for individual drivers VM_BIND uapis with
the GPUVA helpers that are already implemented and merged
upstream.

The merged GPUVA documentation also establish some overall
rules for the locking to be followed by the drivers.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230829163005.54067-3-rodrigo.vivi@intel.com

drm/doc/rfc: Mark Dev_coredump as completed.

Xe is already using devcoredump infrastructure as the primary
error state and all the changes needed for user space error
replay and other useful logs are getting added into xe_devcoredump.

Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/blob/drm-xe-next/drivers/gpu/drm/xe/xe_devcoredump.c
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230829163005.54067-2-rodrigo.vivi@intel.com

drm/doc/rfc: No STAGING out of drivers/staging.

Also the uapi should be reviewed and scrutinized before xe
is accepted upstream and we shouldn't cause regression.

Link: https://lore.kernel.org/all/20230630100059.122881-1-thomas.hellstrom@linux.intel.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230829163005.54067-1-rodrigo.vivi@intel.com

drm/connector: document DRM_MODE_COLORIMETRY_COUNT

The drm_colorspace enum member DRM_MODE_COLORIMETRY_COUNT has been
properly documented by moving the description out of the enum to the
member description list to get rid of an additional warning and improve
documentation clarity.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906-topic-drm_connector_doc-v2-1-1f2dcaa43269@gmail.com

drm/bridge: Drop CONFIG_OF conditionals around of_node pointers

Having conditional around the of_node pointers turns out to make driver
code use ugly #ifdef and #if blocks. So drop the conditionals.

Suggested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230831080938.47454-4-biju.das.jz@bp.renesas.com

drm/bridge: Drop conditionals around of_node pointers

This patch is based on commit c9e358dfc4a8 ("driver-core: remove
conditionals around devicetree pointers").

Having conditional around the of_node pointer of the drm_bridge
structure turns out to make driver code use ugly #ifdef blocks. Drop the
conditionals to simplify drivers. While this slightly increases the size
of struct drm_bridge on non-OF system, the number of bridges used today
and foreseen tomorrow on those systems is very low, so this shouldn't be
an issue.

So drop #if conditionals by adding struct device_node forward declaration.

Suggested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230831080938.47454-3-biju.das.jz@bp.renesas.com

drm/bridge/analogix/anx78xx: Drop ID table

The driver has an ID table, but it uses the wrong API for retrieving match
data and that will lead to a crash, if it is instantiated by user space or
using ID. From this, there is no user for the ID table and let's drop it
from the driver as it saves some memory.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230831080938.47454-2-biju.das.jz@bp.renesas.com

MAINTAINERS: Add Jessica as a reviewer for drm/panel

As I participate more actively in the drm/panel subsystem, I would
like to get notified about new changes in this area.

Since I have contributed and continue to contribute to drm/panel,
add myself as a reviewer for the DRM panel drivers to help the review
process

Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230831225738.26527-1-quic_jesszhan@quicinc.com

drm/bridge: lt8912b: Add missing drm_bridge_attach call

The driver does not call drm_bridge_attach(), which causes the next
bridge to not be added to the bridge chain. This causes the pipeline
init to fail when DRM_BRIDGE_ATTACH_NO_CONNECTOR is used.

Add the call to drm_bridge_attach().

Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804-lt8912b-v1-4-c542692c6a2f@ideasonboard.com

drm/bridge: lt8912b: Manually disable HPD only if it was enabled

lt8912b only calls drm_bridge_hpd_enable() if it creates a connector and
the next bridge has DRM_BRIDGE_OP_HPD set. However, when calling
drm_bridge_hpd_disable() it misses checking if a connector was created,
calling drm_bridge_hpd_disable() even if HPD was never enabled. I don't
see any issues caused by this wrong call, though.

Add the check to avoid wrongly calling drm_bridge_hpd_disable().

Fixes: 3b0a01a6a522 ("drm/bridge: lt8912b: Add hot plug detection")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804-lt8912b-v1-3-c542692c6a2f@ideasonboard.com

drm/bridge: lt8912b: Fix crash on bridge detach

The lt8912b driver, in its bridge detach function, calls
drm_connector_unregister() and drm_connector_cleanup().

drm_connector_unregister() should be called only for connectors
explicitly registered with drm_connector_register(), which is not the
case in lt8912b.

The driver's drm_connector_funcs.destroy hook is set to
drm_connector_cleanup().

Thus the driver should not call either drm_connector_unregister() nor
drm_connector_cleanup() in its lt8912_bridge_detach(), as they cause a
crash on bridge detach:

Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Mem abort info:
  ESR = 0x0000000096000006
  EC = 0x25: DABT (current EL), IL = 32 bits
  SET = 0, FnV = 0
  EA = 0, S1PTW = 0
  FSC = 0x06: level 2 translation fault
Data abort info:
  ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000
  CM = 0, WnR = 0, TnD = 0, TagAccess = 0
  GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=00000000858f3000
[0000000000000000] pgd=0800000085918003, p4d=0800000085918003, pud=0800000085431003, pmd=0000000000000000
Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP
Modules linked in: tidss(-) display_connector lontium_lt8912b tc358768 panel_lvds panel_simple drm_dma_helper drm_kms_helper drm drm_panel_orientation_quirks
CPU: 3 PID: 462 Comm: rmmod Tainted: G        W          6.5.0-rc2+ #2
Hardware name: Toradex Verdin AM62 on Verdin Development Board (DT)
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : drm_connector_cleanup+0x78/0x2d4 [drm]
lr : lt8912_bridge_detach+0x54/0x6c [lontium_lt8912b]
sp : ffff800082ed3a90
x29: ffff800082ed3a90 x28: ffff0000040c1940 x27: 0000000000000000
x26: 0000000000000000 x25: dead000000000122 x24: dead000000000122
x23: dead000000000100 x22: ffff000003fb6388 x21: 0000000000000000
x20: 0000000000000000 x19: ffff000003fb6260 x18: fffffffffffe56e8
x17: 0000000000000000 x16: 0010000000000000 x15: 0000000000000038
x14: 0000000000000000 x13: ffff800081914b48 x12: 000000000000040e
x11: 000000000000015a x10: ffff80008196ebb8 x9 : ffff800081914b48
x8 : 00000000ffffefff x7 : ffff0000040c1940 x6 : ffff80007aa649d0
x5 : 0000000000000000 x4 : 0000000000000001 x3 : ffff80008159e008
x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
 drm_connector_cleanup+0x78/0x2d4 [drm]
 lt8912_bridge_detach+0x54/0x6c [lontium_lt8912b]
 drm_bridge_detach+0x44/0x84 [drm]
 drm_encoder_cleanup+0x40/0xb8 [drm]
 drmm_encoder_alloc_release+0x1c/0x30 [drm]
 drm_managed_release+0xac/0x148 [drm]
 drm_dev_put.part.0+0x88/0xb8 [drm]
 devm_drm_dev_init_release+0x14/0x24 [drm]
 devm_action_release+0x14/0x20
 release_nodes+0x5c/0x90
 devres_release_all+0x8c/0xe0
 device_unbind_cleanup+0x18/0x68
 device_release_driver_internal+0x208/0x23c
 driver_detach+0x4c/0x94
 bus_remove_driver+0x70/0xf4
 driver_unregister+0x30/0x60
 platform_driver_unregister+0x14/0x20
 tidss_platform_driver_exit+0x18/0xb2c [tidss]
 __arm64_sys_delete_module+0x1a0/0x2b4
 invoke_syscall+0x48/0x110
 el0_svc_common.constprop.0+0x60/0x10c
 do_el0_svc_compat+0x1c/0x40
 el0_svc_compat+0x40/0xac
 el0t_32_sync_handler+0xb0/0x138
 el0t_32_sync+0x194/0x198
Code: 9104a276 f2fbd5b7 aa0203e1 91008af8 (f85c0420)

Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804-lt8912b-v1-2-c542692c6a2f@ideasonboard.com

drm/bridge: lt8912b: Fix bridge_detach

The driver calls lt8912_bridge_detach() from its lt8912_remove()
function. As the DRM core detaches bridges automatically, this leads to
calling lt8912_bridge_detach() twice. The code probably has tried to
manage the double-call with the 'is_attached' variable, but the driver
never sets the variable to false, so its of no help.

Fix the issue by dropping the call to lt8912_bridge_detach() from
lt8912_remove(), as the DRM core will handle the detach call for us,
and also drop the useless is_attached field.

Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804-lt8912b-v1-1-c542692c6a2f@ideasonboard.com

drm: bridge: it66121: Fix invalid connector dereference

Fix the NULL pointer dereference when no monitor is connected, and the
sound card is opened from userspace.

Instead return an empty buffer (of zeroes) as the EDID information to
the sound framework if there is no connector attached.

Fixes: e0fd83dbe924 ("drm: bridge: it66121: Add audio support")
Reported-by: Nishanth Menon <nm@ti.com>
Closes: https://lore.kernel.org/all/20230825105849.crhon42qndxqif4i@gondola/
Reviewed-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901-it66121_edid-v2-1-aa59605336b9@ti.com

drm: bridge: it66121: Simplify probe()

Simplify probe() by replacing of_device_get_match_data() and ID lookup
for retrieving match data by i2c_get_match_data().

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230818191817.340360-3-biju.das.jz@bp.renesas.com

drm: bridge: it66121: Extend match support for OF tables

The driver has OF match table, still it uses ID lookup table for
retrieving match data. Currently the driver is working on the
assumption that a I2C device registered via OF will always match a
legacy I2C device ID. The correct approach is to have an OF device ID
table using of_device_match_data() if the devices are registered via OF.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230818191817.340360-2-biju.das.jz@bp.renesas.com

staging/fbtft: Use fb_ops helpers for deferred I/O

Generate callback functions for struct fb_ops with the fbdev macro
FB_GEN_DEFAULT_DEFERRED_SYSMEM_OPS(). Initialize struct fb_ops to
the generated functions with an fbdev initializer macro.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230828132131.29295-9-tzimmermann@suse.de

staging/fbtft: Initialize fb_op struct as static const

Replace dynamic allocation of the fb_ops instance with static
allocation. Initialize the fields at module-load time. The owner
field changes to THIS_MODULE, as in all other fbdev drivers.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230828132131.29295-8-tzimmermann@suse.de

hid/picolcd: Use fb_ops helpers for deferred I/O

Generate callback functions for struct fb_ops with the fbdev macro
FB_GEN_DEFAULT_DEFERRED_SYSMEM_OPS(). Initialize struct fb_ops to
the generated functions with an fbdev initializer macro.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: "Bruno Prémont" <bonbons@linux-vserver.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230828132131.29295-7-tzimmermann@suse.de

hid: Remove trailing whitespace

Fix coding style in Kconfig. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230828132131.29295-6-tzimmermann@suse.de

fbdev/hyperv_fb: Use fb_ops helpers for deferred I/O

Generate callback functions for struct fb_ops with the fbdev macro
FB_GEN_DEFAULT_DEFERRED_IOMEM_OPS(). Initialize struct fb_ops to
the generated functions with fbdev initializer macros.

The hyperv_fb driver is incomplete in its handling of deferred I/O
and damage framebuffers. Write operations do no trigger damage handling.
Fixing this is beyond the scope of this patch.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230828132131.29295-5-tzimmermann@suse.de

fbdev: Add Kconfig macro FB_IOMEM_HELPERS_DEFERRED

The new Kconfig macro FB_IOMEM_HELPERS_DEFERRED selects fbdev's
helpers for device I/O memory and deferred I/O. Drivers should
use it if they perform damage updates on device I/O memory.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230828132131.29295-4-tzimmermann@suse.de

fbdev/udlfb: Use fb_ops helpers for deferred I/O

Generate callback functions for struct fb_ops with the fbdev macro
FB_GEN_DEFAULT_DEFERRED_SYSMEM_OPS(). Initialize struct fb_ops to
the generated functions with fbdev initializer macros.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Bernie Thompson <bernie@plugable.com>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230828132131.29295-3-tzimmermann@suse.de

fbdev/smscufx: Use fb_ops helpers for deferred I/O

Generate callback functions for struct fb_ops with the fbdev macro
FB_GEN_DEFAULT_DEFERRED_SYSMEM_OPS(). Initialize struct fb_ops to
the generated functions with fbdev initializer macros.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Steve Glendinning <steve.glendinning@shawell.net>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230828132131.29295-2-tzimmermann@suse.de

accel/ivpu: Print information about used workarounds

Use ivpu_dbg(MISC) to print information about workarounds.

Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901094957.168898-6-stanislaw.gruszka@linux.intel.com

accel/ivpu: Move MMU register definitions to ivpu_mmu.c

MMU registers are not platform specific so they should be defined
separate to platform regs.

Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901094957.168898-12-stanislaw.gruszka@linux.intel.com

accel/ivpu/37xx: White space cleanup

No functional change, adjust code formatting so that defines line up
nicely to improve code readability.

Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901094957.168898-11-stanislaw.gruszka@linux.intel.com

accel/ivpu/37xx: Change register rename leftovers

Change remaining MTL_VPU_ register names to generation based names.

Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901094957.168898-10-stanislaw.gruszka@linux.intel.com

accel/ivpu: Move ivpu_fw_load() to ivpu_fw_init()

ivpu_fw_load() doesn't have to be called separately in ivpu_dev_init().

Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901094957.168898-8-stanislaw.gruszka@linux.intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20230901094957.168898-7-stanislaw.gruszka@linux.intel.com

accel/ivpu: Initialize context with SSID = 1

Context with SSID = 1 is reserved and accesses on that context happen
only when context is uninitialized on the VPU side. Such access triggers
MMU fault (0xa) "Invalid CD Fetch", which doesn't contain any useful
information besides context ID.

This commit will change that state, now (0x10) "Translation fault" will
be triggered and accessed address will shown in the log.

Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901094957.168898-7-stanislaw.gruszka@linux.intel.com

accel/ivpu: Add information about context on failure

Identify the mmu context that failed to initialize in the error messages.
This allows the error to be correlated with a specific user during debug.

Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901094957.168898-5-stanislaw.gruszka@linux.intel.com

accel/ivpu: Make ivpu_pm_init() void

ivpu_pm_init() does not return any error, make it void.

Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901094957.168898-4-stanislaw.gruszka@linux.intel.com

accel/ivpu: Remove duplicated error messages

Reduce the number of error messages per single failure in
ivpu_dev_init() and ivpu_probe().

Most error messages are already printed by functions called
from ivpu_dev_init(). Add missed error prints in ivpu_ipc_init()
and ivpu_mmu_context_init().

Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901094957.168898-3-stanislaw.gruszka@linux.intel.com

accel/ivpu: Move set autosuspend delay to HW specific code

Configure autosuspend values per HW generation and per platform.

For non silicon platforms disable autosuspend for now, for silicon
reduce it to 10 ms.

Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901094957.168898-2-stanislaw.gruszka@linux.intel.com

MAINTAINERS: Add Boris Brezillon as Panfrost driver maintainer

Add Boris Brezillon as Panfrost driver maintainer. Boris is a new lead
developer of the Panfrost Mesa driver and main developer behind the
upcoming Panthor kernel driver that will serve next-gen Mali GPUs.

Remove Tomeu and Alyssa, who left Collabora and stepped down from working
on Panfrost.

Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Tomeu Vizoso <tomeu.vizoso@tomeuvizoso.net>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Acked-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230822052555.538110-1-dmitry.osipenko@collabora.com

drm/virtio: Remove unused function declarations

Commit dc5698e80cf7 ("Add virtio gpu driver.") declared but never
implemented virtio_gpu_attach_status_page()/virtio_gpu_detach_status_page()
Also commit 62fb7a5e1096 ("virtio-gpu: add 3d/virgl support")
declared but never implemented virtio_gpu_fence_ack() and
virtio_gpu_dequeue_fence_func().
Commit c84adb304c10 ("drm/virtio: Support virtgpu exported resources")
declared but never implemented virtgpu_gem_prime_get_uuid().

Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230811101823.32344-1-yuehaibing@huawei.com

drm/debugfs: rework drm_debugfs_create_files implementation v2

Use managed memory allocation for this. That allows us to not keep
track of all the files any more.

v2: keep drm_debugfs_cleanup(), but rename to drm_debugfs_unregister(),
    we still need to cleanup the symlink

Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230829110115.3442-6-christian.koenig@amd.com
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>

drm/debugfs: remove dev->debugfs_list and debugfs_mutex v2

The mutex was completely pointless in the first place since any
parallel adding of files to this list would result in random
behavior since the list is filled and consumed multiple times.

Completely drop that approach and just create the files directly but
return -ENODEV while opening the file when the minors are not
registered yet.

v2: rebase on debugfs directory rework, limit access before minors are
    registered.

Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230829110115.3442-5-christian.koenig@amd.com
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>

drm/debugfs: rework debugfs directory creation v5

Instead of the per minor directories only create a single debugfs
directory for the whole device directly when the device is initialized.

For DRM devices each minor gets a symlink to the per device directory
for now until we can be sure that this isn't useful any more in any way.

Accel devices create only the per device directory and also drops the mid
layer callback to create driver specific files.

v2: cleanup accel component as well
v3: fix typo when debugfs is disabled
v4: call drm_debugfs_dev_fini() during release as well,
    some kerneldoc typos fixed
v5: rebased and one more kerneldoc fix

Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230829110115.3442-4-christian.koenig@amd.com
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>

drm/komeda: drop all currently held locks if deadlock happens

If komeda_pipeline_unbound_components() returns -EDEADLK,
it means that a deadlock happened in the locking context.
Currently, komeda is not dealing with the deadlock properly,producing the
following output when CONFIG_DEBUG_WW_MUTEX_SLOWPATH is enabled:

 ------------[ cut here ]------------
[   26.103984] WARNING: CPU: 2 PID: 345 at drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c:1248
       komeda_release_unclaimed_resources+0x13c/0x170
[   26.117453] Modules linked in:
[   26.120511] CPU: 2 PID: 345 Comm: composer@2.1-se Kdump: loaded Tainted: G   W  5.10.110-SE-SDK1.8-dirty #16
[   26.131374] Hardware name: Siengine Se1000 Evaluation board (DT)
[   26.137379] pstate: 20400009 (nzCv daif +PAN -UAO -TCO BTYPE=--)
[   26.143385] pc : komeda_release_unclaimed_resources+0x13c/0x170
[   26.149301] lr : komeda_release_unclaimed_resources+0xbc/0x170
[   26.155130] sp : ffff800017b8b8d0
[   26.158442] pmr_save: 000000e0
[   26.161493] x29: ffff800017b8b8d0 x28: ffff000cf2f96200
[   26.166805] x27: ffff000c8f5a8800 x26: 0000000000000000
[   26.172116] x25: 0000000000000038 x24: ffff8000116a0140
[   26.177428] x23: 0000000000000038 x22: ffff000cf2f96200
[   26.182739] x21: ffff000cfc300300 x20: ffff000c8ab77080
[   26.188051] x19: 0000000000000003 x18: 0000000000000000
[   26.193362] x17: 0000000000000000 x16: 0000000000000000
[   26.198672] x15: b400e638f738ba38 x14: 0000000000000000
[   26.203983] x13: 0000000106400a00 x12: 0000000000000000
[   26.209294] x11: 0000000000000000 x10: 0000000000000000
[   26.214604] x9 : ffff800012f80000 x8 : ffff000ca3308000
[   26.219915] x7 : 0000000ff3000000 x6 : ffff80001084034c
[   26.225226] x5 : ffff800017b8bc40 x4 : 000000000000000f
[   26.230536] x3 : ffff000ca3308000 x2 : 0000000000000000
[   26.235847] x1 : 0000000000000000 x0 : ffffffffffffffdd
[   26.241158] Call trace:
[   26.243604] komeda_release_unclaimed_resources+0x13c/0x170
[   26.249175] komeda_crtc_atomic_check+0x68/0xf0
[   26.253706] drm_atomic_helper_check_planes+0x138/0x1f4
[   26.258929] komeda_kms_check+0x284/0x36c
[   26.262939] drm_atomic_check_only+0x40c/0x714
[   26.267381] drm_atomic_nonblocking_commit+0x1c/0x60
[   26.272344] drm_mode_atomic_ioctl+0xa3c/0xb8c
[   26.276787] drm_ioctl_kernel+0xc4/0x120
[   26.280708] drm_ioctl+0x268/0x534
[   26.284109] __arm64_sys_ioctl+0xa8/0xf0
[   26.288030] el0_svc_common.constprop.0+0x80/0x240
[   26.292817] do_el0_svc+0x24/0x90
[   26.296132] el0_svc+0x20/0x30
[   26.299185] el0_sync_handler+0xe8/0xf0
[   26.303018] el0_sync+0x1a4/0x1c0
[   26.306330] irq event stamp: 0
[   26.309384] hardirqs last  enabled at (0): [<0000000000000000>] 0x0
[   26.315650] hardirqs last disabled at (0): [<ffff800010056d34>] copy_process+0x5d0/0x183c
[   26.323825] softirqs last  enabled at (0): [<ffff800010056d34>] copy_process+0x5d0/0x183c
[   26.331997] softirqs last disabled at (0): [<0000000000000000>] 0x0
[   26.338261] ---[ end trace 20ae984fa860184a ]---
[   26.343021] ------------[ cut here ]------------
[   26.347646] WARNING: CPU: 3 PID: 345 at drivers/gpu/drm/drm_modeset_lock.c:228 drm_modeset_drop_locks+0x84/0x90
[   26.357727] Modules linked in:
[   26.360783] CPU: 3 PID: 345 Comm: composer@2.1-se Kdump: loaded Tainted: G   W  5.10.110-SE-SDK1.8-dirty #16
[   26.371645] Hardware name: Siengine Se1000 Evaluation board (DT)
[   26.377647] pstate: 20400009 (nzCv daif +PAN -UAO -TCO BTYPE=--)
[   26.383649] pc : drm_modeset_drop_locks+0x84/0x90
[   26.388351] lr : drm_mode_atomic_ioctl+0x860/0xb8c
[   26.393137] sp : ffff800017b8bb10
[   26.396447] pmr_save: 000000e0
[   26.399497] x29: ffff800017b8bb10 x28: 0000000000000001
[   26.404807] x27: 0000000000000038 x26: 0000000000000002
[   26.410115] x25: ffff000cecbefa00 x24: ffff000cf2f96200
[   26.415423] x23: 0000000000000001 x22: 0000000000000018
[   26.420731] x21: 0000000000000001 x20: ffff800017b8bc10
[   26.426039] x19: 0000000000000000 x18: 0000000000000000
[   26.431347] x17: 0000000002e8bf2c x16: 0000000002e94c6b
[   26.436655] x15: 0000000002ea48b9 x14: ffff8000121f0300
[   26.441963] x13: 0000000002ee2ca8 x12: ffff80001129cae0
[   26.447272] x11: ffff800012435000 x10: ffff000ed46b5e88
[   26.452580] x9 : ffff000c9935e600 x8 : 0000000000000000
[   26.457888] x7 : 000000008020001e x6 : 000000008020001f
[   26.463196] x5 : ffff80001085fbe0 x4 : fffffe0033a59f20
[   26.468504] x3 : 000000008020001e x2 : 0000000000000000
[   26.473813] x1 : 0000000000000000 x0 : ffff000c8f596090
[   26.479122] Call trace:
[   26.481566] drm_modeset_drop_locks+0x84/0x90
[   26.485918] drm_mode_atomic_ioctl+0x860/0xb8c
[   26.490359] drm_ioctl_kernel+0xc4/0x120
[   26.494278] drm_ioctl+0x268/0x534
[   26.497677] __arm64_sys_ioctl+0xa8/0xf0
[   26.501598] el0_svc_common.constprop.0+0x80/0x240
[   26.506384] do_el0_svc+0x24/0x90
[   26.509697] el0_svc+0x20/0x30
[   26.512748] el0_sync_handler+0xe8/0xf0
[   26.516580] el0_sync+0x1a4/0x1c0
[   26.519891] irq event stamp: 0
[   26.522943] hardirqs last  enabled at (0): [<0000000000000000>] 0x0
[   26.529207] hardirqs last disabled at (0): [<ffff800010056d34>] copy_process+0x5d0/0x183c
[   26.537379] softirqs last  enabled at (0): [<ffff800010056d34>] copy_process+0x5d0/0x183c
[   26.545550] softirqs last disabled at (0): [<0000000000000000>] 0x0
[   26.551812] ---[ end trace 20ae984fa860184b ]---

According to the call trace information,it can be located to be
WARN_ON(IS_ERR(c_st)) in the komeda_pipeline_unbound_components function;
Then follow the function.
komeda_pipeline_unbound_components
-> komeda_component_get_state_and_set_user
  -> komeda_pipeline_get_state_and_set_crtc
    -> komeda_pipeline_get_state
      ->drm_atomic_get_private_obj_state
        -> drm_atomic_get_private_obj_state
          -> drm_modeset_lock

komeda_pipeline_unbound_components
-> komeda_component_get_state_and_set_user
  -> komeda_component_get_state
    -> drm_atomic_get_private_obj_state
     -> drm_modeset_lock

ret = drm_modeset_lock(&obj->lock, state->acquire_ctx); if (ret)
return ERR_PTR(ret);
Here it return -EDEADLK.

deal with the deadlock as suggested by [1], using the
function drm_modeset_backoff().
[1] https://docs.kernel.org/gpu/drm-kms.html?highlight=kms#kms-locking

Therefore, handling this problem can be solved
by adding return -EDEADLK back to the drm_modeset_backoff processing flow
in the drm_mode_atomic_ioctl function.

Signed-off-by: baozhu.liu <lucas.liu@siengine.com>
Signed-off-by: menghui.huang <menghui.huang@siengine.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804013117.6870-1-menghui.huang@siengine.com

drm/debugfs: disallow debugfs access when device isn't registered

During device bringup it might be that we can't access the debugfs files.
Return -ENODEV until the registration is completed on access.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230829110115.3442-3-christian.koenig@amd.com

drm/debugfs: drop debugfs_init() for the render and accel node v2

We want to remove per minor debugfs directories. Start by stopping
drivers from adding anything inside of those in the mid layer callback.

v2: drop it for the accel node as well

Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230829110115.3442-2-christian.koenig@amd.com

fbdev/tcx: Use initializer macro for struct fb_ops

Initialize struct fb_ops to the correct default values with the
macro FB_DEFAULT_SBUS_OPS(). Rename the ioctl and mmap callbacks
to use the infix _sbusfb_. This makes them fit the SBUS helpers'
naming pattern. Also make the driver depend on FB_SBUS_HELPERS,
which selects the correct modules.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230806120926.5368-12-tzimmermann@suse.de

fbdev/p9100: Use initializer macro for struct fb_ops

Initialize struct fb_ops to the correct default values with the
macro FB_DEFAULT_SBUS_OPS(). Rename the ioctl and mmap callbacks
to use the infix _sbusfb_. This makes them fit the SBUS helpers'
naming pattern. Also make the driver depend on FB_SBUS_HELPERS,
which selects the correct modules.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230806120926.5368-11-tzimmermann@suse.de

fbdev/leo: Use initializer macro for struct fb_ops

Initialize struct fb_ops to the correct default values with the
macro FB_DEFAULT_SBUS_OPS(). Rename the ioctl and mmap callbacks
to use the infix _sbusfb_. This makes them fit the SBUS helpers'
naming pattern. Also make the driver depend on FB_SBUS_HELPERS,
which selects the correct modules.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230806120926.5368-10-tzimmermann@suse.de

fbdev/ffb: Use initializer macro for struct fb_ops

Initialize struct fb_ops to the correct default values with the
internal __FB_DEFAULT_SBUS_OPS_*() macros. Rename the ioctl and
mmap callbacks to use the infix _sbusfb_. This makes them fit the
SBUS helpers' naming pattern.

It is not possible to use set all defaults via FB_DEAFULT_SBUS_OPS(),
as ffb provides its own implementation of fb_fillrect, fb_copyarea,
and fb_imageblit. Hence we also avoid FB_SBUS_HELPERS, but let the
driver select its dependencies individually instead.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230806120926.5368-9-tzimmermann@suse.de

fbdev/cg6: Use initializer macro for struct fb_ops

Initialize struct fb_ops to the correct default values with the
internal __FB_DEFAULT_SBUS_OPS_*() macros. Rename the ioctl and
mmap callbacks to use the infix _sbusfb_. This makes them fit the
SBUS helpers' naming pattern.

It is not possible to use set all defaults via FB_DEAFULT_SBUS_OPS(),
as cg6 provides its own implementation of fb_fillrect, fb_copyarea,
and fb_imageblit. Hence we also avoid FB_SBUS_HELPERS, but let the
driver select its dependencies individually instead.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230806120926.5368-8-tzimmermann@suse.de

fbdev/cg3: Use initializer macro for struct fb_ops

Initialize struct fb_ops to the correct default values with the
macro FB_DEFAULT_SBUS_OPS(). Rename the ioctl and mmap callbacks
to use the infix _sbusfb_. This makes them fit the SBUS helpers'
naming pattern. Also make the driver depend on FB_SBUS_HELPERS,
which selects the correct modules.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230806120926.5368-7-tzimmermann@suse.de

fbdev/cg14: Use initializer macro for struct fb_ops

Initialize struct fb_ops to the correct default values with the
macro FB_DEFAULT_SBUS_OPS(). Rename the ioctl and mmap callbacks
to use the infix _sbusfb_. This makes them fit the SBUS helpers'
naming pattern. Also make the driver depend on FB_SBUS_HELPERS,
which selects the correct modules.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230806120926.5368-6-tzimmermann@suse.de

fbdev/bw2: Use initializer macro for struct fb_ops

Initialize struct fb_ops to the correct default values with the
macro FB_DEFAULT_SBUS_OPS(). Rename the ioctl and mmap callbacks
to use the infix _sbusfb_. This makes them fit the SBUS helpers'
naming pattern. Also make the driver depend on FB_SBUS_HELPERS,
which selects the correct modules.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230806120926.5368-5-tzimmermann@suse.de

fbdev/sbus: Add initializer macros and Kconfig tokens for SBUS support

Add macros to initialize struct fb_ops for drivers that support
framebuffers on Sparc's SBUS. Also add a Kconfig token that selects
the necessary helpers.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230806120926.5368-4-tzimmermann@suse.de

fbdev/sbus: Forward declare all necessary structures in header

In sbuslib.h, declare all of the header file's structs at the
top. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230806120926.5368-3-tzimmermann@suse.de

fbdev/sbus: Build sbuslib.o if CONFIG_FB_SBUS has been selected

Avoid duplicate listings of sbuslib.o in the Makefile by building
it if CONFIG_FB_SBUS has been selected. Remove the object file from
the various drivers' build rules.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230806120926.5368-2-tzimmermann@suse.de

drm/tests: Add KUnit tests for drm_fb_memcpy()

Insert parameterized test for the drm_fb_memcpy() to ensure correctness
and prevent future regressions. The test case can accept different
formats.

Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230814-gsoc-drm-format-test-v2-v3-6-bd3e9f9bc2fb@riseup.net

drm/tests: Add multi-plane support to conversion_buf_size()

The drm_fb_memcpy() supports multi-plane formats. To fully test it in
the future, add multi-plane support to the conversion_buf_size() helper.

Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230814-gsoc-drm-format-test-v2-v3-5-bd3e9f9bc2fb@riseup.net

drm/tests: Add KUnit tests for drm_fb_build_fourcc_list()

Insert parameterized test for the drm_fb_build_fourcc_list() to ensure
correctness and prevent future regressions.

Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230814-gsoc-drm-format-test-v2-v3-4-bd3e9f9bc2fb@riseup.net

drm/tests: Add KUnit tests for drm_fb_clip_offset()

Insert parameterized test for the drm_fb_clip_offset() to ensure
correctness and prevent future regressions.

Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230814-gsoc-drm-format-test-v2-v3-3-bd3e9f9bc2fb@riseup.net

drm/tests: Add KUnit tests for drm_fb_swab()

Insert parameterized test for the drm_fb_swab() to ensure correctness
and prevent future regressions.

Each expected color has it bytes reversed in order, so xrgb would be
bgrx.

Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230814-gsoc-drm-format-test-v2-v3-2-bd3e9f9bc2fb@riseup.net

drm/tests: Test default pitch fallback

Test the default pitch fallback when NULL is passed as the dst_pitch on
the conversion procedures.

Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230814-gsoc-drm-format-test-v2-v3-1-bd3e9f9bc2fb@riseup.net

drm/repaper: fix -Wvoid-pointer-to-enum-cast warning

When building with clang 18 I see the following warning:
|       drivers/gpu/drm/tiny/repaper.c:952:11: warning: cast to smaller integer
|       type 'enum repaper_model' from 'const void *' [-Wvoid-pointer-to-enum-cast]
|         952 |                 model = (enum repaper_model)match;
|

This is due to the fact that `match` is a void* while `enum repaper_model`
has the size of an int.

Add uintptr_t cast to silence clang warning while also keeping enum cast
for readability and consistency with other `model` assignment just a
few lines below:
|       model = (enum repaper_model)spi_id->driver_data;

Link: https://github.com/ClangBuiltLinux/linux/issues/1910
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230816-void-drivers-gpu-drm-tiny-repaper-v1-1-9d8d10f0d52f@google.com

drm/gma500: Remove unused declarations

These declarations are not implemented now, remove them.

Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817133754.36524-1-yuehaibing@huawei.com

drm/gma500: Fix call trace when psb_gem_mm_init() fails

Because the gma_irq_install() is call after psb_gem_mm_init() function,
when psb_gem_mm_init() fails, the interrupt line haven't been allocated.
Yet the gma_irq_uninstall() is called in the psb_driver_unload() function
without checking if checking the irq is registered or not.

The calltrace is appended as following:

[   20.539253] ioremap memtype_reserve failed -16
[   20.543895] gma500 0000:00:02.0: Failure to map stolen base.
[   20.565049] ------------[ cut here ]------------
[   20.565066] Trying to free already-free IRQ 16
[   20.565087] WARNING: CPU: 1 PID: 381 at kernel/irq/manage.c:1893 free_irq+0x209/0x370
[   20.565316] CPU: 1 PID: 381 Comm: systemd-udevd Tainted: G         C         6.5.0-rc1+ #368
[   20.565329] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./IMB-140D Plus, BIOS P1.10 11/18/2013
[   20.565338] RIP: 0010:free_irq+0x209/0x370
[   20.565357] Code: 41 5d 41 5e 41 5f 5d 31 d2 89 d1 89 d6 89 d7 41 89 d1 c3 cc cc cc cc 8b 75 d0 48 c7 c7 e0 77 12 9f 4c 89 4d c8 e8 57 fe f4 ff <0f> 0b 48 8b 75 c8 4c 89 f7 e8 29 f3 f1 00 49 8b 47 40 48 8b 40 78
[   20.565369] RSP: 0018:ffffae3b40733808 EFLAGS: 00010046
[   20.565382] RAX: 0000000000000000 RBX: ffff9f8082bfe000 RCX: 0000000000000000
[   20.565390] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[   20.565397] RBP: ffffae3b40733840 R08: 0000000000000000 R09: 0000000000000000
[   20.565405] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9f80871c3100
[   20.565413] R13: ffff9f80835d3360 R14: ffff9f80835d32a4 R15: ffff9f80835d3200
[   20.565424] FS:  00007f13d36458c0(0000) GS:ffff9f8138880000(0000) knlGS:0000000000000000
[   20.565434] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   20.565441] CR2: 00007f0d046f3f20 CR3: 0000000006c8c000 CR4: 00000000000006e0
[   20.565450] Call Trace:
[   20.565458]  <TASK>
[   20.565470]  ? show_regs+0x72/0x90
[   20.565488]  ? free_irq+0x209/0x370
[   20.565504]  ? __warn+0x8d/0x160
[   20.565520]  ? free_irq+0x209/0x370
[   20.565536]  ? report_bug+0x1bb/0x1d0
[   20.565555]  ? handle_bug+0x46/0x90
[   20.565572]  ? exc_invalid_op+0x19/0x80
[   20.565587]  ? asm_exc_invalid_op+0x1b/0x20
[   20.565607]  ? free_irq+0x209/0x370
[   20.565625]  ? free_irq+0x209/0x370
[   20.565644]  gma_irq_uninstall+0x15b/0x1e0 [gma500_gfx]
[   20.565728]  psb_driver_unload+0x27/0x190 [gma500_gfx]
[   20.565800]  psb_pci_probe+0x5d2/0x790 [gma500_gfx]
[   20.565873]  local_pci_probe+0x48/0xb0
[   20.565892]  pci_device_probe+0xc8/0x280
[   20.565912]  really_probe+0x1d2/0x440
[   20.565929]  __driver_probe_device+0x8a/0x190
[   20.565944]  driver_probe_device+0x23/0xd0
[   20.565957]  __driver_attach+0x10f/0x220
[   20.565971]  ? __pfx___driver_attach+0x10/0x10
[   20.565984]  bus_for_each_dev+0x7a/0xe0
[   20.566002]  driver_attach+0x1e/0x30
[   20.566014]  bus_add_driver+0x127/0x240
[   20.566029]  driver_register+0x64/0x140
[   20.566043]  ? __pfx_psb_init+0x10/0x10 [gma500_gfx]
[   20.566111]  __pci_register_driver+0x68/0x80
[   20.566128]  psb_init+0x2c/0xff0 [gma500_gfx]
[   20.566194]  do_one_initcall+0x46/0x330
[   20.566214]  ? kmalloc_trace+0x2a/0xb0
[   20.566233]  do_init_module+0x6a/0x270
[   20.566250]  load_module+0x207f/0x23a0
[   20.566278]  init_module_from_file+0x9c/0xf0
[   20.566293]  ? init_module_from_file+0x9c/0xf0
[   20.566315]  idempotent_init_module+0x184/0x240
[   20.566335]  __x64_sys_finit_module+0x64/0xd0
[   20.566352]  do_syscall_64+0x59/0x90
[   20.566366]  ? ksys_mmap_pgoff+0x123/0x270
[   20.566378]  ? __secure_computing+0x9b/0x110
[   20.566392]  ? exit_to_user_mode_prepare+0x39/0x190
[   20.566406]  ? syscall_exit_to_user_mode+0x2a/0x50
[   20.566420]  ? do_syscall_64+0x69/0x90
[   20.566433]  ? do_syscall_64+0x69/0x90
[   20.566445]  ? do_syscall_64+0x69/0x90
[   20.566458]  entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[   20.566472] RIP: 0033:0x7f13d351ea3d
[   20.566485] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d c3 a3 0f 00 f7 d8 64 89 01 48
[   20.566496] RSP: 002b:00007ffe566c1fd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[   20.566510] RAX: ffffffffffffffda RBX: 000055e66806eec0 RCX: 00007f13d351ea3d
[   20.566519] RDX: 0000000000000000 RSI: 00007f13d36d9441 RDI: 0000000000000010
[   20.566527] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000002
[   20.566535] R10: 0000000000000010 R11: 0000000000000246 R12: 00007f13d36d9441
[   20.566543] R13: 000055e6681108c0 R14: 000055e66805ba70 R15: 000055e66819a9c0
[   20.566559]  </TASK>
[   20.566566] ---[ end trace 0000000000000000 ]---

Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727185855.713318-1-suijingfeng@loongson.cn

drm/gma500: remove duplicate macro definitions

Remove identical duplicate block of macro definitions in
drivers/gpu/drm/gma500/psb_drv.h.

Signed-off-by: Jorge Maidana <jorgem.linux@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230725173107.9593-1-jorgem.linux@gmail.com

drm/nouveau: uapi: don't pass NO_PREFETCH flag implicitly

Currently, NO_PREFETCH is passed implicitly through
drm_nouveau_gem_pushbuf_push::length and drm_nouveau_exec_push::va_len.

Since this is a direct representation of how the HW is programmed it
isn't really future proof for a uAPI. Hence, fix this up for the new
uAPI and split up the va_len field of struct drm_nouveau_exec_push,
such that we keep 32bit for va_len and 32bit for flags.

For drm_nouveau_gem_pushbuf_push::length at least provide
NOUVEAU_GEM_PUSHBUF_NO_PREFETCH to indicate the bit shift.

While at it, fix up nv50_dma_push() as well, such that the caller
doesn't need to encode the NO_PREFETCH flag into the length parameter.

Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230823181746.3446-1-dakr@redhat.com

drm/nouveau: uvmm: fix unset region pointer on remap

Transfer the region pointer of a uvma to the new uvma(s) on re-map to
prevent potential shader faults when the re-mapped uvma(s) are unmapped.

Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230820222920.2344-1-dakr@redhat.com

drm/nouveau: sched: avoid job races between entities

If a sched job depends on a dma-fence from a job from the same GPU
scheduler instance, but a different scheduler entity, the GPU scheduler
does only wait for the particular job to be scheduled, rather than for
the job to fully complete. This is due to the GPU scheduler assuming
that there is a scheduler instance per ring. However, the current
implementation, in order to avoid arbitrary amounts of kthreads, has a
single scheduler instance while scheduler entities represent rings.

As a workaround, set the DRM_SCHED_FENCE_DONT_PIPELINE for all
out-fences in order to force the scheduler to wait for full job
completion for dependent jobs from different entities and same scheduler
instance.

There is some work in progress [1] to address the issues of firmware
schedulers; once it is in-tree the scheduler topology in Nouveau should
be re-worked accordingly.

[1] https://lore.kernel.org/dri-devel/20230801205103.627779-1-matthew.brost@intel.com/

Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collaboralcom>
Link: https://patchwork.freedesktop.org/patch/msgid/20230811010632.2473-1-dakr@redhat.com

doc: uapi: Add document describing dma-buf semantics

Since there's a lot of confusion around this, document both the rules
and the best practices around negotiating, allocating, importing, and
using buffers when crossing context/process/device/subsystem boundaries.

This ties up all of dma-buf, formats and modifiers, and their usage.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803154908.105124-4-daniels@collabora.com

doc: dma-buf: Rewrite intro section a little

Make it a little bit more clear what's going on and fix some formatting.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803154908.105124-3-daniels@collabora.com

drm/panfrost: Do not check for 0 return after calling platform_get_irq_byname()

It is not possible for platform_get_irq_byname() to return 0.
Use the return value from platform_get_irq_byname().

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803040401.3067484-2-ruanjinjie@huawei.com

drm/bridge: Fix kernel-doc typo in desc of output_bus_cfg in drm_bridge_state

There's an obvious copy-paste error in the description of
output_bus_cfg. Fix it.

Fixes: f32df58acc68 ("drm/bridge: Add the necessary bits to support bus format negotiation")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817094808.1.I41b04c3a8305c9f1c17af886c327941c5136ca3b@changeid

drm/panel: Add driver for JDI LPM102A188A

The JDI LPM102A188A is a 2560x1800 IPS panel found in the Google Pixel C.
This driver is based on the downstream GPLv2 driver released by Google
written by Sean Paul [1], which was then adapted to the newer kernel APIs.

[1]: https://android.googlesource.com/kernel/tegra/+/refs/heads/android-tegra-dragon-3.18-oreo/drivers/gpu/drm/panel/panel-jdi-lpm102a188a.c

Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230807133307.27456-3-diogo.ivo@tecnico.ulisboa.pt

dt-bindings: display: Add bindings for JDI LPM102A188A

The LPM102A188A is a 10.2" 2560x1800 IPS panel found in
the Google Pixel C.

Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230807133307.27456-2-diogo.ivo@tecnico.ulisboa.pt

drm/panel: JDI LT070ME05000 simplify with dev_err_probe()

Use the dev_err_probe() helper to simplify error handling during probe.
This also handle scenario, when EDEFER is returned and useless error is printed.

Fixes error:
panel-jdi-lt070me05000 4700000.dsi.0: cannot get enable-gpio -517

Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230812185239.378582-1-david@ixit.cz

drm/panel: JDI LT070ME05000 drop broken link

Link is no longer functional and web.archive.org doesn't provide PDF
with detail information.

Some informations can be found from web.archive.org here:
https://web.archive.org/web/20170629205602/http://panelone.net/en/7-0-inch/JDI_LT070ME05000_7.0_inch-datasheet

Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230812183404.374718-1-david@ixit.cz