Nikolay Borisov [Mon, 22 Nov 2021 15:16:46 +0000 (17:16 +0200)]
btrfs: get next entry in tree_search_offset before doing checks
This is a small optimisation since the currently 'entry' is already
checked in the if () {} else if {} construct above the loop. In essence
the first iteration of the final while loop is redundant. To eliminate
this extra check simply get the next entry at the beginning of the loop.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Thu, 18 Nov 2021 21:33:16 +0000 (16:33 -0500)]
btrfs: add self test for bytes_index free space cache
I noticed a few corner cases when looking at my bytes_index patch for
obvious bugs, so add a bunch of tests to validate proper behavior of the
bytes_index tree. A couple of basic tests to make sure it puts things
in the correct order, and then more complicated tests to make sure it
re-arranges bitmap entries properly and does the right thing when we try
to make allocations.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Thu, 18 Nov 2021 21:33:15 +0000 (16:33 -0500)]
btrfs: index free space entries on size
Currently we index free space on offset only, because usually we have a
hint from the allocator that we want to honor for locality reasons.
However if we fail to use this hint we have to go back to a brute force
search through the free space entries to find a large enough extent.
With sufficiently fragmented free space this becomes quite expensive, as
we have to linearly search all of the free space entries to find if we
have a part that's long enough.
To fix this add a cached rb tree to index based on free space entry
bytes. This will allow us to quickly look up the largest chunk in the
free space tree for this block group, and stop searching once we've
found an entry that is too small to satisfy our allocation. We simply
choose to use this tree if we're searching from the beginning of the
block group, as we know we do not care about locality at that point.
I wrote an allocator test that creates a 10TiB ram backed null block
device and then fallocates random files until the file system is full.
I think go through and delete all of the odd files. Then I spawn 8
threads that fallocate 64MiB files (1/2 our extent size cap) until the
file system is full again. I use bcc's funclatency to measure the
latency of find_free_extent. The baseline results are
nsecs : count distribution
0 -> 1 : 0 | |
2 -> 3 : 0 | |
4 -> 7 : 0 | |
8 -> 15 : 0 | |
16 -> 31 : 0 | |
32 -> 63 : 0 | |
64 -> 127 : 0 | |
128 -> 255 : 0 | |
256 -> 511 : 10356 |**** |
512 -> 1023 : 58242 |************************* |
1024 -> 2047 : 74418 |******************************** |
2048 -> 4095 : 90393 |****************************************|
4096 -> 8191 : 79119 |*********************************** |
8192 -> 16383 : 35614 |*************** |
16384 -> 32767 : 13418 |***** |
32768 -> 65535 : 12811 |***** |
65536 -> 131071 : 17090 |******* |
131072 -> 262143 : 26465 |*********** |
262144 -> 524287 : 40179 |***************** |
524288 ->
1048575 : 55469 |************************ |
1048576 ->
2097151 : 48807 |********************* |
2097152 ->
4194303 : 26744 |*********** |
4194304 ->
8388607 : 35351 |*************** |
8388608 ->
16777215 : 13918 |****** |
16777216 ->
33554431 : 21 | |
avg = 908079 nsecs, total:
580889071441 nsecs, count: 639690
And the patch results are
nsecs : count distribution
0 -> 1 : 0 | |
2 -> 3 : 0 | |
4 -> 7 : 0 | |
8 -> 15 : 0 | |
16 -> 31 : 0 | |
32 -> 63 : 0 | |
64 -> 127 : 0 | |
128 -> 255 : 0 | |
256 -> 511 : 6883 |** |
512 -> 1023 : 54346 |********************* |
1024 -> 2047 : 79170 |******************************** |
2048 -> 4095 : 98890 |****************************************|
4096 -> 8191 : 81911 |********************************* |
8192 -> 16383 : 27075 |********** |
16384 -> 32767 : 14668 |***** |
32768 -> 65535 : 13251 |***** |
65536 -> 131071 : 15340 |****** |
131072 -> 262143 : 26715 |********** |
262144 -> 524287 : 43274 |***************** |
524288 ->
1048575 : 53870 |********************* |
1048576 ->
2097151 : 55368 |********************** |
2097152 ->
4194303 : 41036 |**************** |
4194304 ->
8388607 : 24927 |********** |
8388608 ->
16777215 : 33 | |
16777216 ->
33554431 : 9 | |
avg = 623599 nsecs, total:
397259314759 nsecs, count: 637042
There's a little variation in the amount of calls done because of timing
of the threads with metadata requirements, but the avg, total, and
count's are relatively consistent between runs (usually within 2-5% of
each other). As you can see here we have around a 30% decrease in
average latency with a 30% decrease in overall time spent in
find_free_extent.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Thu, 18 Nov 2021 21:33:14 +0000 (16:33 -0500)]
btrfs: only use ->max_extent_size if it is set in the bitmap
While adding self tests for my space index change I was hitting a
problem where the space indexed tree wasn't returning the expected
->max_extent_size. This is because we will skip searching any entry
that doesn't have ->bytes >= the amount of bytes we want. However we'll
still set the max_extent_size based on that entry. The problem is if we
don't search the bitmap we won't have ->max_extent_size set properly, so
we can't really trust it.
This doesn't really result in a problem per-se, it can just result in us
not finding contiguous area that may exist. Fix the max_extent_size
helper to return ->bytes if ->max_extent_size isn't set, and add a big
comment explaining why we're doing this.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Fri, 12 Nov 2021 05:33:14 +0000 (13:33 +0800)]
btrfs: remove unnecessary @nr_written parameters
We use @nr_written to record how many pages have been started by
btrfs_run_delalloc_range().
Currently there are only two cases that would populate @nr_written:
- Inline extent creation
- Compressed write
But both cases will also set @page_started to one.
In fact, in writepage_delalloc() we have the following code, showing
that @nr_written is really only utilized for above two cases:
/* did the fill delalloc function already unlock and start
* the IO?
*/
if (page_started) {
/*
* we've unlocked the page, so we can't update
* the mapping's writeback index, just update
* nr_to_write.
*/
wbc->nr_to_write -= nr_written;
return 1;
}
But for such cases, writepage_delalloc() will return 1, and exit
__extent_writepage() without going through __extent_writepage_io().
Thus this means, inside __extent_writepage_io(), we always get
@nr_written as 0.
So this patch is going to remove the unnecessary parameter from the
following functions:
- writepage_delalloc()
As @nr_written passed in is always the initial value 0.
Although inside that function, we still need a local @nr_written
to update wbc->nr_to_write.
- __extent_writepage_io()
As explained above, @nr_written passed in can only be 0.
This also means we can remove one update_nr_written() call.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Tue, 9 Nov 2021 15:12:07 +0000 (10:12 -0500)]
btrfs: change root to fs_info for btrfs_reserve_metadata_bytes
We used to need the root for btrfs_reserve_metadata_bytes to check the
orphan cleanup state, but we no longer need that, we simply need the
fs_info. Change btrfs_reserve_metadata_bytes() to use the fs_info, and
change both btrfs_block_rsv_refill() and btrfs_block_rsv_add() to do the
same as they simply call btrfs_reserve_metadata_bytes() and then
manipulate the block_rsv that is being used.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Tue, 9 Nov 2021 15:12:06 +0000 (10:12 -0500)]
btrfs: get rid of root->orphan_cleanup_state
Now that we don't care about the stage of the orphan_cleanup_state,
simply replace it with a bit on ->state to make sure we don't call the
orphan cleanup every time we wander into this root.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Tue, 9 Nov 2021 15:12:05 +0000 (10:12 -0500)]
btrfs: remove global rsv stealing logic for orphan cleanup
This is very old code before we were stealing from the global reserve
during evict. We have proper ways to steal from the global reserve
while we're evicting, so rip out this code as it's no longer necessary.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Tue, 9 Nov 2021 15:12:04 +0000 (10:12 -0500)]
btrfs: make BTRFS_RESERVE_FLUSH_EVICT use the global rsv stealing code
I forgot to convert this over when I introduced the global reserve
stealing code to the space flushing code. Evict was simply trying to
make its reservation and then if it failed it would steal from the
global rsv, which is racey because it's outside of the normal ticketing
code.
Fix this by setting ticket->steal if we are BTRFS_RESERVE_FLUSH_EVICT,
and then make the priority flushing path do the steal for us.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Tue, 9 Nov 2021 15:12:03 +0000 (10:12 -0500)]
btrfs: check ticket->steal in steal_from_global_block_rsv
We're going to use this helper in the priority flushing loop, move this
check into the helper to simplify the logic.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Tue, 9 Nov 2021 15:12:02 +0000 (10:12 -0500)]
btrfs: check for priority ticket granting before flushing
Since we're dropping locks before we enter the priority flushing loops
we could have had our ticket granted before we got the space_info->lock.
So add this check to avoid doing some extra flushing in the priority
flushing cases.
The case in priority_reclaim_metadata_space is an optimization. Think
we came in to reserve, we didn't have the space, we added our ticket to
the list. But at the same time somebody was waiting on the space_info
lock to add space and do btrfs_try_granting_ticket(), so we drop the
lock, get satisfied, come in to do our loop, and we have been
satisfied.
This is the priority reclaim path, so to_reclaim could be !0 still
because we may have only satisfied the priority tickets and still left
non priority tickets on the list. We would then have to_reclaim but
->bytes == 0.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ add note about the optimization ]
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Tue, 9 Nov 2021 15:12:01 +0000 (10:12 -0500)]
btrfs: handle priority ticket failures in their respective helpers
Currently the error case for the priority tickets is handled where we
deal with all of the tickets, priority and non-priority. This is OK in
general, but it makes for some awkward locking. We take and drop the
space_info->lock back to back because of these different types of
tickets.
Rework the code to handle priority ticket failures in their respective
helpers. This allows us to be less wonky with our space_info->lock
usage, and means that the main handler simply has to check
ticket->error, as the ticket is guaranteed to be off any list and
completely handled by the time it exits one of the handlers.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Naohiro Aota [Thu, 11 Nov 2021 05:14:38 +0000 (14:14 +0900)]
btrfs: zoned: cache reported zone during mount
When mounting a device, we are reporting the zones twice: once for
checking the zone attributes in btrfs_get_dev_zone_info and once for
loading block groups' zone info in
btrfs_load_block_group_zone_info(). With a lot of block groups, that
leads to a lot of REPORT ZONE commands and slows down the mount
process.
This patch introduces a zone info cache in struct
btrfs_zoned_device_info. The cache is populated while in
btrfs_get_dev_zone_info() and used for
btrfs_load_block_group_zone_info() to reduce the number of REPORT ZONE
commands. The zone cache is then released after loading the block
groups, as it will not be much effective during the run time.
Benchmark: Mount an HDD with 57,007 block groups
Before patch: 171.368 seconds
After patch: 64.064 seconds
While it still takes a minute due to the slowness of loading all the
block groups, the patch reduces the mount time by 1/3.
Link: https://lore.kernel.org/linux-btrfs/CAHQ7scUiLtcTqZOMMY5kbWUBOhGRwKo6J6wYPT5WY+C=cD49nQ@mail.gmail.com/
Fixes:
5b316468983d ("btrfs: get zone information of zoned block devices")
CC: stable@vger.kernel.org
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Su Yue [Wed, 10 Nov 2021 06:42:17 +0000 (14:42 +0800)]
btrfs: remove unused parameter fs_devices from btrfs_init_workqueues
Since commit
ba8a9d079543 ("Btrfs: delete the entire async bio submission
framework") removed submit workqueues, the parameter fs_devices is not used
anymore.
Remove it, no functional changes.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Su Yue <l@damenly.su>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Wed, 10 Nov 2021 10:05:21 +0000 (10:05 +0000)]
btrfs: reduce the scope of the tree log mutex during transaction commit
In the transaction commit path we are acquiring the tree log mutex too
early and we have a stale comment because:
1) It mentions a function named btrfs_commit_tree_roots(), which does not
exists anymore, it was the old name of commit_cowonly_roots(), renamed
a very long time ago by commit
5d4f98a28c7d33 ("Btrfs: Mixed back
reference (FORWARD ROLLING FORMAT CHANGE)"));
2) It mentions that we need to acquire the tree log mutex at that point
to ensure we have no running log writers. That is not correct anymore,
for many years at least, since we are guaranteed that we do not have
any log writers at that point simply because we have set the state of
the transaction to TRANS_STATE_COMMIT_DOING and have waited for all
writers to complete - meaning no one can log until we change the state
of the transaction to TRANS_STATE_UNBLOCKED. Any attempts to join the
transaction or start a new one will block until we do that state
transition;
3) The comment mentions a "trans mutex" which doesn't exists since 2011,
commit
a4abeea41adf ("Btrfs: kill trans_mutex") removed it;
4) The current use of the tree log mutex is to ensure proper serialization
of super block writes - if someone started a new transaction and uses it
for logging, it will wait for the previous transaction to write its
super block before writing the super block when attempting to sync the
log.
So acquire the tree log mutex only when it's absolutely needed, before
setting the transaction state to TRANS_STATE_UNBLOCKED, fix and move the
stale comment, add some assertions and new comments where appropriate.
Also, this has no effect on concurrency or performance, since the new
start of the critical section is still when the transaction is in the
state TRANS_STATE_COMMIT_DOING.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Tue, 9 Nov 2021 09:51:58 +0000 (17:51 +0800)]
btrfs: consolidate device_list_mutex in prepare_sprout to its parent
btrfs_prepare_sprout() splices seed devices into its own struct fs_devices,
so that its parent function btrfs_init_new_device() can add the new sprout
device to fs_info->fs_devices.
Both btrfs_prepare_sprout() and btrfs_init_new_device() need
device_list_mutex. But they are holding it separately, thus create a
small race window. Close it and hold device_list_mutex across both
functions btrfs_init_new_device() and btrfs_prepare_sprout().
Split btrfs_prepare_sprout() into btrfs_init_sprout() and
btrfs_setup_sprout(). This split is essential because device_list_mutex
must not be held for allocations in btrfs_init_sprout() but must be held
for btrfs_setup_sprout(). So now a common device_list_mutex can be used
between btrfs_init_new_device() and btrfs_setup_sprout().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Tue, 21 Sep 2021 04:33:23 +0000 (12:33 +0800)]
btrfs: switch seeding_dev in init_new_device to bool
Declare int seeding_dev as a bool. Also, move its declaration a line
below to adjust packing.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Omar Sandoval [Fri, 5 Nov 2021 00:00:13 +0000 (17:00 -0700)]
btrfs: send: remove unused type parameter to iterate_inode_ref_t
Again, I don't think this was ever used since iterate_dir_item() is only
used for xattrs. No functional change.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Omar Sandoval [Fri, 5 Nov 2021 00:00:12 +0000 (17:00 -0700)]
btrfs: send: remove unused found_type parameter to lookup_dir_item_inode()
As far as I can tell, this was never used. No functional change.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Thu, 21 Oct 2021 18:58:37 +0000 (14:58 -0400)]
btrfs: rename btrfs_item_end_nr to btrfs_item_data_end
The name btrfs_item_end_nr() is a bit of a misnomer, as it's actually
the offset of the end of the data the item points to. In fact all of
the helpers that we use btrfs_item_end_nr() use data in their name, like
BTRFS_LEAF_DATA_SIZE() and leaf_data(). Rename to btrfs_item_data_end()
to make it clear what this helper is giving us.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Thu, 21 Oct 2021 18:58:36 +0000 (14:58 -0400)]
btrfs: remove the btrfs_item_end() helper
We're only using btrfs_item_end() from btrfs_item_end_nr(), so this can
be collapsed.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Thu, 21 Oct 2021 18:58:35 +0000 (14:58 -0400)]
btrfs: drop the _nr from the item helpers
Now that all call sites are using the slot number to modify item values,
rename the SETGET helpers to raw_item_*(), and then rework the _nr()
helpers to be the btrfs_item_*() btrfs_set_item_*() helpers, and then
rename all of the callers to the new helpers.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Thu, 21 Oct 2021 18:58:34 +0000 (14:58 -0400)]
btrfs: introduce item_nr token variant helpers
The last remaining place where we have the pattern of
item = btrfs_item_nr(slot)
<do something with the item>
are the token helpers. Handle this by introducing token helpers that
will do the btrfs_item_nr() work inside of the helper itself, and then
convert all users of the btrfs_item token helpers to the new _nr()
variants.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Thu, 21 Oct 2021 18:58:33 +0000 (14:58 -0400)]
btrfs: make btrfs_file_extent_inline_item_len take a slot
Instead of getting the btrfs_item for this, simply pass in the slot of
the item and then use the btrfs_item_size_nr() helper inside of
btrfs_file_extent_inline_item_len().
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Thu, 21 Oct 2021 18:58:32 +0000 (14:58 -0400)]
btrfs: add btrfs_set_item_*_nr() helpers
We have the pattern of
item = btrfs_item_nr(slot);
btrfs_set_item_*(leaf, item);
in a bunch of places in our code. Fix this by adding
btrfs_set_item_*_nr() helpers which will do the appropriate work, and
replace those calls with
btrfs_set_item_*_nr(leaf, slot);
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Thu, 21 Oct 2021 18:58:31 +0000 (14:58 -0400)]
btrfs: use btrfs_item_size_nr/btrfs_item_offset_nr everywhere
We have this pattern in a lot of places
item = btrfs_item_nr(slot);
btrfs_item_size(leaf, item);
when we could simply use
btrfs_item_size(leaf, slot);
Fix all callers of btrfs_item_size() and btrfs_item_offset() to use the
_nr variation of the helpers.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Mon, 25 Oct 2021 16:31:54 +0000 (17:31 +0100)]
btrfs: remove no longer needed logic for replaying directory deletes
Now that we log only dir index keys when logging a directory, we no longer
need to deal with dir item keys in the log replay code for replaying
directory deletes. This is also true for the case when we replay a log
tree created by a kernel that still logs dir items.
So remove the remaining code of the replay of directory deletes algorithm
that deals with dir item keys.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Mon, 25 Oct 2021 16:31:53 +0000 (17:31 +0100)]
btrfs: only copy dir index keys when logging a directory
Currently, when logging a directory, we copy both dir items and dir index
items from the fs/subvolume tree to the log tree. Both items have exactly
the same data (same struct btrfs_dir_item), the difference lies in the key
values, where a dir index key contains the index number of a directory
entry while the dir item key does not, as it's used for doing fast lookups
of an entry by name, while the former is used for sorting entries when
listing a directory.
We can exploit that and log only the dir index items, since they contain
all the information needed to correctly add, replace and delete directory
entries when replaying a log tree. Logging only the dir index items is
also backward and forward compatible: an unpatched kernel (without this
change) can correctly replay a log tree generated by a patched kernel
(with this patch), and a patched kernel can correctly replay a log tree
generated by an unpatched kernel.
The backward compatibility is ensured because:
1) For inserting a new dentry: a dentry is only inserted when we find a
new dir index key - we can only insert if we know the dir index offset,
which is encoded in the dir index key's offset;
2) For deleting dentries: during log replay, before adding or replacing
dentries, we first replay dentry deletions. Whenever we find a dir item
key or a dir index key in the subvolume/fs tree that is not logged in
a range for which the log tree is authoritative, we do the unlink of
the dentry, which removes both the existing dir item key and the dir
index key. Therefore logging just dir index keys is enough to ensure
dentry deletions are correctly replayed;
3) For dentry replacements: they work when we log only dir index keys
and this is mostly due to a combination of 1) and 2). If we replace a
dentry with name "foobar" to point from inode A to inode B, then we
know the dir index key for the new dentry is different from the old
one, as it has an index number (key offset) larger than the old one.
This results in replaying a deletion, through replay_dir_deletes(),
that causes the old dentry to be removed, both the dir item key and
the dir index key, as mentioned at 2). Then when processing the new
dir index key, we add the new dentry, adding both a new dir item key
and a new index key pointing to inode B, as stated in 1).
The forward compatibility, the ability for a patched kernel to replay a
log created by an older, unpatched kernel, comes from the changes required
for making sure we are able to replay a log that only contains dir index
keys - we simply ignore every dir item key we find.
So modify directory logging to log only dir index items, and modify the
log replay process to ignore dir item keys, from log trees created by an
unpatched kernel, and process only with dir index keys. This reduces the
amount of logged metadata by about half, and therefore the time spent
logging or fsyncing large directories (less CPU time and less IO).
The following test script was used to measure this change:
#!/bin/bash
DEV=/dev/nvme0n1
MNT=/mnt/nvme0n1
NUM_NEW_FILES=
1000000
NUM_FILE_DELETES=10000
mkfs.btrfs -f $DEV
mount -o ssd $DEV $MNT
mkdir $MNT/testdir
for ((i = 1; i <= $NUM_NEW_FILES; i++)); do
echo -n > $MNT/testdir/file_$i
done
start=$(date +%s%N)
xfs_io -c "fsync" $MNT/testdir
end=$(date +%s%N)
dur=$(( (end - start) /
1000000 ))
echo "dir fsync took $dur ms after adding $NUM_NEW_FILES files"
# sync to force transaction commit and wipeout the log.
sync
del_inc=$(( $NUM_NEW_FILES / $NUM_FILE_DELETES ))
for ((i = 1; i <= $NUM_NEW_FILES; i += $del_inc)); do
rm -f $MNT/testdir/file_$i
done
start=$(date +%s%N)
xfs_io -c "fsync" $MNT/testdir
end=$(date +%s%N)
dur=$(( (end - start) /
1000000 ))
echo "dir fsync took $dur ms after deleting $NUM_FILE_DELETES files"
echo
umount $MNT
The tests were run on a physical machine, with a non-debug kernel (Debian's
default kernel config), for different values of $NUM_NEW_FILES and
$NUM_FILE_DELETES, and the results were the following:
** Before patch, NUM_NEW_FILES = 1 000 000, NUM_DELETE_FILES = 10 000 **
dir fsync took 8412 ms after adding
1000000 files
dir fsync took 500 ms after deleting 10000 files
** After patch, NUM_NEW_FILES = 1 000 000, NUM_DELETE_FILES = 10 000 **
dir fsync took 4252 ms after adding
1000000 files (-49.5%)
dir fsync took 269 ms after deleting 10000 files (-46.2%)
** Before patch, NUM_NEW_FILES = 100 000, NUM_DELETE_FILES = 1 000 **
dir fsync took 745 ms after adding 100000 files
dir fsync took 59 ms after deleting 1000 files
** After patch, NUM_NEW_FILES = 100 000, NUM_DELETE_FILES = 1 000 **
dir fsync took 404 ms after adding 100000 files (-45.8%)
dir fsync took 31 ms after deleting 1000 files (-47.5%)
** Before patch, NUM_NEW_FILES = 10 000, NUM_DELETE_FILES = 1 000 **
dir fsync took 67 ms after adding 10000 files
dir fsync took 9 ms after deleting 1000 files
** After patch, NUM_NEW_FILES = 10 000, NUM_DELETE_FILES = 1 000 **
dir fsync took 36 ms after adding 10000 files (-46.3%)
dir fsync took 5 ms after deleting 1000 files (-44.4%)
** Before patch, NUM_NEW_FILES = 1 000, NUM_DELETE_FILES = 100 **
dir fsync took 9 ms after adding 1000 files
dir fsync took 4 ms after deleting 100 files
** After patch, NUM_NEW_FILES = 1 000, NUM_DELETE_FILES = 100 **
dir fsync took 7 ms after adding 1000 files (-22.2%)
dir fsync took 3 ms after deleting 100 files (-25.0%)
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 14 Oct 2021 07:03:11 +0000 (10:03 +0300)]
btrfs: remove spurious unlock/lock of unused_bgs_lock
Since both unused block groups and reclaim bgs lists are protected by
unused_bgs_lock then free them in the same critical section without
doing an extra unlock/lock pair.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Wed, 27 Oct 2021 17:30:25 +0000 (18:30 +0100)]
btrfs: fix deadlock between quota enable and other quota operations
When enabling quotas, we attempt to commit a transaction while holding the
mutex fs_info->qgroup_ioctl_lock. This can result on a deadlock with other
quota operations such as:
- qgroup creation and deletion, ioctl BTRFS_IOC_QGROUP_CREATE;
- adding and removing qgroup relations, ioctl BTRFS_IOC_QGROUP_ASSIGN.
This is because these operations join a transaction and after that they
attempt to lock the mutex fs_info->qgroup_ioctl_lock. Acquiring that mutex
after joining or starting a transaction is a pattern followed everywhere
in qgroups, so the quota enablement operation is the one at fault here,
and should not commit a transaction while holding that mutex.
Fix this by making the transaction commit while not holding the mutex.
We are safe from two concurrent tasks trying to enable quotas because
we are serialized by the rw semaphore fs_info->subvol_sem at
btrfs_ioctl_quota_ctl(), which is the only call site for enabling
quotas.
When this deadlock happens, it produces a trace like the following:
INFO: task syz-executor:25604 blocked for more than 143 seconds.
Not tainted 5.15.0-rc6 #4
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor state:D stack:24800 pid:25604 ppid: 24873 flags:0x00004004
Call Trace:
context_switch kernel/sched/core.c:4940 [inline]
__schedule+0xcd9/0x2530 kernel/sched/core.c:6287
schedule+0xd3/0x270 kernel/sched/core.c:6366
btrfs_commit_transaction+0x994/0x2e90 fs/btrfs/transaction.c:2201
btrfs_quota_enable+0x95c/0x1790 fs/btrfs/qgroup.c:1120
btrfs_ioctl_quota_ctl fs/btrfs/ioctl.c:4229 [inline]
btrfs_ioctl+0x637e/0x7b70 fs/btrfs/ioctl.c:5010
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:874 [inline]
__se_sys_ioctl fs/ioctl.c:860 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f86920b2c4d
RSP: 002b:
00007f868f61ac58 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
RAX:
ffffffffffffffda RBX:
00007f86921d90a0 RCX:
00007f86920b2c4d
RDX:
0000000020005e40 RSI:
00000000c0109428 RDI:
0000000000000008
RBP:
00007f869212bd80 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00007f86921d90a0
R13:
00007fff6d233e4f R14:
00007fff6d233ff0 R15:
00007f868f61adc0
INFO: task syz-executor:25628 blocked for more than 143 seconds.
Not tainted 5.15.0-rc6 #4
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor state:D stack:29080 pid:25628 ppid: 24873 flags:0x00004004
Call Trace:
context_switch kernel/sched/core.c:4940 [inline]
__schedule+0xcd9/0x2530 kernel/sched/core.c:6287
schedule+0xd3/0x270 kernel/sched/core.c:6366
schedule_preempt_disabled+0xf/0x20 kernel/sched/core.c:6425
__mutex_lock_common kernel/locking/mutex.c:669 [inline]
__mutex_lock+0xc96/0x1680 kernel/locking/mutex.c:729
btrfs_remove_qgroup+0xb7/0x7d0 fs/btrfs/qgroup.c:1548
btrfs_ioctl_qgroup_create fs/btrfs/ioctl.c:4333 [inline]
btrfs_ioctl+0x683c/0x7b70 fs/btrfs/ioctl.c:5014
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:874 [inline]
__se_sys_ioctl fs/ioctl.c:860 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Reported-by: Hao Sun <sunhao.th@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CACkBjsZQF19bQ1C6=yetF3BvL10OSORpFUcWXTP6HErshDB4dQ@mail.gmail.com/
Fixes:
340f1aa27f36 ("btrfs: qgroups: Move transaction management inside btrfs_quota_enable/disable")
CC: stable@vger.kernel.org # 4.19
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 28 Oct 2021 15:03:41 +0000 (16:03 +0100)]
btrfs: fix ENOSPC failure when attempting direct IO write into NOCOW range
When doing a direct IO write against a file range that either has
preallocated extents in that range or has regular extents and the file
has the NOCOW attribute set, the write fails with -ENOSPC when all of
the following conditions are met:
1) There are no data blocks groups with enough free space matching
the size of the write;
2) There's not enough unallocated space for allocating a new data block
group;
3) The extents in the target file range are not shared, neither through
snapshots nor through reflinks.
This is wrong because a NOCOW write can be done in such case, and in fact
it's possible to do it using a buffered IO write, since when failing to
allocate data space, the buffered IO path checks if a NOCOW write is
possible.
The failure in direct IO write path comes from the fact that early on,
at btrfs_dio_iomap_begin(), we try to allocate data space for the write
and if it that fails we return the error and stop - we never check if we
can do NOCOW. But later, at btrfs_get_blocks_direct_write(), we check
if we can do a NOCOW write into the range, or a subset of the range, and
then release the previously reserved data space.
Fix this by doing the data reservation only if needed, when we must COW,
at btrfs_get_blocks_direct_write() instead of doing it at
btrfs_dio_iomap_begin(). This also simplifies a bit the logic and removes
the inneficiency of doing unnecessary data reservations.
The following example test script reproduces the problem:
$ cat dio-nocow-enospc.sh
#!/bin/bash
DEV=/dev/sdj
MNT=/mnt/sdj
# Use a small fixed size (1G) filesystem so that it's quick to fill
# it up.
# Make sure the mixed block groups feature is not enabled because we
# later want to not have more space available for allocating data
# extents but still have enough metadata space free for the file writes.
mkfs.btrfs -f -b $((1024 * 1024 * 1024)) -O ^mixed-bg $DEV
mount $DEV $MNT
# Create our test file with the NOCOW attribute set.
touch $MNT/foobar
chattr +C $MNT/foobar
# Now fill in all unallocated space with data for our test file.
# This will allocate a data block group that will be full and leave
# no (or a very small amount of) unallocated space in the device, so
# that it will not be possible to allocate a new block group later.
echo
echo "Creating test file with initial data..."
xfs_io -c "pwrite -S 0xab -b 1M 0 900M" $MNT/foobar
# Now try a direct IO write against file range [0, 10M[.
# This should succeed since this is a NOCOW file and an extent for the
# range was previously allocated.
echo
echo "Trying direct IO write over allocated space..."
xfs_io -d -c "pwrite -S 0xcd -b 10M 0 10M" $MNT/foobar
umount $MNT
When running the test:
$ ./dio-nocow-enospc.sh
(...)
Creating test file with initial data...
wrote
943718400/
943718400 bytes at offset 0
900 MiB, 900 ops; 0:00:01.43 (625.526 MiB/sec and 625.5265 ops/sec)
Trying direct IO write over allocated space...
pwrite: No space left on device
A test case for fstests will follow, testing both this direct IO write
scenario as well as the buffered IO write scenario to make it less likely
to get future regressions on the buffered IO case.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Linus Torvalds [Sun, 2 Jan 2022 22:23:25 +0000 (14:23 -0800)]
Linux 5.16-rc8
Linus Torvalds [Sun, 2 Jan 2022 22:09:03 +0000 (14:09 -0800)]
Merge tag 'perf-tools-fixes-for-v5.16-2022-01-02' of git://git./linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix TUI exit screen refresh race condition in 'perf top'.
- Fix parsing of Intel PT VM time correlation arguments.
- Honour CPU filtering command line request of a script's switch events
in 'perf script'.
- Fix printing of switch events in Intel PT python script.
- Fix duplicate alias events list printing in 'perf list', noticed on
heterogeneous arm64 systems.
- Fix return value of ids__new(), users expect NULL for failure, not
ERR_PTR(-ENOMEM).
* tag 'perf-tools-fixes-for-v5.16-2022-01-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf top: Fix TUI exit screen refresh race condition
perf pmu: Fix alias events list
perf scripts python: intel-pt-events.py: Fix printing of switch events
perf script: Fix CPU filtering of a script's switch events
perf intel-pt: Fix parsing of VM time correlation arguments
perf expr: Fix return value of ids__new()
Linus Torvalds [Sun, 2 Jan 2022 18:36:09 +0000 (10:36 -0800)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Better input validation for compat ioctls and a documentation bugfix
for 5.16"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Docs: Fixes link to I2C specification
i2c: validate user data in compat ioctl
Linus Torvalds [Sun, 2 Jan 2022 17:02:54 +0000 (09:02 -0800)]
Merge tag 'x86_urgent_for_v5.16_rc8' of git://git./linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
- Use the proper CONFIG symbol in a preprocessor check.
* tag 'x86_urgent_for_v5.16_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/build: Use the proper name CONFIG_FW_LOADER
yaowenbin [Wed, 29 Dec 2021 08:55:19 +0000 (16:55 +0800)]
perf top: Fix TUI exit screen refresh race condition
When the following command is executed several times, a coredump file is
generated.
$ timeout -k 9 5 perf top -e task-clock
*******
*******
*******
0.01% [kernel] [k] __do_softirq
0.01% libpthread-2.28.so [.] __pthread_mutex_lock
0.01% [kernel] [k] __ll_sc_atomic64_sub_return
double free or corruption (!prev) perf top --sort comm,dso
timeout: the monitored command dumped core
When we terminate "perf top" using sending signal method,
SLsmg_reset_smg() called. SLsmg_reset_smg() resets the SLsmg screen
management routines by freeing all memory allocated while it was active.
However SLsmg_reinit_smg() maybe be called by another thread.
SLsmg_reinit_smg() will free the same memory accessed by
SLsmg_reset_smg(), thus it results in a double free.
SLsmg_reinit_smg() is called already protected by ui__lock, so we fix
the problem by adding pthread_mutex_trylock of ui__lock when calling
SLsmg_reset_smg().
Signed-off-by: Wenyu Liu <liuwenyu7@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: wuxu.wu@huawei.com
Link: http://lore.kernel.org/lkml/a91e3943-7ddc-f5c0-a7f5-360f073c20e6@huawei.com
Signed-off-by: Hewenliang <hewenliang4@huawei.com>
Signed-off-by: yaowenbin <yaowenbin1@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
John Garry [Tue, 21 Dec 2021 16:11:30 +0000 (00:11 +0800)]
perf pmu: Fix alias events list
Commit
0e0ae8742207c3b4 ("perf list: Display hybrid PMU events with cpu
type") changes the event list for uncore PMUs or arm64 heterogeneous CPU
systems, such that duplicate aliases are incorrectly listed per PMU
(which they should not be), like:
# perf list
...
unc_cbo_cache_lookup.any_es
[Unit: uncore_cbox L3 Lookup any request that access cache and found
line in E or S-state]
unc_cbo_cache_lookup.any_es
[Unit: uncore_cbox L3 Lookup any request that access cache and found
line in E or S-state]
unc_cbo_cache_lookup.any_i
[Unit: uncore_cbox L3 Lookup any request that access cache and found
line in I-state]
unc_cbo_cache_lookup.any_i
[Unit: uncore_cbox L3 Lookup any request that access cache and found
line in I-state]
...
Notice how the events are listed twice.
The named commit changed how we remove duplicate events, in that events
for different PMUs are not treated as duplicates. I suppose this is to
handle how "Each hybrid pmu event has been assigned with a pmu name".
Fix PMU alias listing by restoring behaviour to remove duplicates for
non-hybrid PMUs.
Fixes:
0e0ae8742207c3b4 ("perf list: Display hybrid PMU events with cpu type")
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/1640103090-140490-1-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Sat, 1 Jan 2022 18:21:49 +0000 (10:21 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"Two small fixups for spaceball joystick driver and appletouch touchpad
driver"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: spaceball - fix parsing of movement data packets
Input: appletouch - initialize work before device registration
Mel Gorman [Fri, 31 Dec 2021 21:10:09 +0000 (13:10 -0800)]
mm: vmscan: reduce throttling due to a failure to make progress -fix
Hugh Dickins reported the following
My tmpfs swapping load (tweaked to use huge pages more heavily
than in real life) is far from being a realistic load: but it was
notably slowed down by your throttling mods in 5.16-rc, and this
patch makes it well again - thanks.
But: it very quickly hit NULL pointer until I changed that last
line to
if (first_pgdat)
consider_reclaim_throttle(first_pgdat, sc);
The likely issue is that huge pages are a major component of the test
workload. When this is the case, first_pgdat may never get set if
compaction is ready to continue due to this check
if (IS_ENABLED(CONFIG_COMPACTION) &&
sc->order > PAGE_ALLOC_COSTLY_ORDER &&
compaction_ready(zone, sc)) {
sc->compaction_ready = true;
continue;
}
If this was true for every zone in the zonelist, first_pgdat would never
get set resulting in a NULL pointer exception.
Link: https://lkml.kernel.org/r/20211209095453.GM3366@techsingularity.net
Fixes:
1b4e3f26f9f75 ("mm: vmscan: Reduce throttling due to a failure to make progress")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Hugh Dickins <hughd@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mel Gorman [Thu, 2 Dec 2021 15:06:14 +0000 (15:06 +0000)]
mm: vmscan: Reduce throttling due to a failure to make progress
Mike Galbraith, Alexey Avramov and Darrick Wong all reported similar
problems due to reclaim throttling for excessive lengths of time. In
Alexey's case, a memory hog that should go OOM quickly stalls for
several minutes before stalling. In Mike and Darrick's cases, a small
memcg environment stalled excessively even though the system had enough
memory overall.
Commit
69392a403f49 ("mm/vmscan: throttle reclaim when no progress is
being made") introduced the problem although commit
a19594ca4a8b
("mm/vmscan: increase the timeout if page reclaim is not making
progress") made it worse. Systems at or near an OOM state that cannot
be recovered must reach OOM quickly and memcg should kill tasks if a
memcg is near OOM.
To address this, only stall for the first zone in the zonelist, reduce
the timeout to 1 tick for VMSCAN_THROTTLE_NOPROGRESS and only stall if
the scan control nr_reclaimed is 0, kswapd is still active and there
were excessive pages pending for writeback. If kswapd has stopped
reclaiming due to excessive failures, do not stall at all so that OOM
triggers relatively quickly. Similarly, if an LRU is simply congested,
only lightly throttle similar to NOPROGRESS.
Alexey's original case was the most straight forward
for i in {1..3}; do tail /dev/zero; done
On vanilla 5.16-rc1, this test stalled heavily, after the patch the test
completes in a few seconds similar to 5.15.
Alexey's second test case added watching a youtube video while tail runs
10 times. On 5.15, playback only jitters slightly, 5.16-rc1 stalls a
lot with lots of frames missing and numerous audio glitches. With this
patch applies, the video plays similarly to 5.15.
[lkp@intel.com: Fix W=1 build warning]
Link: https://lore.kernel.org/r/99e779783d6c7fce96448a3402061b9dc1b3b602.camel@gmx.de
Link: https://lore.kernel.org/r/20211124011954.7cab9bb4@mail.inbox.lv
Link: https://lore.kernel.org/r/20211022144651.19914-1-mgorman@techsingularity.net
Link: https://lore.kernel.org/r/20211202150614.22440-1-mgorman@techsingularity.net
Link: https://linux-regtracking.leemhuis.info/regzbot/regression/20211124011954.7cab9bb4@mail.inbox.lv/
Reported-and-tested-by: Alexey Avramov <hakavlad@inbox.lv>
Reported-and-tested-by: Mike Galbraith <efault@gmx.de>
Reported-and-tested-by: Darrick J. Wong <djwong@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Hugh Dickins <hughd@google.com>
Tracked-by: Thorsten Leemhuis <regressions@leemhuis.info>
Fixes:
69392a403f49 ("mm/vmscan: throttle reclaim when no progress is being made")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 31 Dec 2021 17:28:48 +0000 (09:28 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc mm fixes from Andrew Morton:
"2 patches.
Subsystems affected by this patch series: mm (userfaultfd and damon)"
* akpm:
mm/damon/dbgfs: fix 'struct pid' leaks in 'dbgfs_target_ids_write()'
userfaultfd/selftests: fix hugetlb area allocations
Linus Torvalds [Fri, 31 Dec 2021 17:22:25 +0000 (09:22 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three fixes, all in drivers. The lpfc one doesn't look exploitable,
but nasty things could happen in string operations if mybuf ends up
with an on stack unterminated string"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: vmw_pvscsi: Set residual data length conditionally
scsi: libiscsi: Fix UAF in iscsi_conn_get_param()/iscsi_conn_teardown()
scsi: lpfc: Terminate string in lpfc_debugfs_nvmeio_trc_write()
SeongJae Park [Fri, 31 Dec 2021 04:12:34 +0000 (20:12 -0800)]
mm/damon/dbgfs: fix 'struct pid' leaks in 'dbgfs_target_ids_write()'
DAMON debugfs interface increases the reference counts of 'struct pid's
for targets from the 'target_ids' file write callback
('dbgfs_target_ids_write()'), but decreases the counts only in DAMON
monitoring termination callback ('dbgfs_before_terminate()').
Therefore, when 'target_ids' file is repeatedly written without DAMON
monitoring start/termination, the reference count is not decreased and
therefore memory for the 'struct pid' cannot be freed. This commit
fixes this issue by decreasing the reference counts when 'target_ids' is
written.
Link: https://lkml.kernel.org/r/20211229124029.23348-1-sj@kernel.org
Fixes:
4bc05954d007 ("mm/damon: implement a debugfs-based user space interface")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Kravetz [Fri, 31 Dec 2021 04:12:31 +0000 (20:12 -0800)]
userfaultfd/selftests: fix hugetlb area allocations
Currently, userfaultfd selftest for hugetlb as run from run_vmtests.sh
or any environment where there are 'just enough' hugetlb pages will
always fail with:
testing events (fork, remap, remove):
ERROR: UFFDIO_COPY error: -12 (errno=12, line=616)
The ENOMEM error code implies there are not enough hugetlb pages.
However, there are free hugetlb pages but they are all reserved. There
is a basic problem with the way the test allocates hugetlb pages which
has existed since the test was originally written.
Due to the way 'cleanup' was done between different phases of the test,
this issue was masked until recently. The issue was uncovered by commit
8ba6e8640844 ("userfaultfd/selftests: reinitialize test context in each
test").
For the hugetlb test, src and dst areas are allocated as PRIVATE
mappings of a hugetlb file. This means that at mmap time, pages are
reserved for the src and dst areas. At the start of event testing (and
other tests) the src area is populated which results in allocation of
huge pages to fill the area and consumption of reserves associated with
the area. Then, a child is forked to fault in the dst area. Note that
the dst area was allocated in the parent and hence the parent owns the
reserves associated with the mapping. The child has normal access to
the dst area, but can not use the reserves created/owned by the parent.
Thus, if there are no other huge pages available allocation of a page
for the dst by the child will fail.
Fix by not creating reserves for the dst area. In this way the child
can use free (non-reserved) pages.
Also, MAP_PRIVATE of a file only makes sense if you are interested in
the contents of the file before making a COW copy. The test does not do
this. So, just use MAP_ANONYMOUS | MAP_HUGETLB to create an anonymous
hugetlb mapping. There is no need to create a hugetlb file in the
non-shared case.
Link: https://lkml.kernel.org/r/20211217172919.7861-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Deep Majumder [Fri, 19 Nov 2021 06:14:01 +0000 (11:44 +0530)]
Docs: Fixes link to I2C specification
The link to the I2C specification is broken. Although
"https://www.nxp.com" hosts Rev 7 (2021) of this specification, it is
behind a login-wall. Thus, an additional link has been added (which
doesn't require a login) and the NXP official docs link has been
updated.
Signed-off-by: Deep Majumder <deep@fastmail.in>
[wsa: minor updates to text and commit message]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Pavel Skripkin [Thu, 30 Dec 2021 22:47:50 +0000 (01:47 +0300)]
i2c: validate user data in compat ioctl
Wrong user data may cause warning in i2c_transfer(), ex: zero msgs.
Userspace should not be able to trigger warnings, so this patch adds
validation checks for user data in compact ioctl to prevent reported
warnings
Reported-and-tested-by: syzbot+e417648b303855b91d8a@syzkaller.appspotmail.com
Fixes:
7d5cb45655f2 ("i2c compat ioctls: move to ->compat_ioctl()")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Leo L. Schwab [Fri, 31 Dec 2021 05:05:00 +0000 (21:05 -0800)]
Input: spaceball - fix parsing of movement data packets
The spaceball.c module was not properly parsing the movement reports
coming from the device. The code read axis data as signed 16-bit
little-endian values starting at offset 2.
In fact, axis data in Spaceball movement reports are signed 16-bit
big-endian values starting at offset 3. This was determined first by
visually inspecting the data packets, and later verified by consulting:
http://spacemice.org/pdf/SpaceBall_2003-3003_Protocol.pdf
If this ever worked properly, it was in the time before Git...
Signed-off-by: Leo L. Schwab <ewhac@ewhac.org>
Link: https://lore.kernel.org/r/20211221101630.1146385-1-ewhac@ewhac.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pavel Skripkin [Fri, 31 Dec 2021 04:57:46 +0000 (20:57 -0800)]
Input: appletouch - initialize work before device registration
Syzbot has reported warning in __flush_work(). This warning is caused by
work->func == NULL, which means missing work initialization.
This may happen, since input_dev->close() calls
cancel_work_sync(&dev->work), but dev->work initalization happens _after_
input_register_device() call.
So this patch moves dev->work initialization before registering input
device
Fixes:
5a6eb676d3bc ("Input: appletouch - improve powersaving for Geyser3 devices")
Reported-and-tested-by: syzbot+b88c5eae27386b252bbd@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20211230141151.17300-1-paskripkin@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Linus Torvalds [Fri, 31 Dec 2021 02:25:43 +0000 (18:25 -0800)]
Merge tag 'drm-fixes-2021-12-31' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"This is a bit bigger than I'd like, however it has two weeks of amdgpu
fixes in it, since they missed last week, which was very small.
The nouveau regression is probably the biggest fix in here, and it
needs to go into 5.15 as well, two i915 fixes, and then a scattering
of amdgpu fixes. The biggest fix in there is for a fencing NULL
pointer dereference, the rest are pretty minor.
For the misc team, I've pulled the two misc fixes manually since I'm
not sure what is happening at this time of year!
The amdgpu maintainers have the outstanding runpm regression to fix
still, they are just working through the last bits of it now.
Summary:
nouveau:
- fencing regression fix
i915:
- Fix possible uninitialized variable
- Fix composite fence seqno icrement on each fence creation
amdgpu:
- Fencing fix
- XGMI fix
- VCN regression fix
- IP discovery regression fixes
- Fix runpm documentation
- Suspend/resume fixes
- Yellow Carp display fixes
- MCLK power management fix
- dma-buf fix"
* tag 'drm-fixes-2021-12-31' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: Changed pipe split policy to allow for multi-display pipe split
drm/amd/display: Fix USB4 null pointer dereference in update_psp_stream_config
drm/amd/display: Set optimize_pwr_state for DCN31
drm/amd/display: Send s0i2_rdy in stream_count == 0 optimization
drm/amd/display: Added power down for DCN10
drm/amd/display: fix B0 TMDS deepcolor no dislay issue
drm/amdgpu: no DC support for headless chips
drm/amdgpu: put SMU into proper state on runpm suspending for BOCO capable platform
drm/amdgpu: always reset the asic in suspend (v2)
drm/amd/pm: skip setting gfx cgpg in the s0ix suspend-resume
drm/i915: Increment composite fence seqno
drm/i915: Fix possible uninitialized variable in parallel extension
drm/amdgpu: fix runpm documentation
drm/nouveau: wait for the exclusive fence after the shared ones v2
drm/amdgpu: add support for IP discovery gc_info table v2
drm/amdgpu: When the VCN(1.0) block is suspended, powergating is explicitly enabled
drm/amd/pm: Fix xgmi link control on aldebaran
drm/amdgpu: introduce new amdgpu_fence object to indicate the job embedded fence
drm/amdgpu: fix dropped backing store handling in amdgpu_dma_buf_move_notify
Dave Airlie [Fri, 31 Dec 2021 01:40:29 +0000 (11:40 +1000)]
Merge branch 'drm-misc-fixes' of ssh://git.freedesktop.org/git/drm/drm-misc into drm-fixes
This merges two fixes that haven't been sent to me yet, but I wanted to get in.
One amdgpu fix, but one nouveau regression fixer.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Christian Brauner [Thu, 30 Dec 2021 19:23:09 +0000 (20:23 +0100)]
fs/mount_setattr: always cleanup mount_kattr
Make sure that finish_mount_kattr() is called after mount_kattr was
succesfully built in both the success and failure case to prevent
leaking any references we took when we built it. We returned early if
path lookup failed thereby risking to leak an additional reference we
took when building mount_kattr when an idmapped mount was requested.
Cc: linux-fsdevel@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes:
9caccd41541a ("fs: introduce MOUNT_ATTR_IDMAP")
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 30 Dec 2021 19:12:12 +0000 (11:12 -0800)]
Merge tag 'net-5.16-rc8' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from.. Santa?
No regressions on our radar at this point. The igc problem fixed here
was the last one I was tracking but it was broken in previous
releases, anyway. Mostly driver fixes and a couple of largish SMC
fixes.
Current release - regressions:
- xsk: initialise xskb free_list_node, fixup for a -rc7 fix
Current release - new code bugs:
- mlx5: handful of minor fixes:
- use first online CPU instead of hard coded CPU
- fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'
- fix skb memory leak when TC classifier action offloads are disabled
- fix memory leak with rules with internal OvS port
Previous releases - regressions:
- igc: do not enable crosstimestamping for i225-V models
Previous releases - always broken:
- udp: use datalen to cap ipv6 udp max gso segments
- fix use-after-free in tw_timer_handler due to early free of stats
- smc: fix kernel panic caused by race of smc_sock
- smc: don't send CDC/LLC message if link not ready, avoid timeouts
- sctp: use call_rcu to free endpoint, avoid UAF in sock diag
- bridge: mcast: add and enforce query interval minimum
- usb: pegasus: do not drop long Ethernet frames
- mlx5e: fix ICOSQ recovery flow for XSK
- nfc: uapi: use kernel size_t to fix user-space builds"
* tag 'net-5.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
fsl/fman: Fix missing put_device() call in fman_port_probe
selftests: net: using ping6 for IPv6 in udpgro_fwd.sh
Documentation: fix outdated interpretation of ip_no_pmtu_disc
net/ncsi: check for error return from call to nla_put_u32
net: bridge: mcast: fix br_multicast_ctx_vlan_global_disabled helper
net: fix use-after-free in tw_timer_handler
selftests: net: Fix a typo in udpgro_fwd.sh
selftests/net: udpgso_bench_tx: fix dst ip argument
net: bridge: mcast: add and enforce startup query interval minimum
net: bridge: mcast: add and enforce query interval minimum
ipv6: raw: check passed optlen before reading
xsk: Initialise xskb free_list_node
net/mlx5e: Fix wrong features assignment in case of error
net/mlx5e: TC, Fix memory leak with rules with internal port
ionic: Initialize the 'lif->dbid_inuse' bitmap
igc: Fix TX timestamp support for non-MSI-X platforms
igc: Do not enable crosstimestamping for i225-V models
net/smc: fix kernel panic caused by race of smc_sock
net/smc: don't send CDC/LLC message if link not ready
NFC: st21nfca: Fix memory leak in device probe and remove
...
Linus Torvalds [Thu, 30 Dec 2021 17:52:32 +0000 (09:52 -0800)]
Merge tag 'char-misc-5.16' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are two misc driver fixes for 5.16-final:
- binder accounting fix to resolve reported problem
- nitro_enclaves fix for mmap assert warning output
Both of these have been for over a week with no reported issues"
* tag 'char-misc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
nitro_enclaves: Use get_user_pages_unlocked() call to handle mmap assert
binder: fix async_free_space accounting for empty parcels
Linus Torvalds [Thu, 30 Dec 2021 17:49:54 +0000 (09:49 -0800)]
Merge tag 'usb-5.16' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 5.16 to resolve some reported
problems:
- mtu3 driver fixes
- typec ucsi driver fix
- xhci driver quirk added
- usb gadget f_fs fix for reported crash
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Only check the contract if there is a connection
xhci: Fresco FL1100 controller should not have BROKEN_MSI quirk set.
usb: mtu3: set interval of FS intr and isoc endpoint
usb: mtu3: fix list_head check warning
usb: mtu3: add memory barrier before set GPD's HWO
usb: mtu3: fix interval value for intr and isoc
usb: gadget: f_fs: Clear ffs_eventfd in ffs_data_clear.
Miaoqian Lin [Thu, 30 Dec 2021 12:26:27 +0000 (12:26 +0000)]
fsl/fman: Fix missing put_device() call in fman_port_probe
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the and error handling paths.
Fixes:
18a6c85fcc78 ("fsl/fman: Add FMan Port Support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jianguo Wu [Thu, 30 Dec 2021 10:40:29 +0000 (18:40 +0800)]
selftests: net: using ping6 for IPv6 in udpgro_fwd.sh
udpgro_fwd.sh output following message:
ping: 2001:db8:1::100: Address family for hostname not supported
Using ping6 when pinging IPv6 addresses.
Fixes:
a062260a9d5f ("selftests: net: add UDP GRO forwarding self-tests")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
xu xin [Thu, 30 Dec 2021 03:28:56 +0000 (03:28 +0000)]
Documentation: fix outdated interpretation of ip_no_pmtu_disc
The updating way of pmtu has changed, but documentation is still in the
old way. So this patch updates the interpretation of ip_no_pmtu_disc and
min_pmtu.
See commit
28d35bcdd3925 ("net: ipv4: don't let PMTU updates increase
route MTU")
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dave Airlie [Thu, 30 Dec 2021 03:55:47 +0000 (13:55 +1000)]
Merge tag 'amd-drm-fixes-5.16-2021-12-29' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.16-2021-12-29:
amdgpu:
- Fencing fix
- XGMI fix
- VCN regression fix
- IP discovery regression fixes
- Fix runpm documentation
- Suspend/resume fixes
- Yellow Carp display fixes
- MCLK power management fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211229155129.5789-1-alexander.deucher@amd.com
Jakub Kicinski [Thu, 30 Dec 2021 02:19:01 +0000 (18:19 -0800)]
Merge tag 'mlx5-fixes-2021-12-28' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2021-12-28
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2021-12-28' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Fix wrong features assignment in case of error
net/mlx5e: TC, Fix memory leak with rules with internal port
====================
Link: https://lore.kernel.org/r/20211229065352.30178-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dave Airlie [Thu, 30 Dec 2021 02:12:40 +0000 (12:12 +1000)]
Merge tag 'drm-intel-fixes-2021-12-29' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.16:
- Fix possible uninitialized variable
- Fix composite fence seqno icrement on each fence creation
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87h7ark5r5.fsf@intel.com
Jiasheng Jiang [Wed, 29 Dec 2021 03:21:18 +0000 (11:21 +0800)]
net/ncsi: check for error return from call to nla_put_u32
As we can see from the comment of the nla_put() that it could return
-EMSGSIZE if the tailroom of the skb is insufficient.
Therefore, it should be better to check the return value of the
nla_put_u32 and return the error code if error accurs.
Also, there are many other functions have the same problem, and if this
patch is correct, I will commit a new version to fix all.
Fixes:
955dc68cb9b2 ("net/ncsi: Add generic netlink family")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20211229032118.1706294-1-jiasheng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikolay Aleksandrov [Tue, 28 Dec 2021 15:31:42 +0000 (17:31 +0200)]
net: bridge: mcast: fix br_multicast_ctx_vlan_global_disabled helper
We need to first check if the context is a vlan one, then we need to
check the global bridge multicast vlan snooping flag, and finally the
vlan's multicast flag, otherwise we will unnecessarily enable vlan mcast
processing (e.g. querier timers).
Fixes:
7b54aaaf53cb ("net: bridge: multicast: add vlan state initialization and control")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20211228153142.536969-1-nikolay@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Muchun Song [Tue, 28 Dec 2021 10:41:45 +0000 (18:41 +0800)]
net: fix use-after-free in tw_timer_handler
A real world panic issue was found as follow in Linux 5.4.
BUG: unable to handle page fault for address:
ffffde49a863de28
PGD
7e6fe62067 P4D
7e6fe62067 PUD
7e6fe63067 PMD
f51e064067 PTE 0
RIP: 0010:tw_timer_handler+0x20/0x40
Call Trace:
<IRQ>
call_timer_fn+0x2b/0x120
run_timer_softirq+0x1ef/0x450
__do_softirq+0x10d/0x2b8
irq_exit+0xc7/0xd0
smp_apic_timer_interrupt+0x68/0x120
apic_timer_interrupt+0xf/0x20
This issue was also reported since 2017 in the thread [1],
unfortunately, the issue was still can be reproduced after fixing
DCCP.
The ipv4_mib_exit_net is called before tcp_sk_exit_batch when a net
namespace is destroyed since tcp_sk_ops is registered befrore
ipv4_mib_ops, which means tcp_sk_ops is in the front of ipv4_mib_ops
in the list of pernet_list. There will be a use-after-free on
net->mib.net_statistics in tw_timer_handler after ipv4_mib_exit_net
if there are some inflight time-wait timers.
This bug is not introduced by commit
f2bf415cfed7 ("mib: add net to
NET_ADD_STATS_BH") since the net_statistics is a global variable
instead of dynamic allocation and freeing. Actually, commit
61a7e26028b9 ("mib: put net statistics on struct net") introduces
the bug since it put net statistics on struct net and free it when
net namespace is destroyed.
Moving init_ipv4_mibs() to the front of tcp_init() to fix this bug
and replace pr_crit() with panic() since continuing is meaningless
when init_ipv4_mibs() fails.
[1] https://groups.google.com/g/syzkaller/c/p1tn-_Kc6l4/m/smuL_FMAAgAJ?pli=1
Fixes:
61a7e26028b9 ("mib: put net statistics on struct net")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Cong Wang <cong.wang@bytedance.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211228104145.9426-1-songmuchun@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jianguo Wu [Wed, 29 Dec 2021 07:27:30 +0000 (15:27 +0800)]
selftests: net: Fix a typo in udpgro_fwd.sh
$rvs -> $rcv
Fixes:
a062260a9d5f ("selftests: net: add UDP GRO forwarding self-tests")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Link: https://lore.kernel.org/r/d247d7c8-a03a-0abf-3c71-4006a051d133@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
wujianguo [Wed, 29 Dec 2021 10:58:10 +0000 (18:58 +0800)]
selftests/net: udpgso_bench_tx: fix dst ip argument
udpgso_bench_tx call setup_sockaddr() for dest address before
parsing all arguments, if we specify "-p ${dst_port}" after "-D ${dst_ip}",
then ${dst_port} will be ignored, and using default cfg_port 8000.
This will cause test case "multiple GRO socks" failed in udpgro.sh.
Setup sockaddr after parsing all arguments.
Fixes:
3a687bef148d ("selftests: udp gso benchmark")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/ff620d9f-5b52-06ab-5286-44b945453002@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lukas Bulwahn [Wed, 29 Dec 2021 11:15:53 +0000 (12:15 +0100)]
x86/build: Use the proper name CONFIG_FW_LOADER
Commit in Fixes intends to add the expression regex only when FW_LOADER
is enabled - not FW_LOADER_BUILTIN. Latter is a leftover from a previous
patchset and not a valid config item.
So, adjust the condition to the actual name of the config.
[ bp: Cleanup commit message. ]
Fixes:
c8dcf655ec81 ("x86/build: Tuck away built-in firmware under FW_LOADER")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20211229111553.5846-1-lukas.bulwahn@gmail.com
Jakub Kicinski [Wed, 29 Dec 2021 20:59:43 +0000 (12:59 -0800)]
Merge branch 'net-bridge-mcast-add-and-enforce-query-interval-minimum'
Nikolay Aleksandrov says:
====================
net: bridge: mcast: add and enforce query interval minimum
This set adds and enforces 1 second minimum value for bridge multicast
query and startup query intervals in order to avoid rearming the timers
too often which could lock and crash the host. I doubt anyone is using
such low values or anything lower than 1 second, so it seems like a good
minimum. In order to be compatible if the value is lower then it is
overwritten and a log message is emitted, since we can't return an error
at this point.
Eric, I looked for the syzbot reports in its dashboard but couldn't find
them so I've added you as the reporter.
I've prepared a global bridge igmp rate limiting patch but wasn't
sure if it's ok for -net. It adds a static limit of 32k packets per
second, I plan to send it for net-next with added drop counters for
each bridge so it can be easily debugged.
Original report can be seen at:
https://lore.kernel.org/netdev/
e8b9ce41-57b9-b6e2-a46a-
ff9c791cf0ba@gmail.com/
====================
Link: https://lore.kernel.org/r/20211227172116.320768-1-nikolay@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikolay Aleksandrov [Mon, 27 Dec 2021 17:21:16 +0000 (19:21 +0200)]
net: bridge: mcast: add and enforce startup query interval minimum
As reported[1] if startup query interval is set too low in combination with
large number of startup queries and we have multiple bridges or even a
single bridge with multiple querier vlans configured we can crash the
machine. Add a 1 second minimum which must be enforced by overwriting the
value if set lower (i.e. without returning an error) to avoid breaking
user-space. If that happens a log message is emitted to let the admin know
that the startup interval has been set to the minimum. It doesn't make
sense to make the startup interval lower than the normal query interval
so use the same value of 1 second. The issue has been present since these
intervals could be user-controlled.
[1] https://lore.kernel.org/netdev/
e8b9ce41-57b9-b6e2-a46a-
ff9c791cf0ba@gmail.com/
Fixes:
d902eee43f19 ("bridge: Add multicast count/interval sysfs entries")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikolay Aleksandrov [Mon, 27 Dec 2021 17:21:15 +0000 (19:21 +0200)]
net: bridge: mcast: add and enforce query interval minimum
As reported[1] if query interval is set too low and we have multiple
bridges or even a single bridge with multiple querier vlans configured
we can crash the machine. Add a 1 second minimum which must be enforced
by overwriting the value if set lower (i.e. without returning an error) to
avoid breaking user-space. If that happens a log message is emitted to let
the administrator know that the interval has been set to the minimum.
The issue has been present since these intervals could be user-controlled.
[1] https://lore.kernel.org/netdev/
e8b9ce41-57b9-b6e2-a46a-
ff9c791cf0ba@gmail.com/
Fixes:
d902eee43f19 ("bridge: Add multicast count/interval sysfs entries")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tamir Duberstein [Wed, 29 Dec 2021 20:09:47 +0000 (15:09 -0500)]
ipv6: raw: check passed optlen before reading
Add a check that the user-provided option is at least as long as the
number of bytes we intend to read. Before this patch we would blindly
read sizeof(int) bytes even in cases where the user passed
optlen<sizeof(int), which would potentially read garbage or fault.
Discovered by new tests in https://github.com/google/gvisor/pull/6957 .
The original get_user call predates history in the git repo.
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20211229200947.2862255-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Wed, 29 Dec 2021 18:07:20 +0000 (10:07 -0800)]
Merge tag 's390-5.16-6' of git://git./linux/kernel/git/s390/linux
Pull s390 fix from Heiko Carstens:
- fix s390 mcount regex typo in recordmcount.pl
* tag 's390-5.16-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
recordmcount.pl: fix typo in s390 mcount regex
Ciara Loftus [Mon, 20 Dec 2021 15:52:50 +0000 (15:52 +0000)]
xsk: Initialise xskb free_list_node
This commit initialises the xskb's free_list_node when the xskb is
allocated. This prevents a potential false negative returned from a call
to list_empty for that node, such as the one introduced in commit
199d983bc015 ("xsk: Fix crash on double free in buffer pool")
In my environment this issue caused packets to not be received by
the xdpsock application if the traffic was running prior to application
launch. This happened when the first batch of packets failed the xskmap
lookup and XDP_PASS was returned from the bpf program. This action is
handled in the i40e zc driver (and others) by allocating an skbuff,
freeing the xdp_buff and adding the associated xskb to the
xsk_buff_pool's free_list if it hadn't been added already. Without this
fix, the xskb is not added to the free_list because the check to determine
if it was added already returns an invalid positive result. Later, this
caused allocation errors in the driver and the failure to receive packets.
Fixes:
199d983bc015 ("xsk: Fix crash on double free in buffer pool")
Fixes:
2b43470add8c ("xsk: Introduce AF_XDP buffer allocation API")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20211220155250.2746-1-ciara.loftus@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gal Pressman [Mon, 29 Nov 2021 09:08:41 +0000 (11:08 +0200)]
net/mlx5e: Fix wrong features assignment in case of error
In case of an error in mlx5e_set_features(), 'netdev->features' must be
updated with the correct state of the device to indicate which features
were updated successfully.
To do that we maintain a copy of 'netdev->features' and update it after
successful feature changes, so we can assign it to back to
'netdev->features' if needed.
However, since not all netdev features are handled by the driver (e.g.
GRO/TSO/etc), some features may not be updated correctly in case of an
error updating another feature.
For example, while requesting to disable TSO (feature which is not
handled by the driver) and enable HW-GRO, if an error occurs during
HW-GRO enable, 'oper_features' will be assigned with 'netdev->features'
and HW-GRO turned off. TSO will remain enabled in such case, which is a
bug.
To solve that, instead of using 'netdev->features' as the baseline of
'oper_features' and changing it on set feature success, use 'features'
instead and update it in case of errors.
Fixes:
75b81ce719b7 ("net/mlx5e: Don't override netdev features field unless in error flow")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Roi Dayan [Wed, 22 Dec 2021 07:20:58 +0000 (09:20 +0200)]
net/mlx5e: TC, Fix memory leak with rules with internal port
Fix a memory leak with decap rule with internal port as destination
device. The driver allocates a modify hdr action but doesn't set
the flow attr modify hdr action which results in skipping releasing
the modify hdr action when releasing the flow.
backtrace:
[<
000000005f8c651c>] krealloc+0x83/0xd0
[<
000000009f59b143>] alloc_mod_hdr_actions+0x156/0x310 [mlx5_core]
[<
000000002257f342>] mlx5e_tc_match_to_reg_set_and_get_id+0x12a/0x360 [mlx5_core]
[<
00000000b44ea75a>] mlx5e_tc_add_fdb_flow+0x962/0x1470 [mlx5_core]
[<
0000000003e384a0>] __mlx5e_add_fdb_flow+0x54c/0xb90 [mlx5_core]
[<
00000000ed8b22b6>] mlx5e_configure_flower+0xe45/0x4af0 [mlx5_core]
[<
00000000024f4ab5>] mlx5e_rep_indr_offload.isra.0+0xfe/0x1b0 [mlx5_core]
[<
000000006c3bb494>] mlx5e_rep_indr_setup_tc_cb+0x90/0x130 [mlx5_core]
[<
00000000d3dac2ea>] tc_setup_cb_add+0x1d2/0x420
Fixes:
b16eb3c81fe2 ("net/mlx5: Support internal port as decap route device")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Jakub Kicinski [Wed, 29 Dec 2021 00:19:09 +0000 (16:19 -0800)]
Merge branch '1GbE' of git://git./linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-12-28
This series contains updates to igc driver only.
Vinicius disables support for crosstimestamp on i225-V as lockups are being
observed.
James McLaughlin fixes Tx timestamping support on non-MSI-X platforms.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: Fix TX timestamp support for non-MSI-X platforms
igc: Do not enable crosstimestamping for i225-V models
====================
Link: https://lore.kernel.org/r/20211228182421.340354-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Christophe JAILLET [Sun, 26 Dec 2021 14:06:17 +0000 (15:06 +0100)]
ionic: Initialize the 'lif->dbid_inuse' bitmap
When allocated, this bitmap is not initialized. Only the first bit is set a
few lines below.
Use bitmap_zalloc() to make sure that it is cleared before being used.
Fixes:
6461b446f2a0 ("ionic: Add interrupts and doorbells")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Link: https://lore.kernel.org/r/6a478eae0b5e6c63774e1f0ddb1a3f8c38fa8ade.1640527506.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Angus Wang [Thu, 9 Dec 2021 22:27:01 +0000 (17:27 -0500)]
drm/amd/display: Changed pipe split policy to allow for multi-display pipe split
[WHY]
Current implementation of pipe split policy prevents pipe split with
multiple displays connected, which caused the MCLK speed to be stuck at
max
[HOW]
Changed the pipe split policies so that pipe split is allowed for
multi-display configurations
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1522
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1709
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1655
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403
Note this is a backport of this commit from amdgpu drm-next for 5.16.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Angus Wang <angus.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Nicholas Kazlauskas [Fri, 17 Dec 2021 19:18:59 +0000 (14:18 -0500)]
drm/amd/display: Fix USB4 null pointer dereference in update_psp_stream_config
[Why]
A porting error on a previous patch left the block of code that
causes the crash from a NULL pointer dereference.
More specifically, we try to access link_enc before it's assigned in
the USB4 case in the following assignment:
config.dio_output_idx = link_enc->transmitter - TRANSMITTER_UNIPHY_A;
[How]
That assignment occurs later depending on the ASIC version. It's only
needed on DCN31 and only after link_enc is already assigned.
Fixes:
986430446c917b ("drm/amd/display: fix a crash on USB4 over C20 PHY")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Thu, 9 Dec 2021 21:05:36 +0000 (16:05 -0500)]
drm/amd/display: Set optimize_pwr_state for DCN31
[Why]
We'll exit optimized power state to do link detection but we won't enter
back into the optimized power state.
This could potentially block s2idle entry depending on the sequencing,
but it also means we're losing some power during the transition period.
[How]
Hook up the handler like DCN21. It was also missed like the
exit_optimized_pwr_state callback.
Fixes:
64b1d0e8d500 ("drm/amd/display: Add DCN3.1 HWSEQ")
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Thu, 9 Dec 2021 18:53:36 +0000 (13:53 -0500)]
drm/amd/display: Send s0i2_rdy in stream_count == 0 optimization
[Why]
Otherwise SMU won't mark Display as idle when trying to perform s2idle.
[How]
Mark the bit in the dcn31 codepath, doesn't apply to older ASIC.
It needed to be split from phy refclk off to prevent entering s2idle
when PSR was engaged but driver was not ready.
Fixes:
118a33151658 ("drm/amd/display: Add DCN3.1 clock manager support")
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lai, Derek [Mon, 6 Dec 2021 09:10:59 +0000 (17:10 +0800)]
drm/amd/display: Added power down for DCN10
[Why]
The change of setting a timer callback on boot for 10 seconds is still
working, just lacked power down for DCN10.
[How]
Added power down for DCN10.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Derek Lai <Derek.Lai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Mon, 6 Dec 2021 02:19:30 +0000 (21:19 -0500)]
drm/amd/display: fix B0 TMDS deepcolor no dislay issue
[why]
B0 PHY C map to F, D map to G driver use logic instance, dmub does the
remap. Driver still need use the right PHY instance to access right HW.
[how]
use phyical instance when program PHY register.
[note]
could move resync_control programming to dmub next.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Linus Torvalds [Tue, 28 Dec 2021 21:33:06 +0000 (13:33 -0800)]
Merge tag 'selinux-pr-
20211228' of git://git./linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"One more small SELinux patch to address an uninitialized stack
variable"
* tag 'selinux-pr-
20211228' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: initialize proto variable in selinux_ip_postroute_compat()
Adrian Hunter [Wed, 15 Dec 2021 08:06:36 +0000 (10:06 +0200)]
perf scripts python: intel-pt-events.py: Fix printing of switch events
The intel-pt-events.py script displays only the last of consecutive switch
statements but that may not be the last switch event for the CPU. Fix by
keeping a dictionary of last context switch keyed by CPU, and make it
possible to see all switch events by adding option --all-switch-events.
Fixes:
a92bf335fd82eeee ("perf scripts python: intel-pt-events.py: Add branches to script")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211215080636.149562-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Wed, 15 Dec 2021 08:06:35 +0000 (10:06 +0200)]
perf script: Fix CPU filtering of a script's switch events
CPU filtering was not being applied to a script's switch events.
Fixes:
5bf83c29a0ad2e78 ("perf script: Add scripting operation process_switch()")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211215080636.149562-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Wed, 15 Dec 2021 08:06:34 +0000 (10:06 +0200)]
perf intel-pt: Fix parsing of VM time correlation arguments
Parser did not take ':' into account.
Example:
Before:
$ perf record -e intel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.026 MB perf.data ]
$ perf inject -i perf.data --vm-time-correlation="dry-run 123"
$ perf inject -i perf.data --vm-time-correlation="dry-run 123:456"
Failed to parse VM Time Correlation options
0x620 [0x98]: failed to process type: 70 [Invalid argument]
$
After:
$ perf inject -i perf.data --vm-time-correlation="dry-run 123:456"
$
Fixes:
e3ff42bdebcfeb5f ("perf intel-pt: Parse VM Time Correlation options and set up decoding")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211215080636.149562-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Miaoqian Lin [Tue, 14 Dec 2021 01:10:27 +0000 (01:10 +0000)]
perf expr: Fix return value of ids__new()
callers of ids__new() function only do NULL checking for the return
value. ids__new() calles hashmap__new(), which may return
ERR_PTR(-ENOMEM).
Instead of changing the checking one-by-one return NULL instead of
ERR_PTR(-ENOMEM) to keep it consistent.
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: German Gomez <german.gomez@arm.com>
Tested-by: German Gomez <german.gomez@arm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20211214011030.20200-1-linmq006@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Tue, 28 Dec 2021 19:46:15 +0000 (11:46 -0800)]
Merge tag 'auxdisplay-for-linus-v5.16' of git://github.com/ojeda/linux
Pull auxdisplay fixes from Miguel Ojeda:
"A couple of improvements for charlcd:
- check pointer before dereferencing
- fix coding style issue"
* tag 'auxdisplay-for-linus-v5.16' of git://github.com/ojeda/linux:
auxdisplay: charlcd: checking for pointer reference before dereferencing
auxdisplay: charlcd: fixing coding style issue
Linus Torvalds [Tue, 28 Dec 2021 19:42:01 +0000 (11:42 -0800)]
Merge tag 'powerpc-5.16-5' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"Fix DEBUG_WX never reporting any WX mappings, due to use of an
incorrect config symbol since we converted to using generic ptdump"
* tag 'powerpc-5.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/ptdump: Fix DEBUG_WX since generic ptdump conversion
James McLaughlin [Fri, 17 Dec 2021 23:49:33 +0000 (16:49 -0700)]
igc: Fix TX timestamp support for non-MSI-X platforms
Time synchronization was not properly enabled on non-MSI-X platforms.
Fixes:
2c344ae24501 ("igc: Add support for TX timestamping")
Signed-off-by: James McLaughlin <james.mclaughlin@qsc.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Vinicius Costa Gomes [Tue, 14 Dec 2021 00:39:49 +0000 (16:39 -0800)]
igc: Do not enable crosstimestamping for i225-V models
It was reported that when PCIe PTM is enabled, some lockups could
be observed with some integrated i225-V models.
While the issue is investigated, we can disable crosstimestamp for
those models and see no loss of functionality, because those models
don't have any support for time synchronization.
Fixes:
a90ec8483732 ("igc: Add support for PTP getcrosststamp()")
Link: https://lore.kernel.org/all/924175a188159f4e03bd69908a91e606b574139b.camel@gmx.de/
Reported-by: Stefan Dietrich <roots@gmx.de>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Alex Deucher [Thu, 23 Dec 2021 19:13:02 +0000 (14:13 -0500)]
drm/amdgpu: no DC support for headless chips
Chips with no display hardware should return false for
DC support.
v2: drop Arcturus and Aldebaran
Fixes:
f7f12b25823c0d ("drm/amdgpu: default to true in amdgpu_device_asic_has_dc_support")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reported-by: Tareque Md.Hanif <tarequemd.hanif@yahoo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David S. Miller [Tue, 28 Dec 2021 12:42:46 +0000 (12:42 +0000)]
Merge branch 'smc-fixes'
Dust Li says:
====================
net/smc: fix kernel panic caused by race of smc_sock
This patchset fixes the race between smc_release triggered by
close(2) and cdc_handle triggered by underlaying RDMA device.
The race is caused because the smc_connection may been released
before the pending tx CDC messages got its CQEs. In order to fix
this, I add a counter to track how many pending WRs we have posted
through the smc_connection, and only release the smc_connection
after there is no pending WRs on the connection.
The first patch prevents posting WR on a QP that is not in RTS
state. This patch is needed because if we post WR on a QP that
is not in RTS state, ib_post_send() may success but no CQE will
return, and that will confuse the counter tracking the pending
WRs.
The second patch add a counter to track how many WRs were posted
through the smc_connection, and don't reset the QP on link destroying
to prevent leak of the counter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Dust Li [Tue, 28 Dec 2021 09:03:25 +0000 (17:03 +0800)]
net/smc: fix kernel panic caused by race of smc_sock
A crash occurs when smc_cdc_tx_handler() tries to access smc_sock
but smc_release() has already freed it.
[ 4570.695099] BUG: unable to handle page fault for address:
000000002eae9e88
[ 4570.696048] #PF: supervisor write access in kernel mode
[ 4570.696728] #PF: error_code(0x0002) - not-present page
[ 4570.697401] PGD 0 P4D 0
[ 4570.697716] Oops: 0002 [#1] PREEMPT SMP NOPTI
[ 4570.698228] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.16.0-rc4+ #111
[ 4570.699013] Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS
8c24b4c 04/0
[ 4570.699933] RIP: 0010:_raw_spin_lock+0x1a/0x30
<...>
[ 4570.711446] Call Trace:
[ 4570.711746] <IRQ>
[ 4570.711992] smc_cdc_tx_handler+0x41/0xc0
[ 4570.712470] smc_wr_tx_tasklet_fn+0x213/0x560
[ 4570.712981] ? smc_cdc_tx_dismisser+0x10/0x10
[ 4570.713489] tasklet_action_common.isra.17+0x66/0x140
[ 4570.714083] __do_softirq+0x123/0x2f4
[ 4570.714521] irq_exit_rcu+0xc4/0xf0
[ 4570.714934] common_interrupt+0xba/0xe0
Though smc_cdc_tx_handler() checked the existence of smc connection,
smc_release() may have already dismissed and released the smc socket
before smc_cdc_tx_handler() further visits it.
smc_cdc_tx_handler() |smc_release()
if (!conn) |
|
|smc_cdc_tx_dismiss_slots()
| smc_cdc_tx_dismisser()
|
|sock_put(&smc->sk) <- last sock_put,
| smc_sock freed
bh_lock_sock(&smc->sk) (panic) |
To make sure we won't receive any CDC messages after we free the
smc_sock, add a refcount on the smc_connection for inflight CDC
message(posted to the QP but haven't received related CQE), and
don't release the smc_connection until all the inflight CDC messages
haven been done, for both success or failed ones.
Using refcount on CDC messages brings another problem: when the link
is going to be destroyed, smcr_link_clear() will reset the QP, which
then remove all the pending CQEs related to the QP in the CQ. To make
sure all the CQEs will always come back so the refcount on the
smc_connection can always reach 0, smc_ib_modify_qp_reset() was replaced
by smc_ib_modify_qp_error().
And remove the timeout in smc_wr_tx_wait_no_pending_sends() since we
need to wait for all pending WQEs done, or we may encounter use-after-
free when handling CQEs.
For IB device removal routine, we need to wait for all the QPs on that
device been destroyed before we can destroy CQs on the device, or
the refcount on smc_connection won't reach 0 and smc_sock cannot be
released.
Fixes:
5f08318f617b ("smc: connection data control (CDC)")
Reported-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dust Li [Tue, 28 Dec 2021 09:03:24 +0000 (17:03 +0800)]
net/smc: don't send CDC/LLC message if link not ready
We found smc_llc_send_link_delete_all() sometimes wait
for 2s timeout when testing with RDMA link up/down.
It is possible when a smc_link is in ACTIVATING state,
the underlaying QP is still in RESET or RTR state, which
cannot send any messages out.
smc_llc_send_link_delete_all() use smc_link_usable() to
checks whether the link is usable, if the QP is still in
RESET or RTR state, but the smc_link is in ACTIVATING, this
LLC message will always fail without any CQE entering the
CQ, and we will always wait 2s before timeout.
Since we cannot send any messages through the QP before
the QP enter RTS. I add a wrapper smc_link_sendable()
which checks the state of QP along with the link state.
And replace smc_link_usable() with smc_link_sendable()
in all LLC & CDC message sending routine.
Fixes:
5f08318f617b ("smc: connection data control (CDC)")
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Tue, 28 Dec 2021 12:48:11 +0000 (12:48 +0000)]
NFC: st21nfca: Fix memory leak in device probe and remove
'phy->pending_skb' is alloced when device probe, but forgot to free
in the error handling path and remove path, this cause memory leak
as follows:
unreferenced object 0xffff88800bc06800 (size 512):
comm "8", pid 11775, jiffies
4295159829 (age 9.032s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
00000000d66c09ce>] __kmalloc_node_track_caller+0x1ed/0x450
[<
00000000c93382b3>] kmalloc_reserve+0x37/0xd0
[<
000000005fea522c>] __alloc_skb+0x124/0x380
[<
0000000019f29f9a>] st21nfca_hci_i2c_probe+0x170/0x8f2
Fix it by freeing 'pending_skb' in error and remove.
Fixes:
68957303f44a ("NFC: ST21NFCA: Add driver for STMicroelectronics ST21NFCA NFC Chip")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Aleksander Jan Bajkowski [Mon, 27 Dec 2021 16:22:03 +0000 (17:22 +0100)]
net: lantiq_xrx200: fix statistics of received bytes
Received frames have FCS truncated. There is no need
to subtract FCS length from the statistics.
Fixes:
fe1a56420cf2 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christophe JAILLET [Sun, 26 Dec 2021 17:51:44 +0000 (18:51 +0100)]
net: ag71xx: Fix a potential double free in error handling paths
'ndev' is a managed resource allocated with devm_alloc_etherdev(), so there
is no need to call free_netdev() explicitly or there will be a double
free().
Simplify all error handling paths accordingly.
Fixes:
d51b6ce441d3 ("net: ethernet: add ag71xx driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
wolfgang huang [Tue, 28 Dec 2021 08:01:20 +0000 (16:01 +0800)]
mISDN: change function names to avoid conflicts
As we build for mips, we meet following error. l1_init error with
multiple definition. Some architecture devices usually marked with
l1, l2, lxx as the start-up phase. so we change the mISDN function
names, align with Isdnl2_xxx.
mips-linux-gnu-ld: drivers/isdn/mISDN/layer1.o: in function `l1_init':
(.text+0x890): multiple definition of `l1_init'; \
arch/mips/kernel/bmips_5xxx_init.o:(.text+0xf0): first defined here
make[1]: *** [home/mips/kernel-build/linux/Makefile:1161: vmlinux] Error 1
Signed-off-by: wolfgang huang <huangjinhui@kylinos.cn>
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Evan Quan [Fri, 17 Dec 2021 11:05:06 +0000 (19:05 +0800)]
drm/amdgpu: put SMU into proper state on runpm suspending for BOCO capable platform
By setting mp1_state as PP_MP1_STATE_UNLOAD, MP1 will do some proper cleanups and
put itself into a state ready for PNP. That can workaround some random resuming
failure observed on BOCO capable platforms.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / linux-2.6-microblaze.git / log