git.monstr.eu Git - linux-2.6-microblaze.git/log

igb: Replace GFP_ATOMIC with GFP_KERNEL in igb_sw_init()

igb_sw_init() is never called in atomic context.
It calls kzalloc() and kcalloc() with GFP_ATOMIC, which is not necessary.
GFP_ATOMIC can be replaced with GFP_KERNEL.

This is found by a static analysis tool named DCNS written by myself.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

igb: Use an advanced ctx descriptor for launchtime

On i210, Launchtime (TxTime) requires the usage of an "Advanced
Transmit Context Descriptor" for retrieving the timestamp of a packet.

The igb driver correctly builds such descriptor on the segmentation
flow (i.e. igb_tso()) or on the checksum one (i.e. igb_tx_csum()), but the
feature is broken for AF_PACKET if the IGB_TX_FLAGS_VLAN is not set,
which happens due to an early return on igb_tx_csum().

This flag is only set by the kernel when a VLAN interface is used,
thus we can't just rely on it. Here we are fixing this issue by checking
if launchtime is enabled for the current tx_ring before performing the
early return.

Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

e1000: ensure to free old tx/rx rings in set_ringparam()

In 'e1000_set_ringparam()', the tx_ring and rx_ring are updated with new value
and the old tx/rx rings are freed only when the device is up. There are resource
leaks on old tx/rx rings when the device is not up. This bug is reported by COD,
a tool for testing kernel module binaries I am building.

This patch fixes the bug by always calling 'kfree()' on old tx/rx rings in
'e1000_set_ringparam()'.

Signed-off-by: Bo Chen <chenbo@pdx.edu>
Reviewed-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

e1000: check on netif_running() before calling e1000_up()

When the device is not up, the call to 'e1000_up()' from the error handling path
of 'e1000_set_ringparam()' causes a kernel oops with a null-pointer
dereference. The null-pointer dereference is triggered in function
'e1000_alloc_rx_buffers()' at line 'buffer_info = &rx_ring->buffer_info[i]'.

This bug was reported by COD, a tool for testing kernel module binaries I am
building. This bug was also detected by KFI from Dr. Kai Cong.

This patch fixes the bug by checking on 'netif_running()' before calling
'e1000_up()' in 'e1000_set_ringparam()'.

Signed-off-by: Bo Chen <chenbo@pdx.edu>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgb: use dma_zalloc_coherent instead of allocator/memset

Use dma_zalloc_coherent instead of dma_alloc_coherent
followed by memset 0.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Merge git://git./pub/scm/linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2018-08-24

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix BPF sockmap and tls where we get a hang in do_tcp_sendpages()
   when sndbuf is full due to missing calls into underlying socket's
   sk_write_space(), from John.

2) Two BPF sockmap fixes to reject invalid parameters on map creation
   and to fix a map element miscount on allocation failure. Another fix
   for BPF hash tables to use per hash table salt for jhash(), from Daniel.

3) Fix for bpftool's command line parsing in order to terminate on bad
   arguments instead of keeping looping in some border cases, from Quentin.

4) Fix error value of xdp_umem_assign_dev() in order to comply with
   expected bind ops error codes, from Prashant.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch '100GbE' of git://git./linux/kernel/git/jkirsher/net-queue

Jeff Kirsher says:

====================
Intel Wired LAN Driver Fixes 2018-08-23

This series contains bug fixes to the ice driver.

Anirudh provides several fixes, starting with static analysis fixes by
replacing a bitwise-and with a constant value and replace "magic"
numbers with defines.  Fixed the control queue processing by removing
unnecessary read/writes to registers, as well as getting a accurate
value for "pending".  Added additional checks to avoid NULL pointer
dereferences.  Fixed up code formatting issues, by cleaning up code
comments and coding style.

Bruce cleans up a duplicate check for owner, within the same function.
Also cleans up interrupt causes that are not handled or applicable.
Fix checkpatch warning about the use of bool in structures due to the
wasted space and size of bool, so convert struct members to u8 instead.

Jake fixes a number of potential bugs in the reporting of stats via
ethtool, by simply reporting all the queue statistics, even for the
queues that are not activated.  Fixed a compiler warning, as well as
make the code a bit cleaner but just using order_base_2() for
calculating the power-of-2.

Preethi adds a check to avoid a NULL pointer dereference crash during
initialization.

Brett clarifies the code when it comes to port VLANs and regular VLANs,
by renaming defines and field values to match their intended use and
purpose.

Jesse initializes a variable to avoid garbage values being returned to
the caller.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

ice: Trivial formatting fixes

1) Add missing "\n" when printing link event error message.

2) Update dev_err statement in probe.

3) Add function description for ice_clear_pf_cfg.

4) Fix coding style for ice_acquire_nvm.

5) netdev->mtu is unsigned so use %u.

Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Change struct members from bool to u8

Recent versions of checkpatch have a new warning based on a documented
preference of Linus to not use bool in structures due to wasted space and
the size of bool is implementation dependent. For more information, see
the email thread at https://lkml.org/lkml/2017/11/21/384.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Fix potential return of uninitialized value

In ice_vsi_setup_[tx|rx]_rings, err is uninitialized which can result in
a garbage value return to the caller. Fix that.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Fix a few null pointer dereference issues

1) When ice_ena_msix_range() fails to reserve vectors, a devm_kfree()
warning was seen in the error flow path. So check pf->irq_tracker
before use in ice_clear_interrupt_scheme().

2) In ice_vsi_cfg(), check vsi->netdev before use.

3) In ice_get_link_status, check link_up before use.

Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Update to interrupts enabled in OICR

Remove the following interrupt causes that are not applicable or not
handled:
- PFINT_OICR_HLP_RDY_M
- PFINT_OICR_CPM_RDY_M
- PFINT_OICR_GPIO_M
- PFINT_OICR_STORM_DETECT_M

Add the following interrupt cause that's actually handled in ice_misc_intr:
- PFINT_OICR_PE_CRITERR_M

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

tools: bpftool: return from do_event_pipe() on bad arguments

When command line parsing fails in the while loop in do_event_pipe()
because the number of arguments is incorrect or because the keyword is
unknown, an error message is displayed, but bpftool remains stuck in
the loop. Make sure we exit the loop upon failure.

Fixes: f412eed9dfde ("tools: bpftool: add simple perf event output reader")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

ice: Set VLAN flags correctly

In the struct ice_aqc_vsi_props the field port_vlan_flags is an
overloaded term because it is used for both port VLANs (PVLANs) and
regular VLANs. This is an issue and is very confusing especially when
dealing with VFs because normal VLANs and port VLANs are not the same.
To fix this the field was renamed to vlan_flags and all of the #define's
labeled *_PVLAN_* were renamed to *_VLAN_* if they are not specific to
port VLANs.

Also in ice_vsi_manage_vlan_stripping, set the ICE_AQ_VSI_VLAN_MODE_ALL
bit to allow the driver to add a VLAN tag to all packets it sends.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Use order_base_2 to calculate higher power of 2

Currently, we use a combination of ilog2 and is_power_of_2() to
calculate the next power of 2 for the qcount. This appears to be causing
a warning on some combinations of GCC and the Linux kernel:

MODPOST 1 modules
WARNING: "____ilog2_NaN" [ice.ko] undefined!

This appears to because because GCC realizes that qcount could be zero
in some circumstances and thus attempts to link against the
intentionally undefined ___ilog2_NaN function.

The order_base_2 function is intentionally defined to return 0 when
passed 0 as an argument, and thus will be safe to use here.

This not only fixes the warning but makes the resulting code slightly
cleaner, and is really what we should have used originally.

Also update the comment to make it more clear that we are rounding up,
not just incrementing the ilog2 of qcount unconditionally.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Fix bugs in control queue processing

This patch is a consolidation of multiple bug fixes for control queue
processing.

1)  In ice_clean_adminq_subtask() remove unnecessary reads/writes to
    registers. The bits PFINT_FW_CTL, PFINT_MBX_CTL and PFINT_SB_CTL
    are not set when an interrupt arrives, which means that clearing them
    again can be omitted.

2)  Get an accurate value in "pending" by re-reading the control queue
    head register from the hardware.

3)  Fix a corner case involving lost control queue messages by checking
    for new control messages (using ice_ctrlq_pending) before exiting the
    cleanup routine.

Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Clean control queues only when they are initialized

Clean control queues only when they are initialized. One of the ways to
validate if the basic initialization is done is by checking value of
cq->sq.head and cq->rq.head variables that specify the register address.
This patch adds a check to avoid NULL pointer dereference crash when tried
to shutdown uninitialized control queue.

Signed-off-by: Preethi Banala <preethi.banala@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Report stats for allocated queues via ethtool stats

It is not safe to have the string table for statistics change order or
size over the lifetime of a given netdevice. This is because of the
nature of the 3-step process for obtaining stats. First, user space
performs a request for the size of the strings table. Second it performs
a separate request for the strings themselves, after allocating space
for the table. Third, it requests the stats themselves, also allocating
space for the table.

If the size decreased, there is potential to see garbage data or stats
values. In the worst case, we could potentially see stats values become
mis-aligned with their strings, so that it looks like a statistic is
being reported differently than it actually is.

Even worse, if the size increased, there is potential that the strings
table or stats table was not allocated large enough and the stats code
could access and write to memory it should not, potentially resulting in
undefined behavior and system crashes.

It isn't even safe if the size always changes under the RTNL lock. This
is because the calls take place over multiple user space commands, so it
is not possible to hold the RTNL lock for the entire duration of
obtaining strings and stats. Further, not all consumers of the ethtool
API are the user space ethtool program, and it is possible that one
assumes the strings will not change (valid under the current contract),
and thus only requests the stats values when requesting stats in a loop.

Finally, it's not possible in the general case to detect when the size
changes, because it is quite possible that one value which could impact
the stat size increased, while another decreased. This would result in
the same total number of stats, but reordering them so that stats no
longer line up with the strings they belong to. Since only size changes
aren't enough, we would need some sort of hash or token to determine
when the strings no longer match. This would require extending the
ethtool stats commands, but there is no more space in the relevant
structures.

The real solution to resolve this would be to add a completely new API
for stats, probably over netlink.

In the ice driver, the only thing impacting the stats that is not
constant is the number of queues. Instead of reporting stats for each
used queue, report stats for each allocated queue. We do not change the
number of queues allocated for a given netdevice, as we pass this into
the alloc_etherdev_mq() function to set the num_tx_queues and
num_rx_queues.

This resolves the potential bugs at the slight cost of displaying many
queue statistics which will not be activated.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Cleanup magic number

Use define for the unit size shift of the Rx LAN context descriptor base
address instead of the magic number 7.

Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

bpf: use per htab salt for bucket hash

All BPF hash and LRU maps currently have a known and global seed
we feed into jhash() which is 0. This is suboptimal, thus fix it
by generating a random seed upon hashtab setup time which we can
later on feed into jhash() on lookup, update and deletions.

Fixes: 0f8e4bd8a1fc8 ("bpf: add hashtable type of eBPF maps")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Eduardo Valentin <eduval@amazon.com>

ice: Remove unnecessary node owner check

There is already a check for owner == ICE_SCHED_NODE_OWNER_LAN at the
beginning of ice_sched_update_vsi_child_nodes. Remove the additional
check to address the static analysis tool smatch issue "warn: we tested
'owner' before and it was 'false'".

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Fix multiple static analyser warnings

This patch fixes the following smatch errors:

1) Fix "odd binop '0x0 & 0xc'" when performing the bitwise-and with a
   constant value of zero (ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_128_FLAG).
   Remove a similar bitwise-and with 0 in ice_add_marker_act() and use the
   right mask ICE_LG_ACT_GENERIC_OFFSET_M in the expression.

2) Fix a similar issue "odd binop '0x0 & 0x1800' in ice_req_irq_msix_misc.

3) Fix "odd binop '0x380000 & 0x7fff8'" in ice_add_marker_act(). Also, use
   a new define ICE_LG_ACT_GENERIC_OFF_RX_DESC_PROF_IDX instead of magic
   number '7'.

4) Fix warn: odd binop '0x0 & 0x18' in ice_set_dflt_vsi_ctx() by removing
   unnecessary logic to explicitly unset bits 3 and 4 in port_vlan_bits.
   These bits are unset already by the memset on ctxt->info.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Merge branch 'for-upstream' of git://git./linux/kernel/git/bluetooth/bluetooth

Johan Hedberg says:

====================
pull request: bluetooth 2018-08-23

Here are two important Bluetooth fixes for the MediaTek and RealTek HCI
drivers.

Please let me know if there are any issues pulling, thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'hns3-fixes'

Huazhong Tan says:

====================
net: hns3: bug fix & optimization for HNS3 driver

This patchset presents a bug fix found out when CONFIG_ARM64_64K_PAGES
enable and an optimization for HNS3 driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: modify variable type in hns3_nic_reuse_page

'truesize' is supposed to be u32, not int, so fix it.

Signed-off-by: Huazhong tan <tanhuazhong@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: fix page_offset overflow when CONFIG_ARM64_64K_PAGES

When enable the config item "CONFIG_ARM64_64K_PAGES", the size of
PAGE_SIZE is 65536(64K). But the type of page_offset is u16, it will
overflow. So change it to u32, when "CONFIG_ARM64_64K_PAGES" enabled.

Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/ipv6: init ip6 anycast rt->dst.input as ip6_input

Commit 6edb3c96a5f02 ("net/ipv6: Defer initialization of dst to data path")
forgot to handle anycast route and init anycast rt->dst.input to ip6_forward.
Fix it by setting anycast rt->dst.input back to ip6_input.

Fixes: 6edb3c96a5f02 ("net/ipv6: Defer initialization of dst to data path")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'hns-fixes'

Huazhong Tan says:

====================
net: hns: bug fixes & optimization for HNS driver

This patchset presents some bug fixes found out when CONFIG_ARM64_64K_PAGES
enable and an optimization for HNS driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns: use eth_get_headlen interface instead of hns_nic_get_headlen

Update hns to drop the hns_nic_get_headlen function in favour of
eth_get_headlen, and hence also removes now redundant hns_nic_get_headlen.

Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns: fix skb->truesize underestimation

skb->truesize is not meant to be tracking amount of used bytes in a skb,
but amount of reserved/consumed bytes in memory.

For instance, if we use a single byte in last page fragment, we have to
account the full size of the fragment.

So skb_add_rx_frag needs to calculate the length of the entire buffer into
turesize.

Fixes: 9cbe9fd5214e ("net: hns: optimize XGE capability by reducing cpu usage")
Signed-off-by: Huazhong tan <tanhuazhong@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns: modify variable type in hns_nic_reuse_page

'truesize' is supposed to be u32, not int, so fix it.

Signed-off-by: Huazhong tan <tanhuazhong@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns: fix length and page_offset overflow when CONFIG_ARM64_64K_PAGES

When enable the config item "CONFIG_ARM64_64K_PAGES", the size of PAGE_SIZE
is 65536(64K). But the type of length and page_offset are u16, they will
overflow. So change them to u32.

Fixes: 6fe6611ff275 ("net: add Hisilicon Network Subsystem hnae framework support")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'tcp_bbr-PROBE_RTT-minor-bug-fixes'

Kevin Yang says:

====================
tcp_bbr: PROBE_RTT minor bug fixes

This series includes two minor bug fixes for the TCP BBR PROBE_RTT
mechanism, and one preparatory patch:

(1) A preparatory patch to reorganize the PROBE_RTT logic by refactoring
    (into its own function) the code to exit PROBE_RTT, since the next
    patch will be using that code in a new context.

(2) Fix: When BBR restarts from idle and if BBR is in PROBE_RTT mode,
    BBR should check if it's time to exit PROBE_RTT. If yes, then BBR
    should exit PROBE_RTT mode and restore the cwnd to its full value.

(3) Fix: Apply the PROBE_RTT cwnd cap even if the count of fully-ACKed
    packets is 0.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

tcp_bbr: apply PROBE_RTT cwnd cap even if acked==0

This commit fixes a corner case where TCP BBR would enter PROBE_RTT
mode but not reduce its cwnd. If a TCP receiver ACKed less than one
full segment, the number of delivered/acked packets was 0, so that
bbr_set_cwnd() would short-circuit and exit early, without cutting
cwnd to the value we want for PROBE_RTT.

The fix is to instead make sure that even when 0 full packets are
ACKed, we do apply all the appropriate caps, including the cap that
applies in PROBE_RTT mode.

Fixes: 0f8782ea1497 ("tcp_bbr: add BBR congestion control")
Signed-off-by: Kevin Yang <yyd@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp_bbr: in restart from idle, see if we should exit PROBE_RTT

This patch fix the case where BBR does not exit PROBE_RTT mode when
it restarts from idle. When BBR restarts from idle and if BBR is in
PROBE_RTT mode, BBR should check if it's time to exit PROBE_RTT. If
yes, then BBR should exit PROBE_RTT mode and restore the cwnd to its
full value.

Fixes: 0f8782ea1497 ("tcp_bbr: add BBR congestion control")
Signed-off-by: Kevin Yang <yyd@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp_bbr: add bbr_check_probe_rtt_done() helper

This patch add a helper function bbr_check_probe_rtt_done() to
1. check the condition to see if bbr should exit probe_rtt mode;
2. process the logic of exiting probe_rtt mode.

Fixes: 0f8782ea1497 ("tcp_bbr: add BBR congestion control")
Signed-off-by: Kevin Yang <yyd@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: tcp: send zero IPID for RST and ACK sent in SYN-RECV and TIME-WAIT state

tcp uses per-cpu (and per namespace) sockets (net->ipv4.tcp_sk) internally
to send some control packets.

1) RST packets, through tcp_v4_send_reset()
2) ACK packets in SYN-RECV and TIME-WAIT state, through tcp_v4_send_ack()

These packets assert IP_DF, and also use the hashed IP ident generator
to provide an IPv4 ID number.

Geoff Alexander reported this could be used to build off-path attacks.

These packets should not be fragmented, since their size is smaller than
IPV4_MIN_MTU. Only some tunneled paths could eventually have to fragment,
regardless of inner IPID.

We really can use zero IPID, to address the flaw, and as a bonus,
avoid a couple of atomic operations in ip_idents_reserve()

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Geoff Alexander <alexandg@cs.unm.edu>
Tested-by: Geoff Alexander <alexandg@cs.unm.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

addrconf: reduce unnecessary atomic allocations

All the 3 callers of addrconf_add_mroute() assert RTNL
lock, they don't take any additional lock either, so
it is safe to convert it to GFP_KERNEL.

Same for sit_add_v4_addrs().

Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net_sched: fix unused variable warning in stmmac

The new tcf_exts_for_each_action() macro doesn't reference its
arguments when CONFIG_NET_CLS_ACT is disabled, which leads to
a harmless warning in at least one driver:

drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c: In function 'tc_fill_actions':
drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c:64:6: error: unused variable 'i' [-Werror=unused-variable]

Adding a cast to void lets us avoid this kind of warning.
To be on the safe side, do it for all three arguments, not
just the one that caused the warning.

Fixes: 244cd96adb5f ("net_sched: remove list_head from tc_action")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

sch_cake: Fix TC filter flow override and expand it to hosts as well

The TC filter flow mapping override completely skipped the call to
cake_hash(); however that meant that the internal state was not being
updated, which ultimately leads to deadlocks in some configurations. Fix
that by passing the overridden flow ID into cake_hash() instead so it can
react appropriately.

In addition, the major number of the class ID can now be set to override
the host mapping in host isolation mode. If both host and flow are
overridden (or if the respective modes are disabled), flow dissection and
hashing will be skipped entirely; otherwise, the hashing will be kept for
the portions that are not set by the filter.

Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/ncsi: Fixup .dumpit message flags and ID check in Netlink handler

The ncsi_pkg_info_all_nl() .dumpit handler is missing the NLM_F_MULTI
flag, causing additional package information after the first to be lost.
Also fixup a sanity check in ncsi_write_package_info() to reject out of
range package IDs.

Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: renesas: use SPDX identifier for Renesas drivers

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

bpf: sockmap: write_space events need to be passed to TCP handler

When sockmap code is using the stream parser it also handles the write
space events in order to handle the case where (a) verdict redirects
skb to another socket and (b) the sockmap then sends the skb but due
to memory constraints (or other EAGAIN errors) needs to do a retry.

But the initial code missed a third case where the
skb_send_sock_locked() triggers an sk_wait_event(). A typically case
would be when sndbuf size is exceeded. If this happens because we
do not pass the write_space event to the lower layers we never wake
up the event and it will wait for sndtimeo. Which as noted in ktls
fix may be rather large and look like a hang to the user.

To reproduce the best test is to reduce the sndbuf size and send
1B data chunks to stress the memory handling. To fix this pass the
event from the upper layer to the lower layer.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

tls: possible hang when do_tcp_sendpages hits sndbuf is full case

Currently, the lower protocols sk_write_space handler is not called if
TLS is sending a scatterlist via tls_push_sg. However, normally
tls_push_sg calls do_tcp_sendpage, which may be under memory pressure,
that in turn may trigger a wait via sk_wait_event. Typically, this
happens when the in-flight bytes exceed the sdnbuf size. In the normal
case when enough ACKs are received sk_write_space() will be called and
the sk_wait_event will be woken up allowing it to send more data
and/or return to the user.

But, in the TLS case because the sk_write_space() handler does not
wake up the events the above send will wait until the sndtimeo is
exceeded. By default this is MAX_SCHEDULE_TIMEOUT so it look like a
hang to the user (especially this impatient user). To fix this pass
the sk_write_space event to the lower layers sk_write_space event
which in the TCP case will wake any pending events.

I observed the above while integrating sockmap and ktls. It
initially appeared as test_sockmap (modified to use ktls) occasionally
hanging. To reliably reproduce this reduce the sndbuf size and stress
the tls layer by sending many 1B sends. This results in every byte
needing a header and each byte individually being sent to the crypto
layer.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

bpf, sockmap: fix sock hash count in alloc_sock_hash_elem

When we try to allocate a new sock hash entry and the allocation
fails, then sock hash map fails to reduce the map element counter,
meaning we keep accounting this element although it was never used.
Fix it by dropping the element counter on error.

Fixes: 81110384441a ("bpf: sockmap, add hash map support")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>

bpf, sockmap: fix sock_hash_alloc and reject zero-sized keys

Currently, it is possible to create a sock hash map with key size
of 0 and have the kernel return a fd back to user space. This is
invalid for hash maps (and kernel also hasn't been tested for zero
key size support in general at this point). Thus, reject such
configuration.

Fixes: 81110384441a ("bpf: sockmap, add hash map support")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>

xsk: fix return value of xdp_umem_assign_dev()

s/ENOTSUPP/EOPNOTSUPP/ in function umem_assign_dev().
This function's return value is directly returned by xsk_bind().
EOPNOTSUPP is bind()'s possible return value.

Fixes: f734607e819b ("xsk: refactor xdp_umem_assign_dev()")
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Merge branch 'net_sched-fixes'

Cong Wang says:

====================
net_sched: pending clean up and bug fixes

This patchset aims to clean up and fixes some bugs in current
merge window, this is why it is targeting -net.

Patch 1-5 are clean up Vlad's patches merged in current merge
window, patch 6 is just a trivial cleanup.

Patch 7 reverts a lockdep warning fix and patch 8 provides a better
fix for it.

Patch 9 fixes a potential deadlock found by me during code review.

Please see each patch for details.
====================

Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>

act_ife: fix a potential deadlock

use_all_metadata() acquires read_lock(&ife_mod_lock), then calls
add_metainfo() which calls find_ife_oplist() which acquires the same
lock again. Deadlock!

Introduce __add_metainfo() which accepts struct tcf_meta_ops *ops
as an additional parameter and let its callers to decide how
to find it. For use_all_metadata(), it already has ops, no
need to find it again, just call __add_metainfo() directly.

And, as ife_mod_lock is only needed for find_ife_oplist(),
this means we can make non-atomic allocation for populate_metalist()
now.

Fixes: 817e9f2c5c26 ("act_ife: acquire ife_mod_lock before reading ifeoplist")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

act_ife: move tcfa_lock down to where necessary

The only time we need to take tcfa_lock is when adding
a new metainfo to an existing ife->metalist. We don't need
to take tcfa_lock so early and so broadly in tcf_ife_init().

This means we can always take ife_mod_lock first, avoid the
reverse locking ordering warning as reported by Vlad.

Reported-by: Vlad Buslov <vladbu@mellanox.com>
Tested-by: Vlad Buslov <vladbu@mellanox.com>
Cc: Vlad Buslov <vladbu@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Revert "net: sched: act_ife: disable bh when taking ife_mod_lock"

This reverts commit 42c625a486f3 ("net: sched: act_ife: disable bh
when taking ife_mod_lock"), because what ife_mod_lock protects
is absolutely not touched in rate est timer BH context, they have
no race.

A better fix is following up.

Cc: Vlad Buslov <vladbu@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net_sched: remove unused tcfa_capab

Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net_sched: remove list_head from tc_action

After commit 90b73b77d08e, list_head is no longer needed.
Now we just need to convert the list iteration to array
iteration for drivers.

Fixes: 90b73b77d08e ("net: sched: change action API to use array of pointers to actions")
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net_sched: remove unused tcf_idr_check()

tcf_idr_check() is replaced by tcf_idr_check_alloc(),
and __tcf_idr_check() now can be folded into tcf_idr_search().

Fixes: 0190c1d452a9 ("net: sched: atomically check-allocate action")
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net_sched: remove unused parameter for tcf_action_delete()

Fixes: 16af6067392c ("net: sched: implement reference counted action release")
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net_sched: remove unnecessary ops->delete()

All ops->delete() wants is getting the tn->idrinfo, but we already
have tc_action before calling ops->delete(), and tc_action has
a pointer ->idrinfo.

More importantly, each type of action does the same thing, that is,
just calling tcf_idr_delete_index().

So it can be just removed.

Fixes: b409074e6693 ("net: sched: add 'delete' function to action ops")
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net_sched: improve and refactor tcf_action_put_many()

tcf_action_put_many() is mostly called to clean up actions on
failure path, but tcf_action_put_many(&actions[acts_deleted]) is
used in the ugliest way: it passes a slice of the array and
uses an additional NULL at the end to avoid out-of-bound
access.

acts_deleted is completely unnecessary since we can teach
tcf_action_put_many() scan the whole array and checks against
NULL pointer. Which also means tcf_action_delete() should
set deleted action pointers to NULL to avoid double free.

Fixes: 90b73b77d08e ("net: sched: change action API to use array of pointers to actions")
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

hv_netvsc: ignore devices that are not PCI

Registering another device with same MAC address (such as TAP, VPN or
DPDK KNI) will confuse the VF autobinding logic. Restrict the search
to only run if the device is known to be a PCI attached VF.

Fixes: e8ff40d4bff1 ("hv_netvsc: improve VF device matching")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rds: tcp: remove duplicated include from tcp.c

Remove duplicated include.

Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sch_cake: Remove unused including <linux/version.h>

Remove including <linux/version.h> that don't need it.

Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Bluetooth: mediatek: Fix memory leak

In case memory resources for *fw* were allocated, release them before
return.

Addresses-Coverity-ID: 1472611 ("Resource leak")
Fixes: 7237c4c9ec92 ("Bluetooth: mediatek: Add protocol support for MediaTek serial devices")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

Bluetooth: Make BT_HCIUART_RTL configuration option depend on ACPI

At the moment we only support ACPI enumeration for serial port attached
RTL bluetooth controllers.

This commit adds a dependency on ACPI to the BT_HCIUART_RTL configuration
option, fixing the following warning when ACPI is not enabled:

drivers/bluetooth/hci_h5.c:920:22: warning: 'rtl_vnd' defined but not used

Cc: Arnd Bergmann <arnd@arndb.de>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

rhashtable: remove duplicated include from rhashtable.c

Remove duplicated include.

Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/ipv6: Put lwtstate when destroying fib6_info

Prior to the introduction of fib6_info lwtstate was managed by the dst
code. With fib6_info releasing lwtstate needs to be done when the struct
is freed.

Fixes: 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

r8152: disable RX aggregation on new Dell TB16 dock

There's a new Dell TB16 dock with a different iSerialNumber.

Apply the same fix from commit 0b1655143df0 ("r8152: disable RX
aggregation on Dell TB16 dock") to this model.

BugLink: https://bugs.launchpad.net/bugs/1785780
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'qed-Misc-fixes-in-the-interface-with-the-MFW'

Tomer Tayar says:

====================
qed: Misc fixes in the interface with the MFW

This patch series fixes several issues in the driver's interface with the
management FW (MFW).

v1->v2:
- Fix loop counter decrement to be pre instead of post.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

qed: Avoid sending mailbox commands when MFW is not responsive

Keep sending mailbox commands to the MFW when it is not responsive ends up
with a redundant amount of timeout expiries.
This patch prints the MCP status on the first command which is not
responded, and blocks the following commands.
Since the (un)load request commands might be not responded due to other
PFs, the patch also adds the option to skip the blocking upon a failure.

Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qed: Prevent a possible deadlock during driver load and unload

The MFW manages an internal lock to prevent concurrent hardware
(de)initialization of different PFs.
This, together with the busy-waiting for the MFW's responses for commands,
might lead to a deadlock during concurrent load or unload of PFs.
This patch adds the option to sleep within the busy-waiting, and uses it
for the (un)load requests (which are not sent from an interrupt context) to
prevent the possible deadlock.

Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qed: Wait for MCP halt and resume commands to take place

Successive iterations of halting and resuming the management chip (MCP)
might fail, since currently the driver doesn't wait for these operations to
actually take place.
This patch prevents the driver from moving forward before the operations
are reflected in the state register.

Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qed: Wait for ready indication before rereading the shmem

The MFW might be reset and re-update its shared memory.
Upon the detection of such a reset the driver rereads this memory, but it
has to wait till the data is valid.
This patch adds the missing wait for a data ready indication.

Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip6_vti: fix a null pointer deference when destroy vti6 tunnel

If load ip6_vti module and create a network namespace when set
fb_tunnels_only_for_init_net to 1, then exit the namespace will
cause following crash:

[ 6601.677036] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[ 6601.679057] PGD 8000000425eca067 P4D 8000000425eca067 PUD 424292067 PMD 0
[ 6601.680483] Oops: 0000 [#1] SMP PTI
[ 6601.681223] CPU: 7 PID: 93 Comm: kworker/u16:1 Kdump: loaded Tainted: G            E     4.18.0+ #3
[ 6601.683153] Hardware name: Fedora Project OpenStack Nova, BIOS seabios-1.7.5-11.el7 04/01/2014
[ 6601.684919] Workqueue: netns cleanup_net
[ 6601.685742] RIP: 0010:vti6_exit_batch_net+0x87/0xd0 [ip6_vti]
[ 6601.686932] Code: 7b 08 48 89 e6 e8 b9 ea d3 dd 48 8b 1b 48 85 db 75 ec 48 83 c5 08 48 81 fd 00 01 00 00 75 d5 49 8b 84 24 08 01 00 00 48 89 e6 <48> 8b 78 08 e8 90 ea d3 dd 49 8b 45 28 49 39 c6 4c 8d 68 d8 75 a1
[ 6601.690735] RSP: 0018:ffffa897c2737de0 EFLAGS: 00010246
[ 6601.691846] RAX: 0000000000000000 RBX: 0000000000000000 RCX: dead000000000200
[ 6601.693324] RDX: 0000000000000015 RSI: ffffa897c2737de0 RDI: ffffffff9f2ea9e0
[ 6601.694824] RBP: 0000000000000100 R08: 0000000000000000 R09: 0000000000000000
[ 6601.696314] R10: 0000000000000001 R11: 0000000000000000 R12: ffff8dc323c07e00
[ 6601.697812] R13: ffff8dc324a63100 R14: ffffa897c2737e30 R15: ffffa897c2737e30
[ 6601.699345] FS:  0000000000000000(0000) GS:ffff8dc33fdc0000(0000) knlGS:0000000000000000
[ 6601.701068] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6601.702282] CR2: 0000000000000008 CR3: 0000000424966002 CR4: 00000000001606e0
[ 6601.703791] Call Trace:
[ 6601.704329]  cleanup_net+0x1b4/0x2c0
[ 6601.705268]  process_one_work+0x16c/0x370
[ 6601.706145]  worker_thread+0x49/0x3e0
[ 6601.706942]  kthread+0xf8/0x130
[ 6601.707626]  ? rescuer_thread+0x340/0x340
[ 6601.708476]  ? kthread_bind+0x10/0x10
[ 6601.709266]  ret_from_fork+0x35/0x40

Reproduce:
modprobe ip6_vti
echo 1 > /proc/sys/net/core/fb_tunnels_only_for_init_net
unshare -n
exit

This because ip6n->tnls_wc[0] point to fallback device in default, but
in non-default namespace, ip6n->tnls_wc[0] will be NULL, so add the NULL
check comparatively.

Fixes: e2948e5af8ee ("ip6_vti: fix creating fallback tunnel device for vti6")
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

1) Fix races in IPVS, from Tan Hu.

2) Missing unbind in matchall classifier, from Hangbin Liu.

3) Missing act_ife action release, from Vlad Buslov.

4) Cure lockdep splats in ila, from Cong Wang.

5) veth queue leak on link delete, from Toshiaki Makita.

6) Disable isdn's IIOCDBGVAR ioctl, it exposes kernel addresses. From
    Kees Cook.

7) RCU usage fixup in XDP, from Tariq Toukan.

8) Two TCP ULP fixes from Daniel Borkmann.

9) r8169 needs REALTEK_PHY as a Kconfig dependency, from Heiner
    Kallweit.

10) Always take tcf_lock with BH disabled, otherwise we can deadlock
    with rate estimator code paths. From Vlad Buslov.

11) Don't use MSI-X on RTL8106e r8169 chips, they don't resume properly.
    From Jian-Hong Pan.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits)
  ip6_vti: fix creating fallback tunnel device for vti6
  ip_vti: fix a null pointer deferrence when create vti fallback tunnel
  r8169: don't use MSI-X on RTL8106e
  net: lan743x_ptp: convert to ktime_get_clocktai_ts64
  net: sched: always disable bh when taking tcf_lock
  ip6_vti: simplify stats handling in vti6_xmit
  bpf: fix redirect to map under tail calls
  r8169: add missing Kconfig dependency
  tools/bpf: fix bpf selftest test_cgroup_storage failure
  bpf, sockmap: fix sock_map_ctx_update_elem race with exist/noexist
  bpf, sockmap: fix map elem deletion race with smap_stop_sock
  bpf, sockmap: fix leakage of smap_psock_map_entry
  tcp, ulp: fix leftover icsk_ulp_ops preventing sock from reattach
  tcp, ulp: add alias for all ulp modules
  bpf: fix a rcu usage warning in bpf_prog_array_copy_core()
  samples/bpf: all XDP samples should unload xdp/bpf prog on SIGTERM
  net/xdp: Fix suspicious RCU usage warning
  net/mlx5e: Delete unneeded function argument
  Documentation: networking: ti-cpsw: correct cbs parameters for Eth1 100Mb
  isdn: Disable IIOCDBGVAR
  ...

ip6_vti: fix creating fallback tunnel device for vti6

When set fb_tunnels_only_for_init_net to 1, don't create fallback tunnel
device for vti6 when a new namespace is created.

Tested:
[root@builder2 ~]# modprobe ip6_tunnel
[root@builder2 ~]# modprobe ip6_vti
[root@builder2 ~]# echo 1 > /proc/sys/net/core/fb_tunnels_only_for_init_net
[root@builder2 ~]# unshare -n
[root@builder2 ~]# ip link
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN mode DEFAULT group
default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip_vti: fix a null pointer deferrence when create vti fallback tunnel

After set fb_tunnels_only_for_init_net to 1, the itn->fb_tunnel_dev will
be NULL and will cause following crash:

[ 2742.849298] BUG: unable to handle kernel NULL pointer dereference at 0000000000000941
[ 2742.851380] PGD 800000042c21a067 P4D 800000042c21a067 PUD 42aaed067 PMD 0
[ 2742.852818] Oops: 0002 [#1] SMP PTI
[ 2742.853570] CPU: 7 PID: 2484 Comm: unshare Kdump: loaded Not tainted 4.18.0-rc8+ #2
[ 2742.855163] Hardware name: Fedora Project OpenStack Nova, BIOS seabios-1.7.5-11.el7 04/01/2014
[ 2742.856970] RIP: 0010:vti_init_net+0x3a/0x50 [ip_vti]
[ 2742.858034] Code: 90 83 c0 48 c7 c2 20 a1 83 c0 48 89 fb e8 6e 3b f6 ff 85 c0 75 22 8b 0d f4 19 00 00 48 8b 93 00 14 00 00 48 8b 14 ca 48 8b 12 <c6> 82 41 09 00 00 04 c6 82 38 09 00 00 45 5b c3 66 0f 1f 44 00 00
[ 2742.861940] RSP: 0018:ffff9be28207fde0 EFLAGS: 00010246
[ 2742.863044] RAX: 0000000000000000 RBX: ffff8a71ebed4980 RCX: 0000000000000013
[ 2742.864540] RDX: 0000000000000000 RSI: 0000000000000013 RDI: ffff8a71ebed4980
[ 2742.866020] RBP: ffff8a71ea717000 R08: ffffffffc083903c R09: ffff8a71ea717000
[ 2742.867505] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a71ebed4980
[ 2742.868987] R13: 0000000000000013 R14: ffff8a71ea5b49c0 R15: 0000000000000000
[ 2742.870473] FS:  00007f02266c9740(0000) GS:ffff8a71ffdc0000(0000) knlGS:0000000000000000
[ 2742.872143] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2742.873340] CR2: 0000000000000941 CR3: 000000042bc20006 CR4: 00000000001606e0
[ 2742.874821] Call Trace:
[ 2742.875358]  ops_init+0x38/0xf0
[ 2742.876078]  setup_net+0xd9/0x1f0
[ 2742.876789]  copy_net_ns+0xb7/0x130
[ 2742.877538]  create_new_namespaces+0x11a/0x1d0
[ 2742.878525]  unshare_nsproxy_namespaces+0x55/0xa0
[ 2742.879526]  ksys_unshare+0x1a7/0x330
[ 2742.880313]  __x64_sys_unshare+0xe/0x20
[ 2742.881131]  do_syscall_64+0x5b/0x180
[ 2742.881933]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reproduce:
echo 1 > /proc/sys/net/core/fb_tunnels_only_for_init_net
modprobe ip_vti
unshare -n

Fixes: 79134e6ce2c9 ("net: do not create fallback tunnels for non-default namespaces")
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

r8169: don't use MSI-X on RTL8106e

Found the ethernet network on ASUS X441UAR doesn't come back on resume
from suspend when using MSI-X.  The chip is RTL8106e - version 39.

[   21.848357] libphy: r8169: probed
[   21.848473] r8169 0000:02:00.0 eth0: RTL8106e, 0c:9d:92:32:67:b4, XID
44900000, IRQ 127
[   22.518860] r8169 0000:02:00.0 enp2s0: renamed from eth0
[   29.458041] Generic PHY r8169-200:00: attached PHY driver [Generic
PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
[   63.227398] r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full -
flow control off
[  124.514648] Generic PHY r8169-200:00: attached PHY driver [Generic
PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)

Here is the ethernet controller in detail:

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136]
(rev 07)
Subsystem: ASUSTeK Computer Inc. RTL810xE PCI Express Fast
Ethernet controller [1043:200f]
Flags: bus master, fast devsel, latency 0, IRQ 16
I/O ports at e000 [size=256]
Memory at ef100000 (64-bit, non-prefetchable) [size=4K]
Memory at e0000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169

Falling back to MSI fixes the issue.

Fixes: 6c6aa15fdea5 ("r8169: improve interrupt handling")
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: lan743x_ptp: convert to ktime_get_clocktai_ts64

timekeeping_clocktai64() has been renamed to ktime_get_clocktai_ts64()
for consistency with the other ktime_get_* access functions.

Rename the new caller that has come up as well.

Question: this is the only ptp driver that sets the hardware time
to the current system time in TAI. Why does it do that?

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sched: always disable bh when taking tcf_lock

Recently, ops->init() and ops->dump() of all actions were modified to
always obtain tcf_lock when accessing private action state. Actions that
don't depend on tcf_lock for synchronization with their data path use
non-bh locking API. However, tcf_lock is also used to protect rate
estimator stats in softirq context by timer callback.

Change ops->init() and ops->dump() of all actions to disable bh when using
tcf_lock to prevent deadlock reported by following lockdep warning:

[  105.470398] ================================
[  105.475014] WARNING: inconsistent lock state
[  105.479628] 4.18.0-rc8+ #664 Not tainted
[  105.483897] --------------------------------
[  105.488511] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[  105.494871] swapper/16/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
[  105.500449] 00000000f86c012e (&(&p->tcfa_lock)->rlock){+.?.}, at: est_fetch_counters+0x3c/0xa0
[  105.509696] {SOFTIRQ-ON-W} state was registered at:
[  105.514925]   _raw_spin_lock+0x2c/0x40
[  105.519022]   tcf_bpf_init+0x579/0x820 [act_bpf]
[  105.523990]   tcf_action_init_1+0x4e4/0x660
[  105.528518]   tcf_action_init+0x1ce/0x2d0
[  105.532880]   tcf_exts_validate+0x1d8/0x200
[  105.537416]   fl_change+0x55a/0x268b [cls_flower]
[  105.542469]   tc_new_tfilter+0x748/0xa20
[  105.546738]   rtnetlink_rcv_msg+0x56a/0x6d0
[  105.551268]   netlink_rcv_skb+0x18d/0x200
[  105.555628]   netlink_unicast+0x2d0/0x370
[  105.559990]   netlink_sendmsg+0x3b9/0x6a0
[  105.564349]   sock_sendmsg+0x6b/0x80
[  105.568271]   ___sys_sendmsg+0x4a1/0x520
[  105.572547]   __sys_sendmsg+0xd7/0x150
[  105.576655]   do_syscall_64+0x72/0x2c0
[  105.580757]   entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  105.586243] irq event stamp: 489296
[  105.590084] hardirqs last  enabled at (489296): [<ffffffffb507e639>] _raw_spin_unlock_irq+0x29/0x40
[  105.599765] hardirqs last disabled at (489295): [<ffffffffb507e745>] _raw_spin_lock_irq+0x15/0x50
[  105.609277] softirqs last  enabled at (489292): [<ffffffffb413a6a3>] irq_enter+0x83/0xa0
[  105.618001] softirqs last disabled at (489293): [<ffffffffb413a800>] irq_exit+0x140/0x190
[  105.626813]
               other info that might help us debug this:
[  105.633976]  Possible unsafe locking scenario:

[  105.640526]        CPU0
[  105.643325]        ----
[  105.646125]   lock(&(&p->tcfa_lock)->rlock);
[  105.650747]   <Interrupt>
[  105.653717]     lock(&(&p->tcfa_lock)->rlock);
[  105.658514]
                *** DEADLOCK ***

[  105.665349] 1 lock held by swapper/16/0:
[  105.669629]  #0: 00000000a640ad99 ((&est->timer)){+.-.}, at: call_timer_fn+0x10b/0x550
[  105.678200]
               stack backtrace:
[  105.683194] CPU: 16 PID: 0 Comm: swapper/16 Not tainted 4.18.0-rc8+ #664
[  105.690249] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[  105.698626] Call Trace:
[  105.701421]  <IRQ>
[  105.703791]  dump_stack+0x92/0xeb
[  105.707461]  print_usage_bug+0x336/0x34c
[  105.711744]  mark_lock+0x7c9/0x980
[  105.715500]  ? print_shortest_lock_dependencies+0x2e0/0x2e0
[  105.721424]  ? check_usage_forwards+0x230/0x230
[  105.726315]  __lock_acquire+0x923/0x26f0
[  105.730597]  ? debug_show_all_locks+0x240/0x240
[  105.735478]  ? mark_lock+0x493/0x980
[  105.739412]  ? check_chain_key+0x140/0x1f0
[  105.743861]  ? __lock_acquire+0x836/0x26f0
[  105.748323]  ? lock_acquire+0x12e/0x290
[  105.752516]  lock_acquire+0x12e/0x290
[  105.756539]  ? est_fetch_counters+0x3c/0xa0
[  105.761084]  _raw_spin_lock+0x2c/0x40
[  105.765099]  ? est_fetch_counters+0x3c/0xa0
[  105.769633]  est_fetch_counters+0x3c/0xa0
[  105.773995]  est_timer+0x87/0x390
[  105.777670]  ? est_fetch_counters+0xa0/0xa0
[  105.782210]  ? lock_acquire+0x12e/0x290
[  105.786410]  call_timer_fn+0x161/0x550
[  105.790512]  ? est_fetch_counters+0xa0/0xa0
[  105.795055]  ? del_timer_sync+0xd0/0xd0
[  105.799249]  ? __lock_is_held+0x93/0x110
[  105.803531]  ? mark_held_locks+0x20/0xe0
[  105.807813]  ? _raw_spin_unlock_irq+0x29/0x40
[  105.812525]  ? est_fetch_counters+0xa0/0xa0
[  105.817069]  ? est_fetch_counters+0xa0/0xa0
[  105.821610]  run_timer_softirq+0x3c4/0x9f0
[  105.826064]  ? lock_acquire+0x12e/0x290
[  105.830257]  ? __bpf_trace_timer_class+0x10/0x10
[  105.835237]  ? __lock_is_held+0x25/0x110
[  105.839517]  __do_softirq+0x11d/0x7bf
[  105.843542]  irq_exit+0x140/0x190
[  105.847208]  smp_apic_timer_interrupt+0xac/0x3b0
[  105.852182]  apic_timer_interrupt+0xf/0x20
[  105.856628]  </IRQ>
[  105.859081] RIP: 0010:cpuidle_enter_state+0xd8/0x4d0
[  105.864395] Code: 46 ff 48 89 44 24 08 0f 1f 44 00 00 31 ff e8 cf ec 46 ff 80 7c 24 07 00 0f 85 1d 02 00 00 e8 9f 90 4b ff fb 66 0f 1f 44 00 00 <4c> 8b 6c 24 08 4d 29 fd 0f 80 36 03 00 00 4c 89 e8 48 ba cf f7 53
[  105.884288] RSP: 0018:ffff8803ad94fd20 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
[  105.892494] RAX: 0000000000000000 RBX: ffffe8fb300829c0 RCX: ffffffffb41e19e1
[  105.899988] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8803ad9358ac
[  105.907503] RBP: ffffffffb6636300 R08: 0000000000000004 R09: 0000000000000000
[  105.914997] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000004
[  105.922487] R13: ffffffffb6636140 R14: ffffffffb66362d8 R15: 000000188d36091b
[  105.929988]  ? trace_hardirqs_on_caller+0x141/0x2d0
[  105.935232]  do_idle+0x28e/0x320
[  105.938817]  ? arch_cpu_idle_exit+0x40/0x40
[  105.943361]  ? mark_lock+0x8c1/0x980
[  105.947295]  ? _raw_spin_unlock_irqrestore+0x32/0x60
[  105.952619]  cpu_startup_entry+0xc2/0xd0
[  105.956900]  ? cpu_in_idle+0x20/0x20
[  105.960830]  ? _raw_spin_unlock_irqrestore+0x32/0x60
[  105.966146]  ? trace_hardirqs_on_caller+0x141/0x2d0
[  105.971391]  start_secondary+0x2b5/0x360
[  105.975669]  ? set_cpu_sibling_map+0x1330/0x1330
[  105.980654]  secondary_startup_64+0xa5/0xb0

Taking tcf_lock in sample action with bh disabled causes lockdep to issue a
warning regarding possible irq lock inversion dependency between tcf_lock,
and psample_groups_lock that is taken when holding tcf_lock in sample init:

[  162.108959]  Possible interrupt unsafe locking scenario:

[  162.116386]        CPU0                    CPU1
[  162.121277]        ----                    ----
[  162.126162]   lock(psample_groups_lock);
[  162.130447]                                local_irq_disable();
[  162.136772]                                lock(&(&p->tcfa_lock)->rlock);
[  162.143957]                                lock(psample_groups_lock);
[  162.150813]   <Interrupt>
[  162.153808]     lock(&(&p->tcfa_lock)->rlock);
[  162.158608]
                *** DEADLOCK ***

In order to prevent potential lock inversion dependency between tcf_lock
and psample_groups_lock, extract call to psample_group_get() from tcf_lock
protected section in sample action init function.

Fixes: 4e232818bd32 ("net: sched: act_mirred: remove dependency on rtnl lock")
Fixes: 764e9a24480f ("net: sched: act_vlan: remove dependency on rtnl lock")
Fixes: 729e01260989 ("net: sched: act_tunnel_key: remove dependency on rtnl lock")
Fixes: d77284956656 ("net: sched: act_sample: remove dependency on rtnl lock")
Fixes: e8917f437006 ("net: sched: act_gact: remove dependency on rtnl lock")
Fixes: b6a2b971c0b0 ("net: sched: act_csum: remove dependency on rtnl lock")
Fixes: 2142236b4584 ("net: sched: act_bpf: remove dependency on rtnl lock")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull first set of KVM updates from Paolo Bonzini:
"PPC:
   - minor code cleanups

  x86:
   - PCID emulation and CR3 caching for shadow page tables
   - nested VMX live migration
   - nested VMCS shadowing
   - optimized IPI hypercall
   - some optimizations

  ARM will come next week"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (85 commits)
  kvm: x86: Set highest physical address bits in non-present/reserved SPTEs
  KVM/x86: Use CC_SET()/CC_OUT in arch/x86/kvm/vmx.c
  KVM: X86: Implement PV IPIs in linux guest
  KVM: X86: Add kvm hypervisor init time platform setup callback
  KVM: X86: Implement "send IPI" hypercall
  KVM/x86: Move X86_CR4_OSXSAVE check into kvm_valid_sregs()
  KVM: x86: Skip pae_root shadow allocation if tdp enabled
  KVM/MMU: Combine flushing remote tlb in mmu_set_spte()
  KVM: vmx: skip VMWRITE of HOST_{FS,GS}_BASE when possible
  KVM: vmx: skip VMWRITE of HOST_{FS,GS}_SEL when possible
  KVM: vmx: always initialize HOST_{FS,GS}_BASE to zero during setup
  KVM: vmx: move struct host_state usage to struct loaded_vmcs
  KVM: vmx: compute need to reload FS/GS/LDT on demand
  KVM: nVMX: remove a misleading comment regarding vmcs02 fields
  KVM: vmx: rename __vmx_load_host_state() and vmx_save_host_state()
  KVM: vmx: add dedicated utility to access guest's kernel_gs_base
  KVM: vmx: track host_state.loaded using a loaded_vmcs pointer
  KVM: vmx: refactor segmentation code in vmx_save_host_state()
  kvm: nVMX: Fix fault priority for VMX operations
  kvm: nVMX: Fix fault vector for VMX operation at CPL > 0
  ...

Merge tag 'riscv-for-linus-4.19-mw0' of git://git./linux/kernel/git/palmer/riscv-linux

Pull RISC-V updates from Palmer Dabbelt:
"This contains some major improvements to the RISC-V port, including
  the necessary interrupt controller and timer support to actually make
  it to userspace. Support for three devices has been added:

   - the ISA-mandated timers on RISC-V systems.

   - the ISA-mandated first-level interrupt controller on RISC-V
     systems, which is handled as part of our core arch code because
     it's very small and tightly tied to the ISA.

   - SiFive's platform-level interrupt controller, which talks to the
     actual devices.

  In addition to these new devices, there are a handful of cleanups all
  over the RISC-V tree:

   - build fixes for various configurations:
      * A fix to the vDSO build's makefile so it respects CFLAGS.
      * The addition of __lshrti3, a libgcc derived function necessary
        for some 32-bit configurations.
      * !SMP && PERF_EVENTS

   - Cleanups to the arch code to remove the remnants of old versions of
     the drivers that were just properly submitted.
      * Some dead code from the timer driver, most of which wasn't ever
        even compiled.
      * Cleanups of some interrupt #defines, which are now local to the
        interrupt handling code.

   - Fixes to ptrace(), which while not being sufficient to fully make
     GDB work are at least sufficient to get simple GDB tasks to work.

   - Early printk support via RISC-V's architecturally mandated SBI
     console device.

   - A fix to our early debug trap handler to ensure it's always
     aligned.

  These patches have all been through a fairly extensive review process,
  but as this enables a whole pile of functionality (ie, userspace) I'm
  confident we'll need to submit a few more patches. The only concrete
  issues I know about are the sys_riscv_flush_icache patches, but as I
  managed to screw those up on Friday I figured it'd be best to let them
  bake another week.

  This tag boots a Fedora root filesystem on QEMU's master branch for
  me, and before this morning's rebase (from 4.18-rc8 to 4.18) it booted
  on the HiFive Unleashed.

  Thanks to Christoph Hellwig and the other guys at WD for getting the
  new drivers in shape!"

* tag 'riscv-for-linus-4.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  dt-bindings: interrupt-controller: SiFive Plaform Level Interrupt Controller
  dt-bindings: interrupt-controller: RISC-V local interrupt controller
  RISC-V: Fix !CONFIG_SMP compilation error
  irqchip: add a SiFive PLIC driver
  RISC-V: Add the directive for alignment of stvec's value
  clocksource: new RISC-V SBI timer driver
  RISC-V: implement low-level interrupt handling
  RISC-V: add a definition for the SIE SEIE bit
  RISC-V: remove INTERRUPT_CAUSE_* defines from asm/irq.h
  RISC-V: simplify software interrupt / IPI code
  RISC-V: remove timer leftovers
  RISC-V: Add early printk support via the SBI console
  RISC-V: Don't increment sepc after breakpoint.
  RISC-V: implement __lshrti3.
  RISC-V: Use KBUILD_CFLAGS instead of KCFLAGS when building the vDSO

Merge tag 'char-misc-4.19-rc1' of git://git./linux/kernel/git/gregkh/char-misc

Pull UIO fix from Greg KH:
"Here is a single UIO fix that I forgot to send before 4.18-final came
  out. It reverts a UIO patch that went in the 4.18 development window
  that was causing problems.

  This patch has been in linux-next for a while with no problems, I just
  forgot to send it earlier, or as part of the larger char/misc patch
  series from yesterday, my fault"

* tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  Revert "uio: use request_threaded_irq instead"

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

- a new driver for Rohm BU21029 touch controller

- new bitmap APIs: bitmap_alloc, bitmap_zalloc and bitmap_free

- updates to Atmel, eeti. pxrc and iforce drivers

- assorted driver cleanups and fixes.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits)
  MAINTAINERS: Add PhoenixRC Flight Controller Adapter
  Input: do not use WARN() in input_alloc_absinfo()
  Input: mark expected switch fall-throughs
  Input: raydium_i2c_ts - use true and false for boolean values
  Input: evdev - switch to bitmap API
  Input: gpio-keys - switch to bitmap_zalloc()
  Input: elan_i2c_smbus - cast sizeof to int for comparison
  bitmap: Add bitmap_alloc(), bitmap_zalloc() and bitmap_free()
  md: Avoid namespace collision with bitmap API
  dm: Avoid namespace collision with bitmap API
  Input: pm8941-pwrkey - add resin entry
  Input: pm8941-pwrkey - abstract register offsets and event code
  Input: iforce - reorganize joystick configuration lists
  Input: atmel_mxt_ts - move completion to after config crc is updated
  Input: atmel_mxt_ts - don't report zero pressure from T9
  Input: atmel_mxt_ts - zero terminate config firmware file
  Input: atmel_mxt_ts - refactor config update code to add context struct
  Input: atmel_mxt_ts - config CRC may start at T71
  Input: atmel_mxt_ts - remove unnecessary debug on ENOMEM
  Input: atmel_mxt_ts - remove duplicate setup of ABS_MT_PRESSURE
  ...

Merge tag 'hwlock-v4.19' of git://github.com/andersson/remoteproc

Pull hwspinlock updates from Bjorn Andersson:
"This introduces devres helpers and an API to request a lock by name,
  then migrates the sprd SPI driver to use these"

* tag 'hwlock-v4.19' of git://github.com/andersson/remoteproc:
  hwspinlock: Fix incorrect return pointers
  spi: sprd: Change to use devm_hwspin_lock_request_specific()
  spi: sprd: Replace of_hwspin_lock_get_id() with of_hwspin_lock_get_id_byname()
  hwspinlock: Fix one comment mistake
  hwspinlock: Remove redundant config
  hwspinlock: Add devm_xxx() APIs to register/unregister one hwlock controller
  hwspinlock: Add devm_xxx() APIs to request/free hwlock
  hwspinlock: Add one new API to support getting a specific hwlock by the name

Merge tag 'rpmsg-v4.19' of git://github.com/andersson/remoteproc

Pull rpmsg updates from Bjorn Andersson:
"This fixes a few compile and kerneldoc warnings, allows rpmsg devices
  to handle power domains, allow for labeling GLINK edges and supports
  compat for rpmsg_char"

* tag 'rpmsg-v4.19' of git://github.com/andersson/remoteproc:
  rpmsg: Add compat ioctl for rpmsg char driver
  rpmsg: glink: Store edge name for glink device
  dt-bindings: soc: qcom: Add label for GLINK bindings
  rpmsg: core: add support to power domains for devices
  rpmsg: smd: fix kerneldoc warnings
  rpmsg: glink: Fix various kerneldoc warnings.
  rpmsg: glink: correctly annotate intent members
  rpmsg: smd: Add missing include of sizes.h

Merge tag 'rproc-v4.19' of git://github.com/andersson/remoteproc

Pull remoteproc updates from Bjorn Andersson:
"This adds support for pre-start and post-shutdown hooks for remoteproc
  subdevices, refactors the Qualcomm Hexagon support to allow reuse
  between several drivers, makes authentication in the MDT file loader
  optional, migrates a few format strings to use %pK and migrates the
  Davinci driver to use the reset framework"

* tag 'rproc-v4.19' of git://github.com/andersson/remoteproc:
  remoteproc/davinci: use the reset framework
  remoteproc/davinci: Mark error recovery as disabled
  remoteproc: st_slim: replace "%p" with "%pK"
  remoteproc: replace "%p" with "%pK"
  remoteproc: qcom: fix Q6V5_WCSS dependencies
  remoteproc: Reset table_ptr in rproc_start() failure paths
  remoteproc: qcom: q6v5-pil: fix modem hang on SDM845 after axis2 clk unvote
  remoteproc: qcom q6v5: fix modular build
  remoteproc: Introduce prepare and unprepare for subdevices
  remoteproc: rename subdev probe and remove functions
  remoteproc: Make client initialize ops in rproc_subdev
  remoteproc: Make start and stop in subdev optional
  remoteproc: Rename subdev functions to start/stop
  remoteproc: qcom: Introduce Hexagon V5 based WCSS driver
  remoteproc: qcom: q6v5-pil: Use common q6v5 helpers
  remoteproc: qcom: adsp: Use common q6v5 helpers
  remoteproc: q6v5: Extract common resource handling
  remoteproc: qcom: mdt_loader: Make the firmware authentication optional

Merge tag 'linux-watchdog-4.19-rc1' of git://linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:

- add MEN 16z069 IP-Core driver

- renesas-wdt: add support for the R8A77990 wdt

- stm32_iwdg: Add stm32mp1 support and pclk feature

- sp805_wdt, orion_wdt, sprd_wdt: several improvements

- imx2_wdt, stmp3xxx: switch to SPDX identifier

* tag 'linux-watchdog-4.19-rc1' of git://www.linux-watchdog.org/linux-watchdog:
  watchdog: fix dependencies of menz69_wdt.o
  watchdog: sp805: Add clock-frequency property
  watchdog: add driver for the MEN 16z069 IP-Core
  watchdog: sprd_wdt: Remove redundant dev_err call in sprd_wdt_probe()
  watchdog: stmp3xxx: Switch to SPDX identifier
  watchdog: imx2_wdt: Switch to SPDX identifier
  watchdog: sp805: set WDOG_HW_RUNNING when appropriate
  watchdog: sp805: add 'timeout-sec' DT property support
  dt-bindings: watchdog: Add optional 'timeout-sec' property for sp805
  dt-bindings: watchdog: Consolidate SP805 binding docs
  watchdog: orion_wdt: Mark watchdog as active when running at probe
  watchdog: stm32: add pclk feature for stm32mp1
  dt-bindings: watchdog: add stm32mp1 support
  dt-bindings: watchdog: renesas-wdt: Add support for the R8A77990 wdt

Merge tag 'dmaengine-4.19-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull DMAengine updates from Vinod Koul:
"This round brings couple of framework changes, a new driver and usual
  driver updates:

   - new managed helper for dmaengine framework registration

   - split dmaengine pause capability to pause and resume and allow
     drivers to report that individually

   - update dma_request_chan_by_mask() to handle deferred probing

   - move imx-sdma to use virt-dma

   - new driver for Actions Semi Owl family S900 controller

   - minor updates to intel, renesas, mv_xor, pl330 etc"

* tag 'dmaengine-4.19-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (46 commits)
  dmaengine: Add Actions Semi Owl family S900 DMA driver
  dt-bindings: dmaengine: Add binding for Actions Semi Owl SoCs
  dmaengine: sh: rcar-dmac: Should not stop the DMAC by rcar_dmac_sync_tcr()
  dmaengine: mic_x100_dma: use the new helper to simplify the code
  dmaengine: add a new helper dmaenginem_async_device_register
  dmaengine: imx-sdma: add memcpy interface
  dmaengine: imx-sdma: add SDMA_BD_MAX_CNT to replace '0xffff'
  dmaengine: dma_request_chan_by_mask() to handle deferred probing
  dmaengine: pl330: fix irq race with terminate_all
  dmaengine: Revert "dmaengine: mv_xor_v2: enable COMPILE_TEST"
  dmaengine: mv_xor_v2: use {lower,upper}_32_bits to configure HW descriptor address
  dmaengine: mv_xor_v2: enable COMPILE_TEST
  dmaengine: mv_xor_v2: move unmap to before callback
  dmaengine: mv_xor_v2: convert callback to helper function
  dmaengine: mv_xor_v2: kill the tasklets upon exit
  dmaengine: mv_xor_v2: explicitly freeup irq
  dmaengine: sh: rcar-dmac: Add dma_pause operation
  dmaengine: sh: rcar-dmac: add a new function to clear CHCR.DE with barrier
  dmaengine: idma64: Support dmaengine_terminate_sync()
  dmaengine: hsu: Support dmaengine_terminate_sync()
  ...

Merge tag 'mmc-v4.19' of git://git./linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
"Updates for MMC for v4.19.

  MMC core:
   - Add some fine-grained hooks to further support HS400 tuning
   - Improve error path for bus width setting for HS400es
   - Use a common method when checking R1 status

  MMC host:
   - renesas_sdhi: Add r8a77990 support
   - renesas_sdhi: Add eMMC HS400 mode support
   - tmio/renesas_sdhi: Improve tuning/clock management
   - tmio: Add eMMC HS400 mode support
   - sunxi: Add support for 3.3V eMMC DDR mode
   - mmci: Initial support to manage variant specific callbacks
   - sdhci: Don't try 3.3V I/O voltage if not supported
   - sdhci-pci-dwc-mshc: Add driver to support Synopsys dwc mshc SDHCI PCI
   - sdhci-of-dwcmshc: Add driver to support Synopsys DWC MSHC SDHCI
   - sdhci-msm: Add support for new version sdcc V5
   - sdhci-pci-o2micro: Add support for O2 eMMC HS200 mode
   - sdhci-pci-o2micro: Add support for O2 hardware tuning
   - sdhci-pci-o2micro: Add MSI interrupt support for O2 SD host
   - sdhci-pci: Add support for Intel ICP
   - sdhci-tegra: Prevent ACMD23 and HS200 mode on Tegra 3
   - sdhci-tegra: Fix eMMC DDR52 mode
   - sdhci-tegra: Improve clock management
   - dw_mmc-rockchip: Document compatible string for px30
   - sdhci-esdhc-imx: Add support for 3.3V eMMC DDR mode
   - sdhci-of-esdhc: Set proper DMA mask for ls104x chips
   - sdhci-of-esdhc: Improve clock management
   - sdhci-of-arasan: Add a quirk to manage unstable clocks
   - dw_mmc-exynos: Address potential external abort during system resume
   - pxamci: Add support for common MMC DT bindings
   - pxamci: Several cleanups and improvements
   - pxamci: Merge immutable branch for pxa to switch to DMA slave maps"

* tag 'mmc-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (56 commits)
  mmc: core: improve reasonableness of bus width setting for HS400es
  mmc: tmio: remove unneeded variable in tmio_mmc_start_command()
  mmc: renesas_sdhi: Fix sampling clock position selecting
  mmc: tmio: Fix tuning flow
  mmc: sunxi: remove output of virtual base address
  dt-bindings: mmc: rockchip-dw-mshc: add description for px30
  mmc: renesas_sdhi: Add r8a77990 support
  mmc: sunxi: allow 3.3V DDR when DDR is available
  mmc: mmci: Add and implement a ->dma_setup() callback for qcom dml
  mmc: mmci: Initial support to manage variant specific callbacks
  mmc: tegra: Force correct divider calculation on DDR50/52
  mmc: sdhci: Add MSI interrupt support for O2 SD host
  mmc: sdhci: Add support for O2 hardware tuning
  mmc: sdhci: Export sdhci tuning function symbol
  mmc: sdhci: Change O2 Host HS200 mode clock frequency to 200MHz
  mmc: sdhci: Add support for O2 eMMC HS200 mode
  mmc: tegra: Add and use tegra_sdhci_get_max_clock()
  mmc: sdhci-esdhc-imx: fix indent
  mmc: sdhci-esdhc-imx: disable clocks before changing frequency
  mmc: tegra: prevent ACMD23 on Tegra 3
  ...

ip6_vti: simplify stats handling in vti6_xmit

Same as ip_vti, use iptunnel_xmit_stats to updates stats in tunnel xmit
code path.

Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

pcmcia: remove long deprecated pcmcia_request_exclusive_irq() function

This function was created as a deprecated fallback case back in 2010 by
commit eb14120f743d ("pcmcia: re-work pcmcia_request_irq()") for legacy
cases.

Actual in-kernel users haven't been around for a long while. The last
in-kernel user was apparently removed four years ago by commit
5f5316fcd08e ("am2150: Update nmclan_cs.c to use update PCMCIA API").

Just remove it entirely.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

deprecate the '__deprecated' attribute warnings entirely and for good

We haven't had lots of deprecation warnings lately, but the rdma use of
it made them flare up again.

They are not useful.  They annoy everybody, and nobody ever does
anything about them, because it's always "somebody elses problem".  And
when people start thinking that warnings are normal, they stop looking
at them, and the real warnings that mean something go unnoticed.

If you want to get rid of a function, just get rid of it.  Convert every
user to the new world order.

And if you can't do that, then don't annoy everybody else with your
marking that says "I couldn't be bothered to fix this, so I'll just spam
everybody elses build logs with warnings about my laziness".

Make a kernelnewbies wiki page about things that could be cleaned up,
write a blog post about it, or talk to people on the mailing lists.  But
don't add warnings to the kernel build about cleanup that you think
should happen but you aren't doing yourself.

Don't.  Just don't.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'driver-core-4.19-rc1' of git://git./linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
"Here are all of the driver core and related patches for 4.19-rc1.

  Nothing huge here, just a number of small cleanups and the ability to
  now stop the deferred probing after init happens.

  All of these have been in linux-next for a while with only a merge
  issue reported"

* tag 'driver-core-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (21 commits)
  base: core: Remove WARN_ON from link dependencies check
  drivers/base: stop new probing during shutdown
  drivers: core: Remove glue dirs from sysfs earlier
  driver core: remove unnecessary function extern declare
  sysfs.h: fix non-kernel-doc comment
  PM / Domains: Stop deferring probe at the end of initcall
  iommu: Remove IOMMU_OF_DECLARE
  iommu: Stop deferring probe at end of initcalls
  pinctrl: Support stopping deferred probe after initcalls
  dt-bindings: pinctrl: add a 'pinctrl-use-default' property
  driver core: allow stopping deferred probe after init
  driver core: add a debugfs entry to show deferred devices
  sysfs: Fix internal_create_group() for named group updates
  base: fix order of OF initialization
  linux/device.h: fix kernel-doc notation warning
  Documentation: update firmware loader fallback reference
  kobject: Replace strncpy with memcpy
  drivers: base: cacheinfo: use OF property_read_u32 instead of get_property,read_number
  kernfs: Replace strncpy with memcpy
  device: Add #define dev_fmt similar to #define pr_fmt
  ...

Merge tag 'char-misc-4.19-rc1' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
"Here is the bit set of char/misc drivers for 4.19-rc1

  There is a lot here, much more than normal, seems like everyone is
  writing new driver subsystems these days... Anyway, major things here
  are:

   - new FSI driver subsystem, yet-another-powerpc low-level hardware
     bus

   - gnss, finally an in-kernel GPS subsystem to try to tame all of the
     crazy out-of-tree drivers that have been floating around for years,
     combined with some really hacky userspace implementations. This is
     only for GNSS receivers, but you have to start somewhere, and this
     is great to see.

  Other than that, there are new slimbus drivers, new coresight drivers,
  new fpga drivers, and loads of DT bindings for all of these and
  existing drivers.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
  android: binder: Rate-limit debug and userspace triggered err msgs
  fsi: sbefifo: Bump max command length
  fsi: scom: Fix NULL dereference
  misc: mic: SCIF Fix scif_get_new_port() error handling
  misc: cxl: changed asterisk position
  genwqe: card_base: Use true and false for boolean values
  misc: eeprom: assignment outside the if statement
  uio: potential double frees if __uio_register_device() fails
  eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency
  misc: ti-st: Fix memory leak in the error path of probe()
  android: binder: Show extra_buffers_size in trace
  firmware: vpd: Fix section enabled flag on vpd_section_destroy
  platform: goldfish: Retire pdev_bus
  goldfish: Use dedicated macros instead of manual bit shifting
  goldfish: Add missing includes to goldfish.h
  mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux
  dt-bindings: mux: add adi,adgs1408
  Drivers: hv: vmbus: Cleanup synic memory free path
  Drivers: hv: vmbus: Remove use of slow_virt_to_phys()
  Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind()
  ...

Merge tag 'staging-4.19-rc1' of git://git./linux/kernel/git/gregkh/staging

Pull staging and IIO updates from Greg KH:
"Here are the big staging/iio patches for 4.19-rc1.

  Lots of churn here, with tons of cleanups happening in staging
  drivers, a removal of an old crypto driver that no one was using
  (skein), and the addition of some new IIO drivers. Also added was a
  "gasket" driver from Google that needs loads of work and the erofs
  filesystem.

  Even with adding all of the new drivers and a new filesystem, we are
  only adding about 1000 lines overall to the kernel linecount, which
  shows just how much cleanup happened, and how big the unused crypto
  driver was.

  All of these have been in the linux-next tree for a while now with no
  reported issues"

* tag 'staging-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (903 commits)
  staging:rtl8192u: Remove unused macro definitions - Style
  staging:rtl8192u: Add spaces around '+' operator - Style
  staging:rtl8192u: Remove stale comment - Style
  staging: rtl8188eu: remove unused mp_custom_oid.h
  staging: fbtft: Add spaces around / - Style
  staging: fbtft: Erases some repetitive usage of function name - Style
  staging: fbtft: Adjust some empty-line problems - Style
  staging: fbtft: Removes one nesting level to help readability - Style
  staging: fbtft: Changes gamma table to define.
  staging: fbtft: A bit more information on dev_err.
  staging: fbtft: Fixes some alignment issues - Style
  staging: fbtft: Puts macro arguments in parenthesis to avoid precedence issues - Style
  staging: rtl8188eu: remove unused array dB_Invert_Table
  staging: rtl8188eu: remove whitespace, add missing blank line
  staging: rtl8188eu: use is_multicast_ether_addr in rtw_sta_mgt.c
  staging: rtl8188eu: remove whitespace - style
  staging: rtl8188eu: cleanup block comment - style
  staging: rtl8188eu: use is_multicast_ether_addr in rtl8188eu_xmit.c
  staging: rtl8188eu: use is_multicast_ether_addr in recv_linux.c
  staging: rtlwifi: refactor rtl_get_tcb_desc
  ...

Merge tag 'tty-4.19-rc1' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial driver updates from Greg KH:
"Here is the big tty and serial driver pull request for 4.19-rc1.

  It's not all that big, just a number of small serial driver updates
  and fixes, along with some better vt handling for unicode characters
  for those using braille terminals.

  All of these patches have been in linux-next for a long time with no
  reported issues"

* tag 'tty-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (73 commits)
  tty: serial: 8250: Revert NXP SC16C2552 workaround
  serial: 8250_exar: Read INT0 from slave device, too
  tty: rocket: Fix possible buffer overwrite on register_PCI
  serial: 8250_dw: Add ACPI support for uart on Broadcom SoC
  serial: 8250_dw: always set baud rate in dw8250_set_termios
  dt-bindings: serial: Add binding for uartlite
  tty: serial: uartlite: Add support for suspend and resume
  tty: serial: uartlite: Add clock adaptation
  tty: serial: uartlite: Add structure for private data
  serial: sh-sci: Improve support for separate TEI and DRI interrupts
  serial: sh-sci: Remove SCIx_RZ_SCIFA_REGTYPE
  serial: sh-sci: Allow for compressed SCIF address
  serial: sh-sci: Improve interrupts description
  serial: 8250: Use cached port name directly in messages
  serial: 8250_exar: Drop unused variable in pci_xr17v35x_setup()
  vt: drop unused struct vt_struct
  vt: avoid a VLA in the unicode screen scroll function
  vt: add /dev/vcsu* to devices.txt
  vt: coherence validation code for the unicode screen buffer
  vt: selection: take screen contents from uniscr if available
  ...

Merge tag 'usb-4.19-rc1' of git://git./linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
"Here is the big USB and phy driver patch set for 4.19-rc1.

  Nothing huge but there was a lot of work that happened this
  development cycle:

   - lots of type-c work, with drivers graduating out of staging, and
     displayport support being added.

   - new PHY drivers

   - the normal collection of gadget driver updates and fixes

   - code churn to work on the urb handling path, using irqsave()
     everywhere in anticipation of making this codepath a lot simpler in
     the future.

   - usbserial driver fixes and reworks

   - other misc changes

  All of these have been in linux-next with no reported issues for a
  while"

* tag 'usb-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (159 commits)
  USB: serial: pl2303: add a new device id for ATEN
  usb: renesas_usbhs: Kconfig: convert to SPDX identifiers
  usb: dwc3: gadget: Check MaxPacketSize from descriptor
  usb: dwc2: Turn on uframe_sched on "stm32f4x9_fsotg" platforms
  usb: dwc2: Turn on uframe_sched on "amlogic" platforms
  usb: dwc2: Turn on uframe_sched on "his" platforms
  usb: dwc2: Turn on uframe_sched on "bcm" platforms
  usb: dwc2: gadget: ISOC's starting flow improvement
  usb: dwc2: Make dwc2_readl/writel functions endianness-agnostic.
  usb: dwc3: core: Enable AutoRetry feature in the controller
  usb: dwc3: Set default mode for dwc_usb31
  usb: gadget: udc: renesas_usb3: Add register of usb role switch
  usb: dwc2: replace ioread32/iowrite32_rep with dwc2_readl/writel_rep
  usb: dwc2: Modify dwc2_readl/writel functions prototype
  usb: dwc3: pci: Intel Merrifield can be host
  usb: dwc3: pci: Supply device properties via driver data
  arm64: dts: dwc3: description of incr burst type
  usb: dwc3: Enable undefined length INCR burst type
  usb: dwc3: add global soc bus configuration reg0
  usb: dwc3: Describe 'wakeup_work' field of struct dwc3_pci
  ...

Merge git://git./pub/scm/linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2018-08-18

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix a BPF selftest failure in test_cgroup_storage due to rlimit
   restrictions, from Yonghong.

2) Fix a suspicious RCU rcu_dereference_check() warning triggered
   from removing a device's XDP memory allocator by using the correct
   rhashtable lookup function, from Tariq.

3) A batch of BPF sockmap and ULP fixes mainly fixing leaks and races
   as well as enforcing module aliases for ULPs. Another fix for BPF
   map redirect to make them work again with tail calls, from Daniel.

4) Fix XDP BPF samples to unload their programs upon SIGTERM, from Jesper.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./pub/scm/linux/kernel/git/pablo/nf

Pablo Neira Ayuso says:

====================
Netfilter/IPVS fixes for net

The following patchset contains Netfilter/IPVS fixes for your net tree:

1) Infinite loop in IPVS when net namespace is released, from
   Tan Hu.

2) Do not show negative timeouts in ip_vs_conn by using the new
   jiffies_delta_to_msecs(), patches from Matteo Croce.

3) Set F_IFACE flag for linklocal addresses in ip6t_rpfilter,
   from Florian Westphal.

4) Fix overflow in set size allocation, from Taehee Yoo.

5) Use netlink_dump_start() from ctnetlink to fix memleak from
   the error path, again from Florian.

6) Register nfnetlink_subsys in last place, otherwise netns
   init path may lose race and see net->nft uninitialized data.
   This also reverts previous attempt to fix this by increase
   netns refcount, patches from Florian.

7) Remove conntrack entries on layer 4 protocol tracker module
   removal, from Florian.

8) Use GFP_KERNEL_ACCOUNT for xtables blob allocation, from
   Michal Hocko.

9) Get tproxy documentation in sync with existing codebase,
   from Mate Eckl.

10) Honor preset layer 3 protocol via ctx->family in the new nft_ct
    timeout infrastructure, from Harsha Sharma.

11) Let uapi nfnetlink_osf.h compile standalone with no errors,
    from Dmitry V. Levin.

12) Missing braces compilation warning in nft_tproxy, patch from
    Mate Eclk.

13) Disregard bogus check to bail out on non-anonymous sets from
    the dynamic set update extension.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag '9p-for-4.19-2' of git://github.com/martinetd/linux

Pull 9p updates from Dominique Martinet:
"This contains mostly fixes (6 to be backported to stable) and a few
  changes, here is the breakdown:

   - rework how fids are attributed by replacing some custom tracking in
     a list by an idr

   - for packet-based transports (virtio/rdma) validate that the packet
     length matches what the header says

   - a few race condition fixes found by syzkaller

   - missing argument check when NULL device is passed in sys_mount

   - a few virtio fixes

   - some spelling and style fixes"

* tag '9p-for-4.19-2' of git://github.com/martinetd/linux: (21 commits)
  net/9p/trans_virtio.c: add null terminal for mount tag
  9p/virtio: fix off-by-one error in sg list bounds check
  9p: fix whitespace issues
  9p: fix multiple NULL-pointer-dereferences
  fs/9p/xattr.c: catch the error of p9_client_clunk when setting xattr failed
  9p: validate PDU length
  net/9p/trans_fd.c: fix race by holding the lock
  net/9p/trans_fd.c: fix race-condition by flushing workqueue before the kfree()
  net/9p/virtio: Fix hard lockup in req_done
  net/9p/trans_virtio.c: fix some spell mistakes in comments
  9p/net: Fix zero-copy path in the 9p virtio transport
  9p: Embed wait_queue_head into p9_req_t
  9p: Replace the fidlist with an IDR
  9p: Change p9_fid_create calling convention
  9p: Fix comment on smp_wmb
  net/9p/client.c: version pointer uninitialized
  fs/9p/v9fs.c: fix spelling mistake "Uknown" -> "Unknown"
  net/9p: fix error path of p9_virtio_probe
  9p/net/protocol.c: return -ENOMEM when kmalloc() failed
  net/9p/client.c: add missing '\n' at the end of p9_debug()
  ...

Merge branch 'akpm' (patches from Andrew)

Merge updates from Andrew Morton:

- a few misc things

- a few Y2038 fixes

- ntfs fixes

- arch/sh tweaks

- ocfs2 updates

- most of MM

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (111 commits)
  mm/hmm.c: remove unused variables align_start and align_end
  fs/userfaultfd.c: remove redundant pointer uwq
  mm, vmacache: hash addresses based on pmd
  mm/list_lru: introduce list_lru_shrink_walk_irq()
  mm/list_lru.c: pass struct list_lru_node* as an argument to __list_lru_walk_one()
  mm/list_lru.c: move locking from __list_lru_walk_one() to its caller
  mm/list_lru.c: use list_lru_walk_one() in list_lru_walk_node()
  mm, swap: make CONFIG_THP_SWAP depend on CONFIG_SWAP
  mm/sparse: delete old sparse_init and enable new one
  mm/sparse: add new sparse_init_nid() and sparse_init()
  mm/sparse: move buffer init/fini to the common place
  mm/sparse: use the new sparse buffer functions in non-vmemmap
  mm/sparse: abstract sparse buffer allocations
  mm/hugetlb.c: don't zero 1GiB bootmem pages
  mm, page_alloc: double zone's batchsize
  mm/oom_kill.c: document oom_lock
  mm/hugetlb: remove gigantic page support for HIGHMEM
  mm, oom: remove sleep from under oom_lock
  kernel/dma: remove unsupported gfp_mask parameter from dma_alloc_from_contiguous()
  mm/cma: remove unsupported gfp_mask parameter from cma_alloc()
  ...

mm/hmm.c: remove unused variables align_start and align_end

Variables align_start and align_end are being assigned but are never
used hence they are redundant and can be removed.

Cleans up clang warnings:
warning: variable 'align_start' set but not used [-Wunused-but-set-variable]
warning: variable 'align_size' set but not used [-Wunused-but-set-variable]

Link: http://lkml.kernel.org/r/20180714161124.3923-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>