dt-bindings: usb: dwc2: add power-domains property

A test with the command below gives this error:

arch/arm64/boot/dts/rockchip/px30-evb.dt.yaml: usb@ff300000:
'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'

With the conversion to yaml it also filters things
in a node that are used by other drivers like
'power-domains' for Rockchip px30 usb nodes,
so add them to 'dwc2.yaml'.

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/dwc2.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: gpu: add power-domains #cooling-cells to arm,mali-bifrost.yaml

A test with the command below gives this error:

arch/arm64/boot/dts/rockchip/px30-evb.dt.yaml: gpu@ff400000:
'#cooling-cells', 'power-domains'
do not match any of the regexes: 'pinctrl-[0-9]+'

With the conversion to yaml it also filters things
in a node that are used by other drivers like
'#cooling-cells' and 'power-domains'
for Rockchip px30 gpu nodes,
so add them to 'arm,mali-bifrost.yaml'.

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/gpu/
arm,mali-bifrost.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: sh_eth: Sort compatible string in increasing number of the SoC

Sort the items in the compatible string list in increasing number of SoC.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: at24: add microchip, 24lc[0-9]+ to the compatible pattern

arch/arm/boot/dts/uniphier-ref-daughter.dtsi has

  compatible = "microchip,24lc128", "atmel,24c128";

and 'make ARCH=arm dtbs_check' warns this:

  eeprom@50: compatible: ['microchip,24lc128', 'atmel,24c128'] is not valid under any of the given schemas (Possible causes of the failure)

Microchip 24LC128 is the device used on this board, and I see it in
https://www.microchip.com/wwwproducts/en/24LC128

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: watchdog: Convert i.MX7ULP to json-schema

Convert the i.MX7ULP watchdog binding to DT schema format using json-schema.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: watchdog: Convert i.MX to json-schema

Convert the i.MX watchdog binding to DT schema format using json-schema.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: nvmem: Convert MXS OCOTP to json-schema

Convert the MXS OCOTP binding to DT schema format using json-schema.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: nvmem: Convert i.MX IIM to json-schema

Convert the i.MX IIM binding to DT schema format using json-schema.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: nvmem: Convert i.MX OCOTP to json-schema

Convert the i.MX OCOTP binding to DT schema format using json-schema.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: gpio: Convert i.MX to json-schema

Convert the i.MX GPIO binding to DT schema format using json-schema.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: thermal: Convert i.MX8MM to json-schema

Convert the i.MX8MM thermal binding to DT schema format using json-schema

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: iommu: renesas,ipmmu-vmsa: convert to json-schema

Convert Renesas VMSA-Compatible IOMMU bindings documentation
to json-schema.

Note that original documentation doesn't mention renesas,ipmmu-vmsa
for R-Mobile APE6. But, R-Mobile APE6 is similar to the R-Car
Gen2. So, renesas,ipmmu-r8a73a4 belongs the renesas,ipmmu-vmsa
section.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>

docs: dt: convert writing-bindings.txt to ReST

- Add a SPDX header;
- Adjust document and section titles;
- Mark literal blocks as such;
- Add it to bindings/index.rst.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

docs: dt: convert submitting-patches.txt to ReST format

- Add a SPDX header;
- Adjust document and section titles;
- Mark literal blocks as such;
- Add it to bindings/index.rst.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

docs: dt: convert ABI.txt to ReST format

This file only requires a properly-formatted title to be
recognized as a ReST file.

As there will be more files under bindings/ that will be
included at the documentation body, add a new index.rst
file there.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

docs: dt: convert overlay-notes.txt to ReST format

- Add a SPDX header;
- Adjust document title;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add it to devicetree/index.rst.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

docs: dt: convert of_unittest.txt to ReST

- Add a SPDX header;
- Adjust document and section titles;
- Adjust numerated list markups;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add it to devicetree/index.rst.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

docs: dt: convert dynamic-resolution-notes.txt to ReST

- Add a SPDX header;
- Adjust document title;
- Add it to devicetree/index.rst.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

docs: dt: convert changesets to ReST

- Add a SPDX header;
- Add a document title;
- Some whitespace fixes and new line breaks;
- Add it to devicetree/index.rst.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

docs: dt: usage_model.rst: fix link for DT usage

The devicetree.org doesn't host the Device_Tree_Usage page
anymore. So, fix the link to point to a new address.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

docs: dt: convert usage-model.txt to ReST

- Add a SPDX header;
- Adjust document title;
- Use footnoote markups;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add it to devicetree/index.rst.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>

docs: dt: add an index.rst file for devicetree

There are some device tree documentation under
Documentation/devicetree. Add a top index file for it and
add the already-existing ReST file on it.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

of: Documentation: change overlay example to use current syntax

The overlay implementation details in the compiled (DTB) file are
now properly implemented by the dtc compiler and should no longer
be hard coded in the source file.

Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: arm: Add Calxeda system registers json-schema binding

The Calxeda system registers are a collection of MMIO register
controlling several more general aspects of the SoC.
Beside for some power management tasks this node is also somewhat
abused as the container for the clock nodes.

Add a binding in DT schema format using json-schema.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: ipmi: Convert IPMI-SMIC bindings to json-schema

Convert the generic IPMI controller bindings to DT schema format
using json-schema.

The device_type property is deprecated for most node per the DT spec,
but at least the Linux driver matches on it, so I keep it in.

The Linux driver parses for some additional and optional properties,
but there are no in-tree users. Let's allow extra properties to cover
any other users.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: memory-controllers: Convert Calxeda DDR to json-schema

Convert the Calxeda DDR memory controller binding to DT schema format
using json-schema.
Although this technically covers the whole DRAM controller, the
intention to use it only for error reporting and mapping fault addresses
to DRAM chips.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: arm: Convert Calxeda L2 cache controller to json-schema

Convert the L2-ECC controller binding to DT schema format using
json-schema.
This is indented to be just used for error reporting.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: phy: Convert Calxeda ComboPHY binding to json-schema

Convert the Calxeda ComboPHY binding to DT schema format using
json-schema.
There is no driver in the Linux kernel matching the compatible
string, but the nodes are parsed by the SATA driver, which links to them
using its port-phys property.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: net: Convert Calxeda Ethernet binding to json-schema

Convert the Calxeda XGMAC Ethernet device binding to DT schema format
using json-schema.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: sata: Convert Calxeda SATA controller to json-schema

Convert the Calxeda Highbank SATA controller binding to DT schema format
using json-schema.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: clock: Convert Calxeda clock bindings to json-schema

Convert the Calxeda clock bindings to DT schema format using json-schema.

This just covers the actual PLL and divider clock nodes. In the actual
DTs they are somewhat unconnected (no ranges or bus compatible) children
of the sregs node, but for the actual clock bindings this is not
relevant.

One oddity is that the addresses are relative to the parent node,
without that being pronounced using a ranges property.
But this is too late to fix now.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: Remove cases of 'allOf' containing a '$ref'

json-schema versions draft7 and earlier have a weird behavior in that
any keywords combined with a '$ref' are ignored (silently). The correct
form was to put a '$ref' under an 'allOf'. This behavior is now changed
in the 2019-09 json-schema spec and '$ref' can be mixed with other
keywords. The json-schema library doesn't yet support this, but the
tooling now does a fixup for this and either way works.

This has been a constant source of review comments, so let's change this
treewide so everyone copies the simpler syntax.

Scripted with ruamel.yaml with some manual fixups. Some minor whitespace
changes from the script.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de> # for I2C
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio
Reviewed-by: Stephen Boyd <sboyd@kernel.org> # clock
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: Add a minimum version check for dtschema

The dtschema package must be somewhat up to date as the tools and
meta-schema checks are still evolving. Implement a version check,
so this can be enforced. This will help ensure new schema submissions
get checked against the latest meta-schemas.

Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: serial: Convert 8250 to json-schema

Some fixes were done during the conversion:

Slightly better examples. The original example was for an OMAP serial
port, which is not even described by this binding, but by
omap_serial.txt instead.

Added compatible strings, that were used, byt not documented:
andestech,uart16550, cavium,octeon-3860-uart, fsl,16550-FIFO64,
nvidia,tegra186-uart, nvidia,tegra194-uart, nxp,lpc1850-uart,
opencores,uart16550-rtlsvn105, ralink,mt7620a-uart, ralink,rt3052-uart,
ralink,rt3883-uart and xlnx,xps-uart16550-2.00.b.

Removed "serial" compatible string. It's redundant with the node name
(which, in OFW, serves the same purpose as the compatible string).

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
[robh: allow additional properties. clocks/clock-frequency can be
optional on original 8250 series with standard clocks]
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: serial: Move Marvell compatible string to 8250 binding doc

These ports are compatible with NS8250 and handled by the same driver.
Get rid of the extra document that fails to document the properties that
are actually supported.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Rob Herring <robh@kernel.org>

Merge branch 'dt/linus' into 'dt/next'

of: property: Do not link to disabled devices

When creating a consumer/supplier relationship between two devices,
make sure the supplier node is actually active. Otherwise this will
create a link relationship that will never be fulfilled. This, in the
worst case scenario, will hang the system during boot.

Note that, in practice, the fact that a device-tree represented
consumer/supplier relationship isn't fulfilled will not prevent devices
from successfully probing.

Fixes: a3e1d1a7f5fc ("of: property: Add functional dependency link from DT bindings")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Rob Herring <robh@kernel.org>

of: property: Fix create device links for all child-supplier dependencies

Upon adding a new device from a DT node, we scan its properties and its
children's properties in order to create a consumer/supplier
relationship between the device and the property provider.

That said, it's possible for some of the node's children to be disabled,
which will create links that'll never be fulfilled.

To get around this, use the for_each_available_child_of_node() function
instead of for_each_available_node() when iterating over the node's
children.

Fixes: d4387cd11741 ("of: property: Create device links for all child-supplier depencencies")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Rob Herring <robh@kernel.org>

of: property: Don't retry device_link_add() upon failure

When of_link_to_phandle() was implemented initially, there was no way to
tell if device_link_add() was failing because the supplier device hasn't
been parsed yet, hasn't been added yet, the links were creating a cycle,
etc. Some of these were transient errors that'd go away at a later
point.

However, with the current set of improved checks, if device_link_add()
fails, it'll only be for permanent errors like cycles or out-of-memory
errors.

Also, with the addition of DL_FLAG_SYNC_STATE_ONLY flag [1] to device
links, all the valid dependency cycles due to "proxy" device links
(needed for correctness of sync_state() device callback) will never fail
device_link_add() due to cycles.

So, continuing to retry failing device links (by returning -EAGAIN) is
no longer useful. At worst, it prevents platforms from setting
fw_devlink=on (or better) because it prevents proper boot up. So, let's
not do that anymore.

[1] - https://lore.kernel.org/lkml/20191028220027.251605-1-saravanak@google.com/
Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: iio: adi,ltc2983: Add missing quotes on dependencies

With the bracketed list form, any strings with commas have to be quoted
or they are separated.

Fixes: 3986a14870cb ("dt-bindings: iio: Add ltc2983 documentation")
Cc: "Nuno Sá" <nuno.sa@analog.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: linux-iio@vger.kernel.org
Acked-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: i2c: i2c-stm32f7: add st,stm32mp15-i2c compatible

Add a new stm32mp15 specific compatible to handle FastMode+
registers which are different on the stm32mp15 compared
to the stm32f7 or stm32h7.

Signed-off-by: Alain Volmat <alain.volmat@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: phy: qcom-qusb2: Fix defaults

The defaults listed in the bindings don't match what the code is
actually doing.  Presumably existing users care more about keeping
existing behavior the same, so change the bindings to match the code
in Linux.

The "qcom,preemphasis-level" default has been wrong for quite a long
time (May 2018).  The other two were recently added.

As some evidence that these values are wrong, this is from the Linux
driver:
- qcom,preemphasis-level: sets "PORT_TUNE1", lower 2 bits.  Driver
  programs PORT_TUNE1 to 0x30 by default and (0x30 & 0x3) = 0.
- qcom,bias-ctrl-value: sets "PLL_BIAS_CONTROL_2", lower 6 bits.
  Driver programs PLL_BIAS_CONTROL_2 to 0x20 by default and (0x20 &
  0x3f) = 0x20 = 32.
- qcom,hsdisc-trim-value: sets "PORT_TUNE2", lower 2 bits.  Driver
  programs PORT_TUNE2 to 0x29 by default and (0x29 & 0x3) = 1.

Fixes: 1e6f134eb67a ("dt-bindings: phy: qcom-qusb2: Add support for overriding Phy tuning parameters")
Fixes: a8b70ccf10e3 ("dt-bindings: phy-qcom-usb2: Add support to override tuning values")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: Fix erroneous 'additionalProperties'

There's several cases of json-schema 'additionalProperties' at the wrong
indentation level which has the effect of making them DT properties. This
is harmless, but let's fix them so a meta-schema check for this can be
added.

In all the cases, either the 'additionalProperties' was extra or doesn't
work because there's a $ref to more properties. In the latter case, we
can use 'unevaluatedProperties' instead.

Reported-by: Iskren Chernev <iskren.chernev@gmail.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Saravanan Sekar <sravanhome@gmail.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: Fix command line length limit calling dt-mk-schema

As the number of schemas has increased, we're starting to hit the error
"execvp: /bin/sh: Argument list too long". This is due to passing all the
schema files on the command line to dt-mk-schema. It currently is only
with out of tree builds and is intermittent depending on the file path
lengths.

Commit 2ba06cd8565b ("kbuild: Always validate DT binding examples") made
hitting this proplem more likely since the example validation now always
gets the full list of schemas.

Fix this by passing the schema file list in a pipe and using xargs. We end
up doing the find twice, but the time is insignificant compared to the
dt-mk-schema time.

Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: Re-enable core schemas for dtbs_check

In commit 2ba06cd8565b ("kbuild: Always validate DT binding examples"),
the core schemas (from dtschema repo) were inadvertently disabled for
dtbs_checks. Re-enable them.

Fixes: 2ba06cd8565b ("kbuild: Always validate DT binding examples")
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: Add an entry for Würth Elektronik, we

Add an entry for Würth Elektronik GmbH, we

Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: mailbox: imx-mu: correct example

The example use i.MX8QXP MU, but actually the MU is compatible with
i.MX6SX, so add the compatible.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: MIPS: Require SoC compatible string after board string

All devicetree board files list a compatible string for the SoC after
the compatible string of the board.

Enhance the YAML format so that these SoC compatible strings appear
aside each supported Ingenic board.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: usb: ingenic,musb: Add usb-role-switch property

Add the common usb-role-switch boolean property to the list of the
supported properties.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: dma: Convert jz4740-dma doc to YAML

Convert the textual documentation for the Ingenic SoCs DMA Controller
devicetree binding to YAML.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: mmc: Convert jz4740-mmc doc to YAML

Convert the jz4740-mmc.txt documentation to YAML.

The ingenic,jz4770-mmc compatible string was added in the process, with
a fallback to ingenic,jz4760-mmc.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: timer: Convert ingenic,tcu.txt to YAML

Convert the ingenic,tcu.txt file to YAML.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: nvmem: Convert rockchip-efuse bindings to yaml

Convert the existing rockchip-efuse binding to json-schema. No changes
were done to the binding except for small changes in the documentation
strings.

This deletes the rockchip-efuse.txt binding and replaces it with
rockchip-efuse.yaml.

Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: gpu: mali-utgard: Add the #cooling-cells property

The GPU can be one of the big heat sources on a SoC. Allow the
"#cooling-cells" property to be specified for ARM Mali Utgard GPUs so
the GPU clock speeds (and voltages) can be reduced to prevent a SoC from
overheating.

Reviewed-by: Qiang Yu <yuq825@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: sram: convert rockchip-pmu-sram bindings to yaml

Current dts files with 'rockchip-pmu-sram' compatible nodes
are now verified with sram.yaml, although the original
text document still exists. Merge rockchip-pmu-sram.txt
with sram.yaml by adding it as description with an example.
Make #address-cells, #size-cells and ranges optional
if there are no child nodes to prevent yaml warnings.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

of: fix the warnings from command line.

Gerrit will complain with this warnings:
ERROR: (foo*) should be (foo *)

Signed-off-by: tangjianqiang <tangjianqiang@xiaomi.com>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Merge branch 'dt/linus' into dt/next

kbuild: check libyaml installation for 'make dt_binding_check'

If you run 'make dtbs_check' without installing the libyaml package,
the error message "dtc needs libyaml ..." is shown.

This should be checked also for 'make dt_binding_check' because dtc
needs to validate *.example.dts extracted from *.yaml files.

It is missing since commit 4f0e3a57d6eb ("kbuild: Add support for DT
binding schema checks"), but this fix-up is applicable only after commit
e10c4321dc1e ("kbuild: allow to run dt_binding_check and dtbs_check
in a single command").

I gave the Fixes tag to the latter in case somebody is interested in
back-porting this.

Fixes: e10c4321dc1e ("kbuild: allow to run dt_binding_check and dtbs_check in a single command")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

of: unittest: kmemleak in duplicate property update

kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 5 of 5.

When overlay 'overlay_bad_add_dup_prop' is applied, the apply code
properly detects that a memory leak will occur if the overlay is removed
since the duplicate property is located in a base devicetree node and
reports via printk():

  OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/substation@100/motor-1/rpm_avail
  OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/substation@100/motor-1/rpm_avail

The overlay is removed when the apply code detects multiple changesets
modifying the same property.  This is reported via printk():

  OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/rpm_avail

As a result of this error, the overlay is removed resulting in the
expected memory leak.

Add another device node level to the overlay so that the duplicate
property is located in a node added by the overlay, thus no memory
leak will occur when the overlay is removed.

Thus users of kmemleak will not have to debug this leak in the future.

Fixes: 2fe0e8769df9 ("of: overlay: check prevents multiple fragments touching same property")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>

of: overlay: kmemleak in dup_and_fixup_symbol_prop()

kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 4 of 5.

target_path was not freed in the non-error path.

Fixes: e0a58f3e08d4 ("of: overlay: remove a dependency on device node full_name")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>

of: unittest: kmemleak in of_unittest_overlay_high_level()

kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 3 of 5.

of_unittest_overlay_high_level() failed to kfree the newly created
property when the property named 'name' is skipped.

Fixes: 39a751a4cb7e ("of: change overlay apply input data from unflattened to FDT")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>

of: unittest: kmemleak in of_unittest_platform_populate()

kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 2 of 5.

of_unittest_platform_populate() left an elevated reference count for
grandchild nodes (which are platform devices).  Fix the platform
device reference counts so that the memory will be freed.

Fixes: fb2caa50fbac ("of/selftest: add testcase for nodes with same name and address")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>

of: unittest: kmemleak on changeset destroy

kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 1 of 5.

of_unittest_changeset() reaches deeply into the dynamic devicetree
functions.  Several nodes were left with an elevated reference
count and thus were not properly cleaned up.  Fix the reference
counts so that the memory will be freed.

Fixes: 201c910bd689 ("of: Transactional DT support.")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>

MAINTAINERS: dt: fix pointers for ARM Integrator, Versatile and RealView

There's a conversion from a plain text binding file into 4 yaml ones.
The old file got removed, causing this new warning:

Warning: MAINTAINERS references a file that doesn't exist: Documentation/devicetree/bindings/arm/arm-boards

Address it by replacing the old reference by the new ones

Fixes: 4b900070d50d ("dt-bindings: arm: Add Versatile YAML schema")
Fixes: 2d483550b6d2 ("dt-bindings: arm: Drop the non-YAML bindings")
Fixes: 7db625b9fa75 ("dt-bindings: arm: Add RealView YAML schema")
Fixes: 4fb00d9066c1 ("dt-bindings: arm: Add Versatile Express and Juno YAML schema")
Fixes: 33fbfb3eaf4e ("dt-bindings: arm: Add Integrator YAML schema")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>

MAINTAINERS: dt: update display/allwinner file entry

Changeset f5a98bfe7b37 ("dt-bindings: display: Convert Allwinner display pipeline to schemas")
split Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
into several files. Yet, it kept the old place at MAINTAINERS.

Update it to point to the new place.

Fixes: f5a98bfe7b37 ("dt-bindings: display: Convert Allwinner display pipeline to schemas")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: iio: dac: AD5570R fix bindings errors

Replaced num property with reg property, fixed errors
reported by dt-binding-check.

Fixes: ea52c21268e6 ("dt-bindings: iio: dac: Add docs for AD5770R DAC")
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
[robh: Fix required property list, fix Fixes tag]
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: Clean-up schema indentation formatting

Fix various inconsistencies in schema indentation. Most of these are
list indentation which should be 2 spaces more than the start of the
enclosing keyword. This doesn't matter functionally, but affects running
scripts which do transforms on the schema files.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: input: Convert gpio-keys bindings to schema

Convert the gpio-keys and gpio-keys-polled bindings to a DT schema. As
both bindings are almost the same, combine them into a single schema.

The binding said 'interrupts' was required, but testing on dts files
showed that it isn't required.

'linux,input-value' was only documented for gpio-keys-polled, but there
doesn't seem to be any reason for it to be specific to that. It can work
for gpio-keys too if the GPIO line(s) are available.

Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: Fix misspellings of "Analog Devices"

According to https://www.analog.com/, the company name is spelled
"Analog Devices".

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: pwm: Fix cros-ec-pwm example dtc 'reg' warning

The example for the CrOS EC PWM is incomplete and now generates a dtc
warning:

Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.example.dts:17.11-23.11:
Warning (unit_address_vs_reg): /example-0/cros-ec@0: node has a unit name, but no reg or ranges property

Fixing this results in more warnings as a parent spi node is needed as
well.

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Benson Leung <bleung@chromium.org>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: linux-pwm@vger.kernel.org
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: memory: tegra: Add external memory controller binding for Tegra210

Add the binding document for the external memory controller (EMC) which
communicates with external LPDDR4 devices. It includes the bindings of
the EMC node and a sub-node of EMC table which under the reserved memory
node. The EMC table contains the data of the rates that EMC supported.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: reserved-memory: Introduce memory-region-names

In order to make the reserved-memory bindings more consistent with other
existing bindings, add a memory-region-names property that contains an
array of strings that name the entries of the memory-region property and
allows these regions to be looked up by name.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: vendor-prefixes: Add Check Point

Check Point Software Technologies Ltd. is a company based in Israel and
USA. They manufacture network devices and provide software
products for IT security.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: vendor-prefixes: Add Alps

Alps Electric Co., Ltd. is a japanese electronics company:
https://www.alps.com/

Signed-off-by: Nick Reitemeyer <nick.reitemeyer@web.de>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: memory-controllers: exynos-srom: Remove unneeded type for reg-io-width

'reg-io-width' property is an enum so there is no need to specify its
type.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

docs: dt: rockchip,dwc3.txt: fix a pointer to a renamed file

phy-rockchip-inno-usb2.txt was converted to yaml.

Fix the corresponding reference.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

docs: dt: fix a broken reference for a file converted to json

Changeset 32ced09d7903 ("dt-bindings: serial: Convert slave-device bindings to json-schema")
moved a binding to json and updated the links.

Yet, one link was not changed, due to a merge conflict.

Update this one too.

Fixes: 32ced09d7903 ("dt-bindings: serial: Convert slave-device bindings to json-schema")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

docs: dt: qcom,dwc3.txt: fix cross-reference for a converted file

The qcom-qusb2-phy.txt file was converted and renamed to yaml.
Update cross-reference accordingly.

Fixes: 8ce65d8d38df ("dt-bindings: phy: qcom,qusb2: Convert QUSB2 phy bindings to yaml")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

docs: dt: fix broken reference to phy-cadence-torrent.yaml

This file was removed, and another file was added instead of
it, on two separate commits.

Splitting a single logical change (doc conversion) on two
patches is a bad thing, as it makes harder to discover what
crap happened.

Anyway, this patch fixes the broken reference, making it
pointing to the new location of the file.

Fixes: 922003733d42 ("dt-bindings: phy: Remove Cadence MHDP PHY dt binding")
Fixes: c6d8eef38b7f ("dt-bindings: phy: Add Cadence MHDP PHY bindings in YAML format.")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: interrupt-controller: Fix loongson,parent_int_map property schema

'loongson,parent_int_map' is an array, but the schema is defining a
matrix resulting in the follow warnings:

Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.example.dt.yaml:
  interrupt-controller@3ff01400: loongson,parent_int_map:0: [4043309055] is too short
Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.example.dt.yaml:
  interrupt-controller@3ff01400: loongson,parent_int_map:1: [251658240] is too short
Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.example.dt.yaml:
  interrupt-controller@3ff01400: loongson,parent_int_map:2: [0] is too short
Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.example.dt.yaml:
  interrupt-controller@3ff01400: loongson,parent_int_map:3: [0] is too short

The correct way to define an array is a list in 'items' and/or a size
defined by 'minItems' and 'maxItems'.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: hwmon: Fix incorrect $id paths

Fix the path warnings in the adi,axi-fan-control and adt7475 bindings:

Documentation/devicetree/bindings/hwmon/adt7475.yaml: $id:
  relative path/filename doesn't match actual path or filename
  expected: http://devicetree.org/schemas/hwmon/adt7475.yaml#
Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml: $id:
  relative path/filename doesn't match actual path or filename
  expected: http://devicetree.org/schemas/hwmon/adi,axi-fan-control.yaml#

Cc: Jean Delvare <jdelvare@suse.com>
Cc: linux-hwmon@vger.kernel.org
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: Fix dtc warnings on reg and ranges in examples

A recent update to dtc and changes to the default warnings introduced
some new warnings in the DT binding examples:

Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.example.dts:23.13-61:
 Warning (dma_ranges_format): /example-0/dram-controller@1c01000:dma-ranges: "dma-ranges" property has invalid length (12 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells == 1)
Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.example.dts:17.22-28.11:
 Warning (unit_address_vs_reg): /example-0/fpga-axi@0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.example.dts:34.13-54:
 Warning (dma_ranges_format): /example-0/memory-controller@2c00000:dma-ranges: "dma-ranges" property has invalid length (24 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells == 2)
Documentation/devicetree/bindings/mfd/st,stpmic1.example.dts:19.15-79.11:
 Warning (unit_address_vs_reg): /example-0/i2c@0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.example.dts:28.23-31.15:
 Warning (unit_address_vs_reg): /example-0/mdio@37000000/switch@10: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/rng/brcm,bcm2835.example.dts:17.5-21.11:
 Warning (unit_address_vs_reg): /example-0/rng: node has a reg or ranges property, but no unit name
Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.example.dts:20.20-43.11:
 Warning (unit_address_vs_reg): /example-0/soc@0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/usb/ingenic,musb.example.dts:18.28-21.11:
 Warning (unit_address_vs_reg): /example-0/usb-phy@0: node has a unit name, but no reg or ranges property

Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: "Nuno Sá" <nuno.sa@analog.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-hwmon@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Cc: linux-rpi-kernel@lists.infradead.org
Cc: linux-spi@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: BD718x7 - add missing I2C bus properties

The DT example needs #address-cells and #size-cells for I2C bus or
validity checker will generate warnings. Add these properties in
BD71837 and BD71847 binding examples.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: clock: syscon-icst: Remove unneeded unit name

The following warnings are seen with 'make dt_binding_check':

Documentation/devicetree/bindings/clock/arm,syscon-icst.example.dts:17.16-24.11: Warning (unit_address_vs_reg): /example-0/clock@00: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/clock/arm,syscon-icst.example.dts:17.16-24.11: Warning (unit_address_format): /example-0/clock@00: unit name should not have leading 0s

Fix them by removing the unneeded clock unit name.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: touchscreen: edt-ft5x06: Remove unneeded I2C unit name

The following warnings are seen with 'make dt_binding_check':

Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.example.dts:19.22-30.11: Warning (unit_address_vs_reg): /example-0/i2c@00000000: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.example.dts:19.22-30.11: Warning (unit_address_format): /example-0/i2c@00000000: unit name should not have leading 0s

Fix it by removing the unneeded i2c unit name.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: iio: dac: ad5770r: Fix the file path

The following warning is seen with 'make dt_binding_check':

Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml: $id: relative path/filename doesn't match actual path or filename

Fix it by removing the "bindings" directory from the file path.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: iio: dac: ad5770r: Add vendor to compatible string

The compatible string in the example misses the vendor information.

Pass the "adi" vendor to fix it.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: Add vendor prefix for BeagleBoard.org

Add vendor prefix for BeagleBoard.org Foundation

Signed-off-by: Jason Kridner <jdk@ti.com>
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: net: dwmac: Convert stm32 dwmac to DT schema

Convert stm32 dwmac to DT schema.

Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
[robh: drop dma-ranges from example]
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: net: dwmac: increase 'maxItems' for 'clocks', 'clock-names' properties

This change is needed for some soc based on snps,dwmac, which have
more than 3 clocks.

Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>

of: property: Add device link support for extcon

Add support for creating device links out of more DT properties.

Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: timer: cadence_ttc: Migrate timer-cadence-ttc documentation to YAML

The document was migrated to YAML format and renamed cdns,ttc.yaml.
And updated the example to the latest format.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: i2c: xiic: Migrate i2c-xiic documentation to YAML

The document was migrated to YAML format and renamed xlnx,xps-iic-2.00.a.yaml

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: i2c: cadence: Migrate i2c-cadence documentation to YAML

The document was migrated to YAML format and renamed cdns,i2c-r1p10.yaml

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: vendor-prefixes: Add an entry for Protonic Holland

Add "prt" entry for Protonic Holland: https://www.protonic.nl/en/

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>

of: of_detach_node() remove unneeded local return variable

rc is unneeded, just return 0.

Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: sram: Add Amlogic SCP SRAM compatibles

Add compatibles for the Amlogic SCP SRAM memory zones.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: usb: generic-ohci: Document power-domains property

It is quite common for a generic OHCI block to be embedded in an SoC in
its own power domain.  Hence allow the DTS writer to describe the
controller's position in the power hierarchy, by documenting the
optional presence of a "power-domains" property.

This gets rid of "make dtbs_check" warnings like:

    arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dt.yaml: usb@ee080000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: usb: generic-ehci: Document power-domains property

It is quite common for a generic EHCI block to be embedded in an SoC in
its own power domain.  Hence allow the DTS writer to describe the
controller's position in the power hierarchy, by documenting the
optional presence of a "power-domains" property.

This gets rid of "make dtbs_check" warnings like:

    arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dt.yaml: usb@ee080100: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Linux 5.7-rc1