Colin Ian King [Thu, 9 Feb 2017 11:06:43 +0000 (11:06 +0000)]
staging: rtl8192u: remove redundant null check on array alg
u.crypt.alg is an array of u8 integers and hence the null check on
this array is redundant and can be removed.
Detected with CoverityScan, CID#143214 ("Array compared against 0")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fu Yong Quah [Tue, 7 Feb 2017 03:24:12 +0000 (22:24 -0500)]
staging: rtl8192u: Fix indentation
Fix number of indentaions for block scopes as suggested by
Documentation/CodingStyle.
Signed-off-by: Fu Yong Quah <quah.fy95@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Safonov [Mon, 6 Feb 2017 17:23:28 +0000 (20:23 +0300)]
staging:r8188eu: replace recv_frame->rx_(data|len|tail) with pkt->(data|len|tail) and remove unused recvframe_(put|pull|pull_tail)()
recv_frame->rx_(data|len|tail) duplicate pkt (skb) data|len|tail members
and require special functions recvframe_(put|pull|pull_tail)()
instead of skb_(put|pull|trim).
Replace rx_(data|len|tail) with pkt->(data|len|tail),
remove rx_(data|len|tail) and remove recvframe_(put|pull|pull_tail)().
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Safonov [Mon, 6 Feb 2017 17:23:27 +0000 (20:23 +0300)]
staging:r8188eu: update pkt->(data|tail|len) synchronously with rx_(data|tail|len) in recv_frame structure
Original driver code uses rx_* members to store skb (pkt) fields
(instead of pkt->* members), pkt->* updated only after data
completely formed, not in process.
Update pkt->* after data buffer changed (with rx_*).
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Safonov [Mon, 6 Feb 2017 17:23:26 +0000 (20:23 +0300)]
staging:r8188eu: remove unused rtw_ieee80211_bar structure definition
rtw_ieee80211_bar structure definition does not used. Remove it.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Safonov [Mon, 6 Feb 2017 17:23:25 +0000 (20:23 +0300)]
staging:r8188eu: replace rx_end member of recv_frame with pkt->end
rx_end is duplication of pkt->end pointer.
pkt->end is preferred, because it is native skb field
supported by skb_*() functions.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Carlos Palminha [Thu, 9 Feb 2017 10:18:42 +0000 (10:18 +0000)]
staging: rtl8712: rtl8712: fixed missing conversion to le32
Fixed missing conversion to le32, detected by sparse
(invalid assignment from int to __le32)
Signed-off-by: Carlos Palminha <palminha@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Tue, 7 Feb 2017 13:17:57 +0000 (16:17 +0300)]
Staging: bcm2835-audio: remove unneeded NULL check
We just dereferenced "instance" on the line before so checking it here
is pointless. Anyway, it can't be NULL here so let's remove the check.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Tue, 7 Feb 2017 13:17:34 +0000 (16:17 +0300)]
Staging: bcm2835-audio: fix an uninitialized return value
"ret" isn't necessarily initialized on the success path.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Tue, 7 Feb 2017 13:17:07 +0000 (16:17 +0300)]
staging: bcm2835-audio: off by one in snd_bcm2835_playback_open_generic()
The > should be >= otherwise we write beyond the end of the array when
we do:
chip->alsa_stream[idx] = alsa_stream;
Fixes:
23b028c871e1 ("staging: bcm2835-audio: initial staging submission")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Victor Vaschenko [Mon, 6 Feb 2017 12:48:01 +0000 (15:48 +0300)]
Staging: bcm2835-audio: Fixed that open brace should be on previous line error in bcm2835-ctl.c
Fixed ERROR: that open brace { should be on the previous line.
One coding style correction for better readable code.
Signed-off-by: Victor Vaschenko <vicmos89@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simon Sandström [Tue, 7 Feb 2017 11:03:04 +0000 (12:03 +0100)]
staging: bcm2835-audio: Remove unnecessary space after cast
Fixes checkpatch check "No space is necessary after a cast".
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simon Sandström [Tue, 7 Feb 2017 11:02:43 +0000 (12:02 +0100)]
staging: bcm2835-audio: Rewrite comparison to NULL
Fixes checkpatch check "Comparison to NULL could be written '!chip'".
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simon Sandström [Tue, 7 Feb 2017 11:02:26 +0000 (12:02 +0100)]
staging: bcm2835-audio: Fix argument indentation
Fixes checkpatch CHECK: "Alignment should match open parenthesis".
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simon Sandström [Tue, 7 Feb 2017 11:02:06 +0000 (12:02 +0100)]
staging: bcm2835-audio: Simplify bcm2835_alsa_device_init()
Fixes checkpatch warning "Missing a blank line after declarations".
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simon Sandström [Tue, 7 Feb 2017 11:01:46 +0000 (12:01 +0100)]
staging: bcm2835-audio: Move open brace to correct line
Fixes checkpatch error "open brace { should be on the previous line".
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simon Sandström [Tue, 7 Feb 2017 11:01:27 +0000 (12:01 +0100)]
staging: bcm2835-audio: Remove whitespace before quoted newline
Fixes checkpatch warning "unnecessary whitespace before a quoted
newline".
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simon Sandström [Tue, 7 Feb 2017 11:01:10 +0000 (12:01 +0100)]
staging: bcm2835-audio: Remove incorrect whitespace
According to the coding style, "bcm2835_ship ** rchip" should be
"bcm2835 **rchip".
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simon Sandström [Tue, 7 Feb 2017 11:00:56 +0000 (12:00 +0100)]
staging: bcm2835-audio: Remove static initialisation
Static pointers are explicility initialised to NULL.
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Javier Rodriguez [Mon, 6 Feb 2017 17:19:32 +0000 (18:19 +0100)]
staging: gdm724x: fix incorrect type in assignment
Fix sparse warning issue.
drivers/staging/gdm724x/gdm_lte.c:201:33: warning: incorrect type in assignment (different base types)
drivers/staging/gdm724x/gdm_lte.c:201:33: expected unsigned int [unsigned] [addressable] [usertype] ph_len
drivers/staging/gdm724x/gdm_lte.c:201:33: got restricted __be16 [usertype] payload_len
Signed-off-by: Javier Rodriguez <jrodbar@yahoo.es>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Wed, 8 Feb 2017 07:18:08 +0000 (10:18 +0300)]
staging: gdm724x: fix a couple array overflows
The find_dev_index() function is frustrating. If you give it an invalid
index then it returns 0. That was the intent except there is an
off-by-one so it can return MAX_NIC_TYPE which is one higher than we
want.
There is one caller which had a sanity check to catch invalid returns,
but the other two callers assumed that index was valid.
My feeling is that when we are given invalid indexes, that should be
treated like an error and we abandon what we were doing.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
stephen knipe [Wed, 8 Feb 2017 19:27:46 +0000 (20:27 +0100)]
staging: most: dim2_hdm octal permissions fix
This patch is to make the permissions sent to module_param be
explicitly octal in accordance with the linux style conventions. Issues
found by checkpatch.pl.
Signed-off-by: stephen knipe <steve.knipe@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Derek Robson [Mon, 6 Feb 2017 02:28:13 +0000 (15:28 +1300)]
Staging: speakup: speakup.h - remove unused define
As part of cleaning up symbolic permissions found define that is not used.
Signed-off-by: Derek Robson <robsonde@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Mon, 23 Jan 2017 12:04:14 +0000 (13:04 +0100)]
staging: greybus: operation: add generic timeout support
Add a struct timer_list to struct gb_operation and use that to implement
generic operation timeouts.
This simplifies the synchronous operation handling somewhat while also
providing a generic timeout mechanism that drivers can use for
asynchronous operations.
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Mon, 6 Feb 2017 08:36:10 +0000 (09:36 +0100)]
Merge 4.10-rc7 into staging-next
This resolves the merge errors that were reported in linux-next and it
picks up the staging and IIO fixes that we need/want in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sun, 5 Feb 2017 23:10:58 +0000 (15:10 -0800)]
Linux 4.10-rc7
Umang Raghuvanshi [Sun, 5 Feb 2017 14:52:45 +0000 (20:22 +0530)]
staging: fbtft: fix unaligned parentheses
Fix the following formatting issues:
CHECK: Alignment should match open parenthesis
Signed-off-by: Umang Raghuvanshi <u@umangis.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Derek Robson [Sat, 4 Feb 2017 04:49:00 +0000 (17:49 +1300)]
Drivers: staging: speakup: spk_priv.h - style fix
Changed function definition argument to have identifier name.
found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stafford Horne [Sun, 5 Feb 2017 07:07:33 +0000 (16:07 +0900)]
staging: vchip_shim: Remove unneeded stddef.h include
Building on openrisc musl toolchain this causes the allyesconfig build
to fail.
drivers/staging/vc04_services/interface/vchiq_arm/vchiq_shim.c:42:20:
fatal error: stddef.h: No such file or directory
Removing this causes no issues with the build.
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simon Sandström [Sat, 4 Feb 2017 17:09:39 +0000 (18:09 +0100)]
staging: vt6656: Add missing identifier names
Fix all "function definition argument '...' should also have an
identifier name" warnings in vt6656. Use identifier name from each
corresponding C file.
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Rupprecht [Fri, 3 Feb 2017 17:06:17 +0000 (18:06 +0100)]
Staging: bcm2835-audio: removed spaces around parenthesis
Removed unnecessary spaces around parenthesis as reported by checkpatch.pl
Signed-off-by: Michael Rupprecht <mail.michaelrupprecht@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhengyi Shen [Fri, 3 Feb 2017 14:54:06 +0000 (22:54 +0800)]
staging:most/hdm-i2c: Replace symbolic permissions with octal permissions
WARNING: Symbolic permissions 'S_IRUGO' are not preferred.
Consider using octal permissions '0444'.
This warning was detected by checkpatch.pl for hdm_i2c.c.
Signed-off-by: Zhengyi Shen <shenzhengyi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kamal Heib [Fri, 3 Feb 2017 14:02:24 +0000 (16:02 +0200)]
staging: octeon: Fix line over 80 characters
This patch fix the line over 80 characters warning that was detected
using checkpatch.pl script.
Fixes:
6fe5efa1415c ('staging: octeon: Convert create_singlethread_workqueue()')
Cc: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sat, 4 Feb 2017 20:18:01 +0000 (12:18 -0800)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
- Prevent double activation of interrupt lines, which causes problems
on certain interrupt controllers
- Handle the fallout of the above because x86 (ab)uses the activation
function to reconfigure interrupts under the hood.
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Make irq activate operations symmetric
irqdomain: Avoid activating interrupts more than once
Linus Torvalds [Sat, 4 Feb 2017 20:07:54 +0000 (12:07 -0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull KVM fix from Radim Krčmář:
"Fix a regression that prevented migration between hosts with different
XSAVE features even if the missing features were not used by the guest
(for stable)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: do not save guest-unsupported XSAVE state
Linus Torvalds [Sat, 4 Feb 2017 18:44:15 +0000 (10:44 -0800)]
Merge tag 'char-misc-4.10-rc7' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are two bugfixes that resolve some reported issues. One in the
firmware loader, that should fix the much-reported problem of crashes
with it. The other is a hyperv fix for a reported regression.
Both have been in linux-next for a week or so with no reported issues"
* tag 'char-misc-4.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Drivers: hv: vmbus: finally fix hv_need_to_signal_on_read()
firmware: fix NULL pointer dereference in __fw_load_abort()
Linus Torvalds [Sat, 4 Feb 2017 18:38:09 +0000 (10:38 -0800)]
Merge tag 'staging-4.10-rc7' of git://git./linux/kernel/git/gregkh/staging
Pull staging/IIO fixes from Greg KH:
"Here are a few small IIO and one staging driver fix for 4.10-rc7. They
fix some reported issues with the drivers.
All of them have been in linux-next for a week or so with no reported
issues"
* tag 'staging-4.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: greybus: timesync: validate platform state callback
iio: dht11: Use usleep_range instead of msleep for start signal
iio: adc: palmas_gpadc: retrieve a valid iio_dev in suspend/resume
iio: health: max30100: fixed parenthesis around FIFO count check
iio: health:
afe4404: retrieve a valid iio_dev in suspend/resume
iio: health:
afe4403: retrieve a valid iio_dev in suspend/resume
Linus Torvalds [Sat, 4 Feb 2017 18:35:55 +0000 (10:35 -0800)]
Merge tag 'usb-4.10-rc7' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for some reported issues, and the usual
number of new device ids for 4.10-rc7.
All of these, except the last new device id, have been in linux-next
for a while with no reported issues"
* tag 'usb-4.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: pl2303: add ATEN device ID
usb: gadget: f_fs: Assorted buffer overflow checks.
USB: Add quirk for WORLDE easykey.25 MIDI keyboard
usb: musb: Fix external abort on non-linefetch for musb_irq_work()
usb: musb: Fix host mode error -71 regression
USB: serial: option: add device ID for HP lt2523 (Novatel E371)
USB: serial: qcserial: add Dell DW5570 QDL
Linus Torvalds [Sat, 4 Feb 2017 00:18:51 +0000 (16:18 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"A single fix this time: a fix for a virtqueue removal bug which only
appears to affect S390, but which results in the queue hanging forever
thus causing the machine to fail shutdown"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: virtio_scsi: Reject commands when virtqueue is broken
Linus Torvalds [Fri, 3 Feb 2017 23:43:30 +0000 (15:43 -0800)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio/vhost fixes from Michael S. Tsirkin:
"Last minute fixes:
- ARM DMA fix revert
- vhost endian-ness fix
- MAINTAINERS: email address change for Amit"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
MAINTAINERS: update email address for Amit Shah
vhost: fix initialization for vq->is_le
Revert "vring: Force use of DMA API for ARM-based systems with legacy devices"
Linus Torvalds [Fri, 3 Feb 2017 23:38:53 +0000 (15:38 -0800)]
Merge tag 'vfio-v4.10-rc7' of git://github.com/awilliam/linux-vfio
Pull VFIO fix from Alex Williamson:
"Fix an error path in SPAPR IOMMU backend (Alexey Kardashevskiy)"
* tag 'vfio-v4.10-rc7' of git://github.com/awilliam/linux-vfio:
vfio/spapr: Fix missing mutex unlock when creating a window
Linus Torvalds [Fri, 3 Feb 2017 22:50:42 +0000 (14:50 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge fixes from Andrew Morton:
"8 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm, fs: check for fatal signals in do_generic_file_read()
fs: break out of iomap_file_buffered_write on fatal signals
base/memory, hotplug: fix a kernel oops in show_valid_zones()
mm/memory_hotplug.c: check start_pfn in test_pages_in_a_zone()
jump label: pass kbuild_cflags when checking for asm goto support
shmem: fix sleeping from atomic context
kasan: respect /proc/sys/kernel/traceoff_on_warning
zswap: disable changing params if init fails
Michal Hocko [Fri, 3 Feb 2017 21:13:29 +0000 (13:13 -0800)]
mm, fs: check for fatal signals in do_generic_file_read()
do_generic_file_read() can be told to perform a large request from
userspace. If the system is under OOM and the reading task is the OOM
victim then it has an access to memory reserves and finishing the full
request can lead to the full memory depletion which is dangerous. Make
sure we rather go with a short read and allow the killed task to
terminate.
Link: http://lkml.kernel.org/r/20170201092706.9966-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 3 Feb 2017 21:13:26 +0000 (13:13 -0800)]
fs: break out of iomap_file_buffered_write on fatal signals
Tetsuo has noticed that an OOM stress test which performs large write
requests can cause the full memory reserves depletion. He has tracked
this down to the following path
__alloc_pages_nodemask+0x436/0x4d0
alloc_pages_current+0x97/0x1b0
__page_cache_alloc+0x15d/0x1a0 mm/filemap.c:728
pagecache_get_page+0x5a/0x2b0 mm/filemap.c:1331
grab_cache_page_write_begin+0x23/0x40 mm/filemap.c:2773
iomap_write_begin+0x50/0xd0 fs/iomap.c:118
iomap_write_actor+0xb5/0x1a0 fs/iomap.c:190
? iomap_write_end+0x80/0x80 fs/iomap.c:150
iomap_apply+0xb3/0x130 fs/iomap.c:79
iomap_file_buffered_write+0x68/0xa0 fs/iomap.c:243
? iomap_write_end+0x80/0x80
xfs_file_buffered_aio_write+0x132/0x390 [xfs]
? remove_wait_queue+0x59/0x60
xfs_file_write_iter+0x90/0x130 [xfs]
__vfs_write+0xe5/0x140
vfs_write+0xc7/0x1f0
? syscall_trace_enter+0x1d0/0x380
SyS_write+0x58/0xc0
do_syscall_64+0x6c/0x200
entry_SYSCALL64_slow_path+0x25/0x25
the oom victim has access to all memory reserves to make a forward
progress to exit easier. But iomap_file_buffered_write and other
callers of iomap_apply loop to complete the full request. We need to
check for fatal signals and back off with a short write instead.
As the iomap_apply delegates all the work down to the actor we have to
hook into those. All callers that work with the page cache are calling
iomap_write_begin so we will check for signals there. dax_iomap_actor
has to handle the situation explicitly because it copies data to the
userspace directly. Other callers like iomap_page_mkwrite work on a
single page or iomap_fiemap_actor do not allocate memory based on the
given len.
Fixes:
68a9f5e7007c ("xfs: implement iomap based buffered write path")
Link: http://lkml.kernel.org/r/20170201092706.9966-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org> [4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Toshi Kani [Fri, 3 Feb 2017 21:13:23 +0000 (13:13 -0800)]
base/memory, hotplug: fix a kernel oops in show_valid_zones()
Reading a sysfs "memoryN/valid_zones" file leads to the following oops
when the first page of a range is not backed by struct page.
show_valid_zones() assumes that 'start_pfn' is always valid for
page_zone().
BUG: unable to handle kernel paging request at
ffffea017a000000
IP: show_valid_zones+0x6f/0x160
This issue may happen on x86-64 systems with 64GiB or more memory since
their memory block size is bumped up to 2GiB. [1] An example of such
systems is desribed below. 0x3240000000 is only aligned by 1GiB and
this memory block starts from 0x3200000000, which is not backed by
struct page.
BIOS-e820: [mem 0x0000003240000000-0x000000603fffffff] usable
Since test_pages_in_a_zone() already checks holes, fix this issue by
extending this function to return 'valid_start' and 'valid_end' for a
given range. show_valid_zones() then proceeds with the valid range.
[1] 'Commit
bdee237c0343 ("x86: mm: Use 2GB memory block size on
large-memory x86-64 systems")'
Link: http://lkml.kernel.org/r/20170127222149.30893-3-toshi.kani@hpe.com
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Zhang Zhen <zhenzhang.zhang@huawei.com>
Cc: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org> [4.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Toshi Kani [Fri, 3 Feb 2017 21:13:20 +0000 (13:13 -0800)]
mm/memory_hotplug.c: check start_pfn in test_pages_in_a_zone()
Patch series "fix a kernel oops when reading sysfs valid_zones", v2.
A sysfs memory file is created for each 2GiB memory block on x86-64 when
the system has 64GiB or more memory. [1] When the start address of a
memory block is not backed by struct page, i.e. a memory range is not
aligned by 2GiB, reading its 'valid_zones' attribute file leads to a
kernel oops. This issue was observed on multiple x86-64 systems with
more than 64GiB of memory. This patch-set fixes this issue.
Patch 1 first fixes an issue in test_pages_in_a_zone(), which does not
test the start section.
Patch 2 then fixes the kernel oops by extending test_pages_in_a_zone()
to return valid [start, end).
Note for stable kernels: The memory block size change was made by commit
bdee237c0343 ("x86: mm: Use 2GB memory block size on large-memory x86-64
systems"), which was accepted to 3.9. However, this patch-set depends
on (and fixes) the change to test_pages_in_a_zone() made by commit
5f0f2887f4de ("mm/memory_hotplug.c: check for missing sections in
test_pages_in_a_zone()"), which was accepted to 4.4.
So, I recommend that we backport it up to 4.4.
[1] 'Commit
bdee237c0343 ("x86: mm: Use 2GB memory block size on
large-memory x86-64 systems")'
This patch (of 2):
test_pages_in_a_zone() does not check 'start_pfn' when it is aligned by
section since 'sec_end_pfn' is set equal to 'pfn'. Since this function
is called for testing the range of a sysfs memory file, 'start_pfn' is
always aligned by section.
Fix it by properly setting 'sec_end_pfn' to the next section pfn.
Also make sure that this function returns 1 only when the range belongs
to a zone.
Link: http://lkml.kernel.org/r/20170127222149.30893-2-toshi.kani@hpe.com
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Andrew Banman <abanman@sgi.com>
Cc: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: Greg KH <greg@kroah.com>
Cc: <stable@vger.kernel.org> [4.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Lin [Fri, 3 Feb 2017 21:13:18 +0000 (13:13 -0800)]
jump label: pass kbuild_cflags when checking for asm goto support
Some versions of ARM GCC compiler such as Android toolchain throws in a
'-fpic' flag by default. This causes the gcc-goto check script to fail
although some config would have '-fno-pic' flag in the KBUILD_CFLAGS.
This patch passes the KBUILD_CFLAGS to the check script so that the
script does not rely on the default config from different compilers.
Link: http://lkml.kernel.org/r/20170120234329.78868-1-dtwlin@google.com
Signed-off-by: David Lin <dtwlin@google.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Michal Marek <mmarek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill A. Shutemov [Fri, 3 Feb 2017 21:13:15 +0000 (13:13 -0800)]
shmem: fix sleeping from atomic context
Syzkaller fuzzer managed to trigger this:
BUG: sleeping function called from invalid context at mm/shmem.c:852
in_atomic(): 1, irqs_disabled(): 0, pid: 529, name: khugepaged
3 locks held by khugepaged/529:
#0: (shrinker_rwsem){++++..}, at: [<
ffffffff818d7ef1>] shrink_slab.part.59+0x121/0xd30 mm/vmscan.c:451
#1: (&type->s_umount_key#29){++++..}, at: [<
ffffffff81a63630>] trylock_super+0x20/0x100 fs/super.c:392
#2: (&(&sbinfo->shrinklist_lock)->rlock){+.+.-.}, at: [<
ffffffff818fd83e>] spin_lock include/linux/spinlock.h:302 [inline]
#2: (&(&sbinfo->shrinklist_lock)->rlock){+.+.-.}, at: [<
ffffffff818fd83e>] shmem_unused_huge_shrink+0x28e/0x1490 mm/shmem.c:427
CPU: 2 PID: 529 Comm: khugepaged Not tainted 4.10.0-rc5+ #201
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
shmem_undo_range+0xb20/0x2710 mm/shmem.c:852
shmem_truncate_range+0x27/0xa0 mm/shmem.c:939
shmem_evict_inode+0x35f/0xca0 mm/shmem.c:1030
evict+0x46e/0x980 fs/inode.c:553
iput_final fs/inode.c:1515 [inline]
iput+0x589/0xb20 fs/inode.c:1542
shmem_unused_huge_shrink+0xbad/0x1490 mm/shmem.c:446
shmem_unused_huge_scan+0x10c/0x170 mm/shmem.c:512
super_cache_scan+0x376/0x450 fs/super.c:106
do_shrink_slab mm/vmscan.c:378 [inline]
shrink_slab.part.59+0x543/0xd30 mm/vmscan.c:481
shrink_slab mm/vmscan.c:2592 [inline]
shrink_node+0x2c7/0x870 mm/vmscan.c:2592
shrink_zones mm/vmscan.c:2734 [inline]
do_try_to_free_pages+0x369/0xc80 mm/vmscan.c:2776
try_to_free_pages+0x3c6/0x900 mm/vmscan.c:2982
__perform_reclaim mm/page_alloc.c:3301 [inline]
__alloc_pages_direct_reclaim mm/page_alloc.c:3322 [inline]
__alloc_pages_slowpath+0xa24/0x1c30 mm/page_alloc.c:3683
__alloc_pages_nodemask+0x544/0xae0 mm/page_alloc.c:3848
__alloc_pages include/linux/gfp.h:426 [inline]
__alloc_pages_node include/linux/gfp.h:439 [inline]
khugepaged_alloc_page+0xc2/0x1b0 mm/khugepaged.c:750
collapse_huge_page+0x182/0x1fe0 mm/khugepaged.c:955
khugepaged_scan_pmd+0xfdf/0x12a0 mm/khugepaged.c:1208
khugepaged_scan_mm_slot mm/khugepaged.c:1727 [inline]
khugepaged_do_scan mm/khugepaged.c:1808 [inline]
khugepaged+0xe9b/0x1590 mm/khugepaged.c:1853
kthread+0x326/0x3f0 kernel/kthread.c:227
ret_from_fork+0x31/0x40 arch/x86/entry/entry_64.S:430
The iput() from atomic context was a bad idea: if after igrab() somebody
else calls iput() and we left with the last inode reference, our iput()
would lead to inode eviction and therefore sleeping.
This patch should fix the situation.
Link: http://lkml.kernel.org/r/20170131093141.GA15899@node.shutemov.name
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Zijlstra [Fri, 3 Feb 2017 21:13:12 +0000 (13:13 -0800)]
kasan: respect /proc/sys/kernel/traceoff_on_warning
After much waiting I finally reproduced a KASAN issue, only to find my
trace-buffer empty of useful information because it got spooled out :/
Make kasan_report honour the /proc/sys/kernel/traceoff_on_warning
interface.
Link: http://lkml.kernel.org/r/20170125164106.3514-1-aryabinin@virtuozzo.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Streetman [Fri, 3 Feb 2017 21:13:09 +0000 (13:13 -0800)]
zswap: disable changing params if init fails
Add zswap_init_failed bool that prevents changing any of the module
params, if init_zswap() fails, and set zswap_enabled to false. Change
'enabled' param to a callback, and check zswap_init_failed before
allowing any change to 'enabled', 'zpool', or 'compressor' params.
Any driver that is built-in to the kernel will not be unloaded if its
init function returns error, and its module params remain accessible for
users to change via sysfs. Since zswap uses param callbacks, which
assume that zswap has been initialized, changing the zswap params after
a failed initialization will result in WARNING due to the param
callbacks expecting a pool to already exist. This prevents that by
immediately exiting any of the param callbacks if initialization failed.
This was reported here:
https://marc.info/?l=linux-mm&m=
147004228125528&w=4
And fixes this WARNING:
[ 429.723476] WARNING: CPU: 0 PID: 5140 at mm/zswap.c:503 __zswap_pool_current+0x56/0x60
The warning is just noise, and not serious. However, when init fails,
zswap frees all its percpu dstmem pages and its kmem cache. The kmem
cache might be serious, if kmem_cache_alloc(NULL, gfp) has problems; but
the percpu dstmem pages are definitely a problem, as they're used as
temporary buffer for compressed pages before copying into place in the
zpool.
If the user does get zswap enabled after an init failure, then zswap
will likely Oops on the first page it tries to compress (or worse, start
corrupting memory).
Fixes:
90b0fc26d5db ("zswap: change zpool/compressor at runtime")
Link: http://lkml.kernel.org/r/20170124200259.16191-2-ddstreet@ieee.org
Signed-off-by: Dan Streetman <dan.streetman@canonical.com>
Reported-by: Marcin Miroslaw <marcin@mejor.pl>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 3 Feb 2017 21:46:38 +0000 (13:46 -0800)]
Merge tag 'regulator-fix-v4.10-rc6' of git://git./linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"Three changes here: two run of the mill driver specific fixes and a
change from Mark Rutland which reverts some new device specific ACPI
binding code which was added during the merge window as there are
concerns about this sending the wrong signal about usage of regulators
in ACPI systems"
* tag 'regulator-fix-v4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: fixed: Revert support for ACPI interface
regulator: axp20x: AXP806: Fix dcdcb being set instead of dcdce
regulator: twl6030: fix range comparison, allowing vsel = 59
Amit Shah [Fri, 3 Feb 2017 11:18:14 +0000 (16:48 +0530)]
MAINTAINERS: update email address for Amit Shah
I'm leaving my job at Red Hat, this email address will stop working next week.
Update it to one that I will have access to later.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Halil Pasic [Mon, 30 Jan 2017 10:09:36 +0000 (11:09 +0100)]
vhost: fix initialization for vq->is_le
Currently, under certain circumstances vhost_init_is_le does just a part
of the initialization job, and depends on vhost_reset_is_le being called
too. For this reason vhost_vq_init_access used to call vhost_reset_is_le
when vq->private_data is NULL. This is not only counter intuitive, but
also real a problem because it breaks vhost_net. The bug was introduced to
vhost_net with commit
2751c9882b94 ("vhost: cross-endian support for
legacy devices"). The symptom is corruption of the vq's used.idx field
(virtio) after VHOST_NET_SET_BACKEND was issued as a part of the vhost
shutdown on a vq with pending descriptors.
Let us make sure the outcome of vhost_init_is_le never depend on the state
it is actually supposed to initialize, and fix virtio_net by removing the
reset from vhost_vq_init_access.
With the above, there is no reason for vhost_reset_is_le to do just half
of the job. Let us make vhost_reset_is_le reinitialize is_le.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reported-by: Michael A. Tebolt <miket@us.ibm.com>
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixes: commit
2751c9882b94 ("vhost: cross-endian support for legacy devices")
Cc: <stable@vger.kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Michael A. Tebolt <miket@us.ibm.com>
Michael S. Tsirkin [Fri, 3 Feb 2017 03:43:52 +0000 (05:43 +0200)]
Revert "vring: Force use of DMA API for ARM-based systems with legacy devices"
This reverts commit
c7070619f3408d9a0dffbed9149e6f00479cf43b.
This has been shown to regress on some ARM systems:
by forcing on DMA API usage for ARM systems, we have inadvertently
kicked open a hornets' nest in terms of cache-coherency. Namely that
unless the virtio device is explicitly described as capable of coherent
DMA by firmware, the DMA APIs on ARM and other DT-based platforms will
assume it is non-coherent. This turns out to cause a big problem for the
likes of QEMU and kvmtool, which generate virtio-mmio devices in their
guest DTs but neglect to add the often-overlooked "dma-coherent"
property; as a result, we end up with the guest making non-cacheable
accesses to the vring, the host doing so cacheably, both talking past
each other and things going horribly wrong.
We are working on a safer work-around.
Fixes:
c7070619f340 ("vring: Force use of DMA API for ARM-based systems with legacy devices")
Reported-by: Robin Murphy <robin.murphy@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Greg Kroah-Hartman [Fri, 3 Feb 2017 21:19:15 +0000 (22:19 +0100)]
Merge tag 'usb-serial-4.10-rc7' of git://git./linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for v4.10-rc7
One more device ID for pl2303.
Signed-off-by: Johan Hovold <johan@kernel.org>
Linus Torvalds [Fri, 3 Feb 2017 20:01:54 +0000 (12:01 -0800)]
Merge tag 'mmc-v4.10-rc6' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC fix from Ulf Hansson:
"MMC host: sdhci: Avoid hang when receiving spurious CARD_INT
interrupts"
* tag 'mmc-v4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci: Ignore unexpected CARD_INT interrupts
Linus Torvalds [Fri, 3 Feb 2017 19:32:25 +0000 (11:32 -0800)]
Merge tag 'drm-fixes-for-v4.10-rc7' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Another fixes pull for v4.10, it's a bit big due to the backport of
the VMA fixes for i915 that should fix the oops on shutdown problems
that you've worked around.
There are also two drm core connector registration fixes, a bunch of
nouveau regression fixes and two AMD fixes"
* tag 'drm-fixes-for-v4.10-rc7' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: Fix vram_size/visible values in DRM_RADEON_GEM_INFO ioctl
drm/amdgpu/si: fix crash on headless asics
drm/i915: Track pinned vma in intel_plane_state
drm/atomic: Unconditionally call prepare_fb.
drm/atomic: Fix double free in drm_atomic_state_default_clear
drm/nouveau/kms/nv50: request vblank events for commits that send completion events
drm/nouveau/nv1a,nv1f/disp: fix memory clock rate retrieval
drm/nouveau/disp/gt215: Fix HDA ELD handling (thus, HDMI audio) on gt215
drm/nouveau/nouveau/led: prevent compiling the led-code if nouveau=y and leds=m
drm/nouveau/disp/mcp7x: disable dptmds workaround
drm/nouveau: prevent userspace from deleting client object
drm/nouveau/fence/g84-: protect against concurrent access to semaphore buffers
drm: Don't race connector registration
drm: prevent double-(un)registration for connectors
Linus Torvalds [Fri, 3 Feb 2017 19:10:06 +0000 (11:10 -0800)]
Merge tag 'powerpc-4.10-3' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"The main change is we're reverting the initial stack protector support
we merged this cycle. It turns out to not work on toolchains built
with libc support, and fixing it will be need to wait for another
release.
And the rest are all fairly minor:
- Some pasemi machines were not booting due to a missing error check
in prom_find_boot_cpu()
- In EEH we were checking a pointer rather than the bool it pointed
to
- The clang build was broken by a BUILD_BUG_ON() we added.
- The radix (Power9 only) version of map_kernel_page() was broken if
our memory size was a multiple of 2MB, which it generally isn't
Thanks to: Darren Stevens, Gavin Shan, Reza Arbab"
* tag 'powerpc-4.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm: Use the correct pointer when setting a 2MB pte
powerpc: Fix build failure with clang due to BUILD_BUG_ON()
powerpc: Revert the initial stack protector support
powerpc/eeh: Fix wrong flag passed to eeh_unfreeze_pe()
powerpc: Add missing error check to prom_find_boot_cpu()
Linus Torvalds [Fri, 3 Feb 2017 19:06:59 +0000 (11:06 -0800)]
Merge tag 'trace-v4.10-rc2-2' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Simple fix of s/static struct __init/static __init struct/"
* tag 'trace-v4.10-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/kprobes: Fix __init annotation
Linus Torvalds [Fri, 3 Feb 2017 18:30:27 +0000 (10:30 -0800)]
Merge branch 'modversions' (modversions fixes for powerpc from Ard)
Merge kcrctab entry fixes from Ard Biesheuvel:
"This is a followup to [0] 'modversions: redefine kcrctab entries as
relative CRC pointers', but since relative CRC pointers do not work in
modules, and are actually only needed by powerpc with
CONFIG_RELOCATABLE=y, I have made it a Kconfig selectable feature
instead.
First it introduces the MODULE_REL_CRCS Kconfig symbol, and adds the
kbuild handling of it, i.e., modpost, genksyms and kallsyms.
Then it switches all architectures to 32-bit CRC entries in kcrctab,
where all architectures except powerpc with CONFIG_RELOCATABLE=y use
absolute ELF symbol references as before"
[0] http://marc.info/?l=linux-arch&m=
148493613415294&w=2
* emailed patches from Ard Biesheuvel:
module: unify absolute krctab definitions for 32-bit and 64-bit
modversions: treat symbol CRCs as 32 bit quantities
kbuild: modversions: add infrastructure for emitting relative CRCs
Ard Biesheuvel [Thu, 2 Feb 2017 18:05:26 +0000 (18:05 +0000)]
log2: make order_base_2() behave correctly on const input value zero
The function order_base_2() is defined (according to the comment block)
as returning zero on input zero, but subsequently passes the input into
roundup_pow_of_two(), which is explicitly undefined for input zero.
This has gone unnoticed until now, but optimization passes in GCC 7 may
produce constant folded function instances where a constant value of
zero is passed into order_base_2(), resulting in link errors against the
deliberately undefined '____ilog2_NaN'.
So update order_base_2() to adhere to its own documented interface.
[ See
http://marc.info/?l=linux-kernel&m=
147672952517795&w=2
and follow-up discussion for more background. The gcc "optimization
pass" is really just broken, but now the GCC trunk problem seems to
have escaped out of just specially built daily images, so we need to
work around it in mainline. - Linus ]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Radim Krčmář [Wed, 1 Feb 2017 13:19:53 +0000 (14:19 +0100)]
KVM: x86: do not save guest-unsupported XSAVE state
Saving unsupported state prevents migration when the new host does not
support a XSAVE feature of the original host, even if the feature is not
exposed to the guest.
We've masked host features with guest-visible features before, with
4344ee981e21 ("KVM: x86: only copy XSAVE state for the supported
features") and dropped it when implementing XSAVES. Do it again.
Fixes:
df1daba7d1cb ("KVM: x86: support XSAVES usage in the host")
Cc: stable@vger.kernel.org
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Ard Biesheuvel [Fri, 3 Feb 2017 09:54:07 +0000 (09:54 +0000)]
module: unify absolute krctab definitions for 32-bit and 64-bit
The previous patch introduced a separate inline asm version of the
krcrctab declaration template for use with 64-bit architectures, which
cannot refer to ELF symbols using 32-bit quantities.
This declaration should be equivalent to the C one for 32-bit
architectures, but just in case - unify them in a separate patch, which
can simply be dropped if it turns out to break anything.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ard Biesheuvel [Fri, 3 Feb 2017 09:54:06 +0000 (09:54 +0000)]
modversions: treat symbol CRCs as 32 bit quantities
The modversion symbol CRCs are emitted as ELF symbols, which allows us
to easily populate the kcrctab sections by relying on the linker to
associate each kcrctab slot with the correct value.
This has a couple of downsides:
- Given that the CRCs are treated as memory addresses, we waste 4 bytes
for each CRC on 64 bit architectures,
- On architectures that support runtime relocation, a R_<arch>_RELATIVE
relocation entry is emitted for each CRC value, which identifies it
as a quantity that requires fixing up based on the actual runtime
load offset of the kernel. This results in corrupted CRCs unless we
explicitly undo the fixup (and this is currently being handled in the
core module code)
- Such runtime relocation entries take up 24 bytes of __init space
each, resulting in a x8 overhead in [uncompressed] kernel size for
CRCs.
Switching to explicit 32 bit values on 64 bit architectures fixes most
of these issues, given that 32 bit values are not treated as quantities
that require fixing up based on the actual runtime load offset. Note
that on some ELF64 architectures [such as PPC64], these 32-bit values
are still emitted as [absolute] runtime relocatable quantities, even if
the value resolves to a build time constant. Since relative relocations
are always resolved at build time, this patch enables MODULE_REL_CRCS on
powerpc when CONFIG_RELOCATABLE=y, which turns the absolute CRC
references into relative references into .rodata where the actual CRC
value is stored.
So redefine all CRC fields and variables as u32, and redefine the
__CRC_SYMBOL() macro for 64 bit builds to emit the CRC reference using
inline assembler (which is necessary since 64-bit C code cannot use
32-bit types to hold memory addresses, even if they are ultimately
resolved using values that do not exceed 0xffffffff). To avoid
potential problems with legacy 32-bit architectures using legacy
toolchains, the equivalent C definition of the kcrctab entry is retained
for 32-bit architectures.
Note that this mostly reverts commit
d4703aefdbc8 ("module: handle ppc64
relocating kcrctabs when CONFIG_RELOCATABLE=y")
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ard Biesheuvel [Fri, 3 Feb 2017 09:54:05 +0000 (09:54 +0000)]
kbuild: modversions: add infrastructure for emitting relative CRCs
This add the kbuild infrastructure that will allow architectures to emit
vmlinux symbol CRCs as 32-bit offsets to another location in the kernel
where the actual value is stored. This works around problems with CRCs
being mistaken for relocatable symbols on kernels that self relocate at
runtime (i.e., powerpc with CONFIG_RELOCATABLE=y)
For the kbuild side of things, this comes down to the following:
- introducing a Kconfig symbol MODULE_REL_CRCS
- adding a -R switch to genksyms to instruct it to emit the CRC symbols
as references into the .rodata section
- making modpost distinguish such references from absolute CRC symbols
by the section index (SHN_ABS)
- making kallsyms disregard non-absolute symbols with a __crc_ prefix
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Seraphime Kirkovski [Thu, 2 Feb 2017 23:12:43 +0000 (00:12 +0100)]
staging: bcm2835: cleanup: remove deprecated <asm/uaccess.h> include
This replaces the last occurrence of the deprecated <asm/uaccess.h> include
in the staging directory with the newer <linux/uaccess.h>
Signed-off-by: Seraphime Kirkovski <kirkseraph@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Mon, 30 Jan 2017 10:51:49 +0000 (13:51 +0300)]
staging: lustre: libcfs: double copy bug
The problem is that we copy hdr.ioc_len, we verify it, then we copy it
again without checking to see if it has changed in between the two
copies.
This could result in an information leak.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhengyi Shen [Thu, 2 Feb 2017 15:28:21 +0000 (23:28 +0800)]
staging: lustre: fix coding style issue in vvp_page.c
This is a patch to fix "WARNING: line over 80 characters" found by
checkpatch.pl in vvp_page.c.
Signed-off-by: Zhengyi Shen <shenzhengyi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Simmons [Sun, 29 Jan 2017 00:05:27 +0000 (19:05 -0500)]
staging: lustre: ptlrpc : remove userland usage from ptlrpc
The reason for __REQ_LAYOUT_USER__ was to expose a
section of code in layout.c to userland for a utility
similar to wireshark. This was done before wireshark
existed but now that it does we no longer need to do
this type of hack. This also reduces lustre_acl.h to
strictly a kernel header now.
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8945
Reviewed-on: https://review.whamcloud.com/24396
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Simmons [Sun, 29 Jan 2017 00:05:26 +0000 (19:05 -0500)]
staging: lustre: osc: avoid 64 divide in osc_cache_too_much
The use of 64 bit time introduces an expensive 64 bit
division operation. Since the time lapse being calculated
in osc_cache_too_much will never be more than seventy years
we can cast the time lapse to an long and perform a normal
32 bit divison operation instead.
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8835
Reviewed-on: https://review.whamcloud.com/23814
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wang di [Sun, 29 Jan 2017 00:05:25 +0000 (19:05 -0500)]
staging: lustre: lmv: remove nlink check in lmv_revalidate_slaves
If an application attempts to remove millions of files in a
single directory it will fail. This failure was tracked down to
the nlink < 2 check in lmv_revalidate_slaves, because after
nlink reaches to maximum value of LDISKFS_LINK_MAX (65000),
the nlink broadcast back from the server will be reported as
one. The return value of 1 is not invalid so lets remove
the check.
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6984
Reviewed-on: http://review.whamcloud.com/16490
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Jian Yu <jian.yu@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yang Sheng [Sun, 29 Jan 2017 00:05:24 +0000 (19:05 -0500)]
staging: lustre: llite: don't invoke direct_IO for the EOF case
The function generic_file_read_iter() does not check EOF
before invoke direct_IO callback. So we have to check it
ourselves.
Signed-off-by: Yang Sheng <yang.sheng@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8969
Reviewed-on: https://review.whamcloud.com/24552
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Simmons [Sun, 29 Jan 2017 00:05:23 +0000 (19:05 -0500)]
staging: lustre: obd: move s3 in lmd_parse to inner loop
Building the lustre client with W=1 reports the following
error:
obdclass/obd_mount.c: In function lmd_parse:
obdclass/obd_mount.c:880: warning: variable set but not used
The solution is to move s3 to the inner loop
where it is only used.
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8378
Reviewed-on: https://review.whamcloud.com/23820
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steve Guminski [Sun, 29 Jan 2017 00:05:22 +0000 (19:05 -0500)]
staging: lustre: fid: Change positional struct initializers to C99
This patch makes no functional changes. Struct initializers in the
fid directory that use C89 or GCC-only syntax are updated to C99
syntax.
The C99 syntax prevents incorrect initialization if values are
accidently placed in the wrong position, allows changes in the struct
definition, and clears any members that are not given an explicit
value.
The following struct initializers have been updated:
lustre/fid/fid_lib.c:
const struct lu_seq_range LUSTRE_SEQ_SPACE_RANGE
const struct lu_seq_range LUSTRE_SEQ_ZERO_RANGE
lustre/fid/lproc_fid.c:
struct lprocfs_vars seq_client_debugfs_list
Signed-off-by: Steve Guminski <stephenx.guminski@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6210
Reviewed-on: https://review.whamcloud.com/23789
Reviewed-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Niu Yawei [Sun, 29 Jan 2017 00:05:21 +0000 (19:05 -0500)]
staging: lustre: ptlrpc: update replay cursor when close during replay
The replay cursor should be updated properly when close happened
during replay, otherwise, ptlrpc_replay_next() could run into a
dead loop due to an invalid replay cursor:
- replay cursor is moved to an open request during replay;
- application close that open file, so the rq_replay of the open
request is cleared;
- ptlrpc_replay_next() calls ptlrpc_free_committed() to free
committed/closed requests, the open request is removed from
the committed list, so the replay cursor is changed to an
empty list_head now. The open request won't be freed now since
it's still held by the pending close request;
- ptlrpc_replay_next() continue to move the replay cursor to
next and run into a dead loop at the end;
Another change in this patch is to remove the out of date comments
in ptlrpc_replay_next() and cover the whole process of finding
replay request within imp_lock, because:
1. With two separated replay lists and replay cursor introduced,
finding replay request won't take much time as before, it's
not necessary to do this "lock -> unlock -> lock -> unlock"
trick anymore;
2. Nowadays there are various kind of non-replay requests are
allowed during recovery, so ptlrpc_free_committed() may run in
parallel to remove an open request while ptlrpc_replay_next()
is iterating the open requests list;
Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8765
Reviewed-on: https://review.whamcloud.com/23418
Reviewed-by: Yang Sheng <yang.sheng@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Eremin [Sun, 29 Jan 2017 00:05:19 +0000 (19:05 -0500)]
staging: lustre: ptlrpc: update MODULE_PARAM_DESC in ptlrpcd.c
Update max_ptlrpcds module parameter descriptions to let
users know its obsolete. Change cpt to CPT for the module
parameter description ptlrpcd_per_cpt_max so it matches
documentation.
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8890
Reviewed-on: https://review.whamcloud.com/24065
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Eremin [Sun, 29 Jan 2017 00:05:18 +0000 (19:05 -0500)]
staging: lustre: ptlrpc: remove unused pc->pc_env
Environment for request interpreters is not used any more.
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8887
Reviewed-on: https://review.whamcloud.com/24061
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Simmons [Sun, 29 Jan 2017 00:05:17 +0000 (19:05 -0500)]
staging: lustre: socklnd: remove socklnd_init_msg
Remove the inline function socklnd_init_msg.
Its only used by the kernel code so no point
keeping it in an UAPI header.
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/18506
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liang Zhen [Sun, 29 Jan 2017 00:05:16 +0000 (19:05 -0500)]
staging: lustre: ksocklnd: ignore timedout TX on closing connection
ksocklnd reaper thread always tries to close the connection for the
first timedout zero-copy TX. This is wrong if this connection is
already being closed, because the reaper will see the same TX again
and again and cannot find out other timedout zero-copy TXs and close
connections for them.
Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8867
Reviewed-on: https://review.whamcloud.com/23973
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Sun, 29 Jan 2017 00:05:15 +0000 (19:05 -0500)]
staging: lustre: mdc: avoid returning freed request
In mdc_close() if ptlrpc_request_pack() fails then set req to NULL so
that an already freed request is not returned in *request.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8811
Reviewed-on: https://review.whamcloud.com/23843
Reviewed-by: Patrick Farrell <paf@cray.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patrick Farrell [Sun, 29 Jan 2017 00:05:14 +0000 (19:05 -0500)]
staging: lustre: mdc: Make IT_OPEN take lookup bits lock
An earlier commit accidentally changed handling of IT_OPEN,
making it take the MDS_INODELOCK_UPDATE bits lock instead of
MDS_INODELOCK_LOOKUP. This does not cause any known bugs.
Signed-off-by: Patrick Farrell <paf@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8842
Reviewed-on: https://review.whamcloud.com/23797
Fixes:
70a251f68dea ("staging: lustre: obd: decruft md_enqueue() and md_intent_lock()"
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steve Guminski [Sun, 29 Jan 2017 00:05:13 +0000 (19:05 -0500)]
staging: lustre: libcfs: Change positional struct initializers to C99
This patch makes no functional changes. Struct initializers in the
libcfs directory that use C89 or GCC-only syntax are updated to C99
syntax.
The C99 syntax prevents incorrect initialization if values are
accidently placed in the wrong position, allows changes in the struct
definition, and clears any members that are not given an explicit
value.
The following struct initializers have been updated:
libcfs/include/libcfs/libcfs_crypto.h:
static struct cfs_crypto_hash_type hash_types[]
Signed-off-by: Steve Guminski <stephenx.guminski@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6210
Reviewed-on: https://review.whamcloud.com/23332
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Eremin [Sun, 29 Jan 2017 00:05:12 +0000 (19:05 -0500)]
staging: lustre: libcfs: fix error messages
Don't treat unability to set CPU partition affinity as error.
Improve those warning messages.
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8703
Reviewed-on: https://review.whamcloud.com/23307
Reviewed-by: Patrick Farrell <paf@cray.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Sun, 29 Jan 2017 00:05:11 +0000 (19:05 -0500)]
staging: lustre: obd: remove OBD_NOTIFY_CREATE
None of the obd_notify() handlers listen for the OBD_NOTIFY_CREATE
event, so remove it and its sole use in lov_add_target().
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8403
Reviewed-on: https://review.whamcloud.com/21420
Reviewed-by: Ben Evans <bevans@cray.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vladimir Saveliev [Sun, 29 Jan 2017 00:05:10 +0000 (19:05 -0500)]
staging: lustre: ptlrpc: allow blocking asts to be delayed
ptlrpc_import_delay_req() refuses to delay blocking asts when import
is not in LUSTRE_IMP_FULL yet. That leads to client eviction assuming
that it failed to respond.
Allow delays for blocking asts being resent.
Signed-off-by: Vladimir Saveliev <vladimir.saveliev@seagate.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8351
Seagate-bug-id: MRP-3500
Reviewed-on: https://review.whamcloud.com/21065
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steve Guminski [Sun, 29 Jan 2017 00:05:09 +0000 (19:05 -0500)]
staging: lustre: osc: osc_match_base prototype differs from declaration
The patch updates the prototype in osc_internal.h to match the
enums used in the declaration.
The osc_match_base declaration in lustre/osc/osc_request.c uses
enums for stricter checking on the type and mode parameters:
int osc_match_base(struct obd_export *exp,
...
--> enum ldlm_type type,
union ldlm_policy_data *policy,
--> enum ldlm_mode mode,
... int unref)
The prototype in lustre/osc/osc_internal.h instead used unsigned ints:
int osc_match_base(struct obd_export *exp,
...
--> __u32 type,
union ldlm_policy_data *policy,
--> __u32 mode,
... int unref);
Signed-off-by: Steve Guminski <stephenx.guminski@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8189
Reviewed-on: http://review.whamcloud.com/23167
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Niu Yawei [Sun, 29 Jan 2017 00:05:08 +0000 (19:05 -0500)]
staging: ptlrpc: leaked rs on difficult reply
reply_out_callback() should call ptlrpc_schedule_difficult_reply()
to finalize the rs if it's already not on uncommitted list, otherwise,
the rs and the export held by rs could be leaked:
- target_send_reply() sends a difficult reply before the transaction
committed, the reply is linked to scp_rep_active;
- export gets disconnected by umount or whatever reason,
server_disconnect_export() is called to complete all outstanding
replies, which will calls into ptlrpc_handle_rs() to dispose of
the rs, so the rs is removed from the uncommitted list and
LNetMDUnlink() is called to unlink the reply buffer and generate
an unlink event;
- reply_out_callback() is called to process above unlink event,
ptlrpc_schedule_difficult_reply() is supposed to be called to
dispose of the rs finally. However, it could be skipped because of
following flawed code snippet:
if (!rs->rs_no_ack ||
rs->rs_transno <= rs->rs_export->exp_obd->obd_last_committed)
ptlrpc_schedule_difficult_reply(rs);
The intention of above code is: if rs_no_ack is true (COS enabled),
and transaction is not committed, we should rely on commit callback
to release the rs. However, it overlooked the situation that rs
could have been removed from the uncommitted list by disconnecting
export.
Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7903
Reviewed-on: http://review.whamcloud.com/22696
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Simmons [Sun, 29 Jan 2017 00:05:07 +0000 (19:05 -0500)]
staging: libcfs: remove integer types abstraction from libcfs
Replace the ulong_ptr_t and long_ptr_t with standard
kernel types.
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6245
Reviewed-on: http://review.whamcloud.com/20204
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rahul Deshmukh [Sun, 29 Jan 2017 00:05:06 +0000 (19:05 -0500)]
staging: lustre: llite: Adding timed wait in ll_umount_begin
There exists timing race between umount and other
thread which will increment the reference count on
mnt e.g. getattr. If umount thread lose the race
then umount fails with EBUSY error. To avoid this
timed wait is added so that umount thread will wait
for user to decrement the mnt reference count.
Signed-off-by: Rahul Deshmukh <rahul.deshmukh@seagate.com>
Signed-off-by: Lokesh Nagappa Jaliminche <lokesh.jaliminche@seagate.com>
Signed-off-by: Jian Yu <jian.yu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1882
Seagate-bug-id: MRP-1192
Reviewed-on: http://review.whamcloud.com/20061
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bobi Jam [Sun, 29 Jan 2017 00:05:05 +0000 (19:05 -0500)]
staging: lustre: llite: specify READA debug mask for ras_update
So that debug log only contains relevant messages for debugging
purpose.
Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8413
Reviewed-on: http://review.whamcloud.com/22753
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Simmons [Sun, 29 Jan 2017 00:05:04 +0000 (19:05 -0500)]
staging: lustre: header: remove assert from interval_set()
In the case of interval_tree.h only interval_set()
uses LASSERT which is removed in this patch and
interval_set() instead reports a real error. The
header libcfs.h for interval_tree.h is not needed
anymore so we can just use the standard linux
kernel headers instead.h
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6401
Reviewed-on: https://review.whamcloud.com/22522
Reviewed-on: https://review.whamcloud.com/24323
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bobi Jam [Sun, 29 Jan 2017 00:05:03 +0000 (19:05 -0500)]
staging: lustre: lov: ld_target could be NULL
lov_device::ld_target[ost_idx] could be NULL if the OST target is
not filled in lov_device::ld_lov::lov_tgt_desc[ost_idx] yet.
Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8018
Reviewed-on: http://review.whamcloud.com/21411
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Eremin [Sun, 29 Jan 2017 00:05:02 +0000 (19:05 -0500)]
staging: lustre: libcfs: default CPT matches NUMA topology
Change default value of CPT pattern and make it match NUMA topology
Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5050
Reviewed-on: http://review.whamcloud.com/22377
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Eremin [Sun, 29 Jan 2017 00:05:01 +0000 (19:05 -0500)]
staging: lustre: libcfs: avoid stomping on module param cpu_pattern
The function cfs_cpt_table_create_pattern() alters the string
passed to it. Currently we are passing in the module parameter
string cpu_pattern which is incorrect. Instead lets duplicate
the module parameter string and pass that to the function
cfs_cpt_table_create_pattern().
Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5050
Reviewed-on: http://review.whamcloud.com/22377
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jinshan Xiong [Sun, 29 Jan 2017 00:05:00 +0000 (19:05 -0500)]
staging: lustre: osc: limits the number of chunks in write RPC
OSC has to make sure that it won't issue write RPCs with too many
chunks otherwise it will casue ZFS to create transactions much
bigger than DMU_MAX_ACCESS in size, which will end up with write
failure.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8135
Reviewed-on: http://review.whamcloud.com/22369
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8632
Reviewed-on: http://review.whamcloud.com/22654
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Patrick Farrell <paf@cray.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Niu Yawei [Sun, 29 Jan 2017 00:04:59 +0000 (19:04 -0500)]
staging: lustre: clio: sync write should update mtime
Sync write should update m/ctime promptly, otherwise, stale m/ctime
could be updated on the OST object by the sync write RPC.
Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7310
Reviewed-on: http://review.whamcloud.com/21063
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fan Yong [Sun, 29 Jan 2017 00:04:58 +0000 (19:04 -0500)]
staging: lustre: ptlrpc: comment for FLD_QUERY RPC reply swab
The 'fld_read_server' uses 'RMF_GENERIC_DATA' to hold the 'FLD_QUERY'
RPC reply that is composed of 'struct lu_seq_range_array'. But there
is not registered swabber function for 'RMF_GENERIC_DATA'. So the RPC
peers need to handle the RPC reply with fixed little-endian format.
In theory, we can define new structure with some swabber registered
to handle the 'FLD_QUERY' RPC reply result automatically. But from
the implementation view, it is not easy to be done within current
'struct req_msg_field' framework. Because the sequence range array
in the RPC reply is not fixed length, instead, its length depends
on 'lu_seq_range' count, that is unknown when prepare the RPC buffer.
Generally, for such flexible length RPC usage, there will be a field
in the RPC layout to indicate the data length. But for the 'FLD_READ'
RPC, we have no way to do that unless we add new length filed that
will broken the on-wire RPC protocol and cause interoperability
trouble with old peer.
Signed-off-by: Fan Yong <fan.yong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6284
Reviewed-on: http://review.whamcloud.com/22309
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Eremin [Sun, 29 Jan 2017 00:04:57 +0000 (19:04 -0500)]
staging: lustre: llite: Setting xattr are properly checked with and without ACLs
Setting extended attributes permissions are properly checked with and
without ACLs. In user.* namespace, only regular files and directories
can have extended attributes. For sticky directories, only the owner
and privileged user can write attributes.
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1482
Reviewed-on: http://review.whamcloud.com/21496
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andriy Skulysh [Sun, 29 Jan 2017 00:04:56 +0000 (19:04 -0500)]
staging: lustre: ldlm: ASSERTION(flock->blocking_export!=0) failed
Whole policy structure was zeroed twice. Once during enqueue
and second time during resend or replay. Policy structure
should be initialized with default values only in ldlm_lock_new().
Signed-off-by: Andriy Skulysh <andriy.skulysh@seagate.com>
Signed-off-by: Ben Evans <bevans@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8349
Seagate-bug-id: MRP-2536, MRP-2909
Reviewed-on: http://review.whamcloud.com/21061
Reviewed-by: Alexander Boyko <alexander.boyko@seagate.com>
Reviewed-by: Vitaly Fertman <vitaly.fertman@seagate.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fan Yong [Sun, 29 Jan 2017 00:04:55 +0000 (19:04 -0500)]
staging: lustre: mgc: handle config_llog_data::cld_refcount properly
Originally, the logic of handling config_llog_data::cld_refcount
is some confusing, it may cause the cld_refcount to be leaked or
trigger "LASSERT(atomic_read(&cld->cld_refcount) > 0);" when put
the reference. This patch clean related logic as following:
1) When the 'cld' is created, its reference is set as 1.
2) No need additional reference when add the 'cld' into the list
'config_llog_list'.
3) Inrease 'cld_refcount' when set lock data after mgc_enqueue()
done successfully by mgc_process_log().
4) When mgc_requeue_thread() traversals the 'config_llog_list',
it needs to take additional reference on each 'cld' to avoid
being freed during subsequent processing. The reference also
prevents the 'cld' to be dropped from the 'config_llog_list',
then the mgc_requeue_thread() can safely locate next 'cld',
and then decrease the 'cld_refcount' for previous one.
5) mgc_blocking_ast() will drop the reference of 'cld_refcount'
that is taken in mgc_process_log().
6) The others need to call config_log_find() to find the 'cld'
if want to access related config log data. That will increase
the 'cld_refcount' to avoid being freed during accessing. The
sponsor needs to call config_log_put() after using the 'cld'.
7) Other confused or redundant logic are dropped.
On the other hand, the patch also enhances the protection for
'config_llog_data' flags, such as 'cld_stopping'/'cld_lostlock'
as following.
a) Use 'config_list_lock' (spinlock) to handle the possible
parallel accessing of these flags among mgc_requeue_thread()
and others config llog data visitors, such as mount/umount,
blocking_ast, and so on.
b) Use 'config_llog_data::cld_lock' (mutex) to pretect other
parallel accessing of these flags among kinds of blockable
operations, such as mount, umount, and blocking ast.
The 'config_llog_data::cld_lock' is also used for protecting
the sub-cld members, such as 'cld_sptlrpc'/'cld_params', and
so on.
Signed-off-by: Fan Yong <fan.yong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8408
Reviewed-on: http://review.whamcloud.com/21616
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Hongchao Zhang <hongchao.zhang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / linux-2.6-microblaze.git / log