drm/i915/gem: Allow backends to override pread implementation

As there are more and more complicated interactions between the different
backing stores and userspace, push the control into the backends rather
than accumulate them all inside the ioctl handlers.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105154934.16022-1-chris@chris-wilson.co.uk

drm/i915/gem: Perform all asynchronous waits prior to marking payload start

The initial breadcrumb marks the transition from context wait and setup
into the request payload. We use the marker to determine if the request
is merely waiting to begin, or is inside the payload and hung.
Forgetting to include a breadcrumb before the user payload would mean we
do not reset the guilty user request, and conversely if the initial
breadcrumb is too early we blame the user for a problem elsewhere.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201007090947.19950-1-chris@chris-wilson.co.uk

drm/i915: Hold onto an explicit ref to i915_vma_work.pinned

Since __vma_release is run by a kworker after the fence has been
signaled, it is no longer protected by the active reference on the vma,
and so the alias of vw->pinned to vma->obj is also not protected by a
reference on the object. Add an explicit reference for vw->pinned so it
will always be safe.

Found by inspection.

Fixes: 54d7195f8c64 ("drm/i915: Unpin vma->obj on early error")
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.6+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201102161931.30031-1-chris@chris-wilson.co.uk

drm/i915/gt: Flush xcs before tgl breadcrumbs

In a simple test case that writes to scratch and then busy-waits for the
batch to be signaled, we observe that the signal is before the write is
posted. That is bad news.

Splitting the flush + write_dword into two separate flush_dw prevents
the issue from being reproduced, we can presume the post-sync op is not
so post-sync.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/216
Testcase: igt/gem_exec_fence/parallel
Testcase: igt/i915_selftest/live/gt_timelines
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: stable@vger.kernel.org
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201102221057.29626-2-chris@chris-wilson.co.uk

drm/i915/gt: Expose more parameters for emitting writes into the ring

Add another lower level to emit_ggtt_write so that the GGTT nature of
the write is not hardcoded into the emitter.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201102221057.29626-1-chris@chris-wilson.co.uk

drm/i915/guc: Clear pointers on free

Clear out some pointers when objects have been de-allocated. This
makes it much easier to track down use-after-free type issues.

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028145826.2949180-4-John.C.Harrison@Intel.com

drm/i915/guc: Improved reporting when GuC fails to load

Rather than just saying 'GuC failed to load: -110', actually print out
the GuC status register and break it down into the individual fields.

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028145826.2949180-3-John.C.Harrison@Intel.com

drm/i915/guc: Update to use firmware v49.0.1

The latest GuC firmware includes a number of interface changes that
require driver updates to match.

* Starting from Gen11, the ID to be provided to GuC needs to contain
  the engine class in bits [0..2] and the instance in bits [3..6].

  NOTE: this patch breaks pointer dereferences in some existing GuC
  functions that use the guc_id to dereference arrays but these functions
  are not used for now as we have GuC submission disabled and we will
  update these functions in follow up patch which requires new IDs.

* The new GuC requires the additional data structure (ADS) and associated
  'private_data' pointer to be setup. This is basically a scratch area
  of memory that the GuC owns. The size is read from the CSS header.

* There is now a physical to logical engine mapping table in the ADS
  which needs to be configured in order for the firmware to load. For
  now, the table is initialised with a 1 to 1 mapping.

* GUC_CTL_CTXINFO has been removed from the initialization params.

* reg_state_buffer is maintained internally by the GuC as part of
  the private data.

* The ADS layout has changed significantly. This patch updates the
  shared structure and also adds better documentation of the layout.

* While i915 does not use GuC doorbells, the firmware now requires
  that some initialisation is done.

* The number of engine classes and instances supported in the ADS has
  been increased.

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028145826.2949180-2-John.C.Harrison@Intel.com

drm/i915/gem: Avoid synchronous binds deep within locks

On bxt, we require a VT'd w/a to serialise all GGTT updates with memory
transfers, and use stop_machine() for this purpose. stop_machine() is a
global serialisation barrier and so dangerous to use from within
critical sections, as the stop_machine() will wait for all cpus to enter
the stop_machine callback, and those cpus may be waiting for the
critical section already held.

Fixes: d7085b0faac8 ("drm/i915/gem: Poison stolen pages before use")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201027184759.29888-1-chris@chris-wilson.co.uk

drm/i915/selftests: Exercise intel_timeline_read_hwsp()

intel_timeline_read_hwsp() is used to support semaphore waits between
engines, that may themselves be deferred for arbitrary periods -- that
is the read of the target request's HWSP is at an indeterminant point in
the future. To support this, we need to prevent overwriting a HWSP that
is being watched across a seqno wrap (otherwise the next request will
write its value into the old HWSP preventing the watcher from making
progress, ad infinitum.) To simulate the observer across a wrap, let's
create a request that reads from the HWSP and dispatch it at different
points around a wrap to see if the value is lost.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201021220411.5777-2-chris@chris-wilson.co.uk

drm/i915/gt: Use the local HWSP offset during submission

We wrap the timeline on construction of the next request, but there may
still be requests in flight that have not yet finalized the breadcrumb.
(The breadcrumb is delayed as we need engine-local offsets, and for the
virtual engine that is not known until execution.) As such, by the time
we write to the timeline's HWSP offset it may have changed, and we
should use the value we preserved in the request instead.

Though the window is small and infrequent (at full flow we can expect a
timeline's seqno to wrap once every 30 minutes), the impact of writing
the old seqno into the new HWSP is severe: the old requests are never
completed, and the new requests are completed before they are even
submitted.

Fixes: ebece7539242 ("drm/i915: Keep timeline HWSP allocated until idle across the system")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201022064127.10159-1-chris@chris-wilson.co.uk

drm/i915/selftests: Skip RPS tests on Ironlake (only IPS)

Since Ironlake uses intel_ips.ko for its dynamic frequency adjustment,
we do not have direct control over the frequency management so such
tests are defunct. Similarly, we can't check the gen6+ RPS registers on
Ironlake.

Hopefully this catches all the invalid tests now that Ironlake has
rejoined the dynamic GPU frequency club. There is an opportunity for the
reader to add tests to exercise MEMINTRSTS and co.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201022210814.23004-1-chris@chris-wilson.co.uk

drm/i915/pmu: Fix CPU hotplug with multiple GPUs

Since we keep a driver global mask of online CPUs and base the decision
whether PMU needs to be migrated upon it, we need to make sure the
migration is done for all registered PMUs (so GPUs).

To do this we need to track the current CPU for each PMU and base the
decision on whether to migrate on a comparison between global and local
state.

At the same time, since dynamic CPU hotplug notification slots are a
scarce resource and given how we already register the multi instance type
state, we can and should add multiple instance of the i915 PMU to this
same state and not allocate a new one for every GPU.

v2:
 * Use pr_notice. (Chris)

v3:
 * Handle a nasty interaction where unregistration which triggers a false
   CPU offline event. (Chris)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Daniel Vetter <daniel.vetter@intel.com> # dynamic slot optimisation
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201020161144.678668-1-tvrtko.ursulin@linux.intel.com

drm/i915/pmu: Handle PCI unbind

Mark the device as closed and keep references to driver data alive to
allow for safe driver unbind with active PMU clients. Perf core does not
otherwise handle this case so we have to do it manually like this.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201020100822.543332-1-tvrtko.ursulin@linux.intel.com

drm/i915/gem: Flush coherency domains on first set-domain-ioctl

Avoid skipping what appears to be a no-op set-domain-ioctl if the cache
coherency state is inconsistent with our target domain. This also has
the utility of using the population of the pages to validate the backing
store.

The danger in skipping the first set-domain is leaving the cache
inconsistent and submitting stale data, or worse leaving the clean data
in the cache and not flushing it to the GPU. The impact should be small
as it requires a no-op set-domain as the very first ioctl in a
particular sequence not found in typical userspace.

Reported-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Fixes: 754a25442705 ("drm/i915: Skip object locking around a no-op set-domain ioctl")
Testcase: igt/gem_mmap_offset/blt-coherency
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201019203825.10966-1-chris@chris-wilson.co.uk

drm/i915/region: fix max size calculation

We are incorrectly limiting the max allocation size as per the mm
max_order, which is effectively the largest power-of-two that we can fit
in the region size. However, it's normal to setup the region or
allocator with a non-power-of-two size(for example 3G), which we should
already handle correctly, except it seems for the early too-big-check.

v2: make sure we also exercise the I915_BO_ALLOC_CONTIGUOUS path, which
is quite different, since for that we are actually limited by the
largest power-of-two that we can fit within the region size. (Chris)

Fixes: b908be543e44 ("drm/i915: support creating LMEM objects")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: CQ Tang <cq.tang@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201021103606.241395-1-matthew.auld@intel.com

drm/i915/selftests: Flush the old heartbeat more gently

In order to test how fast the heartbeat can respond, we measure with the
interval set to its minimum. Before we measure though, we want to be
sure we start with a fresh pulse, and so wait until any old one is
complete. During that wait though, we were continually flushing the
work, and so continually re-evaluating to see if the pulse was complete,
and each attempt would count as an unresponsive system. If the engine
did not complete the request in the couple of busy-spins, it would flag
an error. This is unfortunate, so let's not busy-spin waiting for the
old heartbeat, but terminate it and start afresh.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201019142841.32273-1-chris@chris-wilson.co.uk

drm/i915: Exclude low pages (128KiB) of stolen from use

The GPU is trashing the low pages of its reserved memory upon reset. If
we are using this memory for ringbuffers, then we will dutiful resubmit
the trashed rings after the reset causing further resets, and worse. We
must exclude this range from our own use. The value of 128KiB was found
by empirical measurement (and verified now with a selftest) on gen9.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201019165005.18128-2-chris@chris-wilson.co.uk

drm/i915/gem: Poison stolen pages before use

When allocating objects from stolen, memset() the backing store to
POISON_INUSE (0x5a) to help identify any uninitialised use of a stolen
object.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201019165005.18128-1-chris@chris-wilson.co.uk

drm/i915/gt: Onion unwind for scratch page allocation failure

In switching to using objects for our ppGTT scratch pages, care was not
taken to avoid trying to unref NULL objects on failure. And for gen6
ppGTT, it appears we forgot entirely to unwind after a partial allocation
failure.

Fixes: 89351925a477 ("drm/i915/gt: Switch to object allocations for page directories")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201019083444.1286-1-chris@chris-wilson.co.uk

drm/i915: Use the active reference on the vma while capturing

During error capture, we need to take a reference to the vma from before
the reset in order to catpure the contents of the vma later. Currently
we are using both an active reference and a kref, but due to nature of
the i915_vma reference handling, that kref is on the vma->obj and not
the vma itself. This means the vma may be destroyed as soon as it is
idle, that is in between the i915_active_release(&vma->active) and the
i915_vma_put(vma):

<3> [197.866181] BUG: KASAN: use-after-free in intel_engine_coredump_add_vma+0x36c/0x4a0 [i915]
<3> [197.866339] Read of size 8 at addr ffff8881258cb800 by task gem_exec_captur/1041
<3> [197.866467]
<4> [197.866512] CPU: 2 PID: 1041 Comm: gem_exec_captur Not tainted 5.9.0-g5e4234f97efba-kasan_200+ #1
<4> [197.866521] Hardware name: Intel Corp. Broxton P/Apollolake RVP1A, BIOS APLKRVPA.X64.0150.B11.1608081044 08/08/2016
<4> [197.866530] Call Trace:
<4> [197.866549]  dump_stack+0x99/0xd0
<4> [197.866760]  ? intel_engine_coredump_add_vma+0x36c/0x4a0 [i915]
<4> [197.866783]  print_address_description.constprop.8+0x3e/0x60
<4> [197.866797]  ? kmsg_dump_rewind_nolock+0xd4/0xd4
<4> [197.866819]  ? lockdep_hardirqs_off+0xd4/0x120
<4> [197.867037]  ? intel_engine_coredump_add_vma+0x36c/0x4a0 [i915]
<4> [197.867249]  ? intel_engine_coredump_add_vma+0x36c/0x4a0 [i915]
<4> [197.867270]  kasan_report.cold.10+0x1f/0x37
<4> [197.867492]  ? intel_engine_coredump_add_vma+0x36c/0x4a0 [i915]
<4> [197.867710]  intel_engine_coredump_add_vma+0x36c/0x4a0 [i915]
<4> [197.867949]  i915_gpu_coredump.part.29+0x150/0x7b0 [i915]
<4> [197.868186]  i915_capture_error_state+0x5e/0xc0 [i915]
<4> [197.868396]  intel_gt_handle_error+0x6eb/0xa20 [i915]
<4> [197.868624]  ? intel_gt_reset_global+0x370/0x370 [i915]
<4> [197.868644]  ? check_flags+0x50/0x50
<4> [197.868662]  ? __lock_acquire+0xd59/0x6b00
<4> [197.868678]  ? register_lock_class+0x1ad0/0x1ad0
<4> [197.868944]  i915_wedged_set+0xcf/0x1b0 [i915]
<4> [197.869147]  ? i915_wedged_get+0x90/0x90 [i915]
<4> [197.869371]  ? i915_wedged_get+0x90/0x90 [i915]
<4> [197.869398]  simple_attr_write+0x153/0x1c0
<4> [197.869428]  full_proxy_write+0xee/0x180
<4> [197.869442]  ? __sb_start_write+0x1f3/0x310
<4> [197.869465]  vfs_write+0x1a3/0x640
<4> [197.869492]  ksys_write+0xec/0x1c0
<4> [197.869507]  ? __ia32_sys_read+0xa0/0xa0
<4> [197.869525]  ? lockdep_hardirqs_on_prepare+0x32b/0x4e0
<4> [197.869541]  ? syscall_enter_from_user_mode+0x1c/0x50
<4> [197.869566]  do_syscall_64+0x33/0x80
<4> [197.869579]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
<4> [197.869590] RIP: 0033:0x7fd8b7aee281
<4> [197.869604] Code: c3 0f 1f 84 00 00 00 00 00 48 8b 05 59 8d 20 00 c3 0f 1f 84 00 00 00 00 00 8b 05 8a d1 20 00 85 c0 75 16 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 57 f3 c3 0f 1f 44 00 00 41 54 55 49 89 d4 53
<4> [197.869613] RSP: 002b:00007ffea3b72008 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
<4> [197.869625] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fd8b7aee281
<4> [197.869633] RDX: 0000000000000002 RSI: 00007fd8b81a82e7 RDI: 000000000000000d
<4> [197.869641] RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000034
<4> [197.869650] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fd8b81a82e7
<4> [197.869658] R13: 000000000000000d R14: 0000000000000000 R15: 0000000000000000
<3> [197.869707]
<3> [197.869757] Allocated by task 1041:
<4> [197.869833]  kasan_save_stack+0x19/0x40
<4> [197.869843]  __kasan_kmalloc.constprop.5+0xc1/0xd0
<4> [197.869853]  kmem_cache_alloc+0x106/0x8e0
<4> [197.870059]  i915_vma_instance+0x212/0x1930 [i915]
<4> [197.870270]  eb_lookup_vmas+0xe06/0x1d10 [i915]
<4> [197.870475]  i915_gem_do_execbuffer+0x131d/0x4080 [i915]
<4> [197.870682]  i915_gem_execbuffer2_ioctl+0x103/0x5d0 [i915]
<4> [197.870701]  drm_ioctl_kernel+0x1d2/0x270
<4> [197.870710]  drm_ioctl+0x40d/0x85c
<4> [197.870721]  __x64_sys_ioctl+0x10d/0x170
<4> [197.870731]  do_syscall_64+0x33/0x80
<4> [197.870740]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
<3> [197.870748]
<3> [197.870798] Freed by task 22:
<4> [197.870865]  kasan_save_stack+0x19/0x40
<4> [197.870875]  kasan_set_track+0x1c/0x30
<4> [197.870884]  kasan_set_free_info+0x1b/0x30
<4> [197.870894]  __kasan_slab_free+0x111/0x160
<4> [197.870903]  kmem_cache_free+0xcd/0x710
<4> [197.871109]  i915_vma_parked+0x618/0x800 [i915]
<4> [197.871307]  __gt_park+0xdb/0x1e0 [i915]
<4> [197.871501]  ____intel_wakeref_put_last+0xb1/0x190 [i915]
<4> [197.871516]  process_one_work+0x8dc/0x15d0
<4> [197.871525]  worker_thread+0x82/0xb30
<4> [197.871535]  kthread+0x36d/0x440
<4> [197.871545]  ret_from_fork+0x22/0x30
<3> [197.871553]
<3> [197.871602] The buggy address belongs to the object at ffff8881258cb740
 which belongs to the cache i915_vma of size 968

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2553
Fixes: 2850748ef876 ("drm/i915: Pull i915_vma_pin under the vm->mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201016092527.29039-1-chris@chris-wilson.co.uk

drm/i915/gt: Confirm the context survives execution

Repeat our sanitychecks from before execution to after execution. One
expects that if we were to see these, the gpu would already be on fire,
but the timing may be informative.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201015190816.31763-1-chris@chris-wilson.co.uk

drm/i915/gt: Cleanup kasan warning for on-stack (unsigned long) casting

Kasan is gving a warning for passing a u32 parameter into find_first_bit
(casting to a unsigned long *, with appropriate length restrictions):

[   44.678262] BUG: KASAN: stack-out-of-bounds in find_first_bit+0x2e/0x50
[   44.678295] Read of size 8 at addr ffff888233f4fc30 by task core_hotunplug/474
[   44.678326]
[   44.678358] CPU: 0 PID: 474 Comm: core_hotunplug Not tainted 5.9.0+ #608
[   44.678465] Hardware name: BESSTAR (HK) LIMITED GN41/Default string, BIOS BLT-BI-MINIPC-F4G-EX3R110-GA65A-101-D 10/12/2018
[   44.678500] Call Trace:
[   44.678534]  dump_stack+0x84/0xba
[   44.678569]  print_address_description.constprop.0+0x21/0x220
[   44.678605]  ? kmsg_dump_rewind_nolock+0x5f/0x5f
[   44.678638]  ? _raw_spin_lock_irqsave+0x6d/0xb0
[   44.678669]  ? _raw_write_lock_irqsave+0xb0/0xb0
[   44.678702]  ? set_task_cpu+0x1e0/0x1e0
[   44.678733]  ? find_first_bit+0x2e/0x50
[   44.678763]  kasan_report.cold+0x20/0x42
[   44.678794]  ? find_first_bit+0x2e/0x50
[   44.678825]  __asan_load8+0x69/0x90
[   44.678856]  find_first_bit+0x2e/0x50
[   44.679027]  __caps_show.isra.0+0x9e/0x1f0 [i915]

Since we are only using the shorter type for our own convenience,
accommodate kasan and use unsigned long.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201013110845.16127-1-chris@chris-wilson.co.uk

drm/i915/gt: Undo forced context restores after trivial preemptions

We may try to preempt the currently executing request, only to find that
after unravelling all the dependencies that the original executing
context is still the earliest in the topological sort and re-submitted
back to HW (if we do detect some change in the ELSP that requires
re-submission). However, due to the way we check for wrap-around during
the unravelling, we mark any context that has been submitted just once
(i.e. with the rq->wa_tail set, but the ring->tail earlier) as
potentially wrapping and requiring a forced restore on resubmission.
This was expected to be not a problem, as it was anticipated that most
unwinding for preemption would result in a context switch and the few
that did not would be lost in the noise. It did not take long for
someone to find one particular workload where the cost of those extra
context restores was measurable.

However, since we know the wa_tail is of fixed size, and we know that a
request must be larger than the wa_tail itself, we can safely maintain
the check for request wrapping and check against a slightly future point
in the ring that includes an expected wa_tail. (That is if the
ring->tail is already set to rq->wa_tail, including another 8 bytes in
the check does not invalidate the incremental wrap detection.)

Fixes: 8ab3a3812aa9 ("drm/i915/gt: Incrementally check for rewinding")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Bruce Chang <yu.bruce.chang@intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.4+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201002083425.4605-1-chris@chris-wilson.co.uk

drm/i915/gt: Delay execlist processing for tgl

When running gem_exec_nop, it floods the system with many requests (with
the goal of userspace submitting faster than the HW can process a single
empty batch). This causes the driver to continually resubmit new
requests onto the end of an active context, a flood of lite-restore
preemptions. If we time this just right, Tigerlake hangs.

Inserting a small delay between the processing of CS events and
submitting the next context, prevents the hang. Naturally it does not
occur with debugging enabled. The suspicion then is that this is related
to the issues with the CS event buffer, and inserting an mmio read of
the CS pointer status appears to be very successful in preventing the
hang. Other registers, or uncached reads, or plain mb, do not prevent
the hang, suggesting that register is key -- but that the hang can be
prevented by a simple udelay, suggests it is just a timing issue like
that encountered by commit 233c1ae3c83f ("drm/i915/gt: Wait for CSB
entries on Tigerlake"). Also note that the hang is not prevented by
applying CTX_DESC_FORCE_RESTORE, or by inserting a delay on the GPU
between requests.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Bruce Chang <yu.bruce.chang@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201015195023.32346-1-chris@chris-wilson.co.uk

drm/i915/gem: Support parsing of oversize batches

Matthew Auld noted that on more recent systems (such as the parser for
gen9) we may have objects that are larger than expected by the GEM uAPI
(i.e. greater than u32). These objects would have incorrect implicit
batch lengths, causing the parser to reject them for being incomplete,
or worse.

Based on a patch by Matthew Auld.

Reported-by: Matthew Auld <matthew.auld@intel.com>
Fixes: 435e8fc059db ("drm/i915: Allow parsing of unsized batches")
Testcase: igt/gem_exec_params/larger-than-life-batch
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20201015115954.871-1-chris@chris-wilson.co.uk

drm/i915/gt: Fixup tgl mocs for PTE tracking

Forcing mocs:1 [used for our winsys follows-pte mode] to be cached
caused display glitches. Though it is documented as deprecated (and so
likely behaves as uncached) use the follow-pte bit and force it out of
L3 cache.

Fixes: 4d8a5cfe3b13 ("drm/i915/gt: Initialize reserved and unspecified MOCS indices")
Testcase: igt/kms_frontbuffer_tracking
Testcase: igt/kms_big_fb
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ayaz A Siddiqui <ayaz.siddiqui@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201015122138.30161-4-chris@chris-wilson.co.uk

drm/i915: Enable eLLC caching of display buffers for SKL+

Since SKL the eLLC has been sitting on the far side of the system
agent, meaning the display engine can utilize it. Let's enable that.

I chose WB for the caching mode, because my numbers are indicating
that WT might actually be WB and WC might actually be UC. I'm not
100% sure that is indeed the case but at least my simple rendercopy
based benchmark didn't see any difference in performance.

Also if I configure things to do LLCeLLC+WT I still get cache dirt
on my screen, suggesting that is in fact operating in WB mode
anyway. This is also the reason I had to fix the MOCS target cache
to really say PTE rather than LLC+eLLC.
Since SKL the eLLC has been sitting on the far side of the system agent,
meaning the display engine can utilize it. Let's enable that.

Eero's earlier benchmarks numbers:
"* Results in GfxBench and Unigine (Valley/Heaven) tests were within daily
   variation on the tested SKL machines

 * SKL GT4e (128MB eLLC) / Wayland / Weston:
   +15-20% SynMark TexMem512 (512MB of textures)
   +4-6% SynMark TerrainFly*, CSCloth, ShMapVsm
   -5-10% SynMark TexMem128 (128MB of textures)

 * SKL GT3e (64MB eLLC) / Xorg / Unity:
   +4-8% GpuTest Triangle fullscreen (FullHD)
   -5-10% GpuTest Triangle windowed (1/2 screen)

 * SKL GT2 (no eLLC) / Xorg / Unity:
   * Some of the higher FPS SynMark pixel and vertex shader tests
     are few percent higher, more than daily variance
   => Do you see any reason why this machine would be impacted
      although it doesn't eLLC?"

Caveats:
- Still haven't tested with a prime setup
- Still not entirely sure this a good idea, but I've been
  using it on my cfl anyway :)

v2: Split the MOCS PTE change out

Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201007120329.17076-3-ville.syrjala@linux.intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20201015122138.30161-3-chris@chris-wilson.co.uk

drm/i915: Fix MOCS PTE setting for gen9+

Fix up the MOCS PTE setting to really get the LLC cacheability
from the PTE rather than hardocoding it to LLC or LLC+eLLC.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201007120329.17076-2-ville.syrjala@linux.intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20201015122138.30161-2-chris@chris-wilson.co.uk

drm/i915: Mark ininitial fb obj as WT on eLLC machines to avoid rcu lockup during fbdev init

Currently we leave the cache_level of the initial fb obj
set to NONE. This means on eLLC machines the first pin_to_display()
will try to switch it to WT which requires a vma unbind+bind.
If that happens during the fbdev initialization rcu does not
seem operational which causes the unbind to get stuck. To
most appearances this looks like a dead machine on boot.

Avoid the unbind by already marking the object cache_level
as WT when creating it. We still do an excplicit ggtt pin
which will rewrite the PTEs anyway, so they will match whatever
cache level we set.

Cc: <stable@vger.kernel.org> # v5.7+
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2381
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201007120329.17076-1-ville.syrjala@linux.intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20201015122138.30161-1-chris@chris-wilson.co.uk

drm/i915/gt: Initialize reserved and unspecified MOCS indices

In order to avoid functional breakage of mis-programmed applications that
have grown to depend on unused MOCS entries, we are programming
those entries to be equal to fully cached ("L3 + LLC") entry.

These reserved and unspecified entries should not be used as they may be
changed to less performant variants with better coherency in the future
if more entries are needed.

v2: As suggested by Lucas De Marchi to utilise __init_mocs_table for
programming default value, setting I915_MOCS_PTE index of tgl_mocs_table
with desired value.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Francisco Jerez <currojerez@riseup.net>
Cc: Mathew Alwin <alwin.mathew@intel.com>
Cc: Mcguire Russell W <russell.w.mcguire@intel.com>
Cc: Spruit Neil R <neil.r.spruit@intel.com>
Cc: Zhou Cheng <cheng.zhou@intel.com>
Cc: Benemelis Mike G <mike.g.benemelis@intel.com>
Signed-off-by: Ayaz A Siddiqui <ayaz.siddiqui@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200729102539.134731-2-ayaz.siddiqui@intel.com
Cc: stable@vger.kernel.org

drm/i915/gt: Track the most recent pulse for the heartbeat

Since we track the idle_pulse for flushing the barriers and avoid
re-emitting the pulse upon idling if no futher action is required, this
also impacts the heartbeat. Before emitting a fresh heartbeat, we look
at the engine idle status and assume that if the pulse was the last
request emitted along the heartbeat, the engine is idling and a
heartbeat pulse not required. This assumption fails, but we can reuse
the idle pulse as the heartbeat if we are yet to emit one, and so track
the status of that pulse for our engine health check.

This impacts tgl/rcs0 as we rely on the heartbeat for our healthcheck for
the normal preemption detection mechanism is disabled by default.

Testcase: igt/gem_exec_schedule/preempt-hang/rcs0 #tgl
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201006094653.7558-1-chris@chris-wilson.co.uk

drm/i915: Fix DMA mapped scatterlist lookup

As the previous patch fixed the places where we walk the whole scatterlist
for DMA addresses, this patch fixes the random lookup functionality.

To achieve this we have to add a second lookup iterator and add a
i915_gem_object_get_sg_dma helper, to be used analoguous to existing
i915_gem_object_get_sg_dma. Therefore two lookup caches are maintained per
object and they are flushed at the same point for simplicity. (Strictly
speaking the DMA cache should be flushed from i915_gem_gtt_finish_pages,
but today this conincides with unsetting of the pages in general.)

Partial VMA view is then fixed to use the new DMA lookup and properly
query sg length.

v2:
 * Checkpatch.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Tom Murphy <murphyt7@tcd.ie>
Cc: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201006092508.1064287-2-tvrtko.ursulin@linux.intel.com

drm/i915: Fix DMA mapped scatterlist walks

When walking DMA mapped scatterlists sg_dma_len has to be used since it
can be different (coalesced) from the backing store entry.

This also means we have to end the walk when encountering a zero length
DMA entry and cannot rely on the normal sg list end marker.

Both issues were there in theory for some time but were hidden by the fact
Intel IOMMU driver was never coalescing entries. As there are ongoing
efforts to change this we need to start handling it.

v2:
 * Use unsigned int for local storing sg_dma_len. (Logan)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
References: 85d1225ec066 ("drm/i915: Introduce & use new lightweight SGL iterators")
References: b31144c0daa8 ("drm/i915: Micro-optimise gen6_ppgtt_insert_entries()")
Reported-by: Tom Murphy <murphyt7@tcd.ie>
Suggested-by: Tom Murphy <murphyt7@tcd.ie> # __sgt_iter
Suggested-by: Logan Gunthorpe <logang@deltatee.com> # __sgt_iter
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201006092508.1064287-1-tvrtko.ursulin@linux.intel.com

drm/i915/gt: Scrub HW state on remove

Currently we do a final scrub of the HW state upon release. However,
when rebinding the device, this is too late as the device may either
have been partially rebound or the device is no longer accessible. If
the device has been removed before release, the reset goes astray
leaving the device in an inconsistent state, unlikely to work without a
full PCI reset. Furthermore, if the device is partially rebound before
the HW scrubbing, there may be leftover HW state that should have been
scrubbed. Either way, we need to push the scrubbing earlier before the
removal, so into unregister. The danger is that on older machines,
resetting the GPU also impact the display engine and so the reset should
be after modesetting is disabled (and before reuse we need to recover
modesetting).

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2508
Testcase: igt/core_hotunplug
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200929112639.24223-1-chris@chris-wilson.co.uk

drm/i915: Skip over MI_NOOP when parsing

Though less likely in practice, igt uses MI_NOOP frequently to pad out
its batch buffers. The lookup and valiation of so many MI_NOOP command
descriptions is noticeable, though the side-effect of poisoning the
last-validated-command cache is more likely to impact upon real CS.

Testcase: igt/gen9_exec_parse/bb-large
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201001102632.18789-1-chris@chris-wilson.co.uk

drm/i915/gt: Retire cancelled requests on unload

If we manage to hit the intel_gt_set_wedged_on_fini() while active, i.e.
module unload during a stress test, we may cancel the requests but not
clean up. This leads to a very slow module unload as we wait for
something or other to trigger the retirement flushing, or timeout and
unload with a bunch of warnings. Instead if we explicitly cancel then
cleanup on an active unload, it should be instant and quiet.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200930163253.2789-3-chris@chris-wilson.co.uk

drm/i915/selftests: Finish pending mock requests on cancellation.

Flush all the pending requests from the mock engine when they are
cancelled.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200930163253.2789-2-chris@chris-wilson.co.uk

drm/i915/gt: Signal cancelled requests

After marking the requests on an engine as cancelled upon wedging, send
any signals for their completions.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200930163253.2789-1-chris@chris-wilson.co.uk

drm/i915: Avoid mixing integer types during batch copies

Be consistent and use unsigned long throughout the chunk copies to
avoid the inherent clumsiness of mixing integer types of different
widths and signs. Failing to take acount of a wider unsigned type when
using min_t can lead to treating it as a negative, only for it flip back
to a large unsigned value after passing a boundary check.

Fixes: ed13033f0287 ("drm/i915/cmdparser: Only cache the dst vmap")
Testcase: igt/gen9_exec_parse/bb-large
Reported-by: "Candelaria, Jared" <jared.candelaria@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: "Candelaria, Jared" <jared.candelaria@intel.com>
Cc: "Bloomfield, Jon" <jon.bloomfield@intel.com>
Cc: <stable@vger.kernel.org> # v4.9+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200928215942.31917-1-chris@chris-wilson.co.uk

drm/i915/gem: Always test execution status on closing the context

Verify that if a context is active at the time it is closed, that it is
either persistent and preemptible (with hangcheck running) or it shall
be removed from execution.

Fixes: 9a40bddd47ca ("drm/i915/gt: Expose heartbeat interval via sysfs")
Testcase: igt/gem_ctx_persistence/heartbeat-close
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.7+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200928221510.26044-3-chris@chris-wilson.co.uk

drm/i915/gt: Always send a pulse down the engine after disabling heartbeat

Currently, we check we can send a pulse prior to disabling the
heartbeat to verify that we can change the heartbeat, but since we may
re-evaluate execution upon changing the heartbeat interval we need another
pulse afterwards to refresh execution.

v2: Tvrtko asked if we could reduce the double pulse to a single, which
opened up a discussion of how we should handle the pulse-error after
attempting to change the property, and the desire to serialise
adjustment of the property with its validating pulse, and unwind upon
failure.

Fixes: 9a40bddd47ca ("drm/i915/gt: Expose heartbeat interval via sysfs")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.7+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200928221510.26044-2-chris@chris-wilson.co.uk

drm/i915: Cancel outstanding work after disabling heartbeats on an engine

We only allow persistent requests to remain on the GPU past the closure
of their containing context (and process) so long as they are continuously
checked for hangs or allow other requests to preempt them, as we need to
ensure forward progress of the system. If we allow persistent contexts
to remain on the system after the the hangcheck mechanism is disabled,
the system may grind to a halt. On disabling the mechanism, we sent a
pulse along the engine to remove all executing contexts from the engine
which would check for hung contexts -- but we did not prevent those
contexts from being resubmitted if they survived the final hangcheck.

Fixes: 9a40bddd47ca ("drm/i915/gt: Expose heartbeat interval via sysfs")
Testcase: igt/gem_ctx_persistence/heartbeat-stop
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.7+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200928221510.26044-1-chris@chris-wilson.co.uk

drm/i915/gem: Hold request reference for canceling an active context

We have to be very careful while walking the timeline->requests list
under the RCU guard, as the requests (and so rq->link) use
SLAB_TYPESAFE_BY_RCU and so the requests may be reallocated within an
rcu grace period. As the requests are reallocated, they are removed from
one list and placed on another, and if we are iterating over that
request at that moment, the list iteration jumps from one list to the
next and promptly gets confused. Verify we hold the request reference
to ensure that the request is not added to a new list behind our backs.

<4> [582.745252] general protection fault, probably for non-canonical address 0xcccccccccccccd5c: 0000 [#1] PREEMPT SMP PTI
<4> [582.745297] CPU: 0 PID: 1475 Comm: gem_ctx_persist Not tainted 5.9.0-rc1-CI-CI_DRM_8908+ #1
<4> [582.745304] Hardware name: Intel Corporation NUC7CJYH/NUC7JYB, BIOS JYGLKCPX.86A.0027.2018.0125.1347 01/25/2018
<4> [582.745317] RIP: 0010:__lock_acquire+0x2c3/0x1f40
<4> [582.745323] Code: 00 65 8b 05 c7 8a ef 7e 85 c0 0f 85 b4 07 00 00 44 8b 9d c4 08 00 00 45 85 db 0f 84 0f 01 00 00 ba 05 00 00 00 e9 c8 06 00 00 <48> 81 3f c0 89 c7 82 b8 00 00 00 00 41 0f 45 c0 83 fe 01 41 89 c3
<4> [582.745334] RSP: 0018:ffffc9000461bc40 EFLAGS: 00010002
<4> [582.745340] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
<4> [582.745345] RDX: 0000000000000000 RSI: 0000000000000000 RDI: cccccccccccccd5c
<4> [582.745350] RBP: ffff8881ec4a2880 R08: 0000000000000001 R09: 0000000000000001
<4> [582.745356] R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000
<4> [582.745361] R13: 0000000000000000 R14: 0000000000000000 R15: cccccccccccccd5c
<4> [582.745367] FS:  00007fb44da78e40(0000) GS:ffff888278000000(0000) knlGS:0000000000000000
<4> [582.745373] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [582.745378] CR2: 00007fb44daad040 CR3: 0000000268428000 CR4: 0000000000350ef0
<4> [582.745383] Call Trace:
<4> [582.745390]  ? __lock_acquire+0x913/0x1f40
<4> [582.745397]  lock_acquire+0xb5/0x3c0
<4> [582.745526]  ? kill_engines+0x19a/0x4b0 [i915]
<4> [582.745533]  ? find_held_lock+0x2d/0x90
<4> [582.745541]  _raw_spin_lock_irq+0x30/0x40
<4> [582.745635]  ? kill_engines+0x19a/0x4b0 [i915]
<4> [582.745727]  kill_engines+0x19a/0x4b0 [i915]
<4> [582.745820]  context_close+0x195/0x410 [i915]
<4> [582.745912]  i915_gem_context_close+0x5b/0x160 [i915]
<4> [582.745994]  i915_driver_postclose+0x14/0x40 [i915]
<4> [582.746003]  drm_file_free.part.13+0x240/0x290
<4> [582.746009]  drm_release_noglobal+0x16/0x50
<4> [582.746016]  __fput+0xa5/0x250
<4> [582.746021]  task_work_run+0x6e/0xb0
<4> [582.746028]  exit_to_user_mode_prepare+0x178/0x180
<4> [582.746034]  syscall_exit_to_user_mode+0x36/0x220
<4> [582.746040]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
<4> [582.746045] RIP: 0033:0x7fb44d1dc421
<4> [582.746050] Code: f7 d8 64 89 02 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 8b 05 ea cf 20 00 85 c0 75 16 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 3f f3 c3 0f 1f 44 00 00 53 89 fb 48 83 ec 10
<4> [582.746062] RSP: 002b:00007ffed2e83818 EFLAGS: 00000246 ORIG_RAX: 0000000000000003
<4> [582.746069] RAX: 0000000000000000 RBX: 0000556410bfe840 RCX: 00007fb44d1dc421
<4> [582.746075] RDX: 000000000000000a RSI: 00000000c0406469 RDI: 0000000000000008
<4> [582.746080] RBP: 0000000000000008 R08: 00007fb44d1c51cc R09: 00007fb44d1c5240
<4> [582.746086] R10: 0000000000000001 R11: 0000000000000246 R12: 00000000fffffffb
<4> [582.746091] R13: 0000000000000006 R14: 0000000000000000 R15: 000000000000000a
<4> [582.746099] Modules linked in: vgem mei_hdcp snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio btusb btrtl btbcm btintel x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul bluetooth ghash_clmulni_intel ecdh_generic ecc i915 r8169 realtek mei_me mei snd_hda_intel i2c_hid snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core snd_pcm pinctrl_geminilake pinctrl_intel prime_numbers [last unloaded: test_drm_mm]

Fixes: 736e785f9b28 ("drm/i915/gem: Reduce context termination list iteration guard to RCU")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200925101107.27869-2-chris@chris-wilson.co.uk

drm/i915: Redo "Remove i915_request.lock requirement for execution callbacks"

The reordering and rebasing of commit 2e4c6c1a9db5 ("drm/i915: Remove
i915_request.lock requirement for execution callbacks") caused it to
revert an earlier correction. Let us restore commit 99f0a640d464
("drm/i915: Remove requirement for holding i915_request.lock for
breadcrumbs")

Fixes: 2e4c6c1a9db5 ("drm/i915: Remove i915_request.lock requirement for execution callbacks")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200925101107.27869-1-chris@chris-wilson.co.uk

drm/i915/gem: Serialise debugfs i915_gem_objects with ctx->mutex

Since the debugfs may peek into the GEM contexts as the corresponding
client/fd is being closed, we may try and follow a dangling pointer.
However, the context closure itself is serialised with the ctx->mutex,
so if we hold that mutex as we inspect the state coupled in the context,
we know the pointers within the context are stable and will remain valid
as we inspect their tables.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: CQ Tang <cq.tang@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200723172119.17649-3-chris@chris-wilson.co.uk

drm/i915/uc: tune down GuC communication enabled/disabled messages

The GuC communication enabled/disabled messages are too noisy in info
level. Convert them from info to debug level, and switch to device based
logging while at it.

Reported-by: Karol Herbst <kherbst@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917165056.29766-1-jani.nikula@intel.com

drm/i915: check i915_vm_alloc_pt_stash for errors

If we are really unlucky and encounter an error during
i915_vm_alloc_pt_stash, we end up passing an empty pt/pd stash all the
way down into the low-level ppgtt alloc code, leading to explosions,
since it expects at least the required number of pt/pd for the va range.

[  211.981418] BUG: kernel NULL pointer dereference, address: 0000000000000000
[  211.981421] #PF: supervisor read access in kernel mode
[  211.981422] #PF: error_code(0x0000) - not-present page
[  211.981424] PGD 80000008439cb067 P4D 80000008439cb067 PUD 84a37f067 PMD 0
[  211.981427] Oops: 0000 [#1] SMP PTI
[  211.981428] CPU: 1 PID: 1301 Comm: i915_selftest Tainted: G     U    I       5.9.0-rc5+ #3
[  211.981430] Hardware name:  /NUC6i7KYB, BIOS KYSKLi70.86A.0050.2017.0831.1924 08/31/2017
[  211.981521] RIP: 0010:__gen8_ppgtt_alloc+0x1ed/0x3c0 [i915]
[  211.981523] Code: c1 48 c7 c7 5d 5d fe c0 65 ff 0d ee 1d 03 3f e8 d9 91 1f e2 8b 55 c4 31 c0 48 8b 75 b8 85 d2 0f 95 c0 48 8b 1c c6 48 89 45 98 <48> 8b 03 48 8b 90 58 02 00 00 48 85 d2 0f 84 07 ea 15 00 48 81 fa
[  211.981526] RSP: 0018:ffffba2cc0eb3970 EFLAGS: 00010202
[  211.981527] RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000004
[  211.981529] RDX: 0000000000000002 RSI: ffff9be998bdb8c0 RDI: ffff9be99c844300
[  211.981530] RBP: ffffba2cc0eb39d8 R08: 0000000000000640 R09: ffff9be97cdfd000
[  211.981531] R10: ffff9be97cdfd614 R11: 0000000000000000 R12: 0000000000000000
[  211.981532] R13: ffff9be98607ba20 R14: ffff9be995a0b400 R15: ffffba2cc0eb39e8
[  211.981534] FS:  00007f0f10b31000(0000) GS:ffff9be99fc40000(0000) knlGS:0000000000000000
[  211.981536] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  211.981538] CR2: 0000000000000000 CR3: 000000084d74e006 CR4: 00000000003706e0
[  211.981539] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  211.981541] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  211.981542] Call Trace:
[  211.981609]  gen8_ppgtt_alloc+0x79/0x90 [i915]
[  211.981678]  ppgtt_bind_vma+0x36/0x80 [i915]
[  211.981756]  __vma_bind+0x39/0x40 [i915]
[  211.981818]  fence_work+0x21/0x98 [i915]
[  211.981879]  fence_notify+0x8d/0x128 [i915]
[  211.981939]  __i915_sw_fence_complete+0x62/0x240 [i915]
[  211.982018]  i915_vma_pin_ww+0x1ee/0x9c0 [i915]

Fixes: cd0452aa2a0d ("drm/i915: Preallocate stashes for vma page-directories")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200921160844.73186-1-matthew.auld@intel.com

drm/i915: Fix uninitialised variable in intel_context_create_request.

In case backoff fails with an error, we return an undefined rq,
assign err to rq correctly.

Fixes: 8a929c9eb1c2 ("drm/i915: Use ww pinning for intel_context_create_request()")
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918111208.1392128-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/gt: Remove defunct intel_virtual_engine_get_sibling()

As the last user was eliminated in commit e21fecdcde40 ("drm/i915/gt:
Distinguish the virtual breadcrumbs from the irq breadcrumbs"), we can
remove the function. One less implementation detail creeping beyond its
scope.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826132811.17577-16-chris@chris-wilson.co.uk

drm/i915: Reduce GPU error capture mutex hold time

Shrink the hold time for the error capture mutex to just around the
acquire/release of the PTE used for reading back the object via the
Global GTT. For platforms that do not need the GGTT read back, we can
skip the mutex entirely and allow concurrent error capture. Where we do
use the GGTT, by restricting the hold time around the slow readback and
compression, we are more resilient against softlockups (khungtaskd) as
the heartbeat may well also trigger an error while the first is on
going, and this allows the heartbeat reset to skip past the capture and
not be stalled.

Testcase: igt/gem_exec_capture/many-*
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916090059.3189-3-chris@chris-wilson.co.uk

drm/i915: Break up error capture compression loops with cond_resched()

As the error capture will compress user buffers as directed to by the
user, it can take an arbitrary amount of time and space. Break up the
compression loops with a call to cond_resched(), that will allow other
processes to schedule (avoiding the soft lockups) and also serve as a
warning should we try to make this loop atomic in the future.

Testcase: igt/gem_exec_capture/many-*
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916090059.3189-2-chris@chris-wilson.co.uk

drm/i915/gt: Show engine properties in the pretty printer

When debugging the engine state, include the user properties that may,
or may not, have been adjusted by the user/test.

For example,
vecs0
...
Properties:
heartbeat_interval_ms: 2500 [default 2500]
max_busywait_duration_ns: 8000 [default 8000]
preempt_timeout_ms: 640 [default 640]
stop_timeout_ms: 100 [default 100]
timeslice_duration_ms: 1 [default 1]

Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916090059.3189-1-chris@chris-wilson.co.uk

drm/i915: Fix an error code i915_gem_object_copy_blt()

This code should use "vma[1]" instead of "vma".  The "vma" variable is a
valid pointer.

Fixes: 6b05030496f7 ("drm/i915: Convert i915_gem_object/client_blt.c to use ww locking as well, v2.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200911075243.GG12635@kadam

drm/i915/gt: Use a mmio read of the CSB in case of failure

If we find the GPU didn't update the CSB within 50us, we currently fail
and eventually reset the GPU. Lets report the value from the mmio space
as a last resort, it may just stave off an unnecessary GPU reset.

References: HSDES#22011327657
Suggested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915134923.30088-4-chris@chris-wilson.co.uk

drm/i915/gt: Apply the CSB w/a for all

Since we expect to inline the csb_parse() routines, the w/a for the
stale CSB data on Tigerlake will be pulled into process_csb(), and so we
might as well simply reuse the logic for all, and so will hopefully
avoid any strange behaviour on Icelake that was not covered by our
previous w/a.

References: d8f505311717 ("drm/i915/icl: Forcibly evict stale csb entries")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Bruce Chang <yu.bruce.chang@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915134923.30088-3-chris@chris-wilson.co.uk

drm/i915/gt: Wait for CSB entries on Tigerlake

On Tigerlake, we are seeing a repeat of commit d8f505311717 ("drm/i915/icl:
Forcibly evict stale csb entries") where, presumably, due to a missing
Global Observation Point synchronisation, the write pointer of the CSB
ringbuffer is updated _prior_ to the contents of the ringbuffer. That is
we see the GPU report more context-switch entries for us to parse, but
those entries have not been written, leading us to process stale events,
and eventually report a hung GPU.

However, this effect appears to be much more severe than we previously
saw on Icelake (though it might be best if we try the same approach
there as well and measure), and Bruce suggested the good idea of resetting
the CSB entry after use so that we can detect when it has been updated by
the GPU. By instrumenting how long that may be, we can set a reliable
upper bound for how long we should wait for:

    513 late, avg of 61 retries (590 ns), max of 1061 retries (10099 ns)

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2045
References: d8f505311717 ("drm/i915/icl: Forcibly evict stale csb entries")
References: HSDES#22011327657, HSDES#1508287568
Suggested-by: Bruce Chang <yu.bruce.chang@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Bruce Chang <yu.bruce.chang@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: stable@vger.kernel.org # v5.4
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915134923.30088-2-chris@chris-wilson.co.uk

drm/i915/gt: Widen CSB pointer to u64 for the parsers

A CSB entry is 64b, and it is simpler for us to treat it as an array of
64b entries than as an array of pairs of 32b entries.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915134923.30088-1-chris@chris-wilson.co.uk

drm/i915/gt: Check for a registered driver with IPS

If the ips module calls into the driver during an unbind/bind cycle, we
may see the driver while it has unregistered itself from ips and try and
dereference a NULL ips_mchdev pointer.

<1> [211.928844] BUG: kernel NULL pointer dereference, address: 0000000000000014
<1> [211.928861] #PF: supervisor read access in kernel mode
<1> [211.928871] #PF: error_code(0x0000) - not-present page
<6> [211.928881] PGD 0 P4D 0
<4> [211.928890] Oops: 0000 [#1] PREEMPT SMP PTI
<4> [211.928900] CPU: 3 PID: 327 Comm: ips-monitor Not tainted 5.9.0-rc5-CI-CI_DRM_9008+ #1
<4> [211.928914] Hardware name: Hewlett-Packard HP EliteBook 8440p/172A, BIOS 68CCU Ver. F.24 09/13/2013
<4> [211.929056] RIP: 0010:mchdev_get+0x5a/0x180 [i915]
<4> [211.929067] Code: c0 5a 74 0d 80 3d f1 53 29 00 00 0f 84 ab 00 00 00 48 8b 1d c8 a8 29 00 e8 d3 18 89 e1 85 c0 74 09 80 3d d1 53 29 00 00 74 65 <8b> 4b 14 48 8d 7b 14 85 c9 0f 84 09 01 00 00 8d 51 01 89 c8 f0 0f
<4> [211.929095] RSP: 0018:ffffc900002efe60 EFLAGS: 00010202
<4> [211.929105] RAX: 0000000000000001 RBX: 0000000000000000 RCX: ffff8881297acf40
<4> [211.929118] RDX: 0000000000000000 RSI: ffffffff8264e2c0 RDI: ffff8881297ad820
<4> [211.929130] RBP: ffffc900002efe68 R08: ffff8881297ad820 R09: 00000000fffffffe
<4> [211.929143] R10: ffff8881297acf40 R11: 00000000fff74c96 R12: ffff8881294dfa18
<4> [211.929155] R13: 0000000000000067 R14: ffff888126eff640 R15: ffff888126efe840
<4> [211.929168] FS:  0000000000000000(0000) GS:ffff888133d80000(0000) knlGS:0000000000000000
<4> [211.929182] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [211.929194] CR2: 0000000000000014 CR3: 0000000002610000 CR4: 00000000000006e0
<4> [211.929206] Call Trace:
<4> [211.929294]  i915_read_mch_val+0x15/0x380 [i915]
<4> [211.929309]  ? ips_monitor+0x3fb/0x630 [intel_ips]
<4> [211.929321]  ips_monitor+0x53c/0x630 [intel_ips]
<4> [211.929334]  ? ips_gpu_lower+0x30/0x30 [intel_ips]
<4> [211.929348]  kthread+0x14d/0x170
<4> [211.929358]  ? kthread_park+0x80/0x80
<4> [211.929369]  ret_from_fork+0x22/0x30
<4> [211.929382] Modules linked in: vgem snd_hda_codec_hdmi snd_hda_codec_generic ledtrig_audio i915 coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core e1000e snd_pcm mei_me mei intel_ips lpc_ich ptp prime_numbers pps_core
<4> [211.929437] CR2: 0000000000000014

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915105113.26564-1-chris@chris-wilson.co.uk

drm/i915/gt: Clear the buffer pool age before use

If we create a new node, it is possible for the slab allocator to return
us a recently freed node. If that node was just retired, it will retain
the current jiffy as its node->age. There is then a miniscule window,
where as that node is retired, it will appear on the free list with an
incorrect age and be eligible for reuse by one thread, and then by a
second thread as the correct node->age is written.

Fixes: 06b73c2d0b65 ("drm/i915/gt: Delay taking the spinlock for grabbing from the buffer pool")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915091417.4086-3-chris@chris-wilson.co.uk

drm/i915/gem: Prevent using pgprot_writecombine() if PAT is not supported

Let's not try and use PAT attributes for I915_MAP_WC if the CPU doesn't
support PAT.

Fixes: 6056e50033d9 ("drm/i915/gem: Support discontiguous lmem object maps")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v5.6+
Link: https://patchwork.freedesktop.org/patch/msgid/20200915091417.4086-2-chris@chris-wilson.co.uk

drm/i915/gem: Avoid implicit vmap for highmem on x86-32

On 32b, highmem using a finite set of indirect PTE (i.e. vmap) to provide
virtual mappings of the high pages.  As these are finite, map_new_virtual()
must wait for some other kmap() to finish when it runs out. If we map a
large number of objects, there is no method for it to tell us to release
the mappings, and we deadlock.

However, if we make an explicit vmap of the page, that uses a larger
vmalloc arena, and also has the ability to tell us to release unwanted
mappings. Most importantly, it will fail and propagate an error instead
of waiting forever.

Fixes: fb8621d3bee8 ("drm/i915: Avoid allocating a vmap arena for a single page") #x86-32
References: e87666b52f00 ("drm/i915/shrinker: Hook up vmap allocation failure notifier")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v4.7+
Link: https://patchwork.freedesktop.org/patch/msgid/20200915091417.4086-1-chris@chris-wilson.co.uk

drm/i915: Unlock the shared hwsp_gtt object after pinning

The hwsp_gtt object is used for sub-allocation and could therefore
be shared by many contexts causing unnecessary contention during
concurrent context pinning.
However since we're currently locking it only for pinning, it remains
resident until we unpin it, and therefore it's safe to drop the
lock early, allowing for concurrent thread access.

Signed-off-by: Thomas Hellström <thomas.hellstrom@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Filter wake_flags passed to default_wake_function

(NOTE: This is the minimal backportable fix, a full fix is being
developed at https://patchwork.freedesktop.org/patch/388048/)

The flags passed to the wait_entry.func are passed onwards to
try_to_wake_up(), which has a very particular interpretation for its
wake_flags. In particular, beyond the published WF_SYNC, it has a few
internal flags as well. Since we passed the fence->error down the chain
via the flags argument, these ended up in the default_wake_function
confusing the kernel/sched.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2110
Fixes: ef4688497512 ("drm/i915: Propagate fence errors")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v5.4+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728152144.1100-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Joonas: Rebased and reordered into drm-intel-gt-next branch]
[Joonas: Added a note and link about more complete fix]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Remove i915_request.lock requirement for execution callbacks

To implement preempt-to-busy (and so efficient timeslicing and best utilization
of the hardware submission ports) we let the GPU run asynchronously in respect
to the ELSP submission queue. This created challenges in keeping and accessing
the driver state mirroring the asynchronous GPU execution.

Previous fix 1d9221e9d395 ("drm/i915: Skip signaling a signaled request")
however did not correctly serialize request retirement with the execution
callbacks.

We were using the i915_request.lock to serialise adding an execution callback
with __i915_request_submit. However, if we use an atomic llist_add to serialise
multiple waiters and then check to see if the request is already executing, we
can remove the irq-spinlock and fix serialization between retirement and
execution callbacks in one go.

v2: Avoid using the irq_work when outside of the irq-spinlocks, where we
can execute the callbacks immediately.
v3: Pay close attention to the order of setting ACTIVE on retirement, we
need to ensure the request is signaled and breadcrumbs detached before
we finish removing the request from the engine.
v4: Expanded commit message.

Fixes: 1d9221e9d395 ("drm/i915: Skip signaling a signaled request")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716142207.13003-2-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Joonas: Rebased and reordered into drm-intel-gt-next branch]
[Joonas: Added expanded commit message from Tvrtko and Chris]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Be wary of data races when reading the active execlists

To implement preempt-to-busy (and so efficient timeslicing and best utilization
of the hardware submission ports) we let the GPU run asynchronously in respect
to the ELSP submission queue. This created challenges in keeping and accessing
the driver state mirroring the asynchronous GPU execution.

The latest occurence of this was spotted by KCSAN:

[ 1413.563200] BUG: KCSAN: data-race in __await_execution+0x217/0x370 [i915]
[ 1413.563221]
[ 1413.563236] race at unknown origin, with read to 0xffff88885bb6c478 of 8 bytes by task 9654 on cpu 1:
[ 1413.563548]  __await_execution+0x217/0x370 [i915]
[ 1413.563891]  i915_request_await_dma_fence+0x4eb/0x6a0 [i915]
[ 1413.564235]  i915_request_await_object+0x421/0x490 [i915]
[ 1413.564577]  i915_gem_do_execbuffer+0x29b7/0x3c40 [i915]
[ 1413.564967]  i915_gem_execbuffer2_ioctl+0x22f/0x5c0 [i915]
[ 1413.564998]  drm_ioctl_kernel+0x156/0x1b0
[ 1413.565022]  drm_ioctl+0x2ff/0x480
[ 1413.565046]  __x64_sys_ioctl+0x87/0xd0
[ 1413.565069]  do_syscall_64+0x4d/0x80
[ 1413.565094]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

To complicate matters, we have to both avoid the read tearing of *active and
avoid any write tearing as perform the pending[] -> inflight[] promotion of the
execlists.

This is because we cannot rely on the memcpy doing u64 aligned copies on all
kernels/platforms and so we opt to open-code it with explicit WRITE_ONCE
annotations to satisfy KCSAN.

v2: When in doubt, write the same comment again.
v3: Expanded commit message.

Fixes: b55230e5e800 ("drm/i915: Check for awaits on still currently executing requests")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716142207.13003-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Joonas: Rebased and reordered into drm-intel-gt-next branch]
[Joonas: Added expanded commit message from Tvrtko and Chris]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Add ww locking to pin_to_display_plane, v2.

Use ww locking for pin_to_display_plane for all the pinning and locking.
With the locking removed from set_cache_level, we need to fix
i915_gem_set_caching_ioctl to take the object reservation lock.

As this is a single lock, we don't need to use the ww dance.

Changes since v1:
- Do not use ww locking in i915_gem_set_caching_ioctl (Thomas).

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-24-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Add ww locking to vm_fault_gtt

We want to start requiring the reservation_lock instead of obj->mm.lock
for pinning objects, take the ww lock inside vm_fault_gtt as a first step
towards the legacy lock removal.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-23-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Move i915_vma_lock in the selftests to avoid lock inversion, v3.

Make sure vma_lock is not used as inner lock when kernel context is used,
and add ww handling where appropriate.

Ensure that execbuf selftests keep passing by using ww handling.

Changes since v2:
- Fix i915_gem_context finally.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-22-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Use ww pinning for intel_context_create_request()

We want to get rid of intel_context_pin(), convert
intel_context_create_request() first. :)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-21-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/selftests: Fix locking inversion in lrc selftest.

This function does not use intel_context_create_request, so it has
to use the same locking order as normal code. This is required to
shut up lockdep in selftests.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-20-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Dirty hack to fix selftests locking inversion

Some i915 selftests still use i915_vma_lock() as inner lock, and
intel_context_create_request() intel_timeline->mutex as outer lock.
Fortunately for selftests this is not an issue, they should be fixed
but we can move ahead and cleanify lockdep now.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-19-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Convert i915_perf to ww locking as well

We have the ordering of timeline->mutex vs resv_lock wrong,
convert the i915_pin_vma and intel_context_pin as well to
future-proof this.

We may need to do future changes to do this more transaction-like,
and only get down to a single i915_gem_ww_ctx, but for now this
should work.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-18-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Kill last user of intel_context_create_request outside of selftests

Instead of using intel_context_create_request(), use intel_context_pin()
and i915_create_request directly.

Now all those calls are gone outside of selftests. :)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-17-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Convert i915_gem_object/client_blt.c to use ww locking as well, v2.

This is the last part outside of selftests that still don't use the
correct lock ordering of timeline->mutex vs resv_lock.

With gem fixed, there are a few places that still get locking wrong:
- gvt/scheduler.c
- i915_perf.c
- Most if not all selftests.

Changes since v1:
- Add intel_engine_pm_get/put() calls to fix use-after-free when using
  intel_engine_get_pool().

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-16-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Make sure execbuffer always passes ww state to i915_vma_pin.

As a preparation step for full object locking and wait/wound handling
during pin and object mapping, ensure that we always pass the ww context
in i915_gem_execbuffer.c to i915_vma_pin, use lockdep to ensure this
happens.

This also requires changing the order of eb_parse slightly, to ensure
we pass ww at a point where we could still handle -EDEADLK safely.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-15-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Rework intel_context pinning to do everything outside of pin_mutex

Instead of doing everything inside of pin_mutex, we move all pinning
outside. Because i915_active has its own reference counting and
pinning is also having the same issues vs mutexes, we make sure
everything is pinned first, so the pinning in i915_active only needs
to bump refcounts. This allows us to take pin refcounts correctly
all the time.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-14-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Pin engine before pinning all objects, v5.

We want to lock all gem objects, including the engine context objects,
rework the throttling to ensure that we can do this. Now we only throttle
once, but can take eb_pin_engine while acquiring objects. This means we
will have to drop the lock to wait. If we don't have to throttle we can
still take the fastpath, if not we will take the slowpath and wait for
the throttle request while unlocked.

The engine has to be pinned as first step, otherwise gpu relocations
won't work.

Changes since v1:
- Only need to get a throttled request in the fastpath, no need for
  a global flag any more.
- Always free the waited request correctly.
Changes since v2:
- Use intel_engine_pm_get()/put() to keeep engine pool alive during
  EDEADLK handling.
Changes since v3:
- Fix small rq leak.
Changes since v4:
- Use a single reloc_context, for intel_context_pin_ww().

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-13-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Nuke arguments to eb_pin_engine

Those arguments are already set as eb.file and eb.args, so kill off
the extra arguments. This will allow us to move eb_pin_engine() to
after we reserved all BO's.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-12-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Add ww context handling to context_barrier_task

This is required if we want to pass a ww context in intel_context_pin
and gen6_ppgtt_pin().

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-11-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Use ww locking in intel_renderstate.

We want to start using ww locking in intel_context_pin, for this
we need to lock multiple objects, and the single i915_gem_object_lock
is not enough.

Convert to using ww-waiting, and make sure we always pin intel_context_state,
even if we don't have a renderstate object.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-10-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Use per object locking in execbuf, v12.

Now that we changed execbuf submission slightly to allow us to do all
pinning in one place, we can now simply add ww versions on top of
struct_mutex. All we have to do is a separate path for -EDEADLK
handling, which needs to unpin all gem bo's before dropping the lock,
then starting over.

This finally allows us to do parallel submission, but because not
all of the pinning code uses the ww ctx yet, we cannot completely
drop struct_mutex yet.

Changes since v1:
- Keep struct_mutex for now. :(
Changes since v2:
- Make sure we always lock the ww context in slowpath.
Changes since v3:
- Don't call __eb_unreserve_vma in eb_move_to_gpu now; this can be
  done on normal unlock path.
- Unconditionally release vmas and context.
Changes since v4:
- Rebased on top of struct_mutex reduction.
Changes since v5:
- Remove training wheels.
Changes since v6:
- Fix accidentally broken -ENOSPC handling.
Changes since v7:
- Handle gt buffer pool better.
Changes since v8:
- Properly clear variables, to make -EDEADLK handling not BUG.
Change since v9:
- Fix unpinning fence on pnv and below.
Changes since v10:
- Make relocation gpu chaining working again.
Changes since v11:
- Remove relocation chaining, pain to make it work.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-9-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Parse command buffer earlier in eb_relocate(slow)

We want to introduce backoff logic, but we need to lock the
pool object as well for command parsing. Because of this, we
will need backoff logic for the engine pool obj, move the batch
validation up slightly to eb_lookup_vmas, and the actual command
parsing in a separate function which can get called from execbuf
relocation fast and slowpath.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-8-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Remove locking from i915_gem_object_prepare_read/write

Execbuffer submission will perform its own WW locking, and we
cannot rely on the implicit lock there.

This also makes it clear that the GVT code will get a lockdep splat when
multiple batchbuffer shadows need to be performed in the same instance,
fix that up.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-7-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Add an implementation for i915_gem_ww_ctx locking, v2.

i915_gem_ww_ctx is used to lock all gem bo's for pinning and memory
eviction. We don't use it yet, but lets start adding the definition
first.

To use it, we have to pass a non-NULL ww to gem_object_lock, and don't
unlock directly. It is done in i915_gem_ww_ctx_fini.

Changes since v1:
- Change ww_ctx and obj order in locking functions (Jonas Lahtinen)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-6-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Revert "drm/i915/gem: Split eb_vma into its own allocation"

This reverts commit 0f1dd02295f3 ("drm/i915/gem: Split eb_vma into
its own allocation") and also moves all unreserving to a single
place at the end, which is a minor simplification.

With the WW locking, we will drop all references only at the
end when unlocking, so refcounting can now be removed.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-5-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Revert "drm/i915/gem: Drop relocation slowpath".

This reverts commit 7dc8f1143778 ("drm/i915/gem: Drop relocation
slowpath"). We need the slowpath relocation for taking ww-mutex
inside the page fault handler, and we will take this mutex when
pinning all objects.

We also functionally revert ef398881d27d ("drm/i915/gem: Limit
struct_mutex to eb_reserve"), as we need the struct_mutex in
the slowpath as well, and a tiny part of 003d8b9143a6 ("drm/i915/gem:
Only call eb_lookup_vma once during execbuf ioctl"). Specifically,
we make the -EAGAIN handling part of fallback to slowpath again.

With this, we have a proper working slowpath again, which
will allow us to do fault handling with WW locks held.

[mlankhorst: Adjusted for reloc_gpu_flush() changes]

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[mlankhorst: Removed extra reloc_gpu_flush()]
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-4-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Revert relocation chaining commits.

This reverts commit 964a9b0f611ee ("drm/i915/gem: Use chained reloc batches")
and commit 0e97fbb080553 ("drm/i915/gem: Use a single chained reloc batches
for a single execbuf").

When adding ww locking to execbuf, it's hard enough to deal with a
single BO that is part of relocation execution. Chaining is hard to
get right, and with GPU relocation deprecated, it's best to drop this
altogether, instead of trying to fix something we will remove.

This is not a completely 1:1 revert, we reset rq_size to 0 in
reloc_cache_init, this was from e3d291301f99 ("drm/i915/gem: Implement legacy
MI_STORE_DATA_IMM"), because we don't want to break the selftests. (Daniel)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-3-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Revert "drm/i915/gem: Async GPU relocations only"

This reverts commit 9e0f9464e2ab ("drm/i915/gem: Async GPU relocations only"),
and related commit 7ac2d2536dfa7 ("drm/i915/gem: Delete unused code").

Async GPU relocations are not the path forward, we want to remove
GPU accelerated relocation support eventually when userspace is fixed
to use VM_BIND, and this is the first step towards that. We will keep
async gpu relocations around for now, until userspace is fixed.

Relocation support will be disabled completely on platforms where there
was never any userspace that depends on it, as the hardware doesn't
require it from at least gen9+ onward. For older platforms, the plan
is to use cpu relocations only.

The igt side is fixed in igt commit 39e9aa1032a4e ("tests/i915: Remove
subtests that rely on async relocation behavior").

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-2-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/gem: Free the fence after a fence-chain lookup failure

If dma_fence_chain_find_seqno() reports an error, it does so in its
preamble before it disposes of the input fence. On handling the
error, we need to drop the reference to the fence.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2292
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 13149e8bafc4 ("drm/i915: add syncobj timeline support")
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200806161056.17593-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/gem: Reduce context termination list iteration guard to RCU

As we now protect the timeline list using RCU, we can drop the
timeline->mutex for guarding the list iteration during context close, as
we are searching for an inflight request. Any new request will see the
context is banned and not be submitted. In doing so, pull the checks for
a concurrent submission of the request (notably the
i915_request_completed()) under the engine spinlock, to fully serialise
with __i915_request_submit()). That is in the case of preempt-to-busy
where the request may be completed during the __i915_request_submit(),
we need to be careful that we sample the request status after
serialising so that we don't miss the request the engine is actually
submitting.

Fixes: 4a3174152147 ("drm/i915/gem: Refine occupancy test in kill_context()")
References: d22d2d073ef8 ("drm/i915: Protect i915_request_await_start from early waits") # rcu protection of timeline->requests
References: https://gitlab.freedesktop.org/drm/intel/-/issues/1622
References: https://gitlab.freedesktop.org/drm/intel/-/issues/2158
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200806105954.7766-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/selftests: Prevent selecting 0 for our random width/align

When igt_random_offset() is a given a range of [0, PAGE_SIZE], it is
allowed to return 0. However, attempting to use a size of 0 for the
igt_lmem_write_cpu() byte poking, leads to call igt_random_offset() with
a range of [offset, offset + 0] and ask it to find a length of 4 within
it. This triggers the bug on that the requested length should fit within
the range!

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200806145728.16495-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/gt: Hold context/request reference while breadcrumbs are active

Currently we hold no actual reference to the request nor context while
they are attached to a breadcrumb. To avoid freeing the request/context
too early, we serialise with cancel-breadcrumbs by taking the irq
spinlock in i915_request_retire(). The alternative is to take a
reference for a new breadcrumb and release it upon signaling; removing
the more frequently hit contention point in i915_request_retire().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200801160225.6814-2-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Joonas: Rebased and reordered into drm-intel-gt-next branch]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/gt: Move intel_breadcrumbs_arm_irq earlier

Move the __intel_breadcrumbs_arm_irq earlier, next to the disarm_irq, so
that we can make use of it in the following patch.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200801160225.6814-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/gt: Shrink i915_page_directory's slab bucket

kmalloc uses power-of-two slab buckets for small allocations (up to a
few pages). Since i915_page_directory is a page of pointers, plus a
couple more, this is rounded up to 8K, and we waste nearly 50% of that
allocation. Long terms this leads to poor memory utilisation, bloating
the kernel footprint, but the problem is exacerbated by our conservative
preallocation scheme for binding VMA. As we are required to allocate all
levels for each vma just in case we need to insert them upon binding,
this leads to a large multiplication factor for a single page vma. By
halving the allocation we need for the page directory structure, we
halve the impact of that factor, bringing workloads that once fitted into
memory, hopefully back to fitting into memory.

We maintain the split between i915_page_directory and i915_page_table as
we only need half the allocation for the lowest, most populous, level.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200729164219.5737-3-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/gt: Switch to object allocations for page directories

The GEM object is grossly overweight for the practicality of tracking
large numbers of individual pages, yet it is currently our only
abstraction for tracking DMA allocations. Since those allocations need
to be reserved upfront before an operation, and that we need to break
away from simple system memory, we need to ditch using plain struct page
wrappers.

In the process, we drop the WC mapping as we ended up clflushing
everything anyway due to various issues across a wider range of
platforms. Though in a future step, we need to drop the kmap_atomic
approach which suggests we need to pre-map all the pages and keep them
mapped.

v2: Verify our large scratch page is suitably DMA aligned; and manually
clear the scratch since we are allocating plain struct pages full of
prior content.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200729164219.5737-2-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Preallocate stashes for vma page-directories

We need to make the DMA allocations used for page directories to be
performed up front so that we can include those allocations in our
memory reservation pass. The downside is that we have to assume the
worst case, even before we know the final layout, and always allocate
enough page directories for this object, even when there will be overlap.
This unfortunately can be quite expensive, especially as we have to
clear/reset the page directories and DMA pages, but it should only be
required during early phases of a workload when new objects are being
discovered, or after memory/eviction pressure when we need to rebind.
Once we reach steady state, the objects should not be moved and we no
longer need to preallocating the pages tables.

It should be noted that the lifetime for the page directories DMA is
more or less decoupled from individual fences as they will be shared
across objects across timelines.

v2: Only allocate enough PD space for the PTE we may use, we do not need
to allocate PD that will be left as scratch.
v3: Store the shift unto the first PD level to encapsulate the different
PTE counts for gen6/gen8.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200729164219.5737-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/gt: Distinguish the virtual breadcrumbs from the irq breadcrumbs

On the virtual engines, we only use the intel_breadcrumbs for tracking
signaling of stale breadcrumbs from the irq_workers. They do not have
any associated interrupt handling, active requests are passed to a
physical engine and associated breadcrumb interrupt handler. This causes
issues for us as we need to ensure that we do not actually try and
enable interrupts and the powermanagement required for them on the
virtual engine, as they will never be disabled. Instead, let's
specify the physical engine used for interrupt handler on a particular
breadcrumb.

v2: Drop b->irq_armed = true mocking for no interrupt HW

Fixes: 4fe6abb8f513 ("drm/i915/gt: Ignore irq enabling on the virtual engines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731154834.8378-4-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/gt: Only transfer the virtual context to the new engine if active

One more complication of preempt-to-busy with respect to the virtual
engine is that we may have retired the last request along the virtual
engine at the same time as preparing to submit the completed request to
a new engine. That submit will be shortcircuited, but not before we have
updated the context with the new register offsets and marked the virtual
engine as bound to the new engine (by calling swap on ve->siblings[]).
As we may have just retired the completed request, we may also be in the
middle of calling virtual_context_exit() to turn off the power management
associated with the virtual engine, and that in turn walks the
ve->siblings[]. If we happen to call swap() on the array as we walk, we
will call intel_engine_pm_put() twice on the same engine.

In this patch, we prevent this by only updating the bound engine after a
successful submission which weeds out the already completed requests.

Alternatively, we could walk a non-volatile array for the pm, such as
using the engine->mask. The small advantage to performing the update
after the submit is that we then only have to do a swap for active
requests.

Fixes: 22b7a426bbe1 ("drm/i915/execlists: Preempt-to-busy")
References: 6d06779e8672 ("drm/i915: Load balancing across a virtual engine"
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: "Nayana, Venkata Ramana" <venkata.ramana.nayana@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731154834.8378-3-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/gt: Replace intel_engine_transfer_stale_breadcrumbs

After staring at the breadcrumb enabling/cancellation and coming to the
conclusion that the cause of the mysterious stale breadcrumbs must the
act of submitting a completed requests, we can then redirect those
completed requests onto a dedicated signaled_list at the time of
construction and so eliminate intel_engine_transfer_stale_breadcrumbs().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731154834.8378-2-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>