drm/amd/display: Enable cur_rom_en even if cursor degamma is not enabled

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Set alpha enable to 0 for some specific formats

Set alpha_en to 0 in some specific color formats.

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Initialize DP ref clk with the correct clock

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.279

This version pairs with DMUB FW Release 0.0.211.0 for dcn314, dcn35, dcn351
and brings along the following:

 - Fix underflow in subvp/non-subvp configs
 - Fix compiler warnings
 - Add handling for DC power mode
 - Add extra logging for DMUB, HUBP and OTG
 - Add timing pixel encoding for mst mode validation
 - Expand supported Replay residency mode
 - Allow HPO PG and RCG for DCN35
 - Update pipe topology log to support subvp
 - Disable Z8 minimum stutter period check for DCN35
 - Enable RCO for HDMISTREAMCLK in DCN35

Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Allow RCG for Static Screen + LVP for DCN35

[Why]
We want to block IPS2 for static screen but allow it for power state
transitions.

[How]
Set DalDisableIPS=6 for DCN35 which allows:
1. RCG during static screen
2. RCG during LVP
3. IPS2 for display off / S0i3

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix compiler warnings on high compiler warning levels

[why]
Enabling higher compiler warning levels results in many issues that can
be trivially resolved as well as some potentially critical issues.

[how]
Fix all compiler warnings found with various compilers and higher
warning levels.  Primarily, potentially uninitialized variables and
unreachable code.

Reviewed-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: move build test pattern params as part of pipe resource update for odm

[why]
Move built test pattern as part of pipe resource update for odm to ensure we rebuild
test pattern params every time we have an ODM update

Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add handling for DC power mode

[Why]
Future implementations will require a distinction between AC power and
DC power (wall power and battery power, respectively). To accomplish this,
adding a power mode parameter to certain dc interfaces, and adding a
separate DML2 instance for DC mode validation. Default behaviour unchanged.

Reviewed-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove context->dml2 dependency from DML21 wrapper

[Why]
When the DML2 wrapper explicitly accesses context->dml2, that creates a
dependency on where dc saves the DML object. This dependency makes it
harder to have multiple co-existing DML objects, which we would like to
have for upcoming functionality.

[How]
 - make all DML21 interfaces take in a DML2 object as parameter
 - remove all references to context->dml2, use parameter instead

Reviewed-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add extra DMUB logging to track message timeout

[Description]
- Add logging for first DMUB inbox message that timed out to diagnostic
  data
- It is useful to track the first failed message for debug purposes
  because once DMUB becomes hung (typically on a message), it will
  remain hung and all subsequent messages. In these cases we're
  interested in knowing which is the first message that failed.

Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add root clock control function pointer to fix display corruption

[Why and how]

External display has corruption because no root clock control function. Add the function pointer to fix the issue.

Reviewed-by: Daniel Miess <daniel.miess@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Xi (Alex) Liu <xi.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Disable Z8 minimum stutter period check for DCN35

[Why]
The threshold is no longer useful for blocking suboptimal power states
for DCN35 based on real measurement.

[How]
Reduce to the minimum threshold duration, 1us.

Reviewed-by: Gabe Teeger <gabe.teeger@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add extra logging for HUBP and OTG

[Description]
Add extra logging for DCSURF_FLIP_CNTL, DCHUBP_CNTL,
OTG_MASTER_EN, and OTG_DOUBLE_BUFFER_CONTROL for more
debuggability for a system crash.

Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add OTG check for set AV mute

[Why && How]
OTG can be disabled before setting dpms on. Add check to skip wait
when setting AV mute if OTG is disabled.

Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Skip on writeback when it's not applicable

[WHY]
dynamic memory safety error detector (KASAN) catches and generates error
messages "BUG: KASAN: slab-out-of-bounds" as writeback connector does not
support certain features which are not initialized.

[HOW]
Skip them when connector type is DRM_MODE_CONNECTOR_WRITEBACK.

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3199
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Allow HPO PG for DCN35

[Why]
HPO can be power gated unconditionally for
DCN35.

[How]
Set disable flag to false.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable RCO for HDMISTREAMCLK in DCN35

[Why & How]
Enable root clock optimization for HDMISTREAMCLK and only
disable it when it's actively being used.

Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add dummy interface for tracing DCN32 SMU messages

[Why/How]
Some issues may require a trace of the previous SMU messages from DC to
understand the context and aid in debugging. Actual logging to be
implemented when needed.

Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable DTBCLK DTO earlier in the sequence

[why]
As per programming guide, we need to
enable the virtual pixel clock via DTBCLK
DTO and ungate the clock before we begin
programming OPP/OPTC control registers.
Otherwise, the double-buffered registers
will be left pending until the clocks are enabled.

[how]
Move the DTBCLK DTO programming up to
where we do the legacy DP DTO programming.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: update pipe topology log to support subvp

[why]
There is an ambiguity in subvp pipe topology log. The log doesn't show
subvp relation to main stream and it is not clear that certain stream
is an internal stream for subvp pipes.

[how]
Separate subvp pipe topology logging from main pipe topology. Log main
stream indices instead of the internal stream for subvp pipes.
The following is a sample log showing 2 streams with subvp enabled on
both:

   pipe topology update
 ________________________
| plane0  slice0  stream0|
|DPP1----OPP1----OTG1----|
| plane0  slice0  stream1|
|DPP0----OPP0----OTG0----|
|    (phantom pipes)     |
| plane0  slice0  stream0|
|DPP3----OPP3----OTG3----|
| plane0  slice0  stream1|
|DPP2----OPP2----OTG2----|
|________________________|

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add dmub additional interface support for FAMS

[WHY&HOW]
Update dmub and driver interface for future FAMS revisions.

Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use vm_update_mode=0 as default in sriov for gfx10.3 onwards

Apply this rule to all newer asics in sriov case.
For asic with VF MMIO access protection avoid using CPU for VM table updates.
CPU pagetable updates have issues with HDP flush as VF MMIO access protection
blocks write to BIF_BX_DEV0_EPF0_VF0_HDP_MEM_COHERENCY_FLUSH_CNTL register
during sriov runtime.
Moved the check to amdgpu_device_init() to ensure it is done after
amdgpu_device_ip_early_init() where the IP versions are discovered.

Signed-off-by: Danijel Slivka <danijel.slivka@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: add pipe1 hardware support

Enable pipe1 support starting from SIENNA CICHLID asic

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2117
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: select HDP ref/mask according to gfx ring pipe

Use correct ref/mask for differnent gfx ring pipe.
This should fix the gfx hang issue after enabling gfx pipe1.

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2117
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: handle invalid connector indices

[Why]
The function to count the number of valid connectors does not
guarantee that the first n indices are valid, only that there
exist n valid indices. When invalid indices are present, this
results in later valid connectors being missed, as processing
would end after checking n indices.

[How]
 - count valid indices separately from total indices examined
 - add explicit definition of MAX_LINKS

Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: FEC overhead should be checked once for mst slot nums

[Why] Mst slot nums equals to pbn / pbn_div.

Today, pbn_div refers to dm_mst_get_pbn_divider ->
dc_link_bandwidth_kbps. In dp_link_bandwidth_kbps,
which includes effect of FEC overhead already. As
result, we should not include effect of FEC overhead
again while calculating pbn by kpbs_to_peak_pbn
(stream_kbps).

[How] Include FEC overhead within dp_link_bandwidth_kbps.
Remove FEC overhead from kbps_to_peak_pbn.

Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: implement IRQ_STATE_ENABLE for SDMA v4.4.2

SDMA_CNTL is not set in some cases, driver configures it by itself.

v2: simplify code

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Expand supported Replay residency mode

[Why]
Dmub provides several Replay residency calculation methods,
but current interface only supports either ALPM or PHY mode

[How]
Modify the interface for supporting different types
of Replay residency calculation.

Reviewed-by: Robin Chen <robin.chen@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Leon Huang <leon.huang1@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Toggle additional RCO options in DCN35

[Why]
With root clock optimization now enabled for DCN35 there
are still RCO registers still not being toggled

[How]
Add in logic to toggle RCO registers for DPPCLK,
DPSTREAMCLK and DSCCLK

Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: optimize dml2 pipe resource allocation order

[why]
There could be cases that we are transition from MPC to ODM combine.
In this case if we map pipes before unmapping MPC pipes, we might
temporarly run out of pipes. The change reorders pipe resource
allocation. So we unmapping pipes before mapping new pipes.

Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix underflow in some two display subvp/non-subvp configs

[Why]
In two display configuration, switching between subvp and non-subvp
 may cause underflow because it moves an existing pipe between
 displays

[How]
Create helper function for applying pipe split flags
Apply pipe split flags prior to deciding on subvp
During subvp check, do not merge pipes, so it can retain previous
 pipe configuration
Add check for prev odm pipe in subvp check
For single display subvp case, use same odm policy for phantom pipes
 as main subvp pipe

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add timing pixel encoding for mst mode validation

[Why] Mode pbn is not calculated correctly because timing pixel encoding is
not checked within convert_dc_color_depth_into_bpc.

[How] Get mode kbps from dc_bandwidth_in_kbps_from_timing, then calculate
pbn by kbps_to_peak_pbn.

Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix compiler redefinition warnings for certain configs

[why & how]
Modified definitions of 1 function and 2 structs to remove warnings on
certain specific compiler configurations due to redefinition.

Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Mounika Adhuri <moadhuri@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add smu 14.0.1 discovery support

This patch to add smu 14.0.1 support

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/swsmu: Update smu v14.0.0 headers to be 14.0.1 compatible

update ppsmc.h pmfw.h and driver_if.h for smu v14_0_1

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: lima1002 <li.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu : Increase the mes log buffer size as per new MES FW version

From MES version 0x54, the log entry increased and require the log buffer
size to be increased. The 16k is maximum size agreed

Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Documentation: add a page on amdgpu debugging

Covers GPU page fault debugging and adds a reference
to umr.

v2: update client ids to include SQC/G
v3: Remove duplicate text
v4: add umr documentation link, fix typo

Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu : Add mes_log_enable to control mes log feature

The MES log might slow down the performance for extra step of log the data,
disable it by default and introduce a parameter can enable it when necessary

Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: fixes a random hang in S4 for SMU v13.0.4/11

While doing multiple S4 stress tests, GC/RLC/PMFW get into
an invalid state resulting into hard hangs.

Adding a GFX reset as workaround just before sending the
MP1_UNLOAD message avoids this failure.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: refine function signature of amdgpu_aca_get_error_data()

refine function signature of amdgpu_aca_get_error_data();

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add DCN 351 version for microcode load

There is a new DCN veriosn 3.5.1 need to load

Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Reset dGPU if suspend got aborted

For SOC21 ASICs, there is an issue in re-enabling PM features if a
suspend got aborted. In such cases, reset the device during resume
phase. This is a workaround till a proper solution is finalized.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amdgpu: add IP's FW information to devcoredump

Add FW information of all the IP's in the devcoredump.

Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/umsch: reinitialize write pointer in hw init

Otherwise the old one will be used during GPU reset.
That's not expected.

Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Refine IB schedule error logging

Downgrade to debug information when IBs are skipped. Also, use dev_* to
identify the device.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: make amdgpu device attr_update() function more efficient

v1:
add a new enumeration type to identify device attribute node,
this method is relatively more efficient compared with 'strcmp' in
update_attr() function.

v2:
rename device_attr_type to device_attr_id.

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Ma Jun <majun@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: always force full reset for SOC21

There are cases where soft reset seems to succeed, but
does not, so always use mode1/2 for now.

Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Reset GPU on queue preemption failure

Currently, with F32 HWS GPU reset is only when unmap queue fails.

However, if compute queue doesn't repond to preemption request in time
unmap will return without any error. In this case, only preemption error
is logged and Reset is not triggered. Call GPU reset in this case also.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix deadlock while reading mqd from debugfs

An errant disk backup on my desktop got into debugfs and triggered the
following deadlock scenario in the amdgpu debugfs files. The machine
also hard-resets immediately after those lines are printed (although I
wasn't able to reproduce that part when reading by hand):

[ 1318.016074][ T1082] ======================================================
[ 1318.016607][ T1082] WARNING: possible circular locking dependency detected
[ 1318.017107][ T1082] 6.8.0-rc7-00015-ge0c8221b72c0 #17 Not tainted
[ 1318.017598][ T1082] ------------------------------------------------------
[ 1318.018096][ T1082] tar/1082 is trying to acquire lock:
[ 1318.018585][ T1082] ffff98c44175d6a0 (&mm->mmap_lock){++++}-{3:3}, at: __might_fault+0x40/0x80
[ 1318.019084][ T1082]
[ 1318.019084][ T1082] but task is already holding lock:
[ 1318.020052][ T1082] ffff98c4c13f55f8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: amdgpu_debugfs_mqd_read+0x6a/0x250 [amdgpu]
[ 1318.020607][ T1082]
[ 1318.020607][ T1082] which lock already depends on the new lock.
[ 1318.020607][ T1082]
[ 1318.022081][ T1082]
[ 1318.022081][ T1082] the existing dependency chain (in reverse order) is:
[ 1318.023083][ T1082]
[ 1318.023083][ T1082] -> #2 (reservation_ww_class_mutex){+.+.}-{3:3}:
[ 1318.024114][ T1082]        __ww_mutex_lock.constprop.0+0xe0/0x12f0
[ 1318.024639][ T1082]        ww_mutex_lock+0x32/0x90
[ 1318.025161][ T1082]        dma_resv_lockdep+0x18a/0x330
[ 1318.025683][ T1082]        do_one_initcall+0x6a/0x350
[ 1318.026210][ T1082]        kernel_init_freeable+0x1a3/0x310
[ 1318.026728][ T1082]        kernel_init+0x15/0x1a0
[ 1318.027242][ T1082]        ret_from_fork+0x2c/0x40
[ 1318.027759][ T1082]        ret_from_fork_asm+0x11/0x20
[ 1318.028281][ T1082]
[ 1318.028281][ T1082] -> #1 (reservation_ww_class_acquire){+.+.}-{0:0}:
[ 1318.029297][ T1082]        dma_resv_lockdep+0x16c/0x330
[ 1318.029790][ T1082]        do_one_initcall+0x6a/0x350
[ 1318.030263][ T1082]        kernel_init_freeable+0x1a3/0x310
[ 1318.030722][ T1082]        kernel_init+0x15/0x1a0
[ 1318.031168][ T1082]        ret_from_fork+0x2c/0x40
[ 1318.031598][ T1082]        ret_from_fork_asm+0x11/0x20
[ 1318.032011][ T1082]
[ 1318.032011][ T1082] -> #0 (&mm->mmap_lock){++++}-{3:3}:
[ 1318.032778][ T1082]        __lock_acquire+0x14bf/0x2680
[ 1318.033141][ T1082]        lock_acquire+0xcd/0x2c0
[ 1318.033487][ T1082]        __might_fault+0x58/0x80
[ 1318.033814][ T1082]        amdgpu_debugfs_mqd_read+0x103/0x250 [amdgpu]
[ 1318.034181][ T1082]        full_proxy_read+0x55/0x80
[ 1318.034487][ T1082]        vfs_read+0xa7/0x360
[ 1318.034788][ T1082]        ksys_read+0x70/0xf0
[ 1318.035085][ T1082]        do_syscall_64+0x94/0x180
[ 1318.035375][ T1082]        entry_SYSCALL_64_after_hwframe+0x46/0x4e
[ 1318.035664][ T1082]
[ 1318.035664][ T1082] other info that might help us debug this:
[ 1318.035664][ T1082]
[ 1318.036487][ T1082] Chain exists of:
[ 1318.036487][ T1082]   &mm->mmap_lock --> reservation_ww_class_acquire --> reservation_ww_class_mutex
[ 1318.036487][ T1082]
[ 1318.037310][ T1082]  Possible unsafe locking scenario:
[ 1318.037310][ T1082]
[ 1318.037838][ T1082]        CPU0                    CPU1
[ 1318.038101][ T1082]        ----                    ----
[ 1318.038350][ T1082]   lock(reservation_ww_class_mutex);
[ 1318.038590][ T1082]                                lock(reservation_ww_class_acquire);
[ 1318.038839][ T1082]                                lock(reservation_ww_class_mutex);
[ 1318.039083][ T1082]   rlock(&mm->mmap_lock);
[ 1318.039328][ T1082]
[ 1318.039328][ T1082]  *** DEADLOCK ***
[ 1318.039328][ T1082]
[ 1318.040029][ T1082] 1 lock held by tar/1082:
[ 1318.040259][ T1082]  #0: ffff98c4c13f55f8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: amdgpu_debugfs_mqd_read+0x6a/0x250 [amdgpu]
[ 1318.040560][ T1082]
[ 1318.040560][ T1082] stack backtrace:
[ 1318.041053][ T1082] CPU: 22 PID: 1082 Comm: tar Not tainted 6.8.0-rc7-00015-ge0c8221b72c0 #17 3316c85d50e282c5643b075d1f01a4f6365e39c2
[ 1318.041329][ T1082] Hardware name: Gigabyte Technology Co., Ltd. B650 AORUS PRO AX/B650 AORUS PRO AX, BIOS F20 12/14/2023
[ 1318.041614][ T1082] Call Trace:
[ 1318.041895][ T1082]  <TASK>
[ 1318.042175][ T1082]  dump_stack_lvl+0x4a/0x80
[ 1318.042460][ T1082]  check_noncircular+0x145/0x160
[ 1318.042743][ T1082]  __lock_acquire+0x14bf/0x2680
[ 1318.043022][ T1082]  lock_acquire+0xcd/0x2c0
[ 1318.043301][ T1082]  ? __might_fault+0x40/0x80
[ 1318.043580][ T1082]  ? __might_fault+0x40/0x80
[ 1318.043856][ T1082]  __might_fault+0x58/0x80
[ 1318.044131][ T1082]  ? __might_fault+0x40/0x80
[ 1318.044408][ T1082]  amdgpu_debugfs_mqd_read+0x103/0x250 [amdgpu 8fe2afaa910cbd7654c8cab23563a94d6caebaab]
[ 1318.044749][ T1082]  full_proxy_read+0x55/0x80
[ 1318.045042][ T1082]  vfs_read+0xa7/0x360
[ 1318.045333][ T1082]  ksys_read+0x70/0xf0
[ 1318.045623][ T1082]  do_syscall_64+0x94/0x180
[ 1318.045913][ T1082]  ? do_syscall_64+0xa0/0x180
[ 1318.046201][ T1082]  ? lockdep_hardirqs_on+0x7d/0x100
[ 1318.046487][ T1082]  ? do_syscall_64+0xa0/0x180
[ 1318.046773][ T1082]  ? do_syscall_64+0xa0/0x180
[ 1318.047057][ T1082]  ? do_syscall_64+0xa0/0x180
[ 1318.047337][ T1082]  ? do_syscall_64+0xa0/0x180
[ 1318.047611][ T1082]  entry_SYSCALL_64_after_hwframe+0x46/0x4e
[ 1318.047887][ T1082] RIP: 0033:0x7f480b70a39d
[ 1318.048162][ T1082] Code: 91 ba 0d 00 f7 d8 64 89 02 b8 ff ff ff ff eb b2 e8 18 a3 01 00 0f 1f 84 00 00 00 00 00 80 3d a9 3c 0e 00 00 74 17 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 5b c3 66 2e 0f 1f 84 00 00 00 00 00 53 48 83
[ 1318.048769][ T1082] RSP: 002b:00007ffde77f5c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[ 1318.049083][ T1082] RAX: ffffffffffffffda RBX: 0000000000000800 RCX: 00007f480b70a39d
[ 1318.049392][ T1082] RDX: 0000000000000800 RSI: 000055c9f2120c00 RDI: 0000000000000008
[ 1318.049703][ T1082] RBP: 0000000000000800 R08: 000055c9f2120a94 R09: 0000000000000007
[ 1318.050011][ T1082] R10: 0000000000000000 R11: 0000000000000246 R12: 000055c9f2120c00
[ 1318.050324][ T1082] R13: 0000000000000008 R14: 0000000000000008 R15: 0000000000000800
[ 1318.050638][ T1082]  </TASK>

amdgpu_debugfs_mqd_read() holds a reservation when it calls
put_user(), which may fault and acquire the mmap_sem. This violates
the established locking order.

Bounce the mqd data through a kernel buffer to get put_user() out of
the illegal section.

Fixes: 445d85e3c1df ("drm/amdgpu: add debugfs interface for reading MQDs")
Cc: stable@vger.kernel.org # v6.5+
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable UMSCH 4.0.6

Share same codes with 4.0.5 and enable collaborate mode for VPE.

Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/umsch: update UMSCH 4.0 FW interface

Align with FW changes.

Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Set DCN351 BB and IP the same as DCN35

[WHY & HOW]
DCN351 and DCN35 should use the same bounding box and IP settings.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Xi Liu <xi.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.278

This version brings along following fixes:
- Fix some bound and NULL check
- Fix nonseamless transition from ODM + MPO to ODM + subvp
- Allow Z8 when stutter threshold is not met
- Remove plane and stream pointers from dc scratch
- Remove read/write to external register
- Increase number of hpo dp link encoders
- Increase clock table size
- Add new IPS config mode
- Build scaling params when a new plane is appended
- Refactor DML2 interfaces
- Allow idle opts for no flip case on PSR panel

Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Skip pipe if the pipe idx not set properly

[why]
Driver crashes when pipe idx not set properly

[how]
Add code to skip the pipe that idx not set properly

Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 0.0.210.0

 - Add Display PHY FSM command interface for automated testing

Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Modify DHCUB waterwark structures and functions

[WHY&HOW]
Converting the watermark set structure to a union and modifying some interfaces
to accommodate future usage.

Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove plane and stream pointers from dc scratch

[Why&How]
Remove several plane and stream pointers from dc for code
refactoring.

Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Increase number of hpo dp link encoders

[Why]
Number of hpo dp2 link encoders is increased.
Instances are changed.

[How]
Increased size in resource pool, init for each instance

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Sridevi Arvindekar <sridevi.arvindekar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Increase clock table size

[why&how]
To prevent out of bounds error, we need
to increase the clock table size.

Reviewed-by: Xi Liu <xi.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Allow Z8 when stutter threshold is not met for dcn35

[Why&How]
Some panels don't meet the stutter threshold (4k etc), this leads to
power regressions. Allow z8 for panels that don't meet the threshold
but support PSR/replay

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Allow Z8 when stutter threshold is not met

[Why&How]
Some panels don't meet the stutter threshold (4k etc), this leads to
power regressions. Allow z8 for panels that don't meet the threshold
but support PSR/replay

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add new IPS config mode

[Why]
We don't have a way to specify IPS2 for display off but RCG only for
static screen and local video playback.

[How]
Add a new setting that allows RCG only when displays are active but
IPS2 when all displays are off.

Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix bounds check for dcn35 DcfClocks

[Why]
NumFclkLevelsEnabled is used for DcfClocks bounds check
instead of designated NumDcfClkLevelsEnabled.
That can cause array index out-of-bounds access.

[How]
Use designated variable for dcn35 DcfClocks bounds check.

Fixes: a8edc9cc0b14 ("drm/amd/display: Fix array-index-out-of-bounds in dcn35_clkmgr")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove MPC rate control logic from DCN30 and above

[Why]
MPC flow rate control is not needed for DCN30 and above. Current logic
that uses it can result in underflow for certain edge cases (such as
DSC N422 + ODM combine + 422 left edge pixel).

[How]
Remove MPC flow rate control logic and programming for DCN30 and above.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: build scaling params when a new plane is appended

[why & how]
We are boundling changes in plane state and build scaling params
together. This is to simplify DML code so DML doesn't need to build
scaling params. We are also avoiding rebuilding scaling params for
planes without scaling changes.

Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix nonseamless transition from ODM + MPO to ODM + subvp

[why]
 when ODM + MPO is used for all 4 available pipes. Pipe transition will
 be nonseamless. Phantom OTG master pipe reuses the secondary OPP head
 pipe. There is no possible seamless path to transit to the new
 state. The correct logic would be to reuse a secondary DPP pipe as the
 phantom OTG master pipe. This way we are able to first transit the
 minimal transtion state of new and then transit to new state seamlessly.

 current                      New (nonseamless)
 ________________________     ________________________
 | plane0  slice0  stream0|   | plane0  slice0  stream0|
 |DPP0----OPP0----OTG0----|   |DPP0----OPP0----OTG0----|
 | plane1 |       |       |   | plane0  slice1 |       |
 |DPP2----|       |       |   |DPP2----OPP2----|       |
 | plane0  slice1 |       |   | plane0  slice0  stream1|
 |DPP1----OPP1----|       |   |DPP1----OPP1----OTG1----|
 | plane1 |               |   | plane0  slice1 |       |
 |DPP3----|               |   |DPP3----OPP3----|       |
 |________________________|   |________________________|

 New (seamless)               New (minimal transition)
 ________________________     ________________________
 | plane0  slice0  stream0|   | plane0  slice0  stream0|
 |DPP0----OPP0----OTG0----|   |DPP0----OPP0----OTG0----|
 | plane0  slice1 |       |   | plane0  slice1 |       |
 |DPP1----OPP1----|       |   |DPP1----OPP1----|       |
 | plane0  slice0  stream1|   |________________________|
 |DPP2----OPP2----OTG2----|
 | plane0  slice1 |       |
 |DPP3----OPP3----|       |
 |________________________|

[how]
Try to acquire free pipes used as secondary DPP pipes from current state
before try to acquire any free pipes for new OTG master pipe.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix a dereference of a NULL pointer

[why&how]
In some platform out_transfer_func may not be popualted. We need to check
for null before dereferencing it.

Fixes: d2dea1f14038 ("drm/amd/display: Generalize new minimal transition path")
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Added missing null checks

[why&how]
Add the missing null check before dereference for dc_stream_status*

Fixes: 2d5bb791e24f ("drm/amd/display: Implement update_planes_and_stream_v3 sequence")
Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Sohaib Nadeem <sohaib.nadeem@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactor DML2 interfaces

[Why&How}
Some interfaces needed changes to support future architectures.

Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Expand DML2 callbacks

[Why&How]
These additional callbacks to DC will be required for the DML2 wrapper. Also
consolidate common callbacks for projects to a single location for maintenance.

Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove read/write to external register

[why&how]
We need to remove the reference to these registers to
prevent any usage in the future.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Send DTBCLK disable message on first commit

[Why]
Previous patch to allow DTBCLK disable didn't address boot case. Driver
thinks DTBCLK is disabled by default, so we don't send disable message to
PMFW. DTBCLK is then enabled at idle desktop on boot, burning power.

[How]
Set dtbclk_en to true on boot so that disable message is sent during first
commit.

Fixes: 27750e176a4f ("drm/amd/display: Allow DTBCLK disable for DCN35")
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Consolidate HPO enable/disable and restrict only to state transitions.

[WHY]
Previously, we'd disabled HPO whenever an HPO display was disconnected. This
caused other HPO displays to blank whenever one was unplugged.

[HOW]
This change restricts HPO enable/disable to dce110_apply_ctx_to_hw and adds a
helper function (dce110_is_hpo_enabled) that returns true if any HPO displays
are present in a context. We compare the current and previous dc ctx to check
whether HPO is transitioning from on to off or vice versa, and adjust the HPO
state accordingly.

Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Natanel Roizenman <natanel.roizenman@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update dcn351 to latest dcn35 config

[why & how]
There were some fixes in dcn35 that need
to be ported over to dcn351 to prevent any
regression.

Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Reviewed-by: Liu, Xi (Alex) <xiliu102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix IPX enablement

We need to re-enable idle power optimizations after entering PSR. Since,
we get kicked out of idle power optimizations before entering PSR
(entering PSR requires us to write to DCN registers, which isn't allowed
while we are in IPS).

Fixes: a9b1a4f684b3 ("drm/amd/display: Add more checks for exiting idle in DC")
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Allow idle opts for no flip case on PSR panel

[Why & How]
There is a corner case where a single PSR panel
fails to enter idle optimizations if the panel
is not flipping (no planes or DPMS_OFF == true).
This is because the panel will not enter PSR if it's
not flipping, but this will prevent the FW idle opt
path from being executed. To handle this case we will
allow entry to idle opt from driver side even when a
PSR panel is connected under the following scenarios:
1. Only a single PSR panel is connected
2. PSR panel is not flipping

Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Flush GFXOFF requests in prepare stage

If the system hasn't entered GFXOFF when suspend starts it can cause
hangs accessing GC and RLC during the suspend stage.

Cc: <stable@vger.kernel.org> # 6.1.y: 5095d5418193 ("drm/amd: Evict resources during PM ops prepare() callback")
Cc: <stable@vger.kernel.org> # 6.1.y: cb11ca3233aa ("drm/amd: Add concept of running prepare_suspend() sequence for IP blocks")
Cc: <stable@vger.kernel.org> # 6.1.y: 2ceec37b0e3d ("drm/amd: Add missing kernel doc for prepare_suspend()")
Cc: <stable@vger.kernel.org> # 6.1.y: 3a9626c816db ("drm/amd: Stop evicting resources on APUs in suspend")
Cc: <stable@vger.kernel.org> # 6.6.y: 5095d5418193 ("drm/amd: Evict resources during PM ops prepare() callback")
Cc: <stable@vger.kernel.org> # 6.6.y: cb11ca3233aa ("drm/amd: Add concept of running prepare_suspend() sequence for IP blocks")
Cc: <stable@vger.kernel.org> # 6.6.y: 2ceec37b0e3d ("drm/amd: Add missing kernel doc for prepare_suspend()")
Cc: <stable@vger.kernel.org> # 6.6.y: 3a9626c816db ("drm/amd: Stop evicting resources on APUs in suspend")
Cc: <stable@vger.kernel.org> # 6.1+
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3132
Fixes: ab4750332dbe ("drm/amdgpu/sdma5.2: add begin/end_use ring callbacks")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix truncations in gfx_v11_0_init_microcode()

Reducing the size of ucode_prefix to 25 in the gfx_v11_0_init_microcode
function. This would ensure that the total number of characters being
written into fw_name does not exceed its size of 40.

Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c: In function ‘gfx_v11_0_early_init’:
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:523:54: warning: ‘_pfp.bin’ directive output may be truncated writing 8 bytes into a region of size between 4 and 33 [-Wformat-truncation=]
  523 |         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_pfp.bin", ucode_prefix);
      |                                                      ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:523:9: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 40
  523 |         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_pfp.bin", ucode_prefix);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:540:54: warning: ‘_me.bin’ directive output may be truncated writing 7 bytes into a region of size between 4 and 33 [-Wformat-truncation=]
  540 |         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_me.bin", ucode_prefix);
      |                                                      ^~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:540:9: note: ‘snprintf’ output between 15 and 44 bytes into a destination of size 40
  540 |         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_me.bin", ucode_prefix);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:557:70: warning: ‘_rlc.bin’ directive output may be truncated writing 8 bytes into a region of size between 4 and 33 [-Wformat-truncation=]
  557 |                         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", ucode_prefix);
      |                                                                      ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:557:25: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 40
  557 |                         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", ucode_prefix);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:569:54: warning: ‘_mec.bin’ directive output may be truncated writing 8 bytes into a region of size between 4 and 33 [-Wformat-truncation=]
  569 |         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", ucode_prefix);
      |                                                      ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:569:9: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 40
  569 |         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", ucode_prefix);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  CC [M]  drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_clockpowergating.o

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix truncation in smu_v11_0_init_microcode

Reducing the size of ucode_prefix to 25 in the smu_v11_0_init_microcode
function. we ensure that fw_name can accommodate the maximum possible
string size

Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/smu_v11_0.c: In function ‘smu_v11_0_init_microcode’:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/smu_v11_0.c:110:54: warning: ‘.bin’ directive output may be truncated writing 4 bytes into a region of size between 0 and 29 [-Wformat-truncation=]
  110 |         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
      |                                                      ^~~~
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/smu_v11_0.c:110:9: note: ‘snprintf’ output between 12 and 41 bytes into a destination of size 36
  110 |         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: simplify convert_error_address interface for UMC v12

Replace separate parameters with struct ta_ras_query_address_input.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix truncation issues in gfx_v9_0.c

The size of fw_name is increased to ensure that it can accommodate
the maximum possible size of the string being written into it.

Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c: In function ‘gfx_v9_0_early_init’:
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1255:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
 1255 |         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_pfp.bin", chip_name);
      |                                                    ^~
......
 1393 |                 r = gfx_v9_0_init_cp_gfx_microcode(adev, ucode_prefix);
      |                                                          ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1255:9: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 30
 1255 |         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_pfp.bin", chip_name);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1261:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
 1261 |         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_me.bin", chip_name);
      |                                                    ^~
......
 1393 |                 r = gfx_v9_0_init_cp_gfx_microcode(adev, ucode_prefix);
      |                                                          ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1261:9: note: ‘snprintf’ output between 15 and 44 bytes into a destination of size 30
 1261 |         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_me.bin", chip_name);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1267:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
 1267 |         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_ce.bin", chip_name);
      |                                                    ^~
......
 1393 |                 r = gfx_v9_0_init_cp_gfx_microcode(adev, ucode_prefix);
      |                                                          ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1267:9: note: ‘snprintf’ output between 15 and 44 bytes into a destination of size 30
 1267 |         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_ce.bin", chip_name);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1303:60: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
 1303 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc_am4.bin", chip_name);
      |                                                            ^~
......
 1398 |         r = gfx_v9_0_init_rlc_microcode(adev, ucode_prefix);
      |                                               ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1303:17: note: ‘snprintf’ output between 20 and 49 bytes into a destination of size 30
 1303 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc_am4.bin", chip_name);
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1309:60: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
 1309 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_kicker_rlc.bin", chip_name);
      |                                                            ^~
......
 1398 |         r = gfx_v9_0_init_rlc_microcode(adev, ucode_prefix);
      |                                               ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1309:17: note: ‘snprintf’ output between 23 and 52 bytes into a destination of size 30
 1309 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_kicker_rlc.bin", chip_name);
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1311:60: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
 1311 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", chip_name);
      |                                                            ^~
......
 1398 |         r = gfx_v9_0_init_rlc_microcode(adev, ucode_prefix);
      |                                               ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1311:17: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 30
 1311 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", chip_name);
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1344:60: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
 1344 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_sjt_mec.bin", chip_name);
      |                                                            ^~
......
 1402 |         r = gfx_v9_0_init_cp_compute_microcode(adev, ucode_prefix);
      |                                                      ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1344:17: note: ‘snprintf’ output between 20 and 49 bytes into a destination of size 30
 1344 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_sjt_mec.bin", chip_name);
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1346:60: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
 1346 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", chip_name);
      |                                                            ^~
......
 1402 |         r = gfx_v9_0_init_cp_compute_microcode(adev, ucode_prefix);
      |                                                      ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1346:17: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 30
 1346 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", chip_name);
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1356:68: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
 1356 |                         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_sjt_mec2.bin", chip_name);
      |                                                                    ^~
......
 1402 |         r = gfx_v9_0_init_cp_compute_microcode(adev, ucode_prefix);
      |                                                      ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1356:25: note: ‘snprintf’ output between 21 and 50 bytes into a destination of size 30
 1356 |                         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_sjt_mec2.bin", chip_name);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1358:68: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
 1358 |                         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec2.bin", chip_name);
      |                                                                    ^~
......
 1402 |         r = gfx_v9_0_init_cp_compute_microcode(adev, ucode_prefix);
      |                                                      ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1358:25: note: ‘snprintf’ output between 17 and 46 bytes into a destination of size 30
 1358 |                         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec2.bin", chip_name);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix truncation in gfx_v10_0_init_microcode

The total size of the fw_name buffer is 8 (for "amdgpu/") + 30 (for
ucode_prefix) + 5 (for "_pfp") + 5 (for "_wks") + 5 (for ".bin") = 53
characters.

Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c: In function ‘gfx_v10_0_early_init’:
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:3982:58: warning: ‘%s’ directive output may be truncated writing up to 4 bytes into a region of size between 0 and 29 [-Wformat-truncation=]
 3982 |         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_pfp%s.bin", ucode_prefix, wks);
      |                                                          ^~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:3982:9: note: ‘snprintf’ output between 16 and 49 bytes into a destination of size 40
 3982 |         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_pfp%s.bin", ucode_prefix, wks);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:3988:57: warning: ‘%s’ directive output may be truncated writing up to 4 bytes into a region of size between 1 and 30 [-Wformat-truncation=]
 3988 |         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_me%s.bin", ucode_prefix, wks);
      |                                                         ^~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:3988:9: note: ‘snprintf’ output between 15 and 48 bytes into a destination of size 40
 3988 |         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_me%s.bin", ucode_prefix, wks);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:3994:57: warning: ‘%s’ directive output may be truncated writing up to 4 bytes into a region of size between 1 and 30 [-Wformat-truncation=]
 3994 |         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_ce%s.bin", ucode_prefix, wks);
      |                                                         ^~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:3994:9: note: ‘snprintf’ output between 15 and 48 bytes into a destination of size 40
 3994 |         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_ce%s.bin", ucode_prefix, wks);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:4001:62: warning: ‘_rlc.bin’ directive output may be truncated writing 8 bytes into a region of size between 4 and 33 [-Wformat-truncation=]
 4001 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", ucode_prefix);
      |                                                              ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:4001:17: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 40
 4001 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", ucode_prefix);
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:4017:58: warning: ‘%s’ directive output may be truncated writing up to 4 bytes into a region of size between 0 and 29 [-Wformat-truncation=]
 4017 |         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec%s.bin", ucode_prefix, wks);
      |                                                          ^~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:4017:9: note: ‘snprintf’ output between 16 and 49 bytes into a destination of size 40
 4017 |         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec%s.bin", ucode_prefix, wks);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:4024:54: warning: ‘_mec2’ directive output may be truncated writing 5 bytes into a region of size between 4 and 33 [-Wformat-truncation=]
 4024 |         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec2%s.bin", ucode_prefix, wks);
      |                                                      ^~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:4024:9: note: ‘snprintf’ output between 17 and 50 bytes into a destination of size 40
 4024 |         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec2%s.bin", ucode_prefix, wks);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix 'fw_name' buffer size to prevent truncations in amdgpu_mes_init_microcode

The snprintf function is used to write a formatted string into fw_name.
The format of the string is "amdgpu/%s_mes%s.bin", where %s is replaced
by the string in ucode_prefix and the second %s is replaced by either
"_2" or "1" depending on the condition pipe == AMDGPU_MES_SCHED_PIPE.

The length of the string "amdgpu/%s_mes%s.bin" is 16 characters plus the
length of ucode_prefix and the length of the string "_2" or "1". The
size of ucode_prefix is 30, so the maximum length of ucode_prefix is 29
characters (since one character is needed for the null terminator).
Therefore, the maximum possible length of the string written into
fw_name is 16 + 29 + 2 = 47 characters.

The size of fw_name is 40, so if the length of the string written into
fw_name is more than 39 characters (since one character is needed for
the null terminator), it will be truncated by the snprintf function, and
thus warnings will be seen.

By increasing the size of fw_name to 50, we ensure that fw_name is
large enough to hold the maximum possible length of the string, so the
snprintf function will not truncate the output.

Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c: In function ‘amdgpu_mes_init_microcode’:
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1482:66: warning: ‘%s’ directive output may be truncated writing up to 1 bytes into a region of size between 0 and 29 [-Wformat-truncation=]
 1482 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin",
      |                                                                  ^~
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1482:17: note: ‘snprintf’ output between 16 and 46 bytes into a destination of size 40
 1482 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin",
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 1483 |                          ucode_prefix,
      |                          ~~~~~~~~~~~~~
 1484 |                          pipe == AMDGPU_MES_SCHED_PIPE ? "" : "1");
      |                          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1477:66: warning: ‘%s’ directive output may be truncated writing 1 byte into a region of size between 0 and 29 [-Wformat-truncation=]
 1477 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin",
      |                                                                  ^~
 1478 |                          ucode_prefix,
 1479 |                          pipe == AMDGPU_MES_SCHED_PIPE ? "_2" : "1");
      |                                                                 ~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1477:17: note: ‘snprintf’ output between 17 and 46 bytes into a destination of size 40
 1477 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin",
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 1478 |                          ucode_prefix,
      |                          ~~~~~~~~~~~~~
 1479 |                          pipe == AMDGPU_MES_SCHED_PIPE ? "_2" : "1");
      |                          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1477:66: warning: ‘%s’ directive output may be truncated writing 2 bytes into a region of size between 0 and 29 [-Wformat-truncation=]
 1477 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin",
      |                                                                  ^~
 1478 |                          ucode_prefix,
 1479 |                          pipe == AMDGPU_MES_SCHED_PIPE ? "_2" : "1");
      |                                                          ~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1477:17: note: ‘snprintf’ output between 18 and 47 bytes into a destination of size 40
 1477 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin",
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 1478 |                          ucode_prefix,
      |                          ~~~~~~~~~~~~~
 1479 |                          pipe == AMDGPU_MES_SCHED_PIPE ? "_2" : "1");
      |                          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1489:62: warning: ‘_mes.bin’ directive output may be truncated writing 8 bytes into a region of size between 4 and 33 [-Wformat-truncation=]
 1489 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes.bin",
      |                                                              ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1489:17: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 40
 1489 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes.bin",
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 1490 |                          ucode_prefix);
      |                          ~~~~~~~~~~~~~

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix format character cut-off issues in amdgpu_vcn_early_init()

Reducing the size of ucode_prefix to 25 in the amdgpu_vcn_early_init
function. This would ensure that the total number of characters being
written into fw_name does not exceed its size of 40.

Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c: In function ‘amdgpu_vcn_early_init’:
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c:102:66: warning: ‘snprintf’ output may be truncated before the last format character [-Wformat-truncation=]
  102 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
      |                                                                  ^
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c:102:17: note: ‘snprintf’ output between 12 and 41 bytes into a destination of size 40
  102 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c:102:66: warning: ‘snprintf’ output may be truncated before the last format character [-Wformat-truncation=]
  102 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
      |                                                                  ^
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c:102:17: note: ‘snprintf’ output between 12 and 41 bytes into a destination of size 40
  102 |                 snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c:105:73: warning: ‘.bin’ directive output may be truncated writing 4 bytes into a region of size between 2 and 31 [-Wformat-truncation=]
  105 |                         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_%d.bin", ucode_prefix, i);
      |                                                                         ^~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c:105:25: note: ‘snprintf’ output between 14 and 43 bytes into a destination of size 40
  105 |                         snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_%d.bin", ucode_prefix, i);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add socket id parameter for psp query address cmd

And set the socket id.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Cleanup workqueue during module unload

Destroy the high priority workqueue that handles interrupts
during KFD node cleanup.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: range check cp bad op exception interrupts

Due to a CP interrupt bug, bad packet garbage exception codes are raised.
Do a range check so that the debugger and runtime do not receive garbage
codes.
Update the user api to guard exception code type checking as well.

Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Tested-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/display: Fix sending VSC (+ colorimetry) packets for DP/eDP displays without PSR"

This causes flicker on a bunch of eDP panels. The info_packet code
also caused regressions on other OSes that we haven't' seen on Linux
yet, but that is likely due to the fact that we haven't had a chance
to test those environments on Linux.

We'll need to revisit this.

This reverts commit 202260f64519e591b5cd99626e441b6559f571a3.

Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3207
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3151
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add a NULL check for freeing root PT

This patch adds a NULL check to fix this crash reported during the
freeing of root PT entry:

 BUG: unable to handle page fault for address: ffffc9002d637aa0
 #PF: supervisor write access in kernel mode
 #PF: error_code(0x0002) - not-present page
 RIP: 0010:amdgpu_vm_pt_free+0x66/0xe0 [amdgpu]
 PKRU: 55555554
 Call Trace:
 <TASK>
  amdgpu_vm_pt_free_root+0x60/0xa0 [amdgpu]
  amdgpu_vm_fini+0x2cb/0x5d0 [amdgpu]
  ? amdgpu_ctx_mgr_entity_fini+0x53/0x1c0 [amdgpu]
  amdgpu_driver_postclose_kms+0x191/0x2d0 [amdgpu]
  drm_file_free.part.0+0x1e5/0x260 [drm]

Cc: Christian König <Christian.Koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Acked-by: Christian König <Christian.Koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: fix TLB flush after unmap for GFX9.4.2

TLB flush after unmap accidentially was removed on
gfx9.4.2. It is to add it back.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: refactor code to split devcoredump code

Refractor devcoredump code into new files since its
functionality is expanded further and better to slit
and devcoredump to have its own file.

v2: Fix the build failure caught by arm compiler
of implicit function declaration with #ifdef

v3: squash in fix for implicit declaration error

Cc: Ivan Lipski <ivan.lipski@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.277

This version brings along following fixes:
- Fix few problems for DCN35
- Fix a bug which dereferences freed memory
- Enable new interface design for alternate scrambling
- Enhance IPS handshake
- Increase Z8 watermark times
- Fix DML2 problem
- Revert patch which cause regression
- Fix problems for dmub idle power optimization

Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add TB_BORROWED_MAX definition

[Why & How]
For DML2 to decouple it from other DML versions.

Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix a bug to dereference already freed old current state memory

[why]
During minimal transition commit, the base state could be freed if it is current state.
This is because after committing minimal transition state, the current state will be
swapped to the minimal transition state and the old current state will be released.
the release could cause the old current state's memory to be freed. However dc
will derefernce this memory when release minimal transition state. Therefore, we
need to retain the old current state until we release minimal transition state.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vpe: power on vpe when hw_init

To fix mode2 reset failure.
Should power on VPE when hw_init.

Signed-off-by: Peyton Lee <peytolee@amd.com>
Reviewed-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm set pp_dpm_*clk as read only for SRIOV one VF mode

pp_dpm_*clk should be set as read only for SRIOV one VF mode, remove
S_IWUGO flag and _store function of these debugfs in one VF mode.

Signed-off-by: Lin.Cao <lincao12@amd.com>
Acked-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable reallow for idle on DCN35

[Why]
It was previously disabled for stability purposes, but command
submission causes residency issues in IPS video playback.

[How]
Enable the disallow/reallow pattern back. There's additional checks
now in DMCUB that should make this safer stability wise.

Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable new interface design for alternate scrambling

[why & how]
To enable a new interface so alternate scrambling can be done via
security module.

Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove unnecessary hard coded DPM states

[Why]

The hard coded DPM states are only used to fix mismatch states numbers from FW.

[How]

Remove when not needed.

Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Xi Liu <xi.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add optional optimization for IPS handshake

[Why]
It's possible to skip parts of the eval and exit sequencing if we know
whether DCN is in IPS2 already or if it's committed to going to idle
and not in IPS2.

[How]
Skip IPS2 entry/exit if DMCUB is idle but the IPS2 commit is not set.

Skip the eval delay if DMCUB is already in IPS2 since we know we need
to exit.

These are turned off by default.

Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>