From: Jarod Wilson Date: Mon, 17 Oct 2016 19:54:15 +0000 (-0400) Subject: ethernet/tile: use core min/max MTU checking X-Git-Tag: microblaze-4.13-rc1~1155^2~449^2~2 X-Git-Url: http://git.monstr.eu/?a=commitdiff_plain;h=f58f0817d78a8418f1f33a30be09fcb34184cc94;p=linux-2.6-microblaze.git ethernet/tile: use core min/max MTU checking tilegx: min_mtu 68, max_mtu 1500 or 9000, depending on modparam - remove tile_net_change_mtu now that it is fully redundant tilepro: min_mtu 68, max_mtu 1500 - hardware supports jumbo packets up to 10226, but it's not implemented or tested yet, according to code comments CC: netdev@vger.kernel.org CC: Chris Metcalf Signed-off-by: Jarod Wilson Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/tile/tilegx.c b/drivers/net/ethernet/tile/tilegx.c index 11213a38c795..0aaf975bb347 100644 --- a/drivers/net/ethernet/tile/tilegx.c +++ b/drivers/net/ethernet/tile/tilegx.c @@ -59,6 +59,9 @@ /* Maximum number of packets to handle per "poll". */ #define TILE_NET_WEIGHT 64 +/* Maximum Jumbo Packet MTU */ +#define TILE_JUMBO_MAX_MTU 9000 + /* Number of entries in each iqueue. */ #define IQUEUE_ENTRIES 512 @@ -2101,17 +2104,6 @@ static int tile_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) return -EOPNOTSUPP; } -/* Change the MTU. */ -static int tile_net_change_mtu(struct net_device *dev, int new_mtu) -{ - if (new_mtu < 68) - return -EINVAL; - if (new_mtu > ((jumbo_num != 0) ? 9000 : 1500)) - return -EINVAL; - dev->mtu = new_mtu; - return 0; -} - /* Change the Ethernet address of the NIC. * * The hypervisor driver does not support changing MAC address. However, @@ -2154,7 +2146,6 @@ static const struct net_device_ops tile_net_ops = { .ndo_start_xmit = tile_net_tx, .ndo_select_queue = tile_net_select_queue, .ndo_do_ioctl = tile_net_ioctl, - .ndo_change_mtu = tile_net_change_mtu, .ndo_tx_timeout = tile_net_tx_timeout, .ndo_set_mac_address = tile_net_set_mac_address, #ifdef CONFIG_NET_POLL_CONTROLLER @@ -2174,7 +2165,11 @@ static void tile_net_setup(struct net_device *dev) ether_setup(dev); dev->netdev_ops = &tile_net_ops; dev->watchdog_timeo = TILE_NET_TIMEOUT; - dev->mtu = 1500; + + /* MTU range: 68 - 1500 or 9000 */ + dev->mtu = ETH_DATA_LEN; + dev->min_mtu = ETH_MIN_MTU; + dev->max_mtu = jumbo_num ? TILE_JUMBO_MAX_MTU : ETH_DATA_LEN; features |= NETIF_F_HW_CSUM; features |= NETIF_F_SG; diff --git a/drivers/net/ethernet/tile/tilepro.c b/drivers/net/ethernet/tile/tilepro.c index 4ef605a90247..0a3b7dafa3ba 100644 --- a/drivers/net/ethernet/tile/tilepro.c +++ b/drivers/net/ethernet/tile/tilepro.c @@ -87,7 +87,7 @@ /* This should be 1500 if "jumbo" is not set in LIPP. */ /* This should be at most 10226 (10240 - 14) if "jumbo" is set in LIPP. */ /* ISSUE: This has not been thoroughly tested (except at 1500). */ -#define TILE_NET_MTU 1500 +#define TILE_NET_MTU ETH_DATA_LEN /* HACK: Define this to verify incoming packets. */ /* #define TILE_NET_VERIFY_INGRESS */ @@ -2095,26 +2095,6 @@ static struct rtnl_link_stats64 *tile_net_get_stats64(struct net_device *dev, } -/* - * Change the "mtu". - * - * The "change_mtu" method is usually not needed. - * If you need it, it must be like this. - */ -static int tile_net_change_mtu(struct net_device *dev, int new_mtu) -{ - PDEBUG("tile_net_change_mtu()\n"); - - /* Check ranges. */ - if ((new_mtu < 68) || (new_mtu > 1500)) - return -EINVAL; - - /* Accept the value. */ - dev->mtu = new_mtu; - - return 0; -} - /* * Change the Ethernet Address of the NIC. @@ -2229,7 +2209,6 @@ static const struct net_device_ops tile_net_ops = { .ndo_start_xmit = tile_net_tx, .ndo_do_ioctl = tile_net_ioctl, .ndo_get_stats64 = tile_net_get_stats64, - .ndo_change_mtu = tile_net_change_mtu, .ndo_tx_timeout = tile_net_tx_timeout, .ndo_set_mac_address = tile_net_set_mac_address, #ifdef CONFIG_NET_POLL_CONTROLLER @@ -2252,7 +2231,11 @@ static void tile_net_setup(struct net_device *dev) dev->netdev_ops = &tile_net_ops; dev->watchdog_timeo = TILE_NET_TIMEOUT; dev->tx_queue_len = TILE_NET_TX_QUEUE_LEN; + + /* MTU range: 68 - 1500 */ dev->mtu = TILE_NET_MTU; + dev->min_mtu = ETH_MIN_MTU; + dev->max_mtu = TILE_NET_MTU; features |= NETIF_F_HW_CSUM; features |= NETIF_F_SG;