From: Merlijn Wajer Date: Tue, 30 Jun 2020 18:47:40 +0000 (-0700) Subject: ARM: dts: n900: remove mmc1 card detect gpio X-Git-Tag: microblaze-v5.10~73^2~6 X-Git-Url: http://git.monstr.eu/?a=commitdiff_plain;h=ed3e98e919aaaa47e9d9f8a40c3f6f4a22577842;p=linux-2.6-microblaze.git ARM: dts: n900: remove mmc1 card detect gpio Instead, expose the key via the input framework, as SW_MACHINE_COVER The chip-detect GPIO is actually detecting if the cover is closed. Technically it's possible to use the SD card with open cover. The only downside is risk of battery falling out and user being able to physically remove the card. The behaviour of SD card not being available when the device is open is unexpected and creates more problems than it solves. There is a high chance, that more people accidentally break their rootfs by opening the case without physically removing the card. Reviewed-by: Sebastian Reichel Acked-by: Tony Lindgren Signed-off-by: Merlijn Wajer Link: https://lore.kernel.org/r/20200612125402.18393-3-merlijn@wizzup.org Signed-off-by: Dmitry Torokhov --- diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 4089d97405c9..3dbcae3d60d2 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -105,6 +105,14 @@ linux,code = ; linux,can-disable; }; + + machine_cover { + label = "Machine Cover"; + gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */ + linux,input-type = ; + linux,code = ; + linux,can-disable; + }; }; isp1707: isp1707 { @@ -819,10 +827,6 @@ pinctrl-0 = <&mmc1_pins>; vmmc-supply = <&vmmc1>; bus-width = <4>; - /* For debugging, it is often good idea to remove this GPIO. - It means you can remove back cover (to reboot by removing - battery) and still use the MMC card. */ - cd-gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */ }; /* most boards use vaux3, only some old versions use vmmc2 instead */