From: Hans de Goede Date: Sun, 21 Mar 2021 11:31:08 +0000 (+0100) Subject: platform/x86: thinkpad_acpi: Disable DYTC CQL mode around switching to balanced mode X-Git-Tag: microblaze-v5.14~288^2~13 X-Git-Url: http://git.monstr.eu/?a=commitdiff_plain;h=ec0e8fc416f70645608c146dcf90d264b2ad6e3c;p=linux-2.6-microblaze.git platform/x86: thinkpad_acpi: Disable DYTC CQL mode around switching to balanced mode Testing has shown that setting /sys/firmware/acpi/platform_profile to "balanced" when /sys/bus/platform/devices/thinkpad_acpi/dytc_lapmode reports 1, causes dytc_lapmode to get reset to 0 and then it becomes stuck at 0 for aprox. 30 minutes even if the laptop is used on a lap. Disabling CQL (when enabled) before issuing the DYTC_CMD_RESET to get back to balanced mode and re-enabling it afterwards again, like the code already does when switching to low-power / performance mode fixes this. Fixes: c3bfcd4c6762 ("platform/x86: thinkpad_acpi: Add platform profile support") Tested-by: Mark Pearson Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20210321113108.7069-1-hdegoede@redhat.com --- diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 8569c1d2a52c..0d9e2ddbf904 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -10187,8 +10187,13 @@ static int dytc_profile_set(struct platform_profile_handler *pprof, return err; if (profile == PLATFORM_PROFILE_BALANCED) { - /* To get back to balanced mode we just issue a reset command */ - err = dytc_command(DYTC_CMD_RESET, &output); + /* + * To get back to balanced mode we need to issue a reset command. + * Note we still need to disable CQL mode before hand and re-enable + * it afterwards, otherwise dytc_lapmode gets reset to 0 and stays + * stuck at 0 for aprox. 30 minutes. + */ + err = dytc_cql_command(DYTC_CMD_RESET, &output); if (err) goto unlock; } else {