From: Quentin Perret Date: Thu, 12 Sep 2019 09:44:04 +0000 (+0200) Subject: sched/fair: Speed-up energy-aware wake-ups X-Git-Tag: microblaze-v5.5-rc1~205^2~2 X-Git-Url: http://git.monstr.eu/?a=commitdiff_plain;h=eb92692b2544;p=linux-2.6-microblaze.git sched/fair: Speed-up energy-aware wake-ups EAS computes the energy impact of migrating a waking task when deciding on which CPU it should run. However, the current approach is known to have a high algorithmic complexity, which can result in prohibitively high wake-up latencies on systems with complex energy models, such as systems with per-CPU DVFS. On such systems, the algorithm complexity is in O(n^2) (ignoring the cost of searching for performance states in the EM) with 'n' the number of CPUs. To address this, re-factor the EAS wake-up path to compute the energy 'delta' (with and without the task) on a per-performance domain basis, rather than system-wide, which brings the complexity down to O(n). No functional changes intended. Test results ~~~~~~~~~~~~ * Setup: Tested on a Google Pixel 3, with a Snapdragon 845 (4+4 CPUs, A55/A75). Base kernel is 5.3-rc5 + Pixel3 specific patches. Android userspace, no graphics. * Test case: Run a periodic rt-app task, with 16ms period, ramping down from 70% to 10%, in 5% steps of 500 ms each (json avail. at [1]). Frequencies of all CPUs are pinned to max (using scaling_min_freq CPUFreq sysfs entries) to reduce variability. The time to run select_task_rq_fair() is measured using the function profiler (/sys/kernel/debug/tracing/trace_stat/function*). See the test script for more details [2]. Test 1: I hacked the DT to 'fake' per-CPU DVFS. That is, we end up with one CPUFreq policy per CPU (8 policies in total). Since all frequencies are pinned to max for the test, this should have no impact on the actual frequency selection, but it does in the EAS calculation. +---------------------------+----------------------------------+ | Without patch | With patch | +-----+-----+----------+----------+-----+-----------------+----------+ | CPU | Hit | Avg (us) | s^2 (us) | Hit | Avg (us) | s^2 (us) | |-----+-----+----------+----------+-----+-----------------+----------+ | 0 | 274 | 38.303 | 1750.239 | 401 | 14.126 (-63.1%) | 146.625 | | 1 | 197 | 49.529 | 1695.852 | 314 | 16.135 (-67.4%) | 167.525 | | 2 | 142 | 34.296 | 1758.665 | 302 | 14.133 (-58.8%) | 130.071 | | 3 | 172 | 31.734 | 1490.975 | 641 | 14.637 (-53.9%) | 139.189 | | 4 | 316 | 7.834 | 178.217 | 425 | 5.413 (-30.9%) | 20.803 | | 5 | 447 | 8.424 | 144.638 | 556 | 5.929 (-29.6%) | 27.301 | | 6 | 581 | 14.886 | 346.793 | 456 | 5.711 (-61.6%) | 23.124 | | 7 | 456 | 10.005 | 211.187 | 997 | 4.708 (-52.9%) | 21.144 | +-----+-----+----------+----------+-----+-----------------+----------+ * Hit, Avg and s^2 are as reported by the function profiler Test 2: I also ran the same test with a normal DT, with 2 CPUFreq policies, to see if this causes regressions in the most common case. +---------------------------+----------------------------------+ | Without patch | With patch | +-----+-----+----------+----------+-----+-----------------+----------+ | CPU | Hit | Avg (us) | s^2 (us) | Hit | Avg (us) | s^2 (us) | |-----+-----+----------+----------+-----+-----------------+----------+ | 0 | 345 | 22.184 | 215.321 | 580 | 18.635 (-16.0%) | 146.892 | | 1 | 358 | 18.597 | 200.596 | 438 | 12.934 (-30.5%) | 104.604 | | 2 | 359 | 25.566 | 200.217 | 397 | 10.826 (-57.7%) | 74.021 | | 3 | 362 | 16.881 | 200.291 | 718 | 11.455 (-32.1%) | 102.280 | | 4 | 457 | 3.822 | 9.895 | 757 | 4.616 (+20.8%) | 13.369 | | 5 | 344 | 4.301 | 7.121 | 594 | 5.320 (+23.7%) | 18.798 | | 6 | 472 | 4.326 | 7.849 | 464 | 5.648 (+30.6%) | 22.022 | | 7 | 331 | 4.630 | 13.937 | 408 | 5.299 (+14.4%) | 18.273 | +-----+-----+----------+----------+-----+-----------------+----------+ * Hit, Avg and s^2 are as reported by the function profiler In addition to these two tests, I also ran 50 iterations of the Lisa EAS functional test suite [3] with this patch applied on Arm Juno r0, Arm Juno r2, Arm TC2 and Hikey960, and could not see any regressions (all EAS functional tests are passing). [1] https://paste.debian.net/1100055/ [2] https://paste.debian.net/1100057/ [3] https://github.com/ARM-software/lisa/blob/master/lisa/tests/scheduler/eas_behaviour.py Signed-off-by: Quentin Perret Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: dietmar.eggemann@arm.com Cc: juri.lelli@redhat.com Cc: morten.rasmussen@arm.com Cc: qais.yousef@arm.com Cc: qperret@qperret.net Cc: rjw@rjwysocki.net Cc: tkjos@google.com Cc: valentin.schneider@arm.com Cc: vincent.guittot@linaro.org Link: https://lkml.kernel.org/r/20190912094404.13802-1-qperret@qperret.net Signed-off-by: Ingo Molnar --- diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index 1054d2cf6aaa..8b665110a44a 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -6251,69 +6251,55 @@ static unsigned long cpu_util_next(int cpu, struct task_struct *p, int dst_cpu) } /* - * compute_energy(): Estimates the energy that would be consumed if @p was + * compute_energy(): Estimates the energy that @pd would consume if @p was * migrated to @dst_cpu. compute_energy() predicts what will be the utilization - * landscape of the * CPUs after the task migration, and uses the Energy Model + * landscape of @pd's CPUs after the task migration, and uses the Energy Model * to compute what would be the energy if we decided to actually migrate that * task. */ static long compute_energy(struct task_struct *p, int dst_cpu, struct perf_domain *pd) { - unsigned int max_util, util_cfs, cpu_util, cpu_cap; - unsigned long sum_util, energy = 0; - struct task_struct *tsk; + struct cpumask *pd_mask = perf_domain_span(pd); + unsigned long cpu_cap = arch_scale_cpu_capacity(cpumask_first(pd_mask)); + unsigned long max_util = 0, sum_util = 0; int cpu; - for (; pd; pd = pd->next) { - struct cpumask *pd_mask = perf_domain_span(pd); + /* + * The capacity state of CPUs of the current rd can be driven by CPUs + * of another rd if they belong to the same pd. So, account for the + * utilization of these CPUs too by masking pd with cpu_online_mask + * instead of the rd span. + * + * If an entire pd is outside of the current rd, it will not appear in + * its pd list and will not be accounted by compute_energy(). + */ + for_each_cpu_and(cpu, pd_mask, cpu_online_mask) { + unsigned long cpu_util, util_cfs = cpu_util_next(cpu, p, dst_cpu); + struct task_struct *tsk = cpu == dst_cpu ? p : NULL; /* - * The energy model mandates all the CPUs of a performance - * domain have the same capacity. + * Busy time computation: utilization clamping is not + * required since the ratio (sum_util / cpu_capacity) + * is already enough to scale the EM reported power + * consumption at the (eventually clamped) cpu_capacity. */ - cpu_cap = arch_scale_cpu_capacity(cpumask_first(pd_mask)); - max_util = sum_util = 0; + sum_util += schedutil_cpu_util(cpu, util_cfs, cpu_cap, + ENERGY_UTIL, NULL); /* - * The capacity state of CPUs of the current rd can be driven by - * CPUs of another rd if they belong to the same performance - * domain. So, account for the utilization of these CPUs too - * by masking pd with cpu_online_mask instead of the rd span. - * - * If an entire performance domain is outside of the current rd, - * it will not appear in its pd list and will not be accounted - * by compute_energy(). + * Performance domain frequency: utilization clamping + * must be considered since it affects the selection + * of the performance domain frequency. + * NOTE: in case RT tasks are running, by default the + * FREQUENCY_UTIL's utilization can be max OPP. */ - for_each_cpu_and(cpu, pd_mask, cpu_online_mask) { - util_cfs = cpu_util_next(cpu, p, dst_cpu); - - /* - * Busy time computation: utilization clamping is not - * required since the ratio (sum_util / cpu_capacity) - * is already enough to scale the EM reported power - * consumption at the (eventually clamped) cpu_capacity. - */ - sum_util += schedutil_cpu_util(cpu, util_cfs, cpu_cap, - ENERGY_UTIL, NULL); - - /* - * Performance domain frequency: utilization clamping - * must be considered since it affects the selection - * of the performance domain frequency. - * NOTE: in case RT tasks are running, by default the - * FREQUENCY_UTIL's utilization can be max OPP. - */ - tsk = cpu == dst_cpu ? p : NULL; - cpu_util = schedutil_cpu_util(cpu, util_cfs, cpu_cap, - FREQUENCY_UTIL, tsk); - max_util = max(max_util, cpu_util); - } - - energy += em_pd_energy(pd->em_pd, max_util, sum_util); + cpu_util = schedutil_cpu_util(cpu, util_cfs, cpu_cap, + FREQUENCY_UTIL, tsk); + max_util = max(max_util, cpu_util); } - return energy; + return em_pd_energy(pd->em_pd, max_util, sum_util); } /* @@ -6355,21 +6341,19 @@ compute_energy(struct task_struct *p, int dst_cpu, struct perf_domain *pd) * other use-cases too. So, until someone finds a better way to solve this, * let's keep things simple by re-using the existing slow path. */ - static int find_energy_efficient_cpu(struct task_struct *p, int prev_cpu) { - unsigned long prev_energy = ULONG_MAX, best_energy = ULONG_MAX; + unsigned long prev_delta = ULONG_MAX, best_delta = ULONG_MAX; struct root_domain *rd = cpu_rq(smp_processor_id())->rd; + unsigned long cpu_cap, util, base_energy = 0; int cpu, best_energy_cpu = prev_cpu; - struct perf_domain *head, *pd; - unsigned long cpu_cap, util; struct sched_domain *sd; + struct perf_domain *pd; rcu_read_lock(); pd = rcu_dereference(rd->pd); if (!pd || READ_ONCE(rd->overutilized)) goto fail; - head = pd; /* * Energy-aware wake-up happens on the lowest sched_domain starting @@ -6386,9 +6370,14 @@ static int find_energy_efficient_cpu(struct task_struct *p, int prev_cpu) goto unlock; for (; pd; pd = pd->next) { - unsigned long cur_energy, spare_cap, max_spare_cap = 0; + unsigned long cur_delta, spare_cap, max_spare_cap = 0; + unsigned long base_energy_pd; int max_spare_cap_cpu = -1; + /* Compute the 'base' energy of the pd, without @p */ + base_energy_pd = compute_energy(p, -1, pd); + base_energy += base_energy_pd; + for_each_cpu_and(cpu, perf_domain_span(pd), sched_domain_span(sd)) { if (!cpumask_test_cpu(cpu, p->cpus_ptr)) continue; @@ -6401,9 +6390,9 @@ static int find_energy_efficient_cpu(struct task_struct *p, int prev_cpu) /* Always use prev_cpu as a candidate. */ if (cpu == prev_cpu) { - prev_energy = compute_energy(p, prev_cpu, head); - best_energy = min(best_energy, prev_energy); - continue; + prev_delta = compute_energy(p, prev_cpu, pd); + prev_delta -= base_energy_pd; + best_delta = min(best_delta, prev_delta); } /* @@ -6419,9 +6408,10 @@ static int find_energy_efficient_cpu(struct task_struct *p, int prev_cpu) /* Evaluate the energy impact of using this CPU. */ if (max_spare_cap_cpu >= 0) { - cur_energy = compute_energy(p, max_spare_cap_cpu, head); - if (cur_energy < best_energy) { - best_energy = cur_energy; + cur_delta = compute_energy(p, max_spare_cap_cpu, pd); + cur_delta -= base_energy_pd; + if (cur_delta < best_delta) { + best_delta = cur_delta; best_energy_cpu = max_spare_cap_cpu; } } @@ -6433,10 +6423,10 @@ unlock: * Pick the best CPU if prev_cpu cannot be used, or if it saves at * least 6% of the energy used by prev_cpu. */ - if (prev_energy == ULONG_MAX) + if (prev_delta == ULONG_MAX) return best_energy_cpu; - if ((prev_energy - best_energy) > (prev_energy >> 4)) + if ((prev_delta - best_delta) > ((prev_delta + base_energy) >> 4)) return best_energy_cpu; return prev_cpu;