From: Linus Torvalds Date: Thu, 29 May 2025 15:22:07 +0000 (-0700) Subject: Merge tag 'devicetree-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git... X-Git-Url: http://git.monstr.eu/?a=commitdiff_plain;h=bf373e4c786bfe989e637195252698f45b157a68;p=linux-2.6-microblaze.git Merge tag 'devicetree-for-6.16' of git://git./linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "DT Bindings: - Convert all remaining interrupt-controller bindings to DT schema - Convert Rockchip CDN-DP and Freescale TCON, M4IF, TigerP, LDB, PPC PMC, imx-drm, and ftm-quaddec to DT schema - Add bindings for fsl,vf610-pit, fsl,ls1021a-wdt, sgx,vz89te, maxim,max30208, ti,lp8864, and fairphone,fp5-sndcard - Add top-level constraints for renesas,vsp1 and renesas,fcp - Add missing constraint in amlogic,pinctrl-a4 'group' nodes - Adjust the allowed properties for dwc3-xilinx, sony,imx219, pci-iommu, and renesas,dsi - Add EcoNet vendor prefix - Fix the reserved-memory.yaml in fsl,qman-fqd - Drop obsolete numa.txt and cpu-topology.txt which are schemas in dtschema now - Drop Renesas RZ/N1S bindings - Ensure Arm cpu nodes don't allow undocumented properties. Add all the properties which are in use and undocumented. Drop the Mediatek cpufreq binding which is not a binding, but just what DT properties the driver uses. - Add compatibles for Renesas RZ/G3E and RZ/V2N Mali Bifrost GPU - Update documentation on defining child nodes with separate schemas - Add bindings to PSCI MAINTAINERS entry DT core: - Add new functions to simplify driver handling of 'memory-region' properties. Users to be added next cycle. - Simplify of_dma_set_restricted_buffer() to use of_for_each_phandle() - Add missing unlock on error in unittest_data_add()" * tag 'devicetree-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (87 commits) dt-bindings: timer: Add fsl,vf610-pit.yaml dt-bindings: gpu: mali-bifrost: Add compatible for RZ/G3E SoC ASoC: dt-bindings: qcom,sm8250: Add Fairphone 5 sound card dt-bindings: arm/cpus: Allow 2 power-domains entries dt-bindings: usb: dwc3-xilinx: allow dma-coherent media: dt-bindings: sony,imx219: Allow props from video-interface-devices dt-bindings: soundwire: qcom: Document v2.1.0 version of IP block dt-bindings: watchdog: fsl-imx-wdt: add compatible string fsl,ls1021a-wdt dt-bindings: pinctrl: amlogic,pinctrl-a4: Add missing constraint on allowed 'group' node properties dt-bindings: display: rockchip: Convert cdn-dp-rockchip.txt to yaml dt-bindings: display: bridge: renesas,dsi: allow properties from dsi-controller dt-bindings: trivial-devices: Add VZ89TE to trivial media: dt-bindings: renesas,vsp1: add top-level constraints media: dt-bindings: renesas,fcp: add top-level constraints dt-bindings: trivial-devices: Add Maxim max30208 dt-bindings: soc: fsl,qman-fqd: Fix reserved-memory.yaml reference dt-bindings: interrupt-controller: Convert ti,omap-intc-irq to DT schema dt-bindings: interrupt-controller: Convert ti,omap4-wugen-mpu to DT schema dt-bindings: interrupt-controller: Convert ti,keystone-irq to DT schema dt-bindings: interrupt-controller: Convert technologic,ts4800-irqc to DT schema ... --- bf373e4c786bfe989e637195252698f45b157a68 diff --cc Documentation/devicetree/bindings/media/i2c/sony,imx219.yaml index 8b23e5fc6a24,000000000000..38c3759bcd9f mode 100644,000000..100644 --- a/Documentation/devicetree/bindings/media/i2c/sony,imx219.yaml +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx219.yaml @@@ -1,109 -1,0 +1,112 @@@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/sony,imx219.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony 1/4.0-Inch 8Mpixel CMOS Digital Image Sensor + +maintainers: + - Dave Stevenson + +description: |- + The Sony imx219 is a 1/4.0-inch CMOS active pixel digital image sensor + with an active array size of 3280H x 2464V. It is programmable through + I2C interface. The I2C address is fixed to 0x10 as per sensor data sheet. + Image data is sent through MIPI CSI-2, which is configured as either 2 or + 4 data lanes. + ++allOf: ++ - $ref: /schemas/media/video-interface-devices.yaml# ++ +properties: + compatible: + const: sony,imx219 + + reg: + description: I2C device address + maxItems: 1 + + clocks: + maxItems: 1 + + VDIG-supply: + description: + Digital I/O voltage supply, 1.8 volts + + VANA-supply: + description: + Analog voltage supply, 2.8 volts + + VDDL-supply: + description: + Digital core voltage supply, 1.2 volts + + reset-gpios: + maxItems: 1 + description: |- + Reference to the GPIO connected to the xclr pin, if any. + Must be released (set high) after all supplies are applied. + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: |- + The sensor supports either two-lane, or four-lane operation. + If this property is omitted four-lane operation is assumed. + For two-lane operation the property must be set to <1 2>. + items: + - const: 1 + - const: 2 + + clock-noncontinuous: true + link-frequencies: true + + required: + - link-frequencies + +required: + - compatible + - reg + - clocks + - VANA-supply + - VDIG-supply + - VDDL-supply + - port + - additionalProperties: false ++unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + imx219: sensor@10 { + compatible = "sony,imx219"; + reg = <0x10>; + clocks = <&imx219_clk>; + VANA-supply = <&imx219_vana>; /* 2.8v */ + VDIG-supply = <&imx219_vdig>; /* 1.8v */ + VDDL-supply = <&imx219_vddl>; /* 1.2v */ + + port { + imx219_0: endpoint { + remote-endpoint = <&csi1_ep>; + data-lanes = <1 2>; + clock-noncontinuous; + link-frequencies = /bits/ 64 <456000000>; + }; + }; + }; + }; + +... diff --cc Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml index 53d00ca643b3,ff77ad6d4d8c..0543c526b783 --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml @@@ -83,10 -84,12 +83,8 @@@ properties const: canaan,k210-spi - description: Renesas RZ/N1 SPI Controller items: - - enum: - - renesas,r9a06g032-spi # RZ/N1D - - renesas,r9a06g033-spi # RZ/N1S + - const: renesas,r9a06g032-spi # RZ/N1D - const: renesas,rzn1-spi # RZ/N1 - - description: T-HEAD TH1520 SoC SPI Controller - items: - - const: thead,th1520-spi - - const: snps,dw-apb-ssi reg: minItems: 1 diff --cc MAINTAINERS index 33df6052744e,afa33c2cb395..ee57fc5d48f8 --- a/MAINTAINERS +++ b/MAINTAINERS @@@ -3478,7 -3428,7 +3478,8 @@@ M: Krzysztof Kozlowski