From: Uwe Kleine-König Date: Fri, 9 Jul 2021 10:11:10 +0000 (+0200) Subject: iio: adc: ti-ads7950: Ensure CS is deasserted after reading channels X-Git-Tag: microblaze-v5.16~295^2^2~5 X-Git-Url: http://git.monstr.eu/?a=commitdiff_plain;h=9898cb24e454602beb6e17bacf9f97b26c85c955;p=linux-2.6-microblaze.git iio: adc: ti-ads7950: Ensure CS is deasserted after reading channels The ADS7950 requires that CS is deasserted after each SPI word. Before commit e2540da86ef8 ("iio: adc: ti-ads7950: use SPI_CS_WORD to reduce CPU usage") the driver used a message with one spi transfer per channel where each but the last one had .cs_change set to enforce a CS toggle. This was wrongly translated into a message with a single transfer and .cs_change set which results in a CS toggle after each word but the last which corrupts the first adc conversion of all readouts after the first readout. Fixes: e2540da86ef8 ("iio: adc: ti-ads7950: use SPI_CS_WORD to reduce CPU usage") Signed-off-by: Uwe Kleine-König Reviewed-by: David Lechner Tested-by: David Lechner Cc: Link: https://lore.kernel.org/r/20210709101110.1814294-1-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron --- diff --git a/drivers/iio/adc/ti-ads7950.c b/drivers/iio/adc/ti-ads7950.c index 2383eacada87..a2b83f0bd526 100644 --- a/drivers/iio/adc/ti-ads7950.c +++ b/drivers/iio/adc/ti-ads7950.c @@ -568,7 +568,6 @@ static int ti_ads7950_probe(struct spi_device *spi) st->ring_xfer.tx_buf = &st->tx_buf[0]; st->ring_xfer.rx_buf = &st->rx_buf[0]; /* len will be set later */ - st->ring_xfer.cs_change = true; spi_message_add_tail(&st->ring_xfer, &st->ring_msg);