From: Hans de Goede Date: Wed, 25 Oct 2023 14:35:10 +0000 (+0200) Subject: ASoC: Intel: bytcr_wm5102: Add BYT_WM5102_SSP2 quirk X-Git-Tag: microblaze-v6.8~13^2~9^2~6^2~3 X-Git-Url: http://git.monstr.eu/?a=commitdiff_plain;h=95504218c688d286fb6bfd5f4dd394b74c80832f;p=linux-2.6-microblaze.git ASoC: Intel: bytcr_wm5102: Add BYT_WM5102_SSP2 quirk Add the standard intel board file quirk mechanism also used in many other intel board drivers and add a BYT_WM5102_SSP2 quirk setting for designs using SSP2 instead of SSP0. And enable the new BYT_WM5102_SSP2 quirk on Cherry Trail devices since those always use SSP2. The logging of the quirks uses dev_info_once() because probe() may run multiple times because of snd_soc_register_card() returning -EPROBE_DEFER. Acked-by: Pierre-Louis Bossart Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20231025143513.291753-2-hdegoede@redhat.com Signed-off-by: Mark Brown --- diff --git a/sound/soc/intel/boards/bytcr_wm5102.c b/sound/soc/intel/boards/bytcr_wm5102.c index fd7d5fdfd3fd..932a5523b682 100644 --- a/sound/soc/intel/boards/bytcr_wm5102.c +++ b/sound/soc/intel/boards/bytcr_wm5102.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -37,6 +38,21 @@ struct byt_wm5102_private { struct gpio_desc *spkvdd_en_gpio; }; +/* Bits 0-15 are reserved for things like an input-map */ +#define BYT_WM5102_SSP2 BIT(16) + +static unsigned long quirk; + +static int quirk_override = -1; +module_param_named(quirk, quirk_override, int, 0444); +MODULE_PARM_DESC(quirk, "Board-specific quirk override"); + +static void log_quirks(struct device *dev) +{ + if (quirk & BYT_WM5102_SSP2) + dev_info_once(dev, "quirk SSP2 enabled"); +} + static int byt_wm5102_spkvdd_power_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { @@ -166,14 +182,24 @@ static const struct snd_soc_dapm_route byt_wm5102_audio_map[] = { {"Headset Mic", NULL, "MICBIAS1"}, {"Headset Mic", NULL, "MICBIAS2"}, {"IN1L", NULL, "Headset Mic"}, +}; +static const struct snd_soc_dapm_route bytcr_wm5102_ssp0_map[] = { {"AIF1 Playback", NULL, "ssp0 Tx"}, {"ssp0 Tx", NULL, "modem_out"}, - {"modem_in", NULL, "ssp0 Rx"}, {"ssp0 Rx", NULL, "AIF1 Capture"}, }; +static const struct snd_soc_dapm_route bytcr_wm5102_ssp2_map[] = { + {"AIF1 Playback", NULL, "ssp2 Tx"}, + {"ssp2 Tx", NULL, "codec_out0"}, + {"ssp2 Tx", NULL, "codec_out1"}, + {"codec_in0", NULL, "ssp2 Rx"}, + {"codec_in1", NULL, "ssp2 Rx"}, + {"ssp2 Rx", NULL, "AIF1 Capture"}, +}; + static const struct snd_kcontrol_new byt_wm5102_controls[] = { SOC_DAPM_PIN_SWITCH("Headphone"), SOC_DAPM_PIN_SWITCH("Headset Mic"), @@ -202,7 +228,8 @@ static int byt_wm5102_init(struct snd_soc_pcm_runtime *runtime) struct snd_soc_card *card = runtime->card; struct byt_wm5102_private *priv = snd_soc_card_get_drvdata(card); struct snd_soc_component *component = snd_soc_rtd_to_codec(runtime, 0)->component; - int ret, jack_type; + const struct snd_soc_dapm_route *custom_map = NULL; + int ret, jack_type, num_routes = 0; card->dapm.idle_bias_off = true; @@ -213,6 +240,17 @@ static int byt_wm5102_init(struct snd_soc_pcm_runtime *runtime) return ret; } + if (quirk & BYT_WM5102_SSP2) { + custom_map = bytcr_wm5102_ssp2_map; + num_routes = ARRAY_SIZE(bytcr_wm5102_ssp2_map); + } else { + custom_map = bytcr_wm5102_ssp0_map; + num_routes = ARRAY_SIZE(bytcr_wm5102_ssp0_map); + } + ret = snd_soc_dapm_add_routes(&card->dapm, custom_map, num_routes); + if (ret) + return ret; + /* * The firmware might enable the clock at boot (this information * may or may not be reflected in the enable clock register). @@ -253,7 +291,7 @@ static int byt_wm5102_codec_fixup(struct snd_soc_pcm_runtime *rtd, SNDRV_PCM_HW_PARAM_RATE); struct snd_interval *channels = hw_param_interval(params, SNDRV_PCM_HW_PARAM_CHANNELS); - int ret; + int ret, bits; /* The DSP will convert the FE rate to 48k, stereo */ rate->min = 48000; @@ -261,8 +299,15 @@ static int byt_wm5102_codec_fixup(struct snd_soc_pcm_runtime *rtd, channels->min = 2; channels->max = 2; - /* set SSP0 to 16-bit */ - params_set_format(params, SNDRV_PCM_FORMAT_S16_LE); + if (quirk & BYT_WM5102_SSP2) { + /* set SSP2 to 24-bit */ + params_set_format(params, SNDRV_PCM_FORMAT_S24_LE); + bits = 24; + } else { + /* set SSP0 to 16-bit */ + params_set_format(params, SNDRV_PCM_FORMAT_S16_LE); + bits = 16; + } /* * Default mode for SSP configuration is TDM 4 slot, override config @@ -278,7 +323,7 @@ static int byt_wm5102_codec_fixup(struct snd_soc_pcm_runtime *rtd, return ret; } - ret = snd_soc_dai_set_tdm_slot(snd_soc_rtd_to_cpu(rtd, 0), 0x3, 0x3, 2, 16); + ret = snd_soc_dai_set_tdm_slot(snd_soc_rtd_to_cpu(rtd, 0), 0x3, 0x3, 2, bits); if (ret) { dev_err(rtd->dev, "Error setting I2S config: %d\n", ret); return ret; @@ -345,12 +390,9 @@ static struct snd_soc_dai_link byt_wm5102_dais[] = { /* back ends */ { /* - * This must be named SSP2-Codec even though this machine driver - * always uses SSP0. Most machine drivers support both and dynamically - * update the dailink to point to SSP0 or SSP2, while keeping the name - * as "SSP2-Codec". The SOF tplg files hardcode the "SSP2-Codec" even - * in the byt-foo-ssp0.tplg versions because the other machine-drivers - * use "SSP2-Codec" even when SSP0 is used. + * This dailink is updated dynamically to point to SSP0 or SSP2. + * Yet its name is always kept as "SSP2-Codec" because the SOF + * tplg files hardcode "SSP2-Codec" even in byt-foo-ssp0.tplg. */ .name = "SSP2-Codec", .id = 0, @@ -393,8 +435,9 @@ static int snd_byt_wm5102_mc_probe(struct platform_device *pdev) const char *platform_name; struct acpi_device *adev; struct device *codec_dev; + int dai_index = 0; bool sof_parent; - int ret; + int i, ret; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) @@ -441,6 +484,26 @@ static int snd_byt_wm5102_mc_probe(struct platform_device *pdev) return dev_err_probe(dev, ret, "getting spkvdd-GPIO\n"); } + if (soc_intel_is_cht()) { + /* On CHT default to SSP2 */ + quirk = BYT_WM5102_SSP2; + } + if (quirk_override != -1) { + dev_info_once(dev, "Overriding quirk 0x%lx => 0x%x\n", + quirk, quirk_override); + quirk = quirk_override; + } + log_quirks(dev); + + /* find index of codec dai */ + for (i = 0; i < ARRAY_SIZE(byt_wm5102_dais); i++) { + if (!strcmp(byt_wm5102_dais[i].codecs->name, + "wm5102-codec")) { + dai_index = i; + break; + } + } + /* override platform name, if required */ byt_wm5102_card.dev = dev; platform_name = mach->mach_params.platform; @@ -448,6 +511,10 @@ static int snd_byt_wm5102_mc_probe(struct platform_device *pdev) if (ret) goto out_put_gpio; + /* override SSP port, if required */ + if (quirk & BYT_WM5102_SSP2) + byt_wm5102_dais[dai_index].cpus->dai_name = "ssp2-port"; + /* set card and driver name and pm-ops */ sof_parent = snd_soc_acpi_sof_parent(dev); if (sof_parent) {