From: Vikas Gupta <vikas.gupta@broadcom.com>
Date: Wed, 7 Jun 2023 07:54:07 +0000 (-0700)
Subject: bnxt_en: Skip firmware fatal error recovery if chip is not accessible
X-Git-Tag: microblaze-v6.6~340^2^2~2
X-Git-Url: http://git.monstr.eu/?a=commitdiff_plain;h=83474a9b252ab23e6003865c2775024344cb9c09;p=linux-2.6-microblaze.git

bnxt_en: Skip firmware fatal error recovery if chip is not accessible

Driver starts firmware fatal error recovery by detecting
heartbeat failure or fw reset count register changing.  But
these checks are not reliable if the device is not accessible.
This can happen while DPC (Downstream Port containment) is in
progress.  Skip firmware fatal recovery if pci_device_is_present()
returns false.

Fixes: acfb50e4e773 ("bnxt_en: Add FW fatal devlink_health_reporter.")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
---

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index b3fa840cb71f..546eb5d22b7a 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -11602,6 +11602,7 @@ static void bnxt_tx_timeout(struct net_device *dev, unsigned int txqueue)
 static void bnxt_fw_health_check(struct bnxt *bp)
 {
 	struct bnxt_fw_health *fw_health = bp->fw_health;
+	struct pci_dev *pdev = bp->pdev;
 	u32 val;
 
 	if (!fw_health->enabled || test_bit(BNXT_STATE_IN_FW_RESET, &bp->state))
@@ -11615,7 +11616,7 @@ static void bnxt_fw_health_check(struct bnxt *bp)
 	}
 
 	val = bnxt_fw_health_readl(bp, BNXT_FW_HEARTBEAT_REG);
-	if (val == fw_health->last_fw_heartbeat) {
+	if (val == fw_health->last_fw_heartbeat && pci_device_is_present(pdev)) {
 		fw_health->arrests++;
 		goto fw_reset;
 	}
@@ -11623,7 +11624,7 @@ static void bnxt_fw_health_check(struct bnxt *bp)
 	fw_health->last_fw_heartbeat = val;
 
 	val = bnxt_fw_health_readl(bp, BNXT_FW_RESET_CNT_REG);
-	if (val != fw_health->last_fw_reset_cnt) {
+	if (val != fw_health->last_fw_reset_cnt && pci_device_is_present(pdev)) {
 		fw_health->discoveries++;
 		goto fw_reset;
 	}