From: Vladimir Oltean <vladimir.oltean@nxp.com>
Date: Mon, 2 Mar 2020 00:19:57 +0000 (+0200)
Subject: spi: spi-fsl-dspi: Support SPI software timestamping in all non-DMA modes
X-Git-Tag: microblaze-v5.10~311^2~42^2~49^2~2
X-Git-Url: http://git.monstr.eu/?a=commitdiff_plain;h=63669902f74a6133c209fc03109becf5a2141284;p=linux-2.6-microblaze.git

spi: spi-fsl-dspi: Support SPI software timestamping in all non-DMA modes

There's no reason to keep this .ptp_sts_supported property explicitly in
devtype_data, since it can be deduced from the operating mode alone.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-Id: <20200302001958.11105-6-olteanv@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---

diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index d21cc5cdc8a4..c26a42f8ecbc 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -122,7 +122,6 @@ enum dspi_trans_mode {
 struct fsl_dspi_devtype_data {
 	enum dspi_trans_mode	trans_mode;
 	u8			max_clock_factor;
-	bool			ptp_sts_supported;
 	bool			xspi_mode;
 	int			fifo_size;
 	int			dma_bufsize;
@@ -150,48 +149,41 @@ static const struct fsl_dspi_devtype_data devtype_data[] = {
 	[LS1021A] = {
 		.trans_mode		= DSPI_TCFQ_MODE,
 		.max_clock_factor	= 8,
-		.ptp_sts_supported	= true,
 		.xspi_mode		= true,
 		.fifo_size		= 4,
 	},
 	[LS1012A] = {
 		.trans_mode		= DSPI_TCFQ_MODE,
 		.max_clock_factor	= 8,
-		.ptp_sts_supported	= true,
 		.xspi_mode		= true,
 		.fifo_size		= 16,
 	},
 	[LS1043A] = {
 		.trans_mode		= DSPI_TCFQ_MODE,
 		.max_clock_factor	= 8,
-		.ptp_sts_supported	= true,
 		.xspi_mode		= true,
 		.fifo_size		= 16,
 	},
 	[LS1046A] = {
 		.trans_mode		= DSPI_TCFQ_MODE,
 		.max_clock_factor	= 8,
-		.ptp_sts_supported	= true,
 		.xspi_mode		= true,
 		.fifo_size		= 16,
 	},
 	[LS2080A] = {
 		.trans_mode		= DSPI_TCFQ_MODE,
 		.max_clock_factor	= 8,
-		.ptp_sts_supported	= true,
 		.xspi_mode		= true,
 		.fifo_size		= 4,
 	},
 	[LS2085A] = {
 		.trans_mode		= DSPI_TCFQ_MODE,
 		.max_clock_factor	= 8,
-		.ptp_sts_supported	= true,
 		.fifo_size		= 4,
 	},
 	[LX2160A] = {
 		.trans_mode		= DSPI_TCFQ_MODE,
 		.max_clock_factor	= 8,
-		.ptp_sts_supported	= true,
 		.xspi_mode		= true,
 		.fifo_size		= 4,
 	},
@@ -1246,7 +1238,8 @@ poll_mode:
 	ctlr->max_speed_hz =
 		clk_get_rate(dspi->clk) / dspi->devtype_data->max_clock_factor;
 
-	ctlr->ptp_sts_supported = dspi->devtype_data->ptp_sts_supported;
+	if (dspi->devtype_data->trans_mode != DSPI_DMA_MODE)
+		ctlr->ptp_sts_supported = true;
 
 	platform_set_drvdata(pdev, ctlr);