From: Christian Eggers Date: Fri, 9 Oct 2020 11:03:20 +0000 (+0200) Subject: i2c: imx: Don't generate STOP condition if arbitration has been lost X-Git-Tag: microblaze-v5.12~255^2~2 X-Git-Url: http://git.monstr.eu/?a=commitdiff_plain;h=61e6fe59ede155881a622f5901551b1cc8748f6a;p=linux-2.6-microblaze.git i2c: imx: Don't generate STOP condition if arbitration has been lost If arbitration is lost, the master automatically changes to slave mode. I2SR_IBB may or may not be reset by hardware. Raising a STOP condition by resetting I2CR_MSTA has no effect and will not clear I2SR_IBB. So calling i2c_imx_bus_busy() is not required and would busy-wait until timeout. Signed-off-by: Christian Eggers Tested (not extensively) on Vybrid VF500 (Toradex VF50): Tested-by: Krzysztof Kozlowski Acked-by: Oleksij Rempel Cc: stable@vger.kernel.org # Requires trivial backporting, simple remove # the 3rd argument from the calls to # i2c_imx_bus_busy(). Signed-off-by: Wolfram Sang --- diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index a2abae124342..e6f8d6e45a15 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -615,6 +615,8 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx, bool atomic) /* Stop I2C transaction */ dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR); + if (!(temp & I2CR_MSTA)) + i2c_imx->stopped = 1; temp &= ~(I2CR_MSTA | I2CR_MTX); if (i2c_imx->dma) temp &= ~I2CR_DMAEN; @@ -778,9 +780,12 @@ static int i2c_imx_dma_read(struct imx_i2c_struct *i2c_imx, */ dev_dbg(dev, "<%s> clear MSTA\n", __func__); temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR); + if (!(temp & I2CR_MSTA)) + i2c_imx->stopped = 1; temp &= ~(I2CR_MSTA | I2CR_MTX); imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); - i2c_imx_bus_busy(i2c_imx, 0, false); + if (!i2c_imx->stopped) + i2c_imx_bus_busy(i2c_imx, 0, false); } else { /* * For i2c master receiver repeat restart operation like: @@ -905,9 +910,12 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, dev_dbg(&i2c_imx->adapter.dev, "<%s> clear MSTA\n", __func__); temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR); + if (!(temp & I2CR_MSTA)) + i2c_imx->stopped = 1; temp &= ~(I2CR_MSTA | I2CR_MTX); imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); - i2c_imx_bus_busy(i2c_imx, 0, atomic); + if (!i2c_imx->stopped) + i2c_imx_bus_busy(i2c_imx, 0, atomic); } else { /* * For i2c master receiver repeat restart operation like: