From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Wed, 1 Oct 2025 20:14:48 +0000 (-0700)
Subject: Merge tag 'pinctrl-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw... 
X-Git-Url: http://git.monstr.eu/?a=commitdiff_plain;h=5fb024931949f3475260c84a0e4b0997af9c5530;p=linux-2.6-microblaze.git

Merge tag 'pinctrl-v6.18-1' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "We have GPIO awareness in the pin control core and an interesting
  AAEON driver.

  Core changes:

   - Allow pins to be identified/marked as GPIO mode with a special
     callback.

     The pin controller core is now "aware" if a pin is in GPIO mode if
     the callback is implemented in the driver, and can thus be marked
     as "strict", i.e. disallowing simultaneous use of a line as GPIO
     and another function such as I2C.

     This is enabled in the Qualcomm TLMM driver and also implemeted
     from day 1 in the new Broadcom STB driver

   - Rename the pin config option PIN_CONFIG_OUTPUT to PIN_CONFIG_LEVEL
     to better describe what the config is doing, as well as making it
     more intuitive what shall be returned when reading this property

  New drivers:

   - Qualcomm SDM660 LPASS LPI TLMM pin controller subdriver

   - Qualcomm Glymur family pin controller driver

   - Broadcom STB family pin controller driver

   - Tegra186 pin controller driver

   - AAEON UP pin controller support.

     This is some special pin controller that works as an external
     advanced line MUX and amplifier for signals from an Intel SoC. A
     cooperative effort with the GPIO maintainer was needed to reach a
     solution where we reuse code from the GPIO aggregator/forwarder
     driver

   - Renesas RZ/T2H and RZ/N2H pin controller support

   - Axis ARTPEC-8 subdriver for the Samsung pin controller driver

  Improvements:

   - Output enable (OEN) support in the Renesas RZG2L driver

   - Properly support bias pull up/down in the pinctrl-single driver

   - Move over all GPIO portions using generic MMIO GPIO to the new
     generic GPIO chip management which has a nice and separate API

   - Proper DT bindings for some older Broadcom SoCs

   - External GPIO (EGPIO) support in the Qualcomm SM8250

  Deleted code:

   - Dropped the now unused Samsung S3C24xx drivers"

* tag 'pinctrl-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (75 commits)
  pinctrl: use more common syntax for compound literals
  pinctrl: Simplify printks with pOF format
  pinctrl: qcom: Add SDM660 LPASS LPI TLMM
  dt-bindings: pinctrl: qcom: Add SDM660 LPI pinctrl
  pinctrl: qcom: lpass-lpi: Add ability to use custom pin offsets
  pinctrl: qcom: Add glymur pinctrl driver
  dt-bindings: pinctrl: qcom: Add Glymur pinctrl
  pinctrl: qcom: sm8250: Add egpio support
  pinctrl: generic: rename PIN_CONFIG_OUTPUT to LEVEL
  pinctrl: keembay: fix double free in keembay_build_functions()
  pinctrl: spacemit: fix typo in PRI_TDI pin name
  pinctrl: eswin: Fix regulator error check and Kconfig dependency
  pinctrl: bcm: Add STB family pin controller driver
  dt-bindings: pinctrl: Add support for Broadcom STB pin controller
  pinctrl: qcom: make the pinmuxing strict
  pinctrl: qcom: mark the `gpio` and `egpio` pins function as non-strict functions
  pinctrl: qcom: add infrastructure for marking pin functions as GPIOs
  pinctrl: allow to mark pin functions as requestable GPIOs
  pinctrl: qcom: use generic pin function helpers
  pinctrl: make struct pinfunction a pointer in struct function_desc
  ...
---

5fb024931949f3475260c84a0e4b0997af9c5530
diff --cc drivers/pinctrl/nuvoton/pinctrl-wpcm450.c
index c575949e42e6,ef569525e9c6..d624a4d302a8
--- a/drivers/pinctrl/nuvoton/pinctrl-wpcm450.c
+++ b/drivers/pinctrl/nuvoton/pinctrl-wpcm450.c
@@@ -1061,10 -1061,10 +1061,10 @@@ static int wpcm450_gpio_register(struc
  			set = pctrl->gpio_base + bank->dataout;
  			dirout = pctrl->gpio_base + bank->cfg0;
  		} else {
 -			flags = BGPIOF_NO_OUTPUT;
 +			flags = GPIO_GENERIC_NO_OUTPUT;
  		}
  
- 		config = (typeof(config)){
+ 		config = (struct gpio_generic_chip_config) {
  			.dev = dev,
  			.sz = 4,
  			.dat = dat,