From: Mikhail Rudenko Date: Thu, 17 Oct 2024 18:37:28 +0000 (+0300) Subject: regulator: rk808: Add apply_bit for BUCK3 on RK809 X-Git-Tag: microblaze-v6.16~750^2 X-Git-Url: http://git.monstr.eu/?a=commitdiff_plain;h=5e53e4a66bc7430dd2d11c18a86410e3a38d2940;p=linux-2.6-microblaze.git regulator: rk808: Add apply_bit for BUCK3 on RK809 Currently, RK809's BUCK3 regulator is modelled in the driver as a configurable regulator with 0.5-2.4V voltage range. But the voltage setting is not actually applied, because when bit 6 of PMIC_POWER_CONFIG register is set to 0 (default), BUCK3 output voltage is determined by the external feedback resistor. Fix this, by setting bit 6 when voltage selection is set. Existing users which do not specify voltage constraints in their device trees will not be affected by this change, since no voltage setting is applied in those cases, and bit 6 is not enabled. Signed-off-by: Mikhail Rudenko Link: https://patch.msgid.link/20241017-rk809-dcdc3-v1-1-e3c3de92f39c@gmail.com Signed-off-by: Mark Brown --- diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c index 14b60abd6afc..01a8d0487918 100644 --- a/drivers/regulator/rk808-regulator.c +++ b/drivers/regulator/rk808-regulator.c @@ -1379,6 +1379,8 @@ static const struct regulator_desc rk809_reg[] = { .n_linear_ranges = ARRAY_SIZE(rk817_buck1_voltage_ranges), .vsel_reg = RK817_BUCK3_ON_VSEL_REG, .vsel_mask = RK817_BUCK_VSEL_MASK, + .apply_reg = RK817_POWER_CONFIG, + .apply_bit = RK817_BUCK3_FB_RES_INTER, .enable_reg = RK817_POWER_EN_REG(0), .enable_mask = ENABLE_MASK(RK817_ID_DCDC3), .enable_val = ENABLE_MASK(RK817_ID_DCDC3),