From: Jarkko Nikula Date: Fri, 15 Mar 2019 10:56:49 +0000 (+0200) Subject: i2c: i801: Add support for Intel Comet Lake X-Git-Tag: microblaze-v5.4-rc1~1046^2~5 X-Git-Url: http://git.monstr.eu/?a=commitdiff_plain;h=5cd1c56c42beb6d228cc8d4373fdc5f5ec78a5ad;p=linux-2.6-microblaze.git i2c: i801: Add support for Intel Comet Lake Add PCI ID for Intel Comet Lake PCH. Signed-off-by: Jarkko Nikula Reviewed-by: Jean Delvare Signed-off-by: Wolfram Sang --- diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 index d1ee484a787d..ee9984f35868 100644 --- a/Documentation/i2c/busses/i2c-i801 +++ b/Documentation/i2c/busses/i2c-i801 @@ -36,6 +36,7 @@ Supported adapters: * Intel Cannon Lake (PCH) * Intel Cedar Fork (PCH) * Intel Ice Lake (PCH) + * Intel Comet Lake (PCH) Datasheets: Publicly available at the Intel website On Intel Patsburg and later chipsets, both the normal host SMBus controller diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index f2c681971201..f8979abb9a19 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -131,6 +131,7 @@ config I2C_I801 Cannon Lake (PCH) Cedar Fork (PCH) Ice Lake (PCH) + Comet Lake (PCH) This driver can also be built as a module. If so, the module will be called i2c-i801. diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index c91e145ef5a5..679c6c41f64b 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -71,6 +71,7 @@ * Cannon Lake-LP (PCH) 0x9da3 32 hard yes yes yes * Cedar Fork (PCH) 0x18df 32 hard yes yes yes * Ice Lake-LP (PCH) 0x34a3 32 hard yes yes yes + * Comet Lake (PCH) 0x02a3 32 hard yes yes yes * * Features supported by this driver: * Software PEC no @@ -240,6 +241,7 @@ #define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS 0xa223 #define PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS 0xa2a3 #define PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS 0xa323 +#define PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS 0x02a3 struct i801_mux_config { char *gpio_chip; @@ -1038,6 +1040,7 @@ static const struct pci_device_id i801_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS) }, { 0, } }; @@ -1534,6 +1537,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) case PCI_DEVICE_ID_INTEL_DNV_SMBUS: case PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS: case PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS: + case PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS: priv->features |= FEATURE_I2C_BLOCK_READ; priv->features |= FEATURE_IRQ; priv->features |= FEATURE_SMBUS_PEC;