From: Fabio Estevam Date: Wed, 17 Aug 2016 15:41:08 +0000 (-0300) Subject: can: flexcan: fix resume function X-Git-Tag: microblaze-4.10-rc1~366^2~11^2 X-Git-Url: http://git.monstr.eu/?a=commitdiff_plain;h=4de349e786a3a2d51bd02d56f3de151bbc3c3df9;p=linux-2.6-microblaze.git can: flexcan: fix resume function On a imx6ul-pico board the following error is seen during system suspend: dpm_run_callback(): platform_pm_resume+0x0/0x54 returns -110 PM: Device 2090000.flexcan failed to resume: error -110 The reason for this suspend error is because when the CAN interface is not active the clocks are disabled and then flexcan_chip_enable() will always fail due to a timeout error. In order to fix this issue, only call flexcan_chip_enable/disable() when the CAN interface is active. Based on a patch from Dong Aisheng in the NXP kernel. Signed-off-by: Fabio Estevam Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 41c0fc9f3b14..16f7cadda5c3 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -1268,11 +1268,10 @@ static int __maybe_unused flexcan_suspend(struct device *device) struct flexcan_priv *priv = netdev_priv(dev); int err; - err = flexcan_chip_disable(priv); - if (err) - return err; - if (netif_running(dev)) { + err = flexcan_chip_disable(priv); + if (err) + return err; netif_stop_queue(dev); netif_device_detach(dev); } @@ -1285,13 +1284,17 @@ static int __maybe_unused flexcan_resume(struct device *device) { struct net_device *dev = dev_get_drvdata(device); struct flexcan_priv *priv = netdev_priv(dev); + int err; priv->can.state = CAN_STATE_ERROR_ACTIVE; if (netif_running(dev)) { netif_device_attach(dev); netif_start_queue(dev); + err = flexcan_chip_enable(priv); + if (err) + return err; } - return flexcan_chip_enable(priv); + return 0; } static SIMPLE_DEV_PM_OPS(flexcan_pm_ops, flexcan_suspend, flexcan_resume);