From: Jonas Gorski Date: Tue, 29 Apr 2025 20:17:01 +0000 (+0200) Subject: net: dsa: b53: keep CPU port always tagged again X-Git-Url: http://git.monstr.eu/?a=commitdiff_plain;h=425f11d4cc9bd9e97e6825d9abb2c51a068ca7b5;p=linux-2.6-microblaze.git net: dsa: b53: keep CPU port always tagged again The Broadcom management header does not carry the original VLAN tag state information, just the ingress port, so for untagged frames we do not know from which VLAN they originated. Therefore keep the CPU port always tagged except for VLAN 0. Fixes the following setup: $ ip link add br0 type bridge vlan_filtering 1 $ ip link set sw1p1 master br0 $ bridge vlan add dev br0 pvid untagged self $ ip link add sw1p2.10 link sw1p2 type vlan id 10 Where VID 10 would stay untagged on the CPU port. Fixes: 2c32a3d3c233 ("net: dsa: b53: Do not force CPU to be always tagged") Signed-off-by: Jonas Gorski Tested-by: Florian Fainelli Reviewed-by: Florian Fainelli Link: https://patch.msgid.link/20250429201710.330937-3-jonas.gorski@gmail.com Signed-off-by: Jakub Kicinski --- diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c index 62866165ad03..9d4fb54b4ced 100644 --- a/drivers/net/dsa/b53/b53_common.c +++ b/drivers/net/dsa/b53/b53_common.c @@ -1135,6 +1135,11 @@ static int b53_setup(struct dsa_switch *ds) */ ds->untag_bridge_pvid = dev->tag_protocol == DSA_TAG_PROTO_NONE; + /* The switch does not tell us the original VLAN for untagged + * packets, so keep the CPU port always tagged. + */ + ds->untag_vlan_aware_bridge_pvid = true; + ret = b53_reset_switch(dev); if (ret) { dev_err(ds->dev, "failed to reset switch\n"); @@ -1545,6 +1550,9 @@ int b53_vlan_add(struct dsa_switch *ds, int port, if (vlan->vid == 0 && vlan->vid == b53_default_pvid(dev)) untagged = true; + if (vlan->vid > 0 && dsa_is_cpu_port(ds, port)) + untagged = false; + vl->members |= BIT(port); if (untagged && !b53_vlan_port_needs_forced_tagged(ds, port)) vl->untag |= BIT(port);