From: Sergio Perez <sergio@pereznus.es>
Date: Mon, 24 Mar 2025 13:59:19 +0000 (+0100)
Subject: dt-bindings: iio: light: bh1750: Add reset-gpios property
X-Git-Url: http://git.monstr.eu/?a=commitdiff_plain;h=3e09eb53df47127cdcbf26fc41d24cd564d5d57c;p=linux-2.6-microblaze.git

dt-bindings: iio: light: bh1750: Add reset-gpios property

Some BH1750 sensors require a hardware reset via GPIO before they can
be properly detected on the I2C bus. Add a new reset-gpios property
to the binding to support this functionality.

The reset-gpios property allows specifying a GPIO that will be toggled
during driver initialization to reset the sensor.

Signed-off-by: Sergio Perez <sergio@pereznus.es>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250324135920.6802-1-sergio@pereznus.es
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---

diff --git a/Documentation/devicetree/bindings/iio/light/bh1750.yaml b/Documentation/devicetree/bindings/iio/light/bh1750.yaml
index 1a88b3c253d5..9df81c271411 100644
--- a/Documentation/devicetree/bindings/iio/light/bh1750.yaml
+++ b/Documentation/devicetree/bindings/iio/light/bh1750.yaml
@@ -24,6 +24,10 @@ properties:
   reg:
     maxItems: 1
 
+  reset-gpios:
+    description: GPIO connected to the DVI reset pin (active low)
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -32,6 +36,7 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     i2c {
       #address-cells = <1>;
       #size-cells = <0>;
@@ -39,6 +44,7 @@ examples:
       light-sensor@23 {
         compatible = "rohm,bh1750";
         reg = <0x23>;
+        reset-gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
       };
     };