From: Russell King Date: Tue, 21 Jun 2022 09:37:40 +0000 (+0100) Subject: net: dsa: mv88e6xxx: get rid of SPEED_MAX setting X-Git-Tag: microblaze-v6.1~144^2~303^2 X-Git-Url: http://git.monstr.eu/?a=commitdiff_plain;h=3c783b83bd0f;p=linux-2.6-microblaze.git net: dsa: mv88e6xxx: get rid of SPEED_MAX setting Currently, all the device specific speed setting functions convert SPEED_MAX to the actual speed of the port. Rather than having each of the mv88e6xxx chip specifics handling SPEED_MAX, derive it from the mac_capabilities instead. This is only needed for CPU and DSA ports, so move the logic up into mv88e6xxx_setup_port() - which allows us to kill off all users of SPEED_MAX throughout the driver. Signed-off-by: Russell King Signed-off-by: Jakub Kicinski --- diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 0b49d243e00b..37b649501500 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -449,9 +449,6 @@ static int mv88e6xxx_port_setup_mac(struct mv88e6xxx_chip *chip, int port, goto restore_link; } - if (speed == SPEED_MAX && chip->info->ops->port_max_speed_mode) - mode = chip->info->ops->port_max_speed_mode(port); - if (chip->info->ops->port_set_pause) { err = chip->info->ops->port_set_pause(chip, port, pause); if (err) @@ -3280,28 +3277,51 @@ static int mv88e6xxx_setup_port(struct mv88e6xxx_chip *chip, int port) { struct device_node *phy_handle = NULL; struct dsa_switch *ds = chip->ds; + phy_interface_t mode; struct dsa_port *dp; - int tx_amp; + int tx_amp, speed; int err; u16 reg; chip->ports[port].chip = chip; chip->ports[port].port = port; + dp = dsa_to_port(ds, port); + /* MAC Forcing register: don't force link, speed, duplex or flow control * state to any particular values on physical ports, but force the CPU * port and all DSA ports to their maximum bandwidth and full duplex. */ - if (dsa_is_cpu_port(ds, port) || dsa_is_dsa_port(ds, port)) + if (dsa_is_cpu_port(ds, port) || dsa_is_dsa_port(ds, port)) { + unsigned long caps = dp->pl_config.mac_capabilities; + + if (chip->info->ops->port_max_speed_mode) + mode = chip->info->ops->port_max_speed_mode(port); + else + mode = PHY_INTERFACE_MODE_NA; + + if (caps & MAC_10000FD) + speed = SPEED_10000; + else if (caps & MAC_5000FD) + speed = SPEED_5000; + else if (caps & MAC_2500FD) + speed = SPEED_2500; + else if (caps & MAC_1000) + speed = SPEED_1000; + else if (caps & MAC_100) + speed = SPEED_100; + else + speed = SPEED_10; + err = mv88e6xxx_port_setup_mac(chip, port, LINK_FORCED_UP, - SPEED_MAX, DUPLEX_FULL, - PAUSE_OFF, - PHY_INTERFACE_MODE_NA); - else + speed, DUPLEX_FULL, + PAUSE_OFF, mode); + } else { err = mv88e6xxx_port_setup_mac(chip, port, LINK_UNFORCED, SPEED_UNFORCED, DUPLEX_UNFORCED, PAUSE_ON, PHY_INTERFACE_MODE_NA); + } if (err) return err; @@ -3473,7 +3493,6 @@ static int mv88e6xxx_setup_port(struct mv88e6xxx_chip *chip, int port) } if (chip->info->ops->serdes_set_tx_amplitude) { - dp = dsa_to_port(ds, port); if (dp) phy_handle = of_parse_phandle(dp->dn, "phy-handle", 0); diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h index 5e03cfe50156..e693154cf803 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.h +++ b/drivers/net/dsa/mv88e6xxx/chip.h @@ -488,14 +488,13 @@ struct mv88e6xxx_ops { int (*port_set_pause)(struct mv88e6xxx_chip *chip, int port, int pause); -#define SPEED_MAX INT_MAX #define SPEED_UNFORCED -2 #define DUPLEX_UNFORCED -2 /* Port's MAC speed (in Mbps) and MAC duplex mode * * Depending on the chip, 10, 100, 200, 1000, 2500, 10000 are valid. - * Use SPEED_UNFORCED for normal detection, SPEED_MAX for max value. + * Use SPEED_UNFORCED for normal detection. * * Use DUPLEX_HALF or DUPLEX_FULL to force half or full duplex, * or DUPLEX_UNFORCED for normal duplex detection. diff --git a/drivers/net/dsa/mv88e6xxx/port.c b/drivers/net/dsa/mv88e6xxx/port.c index 3cdc985b79e2..90c55f23b7c9 100644 --- a/drivers/net/dsa/mv88e6xxx/port.c +++ b/drivers/net/dsa/mv88e6xxx/port.c @@ -298,9 +298,6 @@ static int mv88e6xxx_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int mv88e6185_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port, int speed, int duplex) { - if (speed == SPEED_MAX) - speed = 1000; - if (speed == 200 || speed > 1000) return -EOPNOTSUPP; @@ -312,9 +309,6 @@ int mv88e6185_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port, int mv88e6250_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port, int speed, int duplex) { - if (speed == SPEED_MAX) - speed = 100; - if (speed > 100) return -EOPNOTSUPP; @@ -326,9 +320,6 @@ int mv88e6250_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port, int mv88e6341_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port, int speed, int duplex) { - if (speed == SPEED_MAX) - speed = port < 5 ? 1000 : 2500; - if (speed > 2500) return -EOPNOTSUPP; @@ -354,9 +345,6 @@ phy_interface_t mv88e6341_port_max_speed_mode(int port) int mv88e6352_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port, int speed, int duplex) { - if (speed == SPEED_MAX) - speed = 1000; - if (speed > 1000) return -EOPNOTSUPP; @@ -371,9 +359,6 @@ int mv88e6352_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port, int mv88e6390_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port, int speed, int duplex) { - if (speed == SPEED_MAX) - speed = port < 9 ? 1000 : 2500; - if (speed > 2500) return -EOPNOTSUPP; @@ -399,9 +384,6 @@ phy_interface_t mv88e6390_port_max_speed_mode(int port) int mv88e6390x_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port, int speed, int duplex) { - if (speed == SPEED_MAX) - speed = port < 9 ? 1000 : 10000; - if (speed == 200 && port != 0) return -EOPNOTSUPP; @@ -430,9 +412,6 @@ int mv88e6393x_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port, u16 reg, ctrl; int err; - if (speed == SPEED_MAX) - speed = (port > 0 && port < 9) ? 1000 : 10000; - if (speed == 200 && port != 0) return -EOPNOTSUPP;