From: Jonas Gorski Date: Fri, 4 Oct 2024 08:47:21 +0000 (+0200) Subject: net: dsa: b53: fix jumbo frames on 10/100 ports X-Git-Tag: microblaze-v6.16~913^2~24^2 X-Git-Url: http://git.monstr.eu/?a=commitdiff_plain;h=2f3dcd0d39affe5b9ba1c351ce0e270c8bdd5109;p=linux-2.6-microblaze.git net: dsa: b53: fix jumbo frames on 10/100 ports All modern chips support and need the 10_100 bit set for supporting jumbo frames on 10/100 ports, so instead of enabling it only for 583XX enable it for everything except bcm63xx, where the bit is writeable, but does nothing. Tested on BCM53115, where jumbo frames were dropped at 10/100 speeds without the bit set. Fixes: 6ae5834b983a ("net: dsa: b53: add MTU configuration support") Signed-off-by: Jonas Gorski Reviewed-by: Florian Fainelli Signed-off-by: Paolo Abeni --- diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c index 5b83f9b6cdac..c39cb119e760 100644 --- a/drivers/net/dsa/b53/b53_common.c +++ b/drivers/net/dsa/b53/b53_common.c @@ -2264,7 +2264,7 @@ static int b53_change_mtu(struct dsa_switch *ds, int port, int mtu) return 0; enable_jumbo = (mtu > ETH_DATA_LEN); - allow_10_100 = (dev->chip_id == BCM583XX_DEVICE_ID); + allow_10_100 = !is63xx(dev); return b53_set_jumbo(dev, enable_jumbo, allow_10_100); }