From: Matti Vaittinen <mazziesaccount@gmail.com>
Date: Mon, 28 Apr 2025 07:02:17 +0000 (+0300)
Subject: iio: ti-adc128s052: Drop variable vref
X-Git-Url: http://git.monstr.eu/?a=commitdiff_plain;h=157517b5e88d87721c90687538f643cceeb886f5;p=linux-2.6-microblaze.git

iio: ti-adc128s052: Drop variable vref

According to Jonathan, variable reference voltages are very rare. It is
unlikely it is needed, and supporting it makes the code a bit more
complex.

Simplify the driver and drop the variable vref support.

Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/59106e24332743a7f9eb0b13ad6a2f5595ab485a.1745823530.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---

diff --git a/drivers/iio/adc/ti-adc128s052.c b/drivers/iio/adc/ti-adc128s052.c
index d4721ad90f2c..1b46a8155803 100644
--- a/drivers/iio/adc/ti-adc128s052.c
+++ b/drivers/iio/adc/ti-adc128s052.c
@@ -29,13 +29,12 @@ struct adc128_configuration {
 struct adc128 {
 	struct spi_device *spi;
 
-	struct regulator *reg;
 	/*
 	 * Serialize the SPI 'write-channel + read data' accesses and protect
 	 * the shared buffer.
 	 */
 	struct mutex lock;
-
+	int vref_mv;
 	union {
 		__be16 buffer16;
 		u8 buffer[2];
@@ -81,11 +80,7 @@ static int adc128_read_raw(struct iio_dev *indio_dev,
 
 	case IIO_CHAN_INFO_SCALE:
 
-		ret = regulator_get_voltage(adc->reg);
-		if (ret < 0)
-			return ret;
-
-		*val = ret / 1000;
+		*val = adc->vref_mv;
 		*val2 = 12;
 		return IIO_VAL_FRACTIONAL_LOG2;
 
@@ -155,11 +150,6 @@ static const struct iio_info adc128_info = {
 	.read_raw = adc128_read_raw,
 };
 
-static void adc128_disable_regulator(void *reg)
-{
-	regulator_disable(reg);
-}
-
 static int adc128_probe(struct spi_device *spi)
 {
 	const struct adc128_configuration *config;
@@ -183,17 +173,14 @@ static int adc128_probe(struct spi_device *spi)
 	indio_dev->channels = config->channels;
 	indio_dev->num_channels = config->num_channels;
 
-	adc->reg = devm_regulator_get(&spi->dev, config->refname);
-	if (IS_ERR(adc->reg))
-		return PTR_ERR(adc->reg);
-
-	ret = regulator_enable(adc->reg);
+	ret = devm_regulator_get_enable_read_voltage(&spi->dev,
+						     config->refname);
 	if (ret < 0)
-		return ret;
-	ret = devm_add_action_or_reset(&spi->dev, adc128_disable_regulator,
-				       adc->reg);
-	if (ret)
-		return ret;
+		return dev_err_probe(&spi->dev, ret,
+				     "failed to read '%s' voltage",
+				     config->refname);
+
+	adc->vref_mv = ret / 1000;
 
 	if (config->num_other_regulators) {
 		ret = devm_regulator_bulk_get_enable(&spi->dev,