From: Yixing Liu Date: Wed, 31 Mar 2021 08:18:33 +0000 (+0800) Subject: net: toshiba: fix the trailing format of some block comments X-Git-Tag: microblaze-v5.14~96^2~275^2~1 X-Git-Url: http://git.monstr.eu/?a=commitdiff_plain;h=142c1d2ed96604ec09bbc4076d2a8d09271850d3;p=linux-2.6-microblaze.git net: toshiba: fix the trailing format of some block comments Use a trailling */ on a separate line for block comments. Signed-off-by: Yixing Liu Signed-off-by: Weihang Li Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/toshiba/spider_net.c b/drivers/net/ethernet/toshiba/spider_net.c index d5a75ef7e3ca..226a76633e65 100644 --- a/drivers/net/ethernet/toshiba/spider_net.c +++ b/drivers/net/ethernet/toshiba/spider_net.c @@ -146,7 +146,8 @@ spider_net_read_phy(struct net_device *netdev, int mii_id, int reg) /* we don't use semaphores to wait for an SPIDER_NET_GPROPCMPINT * interrupt, as we poll for the completion of the read operation - * in spider_net_read_phy. Should take about 50 us */ + * in spider_net_read_phy. Should take about 50 us + */ do { readvalue = spider_net_read_reg(card, SPIDER_NET_GPCROPCMD); } while (readvalue & SPIDER_NET_GPREXEC); @@ -387,7 +388,8 @@ spider_net_prepare_rx_descr(struct spider_net_card *card, (~(SPIDER_NET_RXBUF_ALIGN - 1)); /* and we need to have it 128 byte aligned, therefore we allocate a - * bit more */ + * bit more + */ /* allocate an skb */ descr->skb = netdev_alloc_skb(card->netdev, bufsize + SPIDER_NET_RXBUF_ALIGN - 1); @@ -488,7 +490,8 @@ spider_net_refill_rx_chain(struct spider_net_card *card) /* one context doing the refill (and a second context seeing that * and omitting it) is ok. If called by NAPI, we'll be called again * as spider_net_decode_one_descr is called several times. If some - * interrupt calls us, the NAPI is about to clean up anyway. */ + * interrupt calls us, the NAPI is about to clean up anyway. + */ if (!spin_trylock_irqsave(&chain->lock, flags)) return; @@ -523,14 +526,16 @@ spider_net_alloc_rx_skbs(struct spider_net_card *card) /* Put at least one buffer into the chain. if this fails, * we've got a problem. If not, spider_net_refill_rx_chain - * will do the rest at the end of this function. */ + * will do the rest at the end of this function. + */ if (spider_net_prepare_rx_descr(card, chain->head)) goto error; else chain->head = chain->head->next; /* This will allocate the rest of the rx buffers; - * if not, it's business as usual later on. */ + * if not, it's business as usual later on. + */ spider_net_refill_rx_chain(card); spider_net_enable_rxdmac(card); return 0; @@ -706,7 +711,8 @@ spider_net_set_low_watermark(struct spider_net_card *card) int i; /* Measure the length of the queue. Measurement does not - * need to be precise -- does not need a lock. */ + * need to be precise -- does not need a lock. + */ while (descr != card->tx_chain.head) { status = descr->hwdescr->dmac_cmd_status & SPIDER_NET_DESCR_NOT_IN_USE; if (status == SPIDER_NET_DESCR_NOT_IN_USE) @@ -786,7 +792,8 @@ spider_net_release_tx_chain(struct spider_net_card *card, int brutal) /* fallthrough, if we release the descriptors * brutally (then we don't care about - * SPIDER_NET_DESCR_CARDOWNED) */ + * SPIDER_NET_DESCR_CARDOWNED) + */ fallthrough; case SPIDER_NET_DESCR_RESPONSE_ERROR: @@ -948,7 +955,8 @@ spider_net_pass_skb_up(struct spider_net_descr *descr, skb_put(skb, hwdescr->valid_size); /* the card seems to add 2 bytes of junk in front - * of the ethernet frame */ + * of the ethernet frame + */ #define SPIDER_MISALIGN 2 skb_pull(skb, SPIDER_MISALIGN); skb->protocol = eth_type_trans(skb, netdev); @@ -1382,7 +1390,8 @@ spider_net_handle_error_irq(struct spider_net_card *card, u32 status_reg, /* PHY read operation completed */ /* we don't use semaphores, as we poll for the completion * of the read operation in spider_net_read_phy. Should take - * about 50 us */ + * about 50 us + */ show_error = 0; break; case SPIDER_NET_GPWFFINT: @@ -1450,7 +1459,8 @@ spider_net_handle_error_irq(struct spider_net_card *card, u32 status_reg, { case SPIDER_NET_GTMFLLINT: /* TX RAM full may happen on a usual case. - * Logging is not needed. */ + * Logging is not needed. + */ show_error = 0; break; case SPIDER_NET_GRFDFLLINT: @@ -1694,7 +1704,8 @@ spider_net_enable_card(struct spider_net_card *card) { int i; /* the following array consists of (register),(value) pairs - * that are set in this function. A register of 0 ends the list */ + * that are set in this function. A register of 0 ends the list + */ u32 regs[][2] = { { SPIDER_NET_GRESUMINTNUM, 0 }, { SPIDER_NET_GREINTNUM, 0 }, @@ -1757,7 +1768,8 @@ spider_net_enable_card(struct spider_net_card *card) spider_net_write_reg(card, SPIDER_NET_ECMODE, SPIDER_NET_ECMODE_VALUE); /* set chain tail address for RX chains and - * enable DMA */ + * enable DMA + */ spider_net_enable_rxchtails(card); spider_net_enable_rxdmac(card); @@ -1995,7 +2007,8 @@ static void spider_net_link_phy(struct timer_list *t) case BCM54XX_UNKNOWN: /* copper, fiber with and without failed, - * retry from beginning */ + * retry from beginning + */ spider_net_setup_aneg(card); card->medium = BCM54XX_COPPER; break; @@ -2263,7 +2276,8 @@ spider_net_setup_netdev(struct spider_net_card *card) netdev->features |= NETIF_F_RXCSUM; netdev->features |= NETIF_F_IP_CSUM | NETIF_F_LLTX; /* some time: NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX | - * NETIF_F_HW_VLAN_CTAG_FILTER */ + * NETIF_F_HW_VLAN_CTAG_FILTER + */ /* MTU range: 64 - 2294 */ netdev->min_mtu = SPIDER_NET_MIN_MTU; diff --git a/drivers/net/ethernet/toshiba/tc35815.c b/drivers/net/ethernet/toshiba/tc35815.c index 7a6e5ff8e5d4..fedb2bf69261 100644 --- a/drivers/net/ethernet/toshiba/tc35815.c +++ b/drivers/net/ethernet/toshiba/tc35815.c @@ -1914,7 +1914,8 @@ tc35815_set_multicast_list(struct net_device *dev) if (dev->flags & IFF_PROMISC) { /* With some (all?) 100MHalf HUB, controller will hang - * if we enabled promiscuous mode before linkup... */ + * if we enabled promiscuous mode before linkup... + */ struct tc35815_local *lp = netdev_priv(dev); if (!lp->link)