From: Geert Uytterhoeven Date: Thu, 1 Jun 2017 10:27:00 +0000 (+0200) Subject: ARM: dts: armadillo800eva: Split LCD mux and gpio X-Git-Tag: microblaze-4.14-rc3~612^2~3^2 X-Git-Url: http://git.monstr.eu/?a=commitdiff_plain;h=13132b3f44d3600983aceb7e9920b8ebb55a7cf8;p=linux-2.6-microblaze.git ARM: dts: armadillo800eva: Split LCD mux and gpio Configuration of the lcd0 pinmux group and GPIO hog for the external GPIO mux are done using a single device node, causing the "output-high" property to be applied to both. This will fail for the pinmux group, but doesn't cause any harm, as the failure is ignored silently. However, after "pinctrl: sh-pfc: propagate errors on group config", the failure will become fatal, leading to a broken display: sh-pfc e6050000.pin-controller: pin_config_group_set op failed for group 102 sh-pfc e6050000.pin-controller: Error applying setting, reverse things back sh-pfc e6050000.pin-controller: failed to select default state Move the GPIO hog to its own node to fix this. Fixes: ffd2f9a5afb730b9 ("ARM: shmobile: armadillo800eva dts: Add pinctrl and gpio-hog for lcdc0") Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index 7885075428bb..1788e186a512 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -266,7 +266,9 @@ lcd0_pins: lcd0 { groups = "lcd0_data24_0", "lcd0_lclk_1", "lcd0_sync"; function = "lcd0"; + }; + lcd0_mux { /* DBGMD/LCDC0/FSIA MUX */ gpio-hog; gpios = <176 0>;