From: Heiko Stuebner Date: Mon, 13 Sep 2021 22:49:23 +0000 (+0200) Subject: gpio/rockchip: extended debounce support is only available on v2 X-Git-Tag: microblaze-v5.18~887^2~1 X-Git-Url: http://git.monstr.eu/?a=commitdiff_plain;h=0f562b7de99085935d76b00c41ab5caa26ff5c74;p=linux-2.6-microblaze.git gpio/rockchip: extended debounce support is only available on v2 The gpio driver runs into issues on v1 gpio blocks, as the db_clk and the whole extended debounce support is only ever defined on v2. So checking for the IS_ERR on the db_clk is not enough, as it will be NULL on v1. Fix this by adding the needed condition for v2 first before checking the existence of the db_clk. This caused my rk3288-veyron-pinky to enter a reboot loop when it tried to enable the power-key as adc-key device. Fixes: 3bcbd1a85b68 ("gpio/rockchip: support next version gpio controller") Signed-off-by: Heiko Stuebner Reviewed-by: Linus Walleij Signed-off-by: Bartosz Golaszewski --- diff --git a/drivers/gpio/gpio-rockchip.c b/drivers/gpio/gpio-rockchip.c index 036b2d959503..16d9bf7188e3 100644 --- a/drivers/gpio/gpio-rockchip.c +++ b/drivers/gpio/gpio-rockchip.c @@ -195,7 +195,7 @@ static int rockchip_gpio_set_debounce(struct gpio_chip *gc, unsigned int cur_div_reg; u64 div; - if (!IS_ERR(bank->db_clk)) { + if (bank->gpio_type == GPIO_TYPE_V2 && !IS_ERR(bank->db_clk)) { div_debounce_support = true; freq = clk_get_rate(bank->db_clk); max_debounce = (GENMASK(23, 0) + 1) * 2 * 1000000 / freq;