rtlwifi: rtl8192cu: Change firmware upload to use block writes
authorLarry Finger <Larry.Finger@lwfinger.net>
Thu, 17 Nov 2011 18:14:43 +0000 (12:14 -0600)
committerJohn W. Linville <linville@tuxdriver.com>
Mon, 21 Nov 2011 21:20:45 +0000 (16:20 -0500)
Driver rtl8192cu writes the firmware with 32-bit asynchronous writes. This
design is OK for USB 2.0 adapters, but the current implementation of
xhcu-hcd has a limited ring size, which is exceeded. By converting to
synchronous block writes, this error is avoided.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c
drivers/net/wireless/rtlwifi/rtl8192c/fw_common.h
drivers/net/wireless/rtlwifi/rtl8192cu/mac.c
drivers/net/wireless/rtlwifi/usb.c
drivers/net/wireless/rtlwifi/wifi.h

index 49a064b..ebb73a2 100644 (file)
@@ -72,6 +72,34 @@ static void _rtl92c_enable_fw_download(struct ieee80211_hw *hw, bool enable)
        }
 }
 
+static void rtl_block_fw_writeN(struct ieee80211_hw *hw, const u8 *buffer,
+                               u32 size)
+{
+       struct rtl_priv *rtlpriv = rtl_priv(hw);
+       u32 blockSize = REALTEK_USB_VENQT_MAX_BUF_SIZE - 20;
+       u8 *bufferPtr = (u8 *) buffer;
+       u32 i, offset, blockCount, remainSize;
+
+       blockCount = size / blockSize;
+       remainSize = size % blockSize;
+
+       for (i = 0; i < blockCount; i++) {
+               offset = i * blockSize;
+               rtlpriv->io.writeN_sync(rtlpriv,
+                                       (FW_8192C_START_ADDRESS + offset),
+                                       (void *)(bufferPtr + offset),
+                                       blockSize);
+       }
+
+       if (remainSize) {
+               offset = blockCount * blockSize;
+               rtlpriv->io.writeN_sync(rtlpriv,
+                                       (FW_8192C_START_ADDRESS + offset),
+                                       (void *)(bufferPtr + offset),
+                                       remainSize);
+       }
+}
+
 static void _rtl92c_fw_block_write(struct ieee80211_hw *hw,
                                   const u8 *buffer, u32 size)
 {
@@ -81,6 +109,10 @@ static void _rtl92c_fw_block_write(struct ieee80211_hw *hw,
        u32 *pu4BytePtr = (u32 *) buffer;
        u32 i, offset, blockCount, remainSize;
 
+       if (rtlpriv->io.writeN_sync) {
+               rtl_block_fw_writeN(hw, buffer, size);
+               return;
+       }
        blockCount = size / blockSize;
        remainSize = size % blockSize;
 
index fcc4032..c55c054 100644 (file)
@@ -94,5 +94,6 @@ void rtl92c_firmware_selfreset(struct ieee80211_hw *hw);
 void rtl92c_set_fw_pwrmode_cmd(struct ieee80211_hw *hw, u8 mode);
 void rtl92c_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool b_dl_finished);
 void rtl92c_set_fw_joinbss_report_cmd(struct ieee80211_hw *hw, u8 mstatus);
+void usb_writeN_async(struct rtl_priv *rtlpriv, u32 addr, void *data, u16 len);
 
 #endif
index 060a06f..9e0c8fc 100644 (file)
@@ -84,6 +84,7 @@ void rtl92c_read_chip_version(struct ieee80211_hw *hw)
                }
        }
        rtlhal->version  = (enum version_8192c)chip_version;
+       pr_info("rtl8192cu: Chip version 0x%x\n", chip_version);
        switch (rtlhal->version) {
        case VERSION_NORMAL_TSMC_CHIP_92C_1T2R:
                RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
index 209105c..a461822 100644 (file)
@@ -40,7 +40,6 @@
 #define REALTEK_USB_VENQT_CMD_REQ              0x05
 #define        REALTEK_USB_VENQT_CMD_IDX               0x00
 
-#define REALTEK_USB_VENQT_MAX_BUF_SIZE         254
 #define MAX_USBCTRL_VENDORREQ_TIMES            10
 
 static void usbctrl_async_callback(struct urb *urb)
@@ -203,6 +202,30 @@ static void _usb_write32_async(struct rtl_priv *rtlpriv, u32 addr, u32 val)
        _usb_write_async(to_usb_device(dev), addr, val, 4);
 }
 
+static void _usb_writeN_sync(struct rtl_priv *rtlpriv, u32 addr, void *data,
+                            u16 len)
+{
+       struct device *dev = rtlpriv->io.dev;
+       struct usb_device *udev = to_usb_device(dev);
+       u8 request = REALTEK_USB_VENQT_CMD_REQ;
+       u8 reqtype =  REALTEK_USB_VENQT_WRITE;
+       u16 wvalue;
+       u16 index = REALTEK_USB_VENQT_CMD_IDX;
+       int pipe = usb_sndctrlpipe(udev, 0); /* write_out */
+       u8 *buffer;
+       dma_addr_t dma_addr;
+
+       wvalue = (u16)(addr&0x0000ffff);
+       buffer = usb_alloc_coherent(udev, (size_t)len, GFP_ATOMIC, &dma_addr);
+       if (!buffer)
+               return;
+       memcpy(buffer, data, len);
+       usb_control_msg(udev, pipe, request, reqtype, wvalue,
+                       index, buffer, len, 50);
+
+       usb_free_coherent(udev, (size_t)len, buffer, dma_addr);
+}
+
 static void _rtl_usb_io_handler_init(struct device *dev,
                                     struct ieee80211_hw *hw)
 {
@@ -216,6 +239,7 @@ static void _rtl_usb_io_handler_init(struct device *dev,
        rtlpriv->io.read8_sync          = _usb_read8_sync;
        rtlpriv->io.read16_sync         = _usb_read16_sync;
        rtlpriv->io.read32_sync         = _usb_read32_sync;
+       rtlpriv->io.writeN_sync         = _usb_writeN_sync;
 }
 
 static void _rtl_usb_io_handler_release(struct ieee80211_hw *hw)
index 713c7dd..f3c132b 100644 (file)
@@ -63,6 +63,7 @@
 #define AC_MAX                                 4
 #define QOS_QUEUE_NUM                          4
 #define RTL_MAC80211_NUM_QUEUE                 5
+#define REALTEK_USB_VENQT_MAX_BUF_SIZE         254
 
 #define QBSS_LOAD_SIZE                         5
 #define MAX_WMMELE_LENGTH                      64
@@ -943,8 +944,10 @@ struct rtl_io {
        unsigned long pci_base_addr;    /*device I/O address */
 
        void (*write8_async) (struct rtl_priv *rtlpriv, u32 addr, u8 val);
-       void (*write16_async) (struct rtl_priv *rtlpriv, u32 addr, __le16 val);
-       void (*write32_async) (struct rtl_priv *rtlpriv, u32 addr, __le32 val);
+       void (*write16_async) (struct rtl_priv *rtlpriv, u32 addr, u16 val);
+       void (*write32_async) (struct rtl_priv *rtlpriv, u32 addr, u32 val);
+       void (*writeN_sync) (struct rtl_priv *rtlpriv, u32 addr, void *buf,
+                            u16 len);
 
        u8(*read8_sync) (struct rtl_priv *rtlpriv, u32 addr);
        u16(*read16_sync) (struct rtl_priv *rtlpriv, u32 addr);