--- /dev/null
- ret = devm_spi_register_controller(dev, master);
+ // SPDX-License-Identifier: GPL-2.0-only
+ /*
+ * Designware SPI core controller driver (refer pxa2xx_spi.c)
+ *
+ * Copyright (c) 2009, Intel Corporation.
+ */
+
+ #include <linux/dma-mapping.h>
+ #include <linux/interrupt.h>
+ #include <linux/module.h>
+ #include <linux/highmem.h>
+ #include <linux/delay.h>
+ #include <linux/slab.h>
+ #include <linux/spi/spi.h>
+
+ #include "spi-dw.h"
+
+ #ifdef CONFIG_DEBUG_FS
+ #include <linux/debugfs.h>
+ #endif
+
+ /* Slave spi_dev related */
+ struct chip_data {
+ u8 tmode; /* TR/TO/RO/EEPROM */
+ u8 type; /* SPI/SSP/MicroWire */
+
+ u16 clk_div; /* baud rate divider */
+ u32 speed_hz; /* baud rate */
+ };
+
+ #ifdef CONFIG_DEBUG_FS
+
+ #define DW_SPI_DBGFS_REG(_name, _off) \
+ { \
+ .name = _name, \
+ .offset = _off, \
+ }
+
+ static const struct debugfs_reg32 dw_spi_dbgfs_regs[] = {
+ DW_SPI_DBGFS_REG("CTRLR0", DW_SPI_CTRLR0),
+ DW_SPI_DBGFS_REG("CTRLR1", DW_SPI_CTRLR1),
+ DW_SPI_DBGFS_REG("SSIENR", DW_SPI_SSIENR),
+ DW_SPI_DBGFS_REG("SER", DW_SPI_SER),
+ DW_SPI_DBGFS_REG("BAUDR", DW_SPI_BAUDR),
+ DW_SPI_DBGFS_REG("TXFTLR", DW_SPI_TXFTLR),
+ DW_SPI_DBGFS_REG("RXFTLR", DW_SPI_RXFTLR),
+ DW_SPI_DBGFS_REG("TXFLR", DW_SPI_TXFLR),
+ DW_SPI_DBGFS_REG("RXFLR", DW_SPI_RXFLR),
+ DW_SPI_DBGFS_REG("SR", DW_SPI_SR),
+ DW_SPI_DBGFS_REG("IMR", DW_SPI_IMR),
+ DW_SPI_DBGFS_REG("ISR", DW_SPI_ISR),
+ DW_SPI_DBGFS_REG("DMACR", DW_SPI_DMACR),
+ DW_SPI_DBGFS_REG("DMATDLR", DW_SPI_DMATDLR),
+ DW_SPI_DBGFS_REG("DMARDLR", DW_SPI_DMARDLR),
+ };
+
+ static int dw_spi_debugfs_init(struct dw_spi *dws)
+ {
+ char name[32];
+
+ snprintf(name, 32, "dw_spi%d", dws->master->bus_num);
+ dws->debugfs = debugfs_create_dir(name, NULL);
+ if (!dws->debugfs)
+ return -ENOMEM;
+
+ dws->regset.regs = dw_spi_dbgfs_regs;
+ dws->regset.nregs = ARRAY_SIZE(dw_spi_dbgfs_regs);
+ dws->regset.base = dws->regs;
+ debugfs_create_regset32("registers", 0400, dws->debugfs, &dws->regset);
+
+ return 0;
+ }
+
+ static void dw_spi_debugfs_remove(struct dw_spi *dws)
+ {
+ debugfs_remove_recursive(dws->debugfs);
+ }
+
+ #else
+ static inline int dw_spi_debugfs_init(struct dw_spi *dws)
+ {
+ return 0;
+ }
+
+ static inline void dw_spi_debugfs_remove(struct dw_spi *dws)
+ {
+ }
+ #endif /* CONFIG_DEBUG_FS */
+
+ void dw_spi_set_cs(struct spi_device *spi, bool enable)
+ {
+ struct dw_spi *dws = spi_controller_get_devdata(spi->controller);
+ bool cs_high = !!(spi->mode & SPI_CS_HIGH);
+
+ /*
+ * DW SPI controller demands any native CS being set in order to
+ * proceed with data transfer. So in order to activate the SPI
+ * communications we must set a corresponding bit in the Slave
+ * Enable register no matter whether the SPI core is configured to
+ * support active-high or active-low CS level.
+ */
+ if (cs_high == enable)
+ dw_writel(dws, DW_SPI_SER, BIT(spi->chip_select));
+ else if (dws->cs_override)
+ dw_writel(dws, DW_SPI_SER, 0);
+ }
+ EXPORT_SYMBOL_GPL(dw_spi_set_cs);
+
+ /* Return the max entries we can fill into tx fifo */
+ static inline u32 tx_max(struct dw_spi *dws)
+ {
+ u32 tx_left, tx_room, rxtx_gap;
+
+ tx_left = (dws->tx_end - dws->tx) / dws->n_bytes;
+ tx_room = dws->fifo_len - dw_readl(dws, DW_SPI_TXFLR);
+
+ /*
+ * Another concern is about the tx/rx mismatch, we
+ * though to use (dws->fifo_len - rxflr - txflr) as
+ * one maximum value for tx, but it doesn't cover the
+ * data which is out of tx/rx fifo and inside the
+ * shift registers. So a control from sw point of
+ * view is taken.
+ */
+ rxtx_gap = ((dws->rx_end - dws->rx) - (dws->tx_end - dws->tx))
+ / dws->n_bytes;
+
+ return min3(tx_left, tx_room, (u32) (dws->fifo_len - rxtx_gap));
+ }
+
+ /* Return the max entries we should read out of rx fifo */
+ static inline u32 rx_max(struct dw_spi *dws)
+ {
+ u32 rx_left = (dws->rx_end - dws->rx) / dws->n_bytes;
+
+ return min_t(u32, rx_left, dw_readl(dws, DW_SPI_RXFLR));
+ }
+
+ static void dw_writer(struct dw_spi *dws)
+ {
+ u32 max;
+ u16 txw = 0;
+
+ spin_lock(&dws->buf_lock);
+ max = tx_max(dws);
+ while (max--) {
+ /* Set the tx word if the transfer's original "tx" is not null */
+ if (dws->tx_end - dws->len) {
+ if (dws->n_bytes == 1)
+ txw = *(u8 *)(dws->tx);
+ else
+ txw = *(u16 *)(dws->tx);
+ }
+ dw_write_io_reg(dws, DW_SPI_DR, txw);
+ dws->tx += dws->n_bytes;
+ }
+ spin_unlock(&dws->buf_lock);
+ }
+
+ static void dw_reader(struct dw_spi *dws)
+ {
+ u32 max;
+ u16 rxw;
+
+ spin_lock(&dws->buf_lock);
+ max = rx_max(dws);
+ while (max--) {
+ rxw = dw_read_io_reg(dws, DW_SPI_DR);
+ /* Care rx only if the transfer's original "rx" is not null */
+ if (dws->rx_end - dws->len) {
+ if (dws->n_bytes == 1)
+ *(u8 *)(dws->rx) = rxw;
+ else
+ *(u16 *)(dws->rx) = rxw;
+ }
+ dws->rx += dws->n_bytes;
+ }
+ spin_unlock(&dws->buf_lock);
+ }
+
+ static void int_error_stop(struct dw_spi *dws, const char *msg)
+ {
+ spi_reset_chip(dws);
+
+ dev_err(&dws->master->dev, "%s\n", msg);
+ dws->master->cur_msg->status = -EIO;
+ spi_finalize_current_transfer(dws->master);
+ }
+
+ static irqreturn_t interrupt_transfer(struct dw_spi *dws)
+ {
+ u16 irq_status = dw_readl(dws, DW_SPI_ISR);
+
+ /* Error handling */
+ if (irq_status & (SPI_INT_TXOI | SPI_INT_RXOI | SPI_INT_RXUI)) {
+ dw_readl(dws, DW_SPI_ICR);
+ int_error_stop(dws, "interrupt_transfer: fifo overrun/underrun");
+ return IRQ_HANDLED;
+ }
+
+ dw_reader(dws);
+ if (dws->rx_end == dws->rx) {
+ spi_mask_intr(dws, SPI_INT_TXEI);
+ spi_finalize_current_transfer(dws->master);
+ return IRQ_HANDLED;
+ }
+ if (irq_status & SPI_INT_TXEI) {
+ spi_mask_intr(dws, SPI_INT_TXEI);
+ dw_writer(dws);
+ /* Enable TX irq always, it will be disabled when RX finished */
+ spi_umask_intr(dws, SPI_INT_TXEI);
+ }
+
+ return IRQ_HANDLED;
+ }
+
+ static irqreturn_t dw_spi_irq(int irq, void *dev_id)
+ {
+ struct spi_controller *master = dev_id;
+ struct dw_spi *dws = spi_controller_get_devdata(master);
+ u16 irq_status = dw_readl(dws, DW_SPI_ISR) & 0x3f;
+
+ if (!irq_status)
+ return IRQ_NONE;
+
+ if (!master->cur_msg) {
+ spi_mask_intr(dws, SPI_INT_TXEI);
+ return IRQ_HANDLED;
+ }
+
+ return dws->transfer_handler(dws);
+ }
+
+ /* Configure CTRLR0 for DW_apb_ssi */
+ u32 dw_spi_update_cr0(struct spi_controller *master, struct spi_device *spi,
+ struct spi_transfer *transfer)
+ {
+ struct chip_data *chip = spi_get_ctldata(spi);
+ u32 cr0;
+
+ /* Default SPI mode is SCPOL = 0, SCPH = 0 */
+ cr0 = (transfer->bits_per_word - 1)
+ | (chip->type << SPI_FRF_OFFSET)
+ | ((((spi->mode & SPI_CPOL) ? 1 : 0) << SPI_SCOL_OFFSET) |
+ (((spi->mode & SPI_CPHA) ? 1 : 0) << SPI_SCPH_OFFSET) |
+ (((spi->mode & SPI_LOOP) ? 1 : 0) << SPI_SRL_OFFSET))
+ | (chip->tmode << SPI_TMOD_OFFSET);
+
+ return cr0;
+ }
+ EXPORT_SYMBOL_GPL(dw_spi_update_cr0);
+
+ /* Configure CTRLR0 for DWC_ssi */
+ u32 dw_spi_update_cr0_v1_01a(struct spi_controller *master,
+ struct spi_device *spi,
+ struct spi_transfer *transfer)
+ {
+ struct chip_data *chip = spi_get_ctldata(spi);
+ u32 cr0;
+
+ /* CTRLR0[ 4: 0] Data Frame Size */
+ cr0 = (transfer->bits_per_word - 1);
+
+ /* CTRLR0[ 7: 6] Frame Format */
+ cr0 |= chip->type << DWC_SSI_CTRLR0_FRF_OFFSET;
+
+ /*
+ * SPI mode (SCPOL|SCPH)
+ * CTRLR0[ 8] Serial Clock Phase
+ * CTRLR0[ 9] Serial Clock Polarity
+ */
+ cr0 |= ((spi->mode & SPI_CPOL) ? 1 : 0) << DWC_SSI_CTRLR0_SCPOL_OFFSET;
+ cr0 |= ((spi->mode & SPI_CPHA) ? 1 : 0) << DWC_SSI_CTRLR0_SCPH_OFFSET;
+
+ /* CTRLR0[11:10] Transfer Mode */
+ cr0 |= chip->tmode << DWC_SSI_CTRLR0_TMOD_OFFSET;
+
+ /* CTRLR0[13] Shift Register Loop */
+ cr0 |= ((spi->mode & SPI_LOOP) ? 1 : 0) << DWC_SSI_CTRLR0_SRL_OFFSET;
+
+ return cr0;
+ }
+ EXPORT_SYMBOL_GPL(dw_spi_update_cr0_v1_01a);
+
+ static int dw_spi_transfer_one(struct spi_controller *master,
+ struct spi_device *spi, struct spi_transfer *transfer)
+ {
+ struct dw_spi *dws = spi_controller_get_devdata(master);
+ struct chip_data *chip = spi_get_ctldata(spi);
+ unsigned long flags;
+ u8 imask = 0;
+ u16 txlevel = 0;
+ u32 cr0;
+ int ret;
+
+ dws->dma_mapped = 0;
+ spin_lock_irqsave(&dws->buf_lock, flags);
+ dws->tx = (void *)transfer->tx_buf;
+ dws->tx_end = dws->tx + transfer->len;
+ dws->rx = transfer->rx_buf;
+ dws->rx_end = dws->rx + transfer->len;
+ dws->len = transfer->len;
+ spin_unlock_irqrestore(&dws->buf_lock, flags);
+
+ /* Ensure dw->rx and dw->rx_end are visible */
+ smp_mb();
+
+ spi_enable_chip(dws, 0);
+
+ /* Handle per transfer options for bpw and speed */
+ if (transfer->speed_hz != dws->current_freq) {
+ if (transfer->speed_hz != chip->speed_hz) {
+ /* clk_div doesn't support odd number */
+ chip->clk_div = (DIV_ROUND_UP(dws->max_freq, transfer->speed_hz) + 1) & 0xfffe;
+ chip->speed_hz = transfer->speed_hz;
+ }
+ dws->current_freq = transfer->speed_hz;
+ spi_set_clk(dws, chip->clk_div);
+ }
+
+ transfer->effective_speed_hz = dws->max_freq / chip->clk_div;
+ dws->n_bytes = DIV_ROUND_UP(transfer->bits_per_word, BITS_PER_BYTE);
+
+ cr0 = dws->update_cr0(master, spi, transfer);
+ dw_writel(dws, DW_SPI_CTRLR0, cr0);
+
+ /* Check if current transfer is a DMA transaction */
+ if (master->can_dma && master->can_dma(master, spi, transfer))
+ dws->dma_mapped = master->cur_msg_mapped;
+
+ /* For poll mode just disable all interrupts */
+ spi_mask_intr(dws, 0xff);
+
+ /*
+ * Interrupt mode
+ * we only need set the TXEI IRQ, as TX/RX always happen syncronizely
+ */
+ if (dws->dma_mapped) {
+ ret = dws->dma_ops->dma_setup(dws, transfer);
+ if (ret < 0) {
+ spi_enable_chip(dws, 1);
+ return ret;
+ }
+ } else {
+ txlevel = min_t(u16, dws->fifo_len / 2, dws->len / dws->n_bytes);
+ dw_writel(dws, DW_SPI_TXFTLR, txlevel);
+
+ /* Set the interrupt mask */
+ imask |= SPI_INT_TXEI | SPI_INT_TXOI |
+ SPI_INT_RXUI | SPI_INT_RXOI;
+ spi_umask_intr(dws, imask);
+
+ dws->transfer_handler = interrupt_transfer;
+ }
+
+ spi_enable_chip(dws, 1);
+
+ if (dws->dma_mapped)
+ return dws->dma_ops->dma_transfer(dws, transfer);
+
+ return 1;
+ }
+
+ static void dw_spi_handle_err(struct spi_controller *master,
+ struct spi_message *msg)
+ {
+ struct dw_spi *dws = spi_controller_get_devdata(master);
+
+ if (dws->dma_mapped)
+ dws->dma_ops->dma_stop(dws);
+
+ spi_reset_chip(dws);
+ }
+
+ /* This may be called twice for each spi dev */
+ static int dw_spi_setup(struct spi_device *spi)
+ {
+ struct chip_data *chip;
+
+ /* Only alloc on first setup */
+ chip = spi_get_ctldata(spi);
+ if (!chip) {
+ chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+ spi_set_ctldata(spi, chip);
+ }
+
+ chip->tmode = SPI_TMOD_TR;
+
+ return 0;
+ }
+
+ static void dw_spi_cleanup(struct spi_device *spi)
+ {
+ struct chip_data *chip = spi_get_ctldata(spi);
+
+ kfree(chip);
+ spi_set_ctldata(spi, NULL);
+ }
+
+ /* Restart the controller, disable all interrupts, clean rx fifo */
+ static void spi_hw_init(struct device *dev, struct dw_spi *dws)
+ {
+ spi_reset_chip(dws);
+
+ /*
+ * Try to detect the FIFO depth if not set by interface driver,
+ * the depth could be from 2 to 256 from HW spec
+ */
+ if (!dws->fifo_len) {
+ u32 fifo;
+
+ for (fifo = 1; fifo < 256; fifo++) {
+ dw_writel(dws, DW_SPI_TXFTLR, fifo);
+ if (fifo != dw_readl(dws, DW_SPI_TXFTLR))
+ break;
+ }
+ dw_writel(dws, DW_SPI_TXFTLR, 0);
+
+ dws->fifo_len = (fifo == 1) ? 0 : fifo;
+ dev_dbg(dev, "Detected FIFO size: %u bytes\n", dws->fifo_len);
+ }
+
+ /* enable HW fixup for explicit CS deselect for Amazon's alpine chip */
+ if (dws->cs_override)
+ dw_writel(dws, DW_SPI_CS_OVERRIDE, 0xF);
+ }
+
+ int dw_spi_add_host(struct device *dev, struct dw_spi *dws)
+ {
+ struct spi_controller *master;
+ int ret;
+
+ if (!dws)
+ return -EINVAL;
+
+ master = spi_alloc_master(dev, 0);
+ if (!master)
+ return -ENOMEM;
+
+ dws->master = master;
+ dws->type = SSI_MOTO_SPI;
+ dws->dma_addr = (dma_addr_t)(dws->paddr + DW_SPI_DR);
+ spin_lock_init(&dws->buf_lock);
+
+ spi_controller_set_devdata(master, dws);
+
+ ret = request_irq(dws->irq, dw_spi_irq, IRQF_SHARED, dev_name(dev),
+ master);
+ if (ret < 0) {
+ dev_err(dev, "can not get IRQ\n");
+ goto err_free_master;
+ }
+
+ master->use_gpio_descriptors = true;
+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LOOP;
+ master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16);
+ master->bus_num = dws->bus_num;
+ master->num_chipselect = dws->num_cs;
+ master->setup = dw_spi_setup;
+ master->cleanup = dw_spi_cleanup;
+ master->set_cs = dw_spi_set_cs;
+ master->transfer_one = dw_spi_transfer_one;
+ master->handle_err = dw_spi_handle_err;
+ master->max_speed_hz = dws->max_freq;
+ master->dev.of_node = dev->of_node;
+ master->dev.fwnode = dev->fwnode;
+ master->flags = SPI_MASTER_GPIO_SS;
+ master->auto_runtime_pm = true;
+
+ if (dws->set_cs)
+ master->set_cs = dws->set_cs;
+
+ /* Basic HW init */
+ spi_hw_init(dev, dws);
+
+ if (dws->dma_ops && dws->dma_ops->dma_init) {
+ ret = dws->dma_ops->dma_init(dev, dws);
+ if (ret) {
+ dev_warn(dev, "DMA init failed\n");
+ } else {
+ master->can_dma = dws->dma_ops->can_dma;
+ master->flags |= SPI_CONTROLLER_MUST_TX;
+ }
+ }
+
++ ret = spi_register_controller(master);
+ if (ret) {
+ dev_err(&master->dev, "problem registering spi master\n");
+ goto err_dma_exit;
+ }
+
+ dw_spi_debugfs_init(dws);
+ return 0;
+
+ err_dma_exit:
+ if (dws->dma_ops && dws->dma_ops->dma_exit)
+ dws->dma_ops->dma_exit(dws);
+ spi_enable_chip(dws, 0);
+ free_irq(dws->irq, master);
+ err_free_master:
+ spi_controller_put(master);
+ return ret;
+ }
+ EXPORT_SYMBOL_GPL(dw_spi_add_host);
+
+ void dw_spi_remove_host(struct dw_spi *dws)
+ {
+ dw_spi_debugfs_remove(dws);
+
++ spi_unregister_controller(dws->master);
++
+ if (dws->dma_ops && dws->dma_ops->dma_exit)
+ dws->dma_ops->dma_exit(dws);
+
+ spi_shutdown_chip(dws);
+
+ free_irq(dws->irq, dws->master);
+ }
+ EXPORT_SYMBOL_GPL(dw_spi_remove_host);
+
+ int dw_spi_suspend_host(struct dw_spi *dws)
+ {
+ int ret;
+
+ ret = spi_controller_suspend(dws->master);
+ if (ret)
+ return ret;
+
+ spi_shutdown_chip(dws);
+ return 0;
+ }
+ EXPORT_SYMBOL_GPL(dw_spi_suspend_host);
+
+ int dw_spi_resume_host(struct dw_spi *dws)
+ {
+ spi_hw_init(&dws->master->dev, dws);
+ return spi_controller_resume(dws->master);
+ }
+ EXPORT_SYMBOL_GPL(dw_spi_resume_host);
+
+ MODULE_AUTHOR("Feng Tang <feng.tang@intel.com>");
+ MODULE_DESCRIPTION("Driver for DesignWare SPI controller core");
+ MODULE_LICENSE("GPL v2");
projects / linux-2.6-microblaze.git / commitdiff