{ 0x146b, 0x0604, "Bigben Interactive DAIJA Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x1532, 0x0a00, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
{ 0x1532, 0x0a03, "Razer Wildcat", 0, XTYPE_XBOXONE },
+ { 0x1532, 0x0a29, "Razer Wolverine V2", 0, XTYPE_XBOXONE },
{ 0x15e4, 0x3f00, "Power A Mini Pro Elite", 0, XTYPE_XBOX360 },
{ 0x15e4, 0x3f0a, "Xbox Airflo wired controller", 0, XTYPE_XBOX360 },
{ 0x15e4, 0x3f10, "Batarang Xbox 360 controller", 0, XTYPE_XBOX360 },
ps2dev->serio->phys);
}
+#ifdef CONFIG_X86
+static bool atkbd_is_portable_device(void)
+{
+ static const char * const chassis_types[] = {
+ "8", /* Portable */
+ "9", /* Laptop */
+ "10", /* Notebook */
+ "14", /* Sub-Notebook */
+ "31", /* Convertible */
+ "32", /* Detachable */
+ };
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(chassis_types); i++)
+ if (dmi_match(DMI_CHASSIS_TYPE, chassis_types[i]))
+ return true;
+
+ return false;
+}
+
+/*
+ * On many modern laptops ATKBD_CMD_GETID may cause problems, on these laptops
+ * the controller is always in translated mode. In this mode mice/touchpads will
+ * not work. So in this case simply assume a keyboard is connected to avoid
+ * confusing some laptop keyboards.
+ *
+ * Skipping ATKBD_CMD_GETID ends up using a fake keyboard id. Using a fake id is
+ * ok in translated mode, only atkbd_select_set() checks atkbd->id and in
+ * translated mode that is a no-op.
+ */
+static bool atkbd_skip_getid(struct atkbd *atkbd)
+{
+ return atkbd->translated && atkbd_is_portable_device();
+}
+#else
+static inline bool atkbd_skip_getid(struct atkbd *atkbd) { return false; }
+#endif
+
/*
* atkbd_probe() probes for an AT keyboard on a serio port.
*/
*/
param[0] = param[1] = 0xa5; /* initialize with invalid values */
- if (ps2_command(ps2dev, param, ATKBD_CMD_GETID)) {
+ if (atkbd_skip_getid(atkbd) || ps2_command(ps2dev, param, ATKBD_CMD_GETID)) {
/*
- * If the get ID command failed, we check if we can at least set the LEDs on
- * the keyboard. This should work on every keyboard out there. It also turns
- * the LEDs off, which we want anyway.
+ * If the get ID command was skipped or failed, we check if we can at least set
+ * the LEDs on the keyboard. This should work on every keyboard out there.
+ * It also turns the LEDs off, which we want anyway.
*/
param[0] = 0;
if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS))
keys->codes = devm_kmemdup(&pdev->dev, micro_keycodes,
keys->input->keycodesize * keys->input->keycodemax,
GFP_KERNEL);
+ if (!keys->codes)
+ return -ENOMEM;
+
keys->input->keycode = keys->codes;
__set_bit(EV_KEY, keys->input->evbit);
info->name = "power";
info->event_code = KEY_POWER;
info->wakeup = true;
+ } else if (upage == 0x01 && usage == 0xc6) {
+ info->name = "airplane mode switch";
+ info->event_type = EV_SW;
+ info->event_code = SW_RFKILL_ALL;
+ info->active_low = false;
} else if (upage == 0x01 && usage == 0xca) {
info->name = "rotation lock switch";
info->event_type = EV_SW;
return 0;
}
-static int __exit amimouse_remove(struct platform_device *pdev)
+static void __exit amimouse_remove(struct platform_device *pdev)
{
struct input_dev *dev = platform_get_drvdata(pdev);
input_unregister_device(dev);
- return 0;
}
static struct platform_driver amimouse_driver = {
- .remove = __exit_p(amimouse_remove),
+ .remove_new = __exit_p(amimouse_remove),
.driver = {
.name = "amiga-mouse",
},
"LEN009b", /* T580 */
"LEN0402", /* X1 Extreme Gen 2 / P1 Gen 2 */
"LEN040f", /* P1 Gen 3 */
+ "LEN0411", /* L14 Gen 1 */
"LEN200f", /* T450s */
"LEN2044", /* L470 */
"LEN2054", /* E480 */
},
.driver_data = (void *)(SERIO_QUIRK_DRITEK)
},
+ {
+ /* Acer TravelMate P459-G2-M */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate P459-G2-M"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX)
+ },
{
/* Amoi M636/A737 */
.matches = {