rtc: remove fb-puv3 driver
authorMike Rapoport <rppt@linux.ibm.com>
Wed, 10 Jun 2020 06:57:50 +0000 (09:57 +0300)
committerMike Rapoport <rppt@linux.ibm.com>
Wed, 1 Jul 2020 09:10:59 +0000 (12:10 +0300)
The unicore32 port is removed from the kernel.
There is no point to keep stale RTC driver for this architecture.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
MAINTAINERS
drivers/rtc/Kconfig
drivers/rtc/Makefile
drivers/rtc/rtc-puv3.c [deleted file]

index 79d70ac..e4787ac 100644 (file)
@@ -13585,7 +13585,6 @@ M:      Guan Xuetao <gxt@pku.edu.cn>
 S:     Maintained
 W:     http://mprc.pku.edu.cn/~guanxuetao/linux
 T:     git git://github.com/gxt/linux.git
-F:     drivers/rtc/rtc-puv3.c
 
 PLANTOWER PMS7003 AIR POLLUTION SENSOR DRIVER
 M:     Tomasz Duszynski <tduszyns@gmail.com>
index b54d87d..f3b8e6d 100644 (file)
@@ -1729,15 +1729,6 @@ config RTC_DRV_TEGRA
          This drive can also be built as a module. If so, the module
          will be called rtc-tegra.
 
-config RTC_DRV_PUV3
-       tristate "PKUnity v3 RTC support"
-       depends on ARCH_PUV3
-       help
-         This enables support for the RTC in the PKUnity-v3 SoCs.
-
-         This drive can also be built as a module. If so, the module
-         will be called rtc-puv3.
-
 config RTC_DRV_LOONGSON1
        tristate "loongson1 RTC support"
        depends on MACH_LOONGSON32
index 0721752..880e08a 100644 (file)
@@ -128,7 +128,6 @@ obj-$(CONFIG_RTC_DRV_PL030) += rtc-pl030.o
 obj-$(CONFIG_RTC_DRV_PL031)    += rtc-pl031.o
 obj-$(CONFIG_RTC_DRV_PM8XXX)   += rtc-pm8xxx.o
 obj-$(CONFIG_RTC_DRV_PS3)      += rtc-ps3.o
-obj-$(CONFIG_RTC_DRV_PUV3)     += rtc-puv3.o
 obj-$(CONFIG_RTC_DRV_PXA)      += rtc-pxa.o
 obj-$(CONFIG_RTC_DRV_R7301)    += rtc-r7301.o
 obj-$(CONFIG_RTC_DRV_R9701)    += rtc-r9701.o
diff --git a/drivers/rtc/rtc-puv3.c b/drivers/rtc/rtc-puv3.c
deleted file mode 100644 (file)
index 954b88d..0000000
+++ /dev/null
@@ -1,286 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * RTC driver code specific to PKUnity SoC and UniCore ISA
- *
- *     Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
- *     Copyright (C) 2001-2010 Guan Xuetao
- */
-
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/rtc.h>
-#include <linux/bcd.h>
-#include <linux/clk.h>
-#include <linux/log2.h>
-#include <linux/slab.h>
-#include <linux/uaccess.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-
-static struct resource *puv3_rtc_mem;
-
-static int puv3_rtc_alarmno = IRQ_RTCAlarm;
-static int puv3_rtc_tickno  = IRQ_RTC;
-
-static DEFINE_SPINLOCK(puv3_rtc_pie_lock);
-
-/* IRQ Handlers */
-static irqreturn_t puv3_rtc_alarmirq(int irq, void *id)
-{
-       struct rtc_device *rdev = id;
-
-       writel(readl(RTC_RTSR) | RTC_RTSR_AL, RTC_RTSR);
-       rtc_update_irq(rdev, 1, RTC_AF | RTC_IRQF);
-       return IRQ_HANDLED;
-}
-
-static irqreturn_t puv3_rtc_tickirq(int irq, void *id)
-{
-       struct rtc_device *rdev = id;
-
-       writel(readl(RTC_RTSR) | RTC_RTSR_HZ, RTC_RTSR);
-       rtc_update_irq(rdev, 1, RTC_PF | RTC_IRQF);
-       return IRQ_HANDLED;
-}
-
-/* Update control registers */
-static void puv3_rtc_setaie(struct device *dev, int to)
-{
-       unsigned int tmp;
-
-       dev_dbg(dev, "%s: aie=%d\n", __func__, to);
-
-       tmp = readl(RTC_RTSR) & ~RTC_RTSR_ALE;
-
-       if (to)
-               tmp |= RTC_RTSR_ALE;
-
-       writel(tmp, RTC_RTSR);
-}
-
-static int puv3_rtc_setpie(struct device *dev, int enabled)
-{
-       unsigned int tmp;
-
-       dev_dbg(dev, "%s: pie=%d\n", __func__, enabled);
-
-       spin_lock_irq(&puv3_rtc_pie_lock);
-       tmp = readl(RTC_RTSR) & ~RTC_RTSR_HZE;
-
-       if (enabled)
-               tmp |= RTC_RTSR_HZE;
-
-       writel(tmp, RTC_RTSR);
-       spin_unlock_irq(&puv3_rtc_pie_lock);
-
-       return 0;
-}
-
-/* Time read/write */
-static int puv3_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
-{
-       rtc_time64_to_tm(readl(RTC_RCNR), rtc_tm);
-
-       dev_dbg(dev, "read time %ptRr\n", rtc_tm);
-
-       return 0;
-}
-
-static int puv3_rtc_settime(struct device *dev, struct rtc_time *tm)
-{
-       dev_dbg(dev, "set time %ptRr\n", tm);
-
-       writel(rtc_tm_to_time64(tm), RTC_RCNR);
-
-       return 0;
-}
-
-static int puv3_rtc_getalarm(struct device *dev, struct rtc_wkalrm *alrm)
-{
-       struct rtc_time *alm_tm = &alrm->time;
-
-       rtc_time64_to_tm(readl(RTC_RTAR), alm_tm);
-
-       alrm->enabled = readl(RTC_RTSR) & RTC_RTSR_ALE;
-
-       dev_dbg(dev, "read alarm: %d, %ptRr\n", alrm->enabled, alm_tm);
-
-       return 0;
-}
-
-static int puv3_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
-{
-       struct rtc_time *tm = &alrm->time;
-
-       dev_dbg(dev, "set alarm: %d, %ptRr\n", alrm->enabled, tm);
-
-       writel(rtc_tm_to_time64(tm), RTC_RTAR);
-
-       puv3_rtc_setaie(dev, alrm->enabled);
-
-       if (alrm->enabled)
-               enable_irq_wake(puv3_rtc_alarmno);
-       else
-               disable_irq_wake(puv3_rtc_alarmno);
-
-       return 0;
-}
-
-static int puv3_rtc_proc(struct device *dev, struct seq_file *seq)
-{
-       seq_printf(seq, "periodic_IRQ\t: %s\n",
-                    (readl(RTC_RTSR) & RTC_RTSR_HZE) ? "yes" : "no");
-       return 0;
-}
-
-static const struct rtc_class_ops puv3_rtcops = {
-       .read_time      = puv3_rtc_gettime,
-       .set_time       = puv3_rtc_settime,
-       .read_alarm     = puv3_rtc_getalarm,
-       .set_alarm      = puv3_rtc_setalarm,
-       .proc           = puv3_rtc_proc,
-};
-
-static void puv3_rtc_enable(struct device *dev, int en)
-{
-       if (!en) {
-               writel(readl(RTC_RTSR) & ~RTC_RTSR_HZE, RTC_RTSR);
-       } else {
-               /* re-enable the device, and check it is ok */
-               if ((readl(RTC_RTSR) & RTC_RTSR_HZE) == 0) {
-                       dev_info(dev, "rtc disabled, re-enabling\n");
-                       writel(readl(RTC_RTSR) | RTC_RTSR_HZE, RTC_RTSR);
-               }
-       }
-}
-
-static int puv3_rtc_remove(struct platform_device *dev)
-{
-       puv3_rtc_setpie(&dev->dev, 0);
-       puv3_rtc_setaie(&dev->dev, 0);
-
-       release_resource(puv3_rtc_mem);
-       kfree(puv3_rtc_mem);
-
-       return 0;
-}
-
-static int puv3_rtc_probe(struct platform_device *pdev)
-{
-       struct rtc_device *rtc;
-       struct resource *res;
-       int ret;
-
-       dev_dbg(&pdev->dev, "%s: probe=%p\n", __func__, pdev);
-
-       /* find the IRQs */
-       puv3_rtc_tickno = platform_get_irq(pdev, 1);
-       if (puv3_rtc_tickno < 0)
-               return -ENOENT;
-
-       puv3_rtc_alarmno = platform_get_irq(pdev, 0);
-       if (puv3_rtc_alarmno < 0)
-               return -ENOENT;
-
-       dev_dbg(&pdev->dev, "PKUnity_rtc: tick irq %d, alarm irq %d\n",
-                puv3_rtc_tickno, puv3_rtc_alarmno);
-
-       rtc = devm_rtc_allocate_device(&pdev->dev);
-       if (IS_ERR(rtc))
-               return PTR_ERR(rtc);
-
-       ret = devm_request_irq(&pdev->dev, puv3_rtc_alarmno, puv3_rtc_alarmirq,
-                              0, "pkunity-rtc alarm", rtc);
-       if (ret) {
-               dev_err(&pdev->dev, "IRQ%d error %d\n", puv3_rtc_alarmno, ret);
-               return ret;
-       }
-
-       ret = devm_request_irq(&pdev->dev, puv3_rtc_tickno, puv3_rtc_tickirq,
-                              0, "pkunity-rtc tick", rtc);
-       if (ret) {
-               dev_err(&pdev->dev, "IRQ%d error %d\n", puv3_rtc_tickno, ret);
-               return ret;
-       }
-
-       /* get the memory region */
-       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-       if (res == NULL) {
-               dev_err(&pdev->dev, "failed to get memory region resource\n");
-               return -ENOENT;
-       }
-
-       puv3_rtc_mem = request_mem_region(res->start, resource_size(res),
-                                         pdev->name);
-
-       if (puv3_rtc_mem == NULL) {
-               dev_err(&pdev->dev, "failed to reserve memory region\n");
-               ret = -ENOENT;
-               goto err_nores;
-       }
-
-       puv3_rtc_enable(&pdev->dev, 1);
-
-       /* register RTC and exit */
-       rtc->ops = &puv3_rtcops;
-       rtc->range_max = U32_MAX;
-       ret = rtc_register_device(rtc);
-       if (ret)
-               goto err_nortc;
-
-       /* platform setup code should have handled this; sigh */
-       if (!device_can_wakeup(&pdev->dev))
-               device_init_wakeup(&pdev->dev, 1);
-
-       platform_set_drvdata(pdev, rtc);
-       return 0;
-
- err_nortc:
-       puv3_rtc_enable(&pdev->dev, 0);
-       release_resource(puv3_rtc_mem);
-
- err_nores:
-       return ret;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int ticnt_save;
-
-static int puv3_rtc_suspend(struct device *dev)
-{
-       /* save RTAR for anyone using periodic interrupts */
-       ticnt_save = readl(RTC_RTAR);
-       puv3_rtc_enable(dev, 0);
-       return 0;
-}
-
-static int puv3_rtc_resume(struct device *dev)
-{
-       puv3_rtc_enable(dev, 1);
-       writel(ticnt_save, RTC_RTAR);
-       return 0;
-}
-#endif
-
-static SIMPLE_DEV_PM_OPS(puv3_rtc_pm_ops, puv3_rtc_suspend, puv3_rtc_resume);
-
-static struct platform_driver puv3_rtc_driver = {
-       .probe          = puv3_rtc_probe,
-       .remove         = puv3_rtc_remove,
-       .driver         = {
-               .name   = "PKUnity-v3-RTC",
-               .pm     = &puv3_rtc_pm_ops,
-       }
-};
-
-module_platform_driver(puv3_rtc_driver);
-
-MODULE_DESCRIPTION("RTC Driver for the PKUnity v3 chip");
-MODULE_AUTHOR("Hu Dongliang");
-MODULE_LICENSE("GPL v2");