Kay Sievers <kay.sievers@vrfy.org>
Kenneth W Chen <kenneth.w.chen@intel.com>
Koushik <raghavendra.koushik@neterion.com>
+Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Leonid I Ananiev <leonid.i.ananiev@intel.com>
Linas Vepstas <linas@austin.ibm.com>
Mark Brown <broonie@sirena.org.uk>
Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Takashi YOSHII <takashi.yoshii.zj@renesas.com>
+Yusuke Goda <goda.yusuke@renesas.com>
--- /dev/null
+What: /sys/firmware/acpi/pm_profile
+Date: 03-Nov-2011
+KernelVersion: v3.2
+Contact: linux-acpi@vger.kernel.org
+Description: The ACPI pm_profile sysfs interface exports the platform
+ power management (and performance) requirement expectations
+ as provided by BIOS. The integer value is directly passed as
+ retrieved from the FADT ACPI table.
+Values: For possible values see ACPI specification:
+ 5.2.9 Fixed ACPI Description Table (FADT)
+ Field: Preferred_PM_Profile
+
+ Currently these values are defined by spec:
+ 0 Unspecified
+ 1 Desktop
+ 2 Mobile
+ 3 Workstation
+ 4 Enterprise Server
+ 5 SOHO Server
+ 6 Appliance PC
+ 7 Performance Server
+ >7 Reserved
when a discarded area is read the discard_zeroes_data
parameter will be set to one. Otherwise it will be 0 and
the result of reading a discarded area is undefined.
-What: /sys/block/<disk>/alias
-Date: Aug 2011
-Contact: Nao Nishijima <nao.nishijima.xt@hitachi.com>
-Description:
- A raw device name of a disk does not always point a same disk
- each boot-up time. Therefore, users have to use persistent
- device names, which udev creates when the kernel finds a disk,
- instead of raw device name. However, kernel doesn't show those
- persistent names on its messages (e.g. dmesg).
- This file can store an alias of the disk and it would be
- appeared in kernel messages if it is set. A disk can have an
- alias which length is up to 255bytes. Users can use alphabets,
- numbers, "-" and "_" in alias name. This file is writeonce.
The Linux DRM layer contains code intended to support the needs
of complex graphics devices, usually containing programmable
pipelines well suited to 3D graphics acceleration. Graphics
- drivers in the kernel can make use of DRM functions to make
+ drivers in the kernel may make use of DRM functions to make
tasks like memory management, interrupt handling and DMA easier,
and provide a uniform interface to applications.
</para>
existing drivers.
</para>
<para>
- First, we'll go over some typical driver initialization
+ First, we go over some typical driver initialization
requirements, like setting up command buffers, creating an
initial output configuration, and initializing core services.
- Subsequent sections will cover core internals in more detail,
+ Subsequent sections cover core internals in more detail,
providing implementation notes and examples.
</para>
<para>
</para>
<para>
The core of every DRM driver is struct drm_driver. Drivers
- will typically statically initialize a drm_driver structure,
+ typically statically initialize a drm_driver structure,
then pass it to drm_init() at load time.
</para>
</para>
<programlisting>
static struct drm_driver driver = {
- /* don't use mtrr's here, the Xserver or user space app should
- * deal with them for intel hardware.
+ /* Don't use MTRRs here; the Xserver or userspace app should
+ * deal with them for Intel hardware.
*/
.driver_features =
DRIVER_USE_AGP | DRIVER_REQUIRE_AGP |
</programlisting>
<para>
In the example above, taken from the i915 DRM driver, the driver
- sets several flags indicating what core features it supports.
- We'll go over the individual callbacks in later sections. Since
+ sets several flags indicating what core features it supports;
+ we go over the individual callbacks in later sections. Since
flags indicate which features your driver supports to the DRM
core, you need to set most of them prior to calling drm_init(). Some,
like DRIVER_MODESET can be set later based on user supplied parameters,
<term>DRIVER_HAVE_IRQ</term><term>DRIVER_IRQ_SHARED</term>
<listitem>
<para>
- DRIVER_HAVE_IRQ indicates whether the driver has a IRQ
- handler, DRIVER_IRQ_SHARED indicates whether the device &
+ DRIVER_HAVE_IRQ indicates whether the driver has an IRQ
+ handler. DRIVER_IRQ_SHARED indicates whether the device &
handler support shared IRQs (note that this is required of
PCI drivers).
</para>
<term>DRIVER_DMA_QUEUE</term>
<listitem>
<para>
- If the driver queues DMA requests and completes them
- asynchronously, this flag should be set. Deprecated.
+ Should be set if the driver queues DMA requests and completes them
+ asynchronously. Deprecated.
</para>
</listitem>
</varlistentry>
</variablelist>
<para>
In this specific case, the driver requires AGP and supports
- IRQs. DMA, as we'll see, is handled by device specific ioctls
+ IRQs. DMA, as discussed later, is handled by device-specific ioctls
in this case. It also supports the kernel mode setting APIs, though
unlike in the actual i915 driver source, this example unconditionally
exports KMS capability.
initial output configuration.
</para>
<para>
- Note that the tasks performed at driver load time must not
- conflict with DRM client requirements. For instance, if user
+ If compatibility is a concern (e.g. with drivers converted over
+ to the new interfaces from the old ones), care must be taken to
+ prevent device initialization and control that is incompatible with
+ currently active userspace drivers. For instance, if user
level mode setting drivers are in use, it would be problematic
to perform output discovery & configuration at load time.
- Likewise, if pre-memory management aware user level drivers are
+ Likewise, if user-level drivers unaware of memory management are
in use, memory management and command buffer setup may need to
- be omitted. These requirements are driver specific, and care
+ be omitted. These requirements are driver-specific, and care
needs to be taken to keep both old and new applications and
libraries working. The i915 driver supports the "modeset"
module parameter to control whether advanced features are
- enabled at load time or in legacy fashion. If compatibility is
- a concern (e.g. with drivers converted over to the new interfaces
- from the old ones), care must be taken to prevent incompatible
- device initialization and control with the currently active
- userspace drivers.
+ enabled at load time or in legacy fashion.
</para>
<sect2>
<title>Driver private & performance counters</title>
<para>
The driver private hangs off the main drm_device structure and
- can be used for tracking various device specific bits of
+ can be used for tracking various device-specific bits of
information, like register offsets, command buffer status,
register state for suspend/resume, etc. At load time, a
- driver can simply allocate one and set drm_device.dev_priv
- appropriately; at unload the driver can free it and set
- drm_device.dev_priv to NULL.
+ driver may simply allocate one and set drm_device.dev_priv
+ appropriately; it should be freed and drm_device.dev_priv set
+ to NULL when the driver is unloaded.
</para>
<para>
- The DRM supports several counters which can be used for rough
+ The DRM supports several counters which may be used for rough
performance characterization. Note that the DRM stat counter
system is not often used by applications, and supporting
additional counters is completely optional.
These interfaces are deprecated and should not be used. If performance
monitoring is desired, the developer should investigate and
potentially enhance the kernel perf and tracing infrastructure to export
- GPU related performance information to performance monitoring
- tools and applications.
+ GPU related performance information for consumption by performance
+ monitoring tools and applications.
</para>
</sect2>
<sect2>
<title>Configuring the device</title>
<para>
- Obviously, device configuration will be device specific.
+ Obviously, device configuration is device-specific.
However, there are several common operations: finding a
device's PCI resources, mapping them, and potentially setting
up an IRQ handler.
<para>
Finding & mapping resources is fairly straightforward. The
DRM wrapper functions, drm_get_resource_start() and
- drm_get_resource_len() can be used to find BARs on the given
+ drm_get_resource_len(), may be used to find BARs on the given
drm_device struct. Once those values have been retrieved, the
driver load function can call drm_addmap() to create a new
- mapping for the BAR in question. Note you'll probably want a
+ mapping for the BAR in question. Note that you probably want a
drm_local_map_t in your driver private structure to track any
mappings you create.
<!-- !Fdrivers/gpu/drm/drm_bufs.c drm_get_resource_* -->
<para>
if compatibility with other operating systems isn't a concern
(DRM drivers can run under various BSD variants and OpenSolaris),
- native Linux calls can be used for the above, e.g. pci_resource_*
+ native Linux calls may be used for the above, e.g. pci_resource_*
and iomap*/iounmap. See the Linux device driver book for more
info.
</para>
<para>
- Once you have a register map, you can use the DRM_READn() and
+ Once you have a register map, you may use the DRM_READn() and
DRM_WRITEn() macros to access the registers on your device, or
- use driver specific versions to offset into your MMIO space
- relative to a driver specific base pointer (see I915_READ for
- example).
+ use driver-specific versions to offset into your MMIO space
+ relative to a driver-specific base pointer (see I915_READ for
+ an example).
</para>
<para>
If your device supports interrupt generation, you may want to
- setup an interrupt handler at driver load time as well. This
+ set up an interrupt handler when the driver is loaded. This
is done using the drm_irq_install() function. If your device
supports vertical blank interrupts, it should call
drm_vblank_init() to initialize the core vblank handling code before
</para>
<!--!Fdrivers/char/drm/drm_irq.c drm_irq_install-->
<para>
- Once your interrupt handler is registered (it'll use your
+ Once your interrupt handler is registered (it uses your
drm_driver.irq_handler as the actual interrupt handling
function), you can safely enable interrupts on your device,
assuming any other state your interrupt handler uses is also
using the pci_map_rom() call, a convenience function that
takes care of mapping the actual ROM, whether it has been
shadowed into memory (typically at address 0xc0000) or exists
- on the PCI device in the ROM BAR. Note that once you've
- mapped the ROM and extracted any necessary information, be
- sure to unmap it; on many devices the ROM address decoder is
- shared with other BARs, so leaving it mapped can cause
+ on the PCI device in the ROM BAR. Note that after the ROM
+ has been mapped and any necessary information has been extracted,
+ it should be unmapped; on many devices, the ROM address decoder is
+ shared with other BARs, so leaving it mapped could cause
undesired behavior like hangs or memory corruption.
<!--!Fdrivers/pci/rom.c pci_map_rom-->
</para>
should support a memory manager.
</para>
<para>
- If your driver supports memory management (it should!), you'll
+ If your driver supports memory management (it should!), you
need to set that up at load time as well. How you initialize
- it depends on which memory manager you're using, TTM or GEM.
+ it depends on which memory manager you're using: TTM or GEM.
</para>
<sect3>
<title>TTM initialization</title>
and devices with dedicated video RAM (VRAM), i.e. most discrete
graphics devices. If your device has dedicated RAM, supporting
TTM is desirable. TTM also integrates tightly with your
- driver specific buffer execution function. See the radeon
+ driver-specific buffer execution function. See the radeon
driver for examples.
</para>
<para>
created by the memory manager at runtime. Your global TTM should
have a type of TTM_GLOBAL_TTM_MEM. The size field for the global
object should be sizeof(struct ttm_mem_global), and the init and
- release hooks should point at your driver specific init and
- release routines, which will probably eventually call
- ttm_mem_global_init and ttm_mem_global_release respectively.
+ release hooks should point at your driver-specific init and
+ release routines, which probably eventually call
+ ttm_mem_global_init and ttm_mem_global_release, respectively.
</para>
<para>
Once your global TTM accounting structure is set up and initialized
- (done by calling ttm_global_item_ref on the global object you
- just created), you'll need to create a buffer object TTM to
+ by calling ttm_global_item_ref() on it,
+ you need to create a buffer object TTM to
provide a pool for buffer object allocation by clients and the
kernel itself. The type of this object should be TTM_GLOBAL_TTM_BO,
and its size should be sizeof(struct ttm_bo_global). Again,
- driver specific init and release functions can be provided,
- likely eventually calling ttm_bo_global_init and
- ttm_bo_global_release, respectively. Also like the previous
- object, ttm_global_item_ref is used to create an initial reference
+ driver-specific init and release functions may be provided,
+ likely eventually calling ttm_bo_global_init() and
+ ttm_bo_global_release(), respectively. Also, like the previous
+ object, ttm_global_item_ref() is used to create an initial reference
count for the TTM, which will call your initialization function.
</para>
</sect3>
GEM is an alternative to TTM, designed specifically for UMA
devices. It has simpler initialization and execution requirements
than TTM, but has no VRAM management capability. Core GEM
- initialization is comprised of a basic drm_mm_init call to create
+ is initialized by calling drm_mm_init() to create
a GTT DRM MM object, which provides an address space pool for
- object allocation. In a KMS configuration, the driver will
- need to allocate and initialize a command ring buffer following
- basic GEM initialization. Most UMA devices have a so-called
+ object allocation. In a KMS configuration, the driver
+ needs to allocate and initialize a command ring buffer following
+ core GEM initialization. A UMA device usually has what is called a
"stolen" memory region, which provides space for the initial
framebuffer and large, contiguous memory regions required by the
- device. This space is not typically managed by GEM, and must
+ device. This space is not typically managed by GEM, and it must
be initialized separately into its own DRM MM object.
</para>
<para>
- Initialization will be driver specific, and will depend on
- the architecture of the device. In the case of Intel
+ Initialization is driver-specific. In the case of Intel
integrated graphics chips like 965GM, GEM initialization can
be done by calling the internal GEM init function,
i915_gem_do_init(). Since the 965GM is a UMA device
- (i.e. it doesn't have dedicated VRAM), GEM will manage
+ (i.e. it doesn't have dedicated VRAM), GEM manages
making regular RAM available for GPU operations. Memory set
aside by the BIOS (called "stolen" memory by the i915
- driver) will be managed by the DRM memrange allocator; the
- rest of the aperture will be managed by GEM.
+ driver) is managed by the DRM memrange allocator; the
+ rest of the aperture is managed by GEM.
<programlisting>
/* Basic memrange allocator for stolen space (aka vram) */
drm_memrange_init(&dev_priv->vram, 0, prealloc_size);
<!--!Edrivers/char/drm/drm_memrange.c-->
</para>
<para>
- Once the memory manager has been set up, we can allocate the
+ Once the memory manager has been set up, we may allocate the
command buffer. In the i915 case, this is also done with a
GEM function, i915_gem_init_ringbuffer().
</para>
<sect2>
<title>Output configuration</title>
<para>
- The final initialization task is output configuration. This involves
- finding and initializing the CRTCs, encoders and connectors
- for your device, creating an initial configuration and
- registering a framebuffer console driver.
+ The final initialization task is output configuration. This involves:
+ <itemizedlist>
+ <listitem>
+ Finding and initializing the CRTCs, encoders, and connectors
+ for the device.
+ </listitem>
+ <listitem>
+ Creating an initial configuration.
+ </listitem>
+ <listitem>
+ Registering a framebuffer console driver.
+ </listitem>
+ </itemizedlist>
</para>
<sect3>
<title>Output discovery and initialization</title>
<para>
- Several core functions exist to create CRTCs, encoders and
- connectors, namely drm_crtc_init(), drm_connector_init() and
+ Several core functions exist to create CRTCs, encoders, and
+ connectors, namely: drm_crtc_init(), drm_connector_init(), and
drm_encoder_init(), along with several "helper" functions to
perform common tasks.
</para>
</programlisting>
<para>
In the example above (again, taken from the i915 driver), a
- CRT connector and encoder combination is created. A device
- specific i2c bus is also created, for fetching EDID data and
+ CRT connector and encoder combination is created. A device-specific
+ i2c bus is also created for fetching EDID data and
performing monitor detection. Once the process is complete,
- the new connector is registered with sysfs, to make its
+ the new connector is registered with sysfs to make its
properties available to applications.
</para>
<sect4>
Since many PC-class graphics devices have similar display output
designs, the DRM provides a set of helper functions to make
output management easier. The core helper routines handle
- encoder re-routing and disabling of unused functions following
- mode set. Using the helpers is optional, but recommended for
+ encoder re-routing and the disabling of unused functions following
+ mode setting. Using the helpers is optional, but recommended for
devices with PC-style architectures (i.e. a set of display planes
for feeding pixels to encoders which are in turn routed to
connectors). Devices with more complex requirements needing
- finer grained management can opt to use the core callbacks
+ finer grained management may opt to use the core callbacks
directly.
</para>
<para>
</para>
</sect4>
<para>
- For each encoder, CRTC and connector, several functions must
- be provided, depending on the object type. Encoder objects
- need to provide a DPMS (basically on/off) function, mode fixup
- (for converting requested modes into native hardware timings),
- and prepare, set and commit functions for use by the core DRM
- helper functions. Connector helpers need to provide mode fetch and
- validity functions as well as an encoder matching function for
- returning an ideal encoder for a given connector. The core
- connector functions include a DPMS callback, (deprecated)
- save/restore routines, detection, mode probing, property handling,
- and cleanup functions.
+ Each encoder object needs to provide:
+ <itemizedlist>
+ <listitem>
+ A DPMS (basically on/off) function.
+ </listitem>
+ <listitem>
+ A mode-fixup function (for converting requested modes into
+ native hardware timings).
+ </listitem>
+ <listitem>
+ Functions (prepare, set, and commit) for use by the core DRM
+ helper functions.
+ </listitem>
+ </itemizedlist>
+ Connector helpers need to provide functions (mode-fetch, validity,
+ and encoder-matching) for returning an ideal encoder for a given
+ connector. The core connector functions include a DPMS callback,
+ save/restore routines (deprecated), detection, mode probing,
+ property handling, and cleanup functions.
</para>
<!--!Edrivers/char/drm/drm_crtc.h-->
<!--!Edrivers/char/drm/drm_crtc.c-->
<title>VBlank event handling</title>
<para>
The DRM core exposes two vertical blank related ioctls:
- DRM_IOCTL_WAIT_VBLANK and DRM_IOCTL_MODESET_CTL.
+ <variablelist>
+ <varlistentry>
+ <term>DRM_IOCTL_WAIT_VBLANK</term>
+ <listitem>
+ <para>
+ This takes a struct drm_wait_vblank structure as its argument,
+ and it is used to block or request a signal when a specified
+ vblank event occurs.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>DRM_IOCTL_MODESET_CTL</term>
+ <listitem>
+ <para>
+ This should be called by application level drivers before and
+ after mode setting, since on many devices the vertical blank
+ counter is reset at that time. Internally, the DRM snapshots
+ the last vblank count when the ioctl is called with the
+ _DRM_PRE_MODESET command, so that the counter won't go backwards
+ (which is dealt with when _DRM_POST_MODESET is used).
+ </para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
<!--!Edrivers/char/drm/drm_irq.c-->
</para>
- <para>
- DRM_IOCTL_WAIT_VBLANK takes a struct drm_wait_vblank structure
- as its argument, and is used to block or request a signal when a
- specified vblank event occurs.
- </para>
- <para>
- DRM_IOCTL_MODESET_CTL should be called by application level
- drivers before and after mode setting, since on many devices the
- vertical blank counter will be reset at that time. Internally,
- the DRM snapshots the last vblank count when the ioctl is called
- with the _DRM_PRE_MODESET command so that the counter won't go
- backwards (which is dealt with when _DRM_POST_MODESET is used).
- </para>
<para>
To support the functions above, the DRM core provides several
helper functions for tracking vertical blank counters, and
register. The enable and disable vblank callbacks should enable
and disable vertical blank interrupts, respectively. In the
absence of DRM clients waiting on vblank events, the core DRM
- code will use the disable_vblank() function to disable
- interrupts, which saves power. They'll be re-enabled again when
+ code uses the disable_vblank() function to disable
+ interrupts, which saves power. They are re-enabled again when
a client calls the vblank wait ioctl above.
</para>
<para>
- Devices that don't provide a count register can simply use an
+ A device that doesn't provide a count register may simply use an
internal atomic counter incremented on every vertical blank
- interrupt, and can make their enable and disable vblank
- functions into no-ops.
+ interrupt (and then treat the enable_vblank() and disable_vblank()
+ callbacks as no-ops).
</para>
</sect1>
<sect1>
<title>Memory management</title>
<para>
- The memory manager lies at the heart of many DRM operations, and
- is also required to support advanced client features like OpenGL
- pbuffers. The DRM currently contains two memory managers, TTM
+ The memory manager lies at the heart of many DRM operations; it
+ is required to support advanced client features like OpenGL
+ pbuffers. The DRM currently contains two memory managers: TTM
and GEM.
</para>
<para>
GEM-enabled drivers must provide gem_init_object() and
gem_free_object() callbacks to support the core memory
- allocation routines. They should also provide several driver
- specific ioctls to support command execution, pinning, buffer
+ allocation routines. They should also provide several driver-specific
+ ioctls to support command execution, pinning, buffer
read & write, mapping, and domain ownership transfers.
</para>
<para>
- On a fundamental level, GEM involves several operations: memory
- allocation and freeing, command execution, and aperture management
- at command execution time. Buffer object allocation is relatively
+ On a fundamental level, GEM involves several operations:
+ <itemizedlist>
+ <listitem>Memory allocation and freeing</listitem>
+ <listitem>Command execution</listitem>
+ <listitem>Aperture management at command execution time</listitem>
+ </itemizedlist>
+ Buffer object allocation is relatively
straightforward and largely provided by Linux's shmem layer, which
provides memory to back each object. When mapped into the GTT
or used in a command buffer, the backing pages for an object are
flushed to memory and marked write combined so as to be coherent
- with the GPU. Likewise, when the GPU finishes rendering to an object,
- if the CPU accesses it, it must be made coherent with the CPU's view
+ with the GPU. Likewise, if the CPU accesses an object after the GPU
+ has finished rendering to the object, then the object must be made
+ coherent with the CPU's view
of memory, usually involving GPU cache flushing of various kinds.
- This core CPU<->GPU coherency management is provided by the GEM
- set domain function, which evaluates an object's current domain and
+ This core CPU<->GPU coherency management is provided by a
+ device-specific ioctl, which evaluates an object's current domain and
performs any necessary flushing or synchronization to put the object
into the desired coherency domain (note that the object may be busy,
- i.e. an active render target; in that case the set domain function
- will block the client and wait for rendering to complete before
+ i.e. an active render target; in that case, setting the domain
+ blocks the client and waits for rendering to complete before
performing any necessary flushing operations).
</para>
<para>
Perhaps the most important GEM function is providing a command
execution interface to clients. Client programs construct command
- buffers containing references to previously allocated memory objects
- and submit them to GEM. At that point, GEM will take care to bind
+ buffers containing references to previously allocated memory objects,
+ and then submit them to GEM. At that point, GEM takes care to bind
all the objects into the GTT, execute the buffer, and provide
necessary synchronization between clients accessing the same buffers.
This often involves evicting some objects from the GTT and re-binding
others (a fairly expensive operation), and providing relocation
support which hides fixed GTT offsets from clients. Clients must
take care not to submit command buffers that reference more objects
- than can fit in the GTT or GEM will reject them and no rendering
+ than can fit in the GTT; otherwise, GEM will reject them and no rendering
will occur. Similarly, if several objects in the buffer require
fence registers to be allocated for correct rendering (e.g. 2D blits
on pre-965 chips), care must be taken not to require more fence
<title>Output management</title>
<para>
At the core of the DRM output management code is a set of
- structures representing CRTCs, encoders and connectors.
+ structures representing CRTCs, encoders, and connectors.
</para>
<para>
A CRTC is an abstraction representing a part of the chip that
<sect1>
<title>Framebuffer management</title>
<para>
- In order to set a mode on a given CRTC, encoder and connector
- configuration, clients need to provide a framebuffer object which
- will provide a source of pixels for the CRTC to deliver to the encoder(s)
- and ultimately the connector(s) in the configuration. A framebuffer
- is fundamentally a driver specific memory object, made into an opaque
- handle by the DRM addfb function. Once an fb has been created this
- way it can be passed to the KMS mode setting routines for use in
- a configuration.
+ Clients need to provide a framebuffer object which provides a source
+ of pixels for a CRTC to deliver to the encoder(s) and ultimately the
+ connector(s). A framebuffer is fundamentally a driver-specific memory
+ object, made into an opaque handle by the DRM's addfb() function.
+ Once a framebuffer has been created this way, it may be passed to the
+ KMS mode setting routines for use in a completed configuration.
</para>
</sect1>
<sect1>
<title>Command submission & fencing</title>
<para>
- This should cover a few device specific command submission
+ This should cover a few device-specific command submission
implementations.
</para>
</sect1>
<para>
The DRM core provides some suspend/resume code, but drivers
wanting full suspend/resume support should provide save() and
- restore() functions. These will be called at suspend,
+ restore() functions. These are called at suspend,
hibernate, or resume time, and should perform any state save or
restore required by your device across suspend or hibernate
states.
<para>
The DRM core exports several interfaces to applications,
generally intended to be used through corresponding libdrm
- wrapper functions. In addition, drivers export device specific
- interfaces for use by userspace drivers & device aware
+ wrapper functions. In addition, drivers export device-specific
+ interfaces for use by userspace drivers & device-aware
applications through ioctls and sysfs files.
</para>
<para>
management, memory management, and output management.
</para>
<para>
- Cover generic ioctls and sysfs layout here. Only need high
- level info, since man pages will cover the rest.
+ Cover generic ioctls and sysfs layout here. We only need high-level
+ info, since man pages should cover the rest.
</para>
</chapter>
</para>
<para>
The simplest way to activate the FLASH based bad block table support
- is to set the option NAND_USE_FLASH_BBT in the option field of
+ is to set the option NAND_BBT_USE_FLASH in the bbt_option field of
the nand chip structure before calling nand_scan(). For AG-AND
chips is this done by default.
This activates the default FLASH based bad block table functionality
done according to the default builtin scheme.
</para>
</sect2>
- <sect2 id="User_space_placement_selection">
- <title>User space placement selection</title>
- <para>
- All non ecc functions like mtd->read and mtd->write use an internal
- structure, which can be set by an ioctl. This structure is preset
- to the autoplacement default.
- <programlisting>
- ioctl (fd, MEMSETOOBSEL, oobsel);
- </programlisting>
- oobsel is a pointer to a user supplied structure of type
- nand_oobconfig. The contents of this structure must match the
- criteria of the filesystem, which will be used. See an example in utils/nandwrite.c.
- </para>
- </sect2>
</sect1>
<sect1 id="Spare_area_autoplacement_default">
<title>Spare area autoplacement default schemes</title>
These constants are defined in nand.h. They are ored together to describe
the functionality.
<programlisting>
-/* Use a flash based bad block table. This option is parsed by the
- * default bad block table function (nand_default_bbt). */
-#define NAND_USE_FLASH_BBT 0x00010000
/* The hw ecc generator provides a syndrome instead a ecc value on read
* This can only work if we have the ecc bytes directly behind the
* data bytes. Applies for DOC and AG-AND Renesas HW Reed Solomon generators */
"SCSI support" in your kernel configuration to be able to use SCSI
tape drives with your Smart Array 5xxx controller.
-Additionally, note that the driver will not engage the SCSI core at init
-time. The driver must be directed to dynamically engage the SCSI core via
-the /proc filesystem entry which the "block" side of the driver creates as
-/proc/driver/cciss/cciss* at runtime. This is because at driver init time,
-the SCSI core may not yet be initialized (because the driver is a block
-driver) and attempting to register it with the SCSI core in such a case
-would cause a hang. This is best done via an initialization script
-(typically in /etc/init.d, but could vary depending on distribution).
+Additionally, note that the driver will engage the SCSI core at init
+time if any tape drives or medium changers are detected. The driver may
+also be directed to dynamically engage the SCSI core via the /proc filesystem
+entry which the "block" side of the driver creates as
+/proc/driver/cciss/cciss* at runtime. This is best done via a script.
+
For example:
for x in /proc/driver/cciss/cciss[0-9]*
From a second, unrelated bash shell:
$ kill -SIGSTOP 16690
- $ kill -SIGCONT 16990
+ $ kill -SIGCONT 16690
- <at this point 16990 exits and causes 16644 to exit too>
+ <at this point 16690 exits and causes 16644 to exit too>
This happens because bash can observe both signals and choose how it
responds to them.
--- /dev/null
+* Atmel Data Flash
+
+Required properties:
+- compatible : "atmel,<model>", "atmel,<series>", "atmel,dataflash".
+
+Example:
+
+flash@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <25000000>;
+ reg = <1>;
+};
+Freescale Reference Board Bindings
+
+This document describes device tree bindings for various devices that
+exist on some Freescale reference boards.
+
* Board Control and Status (BCSR)
Required properties:
reg = <f8000000 8000>;
};
-* Freescale on board FPGA
+* Freescale on-board FPGA
This is the memory-mapped registers for on board FPGA.
Required properities:
-- compatible : should be "fsl,fpga-pixis".
-- reg : should contain the address and the length of the FPPGA register
- set.
+- compatible: should be a board-specific string followed by a string
+ indicating the type of FPGA. Example:
+ "fsl,<board>-fpga", "fsl,fpga-pixis"
+- reg: should contain the address and the length of the FPGA register set.
- interrupt-parent: should specify phandle for the interrupt controller.
-- interrupts : should specify event (wakeup) IRQ.
+- interrupts: should specify event (wakeup) IRQ.
-Example (MPC8610HPCD):
+Example (P1022DS):
- board-control@e8000000 {
- compatible = "fsl,fpga-pixis";
- reg = <0xe8000000 32>;
- interrupt-parent = <&mpic>;
- interrupts = <8 8>;
- };
+ board-control@3,0 {
+ compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
+ reg = <3 0 0x30>;
+ interrupt-parent = <&mpic>;
+ interrupts = <8 8 0 0>;
+ };
* Freescale BCSR GPIO banks
--- /dev/null
+===================================================================
+Debug Control and Status Register (DCSR) Binding
+Copyright 2011 Freescale Semiconductor Inc.
+
+NOTE: The bindings described in this document are preliminary and subject
+to change. Some of the compatible strings that contain only generic names
+may turn out to be inappropriate, or need additional properties to describe
+the integration of the block with the rest of the chip.
+
+=====================================================================
+Debug Control and Status Register Memory Map
+
+Description
+
+This node defines the base address and range for the
+defined DCSR Memory Map. Child nodes will describe the individual
+debug blocks defined within this memory space.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,dcsr" and "simple-bus".
+ The DCSR space exists in the memory-mapped bus.
+
+ - #address-cells
+ Usage: required
+ Value type: <u32>
+ Definition: A standard property. Defines the number of cells
+ or representing physical addresses in child nodes.
+
+ - #size-cells
+ Usage: required
+ Value type: <u32>
+ Definition: A standard property. Defines the number of cells
+ or representing the size of physical addresses in
+ child nodes.
+
+ - ranges
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ range of the DCSR space.
+
+EXAMPLE
+ dcsr: dcsr@f00000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+ ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+ };
+
+=====================================================================
+Event Processing Unit
+
+This node represents the region of DCSR space allocated to the EPU
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,dcsr-epu"
+
+ - interrupts
+ Usage: required
+ Value type: <prop_encoded-array>
+ Definition: Specifies the interrupts generated by the EPU.
+ The value of the interrupts property consists of three
+ interrupt specifiers. The format of the specifier is defined
+ by the binding document describing the node's interrupt parent.
+
+ The EPU counters can be configured to assert the performance
+ monitor interrupt signal based on either counter overflow or value
+ match. Which counter asserted the interrupt is captured in an EPU
+ Counter Interrupt Status Register (EPCPUISR).
+
+ The EPU unit can also be configured to assert either or both of
+ two interrupt signals based on debug event sources within the SoC.
+ The interrupt signals are epu_xt_int0 and epu_xt_int1.
+ Which event source asserted the interrupt is captured in an EPU
+ Interrupt Status Register (EPISR0,EPISR1).
+
+ Interrupt numbers are lised in order (perfmon, event0, event1).
+
+ - interrupt-parent
+ Usage: required
+ Value type: <phandle>
+ Definition: A single <phandle> value that points
+ to the interrupt parent to which the child domain
+ is being mapped. Value must be "&mpic"
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ offset and length of the DCSR space registers of the device
+ configuration block.
+
+EXAMPLE
+ dcsr-epu@0 {
+ compatible = "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ interrupt-parent = <&mpic>;
+ reg = <0x0 0x1000>;
+ };
+
+=======================================================================
+Nexus Port Controller
+
+This node represents the region of DCSR space allocated to the NPC
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,dcsr-npc"
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ offset and length of the DCSR space registers of the device
+ configuration block.
+ The Nexus Port controller occupies two regions in the DCSR space
+ with distinct functionality.
+
+ The first register range describes the Nexus Port Controller
+ control and status registers.
+
+ The second register range describes the Nexus Port Controller
+ internal trace buffer. The NPC trace buffer is a small memory buffer
+ which stages the nexus trace data for transmission via the Aurora port
+ or to a DDR based trace buffer. In some configurations the NPC trace
+ buffer can be the only trace buffer used.
+
+
+EXAMPLE
+ dcsr-npc {
+ compatible = "fsl,dcsr-npc";
+ reg = <0x1000 0x1000 0x1000000 0x8000>;
+ };
+
+=======================================================================
+Nexus Concentrator
+
+This node represents the region of DCSR space allocated to the NXC
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,dcsr-nxc"
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ offset and length of the DCSR space registers of the device
+ configuration block.
+
+EXAMPLE
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+=======================================================================
+CoreNet Debug Controller
+
+This node represents the region of DCSR space allocated to
+the CoreNet Debug controller.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,dcsr-corenet"
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ offset and length of the DCSR space registers of the device
+ configuration block.
+ The CoreNet Debug controller occupies two regions in the DCSR space
+ with distinct functionality.
+
+ The first register range describes the CoreNet Debug Controller
+ functionalty to perform transaction and transaction attribute matches.
+
+ The second register range describes the CoreNet Debug Controller
+ functionalty to trigger event notifications and debug traces.
+
+EXAMPLE
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0xB0000 0x1000>;
+ };
+
+=======================================================================
+Data Path Debug controller
+
+This node represents the region of DCSR space allocated to
+the DPAA Debug Controller. This controller controls debug configuration
+for the QMAN and FMAN blocks.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include both an identifier specific to the SoC
+ or Debug IP of the form "fsl,<soc>-dcsr-dpaa" in addition to the
+ generic compatible string "fsl,dcsr-dpaa".
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ offset and length of the DCSR space registers of the device
+ configuration block.
+
+EXAMPLE
+ dcsr-dpaa@9000 {
+ compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+
+=======================================================================
+OCeaN Debug controller
+
+This node represents the region of DCSR space allocated to
+the OCN Debug Controller.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include both an identifier specific to the SoC
+ or Debug IP of the form "fsl,<soc>-dcsr-ocn" in addition to the
+ generic compatible string "fsl,dcsr-ocn".
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ offset and length of the DCSR space registers of the device
+ configuration block.
+
+EXAMPLE
+ dcsr-ocn@11000 {
+ compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+
+=======================================================================
+DDR Controller Debug controller
+
+This node represents the region of DCSR space allocated to
+the OCN Debug Controller.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,dcsr-ddr"
+
+ - dev-handle
+ Usage: required
+ Definition: A phandle to associate this debug node with its
+ component controller.
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ offset and length of the DCSR space registers of the device
+ configuration block.
+
+EXAMPLE
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr1>;
+ reg = <0x12000 0x1000>;
+ };
+
+=======================================================================
+Nexus Aurora Link Controller
+
+This node represents the region of DCSR space allocated to
+the NAL Controller.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include both an identifier specific to the SoC
+ or Debug IP of the form "fsl,<soc>-dcsr-nal" in addition to the
+ generic compatible string "fsl,dcsr-nal".
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ offset and length of the DCSR space registers of the device
+ configuration block.
+
+EXAMPLE
+ dcsr-nal@18000 {
+ compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+
+
+=======================================================================
+Run Control and Power Management
+
+This node represents the region of DCSR space allocated to
+the RCPM Debug Controller. This functionlity is limited to the
+control the debug operations of the SoC and cores.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include both an identifier specific to the SoC
+ or Debug IP of the form "fsl,<soc>-dcsr-rcpm" in addition to the
+ generic compatible string "fsl,dcsr-rcpm".
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ offset and length of the DCSR space registers of the device
+ configuration block.
+
+EXAMPLE
+ dcsr-rcpm@22000 {
+ compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+
+=======================================================================
+Core Service Bridge Proxy
+
+This node represents the region of DCSR space allocated to
+the Core Service Bridge Proxies.
+There is one Core Service Bridge Proxy device for each CPU in the system.
+This functionlity provides access to the debug operations of the CPU.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include both an identifier specific to the cpu
+ of the form "fsl,dcsr-<cpu>-sb-proxy" in addition to the
+ generic compatible string "fsl,dcsr-cpu-sb-proxy".
+
+ - cpu-handle
+ Usage: required
+ Definition: A phandle to associate this debug node with its cpu.
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ offset and length of the DCSR space registers of the device
+ configuration block.
+
+EXAMPLE
+ dcsr-cpu-sb-proxy@40000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy",
+ "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x40000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@41000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy",
+ "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x41000 0x1000>;
+ };
+
+=======================================================================
are routed to IPIC, and for 85xx/86xx cpu the interrupts are routed
to MPIC.
+Optional properties:
+- msi-address-64: 64-bit PCI address of the MSIIR register. The MSIIR register
+ is used for MSI messaging. The address of MSIIR in PCI address space is
+ the MSI message address.
+
+ This property may be used in virtualized environments where the hypervisor
+ has created an alternate mapping for the MSIR block. See below for an
+ explanation.
+
+
Example:
msi@41600 {
compatible = "fsl,mpc8610-msi", "fsl,mpic-msi";
0xe7 0>;
interrupt-parent = <&mpic>;
};
+
+The Freescale hypervisor and msi-address-64
+-------------------------------------------
+Normally, PCI devices have access to all of CCSR via an ATMU mapping. The
+Freescale MSI driver calculates the address of MSIIR (in the MSI register
+block) and sets that address as the MSI message address.
+
+In a virtualized environment, the hypervisor may need to create an IOMMU
+mapping for MSIIR. The Freescale ePAPR hypervisor has this requirement
+because of hardware limitations of the Peripheral Access Management Unit
+(PAMU), which is currently the only IOMMU that the hypervisor supports.
+The ATMU is programmed with the guest physical address, and the PAMU
+intercepts transactions and reroutes them to the true physical address.
+
+In the PAMU, each PCI controller is given only one primary window. The
+PAMU restricts DMA operations so that they can only occur within a window.
+Because PCI devices must be able to DMA to memory, the primary window must
+be used to cover all of the guest's memory space.
+
+PAMU primary windows can be divided into 256 subwindows, and each
+subwindow can have its own address mapping ("guest physical" to "true
+physical"). However, each subwindow has to have the same alignment, which
+means they cannot be located at just any address. Because of these
+restrictions, it is usually impossible to create a 4KB subwindow that
+covers MSIIR where it's normally located.
+
+Therefore, the hypervisor has to create a subwindow inside the same
+primary window used for memory, but mapped to the MSIR block (where MSIIR
+lives). The first subwindow after the end of guest memory is used for
+this. The address specified in the msi-address-64 property is the PCI
+address of MSIIR. The hypervisor configures the PAMU to map that address to
+the true physical address of MSIIR.
default FALSE
min_pmtu - INTEGER
- default 562 - minimum discovered Path MTU
+ default 552 - minimum discovered Path MTU
route/max_size - INTEGER
Maximum number of routes allowed in the kernel. Increase
12: 'I' if the kernel is working around a severe bug in the platform
firmware (BIOS or similar).
+ 13: 'O' if an externally-built ("out-of-tree") module has been loaded.
+
The primary reason for the 'Tainted: ' string is to tell kernel
debuggers if this is a clean kernel or if anything unusual has
occurred. Tainting is permanent: even if an offending module is
either wakes them up, if they are kernel threads, or sends fake signals to them,
if they are user space processes. A task that has TIF_FREEZE set, should react
to it by calling the function called refrigerator() (defined in
-kernel/power/process.c), which sets the task's PF_FROZEN flag, changes its state
+kernel/freezer.c), which sets the task's PF_FROZEN flag, changes its state
to TASK_UNINTERRUPTIBLE and makes it loop until PF_FROZEN is cleared for it.
Then, we say that the task is 'frozen' and therefore the set of functions
handling this mechanism is referred to as 'the freezer' (these functions are
-defined in kernel/power/process.c and include/linux/freezer.h). User space
-processes are generally frozen before kernel threads.
+defined in kernel/power/process.c, kernel/freezer.c & include/linux/freezer.h).
+User space processes are generally frozen before kernel threads.
It is not recommended to call refrigerator() directly. Instead, it is
recommended to use the try_to_freeze() function (defined in
additional memory and we prevent them from doing that by freezing them earlier.
[Of course, this also means that device drivers should not allocate substantial
amounts of memory from their .suspend() callbacks before hibernation, but this
-is e separate issue.]
+is a separate issue.]
3. The third reason is to prevent user space processes and some kernel threads
from interfering with the suspending and resuming of devices. A user space
Similarly, if the power.use_autosuspend field isn't set then the autosuspend
helper functions will behave just like the non-autosuspend counterparts.
+Under some circumstances a driver or subsystem may want to prevent a device
+from autosuspending immediately, even though the usage counter is zero and the
+autosuspend delay time has expired. If the ->runtime_suspend() callback
+returns -EAGAIN or -EBUSY, and if the next autosuspend delay expiration time is
+in the future (as it normally would be if the callback invoked
+pm_runtime_mark_last_busy()), the PM core will automatically reschedule the
+autosuspend. The ->runtime_suspend() callback can't do this rescheduling
+itself because no suspend requests of any kind are accepted while the device is
+suspending (i.e., while the callback is running).
+
The implementation is well suited for asynchronous use in interrupt contexts.
However such use inevitably involves races, because the PM core can't
synchronize ->runtime_suspend() callbacks with the arrival of I/O requests.
ref Reference board
mic-ref Reference board with power management for ports
dell-s14 Dell laptop
+ dell-vostro-3500 Dell Vostro 3500 laptop
hp HP laptops with (inverted) mute-LED
hp-dv7-4000 HP dv-7 4000
auto BIOS setup (default)
~~~~~~~~~~~~~~~~
The latest development codes for HD-audio are found on sound git tree:
-- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
+- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
The master branch or for-next branches can be used as the main
development branches in general while the HD-audio specific patches
install(-modules). See INSTALL in the package. The snapshot tarballs
are found at:
-- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/
+- ftp://ftp.suse.com/pub/people/tiwai/snapshot/
Sending a Bug Report
The hda-verb program is found in the ftp directory:
-- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/misc/
+- ftp://ftp.suse.com/pub/people/tiwai/misc/
Also a git repository is available:
The package is found in:
-- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/misc/
+- ftp://ftp.suse.com/pub/people/tiwai/misc/
A git repository is available:
--- /dev/null
+Converting old watchdog drivers to the watchdog framework
+by Wolfram Sang <w.sang@pengutronix.de>
+=========================================================
+
+Before the watchdog framework came into the kernel, every driver had to
+implement the API on its own. Now, as the framework factored out the common
+components, those drivers can be lightened making it a user of the framework.
+This document shall guide you for this task. The necessary steps are described
+as well as things to look out for.
+
+
+Remove the file_operations struct
+---------------------------------
+
+Old drivers define their own file_operations for actions like open(), write(),
+etc... These are now handled by the framework and just call the driver when
+needed. So, in general, the 'file_operations' struct and assorted functions can
+go. Only very few driver-specific details have to be moved to other functions.
+Here is a overview of the functions and probably needed actions:
+
+- open: Everything dealing with resource management (file-open checks, magic
+ close preparations) can simply go. Device specific stuff needs to go to the
+ driver specific start-function. Note that for some drivers, the start-function
+ also serves as the ping-function. If that is the case and you need start/stop
+ to be balanced (clocks!), you are better off refactoring a separate start-function.
+
+- close: Same hints as for open apply.
+
+- write: Can simply go, all defined behaviour is taken care of by the framework,
+ i.e. ping on write and magic char ('V') handling.
+
+- ioctl: While the driver is allowed to have extensions to the IOCTL interface,
+ the most common ones are handled by the framework, supported by some assistance
+ from the driver:
+
+ WDIOC_GETSUPPORT:
+ Returns the mandatory watchdog_info struct from the driver
+
+ WDIOC_GETSTATUS:
+ Needs the status-callback defined, otherwise returns 0
+
+ WDIOC_GETBOOTSTATUS:
+ Needs the bootstatus member properly set. Make sure it is 0 if you
+ don't have further support!
+
+ WDIOC_SETOPTIONS:
+ No preparations needed
+
+ WDIOC_KEEPALIVE:
+ If wanted, options in watchdog_info need to have WDIOF_KEEPALIVEPING
+ set
+
+ WDIOC_SETTIMEOUT:
+ Options in watchdog_info need to have WDIOF_SETTIMEOUT set
+ and a set_timeout-callback has to be defined. The core will also
+ do limit-checking, if min_timeout and max_timeout in the watchdog
+ device are set. All is optional.
+
+ WDIOC_GETTIMEOUT:
+ No preparations needed
+
+ Other IOCTLs can be served using the ioctl-callback. Note that this is mainly
+ intended for porting old drivers; new drivers should not invent private IOCTLs.
+ Private IOCTLs are processed first. When the callback returns with
+ -ENOIOCTLCMD, the IOCTLs of the framework will be tried, too. Any other error
+ is directly given to the user.
+
+Example conversion:
+
+-static const struct file_operations s3c2410wdt_fops = {
+- .owner = THIS_MODULE,
+- .llseek = no_llseek,
+- .write = s3c2410wdt_write,
+- .unlocked_ioctl = s3c2410wdt_ioctl,
+- .open = s3c2410wdt_open,
+- .release = s3c2410wdt_release,
+-};
+
+Check the functions for device-specific stuff and keep it for later
+refactoring. The rest can go.
+
+
+Remove the miscdevice
+---------------------
+
+Since the file_operations are gone now, you can also remove the 'struct
+miscdevice'. The framework will create it on watchdog_dev_register() called by
+watchdog_register_device().
+
+-static struct miscdevice s3c2410wdt_miscdev = {
+- .minor = WATCHDOG_MINOR,
+- .name = "watchdog",
+- .fops = &s3c2410wdt_fops,
+-};
+
+
+Remove obsolete includes and defines
+------------------------------------
+
+Because of the simplifications, a few defines are probably unused now. Remove
+them. Includes can be removed, too. For example:
+
+- #include <linux/fs.h>
+- #include <linux/miscdevice.h> (if MODULE_ALIAS_MISCDEV is not used)
+- #include <linux/uaccess.h> (if no custom IOCTLs are used)
+
+
+Add the watchdog operations
+---------------------------
+
+All possible callbacks are defined in 'struct watchdog_ops'. You can find it
+explained in 'watchdog-kernel-api.txt' in this directory. start(), stop() and
+owner must be set, the rest are optional. You will easily find corresponding
+functions in the old driver. Note that you will now get a pointer to the
+watchdog_device as a parameter to these functions, so you probably have to
+change the function header. Other changes are most likely not needed, because
+here simply happens the direct hardware access. If you have device-specific
+code left from the above steps, it should be refactored into these callbacks.
+
+Here is a simple example:
+
++static struct watchdog_ops s3c2410wdt_ops = {
++ .owner = THIS_MODULE,
++ .start = s3c2410wdt_start,
++ .stop = s3c2410wdt_stop,
++ .ping = s3c2410wdt_keepalive,
++ .set_timeout = s3c2410wdt_set_heartbeat,
++};
+
+A typical function-header change looks like:
+
+-static void s3c2410wdt_keepalive(void)
++static int s3c2410wdt_keepalive(struct watchdog_device *wdd)
+ {
+...
++
++ return 0;
+ }
+
+...
+
+- s3c2410wdt_keepalive();
++ s3c2410wdt_keepalive(&s3c2410_wdd);
+
+
+Add the watchdog device
+-----------------------
+
+Now we need to create a 'struct watchdog_device' and populate it with the
+necessary information for the framework. The struct is also explained in detail
+in 'watchdog-kernel-api.txt' in this directory. We pass it the mandatory
+watchdog_info struct and the newly created watchdog_ops. Often, old drivers
+have their own record-keeping for things like bootstatus and timeout using
+static variables. Those have to be converted to use the members in
+watchdog_device. Note that the timeout values are unsigned int. Some drivers
+use signed int, so this has to be converted, too.
+
+Here is a simple example for a watchdog device:
+
++static struct watchdog_device s3c2410_wdd = {
++ .info = &s3c2410_wdt_ident,
++ .ops = &s3c2410wdt_ops,
++};
+
+
+Register the watchdog device
+----------------------------
+
+Replace misc_register(&miscdev) with watchdog_register_device(&watchdog_dev).
+Make sure the return value gets checked and the error message, if present,
+still fits. Also convert the unregister case.
+
+- ret = misc_register(&s3c2410wdt_miscdev);
++ ret = watchdog_register_device(&s3c2410_wdd);
+
+...
+
+- misc_deregister(&s3c2410wdt_miscdev);
++ watchdog_unregister_device(&s3c2410_wdd);
+
+
+Update the Kconfig-entry
+------------------------
+
+The entry for the driver now needs to select WATCHDOG_CORE:
+
++ select WATCHDOG_CORE
+
+
+Create a patch and send it to upstream
+--------------------------------------
+
+Make sure you understood Documentation/SubmittingPatches and send your patch to
+linux-watchdog@vger.kernel.org. We are looking forward to it :)
+
# 3) Check for missing system calls
#
+always += missing-syscalls
+targets += missing-syscalls
+
quiet_cmd_syscalls = CALL $<
- cmd_syscalls = $(CONFIG_SHELL) $< $(CC) $(c_flags)
+ cmd_syscalls = $(CONFIG_SHELL) $< $(CC) $(c_flags) $(missing_syscalls_flags)
-PHONY += missing-syscalls
-missing-syscalls: scripts/checksyscalls.sh FORCE
+missing-syscalls: scripts/checksyscalls.sh $(offsets-file) FORCE
$(call cmd,syscalls)
# Keep these two files during make clean
F: arch/arm/include/asm/hardware/iomd.h
F: arch/arm/include/asm/hardware/memc.h
F: arch/arm/mach-rpc/
+F: drivers/net/ethernet/8390/etherh.c
F: drivers/net/ethernet/i825xx/ether1*
F: drivers/net/ethernet/seeq/ether3*
F: drivers/scsi/arm/
ARM/SAMSUNG S5P SERIES Multi Format Codec (MFC) SUPPORT
M: Kyungmin Park <kyungmin.park@samsung.com>
M: Kamil Debski <k.debski@samsung.com>
+M: Jeongtae Park <jtp.park@samsung.com>
L: linux-arm-kernel@lists.infradead.org
L: linux-media@vger.kernel.org
S: Maintained
F: drivers/connector/
CONTROL GROUPS (CGROUPS)
-M: Paul Menage <paul@paulmenage.org>
+M: Tejun Heo <tj@kernel.org>
M: Li Zefan <lizf@cn.fujitsu.com>
L: containers@lists.linux-foundation.org
+L: cgroups@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup.git
S: Maintained
F: include/linux/cgroup*
F: kernel/cgroup*
F: drivers/gpu/drm/i915
F: include/drm/i915*
+DRM DRIVERS FOR EXYNOS
+M: Inki Dae <inki.dae@samsung.com>
+L: dri-devel@lists.freedesktop.org
+S: Supported
+F: drivers/gpu/drm/exynos
+F: include/drm/exynos*
+
DSCC4 DRIVER
M: Francois Romieu <romieu@fr.zoreil.com>
L: netdev@vger.kernel.org
F: net/bridge/netfilter/ebt*.c
ECRYPT FILE SYSTEM
-M: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
+M: Tyler Hicks <tyhicks@canonical.com>
M: Dustin Kirkland <kirkland@canonical.com>
L: ecryptfs@vger.kernel.org
W: https://launchpad.net/ecryptfs
F: drivers/net/ethernet/i825xx/eexpress.*
ETHERNET BRIDGE
-M: Stephen Hemminger <shemminger@linux-foundation.org>
+M: Stephen Hemminger <shemminger@vyatta.com>
L: bridge@lists.linux-foundation.org
L: netdev@vger.kernel.org
W: http://www.linuxfoundation.org/en/Net:Bridge
M: Balbir Singh <bsingharora@gmail.com>
M: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
M: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
+L: cgroups@vger.kernel.org
L: linux-mm@kvack.org
S: Maintained
F: mm/memcontrol.c
M: Ralf Baechle <ralf@linux-mips.org>
L: linux-mips@linux-mips.org
W: http://www.linux-mips.org/
-T: git git://git.linux-mips.org/pub/scm/linux.git
+T: git git://git.linux-mips.org/pub/scm/ralf/linux.git
Q: http://patchwork.linux-mips.org/project/linux-mips/list/
S: Supported
F: Documentation/mips/
F: drivers/infiniband/hw/nes/
NETEM NETWORK EMULATOR
-M: Stephen Hemminger <shemminger@linux-foundation.org>
+M: Stephen Hemminger <shemminger@vyatta.com>
L: netem@lists.linux-foundation.org
S: Maintained
F: net/sched/sch_netem.c
W: http://www.muru.com/linux/omap/
W: http://linux.omap.com/
Q: http://patchwork.kernel.org/project/linux-omap/list/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git
S: Maintained
F: arch/arm/*omap*/
F: include/linux/ppdev.h
PARAVIRT_OPS INTERFACE
-M: Jeremy Fitzhardinge <jeremy@xensource.com>
+M: Jeremy Fitzhardinge <jeremy@goop.org>
M: Chris Wright <chrisw@sous-sol.org>
M: Alok Kataria <akataria@vmware.com>
M: Rusty Russell <rusty@rustcorp.com.au>
F: drivers/net/ethernet/rdc/r6040.c
RDS - RELIABLE DATAGRAM SOCKETS
-M: Andy Grover <andy.grover@oracle.com>
+M: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
L: rds-devel@oss.oracle.com (moderated for non-subscribers)
S: Supported
F: net/rds/
F: drivers/usb/misc/sisusbvga/
SKGE, SKY2 10/100/1000 GIGABIT ETHERNET DRIVERS
-M: Stephen Hemminger <shemminger@linux-foundation.org>
+M: Stephen Hemminger <shemminger@vyatta.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/marvell/sk*
SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
M: Liam Girdwood <lrg@ti.com>
M: Mark Brown <broonie@opensource.wolfsonmicro.com>
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
W: http://alsa-project.org/main/index.php/ASoC
S: Supported
F: arch/x86/kernel/cpu/mcheck/*
XEN HYPERVISOR INTERFACE
-M: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
M: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+M: Jeremy Fitzhardinge <jeremy@goop.org>
L: xen-devel@lists.xensource.com (moderated for non-subscribers)
L: virtualization@lists.linux-foundation.org
S: Supported
XFS FILESYSTEM
P: Silicon Graphics Inc
-M: Alex Elder <aelder@sgi.com>
+M: Ben Myers <bpm@sgi.com>
+M: Alex Elder <elder@kernel.org>
M: xfs-masters@oss.sgi.com
L: xfs@oss.sgi.com
W: http://oss.sgi.com/projects/xfs
VERSION = 3
-PATCHLEVEL = 1
+PATCHLEVEL = 2
SUBLEVEL = 0
-EXTRAVERSION =
-NAME = "Divemaster Edition"
+EXTRAVERSION = -rc2
+NAME = Saber-toothed Squirrel
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
prepare0: archprepare FORCE
$(Q)$(MAKE) $(build)=.
- $(Q)$(MAKE) $(build)=. missing-syscalls
# All the preparing..
prepare: prepare0
@find $(srctree) $(RCS_FIND_IGNORE) \
\( -name '*.orig' -o -name '*.rej' -o -name '*~' \
-o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
- -o -name '.*.rej' -o -size 0 \
+ -o -name '.*.rej' \
-o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \
-type f -print | xargs rm -f
@echo ' 2: warnings which occur quite often but may still be relevant'
@echo ' 3: more obscure warnings, can most likely be ignored'
@echo ' Multiple levels can be combined with W=12 or W=123'
- @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
@echo ''
@echo 'Execute "make" or "make all" to build all targets marked with [*] '
@echo 'For further info see the ./README file'
Is this a machine based on the EV67 core? If in doubt, select N here
and the machine will be treated as an EV6.
-config ALPHA_EV7
- bool
- depends on ALPHA_MARVEL
- default y
-
config ALPHA_MCPCIA
bool
depends on ALPHA_RAWHIDE
#include <linux/vmalloc.h>
#include <linux/agp_backend.h>
#include <linux/agpgart.h>
+#include <linux/export.h>
#include <asm/pgalloc.h>
#define GET_PAGE_DIR_OFF(addr) (addr >> 22)
*/
#include <linux/sched.h>
+#include <linux/stat.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/pci.h>
#include <linux/gfp.h>
#include <linux/bootmem.h>
+#include <linux/export.h>
#include <linux/scatterlist.h>
#include <linux/log2.h>
#include <linux/dma-mapping.h>
#include <asm/setup.h>
#include <asm/io.h>
#include <linux/log2.h>
+#include <linux/export.h>
extern struct atomic_notifier_head panic_notifier_list;
static int alpha_panic_event(struct notifier_block *, unsigned long, void *);
select TICK_ONESHOT
select PLAT_PXA
select SPARSE_IRQ
+ select GENERIC_ALLOCATOR
help
Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
select CPU_V6
select ARM_VIC
select HAVE_CLK
+ select HAVE_TCM
select CLKDEV_LOOKUP
select NO_IOPORT
select ARCH_USES_GETTIMEOFFSET
select SAMSUNG_CLKSRC
select SAMSUNG_IRQ_VIC_TIMER
select S3C_GPIO_TRACK
- select S3C_GPIO_PULL_UPDOWN
- select S3C_GPIO_CFG_S3C24XX
- select S3C_GPIO_CFG_S3C64XX
select S3C_DEV_NAND
select USB_ARCH_HAS_OHCI
select SAMSUNG_GPIOLIB_4BIT
help
Samsung S5PV210/S5PC110 series based systems
-config ARCH_EXYNOS4
- bool "Samsung EXYNOS4"
+config ARCH_EXYNOS
+ bool "SAMSUNG EXYNOS"
select CPU_V7
select ARCH_SPARSEMEM_ENABLE
select ARCH_HAS_HOLES_MEMORYMODEL
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select NEED_MACH_MEMORY_H
help
- Samsung EXYNOS4 series based systems
+ Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
config ARCH_SHARK
bool "Shark"
source "arch/arm/mach-s5pv210/Kconfig"
-source "arch/arm/mach-exynos4/Kconfig"
+source "arch/arm/mach-exynos/Kconfig"
source "arch/arm/mach-shmobile/Kconfig"
source "kernel/power/Kconfig"
config ARCH_SUSPEND_POSSIBLE
- depends on !ARCH_S5P64X0 && !ARCH_S5PC100
+ depends on !ARCH_S5PC100
depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \
CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE
def_bool y
machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0
machine-$(CONFIG_ARCH_S5PC100) := s5pc100
machine-$(CONFIG_ARCH_S5PV210) := s5pv210
-machine-$(CONFIG_ARCH_EXYNOS4) := exynos4
+machine-$(CONFIG_ARCH_EXYNOS4) := exynos
machine-$(CONFIG_ARCH_SA1100) := sa1100
machine-$(CONFIG_ARCH_SHARK) := shark
machine-$(CONFIG_ARCH_SHMOBILE) := shmobile
$(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y))
+clean-files := *.dtb
+
quiet_cmd_uimage = UIMAGE $@
cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \
-C none -a $(LOADADDR) -e $(STARTADDR) \
sdhci@c8000400 {
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
- power-gpios = <&gpio 155 0>; /* gpio PT3 */
+ power-gpios = <&gpio 70 0>; /* gpio PI6 */
};
sdhci@c8000600 {
- power-gpios = <&gpio 70 0>; /* gpio PI6 */
support-8bit;
};
};
#include <linux/ioport.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <linux/export.h>
#include <asm/mach/pci.h>
#include <asm/hardware/it8152.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
+#include <linux/export.h>
#include <linux/io.h>
#include <asm/hardware/scoop.h>
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_EXYNOS4=y
+CONFIG_ARCH_EXYNOS=y
CONFIG_S3C_LOWLEVEL_UART_PORT=1
CONFIG_MACH_SMDKC210=y
-CONFIG_MACH_SMDKV310=y
CONFIG_MACH_ARMLEX4210=y
CONFIG_MACH_UNIVERSAL_C210=y
CONFIG_MACH_NURI=y
CONFIG_MACH_ORIGEN=y
+CONFIG_MACH_SMDK4412=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
-CONFIG_HOTPLUG_CPU=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y
-CONFIG_DEBUG_S3C_UART=1
CONFIG_CRC_CCITT=y
#ifndef __ASM_ARM_HARDWARE_L2X0_H
#define __ASM_ARM_HARDWARE_L2X0_H
+#include <linux/errno.h>
+
#define L2X0_CACHE_ID 0x000
#define L2X0_CACHE_TYPE 0x004
#define L2X0_CTRL 0x100
struct tag;
struct meminfo;
struct sys_timer;
+struct pt_regs;
struct machine_desc {
unsigned int nr; /* architecture number */
#define __NR_syncfs (__NR_SYSCALL_BASE+373)
#define __NR_sendmmsg (__NR_SYSCALL_BASE+374)
#define __NR_setns (__NR_SYSCALL_BASE+375)
+#define __NR_process_vm_readv (__NR_SYSCALL_BASE+376)
+#define __NR_process_vm_writev (__NR_SYSCALL_BASE+377)
/*
* The following SWIs are ARM private.
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/sched.h>
#include <linux/string.h>
#include <linux/cryptohash.h>
*
* Bits taken from various places.
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/slab.h>
CALL(sys_syncfs)
CALL(sys_sendmmsg)
/* 375 */ CALL(sys_setns)
+ CALL(sys_process_vm_readv)
+ CALL(sys_process_vm_writev)
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted
*/
#include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/bootmem.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/sched.h>
#include <linux/personality.h>
#include <linux/binfmts.h>
#include <linux/miscdevice.h>
#include <linux/vmalloc.h>
#include <linux/mutex.h>
+#include <linux/module.h>
#include <asm/hardware/coresight.h>
#include <asm/sections.h>
* r13 = *virtual* address to jump to upon completion
*/
__enable_mmu:
-#ifdef CONFIG_ALIGNMENT_TRAP
+#if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6
orr r0, r0, #CR_A
#else
bic r0, r0, #CR_A
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/types.h>
#include <linux/io.h>
* Naturally it's not a 1:1 relation, but there are similarities.
*/
#include <linux/kernel_stat.h>
-#include <linux/module.h>
#include <linux/signal.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/sysdev.h>
#include <linux/syscore_ops.h>
+#include <linux/string.h>
#include <asm/leds.h>
int machine_kexec_prepare(struct kimage *image)
{
- unsigned long page_list;
- void *reboot_code_buffer;
- page_list = image->head & PAGE_MASK;
-
- reboot_code_buffer = page_address(image->control_code_page);
-
- /* Prepare parameters for reboot_code_buffer*/
- kexec_start_address = image->start;
- kexec_indirection_page = page_list;
- kexec_mach_type = machine_arch_type;
- kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET;
-
- /* copy our kernel relocation code to the control code page */
- memcpy(reboot_code_buffer,
- relocate_new_kernel, relocate_new_kernel_size);
-
- flush_icache_range((unsigned long) reboot_code_buffer,
- (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
return 0;
}
void machine_kexec(struct kimage *image)
{
+ unsigned long page_list;
unsigned long reboot_code_buffer_phys;
void *reboot_code_buffer;
+
+ page_list = image->head & PAGE_MASK;
+
/* we need both effective and real address here */
reboot_code_buffer_phys =
page_to_pfn(image->control_code_page) << PAGE_SHIFT;
reboot_code_buffer = page_address(image->control_code_page);
+ /* Prepare parameters for reboot_code_buffer*/
+ kexec_start_address = image->start;
+ kexec_indirection_page = page_list;
+ kexec_mach_type = machine_arch_type;
+ kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET;
+
+ /* copy our kernel relocation code to the control code page */
+ memcpy(reboot_code_buffer,
+ relocate_new_kernel, relocate_new_kernel_size);
+
+
+ flush_icache_range((unsigned long) reboot_code_buffer,
+ (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
printk(KERN_INFO "Bye!\n");
if (kexec_reinit)
#include <linux/bitmap.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/perf_event.h>
#include <linux/platform_device.h>
#include <linux/spinlock.h>
* published by the Free Software Foundation.
*/
-#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/signal.h>
*/
#include <stdarg.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/mm.h>
+#include <linux/elf.h>
#include <linux/smp.h>
#include <linux/ptrace.h>
#include <linux/user.h>
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/ftrace.h>
#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/stddef.h>
#include <linux/ioport.h>
cpu_name, read_cpuid_id(), read_cpuid_id() & 15,
proc_arch[cpu_architecture()], cr_alignment);
- sprintf(init_utsname()->machine, "%s%c", list->arch_name, ENDIANNESS);
- sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS);
+ snprintf(init_utsname()->machine, __NEW_UTS_LEN + 1, "%s%c",
+ list->arch_name, ENDIANNESS);
+ snprintf(elf_platform, ELF_PLATFORM_SIZE, "%s%c",
+ list->elf_name, ENDIANNESS);
elf_hwcap = list->elf_hwcap;
#ifndef CONFIG_ARM_THUMB
elf_hwcap &= ~HWCAP_THUMB;
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/sched.h>
#include <linux/stacktrace.h>
* have a non-standard calling sequence on the Linux/arm
* platform.
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/mm.h>
* This file contains the ARM-specific time handling details:
* reading the RTC at bootup, etc...
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/time.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
* published by the Free Software Foundation.
*/
-#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/signal.h>
comment "AT91SAM9260 Variants"
-config ARCH_AT91SAM9260_SAM9XE
- bool "AT91SAM9XE"
- help
- Select this if you are using Atmel's AT91SAM9XE System-on-Chip.
- They are basically AT91SAM9260s with various sizes of embedded Flash.
-
comment "AT91SAM9260 / AT91SAM9XE Board Type"
config MACH_AT91SAM9260EK
* USB HS Device (Gadget)
* -------------------------------------------------------------------- */
-#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
static struct resource usba_udc_resources[] = {
[0] = {
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
- .start = AT91_VA_BASE_SYS + AT91_DBGU,
- .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .start = AT91_BASE_SYS + AT91_DBGU,
+ .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
- .start = AT91_VA_BASE_SYS + AT91_DBGU,
- .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .start = AT91_BASE_SYS + AT91_DBGU,
+ .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
- .start = AT91_VA_BASE_SYS + AT91_DBGU,
- .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .start = AT91_BASE_SYS + AT91_DBGU,
+ .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
- .start = AT91_VA_BASE_SYS + AT91_DBGU,
- .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .start = AT91_BASE_SYS + AT91_DBGU,
+ .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
static struct resource dbgu_resources[] = {
[0] = {
- .start = AT91_VA_BASE_SYS + AT91_DBGU,
- .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .start = AT91_BASE_SYS + AT91_DBGU,
+ .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
* USB HS Device (Gadget)
* -------------------------------------------------------------------- */
-#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
static struct resource usba_udc_resources[] = {
[0] = {
.start = AT91SAM9G45_UDPHS_FIFO,
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
- .start = AT91_VA_BASE_SYS + AT91_DBGU,
- .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .start = AT91_BASE_SYS + AT91_DBGU,
+ .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0,
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
* USB HS Device (Gadget)
* -------------------------------------------------------------------- */
-#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
static struct resource usba_udc_resources[] = {
[0] = {
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
- .start = AT91_VA_BASE_SYS + AT91_DBGU,
- .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .start = AT91_BASE_SYS + AT91_DBGU,
+ .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(afeb9260_nand_partition);
- return afeb9260_nand_partition;
-}
-
static struct atmel_nand_data __initdata afeb9260_nand_data = {
.ale = 21,
.cle = 22,
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
- .partition_info = nand_partitions,
.bus_width_16 = 0,
+ .parts = afeb9260_nand_partition,
+ .num_parts = ARRAY_SIZE(afeb9260_nand_partition),
};
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(cam60_nand_partition);
- return cam60_nand_partition;
-}
-
static struct atmel_nand_data __initdata cam60_nand_data = {
.ale = 21,
.cle = 22,
// .det_pin = ... not there
.rdy_pin = AT91_PIN_PA9,
.enable_pin = AT91_PIN_PA7,
- .partition_info = nand_partitions,
+ .parts = cam60_nand_partition,
+ .num_parts = ARRAY_SIZE(cam60_nand_partition),
};
static struct sam9_smc_config __initdata cam60_nand_smc_config = {
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(cap9adk_nand_partitions);
- return cap9adk_nand_partitions;
-}
-
static struct atmel_nand_data __initdata cap9adk_nand_data = {
.ale = 21,
.cle = 22,
// .det_pin = ... not connected
// .rdy_pin = ... not connected
.enable_pin = AT91_PIN_PD15,
- .partition_info = nand_partitions,
+ .parts = cap9adk_nand_partitions,
+ .num_parts = ARRAY_SIZE(cap9adk_nand_partitions),
};
static struct sam9_smc_config __initdata cap9adk_nand_smc_config = {
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(kb9202_nand_partition);
- return kb9202_nand_partition;
-}
-
static struct atmel_nand_data __initdata kb9202_nand_data = {
.ale = 22,
.cle = 21,
// .det_pin = ... not there
.rdy_pin = AT91_PIN_PC29,
.enable_pin = AT91_PIN_PC28,
- .partition_info = nand_partitions,
+ .parts = kb9202_nand_partition,
+ .num_parts = ARRAY_SIZE(kb9202_nand_partition),
};
static void __init kb9202_board_init(void)
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(neocore926_nand_partition);
- return neocore926_nand_partition;
-}
-
static struct atmel_nand_data __initdata neocore926_nand_data = {
.ale = 21,
.cle = 22,
.rdy_pin = AT91_PIN_PB19,
.rdy_pin_active_low = 1,
.enable_pin = AT91_PIN_PD15,
- .partition_info = nand_partitions,
+ .parts = neocore926_nand_partition,
+ .num_parts = ARRAY_SIZE(neocore926_nand_partition),
};
static struct sam9_smc_config __initdata neocore926_nand_smc_config = {
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
// .det_pin = ... not connected
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
- .partition_info = nand_partitions,
+ .parts = ek_nand_partition,
+ .num_parts = ARRAY_SIZE(ek_nand_partition),
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(dk_nand_partition);
- return dk_nand_partition;
-}
-
static struct atmel_nand_data __initdata dk_nand_data = {
.ale = 22,
.cle = 21,
.det_pin = AT91_PIN_PB1,
.rdy_pin = AT91_PIN_PC2,
// .enable_pin = ... not there
- .partition_info = nand_partitions,
+ .parts = dk_nand_partition,
+ .num_parts = ARRAY_SIZE(dk_nand_partition),
};
#define DK_FLASH_BASE AT91_CHIPSELECT_0
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
// .det_pin = ... not connected
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
- .partition_info = nand_partitions,
+ .parts = ek_nand_partition,
+ .num_parts = ARRAY_SIZE(ek_nand_partition),
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
// .det_pin = ... not connected
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
- .partition_info = nand_partitions,
+ .parts = ek_nand_partition,
+ .num_parts = ARRAY_SIZE(ek_nand_partition),
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 22,
.cle = 21,
// .det_pin = ... not connected
.rdy_pin = AT91_PIN_PC15,
.enable_pin = AT91_PIN_PC14,
- .partition_info = nand_partitions,
+ .parts = ek_nand_partition,
+ .num_parts = ARRAY_SIZE(ek_nand_partition),
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
// .det_pin = ... not connected
.rdy_pin = AT91_PIN_PA22,
.enable_pin = AT91_PIN_PD15,
- .partition_info = nand_partitions,
+ .parts = ek_nand_partition,
+ .num_parts = ARRAY_SIZE(ek_nand_partition),
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
/* det_pin is not connected */
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
- .partition_info = nand_partitions,
+ .parts = ek_nand_partition,
+ .num_parts = ARRAY_SIZE(ek_nand_partition),
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
/* det_pin is not connected */
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
.rdy_pin = AT91_PIN_PC8,
.enable_pin = AT91_PIN_PC14,
- .partition_info = nand_partitions,
+ .parts = ek_nand_partition,
+ .num_parts = ARRAY_SIZE(ek_nand_partition),
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
},
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
// .det_pin = ... not connected
.rdy_pin = AT91_PIN_PD17,
.enable_pin = AT91_PIN_PB6,
- .partition_info = nand_partitions,
+ .parts = ek_nand_partition,
+ .num_parts = ARRAY_SIZE(ek_nand_partition),
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
},
};
-static struct mtd_partition * __init
-snapper9260_nand_partition_info(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(snapper9260_nand_partitions);
- return snapper9260_nand_partitions;
-}
-
static struct atmel_nand_data __initdata snapper9260_nand_data = {
.ale = 21,
.cle = 22,
.rdy_pin = AT91_PIN_PC13,
- .partition_info = snapper9260_nand_partition_info,
+ .parts = snapper9260_nand_partitions,
+ .num_parts = ARRAY_SIZE(snapper9260_nand_partitions),
.bus_width_16 = 0,
};
}
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
// .det_pin = ... not connected
.rdy_pin = AT91_PIN_PA22,
.enable_pin = AT91_PIN_PD15,
- .partition_info = nand_partitions,
+ .parts = ek_nand_partition,
+ .num_parts = ARRAY_SIZE(ek_nand_partition),
};
static struct sam9_smc_config __initdata usb_a9260_nand_smc_config = {
}
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(yl9200_nand_partition);
- return yl9200_nand_partition;
-}
-
static struct atmel_nand_data __initdata yl9200_nand_data = {
.ale = 6,
.cle = 7,
// .det_pin = ... not connected
.rdy_pin = AT91_PIN_PC14, /* R/!B (Sheet10) */
.enable_pin = AT91_PIN_PC15, /* !CE (Sheet10) */
- .partition_info = nand_partitions,
+ .parts = yl9200_nand_partition,
+ .num_parts = ARRAY_SIZE(yl9200_nand_partition),
};
/*
#include <video/s1d13xxxfb.h>
-static void __init yl9200_init_video(void)
+static void yl9200_init_video(void)
{
/* NWAIT Signal */
at91_set_A_periph(AT91_PIN_PC6, 0);
#include <linux/cpuidle.h>
#include <asm/proc-fns.h>
#include <linux/io.h>
+#include <linux/export.h>
#include "pm.h"
/* Actual code that puts the SoC in different idle states */
static int at91_enter_idle(struct cpuidle_device *dev,
- struct cpuidle_state *state)
+ struct cpuidle_driver *drv,
+ int index)
{
struct timeval before, after;
int idle_time;
local_irq_disable();
do_gettimeofday(&before);
- if (state == &dev->states[0])
+ if (index == 0)
/* Wait for interrupt state */
cpu_do_idle();
- else if (state == &dev->states[1]) {
+ else if (index == 1) {
asm("b 1f; .align 5; 1:");
asm("mcr p15, 0, r0, c7, c10, 4"); /* drain write buffer */
saved_lpr = sdram_selfrefresh_enable();
local_irq_enable();
idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
(after.tv_usec - before.tv_usec);
- return idle_time;
+
+ dev->last_residency = idle_time;
+ return index;
}
/* Initialize CPU idle by registering the idle states */
static int at91_init_cpuidle(void)
{
struct cpuidle_device *device;
-
- cpuidle_register_driver(&at91_idle_driver);
+ struct cpuidle_driver *driver = &at91_idle_driver;
device = &per_cpu(at91_cpuidle_device, smp_processor_id());
device->state_count = AT91_MAX_STATES;
+ driver->state_count = AT91_MAX_STATES;
/* Wait for interrupt state */
- device->states[0].enter = at91_enter_idle;
- device->states[0].exit_latency = 1;
- device->states[0].target_residency = 10000;
- device->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
- strcpy(device->states[0].name, "WFI");
- strcpy(device->states[0].desc, "Wait for interrupt");
+ driver->states[0].enter = at91_enter_idle;
+ driver->states[0].exit_latency = 1;
+ driver->states[0].target_residency = 10000;
+ driver->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
+ strcpy(driver->states[0].name, "WFI");
+ strcpy(driver->states[0].desc, "Wait for interrupt");
/* Wait for interrupt and RAM self refresh state */
- device->states[1].enter = at91_enter_idle;
- device->states[1].exit_latency = 10;
- device->states[1].target_residency = 10000;
- device->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
- strcpy(device->states[1].name, "RAM_SR");
- strcpy(device->states[1].desc, "WFI and RAM Self Refresh");
+ driver->states[1].enter = at91_enter_idle;
+ driver->states[1].exit_latency = 10;
+ driver->states[1].target_residency = 10000;
+ driver->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
+ strcpy(driver->states[1].name, "RAM_SR");
+ strcpy(driver->states[1].desc, "WFI and RAM Self Refresh");
+
+ cpuidle_register_driver(&at91_idle_driver);
if (cpuidle_register_device(device)) {
printk(KERN_ERR "at91_init_cpuidle: Failed registering\n");
u8 ale; /* address line number connected to ALE */
u8 cle; /* address line number connected to CLE */
u8 bus_width_16; /* buswidth is 16 bit */
- struct mtd_partition* (*partition_info)(int, int*);
+ struct mtd_partition *parts;
+ unsigned int num_parts;
};
extern void __init at91_add_device_nand(struct atmel_nand_data *data);
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H
+#include <mach/hardware.h>
+
#define VMALLOC_END (AT91_VIRT_BASE & PGDIR_MASK)
#endif
*/
bcmring_clocksource_init();
- sp804_clockevents_register(TIMER0_VA_BASE, IRQ_TIMER0, "timer0");
+ sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMER0, "timer0");
}
struct sys_timer bcmring_timer = {
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
+#include <linux/sched.h>
#include <linux/irqreturn.h>
#include <linux/proc_fs.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/pfn.h>
#include <linux/atomic.h>
+#include <linux/sched.h>
#include <mach/dma.h>
/* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <asm/page.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
.nr_parts = ARRAY_SIZE(da830_evm_nand_partitions),
.ecc_mode = NAND_ECC_HW,
.ecc_bits = 4,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
.bbt_td = &da830_evm_nand_bbt_main_descr,
.bbt_md = &da830_evm_nand_bbt_mirror_descr,
.timing = &da830_evm_nandflash_timing,
.nr_parts = ARRAY_SIZE(da850_evm_nandflash_partition),
.ecc_mode = NAND_ECC_HW,
.ecc_bits = 4,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
.timing = &da850_evm_nandflash_timing,
};
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
.ecc_mode = NAND_ECC_HW,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
.ecc_bits = 4,
};
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
.ecc_mode = NAND_ECC_HW_SYNDROME,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
};
static struct resource davinci_nand_resources[] = {
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
.ecc_mode = NAND_ECC_HW,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
.ecc_bits = 4,
};
#include <linux/phy.h>
#include <linux/clk.h>
#include <linux/videodev2.h>
+#include <linux/export.h>
#include <media/tvp514x.h>
.parts = davinci_evm_nandflash_partition,
.nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition),
.ecc_mode = NAND_ECC_HW,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
.timing = &davinci_evm_nandflash_timing,
};
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/clk.h>
+#include <linux/export.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
.parts = mityomapl138_nandflash_partition,
.nr_parts = ARRAY_SIZE(mityomapl138_nandflash_partition),
.ecc_mode = NAND_ECC_HW,
- .options = NAND_USE_FLASH_BBT | NAND_BUSWIDTH_16,
+ .bbt_options = NAND_BBT_USE_FLASH,
+ .options = NAND_BUSWIDTH_16,
.ecc_bits = 1, /* 4 bit mode is not supported with 16 bit NAND */
};
.parts = davinci_ntosd2_nandflash_partition,
.nr_parts = ARRAY_SIZE(davinci_ntosd2_nandflash_partition),
.ecc_mode = NAND_ECC_HW,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
};
static struct resource davinci_ntosd2_nandflash_resource[] = {
.parts = nand_partitions,
.nr_parts = ARRAY_SIZE(nand_partitions),
.ecc_mode = NAND_ECC_HW,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
.ecc_bits = 1,
};
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
+#include <linux/module.h>
#include <mach/clock.h>
#include <mach/cdce949.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
+#include <linux/export.h>
#include <mach/hardware.h>
#include <mach/cpufreq.h>
#include <linux/platform_device.h>
#include <linux/cpuidle.h>
#include <linux/io.h>
+#include <linux/export.h>
#include <asm/proc-fns.h>
#include <mach/cpuidle.h>
/* Actual code that puts the SoC in different idle states */
static int davinci_enter_idle(struct cpuidle_device *dev,
- struct cpuidle_state *state)
+ struct cpuidle_driver *drv,
+ int index)
{
- struct davinci_ops *ops = cpuidle_get_statedata(state);
+ struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
+ struct davinci_ops *ops = cpuidle_get_statedata(state_usage);
struct timeval before, after;
int idle_time;
local_irq_enable();
idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
(after.tv_usec - before.tv_usec);
- return idle_time;
+
+ dev->last_residency = idle_time;
+
+ return index;
}
static int __init davinci_cpuidle_probe(struct platform_device *pdev)
{
int ret;
struct cpuidle_device *device;
+ struct cpuidle_driver *driver = &davinci_idle_driver;
struct davinci_cpuidle_config *pdata = pdev->dev.platform_data;
device = &per_cpu(davinci_cpuidle_device, smp_processor_id());
ddr2_reg_base = pdata->ddr2_ctlr_base;
- ret = cpuidle_register_driver(&davinci_idle_driver);
- if (ret) {
- dev_err(&pdev->dev, "failed to register driver\n");
- return ret;
- }
-
/* Wait for interrupt state */
- device->states[0].enter = davinci_enter_idle;
- device->states[0].exit_latency = 1;
- device->states[0].target_residency = 10000;
- device->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
- strcpy(device->states[0].name, "WFI");
- strcpy(device->states[0].desc, "Wait for interrupt");
+ driver->states[0].enter = davinci_enter_idle;
+ driver->states[0].exit_latency = 1;
+ driver->states[0].target_residency = 10000;
+ driver->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
+ strcpy(driver->states[0].name, "WFI");
+ strcpy(driver->states[0].desc, "Wait for interrupt");
/* Wait for interrupt and DDR self refresh state */
- device->states[1].enter = davinci_enter_idle;
- device->states[1].exit_latency = 10;
- device->states[1].target_residency = 10000;
- device->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
- strcpy(device->states[1].name, "DDR SR");
- strcpy(device->states[1].desc, "WFI and DDR Self Refresh");
+ driver->states[1].enter = davinci_enter_idle;
+ driver->states[1].exit_latency = 10;
+ driver->states[1].target_residency = 10000;
+ driver->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
+ strcpy(driver->states[1].name, "DDR SR");
+ strcpy(driver->states[1].desc, "WFI and DDR Self Refresh");
if (pdata->ddr2_pdown)
davinci_states[1].flags |= DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN;
- cpuidle_set_statedata(&device->states[1], &davinci_states[1]);
+ cpuidle_set_statedata(&device->states_usage[1], &davinci_states[1]);
device->state_count = DAVINCI_CPUIDLE_MAX_STATES;
+ driver->state_count = DAVINCI_CPUIDLE_MAX_STATES;
+
+ ret = cpuidle_register_driver(&davinci_idle_driver);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register driver\n");
+ return ret;
+ }
ret = cpuidle_register_device(device);
if (ret) {
#include <asm-generic/gpio.h>
+#define __ARM_GPIOLIB_COMPLEX
+
/* The inline versions use the static inlines in the driver header */
#include "gpio-davinci.h"
nand_ecc_modes_t ecc_mode;
u8 ecc_bits;
- /* e.g. NAND_BUSWIDTH_16 or NAND_USE_FLASH_BBT */
+ /* e.g. NAND_BUSWIDTH_16 */
unsigned options;
+ /* e.g. NAND_BBT_USE_FLASH */
+ unsigned bbt_options;
/* Main and mirror bbt descriptor overrides */
struct nand_bbt_descr *bbt_td;
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <linux/spi/spi.h>
+#include <linux/export.h>
#include <mach/hardware.h>
#include <mach/fb.h>
.mask_flags = MTD_WRITEABLE, /* force read-only */
}, {
.name = "Linux",
- .offset = MTDPART_OFS_APPEND,
- .size = 0, /* filled in later */
+ .offset = MTDPART_OFS_RETAIN,
+ .size = TS72XX_REDBOOT_PART_SIZE,
+ /* leave so much for last partition */
}, {
.name = "RedBoot",
.offset = MTDPART_OFS_APPEND,
},
};
-static void ts72xx_nand_set_parts(uint64_t size,
- struct platform_nand_chip *chip)
-{
- /* Factory TS-72xx boards only come with 32MiB or 128MiB NAND options */
- if (size == SZ_32M || size == SZ_128M) {
- /* Set the "Linux" partition size */
- ts72xx_nand_parts[1].size = size - TS72XX_REDBOOT_PART_SIZE;
-
- chip->partitions = ts72xx_nand_parts;
- chip->nr_partitions = ARRAY_SIZE(ts72xx_nand_parts);
- } else {
- pr_warning("Unknown nand disk size:%lluMiB\n", size >> 20);
- }
-}
-
static struct platform_nand_data ts72xx_nand_data = {
.chip = {
.nr_chips = 1,
.chip_offset = 0,
.chip_delay = 15,
.part_probe_types = ts72xx_nand_part_probes,
- .set_parts = ts72xx_nand_set_parts,
+ .partitions = ts72xx_nand_parts,
+ .nr_partitions = ARRAY_SIZE(ts72xx_nand_parts),
},
.ctrl = {
.cmd_ctrl = ts72xx_nand_hwcontrol,
--- /dev/null
+# arch/arm/mach-exynos/Kconfig
+#
+# Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+# http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+# Configuration options for the EXYNOS4
+
+if ARCH_EXYNOS
+
+menu "SAMSUNG EXYNOS SoCs Support"
+
+choice
+ prompt "EXYNOS System Type"
+ default ARCH_EXYNOS4
+
+config ARCH_EXYNOS4
+ bool "SAMSUNG EXYNOS4"
+ help
+ Samsung EXYNOS4 SoCs based systems
+
+endchoice
+
+comment "EXYNOS SoCs"
+
+config CPU_EXYNOS4210
+ bool "SAMSUNG EXYNOS4210"
+ default y
+ depends on ARCH_EXYNOS4
+ select SAMSUNG_DMADEV
+ select ARM_CPU_SUSPEND if PM
+ select S5P_PM if PM
+ select S5P_SLEEP if PM
+ help
+ Enable EXYNOS4210 CPU support
+
+config SOC_EXYNOS4212
+ bool "SAMSUNG EXYNOS4212"
+ default y
+ depends on ARCH_EXYNOS4
+ select S5P_PM if PM
+ select S5P_SLEEP if PM
+ help
+ Enable EXYNOS4212 SoC support
+
+config SOC_EXYNOS4412
+ bool "SAMSUNG EXYNOS4412"
+ default y
+ depends on ARCH_EXYNOS4
+ help
+ Enable EXYNOS4412 SoC support
+
+config EXYNOS4_MCT
+ bool
+ default y
+ help
+ Use MCT (Multi Core Timer) as kernel timers
+
+config EXYNOS4_DEV_AHCI
+ bool
+ help
+ Compile in platform device definitions for AHCI
+
+config EXYNOS4_SETUP_FIMD0
+ bool
+ help
+ Common setup code for FIMD0.
+
+config EXYNOS4_DEV_PD
+ bool
+ help
+ Compile in platform device definitions for Power Domain
+
+config EXYNOS4_DEV_SYSMMU
+ bool
+ help
+ Common setup code for SYSTEM MMU in EXYNOS4
+
+config EXYNOS4_DEV_DWMCI
+ bool
+ help
+ Compile in platform device definitions for DWMCI
+
+config EXYNOS4_SETUP_I2C1
+ bool
+ help
+ Common setup code for i2c bus 1.
+
+config EXYNOS4_SETUP_I2C2
+ bool
+ help
+ Common setup code for i2c bus 2.
+
+config EXYNOS4_SETUP_I2C3
+ bool
+ help
+ Common setup code for i2c bus 3.
+
+config EXYNOS4_SETUP_I2C4
+ bool
+ help
+ Common setup code for i2c bus 4.
+
+config EXYNOS4_SETUP_I2C5
+ bool
+ help
+ Common setup code for i2c bus 5.
+
+config EXYNOS4_SETUP_I2C6
+ bool
+ help
+ Common setup code for i2c bus 6.
+
+config EXYNOS4_SETUP_I2C7
+ bool
+ help
+ Common setup code for i2c bus 7.
+
+config EXYNOS4_SETUP_KEYPAD
+ bool
+ help
+ Common setup code for keypad.
+
+config EXYNOS4_SETUP_SDHCI
+ bool
+ select EXYNOS4_SETUP_SDHCI_GPIO
+ help
+ Internal helper functions for EXYNOS4 based SDHCI systems.
+
+config EXYNOS4_SETUP_SDHCI_GPIO
+ bool
+ help
+ Common setup code for SDHCI gpio.
+
+config EXYNOS4_SETUP_FIMC
+ bool
+ help
+ Common setup code for the camera interfaces.
+
+config EXYNOS4_SETUP_USB_PHY
+ bool
+ help
+ Common setup code for USB PHY controller
+
+# machine support
+
+if ARCH_EXYNOS4
+
+comment "EXYNOS4210 Boards"
+
+config MACH_SMDKC210
+ bool "SMDKC210"
+ select MACH_SMDKV310
+ help
+ Machine support for Samsung SMDKC210
+
+config MACH_SMDKV310
+ bool "SMDKV310"
+ select CPU_EXYNOS4210
+ select S5P_DEV_FIMD0
+ select S3C_DEV_RTC
+ select S3C_DEV_WDT
+ select S3C_DEV_I2C1
+ select S5P_DEV_FIMC0
+ select S5P_DEV_FIMC1
+ select S5P_DEV_FIMC2
+ select S5P_DEV_FIMC3
+ select S5P_DEV_I2C_HDMIPHY
+ select S5P_DEV_MFC
+ select S5P_DEV_TV
+ select S5P_DEV_USB_EHCI
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_HSMMC2
+ select S3C_DEV_HSMMC3
+ select SAMSUNG_DEV_BACKLIGHT
+ select EXYNOS4_DEV_AHCI
+ select SAMSUNG_DEV_KEYPAD
+ select EXYNOS4_DEV_PD
+ select SAMSUNG_DEV_PWM
+ select EXYNOS4_DEV_SYSMMU
+ select EXYNOS4_SETUP_FIMD0
+ select EXYNOS4_SETUP_I2C1
+ select EXYNOS4_SETUP_KEYPAD
+ select EXYNOS4_SETUP_SDHCI
+ select EXYNOS4_SETUP_USB_PHY
+ help
+ Machine support for Samsung SMDKV310
+
+config MACH_ARMLEX4210
+ bool "ARMLEX4210"
+ select CPU_EXYNOS4210
+ select S3C_DEV_RTC
+ select S3C_DEV_WDT
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC2
+ select S3C_DEV_HSMMC3
+ select EXYNOS4_DEV_AHCI
+ select EXYNOS4_DEV_SYSMMU
+ select EXYNOS4_SETUP_SDHCI
+ help
+ Machine support for Samsung ARMLEX4210 based on EXYNOS4210
+
+config MACH_UNIVERSAL_C210
+ bool "Mobile UNIVERSAL_C210 Board"
+ select CPU_EXYNOS4210
+ select S5P_GPIO_INT
+ select S5P_DEV_FIMC0
+ select S5P_DEV_FIMC1
+ select S5P_DEV_FIMC2
+ select S5P_DEV_FIMC3
+ select S5P_DEV_CSIS0
+ select S5P_DEV_FIMD0
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC2
+ select S3C_DEV_HSMMC3
+ select S3C_DEV_I2C1
+ select S3C_DEV_I2C3
+ select S3C_DEV_I2C5
+ select S5P_DEV_I2C_HDMIPHY
+ select S5P_DEV_MFC
+ select S5P_DEV_ONENAND
+ select S5P_DEV_TV
+ select EXYNOS4_DEV_PD
+ select EXYNOS4_SETUP_FIMD0
+ select EXYNOS4_SETUP_I2C1
+ select EXYNOS4_SETUP_I2C3
+ select EXYNOS4_SETUP_I2C5
+ select EXYNOS4_SETUP_SDHCI
+ select EXYNOS4_SETUP_FIMC
+ select S5P_SETUP_MIPIPHY
+ help
+ Machine support for Samsung Mobile Universal S5PC210 Reference
+ Board.
+
+config MACH_NURI
+ bool "Mobile NURI Board"
+ select CPU_EXYNOS4210
+ select S5P_GPIO_INT
+ select S3C_DEV_WDT
+ select S3C_DEV_RTC
+ select S5P_DEV_FIMD0
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC2
+ select S3C_DEV_HSMMC3
+ select S3C_DEV_I2C1
+ select S3C_DEV_I2C3
+ select S3C_DEV_I2C5
+ select S5P_DEV_CSIS0
+ select S5P_DEV_FIMC0
+ select S5P_DEV_FIMC1
+ select S5P_DEV_FIMC2
+ select S5P_DEV_FIMC3
+ select S5P_DEV_MFC
+ select S5P_DEV_USB_EHCI
+ select S5P_SETUP_MIPIPHY
+ select EXYNOS4_DEV_PD
+ select EXYNOS4_SETUP_FIMC
+ select EXYNOS4_SETUP_FIMD0
+ select EXYNOS4_SETUP_I2C1
+ select EXYNOS4_SETUP_I2C3
+ select EXYNOS4_SETUP_I2C5
+ select EXYNOS4_SETUP_SDHCI
+ select EXYNOS4_SETUP_USB_PHY
+ select S5P_SETUP_MIPIPHY
+ select SAMSUNG_DEV_PWM
+ select SAMSUNG_DEV_ADC
+ help
+ Machine support for Samsung Mobile NURI Board.
+
+config MACH_ORIGEN
+ bool "ORIGEN"
+ select CPU_EXYNOS4210
+ select S3C_DEV_RTC
+ select S3C_DEV_WDT
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC2
+ select S5P_DEV_FIMC0
+ select S5P_DEV_FIMC1
+ select S5P_DEV_FIMC2
+ select S5P_DEV_FIMC3
+ select S5P_DEV_FIMD0
+ select S5P_DEV_I2C_HDMIPHY
+ select S5P_DEV_MFC
+ select S5P_DEV_TV
+ select S5P_DEV_USB_EHCI
+ select SAMSUNG_DEV_BACKLIGHT
+ select SAMSUNG_DEV_PWM
+ select EXYNOS4_DEV_PD
+ select EXYNOS4_SETUP_FIMD0
+ select EXYNOS4_SETUP_SDHCI
+ select EXYNOS4_SETUP_USB_PHY
+ help
+ Machine support for ORIGEN based on Samsung EXYNOS4210
+
+comment "EXYNOS4212 Boards"
+
+config MACH_SMDK4212
+ bool "SMDK4212"
+ select SOC_EXYNOS4212
+ select S3C_DEV_HSMMC2
+ select S3C_DEV_HSMMC3
+ select S3C_DEV_I2C1
+ select S3C_DEV_I2C3
+ select S3C_DEV_I2C7
+ select S3C_DEV_RTC
+ select S3C_DEV_WDT
+ select SAMSUNG_DEV_BACKLIGHT
+ select SAMSUNG_DEV_KEYPAD
+ select SAMSUNG_DEV_PWM
+ select EXYNOS4_SETUP_I2C1
+ select EXYNOS4_SETUP_I2C3
+ select EXYNOS4_SETUP_I2C7
+ select EXYNOS4_SETUP_KEYPAD
+ select EXYNOS4_SETUP_SDHCI
+ help
+ Machine support for Samsung SMDK4212
+
+comment "EXYNOS4412 Boards"
+
+config MACH_SMDK4412
+ bool "SMDK4412"
+ select SOC_EXYNOS4412
+ select MACH_SMDK4212
+ help
+ Machine support for Samsung SMDK4412
+endif
+
+if ARCH_EXYNOS4
+
+comment "Configuration for HSMMC 8-bit bus width"
+
+config EXYNOS4_SDHCI_CH0_8BIT
+ bool "Channel 0 with 8-bit bus"
+ help
+ Support HSMMC Channel 0 8-bit bus.
+ If selected, Channel 1 is disabled.
+
+config EXYNOS4_SDHCI_CH2_8BIT
+ bool "Channel 2 with 8-bit bus"
+ help
+ Support HSMMC Channel 2 8-bit bus.
+ If selected, Channel 3 is disabled.
+endif
+
+endmenu
+
+endif
--- /dev/null
+# arch/arm/mach-exynos/Makefile
+#
+# Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+# http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+# Core support for EXYNOS4 system
+
+obj-$(CONFIG_ARCH_EXYNOS4) += cpu.o init.o clock.o irq-combiner.o setup-i2c0.o
+obj-$(CONFIG_ARCH_EXYNOS4) += irq-eint.o dma.o pmu.o
+obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o
+obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o
+obj-$(CONFIG_PM) += pm.o
+obj-$(CONFIG_CPU_IDLE) += cpuidle.o
+
+obj-$(CONFIG_SMP) += platsmp.o headsmp.o
+
+obj-$(CONFIG_EXYNOS4_MCT) += mct.o
+
+obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+
+# machine support
+
+obj-$(CONFIG_MACH_SMDKC210) += mach-smdkv310.o
+obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o
+obj-$(CONFIG_MACH_ARMLEX4210) += mach-armlex4210.o
+obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o
+obj-$(CONFIG_MACH_NURI) += mach-nuri.o
+obj-$(CONFIG_MACH_ORIGEN) += mach-origen.o
+
+obj-$(CONFIG_MACH_SMDK4212) += mach-smdk4x12.o
+obj-$(CONFIG_MACH_SMDK4412) += mach-smdk4x12.o
+
+# device support
+
+obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o
+obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o
+obj-$(CONFIG_EXYNOS4_DEV_PD) += dev-pd.o
+obj-$(CONFIG_EXYNOS4_DEV_SYSMMU) += dev-sysmmu.o
+obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o
+
+obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o
+obj-$(CONFIG_EXYNOS4_SETUP_FIMD0) += setup-fimd0.o
+obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_EXYNOS4_SETUP_I2C2) += setup-i2c2.o
+obj-$(CONFIG_EXYNOS4_SETUP_I2C3) += setup-i2c3.o
+obj-$(CONFIG_EXYNOS4_SETUP_I2C4) += setup-i2c4.o
+obj-$(CONFIG_EXYNOS4_SETUP_I2C5) += setup-i2c5.o
+obj-$(CONFIG_EXYNOS4_SETUP_I2C6) += setup-i2c6.o
+obj-$(CONFIG_EXYNOS4_SETUP_I2C7) += setup-i2c7.o
+obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD) += setup-keypad.o
+obj-$(CONFIG_EXYNOS4_SETUP_SDHCI) += setup-sdhci.o
+obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY) += setup-usb-phy.o
--- /dev/null
+ zreladdr-y += 0x40008000
+params_phys-y := 0x40000100
--- /dev/null
+/*
+ * linux/arch/arm/mach-exynos4/clock-exynos4210.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4210 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/syscore_ops.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/exynos4.h>
+#include <plat/pm.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/exynos4-clock.h>
+
+static struct sleep_save exynos4210_clock_save[] = {
+ SAVE_ITEM(S5P_CLKSRC_IMAGE),
+ SAVE_ITEM(S5P_CLKSRC_LCD1),
+ SAVE_ITEM(S5P_CLKDIV_IMAGE),
+ SAVE_ITEM(S5P_CLKDIV_LCD1),
+ SAVE_ITEM(S5P_CLKSRC_MASK_LCD1),
+ SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4210),
+ SAVE_ITEM(S5P_CLKGATE_IP_LCD1),
+ SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210),
+};
+
+static struct clksrc_clk *sysclks[] = {
+ /* nothing here yet */
+};
+
+static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable);
+}
+
+static struct clksrc_clk clksrcs[] = {
+ {
+ .clk = {
+ .name = "sclk_sata",
+ .id = -1,
+ .enable = exynos4_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 24),
+ },
+ .sources = &clkset_mout_corebus,
+ .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimd",
+ .devname = "exynos4-fb.1",
+ .enable = exynos4_clksrc_mask_lcd1_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 },
+ },
+};
+
+static struct clk init_clocks_off[] = {
+ {
+ .name = "sataphy",
+ .id = -1,
+ .parent = &clk_aclk_133.clk,
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "sata",
+ .id = -1,
+ .parent = &clk_aclk_133.clk,
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 10),
+ }, {
+ .name = "fimd",
+ .devname = "exynos4-fb.1",
+ .enable = exynos4_clk_ip_lcd1_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos4210_clock_suspend(void)
+{
+ s3c_pm_do_save(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
+
+ return 0;
+}
+
+static void exynos4210_clock_resume(void)
+{
+ s3c_pm_do_restore_core(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
+}
+
+#else
+#define exynos4210_clock_suspend NULL
+#define exynos4210_clock_resume NULL
+#endif
+
+struct syscore_ops exynos4210_clock_syscore_ops = {
+ .suspend = exynos4210_clock_suspend,
+ .resume = exynos4210_clock_resume,
+};
+
+void __init exynos4210_register_clocks(void)
+{
+ int ptr;
+
+ clk_mout_mpll.reg_src.reg = S5P_CLKSRC_CPU;
+ clk_mout_mpll.reg_src.shift = 8;
+ clk_mout_mpll.reg_src.size = 1;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+ s3c_register_clksrc(sysclks[ptr], 1);
+
+ s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+
+ s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+
+ register_syscore_ops(&exynos4210_clock_syscore_ops);
+}
--- /dev/null
+/*
+ * linux/arch/arm/mach-exynos4/clock-exynos4212.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4212 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/syscore_ops.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/exynos4.h>
+#include <plat/pm.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/exynos4-clock.h>
+
+static struct sleep_save exynos4212_clock_save[] = {
+ SAVE_ITEM(S5P_CLKSRC_IMAGE),
+ SAVE_ITEM(S5P_CLKDIV_IMAGE),
+ SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212),
+ SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212),
+};
+
+static struct clk *clk_src_mpll_user_list[] = {
+ [0] = &clk_fin_mpll,
+ [1] = &clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources clk_src_mpll_user = {
+ .sources = clk_src_mpll_user_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mpll_user_list),
+};
+
+static struct clksrc_clk clk_mout_mpll_user = {
+ .clk = {
+ .name = "mout_mpll_user",
+ },
+ .sources = &clk_src_mpll_user,
+ .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 24, .size = 1 },
+};
+
+static struct clksrc_clk *sysclks[] = {
+ &clk_mout_mpll_user,
+};
+
+static struct clksrc_clk clksrcs[] = {
+ /* nothing here yet */
+};
+
+static struct clk init_clocks_off[] = {
+ /* nothing here yet */
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos4212_clock_suspend(void)
+{
+ s3c_pm_do_save(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
+
+ return 0;
+}
+
+static void exynos4212_clock_resume(void)
+{
+ s3c_pm_do_restore_core(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
+}
+
+#else
+#define exynos4212_clock_suspend NULL
+#define exynos4212_clock_resume NULL
+#endif
+
+struct syscore_ops exynos4212_clock_syscore_ops = {
+ .suspend = exynos4212_clock_suspend,
+ .resume = exynos4212_clock_resume,
+};
+
+void __init exynos4212_register_clocks(void)
+{
+ int ptr;
+
+ /* usbphy1 is removed */
+ clkset_group_list[4] = NULL;
+
+ /* mout_mpll_user is used */
+ clkset_group_list[6] = &clk_mout_mpll_user.clk;
+ clkset_aclk_top_list[0] = &clk_mout_mpll_user.clk;
+
+ clk_mout_mpll.reg_src.reg = S5P_CLKSRC_DMC;
+ clk_mout_mpll.reg_src.shift = 12;
+ clk_mout_mpll.reg_src.size = 1;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+ s3c_register_clksrc(sysclks[ptr], 1);
+
+ s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+
+ s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+
+ register_syscore_ops(&exynos4212_clock_syscore_ops);
+}
--- /dev/null
+/* linux/arch/arm/mach-exynos4/clock.c
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/syscore_ops.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/exynos4.h>
+#include <plat/pm.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/sysmmu.h>
+#include <mach/exynos4-clock.h>
+
+static struct sleep_save exynos4_clock_save[] = {
+ SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
+ SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
+ SAVE_ITEM(S5P_CLKDIV_RIGHTBUS),
+ SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS),
+ SAVE_ITEM(S5P_CLKSRC_TOP0),
+ SAVE_ITEM(S5P_CLKSRC_TOP1),
+ SAVE_ITEM(S5P_CLKSRC_CAM),
+ SAVE_ITEM(S5P_CLKSRC_TV),
+ SAVE_ITEM(S5P_CLKSRC_MFC),
+ SAVE_ITEM(S5P_CLKSRC_G3D),
+ SAVE_ITEM(S5P_CLKSRC_LCD0),
+ SAVE_ITEM(S5P_CLKSRC_MAUDIO),
+ SAVE_ITEM(S5P_CLKSRC_FSYS),
+ SAVE_ITEM(S5P_CLKSRC_PERIL0),
+ SAVE_ITEM(S5P_CLKSRC_PERIL1),
+ SAVE_ITEM(S5P_CLKDIV_CAM),
+ SAVE_ITEM(S5P_CLKDIV_TV),
+ SAVE_ITEM(S5P_CLKDIV_MFC),
+ SAVE_ITEM(S5P_CLKDIV_G3D),
+ SAVE_ITEM(S5P_CLKDIV_LCD0),
+ SAVE_ITEM(S5P_CLKDIV_MAUDIO),
+ SAVE_ITEM(S5P_CLKDIV_FSYS0),
+ SAVE_ITEM(S5P_CLKDIV_FSYS1),
+ SAVE_ITEM(S5P_CLKDIV_FSYS2),
+ SAVE_ITEM(S5P_CLKDIV_FSYS3),
+ SAVE_ITEM(S5P_CLKDIV_PERIL0),
+ SAVE_ITEM(S5P_CLKDIV_PERIL1),
+ SAVE_ITEM(S5P_CLKDIV_PERIL2),
+ SAVE_ITEM(S5P_CLKDIV_PERIL3),
+ SAVE_ITEM(S5P_CLKDIV_PERIL4),
+ SAVE_ITEM(S5P_CLKDIV_PERIL5),
+ SAVE_ITEM(S5P_CLKDIV_TOP),
+ SAVE_ITEM(S5P_CLKSRC_MASK_TOP),
+ SAVE_ITEM(S5P_CLKSRC_MASK_CAM),
+ SAVE_ITEM(S5P_CLKSRC_MASK_TV),
+ SAVE_ITEM(S5P_CLKSRC_MASK_LCD0),
+ SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO),
+ SAVE_ITEM(S5P_CLKSRC_MASK_FSYS),
+ SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0),
+ SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1),
+ SAVE_ITEM(S5P_CLKDIV2_RATIO),
+ SAVE_ITEM(S5P_CLKGATE_SCLKCAM),
+ SAVE_ITEM(S5P_CLKGATE_IP_CAM),
+ SAVE_ITEM(S5P_CLKGATE_IP_TV),
+ SAVE_ITEM(S5P_CLKGATE_IP_MFC),
+ SAVE_ITEM(S5P_CLKGATE_IP_G3D),
+ SAVE_ITEM(S5P_CLKGATE_IP_LCD0),
+ SAVE_ITEM(S5P_CLKGATE_IP_FSYS),
+ SAVE_ITEM(S5P_CLKGATE_IP_GPS),
+ SAVE_ITEM(S5P_CLKGATE_IP_PERIL),
+ SAVE_ITEM(S5P_CLKGATE_BLOCK),
+ SAVE_ITEM(S5P_CLKSRC_MASK_DMC),
+ SAVE_ITEM(S5P_CLKSRC_DMC),
+ SAVE_ITEM(S5P_CLKDIV_DMC0),
+ SAVE_ITEM(S5P_CLKDIV_DMC1),
+ SAVE_ITEM(S5P_CLKGATE_IP_DMC),
+ SAVE_ITEM(S5P_CLKSRC_CPU),
+ SAVE_ITEM(S5P_CLKDIV_CPU),
+ SAVE_ITEM(S5P_CLKDIV_CPU + 0x4),
+ SAVE_ITEM(S5P_CLKGATE_SCLKCPU),
+ SAVE_ITEM(S5P_CLKGATE_IP_CPU),
+};
+
+struct clk clk_sclk_hdmi27m = {
+ .name = "sclk_hdmi27m",
+ .rate = 27000000,
+};
+
+struct clk clk_sclk_hdmiphy = {
+ .name = "sclk_hdmiphy",
+};
+
+struct clk clk_sclk_usbphy0 = {
+ .name = "sclk_usbphy0",
+ .rate = 27000000,
+};
+
+struct clk clk_sclk_usbphy1 = {
+ .name = "sclk_usbphy1",
+};
+
+static struct clk dummy_apb_pclk = {
+ .name = "apb_pclk",
+ .id = -1,
+};
+
+static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKSRC_MASK_TOP, clk, enable);
+}
+
+static int exynos4_clksrc_mask_cam_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKSRC_MASK_CAM, clk, enable);
+}
+
+static int exynos4_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKSRC_MASK_LCD0, clk, enable);
+}
+
+int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKSRC_MASK_FSYS, clk, enable);
+}
+
+static int exynos4_clksrc_mask_peril0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKSRC_MASK_PERIL0, clk, enable);
+}
+
+static int exynos4_clksrc_mask_peril1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKSRC_MASK_PERIL1, clk, enable);
+}
+
+static int exynos4_clk_ip_mfc_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP_MFC, clk, enable);
+}
+
+static int exynos4_clksrc_mask_tv_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKSRC_MASK_TV, clk, enable);
+}
+
+static int exynos4_clk_ip_cam_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP_CAM, clk, enable);
+}
+
+static int exynos4_clk_ip_tv_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP_TV, clk, enable);
+}
+
+static int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP_IMAGE, clk, enable);
+}
+
+static int exynos4_clk_ip_lcd0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP_LCD0, clk, enable);
+}
+
+int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP_LCD1, clk, enable);
+}
+
+int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP_FSYS, clk, enable);
+}
+
+static int exynos4_clk_ip_peril_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP_PERIL, clk, enable);
+}
+
+static int exynos4_clk_ip_perir_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP_PERIR, clk, enable);
+}
+
+static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
+}
+
+static int exynos4_clk_dac_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable);
+}
+
+/* Core list of CMU_CPU side */
+
+static struct clksrc_clk clk_mout_apll = {
+ .clk = {
+ .name = "mout_apll",
+ },
+ .sources = &clk_src_apll,
+ .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 0, .size = 1 },
+};
+
+struct clksrc_clk clk_sclk_apll = {
+ .clk = {
+ .name = "sclk_apll",
+ .parent = &clk_mout_apll.clk,
+ },
+ .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 24, .size = 3 },
+};
+
+struct clksrc_clk clk_mout_epll = {
+ .clk = {
+ .name = "mout_epll",
+ },
+ .sources = &clk_src_epll,
+ .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 4, .size = 1 },
+};
+
+struct clksrc_clk clk_mout_mpll = {
+ .clk = {
+ .name = "mout_mpll",
+ },
+ .sources = &clk_src_mpll,
+
+ /* reg_src will be added in each SoCs' clock */
+};
+
+static struct clk *clkset_moutcore_list[] = {
+ [0] = &clk_mout_apll.clk,
+ [1] = &clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources clkset_moutcore = {
+ .sources = clkset_moutcore_list,
+ .nr_sources = ARRAY_SIZE(clkset_moutcore_list),
+};
+
+static struct clksrc_clk clk_moutcore = {
+ .clk = {
+ .name = "moutcore",
+ },
+ .sources = &clkset_moutcore,
+ .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 16, .size = 1 },
+};
+
+static struct clksrc_clk clk_coreclk = {
+ .clk = {
+ .name = "core_clk",
+ .parent = &clk_moutcore.clk,
+ },
+ .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 0, .size = 3 },
+};
+
+static struct clksrc_clk clk_armclk = {
+ .clk = {
+ .name = "armclk",
+ .parent = &clk_coreclk.clk,
+ },
+};
+
+static struct clksrc_clk clk_aclk_corem0 = {
+ .clk = {
+ .name = "aclk_corem0",
+ .parent = &clk_coreclk.clk,
+ },
+ .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 4, .size = 3 },
+};
+
+static struct clksrc_clk clk_aclk_cores = {
+ .clk = {
+ .name = "aclk_cores",
+ .parent = &clk_coreclk.clk,
+ },
+ .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 4, .size = 3 },
+};
+
+static struct clksrc_clk clk_aclk_corem1 = {
+ .clk = {
+ .name = "aclk_corem1",
+ .parent = &clk_coreclk.clk,
+ },
+ .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 8, .size = 3 },
+};
+
+static struct clksrc_clk clk_periphclk = {
+ .clk = {
+ .name = "periphclk",
+ .parent = &clk_coreclk.clk,
+ },
+ .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 12, .size = 3 },
+};
+
+/* Core list of CMU_CORE side */
+
+struct clk *clkset_corebus_list[] = {
+ [0] = &clk_mout_mpll.clk,
+ [1] = &clk_sclk_apll.clk,
+};
+
+struct clksrc_sources clkset_mout_corebus = {
+ .sources = clkset_corebus_list,
+ .nr_sources = ARRAY_SIZE(clkset_corebus_list),
+};
+
+static struct clksrc_clk clk_mout_corebus = {
+ .clk = {
+ .name = "mout_corebus",
+ },
+ .sources = &clkset_mout_corebus,
+ .reg_src = { .reg = S5P_CLKSRC_DMC, .shift = 4, .size = 1 },
+};
+
+static struct clksrc_clk clk_sclk_dmc = {
+ .clk = {
+ .name = "sclk_dmc",
+ .parent = &clk_mout_corebus.clk,
+ },
+ .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 12, .size = 3 },
+};
+
+static struct clksrc_clk clk_aclk_cored = {
+ .clk = {
+ .name = "aclk_cored",
+ .parent = &clk_sclk_dmc.clk,
+ },
+ .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 16, .size = 3 },
+};
+
+static struct clksrc_clk clk_aclk_corep = {
+ .clk = {
+ .name = "aclk_corep",
+ .parent = &clk_aclk_cored.clk,
+ },
+ .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 20, .size = 3 },
+};
+
+static struct clksrc_clk clk_aclk_acp = {
+ .clk = {
+ .name = "aclk_acp",
+ .parent = &clk_mout_corebus.clk,
+ },
+ .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 0, .size = 3 },
+};
+
+static struct clksrc_clk clk_pclk_acp = {
+ .clk = {
+ .name = "pclk_acp",
+ .parent = &clk_aclk_acp.clk,
+ },
+ .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 4, .size = 3 },
+};
+
+/* Core list of CMU_TOP side */
+
+struct clk *clkset_aclk_top_list[] = {
+ [0] = &clk_mout_mpll.clk,
+ [1] = &clk_sclk_apll.clk,
+};
+
+struct clksrc_sources clkset_aclk = {
+ .sources = clkset_aclk_top_list,
+ .nr_sources = ARRAY_SIZE(clkset_aclk_top_list),
+};
+
+static struct clksrc_clk clk_aclk_200 = {
+ .clk = {
+ .name = "aclk_200",
+ },
+ .sources = &clkset_aclk,
+ .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 12, .size = 1 },
+ .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 0, .size = 3 },
+};
+
+static struct clksrc_clk clk_aclk_100 = {
+ .clk = {
+ .name = "aclk_100",
+ },
+ .sources = &clkset_aclk,
+ .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 16, .size = 1 },
+ .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_clk clk_aclk_160 = {
+ .clk = {
+ .name = "aclk_160",
+ },
+ .sources = &clkset_aclk,
+ .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 20, .size = 1 },
+ .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 8, .size = 3 },
+};
+
+struct clksrc_clk clk_aclk_133 = {
+ .clk = {
+ .name = "aclk_133",
+ },
+ .sources = &clkset_aclk,
+ .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 24, .size = 1 },
+ .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 12, .size = 3 },
+};
+
+static struct clk *clkset_vpllsrc_list[] = {
+ [0] = &clk_fin_vpll,
+ [1] = &clk_sclk_hdmi27m,
+};
+
+static struct clksrc_sources clkset_vpllsrc = {
+ .sources = clkset_vpllsrc_list,
+ .nr_sources = ARRAY_SIZE(clkset_vpllsrc_list),
+};
+
+static struct clksrc_clk clk_vpllsrc = {
+ .clk = {
+ .name = "vpll_src",
+ .enable = exynos4_clksrc_mask_top_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &clkset_vpllsrc,
+ .reg_src = { .reg = S5P_CLKSRC_TOP1, .shift = 0, .size = 1 },
+};
+
+static struct clk *clkset_sclk_vpll_list[] = {
+ [0] = &clk_vpllsrc.clk,
+ [1] = &clk_fout_vpll,
+};
+
+static struct clksrc_sources clkset_sclk_vpll = {
+ .sources = clkset_sclk_vpll_list,
+ .nr_sources = ARRAY_SIZE(clkset_sclk_vpll_list),
+};
+
+struct clksrc_clk clk_sclk_vpll = {
+ .clk = {
+ .name = "sclk_vpll",
+ },
+ .sources = &clkset_sclk_vpll,
+ .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 8, .size = 1 },
+};
+
+static struct clk init_clocks_off[] = {
+ {
+ .name = "timers",
+ .parent = &clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1<<24),
+ }, {
+ .name = "csis",
+ .devname = "s5p-mipi-csis.0",
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "csis",
+ .devname = "s5p-mipi-csis.1",
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "fimc",
+ .devname = "exynos4-fimc.0",
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "fimc",
+ .devname = "exynos4-fimc.1",
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "fimc",
+ .devname = "exynos4-fimc.2",
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "fimc",
+ .devname = "exynos4-fimc.3",
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "fimd",
+ .devname = "exynos4-fb.0",
+ .enable = exynos4_clk_ip_lcd0_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.0",
+ .parent = &clk_aclk_133.clk,
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.1",
+ .parent = &clk_aclk_133.clk,
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.2",
+ .parent = &clk_aclk_133.clk,
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.3",
+ .parent = &clk_aclk_133.clk,
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "dwmmc",
+ .parent = &clk_aclk_133.clk,
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 9),
+ }, {
+ .name = "dac",
+ .devname = "s5p-sdo",
+ .enable = exynos4_clk_ip_tv_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "mixer",
+ .devname = "s5p-mixer",
+ .enable = exynos4_clk_ip_tv_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "vp",
+ .devname = "s5p-mixer",
+ .enable = exynos4_clk_ip_tv_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "hdmi",
+ .devname = "exynos4-hdmi",
+ .enable = exynos4_clk_ip_tv_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "hdmiphy",
+ .devname = "exynos4-hdmi",
+ .enable = exynos4_clk_hdmiphy_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "dacphy",
+ .devname = "s5p-sdo",
+ .enable = exynos4_clk_dac_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "dma",
+ .devname = "dma-pl330.0",
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "dma",
+ .devname = "dma-pl330.1",
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "adc",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 15),
+ }, {
+ .name = "keypad",
+ .enable = exynos4_clk_ip_perir_ctrl,
+ .ctrlbit = (1 << 16),
+ }, {
+ .name = "rtc",
+ .enable = exynos4_clk_ip_perir_ctrl,
+ .ctrlbit = (1 << 15),
+ }, {
+ .name = "watchdog",
+ .parent = &clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_perir_ctrl,
+ .ctrlbit = (1 << 14),
+ }, {
+ .name = "usbhost",
+ .enable = exynos4_clk_ip_fsys_ctrl ,
+ .ctrlbit = (1 << 12),
+ }, {
+ .name = "otg",
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 13),
+ }, {
+ .name = "spi",
+ .devname = "s3c64xx-spi.0",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 16),
+ }, {
+ .name = "spi",
+ .devname = "s3c64xx-spi.1",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 17),
+ }, {
+ .name = "spi",
+ .devname = "s3c64xx-spi.2",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 18),
+ }, {
+ .name = "iis",
+ .devname = "samsung-i2s.0",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 19),
+ }, {
+ .name = "iis",
+ .devname = "samsung-i2s.1",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 20),
+ }, {
+ .name = "iis",
+ .devname = "samsung-i2s.2",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 21),
+ }, {
+ .name = "ac97",
+ .devname = "samsung-ac97",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 27),
+ }, {
+ .name = "fimg2d",
+ .enable = exynos4_clk_ip_image_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "mfc",
+ .devname = "s5p-mfc",
+ .enable = exynos4_clk_ip_mfc_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.0",
+ .parent = &clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.1",
+ .parent = &clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.2",
+ .parent = &clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.3",
+ .parent = &clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 9),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.4",
+ .parent = &clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 10),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.5",
+ .parent = &clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 11),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.6",
+ .parent = &clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 12),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.7",
+ .parent = &clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 13),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-hdmiphy-i2c",
+ .parent = &clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 14),
+ }, {
+ .name = "SYSMMU_MDMA",
+ .enable = exynos4_clk_ip_image_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "SYSMMU_FIMC0",
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "SYSMMU_FIMC1",
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "SYSMMU_FIMC2",
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 9),
+ }, {
+ .name = "SYSMMU_FIMC3",
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 10),
+ }, {
+ .name = "SYSMMU_JPEG",
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 11),
+ }, {
+ .name = "SYSMMU_FIMD0",
+ .enable = exynos4_clk_ip_lcd0_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "SYSMMU_FIMD1",
+ .enable = exynos4_clk_ip_lcd1_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "SYSMMU_PCIe",
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 18),
+ }, {
+ .name = "SYSMMU_G2D",
+ .enable = exynos4_clk_ip_image_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "SYSMMU_ROTATOR",
+ .enable = exynos4_clk_ip_image_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "SYSMMU_TV",
+ .enable = exynos4_clk_ip_tv_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "SYSMMU_MFC_L",
+ .enable = exynos4_clk_ip_mfc_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "SYSMMU_MFC_R",
+ .enable = exynos4_clk_ip_mfc_ctrl,
+ .ctrlbit = (1 << 2),
+ }
+};
+
+static struct clk init_clocks[] = {
+ {
+ .name = "uart",
+ .devname = "s5pv210-uart.0",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "uart",
+ .devname = "s5pv210-uart.1",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "uart",
+ .devname = "s5pv210-uart.2",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "uart",
+ .devname = "s5pv210-uart.3",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "uart",
+ .devname = "s5pv210-uart.4",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "uart",
+ .devname = "s5pv210-uart.5",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 5),
+ }
+};
+
+struct clk *clkset_group_list[] = {
+ [0] = &clk_ext_xtal_mux,
+ [1] = &clk_xusbxti,
+ [2] = &clk_sclk_hdmi27m,
+ [3] = &clk_sclk_usbphy0,
+ [4] = &clk_sclk_usbphy1,
+ [5] = &clk_sclk_hdmiphy,
+ [6] = &clk_mout_mpll.clk,
+ [7] = &clk_mout_epll.clk,
+ [8] = &clk_sclk_vpll.clk,
+};
+
+struct clksrc_sources clkset_group = {
+ .sources = clkset_group_list,
+ .nr_sources = ARRAY_SIZE(clkset_group_list),
+};
+
+static struct clk *clkset_mout_g2d0_list[] = {
+ [0] = &clk_mout_mpll.clk,
+ [1] = &clk_sclk_apll.clk,
+};
+
+static struct clksrc_sources clkset_mout_g2d0 = {
+ .sources = clkset_mout_g2d0_list,
+ .nr_sources = ARRAY_SIZE(clkset_mout_g2d0_list),
+};
+
+static struct clksrc_clk clk_mout_g2d0 = {
+ .clk = {
+ .name = "mout_g2d0",
+ },
+ .sources = &clkset_mout_g2d0,
+ .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 0, .size = 1 },
+};
+
+static struct clk *clkset_mout_g2d1_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_sclk_vpll.clk,
+};
+
+static struct clksrc_sources clkset_mout_g2d1 = {
+ .sources = clkset_mout_g2d1_list,
+ .nr_sources = ARRAY_SIZE(clkset_mout_g2d1_list),
+};
+
+static struct clksrc_clk clk_mout_g2d1 = {
+ .clk = {
+ .name = "mout_g2d1",
+ },
+ .sources = &clkset_mout_g2d1,
+ .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 4, .size = 1 },
+};
+
+static struct clk *clkset_mout_g2d_list[] = {
+ [0] = &clk_mout_g2d0.clk,
+ [1] = &clk_mout_g2d1.clk,
+};
+
+static struct clksrc_sources clkset_mout_g2d = {
+ .sources = clkset_mout_g2d_list,
+ .nr_sources = ARRAY_SIZE(clkset_mout_g2d_list),
+};
+
+static struct clk *clkset_mout_mfc0_list[] = {
+ [0] = &clk_mout_mpll.clk,
+ [1] = &clk_sclk_apll.clk,
+};
+
+static struct clksrc_sources clkset_mout_mfc0 = {
+ .sources = clkset_mout_mfc0_list,
+ .nr_sources = ARRAY_SIZE(clkset_mout_mfc0_list),
+};
+
+static struct clksrc_clk clk_mout_mfc0 = {
+ .clk = {
+ .name = "mout_mfc0",
+ },
+ .sources = &clkset_mout_mfc0,
+ .reg_src = { .reg = S5P_CLKSRC_MFC, .shift = 0, .size = 1 },
+};
+
+static struct clk *clkset_mout_mfc1_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_sclk_vpll.clk,
+};
+
+static struct clksrc_sources clkset_mout_mfc1 = {
+ .sources = clkset_mout_mfc1_list,
+ .nr_sources = ARRAY_SIZE(clkset_mout_mfc1_list),
+};
+
+static struct clksrc_clk clk_mout_mfc1 = {
+ .clk = {
+ .name = "mout_mfc1",
+ },
+ .sources = &clkset_mout_mfc1,
+ .reg_src = { .reg = S5P_CLKSRC_MFC, .shift = 4, .size = 1 },
+};
+
+static struct clk *clkset_mout_mfc_list[] = {
+ [0] = &clk_mout_mfc0.clk,
+ [1] = &clk_mout_mfc1.clk,
+};
+
+static struct clksrc_sources clkset_mout_mfc = {
+ .sources = clkset_mout_mfc_list,
+ .nr_sources = ARRAY_SIZE(clkset_mout_mfc_list),
+};
+
+static struct clk *clkset_sclk_dac_list[] = {
+ [0] = &clk_sclk_vpll.clk,
+ [1] = &clk_sclk_hdmiphy,
+};
+
+static struct clksrc_sources clkset_sclk_dac = {
+ .sources = clkset_sclk_dac_list,
+ .nr_sources = ARRAY_SIZE(clkset_sclk_dac_list),
+};
+
+static struct clksrc_clk clk_sclk_dac = {
+ .clk = {
+ .name = "sclk_dac",
+ .enable = exynos4_clksrc_mask_tv_ctrl,
+ .ctrlbit = (1 << 8),
+ },
+ .sources = &clkset_sclk_dac,
+ .reg_src = { .reg = S5P_CLKSRC_TV, .shift = 8, .size = 1 },
+};
+
+static struct clksrc_clk clk_sclk_pixel = {
+ .clk = {
+ .name = "sclk_pixel",
+ .parent = &clk_sclk_vpll.clk,
+ },
+ .reg_div = { .reg = S5P_CLKDIV_TV, .shift = 0, .size = 4 },
+};
+
+static struct clk *clkset_sclk_hdmi_list[] = {
+ [0] = &clk_sclk_pixel.clk,
+ [1] = &clk_sclk_hdmiphy,
+};
+
+static struct clksrc_sources clkset_sclk_hdmi = {
+ .sources = clkset_sclk_hdmi_list,
+ .nr_sources = ARRAY_SIZE(clkset_sclk_hdmi_list),
+};
+
+static struct clksrc_clk clk_sclk_hdmi = {
+ .clk = {
+ .name = "sclk_hdmi",
+ .enable = exynos4_clksrc_mask_tv_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &clkset_sclk_hdmi,
+ .reg_src = { .reg = S5P_CLKSRC_TV, .shift = 0, .size = 1 },
+};
+
+static struct clk *clkset_sclk_mixer_list[] = {
+ [0] = &clk_sclk_dac.clk,
+ [1] = &clk_sclk_hdmi.clk,
+};
+
+static struct clksrc_sources clkset_sclk_mixer = {
+ .sources = clkset_sclk_mixer_list,
+ .nr_sources = ARRAY_SIZE(clkset_sclk_mixer_list),
+};
+
+static struct clksrc_clk clk_sclk_mixer = {
+ .clk = {
+ .name = "sclk_mixer",
+ .enable = exynos4_clksrc_mask_tv_ctrl,
+ .ctrlbit = (1 << 4),
+ },
+ .sources = &clkset_sclk_mixer,
+ .reg_src = { .reg = S5P_CLKSRC_TV, .shift = 4, .size = 1 },
+};
+
+static struct clksrc_clk *sclk_tv[] = {
+ &clk_sclk_dac,
+ &clk_sclk_pixel,
+ &clk_sclk_hdmi,
+ &clk_sclk_mixer,
+};
+
+static struct clksrc_clk clk_dout_mmc0 = {
+ .clk = {
+ .name = "dout_mmc0",
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 0, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_dout_mmc1 = {
+ .clk = {
+ .name = "dout_mmc1",
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 4, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk clk_dout_mmc2 = {
+ .clk = {
+ .name = "dout_mmc2",
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 8, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_dout_mmc3 = {
+ .clk = {
+ .name = "dout_mmc3",
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 12, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk clk_dout_mmc4 = {
+ .clk = {
+ .name = "dout_mmc4",
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 16, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS3, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clksrcs[] = {
+ {
+ .clk = {
+ .name = "uclk1",
+ .devname = "s5pv210-uart.0",
+ .enable = exynos4_clksrc_mask_peril0_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 0, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "uclk1",
+ .devname = "s5pv210-uart.1",
+ .enable = exynos4_clksrc_mask_peril0_ctrl,
+ .ctrlbit = (1 << 4),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 4, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 4, .size = 4 },
+ }, {
+ .clk = {
+ .name = "uclk1",
+ .devname = "s5pv210-uart.2",
+ .enable = exynos4_clksrc_mask_peril0_ctrl,
+ .ctrlbit = (1 << 8),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 8, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 8, .size = 4 },
+ }, {
+ .clk = {
+ .name = "uclk1",
+ .devname = "s5pv210-uart.3",
+ .enable = exynos4_clksrc_mask_peril0_ctrl,
+ .ctrlbit = (1 << 12),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 12, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 12, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_pwm",
+ .enable = exynos4_clksrc_mask_peril0_ctrl,
+ .ctrlbit = (1 << 24),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 24, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_PERIL3, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_csis",
+ .devname = "s5p-mipi-csis.0",
+ .enable = exynos4_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 24),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 24, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 24, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_csis",
+ .devname = "s5p-mipi-csis.1",
+ .enable = exynos4_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 28),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 28, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_cam0",
+ .enable = exynos4_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 16),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 16, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_cam1",
+ .enable = exynos4_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 20),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 20, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 20, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimc",
+ .devname = "exynos4-fimc.0",
+ .enable = exynos4_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 0, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimc",
+ .devname = "exynos4-fimc.1",
+ .enable = exynos4_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 4),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 4, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 4, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimc",
+ .devname = "exynos4-fimc.2",
+ .enable = exynos4_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 8),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 8, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 8, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimc",
+ .devname = "exynos4-fimc.3",
+ .enable = exynos4_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 12),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 12, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 12, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimd",
+ .devname = "exynos4-fb.0",
+ .enable = exynos4_clksrc_mask_lcd0_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_LCD0, .shift = 0, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_LCD0, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.0",
+ .enable = exynos4_clksrc_mask_peril1_ctrl,
+ .ctrlbit = (1 << 16),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 16, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.1",
+ .enable = exynos4_clksrc_mask_peril1_ctrl,
+ .ctrlbit = (1 << 20),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 20, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 16, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.2",
+ .enable = exynos4_clksrc_mask_peril1_ctrl,
+ .ctrlbit = (1 << 24),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 24, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_PERIL2, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimg2d",
+ },
+ .sources = &clkset_mout_g2d,
+ .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 8, .size = 1 },
+ .reg_div = { .reg = S5P_CLKDIV_IMAGE, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_mfc",
+ .devname = "s5p-mfc",
+ },
+ .sources = &clkset_mout_mfc,
+ .reg_src = { .reg = S5P_CLKSRC_MFC, .shift = 8, .size = 1 },
+ .reg_div = { .reg = S5P_CLKDIV_MFC, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.0",
+ .parent = &clk_dout_mmc0.clk,
+ .enable = exynos4_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 8, .size = 8 },
+ }, {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.1",
+ .parent = &clk_dout_mmc1.clk,
+ .enable = exynos4_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 4),
+ },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 24, .size = 8 },
+ }, {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.2",
+ .parent = &clk_dout_mmc2.clk,
+ .enable = exynos4_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 8),
+ },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 8, .size = 8 },
+ }, {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.3",
+ .parent = &clk_dout_mmc3.clk,
+ .enable = exynos4_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 12),
+ },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 24, .size = 8 },
+ }, {
+ .clk = {
+ .name = "sclk_dwmmc",
+ .parent = &clk_dout_mmc4.clk,
+ .enable = exynos4_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 16),
+ },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS3, .shift = 8, .size = 8 },
+ }
+};
+
+/* Clock initialization code */
+static struct clksrc_clk *sysclks[] = {
+ &clk_mout_apll,
+ &clk_sclk_apll,
+ &clk_mout_epll,
+ &clk_mout_mpll,
+ &clk_moutcore,
+ &clk_coreclk,
+ &clk_armclk,
+ &clk_aclk_corem0,
+ &clk_aclk_cores,
+ &clk_aclk_corem1,
+ &clk_periphclk,
+ &clk_mout_corebus,
+ &clk_sclk_dmc,
+ &clk_aclk_cored,
+ &clk_aclk_corep,
+ &clk_aclk_acp,
+ &clk_pclk_acp,
+ &clk_vpllsrc,
+ &clk_sclk_vpll,
+ &clk_aclk_200,
+ &clk_aclk_100,
+ &clk_aclk_160,
+ &clk_aclk_133,
+ &clk_dout_mmc0,
+ &clk_dout_mmc1,
+ &clk_dout_mmc2,
+ &clk_dout_mmc3,
+ &clk_dout_mmc4,
+ &clk_mout_mfc0,
+ &clk_mout_mfc1,
+};
+
+static int xtal_rate;
+
+static unsigned long exynos4_fout_apll_get_rate(struct clk *clk)
+{
+ if (soc_is_exynos4210())
+ return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0),
+ pll_4508);
+ else if (soc_is_exynos4212() || soc_is_exynos4412())
+ return s5p_get_pll35xx(xtal_rate, __raw_readl(S5P_APLL_CON0));
+ else
+ return 0;
+}
+
+static struct clk_ops exynos4_fout_apll_ops = {
+ .get_rate = exynos4_fout_apll_get_rate,
+};
+
+static u32 vpll_div[][8] = {
+ { 54000000, 3, 53, 3, 1024, 0, 17, 0 },
+ { 108000000, 3, 53, 2, 1024, 0, 17, 0 },
+};
+
+static unsigned long exynos4_vpll_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+
+static int exynos4_vpll_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned int vpll_con0, vpll_con1 = 0;
+ unsigned int i;
+
+ /* Return if nothing changed */
+ if (clk->rate == rate)
+ return 0;
+
+ vpll_con0 = __raw_readl(S5P_VPLL_CON0);
+ vpll_con0 &= ~(0x1 << 27 | \
+ PLL90XX_MDIV_MASK << PLL46XX_MDIV_SHIFT | \
+ PLL90XX_PDIV_MASK << PLL46XX_PDIV_SHIFT | \
+ PLL90XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
+
+ vpll_con1 = __raw_readl(S5P_VPLL_CON1);
+ vpll_con1 &= ~(PLL46XX_MRR_MASK << PLL46XX_MRR_SHIFT | \
+ PLL46XX_MFR_MASK << PLL46XX_MFR_SHIFT | \
+ PLL4650C_KDIV_MASK << PLL46XX_KDIV_SHIFT);
+
+ for (i = 0; i < ARRAY_SIZE(vpll_div); i++) {
+ if (vpll_div[i][0] == rate) {
+ vpll_con0 |= vpll_div[i][1] << PLL46XX_PDIV_SHIFT;
+ vpll_con0 |= vpll_div[i][2] << PLL46XX_MDIV_SHIFT;
+ vpll_con0 |= vpll_div[i][3] << PLL46XX_SDIV_SHIFT;
+ vpll_con1 |= vpll_div[i][4] << PLL46XX_KDIV_SHIFT;
+ vpll_con1 |= vpll_div[i][5] << PLL46XX_MFR_SHIFT;
+ vpll_con1 |= vpll_div[i][6] << PLL46XX_MRR_SHIFT;
+ vpll_con0 |= vpll_div[i][7] << 27;
+ break;
+ }
+ }
+
+ if (i == ARRAY_SIZE(vpll_div)) {
+ printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ __raw_writel(vpll_con0, S5P_VPLL_CON0);
+ __raw_writel(vpll_con1, S5P_VPLL_CON1);
+
+ /* Wait for VPLL lock */
+ while (!(__raw_readl(S5P_VPLL_CON0) & (1 << PLL46XX_LOCKED_SHIFT)))
+ continue;
+
+ clk->rate = rate;
+ return 0;
+}
+
+static struct clk_ops exynos4_vpll_ops = {
+ .get_rate = exynos4_vpll_get_rate,
+ .set_rate = exynos4_vpll_set_rate,
+};
+
+void __init_or_cpufreq exynos4_setup_clocks(void)
+{
+ struct clk *xtal_clk;
+ unsigned long apll = 0;
+ unsigned long mpll = 0;
+ unsigned long epll = 0;
+ unsigned long vpll = 0;
+ unsigned long vpllsrc;
+ unsigned long xtal;
+ unsigned long armclk;
+ unsigned long sclk_dmc;
+ unsigned long aclk_200;
+ unsigned long aclk_100;
+ unsigned long aclk_160;
+ unsigned long aclk_133;
+ unsigned int ptr;
+
+ printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+ xtal_clk = clk_get(NULL, "xtal");
+ BUG_ON(IS_ERR(xtal_clk));
+
+ xtal = clk_get_rate(xtal_clk);
+
+ xtal_rate = xtal;
+
+ clk_put(xtal_clk);
+
+ printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+ if (soc_is_exynos4210()) {
+ apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0),
+ pll_4508);
+ mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0),
+ pll_4508);
+ epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0),
+ __raw_readl(S5P_EPLL_CON1), pll_4600);
+
+ vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
+ vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
+ __raw_readl(S5P_VPLL_CON1), pll_4650c);
+ } else if (soc_is_exynos4212() || soc_is_exynos4412()) {
+ apll = s5p_get_pll35xx(xtal, __raw_readl(S5P_APLL_CON0));
+ mpll = s5p_get_pll35xx(xtal, __raw_readl(S5P_MPLL_CON0));
+ epll = s5p_get_pll36xx(xtal, __raw_readl(S5P_EPLL_CON0),
+ __raw_readl(S5P_EPLL_CON1));
+
+ vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
+ vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
+ __raw_readl(S5P_VPLL_CON1));
+ } else {
+ /* nothing */
+ }
+
+ clk_fout_apll.ops = &exynos4_fout_apll_ops;
+ clk_fout_mpll.rate = mpll;
+ clk_fout_epll.rate = epll;
+ clk_fout_vpll.ops = &exynos4_vpll_ops;
+ clk_fout_vpll.rate = vpll;
+
+ printk(KERN_INFO "EXYNOS4: PLL settings, A=%ld, M=%ld, E=%ld V=%ld",
+ apll, mpll, epll, vpll);
+
+ armclk = clk_get_rate(&clk_armclk.clk);
+ sclk_dmc = clk_get_rate(&clk_sclk_dmc.clk);
+
+ aclk_200 = clk_get_rate(&clk_aclk_200.clk);
+ aclk_100 = clk_get_rate(&clk_aclk_100.clk);
+ aclk_160 = clk_get_rate(&clk_aclk_160.clk);
+ aclk_133 = clk_get_rate(&clk_aclk_133.clk);
+
+ printk(KERN_INFO "EXYNOS4: ARMCLK=%ld, DMC=%ld, ACLK200=%ld\n"
+ "ACLK100=%ld, ACLK160=%ld, ACLK133=%ld\n",
+ armclk, sclk_dmc, aclk_200,
+ aclk_100, aclk_160, aclk_133);
+
+ clk_f.rate = armclk;
+ clk_h.rate = sclk_dmc;
+ clk_p.rate = aclk_100;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+ s3c_set_clksrc(&clksrcs[ptr], true);
+}
+
+static struct clk *clks[] __initdata = {
+ &clk_sclk_hdmi27m,
+ &clk_sclk_hdmiphy,
+ &clk_sclk_usbphy0,
+ &clk_sclk_usbphy1,
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos4_clock_suspend(void)
+{
+ s3c_pm_do_save(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
+ return 0;
+}
+
+static void exynos4_clock_resume(void)
+{
+ s3c_pm_do_restore_core(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
+}
+
+#else
+#define exynos4_clock_suspend NULL
+#define exynos4_clock_resume NULL
+#endif
+
+struct syscore_ops exynos4_clock_syscore_ops = {
+ .suspend = exynos4_clock_suspend,
+ .resume = exynos4_clock_resume,
+};
+
+void __init exynos4_register_clocks(void)
+{
+ int ptr;
+
+ s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+ for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+ s3c_register_clksrc(sysclks[ptr], 1);
+
+ for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++)
+ s3c_register_clksrc(sclk_tv[ptr], 1);
+
+ s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+ s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+ s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+
+ register_syscore_ops(&exynos4_clock_syscore_ops);
+ s3c24xx_register_clock(&dummy_apb_pclk);
+
+ s3c_pwmclk_init();
+}
--- /dev/null
+/* linux/arch/arm/mach-exynos/cpu.c
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/sched.h>
+#include <linux/sysdev.h>
+
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/proc-fns.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/exynos4.h>
+#include <plat/adc-core.h>
+#include <plat/sdhci.h>
+#include <plat/fb-core.h>
+#include <plat/fimc-core.h>
+#include <plat/iic-core.h>
+#include <plat/reset.h>
+#include <plat/tv-core.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-pmu.h>
+
+unsigned int gic_bank_offset __read_mostly;
+
+extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
+ unsigned int irq_start);
+extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
+
+/* Initial IO mappings */
+static struct map_desc exynos_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_SYSTIMER,
+ .pfn = __phys_to_pfn(EXYNOS_PA_SYSTIMER),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_PMU,
+ .pfn = __phys_to_pfn(EXYNOS_PA_PMU),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_COMBINER_BASE,
+ .pfn = __phys_to_pfn(EXYNOS_PA_COMBINER),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GIC_CPU,
+ .pfn = __phys_to_pfn(EXYNOS_PA_GIC_CPU),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GIC_DIST,
+ .pfn = __phys_to_pfn(EXYNOS_PA_GIC_DIST),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_UART,
+ .pfn = __phys_to_pfn(S3C_PA_UART),
+ .length = SZ_512K,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct map_desc exynos4_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_CMU,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_CMU),
+ .length = SZ_128K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_COREPERI_BASE,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_COREPERI),
+ .length = SZ_8K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_L2CC,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_L2CC),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GPIO1,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO1),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GPIO2,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO2),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GPIO3,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO3),
+ .length = SZ_256,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_DMC0,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_DMC0),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SROMC,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_SROMC),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_USB_HSPHY,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_HSPHY),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct map_desc exynos4_iodesc0[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_SYSRAM,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM0),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct map_desc exynos4_iodesc1[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_SYSRAM,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM1),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static void exynos_idle(void)
+{
+ if (!need_resched())
+ cpu_do_idle();
+
+ local_irq_enable();
+}
+
+static void exynos4_sw_reset(void)
+{
+ __raw_writel(0x1, S5P_SWRESET);
+}
+
+/*
+ * exynos_map_io
+ *
+ * register the standard cpu IO areas
+ */
+void __init exynos4_map_io(void)
+{
+ iotable_init(exynos_iodesc, ARRAY_SIZE(exynos_iodesc));
+ iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
+
+ if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
+ iotable_init(exynos4_iodesc0, ARRAY_SIZE(exynos4_iodesc0));
+ else
+ iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1));
+
+ /* initialize device information early */
+ exynos4_default_sdhci0();
+ exynos4_default_sdhci1();
+ exynos4_default_sdhci2();
+ exynos4_default_sdhci3();
+
+ s3c_adc_setname("samsung-adc-v3");
+
+ s3c_fimc_setname(0, "exynos4-fimc");
+ s3c_fimc_setname(1, "exynos4-fimc");
+ s3c_fimc_setname(2, "exynos4-fimc");
+ s3c_fimc_setname(3, "exynos4-fimc");
+
+ /* The I2C bus controllers are directly compatible with s3c2440 */
+ s3c_i2c0_setname("s3c2440-i2c");
+ s3c_i2c1_setname("s3c2440-i2c");
+ s3c_i2c2_setname("s3c2440-i2c");
+
+ s5p_fb_setname(0, "exynos4-fb");
+ s5p_hdmi_setname("exynos4-hdmi");
+}
+
+void __init exynos4_init_clocks(int xtal)
+{
+ printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+ s3c24xx_register_baseclocks(xtal);
+ s5p_register_clocks(xtal);
+
+ if (soc_is_exynos4210())
+ exynos4210_register_clocks();
+ else if (soc_is_exynos4212() || soc_is_exynos4412())
+ exynos4212_register_clocks();
+
+ exynos4_register_clocks();
+ exynos4_setup_clocks();
+}
+
+static void exynos4_gic_irq_fix_base(struct irq_data *d)
+{
+ struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
+
+ gic_data->cpu_base = S5P_VA_GIC_CPU +
+ (gic_bank_offset * smp_processor_id());
+
+ gic_data->dist_base = S5P_VA_GIC_DIST +
+ (gic_bank_offset * smp_processor_id());
+}
+
+void __init exynos4_init_irq(void)
+{
+ int irq;
+
+ gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
+
+ gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
+ gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base;
+ gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base;
+ gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base;
+
+ for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
+
+ combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
+ COMBINER_IRQ(irq, 0));
+ combiner_cascade_irq(irq, IRQ_SPI(irq));
+ }
+
+ /* The parameters of s5p_init_irq() are for VIC init.
+ * Theses parameters should be NULL and 0 because EXYNOS4
+ * uses GIC instead of VIC.
+ */
+ s5p_init_irq(NULL, 0);
+}
+
+struct sysdev_class exynos4_sysclass = {
+ .name = "exynos4-core",
+};
+
+static struct sys_device exynos4_sysdev = {
+ .cls = &exynos4_sysclass,
+};
+
+static int __init exynos4_core_init(void)
+{
+ return sysdev_class_register(&exynos4_sysclass);
+}
+core_initcall(exynos4_core_init);
+
+#ifdef CONFIG_CACHE_L2X0
+static int __init exynos4_l2x0_cache_init(void)
+{
+ /* TAG, Data Latency Control: 2cycle */
+ __raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
+
+ if (soc_is_exynos4210())
+ __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+ else if (soc_is_exynos4212() || soc_is_exynos4412())
+ __raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+
+ /* L2X0 Prefetch Control */
+ __raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
+
+ /* L2X0 Power Control */
+ __raw_writel(L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN,
+ S5P_VA_L2CC + L2X0_POWER_CTRL);
+
+ l2x0_init(S5P_VA_L2CC, 0x7C470001, 0xC200ffff);
+
+ return 0;
+}
+
+early_initcall(exynos4_l2x0_cache_init);
+#endif
+
+int __init exynos_init(void)
+{
+ printk(KERN_INFO "EXYNOS: Initializing architecture\n");
+
+ /* set idle function */
+ pm_idle = exynos_idle;
+
+ /* set sw_reset function */
+ if (soc_is_exynos4210() || soc_is_exynos4212() || soc_is_exynos4412())
+ s5p_reset_hook = exynos4_sw_reset;
+
+ return sysdev_register(&exynos4_sysdev);
+}
--- /dev/null
+/* linux/arch/arm/mach-exynos4/cpuidle.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/cpuidle.h>
+#include <linux/io.h>
+
+#include <asm/proc-fns.h>
+
+static int exynos4_enter_idle(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv,
+ int index);
+
+static struct cpuidle_state exynos4_cpuidle_set[] = {
+ [0] = {
+ .enter = exynos4_enter_idle,
+ .exit_latency = 1,
+ .target_residency = 100000,
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .name = "IDLE",
+ .desc = "ARM clock gating(WFI)",
+ },
+};
+
+static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device);
+
+static struct cpuidle_driver exynos4_idle_driver = {
+ .name = "exynos4_idle",
+ .owner = THIS_MODULE,
+};
+
+static int exynos4_enter_idle(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv,
+ int index)
+{
+ struct timeval before, after;
+ int idle_time;
+
+ local_irq_disable();
+ do_gettimeofday(&before);
+
+ cpu_do_idle();
+
+ do_gettimeofday(&after);
+ local_irq_enable();
+ idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
+ (after.tv_usec - before.tv_usec);
+
+ dev->last_residency = idle_time;
+ return index;
+}
+
+static int __init exynos4_init_cpuidle(void)
+{
+ int i, max_cpuidle_state, cpu_id;
+ struct cpuidle_device *device;
+ struct cpuidle_driver *drv = &exynos4_idle_driver;
+
+ /* Setup cpuidle driver */
+ drv->state_count = (sizeof(exynos4_cpuidle_set) /
+ sizeof(struct cpuidle_state));
+ max_cpuidle_state = drv->state_count;
+ for (i = 0; i < max_cpuidle_state; i++) {
+ memcpy(&drv->states[i], &exynos4_cpuidle_set[i],
+ sizeof(struct cpuidle_state));
+ }
+ cpuidle_register_driver(&exynos4_idle_driver);
+
+ for_each_cpu(cpu_id, cpu_online_mask) {
+ device = &per_cpu(exynos4_cpuidle_device, cpu_id);
+ device->cpu = cpu_id;
+
+ device->state_count = drv->state_count;
+
+ if (cpuidle_register_device(device)) {
+ printk(KERN_ERR "CPUidle register device failed\n,");
+ return -EIO;
+ }
+ }
+ return 0;
+}
+device_initcall(exynos4_init_cpuidle);
--- /dev/null
+/* linux/arch/arm/mach-exynos4/dev-ahci.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4 - AHCI support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/ahci_platform.h>
+
+#include <plat/cpu.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+#include <mach/regs-pmu.h>
+
+/* PHY Control Register */
+#define SATA_CTRL0 0x0
+/* PHY Link Control Register */
+#define SATA_CTRL1 0x4
+/* PHY Status Register */
+#define SATA_PHY_STATUS 0x8
+
+#define SATA_CTRL0_RX_DATA_VALID(x) (x << 27)
+#define SATA_CTRL0_SPEED_MODE (1 << 26)
+#define SATA_CTRL0_M_PHY_CAL (1 << 19)
+#define SATA_CTRL0_PHY_CMU_RST_N (1 << 10)
+#define SATA_CTRL0_M_PHY_LN_RST_N (1 << 9)
+#define SATA_CTRL0_PHY_POR_N (1 << 8)
+
+#define SATA_CTRL1_RST_PMALIVE_N (1 << 8)
+#define SATA_CTRL1_RST_RXOOB_N (1 << 7)
+#define SATA_CTRL1_RST_RX_N (1 << 6)
+#define SATA_CTRL1_RST_TX_N (1 << 5)
+
+#define SATA_PHY_STATUS_CMU_OK (1 << 18)
+#define SATA_PHY_STATUS_LANE_OK (1 << 16)
+
+#define LANE0 0x200
+#define COM_LANE 0xA00
+
+#define HOST_PORTS_IMPL 0xC
+#define SCLK_SATA_FREQ (67 * MHZ)
+
+static void __iomem *phy_base, *phy_ctrl;
+
+struct phy_reg {
+ u8 reg;
+ u8 val;
+};
+
+/* SATA PHY setup */
+static const struct phy_reg exynos4_sataphy_cmu[] = {
+ { 0x00, 0x06 }, { 0x02, 0x80 }, { 0x22, 0xa0 }, { 0x23, 0x42 },
+ { 0x2e, 0x04 }, { 0x2f, 0x50 }, { 0x30, 0x70 }, { 0x31, 0x02 },
+ { 0x32, 0x25 }, { 0x33, 0x40 }, { 0x34, 0x01 }, { 0x35, 0x40 },
+ { 0x61, 0x2e }, { 0x63, 0x5e }, { 0x65, 0x42 }, { 0x66, 0xd1 },
+ { 0x67, 0x20 }, { 0x68, 0x28 }, { 0x69, 0x78 }, { 0x6a, 0x04 },
+ { 0x6b, 0xc8 }, { 0x6c, 0x06 },
+};
+
+static const struct phy_reg exynos4_sataphy_lane[] = {
+ { 0x00, 0x02 }, { 0x05, 0x10 }, { 0x06, 0x84 }, { 0x07, 0x04 },
+ { 0x08, 0xe0 }, { 0x10, 0x23 }, { 0x13, 0x05 }, { 0x14, 0x30 },
+ { 0x15, 0x00 }, { 0x17, 0x70 }, { 0x18, 0xf2 }, { 0x19, 0x1e },
+ { 0x1a, 0x18 }, { 0x1b, 0x0d }, { 0x1c, 0x08 }, { 0x50, 0x60 },
+ { 0x51, 0x0f },
+};
+
+static const struct phy_reg exynos4_sataphy_comlane[] = {
+ { 0x01, 0x20 }, { 0x03, 0x40 }, { 0x04, 0x3c }, { 0x05, 0x7d },
+ { 0x06, 0x1d }, { 0x07, 0xcf }, { 0x08, 0x05 }, { 0x09, 0x63 },
+ { 0x0a, 0x29 }, { 0x0b, 0xc4 }, { 0x0c, 0x01 }, { 0x0d, 0x03 },
+ { 0x0e, 0x28 }, { 0x0f, 0x98 }, { 0x10, 0x19 }, { 0x13, 0x80 },
+ { 0x14, 0xf0 }, { 0x15, 0xd0 }, { 0x39, 0xa0 }, { 0x3a, 0xa0 },
+ { 0x3b, 0xa0 }, { 0x3c, 0xa0 }, { 0x3d, 0xa0 }, { 0x3e, 0xa0 },
+ { 0x3f, 0xa0 }, { 0x40, 0x42 }, { 0x42, 0x80 }, { 0x43, 0x58 },
+ { 0x45, 0x44 }, { 0x46, 0x5c }, { 0x47, 0x86 }, { 0x48, 0x8d },
+ { 0x49, 0xd0 }, { 0x4a, 0x09 }, { 0x4b, 0x90 }, { 0x4c, 0x07 },
+ { 0x4d, 0x40 }, { 0x51, 0x20 }, { 0x52, 0x32 }, { 0x7f, 0xd8 },
+ { 0x80, 0x1a }, { 0x81, 0xff }, { 0x82, 0x11 }, { 0x83, 0x00 },
+ { 0x87, 0xf0 }, { 0x87, 0xff }, { 0x87, 0xff }, { 0x87, 0xff },
+ { 0x87, 0xff }, { 0x8c, 0x1c }, { 0x8d, 0xc2 }, { 0x8e, 0xc3 },
+ { 0x8f, 0x3f }, { 0x90, 0x0a }, { 0x96, 0xf8 },
+};
+
+static int wait_for_phy_ready(void __iomem *reg, unsigned long bit)
+{
+ unsigned long timeout;
+
+ /* wait for maximum of 3 sec */
+ timeout = jiffies + msecs_to_jiffies(3000);
+ while (!(__raw_readl(reg) & bit)) {
+ if (time_after(jiffies, timeout))
+ return -1;
+ cpu_relax();
+ }
+ return 0;
+}
+
+static int ahci_phy_init(void __iomem *mmio)
+{
+ int i, ctrl0;
+
+ for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_cmu); i++)
+ __raw_writeb(exynos4_sataphy_cmu[i].val,
+ phy_base + (exynos4_sataphy_cmu[i].reg * 4));
+
+ for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_lane); i++)
+ __raw_writeb(exynos4_sataphy_lane[i].val,
+ phy_base + (LANE0 + exynos4_sataphy_lane[i].reg) * 4);
+
+ for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_comlane); i++)
+ __raw_writeb(exynos4_sataphy_comlane[i].val,
+ phy_base + (COM_LANE + exynos4_sataphy_comlane[i].reg) * 4);
+
+ __raw_writeb(0x07, phy_base);
+
+ ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0);
+ ctrl0 |= SATA_CTRL0_PHY_CMU_RST_N;
+ __raw_writel(ctrl0, phy_ctrl + SATA_CTRL0);
+
+ if (wait_for_phy_ready(phy_ctrl + SATA_PHY_STATUS,
+ SATA_PHY_STATUS_CMU_OK) < 0) {
+ printk(KERN_ERR "PHY CMU not ready\n");
+ return -EBUSY;
+ }
+
+ __raw_writeb(0x03, phy_base + (COM_LANE * 4));
+
+ ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0);
+ ctrl0 |= SATA_CTRL0_M_PHY_LN_RST_N;
+ __raw_writel(ctrl0, phy_ctrl + SATA_CTRL0);
+
+ if (wait_for_phy_ready(phy_ctrl + SATA_PHY_STATUS,
+ SATA_PHY_STATUS_LANE_OK) < 0) {
+ printk(KERN_ERR "PHY LANE not ready\n");
+ return -EBUSY;
+ }
+
+ ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0);
+ ctrl0 |= SATA_CTRL0_M_PHY_CAL;
+ __raw_writel(ctrl0, phy_ctrl + SATA_CTRL0);
+
+ return 0;
+}
+
+static int exynos4_ahci_init(struct device *dev, void __iomem *mmio)
+{
+ struct clk *clk_sata, *clk_sataphy, *clk_sclk_sata;
+ int val, ret;
+
+ phy_base = ioremap(EXYNOS4_PA_SATAPHY, SZ_64K);
+ if (!phy_base) {
+ dev_err(dev, "failed to allocate memory for SATA PHY\n");
+ return -ENOMEM;
+ }
+
+ phy_ctrl = ioremap(EXYNOS4_PA_SATAPHY_CTRL, SZ_16);
+ if (!phy_ctrl) {
+ dev_err(dev, "failed to allocate memory for SATA PHY CTRL\n");
+ ret = -ENOMEM;
+ goto err1;
+ }
+
+ clk_sata = clk_get(dev, "sata");
+ if (IS_ERR(clk_sata)) {
+ dev_err(dev, "failed to get sata clock\n");
+ ret = PTR_ERR(clk_sata);
+ clk_sata = NULL;
+ goto err2;
+
+ }
+ clk_enable(clk_sata);
+
+ clk_sataphy = clk_get(dev, "sataphy");
+ if (IS_ERR(clk_sataphy)) {
+ dev_err(dev, "failed to get sataphy clock\n");
+ ret = PTR_ERR(clk_sataphy);
+ clk_sataphy = NULL;
+ goto err3;
+ }
+ clk_enable(clk_sataphy);
+
+ clk_sclk_sata = clk_get(dev, "sclk_sata");
+ if (IS_ERR(clk_sclk_sata)) {
+ dev_err(dev, "failed to get sclk_sata\n");
+ ret = PTR_ERR(clk_sclk_sata);
+ clk_sclk_sata = NULL;
+ goto err4;
+ }
+ clk_enable(clk_sclk_sata);
+ clk_set_rate(clk_sclk_sata, SCLK_SATA_FREQ);
+
+ __raw_writel(S5P_PMU_SATA_PHY_CONTROL_EN, S5P_PMU_SATA_PHY_CONTROL);
+
+ /* Enable PHY link control */
+ val = SATA_CTRL1_RST_PMALIVE_N | SATA_CTRL1_RST_RXOOB_N |
+ SATA_CTRL1_RST_RX_N | SATA_CTRL1_RST_TX_N;
+ __raw_writel(val, phy_ctrl + SATA_CTRL1);
+
+ /* Set communication speed as 3Gbps and enable PHY power */
+ val = SATA_CTRL0_RX_DATA_VALID(3) | SATA_CTRL0_SPEED_MODE |
+ SATA_CTRL0_PHY_POR_N;
+ __raw_writel(val, phy_ctrl + SATA_CTRL0);
+
+ /* Port0 is available */
+ __raw_writel(0x1, mmio + HOST_PORTS_IMPL);
+
+ return ahci_phy_init(mmio);
+
+err4:
+ clk_disable(clk_sataphy);
+ clk_put(clk_sataphy);
+err3:
+ clk_disable(clk_sata);
+ clk_put(clk_sata);
+err2:
+ iounmap(phy_ctrl);
+err1:
+ iounmap(phy_base);
+
+ return ret;
+}
+
+static struct ahci_platform_data exynos4_ahci_pdata = {
+ .init = exynos4_ahci_init,
+};
+
+static struct resource exynos4_ahci_resource[] = {
+ [0] = {
+ .start = EXYNOS4_PA_SATA,
+ .end = EXYNOS4_PA_SATA + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_SATA,
+ .end = IRQ_SATA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 exynos4_ahci_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device exynos4_device_ahci = {
+ .name = "ahci",
+ .id = -1,
+ .resource = exynos4_ahci_resource,
+ .num_resources = ARRAY_SIZE(exynos4_ahci_resource),
+ .dev = {
+ .platform_data = &exynos4_ahci_pdata,
+ .dma_mask = &exynos4_ahci_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
--- /dev/null
+/* linux/arch/arm/mach-exynos4/dev-audio.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/audio.h>
+
+#include <mach/map.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
+#include <mach/regs-audss.h>
+
+static const char *rclksrc[] = {
+ [0] = "busclk",
+ [1] = "i2sclk",
+};
+
+static int exynos4_cfg_i2s(struct platform_device *pdev)
+{
+ /* configure GPIO for i2s port */
+ switch (pdev->id) {
+ case 0:
+ s3c_gpio_cfgpin_range(EXYNOS4_GPZ(0), 7, S3C_GPIO_SFN(2));
+ break;
+ case 1:
+ s3c_gpio_cfgpin_range(EXYNOS4_GPC0(0), 5, S3C_GPIO_SFN(2));
+ break;
+ case 2:
+ s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 5, S3C_GPIO_SFN(4));
+ break;
+ default:
+ printk(KERN_ERR "Invalid Device %d\n", pdev->id);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct s3c_audio_pdata i2sv5_pdata = {
+ .cfg_gpio = exynos4_cfg_i2s,
+ .type = {
+ .i2s = {
+ .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI
+ | QUIRK_NEED_RSTCLR,
+ .src_clk = rclksrc,
+ .idma_addr = EXYNOS4_AUDSS_INT_MEM,
+ },
+ },
+};
+
+static struct resource exynos4_i2s0_resource[] = {
+ [0] = {
+ .start = EXYNOS4_PA_I2S0,
+ .end = EXYNOS4_PA_I2S0 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_I2S0_TX,
+ .end = DMACH_I2S0_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_I2S0_RX,
+ .end = DMACH_I2S0_RX,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = DMACH_I2S0S_TX,
+ .end = DMACH_I2S0S_TX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device exynos4_device_i2s0 = {
+ .name = "samsung-i2s",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(exynos4_i2s0_resource),
+ .resource = exynos4_i2s0_resource,
+ .dev = {
+ .platform_data = &i2sv5_pdata,
+ },
+};
+
+static const char *rclksrc_v3[] = {
+ [0] = "sclk_i2s",
+ [1] = "no_such_clock",
+};
+
+static struct s3c_audio_pdata i2sv3_pdata = {
+ .cfg_gpio = exynos4_cfg_i2s,
+ .type = {
+ .i2s = {
+ .quirks = QUIRK_NO_MUXPSR,
+ .src_clk = rclksrc_v3,
+ },
+ },
+};
+
+static struct resource exynos4_i2s1_resource[] = {
+ [0] = {
+ .start = EXYNOS4_PA_I2S1,
+ .end = EXYNOS4_PA_I2S1 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_I2S1_TX,
+ .end = DMACH_I2S1_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_I2S1_RX,
+ .end = DMACH_I2S1_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device exynos4_device_i2s1 = {
+ .name = "samsung-i2s",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(exynos4_i2s1_resource),
+ .resource = exynos4_i2s1_resource,
+ .dev = {
+ .platform_data = &i2sv3_pdata,
+ },
+};
+
+static struct resource exynos4_i2s2_resource[] = {
+ [0] = {
+ .start = EXYNOS4_PA_I2S2,
+ .end = EXYNOS4_PA_I2S2 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_I2S2_TX,
+ .end = DMACH_I2S2_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_I2S2_RX,
+ .end = DMACH_I2S2_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device exynos4_device_i2s2 = {
+ .name = "samsung-i2s",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(exynos4_i2s2_resource),
+ .resource = exynos4_i2s2_resource,
+ .dev = {
+ .platform_data = &i2sv3_pdata,
+ },
+};
+
+/* PCM Controller platform_devices */
+
+static int exynos4_pcm_cfg_gpio(struct platform_device *pdev)
+{
+ switch (pdev->id) {
+ case 0:
+ s3c_gpio_cfgpin_range(EXYNOS4_GPZ(0), 5, S3C_GPIO_SFN(3));
+ break;
+ case 1:
+ s3c_gpio_cfgpin_range(EXYNOS4_GPC0(0), 5, S3C_GPIO_SFN(3));
+ break;
+ case 2:
+ s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 5, S3C_GPIO_SFN(3));
+ break;
+ default:
+ printk(KERN_DEBUG "Invalid PCM Controller number!");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct s3c_audio_pdata s3c_pcm_pdata = {
+ .cfg_gpio = exynos4_pcm_cfg_gpio,
+};
+
+static struct resource exynos4_pcm0_resource[] = {
+ [0] = {
+ .start = EXYNOS4_PA_PCM0,
+ .end = EXYNOS4_PA_PCM0 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_PCM0_TX,
+ .end = DMACH_PCM0_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_PCM0_RX,
+ .end = DMACH_PCM0_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device exynos4_device_pcm0 = {
+ .name = "samsung-pcm",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(exynos4_pcm0_resource),
+ .resource = exynos4_pcm0_resource,
+ .dev = {
+ .platform_data = &s3c_pcm_pdata,
+ },
+};
+
+static struct resource exynos4_pcm1_resource[] = {
+ [0] = {
+ .start = EXYNOS4_PA_PCM1,
+ .end = EXYNOS4_PA_PCM1 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_PCM1_TX,
+ .end = DMACH_PCM1_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_PCM1_RX,
+ .end = DMACH_PCM1_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device exynos4_device_pcm1 = {
+ .name = "samsung-pcm",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(exynos4_pcm1_resource),
+ .resource = exynos4_pcm1_resource,
+ .dev = {
+ .platform_data = &s3c_pcm_pdata,
+ },
+};
+
+static struct resource exynos4_pcm2_resource[] = {
+ [0] = {
+ .start = EXYNOS4_PA_PCM2,
+ .end = EXYNOS4_PA_PCM2 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_PCM2_TX,
+ .end = DMACH_PCM2_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_PCM2_RX,
+ .end = DMACH_PCM2_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device exynos4_device_pcm2 = {
+ .name = "samsung-pcm",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(exynos4_pcm2_resource),
+ .resource = exynos4_pcm2_resource,
+ .dev = {
+ .platform_data = &s3c_pcm_pdata,
+ },
+};
+
+/* AC97 Controller platform devices */
+
+static int exynos4_ac97_cfg_gpio(struct platform_device *pdev)
+{
+ return s3c_gpio_cfgpin_range(EXYNOS4_GPC0(0), 5, S3C_GPIO_SFN(4));
+}
+
+static struct resource exynos4_ac97_resource[] = {
+ [0] = {
+ .start = EXYNOS4_PA_AC97,
+ .end = EXYNOS4_PA_AC97 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_AC97_PCMOUT,
+ .end = DMACH_AC97_PCMOUT,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_AC97_PCMIN,
+ .end = DMACH_AC97_PCMIN,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = DMACH_AC97_MICIN,
+ .end = DMACH_AC97_MICIN,
+ .flags = IORESOURCE_DMA,
+ },
+ [4] = {
+ .start = IRQ_AC97,
+ .end = IRQ_AC97,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct s3c_audio_pdata s3c_ac97_pdata = {
+ .cfg_gpio = exynos4_ac97_cfg_gpio,
+};
+
+static u64 exynos4_ac97_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device exynos4_device_ac97 = {
+ .name = "samsung-ac97",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(exynos4_ac97_resource),
+ .resource = exynos4_ac97_resource,
+ .dev = {
+ .platform_data = &s3c_ac97_pdata,
+ .dma_mask = &exynos4_ac97_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+/* S/PDIF Controller platform_device */
+
+static int exynos4_spdif_cfg_gpio(struct platform_device *pdev)
+{
+ s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 2, S3C_GPIO_SFN(4));
+
+ return 0;
+}
+
+static struct resource exynos4_spdif_resource[] = {
+ [0] = {
+ .start = EXYNOS4_PA_SPDIF,
+ .end = EXYNOS4_PA_SPDIF + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_SPDIF,
+ .end = DMACH_SPDIF,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct s3c_audio_pdata samsung_spdif_pdata = {
+ .cfg_gpio = exynos4_spdif_cfg_gpio,
+};
+
+static u64 exynos4_spdif_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device exynos4_device_spdif = {
+ .name = "samsung-spdif",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(exynos4_spdif_resource),
+ .resource = exynos4_spdif_resource,
+ .dev = {
+ .platform_data = &samsung_spdif_pdata,
+ .dma_mask = &exynos4_spdif_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
--- /dev/null
+/*
+ * linux/arch/arm/mach-exynos4/dev-dwmci.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Platform device for Synopsys DesignWare Mobile Storage IP
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mmc/dw_mmc.h>
+
+#include <plat/devs.h>
+
+#include <mach/map.h>
+
+static int exynos4_dwmci_get_bus_wd(u32 slot_id)
+{
+ return 4;
+}
+
+static int exynos4_dwmci_init(u32 slot_id, irq_handler_t handler, void *data)
+{
+ return 0;
+}
+
+static struct resource exynos4_dwmci_resource[] = {
+ [0] = {
+ .start = EXYNOS4_PA_DWMCI,
+ .end = EXYNOS4_PA_DWMCI + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_DWMCI,
+ .end = IRQ_DWMCI,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct dw_mci_board exynos4_dwci_pdata = {
+ .num_slots = 1,
+ .quirks = DW_MCI_QUIRK_BROKEN_CARD_DETECTION,
+ .bus_hz = 80 * 1000 * 1000,
+ .detect_delay_ms = 200,
+ .init = exynos4_dwmci_init,
+ .get_bus_wd = exynos4_dwmci_get_bus_wd,
+};
+
+static u64 exynos4_dwmci_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device exynos4_device_dwmci = {
+ .name = "dw_mmc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(exynos4_dwmci_resource),
+ .resource = exynos4_dwmci_resource,
+ .dev = {
+ .dma_mask = &exynos4_dwmci_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &exynos4_dwci_pdata,
+ },
+};
+
+void __init exynos4_dwmci_set_platdata(struct dw_mci_board *pd)
+{
+ struct dw_mci_board *npd;
+
+ npd = s3c_set_platdata(pd, sizeof(struct dw_mci_board),
+ &exynos4_device_dwmci);
+
+ if (!npd->init)
+ npd->init = exynos4_dwmci_init;
+ if (!npd->get_bus_wd)
+ npd->get_bus_wd = exynos4_dwmci_get_bus_wd;
+}
--- /dev/null
+/* linux/arch/arm/mach-exynos4/dev-pd.c
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4 - Power Domain support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+
+#include <mach/regs-pmu.h>
+
+#include <plat/pd.h>
+
+static int exynos4_pd_enable(struct device *dev)
+{
+ struct samsung_pd_info *pdata = dev->platform_data;
+ u32 timeout;
+
+ __raw_writel(S5P_INT_LOCAL_PWR_EN, pdata->base);
+
+ /* Wait max 1ms */
+ timeout = 10;
+ while ((__raw_readl(pdata->base + 0x4) & S5P_INT_LOCAL_PWR_EN)
+ != S5P_INT_LOCAL_PWR_EN) {
+ if (timeout == 0) {
+ printk(KERN_ERR "Power domain %s enable failed.\n",
+ dev_name(dev));
+ return -ETIMEDOUT;
+ }
+ timeout--;
+ udelay(100);
+ }
+
+ return 0;
+}
+
+static int exynos4_pd_disable(struct device *dev)
+{
+ struct samsung_pd_info *pdata = dev->platform_data;
+ u32 timeout;
+
+ __raw_writel(0, pdata->base);
+
+ /* Wait max 1ms */
+ timeout = 10;
+ while (__raw_readl(pdata->base + 0x4) & S5P_INT_LOCAL_PWR_EN) {
+ if (timeout == 0) {
+ printk(KERN_ERR "Power domain %s disable failed.\n",
+ dev_name(dev));
+ return -ETIMEDOUT;
+ }
+ timeout--;
+ udelay(100);
+ }
+
+ return 0;
+}
+
+struct platform_device exynos4_device_pd[] = {
+ {
+ .name = "samsung-pd",
+ .id = 0,
+ .dev = {
+ .platform_data = &(struct samsung_pd_info) {
+ .enable = exynos4_pd_enable,
+ .disable = exynos4_pd_disable,
+ .base = S5P_PMU_MFC_CONF,
+ },
+ },
+ }, {
+ .name = "samsung-pd",
+ .id = 1,
+ .dev = {
+ .platform_data = &(struct samsung_pd_info) {
+ .enable = exynos4_pd_enable,
+ .disable = exynos4_pd_disable,
+ .base = S5P_PMU_G3D_CONF,
+ },
+ },
+ }, {
+ .name = "samsung-pd",
+ .id = 2,
+ .dev = {
+ .platform_data = &(struct samsung_pd_info) {
+ .enable = exynos4_pd_enable,
+ .disable = exynos4_pd_disable,
+ .base = S5P_PMU_LCD0_CONF,
+ },
+ },
+ }, {
+ .name = "samsung-pd",
+ .id = 3,
+ .dev = {
+ .platform_data = &(struct samsung_pd_info) {
+ .enable = exynos4_pd_enable,
+ .disable = exynos4_pd_disable,
+ .base = S5P_PMU_LCD1_CONF,
+ },
+ },
+ }, {
+ .name = "samsung-pd",
+ .id = 4,
+ .dev = {
+ .platform_data = &(struct samsung_pd_info) {
+ .enable = exynos4_pd_enable,
+ .disable = exynos4_pd_disable,
+ .base = S5P_PMU_TV_CONF,
+ },
+ },
+ }, {
+ .name = "samsung-pd",
+ .id = 5,
+ .dev = {
+ .platform_data = &(struct samsung_pd_info) {
+ .enable = exynos4_pd_enable,
+ .disable = exynos4_pd_disable,
+ .base = S5P_PMU_CAM_CONF,
+ },
+ },
+ }, {
+ .name = "samsung-pd",
+ .id = 6,
+ .dev = {
+ .platform_data = &(struct samsung_pd_info) {
+ .enable = exynos4_pd_enable,
+ .disable = exynos4_pd_disable,
+ .base = S5P_PMU_GPS_CONF,
+ },
+ },
+ },
+};
--- /dev/null
+/* linux/arch/arm/mach-exynos4/dev-sysmmu.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4 - System MMU support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/export.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+#include <mach/sysmmu.h>
+#include <plat/s5p-clock.h>
+
+/* These names must be equal to the clock names in mach-exynos4/clock.c */
+const char *sysmmu_ips_name[EXYNOS4_SYSMMU_TOTAL_IPNUM] = {
+ "SYSMMU_MDMA" ,
+ "SYSMMU_SSS" ,
+ "SYSMMU_FIMC0" ,
+ "SYSMMU_FIMC1" ,
+ "SYSMMU_FIMC2" ,
+ "SYSMMU_FIMC3" ,
+ "SYSMMU_JPEG" ,
+ "SYSMMU_FIMD0" ,
+ "SYSMMU_FIMD1" ,
+ "SYSMMU_PCIe" ,
+ "SYSMMU_G2D" ,
+ "SYSMMU_ROTATOR",
+ "SYSMMU_MDMA2" ,
+ "SYSMMU_TV" ,
+ "SYSMMU_MFC_L" ,
+ "SYSMMU_MFC_R" ,
+};
+
+static struct resource exynos4_sysmmu_resource[] = {
+ [0] = {
+ .start = EXYNOS4_PA_SYSMMU_MDMA,
+ .end = EXYNOS4_PA_SYSMMU_MDMA + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_SYSMMU_MDMA0_0,
+ .end = IRQ_SYSMMU_MDMA0_0,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = EXYNOS4_PA_SYSMMU_SSS,
+ .end = EXYNOS4_PA_SYSMMU_SSS + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [3] = {
+ .start = IRQ_SYSMMU_SSS_0,
+ .end = IRQ_SYSMMU_SSS_0,
+ .flags = IORESOURCE_IRQ,
+ },
+ [4] = {
+ .start = EXYNOS4_PA_SYSMMU_FIMC0,
+ .end = EXYNOS4_PA_SYSMMU_FIMC0 + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [5] = {
+ .start = IRQ_SYSMMU_FIMC0_0,
+ .end = IRQ_SYSMMU_FIMC0_0,
+ .flags = IORESOURCE_IRQ,
+ },
+ [6] = {
+ .start = EXYNOS4_PA_SYSMMU_FIMC1,
+ .end = EXYNOS4_PA_SYSMMU_FIMC1 + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [7] = {
+ .start = IRQ_SYSMMU_FIMC1_0,
+ .end = IRQ_SYSMMU_FIMC1_0,
+ .flags = IORESOURCE_IRQ,
+ },
+ [8] = {
+ .start = EXYNOS4_PA_SYSMMU_FIMC2,
+ .end = EXYNOS4_PA_SYSMMU_FIMC2 + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [9] = {
+ .start = IRQ_SYSMMU_FIMC2_0,
+ .end = IRQ_SYSMMU_FIMC2_0,
+ .flags = IORESOURCE_IRQ,
+ },
+ [10] = {
+ .start = EXYNOS4_PA_SYSMMU_FIMC3,
+ .end = EXYNOS4_PA_SYSMMU_FIMC3 + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [11] = {
+ .start = IRQ_SYSMMU_FIMC3_0,
+ .end = IRQ_SYSMMU_FIMC3_0,
+ .flags = IORESOURCE_IRQ,
+ },
+ [12] = {
+ .start = EXYNOS4_PA_SYSMMU_JPEG,
+ .end = EXYNOS4_PA_SYSMMU_JPEG + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [13] = {
+ .start = IRQ_SYSMMU_JPEG_0,
+ .end = IRQ_SYSMMU_JPEG_0,
+ .flags = IORESOURCE_IRQ,
+ },
+ [14] = {
+ .start = EXYNOS4_PA_SYSMMU_FIMD0,
+ .end = EXYNOS4_PA_SYSMMU_FIMD0 + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [15] = {
+ .start = IRQ_SYSMMU_LCD0_M0_0,
+ .end = IRQ_SYSMMU_LCD0_M0_0,
+ .flags = IORESOURCE_IRQ,
+ },
+ [16] = {
+ .start = EXYNOS4_PA_SYSMMU_FIMD1,
+ .end = EXYNOS4_PA_SYSMMU_FIMD1 + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [17] = {
+ .start = IRQ_SYSMMU_LCD1_M1_0,
+ .end = IRQ_SYSMMU_LCD1_M1_0,
+ .flags = IORESOURCE_IRQ,
+ },
+ [18] = {
+ .start = EXYNOS4_PA_SYSMMU_PCIe,
+ .end = EXYNOS4_PA_SYSMMU_PCIe + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [19] = {
+ .start = IRQ_SYSMMU_PCIE_0,
+ .end = IRQ_SYSMMU_PCIE_0,
+ .flags = IORESOURCE_IRQ,
+ },
+ [20] = {
+ .start = EXYNOS4_PA_SYSMMU_G2D,
+ .end = EXYNOS4_PA_SYSMMU_G2D + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [21] = {
+ .start = IRQ_SYSMMU_2D_0,
+ .end = IRQ_SYSMMU_2D_0,
+ .flags = IORESOURCE_IRQ,
+ },
+ [22] = {
+ .start = EXYNOS4_PA_SYSMMU_ROTATOR,
+ .end = EXYNOS4_PA_SYSMMU_ROTATOR + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [23] = {
+ .start = IRQ_SYSMMU_ROTATOR_0,
+ .end = IRQ_SYSMMU_ROTATOR_0,
+ .flags = IORESOURCE_IRQ,
+ },
+ [24] = {
+ .start = EXYNOS4_PA_SYSMMU_MDMA2,
+ .end = EXYNOS4_PA_SYSMMU_MDMA2 + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [25] = {
+ .start = IRQ_SYSMMU_MDMA1_0,
+ .end = IRQ_SYSMMU_MDMA1_0,
+ .flags = IORESOURCE_IRQ,
+ },
+ [26] = {
+ .start = EXYNOS4_PA_SYSMMU_TV,
+ .end = EXYNOS4_PA_SYSMMU_TV + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [27] = {
+ .start = IRQ_SYSMMU_TV_M0_0,
+ .end = IRQ_SYSMMU_TV_M0_0,
+ .flags = IORESOURCE_IRQ,
+ },
+ [28] = {
+ .start = EXYNOS4_PA_SYSMMU_MFC_L,
+ .end = EXYNOS4_PA_SYSMMU_MFC_L + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [29] = {
+ .start = IRQ_SYSMMU_MFC_M0_0,
+ .end = IRQ_SYSMMU_MFC_M0_0,
+ .flags = IORESOURCE_IRQ,
+ },
+ [30] = {
+ .start = EXYNOS4_PA_SYSMMU_MFC_R,
+ .end = EXYNOS4_PA_SYSMMU_MFC_R + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [31] = {
+ .start = IRQ_SYSMMU_MFC_M1_0,
+ .end = IRQ_SYSMMU_MFC_M1_0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device exynos4_device_sysmmu = {
+ .name = "s5p-sysmmu",
+ .id = 32,
+ .num_resources = ARRAY_SIZE(exynos4_sysmmu_resource),
+ .resource = exynos4_sysmmu_resource,
+};
+EXPORT_SYMBOL(exynos4_device_sysmmu);
+
+static struct clk *sysmmu_clk[S5P_SYSMMU_TOTAL_IPNUM];
+void sysmmu_clk_init(struct device *dev, sysmmu_ips ips)
+{
+ sysmmu_clk[ips] = clk_get(dev, sysmmu_ips_name[ips]);
+ if (IS_ERR(sysmmu_clk[ips]))
+ sysmmu_clk[ips] = NULL;
+ else
+ clk_put(sysmmu_clk[ips]);
+}
+
+void sysmmu_clk_enable(sysmmu_ips ips)
+{
+ if (sysmmu_clk[ips])
+ clk_enable(sysmmu_clk[ips]);
+}
+
+void sysmmu_clk_disable(sysmmu_ips ips)
+{
+ if (sysmmu_clk[ips])
+ clk_disable(sysmmu_clk[ips]);
+}
--- /dev/null
+/* linux/arch/arm/mach-exynos4/dma.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl330.h>
+
+#include <asm/irq.h>
+#include <plat/devs.h>
+#include <plat/irqs.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+#include <mach/dma.h>
+
+static u64 dma_dmamask = DMA_BIT_MASK(32);
+
+struct dma_pl330_peri pdma0_peri[28] = {
+ {
+ .peri_id = (u8)DMACH_PCM0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_PCM0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_PCM2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_PCM2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_MSM_REQ0,
+ }, {
+ .peri_id = (u8)DMACH_MSM_REQ2,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S0S_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART4_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART4_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS4_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS4_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_AC97_MICIN,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_AC97_PCMIN,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_AC97_PCMOUT,
+ .rqtype = MEMTODEV,
+ },
+};
+
+struct dma_pl330_platdata exynos4_pdma0_pdata = {
+ .nr_valid_peri = ARRAY_SIZE(pdma0_peri),
+ .peri = pdma0_peri,
+};
+
+struct amba_device exynos4_device_pdma0 = {
+ .dev = {
+ .init_name = "dma-pl330.0",
+ .dma_mask = &dma_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &exynos4_pdma0_pdata,
+ },
+ .res = {
+ .start = EXYNOS4_PA_PDMA0,
+ .end = EXYNOS4_PA_PDMA0 + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = {IRQ_PDMA0, NO_IRQ},
+ .periphid = 0x00041330,
+};
+
+struct dma_pl330_peri pdma1_peri[25] = {
+ {
+ .peri_id = (u8)DMACH_PCM0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_PCM0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_PCM1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_PCM1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_MSM_REQ1,
+ }, {
+ .peri_id = (u8)DMACH_MSM_REQ3,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S0S_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART3_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART3_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS3_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS3_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS5_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SLIMBUS5_TX,
+ .rqtype = MEMTODEV,
+ },
+};
+
+struct dma_pl330_platdata exynos4_pdma1_pdata = {
+ .nr_valid_peri = ARRAY_SIZE(pdma1_peri),
+ .peri = pdma1_peri,
+};
+
+struct amba_device exynos4_device_pdma1 = {
+ .dev = {
+ .init_name = "dma-pl330.1",
+ .dma_mask = &dma_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &exynos4_pdma1_pdata,
+ },
+ .res = {
+ .start = EXYNOS4_PA_PDMA1,
+ .end = EXYNOS4_PA_PDMA1 + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = {IRQ_PDMA1, NO_IRQ},
+ .periphid = 0x00041330,
+};
+
+static int __init exynos4_dma_init(void)
+{
+ amba_device_register(&exynos4_device_pdma0, &iomem_resource);
+ amba_device_register(&exynos4_device_pdma1, &iomem_resource);
+
+ return 0;
+}
+arch_initcall(exynos4_dma_init);
--- /dev/null
+/*
+ * linux/arch/arm/mach-exynos4/headsmp.S
+ *
+ * Cloned from linux/arch/arm/mach-realview/headsmp.S
+ *
+ * Copyright (c) 2003 ARM Limited
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+ __CPUINIT
+
+/*
+ * exynos4 specific entry point for secondary CPUs. This provides
+ * a "holding pen" into which all secondary cores are held until we're
+ * ready for them to initialise.
+ */
+ENTRY(exynos4_secondary_startup)
+ mrc p15, 0, r0, c0, c0, 5
+ and r0, r0, #15
+ adr r4, 1f
+ ldmia r4, {r5, r6}
+ sub r4, r4, r5
+ add r6, r6, r4
+pen: ldr r7, [r6]
+ cmp r7, r0
+ bne pen
+
+ /*
+ * we've been released from the holding pen: secondary_stack
+ * should now contain the SVC stack for this core
+ */
+ b secondary_startup
+
+1: .long .
+ .long pen_release
--- /dev/null
+/* linux arch/arm/mach-exynos4/hotplug.c
+ *
+ * Cloned from linux/arch/arm/mach-realview/hotplug.c
+ *
+ * Copyright (C) 2002 ARM Ltd.
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+
+#include <mach/regs-pmu.h>
+
+extern volatile int pen_release;
+
+static inline void cpu_enter_lowpower(void)
+{
+ unsigned int v;
+
+ flush_cache_all();
+ asm volatile(
+ " mcr p15, 0, %1, c7, c5, 0\n"
+ " mcr p15, 0, %1, c7, c10, 4\n"
+ /*
+ * Turn off coherency
+ */
+ " mrc p15, 0, %0, c1, c0, 1\n"
+ " bic %0, %0, %3\n"
+ " mcr p15, 0, %0, c1, c0, 1\n"
+ " mrc p15, 0, %0, c1, c0, 0\n"
+ " bic %0, %0, %2\n"
+ " mcr p15, 0, %0, c1, c0, 0\n"
+ : "=&r" (v)
+ : "r" (0), "Ir" (CR_C), "Ir" (0x40)
+ : "cc");
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+ unsigned int v;
+
+ asm volatile(
+ "mrc p15, 0, %0, c1, c0, 0\n"
+ " orr %0, %0, %1\n"
+ " mcr p15, 0, %0, c1, c0, 0\n"
+ " mrc p15, 0, %0, c1, c0, 1\n"
+ " orr %0, %0, %2\n"
+ " mcr p15, 0, %0, c1, c0, 1\n"
+ : "=&r" (v)
+ : "Ir" (CR_C), "Ir" (0x40)
+ : "cc");
+}
+
+static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
+{
+ for (;;) {
+
+ /* make cpu1 to be turned off at next WFI command */
+ if (cpu == 1)
+ __raw_writel(0, S5P_ARM_CORE1_CONFIGURATION);
+
+ /*
+ * here's the WFI
+ */
+ asm(".word 0xe320f003\n"
+ :
+ :
+ : "memory", "cc");
+
+ if (pen_release == cpu_logical_map(cpu)) {
+ /*
+ * OK, proper wakeup, we're done
+ */
+ break;
+ }
+
+ /*
+ * Getting here, means that we have come out of WFI without
+ * having been woken up - this shouldn't happen
+ *
+ * Just note it happening - when we're woken, we can report
+ * its occurrence.
+ */
+ (*spurious)++;
+ }
+}
+
+int platform_cpu_kill(unsigned int cpu)
+{
+ return 1;
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void platform_cpu_die(unsigned int cpu)
+{
+ int spurious = 0;
+
+ /*
+ * we're ready for shutdown now, so do it
+ */
+ cpu_enter_lowpower();
+ platform_do_lowpower(cpu, &spurious);
+
+ /*
+ * bring this CPU back into the world of cache
+ * coherency, and then restore interrupts
+ */
+ cpu_leave_lowpower();
+
+ if (spurious)
+ pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+ /*
+ * we don't allow CPU 0 to be shutdown (it is still too special
+ * e.g. clock tick interrupts)
+ */
+ return cpu == 0 ? -EPERM : 0;
+}
--- /dev/null
+/* linux/arch/arm/mach-exynos4/include/mach/debug-macro.S
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+
+ /* note, for the boot process to work we have to keep the UART
+ * virtual address aligned to an 1MiB boundary for the L1
+ * mapping the head code makes. We keep the UART virtual address
+ * aligned and add in the offset when we load the value here.
+ */
+
+ .macro addruart, rp, rv, tmp
+ ldr \rp, = S3C_PA_UART
+ ldr \rv, = S3C_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+ add \rp, \rp, #(0x10000 * CONFIG_DEBUG_S3C_UART)
+ add \rv, \rv, #(0x10000 * CONFIG_DEBUG_S3C_UART)
+#endif
+ .endm
+
+#define fifo_full fifo_full_s5pv210
+#define fifo_level fifo_level_s5pv210
+
+#include <plat/debug-macro.S>
--- /dev/null
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MACH_DMA_H
+#define __MACH_DMA_H
+
+/* This platform uses the common DMA API driver for PL330 */
+#include <plat/dma-pl330.h>
+
+#endif /* __MACH_DMA_H */
--- /dev/null
+/* linux/arch/arm/mach-exynos4/include/mach/dwmci.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Synopsys DesignWare Mobile Storage for EXYNOS4210
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_ARCH_DWMCI_H
+#define __ASM_ARM_ARCH_DWMCI_H __FILE__
+
+#include <linux/mmc/dw_mmc.h>
+
+extern void exynos4_dwmci_set_platdata(struct dw_mci_board *pd);
+
+#endif /* __ASM_ARM_ARCH_DWMCI_H */
--- /dev/null
+/* arch/arm/mach-exynos4/include/mach/entry-macro.S
+ *
+ * Cloned from arch/arm/mach-realview/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for EXYNOS4 platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <asm/hardware/gic.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ mov \tmp, #0
+
+ mrc p15, 0, \base, c0, c0, 5
+ and \base, \base, #3
+ cmp \base, #0
+ beq 1f
+
+ ldr \tmp, =gic_bank_offset
+ ldr \tmp, [\tmp]
+ cmp \base, #1
+ beq 1f
+
+ cmp \base, #2
+ addeq \tmp, \tmp, \tmp
+ addne \tmp, \tmp, \tmp, LSL #1
+
+1: ldr \base, =gic_cpu_base_addr
+ ldr \base, [\base]
+ add \base, \base, \tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ /*
+ * The interrupt numbering scheme is defined in the
+ * interrupt controller spec. To wit:
+ *
+ * Interrupts 0-15 are IPI
+ * 16-28 are reserved
+ * 29-31 are local. We allow 30 to be used for the watchdog.
+ * 32-1020 are global
+ * 1021-1022 are reserved
+ * 1023 is "spurious" (no interrupt)
+ *
+ * For now, we ignore all local interrupts so only return an interrupt if it's
+ * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs.
+ *
+ * A simple read from the controller will tell us the number of the highest
+ * priority enabled interrupt. We then just need to check whether it is in the
+ * valid range for an IRQ (30-1020 inclusive).
+ */
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+ ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
+
+ ldr \tmp, =1021
+
+ bic \irqnr, \irqstat, #0x1c00
+
+ cmp \irqnr, #15
+ cmpcc \irqnr, \irqnr
+ cmpne \irqnr, \tmp
+ cmpcs \irqnr, \irqnr
+ addne \irqnr, \irqnr, #32
+
+ .endm
+
+ /* We assume that irqstat (the raw value of the IRQ acknowledge
+ * register) is preserved from the macro above.
+ * If there is an IPI, we immediately signal end of interrupt on the
+ * controller, since this requires the original irqstat value which
+ * we won't easily be able to recreate later.
+ */
+
+ .macro test_for_ipi, irqnr, irqstat, base, tmp
+ bic \irqnr, \irqstat, #0x1c00
+ cmp \irqnr, #16
+ strcc \irqstat, [\base, #GIC_CPU_EOI]
+ cmpcs \irqnr, \irqnr
+ .endm
--- /dev/null
+/*
+ * linux/arch/arm/mach-exynos4/include/mach/exynos4-clock.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Header file for exynos4 clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_CLOCK_H
+#define __ASM_ARCH_CLOCK_H __FILE__
+
+#include <linux/clk.h>
+
+extern struct clk clk_sclk_hdmi27m;
+extern struct clk clk_sclk_usbphy0;
+extern struct clk clk_sclk_usbphy1;
+extern struct clk clk_sclk_hdmiphy;
+
+extern struct clksrc_clk clk_sclk_apll;
+extern struct clksrc_clk clk_mout_mpll;
+extern struct clksrc_clk clk_aclk_133;
+extern struct clksrc_clk clk_mout_epll;
+extern struct clksrc_clk clk_sclk_vpll;
+
+extern struct clk *clkset_corebus_list[];
+extern struct clksrc_sources clkset_mout_corebus;
+
+extern struct clk *clkset_aclk_top_list[];
+extern struct clksrc_sources clkset_aclk;
+
+extern struct clk *clkset_group_list[];
+extern struct clksrc_sources clkset_group;
+
+extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable);
+extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable);
+extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable);
+
+#endif /* __ASM_ARCH_CLOCK_H */
--- /dev/null
+/* linux/arch/arm/mach-exynos4/include/mach/gpio.h
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H __FILE__
+
+/* Practically, GPIO banks up to GPZ are the configurable gpio banks */
+
+/* GPIO bank sizes */
+#define EXYNOS4_GPIO_A0_NR (8)
+#define EXYNOS4_GPIO_A1_NR (6)
+#define EXYNOS4_GPIO_B_NR (8)
+#define EXYNOS4_GPIO_C0_NR (5)
+#define EXYNOS4_GPIO_C1_NR (5)
+#define EXYNOS4_GPIO_D0_NR (4)
+#define EXYNOS4_GPIO_D1_NR (4)
+#define EXYNOS4_GPIO_E0_NR (5)
+#define EXYNOS4_GPIO_E1_NR (8)
+#define EXYNOS4_GPIO_E2_NR (6)
+#define EXYNOS4_GPIO_E3_NR (8)
+#define EXYNOS4_GPIO_E4_NR (8)
+#define EXYNOS4_GPIO_F0_NR (8)
+#define EXYNOS4_GPIO_F1_NR (8)
+#define EXYNOS4_GPIO_F2_NR (8)
+#define EXYNOS4_GPIO_F3_NR (6)
+#define EXYNOS4_GPIO_J0_NR (8)
+#define EXYNOS4_GPIO_J1_NR (5)
+#define EXYNOS4_GPIO_K0_NR (7)
+#define EXYNOS4_GPIO_K1_NR (7)
+#define EXYNOS4_GPIO_K2_NR (7)
+#define EXYNOS4_GPIO_K3_NR (7)
+#define EXYNOS4_GPIO_L0_NR (8)
+#define EXYNOS4_GPIO_L1_NR (3)
+#define EXYNOS4_GPIO_L2_NR (8)
+#define EXYNOS4_GPIO_X0_NR (8)
+#define EXYNOS4_GPIO_X1_NR (8)
+#define EXYNOS4_GPIO_X2_NR (8)
+#define EXYNOS4_GPIO_X3_NR (8)
+#define EXYNOS4_GPIO_Y0_NR (6)
+#define EXYNOS4_GPIO_Y1_NR (4)
+#define EXYNOS4_GPIO_Y2_NR (6)
+#define EXYNOS4_GPIO_Y3_NR (8)
+#define EXYNOS4_GPIO_Y4_NR (8)
+#define EXYNOS4_GPIO_Y5_NR (8)
+#define EXYNOS4_GPIO_Y6_NR (8)
+#define EXYNOS4_GPIO_Z_NR (7)
+
+/* GPIO bank numbers */
+
+#define EXYNOS4_GPIO_NEXT(__gpio) \
+ ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s5p_gpio_number {
+ EXYNOS4_GPIO_A0_START = 0,
+ EXYNOS4_GPIO_A1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_A0),
+ EXYNOS4_GPIO_B_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_A1),
+ EXYNOS4_GPIO_C0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_B),
+ EXYNOS4_GPIO_C1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_C0),
+ EXYNOS4_GPIO_D0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_C1),
+ EXYNOS4_GPIO_D1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_D0),
+ EXYNOS4_GPIO_E0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_D1),
+ EXYNOS4_GPIO_E1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E0),
+ EXYNOS4_GPIO_E2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E1),
+ EXYNOS4_GPIO_E3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E2),
+ EXYNOS4_GPIO_E4_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E3),
+ EXYNOS4_GPIO_F0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E4),
+ EXYNOS4_GPIO_F1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F0),
+ EXYNOS4_GPIO_F2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F1),
+ EXYNOS4_GPIO_F3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F2),
+ EXYNOS4_GPIO_J0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F3),
+ EXYNOS4_GPIO_J1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_J0),
+ EXYNOS4_GPIO_K0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_J1),
+ EXYNOS4_GPIO_K1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K0),
+ EXYNOS4_GPIO_K2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K1),
+ EXYNOS4_GPIO_K3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K2),
+ EXYNOS4_GPIO_L0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K3),
+ EXYNOS4_GPIO_L1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_L0),
+ EXYNOS4_GPIO_L2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_L1),
+ EXYNOS4_GPIO_X0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_L2),
+ EXYNOS4_GPIO_X1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X0),
+ EXYNOS4_GPIO_X2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X1),
+ EXYNOS4_GPIO_X3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X2),
+ EXYNOS4_GPIO_Y0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X3),
+ EXYNOS4_GPIO_Y1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y0),
+ EXYNOS4_GPIO_Y2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y1),
+ EXYNOS4_GPIO_Y3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y2),
+ EXYNOS4_GPIO_Y4_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y3),
+ EXYNOS4_GPIO_Y5_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y4),
+ EXYNOS4_GPIO_Y6_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y5),
+ EXYNOS4_GPIO_Z_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y6),
+};
+
+/* EXYNOS4 GPIO number definitions */
+#define EXYNOS4_GPA0(_nr) (EXYNOS4_GPIO_A0_START + (_nr))
+#define EXYNOS4_GPA1(_nr) (EXYNOS4_GPIO_A1_START + (_nr))
+#define EXYNOS4_GPB(_nr) (EXYNOS4_GPIO_B_START + (_nr))
+#define EXYNOS4_GPC0(_nr) (EXYNOS4_GPIO_C0_START + (_nr))
+#define EXYNOS4_GPC1(_nr) (EXYNOS4_GPIO_C1_START + (_nr))
+#define EXYNOS4_GPD0(_nr) (EXYNOS4_GPIO_D0_START + (_nr))
+#define EXYNOS4_GPD1(_nr) (EXYNOS4_GPIO_D1_START + (_nr))
+#define EXYNOS4_GPE0(_nr) (EXYNOS4_GPIO_E0_START + (_nr))
+#define EXYNOS4_GPE1(_nr) (EXYNOS4_GPIO_E1_START + (_nr))
+#define EXYNOS4_GPE2(_nr) (EXYNOS4_GPIO_E2_START + (_nr))
+#define EXYNOS4_GPE3(_nr) (EXYNOS4_GPIO_E3_START + (_nr))
+#define EXYNOS4_GPE4(_nr) (EXYNOS4_GPIO_E4_START + (_nr))
+#define EXYNOS4_GPF0(_nr) (EXYNOS4_GPIO_F0_START + (_nr))
+#define EXYNOS4_GPF1(_nr) (EXYNOS4_GPIO_F1_START + (_nr))
+#define EXYNOS4_GPF2(_nr) (EXYNOS4_GPIO_F2_START + (_nr))
+#define EXYNOS4_GPF3(_nr) (EXYNOS4_GPIO_F3_START + (_nr))
+#define EXYNOS4_GPJ0(_nr) (EXYNOS4_GPIO_J0_START + (_nr))
+#define EXYNOS4_GPJ1(_nr) (EXYNOS4_GPIO_J1_START + (_nr))
+#define EXYNOS4_GPK0(_nr) (EXYNOS4_GPIO_K0_START + (_nr))
+#define EXYNOS4_GPK1(_nr) (EXYNOS4_GPIO_K1_START + (_nr))
+#define EXYNOS4_GPK2(_nr) (EXYNOS4_GPIO_K2_START + (_nr))
+#define EXYNOS4_GPK3(_nr) (EXYNOS4_GPIO_K3_START + (_nr))
+#define EXYNOS4_GPL0(_nr) (EXYNOS4_GPIO_L0_START + (_nr))
+#define EXYNOS4_GPL1(_nr) (EXYNOS4_GPIO_L1_START + (_nr))
+#define EXYNOS4_GPL2(_nr) (EXYNOS4_GPIO_L2_START + (_nr))
+#define EXYNOS4_GPX0(_nr) (EXYNOS4_GPIO_X0_START + (_nr))
+#define EXYNOS4_GPX1(_nr) (EXYNOS4_GPIO_X1_START + (_nr))
+#define EXYNOS4_GPX2(_nr) (EXYNOS4_GPIO_X2_START + (_nr))
+#define EXYNOS4_GPX3(_nr) (EXYNOS4_GPIO_X3_START + (_nr))
+#define EXYNOS4_GPY0(_nr) (EXYNOS4_GPIO_Y0_START + (_nr))
+#define EXYNOS4_GPY1(_nr) (EXYNOS4_GPIO_Y1_START + (_nr))
+#define EXYNOS4_GPY2(_nr) (EXYNOS4_GPIO_Y2_START + (_nr))
+#define EXYNOS4_GPY3(_nr) (EXYNOS4_GPIO_Y3_START + (_nr))
+#define EXYNOS4_GPY4(_nr) (EXYNOS4_GPIO_Y4_START + (_nr))
+#define EXYNOS4_GPY5(_nr) (EXYNOS4_GPIO_Y5_START + (_nr))
+#define EXYNOS4_GPY6(_nr) (EXYNOS4_GPIO_Y6_START + (_nr))
+#define EXYNOS4_GPZ(_nr) (EXYNOS4_GPIO_Z_START + (_nr))
+
+/* the end of the EXYNOS4 specific gpios */
+#define EXYNOS4_GPIO_END (EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) + 1)
+#define S3C_GPIO_END EXYNOS4_GPIO_END
+
+/* define the number of gpios we need to the one after the GPZ() range */
+#define ARCH_NR_GPIOS (EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) + \
+ CONFIG_SAMSUNG_GPIO_EXTRA + 1)
+
+#endif /* __ASM_ARCH_GPIO_H */
--- /dev/null
+/* linux/arch/arm/mach-exynos4/include/mach/hardware.h
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4 - Hardware support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_HARDWARE_H */
--- /dev/null
+/* linux/arch/arm/mach-exynos4/include/mach/io.h
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Copyright 2008-2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Based on arch/arm/mach-s5p6442/include/mach/io.h
+ *
+ * Default IO routines for EXYNOS4
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H __FILE__
+
+/* No current ISA/PCI bus support. */
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
+
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+#endif /* __ASM_ARM_ARCH_IO_H */
--- /dev/null
+/* linux/arch/arm/mach-exynos4/include/mach/irqs.h
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4 - IRQ definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#include <plat/irqs.h>
+
+/* PPI: Private Peripheral Interrupt */
+
+#define IRQ_PPI(x) S5P_IRQ(x+16)
+
+#define IRQ_MCT_LOCALTIMER IRQ_PPI(12)
+
+/* SPI: Shared Peripheral Interrupt */
+
+#define IRQ_SPI(x) S5P_IRQ(x+32)
+
+#define IRQ_EINT0 IRQ_SPI(16)
+#define IRQ_EINT1 IRQ_SPI(17)
+#define IRQ_EINT2 IRQ_SPI(18)
+#define IRQ_EINT3 IRQ_SPI(19)
+#define IRQ_EINT4 IRQ_SPI(20)
+#define IRQ_EINT5 IRQ_SPI(21)
+#define IRQ_EINT6 IRQ_SPI(22)
+#define IRQ_EINT7 IRQ_SPI(23)
+#define IRQ_EINT8 IRQ_SPI(24)
+#define IRQ_EINT9 IRQ_SPI(25)
+#define IRQ_EINT10 IRQ_SPI(26)
+#define IRQ_EINT11 IRQ_SPI(27)
+#define IRQ_EINT12 IRQ_SPI(28)
+#define IRQ_EINT13 IRQ_SPI(29)
+#define IRQ_EINT14 IRQ_SPI(30)
+#define IRQ_EINT15 IRQ_SPI(31)
+#define IRQ_EINT16_31 IRQ_SPI(32)
+
+#define IRQ_PDMA0 IRQ_SPI(35)
+#define IRQ_PDMA1 IRQ_SPI(36)
+#define IRQ_TIMER0_VIC IRQ_SPI(37)
+#define IRQ_TIMER1_VIC IRQ_SPI(38)
+#define IRQ_TIMER2_VIC IRQ_SPI(39)
+#define IRQ_TIMER3_VIC IRQ_SPI(40)
+#define IRQ_TIMER4_VIC IRQ_SPI(41)
+#define IRQ_MCT_L0 IRQ_SPI(42)
+#define IRQ_WDT IRQ_SPI(43)
+#define IRQ_RTC_ALARM IRQ_SPI(44)
+#define IRQ_RTC_TIC IRQ_SPI(45)
+#define IRQ_GPIO_XB IRQ_SPI(46)
+#define IRQ_GPIO_XA IRQ_SPI(47)
+#define IRQ_MCT_L1 IRQ_SPI(48)
+
+#define IRQ_UART0 IRQ_SPI(52)
+#define IRQ_UART1 IRQ_SPI(53)
+#define IRQ_UART2 IRQ_SPI(54)
+#define IRQ_UART3 IRQ_SPI(55)
+#define IRQ_UART4 IRQ_SPI(56)
+#define IRQ_MCT_G0 IRQ_SPI(57)
+#define IRQ_IIC IRQ_SPI(58)
+#define IRQ_IIC1 IRQ_SPI(59)
+#define IRQ_IIC2 IRQ_SPI(60)
+#define IRQ_IIC3 IRQ_SPI(61)
+#define IRQ_IIC4 IRQ_SPI(62)
+#define IRQ_IIC5 IRQ_SPI(63)
+#define IRQ_IIC6 IRQ_SPI(64)
+#define IRQ_IIC7 IRQ_SPI(65)
+
+#define IRQ_USB_HOST IRQ_SPI(70)
+#define IRQ_USB_HSOTG IRQ_SPI(71)
+#define IRQ_MODEM_IF IRQ_SPI(72)
+#define IRQ_HSMMC0 IRQ_SPI(73)
+#define IRQ_HSMMC1 IRQ_SPI(74)
+#define IRQ_HSMMC2 IRQ_SPI(75)
+#define IRQ_HSMMC3 IRQ_SPI(76)
+#define IRQ_DWMCI IRQ_SPI(77)
+
+#define IRQ_MIPI_CSIS0 IRQ_SPI(78)
+#define IRQ_MIPI_CSIS1 IRQ_SPI(80)
+
+#define IRQ_ONENAND_AUDI IRQ_SPI(82)
+#define IRQ_ROTATOR IRQ_SPI(83)
+#define IRQ_FIMC0 IRQ_SPI(84)
+#define IRQ_FIMC1 IRQ_SPI(85)
+#define IRQ_FIMC2 IRQ_SPI(86)
+#define IRQ_FIMC3 IRQ_SPI(87)
+#define IRQ_JPEG IRQ_SPI(88)
+#define IRQ_2D IRQ_SPI(89)
+#define IRQ_PCIE IRQ_SPI(90)
+
+#define IRQ_MIXER IRQ_SPI(91)
+#define IRQ_HDMI IRQ_SPI(92)
+#define IRQ_IIC_HDMIPHY IRQ_SPI(93)
+#define IRQ_MFC IRQ_SPI(94)
+#define IRQ_SDO IRQ_SPI(95)
+
+#define IRQ_AUDIO_SS IRQ_SPI(96)
+#define IRQ_I2S0 IRQ_SPI(97)
+#define IRQ_I2S1 IRQ_SPI(98)
+#define IRQ_I2S2 IRQ_SPI(99)
+#define IRQ_AC97 IRQ_SPI(100)
+
+#define IRQ_SPDIF IRQ_SPI(104)
+#define IRQ_ADC0 IRQ_SPI(105)
+#define IRQ_PEN0 IRQ_SPI(106)
+#define IRQ_ADC1 IRQ_SPI(107)
+#define IRQ_PEN1 IRQ_SPI(108)
+#define IRQ_KEYPAD IRQ_SPI(109)
+#define IRQ_PMU IRQ_SPI(110)
+#define IRQ_GPS IRQ_SPI(111)
+#define IRQ_INTFEEDCTRL_SSS IRQ_SPI(112)
+#define IRQ_SLIMBUS IRQ_SPI(113)
+
+#define IRQ_TSI IRQ_SPI(115)
+#define IRQ_SATA IRQ_SPI(116)
+
+#define MAX_IRQ_IN_COMBINER 8
+#define COMBINER_GROUP(x) ((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(128))
+#define COMBINER_IRQ(x, y) (COMBINER_GROUP(x) + y)
+
+#define IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(4, 0)
+#define IRQ_SYSMMU_SSS_0 COMBINER_IRQ(4, 1)
+#define IRQ_SYSMMU_FIMC0_0 COMBINER_IRQ(4, 2)
+#define IRQ_SYSMMU_FIMC1_0 COMBINER_IRQ(4, 3)
+#define IRQ_SYSMMU_FIMC2_0 COMBINER_IRQ(4, 4)
+#define IRQ_SYSMMU_FIMC3_0 COMBINER_IRQ(4, 5)
+#define IRQ_SYSMMU_JPEG_0 COMBINER_IRQ(4, 6)
+#define IRQ_SYSMMU_2D_0 COMBINER_IRQ(4, 7)
+
+#define IRQ_SYSMMU_ROTATOR_0 COMBINER_IRQ(5, 0)
+#define IRQ_SYSMMU_MDMA1_0 COMBINER_IRQ(5, 1)
+#define IRQ_SYSMMU_LCD0_M0_0 COMBINER_IRQ(5, 2)
+#define IRQ_SYSMMU_LCD1_M1_0 COMBINER_IRQ(5, 3)
+#define IRQ_SYSMMU_TV_M0_0 COMBINER_IRQ(5, 4)
+#define IRQ_SYSMMU_MFC_M0_0 COMBINER_IRQ(5, 5)
+#define IRQ_SYSMMU_MFC_M1_0 COMBINER_IRQ(5, 6)
+#define IRQ_SYSMMU_PCIE_0 COMBINER_IRQ(5, 7)
+
+#define IRQ_FIMD0_FIFO COMBINER_IRQ(11, 0)
+#define IRQ_FIMD0_VSYNC COMBINER_IRQ(11, 1)
+#define IRQ_FIMD0_SYSTEM COMBINER_IRQ(11, 2)
+
+#define MAX_COMBINER_NR 16
+
+#define IRQ_ADC IRQ_ADC0
+#define IRQ_TC IRQ_PEN0
+
+#define S5P_IRQ_EINT_BASE COMBINER_IRQ(MAX_COMBINER_NR, 0)
+
+#define S5P_EINT_BASE1 (S5P_IRQ_EINT_BASE + 0)
+#define S5P_EINT_BASE2 (S5P_IRQ_EINT_BASE + 16)
+
+/* optional GPIO interrupts */
+#define S5P_GPIOINT_BASE (S5P_IRQ_EINT_BASE + 32)
+#define IRQ_GPIO1_NR_GROUPS 16
+#define IRQ_GPIO2_NR_GROUPS 9
+#define IRQ_GPIO_END (S5P_GPIOINT_BASE + S5P_GPIOINT_COUNT)
+
+/* Set the default NR_IRQS */
+#define NR_IRQS (IRQ_GPIO_END + 64)
+
+#endif /* __ASM_ARCH_IRQS_H */
--- /dev/null
+/* linux/arch/arm/mach-exynos/include/mach/map.h
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * EXYNOS4 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+
+/*
+ * EXYNOS4 UART offset is 0x10000 but the older S5P SoCs are 0x400.
+ * So need to define it, and here is to avoid redefinition warning.
+ */
+#define S3C_UART_OFFSET (0x10000)
+
+#include <plat/map-s5p.h>
+
+#define EXYNOS4_PA_SYSRAM0 0x02025000
+#define EXYNOS4_PA_SYSRAM1 0x02020000
+
+#define EXYNOS4_PA_FIMC0 0x11800000
+#define EXYNOS4_PA_FIMC1 0x11810000
+#define EXYNOS4_PA_FIMC2 0x11820000
+#define EXYNOS4_PA_FIMC3 0x11830000
+
+#define EXYNOS4_PA_I2S0 0x03830000
+#define EXYNOS4_PA_I2S1 0xE3100000
+#define EXYNOS4_PA_I2S2 0xE2A00000
+
+#define EXYNOS4_PA_PCM0 0x03840000
+#define EXYNOS4_PA_PCM1 0x13980000
+#define EXYNOS4_PA_PCM2 0x13990000
+
+#define EXYNOS4_PA_SROM_BANK(x) (0x04000000 + ((x) * 0x01000000))
+
+#define EXYNOS4_PA_ONENAND 0x0C000000
+#define EXYNOS4_PA_ONENAND_DMA 0x0C600000
+
+#define EXYNOS4_PA_CHIPID 0x10000000
+
+#define EXYNOS4_PA_SYSCON 0x10010000
+#define EXYNOS4_PA_PMU 0x10020000
+#define EXYNOS4_PA_CMU 0x10030000
+
+#define EXYNOS4_PA_SYSTIMER 0x10050000
+#define EXYNOS4_PA_WATCHDOG 0x10060000
+#define EXYNOS4_PA_RTC 0x10070000
+
+#define EXYNOS4_PA_KEYPAD 0x100A0000
+
+#define EXYNOS4_PA_DMC0 0x10400000
+
+#define EXYNOS4_PA_COMBINER 0x10440000
+
+#define EXYNOS4_PA_GIC_CPU 0x10480000
+#define EXYNOS4_PA_GIC_DIST 0x10490000
+
+#define EXYNOS4_PA_COREPERI 0x10500000
+#define EXYNOS4_PA_TWD 0x10500600
+#define EXYNOS4_PA_L2CC 0x10502000
+
+#define EXYNOS4_PA_MDMA 0x10810000
+#define EXYNOS4_PA_PDMA0 0x12680000
+#define EXYNOS4_PA_PDMA1 0x12690000
+
+#define EXYNOS4_PA_SYSMMU_MDMA 0x10A40000
+#define EXYNOS4_PA_SYSMMU_SSS 0x10A50000
+#define EXYNOS4_PA_SYSMMU_FIMC0 0x11A20000
+#define EXYNOS4_PA_SYSMMU_FIMC1 0x11A30000
+#define EXYNOS4_PA_SYSMMU_FIMC2 0x11A40000
+#define EXYNOS4_PA_SYSMMU_FIMC3 0x11A50000
+#define EXYNOS4_PA_SYSMMU_JPEG 0x11A60000
+#define EXYNOS4_PA_SYSMMU_FIMD0 0x11E20000
+#define EXYNOS4_PA_SYSMMU_FIMD1 0x12220000
+#define EXYNOS4_PA_SYSMMU_PCIe 0x12620000
+#define EXYNOS4_PA_SYSMMU_G2D 0x12A20000
+#define EXYNOS4_PA_SYSMMU_ROTATOR 0x12A30000
+#define EXYNOS4_PA_SYSMMU_MDMA2 0x12A40000
+#define EXYNOS4_PA_SYSMMU_TV 0x12E20000
+#define EXYNOS4_PA_SYSMMU_MFC_L 0x13620000
+#define EXYNOS4_PA_SYSMMU_MFC_R 0x13630000
+
+#define EXYNOS4_PA_GPIO1 0x11400000
+#define EXYNOS4_PA_GPIO2 0x11000000
+#define EXYNOS4_PA_GPIO3 0x03860000
+
+#define EXYNOS4_PA_MIPI_CSIS0 0x11880000
+#define EXYNOS4_PA_MIPI_CSIS1 0x11890000
+
+#define EXYNOS4_PA_FIMD0 0x11C00000
+
+#define EXYNOS4_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000))
+#define EXYNOS4_PA_DWMCI 0x12550000
+
+#define EXYNOS4_PA_SATA 0x12560000
+#define EXYNOS4_PA_SATAPHY 0x125D0000
+#define EXYNOS4_PA_SATAPHY_CTRL 0x126B0000
+
+#define EXYNOS4_PA_SROMC 0x12570000
+
+#define EXYNOS4_PA_EHCI 0x12580000
+#define EXYNOS4_PA_HSPHY 0x125B0000
+#define EXYNOS4_PA_MFC 0x13400000
+
+#define EXYNOS4_PA_UART 0x13800000
+
+#define EXYNOS4_PA_VP 0x12C00000
+#define EXYNOS4_PA_MIXER 0x12C10000
+#define EXYNOS4_PA_SDO 0x12C20000
+#define EXYNOS4_PA_HDMI 0x12D00000
+#define EXYNOS4_PA_IIC_HDMIPHY 0x138E0000
+
+#define EXYNOS4_PA_IIC(x) (0x13860000 + ((x) * 0x10000))
+
+#define EXYNOS4_PA_ADC 0x13910000
+#define EXYNOS4_PA_ADC1 0x13911000
+
+#define EXYNOS4_PA_AC97 0x139A0000
+
+#define EXYNOS4_PA_SPDIF 0x139B0000
+
+#define EXYNOS4_PA_TIMER 0x139D0000
+
+#define EXYNOS4_PA_SDRAM 0x40000000
+
+/* Compatibiltiy Defines */
+
+#define S3C_PA_HSMMC0 EXYNOS4_PA_HSMMC(0)
+#define S3C_PA_HSMMC1 EXYNOS4_PA_HSMMC(1)
+#define S3C_PA_HSMMC2 EXYNOS4_PA_HSMMC(2)
+#define S3C_PA_HSMMC3 EXYNOS4_PA_HSMMC(3)
+#define S3C_PA_IIC EXYNOS4_PA_IIC(0)
+#define S3C_PA_IIC1 EXYNOS4_PA_IIC(1)
+#define S3C_PA_IIC2 EXYNOS4_PA_IIC(2)
+#define S3C_PA_IIC3 EXYNOS4_PA_IIC(3)
+#define S3C_PA_IIC4 EXYNOS4_PA_IIC(4)
+#define S3C_PA_IIC5 EXYNOS4_PA_IIC(5)
+#define S3C_PA_IIC6 EXYNOS4_PA_IIC(6)
+#define S3C_PA_IIC7 EXYNOS4_PA_IIC(7)
+#define S3C_PA_RTC EXYNOS4_PA_RTC
+#define S3C_PA_WDT EXYNOS4_PA_WATCHDOG
+#define S3C_PA_UART EXYNOS4_PA_UART
+
+#define S5P_PA_CHIPID EXYNOS4_PA_CHIPID
+#define S5P_PA_EHCI EXYNOS4_PA_EHCI
+#define S5P_PA_FIMC0 EXYNOS4_PA_FIMC0
+#define S5P_PA_FIMC1 EXYNOS4_PA_FIMC1
+#define S5P_PA_FIMC2 EXYNOS4_PA_FIMC2
+#define S5P_PA_FIMC3 EXYNOS4_PA_FIMC3
+#define S5P_PA_FIMD0 EXYNOS4_PA_FIMD0
+#define S5P_PA_HDMI EXYNOS4_PA_HDMI
+#define S5P_PA_IIC_HDMIPHY EXYNOS4_PA_IIC_HDMIPHY
+#define S5P_PA_MFC EXYNOS4_PA_MFC
+#define S5P_PA_MIPI_CSIS0 EXYNOS4_PA_MIPI_CSIS0
+#define S5P_PA_MIPI_CSIS1 EXYNOS4_PA_MIPI_CSIS1
+#define S5P_PA_MIXER EXYNOS4_PA_MIXER
+#define S5P_PA_ONENAND EXYNOS4_PA_ONENAND
+#define S5P_PA_ONENAND_DMA EXYNOS4_PA_ONENAND_DMA
+#define S5P_PA_SDO EXYNOS4_PA_SDO
+#define S5P_PA_SDRAM EXYNOS4_PA_SDRAM
+#define S5P_PA_SROMC EXYNOS4_PA_SROMC
+#define S5P_PA_SYSCON EXYNOS4_PA_SYSCON
+#define S5P_PA_TIMER EXYNOS4_PA_TIMER
+#define S5P_PA_VP EXYNOS4_PA_VP
+
+#define SAMSUNG_PA_ADC EXYNOS4_PA_ADC
+#define SAMSUNG_PA_ADC1 EXYNOS4_PA_ADC1
+#define SAMSUNG_PA_KEYPAD EXYNOS4_PA_KEYPAD
+
+#define EXYNOS_PA_COMBINER EXYNOS4_PA_COMBINER
+#define EXYNOS_PA_GIC_CPU EXYNOS4_PA_GIC_CPU
+#define EXYNOS_PA_GIC_DIST EXYNOS4_PA_GIC_DIST
+#define EXYNOS_PA_PMU EXYNOS4_PA_PMU
+#define EXYNOS_PA_SYSTIMER EXYNOS4_PA_SYSTIMER
+
+/* Compatibility UART */
+
+#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
+
+#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_PA_UART0 S5P_PA_UART(0)
+#define S5P_PA_UART1 S5P_PA_UART(1)
+#define S5P_PA_UART2 S5P_PA_UART(2)
+#define S5P_PA_UART3 S5P_PA_UART(3)
+#define S5P_PA_UART4 S5P_PA_UART(4)
+
+#define S5P_SZ_UART SZ_256
+
+#endif /* __ASM_ARCH_MAP_H */
--- /dev/null
+/* linux/arch/arm/mach-exynos4/include/mach/memory.h
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4 - Memory definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H __FILE__
+
+#define PLAT_PHYS_OFFSET UL(0x40000000)
+
+/* Maximum of 256MiB in one bank */
+#define MAX_PHYSMEM_BITS 32
+#define SECTION_SIZE_BITS 28
+
+#endif /* __ASM_ARCH_MEMORY_H */
--- /dev/null
+/* linux/arch/arm/mach-exynos4/include/mach/pm-core.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/pm-core.h,
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * EXYNOS4210 - PM core support for arch/arm/plat-s5p/pm.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_PM_CORE_H
+#define __ASM_ARCH_PM_CORE_H __FILE__
+
+#include <mach/regs-pmu.h>
+
+static inline void s3c_pm_debug_init_uart(void)
+{
+ /* nothing here yet */
+}
+
+static inline void s3c_pm_arch_prepare_irqs(void)
+{
+ unsigned int tmp;
+ tmp = __raw_readl(S5P_WAKEUP_MASK);
+ tmp &= ~(1 << 31);
+ __raw_writel(tmp, S5P_WAKEUP_MASK);
+
+ __raw_writel(s3c_irqwake_intmask, S5P_WAKEUP_MASK);
+ __raw_writel(s3c_irqwake_eintmask, S5P_EINT_WAKEUP_MASK);
+}
+
+static inline void s3c_pm_arch_stop_clocks(void)
+{
+ /* nothing here yet */
+}
+
+static inline void s3c_pm_arch_show_resume_irqs(void)
+{
+ /* nothing here yet */
+}
+
+static inline void s3c_pm_arch_update_uart(void __iomem *regs,
+ struct pm_uart_save *save)
+{
+ /* nothing here yet */
+}
+
+static inline void s3c_pm_restored_gpios(void)
+{
+ /* nothing here yet */
+}
+
+static inline void samsung_pm_saved_gpios(void)
+{
+ /* nothing here yet */
+}
+
+#endif /* __ASM_ARCH_PM_CORE_H */
--- /dev/null
+/* linux/arch/arm/mach-exynos4/include/mach/pmu.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * EXYNOS4210 - PMU(Power Management Unit) support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_PMU_H
+#define __ASM_ARCH_PMU_H __FILE__
+
+#define PMU_TABLE_END NULL
+
+enum sys_powerdown {
+ SYS_AFTR,
+ SYS_LPA,
+ SYS_SLEEP,
+ NUM_SYS_POWERDOWN,
+};
+
+struct exynos4_pmu_conf {
+ void __iomem *reg;
+ unsigned int val[NUM_SYS_POWERDOWN];
+};
+
+extern void exynos4_sys_powerdown_conf(enum sys_powerdown mode);
+
+#endif /* __ASM_ARCH_PMU_H */
--- /dev/null
+/* arch/arm/mach-exynos4/include/mach/regs-audss.h
+ *
+ * Copyright (c) 2011 Samsung Electronics
+ * http://www.samsung.com
+ *
+ * Exynos4 Audio SubSystem clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_REGS_AUDSS_H
+#define __PLAT_REGS_AUDSS_H __FILE__
+
+#define EXYNOS4_AUDSS_INT_MEM (0x03000000)
+
+#endif /* _PLAT_REGS_AUDSS_H */
--- /dev/null
+/* linux/arch/arm/mach-exynos4/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4 - Clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H __FILE__
+
+#include <plat/cpu.h>
+#include <mach/map.h>
+
+#define S5P_CLKREG(x) (S5P_VA_CMU + (x))
+
+#define S5P_CLKDIV_LEFTBUS S5P_CLKREG(0x04500)
+#define S5P_CLKDIV_STAT_LEFTBUS S5P_CLKREG(0x04600)
+#define S5P_CLKGATE_IP_LEFTBUS S5P_CLKREG(0x04800)
+
+#define S5P_CLKDIV_RIGHTBUS S5P_CLKREG(0x08500)
+#define S5P_CLKDIV_STAT_RIGHTBUS S5P_CLKREG(0x08600)
+#define S5P_CLKGATE_IP_RIGHTBUS S5P_CLKREG(0x08800)
+
+#define S5P_EPLL_LOCK S5P_CLKREG(0x0C010)
+#define S5P_VPLL_LOCK S5P_CLKREG(0x0C020)
+
+#define S5P_EPLL_CON0 S5P_CLKREG(0x0C110)
+#define S5P_EPLL_CON1 S5P_CLKREG(0x0C114)
+#define S5P_VPLL_CON0 S5P_CLKREG(0x0C120)
+#define S5P_VPLL_CON1 S5P_CLKREG(0x0C124)
+
+#define S5P_CLKSRC_TOP0 S5P_CLKREG(0x0C210)
+#define S5P_CLKSRC_TOP1 S5P_CLKREG(0x0C214)
+#define S5P_CLKSRC_CAM S5P_CLKREG(0x0C220)
+#define S5P_CLKSRC_TV S5P_CLKREG(0x0C224)
+#define S5P_CLKSRC_MFC S5P_CLKREG(0x0C228)
+#define S5P_CLKSRC_G3D S5P_CLKREG(0x0C22C)
+#define S5P_CLKSRC_IMAGE S5P_CLKREG(0x0C230)
+#define S5P_CLKSRC_LCD0 S5P_CLKREG(0x0C234)
+#define S5P_CLKSRC_MAUDIO S5P_CLKREG(0x0C23C)
+#define S5P_CLKSRC_FSYS S5P_CLKREG(0x0C240)
+#define S5P_CLKSRC_PERIL0 S5P_CLKREG(0x0C250)
+#define S5P_CLKSRC_PERIL1 S5P_CLKREG(0x0C254)
+
+#define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310)
+#define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320)
+#define S5P_CLKSRC_MASK_TV S5P_CLKREG(0x0C324)
+#define S5P_CLKSRC_MASK_LCD0 S5P_CLKREG(0x0C334)
+#define S5P_CLKSRC_MASK_MAUDIO S5P_CLKREG(0x0C33C)
+#define S5P_CLKSRC_MASK_FSYS S5P_CLKREG(0x0C340)
+#define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350)
+#define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354)
+
+#define S5P_CLKDIV_TOP S5P_CLKREG(0x0C510)
+#define S5P_CLKDIV_CAM S5P_CLKREG(0x0C520)
+#define S5P_CLKDIV_TV S5P_CLKREG(0x0C524)
+#define S5P_CLKDIV_MFC S5P_CLKREG(0x0C528)
+#define S5P_CLKDIV_G3D S5P_CLKREG(0x0C52C)
+#define S5P_CLKDIV_IMAGE S5P_CLKREG(0x0C530)
+#define S5P_CLKDIV_LCD0 S5P_CLKREG(0x0C534)
+#define S5P_CLKDIV_MAUDIO S5P_CLKREG(0x0C53C)
+#define S5P_CLKDIV_FSYS0 S5P_CLKREG(0x0C540)
+#define S5P_CLKDIV_FSYS1 S5P_CLKREG(0x0C544)
+#define S5P_CLKDIV_FSYS2 S5P_CLKREG(0x0C548)
+#define S5P_CLKDIV_FSYS3 S5P_CLKREG(0x0C54C)
+#define S5P_CLKDIV_PERIL0 S5P_CLKREG(0x0C550)
+#define S5P_CLKDIV_PERIL1 S5P_CLKREG(0x0C554)
+#define S5P_CLKDIV_PERIL2 S5P_CLKREG(0x0C558)
+#define S5P_CLKDIV_PERIL3 S5P_CLKREG(0x0C55C)
+#define S5P_CLKDIV_PERIL4 S5P_CLKREG(0x0C560)
+#define S5P_CLKDIV_PERIL5 S5P_CLKREG(0x0C564)
+#define S5P_CLKDIV2_RATIO S5P_CLKREG(0x0C580)
+
+#define S5P_CLKDIV_STAT_TOP S5P_CLKREG(0x0C610)
+
+#define S5P_CLKGATE_SCLKCAM S5P_CLKREG(0x0C820)
+#define S5P_CLKGATE_IP_CAM S5P_CLKREG(0x0C920)
+#define S5P_CLKGATE_IP_TV S5P_CLKREG(0x0C924)
+#define S5P_CLKGATE_IP_MFC S5P_CLKREG(0x0C928)
+#define S5P_CLKGATE_IP_G3D S5P_CLKREG(0x0C92C)
+#define S5P_CLKGATE_IP_IMAGE (soc_is_exynos4210() ? \
+ S5P_CLKREG(0x0C930) : \
+ S5P_CLKREG(0x04930))
+#define S5P_CLKGATE_IP_IMAGE_4210 S5P_CLKREG(0x0C930)
+#define S5P_CLKGATE_IP_IMAGE_4212 S5P_CLKREG(0x04930)
+#define S5P_CLKGATE_IP_LCD0 S5P_CLKREG(0x0C934)
+#define S5P_CLKGATE_IP_FSYS S5P_CLKREG(0x0C940)
+#define S5P_CLKGATE_IP_GPS S5P_CLKREG(0x0C94C)
+#define S5P_CLKGATE_IP_PERIL S5P_CLKREG(0x0C950)
+#define S5P_CLKGATE_IP_PERIR (soc_is_exynos4210() ? \
+ S5P_CLKREG(0x0C960) : \
+ S5P_CLKREG(0x08960))
+#define S5P_CLKGATE_IP_PERIR_4210 S5P_CLKREG(0x0C960)
+#define S5P_CLKGATE_IP_PERIR_4212 S5P_CLKREG(0x08960)
+#define S5P_CLKGATE_BLOCK S5P_CLKREG(0x0C970)
+
+#define S5P_CLKSRC_MASK_DMC S5P_CLKREG(0x10300)
+#define S5P_CLKSRC_DMC S5P_CLKREG(0x10200)
+#define S5P_CLKDIV_DMC0 S5P_CLKREG(0x10500)
+#define S5P_CLKDIV_DMC1 S5P_CLKREG(0x10504)
+#define S5P_CLKDIV_STAT_DMC0 S5P_CLKREG(0x10600)
+#define S5P_CLKGATE_IP_DMC S5P_CLKREG(0x10900)
+
+#define S5P_APLL_LOCK S5P_CLKREG(0x14000)
+#define S5P_MPLL_LOCK (soc_is_exynos4210() ? \
+ S5P_CLKREG(0x14004) : \
+ S5P_CLKREG(0x10008))
+#define S5P_APLL_CON0 S5P_CLKREG(0x14100)
+#define S5P_APLL_CON1 S5P_CLKREG(0x14104)
+#define S5P_MPLL_CON0 (soc_is_exynos4210() ? \
+ S5P_CLKREG(0x14108) : \
+ S5P_CLKREG(0x10108))
+#define S5P_MPLL_CON1 (soc_is_exynos4210() ? \
+ S5P_CLKREG(0x1410C) : \
+ S5P_CLKREG(0x1010C))
+
+#define S5P_CLKSRC_CPU S5P_CLKREG(0x14200)
+#define S5P_CLKMUX_STATCPU S5P_CLKREG(0x14400)
+
+#define S5P_CLKDIV_CPU S5P_CLKREG(0x14500)
+#define S5P_CLKDIV_CPU1 S5P_CLKREG(0x14504)
+#define S5P_CLKDIV_STATCPU S5P_CLKREG(0x14600)
+#define S5P_CLKDIV_STATCPU1 S5P_CLKREG(0x14604)
+
+#define S5P_CLKGATE_SCLKCPU S5P_CLKREG(0x14800)
+#define S5P_CLKGATE_IP_CPU S5P_CLKREG(0x14900)
+
+#define S5P_APLL_LOCKTIME (0x1C20) /* 300us */
+
+#define S5P_APLLCON0_ENABLE_SHIFT (31)
+#define S5P_APLLCON0_LOCKED_SHIFT (29)
+#define S5P_APLL_VAL_1000 ((250 << 16) | (6 << 8) | 1)
+#define S5P_APLL_VAL_800 ((200 << 16) | (6 << 8) | 1)
+
+#define S5P_EPLLCON0_ENABLE_SHIFT (31)
+#define S5P_EPLLCON0_LOCKED_SHIFT (29)
+
+#define S5P_VPLLCON0_ENABLE_SHIFT (31)
+#define S5P_VPLLCON0_LOCKED_SHIFT (29)
+
+#define S5P_CLKSRC_CPU_MUXCORE_SHIFT (16)
+#define S5P_CLKMUX_STATCPU_MUXCORE_MASK (0x7 << S5P_CLKSRC_CPU_MUXCORE_SHIFT)
+
+#define S5P_CLKDIV_CPU0_CORE_SHIFT (0)
+#define S5P_CLKDIV_CPU0_CORE_MASK (0x7 << S5P_CLKDIV_CPU0_CORE_SHIFT)
+#define S5P_CLKDIV_CPU0_COREM0_SHIFT (4)
+#define S5P_CLKDIV_CPU0_COREM0_MASK (0x7 << S5P_CLKDIV_CPU0_COREM0_SHIFT)
+#define S5P_CLKDIV_CPU0_COREM1_SHIFT (8)
+#define S5P_CLKDIV_CPU0_COREM1_MASK (0x7 << S5P_CLKDIV_CPU0_COREM1_SHIFT)
+#define S5P_CLKDIV_CPU0_PERIPH_SHIFT (12)
+#define S5P_CLKDIV_CPU0_PERIPH_MASK (0x7 << S5P_CLKDIV_CPU0_PERIPH_SHIFT)
+#define S5P_CLKDIV_CPU0_ATB_SHIFT (16)
+#define S5P_CLKDIV_CPU0_ATB_MASK (0x7 << S5P_CLKDIV_CPU0_ATB_SHIFT)
+#define S5P_CLKDIV_CPU0_PCLKDBG_SHIFT (20)
+#define S5P_CLKDIV_CPU0_PCLKDBG_MASK (0x7 << S5P_CLKDIV_CPU0_PCLKDBG_SHIFT)
+#define S5P_CLKDIV_CPU0_APLL_SHIFT (24)
+#define S5P_CLKDIV_CPU0_APLL_MASK (0x7 << S5P_CLKDIV_CPU0_APLL_SHIFT)
+
+#define S5P_CLKDIV_DMC0_ACP_SHIFT (0)
+#define S5P_CLKDIV_DMC0_ACP_MASK (0x7 << S5P_CLKDIV_DMC0_ACP_SHIFT)
+#define S5P_CLKDIV_DMC0_ACPPCLK_SHIFT (4)
+#define S5P_CLKDIV_DMC0_ACPPCLK_MASK (0x7 << S5P_CLKDIV_DMC0_ACPPCLK_SHIFT)
+#define S5P_CLKDIV_DMC0_DPHY_SHIFT (8)
+#define S5P_CLKDIV_DMC0_DPHY_MASK (0x7 << S5P_CLKDIV_DMC0_DPHY_SHIFT)
+#define S5P_CLKDIV_DMC0_DMC_SHIFT (12)
+#define S5P_CLKDIV_DMC0_DMC_MASK (0x7 << S5P_CLKDIV_DMC0_DMC_SHIFT)
+#define S5P_CLKDIV_DMC0_DMCD_SHIFT (16)
+#define S5P_CLKDIV_DMC0_DMCD_MASK (0x7 << S5P_CLKDIV_DMC0_DMCD_SHIFT)
+#define S5P_CLKDIV_DMC0_DMCP_SHIFT (20)
+#define S5P_CLKDIV_DMC0_DMCP_MASK (0x7 << S5P_CLKDIV_DMC0_DMCP_SHIFT)
+#define S5P_CLKDIV_DMC0_COPY2_SHIFT (24)
+#define S5P_CLKDIV_DMC0_COPY2_MASK (0x7 << S5P_CLKDIV_DMC0_COPY2_SHIFT)
+#define S5P_CLKDIV_DMC0_CORETI_SHIFT (28)
+#define S5P_CLKDIV_DMC0_CORETI_MASK (0x7 << S5P_CLKDIV_DMC0_CORETI_SHIFT)
+
+#define S5P_CLKDIV_TOP_ACLK200_SHIFT (0)
+#define S5P_CLKDIV_TOP_ACLK200_MASK (0x7 << S5P_CLKDIV_TOP_ACLK200_SHIFT)
+#define S5P_CLKDIV_TOP_ACLK100_SHIFT (4)
+#define S5P_CLKDIV_TOP_ACLK100_MASK (0xf << S5P_CLKDIV_TOP_ACLK100_SHIFT)
+#define S5P_CLKDIV_TOP_ACLK160_SHIFT (8)
+#define S5P_CLKDIV_TOP_ACLK160_MASK (0x7 << S5P_CLKDIV_TOP_ACLK160_SHIFT)
+#define S5P_CLKDIV_TOP_ACLK133_SHIFT (12)
+#define S5P_CLKDIV_TOP_ACLK133_MASK (0x7 << S5P_CLKDIV_TOP_ACLK133_SHIFT)
+#define S5P_CLKDIV_TOP_ONENAND_SHIFT (16)
+#define S5P_CLKDIV_TOP_ONENAND_MASK (0x7 << S5P_CLKDIV_TOP_ONENAND_SHIFT)
+
+#define S5P_CLKDIV_BUS_GDLR_SHIFT (0)
+#define S5P_CLKDIV_BUS_GDLR_MASK (0x7 << S5P_CLKDIV_BUS_GDLR_SHIFT)
+#define S5P_CLKDIV_BUS_GPLR_SHIFT (4)
+#define S5P_CLKDIV_BUS_GPLR_MASK (0x7 << S5P_CLKDIV_BUS_GPLR_SHIFT)
+
+/* Only for EXYNOS4210 */
+
+#define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238)
+#define S5P_CLKSRC_MASK_LCD1 S5P_CLKREG(0x0C338)
+#define S5P_CLKDIV_LCD1 S5P_CLKREG(0x0C538)
+#define S5P_CLKGATE_IP_LCD1 S5P_CLKREG(0x0C938)
+
+/* Compatibility defines and inclusion */
+
+#include <mach/regs-pmu.h>
+
+#define S5P_EPLL_CON S5P_EPLL_CON0
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
--- /dev/null
+/* linux/arch/arm/mach-exynos4/include/mach/regs-gpio.h
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4 - GPIO (including EINT) register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_GPIO_H
+#define __ASM_ARCH_REGS_GPIO_H __FILE__
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#define EXYNOS4_EINT40CON (S5P_VA_GPIO2 + 0xE00)
+#define S5P_EINT_CON(x) (EXYNOS4_EINT40CON + ((x) * 0x4))
+
+#define EXYNOS4_EINT40FLTCON0 (S5P_VA_GPIO2 + 0xE80)
+#define S5P_EINT_FLTCON(x) (EXYNOS4_EINT40FLTCON0 + ((x) * 0x4))
+
+#define EXYNOS4_EINT40MASK (S5P_VA_GPIO2 + 0xF00)
+#define S5P_EINT_MASK(x) (EXYNOS4_EINT40MASK + ((x) * 0x4))
+
+#define EXYNOS4_EINT40PEND (S5P_VA_GPIO2 + 0xF40)
+#define S5P_EINT_PEND(x) (EXYNOS4_EINT40PEND + ((x) * 0x4))
+
+#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3)
+
+#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7))
+
+#define EINT_MODE S3C_GPIO_SFN(0xf)
+
+#define EINT_GPIO_0(x) EXYNOS4_GPX0(x)
+#define EINT_GPIO_1(x) EXYNOS4_GPX1(x)
+#define EINT_GPIO_2(x) EXYNOS4_GPX2(x)
+#define EINT_GPIO_3(x) EXYNOS4_GPX3(x)
+
+#endif /* __ASM_ARCH_REGS_GPIO_H */
--- /dev/null
+/* linux/arch/arm/mach-exynos4/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4 - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <asm/hardware/gic.h>
+#include <mach/map.h>
+
+#endif /* __ASM_ARCH_REGS_IRQ_H */
--- /dev/null
+/* arch/arm/mach-exynos4/include/mach/regs-mct.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4 MCT configutation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_MCT_H
+#define __ASM_ARCH_REGS_MCT_H __FILE__
+
+#include <mach/map.h>
+
+#define EXYNOS4_MCTREG(x) (S5P_VA_SYSTIMER + (x))
+
+#define EXYNOS4_MCT_G_CNT_L EXYNOS4_MCTREG(0x100)
+#define EXYNOS4_MCT_G_CNT_U EXYNOS4_MCTREG(0x104)
+#define EXYNOS4_MCT_G_CNT_WSTAT EXYNOS4_MCTREG(0x110)
+
+#define EXYNOS4_MCT_G_COMP0_L EXYNOS4_MCTREG(0x200)
+#define EXYNOS4_MCT_G_COMP0_U EXYNOS4_MCTREG(0x204)
+#define EXYNOS4_MCT_G_COMP0_ADD_INCR EXYNOS4_MCTREG(0x208)
+
+#define EXYNOS4_MCT_G_TCON EXYNOS4_MCTREG(0x240)
+
+#define EXYNOS4_MCT_G_INT_CSTAT EXYNOS4_MCTREG(0x244)
+#define EXYNOS4_MCT_G_INT_ENB EXYNOS4_MCTREG(0x248)
+#define EXYNOS4_MCT_G_WSTAT EXYNOS4_MCTREG(0x24C)
+
+#define _EXYNOS4_MCT_L_BASE EXYNOS4_MCTREG(0x300)
+#define EXYNOS4_MCT_L_BASE(x) (_EXYNOS4_MCT_L_BASE + (0x100 * x))
+#define EXYNOS4_MCT_L_MASK (0xffffff00)
+
+#define MCT_L_TCNTB_OFFSET (0x00)
+#define MCT_L_ICNTB_OFFSET (0x08)
+#define MCT_L_TCON_OFFSET (0x20)
+#define MCT_L_INT_CSTAT_OFFSET (0x30)
+#define MCT_L_INT_ENB_OFFSET (0x34)
+#define MCT_L_WSTAT_OFFSET (0x40)
+
+#define MCT_G_TCON_START (1 << 8)
+#define MCT_G_TCON_COMP0_AUTO_INC (1 << 1)
+#define MCT_G_TCON_COMP0_ENABLE (1 << 0)
+
+#define MCT_L_TCON_INTERVAL_MODE (1 << 2)
+#define MCT_L_TCON_INT_START (1 << 1)
+#define MCT_L_TCON_TIMER_START (1 << 0)
+
+#endif /* __ASM_ARCH_REGS_MCT_H */
--- /dev/null
+/* linux/arch/arm/mach-exynos4/include/mach/regs-mem.h
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4 - SROMC and DMC register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_MEM_H
+#define __ASM_ARCH_REGS_MEM_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_DMC0_MEMCON_OFFSET 0x04
+
+#define S5P_DMC0_MEMTYPE_SHIFT 8
+#define S5P_DMC0_MEMTYPE_MASK 0xF
+
+#endif /* __ASM_ARCH_REGS_MEM_H */
--- /dev/null
+/* linux/arch/arm/mach-exynos4/include/mach/regs-pmu.h
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4 - Power management unit definition
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_PMU_H
+#define __ASM_ARCH_REGS_PMU_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_PMUREG(x) (S5P_VA_PMU + (x))
+
+#define S5P_CENTRAL_SEQ_CONFIGURATION S5P_PMUREG(0x0200)
+
+#define S5P_CENTRAL_LOWPWR_CFG (1 << 16)
+
+#define S5P_CENTRAL_SEQ_OPTION S5P_PMUREG(0x0208)
+
+#define S5P_USE_STANDBY_WFI0 (1 << 16)
+#define S5P_USE_STANDBY_WFI1 (1 << 17)
+#define S5P_USE_STANDBYWFI_ISP_ARM (1 << 18)
+#define S5P_USE_STANDBY_WFE0 (1 << 24)
+#define S5P_USE_STANDBY_WFE1 (1 << 25)
+#define S5P_USE_STANDBYWFE_ISP_ARM (1 << 26)
+
+#define S5P_SWRESET S5P_PMUREG(0x0400)
+
+#define S5P_WAKEUP_STAT S5P_PMUREG(0x0600)
+#define S5P_EINT_WAKEUP_MASK S5P_PMUREG(0x0604)
+#define S5P_WAKEUP_MASK S5P_PMUREG(0x0608)
+
+#define S5P_HDMI_PHY_CONTROL S5P_PMUREG(0x0700)
+#define S5P_HDMI_PHY_ENABLE (1 << 0)
+
+#define S5P_DAC_PHY_CONTROL S5P_PMUREG(0x070C)
+#define S5P_DAC_PHY_ENABLE (1 << 0)
+
+#define S5P_MIPI_DPHY_CONTROL(n) S5P_PMUREG(0x0710 + (n) * 4)
+#define S5P_MIPI_DPHY_ENABLE (1 << 0)
+#define S5P_MIPI_DPHY_SRESETN (1 << 1)
+#define S5P_MIPI_DPHY_MRESETN (1 << 2)
+
+#define S5P_INFORM0 S5P_PMUREG(0x0800)
+#define S5P_INFORM1 S5P_PMUREG(0x0804)
+#define S5P_INFORM2 S5P_PMUREG(0x0808)
+#define S5P_INFORM3 S5P_PMUREG(0x080C)
+#define S5P_INFORM4 S5P_PMUREG(0x0810)
+#define S5P_INFORM5 S5P_PMUREG(0x0814)
+#define S5P_INFORM6 S5P_PMUREG(0x0818)
+#define S5P_INFORM7 S5P_PMUREG(0x081C)
+
+#define S5P_ARM_CORE0_LOWPWR S5P_PMUREG(0x1000)
+#define S5P_DIS_IRQ_CORE0 S5P_PMUREG(0x1004)
+#define S5P_DIS_IRQ_CENTRAL0 S5P_PMUREG(0x1008)
+#define S5P_ARM_CORE1_LOWPWR S5P_PMUREG(0x1010)
+#define S5P_DIS_IRQ_CORE1 S5P_PMUREG(0x1014)
+#define S5P_DIS_IRQ_CENTRAL1 S5P_PMUREG(0x1018)
+#define S5P_ARM_COMMON_LOWPWR S5P_PMUREG(0x1080)
+#define S5P_L2_0_LOWPWR S5P_PMUREG(0x10C0)
+#define S5P_L2_1_LOWPWR S5P_PMUREG(0x10C4)
+#define S5P_CMU_ACLKSTOP_LOWPWR S5P_PMUREG(0x1100)
+#define S5P_CMU_SCLKSTOP_LOWPWR S5P_PMUREG(0x1104)
+#define S5P_CMU_RESET_LOWPWR S5P_PMUREG(0x110C)
+#define S5P_APLL_SYSCLK_LOWPWR S5P_PMUREG(0x1120)
+#define S5P_MPLL_SYSCLK_LOWPWR S5P_PMUREG(0x1124)
+#define S5P_VPLL_SYSCLK_LOWPWR S5P_PMUREG(0x1128)
+#define S5P_EPLL_SYSCLK_LOWPWR S5P_PMUREG(0x112C)
+#define S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR S5P_PMUREG(0x1138)
+#define S5P_CMU_RESET_GPSALIVE_LOWPWR S5P_PMUREG(0x113C)
+#define S5P_CMU_CLKSTOP_CAM_LOWPWR S5P_PMUREG(0x1140)
+#define S5P_CMU_CLKSTOP_TV_LOWPWR S5P_PMUREG(0x1144)
+#define S5P_CMU_CLKSTOP_MFC_LOWPWR S5P_PMUREG(0x1148)
+#define S5P_CMU_CLKSTOP_G3D_LOWPWR S5P_PMUREG(0x114C)
+#define S5P_CMU_CLKSTOP_LCD0_LOWPWR S5P_PMUREG(0x1150)
+#define S5P_CMU_CLKSTOP_MAUDIO_LOWPWR S5P_PMUREG(0x1158)
+#define S5P_CMU_CLKSTOP_GPS_LOWPWR S5P_PMUREG(0x115C)
+#define S5P_CMU_RESET_CAM_LOWPWR S5P_PMUREG(0x1160)
+#define S5P_CMU_RESET_TV_LOWPWR S5P_PMUREG(0x1164)
+#define S5P_CMU_RESET_MFC_LOWPWR S5P_PMUREG(0x1168)
+#define S5P_CMU_RESET_G3D_LOWPWR S5P_PMUREG(0x116C)
+#define S5P_CMU_RESET_LCD0_LOWPWR S5P_PMUREG(0x1170)
+#define S5P_CMU_RESET_MAUDIO_LOWPWR S5P_PMUREG(0x1178)
+#define S5P_CMU_RESET_GPS_LOWPWR S5P_PMUREG(0x117C)
+#define S5P_TOP_BUS_LOWPWR S5P_PMUREG(0x1180)
+#define S5P_TOP_RETENTION_LOWPWR S5P_PMUREG(0x1184)
+#define S5P_TOP_PWR_LOWPWR S5P_PMUREG(0x1188)
+#define S5P_LOGIC_RESET_LOWPWR S5P_PMUREG(0x11A0)
+#define S5P_ONENAND_MEM_LOWPWR S5P_PMUREG(0x11C0)
+#define S5P_G2D_ACP_MEM_LOWPWR S5P_PMUREG(0x11C8)
+#define S5P_USBOTG_MEM_LOWPWR S5P_PMUREG(0x11CC)
+#define S5P_HSMMC_MEM_LOWPWR S5P_PMUREG(0x11D0)
+#define S5P_CSSYS_MEM_LOWPWR S5P_PMUREG(0x11D4)
+#define S5P_SECSS_MEM_LOWPWR S5P_PMUREG(0x11D8)
+#define S5P_PAD_RETENTION_DRAM_LOWPWR S5P_PMUREG(0x1200)
+#define S5P_PAD_RETENTION_MAUDIO_LOWPWR S5P_PMUREG(0x1204)
+#define S5P_PAD_RETENTION_GPIO_LOWPWR S5P_PMUREG(0x1220)
+#define S5P_PAD_RETENTION_UART_LOWPWR S5P_PMUREG(0x1224)
+#define S5P_PAD_RETENTION_MMCA_LOWPWR S5P_PMUREG(0x1228)
+#define S5P_PAD_RETENTION_MMCB_LOWPWR S5P_PMUREG(0x122C)
+#define S5P_PAD_RETENTION_EBIA_LOWPWR S5P_PMUREG(0x1230)
+#define S5P_PAD_RETENTION_EBIB_LOWPWR S5P_PMUREG(0x1234)
+#define S5P_PAD_RETENTION_ISOLATION_LOWPWR S5P_PMUREG(0x1240)
+#define S5P_PAD_RETENTION_ALV_SEL_LOWPWR S5P_PMUREG(0x1260)
+#define S5P_XUSBXTI_LOWPWR S5P_PMUREG(0x1280)
+#define S5P_XXTI_LOWPWR S5P_PMUREG(0x1284)
+#define S5P_EXT_REGULATOR_LOWPWR S5P_PMUREG(0x12C0)
+#define S5P_GPIO_MODE_LOWPWR S5P_PMUREG(0x1300)
+#define S5P_GPIO_MODE_MAUDIO_LOWPWR S5P_PMUREG(0x1340)
+#define S5P_CAM_LOWPWR S5P_PMUREG(0x1380)
+#define S5P_TV_LOWPWR S5P_PMUREG(0x1384)
+#define S5P_MFC_LOWPWR S5P_PMUREG(0x1388)
+#define S5P_G3D_LOWPWR S5P_PMUREG(0x138C)
+#define S5P_LCD0_LOWPWR S5P_PMUREG(0x1390)
+#define S5P_MAUDIO_LOWPWR S5P_PMUREG(0x1398)
+#define S5P_GPS_LOWPWR S5P_PMUREG(0x139C)
+#define S5P_GPS_ALIVE_LOWPWR S5P_PMUREG(0x13A0)
+
+#define S5P_ARM_CORE0_CONFIGURATION S5P_PMUREG(0x2000)
+#define S5P_ARM_CORE0_OPTION S5P_PMUREG(0x2008)
+#define S5P_ARM_CORE1_CONFIGURATION S5P_PMUREG(0x2080)
+#define S5P_ARM_CORE1_STATUS S5P_PMUREG(0x2084)
+#define S5P_ARM_CORE1_OPTION S5P_PMUREG(0x2088)
+
+#define S5P_ARM_COMMON_OPTION S5P_PMUREG(0x2408)
+#define S5P_TOP_PWR_OPTION S5P_PMUREG(0x2C48)
+#define S5P_CAM_OPTION S5P_PMUREG(0x3C08)
+#define S5P_TV_OPTION S5P_PMUREG(0x3C28)
+#define S5P_MFC_OPTION S5P_PMUREG(0x3C48)
+#define S5P_G3D_OPTION S5P_PMUREG(0x3C68)
+#define S5P_LCD0_OPTION S5P_PMUREG(0x3C88)
+#define S5P_LCD1_OPTION S5P_PMUREG(0x3CA8)
+#define S5P_MAUDIO_OPTION S5P_PMUREG(0x3CC8)
+#define S5P_GPS_OPTION S5P_PMUREG(0x3CE8)
+#define S5P_GPS_ALIVE_OPTION S5P_PMUREG(0x3D08)
+
+#define S5P_PAD_RET_MAUDIO_OPTION S5P_PMUREG(0x3028)
+#define S5P_PAD_RET_GPIO_OPTION S5P_PMUREG(0x3108)
+#define S5P_PAD_RET_UART_OPTION S5P_PMUREG(0x3128)
+#define S5P_PAD_RET_MMCA_OPTION S5P_PMUREG(0x3148)
+#define S5P_PAD_RET_MMCB_OPTION S5P_PMUREG(0x3168)
+#define S5P_PAD_RET_EBIA_OPTION S5P_PMUREG(0x3188)
+#define S5P_PAD_RET_EBIB_OPTION S5P_PMUREG(0x31A8)
+
+#define S5P_PMU_CAM_CONF S5P_PMUREG(0x3C00)
+#define S5P_PMU_TV_CONF S5P_PMUREG(0x3C20)
+#define S5P_PMU_MFC_CONF S5P_PMUREG(0x3C40)
+#define S5P_PMU_G3D_CONF S5P_PMUREG(0x3C60)
+#define S5P_PMU_LCD0_CONF S5P_PMUREG(0x3C80)
+#define S5P_PMU_GPS_CONF S5P_PMUREG(0x3CE0)
+
+#define S5P_PMU_SATA_PHY_CONTROL_EN 0x1
+#define S5P_CORE_LOCAL_PWR_EN 0x3
+#define S5P_INT_LOCAL_PWR_EN 0x7
+
+#define S5P_CHECK_SLEEP 0x00000BAD
+
+/* Only for EXYNOS4210 */
+#define S5P_USBHOST_PHY_CONTROL S5P_PMUREG(0x0708)
+#define S5P_USBHOST_PHY_ENABLE (1 << 0)
+
+#define S5P_PMU_SATA_PHY_CONTROL S5P_PMUREG(0x0720)
+
+#define S5P_CMU_CLKSTOP_LCD1_LOWPWR S5P_PMUREG(0x1154)
+#define S5P_CMU_RESET_LCD1_LOWPWR S5P_PMUREG(0x1174)
+#define S5P_MODIMIF_MEM_LOWPWR S5P_PMUREG(0x11C4)
+#define S5P_PCIE_MEM_LOWPWR S5P_PMUREG(0x11E0)
+#define S5P_SATA_MEM_LOWPWR S5P_PMUREG(0x11E4)
+#define S5P_LCD1_LOWPWR S5P_PMUREG(0x1394)
+
+#define S5P_PMU_LCD1_CONF S5P_PMUREG(0x3CA0)
+
+/* Only for EXYNOS4212 */
+#define S5P_ISP_ARM_LOWPWR S5P_PMUREG(0x1050)
+#define S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR S5P_PMUREG(0x1054)
+#define S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR S5P_PMUREG(0x1058)
+#define S5P_CMU_ACLKSTOP_COREBLK_LOWPWR S5P_PMUREG(0x1110)
+#define S5P_CMU_SCLKSTOP_COREBLK_LOWPWR S5P_PMUREG(0x1114)
+#define S5P_CMU_RESET_COREBLK_LOWPWR S5P_PMUREG(0x111C)
+#define S5P_MPLLUSER_SYSCLK_LOWPWR S5P_PMUREG(0x1130)
+#define S5P_CMU_CLKSTOP_ISP_LOWPWR S5P_PMUREG(0x1154)
+#define S5P_CMU_RESET_ISP_LOWPWR S5P_PMUREG(0x1174)
+#define S5P_TOP_BUS_COREBLK_LOWPWR S5P_PMUREG(0x1190)
+#define S5P_TOP_RETENTION_COREBLK_LOWPWR S5P_PMUREG(0x1194)
+#define S5P_TOP_PWR_COREBLK_LOWPWR S5P_PMUREG(0x1198)
+#define S5P_OSCCLK_GATE_LOWPWR S5P_PMUREG(0x11A4)
+#define S5P_LOGIC_RESET_COREBLK_LOWPWR S5P_PMUREG(0x11B0)
+#define S5P_OSCCLK_GATE_COREBLK_LOWPWR S5P_PMUREG(0x11B4)
+#define S5P_HSI_MEM_LOWPWR S5P_PMUREG(0x11C4)
+#define S5P_ROTATOR_MEM_LOWPWR S5P_PMUREG(0x11DC)
+#define S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR S5P_PMUREG(0x123C)
+#define S5P_PAD_ISOLATION_COREBLK_LOWPWR S5P_PMUREG(0x1250)
+#define S5P_GPIO_MODE_COREBLK_LOWPWR S5P_PMUREG(0x1320)
+#define S5P_TOP_ASB_RESET_LOWPWR S5P_PMUREG(0x1344)
+#define S5P_TOP_ASB_ISOLATION_LOWPWR S5P_PMUREG(0x1348)
+#define S5P_ISP_LOWPWR S5P_PMUREG(0x1394)
+#define S5P_DRAM_FREQ_DOWN_LOWPWR S5P_PMUREG(0x13B0)
+#define S5P_DDRPHY_DLLOFF_LOWPWR S5P_PMUREG(0x13B4)
+#define S5P_CMU_SYSCLK_ISP_LOWPWR S5P_PMUREG(0x13B8)
+#define S5P_CMU_SYSCLK_GPS_LOWPWR S5P_PMUREG(0x13BC)
+#define S5P_LPDDR_PHY_DLL_LOCK_LOWPWR S5P_PMUREG(0x13C0)
+
+#define S5P_ARM_L2_0_OPTION S5P_PMUREG(0x2608)
+#define S5P_ARM_L2_1_OPTION S5P_PMUREG(0x2628)
+#define S5P_ONENAND_MEM_OPTION S5P_PMUREG(0x2E08)
+#define S5P_HSI_MEM_OPTION S5P_PMUREG(0x2E28)
+#define S5P_G2D_ACP_MEM_OPTION S5P_PMUREG(0x2E48)
+#define S5P_USBOTG_MEM_OPTION S5P_PMUREG(0x2E68)
+#define S5P_HSMMC_MEM_OPTION S5P_PMUREG(0x2E88)
+#define S5P_CSSYS_MEM_OPTION S5P_PMUREG(0x2EA8)
+#define S5P_SECSS_MEM_OPTION S5P_PMUREG(0x2EC8)
+#define S5P_ROTATOR_MEM_OPTION S5P_PMUREG(0x2F48)
+
+#endif /* __ASM_ARCH_REGS_PMU_H */
--- /dev/null
+/* linux/arch/arm/mach-exynos4/include/mach/regs-sysmmu.h
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4 - System MMU register
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_SYSMMU_H
+#define __ASM_ARCH_REGS_SYSMMU_H __FILE__
+
+#define S5P_MMU_CTRL 0x000
+#define S5P_MMU_CFG 0x004
+#define S5P_MMU_STATUS 0x008
+#define S5P_MMU_FLUSH 0x00C
+#define S5P_PT_BASE_ADDR 0x014
+#define S5P_INT_STATUS 0x018
+#define S5P_INT_CLEAR 0x01C
+#define S5P_PAGE_FAULT_ADDR 0x024
+#define S5P_AW_FAULT_ADDR 0x028
+#define S5P_AR_FAULT_ADDR 0x02C
+#define S5P_DEFAULT_SLAVE_ADDR 0x030
+
+#endif /* __ASM_ARCH_REGS_SYSMMU_H */
--- /dev/null
+/*
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PLAT_S5P_REGS_USB_PHY_H
+#define __PLAT_S5P_REGS_USB_PHY_H
+
+#define EXYNOS4_HSOTG_PHYREG(x) ((x) + S3C_VA_USB_HSPHY)
+
+#define EXYNOS4_PHYPWR EXYNOS4_HSOTG_PHYREG(0x00)
+#define PHY1_HSIC_NORMAL_MASK (0xf << 9)
+#define PHY1_HSIC1_SLEEP (1 << 12)
+#define PHY1_HSIC1_FORCE_SUSPEND (1 << 11)
+#define PHY1_HSIC0_SLEEP (1 << 10)
+#define PHY1_HSIC0_FORCE_SUSPEND (1 << 9)
+
+#define PHY1_STD_NORMAL_MASK (0x7 << 6)
+#define PHY1_STD_SLEEP (1 << 8)
+#define PHY1_STD_ANALOG_POWERDOWN (1 << 7)
+#define PHY1_STD_FORCE_SUSPEND (1 << 6)
+
+#define PHY0_NORMAL_MASK (0x39 << 0)
+#define PHY0_SLEEP (1 << 5)
+#define PHY0_OTG_DISABLE (1 << 4)
+#define PHY0_ANALOG_POWERDOWN (1 << 3)
+#define PHY0_FORCE_SUSPEND (1 << 0)
+
+#define EXYNOS4_PHYCLK EXYNOS4_HSOTG_PHYREG(0x04)
+#define PHY1_COMMON_ON_N (1 << 7)
+#define PHY0_COMMON_ON_N (1 << 4)
+#define PHY0_ID_PULLUP (1 << 2)
+#define CLKSEL_MASK (0x3 << 0)
+#define CLKSEL_SHIFT (0)
+#define CLKSEL_48M (0x0 << 0)
+#define CLKSEL_12M (0x2 << 0)
+#define CLKSEL_24M (0x3 << 0)
+
+#define EXYNOS4_RSTCON EXYNOS4_HSOTG_PHYREG(0x08)
+#define HOST_LINK_PORT_SWRST_MASK (0xf << 6)
+#define HOST_LINK_PORT2_SWRST (1 << 9)
+#define HOST_LINK_PORT1_SWRST (1 << 8)
+#define HOST_LINK_PORT0_SWRST (1 << 7)
+#define HOST_LINK_ALL_SWRST (1 << 6)
+
+#define PHY1_SWRST_MASK (0x7 << 3)
+#define PHY1_HSIC_SWRST (1 << 5)
+#define PHY1_STD_SWRST (1 << 4)
+#define PHY1_ALL_SWRST (1 << 3)
+
+#define PHY0_SWRST_MASK (0x7 << 0)
+#define PHY0_PHYLINK_SWRST (1 << 2)
+#define PHY0_HLINK_SWRST (1 << 1)
+#define PHY0_SWRST (1 << 0)
+
+#define EXYNOS4_PHY1CON EXYNOS4_HSOTG_PHYREG(0x34)
+#define FPENABLEN (1 << 0)
+
+#endif /* __PLAT_S5P_REGS_USB_PHY_H */
--- /dev/null
+/* linux/arch/arm/mach-exynos4/include/mach/sysmmu.h
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Samsung sysmmu driver for EXYNOS4
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARM_ARCH_SYSMMU_H
+#define __ASM_ARM_ARCH_SYSMMU_H __FILE__
+
+enum exynos4_sysmmu_ips {
+ SYSMMU_MDMA,
+ SYSMMU_SSS,
+ SYSMMU_FIMC0,
+ SYSMMU_FIMC1,
+ SYSMMU_FIMC2,
+ SYSMMU_FIMC3,
+ SYSMMU_JPEG,
+ SYSMMU_FIMD0,
+ SYSMMU_FIMD1,
+ SYSMMU_PCIe,
+ SYSMMU_G2D,
+ SYSMMU_ROTATOR,
+ SYSMMU_MDMA2,
+ SYSMMU_TV,
+ SYSMMU_MFC_L,
+ SYSMMU_MFC_R,
+ EXYNOS4_SYSMMU_TOTAL_IPNUM,
+};
+
+#define S5P_SYSMMU_TOTAL_IPNUM EXYNOS4_SYSMMU_TOTAL_IPNUM
+
+extern const char *sysmmu_ips_name[EXYNOS4_SYSMMU_TOTAL_IPNUM];
+
+typedef enum exynos4_sysmmu_ips sysmmu_ips;
+
+void sysmmu_clk_init(struct device *dev, sysmmu_ips ips);
+void sysmmu_clk_enable(sysmmu_ips ips);
+void sysmmu_clk_disable(sysmmu_ips ips);
+
+#endif /* __ASM_ARM_ARCH_SYSMMU_H */
--- /dev/null
+/* linux/arch/arm/mach-exynos4/include/mach/system.h
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4 - system support header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+#include <plat/system-reset.h>
+
+static void arch_idle(void)
+{
+ /* nothing here yet */
+}
+#endif /* __ASM_ARCH_SYSTEM_H */
--- /dev/null
+/* linux/arch/arm/mach-exynos4/include/mach/timex.h
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Copyright (c) 2003-2010 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Based on arch/arm/mach-s5p6442/include/mach/timex.h
+ *
+ * EXYNOS4 - time parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H __FILE__
+
+/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
+ * a variable is useless. It seems as long as we make our timers an
+ * exact multiple of HZ, any value that makes a 1->1 correspondence
+ * for the time conversion functions to/from jiffies is acceptable.
+*/
+
+#define CLOCK_TICK_RATE 12000000
+
+#endif /* __ASM_ARCH_TIMEX_H */
--- /dev/null
+/* linux/arch/arm/mach-exynos4/include/mach/uncompress.h
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H __FILE__
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+ /* we do not need to do any cpu detection here at the moment. */
+
+ /*
+ * For preventing FIFO overrun or infinite loop of UART console,
+ * fifo_max should be the minimum fifo size of all of the UART channels
+ */
+ fifo_mask = S5PV210_UFSTAT_TXMASK;
+ fifo_max = 15 << S5PV210_UFSTAT_TXSHIFT;
+}
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
--- /dev/null
+/* linux/arch/arm/mach-exynos4/include/mach/vmalloc.h
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Based on arch/arm/mach-s5p6440/include/mach/vmalloc.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * EXYNOS4 vmalloc definition
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H __FILE__
+
+#define VMALLOC_END 0xF6000000UL
+
+#endif /* __ASM_ARCH_VMALLOC_H */
--- /dev/null
+/* linux/arch/arm/mach-exynos4/init.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/serial_core.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/regs-serial.h>
+
+static struct s3c24xx_uart_clksrc exynos4_serial_clocks[] = {
+ [0] = {
+ .name = "uclk1",
+ .divisor = 1,
+ .min_baud = 0,
+ .max_baud = 0,
+ },
+};
+
+/* uart registration process */
+void __init exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ struct s3c2410_uartcfg *tcfg = cfg;
+ u32 ucnt;
+
+ for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
+ if (!tcfg->clocks) {
+ tcfg->has_fracval = 1;
+ tcfg->clocks = exynos4_serial_clocks;
+ tcfg->clocks_size = ARRAY_SIZE(exynos4_serial_clocks);
+ }
+ tcfg->flags |= NO_NEED_CHECK_CLKSRC;
+ }
+
+ s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
+}
--- /dev/null
+/* linux/arch/arm/mach-exynos4/irq-combiner.c
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Based on arch/arm/common/gic.c
+ *
+ * IRQ COMBINER support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/io.h>
+
+#include <asm/mach/irq.h>
+
+#define COMBINER_ENABLE_SET 0x0
+#define COMBINER_ENABLE_CLEAR 0x4
+#define COMBINER_INT_STATUS 0xC
+
+static DEFINE_SPINLOCK(irq_controller_lock);
+
+struct combiner_chip_data {
+ unsigned int irq_offset;
+ unsigned int irq_mask;
+ void __iomem *base;
+};
+
+static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
+
+static inline void __iomem *combiner_base(struct irq_data *data)
+{
+ struct combiner_chip_data *combiner_data =
+ irq_data_get_irq_chip_data(data);
+
+ return combiner_data->base;
+}
+
+static void combiner_mask_irq(struct irq_data *data)
+{
+ u32 mask = 1 << (data->irq % 32);
+
+ __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR);
+}
+
+static void combiner_unmask_irq(struct irq_data *data)
+{
+ u32 mask = 1 << (data->irq % 32);
+
+ __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET);
+}
+
+static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
+{
+ struct combiner_chip_data *chip_data = irq_get_handler_data(irq);
+ struct irq_chip *chip = irq_get_chip(irq);
+ unsigned int cascade_irq, combiner_irq;
+ unsigned long status;
+
+ chained_irq_enter(chip, desc);
+
+ spin_lock(&irq_controller_lock);
+ status = __raw_readl(chip_data->base + COMBINER_INT_STATUS);
+ spin_unlock(&irq_controller_lock);
+ status &= chip_data->irq_mask;
+
+ if (status == 0)
+ goto out;
+
+ combiner_irq = __ffs(status);
+
+ cascade_irq = combiner_irq + (chip_data->irq_offset & ~31);
+ if (unlikely(cascade_irq >= NR_IRQS))
+ do_bad_IRQ(cascade_irq, desc);
+ else
+ generic_handle_irq(cascade_irq);
+
+ out:
+ chained_irq_exit(chip, desc);
+}
+
+static struct irq_chip combiner_chip = {
+ .name = "COMBINER",
+ .irq_mask = combiner_mask_irq,
+ .irq_unmask = combiner_unmask_irq,
+};
+
+void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq)
+{
+ if (combiner_nr >= MAX_COMBINER_NR)
+ BUG();
+ if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0)
+ BUG();
+ irq_set_chained_handler(irq, combiner_handle_cascade_irq);
+}
+
+void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
+ unsigned int irq_start)
+{
+ unsigned int i;
+
+ if (combiner_nr >= MAX_COMBINER_NR)
+ BUG();
+
+ combiner_data[combiner_nr].base = base;
+ combiner_data[combiner_nr].irq_offset = irq_start;
+ combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3);
+
+ /* Disable all interrupts */
+
+ __raw_writel(combiner_data[combiner_nr].irq_mask,
+ base + COMBINER_ENABLE_CLEAR);
+
+ /* Setup the Linux IRQ subsystem */
+
+ for (i = irq_start; i < combiner_data[combiner_nr].irq_offset
+ + MAX_IRQ_IN_COMBINER; i++) {
+ irq_set_chip_and_handler(i, &combiner_chip, handle_level_irq);
+ irq_set_chip_data(i, &combiner_data[combiner_nr]);
+ set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+ }
+}
--- /dev/null
+/* linux/arch/arm/mach-exynos4/irq-eint.c
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4 - IRQ EINT support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/gpio.h>
+
+#include <plat/pm.h>
+#include <plat/cpu.h>
+#include <plat/gpio-cfg.h>
+
+#include <mach/regs-gpio.h>
+
+#include <asm/mach/irq.h>
+
+static DEFINE_SPINLOCK(eint_lock);
+
+static unsigned int eint0_15_data[16];
+
+static unsigned int exynos4_get_irq_nr(unsigned int number)
+{
+ u32 ret = 0;
+
+ switch (number) {
+ case 0 ... 3:
+ ret = (number + IRQ_EINT0);
+ break;
+ case 4 ... 7:
+ ret = (number + (IRQ_EINT4 - 4));
+ break;
+ case 8 ... 15:
+ ret = (number + (IRQ_EINT8 - 8));
+ break;
+ default:
+ printk(KERN_ERR "number available : %d\n", number);
+ }
+
+ return ret;
+}
+
+static inline void exynos4_irq_eint_mask(struct irq_data *data)
+{
+ u32 mask;
+
+ spin_lock(&eint_lock);
+ mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+ mask |= eint_irq_to_bit(data->irq);
+ __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+ spin_unlock(&eint_lock);
+}
+
+static void exynos4_irq_eint_unmask(struct irq_data *data)
+{
+ u32 mask;
+
+ spin_lock(&eint_lock);
+ mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+ mask &= ~(eint_irq_to_bit(data->irq));
+ __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+ spin_unlock(&eint_lock);
+}
+
+static inline void exynos4_irq_eint_ack(struct irq_data *data)
+{
+ __raw_writel(eint_irq_to_bit(data->irq),
+ S5P_EINT_PEND(EINT_REG_NR(data->irq)));
+}
+
+static void exynos4_irq_eint_maskack(struct irq_data *data)
+{
+ exynos4_irq_eint_mask(data);
+ exynos4_irq_eint_ack(data);
+}
+
+static int exynos4_irq_eint_set_type(struct irq_data *data, unsigned int type)
+{
+ int offs = EINT_OFFSET(data->irq);
+ int shift;
+ u32 ctrl, mask;
+ u32 newvalue = 0;
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ newvalue = S5P_IRQ_TYPE_EDGE_RISING;
+ break;
+
+ case IRQ_TYPE_EDGE_FALLING:
+ newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
+ break;
+
+ case IRQ_TYPE_EDGE_BOTH:
+ newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
+ break;
+
+ case IRQ_TYPE_LEVEL_LOW:
+ newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
+ break;
+
+ case IRQ_TYPE_LEVEL_HIGH:
+ newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
+ break;
+
+ default:
+ printk(KERN_ERR "No such irq type %d", type);
+ return -EINVAL;
+ }
+
+ shift = (offs & 0x7) * 4;
+ mask = 0x7 << shift;
+
+ spin_lock(&eint_lock);
+ ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq)));
+ ctrl &= ~mask;
+ ctrl |= newvalue << shift;
+ __raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq)));
+ spin_unlock(&eint_lock);
+
+ switch (offs) {
+ case 0 ... 7:
+ s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
+ break;
+ case 8 ... 15:
+ s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
+ break;
+ case 16 ... 23:
+ s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
+ break;
+ case 24 ... 31:
+ s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
+ break;
+ default:
+ printk(KERN_ERR "No such irq number %d", offs);
+ }
+
+ return 0;
+}
+
+static struct irq_chip exynos4_irq_eint = {
+ .name = "exynos4-eint",
+ .irq_mask = exynos4_irq_eint_mask,
+ .irq_unmask = exynos4_irq_eint_unmask,
+ .irq_mask_ack = exynos4_irq_eint_maskack,
+ .irq_ack = exynos4_irq_eint_ack,
+ .irq_set_type = exynos4_irq_eint_set_type,
+#ifdef CONFIG_PM
+ .irq_set_wake = s3c_irqext_wake,
+#endif
+};
+
+/* exynos4_irq_demux_eint
+ *
+ * This function demuxes the IRQ from from EINTs 16 to 31.
+ * It is designed to be inlined into the specific handler
+ * s5p_irq_demux_eintX_Y.
+ *
+ * Each EINT pend/mask registers handle eight of them.
+ */
+static inline void exynos4_irq_demux_eint(unsigned int start)
+{
+ unsigned int irq;
+
+ u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
+ u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
+
+ status &= ~mask;
+ status &= 0xff;
+
+ while (status) {
+ irq = fls(status) - 1;
+ generic_handle_irq(irq + start);
+ status &= ~(1 << irq);
+ }
+}
+
+static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_get_chip(irq);
+ chained_irq_enter(chip, desc);
+ exynos4_irq_demux_eint(IRQ_EINT(16));
+ exynos4_irq_demux_eint(IRQ_EINT(24));
+ chained_irq_exit(chip, desc);
+}
+
+static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
+{
+ u32 *irq_data = irq_get_handler_data(irq);
+ struct irq_chip *chip = irq_get_chip(irq);
+
+ chained_irq_enter(chip, desc);
+ chip->irq_mask(&desc->irq_data);
+
+ if (chip->irq_ack)
+ chip->irq_ack(&desc->irq_data);
+
+ generic_handle_irq(*irq_data);
+
+ chip->irq_unmask(&desc->irq_data);
+ chained_irq_exit(chip, desc);
+}
+
+int __init exynos4_init_irq_eint(void)
+{
+ int irq;
+
+ for (irq = 0 ; irq <= 31 ; irq++) {
+ irq_set_chip_and_handler(IRQ_EINT(irq), &exynos4_irq_eint,
+ handle_level_irq);
+ set_irq_flags(IRQ_EINT(irq), IRQF_VALID);
+ }
+
+ irq_set_chained_handler(IRQ_EINT16_31, exynos4_irq_demux_eint16_31);
+
+ for (irq = 0 ; irq <= 15 ; irq++) {
+ eint0_15_data[irq] = IRQ_EINT(irq);
+
+ irq_set_handler_data(exynos4_get_irq_nr(irq),
+ &eint0_15_data[irq]);
+ irq_set_chained_handler(exynos4_get_irq_nr(irq),
+ exynos4_irq_eint0_15);
+ }
+
+ return 0;
+}
+
+arch_initcall(exynos4_init_irq_eint);
--- /dev/null
+/* linux/arch/arm/mach-exynos4/mach-armlex4210.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/smsc911x.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/exynos4.h>
+#include <plat/gpio-cfg.h>
+#include <plat/regs-serial.h>
+#include <plat/regs-srom.h>
+#include <plat/sdhci.h>
+
+#include <mach/map.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define ARMLEX4210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define ARMLEX4210_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define ARMLEX4210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S5PV210_UFCON_TXTRIG4 | \
+ S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg armlex4210_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = ARMLEX4210_UCON_DEFAULT,
+ .ulcon = ARMLEX4210_ULCON_DEFAULT,
+ .ufcon = ARMLEX4210_UFCON_DEFAULT,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = ARMLEX4210_UCON_DEFAULT,
+ .ulcon = ARMLEX4210_ULCON_DEFAULT,
+ .ufcon = ARMLEX4210_UFCON_DEFAULT,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = ARMLEX4210_UCON_DEFAULT,
+ .ulcon = ARMLEX4210_ULCON_DEFAULT,
+ .ufcon = ARMLEX4210_UFCON_DEFAULT,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = ARMLEX4210_UCON_DEFAULT,
+ .ulcon = ARMLEX4210_ULCON_DEFAULT,
+ .ufcon = ARMLEX4210_UFCON_DEFAULT,
+ },
+};
+
+static struct s3c_sdhci_platdata armlex4210_hsmmc0_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_PERMANENT,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
+ .max_width = 8,
+ .host_caps = MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata armlex4210_hsmmc2_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = EXYNOS4_GPX2(5),
+ .ext_cd_gpio_invert = 1,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+ .max_width = 4,
+};
+
+static struct s3c_sdhci_platdata armlex4210_hsmmc3_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_PERMANENT,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+ .max_width = 4,
+};
+
+static void __init armlex4210_sdhci_init(void)
+{
+ s3c_sdhci0_set_platdata(&armlex4210_hsmmc0_pdata);
+ s3c_sdhci2_set_platdata(&armlex4210_hsmmc2_pdata);
+ s3c_sdhci3_set_platdata(&armlex4210_hsmmc3_pdata);
+}
+
+static void __init armlex4210_wlan_init(void)
+{
+ /* enable */
+ s3c_gpio_cfgpin(EXYNOS4_GPX2(0), S3C_GPIO_SFN(0xf));
+ s3c_gpio_setpull(EXYNOS4_GPX2(0), S3C_GPIO_PULL_UP);
+
+ /* reset */
+ s3c_gpio_cfgpin(EXYNOS4_GPX1(6), S3C_GPIO_SFN(0xf));
+ s3c_gpio_setpull(EXYNOS4_GPX1(6), S3C_GPIO_PULL_UP);
+
+ /* wakeup */
+ s3c_gpio_cfgpin(EXYNOS4_GPX1(5), S3C_GPIO_SFN(0xf));
+ s3c_gpio_setpull(EXYNOS4_GPX1(5), S3C_GPIO_PULL_UP);
+}
+
+static struct resource armlex4210_smsc911x_resources[] = {
+ [0] = {
+ .start = EXYNOS4_PA_SROM_BANK(3),
+ .end = EXYNOS4_PA_SROM_BANK(3) + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_EINT(27),
+ .end = IRQ_EINT(27),
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
+ },
+};
+
+static struct smsc911x_platform_config smsc9215_config = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+ .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+ .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
+};
+
+static struct platform_device armlex4210_smsc911x = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(armlex4210_smsc911x_resources),
+ .resource = armlex4210_smsc911x_resources,
+ .dev = {
+ .platform_data = &smsc9215_config,
+ },
+};
+
+static struct platform_device *armlex4210_devices[] __initdata = {
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc2,
+ &s3c_device_hsmmc3,
+ &s3c_device_rtc,
+ &s3c_device_wdt,
+ &exynos4_device_sysmmu,
+ &samsung_asoc_dma,
+ &armlex4210_smsc911x,
+ &exynos4_device_ahci,
+};
+
+static void __init armlex4210_smsc911x_init(void)
+{
+ u32 cs1;
+
+ /* configure nCS1 width to 16 bits */
+ cs1 = __raw_readl(S5P_SROM_BW) &
+ ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
+ cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
+ (0 << S5P_SROM_BW__WAITENABLE__SHIFT) |
+ (1 << S5P_SROM_BW__ADDRMODE__SHIFT) |
+ (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
+ S5P_SROM_BW__NCS1__SHIFT;
+ __raw_writel(cs1, S5P_SROM_BW);
+
+ /* set timing for nCS1 suitable for ethernet chip */
+ __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
+ (0x9 << S5P_SROM_BCX__TACP__SHIFT) |
+ (0xc << S5P_SROM_BCX__TCAH__SHIFT) |
+ (0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
+ (0x6 << S5P_SROM_BCX__TACC__SHIFT) |
+ (0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
+ (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
+}
+
+static void __init armlex4210_map_io(void)
+{
+ s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s3c24xx_init_clocks(24000000);
+ s3c24xx_init_uarts(armlex4210_uartcfgs,
+ ARRAY_SIZE(armlex4210_uartcfgs));
+}
+
+static void __init armlex4210_machine_init(void)
+{
+ armlex4210_smsc911x_init();
+
+ armlex4210_sdhci_init();
+
+ armlex4210_wlan_init();
+
+ platform_add_devices(armlex4210_devices,
+ ARRAY_SIZE(armlex4210_devices));
+}
+
+MACHINE_START(ARMLEX4210, "ARMLEX4210")
+ /* Maintainer: Alim Akhtar <alim.akhtar@samsung.com> */
+ .atag_offset = 0x100,
+ .init_irq = exynos4_init_irq,
+ .map_io = armlex4210_map_io,
+ .init_machine = armlex4210_machine_init,
+ .timer = &exynos4_timer,
+MACHINE_END
--- /dev/null
+/*
+ * linux/arch/arm/mach-exynos4/mach-nuri.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/i2c/atmel_mxt_ts.h>
+#include <linux/i2c-gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio.h>
+#include <linux/power/max8903_charger.h>
+#include <linux/power/max17042_battery.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/mfd/max8997.h>
+#include <linux/mfd/max8997-private.h>
+#include <linux/mmc/host.h>
+#include <linux/fb.h>
+#include <linux/pwm_backlight.h>
+
+#include <video/platform_lcd.h>
+#include <media/m5mols.h>
+#include <media/s5p_fimc.h>
+#include <media/v4l2-mediabus.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <plat/adc.h>
+#include <plat/regs-fb-v4.h>
+#include <plat/regs-serial.h>
+#include <plat/exynos4.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/fb.h>
+#include <plat/sdhci.h>
+#include <plat/ehci.h>
+#include <plat/clock.h>
+#include <plat/gpio-cfg.h>
+#include <plat/iic.h>
+#include <plat/mfc.h>
+#include <plat/pd.h>
+#include <plat/fimc-core.h>
+#include <plat/camport.h>
+#include <plat/mipi_csis.h>
+
+#include <mach/map.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define NURI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define NURI_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define NURI_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S5PV210_UFCON_TXTRIG256 | \
+ S5PV210_UFCON_RXTRIG256)
+
+enum fixed_regulator_id {
+ FIXED_REG_ID_MMC = 0,
+ FIXED_REG_ID_MAX8903,
+ FIXED_REG_ID_CAM_A28V,
+ FIXED_REG_ID_CAM_12V,
+};
+
+static struct s3c2410_uartcfg nuri_uartcfgs[] __initdata = {
+ {
+ .hwport = 0,
+ .ucon = NURI_UCON_DEFAULT,
+ .ulcon = NURI_ULCON_DEFAULT,
+ .ufcon = NURI_UFCON_DEFAULT,
+ },
+ {
+ .hwport = 1,
+ .ucon = NURI_UCON_DEFAULT,
+ .ulcon = NURI_ULCON_DEFAULT,
+ .ufcon = NURI_UFCON_DEFAULT,
+ },
+ {
+ .hwport = 2,
+ .ucon = NURI_UCON_DEFAULT,
+ .ulcon = NURI_ULCON_DEFAULT,
+ .ufcon = NURI_UFCON_DEFAULT,
+ },
+ {
+ .hwport = 3,
+ .ucon = NURI_UCON_DEFAULT,
+ .ulcon = NURI_ULCON_DEFAULT,
+ .ufcon = NURI_UFCON_DEFAULT,
+ },
+};
+
+/* eMMC */
+static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = {
+ .max_width = 8,
+ .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
+ MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
+ MMC_CAP_DISABLE | MMC_CAP_ERASE),
+ .cd_type = S3C_SDHCI_CD_PERMANENT,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct regulator_consumer_supply emmc_supplies[] = {
+ REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
+ REGULATOR_SUPPLY("vmmc", "dw_mmc"),
+};
+
+static struct regulator_init_data emmc_fixed_voltage_init_data = {
+ .constraints = {
+ .name = "VMEM_VDD_2.8V",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(emmc_supplies),
+ .consumer_supplies = emmc_supplies,
+};
+
+static struct fixed_voltage_config emmc_fixed_voltage_config = {
+ .supply_name = "MASSMEMORY_EN (inverted)",
+ .microvolts = 2800000,
+ .gpio = EXYNOS4_GPL1(1),
+ .enable_high = false,
+ .init_data = &emmc_fixed_voltage_init_data,
+};
+
+static struct platform_device emmc_fixed_voltage = {
+ .name = "reg-fixed-voltage",
+ .id = FIXED_REG_ID_MMC,
+ .dev = {
+ .platform_data = &emmc_fixed_voltage_config,
+ },
+};
+
+/* SD */
+static struct s3c_sdhci_platdata nuri_hsmmc2_data __initdata = {
+ .max_width = 4,
+ .host_caps = MMC_CAP_4_BIT_DATA |
+ MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
+ MMC_CAP_DISABLE,
+ .ext_cd_gpio = EXYNOS4_GPX3(3), /* XEINT_27 */
+ .ext_cd_gpio_invert = 1,
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+/* WLAN */
+static struct s3c_sdhci_platdata nuri_hsmmc3_data __initdata = {
+ .max_width = 4,
+ .host_caps = MMC_CAP_4_BIT_DATA |
+ MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+ .cd_type = S3C_SDHCI_CD_EXTERNAL,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static void __init nuri_sdhci_init(void)
+{
+ s3c_sdhci0_set_platdata(&nuri_hsmmc0_data);
+ s3c_sdhci2_set_platdata(&nuri_hsmmc2_data);
+ s3c_sdhci3_set_platdata(&nuri_hsmmc3_data);
+}
+
+/* GPIO KEYS */
+static struct gpio_keys_button nuri_gpio_keys_tables[] = {
+ {
+ .code = KEY_VOLUMEUP,
+ .gpio = EXYNOS4_GPX2(0), /* XEINT16 */
+ .desc = "gpio-keys: KEY_VOLUMEUP",
+ .type = EV_KEY,
+ .active_low = 1,
+ .debounce_interval = 1,
+ }, {
+ .code = KEY_VOLUMEDOWN,
+ .gpio = EXYNOS4_GPX2(1), /* XEINT17 */
+ .desc = "gpio-keys: KEY_VOLUMEDOWN",
+ .type = EV_KEY,
+ .active_low = 1,
+ .debounce_interval = 1,
+ }, {
+ .code = KEY_POWER,
+ .gpio = EXYNOS4_GPX2(7), /* XEINT23 */
+ .desc = "gpio-keys: KEY_POWER",
+ .type = EV_KEY,
+ .active_low = 1,
+ .wakeup = 1,
+ .debounce_interval = 1,
+ },
+};
+
+static struct gpio_keys_platform_data nuri_gpio_keys_data = {
+ .buttons = nuri_gpio_keys_tables,
+ .nbuttons = ARRAY_SIZE(nuri_gpio_keys_tables),
+};
+
+static struct platform_device nuri_gpio_keys = {
+ .name = "gpio-keys",
+ .dev = {
+ .platform_data = &nuri_gpio_keys_data,
+ },
+};
+
+/* Frame Buffer */
+static struct s3c_fb_pd_win nuri_fb_win0 = {
+ .win_mode = {
+ .left_margin = 64,
+ .right_margin = 16,
+ .upper_margin = 64,
+ .lower_margin = 1,
+ .hsync_len = 48,
+ .vsync_len = 3,
+ .xres = 1280,
+ .yres = 800,
+ .refresh = 60,
+ },
+ .max_bpp = 24,
+ .default_bpp = 16,
+ .virtual_x = 1280,
+ .virtual_y = 800,
+};
+
+static struct s3c_fb_platdata nuri_fb_pdata __initdata = {
+ .win[0] = &nuri_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
+ VIDCON0_CLKSEL_LCD,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
+};
+
+static void nuri_lcd_power_on(struct plat_lcd_data *pd, unsigned int power)
+{
+ int gpio = EXYNOS4_GPE1(5);
+
+ gpio_request(gpio, "LVDS_nSHDN");
+ gpio_direction_output(gpio, power);
+ gpio_free(gpio);
+}
+
+static int nuri_bl_init(struct device *dev)
+{
+ int ret, gpio = EXYNOS4_GPE2(3);
+
+ ret = gpio_request(gpio, "LCD_LDO_EN");
+ if (!ret)
+ gpio_direction_output(gpio, 0);
+
+ return ret;
+}
+
+static int nuri_bl_notify(struct device *dev, int brightness)
+{
+ if (brightness < 1)
+ brightness = 0;
+
+ gpio_set_value(EXYNOS4_GPE2(3), 1);
+
+ return brightness;
+}
+
+static void nuri_bl_exit(struct device *dev)
+{
+ gpio_free(EXYNOS4_GPE2(3));
+}
+
+/* nuri pwm backlight */
+static struct platform_pwm_backlight_data nuri_backlight_data = {
+ .pwm_id = 0,
+ .pwm_period_ns = 30000,
+ .max_brightness = 100,
+ .dft_brightness = 50,
+ .init = nuri_bl_init,
+ .notify = nuri_bl_notify,
+ .exit = nuri_bl_exit,
+};
+
+static struct platform_device nuri_backlight_device = {
+ .name = "pwm-backlight",
+ .id = -1,
+ .dev = {
+ .parent = &s3c_device_timer[0].dev,
+ .platform_data = &nuri_backlight_data,
+ },
+};
+
+static struct plat_lcd_data nuri_lcd_platform_data = {
+ .set_power = nuri_lcd_power_on,
+};
+
+static struct platform_device nuri_lcd_device = {
+ .name = "platform-lcd",
+ .id = -1,
+ .dev = {
+ .platform_data = &nuri_lcd_platform_data,
+ },
+};
+
+/* I2C1 */
+static struct i2c_board_info i2c1_devs[] __initdata = {
+ /* Gyro, To be updated */
+};
+
+/* TSP */
+static u8 mxt_init_vals[] = {
+ /* MXT_GEN_COMMAND(6) */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ /* MXT_GEN_POWER(7) */
+ 0x20, 0xff, 0x32,
+ /* MXT_GEN_ACQUIRE(8) */
+ 0x0a, 0x00, 0x05, 0x00, 0x00, 0x00, 0x09, 0x23,
+ /* MXT_TOUCH_MULTI(9) */
+ 0x00, 0x00, 0x00, 0x13, 0x0b, 0x00, 0x00, 0x00, 0x02, 0x00,
+ 0x00, 0x01, 0x01, 0x0e, 0x0a, 0x0a, 0x0a, 0x0a, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00,
+ /* MXT_TOUCH_KEYARRAY(15) */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00,
+ 0x00,
+ /* MXT_SPT_GPIOPWM(19) */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ /* MXT_PROCI_GRIPFACE(20) */
+ 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x28, 0x04,
+ 0x0f, 0x0a,
+ /* MXT_PROCG_NOISE(22) */
+ 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x23, 0x00,
+ 0x00, 0x05, 0x0f, 0x19, 0x23, 0x2d, 0x03,
+ /* MXT_TOUCH_PROXIMITY(23) */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00,
+ /* MXT_PROCI_ONETOUCH(24) */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ /* MXT_SPT_SELFTEST(25) */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+ /* MXT_PROCI_TWOTOUCH(27) */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ /* MXT_SPT_CTECONFIG(28) */
+ 0x00, 0x00, 0x02, 0x08, 0x10, 0x00,
+};
+
+static struct mxt_platform_data mxt_platform_data = {
+ .config = mxt_init_vals,
+ .config_length = ARRAY_SIZE(mxt_init_vals),
+
+ .x_line = 18,
+ .y_line = 11,
+ .x_size = 1024,
+ .y_size = 600,
+ .blen = 0x1,
+ .threshold = 0x28,
+ .voltage = 2800000, /* 2.8V */
+ .orient = MXT_DIAGONAL_COUNTER,
+ .irqflags = IRQF_TRIGGER_FALLING,
+};
+
+static struct s3c2410_platform_i2c i2c3_data __initdata = {
+ .flags = 0,
+ .bus_num = 3,
+ .slave_addr = 0x10,
+ .frequency = 400 * 1000,
+ .sda_delay = 100,
+};
+
+static struct i2c_board_info i2c3_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("atmel_mxt_ts", 0x4a),
+ .platform_data = &mxt_platform_data,
+ .irq = IRQ_EINT(4),
+ },
+};
+
+static void __init nuri_tsp_init(void)
+{
+ int gpio;
+
+ /* TOUCH_INT: XEINT_4 */
+ gpio = EXYNOS4_GPX0(4);
+ gpio_request(gpio, "TOUCH_INT");
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+}
+
+static struct regulator_consumer_supply __initdata max8997_ldo1_[] = {
+ REGULATOR_SUPPLY("vdd", "s5p-adc"), /* Used by CPU's ADC drv */
+};
+static struct regulator_consumer_supply __initdata max8997_ldo3_[] = {
+ REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), /* MIPI */
+};
+static struct regulator_consumer_supply __initdata max8997_ldo4_[] = {
+ REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"), /* MIPI */
+};
+static struct regulator_consumer_supply __initdata max8997_ldo5_[] = {
+ REGULATOR_SUPPLY("vhsic", "modemctl"), /* MODEM */
+};
+static struct regulator_consumer_supply __initdata max8997_ldo7_[] = {
+ REGULATOR_SUPPLY("dig_18", "0-001f"), /* HCD803 */
+};
+static struct regulator_consumer_supply __initdata max8997_ldo8_[] = {
+ REGULATOR_SUPPLY("vusb_d", NULL), /* Used by CPU */
+ REGULATOR_SUPPLY("vdac", NULL), /* Used by CPU */
+};
+static struct regulator_consumer_supply __initdata max8997_ldo11_[] = {
+ REGULATOR_SUPPLY("vcc", "platform-lcd"), /* U804 LVDS */
+};
+static struct regulator_consumer_supply __initdata max8997_ldo12_[] = {
+ REGULATOR_SUPPLY("vddio", "6-003c"), /* HDC802 */
+};
+static struct regulator_consumer_supply __initdata max8997_ldo13_[] = {
+ REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"), /* TFLASH */
+};
+static struct regulator_consumer_supply __initdata max8997_ldo14_[] = {
+ REGULATOR_SUPPLY("inmotor", "max8997-haptic"),
+};
+static struct regulator_consumer_supply __initdata max8997_ldo15_[] = {
+ REGULATOR_SUPPLY("avdd", "3-004a"), /* Touch Screen */
+};
+static struct regulator_consumer_supply __initdata max8997_ldo16_[] = {
+ REGULATOR_SUPPLY("d_sensor", "0-001f"), /* HDC803 */
+};
+static struct regulator_consumer_supply __initdata max8997_ldo18_[] = {
+ REGULATOR_SUPPLY("vdd", "3-004a"), /* Touch Screen */
+};
+static struct regulator_consumer_supply __initdata max8997_buck1_[] = {
+ REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */
+};
+static struct regulator_consumer_supply __initdata max8997_buck2_[] = {
+ REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */
+};
+static struct regulator_consumer_supply __initdata max8997_buck3_[] = {
+ REGULATOR_SUPPLY("vdd", "mali_dev.0"), /* G3D of Exynos 4 */
+};
+static struct regulator_consumer_supply __initdata max8997_buck4_[] = {
+ REGULATOR_SUPPLY("core", "0-001f"), /* HDC803 */
+};
+static struct regulator_consumer_supply __initdata max8997_buck6_[] = {
+ REGULATOR_SUPPLY("dig_28", "0-001f"), /* pin "7" of HDC803 */
+};
+static struct regulator_consumer_supply __initdata max8997_esafeout1_[] = {
+ REGULATOR_SUPPLY("usb_vbus", NULL), /* CPU's USB OTG */
+};
+static struct regulator_consumer_supply __initdata max8997_esafeout2_[] = {
+ REGULATOR_SUPPLY("usb_vbus", "modemctl"), /* VBUS of Modem */
+};
+
+static struct regulator_consumer_supply __initdata max8997_charger_[] = {
+ REGULATOR_SUPPLY("vinchg1", "charger-manager.0"),
+};
+static struct regulator_consumer_supply __initdata max8997_chg_toff_[] = {
+ REGULATOR_SUPPLY("vinchg_stop", NULL), /* for jack interrupt handlers */
+};
+
+static struct regulator_consumer_supply __initdata max8997_32khz_ap_[] = {
+ REGULATOR_SUPPLY("gps_clk", "bcm4751"),
+ REGULATOR_SUPPLY("bt_clk", "bcm4330-b1"),
+ REGULATOR_SUPPLY("wifi_clk", "bcm433-b1"),
+};
+
+static struct regulator_init_data __initdata max8997_ldo1_data = {
+ .constraints = {
+ .name = "VADC_3.3V_C210",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo1_),
+ .consumer_supplies = max8997_ldo1_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo2_data = {
+ .constraints = {
+ .name = "VALIVE_1.1V_C210",
+ .min_uV = 1100000,
+ .max_uV = 1100000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_ldo3_data = {
+ .constraints = {
+ .name = "VUSB_1.1V_C210",
+ .min_uV = 1100000,
+ .max_uV = 1100000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo3_),
+ .consumer_supplies = max8997_ldo3_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo4_data = {
+ .constraints = {
+ .name = "VMIPI_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo4_),
+ .consumer_supplies = max8997_ldo4_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo5_data = {
+ .constraints = {
+ .name = "VHSIC_1.2V_C210",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo5_),
+ .consumer_supplies = max8997_ldo5_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo6_data = {
+ .constraints = {
+ .name = "VCC_1.8V_PDA",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_ldo7_data = {
+ .constraints = {
+ .name = "CAM_ISP_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo7_),
+ .consumer_supplies = max8997_ldo7_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo8_data = {
+ .constraints = {
+ .name = "VUSB/VDAC_3.3V_C210",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo8_),
+ .consumer_supplies = max8997_ldo8_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo9_data = {
+ .constraints = {
+ .name = "VCC_2.8V_PDA",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_ldo10_data = {
+ .constraints = {
+ .name = "VPLL_1.1V_C210",
+ .min_uV = 1100000,
+ .max_uV = 1100000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_ldo11_data = {
+ .constraints = {
+ .name = "LVDS_VDD3.3V",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .boot_on = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo11_),
+ .consumer_supplies = max8997_ldo11_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo12_data = {
+ .constraints = {
+ .name = "VT_CAM_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo12_),
+ .consumer_supplies = max8997_ldo12_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo13_data = {
+ .constraints = {
+ .name = "VTF_2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo13_),
+ .consumer_supplies = max8997_ldo13_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo14_data = {
+ .constraints = {
+ .name = "VCC_3.0V_MOTOR",
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo14_),
+ .consumer_supplies = max8997_ldo14_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo15_data = {
+ .constraints = {
+ .name = "VTOUCH_ADVV2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo15_),
+ .consumer_supplies = max8997_ldo15_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo16_data = {
+ .constraints = {
+ .name = "CAM_SENSOR_IO_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo16_),
+ .consumer_supplies = max8997_ldo16_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo18_data = {
+ .constraints = {
+ .name = "VTOUCH_VDD2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo18_),
+ .consumer_supplies = max8997_ldo18_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo21_data = {
+ .constraints = {
+ .name = "VDDQ_M1M2_1.2V",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_buck1_data = {
+ .constraints = {
+ .name = "VARM_1.2V_C210",
+ .min_uV = 900000,
+ .max_uV = 1350000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .always_on = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_buck1_),
+ .consumer_supplies = max8997_buck1_,
+};
+
+static struct regulator_init_data __initdata max8997_buck2_data = {
+ .constraints = {
+ .name = "VINT_1.1V_C210",
+ .min_uV = 900000,
+ .max_uV = 1100000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .always_on = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_buck2_),
+ .consumer_supplies = max8997_buck2_,
+};
+
+static struct regulator_init_data __initdata max8997_buck3_data = {
+ .constraints = {
+ .name = "VG3D_1.1V_C210",
+ .min_uV = 900000,
+ .max_uV = 1100000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_buck3_),
+ .consumer_supplies = max8997_buck3_,
+};
+
+static struct regulator_init_data __initdata max8997_buck4_data = {
+ .constraints = {
+ .name = "CAM_ISP_CORE_1.2V",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_buck4_),
+ .consumer_supplies = max8997_buck4_,
+};
+
+static struct regulator_init_data __initdata max8997_buck5_data = {
+ .constraints = {
+ .name = "VMEM_1.2V_C210",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_buck6_data = {
+ .constraints = {
+ .name = "CAM_AF_2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_buck6_),
+ .consumer_supplies = max8997_buck6_,
+};
+
+static struct regulator_init_data __initdata max8997_buck7_data = {
+ .constraints = {
+ .name = "VCC_SUB_2.0V",
+ .min_uV = 2000000,
+ .max_uV = 2000000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_32khz_ap_data = {
+ .constraints = {
+ .name = "32KHz AP",
+ .always_on = 1,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_32khz_ap_),
+ .consumer_supplies = max8997_32khz_ap_,
+};
+
+static struct regulator_init_data __initdata max8997_32khz_cp_data = {
+ .constraints = {
+ .name = "32KHz CP",
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_vichg_data = {
+ .constraints = {
+ .name = "VICHG",
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_esafeout1_data = {
+ .constraints = {
+ .name = "SAFEOUT1",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_esafeout1_),
+ .consumer_supplies = max8997_esafeout1_,
+};
+
+static struct regulator_init_data __initdata max8997_esafeout2_data = {
+ .constraints = {
+ .name = "SAFEOUT2",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_esafeout2_),
+ .consumer_supplies = max8997_esafeout2_,
+};
+
+static struct regulator_init_data __initdata max8997_charger_cv_data = {
+ .constraints = {
+ .name = "CHARGER_CV",
+ .min_uV = 4200000,
+ .max_uV = 4200000,
+ .apply_uV = 1,
+ },
+};
+
+static struct regulator_init_data __initdata max8997_charger_data = {
+ .constraints = {
+ .name = "CHARGER",
+ .min_uA = 200000,
+ .max_uA = 950000,
+ .boot_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS |
+ REGULATOR_CHANGE_CURRENT,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_charger_),
+ .consumer_supplies = max8997_charger_,
+};
+
+static struct regulator_init_data __initdata max8997_charger_topoff_data = {
+ .constraints = {
+ .name = "CHARGER TOPOFF",
+ .min_uA = 50000,
+ .max_uA = 200000,
+ .valid_ops_mask = REGULATOR_CHANGE_CURRENT,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_chg_toff_),
+ .consumer_supplies = max8997_chg_toff_,
+};
+
+static struct max8997_regulator_data __initdata nuri_max8997_regulators[] = {
+ { MAX8997_LDO1, &max8997_ldo1_data },
+ { MAX8997_LDO2, &max8997_ldo2_data },
+ { MAX8997_LDO3, &max8997_ldo3_data },
+ { MAX8997_LDO4, &max8997_ldo4_data },
+ { MAX8997_LDO5, &max8997_ldo5_data },
+ { MAX8997_LDO6, &max8997_ldo6_data },
+ { MAX8997_LDO7, &max8997_ldo7_data },
+ { MAX8997_LDO8, &max8997_ldo8_data },
+ { MAX8997_LDO9, &max8997_ldo9_data },
+ { MAX8997_LDO10, &max8997_ldo10_data },
+ { MAX8997_LDO11, &max8997_ldo11_data },
+ { MAX8997_LDO12, &max8997_ldo12_data },
+ { MAX8997_LDO13, &max8997_ldo13_data },
+ { MAX8997_LDO14, &max8997_ldo14_data },
+ { MAX8997_LDO15, &max8997_ldo15_data },
+ { MAX8997_LDO16, &max8997_ldo16_data },
+
+ { MAX8997_LDO18, &max8997_ldo18_data },
+ { MAX8997_LDO21, &max8997_ldo21_data },
+
+ { MAX8997_BUCK1, &max8997_buck1_data },
+ { MAX8997_BUCK2, &max8997_buck2_data },
+ { MAX8997_BUCK3, &max8997_buck3_data },
+ { MAX8997_BUCK4, &max8997_buck4_data },
+ { MAX8997_BUCK5, &max8997_buck5_data },
+ { MAX8997_BUCK6, &max8997_buck6_data },
+ { MAX8997_BUCK7, &max8997_buck7_data },
+
+ { MAX8997_EN32KHZ_AP, &max8997_32khz_ap_data },
+ { MAX8997_EN32KHZ_CP, &max8997_32khz_cp_data },
+
+ { MAX8997_ENVICHG, &max8997_vichg_data },
+ { MAX8997_ESAFEOUT1, &max8997_esafeout1_data },
+ { MAX8997_ESAFEOUT2, &max8997_esafeout2_data },
+ { MAX8997_CHARGER_CV, &max8997_charger_cv_data },
+ { MAX8997_CHARGER, &max8997_charger_data },
+ { MAX8997_CHARGER_TOPOFF, &max8997_charger_topoff_data },
+};
+
+static struct max8997_platform_data __initdata nuri_max8997_pdata = {
+ .wakeup = 1,
+
+ .num_regulators = ARRAY_SIZE(nuri_max8997_regulators),
+ .regulators = nuri_max8997_regulators,
+
+ .buck125_gpios = { EXYNOS4_GPX0(5), EXYNOS4_GPX0(6), EXYNOS4_GPL0(0) },
+ .buck2_gpiodvs = true,
+
+ .buck1_voltage[0] = 1350000, /* 1.35V */
+ .buck1_voltage[1] = 1300000, /* 1.3V */
+ .buck1_voltage[2] = 1250000, /* 1.25V */
+ .buck1_voltage[3] = 1200000, /* 1.2V */
+ .buck1_voltage[4] = 1150000, /* 1.15V */
+ .buck1_voltage[5] = 1100000, /* 1.1V */
+ .buck1_voltage[6] = 1000000, /* 1.0V */
+ .buck1_voltage[7] = 950000, /* 0.95V */
+
+ .buck2_voltage[0] = 1100000, /* 1.1V */
+ .buck2_voltage[1] = 1000000, /* 1.0V */
+ .buck2_voltage[2] = 950000, /* 0.95V */
+ .buck2_voltage[3] = 900000, /* 0.9V */
+ .buck2_voltage[4] = 1100000, /* 1.1V */
+ .buck2_voltage[5] = 1000000, /* 1.0V */
+ .buck2_voltage[6] = 950000, /* 0.95V */
+ .buck2_voltage[7] = 900000, /* 0.9V */
+
+ .buck5_voltage[0] = 1200000, /* 1.2V */
+ .buck5_voltage[1] = 1200000, /* 1.2V */
+ .buck5_voltage[2] = 1200000, /* 1.2V */
+ .buck5_voltage[3] = 1200000, /* 1.2V */
+ .buck5_voltage[4] = 1200000, /* 1.2V */
+ .buck5_voltage[5] = 1200000, /* 1.2V */
+ .buck5_voltage[6] = 1200000, /* 1.2V */
+ .buck5_voltage[7] = 1200000, /* 1.2V */
+};
+
+/* GPIO I2C 5 (PMIC) */
+enum { I2C5_MAX8997 };
+static struct i2c_board_info i2c5_devs[] __initdata = {
+ [I2C5_MAX8997] = {
+ I2C_BOARD_INFO("max8997", 0xCC >> 1),
+ .platform_data = &nuri_max8997_pdata,
+ },
+};
+
+static struct max17042_platform_data nuri_battery_platform_data = {
+};
+
+/* GPIO I2C 9 (Fuel Gauge) */
+static struct i2c_gpio_platform_data i2c9_gpio_data = {
+ .sda_pin = EXYNOS4_GPY4(0), /* XM0ADDR_8 */
+ .scl_pin = EXYNOS4_GPY4(1), /* XM0ADDR_9 */
+};
+static struct platform_device i2c9_gpio = {
+ .name = "i2c-gpio",
+ .id = 9,
+ .dev = {
+ .platform_data = &i2c9_gpio_data,
+ },
+};
+enum { I2C9_MAX17042};
+static struct i2c_board_info i2c9_devs[] __initdata = {
+ [I2C9_MAX17042] = {
+ I2C_BOARD_INFO("max17042", 0x36),
+ .platform_data = &nuri_battery_platform_data,
+ },
+};
+
+/* MAX8903 Secondary Charger */
+static struct regulator_consumer_supply supplies_max8903[] = {
+ REGULATOR_SUPPLY("vinchg2", "charger-manager.0"),
+};
+
+static struct regulator_init_data max8903_charger_en_data = {
+ .constraints = {
+ .name = "VOUT_CHARGER",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(supplies_max8903),
+ .consumer_supplies = supplies_max8903,
+};
+
+static struct fixed_voltage_config max8903_charger_en = {
+ .supply_name = "VOUT_CHARGER",
+ .microvolts = 5000000, /* Assume 5VDC */
+ .gpio = EXYNOS4_GPY4(5), /* TA_EN negaged */
+ .enable_high = 0, /* Enable = Low */
+ .enabled_at_boot = 1,
+ .init_data = &max8903_charger_en_data,
+};
+
+static struct platform_device max8903_fixed_reg_dev = {
+ .name = "reg-fixed-voltage",
+ .id = FIXED_REG_ID_MAX8903,
+ .dev = { .platform_data = &max8903_charger_en },
+};
+
+static struct max8903_pdata nuri_max8903 = {
+ /*
+ * cen: don't control with the driver, let it be
+ * controlled by regulator above
+ */
+ .dok = EXYNOS4_GPX1(4), /* TA_nCONNECTED */
+ /* uok, usus: not connected */
+ .chg = EXYNOS4_GPE2(0), /* TA_nCHG */
+ /* flt: vcc_1.8V_pda */
+ .dcm = EXYNOS4_GPL0(1), /* CURR_ADJ */
+
+ .dc_valid = true,
+ .usb_valid = false, /* USB is not wired to MAX8903 */
+};
+
+static struct platform_device nuri_max8903_device = {
+ .name = "max8903-charger",
+ .dev = {
+ .platform_data = &nuri_max8903,
+ },
+};
+
+static void __init nuri_power_init(void)
+{
+ int gpio;
+ int irq_base = IRQ_GPIO_END + 1;
+ int ta_en = 0;
+
+ nuri_max8997_pdata.irq_base = irq_base;
+ irq_base += MAX8997_IRQ_NR;
+
+ gpio = EXYNOS4_GPX0(7);
+ gpio_request(gpio, "AP_PMIC_IRQ");
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+
+ gpio = EXYNOS4_GPX2(3);
+ gpio_request(gpio, "FUEL_ALERT");
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+
+ gpio = nuri_max8903.dok;
+ gpio_request(gpio, "TA_nCONNECTED");
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ ta_en = gpio_get_value(gpio) ? 0 : 1;
+
+ gpio = nuri_max8903.chg;
+ gpio_request(gpio, "TA_nCHG");
+ gpio_direction_input(gpio);
+
+ gpio = nuri_max8903.dcm;
+ gpio_request(gpio, "CURR_ADJ");
+ gpio_direction_output(gpio, ta_en);
+}
+
+/* USB EHCI */
+static struct s5p_ehci_platdata nuri_ehci_pdata;
+
+static void __init nuri_ehci_init(void)
+{
+ struct s5p_ehci_platdata *pdata = &nuri_ehci_pdata;
+
+ s5p_ehci_set_platdata(pdata);
+}
+
+/* CAMERA */
+static struct regulator_consumer_supply cam_vdda_supply[] = {
+ REGULATOR_SUPPLY("a_sensor", "0-001f"),
+};
+
+static struct regulator_init_data cam_vdda_reg_init_data = {
+ .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
+ .num_consumer_supplies = ARRAY_SIZE(cam_vdda_supply),
+ .consumer_supplies = cam_vdda_supply,
+};
+
+static struct fixed_voltage_config cam_vdda_fixed_voltage_cfg = {
+ .supply_name = "CAM_IO_EN",
+ .microvolts = 2800000,
+ .gpio = EXYNOS4_GPE2(1), /* CAM_IO_EN */
+ .enable_high = 1,
+ .init_data = &cam_vdda_reg_init_data,
+};
+
+static struct platform_device cam_vdda_fixed_rdev = {
+ .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_A28V,
+ .dev = { .platform_data = &cam_vdda_fixed_voltage_cfg },
+};
+
+static struct regulator_consumer_supply camera_8m_12v_supply =
+ REGULATOR_SUPPLY("dig_12", "0-001f");
+
+static struct regulator_init_data cam_8m_12v_reg_init_data = {
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &camera_8m_12v_supply,
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS
+ },
+};
+
+static struct fixed_voltage_config cam_8m_12v_fixed_voltage_cfg = {
+ .supply_name = "8M_1.2V",
+ .microvolts = 1200000,
+ .gpio = EXYNOS4_GPE2(5), /* 8M_1.2V_EN */
+ .enable_high = 1,
+ .init_data = &cam_8m_12v_reg_init_data,
+};
+
+static struct platform_device cam_8m_12v_fixed_rdev = {
+ .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_12V,
+ .dev = { .platform_data = &cam_8m_12v_fixed_voltage_cfg },
+};
+
+static struct s5p_platform_mipi_csis mipi_csis_platdata = {
+ .clk_rate = 166000000UL,
+ .lanes = 2,
+ .alignment = 32,
+ .hs_settle = 12,
+ .phy_enable = s5p_csis_phy_enable,
+};
+
+#define GPIO_CAM_MEGA_RST EXYNOS4_GPY3(7) /* ISP_RESET */
+#define GPIO_CAM_8M_ISP_INT EXYNOS4_GPL2(5)
+
+static struct m5mols_platform_data m5mols_platdata = {
+ .gpio_reset = GPIO_CAM_MEGA_RST,
+};
+
+static struct i2c_board_info m5mols_board_info = {
+ I2C_BOARD_INFO("M5MOLS", 0x1F),
+ .platform_data = &m5mols_platdata,
+};
+
+static struct s5p_fimc_isp_info nuri_camera_sensors[] = {
+ {
+ .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
+ V4L2_MBUS_VSYNC_ACTIVE_LOW,
+ .bus_type = FIMC_MIPI_CSI2,
+ .board_info = &m5mols_board_info,
+ .clk_frequency = 24000000UL,
+ .csi_data_align = 32,
+ },
+};
+
+static struct s5p_platform_fimc fimc_md_platdata = {
+ .isp_info = nuri_camera_sensors,
+ .num_clients = ARRAY_SIZE(nuri_camera_sensors),
+};
+
+static struct gpio nuri_camera_gpios[] = {
+ { GPIO_CAM_8M_ISP_INT, GPIOF_IN, "8M_ISP_INT" },
+ { GPIO_CAM_MEGA_RST, GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" },
+};
+
+static void nuri_camera_init(void)
+{
+ s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
+ &s5p_device_mipi_csis0);
+ s3c_set_platdata(&fimc_md_platdata, sizeof(fimc_md_platdata),
+ &s5p_device_fimc_md);
+
+ if (gpio_request_array(nuri_camera_gpios,
+ ARRAY_SIZE(nuri_camera_gpios))) {
+ pr_err("%s: GPIO request failed\n", __func__);
+ return;
+ }
+
+ m5mols_board_info.irq = s5p_register_gpio_interrupt(GPIO_CAM_8M_ISP_INT);
+ if (!IS_ERR_VALUE(m5mols_board_info.irq))
+ s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xF));
+ else
+ pr_err("%s: Failed to configure 8M_ISP_INT GPIO\n", __func__);
+
+ /* Free GPIOs controlled directly by the sensor drivers. */
+ gpio_free(GPIO_CAM_MEGA_RST);
+
+ if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A)) {
+ pr_err("%s: Camera port A setup failed\n", __func__);
+ return;
+ }
+ /* Increase drive strength of the sensor clock output */
+ s5p_gpio_set_drvstr(EXYNOS4_GPJ1(3), S5P_GPIO_DRVSTR_LV4);
+}
+
+static struct s3c2410_platform_i2c nuri_i2c0_platdata __initdata = {
+ .frequency = 400000U,
+ .sda_delay = 200,
+};
+
+static struct platform_device *nuri_devices[] __initdata = {
+ /* Samsung Platform Devices */
+ &s3c_device_i2c5, /* PMIC should initialize first */
+ &s3c_device_i2c0,
+ &emmc_fixed_voltage,
+ &s5p_device_mipi_csis0,
+ &s5p_device_fimc0,
+ &s5p_device_fimc1,
+ &s5p_device_fimc2,
+ &s5p_device_fimc3,
+ &s5p_device_fimd0,
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc2,
+ &s3c_device_hsmmc3,
+ &s3c_device_wdt,
+ &s3c_device_timer[0],
+ &s5p_device_ehci,
+ &s3c_device_i2c3,
+ &i2c9_gpio,
+ &s3c_device_adc,
+ &s3c_device_rtc,
+ &s5p_device_mfc,
+ &s5p_device_mfc_l,
+ &s5p_device_mfc_r,
+ &exynos4_device_pd[PD_MFC],
+ &exynos4_device_pd[PD_LCD0],
+ &exynos4_device_pd[PD_CAM],
+ &s5p_device_fimc_md,
+
+ /* NURI Devices */
+ &nuri_gpio_keys,
+ &nuri_lcd_device,
+ &nuri_backlight_device,
+ &max8903_fixed_reg_dev,
+ &nuri_max8903_device,
+ &cam_vdda_fixed_rdev,
+ &cam_8m_12v_fixed_rdev,
+};
+
+static void __init nuri_map_io(void)
+{
+ s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s3c24xx_init_clocks(24000000);
+ s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
+}
+
+static void __init nuri_reserve(void)
+{
+ s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
+}
+
+static void __init nuri_machine_init(void)
+{
+ nuri_sdhci_init();
+ nuri_tsp_init();
+ nuri_power_init();
+
+ s3c_i2c0_set_platdata(&nuri_i2c0_platdata);
+ i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
+ s3c_i2c3_set_platdata(&i2c3_data);
+ i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
+ s3c_i2c5_set_platdata(NULL);
+ i2c5_devs[I2C5_MAX8997].irq = gpio_to_irq(EXYNOS4_GPX0(7));
+ i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
+ i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3));
+ i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs));
+
+ s5p_fimd0_set_platdata(&nuri_fb_pdata);
+
+ nuri_camera_init();
+
+ nuri_ehci_init();
+ clk_xusbxti.rate = 24000000;
+
+ /* Last */
+ platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
+ s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
+ s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
+
+ s5p_device_fimc0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+ s5p_device_fimc1.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+ s5p_device_fimc2.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+ s5p_device_fimc3.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+ s5p_device_mipi_csis0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+}
+
+MACHINE_START(NURI, "NURI")
+ /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
+ .atag_offset = 0x100,
+ .init_irq = exynos4_init_irq,
+ .map_io = nuri_map_io,
+ .init_machine = nuri_machine_init,
+ .timer = &exynos4_timer,
+ .reserve = &nuri_reserve,
+MACHINE_END
--- /dev/null
+/* linux/arch/arm/mach-exynos4/mach-origen.c
+ *
+ * Copyright (c) 2011 Insignal Co., Ltd.
+ * http://www.insignal.co.kr/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/serial_core.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/input.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/max8997.h>
+#include <linux/lcd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <video/platform_lcd.h>
+
+#include <plat/regs-serial.h>
+#include <plat/regs-fb-v4.h>
+#include <plat/exynos4.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/sdhci.h>
+#include <plat/iic.h>
+#include <plat/ehci.h>
+#include <plat/clock.h>
+#include <plat/gpio-cfg.h>
+#include <plat/backlight.h>
+#include <plat/pd.h>
+#include <plat/fb.h>
+#include <plat/mfc.h>
+
+#include <mach/map.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define ORIGEN_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define ORIGEN_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define ORIGEN_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S5PV210_UFCON_TXTRIG4 | \
+ S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = ORIGEN_UCON_DEFAULT,
+ .ulcon = ORIGEN_ULCON_DEFAULT,
+ .ufcon = ORIGEN_UFCON_DEFAULT,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = ORIGEN_UCON_DEFAULT,
+ .ulcon = ORIGEN_ULCON_DEFAULT,
+ .ufcon = ORIGEN_UFCON_DEFAULT,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = ORIGEN_UCON_DEFAULT,
+ .ulcon = ORIGEN_ULCON_DEFAULT,
+ .ufcon = ORIGEN_UFCON_DEFAULT,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = ORIGEN_UCON_DEFAULT,
+ .ulcon = ORIGEN_ULCON_DEFAULT,
+ .ufcon = ORIGEN_UFCON_DEFAULT,
+ },
+};
+
+static struct regulator_consumer_supply __initdata ldo3_consumer[] = {
+ REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), /* MIPI */
+ REGULATOR_SUPPLY("vdd", "exynos4-hdmi"), /* HDMI */
+ REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"), /* HDMI */
+};
+static struct regulator_consumer_supply __initdata ldo6_consumer[] = {
+ REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"), /* MIPI */
+};
+static struct regulator_consumer_supply __initdata ldo7_consumer[] = {
+ REGULATOR_SUPPLY("avdd", "alc5625"), /* Realtek ALC5625 */
+};
+static struct regulator_consumer_supply __initdata ldo8_consumer[] = {
+ REGULATOR_SUPPLY("vdd", "s5p-adc"), /* ADC */
+ REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"), /* HDMI */
+};
+static struct regulator_consumer_supply __initdata ldo9_consumer[] = {
+ REGULATOR_SUPPLY("dvdd", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
+};
+static struct regulator_consumer_supply __initdata ldo11_consumer[] = {
+ REGULATOR_SUPPLY("dvdd", "alc5625"), /* Realtek ALC5625 */
+};
+static struct regulator_consumer_supply __initdata ldo14_consumer[] = {
+ REGULATOR_SUPPLY("avdd18", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
+};
+static struct regulator_consumer_supply __initdata ldo17_consumer[] = {
+ REGULATOR_SUPPLY("vdd33", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
+};
+static struct regulator_consumer_supply __initdata buck1_consumer[] = {
+ REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */
+};
+static struct regulator_consumer_supply __initdata buck2_consumer[] = {
+ REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */
+};
+static struct regulator_consumer_supply __initdata buck3_consumer[] = {
+ REGULATOR_SUPPLY("vdd_g3d", "mali_drm"), /* G3D */
+};
+static struct regulator_consumer_supply __initdata buck7_consumer[] = {
+ REGULATOR_SUPPLY("vcc", "platform-lcd"), /* LCD */
+};
+
+static struct regulator_init_data __initdata max8997_ldo1_data = {
+ .constraints = {
+ .name = "VDD_ABB_3.3V",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_ldo2_data = {
+ .constraints = {
+ .name = "VDD_ALIVE_1.1V",
+ .min_uV = 1100000,
+ .max_uV = 1100000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_ldo3_data = {
+ .constraints = {
+ .name = "VMIPI_1.1V",
+ .min_uV = 1100000,
+ .max_uV = 1100000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo3_consumer),
+ .consumer_supplies = ldo3_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo4_data = {
+ .constraints = {
+ .name = "VDD_RTC_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_ldo6_data = {
+ .constraints = {
+ .name = "VMIPI_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo6_consumer),
+ .consumer_supplies = ldo6_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo7_data = {
+ .constraints = {
+ .name = "VDD_AUD_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo7_consumer),
+ .consumer_supplies = ldo7_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo8_data = {
+ .constraints = {
+ .name = "VADC_3.3V",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo8_consumer),
+ .consumer_supplies = ldo8_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo9_data = {
+ .constraints = {
+ .name = "DVDD_SWB_2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo9_consumer),
+ .consumer_supplies = ldo9_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo10_data = {
+ .constraints = {
+ .name = "VDD_PLL_1.1V",
+ .min_uV = 1100000,
+ .max_uV = 1100000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_ldo11_data = {
+ .constraints = {
+ .name = "VDD_AUD_3V",
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo11_consumer),
+ .consumer_supplies = ldo11_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo14_data = {
+ .constraints = {
+ .name = "AVDD18_SWB_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo14_consumer),
+ .consumer_supplies = ldo14_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo17_data = {
+ .constraints = {
+ .name = "VDD_SWB_3.3V",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo17_consumer),
+ .consumer_supplies = ldo17_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo21_data = {
+ .constraints = {
+ .name = "VDD_MIF_1.2V",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_buck1_data = {
+ .constraints = {
+ .name = "VDD_ARM_1.2V",
+ .min_uV = 950000,
+ .max_uV = 1350000,
+ .always_on = 1,
+ .boot_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(buck1_consumer),
+ .consumer_supplies = buck1_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_buck2_data = {
+ .constraints = {
+ .name = "VDD_INT_1.1V",
+ .min_uV = 900000,
+ .max_uV = 1100000,
+ .always_on = 1,
+ .boot_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(buck2_consumer),
+ .consumer_supplies = buck2_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_buck3_data = {
+ .constraints = {
+ .name = "VDD_G3D_1.1V",
+ .min_uV = 900000,
+ .max_uV = 1100000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(buck3_consumer),
+ .consumer_supplies = buck3_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_buck5_data = {
+ .constraints = {
+ .name = "VDDQ_M1M2_1.2V",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_buck7_data = {
+ .constraints = {
+ .name = "VDD_LCD_3.3V",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .boot_on = 1,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(buck7_consumer),
+ .consumer_supplies = buck7_consumer,
+};
+
+static struct max8997_regulator_data __initdata origen_max8997_regulators[] = {
+ { MAX8997_LDO1, &max8997_ldo1_data },
+ { MAX8997_LDO2, &max8997_ldo2_data },
+ { MAX8997_LDO3, &max8997_ldo3_data },
+ { MAX8997_LDO4, &max8997_ldo4_data },
+ { MAX8997_LDO6, &max8997_ldo6_data },
+ { MAX8997_LDO7, &max8997_ldo7_data },
+ { MAX8997_LDO8, &max8997_ldo8_data },
+ { MAX8997_LDO9, &max8997_ldo9_data },
+ { MAX8997_LDO10, &max8997_ldo10_data },
+ { MAX8997_LDO11, &max8997_ldo11_data },
+ { MAX8997_LDO14, &max8997_ldo14_data },
+ { MAX8997_LDO17, &max8997_ldo17_data },
+ { MAX8997_LDO21, &max8997_ldo21_data },
+ { MAX8997_BUCK1, &max8997_buck1_data },
+ { MAX8997_BUCK2, &max8997_buck2_data },
+ { MAX8997_BUCK3, &max8997_buck3_data },
+ { MAX8997_BUCK5, &max8997_buck5_data },
+ { MAX8997_BUCK7, &max8997_buck7_data },
+};
+
+struct max8997_platform_data __initdata origen_max8997_pdata = {
+ .num_regulators = ARRAY_SIZE(origen_max8997_regulators),
+ .regulators = origen_max8997_regulators,
+
+ .wakeup = true,
+ .buck1_gpiodvs = false,
+ .buck2_gpiodvs = false,
+ .buck5_gpiodvs = false,
+ .irq_base = IRQ_GPIO_END + 1,
+
+ .ignore_gpiodvs_side_effect = true,
+ .buck125_default_idx = 0x0,
+
+ .buck125_gpios[0] = EXYNOS4_GPX0(0),
+ .buck125_gpios[1] = EXYNOS4_GPX0(1),
+ .buck125_gpios[2] = EXYNOS4_GPX0(2),
+
+ .buck1_voltage[0] = 1350000,
+ .buck1_voltage[1] = 1300000,
+ .buck1_voltage[2] = 1250000,
+ .buck1_voltage[3] = 1200000,
+ .buck1_voltage[4] = 1150000,
+ .buck1_voltage[5] = 1100000,
+ .buck1_voltage[6] = 1000000,
+ .buck1_voltage[7] = 950000,
+
+ .buck2_voltage[0] = 1100000,
+ .buck2_voltage[1] = 1100000,
+ .buck2_voltage[2] = 1100000,
+ .buck2_voltage[3] = 1100000,
+ .buck2_voltage[4] = 1000000,
+ .buck2_voltage[5] = 1000000,
+ .buck2_voltage[6] = 1000000,
+ .buck2_voltage[7] = 1000000,
+
+ .buck5_voltage[0] = 1200000,
+ .buck5_voltage[1] = 1200000,
+ .buck5_voltage[2] = 1200000,
+ .buck5_voltage[3] = 1200000,
+ .buck5_voltage[4] = 1200000,
+ .buck5_voltage[5] = 1200000,
+ .buck5_voltage[6] = 1200000,
+ .buck5_voltage[7] = 1200000,
+};
+
+/* I2C0 */
+static struct i2c_board_info i2c0_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("max8997", (0xCC >> 1)),
+ .platform_data = &origen_max8997_pdata,
+ .irq = IRQ_EINT(4),
+ },
+};
+
+static struct s3c_sdhci_platdata origen_hsmmc0_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_INTERNAL,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_INTERNAL,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+/* USB EHCI */
+static struct s5p_ehci_platdata origen_ehci_pdata;
+
+static void __init origen_ehci_init(void)
+{
+ struct s5p_ehci_platdata *pdata = &origen_ehci_pdata;
+
+ s5p_ehci_set_platdata(pdata);
+}
+
+static struct gpio_keys_button origen_gpio_keys_table[] = {
+ {
+ .code = KEY_MENU,
+ .gpio = EXYNOS4_GPX1(5),
+ .desc = "gpio-keys: KEY_MENU",
+ .type = EV_KEY,
+ .active_low = 1,
+ .wakeup = 1,
+ .debounce_interval = 1,
+ }, {
+ .code = KEY_HOME,
+ .gpio = EXYNOS4_GPX1(6),
+ .desc = "gpio-keys: KEY_HOME",
+ .type = EV_KEY,
+ .active_low = 1,
+ .wakeup = 1,
+ .debounce_interval = 1,
+ }, {
+ .code = KEY_BACK,
+ .gpio = EXYNOS4_GPX1(7),
+ .desc = "gpio-keys: KEY_BACK",
+ .type = EV_KEY,
+ .active_low = 1,
+ .wakeup = 1,
+ .debounce_interval = 1,
+ }, {
+ .code = KEY_UP,
+ .gpio = EXYNOS4_GPX2(0),
+ .desc = "gpio-keys: KEY_UP",
+ .type = EV_KEY,
+ .active_low = 1,
+ .wakeup = 1,
+ .debounce_interval = 1,
+ }, {
+ .code = KEY_DOWN,
+ .gpio = EXYNOS4_GPX2(1),
+ .desc = "gpio-keys: KEY_DOWN",
+ .type = EV_KEY,
+ .active_low = 1,
+ .wakeup = 1,
+ .debounce_interval = 1,
+ },
+};
+
+static struct gpio_keys_platform_data origen_gpio_keys_data = {
+ .buttons = origen_gpio_keys_table,
+ .nbuttons = ARRAY_SIZE(origen_gpio_keys_table),
+};
+
+static struct platform_device origen_device_gpiokeys = {
+ .name = "gpio-keys",
+ .dev = {
+ .platform_data = &origen_gpio_keys_data,
+ },
+};
+
+static void lcd_hv070wsa_set_power(struct plat_lcd_data *pd, unsigned int power)
+{
+ int ret;
+
+ if (power)
+ ret = gpio_request_one(EXYNOS4_GPE3(4),
+ GPIOF_OUT_INIT_HIGH, "GPE3_4");
+ else
+ ret = gpio_request_one(EXYNOS4_GPE3(4),
+ GPIOF_OUT_INIT_LOW, "GPE3_4");
+
+ gpio_free(EXYNOS4_GPE3(4));
+
+ if (ret)
+ pr_err("failed to request gpio for LCD power: %d\n", ret);
+}
+
+static struct plat_lcd_data origen_lcd_hv070wsa_data = {
+ .set_power = lcd_hv070wsa_set_power,
+};
+
+static struct platform_device origen_lcd_hv070wsa = {
+ .name = "platform-lcd",
+ .dev.parent = &s5p_device_fimd0.dev,
+ .dev.platform_data = &origen_lcd_hv070wsa_data,
+};
+
+static struct s3c_fb_pd_win origen_fb_win0 = {
+ .win_mode = {
+ .left_margin = 64,
+ .right_margin = 16,
+ .upper_margin = 64,
+ .lower_margin = 16,
+ .hsync_len = 48,
+ .vsync_len = 3,
+ .xres = 1024,
+ .yres = 600,
+ },
+ .max_bpp = 32,
+ .default_bpp = 24,
+};
+
+static struct s3c_fb_platdata origen_lcd_pdata __initdata = {
+ .win[0] = &origen_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
+};
+
+static struct platform_device *origen_devices[] __initdata = {
+ &s3c_device_hsmmc2,
+ &s3c_device_hsmmc0,
+ &s3c_device_i2c0,
+ &s3c_device_rtc,
+ &s3c_device_wdt,
+ &s5p_device_ehci,
+ &s5p_device_fimc0,
+ &s5p_device_fimc1,
+ &s5p_device_fimc2,
+ &s5p_device_fimc3,
+ &s5p_device_fimd0,
+ &s5p_device_hdmi,
+ &s5p_device_i2c_hdmiphy,
+ &s5p_device_mfc,
+ &s5p_device_mfc_l,
+ &s5p_device_mfc_r,
+ &s5p_device_mixer,
+ &exynos4_device_pd[PD_LCD0],
+ &exynos4_device_pd[PD_TV],
+ &exynos4_device_pd[PD_G3D],
+ &exynos4_device_pd[PD_LCD1],
+ &exynos4_device_pd[PD_CAM],
+ &exynos4_device_pd[PD_GPS],
+ &exynos4_device_pd[PD_MFC],
+ &origen_device_gpiokeys,
+ &origen_lcd_hv070wsa,
+};
+
+/* LCD Backlight data */
+static struct samsung_bl_gpio_info origen_bl_gpio_info = {
+ .no = EXYNOS4_GPD0(0),
+ .func = S3C_GPIO_SFN(2),
+};
+
+static struct platform_pwm_backlight_data origen_bl_data = {
+ .pwm_id = 0,
+ .pwm_period_ns = 1000,
+};
+
+static void s5p_tv_setup(void)
+{
+ /* Direct HPD to HDMI chip */
+ gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug");
+ s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
+ s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
+}
+
+static void __init origen_map_io(void)
+{
+ s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s3c24xx_init_clocks(24000000);
+ s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
+}
+
+static void __init origen_power_init(void)
+{
+ gpio_request(EXYNOS4_GPX0(4), "PMIC_IRQ");
+ s3c_gpio_cfgpin(EXYNOS4_GPX0(4), S3C_GPIO_SFN(0xf));
+ s3c_gpio_setpull(EXYNOS4_GPX0(4), S3C_GPIO_PULL_NONE);
+}
+
+static void __init origen_reserve(void)
+{
+ s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
+}
+
+static void __init origen_machine_init(void)
+{
+ origen_power_init();
+
+ s3c_i2c0_set_platdata(NULL);
+ i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
+
+ /*
+ * Since sdhci instance 2 can contain a bootable media,
+ * sdhci instance 0 is registered after instance 2.
+ */
+ s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
+ s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata);
+
+ origen_ehci_init();
+ clk_xusbxti.rate = 24000000;
+
+ s5p_tv_setup();
+ s5p_i2c_hdmiphy_set_platdata(NULL);
+
+ s5p_fimd0_set_platdata(&origen_lcd_pdata);
+
+ platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
+
+ s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
+
+ s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
+ s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
+
+ s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
+
+ samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);
+}
+
+MACHINE_START(ORIGEN, "ORIGEN")
+ /* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */
+ .atag_offset = 0x100,
+ .init_irq = exynos4_init_irq,
+ .map_io = origen_map_io,
+ .init_machine = origen_machine_init,
+ .timer = &exynos4_timer,
+ .reserve = &origen_reserve,
+MACHINE_END
--- /dev/null
+/*
+ * linux/arch/arm/mach-exynos4/mach-smdk4x12.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/mfd/max8997.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/pwm_backlight.h>
+#include <linux/regulator/machine.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <plat/backlight.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/exynos4.h>
+#include <plat/gpio-cfg.h>
+#include <plat/iic.h>
+#include <plat/keypad.h>
+#include <plat/regs-serial.h>
+#include <plat/sdhci.h>
+
+#include <mach/map.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define SMDK4X12_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define SMDK4X12_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define SMDK4X12_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S5PV210_UFCON_TXTRIG4 | \
+ S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdk4x12_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = SMDK4X12_UCON_DEFAULT,
+ .ulcon = SMDK4X12_ULCON_DEFAULT,
+ .ufcon = SMDK4X12_UFCON_DEFAULT,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = SMDK4X12_UCON_DEFAULT,
+ .ulcon = SMDK4X12_ULCON_DEFAULT,
+ .ufcon = SMDK4X12_UFCON_DEFAULT,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = SMDK4X12_UCON_DEFAULT,
+ .ulcon = SMDK4X12_ULCON_DEFAULT,
+ .ufcon = SMDK4X12_UFCON_DEFAULT,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = SMDK4X12_UCON_DEFAULT,
+ .ulcon = SMDK4X12_ULCON_DEFAULT,
+ .ufcon = SMDK4X12_UFCON_DEFAULT,
+ },
+};
+
+static struct s3c_sdhci_platdata smdk4x12_hsmmc2_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_INTERNAL,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
+ .max_width = 8,
+ .host_caps = MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata smdk4x12_hsmmc3_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_INTERNAL,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct regulator_consumer_supply max8997_buck1 =
+ REGULATOR_SUPPLY("vdd_arm", NULL);
+
+static struct regulator_consumer_supply max8997_buck2 =
+ REGULATOR_SUPPLY("vdd_int", NULL);
+
+static struct regulator_consumer_supply max8997_buck3 =
+ REGULATOR_SUPPLY("vdd_g3d", NULL);
+
+static struct regulator_init_data max8997_buck1_data = {
+ .constraints = {
+ .name = "VDD_ARM_SMDK4X12",
+ .min_uV = 925000,
+ .max_uV = 1350000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &max8997_buck1,
+};
+
+static struct regulator_init_data max8997_buck2_data = {
+ .constraints = {
+ .name = "VDD_INT_SMDK4X12",
+ .min_uV = 950000,
+ .max_uV = 1150000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &max8997_buck2,
+};
+
+static struct regulator_init_data max8997_buck3_data = {
+ .constraints = {
+ .name = "VDD_G3D_SMDK4X12",
+ .min_uV = 950000,
+ .max_uV = 1150000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &max8997_buck3,
+};
+
+static struct max8997_regulator_data smdk4x12_max8997_regulators[] = {
+ { MAX8997_BUCK1, &max8997_buck1_data },
+ { MAX8997_BUCK2, &max8997_buck2_data },
+ { MAX8997_BUCK3, &max8997_buck3_data },
+};
+
+static struct max8997_platform_data smdk4x12_max8997_pdata = {
+ .num_regulators = ARRAY_SIZE(smdk4x12_max8997_regulators),
+ .regulators = smdk4x12_max8997_regulators,
+
+ .buck1_voltage[0] = 1100000, /* 1.1V */
+ .buck1_voltage[1] = 1100000, /* 1.1V */
+ .buck1_voltage[2] = 1100000, /* 1.1V */
+ .buck1_voltage[3] = 1100000, /* 1.1V */
+ .buck1_voltage[4] = 1100000, /* 1.1V */
+ .buck1_voltage[5] = 1100000, /* 1.1V */
+ .buck1_voltage[6] = 1000000, /* 1.0V */
+ .buck1_voltage[7] = 950000, /* 0.95V */
+
+ .buck2_voltage[0] = 1100000, /* 1.1V */
+ .buck2_voltage[1] = 1000000, /* 1.0V */
+ .buck2_voltage[2] = 950000, /* 0.95V */
+ .buck2_voltage[3] = 900000, /* 0.9V */
+ .buck2_voltage[4] = 1100000, /* 1.1V */
+ .buck2_voltage[5] = 1000000, /* 1.0V */
+ .buck2_voltage[6] = 950000, /* 0.95V */
+ .buck2_voltage[7] = 900000, /* 0.9V */
+
+ .buck5_voltage[0] = 1100000, /* 1.1V */
+ .buck5_voltage[1] = 1100000, /* 1.1V */
+ .buck5_voltage[2] = 1100000, /* 1.1V */
+ .buck5_voltage[3] = 1100000, /* 1.1V */
+ .buck5_voltage[4] = 1100000, /* 1.1V */
+ .buck5_voltage[5] = 1100000, /* 1.1V */
+ .buck5_voltage[6] = 1100000, /* 1.1V */
+ .buck5_voltage[7] = 1100000, /* 1.1V */
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs0[] __initdata = {
+ {
+ I2C_BOARD_INFO("max8997", 0x66),
+ .platform_data = &smdk4x12_max8997_pdata,
+ }
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs1[] __initdata = {
+ { I2C_BOARD_INFO("wm8994", 0x1a), }
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs3[] __initdata = {
+ /* nothing here yet */
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs7[] __initdata = {
+ /* nothing here yet */
+};
+
+static struct samsung_bl_gpio_info smdk4x12_bl_gpio_info = {
+ .no = EXYNOS4_GPD0(1),
+ .func = S3C_GPIO_SFN(2),
+};
+
+static struct platform_pwm_backlight_data smdk4x12_bl_data = {
+ .pwm_id = 1,
+ .pwm_period_ns = 1000,
+};
+
+static uint32_t smdk4x12_keymap[] __initdata = {
+ /* KEY(row, col, keycode) */
+ KEY(1, 0, KEY_D), KEY(1, 1, KEY_A), KEY(1, 2, KEY_B),
+ KEY(1, 3, KEY_E), KEY(1, 4, KEY_C)
+};
+
+static struct matrix_keymap_data smdk4x12_keymap_data __initdata = {
+ .keymap = smdk4x12_keymap,
+ .keymap_size = ARRAY_SIZE(smdk4x12_keymap),
+};
+
+static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = {
+ .keymap_data = &smdk4x12_keymap_data,
+ .rows = 2,
+ .cols = 5,
+};
+
+static struct platform_device *smdk4x12_devices[] __initdata = {
+ &s3c_device_hsmmc2,
+ &s3c_device_hsmmc3,
+ &s3c_device_i2c0,
+ &s3c_device_i2c1,
+ &s3c_device_i2c3,
+ &s3c_device_i2c7,
+ &s3c_device_rtc,
+ &s3c_device_wdt,
+ &samsung_device_keypad,
+};
+
+static void __init smdk4x12_map_io(void)
+{
+ clk_xusbxti.rate = 24000000;
+
+ s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s3c24xx_init_clocks(clk_xusbxti.rate);
+ s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
+}
+
+static void __init smdk4x12_machine_init(void)
+{
+ s3c_i2c0_set_platdata(NULL);
+ i2c_register_board_info(0, smdk4x12_i2c_devs0,
+ ARRAY_SIZE(smdk4x12_i2c_devs0));
+
+ s3c_i2c1_set_platdata(NULL);
+ i2c_register_board_info(1, smdk4x12_i2c_devs1,
+ ARRAY_SIZE(smdk4x12_i2c_devs1));
+
+ s3c_i2c3_set_platdata(NULL);
+ i2c_register_board_info(3, smdk4x12_i2c_devs3,
+ ARRAY_SIZE(smdk4x12_i2c_devs3));
+
+ s3c_i2c7_set_platdata(NULL);
+ i2c_register_board_info(7, smdk4x12_i2c_devs7,
+ ARRAY_SIZE(smdk4x12_i2c_devs7));
+
+ samsung_bl_set(&smdk4x12_bl_gpio_info, &smdk4x12_bl_data);
+
+ samsung_keypad_set_platdata(&smdk4x12_keypad_data);
+
+ s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata);
+ s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata);
+
+ platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices));
+}
+
+MACHINE_START(SMDK4212, "SMDK4212")
+ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+ .atag_offset = 0x100,
+ .init_irq = exynos4_init_irq,
+ .map_io = smdk4x12_map_io,
+ .init_machine = smdk4x12_machine_init,
+ .timer = &exynos4_timer,
+MACHINE_END
+
+MACHINE_START(SMDK4412, "SMDK4412")
+ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+ /* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
+ .atag_offset = 0x100,
+ .init_irq = exynos4_init_irq,
+ .map_io = smdk4x12_map_io,
+ .init_machine = smdk4x12_machine_init,
+ .timer = &exynos4_timer,
+MACHINE_END
--- /dev/null
+/* linux/arch/arm/mach-exynos4/mach-smdkv310.c
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/serial_core.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/lcd.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/smsc911x.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/pwm_backlight.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <video/platform_lcd.h>
+#include <plat/regs-serial.h>
+#include <plat/regs-srom.h>
+#include <plat/regs-fb-v4.h>
+#include <plat/exynos4.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/fb.h>
+#include <plat/keypad.h>
+#include <plat/sdhci.h>
+#include <plat/iic.h>
+#include <plat/pd.h>
+#include <plat/gpio-cfg.h>
+#include <plat/backlight.h>
+#include <plat/mfc.h>
+#include <plat/ehci.h>
+#include <plat/clock.h>
+
+#include <mach/map.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define SMDKV310_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define SMDKV310_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define SMDKV310_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S5PV210_UFCON_TXTRIG4 | \
+ S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = SMDKV310_UCON_DEFAULT,
+ .ulcon = SMDKV310_ULCON_DEFAULT,
+ .ufcon = SMDKV310_UFCON_DEFAULT,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = SMDKV310_UCON_DEFAULT,
+ .ulcon = SMDKV310_ULCON_DEFAULT,
+ .ufcon = SMDKV310_UFCON_DEFAULT,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = SMDKV310_UCON_DEFAULT,
+ .ulcon = SMDKV310_ULCON_DEFAULT,
+ .ufcon = SMDKV310_UFCON_DEFAULT,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = SMDKV310_UCON_DEFAULT,
+ .ulcon = SMDKV310_ULCON_DEFAULT,
+ .ufcon = SMDKV310_UFCON_DEFAULT,
+ },
+};
+
+static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_INTERNAL,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
+ .max_width = 8,
+ .host_caps = MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata smdkv310_hsmmc1_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = EXYNOS4_GPK0(2),
+ .ext_cd_gpio_invert = 1,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_INTERNAL,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
+ .max_width = 8,
+ .host_caps = MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata smdkv310_hsmmc3_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = EXYNOS4_GPK2(2),
+ .ext_cd_gpio_invert = 1,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
+ unsigned int power)
+{
+ if (power) {
+#if !defined(CONFIG_BACKLIGHT_PWM)
+ gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0");
+ gpio_free(EXYNOS4_GPD0(1));
+#endif
+ /* fire nRESET on power up */
+ gpio_request(EXYNOS4_GPX0(6), "GPX0");
+
+ gpio_direction_output(EXYNOS4_GPX0(6), 1);
+ mdelay(100);
+
+ gpio_set_value(EXYNOS4_GPX0(6), 0);
+ mdelay(10);
+
+ gpio_set_value(EXYNOS4_GPX0(6), 1);
+ mdelay(10);
+
+ gpio_free(EXYNOS4_GPX0(6));
+ } else {
+#if !defined(CONFIG_BACKLIGHT_PWM)
+ gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0");
+ gpio_free(EXYNOS4_GPD0(1));
+#endif
+ }
+}
+
+static struct plat_lcd_data smdkv310_lcd_lte480wv_data = {
+ .set_power = lcd_lte480wv_set_power,
+};
+
+static struct platform_device smdkv310_lcd_lte480wv = {
+ .name = "platform-lcd",
+ .dev.parent = &s5p_device_fimd0.dev,
+ .dev.platform_data = &smdkv310_lcd_lte480wv_data,
+};
+
+static struct s3c_fb_pd_win smdkv310_fb_win0 = {
+ .win_mode = {
+ .left_margin = 13,
+ .right_margin = 8,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 24,
+};
+
+static struct s3c_fb_platdata smdkv310_lcd0_pdata __initdata = {
+ .win[0] = &smdkv310_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
+};
+
+static struct resource smdkv310_smsc911x_resources[] = {
+ [0] = {
+ .start = EXYNOS4_PA_SROM_BANK(1),
+ .end = EXYNOS4_PA_SROM_BANK(1) + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_EINT(5),
+ .end = IRQ_EINT(5),
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+ },
+};
+
+static struct smsc911x_platform_config smsc9215_config = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+ .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+ .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
+};
+
+static struct platform_device smdkv310_smsc911x = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smdkv310_smsc911x_resources),
+ .resource = smdkv310_smsc911x_resources,
+ .dev = {
+ .platform_data = &smsc9215_config,
+ },
+};
+
+static uint32_t smdkv310_keymap[] __initdata = {
+ /* KEY(row, col, keycode) */
+ KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
+ KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
+ KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
+ KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
+};
+
+static struct matrix_keymap_data smdkv310_keymap_data __initdata = {
+ .keymap = smdkv310_keymap,
+ .keymap_size = ARRAY_SIZE(smdkv310_keymap),
+};
+
+static struct samsung_keypad_platdata smdkv310_keypad_data __initdata = {
+ .keymap_data = &smdkv310_keymap_data,
+ .rows = 2,
+ .cols = 8,
+};
+
+static struct i2c_board_info i2c_devs1[] __initdata = {
+ {I2C_BOARD_INFO("wm8994", 0x1a),},
+};
+
+/* USB EHCI */
+static struct s5p_ehci_platdata smdkv310_ehci_pdata;
+
+static void __init smdkv310_ehci_init(void)
+{
+ struct s5p_ehci_platdata *pdata = &smdkv310_ehci_pdata;
+
+ s5p_ehci_set_platdata(pdata);
+}
+
+static struct platform_device *smdkv310_devices[] __initdata = {
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc1,
+ &s3c_device_hsmmc2,
+ &s3c_device_hsmmc3,
+ &s3c_device_i2c1,
+ &s5p_device_i2c_hdmiphy,
+ &s3c_device_rtc,
+ &s3c_device_wdt,
+ &s5p_device_ehci,
+ &s5p_device_fimc0,
+ &s5p_device_fimc1,
+ &s5p_device_fimc2,
+ &s5p_device_fimc3,
+ &exynos4_device_ac97,
+ &exynos4_device_i2s0,
+ &samsung_device_keypad,
+ &s5p_device_mfc,
+ &s5p_device_mfc_l,
+ &s5p_device_mfc_r,
+ &exynos4_device_pd[PD_MFC],
+ &exynos4_device_pd[PD_G3D],
+ &exynos4_device_pd[PD_LCD0],
+ &exynos4_device_pd[PD_LCD1],
+ &exynos4_device_pd[PD_CAM],
+ &exynos4_device_pd[PD_TV],
+ &exynos4_device_pd[PD_GPS],
+ &exynos4_device_spdif,
+ &exynos4_device_sysmmu,
+ &samsung_asoc_dma,
+ &samsung_asoc_idma,
+ &s5p_device_fimd0,
+ &smdkv310_lcd_lte480wv,
+ &smdkv310_smsc911x,
+ &exynos4_device_ahci,
+ &s5p_device_hdmi,
+ &s5p_device_mixer,
+};
+
+static void __init smdkv310_smsc911x_init(void)
+{
+ u32 cs1;
+
+ /* configure nCS1 width to 16 bits */
+ cs1 = __raw_readl(S5P_SROM_BW) &
+ ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
+ cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
+ (1 << S5P_SROM_BW__WAITENABLE__SHIFT) |
+ (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
+ S5P_SROM_BW__NCS1__SHIFT;
+ __raw_writel(cs1, S5P_SROM_BW);
+
+ /* set timing for nCS1 suitable for ethernet chip */
+ __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
+ (0x9 << S5P_SROM_BCX__TACP__SHIFT) |
+ (0xc << S5P_SROM_BCX__TCAH__SHIFT) |
+ (0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
+ (0x6 << S5P_SROM_BCX__TACC__SHIFT) |
+ (0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
+ (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
+}
+
+/* LCD Backlight data */
+static struct samsung_bl_gpio_info smdkv310_bl_gpio_info = {
+ .no = EXYNOS4_GPD0(1),
+ .func = S3C_GPIO_SFN(2),
+};
+
+static struct platform_pwm_backlight_data smdkv310_bl_data = {
+ .pwm_id = 1,
+ .pwm_period_ns = 1000,
+};
+
+static void s5p_tv_setup(void)
+{
+ /* direct HPD to HDMI chip */
+ WARN_ON(gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug"));
+ s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
+ s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
+
+ /* setup dependencies between TV devices */
+ s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
+ s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
+}
+
+static void __init smdkv310_map_io(void)
+{
+ s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s3c24xx_init_clocks(24000000);
+ s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
+}
+
+static void __init smdkv310_reserve(void)
+{
+ s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
+}
+
+static void __init smdkv310_machine_init(void)
+{
+ s3c_i2c1_set_platdata(NULL);
+ i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
+
+ smdkv310_smsc911x_init();
+
+ s3c_sdhci0_set_platdata(&smdkv310_hsmmc0_pdata);
+ s3c_sdhci1_set_platdata(&smdkv310_hsmmc1_pdata);
+ s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata);
+ s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata);
+
+ s5p_tv_setup();
+ s5p_i2c_hdmiphy_set_platdata(NULL);
+
+ samsung_keypad_set_platdata(&smdkv310_keypad_data);
+
+ samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
+ s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
+
+ smdkv310_ehci_init();
+ clk_xusbxti.rate = 24000000;
+
+ platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
+ s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
+}
+
+MACHINE_START(SMDKV310, "SMDKV310")
+ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+ /* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
+ .atag_offset = 0x100,
+ .init_irq = exynos4_init_irq,
+ .map_io = smdkv310_map_io,
+ .init_machine = smdkv310_machine_init,
+ .timer = &exynos4_timer,
+ .reserve = &smdkv310_reserve,
+MACHINE_END
+
+MACHINE_START(SMDKC210, "SMDKC210")
+ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+ .atag_offset = 0x100,
+ .init_irq = exynos4_init_irq,
+ .map_io = smdkv310_map_io,
+ .init_machine = smdkv310_machine_init,
+ .timer = &exynos4_timer,
+MACHINE_END
--- /dev/null
+/* linux/arch/arm/mach-exynos4/mach-universal_c210.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio.h>
+#include <linux/fb.h>
+#include <linux/mfd/max8998.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/max8952.h>
+#include <linux/mmc/host.h>
+#include <linux/i2c-gpio.h>
+#include <linux/i2c/mcs.h>
+#include <linux/i2c/atmel_mxt_ts.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/exynos4.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+#include <plat/fb.h>
+#include <plat/mfc.h>
+#include <plat/sdhci.h>
+#include <plat/pd.h>
+#include <plat/regs-fb-v4.h>
+#include <plat/fimc-core.h>
+#include <plat/camport.h>
+#include <plat/mipi_csis.h>
+
+#include <mach/map.h>
+
+#include <media/v4l2-mediabus.h>
+#include <media/s5p_fimc.h>
+#include <media/m5mols.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define UNIVERSAL_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define UNIVERSAL_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define UNIVERSAL_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S5PV210_UFCON_TXTRIG256 | \
+ S5PV210_UFCON_RXTRIG256)
+
+static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .ucon = UNIVERSAL_UCON_DEFAULT,
+ .ulcon = UNIVERSAL_ULCON_DEFAULT,
+ .ufcon = UNIVERSAL_UFCON_DEFAULT,
+ },
+ [1] = {
+ .hwport = 1,
+ .ucon = UNIVERSAL_UCON_DEFAULT,
+ .ulcon = UNIVERSAL_ULCON_DEFAULT,
+ .ufcon = UNIVERSAL_UFCON_DEFAULT,
+ },
+ [2] = {
+ .hwport = 2,
+ .ucon = UNIVERSAL_UCON_DEFAULT,
+ .ulcon = UNIVERSAL_ULCON_DEFAULT,
+ .ufcon = UNIVERSAL_UFCON_DEFAULT,
+ },
+ [3] = {
+ .hwport = 3,
+ .ucon = UNIVERSAL_UCON_DEFAULT,
+ .ulcon = UNIVERSAL_ULCON_DEFAULT,
+ .ufcon = UNIVERSAL_UFCON_DEFAULT,
+ },
+};
+
+static struct regulator_consumer_supply max8952_consumer =
+ REGULATOR_SUPPLY("vdd_arm", NULL);
+
+static struct max8952_platform_data universal_max8952_pdata __initdata = {
+ .gpio_vid0 = EXYNOS4_GPX0(3),
+ .gpio_vid1 = EXYNOS4_GPX0(4),
+ .gpio_en = -1, /* Not controllable, set "Always High" */
+ .default_mode = 0, /* vid0 = 0, vid1 = 0 */
+ .dvs_mode = { 48, 32, 28, 18 }, /* 1.25, 1.20, 1.05, 0.95V */
+ .sync_freq = 0, /* default: fastest */
+ .ramp_speed = 0, /* default: fastest */
+
+ .reg_data = {
+ .constraints = {
+ .name = "VARM_1.2V",
+ .min_uV = 770000,
+ .max_uV = 1400000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &max8952_consumer,
+ },
+};
+
+static struct regulator_consumer_supply lp3974_buck1_consumer =
+ REGULATOR_SUPPLY("vdd_int", NULL);
+
+static struct regulator_consumer_supply lp3974_buck2_consumer =
+ REGULATOR_SUPPLY("vddg3d", NULL);
+
+static struct regulator_consumer_supply lp3974_buck3_consumer =
+ REGULATOR_SUPPLY("vdet", "s5p-sdo");
+
+static struct regulator_init_data lp3974_buck1_data = {
+ .constraints = {
+ .name = "VINT_1.1V",
+ .min_uV = 750000,
+ .max_uV = 1500000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ .boot_on = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &lp3974_buck1_consumer,
+};
+
+static struct regulator_init_data lp3974_buck2_data = {
+ .constraints = {
+ .name = "VG3D_1.1V",
+ .min_uV = 750000,
+ .max_uV = 1500000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ .boot_on = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &lp3974_buck2_consumer,
+};
+
+static struct regulator_init_data lp3974_buck3_data = {
+ .constraints = {
+ .name = "VCC_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &lp3974_buck3_consumer,
+};
+
+static struct regulator_init_data lp3974_buck4_data = {
+ .constraints = {
+ .name = "VMEM_1.2V",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data lp3974_ldo2_data = {
+ .constraints = {
+ .name = "VALIVE_1.2V",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+};
+
+static struct regulator_consumer_supply lp3974_ldo3_consumer[] = {
+ REGULATOR_SUPPLY("vdd", "exynos4-hdmi"),
+ REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"),
+ REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"),
+};
+
+static struct regulator_init_data lp3974_ldo3_data = {
+ .constraints = {
+ .name = "VUSB+MIPI_1.1V",
+ .min_uV = 1100000,
+ .max_uV = 1100000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo3_consumer),
+ .consumer_supplies = lp3974_ldo3_consumer,
+};
+
+static struct regulator_consumer_supply lp3974_ldo4_consumer[] = {
+ REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"),
+};
+
+static struct regulator_init_data lp3974_ldo4_data = {
+ .constraints = {
+ .name = "VADC_3.3V",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo4_consumer),
+ .consumer_supplies = lp3974_ldo4_consumer,
+};
+
+static struct regulator_init_data lp3974_ldo5_data = {
+ .constraints = {
+ .name = "VTF_2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data lp3974_ldo6_data = {
+ .constraints = {
+ .name = "LDO6",
+ .min_uV = 2000000,
+ .max_uV = 2000000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_consumer_supply lp3974_ldo7_consumer[] = {
+ REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"),
+};
+
+static struct regulator_init_data lp3974_ldo7_data = {
+ .constraints = {
+ .name = "VLCD+VMIPI_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo7_consumer),
+ .consumer_supplies = lp3974_ldo7_consumer,
+};
+
+static struct regulator_consumer_supply lp3974_ldo8_consumer[] = {
+ REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"),
+};
+
+static struct regulator_init_data lp3974_ldo8_data = {
+ .constraints = {
+ .name = "VUSB+VDAC_3.3V",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo8_consumer),
+ .consumer_supplies = lp3974_ldo8_consumer,
+};
+
+static struct regulator_init_data lp3974_ldo9_data = {
+ .constraints = {
+ .name = "VCC_2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data lp3974_ldo10_data = {
+ .constraints = {
+ .name = "VPLL_1.1V",
+ .min_uV = 1100000,
+ .max_uV = 1100000,
+ .boot_on = 1,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_consumer_supply lp3974_ldo11_consumer =
+ REGULATOR_SUPPLY("dig_28", "0-001f");
+
+static struct regulator_init_data lp3974_ldo11_data = {
+ .constraints = {
+ .name = "CAM_AF_3.3V",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &lp3974_ldo11_consumer,
+};
+
+static struct regulator_init_data lp3974_ldo12_data = {
+ .constraints = {
+ .name = "PS_2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data lp3974_ldo13_data = {
+ .constraints = {
+ .name = "VHIC_1.2V",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_consumer_supply lp3974_ldo14_consumer =
+ REGULATOR_SUPPLY("dig_18", "0-001f");
+
+static struct regulator_init_data lp3974_ldo14_data = {
+ .constraints = {
+ .name = "CAM_I_HOST_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &lp3974_ldo14_consumer,
+};
+
+
+static struct regulator_consumer_supply lp3974_ldo15_consumer =
+ REGULATOR_SUPPLY("dig_12", "0-001f");
+
+static struct regulator_init_data lp3974_ldo15_data = {
+ .constraints = {
+ .name = "CAM_S_DIG+FM33_CORE_1.2V",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &lp3974_ldo15_consumer,
+};
+
+static struct regulator_consumer_supply lp3974_ldo16_consumer[] = {
+ REGULATOR_SUPPLY("a_sensor", "0-001f"),
+};
+
+static struct regulator_init_data lp3974_ldo16_data = {
+ .constraints = {
+ .name = "CAM_S_ANA_2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo16_consumer),
+ .consumer_supplies = lp3974_ldo16_consumer,
+};
+
+static struct regulator_init_data lp3974_ldo17_data = {
+ .constraints = {
+ .name = "VCC_3.0V_LCD",
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .boot_on = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data lp3974_32khz_ap_data = {
+ .constraints = {
+ .name = "32KHz AP",
+ .always_on = 1,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data lp3974_32khz_cp_data = {
+ .constraints = {
+ .name = "32KHz CP",
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data lp3974_vichg_data = {
+ .constraints = {
+ .name = "VICHG",
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data lp3974_esafeout1_data = {
+ .constraints = {
+ .name = "SAFEOUT1",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data lp3974_esafeout2_data = {
+ .constraints = {
+ .name = "SAFEOUT2",
+ .boot_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+};
+
+static struct max8998_regulator_data lp3974_regulators[] = {
+ { MAX8998_LDO2, &lp3974_ldo2_data },
+ { MAX8998_LDO3, &lp3974_ldo3_data },
+ { MAX8998_LDO4, &lp3974_ldo4_data },
+ { MAX8998_LDO5, &lp3974_ldo5_data },
+ { MAX8998_LDO6, &lp3974_ldo6_data },
+ { MAX8998_LDO7, &lp3974_ldo7_data },
+ { MAX8998_LDO8, &lp3974_ldo8_data },
+ { MAX8998_LDO9, &lp3974_ldo9_data },
+ { MAX8998_LDO10, &lp3974_ldo10_data },
+ { MAX8998_LDO11, &lp3974_ldo11_data },
+ { MAX8998_LDO12, &lp3974_ldo12_data },
+ { MAX8998_LDO13, &lp3974_ldo13_data },
+ { MAX8998_LDO14, &lp3974_ldo14_data },
+ { MAX8998_LDO15, &lp3974_ldo15_data },
+ { MAX8998_LDO16, &lp3974_ldo16_data },
+ { MAX8998_LDO17, &lp3974_ldo17_data },
+ { MAX8998_BUCK1, &lp3974_buck1_data },
+ { MAX8998_BUCK2, &lp3974_buck2_data },
+ { MAX8998_BUCK3, &lp3974_buck3_data },
+ { MAX8998_BUCK4, &lp3974_buck4_data },
+ { MAX8998_EN32KHZ_AP, &lp3974_32khz_ap_data },
+ { MAX8998_EN32KHZ_CP, &lp3974_32khz_cp_data },
+ { MAX8998_ENVICHG, &lp3974_vichg_data },
+ { MAX8998_ESAFEOUT1, &lp3974_esafeout1_data },
+ { MAX8998_ESAFEOUT2, &lp3974_esafeout2_data },
+};
+
+static struct max8998_platform_data universal_lp3974_pdata = {
+ .num_regulators = ARRAY_SIZE(lp3974_regulators),
+ .regulators = lp3974_regulators,
+ .buck1_voltage1 = 1100000, /* INT */
+ .buck1_voltage2 = 1000000,
+ .buck1_voltage3 = 1100000,
+ .buck1_voltage4 = 1000000,
+ .buck1_set1 = EXYNOS4_GPX0(5),
+ .buck1_set2 = EXYNOS4_GPX0(6),
+ .buck2_voltage1 = 1200000, /* G3D */
+ .buck2_voltage2 = 1100000,
+ .buck1_default_idx = 0,
+ .buck2_set3 = EXYNOS4_GPE2(0),
+ .buck2_default_idx = 0,
+ .wakeup = true,
+};
+
+
+enum fixed_regulator_id {
+ FIXED_REG_ID_MMC0,
+ FIXED_REG_ID_HDMI_5V,
+ FIXED_REG_ID_CAM_S_IF,
+ FIXED_REG_ID_CAM_I_CORE,
+ FIXED_REG_ID_CAM_VT_DIO,
+};
+
+static struct regulator_consumer_supply hdmi_fixed_consumer =
+ REGULATOR_SUPPLY("hdmi-en", "exynos4-hdmi");
+
+static struct regulator_init_data hdmi_fixed_voltage_init_data = {
+ .constraints = {
+ .name = "HDMI_5V",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &hdmi_fixed_consumer,
+};
+
+static struct fixed_voltage_config hdmi_fixed_voltage_config = {
+ .supply_name = "HDMI_EN1",
+ .microvolts = 5000000,
+ .gpio = EXYNOS4_GPE0(1),
+ .enable_high = true,
+ .init_data = &hdmi_fixed_voltage_init_data,
+};
+
+static struct platform_device hdmi_fixed_voltage = {
+ .name = "reg-fixed-voltage",
+ .id = FIXED_REG_ID_HDMI_5V,
+ .dev = {
+ .platform_data = &hdmi_fixed_voltage_config,
+ },
+};
+
+/* GPIO I2C 5 (PMIC) */
+static struct i2c_board_info i2c5_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("max8952", 0xC0 >> 1),
+ .platform_data = &universal_max8952_pdata,
+ }, {
+ I2C_BOARD_INFO("lp3974", 0xCC >> 1),
+ .platform_data = &universal_lp3974_pdata,
+ },
+};
+
+/* I2C3 (TSP) */
+static struct mxt_platform_data qt602240_platform_data = {
+ .x_line = 19,
+ .y_line = 11,
+ .x_size = 800,
+ .y_size = 480,
+ .blen = 0x11,
+ .threshold = 0x28,
+ .voltage = 2800000, /* 2.8V */
+ .orient = MXT_DIAGONAL,
+};
+
+static struct i2c_board_info i2c3_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("qt602240_ts", 0x4a),
+ .platform_data = &qt602240_platform_data,
+ },
+};
+
+static void __init universal_tsp_init(void)
+{
+ int gpio;
+
+ /* TSP_LDO_ON: XMDMADDR_11 */
+ gpio = EXYNOS4_GPE2(3);
+ gpio_request(gpio, "TSP_LDO_ON");
+ gpio_direction_output(gpio, 1);
+ gpio_export(gpio, 0);
+
+ /* TSP_INT: XMDMADDR_7 */
+ gpio = EXYNOS4_GPE1(7);
+ gpio_request(gpio, "TSP_INT");
+
+ s5p_register_gpio_interrupt(gpio);
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+ i2c3_devs[0].irq = gpio_to_irq(gpio);
+}
+
+
+/* GPIO I2C 12 (3 Touchkey) */
+static uint32_t touchkey_keymap[] = {
+ /* MCS_KEY_MAP(value, keycode) */
+ MCS_KEY_MAP(0, KEY_MENU), /* KEY_SEND */
+ MCS_KEY_MAP(1, KEY_BACK), /* KEY_END */
+};
+
+static struct mcs_platform_data touchkey_data = {
+ .keymap = touchkey_keymap,
+ .keymap_size = ARRAY_SIZE(touchkey_keymap),
+ .key_maxval = 2,
+};
+
+/* GPIO I2C 3_TOUCH 2.8V */
+#define I2C_GPIO_BUS_12 12
+static struct i2c_gpio_platform_data i2c_gpio12_data = {
+ .sda_pin = EXYNOS4_GPE4(0), /* XMDMDATA_8 */
+ .scl_pin = EXYNOS4_GPE4(1), /* XMDMDATA_9 */
+};
+
+static struct platform_device i2c_gpio12 = {
+ .name = "i2c-gpio",
+ .id = I2C_GPIO_BUS_12,
+ .dev = {
+ .platform_data = &i2c_gpio12_data,
+ },
+};
+
+static struct i2c_board_info i2c_gpio12_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("mcs5080_touchkey", 0x20),
+ .platform_data = &touchkey_data,
+ },
+};
+
+static void __init universal_touchkey_init(void)
+{
+ int gpio;
+
+ gpio = EXYNOS4_GPE3(7); /* XMDMDATA_7 */
+ gpio_request(gpio, "3_TOUCH_INT");
+ s5p_register_gpio_interrupt(gpio);
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
+ i2c_gpio12_devs[0].irq = gpio_to_irq(gpio);
+
+ gpio = EXYNOS4_GPE3(3); /* XMDMDATA_3 */
+ gpio_request(gpio, "3_TOUCH_EN");
+ gpio_direction_output(gpio, 1);
+}
+
+static struct s3c2410_platform_i2c universal_i2c0_platdata __initdata = {
+ .frequency = 300 * 1000,
+ .sda_delay = 200,
+};
+
+/* GPIO KEYS */
+static struct gpio_keys_button universal_gpio_keys_tables[] = {
+ {
+ .code = KEY_VOLUMEUP,
+ .gpio = EXYNOS4_GPX2(0), /* XEINT16 */
+ .desc = "gpio-keys: KEY_VOLUMEUP",
+ .type = EV_KEY,
+ .active_low = 1,
+ .debounce_interval = 1,
+ }, {
+ .code = KEY_VOLUMEDOWN,
+ .gpio = EXYNOS4_GPX2(1), /* XEINT17 */
+ .desc = "gpio-keys: KEY_VOLUMEDOWN",
+ .type = EV_KEY,
+ .active_low = 1,
+ .debounce_interval = 1,
+ }, {
+ .code = KEY_CONFIG,
+ .gpio = EXYNOS4_GPX2(2), /* XEINT18 */
+ .desc = "gpio-keys: KEY_CONFIG",
+ .type = EV_KEY,
+ .active_low = 1,
+ .debounce_interval = 1,
+ }, {
+ .code = KEY_CAMERA,
+ .gpio = EXYNOS4_GPX2(3), /* XEINT19 */
+ .desc = "gpio-keys: KEY_CAMERA",
+ .type = EV_KEY,
+ .active_low = 1,
+ .debounce_interval = 1,
+ }, {
+ .code = KEY_OK,
+ .gpio = EXYNOS4_GPX3(5), /* XEINT29 */
+ .desc = "gpio-keys: KEY_OK",
+ .type = EV_KEY,
+ .active_low = 1,
+ .debounce_interval = 1,
+ },
+};
+
+static struct gpio_keys_platform_data universal_gpio_keys_data = {
+ .buttons = universal_gpio_keys_tables,
+ .nbuttons = ARRAY_SIZE(universal_gpio_keys_tables),
+};
+
+static struct platform_device universal_gpio_keys = {
+ .name = "gpio-keys",
+ .dev = {
+ .platform_data = &universal_gpio_keys_data,
+ },
+};
+
+/* eMMC */
+static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = {
+ .max_width = 8,
+ .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
+ MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
+ MMC_CAP_DISABLE),
+ .cd_type = S3C_SDHCI_CD_PERMANENT,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct regulator_consumer_supply mmc0_supplies[] = {
+ REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
+};
+
+static struct regulator_init_data mmc0_fixed_voltage_init_data = {
+ .constraints = {
+ .name = "VMEM_VDD_2.8V",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(mmc0_supplies),
+ .consumer_supplies = mmc0_supplies,
+};
+
+static struct fixed_voltage_config mmc0_fixed_voltage_config = {
+ .supply_name = "MASSMEMORY_EN",
+ .microvolts = 2800000,
+ .gpio = EXYNOS4_GPE1(3),
+ .enable_high = true,
+ .init_data = &mmc0_fixed_voltage_init_data,
+};
+
+static struct platform_device mmc0_fixed_voltage = {
+ .name = "reg-fixed-voltage",
+ .id = FIXED_REG_ID_MMC0,
+ .dev = {
+ .platform_data = &mmc0_fixed_voltage_config,
+ },
+};
+
+/* SD */
+static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = {
+ .max_width = 4,
+ .host_caps = MMC_CAP_4_BIT_DATA |
+ MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
+ MMC_CAP_DISABLE,
+ .ext_cd_gpio = EXYNOS4_GPX3(4), /* XEINT_28 */
+ .ext_cd_gpio_invert = 1,
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+/* WiFi */
+static struct s3c_sdhci_platdata universal_hsmmc3_data __initdata = {
+ .max_width = 4,
+ .host_caps = MMC_CAP_4_BIT_DATA |
+ MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
+ MMC_CAP_DISABLE,
+ .cd_type = S3C_SDHCI_CD_EXTERNAL,
+};
+
+static void __init universal_sdhci_init(void)
+{
+ s3c_sdhci0_set_platdata(&universal_hsmmc0_data);
+ s3c_sdhci2_set_platdata(&universal_hsmmc2_data);
+ s3c_sdhci3_set_platdata(&universal_hsmmc3_data);
+}
+
+/* I2C1 */
+static struct i2c_board_info i2c1_devs[] __initdata = {
+ /* Gyro, To be updated */
+};
+
+/* Frame Buffer */
+static struct s3c_fb_pd_win universal_fb_win0 = {
+ .win_mode = {
+ .left_margin = 16,
+ .right_margin = 16,
+ .upper_margin = 2,
+ .lower_margin = 28,
+ .hsync_len = 2,
+ .vsync_len = 1,
+ .xres = 480,
+ .yres = 800,
+ .refresh = 55,
+ },
+ .max_bpp = 32,
+ .default_bpp = 16,
+};
+
+static struct s3c_fb_platdata universal_lcd_pdata __initdata = {
+ .win[0] = &universal_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
+ VIDCON0_CLKSEL_LCD,
+ .vidcon1 = VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
+ | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
+};
+
+static struct regulator_consumer_supply cam_i_core_supply =
+ REGULATOR_SUPPLY("core", "0-001f");
+
+static struct regulator_init_data cam_i_core_reg_init_data = {
+ .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &cam_i_core_supply,
+};
+
+static struct fixed_voltage_config cam_i_core_fixed_voltage_cfg = {
+ .supply_name = "CAM_I_CORE_1.2V",
+ .microvolts = 1200000,
+ .gpio = EXYNOS4_GPE2(2), /* CAM_8M_CORE_EN */
+ .enable_high = 1,
+ .init_data = &cam_i_core_reg_init_data,
+};
+
+static struct platform_device cam_i_core_fixed_reg_dev = {
+ .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_I_CORE,
+ .dev = { .platform_data = &cam_i_core_fixed_voltage_cfg },
+};
+
+static struct regulator_consumer_supply cam_s_if_supply =
+ REGULATOR_SUPPLY("d_sensor", "0-001f");
+
+static struct regulator_init_data cam_s_if_reg_init_data = {
+ .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &cam_s_if_supply,
+};
+
+static struct fixed_voltage_config cam_s_if_fixed_voltage_cfg = {
+ .supply_name = "CAM_S_IF_1.8V",
+ .microvolts = 1800000,
+ .gpio = EXYNOS4_GPE3(0), /* CAM_PWR_EN1 */
+ .enable_high = 1,
+ .init_data = &cam_s_if_reg_init_data,
+};
+
+static struct platform_device cam_s_if_fixed_reg_dev = {
+ .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_S_IF,
+ .dev = { .platform_data = &cam_s_if_fixed_voltage_cfg },
+};
+
+static struct s5p_platform_mipi_csis mipi_csis_platdata = {
+ .clk_rate = 166000000UL,
+ .lanes = 2,
+ .alignment = 32,
+ .hs_settle = 12,
+ .phy_enable = s5p_csis_phy_enable,
+};
+
+#define GPIO_CAM_LEVEL_EN(n) EXYNOS4_GPE4(n + 3)
+#define GPIO_CAM_8M_ISP_INT EXYNOS4_GPX1(5) /* XEINT_13 */
+#define GPIO_CAM_MEGA_nRST EXYNOS4_GPE2(5)
+
+static int m5mols_set_power(struct device *dev, int on)
+{
+ gpio_set_value(GPIO_CAM_LEVEL_EN(1), !on);
+ gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on);
+ return 0;
+}
+
+static struct m5mols_platform_data m5mols_platdata = {
+ .gpio_reset = GPIO_CAM_MEGA_nRST,
+ .reset_polarity = 0,
+ .set_power = m5mols_set_power,
+};
+
+static struct i2c_board_info m5mols_board_info = {
+ I2C_BOARD_INFO("M5MOLS", 0x1F),
+ .platform_data = &m5mols_platdata,
+};
+
+static struct s5p_fimc_isp_info universal_camera_sensors[] = {
+ {
+ .mux_id = 0,
+ .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
+ V4L2_MBUS_VSYNC_ACTIVE_LOW,
+ .bus_type = FIMC_MIPI_CSI2,
+ .board_info = &m5mols_board_info,
+ .i2c_bus_num = 0,
+ .clk_frequency = 21600000UL,
+ .csi_data_align = 32,
+ },
+};
+
+static struct s5p_platform_fimc fimc_md_platdata = {
+ .isp_info = universal_camera_sensors,
+ .num_clients = ARRAY_SIZE(universal_camera_sensors),
+};
+
+static struct gpio universal_camera_gpios[] = {
+ { GPIO_CAM_LEVEL_EN(1), GPIOF_OUT_INIT_HIGH, "CAM_LVL_EN1" },
+ { GPIO_CAM_LEVEL_EN(2), GPIOF_OUT_INIT_LOW, "CAM_LVL_EN2" },
+ { GPIO_CAM_8M_ISP_INT, GPIOF_IN, "8M_ISP_INT" },
+ { GPIO_CAM_MEGA_nRST, GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" },
+};
+
+static void universal_camera_init(void)
+{
+ s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
+ &s5p_device_mipi_csis0);
+ s3c_set_platdata(&fimc_md_platdata, sizeof(fimc_md_platdata),
+ &s5p_device_fimc_md);
+
+ if (gpio_request_array(universal_camera_gpios,
+ ARRAY_SIZE(universal_camera_gpios))) {
+ pr_err("%s: GPIO request failed\n", __func__);
+ return;
+ }
+
+ if (!s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xf)))
+ m5mols_board_info.irq = gpio_to_irq(GPIO_CAM_8M_ISP_INT);
+ else
+ pr_err("Failed to configure 8M_ISP_INT GPIO\n");
+
+ /* Free GPIOs controlled directly by the sensor drivers. */
+ gpio_free(GPIO_CAM_MEGA_nRST);
+ gpio_free(GPIO_CAM_8M_ISP_INT);
+
+ if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A))
+ pr_err("Camera port A setup failed\n");
+}
+
+static struct platform_device *universal_devices[] __initdata = {
+ /* Samsung Platform Devices */
+ &s5p_device_mipi_csis0,
+ &s5p_device_fimc0,
+ &s5p_device_fimc1,
+ &s5p_device_fimc2,
+ &s5p_device_fimc3,
+ &mmc0_fixed_voltage,
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc2,
+ &s3c_device_hsmmc3,
+ &s3c_device_i2c0,
+ &s3c_device_i2c3,
+ &s3c_device_i2c5,
+ &s5p_device_i2c_hdmiphy,
+ &hdmi_fixed_voltage,
+ &exynos4_device_pd[PD_TV],
+ &s5p_device_hdmi,
+ &s5p_device_sdo,
+ &s5p_device_mixer,
+
+ /* Universal Devices */
+ &i2c_gpio12,
+ &universal_gpio_keys,
+ &s5p_device_onenand,
+ &s5p_device_fimd0,
+ &s5p_device_mfc,
+ &s5p_device_mfc_l,
+ &s5p_device_mfc_r,
+ &exynos4_device_pd[PD_MFC],
+ &exynos4_device_pd[PD_LCD0],
+ &exynos4_device_pd[PD_CAM],
+ &cam_i_core_fixed_reg_dev,
+ &cam_s_if_fixed_reg_dev,
+ &s5p_device_fimc_md,
+};
+
+static void __init universal_map_io(void)
+{
+ s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s3c24xx_init_clocks(24000000);
+ s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
+}
+
+void s5p_tv_setup(void)
+{
+ /* direct HPD to HDMI chip */
+ gpio_request(EXYNOS4_GPX3(7), "hpd-plug");
+
+ gpio_direction_input(EXYNOS4_GPX3(7));
+ s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
+ s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
+
+ /* setup dependencies between TV devices */
+ s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
+ s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
+}
+
+static void __init universal_reserve(void)
+{
+ s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
+}
+
+static void __init universal_machine_init(void)
+{
+ universal_sdhci_init();
+ s5p_tv_setup();
+
+ s3c_i2c0_set_platdata(&universal_i2c0_platdata);
+ i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
+
+ universal_tsp_init();
+ s3c_i2c3_set_platdata(NULL);
+ i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
+
+ s3c_i2c5_set_platdata(NULL);
+ s5p_i2c_hdmiphy_set_platdata(NULL);
+ i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
+
+ s5p_fimd0_set_platdata(&universal_lcd_pdata);
+
+ universal_touchkey_init();
+ i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs,
+ ARRAY_SIZE(i2c_gpio12_devs));
+
+ universal_camera_init();
+
+ /* Last */
+ platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
+
+ s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
+ s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
+
+ s5p_device_fimc0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+ s5p_device_fimc1.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+ s5p_device_fimc2.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+ s5p_device_fimc3.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+ s5p_device_mipi_csis0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+}
+
+MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
+ /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
+ .atag_offset = 0x100,
+ .init_irq = exynos4_init_irq,
+ .map_io = universal_map_io,
+ .init_machine = universal_machine_init,
+ .timer = &exynos4_timer,
+ .reserve = &universal_reserve,
+MACHINE_END
--- /dev/null
+/* linux/arch/arm/mach-exynos4/mct.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4 MCT(Multi-Core Timer) support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/percpu.h>
+
+#include <asm/hardware/gic.h>
+
+#include <plat/cpu.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+#include <mach/regs-mct.h>
+#include <asm/mach/time.h>
+
+enum {
+ MCT_INT_SPI,
+ MCT_INT_PPI
+};
+
+static unsigned long clk_cnt_per_tick;
+static unsigned long clk_rate;
+static unsigned int mct_int_type;
+
+struct mct_clock_event_device {
+ struct clock_event_device *evt;
+ void __iomem *base;
+ char name[10];
+};
+
+static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick);
+
+static void exynos4_mct_write(unsigned int value, void *addr)
+{
+ void __iomem *stat_addr;
+ u32 mask;
+ u32 i;
+
+ __raw_writel(value, addr);
+
+ if (likely(addr >= EXYNOS4_MCT_L_BASE(0))) {
+ u32 base = (u32) addr & EXYNOS4_MCT_L_MASK;
+ switch ((u32) addr & ~EXYNOS4_MCT_L_MASK) {
+ case (u32) MCT_L_TCON_OFFSET:
+ stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+ mask = 1 << 3; /* L_TCON write status */
+ break;
+ case (u32) MCT_L_ICNTB_OFFSET:
+ stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+ mask = 1 << 1; /* L_ICNTB write status */
+ break;
+ case (u32) MCT_L_TCNTB_OFFSET:
+ stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+ mask = 1 << 0; /* L_TCNTB write status */
+ break;
+ default:
+ return;
+ }
+ } else {
+ switch ((u32) addr) {
+ case (u32) EXYNOS4_MCT_G_TCON:
+ stat_addr = EXYNOS4_MCT_G_WSTAT;
+ mask = 1 << 16; /* G_TCON write status */
+ break;
+ case (u32) EXYNOS4_MCT_G_COMP0_L:
+ stat_addr = EXYNOS4_MCT_G_WSTAT;
+ mask = 1 << 0; /* G_COMP0_L write status */
+ break;
+ case (u32) EXYNOS4_MCT_G_COMP0_U:
+ stat_addr = EXYNOS4_MCT_G_WSTAT;
+ mask = 1 << 1; /* G_COMP0_U write status */
+ break;
+ case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR:
+ stat_addr = EXYNOS4_MCT_G_WSTAT;
+ mask = 1 << 2; /* G_COMP0_ADD_INCR w status */
+ break;
+ case (u32) EXYNOS4_MCT_G_CNT_L:
+ stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
+ mask = 1 << 0; /* G_CNT_L write status */
+ break;
+ case (u32) EXYNOS4_MCT_G_CNT_U:
+ stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
+ mask = 1 << 1; /* G_CNT_U write status */
+ break;
+ default:
+ return;
+ }
+ }
+
+ /* Wait maximum 1 ms until written values are applied */
+ for (i = 0; i < loops_per_jiffy / 1000 * HZ; i++)
+ if (__raw_readl(stat_addr) & mask) {
+ __raw_writel(mask, stat_addr);
+ return;
+ }
+
+ panic("MCT hangs after writing %d (addr:0x%08x)\n", value, (u32)addr);
+}
+
+/* Clocksource handling */
+static void exynos4_mct_frc_start(u32 hi, u32 lo)
+{
+ u32 reg;
+
+ exynos4_mct_write(lo, EXYNOS4_MCT_G_CNT_L);
+ exynos4_mct_write(hi, EXYNOS4_MCT_G_CNT_U);
+
+ reg = __raw_readl(EXYNOS4_MCT_G_TCON);
+ reg |= MCT_G_TCON_START;
+ exynos4_mct_write(reg, EXYNOS4_MCT_G_TCON);
+}
+
+static cycle_t exynos4_frc_read(struct clocksource *cs)
+{
+ unsigned int lo, hi;
+ u32 hi2 = __raw_readl(EXYNOS4_MCT_G_CNT_U);
+
+ do {
+ hi = hi2;
+ lo = __raw_readl(EXYNOS4_MCT_G_CNT_L);
+ hi2 = __raw_readl(EXYNOS4_MCT_G_CNT_U);
+ } while (hi != hi2);
+
+ return ((cycle_t)hi << 32) | lo;
+}
+
+static void exynos4_frc_resume(struct clocksource *cs)
+{
+ exynos4_mct_frc_start(0, 0);
+}
+
+struct clocksource mct_frc = {
+ .name = "mct-frc",
+ .rating = 400,
+ .read = exynos4_frc_read,
+ .mask = CLOCKSOURCE_MASK(64),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .resume = exynos4_frc_resume,
+};
+
+static void __init exynos4_clocksource_init(void)
+{
+ exynos4_mct_frc_start(0, 0);
+
+ if (clocksource_register_hz(&mct_frc, clk_rate))
+ panic("%s: can't register clocksource\n", mct_frc.name);
+}
+
+static void exynos4_mct_comp0_stop(void)
+{
+ unsigned int tcon;
+
+ tcon = __raw_readl(EXYNOS4_MCT_G_TCON);
+ tcon &= ~(MCT_G_TCON_COMP0_ENABLE | MCT_G_TCON_COMP0_AUTO_INC);
+
+ exynos4_mct_write(tcon, EXYNOS4_MCT_G_TCON);
+ exynos4_mct_write(0, EXYNOS4_MCT_G_INT_ENB);
+}
+
+static void exynos4_mct_comp0_start(enum clock_event_mode mode,
+ unsigned long cycles)
+{
+ unsigned int tcon;
+ cycle_t comp_cycle;
+
+ tcon = __raw_readl(EXYNOS4_MCT_G_TCON);
+
+ if (mode == CLOCK_EVT_MODE_PERIODIC) {
+ tcon |= MCT_G_TCON_COMP0_AUTO_INC;
+ exynos4_mct_write(cycles, EXYNOS4_MCT_G_COMP0_ADD_INCR);
+ }
+
+ comp_cycle = exynos4_frc_read(&mct_frc) + cycles;
+ exynos4_mct_write((u32)comp_cycle, EXYNOS4_MCT_G_COMP0_L);
+ exynos4_mct_write((u32)(comp_cycle >> 32), EXYNOS4_MCT_G_COMP0_U);
+
+ exynos4_mct_write(0x1, EXYNOS4_MCT_G_INT_ENB);
+
+ tcon |= MCT_G_TCON_COMP0_ENABLE;
+ exynos4_mct_write(tcon , EXYNOS4_MCT_G_TCON);
+}
+
+static int exynos4_comp_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ exynos4_mct_comp0_start(evt->mode, cycles);
+
+ return 0;
+}
+
+static void exynos4_comp_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ exynos4_mct_comp0_stop();
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ exynos4_mct_comp0_start(mode, clk_cnt_per_tick);
+ break;
+
+ case CLOCK_EVT_MODE_ONESHOT:
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_RESUME:
+ break;
+ }
+}
+
+static struct clock_event_device mct_comp_device = {
+ .name = "mct-comp",
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 250,
+ .set_next_event = exynos4_comp_set_next_event,
+ .set_mode = exynos4_comp_set_mode,
+};
+
+static irqreturn_t exynos4_mct_comp_isr(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ exynos4_mct_write(0x1, EXYNOS4_MCT_G_INT_CSTAT);
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction mct_comp_event_irq = {
+ .name = "mct_comp_irq",
+ .flags = IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = exynos4_mct_comp_isr,
+ .dev_id = &mct_comp_device,
+};
+
+static void exynos4_clockevent_init(void)
+{
+ clk_cnt_per_tick = clk_rate / 2 / HZ;
+
+ clockevents_calc_mult_shift(&mct_comp_device, clk_rate / 2, 5);
+ mct_comp_device.max_delta_ns =
+ clockevent_delta2ns(0xffffffff, &mct_comp_device);
+ mct_comp_device.min_delta_ns =
+ clockevent_delta2ns(0xf, &mct_comp_device);
+ mct_comp_device.cpumask = cpumask_of(0);
+ clockevents_register_device(&mct_comp_device);
+
+ setup_irq(IRQ_MCT_G0, &mct_comp_event_irq);
+}
+
+#ifdef CONFIG_LOCAL_TIMERS
+/* Clock event handling */
+static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt)
+{
+ unsigned long tmp;
+ unsigned long mask = MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START;
+ void __iomem *addr = mevt->base + MCT_L_TCON_OFFSET;
+
+ tmp = __raw_readl(addr);
+ if (tmp & mask) {
+ tmp &= ~mask;
+ exynos4_mct_write(tmp, addr);
+ }
+}
+
+static void exynos4_mct_tick_start(unsigned long cycles,
+ struct mct_clock_event_device *mevt)
+{
+ unsigned long tmp;
+
+ exynos4_mct_tick_stop(mevt);
+
+ tmp = (1 << 31) | cycles; /* MCT_L_UPDATE_ICNTB */
+
+ /* update interrupt count buffer */
+ exynos4_mct_write(tmp, mevt->base + MCT_L_ICNTB_OFFSET);
+
+ /* enable MCT tick interrupt */
+ exynos4_mct_write(0x1, mevt->base + MCT_L_INT_ENB_OFFSET);
+
+ tmp = __raw_readl(mevt->base + MCT_L_TCON_OFFSET);
+ tmp |= MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START |
+ MCT_L_TCON_INTERVAL_MODE;
+ exynos4_mct_write(tmp, mevt->base + MCT_L_TCON_OFFSET);
+}
+
+static int exynos4_tick_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ struct mct_clock_event_device *mevt = this_cpu_ptr(&percpu_mct_tick);
+
+ exynos4_mct_tick_start(cycles, mevt);
+
+ return 0;
+}
+
+static inline void exynos4_tick_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ struct mct_clock_event_device *mevt = this_cpu_ptr(&percpu_mct_tick);
+
+ exynos4_mct_tick_stop(mevt);
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ exynos4_mct_tick_start(clk_cnt_per_tick, mevt);
+ break;
+
+ case CLOCK_EVT_MODE_ONESHOT:
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_RESUME:
+ break;
+ }
+}
+
+static int exynos4_mct_tick_clear(struct mct_clock_event_device *mevt)
+{
+ struct clock_event_device *evt = mevt->evt;
+
+ /*
+ * This is for supporting oneshot mode.
+ * Mct would generate interrupt periodically
+ * without explicit stopping.
+ */
+ if (evt->mode != CLOCK_EVT_MODE_PERIODIC)
+ exynos4_mct_tick_stop(mevt);
+
+ /* Clear the MCT tick interrupt */
+ if (__raw_readl(mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) {
+ exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
+static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
+{
+ struct mct_clock_event_device *mevt = dev_id;
+ struct clock_event_device *evt = mevt->evt;
+
+ exynos4_mct_tick_clear(mevt);
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction mct_tick0_event_irq = {
+ .name = "mct_tick0_irq",
+ .flags = IRQF_TIMER | IRQF_NOBALANCING,
+ .handler = exynos4_mct_tick_isr,
+};
+
+static struct irqaction mct_tick1_event_irq = {
+ .name = "mct_tick1_irq",
+ .flags = IRQF_TIMER | IRQF_NOBALANCING,
+ .handler = exynos4_mct_tick_isr,
+};
+
+static void exynos4_mct_tick_init(struct clock_event_device *evt)
+{
+ struct mct_clock_event_device *mevt;
+ unsigned int cpu = smp_processor_id();
+
+ mevt = this_cpu_ptr(&percpu_mct_tick);
+ mevt->evt = evt;
+
+ mevt->base = EXYNOS4_MCT_L_BASE(cpu);
+ sprintf(mevt->name, "mct_tick%d", cpu);
+
+ evt->name = mevt->name;
+ evt->cpumask = cpumask_of(cpu);
+ evt->set_next_event = exynos4_tick_set_next_event;
+ evt->set_mode = exynos4_tick_set_mode;
+ evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+ evt->rating = 450;
+
+ clockevents_calc_mult_shift(evt, clk_rate / 2, 5);
+ evt->max_delta_ns =
+ clockevent_delta2ns(0x7fffffff, evt);
+ evt->min_delta_ns =
+ clockevent_delta2ns(0xf, evt);
+
+ clockevents_register_device(evt);
+
+ exynos4_mct_write(0x1, mevt->base + MCT_L_TCNTB_OFFSET);
+
+ if (mct_int_type == MCT_INT_SPI) {
+ if (cpu == 0) {
+ mct_tick0_event_irq.dev_id = mevt;
+ evt->irq = IRQ_MCT_L0;
+ setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq);
+ } else {
+ mct_tick1_event_irq.dev_id = mevt;
+ evt->irq = IRQ_MCT_L1;
+ setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
+ irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
+ }
+ } else {
+ enable_percpu_irq(IRQ_MCT_LOCALTIMER, 0);
+ }
+}
+
+/* Setup the local clock events for a CPU */
+int __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+ exynos4_mct_tick_init(evt);
+
+ return 0;
+}
+
+void local_timer_stop(struct clock_event_device *evt)
+{
+ evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
+ if (mct_int_type == MCT_INT_SPI)
+ disable_irq(evt->irq);
+ else
+ disable_percpu_irq(IRQ_MCT_LOCALTIMER);
+}
+#endif /* CONFIG_LOCAL_TIMERS */
+
+static void __init exynos4_timer_resources(void)
+{
+ struct clk *mct_clk;
+ mct_clk = clk_get(NULL, "xtal");
+
+ clk_rate = clk_get_rate(mct_clk);
+
+ if (mct_int_type == MCT_INT_PPI) {
+ int err;
+
+ err = request_percpu_irq(IRQ_MCT_LOCALTIMER,
+ exynos4_mct_tick_isr, "MCT",
+ &percpu_mct_tick);
+ WARN(err, "MCT: can't request IRQ %d (%d)\n",
+ IRQ_MCT_LOCALTIMER, err);
+ }
+}
+
+static void __init exynos4_timer_init(void)
+{
+ if (soc_is_exynos4210())
+ mct_int_type = MCT_INT_SPI;
+ else
+ mct_int_type = MCT_INT_PPI;
+
+ exynos4_timer_resources();
+ exynos4_clocksource_init();
+ exynos4_clockevent_init();
+}
+
+struct sys_timer exynos4_timer = {
+ .init = exynos4_timer_init,
+};
--- /dev/null
+/* linux/arch/arm/mach-exynos4/platsmp.c
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Cloned from linux/arch/arm/mach-vexpress/platsmp.c
+ *
+ * Copyright (C) 2002 ARM Ltd.
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+#include <asm/hardware/gic.h>
+#include <asm/smp_scu.h>
+#include <asm/unified.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-pmu.h>
+
+#include <plat/cpu.h>
+
+extern unsigned int gic_bank_offset;
+extern void exynos4_secondary_startup(void);
+
+#define CPU1_BOOT_REG (samsung_rev() == EXYNOS4210_REV_1_1 ? \
+ S5P_INFORM5 : S5P_VA_SYSRAM)
+
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+
+volatile int __cpuinitdata pen_release = -1;
+
+/*
+ * Write pen_release in a way that is guaranteed to be visible to all
+ * observers, irrespective of whether they're taking part in coherency
+ * or not. This is necessary for the hotplug code to work reliably.
+ */
+static void write_pen_release(int val)
+{
+ pen_release = val;
+ smp_wmb();
+ __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
+ outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+}
+
+static void __iomem *scu_base_addr(void)
+{
+ return (void __iomem *)(S5P_VA_SCU);
+}
+
+static DEFINE_SPINLOCK(boot_lock);
+
+static void __cpuinit exynos4_gic_secondary_init(void)
+{
+ void __iomem *dist_base = S5P_VA_GIC_DIST +
+ (gic_bank_offset * smp_processor_id());
+ void __iomem *cpu_base = S5P_VA_GIC_CPU +
+ (gic_bank_offset * smp_processor_id());
+ int i;
+
+ /*
+ * Deal with the banked PPI and SGI interrupts - disable all
+ * PPI interrupts, ensure all SGI interrupts are enabled.
+ */
+ __raw_writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
+ __raw_writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
+
+ /*
+ * Set priority on PPI and SGI interrupts
+ */
+ for (i = 0; i < 32; i += 4)
+ __raw_writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
+
+ __raw_writel(0xf0, cpu_base + GIC_CPU_PRIMASK);
+ __raw_writel(1, cpu_base + GIC_CPU_CTRL);
+}
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+ /*
+ * if any interrupts are already enabled for the primary
+ * core (e.g. timer irq), then they will not have been enabled
+ * for us: do so
+ */
+ exynos4_gic_secondary_init();
+
+ /*
+ * let the primary processor know we're out of the
+ * pen, then head off into the C entry point
+ */
+ write_pen_release(-1);
+
+ /*
+ * Synchronise with the boot thread.
+ */
+ spin_lock(&boot_lock);
+ spin_unlock(&boot_lock);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ unsigned long timeout;
+
+ /*
+ * Set synchronisation state between this boot processor
+ * and the secondary one
+ */
+ spin_lock(&boot_lock);
+
+ /*
+ * The secondary processor is waiting to be released from
+ * the holding pen - release it, then wait for it to flag
+ * that it has been released by resetting pen_release.
+ *
+ * Note that "pen_release" is the hardware CPU ID, whereas
+ * "cpu" is Linux's internal ID.
+ */
+ write_pen_release(cpu_logical_map(cpu));
+
+ if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) {
+ __raw_writel(S5P_CORE_LOCAL_PWR_EN,
+ S5P_ARM_CORE1_CONFIGURATION);
+
+ timeout = 10;
+
+ /* wait max 10 ms until cpu1 is on */
+ while ((__raw_readl(S5P_ARM_CORE1_STATUS)
+ & S5P_CORE_LOCAL_PWR_EN) != S5P_CORE_LOCAL_PWR_EN) {
+ if (timeout-- == 0)
+ break;
+
+ mdelay(1);
+ }
+
+ if (timeout == 0) {
+ printk(KERN_ERR "cpu1 power enable failed");
+ spin_unlock(&boot_lock);
+ return -ETIMEDOUT;
+ }
+ }
+ /*
+ * Send the secondary CPU a soft interrupt, thereby causing
+ * the boot monitor to read the system wide flags register,
+ * and branch to the address found there.
+ */
+
+ timeout = jiffies + (1 * HZ);
+ while (time_before(jiffies, timeout)) {
+ smp_rmb();
+
+ __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)),
+ CPU1_BOOT_REG);
+ gic_raise_softirq(cpumask_of(cpu), 1);
+
+ if (pen_release == -1)
+ break;
+
+ udelay(10);
+ }
+
+ /*
+ * now the secondary core is starting up let it run its
+ * calibrations, then wait for it to finish
+ */
+ spin_unlock(&boot_lock);
+
+ return pen_release != -1 ? -ENOSYS : 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+
+void __init smp_init_cpus(void)
+{
+ void __iomem *scu_base = scu_base_addr();
+ unsigned int i, ncores;
+
+ ncores = scu_base ? scu_get_core_count(scu_base) : 1;
+
+ /* sanity check */
+ if (ncores > nr_cpu_ids) {
+ pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+ ncores, nr_cpu_ids);
+ ncores = nr_cpu_ids;
+ }
+
+ for (i = 0; i < ncores; i++)
+ set_cpu_possible(i, true);
+
+ set_smp_cross_call(gic_raise_softirq);
+}
+
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+{
+
+ scu_enable(scu_base_addr());
+
+ /*
+ * Write the address of secondary startup into the
+ * system-wide flags register. The boot monitor waits
+ * until it receives a soft interrupt, and then the
+ * secondary CPU branches to this address.
+ */
+ __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)),
+ CPU1_BOOT_REG);
+}
--- /dev/null
+/* linux/arch/arm/mach-exynos4/pm.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4210 - Power Management support
+ *
+ * Based on arch/arm/mach-s3c2410/pm.c
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/syscore_ops.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+
+#include <asm/cacheflush.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/pll.h>
+#include <plat/regs-srom.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-pmu.h>
+#include <mach/pm-core.h>
+#include <mach/pmu.h>
+
+static struct sleep_save exynos4_set_clksrc[] = {
+ { .reg = S5P_CLKSRC_MASK_TOP , .val = 0x00000001, },
+ { .reg = S5P_CLKSRC_MASK_CAM , .val = 0x11111111, },
+ { .reg = S5P_CLKSRC_MASK_TV , .val = 0x00000111, },
+ { .reg = S5P_CLKSRC_MASK_LCD0 , .val = 0x00001111, },
+ { .reg = S5P_CLKSRC_MASK_MAUDIO , .val = 0x00000001, },
+ { .reg = S5P_CLKSRC_MASK_FSYS , .val = 0x01011111, },
+ { .reg = S5P_CLKSRC_MASK_PERIL0 , .val = 0x01111111, },
+ { .reg = S5P_CLKSRC_MASK_PERIL1 , .val = 0x01110111, },
+ { .reg = S5P_CLKSRC_MASK_DMC , .val = 0x00010000, },
+};
+
+static struct sleep_save exynos4210_set_clksrc[] = {
+ { .reg = S5P_CLKSRC_MASK_LCD1 , .val = 0x00001111, },
+};
+
+static struct sleep_save exynos4_epll_save[] = {
+ SAVE_ITEM(S5P_EPLL_CON0),
+ SAVE_ITEM(S5P_EPLL_CON1),
+};
+
+static struct sleep_save exynos4_vpll_save[] = {
+ SAVE_ITEM(S5P_VPLL_CON0),
+ SAVE_ITEM(S5P_VPLL_CON1),
+};
+
+static struct sleep_save exynos4_core_save[] = {
+ /* GIC side */
+ SAVE_ITEM(S5P_VA_GIC_CPU + 0x000),
+ SAVE_ITEM(S5P_VA_GIC_CPU + 0x004),
+ SAVE_ITEM(S5P_VA_GIC_CPU + 0x008),
+ SAVE_ITEM(S5P_VA_GIC_CPU + 0x00C),
+ SAVE_ITEM(S5P_VA_GIC_CPU + 0x014),
+ SAVE_ITEM(S5P_VA_GIC_CPU + 0x018),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x000),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x004),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x100),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x104),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x108),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x300),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x304),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x308),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x400),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x404),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x408),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x40C),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x410),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x414),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x418),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x41C),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x420),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x424),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x428),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x42C),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x430),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x434),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x438),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x43C),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x440),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x444),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x448),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x44C),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x450),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x454),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x458),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x45C),
+
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x800),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x804),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x808),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x80C),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x810),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x814),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x818),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x81C),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x820),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x824),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x828),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x82C),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x830),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x834),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x838),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x83C),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x840),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x844),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x848),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x84C),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x850),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x854),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x858),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0x85C),
+
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0xC00),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0xC04),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0xC08),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0xC0C),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0xC10),
+ SAVE_ITEM(S5P_VA_GIC_DIST + 0xC14),
+
+ SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x000),
+ SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x010),
+ SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x020),
+ SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x030),
+ SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x040),
+ SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x050),
+ SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x060),
+ SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x070),
+ SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x080),
+ SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x090),
+
+ /* SROM side */
+ SAVE_ITEM(S5P_SROM_BW),
+ SAVE_ITEM(S5P_SROM_BC0),
+ SAVE_ITEM(S5P_SROM_BC1),
+ SAVE_ITEM(S5P_SROM_BC2),
+ SAVE_ITEM(S5P_SROM_BC3),
+};
+
+static struct sleep_save exynos4_l2cc_save[] = {
+ SAVE_ITEM(S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL),
+ SAVE_ITEM(S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL),
+ SAVE_ITEM(S5P_VA_L2CC + L2X0_PREFETCH_CTRL),
+ SAVE_ITEM(S5P_VA_L2CC + L2X0_POWER_CTRL),
+ SAVE_ITEM(S5P_VA_L2CC + L2X0_AUX_CTRL),
+};
+
+/* For Cortex-A9 Diagnostic and Power control register */
+static unsigned int save_arm_register[2];
+
+static int exynos4_cpu_suspend(unsigned long arg)
+{
+ outer_flush_all();
+
+ /* issue the standby signal into the pm unit. */
+ cpu_do_idle();
+
+ /* we should never get past here */
+ panic("sleep resumed to originator?");
+}
+
+static void exynos4_pm_prepare(void)
+{
+ u32 tmp;
+
+ s3c_pm_do_save(exynos4_core_save, ARRAY_SIZE(exynos4_core_save));
+ s3c_pm_do_save(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save));
+ s3c_pm_do_save(exynos4_epll_save, ARRAY_SIZE(exynos4_epll_save));
+ s3c_pm_do_save(exynos4_vpll_save, ARRAY_SIZE(exynos4_vpll_save));
+
+ tmp = __raw_readl(S5P_INFORM1);
+
+ /* Set value of power down register for sleep mode */
+
+ exynos4_sys_powerdown_conf(SYS_SLEEP);
+ __raw_writel(S5P_CHECK_SLEEP, S5P_INFORM1);
+
+ /* ensure at least INFORM0 has the resume address */
+
+ __raw_writel(virt_to_phys(s3c_cpu_resume), S5P_INFORM0);
+
+ /* Before enter central sequence mode, clock src register have to set */
+
+ s3c_pm_do_restore_core(exynos4_set_clksrc, ARRAY_SIZE(exynos4_set_clksrc));
+
+ if (soc_is_exynos4210())
+ s3c_pm_do_restore_core(exynos4210_set_clksrc, ARRAY_SIZE(exynos4210_set_clksrc));
+
+}
+
+static int exynos4_pm_add(struct sys_device *sysdev)
+{
+ pm_cpu_prep = exynos4_pm_prepare;
+ pm_cpu_sleep = exynos4_cpu_suspend;
+
+ return 0;
+}
+
+/* This function copy from linux/arch/arm/kernel/smp_scu.c */
+
+void exynos4_scu_enable(void __iomem *scu_base)
+{
+ u32 scu_ctrl;
+
+ scu_ctrl = __raw_readl(scu_base);
+ /* already enabled? */
+ if (scu_ctrl & 1)
+ return;
+
+ scu_ctrl |= 1;
+ __raw_writel(scu_ctrl, scu_base);
+
+ /*
+ * Ensure that the data accessed by CPU0 before the SCU was
+ * initialised is visible to the other CPUs.
+ */
+ flush_cache_all();
+}
+
+static unsigned long pll_base_rate;
+
+static void exynos4_restore_pll(void)
+{
+ unsigned long pll_con, locktime, lockcnt;
+ unsigned long pll_in_rate;
+ unsigned int p_div, epll_wait = 0, vpll_wait = 0;
+
+ if (pll_base_rate == 0)
+ return;
+
+ pll_in_rate = pll_base_rate;
+
+ /* EPLL */
+ pll_con = exynos4_epll_save[0].val;
+
+ if (pll_con & (1 << 31)) {
+ pll_con &= (PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT);
+ p_div = (pll_con >> PLL46XX_PDIV_SHIFT);
+
+ pll_in_rate /= 1000000;
+
+ locktime = (3000 / pll_in_rate) * p_div;
+ lockcnt = locktime * 10000 / (10000 / pll_in_rate);
+
+ __raw_writel(lockcnt, S5P_EPLL_LOCK);
+
+ s3c_pm_do_restore_core(exynos4_epll_save,
+ ARRAY_SIZE(exynos4_epll_save));
+ epll_wait = 1;
+ }
+
+ pll_in_rate = pll_base_rate;
+
+ /* VPLL */
+ pll_con = exynos4_vpll_save[0].val;
+
+ if (pll_con & (1 << 31)) {
+ pll_in_rate /= 1000000;
+ /* 750us */
+ locktime = 750;
+ lockcnt = locktime * 10000 / (10000 / pll_in_rate);
+
+ __raw_writel(lockcnt, S5P_VPLL_LOCK);
+
+ s3c_pm_do_restore_core(exynos4_vpll_save,
+ ARRAY_SIZE(exynos4_vpll_save));
+ vpll_wait = 1;
+ }
+
+ /* Wait PLL locking */
+
+ do {
+ if (epll_wait) {
+ pll_con = __raw_readl(S5P_EPLL_CON0);
+ if (pll_con & (1 << S5P_EPLLCON0_LOCKED_SHIFT))
+ epll_wait = 0;
+ }
+
+ if (vpll_wait) {
+ pll_con = __raw_readl(S5P_VPLL_CON0);
+ if (pll_con & (1 << S5P_VPLLCON0_LOCKED_SHIFT))
+ vpll_wait = 0;
+ }
+ } while (epll_wait || vpll_wait);
+}
+
+static struct sysdev_driver exynos4_pm_driver = {
+ .add = exynos4_pm_add,
+};
+
+static __init int exynos4_pm_drvinit(void)
+{
+ struct clk *pll_base;
+ unsigned int tmp;
+
+ s3c_pm_init();
+
+ /* All wakeup disable */
+
+ tmp = __raw_readl(S5P_WAKEUP_MASK);
+ tmp |= ((0xFF << 8) | (0x1F << 1));
+ __raw_writel(tmp, S5P_WAKEUP_MASK);
+
+ pll_base = clk_get(NULL, "xtal");
+
+ if (!IS_ERR(pll_base)) {
+ pll_base_rate = clk_get_rate(pll_base);
+ clk_put(pll_base);
+ }
+
+ return sysdev_driver_register(&exynos4_sysclass, &exynos4_pm_driver);
+}
+arch_initcall(exynos4_pm_drvinit);
+
+static int exynos4_pm_suspend(void)
+{
+ unsigned long tmp;
+
+ /* Setting Central Sequence Register for power down mode */
+
+ tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
+ tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
+ __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+
+ if (soc_is_exynos4212()) {
+ tmp = __raw_readl(S5P_CENTRAL_SEQ_OPTION);
+ tmp &= ~(S5P_USE_STANDBYWFI_ISP_ARM |
+ S5P_USE_STANDBYWFE_ISP_ARM);
+ __raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION);
+ }
+
+ /* Save Power control register */
+ asm ("mrc p15, 0, %0, c15, c0, 0"
+ : "=r" (tmp) : : "cc");
+ save_arm_register[0] = tmp;
+
+ /* Save Diagnostic register */
+ asm ("mrc p15, 0, %0, c15, c0, 1"
+ : "=r" (tmp) : : "cc");
+ save_arm_register[1] = tmp;
+
+ return 0;
+}
+
+static void exynos4_pm_resume(void)
+{
+ unsigned long tmp;
+
+ /*
+ * If PMU failed while entering sleep mode, WFI will be
+ * ignored by PMU and then exiting cpu_do_idle().
+ * S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically
+ * in this situation.
+ */
+ tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
+ if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) {
+ tmp |= S5P_CENTRAL_LOWPWR_CFG;
+ __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+ /* No need to perform below restore code */
+ goto early_wakeup;
+ }
+ /* Restore Power control register */
+ tmp = save_arm_register[0];
+ asm volatile ("mcr p15, 0, %0, c15, c0, 0"
+ : : "r" (tmp)
+ : "cc");
+
+ /* Restore Diagnostic register */
+ tmp = save_arm_register[1];
+ asm volatile ("mcr p15, 0, %0, c15, c0, 1"
+ : : "r" (tmp)
+ : "cc");
+
+ /* For release retention */
+
+ __raw_writel((1 << 28), S5P_PAD_RET_MAUDIO_OPTION);
+ __raw_writel((1 << 28), S5P_PAD_RET_GPIO_OPTION);
+ __raw_writel((1 << 28), S5P_PAD_RET_UART_OPTION);
+ __raw_writel((1 << 28), S5P_PAD_RET_MMCA_OPTION);
+ __raw_writel((1 << 28), S5P_PAD_RET_MMCB_OPTION);
+ __raw_writel((1 << 28), S5P_PAD_RET_EBIA_OPTION);
+ __raw_writel((1 << 28), S5P_PAD_RET_EBIB_OPTION);
+
+ s3c_pm_do_restore_core(exynos4_core_save, ARRAY_SIZE(exynos4_core_save));
+
+ exynos4_restore_pll();
+
+ exynos4_scu_enable(S5P_VA_SCU);
+
+#ifdef CONFIG_CACHE_L2X0
+ s3c_pm_do_restore_core(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save));
+ outer_inv_all();
+ /* enable L2X0*/
+ writel_relaxed(1, S5P_VA_L2CC + L2X0_CTRL);
+#endif
+
+early_wakeup:
+ return;
+}
+
+static struct syscore_ops exynos4_pm_syscore_ops = {
+ .suspend = exynos4_pm_suspend,
+ .resume = exynos4_pm_resume,
+};
+
+static __init int exynos4_pm_syscore_init(void)
+{
+ register_syscore_ops(&exynos4_pm_syscore_ops);
+ return 0;
+}
+arch_initcall(exynos4_pm_syscore_init);
--- /dev/null
+/* linux/arch/arm/mach-exynos4/pmu.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * EXYNOS4210 - CPU PMU(Power Management Unit) support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+
+#include <mach/regs-clock.h>
+#include <mach/pmu.h>
+
+static struct exynos4_pmu_conf *exynos4_pmu_config;
+
+static struct exynos4_pmu_conf exynos4210_pmu_config[] = {
+ /* { .reg = address, .val = { AFTR, LPA, SLEEP } */
+ { S5P_ARM_CORE0_LOWPWR, { 0x0, 0x0, 0x2 } },
+ { S5P_DIS_IRQ_CORE0, { 0x0, 0x0, 0x0 } },
+ { S5P_DIS_IRQ_CENTRAL0, { 0x0, 0x0, 0x0 } },
+ { S5P_ARM_CORE1_LOWPWR, { 0x0, 0x0, 0x2 } },
+ { S5P_DIS_IRQ_CORE1, { 0x0, 0x0, 0x0 } },
+ { S5P_DIS_IRQ_CENTRAL1, { 0x0, 0x0, 0x0 } },
+ { S5P_ARM_COMMON_LOWPWR, { 0x0, 0x0, 0x2 } },
+ { S5P_L2_0_LOWPWR, { 0x2, 0x2, 0x3 } },
+ { S5P_L2_1_LOWPWR, { 0x2, 0x2, 0x3 } },
+ { S5P_CMU_ACLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_SCLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_APLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_MPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_VPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_EPLL_SYSCLK_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_GPSALIVE_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_CAM_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_TV_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_MFC_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_G3D_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_LCD0_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_LCD1_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_GPS_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_CAM_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_TV_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_MFC_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_G3D_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_LCD0_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_LCD1_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_GPS_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_TOP_BUS_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_TOP_RETENTION_LOWPWR, { 0x1, 0x0, 0x1 } },
+ { S5P_TOP_PWR_LOWPWR, { 0x3, 0x0, 0x3 } },
+ { S5P_LOGIC_RESET_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_ONENAND_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_MODIMIF_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_G2D_ACP_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_USBOTG_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_HSMMC_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_CSSYS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_SECSS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_PCIE_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_SATA_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_DRAM_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_PAD_RETENTION_GPIO_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_UART_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_MMCA_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_MMCB_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_EBIA_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_EBIB_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_ISOLATION_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_ALV_SEL_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_XUSBXTI_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_XXTI_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_EXT_REGULATOR_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_GPIO_MODE_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_GPIO_MODE_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CAM_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_TV_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_MFC_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_G3D_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_LCD0_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_LCD1_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_MAUDIO_LOWPWR, { 0x7, 0x7, 0x0 } },
+ { S5P_GPS_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_GPS_ALIVE_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { PMU_TABLE_END,},
+};
+
+static struct exynos4_pmu_conf exynos4212_pmu_config[] = {
+ { S5P_ARM_CORE0_LOWPWR, { 0x0, 0x0, 0x2 } },
+ { S5P_DIS_IRQ_CORE0, { 0x0, 0x0, 0x0 } },
+ { S5P_DIS_IRQ_CENTRAL0, { 0x0, 0x0, 0x0 } },
+ { S5P_ARM_CORE1_LOWPWR, { 0x0, 0x0, 0x2 } },
+ { S5P_DIS_IRQ_CORE1, { 0x0, 0x0, 0x0 } },
+ { S5P_DIS_IRQ_CENTRAL1, { 0x0, 0x0, 0x0 } },
+ { S5P_ISP_ARM_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR, { 0x0, 0x0, 0x0 } },
+ { S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR, { 0x0, 0x0, 0x0 } },
+ { S5P_ARM_COMMON_LOWPWR, { 0x0, 0x0, 0x2 } },
+ { S5P_L2_0_LOWPWR, { 0x0, 0x0, 0x3 } },
+ /* XXX_OPTION register should be set other field */
+ { S5P_ARM_L2_0_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_L2_1_LOWPWR, { 0x0, 0x0, 0x3 } },
+ { S5P_ARM_L2_1_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_CMU_ACLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_SCLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_DRAM_FREQ_DOWN_LOWPWR, { 0x1, 0x1, 0x1 } },
+ { S5P_DDRPHY_DLLOFF_LOWPWR, { 0x1, 0x1, 0x1 } },
+ { S5P_LPDDR_PHY_DLL_LOCK_LOWPWR, { 0x1, 0x1, 0x1 } },
+ { S5P_CMU_ACLKSTOP_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_SCLKSTOP_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_COREBLK_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_APLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_MPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_VPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_EPLL_SYSCLK_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_MPLLUSER_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_GPSALIVE_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_CAM_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_TV_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_MFC_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_G3D_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_LCD0_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_ISP_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_MAUDIO_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_GPS_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_CAM_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_TV_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_MFC_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_G3D_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_LCD0_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_ISP_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_GPS_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_TOP_BUS_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_TOP_RETENTION_LOWPWR, { 0x1, 0x0, 0x1 } },
+ { S5P_TOP_PWR_LOWPWR, { 0x3, 0x0, 0x3 } },
+ { S5P_TOP_BUS_COREBLK_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_TOP_RETENTION_COREBLK_LOWPWR, { 0x1, 0x0, 0x1 } },
+ { S5P_TOP_PWR_COREBLK_LOWPWR, { 0x3, 0x0, 0x3 } },
+ { S5P_LOGIC_RESET_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_OSCCLK_GATE_LOWPWR, { 0x1, 0x0, 0x1 } },
+ { S5P_LOGIC_RESET_COREBLK_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_OSCCLK_GATE_COREBLK_LOWPWR, { 0x1, 0x0, 0x1 } },
+ { S5P_ONENAND_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_ONENAND_MEM_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_HSI_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_HSI_MEM_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_G2D_ACP_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_G2D_ACP_MEM_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_USBOTG_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_USBOTG_MEM_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_HSMMC_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_HSMMC_MEM_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_CSSYS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_CSSYS_MEM_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_SECSS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_SECSS_MEM_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_ROTATOR_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_ROTATOR_MEM_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_PAD_RETENTION_DRAM_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_PAD_RETENTION_GPIO_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_UART_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_MMCA_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_MMCB_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_EBIA_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_EBIB_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR,{ 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_ISOLATION_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_ISOLATION_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_ALV_SEL_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_XUSBXTI_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_XXTI_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_EXT_REGULATOR_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_GPIO_MODE_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_GPIO_MODE_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_GPIO_MODE_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_TOP_ASB_RESET_LOWPWR, { 0x1, 0x1, 0x1 } },
+ { S5P_TOP_ASB_ISOLATION_LOWPWR, { 0x1, 0x0, 0x1 } },
+ { S5P_CAM_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_TV_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_MFC_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_G3D_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_LCD0_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_ISP_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_MAUDIO_LOWPWR, { 0x7, 0x7, 0x0 } },
+ { S5P_GPS_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_GPS_ALIVE_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_CMU_SYSCLK_ISP_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_SYSCLK_GPS_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { PMU_TABLE_END,},
+};
+
+void exynos4_sys_powerdown_conf(enum sys_powerdown mode)
+{
+ unsigned int i;
+
+ for (i = 0; (exynos4_pmu_config[i].reg != PMU_TABLE_END) ; i++)
+ __raw_writel(exynos4_pmu_config[i].val[mode],
+ exynos4_pmu_config[i].reg);
+}
+
+static int __init exynos4_pmu_init(void)
+{
+ exynos4_pmu_config = exynos4210_pmu_config;
+
+ if (soc_is_exynos4210()) {
+ exynos4_pmu_config = exynos4210_pmu_config;
+ pr_info("EXYNOS4210 PMU Initialize\n");
+ } else if (soc_is_exynos4212()) {
+ exynos4_pmu_config = exynos4212_pmu_config;
+ pr_info("EXYNOS4212 PMU Initialize\n");
+ } else {
+ pr_info("EXYNOS4: PMU not supported\n");
+ }
+
+ return 0;
+}
+arch_initcall(exynos4_pmu_init);
--- /dev/null
+/*
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *
+ * Exynos4 camera interface GPIO configuration.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <plat/gpio-cfg.h>
+#include <plat/camport.h>
+
+int exynos4_fimc_setup_gpio(enum s5p_camport_id id)
+{
+ u32 gpio8, gpio5;
+ u32 sfn;
+ int ret;
+
+ switch (id) {
+ case S5P_CAMPORT_A:
+ gpio8 = EXYNOS4_GPJ0(0); /* PCLK, VSYNC, HREF, DATA[0:4] */
+ gpio5 = EXYNOS4_GPJ1(0); /* DATA[5:7], CLKOUT, FIELD */
+ sfn = S3C_GPIO_SFN(2);
+ break;
+
+ case S5P_CAMPORT_B:
+ gpio8 = EXYNOS4_GPE0(0); /* DATA[0:7] */
+ gpio5 = EXYNOS4_GPE1(0); /* PCLK, VSYNC, HREF, CLKOUT, FIELD */
+ sfn = S3C_GPIO_SFN(3);
+ break;
+
+ default:
+ WARN(1, "Wrong camport id: %d\n", id);
+ return -EINVAL;
+ }
+
+ ret = s3c_gpio_cfgall_range(gpio8, 8, sfn, S3C_GPIO_PULL_UP);
+ if (ret)
+ return ret;
+
+ return s3c_gpio_cfgall_range(gpio5, 5, sfn, S3C_GPIO_PULL_UP);
+}
--- /dev/null
+/* linux/arch/arm/mach-exynos4/setup-fimd0.c
+ *
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Base Exynos4 FIMD 0 configuration
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/fb.h>
+#include <linux/gpio.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/regs-fb-v4.h>
+
+#include <mach/map.h>
+
+void exynos4_fimd0_gpio_setup_24bpp(void)
+{
+ unsigned int reg;
+
+ s3c_gpio_cfgrange_nopull(EXYNOS4_GPF0(0), 8, S3C_GPIO_SFN(2));
+ s3c_gpio_cfgrange_nopull(EXYNOS4_GPF1(0), 8, S3C_GPIO_SFN(2));
+ s3c_gpio_cfgrange_nopull(EXYNOS4_GPF2(0), 8, S3C_GPIO_SFN(2));
+ s3c_gpio_cfgrange_nopull(EXYNOS4_GPF3(0), 4, S3C_GPIO_SFN(2));
+
+ /*
+ * Set DISPLAY_CONTROL register for Display path selection.
+ *
+ * DISPLAY_CONTROL[1:0]
+ * ---------------------
+ * 00 | MIE
+ * 01 | MDINE
+ * 10 | FIMD : selected
+ * 11 | FIMD
+ */
+ reg = __raw_readl(S3C_VA_SYS + 0x0210);
+ reg |= (1 << 1);
+ __raw_writel(reg, S3C_VA_SYS + 0x0210);
+}
--- /dev/null
+/*
+ * linux/arch/arm/mach-exynos4/setup-i2c0.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * I2C0 GPIO configuration.
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(EXYNOS4_GPD1(0), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+}
--- /dev/null
+/*
+ * linux/arch/arm/mach-exynos4/setup-i2c1.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co., Ltd.
+ *
+ * I2C1 GPIO configuration.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(EXYNOS4_GPD1(2), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+}
--- /dev/null
+/*
+ * linux/arch/arm/mach-exynos4/setup-i2c2.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *
+ * I2C2 GPIO configuration.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c2_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(EXYNOS4_GPA0(6), 2,
+ S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
+}
--- /dev/null
+/*
+ * linux/arch/arm/mach-exynos4/setup-i2c3.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *
+ * I2C3 GPIO configuration.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c3_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(EXYNOS4_GPA1(2), 2,
+ S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
+}
--- /dev/null
+/*
+ * linux/arch/arm/mach-exynos4/setup-i2c4.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *
+ * I2C4 GPIO configuration.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c4_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(EXYNOS4_GPB(2), 2,
+ S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
+}
--- /dev/null
+/*
+ * linux/arch/arm/mach-exynos4/setup-i2c5.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *
+ * I2C5 GPIO configuration.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c5_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(EXYNOS4_GPB(6), 2,
+ S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
+}
--- /dev/null
+/*
+ * linux/arch/arm/mach-exynos4/setup-i2c6.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *
+ * I2C6 GPIO configuration.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c6_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(EXYNOS4_GPC1(3), 2,
+ S3C_GPIO_SFN(4), S3C_GPIO_PULL_UP);
+}
--- /dev/null
+/*
+ * linux/arch/arm/mach-exynos4/setup-i2c7.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *
+ * I2C7 GPIO configuration.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c7_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(EXYNOS4_GPD0(2), 2,
+ S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
+}
--- /dev/null
+/* linux/arch/arm/mach-exynos4/setup-keypad.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * GPIO configuration for Exynos4 KeyPad device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gpio.h>
+#include <plat/gpio-cfg.h>
+
+void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
+{
+ /* Keypads can be of various combinations, Just making sure */
+
+ if (rows > 8) {
+ /* Set all the necessary GPX2 pins: KP_ROW[0~7] */
+ s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3),
+ S3C_GPIO_PULL_UP);
+
+ /* Set all the necessary GPX3 pins: KP_ROW[8~] */
+ s3c_gpio_cfgall_range(EXYNOS4_GPX3(0), (rows - 8),
+ S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
+ } else {
+ /* Set all the necessary GPX2 pins: KP_ROW[x] */
+ s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), rows, S3C_GPIO_SFN(3),
+ S3C_GPIO_PULL_UP);
+ }
+
+ /* Set all the necessary GPX1 pins to special-function 3: KP_COL[x] */
+ s3c_gpio_cfgrange_nopull(EXYNOS4_GPX1(0), cols, S3C_GPIO_SFN(3));
+}
--- /dev/null
+/* linux/arch/arm/mach-exynos4/setup-sdhci-gpio.c
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+ unsigned int gpio;
+
+ /* Set all the necessary GPK0[0:1] pins to special-function 2 */
+ for (gpio = EXYNOS4_GPK0(0); gpio < EXYNOS4_GPK0(2); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+
+ switch (width) {
+ case 8:
+ for (gpio = EXYNOS4_GPK1(3); gpio <= EXYNOS4_GPK1(6); gpio++) {
+ /* Data pin GPK1[3:6] to special-function 3 */
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+ case 4:
+ for (gpio = EXYNOS4_GPK0(3); gpio <= EXYNOS4_GPK0(6); gpio++) {
+ /* Data pin GPK0[3:6] to special-function 2 */
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+ default:
+ break;
+ }
+
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ s3c_gpio_cfgpin(EXYNOS4_GPK0(2), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(EXYNOS4_GPK0(2), S3C_GPIO_PULL_UP);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+}
+
+void exynos4_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+ unsigned int gpio;
+
+ /* Set all the necessary GPK1[0:1] pins to special-function 2 */
+ for (gpio = EXYNOS4_GPK1(0); gpio < EXYNOS4_GPK1(2); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+
+ for (gpio = EXYNOS4_GPK1(3); gpio <= EXYNOS4_GPK1(6); gpio++) {
+ /* Data pin GPK1[3:6] to special-function 2 */
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ s3c_gpio_cfgpin(EXYNOS4_GPK1(2), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(EXYNOS4_GPK1(2), S3C_GPIO_PULL_UP);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+}
+
+void exynos4_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+ unsigned int gpio;
+
+ /* Set all the necessary GPK2[0:1] pins to special-function 2 */
+ for (gpio = EXYNOS4_GPK2(0); gpio < EXYNOS4_GPK2(2); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+
+ switch (width) {
+ case 8:
+ for (gpio = EXYNOS4_GPK3(3); gpio <= EXYNOS4_GPK3(6); gpio++) {
+ /* Data pin GPK3[3:6] to special-function 3 */
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+ case 4:
+ for (gpio = EXYNOS4_GPK2(3); gpio <= EXYNOS4_GPK2(6); gpio++) {
+ /* Data pin GPK2[3:6] to special-function 2 */
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+ default:
+ break;
+ }
+
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ s3c_gpio_cfgpin(EXYNOS4_GPK2(2), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(EXYNOS4_GPK2(2), S3C_GPIO_PULL_UP);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+}
+
+void exynos4_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width)
+{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+ unsigned int gpio;
+
+ /* Set all the necessary GPK3[0:1] pins to special-function 2 */
+ for (gpio = EXYNOS4_GPK3(0); gpio < EXYNOS4_GPK3(2); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+
+ for (gpio = EXYNOS4_GPK3(3); gpio <= EXYNOS4_GPK3(6); gpio++) {
+ /* Data pin GPK3[3:6] to special-function 2 */
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ s3c_gpio_cfgpin(EXYNOS4_GPK3(2), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(EXYNOS4_GPK3(2), S3C_GPIO_PULL_UP);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+}
--- /dev/null
+/* linux/arch/arm/mach-exynos4/setup-sdhci.c
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/types.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *exynos4_hsmmc_clksrcs[4] = {
+ [0] = NULL,
+ [1] = NULL,
+ [2] = "sclk_mmc", /* mmc_bus */
+ [3] = NULL,
+};
--- /dev/null
+/*
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <mach/regs-pmu.h>
+#include <mach/regs-usb-phy.h>
+#include <plat/cpu.h>
+#include <plat/usb-phy.h>
+
+static int exynos4_usb_phy1_init(struct platform_device *pdev)
+{
+ struct clk *otg_clk;
+ struct clk *xusbxti_clk;
+ u32 phyclk;
+ u32 rstcon;
+ int err;
+
+ otg_clk = clk_get(&pdev->dev, "otg");
+ if (IS_ERR(otg_clk)) {
+ dev_err(&pdev->dev, "Failed to get otg clock\n");
+ return PTR_ERR(otg_clk);
+ }
+
+ err = clk_enable(otg_clk);
+ if (err) {
+ clk_put(otg_clk);
+ return err;
+ }
+
+ writel(readl(S5P_USBHOST_PHY_CONTROL) | S5P_USBHOST_PHY_ENABLE,
+ S5P_USBHOST_PHY_CONTROL);
+
+ /* set clock frequency for PLL */
+ phyclk = readl(EXYNOS4_PHYCLK) & ~CLKSEL_MASK;
+
+ xusbxti_clk = clk_get(&pdev->dev, "xusbxti");
+ if (xusbxti_clk && !IS_ERR(xusbxti_clk)) {
+ switch (clk_get_rate(xusbxti_clk)) {
+ case 12 * MHZ:
+ phyclk |= CLKSEL_12M;
+ break;
+ case 24 * MHZ:
+ phyclk |= CLKSEL_24M;
+ break;
+ default:
+ case 48 * MHZ:
+ /* default reference clock */
+ break;
+ }
+ clk_put(xusbxti_clk);
+ }
+
+ writel(phyclk, EXYNOS4_PHYCLK);
+
+ /* floating prevention logic: disable */
+ writel((readl(EXYNOS4_PHY1CON) | FPENABLEN), EXYNOS4_PHY1CON);
+
+ /* set to normal HSIC 0 and 1 of PHY1 */
+ writel((readl(EXYNOS4_PHYPWR) & ~PHY1_HSIC_NORMAL_MASK),
+ EXYNOS4_PHYPWR);
+
+ /* set to normal standard USB of PHY1 */
+ writel((readl(EXYNOS4_PHYPWR) & ~PHY1_STD_NORMAL_MASK), EXYNOS4_PHYPWR);
+
+ /* reset all ports of both PHY and Link */
+ rstcon = readl(EXYNOS4_RSTCON) | HOST_LINK_PORT_SWRST_MASK |
+ PHY1_SWRST_MASK;
+ writel(rstcon, EXYNOS4_RSTCON);
+ udelay(10);
+
+ rstcon &= ~(HOST_LINK_PORT_SWRST_MASK | PHY1_SWRST_MASK);
+ writel(rstcon, EXYNOS4_RSTCON);
+ udelay(80);
+
+ clk_disable(otg_clk);
+ clk_put(otg_clk);
+
+ return 0;
+}
+
+static int exynos4_usb_phy1_exit(struct platform_device *pdev)
+{
+ struct clk *otg_clk;
+ int err;
+
+ otg_clk = clk_get(&pdev->dev, "otg");
+ if (IS_ERR(otg_clk)) {
+ dev_err(&pdev->dev, "Failed to get otg clock\n");
+ return PTR_ERR(otg_clk);
+ }
+
+ err = clk_enable(otg_clk);
+ if (err) {
+ clk_put(otg_clk);
+ return err;
+ }
+
+ writel((readl(EXYNOS4_PHYPWR) | PHY1_STD_ANALOG_POWERDOWN),
+ EXYNOS4_PHYPWR);
+
+ writel(readl(S5P_USBHOST_PHY_CONTROL) & ~S5P_USBHOST_PHY_ENABLE,
+ S5P_USBHOST_PHY_CONTROL);
+
+ clk_disable(otg_clk);
+ clk_put(otg_clk);
+
+ return 0;
+}
+
+int s5p_usb_phy_init(struct platform_device *pdev, int type)
+{
+ if (type == S5P_USB_PHY_HOST)
+ return exynos4_usb_phy1_init(pdev);
+
+ return -EINVAL;
+}
+
+int s5p_usb_phy_exit(struct platform_device *pdev, int type)
+{
+ if (type == S5P_USB_PHY_HOST)
+ return exynos4_usb_phy1_exit(pdev);
+
+ return -EINVAL;
+}
+++ /dev/null
-# arch/arm/mach-exynos4/Kconfig
-#
-# Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
-# http://www.samsung.com/
-#
-# Licensed under GPLv2
-
-# Configuration options for the EXYNOS4
-
-if ARCH_EXYNOS4
-
-config CPU_EXYNOS4210
- bool
- select SAMSUNG_DMADEV
- select ARM_CPU_SUSPEND if PM
- help
- Enable EXYNOS4210 CPU support
-
-config SOC_EXYNOS4212
- bool
- help
- Enable EXYNOS4212 SoC support
-
-config SOC_EXYNOS4412
- bool
- help
- Enable EXYNOS4412 SoC support
-
-config EXYNOS4_MCT
- bool
- default y
- help
- Use MCT (Multi Core Timer) as kernel timers
-
-config EXYNOS4_DEV_AHCI
- bool
- help
- Compile in platform device definitions for AHCI
-
-config EXYNOS4_SETUP_FIMD0
- bool
- help
- Common setup code for FIMD0.
-
-config EXYNOS4_DEV_PD
- bool
- help
- Compile in platform device definitions for Power Domain
-
-config EXYNOS4_DEV_SYSMMU
- bool
- help
- Common setup code for SYSTEM MMU in EXYNOS4
-
-config EXYNOS4_DEV_DWMCI
- bool
- help
- Compile in platform device definitions for DWMCI
-
-config EXYNOS4_SETUP_I2C1
- bool
- help
- Common setup code for i2c bus 1.
-
-config EXYNOS4_SETUP_I2C2
- bool
- help
- Common setup code for i2c bus 2.
-
-config EXYNOS4_SETUP_I2C3
- bool
- help
- Common setup code for i2c bus 3.
-
-config EXYNOS4_SETUP_I2C4
- bool
- help
- Common setup code for i2c bus 4.
-
-config EXYNOS4_SETUP_I2C5
- bool
- help
- Common setup code for i2c bus 5.
-
-config EXYNOS4_SETUP_I2C6
- bool
- help
- Common setup code for i2c bus 6.
-
-config EXYNOS4_SETUP_I2C7
- bool
- help
- Common setup code for i2c bus 7.
-
-config EXYNOS4_SETUP_KEYPAD
- bool
- help
- Common setup code for keypad.
-
-config EXYNOS4_SETUP_SDHCI
- bool
- select EXYNOS4_SETUP_SDHCI_GPIO
- help
- Internal helper functions for EXYNOS4 based SDHCI systems.
-
-config EXYNOS4_SETUP_SDHCI_GPIO
- bool
- help
- Common setup code for SDHCI gpio.
-
-config EXYNOS4_SETUP_FIMC
- bool
- help
- Common setup code for the camera interfaces.
-
-config EXYNOS4_SETUP_USB_PHY
- bool
- help
- Common setup code for USB PHY controller
-
-# machine support
-
-menu "EXYNOS4 Machines"
-
-comment "EXYNOS4210 Boards"
-
-config MACH_SMDKC210
- bool "SMDKC210"
- select MACH_SMDKV310
- help
- Machine support for Samsung SMDKC210
-
-config MACH_SMDKV310
- bool "SMDKV310"
- select CPU_EXYNOS4210
- select S5P_DEV_FIMD0
- select S3C_DEV_RTC
- select S3C_DEV_WDT
- select S3C_DEV_I2C1
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_HSMMC2
- select S3C_DEV_HSMMC3
- select SAMSUNG_DEV_BACKLIGHT
- select EXYNOS4_DEV_AHCI
- select SAMSUNG_DEV_KEYPAD
- select EXYNOS4_DEV_PD
- select SAMSUNG_DEV_PWM
- select EXYNOS4_DEV_SYSMMU
- select EXYNOS4_SETUP_FIMD0
- select EXYNOS4_SETUP_I2C1
- select EXYNOS4_SETUP_KEYPAD
- select EXYNOS4_SETUP_SDHCI
- help
- Machine support for Samsung SMDKV310
-
-config MACH_ARMLEX4210
- bool "ARMLEX4210"
- select CPU_EXYNOS4210
- select S3C_DEV_RTC
- select S3C_DEV_WDT
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC2
- select S3C_DEV_HSMMC3
- select EXYNOS4_DEV_AHCI
- select EXYNOS4_DEV_SYSMMU
- select EXYNOS4_SETUP_SDHCI
- help
- Machine support for Samsung ARMLEX4210 based on EXYNOS4210
-
-config MACH_UNIVERSAL_C210
- bool "Mobile UNIVERSAL_C210 Board"
- select CPU_EXYNOS4210
- select S5P_GPIO_INT
- select S5P_DEV_FIMC0
- select S5P_DEV_FIMC1
- select S5P_DEV_FIMC2
- select S5P_DEV_FIMC3
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC2
- select S3C_DEV_HSMMC3
- select S3C_DEV_I2C1
- select S3C_DEV_I2C3
- select S3C_DEV_I2C5
- select S5P_DEV_MFC
- select S5P_DEV_ONENAND
- select EXYNOS4_DEV_PD
- select EXYNOS4_SETUP_I2C1
- select EXYNOS4_SETUP_I2C3
- select EXYNOS4_SETUP_I2C5
- select EXYNOS4_SETUP_SDHCI
- help
- Machine support for Samsung Mobile Universal S5PC210 Reference
- Board.
-
-config MACH_NURI
- bool "Mobile NURI Board"
- select CPU_EXYNOS4210
- select S3C_DEV_WDT
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC2
- select S3C_DEV_HSMMC3
- select S3C_DEV_I2C1
- select S3C_DEV_I2C3
- select S3C_DEV_I2C5
- select S5P_DEV_MFC
- select S5P_DEV_USB_EHCI
- select EXYNOS4_DEV_PD
- select EXYNOS4_SETUP_I2C1
- select EXYNOS4_SETUP_I2C3
- select EXYNOS4_SETUP_I2C5
- select EXYNOS4_SETUP_SDHCI
- select EXYNOS4_SETUP_USB_PHY
- select SAMSUNG_DEV_PWM
- select SAMSUNG_DEV_ADC
- help
- Machine support for Samsung Mobile NURI Board.
-
-config MACH_ORIGEN
- bool "ORIGEN"
- select CPU_EXYNOS4210
- select S3C_DEV_RTC
- select S3C_DEV_WDT
- select S3C_DEV_HSMMC2
- select EXYNOS4_SETUP_SDHCI
- help
- Machine support for ORIGEN based on Samsung EXYNOS4210
-
-comment "EXYNOS4212 Boards"
-
-config MACH_SMDK4212
- bool "SMDK4212"
- select SOC_EXYNOS4212
- select S3C_DEV_HSMMC2
- select S3C_DEV_HSMMC3
- select S3C_DEV_I2C1
- select S3C_DEV_I2C3
- select S3C_DEV_I2C7
- select S3C_DEV_RTC
- select S3C_DEV_WDT
- select SAMSUNG_DEV_BACKLIGHT
- select SAMSUNG_DEV_KEYPAD
- select SAMSUNG_DEV_PWM
- select EXYNOS4_SETUP_I2C1
- select EXYNOS4_SETUP_I2C3
- select EXYNOS4_SETUP_I2C7
- select EXYNOS4_SETUP_KEYPAD
- select EXYNOS4_SETUP_SDHCI
- help
- Machine support for Samsung SMDK4212
-
-comment "EXYNOS4412 Boards"
-
-config MACH_SMDK4412
- bool "SMDK4412"
- select SOC_EXYNOS4412
- select MACH_SMDK4212
- help
- Machine support for Samsung SMDK4412
-
-endmenu
-
-comment "Configuration for HSMMC bus width"
-
-menu "Use 8-bit bus width"
-
-config EXYNOS4_SDHCI_CH0_8BIT
- bool "Channel 0 with 8-bit bus"
- help
- Support HSMMC Channel 0 8-bit bus.
- If selected, Channel 1 is disabled.
-
-config EXYNOS4_SDHCI_CH2_8BIT
- bool "Channel 2 with 8-bit bus"
- help
- Support HSMMC Channel 2 8-bit bus.
- If selected, Channel 3 is disabled.
-
-endmenu
-
-endif
+++ /dev/null
-# arch/arm/mach-exynos4/Makefile
-#
-# Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
-# http://www.samsung.com/
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
-# Core support for EXYNOS4 system
-
-obj-$(CONFIG_ARCH_EXYNOS4) += cpu.o init.o clock.o irq-combiner.o
-obj-$(CONFIG_ARCH_EXYNOS4) += setup-i2c0.o irq-eint.o dma.o pmu.o
-obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o
-obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o
-obj-$(CONFIG_PM) += pm.o sleep.o
-obj-$(CONFIG_CPU_IDLE) += cpuidle.o
-
-obj-$(CONFIG_SMP) += platsmp.o headsmp.o
-
-obj-$(CONFIG_EXYNOS4_MCT) += mct.o
-
-obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-
-# machine support
-
-obj-$(CONFIG_MACH_SMDKC210) += mach-smdkv310.o
-obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o
-obj-$(CONFIG_MACH_ARMLEX4210) += mach-armlex4210.o
-obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o
-obj-$(CONFIG_MACH_NURI) += mach-nuri.o
-obj-$(CONFIG_MACH_ORIGEN) += mach-origen.o
-
-obj-$(CONFIG_MACH_SMDK4212) += mach-smdk4x12.o
-obj-$(CONFIG_MACH_SMDK4412) += mach-smdk4x12.o
-
-# device support
-
-obj-y += dev-audio.o
-obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o
-obj-$(CONFIG_EXYNOS4_DEV_PD) += dev-pd.o
-obj-$(CONFIG_EXYNOS4_DEV_SYSMMU) += dev-sysmmu.o
-obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o
-
-obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o
-obj-$(CONFIG_EXYNOS4_SETUP_FIMD0) += setup-fimd0.o
-obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o
-obj-$(CONFIG_EXYNOS4_SETUP_I2C2) += setup-i2c2.o
-obj-$(CONFIG_EXYNOS4_SETUP_I2C3) += setup-i2c3.o
-obj-$(CONFIG_EXYNOS4_SETUP_I2C4) += setup-i2c4.o
-obj-$(CONFIG_EXYNOS4_SETUP_I2C5) += setup-i2c5.o
-obj-$(CONFIG_EXYNOS4_SETUP_I2C6) += setup-i2c6.o
-obj-$(CONFIG_EXYNOS4_SETUP_I2C7) += setup-i2c7.o
-obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD) += setup-keypad.o
-obj-$(CONFIG_EXYNOS4_SETUP_SDHCI) += setup-sdhci.o
-obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
-
-obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY) += setup-usb-phy.o
+++ /dev/null
- zreladdr-y += 0x40008000
-params_phys-y := 0x40000100
+++ /dev/null
-/*
- * linux/arch/arm/mach-exynos4/clock-exynos4210.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4210 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/exynos4.h>
-#include <plat/pm.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-#include <mach/exynos4-clock.h>
-
-static struct sleep_save exynos4210_clock_save[] = {
- SAVE_ITEM(S5P_CLKSRC_IMAGE),
- SAVE_ITEM(S5P_CLKSRC_LCD1),
- SAVE_ITEM(S5P_CLKDIV_IMAGE),
- SAVE_ITEM(S5P_CLKDIV_LCD1),
- SAVE_ITEM(S5P_CLKSRC_MASK_LCD1),
- SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4210),
- SAVE_ITEM(S5P_CLKGATE_IP_LCD1),
- SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210),
-};
-
-static struct clksrc_clk *sysclks[] = {
- /* nothing here yet */
-};
-
-static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable);
-}
-
-static struct clksrc_clk clksrcs[] = {
- {
- .clk = {
- .name = "sclk_sata",
- .id = -1,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 24),
- },
- .sources = &clkset_mout_corebus,
- .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 },
- .reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimd",
- .devname = "exynos4-fb.1",
- .enable = exynos4_clksrc_mask_lcd1_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 },
- },
-};
-
-static struct clk init_clocks_off[] = {
- {
- .name = "sataphy",
- .id = -1,
- .parent = &clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "sata",
- .id = -1,
- .parent = &clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 10),
- }, {
- .name = "fimd",
- .devname = "exynos4-fb.1",
- .enable = exynos4_clk_ip_lcd1_ctrl,
- .ctrlbit = (1 << 0),
- },
-};
-
-#ifdef CONFIG_PM_SLEEP
-static int exynos4210_clock_suspend(void)
-{
- s3c_pm_do_save(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
-
- return 0;
-}
-
-static void exynos4210_clock_resume(void)
-{
- s3c_pm_do_restore_core(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
-}
-
-#else
-#define exynos4210_clock_suspend NULL
-#define exynos4210_clock_resume NULL
-#endif
-
-struct syscore_ops exynos4210_clock_syscore_ops = {
- .suspend = exynos4210_clock_suspend,
- .resume = exynos4210_clock_resume,
-};
-
-void __init exynos4210_register_clocks(void)
-{
- int ptr;
-
- clk_mout_mpll.reg_src.reg = S5P_CLKSRC_CPU;
- clk_mout_mpll.reg_src.shift = 8;
- clk_mout_mpll.reg_src.size = 1;
-
- for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
- s3c_register_clksrc(sysclks[ptr], 1);
-
- s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
-
- s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
- register_syscore_ops(&exynos4210_clock_syscore_ops);
-}
+++ /dev/null
-/*
- * linux/arch/arm/mach-exynos4/clock-exynos4212.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4212 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/exynos4.h>
-#include <plat/pm.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-#include <mach/exynos4-clock.h>
-
-static struct sleep_save exynos4212_clock_save[] = {
- SAVE_ITEM(S5P_CLKSRC_IMAGE),
- SAVE_ITEM(S5P_CLKDIV_IMAGE),
- SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212),
- SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212),
-};
-
-static struct clk *clk_src_mpll_user_list[] = {
- [0] = &clk_fin_mpll,
- [1] = &clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources clk_src_mpll_user = {
- .sources = clk_src_mpll_user_list,
- .nr_sources = ARRAY_SIZE(clk_src_mpll_user_list),
-};
-
-static struct clksrc_clk clk_mout_mpll_user = {
- .clk = {
- .name = "mout_mpll_user",
- },
- .sources = &clk_src_mpll_user,
- .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 24, .size = 1 },
-};
-
-static struct clksrc_clk *sysclks[] = {
- &clk_mout_mpll_user,
-};
-
-static struct clksrc_clk clksrcs[] = {
- /* nothing here yet */
-};
-
-static struct clk init_clocks_off[] = {
- /* nothing here yet */
-};
-
-#ifdef CONFIG_PM_SLEEP
-static int exynos4212_clock_suspend(void)
-{
- s3c_pm_do_save(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
-
- return 0;
-}
-
-static void exynos4212_clock_resume(void)
-{
- s3c_pm_do_restore_core(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
-}
-
-#else
-#define exynos4212_clock_suspend NULL
-#define exynos4212_clock_resume NULL
-#endif
-
-struct syscore_ops exynos4212_clock_syscore_ops = {
- .suspend = exynos4212_clock_suspend,
- .resume = exynos4212_clock_resume,
-};
-
-void __init exynos4212_register_clocks(void)
-{
- int ptr;
-
- /* usbphy1 is removed */
- clkset_group_list[4] = NULL;
-
- /* mout_mpll_user is used */
- clkset_group_list[6] = &clk_mout_mpll_user.clk;
- clkset_aclk_top_list[0] = &clk_mout_mpll_user.clk;
-
- clk_mout_mpll.reg_src.reg = S5P_CLKSRC_DMC;
- clk_mout_mpll.reg_src.shift = 12;
- clk_mout_mpll.reg_src.size = 1;
-
- for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
- s3c_register_clksrc(sysclks[ptr], 1);
-
- s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
-
- s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
- register_syscore_ops(&exynos4212_clock_syscore_ops);
-}
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/clock.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/exynos4.h>
-#include <plat/pm.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-#include <mach/sysmmu.h>
-#include <mach/exynos4-clock.h>
-
-static struct sleep_save exynos4_clock_save[] = {
- SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
- SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
- SAVE_ITEM(S5P_CLKDIV_RIGHTBUS),
- SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS),
- SAVE_ITEM(S5P_CLKSRC_TOP0),
- SAVE_ITEM(S5P_CLKSRC_TOP1),
- SAVE_ITEM(S5P_CLKSRC_CAM),
- SAVE_ITEM(S5P_CLKSRC_TV),
- SAVE_ITEM(S5P_CLKSRC_MFC),
- SAVE_ITEM(S5P_CLKSRC_G3D),
- SAVE_ITEM(S5P_CLKSRC_LCD0),
- SAVE_ITEM(S5P_CLKSRC_MAUDIO),
- SAVE_ITEM(S5P_CLKSRC_FSYS),
- SAVE_ITEM(S5P_CLKSRC_PERIL0),
- SAVE_ITEM(S5P_CLKSRC_PERIL1),
- SAVE_ITEM(S5P_CLKDIV_CAM),
- SAVE_ITEM(S5P_CLKDIV_TV),
- SAVE_ITEM(S5P_CLKDIV_MFC),
- SAVE_ITEM(S5P_CLKDIV_G3D),
- SAVE_ITEM(S5P_CLKDIV_LCD0),
- SAVE_ITEM(S5P_CLKDIV_MAUDIO),
- SAVE_ITEM(S5P_CLKDIV_FSYS0),
- SAVE_ITEM(S5P_CLKDIV_FSYS1),
- SAVE_ITEM(S5P_CLKDIV_FSYS2),
- SAVE_ITEM(S5P_CLKDIV_FSYS3),
- SAVE_ITEM(S5P_CLKDIV_PERIL0),
- SAVE_ITEM(S5P_CLKDIV_PERIL1),
- SAVE_ITEM(S5P_CLKDIV_PERIL2),
- SAVE_ITEM(S5P_CLKDIV_PERIL3),
- SAVE_ITEM(S5P_CLKDIV_PERIL4),
- SAVE_ITEM(S5P_CLKDIV_PERIL5),
- SAVE_ITEM(S5P_CLKDIV_TOP),
- SAVE_ITEM(S5P_CLKSRC_MASK_TOP),
- SAVE_ITEM(S5P_CLKSRC_MASK_CAM),
- SAVE_ITEM(S5P_CLKSRC_MASK_TV),
- SAVE_ITEM(S5P_CLKSRC_MASK_LCD0),
- SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO),
- SAVE_ITEM(S5P_CLKSRC_MASK_FSYS),
- SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0),
- SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1),
- SAVE_ITEM(S5P_CLKDIV2_RATIO),
- SAVE_ITEM(S5P_CLKGATE_SCLKCAM),
- SAVE_ITEM(S5P_CLKGATE_IP_CAM),
- SAVE_ITEM(S5P_CLKGATE_IP_TV),
- SAVE_ITEM(S5P_CLKGATE_IP_MFC),
- SAVE_ITEM(S5P_CLKGATE_IP_G3D),
- SAVE_ITEM(S5P_CLKGATE_IP_LCD0),
- SAVE_ITEM(S5P_CLKGATE_IP_FSYS),
- SAVE_ITEM(S5P_CLKGATE_IP_GPS),
- SAVE_ITEM(S5P_CLKGATE_IP_PERIL),
- SAVE_ITEM(S5P_CLKGATE_BLOCK),
- SAVE_ITEM(S5P_CLKSRC_MASK_DMC),
- SAVE_ITEM(S5P_CLKSRC_DMC),
- SAVE_ITEM(S5P_CLKDIV_DMC0),
- SAVE_ITEM(S5P_CLKDIV_DMC1),
- SAVE_ITEM(S5P_CLKGATE_IP_DMC),
- SAVE_ITEM(S5P_CLKSRC_CPU),
- SAVE_ITEM(S5P_CLKDIV_CPU),
- SAVE_ITEM(S5P_CLKDIV_CPU + 0x4),
- SAVE_ITEM(S5P_CLKGATE_SCLKCPU),
- SAVE_ITEM(S5P_CLKGATE_IP_CPU),
-};
-
-struct clk clk_sclk_hdmi27m = {
- .name = "sclk_hdmi27m",
- .rate = 27000000,
-};
-
-struct clk clk_sclk_hdmiphy = {
- .name = "sclk_hdmiphy",
-};
-
-struct clk clk_sclk_usbphy0 = {
- .name = "sclk_usbphy0",
- .rate = 27000000,
-};
-
-struct clk clk_sclk_usbphy1 = {
- .name = "sclk_usbphy1",
-};
-
-static struct clk dummy_apb_pclk = {
- .name = "apb_pclk",
- .id = -1,
-};
-
-static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKSRC_MASK_TOP, clk, enable);
-}
-
-static int exynos4_clksrc_mask_cam_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKSRC_MASK_CAM, clk, enable);
-}
-
-static int exynos4_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKSRC_MASK_LCD0, clk, enable);
-}
-
-int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKSRC_MASK_FSYS, clk, enable);
-}
-
-static int exynos4_clksrc_mask_peril0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKSRC_MASK_PERIL0, clk, enable);
-}
-
-static int exynos4_clksrc_mask_peril1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKSRC_MASK_PERIL1, clk, enable);
-}
-
-static int exynos4_clk_ip_mfc_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_IP_MFC, clk, enable);
-}
-
-static int exynos4_clk_ip_cam_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_IP_CAM, clk, enable);
-}
-
-static int exynos4_clk_ip_tv_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_IP_TV, clk, enable);
-}
-
-static int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_IP_IMAGE, clk, enable);
-}
-
-static int exynos4_clk_ip_lcd0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_IP_LCD0, clk, enable);
-}
-
-int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_IP_LCD1, clk, enable);
-}
-
-int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_IP_FSYS, clk, enable);
-}
-
-static int exynos4_clk_ip_peril_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_IP_PERIL, clk, enable);
-}
-
-static int exynos4_clk_ip_perir_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_IP_PERIR, clk, enable);
-}
-
-/* Core list of CMU_CPU side */
-
-static struct clksrc_clk clk_mout_apll = {
- .clk = {
- .name = "mout_apll",
- },
- .sources = &clk_src_apll,
- .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 0, .size = 1 },
-};
-
-struct clksrc_clk clk_sclk_apll = {
- .clk = {
- .name = "sclk_apll",
- .parent = &clk_mout_apll.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 24, .size = 3 },
-};
-
-struct clksrc_clk clk_mout_epll = {
- .clk = {
- .name = "mout_epll",
- },
- .sources = &clk_src_epll,
- .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 4, .size = 1 },
-};
-
-struct clksrc_clk clk_mout_mpll = {
- .clk = {
- .name = "mout_mpll",
- },
- .sources = &clk_src_mpll,
-
- /* reg_src will be added in each SoCs' clock */
-};
-
-static struct clk *clkset_moutcore_list[] = {
- [0] = &clk_mout_apll.clk,
- [1] = &clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources clkset_moutcore = {
- .sources = clkset_moutcore_list,
- .nr_sources = ARRAY_SIZE(clkset_moutcore_list),
-};
-
-static struct clksrc_clk clk_moutcore = {
- .clk = {
- .name = "moutcore",
- },
- .sources = &clkset_moutcore,
- .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 16, .size = 1 },
-};
-
-static struct clksrc_clk clk_coreclk = {
- .clk = {
- .name = "core_clk",
- .parent = &clk_moutcore.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk clk_armclk = {
- .clk = {
- .name = "armclk",
- .parent = &clk_coreclk.clk,
- },
-};
-
-static struct clksrc_clk clk_aclk_corem0 = {
- .clk = {
- .name = "aclk_corem0",
- .parent = &clk_coreclk.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 4, .size = 3 },
-};
-
-static struct clksrc_clk clk_aclk_cores = {
- .clk = {
- .name = "aclk_cores",
- .parent = &clk_coreclk.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 4, .size = 3 },
-};
-
-static struct clksrc_clk clk_aclk_corem1 = {
- .clk = {
- .name = "aclk_corem1",
- .parent = &clk_coreclk.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 8, .size = 3 },
-};
-
-static struct clksrc_clk clk_periphclk = {
- .clk = {
- .name = "periphclk",
- .parent = &clk_coreclk.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 12, .size = 3 },
-};
-
-/* Core list of CMU_CORE side */
-
-struct clk *clkset_corebus_list[] = {
- [0] = &clk_mout_mpll.clk,
- [1] = &clk_sclk_apll.clk,
-};
-
-struct clksrc_sources clkset_mout_corebus = {
- .sources = clkset_corebus_list,
- .nr_sources = ARRAY_SIZE(clkset_corebus_list),
-};
-
-static struct clksrc_clk clk_mout_corebus = {
- .clk = {
- .name = "mout_corebus",
- },
- .sources = &clkset_mout_corebus,
- .reg_src = { .reg = S5P_CLKSRC_DMC, .shift = 4, .size = 1 },
-};
-
-static struct clksrc_clk clk_sclk_dmc = {
- .clk = {
- .name = "sclk_dmc",
- .parent = &clk_mout_corebus.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 12, .size = 3 },
-};
-
-static struct clksrc_clk clk_aclk_cored = {
- .clk = {
- .name = "aclk_cored",
- .parent = &clk_sclk_dmc.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 16, .size = 3 },
-};
-
-static struct clksrc_clk clk_aclk_corep = {
- .clk = {
- .name = "aclk_corep",
- .parent = &clk_aclk_cored.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 20, .size = 3 },
-};
-
-static struct clksrc_clk clk_aclk_acp = {
- .clk = {
- .name = "aclk_acp",
- .parent = &clk_mout_corebus.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk clk_pclk_acp = {
- .clk = {
- .name = "pclk_acp",
- .parent = &clk_aclk_acp.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 4, .size = 3 },
-};
-
-/* Core list of CMU_TOP side */
-
-struct clk *clkset_aclk_top_list[] = {
- [0] = &clk_mout_mpll.clk,
- [1] = &clk_sclk_apll.clk,
-};
-
-struct clksrc_sources clkset_aclk = {
- .sources = clkset_aclk_top_list,
- .nr_sources = ARRAY_SIZE(clkset_aclk_top_list),
-};
-
-static struct clksrc_clk clk_aclk_200 = {
- .clk = {
- .name = "aclk_200",
- },
- .sources = &clkset_aclk,
- .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 12, .size = 1 },
- .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk clk_aclk_100 = {
- .clk = {
- .name = "aclk_100",
- },
- .sources = &clkset_aclk,
- .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 16, .size = 1 },
- .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk clk_aclk_160 = {
- .clk = {
- .name = "aclk_160",
- },
- .sources = &clkset_aclk,
- .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 20, .size = 1 },
- .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 8, .size = 3 },
-};
-
-struct clksrc_clk clk_aclk_133 = {
- .clk = {
- .name = "aclk_133",
- },
- .sources = &clkset_aclk,
- .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 24, .size = 1 },
- .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 12, .size = 3 },
-};
-
-static struct clk *clkset_vpllsrc_list[] = {
- [0] = &clk_fin_vpll,
- [1] = &clk_sclk_hdmi27m,
-};
-
-static struct clksrc_sources clkset_vpllsrc = {
- .sources = clkset_vpllsrc_list,
- .nr_sources = ARRAY_SIZE(clkset_vpllsrc_list),
-};
-
-static struct clksrc_clk clk_vpllsrc = {
- .clk = {
- .name = "vpll_src",
- .enable = exynos4_clksrc_mask_top_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &clkset_vpllsrc,
- .reg_src = { .reg = S5P_CLKSRC_TOP1, .shift = 0, .size = 1 },
-};
-
-static struct clk *clkset_sclk_vpll_list[] = {
- [0] = &clk_vpllsrc.clk,
- [1] = &clk_fout_vpll,
-};
-
-static struct clksrc_sources clkset_sclk_vpll = {
- .sources = clkset_sclk_vpll_list,
- .nr_sources = ARRAY_SIZE(clkset_sclk_vpll_list),
-};
-
-struct clksrc_clk clk_sclk_vpll = {
- .clk = {
- .name = "sclk_vpll",
- },
- .sources = &clkset_sclk_vpll,
- .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 8, .size = 1 },
-};
-
-static struct clk init_clocks_off[] = {
- {
- .name = "timers",
- .parent = &clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1<<24),
- }, {
- .name = "csis",
- .devname = "s5p-mipi-csis.0",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "csis",
- .devname = "s5p-mipi-csis.1",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "fimc",
- .devname = "exynos4-fimc.0",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "fimc",
- .devname = "exynos4-fimc.1",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "fimc",
- .devname = "exynos4-fimc.2",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "fimc",
- .devname = "exynos4-fimc.3",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "fimd",
- .devname = "exynos4-fb.0",
- .enable = exynos4_clk_ip_lcd0_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.0",
- .parent = &clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.1",
- .parent = &clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.2",
- .parent = &clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.3",
- .parent = &clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "dwmmc",
- .parent = &clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 9),
- }, {
- .name = "dma",
- .devname = "s3c-pl330.0",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "dma",
- .devname = "s3c-pl330.1",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "adc",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 15),
- }, {
- .name = "keypad",
- .enable = exynos4_clk_ip_perir_ctrl,
- .ctrlbit = (1 << 16),
- }, {
- .name = "rtc",
- .enable = exynos4_clk_ip_perir_ctrl,
- .ctrlbit = (1 << 15),
- }, {
- .name = "watchdog",
- .parent = &clk_aclk_100.clk,
- .enable = exynos4_clk_ip_perir_ctrl,
- .ctrlbit = (1 << 14),
- }, {
- .name = "usbhost",
- .enable = exynos4_clk_ip_fsys_ctrl ,
- .ctrlbit = (1 << 12),
- }, {
- .name = "otg",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 13),
- }, {
- .name = "spi",
- .devname = "s3c64xx-spi.0",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 16),
- }, {
- .name = "spi",
- .devname = "s3c64xx-spi.1",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 17),
- }, {
- .name = "spi",
- .devname = "s3c64xx-spi.2",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 18),
- }, {
- .name = "iis",
- .devname = "samsung-i2s.0",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 19),
- }, {
- .name = "iis",
- .devname = "samsung-i2s.1",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 20),
- }, {
- .name = "iis",
- .devname = "samsung-i2s.2",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 21),
- }, {
- .name = "ac97",
- .devname = "samsung-ac97",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 27),
- }, {
- .name = "fimg2d",
- .enable = exynos4_clk_ip_image_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "mfc",
- .devname = "s5p-mfc",
- .enable = exynos4_clk_ip_mfc_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.0",
- .parent = &clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.1",
- .parent = &clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.2",
- .parent = &clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.3",
- .parent = &clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 9),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.4",
- .parent = &clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 10),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.5",
- .parent = &clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 11),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.6",
- .parent = &clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 12),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.7",
- .parent = &clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 13),
- }, {
- .name = "SYSMMU_MDMA",
- .enable = exynos4_clk_ip_image_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "SYSMMU_FIMC0",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "SYSMMU_FIMC1",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "SYSMMU_FIMC2",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 9),
- }, {
- .name = "SYSMMU_FIMC3",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 10),
- }, {
- .name = "SYSMMU_JPEG",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 11),
- }, {
- .name = "SYSMMU_FIMD0",
- .enable = exynos4_clk_ip_lcd0_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "SYSMMU_FIMD1",
- .enable = exynos4_clk_ip_lcd1_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "SYSMMU_PCIe",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 18),
- }, {
- .name = "SYSMMU_G2D",
- .enable = exynos4_clk_ip_image_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "SYSMMU_ROTATOR",
- .enable = exynos4_clk_ip_image_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "SYSMMU_TV",
- .enable = exynos4_clk_ip_tv_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "SYSMMU_MFC_L",
- .enable = exynos4_clk_ip_mfc_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "SYSMMU_MFC_R",
- .enable = exynos4_clk_ip_mfc_ctrl,
- .ctrlbit = (1 << 2),
- }
-};
-
-static struct clk init_clocks[] = {
- {
- .name = "uart",
- .devname = "s5pv210-uart.0",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.1",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.2",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.3",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.4",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.5",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 5),
- }
-};
-
-struct clk *clkset_group_list[] = {
- [0] = &clk_ext_xtal_mux,
- [1] = &clk_xusbxti,
- [2] = &clk_sclk_hdmi27m,
- [3] = &clk_sclk_usbphy0,
- [4] = &clk_sclk_usbphy1,
- [5] = &clk_sclk_hdmiphy,
- [6] = &clk_mout_mpll.clk,
- [7] = &clk_mout_epll.clk,
- [8] = &clk_sclk_vpll.clk,
-};
-
-struct clksrc_sources clkset_group = {
- .sources = clkset_group_list,
- .nr_sources = ARRAY_SIZE(clkset_group_list),
-};
-
-static struct clk *clkset_mout_g2d0_list[] = {
- [0] = &clk_mout_mpll.clk,
- [1] = &clk_sclk_apll.clk,
-};
-
-static struct clksrc_sources clkset_mout_g2d0 = {
- .sources = clkset_mout_g2d0_list,
- .nr_sources = ARRAY_SIZE(clkset_mout_g2d0_list),
-};
-
-static struct clksrc_clk clk_mout_g2d0 = {
- .clk = {
- .name = "mout_g2d0",
- },
- .sources = &clkset_mout_g2d0,
- .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 0, .size = 1 },
-};
-
-static struct clk *clkset_mout_g2d1_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_sclk_vpll.clk,
-};
-
-static struct clksrc_sources clkset_mout_g2d1 = {
- .sources = clkset_mout_g2d1_list,
- .nr_sources = ARRAY_SIZE(clkset_mout_g2d1_list),
-};
-
-static struct clksrc_clk clk_mout_g2d1 = {
- .clk = {
- .name = "mout_g2d1",
- },
- .sources = &clkset_mout_g2d1,
- .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 4, .size = 1 },
-};
-
-static struct clk *clkset_mout_g2d_list[] = {
- [0] = &clk_mout_g2d0.clk,
- [1] = &clk_mout_g2d1.clk,
-};
-
-static struct clksrc_sources clkset_mout_g2d = {
- .sources = clkset_mout_g2d_list,
- .nr_sources = ARRAY_SIZE(clkset_mout_g2d_list),
-};
-
-static struct clk *clkset_mout_mfc0_list[] = {
- [0] = &clk_mout_mpll.clk,
- [1] = &clk_sclk_apll.clk,
-};
-
-static struct clksrc_sources clkset_mout_mfc0 = {
- .sources = clkset_mout_mfc0_list,
- .nr_sources = ARRAY_SIZE(clkset_mout_mfc0_list),
-};
-
-static struct clksrc_clk clk_mout_mfc0 = {
- .clk = {
- .name = "mout_mfc0",
- },
- .sources = &clkset_mout_mfc0,
- .reg_src = { .reg = S5P_CLKSRC_MFC, .shift = 0, .size = 1 },
-};
-
-static struct clk *clkset_mout_mfc1_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_sclk_vpll.clk,
-};
-
-static struct clksrc_sources clkset_mout_mfc1 = {
- .sources = clkset_mout_mfc1_list,
- .nr_sources = ARRAY_SIZE(clkset_mout_mfc1_list),
-};
-
-static struct clksrc_clk clk_mout_mfc1 = {
- .clk = {
- .name = "mout_mfc1",
- },
- .sources = &clkset_mout_mfc1,
- .reg_src = { .reg = S5P_CLKSRC_MFC, .shift = 4, .size = 1 },
-};
-
-static struct clk *clkset_mout_mfc_list[] = {
- [0] = &clk_mout_mfc0.clk,
- [1] = &clk_mout_mfc1.clk,
-};
-
-static struct clksrc_sources clkset_mout_mfc = {
- .sources = clkset_mout_mfc_list,
- .nr_sources = ARRAY_SIZE(clkset_mout_mfc_list),
-};
-
-static struct clksrc_clk clk_dout_mmc0 = {
- .clk = {
- .name = "dout_mmc0",
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 0, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_dout_mmc1 = {
- .clk = {
- .name = "dout_mmc1",
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 4, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk clk_dout_mmc2 = {
- .clk = {
- .name = "dout_mmc2",
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 8, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_dout_mmc3 = {
- .clk = {
- .name = "dout_mmc3",
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 12, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk clk_dout_mmc4 = {
- .clk = {
- .name = "dout_mmc4",
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 16, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_FSYS3, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clksrcs[] = {
- {
- .clk = {
- .name = "uclk1",
- .devname = "s5pv210-uart.0",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 0, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "uclk1",
- .devname = "s5pv210-uart.1",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 4),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 4, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 4, .size = 4 },
- }, {
- .clk = {
- .name = "uclk1",
- .devname = "s5pv210-uart.2",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 8),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 8, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 8, .size = 4 },
- }, {
- .clk = {
- .name = "uclk1",
- .devname = "s5pv210-uart.3",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 12),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 12, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 12, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_pwm",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 24),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 24, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL3, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_csis",
- .devname = "s5p-mipi-csis.0",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 24),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 24, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 24, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_csis",
- .devname = "s5p-mipi-csis.1",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 28),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 28, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_cam0",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 16),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 16, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_cam1",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 20),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 20, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 20, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimc",
- .devname = "exynos4-fimc.0",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 0, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimc",
- .devname = "exynos4-fimc.1",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 4),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 4, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 4, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimc",
- .devname = "exynos4-fimc.2",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 8),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 8, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 8, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimc",
- .devname = "exynos4-fimc.3",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 12),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 12, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 12, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimd",
- .devname = "exynos4-fb.0",
- .enable = exynos4_clksrc_mask_lcd0_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_LCD0, .shift = 0, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_LCD0, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_spi",
- .devname = "s3c64xx-spi.0",
- .enable = exynos4_clksrc_mask_peril1_ctrl,
- .ctrlbit = (1 << 16),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 16, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_spi",
- .devname = "s3c64xx-spi.1",
- .enable = exynos4_clksrc_mask_peril1_ctrl,
- .ctrlbit = (1 << 20),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 20, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 16, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_spi",
- .devname = "s3c64xx-spi.2",
- .enable = exynos4_clksrc_mask_peril1_ctrl,
- .ctrlbit = (1 << 24),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 24, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL2, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimg2d",
- },
- .sources = &clkset_mout_g2d,
- .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 8, .size = 1 },
- .reg_div = { .reg = S5P_CLKDIV_IMAGE, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_mfc",
- .devname = "s5p-mfc",
- },
- .sources = &clkset_mout_mfc,
- .reg_src = { .reg = S5P_CLKSRC_MFC, .shift = 8, .size = 1 },
- .reg_div = { .reg = S5P_CLKDIV_MFC, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.0",
- .parent = &clk_dout_mmc0.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 0),
- },
- .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 8, .size = 8 },
- }, {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.1",
- .parent = &clk_dout_mmc1.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 4),
- },
- .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 24, .size = 8 },
- }, {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.2",
- .parent = &clk_dout_mmc2.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 8),
- },
- .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 8, .size = 8 },
- }, {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.3",
- .parent = &clk_dout_mmc3.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 12),
- },
- .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 24, .size = 8 },
- }, {
- .clk = {
- .name = "sclk_dwmmc",
- .parent = &clk_dout_mmc4.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 16),
- },
- .reg_div = { .reg = S5P_CLKDIV_FSYS3, .shift = 8, .size = 8 },
- }
-};
-
-/* Clock initialization code */
-static struct clksrc_clk *sysclks[] = {
- &clk_mout_apll,
- &clk_sclk_apll,
- &clk_mout_epll,
- &clk_mout_mpll,
- &clk_moutcore,
- &clk_coreclk,
- &clk_armclk,
- &clk_aclk_corem0,
- &clk_aclk_cores,
- &clk_aclk_corem1,
- &clk_periphclk,
- &clk_mout_corebus,
- &clk_sclk_dmc,
- &clk_aclk_cored,
- &clk_aclk_corep,
- &clk_aclk_acp,
- &clk_pclk_acp,
- &clk_vpllsrc,
- &clk_sclk_vpll,
- &clk_aclk_200,
- &clk_aclk_100,
- &clk_aclk_160,
- &clk_aclk_133,
- &clk_dout_mmc0,
- &clk_dout_mmc1,
- &clk_dout_mmc2,
- &clk_dout_mmc3,
- &clk_dout_mmc4,
- &clk_mout_mfc0,
- &clk_mout_mfc1,
-};
-
-static int xtal_rate;
-
-static unsigned long exynos4_fout_apll_get_rate(struct clk *clk)
-{
- if (soc_is_exynos4210())
- return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0),
- pll_4508);
- else if (soc_is_exynos4212() || soc_is_exynos4412())
- return s5p_get_pll35xx(xtal_rate, __raw_readl(S5P_APLL_CON0));
- else
- return 0;
-}
-
-static struct clk_ops exynos4_fout_apll_ops = {
- .get_rate = exynos4_fout_apll_get_rate,
-};
-
-void __init_or_cpufreq exynos4_setup_clocks(void)
-{
- struct clk *xtal_clk;
- unsigned long apll = 0;
- unsigned long mpll = 0;
- unsigned long epll = 0;
- unsigned long vpll = 0;
- unsigned long vpllsrc;
- unsigned long xtal;
- unsigned long armclk;
- unsigned long sclk_dmc;
- unsigned long aclk_200;
- unsigned long aclk_100;
- unsigned long aclk_160;
- unsigned long aclk_133;
- unsigned int ptr;
-
- printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
- xtal_clk = clk_get(NULL, "xtal");
- BUG_ON(IS_ERR(xtal_clk));
-
- xtal = clk_get_rate(xtal_clk);
-
- xtal_rate = xtal;
-
- clk_put(xtal_clk);
-
- printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
- if (soc_is_exynos4210()) {
- apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0),
- pll_4508);
- mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0),
- pll_4508);
- epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0),
- __raw_readl(S5P_EPLL_CON1), pll_4600);
-
- vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
- vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
- __raw_readl(S5P_VPLL_CON1), pll_4650c);
- } else if (soc_is_exynos4212() || soc_is_exynos4412()) {
- apll = s5p_get_pll35xx(xtal, __raw_readl(S5P_APLL_CON0));
- mpll = s5p_get_pll35xx(xtal, __raw_readl(S5P_MPLL_CON0));
- epll = s5p_get_pll36xx(xtal, __raw_readl(S5P_EPLL_CON0),
- __raw_readl(S5P_EPLL_CON1));
-
- vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
- vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
- __raw_readl(S5P_VPLL_CON1));
- } else {
- /* nothing */
- }
-
- clk_fout_apll.ops = &exynos4_fout_apll_ops;
- clk_fout_mpll.rate = mpll;
- clk_fout_epll.rate = epll;
- clk_fout_vpll.rate = vpll;
-
- printk(KERN_INFO "EXYNOS4: PLL settings, A=%ld, M=%ld, E=%ld V=%ld",
- apll, mpll, epll, vpll);
-
- armclk = clk_get_rate(&clk_armclk.clk);
- sclk_dmc = clk_get_rate(&clk_sclk_dmc.clk);
-
- aclk_200 = clk_get_rate(&clk_aclk_200.clk);
- aclk_100 = clk_get_rate(&clk_aclk_100.clk);
- aclk_160 = clk_get_rate(&clk_aclk_160.clk);
- aclk_133 = clk_get_rate(&clk_aclk_133.clk);
-
- printk(KERN_INFO "EXYNOS4: ARMCLK=%ld, DMC=%ld, ACLK200=%ld\n"
- "ACLK100=%ld, ACLK160=%ld, ACLK133=%ld\n",
- armclk, sclk_dmc, aclk_200,
- aclk_100, aclk_160, aclk_133);
-
- clk_f.rate = armclk;
- clk_h.rate = sclk_dmc;
- clk_p.rate = aclk_100;
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
- s3c_set_clksrc(&clksrcs[ptr], true);
-}
-
-static struct clk *clks[] __initdata = {
- /* Nothing here yet */
-};
-
-#ifdef CONFIG_PM_SLEEP
-static int exynos4_clock_suspend(void)
-{
- s3c_pm_do_save(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
- return 0;
-}
-
-static void exynos4_clock_resume(void)
-{
- s3c_pm_do_restore_core(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
-}
-
-#else
-#define exynos4_clock_suspend NULL
-#define exynos4_clock_resume NULL
-#endif
-
-struct syscore_ops exynos4_clock_syscore_ops = {
- .suspend = exynos4_clock_suspend,
- .resume = exynos4_clock_resume,
-};
-
-void __init exynos4_register_clocks(void)
-{
- int ptr;
-
- s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
- for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
- s3c_register_clksrc(sysclks[ptr], 1);
-
- s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
- s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-
- s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
-<<<<<<< HEAD
- register_syscore_ops(&exynos4_clock_syscore_ops);
-=======
- s3c24xx_register_clock(&dummy_apb_pclk);
-
->>>>>>> 4598fc2c94b68740e0269db03c98a1e7ad5af773
- s3c_pwmclk_init();
-}
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/cpu.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/sched.h>
-#include <linux/sysdev.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/proc-fns.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
-
-#include <plat/cpu.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/exynos4.h>
-#include <plat/adc-core.h>
-#include <plat/sdhci.h>
-#include <plat/fb-core.h>
-#include <plat/fimc-core.h>
-#include <plat/iic-core.h>
-#include <plat/reset.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-pmu.h>
-
-unsigned int gic_bank_offset __read_mostly;
-
-extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
- unsigned int irq_start);
-extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
-
-/* Initial IO mappings */
-static struct map_desc exynos4_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_SYSTIMER,
- .pfn = __phys_to_pfn(EXYNOS4_PA_SYSTIMER),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_CMU,
- .pfn = __phys_to_pfn(EXYNOS4_PA_CMU),
- .length = SZ_128K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_PMU,
- .pfn = __phys_to_pfn(EXYNOS4_PA_PMU),
- .length = SZ_64K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_COMBINER_BASE,
- .pfn = __phys_to_pfn(EXYNOS4_PA_COMBINER),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_COREPERI_BASE,
- .pfn = __phys_to_pfn(EXYNOS4_PA_COREPERI),
- .length = SZ_8K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_L2CC,
- .pfn = __phys_to_pfn(EXYNOS4_PA_L2CC),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GPIO1,
- .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO1),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GPIO2,
- .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO2),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GPIO3,
- .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO3),
- .length = SZ_256,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_DMC0,
- .pfn = __phys_to_pfn(EXYNOS4_PA_DMC0),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_UART,
- .pfn = __phys_to_pfn(S3C_PA_UART),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_SROMC,
- .pfn = __phys_to_pfn(EXYNOS4_PA_SROMC),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_USB_HSPHY,
- .pfn = __phys_to_pfn(EXYNOS4_PA_HSPHY),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GIC_CPU,
- .pfn = __phys_to_pfn(EXYNOS4_PA_GIC_CPU),
- .length = SZ_64K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GIC_DIST,
- .pfn = __phys_to_pfn(EXYNOS4_PA_GIC_DIST),
- .length = SZ_64K,
- .type = MT_DEVICE,
- },
-};
-
-static struct map_desc exynos4_iodesc0[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_SYSRAM,
- .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM0),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-static struct map_desc exynos4_iodesc1[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_SYSRAM,
- .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM1),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-static void exynos4_idle(void)
-{
- if (!need_resched())
- cpu_do_idle();
-
- local_irq_enable();
-}
-
-static void exynos4_sw_reset(void)
-{
- __raw_writel(0x1, S5P_SWRESET);
-}
-
-/*
- * exynos4_map_io
- *
- * register the standard cpu IO areas
- */
-void __init exynos4_map_io(void)
-{
- iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
-
- if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
- iotable_init(exynos4_iodesc0, ARRAY_SIZE(exynos4_iodesc0));
- else
- iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1));
-
- /* initialize device information early */
- exynos4_default_sdhci0();
- exynos4_default_sdhci1();
- exynos4_default_sdhci2();
- exynos4_default_sdhci3();
-
- s3c_adc_setname("samsung-adc-v3");
-
- s3c_fimc_setname(0, "exynos4-fimc");
- s3c_fimc_setname(1, "exynos4-fimc");
- s3c_fimc_setname(2, "exynos4-fimc");
- s3c_fimc_setname(3, "exynos4-fimc");
-
- /* The I2C bus controllers are directly compatible with s3c2440 */
- s3c_i2c0_setname("s3c2440-i2c");
- s3c_i2c1_setname("s3c2440-i2c");
- s3c_i2c2_setname("s3c2440-i2c");
-
- s5p_fb_setname(0, "exynos4-fb");
-}
-
-void __init exynos4_init_clocks(int xtal)
-{
- printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
- s3c24xx_register_baseclocks(xtal);
- s5p_register_clocks(xtal);
-
- if (soc_is_exynos4210())
- exynos4210_register_clocks();
- else if (soc_is_exynos4212() || soc_is_exynos4412())
- exynos4212_register_clocks();
-
- exynos4_register_clocks();
- exynos4_setup_clocks();
-}
-
-static void exynos4_gic_irq_fix_base(struct irq_data *d)
-{
- struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
-
- gic_data->cpu_base = S5P_VA_GIC_CPU +
- (gic_bank_offset * smp_processor_id());
-
- gic_data->dist_base = S5P_VA_GIC_DIST +
- (gic_bank_offset * smp_processor_id());
-}
-
-void __init exynos4_init_irq(void)
-{
- int irq;
-
- gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
-
- gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
- gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base;
- gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base;
- gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base;
-
- for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
-
- combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
- COMBINER_IRQ(irq, 0));
- combiner_cascade_irq(irq, IRQ_SPI(irq));
- }
-
- /* The parameters of s5p_init_irq() are for VIC init.
- * Theses parameters should be NULL and 0 because EXYNOS4
- * uses GIC instead of VIC.
- */
- s5p_init_irq(NULL, 0);
-}
-
-struct sysdev_class exynos4_sysclass = {
- .name = "exynos4-core",
-};
-
-static struct sys_device exynos4_sysdev = {
- .cls = &exynos4_sysclass,
-};
-
-static int __init exynos4_core_init(void)
-{
- return sysdev_class_register(&exynos4_sysclass);
-}
-
-core_initcall(exynos4_core_init);
-
-#ifdef CONFIG_CACHE_L2X0
-static int __init exynos4_l2x0_cache_init(void)
-{
- /* TAG, Data Latency Control: 2cycle */
- __raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
-
- if (soc_is_exynos4210())
- __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
- else if (soc_is_exynos4212() || soc_is_exynos4412())
- __raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
-
- /* L2X0 Prefetch Control */
- __raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
-
- /* L2X0 Power Control */
- __raw_writel(L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN,
- S5P_VA_L2CC + L2X0_POWER_CTRL);
-
- l2x0_init(S5P_VA_L2CC, 0x7C470001, 0xC200ffff);
-
- return 0;
-}
-
-early_initcall(exynos4_l2x0_cache_init);
-#endif
-
-int __init exynos4_init(void)
-{
- printk(KERN_INFO "EXYNOS4: Initializing architecture\n");
-
- /* set idle function */
- pm_idle = exynos4_idle;
-
- /* set sw_reset function */
- s5p_reset_hook = exynos4_sw_reset;
-
- return sysdev_register(&exynos4_sysdev);
-}
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/cpuidle.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/cpuidle.h>
-#include <linux/io.h>
-
-#include <asm/proc-fns.h>
-
-static int exynos4_enter_idle(struct cpuidle_device *dev,
- struct cpuidle_state *state);
-
-static struct cpuidle_state exynos4_cpuidle_set[] = {
- [0] = {
- .enter = exynos4_enter_idle,
- .exit_latency = 1,
- .target_residency = 100000,
- .flags = CPUIDLE_FLAG_TIME_VALID,
- .name = "IDLE",
- .desc = "ARM clock gating(WFI)",
- },
-};
-
-static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device);
-
-static struct cpuidle_driver exynos4_idle_driver = {
- .name = "exynos4_idle",
- .owner = THIS_MODULE,
-};
-
-static int exynos4_enter_idle(struct cpuidle_device *dev,
- struct cpuidle_state *state)
-{
- struct timeval before, after;
- int idle_time;
-
- local_irq_disable();
- do_gettimeofday(&before);
-
- cpu_do_idle();
-
- do_gettimeofday(&after);
- local_irq_enable();
- idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
- (after.tv_usec - before.tv_usec);
-
- return idle_time;
-}
-
-static int __init exynos4_init_cpuidle(void)
-{
- int i, max_cpuidle_state, cpu_id;
- struct cpuidle_device *device;
-
- cpuidle_register_driver(&exynos4_idle_driver);
-
- for_each_cpu(cpu_id, cpu_online_mask) {
- device = &per_cpu(exynos4_cpuidle_device, cpu_id);
- device->cpu = cpu_id;
-
- device->state_count = (sizeof(exynos4_cpuidle_set) /
- sizeof(struct cpuidle_state));
-
- max_cpuidle_state = device->state_count;
-
- for (i = 0; i < max_cpuidle_state; i++) {
- memcpy(&device->states[i], &exynos4_cpuidle_set[i],
- sizeof(struct cpuidle_state));
- }
-
- if (cpuidle_register_device(device)) {
- printk(KERN_ERR "CPUidle register device failed\n,");
- return -EIO;
- }
- }
- return 0;
-}
-device_initcall(exynos4_init_cpuidle);
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/dev-ahci.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - AHCI support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/ahci_platform.h>
-
-#include <plat/cpu.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-#include <mach/regs-pmu.h>
-
-/* PHY Control Register */
-#define SATA_CTRL0 0x0
-/* PHY Link Control Register */
-#define SATA_CTRL1 0x4
-/* PHY Status Register */
-#define SATA_PHY_STATUS 0x8
-
-#define SATA_CTRL0_RX_DATA_VALID(x) (x << 27)
-#define SATA_CTRL0_SPEED_MODE (1 << 26)
-#define SATA_CTRL0_M_PHY_CAL (1 << 19)
-#define SATA_CTRL0_PHY_CMU_RST_N (1 << 10)
-#define SATA_CTRL0_M_PHY_LN_RST_N (1 << 9)
-#define SATA_CTRL0_PHY_POR_N (1 << 8)
-
-#define SATA_CTRL1_RST_PMALIVE_N (1 << 8)
-#define SATA_CTRL1_RST_RXOOB_N (1 << 7)
-#define SATA_CTRL1_RST_RX_N (1 << 6)
-#define SATA_CTRL1_RST_TX_N (1 << 5)
-
-#define SATA_PHY_STATUS_CMU_OK (1 << 18)
-#define SATA_PHY_STATUS_LANE_OK (1 << 16)
-
-#define LANE0 0x200
-#define COM_LANE 0xA00
-
-#define HOST_PORTS_IMPL 0xC
-#define SCLK_SATA_FREQ (67 * MHZ)
-
-static void __iomem *phy_base, *phy_ctrl;
-
-struct phy_reg {
- u8 reg;
- u8 val;
-};
-
-/* SATA PHY setup */
-static const struct phy_reg exynos4_sataphy_cmu[] = {
- { 0x00, 0x06 }, { 0x02, 0x80 }, { 0x22, 0xa0 }, { 0x23, 0x42 },
- { 0x2e, 0x04 }, { 0x2f, 0x50 }, { 0x30, 0x70 }, { 0x31, 0x02 },
- { 0x32, 0x25 }, { 0x33, 0x40 }, { 0x34, 0x01 }, { 0x35, 0x40 },
- { 0x61, 0x2e }, { 0x63, 0x5e }, { 0x65, 0x42 }, { 0x66, 0xd1 },
- { 0x67, 0x20 }, { 0x68, 0x28 }, { 0x69, 0x78 }, { 0x6a, 0x04 },
- { 0x6b, 0xc8 }, { 0x6c, 0x06 },
-};
-
-static const struct phy_reg exynos4_sataphy_lane[] = {
- { 0x00, 0x02 }, { 0x05, 0x10 }, { 0x06, 0x84 }, { 0x07, 0x04 },
- { 0x08, 0xe0 }, { 0x10, 0x23 }, { 0x13, 0x05 }, { 0x14, 0x30 },
- { 0x15, 0x00 }, { 0x17, 0x70 }, { 0x18, 0xf2 }, { 0x19, 0x1e },
- { 0x1a, 0x18 }, { 0x1b, 0x0d }, { 0x1c, 0x08 }, { 0x50, 0x60 },
- { 0x51, 0x0f },
-};
-
-static const struct phy_reg exynos4_sataphy_comlane[] = {
- { 0x01, 0x20 }, { 0x03, 0x40 }, { 0x04, 0x3c }, { 0x05, 0x7d },
- { 0x06, 0x1d }, { 0x07, 0xcf }, { 0x08, 0x05 }, { 0x09, 0x63 },
- { 0x0a, 0x29 }, { 0x0b, 0xc4 }, { 0x0c, 0x01 }, { 0x0d, 0x03 },
- { 0x0e, 0x28 }, { 0x0f, 0x98 }, { 0x10, 0x19 }, { 0x13, 0x80 },
- { 0x14, 0xf0 }, { 0x15, 0xd0 }, { 0x39, 0xa0 }, { 0x3a, 0xa0 },
- { 0x3b, 0xa0 }, { 0x3c, 0xa0 }, { 0x3d, 0xa0 }, { 0x3e, 0xa0 },
- { 0x3f, 0xa0 }, { 0x40, 0x42 }, { 0x42, 0x80 }, { 0x43, 0x58 },
- { 0x45, 0x44 }, { 0x46, 0x5c }, { 0x47, 0x86 }, { 0x48, 0x8d },
- { 0x49, 0xd0 }, { 0x4a, 0x09 }, { 0x4b, 0x90 }, { 0x4c, 0x07 },
- { 0x4d, 0x40 }, { 0x51, 0x20 }, { 0x52, 0x32 }, { 0x7f, 0xd8 },
- { 0x80, 0x1a }, { 0x81, 0xff }, { 0x82, 0x11 }, { 0x83, 0x00 },
- { 0x87, 0xf0 }, { 0x87, 0xff }, { 0x87, 0xff }, { 0x87, 0xff },
- { 0x87, 0xff }, { 0x8c, 0x1c }, { 0x8d, 0xc2 }, { 0x8e, 0xc3 },
- { 0x8f, 0x3f }, { 0x90, 0x0a }, { 0x96, 0xf8 },
-};
-
-static int wait_for_phy_ready(void __iomem *reg, unsigned long bit)
-{
- unsigned long timeout;
-
- /* wait for maximum of 3 sec */
- timeout = jiffies + msecs_to_jiffies(3000);
- while (!(__raw_readl(reg) & bit)) {
- if (time_after(jiffies, timeout))
- return -1;
- cpu_relax();
- }
- return 0;
-}
-
-static int ahci_phy_init(void __iomem *mmio)
-{
- int i, ctrl0;
-
- for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_cmu); i++)
- __raw_writeb(exynos4_sataphy_cmu[i].val,
- phy_base + (exynos4_sataphy_cmu[i].reg * 4));
-
- for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_lane); i++)
- __raw_writeb(exynos4_sataphy_lane[i].val,
- phy_base + (LANE0 + exynos4_sataphy_lane[i].reg) * 4);
-
- for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_comlane); i++)
- __raw_writeb(exynos4_sataphy_comlane[i].val,
- phy_base + (COM_LANE + exynos4_sataphy_comlane[i].reg) * 4);
-
- __raw_writeb(0x07, phy_base);
-
- ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0);
- ctrl0 |= SATA_CTRL0_PHY_CMU_RST_N;
- __raw_writel(ctrl0, phy_ctrl + SATA_CTRL0);
-
- if (wait_for_phy_ready(phy_ctrl + SATA_PHY_STATUS,
- SATA_PHY_STATUS_CMU_OK) < 0) {
- printk(KERN_ERR "PHY CMU not ready\n");
- return -EBUSY;
- }
-
- __raw_writeb(0x03, phy_base + (COM_LANE * 4));
-
- ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0);
- ctrl0 |= SATA_CTRL0_M_PHY_LN_RST_N;
- __raw_writel(ctrl0, phy_ctrl + SATA_CTRL0);
-
- if (wait_for_phy_ready(phy_ctrl + SATA_PHY_STATUS,
- SATA_PHY_STATUS_LANE_OK) < 0) {
- printk(KERN_ERR "PHY LANE not ready\n");
- return -EBUSY;
- }
-
- ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0);
- ctrl0 |= SATA_CTRL0_M_PHY_CAL;
- __raw_writel(ctrl0, phy_ctrl + SATA_CTRL0);
-
- return 0;
-}
-
-static int exynos4_ahci_init(struct device *dev, void __iomem *mmio)
-{
- struct clk *clk_sata, *clk_sataphy, *clk_sclk_sata;
- int val, ret;
-
- phy_base = ioremap(EXYNOS4_PA_SATAPHY, SZ_64K);
- if (!phy_base) {
- dev_err(dev, "failed to allocate memory for SATA PHY\n");
- return -ENOMEM;
- }
-
- phy_ctrl = ioremap(EXYNOS4_PA_SATAPHY_CTRL, SZ_16);
- if (!phy_ctrl) {
- dev_err(dev, "failed to allocate memory for SATA PHY CTRL\n");
- ret = -ENOMEM;
- goto err1;
- }
-
- clk_sata = clk_get(dev, "sata");
- if (IS_ERR(clk_sata)) {
- dev_err(dev, "failed to get sata clock\n");
- ret = PTR_ERR(clk_sata);
- clk_sata = NULL;
- goto err2;
-
- }
- clk_enable(clk_sata);
-
- clk_sataphy = clk_get(dev, "sataphy");
- if (IS_ERR(clk_sataphy)) {
- dev_err(dev, "failed to get sataphy clock\n");
- ret = PTR_ERR(clk_sataphy);
- clk_sataphy = NULL;
- goto err3;
- }
- clk_enable(clk_sataphy);
-
- clk_sclk_sata = clk_get(dev, "sclk_sata");
- if (IS_ERR(clk_sclk_sata)) {
- dev_err(dev, "failed to get sclk_sata\n");
- ret = PTR_ERR(clk_sclk_sata);
- clk_sclk_sata = NULL;
- goto err4;
- }
- clk_enable(clk_sclk_sata);
- clk_set_rate(clk_sclk_sata, SCLK_SATA_FREQ);
-
- __raw_writel(S5P_PMU_SATA_PHY_CONTROL_EN, S5P_PMU_SATA_PHY_CONTROL);
-
- /* Enable PHY link control */
- val = SATA_CTRL1_RST_PMALIVE_N | SATA_CTRL1_RST_RXOOB_N |
- SATA_CTRL1_RST_RX_N | SATA_CTRL1_RST_TX_N;
- __raw_writel(val, phy_ctrl + SATA_CTRL1);
-
- /* Set communication speed as 3Gbps and enable PHY power */
- val = SATA_CTRL0_RX_DATA_VALID(3) | SATA_CTRL0_SPEED_MODE |
- SATA_CTRL0_PHY_POR_N;
- __raw_writel(val, phy_ctrl + SATA_CTRL0);
-
- /* Port0 is available */
- __raw_writel(0x1, mmio + HOST_PORTS_IMPL);
-
- return ahci_phy_init(mmio);
-
-err4:
- clk_disable(clk_sataphy);
- clk_put(clk_sataphy);
-err3:
- clk_disable(clk_sata);
- clk_put(clk_sata);
-err2:
- iounmap(phy_ctrl);
-err1:
- iounmap(phy_base);
-
- return ret;
-}
-
-static struct ahci_platform_data exynos4_ahci_pdata = {
- .init = exynos4_ahci_init,
-};
-
-static struct resource exynos4_ahci_resource[] = {
- [0] = {
- .start = EXYNOS4_PA_SATA,
- .end = EXYNOS4_PA_SATA + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_SATA,
- .end = IRQ_SATA,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 exynos4_ahci_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device exynos4_device_ahci = {
- .name = "ahci",
- .id = -1,
- .resource = exynos4_ahci_resource,
- .num_resources = ARRAY_SIZE(exynos4_ahci_resource),
- .dev = {
- .platform_data = &exynos4_ahci_pdata,
- .dma_mask = &exynos4_ahci_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/dev-audio.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright (c) 2010 Samsung Electronics Co. Ltd
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/audio.h>
-
-#include <mach/map.h>
-#include <mach/dma.h>
-#include <mach/irqs.h>
-#include <mach/regs-audss.h>
-
-static const char *rclksrc[] = {
- [0] = "busclk",
- [1] = "i2sclk",
-};
-
-static int exynos4_cfg_i2s(struct platform_device *pdev)
-{
- /* configure GPIO for i2s port */
- switch (pdev->id) {
- case 0:
- s3c_gpio_cfgpin_range(EXYNOS4_GPZ(0), 7, S3C_GPIO_SFN(2));
- break;
- case 1:
- s3c_gpio_cfgpin_range(EXYNOS4_GPC0(0), 5, S3C_GPIO_SFN(2));
- break;
- case 2:
- s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 5, S3C_GPIO_SFN(4));
- break;
- default:
- printk(KERN_ERR "Invalid Device %d\n", pdev->id);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static struct s3c_audio_pdata i2sv5_pdata = {
- .cfg_gpio = exynos4_cfg_i2s,
- .type = {
- .i2s = {
- .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI
- | QUIRK_NEED_RSTCLR,
- .src_clk = rclksrc,
- .idma_addr = EXYNOS4_AUDSS_INT_MEM,
- },
- },
-};
-
-static struct resource exynos4_i2s0_resource[] = {
- [0] = {
- .start = EXYNOS4_PA_I2S0,
- .end = EXYNOS4_PA_I2S0 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_I2S0_TX,
- .end = DMACH_I2S0_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_I2S0_RX,
- .end = DMACH_I2S0_RX,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .start = DMACH_I2S0S_TX,
- .end = DMACH_I2S0S_TX,
- .flags = IORESOURCE_DMA,
- },
-};
-
-struct platform_device exynos4_device_i2s0 = {
- .name = "samsung-i2s",
- .id = 0,
- .num_resources = ARRAY_SIZE(exynos4_i2s0_resource),
- .resource = exynos4_i2s0_resource,
- .dev = {
- .platform_data = &i2sv5_pdata,
- },
-};
-
-static const char *rclksrc_v3[] = {
- [0] = "sclk_i2s",
- [1] = "no_such_clock",
-};
-
-static struct s3c_audio_pdata i2sv3_pdata = {
- .cfg_gpio = exynos4_cfg_i2s,
- .type = {
- .i2s = {
- .quirks = QUIRK_NO_MUXPSR,
- .src_clk = rclksrc_v3,
- },
- },
-};
-
-static struct resource exynos4_i2s1_resource[] = {
- [0] = {
- .start = EXYNOS4_PA_I2S1,
- .end = EXYNOS4_PA_I2S1 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_I2S1_TX,
- .end = DMACH_I2S1_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_I2S1_RX,
- .end = DMACH_I2S1_RX,
- .flags = IORESOURCE_DMA,
- },
-};
-
-struct platform_device exynos4_device_i2s1 = {
- .name = "samsung-i2s",
- .id = 1,
- .num_resources = ARRAY_SIZE(exynos4_i2s1_resource),
- .resource = exynos4_i2s1_resource,
- .dev = {
- .platform_data = &i2sv3_pdata,
- },
-};
-
-static struct resource exynos4_i2s2_resource[] = {
- [0] = {
- .start = EXYNOS4_PA_I2S2,
- .end = EXYNOS4_PA_I2S2 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_I2S2_TX,
- .end = DMACH_I2S2_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_I2S2_RX,
- .end = DMACH_I2S2_RX,
- .flags = IORESOURCE_DMA,
- },
-};
-
-struct platform_device exynos4_device_i2s2 = {
- .name = "samsung-i2s",
- .id = 2,
- .num_resources = ARRAY_SIZE(exynos4_i2s2_resource),
- .resource = exynos4_i2s2_resource,
- .dev = {
- .platform_data = &i2sv3_pdata,
- },
-};
-
-/* PCM Controller platform_devices */
-
-static int exynos4_pcm_cfg_gpio(struct platform_device *pdev)
-{
- switch (pdev->id) {
- case 0:
- s3c_gpio_cfgpin_range(EXYNOS4_GPZ(0), 5, S3C_GPIO_SFN(3));
- break;
- case 1:
- s3c_gpio_cfgpin_range(EXYNOS4_GPC0(0), 5, S3C_GPIO_SFN(3));
- break;
- case 2:
- s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 5, S3C_GPIO_SFN(3));
- break;
- default:
- printk(KERN_DEBUG "Invalid PCM Controller number!");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static struct s3c_audio_pdata s3c_pcm_pdata = {
- .cfg_gpio = exynos4_pcm_cfg_gpio,
-};
-
-static struct resource exynos4_pcm0_resource[] = {
- [0] = {
- .start = EXYNOS4_PA_PCM0,
- .end = EXYNOS4_PA_PCM0 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_PCM0_TX,
- .end = DMACH_PCM0_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_PCM0_RX,
- .end = DMACH_PCM0_RX,
- .flags = IORESOURCE_DMA,
- },
-};
-
-struct platform_device exynos4_device_pcm0 = {
- .name = "samsung-pcm",
- .id = 0,
- .num_resources = ARRAY_SIZE(exynos4_pcm0_resource),
- .resource = exynos4_pcm0_resource,
- .dev = {
- .platform_data = &s3c_pcm_pdata,
- },
-};
-
-static struct resource exynos4_pcm1_resource[] = {
- [0] = {
- .start = EXYNOS4_PA_PCM1,
- .end = EXYNOS4_PA_PCM1 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_PCM1_TX,
- .end = DMACH_PCM1_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_PCM1_RX,
- .end = DMACH_PCM1_RX,
- .flags = IORESOURCE_DMA,
- },
-};
-
-struct platform_device exynos4_device_pcm1 = {
- .name = "samsung-pcm",
- .id = 1,
- .num_resources = ARRAY_SIZE(exynos4_pcm1_resource),
- .resource = exynos4_pcm1_resource,
- .dev = {
- .platform_data = &s3c_pcm_pdata,
- },
-};
-
-static struct resource exynos4_pcm2_resource[] = {
- [0] = {
- .start = EXYNOS4_PA_PCM2,
- .end = EXYNOS4_PA_PCM2 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_PCM2_TX,
- .end = DMACH_PCM2_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_PCM2_RX,
- .end = DMACH_PCM2_RX,
- .flags = IORESOURCE_DMA,
- },
-};
-
-struct platform_device exynos4_device_pcm2 = {
- .name = "samsung-pcm",
- .id = 2,
- .num_resources = ARRAY_SIZE(exynos4_pcm2_resource),
- .resource = exynos4_pcm2_resource,
- .dev = {
- .platform_data = &s3c_pcm_pdata,
- },
-};
-
-/* AC97 Controller platform devices */
-
-static int exynos4_ac97_cfg_gpio(struct platform_device *pdev)
-{
- return s3c_gpio_cfgpin_range(EXYNOS4_GPC0(0), 5, S3C_GPIO_SFN(4));
-}
-
-static struct resource exynos4_ac97_resource[] = {
- [0] = {
- .start = EXYNOS4_PA_AC97,
- .end = EXYNOS4_PA_AC97 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_AC97_PCMOUT,
- .end = DMACH_AC97_PCMOUT,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_AC97_PCMIN,
- .end = DMACH_AC97_PCMIN,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .start = DMACH_AC97_MICIN,
- .end = DMACH_AC97_MICIN,
- .flags = IORESOURCE_DMA,
- },
- [4] = {
- .start = IRQ_AC97,
- .end = IRQ_AC97,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct s3c_audio_pdata s3c_ac97_pdata = {
- .cfg_gpio = exynos4_ac97_cfg_gpio,
-};
-
-static u64 exynos4_ac97_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device exynos4_device_ac97 = {
- .name = "samsung-ac97",
- .id = -1,
- .num_resources = ARRAY_SIZE(exynos4_ac97_resource),
- .resource = exynos4_ac97_resource,
- .dev = {
- .platform_data = &s3c_ac97_pdata,
- .dma_mask = &exynos4_ac97_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-/* S/PDIF Controller platform_device */
-
-static int exynos4_spdif_cfg_gpio(struct platform_device *pdev)
-{
- s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 2, S3C_GPIO_SFN(4));
-
- return 0;
-}
-
-static struct resource exynos4_spdif_resource[] = {
- [0] = {
- .start = EXYNOS4_PA_SPDIF,
- .end = EXYNOS4_PA_SPDIF + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_SPDIF,
- .end = DMACH_SPDIF,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static struct s3c_audio_pdata samsung_spdif_pdata = {
- .cfg_gpio = exynos4_spdif_cfg_gpio,
-};
-
-static u64 exynos4_spdif_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device exynos4_device_spdif = {
- .name = "samsung-spdif",
- .id = -1,
- .num_resources = ARRAY_SIZE(exynos4_spdif_resource),
- .resource = exynos4_spdif_resource,
- .dev = {
- .platform_data = &samsung_spdif_pdata,
- .dma_mask = &exynos4_spdif_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
+++ /dev/null
-/*
- * linux/arch/arm/mach-exynos4/dev-dwmci.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Platform device for Synopsys DesignWare Mobile Storage IP
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/mmc/dw_mmc.h>
-
-#include <plat/devs.h>
-
-#include <mach/map.h>
-
-static int exynos4_dwmci_get_bus_wd(u32 slot_id)
-{
- return 4;
-}
-
-static int exynos4_dwmci_init(u32 slot_id, irq_handler_t handler, void *data)
-{
- return 0;
-}
-
-static struct resource exynos4_dwmci_resource[] = {
- [0] = {
- .start = EXYNOS4_PA_DWMCI,
- .end = EXYNOS4_PA_DWMCI + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_DWMCI,
- .end = IRQ_DWMCI,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct dw_mci_board exynos4_dwci_pdata = {
- .num_slots = 1,
- .quirks = DW_MCI_QUIRK_BROKEN_CARD_DETECTION,
- .bus_hz = 80 * 1000 * 1000,
- .detect_delay_ms = 200,
- .init = exynos4_dwmci_init,
- .get_bus_wd = exynos4_dwmci_get_bus_wd,
-};
-
-static u64 exynos4_dwmci_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device exynos4_device_dwmci = {
- .name = "dw_mmc",
- .id = -1,
- .num_resources = ARRAY_SIZE(exynos4_dwmci_resource),
- .resource = exynos4_dwmci_resource,
- .dev = {
- .dma_mask = &exynos4_dwmci_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &exynos4_dwci_pdata,
- },
-};
-
-void __init exynos4_dwmci_set_platdata(struct dw_mci_board *pd)
-{
- struct dw_mci_board *npd;
-
- npd = s3c_set_platdata(pd, sizeof(struct dw_mci_board),
- &exynos4_device_dwmci);
-
- if (!npd->init)
- npd->init = exynos4_dwmci_init;
- if (!npd->get_bus_wd)
- npd->get_bus_wd = exynos4_dwmci_get_bus_wd;
-}
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/dev-pd.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - Power Domain support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-
-#include <mach/regs-pmu.h>
-
-#include <plat/pd.h>
-
-static int exynos4_pd_enable(struct device *dev)
-{
- struct samsung_pd_info *pdata = dev->platform_data;
- u32 timeout;
-
- __raw_writel(S5P_INT_LOCAL_PWR_EN, pdata->base);
-
- /* Wait max 1ms */
- timeout = 10;
- while ((__raw_readl(pdata->base + 0x4) & S5P_INT_LOCAL_PWR_EN)
- != S5P_INT_LOCAL_PWR_EN) {
- if (timeout == 0) {
- printk(KERN_ERR "Power domain %s enable failed.\n",
- dev_name(dev));
- return -ETIMEDOUT;
- }
- timeout--;
- udelay(100);
- }
-
- return 0;
-}
-
-static int exynos4_pd_disable(struct device *dev)
-{
- struct samsung_pd_info *pdata = dev->platform_data;
- u32 timeout;
-
- __raw_writel(0, pdata->base);
-
- /* Wait max 1ms */
- timeout = 10;
- while (__raw_readl(pdata->base + 0x4) & S5P_INT_LOCAL_PWR_EN) {
- if (timeout == 0) {
- printk(KERN_ERR "Power domain %s disable failed.\n",
- dev_name(dev));
- return -ETIMEDOUT;
- }
- timeout--;
- udelay(100);
- }
-
- return 0;
-}
-
-struct platform_device exynos4_device_pd[] = {
- {
- .name = "samsung-pd",
- .id = 0,
- .dev = {
- .platform_data = &(struct samsung_pd_info) {
- .enable = exynos4_pd_enable,
- .disable = exynos4_pd_disable,
- .base = S5P_PMU_MFC_CONF,
- },
- },
- }, {
- .name = "samsung-pd",
- .id = 1,
- .dev = {
- .platform_data = &(struct samsung_pd_info) {
- .enable = exynos4_pd_enable,
- .disable = exynos4_pd_disable,
- .base = S5P_PMU_G3D_CONF,
- },
- },
- }, {
- .name = "samsung-pd",
- .id = 2,
- .dev = {
- .platform_data = &(struct samsung_pd_info) {
- .enable = exynos4_pd_enable,
- .disable = exynos4_pd_disable,
- .base = S5P_PMU_LCD0_CONF,
- },
- },
- }, {
- .name = "samsung-pd",
- .id = 3,
- .dev = {
- .platform_data = &(struct samsung_pd_info) {
- .enable = exynos4_pd_enable,
- .disable = exynos4_pd_disable,
- .base = S5P_PMU_LCD1_CONF,
- },
- },
- }, {
- .name = "samsung-pd",
- .id = 4,
- .dev = {
- .platform_data = &(struct samsung_pd_info) {
- .enable = exynos4_pd_enable,
- .disable = exynos4_pd_disable,
- .base = S5P_PMU_TV_CONF,
- },
- },
- }, {
- .name = "samsung-pd",
- .id = 5,
- .dev = {
- .platform_data = &(struct samsung_pd_info) {
- .enable = exynos4_pd_enable,
- .disable = exynos4_pd_disable,
- .base = S5P_PMU_CAM_CONF,
- },
- },
- }, {
- .name = "samsung-pd",
- .id = 6,
- .dev = {
- .platform_data = &(struct samsung_pd_info) {
- .enable = exynos4_pd_enable,
- .disable = exynos4_pd_disable,
- .base = S5P_PMU_GPS_CONF,
- },
- },
- },
-};
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/dev-sysmmu.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - System MMU support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <mach/sysmmu.h>
-#include <plat/s5p-clock.h>
-
-/* These names must be equal to the clock names in mach-exynos4/clock.c */
-const char *sysmmu_ips_name[EXYNOS4_SYSMMU_TOTAL_IPNUM] = {
- "SYSMMU_MDMA" ,
- "SYSMMU_SSS" ,
- "SYSMMU_FIMC0" ,
- "SYSMMU_FIMC1" ,
- "SYSMMU_FIMC2" ,
- "SYSMMU_FIMC3" ,
- "SYSMMU_JPEG" ,
- "SYSMMU_FIMD0" ,
- "SYSMMU_FIMD1" ,
- "SYSMMU_PCIe" ,
- "SYSMMU_G2D" ,
- "SYSMMU_ROTATOR",
- "SYSMMU_MDMA2" ,
- "SYSMMU_TV" ,
- "SYSMMU_MFC_L" ,
- "SYSMMU_MFC_R" ,
-};
-
-static struct resource exynos4_sysmmu_resource[] = {
- [0] = {
- .start = EXYNOS4_PA_SYSMMU_MDMA,
- .end = EXYNOS4_PA_SYSMMU_MDMA + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_SYSMMU_MDMA0_0,
- .end = IRQ_SYSMMU_MDMA0_0,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = EXYNOS4_PA_SYSMMU_SSS,
- .end = EXYNOS4_PA_SYSMMU_SSS + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [3] = {
- .start = IRQ_SYSMMU_SSS_0,
- .end = IRQ_SYSMMU_SSS_0,
- .flags = IORESOURCE_IRQ,
- },
- [4] = {
- .start = EXYNOS4_PA_SYSMMU_FIMC0,
- .end = EXYNOS4_PA_SYSMMU_FIMC0 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [5] = {
- .start = IRQ_SYSMMU_FIMC0_0,
- .end = IRQ_SYSMMU_FIMC0_0,
- .flags = IORESOURCE_IRQ,
- },
- [6] = {
- .start = EXYNOS4_PA_SYSMMU_FIMC1,
- .end = EXYNOS4_PA_SYSMMU_FIMC1 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [7] = {
- .start = IRQ_SYSMMU_FIMC1_0,
- .end = IRQ_SYSMMU_FIMC1_0,
- .flags = IORESOURCE_IRQ,
- },
- [8] = {
- .start = EXYNOS4_PA_SYSMMU_FIMC2,
- .end = EXYNOS4_PA_SYSMMU_FIMC2 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [9] = {
- .start = IRQ_SYSMMU_FIMC2_0,
- .end = IRQ_SYSMMU_FIMC2_0,
- .flags = IORESOURCE_IRQ,
- },
- [10] = {
- .start = EXYNOS4_PA_SYSMMU_FIMC3,
- .end = EXYNOS4_PA_SYSMMU_FIMC3 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [11] = {
- .start = IRQ_SYSMMU_FIMC3_0,
- .end = IRQ_SYSMMU_FIMC3_0,
- .flags = IORESOURCE_IRQ,
- },
- [12] = {
- .start = EXYNOS4_PA_SYSMMU_JPEG,
- .end = EXYNOS4_PA_SYSMMU_JPEG + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [13] = {
- .start = IRQ_SYSMMU_JPEG_0,
- .end = IRQ_SYSMMU_JPEG_0,
- .flags = IORESOURCE_IRQ,
- },
- [14] = {
- .start = EXYNOS4_PA_SYSMMU_FIMD0,
- .end = EXYNOS4_PA_SYSMMU_FIMD0 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [15] = {
- .start = IRQ_SYSMMU_LCD0_M0_0,
- .end = IRQ_SYSMMU_LCD0_M0_0,
- .flags = IORESOURCE_IRQ,
- },
- [16] = {
- .start = EXYNOS4_PA_SYSMMU_FIMD1,
- .end = EXYNOS4_PA_SYSMMU_FIMD1 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [17] = {
- .start = IRQ_SYSMMU_LCD1_M1_0,
- .end = IRQ_SYSMMU_LCD1_M1_0,
- .flags = IORESOURCE_IRQ,
- },
- [18] = {
- .start = EXYNOS4_PA_SYSMMU_PCIe,
- .end = EXYNOS4_PA_SYSMMU_PCIe + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [19] = {
- .start = IRQ_SYSMMU_PCIE_0,
- .end = IRQ_SYSMMU_PCIE_0,
- .flags = IORESOURCE_IRQ,
- },
- [20] = {
- .start = EXYNOS4_PA_SYSMMU_G2D,
- .end = EXYNOS4_PA_SYSMMU_G2D + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [21] = {
- .start = IRQ_SYSMMU_2D_0,
- .end = IRQ_SYSMMU_2D_0,
- .flags = IORESOURCE_IRQ,
- },
- [22] = {
- .start = EXYNOS4_PA_SYSMMU_ROTATOR,
- .end = EXYNOS4_PA_SYSMMU_ROTATOR + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [23] = {
- .start = IRQ_SYSMMU_ROTATOR_0,
- .end = IRQ_SYSMMU_ROTATOR_0,
- .flags = IORESOURCE_IRQ,
- },
- [24] = {
- .start = EXYNOS4_PA_SYSMMU_MDMA2,
- .end = EXYNOS4_PA_SYSMMU_MDMA2 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [25] = {
- .start = IRQ_SYSMMU_MDMA1_0,
- .end = IRQ_SYSMMU_MDMA1_0,
- .flags = IORESOURCE_IRQ,
- },
- [26] = {
- .start = EXYNOS4_PA_SYSMMU_TV,
- .end = EXYNOS4_PA_SYSMMU_TV + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [27] = {
- .start = IRQ_SYSMMU_TV_M0_0,
- .end = IRQ_SYSMMU_TV_M0_0,
- .flags = IORESOURCE_IRQ,
- },
- [28] = {
- .start = EXYNOS4_PA_SYSMMU_MFC_L,
- .end = EXYNOS4_PA_SYSMMU_MFC_L + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [29] = {
- .start = IRQ_SYSMMU_MFC_M0_0,
- .end = IRQ_SYSMMU_MFC_M0_0,
- .flags = IORESOURCE_IRQ,
- },
- [30] = {
- .start = EXYNOS4_PA_SYSMMU_MFC_R,
- .end = EXYNOS4_PA_SYSMMU_MFC_R + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [31] = {
- .start = IRQ_SYSMMU_MFC_M1_0,
- .end = IRQ_SYSMMU_MFC_M1_0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device exynos4_device_sysmmu = {
- .name = "s5p-sysmmu",
- .id = 32,
- .num_resources = ARRAY_SIZE(exynos4_sysmmu_resource),
- .resource = exynos4_sysmmu_resource,
-};
-EXPORT_SYMBOL(exynos4_device_sysmmu);
-
-static struct clk *sysmmu_clk[S5P_SYSMMU_TOTAL_IPNUM];
-void sysmmu_clk_init(struct device *dev, sysmmu_ips ips)
-{
- sysmmu_clk[ips] = clk_get(dev, sysmmu_ips_name[ips]);
- if (IS_ERR(sysmmu_clk[ips]))
- sysmmu_clk[ips] = NULL;
- else
- clk_put(sysmmu_clk[ips]);
-}
-
-void sysmmu_clk_enable(sysmmu_ips ips)
-{
- if (sysmmu_clk[ips])
- clk_enable(sysmmu_clk[ips]);
-}
-
-void sysmmu_clk_disable(sysmmu_ips ips)
-{
- if (sysmmu_clk[ips])
- clk_disable(sysmmu_clk[ips]);
-}
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/dma.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl330.h>
-
-#include <asm/irq.h>
-#include <plat/devs.h>
-#include <plat/irqs.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <mach/dma.h>
-
-static u64 dma_dmamask = DMA_BIT_MASK(32);
-
-struct dma_pl330_peri pdma0_peri[28] = {
- {
- .peri_id = (u8)DMACH_PCM0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_PCM0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_PCM2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_PCM2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_MSM_REQ0,
- }, {
- .peri_id = (u8)DMACH_MSM_REQ2,
- }, {
- .peri_id = (u8)DMACH_SPI0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S0S_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART4_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART4_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS4_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS4_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_AC97_MICIN,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_AC97_PCMIN,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_AC97_PCMOUT,
- .rqtype = MEMTODEV,
- },
-};
-
-struct dma_pl330_platdata exynos4_pdma0_pdata = {
- .nr_valid_peri = ARRAY_SIZE(pdma0_peri),
- .peri = pdma0_peri,
-};
-
-struct amba_device exynos4_device_pdma0 = {
- .dev = {
- .init_name = "dma-pl330.0",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &exynos4_pdma0_pdata,
- },
- .res = {
- .start = EXYNOS4_PA_PDMA0,
- .end = EXYNOS4_PA_PDMA0 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_PDMA0, NO_IRQ},
- .periphid = 0x00041330,
-};
-
-struct dma_pl330_peri pdma1_peri[25] = {
- {
- .peri_id = (u8)DMACH_PCM0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_PCM0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_PCM1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_PCM1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_MSM_REQ1,
- }, {
- .peri_id = (u8)DMACH_MSM_REQ3,
- }, {
- .peri_id = (u8)DMACH_SPI1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S0S_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART3_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART3_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS3_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS3_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS5_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS5_TX,
- .rqtype = MEMTODEV,
- },
-};
-
-struct dma_pl330_platdata exynos4_pdma1_pdata = {
- .nr_valid_peri = ARRAY_SIZE(pdma1_peri),
- .peri = pdma1_peri,
-};
-
-struct amba_device exynos4_device_pdma1 = {
- .dev = {
- .init_name = "dma-pl330.1",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &exynos4_pdma1_pdata,
- },
- .res = {
- .start = EXYNOS4_PA_PDMA1,
- .end = EXYNOS4_PA_PDMA1 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_PDMA1, NO_IRQ},
- .periphid = 0x00041330,
-};
-
-static int __init exynos4_dma_init(void)
-{
- amba_device_register(&exynos4_device_pdma0, &iomem_resource);
-
- return 0;
-}
-arch_initcall(exynos4_dma_init);
+++ /dev/null
-/*
- * linux/arch/arm/mach-exynos4/headsmp.S
- *
- * Cloned from linux/arch/arm/mach-realview/headsmp.S
- *
- * Copyright (c) 2003 ARM Limited
- * All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-
- __CPUINIT
-
-/*
- * exynos4 specific entry point for secondary CPUs. This provides
- * a "holding pen" into which all secondary cores are held until we're
- * ready for them to initialise.
- */
-ENTRY(exynos4_secondary_startup)
- mrc p15, 0, r0, c0, c0, 5
- and r0, r0, #15
- adr r4, 1f
- ldmia r4, {r5, r6}
- sub r4, r4, r5
- add r6, r6, r4
-pen: ldr r7, [r6]
- cmp r7, r0
- bne pen
-
- /*
- * we've been released from the holding pen: secondary_stack
- * should now contain the SVC stack for this core
- */
- b secondary_startup
-
-1: .long .
- .long pen_release
+++ /dev/null
-/* linux arch/arm/mach-exynos4/hotplug.c
- *
- * Cloned from linux/arch/arm/mach-realview/hotplug.c
- *
- * Copyright (C) 2002 ARM Ltd.
- * All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-
-#include <asm/cacheflush.h>
-
-#include <mach/regs-pmu.h>
-
-extern volatile int pen_release;
-
-static inline void cpu_enter_lowpower(void)
-{
- unsigned int v;
-
- flush_cache_all();
- asm volatile(
- " mcr p15, 0, %1, c7, c5, 0\n"
- " mcr p15, 0, %1, c7, c10, 4\n"
- /*
- * Turn off coherency
- */
- " mrc p15, 0, %0, c1, c0, 1\n"
- " bic %0, %0, %3\n"
- " mcr p15, 0, %0, c1, c0, 1\n"
- " mrc p15, 0, %0, c1, c0, 0\n"
- " bic %0, %0, %2\n"
- " mcr p15, 0, %0, c1, c0, 0\n"
- : "=&r" (v)
- : "r" (0), "Ir" (CR_C), "Ir" (0x40)
- : "cc");
-}
-
-static inline void cpu_leave_lowpower(void)
-{
- unsigned int v;
-
- asm volatile(
- "mrc p15, 0, %0, c1, c0, 0\n"
- " orr %0, %0, %1\n"
- " mcr p15, 0, %0, c1, c0, 0\n"
- " mrc p15, 0, %0, c1, c0, 1\n"
- " orr %0, %0, %2\n"
- " mcr p15, 0, %0, c1, c0, 1\n"
- : "=&r" (v)
- : "Ir" (CR_C), "Ir" (0x40)
- : "cc");
-}
-
-static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
-{
- for (;;) {
-
- /* make cpu1 to be turned off at next WFI command */
- if (cpu == 1)
- __raw_writel(0, S5P_ARM_CORE1_CONFIGURATION);
-
- /*
- * here's the WFI
- */
- asm(".word 0xe320f003\n"
- :
- :
- : "memory", "cc");
-
- if (pen_release == cpu_logical_map(cpu)) {
- /*
- * OK, proper wakeup, we're done
- */
- break;
- }
-
- /*
- * Getting here, means that we have come out of WFI without
- * having been woken up - this shouldn't happen
- *
- * Just note it happening - when we're woken, we can report
- * its occurrence.
- */
- (*spurious)++;
- }
-}
-
-int platform_cpu_kill(unsigned int cpu)
-{
- return 1;
-}
-
-/*
- * platform-specific code to shutdown a CPU
- *
- * Called with IRQs disabled
- */
-void platform_cpu_die(unsigned int cpu)
-{
- int spurious = 0;
-
- /*
- * we're ready for shutdown now, so do it
- */
- cpu_enter_lowpower();
- platform_do_lowpower(cpu, &spurious);
-
- /*
- * bring this CPU back into the world of cache
- * coherency, and then restore interrupts
- */
- cpu_leave_lowpower();
-
- if (spurious)
- pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
-}
-
-int platform_cpu_disable(unsigned int cpu)
-{
- /*
- * we don't allow CPU 0 to be shutdown (it is still too special
- * e.g. clock tick interrupts)
- */
- return cpu == 0 ? -EPERM : 0;
-}
+++ /dev/null
-#ifndef __MACH_CLKDEV_H__
-#define __MACH_CLKDEV_H__
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do {} while (0)
-
-#endif
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/include/mach/debug-macro.S
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* pull in the relevant register and map files. */
-
-#include <mach/map.h>
-
- /* note, for the boot process to work we have to keep the UART
- * virtual address aligned to an 1MiB boundary for the L1
- * mapping the head code makes. We keep the UART virtual address
- * aligned and add in the offset when we load the value here.
- */
-
- .macro addruart, rp, rv, tmp
- ldr \rp, = S3C_PA_UART
- ldr \rv, = S3C_VA_UART
-#if CONFIG_DEBUG_S3C_UART != 0
- add \rp, \rp, #(0x10000 * CONFIG_DEBUG_S3C_UART)
- add \rv, \rv, #(0x10000 * CONFIG_DEBUG_S3C_UART)
-#endif
- .endm
-
-#define fifo_full fifo_full_s5pv210
-#define fifo_level fifo_level_s5pv210
-
-#include <plat/debug-macro.S>
+++ /dev/null
-/*
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __MACH_DMA_H
-#define __MACH_DMA_H
-
-/* This platform uses the common DMA API driver for PL330 */
-#include <plat/dma-pl330.h>
-
-#endif /* __MACH_DMA_H */
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/include/mach/dwmci.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Synopsys DesignWare Mobile Storage for EXYNOS4210
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARM_ARCH_DWMCI_H
-#define __ASM_ARM_ARCH_DWMCI_H __FILE__
-
-#include <linux/mmc/dw_mmc.h>
-
-extern void exynos4_dwmci_set_platdata(struct dw_mci_board *pd);
-
-#endif /* __ASM_ARM_ARCH_DWMCI_H */
+++ /dev/null
-/* arch/arm/mach-exynos4/include/mach/entry-macro.S
- *
- * Cloned from arch/arm/mach-realview/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for EXYNOS4 platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <asm/hardware/gic.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- mov \tmp, #0
-
- mrc p15, 0, \base, c0, c0, 5
- and \base, \base, #3
- cmp \base, #0
- beq 1f
-
- ldr \tmp, =gic_bank_offset
- ldr \tmp, [\tmp]
- cmp \base, #1
- beq 1f
-
- cmp \base, #2
- addeq \tmp, \tmp, \tmp
- addne \tmp, \tmp, \tmp, LSL #1
-
-1: ldr \base, =gic_cpu_base_addr
- ldr \base, [\base]
- add \base, \base, \tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- /*
- * The interrupt numbering scheme is defined in the
- * interrupt controller spec. To wit:
- *
- * Interrupts 0-15 are IPI
- * 16-28 are reserved
- * 29-31 are local. We allow 30 to be used for the watchdog.
- * 32-1020 are global
- * 1021-1022 are reserved
- * 1023 is "spurious" (no interrupt)
- *
- * For now, we ignore all local interrupts so only return an interrupt if it's
- * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs.
- *
- * A simple read from the controller will tell us the number of the highest
- * priority enabled interrupt. We then just need to check whether it is in the
- * valid range for an IRQ (30-1020 inclusive).
- */
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
-
- ldr \tmp, =1021
-
- bic \irqnr, \irqstat, #0x1c00
-
- cmp \irqnr, #15
- cmpcc \irqnr, \irqnr
- cmpne \irqnr, \tmp
- cmpcs \irqnr, \irqnr
- addne \irqnr, \irqnr, #32
-
- .endm
-
- /* We assume that irqstat (the raw value of the IRQ acknowledge
- * register) is preserved from the macro above.
- * If there is an IPI, we immediately signal end of interrupt on the
- * controller, since this requires the original irqstat value which
- * we won't easily be able to recreate later.
- */
-
- .macro test_for_ipi, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #16
- strcc \irqstat, [\base, #GIC_CPU_EOI]
- cmpcs \irqnr, \irqnr
- .endm
+++ /dev/null
-/*
- * linux/arch/arm/mach-exynos4/include/mach/exynos4-clock.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Header file for exynos4 clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_CLOCK_H
-#define __ASM_ARCH_CLOCK_H __FILE__
-
-#include <linux/clk.h>
-
-extern struct clk clk_sclk_hdmi27m;
-extern struct clk clk_sclk_usbphy0;
-extern struct clk clk_sclk_usbphy1;
-extern struct clk clk_sclk_hdmiphy;
-
-extern struct clksrc_clk clk_sclk_apll;
-extern struct clksrc_clk clk_mout_mpll;
-extern struct clksrc_clk clk_aclk_133;
-extern struct clksrc_clk clk_mout_epll;
-extern struct clksrc_clk clk_sclk_vpll;
-
-extern struct clk *clkset_corebus_list[];
-extern struct clksrc_sources clkset_mout_corebus;
-
-extern struct clk *clkset_aclk_top_list[];
-extern struct clksrc_sources clkset_aclk;
-
-extern struct clk *clkset_group_list[];
-extern struct clksrc_sources clkset_group;
-
-extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable);
-
-#endif /* __ASM_ARCH_CLOCK_H */
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/include/mach/gpio.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - GPIO lib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H __FILE__
-
-/* Practically, GPIO banks up to GPZ are the configurable gpio banks */
-
-/* GPIO bank sizes */
-#define EXYNOS4_GPIO_A0_NR (8)
-#define EXYNOS4_GPIO_A1_NR (6)
-#define EXYNOS4_GPIO_B_NR (8)
-#define EXYNOS4_GPIO_C0_NR (5)
-#define EXYNOS4_GPIO_C1_NR (5)
-#define EXYNOS4_GPIO_D0_NR (4)
-#define EXYNOS4_GPIO_D1_NR (4)
-#define EXYNOS4_GPIO_E0_NR (5)
-#define EXYNOS4_GPIO_E1_NR (8)
-#define EXYNOS4_GPIO_E2_NR (6)
-#define EXYNOS4_GPIO_E3_NR (8)
-#define EXYNOS4_GPIO_E4_NR (8)
-#define EXYNOS4_GPIO_F0_NR (8)
-#define EXYNOS4_GPIO_F1_NR (8)
-#define EXYNOS4_GPIO_F2_NR (8)
-#define EXYNOS4_GPIO_F3_NR (6)
-#define EXYNOS4_GPIO_J0_NR (8)
-#define EXYNOS4_GPIO_J1_NR (5)
-#define EXYNOS4_GPIO_K0_NR (7)
-#define EXYNOS4_GPIO_K1_NR (7)
-#define EXYNOS4_GPIO_K2_NR (7)
-#define EXYNOS4_GPIO_K3_NR (7)
-#define EXYNOS4_GPIO_L0_NR (8)
-#define EXYNOS4_GPIO_L1_NR (3)
-#define EXYNOS4_GPIO_L2_NR (8)
-#define EXYNOS4_GPIO_X0_NR (8)
-#define EXYNOS4_GPIO_X1_NR (8)
-#define EXYNOS4_GPIO_X2_NR (8)
-#define EXYNOS4_GPIO_X3_NR (8)
-#define EXYNOS4_GPIO_Y0_NR (6)
-#define EXYNOS4_GPIO_Y1_NR (4)
-#define EXYNOS4_GPIO_Y2_NR (6)
-#define EXYNOS4_GPIO_Y3_NR (8)
-#define EXYNOS4_GPIO_Y4_NR (8)
-#define EXYNOS4_GPIO_Y5_NR (8)
-#define EXYNOS4_GPIO_Y6_NR (8)
-#define EXYNOS4_GPIO_Z_NR (7)
-
-/* GPIO bank numbers */
-
-#define EXYNOS4_GPIO_NEXT(__gpio) \
- ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
-
-enum s5p_gpio_number {
- EXYNOS4_GPIO_A0_START = 0,
- EXYNOS4_GPIO_A1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_A0),
- EXYNOS4_GPIO_B_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_A1),
- EXYNOS4_GPIO_C0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_B),
- EXYNOS4_GPIO_C1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_C0),
- EXYNOS4_GPIO_D0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_C1),
- EXYNOS4_GPIO_D1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_D0),
- EXYNOS4_GPIO_E0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_D1),
- EXYNOS4_GPIO_E1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E0),
- EXYNOS4_GPIO_E2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E1),
- EXYNOS4_GPIO_E3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E2),
- EXYNOS4_GPIO_E4_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E3),
- EXYNOS4_GPIO_F0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E4),
- EXYNOS4_GPIO_F1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F0),
- EXYNOS4_GPIO_F2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F1),
- EXYNOS4_GPIO_F3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F2),
- EXYNOS4_GPIO_J0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F3),
- EXYNOS4_GPIO_J1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_J0),
- EXYNOS4_GPIO_K0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_J1),
- EXYNOS4_GPIO_K1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K0),
- EXYNOS4_GPIO_K2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K1),
- EXYNOS4_GPIO_K3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K2),
- EXYNOS4_GPIO_L0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K3),
- EXYNOS4_GPIO_L1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_L0),
- EXYNOS4_GPIO_L2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_L1),
- EXYNOS4_GPIO_X0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_L2),
- EXYNOS4_GPIO_X1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X0),
- EXYNOS4_GPIO_X2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X1),
- EXYNOS4_GPIO_X3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X2),
- EXYNOS4_GPIO_Y0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X3),
- EXYNOS4_GPIO_Y1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y0),
- EXYNOS4_GPIO_Y2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y1),
- EXYNOS4_GPIO_Y3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y2),
- EXYNOS4_GPIO_Y4_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y3),
- EXYNOS4_GPIO_Y5_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y4),
- EXYNOS4_GPIO_Y6_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y5),
- EXYNOS4_GPIO_Z_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y6),
-};
-
-/* EXYNOS4 GPIO number definitions */
-#define EXYNOS4_GPA0(_nr) (EXYNOS4_GPIO_A0_START + (_nr))
-#define EXYNOS4_GPA1(_nr) (EXYNOS4_GPIO_A1_START + (_nr))
-#define EXYNOS4_GPB(_nr) (EXYNOS4_GPIO_B_START + (_nr))
-#define EXYNOS4_GPC0(_nr) (EXYNOS4_GPIO_C0_START + (_nr))
-#define EXYNOS4_GPC1(_nr) (EXYNOS4_GPIO_C1_START + (_nr))
-#define EXYNOS4_GPD0(_nr) (EXYNOS4_GPIO_D0_START + (_nr))
-#define EXYNOS4_GPD1(_nr) (EXYNOS4_GPIO_D1_START + (_nr))
-#define EXYNOS4_GPE0(_nr) (EXYNOS4_GPIO_E0_START + (_nr))
-#define EXYNOS4_GPE1(_nr) (EXYNOS4_GPIO_E1_START + (_nr))
-#define EXYNOS4_GPE2(_nr) (EXYNOS4_GPIO_E2_START + (_nr))
-#define EXYNOS4_GPE3(_nr) (EXYNOS4_GPIO_E3_START + (_nr))
-#define EXYNOS4_GPE4(_nr) (EXYNOS4_GPIO_E4_START + (_nr))
-#define EXYNOS4_GPF0(_nr) (EXYNOS4_GPIO_F0_START + (_nr))
-#define EXYNOS4_GPF1(_nr) (EXYNOS4_GPIO_F1_START + (_nr))
-#define EXYNOS4_GPF2(_nr) (EXYNOS4_GPIO_F2_START + (_nr))
-#define EXYNOS4_GPF3(_nr) (EXYNOS4_GPIO_F3_START + (_nr))
-#define EXYNOS4_GPJ0(_nr) (EXYNOS4_GPIO_J0_START + (_nr))
-#define EXYNOS4_GPJ1(_nr) (EXYNOS4_GPIO_J1_START + (_nr))
-#define EXYNOS4_GPK0(_nr) (EXYNOS4_GPIO_K0_START + (_nr))
-#define EXYNOS4_GPK1(_nr) (EXYNOS4_GPIO_K1_START + (_nr))
-#define EXYNOS4_GPK2(_nr) (EXYNOS4_GPIO_K2_START + (_nr))
-#define EXYNOS4_GPK3(_nr) (EXYNOS4_GPIO_K3_START + (_nr))
-#define EXYNOS4_GPL0(_nr) (EXYNOS4_GPIO_L0_START + (_nr))
-#define EXYNOS4_GPL1(_nr) (EXYNOS4_GPIO_L1_START + (_nr))
-#define EXYNOS4_GPL2(_nr) (EXYNOS4_GPIO_L2_START + (_nr))
-#define EXYNOS4_GPX0(_nr) (EXYNOS4_GPIO_X0_START + (_nr))
-#define EXYNOS4_GPX1(_nr) (EXYNOS4_GPIO_X1_START + (_nr))
-#define EXYNOS4_GPX2(_nr) (EXYNOS4_GPIO_X2_START + (_nr))
-#define EXYNOS4_GPX3(_nr) (EXYNOS4_GPIO_X3_START + (_nr))
-#define EXYNOS4_GPY0(_nr) (EXYNOS4_GPIO_Y0_START + (_nr))
-#define EXYNOS4_GPY1(_nr) (EXYNOS4_GPIO_Y1_START + (_nr))
-#define EXYNOS4_GPY2(_nr) (EXYNOS4_GPIO_Y2_START + (_nr))
-#define EXYNOS4_GPY3(_nr) (EXYNOS4_GPIO_Y3_START + (_nr))
-#define EXYNOS4_GPY4(_nr) (EXYNOS4_GPIO_Y4_START + (_nr))
-#define EXYNOS4_GPY5(_nr) (EXYNOS4_GPIO_Y5_START + (_nr))
-#define EXYNOS4_GPY6(_nr) (EXYNOS4_GPIO_Y6_START + (_nr))
-#define EXYNOS4_GPZ(_nr) (EXYNOS4_GPIO_Z_START + (_nr))
-
-/* the end of the EXYNOS4 specific gpios */
-#define EXYNOS4_GPIO_END (EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) + 1)
-#define S3C_GPIO_END EXYNOS4_GPIO_END
-
-/* define the number of gpios we need to the one after the GPZ() range */
-#define ARCH_NR_GPIOS (EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) + \
- CONFIG_SAMSUNG_GPIO_EXTRA + 1)
-
-#endif /* __ASM_ARCH_GPIO_H */
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/include/mach/hardware.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - Hardware support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H __FILE__
-
-/* currently nothing here, placeholder */
-
-#endif /* __ASM_ARCH_HARDWARE_H */
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/include/mach/io.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright 2008-2010 Ben Dooks <ben-linux@fluff.org>
- *
- * Based on arch/arm/mach-s5p6442/include/mach/io.h
- *
- * Default IO routines for EXYNOS4
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H __FILE__
-
-/* No current ISA/PCI bus support. */
-#define __io(a) __typesafe_io(a)
-#define __mem_pci(a) (a)
-
-#define IO_SPACE_LIMIT (0xFFFFFFFF)
-
-#endif /* __ASM_ARM_ARCH_IO_H */
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/include/mach/irqs.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - IRQ definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H __FILE__
-
-#include <plat/irqs.h>
-
-/* PPI: Private Peripheral Interrupt */
-
-#define IRQ_PPI(x) S5P_IRQ(x+16)
-
-#define IRQ_MCT_LOCALTIMER IRQ_PPI(12)
-
-/* SPI: Shared Peripheral Interrupt */
-
-#define IRQ_SPI(x) S5P_IRQ(x+32)
-
-#define IRQ_EINT0 IRQ_SPI(16)
-#define IRQ_EINT1 IRQ_SPI(17)
-#define IRQ_EINT2 IRQ_SPI(18)
-#define IRQ_EINT3 IRQ_SPI(19)
-#define IRQ_EINT4 IRQ_SPI(20)
-#define IRQ_EINT5 IRQ_SPI(21)
-#define IRQ_EINT6 IRQ_SPI(22)
-#define IRQ_EINT7 IRQ_SPI(23)
-#define IRQ_EINT8 IRQ_SPI(24)
-#define IRQ_EINT9 IRQ_SPI(25)
-#define IRQ_EINT10 IRQ_SPI(26)
-#define IRQ_EINT11 IRQ_SPI(27)
-#define IRQ_EINT12 IRQ_SPI(28)
-#define IRQ_EINT13 IRQ_SPI(29)
-#define IRQ_EINT14 IRQ_SPI(30)
-#define IRQ_EINT15 IRQ_SPI(31)
-#define IRQ_EINT16_31 IRQ_SPI(32)
-
-#define IRQ_PDMA0 IRQ_SPI(35)
-#define IRQ_PDMA1 IRQ_SPI(36)
-#define IRQ_TIMER0_VIC IRQ_SPI(37)
-#define IRQ_TIMER1_VIC IRQ_SPI(38)
-#define IRQ_TIMER2_VIC IRQ_SPI(39)
-#define IRQ_TIMER3_VIC IRQ_SPI(40)
-#define IRQ_TIMER4_VIC IRQ_SPI(41)
-#define IRQ_MCT_L0 IRQ_SPI(42)
-#define IRQ_WDT IRQ_SPI(43)
-#define IRQ_RTC_ALARM IRQ_SPI(44)
-#define IRQ_RTC_TIC IRQ_SPI(45)
-#define IRQ_GPIO_XB IRQ_SPI(46)
-#define IRQ_GPIO_XA IRQ_SPI(47)
-#define IRQ_MCT_L1 IRQ_SPI(48)
-
-#define IRQ_UART0 IRQ_SPI(52)
-#define IRQ_UART1 IRQ_SPI(53)
-#define IRQ_UART2 IRQ_SPI(54)
-#define IRQ_UART3 IRQ_SPI(55)
-#define IRQ_UART4 IRQ_SPI(56)
-#define IRQ_MCT_G0 IRQ_SPI(57)
-#define IRQ_IIC IRQ_SPI(58)
-#define IRQ_IIC1 IRQ_SPI(59)
-#define IRQ_IIC2 IRQ_SPI(60)
-#define IRQ_IIC3 IRQ_SPI(61)
-#define IRQ_IIC4 IRQ_SPI(62)
-#define IRQ_IIC5 IRQ_SPI(63)
-#define IRQ_IIC6 IRQ_SPI(64)
-#define IRQ_IIC7 IRQ_SPI(65)
-
-#define IRQ_USB_HOST IRQ_SPI(70)
-#define IRQ_USB_HSOTG IRQ_SPI(71)
-#define IRQ_MODEM_IF IRQ_SPI(72)
-#define IRQ_HSMMC0 IRQ_SPI(73)
-#define IRQ_HSMMC1 IRQ_SPI(74)
-#define IRQ_HSMMC2 IRQ_SPI(75)
-#define IRQ_HSMMC3 IRQ_SPI(76)
-#define IRQ_DWMCI IRQ_SPI(77)
-
-#define IRQ_MIPI_CSIS0 IRQ_SPI(78)
-#define IRQ_MIPI_CSIS1 IRQ_SPI(80)
-
-#define IRQ_ONENAND_AUDI IRQ_SPI(82)
-#define IRQ_ROTATOR IRQ_SPI(83)
-#define IRQ_FIMC0 IRQ_SPI(84)
-#define IRQ_FIMC1 IRQ_SPI(85)
-#define IRQ_FIMC2 IRQ_SPI(86)
-#define IRQ_FIMC3 IRQ_SPI(87)
-#define IRQ_JPEG IRQ_SPI(88)
-#define IRQ_2D IRQ_SPI(89)
-#define IRQ_PCIE IRQ_SPI(90)
-
-#define IRQ_MFC IRQ_SPI(94)
-
-#define IRQ_AUDIO_SS IRQ_SPI(96)
-#define IRQ_I2S0 IRQ_SPI(97)
-#define IRQ_I2S1 IRQ_SPI(98)
-#define IRQ_I2S2 IRQ_SPI(99)
-#define IRQ_AC97 IRQ_SPI(100)
-
-#define IRQ_SPDIF IRQ_SPI(104)
-#define IRQ_ADC0 IRQ_SPI(105)
-#define IRQ_PEN0 IRQ_SPI(106)
-#define IRQ_ADC1 IRQ_SPI(107)
-#define IRQ_PEN1 IRQ_SPI(108)
-#define IRQ_KEYPAD IRQ_SPI(109)
-#define IRQ_PMU IRQ_SPI(110)
-#define IRQ_GPS IRQ_SPI(111)
-#define IRQ_INTFEEDCTRL_SSS IRQ_SPI(112)
-#define IRQ_SLIMBUS IRQ_SPI(113)
-
-#define IRQ_TSI IRQ_SPI(115)
-#define IRQ_SATA IRQ_SPI(116)
-
-#define MAX_IRQ_IN_COMBINER 8
-#define COMBINER_GROUP(x) ((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(128))
-#define COMBINER_IRQ(x, y) (COMBINER_GROUP(x) + y)
-
-#define IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(4, 0)
-#define IRQ_SYSMMU_SSS_0 COMBINER_IRQ(4, 1)
-#define IRQ_SYSMMU_FIMC0_0 COMBINER_IRQ(4, 2)
-#define IRQ_SYSMMU_FIMC1_0 COMBINER_IRQ(4, 3)
-#define IRQ_SYSMMU_FIMC2_0 COMBINER_IRQ(4, 4)
-#define IRQ_SYSMMU_FIMC3_0 COMBINER_IRQ(4, 5)
-#define IRQ_SYSMMU_JPEG_0 COMBINER_IRQ(4, 6)
-#define IRQ_SYSMMU_2D_0 COMBINER_IRQ(4, 7)
-
-#define IRQ_SYSMMU_ROTATOR_0 COMBINER_IRQ(5, 0)
-#define IRQ_SYSMMU_MDMA1_0 COMBINER_IRQ(5, 1)
-#define IRQ_SYSMMU_LCD0_M0_0 COMBINER_IRQ(5, 2)
-#define IRQ_SYSMMU_LCD1_M1_0 COMBINER_IRQ(5, 3)
-#define IRQ_SYSMMU_TV_M0_0 COMBINER_IRQ(5, 4)
-#define IRQ_SYSMMU_MFC_M0_0 COMBINER_IRQ(5, 5)
-#define IRQ_SYSMMU_MFC_M1_0 COMBINER_IRQ(5, 6)
-#define IRQ_SYSMMU_PCIE_0 COMBINER_IRQ(5, 7)
-
-#define IRQ_FIMD0_FIFO COMBINER_IRQ(11, 0)
-#define IRQ_FIMD0_VSYNC COMBINER_IRQ(11, 1)
-#define IRQ_FIMD0_SYSTEM COMBINER_IRQ(11, 2)
-
-#define MAX_COMBINER_NR 16
-
-#define IRQ_ADC IRQ_ADC0
-#define IRQ_TC IRQ_PEN0
-
-#define S5P_IRQ_EINT_BASE COMBINER_IRQ(MAX_COMBINER_NR, 0)
-
-#define S5P_EINT_BASE1 (S5P_IRQ_EINT_BASE + 0)
-#define S5P_EINT_BASE2 (S5P_IRQ_EINT_BASE + 16)
-
-/* optional GPIO interrupts */
-#define S5P_GPIOINT_BASE (S5P_IRQ_EINT_BASE + 32)
-#define IRQ_GPIO1_NR_GROUPS 16
-#define IRQ_GPIO2_NR_GROUPS 9
-#define IRQ_GPIO_END (S5P_GPIOINT_BASE + S5P_GPIOINT_COUNT)
-
-/* Set the default NR_IRQS */
-#define NR_IRQS (IRQ_GPIO_END + 64)
-
-#endif /* __ASM_ARCH_IRQS_H */
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/include/mach/map.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * EXYNOS4 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H __FILE__
-
-#include <plat/map-base.h>
-
-/*
- * EXYNOS4 UART offset is 0x10000 but the older S5P SoCs are 0x400.
- * So need to define it, and here is to avoid redefinition warning.
- */
-#define S3C_UART_OFFSET (0x10000)
-
-#include <plat/map-s5p.h>
-
-#define EXYNOS4_PA_SYSRAM0 0x02025000
-#define EXYNOS4_PA_SYSRAM1 0x02020000
-
-#define EXYNOS4_PA_FIMC0 0x11800000
-#define EXYNOS4_PA_FIMC1 0x11810000
-#define EXYNOS4_PA_FIMC2 0x11820000
-#define EXYNOS4_PA_FIMC3 0x11830000
-
-#define EXYNOS4_PA_I2S0 0x03830000
-#define EXYNOS4_PA_I2S1 0xE3100000
-#define EXYNOS4_PA_I2S2 0xE2A00000
-
-#define EXYNOS4_PA_PCM0 0x03840000
-#define EXYNOS4_PA_PCM1 0x13980000
-#define EXYNOS4_PA_PCM2 0x13990000
-
-#define EXYNOS4_PA_SROM_BANK(x) (0x04000000 + ((x) * 0x01000000))
-
-#define EXYNOS4_PA_ONENAND 0x0C000000
-#define EXYNOS4_PA_ONENAND_DMA 0x0C600000
-
-#define EXYNOS4_PA_CHIPID 0x10000000
-
-#define EXYNOS4_PA_SYSCON 0x10010000
-#define EXYNOS4_PA_PMU 0x10020000
-#define EXYNOS4_PA_CMU 0x10030000
-
-#define EXYNOS4_PA_SYSTIMER 0x10050000
-#define EXYNOS4_PA_WATCHDOG 0x10060000
-#define EXYNOS4_PA_RTC 0x10070000
-
-#define EXYNOS4_PA_KEYPAD 0x100A0000
-
-#define EXYNOS4_PA_DMC0 0x10400000
-
-#define EXYNOS4_PA_COMBINER 0x10440000
-
-#define EXYNOS4_PA_GIC_CPU 0x10480000
-#define EXYNOS4_PA_GIC_DIST 0x10490000
-
-#define EXYNOS4_PA_COREPERI 0x10500000
-#define EXYNOS4_PA_TWD 0x10500600
-#define EXYNOS4_PA_L2CC 0x10502000
-
-#define EXYNOS4_PA_MDMA 0x10810000
-#define EXYNOS4_PA_PDMA0 0x12680000
-#define EXYNOS4_PA_PDMA1 0x12690000
-
-#define EXYNOS4_PA_SYSMMU_MDMA 0x10A40000
-#define EXYNOS4_PA_SYSMMU_SSS 0x10A50000
-#define EXYNOS4_PA_SYSMMU_FIMC0 0x11A20000
-#define EXYNOS4_PA_SYSMMU_FIMC1 0x11A30000
-#define EXYNOS4_PA_SYSMMU_FIMC2 0x11A40000
-#define EXYNOS4_PA_SYSMMU_FIMC3 0x11A50000
-#define EXYNOS4_PA_SYSMMU_JPEG 0x11A60000
-#define EXYNOS4_PA_SYSMMU_FIMD0 0x11E20000
-#define EXYNOS4_PA_SYSMMU_FIMD1 0x12220000
-#define EXYNOS4_PA_SYSMMU_PCIe 0x12620000
-#define EXYNOS4_PA_SYSMMU_G2D 0x12A20000
-#define EXYNOS4_PA_SYSMMU_ROTATOR 0x12A30000
-#define EXYNOS4_PA_SYSMMU_MDMA2 0x12A40000
-#define EXYNOS4_PA_SYSMMU_TV 0x12E20000
-#define EXYNOS4_PA_SYSMMU_MFC_L 0x13620000
-#define EXYNOS4_PA_SYSMMU_MFC_R 0x13630000
-
-#define EXYNOS4_PA_GPIO1 0x11400000
-#define EXYNOS4_PA_GPIO2 0x11000000
-#define EXYNOS4_PA_GPIO3 0x03860000
-
-#define EXYNOS4_PA_MIPI_CSIS0 0x11880000
-#define EXYNOS4_PA_MIPI_CSIS1 0x11890000
-
-#define EXYNOS4_PA_FIMD0 0x11C00000
-
-#define EXYNOS4_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000))
-#define EXYNOS4_PA_DWMCI 0x12550000
-
-#define EXYNOS4_PA_SATA 0x12560000
-#define EXYNOS4_PA_SATAPHY 0x125D0000
-#define EXYNOS4_PA_SATAPHY_CTRL 0x126B0000
-
-#define EXYNOS4_PA_SROMC 0x12570000
-
-#define EXYNOS4_PA_EHCI 0x12580000
-#define EXYNOS4_PA_HSPHY 0x125B0000
-#define EXYNOS4_PA_MFC 0x13400000
-
-#define EXYNOS4_PA_UART 0x13800000
-
-#define EXYNOS4_PA_IIC(x) (0x13860000 + ((x) * 0x10000))
-
-#define EXYNOS4_PA_ADC 0x13910000
-#define EXYNOS4_PA_ADC1 0x13911000
-
-#define EXYNOS4_PA_AC97 0x139A0000
-
-#define EXYNOS4_PA_SPDIF 0x139B0000
-
-#define EXYNOS4_PA_TIMER 0x139D0000
-
-#define EXYNOS4_PA_SDRAM 0x40000000
-
-/* Compatibiltiy Defines */
-
-#define S3C_PA_HSMMC0 EXYNOS4_PA_HSMMC(0)
-#define S3C_PA_HSMMC1 EXYNOS4_PA_HSMMC(1)
-#define S3C_PA_HSMMC2 EXYNOS4_PA_HSMMC(2)
-#define S3C_PA_HSMMC3 EXYNOS4_PA_HSMMC(3)
-#define S3C_PA_IIC EXYNOS4_PA_IIC(0)
-#define S3C_PA_IIC1 EXYNOS4_PA_IIC(1)
-#define S3C_PA_IIC2 EXYNOS4_PA_IIC(2)
-#define S3C_PA_IIC3 EXYNOS4_PA_IIC(3)
-#define S3C_PA_IIC4 EXYNOS4_PA_IIC(4)
-#define S3C_PA_IIC5 EXYNOS4_PA_IIC(5)
-#define S3C_PA_IIC6 EXYNOS4_PA_IIC(6)
-#define S3C_PA_IIC7 EXYNOS4_PA_IIC(7)
-#define SAMSUNG_PA_ADC EXYNOS4_PA_ADC
-#define SAMSUNG_PA_ADC1 EXYNOS4_PA_ADC1
-#define S3C_PA_RTC EXYNOS4_PA_RTC
-#define S3C_PA_WDT EXYNOS4_PA_WATCHDOG
-
-#define S5P_PA_CHIPID EXYNOS4_PA_CHIPID
-#define S5P_PA_FIMC0 EXYNOS4_PA_FIMC0
-#define S5P_PA_FIMC1 EXYNOS4_PA_FIMC1
-#define S5P_PA_FIMC2 EXYNOS4_PA_FIMC2
-#define S5P_PA_FIMC3 EXYNOS4_PA_FIMC3
-#define S5P_PA_MIPI_CSIS0 EXYNOS4_PA_MIPI_CSIS0
-#define S5P_PA_MIPI_CSIS1 EXYNOS4_PA_MIPI_CSIS1
-#define S5P_PA_FIMD0 EXYNOS4_PA_FIMD0
-#define S5P_PA_ONENAND EXYNOS4_PA_ONENAND
-#define S5P_PA_ONENAND_DMA EXYNOS4_PA_ONENAND_DMA
-#define S5P_PA_SDRAM EXYNOS4_PA_SDRAM
-#define S5P_PA_SROMC EXYNOS4_PA_SROMC
-#define S5P_PA_MFC EXYNOS4_PA_MFC
-#define S5P_PA_SYSCON EXYNOS4_PA_SYSCON
-#define S5P_PA_TIMER EXYNOS4_PA_TIMER
-#define S5P_PA_EHCI EXYNOS4_PA_EHCI
-
-#define SAMSUNG_PA_KEYPAD EXYNOS4_PA_KEYPAD
-
-/* UART */
-
-#define S3C_PA_UART EXYNOS4_PA_UART
-
-#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET))
-#define S5P_PA_UART0 S5P_PA_UART(0)
-#define S5P_PA_UART1 S5P_PA_UART(1)
-#define S5P_PA_UART2 S5P_PA_UART(2)
-#define S5P_PA_UART3 S5P_PA_UART(3)
-#define S5P_PA_UART4 S5P_PA_UART(4)
-
-#define S5P_SZ_UART SZ_256
-
-#endif /* __ASM_ARCH_MAP_H */
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/include/mach/memory.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - Memory definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H __FILE__
-
-#define PLAT_PHYS_OFFSET UL(0x40000000)
-
-/* Maximum of 256MiB in one bank */
-#define MAX_PHYSMEM_BITS 32
-#define SECTION_SIZE_BITS 28
-
-#endif /* __ASM_ARCH_MEMORY_H */
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/include/mach/pm-core.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Based on arch/arm/mach-s3c2410/include/mach/pm-core.h,
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * EXYNOS4210 - PM core support for arch/arm/plat-s5p/pm.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-#include <mach/regs-pmu.h>
-
-static inline void s3c_pm_debug_init_uart(void)
-{
- /* nothing here yet */
-}
-
-static inline void s3c_pm_arch_prepare_irqs(void)
-{
- unsigned int tmp;
- tmp = __raw_readl(S5P_WAKEUP_MASK);
- tmp &= ~(1 << 31);
- __raw_writel(tmp, S5P_WAKEUP_MASK);
-
- __raw_writel(s3c_irqwake_intmask, S5P_WAKEUP_MASK);
- __raw_writel(s3c_irqwake_eintmask, S5P_EINT_WAKEUP_MASK);
-}
-
-static inline void s3c_pm_arch_stop_clocks(void)
-{
- /* nothing here yet */
-}
-
-static inline void s3c_pm_arch_show_resume_irqs(void)
-{
- /* nothing here yet */
-}
-
-static inline void s3c_pm_arch_update_uart(void __iomem *regs,
- struct pm_uart_save *save)
-{
- /* nothing here yet */
-}
-
-static inline void s3c_pm_restored_gpios(void)
-{
- /* nothing here yet */
-}
-
-static inline void s3c_pm_saved_gpios(void)
-{
- /* nothing here yet */
-}
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/include/mach/pmu.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * EXYNOS4210 - PMU(Power Management Unit) support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_PMU_H
-#define __ASM_ARCH_PMU_H __FILE__
-
-enum sys_powerdown {
- SYS_AFTR,
- SYS_LPA,
- SYS_SLEEP,
- NUM_SYS_POWERDOWN,
-};
-
-extern void exynos4_sys_powerdown_conf(enum sys_powerdown mode);
-
-#endif /* __ASM_ARCH_PMU_H */
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/include/mach/pwm-clock.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
- *
- * EXYNOS4 - pwm clock and timer support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_PWMCLK_H
-#define __ASM_ARCH_PWMCLK_H __FILE__
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
- return tcfg == S3C64XX_TCFG1_MUX_TCLK;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
- return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
- return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
- return ilog2(div);
-}
-
-#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
-
-#endif /* __ASM_ARCH_PWMCLK_H */
+++ /dev/null
-/* arch/arm/mach-exynos4/include/mach/regs-audss.h
- *
- * Copyright (c) 2011 Samsung Electronics
- * http://www.samsung.com
- *
- * Exynos4 Audio SubSystem clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_REGS_AUDSS_H
-#define __PLAT_REGS_AUDSS_H __FILE__
-
-#define EXYNOS4_AUDSS_INT_MEM (0x03000000)
-
-#endif /* _PLAT_REGS_AUDSS_H */
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/include/mach/regs-clock.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - Clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_CLOCK_H
-#define __ASM_ARCH_REGS_CLOCK_H __FILE__
-
-#include <plat/cpu.h>
-#include <mach/map.h>
-
-#define S5P_CLKREG(x) (S5P_VA_CMU + (x))
-
-#define S5P_CLKDIV_LEFTBUS S5P_CLKREG(0x04500)
-#define S5P_CLKDIV_STAT_LEFTBUS S5P_CLKREG(0x04600)
-#define S5P_CLKGATE_IP_LEFTBUS S5P_CLKREG(0x04800)
-
-#define S5P_CLKDIV_RIGHTBUS S5P_CLKREG(0x08500)
-#define S5P_CLKDIV_STAT_RIGHTBUS S5P_CLKREG(0x08600)
-#define S5P_CLKGATE_IP_RIGHTBUS S5P_CLKREG(0x08800)
-
-#define S5P_EPLL_LOCK S5P_CLKREG(0x0C010)
-#define S5P_VPLL_LOCK S5P_CLKREG(0x0C020)
-
-#define S5P_EPLL_CON0 S5P_CLKREG(0x0C110)
-#define S5P_EPLL_CON1 S5P_CLKREG(0x0C114)
-#define S5P_VPLL_CON0 S5P_CLKREG(0x0C120)
-#define S5P_VPLL_CON1 S5P_CLKREG(0x0C124)
-
-#define S5P_CLKSRC_TOP0 S5P_CLKREG(0x0C210)
-#define S5P_CLKSRC_TOP1 S5P_CLKREG(0x0C214)
-#define S5P_CLKSRC_CAM S5P_CLKREG(0x0C220)
-#define S5P_CLKSRC_TV S5P_CLKREG(0x0C224)
-#define S5P_CLKSRC_MFC S5P_CLKREG(0x0C228)
-#define S5P_CLKSRC_G3D S5P_CLKREG(0x0C22C)
-#define S5P_CLKSRC_IMAGE S5P_CLKREG(0x0C230)
-#define S5P_CLKSRC_LCD0 S5P_CLKREG(0x0C234)
-#define S5P_CLKSRC_MAUDIO S5P_CLKREG(0x0C23C)
-#define S5P_CLKSRC_FSYS S5P_CLKREG(0x0C240)
-#define S5P_CLKSRC_PERIL0 S5P_CLKREG(0x0C250)
-#define S5P_CLKSRC_PERIL1 S5P_CLKREG(0x0C254)
-
-#define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310)
-#define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320)
-#define S5P_CLKSRC_MASK_TV S5P_CLKREG(0x0C324)
-#define S5P_CLKSRC_MASK_LCD0 S5P_CLKREG(0x0C334)
-#define S5P_CLKSRC_MASK_MAUDIO S5P_CLKREG(0x0C33C)
-#define S5P_CLKSRC_MASK_FSYS S5P_CLKREG(0x0C340)
-#define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350)
-#define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354)
-
-#define S5P_CLKDIV_TOP S5P_CLKREG(0x0C510)
-#define S5P_CLKDIV_CAM S5P_CLKREG(0x0C520)
-#define S5P_CLKDIV_TV S5P_CLKREG(0x0C524)
-#define S5P_CLKDIV_MFC S5P_CLKREG(0x0C528)
-#define S5P_CLKDIV_G3D S5P_CLKREG(0x0C52C)
-#define S5P_CLKDIV_IMAGE S5P_CLKREG(0x0C530)
-#define S5P_CLKDIV_LCD0 S5P_CLKREG(0x0C534)
-#define S5P_CLKDIV_MAUDIO S5P_CLKREG(0x0C53C)
-#define S5P_CLKDIV_FSYS0 S5P_CLKREG(0x0C540)
-#define S5P_CLKDIV_FSYS1 S5P_CLKREG(0x0C544)
-#define S5P_CLKDIV_FSYS2 S5P_CLKREG(0x0C548)
-#define S5P_CLKDIV_FSYS3 S5P_CLKREG(0x0C54C)
-#define S5P_CLKDIV_PERIL0 S5P_CLKREG(0x0C550)
-#define S5P_CLKDIV_PERIL1 S5P_CLKREG(0x0C554)
-#define S5P_CLKDIV_PERIL2 S5P_CLKREG(0x0C558)
-#define S5P_CLKDIV_PERIL3 S5P_CLKREG(0x0C55C)
-#define S5P_CLKDIV_PERIL4 S5P_CLKREG(0x0C560)
-#define S5P_CLKDIV_PERIL5 S5P_CLKREG(0x0C564)
-#define S5P_CLKDIV2_RATIO S5P_CLKREG(0x0C580)
-
-#define S5P_CLKDIV_STAT_TOP S5P_CLKREG(0x0C610)
-
-#define S5P_CLKGATE_SCLKCAM S5P_CLKREG(0x0C820)
-#define S5P_CLKGATE_IP_CAM S5P_CLKREG(0x0C920)
-#define S5P_CLKGATE_IP_TV S5P_CLKREG(0x0C924)
-#define S5P_CLKGATE_IP_MFC S5P_CLKREG(0x0C928)
-#define S5P_CLKGATE_IP_G3D S5P_CLKREG(0x0C92C)
-#define S5P_CLKGATE_IP_IMAGE (soc_is_exynos4210() ? \
- S5P_CLKREG(0x0C930) : \
- S5P_CLKREG(0x04930))
-#define S5P_CLKGATE_IP_IMAGE_4210 S5P_CLKREG(0x0C930)
-#define S5P_CLKGATE_IP_IMAGE_4212 S5P_CLKREG(0x04930)
-#define S5P_CLKGATE_IP_LCD0 S5P_CLKREG(0x0C934)
-#define S5P_CLKGATE_IP_FSYS S5P_CLKREG(0x0C940)
-#define S5P_CLKGATE_IP_GPS S5P_CLKREG(0x0C94C)
-#define S5P_CLKGATE_IP_PERIL S5P_CLKREG(0x0C950)
-#define S5P_CLKGATE_IP_PERIR (soc_is_exynos4210() ? \
- S5P_CLKREG(0x0C960) : \
- S5P_CLKREG(0x08960))
-#define S5P_CLKGATE_IP_PERIR_4210 S5P_CLKREG(0x0C960)
-#define S5P_CLKGATE_IP_PERIR_4212 S5P_CLKREG(0x08960)
-#define S5P_CLKGATE_BLOCK S5P_CLKREG(0x0C970)
-
-#define S5P_CLKSRC_MASK_DMC S5P_CLKREG(0x10300)
-#define S5P_CLKSRC_DMC S5P_CLKREG(0x10200)
-#define S5P_CLKDIV_DMC0 S5P_CLKREG(0x10500)
-#define S5P_CLKDIV_DMC1 S5P_CLKREG(0x10504)
-#define S5P_CLKDIV_STAT_DMC0 S5P_CLKREG(0x10600)
-#define S5P_CLKGATE_IP_DMC S5P_CLKREG(0x10900)
-
-#define S5P_APLL_LOCK S5P_CLKREG(0x14000)
-#define S5P_MPLL_LOCK (soc_is_exynos4210() ? \
- S5P_CLKREG(0x14004) : \
- S5P_CLKREG(0x10008))
-#define S5P_APLL_CON0 S5P_CLKREG(0x14100)
-#define S5P_APLL_CON1 S5P_CLKREG(0x14104)
-#define S5P_MPLL_CON0 (soc_is_exynos4210() ? \
- S5P_CLKREG(0x14108) : \
- S5P_CLKREG(0x10108))
-#define S5P_MPLL_CON1 (soc_is_exynos4210() ? \
- S5P_CLKREG(0x1410C) : \
- S5P_CLKREG(0x1010C))
-
-#define S5P_CLKSRC_CPU S5P_CLKREG(0x14200)
-#define S5P_CLKMUX_STATCPU S5P_CLKREG(0x14400)
-
-#define S5P_CLKDIV_CPU S5P_CLKREG(0x14500)
-#define S5P_CLKDIV_CPU1 S5P_CLKREG(0x14504)
-#define S5P_CLKDIV_STATCPU S5P_CLKREG(0x14600)
-#define S5P_CLKDIV_STATCPU1 S5P_CLKREG(0x14604)
-
-#define S5P_CLKGATE_SCLKCPU S5P_CLKREG(0x14800)
-#define S5P_CLKGATE_IP_CPU S5P_CLKREG(0x14900)
-
-#define S5P_APLL_LOCKTIME (0x1C20) /* 300us */
-
-#define S5P_APLLCON0_ENABLE_SHIFT (31)
-#define S5P_APLLCON0_LOCKED_SHIFT (29)
-#define S5P_APLL_VAL_1000 ((250 << 16) | (6 << 8) | 1)
-#define S5P_APLL_VAL_800 ((200 << 16) | (6 << 8) | 1)
-
-#define S5P_EPLLCON0_ENABLE_SHIFT (31)
-#define S5P_EPLLCON0_LOCKED_SHIFT (29)
-
-#define S5P_VPLLCON0_ENABLE_SHIFT (31)
-#define S5P_VPLLCON0_LOCKED_SHIFT (29)
-
-#define S5P_CLKSRC_CPU_MUXCORE_SHIFT (16)
-#define S5P_CLKMUX_STATCPU_MUXCORE_MASK (0x7 << S5P_CLKSRC_CPU_MUXCORE_SHIFT)
-
-#define S5P_CLKDIV_CPU0_CORE_SHIFT (0)
-#define S5P_CLKDIV_CPU0_CORE_MASK (0x7 << S5P_CLKDIV_CPU0_CORE_SHIFT)
-#define S5P_CLKDIV_CPU0_COREM0_SHIFT (4)
-#define S5P_CLKDIV_CPU0_COREM0_MASK (0x7 << S5P_CLKDIV_CPU0_COREM0_SHIFT)
-#define S5P_CLKDIV_CPU0_COREM1_SHIFT (8)
-#define S5P_CLKDIV_CPU0_COREM1_MASK (0x7 << S5P_CLKDIV_CPU0_COREM1_SHIFT)
-#define S5P_CLKDIV_CPU0_PERIPH_SHIFT (12)
-#define S5P_CLKDIV_CPU0_PERIPH_MASK (0x7 << S5P_CLKDIV_CPU0_PERIPH_SHIFT)
-#define S5P_CLKDIV_CPU0_ATB_SHIFT (16)
-#define S5P_CLKDIV_CPU0_ATB_MASK (0x7 << S5P_CLKDIV_CPU0_ATB_SHIFT)
-#define S5P_CLKDIV_CPU0_PCLKDBG_SHIFT (20)
-#define S5P_CLKDIV_CPU0_PCLKDBG_MASK (0x7 << S5P_CLKDIV_CPU0_PCLKDBG_SHIFT)
-#define S5P_CLKDIV_CPU0_APLL_SHIFT (24)
-#define S5P_CLKDIV_CPU0_APLL_MASK (0x7 << S5P_CLKDIV_CPU0_APLL_SHIFT)
-
-#define S5P_CLKDIV_DMC0_ACP_SHIFT (0)
-#define S5P_CLKDIV_DMC0_ACP_MASK (0x7 << S5P_CLKDIV_DMC0_ACP_SHIFT)
-#define S5P_CLKDIV_DMC0_ACPPCLK_SHIFT (4)
-#define S5P_CLKDIV_DMC0_ACPPCLK_MASK (0x7 << S5P_CLKDIV_DMC0_ACPPCLK_SHIFT)
-#define S5P_CLKDIV_DMC0_DPHY_SHIFT (8)
-#define S5P_CLKDIV_DMC0_DPHY_MASK (0x7 << S5P_CLKDIV_DMC0_DPHY_SHIFT)
-#define S5P_CLKDIV_DMC0_DMC_SHIFT (12)
-#define S5P_CLKDIV_DMC0_DMC_MASK (0x7 << S5P_CLKDIV_DMC0_DMC_SHIFT)
-#define S5P_CLKDIV_DMC0_DMCD_SHIFT (16)
-#define S5P_CLKDIV_DMC0_DMCD_MASK (0x7 << S5P_CLKDIV_DMC0_DMCD_SHIFT)
-#define S5P_CLKDIV_DMC0_DMCP_SHIFT (20)
-#define S5P_CLKDIV_DMC0_DMCP_MASK (0x7 << S5P_CLKDIV_DMC0_DMCP_SHIFT)
-#define S5P_CLKDIV_DMC0_COPY2_SHIFT (24)
-#define S5P_CLKDIV_DMC0_COPY2_MASK (0x7 << S5P_CLKDIV_DMC0_COPY2_SHIFT)
-#define S5P_CLKDIV_DMC0_CORETI_SHIFT (28)
-#define S5P_CLKDIV_DMC0_CORETI_MASK (0x7 << S5P_CLKDIV_DMC0_CORETI_SHIFT)
-
-#define S5P_CLKDIV_TOP_ACLK200_SHIFT (0)
-#define S5P_CLKDIV_TOP_ACLK200_MASK (0x7 << S5P_CLKDIV_TOP_ACLK200_SHIFT)
-#define S5P_CLKDIV_TOP_ACLK100_SHIFT (4)
-#define S5P_CLKDIV_TOP_ACLK100_MASK (0xf << S5P_CLKDIV_TOP_ACLK100_SHIFT)
-#define S5P_CLKDIV_TOP_ACLK160_SHIFT (8)
-#define S5P_CLKDIV_TOP_ACLK160_MASK (0x7 << S5P_CLKDIV_TOP_ACLK160_SHIFT)
-#define S5P_CLKDIV_TOP_ACLK133_SHIFT (12)
-#define S5P_CLKDIV_TOP_ACLK133_MASK (0x7 << S5P_CLKDIV_TOP_ACLK133_SHIFT)
-#define S5P_CLKDIV_TOP_ONENAND_SHIFT (16)
-#define S5P_CLKDIV_TOP_ONENAND_MASK (0x7 << S5P_CLKDIV_TOP_ONENAND_SHIFT)
-
-#define S5P_CLKDIV_BUS_GDLR_SHIFT (0)
-#define S5P_CLKDIV_BUS_GDLR_MASK (0x7 << S5P_CLKDIV_BUS_GDLR_SHIFT)
-#define S5P_CLKDIV_BUS_GPLR_SHIFT (4)
-#define S5P_CLKDIV_BUS_GPLR_MASK (0x7 << S5P_CLKDIV_BUS_GPLR_SHIFT)
-
-/* Only for EXYNOS4210 */
-
-#define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238)
-#define S5P_CLKSRC_MASK_LCD1 S5P_CLKREG(0x0C338)
-#define S5P_CLKDIV_LCD1 S5P_CLKREG(0x0C538)
-#define S5P_CLKGATE_IP_LCD1 S5P_CLKREG(0x0C938)
-
-/* Compatibility defines and inclusion */
-
-#include <mach/regs-pmu.h>
-
-#define S5P_EPLL_CON S5P_EPLL_CON0
-
-#endif /* __ASM_ARCH_REGS_CLOCK_H */
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/include/mach/regs-gpio.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - GPIO (including EINT) register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_GPIO_H
-#define __ASM_ARCH_REGS_GPIO_H __FILE__
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-
-#define EXYNOS4_EINT40CON (S5P_VA_GPIO2 + 0xE00)
-#define S5P_EINT_CON(x) (EXYNOS4_EINT40CON + ((x) * 0x4))
-
-#define EXYNOS4_EINT40FLTCON0 (S5P_VA_GPIO2 + 0xE80)
-#define S5P_EINT_FLTCON(x) (EXYNOS4_EINT40FLTCON0 + ((x) * 0x4))
-
-#define EXYNOS4_EINT40MASK (S5P_VA_GPIO2 + 0xF00)
-#define S5P_EINT_MASK(x) (EXYNOS4_EINT40MASK + ((x) * 0x4))
-
-#define EXYNOS4_EINT40PEND (S5P_VA_GPIO2 + 0xF40)
-#define S5P_EINT_PEND(x) (EXYNOS4_EINT40PEND + ((x) * 0x4))
-
-#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3)
-
-#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7))
-
-#define EINT_MODE S3C_GPIO_SFN(0xf)
-
-#define EINT_GPIO_0(x) EXYNOS4_GPX0(x)
-#define EINT_GPIO_1(x) EXYNOS4_GPX1(x)
-#define EINT_GPIO_2(x) EXYNOS4_GPX2(x)
-#define EINT_GPIO_3(x) EXYNOS4_GPX3(x)
-
-#endif /* __ASM_ARCH_REGS_GPIO_H */
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/include/mach/regs-irq.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - IRQ register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_IRQ_H
-#define __ASM_ARCH_REGS_IRQ_H __FILE__
-
-#include <asm/hardware/gic.h>
-#include <mach/map.h>
-
-#endif /* __ASM_ARCH_REGS_IRQ_H */
+++ /dev/null
-/* arch/arm/mach-exynos4/include/mach/regs-mct.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 MCT configutation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_MCT_H
-#define __ASM_ARCH_REGS_MCT_H __FILE__
-
-#include <mach/map.h>
-
-#define EXYNOS4_MCTREG(x) (S5P_VA_SYSTIMER + (x))
-
-#define EXYNOS4_MCT_G_CNT_L EXYNOS4_MCTREG(0x100)
-#define EXYNOS4_MCT_G_CNT_U EXYNOS4_MCTREG(0x104)
-#define EXYNOS4_MCT_G_CNT_WSTAT EXYNOS4_MCTREG(0x110)
-
-#define EXYNOS4_MCT_G_COMP0_L EXYNOS4_MCTREG(0x200)
-#define EXYNOS4_MCT_G_COMP0_U EXYNOS4_MCTREG(0x204)
-#define EXYNOS4_MCT_G_COMP0_ADD_INCR EXYNOS4_MCTREG(0x208)
-
-#define EXYNOS4_MCT_G_TCON EXYNOS4_MCTREG(0x240)
-
-#define EXYNOS4_MCT_G_INT_CSTAT EXYNOS4_MCTREG(0x244)
-#define EXYNOS4_MCT_G_INT_ENB EXYNOS4_MCTREG(0x248)
-#define EXYNOS4_MCT_G_WSTAT EXYNOS4_MCTREG(0x24C)
-
-#define _EXYNOS4_MCT_L_BASE EXYNOS4_MCTREG(0x300)
-#define EXYNOS4_MCT_L_BASE(x) (_EXYNOS4_MCT_L_BASE + (0x100 * x))
-#define EXYNOS4_MCT_L_MASK (0xffffff00)
-
-#define MCT_L_TCNTB_OFFSET (0x00)
-#define MCT_L_ICNTB_OFFSET (0x08)
-#define MCT_L_TCON_OFFSET (0x20)
-#define MCT_L_INT_CSTAT_OFFSET (0x30)
-#define MCT_L_INT_ENB_OFFSET (0x34)
-#define MCT_L_WSTAT_OFFSET (0x40)
-
-#define MCT_G_TCON_START (1 << 8)
-#define MCT_G_TCON_COMP0_AUTO_INC (1 << 1)
-#define MCT_G_TCON_COMP0_ENABLE (1 << 0)
-
-#define MCT_L_TCON_INTERVAL_MODE (1 << 2)
-#define MCT_L_TCON_INT_START (1 << 1)
-#define MCT_L_TCON_TIMER_START (1 << 0)
-
-#endif /* __ASM_ARCH_REGS_MCT_H */
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/include/mach/regs-mem.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - SROMC and DMC register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_MEM_H
-#define __ASM_ARCH_REGS_MEM_H __FILE__
-
-#include <mach/map.h>
-
-#define S5P_DMC0_MEMCON_OFFSET 0x04
-
-#define S5P_DMC0_MEMTYPE_SHIFT 8
-#define S5P_DMC0_MEMTYPE_MASK 0xF
-
-#endif /* __ASM_ARCH_REGS_MEM_H */
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/include/mach/regs-pmu.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - Power management unit definition
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_PMU_H
-#define __ASM_ARCH_REGS_PMU_H __FILE__
-
-#include <mach/map.h>
-
-#define S5P_PMUREG(x) (S5P_VA_PMU + (x))
-
-#define S5P_CENTRAL_SEQ_CONFIGURATION S5P_PMUREG(0x0200)
-
-#define S5P_CENTRAL_LOWPWR_CFG (1 << 16)
-
-#define S5P_CENTRAL_SEQ_OPTION S5P_PMUREG(0x0208)
-
-#define S5P_USE_STANDBY_WFI0 (1 << 16)
-#define S5P_USE_STANDBY_WFI1 (1 << 17)
-#define S5P_USE_STANDBY_WFE0 (1 << 24)
-#define S5P_USE_STANDBY_WFE1 (1 << 25)
-#define S5P_USE_MASK ((0x3 << 16) | (0x3 << 24))
-
-#define S5P_SWRESET S5P_PMUREG(0x0400)
-
-#define S5P_WAKEUP_STAT S5P_PMUREG(0x0600)
-#define S5P_EINT_WAKEUP_MASK S5P_PMUREG(0x0604)
-#define S5P_WAKEUP_MASK S5P_PMUREG(0x0608)
-
-#define S5P_USBHOST_PHY_CONTROL S5P_PMUREG(0x0708)
-#define S5P_USBHOST_PHY_ENABLE (1 << 0)
-
-#define S5P_MIPI_DPHY_CONTROL(n) S5P_PMUREG(0x0710 + (n) * 4)
-#define S5P_MIPI_DPHY_ENABLE (1 << 0)
-#define S5P_MIPI_DPHY_SRESETN (1 << 1)
-#define S5P_MIPI_DPHY_MRESETN (1 << 2)
-
-#define S5P_PMU_SATA_PHY_CONTROL S5P_PMUREG(0x0720)
-#define S5P_INFORM0 S5P_PMUREG(0x0800)
-#define S5P_INFORM1 S5P_PMUREG(0x0804)
-#define S5P_INFORM2 S5P_PMUREG(0x0808)
-#define S5P_INFORM3 S5P_PMUREG(0x080C)
-#define S5P_INFORM4 S5P_PMUREG(0x0810)
-#define S5P_INFORM5 S5P_PMUREG(0x0814)
-#define S5P_INFORM6 S5P_PMUREG(0x0818)
-#define S5P_INFORM7 S5P_PMUREG(0x081C)
-
-#define S5P_ARM_CORE0_LOWPWR S5P_PMUREG(0x1000)
-#define S5P_DIS_IRQ_CORE0 S5P_PMUREG(0x1004)
-#define S5P_DIS_IRQ_CENTRAL0 S5P_PMUREG(0x1008)
-#define S5P_ARM_CORE1_LOWPWR S5P_PMUREG(0x1010)
-#define S5P_DIS_IRQ_CORE1 S5P_PMUREG(0x1014)
-#define S5P_DIS_IRQ_CENTRAL1 S5P_PMUREG(0x1018)
-#define S5P_ARM_COMMON_LOWPWR S5P_PMUREG(0x1080)
-#define S5P_L2_0_LOWPWR S5P_PMUREG(0x10C0)
-#define S5P_L2_1_LOWPWR S5P_PMUREG(0x10C4)
-#define S5P_CMU_ACLKSTOP_LOWPWR S5P_PMUREG(0x1100)
-#define S5P_CMU_SCLKSTOP_LOWPWR S5P_PMUREG(0x1104)
-#define S5P_CMU_RESET_LOWPWR S5P_PMUREG(0x110C)
-#define S5P_APLL_SYSCLK_LOWPWR S5P_PMUREG(0x1120)
-#define S5P_MPLL_SYSCLK_LOWPWR S5P_PMUREG(0x1124)
-#define S5P_VPLL_SYSCLK_LOWPWR S5P_PMUREG(0x1128)
-#define S5P_EPLL_SYSCLK_LOWPWR S5P_PMUREG(0x112C)
-#define S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR S5P_PMUREG(0x1138)
-#define S5P_CMU_RESET_GPSALIVE_LOWPWR S5P_PMUREG(0x113C)
-#define S5P_CMU_CLKSTOP_CAM_LOWPWR S5P_PMUREG(0x1140)
-#define S5P_CMU_CLKSTOP_TV_LOWPWR S5P_PMUREG(0x1144)
-#define S5P_CMU_CLKSTOP_MFC_LOWPWR S5P_PMUREG(0x1148)
-#define S5P_CMU_CLKSTOP_G3D_LOWPWR S5P_PMUREG(0x114C)
-#define S5P_CMU_CLKSTOP_LCD0_LOWPWR S5P_PMUREG(0x1150)
-#define S5P_CMU_CLKSTOP_LCD1_LOWPWR S5P_PMUREG(0x1154)
-#define S5P_CMU_CLKSTOP_MAUDIO_LOWPWR S5P_PMUREG(0x1158)
-#define S5P_CMU_CLKSTOP_GPS_LOWPWR S5P_PMUREG(0x115C)
-#define S5P_CMU_RESET_CAM_LOWPWR S5P_PMUREG(0x1160)
-#define S5P_CMU_RESET_TV_LOWPWR S5P_PMUREG(0x1164)
-#define S5P_CMU_RESET_MFC_LOWPWR S5P_PMUREG(0x1168)
-#define S5P_CMU_RESET_G3D_LOWPWR S5P_PMUREG(0x116C)
-#define S5P_CMU_RESET_LCD0_LOWPWR S5P_PMUREG(0x1170)
-#define S5P_CMU_RESET_LCD1_LOWPWR S5P_PMUREG(0x1174)
-#define S5P_CMU_RESET_MAUDIO_LOWPWR S5P_PMUREG(0x1178)
-#define S5P_CMU_RESET_GPS_LOWPWR S5P_PMUREG(0x117C)
-#define S5P_TOP_BUS_LOWPWR S5P_PMUREG(0x1180)
-#define S5P_TOP_RETENTION_LOWPWR S5P_PMUREG(0x1184)
-#define S5P_TOP_PWR_LOWPWR S5P_PMUREG(0x1188)
-#define S5P_LOGIC_RESET_LOWPWR S5P_PMUREG(0x11A0)
-#define S5P_ONENAND_MEM_LOWPWR S5P_PMUREG(0x11C0)
-#define S5P_MODIMIF_MEM_LOWPWR S5P_PMUREG(0x11C4)
-#define S5P_G2D_ACP_MEM_LOWPWR S5P_PMUREG(0x11C8)
-#define S5P_USBOTG_MEM_LOWPWR S5P_PMUREG(0x11CC)
-#define S5P_HSMMC_MEM_LOWPWR S5P_PMUREG(0x11D0)
-#define S5P_CSSYS_MEM_LOWPWR S5P_PMUREG(0x11D4)
-#define S5P_SECSS_MEM_LOWPWR S5P_PMUREG(0x11D8)
-#define S5P_PCIE_MEM_LOWPWR S5P_PMUREG(0x11E0)
-#define S5P_SATA_MEM_LOWPWR S5P_PMUREG(0x11E4)
-#define S5P_PAD_RETENTION_DRAM_LOWPWR S5P_PMUREG(0x1200)
-#define S5P_PAD_RETENTION_MAUDIO_LOWPWR S5P_PMUREG(0x1204)
-#define S5P_PAD_RETENTION_GPIO_LOWPWR S5P_PMUREG(0x1220)
-#define S5P_PAD_RETENTION_UART_LOWPWR S5P_PMUREG(0x1224)
-#define S5P_PAD_RETENTION_MMCA_LOWPWR S5P_PMUREG(0x1228)
-#define S5P_PAD_RETENTION_MMCB_LOWPWR S5P_PMUREG(0x122C)
-#define S5P_PAD_RETENTION_EBIA_LOWPWR S5P_PMUREG(0x1230)
-#define S5P_PAD_RETENTION_EBIB_LOWPWR S5P_PMUREG(0x1234)
-#define S5P_PAD_RETENTION_ISOLATION_LOWPWR S5P_PMUREG(0x1240)
-#define S5P_PAD_RETENTION_ALV_SEL_LOWPWR S5P_PMUREG(0x1260)
-#define S5P_XUSBXTI_LOWPWR S5P_PMUREG(0x1280)
-#define S5P_XXTI_LOWPWR S5P_PMUREG(0x1284)
-#define S5P_EXT_REGULATOR_LOWPWR S5P_PMUREG(0x12C0)
-#define S5P_GPIO_MODE_LOWPWR S5P_PMUREG(0x1300)
-#define S5P_GPIO_MODE_MAUDIO_LOWPWR S5P_PMUREG(0x1340)
-#define S5P_CAM_LOWPWR S5P_PMUREG(0x1380)
-#define S5P_TV_LOWPWR S5P_PMUREG(0x1384)
-#define S5P_MFC_LOWPWR S5P_PMUREG(0x1388)
-#define S5P_G3D_LOWPWR S5P_PMUREG(0x138C)
-#define S5P_LCD0_LOWPWR S5P_PMUREG(0x1390)
-#define S5P_LCD1_LOWPWR S5P_PMUREG(0x1394)
-#define S5P_MAUDIO_LOWPWR S5P_PMUREG(0x1398)
-#define S5P_GPS_LOWPWR S5P_PMUREG(0x139C)
-#define S5P_GPS_ALIVE_LOWPWR S5P_PMUREG(0x13A0)
-
-#define S5P_ARM_CORE0_CONFIGURATION S5P_PMUREG(0x2000)
-#define S5P_ARM_CORE0_OPTION S5P_PMUREG(0x2008)
-#define S5P_ARM_CORE1_CONFIGURATION S5P_PMUREG(0x2080)
-#define S5P_ARM_CORE1_STATUS S5P_PMUREG(0x2084)
-#define S5P_ARM_CORE1_OPTION S5P_PMUREG(0x2088)
-
-#define S5P_ARM_COMMON_OPTION S5P_PMUREG(0x2408)
-#define S5P_TOP_PWR_OPTION S5P_PMUREG(0x2C48)
-#define S5P_CAM_OPTION S5P_PMUREG(0x3C08)
-#define S5P_TV_OPTION S5P_PMUREG(0x3C28)
-#define S5P_MFC_OPTION S5P_PMUREG(0x3C48)
-#define S5P_G3D_OPTION S5P_PMUREG(0x3C68)
-#define S5P_LCD0_OPTION S5P_PMUREG(0x3C88)
-#define S5P_LCD1_OPTION S5P_PMUREG(0x3CA8)
-#define S5P_MAUDIO_OPTION S5P_PMUREG(0x3CC8)
-#define S5P_GPS_OPTION S5P_PMUREG(0x3CE8)
-#define S5P_GPS_ALIVE_OPTION S5P_PMUREG(0x3D08)
-
-#define S5P_PAD_RET_MAUDIO_OPTION S5P_PMUREG(0x3028)
-#define S5P_PAD_RET_GPIO_OPTION S5P_PMUREG(0x3108)
-#define S5P_PAD_RET_UART_OPTION S5P_PMUREG(0x3128)
-#define S5P_PAD_RET_MMCA_OPTION S5P_PMUREG(0x3148)
-#define S5P_PAD_RET_MMCB_OPTION S5P_PMUREG(0x3168)
-#define S5P_PAD_RET_EBIA_OPTION S5P_PMUREG(0x3188)
-#define S5P_PAD_RET_EBIB_OPTION S5P_PMUREG(0x31A8)
-
-#define S5P_PMU_CAM_CONF S5P_PMUREG(0x3C00)
-#define S5P_PMU_TV_CONF S5P_PMUREG(0x3C20)
-#define S5P_PMU_MFC_CONF S5P_PMUREG(0x3C40)
-#define S5P_PMU_G3D_CONF S5P_PMUREG(0x3C60)
-#define S5P_PMU_LCD0_CONF S5P_PMUREG(0x3C80)
-#define S5P_PMU_LCD1_CONF S5P_PMUREG(0x3CA0)
-#define S5P_PMU_GPS_CONF S5P_PMUREG(0x3CE0)
-
-#define S5P_PMU_SATA_PHY_CONTROL_EN 0x1
-#define S5P_CORE_LOCAL_PWR_EN 0x3
-#define S5P_INT_LOCAL_PWR_EN 0x7
-
-#define S5P_CHECK_SLEEP 0x00000BAD
-
-#endif /* __ASM_ARCH_REGS_PMU_H */
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/include/mach/regs-sysmmu.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - System MMU register
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_SYSMMU_H
-#define __ASM_ARCH_REGS_SYSMMU_H __FILE__
-
-#define S5P_MMU_CTRL 0x000
-#define S5P_MMU_CFG 0x004
-#define S5P_MMU_STATUS 0x008
-#define S5P_MMU_FLUSH 0x00C
-#define S5P_PT_BASE_ADDR 0x014
-#define S5P_INT_STATUS 0x018
-#define S5P_INT_CLEAR 0x01C
-#define S5P_PAGE_FAULT_ADDR 0x024
-#define S5P_AW_FAULT_ADDR 0x028
-#define S5P_AR_FAULT_ADDR 0x02C
-#define S5P_DEFAULT_SLAVE_ADDR 0x030
-
-#endif /* __ASM_ARCH_REGS_SYSMMU_H */
+++ /dev/null
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __PLAT_S5P_REGS_USB_PHY_H
-#define __PLAT_S5P_REGS_USB_PHY_H
-
-#define EXYNOS4_HSOTG_PHYREG(x) ((x) + S3C_VA_USB_HSPHY)
-
-#define EXYNOS4_PHYPWR EXYNOS4_HSOTG_PHYREG(0x00)
-#define PHY1_HSIC_NORMAL_MASK (0xf << 9)
-#define PHY1_HSIC1_SLEEP (1 << 12)
-#define PHY1_HSIC1_FORCE_SUSPEND (1 << 11)
-#define PHY1_HSIC0_SLEEP (1 << 10)
-#define PHY1_HSIC0_FORCE_SUSPEND (1 << 9)
-
-#define PHY1_STD_NORMAL_MASK (0x7 << 6)
-#define PHY1_STD_SLEEP (1 << 8)
-#define PHY1_STD_ANALOG_POWERDOWN (1 << 7)
-#define PHY1_STD_FORCE_SUSPEND (1 << 6)
-
-#define PHY0_NORMAL_MASK (0x39 << 0)
-#define PHY0_SLEEP (1 << 5)
-#define PHY0_OTG_DISABLE (1 << 4)
-#define PHY0_ANALOG_POWERDOWN (1 << 3)
-#define PHY0_FORCE_SUSPEND (1 << 0)
-
-#define EXYNOS4_PHYCLK EXYNOS4_HSOTG_PHYREG(0x04)
-#define PHY1_COMMON_ON_N (1 << 7)
-#define PHY0_COMMON_ON_N (1 << 4)
-#define PHY0_ID_PULLUP (1 << 2)
-#define CLKSEL_MASK (0x3 << 0)
-#define CLKSEL_SHIFT (0)
-#define CLKSEL_48M (0x0 << 0)
-#define CLKSEL_12M (0x2 << 0)
-#define CLKSEL_24M (0x3 << 0)
-
-#define EXYNOS4_RSTCON EXYNOS4_HSOTG_PHYREG(0x08)
-#define HOST_LINK_PORT_SWRST_MASK (0xf << 6)
-#define HOST_LINK_PORT2_SWRST (1 << 9)
-#define HOST_LINK_PORT1_SWRST (1 << 8)
-#define HOST_LINK_PORT0_SWRST (1 << 7)
-#define HOST_LINK_ALL_SWRST (1 << 6)
-
-#define PHY1_SWRST_MASK (0x7 << 3)
-#define PHY1_HSIC_SWRST (1 << 5)
-#define PHY1_STD_SWRST (1 << 4)
-#define PHY1_ALL_SWRST (1 << 3)
-
-#define PHY0_SWRST_MASK (0x7 << 0)
-#define PHY0_PHYLINK_SWRST (1 << 2)
-#define PHY0_HLINK_SWRST (1 << 1)
-#define PHY0_SWRST (1 << 0)
-
-#define EXYNOS4_PHY1CON EXYNOS4_HSOTG_PHYREG(0x34)
-#define FPENABLEN (1 << 0)
-
-#endif /* __PLAT_S5P_REGS_USB_PHY_H */
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/include/mach/sysmmu.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Samsung sysmmu driver for EXYNOS4
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARM_ARCH_SYSMMU_H
-#define __ASM_ARM_ARCH_SYSMMU_H __FILE__
-
-enum exynos4_sysmmu_ips {
- SYSMMU_MDMA,
- SYSMMU_SSS,
- SYSMMU_FIMC0,
- SYSMMU_FIMC1,
- SYSMMU_FIMC2,
- SYSMMU_FIMC3,
- SYSMMU_JPEG,
- SYSMMU_FIMD0,
- SYSMMU_FIMD1,
- SYSMMU_PCIe,
- SYSMMU_G2D,
- SYSMMU_ROTATOR,
- SYSMMU_MDMA2,
- SYSMMU_TV,
- SYSMMU_MFC_L,
- SYSMMU_MFC_R,
- EXYNOS4_SYSMMU_TOTAL_IPNUM,
-};
-
-#define S5P_SYSMMU_TOTAL_IPNUM EXYNOS4_SYSMMU_TOTAL_IPNUM
-
-extern const char *sysmmu_ips_name[EXYNOS4_SYSMMU_TOTAL_IPNUM];
-
-typedef enum exynos4_sysmmu_ips sysmmu_ips;
-
-void sysmmu_clk_init(struct device *dev, sysmmu_ips ips);
-void sysmmu_clk_enable(sysmmu_ips ips);
-void sysmmu_clk_disable(sysmmu_ips ips);
-
-#endif /* __ASM_ARM_ARCH_SYSMMU_H */
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/include/mach/system.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - system support header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-#include <plat/system-reset.h>
-
-static void arch_idle(void)
-{
- /* nothing here yet */
-}
-#endif /* __ASM_ARCH_SYSTEM_H */
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/include/mach/timex.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright (c) 2003-2010 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Based on arch/arm/mach-s5p6442/include/mach/timex.h
- *
- * EXYNOS4 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H __FILE__
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-#define CLOCK_TICK_RATE 12000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/include/mach/uncompress.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H __FILE__
-
-#include <mach/map.h>
-#include <plat/uncompress.h>
-
-static void arch_detect_cpu(void)
-{
- /* we do not need to do any cpu detection here at the moment. */
-
- /*
- * For preventing FIFO overrun or infinite loop of UART console,
- * fifo_max should be the minimum fifo size of all of the UART channels
- */
- fifo_mask = S5PV210_UFSTAT_TXMASK;
- fifo_max = 15 << S5PV210_UFSTAT_TXSHIFT;
-}
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/include/mach/vmalloc.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * Based on arch/arm/mach-s5p6440/include/mach/vmalloc.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * EXYNOS4 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H __FILE__
-
-#define VMALLOC_END 0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/init.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/serial_core.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/regs-serial.h>
-
-static struct s3c24xx_uart_clksrc exynos4_serial_clocks[] = {
- [0] = {
- .name = "uclk1",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- },
-};
-
-/* uart registration process */
-void __init exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- struct s3c2410_uartcfg *tcfg = cfg;
- u32 ucnt;
-
- for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
- if (!tcfg->clocks) {
- tcfg->has_fracval = 1;
- tcfg->clocks = exynos4_serial_clocks;
- tcfg->clocks_size = ARRAY_SIZE(exynos4_serial_clocks);
- }
- tcfg->flags |= NO_NEED_CHECK_CLKSRC;
- }
-
- s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
-}
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/irq-combiner.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Based on arch/arm/common/gic.c
- *
- * IRQ COMBINER support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/io.h>
-
-#include <asm/mach/irq.h>
-
-#define COMBINER_ENABLE_SET 0x0
-#define COMBINER_ENABLE_CLEAR 0x4
-#define COMBINER_INT_STATUS 0xC
-
-static DEFINE_SPINLOCK(irq_controller_lock);
-
-struct combiner_chip_data {
- unsigned int irq_offset;
- unsigned int irq_mask;
- void __iomem *base;
-};
-
-static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
-
-static inline void __iomem *combiner_base(struct irq_data *data)
-{
- struct combiner_chip_data *combiner_data =
- irq_data_get_irq_chip_data(data);
-
- return combiner_data->base;
-}
-
-static void combiner_mask_irq(struct irq_data *data)
-{
- u32 mask = 1 << (data->irq % 32);
-
- __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR);
-}
-
-static void combiner_unmask_irq(struct irq_data *data)
-{
- u32 mask = 1 << (data->irq % 32);
-
- __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET);
-}
-
-static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
-{
- struct combiner_chip_data *chip_data = irq_get_handler_data(irq);
- struct irq_chip *chip = irq_get_chip(irq);
- unsigned int cascade_irq, combiner_irq;
- unsigned long status;
-
- chained_irq_enter(chip, desc);
-
- spin_lock(&irq_controller_lock);
- status = __raw_readl(chip_data->base + COMBINER_INT_STATUS);
- spin_unlock(&irq_controller_lock);
- status &= chip_data->irq_mask;
-
- if (status == 0)
- goto out;
-
- combiner_irq = __ffs(status);
-
- cascade_irq = combiner_irq + (chip_data->irq_offset & ~31);
- if (unlikely(cascade_irq >= NR_IRQS))
- do_bad_IRQ(cascade_irq, desc);
- else
- generic_handle_irq(cascade_irq);
-
- out:
- chained_irq_exit(chip, desc);
-}
-
-static struct irq_chip combiner_chip = {
- .name = "COMBINER",
- .irq_mask = combiner_mask_irq,
- .irq_unmask = combiner_unmask_irq,
-};
-
-void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq)
-{
- if (combiner_nr >= MAX_COMBINER_NR)
- BUG();
- if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0)
- BUG();
- irq_set_chained_handler(irq, combiner_handle_cascade_irq);
-}
-
-void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
- unsigned int irq_start)
-{
- unsigned int i;
-
- if (combiner_nr >= MAX_COMBINER_NR)
- BUG();
-
- combiner_data[combiner_nr].base = base;
- combiner_data[combiner_nr].irq_offset = irq_start;
- combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3);
-
- /* Disable all interrupts */
-
- __raw_writel(combiner_data[combiner_nr].irq_mask,
- base + COMBINER_ENABLE_CLEAR);
-
- /* Setup the Linux IRQ subsystem */
-
- for (i = irq_start; i < combiner_data[combiner_nr].irq_offset
- + MAX_IRQ_IN_COMBINER; i++) {
- irq_set_chip_and_handler(i, &combiner_chip, handle_level_irq);
- irq_set_chip_data(i, &combiner_data[combiner_nr]);
- set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
- }
-}
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/irq-eint.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - IRQ EINT support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/sysdev.h>
-#include <linux/gpio.h>
-
-#include <plat/pm.h>
-#include <plat/cpu.h>
-#include <plat/gpio-cfg.h>
-
-#include <mach/regs-gpio.h>
-
-#include <asm/mach/irq.h>
-
-static DEFINE_SPINLOCK(eint_lock);
-
-static unsigned int eint0_15_data[16];
-
-static unsigned int exynos4_get_irq_nr(unsigned int number)
-{
- u32 ret = 0;
-
- switch (number) {
- case 0 ... 3:
- ret = (number + IRQ_EINT0);
- break;
- case 4 ... 7:
- ret = (number + (IRQ_EINT4 - 4));
- break;
- case 8 ... 15:
- ret = (number + (IRQ_EINT8 - 8));
- break;
- default:
- printk(KERN_ERR "number available : %d\n", number);
- }
-
- return ret;
-}
-
-static inline void exynos4_irq_eint_mask(struct irq_data *data)
-{
- u32 mask;
-
- spin_lock(&eint_lock);
- mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
- mask |= eint_irq_to_bit(data->irq);
- __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
- spin_unlock(&eint_lock);
-}
-
-static void exynos4_irq_eint_unmask(struct irq_data *data)
-{
- u32 mask;
-
- spin_lock(&eint_lock);
- mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
- mask &= ~(eint_irq_to_bit(data->irq));
- __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
- spin_unlock(&eint_lock);
-}
-
-static inline void exynos4_irq_eint_ack(struct irq_data *data)
-{
- __raw_writel(eint_irq_to_bit(data->irq),
- S5P_EINT_PEND(EINT_REG_NR(data->irq)));
-}
-
-static void exynos4_irq_eint_maskack(struct irq_data *data)
-{
- exynos4_irq_eint_mask(data);
- exynos4_irq_eint_ack(data);
-}
-
-static int exynos4_irq_eint_set_type(struct irq_data *data, unsigned int type)
-{
- int offs = EINT_OFFSET(data->irq);
- int shift;
- u32 ctrl, mask;
- u32 newvalue = 0;
-
- switch (type) {
- case IRQ_TYPE_EDGE_RISING:
- newvalue = S5P_IRQ_TYPE_EDGE_RISING;
- break;
-
- case IRQ_TYPE_EDGE_FALLING:
- newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
- break;
-
- case IRQ_TYPE_EDGE_BOTH:
- newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
- break;
-
- case IRQ_TYPE_LEVEL_LOW:
- newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
- break;
-
- case IRQ_TYPE_LEVEL_HIGH:
- newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
- break;
-
- default:
- printk(KERN_ERR "No such irq type %d", type);
- return -EINVAL;
- }
-
- shift = (offs & 0x7) * 4;
- mask = 0x7 << shift;
-
- spin_lock(&eint_lock);
- ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq)));
- ctrl &= ~mask;
- ctrl |= newvalue << shift;
- __raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq)));
- spin_unlock(&eint_lock);
-
- switch (offs) {
- case 0 ... 7:
- s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
- break;
- case 8 ... 15:
- s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
- break;
- case 16 ... 23:
- s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
- break;
- case 24 ... 31:
- s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
- break;
- default:
- printk(KERN_ERR "No such irq number %d", offs);
- }
-
- return 0;
-}
-
-static struct irq_chip exynos4_irq_eint = {
- .name = "exynos4-eint",
- .irq_mask = exynos4_irq_eint_mask,
- .irq_unmask = exynos4_irq_eint_unmask,
- .irq_mask_ack = exynos4_irq_eint_maskack,
- .irq_ack = exynos4_irq_eint_ack,
- .irq_set_type = exynos4_irq_eint_set_type,
-#ifdef CONFIG_PM
- .irq_set_wake = s3c_irqext_wake,
-#endif
-};
-
-/* exynos4_irq_demux_eint
- *
- * This function demuxes the IRQ from from EINTs 16 to 31.
- * It is designed to be inlined into the specific handler
- * s5p_irq_demux_eintX_Y.
- *
- * Each EINT pend/mask registers handle eight of them.
- */
-static inline void exynos4_irq_demux_eint(unsigned int start)
-{
- unsigned int irq;
-
- u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
- u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
-
- status &= ~mask;
- status &= 0xff;
-
- while (status) {
- irq = fls(status) - 1;
- generic_handle_irq(irq + start);
- status &= ~(1 << irq);
- }
-}
-
-static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
-{
- struct irq_chip *chip = irq_get_chip(irq);
- chained_irq_enter(chip, desc);
- exynos4_irq_demux_eint(IRQ_EINT(16));
- exynos4_irq_demux_eint(IRQ_EINT(24));
- chained_irq_exit(chip, desc);
-}
-
-static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
-{
- u32 *irq_data = irq_get_handler_data(irq);
- struct irq_chip *chip = irq_get_chip(irq);
-
- chained_irq_enter(chip, desc);
- chip->irq_mask(&desc->irq_data);
-
- if (chip->irq_ack)
- chip->irq_ack(&desc->irq_data);
-
- generic_handle_irq(*irq_data);
-
- chip->irq_unmask(&desc->irq_data);
- chained_irq_exit(chip, desc);
-}
-
-int __init exynos4_init_irq_eint(void)
-{
- int irq;
-
- for (irq = 0 ; irq <= 31 ; irq++) {
- irq_set_chip_and_handler(IRQ_EINT(irq), &exynos4_irq_eint,
- handle_level_irq);
- set_irq_flags(IRQ_EINT(irq), IRQF_VALID);
- }
-
- irq_set_chained_handler(IRQ_EINT16_31, exynos4_irq_demux_eint16_31);
-
- for (irq = 0 ; irq <= 15 ; irq++) {
- eint0_15_data[irq] = IRQ_EINT(irq);
-
- irq_set_handler_data(exynos4_get_irq_nr(irq),
- &eint0_15_data[irq]);
- irq_set_chained_handler(exynos4_get_irq_nr(irq),
- exynos4_irq_eint0_15);
- }
-
- return 0;
-}
-
-arch_initcall(exynos4_init_irq_eint);
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/mach-armlex4210.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/gpio.h>
-#include <linux/io.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/smsc911x.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/exynos4.h>
-#include <plat/gpio-cfg.h>
-#include <plat/regs-serial.h>
-#include <plat/regs-srom.h>
-#include <plat/sdhci.h>
-
-#include <mach/map.h>
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define ARMLEX4210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define ARMLEX4210_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define ARMLEX4210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S5PV210_UFCON_TXTRIG4 | \
- S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg armlex4210_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = ARMLEX4210_UCON_DEFAULT,
- .ulcon = ARMLEX4210_ULCON_DEFAULT,
- .ufcon = ARMLEX4210_UFCON_DEFAULT,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = ARMLEX4210_UCON_DEFAULT,
- .ulcon = ARMLEX4210_ULCON_DEFAULT,
- .ufcon = ARMLEX4210_UFCON_DEFAULT,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = ARMLEX4210_UCON_DEFAULT,
- .ulcon = ARMLEX4210_ULCON_DEFAULT,
- .ufcon = ARMLEX4210_UFCON_DEFAULT,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = ARMLEX4210_UCON_DEFAULT,
- .ulcon = ARMLEX4210_ULCON_DEFAULT,
- .ufcon = ARMLEX4210_UFCON_DEFAULT,
- },
-};
-
-static struct s3c_sdhci_platdata armlex4210_hsmmc0_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_PERMANENT,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
- .max_width = 8,
- .host_caps = MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata armlex4210_hsmmc2_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPX2(5),
- .ext_cd_gpio_invert = 1,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
- .max_width = 4,
-};
-
-static struct s3c_sdhci_platdata armlex4210_hsmmc3_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_PERMANENT,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
- .max_width = 4,
-};
-
-static void __init armlex4210_sdhci_init(void)
-{
- s3c_sdhci0_set_platdata(&armlex4210_hsmmc0_pdata);
- s3c_sdhci2_set_platdata(&armlex4210_hsmmc2_pdata);
- s3c_sdhci3_set_platdata(&armlex4210_hsmmc3_pdata);
-}
-
-static void __init armlex4210_wlan_init(void)
-{
- /* enable */
- s3c_gpio_cfgpin(EXYNOS4_GPX2(0), S3C_GPIO_SFN(0xf));
- s3c_gpio_setpull(EXYNOS4_GPX2(0), S3C_GPIO_PULL_UP);
-
- /* reset */
- s3c_gpio_cfgpin(EXYNOS4_GPX1(6), S3C_GPIO_SFN(0xf));
- s3c_gpio_setpull(EXYNOS4_GPX1(6), S3C_GPIO_PULL_UP);
-
- /* wakeup */
- s3c_gpio_cfgpin(EXYNOS4_GPX1(5), S3C_GPIO_SFN(0xf));
- s3c_gpio_setpull(EXYNOS4_GPX1(5), S3C_GPIO_PULL_UP);
-}
-
-static struct resource armlex4210_smsc911x_resources[] = {
- [0] = {
- .start = EXYNOS4_PA_SROM_BANK(3),
- .end = EXYNOS4_PA_SROM_BANK(3) + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_EINT(27),
- .end = IRQ_EINT(27),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
- },
-};
-
-static struct smsc911x_platform_config smsc9215_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
-};
-
-static struct platform_device armlex4210_smsc911x = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(armlex4210_smsc911x_resources),
- .resource = armlex4210_smsc911x_resources,
- .dev = {
- .platform_data = &smsc9215_config,
- },
-};
-
-static struct platform_device *armlex4210_devices[] __initdata = {
- &s3c_device_hsmmc0,
- &s3c_device_hsmmc2,
- &s3c_device_hsmmc3,
- &s3c_device_rtc,
- &s3c_device_wdt,
- &exynos4_device_sysmmu,
- &samsung_asoc_dma,
- &armlex4210_smsc911x,
- &exynos4_device_ahci,
-};
-
-static void __init armlex4210_smsc911x_init(void)
-{
- u32 cs1;
-
- /* configure nCS1 width to 16 bits */
- cs1 = __raw_readl(S5P_SROM_BW) &
- ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
- cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
- (0 << S5P_SROM_BW__WAITENABLE__SHIFT) |
- (1 << S5P_SROM_BW__ADDRMODE__SHIFT) |
- (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
- S5P_SROM_BW__NCS1__SHIFT;
- __raw_writel(cs1, S5P_SROM_BW);
-
- /* set timing for nCS1 suitable for ethernet chip */
- __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
- (0x9 << S5P_SROM_BCX__TACP__SHIFT) |
- (0xc << S5P_SROM_BCX__TCAH__SHIFT) |
- (0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
- (0x6 << S5P_SROM_BCX__TACC__SHIFT) |
- (0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
- (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
-}
-
-static void __init armlex4210_map_io(void)
-{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
- s3c24xx_init_clocks(24000000);
- s3c24xx_init_uarts(armlex4210_uartcfgs,
- ARRAY_SIZE(armlex4210_uartcfgs));
-}
-
-static void __init armlex4210_machine_init(void)
-{
- armlex4210_smsc911x_init();
-
- armlex4210_sdhci_init();
-
- armlex4210_wlan_init();
-
- platform_add_devices(armlex4210_devices,
- ARRAY_SIZE(armlex4210_devices));
-}
-
-MACHINE_START(ARMLEX4210, "ARMLEX4210")
- /* Maintainer: Alim Akhtar <alim.akhtar@samsung.com> */
- .atag_offset = 0x100,
- .init_irq = exynos4_init_irq,
- .map_io = armlex4210_map_io,
- .init_machine = armlex4210_machine_init,
- .timer = &exynos4_timer,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-exynos4/mach-nuri.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/i2c/atmel_mxt_ts.h>
-#include <linux/i2c-gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio.h>
-#include <linux/power/max8903_charger.h>
-#include <linux/power/max17042_battery.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/mfd/max8997.h>
-#include <linux/mfd/max8997-private.h>
-#include <linux/mmc/host.h>
-#include <linux/fb.h>
-#include <linux/pwm_backlight.h>
-
-#include <video/platform_lcd.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <plat/adc.h>
-#include <plat/regs-serial.h>
-#include <plat/exynos4.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/sdhci.h>
-#include <plat/ehci.h>
-#include <plat/clock.h>
-#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
-#include <plat/mfc.h>
-#include <plat/pd.h>
-
-#include <mach/map.h>
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define NURI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define NURI_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define NURI_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S5PV210_UFCON_TXTRIG256 | \
- S5PV210_UFCON_RXTRIG256)
-
-enum fixed_regulator_id {
- FIXED_REG_ID_MMC = 0,
- FIXED_REG_ID_MAX8903,
-};
-
-static struct s3c2410_uartcfg nuri_uartcfgs[] __initdata = {
- {
- .hwport = 0,
- .ucon = NURI_UCON_DEFAULT,
- .ulcon = NURI_ULCON_DEFAULT,
- .ufcon = NURI_UFCON_DEFAULT,
- },
- {
- .hwport = 1,
- .ucon = NURI_UCON_DEFAULT,
- .ulcon = NURI_ULCON_DEFAULT,
- .ufcon = NURI_UFCON_DEFAULT,
- },
- {
- .hwport = 2,
- .ucon = NURI_UCON_DEFAULT,
- .ulcon = NURI_ULCON_DEFAULT,
- .ufcon = NURI_UFCON_DEFAULT,
- },
- {
- .hwport = 3,
- .ucon = NURI_UCON_DEFAULT,
- .ulcon = NURI_ULCON_DEFAULT,
- .ufcon = NURI_UFCON_DEFAULT,
- },
-};
-
-/* eMMC */
-static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = {
- .max_width = 8,
- .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
- MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
- MMC_CAP_DISABLE | MMC_CAP_ERASE),
- .cd_type = S3C_SDHCI_CD_PERMANENT,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static struct regulator_consumer_supply emmc_supplies[] = {
- REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
- REGULATOR_SUPPLY("vmmc", "dw_mmc"),
-};
-
-static struct regulator_init_data emmc_fixed_voltage_init_data = {
- .constraints = {
- .name = "VMEM_VDD_2.8V",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(emmc_supplies),
- .consumer_supplies = emmc_supplies,
-};
-
-static struct fixed_voltage_config emmc_fixed_voltage_config = {
- .supply_name = "MASSMEMORY_EN (inverted)",
- .microvolts = 2800000,
- .gpio = EXYNOS4_GPL1(1),
- .enable_high = false,
- .init_data = &emmc_fixed_voltage_init_data,
-};
-
-static struct platform_device emmc_fixed_voltage = {
- .name = "reg-fixed-voltage",
- .id = FIXED_REG_ID_MMC,
- .dev = {
- .platform_data = &emmc_fixed_voltage_config,
- },
-};
-
-/* SD */
-static struct s3c_sdhci_platdata nuri_hsmmc2_data __initdata = {
- .max_width = 4,
- .host_caps = MMC_CAP_4_BIT_DATA |
- MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
- MMC_CAP_DISABLE,
- .ext_cd_gpio = EXYNOS4_GPX3(3), /* XEINT_27 */
- .ext_cd_gpio_invert = 1,
- .cd_type = S3C_SDHCI_CD_GPIO,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-/* WLAN */
-static struct s3c_sdhci_platdata nuri_hsmmc3_data __initdata = {
- .max_width = 4,
- .host_caps = MMC_CAP_4_BIT_DATA |
- MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
- .cd_type = S3C_SDHCI_CD_EXTERNAL,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static void __init nuri_sdhci_init(void)
-{
- s3c_sdhci0_set_platdata(&nuri_hsmmc0_data);
- s3c_sdhci2_set_platdata(&nuri_hsmmc2_data);
- s3c_sdhci3_set_platdata(&nuri_hsmmc3_data);
-}
-
-/* GPIO KEYS */
-static struct gpio_keys_button nuri_gpio_keys_tables[] = {
- {
- .code = KEY_VOLUMEUP,
- .gpio = EXYNOS4_GPX2(0), /* XEINT16 */
- .desc = "gpio-keys: KEY_VOLUMEUP",
- .type = EV_KEY,
- .active_low = 1,
- .debounce_interval = 1,
- }, {
- .code = KEY_VOLUMEDOWN,
- .gpio = EXYNOS4_GPX2(1), /* XEINT17 */
- .desc = "gpio-keys: KEY_VOLUMEDOWN",
- .type = EV_KEY,
- .active_low = 1,
- .debounce_interval = 1,
- }, {
- .code = KEY_POWER,
- .gpio = EXYNOS4_GPX2(7), /* XEINT23 */
- .desc = "gpio-keys: KEY_POWER",
- .type = EV_KEY,
- .active_low = 1,
- .wakeup = 1,
- .debounce_interval = 1,
- },
-};
-
-static struct gpio_keys_platform_data nuri_gpio_keys_data = {
- .buttons = nuri_gpio_keys_tables,
- .nbuttons = ARRAY_SIZE(nuri_gpio_keys_tables),
-};
-
-static struct platform_device nuri_gpio_keys = {
- .name = "gpio-keys",
- .dev = {
- .platform_data = &nuri_gpio_keys_data,
- },
-};
-
-static void nuri_lcd_power_on(struct plat_lcd_data *pd, unsigned int power)
-{
- int gpio = EXYNOS4_GPE1(5);
-
- gpio_request(gpio, "LVDS_nSHDN");
- gpio_direction_output(gpio, power);
- gpio_free(gpio);
-}
-
-static int nuri_bl_init(struct device *dev)
-{
- int ret, gpio = EXYNOS4_GPE2(3);
-
- ret = gpio_request(gpio, "LCD_LDO_EN");
- if (!ret)
- gpio_direction_output(gpio, 0);
-
- return ret;
-}
-
-static int nuri_bl_notify(struct device *dev, int brightness)
-{
- if (brightness < 1)
- brightness = 0;
-
- gpio_set_value(EXYNOS4_GPE2(3), 1);
-
- return brightness;
-}
-
-static void nuri_bl_exit(struct device *dev)
-{
- gpio_free(EXYNOS4_GPE2(3));
-}
-
-/* nuri pwm backlight */
-static struct platform_pwm_backlight_data nuri_backlight_data = {
- .pwm_id = 0,
- .pwm_period_ns = 30000,
- .max_brightness = 100,
- .dft_brightness = 50,
- .init = nuri_bl_init,
- .notify = nuri_bl_notify,
- .exit = nuri_bl_exit,
-};
-
-static struct platform_device nuri_backlight_device = {
- .name = "pwm-backlight",
- .id = -1,
- .dev = {
- .parent = &s3c_device_timer[0].dev,
- .platform_data = &nuri_backlight_data,
- },
-};
-
-static struct plat_lcd_data nuri_lcd_platform_data = {
- .set_power = nuri_lcd_power_on,
-};
-
-static struct platform_device nuri_lcd_device = {
- .name = "platform-lcd",
- .id = -1,
- .dev = {
- .platform_data = &nuri_lcd_platform_data,
- },
-};
-
-/* I2C1 */
-static struct i2c_board_info i2c1_devs[] __initdata = {
- /* Gyro, To be updated */
-};
-
-/* TSP */
-static u8 mxt_init_vals[] = {
- /* MXT_GEN_COMMAND(6) */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- /* MXT_GEN_POWER(7) */
- 0x20, 0xff, 0x32,
- /* MXT_GEN_ACQUIRE(8) */
- 0x0a, 0x00, 0x05, 0x00, 0x00, 0x00, 0x09, 0x23,
- /* MXT_TOUCH_MULTI(9) */
- 0x00, 0x00, 0x00, 0x13, 0x0b, 0x00, 0x00, 0x00, 0x02, 0x00,
- 0x00, 0x01, 0x01, 0x0e, 0x0a, 0x0a, 0x0a, 0x0a, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00,
- /* MXT_TOUCH_KEYARRAY(15) */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00,
- 0x00,
- /* MXT_SPT_GPIOPWM(19) */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- /* MXT_PROCI_GRIPFACE(20) */
- 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x28, 0x04,
- 0x0f, 0x0a,
- /* MXT_PROCG_NOISE(22) */
- 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x23, 0x00,
- 0x00, 0x05, 0x0f, 0x19, 0x23, 0x2d, 0x03,
- /* MXT_TOUCH_PROXIMITY(23) */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00,
- /* MXT_PROCI_ONETOUCH(24) */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- /* MXT_SPT_SELFTEST(25) */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00,
- /* MXT_PROCI_TWOTOUCH(27) */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- /* MXT_SPT_CTECONFIG(28) */
- 0x00, 0x00, 0x02, 0x08, 0x10, 0x00,
-};
-
-static struct mxt_platform_data mxt_platform_data = {
- .config = mxt_init_vals,
- .config_length = ARRAY_SIZE(mxt_init_vals),
-
- .x_line = 18,
- .y_line = 11,
- .x_size = 1024,
- .y_size = 600,
- .blen = 0x1,
- .threshold = 0x28,
- .voltage = 2800000, /* 2.8V */
- .orient = MXT_DIAGONAL_COUNTER,
- .irqflags = IRQF_TRIGGER_FALLING,
-};
-
-static struct s3c2410_platform_i2c i2c3_data __initdata = {
- .flags = 0,
- .bus_num = 3,
- .slave_addr = 0x10,
- .frequency = 400 * 1000,
- .sda_delay = 100,
-};
-
-static struct i2c_board_info i2c3_devs[] __initdata = {
- {
- I2C_BOARD_INFO("atmel_mxt_ts", 0x4a),
- .platform_data = &mxt_platform_data,
- .irq = IRQ_EINT(4),
- },
-};
-
-static void __init nuri_tsp_init(void)
-{
- int gpio;
-
- /* TOUCH_INT: XEINT_4 */
- gpio = EXYNOS4_GPX0(4);
- gpio_request(gpio, "TOUCH_INT");
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
-}
-
-static struct regulator_consumer_supply __initdata max8997_ldo1_[] = {
- REGULATOR_SUPPLY("vdd", "s5p-adc"), /* Used by CPU's ADC drv */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo3_[] = {
- REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), /* MIPI */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo4_[] = {
- REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"), /* MIPI */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo5_[] = {
- REGULATOR_SUPPLY("vhsic", "modemctl"), /* MODEM */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo7_[] = {
- REGULATOR_SUPPLY("dig_18", "0-001f"), /* HCD803 */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo8_[] = {
- REGULATOR_SUPPLY("vusb_d", NULL), /* Used by CPU */
- REGULATOR_SUPPLY("vdac", NULL), /* Used by CPU */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo11_[] = {
- REGULATOR_SUPPLY("vcc", "platform-lcd"), /* U804 LVDS */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo12_[] = {
- REGULATOR_SUPPLY("vddio", "6-003c"), /* HDC802 */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo13_[] = {
- REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"), /* TFLASH */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo14_[] = {
- REGULATOR_SUPPLY("inmotor", "max8997-haptic"),
-};
-static struct regulator_consumer_supply __initdata max8997_ldo15_[] = {
- REGULATOR_SUPPLY("avdd", "3-004a"), /* Touch Screen */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo16_[] = {
- REGULATOR_SUPPLY("d_sensor", "0-001f"), /* HDC803 */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo18_[] = {
- REGULATOR_SUPPLY("vdd", "3-004a"), /* Touch Screen */
-};
-static struct regulator_consumer_supply __initdata max8997_buck1_[] = {
- REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */
-};
-static struct regulator_consumer_supply __initdata max8997_buck2_[] = {
- REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */
-};
-static struct regulator_consumer_supply __initdata max8997_buck3_[] = {
- REGULATOR_SUPPLY("vdd", "mali_dev.0"), /* G3D of Exynos 4 */
-};
-static struct regulator_consumer_supply __initdata max8997_buck4_[] = {
- REGULATOR_SUPPLY("core", "0-001f"), /* HDC803 */
-};
-static struct regulator_consumer_supply __initdata max8997_buck6_[] = {
- REGULATOR_SUPPLY("dig_28", "0-001f"), /* pin "7" of HDC803 */
-};
-static struct regulator_consumer_supply __initdata max8997_esafeout1_[] = {
- REGULATOR_SUPPLY("usb_vbus", NULL), /* CPU's USB OTG */
-};
-static struct regulator_consumer_supply __initdata max8997_esafeout2_[] = {
- REGULATOR_SUPPLY("usb_vbus", "modemctl"), /* VBUS of Modem */
-};
-
-static struct regulator_consumer_supply __initdata max8997_charger_[] = {
- REGULATOR_SUPPLY("vinchg1", "charger-manager.0"),
-};
-static struct regulator_consumer_supply __initdata max8997_chg_toff_[] = {
- REGULATOR_SUPPLY("vinchg_stop", NULL), /* for jack interrupt handlers */
-};
-
-static struct regulator_consumer_supply __initdata max8997_32khz_ap_[] = {
- REGULATOR_SUPPLY("gps_clk", "bcm4751"),
- REGULATOR_SUPPLY("bt_clk", "bcm4330-b1"),
- REGULATOR_SUPPLY("wifi_clk", "bcm433-b1"),
-};
-
-static struct regulator_init_data __initdata max8997_ldo1_data = {
- .constraints = {
- .name = "VADC_3.3V_C210",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo1_),
- .consumer_supplies = max8997_ldo1_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo2_data = {
- .constraints = {
- .name = "VALIVE_1.1V_C210",
- .min_uV = 1100000,
- .max_uV = 1100000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_ldo3_data = {
- .constraints = {
- .name = "VUSB_1.1V_C210",
- .min_uV = 1100000,
- .max_uV = 1100000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo3_),
- .consumer_supplies = max8997_ldo3_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo4_data = {
- .constraints = {
- .name = "VMIPI_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo4_),
- .consumer_supplies = max8997_ldo4_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo5_data = {
- .constraints = {
- .name = "VHSIC_1.2V_C210",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo5_),
- .consumer_supplies = max8997_ldo5_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo6_data = {
- .constraints = {
- .name = "VCC_1.8V_PDA",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_ldo7_data = {
- .constraints = {
- .name = "CAM_ISP_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo7_),
- .consumer_supplies = max8997_ldo7_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo8_data = {
- .constraints = {
- .name = "VUSB/VDAC_3.3V_C210",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo8_),
- .consumer_supplies = max8997_ldo8_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo9_data = {
- .constraints = {
- .name = "VCC_2.8V_PDA",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_ldo10_data = {
- .constraints = {
- .name = "VPLL_1.1V_C210",
- .min_uV = 1100000,
- .max_uV = 1100000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_ldo11_data = {
- .constraints = {
- .name = "LVDS_VDD3.3V",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .boot_on = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo11_),
- .consumer_supplies = max8997_ldo11_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo12_data = {
- .constraints = {
- .name = "VT_CAM_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo12_),
- .consumer_supplies = max8997_ldo12_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo13_data = {
- .constraints = {
- .name = "VTF_2.8V",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo13_),
- .consumer_supplies = max8997_ldo13_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo14_data = {
- .constraints = {
- .name = "VCC_3.0V_MOTOR",
- .min_uV = 3000000,
- .max_uV = 3000000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo14_),
- .consumer_supplies = max8997_ldo14_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo15_data = {
- .constraints = {
- .name = "VTOUCH_ADVV2.8V",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo15_),
- .consumer_supplies = max8997_ldo15_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo16_data = {
- .constraints = {
- .name = "CAM_SENSOR_IO_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo16_),
- .consumer_supplies = max8997_ldo16_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo18_data = {
- .constraints = {
- .name = "VTOUCH_VDD2.8V",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo18_),
- .consumer_supplies = max8997_ldo18_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo21_data = {
- .constraints = {
- .name = "VDDQ_M1M2_1.2V",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_buck1_data = {
- .constraints = {
- .name = "VARM_1.2V_C210",
- .min_uV = 900000,
- .max_uV = 1350000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .always_on = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_buck1_),
- .consumer_supplies = max8997_buck1_,
-};
-
-static struct regulator_init_data __initdata max8997_buck2_data = {
- .constraints = {
- .name = "VINT_1.1V_C210",
- .min_uV = 900000,
- .max_uV = 1100000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .always_on = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_buck2_),
- .consumer_supplies = max8997_buck2_,
-};
-
-static struct regulator_init_data __initdata max8997_buck3_data = {
- .constraints = {
- .name = "VG3D_1.1V_C210",
- .min_uV = 900000,
- .max_uV = 1100000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_buck3_),
- .consumer_supplies = max8997_buck3_,
-};
-
-static struct regulator_init_data __initdata max8997_buck4_data = {
- .constraints = {
- .name = "CAM_ISP_CORE_1.2V",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_buck4_),
- .consumer_supplies = max8997_buck4_,
-};
-
-static struct regulator_init_data __initdata max8997_buck5_data = {
- .constraints = {
- .name = "VMEM_1.2V_C210",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_buck6_data = {
- .constraints = {
- .name = "CAM_AF_2.8V",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_buck6_),
- .consumer_supplies = max8997_buck6_,
-};
-
-static struct regulator_init_data __initdata max8997_buck7_data = {
- .constraints = {
- .name = "VCC_SUB_2.0V",
- .min_uV = 2000000,
- .max_uV = 2000000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_32khz_ap_data = {
- .constraints = {
- .name = "32KHz AP",
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_32khz_ap_),
- .consumer_supplies = max8997_32khz_ap_,
-};
-
-static struct regulator_init_data __initdata max8997_32khz_cp_data = {
- .constraints = {
- .name = "32KHz CP",
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_vichg_data = {
- .constraints = {
- .name = "VICHG",
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_esafeout1_data = {
- .constraints = {
- .name = "SAFEOUT1",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_esafeout1_),
- .consumer_supplies = max8997_esafeout1_,
-};
-
-static struct regulator_init_data __initdata max8997_esafeout2_data = {
- .constraints = {
- .name = "SAFEOUT2",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_esafeout2_),
- .consumer_supplies = max8997_esafeout2_,
-};
-
-static struct regulator_init_data __initdata max8997_charger_cv_data = {
- .constraints = {
- .name = "CHARGER_CV",
- .min_uV = 4200000,
- .max_uV = 4200000,
- .apply_uV = 1,
- },
-};
-
-static struct regulator_init_data __initdata max8997_charger_data = {
- .constraints = {
- .name = "CHARGER",
- .min_uA = 200000,
- .max_uA = 950000,
- .boot_on = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_CURRENT,
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_charger_),
- .consumer_supplies = max8997_charger_,
-};
-
-static struct regulator_init_data __initdata max8997_charger_topoff_data = {
- .constraints = {
- .name = "CHARGER TOPOFF",
- .min_uA = 50000,
- .max_uA = 200000,
- .valid_ops_mask = REGULATOR_CHANGE_CURRENT,
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_chg_toff_),
- .consumer_supplies = max8997_chg_toff_,
-};
-
-static struct max8997_regulator_data __initdata nuri_max8997_regulators[] = {
- { MAX8997_LDO1, &max8997_ldo1_data },
- { MAX8997_LDO2, &max8997_ldo2_data },
- { MAX8997_LDO3, &max8997_ldo3_data },
- { MAX8997_LDO4, &max8997_ldo4_data },
- { MAX8997_LDO5, &max8997_ldo5_data },
- { MAX8997_LDO6, &max8997_ldo6_data },
- { MAX8997_LDO7, &max8997_ldo7_data },
- { MAX8997_LDO8, &max8997_ldo8_data },
- { MAX8997_LDO9, &max8997_ldo9_data },
- { MAX8997_LDO10, &max8997_ldo10_data },
- { MAX8997_LDO11, &max8997_ldo11_data },
- { MAX8997_LDO12, &max8997_ldo12_data },
- { MAX8997_LDO13, &max8997_ldo13_data },
- { MAX8997_LDO14, &max8997_ldo14_data },
- { MAX8997_LDO15, &max8997_ldo15_data },
- { MAX8997_LDO16, &max8997_ldo16_data },
-
- { MAX8997_LDO18, &max8997_ldo18_data },
- { MAX8997_LDO21, &max8997_ldo21_data },
-
- { MAX8997_BUCK1, &max8997_buck1_data },
- { MAX8997_BUCK2, &max8997_buck2_data },
- { MAX8997_BUCK3, &max8997_buck3_data },
- { MAX8997_BUCK4, &max8997_buck4_data },
- { MAX8997_BUCK5, &max8997_buck5_data },
- { MAX8997_BUCK6, &max8997_buck6_data },
- { MAX8997_BUCK7, &max8997_buck7_data },
-
- { MAX8997_EN32KHZ_AP, &max8997_32khz_ap_data },
- { MAX8997_EN32KHZ_CP, &max8997_32khz_cp_data },
-
- { MAX8997_ENVICHG, &max8997_vichg_data },
- { MAX8997_ESAFEOUT1, &max8997_esafeout1_data },
- { MAX8997_ESAFEOUT2, &max8997_esafeout2_data },
- { MAX8997_CHARGER_CV, &max8997_charger_cv_data },
- { MAX8997_CHARGER, &max8997_charger_data },
- { MAX8997_CHARGER_TOPOFF, &max8997_charger_topoff_data },
-};
-
-static struct max8997_platform_data __initdata nuri_max8997_pdata = {
- .wakeup = 1,
-
- .num_regulators = ARRAY_SIZE(nuri_max8997_regulators),
- .regulators = nuri_max8997_regulators,
-
- .buck125_gpios = { EXYNOS4_GPX0(5), EXYNOS4_GPX0(6), EXYNOS4_GPL0(0) },
- .buck2_gpiodvs = true,
-
- .buck1_voltage[0] = 1350000, /* 1.35V */
- .buck1_voltage[1] = 1300000, /* 1.3V */
- .buck1_voltage[2] = 1250000, /* 1.25V */
- .buck1_voltage[3] = 1200000, /* 1.2V */
- .buck1_voltage[4] = 1150000, /* 1.15V */
- .buck1_voltage[5] = 1100000, /* 1.1V */
- .buck1_voltage[6] = 1000000, /* 1.0V */
- .buck1_voltage[7] = 950000, /* 0.95V */
-
- .buck2_voltage[0] = 1100000, /* 1.1V */
- .buck2_voltage[1] = 1000000, /* 1.0V */
- .buck2_voltage[2] = 950000, /* 0.95V */
- .buck2_voltage[3] = 900000, /* 0.9V */
- .buck2_voltage[4] = 1100000, /* 1.1V */
- .buck2_voltage[5] = 1000000, /* 1.0V */
- .buck2_voltage[6] = 950000, /* 0.95V */
- .buck2_voltage[7] = 900000, /* 0.9V */
-
- .buck5_voltage[0] = 1200000, /* 1.2V */
- .buck5_voltage[1] = 1200000, /* 1.2V */
- .buck5_voltage[2] = 1200000, /* 1.2V */
- .buck5_voltage[3] = 1200000, /* 1.2V */
- .buck5_voltage[4] = 1200000, /* 1.2V */
- .buck5_voltage[5] = 1200000, /* 1.2V */
- .buck5_voltage[6] = 1200000, /* 1.2V */
- .buck5_voltage[7] = 1200000, /* 1.2V */
-};
-
-/* GPIO I2C 5 (PMIC) */
-enum { I2C5_MAX8997 };
-static struct i2c_board_info i2c5_devs[] __initdata = {
- [I2C5_MAX8997] = {
- I2C_BOARD_INFO("max8997", 0xCC >> 1),
- .platform_data = &nuri_max8997_pdata,
- },
-};
-
-static struct max17042_platform_data nuri_battery_platform_data = {
-};
-
-/* GPIO I2C 9 (Fuel Gauge) */
-static struct i2c_gpio_platform_data i2c9_gpio_data = {
- .sda_pin = EXYNOS4_GPY4(0), /* XM0ADDR_8 */
- .scl_pin = EXYNOS4_GPY4(1), /* XM0ADDR_9 */
-};
-static struct platform_device i2c9_gpio = {
- .name = "i2c-gpio",
- .id = 9,
- .dev = {
- .platform_data = &i2c9_gpio_data,
- },
-};
-enum { I2C9_MAX17042};
-static struct i2c_board_info i2c9_devs[] __initdata = {
- [I2C9_MAX17042] = {
- I2C_BOARD_INFO("max17042", 0x36),
- .platform_data = &nuri_battery_platform_data,
- },
-};
-
-/* MAX8903 Secondary Charger */
-static struct regulator_consumer_supply supplies_max8903[] = {
- REGULATOR_SUPPLY("vinchg2", "charger-manager.0"),
-};
-
-static struct regulator_init_data max8903_charger_en_data = {
- .constraints = {
- .name = "VOUT_CHARGER",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(supplies_max8903),
- .consumer_supplies = supplies_max8903,
-};
-
-static struct fixed_voltage_config max8903_charger_en = {
- .supply_name = "VOUT_CHARGER",
- .microvolts = 5000000, /* Assume 5VDC */
- .gpio = EXYNOS4_GPY4(5), /* TA_EN negaged */
- .enable_high = 0, /* Enable = Low */
- .enabled_at_boot = 1,
- .init_data = &max8903_charger_en_data,
-};
-
-static struct platform_device max8903_fixed_reg_dev = {
- .name = "reg-fixed-voltage",
- .id = FIXED_REG_ID_MAX8903,
- .dev = { .platform_data = &max8903_charger_en },
-};
-
-static struct max8903_pdata nuri_max8903 = {
- /*
- * cen: don't control with the driver, let it be
- * controlled by regulator above
- */
- .dok = EXYNOS4_GPX1(4), /* TA_nCONNECTED */
- /* uok, usus: not connected */
- .chg = EXYNOS4_GPE2(0), /* TA_nCHG */
- /* flt: vcc_1.8V_pda */
- .dcm = EXYNOS4_GPL0(1), /* CURR_ADJ */
-
- .dc_valid = true,
- .usb_valid = false, /* USB is not wired to MAX8903 */
-};
-
-static struct platform_device nuri_max8903_device = {
- .name = "max8903-charger",
- .dev = {
- .platform_data = &nuri_max8903,
- },
-};
-
-static struct device *nuri_cm_devices[] = {
- &s3c_device_i2c5.dev,
- &s3c_device_adc.dev,
- NULL, /* Reserved for UART */
- NULL,
-};
-
-static void __init nuri_power_init(void)
-{
- int gpio;
- int irq_base = IRQ_GPIO_END + 1;
- int ta_en = 0;
-
- nuri_max8997_pdata.irq_base = irq_base;
- irq_base += MAX8997_IRQ_NR;
-
- gpio = EXYNOS4_GPX0(7);
- gpio_request(gpio, "AP_PMIC_IRQ");
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-
- gpio = EXYNOS4_GPX2(3);
- gpio_request(gpio, "FUEL_ALERT");
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-
- gpio = nuri_max8903.dok;
- gpio_request(gpio, "TA_nCONNECTED");
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- ta_en = gpio_get_value(gpio) ? 0 : 1;
-
- gpio = nuri_max8903.chg;
- gpio_request(gpio, "TA_nCHG");
- gpio_direction_input(gpio);
-
- gpio = nuri_max8903.dcm;
- gpio_request(gpio, "CURR_ADJ");
- gpio_direction_output(gpio, ta_en);
-}
-
-/* USB EHCI */
-static struct s5p_ehci_platdata nuri_ehci_pdata;
-
-static void __init nuri_ehci_init(void)
-{
- struct s5p_ehci_platdata *pdata = &nuri_ehci_pdata;
-
- s5p_ehci_set_platdata(pdata);
-}
-
-static struct platform_device *nuri_devices[] __initdata = {
- /* Samsung Platform Devices */
- &s3c_device_i2c5, /* PMIC should initialize first */
- &emmc_fixed_voltage,
- &s3c_device_hsmmc0,
- &s3c_device_hsmmc2,
- &s3c_device_hsmmc3,
- &s3c_device_wdt,
- &s3c_device_timer[0],
- &s5p_device_ehci,
- &s3c_device_i2c3,
- &i2c9_gpio,
- &s3c_device_adc,
- &s3c_device_rtc,
- &s5p_device_mfc,
- &s5p_device_mfc_l,
- &s5p_device_mfc_r,
- &exynos4_device_pd[PD_MFC],
-
- /* NURI Devices */
- &nuri_gpio_keys,
- &nuri_lcd_device,
- &nuri_backlight_device,
- &max8903_fixed_reg_dev,
- &nuri_max8903_device,
-};
-
-static void __init nuri_map_io(void)
-{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
- s3c24xx_init_clocks(24000000);
- s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
-}
-
-static void __init nuri_reserve(void)
-{
- s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
-}
-
-static void __init nuri_machine_init(void)
-{
- nuri_sdhci_init();
- nuri_tsp_init();
- nuri_power_init();
-
- i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
- s3c_i2c3_set_platdata(&i2c3_data);
- i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
- s3c_i2c5_set_platdata(NULL);
- i2c5_devs[I2C5_MAX8997].irq = gpio_to_irq(EXYNOS4_GPX0(7));
- i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
- i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3));
- i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs));
-
- nuri_ehci_init();
- clk_xusbxti.rate = 24000000;
-
- /* Last */
- platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
- s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
-}
-
-MACHINE_START(NURI, "NURI")
- /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
- .atag_offset = 0x100,
- .init_irq = exynos4_init_irq,
- .map_io = nuri_map_io,
- .init_machine = nuri_machine_init,
- .timer = &exynos4_timer,
- .reserve = &nuri_reserve,
-MACHINE_END
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/mach-origen.c
- *
- * Copyright (c) 2011 Insignal Co., Ltd.
- * http://www.insignal.co.kr/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/serial_core.h>
-#include <linux/gpio.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/input.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <plat/exynos4.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/sdhci.h>
-#include <plat/iic.h>
-
-#include <mach/map.h>
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define ORIGEN_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define ORIGEN_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define ORIGEN_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S5PV210_UFCON_TXTRIG4 | \
- S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = ORIGEN_UCON_DEFAULT,
- .ulcon = ORIGEN_ULCON_DEFAULT,
- .ufcon = ORIGEN_UFCON_DEFAULT,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = ORIGEN_UCON_DEFAULT,
- .ulcon = ORIGEN_ULCON_DEFAULT,
- .ufcon = ORIGEN_UFCON_DEFAULT,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = ORIGEN_UCON_DEFAULT,
- .ulcon = ORIGEN_ULCON_DEFAULT,
- .ufcon = ORIGEN_UFCON_DEFAULT,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = ORIGEN_UCON_DEFAULT,
- .ulcon = ORIGEN_ULCON_DEFAULT,
- .ufcon = ORIGEN_UFCON_DEFAULT,
- },
-};
-
-static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPK2(2),
- .ext_cd_gpio_invert = 1,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static struct platform_device *origen_devices[] __initdata = {
- &s3c_device_hsmmc2,
- &s3c_device_rtc,
- &s3c_device_wdt,
-};
-
-static void __init origen_map_io(void)
-{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
- s3c24xx_init_clocks(24000000);
- s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
-}
-
-static void __init origen_machine_init(void)
-{
- s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
- platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
-}
-
-MACHINE_START(ORIGEN, "ORIGEN")
- /* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */
- .atag_offset = 0x100,
- .init_irq = exynos4_init_irq,
- .map_io = origen_map_io,
- .init_machine = origen_machine_init,
- .timer = &exynos4_timer,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-exynos4/mach-smdk4x12.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/mfd/max8997.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/pwm_backlight.h>
-#include <linux/regulator/machine.h>
-#include <linux/serial_core.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <plat/backlight.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/exynos4.h>
-#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
-#include <plat/keypad.h>
-#include <plat/regs-serial.h>
-#include <plat/sdhci.h>
-
-#include <mach/map.h>
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define SMDK4X12_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDK4X12_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define SMDK4X12_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S5PV210_UFCON_TXTRIG4 | \
- S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg smdk4x12_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = SMDK4X12_UCON_DEFAULT,
- .ulcon = SMDK4X12_ULCON_DEFAULT,
- .ufcon = SMDK4X12_UFCON_DEFAULT,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = SMDK4X12_UCON_DEFAULT,
- .ulcon = SMDK4X12_ULCON_DEFAULT,
- .ufcon = SMDK4X12_UFCON_DEFAULT,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = SMDK4X12_UCON_DEFAULT,
- .ulcon = SMDK4X12_ULCON_DEFAULT,
- .ufcon = SMDK4X12_UFCON_DEFAULT,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = SMDK4X12_UCON_DEFAULT,
- .ulcon = SMDK4X12_ULCON_DEFAULT,
- .ufcon = SMDK4X12_UFCON_DEFAULT,
- },
-};
-
-static struct s3c_sdhci_platdata smdk4x12_hsmmc2_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_INTERNAL,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
- .max_width = 8,
- .host_caps = MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdk4x12_hsmmc3_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_INTERNAL,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static struct regulator_consumer_supply max8997_buck1 =
- REGULATOR_SUPPLY("vdd_arm", NULL);
-
-static struct regulator_consumer_supply max8997_buck2 =
- REGULATOR_SUPPLY("vdd_int", NULL);
-
-static struct regulator_consumer_supply max8997_buck3 =
- REGULATOR_SUPPLY("vdd_g3d", NULL);
-
-static struct regulator_init_data max8997_buck1_data = {
- .constraints = {
- .name = "VDD_ARM_SMDK4X12",
- .min_uV = 925000,
- .max_uV = 1350000,
- .always_on = 1,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &max8997_buck1,
-};
-
-static struct regulator_init_data max8997_buck2_data = {
- .constraints = {
- .name = "VDD_INT_SMDK4X12",
- .min_uV = 950000,
- .max_uV = 1150000,
- .always_on = 1,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &max8997_buck2,
-};
-
-static struct regulator_init_data max8997_buck3_data = {
- .constraints = {
- .name = "VDD_G3D_SMDK4X12",
- .min_uV = 950000,
- .max_uV = 1150000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &max8997_buck3,
-};
-
-static struct max8997_regulator_data smdk4x12_max8997_regulators[] = {
- { MAX8997_BUCK1, &max8997_buck1_data },
- { MAX8997_BUCK2, &max8997_buck2_data },
- { MAX8997_BUCK3, &max8997_buck3_data },
-};
-
-static struct max8997_platform_data smdk4x12_max8997_pdata = {
- .num_regulators = ARRAY_SIZE(smdk4x12_max8997_regulators),
- .regulators = smdk4x12_max8997_regulators,
-
- .buck1_voltage[0] = 1100000, /* 1.1V */
- .buck1_voltage[1] = 1100000, /* 1.1V */
- .buck1_voltage[2] = 1100000, /* 1.1V */
- .buck1_voltage[3] = 1100000, /* 1.1V */
- .buck1_voltage[4] = 1100000, /* 1.1V */
- .buck1_voltage[5] = 1100000, /* 1.1V */
- .buck1_voltage[6] = 1000000, /* 1.0V */
- .buck1_voltage[7] = 950000, /* 0.95V */
-
- .buck2_voltage[0] = 1100000, /* 1.1V */
- .buck2_voltage[1] = 1000000, /* 1.0V */
- .buck2_voltage[2] = 950000, /* 0.95V */
- .buck2_voltage[3] = 900000, /* 0.9V */
- .buck2_voltage[4] = 1100000, /* 1.1V */
- .buck2_voltage[5] = 1000000, /* 1.0V */
- .buck2_voltage[6] = 950000, /* 0.95V */
- .buck2_voltage[7] = 900000, /* 0.9V */
-
- .buck5_voltage[0] = 1100000, /* 1.1V */
- .buck5_voltage[1] = 1100000, /* 1.1V */
- .buck5_voltage[2] = 1100000, /* 1.1V */
- .buck5_voltage[3] = 1100000, /* 1.1V */
- .buck5_voltage[4] = 1100000, /* 1.1V */
- .buck5_voltage[5] = 1100000, /* 1.1V */
- .buck5_voltage[6] = 1100000, /* 1.1V */
- .buck5_voltage[7] = 1100000, /* 1.1V */
-};
-
-static struct i2c_board_info smdk4x12_i2c_devs0[] __initdata = {
- {
- I2C_BOARD_INFO("max8997", 0x66),
- .platform_data = &smdk4x12_max8997_pdata,
- }
-};
-
-static struct i2c_board_info smdk4x12_i2c_devs1[] __initdata = {
- { I2C_BOARD_INFO("wm8994", 0x1a), }
-};
-
-static struct i2c_board_info smdk4x12_i2c_devs3[] __initdata = {
- /* nothing here yet */
-};
-
-static struct i2c_board_info smdk4x12_i2c_devs7[] __initdata = {
- /* nothing here yet */
-};
-
-static struct samsung_bl_gpio_info smdk4x12_bl_gpio_info = {
- .no = EXYNOS4_GPD0(1),
- .func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdk4x12_bl_data = {
- .pwm_id = 1,
- .pwm_period_ns = 1000,
-};
-
-static uint32_t smdk4x12_keymap[] __initdata = {
- /* KEY(row, col, keycode) */
- KEY(1, 0, KEY_D), KEY(1, 1, KEY_A), KEY(1, 2, KEY_B),
- KEY(1, 3, KEY_E), KEY(1, 4, KEY_C)
-};
-
-static struct matrix_keymap_data smdk4x12_keymap_data __initdata = {
- .keymap = smdk4x12_keymap,
- .keymap_size = ARRAY_SIZE(smdk4x12_keymap),
-};
-
-static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = {
- .keymap_data = &smdk4x12_keymap_data,
- .rows = 2,
- .cols = 5,
-};
-
-static struct platform_device *smdk4x12_devices[] __initdata = {
- &s3c_device_hsmmc2,
- &s3c_device_hsmmc3,
- &s3c_device_i2c0,
- &s3c_device_i2c1,
- &s3c_device_i2c3,
- &s3c_device_i2c7,
- &s3c_device_rtc,
- &s3c_device_wdt,
- &samsung_device_keypad,
-};
-
-static void __init smdk4x12_map_io(void)
-{
- clk_xusbxti.rate = 24000000;
-
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
- s3c24xx_init_clocks(clk_xusbxti.rate);
- s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
-}
-
-static void __init smdk4x12_machine_init(void)
-{
- s3c_i2c0_set_platdata(NULL);
- i2c_register_board_info(0, smdk4x12_i2c_devs0,
- ARRAY_SIZE(smdk4x12_i2c_devs0));
-
- s3c_i2c1_set_platdata(NULL);
- i2c_register_board_info(1, smdk4x12_i2c_devs1,
- ARRAY_SIZE(smdk4x12_i2c_devs1));
-
- s3c_i2c3_set_platdata(NULL);
- i2c_register_board_info(3, smdk4x12_i2c_devs3,
- ARRAY_SIZE(smdk4x12_i2c_devs3));
-
- s3c_i2c7_set_platdata(NULL);
- i2c_register_board_info(7, smdk4x12_i2c_devs7,
- ARRAY_SIZE(smdk4x12_i2c_devs7));
-
- samsung_bl_set(&smdk4x12_bl_gpio_info, &smdk4x12_bl_data);
-
- samsung_keypad_set_platdata(&smdk4x12_keypad_data);
-
- s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata);
- s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata);
-
- platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices));
-}
-
-MACHINE_START(SMDK4212, "SMDK4212")
- /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .atag_offset = 0x100,
- .init_irq = exynos4_init_irq,
- .map_io = smdk4x12_map_io,
- .init_machine = smdk4x12_machine_init,
- .timer = &exynos4_timer,
-MACHINE_END
-
-MACHINE_START(SMDK4412, "SMDK4412")
- /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- /* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
- .atag_offset = 0x100,
- .init_irq = exynos4_init_irq,
- .map_io = smdk4x12_map_io,
- .init_machine = smdk4x12_machine_init,
- .timer = &exynos4_timer,
-MACHINE_END
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/mach-smdkv310.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/serial_core.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/lcd.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/smsc911x.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/input.h>
-#include <linux/pwm_backlight.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <video/platform_lcd.h>
-#include <plat/regs-serial.h>
-#include <plat/regs-srom.h>
-#include <plat/regs-fb-v4.h>
-#include <plat/exynos4.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <plat/keypad.h>
-#include <plat/sdhci.h>
-#include <plat/iic.h>
-#include <plat/pd.h>
-#include <plat/gpio-cfg.h>
-#include <plat/backlight.h>
-
-#include <mach/map.h>
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define SMDKV310_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDKV310_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define SMDKV310_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S5PV210_UFCON_TXTRIG4 | \
- S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = SMDKV310_UCON_DEFAULT,
- .ulcon = SMDKV310_ULCON_DEFAULT,
- .ufcon = SMDKV310_UFCON_DEFAULT,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = SMDKV310_UCON_DEFAULT,
- .ulcon = SMDKV310_ULCON_DEFAULT,
- .ufcon = SMDKV310_UFCON_DEFAULT,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = SMDKV310_UCON_DEFAULT,
- .ulcon = SMDKV310_ULCON_DEFAULT,
- .ufcon = SMDKV310_UFCON_DEFAULT,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = SMDKV310_UCON_DEFAULT,
- .ulcon = SMDKV310_ULCON_DEFAULT,
- .ufcon = SMDKV310_UFCON_DEFAULT,
- },
-};
-
-static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_INTERNAL,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
- .max_width = 8,
- .host_caps = MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdkv310_hsmmc1_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPK0(2),
- .ext_cd_gpio_invert = 1,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_INTERNAL,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
- .max_width = 8,
- .host_caps = MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdkv310_hsmmc3_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPK2(2),
- .ext_cd_gpio_invert = 1,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
- unsigned int power)
-{
- if (power) {
-#if !defined(CONFIG_BACKLIGHT_PWM)
- gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0");
- gpio_free(EXYNOS4_GPD0(1));
-#endif
- /* fire nRESET on power up */
- gpio_request(EXYNOS4_GPX0(6), "GPX0");
-
- gpio_direction_output(EXYNOS4_GPX0(6), 1);
- mdelay(100);
-
- gpio_set_value(EXYNOS4_GPX0(6), 0);
- mdelay(10);
-
- gpio_set_value(EXYNOS4_GPX0(6), 1);
- mdelay(10);
-
- gpio_free(EXYNOS4_GPX0(6));
- } else {
-#if !defined(CONFIG_BACKLIGHT_PWM)
- gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0");
- gpio_free(EXYNOS4_GPD0(1));
-#endif
- }
-}
-
-static struct plat_lcd_data smdkv310_lcd_lte480wv_data = {
- .set_power = lcd_lte480wv_set_power,
-};
-
-static struct platform_device smdkv310_lcd_lte480wv = {
- .name = "platform-lcd",
- .dev.parent = &s5p_device_fimd0.dev,
- .dev.platform_data = &smdkv310_lcd_lte480wv_data,
-};
-
-static struct s3c_fb_pd_win smdkv310_fb_win0 = {
- .win_mode = {
- .left_margin = 13,
- .right_margin = 8,
- .upper_margin = 7,
- .lower_margin = 5,
- .hsync_len = 3,
- .vsync_len = 1,
- .xres = 800,
- .yres = 480,
- },
- .max_bpp = 32,
- .default_bpp = 24,
-};
-
-static struct s3c_fb_platdata smdkv310_lcd0_pdata __initdata = {
- .win[0] = &smdkv310_fb_win0,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
-};
-
-static struct resource smdkv310_smsc911x_resources[] = {
- [0] = {
- .start = EXYNOS4_PA_SROM_BANK(1),
- .end = EXYNOS4_PA_SROM_BANK(1) + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_EINT(5),
- .end = IRQ_EINT(5),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct smsc911x_platform_config smsc9215_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
-};
-
-static struct platform_device smdkv310_smsc911x = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smdkv310_smsc911x_resources),
- .resource = smdkv310_smsc911x_resources,
- .dev = {
- .platform_data = &smsc9215_config,
- },
-};
-
-static uint32_t smdkv310_keymap[] __initdata = {
- /* KEY(row, col, keycode) */
- KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
- KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
- KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
- KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
-};
-
-static struct matrix_keymap_data smdkv310_keymap_data __initdata = {
- .keymap = smdkv310_keymap,
- .keymap_size = ARRAY_SIZE(smdkv310_keymap),
-};
-
-static struct samsung_keypad_platdata smdkv310_keypad_data __initdata = {
- .keymap_data = &smdkv310_keymap_data,
- .rows = 2,
- .cols = 8,
-};
-
-static struct i2c_board_info i2c_devs1[] __initdata = {
- {I2C_BOARD_INFO("wm8994", 0x1a),},
-};
-
-static struct platform_device *smdkv310_devices[] __initdata = {
- &s3c_device_hsmmc0,
- &s3c_device_hsmmc1,
- &s3c_device_hsmmc2,
- &s3c_device_hsmmc3,
- &s3c_device_i2c1,
- &s3c_device_rtc,
- &s3c_device_wdt,
- &exynos4_device_ac97,
- &exynos4_device_i2s0,
- &samsung_device_keypad,
- &exynos4_device_pd[PD_MFC],
- &exynos4_device_pd[PD_G3D],
- &exynos4_device_pd[PD_LCD0],
- &exynos4_device_pd[PD_LCD1],
- &exynos4_device_pd[PD_CAM],
- &exynos4_device_pd[PD_TV],
- &exynos4_device_pd[PD_GPS],
- &exynos4_device_spdif,
- &exynos4_device_sysmmu,
- &samsung_asoc_dma,
- &samsung_asoc_idma,
- &s5p_device_fimd0,
- &smdkv310_lcd_lte480wv,
- &smdkv310_smsc911x,
- &exynos4_device_ahci,
-};
-
-static void __init smdkv310_smsc911x_init(void)
-{
- u32 cs1;
-
- /* configure nCS1 width to 16 bits */
- cs1 = __raw_readl(S5P_SROM_BW) &
- ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
- cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
- (1 << S5P_SROM_BW__WAITENABLE__SHIFT) |
- (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
- S5P_SROM_BW__NCS1__SHIFT;
- __raw_writel(cs1, S5P_SROM_BW);
-
- /* set timing for nCS1 suitable for ethernet chip */
- __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
- (0x9 << S5P_SROM_BCX__TACP__SHIFT) |
- (0xc << S5P_SROM_BCX__TCAH__SHIFT) |
- (0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
- (0x6 << S5P_SROM_BCX__TACC__SHIFT) |
- (0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
- (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
-}
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info smdkv310_bl_gpio_info = {
- .no = EXYNOS4_GPD0(1),
- .func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdkv310_bl_data = {
- .pwm_id = 1,
- .pwm_period_ns = 1000,
-};
-
-static void __init smdkv310_map_io(void)
-{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
- s3c24xx_init_clocks(24000000);
- s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
-}
-
-static void __init smdkv310_machine_init(void)
-{
- s3c_i2c1_set_platdata(NULL);
- i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
-
- smdkv310_smsc911x_init();
-
- s3c_sdhci0_set_platdata(&smdkv310_hsmmc0_pdata);
- s3c_sdhci1_set_platdata(&smdkv310_hsmmc1_pdata);
- s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata);
- s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata);
-
- samsung_keypad_set_platdata(&smdkv310_keypad_data);
-
- samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
- s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
-
- platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
-}
-
-MACHINE_START(SMDKV310, "SMDKV310")
- /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- /* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
- .atag_offset = 0x100,
- .init_irq = exynos4_init_irq,
- .map_io = smdkv310_map_io,
- .init_machine = smdkv310_machine_init,
- .timer = &exynos4_timer,
-MACHINE_END
-
-MACHINE_START(SMDKC210, "SMDKC210")
- /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .atag_offset = 0x100,
- .init_irq = exynos4_init_irq,
- .map_io = smdkv310_map_io,
- .init_machine = smdkv310_machine_init,
- .timer = &exynos4_timer,
-MACHINE_END
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/mach-universal_c210.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio.h>
-#include <linux/mfd/max8998.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/max8952.h>
-#include <linux/mmc/host.h>
-#include <linux/i2c-gpio.h>
-#include <linux/i2c/mcs.h>
-#include <linux/i2c/atmel_mxt_ts.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <plat/exynos4.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/iic.h>
-#include <plat/gpio-cfg.h>
-#include <plat/mfc.h>
-#include <plat/sdhci.h>
-#include <plat/pd.h>
-
-#include <mach/map.h>
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define UNIVERSAL_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define UNIVERSAL_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define UNIVERSAL_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S5PV210_UFCON_TXTRIG256 | \
- S5PV210_UFCON_RXTRIG256)
-
-static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .ucon = UNIVERSAL_UCON_DEFAULT,
- .ulcon = UNIVERSAL_ULCON_DEFAULT,
- .ufcon = UNIVERSAL_UFCON_DEFAULT,
- },
- [1] = {
- .hwport = 1,
- .ucon = UNIVERSAL_UCON_DEFAULT,
- .ulcon = UNIVERSAL_ULCON_DEFAULT,
- .ufcon = UNIVERSAL_UFCON_DEFAULT,
- },
- [2] = {
- .hwport = 2,
- .ucon = UNIVERSAL_UCON_DEFAULT,
- .ulcon = UNIVERSAL_ULCON_DEFAULT,
- .ufcon = UNIVERSAL_UFCON_DEFAULT,
- },
- [3] = {
- .hwport = 3,
- .ucon = UNIVERSAL_UCON_DEFAULT,
- .ulcon = UNIVERSAL_ULCON_DEFAULT,
- .ufcon = UNIVERSAL_UFCON_DEFAULT,
- },
-};
-
-static struct regulator_consumer_supply max8952_consumer =
- REGULATOR_SUPPLY("vdd_arm", NULL);
-
-static struct max8952_platform_data universal_max8952_pdata __initdata = {
- .gpio_vid0 = EXYNOS4_GPX0(3),
- .gpio_vid1 = EXYNOS4_GPX0(4),
- .gpio_en = -1, /* Not controllable, set "Always High" */
- .default_mode = 0, /* vid0 = 0, vid1 = 0 */
- .dvs_mode = { 48, 32, 28, 18 }, /* 1.25, 1.20, 1.05, 0.95V */
- .sync_freq = 0, /* default: fastest */
- .ramp_speed = 0, /* default: fastest */
-
- .reg_data = {
- .constraints = {
- .name = "VARM_1.2V",
- .min_uV = 770000,
- .max_uV = 1400000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .always_on = 1,
- .boot_on = 1,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &max8952_consumer,
- },
-};
-
-static struct regulator_consumer_supply lp3974_buck1_consumer =
- REGULATOR_SUPPLY("vdd_int", NULL);
-
-static struct regulator_consumer_supply lp3974_buck2_consumer =
- REGULATOR_SUPPLY("vddg3d", NULL);
-
-static struct regulator_init_data lp3974_buck1_data = {
- .constraints = {
- .name = "VINT_1.1V",
- .min_uV = 750000,
- .max_uV = 1500000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &lp3974_buck1_consumer,
-};
-
-static struct regulator_init_data lp3974_buck2_data = {
- .constraints = {
- .name = "VG3D_1.1V",
- .min_uV = 750000,
- .max_uV = 1500000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &lp3974_buck2_consumer,
-};
-
-static struct regulator_init_data lp3974_buck3_data = {
- .constraints = {
- .name = "VCC_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_buck4_data = {
- .constraints = {
- .name = "VMEM_1.2V",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_ldo2_data = {
- .constraints = {
- .name = "VALIVE_1.2V",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_ldo3_data = {
- .constraints = {
- .name = "VUSB+MIPI_1.1V",
- .min_uV = 1100000,
- .max_uV = 1100000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_ldo4_data = {
- .constraints = {
- .name = "VADC_3.3V",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_ldo5_data = {
- .constraints = {
- .name = "VTF_2.8V",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_ldo6_data = {
- .constraints = {
- .name = "LDO6",
- .min_uV = 2000000,
- .max_uV = 2000000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_ldo7_data = {
- .constraints = {
- .name = "VLCD+VMIPI_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_ldo8_data = {
- .constraints = {
- .name = "VUSB+VDAC_3.3V",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_ldo9_data = {
- .constraints = {
- .name = "VCC_2.8V",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_ldo10_data = {
- .constraints = {
- .name = "VPLL_1.1V",
- .min_uV = 1100000,
- .max_uV = 1100000,
- .boot_on = 1,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_ldo11_data = {
- .constraints = {
- .name = "CAM_AF_3.3V",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_ldo12_data = {
- .constraints = {
- .name = "PS_2.8V",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_ldo13_data = {
- .constraints = {
- .name = "VHIC_1.2V",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_ldo14_data = {
- .constraints = {
- .name = "CAM_I_HOST_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_ldo15_data = {
- .constraints = {
- .name = "CAM_S_DIG+FM33_CORE_1.2V",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_ldo16_data = {
- .constraints = {
- .name = "CAM_S_ANA_2.8V",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_ldo17_data = {
- .constraints = {
- .name = "VCC_3.0V_LCD",
- .min_uV = 3000000,
- .max_uV = 3000000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_32khz_ap_data = {
- .constraints = {
- .name = "32KHz AP",
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_32khz_cp_data = {
- .constraints = {
- .name = "32KHz CP",
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_vichg_data = {
- .constraints = {
- .name = "VICHG",
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_esafeout1_data = {
- .constraints = {
- .name = "SAFEOUT1",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .enabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_esafeout2_data = {
- .constraints = {
- .name = "SAFEOUT2",
- .boot_on = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .enabled = 1,
- },
- },
-};
-
-static struct max8998_regulator_data lp3974_regulators[] = {
- { MAX8998_LDO2, &lp3974_ldo2_data },
- { MAX8998_LDO3, &lp3974_ldo3_data },
- { MAX8998_LDO4, &lp3974_ldo4_data },
- { MAX8998_LDO5, &lp3974_ldo5_data },
- { MAX8998_LDO6, &lp3974_ldo6_data },
- { MAX8998_LDO7, &lp3974_ldo7_data },
- { MAX8998_LDO8, &lp3974_ldo8_data },
- { MAX8998_LDO9, &lp3974_ldo9_data },
- { MAX8998_LDO10, &lp3974_ldo10_data },
- { MAX8998_LDO11, &lp3974_ldo11_data },
- { MAX8998_LDO12, &lp3974_ldo12_data },
- { MAX8998_LDO13, &lp3974_ldo13_data },
- { MAX8998_LDO14, &lp3974_ldo14_data },
- { MAX8998_LDO15, &lp3974_ldo15_data },
- { MAX8998_LDO16, &lp3974_ldo16_data },
- { MAX8998_LDO17, &lp3974_ldo17_data },
- { MAX8998_BUCK1, &lp3974_buck1_data },
- { MAX8998_BUCK2, &lp3974_buck2_data },
- { MAX8998_BUCK3, &lp3974_buck3_data },
- { MAX8998_BUCK4, &lp3974_buck4_data },
- { MAX8998_EN32KHZ_AP, &lp3974_32khz_ap_data },
- { MAX8998_EN32KHZ_CP, &lp3974_32khz_cp_data },
- { MAX8998_ENVICHG, &lp3974_vichg_data },
- { MAX8998_ESAFEOUT1, &lp3974_esafeout1_data },
- { MAX8998_ESAFEOUT2, &lp3974_esafeout2_data },
-};
-
-static struct max8998_platform_data universal_lp3974_pdata = {
- .num_regulators = ARRAY_SIZE(lp3974_regulators),
- .regulators = lp3974_regulators,
- .buck1_voltage1 = 1100000, /* INT */
- .buck1_voltage2 = 1000000,
- .buck1_voltage3 = 1100000,
- .buck1_voltage4 = 1000000,
- .buck1_set1 = EXYNOS4_GPX0(5),
- .buck1_set2 = EXYNOS4_GPX0(6),
- .buck2_voltage1 = 1200000, /* G3D */
- .buck2_voltage2 = 1100000,
- .buck1_default_idx = 0,
- .buck2_set3 = EXYNOS4_GPE2(0),
- .buck2_default_idx = 0,
- .wakeup = true,
-};
-
-/* GPIO I2C 5 (PMIC) */
-static struct i2c_board_info i2c5_devs[] __initdata = {
- {
- I2C_BOARD_INFO("max8952", 0xC0 >> 1),
- .platform_data = &universal_max8952_pdata,
- }, {
- I2C_BOARD_INFO("lp3974", 0xCC >> 1),
- .platform_data = &universal_lp3974_pdata,
- },
-};
-
-/* I2C3 (TSP) */
-static struct mxt_platform_data qt602240_platform_data = {
- .x_line = 19,
- .y_line = 11,
- .x_size = 800,
- .y_size = 480,
- .blen = 0x11,
- .threshold = 0x28,
- .voltage = 2800000, /* 2.8V */
- .orient = MXT_DIAGONAL,
-};
-
-static struct i2c_board_info i2c3_devs[] __initdata = {
- {
- I2C_BOARD_INFO("qt602240_ts", 0x4a),
- .platform_data = &qt602240_platform_data,
- },
-};
-
-static void __init universal_tsp_init(void)
-{
- int gpio;
-
- /* TSP_LDO_ON: XMDMADDR_11 */
- gpio = EXYNOS4_GPE2(3);
- gpio_request(gpio, "TSP_LDO_ON");
- gpio_direction_output(gpio, 1);
- gpio_export(gpio, 0);
-
- /* TSP_INT: XMDMADDR_7 */
- gpio = EXYNOS4_GPE1(7);
- gpio_request(gpio, "TSP_INT");
-
- s5p_register_gpio_interrupt(gpio);
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
- i2c3_devs[0].irq = gpio_to_irq(gpio);
-}
-
-
-/* GPIO I2C 12 (3 Touchkey) */
-static uint32_t touchkey_keymap[] = {
- /* MCS_KEY_MAP(value, keycode) */
- MCS_KEY_MAP(0, KEY_MENU), /* KEY_SEND */
- MCS_KEY_MAP(1, KEY_BACK), /* KEY_END */
-};
-
-static struct mcs_platform_data touchkey_data = {
- .keymap = touchkey_keymap,
- .keymap_size = ARRAY_SIZE(touchkey_keymap),
- .key_maxval = 2,
-};
-
-/* GPIO I2C 3_TOUCH 2.8V */
-#define I2C_GPIO_BUS_12 12
-static struct i2c_gpio_platform_data i2c_gpio12_data = {
- .sda_pin = EXYNOS4_GPE4(0), /* XMDMDATA_8 */
- .scl_pin = EXYNOS4_GPE4(1), /* XMDMDATA_9 */
-};
-
-static struct platform_device i2c_gpio12 = {
- .name = "i2c-gpio",
- .id = I2C_GPIO_BUS_12,
- .dev = {
- .platform_data = &i2c_gpio12_data,
- },
-};
-
-static struct i2c_board_info i2c_gpio12_devs[] __initdata = {
- {
- I2C_BOARD_INFO("mcs5080_touchkey", 0x20),
- .platform_data = &touchkey_data,
- },
-};
-
-static void __init universal_touchkey_init(void)
-{
- int gpio;
-
- gpio = EXYNOS4_GPE3(7); /* XMDMDATA_7 */
- gpio_request(gpio, "3_TOUCH_INT");
- s5p_register_gpio_interrupt(gpio);
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
- i2c_gpio12_devs[0].irq = gpio_to_irq(gpio);
-
- gpio = EXYNOS4_GPE3(3); /* XMDMDATA_3 */
- gpio_request(gpio, "3_TOUCH_EN");
- gpio_direction_output(gpio, 1);
-}
-
-/* GPIO KEYS */
-static struct gpio_keys_button universal_gpio_keys_tables[] = {
- {
- .code = KEY_VOLUMEUP,
- .gpio = EXYNOS4_GPX2(0), /* XEINT16 */
- .desc = "gpio-keys: KEY_VOLUMEUP",
- .type = EV_KEY,
- .active_low = 1,
- .debounce_interval = 1,
- }, {
- .code = KEY_VOLUMEDOWN,
- .gpio = EXYNOS4_GPX2(1), /* XEINT17 */
- .desc = "gpio-keys: KEY_VOLUMEDOWN",
- .type = EV_KEY,
- .active_low = 1,
- .debounce_interval = 1,
- }, {
- .code = KEY_CONFIG,
- .gpio = EXYNOS4_GPX2(2), /* XEINT18 */
- .desc = "gpio-keys: KEY_CONFIG",
- .type = EV_KEY,
- .active_low = 1,
- .debounce_interval = 1,
- }, {
- .code = KEY_CAMERA,
- .gpio = EXYNOS4_GPX2(3), /* XEINT19 */
- .desc = "gpio-keys: KEY_CAMERA",
- .type = EV_KEY,
- .active_low = 1,
- .debounce_interval = 1,
- }, {
- .code = KEY_OK,
- .gpio = EXYNOS4_GPX3(5), /* XEINT29 */
- .desc = "gpio-keys: KEY_OK",
- .type = EV_KEY,
- .active_low = 1,
- .debounce_interval = 1,
- },
-};
-
-static struct gpio_keys_platform_data universal_gpio_keys_data = {
- .buttons = universal_gpio_keys_tables,
- .nbuttons = ARRAY_SIZE(universal_gpio_keys_tables),
-};
-
-static struct platform_device universal_gpio_keys = {
- .name = "gpio-keys",
- .dev = {
- .platform_data = &universal_gpio_keys_data,
- },
-};
-
-/* eMMC */
-static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = {
- .max_width = 8,
- .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
- MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
- MMC_CAP_DISABLE),
- .cd_type = S3C_SDHCI_CD_PERMANENT,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static struct regulator_consumer_supply mmc0_supplies[] = {
- REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
-};
-
-static struct regulator_init_data mmc0_fixed_voltage_init_data = {
- .constraints = {
- .name = "VMEM_VDD_2.8V",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(mmc0_supplies),
- .consumer_supplies = mmc0_supplies,
-};
-
-static struct fixed_voltage_config mmc0_fixed_voltage_config = {
- .supply_name = "MASSMEMORY_EN",
- .microvolts = 2800000,
- .gpio = EXYNOS4_GPE1(3),
- .enable_high = true,
- .init_data = &mmc0_fixed_voltage_init_data,
-};
-
-static struct platform_device mmc0_fixed_voltage = {
- .name = "reg-fixed-voltage",
- .id = 0,
- .dev = {
- .platform_data = &mmc0_fixed_voltage_config,
- },
-};
-
-/* SD */
-static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = {
- .max_width = 4,
- .host_caps = MMC_CAP_4_BIT_DATA |
- MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
- MMC_CAP_DISABLE,
- .ext_cd_gpio = EXYNOS4_GPX3(4), /* XEINT_28 */
- .ext_cd_gpio_invert = 1,
- .cd_type = S3C_SDHCI_CD_GPIO,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-/* WiFi */
-static struct s3c_sdhci_platdata universal_hsmmc3_data __initdata = {
- .max_width = 4,
- .host_caps = MMC_CAP_4_BIT_DATA |
- MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
- MMC_CAP_DISABLE,
- .cd_type = S3C_SDHCI_CD_EXTERNAL,
-};
-
-static void __init universal_sdhci_init(void)
-{
- s3c_sdhci0_set_platdata(&universal_hsmmc0_data);
- s3c_sdhci2_set_platdata(&universal_hsmmc2_data);
- s3c_sdhci3_set_platdata(&universal_hsmmc3_data);
-}
-
-/* I2C0 */
-static struct i2c_board_info i2c0_devs[] __initdata = {
- /* Camera, To be updated */
-};
-
-/* I2C1 */
-static struct i2c_board_info i2c1_devs[] __initdata = {
- /* Gyro, To be updated */
-};
-
-static struct platform_device *universal_devices[] __initdata = {
- /* Samsung Platform Devices */
- &s5p_device_fimc0,
- &s5p_device_fimc1,
- &s5p_device_fimc2,
- &s5p_device_fimc3,
- &mmc0_fixed_voltage,
- &s3c_device_hsmmc0,
- &s3c_device_hsmmc2,
- &s3c_device_hsmmc3,
- &s3c_device_i2c3,
- &s3c_device_i2c5,
-
- /* Universal Devices */
- &i2c_gpio12,
- &universal_gpio_keys,
- &s5p_device_onenand,
- &s5p_device_mfc,
- &s5p_device_mfc_l,
- &s5p_device_mfc_r,
- &exynos4_device_pd[PD_MFC],
-};
-
-static void __init universal_map_io(void)
-{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
- s3c24xx_init_clocks(24000000);
- s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
-}
-
-static void __init universal_reserve(void)
-{
- s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
-}
-
-static void __init universal_machine_init(void)
-{
- universal_sdhci_init();
-
- i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
- i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
-
- universal_tsp_init();
- s3c_i2c3_set_platdata(NULL);
- i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
-
- s3c_i2c5_set_platdata(NULL);
- i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
-
- universal_touchkey_init();
- i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs,
- ARRAY_SIZE(i2c_gpio12_devs));
-
- /* Last */
- platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
- s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
-}
-
-MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
- /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
- .atag_offset = 0x100,
- .init_irq = exynos4_init_irq,
- .map_io = universal_map_io,
- .init_machine = universal_machine_init,
- .timer = &exynos4_timer,
- .reserve = &universal_reserve,
-MACHINE_END
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/mct.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 MCT(Multi-Core Timer) support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/clockchips.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/percpu.h>
-
-#include <asm/hardware/gic.h>
-
-#include <plat/cpu.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <mach/regs-mct.h>
-#include <asm/mach/time.h>
-
-enum {
- MCT_INT_SPI,
- MCT_INT_PPI
-};
-
-static unsigned long clk_cnt_per_tick;
-static unsigned long clk_rate;
-static unsigned int mct_int_type;
-
-struct mct_clock_event_device {
- struct clock_event_device *evt;
- void __iomem *base;
- char name[10];
-};
-
-struct mct_clock_event_device mct_tick[NR_CPUS];
-
-static void exynos4_mct_write(unsigned int value, void *addr)
-{
- void __iomem *stat_addr;
- u32 mask;
- u32 i;
-
- __raw_writel(value, addr);
-
- if (likely(addr >= EXYNOS4_MCT_L_BASE(0))) {
- u32 base = (u32) addr & EXYNOS4_MCT_L_MASK;
- switch ((u32) addr & ~EXYNOS4_MCT_L_MASK) {
- case (u32) MCT_L_TCON_OFFSET:
- stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
- mask = 1 << 3; /* L_TCON write status */
- break;
- case (u32) MCT_L_ICNTB_OFFSET:
- stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
- mask = 1 << 1; /* L_ICNTB write status */
- break;
- case (u32) MCT_L_TCNTB_OFFSET:
- stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
- mask = 1 << 0; /* L_TCNTB write status */
- break;
- default:
- return;
- }
- } else {
- switch ((u32) addr) {
- case (u32) EXYNOS4_MCT_G_TCON:
- stat_addr = EXYNOS4_MCT_G_WSTAT;
- mask = 1 << 16; /* G_TCON write status */
- break;
- case (u32) EXYNOS4_MCT_G_COMP0_L:
- stat_addr = EXYNOS4_MCT_G_WSTAT;
- mask = 1 << 0; /* G_COMP0_L write status */
- break;
- case (u32) EXYNOS4_MCT_G_COMP0_U:
- stat_addr = EXYNOS4_MCT_G_WSTAT;
- mask = 1 << 1; /* G_COMP0_U write status */
- break;
- case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR:
- stat_addr = EXYNOS4_MCT_G_WSTAT;
- mask = 1 << 2; /* G_COMP0_ADD_INCR w status */
- break;
- case (u32) EXYNOS4_MCT_G_CNT_L:
- stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
- mask = 1 << 0; /* G_CNT_L write status */
- break;
- case (u32) EXYNOS4_MCT_G_CNT_U:
- stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
- mask = 1 << 1; /* G_CNT_U write status */
- break;
- default:
- return;
- }
- }
-
- /* Wait maximum 1 ms until written values are applied */
- for (i = 0; i < loops_per_jiffy / 1000 * HZ; i++)
- if (__raw_readl(stat_addr) & mask) {
- __raw_writel(mask, stat_addr);
- return;
- }
-
- panic("MCT hangs after writing %d (addr:0x%08x)\n", value, (u32)addr);
-}
-
-/* Clocksource handling */
-static void exynos4_mct_frc_start(u32 hi, u32 lo)
-{
- u32 reg;
-
- exynos4_mct_write(lo, EXYNOS4_MCT_G_CNT_L);
- exynos4_mct_write(hi, EXYNOS4_MCT_G_CNT_U);
-
- reg = __raw_readl(EXYNOS4_MCT_G_TCON);
- reg |= MCT_G_TCON_START;
- exynos4_mct_write(reg, EXYNOS4_MCT_G_TCON);
-}
-
-static cycle_t exynos4_frc_read(struct clocksource *cs)
-{
- unsigned int lo, hi;
- u32 hi2 = __raw_readl(EXYNOS4_MCT_G_CNT_U);
-
- do {
- hi = hi2;
- lo = __raw_readl(EXYNOS4_MCT_G_CNT_L);
- hi2 = __raw_readl(EXYNOS4_MCT_G_CNT_U);
- } while (hi != hi2);
-
- return ((cycle_t)hi << 32) | lo;
-}
-
-static void exynos4_frc_resume(struct clocksource *cs)
-{
- exynos4_mct_frc_start(0, 0);
-}
-
-struct clocksource mct_frc = {
- .name = "mct-frc",
- .rating = 400,
- .read = exynos4_frc_read,
- .mask = CLOCKSOURCE_MASK(64),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
- .resume = exynos4_frc_resume,
-};
-
-static void __init exynos4_clocksource_init(void)
-{
- exynos4_mct_frc_start(0, 0);
-
- if (clocksource_register_hz(&mct_frc, clk_rate))
- panic("%s: can't register clocksource\n", mct_frc.name);
-}
-
-static void exynos4_mct_comp0_stop(void)
-{
- unsigned int tcon;
-
- tcon = __raw_readl(EXYNOS4_MCT_G_TCON);
- tcon &= ~(MCT_G_TCON_COMP0_ENABLE | MCT_G_TCON_COMP0_AUTO_INC);
-
- exynos4_mct_write(tcon, EXYNOS4_MCT_G_TCON);
- exynos4_mct_write(0, EXYNOS4_MCT_G_INT_ENB);
-}
-
-static void exynos4_mct_comp0_start(enum clock_event_mode mode,
- unsigned long cycles)
-{
- unsigned int tcon;
- cycle_t comp_cycle;
-
- tcon = __raw_readl(EXYNOS4_MCT_G_TCON);
-
- if (mode == CLOCK_EVT_MODE_PERIODIC) {
- tcon |= MCT_G_TCON_COMP0_AUTO_INC;
- exynos4_mct_write(cycles, EXYNOS4_MCT_G_COMP0_ADD_INCR);
- }
-
- comp_cycle = exynos4_frc_read(&mct_frc) + cycles;
- exynos4_mct_write((u32)comp_cycle, EXYNOS4_MCT_G_COMP0_L);
- exynos4_mct_write((u32)(comp_cycle >> 32), EXYNOS4_MCT_G_COMP0_U);
-
- exynos4_mct_write(0x1, EXYNOS4_MCT_G_INT_ENB);
-
- tcon |= MCT_G_TCON_COMP0_ENABLE;
- exynos4_mct_write(tcon , EXYNOS4_MCT_G_TCON);
-}
-
-static int exynos4_comp_set_next_event(unsigned long cycles,
- struct clock_event_device *evt)
-{
- exynos4_mct_comp0_start(evt->mode, cycles);
-
- return 0;
-}
-
-static void exynos4_comp_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- exynos4_mct_comp0_stop();
-
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- exynos4_mct_comp0_start(mode, clk_cnt_per_tick);
- break;
-
- case CLOCK_EVT_MODE_ONESHOT:
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- case CLOCK_EVT_MODE_RESUME:
- break;
- }
-}
-
-static struct clock_event_device mct_comp_device = {
- .name = "mct-comp",
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .rating = 250,
- .set_next_event = exynos4_comp_set_next_event,
- .set_mode = exynos4_comp_set_mode,
-};
-
-static irqreturn_t exynos4_mct_comp_isr(int irq, void *dev_id)
-{
- struct clock_event_device *evt = dev_id;
-
- exynos4_mct_write(0x1, EXYNOS4_MCT_G_INT_CSTAT);
-
- evt->event_handler(evt);
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction mct_comp_event_irq = {
- .name = "mct_comp_irq",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = exynos4_mct_comp_isr,
- .dev_id = &mct_comp_device,
-};
-
-static void exynos4_clockevent_init(void)
-{
- clk_cnt_per_tick = clk_rate / 2 / HZ;
-
- clockevents_calc_mult_shift(&mct_comp_device, clk_rate / 2, 5);
- mct_comp_device.max_delta_ns =
- clockevent_delta2ns(0xffffffff, &mct_comp_device);
- mct_comp_device.min_delta_ns =
- clockevent_delta2ns(0xf, &mct_comp_device);
- mct_comp_device.cpumask = cpumask_of(0);
- clockevents_register_device(&mct_comp_device);
-
- setup_irq(IRQ_MCT_G0, &mct_comp_event_irq);
-}
-
-#ifdef CONFIG_LOCAL_TIMERS
-/* Clock event handling */
-static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt)
-{
- unsigned long tmp;
- unsigned long mask = MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START;
- void __iomem *addr = mevt->base + MCT_L_TCON_OFFSET;
-
- tmp = __raw_readl(addr);
- if (tmp & mask) {
- tmp &= ~mask;
- exynos4_mct_write(tmp, addr);
- }
-}
-
-static void exynos4_mct_tick_start(unsigned long cycles,
- struct mct_clock_event_device *mevt)
-{
- unsigned long tmp;
-
- exynos4_mct_tick_stop(mevt);
-
- tmp = (1 << 31) | cycles; /* MCT_L_UPDATE_ICNTB */
-
- /* update interrupt count buffer */
- exynos4_mct_write(tmp, mevt->base + MCT_L_ICNTB_OFFSET);
-
- /* enable MCT tick interrupt */
- exynos4_mct_write(0x1, mevt->base + MCT_L_INT_ENB_OFFSET);
-
- tmp = __raw_readl(mevt->base + MCT_L_TCON_OFFSET);
- tmp |= MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START |
- MCT_L_TCON_INTERVAL_MODE;
- exynos4_mct_write(tmp, mevt->base + MCT_L_TCON_OFFSET);
-}
-
-static int exynos4_tick_set_next_event(unsigned long cycles,
- struct clock_event_device *evt)
-{
- struct mct_clock_event_device *mevt = &mct_tick[smp_processor_id()];
-
- exynos4_mct_tick_start(cycles, mevt);
-
- return 0;
-}
-
-static inline void exynos4_tick_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- struct mct_clock_event_device *mevt = &mct_tick[smp_processor_id()];
-
- exynos4_mct_tick_stop(mevt);
-
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- exynos4_mct_tick_start(clk_cnt_per_tick, mevt);
- break;
-
- case CLOCK_EVT_MODE_ONESHOT:
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- case CLOCK_EVT_MODE_RESUME:
- break;
- }
-}
-
-static int exynos4_mct_tick_clear(struct mct_clock_event_device *mevt)
-{
- struct clock_event_device *evt = mevt->evt;
-
- /*
- * This is for supporting oneshot mode.
- * Mct would generate interrupt periodically
- * without explicit stopping.
- */
- if (evt->mode != CLOCK_EVT_MODE_PERIODIC)
- exynos4_mct_tick_stop(mevt);
-
- /* Clear the MCT tick interrupt */
- if (__raw_readl(mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) {
- exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
- return 1;
- } else {
- return 0;
- }
-}
-
-static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
-{
- struct mct_clock_event_device *mevt = dev_id;
- struct clock_event_device *evt = mevt->evt;
-
- exynos4_mct_tick_clear(mevt);
-
- evt->event_handler(evt);
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction mct_tick0_event_irq = {
- .name = "mct_tick0_irq",
- .flags = IRQF_TIMER | IRQF_NOBALANCING,
- .handler = exynos4_mct_tick_isr,
-};
-
-static struct irqaction mct_tick1_event_irq = {
- .name = "mct_tick1_irq",
- .flags = IRQF_TIMER | IRQF_NOBALANCING,
- .handler = exynos4_mct_tick_isr,
-};
-
-static void exynos4_mct_tick_init(struct clock_event_device *evt)
-{
- unsigned int cpu = smp_processor_id();
-
- mct_tick[cpu].evt = evt;
-
- mct_tick[cpu].base = EXYNOS4_MCT_L_BASE(cpu);
- sprintf(mct_tick[cpu].name, "mct_tick%d", cpu);
-
- evt->name = mct_tick[cpu].name;
- evt->cpumask = cpumask_of(cpu);
- evt->set_next_event = exynos4_tick_set_next_event;
- evt->set_mode = exynos4_tick_set_mode;
- evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
- evt->rating = 450;
-
- clockevents_calc_mult_shift(evt, clk_rate / 2, 5);
- evt->max_delta_ns =
- clockevent_delta2ns(0x7fffffff, evt);
- evt->min_delta_ns =
- clockevent_delta2ns(0xf, evt);
-
- clockevents_register_device(evt);
-
- exynos4_mct_write(0x1, mct_tick[cpu].base + MCT_L_TCNTB_OFFSET);
-
- if (mct_int_type == MCT_INT_SPI) {
- if (cpu == 0) {
- mct_tick0_event_irq.dev_id = &mct_tick[cpu];
- evt->irq = IRQ_MCT_L0;
- setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq);
- } else {
- mct_tick1_event_irq.dev_id = &mct_tick[cpu];
- evt->irq = IRQ_MCT_L1;
- setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
- irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
- }
- } else {
- gic_enable_ppi(IRQ_MCT_LOCALTIMER);
- }
-}
-
-/* Setup the local clock events for a CPU */
-int __cpuinit local_timer_setup(struct clock_event_device *evt)
-{
- exynos4_mct_tick_init(evt);
-
- return 0;
-}
-
-void local_timer_stop(struct clock_event_device *evt)
-{
- evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
- disable_irq(evt->irq);
-}
-
-#endif /* CONFIG_LOCAL_TIMERS */
-
-static void __init exynos4_timer_resources(void)
-{
- struct clk *mct_clk;
- mct_clk = clk_get(NULL, "xtal");
-
- clk_rate = clk_get_rate(mct_clk);
-}
-
-static void __init exynos4_timer_init(void)
-{
- if (soc_is_exynos4210())
- mct_int_type = MCT_INT_SPI;
- else
- mct_int_type = MCT_INT_PPI;
-
- exynos4_timer_resources();
- exynos4_clocksource_init();
- exynos4_clockevent_init();
-}
-
-struct sys_timer exynos4_timer = {
- .init = exynos4_timer_init,
-};
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/platsmp.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Cloned from linux/arch/arm/mach-vexpress/platsmp.c
- *
- * Copyright (C) 2002 ARM Ltd.
- * All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/jiffies.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-
-#include <asm/cacheflush.h>
-#include <asm/hardware/gic.h>
-#include <asm/smp_scu.h>
-#include <asm/unified.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-pmu.h>
-
-#include <plat/cpu.h>
-
-extern unsigned int gic_bank_offset;
-extern void exynos4_secondary_startup(void);
-
-#define CPU1_BOOT_REG (samsung_rev() == EXYNOS4210_REV_1_1 ? \
- S5P_INFORM5 : S5P_VA_SYSRAM)
-
-/*
- * control for which core is the next to come out of the secondary
- * boot "holding pen"
- */
-
-volatile int __cpuinitdata pen_release = -1;
-
-/*
- * Write pen_release in a way that is guaranteed to be visible to all
- * observers, irrespective of whether they're taking part in coherency
- * or not. This is necessary for the hotplug code to work reliably.
- */
-static void write_pen_release(int val)
-{
- pen_release = val;
- smp_wmb();
- __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
- outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
-}
-
-static void __iomem *scu_base_addr(void)
-{
- return (void __iomem *)(S5P_VA_SCU);
-}
-
-static DEFINE_SPINLOCK(boot_lock);
-
-static void __cpuinit exynos4_gic_secondary_init(void)
-{
- void __iomem *dist_base = S5P_VA_GIC_DIST +
- (gic_bank_offset * smp_processor_id());
- void __iomem *cpu_base = S5P_VA_GIC_CPU +
- (gic_bank_offset * smp_processor_id());
- int i;
-
- /*
- * Deal with the banked PPI and SGI interrupts - disable all
- * PPI interrupts, ensure all SGI interrupts are enabled.
- */
- __raw_writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
- __raw_writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
-
- /*
- * Set priority on PPI and SGI interrupts
- */
- for (i = 0; i < 32; i += 4)
- __raw_writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
-
- __raw_writel(0xf0, cpu_base + GIC_CPU_PRIMASK);
- __raw_writel(1, cpu_base + GIC_CPU_CTRL);
-}
-
-void __cpuinit platform_secondary_init(unsigned int cpu)
-{
- /*
- * if any interrupts are already enabled for the primary
- * core (e.g. timer irq), then they will not have been enabled
- * for us: do so
- */
- exynos4_gic_secondary_init();
-
- /*
- * let the primary processor know we're out of the
- * pen, then head off into the C entry point
- */
- write_pen_release(-1);
-
- /*
- * Synchronise with the boot thread.
- */
- spin_lock(&boot_lock);
- spin_unlock(&boot_lock);
-
- set_cpu_online(cpu, true);
-}
-
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
- unsigned long timeout;
-
- /*
- * Set synchronisation state between this boot processor
- * and the secondary one
- */
- spin_lock(&boot_lock);
-
- /*
- * The secondary processor is waiting to be released from
- * the holding pen - release it, then wait for it to flag
- * that it has been released by resetting pen_release.
- *
- * Note that "pen_release" is the hardware CPU ID, whereas
- * "cpu" is Linux's internal ID.
- */
- write_pen_release(cpu_logical_map(cpu));
-
- if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) {
- __raw_writel(S5P_CORE_LOCAL_PWR_EN,
- S5P_ARM_CORE1_CONFIGURATION);
-
- timeout = 10;
-
- /* wait max 10 ms until cpu1 is on */
- while ((__raw_readl(S5P_ARM_CORE1_STATUS)
- & S5P_CORE_LOCAL_PWR_EN) != S5P_CORE_LOCAL_PWR_EN) {
- if (timeout-- == 0)
- break;
-
- mdelay(1);
- }
-
- if (timeout == 0) {
- printk(KERN_ERR "cpu1 power enable failed");
- spin_unlock(&boot_lock);
- return -ETIMEDOUT;
- }
- }
- /*
- * Send the secondary CPU a soft interrupt, thereby causing
- * the boot monitor to read the system wide flags register,
- * and branch to the address found there.
- */
-
- timeout = jiffies + (1 * HZ);
- while (time_before(jiffies, timeout)) {
- smp_rmb();
-
- __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)),
- CPU1_BOOT_REG);
- gic_raise_softirq(cpumask_of(cpu), 1);
-
- if (pen_release == -1)
- break;
-
- udelay(10);
- }
-
- /*
- * now the secondary core is starting up let it run its
- * calibrations, then wait for it to finish
- */
- spin_unlock(&boot_lock);
-
- return pen_release != -1 ? -ENOSYS : 0;
-}
-
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system.
- */
-
-void __init smp_init_cpus(void)
-{
- void __iomem *scu_base = scu_base_addr();
- unsigned int i, ncores;
-
- ncores = scu_base ? scu_get_core_count(scu_base) : 1;
-
- /* sanity check */
- if (ncores > nr_cpu_ids) {
- pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
- ncores, nr_cpu_ids);
- ncores = nr_cpu_ids;
- }
-
- for (i = 0; i < ncores; i++)
- set_cpu_possible(i, true);
-
- set_smp_cross_call(gic_raise_softirq);
-}
-
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
-{
-
- scu_enable(scu_base_addr());
-
- /*
- * Write the address of secondary startup into the
- * system-wide flags register. The boot monitor waits
- * until it receives a soft interrupt, and then the
- * secondary CPU branches to this address.
- */
- __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)),
- CPU1_BOOT_REG);
-}
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/pm.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4210 - Power Management support
- *
- * Based on arch/arm/mach-s3c2410/pm.c
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/syscore_ops.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-
-#include <asm/cacheflush.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/pll.h>
-#include <plat/regs-srom.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-pmu.h>
-#include <mach/pm-core.h>
-#include <mach/pmu.h>
-
-static struct sleep_save exynos4_set_clksrc[] = {
- { .reg = S5P_CLKSRC_MASK_TOP , .val = 0x00000001, },
- { .reg = S5P_CLKSRC_MASK_CAM , .val = 0x11111111, },
- { .reg = S5P_CLKSRC_MASK_TV , .val = 0x00000111, },
- { .reg = S5P_CLKSRC_MASK_LCD0 , .val = 0x00001111, },
- { .reg = S5P_CLKSRC_MASK_MAUDIO , .val = 0x00000001, },
- { .reg = S5P_CLKSRC_MASK_FSYS , .val = 0x01011111, },
- { .reg = S5P_CLKSRC_MASK_PERIL0 , .val = 0x01111111, },
- { .reg = S5P_CLKSRC_MASK_PERIL1 , .val = 0x01110111, },
- { .reg = S5P_CLKSRC_MASK_DMC , .val = 0x00010000, },
-};
-
-static struct sleep_save exynos4210_set_clksrc[] = {
- { .reg = S5P_CLKSRC_MASK_LCD1 , .val = 0x00001111, },
-};
-
-static struct sleep_save exynos4_epll_save[] = {
- SAVE_ITEM(S5P_EPLL_CON0),
- SAVE_ITEM(S5P_EPLL_CON1),
-};
-
-static struct sleep_save exynos4_vpll_save[] = {
- SAVE_ITEM(S5P_VPLL_CON0),
- SAVE_ITEM(S5P_VPLL_CON1),
-};
-
-static struct sleep_save exynos4_core_save[] = {
- /* GIC side */
- SAVE_ITEM(S5P_VA_GIC_CPU + 0x000),
- SAVE_ITEM(S5P_VA_GIC_CPU + 0x004),
- SAVE_ITEM(S5P_VA_GIC_CPU + 0x008),
- SAVE_ITEM(S5P_VA_GIC_CPU + 0x00C),
- SAVE_ITEM(S5P_VA_GIC_CPU + 0x014),
- SAVE_ITEM(S5P_VA_GIC_CPU + 0x018),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x000),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x004),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x100),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x104),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x108),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x300),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x304),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x308),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x400),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x404),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x408),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x40C),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x410),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x414),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x418),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x41C),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x420),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x424),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x428),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x42C),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x430),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x434),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x438),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x43C),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x440),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x444),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x448),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x44C),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x450),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x454),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x458),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x45C),
-
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x800),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x804),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x808),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x80C),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x810),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x814),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x818),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x81C),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x820),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x824),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x828),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x82C),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x830),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x834),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x838),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x83C),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x840),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x844),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x848),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x84C),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x850),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x854),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x858),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0x85C),
-
- SAVE_ITEM(S5P_VA_GIC_DIST + 0xC00),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0xC04),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0xC08),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0xC0C),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0xC10),
- SAVE_ITEM(S5P_VA_GIC_DIST + 0xC14),
-
- SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x000),
- SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x010),
- SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x020),
- SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x030),
- SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x040),
- SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x050),
- SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x060),
- SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x070),
- SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x080),
- SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x090),
-
- /* SROM side */
- SAVE_ITEM(S5P_SROM_BW),
- SAVE_ITEM(S5P_SROM_BC0),
- SAVE_ITEM(S5P_SROM_BC1),
- SAVE_ITEM(S5P_SROM_BC2),
- SAVE_ITEM(S5P_SROM_BC3),
-};
-
-static struct sleep_save exynos4_l2cc_save[] = {
- SAVE_ITEM(S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL),
- SAVE_ITEM(S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL),
- SAVE_ITEM(S5P_VA_L2CC + L2X0_PREFETCH_CTRL),
- SAVE_ITEM(S5P_VA_L2CC + L2X0_POWER_CTRL),
- SAVE_ITEM(S5P_VA_L2CC + L2X0_AUX_CTRL),
-};
-
-/* For Cortex-A9 Diagnostic and Power control register */
-static unsigned int save_arm_register[2];
-
-static int exynos4_cpu_suspend(unsigned long arg)
-{
- outer_flush_all();
-
- /* issue the standby signal into the pm unit. */
- cpu_do_idle();
-
- /* we should never get past here */
- panic("sleep resumed to originator?");
-}
-
-static void exynos4_pm_prepare(void)
-{
- u32 tmp;
-
- s3c_pm_do_save(exynos4_core_save, ARRAY_SIZE(exynos4_core_save));
- s3c_pm_do_save(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save));
- s3c_pm_do_save(exynos4_epll_save, ARRAY_SIZE(exynos4_epll_save));
- s3c_pm_do_save(exynos4_vpll_save, ARRAY_SIZE(exynos4_vpll_save));
-
- tmp = __raw_readl(S5P_INFORM1);
-
- /* Set value of power down register for sleep mode */
-
- exynos4_sys_powerdown_conf(SYS_SLEEP);
- __raw_writel(S5P_CHECK_SLEEP, S5P_INFORM1);
-
- /* ensure at least INFORM0 has the resume address */
-
- __raw_writel(virt_to_phys(s3c_cpu_resume), S5P_INFORM0);
-
- /* Before enter central sequence mode, clock src register have to set */
-
- s3c_pm_do_restore_core(exynos4_set_clksrc, ARRAY_SIZE(exynos4_set_clksrc));
-
- if (soc_is_exynos4210())
- s3c_pm_do_restore_core(exynos4210_set_clksrc, ARRAY_SIZE(exynos4210_set_clksrc));
-
-}
-
-static int exynos4_pm_add(struct sys_device *sysdev)
-{
- pm_cpu_prep = exynos4_pm_prepare;
- pm_cpu_sleep = exynos4_cpu_suspend;
-
- return 0;
-}
-
-/* This function copy from linux/arch/arm/kernel/smp_scu.c */
-
-void exynos4_scu_enable(void __iomem *scu_base)
-{
- u32 scu_ctrl;
-
- scu_ctrl = __raw_readl(scu_base);
- /* already enabled? */
- if (scu_ctrl & 1)
- return;
-
- scu_ctrl |= 1;
- __raw_writel(scu_ctrl, scu_base);
-
- /*
- * Ensure that the data accessed by CPU0 before the SCU was
- * initialised is visible to the other CPUs.
- */
- flush_cache_all();
-}
-
-static unsigned long pll_base_rate;
-
-static void exynos4_restore_pll(void)
-{
- unsigned long pll_con, locktime, lockcnt;
- unsigned long pll_in_rate;
- unsigned int p_div, epll_wait = 0, vpll_wait = 0;
-
- if (pll_base_rate == 0)
- return;
-
- pll_in_rate = pll_base_rate;
-
- /* EPLL */
- pll_con = exynos4_epll_save[0].val;
-
- if (pll_con & (1 << 31)) {
- pll_con &= (PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT);
- p_div = (pll_con >> PLL46XX_PDIV_SHIFT);
-
- pll_in_rate /= 1000000;
-
- locktime = (3000 / pll_in_rate) * p_div;
- lockcnt = locktime * 10000 / (10000 / pll_in_rate);
-
- __raw_writel(lockcnt, S5P_EPLL_LOCK);
-
- s3c_pm_do_restore_core(exynos4_epll_save,
- ARRAY_SIZE(exynos4_epll_save));
- epll_wait = 1;
- }
-
- pll_in_rate = pll_base_rate;
-
- /* VPLL */
- pll_con = exynos4_vpll_save[0].val;
-
- if (pll_con & (1 << 31)) {
- pll_in_rate /= 1000000;
- /* 750us */
- locktime = 750;
- lockcnt = locktime * 10000 / (10000 / pll_in_rate);
-
- __raw_writel(lockcnt, S5P_VPLL_LOCK);
-
- s3c_pm_do_restore_core(exynos4_vpll_save,
- ARRAY_SIZE(exynos4_vpll_save));
- vpll_wait = 1;
- }
-
- /* Wait PLL locking */
-
- do {
- if (epll_wait) {
- pll_con = __raw_readl(S5P_EPLL_CON0);
- if (pll_con & (1 << S5P_EPLLCON0_LOCKED_SHIFT))
- epll_wait = 0;
- }
-
- if (vpll_wait) {
- pll_con = __raw_readl(S5P_VPLL_CON0);
- if (pll_con & (1 << S5P_VPLLCON0_LOCKED_SHIFT))
- vpll_wait = 0;
- }
- } while (epll_wait || vpll_wait);
-}
-
-static struct sysdev_driver exynos4_pm_driver = {
- .add = exynos4_pm_add,
-};
-
-static __init int exynos4_pm_drvinit(void)
-{
- struct clk *pll_base;
- unsigned int tmp;
-
- s3c_pm_init();
-
- /* All wakeup disable */
-
- tmp = __raw_readl(S5P_WAKEUP_MASK);
- tmp |= ((0xFF << 8) | (0x1F << 1));
- __raw_writel(tmp, S5P_WAKEUP_MASK);
-
- pll_base = clk_get(NULL, "xtal");
-
- if (!IS_ERR(pll_base)) {
- pll_base_rate = clk_get_rate(pll_base);
- clk_put(pll_base);
- }
-
- return sysdev_driver_register(&exynos4_sysclass, &exynos4_pm_driver);
-}
-arch_initcall(exynos4_pm_drvinit);
-
-static int exynos4_pm_suspend(void)
-{
- unsigned long tmp;
-
- /* Setting Central Sequence Register for power down mode */
-
- tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
- tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
- __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
-
- /* Save Power control register */
- asm ("mrc p15, 0, %0, c15, c0, 0"
- : "=r" (tmp) : : "cc");
- save_arm_register[0] = tmp;
-
- /* Save Diagnostic register */
- asm ("mrc p15, 0, %0, c15, c0, 1"
- : "=r" (tmp) : : "cc");
- save_arm_register[1] = tmp;
-
- return 0;
-}
-
-static void exynos4_pm_resume(void)
-{
- unsigned long tmp;
-
- /*
- * If PMU failed while entering sleep mode, WFI will be
- * ignored by PMU and then exiting cpu_do_idle().
- * S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically
- * in this situation.
- */
- tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
- if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) {
- tmp |= S5P_CENTRAL_LOWPWR_CFG;
- __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
- /* No need to perform below restore code */
- goto early_wakeup;
- }
- /* Restore Power control register */
- tmp = save_arm_register[0];
- asm volatile ("mcr p15, 0, %0, c15, c0, 0"
- : : "r" (tmp)
- : "cc");
-
- /* Restore Diagnostic register */
- tmp = save_arm_register[1];
- asm volatile ("mcr p15, 0, %0, c15, c0, 1"
- : : "r" (tmp)
- : "cc");
-
- /* For release retention */
-
- __raw_writel((1 << 28), S5P_PAD_RET_MAUDIO_OPTION);
- __raw_writel((1 << 28), S5P_PAD_RET_GPIO_OPTION);
- __raw_writel((1 << 28), S5P_PAD_RET_UART_OPTION);
- __raw_writel((1 << 28), S5P_PAD_RET_MMCA_OPTION);
- __raw_writel((1 << 28), S5P_PAD_RET_MMCB_OPTION);
- __raw_writel((1 << 28), S5P_PAD_RET_EBIA_OPTION);
- __raw_writel((1 << 28), S5P_PAD_RET_EBIB_OPTION);
-
- s3c_pm_do_restore_core(exynos4_core_save, ARRAY_SIZE(exynos4_core_save));
-
- exynos4_restore_pll();
-
- exynos4_scu_enable(S5P_VA_SCU);
-
-#ifdef CONFIG_CACHE_L2X0
- s3c_pm_do_restore_core(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save));
- outer_inv_all();
- /* enable L2X0*/
- writel_relaxed(1, S5P_VA_L2CC + L2X0_CTRL);
-#endif
-
-early_wakeup:
- return;
-}
-
-static struct syscore_ops exynos4_pm_syscore_ops = {
- .suspend = exynos4_pm_suspend,
- .resume = exynos4_pm_resume,
-};
-
-static __init int exynos4_pm_syscore_init(void)
-{
- register_syscore_ops(&exynos4_pm_syscore_ops);
- return 0;
-}
-arch_initcall(exynos4_pm_syscore_init);
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/pmu.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * EXYNOS4210 - CPU PMU(Power Management Unit) support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/io.h>
-#include <linux/kernel.h>
-
-#include <mach/regs-clock.h>
-#include <mach/pmu.h>
-
-static void __iomem *sys_powerdown_reg[] = {
- S5P_ARM_CORE0_LOWPWR,
- S5P_DIS_IRQ_CORE0,
- S5P_DIS_IRQ_CENTRAL0,
- S5P_ARM_CORE1_LOWPWR,
- S5P_DIS_IRQ_CORE1,
- S5P_DIS_IRQ_CENTRAL1,
- S5P_ARM_COMMON_LOWPWR,
- S5P_L2_0_LOWPWR,
- S5P_L2_1_LOWPWR,
- S5P_CMU_ACLKSTOP_LOWPWR,
- S5P_CMU_SCLKSTOP_LOWPWR,
- S5P_CMU_RESET_LOWPWR,
- S5P_APLL_SYSCLK_LOWPWR,
- S5P_MPLL_SYSCLK_LOWPWR,
- S5P_VPLL_SYSCLK_LOWPWR,
- S5P_EPLL_SYSCLK_LOWPWR,
- S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR,
- S5P_CMU_RESET_GPSALIVE_LOWPWR,
- S5P_CMU_CLKSTOP_CAM_LOWPWR,
- S5P_CMU_CLKSTOP_TV_LOWPWR,
- S5P_CMU_CLKSTOP_MFC_LOWPWR,
- S5P_CMU_CLKSTOP_G3D_LOWPWR,
- S5P_CMU_CLKSTOP_LCD0_LOWPWR,
- S5P_CMU_CLKSTOP_LCD1_LOWPWR,
- S5P_CMU_CLKSTOP_MAUDIO_LOWPWR,
- S5P_CMU_CLKSTOP_GPS_LOWPWR,
- S5P_CMU_RESET_CAM_LOWPWR,
- S5P_CMU_RESET_TV_LOWPWR,
- S5P_CMU_RESET_MFC_LOWPWR,
- S5P_CMU_RESET_G3D_LOWPWR,
- S5P_CMU_RESET_LCD0_LOWPWR,
- S5P_CMU_RESET_LCD1_LOWPWR,
- S5P_CMU_RESET_MAUDIO_LOWPWR,
- S5P_CMU_RESET_GPS_LOWPWR,
- S5P_TOP_BUS_LOWPWR,
- S5P_TOP_RETENTION_LOWPWR,
- S5P_TOP_PWR_LOWPWR,
- S5P_LOGIC_RESET_LOWPWR,
- S5P_ONENAND_MEM_LOWPWR,
- S5P_MODIMIF_MEM_LOWPWR,
- S5P_G2D_ACP_MEM_LOWPWR,
- S5P_USBOTG_MEM_LOWPWR,
- S5P_HSMMC_MEM_LOWPWR,
- S5P_CSSYS_MEM_LOWPWR,
- S5P_SECSS_MEM_LOWPWR,
- S5P_PCIE_MEM_LOWPWR,
- S5P_SATA_MEM_LOWPWR,
- S5P_PAD_RETENTION_DRAM_LOWPWR,
- S5P_PAD_RETENTION_MAUDIO_LOWPWR,
- S5P_PAD_RETENTION_GPIO_LOWPWR,
- S5P_PAD_RETENTION_UART_LOWPWR,
- S5P_PAD_RETENTION_MMCA_LOWPWR,
- S5P_PAD_RETENTION_MMCB_LOWPWR,
- S5P_PAD_RETENTION_EBIA_LOWPWR,
- S5P_PAD_RETENTION_EBIB_LOWPWR,
- S5P_PAD_RETENTION_ISOLATION_LOWPWR,
- S5P_PAD_RETENTION_ALV_SEL_LOWPWR,
- S5P_XUSBXTI_LOWPWR,
- S5P_XXTI_LOWPWR,
- S5P_EXT_REGULATOR_LOWPWR,
- S5P_GPIO_MODE_LOWPWR,
- S5P_GPIO_MODE_MAUDIO_LOWPWR,
- S5P_CAM_LOWPWR,
- S5P_TV_LOWPWR,
- S5P_MFC_LOWPWR,
- S5P_G3D_LOWPWR,
- S5P_LCD0_LOWPWR,
- S5P_LCD1_LOWPWR,
- S5P_MAUDIO_LOWPWR,
- S5P_GPS_LOWPWR,
- S5P_GPS_ALIVE_LOWPWR,
-};
-
-static const unsigned int sys_powerdown_val[][NUM_SYS_POWERDOWN] = {
- /* { AFTR, LPA, SLEEP }*/
- { 0, 0, 2 }, /* ARM_CORE0 */
- { 0, 0, 0 }, /* ARM_DIS_IRQ_CORE0 */
- { 0, 0, 0 }, /* ARM_DIS_IRQ_CENTRAL0 */
- { 0, 0, 2 }, /* ARM_CORE1 */
- { 0, 0, 0 }, /* ARM_DIS_IRQ_CORE1 */
- { 0, 0, 0 }, /* ARM_DIS_IRQ_CENTRAL1 */
- { 0, 0, 2 }, /* ARM_COMMON */
- { 2, 2, 3 }, /* ARM_CPU_L2_0 */
- { 2, 2, 3 }, /* ARM_CPU_L2_1 */
- { 1, 0, 0 }, /* CMU_ACLKSTOP */
- { 1, 0, 0 }, /* CMU_SCLKSTOP */
- { 1, 1, 0 }, /* CMU_RESET */
- { 1, 0, 0 }, /* APLL_SYSCLK */
- { 1, 0, 0 }, /* MPLL_SYSCLK */
- { 1, 0, 0 }, /* VPLL_SYSCLK */
- { 1, 1, 0 }, /* EPLL_SYSCLK */
- { 1, 1, 0 }, /* CMU_CLKSTOP_GPS_ALIVE */
- { 1, 1, 0 }, /* CMU_RESET_GPS_ALIVE */
- { 1, 1, 0 }, /* CMU_CLKSTOP_CAM */
- { 1, 1, 0 }, /* CMU_CLKSTOP_TV */
- { 1, 1, 0 }, /* CMU_CLKSTOP_MFC */
- { 1, 1, 0 }, /* CMU_CLKSTOP_G3D */
- { 1, 1, 0 }, /* CMU_CLKSTOP_LCD0 */
- { 1, 1, 0 }, /* CMU_CLKSTOP_LCD1 */
- { 1, 1, 0 }, /* CMU_CLKSTOP_MAUDIO */
- { 1, 1, 0 }, /* CMU_CLKSTOP_GPS */
- { 1, 1, 0 }, /* CMU_RESET_CAM */
- { 1, 1, 0 }, /* CMU_RESET_TV */
- { 1, 1, 0 }, /* CMU_RESET_MFC */
- { 1, 1, 0 }, /* CMU_RESET_G3D */
- { 1, 1, 0 }, /* CMU_RESET_LCD0 */
- { 1, 1, 0 }, /* CMU_RESET_LCD1 */
- { 1, 1, 0 }, /* CMU_RESET_MAUDIO */
- { 1, 1, 0 }, /* CMU_RESET_GPS */
- { 3, 0, 0 }, /* TOP_BUS */
- { 1, 0, 1 }, /* TOP_RETENTION */
- { 3, 0, 3 }, /* TOP_PWR */
- { 1, 1, 0 }, /* LOGIC_RESET */
- { 3, 0, 0 }, /* ONENAND_MEM */
- { 3, 0, 0 }, /* MODIMIF_MEM */
- { 3, 0, 0 }, /* G2D_ACP_MEM */
- { 3, 0, 0 }, /* USBOTG_MEM */
- { 3, 0, 0 }, /* HSMMC_MEM */
- { 3, 0, 0 }, /* CSSYS_MEM */
- { 3, 0, 0 }, /* SECSS_MEM */
- { 3, 0, 0 }, /* PCIE_MEM */
- { 3, 0, 0 }, /* SATA_MEM */
- { 1, 0, 0 }, /* PAD_RETENTION_DRAM */
- { 1, 1, 0 }, /* PAD_RETENTION_MAUDIO */
- { 1, 0, 0 }, /* PAD_RETENTION_GPIO */
- { 1, 0, 0 }, /* PAD_RETENTION_UART */
- { 1, 0, 0 }, /* PAD_RETENTION_MMCA */
- { 1, 0, 0 }, /* PAD_RETENTION_MMCB */
- { 1, 0, 0 }, /* PAD_RETENTION_EBIA */
- { 1, 0, 0 }, /* PAD_RETENTION_EBIB */
- { 1, 0, 0 }, /* PAD_RETENTION_ISOLATION */
- { 1, 0, 0 }, /* PAD_RETENTION_ALV_SEL */
- { 1, 1, 0 }, /* XUSBXTI */
- { 1, 1, 0 }, /* XXTI */
- { 1, 1, 0 }, /* EXT_REGULATOR */
- { 1, 0, 0 }, /* GPIO_MODE */
- { 1, 1, 0 }, /* GPIO_MODE_MAUDIO */
- { 7, 0, 0 }, /* CAM */
- { 7, 0, 0 }, /* TV */
- { 7, 0, 0 }, /* MFC */
- { 7, 0, 0 }, /* G3D */
- { 7, 0, 0 }, /* LCD0 */
- { 7, 0, 0 }, /* LCD1 */
- { 7, 7, 0 }, /* MAUDIO */
- { 7, 0, 0 }, /* GPS */
- { 7, 0, 0 }, /* GPS_ALIVE */
-};
-
-void exynos4_sys_powerdown_conf(enum sys_powerdown mode)
-{
- unsigned int count = ARRAY_SIZE(sys_powerdown_reg);
-
- for (; count > 0; count--)
- __raw_writel(sys_powerdown_val[count - 1][mode],
- sys_powerdown_reg[count - 1]);
-}
+++ /dev/null
-/*
- * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- *
- * Exynos4 camera interface GPIO configuration.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-#include <plat/camport.h>
-
-int exynos4_fimc_setup_gpio(enum s5p_camport_id id)
-{
- u32 gpio8, gpio5;
- u32 sfn;
- int ret;
-
- switch (id) {
- case S5P_CAMPORT_A:
- gpio8 = EXYNOS4_GPJ0(0); /* PCLK, VSYNC, HREF, DATA[0:4] */
- gpio5 = EXYNOS4_GPJ1(0); /* DATA[5:7], CLKOUT, FIELD */
- sfn = S3C_GPIO_SFN(2);
- break;
-
- case S5P_CAMPORT_B:
- gpio8 = EXYNOS4_GPE0(0); /* DATA[0:7] */
- gpio5 = EXYNOS4_GPE1(0); /* PCLK, VSYNC, HREF, CLKOUT, FIELD */
- sfn = S3C_GPIO_SFN(3);
- break;
-
- default:
- WARN(1, "Wrong camport id: %d\n", id);
- return -EINVAL;
- }
-
- ret = s3c_gpio_cfgall_range(gpio8, 8, sfn, S3C_GPIO_PULL_UP);
- if (ret)
- return ret;
-
- return s3c_gpio_cfgall_range(gpio5, 5, sfn, S3C_GPIO_PULL_UP);
-}
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/setup-fimd0.c
- *
- * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Base Exynos4 FIMD 0 configuration
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/fb.h>
-#include <linux/gpio.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/regs-fb-v4.h>
-
-#include <mach/map.h>
-
-void exynos4_fimd0_gpio_setup_24bpp(void)
-{
- unsigned int reg;
-
- s3c_gpio_cfgrange_nopull(EXYNOS4_GPF0(0), 8, S3C_GPIO_SFN(2));
- s3c_gpio_cfgrange_nopull(EXYNOS4_GPF1(0), 8, S3C_GPIO_SFN(2));
- s3c_gpio_cfgrange_nopull(EXYNOS4_GPF2(0), 8, S3C_GPIO_SFN(2));
- s3c_gpio_cfgrange_nopull(EXYNOS4_GPF3(0), 4, S3C_GPIO_SFN(2));
-
- /*
- * Set DISPLAY_CONTROL register for Display path selection.
- *
- * DISPLAY_CONTROL[1:0]
- * ---------------------
- * 00 | MIE
- * 01 | MDINE
- * 10 | FIMD : selected
- * 11 | FIMD
- */
- reg = __raw_readl(S3C_VA_SYS + 0x0210);
- reg |= (1 << 1);
- __raw_writel(reg, S3C_VA_SYS + 0x0210);
-}
+++ /dev/null
-/*
- * linux/arch/arm/mach-exynos4/setup-i2c0.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * I2C0 GPIO configuration.
- *
- * Based on plat-s3c64xx/setup-i2c0.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <plat/iic.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c0_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(EXYNOS4_GPD1(0), 2,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-}
+++ /dev/null
-/*
- * linux/arch/arm/mach-exynos4/setup-i2c1.c
- *
- * Copyright (C) 2010 Samsung Electronics Co., Ltd.
- *
- * I2C1 GPIO configuration.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <plat/iic.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c1_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(EXYNOS4_GPD1(2), 2,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-}
+++ /dev/null
-/*
- * linux/arch/arm/mach-exynos4/setup-i2c2.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *
- * I2C2 GPIO configuration.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <plat/iic.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c2_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(EXYNOS4_GPA0(6), 2,
- S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
-}
+++ /dev/null
-/*
- * linux/arch/arm/mach-exynos4/setup-i2c3.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *
- * I2C3 GPIO configuration.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <plat/iic.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c3_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(EXYNOS4_GPA1(2), 2,
- S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
-}
+++ /dev/null
-/*
- * linux/arch/arm/mach-exynos4/setup-i2c4.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *
- * I2C4 GPIO configuration.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <plat/iic.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c4_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(EXYNOS4_GPB(2), 2,
- S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
-}
+++ /dev/null
-/*
- * linux/arch/arm/mach-exynos4/setup-i2c5.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *
- * I2C5 GPIO configuration.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <plat/iic.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c5_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(EXYNOS4_GPB(6), 2,
- S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
-}
+++ /dev/null
-/*
- * linux/arch/arm/mach-exynos4/setup-i2c6.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *
- * I2C6 GPIO configuration.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <plat/iic.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c6_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(EXYNOS4_GPC1(3), 2,
- S3C_GPIO_SFN(4), S3C_GPIO_PULL_UP);
-}
+++ /dev/null
-/*
- * linux/arch/arm/mach-exynos4/setup-i2c7.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *
- * I2C7 GPIO configuration.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <plat/iic.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c7_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(EXYNOS4_GPD0(2), 2,
- S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
-}
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/setup-keypad.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * GPIO configuration for Exynos4 KeyPad device
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-
-void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
-{
- /* Keypads can be of various combinations, Just making sure */
-
- if (rows > 8) {
- /* Set all the necessary GPX2 pins: KP_ROW[0~7] */
- s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3),
- S3C_GPIO_PULL_UP);
-
- /* Set all the necessary GPX3 pins: KP_ROW[8~] */
- s3c_gpio_cfgall_range(EXYNOS4_GPX3(0), (rows - 8),
- S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
- } else {
- /* Set all the necessary GPX2 pins: KP_ROW[x] */
- s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), rows, S3C_GPIO_SFN(3),
- S3C_GPIO_PULL_UP);
- }
-
- /* Set all the necessary GPX1 pins to special-function 3: KP_COL[x] */
- s3c_gpio_cfgrange_nopull(EXYNOS4_GPX1(0), cols, S3C_GPIO_SFN(3));
-}
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/setup-sdhci-gpio.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/card.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
-
-void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
-{
- struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
- unsigned int gpio;
-
- /* Set all the necessary GPK0[0:1] pins to special-function 2 */
- for (gpio = EXYNOS4_GPK0(0); gpio < EXYNOS4_GPK0(2); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
-
- switch (width) {
- case 8:
- for (gpio = EXYNOS4_GPK1(3); gpio <= EXYNOS4_GPK1(6); gpio++) {
- /* Data pin GPK1[3:6] to special-function 3 */
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
- case 4:
- for (gpio = EXYNOS4_GPK0(3); gpio <= EXYNOS4_GPK0(6); gpio++) {
- /* Data pin GPK0[3:6] to special-function 2 */
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
- default:
- break;
- }
-
- if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
- s3c_gpio_cfgpin(EXYNOS4_GPK0(2), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(EXYNOS4_GPK0(2), S3C_GPIO_PULL_UP);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
-}
-
-void exynos4_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
-{
- struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
- unsigned int gpio;
-
- /* Set all the necessary GPK1[0:1] pins to special-function 2 */
- for (gpio = EXYNOS4_GPK1(0); gpio < EXYNOS4_GPK1(2); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
-
- for (gpio = EXYNOS4_GPK1(3); gpio <= EXYNOS4_GPK1(6); gpio++) {
- /* Data pin GPK1[3:6] to special-function 2 */
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
-
- if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
- s3c_gpio_cfgpin(EXYNOS4_GPK1(2), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(EXYNOS4_GPK1(2), S3C_GPIO_PULL_UP);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
-}
-
-void exynos4_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
-{
- struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
- unsigned int gpio;
-
- /* Set all the necessary GPK2[0:1] pins to special-function 2 */
- for (gpio = EXYNOS4_GPK2(0); gpio < EXYNOS4_GPK2(2); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
-
- switch (width) {
- case 8:
- for (gpio = EXYNOS4_GPK3(3); gpio <= EXYNOS4_GPK3(6); gpio++) {
- /* Data pin GPK3[3:6] to special-function 3 */
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
- case 4:
- for (gpio = EXYNOS4_GPK2(3); gpio <= EXYNOS4_GPK2(6); gpio++) {
- /* Data pin GPK2[3:6] to special-function 2 */
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
- default:
- break;
- }
-
- if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
- s3c_gpio_cfgpin(EXYNOS4_GPK2(2), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(EXYNOS4_GPK2(2), S3C_GPIO_PULL_UP);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
-}
-
-void exynos4_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width)
-{
- struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
- unsigned int gpio;
-
- /* Set all the necessary GPK3[0:1] pins to special-function 2 */
- for (gpio = EXYNOS4_GPK3(0); gpio < EXYNOS4_GPK3(2); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
-
- for (gpio = EXYNOS4_GPK3(3); gpio <= EXYNOS4_GPK3(6); gpio++) {
- /* Data pin GPK3[3:6] to special-function 2 */
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
-
- if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
- s3c_gpio_cfgpin(EXYNOS4_GPK3(2), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(EXYNOS4_GPK3(2), S3C_GPIO_PULL_UP);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
-}
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/setup-sdhci.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - Helper functions for settign up SDHCI device(s) (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-
-/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
-
-char *exynos4_hsmmc_clksrcs[4] = {
- [0] = NULL,
- [1] = NULL,
- [2] = "sclk_mmc", /* mmc_bus */
- [3] = NULL,
-};
-
-void exynos4_setup_sdhci_cfg_card(struct platform_device *dev, void __iomem *r,
- struct mmc_ios *ios, struct mmc_card *card)
-{
- u32 ctrl2, ctrl3;
-
- /* don't need to alter anything according to card-type */
-
- ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
-
- /* select base clock source to HCLK */
-
- ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
-
- /*
- * clear async mode, enable conflict mask, rx feedback ctrl, SD
- * clk hold and no use debounce count
- */
-
- ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
- S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
- S3C_SDHCI_CTRL2_ENFBCLKRX |
- S3C_SDHCI_CTRL2_DFCNT_NONE |
- S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
- /* Tx and Rx feedback clock delay control */
-
- if (ios->clock < 25 * 1000000)
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
- S3C_SDHCI_CTRL3_FCSEL2 |
- S3C_SDHCI_CTRL3_FCSEL1 |
- S3C_SDHCI_CTRL3_FCSEL0);
- else
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
- writel(ctrl2, r + S3C_SDHCI_CONTROL2);
- writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
+++ /dev/null
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <mach/regs-pmu.h>
-#include <mach/regs-usb-phy.h>
-#include <plat/cpu.h>
-#include <plat/usb-phy.h>
-
-static int exynos4_usb_phy1_init(struct platform_device *pdev)
-{
- struct clk *otg_clk;
- struct clk *xusbxti_clk;
- u32 phyclk;
- u32 rstcon;
- int err;
-
- otg_clk = clk_get(&pdev->dev, "otg");
- if (IS_ERR(otg_clk)) {
- dev_err(&pdev->dev, "Failed to get otg clock\n");
- return PTR_ERR(otg_clk);
- }
-
- err = clk_enable(otg_clk);
- if (err) {
- clk_put(otg_clk);
- return err;
- }
-
- writel(readl(S5P_USBHOST_PHY_CONTROL) | S5P_USBHOST_PHY_ENABLE,
- S5P_USBHOST_PHY_CONTROL);
-
- /* set clock frequency for PLL */
- phyclk = readl(EXYNOS4_PHYCLK) & ~CLKSEL_MASK;
-
- xusbxti_clk = clk_get(&pdev->dev, "xusbxti");
- if (xusbxti_clk && !IS_ERR(xusbxti_clk)) {
- switch (clk_get_rate(xusbxti_clk)) {
- case 12 * MHZ:
- phyclk |= CLKSEL_12M;
- break;
- case 24 * MHZ:
- phyclk |= CLKSEL_24M;
- break;
- default:
- case 48 * MHZ:
- /* default reference clock */
- break;
- }
- clk_put(xusbxti_clk);
- }
-
- writel(phyclk, EXYNOS4_PHYCLK);
-
- /* floating prevention logic: disable */
- writel((readl(EXYNOS4_PHY1CON) | FPENABLEN), EXYNOS4_PHY1CON);
-
- /* set to normal HSIC 0 and 1 of PHY1 */
- writel((readl(EXYNOS4_PHYPWR) & ~PHY1_HSIC_NORMAL_MASK),
- EXYNOS4_PHYPWR);
-
- /* set to normal standard USB of PHY1 */
- writel((readl(EXYNOS4_PHYPWR) & ~PHY1_STD_NORMAL_MASK), EXYNOS4_PHYPWR);
-
- /* reset all ports of both PHY and Link */
- rstcon = readl(EXYNOS4_RSTCON) | HOST_LINK_PORT_SWRST_MASK |
- PHY1_SWRST_MASK;
- writel(rstcon, EXYNOS4_RSTCON);
- udelay(10);
-
- rstcon &= ~(HOST_LINK_PORT_SWRST_MASK | PHY1_SWRST_MASK);
- writel(rstcon, EXYNOS4_RSTCON);
- udelay(80);
-
- clk_disable(otg_clk);
- clk_put(otg_clk);
-
- return 0;
-}
-
-static int exynos4_usb_phy1_exit(struct platform_device *pdev)
-{
- struct clk *otg_clk;
- int err;
-
- otg_clk = clk_get(&pdev->dev, "otg");
- if (IS_ERR(otg_clk)) {
- dev_err(&pdev->dev, "Failed to get otg clock\n");
- return PTR_ERR(otg_clk);
- }
-
- err = clk_enable(otg_clk);
- if (err) {
- clk_put(otg_clk);
- return err;
- }
-
- writel((readl(EXYNOS4_PHYPWR) | PHY1_STD_ANALOG_POWERDOWN),
- EXYNOS4_PHYPWR);
-
- writel(readl(S5P_USBHOST_PHY_CONTROL) & ~S5P_USBHOST_PHY_ENABLE,
- S5P_USBHOST_PHY_CONTROL);
-
- clk_disable(otg_clk);
- clk_put(otg_clk);
-
- return 0;
-}
-
-int s5p_usb_phy_init(struct platform_device *pdev, int type)
-{
- if (type == S5P_USB_PHY_HOST)
- return exynos4_usb_phy1_init(pdev);
-
- return -EINVAL;
-}
-
-int s5p_usb_phy_exit(struct platform_device *pdev, int type)
-{
- if (type == S5P_USB_PHY_HOST)
- return exynos4_usb_phy1_exit(pdev);
-
- return -EINVAL;
-}
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/sleep.S
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4210 power Manager (Suspend-To-RAM) support
- * Based on S3C2410 sleep code by:
- * Ben Dooks, (c) 2004 Simtec Electronics
- *
- * Based on PXA/SA1100 sleep code by:
- * Nicolas Pitre, (c) 2002 Monta Vista Software Inc
- * Cliff Brake, (c) 2001
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/memory.h>
-
- .text
-
- /*
- * sleep magic, to allow the bootloader to check for an valid
- * image to resume to. Must be the first word before the
- * s3c_cpu_resume entry.
- */
-
- .word 0x2bedf00d
-
- /*
- * s3c_cpu_resume
- *
- * resume code entry for bootloader to call
- *
- * we must put this code here in the data segment as we have no
- * other way of restoring the stack pointer after sleep, and we
- * must not write to the code segment (code is read-only)
- */
-
-ENTRY(s3c_cpu_resume)
- b cpu_resume
-zreladdr-$(CONFIG_ARCH_MX1) += 0x08008000
-params_phys-$(CONFIG_ARCH_MX1) := 0x08000100
-initrd_phys-$(CONFIG_ARCH_MX1) := 0x08800000
+zreladdr-$(CONFIG_SOC_IMX1) += 0x08008000
+params_phys-$(CONFIG_SOC_IMX1) := 0x08000100
+initrd_phys-$(CONFIG_SOC_IMX1) := 0x08800000
-zreladdr-$(CONFIG_MACH_MX21) += 0xC0008000
-params_phys-$(CONFIG_MACH_MX21) := 0xC0000100
-initrd_phys-$(CONFIG_MACH_MX21) := 0xC0800000
+zreladdr-$(CONFIG_SOC_IMX21) += 0xC0008000
+params_phys-$(CONFIG_SOC_IMX21) := 0xC0000100
+initrd_phys-$(CONFIG_SOC_IMX21) := 0xC0800000
-zreladdr-$(CONFIG_ARCH_MX25) += 0x80008000
-params_phys-$(CONFIG_ARCH_MX25) := 0x80000100
-initrd_phys-$(CONFIG_ARCH_MX25) := 0x80800000
+zreladdr-$(CONFIG_SOC_IMX25) += 0x80008000
+params_phys-$(CONFIG_SOC_IMX25) := 0x80000100
+initrd_phys-$(CONFIG_SOC_IMX25) := 0x80800000
-zreladdr-$(CONFIG_MACH_MX27) += 0xA0008000
-params_phys-$(CONFIG_MACH_MX27) := 0xA0000100
-initrd_phys-$(CONFIG_MACH_MX27) := 0xA0800000
+zreladdr-$(CONFIG_SOC_IMX27) += 0xA0008000
+params_phys-$(CONFIG_SOC_IMX27) := 0xA0000100
+initrd_phys-$(CONFIG_SOC_IMX27) := 0xA0800000
-zreladdr-$(CONFIG_ARCH_MX3) += 0x80008000
-params_phys-$(CONFIG_ARCH_MX3) := 0x80000100
-initrd_phys-$(CONFIG_ARCH_MX3) := 0x80800000
+zreladdr-$(CONFIG_SOC_IMX31) += 0x80008000
+params_phys-$(CONFIG_SOC_IMX31) := 0x80000100
+initrd_phys-$(CONFIG_SOC_IMX31) := 0x80800000
+
+zreladdr-$(CONFIG_SOC_IMX35) += 0x80008000
+params_phys-$(CONFIG_SOC_IMX35) := 0x80000100
+initrd_phys-$(CONFIG_SOC_IMX35) := 0x80800000
zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000
params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100
return -EINVAL;
max_div = ((d->bm_pred >> d->bp_pred) + 1) *
- ((d->bm_pred >> d->bp_pred) + 1);
+ ((d->bm_podf >> d->bp_podf) + 1);
div = parent_rate / rate;
if (div == 0)
clk_set_rate(&asrc_serial_clk, 1500000);
clk_set_rate(&enfc_clk, 11000000);
+ /*
+ * Before pinctrl API is available, we have to rely on the pad
+ * configuration set up by bootloader. For usdhc example here,
+ * u-boot sets up the pads for 49.5 MHz case, and we have to lower
+ * the usdhc clock from 198 to 49.5 MHz to match the pad configuration.
+ *
+ * FIXME: This is should be removed after pinctrl API is available.
+ * At that time, usdhc driver can call pinctrl API to change pad
+ * configuration dynamically per different usdhc clock settings.
+ */
+ clk_set_rate(&usdhc1_clk, 49500000);
+ clk_set_rate(&usdhc2_clk, 49500000);
+ clk_set_rate(&usdhc3_clk, 49500000);
+ clk_set_rate(&usdhc4_clk, 49500000);
+
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
base = of_iomap(np, 0);
WARN_ON(!base);
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
+#include <linux/moduleparam.h>
#include <linux/smsc911x.h>
#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/memory.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/moduleparam.h>
#include <linux/smsc911x.h>
#include <linux/mfd/mc13783.h>
#include <linux/spi/spi.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/moduleparam.h>
#include <linux/leds.h>
#include <linux/memory.h>
#include <linux/mtd/physmap.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/jiffies.h>
+#include <linux/export.h>
#include <asm/irq.h>
#include <mach/hardware.h>
#include <asm/sizes.h>
#include <linux/bitops.h>
#include <linux/serial_8250.h>
#include <linux/mm.h>
+#include <linux/export.h>
#include <asm/types.h>
#include <asm/setup.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/io.h>
+#include <linux/export.h>
#include <asm/dma-mapping.h>
#include <asm/cputype.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/io.h>
+#include <linux/export.h>
#include <mach/udc.h>
#include <mach/hardware.h>
#include <linux/platform_device.h>
#include <linux/cpuidle.h>
#include <linux/io.h>
+#include <linux/export.h>
#include <asm/proc-fns.h>
#include <mach/kirkwood.h>
/* Actual code that puts the SoC in different idle states */
static int kirkwood_enter_idle(struct cpuidle_device *dev,
- struct cpuidle_state *state)
+ struct cpuidle_driver *drv,
+ int index)
{
struct timeval before, after;
int idle_time;
local_irq_disable();
do_gettimeofday(&before);
- if (state == &dev->states[0])
+ if (index == 0)
/* Wait for interrupt state */
cpu_do_idle();
- else if (state == &dev->states[1]) {
+ else if (index == 1) {
/*
* Following write will put DDR in self refresh.
* Note that we have 256 cycles before DDR puts it
local_irq_enable();
idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
(after.tv_usec - before.tv_usec);
- return idle_time;
+
+ /* Update last residency */
+ dev->last_residency = idle_time;
+
+ return index;
}
/* Initialize CPU idle by registering the idle states */
static int kirkwood_init_cpuidle(void)
{
struct cpuidle_device *device;
-
- cpuidle_register_driver(&kirkwood_idle_driver);
+ struct cpuidle_driver *driver = &kirkwood_idle_driver;
device = &per_cpu(kirkwood_cpuidle_device, smp_processor_id());
device->state_count = KIRKWOOD_MAX_STATES;
+ driver->state_count = KIRKWOOD_MAX_STATES;
/* Wait for interrupt state */
- device->states[0].enter = kirkwood_enter_idle;
- device->states[0].exit_latency = 1;
- device->states[0].target_residency = 10000;
- device->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
- strcpy(device->states[0].name, "WFI");
- strcpy(device->states[0].desc, "Wait for interrupt");
+ driver->states[0].enter = kirkwood_enter_idle;
+ driver->states[0].exit_latency = 1;
+ driver->states[0].target_residency = 10000;
+ driver->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
+ strcpy(driver->states[0].name, "WFI");
+ strcpy(driver->states[0].desc, "Wait for interrupt");
/* Wait for interrupt and DDR self refresh state */
- device->states[1].enter = kirkwood_enter_idle;
- device->states[1].exit_latency = 10;
- device->states[1].target_residency = 10000;
- device->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
- strcpy(device->states[1].name, "DDR SR");
- strcpy(device->states[1].desc, "WFI and DDR Self Refresh");
+ driver->states[1].enter = kirkwood_enter_idle;
+ driver->states[1].exit_latency = 10;
+ driver->states[1].target_residency = 10000;
+ driver->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
+ strcpy(driver->states[1].name, "DDR SR");
+ strcpy(driver->states[1].desc, "WFI and DDR Self Refresh");
+ cpuidle_register_driver(&kirkwood_idle_driver);
if (cpuidle_register_device(device)) {
printk(KERN_ERR "kirkwood_init_cpuidle: Failed registering\n");
return -EIO;
# SoC support
obj-$(CONFIG_CPU_PXA168) += pxa168.o irq-pxa168.o
obj-$(CONFIG_CPU_PXA910) += pxa910.o irq-pxa168.o
-obj-$(CONFIG_CPU_MMP2) += mmp2.o irq-mmp2.o
+obj-$(CONFIG_CPU_MMP2) += mmp2.o irq-mmp2.o sram.o
# board support
obj-$(CONFIG_MACH_ASPENITE) += aspenite.o
static struct pxa3xx_nand_platform_data aspenite_nand_info = {
.enable_arbiter = 1,
- .parts = aspenite_nand_partitions,
- .nr_parts = ARRAY_SIZE(aspenite_nand_partitions),
+ .num_cs = 1,
+ .parts[0] = aspenite_nand_partitions,
+ .nr_parts[0] = ARRAY_SIZE(aspenite_nand_partitions),
};
static struct i2c_board_info aspenite_i2c_info[] __initdata = {
| PXA_FLAG_SD_8_BIT_CAPABLE_SLOT,
};
+static struct sram_platdata mmp2_asram_platdata = {
+ .pool_name = "asram",
+ .granularity = SRAM_GRANULARITY,
+};
+
+static struct sram_platdata mmp2_isram_platdata = {
+ .pool_name = "isram",
+ .granularity = SRAM_GRANULARITY,
+};
static void __init brownstone_init(void)
{
mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(brownstone_twsi1_info));
mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
mmp2_add_sdhost(2, &mmp2_sdh_platdata_mmc2); /* eMMC */
+ mmp2_add_asram(&mmp2_asram_platdata);
+ mmp2_add_isram(&mmp2_isram_platdata);
/* enable 5v regulator */
platform_device_register(&brownstone_v_5vp_device);
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <mach/devices.h>
+#include <mach/sram.h>
extern struct pxa_device_desc mmp2_device_uart1;
extern struct pxa_device_desc mmp2_device_uart2;
extern struct pxa_device_desc mmp2_device_sdh1;
extern struct pxa_device_desc mmp2_device_sdh2;
extern struct pxa_device_desc mmp2_device_sdh3;
+extern struct pxa_device_desc mmp2_device_asram;
+extern struct pxa_device_desc mmp2_device_isram;
static inline int mmp2_add_uart(int id)
{
return pxa_register_device(d, data, sizeof(*data));
}
+static inline int mmp2_add_asram(struct sram_platdata *data)
+{
+ return pxa_register_device(&mmp2_device_asram, data, sizeof(*data));
+}
+
+static inline int mmp2_add_isram(struct sram_platdata *data)
+{
+ return pxa_register_device(&mmp2_device_isram, data, sizeof(*data));
+}
+
#endif /* __ASM_MACH_MMP2_H */
--- /dev/null
+/*
+ * linux/arch/arm/mach-mmp/include/mach/sram.h
+ *
+ * SRAM Memory Management
+ *
+ * Copyright (c) 2011 Marvell Semiconductors Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_SRAM_H
+#define __ASM_ARCH_SRAM_H
+
+#include <linux/genalloc.h>
+
+/* ARBITRARY: SRAM allocations are multiples of this 2^N size */
+#define SRAM_GRANULARITY 512
+
+enum sram_type {
+ MMP_SRAM_UNDEFINED = 0,
+ MMP_ASRAM,
+ MMP_ISRAM,
+};
+
+struct sram_platdata {
+ char *pool_name;
+ int granularity;
+};
+
+extern struct gen_pool *sram_get_gpool(char *pool_name);
+
+#endif /* __ASM_ARCH_SRAM_H */
MMP2_DEVICE(sdh1, "sdhci-pxav3", 1, MMC2, 0xd4280800, 0x120);
MMP2_DEVICE(sdh2, "sdhci-pxav3", 2, MMC3, 0xd4281000, 0x120);
MMP2_DEVICE(sdh3, "sdhci-pxav3", 3, MMC4, 0xd4281800, 0x120);
+MMP2_DEVICE(asram, "asram", -1, NONE, 0xe0000000, 0x4000);
+/* 0xd1000000 ~ 0xd101ffff is reserved for secure processor */
+MMP2_DEVICE(isram, "isram", -1, NONE, 0xd1020000, 0x18000);
--- /dev/null
+/*
+ * linux/arch/arm/mach-mmp/sram.c
+ *
+ * based on mach-davinci/sram.c - DaVinci simple SRAM allocator
+ *
+ * Copyright (c) 2011 Marvell Semiconductors Inc.
+ * All Rights Reserved
+ *
+ * Add for mmp sram support - Leo Yan <leoy@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/genalloc.h>
+
+#include <mach/sram.h>
+
+struct sram_bank_info {
+ char *pool_name;
+ struct gen_pool *gpool;
+ int granularity;
+
+ phys_addr_t sram_phys;
+ void __iomem *sram_virt;
+ u32 sram_size;
+
+ struct list_head node;
+};
+
+static DEFINE_MUTEX(sram_lock);
+static LIST_HEAD(sram_bank_list);
+
+struct gen_pool *sram_get_gpool(char *pool_name)
+{
+ struct sram_bank_info *info = NULL;
+
+ if (!pool_name)
+ return NULL;
+
+ mutex_lock(&sram_lock);
+
+ list_for_each_entry(info, &sram_bank_list, node)
+ if (!strcmp(pool_name, info->pool_name))
+ break;
+
+ mutex_unlock(&sram_lock);
+
+ if (&info->node == &sram_bank_list)
+ return NULL;
+
+ return info->gpool;
+}
+EXPORT_SYMBOL(sram_get_gpool);
+
+static int __devinit sram_probe(struct platform_device *pdev)
+{
+ struct sram_platdata *pdata = pdev->dev.platform_data;
+ struct sram_bank_info *info;
+ struct resource *res;
+ int ret = 0;
+
+ if (!pdata && !pdata->pool_name)
+ return -ENODEV;
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "no memory resource defined\n");
+ ret = -ENODEV;
+ goto out;
+ }
+
+ if (!resource_size(res))
+ return 0;
+
+ info->sram_phys = (phys_addr_t)res->start;
+ info->sram_size = resource_size(res);
+ info->sram_virt = ioremap(info->sram_phys, info->sram_size);
+ info->pool_name = kstrdup(pdata->pool_name, GFP_KERNEL);
+ info->granularity = pdata->granularity;
+
+ info->gpool = gen_pool_create(ilog2(info->granularity), -1);
+ if (!info->gpool) {
+ dev_err(&pdev->dev, "create pool failed\n");
+ ret = -ENOMEM;
+ goto create_pool_err;
+ }
+
+ ret = gen_pool_add_virt(info->gpool, (unsigned long)info->sram_virt,
+ info->sram_phys, info->sram_size, -1);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "add new chunk failed\n");
+ ret = -ENOMEM;
+ goto add_chunk_err;
+ }
+
+ mutex_lock(&sram_lock);
+ list_add(&info->node, &sram_bank_list);
+ mutex_unlock(&sram_lock);
+
+ platform_set_drvdata(pdev, info);
+
+ dev_info(&pdev->dev, "initialized\n");
+ return 0;
+
+add_chunk_err:
+ gen_pool_destroy(info->gpool);
+create_pool_err:
+ iounmap(info->sram_virt);
+ kfree(info->pool_name);
+out:
+ kfree(info);
+ return ret;
+}
+
+static int __devexit sram_remove(struct platform_device *pdev)
+{
+ struct sram_bank_info *info;
+
+ info = platform_get_drvdata(pdev);
+ if (info == NULL)
+ return -ENODEV;
+
+ mutex_lock(&sram_lock);
+ list_del(&info->node);
+ mutex_unlock(&sram_lock);
+
+ gen_pool_destroy(info->gpool);
+ iounmap(info->sram_virt);
+ kfree(info->pool_name);
+ kfree(info);
+ return 0;
+}
+
+static const struct platform_device_id sram_id_table[] = {
+ { "asram", MMP_ASRAM },
+ { "isram", MMP_ISRAM },
+ { }
+};
+
+static struct platform_driver sram_driver = {
+ .probe = sram_probe,
+ .remove = sram_remove,
+ .driver = {
+ .name = "mmp-sram",
+ },
+ .id_table = sram_id_table,
+};
+
+static int __init sram_init(void)
+{
+ return platform_driver_register(&sram_driver);
+}
+core_initcall(sram_init);
+
+MODULE_LICENSE("GPL");
obj-$(CONFIG_MSM_SMD) += last_radio_log.o
obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o
+CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
+
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_SMP) += headsmp.o platsmp.o
extern struct sys_timer msm_timer;
-static void __init msm7x30_fixup(struct machine_desc *desc, struct tag *tag,
- char **cmdline, struct meminfo *mi)
+static void __init msm7x30_fixup(struct tag *tag, char **cmdline,
+ struct meminfo *mi)
{
for (; tag->hdr.size; tag = tag_next(tag))
if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) {
#include "devices.h"
-static void __init msm8960_fixup(struct machine_desc *desc, struct tag *tag,
- char **cmdline, struct meminfo *mi)
+static void __init msm8960_fixup(struct tag *tag, char **cmdline,
+ struct meminfo *mi)
{
for (; tag->hdr.size; tag = tag_next(tag))
if (tag->hdr.tag == ATAG_MEM &&
#include <mach/board.h>
#include <mach/msm_iomap.h>
-static void __init msm8x60_fixup(struct machine_desc *desc, struct tag *tag,
- char **cmdline, struct meminfo *mi)
+static void __init msm8x60_fixup(struct tag *tag, char **cmdline,
+ struct meminfo *mi)
{
for (; tag->hdr.size; tag = tag_next(tag))
if (tag->hdr.tag == ATAG_MEM &&
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/export.h>
#include <mach/hardware.h>
#include <asm/page.h>
__asmeq("%1", "r0")
__asmeq("%2", "r1")
__asmeq("%3", "r2")
+#ifdef REQUIRES_SEC
+ ".arch_extension sec\n"
+#endif
"smc #0 @ switch to secure world\n"
: "=r" (r0)
: "r" (r0), "r" (r1), "r" (r2)
NULL, NULL, &ipg_clk, &gpt_ipg_clk);
DEFINE_CLOCK(pwm1_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG6_OFFSET,
- NULL, NULL, &ipg_clk, NULL);
+ NULL, NULL, &ipg_perclk, NULL);
DEFINE_CLOCK(pwm2_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG8_OFFSET,
- NULL, NULL, &ipg_clk, NULL);
+ NULL, NULL, &ipg_perclk, NULL);
/* I2C */
DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET,
return 0;
}
+#ifdef CONFIG_OF
static void __init clk_get_freq_dt(unsigned long *ckil, unsigned long *osc,
unsigned long *ckih1, unsigned long *ckih2)
{
clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
return mx53_clocks_init(ckil, osc, ckih1, ckih2);
}
+#endif
"mmc0-slot-power");
if (ret)
pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret);
- mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
+ else
+ mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
ret = gpio_request_one(MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW,
"mmc1-slot-power");
else
mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
- mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
mx28_add_rtc_stmp3xxx();
gpio_led_register_device(0, &mx28evk_led_data);
#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/io.h>
+#include <linux/export.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
+#include <linux/export.h>
#include <media/soc_camera.h>
#include <plat/irda.h>
#include <plat/keypad.h>
#include <plat/common.h>
-#include <plat/omap-alsa.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/types.h>
#include <linux/i2c.h>
#include <linux/errno.h>
+#include <linux/export.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
#include <linux/smc91x.h>
+#include <linux/export.h>
#include <mach/hardware.h>
#include <mach/system.h>
* for more details.
*/
+#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
return;
}
-#ifdef CONFIG_OMAP_MPU_TIMER
+#if defined(CONFIG_OMAP_MPU_TIMER) && !defined(CONFIG_OMAP_DM_TIMER)
#warning Enable 32kHz OS timer in order to allow sleep states in idle
use_idlect1 = use_idlect1 & ~(1 << 9);
#else
{
int ret;
- omap_mux_init_gpio(29, OMAP_PIN_INPUT);
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc);
* XXX: Still needed to boot until the i2c & twl driver is adapted to
* device-tree
*/
+#ifdef CONFIG_ARCH_OMAP4
static struct twl4030_platform_data sdp4430_twldata = {
.irq_base = TWL6030_IRQ_BASE,
.irq_end = TWL6030_IRQ_END,
{
omap4_pmic_init("twl6030", &sdp4430_twldata);
}
+#endif
+#ifdef CONFIG_ARCH_OMAP3
static struct twl4030_platform_data beagle_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
{
omap3_pmic_init("twl4030", &beagle_twldata);
}
+#endif
static struct of_device_id omap_dt_match_table[] __initdata = {
{ .compatible = "simple-bus", },
of_platform_populate(NULL, omap_dt_match_table, NULL, NULL);
}
+#ifdef CONFIG_ARCH_OMAP4
static void __init omap4_init(void)
{
omap4_i2c_init();
omap_generic_init();
}
+#endif
+#ifdef CONFIG_ARCH_OMAP3
static void __init omap3_init(void)
{
omap3_i2c_init();
omap_generic_init();
}
+#endif
#if defined(CONFIG_SOC_OMAP2420)
static const char *omap242x_boards_compat[] __initdata = {
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/input/matrix_keypad.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <plat/usb.h>
#include <plat/board.h>
#include <plat/common.h>
-#include <plat/keypad.h>
#include <plat/menelaus.h>
#include <plat/dma.h>
#include <plat/gpmc.h>
#define H4_ETHR_GPIO_IRQ 92
-static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 };
-static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 };
-
-static const unsigned int h4_keymap[] = {
+#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
+static const uint32_t board_matrix_keys[] = {
KEY(0, 0, KEY_LEFT),
KEY(1, 0, KEY_RIGHT),
KEY(2, 0, KEY_A),
KEY(4, 5, KEY_ENTER),
};
+static const struct matrix_keymap_data board_keymap_data = {
+ .keymap = board_matrix_keys,
+ .keymap_size = ARRAY_SIZE(board_matrix_keys),
+};
+
+static unsigned int board_keypad_row_gpios[] = {
+ 88, 89, 124, 11, 6, 96
+};
+
+static unsigned int board_keypad_col_gpios[] = {
+ 90, 91, 100, 36, 12, 97, 98
+};
+
+static struct matrix_keypad_platform_data board_keypad_platform_data = {
+ .keymap_data = &board_keymap_data,
+ .row_gpios = board_keypad_row_gpios,
+ .num_row_gpios = ARRAY_SIZE(board_keypad_row_gpios),
+ .col_gpios = board_keypad_col_gpios,
+ .num_col_gpios = ARRAY_SIZE(board_keypad_col_gpios),
+ .active_low = 1,
+
+ .debounce_ms = 20,
+ .col_scan_delay_us = 5,
+};
+
+static struct platform_device board_keyboard = {
+ .name = "matrix-keypad",
+ .id = -1,
+ .dev = {
+ .platform_data = &board_keypad_platform_data,
+ },
+};
+static void __init board_mkp_init(void)
+{
+ omap_mux_init_gpio(88, OMAP_PULL_ENA | OMAP_PULL_UP);
+ omap_mux_init_gpio(89, OMAP_PULL_ENA | OMAP_PULL_UP);
+ omap_mux_init_gpio(124, OMAP_PULL_ENA | OMAP_PULL_UP);
+ omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP);
+ if (omap_has_menelaus()) {
+ omap_mux_init_signal("sdrc_a14.gpio0",
+ OMAP_PULL_ENA | OMAP_PULL_UP);
+ omap_mux_init_signal("vlynq_rx0.gpio_15", 0);
+ omap_mux_init_signal("gpio_98", 0);
+ board_keypad_row_gpios[5] = 0;
+ board_keypad_col_gpios[2] = 15;
+ board_keypad_col_gpios[6] = 18;
+ } else {
+ omap_mux_init_signal("gpio_96", OMAP_PULL_ENA | OMAP_PULL_UP);
+ omap_mux_init_signal("gpio_100", 0);
+ omap_mux_init_signal("gpio_98", 0);
+ }
+ omap_mux_init_signal("gpio_90", 0);
+ omap_mux_init_signal("gpio_91", 0);
+ omap_mux_init_signal("gpio_36", 0);
+ omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0);
+ omap_mux_init_signal("gpio_97", 0);
+
+ platform_device_register(&board_keyboard);
+}
+#else
+static inline void board_mkp_init(void)
+{
+}
+#endif
+
static struct mtd_partition h4_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
{
.resource = &h4_flash_resource,
};
-static const struct matrix_keymap_data h4_keymap_data = {
- .keymap = h4_keymap,
- .keymap_size = ARRAY_SIZE(h4_keymap),
-};
-
-static struct omap_kp_platform_data h4_kp_data = {
- .rows = 6,
- .cols = 7,
- .keymap_data = &h4_keymap_data,
- .rep = true,
- .row_gpios = row_gpios,
- .col_gpios = col_gpios,
-};
-
-static struct platform_device h4_kp_device = {
- .name = "omap-keypad",
- .id = -1,
- .dev = {
- .platform_data = &h4_kp_data,
- },
-};
-
static struct platform_device *h4_devices[] __initdata = {
&h4_flash_device,
- &h4_kp_device,
};
static struct panel_generic_dpi_data h4_panel_data = {
* if not needed.
*/
-#if defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE)
- omap_mux_init_gpio(88, OMAP_PULL_ENA | OMAP_PULL_UP);
- omap_mux_init_gpio(89, OMAP_PULL_ENA | OMAP_PULL_UP);
- omap_mux_init_gpio(124, OMAP_PULL_ENA | OMAP_PULL_UP);
- omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP);
- if (omap_has_menelaus()) {
- omap_mux_init_signal("sdrc_a14.gpio0",
- OMAP_PULL_ENA | OMAP_PULL_UP);
- omap_mux_init_signal("vlynq_rx0.gpio_15", 0);
- omap_mux_init_signal("gpio_98", 0);
- row_gpios[5] = 0;
- col_gpios[2] = 15;
- col_gpios[6] = 18;
- } else {
- omap_mux_init_signal("gpio_96", OMAP_PULL_ENA | OMAP_PULL_UP);
- omap_mux_init_signal("gpio_100", 0);
- omap_mux_init_signal("gpio_98", 0);
- }
- omap_mux_init_signal("gpio_90", 0);
- omap_mux_init_signal("gpio_91", 0);
- omap_mux_init_signal("gpio_36", 0);
- omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0);
- omap_mux_init_signal("gpio_97", 0);
-#endif
-
+ board_mkp_init();
i2c_register_board_info(1, h4_i2c_board_info,
ARRAY_SIZE(h4_i2c_board_info));
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/mmc/host.h>
+#include <linux/export.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
(DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
-#define DPLL_FINT_BAND1_MIN 750000
-#define DPLL_FINT_BAND1_MAX 2100000
-#define DPLL_FINT_BAND2_MIN 7500000
-#define DPLL_FINT_BAND2_MAX 21000000
+#define OMAP3430_DPLL_FINT_BAND1_MIN 750000
+#define OMAP3430_DPLL_FINT_BAND1_MAX 2100000
+#define OMAP3430_DPLL_FINT_BAND2_MIN 7500000
+#define OMAP3430_DPLL_FINT_BAND2_MAX 21000000
+
+/*
+ * DPLL valid Fint frequency range for OMAP36xx and OMAP4xxx.
+ * From device data manual section 4.3 "DPLL and DLL Specifications".
+ */
+#define OMAP3PLUS_DPLL_FINT_JTYPE_MIN 500000
+#define OMAP3PLUS_DPLL_FINT_JTYPE_MAX 2500000
+#define OMAP3PLUS_DPLL_FINT_MIN 32000
+#define OMAP3PLUS_DPLL_FINT_MAX 52000000
/* _dpll_test_fint() return codes */
#define DPLL_FINT_UNDERFLOW -1
static int _dpll_test_fint(struct clk *clk, u8 n)
{
struct dpll_data *dd;
- long fint;
+ long fint, fint_min, fint_max;
int ret = 0;
dd = clk->dpll_data;
/* DPLL divider must result in a valid jitter correction val */
fint = clk->parent->rate / n;
- if (fint < DPLL_FINT_BAND1_MIN) {
+ if (cpu_is_omap24xx()) {
+ /* Should not be called for OMAP2, so warn if it is called */
+ WARN(1, "No fint limits available for OMAP2!\n");
+ return DPLL_FINT_INVALID;
+ } else if (cpu_is_omap3430()) {
+ fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
+ fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
+ } else if (dd->flags & DPLL_J_TYPE) {
+ fint_min = OMAP3PLUS_DPLL_FINT_JTYPE_MIN;
+ fint_max = OMAP3PLUS_DPLL_FINT_JTYPE_MAX;
+ } else {
+ fint_min = OMAP3PLUS_DPLL_FINT_MIN;
+ fint_max = OMAP3PLUS_DPLL_FINT_MAX;
+ }
+
+ if (fint < fint_min) {
pr_debug("rejecting n=%d due to Fint failure, "
"lowering max_divider\n", n);
dd->max_divider = n;
ret = DPLL_FINT_UNDERFLOW;
-
- } else if (fint > DPLL_FINT_BAND1_MAX &&
- fint < DPLL_FINT_BAND2_MIN) {
-
- pr_debug("rejecting n=%d due to Fint failure\n", n);
- ret = DPLL_FINT_INVALID;
-
- } else if (fint > DPLL_FINT_BAND2_MAX) {
-
+ } else if (fint > fint_max) {
pr_debug("rejecting n=%d due to Fint failure, "
"boosting min_divider\n", n);
dd->min_divider = n;
ret = DPLL_FINT_INVALID;
-
+ } else if (cpu_is_omap3430() && fint > OMAP3430_DPLL_FINT_BAND1_MAX &&
+ fint < OMAP3430_DPLL_FINT_BAND2_MIN) {
+ pr_debug("rejecting n=%d due to Fint failure\n", n);
+ ret = DPLL_FINT_INVALID;
}
return ret;
int omap4_dpllmx_gatectrl_read(struct clk *clk);
void omap4_dpllmx_allow_gatectrl(struct clk *clk);
void omap4_dpllmx_deny_gatectrl(struct clk *clk);
+long omap4_dpll_regm4xen_round_rate(struct clk *clk, unsigned long target_rate);
+unsigned long omap4_dpll_regm4xen_recalc(struct clk *clk);
#ifdef CONFIG_OMAP_RESET_CLOCKS
void omap2_clk_disable_unused(struct clk *clk);
CLK(NULL, "pka_ick", &pka_ick, CK_242X),
CLK(NULL, "usb_fck", &usb_fck, CK_242X),
CLK("musb-hdrc", "fck", &osc_ck, CK_242X),
- CLK("omap_timer.1", "fck", &gpt1_fck, CK_242X),
- CLK("omap_timer.2", "fck", &gpt2_fck, CK_242X),
- CLK("omap_timer.3", "fck", &gpt3_fck, CK_242X),
- CLK("omap_timer.4", "fck", &gpt4_fck, CK_242X),
- CLK("omap_timer.5", "fck", &gpt5_fck, CK_242X),
- CLK("omap_timer.6", "fck", &gpt6_fck, CK_242X),
- CLK("omap_timer.7", "fck", &gpt7_fck, CK_242X),
- CLK("omap_timer.8", "fck", &gpt8_fck, CK_242X),
- CLK("omap_timer.9", "fck", &gpt9_fck, CK_242X),
- CLK("omap_timer.10", "fck", &gpt10_fck, CK_242X),
- CLK("omap_timer.11", "fck", &gpt11_fck, CK_242X),
- CLK("omap_timer.12", "fck", &gpt12_fck, CK_242X),
CLK("omap_timer.1", "32k_ck", &func_32k_ck, CK_243X),
CLK("omap_timer.2", "32k_ck", &func_32k_ck, CK_243X),
CLK("omap_timer.3", "32k_ck", &func_32k_ck, CK_243X),
CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X),
CLK("omap_hsmmc.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X),
CLK("omap_hsmmc.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X),
- CLK("omap_timer.1", "fck", &gpt1_fck, CK_243X),
- CLK("omap_timer.2", "fck", &gpt2_fck, CK_243X),
- CLK("omap_timer.3", "fck", &gpt3_fck, CK_243X),
- CLK("omap_timer.4", "fck", &gpt4_fck, CK_243X),
- CLK("omap_timer.5", "fck", &gpt5_fck, CK_243X),
- CLK("omap_timer.6", "fck", &gpt6_fck, CK_243X),
- CLK("omap_timer.7", "fck", &gpt7_fck, CK_243X),
- CLK("omap_timer.8", "fck", &gpt8_fck, CK_243X),
- CLK("omap_timer.9", "fck", &gpt9_fck, CK_243X),
- CLK("omap_timer.10", "fck", &gpt10_fck, CK_243X),
- CLK("omap_timer.11", "fck", &gpt11_fck, CK_243X),
- CLK("omap_timer.12", "fck", &gpt12_fck, CK_243X),
CLK("omap_timer.1", "32k_ck", &func_32k_ck, CK_243X),
CLK("omap_timer.2", "32k_ck", &func_32k_ck, CK_243X),
CLK("omap_timer.3", "32k_ck", &func_32k_ck, CK_243X),
CLK("musb-am35x", "fck", &hsotgusb_fck_am35xx, CK_AM35XX),
CLK(NULL, "hecc_ck", &hecc_ck, CK_AM35XX),
CLK(NULL, "uart4_ick", &uart4_ick_am35xx, CK_AM35XX),
- CLK("omap_timer.1", "fck", &gpt1_fck, CK_3XXX),
- CLK("omap_timer.2", "fck", &gpt2_fck, CK_3XXX),
- CLK("omap_timer.3", "fck", &gpt3_fck, CK_3XXX),
- CLK("omap_timer.4", "fck", &gpt4_fck, CK_3XXX),
- CLK("omap_timer.5", "fck", &gpt5_fck, CK_3XXX),
- CLK("omap_timer.6", "fck", &gpt6_fck, CK_3XXX),
- CLK("omap_timer.7", "fck", &gpt7_fck, CK_3XXX),
- CLK("omap_timer.8", "fck", &gpt8_fck, CK_3XXX),
- CLK("omap_timer.9", "fck", &gpt9_fck, CK_3XXX),
- CLK("omap_timer.10", "fck", &gpt10_fck, CK_3XXX),
- CLK("omap_timer.11", "fck", &gpt11_fck, CK_3XXX),
- CLK("omap_timer.12", "fck", &gpt12_fck, CK_3XXX),
CLK("omap_timer.1", "32k_ck", &omap_32k_fck, CK_3XXX),
CLK("omap_timer.2", "32k_ck", &omap_32k_fck, CK_3XXX),
CLK("omap_timer.3", "32k_ck", &omap_32k_fck, CK_3XXX),
#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
#define __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
+/*
+ * OMAP4430_REGM4XEN_MULT: If the CM_CLKMODE_DPLL_ABE.DPLL_REGM4XEN bit is
+ * set, then the DPLL's lock frequency is multiplied by 4 (OMAP4430 TRM
+ * vV Section 3.6.3.3.1 "DPLLs Output Clocks Parameters")
+ */
+#define OMAP4430_REGM4XEN_MULT 4
+
int omap4xxx_clk_init(void);
#endif
.dpll_data = &dpll_abe_dd,
.init = &omap2_init_dpll_parent,
.ops = &clkops_omap3_noncore_dpll_ops,
- .recalc = &omap3_dpll_recalc,
- .round_rate = &omap2_dpll_round_rate,
+ .recalc = &omap4_dpll_regm4xen_recalc,
+ .round_rate = &omap4_dpll_regm4xen_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
};
.recalc = &omap2_clksel_recalc,
};
+static const struct clksel_rate div2_2to1_rates[] = {
+ { .div = 1, .val = 1, .flags = RATE_IN_4430 },
+ { .div = 2, .val = 0, .flags = RATE_IN_4430 },
+ { .div = 0 },
+};
+
+static const struct clksel ocp_abe_iclk_div[] = {
+ { .parent = &aess_fclk, .rates = div2_2to1_rates },
+ { .parent = NULL },
+};
+
static struct clk ocp_abe_iclk = {
.name = "ocp_abe_iclk",
.parent = &aess_fclk,
+ .clksel = ocp_abe_iclk_div,
+ .clksel_reg = OMAP4430_CM1_ABE_AESS_CLKCTRL,
+ .clksel_mask = OMAP4430_CLKSEL_AESS_FCLK_MASK,
.ops = &clkops_null,
- .recalc = &followparent_recalc,
+ .recalc = &omap2_clksel_recalc,
};
static struct clk per_abe_24m_fclk = {
};
static const struct clksel_rate div3_8to32_rates[] = {
- { .div = 8, .val = 0, .flags = RATE_IN_44XX },
- { .div = 16, .val = 1, .flags = RATE_IN_44XX },
- { .div = 32, .val = 2, .flags = RATE_IN_44XX },
+ { .div = 8, .val = 0, .flags = RATE_IN_4460 },
+ { .div = 16, .val = 1, .flags = RATE_IN_4460 },
+ { .div = 32, .val = 2, .flags = RATE_IN_4460 },
{ .div = 0 },
};
CLK("usbhs-omap.0", "usbhost_ick", &dummy_ck, CK_443X),
CLK("usbhs-omap.0", "usbtll_fck", &dummy_ck, CK_443X),
CLK("omap_wdt", "ick", &dummy_ck, CK_443X),
- CLK("omap_timer.1", "fck", &timer1_fck, CK_443X),
- CLK("omap_timer.2", "fck", &timer2_fck, CK_443X),
- CLK("omap_timer.3", "fck", &timer3_fck, CK_443X),
- CLK("omap_timer.4", "fck", &timer4_fck, CK_443X),
- CLK("omap_timer.5", "fck", &timer5_fck, CK_443X),
- CLK("omap_timer.6", "fck", &timer6_fck, CK_443X),
- CLK("omap_timer.7", "fck", &timer7_fck, CK_443X),
- CLK("omap_timer.8", "fck", &timer8_fck, CK_443X),
- CLK("omap_timer.9", "fck", &timer9_fck, CK_443X),
- CLK("omap_timer.10", "fck", &timer10_fck, CK_443X),
- CLK("omap_timer.11", "fck", &timer11_fck, CK_443X),
CLK("omap_timer.1", "32k_ck", &sys_32k_ck, CK_443X),
CLK("omap_timer.2", "32k_ck", &sys_32k_ck, CK_443X),
CLK("omap_timer.3", "32k_ck", &sys_32k_ck, CK_443X),
struct omap_clk *c;
u32 cpu_clkflg;
- if (cpu_is_omap44xx()) {
+ if (cpu_is_omap443x()) {
cpu_mask = RATE_IN_4430;
cpu_clkflg = CK_443X;
} else if (cpu_is_omap446x()) {
- cpu_mask = RATE_IN_4460;
- cpu_clkflg = CK_446X;
+ cpu_mask = RATE_IN_4460 | RATE_IN_4430;
+ cpu_clkflg = CK_446X | CK_443X;
} else {
return 0;
}
#include <linux/device.h>
#include <linux/list.h>
#include <linux/errno.h>
+#include <linux/string.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/limits.h>
/**
* omap3_enter_idle - Programs OMAP3 to enter the specified state
* @dev: cpuidle device
- * @state: The target state to be programmed
+ * @drv: cpuidle driver
+ * @index: the index of state to be entered
*
* Called from the CPUidle framework to program the device to the
* specified target state selected by the governor.
*/
static int omap3_enter_idle(struct cpuidle_device *dev,
- struct cpuidle_state *state)
+ struct cpuidle_driver *drv,
+ int index)
{
- struct omap3_idle_statedata *cx = cpuidle_get_statedata(state);
+ struct omap3_idle_statedata *cx =
+ cpuidle_get_statedata(&dev->states_usage[index]);
struct timespec ts_preidle, ts_postidle, ts_idle;
u32 mpu_state = cx->mpu_state, core_state = cx->core_state;
+ int idle_time;
/* Used to keep track of the total time in idle */
getnstimeofday(&ts_preidle);
goto return_sleep_time;
/* Deny idle for C1 */
- if (state == &dev->states[0]) {
+ if (index == 0) {
pwrdm_for_each_clkdm(mpu_pd, _cpuidle_deny_idle);
pwrdm_for_each_clkdm(core_pd, _cpuidle_deny_idle);
}
omap_sram_idle();
/* Re-allow idle for C1 */
- if (state == &dev->states[0]) {
+ if (index == 0) {
pwrdm_for_each_clkdm(mpu_pd, _cpuidle_allow_idle);
pwrdm_for_each_clkdm(core_pd, _cpuidle_allow_idle);
}
local_irq_enable();
local_fiq_enable();
- return ts_idle.tv_nsec / NSEC_PER_USEC + ts_idle.tv_sec * USEC_PER_SEC;
+ idle_time = ts_idle.tv_nsec / NSEC_PER_USEC + ts_idle.tv_sec * \
+ USEC_PER_SEC;
+
+ /* Update cpuidle counters */
+ dev->last_residency = idle_time;
+
+ return index;
}
/**
* next_valid_state - Find next valid C-state
* @dev: cpuidle device
- * @state: Currently selected C-state
+ * @drv: cpuidle driver
+ * @index: Index of currently selected c-state
*
- * If the current state is valid, it is returned back to the caller.
- * Else, this function searches for a lower c-state which is still
- * valid.
+ * If the state corresponding to index is valid, index is returned back
+ * to the caller. Else, this function searches for a lower c-state which is
+ * still valid (as defined in omap3_power_states[]) and returns its index.
*
* A state is valid if the 'valid' field is enabled and
* if it satisfies the enable_off_mode condition.
*/
-static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev,
- struct cpuidle_state *curr)
+static int next_valid_state(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv,
+ int index)
{
- struct cpuidle_state *next = NULL;
- struct omap3_idle_statedata *cx = cpuidle_get_statedata(curr);
+ struct cpuidle_state_usage *curr_usage = &dev->states_usage[index];
+ struct cpuidle_state *curr = &drv->states[index];
+ struct omap3_idle_statedata *cx = cpuidle_get_statedata(curr_usage);
u32 mpu_deepest_state = PWRDM_POWER_RET;
u32 core_deepest_state = PWRDM_POWER_RET;
+ int next_index = -1;
if (enable_off_mode) {
mpu_deepest_state = PWRDM_POWER_OFF;
if ((cx->valid) &&
(cx->mpu_state >= mpu_deepest_state) &&
(cx->core_state >= core_deepest_state)) {
- return curr;
+ return index;
} else {
int idx = OMAP3_NUM_STATES - 1;
/* Reach the current state starting at highest C-state */
for (; idx >= 0; idx--) {
- if (&dev->states[idx] == curr) {
- next = &dev->states[idx];
+ if (&drv->states[idx] == curr) {
+ next_index = idx;
break;
}
}
/* Should never hit this condition */
- WARN_ON(next == NULL);
+ WARN_ON(next_index == -1);
/*
* Drop to next valid state.
*/
idx--;
for (; idx >= 0; idx--) {
- cx = cpuidle_get_statedata(&dev->states[idx]);
+ cx = cpuidle_get_statedata(&dev->states_usage[idx]);
if ((cx->valid) &&
(cx->mpu_state >= mpu_deepest_state) &&
(cx->core_state >= core_deepest_state)) {
- next = &dev->states[idx];
+ next_index = idx;
break;
}
}
/*
* C1 is always valid.
- * So, no need to check for 'next==NULL' outside this loop.
+ * So, no need to check for 'next_index == -1' outside
+ * this loop.
*/
}
- return next;
+ return next_index;
}
/**
* omap3_enter_idle_bm - Checks for any bus activity
* @dev: cpuidle device
- * @state: The target state to be programmed
+ * @drv: cpuidle driver
+ * @index: array index of target state to be programmed
*
* This function checks for any pending activity and then programs
* the device to the specified or a safer state.
*/
static int omap3_enter_idle_bm(struct cpuidle_device *dev,
- struct cpuidle_state *state)
+ struct cpuidle_driver *drv,
+ int index)
{
- struct cpuidle_state *new_state;
+ int new_state_idx;
u32 core_next_state, per_next_state = 0, per_saved_state = 0, cam_state;
struct omap3_idle_statedata *cx;
int ret;
if (!omap3_can_sleep()) {
- new_state = dev->safe_state;
+ new_state_idx = drv->safe_state_index;
goto select_state;
}
*/
cam_state = pwrdm_read_pwrst(cam_pd);
if (cam_state == PWRDM_POWER_ON) {
- new_state = dev->safe_state;
+ new_state_idx = drv->safe_state_index;
goto select_state;
}
* Prevent PER off if CORE is not in retention or off as this
* would disable PER wakeups completely.
*/
- cx = cpuidle_get_statedata(state);
+ cx = cpuidle_get_statedata(&dev->states_usage[index]);
core_next_state = cx->core_state;
per_next_state = per_saved_state = pwrdm_read_next_pwrst(per_pd);
if ((per_next_state == PWRDM_POWER_OFF) &&
if (per_next_state != per_saved_state)
pwrdm_set_next_pwrst(per_pd, per_next_state);
- new_state = next_valid_state(dev, state);
+ new_state_idx = next_valid_state(dev, drv, index);
select_state:
- dev->last_state = new_state;
- ret = omap3_enter_idle(dev, new_state);
+ ret = omap3_enter_idle(dev, drv, new_state_idx);
/* Restore original PER state if it was modified */
if (per_next_state != per_saved_state)
.owner = THIS_MODULE,
};
-/* Helper to fill the C-state common data and register the driver_data */
-static inline struct omap3_idle_statedata *_fill_cstate(
- struct cpuidle_device *dev,
+/* Helper to fill the C-state common data*/
+static inline void _fill_cstate(struct cpuidle_driver *drv,
int idx, const char *descr)
{
- struct omap3_idle_statedata *cx = &omap3_idle_data[idx];
- struct cpuidle_state *state = &dev->states[idx];
+ struct cpuidle_state *state = &drv->states[idx];
state->exit_latency = cpuidle_params_table[idx].exit_latency;
state->target_residency = cpuidle_params_table[idx].target_residency;
state->flags = CPUIDLE_FLAG_TIME_VALID;
state->enter = omap3_enter_idle_bm;
- cx->valid = cpuidle_params_table[idx].valid;
sprintf(state->name, "C%d", idx + 1);
strncpy(state->desc, descr, CPUIDLE_DESC_LEN);
- cpuidle_set_statedata(state, cx);
+
+}
+
+/* Helper to register the driver_data */
+static inline struct omap3_idle_statedata *_fill_cstate_usage(
+ struct cpuidle_device *dev,
+ int idx)
+{
+ struct omap3_idle_statedata *cx = &omap3_idle_data[idx];
+ struct cpuidle_state_usage *state_usage = &dev->states_usage[idx];
+
+ cx->valid = cpuidle_params_table[idx].valid;
+ cpuidle_set_statedata(state_usage, cx);
return cx;
}
int __init omap3_idle_init(void)
{
struct cpuidle_device *dev;
+ struct cpuidle_driver *drv = &omap3_idle_driver;
struct omap3_idle_statedata *cx;
mpu_pd = pwrdm_lookup("mpu_pwrdm");
per_pd = pwrdm_lookup("per_pwrdm");
cam_pd = pwrdm_lookup("cam_pwrdm");
- cpuidle_register_driver(&omap3_idle_driver);
+
+ drv->safe_state_index = -1;
dev = &per_cpu(omap3_idle_dev, smp_processor_id());
/* C1 . MPU WFI + Core active */
- cx = _fill_cstate(dev, 0, "MPU ON + CORE ON");
- (&dev->states[0])->enter = omap3_enter_idle;
- dev->safe_state = &dev->states[0];
+ _fill_cstate(drv, 0, "MPU ON + CORE ON");
+ (&drv->states[0])->enter = omap3_enter_idle;
+ drv->safe_state_index = 0;
+ cx = _fill_cstate_usage(dev, 0);
cx->valid = 1; /* C1 is always valid */
cx->mpu_state = PWRDM_POWER_ON;
cx->core_state = PWRDM_POWER_ON;
/* C2 . MPU WFI + Core inactive */
- cx = _fill_cstate(dev, 1, "MPU ON + CORE ON");
+ _fill_cstate(drv, 1, "MPU ON + CORE ON");
+ cx = _fill_cstate_usage(dev, 1);
cx->mpu_state = PWRDM_POWER_ON;
cx->core_state = PWRDM_POWER_ON;
/* C3 . MPU CSWR + Core inactive */
- cx = _fill_cstate(dev, 2, "MPU RET + CORE ON");
+ _fill_cstate(drv, 2, "MPU RET + CORE ON");
+ cx = _fill_cstate_usage(dev, 2);
cx->mpu_state = PWRDM_POWER_RET;
cx->core_state = PWRDM_POWER_ON;
/* C4 . MPU OFF + Core inactive */
- cx = _fill_cstate(dev, 3, "MPU OFF + CORE ON");
+ _fill_cstate(drv, 3, "MPU OFF + CORE ON");
+ cx = _fill_cstate_usage(dev, 3);
cx->mpu_state = PWRDM_POWER_OFF;
cx->core_state = PWRDM_POWER_ON;
/* C5 . MPU RET + Core RET */
- cx = _fill_cstate(dev, 4, "MPU RET + CORE RET");
+ _fill_cstate(drv, 4, "MPU RET + CORE RET");
+ cx = _fill_cstate_usage(dev, 4);
cx->mpu_state = PWRDM_POWER_RET;
cx->core_state = PWRDM_POWER_RET;
/* C6 . MPU OFF + Core RET */
- cx = _fill_cstate(dev, 5, "MPU OFF + CORE RET");
+ _fill_cstate(drv, 5, "MPU OFF + CORE RET");
+ cx = _fill_cstate_usage(dev, 5);
cx->mpu_state = PWRDM_POWER_OFF;
cx->core_state = PWRDM_POWER_RET;
/* C7 . MPU OFF + Core OFF */
- cx = _fill_cstate(dev, 6, "MPU OFF + CORE OFF");
+ _fill_cstate(drv, 6, "MPU OFF + CORE OFF");
+ cx = _fill_cstate_usage(dev, 6);
/*
* Erratum i583: implementation for ES rev < Es1.2 on 3630. We cannot
* enable OFF mode in a stable form for previous revisions.
cx->mpu_state = PWRDM_POWER_OFF;
cx->core_state = PWRDM_POWER_OFF;
+ drv->state_count = OMAP3_NUM_STATES;
+ cpuidle_register_driver(&omap3_idle_driver);
+
dev->state_count = OMAP3_NUM_STATES;
if (cpuidle_register_device(dev)) {
printk(KERN_ERR "%s: CPUidle register device failed\n",
#if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \
defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE)
-static struct omap_device_pm_latency omap_mcpdm_latency[] = {
- {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static void omap_init_mcpdm(void)
{
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
oh = omap_hwmod_lookup("mcpdm");
if (!oh) {
return;
}
- od = omap_device_build("omap-mcpdm", -1, oh, NULL, 0,
- omap_mcpdm_latency,
- ARRAY_SIZE(omap_mcpdm_latency), 0);
- if (IS_ERR(od))
- printk(KERN_ERR "Could not build omap_device for omap-mcpdm-dai\n");
+ pdev = omap_device_build("omap-mcpdm", -1, oh, NULL, 0, NULL, 0, 0);
+ WARN(IS_ERR(pdev), "Can't build omap_device for omap-mcpdm.\n");
}
#else
static inline void omap_init_mcpdm(void) {}
* GNU General Public License for more details.
*/
+#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
* propagating?
*/
if (!r)
- clk->rate = omap2_get_dpll_rate(clk);
+ clk->rate = (clk->recalc) ? clk->recalc(clk) :
+ omap2_get_dpll_rate(clk);
return r;
}
int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
{
struct clk *new_parent = NULL;
+ unsigned long hw_rate;
u16 freqsel = 0;
struct dpll_data *dd;
int ret;
if (!dd)
return -EINVAL;
- if (rate == omap2_get_dpll_rate(clk))
+ hw_rate = (clk->recalc) ? clk->recalc(clk) : omap2_get_dpll_rate(clk);
+ if (rate == hw_rate)
return 0;
/*
new_parent = dd->clk_bypass;
} else {
if (dd->last_rounded_rate != rate)
- omap2_dpll_round_rate(clk, rate);
+ rate = clk->round_rate(clk, rate);
if (dd->last_rounded_rate == 0)
return -EINVAL;
#include <plat/clock.h>
#include "clock.h"
+#include "clock44xx.h"
#include "cm-regbits-44xx.h"
/* Supported only on OMAP4 */
.deny_idle = omap4_dpllmx_deny_gatectrl,
};
+/**
+ * omap4_dpll_regm4xen_recalc - compute DPLL rate, considering REGM4XEN bit
+ * @clk: struct clk * of the DPLL to compute the rate for
+ *
+ * Compute the output rate for the OMAP4 DPLL represented by @clk.
+ * Takes the REGM4XEN bit into consideration, which is needed for the
+ * OMAP4 ABE DPLL. Returns the DPLL's output rate (before M-dividers)
+ * upon success, or 0 upon error.
+ */
+unsigned long omap4_dpll_regm4xen_recalc(struct clk *clk)
+{
+ u32 v;
+ unsigned long rate;
+ struct dpll_data *dd;
+
+ if (!clk || !clk->dpll_data)
+ return 0;
+
+ dd = clk->dpll_data;
+
+ rate = omap2_get_dpll_rate(clk);
+
+ /* regm4xen adds a multiplier of 4 to DPLL calculations */
+ v = __raw_readl(dd->control_reg);
+ if (v & OMAP4430_DPLL_REGM4XEN_MASK)
+ rate *= OMAP4430_REGM4XEN_MULT;
+
+ return rate;
+}
+
+/**
+ * omap4_dpll_regm4xen_round_rate - round DPLL rate, considering REGM4XEN bit
+ * @clk: struct clk * of the DPLL to round a rate for
+ * @target_rate: the desired rate of the DPLL
+ *
+ * Compute the rate that would be programmed into the DPLL hardware
+ * for @clk if set_rate() were to be provided with the rate
+ * @target_rate. Takes the REGM4XEN bit into consideration, which is
+ * needed for the OMAP4 ABE DPLL. Returns the rounded rate (before
+ * M-dividers) upon success, -EINVAL if @clk is null or not a DPLL, or
+ * ~0 if an error occurred in omap2_dpll_round_rate().
+ */
+long omap4_dpll_regm4xen_round_rate(struct clk *clk, unsigned long target_rate)
+{
+ u32 v;
+ struct dpll_data *dd;
+ long r;
+
+ if (!clk || !clk->dpll_data)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+
+ /* regm4xen adds a multiplier of 4 to DPLL calculations */
+ v = __raw_readl(dd->control_reg) & OMAP4430_DPLL_REGM4XEN_MASK;
+
+ if (v)
+ target_rate = target_rate / OMAP4430_REGM4XEN_MULT;
+
+ r = omap2_dpll_round_rate(clk, target_rate);
+ if (r == ~0)
+ return r;
+
+ if (v)
+ clk->dpll_data->last_rounded_rate *= OMAP4430_REGM4XEN_MULT;
+
+ return clk->dpll_data->last_rounded_rate;
+}
* of the OMAP PM core code.
*/
+#include <linux/module.h>
#include <linux/platform_device.h>
#include "cm2xxx_3xxx.h"
#include "prm2xxx_3xxx.h"
* published by the Free Software Foundation.
*/
+#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/mtd/onenand_regs.h>
* Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
* card with Vcc regulator (from twl4030 or whatever). OMAP has both
* 1.8V and 3.0V modes, controlled by the PBIAS register.
- *
- * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
- * is most naturally TWL VSIM; those pins also use PBIAS.
- *
- * FIXME handle VMMC1A as needed ...
*/
reg = omap4_ctrl_pad_readl(control_pbias_offset);
reg &= ~(OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK |
- OMAP4_MMC1_PWRDNZ_MASK);
+ OMAP4_MMC1_PWRDNZ_MASK |
+ OMAP4_MMC1_PBIASLITE_VMODE_MASK);
omap4_ctrl_pad_writel(reg, control_pbias_offset);
}
reg &= ~(OMAP4_MMC1_PWRDNZ_MASK);
omap4_ctrl_pad_writel(reg, control_pbias_offset);
}
- } else {
- reg = omap4_ctrl_pad_readl(control_pbias_offset);
- reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK |
- OMAP4_MMC1_PWRDNZ_MASK |
- OMAP4_MMC1_PBIASLITE_VMODE_MASK);
- omap4_ctrl_pad_writel(reg, control_pbias_offset);
}
}
OMAP4_SDMMC1_PUSTRENGTH_GRP1_MASK);
reg &= ~(OMAP4_SDMMC1_PUSTRENGTH_GRP2_MASK |
OMAP4_SDMMC1_PUSTRENGTH_GRP3_MASK);
- reg |= (OMAP4_USBC1_DR0_SPEEDCTRL_MASK|
+ reg |= (OMAP4_SDMMC1_DR0_SPEEDCTRL_MASK |
OMAP4_SDMMC1_DR1_SPEEDCTRL_MASK |
OMAP4_SDMMC1_DR2_SPEEDCTRL_MASK);
omap4_ctrl_pad_writel(reg, control_mmc1);
OMAP3_CHECK_FEATURE(status, ISP);
if (cpu_is_omap3630())
omap_features |= OMAP3_HAS_192MHZ_CLK;
- if (!cpu_is_omap3505() && !cpu_is_omap3517())
+ if (cpu_is_omap3430() || cpu_is_omap3630())
omap_features |= OMAP3_HAS_IO_WAKEUP;
+ if (cpu_is_omap3630() || omap_rev() == OMAP3430_REV_ES3_1 ||
+ omap_rev() == OMAP3430_REV_ES3_1_2)
+ omap_features |= OMAP3_HAS_IO_CHAIN_CTRL;
omap_features |= OMAP3_HAS_SDRC;
#define OMAP4_DSI2_LANEENABLE_MASK (0x7 << 29)
#define OMAP4_DSI1_LANEENABLE_SHIFT 24
#define OMAP4_DSI1_LANEENABLE_MASK (0x1f << 24)
-#define OMAP4_DSI1_PIPD_SHIFT 19
-#define OMAP4_DSI1_PIPD_MASK (0x1f << 19)
-#define OMAP4_DSI2_PIPD_SHIFT 14
-#define OMAP4_DSI2_PIPD_MASK (0x1f << 14)
+#define OMAP4_DSI2_PIPD_SHIFT 19
+#define OMAP4_DSI2_PIPD_MASK (0x1f << 19)
+#define OMAP4_DSI1_PIPD_SHIFT 14
+#define OMAP4_DSI1_PIPD_MASK (0x1f << 14)
/* CONTROL_MCBSPLP */
#define OMAP4_ALBCTRLRX_FSX_SHIFT 31
omap_pm_if_early_init();
}
+#ifdef CONFIG_ARCH_OMAP2
void __init omap2420_init_early(void)
{
omap2_set_globals_242x();
omap_hwmod_init_postsetup();
omap2430_clk_init();
}
+#endif
/*
* Currently only board-omap3beagle.c should call this because of the
* same machine_id for 34xx and 36xx beagle.. Will get fixed with DT.
*/
+#ifdef CONFIG_ARCH_OMAP3
void __init omap3_init_early(void)
{
omap2_set_globals_3xxx();
omap_hwmod_init_postsetup();
omap3xxx_clk_init();
}
+#endif
+#ifdef CONFIG_ARCH_OMAP4
void __init omap4430_init_early(void)
{
omap2_set_globals_443x();
omap_hwmod_init_postsetup();
omap4xxx_clk_init();
}
+#endif
void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1)
* for more details.
*/
+#include <linux/module.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/platform_device.h>
* published by the Free Software Foundation.
*/
+#include <linux/module.h>
#include <linux/platform_device.h>
#include <plat/iommu.h>
* Returns the context loss count of the powerdomain assocated with @oh
* upon success, or zero if no powerdomain exists for @oh.
*/
-u32 omap_hwmod_get_context_loss_count(struct omap_hwmod *oh)
+int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh)
{
struct powerdomain *pwrdm;
int ret = 0;
&omap3xxx_mmc2_hwmod,
&omap3xxx_mmc3_hwmod,
&omap3xxx_mpu_hwmod,
- &omap3xxx_iva_hwmod,
&omap3xxx_timer1_hwmod,
&omap3xxx_timer2_hwmod,
&omap3xxx_i2c1_hwmod,
&omap3xxx_i2c2_hwmod,
&omap3xxx_i2c3_hwmod,
- &omap34xx_sr1_hwmod,
- &omap34xx_sr2_hwmod,
/* gpio class */
&omap3xxx_gpio1_hwmod,
&omap3xxx_mcbsp2_sidetone_hwmod,
&omap3xxx_mcbsp3_sidetone_hwmod,
- /* mailbox class */
- &omap3xxx_mailbox_hwmod,
/* mcspi class */
&omap34xx_mcspi1,
/* 3430ES1-only hwmods */
static __initdata struct omap_hwmod *omap3430es1_hwmods[] = {
+ &omap3xxx_iva_hwmod,
&omap3430es1_dss_core_hwmod,
+ &omap3xxx_mailbox_hwmod,
NULL
};
/* 3430ES2+-only hwmods */
static __initdata struct omap_hwmod *omap3430es2plus_hwmods[] = {
+ &omap3xxx_iva_hwmod,
&omap3xxx_dss_core_hwmod,
&omap3xxx_usbhsotg_hwmod,
+ &omap3xxx_mailbox_hwmod,
NULL
};
/* 34xx-only hwmods (all ES revisions) */
static __initdata struct omap_hwmod *omap34xx_hwmods[] = {
+ &omap3xxx_iva_hwmod,
&omap34xx_sr1_hwmod,
&omap34xx_sr2_hwmod,
+ &omap3xxx_mailbox_hwmod,
NULL
};
/* 36xx-only hwmods (all ES revisions) */
static __initdata struct omap_hwmod *omap36xx_hwmods[] = {
+ &omap3xxx_iva_hwmod,
&omap3xxx_uart4_hwmod,
&omap3xxx_dss_core_hwmod,
&omap36xx_sr1_hwmod,
&omap36xx_sr2_hwmod,
&omap3xxx_usbhsotg_hwmod,
+ &omap3xxx_mailbox_hwmod,
NULL
};
/* Register hwmods common to all OMAP3 */
r = omap_hwmod_register(omap3xxx_hwmods);
- if (!r)
+ if (r < 0)
return r;
rev = omap_rev();
};
r = omap_hwmod_register(h);
- if (!r)
+ if (r < 0)
return r;
/*
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
* USA
*/
+#include <linux/module.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/err.h>
#include <linux/opp.h>
+#include <linux/export.h>
#include <plat/omap-pm.h>
#include <plat/omap_device.h>
{
int timeout = 0;
- if (omap_rev() >= OMAP3430_REV_ES3_1) {
- omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
- PM_WKEN);
- /* Do a readback to assure write has been done */
- omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN);
-
- while (!(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN) &
- OMAP3430_ST_IO_CHAIN_MASK)) {
- timeout++;
- if (timeout > 1000) {
- printk(KERN_ERR "Wake up daisy chain "
- "activation failed.\n");
- return;
- }
- omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK,
- WKUP_MOD, PM_WKEN);
+ omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+ PM_WKEN);
+ /* Do a readback to assure write has been done */
+ omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN);
+
+ while (!(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN) &
+ OMAP3430_ST_IO_CHAIN_MASK)) {
+ timeout++;
+ if (timeout > 1000) {
+ pr_err("Wake up daisy chain activation failed.\n");
+ return;
}
+ omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK,
+ WKUP_MOD, PM_WKEN);
}
}
static void omap3_disable_io_chain(void)
{
- if (omap_rev() >= OMAP3430_REV_ES3_1)
- omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
- PM_WKEN);
+ omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+ PM_WKEN);
}
static void omap3_core_save_context(void)
printk(KERN_ERR "Invalid mpu state in sram_idle\n");
return;
}
- pwrdm_pre_transition();
/* NEON control */
if (pwrdm_read_pwrst(neon_pwrdm) == PWRDM_POWER_ON)
(per_next_state < PWRDM_POWER_ON ||
core_next_state < PWRDM_POWER_ON)) {
omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN);
- omap3_enable_io_chain();
+ if (omap3_has_io_chain_ctrl())
+ omap3_enable_io_chain();
}
/* Block console output in case it is on one of the OMAP UARTs */
if (!console_trylock())
goto console_still_active;
+ pwrdm_pre_transition();
+
/* PER */
if (per_next_state < PWRDM_POWER_ON) {
per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
omap3_intc_prepare_idle();
/*
- * On EMU/HS devices ROM code restores a SRDC value
- * from scratchpad which has automatic self refresh on timeout
- * of AUTO_CNT = 1 enabled. This takes care of erratum ID i443.
- * Hence store/restore the SDRC_POWER register here.
- */
- if (omap_rev() >= OMAP3430_REV_ES3_0 &&
- omap_type() != OMAP2_DEVICE_TYPE_GP &&
+ * On EMU/HS devices ROM code restores a SRDC value
+ * from scratchpad which has automatic self refresh on timeout
+ * of AUTO_CNT = 1 enabled. This takes care of erratum ID i443.
+ * Hence store/restore the SDRC_POWER register here.
+ */
+ if (cpu_is_omap3430() && omap_rev() >= OMAP3430_REV_ES3_0 &&
+ (omap_type() == OMAP2_DEVICE_TYPE_EMU ||
+ omap_type() == OMAP2_DEVICE_TYPE_SEC) &&
core_next_state == PWRDM_POWER_OFF)
sdrc_pwr = sdrc_read_reg(SDRC_POWER);
omap34xx_do_sram_idle(save_state);
/* Restore normal SDRC POWER settings */
- if (omap_rev() >= OMAP3430_REV_ES3_0 &&
- omap_type() != OMAP2_DEVICE_TYPE_GP &&
+ if (cpu_is_omap3430() && omap_rev() >= OMAP3430_REV_ES3_0 &&
+ (omap_type() == OMAP2_DEVICE_TYPE_EMU ||
+ omap_type() == OMAP2_DEVICE_TYPE_SEC) &&
core_next_state == PWRDM_POWER_OFF)
sdrc_write_reg(sdrc_pwr, SDRC_POWER);
}
omap3_intc_resume_idle();
+ pwrdm_post_transition();
+
/* PER */
if (per_next_state < PWRDM_POWER_ON) {
per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm);
core_next_state < PWRDM_POWER_ON)) {
omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
PM_WKEN);
- omap3_disable_io_chain();
+ if (omap3_has_io_chain_ctrl())
+ omap3_disable_io_chain();
}
- pwrdm_post_transition();
-
clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]);
}
if (!cpu_is_omap34xx())
return -ENODEV;
+ if (!omap3_has_io_chain_ctrl())
+ pr_warning("PM: no software I/O chain control; some wakeups may be lost\n");
+
pm_errata_configure();
/* XXX prcm_setup_regs needs to be before enabling hw
* @pwrdm: struct powerdomain * to wait for
*
* Context loss count is the sum of powerdomain off-mode counter, the
- * logic off counter and the per-bank memory off counter. Returns 0
+ * logic off counter and the per-bank memory off counter. Returns negative
* (and WARNs) upon error, otherwise, returns the context loss count.
*/
-u32 pwrdm_get_context_loss_count(struct powerdomain *pwrdm)
+int pwrdm_get_context_loss_count(struct powerdomain *pwrdm)
{
int i, count;
if (!pwrdm) {
WARN(1, "powerdomain: %s: pwrdm is null\n", __func__);
- return 0;
+ return -ENODEV;
}
count = pwrdm->state_counter[PWRDM_POWER_OFF];
for (i = 0; i < pwrdm->banks; i++)
count += pwrdm->ret_mem_off_counter[i];
- pr_debug("powerdomain: %s: context loss count = %u\n",
+ /*
+ * Context loss count has to be a non-negative value. Clear the sign
+ * bit to get a value range from 0 to INT_MAX.
+ */
+ count &= INT_MAX;
+
+ pr_debug("powerdomain: %s: context loss count = %d\n",
pwrdm->name, count);
return count;
int pwrdm_pre_transition(void);
int pwrdm_post_transition(void);
int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm);
-u32 pwrdm_get_context_loss_count(struct powerdomain *pwrdm);
+int pwrdm_get_context_loss_count(struct powerdomain *pwrdm);
bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm);
extern void omap242x_powerdomains_init(void);
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/delay.h>
+#include <linux/export.h>
#include <mach/system.h>
#include <plat/common.h>
* published by the Free Software Foundation.
*/
+#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/clk.h>
#include <linux/io.h>
return ret;
}
-struct omap_device_pm_latency omap2_dmtimer_latency[] = {
- {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
/**
* omap_timer_init - build and register timer device with an
* associated timer hwmod
pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
#endif
pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata),
- omap2_dmtimer_latency,
- ARRAY_SIZE(omap2_dmtimer_latency),
- 0);
+ NULL, 0, 0);
if (IS_ERR(pdev)) {
pr_err("%s: Can't build omap_device for %s: %s.\n",
static u64 musb_dmamask = DMA_BIT_MASK(32);
-static void usb_musb_mux_init(struct omap_musb_board_data *board_data)
-{
- switch (board_data->interface_type) {
- case MUSB_INTERFACE_UTMI:
- omap_mux_init_signal("usba0_otg_dp", OMAP_PIN_INPUT);
- omap_mux_init_signal("usba0_otg_dm", OMAP_PIN_INPUT);
- break;
- case MUSB_INTERFACE_ULPI:
- omap_mux_init_signal("usba0_ulpiphy_clk",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usba0_ulpiphy_stp",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usba0_ulpiphy_dir",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usba0_ulpiphy_nxt",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usba0_ulpiphy_dat0",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usba0_ulpiphy_dat1",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usba0_ulpiphy_dat2",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usba0_ulpiphy_dat3",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usba0_ulpiphy_dat4",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usba0_ulpiphy_dat5",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usba0_ulpiphy_dat6",
- OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_signal("usba0_ulpiphy_dat7",
- OMAP_PIN_INPUT_PULLDOWN);
- break;
- default:
- break;
- }
-}
-
static struct omap_musb_board_data musb_default_board_data = {
.interface_type = MUSB_INTERFACE_ULPI,
.mode = MUSB_OTG,
* published by the Free Software Foundation.
*/
+#include <linux/string.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/export.h>
#include <linux/usb/musb.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/err.h>
+#include <linux/export.h>
#include <linux/debugfs.h>
#include <linux/slab.h>
#include <linux/clk.h>
.partitions = ts78xx_ts_nand_parts,
.nr_partitions = ARRAY_SIZE(ts78xx_ts_nand_parts),
.chip_delay = 15,
- .options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
},
.ctrl = {
/*
#define UART_SHIFT 2
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rv, =PHYS_TO_IO(PICOXCELL_UART1_BASE)
ldr \rp, =PICOXCELL_UART1_BASE
.endm
static struct pxa3xx_nand_platform_data cm_x300_nand_info = {
.enable_arbiter = 1,
.keep_config = 1,
- .parts = cm_x300_nand_partitions,
- .nr_parts = ARRAY_SIZE(cm_x300_nand_partitions),
+ .num_cs = 1,
+ .parts[0] = cm_x300_nand_partitions,
+ .nr_parts[0] = ARRAY_SIZE(cm_x300_nand_partitions),
};
static void __init cm_x300_init_nand(void)
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
static struct pxa3xx_nand_platform_data colibri_nand_info = {
.enable_arbiter = 1,
.keep_config = 1,
- .parts = colibri_nand_partitions,
- .nr_parts = ARRAY_SIZE(colibri_nand_partitions),
+ .num_cs = 1,
+ .parts[0] = colibri_nand_partitions,
+ .nr_parts[0] = ARRAY_SIZE(colibri_nand_partitions),
};
void __init colibri_pxa3xx_init_nand(void)
#include <linux/spi/pxa2xx_spi.h>
#include <linux/mtd/sharpsl.h>
#include <linux/input/matrix_keypad.h>
+#include <linux/module.h>
#include <video/w100fb.h>
#include <asm/setup.h>
INIT_CLKREG(&tmio_dummy_clk, NULL, "CLK_CK32K"),
};
-void eseries_register_clks(void)
+static void __init eseries_register_clks(void)
{
clkdev_add_table(eseries_clkregs, ARRAY_SIZE(eseries_clkregs));
}
extern void eseries_get_tmio_gpios(void);
extern struct resource eseries_tmio_resources[];
extern struct platform_device e300_tc6387xb_device;
-extern void eseries_register_clks(void);
#define GPIO_REGS_VIRT io_p2v(0x40E00000)
#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x) (GPIO_REGS_VIRT + (x))
+#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
/* GPIO Pin Level Registers */
#define GPLR0 GPIO_REG(BANK_OFF(0) + 0x00)
static struct pxa3xx_nand_platform_data littleton_nand_info = {
.enable_arbiter = 1,
- .parts = littleton_nand_partitions,
- .nr_parts = ARRAY_SIZE(littleton_nand_partitions),
+ .num_cs = 1,
+ .parts[0] = littleton_nand_partitions,
+ .nr_parts[0] = ARRAY_SIZE(littleton_nand_partitions),
};
static void __init littleton_init_nand(void)
};
static struct pxa3xx_nand_platform_data mxm_8x10_nand_info = {
- .enable_arbiter = 1,
- .keep_config = 1,
- .parts = mxm_8x10_nand_partitions,
- .nr_parts = ARRAY_SIZE(mxm_8x10_nand_partitions)
+ .enable_arbiter = 1,
+ .keep_config = 1,
+ .num_cs = 1,
+ .parts[0] = mxm_8x10_nand_partitions,
+ .nr_parts[0] = ARRAY_SIZE(mxm_8x10_nand_partitions)
};
static void __init mxm_8x10_nand_init(void)
*/
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/fb.h>
#include <linux/pm.h>
static struct pxa3xx_nand_platform_data raumfeld_nand_info = {
.enable_arbiter = 1,
.keep_config = 1,
- .parts = raumfeld_nand_partitions,
- .nr_parts = ARRAY_SIZE(raumfeld_nand_partitions),
+ .num_cs = 1,
+ .parts[0] = raumfeld_nand_partitions,
+ .nr_parts[0] = ARRAY_SIZE(raumfeld_nand_partitions),
};
/**
#include <linux/input/matrix_keypad.h>
#include <linux/regulator/machine.h>
#include <linux/io.h>
+#include <linux/module.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
+#include <linux/export.h>
#include <linux/sched.h>
#include <linux/bitops.h>
#include <linux/fb.h>
static struct pxa3xx_nand_platform_data zylonite_nand_info = {
.enable_arbiter = 1,
- .parts = zylonite_nand_partitions,
- .nr_parts = ARRAY_SIZE(zylonite_nand_partitions),
+ .num_cs = 1,
+ .parts[0] = zylonite_nand_partitions,
+ .nr_parts[0] = ARRAY_SIZE(zylonite_nand_partitions),
};
static void __init zylonite_init_nand(void)
bool
depends on ARCH_S3C2410
select CPU_ARM920T
- select S3C_GPIO_PULL_UP
select S3C2410_CLOCK
select CPU_LLSERIAL_S3C2410
select S3C2410_PM if PM
-/* arch/arm/mach-s3c2410/include/mach/fb.h
- *
- * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- * Inspired by pxafb.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARM_FB_H
-#define __ASM_ARM_FB_H
-
-#include <mach/regs-lcd.h>
-
-struct s3c2410fb_hw {
- unsigned long lcdcon1;
- unsigned long lcdcon2;
- unsigned long lcdcon3;
- unsigned long lcdcon4;
- unsigned long lcdcon5;
-};
-
-/* LCD description */
-struct s3c2410fb_display {
- /* LCD type */
- unsigned type;
-
- /* Screen size */
- unsigned short width;
- unsigned short height;
-
- /* Screen info */
- unsigned short xres;
- unsigned short yres;
- unsigned short bpp;
-
- unsigned pixclock; /* pixclock in picoseconds */
- unsigned short left_margin; /* value in pixels (TFT) or HCLKs (STN) */
- unsigned short right_margin; /* value in pixels (TFT) or HCLKs (STN) */
- unsigned short hsync_len; /* value in pixels (TFT) or HCLKs (STN) */
- unsigned short upper_margin; /* value in lines (TFT) or 0 (STN) */
- unsigned short lower_margin; /* value in lines (TFT) or 0 (STN) */
- unsigned short vsync_len; /* value in lines (TFT) or 0 (STN) */
-
- /* lcd configuration registers */
- unsigned long lcdcon5;
-};
-
-struct s3c2410fb_mach_info {
-
- struct s3c2410fb_display *displays; /* attached diplays info */
- unsigned num_displays; /* number of defined displays */
- unsigned default_display;
-
- /* GPIOs */
-
- unsigned long gpcup;
- unsigned long gpcup_mask;
- unsigned long gpccon;
- unsigned long gpccon_mask;
- unsigned long gpdup;
- unsigned long gpdup_mask;
- unsigned long gpdcon;
- unsigned long gpdcon_mask;
-
- /* lpc3600 control register */
- unsigned long lpcsel;
-};
-
-extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *);
-
-#endif /* __ASM_ARM_FB_H */
+#include <plat/fb-s3c2410.h>
-/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
- *
- * Copyright (c) 2003-2009 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - hardware
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __MACH_GPIO_FNS_H
-#define __MACH_GPIO_FNS_H __FILE__
-
-/* These functions are in the to-be-removed category and it is strongly
- * encouraged not to use these in new code. They will be marked deprecated
- * very soon.
- *
- * Most of the functionality can be either replaced by the gpiocfg calls
- * for the s3c platform or by the generic GPIOlib API.
- *
- * As of 2.6.35-rc, these will be removed, with the few drivers using them
- * either replaced or given a wrapper until the calls can be removed.
-*/
-
-#include <plat/gpio-cfg.h>
-
-static inline void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int cfg)
-{
- /* 1:1 mapping between cfgpin and setcfg calls at the moment */
- s3c_gpio_cfgpin(pin, cfg);
-}
-
-/* external functions for GPIO support
- *
- * These allow various different clients to access the same GPIO
- * registers without conflicting. If your driver only owns the entire
- * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
-*/
-
-extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
-
-/* s3c2410_gpio_getirq
- *
- * turn the given pin number into the corresponding IRQ number
- *
- * returns:
- * < 0 = no interrupt for this pin
- * >=0 = interrupt number for the pin
-*/
-
-extern int s3c2410_gpio_getirq(unsigned int pin);
-
-/* s3c2410_gpio_irqfilter
- *
- * set the irq filtering on the given pin
- *
- * on = 0 => disable filtering
- * 1 => enable filtering
- *
- * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
- * width of filter (0 through 63)
- *
- *
-*/
-
-extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
- unsigned int config);
-
-/* s3c2410_gpio_pullup
- *
- * This call should be replaced with s3c_gpio_setpull().
- *
- * As a note, there is currently no distinction between pull-up and pull-down
- * in the s3c24xx series devices with only an on/off configuration.
- */
-
-/* s3c2410_gpio_pullup
- *
- * configure the pull-up control on the given pin
- *
- * to = 1 => disable the pull-up
- * 0 => enable the pull-up
- *
- * eg;
- *
- * s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
- * s3c2410_gpio_pullup(S3C2410_GPE(8), 0);
-*/
-
-extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
-
-extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
-
-extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
-
-#endif /* __MACH_GPIO_FNS_H */
+#include <plat/gpio-fns.h>
#define S3C2410_GPIO_M_NR (32) /* technically 2. */
#if CONFIG_S3C_GPIO_SPACE != 0
-#error CONFIG_S3C_GPIO_SPACE cannot be zero at the moment
+#error CONFIG_S3C_GPIO_SPACE cannot be nonzero at the moment
#endif
#define S3C2410_GPIO_NEXT(__gpio) \
#include <mach/regs-gpio.h>
-extern struct s3c_gpio_chip s3c24xx_gpios[];
+extern struct samsung_gpio_chip s3c24xx_gpios[];
-static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin)
+static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int pin)
{
- struct s3c_gpio_chip *chip;
+ struct samsung_gpio_chip *chip;
if (pin > S3C_GPIO_END)
return NULL;
#define IRQ_LCD_SYSTEM IRQ_S3C2443_LCD2
#ifdef CONFIG_CPU_S3C2440
-#define IRQ_S3C244x_AC97 IRQ_S3C2440_AC97
+#define IRQ_S3C244X_AC97 IRQ_S3C2440_AC97
#else
-#define IRQ_S3C244x_AC97 IRQ_S3C2443_AC97
+#define IRQ_S3C244X_AC97 IRQ_S3C2443_AC97
#endif
/* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
#define S3C24XX_PA_RTC S3C2410_PA_RTC
#define S3C24XX_PA_ADC S3C2410_PA_ADC
#define S3C24XX_PA_SPI S3C2410_PA_SPI
+#define S3C24XX_PA_SPI1 (S3C2410_PA_SPI + S3C2410_SPI1)
#define S3C24XX_PA_SDI S3C2410_PA_SDI
#define S3C24XX_PA_NAND S3C2410_PA_NAND
}
static inline void s3c_pm_restored_gpios(void) { }
-static inline void s3c_pm_saved_gpios(void) { }
+static inline void samsung_pm_saved_gpios(void) { }
#define S3C2443_CLKDIV0_PREDIV_MASK (3<<4)
#define S3C2443_CLKDIV0_PREDIV_SHIFT (4)
+#define S3C2416_CLKDIV0_ARMDIV_MASK (7 << 9)
#define S3C2443_CLKDIV0_ARMDIV_MASK (15<<9)
#define S3C2443_CLKDIV0_ARMDIV_SHIFT (9)
#define S3C2443_CLKDIV0_ARMDIV_1 (0<<9)
#define S3C2443_PCLKCON_UART3 (1<<3)
#define S3C2443_PCLKCON_IIC (1<<4)
#define S3C2443_PCLKCON_SDI (1<<5)
+#define S3C2443_PCLKCON_HSSPI (1<<6)
#define S3C2443_PCLKCON_ADC (1<<7)
#define S3C2443_PCLKCON_AC97 (1<<8)
#define S3C2443_PCLKCON_IIS (1<<9)
#include <video/platform_lcd.h>
#include <linux/mmc/host.h>
+#include <linux/export.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
S3C2410_MISCCR_USBSUSPND0 |
S3C2410_MISCCR_USBSUSPND1, 0x0);
- tmp = (0x78 << S3C24XX_PLLCON_MDIVSHIFT)
- | (0x02 << S3C24XX_PLLCON_PDIVSHIFT)
- | (0x03 << S3C24XX_PLLCON_SDIVSHIFT);
+ tmp = (0x78 << S3C24XX_PLL_MDIV_SHIFT)
+ | (0x02 << S3C24XX_PLL_PDIV_SHIFT)
+ | (0x03 << S3C24XX_PLL_SDIV_SHIFT);
writel(tmp, S3C2410_UPLLCON);
gpio_request(S3C2410_GPC(0), "LCD power");
#include <mach/regs-gpio.h>
#include <mach/leds-gpio.h>
+#include <mach/regs-lcd.h>
#include <plat/regs-serial.h>
#include <mach/fb.h>
#include <plat/nand.h>
void __init s3c2410_map_io(void)
{
- s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
- s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
+ s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
+ s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc));
}
--- /dev/null
+/* linux/arch/arm/mach-s3c2412/gpio.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://armlinux.simtec.co.uk/.
+ *
+ * S3C2412/S3C2413 specific GPIO support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/hardware.h>
+
+#include <plat/gpio-core.h>
+
+int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
+{
+ struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+ unsigned long offs = pin - chip->chip.base;
+ unsigned long flags;
+ unsigned long slpcon;
+
+ offs *= 2;
+
+ if (pin < S3C2410_GPB(0))
+ return -EINVAL;
+
+ if (pin >= S3C2410_GPF(0) &&
+ pin <= S3C2410_GPG(16))
+ return -EINVAL;
+
+ if (pin > S3C2410_GPH(16))
+ return -EINVAL;
+
+ local_irq_save(flags);
+
+ slpcon = __raw_readl(chip->base + 0x0C);
+
+ slpcon &= ~(3 << offs);
+ slpcon |= state << offs;
+
+ __raw_writel(slpcon, chip->base + 0x0C);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(s3c2412_gpio_set_sleepcfg);
select CPU_ARM926T
select S3C2416_DMA if S3C2410_DMA
select CPU_LLSERIAL_S3C2440
- select S3C_GPIO_PULL_UPDOWN
select SAMSUNG_CLKSRC
select S3C2443_CLOCK
help
#include <plat/cpu.h>
#include <plat/cpu-freq.h>
-#include <plat/pll6553x.h>
#include <plat/pll.h>
#include <asm/mach/map.h>
#include <mach/regs-clock.h>
#include <mach/regs-s3c2443-clock.h>
+/* armdiv
+ *
+ * this clock is sourced from msysclk and can have a number of
+ * divider values applied to it to then be fed into armclk.
+ * The real clock definition is done in s3c2443-clock.c,
+ * only the armdiv divisor table must be defined here.
+*/
+
static unsigned int armdiv[8] = {
[0] = 1,
[1] = 2,
[7] = 8,
};
+static struct clksrc_clk hsspi_eplldiv = {
+ .clk = {
+ .name = "hsspi-eplldiv",
+ .parent = &clk_esysclk.clk,
+ .ctrlbit = (1 << 14),
+ .enable = s3c2443_clkcon_enable_s,
+ },
+ .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 24 },
+};
+
+static struct clk *hsspi_sources[] = {
+ [0] = &hsspi_eplldiv.clk,
+ [1] = NULL, /* to fix */
+};
+
+static struct clksrc_clk hsspi_mux = {
+ .clk = {
+ .name = "hsspi-if",
+ },
+ .sources = &(struct clksrc_sources) {
+ .sources = hsspi_sources,
+ .nr_sources = ARRAY_SIZE(hsspi_sources),
+ },
+ .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 18 },
+};
+
static struct clksrc_clk hsmmc_div[] = {
[0] = {
.clk = {
.ctrlbit = S3C2416_HCLKCON_HSMMC0,
};
-static inline unsigned int s3c2416_fclk_div(unsigned long clkcon0)
-{
- clkcon0 &= 7 << S3C2443_CLKDIV0_ARMDIV_SHIFT;
-
- return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
-}
-
void __init_or_cpufreq s3c2416_setup_clocks(void)
{
- s3c2443_common_setup_clocks(s3c2416_get_pll, s3c2416_fclk_div);
+ s3c2443_common_setup_clocks(s3c2416_get_pll);
}
static struct clksrc_clk *clksrcs[] __initdata = {
+ &hsspi_eplldiv,
+ &hsspi_mux,
&hsmmc_div[0],
&hsmmc_div[1],
&hsmmc_mux[0],
clk_epll.parent = &clk_epllref.clk;
- s3c2443_common_init_clocks(xtal, s3c2416_get_pll, s3c2416_fclk_div);
+ s3c2443_common_init_clocks(xtal, s3c2416_get_pll,
+ armdiv, ARRAY_SIZE(armdiv),
+ S3C2416_CLKDIV0_ARMDIV_MASK);
for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
s3c_register_clksrc(clksrcs[ptr], 1);
#include <plat/iic-core.h>
#include <plat/fb-core.h>
#include <plat/nand-core.h>
+#include <plat/adc-core.h>
static struct map_desc s3c2416_iodesc[] __initdata = {
IODESC_ENT(WATCHDOG),
s3c_fb_setname("s3c2443-fb");
+ s3c_adc_setname("s3c2416-adc");
+
#ifdef CONFIG_PM
register_syscore_ops(&s3c2416_pm_syscore_ops);
#endif
void __init s3c2416_map_io(void)
{
- s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_updown;
- s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_updown;
+ s3c24xx_gpiocfg_default.set_pull = samsung_gpio_setpull_updown;
+ s3c24xx_gpiocfg_default.get_pull = samsung_gpio_getpull_updown;
/* initialize device information early */
s3c2416_default_sdhci0();
* published by the Free Software Foundation.
*/
-#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
[2] = "hsmmc-if",
/* [3] = "48m", - note not successfully used yet */
};
-
-void s3c2416_setup_sdhci_cfg_card(struct platform_device *dev,
- void __iomem *r,
- struct mmc_ios *ios,
- struct mmc_card *card)
-{
- u32 ctrl2, ctrl3;
-
- ctrl2 = __raw_readl(r + S3C_SDHCI_CONTROL2);
- ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
- ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
- S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
- S3C_SDHCI_CTRL2_ENFBCLKRX |
- S3C_SDHCI_CTRL2_DFCNT_NONE |
- S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
- if (ios->clock < 25 * 1000000)
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
- S3C_SDHCI_CTRL3_FCSEL2 |
- S3C_SDHCI_CTRL3_FCSEL1 |
- S3C_SDHCI_CTRL3_FCSEL0);
- else
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
- __raw_writel(ctrl2, r + S3C_SDHCI_CONTROL2);
- __raw_writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
config CPU_S3C2440
bool
select CPU_ARM920T
- select S3C_GPIO_PULL_UP
select S3C2410_CLOCK
select S3C2410_PM if PM
select S3C2440_DMA if S3C2410_DMA
config CPU_S3C2442
bool
select CPU_ARM920T
- select S3C_GPIO_PULL_DOWN
select S3C2410_CLOCK
select S3C2410_PM if PM
select CPU_S3C244X
#include <mach/regs-gpio.h>
#include <mach/regs-gpioj.h>
+#include <mach/regs-lcd.h>
#include <mach/h1940.h>
#include <mach/fb.h>
{
s3c244x_map_io();
- s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
- s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
+ s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
+ s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
}
{
s3c244x_map_io();
- s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1down;
- s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1down;
+ s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1down;
+ s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1down;
}
select CPU_LLSERIAL_S3C2440
select SAMSUNG_CLKSRC
select S3C2443_CLOCK
- select S3C_GPIO_PULL_S3C2443
help
Support for the S3C2443 SoC from the S3C24XX line
/* clock selections */
-static struct clk clk_i2s_ext = {
- .name = "i2s-ext",
-};
-
/* armdiv
*
* this clock is sourced from msysclk and can have a number of
* divider values applied to it to then be fed into armclk.
+ * The real clock definition is done in s3c2443-clock.c,
+ * only the armdiv divisor table must be defined here.
*/
-/* armdiv divisor table */
-
static unsigned int armdiv[16] = {
[S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 1,
[S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 2,
[S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 16,
};
-static inline unsigned int s3c2443_fclk_div(unsigned long clkcon0)
-{
- clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
-
- return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
-}
-
-static unsigned long s3c2443_armclk_roundrate(struct clk *clk,
- unsigned long rate)
-{
- unsigned long parent = clk_get_rate(clk->parent);
- unsigned long calc;
- unsigned best = 256; /* bigger than any value */
- unsigned div;
- int ptr;
-
- for (ptr = 0; ptr < ARRAY_SIZE(armdiv); ptr++) {
- div = armdiv[ptr];
- calc = parent / div;
- if (calc <= rate && div < best)
- best = div;
- }
-
- return parent / best;
-}
-
-static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
-{
- unsigned long parent = clk_get_rate(clk->parent);
- unsigned long calc;
- unsigned div;
- unsigned best = 256; /* bigger than any value */
- int ptr;
- int val = -1;
-
- for (ptr = 0; ptr < ARRAY_SIZE(armdiv); ptr++) {
- div = armdiv[ptr];
- calc = parent / div;
- if (calc <= rate && div < best) {
- best = div;
- val = ptr;
- }
- }
-
- if (val >= 0) {
- unsigned long clkcon0;
-
- clkcon0 = __raw_readl(S3C2443_CLKDIV0);
- clkcon0 &= ~S3C2443_CLKDIV0_ARMDIV_MASK;
- clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
- __raw_writel(clkcon0, S3C2443_CLKDIV0);
- }
-
- return (val == -1) ? -EINVAL : 0;
-}
-
-static struct clk clk_armdiv = {
- .name = "armdiv",
- .parent = &clk_msysclk.clk,
- .ops = &(struct clk_ops) {
- .round_rate = s3c2443_armclk_roundrate,
- .set_rate = s3c2443_armclk_setrate,
- },
-};
-
-/* armclk
- *
- * this is the clock fed into the ARM core itself, from armdiv or from hclk.
- */
-
-static struct clk *clk_arm_sources[] = {
- [0] = &clk_armdiv,
- [1] = &clk_h,
-};
-
-static struct clksrc_clk clk_arm = {
- .clk = {
- .name = "armclk",
- },
- .sources = &(struct clksrc_sources) {
- .sources = clk_arm_sources,
- .nr_sources = ARRAY_SIZE(clk_arm_sources),
- },
- .reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 },
-};
-
/* hsspi
*
* high-speed spi clock, sourced from esysclk
static struct clksrc_clk clk_hsspi = {
.clk = {
- .name = "hsspi",
+ .name = "hsspi-if",
.parent = &clk_esysclk.clk,
.ctrlbit = S3C2443_SCLKCON_HSSPICLK,
.enable = s3c2443_clkcon_enable_s,
},
};
-/* i2s_eplldiv
- *
- * This clock is the output from the I2S divisor of ESYSCLK, and is separate
- * from the mux that comes after it (cannot merge into one single clock)
-*/
-
-static struct clksrc_clk clk_i2s_eplldiv = {
- .clk = {
- .name = "i2s-eplldiv",
- .parent = &clk_esysclk.clk,
- },
- .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, },
-};
-
-/* i2s-ref
- *
- * i2s bus reference clock, selectable from external, esysclk or epllref
- *
- * Note, this used to be two clocks, but was compressed into one.
-*/
-
-struct clk *clk_i2s_srclist[] = {
- [0] = &clk_i2s_eplldiv.clk,
- [1] = &clk_i2s_ext,
- [2] = &clk_epllref.clk,
- [3] = &clk_epllref.clk,
-};
-
-static struct clksrc_clk clk_i2s = {
- .clk = {
- .name = "i2s-if",
- .ctrlbit = S3C2443_SCLKCON_I2SCLK,
- .enable = s3c2443_clkcon_enable_s,
-
- },
- .sources = &(struct clksrc_sources) {
- .sources = clk_i2s_srclist,
- .nr_sources = ARRAY_SIZE(clk_i2s_srclist),
- },
- .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
-};
-
/* standard clock definitions */
static struct clk init_clocks_off[] = {
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_SDI,
- }, {
- .name = "iis",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_IIS,
}, {
.name = "spi",
.devname = "s3c2410-spi.0",
}
};
-static struct clk init_clocks[] = {
-};
-
/* clocks to add straight away */
static struct clksrc_clk *clksrcs[] __initdata = {
- &clk_arm,
- &clk_i2s_eplldiv,
- &clk_i2s,
&clk_hsspi,
&clk_hsmmc_div,
};
static struct clk *clks[] __initdata = {
&clk_hsmmc,
- &clk_armdiv,
};
void __init_or_cpufreq s3c2443_setup_clocks(void)
{
- s3c2443_common_setup_clocks(s3c2443_get_mpll, s3c2443_fclk_div);
+ s3c2443_common_setup_clocks(s3c2443_get_mpll);
}
void __init s3c2443_init_clocks(int xtal)
clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
clk_epll.parent = &clk_epllref.clk;
- s3c2443_common_init_clocks(xtal, s3c2443_get_mpll, s3c2443_fclk_div);
+ s3c2443_common_init_clocks(xtal, s3c2443_get_mpll,
+ armdiv, ARRAY_SIZE(armdiv),
+ S3C2443_CLKDIV0_ARMDIV_MASK);
s3c2443_setup_clocks();
for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
s3c_register_clksrc(clksrcs[ptr], 1);
- /* register clocks from clock array */
-
- s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-
/* We must be careful disabling the clocks we are not intending to
* be using at boot time, as subsystems such as the LCD which do
* their own DMA requests to the bus can cause the system to lockup
#include <plat/cpu.h>
#include <plat/fb-core.h>
#include <plat/nand-core.h>
+#include <plat/adc-core.h>
static struct map_desc s3c2443_iodesc[] __initdata = {
IODESC_ENT(WATCHDOG),
s3c_nand_setname("s3c2412-nand");
s3c_fb_setname("s3c2443-fb");
+ s3c_adc_setname("s3c2443-adc");
+
/* change WDT IRQ number */
s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
s3c_device_wdt.resource[1].end = IRQ_S3C2443_WDT;
void __init s3c2443_map_io(void)
{
- s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_s3c2443;
- s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_s3c2443;
+ s3c24xx_gpiocfg_default.set_pull = s3c2443_gpio_setpull;
+ s3c24xx_gpiocfg_default.get_pull = s3c2443_gpio_getpull;
iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
}
select S3C_DEV_RTC
select S3C64XX_DEV_SPI
select S3C24XX_GPIO_EXTRA128
+ select I2C
help
Machine support for the Wolfson Cragganmore S3C6410 variant.
# Core files
obj-y += cpu.o
obj-y += clock.o
-obj-y += gpiolib.o
# Core support for S3C6400 system
obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o
obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o
obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o
-obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o
+obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o
# device support
obj-y += dev-uart.o
obj-y += dev-audio.o
obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
-obj-$(CONFIG_S3C64XX_DEV_TS) += dev-ts.o
-obj-$(CONFIG_S3C64XX_DEV_ONENAND1) += dev-onenand1.o
#include <mach/regs-sys.h>
#include <mach/regs-clock.h>
-#include <mach/pll.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/cpu-freq.h>
#include <plat/clock.h>
#include <plat/clock-clksrc.h>
+#include <plat/pll.h>
/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
* ext_xtal_mux for want of an actual name from the manual.
/* For now assume the mux always selects the crystal */
clk_ext_xtal_mux.parent = xtal_clk;
- epll = s3c6400_get_epll(xtal);
+ epll = s3c_get_pll6553x(xtal, __raw_readl(S3C_EPLL_CON0),
+ __raw_readl(S3C_EPLL_CON1));
mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON));
apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON));
printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n",
apll, mpll, epll);
- hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
+ if(__raw_readl(S3C64XX_OTHERS) & S3C64XX_OTHERS_SYNCMUXSEL)
+ /* Synchronous mode */
+ hclk2 = apll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
+ else
+ /* Asynchronous mode */
+ hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
+
hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK);
pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK);
#include <plat/devs.h>
#include <plat/clock.h>
-#include <mach/s3c6400.h>
-#include <mach/s3c6410.h>
+#include <plat/s3c6400.h>
+#include <plat/s3c6410.h>
/* table of supported CPUs */
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
+#include <linux/export.h>
#include <mach/irqs.h>
#include <mach/map.h>
+++ /dev/null
-/*
- * linux/arch/arm/mach-s3c64xx/dev-onenand1.c
- *
- * Copyright (c) 2008-2010 Samsung Electronics
- * Kyungmin Park <kyungmin.park@samsung.com>
- *
- * S3C64XX series device definition for OneNAND devices
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/onenand.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-
-static struct resource s3c64xx_onenand1_resources[] = {
- [0] = {
- .start = S3C64XX_PA_ONENAND1,
- .end = S3C64XX_PA_ONENAND1 + 0x400 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = S3C64XX_PA_ONENAND1_BUF,
- .end = S3C64XX_PA_ONENAND1_BUF + S3C64XX_SZ_ONENAND1_BUF - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = IRQ_ONENAND1,
- .end = IRQ_ONENAND1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device s3c64xx_device_onenand1 = {
- .name = "samsung-onenand",
- .id = 1,
- .num_resources = ARRAY_SIZE(s3c64xx_onenand1_resources),
- .resource = s3c64xx_onenand1_resources,
-};
-
-void s3c64xx_onenand1_set_platdata(struct onenand_platform_data *pdata)
-{
- s3c_set_platdata(pdata, sizeof(struct onenand_platform_data),
- &s3c64xx_device_onenand1);
-}
}
/* Set all DMA configuration to be DMA, not SDMA */
- writel(0xffffff, S3C_SYSREG(0x110));
+ writel(0xffffff, S3C64XX_SDMA_SEL);
/* Register standard DMA controllers */
s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000);
+++ /dev/null
-/* arch/arm/plat-s3c64xx/gpiolib.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX - GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <mach/regs-gpio.h>
-
-/* GPIO bank summary:
- *
- * Bank GPIOs Style SlpCon ExtInt Group
- * A 8 4Bit Yes 1
- * B 7 4Bit Yes 1
- * C 8 4Bit Yes 2
- * D 5 4Bit Yes 3
- * E 5 4Bit Yes None
- * F 16 2Bit Yes 4 [1]
- * G 7 4Bit Yes 5
- * H 10 4Bit[2] Yes 6
- * I 16 2Bit Yes None
- * J 12 2Bit Yes None
- * K 16 4Bit[2] No None
- * L 15 4Bit[2] No None
- * M 6 4Bit No IRQ_EINT
- * N 16 2Bit No IRQ_EINT
- * O 16 2Bit Yes 7
- * P 15 2Bit Yes 8
- * Q 9 2Bit Yes 9
- *
- * [1] BANKF pins 14,15 do not form part of the external interrupt sources
- * [2] BANK has two control registers, GPxCON0 and GPxCON1
- */
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_noint = {
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .get_config = s3c_gpio_getcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = {
- .cfg_eint = 7,
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .get_config = s3c_gpio_getcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = {
- .cfg_eint = 3,
- .get_config = s3c_gpio_getcfg_s3c64xx_4bit,
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-static int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin)
-{
- return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
-}
-
-static struct s3c_gpio_chip gpio_4bit[] = {
- {
- .base = S3C64XX_GPA_BASE,
- .config = &gpio_4bit_cfg_eint0111,
- .chip = {
- .base = S3C64XX_GPA(0),
- .ngpio = S3C64XX_GPIO_A_NR,
- .label = "GPA",
- },
- }, {
- .base = S3C64XX_GPB_BASE,
- .config = &gpio_4bit_cfg_eint0111,
- .chip = {
- .base = S3C64XX_GPB(0),
- .ngpio = S3C64XX_GPIO_B_NR,
- .label = "GPB",
- },
- }, {
- .base = S3C64XX_GPC_BASE,
- .config = &gpio_4bit_cfg_eint0111,
- .chip = {
- .base = S3C64XX_GPC(0),
- .ngpio = S3C64XX_GPIO_C_NR,
- .label = "GPC",
- },
- }, {
- .base = S3C64XX_GPD_BASE,
- .config = &gpio_4bit_cfg_eint0111,
- .chip = {
- .base = S3C64XX_GPD(0),
- .ngpio = S3C64XX_GPIO_D_NR,
- .label = "GPD",
- },
- }, {
- .base = S3C64XX_GPE_BASE,
- .config = &gpio_4bit_cfg_noint,
- .chip = {
- .base = S3C64XX_GPE(0),
- .ngpio = S3C64XX_GPIO_E_NR,
- .label = "GPE",
- },
- }, {
- .base = S3C64XX_GPG_BASE,
- .config = &gpio_4bit_cfg_eint0111,
- .chip = {
- .base = S3C64XX_GPG(0),
- .ngpio = S3C64XX_GPIO_G_NR,
- .label = "GPG",
- },
- }, {
- .base = S3C64XX_GPM_BASE,
- .config = &gpio_4bit_cfg_eint0011,
- .chip = {
- .base = S3C64XX_GPM(0),
- .ngpio = S3C64XX_GPIO_M_NR,
- .label = "GPM",
- .to_irq = s3c64xx_gpio2int_gpm,
- },
- },
-};
-
-static int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin)
-{
- return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
-}
-
-static struct s3c_gpio_chip gpio_4bit2[] = {
- {
- .base = S3C64XX_GPH_BASE + 0x4,
- .config = &gpio_4bit_cfg_eint0111,
- .chip = {
- .base = S3C64XX_GPH(0),
- .ngpio = S3C64XX_GPIO_H_NR,
- .label = "GPH",
- },
- }, {
- .base = S3C64XX_GPK_BASE + 0x4,
- .config = &gpio_4bit_cfg_noint,
- .chip = {
- .base = S3C64XX_GPK(0),
- .ngpio = S3C64XX_GPIO_K_NR,
- .label = "GPK",
- },
- }, {
- .base = S3C64XX_GPL_BASE + 0x4,
- .config = &gpio_4bit_cfg_eint0011,
- .chip = {
- .base = S3C64XX_GPL(0),
- .ngpio = S3C64XX_GPIO_L_NR,
- .label = "GPL",
- .to_irq = s3c64xx_gpio2int_gpl,
- },
- },
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_noint = {
- .set_config = s3c_gpio_setcfg_s3c24xx,
- .get_config = s3c_gpio_getcfg_s3c24xx,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = {
- .cfg_eint = 2,
- .set_config = s3c_gpio_setcfg_s3c24xx,
- .get_config = s3c_gpio_getcfg_s3c24xx,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = {
- .cfg_eint = 3,
- .set_config = s3c_gpio_setcfg_s3c24xx,
- .get_config = s3c_gpio_getcfg_s3c24xx,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_chip gpio_2bit[] = {
- {
- .base = S3C64XX_GPF_BASE,
- .config = &gpio_2bit_cfg_eint11,
- .chip = {
- .base = S3C64XX_GPF(0),
- .ngpio = S3C64XX_GPIO_F_NR,
- .label = "GPF",
- },
- }, {
- .base = S3C64XX_GPI_BASE,
- .config = &gpio_2bit_cfg_noint,
- .chip = {
- .base = S3C64XX_GPI(0),
- .ngpio = S3C64XX_GPIO_I_NR,
- .label = "GPI",
- },
- }, {
- .base = S3C64XX_GPJ_BASE,
- .config = &gpio_2bit_cfg_noint,
- .chip = {
- .base = S3C64XX_GPJ(0),
- .ngpio = S3C64XX_GPIO_J_NR,
- .label = "GPJ",
- },
- }, {
- .base = S3C64XX_GPN_BASE,
- .irq_base = IRQ_EINT(0),
- .config = &gpio_2bit_cfg_eint10,
- .chip = {
- .base = S3C64XX_GPN(0),
- .ngpio = S3C64XX_GPIO_N_NR,
- .label = "GPN",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = S3C64XX_GPO_BASE,
- .config = &gpio_2bit_cfg_eint11,
- .chip = {
- .base = S3C64XX_GPO(0),
- .ngpio = S3C64XX_GPIO_O_NR,
- .label = "GPO",
- },
- }, {
- .base = S3C64XX_GPP_BASE,
- .config = &gpio_2bit_cfg_eint11,
- .chip = {
- .base = S3C64XX_GPP(0),
- .ngpio = S3C64XX_GPIO_P_NR,
- .label = "GPP",
- },
- }, {
- .base = S3C64XX_GPQ_BASE,
- .config = &gpio_2bit_cfg_eint11,
- .chip = {
- .base = S3C64XX_GPQ(0),
- .ngpio = S3C64XX_GPIO_Q_NR,
- .label = "GPQ",
- },
- },
-};
-
-static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip)
-{
- chip->pm = __gpio_pm(&s3c_gpio_pm_2bit);
-}
-
-static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips,
- int nr_chips,
- void (*fn)(struct s3c_gpio_chip *))
-{
- for (; nr_chips > 0; nr_chips--, chips++) {
- if (fn)
- (fn)(chips);
- s3c_gpiolib_add(chips);
- }
-}
-
-static __init int s3c64xx_gpiolib_init(void)
-{
- s3c64xx_gpiolib_add(gpio_4bit, ARRAY_SIZE(gpio_4bit),
- samsung_gpiolib_add_4bit);
-
- s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2),
- samsung_gpiolib_add_4bit2);
-
- s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit),
- s3c64xx_gpiolib_add_2bit);
-
- return 0;
-}
-
-core_initcall(s3c64xx_gpiolib_init);
+++ /dev/null
-#ifndef __MACH_CLKDEV_H__
-#define __MACH_CLKDEV_H__
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do {} while (0)
-
-#endif
--- /dev/null
+/* Cragganmore 6410 shared definitions
+ *
+ * Copyright 2011 Wolfson Microelectronics plc
+ * Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef MACH_CRAG6410_H
+#define MACH_CRAG6410_H
+
+#include <linux/gpio.h>
+
+#define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START
+#define GLENFARCLAS_PMIC_IRQ_BASE (IRQ_BOARD_START + 64)
+
+#define PCA935X_GPIO_BASE GPIO_BOARD_START
+#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8)
+#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 16)
+
+#endif
+++ /dev/null
-/* arch/arm/plat-s3c64xx/include/plat/pll.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX PLL code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C6400_PLL_MDIV_MASK ((1 << (25-16+1)) - 1)
-#define S3C6400_PLL_PDIV_MASK ((1 << (13-8+1)) - 1)
-#define S3C6400_PLL_SDIV_MASK ((1 << (2-0+1)) - 1)
-#define S3C6400_PLL_MDIV_SHIFT (16)
-#define S3C6400_PLL_PDIV_SHIFT (8)
-#define S3C6400_PLL_SDIV_SHIFT (0)
-
-#include <asm/div64.h>
-#include <plat/pll6553x.h>
-
-static inline unsigned long s3c6400_get_pll(unsigned long baseclk,
- u32 pllcon)
-{
- u32 mdiv, pdiv, sdiv;
- u64 fvco = baseclk;
-
- mdiv = (pllcon >> S3C6400_PLL_MDIV_SHIFT) & S3C6400_PLL_MDIV_MASK;
- pdiv = (pllcon >> S3C6400_PLL_PDIV_SHIFT) & S3C6400_PLL_PDIV_MASK;
- sdiv = (pllcon >> S3C6400_PLL_SDIV_SHIFT) & S3C6400_PLL_SDIV_MASK;
-
- fvco *= mdiv;
- do_div(fvco, (pdiv << sdiv));
-
- return (unsigned long)fvco;
-}
-
-static inline unsigned long s3c6400_get_epll(unsigned long baseclk)
-{
- return s3c_get_pll6553x(baseclk, __raw_readl(S3C_EPLL_CON0),
- __raw_readl(S3C_EPLL_CON1));
-}
__raw_writel(0, S3C64XX_SLPEN);
}
-static inline void s3c_pm_saved_gpios(void)
+static inline void samsung_pm_saved_gpios(void)
{
/* turn on the sleep mode and keep it there, as it seems that during
* suspend the xCON registers get re-set and thus you can end up with
+++ /dev/null
-/* linux/arch/arm/mach-s3c6400/include/mach/pwm-clock.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64xx - pwm clock and timer support
- */
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
- return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
- return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
- return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
- return ilog2(div);
-}
-
-#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
#define S3C64XX_AHB_CON1 S3C_SYSREG(0x104)
#define S3C64XX_AHB_CON2 S3C_SYSREG(0x108)
+#define S3C64XX_SDMA_SEL S3C_SYSREG(0x110)
+
#define S3C64XX_OTHERS S3C_SYSREG(0x900)
#define S3C64XX_OTHERS_USBMASK (1 << 16)
+#define S3C64XX_OTHERS_SYNCMUXSEL (1 << 6)
#endif /* _PLAT_REGS_SYS_H */
+++ /dev/null
-/* arch/arm/mach-s3c64xx/include/macht/s3c6400.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * Header file for s3c6400 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S3C6400 related SoCs */
-
-extern void s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c6400_setup_clocks(void);
-
-extern void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit);
-
-#ifdef CONFIG_CPU_S3C6400
-
-extern int s3c6400_init(void);
-extern void s3c6400_init_irq(void);
-extern void s3c6400_map_io(void);
-extern void s3c6400_init_clocks(int xtal);
-
-#define s3c6400_init_uarts s3c6400_common_init_uarts
-
-#else
-#define s3c6400_init_clocks NULL
-#define s3c6400_init_uarts NULL
-#define s3c6400_map_io NULL
-#define s3c6400_init NULL
-#endif
+++ /dev/null
-/* arch/arm/mach-s3c64xx/include/mach/s3c6410.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * Header file for s3c6410 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C6410
-
-extern int s3c6410_init(void);
-extern void s3c6410_init_irq(void);
-extern void s3c6410_map_io(void);
-extern void s3c6410_init_clocks(int xtal);
-
-#define s3c6410_init_uarts s3c6400_common_init_uarts
-
-#else
-#define s3c6410_init_clocks NULL
-#define s3c6410_init_uarts NULL
-#define s3c6410_map_io NULL
-#define s3c6410_init NULL
-#endif
#include <plat/fb.h>
#include <plat/regs-fb-v4.h>
-#include <mach/s3c6410.h>
+#include <plat/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
--- /dev/null
+/* Speyside modules for Cragganmore - board data probing
+ *
+ * Copyright 2011 Wolfson Microelectronics plc
+ * Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+
+#include <linux/mfd/wm831x/irq.h>
+#include <linux/mfd/wm831x/gpio.h>
+
+#include <sound/wm8996.h>
+#include <sound/wm8962.h>
+#include <sound/wm9081.h>
+
+#include <mach/crag6410.h>
+
+static struct wm8996_retune_mobile_config wm8996_retune[] = {
+ {
+ .name = "Sub LPF",
+ .rate = 48000,
+ .regs = {
+ 0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
+ 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
+ 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
+ },
+ },
+ {
+ .name = "Sub HPF",
+ .rate = 48000,
+ .regs = {
+ 0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
+ 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
+ 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
+ },
+ },
+};
+
+static struct wm8996_pdata wm8996_pdata __initdata = {
+ .ldo_ena = S3C64XX_GPN(7),
+ .gpio_base = CODEC_GPIO_BASE,
+ .micdet_def = 1,
+ .inl_mode = WM8996_DIFFERRENTIAL_1,
+ .inr_mode = WM8996_DIFFERRENTIAL_1,
+
+ .irq_flags = IRQF_TRIGGER_RISING,
+
+ .gpio_default = {
+ 0x8001, /* GPIO1 == ADCLRCLK1 */
+ 0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */
+ 0x0141, /* GPIO3 == HP_SEL */
+ 0x0002, /* GPIO4 == IRQ */
+ 0x020e, /* GPIO5 == CLKOUT */
+ },
+
+ .retune_mobile_cfgs = wm8996_retune,
+ .num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune),
+};
+
+static struct wm8962_pdata wm8962_pdata __initdata = {
+ .gpio_init = {
+ 0,
+ WM8962_GPIO_FN_OPCLK,
+ WM8962_GPIO_FN_DMICCLK,
+ 0,
+ 0x8000 | WM8962_GPIO_FN_DMICDAT,
+ WM8962_GPIO_FN_IRQ, /* Open drain mode */
+ },
+ .irq_active_low = true,
+};
+
+static struct wm9081_pdata wm9081_pdata __initdata = {
+ .irq_high = false,
+ .irq_cmos = false,
+};
+
+static const struct i2c_board_info wm1254_devs[] = {
+ { I2C_BOARD_INFO("wm8996", 0x1a),
+ .platform_data = &wm8996_pdata,
+ .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+ },
+ { I2C_BOARD_INFO("wm9081", 0x6c),
+ .platform_data = &wm9081_pdata, },
+};
+
+static const struct i2c_board_info wm1255_devs[] = {
+ { I2C_BOARD_INFO("wm5100", 0x1a),
+ .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+ },
+ { I2C_BOARD_INFO("wm9081", 0x6c),
+ .platform_data = &wm9081_pdata, },
+};
+
+static const struct i2c_board_info wm1259_devs[] = {
+ { I2C_BOARD_INFO("wm8962", 0x1a),
+ .platform_data = &wm8962_pdata,
+ .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+ },
+};
+
+
+static __devinitdata const struct {
+ u8 id;
+ const char *name;
+ const struct i2c_board_info *i2c_devs;
+ int num_i2c_devs;
+} gf_mods[] = {
+ { .id = 0x01, .name = "1250-EV1 Springbank" },
+ { .id = 0x02, .name = "1251-EV1 Jura" },
+ { .id = 0x03, .name = "1252-EV1 Glenlivet" },
+ { .id = 0x11, .name = "6249-EV2 Glenfarclas", },
+ { .id = 0x21, .name = "1275-EV1 Mortlach" },
+ { .id = 0x25, .name = "1274-EV1 Glencadam" },
+ { .id = 0x31, .name = "1253-EV1 Tomatin", },
+ { .id = 0x39, .name = "1254-EV1 Dallas Dhu",
+ .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) },
+ { .id = 0x3a, .name = "1259-EV1 Tobermory",
+ .i2c_devs = wm1259_devs, .num_i2c_devs = ARRAY_SIZE(wm1259_devs) },
+ { .id = 0x3b, .name = "1255-EV1 Kilchoman",
+ .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) },
+ { .id = 0x3c, .name = "1273-EV1 Longmorn" },
+};
+
+static __devinit int wlf_gf_module_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *i2c_id)
+{
+ int ret, i, j, id, rev;
+
+ ret = i2c_smbus_read_byte_data(i2c, 0);
+ if (ret < 0) {
+ dev_err(&i2c->dev, "Failed to read ID: %d\n", ret);
+ return ret;
+ }
+
+ id = (ret & 0xfe) >> 2;
+ rev = ret & 0x3;
+ for (i = 0; i < ARRAY_SIZE(gf_mods); i++)
+ if (id == gf_mods[i].id)
+ break;
+
+ if (i < ARRAY_SIZE(gf_mods)) {
+ dev_info(&i2c->dev, "%s revision %d\n",
+ gf_mods[i].name, rev + 1);
+ for (j = 0; j < gf_mods[i].num_i2c_devs; j++) {
+ if (!i2c_new_device(i2c->adapter,
+ &(gf_mods[i].i2c_devs[j])))
+ dev_err(&i2c->dev,
+ "Failed to register dev: %d\n", ret);
+ }
+ } else {
+ dev_warn(&i2c->dev, "Unknown module ID %d revision %d\n",
+ id, rev);
+ }
+
+ return 0;
+}
+
+static const struct i2c_device_id wlf_gf_module_id[] = {
+ { "wlf-gf-module", 0 },
+ { }
+};
+
+static struct i2c_driver wlf_gf_module_driver = {
+ .driver = {
+ .name = "wlf-gf-module",
+ .owner = THIS_MODULE,
+ },
+ .probe = wlf_gf_module_probe,
+ .id_table = wlf_gf_module_id,
+};
+
+static int __init wlf_gf_module_register(void)
+{
+ return i2c_add_driver(&wlf_gf_module_driver);
+}
+module_init(wlf_gf_module_register);
#include <mach/hardware.h>
#include <mach/map.h>
-#include <mach/s3c6410.h>
#include <mach/regs-sys.h>
#include <mach/regs-gpio.h>
#include <mach/regs-modem.h>
+#include <mach/crag6410.h>
#include <mach/regs-gpio-memport.h>
+#include <plat/s3c6410.h>
#include <plat/regs-serial.h>
#include <plat/regs-fb-v4.h>
#include <plat/fb.h>
#include <plat/iic.h>
#include <plat/pm.h>
-#include <sound/wm8996.h>
-#include <sound/wm8962.h>
-#include <sound/wm9081.h>
-
-#define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START
-#define GLENFARCLAS_PMIC_IRQ_BASE (IRQ_BOARD_START + 64)
-
-#define PCA935X_GPIO_BASE GPIO_BOARD_START
-#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8)
-#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 16)
-
/* serial port setup */
#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
.id = -1,
};
+static struct platform_device lowland_device = {
+ .name = "lowland",
+ .id = -1,
+};
+
static struct platform_device speyside_wm8962_device = {
.name = "speyside-wm8962",
.id = -1,
static struct regulator_consumer_supply wallvdd_consumers[] = {
REGULATOR_SUPPLY("SPKVDD1", "1-001a"),
REGULATOR_SUPPLY("SPKVDD2", "1-001a"),
+ REGULATOR_SUPPLY("SPKVDDL", "1-001a"),
+ REGULATOR_SUPPLY("SPKVDDR", "1-001a"),
};
static struct regulator_init_data wallvdd_data = {
&crag6410_backlight_device,
&speyside_device,
&speyside_wm8962_device,
+ &lowland_device,
&wallvdd_device,
};
.irq_base = 0,
};
+/* VDDARM is controlled by DVS1 connected to GPK(0) */
+static struct wm831x_buckv_pdata vddarm_pdata = {
+ .dvs_control_src = 1,
+ .dvs_gpio = S3C64XX_GPK(0),
+};
+
static struct regulator_consumer_supply vddarm_consumers[] __initdata = {
REGULATOR_SUPPLY("vddarm", NULL),
};
.num_consumer_supplies = ARRAY_SIZE(vddarm_consumers),
.consumer_supplies = vddarm_consumers,
.supply_regulator = "WALLVDD",
+ .driver_data = &vddarm_pdata,
};
static struct regulator_init_data vddint __initdata = {
.backup = &banff_backup_pdata,
.gpio_defaults = {
+ /* GPIO5: DVS1_REQ - CMOS, DBVDD, active high */
+ [4] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA | 0x8,
/* GPIO11: Touchscreen data - CMOS, DBVDD, active high*/
[10] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x6,
/* GPIO12: Touchscreen pen down - CMOS, DBVDD, active high*/
};
static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = {
+ REGULATOR_SUPPLY("LDOVDD", "1-001a"),
REGULATOR_SUPPLY("PLLVDD", "1-001a"),
REGULATOR_SUPPLY("DBVDD", "1-001a"),
+ REGULATOR_SUPPLY("DBVDD1", "1-001a"),
+ REGULATOR_SUPPLY("DBVDD2", "1-001a"),
+ REGULATOR_SUPPLY("DBVDD3", "1-001a"),
REGULATOR_SUPPLY("CPVDD", "1-001a"),
REGULATOR_SUPPLY("AVDD2", "1-001a"),
REGULATOR_SUPPLY("DCVDD", "1-001a"),
.disable_touch = true,
};
-static struct wm8996_retune_mobile_config wm8996_retune[] = {
- {
- .name = "Sub LPF",
- .rate = 48000,
- .regs = {
- 0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
- 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
- 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
- },
- },
- {
- .name = "Sub HPF",
- .rate = 48000,
- .regs = {
- 0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
- 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
- 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
- },
- },
-};
-
-static struct wm8996_pdata wm8996_pdata __initdata = {
- .ldo_ena = S3C64XX_GPN(7),
- .gpio_base = CODEC_GPIO_BASE,
- .micdet_def = 1,
- .inl_mode = WM8996_DIFFERRENTIAL_1,
- .inr_mode = WM8996_DIFFERRENTIAL_1,
-
- .irq_flags = IRQF_TRIGGER_RISING,
-
- .gpio_default = {
- 0x8001, /* GPIO1 == ADCLRCLK1 */
- 0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */
- 0x0141, /* GPIO3 == HP_SEL */
- 0x0002, /* GPIO4 == IRQ */
- 0x020e, /* GPIO5 == CLKOUT */
- },
-
- .retune_mobile_cfgs = wm8996_retune,
- .num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune),
-};
-
-static struct wm8962_pdata wm8962_pdata __initdata = {
- .gpio_init = {
- 0,
- WM8962_GPIO_FN_OPCLK,
- WM8962_GPIO_FN_DMICCLK,
- 0,
- 0x8000 | WM8962_GPIO_FN_DMICDAT,
- WM8962_GPIO_FN_IRQ, /* Open drain mode */
- },
- .irq_active_low = true,
-};
-
-static struct wm9081_pdata wm9081_pdata __initdata = {
- .irq_high = false,
- .irq_cmos = false,
-};
-
static struct i2c_board_info i2c_devs1[] __initdata = {
{ I2C_BOARD_INFO("wm8311", 0x34),
.irq = S3C_EINT(0),
.platform_data = &glenfarclas_pmic_pdata },
+ { I2C_BOARD_INFO("wlf-gf-module", 0x24) },
+ { I2C_BOARD_INFO("wlf-gf-module", 0x25) },
+ { I2C_BOARD_INFO("wlf-gf-module", 0x26) },
+
{ I2C_BOARD_INFO("wm1250-ev1", 0x27) },
- { I2C_BOARD_INFO("wm8996", 0x1a),
- .platform_data = &wm8996_pdata,
- .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
- },
- { I2C_BOARD_INFO("wm9081", 0x6c),
- .platform_data = &wm9081_pdata, },
- { I2C_BOARD_INFO("wm8962", 0x1a),
- .platform_data = &wm8962_pdata,
- .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
- },
};
static void __init crag6410_map_io(void)
#include <plat/fb.h>
#include <plat/nand.h>
-#include <mach/s3c6410.h>
+#include <plat/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <mach/regs-gpio.h>
#include <mach/regs-modem.h>
#include <mach/regs-srom.h>
-#include <mach/s3c6410.h>
+#include <plat/s3c6410.h>
#include <plat/adc.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/iic.h>
#include <plat/fb.h>
-#include <mach/s3c6410.h>
+#include <plat/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <mach/regs-gpio.h>
#include <mach/regs-modem.h>
#include <mach/regs-srom.h>
-#include <mach/s3c6410.h>
+#include <plat/s3c6410.h>
#include <plat/adc.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <mach/map.h>
#include <mach/regs-gpio.h>
-#include <mach/s3c6410.h>
+#include <plat/s3c6410.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/fb.h>
#include <mach/map.h>
#include <mach/regs-gpio.h>
-#include <mach/s3c6410.h>
+#include <plat/s3c6410.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/regs-serial.h>
-#include <mach/s3c6400.h>
+#include <plat/s3c6400.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
-#include <mach/s3c6410.h>
+#include <plat/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <mach/regs-clock.h>
#include <mach/regs-syscon-power.h>
#include <mach/regs-gpio-memport.h>
+#include <mach/regs-modem.h>
#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
void s3c_pm_debug_smdkled(u32 set, u32 clear)
SAVE_ITEM(S3C64XX_MEM0CONSLP0),
SAVE_ITEM(S3C64XX_MEM0CONSLP1),
SAVE_ITEM(S3C64XX_MEM1CONSLP),
+
+ SAVE_ITEM(S3C64XX_SDMA_SEL),
+ SAVE_ITEM(S3C64XX_MODEM_MIFPCON),
};
void s3c_pm_configure_extint(void)
#include <plat/sdhci.h>
#include <plat/iic-core.h>
#include <plat/onenand-core.h>
-#include <mach/s3c6400.h>
+#include <plat/s3c6400.h>
void __init s3c6400_map_io(void)
{
#include <plat/adc-core.h>
#include <plat/iic-core.h>
#include <plat/onenand-core.h>
-#include <mach/s3c6400.h>
-#include <mach/s3c6410.h>
+#include <plat/s3c6400.h>
+#include <plat/s3c6410.h>
void __init s3c6410_map_io(void)
{
* published by the Free Software Foundation.
*/
-#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
[2] = "mmc_bus",
/* [3] = "48m", - note not successfully used yet */
};
-
-void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
- void __iomem *r,
- struct mmc_ios *ios,
- struct mmc_card *card)
-{
- u32 ctrl2, ctrl3;
-
- ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
- ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
- ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
- S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
- S3C_SDHCI_CTRL2_ENFBCLKRX |
- S3C_SDHCI_CTRL2_DFCNT_NONE |
- S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
- if (ios->clock < 25 * 1000000)
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
- S3C_SDHCI_CTRL3_FCSEL2 |
- S3C_SDHCI_CTRL3_FCSEL1 |
- S3C_SDHCI_CTRL3_FCSEL0);
- else
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
- pr_debug("%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
- writel(ctrl2, r + S3C_SDHCI_CONTROL2);
- writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
-
-void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev,
- void __iomem *r,
- struct mmc_ios *ios,
- struct mmc_card *card)
-{
- writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
-
- s3c6400_setup_sdhci_cfg_card(dev, r, ios, card);
-}
bool
select SAMSUNG_DMADEV
select S5P_HRT
+ select S5P_SLEEP if PM
+ select SAMSUNG_WAKEMASK if PM
help
Enable S5P6440 CPU support
bool
select SAMSUNG_DMADEV
select S5P_HRT
+ select S5P_SLEEP if PM
+ select SAMSUNG_WAKEMASK if PM
help
Enable S5P6450 CPU support
+config S5P64X0_SETUP_FB_24BPP
+ bool
+ help
+ Common setup code for S5P64X0 based boards with a LCD display
+ through RGB interface.
+
config S5P64X0_SETUP_I2C1
bool
help
config MACH_SMDK6440
bool "SMDK6440"
select CPU_S5P6440
+ select S3C_DEV_FB
select S3C_DEV_I2C1
select S3C_DEV_RTC
select S3C_DEV_WDT
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_TS
+ select S5P64X0_SETUP_FB_24BPP
select S5P64X0_SETUP_I2C1
help
Machine support for the Samsung SMDK6440
config MACH_SMDK6450
bool "SMDK6450"
select CPU_S5P6450
+ select S3C_DEV_FB
select S3C_DEV_I2C1
select S3C_DEV_RTC
select S3C_DEV_WDT
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_TS
+ select S5P64X0_SETUP_FB_24BPP
select S5P64X0_SETUP_I2C1
help
Machine support for the Samsung SMDK6450
# Core support for S5P64X0 system
-obj-$(CONFIG_ARCH_S5P64X0) += cpu.o init.o clock.o dma.o gpiolib.o
+obj-$(CONFIG_ARCH_S5P64X0) += cpu.o init.o clock.o dma.o
obj-$(CONFIG_ARCH_S5P64X0) += setup-i2c0.o irq-eint.o
obj-$(CONFIG_CPU_S5P6440) += clock-s5p6440.o
obj-$(CONFIG_CPU_S5P6450) += clock-s5p6450.o
+obj-$(CONFIG_PM) += pm.o irq-pm.o
# machine support
obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
obj-$(CONFIG_S5P64X0_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S5P64X0_SETUP_FB_24BPP) += setup-fb-24bpp.o
.ctrlbit = (1 << 8),
}, {
.name = "dma",
+ .devname = "dma-pl330",
.parent = &clk_hclk_low.clk,
.enable = s5p64x0_hclk0_ctrl,
.ctrlbit = (1 << 12),
.ctrlbit = (1 << 3),
}, {
.name = "dma",
+ .devname = "dma-pl330",
.parent = &clk_hclk_low.clk,
.enable = s5p64x0_hclk0_ctrl,
.ctrlbit = (1 << 12),
#include <plat/s5p6440.h>
#include <plat/s5p6450.h>
#include <plat/adc-core.h>
+#include <plat/fb-core.h>
/* Initial IO mappings */
{
/* initialize any device information early */
s3c_adc_setname("s3c64xx-adc");
+ s3c_fb_setname("s5p64x0-fb");
iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
{
/* initialize any device information early */
s3c_adc_setname("s3c64xx-adc");
+ s3c_fb_setname("s5p64x0-fb");
iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc));
+++ /dev/null
-#ifndef __MACH_CLKDEV_H__
-#define __MACH_CLKDEV_H__
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do {} while (0)
-
-#endif
#define IRQ_I2S0 IRQ_I2SV40
+#define IRQ_LCD_FIFO IRQ_DISPCON0
+#define IRQ_LCD_VSYNC IRQ_DISPCON1
+#define IRQ_LCD_SYSTEM IRQ_DISPCON2
+
/* S5P6450 EINT feature will be added */
/*
#define S5P64X0_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000))
+#define S5P64X0_PA_FB 0xEE000000
+
#define S5P64X0_PA_I2S 0xF2000000
#define S5P6450_PA_I2S1 0xF2800000
#define S5P6450_PA_I2S2 0xF2900000
#define S3C_PA_IIC1 S5P6440_PA_IIC1
#define S3C_PA_RTC S5P64X0_PA_RTC
#define S3C_PA_WDT S5P64X0_PA_WDT
+#define S3C_PA_FB S5P64X0_PA_FB
#define S5P_PA_CHIPID S5P64X0_PA_CHIPID
#define S5P_PA_SROMC S5P64X0_PA_SROMC
#define S5P_PA_UART5 S5P6450_PA_UART(5)
#define S5P_SZ_UART SZ_256
+#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
#endif /* __ASM_ARCH_MAP_H */
--- /dev/null
+/* linux/arch/arm/mach-s5p64x0/include/mach/pm-core.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5P64X0 - PM core support for arch/arm/plat-samsung/pm.c
+ *
+ * Based on PM core support for S3C64XX by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/regs-gpio.h>
+
+static inline void s3c_pm_debug_init_uart(void)
+{
+ u32 tmp = __raw_readl(S5P64X0_CLK_GATE_PCLK);
+
+ /*
+ * As a note, since the S5P64X0 UARTs generally have multiple
+ * clock sources, we simply enable PCLK at the moment and hope
+ * that the resume settings for the UART are suitable for the
+ * use with PCLK.
+ */
+ tmp |= S5P64X0_CLK_GATE_PCLK_UART0;
+ tmp |= S5P64X0_CLK_GATE_PCLK_UART1;
+ tmp |= S5P64X0_CLK_GATE_PCLK_UART2;
+ tmp |= S5P64X0_CLK_GATE_PCLK_UART3;
+
+ __raw_writel(tmp, S5P64X0_CLK_GATE_PCLK);
+ udelay(10);
+}
+
+static inline void s3c_pm_arch_prepare_irqs(void)
+{
+ /* VIC should have already been taken care of */
+
+ /* clear any pending EINT0 interrupts */
+ __raw_writel(__raw_readl(S5P64X0_EINT0PEND), S5P64X0_EINT0PEND);
+}
+
+static inline void s3c_pm_arch_stop_clocks(void) { }
+static inline void s3c_pm_arch_show_resume_irqs(void) { }
+
+/*
+ * make these defines, we currently do not have any need to change
+ * the IRQ wake controls depending on the CPU we are running on
+ */
+#define s3c_irqwake_eintallow ((1 << 16) - 1)
+#define s3c_irqwake_intallow (~0)
+
+static inline void s3c_pm_arch_update_uart(void __iomem *regs,
+ struct pm_uart_save *save)
+{
+ u32 ucon = __raw_readl(regs + S3C2410_UCON);
+ u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK;
+ u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK;
+ u32 new_ucon;
+ u32 delta;
+
+ /*
+ * S5P64X0 UART blocks only support level interrupts, so ensure that
+ * when we restore unused UART blocks we force the level interrupt
+ * settings.
+ */
+ save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
+
+ /*
+ * We have a constraint on changing the clock type of the UART
+ * between UCLKx and PCLK, so ensure that when we restore UCON
+ * that the CLK field is correctly modified if the bootloader
+ * has changed anything.
+ */
+ if (ucon_clk != save_clk) {
+ new_ucon = save->ucon;
+ delta = ucon_clk ^ save_clk;
+
+ /*
+ * change from UCLKx => wrong PCLK,
+ * either UCLK can be tested for by a bit-test
+ * with UCLK0
+ */
+ if (ucon_clk & S3C6400_UCON_UCLK0 &&
+ !(save_clk & S3C6400_UCON_UCLK0) &&
+ delta & S3C6400_UCON_PCLK2) {
+ new_ucon &= ~S3C6400_UCON_UCLK0;
+ } else if (delta == S3C6400_UCON_PCLK2) {
+ /*
+ * as a precaution, don't change from
+ * PCLK2 => PCLK or vice-versa
+ */
+ new_ucon ^= S3C6400_UCON_PCLK2;
+ }
+
+ S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
+ ucon, new_ucon, save->ucon);
+ save->ucon = new_ucon;
+ }
+}
+
+static inline void s3c_pm_restored_gpios(void)
+{
+ /* ensure sleep mode has been cleared from the system */
+ __raw_writel(0, S5P64X0_SLPEN);
+}
+
+static inline void samsung_pm_saved_gpios(void)
+{
+ /*
+ * turn on the sleep mode and keep it there, as it seems that during
+ * suspend the xCON registers get re-set and thus you can end up with
+ * problems between going to sleep and resuming.
+ */
+ __raw_writel(S5P64X0_SLPEN_USE_xSLP, S5P64X0_SLPEN);
+}
+++ /dev/null
-/* linux/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S5P64X0 - pwm clock and timer support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_PWMCLK_H
-#define __ASM_ARCH_PWMCLK_H __FILE__
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
- return 0;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
- return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
- return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
- return ilog2(div);
-}
-
-#define S3C_TCFG1_MUX_TCLK 0
-
-#endif /* __ASM_ARCH_PWMCLK_H */
#define S5P6450_DPLL_CON S5P_CLKREG(0x50)
#define S5P6450_DPLL_CON_K S5P_CLKREG(0x54)
+#define S5P64X0_AHB_CON0 S5P_CLKREG(0x100)
#define S5P64X0_CLK_SRC1 S5P_CLKREG(0x10C)
#define S5P64X0_SYS_ID S5P_CLKREG(0x118)
#define S5P64X0_SYS_OTHERS S5P_CLKREG(0x11C)
#define S5P64X0_PWR_CFG S5P_CLKREG(0x804)
+#define S5P64X0_EINT_WAKEUP_MASK S5P_CLKREG(0x808)
+#define S5P64X0_SLEEP_CFG S5P_CLKREG(0x818)
+#define S5P64X0_PWR_STABLE S5P_CLKREG(0x828)
+
#define S5P64X0_OTHERS S5P_CLKREG(0x900)
+#define S5P64X0_WAKEUP_STAT S5P_CLKREG(0x908)
+
+#define S5P64X0_INFORM0 S5P_CLKREG(0xA00)
#define S5P64X0_CLKDIV0_HCLK_SHIFT (8)
#define S5P64X0_CLKDIV0_HCLK_MASK (0xF << S5P64X0_CLKDIV0_HCLK_SHIFT)
+/* HCLK GATE Registers */
+#define S5P64X0_CLK_GATE_HCLK1_FIMGVG (1 << 2)
+#define S5P64X0_CLK_GATE_SCLK1_FIMGVG (1 << 2)
+
+/* PCLK GATE Registers */
+#define S5P64X0_CLK_GATE_PCLK_UART3 (1 << 4)
+#define S5P64X0_CLK_GATE_PCLK_UART2 (1 << 3)
+#define S5P64X0_CLK_GATE_PCLK_UART1 (1 << 2)
+#define S5P64X0_CLK_GATE_PCLK_UART0 (1 << 1)
+
+#define S5P64X0_PWR_CFG_MMC1_DISABLE (1 << 15)
+#define S5P64X0_PWR_CFG_MMC0_DISABLE (1 << 14)
+#define S5P64X0_PWR_CFG_RTC_TICK_DISABLE (1 << 11)
+#define S5P64X0_PWR_CFG_RTC_ALRM_DISABLE (1 << 10)
+#define S5P64X0_PWR_CFG_WFI_MASK (3 << 5)
+#define S5P64X0_PWR_CFG_WFI_SLEEP (3 << 5)
+
+#define S5P64X0_SLEEP_CFG_OSC_EN (1 << 0)
+
+#define S5P64X0_PWR_STABLE_PWR_CNT_VAL4 (4 << 0)
+
+#define S5P6450_OTHERS_DISABLE_INT (1 << 31)
+#define S5P64X0_OTHERS_RET_UART (1 << 26)
+#define S5P64X0_OTHERS_RET_MMC1 (1 << 25)
+#define S5P64X0_OTHERS_RET_MMC0 (1 << 24)
#define S5P64X0_OTHERS_USB_SIG_MASK (1 << 16)
/* Compatibility defines */
#define S5P6450_GPQ_BASE (S5P_VA_GPIO + 0x0180)
#define S5P6450_GPS_BASE (S5P_VA_GPIO + 0x0300)
+#define S5P64X0_SPCON0 (S5P_VA_GPIO + 0x1A0)
+#define S5P64X0_SPCON0_LCD_SEL_MASK (0x3 << 0)
+#define S5P64X0_SPCON0_LCD_SEL_RGB (0x1 << 0)
+#define S5P64X0_SPCON1 (S5P_VA_GPIO + 0x2B0)
+
+#define S5P64X0_MEM0CONSLP0 (S5P_VA_GPIO + 0x1C0)
+#define S5P64X0_MEM0CONSLP1 (S5P_VA_GPIO + 0x1C4)
+#define S5P64X0_MEM0DRVCON (S5P_VA_GPIO + 0x1D0)
+#define S5P64X0_MEM1DRVCON (S5P_VA_GPIO + 0x1D4)
+
+#define S5P64X0_EINT12CON (S5P_VA_GPIO + 0x200)
+#define S5P64X0_EINT12FLTCON (S5P_VA_GPIO + 0x220)
+#define S5P64X0_EINT12MASK (S5P_VA_GPIO + 0x240)
+
/* External interrupt control registers for group0 */
#define EINT0CON0_OFFSET (0x900)
+#define EINT0FLTCON0_OFFSET (0x910)
+#define EINT0FLTCON1_OFFSET (0x914)
#define EINT0MASK_OFFSET (0x920)
#define EINT0PEND_OFFSET (0x924)
#define S5P64X0_EINT0CON0 (S5P_VA_GPIO + EINT0CON0_OFFSET)
+#define S5P64X0_EINT0FLTCON0 (S5P_VA_GPIO + EINT0FLTCON0_OFFSET)
+#define S5P64X0_EINT0FLTCON1 (S5P_VA_GPIO + EINT0FLTCON1_OFFSET)
#define S5P64X0_EINT0MASK (S5P_VA_GPIO + EINT0MASK_OFFSET)
#define S5P64X0_EINT0PEND (S5P_VA_GPIO + EINT0PEND_OFFSET)
+#define S5P64X0_SLPEN (S5P_VA_GPIO + 0x930)
+#define S5P64X0_SLPEN_USE_xSLP (1 << 0)
+
#endif /* __ASM_ARCH_REGS_GPIO_H */
#include <plat/cpu.h>
#include <plat/regs-irqtype.h>
#include <plat/gpio-cfg.h>
+#include <plat/pm.h>
#include <mach/regs-gpio.h>
#include <mach/regs-clock.h>
ct->chip.irq_mask = irq_gc_mask_set_bit;
ct->chip.irq_unmask = irq_gc_mask_clr_bit;
ct->chip.irq_set_type = s5p64x0_irq_eint_set_type;
+ ct->chip.irq_set_wake = s3c_irqext_wake;
ct->regs.ack = EINT0PEND_OFFSET;
ct->regs.mask = EINT0MASK_OFFSET;
irq_setup_generic_chip(gc, IRQ_MSK(16), IRQ_GC_INIT_MASK_CACHE,
--- /dev/null
+/* linux/arch/arm/mach-s5p64x0/irq-pm.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5P64X0 - Interrupt handling Power Management
+ *
+ * Based on arch/arm/mach-s3c64xx/irq-pm.c by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/syscore_ops.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+
+#include <plat/regs-serial.h>
+#include <plat/pm.h>
+
+#include <mach/regs-gpio.h>
+
+static struct sleep_save irq_save[] = {
+ SAVE_ITEM(S5P64X0_EINT0CON0),
+ SAVE_ITEM(S5P64X0_EINT0FLTCON0),
+ SAVE_ITEM(S5P64X0_EINT0FLTCON1),
+ SAVE_ITEM(S5P64X0_EINT0MASK),
+};
+
+static struct irq_grp_save {
+ u32 con;
+ u32 fltcon;
+ u32 mask;
+} eint_grp_save[4];
+
+static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS];
+
+static int s5p64x0_irq_pm_suspend(void)
+{
+ struct irq_grp_save *grp = eint_grp_save;
+ int i;
+
+ S3C_PMDBG("%s: suspending IRQs\n", __func__);
+
+ s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+
+ for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+ irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+ for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+ grp->con = __raw_readl(S5P64X0_EINT12CON + (i * 4));
+ grp->mask = __raw_readl(S5P64X0_EINT12MASK + (i * 4));
+ grp->fltcon = __raw_readl(S5P64X0_EINT12FLTCON + (i * 4));
+ }
+
+ return 0;
+}
+
+static void s5p64x0_irq_pm_resume(void)
+{
+ struct irq_grp_save *grp = eint_grp_save;
+ int i;
+
+ S3C_PMDBG("%s: resuming IRQs\n", __func__);
+
+ s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+
+ for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+ __raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+ for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+ __raw_writel(grp->con, S5P64X0_EINT12CON + (i * 4));
+ __raw_writel(grp->mask, S5P64X0_EINT12MASK + (i * 4));
+ __raw_writel(grp->fltcon, S5P64X0_EINT12FLTCON + (i * 4));
+ }
+
+ S3C_PMDBG("%s: IRQ configuration restored\n", __func__);
+}
+
+static struct syscore_ops s5p64x0_irq_syscore_ops = {
+ .suspend = s5p64x0_irq_pm_suspend,
+ .resume = s5p64x0_irq_pm_resume,
+};
+
+static int __init s5p64x0_syscore_init(void)
+{
+ register_syscore_ops(&s5p64x0_irq_syscore_ops);
+
+ return 0;
+}
+core_initcall(s5p64x0_syscore_init);
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/pwm_backlight.h>
+#include <linux/fb.h>
+
+#include <video/platform_lcd.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/ts.h>
#include <plat/s5p-time.h>
#include <plat/backlight.h>
+#include <plat/fb.h>
+#include <plat/regs-fb.h>
#define SMDK6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
},
};
+/* Frame Buffer */
+static struct s3c_fb_pd_win smdk6440_fb_win0 = {
+ .win_mode = {
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 24,
+};
+
+static struct s3c_fb_platdata smdk6440_lcd_pdata __initdata = {
+ .win[0] = &smdk6440_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .setup_gpio = s5p64x0_fb_gpio_setup_24bpp,
+};
+
+/* LCD power controller */
+static void smdk6440_lte480_reset_power(struct plat_lcd_data *pd,
+ unsigned int power)
+{
+ int err;
+
+ if (power) {
+ err = gpio_request(S5P6440_GPN(5), "GPN");
+ if (err) {
+ printk(KERN_ERR "failed to request GPN for lcd reset\n");
+ return;
+ }
+
+ gpio_direction_output(S5P6440_GPN(5), 1);
+ gpio_set_value(S5P6440_GPN(5), 0);
+ gpio_set_value(S5P6440_GPN(5), 1);
+ gpio_free(S5P6440_GPN(5));
+ }
+}
+
+static struct plat_lcd_data smdk6440_lcd_power_data = {
+ .set_power = smdk6440_lte480_reset_power,
+};
+
+static struct platform_device smdk6440_lcd_lte480wv = {
+ .name = "platform-lcd",
+ .dev.parent = &s3c_device_fb.dev,
+ .dev.platform_data = &smdk6440_lcd_power_data,
+};
+
static struct platform_device *smdk6440_devices[] __initdata = {
&s3c_device_adc,
&s3c_device_rtc,
&s3c_device_wdt,
&samsung_asoc_dma,
&s5p6440_device_iis,
+ &s3c_device_fb,
+ &smdk6440_lcd_lte480wv,
};
static struct s3c2410_platform_i2c s5p6440_i2c0_data __initdata = {
s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
}
+static void s5p6440_set_lcd_interface(void)
+{
+ unsigned int cfg;
+
+ /* select TFT LCD type (RGB I/F) */
+ cfg = __raw_readl(S5P64X0_SPCON0);
+ cfg &= ~S5P64X0_SPCON0_LCD_SEL_MASK;
+ cfg |= S5P64X0_SPCON0_LCD_SEL_RGB;
+ __raw_writel(cfg, S5P64X0_SPCON0);
+}
+
static void __init smdk6440_machine_init(void)
{
s3c24xx_ts_set_platdata(NULL);
samsung_bl_set(&smdk6440_bl_gpio_info, &smdk6440_bl_data);
+ s5p6440_set_lcd_interface();
+ s3c_fb_set_platdata(&smdk6440_lcd_pdata);
+
platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices));
}
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/pwm_backlight.h>
+#include <linux/fb.h>
+
+#include <video/platform_lcd.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/ts.h>
#include <plat/s5p-time.h>
#include <plat/backlight.h>
+#include <plat/fb.h>
+#include <plat/regs-fb.h>
#define SMDK6450_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
#endif
};
+/* Frame Buffer */
+static struct s3c_fb_pd_win smdk6450_fb_win0 = {
+ .win_mode = {
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 24,
+};
+
+static struct s3c_fb_platdata smdk6450_lcd_pdata __initdata = {
+ .win[0] = &smdk6450_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .setup_gpio = s5p64x0_fb_gpio_setup_24bpp,
+};
+
+/* LCD power controller */
+static void smdk6450_lte480_reset_power(struct plat_lcd_data *pd,
+ unsigned int power)
+{
+ int err;
+
+ if (power) {
+ err = gpio_request(S5P6450_GPN(5), "GPN");
+ if (err) {
+ printk(KERN_ERR "failed to request GPN for lcd reset\n");
+ return;
+ }
+
+ gpio_direction_output(S5P6450_GPN(5), 1);
+ gpio_set_value(S5P6450_GPN(5), 0);
+ gpio_set_value(S5P6450_GPN(5), 1);
+ gpio_free(S5P6450_GPN(5));
+ }
+}
+
+static struct plat_lcd_data smdk6450_lcd_power_data = {
+ .set_power = smdk6450_lte480_reset_power,
+};
+
+static struct platform_device smdk6450_lcd_lte480wv = {
+ .name = "platform-lcd",
+ .dev.parent = &s3c_device_fb.dev,
+ .dev.platform_data = &smdk6450_lcd_power_data,
+};
+
static struct platform_device *smdk6450_devices[] __initdata = {
&s3c_device_adc,
&s3c_device_rtc,
&s3c_device_wdt,
&samsung_asoc_dma,
&s5p6450_device_iis0,
+ &s3c_device_fb,
+ &smdk6450_lcd_lte480wv,
+
/* s5p6450_device_spi0 will be added */
};
s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
}
+static void s5p6450_set_lcd_interface(void)
+{
+ unsigned int cfg;
+
+ /* select TFT LCD type (RGB I/F) */
+ cfg = __raw_readl(S5P64X0_SPCON0);
+ cfg &= ~S5P64X0_SPCON0_LCD_SEL_MASK;
+ cfg |= S5P64X0_SPCON0_LCD_SEL_RGB;
+ __raw_writel(cfg, S5P64X0_SPCON0);
+}
+
static void __init smdk6450_machine_init(void)
{
s3c24xx_ts_set_platdata(NULL);
samsung_bl_set(&smdk6450_bl_gpio_info, &smdk6450_bl_data);
+ s5p6450_set_lcd_interface();
+ s3c_fb_set_platdata(&smdk6450_lcd_pdata);
+
platform_add_devices(smdk6450_devices, ARRAY_SIZE(smdk6450_devices));
}
--- /dev/null
+/* linux/arch/arm/mach-s5p64x0/pm.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5P64X0 Power Management Support
+ *
+ * Based on arch/arm/mach-s3c64xx/pm.c by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/suspend.h>
+#include <linux/syscore_ops.h>
+#include <linux/io.h>
+
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/regs-timer.h>
+#include <plat/wakeup-mask.h>
+
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+
+static struct sleep_save s5p64x0_core_save[] = {
+ SAVE_ITEM(S5P64X0_APLL_CON),
+ SAVE_ITEM(S5P64X0_MPLL_CON),
+ SAVE_ITEM(S5P64X0_EPLL_CON),
+ SAVE_ITEM(S5P64X0_EPLL_CON_K),
+ SAVE_ITEM(S5P64X0_CLK_SRC0),
+ SAVE_ITEM(S5P64X0_CLK_SRC1),
+ SAVE_ITEM(S5P64X0_CLK_DIV0),
+ SAVE_ITEM(S5P64X0_CLK_DIV1),
+ SAVE_ITEM(S5P64X0_CLK_DIV2),
+ SAVE_ITEM(S5P64X0_CLK_DIV3),
+ SAVE_ITEM(S5P64X0_CLK_GATE_MEM0),
+ SAVE_ITEM(S5P64X0_CLK_GATE_HCLK1),
+ SAVE_ITEM(S5P64X0_CLK_GATE_SCLK1),
+};
+
+static struct sleep_save s5p64x0_misc_save[] = {
+ SAVE_ITEM(S5P64X0_AHB_CON0),
+ SAVE_ITEM(S5P64X0_SPCON0),
+ SAVE_ITEM(S5P64X0_SPCON1),
+ SAVE_ITEM(S5P64X0_MEM0CONSLP0),
+ SAVE_ITEM(S5P64X0_MEM0CONSLP1),
+ SAVE_ITEM(S5P64X0_MEM0DRVCON),
+ SAVE_ITEM(S5P64X0_MEM1DRVCON),
+
+ SAVE_ITEM(S3C64XX_TINT_CSTAT),
+};
+
+/* DPLL is present only in S5P6450 */
+static struct sleep_save s5p6450_core_save[] = {
+ SAVE_ITEM(S5P6450_DPLL_CON),
+ SAVE_ITEM(S5P6450_DPLL_CON_K),
+};
+
+void s3c_pm_configure_extint(void)
+{
+ __raw_writel(s3c_irqwake_eintmask, S5P64X0_EINT_WAKEUP_MASK);
+}
+
+void s3c_pm_restore_core(void)
+{
+ __raw_writel(0, S5P64X0_EINT_WAKEUP_MASK);
+
+ s3c_pm_do_restore_core(s5p64x0_core_save,
+ ARRAY_SIZE(s5p64x0_core_save));
+
+ if (soc_is_s5p6450())
+ s3c_pm_do_restore_core(s5p6450_core_save,
+ ARRAY_SIZE(s5p6450_core_save));
+
+ s3c_pm_do_restore(s5p64x0_misc_save, ARRAY_SIZE(s5p64x0_misc_save));
+}
+
+void s3c_pm_save_core(void)
+{
+ s3c_pm_do_save(s5p64x0_misc_save, ARRAY_SIZE(s5p64x0_misc_save));
+
+ if (soc_is_s5p6450())
+ s3c_pm_do_save(s5p6450_core_save,
+ ARRAY_SIZE(s5p6450_core_save));
+
+ s3c_pm_do_save(s5p64x0_core_save, ARRAY_SIZE(s5p64x0_core_save));
+}
+
+static int s5p64x0_cpu_suspend(unsigned long arg)
+{
+ unsigned long tmp = 0;
+
+ /*
+ * Issue the standby signal into the pm unit. Note, we
+ * issue a write-buffer drain just in case.
+ */
+ asm("b 1f\n\t"
+ ".align 5\n\t"
+ "1:\n\t"
+ "mcr p15, 0, %0, c7, c10, 5\n\t"
+ "mcr p15, 0, %0, c7, c10, 4\n\t"
+ "mcr p15, 0, %0, c7, c0, 4" : : "r" (tmp));
+
+ /* we should never get past here */
+ panic("sleep resumed to originator?");
+}
+
+/* mapping of interrupts to parts of the wakeup mask */
+static struct samsung_wakeup_mask s5p64x0_wake_irqs[] = {
+ { .irq = IRQ_RTC_ALARM, .bit = S5P64X0_PWR_CFG_RTC_ALRM_DISABLE, },
+ { .irq = IRQ_RTC_TIC, .bit = S5P64X0_PWR_CFG_RTC_TICK_DISABLE, },
+ { .irq = IRQ_HSMMC0, .bit = S5P64X0_PWR_CFG_MMC0_DISABLE, },
+ { .irq = IRQ_HSMMC1, .bit = S5P64X0_PWR_CFG_MMC1_DISABLE, },
+};
+
+static void s5p64x0_pm_prepare(void)
+{
+ u32 tmp;
+
+ samsung_sync_wakemask(S5P64X0_PWR_CFG,
+ s5p64x0_wake_irqs, ARRAY_SIZE(s5p64x0_wake_irqs));
+
+ /* store the resume address in INFORM0 register */
+ __raw_writel(virt_to_phys(s3c_cpu_resume), S5P64X0_INFORM0);
+
+ /* setup clock gating for FIMGVG block */
+ __raw_writel((__raw_readl(S5P64X0_CLK_GATE_HCLK1) | \
+ (S5P64X0_CLK_GATE_HCLK1_FIMGVG)), S5P64X0_CLK_GATE_HCLK1);
+ __raw_writel((__raw_readl(S5P64X0_CLK_GATE_SCLK1) | \
+ (S5P64X0_CLK_GATE_SCLK1_FIMGVG)), S5P64X0_CLK_GATE_SCLK1);
+
+ /* Configure the stabilization counter with wait time required */
+ __raw_writel(S5P64X0_PWR_STABLE_PWR_CNT_VAL4, S5P64X0_PWR_STABLE);
+
+ /* set WFI to SLEEP mode configuration */
+ tmp = __raw_readl(S5P64X0_SLEEP_CFG);
+ tmp &= ~(S5P64X0_SLEEP_CFG_OSC_EN);
+ __raw_writel(tmp, S5P64X0_SLEEP_CFG);
+
+ tmp = __raw_readl(S5P64X0_PWR_CFG);
+ tmp &= ~(S5P64X0_PWR_CFG_WFI_MASK);
+ tmp |= S5P64X0_PWR_CFG_WFI_SLEEP;
+ __raw_writel(tmp, S5P64X0_PWR_CFG);
+
+ /*
+ * set OTHERS register to disable interrupt before going to
+ * sleep. This bit is present only in S5P6450, it is reserved
+ * in S5P6440.
+ */
+ if (soc_is_s5p6450()) {
+ tmp = __raw_readl(S5P64X0_OTHERS);
+ tmp |= S5P6450_OTHERS_DISABLE_INT;
+ __raw_writel(tmp, S5P64X0_OTHERS);
+ }
+
+ /* ensure previous wakeup state is cleared before sleeping */
+ __raw_writel(__raw_readl(S5P64X0_WAKEUP_STAT), S5P64X0_WAKEUP_STAT);
+
+}
+
+static int s5p64x0_pm_add(struct sys_device *sysdev)
+{
+ pm_cpu_prep = s5p64x0_pm_prepare;
+ pm_cpu_sleep = s5p64x0_cpu_suspend;
+ pm_uart_udivslot = 1;
+
+ return 0;
+}
+
+static struct sysdev_driver s5p64x0_pm_driver = {
+ .add = s5p64x0_pm_add,
+};
+
+static __init int s5p64x0_pm_drvinit(void)
+{
+ s3c_pm_init();
+
+ return sysdev_driver_register(&s5p64x0_sysclass, &s5p64x0_pm_driver);
+}
+arch_initcall(s5p64x0_pm_drvinit);
+
+static void s5p64x0_pm_resume(void)
+{
+ u32 tmp;
+
+ tmp = __raw_readl(S5P64X0_OTHERS);
+ tmp |= (S5P64X0_OTHERS_RET_MMC0 | S5P64X0_OTHERS_RET_MMC1 | \
+ S5P64X0_OTHERS_RET_UART);
+ __raw_writel(tmp , S5P64X0_OTHERS);
+}
+
+static struct syscore_ops s5p64x0_pm_syscore_ops = {
+ .resume = s5p64x0_pm_resume,
+};
+
+static __init int s5p64x0_pm_syscore_init(void)
+{
+ register_syscore_ops(&s5p64x0_pm_syscore_ops);
+
+ return 0;
+}
+arch_initcall(s5p64x0_pm_syscore_init);
--- /dev/null
+/* linux/arch/arm/mach-s5p64x0/setup-fb-24bpp.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Base S5P64X0 GPIO setup information for LCD framebuffer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/fb.h>
+#include <linux/gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+
+void s5p64x0_fb_gpio_setup_24bpp(void)
+{
+ if (soc_is_s5p6440()) {
+ s3c_gpio_cfgrange_nopull(S5P6440_GPI(0), 16, S3C_GPIO_SFN(2));
+ s3c_gpio_cfgrange_nopull(S5P6440_GPJ(0), 12, S3C_GPIO_SFN(2));
+ } else if (soc_is_s5p6450()) {
+ s3c_gpio_cfgrange_nopull(S5P6450_GPI(0), 16, S3C_GPIO_SFN(2));
+ s3c_gpio_cfgrange_nopull(S5P6450_GPJ(0), 12, S3C_GPIO_SFN(2));
+ }
+}
.ctrlbit = (1 << 2),
}, {
.name = "dma",
- .devname = "s3c-pl330.1",
+ .devname = "dma-pl330.1",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_0_ctrl,
.ctrlbit = (1 << 1),
}, {
.name = "dma",
- .devname = "s3c-pl330.0",
+ .devname = "dma-pl330.0",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_0_ctrl,
.ctrlbit = (1 << 0),
static int __init s5pc100_dma_init(void)
{
amba_device_register(&s5pc100_device_pdma0, &iomem_resource);
+ amba_device_register(&s5pc100_device_pdma1, &iomem_resource);
return 0;
}
+++ /dev/null
-#ifndef __MACH_CLKDEV_H__
-#define __MACH_CLKDEV_H__
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do {} while (0)
-
-#endif
+++ /dev/null
-/* linux/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - pwm clock and timer support
- *
- * Based on mach-s3c6400/include/mach/pwm-clock.h
- */
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
- return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
- return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
- return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
- return ilog2(div);
-}
-
-#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
* published by the Free Software Foundation.
*/
-#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
[2] = "sclk_mmc", /* mmc_bus */
/* [3] = "48m", - note not successfully used yet */
};
-
-
-void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
- void __iomem *r,
- struct mmc_ios *ios,
- struct mmc_card *card)
-{
- u32 ctrl2, ctrl3;
-
- /* don't need to alter anything according to card-type */
-
- writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
-
- ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
- ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
- ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
- S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
- S3C_SDHCI_CTRL2_ENFBCLKRX |
- S3C_SDHCI_CTRL2_DFCNT_NONE |
- S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
- if (ios->clock < 25 * 1000000)
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
- S3C_SDHCI_CTRL3_FCSEL2 |
- S3C_SDHCI_CTRL3_FCSEL1 |
- S3C_SDHCI_CTRL3_FCSEL0);
- else
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
- writel(ctrl2, r + S3C_SDHCI_CONTROL2);
- writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
select SAMSUNG_DMADEV
select S5P_EXT_INT
select S5P_HRT
+ select S5P_PM if PM
+ select S5P_SLEEP if PM
help
Enable S5PV210 CPU support
select S3C_DEV_USB_HSOTG
select S5P_DEV_ONENAND
select SAMSUNG_DEV_KEYPAD
+ select S5P_DEV_TV
select S5PV210_SETUP_FB_24BPP
select S5PV210_SETUP_I2C1
select S5PV210_SETUP_I2C2
select S5PV210_SETUP_KEYPAD
select S5PV210_SETUP_SDHCI
+ select S5PV210_SETUP_FIMC
help
Machine support for Samsung GONI board
S5PC110(MCP) is one of package option of S5PV210
obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o dma.o
obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o
-obj-$(CONFIG_PM) += pm.o sleep.o
+obj-$(CONFIG_PM) += pm.o
# machine support
return s5p_gatectrl(S5P_CLK_SRC_MASK1, clk, enable);
}
+static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
+}
+
+static int exynos4_clk_dac_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable);
+}
+
static struct clk clk_sclk_hdmi27m = {
.name = "sclk_hdmi27m",
.rate = 27000000,
static struct clk init_clocks_off[] = {
{
.name = "dma",
- .devname = "s3c-pl330.0",
+ .devname = "dma-pl330.0",
.parent = &clk_hclk_psys.clk,
.enable = s5pv210_clk_ip0_ctrl,
.ctrlbit = (1 << 3),
}, {
.name = "dma",
- .devname = "s3c-pl330.1",
+ .devname = "dma-pl330.1",
.parent = &clk_hclk_psys.clk,
.enable = s5pv210_clk_ip0_ctrl,
.ctrlbit = (1 << 4),
.parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip0_ctrl,
.ctrlbit = (1 << 16),
+ }, {
+ .name = "dac",
+ .devname = "s5p-sdo",
+ .parent = &clk_hclk_dsys.clk,
+ .enable = s5pv210_clk_ip1_ctrl,
+ .ctrlbit = (1 << 10),
+ }, {
+ .name = "mixer",
+ .devname = "s5p-mixer",
+ .parent = &clk_hclk_dsys.clk,
+ .enable = s5pv210_clk_ip1_ctrl,
+ .ctrlbit = (1 << 9),
+ }, {
+ .name = "vp",
+ .devname = "s5p-mixer",
+ .parent = &clk_hclk_dsys.clk,
+ .enable = s5pv210_clk_ip1_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "hdmi",
+ .devname = "s5pv210-hdmi",
+ .parent = &clk_hclk_dsys.clk,
+ .enable = s5pv210_clk_ip1_ctrl,
+ .ctrlbit = (1 << 11),
+ }, {
+ .name = "hdmiphy",
+ .devname = "s5pv210-hdmi",
+ .enable = exynos4_clk_hdmiphy_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "dacphy",
+ .devname = "s5p-sdo",
+ .enable = exynos4_clk_dac_ctrl,
+ .ctrlbit = (1 << 0),
}, {
.name = "otg",
.parent = &clk_hclk_psys.clk,
.parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1<<9),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-hdmiphy-i2c",
+ .parent = &clk_pclk_psys.clk,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1 << 11),
}, {
.name = "spi",
.devname = "s3c64xx-spi.0",
.nr_sources = ARRAY_SIZE(clkset_sclk_mixer_list),
};
+static struct clksrc_clk clk_sclk_mixer = {
+ .clk = {
+ .name = "sclk_mixer",
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 1),
+ },
+ .sources = &clkset_sclk_mixer,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 },
+};
+
+static struct clksrc_clk *sclk_tv[] = {
+ &clk_sclk_dac,
+ &clk_sclk_pixel,
+ &clk_sclk_hdmi,
+ &clk_sclk_mixer,
+};
+
static struct clk *clkset_sclk_audio0_list[] = {
[0] = &clk_ext_xtal_mux,
[1] = &clk_pcmcdclk0,
.sources = &clkset_uart,
.reg_src = { .reg = S5P_CLK_SRC4, .shift = 28, .size = 4 },
.reg_div = { .reg = S5P_CLK_DIV4, .shift = 28, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_mixer",
- .enable = s5pv210_clk_mask0_ctrl,
- .ctrlbit = (1 << 1),
- },
- .sources = &clkset_sclk_mixer,
- .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 },
}, {
.clk = {
.name = "sclk_fimc",
&clk_pclk_psys,
&clk_vpllsrc,
&clk_sclk_vpll,
- &clk_sclk_dac,
- &clk_sclk_pixel,
- &clk_sclk_hdmi,
&clk_mout_dmc0,
&clk_sclk_dmc0,
&clk_sclk_audio0,
.get_rate = s5p_epll_get_rate,
};
+static u32 vpll_div[][5] = {
+ { 54000000, 3, 53, 3, 0 },
+ { 108000000, 3, 53, 2, 0 },
+};
+
+static unsigned long s5pv210_vpll_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+
+static int s5pv210_vpll_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned int vpll_con;
+ unsigned int i;
+
+ /* Return if nothing changed */
+ if (clk->rate == rate)
+ return 0;
+
+ vpll_con = __raw_readl(S5P_VPLL_CON);
+ vpll_con &= ~(0x1 << 27 | \
+ PLL90XX_MDIV_MASK << PLL90XX_MDIV_SHIFT | \
+ PLL90XX_PDIV_MASK << PLL90XX_PDIV_SHIFT | \
+ PLL90XX_SDIV_MASK << PLL90XX_SDIV_SHIFT);
+
+ for (i = 0; i < ARRAY_SIZE(vpll_div); i++) {
+ if (vpll_div[i][0] == rate) {
+ vpll_con |= vpll_div[i][1] << PLL90XX_PDIV_SHIFT;
+ vpll_con |= vpll_div[i][2] << PLL90XX_MDIV_SHIFT;
+ vpll_con |= vpll_div[i][3] << PLL90XX_SDIV_SHIFT;
+ vpll_con |= vpll_div[i][4] << 27;
+ break;
+ }
+ }
+
+ if (i == ARRAY_SIZE(vpll_div)) {
+ printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ __raw_writel(vpll_con, S5P_VPLL_CON);
+
+ /* Wait for VPLL lock */
+ while (!(__raw_readl(S5P_VPLL_CON) & (1 << PLL90XX_LOCKED_SHIFT)))
+ continue;
+
+ clk->rate = rate;
+ return 0;
+}
+static struct clk_ops s5pv210_vpll_ops = {
+ .get_rate = s5pv210_vpll_get_rate,
+ .set_rate = s5pv210_vpll_set_rate,
+};
+
void __init_or_cpufreq s5pv210_setup_clocks(void)
{
struct clk *xtal_clk;
clk_fout_apll.ops = &clk_fout_apll_ops;
clk_fout_mpll.rate = mpll;
clk_fout_epll.rate = epll;
+ clk_fout_vpll.ops = &s5pv210_vpll_ops;
clk_fout_vpll.rate = vpll;
printk(KERN_INFO "S5PV210: PLL settings, A=%ld, M=%ld, E=%ld V=%ld",
for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
s3c_register_clksrc(sysclks[ptr], 1);
+ for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++)
+ s3c_register_clksrc(sclk_tv[ptr], 1);
+
s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
#include <plat/keypad-core.h>
#include <plat/sdhci.h>
#include <plat/reset.h>
+#include <plat/tv-core.h>
/* Initial IO mappings */
/* Use s5pv210-keypad instead of samsung-keypad */
samsung_keypad_setname("s5pv210-keypad");
+
+ /* setup TV devices */
+ s5p_hdmi_setname("s5pv210-hdmi");
}
void __init s5pv210_init_clocks(int xtal)
static int __init s5pv210_dma_init(void)
{
amba_device_register(&s5pv210_device_pdma0, &iomem_resource);
+ amba_device_register(&s5pv210_device_pdma1, &iomem_resource);
return 0;
}
+++ /dev/null
-#ifndef __MACH_CLKDEV_H__
-#define __MACH_CLKDEV_H__
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do {} while (0)
-
-#endif
#define IRQ_SPI2 S5P_IRQ_VIC1(17)
#define IRQ_IRDA S5P_IRQ_VIC1(18)
#define IRQ_IIC2 S5P_IRQ_VIC1(19)
-#define IRQ_IIC3 S5P_IRQ_VIC1(20)
+#define IRQ_IIC_HDMIPHY S5P_IRQ_VIC1(20)
#define IRQ_HSIRX S5P_IRQ_VIC1(21)
#define IRQ_HSITX S5P_IRQ_VIC1(22)
#define IRQ_UHOST S5P_IRQ_VIC1(23)
#define IRQ_HDMI S5P_IRQ_VIC2(12)
#define IRQ_IIC1 S5P_IRQ_VIC2(13)
#define IRQ_MFC S5P_IRQ_VIC2(14)
-#define IRQ_TVENC S5P_IRQ_VIC2(15)
+#define IRQ_SDO S5P_IRQ_VIC2(15)
#define IRQ_I2S0 S5P_IRQ_VIC2(16)
#define IRQ_I2S1 S5P_IRQ_VIC2(17)
#define IRQ_I2S2 S5P_IRQ_VIC2(18)
#define S5PV210_PA_FIMC1 0xFB300000
#define S5PV210_PA_FIMC2 0xFB400000
+#define S5PV210_PA_SDO 0xF9000000
+#define S5PV210_PA_VP 0xF9100000
+#define S5PV210_PA_MIXER 0xF9200000
+#define S5PV210_PA_HDMI 0xFA100000
+#define S5PV210_PA_IIC_HDMIPHY 0xFA900000
+
/* Compatibiltiy Defines */
#define S3C_PA_FB S5PV210_PA_FB
#define S5P_PA_FIMC2 S5PV210_PA_FIMC2
#define S5P_PA_MIPI_CSIS0 S5PV210_PA_MIPI_CSIS
#define S5P_PA_MFC S5PV210_PA_MFC
+#define S5P_PA_IIC_HDMIPHY S5PV210_PA_IIC_HDMIPHY
+
+#define S5P_PA_SDO S5PV210_PA_SDO
+#define S5P_PA_VP S5PV210_PA_VP
+#define S5P_PA_MIXER S5PV210_PA_MIXER
+#define S5P_PA_HDMI S5PV210_PA_HDMI
+
#define S5P_PA_ONENAND S5PC110_PA_ONENAND
#define S5P_PA_ONENAND_DMA S5PC110_PA_ONENAND_DMA
#define S5P_PA_SDRAM S5PV210_PA_SDRAM
}
static inline void s3c_pm_restored_gpios(void) { }
-static inline void s3c_pm_saved_gpios(void) { }
+static inline void samsung_pm_saved_gpios(void) { }
+++ /dev/null
-/* linux/arch/arm/mach-s5pv210/include/mach/pwm-clock.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
- *
- * S5PV210 - pwm clock and timer support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_PWMCLK_H
-#define __ASM_ARCH_PWMCLK_H __FILE__
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
- return tcfg == S3C64XX_TCFG1_MUX_TCLK;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
- return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
- return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
- return ilog2(div);
-}
-
-#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
-
-#endif /* __ASM_ARCH_PWMCLK_H */
#define S5P_OTHERS S5P_CLKREG(0xE000)
#define S5P_OM_STAT S5P_CLKREG(0xE100)
+#define S5P_HDMI_PHY_CONTROL S5P_CLKREG(0xE804)
#define S5P_USB_PHY_CONTROL S5P_CLKREG(0xE80C)
-#define S5P_DAC_CONTROL S5P_CLKREG(0xE810)
+#define S5P_DAC_PHY_CONTROL S5P_CLKREG(0xE810)
#define S5P_MIPI_DPHY_CONTROL(x) S5P_CLKREG(0xE814)
#define S5P_MIPI_DPHY_ENABLE (1 << 0)
#define S5P_MIPI_DPHY_SRESETN (1 << 1)
#include <plat/s5p-time.h>
#include <plat/mfc.h>
#include <plat/regs-fb-v4.h>
+#include <plat/camport.h>
+
+#include <media/v4l2-mediabus.h>
+#include <media/s5p_fimc.h>
+#include <media/noon010pc30.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
i2c2_devs[0].irq = gpio_to_irq(gpio);
}
+static void goni_camera_init(void)
+{
+ s5pv210_fimc_setup_gpio(S5P_CAMPORT_A);
+
+ /* Set max driver strength on CAM_A_CLKOUT pin. */
+ s5p_gpio_set_drvstr(S5PV210_GPE1(3), S5P_GPIO_DRVSTR_LV4);
+}
+
/* MAX8998 regulators */
#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
static struct regulator_consumer_supply goni_ldo8_consumers[] = {
REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"),
+ REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"),
};
static struct regulator_consumer_supply goni_ldo11_consumers[] = {
static struct regulator_consumer_supply buck2_consumer =
REGULATOR_SUPPLY("vddint", NULL);
+static struct regulator_consumer_supply buck3_consumer =
+ REGULATOR_SUPPLY("vdet", "s5p-sdo");
+
+
static struct regulator_init_data goni_buck1_data = {
.constraints = {
.name = "VARM_1.2V",
.enabled = 1,
},
},
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &buck3_consumer,
};
static struct regulator_init_data goni_buck4_data = {
s3c_sdhci2_set_platdata(&goni_hsmmc2_data);
};
+static struct noon010pc30_platform_data noon010pc30_pldata = {
+ .clk_rate = 16000000UL,
+ .gpio_nreset = S5PV210_GPB(2), /* CAM_CIF_NRST */
+ .gpio_nstby = S5PV210_GPB(0), /* CAM_CIF_NSTBY */
+};
+
+static struct i2c_board_info noon010pc30_board_info = {
+ I2C_BOARD_INFO("NOON010PC30", 0x60 >> 1),
+ .platform_data = &noon010pc30_pldata,
+};
+
+static struct s5p_fimc_isp_info goni_camera_sensors[] = {
+ {
+ .mux_id = 0,
+ .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
+ V4L2_MBUS_VSYNC_ACTIVE_LOW,
+ .bus_type = FIMC_ITU_601,
+ .board_info = &noon010pc30_board_info,
+ .i2c_bus_num = 0,
+ .clk_frequency = 16000000UL,
+ },
+};
+
+struct s5p_platform_fimc goni_fimc_md_platdata __initdata = {
+ .isp_info = goni_camera_sensors,
+ .num_clients = ARRAY_SIZE(goni_camera_sensors),
+};
+
static struct platform_device *goni_devices[] __initdata = {
&s3c_device_fb,
&s5p_device_onenand,
&s5p_device_mfc,
&s5p_device_mfc_l,
&s5p_device_mfc_r,
+ &s5p_device_mixer,
+ &s5p_device_sdo,
&s3c_device_i2c0,
&s5p_device_fimc0,
&s5p_device_fimc1,
&s5p_device_fimc2,
+ &s5p_device_fimc_md,
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
&s3c_device_hsmmc2,
/* FB */
s3c_fb_set_platdata(&goni_lcd_pdata);
+ /* FIMC */
+ s3c_set_platdata(&goni_fimc_md_platdata, sizeof(goni_fimc_md_platdata),
+ &s5p_device_fimc_md);
+
+ goni_camera_init();
+
/* SPI */
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
* published by the Free Software Foundation.
*/
-#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
[2] = "sclk_mmc", /* mmc_bus */
/* [3] = NULL, - reserved */
};
-
-void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
- void __iomem *r,
- struct mmc_ios *ios,
- struct mmc_card *card)
-{
- u32 ctrl2, ctrl3;
-
- /* don't need to alter anything according to card-type */
-
- writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
-
- ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
- ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
- ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
- S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
- S3C_SDHCI_CTRL2_ENFBCLKRX |
- S3C_SDHCI_CTRL2_DFCNT_NONE |
- S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
- if (ios->clock < 25 * 1000000)
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
- S3C_SDHCI_CTRL3_FCSEL2 |
- S3C_SDHCI_CTRL3_FCSEL1 |
- S3C_SDHCI_CTRL3_FCSEL0);
- else
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
- writel(ctrl2, r + S3C_SDHCI_CONTROL2);
- writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
+++ /dev/null
-/* linux/arch/arm/plat-s5p/sleep.S
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5PV210 power Manager (Suspend-To-RAM) support
- * Based on S3C2410 sleep code by:
- * Ben Dooks, (c) 2004 Simtec Electronics
- *
- * Based on PXA/SA1100 sleep code by:
- * Nicolas Pitre, (c) 2002 Monta Vista Software Inc
- * Cliff Brake, (c) 2001
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/memory.h>
-
- .text
-
- /* sleep magic, to allow the bootloader to check for an valid
- * image to resume to. Must be the first word before the
- * s3c_cpu_resume entry.
- */
-
- .word 0x2bedf00d
-
- /* s3c_cpu_resume
- *
- * resume code entry for bootloader to call
- *
- * we must put this code here in the data segment as we have no
- * other way of restoring the stack pointer after sleep, and we
- * must not write to the code segment (code is read-only)
- */
-
-ENTRY(s3c_cpu_resume)
- b cpu_resume
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
+#include <asm/page.h>
#include <asm/setup.h>
#include <mach/collie.h>
#include <mach/hardware.h>
#include <asm/hardware/sa1111.h>
#include <asm/irq.h>
+#include <asm/page.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
#include <asm/mach/arch.h>
select SH_CLK_CPG
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
+ select I2C
comment "SH-Mobile Board Type"
depends on ARCH_SH7372
select ARCH_REQUIRE_GPIOLIB
+config MACH_KOTA2
+ bool "KOTA2 board"
+ select ARCH_REQUIRE_GPIOLIB
+ depends on ARCH_SH73A0
+
comment "SH-Mobile System Configuration"
menu "Memory configuration"
default "0x50000000" if MACH_G3EVM
default "0x40000000" if MACH_G4EVM || MACH_AP4EVB || MACH_AG5EVM || \
MACH_MACKEREL
+ default "0x41000000" if MACH_KOTA2
default "0x00000000"
---help---
Tweak this only when porting to a new machine which does not
default "0x08000000" if MACH_G3EVM
default "0x08000000" if MACH_G4EVM
default "0x20000000" if MACH_AG5EVM
+ default "0x1e000000" if MACH_KOTA2
default "0x10000000" if MACH_AP4EVB || MACH_MACKEREL
default "0x04000000"
help
#
# Common objects
-obj-y := timer.o console.o clock.o pm_runtime.o
+obj-y := timer.o console.o clock.o
# CPU objects
obj-$(CONFIG_ARCH_SH7367) += setup-sh7367.o clock-sh7367.o intc-sh7367.o
obj-$(CONFIG_MACH_AP4EVB) += board-ap4evb.o
obj-$(CONFIG_MACH_AG5EVM) += board-ag5evm.o
obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o
+obj-$(CONFIG_MACH_KOTA2) += board-kota2.o
# Framework support
obj-$(CONFIG_SMP) += $(smp-y)
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gic_spi(33), /* PINT1 */
+ .start = SH73A0_PINT0_IRQ(2), /* PINTA2 */
.flags = IORESOURCE_IRQ,
},
};
},
};
+/* SDHI0 */
+static irqreturn_t ag5evm_sdhi0_gpio_cd(int irq, void *arg)
+{
+ struct device *dev = arg;
+ struct sh_mobile_sdhi_info *info = dev->platform_data;
+ struct tmio_mmc_data *pdata = info->pdata;
+
+ tmio_mmc_cd_wakeup(pdata);
+
+ return IRQ_HANDLED;
+}
+
static struct sh_mobile_sdhi_info sdhi0_info = {
.dma_slave_tx = SHDMA_SLAVE_SDHI0_TX,
.dma_slave_rx = SHDMA_SLAVE_SDHI0_RX,
shmobile_setup_console();
}
-#define PINTC_ADDR 0xe6900000
-#define PINTER0A (PINTC_ADDR + 0xa0)
-#define PINTCR0A (PINTC_ADDR + 0xb0)
-
-void __init ag5evm_init_irq(void)
-{
- sh73a0_init_irq();
-
- /* setup PINT: enable PINTA2 as active low */
- __raw_writel(__raw_readl(PINTER0A) | (1<<29), PINTER0A);
- __raw_writew(__raw_readw(PINTCR0A) | (2<<10), PINTCR0A);
-}
-
#define DSI0PHYCR 0xe615006c
static void __init ag5evm_init(void)
/* enable MMCIF */
gpio_request(GPIO_FN_MMCCLK0, NULL);
gpio_request(GPIO_FN_MMCCMD0_PU, NULL);
- gpio_request(GPIO_FN_MMCD0_0, NULL);
- gpio_request(GPIO_FN_MMCD0_1, NULL);
- gpio_request(GPIO_FN_MMCD0_2, NULL);
- gpio_request(GPIO_FN_MMCD0_3, NULL);
- gpio_request(GPIO_FN_MMCD0_4, NULL);
- gpio_request(GPIO_FN_MMCD0_5, NULL);
- gpio_request(GPIO_FN_MMCD0_6, NULL);
- gpio_request(GPIO_FN_MMCD0_7, NULL);
+ gpio_request(GPIO_FN_MMCD0_0_PU, NULL);
+ gpio_request(GPIO_FN_MMCD0_1_PU, NULL);
+ gpio_request(GPIO_FN_MMCD0_2_PU, NULL);
+ gpio_request(GPIO_FN_MMCD0_3_PU, NULL);
+ gpio_request(GPIO_FN_MMCD0_4_PU, NULL);
+ gpio_request(GPIO_FN_MMCD0_5_PU, NULL);
+ gpio_request(GPIO_FN_MMCD0_6_PU, NULL);
+ gpio_request(GPIO_FN_MMCD0_7_PU, NULL);
gpio_request(GPIO_PORT208, NULL); /* Reset */
gpio_direction_output(GPIO_PORT208, 1);
gpio_request(GPIO_FN_SDHID0_1, NULL);
gpio_request(GPIO_FN_SDHID0_0, NULL);
+ if (!request_irq(intcs_evt2irq(0x3c0), ag5evm_sdhi0_gpio_cd,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "sdhi0 cd", &sdhi0_device.dev))
+ sdhi0_info.tmio_flags |= TMIO_MMC_HAS_COLD_CD;
+ else
+ pr_warn("Unable to setup SDHI0 GPIO IRQ\n");
+
/* enable SDHI1 on CN4 [WLAN I/F] */
gpio_request(GPIO_FN_SDHICLK1, NULL);
gpio_request(GPIO_FN_SDHICMD1_PU, NULL);
MACHINE_START(AG5EVM, "ag5evm")
.map_io = ag5evm_map_io,
- .init_irq = ag5evm_init_irq,
+ .init_irq = sh73a0_init_irq,
.handle_irq = shmobile_handle_irq_gic,
.init_machine = ag5evm_init,
.timer = &ag5evm_timer,
static struct resource nor_flash_resources[] = {
[0] = {
- .start = 0x00000000,
- .end = 0x08000000 - 1,
+ .start = 0x20000000, /* CS0 shadow instead of regular CS0 */
+ .end = 0x28000000 - 1, /* needed by USB MASK ROM boot */
.flags = IORESOURCE_MEM,
}
};
--- /dev/null
+/*
+ * kota2 board support
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Copyright (C) 2011 Magnus Damm
+ * Copyright (C) 2010 Takashi Yoshii <yoshii.takashi.zj@renesas.com>
+ * Copyright (C) 2009 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/smsc911x.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+#include <linux/gpio_keys.h>
+#include <linux/leds.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
+#include <mach/hardware.h>
+#include <mach/sh73a0.h>
+#include <mach/common.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/hardware/gic.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/traps.h>
+
+/* SMSC 9220 */
+static struct resource smsc9220_resources[] = {
+ [0] = {
+ .start = 0x14000000, /* CS5A */
+ .end = 0x140000ff, /* A1->A7 */
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gic_spi(33), /* PINTA2 @ PORT144 */
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct smsc911x_platform_config smsc9220_platdata = {
+ .flags = SMSC911X_USE_32BIT, /* 32-bit SW on 16-bit HW bus */
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device eth_device = {
+ .name = "smsc911x",
+ .id = 0,
+ .dev = {
+ .platform_data = &smsc9220_platdata,
+ },
+ .resource = smsc9220_resources,
+ .num_resources = ARRAY_SIZE(smsc9220_resources),
+};
+
+/* KEYSC */
+static struct sh_keysc_info keysc_platdata = {
+ .mode = SH_KEYSC_MODE_6,
+ .scan_timing = 3,
+ .delay = 100,
+ .keycodes = {
+ KEY_NUMERIC_STAR, KEY_NUMERIC_0, KEY_NUMERIC_POUND,
+ 0, 0, 0, 0, 0,
+ KEY_NUMERIC_7, KEY_NUMERIC_8, KEY_NUMERIC_9,
+ 0, KEY_DOWN, 0, 0, 0,
+ KEY_NUMERIC_4, KEY_NUMERIC_5, KEY_NUMERIC_6,
+ KEY_LEFT, KEY_ENTER, KEY_RIGHT, 0, 0,
+ KEY_NUMERIC_1, KEY_NUMERIC_2, KEY_NUMERIC_3,
+ 0, KEY_UP, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ },
+};
+
+static struct resource keysc_resources[] = {
+ [0] = {
+ .name = "KEYSC",
+ .start = 0xe61b0000,
+ .end = 0xe61b0098 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gic_spi(71),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device keysc_device = {
+ .name = "sh_keysc",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(keysc_resources),
+ .resource = keysc_resources,
+ .dev = {
+ .platform_data = &keysc_platdata,
+ },
+};
+
+/* GPIO KEY */
+#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
+
+static struct gpio_keys_button gpio_buttons[] = {
+ GPIO_KEY(KEY_VOLUMEUP, GPIO_PORT56, "+"), /* S2: VOL+ [IRQ9] */
+ GPIO_KEY(KEY_VOLUMEDOWN, GPIO_PORT54, "-"), /* S3: VOL- [IRQ10] */
+ GPIO_KEY(KEY_MENU, GPIO_PORT27, "Menu"), /* S4: MENU [IRQ30] */
+ GPIO_KEY(KEY_HOMEPAGE, GPIO_PORT26, "Home"), /* S5: HOME [IRQ31] */
+ GPIO_KEY(KEY_BACK, GPIO_PORT11, "Back"), /* S6: BACK [IRQ0] */
+ GPIO_KEY(KEY_PHONE, GPIO_PORT238, "Tel"), /* S7: TEL [IRQ11] */
+ GPIO_KEY(KEY_POWER, GPIO_PORT239, "C1"), /* S8: CAM [IRQ13] */
+ GPIO_KEY(KEY_MAIL, GPIO_PORT224, "Mail"), /* S9: MAIL [IRQ3] */
+ /* Omitted button "C3?": GPIO_PORT223 - S10: CUST [IRQ8] */
+ GPIO_KEY(KEY_CAMERA, GPIO_PORT164, "C2"), /* S11: CAM_HALF [IRQ25] */
+ /* Omitted button "?": GPIO_PORT152 - S12: CAM_FULL [No IRQ] */
+};
+
+static struct gpio_keys_platform_data gpio_key_info = {
+ .buttons = gpio_buttons,
+ .nbuttons = ARRAY_SIZE(gpio_buttons),
+ .poll_interval = 250, /* polled for now */
+};
+
+static struct platform_device gpio_keys_device = {
+ .name = "gpio-keys-polled", /* polled for now */
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_key_info,
+ },
+};
+
+/* GPIO LED */
+#define GPIO_LED(n, g) { .name = n, .gpio = g }
+
+static struct gpio_led gpio_leds[] = {
+ GPIO_LED("V2513", GPIO_PORT153), /* PORT153 [TPU1T02] -> V2513 */
+ GPIO_LED("V2514", GPIO_PORT199), /* PORT199 [TPU4TO1] -> V2514 */
+ GPIO_LED("V2515", GPIO_PORT197), /* PORT197 [TPU2TO1] -> V2515 */
+ GPIO_LED("KEYLED", GPIO_PORT163), /* PORT163 [TPU3TO0] -> KEYLED */
+ GPIO_LED("G", GPIO_PORT20), /* PORT20 [GPO0] -> LED7 -> "G" */
+ GPIO_LED("H", GPIO_PORT21), /* PORT21 [GPO1] -> LED8 -> "H" */
+ GPIO_LED("J", GPIO_PORT22), /* PORT22 [GPO2] -> LED9 -> "J" */
+};
+
+static struct gpio_led_platform_data gpio_leds_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device gpio_leds_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_leds_info,
+ },
+};
+
+/* MMCIF */
+static struct resource mmcif_resources[] = {
+ [0] = {
+ .name = "MMCIF",
+ .start = 0xe6bd0000,
+ .end = 0xe6bd00ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gic_spi(140),
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = gic_spi(141),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct sh_mmcif_plat_data mmcif_info = {
+ .ocr = MMC_VDD_165_195,
+ .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
+};
+
+static struct platform_device mmcif_device = {
+ .name = "sh_mmcif",
+ .id = 0,
+ .dev = {
+ .platform_data = &mmcif_info,
+ },
+ .num_resources = ARRAY_SIZE(mmcif_resources),
+ .resource = mmcif_resources,
+};
+
+/* SDHI0 */
+static struct sh_mobile_sdhi_info sdhi0_info = {
+ .tmio_caps = MMC_CAP_SD_HIGHSPEED,
+ .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
+};
+
+static struct resource sdhi0_resources[] = {
+ [0] = {
+ .name = "SDHI0",
+ .start = 0xee100000,
+ .end = 0xee1000ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gic_spi(83),
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = gic_spi(84),
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .start = gic_spi(85),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sdhi0_device = {
+ .name = "sh_mobile_sdhi",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(sdhi0_resources),
+ .resource = sdhi0_resources,
+ .dev = {
+ .platform_data = &sdhi0_info,
+ },
+};
+
+/* SDHI1 */
+static struct sh_mobile_sdhi_info sdhi1_info = {
+ .tmio_caps = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
+ .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
+};
+
+static struct resource sdhi1_resources[] = {
+ [0] = {
+ .name = "SDHI1",
+ .start = 0xee120000,
+ .end = 0xee1200ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gic_spi(87),
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = gic_spi(88),
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .start = gic_spi(89),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sdhi1_device = {
+ .name = "sh_mobile_sdhi",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(sdhi1_resources),
+ .resource = sdhi1_resources,
+ .dev = {
+ .platform_data = &sdhi1_info,
+ },
+};
+
+static struct platform_device *kota2_devices[] __initdata = {
+ ð_device,
+ &keysc_device,
+ &gpio_keys_device,
+ &gpio_leds_device,
+ &mmcif_device,
+ &sdhi0_device,
+ &sdhi1_device,
+};
+
+static struct map_desc kota2_io_desc[] __initdata = {
+ /* create a 1:1 entity map for 0xe6xxxxxx
+ * used by CPGA, INTC and PFC.
+ */
+ {
+ .virtual = 0xe6000000,
+ .pfn = __phys_to_pfn(0xe6000000),
+ .length = 256 << 20,
+ .type = MT_DEVICE_NONSHARED
+ },
+};
+
+static void __init kota2_map_io(void)
+{
+ iotable_init(kota2_io_desc, ARRAY_SIZE(kota2_io_desc));
+
+ /* setup early devices and console here as well */
+ sh73a0_add_early_devices();
+ shmobile_setup_console();
+}
+
+#define PINTER0A 0xe69000a0
+#define PINTCR0A 0xe69000b0
+
+void __init kota2_init_irq(void)
+{
+ sh73a0_init_irq();
+
+ /* setup PINT: enable PINTA2 as active low */
+ __raw_writel(1 << 29, PINTER0A);
+ __raw_writew(2 << 10, PINTCR0A);
+}
+
+static void __init kota2_init(void)
+{
+ sh73a0_pinmux_init();
+
+ /* SCIFA2 (UART2) */
+ gpio_request(GPIO_FN_SCIFA2_TXD1, NULL);
+ gpio_request(GPIO_FN_SCIFA2_RXD1, NULL);
+ gpio_request(GPIO_FN_SCIFA2_RTS1_, NULL);
+ gpio_request(GPIO_FN_SCIFA2_CTS1_, NULL);
+
+ /* SCIFA4 (UART1) */
+ gpio_request(GPIO_FN_SCIFA4_TXD, NULL);
+ gpio_request(GPIO_FN_SCIFA4_RXD, NULL);
+ gpio_request(GPIO_FN_SCIFA4_RTS_, NULL);
+ gpio_request(GPIO_FN_SCIFA4_CTS_, NULL);
+
+ /* SMSC911X */
+ gpio_request(GPIO_FN_D0_NAF0, NULL);
+ gpio_request(GPIO_FN_D1_NAF1, NULL);
+ gpio_request(GPIO_FN_D2_NAF2, NULL);
+ gpio_request(GPIO_FN_D3_NAF3, NULL);
+ gpio_request(GPIO_FN_D4_NAF4, NULL);
+ gpio_request(GPIO_FN_D5_NAF5, NULL);
+ gpio_request(GPIO_FN_D6_NAF6, NULL);
+ gpio_request(GPIO_FN_D7_NAF7, NULL);
+ gpio_request(GPIO_FN_D8_NAF8, NULL);
+ gpio_request(GPIO_FN_D9_NAF9, NULL);
+ gpio_request(GPIO_FN_D10_NAF10, NULL);
+ gpio_request(GPIO_FN_D11_NAF11, NULL);
+ gpio_request(GPIO_FN_D12_NAF12, NULL);
+ gpio_request(GPIO_FN_D13_NAF13, NULL);
+ gpio_request(GPIO_FN_D14_NAF14, NULL);
+ gpio_request(GPIO_FN_D15_NAF15, NULL);
+ gpio_request(GPIO_FN_CS5A_, NULL);
+ gpio_request(GPIO_FN_WE0__FWE, NULL);
+ gpio_request(GPIO_PORT144, NULL); /* PINTA2 */
+ gpio_direction_input(GPIO_PORT144);
+ gpio_request(GPIO_PORT145, NULL); /* RESET */
+ gpio_direction_output(GPIO_PORT145, 1);
+
+ /* KEYSC */
+ gpio_request(GPIO_FN_KEYIN0_PU, NULL);
+ gpio_request(GPIO_FN_KEYIN1_PU, NULL);
+ gpio_request(GPIO_FN_KEYIN2_PU, NULL);
+ gpio_request(GPIO_FN_KEYIN3_PU, NULL);
+ gpio_request(GPIO_FN_KEYIN4_PU, NULL);
+ gpio_request(GPIO_FN_KEYIN5_PU, NULL);
+ gpio_request(GPIO_FN_KEYIN6_PU, NULL);
+ gpio_request(GPIO_FN_KEYIN7_PU, NULL);
+ gpio_request(GPIO_FN_KEYOUT0, NULL);
+ gpio_request(GPIO_FN_KEYOUT1, NULL);
+ gpio_request(GPIO_FN_KEYOUT2, NULL);
+ gpio_request(GPIO_FN_KEYOUT3, NULL);
+ gpio_request(GPIO_FN_KEYOUT4, NULL);
+ gpio_request(GPIO_FN_KEYOUT5, NULL);
+ gpio_request(GPIO_FN_PORT59_KEYOUT6, NULL);
+ gpio_request(GPIO_FN_PORT58_KEYOUT7, NULL);
+ gpio_request(GPIO_FN_KEYOUT8, NULL);
+
+ /* MMCIF */
+ gpio_request(GPIO_FN_MMCCLK0, NULL);
+ gpio_request(GPIO_FN_MMCD0_0, NULL);
+ gpio_request(GPIO_FN_MMCD0_1, NULL);
+ gpio_request(GPIO_FN_MMCD0_2, NULL);
+ gpio_request(GPIO_FN_MMCD0_3, NULL);
+ gpio_request(GPIO_FN_MMCD0_4, NULL);
+ gpio_request(GPIO_FN_MMCD0_5, NULL);
+ gpio_request(GPIO_FN_MMCD0_6, NULL);
+ gpio_request(GPIO_FN_MMCD0_7, NULL);
+ gpio_request(GPIO_FN_MMCCMD0, NULL);
+ gpio_request(GPIO_PORT208, NULL); /* Reset */
+ gpio_direction_output(GPIO_PORT208, 1);
+
+ /* SDHI0 (microSD) */
+ gpio_request(GPIO_FN_SDHICD0_PU, NULL);
+ gpio_request(GPIO_FN_SDHICMD0_PU, NULL);
+ gpio_request(GPIO_FN_SDHICLK0, NULL);
+ gpio_request(GPIO_FN_SDHID0_3_PU, NULL);
+ gpio_request(GPIO_FN_SDHID0_2_PU, NULL);
+ gpio_request(GPIO_FN_SDHID0_1_PU, NULL);
+ gpio_request(GPIO_FN_SDHID0_0_PU, NULL);
+
+ /* SCIFB (BT) */
+ gpio_request(GPIO_FN_PORT159_SCIFB_SCK, NULL);
+ gpio_request(GPIO_FN_PORT160_SCIFB_TXD, NULL);
+ gpio_request(GPIO_FN_PORT161_SCIFB_CTS_, NULL);
+ gpio_request(GPIO_FN_PORT162_SCIFB_RXD, NULL);
+ gpio_request(GPIO_FN_PORT163_SCIFB_RTS_, NULL);
+
+ /* SDHI1 (BCM4330) */
+ gpio_request(GPIO_FN_SDHICLK1, NULL);
+ gpio_request(GPIO_FN_SDHICMD1_PU, NULL);
+ gpio_request(GPIO_FN_SDHID1_3_PU, NULL);
+ gpio_request(GPIO_FN_SDHID1_2_PU, NULL);
+ gpio_request(GPIO_FN_SDHID1_1_PU, NULL);
+ gpio_request(GPIO_FN_SDHID1_0_PU, NULL);
+
+#ifdef CONFIG_CACHE_L2X0
+ /* Early BRESP enable, Shared attribute override enable, 64K*8way */
+ l2x0_init(__io(0xf0100000), 0x40460000, 0x82000fff);
+#endif
+ sh73a0_add_standard_devices();
+ platform_add_devices(kota2_devices, ARRAY_SIZE(kota2_devices));
+}
+
+static void __init kota2_timer_init(void)
+{
+ sh73a0_clock_init();
+ shmobile_timer.init();
+ return;
+}
+
+struct sys_timer kota2_timer = {
+ .init = kota2_timer_init,
+};
+
+MACHINE_START(KOTA2, "kota2")
+ .map_io = kota2_map_io,
+ .init_irq = kota2_init_irq,
+ .handle_irq = shmobile_handle_irq_gic,
+ .init_machine = kota2_init,
+ .timer = &kota2_timer,
+MACHINE_END
static struct resource nor_flash_resources[] = {
[0] = {
- .start = 0x00000000,
- .end = 0x08000000 - 1,
+ .start = 0x20000000, /* CS0 shadow instead of regular CS0 */
+ .end = 0x28000000 - 1, /* needed by USB MASK ROM boot */
.flags = IORESOURCE_MEM,
}
};
.disable = fsidiv_disable,
};
-static struct clk_mapping sh7372_fsidiva_clk_mapping = {
+static struct clk_mapping fsidiva_clk_mapping = {
.phys = FSIDIVA,
.len = 8,
};
struct clk sh7372_fsidiva_clk = {
.ops = &fsidiv_clk_ops,
.parent = &div6_reparent_clks[DIV6_FSIA], /* late install */
- .mapping = &sh7372_fsidiva_clk_mapping,
+ .mapping = &fsidiva_clk_mapping,
};
-static struct clk_mapping sh7372_fsidivb_clk_mapping = {
+static struct clk_mapping fsidivb_clk_mapping = {
.phys = FSIDIVB,
.len = 8,
};
struct clk sh7372_fsidivb_clk = {
.ops = &fsidiv_clk_ops,
.parent = &div6_reparent_clks[DIV6_FSIB], /* late install */
- .mapping = &sh7372_fsidivb_clk_mapping,
+ .mapping = &fsidivb_clk_mapping,
};
static struct clk *late_main_clks[] = {
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sh_clk.h>
+#include <linux/export.h>
int __init clk_init(void)
{
};
static int shmobile_cpuidle_enter(struct cpuidle_device *dev,
- struct cpuidle_state *state)
+ struct cpuidle_driver *drv,
+ int index)
{
ktime_t before, after;
- int requested_state = state - &dev->states[0];
- dev->last_state = &dev->states[requested_state];
before = ktime_get();
local_irq_disable();
local_fiq_disable();
- shmobile_cpuidle_modes[requested_state]();
+ shmobile_cpuidle_modes[index]();
local_irq_enable();
local_fiq_enable();
after = ktime_get();
- return ktime_to_ns(ktime_sub(after, before)) >> 10;
+ dev->last_residency = ktime_to_ns(ktime_sub(after, before)) >> 10;
+
+ return index;
}
static struct cpuidle_device shmobile_cpuidle_dev;
static struct cpuidle_driver shmobile_cpuidle_driver = {
.name = "shmobile_cpuidle",
.owner = THIS_MODULE,
+ .states[0] = {
+ .name = "C1",
+ .desc = "WFI",
+ .exit_latency = 1,
+ .target_residency = 1 * 2,
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ },
+ .safe_state_index = 0, /* C1 */
+ .state_count = 1,
};
-void (*shmobile_cpuidle_setup)(struct cpuidle_device *dev);
+void (*shmobile_cpuidle_setup)(struct cpuidle_driver *drv);
static int shmobile_cpuidle_init(void)
{
struct cpuidle_device *dev = &shmobile_cpuidle_dev;
- struct cpuidle_state *state;
+ struct cpuidle_driver *drv = &shmobile_cpuidle_driver;
int i;
- cpuidle_register_driver(&shmobile_cpuidle_driver);
-
- for (i = 0; i < CPUIDLE_STATE_MAX; i++) {
- dev->states[i].name[0] = '\0';
- dev->states[i].desc[0] = '\0';
- dev->states[i].enter = shmobile_cpuidle_enter;
- }
-
- i = CPUIDLE_DRIVER_STATE_START;
-
- state = &dev->states[i++];
- snprintf(state->name, CPUIDLE_NAME_LEN, "C1");
- strncpy(state->desc, "WFI", CPUIDLE_DESC_LEN);
- state->exit_latency = 1;
- state->target_residency = 1 * 2;
- state->power_usage = 3;
- state->flags = 0;
- state->flags |= CPUIDLE_FLAG_TIME_VALID;
-
- dev->safe_state = state;
- dev->state_count = i;
+ for (i = 0; i < CPUIDLE_STATE_MAX; i++)
+ drv->states[i].enter = shmobile_cpuidle_enter;
if (shmobile_cpuidle_setup)
- shmobile_cpuidle_setup(dev);
+ shmobile_cpuidle_setup(drv);
+
+ cpuidle_register_driver(drv);
+ dev->state_count = drv->state_count;
cpuidle_register_device(dev);
return 0;
extern void shmobile_handle_irq_intc(struct pt_regs *);
extern void shmobile_handle_irq_gic(struct pt_regs *);
extern struct platform_suspend_ops shmobile_suspend_ops;
-struct cpuidle_device;
+struct cpuidle_driver;
extern void (*shmobile_cpuidle_modes[])(void);
-extern void (*shmobile_cpuidle_setup)(struct cpuidle_device *dev);
+extern void (*shmobile_cpuidle_setup)(struct cpuidle_driver *drv);
extern void sh7367_init_irq(void);
extern void sh7367_add_early_devices(void);
--- /dev/null
+#ifndef __ASM_MACH_INTC_H
+#define __ASM_MACH_INTC_H
+#include <linux/sh_intc.h>
+
+#define INTC_IRQ_PINS_ENUM_16L(p) \
+ p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \
+ p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7, \
+ p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \
+ p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15
+
+#define INTC_IRQ_PINS_ENUM_16H(p) \
+ p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \
+ p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23, \
+ p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \
+ p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31
+
+#define INTC_IRQ_PINS_VECT_16L(p, vect) \
+ vect(p ## _IRQ0, 0x0200), vect(p ## _IRQ1, 0x0220), \
+ vect(p ## _IRQ2, 0x0240), vect(p ## _IRQ3, 0x0260), \
+ vect(p ## _IRQ4, 0x0280), vect(p ## _IRQ5, 0x02a0), \
+ vect(p ## _IRQ6, 0x02c0), vect(p ## _IRQ7, 0x02e0), \
+ vect(p ## _IRQ8, 0x0300), vect(p ## _IRQ9, 0x0320), \
+ vect(p ## _IRQ10, 0x0340), vect(p ## _IRQ11, 0x0360), \
+ vect(p ## _IRQ12, 0x0380), vect(p ## _IRQ13, 0x03a0), \
+ vect(p ## _IRQ14, 0x03c0), vect(p ## _IRQ15, 0x03e0)
+
+#define INTC_IRQ_PINS_VECT_16H(p, vect) \
+ vect(p ## _IRQ16, 0x3200), vect(p ## _IRQ17, 0x3220), \
+ vect(p ## _IRQ18, 0x3240), vect(p ## _IRQ19, 0x3260), \
+ vect(p ## _IRQ20, 0x3280), vect(p ## _IRQ21, 0x32a0), \
+ vect(p ## _IRQ22, 0x32c0), vect(p ## _IRQ23, 0x32e0), \
+ vect(p ## _IRQ24, 0x3300), vect(p ## _IRQ25, 0x3320), \
+ vect(p ## _IRQ26, 0x3340), vect(p ## _IRQ27, 0x3360), \
+ vect(p ## _IRQ28, 0x3380), vect(p ## _IRQ29, 0x33a0), \
+ vect(p ## _IRQ30, 0x33c0), vect(p ## _IRQ31, 0x33e0)
+
+#define INTC_IRQ_PINS_MASK_16L(p, base) \
+ { base + 0x40, base + 0x60, 8, /* INTMSK00A / INTMSKCLR00A */ \
+ { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \
+ p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \
+ { base + 0x44, base + 0x64, 8, /* INTMSK10A / INTMSKCLR10A */ \
+ { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \
+ p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
+
+#define INTC_IRQ_PINS_MASK_16H(p, base) \
+ { base + 0x48, base + 0x68, 8, /* INTMSK20A / INTMSKCLR20A */ \
+ { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \
+ p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \
+ { base + 0x4c, base + 0x6c, 8, /* INTMSK30A / INTMSKCLR30A */ \
+ { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \
+ p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
+
+#define INTC_IRQ_PINS_PRIO_16L(p, base) \
+ { base + 0x10, 0, 32, 4, /* INTPRI00A */ \
+ { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \
+ p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \
+ { base + 0x14, 0, 32, 4, /* INTPRI10A */ \
+ { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \
+ p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
+
+#define INTC_IRQ_PINS_PRIO_16H(p, base) \
+ { base + 0x18, 0, 32, 4, /* INTPRI20A */ \
+ { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \
+ p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \
+ { base + 0x1c, 0, 32, 4, /* INTPRI30A */ \
+ { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \
+ p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
+
+#define INTC_IRQ_PINS_SENSE_16L(p, base) \
+ { base + 0x00, 32, 4, /* ICR1A */ \
+ { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \
+ p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \
+ { base + 0x04, 32, 4, /* ICR2A */ \
+ { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \
+ p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
+
+#define INTC_IRQ_PINS_SENSE_16H(p, base) \
+ { base + 0x08, 32, 4, /* ICR3A */ \
+ { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \
+ p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \
+ { base + 0x0c, 32, 4, /* ICR4A */ \
+ { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \
+ p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
+
+#define INTC_IRQ_PINS_ACK_16L(p, base) \
+ { base + 0x20, 0, 8, /* INTREQ00A */ \
+ { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \
+ p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \
+ { base + 0x24, 0, 8, /* INTREQ10A */ \
+ { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \
+ p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
+
+#define INTC_IRQ_PINS_ACK_16H(p, base) \
+ { base + 0x28, 0, 8, /* INTREQ20A */ \
+ { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \
+ p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \
+ { base + 0x2c, 0, 8, /* INTREQ30A */ \
+ { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \
+ p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
+
+#define INTC_IRQ_PINS_16(p, base, vect, str) \
+ \
+static struct resource p ## _resources[] __initdata = { \
+ [0] = { \
+ .start = base, \
+ .end = base + 0x64, \
+ .flags = IORESOURCE_MEM, \
+ }, \
+}; \
+ \
+enum { \
+ p ## _UNUSED = 0, \
+ INTC_IRQ_PINS_ENUM_16L(p), \
+}; \
+ \
+static struct intc_vect p ## _vectors[] __initdata = { \
+ INTC_IRQ_PINS_VECT_16L(p, vect), \
+}; \
+ \
+static struct intc_mask_reg p ## _mask_registers[] __initdata = { \
+ INTC_IRQ_PINS_MASK_16L(p, base), \
+}; \
+ \
+static struct intc_prio_reg p ## _prio_registers[] __initdata = { \
+ INTC_IRQ_PINS_PRIO_16L(p, base), \
+}; \
+ \
+static struct intc_sense_reg p ## _sense_registers[] __initdata = { \
+ INTC_IRQ_PINS_SENSE_16L(p, base), \
+}; \
+ \
+static struct intc_mask_reg p ## _ack_registers[] __initdata = { \
+ INTC_IRQ_PINS_ACK_16L(p, base), \
+}; \
+ \
+static struct intc_desc p ## _desc __initdata = { \
+ .name = str, \
+ .resource = p ## _resources, \
+ .num_resources = ARRAY_SIZE(p ## _resources), \
+ .hw = INTC_HW_DESC(p ## _vectors, NULL, \
+ p ## _mask_registers, p ## _prio_registers, \
+ p ## _sense_registers, p ## _ack_registers) \
+}
+
+#define INTC_IRQ_PINS_32(p, base, vect, str) \
+ \
+static struct resource p ## _resources[] __initdata = { \
+ [0] = { \
+ .start = base, \
+ .end = base + 0x6c, \
+ .flags = IORESOURCE_MEM, \
+ }, \
+}; \
+ \
+enum { \
+ p ## _UNUSED = 0, \
+ INTC_IRQ_PINS_ENUM_16L(p), \
+ INTC_IRQ_PINS_ENUM_16H(p), \
+}; \
+ \
+static struct intc_vect p ## _vectors[] __initdata = { \
+ INTC_IRQ_PINS_VECT_16L(p, vect), \
+ INTC_IRQ_PINS_VECT_16H(p, vect), \
+}; \
+ \
+static struct intc_mask_reg p ## _mask_registers[] __initdata = { \
+ INTC_IRQ_PINS_MASK_16L(p, base), \
+ INTC_IRQ_PINS_MASK_16H(p, base), \
+}; \
+ \
+static struct intc_prio_reg p ## _prio_registers[] __initdata = { \
+ INTC_IRQ_PINS_PRIO_16L(p, base), \
+ INTC_IRQ_PINS_PRIO_16H(p, base), \
+}; \
+ \
+static struct intc_sense_reg p ## _sense_registers[] __initdata = { \
+ INTC_IRQ_PINS_SENSE_16L(p, base), \
+ INTC_IRQ_PINS_SENSE_16H(p, base), \
+}; \
+ \
+static struct intc_mask_reg p ## _ack_registers[] __initdata = { \
+ INTC_IRQ_PINS_ACK_16L(p, base), \
+ INTC_IRQ_PINS_ACK_16H(p, base), \
+}; \
+ \
+static struct intc_desc p ## _desc __initdata = { \
+ .name = str, \
+ .resource = p ## _resources, \
+ .num_resources = ARRAY_SIZE(p ## _resources), \
+ .hw = INTC_HW_DESC(p ## _vectors, NULL, \
+ p ## _mask_registers, p ## _prio_registers, \
+ p ## _sense_registers, p ## _ack_registers) \
+}
+
+#define INTC_PINT_E_EMPTY
+#define INTC_PINT_E_NONE 0, 0, 0, 0, 0, 0, 0, 0,
+#define INTC_PINT_E(p) \
+ PINT ## p ## 0, PINT ## p ## 1, PINT ## p ## 2, PINT ## p ## 3, \
+ PINT ## p ## 4, PINT ## p ## 5, PINT ## p ## 6, PINT ## p ## 7,
+
+#define INTC_PINT_V_NONE
+#define INTC_PINT_V(p, vect) \
+ vect(PINT ## p ## 0, 0), vect(PINT ## p ## 1, 1), \
+ vect(PINT ## p ## 2, 2), vect(PINT ## p ## 3, 3), \
+ vect(PINT ## p ## 4, 4), vect(PINT ## p ## 5, 5), \
+ vect(PINT ## p ## 6, 6), vect(PINT ## p ## 7, 7),
+
+#define INTC_PINT(p, mask_reg, sense_base, str, \
+ enums_1, enums_2, enums_3, enums_4, \
+ vect_1, vect_2, vect_3, vect_4, \
+ mask_a, mask_b, mask_c, mask_d, \
+ sense_a, sense_b, sense_c, sense_d) \
+ \
+enum { \
+ PINT ## p ## _UNUSED = 0, \
+ enums_1 enums_2 enums_3 enums_4 \
+}; \
+ \
+static struct intc_vect p ## _vectors[] __initdata = { \
+ vect_1 vect_2 vect_3 vect_4 \
+}; \
+ \
+static struct intc_mask_reg p ## _mask_registers[] __initdata = { \
+ { mask_reg, 0, 32, /* PINTER */ \
+ { mask_a mask_b mask_c mask_d } } \
+}; \
+ \
+static struct intc_sense_reg p ## _sense_registers[] __initdata = { \
+ { sense_base + 0x00, 16, 2, /* PINTCR */ \
+ { sense_a } }, \
+ { sense_base + 0x04, 16, 2, /* PINTCR */ \
+ { sense_b } }, \
+ { sense_base + 0x08, 16, 2, /* PINTCR */ \
+ { sense_c } }, \
+ { sense_base + 0x0c, 16, 2, /* PINTCR */ \
+ { sense_d } }, \
+}; \
+ \
+static struct intc_desc p ## _desc __initdata = { \
+ .name = str, \
+ .hw = INTC_HW_DESC(p ## _vectors, NULL, \
+ p ## _mask_registers, NULL, \
+ p ## _sense_registers, NULL), \
+}
+
+#endif /* __ASM_MACH_INTC_H */
GPIO_FN_KEYIN5_PU,
GPIO_FN_KEYIN6_PU,
GPIO_FN_KEYIN7_PU,
+ GPIO_FN_SDHICD0_PU,
+ GPIO_FN_SDHID0_0_PU,
+ GPIO_FN_SDHID0_1_PU,
+ GPIO_FN_SDHID0_2_PU,
+ GPIO_FN_SDHID0_3_PU,
+ GPIO_FN_SDHICMD0_PU,
+ GPIO_FN_SDHIWP0_PU,
GPIO_FN_SDHID1_0_PU,
GPIO_FN_SDHID1_1_PU,
GPIO_FN_SDHID1_2_PU,
GPIO_FN_SDHID1_3_PU,
GPIO_FN_SDHICMD1_PU,
+ GPIO_FN_SDHID2_0_PU,
+ GPIO_FN_SDHID2_1_PU,
+ GPIO_FN_SDHID2_2_PU,
+ GPIO_FN_SDHID2_3_PU,
+ GPIO_FN_SDHICMD2_PU,
GPIO_FN_MMCCMD0_PU,
GPIO_FN_MMCCMD1_PU,
+ GPIO_FN_MMCD0_0_PU,
+ GPIO_FN_MMCD0_1_PU,
+ GPIO_FN_MMCD0_2_PU,
+ GPIO_FN_MMCD0_3_PU,
+ GPIO_FN_MMCD0_4_PU,
+ GPIO_FN_MMCD0_5_PU,
+ GPIO_FN_MMCD0_6_PU,
+ GPIO_FN_MMCD0_7_PU,
GPIO_FN_FSIACK_PU,
GPIO_FN_FSIAILR_PU,
GPIO_FN_FSIAIBT_PU,
GPIO_FN_FSIAISLD_PU,
};
+
/* DMA slave IDs */
enum {
SHDMA_SLAVE_INVALID,
SHDMA_SLAVE_MMCIF_RX,
};
+/* PINT interrupts are located at Linux IRQ 768 and up */
+#define SH73A0_PINT0_IRQ(irq) ((irq) + 768)
+#define SH73A0_PINT1_IRQ(irq) ((irq) + 800)
+
#endif /* __ASM_SH73A0_H__ */
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/sh_intc.h>
+#include <mach/intc.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
DISABLED,
/* interrupt sources INTCA */
- IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A,
- IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A,
DIRC,
CRYPT1_ERR, CRYPT2_STD,
IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1,
};
static struct intc_vect intca_vectors[] __initdata = {
- INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220),
- INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260),
- INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0),
- INTC_VECT(IRQ6A, 0x02c0), INTC_VECT(IRQ7A, 0x02e0),
- INTC_VECT(IRQ8A, 0x0300), INTC_VECT(IRQ9A, 0x0320),
- INTC_VECT(IRQ10A, 0x0340), INTC_VECT(IRQ11A, 0x0360),
- INTC_VECT(IRQ12A, 0x0380), INTC_VECT(IRQ13A, 0x03a0),
- INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0),
INTC_VECT(DIRC, 0x0560),
INTC_VECT(CRYPT1_ERR, 0x05e0),
INTC_VECT(CRYPT2_STD, 0x0700),
};
static struct intc_mask_reg intca_mask_registers[] __initdata = {
- { 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */
- { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
- { 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */
- { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
{ 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */
{ DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0,
ARM11_IRQPMU, 0, ARM11_COMMTX, ARM11_COMMRX } },
};
static struct intc_prio_reg intca_prio_registers[] __initdata = {
- { 0xe6900010, 0, 32, 4, /* INTPRI00A */
- { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
- { 0xe6900014, 0, 32, 4, /* INTPRI10A */
- { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
-
{ 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, LCRC } },
{ 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, ETM11, BBIF1, BBIF2 } },
{ 0xe6940008, 0, 16, 4, /* IPRCA */ { CRYPT1_ERR, CRYPT2_STD,
{ 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, SDHI2 } },
};
-static struct intc_sense_reg intca_sense_registers[] __initdata = {
- { 0xe6900000, 16, 2, /* ICR1A */
- { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
- { 0xe6900004, 16, 2, /* ICR2A */
- { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
-};
-
-static struct intc_mask_reg intca_ack_registers[] __initdata = {
- { 0xe6900020, 0, 8, /* INTREQ00A */
- { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
- { 0xe6900024, 0, 8, /* INTREQ10A */
- { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
-};
-
static struct intc_desc intca_desc __initdata = {
.name = "sh7367-intca",
.force_enable = ENABLED,
.force_disable = DISABLED,
.hw = INTC_HW_DESC(intca_vectors, intca_groups,
intca_mask_registers, intca_prio_registers,
- intca_sense_registers, intca_ack_registers),
+ NULL, NULL),
};
+INTC_IRQ_PINS_16(intca_irq_pins, 0xe6900000,
+ INTC_VECT, "sh7367-intca-irq-pins");
+
enum {
UNUSED_INTCS = 0,
void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
register_intc_controller(&intca_desc);
+ register_intc_controller(&intca_irq_pins_desc);
register_intc_controller(&intcs_desc);
/* demux using INTEVTSA */
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/sh_intc.h>
+#include <mach/intc.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
UNUSED_INTCA = 0,
/* interrupt sources INTCA */
- IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A,
- IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A,
- IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A,
- IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A,
DIRC,
CRYPT_STD,
IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1,
};
static struct intc_vect intca_vectors[] __initdata = {
- INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220),
- INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260),
- INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0),
- INTC_VECT(IRQ6A, 0x02c0), INTC_VECT(IRQ7A, 0x02e0),
- INTC_VECT(IRQ8A, 0x0300), INTC_VECT(IRQ9A, 0x0320),
- INTC_VECT(IRQ10A, 0x0340), INTC_VECT(IRQ11A, 0x0360),
- INTC_VECT(IRQ12A, 0x0380), INTC_VECT(IRQ13A, 0x03a0),
- INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0),
- INTC_VECT(IRQ16A, 0x3200), INTC_VECT(IRQ17A, 0x3220),
- INTC_VECT(IRQ18A, 0x3240), INTC_VECT(IRQ19A, 0x3260),
- INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ21A, 0x32a0),
- INTC_VECT(IRQ22A, 0x32c0), INTC_VECT(IRQ23A, 0x32e0),
- INTC_VECT(IRQ24A, 0x3300), INTC_VECT(IRQ25A, 0x3320),
- INTC_VECT(IRQ26A, 0x3340), INTC_VECT(IRQ27A, 0x3360),
- INTC_VECT(IRQ28A, 0x3380), INTC_VECT(IRQ29A, 0x33a0),
- INTC_VECT(IRQ30A, 0x33c0), INTC_VECT(IRQ31A, 0x33e0),
INTC_VECT(DIRC, 0x0560),
INTC_VECT(CRYPT_STD, 0x0700),
INTC_VECT(IIC1_ALI1, 0x0780), INTC_VECT(IIC1_TACKI1, 0x07a0),
};
static struct intc_mask_reg intca_mask_registers[] __initdata = {
- { 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */
- { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
- { 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */
- { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
- { 0xe6900048, 0xe6900068, 8, /* INTMSK20A / INTMSKCLR20A */
- { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
- { 0xe690004c, 0xe690006c, 8, /* INTMSK30A / INTMSKCLR30A */
- { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
-
{ 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */
{ DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0,
AP_ARM_IRQPMU, 0, AP_ARM_COMMTX, AP_ARM_COMMRX } },
};
static struct intc_prio_reg intca_prio_registers[] __initdata = {
- { 0xe6900010, 0, 32, 4, /* INTPRI00A */
- { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
- { 0xe6900014, 0, 32, 4, /* INTPRI10A */
- { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
- { 0xe6900018, 0, 32, 4, /* INTPRI20A */
- { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
- { 0xe690001c, 0, 32, 4, /* INTPRI30A */
- { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
-
{ 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, 0 } },
{ 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, 0, BBIF1, BBIF2 } },
{ 0xe6940008, 0, 16, 4, /* IPRCA */ { 0, CRYPT_STD,
{ 0xe6950050, 0, 16, 4, /* IPRUA3 */ { USBHSDMAC1_USHDMI, 0, 0, 0 } },
};
-static struct intc_sense_reg intca_sense_registers[] __initdata = {
- { 0xe6900000, 32, 4, /* ICR1A */
- { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
- { 0xe6900004, 32, 4, /* ICR2A */
- { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
- { 0xe6900008, 32, 4, /* ICR3A */
- { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
- { 0xe690000c, 32, 4, /* ICR4A */
- { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
-};
-
-static struct intc_mask_reg intca_ack_registers[] __initdata = {
- { 0xe6900020, 0, 8, /* INTREQ00A */
- { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
- { 0xe6900024, 0, 8, /* INTREQ10A */
- { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
- { 0xe6900028, 0, 8, /* INTREQ20A */
- { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
- { 0xe690002c, 0, 8, /* INTREQ30A */
- { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
-};
-
-static DECLARE_INTC_DESC_ACK(intca_desc, "sh7372-intca",
- intca_vectors, intca_groups,
- intca_mask_registers, intca_prio_registers,
- intca_sense_registers, intca_ack_registers);
+static DECLARE_INTC_DESC(intca_desc, "sh7372-intca",
+ intca_vectors, intca_groups,
+ intca_mask_registers, intca_prio_registers,
+ NULL);
+INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000,
+ INTC_VECT, "sh7372-intca-irq-pins");
enum {
UNUSED_INTCS = 0,
ENABLED_INTCS,
intcs_ffd5 = ioremap_nocache(0xffd50000, PAGE_SIZE);
register_intc_controller(&intca_desc);
+ register_intc_controller(&intca_irq_pins_desc);
register_intc_controller(&intcs_desc);
/* demux using INTEVTSA */
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/sh_intc.h>
+#include <mach/intc.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
DISABLED,
/* interrupt sources INTCA */
- IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A,
- IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A,
- IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A,
- IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A,
DIRC,
_2DG,
CRYPT_STD,
};
static struct intc_vect intca_vectors[] __initdata = {
- INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220),
- INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260),
- INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0),
- INTC_VECT(IRQ6A, 0x02c0), INTC_VECT(IRQ7A, 0x02e0),
- INTC_VECT(IRQ8A, 0x0300), INTC_VECT(IRQ9A, 0x0320),
- INTC_VECT(IRQ10A, 0x0340), INTC_VECT(IRQ11A, 0x0360),
- INTC_VECT(IRQ12A, 0x0380), INTC_VECT(IRQ13A, 0x03a0),
- INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0),
- INTC_VECT(IRQ16A, 0x3200), INTC_VECT(IRQ17A, 0x3220),
- INTC_VECT(IRQ18A, 0x3240), INTC_VECT(IRQ19A, 0x3260),
- INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ31A, 0x32a0),
- INTC_VECT(IRQ22A, 0x32c0), INTC_VECT(IRQ23A, 0x32e0),
- INTC_VECT(IRQ24A, 0x3300), INTC_VECT(IRQ25A, 0x3320),
- INTC_VECT(IRQ26A, 0x3340), INTC_VECT(IRQ27A, 0x3360),
- INTC_VECT(IRQ28A, 0x3380), INTC_VECT(IRQ29A, 0x33a0),
- INTC_VECT(IRQ30A, 0x33c0), INTC_VECT(IRQ31A, 0x33e0),
INTC_VECT(DIRC, 0x0560),
INTC_VECT(_2DG, 0x05e0),
INTC_VECT(CRYPT_STD, 0x0700),
};
static struct intc_mask_reg intca_mask_registers[] __initdata = {
- { 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */
- { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
- { 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */
- { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
- { 0xe6900048, 0xe6900068, 8, /* INTMSK20A / INTMSKCLR20A */
- { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
- { 0xe690004c, 0xe690006c, 8, /* INTMSK30A / INTMSKCLR30A */
- { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
-
{ 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */
{ DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0,
AP_ARM_IRQPMU, 0, AP_ARM_COMMTX, AP_ARM_COMMRX } },
};
static struct intc_prio_reg intca_prio_registers[] __initdata = {
- { 0xe6900010, 0, 32, 4, /* INTPRI00A */
- { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
- { 0xe6900014, 0, 32, 4, /* INTPRI10A */
- { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
- { 0xe6900018, 0, 32, 4, /* INTPRI10A */
- { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
- { 0xe690001c, 0, 32, 4, /* INTPRI30A */
- { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
-
{ 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, LCRC } },
{ 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, 0, BBIF1, BBIF2 } },
{ 0xe6940008, 0, 16, 4, /* IPRCA */ { _2DG, CRYPT_STD,
{ 0xe694003c, 0, 16, 4, /* IPRPA3 */ { SCIFA6, 0, 0, 0 } },
};
-static struct intc_sense_reg intca_sense_registers[] __initdata = {
- { 0xe6900000, 16, 2, /* ICR1A */
- { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
- { 0xe6900004, 16, 2, /* ICR2A */
- { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
- { 0xe6900008, 16, 2, /* ICR3A */
- { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
- { 0xe690000c, 16, 2, /* ICR4A */
- { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
-};
-
-static struct intc_mask_reg intca_ack_registers[] __initdata = {
- { 0xe6900020, 0, 8, /* INTREQ00A */
- { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
- { 0xe6900024, 0, 8, /* INTREQ10A */
- { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
- { 0xe6900028, 0, 8, /* INTREQ20A */
- { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
- { 0xe690002c, 0, 8, /* INTREQ30A */
- { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
-};
-
static struct intc_desc intca_desc __initdata = {
.name = "sh7377-intca",
.force_enable = ENABLED,
.force_disable = DISABLED,
.hw = INTC_HW_DESC(intca_vectors, intca_groups,
intca_mask_registers, intca_prio_registers,
- intca_sense_registers, intca_ack_registers),
+ NULL, NULL),
};
+INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000,
+ INTC_VECT, "sh7377-intca-irq-pins");
+
/* this macro ignore entry which is also in INTCA */
#define __IGNORE(a...)
#define __IGNORE0(a...) 0
void __iomem *intevtsa = ioremap_nocache(INTEVTSA, PAGE_SIZE);
register_intc_controller(&intca_desc);
+ register_intc_controller(&intca_irq_pins_desc);
register_intc_controller(&intcs_desc);
/* demux using INTEVTSA */
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/sh_intc.h>
+#include <mach/intc.h>
+#include <mach/sh73a0.h>
#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
return 0; /* always allow wakeup */
}
+#define RELOC_BASE 0x1000
+
+/* INTCA IRQ pins at INTCS + 0x1000 to make space for GIC+INTC handling */
+#define INTCS_VECT_RELOC(n, vect) INTCS_VECT((n), (vect) + RELOC_BASE)
+
+INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000,
+ INTCS_VECT_RELOC, "sh73a0-intca-irq-pins");
+
+static int to_gic_irq(struct irq_data *data)
+{
+ unsigned int vect = irq2evt(data->irq) - INTCS_VECT_BASE;
+
+ if (vect >= 0x3200)
+ vect -= 0x3000;
+ else
+ vect -= 0x0200;
+
+ return gic_spi((vect >> 5) + 1);
+}
+
+static int to_intca_reloc_irq(struct irq_data *data)
+{
+ return data->irq + (RELOC_BASE >> 5);
+}
+
+#define irq_cb(cb, irq) irq_get_chip(irq)->cb(irq_get_irq_data(irq))
+#define irq_cbp(cb, irq, p...) irq_get_chip(irq)->cb(irq_get_irq_data(irq), p)
+
+static void intca_gic_enable(struct irq_data *data)
+{
+ irq_cb(irq_unmask, to_intca_reloc_irq(data));
+ irq_cb(irq_unmask, to_gic_irq(data));
+}
+
+static void intca_gic_disable(struct irq_data *data)
+{
+ irq_cb(irq_mask, to_gic_irq(data));
+ irq_cb(irq_mask, to_intca_reloc_irq(data));
+}
+
+static void intca_gic_mask_ack(struct irq_data *data)
+{
+ irq_cb(irq_mask, to_gic_irq(data));
+ irq_cb(irq_mask_ack, to_intca_reloc_irq(data));
+}
+
+static void intca_gic_eoi(struct irq_data *data)
+{
+ irq_cb(irq_eoi, to_gic_irq(data));
+}
+
+static int intca_gic_set_type(struct irq_data *data, unsigned int type)
+{
+ return irq_cbp(irq_set_type, to_intca_reloc_irq(data), type);
+}
+
+static int intca_gic_set_wake(struct irq_data *data, unsigned int on)
+{
+ return irq_cbp(irq_set_wake, to_intca_reloc_irq(data), on);
+}
+
+#ifdef CONFIG_SMP
+static int intca_gic_set_affinity(struct irq_data *data,
+ const struct cpumask *cpumask,
+ bool force)
+{
+ return irq_cbp(irq_set_affinity, to_gic_irq(data), cpumask, force);
+}
+#endif
+
+struct irq_chip intca_gic_irq_chip = {
+ .name = "INTCA-GIC",
+ .irq_mask = intca_gic_disable,
+ .irq_unmask = intca_gic_enable,
+ .irq_mask_ack = intca_gic_mask_ack,
+ .irq_eoi = intca_gic_eoi,
+ .irq_enable = intca_gic_enable,
+ .irq_disable = intca_gic_disable,
+ .irq_shutdown = intca_gic_disable,
+ .irq_set_type = intca_gic_set_type,
+ .irq_set_wake = intca_gic_set_wake,
+#ifdef CONFIG_SMP
+ .irq_set_affinity = intca_gic_set_affinity,
+#endif
+};
+
+static int to_intc_vect(int irq)
+{
+ unsigned int irq_pin = irq - gic_spi(1);
+ unsigned int offs;
+
+ if (irq_pin < 16)
+ offs = 0x0200;
+ else
+ offs = 0x3000;
+
+ return offs + (irq_pin << 5);
+}
+
+static irqreturn_t sh73a0_irq_pin_demux(int irq, void *dev_id)
+{
+ generic_handle_irq(intcs_evt2irq(to_intc_vect(irq)));
+ return IRQ_HANDLED;
+}
+
+static struct irqaction sh73a0_irq_pin_cascade[32];
+
+#define PINTER0 0xe69000a0
+#define PINTER1 0xe69000a4
+#define PINTRR0 0xe69000d0
+#define PINTRR1 0xe69000d4
+
+#define PINT0A_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq))
+#define PINT0B_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq + 8))
+#define PINT0C_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq + 16))
+#define PINT0D_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq + 24))
+#define PINT1E_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT1_IRQ(irq))
+
+INTC_PINT(intc_pint0, PINTER0, 0xe69000b0, "sh73a0-pint0", \
+ INTC_PINT_E(A), INTC_PINT_E(B), INTC_PINT_E(C), INTC_PINT_E(D), \
+ INTC_PINT_V(A, PINT0A_IRQ), INTC_PINT_V(B, PINT0B_IRQ), \
+ INTC_PINT_V(C, PINT0C_IRQ), INTC_PINT_V(D, PINT0D_IRQ), \
+ INTC_PINT_E(A), INTC_PINT_E(B), INTC_PINT_E(C), INTC_PINT_E(D), \
+ INTC_PINT_E(A), INTC_PINT_E(B), INTC_PINT_E(C), INTC_PINT_E(D));
+
+INTC_PINT(intc_pint1, PINTER1, 0xe69000c0, "sh73a0-pint1", \
+ INTC_PINT_E(E), INTC_PINT_E_EMPTY, INTC_PINT_E_EMPTY, INTC_PINT_E_EMPTY, \
+ INTC_PINT_V(E, PINT1E_IRQ), INTC_PINT_V_NONE, \
+ INTC_PINT_V_NONE, INTC_PINT_V_NONE, \
+ INTC_PINT_E_NONE, INTC_PINT_E_NONE, INTC_PINT_E_NONE, INTC_PINT_E(E), \
+ INTC_PINT_E(E), INTC_PINT_E_NONE, INTC_PINT_E_NONE, INTC_PINT_E_NONE);
+
+static struct irqaction sh73a0_pint0_cascade;
+static struct irqaction sh73a0_pint1_cascade;
+
+static void pint_demux(unsigned long rr, unsigned long er, int base_irq)
+{
+ unsigned long value = ioread32(rr) & ioread32(er);
+ int k;
+
+ for (k = 0; k < 32; k++) {
+ if (value & (1 << (31 - k))) {
+ generic_handle_irq(base_irq + k);
+ iowrite32(~(1 << (31 - k)), rr);
+ }
+ }
+}
+
+static irqreturn_t sh73a0_pint0_demux(int irq, void *dev_id)
+{
+ pint_demux(PINTRR0, PINTER0, SH73A0_PINT0_IRQ(0));
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sh73a0_pint1_demux(int irq, void *dev_id)
+{
+ pint_demux(PINTRR1, PINTER1, SH73A0_PINT1_IRQ(0));
+ return IRQ_HANDLED;
+}
+
void __init sh73a0_init_irq(void)
{
void __iomem *gic_dist_base = __io(0xf0001000);
void __iomem *gic_cpu_base = __io(0xf0000100);
void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
+ int k, n;
gic_init(0, 29, gic_dist_base, gic_cpu_base);
gic_arch_extn.irq_set_wake = sh73a0_set_wake;
register_intc_controller(&intcs_desc);
+ register_intc_controller(&intca_irq_pins_desc);
+ register_intc_controller(&intc_pint0_desc);
+ register_intc_controller(&intc_pint1_desc);
/* demux using INTEVTSA */
sh73a0_intcs_cascade.name = "INTCS cascade";
sh73a0_intcs_cascade.handler = sh73a0_intcs_demux;
sh73a0_intcs_cascade.dev_id = intevtsa;
setup_irq(gic_spi(50), &sh73a0_intcs_cascade);
+
+ /* IRQ pins require special handling through INTCA and GIC */
+ for (k = 0; k < 32; k++) {
+ sh73a0_irq_pin_cascade[k].name = "INTCA-GIC cascade";
+ sh73a0_irq_pin_cascade[k].handler = sh73a0_irq_pin_demux;
+ setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]);
+
+ n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k)));
+ irq_set_chip_and_handler_name(n, &intca_gic_irq_chip,
+ handle_level_irq, "level");
+ set_irq_flags(n, IRQF_VALID); /* yuck */
+ }
+
+ /* PINT pins are sanely tied to the GIC as SPI */
+ sh73a0_pint0_cascade.name = "PINT0 cascade";
+ sh73a0_pint0_cascade.handler = sh73a0_pint0_demux;
+ setup_irq(gic_spi(33), &sh73a0_pint0_cascade);
+
+ sh73a0_pint1_cascade.name = "PINT1 cascade";
+ sh73a0_pint1_cascade.handler = sh73a0_pint1_demux;
+ setup_irq(gic_spi(34), &sh73a0_pint1_cascade);
}
#include <linux/gpio.h>
#include <mach/sh7367.h>
-#define _1(fn, pfx, sfx) fn(pfx, sfx)
-
-#define _10(fn, pfx, sfx) \
- _1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx), \
- _1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx), \
- _1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx), \
- _1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx), \
- _1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
-
-#define _90(fn, pfx, sfx) \
- _10(fn, pfx##1, sfx), _10(fn, pfx##2, sfx), \
- _10(fn, pfx##3, sfx), _10(fn, pfx##4, sfx), \
- _10(fn, pfx##5, sfx), _10(fn, pfx##6, sfx), \
- _10(fn, pfx##7, sfx), _10(fn, pfx##8, sfx), \
- _10(fn, pfx##9, sfx)
-
-#define _273(fn, pfx, sfx) \
- _10(fn, pfx, sfx), _90(fn, pfx, sfx), \
- _10(fn, pfx##10, sfx), _90(fn, pfx##1, sfx), \
- _10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx), \
- _10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx), \
- _10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx), \
- _10(fn, pfx##26, sfx), _1(fn, pfx##270, sfx), \
- _1(fn, pfx##271, sfx), _1(fn, pfx##272, sfx)
-
-#define _PORT(pfx, sfx) pfx##_##sfx
-#define PORT_273(str) _273(_PORT, PORT, str)
+#define CPU_ALL_PORT(fn, pfx, sfx) \
+ PORT_10(fn, pfx, sfx), PORT_90(fn, pfx, sfx), \
+ PORT_10(fn, pfx##10, sfx), PORT_90(fn, pfx##1, sfx), \
+ PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx), \
+ PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx), \
+ PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx), \
+ PORT_10(fn, pfx##26, sfx), PORT_1(fn, pfx##270, sfx), \
+ PORT_1(fn, pfx##271, sfx), PORT_1(fn, pfx##272, sfx)
enum {
PINMUX_RESERVED = 0,
PINMUX_DATA_BEGIN,
- PORT_273(DATA), /* PORT0_DATA -> PORT272_DATA */
+ PORT_ALL(DATA), /* PORT0_DATA -> PORT272_DATA */
PINMUX_DATA_END,
PINMUX_INPUT_BEGIN,
- PORT_273(IN), /* PORT0_IN -> PORT272_IN */
+ PORT_ALL(IN), /* PORT0_IN -> PORT272_IN */
PINMUX_INPUT_END,
PINMUX_INPUT_PULLUP_BEGIN,
- PORT_273(IN_PU), /* PORT0_IN_PU -> PORT272_IN_PU */
+ PORT_ALL(IN_PU), /* PORT0_IN_PU -> PORT272_IN_PU */
PINMUX_INPUT_PULLUP_END,
PINMUX_INPUT_PULLDOWN_BEGIN,
- PORT_273(IN_PD), /* PORT0_IN_PD -> PORT272_IN_PD */
+ PORT_ALL(IN_PD), /* PORT0_IN_PD -> PORT272_IN_PD */
PINMUX_INPUT_PULLDOWN_END,
PINMUX_OUTPUT_BEGIN,
- PORT_273(OUT), /* PORT0_OUT -> PORT272_OUT */
+ PORT_ALL(OUT), /* PORT0_OUT -> PORT272_OUT */
PINMUX_OUTPUT_END,
PINMUX_FUNCTION_BEGIN,
- PORT_273(FN_IN), /* PORT0_FN_IN -> PORT272_FN_IN */
- PORT_273(FN_OUT), /* PORT0_FN_OUT -> PORT272_FN_OUT */
- PORT_273(FN0), /* PORT0_FN0 -> PORT272_FN0 */
- PORT_273(FN1), /* PORT0_FN1 -> PORT272_FN1 */
- PORT_273(FN2), /* PORT0_FN2 -> PORT272_FN2 */
- PORT_273(FN3), /* PORT0_FN3 -> PORT272_FN3 */
- PORT_273(FN4), /* PORT0_FN4 -> PORT272_FN4 */
- PORT_273(FN5), /* PORT0_FN5 -> PORT272_FN5 */
- PORT_273(FN6), /* PORT0_FN6 -> PORT272_FN6 */
- PORT_273(FN7), /* PORT0_FN7 -> PORT272_FN7 */
+ PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT272_FN_IN */
+ PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT272_FN_OUT */
+ PORT_ALL(FN0), /* PORT0_FN0 -> PORT272_FN0 */
+ PORT_ALL(FN1), /* PORT0_FN1 -> PORT272_FN1 */
+ PORT_ALL(FN2), /* PORT0_FN2 -> PORT272_FN2 */
+ PORT_ALL(FN3), /* PORT0_FN3 -> PORT272_FN3 */
+ PORT_ALL(FN4), /* PORT0_FN4 -> PORT272_FN4 */
+ PORT_ALL(FN5), /* PORT0_FN5 -> PORT272_FN5 */
+ PORT_ALL(FN6), /* PORT0_FN6 -> PORT272_FN6 */
+ PORT_ALL(FN7), /* PORT0_FN7 -> PORT272_FN7 */
MSELBCR_MSEL2_1, MSELBCR_MSEL2_0,
PINMUX_FUNCTION_END,
PINMUX_MARK_END,
};
-#define PORT_DATA_I(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
-
-#define PORT_DATA_I_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PD)
-
-#define PORT_DATA_I_PU(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PU)
-
-#define PORT_DATA_I_PU_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
-#define PORT_DATA_O(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
-
-#define PORT_DATA_IO(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
- PORT##nr##_IN)
-
-#define PORT_DATA_IO_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
- PORT##nr##_IN, PORT##nr##_IN_PD)
-
-#define PORT_DATA_IO_PU(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
- PORT##nr##_IN, PORT##nr##_IN_PU)
-
-#define PORT_DATA_IO_PU_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
- PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
-
static pinmux_enum_t pinmux_data[] = {
/* specify valid pin states for each pin in GPIO mode */
PINMUX_DATA(DIVLOCK_MARK, PORT272_FN1),
};
-#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
-#define GPIO_PORT_273() _273(_GPIO_PORT, , unused)
-#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
-
static struct pinmux_gpio pinmux_gpios[] = {
/* 49-1 -> 49-6 (GPIO) */
- GPIO_PORT_273(),
+ GPIO_PORT_ALL(),
/* Special Pull-up / Pull-down Functions */
GPIO_FN(PORT48_KEYIN0_PU), GPIO_FN(PORT49_KEYIN1_PU),
GPIO_FN(DIVLOCK),
};
-/* helper for top 4 bits in PORTnCR */
-#define PCRH(in, in_pd, in_pu, out) \
- 0, (out), (in), 0, \
- 0, 0, 0, 0, \
- 0, 0, (in_pd), 0, \
- 0, 0, (in_pu), 0
-
-#define PORTCR(nr, reg) \
- { PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
- PCRH(PORT##nr##_IN, PORT##nr##_IN_PD, \
- PORT##nr##_IN_PU, PORT##nr##_OUT), \
- PORT##nr##_FN0, PORT##nr##_FN1, PORT##nr##_FN2, \
- PORT##nr##_FN3, PORT##nr##_FN4, PORT##nr##_FN5, \
- PORT##nr##_FN6, PORT##nr##_FN7 } \
- }
-
static struct pinmux_cfg_reg pinmux_config_regs[] = {
PORTCR(0, 0xe6050000), /* PORT0CR */
PORTCR(1, 0xe6050001), /* PORT1CR */
#include <linux/gpio.h>
#include <mach/sh7372.h>
-#define _1(fn, pfx, sfx) fn(pfx, sfx)
-
-#define _10(fn, pfx, sfx) \
- _1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx), \
- _1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx), \
- _1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx), \
- _1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx), \
- _1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
-
-#define _80(fn, pfx, sfx) \
- _10(fn, pfx##1, sfx), _10(fn, pfx##2, sfx), \
- _10(fn, pfx##3, sfx), _10(fn, pfx##4, sfx), \
- _10(fn, pfx##5, sfx), _10(fn, pfx##6, sfx), \
- _10(fn, pfx##7, sfx), _10(fn, pfx##8, sfx)
-
-#define _190(fn, pfx, sfx) \
- _10(fn, pfx, sfx), _80(fn, pfx, sfx), _10(fn, pfx##9, sfx), \
- _10(fn, pfx##10, sfx), _80(fn, pfx##1, sfx), _1(fn, pfx##190, sfx)
-
-#define _PORT(pfx, sfx) pfx##_##sfx
-#define PORT_ALL(str) _190(_PORT, PORT, str)
+#define CPU_ALL_PORT(fn, pfx, sfx) \
+ PORT_10(fn, pfx, sfx), PORT_90(fn, pfx, sfx), \
+ PORT_10(fn, pfx##10, sfx), PORT_10(fn, pfx##11, sfx), \
+ PORT_10(fn, pfx##12, sfx), PORT_10(fn, pfx##13, sfx), \
+ PORT_10(fn, pfx##14, sfx), PORT_10(fn, pfx##15, sfx), \
+ PORT_10(fn, pfx##16, sfx), PORT_10(fn, pfx##17, sfx), \
+ PORT_10(fn, pfx##18, sfx), PORT_1(fn, pfx##190, sfx)
enum {
PINMUX_RESERVED = 0,
PINMUX_MARK_END,
};
-/* PORT_DATA_I_PD(nr) */
-#define _I___D(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PD)
-
-/* PORT_DATA_I_PU(nr) */
-#define _I__U_(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PU)
-
-/* PORT_DATA_I_PU_PD(nr) */
-#define _I__UD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
-/* PORT_DATA_O(nr) */
-#define __O___(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
-
-/* PORT_DATA_IO(nr) */
-#define _IO___(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
- PORT##nr##_IN)
-
-/* PORT_DATA_IO_PD(nr) */
-#define _IO__D(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
- PORT##nr##_IN, PORT##nr##_IN_PD)
-
-/* PORT_DATA_IO_PU(nr) */
-#define _IO_U_(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
- PORT##nr##_IN, PORT##nr##_IN_PU)
-
-/* PORT_DATA_IO_PU_PD(nr) */
-#define _IO_UD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
- PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
-
static pinmux_enum_t pinmux_data[] = {
/* specify valid pin states for each pin in GPIO mode */
-
- _IO__D(0), _IO__D(1), __O___(2), _I___D(3), _I___D(4),
- _I___D(5), _IO_UD(6), _I___D(7), _IO__D(8), __O___(9),
-
- __O___(10), __O___(11), _IO_UD(12), _IO__D(13), _IO__D(14),
- __O___(15), _IO__D(16), _IO__D(17), _I___D(18), _IO___(19),
-
- _IO___(20), _IO___(21), _IO___(22), _IO___(23), _IO___(24),
- _IO___(25), _IO___(26), _IO___(27), _IO___(28), _IO___(29),
-
- _IO___(30), _IO___(31), _IO___(32), _IO___(33), _IO___(34),
- _IO___(35), _IO___(36), _IO___(37), _IO___(38), _IO___(39),
-
- _IO___(40), _IO___(41), _IO___(42), _IO___(43), _IO___(44),
- _IO___(45), _IO_U_(46), _IO_U_(47), _IO_U_(48), _IO_U_(49),
-
- _IO_U_(50), _IO_U_(51), _IO_U_(52), _IO_U_(53), _IO_U_(54),
- _IO_U_(55), _IO_U_(56), _IO_U_(57), _IO_U_(58), _IO_U_(59),
-
- _IO_U_(60), _IO_U_(61), _IO___(62), __O___(63), __O___(64),
- _IO_U_(65), __O___(66), _IO_U_(67), __O___(68), _IO___(69), /*66?*/
-
- _IO___(70), _IO___(71), __O___(72), _I__U_(73), _I__UD(74),
- _IO_UD(75), _IO_UD(76), _IO_UD(77), _IO_UD(78), _IO_UD(79),
-
- _IO_UD(80), _IO_UD(81), _IO_UD(82), _IO_UD(83), _IO_UD(84),
- _IO_UD(85), _IO_UD(86), _IO_UD(87), _IO_UD(88), _IO_UD(89),
-
- _IO_UD(90), _IO_UD(91), _IO_UD(92), _IO_UD(93), _IO_UD(94),
- _IO_UD(95), _IO_U_(96), _IO_UD(97), _IO_UD(98), __O___(99), /*99?*/
-
- _IO__D(100), _IO__D(101), _IO__D(102), _IO__D(103), _IO__D(104),
- _IO__D(105), _IO_U_(106), _IO_U_(107), _IO_U_(108), _IO_U_(109),
-
- _IO_U_(110), _IO_U_(111), _IO__D(112), _IO__D(113), _IO_U_(114),
- _IO_U_(115), _IO_U_(116), _IO_U_(117), _IO_U_(118), _IO_U_(119),
-
- _IO_U_(120), _IO__D(121), _IO__D(122), _IO__D(123), _IO__D(124),
- _IO__D(125), _IO__D(126), _IO__D(127), _IO__D(128), _IO_UD(129),
-
- _IO_UD(130), _IO_UD(131), _IO_UD(132), _IO_UD(133), _IO_UD(134),
- _IO_UD(135), _IO__D(136), _IO__D(137), _IO__D(138), _IO__D(139),
-
- _IO__D(140), _IO__D(141), _IO__D(142), _IO_UD(143), _IO__D(144),
- _IO__D(145), _IO__D(146), _IO__D(147), _IO__D(148), _IO__D(149),
-
- _IO__D(150), _IO__D(151), _IO_UD(152), _I___D(153), _IO_UD(154),
- _I___D(155), _IO__D(156), _IO__D(157), _I___D(158), _IO__D(159),
-
- __O___(160), _IO__D(161), _IO__D(162), _IO__D(163), _I___D(164),
- _IO__D(165), _I___D(166), _I___D(167), _I___D(168), _I___D(169),
-
- _I___D(170), __O___(171), _IO_UD(172), _IO_UD(173), _IO_UD(174),
- _IO_UD(175), _IO_UD(176), _IO_UD(177), _IO_UD(178), __O___(179),
-
- _IO_UD(180), _IO_UD(181), _IO_UD(182), _IO_UD(183), _IO_UD(184),
- __O___(185), _IO_UD(186), _IO_UD(187), _IO_UD(188), _IO_UD(189),
-
- _IO_UD(190),
+ PORT_DATA_IO_PD(0), PORT_DATA_IO_PD(1),
+ PORT_DATA_O(2), PORT_DATA_I_PD(3),
+ PORT_DATA_I_PD(4), PORT_DATA_I_PD(5),
+ PORT_DATA_IO_PU_PD(6), PORT_DATA_I_PD(7),
+ PORT_DATA_IO_PD(8), PORT_DATA_O(9),
+
+ PORT_DATA_O(10), PORT_DATA_O(11),
+ PORT_DATA_IO_PU_PD(12), PORT_DATA_IO_PD(13),
+ PORT_DATA_IO_PD(14), PORT_DATA_O(15),
+ PORT_DATA_IO_PD(16), PORT_DATA_IO_PD(17),
+ PORT_DATA_I_PD(18), PORT_DATA_IO(19),
+
+ PORT_DATA_IO(20), PORT_DATA_IO(21),
+ PORT_DATA_IO(22), PORT_DATA_IO(23),
+ PORT_DATA_IO(24), PORT_DATA_IO(25),
+ PORT_DATA_IO(26), PORT_DATA_IO(27),
+ PORT_DATA_IO(28), PORT_DATA_IO(29),
+
+ PORT_DATA_IO(30), PORT_DATA_IO(31),
+ PORT_DATA_IO(32), PORT_DATA_IO(33),
+ PORT_DATA_IO(34), PORT_DATA_IO(35),
+ PORT_DATA_IO(36), PORT_DATA_IO(37),
+ PORT_DATA_IO(38), PORT_DATA_IO(39),
+
+ PORT_DATA_IO(40), PORT_DATA_IO(41),
+ PORT_DATA_IO(42), PORT_DATA_IO(43),
+ PORT_DATA_IO(44), PORT_DATA_IO(45),
+ PORT_DATA_IO_PU(46), PORT_DATA_IO_PU(47),
+ PORT_DATA_IO_PU(48), PORT_DATA_IO_PU(49),
+
+ PORT_DATA_IO_PU(50), PORT_DATA_IO_PU(51),
+ PORT_DATA_IO_PU(52), PORT_DATA_IO_PU(53),
+ PORT_DATA_IO_PU(54), PORT_DATA_IO_PU(55),
+ PORT_DATA_IO_PU(56), PORT_DATA_IO_PU(57),
+ PORT_DATA_IO_PU(58), PORT_DATA_IO_PU(59),
+
+ PORT_DATA_IO_PU(60), PORT_DATA_IO_PU(61),
+ PORT_DATA_IO(62), PORT_DATA_O(63),
+ PORT_DATA_O(64), PORT_DATA_IO_PU(65),
+ PORT_DATA_O(66), PORT_DATA_IO_PU(67), /*66?*/
+ PORT_DATA_O(68), PORT_DATA_IO(69),
+
+ PORT_DATA_IO(70), PORT_DATA_IO(71),
+ PORT_DATA_O(72), PORT_DATA_I_PU(73),
+ PORT_DATA_I_PU_PD(74), PORT_DATA_IO_PU_PD(75),
+ PORT_DATA_IO_PU_PD(76), PORT_DATA_IO_PU_PD(77),
+ PORT_DATA_IO_PU_PD(78), PORT_DATA_IO_PU_PD(79),
+
+ PORT_DATA_IO_PU_PD(80), PORT_DATA_IO_PU_PD(81),
+ PORT_DATA_IO_PU_PD(82), PORT_DATA_IO_PU_PD(83),
+ PORT_DATA_IO_PU_PD(84), PORT_DATA_IO_PU_PD(85),
+ PORT_DATA_IO_PU_PD(86), PORT_DATA_IO_PU_PD(87),
+ PORT_DATA_IO_PU_PD(88), PORT_DATA_IO_PU_PD(89),
+
+ PORT_DATA_IO_PU_PD(90), PORT_DATA_IO_PU_PD(91),
+ PORT_DATA_IO_PU_PD(92), PORT_DATA_IO_PU_PD(93),
+ PORT_DATA_IO_PU_PD(94), PORT_DATA_IO_PU_PD(95),
+ PORT_DATA_IO_PU(96), PORT_DATA_IO_PU_PD(97),
+ PORT_DATA_IO_PU_PD(98), PORT_DATA_O(99), /*99?*/
+
+ PORT_DATA_IO_PD(100), PORT_DATA_IO_PD(101),
+ PORT_DATA_IO_PD(102), PORT_DATA_IO_PD(103),
+ PORT_DATA_IO_PD(104), PORT_DATA_IO_PD(105),
+ PORT_DATA_IO_PU(106), PORT_DATA_IO_PU(107),
+ PORT_DATA_IO_PU(108), PORT_DATA_IO_PU(109),
+
+ PORT_DATA_IO_PU(110), PORT_DATA_IO_PU(111),
+ PORT_DATA_IO_PD(112), PORT_DATA_IO_PD(113),
+ PORT_DATA_IO_PU(114), PORT_DATA_IO_PU(115),
+ PORT_DATA_IO_PU(116), PORT_DATA_IO_PU(117),
+ PORT_DATA_IO_PU(118), PORT_DATA_IO_PU(119),
+
+ PORT_DATA_IO_PU(120), PORT_DATA_IO_PD(121),
+ PORT_DATA_IO_PD(122), PORT_DATA_IO_PD(123),
+ PORT_DATA_IO_PD(124), PORT_DATA_IO_PD(125),
+ PORT_DATA_IO_PD(126), PORT_DATA_IO_PD(127),
+ PORT_DATA_IO_PD(128), PORT_DATA_IO_PU_PD(129),
+
+ PORT_DATA_IO_PU_PD(130), PORT_DATA_IO_PU_PD(131),
+ PORT_DATA_IO_PU_PD(132), PORT_DATA_IO_PU_PD(133),
+ PORT_DATA_IO_PU_PD(134), PORT_DATA_IO_PU_PD(135),
+ PORT_DATA_IO_PD(136), PORT_DATA_IO_PD(137),
+ PORT_DATA_IO_PD(138), PORT_DATA_IO_PD(139),
+
+ PORT_DATA_IO_PD(140), PORT_DATA_IO_PD(141),
+ PORT_DATA_IO_PD(142), PORT_DATA_IO_PU_PD(143),
+ PORT_DATA_IO_PD(144), PORT_DATA_IO_PD(145),
+ PORT_DATA_IO_PD(146), PORT_DATA_IO_PD(147),
+ PORT_DATA_IO_PD(148), PORT_DATA_IO_PD(149),
+
+ PORT_DATA_IO_PD(150), PORT_DATA_IO_PD(151),
+ PORT_DATA_IO_PU_PD(152), PORT_DATA_I_PD(153),
+ PORT_DATA_IO_PU_PD(154), PORT_DATA_I_PD(155),
+ PORT_DATA_IO_PD(156), PORT_DATA_IO_PD(157),
+ PORT_DATA_I_PD(158), PORT_DATA_IO_PD(159),
+
+ PORT_DATA_O(160), PORT_DATA_IO_PD(161),
+ PORT_DATA_IO_PD(162), PORT_DATA_IO_PD(163),
+ PORT_DATA_I_PD(164), PORT_DATA_IO_PD(165),
+ PORT_DATA_I_PD(166), PORT_DATA_I_PD(167),
+ PORT_DATA_I_PD(168), PORT_DATA_I_PD(169),
+
+ PORT_DATA_I_PD(170), PORT_DATA_O(171),
+ PORT_DATA_IO_PU_PD(172), PORT_DATA_IO_PU_PD(173),
+ PORT_DATA_IO_PU_PD(174), PORT_DATA_IO_PU_PD(175),
+ PORT_DATA_IO_PU_PD(176), PORT_DATA_IO_PU_PD(177),
+ PORT_DATA_IO_PU_PD(178), PORT_DATA_O(179),
+
+ PORT_DATA_IO_PU_PD(180), PORT_DATA_IO_PU_PD(181),
+ PORT_DATA_IO_PU_PD(182), PORT_DATA_IO_PU_PD(183),
+ PORT_DATA_IO_PU_PD(184), PORT_DATA_O(185),
+ PORT_DATA_IO_PU_PD(186), PORT_DATA_IO_PU_PD(187),
+ PORT_DATA_IO_PU_PD(188), PORT_DATA_IO_PU_PD(189),
+
+ PORT_DATA_IO_PU_PD(190),
/* IRQ */
PINMUX_DATA(IRQ0_6_MARK, PORT6_FN0, MSEL1CR_0_0),
PINMUX_DATA(MFIv4_MARK, MSEL4CR_6_1),
};
-#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
-#define GPIO_PORT_ALL() _190(_GPIO_PORT, , unused)
-#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
-
static struct pinmux_gpio pinmux_gpios[] = {
/* PORT */
GPIO_FN(SDENC_DV_CLKI),
};
-/* helper for top 4 bits in PORTnCR */
-#define PCRH(in, in_pd, in_pu, out) \
- 0, (out), (in), 0, \
- 0, 0, 0, 0, \
- 0, 0, (in_pd), 0, \
- 0, 0, (in_pu), 0
-
-#define PORTCR(nr, reg) \
- { PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
- PCRH(PORT##nr##_IN, PORT##nr##_IN_PD, \
- PORT##nr##_IN_PU, PORT##nr##_OUT), \
- PORT##nr##_FN0, PORT##nr##_FN1, PORT##nr##_FN2, \
- PORT##nr##_FN3, PORT##nr##_FN4, PORT##nr##_FN5, \
- PORT##nr##_FN6, PORT##nr##_FN7 } \
- }
-
static struct pinmux_cfg_reg pinmux_config_regs[] = {
PORTCR(0, 0xE6051000), /* PORT0CR */
PORTCR(1, 0xE6051001), /* PORT1CR */
#include <linux/gpio.h>
#include <mach/sh7377.h>
-#define _1(fn, pfx, sfx) fn(pfx, sfx)
-
-#define _10(fn, pfx, sfx) \
- _1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx), \
- _1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx), \
- _1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx), \
- _1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx), \
- _1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
-
-#define _90(fn, pfx, sfx) \
- _10(fn, pfx##1, sfx), _10(fn, pfx##2, sfx), \
- _10(fn, pfx##3, sfx), _10(fn, pfx##4, sfx), \
- _10(fn, pfx##5, sfx), _10(fn, pfx##6, sfx), \
- _10(fn, pfx##7, sfx), _10(fn, pfx##8, sfx), \
- _10(fn, pfx##9, sfx)
-
-#define _265(fn, pfx, sfx) \
- _10(fn, pfx, sfx), _90(fn, pfx, sfx), \
- _10(fn, pfx##10, sfx), \
- _1(fn, pfx##110, sfx), _1(fn, pfx##111, sfx), \
- _1(fn, pfx##112, sfx), _1(fn, pfx##113, sfx), \
- _1(fn, pfx##114, sfx), _1(fn, pfx##115, sfx), \
- _1(fn, pfx##116, sfx), _1(fn, pfx##117, sfx), \
- _1(fn, pfx##118, sfx), \
- _1(fn, pfx##128, sfx), _1(fn, pfx##129, sfx), \
- _10(fn, pfx##13, sfx), _10(fn, pfx##14, sfx), \
- _10(fn, pfx##15, sfx), \
- _1(fn, pfx##160, sfx), _1(fn, pfx##161, sfx), \
- _1(fn, pfx##162, sfx), _1(fn, pfx##163, sfx), \
- _1(fn, pfx##164, sfx), \
- _1(fn, pfx##192, sfx), _1(fn, pfx##193, sfx), \
- _1(fn, pfx##194, sfx), _1(fn, pfx##195, sfx), \
- _1(fn, pfx##196, sfx), _1(fn, pfx##197, sfx), \
- _1(fn, pfx##198, sfx), _1(fn, pfx##199, sfx), \
- _10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx), \
- _10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx), \
- _10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx), \
- _1(fn, pfx##260, sfx), _1(fn, pfx##261, sfx), \
- _1(fn, pfx##262, sfx), _1(fn, pfx##263, sfx), \
- _1(fn, pfx##264, sfx)
-
-#define _PORT(pfx, sfx) pfx##_##sfx
-#define PORT_265(str) _265(_PORT, PORT, str)
+#define CPU_ALL_PORT(fn, pfx, sfx) \
+ PORT_10(fn, pfx, sfx), PORT_90(fn, pfx, sfx), \
+ PORT_10(fn, pfx##10, sfx), \
+ PORT_1(fn, pfx##110, sfx), PORT_1(fn, pfx##111, sfx), \
+ PORT_1(fn, pfx##112, sfx), PORT_1(fn, pfx##113, sfx), \
+ PORT_1(fn, pfx##114, sfx), PORT_1(fn, pfx##115, sfx), \
+ PORT_1(fn, pfx##116, sfx), PORT_1(fn, pfx##117, sfx), \
+ PORT_1(fn, pfx##118, sfx), \
+ PORT_1(fn, pfx##128, sfx), PORT_1(fn, pfx##129, sfx), \
+ PORT_10(fn, pfx##13, sfx), PORT_10(fn, pfx##14, sfx), \
+ PORT_10(fn, pfx##15, sfx), \
+ PORT_1(fn, pfx##160, sfx), PORT_1(fn, pfx##161, sfx), \
+ PORT_1(fn, pfx##162, sfx), PORT_1(fn, pfx##163, sfx), \
+ PORT_1(fn, pfx##164, sfx), \
+ PORT_1(fn, pfx##192, sfx), PORT_1(fn, pfx##193, sfx), \
+ PORT_1(fn, pfx##194, sfx), PORT_1(fn, pfx##195, sfx), \
+ PORT_1(fn, pfx##196, sfx), PORT_1(fn, pfx##197, sfx), \
+ PORT_1(fn, pfx##198, sfx), PORT_1(fn, pfx##199, sfx), \
+ PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx), \
+ PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx), \
+ PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx), \
+ PORT_1(fn, pfx##260, sfx), PORT_1(fn, pfx##261, sfx), \
+ PORT_1(fn, pfx##262, sfx), PORT_1(fn, pfx##263, sfx), \
+ PORT_1(fn, pfx##264, sfx)
enum {
PINMUX_RESERVED = 0,
PINMUX_DATA_BEGIN,
- PORT_265(DATA), /* PORT0_DATA -> PORT264_DATA */
+ PORT_ALL(DATA), /* PORT0_DATA -> PORT264_DATA */
PINMUX_DATA_END,
PINMUX_INPUT_BEGIN,
- PORT_265(IN), /* PORT0_IN -> PORT264_IN */
+ PORT_ALL(IN), /* PORT0_IN -> PORT264_IN */
PINMUX_INPUT_END,
PINMUX_INPUT_PULLUP_BEGIN,
- PORT_265(IN_PU), /* PORT0_IN_PU -> PORT264_IN_PU */
+ PORT_ALL(IN_PU), /* PORT0_IN_PU -> PORT264_IN_PU */
PINMUX_INPUT_PULLUP_END,
PINMUX_INPUT_PULLDOWN_BEGIN,
- PORT_265(IN_PD), /* PORT0_IN_PD -> PORT264_IN_PD */
+ PORT_ALL(IN_PD), /* PORT0_IN_PD -> PORT264_IN_PD */
PINMUX_INPUT_PULLDOWN_END,
PINMUX_OUTPUT_BEGIN,
- PORT_265(OUT), /* PORT0_OUT -> PORT264_OUT */
+ PORT_ALL(OUT), /* PORT0_OUT -> PORT264_OUT */
PINMUX_OUTPUT_END,
PINMUX_FUNCTION_BEGIN,
- PORT_265(FN_IN), /* PORT0_FN_IN -> PORT264_FN_IN */
- PORT_265(FN_OUT), /* PORT0_FN_OUT -> PORT264_FN_OUT */
- PORT_265(FN0), /* PORT0_FN0 -> PORT264_FN0 */
- PORT_265(FN1), /* PORT0_FN1 -> PORT264_FN1 */
- PORT_265(FN2), /* PORT0_FN2 -> PORT264_FN2 */
- PORT_265(FN3), /* PORT0_FN3 -> PORT264_FN3 */
- PORT_265(FN4), /* PORT0_FN4 -> PORT264_FN4 */
- PORT_265(FN5), /* PORT0_FN5 -> PORT264_FN5 */
- PORT_265(FN6), /* PORT0_FN6 -> PORT264_FN6 */
- PORT_265(FN7), /* PORT0_FN7 -> PORT264_FN7 */
+ PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT264_FN_IN */
+ PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT264_FN_OUT */
+ PORT_ALL(FN0), /* PORT0_FN0 -> PORT264_FN0 */
+ PORT_ALL(FN1), /* PORT0_FN1 -> PORT264_FN1 */
+ PORT_ALL(FN2), /* PORT0_FN2 -> PORT264_FN2 */
+ PORT_ALL(FN3), /* PORT0_FN3 -> PORT264_FN3 */
+ PORT_ALL(FN4), /* PORT0_FN4 -> PORT264_FN4 */
+ PORT_ALL(FN5), /* PORT0_FN5 -> PORT264_FN5 */
+ PORT_ALL(FN6), /* PORT0_FN6 -> PORT264_FN6 */
+ PORT_ALL(FN7), /* PORT0_FN7 -> PORT264_FN7 */
MSELBCR_MSEL17_1, MSELBCR_MSEL17_0,
MSELBCR_MSEL16_1, MSELBCR_MSEL16_0,
PINMUX_MARK_END,
};
-#define PORT_DATA_I(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
-
-#define PORT_DATA_I_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PD)
-
-#define PORT_DATA_I_PU(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PU)
-
-#define PORT_DATA_I_PU_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PD, \
- PORT##nr##_IN_PU)
-
-#define PORT_DATA_O(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_OUT)
-
-#define PORT_DATA_IO(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_OUT, PORT##nr##_IN)
-
-#define PORT_DATA_IO_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_OUT, PORT##nr##_IN, \
- PORT##nr##_IN_PD)
-
-#define PORT_DATA_IO_PU(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_OUT, PORT##nr##_IN, \
- PORT##nr##_IN_PU)
-
-#define PORT_DATA_IO_PU_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_OUT, PORT##nr##_IN, \
- PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
static pinmux_enum_t pinmux_data[] = {
/* specify valid pin states for each pin in GPIO mode */
/* 55-1 (GPIO) */
PINMUX_DATA(RESETOUTS_MARK, PORT264_FN1),
};
-#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
-#define GPIO_PORT_265() _265(_GPIO_PORT, , unused)
-#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
-
static struct pinmux_gpio pinmux_gpios[] = {
/* 55-1 -> 55-5 (GPIO) */
- GPIO_PORT_265(),
+ GPIO_PORT_ALL(),
/* Special Pull-up / Pull-down Functions */
GPIO_FN(PORT66_KEYIN0_PU), GPIO_FN(PORT67_KEYIN1_PU),
GPIO_FN(RESETOUTS),
};
-/* helper for top 4 bits in PORTnCR */
-#define PCRH(in, in_pd, in_pu, out) \
- 0, (out), (in), 0, \
- 0, 0, 0, 0, \
- 0, 0, (in_pd), 0, \
- 0, 0, (in_pu), 0
-
-#define PORTCR(nr, reg) \
- { PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
- PCRH(PORT##nr##_IN, PORT##nr##_IN_PD, \
- PORT##nr##_IN_PU, PORT##nr##_OUT), \
- PORT##nr##_FN0, PORT##nr##_FN1, \
- PORT##nr##_FN2, PORT##nr##_FN3, \
- PORT##nr##_FN4, PORT##nr##_FN5, \
- PORT##nr##_FN6, PORT##nr##_FN7 } \
- }
-
static struct pinmux_cfg_reg pinmux_config_regs[] = {
PORTCR(0, 0xe6050000), /* PORT0CR */
PORTCR(1, 0xe6050001), /* PORT1CR */
#include <linux/kernel.h>
#include <linux/gpio.h>
#include <mach/sh73a0.h>
-
-#define _1(fn, pfx, sfx) fn(pfx, sfx)
-
-#define _10(fn, pfx, sfx) \
- _1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx), \
- _1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx), \
- _1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx), \
- _1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx), \
- _1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
-
-#define _310(fn, pfx, sfx) \
- _10(fn, pfx, sfx), _10(fn, pfx##1, sfx), \
- _10(fn, pfx##2, sfx), _10(fn, pfx##3, sfx), \
- _10(fn, pfx##4, sfx), _10(fn, pfx##5, sfx), \
- _10(fn, pfx##6, sfx), _10(fn, pfx##7, sfx), \
- _10(fn, pfx##8, sfx), _10(fn, pfx##9, sfx), \
- _10(fn, pfx##10, sfx), \
- _1(fn, pfx##110, sfx), _1(fn, pfx##111, sfx), \
- _1(fn, pfx##112, sfx), _1(fn, pfx##113, sfx), \
- _1(fn, pfx##114, sfx), _1(fn, pfx##115, sfx), \
- _1(fn, pfx##116, sfx), _1(fn, pfx##117, sfx), \
- _1(fn, pfx##118, sfx), \
- _1(fn, pfx##128, sfx), _1(fn, pfx##129, sfx), \
- _10(fn, pfx##13, sfx), _10(fn, pfx##14, sfx), \
- _10(fn, pfx##15, sfx), \
- _1(fn, pfx##160, sfx), _1(fn, pfx##161, sfx), \
- _1(fn, pfx##162, sfx), _1(fn, pfx##163, sfx), \
- _1(fn, pfx##164, sfx), \
- _1(fn, pfx##192, sfx), _1(fn, pfx##193, sfx), \
- _1(fn, pfx##194, sfx), _1(fn, pfx##195, sfx), \
- _1(fn, pfx##196, sfx), _1(fn, pfx##197, sfx), \
- _1(fn, pfx##198, sfx), _1(fn, pfx##199, sfx), \
- _10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx), \
- _10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx), \
- _10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx), \
- _10(fn, pfx##26, sfx), _10(fn, pfx##27, sfx), \
- _1(fn, pfx##280, sfx), _1(fn, pfx##281, sfx), \
- _1(fn, pfx##282, sfx), \
- _1(fn, pfx##288, sfx), _1(fn, pfx##289, sfx), \
- _10(fn, pfx##29, sfx), _10(fn, pfx##30, sfx)
-
-#define _PORT(pfx, sfx) pfx##_##sfx
-#define PORT_310(str) _310(_PORT, PORT, str)
+#include <mach/irqs.h>
+
+#define CPU_ALL_PORT(fn, pfx, sfx) \
+ PORT_10(fn, pfx, sfx), PORT_10(fn, pfx##1, sfx), \
+ PORT_10(fn, pfx##2, sfx), PORT_10(fn, pfx##3, sfx), \
+ PORT_10(fn, pfx##4, sfx), PORT_10(fn, pfx##5, sfx), \
+ PORT_10(fn, pfx##6, sfx), PORT_10(fn, pfx##7, sfx), \
+ PORT_10(fn, pfx##8, sfx), PORT_10(fn, pfx##9, sfx), \
+ PORT_10(fn, pfx##10, sfx), \
+ PORT_1(fn, pfx##110, sfx), PORT_1(fn, pfx##111, sfx), \
+ PORT_1(fn, pfx##112, sfx), PORT_1(fn, pfx##113, sfx), \
+ PORT_1(fn, pfx##114, sfx), PORT_1(fn, pfx##115, sfx), \
+ PORT_1(fn, pfx##116, sfx), PORT_1(fn, pfx##117, sfx), \
+ PORT_1(fn, pfx##118, sfx), \
+ PORT_1(fn, pfx##128, sfx), PORT_1(fn, pfx##129, sfx), \
+ PORT_10(fn, pfx##13, sfx), PORT_10(fn, pfx##14, sfx), \
+ PORT_10(fn, pfx##15, sfx), \
+ PORT_1(fn, pfx##160, sfx), PORT_1(fn, pfx##161, sfx), \
+ PORT_1(fn, pfx##162, sfx), PORT_1(fn, pfx##163, sfx), \
+ PORT_1(fn, pfx##164, sfx), \
+ PORT_1(fn, pfx##192, sfx), PORT_1(fn, pfx##193, sfx), \
+ PORT_1(fn, pfx##194, sfx), PORT_1(fn, pfx##195, sfx), \
+ PORT_1(fn, pfx##196, sfx), PORT_1(fn, pfx##197, sfx), \
+ PORT_1(fn, pfx##198, sfx), PORT_1(fn, pfx##199, sfx), \
+ PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx), \
+ PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx), \
+ PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx), \
+ PORT_10(fn, pfx##26, sfx), PORT_10(fn, pfx##27, sfx), \
+ PORT_1(fn, pfx##280, sfx), PORT_1(fn, pfx##281, sfx), \
+ PORT_1(fn, pfx##282, sfx), \
+ PORT_1(fn, pfx##288, sfx), PORT_1(fn, pfx##289, sfx), \
+ PORT_10(fn, pfx##29, sfx), PORT_10(fn, pfx##30, sfx)
enum {
PINMUX_RESERVED = 0,
PINMUX_DATA_BEGIN,
- PORT_310(DATA), /* PORT0_DATA -> PORT309_DATA */
+ PORT_ALL(DATA), /* PORT0_DATA -> PORT309_DATA */
PINMUX_DATA_END,
PINMUX_INPUT_BEGIN,
- PORT_310(IN), /* PORT0_IN -> PORT309_IN */
+ PORT_ALL(IN), /* PORT0_IN -> PORT309_IN */
PINMUX_INPUT_END,
PINMUX_INPUT_PULLUP_BEGIN,
- PORT_310(IN_PU), /* PORT0_IN_PU -> PORT309_IN_PU */
+ PORT_ALL(IN_PU), /* PORT0_IN_PU -> PORT309_IN_PU */
PINMUX_INPUT_PULLUP_END,
PINMUX_INPUT_PULLDOWN_BEGIN,
- PORT_310(IN_PD), /* PORT0_IN_PD -> PORT309_IN_PD */
+ PORT_ALL(IN_PD), /* PORT0_IN_PD -> PORT309_IN_PD */
PINMUX_INPUT_PULLDOWN_END,
PINMUX_OUTPUT_BEGIN,
- PORT_310(OUT), /* PORT0_OUT -> PORT309_OUT */
+ PORT_ALL(OUT), /* PORT0_OUT -> PORT309_OUT */
PINMUX_OUTPUT_END,
PINMUX_FUNCTION_BEGIN,
- PORT_310(FN_IN), /* PORT0_FN_IN -> PORT309_FN_IN */
- PORT_310(FN_OUT), /* PORT0_FN_OUT -> PORT309_FN_OUT */
- PORT_310(FN0), /* PORT0_FN0 -> PORT309_FN0 */
- PORT_310(FN1), /* PORT0_FN1 -> PORT309_FN1 */
- PORT_310(FN2), /* PORT0_FN2 -> PORT309_FN2 */
- PORT_310(FN3), /* PORT0_FN3 -> PORT309_FN3 */
- PORT_310(FN4), /* PORT0_FN4 -> PORT309_FN4 */
- PORT_310(FN5), /* PORT0_FN5 -> PORT309_FN5 */
- PORT_310(FN6), /* PORT0_FN6 -> PORT309_FN6 */
- PORT_310(FN7), /* PORT0_FN7 -> PORT309_FN7 */
+ PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT309_FN_IN */
+ PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT309_FN_OUT */
+ PORT_ALL(FN0), /* PORT0_FN0 -> PORT309_FN0 */
+ PORT_ALL(FN1), /* PORT0_FN1 -> PORT309_FN1 */
+ PORT_ALL(FN2), /* PORT0_FN2 -> PORT309_FN2 */
+ PORT_ALL(FN3), /* PORT0_FN3 -> PORT309_FN3 */
+ PORT_ALL(FN4), /* PORT0_FN4 -> PORT309_FN4 */
+ PORT_ALL(FN5), /* PORT0_FN5 -> PORT309_FN5 */
+ PORT_ALL(FN6), /* PORT0_FN6 -> PORT309_FN6 */
+ PORT_ALL(FN7), /* PORT0_FN7 -> PORT309_FN7 */
MSEL2CR_MSEL19_0, MSEL2CR_MSEL19_1,
MSEL2CR_MSEL18_0, MSEL2CR_MSEL18_1,
KEYIN5_PU_MARK,
KEYIN6_PU_MARK,
KEYIN7_PU_MARK,
+ SDHICD0_PU_MARK,
+ SDHID0_0_PU_MARK,
+ SDHID0_1_PU_MARK,
+ SDHID0_2_PU_MARK,
+ SDHID0_3_PU_MARK,
+ SDHICMD0_PU_MARK,
+ SDHIWP0_PU_MARK,
SDHID1_0_PU_MARK,
SDHID1_1_PU_MARK,
SDHID1_2_PU_MARK,
SDHID1_3_PU_MARK,
SDHICMD1_PU_MARK,
+ SDHID2_0_PU_MARK,
+ SDHID2_1_PU_MARK,
+ SDHID2_2_PU_MARK,
+ SDHID2_3_PU_MARK,
+ SDHICMD2_PU_MARK,
MMCCMD0_PU_MARK,
MMCCMD1_PU_MARK,
+ MMCD0_0_PU_MARK,
+ MMCD0_1_PU_MARK,
+ MMCD0_2_PU_MARK,
+ MMCD0_3_PU_MARK,
+ MMCD0_4_PU_MARK,
+ MMCD0_5_PU_MARK,
+ MMCD0_6_PU_MARK,
+ MMCD0_7_PU_MARK,
+ FSIBISLD_PU_MARK,
FSIACK_PU_MARK,
FSIAILR_PU_MARK,
FSIAIBT_PU_MARK,
PINMUX_MARK_END,
};
-#define PORT_DATA_I(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
-
-#define PORT_DATA_I_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PD)
-
-#define PORT_DATA_I_PU(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PU)
-
-#define PORT_DATA_I_PU_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PD, \
- PORT##nr##_IN_PU)
-
-#define PORT_DATA_O(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_OUT)
-
-#define PORT_DATA_IO(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_OUT, PORT##nr##_IN)
-
-#define PORT_DATA_IO_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_OUT, PORT##nr##_IN, \
- PORT##nr##_IN_PD)
-
-#define PORT_DATA_IO_PU(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_OUT, PORT##nr##_IN, \
- PORT##nr##_IN_PU)
-
-#define PORT_DATA_IO_PU_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_OUT, PORT##nr##_IN, \
- PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
static pinmux_enum_t pinmux_data[] = {
/* specify valid pin states for each pin in GPIO mode */
PINMUX_DATA(TS_SCK4_MARK, PORT268_FN3),
PINMUX_DATA(SDHICMD2_MARK, PORT269_FN1),
PINMUX_DATA(MMCCLK0_MARK, PORT270_FN1, MSEL4CR_MSEL15_0),
- PINMUX_DATA(MMCD0_0_MARK, PORT271_FN1, MSEL4CR_MSEL15_0),
- PINMUX_DATA(MMCD0_1_MARK, PORT272_FN1, MSEL4CR_MSEL15_0),
- PINMUX_DATA(MMCD0_2_MARK, PORT273_FN1, MSEL4CR_MSEL15_0),
- PINMUX_DATA(MMCD0_3_MARK, PORT274_FN1, MSEL4CR_MSEL15_0),
- PINMUX_DATA(MMCD0_4_MARK, PORT275_FN1, MSEL4CR_MSEL15_0), \
+ PINMUX_DATA(MMCD0_0_MARK, PORT271_FN1, PORT271_IN_PU,
+ MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_1_MARK, PORT272_FN1, PORT272_IN_PU,
+ MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_2_MARK, PORT273_FN1, PORT273_IN_PU,
+ MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_3_MARK, PORT274_FN1, PORT274_IN_PU,
+ MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_4_MARK, PORT275_FN1, PORT275_IN_PU,
+ MSEL4CR_MSEL15_0), \
PINMUX_DATA(TS_SPSYNC5_MARK, PORT275_FN3),
- PINMUX_DATA(MMCD0_5_MARK, PORT276_FN1, MSEL4CR_MSEL15_0), \
+ PINMUX_DATA(MMCD0_5_MARK, PORT276_FN1, PORT276_IN_PU,
+ MSEL4CR_MSEL15_0), \
PINMUX_DATA(TS_SDAT5_MARK, PORT276_FN3),
- PINMUX_DATA(MMCD0_6_MARK, PORT277_FN1, MSEL4CR_MSEL15_0), \
+ PINMUX_DATA(MMCD0_6_MARK, PORT277_FN1, PORT277_IN_PU,
+ MSEL4CR_MSEL15_0), \
PINMUX_DATA(TS_SDEN5_MARK, PORT277_FN3),
- PINMUX_DATA(MMCD0_7_MARK, PORT278_FN1, MSEL4CR_MSEL15_0), \
+ PINMUX_DATA(MMCD0_7_MARK, PORT278_FN1, PORT278_IN_PU,
+ MSEL4CR_MSEL15_0), \
PINMUX_DATA(TS_SCK5_MARK, PORT278_FN3),
- PINMUX_DATA(MMCCMD0_MARK, PORT279_FN1, MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCCMD0_MARK, PORT279_FN1, PORT279_IN_PU,
+ MSEL4CR_MSEL15_0),
PINMUX_DATA(RESETOUTS__MARK, PORT281_FN1), \
PINMUX_DATA(EXTAL2OUT_MARK, PORT281_FN2),
PINMUX_DATA(MCP_WAIT__MCP_FRB_MARK, PORT288_FN1),
PINMUX_DATA(KEYIN6_PU_MARK, PORT72_FN2, PORT72_IN_PU),
PINMUX_DATA(KEYIN7_PU_MARK, PORT73_FN2, PORT73_IN_PU),
- PINMUX_DATA(SDHID1_0_PU_MARK, PORT259_IN_PU, PORT259_FN1),
- PINMUX_DATA(SDHID1_1_PU_MARK, PORT260_IN_PU, PORT260_FN1),
- PINMUX_DATA(SDHID1_2_PU_MARK, PORT261_IN_PU, PORT261_FN1),
- PINMUX_DATA(SDHID1_3_PU_MARK, PORT262_IN_PU, PORT262_FN1),
- PINMUX_DATA(SDHICMD1_PU_MARK, PORT263_IN_PU, PORT263_FN1),
+ PINMUX_DATA(SDHICD0_PU_MARK, PORT251_FN1, PORT251_IN_PU),
+ PINMUX_DATA(SDHID0_0_PU_MARK, PORT252_FN1, PORT252_IN_PU),
+ PINMUX_DATA(SDHID0_1_PU_MARK, PORT253_FN1, PORT253_IN_PU),
+ PINMUX_DATA(SDHID0_2_PU_MARK, PORT254_FN1, PORT254_IN_PU),
+ PINMUX_DATA(SDHID0_3_PU_MARK, PORT255_FN1, PORT255_IN_PU),
+ PINMUX_DATA(SDHICMD0_PU_MARK, PORT256_FN1, PORT256_IN_PU),
+ PINMUX_DATA(SDHIWP0_PU_MARK, PORT257_FN1, PORT256_IN_PU),
+ PINMUX_DATA(SDHID1_0_PU_MARK, PORT259_FN1, PORT259_IN_PU),
+ PINMUX_DATA(SDHID1_1_PU_MARK, PORT260_FN1, PORT260_IN_PU),
+ PINMUX_DATA(SDHID1_2_PU_MARK, PORT261_FN1, PORT261_IN_PU),
+ PINMUX_DATA(SDHID1_3_PU_MARK, PORT262_FN1, PORT262_IN_PU),
+ PINMUX_DATA(SDHICMD1_PU_MARK, PORT263_FN1, PORT263_IN_PU),
+ PINMUX_DATA(SDHID2_0_PU_MARK, PORT265_FN1, PORT265_IN_PU),
+ PINMUX_DATA(SDHID2_1_PU_MARK, PORT266_FN1, PORT266_IN_PU),
+ PINMUX_DATA(SDHID2_2_PU_MARK, PORT267_FN1, PORT267_IN_PU),
+ PINMUX_DATA(SDHID2_3_PU_MARK, PORT268_FN1, PORT268_IN_PU),
+ PINMUX_DATA(SDHICMD2_PU_MARK, PORT269_FN1, PORT269_IN_PU),
PINMUX_DATA(MMCCMD0_PU_MARK, PORT279_FN1, PORT279_IN_PU,
MSEL4CR_MSEL15_0),
- PINMUX_DATA(MMCCMD1_PU_MARK, PORT297_FN2, PORT279_IN_PU,
+ PINMUX_DATA(MMCCMD1_PU_MARK, PORT297_FN2, PORT297_IN_PU,
MSEL4CR_MSEL15_1),
+
+ PINMUX_DATA(MMCD0_0_PU_MARK,
+ PORT271_FN1, PORT271_IN_PU, MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_1_PU_MARK,
+ PORT272_FN1, PORT272_IN_PU, MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_2_PU_MARK,
+ PORT273_FN1, PORT273_IN_PU, MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_3_PU_MARK,
+ PORT274_FN1, PORT274_IN_PU, MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_4_PU_MARK,
+ PORT275_FN1, PORT275_IN_PU, MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_5_PU_MARK,
+ PORT276_FN1, PORT276_IN_PU, MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_6_PU_MARK,
+ PORT277_FN1, PORT277_IN_PU, MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_7_PU_MARK,
+ PORT278_FN1, PORT278_IN_PU, MSEL4CR_MSEL15_0),
+
+ PINMUX_DATA(FSIBISLD_PU_MARK, PORT39_FN1, PORT39_IN_PU),
PINMUX_DATA(FSIACK_PU_MARK, PORT49_FN1, PORT49_IN_PU),
PINMUX_DATA(FSIAILR_PU_MARK, PORT50_FN5, PORT50_IN_PU),
PINMUX_DATA(FSIAIBT_PU_MARK, PORT51_FN5, PORT51_IN_PU),
PINMUX_DATA(FSIAISLD_PU_MARK, PORT55_FN1, PORT55_IN_PU),
};
-#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
-#define GPIO_PORT_310() _310(_GPIO_PORT, , unused)
-#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
-
static struct pinmux_gpio pinmux_gpios[] = {
- GPIO_PORT_310(),
+ GPIO_PORT_ALL(),
/* Table 25-1 (Functions 0-7) */
GPIO_FN(VBUS_0),
GPIO_FN(KEYIN5_PU),
GPIO_FN(KEYIN6_PU),
GPIO_FN(KEYIN7_PU),
+ GPIO_FN(SDHICD0_PU),
+ GPIO_FN(SDHID0_0_PU),
+ GPIO_FN(SDHID0_1_PU),
+ GPIO_FN(SDHID0_2_PU),
+ GPIO_FN(SDHID0_3_PU),
+ GPIO_FN(SDHICMD0_PU),
+ GPIO_FN(SDHIWP0_PU),
GPIO_FN(SDHID1_0_PU),
GPIO_FN(SDHID1_1_PU),
GPIO_FN(SDHID1_2_PU),
GPIO_FN(SDHID1_3_PU),
GPIO_FN(SDHICMD1_PU),
+ GPIO_FN(SDHID2_0_PU),
+ GPIO_FN(SDHID2_1_PU),
+ GPIO_FN(SDHID2_2_PU),
+ GPIO_FN(SDHID2_3_PU),
+ GPIO_FN(SDHICMD2_PU),
GPIO_FN(MMCCMD0_PU),
GPIO_FN(MMCCMD1_PU),
+ GPIO_FN(MMCD0_0_PU),
+ GPIO_FN(MMCD0_1_PU),
+ GPIO_FN(MMCD0_2_PU),
+ GPIO_FN(MMCD0_3_PU),
+ GPIO_FN(MMCD0_4_PU),
+ GPIO_FN(MMCD0_5_PU),
+ GPIO_FN(MMCD0_6_PU),
+ GPIO_FN(MMCD0_7_PU),
GPIO_FN(FSIACK_PU),
GPIO_FN(FSIAILR_PU),
GPIO_FN(FSIAIBT_PU),
GPIO_FN(FSIAISLD_PU),
};
-#define PORTCR(nr, reg) \
- { PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
- 0, \
- /*0001*/ PORT##nr##_OUT , \
- /*0010*/ PORT##nr##_IN , 0, 0, 0, 0, 0, 0, 0, \
- /*1010*/ PORT##nr##_IN_PD, 0, 0, 0, \
- /*1110*/ PORT##nr##_IN_PU, 0, \
- PORT##nr##_FN0, PORT##nr##_FN1, PORT##nr##_FN2, \
- PORT##nr##_FN3, PORT##nr##_FN4, PORT##nr##_FN5, \
- PORT##nr##_FN6, PORT##nr##_FN7, 0, 0, 0, 0, 0, 0, 0, 0 } \
- }
-
static struct pinmux_cfg_reg pinmux_config_regs[] = {
PORTCR(0, 0xe6050000), /* PORT0CR */
PORTCR(1, 0xe6050001), /* PORT1CR */
{ },
};
+/* IRQ pins through INTCS with IRQ0->15 from 0x200 and IRQ16-31 from 0x3200 */
+#define EXT_IRQ16L(n) intcs_evt2irq(0x200 + ((n) << 5))
+#define EXT_IRQ16H(n) intcs_evt2irq(0x3200 + ((n - 16) << 5))
+
+static struct pinmux_irq pinmux_irqs[] = {
+ PINMUX_IRQ(EXT_IRQ16H(19), PORT9_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(1), PORT10_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(0), PORT11_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(18), PORT13_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(20), PORT14_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(21), PORT15_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(31), PORT26_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(30), PORT27_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(29), PORT28_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(22), PORT40_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(23), PORT53_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(10), PORT54_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(9), PORT56_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(26), PORT115_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(27), PORT116_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(28), PORT117_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(24), PORT118_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(6), PORT147_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(2), PORT149_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(7), PORT150_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(12), PORT156_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(4), PORT159_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(25), PORT164_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(8), PORT223_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(3), PORT224_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(5), PORT227_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(17), PORT234_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(11), PORT238_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(13), PORT239_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(16), PORT249_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(14), PORT251_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(9), PORT308_FN0),
+};
+
static struct pinmux_info sh73a0_pinmux_info = {
.name = "sh73a0_pfc",
.reserved_id = PINMUX_RESERVED,
.gpio_data = pinmux_data,
.gpio_data_size = ARRAY_SIZE(pinmux_data),
+
+ .gpio_irq = pinmux_irqs,
+ .gpio_irq_size = ARRAY_SIZE(pinmux_irqs),
};
void sh73a0_pinmux_init(void)
#include <asm/mach-types.h>
#include <mach/common.h>
+#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2())
+
static unsigned int __init shmobile_smp_get_core_count(void)
{
- if (machine_is_ag5evm())
+ if (is_sh73a0())
return sh73a0_get_core_count();
return 1;
static void __init shmobile_smp_prepare_cpus(void)
{
- if (machine_is_ag5evm())
+ if (is_sh73a0())
sh73a0_smp_prepare_cpus();
}
{
trace_hardirqs_off();
- if (machine_is_ag5evm())
+ if (is_sh73a0())
sh73a0_secondary_init(cpu);
}
int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
{
- if (machine_is_ag5evm())
+ if (is_sh73a0())
return sh73a0_boot_secondary(cpu);
return -ENOSYS;
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/bitrev.h>
+#include <linux/console.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/tlbflush.h>
return 0;
}
-static int pd_power_up(struct generic_pm_domain *genpd)
+static int __pd_power_up(struct sh7372_pm_domain *sh7372_pd, bool do_resume)
{
- struct sh7372_pm_domain *sh7372_pd = to_sh7372_pd(genpd);
unsigned int mask = 1 << sh7372_pd->bit_shift;
unsigned int retry_count;
int ret = 0;
for (retry_count = 2 * PSTR_RETRIES; retry_count; retry_count--) {
if (!(__raw_readl(SWUCR) & mask))
- goto out;
+ break;
if (retry_count > PSTR_RETRIES)
udelay(PSTR_DELAY_US);
else
cpu_relax();
}
- if (__raw_readl(SWUCR) & mask)
+ if (!retry_count)
ret = -EIO;
if (!sh7372_pd->no_debug)
mask, __raw_readl(PSTR));
out:
- if (ret == 0 && sh7372_pd->resume)
+ if (ret == 0 && sh7372_pd->resume && do_resume)
sh7372_pd->resume();
return ret;
}
+static int pd_power_up(struct generic_pm_domain *genpd)
+{
+ return __pd_power_up(to_sh7372_pd(genpd), true);
+}
+
static void sh7372_a4r_suspend(void)
{
sh7372_intcs_suspend();
genpd->active_wakeup = pd_active_wakeup;
genpd->power_off = pd_power_down;
genpd->power_on = pd_power_up;
- genpd->power_on(&sh7372_pd->genpd);
+ __pd_power_up(sh7372_pd, false);
}
void sh7372_add_device_to_domain(struct sh7372_pm_domain *sh7372_pd,
.no_debug = true,
};
+static void sh7372_a3sp_init(void)
+{
+ /* serial consoles make use of SCIF hardware located in A3SP,
+ * keep such power domain on if "no_console_suspend" is set.
+ */
+ sh7372_a3sp.stay_on = !console_suspend_enabled;
+}
+
struct sh7372_pm_domain sh7372_a3sg = {
.bit_shift = 13,
};
-#endif /* CONFIG_PM */
+#else /* !CONFIG_PM */
+
+static inline void sh7372_a3sp_init(void) {}
+
+#endif /* !CONFIG_PM */
#if defined(CONFIG_SUSPEND) || defined(CONFIG_CPU_IDLE)
static int sh7372_do_idle_core_standby(unsigned long unused)
#ifdef CONFIG_CPU_IDLE
-static void sh7372_cpuidle_setup(struct cpuidle_device *dev)
+static void sh7372_cpuidle_setup(struct cpuidle_driver *drv)
{
- struct cpuidle_state *state;
- int i = dev->state_count;
+ struct cpuidle_state *state = &drv->states[drv->state_count];
- state = &dev->states[i];
snprintf(state->name, CPUIDLE_NAME_LEN, "C2");
strncpy(state->desc, "Core Standby Mode", CPUIDLE_DESC_LEN);
state->exit_latency = 10;
state->target_residency = 20 + 10;
- state->power_usage = 1; /* perhaps not */
- state->flags = 0;
- state->flags |= CPUIDLE_FLAG_TIME_VALID;
- shmobile_cpuidle_modes[i] = sh7372_enter_core_standby;
+ state->flags = CPUIDLE_FLAG_TIME_VALID;
+ shmobile_cpuidle_modes[drv->state_count] = sh7372_enter_core_standby;
- dev->state_count = i + 1;
+ drv->state_count++;
}
static void sh7372_cpuidle_init(void)
/* do not convert A3SM, A3SP, A3SG, A4R power down into A4S */
__raw_writel(0, PDNSEL);
+ sh7372_a3sp_init();
+
sh7372_suspend_init();
sh7372_cpuidle_init();
}
+++ /dev/null
-/*
- * arch/arm/mach-shmobile/pm_runtime.c
- *
- * Runtime PM support code for SuperH Mobile ARM
- *
- * Copyright (C) 2009-2010 Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/pm_runtime.h>
-#include <linux/pm_domain.h>
-#include <linux/pm_clock.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/sh_clk.h>
-#include <linux/bitmap.h>
-#include <linux/slab.h>
-
-#ifdef CONFIG_PM_RUNTIME
-
-static int default_platform_runtime_idle(struct device *dev)
-{
- /* suspend synchronously to disable clocks immediately */
- return pm_runtime_suspend(dev);
-}
-
-static struct dev_pm_domain default_pm_domain = {
- .ops = {
- .runtime_suspend = pm_clk_suspend,
- .runtime_resume = pm_clk_resume,
- .runtime_idle = default_platform_runtime_idle,
- USE_PLATFORM_PM_SLEEP_OPS
- },
-};
-
-#define DEFAULT_PM_DOMAIN_PTR (&default_pm_domain)
-
-#else
-
-#define DEFAULT_PM_DOMAIN_PTR NULL
-
-#endif /* CONFIG_PM_RUNTIME */
-
-static struct pm_clk_notifier_block platform_bus_notifier = {
- .pm_domain = DEFAULT_PM_DOMAIN_PTR,
- .con_ids = { NULL, },
-};
-
-static int __init sh_pm_runtime_init(void)
-{
- pm_clk_add_notifier(&platform_bus_type, &platform_bus_notifier);
- return 0;
-}
-core_initcall(sh_pm_runtime_init);
-
-static int __init sh_pm_runtime_late_init(void)
-{
- pm_genpd_poweroff_unused();
- return 0;
-}
-late_initcall(sh_pm_runtime_late_init);
tegra_clk_init_from_table(tegra_dt_clk_init_table);
+ /*
+ * Finished with the static registrations now; fill in the missing
+ * devices
+ */
+ of_platform_populate(NULL, tegra_dt_match_table,
+ tegra20_auxdata_lookup, NULL);
+
for (i = 0; i < ARRAY_SIZE(pinmux_configs); i++) {
if (of_machine_is_compatible(pinmux_configs[i].machine)) {
pinmux_configs[i].init();
WARN(i == ARRAY_SIZE(pinmux_configs),
"Unknown platform! Pinmuxing not initialized\n");
-
- /*
- * Finished with the static registrations now; fill in the missing
- * devices
- */
- of_platform_populate(NULL, tegra_dt_match_table, tegra20_auxdata_lookup, NULL);
}
static const char * tegra_dt_board_compat[] = {
#include <linux/kernel.h>
#include <linux/gpio.h>
+#include <linux/of.h>
+
#include <mach/pinmux.h>
#include "gpio-names.h"
void harmony_pinmux_init(void)
{
- platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+ if (!of_machine_is_compatible("nvidia,tegra20"))
+ platform_add_devices(pinmux_devices,
+ ARRAY_SIZE(pinmux_devices));
tegra_pinmux_config_table(harmony_pinmux, ARRAY_SIZE(harmony_pinmux));
#include <linux/kernel.h>
#include <linux/gpio.h>
+#include <linux/of.h>
+
#include <mach/pinmux.h>
#include "gpio-names.h"
void paz00_pinmux_init(void)
{
- platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+ if (!of_machine_is_compatible("nvidia,tegra20"))
+ platform_add_devices(pinmux_devices,
+ ARRAY_SIZE(pinmux_devices));
tegra_pinmux_config_table(paz00_pinmux, ARRAY_SIZE(paz00_pinmux));
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/gpio.h>
+#include <linux/of.h>
#include <mach/pinmux.h>
#include <mach/pinmux-t2.h>
{ .gpio = TEGRA_GPIO_SD2_POWER, .enable = true },
{ .gpio = TEGRA_GPIO_LIDSWITCH, .enable = true },
{ .gpio = TEGRA_GPIO_POWERKEY, .enable = true },
+ { .gpio = TEGRA_GPIO_HP_DET, .enable = true },
{ .gpio = TEGRA_GPIO_ISL29018_IRQ, .enable = true },
{ .gpio = TEGRA_GPIO_CDC_IRQ, .enable = true },
{ .gpio = TEGRA_GPIO_USB1, .enable = true },
void __init seaboard_common_pinmux_init(void)
{
- platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+ if (!of_machine_is_compatible("nvidia,tegra20"))
+ platform_add_devices(pinmux_devices,
+ ARRAY_SIZE(pinmux_devices));
tegra_pinmux_config_table(seaboard_pinmux, ARRAY_SIZE(seaboard_pinmux));
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/of.h>
#include <mach/pinmux.h>
void __init trimslice_pinmux_init(void)
{
- platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+ if (!of_machine_is_compatible("nvidia,tegra20"))
+ platform_add_devices(pinmux_devices,
+ ARRAY_SIZE(pinmux_devices));
tegra_pinmux_config_table(trimslice_pinmux, ARRAY_SIZE(trimslice_pinmux));
tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
}
#include <linux/irq.h>
#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/export.h>
#include <asm/sizes.h>
#include <asm/mach/pci.h>
/* LCD controller*/
-static struct nuc900fb_display __initdata nuc900_lcd_info[] = {
+static struct nuc900fb_display nuc900_lcd_info[] = {
/* Giantplus Technology GPM1040A0 320x240 Color TFT LCD */
[0] = {
.type = LCM_DCCS_VA_SRC_RGB565,
},
};
-static struct nuc900fb_mach_info nuc900_fb_info __initdata = {
+static struct nuc900fb_mach_info nuc900_fb_info = {
#if defined(CONFIG_GPM1040A0_320X240)
.displays = &nuc900_lcd_info[0],
#else
extern void mfp_set_groupf(struct device *dev);
extern void mfp_set_groupc(struct device *dev);
extern void mfp_set_groupi(struct device *dev);
-extern void mfp_set_groupg(struct device *dev);
+extern void mfp_set_groupg(struct device *dev, const char *subname);
+extern void mfp_set_groupd(struct device *dev, const char *subname);
#endif /* __ASM_ARCH_MFP_H */
#ifndef __ASM_ARCH_SPI_H
#define __ASM_ARCH_SPI_H
-extern void mfp_set_groupg(struct device *dev);
+extern void mfp_set_groupg(struct device *dev, const char *subname);
struct nuc900_spi_info {
unsigned int num_cs;
#define REG_MFSEL (W90X900_VA_GCR + 0xC)
#define GPSELF (0x01 << 1)
-
#define GPSELC (0x03 << 2)
-#define ENKPI (0x02 << 2)
-#define ENNAND (0x01 << 2)
+#define GPSELD (0x0f << 4)
#define GPSELEI0 (0x01 << 26)
#define GPSELEI1 (0x01 << 27)
#define GPIOG0TO1 (0x03 << 14)
#define GPIOG2TO3 (0x03 << 16)
#define GPIOG22TO23 (0x03 << 22)
+#define GPIOG18TO20 (0x07 << 18)
#define ENSPI (0x0a << 14)
#define ENI2C0 (0x01 << 14)
#define ENI2C1 (0x01 << 16)
#define ENAC97 (0x02 << 22)
+#define ENSD1 (0x02 << 18)
+#define ENSD0 (0x0a << 4)
+#define ENKPI (0x02 << 2)
+#define ENNAND (0x01 << 2)
static DEFINE_MUTEX(mfp_mutex);
}
EXPORT_SYMBOL(mfp_set_groupi);
-void mfp_set_groupg(struct device *dev)
+void mfp_set_groupg(struct device *dev, const char *subname)
{
unsigned long mfpen;
const char *dev_id;
- BUG_ON(!dev);
+ BUG_ON((!dev) && (!subname));
mutex_lock(&mfp_mutex);
- dev_id = dev_name(dev);
+ if (subname != NULL)
+ dev_id = subname;
+ else
+ dev_id = dev_name(dev);
mfpen = __raw_readl(REG_MFSEL);
} else if (strcmp(dev_id, "nuc900-audio") == 0) {
mfpen &= ~(GPIOG22TO23);
mfpen |= ENAC97;/*enable AC97*/
+ } else if (strcmp(dev_id, "nuc900-mmc-port1") == 0) {
+ mfpen &= ~(GPIOG18TO20);
+ mfpen |= (ENSD1 | 0x01);/*enable sd1*/
} else {
mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);/*GPIOG[3:0]*/
}
}
EXPORT_SYMBOL(mfp_set_groupg);
+void mfp_set_groupd(struct device *dev, const char *subname)
+{
+ unsigned long mfpen;
+ const char *dev_id;
+
+ BUG_ON((!dev) && (!subname));
+
+ mutex_lock(&mfp_mutex);
+
+ if (subname != NULL)
+ dev_id = subname;
+ else
+ dev_id = dev_name(dev);
+
+ mfpen = __raw_readl(REG_MFSEL);
+
+ if (strcmp(dev_id, "nuc900-mmc-port0") == 0) {
+ mfpen &= ~GPSELD;/*enable sd0*/
+ mfpen |= ENSD0;
+ } else
+ mfpen &= (~GPSELD);
+
+ __raw_writel(mfpen, REG_MFSEL);
+
+ mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupd);
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <linux/module.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/mman.h>
+#include <linux/export.h>
#include <linux/nodemask.h>
#include <linux/initrd.h>
#include <linux/of_fdt.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/gpio.h>
+#include <linux/export.h>
#include <asm/hardware/iop3xx.h>
void gpio_line_config(int line, int direction)
#include <linux/io.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
+#include <linux/export.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/sched_clock.h>
config ARCH_IMX_V4_V5
bool "i.MX1, i.MX21, i.MX25, i.MX27"
- select AUTO_ZRELADDR
+ select AUTO_ZRELADDR if !ZBOOT_ROM
select ARM_PATCH_PHYS_VIRT
help
This enables support for systems based on the Freescale i.MX ARMv4
config ARCH_MX5
bool "i.MX50, i.MX51, i.MX53"
- select AUTO_ZRELADDR
+ select AUTO_ZRELADDR if !ZBOOT_ROM
select ARM_PATCH_PHYS_VIRT
help
This enables support for machines using Freescale's i.MX50 and i.MX53
#include <linux/io.h>
#include <mach/common.h>
#include <asm/mach/irq.h>
+#include <asm/exception.h>
#include <mach/hardware.h>
#include "irq-common.h"
if (irqnr == 1023)
break;
- if (irqnr > 29 && irqnr < 1021)
+ if (irqnr > 15 && irqnr < 1021)
handle_IRQ(irqnr, regs);
#ifdef CONFIG_SMP
- else if (irqnr < 16) {
+ else {
writel_relaxed(irqstat, gic_cpu_base_addr +
GIC_CPU_EOI);
handle_IPI(irqnr, regs);
}
-#endif
-#ifdef CONFIG_LOCAL_TIMERS
- else if (irqnr == 29) {
- writel_relaxed(irqstat, gic_cpu_base_addr +
- GIC_CPU_EOI);
- handle_local_timer(regs);
- }
#endif
} while (1);
}
.macro test_for_ipi, irqnr, irqstat, base, tmp
.endm
-
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- .endm
#include <linux/io.h>
#include <asm/mach/irq.h>
+#include <asm/exception.h>
#include <mach/hardware.h>
#include <mach/common.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/errno.h>
+#include <linux/export.h>
#include <linux/err.h>
#include <linux/string.h>
#include <linux/clk.h>
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/module.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/err.h>
NULL, 0, 0);
WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name);
- return PTR_ERR(pdev);
+ return PTR_RET(pdev);
}
#else
static inline int omap2_i2c_add_bus(int bus_id)
/*
* Runtime detection of OMAP3 features
+ *
+ * OMAP3_HAS_IO_CHAIN_CTRL: Some later members of the OMAP3 chip
+ * family have OS-level control over the I/O chain clock. This is
+ * to avoid a window during which wakeups could potentially be lost
+ * during powerdomain transitions. If this bit is set, it
+ * indicates that the chip does support OS-level control of this
+ * feature.
*/
extern u32 omap_features;
#define OMAP3_HAS_192MHZ_CLK BIT(5)
#define OMAP3_HAS_IO_WAKEUP BIT(6)
#define OMAP3_HAS_SDRC BIT(7)
-#define OMAP4_HAS_MPU_1GHZ BIT(8)
-#define OMAP4_HAS_MPU_1_2GHZ BIT(9)
-#define OMAP4_HAS_MPU_1_5GHZ BIT(10)
+#define OMAP3_HAS_IO_CHAIN_CTRL BIT(8)
+#define OMAP4_HAS_MPU_1GHZ BIT(9)
+#define OMAP4_HAS_MPU_1_2GHZ BIT(10)
+#define OMAP4_HAS_MPU_1_5GHZ BIT(11)
#define OMAP3_HAS_FEATURE(feat,flag) \
OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK)
OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP)
OMAP3_HAS_FEATURE(sdrc, SDRC)
+OMAP3_HAS_FEATURE(io_chain_ctrl, IO_CHAIN_CTRL)
/*
* Runtime detection of OMAP4 features
*/
-extern u32 omap_features;
-
#define OMAP4_HAS_FEATURE(feat, flag) \
static inline unsigned int omap4_has_ ##feat(void) \
{ \
bool loses_context;
- u32 (*get_context_loss_count)(struct device *dev);
+ int (*get_context_loss_count)(struct device *dev);
};
struct omap_dm_timer *omap_dm_timer_request(void);
struct platform_device *pdev;
struct list_head node;
- u32 (*get_context_loss_count)(struct device *dev);
+ int (*get_context_loss_count)(struct device *dev);
};
int omap_dm_timer_prepare(struct omap_dm_timer *timer);
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/omap-alsa.h
- *
- * Alsa Driver for AIC23 and TSC2101 codecs on OMAP platform boards.
- *
- * Copyright (C) 2006 Mika Laitio <lamikr@cc.jyu.fi>
- *
- * Copyright (C) 2005 Instituto Nokia de Tecnologia - INdT - Manaus Brazil
- * Written by Daniel Petrini, David Cohen, Anderson Briglia
- * {daniel.petrini, david.cohen, anderson.briglia}@indt.org.br
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * History
- * -------
- *
- * 2005/07/25 INdT-10LE Kernel Team - Alsa driver for omap osk,
- * original version based in sa1100 driver
- * and omap oss driver.
- */
-
-#ifndef __OMAP_ALSA_H
-#define __OMAP_ALSA_H
-
-#include <plat/dma.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <plat/mcbsp.h>
-#include <linux/platform_device.h>
-
-#define DMA_BUF_SIZE (1024 * 8)
-
-/*
- * Buffer management for alsa and dma
- */
-struct audio_stream {
- char *id; /* identification string */
- int stream_id; /* numeric identification */
- int dma_dev; /* dma number of that device */
- int *lch; /* Chain of channels this stream is linked to */
- char started; /* to store if the chain was started or not */
- int dma_q_head; /* DMA Channel Q Head */
- int dma_q_tail; /* DMA Channel Q Tail */
- char dma_q_count; /* DMA Channel Q Count */
- int active:1; /* we are using this stream for transfer now */
- int period; /* current transfer period */
- int periods; /* current count of periods registerd in the DMA engine */
- spinlock_t dma_lock; /* for locking in DMA operations */
- struct snd_pcm_substream *stream; /* the pcm stream */
- unsigned linked:1; /* dma channels linked */
- int offset; /* store start position of the last period in the alsa buffer */
- int (*hw_start)(void); /* interface to start HW interface, e.g. McBSP */
- int (*hw_stop)(void); /* interface to stop HW interface, e.g. McBSP */
-};
-
-/*
- * Alsa card structure for aic23
- */
-struct snd_card_omap_codec {
- struct snd_card *card;
- struct snd_pcm *pcm;
- long samplerate;
- struct audio_stream s[2]; /* playback & capture */
-};
-
-/* Codec specific information and function pointers.
- * Codec (omap-alsa-aic23.c and omap-alsa-tsc2101.c)
- * are responsible for defining the function pointers.
- */
-struct omap_alsa_codec_config {
- char *name;
- struct omap_mcbsp_reg_cfg *mcbsp_regs_alsa;
- struct snd_pcm_hw_constraint_list *hw_constraints_rates;
- struct snd_pcm_hardware *snd_omap_alsa_playback;
- struct snd_pcm_hardware *snd_omap_alsa_capture;
- void (*codec_configure_dev)(void);
- void (*codec_set_samplerate)(long);
- void (*codec_clock_setup)(void);
- int (*codec_clock_on)(void);
- int (*codec_clock_off)(void);
- int (*get_default_samplerate)(void);
-};
-
-/*********** Mixer function prototypes *************************/
-int snd_omap_mixer(struct snd_card_omap_codec *);
-void snd_omap_init_mixer(void);
-
-#ifdef CONFIG_PM
-void snd_omap_suspend_mixer(void);
-void snd_omap_resume_mixer(void);
-#endif
-
-int snd_omap_alsa_post_probe(struct platform_device *pdev, struct omap_alsa_codec_config *config);
-int snd_omap_alsa_remove(struct platform_device *pdev);
-#ifdef CONFIG_PM
-int snd_omap_alsa_suspend(struct platform_device *pdev, pm_message_t state);
-int snd_omap_alsa_resume(struct platform_device *pdev);
-#else
-#define snd_omap_alsa_suspend NULL
-#define snd_omap_alsa_resume NULL
-#endif
-
-void callback_omap_alsa_sound_dma(void *);
-
-#endif
* driver must restore device context. If the number of context losses
* exceeds the maximum positive integer, the function will wrap to 0 and
* continue counting. Returns the number of context losses for this device,
- * or zero upon error.
+ * or negative value upon error.
*/
-u32 omap_pm_get_dev_context_loss_count(struct device *dev);
+int omap_pm_get_dev_context_loss_count(struct device *dev);
void omap_pm_enable_off_mode(void);
void omap_pm_disable_off_mode(void);
int omap_device_align_pm_lat(struct platform_device *pdev,
u32 new_wakeup_lat_limit);
struct powerdomain *omap_device_get_pwrdm(struct omap_device *od);
-u32 omap_device_get_context_loss_count(struct platform_device *pdev);
+int omap_device_get_context_loss_count(struct platform_device *pdev);
/* Other */
void *user);
int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state);
-u32 omap_hwmod_get_context_loss_count(struct omap_hwmod *oh);
+int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh);
int omap_hwmod_no_setup_reset(struct omap_hwmod *oh);
#include <linux/kfifo.h>
#include <linux/err.h>
#include <linux/notifier.h>
+#include <linux/module.h>
#include <plat/mailbox.h>
#include <plat/omap_device.h>
static bool off_mode_enabled;
-static u32 dummy_context_loss_counter;
+static int dummy_context_loss_counter;
/*
* Device-driver-originated constraints (via board-*.c files)
#ifdef CONFIG_ARCH_OMAP2PLUS
-u32 omap_pm_get_dev_context_loss_count(struct device *dev)
+int omap_pm_get_dev_context_loss_count(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
- u32 count;
+ int count;
if (WARN_ON(!dev))
- return 0;
+ return -ENODEV;
if (dev->parent == &omap_device_parent) {
count = omap_device_get_context_loss_count(pdev);
} else {
WARN_ONCE(off_mode_enabled, "omap_pm: using dummy context loss counter; device %s should be converted to omap_device",
dev_name(dev));
- if (off_mode_enabled)
- dummy_context_loss_counter++;
+
count = dummy_context_loss_counter;
+
+ if (off_mode_enabled) {
+ count++;
+ /*
+ * Context loss count has to be a non-negative value.
+ * Clear the sign bit to get a value range from 0 to
+ * INT_MAX.
+ */
+ count &= INT_MAX;
+ dummy_context_loss_counter = count;
+ }
}
pr_debug("OMAP PM: context loss count for dev %s = %d\n",
#else
-u32 omap_pm_get_dev_context_loss_count(struct device *dev)
+int omap_pm_get_dev_context_loss_count(struct device *dev)
{
return dummy_context_loss_counter;
}
#undef DEBUG
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/err.h>
* return the context loss counter for that hwmod, otherwise return
* zero.
*/
-u32 omap_device_get_context_loss_count(struct platform_device *pdev)
+int omap_device_get_context_loss_count(struct platform_device *pdev)
{
struct omap_device *od;
u32 ret = 0;
struct pxa3xx_nand_timing *timing; /* NAND Flash timing */
};
+/*
+ * Current pxa3xx_nand controller has two chip select which
+ * both be workable.
+ *
+ * Notice should be taken that:
+ * When you want to use this feature, you should not enable the
+ * keep configuration feature, for two chip select could be
+ * attached with different nand chip. The different page size
+ * and timing requirement make the keep configuration impossible.
+ */
+
+/* The max num of chip select current support */
+#define NUM_CHIP_SELECT (2)
struct pxa3xx_nand_platform_data {
/* the data flash bus is shared between the Static Memory
/* allow platform code to keep OBM/bootloader defined NFC config */
int keep_config;
- const struct mtd_partition *parts;
- unsigned int nr_parts;
+ /* indicate how many chip selects will be used */
+ int num_cs;
+
+ const struct mtd_partition *parts[NUM_CHIP_SELECT];
+ unsigned int nr_parts[NUM_CHIP_SELECT];
const struct pxa3xx_nand_flash * flash;
size_t num_flash;
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
select S3C_DEV_NAND
- select S3C_GPIO_CFG_S3C24XX
help
Base platform code for any Samsung S3C24XX device
obj-y += cpu.o
obj-y += irq.o
-obj-y += devs.o
-obj-y += gpio.o
-obj-y += gpiolib.o
+obj-y += dev-uart.o
obj-y += clock.o
obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o
--- /dev/null
+/* linux/arch/arm/plat-s3c24xx/dev-uart.c
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Base S3C24XX UART resource and platform device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+#include <plat/regs-serial.h>
+
+/* Serial port registrations */
+
+static struct resource s3c2410_uart0_resource[] = {
+ [0] = {
+ .start = S3C2410_PA_UART0,
+ .end = S3C2410_PA_UART0 + 0x3fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S3CUART_RX0,
+ .end = IRQ_S3CUART_ERR0,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct resource s3c2410_uart1_resource[] = {
+ [0] = {
+ .start = S3C2410_PA_UART1,
+ .end = S3C2410_PA_UART1 + 0x3fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S3CUART_RX1,
+ .end = IRQ_S3CUART_ERR1,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct resource s3c2410_uart2_resource[] = {
+ [0] = {
+ .start = S3C2410_PA_UART2,
+ .end = S3C2410_PA_UART2 + 0x3fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S3CUART_RX2,
+ .end = IRQ_S3CUART_ERR2,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct resource s3c2410_uart3_resource[] = {
+ [0] = {
+ .start = S3C2443_PA_UART3,
+ .end = S3C2443_PA_UART3 + 0x3fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S3CUART_RX3,
+ .end = IRQ_S3CUART_ERR3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
+ [0] = {
+ .resources = s3c2410_uart0_resource,
+ .nr_resources = ARRAY_SIZE(s3c2410_uart0_resource),
+ },
+ [1] = {
+ .resources = s3c2410_uart1_resource,
+ .nr_resources = ARRAY_SIZE(s3c2410_uart1_resource),
+ },
+ [2] = {
+ .resources = s3c2410_uart2_resource,
+ .nr_resources = ARRAY_SIZE(s3c2410_uart2_resource),
+ },
+ [3] = {
+ .resources = s3c2410_uart3_resource,
+ .nr_resources = ARRAY_SIZE(s3c2410_uart3_resource),
+ },
+};
+++ /dev/null
-/* linux/arch/arm/plat-s3c24xx/devs.c
- *
- * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Base S3C24XX platform device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <mach/fb.h>
-#include <mach/hardware.h>
-#include <mach/dma.h>
-#include <mach/irqs.h>
-#include <asm/irq.h>
-
-#include <plat/regs-serial.h>
-#include <plat/udc.h>
-#include <plat/mci.h>
-
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/regs-spi.h>
-#include <plat/ts.h>
-
-/* Serial port registrations */
-
-static struct resource s3c2410_uart0_resource[] = {
- [0] = {
- .start = S3C2410_PA_UART0,
- .end = S3C2410_PA_UART0 + 0x3fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX0,
- .end = IRQ_S3CUART_ERR0,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct resource s3c2410_uart1_resource[] = {
- [0] = {
- .start = S3C2410_PA_UART1,
- .end = S3C2410_PA_UART1 + 0x3fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX1,
- .end = IRQ_S3CUART_ERR1,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct resource s3c2410_uart2_resource[] = {
- [0] = {
- .start = S3C2410_PA_UART2,
- .end = S3C2410_PA_UART2 + 0x3fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX2,
- .end = IRQ_S3CUART_ERR2,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct resource s3c2410_uart3_resource[] = {
- [0] = {
- .start = S3C2443_PA_UART3,
- .end = S3C2443_PA_UART3 + 0x3fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX3,
- .end = IRQ_S3CUART_ERR3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
- [0] = {
- .resources = s3c2410_uart0_resource,
- .nr_resources = ARRAY_SIZE(s3c2410_uart0_resource),
- },
- [1] = {
- .resources = s3c2410_uart1_resource,
- .nr_resources = ARRAY_SIZE(s3c2410_uart1_resource),
- },
- [2] = {
- .resources = s3c2410_uart2_resource,
- .nr_resources = ARRAY_SIZE(s3c2410_uart2_resource),
- },
- [3] = {
- .resources = s3c2410_uart3_resource,
- .nr_resources = ARRAY_SIZE(s3c2410_uart3_resource),
- },
-};
-
-/* LCD Controller */
-
-static struct resource s3c_lcd_resource[] = {
- [0] = {
- .start = S3C24XX_PA_LCD,
- .end = S3C24XX_PA_LCD + S3C24XX_SZ_LCD - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_LCD,
- .end = IRQ_LCD,
- .flags = IORESOURCE_IRQ,
- }
-
-};
-
-static u64 s3c_device_lcd_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_lcd = {
- .name = "s3c2410-lcd",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_lcd_resource),
- .resource = s3c_lcd_resource,
- .dev = {
- .dma_mask = &s3c_device_lcd_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-
-EXPORT_SYMBOL(s3c_device_lcd);
-
-void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
-{
- struct s3c2410fb_mach_info *npd;
-
- npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_lcd);
- if (npd) {
- npd->displays = kmemdup(pd->displays,
- sizeof(struct s3c2410fb_display) * npd->num_displays,
- GFP_KERNEL);
- if (!npd->displays)
- printk(KERN_ERR "no memory for LCD display data\n");
- } else {
- printk(KERN_ERR "no memory for LCD platform data\n");
- }
-}
-
-/* Touchscreen */
-
-static struct resource s3c_ts_resource[] = {
- [0] = {
- .start = S3C24XX_PA_ADC,
- .end = S3C24XX_PA_ADC + S3C24XX_SZ_ADC - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_TC,
- .end = IRQ_TC,
- .flags = IORESOURCE_IRQ,
- },
-
-};
-
-struct platform_device s3c_device_ts = {
- .name = "s3c2410-ts",
- .id = -1,
- .dev.parent = &s3c_device_adc.dev,
- .num_resources = ARRAY_SIZE(s3c_ts_resource),
- .resource = s3c_ts_resource,
-};
-EXPORT_SYMBOL(s3c_device_ts);
-
-void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_info)
-{
- s3c_set_platdata(hard_s3c2410ts_info,
- sizeof(struct s3c2410_ts_mach_info), &s3c_device_ts);
-}
-
-/* USB Device (Gadget)*/
-
-static struct resource s3c_usbgadget_resource[] = {
- [0] = {
- .start = S3C24XX_PA_USBDEV,
- .end = S3C24XX_PA_USBDEV + S3C24XX_SZ_USBDEV - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_USBD,
- .end = IRQ_USBD,
- .flags = IORESOURCE_IRQ,
- }
-
-};
-
-struct platform_device s3c_device_usbgadget = {
- .name = "s3c2410-usbgadget",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_usbgadget_resource),
- .resource = s3c_usbgadget_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_usbgadget);
-
-void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *pd)
-{
- s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usbgadget);
-}
-
-/* USB High Speed 2.0 Device (Gadget) */
-static struct resource s3c_hsudc_resource[] = {
- [0] = {
- .start = S3C2416_PA_HSUDC,
- .end = S3C2416_PA_HSUDC + S3C2416_SZ_HSUDC - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_USBD,
- .end = IRQ_USBD,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static u64 s3c_hsudc_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s3c_device_usb_hsudc = {
- .name = "s3c-hsudc",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_hsudc_resource),
- .resource = s3c_hsudc_resource,
- .dev = {
- .dma_mask = &s3c_hsudc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd)
-{
- s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usb_hsudc);
-}
-
-/* IIS */
-
-static struct resource s3c_iis_resource[] = {
- [0] = {
- .start = S3C24XX_PA_IIS,
- .end = S3C24XX_PA_IIS + S3C24XX_SZ_IIS -1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static u64 s3c_device_iis_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_iis = {
- .name = "s3c24xx-iis",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_iis_resource),
- .resource = s3c_iis_resource,
- .dev = {
- .dma_mask = &s3c_device_iis_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-
-EXPORT_SYMBOL(s3c_device_iis);
-
-/* RTC */
-
-static struct resource s3c_rtc_resource[] = {
- [0] = {
- .start = S3C24XX_PA_RTC,
- .end = S3C24XX_PA_RTC + 0xff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_RTC,
- .end = IRQ_RTC,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_TICK,
- .end = IRQ_TICK,
- .flags = IORESOURCE_IRQ
- }
-};
-
-struct platform_device s3c_device_rtc = {
- .name = "s3c2410-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_rtc_resource),
- .resource = s3c_rtc_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_rtc);
-
-/* ADC */
-
-static struct resource s3c_adc_resource[] = {
- [0] = {
- .start = S3C24XX_PA_ADC,
- .end = S3C24XX_PA_ADC + S3C24XX_SZ_ADC - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_TC,
- .end = IRQ_TC,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_ADC,
- .end = IRQ_ADC,
- .flags = IORESOURCE_IRQ,
- }
-
-};
-
-struct platform_device s3c_device_adc = {
- .name = "s3c24xx-adc",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_adc_resource),
- .resource = s3c_adc_resource,
-};
-
-/* SDI */
-
-static struct resource s3c_sdi_resource[] = {
- [0] = {
- .start = S3C24XX_PA_SDI,
- .end = S3C24XX_PA_SDI + S3C24XX_SZ_SDI - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_SDI,
- .end = IRQ_SDI,
- .flags = IORESOURCE_IRQ,
- }
-
-};
-
-struct platform_device s3c_device_sdi = {
- .name = "s3c2410-sdi",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_sdi_resource),
- .resource = s3c_sdi_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_sdi);
-
-void __init s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata)
-{
- s3c_set_platdata(pdata, sizeof(struct s3c24xx_mci_pdata),
- &s3c_device_sdi);
-}
-
-
-/* SPI (0) */
-
-static struct resource s3c_spi0_resource[] = {
- [0] = {
- .start = S3C24XX_PA_SPI,
- .end = S3C24XX_PA_SPI + 0x1f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_SPI0,
- .end = IRQ_SPI0,
- .flags = IORESOURCE_IRQ,
- }
-
-};
-
-static u64 s3c_device_spi0_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_spi0 = {
- .name = "s3c2410-spi",
- .id = 0,
- .num_resources = ARRAY_SIZE(s3c_spi0_resource),
- .resource = s3c_spi0_resource,
- .dev = {
- .dma_mask = &s3c_device_spi0_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-
-EXPORT_SYMBOL(s3c_device_spi0);
-
-/* SPI (1) */
-
-static struct resource s3c_spi1_resource[] = {
- [0] = {
- .start = S3C24XX_PA_SPI + S3C2410_SPI1,
- .end = S3C24XX_PA_SPI + S3C2410_SPI1 + 0x1f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_SPI1,
- .end = IRQ_SPI1,
- .flags = IORESOURCE_IRQ,
- }
-
-};
-
-static u64 s3c_device_spi1_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_spi1 = {
- .name = "s3c2410-spi",
- .id = 1,
- .num_resources = ARRAY_SIZE(s3c_spi1_resource),
- .resource = s3c_spi1_resource,
- .dev = {
- .dma_mask = &s3c_device_spi1_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-
-EXPORT_SYMBOL(s3c_device_spi1);
-
-#ifdef CONFIG_CPU_S3C2440
-
-/* Camif Controller */
-
-static struct resource s3c_camif_resource[] = {
- [0] = {
- .start = S3C2440_PA_CAMIF,
- .end = S3C2440_PA_CAMIF + S3C2440_SZ_CAMIF - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_CAM,
- .end = IRQ_CAM,
- .flags = IORESOURCE_IRQ,
- }
-
-};
-
-static u64 s3c_device_camif_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_camif = {
- .name = "s3c2440-camif",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_camif_resource),
- .resource = s3c_camif_resource,
- .dev = {
- .dma_mask = &s3c_device_camif_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-
-EXPORT_SYMBOL(s3c_device_camif);
-
-/* AC97 */
-
-static struct resource s3c_ac97_resource[] = {
- [0] = {
- .start = S3C2440_PA_AC97,
- .end = S3C2440_PA_AC97 + S3C2440_SZ_AC97 -1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3C244x_AC97,
- .end = IRQ_S3C244x_AC97,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .name = "PCM out",
- .start = DMACH_PCM_OUT,
- .end = DMACH_PCM_OUT,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .name = "PCM in",
- .start = DMACH_PCM_IN,
- .end = DMACH_PCM_IN,
- .flags = IORESOURCE_DMA,
- },
- [4] = {
- .name = "Mic in",
- .start = DMACH_MIC_IN,
- .end = DMACH_MIC_IN,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static u64 s3c_device_audio_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_ac97 = {
- .name = "samsung-ac97",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_ac97_resource),
- .resource = s3c_ac97_resource,
- .dev = {
- .dma_mask = &s3c_device_audio_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-
-EXPORT_SYMBOL(s3c_device_ac97);
-
-/* ASoC I2S */
-
-struct platform_device s3c2412_device_iis = {
- .name = "s3c2412-iis",
- .id = -1,
- .dev = {
- .dma_mask = &s3c_device_audio_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-
-EXPORT_SYMBOL(s3c2412_device_iis);
-
-#endif // CONFIG_CPU_S32440
+++ /dev/null
-/* linux/arch/arm/plat-s3c24xx/gpio.c
- *
- * Copyright (c) 2004-2010 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX GPIO support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/gpio-fns.h>
-#include <asm/irq.h>
-
-#include <mach/regs-gpio.h>
-
-#include <plat/gpio-core.h>
-
-/* gpiolib wrappers until these are totally eliminated */
-
-void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
-{
- int ret;
-
- WARN_ON(to); /* should be none of these left */
-
- if (!to) {
- /* if pull is enabled, try first with up, and if that
- * fails, try using down */
-
- ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP);
- if (ret)
- s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN);
- } else {
- s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE);
- }
-}
-EXPORT_SYMBOL(s3c2410_gpio_pullup);
-
-void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
-{
- /* do this via gpiolib until all users removed */
-
- gpio_request(pin, "temporary");
- gpio_set_value(pin, to);
- gpio_free(pin);
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_setpin);
-
-unsigned int s3c2410_gpio_getpin(unsigned int pin)
-{
- struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
- unsigned long offs = pin - chip->chip.base;
-
- return __raw_readl(chip->base + 0x04) & (1<< offs);
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_getpin);
-
-unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
-{
- unsigned long flags;
- unsigned long misccr;
-
- local_irq_save(flags);
- misccr = __raw_readl(S3C24XX_MISCCR);
- misccr &= ~clear;
- misccr ^= change;
- __raw_writel(misccr, S3C24XX_MISCCR);
- local_irq_restore(flags);
-
- return misccr;
-}
-
-EXPORT_SYMBOL(s3c2410_modify_misccr);
+++ /dev/null
-/* linux/arch/arm/plat-s3c24xx/gpiolib.c
- *
- * Copyright (c) 2008-2010 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/sysdev.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <plat/pm.h>
-
-#include <mach/regs-gpio.h>
-
-static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
-{
- return -EINVAL;
-}
-
-static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
- void __iomem *base = ourchip->base;
- unsigned long flags;
- unsigned long dat;
- unsigned long con;
-
- local_irq_save(flags);
-
- con = __raw_readl(base + 0x00);
- dat = __raw_readl(base + 0x04);
-
- dat &= ~(1 << offset);
- if (value)
- dat |= 1 << offset;
-
- __raw_writel(dat, base + 0x04);
-
- con &= ~(1 << offset);
-
- __raw_writel(con, base + 0x00);
- __raw_writel(dat, base + 0x04);
-
- local_irq_restore(flags);
- return 0;
-}
-
-static int s3c24xx_gpiolib_bankf_toirq(struct gpio_chip *chip, unsigned offset)
-{
- if (offset < 4)
- return IRQ_EINT0 + offset;
-
- if (offset < 8)
- return IRQ_EINT4 + offset - 4;
-
- return -EINVAL;
-}
-
-static struct s3c_gpio_cfg s3c24xx_gpiocfg_banka = {
- .set_config = s3c_gpio_setcfg_s3c24xx_a,
- .get_config = s3c_gpio_getcfg_s3c24xx_a,
-};
-
-struct s3c_gpio_cfg s3c24xx_gpiocfg_default = {
- .set_config = s3c_gpio_setcfg_s3c24xx,
- .get_config = s3c_gpio_getcfg_s3c24xx,
-};
-
-struct s3c_gpio_chip s3c24xx_gpios[] = {
- [0] = {
- .base = S3C2410_GPACON,
- .pm = __gpio_pm(&s3c_gpio_pm_1bit),
- .config = &s3c24xx_gpiocfg_banka,
- .chip = {
- .base = S3C2410_GPA(0),
- .owner = THIS_MODULE,
- .label = "GPIOA",
- .ngpio = 24,
- .direction_input = s3c24xx_gpiolib_banka_input,
- .direction_output = s3c24xx_gpiolib_banka_output,
- },
- },
- [1] = {
- .base = S3C2410_GPBCON,
- .pm = __gpio_pm(&s3c_gpio_pm_2bit),
- .chip = {
- .base = S3C2410_GPB(0),
- .owner = THIS_MODULE,
- .label = "GPIOB",
- .ngpio = 16,
- },
- },
- [2] = {
- .base = S3C2410_GPCCON,
- .pm = __gpio_pm(&s3c_gpio_pm_2bit),
- .chip = {
- .base = S3C2410_GPC(0),
- .owner = THIS_MODULE,
- .label = "GPIOC",
- .ngpio = 16,
- },
- },
- [3] = {
- .base = S3C2410_GPDCON,
- .pm = __gpio_pm(&s3c_gpio_pm_2bit),
- .chip = {
- .base = S3C2410_GPD(0),
- .owner = THIS_MODULE,
- .label = "GPIOD",
- .ngpio = 16,
- },
- },
- [4] = {
- .base = S3C2410_GPECON,
- .pm = __gpio_pm(&s3c_gpio_pm_2bit),
- .chip = {
- .base = S3C2410_GPE(0),
- .label = "GPIOE",
- .owner = THIS_MODULE,
- .ngpio = 16,
- },
- },
- [5] = {
- .base = S3C2410_GPFCON,
- .pm = __gpio_pm(&s3c_gpio_pm_2bit),
- .chip = {
- .base = S3C2410_GPF(0),
- .owner = THIS_MODULE,
- .label = "GPIOF",
- .ngpio = 8,
- .to_irq = s3c24xx_gpiolib_bankf_toirq,
- },
- },
- [6] = {
- .base = S3C2410_GPGCON,
- .pm = __gpio_pm(&s3c_gpio_pm_2bit),
- .irq_base = IRQ_EINT8,
- .chip = {
- .base = S3C2410_GPG(0),
- .owner = THIS_MODULE,
- .label = "GPIOG",
- .ngpio = 16,
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = S3C2410_GPHCON,
- .pm = __gpio_pm(&s3c_gpio_pm_2bit),
- .chip = {
- .base = S3C2410_GPH(0),
- .owner = THIS_MODULE,
- .label = "GPIOH",
- .ngpio = 11,
- },
- },
- /* GPIOS for the S3C2443 and later devices. */
- {
- .base = S3C2440_GPJCON,
- .pm = __gpio_pm(&s3c_gpio_pm_2bit),
- .chip = {
- .base = S3C2410_GPJ(0),
- .owner = THIS_MODULE,
- .label = "GPIOJ",
- .ngpio = 16,
- },
- }, {
- .base = S3C2443_GPKCON,
- .pm = __gpio_pm(&s3c_gpio_pm_2bit),
- .chip = {
- .base = S3C2410_GPK(0),
- .owner = THIS_MODULE,
- .label = "GPIOK",
- .ngpio = 16,
- },
- }, {
- .base = S3C2443_GPLCON,
- .pm = __gpio_pm(&s3c_gpio_pm_2bit),
- .chip = {
- .base = S3C2410_GPL(0),
- .owner = THIS_MODULE,
- .label = "GPIOL",
- .ngpio = 15,
- },
- }, {
- .base = S3C2443_GPMCON,
- .pm = __gpio_pm(&s3c_gpio_pm_2bit),
- .chip = {
- .base = S3C2410_GPM(0),
- .owner = THIS_MODULE,
- .label = "GPIOM",
- .ngpio = 2,
- },
- },
-};
-
-
-static __init int s3c24xx_gpiolib_init(void)
-{
- struct s3c_gpio_chip *chip = s3c24xx_gpios;
- int gpn;
-
- for (gpn = 0; gpn < ARRAY_SIZE(s3c24xx_gpios); gpn++, chip++) {
- if (!chip->config)
- chip->config = &s3c24xx_gpiocfg_default;
-
- s3c_gpiolib_add(chip);
- }
-
- return 0;
-}
-
-core_initcall(s3c24xx_gpiolib_init);
+++ /dev/null
-#ifndef __MACH_CLKDEV_H__
-#define __MACH_CLKDEV_H__
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do {} while (0)
-
-#endif
+++ /dev/null
-/* linux/arch/arm/plat-s3c24xx/include/mach/pwm-clock.h
- *
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C24xx - pwm clock and timer support
- */
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @cfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
- return tcfg == S3C2410_TCFG1_MUX_TCLK;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
- return 1 << (1 + tcfg1);
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
- return 0;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
- return ilog2(div) - 1;
-}
-
-#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK
+++ /dev/null
-/* arch/arm/plat-s3c24xx/include/plat/audio-simtec.h
- *
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Simtec Audio support.
-*/
-
-/**
- * struct s3c24xx_audio_simtec_pdata - platform data for simtec audio
- * @use_mpllin: Select codec clock from MPLLin
- * @output_cdclk: Need to output CDCLK to the codec
- * @have_mic: Set if we have a MIC socket
- * @have_lout: Set if we have a LineOut socket
- * @amp_gpio: GPIO pin to enable the AMP
- * @amp_gain: Option GPIO to control AMP gain
- */
-struct s3c24xx_audio_simtec_pdata {
- unsigned int use_mpllin:1;
- unsigned int output_cdclk:1;
-
- unsigned int have_mic:1;
- unsigned int have_lout:1;
-
- int amp_gpio;
- int amp_gain[2];
-
- void (*startup)(void);
-};
-
-extern int simtec_audio_add(const char *codec_name, bool has_lr_routing,
- struct s3c24xx_audio_simtec_pdata *pdata);
+++ /dev/null
-/* linux/include/asm-arm/plat-s3c24xx/common-smdk.h
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Common code for SMDK2410 and SMDK2440 boards
- *
- * http://www.fluff.org/ben/smdk2440/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern void smdk_machine_init(void);
+++ /dev/null
-/* arch/arm/plat-s3c/include/plat/cpu-freq.h
- *
- * Copyright (c) 2006-2009 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C CPU frequency scaling support - core support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <plat/cpu-freq.h>
-
-struct seq_file;
-
-#define MAX_BANKS (8)
-#define S3C2412_MAX_IO (8)
-
-/**
- * struct s3c2410_iobank_timing - IO bank timings for S3C2410 style timings
- * @bankcon: The cached version of settings in this structure.
- * @tacp:
- * @tacs: Time from address valid to nCS asserted.
- * @tcos: Time from nCS asserted to nOE or nWE asserted.
- * @tacc: Time that nOE or nWE is asserted.
- * @tcoh: Time nCS is held after nOE or nWE are released.
- * @tcah: Time address is held for after
- * @nwait_en: Whether nWAIT is enabled for this bank.
- *
- * This structure represents the IO timings for a S3C2410 style IO bank
- * used by the CPU frequency support if it needs to change the settings
- * of the IO.
- */
-struct s3c2410_iobank_timing {
- unsigned long bankcon;
- unsigned int tacp;
- unsigned int tacs;
- unsigned int tcos;
- unsigned int tacc;
- unsigned int tcoh; /* nCS hold afrer nOE/nWE */
- unsigned int tcah; /* Address hold after nCS */
- unsigned char nwait_en; /* nWait enabled for bank. */
-};
-
-/**
- * struct s3c2412_iobank_timing - io timings for PL092 (S3C2412) style IO
- * @idcy: The idle cycle time between transactions.
- * @wstrd: nCS release to end of read cycle.
- * @wstwr: nCS release to end of write cycle.
- * @wstoen: nCS assertion to nOE assertion time.
- * @wstwen: nCS assertion to nWE assertion time.
- * @wstbrd: Burst ready delay.
- * @smbidcyr: Register cache for smbidcyr value.
- * @smbwstrd: Register cache for smbwstrd value.
- * @smbwstwr: Register cache for smbwstwr value.
- * @smbwstoen: Register cache for smbwstoen value.
- * @smbwstwen: Register cache for smbwstwen value.
- * @smbwstbrd: Register cache for smbwstbrd value.
- *
- * Timing information for a IO bank on an S3C2412 or similar system which
- * uses a PL093 block.
- */
-struct s3c2412_iobank_timing {
- unsigned int idcy;
- unsigned int wstrd;
- unsigned int wstwr;
- unsigned int wstoen;
- unsigned int wstwen;
- unsigned int wstbrd;
-
- /* register cache */
- unsigned char smbidcyr;
- unsigned char smbwstrd;
- unsigned char smbwstwr;
- unsigned char smbwstoen;
- unsigned char smbwstwen;
- unsigned char smbwstbrd;
-};
-
-union s3c_iobank {
- struct s3c2410_iobank_timing *io_2410;
- struct s3c2412_iobank_timing *io_2412;
-};
-
-/**
- * struct s3c_iotimings - Chip IO timings holder
- * @bank: The timings for each IO bank.
- */
-struct s3c_iotimings {
- union s3c_iobank bank[MAX_BANKS];
-};
-
-/**
- * struct s3c_plltab - PLL table information.
- * @vals: List of PLL values.
- * @size: Size of the PLL table @vals.
- */
-struct s3c_plltab {
- struct s3c_pllval *vals;
- int size;
-};
-
-/**
- * struct s3c_cpufreq_config - current cpu frequency configuration
- * @freq: The current settings for the core clocks.
- * @max: Maxium settings, derived from core, board and user settings.
- * @pll: The PLL table entry for the current PLL settings.
- * @divs: The divisor settings for the core clocks.
- * @info: The current core driver information.
- * @board: The information for the board we are running on.
- * @lock_pll: Set if the PLL settings cannot be changed.
- *
- * This is for the core drivers that need to know information about
- * the current settings and values. It should not be needed by any
- * device drivers.
-*/
-struct s3c_cpufreq_config {
- struct s3c_freq freq;
- struct s3c_freq max;
- struct cpufreq_frequency_table pll;
- struct s3c_clkdivs divs;
- struct s3c_cpufreq_info *info; /* for core, not drivers */
- struct s3c_cpufreq_board *board;
-
- unsigned int lock_pll:1;
-};
-
-/**
- * struct s3c_cpufreq_info - Information for the CPU frequency driver.
- * @name: The name of this implementation.
- * @max: The maximum frequencies for the system.
- * @latency: Transition latency to give to cpufreq.
- * @locktime_m: The lock-time in uS for the MPLL.
- * @locktime_u: The lock-time in uS for the UPLL.
- * @locttime_bits: The number of bits each LOCKTIME field.
- * @need_pll: Set if this driver needs to change the PLL values to achieve
- * any frequency changes. This is really only need by devices like the
- * S3C2410 where there is no or limited divider between the PLL and the
- * ARMCLK.
- * @resume_clocks: Update the clocks on resume.
- * @get_iotiming: Get the current IO timing data, mainly for use at start.
- * @set_iotiming: Update the IO timings from the cached copies calculated
- * from the @calc_iotiming entry when changing the frequency.
- * @calc_iotiming: Calculate and update the cached copies of the IO timings
- * from the newly calculated frequencies.
- * @calc_freqtable: Calculate (fill in) the given frequency table from the
- * current frequency configuration. If the table passed in is NULL,
- * then the return is the number of elements to be filled for allocation
- * of the table.
- * @set_refresh: Set the memory refresh configuration.
- * @set_fvco: Set the PLL frequencies.
- * @set_divs: Update the clock divisors.
- * @calc_divs: Calculate the clock divisors.
- */
-struct s3c_cpufreq_info {
- const char *name;
- struct s3c_freq max;
-
- unsigned int latency;
-
- unsigned int locktime_m;
- unsigned int locktime_u;
- unsigned char locktime_bits;
-
- unsigned int need_pll:1;
-
- /* driver routines */
-
- void (*resume_clocks)(void);
-
- int (*get_iotiming)(struct s3c_cpufreq_config *cfg,
- struct s3c_iotimings *timings);
-
- void (*set_iotiming)(struct s3c_cpufreq_config *cfg,
- struct s3c_iotimings *timings);
-
- int (*calc_iotiming)(struct s3c_cpufreq_config *cfg,
- struct s3c_iotimings *timings);
-
- int (*calc_freqtable)(struct s3c_cpufreq_config *cfg,
- struct cpufreq_frequency_table *t,
- size_t table_size);
-
- void (*debug_io_show)(struct seq_file *seq,
- struct s3c_cpufreq_config *cfg,
- union s3c_iobank *iob);
-
- void (*set_refresh)(struct s3c_cpufreq_config *cfg);
- void (*set_fvco)(struct s3c_cpufreq_config *cfg);
- void (*set_divs)(struct s3c_cpufreq_config *cfg);
- int (*calc_divs)(struct s3c_cpufreq_config *cfg);
-};
-
-extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info);
-
-extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, unsigned int plls_no);
-
-/* exports and utilities for debugfs */
-extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void);
-extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void);
-
-extern void s3c2410_iotiming_debugfs(struct seq_file *seq,
- struct s3c_cpufreq_config *cfg,
- union s3c_iobank *iob);
-
-extern void s3c2412_iotiming_debugfs(struct seq_file *seq,
- struct s3c_cpufreq_config *cfg,
- union s3c_iobank *iob);
-
-#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
-#define s3c_cpufreq_debugfs_call(x) x
-#else
-#define s3c_cpufreq_debugfs_call(x) NULL
-#endif
-
-/* Useful utility functions. */
-
-extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *);
-
-/* S3C2410 and compatible exported functions */
-
-extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg);
-extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
-
-#ifdef CONFIG_S3C2410_IOTIMING
-extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
- struct s3c_iotimings *iot);
-
-extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
- struct s3c_iotimings *timings);
-
-extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
- struct s3c_iotimings *iot);
-#else
-#define s3c2410_iotiming_calc NULL
-#define s3c2410_iotiming_get NULL
-#define s3c2410_iotiming_set NULL
-#endif /* CONFIG_S3C2410_IOTIMING */
-
-/* S3C2412 compatible routines */
-
-extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
- struct s3c_iotimings *timings);
-
-extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
- struct s3c_iotimings *timings);
-
-extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
- struct s3c_iotimings *iot);
-
-extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
- struct s3c_iotimings *iot);
-
-#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
-#define s3c_freq_dbg(x...) printk(KERN_INFO x)
-#else
-#define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0)
-#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUG */
-
-#ifdef CONFIG_CPU_FREQ_S3C24XX_IODEBUG
-#define s3c_freq_iodbg(x...) printk(KERN_INFO x)
-#else
-#define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0)
-#endif /* CONFIG_CPU_FREQ_S3C24XX_IODEBUG */
-
-static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table,
- int index, size_t table_size,
- unsigned int freq)
-{
- if (index < 0)
- return index;
-
- if (table) {
- if (index >= table_size)
- return -ENOMEM;
-
- s3c_freq_dbg("%s: { %d = %u kHz }\n",
- __func__, index, freq);
-
- table[index].index = index;
- table[index].frequency = freq;
- }
-
- return index + 1;
-}
+++ /dev/null
-/* linux/include/asm-arm/plat-s3c24xx/fiq.h
- *
- * Copyright (c) 2009 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C24XX CPU FIQ support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern int s3c24xx_set_fiq(unsigned int irq, bool on);
+++ /dev/null
-/* linux/include/asm-arm/plat-s3c24xx/irq.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C24XX CPU IRQ support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#define irqdbf(x...)
-#define irqdbf2(x...)
-
-#define EXTINT_OFF (IRQ_EINT4 - 4)
-
-/* these are exported for arch/arm/mach-* usage */
-extern struct irq_chip s3c_irq_level_chip;
-extern struct irq_chip s3c_irq_chip;
-
-static inline void
-s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
- int subcheck)
-{
- unsigned long mask;
- unsigned long submask;
-
- submask = __raw_readl(S3C2410_INTSUBMSK);
- mask = __raw_readl(S3C2410_INTMSK);
-
- submask |= (1UL << (irqno - IRQ_S3CUART_RX0));
-
- /* check to see if we need to mask the parent IRQ */
-
- if ((submask & subcheck) == subcheck) {
- __raw_writel(mask | parentbit, S3C2410_INTMSK);
- }
-
- /* write back masks */
- __raw_writel(submask, S3C2410_INTSUBMSK);
-
-}
-
-static inline void
-s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit)
-{
- unsigned long mask;
- unsigned long submask;
-
- submask = __raw_readl(S3C2410_INTSUBMSK);
- mask = __raw_readl(S3C2410_INTMSK);
-
- submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0));
- mask &= ~parentbit;
-
- /* write back masks */
- __raw_writel(submask, S3C2410_INTSUBMSK);
- __raw_writel(mask, S3C2410_INTMSK);
-}
-
-
-static inline void
-s3c_irqsub_maskack(unsigned int irqno, unsigned int parentmask, unsigned int group)
-{
- unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
-
- s3c_irqsub_mask(irqno, parentmask, group);
-
- __raw_writel(bit, S3C2410_SUBSRCPND);
-
- /* only ack parent if we've got all the irqs (seems we must
- * ack, all and hope that the irq system retriggers ok when
- * the interrupt goes off again)
- */
-
- if (1) {
- __raw_writel(parentmask, S3C2410_SRCPND);
- __raw_writel(parentmask, S3C2410_INTPND);
- }
-}
-
-static inline void
-s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group)
-{
- unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
-
- __raw_writel(bit, S3C2410_SUBSRCPND);
-
- /* only ack parent if we've got all the irqs (seems we must
- * ack, all and hope that the irq system retriggers ok when
- * the interrupt goes off again)
- */
-
- if (1) {
- __raw_writel(parentmask, S3C2410_SRCPND);
- __raw_writel(parentmask, S3C2410_INTPND);
- }
-}
-
-/* exported for use in arch/arm/mach-s3c2410 */
-
-#ifdef CONFIG_PM
-extern int s3c_irq_wake(struct irq_data *data, unsigned int state);
-#else
-#define s3c_irq_wake NULL
-#endif
-
-extern int s3c_irqext_type(struct irq_data *d, unsigned int type);
+++ /dev/null
-#ifndef _ARCH_MCI_H
-#define _ARCH_MCI_H
-
-/**
- * struct s3c24xx_mci_pdata - sd/mmc controller platform data
- * @no_wprotect: Set this to indicate there is no write-protect switch.
- * @no_detect: Set this if there is no detect switch.
- * @wprotect_invert: Invert the default sense of the write protect switch.
- * @detect_invert: Invert the default sense of the write protect switch.
- * @use_dma: Set to allow the use of DMA.
- * @gpio_detect: GPIO number for the card detect line.
- * @gpio_wprotect: GPIO number for the write protect line.
- * @ocr_avail: The mask of the available power states, non-zero to use.
- * @set_power: Callback to control the power mode.
- *
- * The @gpio_detect is used for card detection when @no_wprotect is unset,
- * and the default sense is that 0 returned from gpio_get_value() means
- * that a card is inserted. If @detect_invert is set, then the value from
- * gpio_get_value() is inverted, which makes 1 mean card inserted.
- *
- * The driver will use @gpio_wprotect to signal whether the card is write
- * protected if @no_wprotect is not set. A 0 returned from gpio_get_value()
- * means the card is read/write, and 1 means read-only. The @wprotect_invert
- * will invert the value returned from gpio_get_value().
- *
- * Card power is set by @ocr_availa, using MCC_VDD_ constants if it is set
- * to a non-zero value, otherwise the default of 3.2-3.4V is used.
- */
-struct s3c24xx_mci_pdata {
- unsigned int no_wprotect : 1;
- unsigned int no_detect : 1;
- unsigned int wprotect_invert : 1;
- unsigned int detect_invert : 1; /* set => detect active high. */
- unsigned int use_dma : 1;
-
- unsigned int gpio_detect;
- unsigned int gpio_wprotect;
- unsigned long ocr_avail;
- void (*set_power)(unsigned char power_mode,
- unsigned short vdd);
-};
-
-/**
- * s3c24xx_mci_set_platdata - set platform data for mmc/sdi device
- * @pdata: The platform data
- *
- * Copy the platform data supplied by @pdata so that this can be marked
- * __initdata.
- */
-extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata);
-
-#endif /* _ARCH_NCI_H */
+++ /dev/null
-/* linux/arch/arm/plat-s3c24xx/include/plat/pll.h
- *
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C24xx - common pll registers and code
- */
-
-#define S3C24XX_PLLCON_MDIVSHIFT 12
-#define S3C24XX_PLLCON_PDIVSHIFT 4
-#define S3C24XX_PLLCON_SDIVSHIFT 0
-#define S3C24XX_PLLCON_MDIVMASK ((1<<(1+(19-12)))-1)
-#define S3C24XX_PLLCON_PDIVMASK ((1<<5)-1)
-#define S3C24XX_PLLCON_SDIVMASK 3
-
-#include <asm/div64.h>
-
-static inline unsigned int
-s3c24xx_get_pll(unsigned int pllval, unsigned int baseclk)
-{
- unsigned int mdiv, pdiv, sdiv;
- uint64_t fvco;
-
- mdiv = pllval >> S3C24XX_PLLCON_MDIVSHIFT;
- pdiv = pllval >> S3C24XX_PLLCON_PDIVSHIFT;
- sdiv = pllval >> S3C24XX_PLLCON_SDIVSHIFT;
-
- mdiv &= S3C24XX_PLLCON_MDIVMASK;
- pdiv &= S3C24XX_PLLCON_PDIVMASK;
- sdiv &= S3C24XX_PLLCON_SDIVMASK;
-
- fvco = (uint64_t)baseclk * (mdiv + 8);
- do_div(fvco, (pdiv + 2) << sdiv);
-
- return (unsigned int)fvco;
-}
-
-#define S3C2416_PLL_M_SHIFT (14)
-#define S3C2416_PLL_P_SHIFT (5)
-#define S3C2416_PLL_S_MASK (7)
-#define S3C2416_PLL_M_MASK ((1 << 10) - 1)
-#define S3C2416_PLL_P_MASK (63)
-
-static inline unsigned int
-s3c2416_get_pll(unsigned int pllval, unsigned int baseclk)
-{
- unsigned int m, p, s;
- uint64_t fvco;
-
- m = pllval >> S3C2416_PLL_M_SHIFT;
- p = pllval >> S3C2416_PLL_P_SHIFT;
-
- s = pllval & S3C2416_PLL_S_MASK;
- m &= S3C2416_PLL_M_MASK;
- p &= S3C2416_PLL_P_MASK;
-
- fvco = (uint64_t)baseclk * m;
- do_div(fvco, (p << s));
-
- return (unsigned int)fvco;
-}
+++ /dev/null
-/* arch/arm/mach-s3c2410/include/mach/dma.h
- *
- * Copyright (C) 2003-2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C24XX DMA support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* DMA Register definitions */
-
-#define S3C2410_DMA_DISRC (0x00)
-#define S3C2410_DMA_DISRCC (0x04)
-#define S3C2410_DMA_DIDST (0x08)
-#define S3C2410_DMA_DIDSTC (0x0C)
-#define S3C2410_DMA_DCON (0x10)
-#define S3C2410_DMA_DSTAT (0x14)
-#define S3C2410_DMA_DCSRC (0x18)
-#define S3C2410_DMA_DCDST (0x1C)
-#define S3C2410_DMA_DMASKTRIG (0x20)
-#define S3C2412_DMA_DMAREQSEL (0x24)
-#define S3C2443_DMA_DMAREQSEL (0x24)
-
-#define S3C2410_DISRCC_INC (1<<0)
-#define S3C2410_DISRCC_APB (1<<1)
-
-#define S3C2410_DMASKTRIG_STOP (1<<2)
-#define S3C2410_DMASKTRIG_ON (1<<1)
-#define S3C2410_DMASKTRIG_SWTRIG (1<<0)
-
-#define S3C2410_DCON_DEMAND (0<<31)
-#define S3C2410_DCON_HANDSHAKE (1<<31)
-#define S3C2410_DCON_SYNC_PCLK (0<<30)
-#define S3C2410_DCON_SYNC_HCLK (1<<30)
-
-#define S3C2410_DCON_INTREQ (1<<29)
-
-#define S3C2410_DCON_CH0_XDREQ0 (0<<24)
-#define S3C2410_DCON_CH0_UART0 (1<<24)
-#define S3C2410_DCON_CH0_SDI (2<<24)
-#define S3C2410_DCON_CH0_TIMER (3<<24)
-#define S3C2410_DCON_CH0_USBEP1 (4<<24)
-
-#define S3C2410_DCON_CH1_XDREQ1 (0<<24)
-#define S3C2410_DCON_CH1_UART1 (1<<24)
-#define S3C2410_DCON_CH1_I2SSDI (2<<24)
-#define S3C2410_DCON_CH1_SPI (3<<24)
-#define S3C2410_DCON_CH1_USBEP2 (4<<24)
-
-#define S3C2410_DCON_CH2_I2SSDO (0<<24)
-#define S3C2410_DCON_CH2_I2SSDI (1<<24)
-#define S3C2410_DCON_CH2_SDI (2<<24)
-#define S3C2410_DCON_CH2_TIMER (3<<24)
-#define S3C2410_DCON_CH2_USBEP3 (4<<24)
-
-#define S3C2410_DCON_CH3_UART2 (0<<24)
-#define S3C2410_DCON_CH3_SDI (1<<24)
-#define S3C2410_DCON_CH3_SPI (2<<24)
-#define S3C2410_DCON_CH3_TIMER (3<<24)
-#define S3C2410_DCON_CH3_USBEP4 (4<<24)
-
-#define S3C2410_DCON_SRCSHIFT (24)
-#define S3C2410_DCON_SRCMASK (7<<24)
-
-#define S3C2410_DCON_BYTE (0<<20)
-#define S3C2410_DCON_HALFWORD (1<<20)
-#define S3C2410_DCON_WORD (2<<20)
-
-#define S3C2410_DCON_AUTORELOAD (0<<22)
-#define S3C2410_DCON_NORELOAD (1<<22)
-#define S3C2410_DCON_HWTRIG (1<<23)
-
-#ifdef CONFIG_CPU_S3C2440
-#define S3C2440_DIDSTC_CHKINT (1<<2)
-
-#define S3C2440_DCON_CH0_I2SSDO (5<<24)
-#define S3C2440_DCON_CH0_PCMIN (6<<24)
-
-#define S3C2440_DCON_CH1_PCMOUT (5<<24)
-#define S3C2440_DCON_CH1_SDI (6<<24)
-
-#define S3C2440_DCON_CH2_PCMIN (5<<24)
-#define S3C2440_DCON_CH2_MICIN (6<<24)
-
-#define S3C2440_DCON_CH3_MICIN (5<<24)
-#define S3C2440_DCON_CH3_PCMOUT (6<<24)
-#endif
-
-#ifdef CONFIG_CPU_S3C2412
-
-#define S3C2412_DMAREQSEL_SRC(x) ((x)<<1)
-
-#define S3C2412_DMAREQSEL_HW (1)
-
-#define S3C2412_DMAREQSEL_SPI0TX S3C2412_DMAREQSEL_SRC(0)
-#define S3C2412_DMAREQSEL_SPI0RX S3C2412_DMAREQSEL_SRC(1)
-#define S3C2412_DMAREQSEL_SPI1TX S3C2412_DMAREQSEL_SRC(2)
-#define S3C2412_DMAREQSEL_SPI1RX S3C2412_DMAREQSEL_SRC(3)
-#define S3C2412_DMAREQSEL_I2STX S3C2412_DMAREQSEL_SRC(4)
-#define S3C2412_DMAREQSEL_I2SRX S3C2412_DMAREQSEL_SRC(5)
-#define S3C2412_DMAREQSEL_TIMER S3C2412_DMAREQSEL_SRC(9)
-#define S3C2412_DMAREQSEL_SDI S3C2412_DMAREQSEL_SRC(10)
-#define S3C2412_DMAREQSEL_USBEP1 S3C2412_DMAREQSEL_SRC(13)
-#define S3C2412_DMAREQSEL_USBEP2 S3C2412_DMAREQSEL_SRC(14)
-#define S3C2412_DMAREQSEL_USBEP3 S3C2412_DMAREQSEL_SRC(15)
-#define S3C2412_DMAREQSEL_USBEP4 S3C2412_DMAREQSEL_SRC(16)
-#define S3C2412_DMAREQSEL_XDREQ0 S3C2412_DMAREQSEL_SRC(17)
-#define S3C2412_DMAREQSEL_XDREQ1 S3C2412_DMAREQSEL_SRC(18)
-#define S3C2412_DMAREQSEL_UART0_0 S3C2412_DMAREQSEL_SRC(19)
-#define S3C2412_DMAREQSEL_UART0_1 S3C2412_DMAREQSEL_SRC(20)
-#define S3C2412_DMAREQSEL_UART1_0 S3C2412_DMAREQSEL_SRC(21)
-#define S3C2412_DMAREQSEL_UART1_1 S3C2412_DMAREQSEL_SRC(22)
-#define S3C2412_DMAREQSEL_UART2_0 S3C2412_DMAREQSEL_SRC(23)
-#define S3C2412_DMAREQSEL_UART2_1 S3C2412_DMAREQSEL_SRC(24)
-
-#endif
-
-#define S3C2443_DMAREQSEL_SRC(x) ((x)<<1)
-
-#define S3C2443_DMAREQSEL_HW (1)
-
-#define S3C2443_DMAREQSEL_SPI0TX S3C2443_DMAREQSEL_SRC(0)
-#define S3C2443_DMAREQSEL_SPI0RX S3C2443_DMAREQSEL_SRC(1)
-#define S3C2443_DMAREQSEL_SPI1TX S3C2443_DMAREQSEL_SRC(2)
-#define S3C2443_DMAREQSEL_SPI1RX S3C2443_DMAREQSEL_SRC(3)
-#define S3C2443_DMAREQSEL_I2STX S3C2443_DMAREQSEL_SRC(4)
-#define S3C2443_DMAREQSEL_I2SRX S3C2443_DMAREQSEL_SRC(5)
-#define S3C2443_DMAREQSEL_TIMER S3C2443_DMAREQSEL_SRC(9)
-#define S3C2443_DMAREQSEL_SDI S3C2443_DMAREQSEL_SRC(10)
-#define S3C2443_DMAREQSEL_XDREQ0 S3C2443_DMAREQSEL_SRC(17)
-#define S3C2443_DMAREQSEL_XDREQ1 S3C2443_DMAREQSEL_SRC(18)
-#define S3C2443_DMAREQSEL_UART0_0 S3C2443_DMAREQSEL_SRC(19)
-#define S3C2443_DMAREQSEL_UART0_1 S3C2443_DMAREQSEL_SRC(20)
-#define S3C2443_DMAREQSEL_UART1_0 S3C2443_DMAREQSEL_SRC(21)
-#define S3C2443_DMAREQSEL_UART1_1 S3C2443_DMAREQSEL_SRC(22)
-#define S3C2443_DMAREQSEL_UART2_0 S3C2443_DMAREQSEL_SRC(23)
-#define S3C2443_DMAREQSEL_UART2_1 S3C2443_DMAREQSEL_SRC(24)
-#define S3C2443_DMAREQSEL_UART3_0 S3C2443_DMAREQSEL_SRC(25)
-#define S3C2443_DMAREQSEL_UART3_1 S3C2443_DMAREQSEL_SRC(26)
-#define S3C2443_DMAREQSEL_PCMOUT S3C2443_DMAREQSEL_SRC(27)
-#define S3C2443_DMAREQSEL_PCMIN S3C2443_DMAREQSEL_SRC(28)
-#define S3C2443_DMAREQSEL_MICIN S3C2443_DMAREQSEL_SRC(29)
+++ /dev/null
-/* arch/arm/mach-s3c2410/include/mach/regs-iis.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- * http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 IIS register definition
-*/
-
-#ifndef __ASM_ARCH_REGS_IIS_H
-#define __ASM_ARCH_REGS_IIS_H
-
-#define S3C2410_IISCON (0x00)
-
-#define S3C2410_IISCON_LRINDEX (1<<8)
-#define S3C2410_IISCON_TXFIFORDY (1<<7)
-#define S3C2410_IISCON_RXFIFORDY (1<<6)
-#define S3C2410_IISCON_TXDMAEN (1<<5)
-#define S3C2410_IISCON_RXDMAEN (1<<4)
-#define S3C2410_IISCON_TXIDLE (1<<3)
-#define S3C2410_IISCON_RXIDLE (1<<2)
-#define S3C2410_IISCON_PSCEN (1<<1)
-#define S3C2410_IISCON_IISEN (1<<0)
-
-#define S3C2410_IISMOD (0x04)
-
-#define S3C2440_IISMOD_MPLL (1<<9)
-#define S3C2410_IISMOD_SLAVE (1<<8)
-#define S3C2410_IISMOD_NOXFER (0<<6)
-#define S3C2410_IISMOD_RXMODE (1<<6)
-#define S3C2410_IISMOD_TXMODE (2<<6)
-#define S3C2410_IISMOD_TXRXMODE (3<<6)
-#define S3C2410_IISMOD_LR_LLOW (0<<5)
-#define S3C2410_IISMOD_LR_RLOW (1<<5)
-#define S3C2410_IISMOD_IIS (0<<4)
-#define S3C2410_IISMOD_MSB (1<<4)
-#define S3C2410_IISMOD_8BIT (0<<3)
-#define S3C2410_IISMOD_16BIT (1<<3)
-#define S3C2410_IISMOD_BITMASK (1<<3)
-#define S3C2410_IISMOD_256FS (0<<2)
-#define S3C2410_IISMOD_384FS (1<<2)
-#define S3C2410_IISMOD_16FS (0<<0)
-#define S3C2410_IISMOD_32FS (1<<0)
-#define S3C2410_IISMOD_48FS (2<<0)
-#define S3C2410_IISMOD_FS_MASK (3<<0)
-
-#define S3C2410_IISPSR (0x08)
-#define S3C2410_IISPSR_INTMASK (31<<5)
-#define S3C2410_IISPSR_INTSHIFT (5)
-#define S3C2410_IISPSR_EXTMASK (31<<0)
-#define S3C2410_IISPSR_EXTSHFIT (0)
-
-#define S3C2410_IISFCON (0x0c)
-
-#define S3C2410_IISFCON_TXDMA (1<<15)
-#define S3C2410_IISFCON_RXDMA (1<<14)
-#define S3C2410_IISFCON_TXENABLE (1<<13)
-#define S3C2410_IISFCON_RXENABLE (1<<12)
-#define S3C2410_IISFCON_TXMASK (0x3f << 6)
-#define S3C2410_IISFCON_TXSHIFT (6)
-#define S3C2410_IISFCON_RXMASK (0x3f)
-#define S3C2410_IISFCON_RXSHIFT (0)
-
-#define S3C2410_IISFIFO (0x10)
-#endif /* __ASM_ARCH_REGS_IIS_H */
+++ /dev/null
-/* arch/arm/mach-s3c2410/include/mach/regs-spi.h
- *
- * Copyright (c) 2004 Fetron GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 SPI register definition
-*/
-
-#ifndef __ASM_ARCH_REGS_SPI_H
-#define __ASM_ARCH_REGS_SPI_H
-
-#define S3C2410_SPI1 (0x20)
-#define S3C2412_SPI1 (0x100)
-
-#define S3C2410_SPCON (0x00)
-
-#define S3C2412_SPCON_RXFIFO_RB2 (0<<14)
-#define S3C2412_SPCON_RXFIFO_RB4 (1<<14)
-#define S3C2412_SPCON_RXFIFO_RB12 (2<<14)
-#define S3C2412_SPCON_RXFIFO_RB14 (3<<14)
-#define S3C2412_SPCON_TXFIFO_RB2 (0<<12)
-#define S3C2412_SPCON_TXFIFO_RB4 (1<<12)
-#define S3C2412_SPCON_TXFIFO_RB12 (2<<12)
-#define S3C2412_SPCON_TXFIFO_RB14 (3<<12)
-#define S3C2412_SPCON_RXFIFO_RESET (1<<11) /* RxFIFO reset */
-#define S3C2412_SPCON_TXFIFO_RESET (1<<10) /* TxFIFO reset */
-#define S3C2412_SPCON_RXFIFO_EN (1<<9) /* RxFIFO Enable */
-#define S3C2412_SPCON_TXFIFO_EN (1<<8) /* TxFIFO Enable */
-
-#define S3C2412_SPCON_DIRC_RX (1<<7)
-
-#define S3C2410_SPCON_SMOD_DMA (2<<5) /* DMA mode */
-#define S3C2410_SPCON_SMOD_INT (1<<5) /* interrupt mode */
-#define S3C2410_SPCON_SMOD_POLL (0<<5) /* polling mode */
-#define S3C2410_SPCON_ENSCK (1<<4) /* Enable SCK */
-#define S3C2410_SPCON_MSTR (1<<3) /* Master/Slave select
- 0: slave, 1: master */
-#define S3C2410_SPCON_CPOL_HIGH (1<<2) /* Clock polarity select */
-#define S3C2410_SPCON_CPOL_LOW (0<<2) /* Clock polarity select */
-
-#define S3C2410_SPCON_CPHA_FMTB (1<<1) /* Clock Phase Select */
-#define S3C2410_SPCON_CPHA_FMTA (0<<1) /* Clock Phase Select */
-
-#define S3C2410_SPCON_TAGD (1<<0) /* Tx auto garbage data mode */
-
-
-#define S3C2410_SPSTA (0x04)
-
-#define S3C2412_SPSTA_RXFIFO_AE (1<<11)
-#define S3C2412_SPSTA_TXFIFO_AE (1<<10)
-#define S3C2412_SPSTA_RXFIFO_ERROR (1<<9)
-#define S3C2412_SPSTA_TXFIFO_ERROR (1<<8)
-#define S3C2412_SPSTA_RXFIFO_FIFO (1<<7)
-#define S3C2412_SPSTA_RXFIFO_EMPTY (1<<6)
-#define S3C2412_SPSTA_TXFIFO_NFULL (1<<5)
-#define S3C2412_SPSTA_TXFIFO_EMPTY (1<<4)
-
-#define S3C2410_SPSTA_DCOL (1<<2) /* Data Collision Error */
-#define S3C2410_SPSTA_MULD (1<<1) /* Multi Master Error */
-#define S3C2410_SPSTA_READY (1<<0) /* Data Tx/Rx ready */
-#define S3C2412_SPSTA_READY_ORG (1<<3)
-
-#define S3C2410_SPPIN (0x08)
-
-#define S3C2410_SPPIN_ENMUL (1<<2) /* Multi Master Error detect */
-#define S3C2410_SPPIN_RESERVED (1<<1)
-#define S3C2410_SPPIN_KEEP (1<<0) /* Master Out keep */
-
-#define S3C2410_SPPRE (0x0C)
-#define S3C2410_SPTDAT (0x10)
-#define S3C2410_SPRDAT (0x14)
-
-#define S3C2412_TXFIFO (0x18)
-#define S3C2412_RXFIFO (0x18)
-#define S3C2412_SPFIC (0x24)
-
-
-#endif /* __ASM_ARCH_REGS_SPI_H */
+++ /dev/null
-/* arch/arm/mach-s3c2410/include/mach/regs-udc.h
- *
- * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at>
- *
- * This include file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
-*/
-
-#ifndef __ASM_ARCH_REGS_UDC_H
-#define __ASM_ARCH_REGS_UDC_H
-
-#define S3C2410_USBDREG(x) (x)
-
-#define S3C2410_UDC_FUNC_ADDR_REG S3C2410_USBDREG(0x0140)
-#define S3C2410_UDC_PWR_REG S3C2410_USBDREG(0x0144)
-#define S3C2410_UDC_EP_INT_REG S3C2410_USBDREG(0x0148)
-
-#define S3C2410_UDC_USB_INT_REG S3C2410_USBDREG(0x0158)
-#define S3C2410_UDC_EP_INT_EN_REG S3C2410_USBDREG(0x015c)
-
-#define S3C2410_UDC_USB_INT_EN_REG S3C2410_USBDREG(0x016c)
-
-#define S3C2410_UDC_FRAME_NUM1_REG S3C2410_USBDREG(0x0170)
-#define S3C2410_UDC_FRAME_NUM2_REG S3C2410_USBDREG(0x0174)
-
-#define S3C2410_UDC_EP0_FIFO_REG S3C2410_USBDREG(0x01c0)
-#define S3C2410_UDC_EP1_FIFO_REG S3C2410_USBDREG(0x01c4)
-#define S3C2410_UDC_EP2_FIFO_REG S3C2410_USBDREG(0x01c8)
-#define S3C2410_UDC_EP3_FIFO_REG S3C2410_USBDREG(0x01cc)
-#define S3C2410_UDC_EP4_FIFO_REG S3C2410_USBDREG(0x01d0)
-
-#define S3C2410_UDC_EP1_DMA_CON S3C2410_USBDREG(0x0200)
-#define S3C2410_UDC_EP1_DMA_UNIT S3C2410_USBDREG(0x0204)
-#define S3C2410_UDC_EP1_DMA_FIFO S3C2410_USBDREG(0x0208)
-#define S3C2410_UDC_EP1_DMA_TTC_L S3C2410_USBDREG(0x020c)
-#define S3C2410_UDC_EP1_DMA_TTC_M S3C2410_USBDREG(0x0210)
-#define S3C2410_UDC_EP1_DMA_TTC_H S3C2410_USBDREG(0x0214)
-
-#define S3C2410_UDC_EP2_DMA_CON S3C2410_USBDREG(0x0218)
-#define S3C2410_UDC_EP2_DMA_UNIT S3C2410_USBDREG(0x021c)
-#define S3C2410_UDC_EP2_DMA_FIFO S3C2410_USBDREG(0x0220)
-#define S3C2410_UDC_EP2_DMA_TTC_L S3C2410_USBDREG(0x0224)
-#define S3C2410_UDC_EP2_DMA_TTC_M S3C2410_USBDREG(0x0228)
-#define S3C2410_UDC_EP2_DMA_TTC_H S3C2410_USBDREG(0x022c)
-
-#define S3C2410_UDC_EP3_DMA_CON S3C2410_USBDREG(0x0240)
-#define S3C2410_UDC_EP3_DMA_UNIT S3C2410_USBDREG(0x0244)
-#define S3C2410_UDC_EP3_DMA_FIFO S3C2410_USBDREG(0x0248)
-#define S3C2410_UDC_EP3_DMA_TTC_L S3C2410_USBDREG(0x024c)
-#define S3C2410_UDC_EP3_DMA_TTC_M S3C2410_USBDREG(0x0250)
-#define S3C2410_UDC_EP3_DMA_TTC_H S3C2410_USBDREG(0x0254)
-
-#define S3C2410_UDC_EP4_DMA_CON S3C2410_USBDREG(0x0258)
-#define S3C2410_UDC_EP4_DMA_UNIT S3C2410_USBDREG(0x025c)
-#define S3C2410_UDC_EP4_DMA_FIFO S3C2410_USBDREG(0x0260)
-#define S3C2410_UDC_EP4_DMA_TTC_L S3C2410_USBDREG(0x0264)
-#define S3C2410_UDC_EP4_DMA_TTC_M S3C2410_USBDREG(0x0268)
-#define S3C2410_UDC_EP4_DMA_TTC_H S3C2410_USBDREG(0x026c)
-
-#define S3C2410_UDC_INDEX_REG S3C2410_USBDREG(0x0178)
-
-/* indexed registers */
-
-#define S3C2410_UDC_MAXP_REG S3C2410_USBDREG(0x0180)
-
-#define S3C2410_UDC_EP0_CSR_REG S3C2410_USBDREG(0x0184)
-
-#define S3C2410_UDC_IN_CSR1_REG S3C2410_USBDREG(0x0184)
-#define S3C2410_UDC_IN_CSR2_REG S3C2410_USBDREG(0x0188)
-
-#define S3C2410_UDC_OUT_CSR1_REG S3C2410_USBDREG(0x0190)
-#define S3C2410_UDC_OUT_CSR2_REG S3C2410_USBDREG(0x0194)
-#define S3C2410_UDC_OUT_FIFO_CNT1_REG S3C2410_USBDREG(0x0198)
-#define S3C2410_UDC_OUT_FIFO_CNT2_REG S3C2410_USBDREG(0x019c)
-
-#define S3C2410_UDC_FUNCADDR_UPDATE (1<<7)
-
-#define S3C2410_UDC_PWR_ISOUP (1<<7) // R/W
-#define S3C2410_UDC_PWR_RESET (1<<3) // R
-#define S3C2410_UDC_PWR_RESUME (1<<2) // R/W
-#define S3C2410_UDC_PWR_SUSPEND (1<<1) // R
-#define S3C2410_UDC_PWR_ENSUSPEND (1<<0) // R/W
-
-#define S3C2410_UDC_PWR_DEFAULT 0x00
-
-#define S3C2410_UDC_INT_EP4 (1<<4) // R/W (clear only)
-#define S3C2410_UDC_INT_EP3 (1<<3) // R/W (clear only)
-#define S3C2410_UDC_INT_EP2 (1<<2) // R/W (clear only)
-#define S3C2410_UDC_INT_EP1 (1<<1) // R/W (clear only)
-#define S3C2410_UDC_INT_EP0 (1<<0) // R/W (clear only)
-
-#define S3C2410_UDC_USBINT_RESET (1<<2) // R/W (clear only)
-#define S3C2410_UDC_USBINT_RESUME (1<<1) // R/W (clear only)
-#define S3C2410_UDC_USBINT_SUSPEND (1<<0) // R/W (clear only)
-
-#define S3C2410_UDC_INTE_EP4 (1<<4) // R/W
-#define S3C2410_UDC_INTE_EP3 (1<<3) // R/W
-#define S3C2410_UDC_INTE_EP2 (1<<2) // R/W
-#define S3C2410_UDC_INTE_EP1 (1<<1) // R/W
-#define S3C2410_UDC_INTE_EP0 (1<<0) // R/W
-
-#define S3C2410_UDC_USBINTE_RESET (1<<2) // R/W
-#define S3C2410_UDC_USBINTE_SUSPEND (1<<0) // R/W
-
-
-#define S3C2410_UDC_INDEX_EP0 (0x00)
-#define S3C2410_UDC_INDEX_EP1 (0x01) // ??
-#define S3C2410_UDC_INDEX_EP2 (0x02) // ??
-#define S3C2410_UDC_INDEX_EP3 (0x03) // ??
-#define S3C2410_UDC_INDEX_EP4 (0x04) // ??
-
-#define S3C2410_UDC_ICSR1_CLRDT (1<<6) // R/W
-#define S3C2410_UDC_ICSR1_SENTSTL (1<<5) // R/W (clear only)
-#define S3C2410_UDC_ICSR1_SENDSTL (1<<4) // R/W
-#define S3C2410_UDC_ICSR1_FFLUSH (1<<3) // W (set only)
-#define S3C2410_UDC_ICSR1_UNDRUN (1<<2) // R/W (clear only)
-#define S3C2410_UDC_ICSR1_PKTRDY (1<<0) // R/W (set only)
-
-#define S3C2410_UDC_ICSR2_AUTOSET (1<<7) // R/W
-#define S3C2410_UDC_ICSR2_ISO (1<<6) // R/W
-#define S3C2410_UDC_ICSR2_MODEIN (1<<5) // R/W
-#define S3C2410_UDC_ICSR2_DMAIEN (1<<4) // R/W
-
-#define S3C2410_UDC_OCSR1_CLRDT (1<<7) // R/W
-#define S3C2410_UDC_OCSR1_SENTSTL (1<<6) // R/W (clear only)
-#define S3C2410_UDC_OCSR1_SENDSTL (1<<5) // R/W
-#define S3C2410_UDC_OCSR1_FFLUSH (1<<4) // R/W
-#define S3C2410_UDC_OCSR1_DERROR (1<<3) // R
-#define S3C2410_UDC_OCSR1_OVRRUN (1<<2) // R/W (clear only)
-#define S3C2410_UDC_OCSR1_PKTRDY (1<<0) // R/W (clear only)
-
-#define S3C2410_UDC_OCSR2_AUTOCLR (1<<7) // R/W
-#define S3C2410_UDC_OCSR2_ISO (1<<6) // R/W
-#define S3C2410_UDC_OCSR2_DMAIEN (1<<5) // R/W
-
-#define S3C2410_UDC_EP0_CSR_OPKRDY (1<<0)
-#define S3C2410_UDC_EP0_CSR_IPKRDY (1<<1)
-#define S3C2410_UDC_EP0_CSR_SENTSTL (1<<2)
-#define S3C2410_UDC_EP0_CSR_DE (1<<3)
-#define S3C2410_UDC_EP0_CSR_SE (1<<4)
-#define S3C2410_UDC_EP0_CSR_SENDSTL (1<<5)
-#define S3C2410_UDC_EP0_CSR_SOPKTRDY (1<<6)
-#define S3C2410_UDC_EP0_CSR_SSE (1<<7)
-
-#define S3C2410_UDC_MAXP_8 (1<<0)
-#define S3C2410_UDC_MAXP_16 (1<<1)
-#define S3C2410_UDC_MAXP_32 (1<<2)
-#define S3C2410_UDC_MAXP_64 (1<<3)
-
-
-#endif
+++ /dev/null
-/* linux/include/asm-arm/plat-s3c24xx/s3c2410.h
- *
- * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2410 machine directory
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#ifdef CONFIG_CPU_S3C2410
-
-extern int s3c2410_init(void);
-extern int s3c2410a_init(void);
-
-extern void s3c2410_map_io(void);
-
-extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2410_init_clocks(int xtal);
-
-#else
-#define s3c2410_init_clocks NULL
-#define s3c2410_init_uarts NULL
-#define s3c2410_map_io NULL
-#define s3c2410_init NULL
-#define s3c2410a_init NULL
-#endif
-
-extern int s3c2410_baseclk_add(void);
+++ /dev/null
-/* linux/include/asm-arm/plat-s3c24xx/s3c2412.h
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2412 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2412
-
-extern int s3c2412_init(void);
-
-extern void s3c2412_map_io(void);
-
-extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2412_init_clocks(int xtal);
-
-extern int s3c2412_baseclk_add(void);
-#else
-#define s3c2412_init_clocks NULL
-#define s3c2412_init_uarts NULL
-#define s3c2412_map_io NULL
-#define s3c2412_init NULL
-#endif
+++ /dev/null
-/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h
- *
- * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>
- *
- * Header file for s3c2416 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2416
-
-struct s3c2410_uartcfg;
-
-extern int s3c2416_init(void);
-
-extern void s3c2416_map_io(void);
-
-extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2416_init_clocks(int xtal);
-
-extern int s3c2416_baseclk_add(void);
-
-#else
-#define s3c2416_init_clocks NULL
-#define s3c2416_init_uarts NULL
-#define s3c2416_map_io NULL
-#define s3c2416_init NULL
-#endif
+++ /dev/null
-/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2443 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2443
-
-struct s3c2410_uartcfg;
-
-extern int s3c2443_init(void);
-
-extern void s3c2443_map_io(void);
-
-extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2443_init_clocks(int xtal);
-
-extern int s3c2443_baseclk_add(void);
-
-#else
-#define s3c2443_init_clocks NULL
-#define s3c2443_init_uarts NULL
-#define s3c2443_map_io NULL
-#define s3c2443_init NULL
-#endif
-
-/* common code used by s3c2443 and others.
- * note, not to be used outside of arch/arm/mach-s3c* */
-
-struct clk; /* some files don't need clk.h otherwise */
-
-typedef unsigned int (*pll_fn)(unsigned int reg, unsigned int base);
-typedef unsigned int (*fdiv_fn)(unsigned long clkcon0);
-
-extern void s3c2443_common_setup_clocks(pll_fn get_mpll, fdiv_fn fdiv);
-extern void s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, fdiv_fn fdiv);
-
-extern int s3c2443_clkcon_enable_h(struct clk *clk, int enable);
-extern int s3c2443_clkcon_enable_p(struct clk *clk, int enable);
-extern int s3c2443_clkcon_enable_s(struct clk *clk, int enable);
-
-extern struct clksrc_clk clk_epllref;
-extern struct clksrc_clk clk_esysclk;
-extern struct clksrc_clk clk_msysclk;
+++ /dev/null
-/* linux/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C2440 and S3C2442 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
-
-extern void s3c244x_map_io(void);
-
-extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c244x_init_clocks(int xtal);
-
-#else
-#define s3c244x_init_clocks NULL
-#define s3c244x_init_uarts NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C2440
-extern int s3c2440_init(void);
-
-extern void s3c2440_map_io(void);
-#else
-#define s3c2440_init NULL
-#define s3c2440_map_io NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C2442
-extern int s3c2442_init(void);
-
-extern void s3c2442_map_io(void);
-#else
-#define s3c2442_init NULL
-#define s3c2442_map_io NULL
-#endif
+++ /dev/null
-/* arch/arm/mach-s3c2410/include/mach/udc.h
- *
- * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *
- * Changelog:
- * 14-Mar-2005 RTP Created file
- * 02-Aug-2005 RTP File rename
- * 07-Sep-2005 BJD Minor cleanups, changed cmd to enum
- * 18-Jan-2007 HMW Add per-platform vbus_draw function
-*/
-
-#ifndef __ASM_ARM_ARCH_UDC_H
-#define __ASM_ARM_ARCH_UDC_H
-
-enum s3c2410_udc_cmd_e {
- S3C2410_UDC_P_ENABLE = 1, /* Pull-up enable */
- S3C2410_UDC_P_DISABLE = 2, /* Pull-up disable */
- S3C2410_UDC_P_RESET = 3, /* UDC reset, in case of */
-};
-
-struct s3c2410_udc_mach_info {
- void (*udc_command)(enum s3c2410_udc_cmd_e);
- void (*vbus_draw)(unsigned int ma);
-
- unsigned int pullup_pin;
- unsigned int pullup_pin_inverted;
-
- unsigned int vbus_pin;
- unsigned char vbus_pin_inverted;
-};
-
-extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *);
-
-/**
- * s3c24xx_hsudc_platdata - Platform data for USB High-Speed gadget controller.
- * @epnum: Number of endpoints to be instantiated by the controller driver.
- * @gpio_init: Platform specific USB related GPIO initialization.
- * @gpio_uninit: Platform specific USB releted GPIO uninitialzation.
- *
- * Representation of platform data for the S3C24XX USB 2.0 High Speed gadget
- * controllers.
- */
-struct s3c24xx_hsudc_platdata {
- unsigned int epnum;
- void (*gpio_init)(void);
- void (*gpio_uninit)(void);
-};
-
-extern void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd);
-
-#endif /* __ASM_ARM_ARCH_UDC_H */
},
};
+/* armdiv
+ *
+ * this clock is sourced from msysclk and can have a number of
+ * divider values applied to it to then be fed into armclk.
+*/
+
+static unsigned int *armdiv;
+static int nr_armdiv;
+static int armdivmask;
+
+static unsigned long s3c2443_armclk_roundrate(struct clk *clk,
+ unsigned long rate)
+{
+ unsigned long parent = clk_get_rate(clk->parent);
+ unsigned long calc;
+ unsigned best = 256; /* bigger than any value */
+ unsigned div;
+ int ptr;
+
+ if (!nr_armdiv)
+ return -EINVAL;
+
+ for (ptr = 0; ptr < nr_armdiv; ptr++) {
+ div = armdiv[ptr];
+ if (div) {
+ /* cpufreq provides 266mhz as 266666000 not 266666666 */
+ calc = (parent / div / 1000) * 1000;
+ if (calc <= rate && div < best)
+ best = div;
+ }
+ }
+
+ return parent / best;
+}
+
+static unsigned long s3c2443_armclk_getrate(struct clk *clk)
+{
+ unsigned long rate = clk_get_rate(clk->parent);
+ unsigned long clkcon0;
+ int val;
+
+ if (!nr_armdiv || !armdivmask)
+ return -EINVAL;
+
+ clkcon0 = __raw_readl(S3C2443_CLKDIV0);
+ clkcon0 &= armdivmask;
+ val = clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT;
+
+ return rate / armdiv[val];
+}
+
+static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent = clk_get_rate(clk->parent);
+ unsigned long calc;
+ unsigned div;
+ unsigned best = 256; /* bigger than any value */
+ int ptr;
+ int val = -1;
+
+ if (!nr_armdiv || !armdivmask)
+ return -EINVAL;
+
+ for (ptr = 0; ptr < nr_armdiv; ptr++) {
+ div = armdiv[ptr];
+ if (div) {
+ /* cpufreq provides 266mhz as 266666000 not 266666666 */
+ calc = (parent / div / 1000) * 1000;
+ if (calc <= rate && div < best) {
+ best = div;
+ val = ptr;
+ }
+ }
+ }
+
+ if (val >= 0) {
+ unsigned long clkcon0;
+
+ clkcon0 = __raw_readl(S3C2443_CLKDIV0);
+ clkcon0 &= ~armdivmask;
+ clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
+ __raw_writel(clkcon0, S3C2443_CLKDIV0);
+ }
+
+ return (val == -1) ? -EINVAL : 0;
+}
+
+static struct clk clk_armdiv = {
+ .name = "armdiv",
+ .parent = &clk_msysclk.clk,
+ .ops = &(struct clk_ops) {
+ .round_rate = s3c2443_armclk_roundrate,
+ .get_rate = s3c2443_armclk_getrate,
+ .set_rate = s3c2443_armclk_setrate,
+ },
+};
+
+/* armclk
+ *
+ * this is the clock fed into the ARM core itself, from armdiv or from hclk.
+ */
+
+static struct clk *clk_arm_sources[] = {
+ [0] = &clk_armdiv,
+ [1] = &clk_h,
+};
+
+static struct clksrc_clk clk_arm = {
+ .clk = {
+ .name = "armclk",
+ },
+ .sources = &(struct clksrc_sources) {
+ .sources = clk_arm_sources,
+ .nr_sources = ARRAY_SIZE(clk_arm_sources),
+ },
+ .reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 },
+};
+
/* usbhost
*
* usb host bus-clock, usually 48MHz to provide USB bus clock timing
},
};
+static struct clk clk_i2s_ext = {
+ .name = "i2s-ext",
+};
+
+/* i2s_eplldiv
+ *
+ * This clock is the output from the I2S divisor of ESYSCLK, and is separate
+ * from the mux that comes after it (cannot merge into one single clock)
+*/
+
+static struct clksrc_clk clk_i2s_eplldiv = {
+ .clk = {
+ .name = "i2s-eplldiv",
+ .parent = &clk_esysclk.clk,
+ },
+ .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, },
+};
+
+/* i2s-ref
+ *
+ * i2s bus reference clock, selectable from external, esysclk or epllref
+ *
+ * Note, this used to be two clocks, but was compressed into one.
+*/
+
+static struct clk *clk_i2s_srclist[] = {
+ [0] = &clk_i2s_eplldiv.clk,
+ [1] = &clk_i2s_ext,
+ [2] = &clk_epllref.clk,
+ [3] = &clk_epllref.clk,
+};
+
+static struct clksrc_clk clk_i2s = {
+ .clk = {
+ .name = "i2s-if",
+ .ctrlbit = S3C2443_SCLKCON_I2SCLK,
+ .enable = s3c2443_clkcon_enable_s,
+
+ },
+ .sources = &(struct clksrc_sources) {
+ .sources = clk_i2s_srclist,
+ .nr_sources = ARRAY_SIZE(clk_i2s_srclist),
+ },
+ .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
+};
static struct clk init_clocks_off[] = {
{
+ .name = "iis",
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_IIS,
+ }, {
+ .name = "hsspi",
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_HSSPI,
+ }, {
.name = "adc",
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_HCLKCON_DMA5,
}, {
.name = "hsmmc",
+ .devname = "s3c-sdhci.1",
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_HSMMC,
/* EPLLCON compatible enough to get on/off information */
-void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll,
- fdiv_fn get_fdiv)
+void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll)
{
unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
pll = get_mpll(mpllcon, xtal);
clk_msysclk.clk.rate = pll;
- fclk = pll / get_fdiv(clkdiv0);
+ fclk = clk_get_rate(&clk_armdiv);
hclk = s3c2443_prediv_getrate(&clk_prediv);
hclk /= s3c2443_get_hdiv(clkdiv0);
pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
&clk_ext,
&clk_epll,
&clk_usb_bus,
+ &clk_armdiv,
};
static struct clksrc_clk *clksrcs[] __initdata = {
+ &clk_i2s_eplldiv,
+ &clk_i2s,
&clk_usb_bus_host,
&clk_epllref,
&clk_esysclk,
&clk_msysclk,
+ &clk_arm,
};
void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
- fdiv_fn get_fdiv)
+ unsigned int *divs, int nr_divs,
+ int divmask)
{
int ptr;
+ armdiv = divs;
+ nr_armdiv = nr_divs;
+ armdivmask = divmask;
+
/* s3c2443 parents h and p clocks from prediv */
clk_h.parent = &clk_prediv;
clk_p.parent = &clk_prediv;
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- s3c2443_common_setup_clocks(get_mpll, get_fdiv);
+ s3c2443_common_setup_clocks(get_mpll);
}
config PLAT_S5P
bool
- depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS4)
+ depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
default y
select ARM_VIC if !ARCH_EXYNOS4
select ARM_GIC if ARCH_EXYNOS4
select S3C_GPIO_TRACK
select S5P_GPIO_DRVSTR
select SAMSUNG_GPIOLIB_4BIT
- select S3C_GPIO_CFG_S3C64XX
- select S3C_GPIO_PULL_UPDOWN
- select S3C_GPIO_CFG_S3C24XX
select PLAT_SAMSUNG
select SAMSUNG_CLKSRC
select SAMSUNG_IRQ_VIC_TIMER
help
Use the High Resolution timer support
+config S5P_PM
+ bool
+ help
+ Common code for power management support on S5P and newer SoCs
+ Note: Do not select this for S5P6440 and S5P6450.
+
comment "System MMU"
config S5P_SYSTEM_MMU
help
Say Y here if you want to enable System MMU
+config S5P_SLEEP
+ bool
+ help
+ Internal config node to apply common S5P sleep management code.
+ Can be selected by S5P and newer SoCs with similar sleep procedure.
+
config S5P_DEV_FIMC0
bool
help
help
Compile in platform device definitions for FIMD controller 0
+config S5P_DEV_I2C_HDMIPHY
+ bool
+ help
+ Compile in platform device definitions for I2C HDMIPHY controller
+
config S5P_DEV_MFC
bool
help
help
Compile in platform device definitions for MIPI-CSIS channel 1
+config S5P_DEV_TV
+ bool
+ help
+ Compile in platform device definition for TV interface
+
config S5P_DEV_USB_EHCI
bool
help
# Core files
-obj-y += dev-pmu.o
obj-y += dev-uart.o
obj-y += cpu.o
obj-y += clock.o
obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o
obj-$(CONFIG_S5P_GPIO_INT) += irq-gpioint.o
obj-$(CONFIG_S5P_SYSTEM_MMU) += sysmmu.o
-obj-$(CONFIG_PM) += pm.o
-obj-$(CONFIG_PM) += irq-pm.o
+obj-$(CONFIG_S5P_PM) += pm.o irq-pm.o
+obj-$(CONFIG_S5P_SLEEP) += sleep.o
obj-$(CONFIG_S5P_HRT) += s5p-time.o
# devices
obj-$(CONFIG_S5P_DEV_MFC) += dev-mfc.o
-obj-$(CONFIG_S5P_DEV_FIMC0) += dev-fimc0.o
-obj-$(CONFIG_S5P_DEV_FIMC1) += dev-fimc1.o
-obj-$(CONFIG_S5P_DEV_FIMC2) += dev-fimc2.o
-obj-$(CONFIG_S5P_DEV_FIMC3) += dev-fimc3.o
-obj-$(CONFIG_S5P_DEV_FIMD0) += dev-fimd0.o
-obj-$(CONFIG_S5P_DEV_ONENAND) += dev-onenand.o
-obj-$(CONFIG_S5P_DEV_CSIS0) += dev-csis0.o
-obj-$(CONFIG_S5P_DEV_CSIS1) += dev-csis1.o
-obj-$(CONFIG_S5P_DEV_USB_EHCI) += dev-ehci.o
obj-$(CONFIG_S5P_SETUP_MIPIPHY) += setup-mipiphy.o
.map_io = exynos4_map_io,
.init_clocks = exynos4_init_clocks,
.init_uarts = exynos4_init_uarts,
- .init = exynos4_init,
+ .init = exynos_init,
.name = name_exynos4210,
}, {
.idcode = EXYNOS4212_CPU_ID,
.map_io = exynos4_map_io,
.init_clocks = exynos4_init_clocks,
.init_uarts = exynos4_init_uarts,
- .init = exynos4_init,
+ .init = exynos_init,
.name = name_exynos4212,
}, {
.idcode = EXYNOS4412_CPU_ID,
.map_io = exynos4_map_io,
.init_clocks = exynos4_init_clocks,
.init_uarts = exynos4_init_uarts,
- .init = exynos4_init,
+ .init = exynos_init,
.name = name_exynos4412,
},
};
+++ /dev/null
-/*
- * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd.
- *
- * S5P series device definition for MIPI-CSIS channel 0
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <mach/map.h>
-
-static struct resource s5p_mipi_csis0_resource[] = {
- [0] = {
- .start = S5P_PA_MIPI_CSIS0,
- .end = S5P_PA_MIPI_CSIS0 + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_MIPI_CSIS0,
- .end = IRQ_MIPI_CSIS0,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-struct platform_device s5p_device_mipi_csis0 = {
- .name = "s5p-mipi-csis",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5p_mipi_csis0_resource),
- .resource = s5p_mipi_csis0_resource,
-};
+++ /dev/null
-/*
- * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd.
- *
- * S5P series device definition for MIPI-CSIS channel 1
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <mach/map.h>
-
-static struct resource s5p_mipi_csis1_resource[] = {
- [0] = {
- .start = S5P_PA_MIPI_CSIS1,
- .end = S5P_PA_MIPI_CSIS1 + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_MIPI_CSIS1,
- .end = IRQ_MIPI_CSIS1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device s5p_device_mipi_csis1 = {
- .name = "s5p-mipi-csis",
- .id = 1,
- .num_resources = ARRAY_SIZE(s5p_mipi_csis1_resource),
- .resource = s5p_mipi_csis1_resource,
-};
+++ /dev/null
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/platform_device.h>
-#include <mach/irqs.h>
-#include <mach/map.h>
-#include <plat/devs.h>
-#include <plat/ehci.h>
-#include <plat/usb-phy.h>
-
-/* USB EHCI Host Controller registration */
-static struct resource s5p_ehci_resource[] = {
- [0] = {
- .start = S5P_PA_EHCI,
- .end = S5P_PA_EHCI + SZ_256 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_USB_HOST,
- .end = IRQ_USB_HOST,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static u64 s5p_device_ehci_dmamask = 0xffffffffUL;
-
-struct platform_device s5p_device_ehci = {
- .name = "s5p-ehci",
- .id = -1,
- .num_resources = ARRAY_SIZE(s5p_ehci_resource),
- .resource = s5p_ehci_resource,
- .dev = {
- .dma_mask = &s5p_device_ehci_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-
-void __init s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd)
-{
- struct s5p_ehci_platdata *npd;
-
- npd = s3c_set_platdata(pd, sizeof(struct s5p_ehci_platdata),
- &s5p_device_ehci);
-
- if (!npd->phy_init)
- npd->phy_init = s5p_usb_phy_init;
- if (!npd->phy_exit)
- npd->phy_exit = s5p_usb_phy_exit;
-}
+++ /dev/null
-/* linux/arch/arm/plat-s5p/dev-fimc0.c
- *
- * Copyright (c) 2010 Samsung Electronics
- *
- * Base S5P FIMC0 resource and device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <mach/map.h>
-
-static struct resource s5p_fimc0_resource[] = {
- [0] = {
- .start = S5P_PA_FIMC0,
- .end = S5P_PA_FIMC0 + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_FIMC0,
- .end = IRQ_FIMC0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 s5p_fimc0_dma_mask = DMA_BIT_MASK(32);
-
-struct platform_device s5p_device_fimc0 = {
- .name = "s5p-fimc",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5p_fimc0_resource),
- .resource = s5p_fimc0_resource,
- .dev = {
- .dma_mask = &s5p_fimc0_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
+++ /dev/null
-/* linux/arch/arm/plat-s5p/dev-fimc1.c
- *
- * Copyright (c) 2010 Samsung Electronics
- *
- * Base S5P FIMC1 resource and device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <mach/map.h>
-
-static struct resource s5p_fimc1_resource[] = {
- [0] = {
- .start = S5P_PA_FIMC1,
- .end = S5P_PA_FIMC1 + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_FIMC1,
- .end = IRQ_FIMC1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 s5p_fimc1_dma_mask = DMA_BIT_MASK(32);
-
-struct platform_device s5p_device_fimc1 = {
- .name = "s5p-fimc",
- .id = 1,
- .num_resources = ARRAY_SIZE(s5p_fimc1_resource),
- .resource = s5p_fimc1_resource,
- .dev = {
- .dma_mask = &s5p_fimc1_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
+++ /dev/null
-/* linux/arch/arm/plat-s5p/dev-fimc2.c
- *
- * Copyright (c) 2010 Samsung Electronics
- *
- * Base S5P FIMC2 resource and device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <mach/map.h>
-
-static struct resource s5p_fimc2_resource[] = {
- [0] = {
- .start = S5P_PA_FIMC2,
- .end = S5P_PA_FIMC2 + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_FIMC2,
- .end = IRQ_FIMC2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 s5p_fimc2_dma_mask = DMA_BIT_MASK(32);
-
-struct platform_device s5p_device_fimc2 = {
- .name = "s5p-fimc",
- .id = 2,
- .num_resources = ARRAY_SIZE(s5p_fimc2_resource),
- .resource = s5p_fimc2_resource,
- .dev = {
- .dma_mask = &s5p_fimc2_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
+++ /dev/null
-/* linux/arch/arm/plat-s5p/dev-fimc3.c
- *
- * Copyright (c) 2010 Samsung Electronics
- *
- * Base S5P FIMC3 resource and device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <mach/map.h>
-
-static struct resource s5p_fimc3_resource[] = {
- [0] = {
- .start = S5P_PA_FIMC3,
- .end = S5P_PA_FIMC3 + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_FIMC3,
- .end = IRQ_FIMC3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 s5p_fimc3_dma_mask = DMA_BIT_MASK(32);
-
-struct platform_device s5p_device_fimc3 = {
- .name = "s5p-fimc",
- .id = 3,
- .num_resources = ARRAY_SIZE(s5p_fimc3_resource),
- .resource = s5p_fimc3_resource,
- .dev = {
- .dma_mask = &s5p_fimc3_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
+++ /dev/null
-/* linux/arch/arm/plat-s5p/dev-fimd0.c
- *
- * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Core file for Samsung Display Controller (FIMD) driver
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <linux/gfp.h>
-#include <linux/dma-mapping.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/fb.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-static struct resource s5p_fimd0_resource[] = {
- [0] = {
- .start = S5P_PA_FIMD0,
- .end = S5P_PA_FIMD0 + SZ_32K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_FIMD0_VSYNC,
- .end = IRQ_FIMD0_VSYNC,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_FIMD0_FIFO,
- .end = IRQ_FIMD0_FIFO,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = IRQ_FIMD0_SYSTEM,
- .end = IRQ_FIMD0_SYSTEM,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 fimd0_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s5p_device_fimd0 = {
- .name = "s5p-fb",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5p_fimd0_resource),
- .resource = s5p_fimd0_resource,
- .dev = {
- .dma_mask = &fimd0_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-void __init s5p_fimd0_set_platdata(struct s3c_fb_platdata *pd)
-{
- s3c_set_platdata(pd, sizeof(struct s3c_fb_platdata),
- &s5p_device_fimd0);
-}
#include <plat/irqs.h>
#include <plat/mfc.h>
-static struct resource s5p_mfc_resource[] = {
- [0] = {
- .start = S5P_PA_MFC,
- .end = S5P_PA_MFC + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_MFC,
- .end = IRQ_MFC,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-struct platform_device s5p_device_mfc = {
- .name = "s5p-mfc",
- .id = -1,
- .num_resources = ARRAY_SIZE(s5p_mfc_resource),
- .resource = s5p_mfc_resource,
-};
-
-/*
- * MFC hardware has 2 memory interfaces which are modelled as two separate
- * platform devices to let dma-mapping distinguish between them.
- *
- * MFC parent device (s5p_device_mfc) must be registered before memory
- * interface specific devices (s5p_device_mfc_l and s5p_device_mfc_r).
- */
-
-static u64 s5p_mfc_dma_mask = DMA_BIT_MASK(32);
-
-struct platform_device s5p_device_mfc_l = {
- .name = "s5p-mfc-l",
- .id = -1,
- .dev = {
- .parent = &s5p_device_mfc.dev,
- .dma_mask = &s5p_mfc_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-struct platform_device s5p_device_mfc_r = {
- .name = "s5p-mfc-r",
- .id = -1,
- .dev = {
- .parent = &s5p_device_mfc.dev,
- .dma_mask = &s5p_mfc_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
struct s5p_mfc_reserved_mem {
phys_addr_t base;
unsigned long size;
+++ /dev/null
-/* linux/arch/arm/plat-s5p/dev-onenand.c
- *
- * Copyright 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright (c) 2008-2010 Samsung Electronics
- * Kyungmin Park <kyungmin.park@samsung.com>
- *
- * S5P series device definition for OneNAND devices
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-static struct resource s5p_onenand_resources[] = {
- [0] = {
- .start = S5P_PA_ONENAND,
- .end = S5P_PA_ONENAND + SZ_128K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = S5P_PA_ONENAND_DMA,
- .end = S5P_PA_ONENAND_DMA + SZ_8K - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = IRQ_ONENAND_AUDI,
- .end = IRQ_ONENAND_AUDI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device s5p_device_onenand = {
- .name = "s5pc110-onenand",
- .id = -1,
- .num_resources = ARRAY_SIZE(s5p_onenand_resources),
- .resource = s5p_onenand_resources,
-};
+++ /dev/null
-/*
- * linux/arch/arm/plat-s5p/dev-pmu.c
- *
- * Copyright (C) 2010 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/platform_device.h>
-#include <asm/pmu.h>
-#include <mach/irqs.h>
-
-static struct resource s5p_pmu_resource = {
- .start = IRQ_PMU,
- .end = IRQ_PMU,
- .flags = IORESOURCE_IRQ,
-};
-
-struct platform_device s5p_device_pmu = {
- .name = "arm-pmu",
- .id = ARM_PMU_DEVICE_CPU,
- .num_resources = 1,
- .resource = &s5p_pmu_resource,
-};
-
-static int __init s5p_pmu_init(void)
-{
- platform_device_register(&s5p_device_pmu);
- return 0;
-}
-arch_initcall(s5p_pmu_init);
+++ /dev/null
-/*
- * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- *
- * S5P series camera interface helper functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef PLAT_S5P_CAMPORT_H_
-#define PLAT_S5P_CAMPORT_H_ __FILE__
-
-enum s5p_camport_id {
- S5P_CAMPORT_A,
- S5P_CAMPORT_B,
-};
-
-/*
- * The helper functions to configure GPIO for the camera parallel bus.
- * The camera port can be multiplexed with any FIMC entity, even multiple
- * FIMC entities are allowed to be attached to a single port simultaneously.
- * These functions are to be used in the board setup code.
- */
-int s5pv210_fimc_setup_gpio(enum s5p_camport_id id);
-int exynos4_fimc_setup_gpio(enum s5p_camport_id id);
-
-#endif
+++ /dev/null
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __PLAT_S5P_EHCI_H
-#define __PLAT_S5P_EHCI_H
-
-struct s5p_ehci_platdata {
- int (*phy_init)(struct platform_device *pdev, int type);
- int (*phy_exit)(struct platform_device *pdev, int type);
-};
-
-extern void s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd);
-
-#endif /* __PLAT_S5P_EHCI_H */
+++ /dev/null
-/* linux/arch/arm/plat-s5p/include/plat/exynos4.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Header file for exynos4 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for EXYNOS4 related SoCs */
-
-extern void exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void exynos4_register_clocks(void);
-extern void exynos4210_register_clocks(void);
-extern void exynos4212_register_clocks(void);
-extern void exynos4_setup_clocks(void);
-
-#ifdef CONFIG_ARCH_EXYNOS4
-extern int exynos4_init(void);
-extern void exynos4_init_irq(void);
-extern void exynos4_map_io(void);
-extern void exynos4_init_clocks(int xtal);
-extern struct sys_timer exynos4_timer;
-
-#define exynos4_init_uarts exynos4_common_init_uarts
-
-#else
-#define exynos4_init_clocks NULL
-#define exynos4_init_uarts NULL
-#define exynos4_map_io NULL
-#define exynos4_init NULL
-#endif
+++ /dev/null
-/* linux/arch/arm/plat-s5p/include/plat/irqs.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P Common IRQ support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_S5P_IRQS_H
-#define __ASM_PLAT_S5P_IRQS_H __FILE__
-
-/* we keep the first set of CPU IRQs out of the range of
- * the ISA space, so that the PC104 has them to itself
- * and we don't end up having to do horrible things to the
- * standard ISA drivers....
- *
- * note, since we're using the VICs, our start must be a
- * mulitple of 32 to allow the common code to work
- */
-
-#define S5P_IRQ_OFFSET (32)
-
-#define S5P_IRQ(x) ((x) + S5P_IRQ_OFFSET)
-
-#define S5P_VIC0_BASE S5P_IRQ(0)
-#define S5P_VIC1_BASE S5P_IRQ(32)
-#define S5P_VIC2_BASE S5P_IRQ(64)
-#define S5P_VIC3_BASE S5P_IRQ(96)
-
-#define VIC_BASE(x) (S5P_VIC0_BASE + ((x)*32))
-
-#define IRQ_VIC0_BASE S5P_VIC0_BASE
-#define IRQ_VIC1_BASE S5P_VIC1_BASE
-#define IRQ_VIC2_BASE S5P_VIC2_BASE
-
-/* VIC based IRQs */
-
-#define S5P_IRQ_VIC0(x) (S5P_VIC0_BASE + (x))
-#define S5P_IRQ_VIC1(x) (S5P_VIC1_BASE + (x))
-#define S5P_IRQ_VIC2(x) (S5P_VIC2_BASE + (x))
-#define S5P_IRQ_VIC3(x) (S5P_VIC3_BASE + (x))
-
-#define S5P_TIMER_IRQ(x) (11 + (x))
-
-#define IRQ_TIMER0 S5P_TIMER_IRQ(0)
-#define IRQ_TIMER1 S5P_TIMER_IRQ(1)
-#define IRQ_TIMER2 S5P_TIMER_IRQ(2)
-#define IRQ_TIMER3 S5P_TIMER_IRQ(3)
-#define IRQ_TIMER4 S5P_TIMER_IRQ(4)
-
-#define IRQ_EINT(x) ((x) < 16 ? ((x) + S5P_EINT_BASE1) \
- : ((x) - 16 + S5P_EINT_BASE2))
-
-#define EINT_OFFSET(irq) ((irq) < S5P_EINT_BASE2 ? \
- ((irq) - S5P_EINT_BASE1) : \
- ((irq) + 16 - S5P_EINT_BASE2))
-
-#define IRQ_EINT_BIT(x) EINT_OFFSET(x)
-
-/* Typically only a few gpio chips require gpio interrupt support.
- To avoid memory waste irq descriptors are allocated only for
- S5P_GPIOINT_GROUP_COUNT chips, each with total number of
- S5P_GPIOINT_GROUP_SIZE pins/irqs. Each GPIOINT group can be assiged
- to any gpio chip with the s5p_register_gpio_interrupt() function */
-#define S5P_GPIOINT_GROUP_COUNT 4
-#define S5P_GPIOINT_GROUP_SIZE 8
-#define S5P_GPIOINT_COUNT (S5P_GPIOINT_GROUP_COUNT * S5P_GPIOINT_GROUP_SIZE)
-
-/* IRQ types common for all s5p platforms */
-#define S5P_IRQ_TYPE_LEVEL_LOW (0x00)
-#define S5P_IRQ_TYPE_LEVEL_HIGH (0x01)
-#define S5P_IRQ_TYPE_EDGE_FALLING (0x02)
-#define S5P_IRQ_TYPE_EDGE_RISING (0x03)
-#define S5P_IRQ_TYPE_EDGE_BOTH (0x04)
-
-#endif /* __ASM_PLAT_S5P_IRQS_H */
+++ /dev/null
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __PLAT_S5P_MFC_H
-#define __PLAT_S5P_MFC_H
-
-/**
- * s5p_mfc_reserve_mem - function to early reserve memory for MFC driver
- * @rbase: base address for MFC 'right' memory interface
- * @rsize: size of the memory reserved for MFC 'right' interface
- * @lbase: base address for MFC 'left' memory interface
- * @lsize: size of the memory reserved for MFC 'left' interface
- *
- * This function reserves system memory for both MFC device memory
- * interfaces and registers it to respective struct device entries as
- * coherent memory.
- */
-void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
- phys_addr_t lbase, unsigned int lsize);
-
-#endif /* __PLAT_S5P_MFC_H */
+++ /dev/null
-/*
- * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd.
- *
- * S5P series MIPI CSI slave device support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef PLAT_S5P_MIPI_CSIS_H_
-#define PLAT_S5P_MIPI_CSIS_H_ __FILE__
-
-struct platform_device;
-
-/**
- * struct s5p_platform_mipi_csis - platform data for S5P MIPI-CSIS driver
- * @clk_rate: bus clock frequency
- * @lanes: number of data lanes used
- * @alignment: data alignment in bits
- * @hs_settle: HS-RX settle time
- * @fixed_phy_vdd: false to enable external D-PHY regulator management in the
- * driver or true in case this regulator has no enable function
- * @phy_enable: pointer to a callback controlling D-PHY enable/reset
- */
-struct s5p_platform_mipi_csis {
- unsigned long clk_rate;
- u8 lanes;
- u8 alignment;
- u8 hs_settle;
- bool fixed_phy_vdd;
- int (*phy_enable)(struct platform_device *pdev, bool on);
-};
-
-/**
- * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control
- * @pdev: MIPI-CSIS platform device
- * @on: true to enable D-PHY and deassert its reset
- * false to disable D-PHY
- */
-int s5p_csis_phy_enable(struct platform_device *pdev, bool on);
-
-#endif /* PLAT_S5P_MIPI_CSIS_H_ */
+++ /dev/null
-/* arch/arm/plat-s5p/include/plat/pll.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P PLL code
- *
- * Based on arch/arm/plat-s3c64xx/include/plat/pll.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/div64.h>
-
-#define PLL35XX_MDIV_MASK (0x3FF)
-#define PLL35XX_PDIV_MASK (0x3F)
-#define PLL35XX_SDIV_MASK (0x7)
-#define PLL35XX_MDIV_SHIFT (16)
-#define PLL35XX_PDIV_SHIFT (8)
-#define PLL35XX_SDIV_SHIFT (0)
-
-static inline unsigned long s5p_get_pll35xx(unsigned long baseclk, u32 pll_con)
-{
- u32 mdiv, pdiv, sdiv;
- u64 fvco = baseclk;
-
- mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK;
- pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK;
- sdiv = (pll_con >> PLL35XX_SDIV_SHIFT) & PLL35XX_SDIV_MASK;
-
- fvco *= mdiv;
- do_div(fvco, (pdiv << sdiv));
-
- return (unsigned long)fvco;
-}
-
-#define PLL36XX_KDIV_MASK (0xFFFF)
-#define PLL36XX_MDIV_MASK (0x1FF)
-#define PLL36XX_PDIV_MASK (0x3F)
-#define PLL36XX_SDIV_MASK (0x7)
-#define PLL36XX_MDIV_SHIFT (16)
-#define PLL36XX_PDIV_SHIFT (8)
-#define PLL36XX_SDIV_SHIFT (0)
-
-static inline unsigned long s5p_get_pll36xx(unsigned long baseclk,
- u32 pll_con0, u32 pll_con1)
-{
- unsigned long result;
- u32 mdiv, pdiv, sdiv, kdiv;
- u64 tmp;
-
- mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK;
- pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK;
- sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK;
- kdiv = pll_con1 & PLL36XX_KDIV_MASK;
-
- tmp = baseclk;
-
- tmp *= (mdiv << 16) + kdiv;
- do_div(tmp, (pdiv << sdiv));
- result = tmp >> 16;
-
- return result;
-}
-
-#define PLL45XX_MDIV_MASK (0x3FF)
-#define PLL45XX_PDIV_MASK (0x3F)
-#define PLL45XX_SDIV_MASK (0x7)
-#define PLL45XX_MDIV_SHIFT (16)
-#define PLL45XX_PDIV_SHIFT (8)
-#define PLL45XX_SDIV_SHIFT (0)
-
-enum pll45xx_type_t {
- pll_4500,
- pll_4502,
- pll_4508
-};
-
-static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con,
- enum pll45xx_type_t pll_type)
-{
- u32 mdiv, pdiv, sdiv;
- u64 fvco = baseclk;
-
- mdiv = (pll_con >> PLL45XX_MDIV_SHIFT) & PLL45XX_MDIV_MASK;
- pdiv = (pll_con >> PLL45XX_PDIV_SHIFT) & PLL45XX_PDIV_MASK;
- sdiv = (pll_con >> PLL45XX_SDIV_SHIFT) & PLL45XX_SDIV_MASK;
-
- if (pll_type == pll_4508)
- sdiv = sdiv - 1;
-
- fvco *= mdiv;
- do_div(fvco, (pdiv << sdiv));
-
- return (unsigned long)fvco;
-}
-
-#define PLL46XX_KDIV_MASK (0xFFFF)
-#define PLL4650C_KDIV_MASK (0xFFF)
-#define PLL46XX_MDIV_MASK (0x1FF)
-#define PLL46XX_PDIV_MASK (0x3F)
-#define PLL46XX_SDIV_MASK (0x7)
-#define PLL46XX_MDIV_SHIFT (16)
-#define PLL46XX_PDIV_SHIFT (8)
-#define PLL46XX_SDIV_SHIFT (0)
-
-enum pll46xx_type_t {
- pll_4600,
- pll_4650,
- pll_4650c,
-};
-
-static inline unsigned long s5p_get_pll46xx(unsigned long baseclk,
- u32 pll_con0, u32 pll_con1,
- enum pll46xx_type_t pll_type)
-{
- unsigned long result;
- u32 mdiv, pdiv, sdiv, kdiv;
- u64 tmp;
-
- mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK;
- pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK;
- sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK;
-
- if (pll_type == pll_4650c)
- kdiv = pll_con1 & PLL4650C_KDIV_MASK;
- else
- kdiv = pll_con1 & PLL46XX_KDIV_MASK;
-
- tmp = baseclk;
-
- if (pll_type == pll_4600) {
- tmp *= (mdiv << 16) + kdiv;
- do_div(tmp, (pdiv << sdiv));
- result = tmp >> 16;
- } else {
- tmp *= (mdiv << 10) + kdiv;
- do_div(tmp, (pdiv << sdiv));
- result = tmp >> 10;
- }
-
- return result;
-}
-
-#define PLL90XX_MDIV_MASK (0xFF)
-#define PLL90XX_PDIV_MASK (0x3F)
-#define PLL90XX_SDIV_MASK (0x7)
-#define PLL90XX_KDIV_MASK (0xffff)
-#define PLL90XX_MDIV_SHIFT (16)
-#define PLL90XX_PDIV_SHIFT (8)
-#define PLL90XX_SDIV_SHIFT (0)
-#define PLL90XX_KDIV_SHIFT (0)
-
-static inline unsigned long s5p_get_pll90xx(unsigned long baseclk,
- u32 pll_con, u32 pll_conk)
-{
- unsigned long result;
- u32 mdiv, pdiv, sdiv, kdiv;
- u64 tmp;
-
- mdiv = (pll_con >> PLL90XX_MDIV_SHIFT) & PLL90XX_MDIV_MASK;
- pdiv = (pll_con >> PLL90XX_PDIV_SHIFT) & PLL90XX_PDIV_MASK;
- sdiv = (pll_con >> PLL90XX_SDIV_SHIFT) & PLL90XX_SDIV_MASK;
- kdiv = pll_conk & PLL90XX_KDIV_MASK;
-
- /* We need to multiple baseclk by mdiv (the integer part) and kdiv
- * which is in 2^16ths, so shift mdiv up (does not overflow) and
- * add kdiv before multiplying. The use of tmp is to avoid any
- * overflows before shifting bac down into result when multipling
- * by the mdiv and kdiv pair.
- */
-
- tmp = baseclk;
- tmp *= (mdiv << 16) + kdiv;
- do_div(tmp, (pdiv << sdiv));
- result = tmp >> 16;
-
- return result;
-}
-
-#define PLL65XX_MDIV_MASK (0x3FF)
-#define PLL65XX_PDIV_MASK (0x3F)
-#define PLL65XX_SDIV_MASK (0x7)
-#define PLL65XX_MDIV_SHIFT (16)
-#define PLL65XX_PDIV_SHIFT (8)
-#define PLL65XX_SDIV_SHIFT (0)
-
-static inline unsigned long s5p_get_pll65xx(unsigned long baseclk, u32 pll_con)
-{
- u32 mdiv, pdiv, sdiv;
- u64 fvco = baseclk;
-
- mdiv = (pll_con >> PLL65XX_MDIV_SHIFT) & PLL65XX_MDIV_MASK;
- pdiv = (pll_con >> PLL65XX_PDIV_SHIFT) & PLL65XX_PDIV_MASK;
- sdiv = (pll_con >> PLL65XX_SDIV_SHIFT) & PLL65XX_SDIV_MASK;
-
- fvco *= mdiv;
- do_div(fvco, (pdiv << sdiv));
-
- return (unsigned long)fvco;
-}
+++ /dev/null
-/* linux/arch/arm/plat-s5p/include/plat/regs-srom.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P SROMC register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_S5P_REGS_SROM_H
-#define __ASM_PLAT_S5P_REGS_SROM_H __FILE__
-
-#include <mach/map.h>
-
-#define S5P_SROMREG(x) (S5P_VA_SROMC + (x))
-
-#define S5P_SROM_BW S5P_SROMREG(0x0)
-#define S5P_SROM_BC0 S5P_SROMREG(0x4)
-#define S5P_SROM_BC1 S5P_SROMREG(0x8)
-#define S5P_SROM_BC2 S5P_SROMREG(0xc)
-#define S5P_SROM_BC3 S5P_SROMREG(0x10)
-#define S5P_SROM_BC4 S5P_SROMREG(0x14)
-#define S5P_SROM_BC5 S5P_SROMREG(0x18)
-
-/* one register BW holds 4 x 4-bit packed settings for NCS0 - NCS3 */
-
-#define S5P_SROM_BW__DATAWIDTH__SHIFT 0
-#define S5P_SROM_BW__ADDRMODE__SHIFT 1
-#define S5P_SROM_BW__WAITENABLE__SHIFT 2
-#define S5P_SROM_BW__BYTEENABLE__SHIFT 3
-
-#define S5P_SROM_BW__CS_MASK 0xf
-
-#define S5P_SROM_BW__NCS0__SHIFT 0
-#define S5P_SROM_BW__NCS1__SHIFT 4
-#define S5P_SROM_BW__NCS2__SHIFT 8
-#define S5P_SROM_BW__NCS3__SHIFT 12
-#define S5P_SROM_BW__NCS4__SHIFT 16
-#define S5P_SROM_BW__NCS5__SHIFT 20
-
-/* applies to same to BCS0 - BCS3 */
-
-#define S5P_SROM_BCX__PMC__SHIFT 0
-#define S5P_SROM_BCX__TACP__SHIFT 4
-#define S5P_SROM_BCX__TCAH__SHIFT 8
-#define S5P_SROM_BCX__TCOH__SHIFT 12
-#define S5P_SROM_BCX__TACC__SHIFT 16
-#define S5P_SROM_BCX__TCOS__SHIFT 24
-#define S5P_SROM_BCX__TACS__SHIFT 28
-
-#endif /* __ASM_PLAT_S5P_REGS_SROM_H */
+++ /dev/null
-/* linux/arch/arm/plat-s5p/include/plat/reset.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_S5P_RESET_H
-#define __ASM_PLAT_S5P_RESET_H __FILE__
-
-extern void (*s5p_reset_hook)(void);
-
-#endif /* __ASM_PLAT_S5P_RESET_H */
+++ /dev/null
-/* linux/arch/arm/plat-s5p/include/plat/s5p-clock.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Header file for s5p clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_S5P_CLOCK_H
-#define __ASM_PLAT_S5P_CLOCK_H __FILE__
-
-#include <linux/clk.h>
-
-#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
-
-#define clk_fin_apll clk_ext_xtal_mux
-#define clk_fin_mpll clk_ext_xtal_mux
-#define clk_fin_epll clk_ext_xtal_mux
-#define clk_fin_dpll clk_ext_xtal_mux
-#define clk_fin_vpll clk_ext_xtal_mux
-#define clk_fin_hpll clk_ext_xtal_mux
-
-extern struct clk clk_ext_xtal_mux;
-extern struct clk clk_xusbxti;
-extern struct clk clk_48m;
-extern struct clk s5p_clk_27m;
-extern struct clk clk_fout_apll;
-extern struct clk clk_fout_mpll;
-extern struct clk clk_fout_epll;
-extern struct clk clk_fout_dpll;
-extern struct clk clk_fout_vpll;
-extern struct clk clk_arm;
-extern struct clk clk_vpll;
-
-extern struct clksrc_sources clk_src_apll;
-extern struct clksrc_sources clk_src_mpll;
-extern struct clksrc_sources clk_src_epll;
-extern struct clksrc_sources clk_src_dpll;
-
-extern int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable);
-
-/* Common EPLL operations for S5P platform */
-extern int s5p_epll_enable(struct clk *clk, int enable);
-extern unsigned long s5p_epll_get_rate(struct clk *clk);
-
-/* SPDIF clk operations common for S5PC100/V210/C110 and Exynos4 */
-extern int s5p_spdif_set_rate(struct clk *clk, unsigned long rate);
-extern unsigned long s5p_spdif_get_rate(struct clk *clk);
-
-extern struct clk_ops s5p_sclk_spdif_ops;
-#endif /* __ASM_PLAT_S5P_CLOCK_H */
+++ /dev/null
-/* linux/arch/arm/plat-s5p/include/plat/s5p-time.h
- *
- * Copyright 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Header file for s5p time support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_S5P_TIME_H
-#define __ASM_PLAT_S5P_TIME_H __FILE__
-
-/* S5P HR-Timer Clock mode */
-enum s5p_timer_mode {
- S5P_PWM0,
- S5P_PWM1,
- S5P_PWM2,
- S5P_PWM3,
- S5P_PWM4,
-};
-
-struct s5p_timer_source {
- unsigned int event_id;
- unsigned int source_id;
-};
-
-/* Be able to sleep for atleast 4 seconds (usually more) */
-#define S5PTIMER_MIN_RANGE 4
-
-#define TCNT_MAX 0xffffffff
-#define NON_PERIODIC 0
-#define PERIODIC 1
-
-extern void __init s5p_set_timer_source(enum s5p_timer_mode event,
- enum s5p_timer_mode source);
-extern struct sys_timer s5p_timer;
-#endif /* __ASM_PLAT_S5P_TIME_H */
+++ /dev/null
-/* arch/arm/plat-s5p/include/plat/s5p6440.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Header file for s5p6440 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
- /* Common init code for S5P6440 related SoCs */
-
-extern void s5p6440_register_clocks(void);
-extern void s5p6440_setup_clocks(void);
-
-#ifdef CONFIG_CPU_S5P6440
-
-extern int s5p64x0_init(void);
-extern void s5p6440_init_irq(void);
-extern void s5p6440_map_io(void);
-extern void s5p6440_init_clocks(int xtal);
-
-extern void s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-#else
-#define s5p6440_init_clocks NULL
-#define s5p6440_init_uarts NULL
-#define s5p6440_map_io NULL
-#define s5p64x0_init NULL
-#endif
-
-/* S5P6440 timer */
-
-extern struct sys_timer s5p6440_timer;
+++ /dev/null
-/* arch/arm/plat-s5p/include/plat/s5p6450.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Header file for s5p6450 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S5P6450 related SoCs */
-
-extern void s5p6450_register_clocks(void);
-extern void s5p6450_setup_clocks(void);
-
-#ifdef CONFIG_CPU_S5P6450
-
-extern int s5p64x0_init(void);
-extern void s5p6450_init_irq(void);
-extern void s5p6450_map_io(void);
-extern void s5p6450_init_clocks(int xtal);
-
-extern void s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-#else
-#define s5p6450_init_clocks NULL
-#define s5p6450_init_uarts NULL
-#define s5p6450_map_io NULL
-#define s5p64x0_init NULL
-#endif
-
-/* S5P6450 timer */
-
-extern struct sys_timer s5p6450_timer;
+++ /dev/null
-/* arch/arm/plat-s5p/include/plat/s5pc100.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Header file for s5pc100 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S5PC100 related SoCs */
-
-extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s5pc100_register_clocks(void);
-extern void s5pc100_setup_clocks(void);
-
-#ifdef CONFIG_CPU_S5PC100
-
-extern int s5pc100_init(void);
-extern void s5pc100_init_irq(void);
-extern void s5pc100_map_io(void);
-extern void s5pc100_init_clocks(int xtal);
-
-#define s5pc100_init_uarts s5pc100_common_init_uarts
-
-#else
-#define s5pc100_init_clocks NULL
-#define s5pc100_init_uarts NULL
-#define s5pc100_map_io NULL
-#define s5pc100_init NULL
-#endif
+++ /dev/null
-/* linux/arch/arm/plat-s5p/include/plat/s5pv210.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Header file for s5pv210 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S5PV210 related SoCs */
-
-extern void s5pv210_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s5pv210_register_clocks(void);
-extern void s5pv210_setup_clocks(void);
-
-#ifdef CONFIG_CPU_S5PV210
-
-extern int s5pv210_init(void);
-extern void s5pv210_init_irq(void);
-extern void s5pv210_map_io(void);
-extern void s5pv210_init_clocks(int xtal);
-
-#define s5pv210_init_uarts s5pv210_common_init_uarts
-
-#else
-#define s5pv210_init_clocks NULL
-#define s5pv210_init_uarts NULL
-#define s5pv210_map_io NULL
-#define s5pv210_init NULL
-#endif
+++ /dev/null
-/* linux/arch/arm/plat-s5p/include/plat/sysmmu.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Samsung System MMU driver for S5P platform
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM__PLAT_SYSMMU_H
-#define __ASM__PLAT_SYSMMU_H __FILE__
-
-enum S5P_SYSMMU_INTERRUPT_TYPE {
- SYSMMU_PAGEFAULT,
- SYSMMU_AR_MULTIHIT,
- SYSMMU_AW_MULTIHIT,
- SYSMMU_BUSERROR,
- SYSMMU_AR_SECURITY,
- SYSMMU_AR_ACCESS,
- SYSMMU_AW_SECURITY,
- SYSMMU_AW_PROTECTION, /* 7 */
- SYSMMU_FAULTS_NUM
-};
-
-#ifdef CONFIG_S5P_SYSTEM_MMU
-
-#include <mach/sysmmu.h>
-
-/**
- * s5p_sysmmu_enable() - enable system mmu of ip
- * @ips: The ip connected system mmu.
- * #pgd: Base physical address of the 1st level page table
- *
- * This function enable system mmu to transfer address
- * from virtual address to physical address
- */
-void s5p_sysmmu_enable(sysmmu_ips ips, unsigned long pgd);
-
-/**
- * s5p_sysmmu_disable() - disable sysmmu mmu of ip
- * @ips: The ip connected system mmu.
- *
- * This function disable system mmu to transfer address
- * from virtual address to physical address
- */
-void s5p_sysmmu_disable(sysmmu_ips ips);
-
-/**
- * s5p_sysmmu_set_tablebase_pgd() - set page table base address to refer page table
- * @ips: The ip connected system mmu.
- * @pgd: The page table base address.
- *
- * This function set page table base address
- * When system mmu transfer address from virtaul address to physical address,
- * system mmu refer address information from page table
- */
-void s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd);
-
-/**
- * s5p_sysmmu_tlb_invalidate() - flush all TLB entry in system mmu
- * @ips: The ip connected system mmu.
- *
- * This function flush all TLB entry in system mmu
- */
-void s5p_sysmmu_tlb_invalidate(sysmmu_ips ips);
-
-/** s5p_sysmmu_set_fault_handler() - Fault handler for System MMUs
- * @itype: type of fault.
- * @pgtable_base: the physical address of page table base. This is 0 if @ips is
- * SYSMMU_BUSERROR.
- * @fault_addr: the device (virtual) address that the System MMU tried to
- * translated. This is 0 if @ips is SYSMMU_BUSERROR.
- * Called when interrupt occurred by the System MMUs
- * The device drivers of peripheral devices that has a System MMU can implement
- * a fault handler to resolve address translation fault by System MMU.
- * The meanings of return value and parameters are described below.
-
- * return value: non-zero if the fault is correctly resolved.
- * zero if the fault is not handled.
- */
-void s5p_sysmmu_set_fault_handler(sysmmu_ips ips,
- int (*handler)(enum S5P_SYSMMU_INTERRUPT_TYPE itype,
- unsigned long pgtable_base,
- unsigned long fault_addr));
-#else
-#define s5p_sysmmu_enable(ips, pgd) do { } while (0)
-#define s5p_sysmmu_disable(ips) do { } while (0)
-#define s5p_sysmmu_set_tablebase_pgd(ips, pgd) do { } while (0)
-#define s5p_sysmmu_tlb_invalidate(ips) do { } while (0)
-#define s5p_sysmmu_set_fault_handler(ips, handler) do { } while (0)
-#endif
-#endif /* __ASM_PLAT_SYSMMU_H */
+++ /dev/null
-/* linux/arch/arm/plat-s5p/include/plat/system-reset.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Based on arch/arm/mach-s3c2410/include/mach/system-reset.h
- *
- * S5P - System define for arch_reset()
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <plat/watchdog-reset.h>
-
-void (*s5p_reset_hook)(void);
-
-static void arch_reset(char mode, const char *cmd)
-{
- /* SWRESET support in s5p_reset_hook() */
-
- if (s5p_reset_hook)
- s5p_reset_hook();
-
- /* Perform reset using Watchdog reset
- * if there is no s5p_reset_hook()
- */
-
- arch_wdt_reset();
-}
+++ /dev/null
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __PLAT_S5P_USB_PHY_H
-#define __PLAT_S5P_USB_PHY_H
-
-enum s5p_usb_phy_type {
- S5P_USB_PHY_DEVICE,
- S5P_USB_PHY_HOST,
-};
-
-extern int s5p_usb_phy_init(struct platform_device *pdev, int type);
-extern int s5p_usb_phy_exit(struct platform_device *pdev, int type);
-
-#endif /* __PLAT_S5P_REGS_USB_PHY_H */
int start;
int nr_groups;
int irq;
- struct s3c_gpio_chip **chips;
+ struct samsung_gpio_chip **chips;
void (*handler)(unsigned int, struct irq_desc *);
};
chained_irq_enter(chip, desc);
for (group = 0; group < bank->nr_groups; group++) {
- struct s3c_gpio_chip *chip = bank->chips[group];
+ struct samsung_gpio_chip *chip = bank->chips[group];
if (!chip)
continue;
chained_irq_exit(chip, desc);
}
-static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip)
+static __init int s5p_gpioint_add(struct samsung_gpio_chip *chip)
{
static int used_gpioint_groups = 0;
int group = chip->group;
return -EINVAL;
if (!bank->handler) {
- bank->chips = kzalloc(sizeof(struct s3c_gpio_chip *) *
+ bank->chips = kzalloc(sizeof(struct samsung_gpio_chip *) *
bank->nr_groups, GFP_KERNEL);
if (!bank->chips)
return -ENOMEM;
int __init s5p_register_gpio_interrupt(int pin)
{
- struct s3c_gpio_chip *my_chip = s3c_gpiolib_getchip(pin);
+ struct samsung_gpio_chip *my_chip = samsung_gpiolib_getchip(pin);
int offset, group;
int ret;
--- /dev/null
+/* linux/arch/arm/plat-s5p/sleep.S
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Common S5P Sleep Code
+ * Based on S3C64XX sleep code by:
+ * Ben Dooks, (c) 2008 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+ .text
+
+ /*
+ * sleep magic, to allow the bootloader to check for an valid
+ * image to resume to. Must be the first word before the
+ * s3c_cpu_resume entry.
+ */
+
+ .word 0x2bedf00d
+
+ /*
+ * s3c_cpu_resume
+ *
+ * resume code entry for bootloader to call
+ *
+ * we must put this code here in the data segment as we have no
+ * other way of restoring the stack pointer after sleep, and we
+ * must not write to the code segment (code is read-only)
+ */
+
+ENTRY(s3c_cpu_resume)
+ b cpu_resume
configuration. GPIOlib shall be compiled only for S3C64XX and S5P
series of processors.
-config S3C_GPIO_CFG_S3C24XX
- bool
- help
- Internal configuration to enable S3C24XX style GPIO configuration
- functions.
-
config S3C_GPIO_CFG_S3C64XX
bool
help
Internal configuration to enable S3C64XX style GPIO configuration
functions.
-config S3C_GPIO_PULL_UPDOWN
- bool
- help
- Internal configuration to enable the correct GPIO pull helper
-
-config S3C_GPIO_PULL_S3C2443
- bool
- select S3C_GPIO_PULL_UPDOWN
- help
- Internal configuration to enable the correct GPIO pull helper for S3C2443-style GPIO
-
-config S3C_GPIO_PULL_DOWN
- bool
- help
- Internal configuration to enable the correct GPIO pull helper
-
-config S3C_GPIO_PULL_UP
- bool
- help
- Internal configuration to enable the correct GPIO pull helper
-
config S5P_GPIO_DRVSTR
bool
help
-# arch/arm/plat-s3c64xx/Makefile
+# arch/arm/plat-samsung/Makefile
#
# Copyright 2009 Simtec Electronics
#
obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o
obj-y += clock.o
obj-y += pwm-clock.o
-obj-y += gpio.o
-obj-y += gpio-config.o
-obj-y += dev-asocdma.o
obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o
obj-y += platformdata.o
-obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o
-obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o
-obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o
-obj-$(CONFIG_S3C_DEV_HSMMC3) += dev-hsmmc3.o
-obj-$(CONFIG_S3C_DEV_HWMON) += dev-hwmon.o
-obj-y += dev-i2c0.o
-obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o
-obj-$(CONFIG_S3C_DEV_I2C2) += dev-i2c2.o
-obj-$(CONFIG_S3C_DEV_I2C3) += dev-i2c3.o
-obj-$(CONFIG_S3C_DEV_I2C4) += dev-i2c4.o
-obj-$(CONFIG_S3C_DEV_I2C5) += dev-i2c5.o
-obj-$(CONFIG_S3C_DEV_I2C6) += dev-i2c6.o
-obj-$(CONFIG_S3C_DEV_I2C7) += dev-i2c7.o
-obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o
+obj-y += devs.o
obj-y += dev-uart.o
-obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o
-obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o
-obj-$(CONFIG_S3C_DEV_WDT) += dev-wdt.o
-obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o
-obj-$(CONFIG_S3C_DEV_ONENAND) += dev-onenand.o
-obj-$(CONFIG_S3C_DEV_RTC) += dev-rtc.o
-
-obj-$(CONFIG_SAMSUNG_DEV_ADC) += dev-adc.o
-obj-$(CONFIG_SAMSUNG_DEV_IDE) += dev-ide.o
-obj-$(CONFIG_SAMSUNG_DEV_TS) += dev-ts.o
-obj-$(CONFIG_SAMSUNG_DEV_KEYPAD) += dev-keypad.o
-obj-$(CONFIG_SAMSUNG_DEV_PWM) += dev-pwm.o
+
obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT) += dev-backlight.o
# DMA support
enum s3c_cpu_type {
TYPE_ADCV1, /* S3C24XX */
+ TYPE_ADCV11, /* S3C2443 */
+ TYPE_ADCV12, /* S3C2416, S3C2450 */
TYPE_ADCV2, /* S3C64XX, S5P64X0, S5PC100 */
TYPE_ADCV3, /* S5PV210, S5PC110, EXYNOS4210 */
};
client->select_cb(client, 1);
- con &= ~S3C2410_ADCCON_MUXMASK;
+ if (cpu == TYPE_ADCV1 || cpu == TYPE_ADCV2)
+ con &= ~S3C2410_ADCCON_MUXMASK;
con &= ~S3C2410_ADCCON_STDBM;
con &= ~S3C2410_ADCCON_STARTMASK;
if (!client->is_ts) {
if (cpu == TYPE_ADCV3)
writel(client->channel & 0xf, adc->regs + S5P_ADCMUX);
+ else if (cpu == TYPE_ADCV11 || cpu == TYPE_ADCV12)
+ writel(client->channel & 0xf,
+ adc->regs + S3C2443_ADCMUX);
else
con |= S3C2410_ADCCON_SELMUX(client->channel);
}
client->nr_samples--;
- if (cpu != TYPE_ADCV1) {
- /* S3C64XX/S5P ADC resolution is 12-bit */
- data0 &= 0xfff;
- data1 &= 0xfff;
- } else {
+ if (cpu == TYPE_ADCV1 || cpu == TYPE_ADCV11) {
data0 &= 0x3ff;
data1 &= 0x3ff;
+ } else {
+ /* S3C2416/S3C64XX/S5P ADC resolution is 12-bit */
+ data0 &= 0xfff;
+ data1 &= 0xfff;
}
if (client->convert_cb)
}
exit:
- if (cpu != TYPE_ADCV1) {
+ if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3) {
/* Clear ADC interrupt */
writel(0, adc->regs + S3C64XX_ADCCLRINT);
}
struct device *dev = &pdev->dev;
struct adc_device *adc;
struct resource *regs;
+ enum s3c_cpu_type cpu = platform_get_device_id(pdev)->driver_data;
int ret;
unsigned tmp;
clk_enable(adc->clk);
tmp = adc->prescale | S3C2410_ADCCON_PRSCEN;
- if (platform_get_device_id(pdev)->driver_data != TYPE_ADCV1) {
- /* Enable 12-bit ADC resolution */
+
+ /* Enable 12-bit ADC resolution */
+ if (cpu == TYPE_ADCV12)
+ tmp |= S3C2416_ADCCON_RESSEL;
+ if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3)
tmp |= S3C64XX_ADCCON_RESSEL;
- }
+
writel(tmp, adc->regs + S3C2410_ADCCON);
dev_info(dev, "attached adc driver\n");
struct platform_device *pdev = container_of(dev,
struct platform_device, dev);
struct adc_device *adc = platform_get_drvdata(pdev);
+ enum s3c_cpu_type cpu = platform_get_device_id(pdev)->driver_data;
int ret;
unsigned long tmp;
enable_irq(adc->irq);
tmp = adc->prescale | S3C2410_ADCCON_PRSCEN;
+
/* Enable 12-bit ADC resolution */
- if (platform_get_device_id(pdev)->driver_data != TYPE_ADCV1)
+ if (cpu == TYPE_ADCV12)
+ tmp |= S3C2416_ADCCON_RESSEL;
+ if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3)
tmp |= S3C64XX_ADCCON_RESSEL;
+
writel(tmp, adc->regs + S3C2410_ADCCON);
return 0;
{
.name = "s3c24xx-adc",
.driver_data = TYPE_ADCV1,
+ }, {
+ .name = "s3c2443-adc",
+ .driver_data = TYPE_ADCV11,
+ }, {
+ .name = "s3c2416-adc",
+ .driver_data = TYPE_ADCV12,
}, {
.name = "s3c64xx-adc",
.driver_data = TYPE_ADCV2,
+++ /dev/null
-/* linux/arch/arm/plat-samsung/dev-adc.c
- *
- * Copyright 2010 Maurus Cuelenaere
- *
- * S3C64xx series device definition for ADC device
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/adc.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-static struct resource s3c_adc_resource[] = {
- [0] = {
- .start = SAMSUNG_PA_ADC,
- .end = SAMSUNG_PA_ADC + SZ_256 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_TC,
- .end = IRQ_TC,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_ADC,
- .end = IRQ_ADC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device s3c_device_adc = {
- .name = "samsung-adc",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_adc_resource),
- .resource = s3c_adc_resource,
-};
+++ /dev/null
-/* linux/arch/arm/plat-samsung/dev-asocdma.c
- *
- * Copyright (c) 2010 Samsung Electronics Co. Ltd
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <plat/devs.h>
-
-static u64 audio_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device samsung_asoc_dma = {
- .name = "samsung-audio",
- .id = -1,
- .dev = {
- .dma_mask = &audio_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- }
-};
-EXPORT_SYMBOL(samsung_asoc_dma);
-
-struct platform_device samsung_asoc_idma = {
- .name = "samsung-idma",
- .id = -1,
- .dev = {
- .dma_mask = &audio_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- }
-};
-EXPORT_SYMBOL(samsung_asoc_idma);
#include <linux/gpio.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/io.h>
#include <linux/pwm_backlight.h>
+#include <linux/slab.h>
#include <plat/devs.h>
#include <plat/gpio-cfg.h>
+++ /dev/null
-/* linux/arch/arm/plat-s3c/dev-fb.c
- *
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C series device definition for framebuffer device
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <linux/gfp.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/fb.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-static struct resource s3c_fb_resource[] = {
- [0] = {
- .start = S3C_PA_FB,
- .end = S3C_PA_FB + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_LCD_VSYNC,
- .end = IRQ_LCD_VSYNC,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_LCD_FIFO,
- .end = IRQ_LCD_FIFO,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = IRQ_LCD_SYSTEM,
- .end = IRQ_LCD_SYSTEM,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device s3c_device_fb = {
- .name = "s3c-fb",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_fb_resource),
- .resource = s3c_fb_resource,
- .dev.dma_mask = &s3c_device_fb.dev.coherent_dma_mask,
- .dev.coherent_dma_mask = 0xffffffffUL,
-};
-
-void __init s3c_fb_set_platdata(struct s3c_fb_platdata *pd)
-{
- s3c_set_platdata(pd, sizeof(struct s3c_fb_platdata),
- &s3c_device_fb);
-}
+++ /dev/null
-/* linux/arch/arm/plat-s3c/dev-hsmmc.c
- *
- * Copyright (c) 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C series device definition for hsmmc devices
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mmc/host.h>
-
-#include <mach/map.h>
-#include <plat/sdhci.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#define S3C_SZ_HSMMC (0x1000)
-
-static struct resource s3c_hsmmc_resource[] = {
- [0] = {
- .start = S3C_PA_HSMMC0,
- .end = S3C_PA_HSMMC0 + S3C_SZ_HSMMC - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_HSMMC0,
- .end = IRQ_HSMMC0,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static u64 s3c_device_hsmmc_dmamask = 0xffffffffUL;
-
-struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata = {
- .max_width = 4,
- .host_caps = (MMC_CAP_4_BIT_DATA |
- MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
- .clk_type = S3C_SDHCI_CLK_DIV_INTERNAL,
-};
-
-struct platform_device s3c_device_hsmmc0 = {
- .name = "s3c-sdhci",
- .id = 0,
- .num_resources = ARRAY_SIZE(s3c_hsmmc_resource),
- .resource = s3c_hsmmc_resource,
- .dev = {
- .dma_mask = &s3c_device_hsmmc_dmamask,
- .coherent_dma_mask = 0xffffffffUL,
- .platform_data = &s3c_hsmmc0_def_platdata,
- },
-};
-
-void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd)
-{
- s3c_sdhci_set_platdata(pd, &s3c_hsmmc0_def_platdata);
-}
+++ /dev/null
-/* linux/arch/arm/plat-s3c/dev-hsmmc1.c
- *
- * Copyright (c) 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C series device definition for hsmmc device 1
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mmc/host.h>
-
-#include <mach/map.h>
-#include <plat/sdhci.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#define S3C_SZ_HSMMC (0x1000)
-
-static struct resource s3c_hsmmc1_resource[] = {
- [0] = {
- .start = S3C_PA_HSMMC1,
- .end = S3C_PA_HSMMC1 + S3C_SZ_HSMMC - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_HSMMC1,
- .end = IRQ_HSMMC1,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static u64 s3c_device_hsmmc1_dmamask = 0xffffffffUL;
-
-struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata = {
- .max_width = 4,
- .host_caps = (MMC_CAP_4_BIT_DATA |
- MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
- .clk_type = S3C_SDHCI_CLK_DIV_INTERNAL,
-};
-
-struct platform_device s3c_device_hsmmc1 = {
- .name = "s3c-sdhci",
- .id = 1,
- .num_resources = ARRAY_SIZE(s3c_hsmmc1_resource),
- .resource = s3c_hsmmc1_resource,
- .dev = {
- .dma_mask = &s3c_device_hsmmc1_dmamask,
- .coherent_dma_mask = 0xffffffffUL,
- .platform_data = &s3c_hsmmc1_def_platdata,
- },
-};
-
-void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd)
-{
- s3c_sdhci_set_platdata(pd, &s3c_hsmmc1_def_platdata);
-}
+++ /dev/null
-/* linux/arch/arm/plat-s3c/dev-hsmmc2.c
- *
- * Copyright (c) 2009 Samsung Electronics
- * Copyright (c) 2009 Maurus Cuelenaere
- *
- * Based on arch/arm/plat-s3c/dev-hsmmc1.c
- * original file Copyright (c) 2008 Simtec Electronics
- *
- * S3C series device definition for hsmmc device 2
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mmc/host.h>
-
-#include <mach/map.h>
-#include <plat/sdhci.h>
-#include <plat/devs.h>
-
-#define S3C_SZ_HSMMC (0x1000)
-
-static struct resource s3c_hsmmc2_resource[] = {
- [0] = {
- .start = S3C_PA_HSMMC2,
- .end = S3C_PA_HSMMC2 + S3C_SZ_HSMMC - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_HSMMC2,
- .end = IRQ_HSMMC2,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static u64 s3c_device_hsmmc2_dmamask = 0xffffffffUL;
-
-struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata = {
- .max_width = 4,
- .host_caps = (MMC_CAP_4_BIT_DATA |
- MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
- .clk_type = S3C_SDHCI_CLK_DIV_INTERNAL,
-};
-
-struct platform_device s3c_device_hsmmc2 = {
- .name = "s3c-sdhci",
- .id = 2,
- .num_resources = ARRAY_SIZE(s3c_hsmmc2_resource),
- .resource = s3c_hsmmc2_resource,
- .dev = {
- .dma_mask = &s3c_device_hsmmc2_dmamask,
- .coherent_dma_mask = 0xffffffffUL,
- .platform_data = &s3c_hsmmc2_def_platdata,
- },
-};
-
-void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd)
-{
- s3c_sdhci_set_platdata(pd, &s3c_hsmmc2_def_platdata);
-}
+++ /dev/null
-/* linux/arch/arm/plat-samsung/dev-hsmmc3.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright (c) 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * Based on arch/arm/plat-samsung/dev-hsmmc1.c
- *
- * Samsung device definition for hsmmc device 3
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mmc/host.h>
-
-#include <mach/map.h>
-#include <plat/sdhci.h>
-#include <plat/devs.h>
-
-#define S3C_SZ_HSMMC (0x1000)
-
-static struct resource s3c_hsmmc3_resource[] = {
- [0] = {
- .start = S3C_PA_HSMMC3,
- .end = S3C_PA_HSMMC3 + S3C_SZ_HSMMC - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_HSMMC3,
- .end = IRQ_HSMMC3,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static u64 s3c_device_hsmmc3_dmamask = 0xffffffffUL;
-
-struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata = {
- .max_width = 4,
- .host_caps = (MMC_CAP_4_BIT_DATA |
- MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
- .clk_type = S3C_SDHCI_CLK_DIV_INTERNAL,
-};
-
-struct platform_device s3c_device_hsmmc3 = {
- .name = "s3c-sdhci",
- .id = 3,
- .num_resources = ARRAY_SIZE(s3c_hsmmc3_resource),
- .resource = s3c_hsmmc3_resource,
- .dev = {
- .dma_mask = &s3c_device_hsmmc3_dmamask,
- .coherent_dma_mask = 0xffffffffUL,
- .platform_data = &s3c_hsmmc3_def_platdata,
- },
-};
-
-void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd)
-{
- s3c_sdhci_set_platdata(pd, &s3c_hsmmc3_def_platdata);
-}
+++ /dev/null
-/* linux/arch/arm/plat-samsung/dev-hwmon.c
- *
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * Adapted for HWMON by Maurus Cuelenaere
- *
- * Samsung series device definition for HWMON
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <plat/devs.h>
-#include <plat/hwmon.h>
-
-struct platform_device s3c_device_hwmon = {
- .name = "s3c-hwmon",
- .id = -1,
- .dev.parent = &s3c_device_adc.dev,
-};
-
-void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd)
-{
- s3c_set_platdata(pd, sizeof(struct s3c_hwmon_pdata),
- &s3c_device_hwmon);
-}
+++ /dev/null
-/* linux/arch/arm/plat-s3c/dev-i2c0.c
- *
- * Copyright 2008-2009 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C series device definition for i2c device 0
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/gfp.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/regs-iic.h>
-#include <plat/iic.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-static struct resource s3c_i2c_resource[] = {
- [0] = {
- .start = S3C_PA_IIC,
- .end = S3C_PA_IIC + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IIC,
- .end = IRQ_IIC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device s3c_device_i2c0 = {
- .name = "s3c2410-i2c",
-#ifdef CONFIG_S3C_DEV_I2C1
- .id = 0,
-#else
- .id = -1,
-#endif
- .num_resources = ARRAY_SIZE(s3c_i2c_resource),
- .resource = s3c_i2c_resource,
-};
-
-struct s3c2410_platform_i2c default_i2c_data __initdata = {
- .flags = 0,
- .slave_addr = 0x10,
- .frequency = 100*1000,
- .sda_delay = 100,
-};
-
-void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd)
-{
- struct s3c2410_platform_i2c *npd;
-
- if (!pd)
- pd = &default_i2c_data;
-
- npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
- &s3c_device_i2c0);
-
- if (!npd->cfg_gpio)
- npd->cfg_gpio = s3c_i2c0_cfg_gpio;
-}
+++ /dev/null
-/* linux/arch/arm/plat-s3c/dev-i2c1.c
- *
- * Copyright 2008-2009 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C series device definition for i2c device 1
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/gfp.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/regs-iic.h>
-#include <plat/iic.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-static struct resource s3c_i2c_resource[] = {
- [0] = {
- .start = S3C_PA_IIC1,
- .end = S3C_PA_IIC1 + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IIC1,
- .end = IRQ_IIC1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device s3c_device_i2c1 = {
- .name = "s3c2410-i2c",
- .id = 1,
- .num_resources = ARRAY_SIZE(s3c_i2c_resource),
- .resource = s3c_i2c_resource,
-};
-
-void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd)
-{
- struct s3c2410_platform_i2c *npd;
-
- if (!pd) {
- pd = &default_i2c_data;
- pd->bus_num = 1;
- }
-
- npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
- &s3c_device_i2c1);
-
- if (!npd->cfg_gpio)
- npd->cfg_gpio = s3c_i2c1_cfg_gpio;
-}
+++ /dev/null
-/* linux/arch/arm/plat-s3c/dev-i2c2.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S3C series device definition for i2c device 2
- *
- * Based on plat-samsung/dev-i2c0.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/gfp.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/regs-iic.h>
-#include <plat/iic.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-static struct resource s3c_i2c_resource[] = {
- [0] = {
- .start = S3C_PA_IIC2,
- .end = S3C_PA_IIC2 + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IIC2,
- .end = IRQ_IIC2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device s3c_device_i2c2 = {
- .name = "s3c2410-i2c",
- .id = 2,
- .num_resources = ARRAY_SIZE(s3c_i2c_resource),
- .resource = s3c_i2c_resource,
-};
-
-void __init s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *pd)
-{
- struct s3c2410_platform_i2c *npd;
-
- if (!pd) {
- pd = &default_i2c_data;
- pd->bus_num = 2;
- }
-
- npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
- &s3c_device_i2c2);
-
- if (!npd->cfg_gpio)
- npd->cfg_gpio = s3c_i2c2_cfg_gpio;
-}
+++ /dev/null
-/* linux/arch/arm/plat-samsung/dev-i2c3.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P series device definition for i2c device 3
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/gfp.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/regs-iic.h>
-#include <plat/iic.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-static struct resource s3c_i2c_resource[] = {
- [0] = {
- .start = S3C_PA_IIC3,
- .end = S3C_PA_IIC3 + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IIC3,
- .end = IRQ_IIC3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device s3c_device_i2c3 = {
- .name = "s3c2440-i2c",
- .id = 3,
- .num_resources = ARRAY_SIZE(s3c_i2c_resource),
- .resource = s3c_i2c_resource,
-};
-
-void __init s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *pd)
-{
- struct s3c2410_platform_i2c *npd;
-
- if (!pd) {
- pd = &default_i2c_data;
- pd->bus_num = 3;
- }
-
- npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
- &s3c_device_i2c3);
-
- if (!npd->cfg_gpio)
- npd->cfg_gpio = s3c_i2c3_cfg_gpio;
-}
+++ /dev/null
-/* linux/arch/arm/plat-samsung/dev-i2c4.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P series device definition for i2c device 3
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/gfp.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/regs-iic.h>
-#include <plat/iic.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-static struct resource s3c_i2c_resource[] = {
- [0] = {
- .start = S3C_PA_IIC4,
- .end = S3C_PA_IIC4 + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IIC4,
- .end = IRQ_IIC4,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device s3c_device_i2c4 = {
- .name = "s3c2440-i2c",
- .id = 4,
- .num_resources = ARRAY_SIZE(s3c_i2c_resource),
- .resource = s3c_i2c_resource,
-};
-
-void __init s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *pd)
-{
- struct s3c2410_platform_i2c *npd;
-
- if (!pd) {
- pd = &default_i2c_data;
- pd->bus_num = 4;
- }
-
- npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
- &s3c_device_i2c4);
-
- if (!npd->cfg_gpio)
- npd->cfg_gpio = s3c_i2c4_cfg_gpio;
-}
+++ /dev/null
-/* linux/arch/arm/plat-samsung/dev-i2c3.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P series device definition for i2c device 3
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/gfp.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/regs-iic.h>
-#include <plat/iic.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-static struct resource s3c_i2c_resource[] = {
- [0] = {
- .start = S3C_PA_IIC5,
- .end = S3C_PA_IIC5 + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IIC5,
- .end = IRQ_IIC5,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device s3c_device_i2c5 = {
- .name = "s3c2440-i2c",
- .id = 5,
- .num_resources = ARRAY_SIZE(s3c_i2c_resource),
- .resource = s3c_i2c_resource,
-};
-
-void __init s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *pd)
-{
- struct s3c2410_platform_i2c *npd;
-
- if (!pd) {
- pd = &default_i2c_data;
- pd->bus_num = 5;
- }
-
- npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
- &s3c_device_i2c5);
-
- if (!npd->cfg_gpio)
- npd->cfg_gpio = s3c_i2c5_cfg_gpio;
-}
+++ /dev/null
-/* linux/arch/arm/plat-samsung/dev-i2c6.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P series device definition for i2c device 6
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/gfp.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/regs-iic.h>
-#include <plat/iic.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-static struct resource s3c_i2c_resource[] = {
- [0] = {
- .start = S3C_PA_IIC6,
- .end = S3C_PA_IIC6 + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IIC6,
- .end = IRQ_IIC6,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device s3c_device_i2c6 = {
- .name = "s3c2440-i2c",
- .id = 6,
- .num_resources = ARRAY_SIZE(s3c_i2c_resource),
- .resource = s3c_i2c_resource,
-};
-
-void __init s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *pd)
-{
- struct s3c2410_platform_i2c *npd;
-
- if (!pd) {
- pd = &default_i2c_data;
- pd->bus_num = 6;
- }
-
- npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
- &s3c_device_i2c6);
-
- if (!npd->cfg_gpio)
- npd->cfg_gpio = s3c_i2c6_cfg_gpio;
-}
+++ /dev/null
-/* linux/arch/arm/plat-samsung/dev-i2c7.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P series device definition for i2c device 7
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/gfp.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/regs-iic.h>
-#include <plat/iic.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-static struct resource s3c_i2c_resource[] = {
- [0] = {
- .start = S3C_PA_IIC7,
- .end = S3C_PA_IIC7 + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IIC7,
- .end = IRQ_IIC7,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device s3c_device_i2c7 = {
- .name = "s3c2440-i2c",
- .id = 7,
- .num_resources = ARRAY_SIZE(s3c_i2c_resource),
- .resource = s3c_i2c_resource,
-};
-
-void __init s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *pd)
-{
- struct s3c2410_platform_i2c *npd;
-
- if (!pd) {
- pd = &default_i2c_data;
- pd->bus_num = 7;
- }
-
- npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
- &s3c_device_i2c7);
-
- if (!npd->cfg_gpio)
- npd->cfg_gpio = s3c_i2c7_cfg_gpio;
-}
+++ /dev/null
-/* linux/arch/arm/plat-samsung/dev-ide.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Samsung CF-ATA device definition.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-
-#include <mach/map.h>
-#include <plat/ata.h>
-#include <plat/devs.h>
-
-static struct resource s3c_cfcon_resource[] = {
- [0] = {
- .start = SAMSUNG_PA_CFCON,
- .end = SAMSUNG_PA_CFCON + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_CFCON,
- .end = IRQ_CFCON,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device s3c_device_cfcon = {
- .id = 0,
- .num_resources = ARRAY_SIZE(s3c_cfcon_resource),
- .resource = s3c_cfcon_resource,
-};
-
-void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata)
-{
- s3c_set_platdata(pdata, sizeof(struct s3c_ide_platdata),
- &s3c_device_cfcon);
-}
+++ /dev/null
-/*
- * linux/arch/arm/plat-samsung/dev-keypad.c
- *
- * Copyright (C) 2010 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/platform_device.h>
-#include <mach/irqs.h>
-#include <mach/map.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/keypad.h>
-
-static struct resource samsung_keypad_resources[] = {
- [0] = {
- .start = SAMSUNG_PA_KEYPAD,
- .end = SAMSUNG_PA_KEYPAD + 0x20 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_KEYPAD,
- .end = IRQ_KEYPAD,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device samsung_device_keypad = {
- .name = "samsung-keypad",
- .id = -1,
- .num_resources = ARRAY_SIZE(samsung_keypad_resources),
- .resource = samsung_keypad_resources,
-};
-
-void __init samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd)
-{
- struct samsung_keypad_platdata *npd;
-
- npd = s3c_set_platdata(pd, sizeof(struct samsung_keypad_platdata),
- &samsung_device_keypad);
-
- if (!npd->cfg_gpio)
- npd->cfg_gpio = samsung_keypad_cfg_gpio;
-}
+++ /dev/null
-/*
- * S3C series device definition for nand device
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/gfp.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <mach/map.h>
-#include <plat/devs.h>
-#include <plat/nand.h>
-
-static struct resource s3c_nand_resource[] = {
- [0] = {
- .start = S3C_PA_NAND,
- .end = S3C_PA_NAND + SZ_1M,
- .flags = IORESOURCE_MEM,
- }
-};
-
-struct platform_device s3c_device_nand = {
- .name = "s3c2410-nand",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_nand_resource),
- .resource = s3c_nand_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_nand);
-
-/**
- * s3c_nand_copy_set() - copy nand set data
- * @set: The new structure, directly copied from the old.
- *
- * Copy all the fields from the NAND set field from what is probably __initdata
- * to new kernel memory. The code returns 0 if the copy happened correctly or
- * an error code for the calling function to display.
- *
- * Note, we currently do not try and look to see if we've already copied the
- * data in a previous set.
- */
-static int __init s3c_nand_copy_set(struct s3c2410_nand_set *set)
-{
- void *ptr;
- int size;
-
- size = sizeof(struct mtd_partition) * set->nr_partitions;
- if (size) {
- ptr = kmemdup(set->partitions, size, GFP_KERNEL);
- set->partitions = ptr;
-
- if (!ptr)
- return -ENOMEM;
- }
-
- if (set->nr_map && set->nr_chips) {
- size = sizeof(int) * set->nr_chips;
- ptr = kmemdup(set->nr_map, size, GFP_KERNEL);
- set->nr_map = ptr;
-
- if (!ptr)
- return -ENOMEM;
- }
-
- if (set->ecc_layout) {
- ptr = kmemdup(set->ecc_layout,
- sizeof(struct nand_ecclayout), GFP_KERNEL);
- set->ecc_layout = ptr;
-
- if (!ptr)
- return -ENOMEM;
- }
-
- return 0;
-}
-
-void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand)
-{
- struct s3c2410_platform_nand *npd;
- int size;
- int ret;
-
- /* note, if we get a failure in allocation, we simply drop out of the
- * function. If there is so little memory available at initialisation
- * time then there is little chance the system is going to run.
- */
-
- npd = s3c_set_platdata(nand, sizeof(struct s3c2410_platform_nand),
- &s3c_device_nand);
- if (!npd)
- return;
-
- /* now see if we need to copy any of the nand set data */
-
- size = sizeof(struct s3c2410_nand_set) * npd->nr_sets;
- if (size) {
- struct s3c2410_nand_set *from = npd->sets;
- struct s3c2410_nand_set *to;
- int i;
-
- to = kmemdup(from, size, GFP_KERNEL);
- npd->sets = to; /* set, even if we failed */
-
- if (!to) {
- printk(KERN_ERR "%s: no memory for sets\n", __func__);
- return;
- }
-
- for (i = 0; i < npd->nr_sets; i++) {
- ret = s3c_nand_copy_set(to);
- if (ret) {
- printk(KERN_ERR "%s: failed to copy set %d\n",
- __func__, i);
- return;
- }
- to++;
- }
- }
-}
+++ /dev/null
-/*
- * linux/arch/arm/plat-samsung/dev-onenand.c
- *
- * Copyright (c) 2008-2010 Samsung Electronics
- * Kyungmin Park <kyungmin.park@samsung.com>
- *
- * S3C64XX/S5PC100 series device definition for OneNAND devices
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-static struct resource s3c_onenand_resources[] = {
- [0] = {
- .start = S3C_PA_ONENAND,
- .end = S3C_PA_ONENAND + 0x400 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = S3C_PA_ONENAND_BUF,
- .end = S3C_PA_ONENAND_BUF + S3C_SZ_ONENAND_BUF - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = IRQ_ONENAND,
- .end = IRQ_ONENAND,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device s3c_device_onenand = {
- .name = "samsung-onenand",
- .id = 0,
- .num_resources = ARRAY_SIZE(s3c_onenand_resources),
- .resource = s3c_onenand_resources,
-};
+++ /dev/null
-/* linux/arch/arm/plat-samsung/dev-pwm.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright (c) 2007 Ben Dooks
- * Copyright (c) 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
- *
- * S3C series device definition for the PWM timer
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-
-#include <plat/devs.h>
-
-#define TIMER_RESOURCE_SIZE (1)
-
-#define TIMER_RESOURCE(_tmr, _irq) \
- (struct resource [TIMER_RESOURCE_SIZE]) { \
- [0] = { \
- .start = _irq, \
- .end = _irq, \
- .flags = IORESOURCE_IRQ \
- } \
- }
-
-#define DEFINE_S3C_TIMER(_tmr_no, _irq) \
- .name = "s3c24xx-pwm", \
- .id = _tmr_no, \
- .num_resources = TIMER_RESOURCE_SIZE, \
- .resource = TIMER_RESOURCE(_tmr_no, _irq), \
-
-/*
- * since we already have an static mapping for the timer,
- * we do not bother setting any IO resource for the base.
- */
-
-struct platform_device s3c_device_timer[] = {
- [0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) },
- [1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) },
- [2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) },
- [3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) },
- [4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) },
-};
-EXPORT_SYMBOL(s3c_device_timer);
+++ /dev/null
-/* linux/arch/arm/plat-samsung/dev-rtc.c
- *
- * Copyright 2009 by Maurus Cuelenaere <mcuelenaere@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-
-static struct resource s3c_rtc_resource[] = {
- [0] = {
- .start = S3C_PA_RTC,
- .end = S3C_PA_RTC + 0xff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_RTC_ALARM,
- .end = IRQ_RTC_ALARM,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_RTC_TIC,
- .end = IRQ_RTC_TIC,
- .flags = IORESOURCE_IRQ
- }
-};
-
-struct platform_device s3c_device_rtc = {
- .name = "s3c64xx-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_rtc_resource),
- .resource = s3c_rtc_resource,
-};
-EXPORT_SYMBOL(s3c_device_rtc);
+++ /dev/null
-/* linux/arch/arm/mach-s3c64xx/dev-ts.c
- *
- * Copyright (c) 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
- *
- * Adapted by Maurus Cuelenaere for s3c64xx
- *
- * S3C64XX series device definition for touchscreen device
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-#include <plat/ts.h>
-
-static struct resource s3c_ts_resource[] = {
- [0] = {
- .start = SAMSUNG_PA_ADC,
- .end = SAMSUNG_PA_ADC + SZ_256 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_TC,
- .end = IRQ_TC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device s3c_device_ts = {
- .name = "s3c64xx-ts",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_ts_resource),
- .resource = s3c_ts_resource,
-};
-
-static struct s3c2410_ts_mach_info default_ts_data __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 2,
-};
-
-void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
-{
- if (!pd)
- pd = &default_ts_data;
-
- s3c_set_platdata(pd, sizeof(struct s3c2410_ts_mach_info),
- &s3c_device_ts);
-}
+++ /dev/null
-/* linux/arch/arm/plat-s3c/dev-usb-hsotg.c
- *
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C series device definition for USB high-speed UDC/OtG block
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-
-static struct resource s3c_usb_hsotg_resources[] = {
- [0] = {
- .start = S3C_PA_USB_HSOTG,
- .end = S3C_PA_USB_HSOTG + 0x10000 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_OTG,
- .end = IRQ_OTG,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 s3c_hsotg_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s3c_device_usb_hsotg = {
- .name = "s3c-hsotg",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_usb_hsotg_resources),
- .resource = s3c_usb_hsotg_resources,
- .dev = {
- .dma_mask = &s3c_hsotg_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
+++ /dev/null
-/* linux/arch/arm/plat-s3c/dev-usb.c
- *
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C series device definition for USB host
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/gfp.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-#include <plat/usb-control.h>
-
-static struct resource s3c_usb_resource[] = {
- [0] = {
- .start = S3C_PA_USBHOST,
- .end = S3C_PA_USBHOST + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_USBH,
- .end = IRQ_USBH,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static u64 s3c_device_usb_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_ohci = {
- .name = "s3c2410-ohci",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_usb_resource),
- .resource = s3c_usb_resource,
- .dev = {
- .dma_mask = &s3c_device_usb_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-
-EXPORT_SYMBOL(s3c_device_ohci);
-
-/**
- * s3c_ohci_set_platdata - initialise OHCI device platform data
- * @info: The platform data.
- *
- * This call copies the @info passed in and sets the device .platform_data
- * field to that copy. The @info is copied so that the original can be marked
- * __initdata.
- */
-void __init s3c_ohci_set_platdata(struct s3c2410_hcd_info *info)
-{
- s3c_set_platdata(info, sizeof(struct s3c2410_hcd_info),
- &s3c_device_ohci);
-}
+++ /dev/null
-/* linux/arch/arm/plat-samsung/dev-wdt.c
- *
- * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C series device definition for the watchdog timer
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-
-static struct resource s3c_wdt_resource[] = {
- [0] = {
- .start = S3C_PA_WDT,
- .end = S3C_PA_WDT + SZ_1K,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_WDT,
- .end = IRQ_WDT,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-struct platform_device s3c_device_wdt = {
- .name = "s3c2410-wdt",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_wdt_resource),
- .resource = s3c_wdt_resource,
-};
-EXPORT_SYMBOL(s3c_device_wdt);
--- /dev/null
+/* linux/arch/arm/plat-samsung/devs.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Base SAMSUNG platform device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/dma-mapping.h>
+#include <linux/fb.h>
+#include <linux/gfp.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mmc/host.h>
+#include <linux/ioport.h>
+
+#include <asm/irq.h>
+#include <asm/pmu.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/adc.h>
+#include <plat/ata.h>
+#include <plat/ehci.h>
+#include <plat/fb.h>
+#include <plat/fb-s3c2410.h>
+#include <plat/hwmon.h>
+#include <plat/iic.h>
+#include <plat/keypad.h>
+#include <plat/mci.h>
+#include <plat/nand.h>
+#include <plat/sdhci.h>
+#include <plat/ts.h>
+#include <plat/udc.h>
+#include <plat/usb-control.h>
+#include <plat/usb-phy.h>
+#include <plat/regs-iic.h>
+#include <plat/regs-serial.h>
+#include <plat/regs-spi.h>
+
+static u64 samsung_device_dma_mask = DMA_BIT_MASK(32);
+
+/* AC97 */
+#ifdef CONFIG_CPU_S3C2440
+static struct resource s3c_ac97_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C2440_PA_AC97, S3C2440_SZ_AC97),
+ [1] = DEFINE_RES_IRQ(IRQ_S3C244X_AC97),
+ [2] = DEFINE_RES_DMA_NAMED(DMACH_PCM_OUT, "PCM out"),
+ [3] = DEFINE_RES_DMA_NAMED(DMACH_PCM_IN, "PCM in"),
+ [4] = DEFINE_RES_DMA_NAMED(DMACH_MIC_IN, "Mic in"),
+};
+
+struct platform_device s3c_device_ac97 = {
+ .name = "samsung-ac97",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_ac97_resource),
+ .resource = s3c_ac97_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ }
+};
+#endif /* CONFIG_CPU_S3C2440 */
+
+/* ADC */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_adc_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C24XX_PA_ADC, S3C24XX_SZ_ADC),
+ [1] = DEFINE_RES_IRQ(IRQ_TC),
+ [2] = DEFINE_RES_IRQ(IRQ_ADC),
+};
+
+struct platform_device s3c_device_adc = {
+ .name = "s3c24xx-adc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_adc_resource),
+ .resource = s3c_adc_resource,
+};
+#endif /* CONFIG_PLAT_S3C24XX */
+
+#if defined(CONFIG_SAMSUNG_DEV_ADC)
+static struct resource s3c_adc_resource[] = {
+ [0] = DEFINE_RES_MEM(SAMSUNG_PA_ADC, SZ_256),
+ [1] = DEFINE_RES_IRQ(IRQ_TC),
+ [2] = DEFINE_RES_IRQ(IRQ_ADC),
+};
+
+struct platform_device s3c_device_adc = {
+ .name = "samsung-adc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_adc_resource),
+ .resource = s3c_adc_resource,
+};
+#endif /* CONFIG_SAMSUNG_DEV_ADC */
+
+/* Camif Controller */
+
+#ifdef CONFIG_CPU_S3C2440
+static struct resource s3c_camif_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C2440_PA_CAMIF, S3C2440_SZ_CAMIF),
+ [1] = DEFINE_RES_IRQ(IRQ_CAM),
+};
+
+struct platform_device s3c_device_camif = {
+ .name = "s3c2440-camif",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_camif_resource),
+ .resource = s3c_camif_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ }
+};
+#endif /* CONFIG_CPU_S3C2440 */
+
+/* ASOC DMA */
+
+struct platform_device samsung_asoc_dma = {
+ .name = "samsung-audio",
+ .id = -1,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ }
+};
+
+struct platform_device samsung_asoc_idma = {
+ .name = "samsung-idma",
+ .id = -1,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ }
+};
+
+/* FB */
+
+#ifdef CONFIG_S3C_DEV_FB
+static struct resource s3c_fb_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_FB, SZ_16K),
+ [1] = DEFINE_RES_IRQ(IRQ_LCD_VSYNC),
+ [2] = DEFINE_RES_IRQ(IRQ_LCD_FIFO),
+ [3] = DEFINE_RES_IRQ(IRQ_LCD_SYSTEM),
+};
+
+struct platform_device s3c_device_fb = {
+ .name = "s3c-fb",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_fb_resource),
+ .resource = s3c_fb_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+void __init s3c_fb_set_platdata(struct s3c_fb_platdata *pd)
+{
+ s3c_set_platdata(pd, sizeof(struct s3c_fb_platdata),
+ &s3c_device_fb);
+}
+#endif /* CONFIG_S3C_DEV_FB */
+
+/* FIMC */
+
+#ifdef CONFIG_S5P_DEV_FIMC0
+static struct resource s5p_fimc0_resource[] = {
+ [0] = DEFINE_RES_MEM(S5P_PA_FIMC0, SZ_4K),
+ [1] = DEFINE_RES_IRQ(IRQ_FIMC0),
+};
+
+struct platform_device s5p_device_fimc0 = {
+ .name = "s5p-fimc",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s5p_fimc0_resource),
+ .resource = s5p_fimc0_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+struct platform_device s5p_device_fimc_md = {
+ .name = "s5p-fimc-md",
+ .id = -1,
+};
+#endif /* CONFIG_S5P_DEV_FIMC0 */
+
+#ifdef CONFIG_S5P_DEV_FIMC1
+static struct resource s5p_fimc1_resource[] = {
+ [0] = DEFINE_RES_MEM(S5P_PA_FIMC1, SZ_4K),
+ [1] = DEFINE_RES_IRQ(IRQ_FIMC1),
+};
+
+struct platform_device s5p_device_fimc1 = {
+ .name = "s5p-fimc",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s5p_fimc1_resource),
+ .resource = s5p_fimc1_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+#endif /* CONFIG_S5P_DEV_FIMC1 */
+
+#ifdef CONFIG_S5P_DEV_FIMC2
+static struct resource s5p_fimc2_resource[] = {
+ [0] = DEFINE_RES_MEM(S5P_PA_FIMC2, SZ_4K),
+ [1] = DEFINE_RES_IRQ(IRQ_FIMC2),
+};
+
+struct platform_device s5p_device_fimc2 = {
+ .name = "s5p-fimc",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(s5p_fimc2_resource),
+ .resource = s5p_fimc2_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+#endif /* CONFIG_S5P_DEV_FIMC2 */
+
+#ifdef CONFIG_S5P_DEV_FIMC3
+static struct resource s5p_fimc3_resource[] = {
+ [0] = DEFINE_RES_MEM(S5P_PA_FIMC3, SZ_4K),
+ [1] = DEFINE_RES_IRQ(IRQ_FIMC3),
+};
+
+struct platform_device s5p_device_fimc3 = {
+ .name = "s5p-fimc",
+ .id = 3,
+ .num_resources = ARRAY_SIZE(s5p_fimc3_resource),
+ .resource = s5p_fimc3_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+#endif /* CONFIG_S5P_DEV_FIMC3 */
+
+/* FIMD0 */
+
+#ifdef CONFIG_S5P_DEV_FIMD0
+static struct resource s5p_fimd0_resource[] = {
+ [0] = DEFINE_RES_MEM(S5P_PA_FIMD0, SZ_32K),
+ [1] = DEFINE_RES_IRQ(IRQ_FIMD0_VSYNC),
+ [2] = DEFINE_RES_IRQ(IRQ_FIMD0_FIFO),
+ [3] = DEFINE_RES_IRQ(IRQ_FIMD0_SYSTEM),
+};
+
+struct platform_device s5p_device_fimd0 = {
+ .name = "s5p-fb",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s5p_fimd0_resource),
+ .resource = s5p_fimd0_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+void __init s5p_fimd0_set_platdata(struct s3c_fb_platdata *pd)
+{
+ s3c_set_platdata(pd, sizeof(struct s3c_fb_platdata),
+ &s5p_device_fimd0);
+}
+#endif /* CONFIG_S5P_DEV_FIMD0 */
+
+/* HWMON */
+
+#ifdef CONFIG_S3C_DEV_HWMON
+struct platform_device s3c_device_hwmon = {
+ .name = "s3c-hwmon",
+ .id = -1,
+ .dev.parent = &s3c_device_adc.dev,
+};
+
+void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd)
+{
+ s3c_set_platdata(pd, sizeof(struct s3c_hwmon_pdata),
+ &s3c_device_hwmon);
+}
+#endif /* CONFIG_S3C_DEV_HWMON */
+
+/* HSMMC */
+
+#ifdef CONFIG_S3C_DEV_HSMMC
+static struct resource s3c_hsmmc_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_HSMMC0, SZ_4K),
+ [1] = DEFINE_RES_IRQ(IRQ_HSMMC0),
+};
+
+struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata = {
+ .max_width = 4,
+ .host_caps = (MMC_CAP_4_BIT_DATA |
+ MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+ .clk_type = S3C_SDHCI_CLK_DIV_INTERNAL,
+};
+
+struct platform_device s3c_device_hsmmc0 = {
+ .name = "s3c-sdhci",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s3c_hsmmc_resource),
+ .resource = s3c_hsmmc_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &s3c_hsmmc0_def_platdata,
+ },
+};
+
+void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+ s3c_sdhci_set_platdata(pd, &s3c_hsmmc0_def_platdata);
+}
+#endif /* CONFIG_S3C_DEV_HSMMC */
+
+#ifdef CONFIG_S3C_DEV_HSMMC1
+static struct resource s3c_hsmmc1_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_HSMMC1, SZ_4K),
+ [1] = DEFINE_RES_IRQ(IRQ_HSMMC1),
+};
+
+struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata = {
+ .max_width = 4,
+ .host_caps = (MMC_CAP_4_BIT_DATA |
+ MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+ .clk_type = S3C_SDHCI_CLK_DIV_INTERNAL,
+};
+
+struct platform_device s3c_device_hsmmc1 = {
+ .name = "s3c-sdhci",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s3c_hsmmc1_resource),
+ .resource = s3c_hsmmc1_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &s3c_hsmmc1_def_platdata,
+ },
+};
+
+void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+ s3c_sdhci_set_platdata(pd, &s3c_hsmmc1_def_platdata);
+}
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+
+/* HSMMC2 */
+
+#ifdef CONFIG_S3C_DEV_HSMMC2
+static struct resource s3c_hsmmc2_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_HSMMC2, SZ_4K),
+ [1] = DEFINE_RES_IRQ(IRQ_HSMMC2),
+};
+
+struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata = {
+ .max_width = 4,
+ .host_caps = (MMC_CAP_4_BIT_DATA |
+ MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+ .clk_type = S3C_SDHCI_CLK_DIV_INTERNAL,
+};
+
+struct platform_device s3c_device_hsmmc2 = {
+ .name = "s3c-sdhci",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(s3c_hsmmc2_resource),
+ .resource = s3c_hsmmc2_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &s3c_hsmmc2_def_platdata,
+ },
+};
+
+void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+ s3c_sdhci_set_platdata(pd, &s3c_hsmmc2_def_platdata);
+}
+#endif /* CONFIG_S3C_DEV_HSMMC2 */
+
+#ifdef CONFIG_S3C_DEV_HSMMC3
+static struct resource s3c_hsmmc3_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_HSMMC3, SZ_4K),
+ [1] = DEFINE_RES_IRQ(IRQ_HSMMC3),
+};
+
+struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata = {
+ .max_width = 4,
+ .host_caps = (MMC_CAP_4_BIT_DATA |
+ MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+ .clk_type = S3C_SDHCI_CLK_DIV_INTERNAL,
+};
+
+struct platform_device s3c_device_hsmmc3 = {
+ .name = "s3c-sdhci",
+ .id = 3,
+ .num_resources = ARRAY_SIZE(s3c_hsmmc3_resource),
+ .resource = s3c_hsmmc3_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &s3c_hsmmc3_def_platdata,
+ },
+};
+
+void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+ s3c_sdhci_set_platdata(pd, &s3c_hsmmc3_def_platdata);
+}
+#endif /* CONFIG_S3C_DEV_HSMMC3 */
+
+/* I2C */
+
+static struct resource s3c_i2c0_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_IIC, SZ_4K),
+ [1] = DEFINE_RES_IRQ(IRQ_IIC),
+};
+
+struct platform_device s3c_device_i2c0 = {
+ .name = "s3c2410-i2c",
+#ifdef CONFIG_S3C_DEV_I2C1
+ .id = 0,
+#else
+ .id = -1,
+#endif
+ .num_resources = ARRAY_SIZE(s3c_i2c0_resource),
+ .resource = s3c_i2c0_resource,
+};
+
+struct s3c2410_platform_i2c default_i2c_data __initdata = {
+ .flags = 0,
+ .slave_addr = 0x10,
+ .frequency = 100*1000,
+ .sda_delay = 100,
+};
+
+void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd;
+
+ if (!pd)
+ pd = &default_i2c_data;
+
+ npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
+ &s3c_device_i2c0);
+
+ if (!npd->cfg_gpio)
+ npd->cfg_gpio = s3c_i2c0_cfg_gpio;
+}
+
+#ifdef CONFIG_S3C_DEV_I2C1
+static struct resource s3c_i2c1_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_IIC1, SZ_4K),
+ [1] = DEFINE_RES_IRQ(IRQ_IIC1),
+};
+
+struct platform_device s3c_device_i2c1 = {
+ .name = "s3c2410-i2c",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s3c_i2c1_resource),
+ .resource = s3c_i2c1_resource,
+};
+
+void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd;
+
+ if (!pd) {
+ pd = &default_i2c_data;
+ pd->bus_num = 1;
+ }
+
+ npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
+ &s3c_device_i2c1);
+
+ if (!npd->cfg_gpio)
+ npd->cfg_gpio = s3c_i2c1_cfg_gpio;
+}
+#endif /* CONFIG_S3C_DEV_I2C1 */
+
+#ifdef CONFIG_S3C_DEV_I2C2
+static struct resource s3c_i2c2_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_IIC2, SZ_4K),
+ [1] = DEFINE_RES_IRQ(IRQ_IIC2),
+};
+
+struct platform_device s3c_device_i2c2 = {
+ .name = "s3c2410-i2c",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(s3c_i2c2_resource),
+ .resource = s3c_i2c2_resource,
+};
+
+void __init s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd;
+
+ if (!pd) {
+ pd = &default_i2c_data;
+ pd->bus_num = 2;
+ }
+
+ npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
+ &s3c_device_i2c2);
+
+ if (!npd->cfg_gpio)
+ npd->cfg_gpio = s3c_i2c2_cfg_gpio;
+}
+#endif /* CONFIG_S3C_DEV_I2C2 */
+
+#ifdef CONFIG_S3C_DEV_I2C3
+static struct resource s3c_i2c3_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_IIC3, SZ_4K),
+ [1] = DEFINE_RES_IRQ(IRQ_IIC3),
+};
+
+struct platform_device s3c_device_i2c3 = {
+ .name = "s3c2440-i2c",
+ .id = 3,
+ .num_resources = ARRAY_SIZE(s3c_i2c3_resource),
+ .resource = s3c_i2c3_resource,
+};
+
+void __init s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd;
+
+ if (!pd) {
+ pd = &default_i2c_data;
+ pd->bus_num = 3;
+ }
+
+ npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
+ &s3c_device_i2c3);
+
+ if (!npd->cfg_gpio)
+ npd->cfg_gpio = s3c_i2c3_cfg_gpio;
+}
+#endif /*CONFIG_S3C_DEV_I2C3 */
+
+#ifdef CONFIG_S3C_DEV_I2C4
+static struct resource s3c_i2c4_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_IIC4, SZ_4K),
+ [1] = DEFINE_RES_IRQ(IRQ_IIC4),
+};
+
+struct platform_device s3c_device_i2c4 = {
+ .name = "s3c2440-i2c",
+ .id = 4,
+ .num_resources = ARRAY_SIZE(s3c_i2c4_resource),
+ .resource = s3c_i2c4_resource,
+};
+
+void __init s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd;
+
+ if (!pd) {
+ pd = &default_i2c_data;
+ pd->bus_num = 4;
+ }
+
+ npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
+ &s3c_device_i2c4);
+
+ if (!npd->cfg_gpio)
+ npd->cfg_gpio = s3c_i2c4_cfg_gpio;
+}
+#endif /*CONFIG_S3C_DEV_I2C4 */
+
+#ifdef CONFIG_S3C_DEV_I2C5
+static struct resource s3c_i2c5_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_IIC5, SZ_4K),
+ [1] = DEFINE_RES_IRQ(IRQ_IIC5),
+};
+
+struct platform_device s3c_device_i2c5 = {
+ .name = "s3c2440-i2c",
+ .id = 5,
+ .num_resources = ARRAY_SIZE(s3c_i2c5_resource),
+ .resource = s3c_i2c5_resource,
+};
+
+void __init s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd;
+
+ if (!pd) {
+ pd = &default_i2c_data;
+ pd->bus_num = 5;
+ }
+
+ npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
+ &s3c_device_i2c5);
+
+ if (!npd->cfg_gpio)
+ npd->cfg_gpio = s3c_i2c5_cfg_gpio;
+}
+#endif /*CONFIG_S3C_DEV_I2C5 */
+
+#ifdef CONFIG_S3C_DEV_I2C6
+static struct resource s3c_i2c6_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_IIC6, SZ_4K),
+ [1] = DEFINE_RES_IRQ(IRQ_IIC6),
+};
+
+struct platform_device s3c_device_i2c6 = {
+ .name = "s3c2440-i2c",
+ .id = 6,
+ .num_resources = ARRAY_SIZE(s3c_i2c6_resource),
+ .resource = s3c_i2c6_resource,
+};
+
+void __init s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd;
+
+ if (!pd) {
+ pd = &default_i2c_data;
+ pd->bus_num = 6;
+ }
+
+ npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
+ &s3c_device_i2c6);
+
+ if (!npd->cfg_gpio)
+ npd->cfg_gpio = s3c_i2c6_cfg_gpio;
+}
+#endif /* CONFIG_S3C_DEV_I2C6 */
+
+#ifdef CONFIG_S3C_DEV_I2C7
+static struct resource s3c_i2c7_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_IIC7, SZ_4K),
+ [1] = DEFINE_RES_IRQ(IRQ_IIC7),
+};
+
+struct platform_device s3c_device_i2c7 = {
+ .name = "s3c2440-i2c",
+ .id = 7,
+ .num_resources = ARRAY_SIZE(s3c_i2c7_resource),
+ .resource = s3c_i2c7_resource,
+};
+
+void __init s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd;
+
+ if (!pd) {
+ pd = &default_i2c_data;
+ pd->bus_num = 7;
+ }
+
+ npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
+ &s3c_device_i2c7);
+
+ if (!npd->cfg_gpio)
+ npd->cfg_gpio = s3c_i2c7_cfg_gpio;
+}
+#endif /* CONFIG_S3C_DEV_I2C7 */
+
+/* I2C HDMIPHY */
+
+#ifdef CONFIG_S5P_DEV_I2C_HDMIPHY
+static struct resource s5p_i2c_resource[] = {
+ [0] = DEFINE_RES_MEM(S5P_PA_IIC_HDMIPHY, SZ_4K),
+ [1] = DEFINE_RES_IRQ(IRQ_IIC_HDMIPHY),
+};
+
+struct platform_device s5p_device_i2c_hdmiphy = {
+ .name = "s3c2440-hdmiphy-i2c",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s5p_i2c_resource),
+ .resource = s5p_i2c_resource,
+};
+
+void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd;
+
+ if (!pd) {
+ pd = &default_i2c_data;
+
+ if (soc_is_exynos4210())
+ pd->bus_num = 8;
+ else if (soc_is_s5pv210())
+ pd->bus_num = 3;
+ else
+ pd->bus_num = 0;
+ }
+
+ npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
+ &s5p_device_i2c_hdmiphy);
+}
+#endif /* CONFIG_S5P_DEV_I2C_HDMIPHY */
+
+/* I2S */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_iis_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C24XX_PA_IIS, S3C24XX_SZ_IIS),
+};
+
+struct platform_device s3c_device_iis = {
+ .name = "s3c24xx-iis",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_iis_resource),
+ .resource = s3c_iis_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ }
+};
+#endif /* CONFIG_PLAT_S3C24XX */
+
+#ifdef CONFIG_CPU_S3C2440
+struct platform_device s3c2412_device_iis = {
+ .name = "s3c2412-iis",
+ .id = -1,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ }
+};
+#endif /* CONFIG_CPU_S3C2440 */
+
+/* IDE CFCON */
+
+#ifdef CONFIG_SAMSUNG_DEV_IDE
+static struct resource s3c_cfcon_resource[] = {
+ [0] = DEFINE_RES_MEM(SAMSUNG_PA_CFCON, SZ_16K),
+ [1] = DEFINE_RES_IRQ(IRQ_CFCON),
+};
+
+struct platform_device s3c_device_cfcon = {
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s3c_cfcon_resource),
+ .resource = s3c_cfcon_resource,
+};
+
+void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata)
+{
+ s3c_set_platdata(pdata, sizeof(struct s3c_ide_platdata),
+ &s3c_device_cfcon);
+}
+#endif /* CONFIG_SAMSUNG_DEV_IDE */
+
+/* KEYPAD */
+
+#ifdef CONFIG_SAMSUNG_DEV_KEYPAD
+static struct resource samsung_keypad_resources[] = {
+ [0] = DEFINE_RES_MEM(SAMSUNG_PA_KEYPAD, SZ_32),
+ [1] = DEFINE_RES_IRQ(IRQ_KEYPAD),
+};
+
+struct platform_device samsung_device_keypad = {
+ .name = "samsung-keypad",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(samsung_keypad_resources),
+ .resource = samsung_keypad_resources,
+};
+
+void __init samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd)
+{
+ struct samsung_keypad_platdata *npd;
+
+ npd = s3c_set_platdata(pd, sizeof(struct samsung_keypad_platdata),
+ &samsung_device_keypad);
+
+ if (!npd->cfg_gpio)
+ npd->cfg_gpio = samsung_keypad_cfg_gpio;
+}
+#endif /* CONFIG_SAMSUNG_DEV_KEYPAD */
+
+/* LCD Controller */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_lcd_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C24XX_PA_LCD, S3C24XX_SZ_LCD),
+ [1] = DEFINE_RES_IRQ(IRQ_LCD),
+};
+
+struct platform_device s3c_device_lcd = {
+ .name = "s3c2410-lcd",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_lcd_resource),
+ .resource = s3c_lcd_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ }
+};
+
+void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
+{
+ struct s3c2410fb_mach_info *npd;
+
+ npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_lcd);
+ if (npd) {
+ npd->displays = kmemdup(pd->displays,
+ sizeof(struct s3c2410fb_display) * npd->num_displays,
+ GFP_KERNEL);
+ if (!npd->displays)
+ printk(KERN_ERR "no memory for LCD display data\n");
+ } else {
+ printk(KERN_ERR "no memory for LCD platform data\n");
+ }
+}
+#endif /* CONFIG_PLAT_S3C24XX */
+
+/* MFC */
+
+#ifdef CONFIG_S5P_DEV_MFC
+static struct resource s5p_mfc_resource[] = {
+ [0] = DEFINE_RES_MEM(S5P_PA_MFC, SZ_64K),
+ [1] = DEFINE_RES_IRQ(IRQ_MFC),
+};
+
+struct platform_device s5p_device_mfc = {
+ .name = "s5p-mfc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s5p_mfc_resource),
+ .resource = s5p_mfc_resource,
+};
+
+/*
+ * MFC hardware has 2 memory interfaces which are modelled as two separate
+ * platform devices to let dma-mapping distinguish between them.
+ *
+ * MFC parent device (s5p_device_mfc) must be registered before memory
+ * interface specific devices (s5p_device_mfc_l and s5p_device_mfc_r).
+ */
+
+struct platform_device s5p_device_mfc_l = {
+ .name = "s5p-mfc-l",
+ .id = -1,
+ .dev = {
+ .parent = &s5p_device_mfc.dev,
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+struct platform_device s5p_device_mfc_r = {
+ .name = "s5p-mfc-r",
+ .id = -1,
+ .dev = {
+ .parent = &s5p_device_mfc.dev,
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+#endif /* CONFIG_S5P_DEV_MFC */
+
+/* MIPI CSIS */
+
+#ifdef CONFIG_S5P_DEV_CSIS0
+static struct resource s5p_mipi_csis0_resource[] = {
+ [0] = DEFINE_RES_MEM(S5P_PA_MIPI_CSIS0, SZ_4K),
+ [1] = DEFINE_RES_IRQ(IRQ_MIPI_CSIS0),
+};
+
+struct platform_device s5p_device_mipi_csis0 = {
+ .name = "s5p-mipi-csis",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s5p_mipi_csis0_resource),
+ .resource = s5p_mipi_csis0_resource,
+};
+#endif /* CONFIG_S5P_DEV_CSIS0 */
+
+#ifdef CONFIG_S5P_DEV_CSIS1
+static struct resource s5p_mipi_csis1_resource[] = {
+ [0] = DEFINE_RES_MEM(S5P_PA_MIPI_CSIS1, SZ_4K),
+ [1] = DEFINE_RES_IRQ(IRQ_MIPI_CSIS1),
+};
+
+struct platform_device s5p_device_mipi_csis1 = {
+ .name = "s5p-mipi-csis",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s5p_mipi_csis1_resource),
+ .resource = s5p_mipi_csis1_resource,
+};
+#endif
+
+/* NAND */
+
+#ifdef CONFIG_S3C_DEV_NAND
+static struct resource s3c_nand_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_NAND, SZ_1M),
+};
+
+struct platform_device s3c_device_nand = {
+ .name = "s3c2410-nand",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_nand_resource),
+ .resource = s3c_nand_resource,
+};
+
+/*
+ * s3c_nand_copy_set() - copy nand set data
+ * @set: The new structure, directly copied from the old.
+ *
+ * Copy all the fields from the NAND set field from what is probably __initdata
+ * to new kernel memory. The code returns 0 if the copy happened correctly or
+ * an error code for the calling function to display.
+ *
+ * Note, we currently do not try and look to see if we've already copied the
+ * data in a previous set.
+ */
+static int __init s3c_nand_copy_set(struct s3c2410_nand_set *set)
+{
+ void *ptr;
+ int size;
+
+ size = sizeof(struct mtd_partition) * set->nr_partitions;
+ if (size) {
+ ptr = kmemdup(set->partitions, size, GFP_KERNEL);
+ set->partitions = ptr;
+
+ if (!ptr)
+ return -ENOMEM;
+ }
+
+ if (set->nr_map && set->nr_chips) {
+ size = sizeof(int) * set->nr_chips;
+ ptr = kmemdup(set->nr_map, size, GFP_KERNEL);
+ set->nr_map = ptr;
+
+ if (!ptr)
+ return -ENOMEM;
+ }
+
+ if (set->ecc_layout) {
+ ptr = kmemdup(set->ecc_layout,
+ sizeof(struct nand_ecclayout), GFP_KERNEL);
+ set->ecc_layout = ptr;
+
+ if (!ptr)
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand)
+{
+ struct s3c2410_platform_nand *npd;
+ int size;
+ int ret;
+
+ /* note, if we get a failure in allocation, we simply drop out of the
+ * function. If there is so little memory available at initialisation
+ * time then there is little chance the system is going to run.
+ */
+
+ npd = s3c_set_platdata(nand, sizeof(struct s3c2410_platform_nand),
+ &s3c_device_nand);
+ if (!npd)
+ return;
+
+ /* now see if we need to copy any of the nand set data */
+
+ size = sizeof(struct s3c2410_nand_set) * npd->nr_sets;
+ if (size) {
+ struct s3c2410_nand_set *from = npd->sets;
+ struct s3c2410_nand_set *to;
+ int i;
+
+ to = kmemdup(from, size, GFP_KERNEL);
+ npd->sets = to; /* set, even if we failed */
+
+ if (!to) {
+ printk(KERN_ERR "%s: no memory for sets\n", __func__);
+ return;
+ }
+
+ for (i = 0; i < npd->nr_sets; i++) {
+ ret = s3c_nand_copy_set(to);
+ if (ret) {
+ printk(KERN_ERR "%s: failed to copy set %d\n",
+ __func__, i);
+ return;
+ }
+ to++;
+ }
+ }
+}
+#endif /* CONFIG_S3C_DEV_NAND */
+
+/* ONENAND */
+
+#ifdef CONFIG_S3C_DEV_ONENAND
+static struct resource s3c_onenand_resources[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_ONENAND, SZ_1K),
+ [1] = DEFINE_RES_MEM(S3C_PA_ONENAND_BUF, S3C_SZ_ONENAND_BUF),
+ [2] = DEFINE_RES_IRQ(IRQ_ONENAND),
+};
+
+struct platform_device s3c_device_onenand = {
+ .name = "samsung-onenand",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s3c_onenand_resources),
+ .resource = s3c_onenand_resources,
+};
+#endif /* CONFIG_S3C_DEV_ONENAND */
+
+#ifdef CONFIG_S3C64XX_DEV_ONENAND1
+static struct resource s3c64xx_onenand1_resources[] = {
+ [0] = DEFINE_RES_MEM(S3C64XX_PA_ONENAND1, SZ_1K),
+ [1] = DEFINE_RES_MEM(S3C64XX_PA_ONENAND1_BUF, S3C64XX_SZ_ONENAND1_BUF),
+ [2] = DEFINE_RES_IRQ(IRQ_ONENAND1),
+};
+
+struct platform_device s3c64xx_device_onenand1 = {
+ .name = "samsung-onenand",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s3c64xx_onenand1_resources),
+ .resource = s3c64xx_onenand1_resources,
+};
+
+void s3c64xx_onenand1_set_platdata(struct onenand_platform_data *pdata)
+{
+ s3c_set_platdata(pdata, sizeof(struct onenand_platform_data),
+ &s3c64xx_device_onenand1);
+}
+#endif /* CONFIG_S3C64XX_DEV_ONENAND1 */
+
+#ifdef CONFIG_S5P_DEV_ONENAND
+static struct resource s5p_onenand_resources[] = {
+ [0] = DEFINE_RES_MEM(S5P_PA_ONENAND, SZ_128K),
+ [1] = DEFINE_RES_MEM(S5P_PA_ONENAND_DMA, SZ_8K),
+ [2] = DEFINE_RES_IRQ(IRQ_ONENAND_AUDI),
+};
+
+struct platform_device s5p_device_onenand = {
+ .name = "s5pc110-onenand",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s5p_onenand_resources),
+ .resource = s5p_onenand_resources,
+};
+#endif /* CONFIG_S5P_DEV_ONENAND */
+
+/* PMU */
+
+#ifdef CONFIG_PLAT_S5P
+static struct resource s5p_pmu_resource[] = {
+ DEFINE_RES_IRQ(IRQ_PMU)
+};
+
+struct platform_device s5p_device_pmu = {
+ .name = "arm-pmu",
+ .id = ARM_PMU_DEVICE_CPU,
+ .num_resources = ARRAY_SIZE(s5p_pmu_resource),
+ .resource = s5p_pmu_resource,
+};
+
+static int __init s5p_pmu_init(void)
+{
+ platform_device_register(&s5p_device_pmu);
+ return 0;
+}
+arch_initcall(s5p_pmu_init);
+#endif /* CONFIG_PLAT_S5P */
+
+/* PWM Timer */
+
+#ifdef CONFIG_SAMSUNG_DEV_PWM
+
+#define TIMER_RESOURCE_SIZE (1)
+
+#define TIMER_RESOURCE(_tmr, _irq) \
+ (struct resource [TIMER_RESOURCE_SIZE]) { \
+ [0] = { \
+ .start = _irq, \
+ .end = _irq, \
+ .flags = IORESOURCE_IRQ \
+ } \
+ }
+
+#define DEFINE_S3C_TIMER(_tmr_no, _irq) \
+ .name = "s3c24xx-pwm", \
+ .id = _tmr_no, \
+ .num_resources = TIMER_RESOURCE_SIZE, \
+ .resource = TIMER_RESOURCE(_tmr_no, _irq), \
+
+/*
+ * since we already have an static mapping for the timer,
+ * we do not bother setting any IO resource for the base.
+ */
+
+struct platform_device s3c_device_timer[] = {
+ [0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) },
+ [1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) },
+ [2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) },
+ [3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) },
+ [4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) },
+};
+#endif /* CONFIG_SAMSUNG_DEV_PWM */
+
+/* RTC */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_rtc_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C24XX_PA_RTC, SZ_256),
+ [1] = DEFINE_RES_IRQ(IRQ_RTC),
+ [2] = DEFINE_RES_IRQ(IRQ_TICK),
+};
+
+struct platform_device s3c_device_rtc = {
+ .name = "s3c2410-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_rtc_resource),
+ .resource = s3c_rtc_resource,
+};
+#endif /* CONFIG_PLAT_S3C24XX */
+
+#ifdef CONFIG_S3C_DEV_RTC
+static struct resource s3c_rtc_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_RTC, SZ_256),
+ [1] = DEFINE_RES_IRQ(IRQ_RTC_ALARM),
+ [2] = DEFINE_RES_IRQ(IRQ_RTC_TIC),
+};
+
+struct platform_device s3c_device_rtc = {
+ .name = "s3c64xx-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_rtc_resource),
+ .resource = s3c_rtc_resource,
+};
+#endif /* CONFIG_S3C_DEV_RTC */
+
+/* SDI */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_sdi_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C24XX_PA_SDI, S3C24XX_SZ_SDI),
+ [1] = DEFINE_RES_IRQ(IRQ_SDI),
+};
+
+struct platform_device s3c_device_sdi = {
+ .name = "s3c2410-sdi",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_sdi_resource),
+ .resource = s3c_sdi_resource,
+};
+
+void __init s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata)
+{
+ s3c_set_platdata(pdata, sizeof(struct s3c24xx_mci_pdata),
+ &s3c_device_sdi);
+}
+#endif /* CONFIG_PLAT_S3C24XX */
+
+/* SPI */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_spi0_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C24XX_PA_SPI, SZ_32),
+ [1] = DEFINE_RES_IRQ(IRQ_SPI0),
+};
+
+struct platform_device s3c_device_spi0 = {
+ .name = "s3c2410-spi",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s3c_spi0_resource),
+ .resource = s3c_spi0_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ }
+};
+
+static struct resource s3c_spi1_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C24XX_PA_SPI1, SZ_32),
+ [1] = DEFINE_RES_IRQ(IRQ_SPI1),
+};
+
+struct platform_device s3c_device_spi1 = {
+ .name = "s3c2410-spi",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s3c_spi1_resource),
+ .resource = s3c_spi1_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ }
+};
+#endif /* CONFIG_PLAT_S3C24XX */
+
+/* Touchscreen */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_ts_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C24XX_PA_ADC, S3C24XX_SZ_ADC),
+ [1] = DEFINE_RES_IRQ(IRQ_TC),
+};
+
+struct platform_device s3c_device_ts = {
+ .name = "s3c2410-ts",
+ .id = -1,
+ .dev.parent = &s3c_device_adc.dev,
+ .num_resources = ARRAY_SIZE(s3c_ts_resource),
+ .resource = s3c_ts_resource,
+};
+
+void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_info)
+{
+ s3c_set_platdata(hard_s3c2410ts_info,
+ sizeof(struct s3c2410_ts_mach_info), &s3c_device_ts);
+}
+#endif /* CONFIG_PLAT_S3C24XX */
+
+#ifdef CONFIG_SAMSUNG_DEV_TS
+static struct resource s3c_ts_resource[] = {
+ [0] = DEFINE_RES_MEM(SAMSUNG_PA_ADC, SZ_256),
+ [1] = DEFINE_RES_IRQ(IRQ_TC),
+};
+
+static struct s3c2410_ts_mach_info default_ts_data __initdata = {
+ .delay = 10000,
+ .presc = 49,
+ .oversampling_shift = 2,
+};
+
+struct platform_device s3c_device_ts = {
+ .name = "s3c64xx-ts",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_ts_resource),
+ .resource = s3c_ts_resource,
+};
+
+void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
+{
+ if (!pd)
+ pd = &default_ts_data;
+
+ s3c_set_platdata(pd, sizeof(struct s3c2410_ts_mach_info),
+ &s3c_device_ts);
+}
+#endif /* CONFIG_SAMSUNG_DEV_TS */
+
+/* TV */
+
+#ifdef CONFIG_S5P_DEV_TV
+
+static struct resource s5p_hdmi_resources[] = {
+ [0] = DEFINE_RES_MEM(S5P_PA_HDMI, SZ_1M),
+ [1] = DEFINE_RES_IRQ(IRQ_HDMI),
+};
+
+struct platform_device s5p_device_hdmi = {
+ .name = "s5p-hdmi",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s5p_hdmi_resources),
+ .resource = s5p_hdmi_resources,
+};
+
+static struct resource s5p_sdo_resources[] = {
+ [0] = DEFINE_RES_MEM(S5P_PA_SDO, SZ_64K),
+ [1] = DEFINE_RES_IRQ(IRQ_SDO),
+};
+
+struct platform_device s5p_device_sdo = {
+ .name = "s5p-sdo",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s5p_sdo_resources),
+ .resource = s5p_sdo_resources,
+};
+
+static struct resource s5p_mixer_resources[] = {
+ [0] = DEFINE_RES_MEM_NAMED(S5P_PA_MIXER, SZ_64K, "mxr"),
+ [1] = DEFINE_RES_MEM_NAMED(S5P_PA_VP, SZ_64K, "vp"),
+ [2] = DEFINE_RES_IRQ_NAMED(IRQ_MIXER, "irq"),
+};
+
+struct platform_device s5p_device_mixer = {
+ .name = "s5p-mixer",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s5p_mixer_resources),
+ .resource = s5p_mixer_resources,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ }
+};
+#endif /* CONFIG_S5P_DEV_TV */
+
+/* USB */
+
+#ifdef CONFIG_S3C_DEV_USB_HOST
+static struct resource s3c_usb_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_USBHOST, SZ_256),
+ [1] = DEFINE_RES_IRQ(IRQ_USBH),
+};
+
+struct platform_device s3c_device_ohci = {
+ .name = "s3c2410-ohci",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_usb_resource),
+ .resource = s3c_usb_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ }
+};
+
+/*
+ * s3c_ohci_set_platdata - initialise OHCI device platform data
+ * @info: The platform data.
+ *
+ * This call copies the @info passed in and sets the device .platform_data
+ * field to that copy. The @info is copied so that the original can be marked
+ * __initdata.
+ */
+
+void __init s3c_ohci_set_platdata(struct s3c2410_hcd_info *info)
+{
+ s3c_set_platdata(info, sizeof(struct s3c2410_hcd_info),
+ &s3c_device_ohci);
+}
+#endif /* CONFIG_S3C_DEV_USB_HOST */
+
+/* USB Device (Gadget) */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_usbgadget_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C24XX_PA_USBDEV, S3C24XX_SZ_USBDEV),
+ [1] = DEFINE_RES_IRQ(IRQ_USBD),
+};
+
+struct platform_device s3c_device_usbgadget = {
+ .name = "s3c2410-usbgadget",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_usbgadget_resource),
+ .resource = s3c_usbgadget_resource,
+};
+
+void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *pd)
+{
+ s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usbgadget);
+}
+#endif /* CONFIG_PLAT_S3C24XX */
+
+/* USB EHCI Host Controller */
+
+#ifdef CONFIG_S5P_DEV_USB_EHCI
+static struct resource s5p_ehci_resource[] = {
+ [0] = DEFINE_RES_MEM(S5P_PA_EHCI, SZ_256),
+ [1] = DEFINE_RES_IRQ(IRQ_USB_HOST),
+};
+
+struct platform_device s5p_device_ehci = {
+ .name = "s5p-ehci",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s5p_ehci_resource),
+ .resource = s5p_ehci_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ }
+};
+
+void __init s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd)
+{
+ struct s5p_ehci_platdata *npd;
+
+ npd = s3c_set_platdata(pd, sizeof(struct s5p_ehci_platdata),
+ &s5p_device_ehci);
+
+ if (!npd->phy_init)
+ npd->phy_init = s5p_usb_phy_init;
+ if (!npd->phy_exit)
+ npd->phy_exit = s5p_usb_phy_exit;
+}
+#endif /* CONFIG_S5P_DEV_USB_EHCI */
+
+/* USB HSOTG */
+
+#ifdef CONFIG_S3C_DEV_USB_HSOTG
+static struct resource s3c_usb_hsotg_resources[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_16K),
+ [1] = DEFINE_RES_IRQ(IRQ_OTG),
+};
+
+struct platform_device s3c_device_usb_hsotg = {
+ .name = "s3c-hsotg",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_usb_hsotg_resources),
+ .resource = s3c_usb_hsotg_resources,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+#endif /* CONFIG_S3C_DEV_USB_HSOTG */
+
+/* USB High Spped 2.0 Device (Gadget) */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_hsudc_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C2416_PA_HSUDC, S3C2416_SZ_HSUDC),
+ [1] = DEFINE_RES_IRQ(IRQ_USBD),
+};
+
+struct platform_device s3c_device_usb_hsudc = {
+ .name = "s3c-hsudc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_hsudc_resource),
+ .resource = s3c_hsudc_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd)
+{
+ s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usb_hsudc);
+}
+#endif /* CONFIG_PLAT_S3C24XX */
+
+/* WDT */
+
+#ifdef CONFIG_S3C_DEV_WDT
+static struct resource s3c_wdt_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_WDT, SZ_1K),
+ [1] = DEFINE_RES_IRQ(IRQ_WDT),
+};
+
+struct platform_device s3c_device_wdt = {
+ .name = "s3c2410-wdt",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_wdt_resource),
+ .resource = s3c_wdt_resource,
+};
+#endif /* CONFIG_S3C_DEV_WDT */
#include <linux/errno.h>
#include <linux/amba/pl330.h>
#include <linux/scatterlist.h>
+#include <linux/export.h>
#include <mach/dma.h>
+++ /dev/null
-/* linux/arch/arm/plat-s3c/gpio-config.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008-2010 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C series GPIO configuration core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-int s3c_gpio_cfgpin(unsigned int pin, unsigned int config)
-{
- struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
- unsigned long flags;
- int offset;
- int ret;
-
- if (!chip)
- return -EINVAL;
-
- offset = pin - chip->chip.base;
-
- s3c_gpio_lock(chip, flags);
- ret = s3c_gpio_do_setcfg(chip, offset, config);
- s3c_gpio_unlock(chip, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(s3c_gpio_cfgpin);
-
-int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
- unsigned int cfg)
-{
- int ret;
-
- for (; nr > 0; nr--, start++) {
- ret = s3c_gpio_cfgpin(start, cfg);
- if (ret != 0)
- return ret;
- }
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(s3c_gpio_cfgpin_range);
-
-int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
- unsigned int cfg, s3c_gpio_pull_t pull)
-{
- int ret;
-
- for (; nr > 0; nr--, start++) {
- s3c_gpio_setpull(start, pull);
- ret = s3c_gpio_cfgpin(start, cfg);
- if (ret != 0)
- return ret;
- }
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range);
-
-unsigned s3c_gpio_getcfg(unsigned int pin)
-{
- struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
- unsigned long flags;
- unsigned ret = 0;
- int offset;
-
- if (chip) {
- offset = pin - chip->chip.base;
-
- s3c_gpio_lock(chip, flags);
- ret = s3c_gpio_do_getcfg(chip, offset);
- s3c_gpio_unlock(chip, flags);
- }
-
- return ret;
-}
-EXPORT_SYMBOL(s3c_gpio_getcfg);
-
-
-int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull)
-{
- struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
- unsigned long flags;
- int offset, ret;
-
- if (!chip)
- return -EINVAL;
-
- offset = pin - chip->chip.base;
-
- s3c_gpio_lock(chip, flags);
- ret = s3c_gpio_do_setpull(chip, offset, pull);
- s3c_gpio_unlock(chip, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(s3c_gpio_setpull);
-
-s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin)
-{
- struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
- unsigned long flags;
- int offset;
- u32 pup = 0;
-
- if (chip) {
- offset = pin - chip->chip.base;
-
- s3c_gpio_lock(chip, flags);
- pup = s3c_gpio_do_getpull(chip, offset);
- s3c_gpio_unlock(chip, flags);
- }
-
- return (__force s3c_gpio_pull_t)pup;
-}
-EXPORT_SYMBOL(s3c_gpio_getpull);
-
-#ifdef CONFIG_S3C_GPIO_CFG_S3C24XX
-int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
- unsigned int off, unsigned int cfg)
-{
- void __iomem *reg = chip->base;
- unsigned int shift = off;
- u32 con;
-
- if (s3c_gpio_is_cfg_special(cfg)) {
- cfg &= 0xf;
-
- /* Map output to 0, and SFN2 to 1 */
- cfg -= 1;
- if (cfg > 1)
- return -EINVAL;
-
- cfg <<= shift;
- }
-
- con = __raw_readl(reg);
- con &= ~(0x1 << shift);
- con |= cfg;
- __raw_writel(con, reg);
-
- return 0;
-}
-
-unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
- unsigned int off)
-{
- u32 con;
-
- con = __raw_readl(chip->base);
- con >>= off;
- con &= 1;
- con++;
-
- return S3C_GPIO_SFN(con);
-}
-
-int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip,
- unsigned int off, unsigned int cfg)
-{
- void __iomem *reg = chip->base;
- unsigned int shift = off * 2;
- u32 con;
-
- if (s3c_gpio_is_cfg_special(cfg)) {
- cfg &= 0xf;
- if (cfg > 3)
- return -EINVAL;
-
- cfg <<= shift;
- }
-
- con = __raw_readl(reg);
- con &= ~(0x3 << shift);
- con |= cfg;
- __raw_writel(con, reg);
-
- return 0;
-}
-
-unsigned int s3c_gpio_getcfg_s3c24xx(struct s3c_gpio_chip *chip,
- unsigned int off)
-{
- u32 con;
-
- con = __raw_readl(chip->base);
- con >>= off * 2;
- con &= 3;
-
- /* this conversion works for IN and OUT as well as special mode */
- return S3C_GPIO_SPECIAL(con);
-}
-#endif
-
-#ifdef CONFIG_S3C_GPIO_CFG_S3C64XX
-int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
- unsigned int off, unsigned int cfg)
-{
- void __iomem *reg = chip->base;
- unsigned int shift = (off & 7) * 4;
- u32 con;
-
- if (off < 8 && chip->chip.ngpio > 8)
- reg -= 4;
-
- if (s3c_gpio_is_cfg_special(cfg)) {
- cfg &= 0xf;
- cfg <<= shift;
- }
-
- con = __raw_readl(reg);
- con &= ~(0xf << shift);
- con |= cfg;
- __raw_writel(con, reg);
-
- return 0;
-}
-
-unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
- unsigned int off)
-{
- void __iomem *reg = chip->base;
- unsigned int shift = (off & 7) * 4;
- u32 con;
-
- if (off < 8 && chip->chip.ngpio > 8)
- reg -= 4;
-
- con = __raw_readl(reg);
- con >>= shift;
- con &= 0xf;
-
- /* this conversion works for IN and OUT as well as special mode */
- return S3C_GPIO_SPECIAL(con);
-}
-
-#endif /* CONFIG_S3C_GPIO_CFG_S3C64XX */
-
-#ifdef CONFIG_S3C_GPIO_PULL_UPDOWN
-int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip,
- unsigned int off, s3c_gpio_pull_t pull)
-{
- void __iomem *reg = chip->base + 0x08;
- int shift = off * 2;
- u32 pup;
-
- pup = __raw_readl(reg);
- pup &= ~(3 << shift);
- pup |= pull << shift;
- __raw_writel(pup, reg);
-
- return 0;
-}
-
-s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
- unsigned int off)
-{
- void __iomem *reg = chip->base + 0x08;
- int shift = off * 2;
- u32 pup = __raw_readl(reg);
-
- pup >>= shift;
- pup &= 0x3;
- return (__force s3c_gpio_pull_t)pup;
-}
-
-#ifdef CONFIG_S3C_GPIO_PULL_S3C2443
-int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip,
- unsigned int off, s3c_gpio_pull_t pull)
-{
- switch (pull) {
- case S3C_GPIO_PULL_NONE:
- pull = 0x01;
- break;
- case S3C_GPIO_PULL_UP:
- pull = 0x00;
- break;
- case S3C_GPIO_PULL_DOWN:
- pull = 0x02;
- break;
- }
- return s3c_gpio_setpull_updown(chip, off, pull);
-}
-
-s3c_gpio_pull_t s3c_gpio_getpull_s3c2443(struct s3c_gpio_chip *chip,
- unsigned int off)
-{
- s3c_gpio_pull_t pull;
-
- pull = s3c_gpio_getpull_updown(chip, off);
-
- switch (pull) {
- case 0x00:
- pull = S3C_GPIO_PULL_UP;
- break;
- case 0x01:
- case 0x03:
- pull = S3C_GPIO_PULL_NONE;
- break;
- case 0x02:
- pull = S3C_GPIO_PULL_DOWN;
- break;
- }
-
- return pull;
-}
-#endif
-#endif
-
-#if defined(CONFIG_S3C_GPIO_PULL_UP) || defined(CONFIG_S3C_GPIO_PULL_DOWN)
-static int s3c_gpio_setpull_1(struct s3c_gpio_chip *chip,
- unsigned int off, s3c_gpio_pull_t pull,
- s3c_gpio_pull_t updown)
-{
- void __iomem *reg = chip->base + 0x08;
- u32 pup = __raw_readl(reg);
-
- if (pull == updown)
- pup &= ~(1 << off);
- else if (pull == S3C_GPIO_PULL_NONE)
- pup |= (1 << off);
- else
- return -EINVAL;
-
- __raw_writel(pup, reg);
- return 0;
-}
-
-static s3c_gpio_pull_t s3c_gpio_getpull_1(struct s3c_gpio_chip *chip,
- unsigned int off, s3c_gpio_pull_t updown)
-{
- void __iomem *reg = chip->base + 0x08;
- u32 pup = __raw_readl(reg);
-
- pup &= (1 << off);
- return pup ? S3C_GPIO_PULL_NONE : updown;
-}
-#endif /* CONFIG_S3C_GPIO_PULL_UP || CONFIG_S3C_GPIO_PULL_DOWN */
-
-#ifdef CONFIG_S3C_GPIO_PULL_UP
-s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
- unsigned int off)
-{
- return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP);
-}
-
-int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
- unsigned int off, s3c_gpio_pull_t pull)
-{
- return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP);
-}
-#endif /* CONFIG_S3C_GPIO_PULL_UP */
-
-#ifdef CONFIG_S3C_GPIO_PULL_DOWN
-s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip,
- unsigned int off)
-{
- return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN);
-}
-
-int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip,
- unsigned int off, s3c_gpio_pull_t pull)
-{
- return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN);
-}
-#endif /* CONFIG_S3C_GPIO_PULL_DOWN */
-
-#ifdef CONFIG_S5P_GPIO_DRVSTR
-s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
-{
- struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
- unsigned int off;
- void __iomem *reg;
- int shift;
- u32 drvstr;
-
- if (!chip)
- return -EINVAL;
-
- off = pin - chip->chip.base;
- shift = off * 2;
- reg = chip->base + 0x0C;
-
- drvstr = __raw_readl(reg);
- drvstr = drvstr >> shift;
- drvstr &= 0x3;
-
- return (__force s5p_gpio_drvstr_t)drvstr;
-}
-EXPORT_SYMBOL(s5p_gpio_get_drvstr);
-
-int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr)
-{
- struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
- unsigned int off;
- void __iomem *reg;
- int shift;
- u32 tmp;
-
- if (!chip)
- return -EINVAL;
-
- off = pin - chip->chip.base;
- shift = off * 2;
- reg = chip->base + 0x0C;
-
- tmp = __raw_readl(reg);
- tmp &= ~(0x3 << shift);
- tmp |= drvstr << shift;
-
- __raw_writel(tmp, reg);
-
- return 0;
-}
-EXPORT_SYMBOL(s5p_gpio_set_drvstr);
-#endif /* CONFIG_S5P_GPIO_DRVSTR */
+++ /dev/null
-/* linux/arch/arm/plat-s3c/gpio.c
- *
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C series GPIO core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/spinlock.h>
-
-#include <plat/gpio-core.h>
-
-#ifdef CONFIG_S3C_GPIO_TRACK
-struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
-
-static __init void s3c_gpiolib_track(struct s3c_gpio_chip *chip)
-{
- unsigned int gpn;
- int i;
-
- gpn = chip->chip.base;
- for (i = 0; i < chip->chip.ngpio; i++, gpn++) {
- BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios));
- s3c_gpios[gpn] = chip;
- }
-}
-#endif /* CONFIG_S3C_GPIO_TRACK */
-
-/* Default routines for controlling GPIO, based on the original S3C24XX
- * GPIO functions which deal with the case where each gpio bank of the
- * chip is as following:
- *
- * base + 0x00: Control register, 2 bits per gpio
- * gpio n: 2 bits starting at (2*n)
- * 00 = input, 01 = output, others mean special-function
- * base + 0x04: Data register, 1 bit per gpio
- * bit n: data bit n
-*/
-
-static int s3c_gpiolib_input(struct gpio_chip *chip, unsigned offset)
-{
- struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
- void __iomem *base = ourchip->base;
- unsigned long flags;
- unsigned long con;
-
- s3c_gpio_lock(ourchip, flags);
-
- con = __raw_readl(base + 0x00);
- con &= ~(3 << (offset * 2));
-
- __raw_writel(con, base + 0x00);
-
- s3c_gpio_unlock(ourchip, flags);
- return 0;
-}
-
-static int s3c_gpiolib_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
- void __iomem *base = ourchip->base;
- unsigned long flags;
- unsigned long dat;
- unsigned long con;
-
- s3c_gpio_lock(ourchip, flags);
-
- dat = __raw_readl(base + 0x04);
- dat &= ~(1 << offset);
- if (value)
- dat |= 1 << offset;
- __raw_writel(dat, base + 0x04);
-
- con = __raw_readl(base + 0x00);
- con &= ~(3 << (offset * 2));
- con |= 1 << (offset * 2);
-
- __raw_writel(con, base + 0x00);
- __raw_writel(dat, base + 0x04);
-
- s3c_gpio_unlock(ourchip, flags);
- return 0;
-}
-
-static void s3c_gpiolib_set(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
- void __iomem *base = ourchip->base;
- unsigned long flags;
- unsigned long dat;
-
- s3c_gpio_lock(ourchip, flags);
-
- dat = __raw_readl(base + 0x04);
- dat &= ~(1 << offset);
- if (value)
- dat |= 1 << offset;
- __raw_writel(dat, base + 0x04);
-
- s3c_gpio_unlock(ourchip, flags);
-}
-
-static int s3c_gpiolib_get(struct gpio_chip *chip, unsigned offset)
-{
- struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
- unsigned long val;
-
- val = __raw_readl(ourchip->base + 0x04);
- val >>= offset;
- val &= 1;
-
- return val;
-}
-
-__init void s3c_gpiolib_add(struct s3c_gpio_chip *chip)
-{
- struct gpio_chip *gc = &chip->chip;
- int ret;
-
- BUG_ON(!chip->base);
- BUG_ON(!gc->label);
- BUG_ON(!gc->ngpio);
-
- spin_lock_init(&chip->lock);
-
- if (!gc->direction_input)
- gc->direction_input = s3c_gpiolib_input;
- if (!gc->direction_output)
- gc->direction_output = s3c_gpiolib_output;
- if (!gc->set)
- gc->set = s3c_gpiolib_set;
- if (!gc->get)
- gc->get = s3c_gpiolib_get;
-
-#ifdef CONFIG_PM
- if (chip->pm != NULL) {
- if (!chip->pm->save || !chip->pm->resume)
- printk(KERN_ERR "gpio: %s has missing PM functions\n",
- gc->label);
- } else
- printk(KERN_ERR "gpio: %s has no PM function\n", gc->label);
-#endif
-
- /* gpiochip_add() prints own failure message on error. */
- ret = gpiochip_add(gc);
- if (ret >= 0)
- s3c_gpiolib_track(chip);
-}
-
-int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
-{
- struct s3c_gpio_chip *s3c_chip = container_of(chip,
- struct s3c_gpio_chip, chip);
-
- return s3c_chip->irq_base + offset;
-}
/* re-define device name depending on support. */
static inline void s3c_adc_setname(char *name)
{
-#ifdef CONFIG_SAMSUNG_DEV_ADC
+#if defined(CONFIG_SAMSUNG_DEV_ADC) || defined(CONFIG_PLAT_S3C24XX)
s3c_device_adc.name = name;
#endif
}
--- /dev/null
+/* arch/arm/plat-samsung/include/plat/audio-simtec.h
+ *
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Simtec Audio support.
+*/
+
+/**
+ * struct s3c24xx_audio_simtec_pdata - platform data for simtec audio
+ * @use_mpllin: Select codec clock from MPLLin
+ * @output_cdclk: Need to output CDCLK to the codec
+ * @have_mic: Set if we have a MIC socket
+ * @have_lout: Set if we have a LineOut socket
+ * @amp_gpio: GPIO pin to enable the AMP
+ * @amp_gain: Option GPIO to control AMP gain
+ */
+struct s3c24xx_audio_simtec_pdata {
+ unsigned int use_mpllin:1;
+ unsigned int output_cdclk:1;
+
+ unsigned int have_mic:1;
+ unsigned int have_lout:1;
+
+ int amp_gpio;
+ int amp_gain[2];
+
+ void (*startup)(void);
+};
+
+extern int simtec_audio_add(const char *codec_name, bool has_lr_routing,
+ struct s3c24xx_audio_simtec_pdata *pdata);
--- /dev/null
+/*
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *
+ * S5P series camera interface helper functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PLAT_SAMSUNG_CAMPORT_H_
+#define __PLAT_SAMSUNG_CAMPORT_H_ __FILE__
+
+enum s5p_camport_id {
+ S5P_CAMPORT_A,
+ S5P_CAMPORT_B,
+};
+
+/*
+ * The helper functions to configure GPIO for the camera parallel bus.
+ * The camera port can be multiplexed with any FIMC entity, even multiple
+ * FIMC entities are allowed to be attached to a single port simultaneously.
+ * These functions are to be used in the board setup code.
+ */
+int s5pv210_fimc_setup_gpio(enum s5p_camport_id id);
+int exynos4_fimc_setup_gpio(enum s5p_camport_id id);
+
+#endif /* __PLAT_SAMSUNG_CAMPORT_H */
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/common-smdk.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Common code for SMDK2410 and SMDK2440 boards
+ *
+ * http://www.fluff.org/ben/smdk2440/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern void smdk_machine_init(void);
--- /dev/null
+/* arch/arm/plat-samsung/include/plat/cpu-freq-core.h
+ *
+ * Copyright (c) 2006-2009 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C CPU frequency scaling support - core support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/cpu-freq.h>
+
+struct seq_file;
+
+#define MAX_BANKS (8)
+#define S3C2412_MAX_IO (8)
+
+/**
+ * struct s3c2410_iobank_timing - IO bank timings for S3C2410 style timings
+ * @bankcon: The cached version of settings in this structure.
+ * @tacp:
+ * @tacs: Time from address valid to nCS asserted.
+ * @tcos: Time from nCS asserted to nOE or nWE asserted.
+ * @tacc: Time that nOE or nWE is asserted.
+ * @tcoh: Time nCS is held after nOE or nWE are released.
+ * @tcah: Time address is held for after
+ * @nwait_en: Whether nWAIT is enabled for this bank.
+ *
+ * This structure represents the IO timings for a S3C2410 style IO bank
+ * used by the CPU frequency support if it needs to change the settings
+ * of the IO.
+ */
+struct s3c2410_iobank_timing {
+ unsigned long bankcon;
+ unsigned int tacp;
+ unsigned int tacs;
+ unsigned int tcos;
+ unsigned int tacc;
+ unsigned int tcoh; /* nCS hold afrer nOE/nWE */
+ unsigned int tcah; /* Address hold after nCS */
+ unsigned char nwait_en; /* nWait enabled for bank. */
+};
+
+/**
+ * struct s3c2412_iobank_timing - io timings for PL092 (S3C2412) style IO
+ * @idcy: The idle cycle time between transactions.
+ * @wstrd: nCS release to end of read cycle.
+ * @wstwr: nCS release to end of write cycle.
+ * @wstoen: nCS assertion to nOE assertion time.
+ * @wstwen: nCS assertion to nWE assertion time.
+ * @wstbrd: Burst ready delay.
+ * @smbidcyr: Register cache for smbidcyr value.
+ * @smbwstrd: Register cache for smbwstrd value.
+ * @smbwstwr: Register cache for smbwstwr value.
+ * @smbwstoen: Register cache for smbwstoen value.
+ * @smbwstwen: Register cache for smbwstwen value.
+ * @smbwstbrd: Register cache for smbwstbrd value.
+ *
+ * Timing information for a IO bank on an S3C2412 or similar system which
+ * uses a PL093 block.
+ */
+struct s3c2412_iobank_timing {
+ unsigned int idcy;
+ unsigned int wstrd;
+ unsigned int wstwr;
+ unsigned int wstoen;
+ unsigned int wstwen;
+ unsigned int wstbrd;
+
+ /* register cache */
+ unsigned char smbidcyr;
+ unsigned char smbwstrd;
+ unsigned char smbwstwr;
+ unsigned char smbwstoen;
+ unsigned char smbwstwen;
+ unsigned char smbwstbrd;
+};
+
+union s3c_iobank {
+ struct s3c2410_iobank_timing *io_2410;
+ struct s3c2412_iobank_timing *io_2412;
+};
+
+/**
+ * struct s3c_iotimings - Chip IO timings holder
+ * @bank: The timings for each IO bank.
+ */
+struct s3c_iotimings {
+ union s3c_iobank bank[MAX_BANKS];
+};
+
+/**
+ * struct s3c_plltab - PLL table information.
+ * @vals: List of PLL values.
+ * @size: Size of the PLL table @vals.
+ */
+struct s3c_plltab {
+ struct s3c_pllval *vals;
+ int size;
+};
+
+/**
+ * struct s3c_cpufreq_config - current cpu frequency configuration
+ * @freq: The current settings for the core clocks.
+ * @max: Maxium settings, derived from core, board and user settings.
+ * @pll: The PLL table entry for the current PLL settings.
+ * @divs: The divisor settings for the core clocks.
+ * @info: The current core driver information.
+ * @board: The information for the board we are running on.
+ * @lock_pll: Set if the PLL settings cannot be changed.
+ *
+ * This is for the core drivers that need to know information about
+ * the current settings and values. It should not be needed by any
+ * device drivers.
+*/
+struct s3c_cpufreq_config {
+ struct s3c_freq freq;
+ struct s3c_freq max;
+ struct cpufreq_frequency_table pll;
+ struct s3c_clkdivs divs;
+ struct s3c_cpufreq_info *info; /* for core, not drivers */
+ struct s3c_cpufreq_board *board;
+
+ unsigned int lock_pll:1;
+};
+
+/**
+ * struct s3c_cpufreq_info - Information for the CPU frequency driver.
+ * @name: The name of this implementation.
+ * @max: The maximum frequencies for the system.
+ * @latency: Transition latency to give to cpufreq.
+ * @locktime_m: The lock-time in uS for the MPLL.
+ * @locktime_u: The lock-time in uS for the UPLL.
+ * @locttime_bits: The number of bits each LOCKTIME field.
+ * @need_pll: Set if this driver needs to change the PLL values to achieve
+ * any frequency changes. This is really only need by devices like the
+ * S3C2410 where there is no or limited divider between the PLL and the
+ * ARMCLK.
+ * @resume_clocks: Update the clocks on resume.
+ * @get_iotiming: Get the current IO timing data, mainly for use at start.
+ * @set_iotiming: Update the IO timings from the cached copies calculated
+ * from the @calc_iotiming entry when changing the frequency.
+ * @calc_iotiming: Calculate and update the cached copies of the IO timings
+ * from the newly calculated frequencies.
+ * @calc_freqtable: Calculate (fill in) the given frequency table from the
+ * current frequency configuration. If the table passed in is NULL,
+ * then the return is the number of elements to be filled for allocation
+ * of the table.
+ * @set_refresh: Set the memory refresh configuration.
+ * @set_fvco: Set the PLL frequencies.
+ * @set_divs: Update the clock divisors.
+ * @calc_divs: Calculate the clock divisors.
+ */
+struct s3c_cpufreq_info {
+ const char *name;
+ struct s3c_freq max;
+
+ unsigned int latency;
+
+ unsigned int locktime_m;
+ unsigned int locktime_u;
+ unsigned char locktime_bits;
+
+ unsigned int need_pll:1;
+
+ /* driver routines */
+
+ void (*resume_clocks)(void);
+
+ int (*get_iotiming)(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings);
+
+ void (*set_iotiming)(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings);
+
+ int (*calc_iotiming)(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings);
+
+ int (*calc_freqtable)(struct s3c_cpufreq_config *cfg,
+ struct cpufreq_frequency_table *t,
+ size_t table_size);
+
+ void (*debug_io_show)(struct seq_file *seq,
+ struct s3c_cpufreq_config *cfg,
+ union s3c_iobank *iob);
+
+ void (*set_refresh)(struct s3c_cpufreq_config *cfg);
+ void (*set_fvco)(struct s3c_cpufreq_config *cfg);
+ void (*set_divs)(struct s3c_cpufreq_config *cfg);
+ int (*calc_divs)(struct s3c_cpufreq_config *cfg);
+};
+
+extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info);
+
+extern int s3c_plltab_register(struct cpufreq_frequency_table *plls,
+ unsigned int plls_no);
+
+/* exports and utilities for debugfs */
+extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void);
+extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void);
+
+extern void s3c2410_iotiming_debugfs(struct seq_file *seq,
+ struct s3c_cpufreq_config *cfg,
+ union s3c_iobank *iob);
+
+extern void s3c2412_iotiming_debugfs(struct seq_file *seq,
+ struct s3c_cpufreq_config *cfg,
+ union s3c_iobank *iob);
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
+#define s3c_cpufreq_debugfs_call(x) x
+#else
+#define s3c_cpufreq_debugfs_call(x) NULL
+#endif
+
+/* Useful utility functions. */
+
+extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *);
+
+/* S3C2410 and compatible exported functions */
+
+extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg);
+extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
+
+#ifdef CONFIG_S3C2410_IOTIMING
+extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot);
+
+extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings);
+
+extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot);
+#else
+#define s3c2410_iotiming_calc NULL
+#define s3c2410_iotiming_get NULL
+#define s3c2410_iotiming_set NULL
+#endif /* CONFIG_S3C2410_IOTIMING */
+
+/* S3C2412 compatible routines */
+
+extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings);
+
+extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings);
+
+extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot);
+
+extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot);
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
+#define s3c_freq_dbg(x...) printk(KERN_INFO x)
+#else
+#define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0)
+#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUG */
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_IODEBUG
+#define s3c_freq_iodbg(x...) printk(KERN_INFO x)
+#else
+#define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0)
+#endif /* CONFIG_CPU_FREQ_S3C24XX_IODEBUG */
+
+static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table,
+ int index, size_t table_size,
+ unsigned int freq)
+{
+ if (index < 0)
+ return index;
+
+ if (table) {
+ if (index >= table_size)
+ return -ENOMEM;
+
+ s3c_freq_dbg("%s: { %d = %u kHz }\n",
+ __func__, index, freq);
+
+ table[index].index = index;
+ table[index].frequency = freq;
+ }
+
+ return index + 1;
+}
#define S3C6400_CPU_ID 0x36400000
#define S3C6410_CPU_ID 0x36410000
-#define S3C64XX_CPU_ID (S3C6400_CPU_ID & S3C6410_CPU_ID)
#define S3C64XX_CPU_MASK 0xFFFFF000
#define S5P6440_CPU_ID 0x56440000
}
IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK)
-IS_SAMSUNG_CPU(s3c64xx, S3C64XX_CPU_ID, S3C64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s3c6400, S3C6400_CPU_ID, S3C64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s3c6410, S3C6410_CPU_ID, S3C64XX_CPU_MASK)
IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK)
IS_SAMSUNG_CPU(s5p6450, S5P6450_CPU_ID, S5P64XX_CPU_MASK)
IS_SAMSUNG_CPU(s5pc100, S5PC100_CPU_ID, S5PC100_CPU_MASK)
#endif
#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
-# define soc_is_s3c64xx() is_samsung_s3c64xx()
+# define soc_is_s3c64xx() (is_samsung_s3c6400() || is_samsung_s3c6410())
#else
# define soc_is_s3c64xx() 0
#endif
extern struct platform_device *s3c24xx_uart_devs[];
extern struct platform_device *s3c24xx_uart_src[];
-extern struct platform_device s3c_device_timer[];
-
+extern struct platform_device s3c64xx_device_ac97;
extern struct platform_device s3c64xx_device_iis0;
extern struct platform_device s3c64xx_device_iis1;
extern struct platform_device s3c64xx_device_iisv4;
-
-extern struct platform_device s3c64xx_device_spi0;
-extern struct platform_device s3c64xx_device_spi1;
-
-extern struct platform_device samsung_asoc_dma;
-extern struct platform_device samsung_asoc_idma;
-
+extern struct platform_device s3c64xx_device_onenand1;
extern struct platform_device s3c64xx_device_pcm0;
extern struct platform_device s3c64xx_device_pcm1;
+extern struct platform_device s3c64xx_device_spi0;
+extern struct platform_device s3c64xx_device_spi1;
-extern struct platform_device s3c64xx_device_ac97;
-
-extern struct platform_device s3c_device_ts;
-
+extern struct platform_device s3c_device_adc;
+extern struct platform_device s3c_device_cfcon;
extern struct platform_device s3c_device_fb;
-extern struct platform_device s5p_device_fimd0;
-extern struct platform_device s3c_device_ohci;
-extern struct platform_device s3c_device_lcd;
-extern struct platform_device s3c_device_wdt;
+extern struct platform_device s3c_device_hwmon;
+extern struct platform_device s3c_device_hsmmc0;
+extern struct platform_device s3c_device_hsmmc1;
+extern struct platform_device s3c_device_hsmmc2;
+extern struct platform_device s3c_device_hsmmc3;
extern struct platform_device s3c_device_i2c0;
extern struct platform_device s3c_device_i2c1;
extern struct platform_device s3c_device_i2c2;
extern struct platform_device s3c_device_i2c5;
extern struct platform_device s3c_device_i2c6;
extern struct platform_device s3c_device_i2c7;
+extern struct platform_device s3c_device_iis;
+extern struct platform_device s3c_device_lcd;
+extern struct platform_device s3c_device_nand;
+extern struct platform_device s3c_device_ohci;
+extern struct platform_device s3c_device_onenand;
extern struct platform_device s3c_device_rtc;
-extern struct platform_device s3c_device_adc;
extern struct platform_device s3c_device_sdi;
-extern struct platform_device s3c_device_iis;
-extern struct platform_device s3c_device_hwmon;
-extern struct platform_device s3c_device_hsmmc0;
-extern struct platform_device s3c_device_hsmmc1;
-extern struct platform_device s3c_device_hsmmc2;
-extern struct platform_device s3c_device_hsmmc3;
-extern struct platform_device s3c_device_cfcon;
-
extern struct platform_device s3c_device_spi0;
extern struct platform_device s3c_device_spi1;
-
-extern struct platform_device s5pc100_device_spi0;
-extern struct platform_device s5pc100_device_spi1;
-extern struct platform_device s5pc100_device_spi2;
-extern struct platform_device s5pv210_device_spi0;
-extern struct platform_device s5pv210_device_spi1;
-extern struct platform_device s5p64x0_device_spi0;
-extern struct platform_device s5p64x0_device_spi1;
-
-extern struct platform_device s3c_device_hwmon;
-
-extern struct platform_device s3c_device_nand;
-extern struct platform_device s3c_device_onenand;
-extern struct platform_device s3c64xx_device_onenand1;
-extern struct platform_device s5p_device_onenand;
-
+extern struct platform_device s3c_device_ts;
+extern struct platform_device s3c_device_timer[];
extern struct platform_device s3c_device_usbgadget;
-extern struct platform_device s3c_device_usb_hsudc;
extern struct platform_device s3c_device_usb_hsotg;
+extern struct platform_device s3c_device_usb_hsudc;
+extern struct platform_device s3c_device_wdt;
-extern struct platform_device s5pv210_device_ac97;
-extern struct platform_device s5pv210_device_pcm0;
-extern struct platform_device s5pv210_device_pcm1;
-extern struct platform_device s5pv210_device_pcm2;
-extern struct platform_device s5pv210_device_iis0;
-extern struct platform_device s5pv210_device_iis1;
-extern struct platform_device s5pv210_device_iis2;
-extern struct platform_device s5pv210_device_spdif;
-
-extern struct platform_device exynos4_device_ac97;
-extern struct platform_device exynos4_device_pcm0;
-extern struct platform_device exynos4_device_pcm1;
-extern struct platform_device exynos4_device_pcm2;
-extern struct platform_device exynos4_device_i2s0;
-extern struct platform_device exynos4_device_i2s1;
-extern struct platform_device exynos4_device_i2s2;
-extern struct platform_device exynos4_device_spdif;
-extern struct platform_device exynos4_device_pd[];
-extern struct platform_device exynos4_device_ahci;
-extern struct platform_device exynos4_device_dwmci;
+extern struct platform_device s5p_device_ehci;
+extern struct platform_device s5p_device_fimc0;
+extern struct platform_device s5p_device_fimc1;
+extern struct platform_device s5p_device_fimc2;
+extern struct platform_device s5p_device_fimc3;
+extern struct platform_device s5p_device_fimc_md;
+extern struct platform_device s5p_device_fimd0;
+extern struct platform_device s5p_device_hdmi;
+extern struct platform_device s5p_device_i2c_hdmiphy;
+extern struct platform_device s5p_device_mfc;
+extern struct platform_device s5p_device_mfc_l;
+extern struct platform_device s5p_device_mfc_r;
+extern struct platform_device s5p_device_mipi_csis0;
+extern struct platform_device s5p_device_mipi_csis1;
+extern struct platform_device s5p_device_mixer;
+extern struct platform_device s5p_device_onenand;
+extern struct platform_device s5p_device_sdo;
-extern struct platform_device s5p6440_device_pcm;
extern struct platform_device s5p6440_device_iis;
+extern struct platform_device s5p6440_device_pcm;
extern struct platform_device s5p6450_device_iis0;
extern struct platform_device s5p6450_device_iis1;
extern struct platform_device s5p6450_device_iis2;
extern struct platform_device s5p6450_device_pcm0;
+extern struct platform_device s5p64x0_device_spi0;
+extern struct platform_device s5p64x0_device_spi1;
+
extern struct platform_device s5pc100_device_ac97;
-extern struct platform_device s5pc100_device_pcm0;
-extern struct platform_device s5pc100_device_pcm1;
extern struct platform_device s5pc100_device_iis0;
extern struct platform_device s5pc100_device_iis1;
extern struct platform_device s5pc100_device_iis2;
+extern struct platform_device s5pc100_device_pcm0;
+extern struct platform_device s5pc100_device_pcm1;
extern struct platform_device s5pc100_device_spdif;
+extern struct platform_device s5pc100_device_spi0;
+extern struct platform_device s5pc100_device_spi1;
+extern struct platform_device s5pc100_device_spi2;
-extern struct platform_device samsung_device_keypad;
-
-extern struct platform_device s5p_device_fimc0;
-extern struct platform_device s5p_device_fimc1;
-extern struct platform_device s5p_device_fimc2;
-extern struct platform_device s5p_device_fimc3;
-
-extern struct platform_device s5p_device_mfc;
-extern struct platform_device s5p_device_mfc_l;
-extern struct platform_device s5p_device_mfc_r;
-extern struct platform_device s5p_device_mipi_csis0;
-extern struct platform_device s5p_device_mipi_csis1;
-
-extern struct platform_device s5p_device_ehci;
+extern struct platform_device s5pv210_device_ac97;
+extern struct platform_device s5pv210_device_iis0;
+extern struct platform_device s5pv210_device_iis1;
+extern struct platform_device s5pv210_device_iis2;
+extern struct platform_device s5pv210_device_pcm0;
+extern struct platform_device s5pv210_device_pcm1;
+extern struct platform_device s5pv210_device_pcm2;
+extern struct platform_device s5pv210_device_spdif;
+extern struct platform_device s5pv210_device_spi0;
+extern struct platform_device s5pv210_device_spi1;
+extern struct platform_device exynos4_device_ac97;
+extern struct platform_device exynos4_device_ahci;
+extern struct platform_device exynos4_device_dwmci;
+extern struct platform_device exynos4_device_i2s0;
+extern struct platform_device exynos4_device_i2s1;
+extern struct platform_device exynos4_device_i2s2;
+extern struct platform_device exynos4_device_pcm0;
+extern struct platform_device exynos4_device_pcm1;
+extern struct platform_device exynos4_device_pcm2;
+extern struct platform_device exynos4_device_pd[];
+extern struct platform_device exynos4_device_spdif;
extern struct platform_device exynos4_device_sysmmu;
+extern struct platform_device samsung_asoc_dma;
+extern struct platform_device samsung_asoc_idma;
+extern struct platform_device samsung_device_keypad;
+
/* s3c2440 specific devices */
#ifdef CONFIG_CPU_S3C2440
--- /dev/null
+/*
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PLAT_SAMSUNG_EHCI_H
+#define __PLAT_SAMSUNG_EHCI_H __FILE__
+
+struct s5p_ehci_platdata {
+ int (*phy_init)(struct platform_device *pdev, int type);
+ int (*phy_exit)(struct platform_device *pdev, int type);
+};
+
+extern void s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd);
+
+#endif /* __PLAT_SAMSUNG_EHCI_H */
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/exynos4.h
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Header file for exynos4 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for EXYNOS4 related SoCs */
+
+extern void exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void exynos4_register_clocks(void);
+extern void exynos4210_register_clocks(void);
+extern void exynos4212_register_clocks(void);
+extern void exynos4_setup_clocks(void);
+
+#ifdef CONFIG_ARCH_EXYNOS
+extern int exynos_init(void);
+extern void exynos4_init_irq(void);
+extern void exynos4_map_io(void);
+extern void exynos4_init_clocks(int xtal);
+extern struct sys_timer exynos4_timer;
+
+#define exynos4_init_uarts exynos4_common_init_uarts
+
+#else
+#define exynos4_init_clocks NULL
+#define exynos4_init_uarts NULL
+#define exynos4_map_io NULL
+#define exynos_init NULL
+#endif
--- /dev/null
+/* arch/arm/plat-samsung/include/plat/fb-s3c2410.h
+ *
+ * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ * Inspired by pxafb.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_FB_S3C2410_H
+#define __ASM_PLAT_FB_S3C2410_H __FILE__
+
+struct s3c2410fb_hw {
+ unsigned long lcdcon1;
+ unsigned long lcdcon2;
+ unsigned long lcdcon3;
+ unsigned long lcdcon4;
+ unsigned long lcdcon5;
+};
+
+/* LCD description */
+struct s3c2410fb_display {
+ /* LCD type */
+ unsigned type;
+
+ /* Screen size */
+ unsigned short width;
+ unsigned short height;
+
+ /* Screen info */
+ unsigned short xres;
+ unsigned short yres;
+ unsigned short bpp;
+
+ unsigned pixclock; /* pixclock in picoseconds */
+ unsigned short left_margin; /* value in pixels (TFT) or HCLKs (STN) */
+ unsigned short right_margin; /* value in pixels (TFT) or HCLKs (STN) */
+ unsigned short hsync_len; /* value in pixels (TFT) or HCLKs (STN) */
+ unsigned short upper_margin; /* value in lines (TFT) or 0 (STN) */
+ unsigned short lower_margin; /* value in lines (TFT) or 0 (STN) */
+ unsigned short vsync_len; /* value in lines (TFT) or 0 (STN) */
+
+ /* lcd configuration registers */
+ unsigned long lcdcon5;
+};
+
+struct s3c2410fb_mach_info {
+
+ struct s3c2410fb_display *displays; /* attached diplays info */
+ unsigned num_displays; /* number of defined displays */
+ unsigned default_display;
+
+ /* GPIOs */
+
+ unsigned long gpcup;
+ unsigned long gpcup_mask;
+ unsigned long gpccon;
+ unsigned long gpccon_mask;
+ unsigned long gpdup;
+ unsigned long gpdup_mask;
+ unsigned long gpdcon;
+ unsigned long gpdcon_mask;
+
+ /* lpc3600 control register */
+ unsigned long lpcsel;
+};
+
+extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *);
+
+#endif /* __ASM_PLAT_FB_S3C2410_H */
*/
extern void exynos4_fimd0_gpio_setup_24bpp(void);
+/**
+ * s5p64x0_fb_gpio_setup_24bpp() - S5P6440/S5P6450 setup function for 24bpp LCD
+ *
+ * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
+ */
+extern void s5p64x0_fb_gpio_setup_24bpp(void);
+
#endif /* __PLAT_S3C_FB_H */
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/fiq.h
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C24XX CPU FIQ support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern int s3c24xx_set_fiq(unsigned int irq, bool on);
-/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg-helper.h
+/* linux/arch/arm/plat-samsung/include/plat/gpio-cfg-helper.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
- * S3C Platform - GPIO pin configuration helper definitions
+ * Samsung Platform - GPIO pin configuration helper definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* by disabling interrupts.
*/
-static inline int s3c_gpio_do_setcfg(struct s3c_gpio_chip *chip,
- unsigned int off, unsigned int config)
+static inline int samsung_gpio_do_setcfg(struct samsung_gpio_chip *chip,
+ unsigned int off, unsigned int config)
{
return (chip->config->set_config)(chip, off, config);
}
-static inline unsigned s3c_gpio_do_getcfg(struct s3c_gpio_chip *chip,
- unsigned int off)
+static inline unsigned samsung_gpio_do_getcfg(struct samsung_gpio_chip *chip,
+ unsigned int off)
{
return (chip->config->get_config)(chip, off);
}
-static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip,
- unsigned int off, s3c_gpio_pull_t pull)
+static inline int samsung_gpio_do_setpull(struct samsung_gpio_chip *chip,
+ unsigned int off, samsung_gpio_pull_t pull)
{
return (chip->config->set_pull)(chip, off, pull);
}
-static inline s3c_gpio_pull_t s3c_gpio_do_getpull(struct s3c_gpio_chip *chip,
- unsigned int off)
+static inline samsung_gpio_pull_t samsung_gpio_do_getpull(struct samsung_gpio_chip *chip,
+ unsigned int off)
{
return chip->config->get_pull(chip, off);
}
-/**
- * s3c_gpio_setcfg_s3c24xx - S3C24XX style GPIO configuration.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @cfg: The configuration value to set.
- *
- * This helper deal with the GPIO cases where the control register
- * has two bits of configuration per gpio, which have the following
- * functions:
- * 00 = input
- * 01 = output
- * 1x = special function
-*/
-extern int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip,
- unsigned int off, unsigned int cfg);
-
-/**
- * s3c_gpio_getcfg_s3c24xx - S3C24XX style GPIO configuration read.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- *
- * The reverse of s3c_gpio_setcfg_s3c24xx(). Will return a value whicg
- * could be directly passed back to s3c_gpio_setcfg_s3c24xx(), from the
- * S3C_GPIO_SPECIAL() macro.
- */
-unsigned int s3c_gpio_getcfg_s3c24xx(struct s3c_gpio_chip *chip,
- unsigned int off);
-
-/**
- * s3c_gpio_setcfg_s3c24xx_a - S3C24XX style GPIO configuration (Bank A)
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @cfg: The configuration value to set.
- *
- * This helper deal with the GPIO cases where the control register
- * has one bit of configuration for the gpio, where setting the bit
- * means the pin is in special function mode and unset means output.
-*/
-extern int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
- unsigned int off, unsigned int cfg);
-
-
-/**
- * s3c_gpio_getcfg_s3c24xx_a - S3C24XX style GPIO configuration read (Bank A)
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- *
- * The reverse of s3c_gpio_setcfg_s3c24xx_a() turning an GPIO into a usable
- * GPIO configuration value.
- *
- * @sa s3c_gpio_getcfg_s3c24xx
- * @sa s3c_gpio_getcfg_s3c64xx_4bit
- */
-extern unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
- unsigned int off);
-
-/**
- * s3c_gpio_setcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @cfg: The configuration value to set.
- *
- * This helper deal with the GPIO cases where the control register has 4 bits
- * of control per GPIO, generally in the form of:
- * 0000 = Input
- * 0001 = Output
- * others = Special functions (dependent on bank)
- *
- * Note, since the code to deal with the case where there are two control
- * registers instead of one, we do not have a separate set of functions for
- * each case.
-*/
-extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
- unsigned int off, unsigned int cfg);
-
-
-/**
- * s3c_gpio_getcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config read.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- *
- * The reverse of s3c_gpio_setcfg_s3c64xx_4bit(), turning a gpio configuration
- * register setting into a value the software can use, such as could be passed
- * to s3c_gpio_setcfg_s3c64xx_4bit().
- *
- * @sa s3c_gpio_getcfg_s3c24xx
- */
-extern unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
- unsigned int off);
-
/* Pull-{up,down} resistor controls.
*
* S3C2410,S3C2440 = Pull-UP,
*/
/**
- * s3c_gpio_setpull_1up() - Pull configuration for choice of up or none.
+ * s3c24xx_gpio_setpull_1up() - Pull configuration for choice of up or none.
* @chip: The gpio chip that is being configured.
* @off: The offset for the GPIO being configured.
* @param: pull: The pull mode being requested.
* This is a helper function for the case where we have GPIOs with one
* bit configuring the presence of a pull-up resistor.
*/
-extern int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
- unsigned int off, s3c_gpio_pull_t pull);
+extern int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip,
+ unsigned int off, samsung_gpio_pull_t pull);
/**
- * s3c_gpio_setpull_1down() - Pull configuration for choice of down or none
+ * s3c24xx_gpio_setpull_1down() - Pull configuration for choice of down or none
* @chip: The gpio chip that is being configured
* @off: The offset for the GPIO being configured
* @param: pull: The pull mode being requested
* This is a helper function for the case where we have GPIOs with one
* bit configuring the presence of a pull-down resistor.
*/
-extern int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip,
- unsigned int off, s3c_gpio_pull_t pull);
+extern int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip,
+ unsigned int off, samsung_gpio_pull_t pull);
/**
- * s3c_gpio_setpull_upown() - Pull configuration for choice of up, down or none
+ * samsung_gpio_setpull_upown() - Pull configuration for choice of up,
+ * down or none
+ *
* @chip: The gpio chip that is being configured.
* @off: The offset for the GPIO being configured.
* @param: pull: The pull mode being requested.
* 01 = Pull-up resistor connected
* 10 = Pull-down resistor connected
*/
-extern int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip,
- unsigned int off, s3c_gpio_pull_t pull);
-
+extern int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
+ unsigned int off, samsung_gpio_pull_t pull);
/**
- * s3c_gpio_getpull_updown() - Get configuration for choice of up, down or none
+ * samsung_gpio_getpull_updown() - Get configuration for choice of up,
+ * down or none
+ *
* @chip: The gpio chip that the GPIO pin belongs to
* @off: The offset to the pin to get the configuration of.
*
- * This helper function reads the state of the pull-{up,down} resistor for the
- * given GPIO in the same case as s3c_gpio_setpull_upown.
+ * This helper function reads the state of the pull-{up,down} resistor
+ * for the given GPIO in the same case as samsung_gpio_setpull_upown.
*/
-extern s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
- unsigned int off);
+extern samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
+ unsigned int off);
/**
- * s3c_gpio_getpull_1up() - Get configuration for choice of up or none
+ * s3c24xx_gpio_getpull_1up() - Get configuration for choice of up or none
* @chip: The gpio chip that the GPIO pin belongs to
* @off: The offset to the pin to get the configuration of.
*
* This helper function reads the state of the pull-up resistor for the
- * given GPIO in the same case as s3c_gpio_setpull_1up.
+ * given GPIO in the same case as s3c24xx_gpio_setpull_1up.
*/
-extern s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
- unsigned int off);
+extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip,
+ unsigned int off);
/**
- * s3c_gpio_getpull_1down() - Get configuration for choice of down or none
+ * s3c24xx_gpio_getpull_1down() - Get configuration for choice of down or none
* @chip: The gpio chip that the GPIO pin belongs to
* @off: The offset to the pin to get the configuration of.
*
* This helper function reads the state of the pull-down resistor for the
- * given GPIO in the same case as s3c_gpio_setpull_1down.
+ * given GPIO in the same case as s3c24xx_gpio_setpull_1down.
*/
-extern s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip,
- unsigned int off);
+extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip,
+ unsigned int off);
/**
- * s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443.
+ * s3c2443_gpio_setpull() - Pull configuration for s3c2443.
* @chip: The gpio chip that is being configured.
* @off: The offset for the GPIO being configured.
* @param: pull: The pull mode being requested.
* 10 = Pull-down resistor connected
* x1 = No pull up resistor
*/
-extern int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip,
- unsigned int off, s3c_gpio_pull_t pull);
+extern int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip,
+ unsigned int off, samsung_gpio_pull_t pull);
/**
- * s3c_gpio_getpull_s3c2443() - Get configuration for s3c2443 pull resistors
+ * s3c2443_gpio_getpull() - Get configuration for s3c2443 pull resistors
* @chip: The gpio chip that the GPIO pin belongs to.
* @off: The offset to the pin to get the configuration of.
*
* This helper function reads the state of the pull-{up,down} resistor for the
- * given GPIO in the same case as s3c_gpio_setpull_upown.
+ * given GPIO in the same case as samsung_gpio_setpull_upown.
*/
-extern s3c_gpio_pull_t s3c_gpio_getpull_s3c2443(struct s3c_gpio_chip *chip,
+extern samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip,
unsigned int off);
#endif /* __PLAT_GPIO_CFG_HELPERS_H */
-
#ifndef __PLAT_GPIO_CFG_H
#define __PLAT_GPIO_CFG_H __FILE__
-typedef unsigned int __bitwise__ s3c_gpio_pull_t;
+typedef unsigned int __bitwise__ samsung_gpio_pull_t;
typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
/* forward declaration if gpio-core.h hasn't been included */
-struct s3c_gpio_chip;
+struct samsung_gpio_chip;
/**
- * struct s3c_gpio_cfg GPIO configuration
+ * struct samsung_gpio_cfg GPIO configuration
* @cfg_eint: Configuration setting when used for external interrupt source
* @get_pull: Read the current pull configuration for the GPIO
* @set_pull: Set the current pull configuraiton for the GPIO
* per-bank configuration information that other systems such as the
* external interrupt code will need.
*
- * @sa s3c_gpio_cfgpin
+ * @sa samsung_gpio_cfgpin
* @sa s3c_gpio_getcfg
* @sa s3c_gpio_setpull
* @sa s3c_gpio_getpull
*/
-struct s3c_gpio_cfg {
+struct samsung_gpio_cfg {
unsigned int cfg_eint;
- s3c_gpio_pull_t (*get_pull)(struct s3c_gpio_chip *chip, unsigned offs);
- int (*set_pull)(struct s3c_gpio_chip *chip, unsigned offs,
- s3c_gpio_pull_t pull);
+ samsung_gpio_pull_t (*get_pull)(struct samsung_gpio_chip *chip, unsigned offs);
+ int (*set_pull)(struct samsung_gpio_chip *chip, unsigned offs,
+ samsung_gpio_pull_t pull);
- unsigned (*get_config)(struct s3c_gpio_chip *chip, unsigned offs);
- int (*set_config)(struct s3c_gpio_chip *chip, unsigned offs,
+ unsigned (*get_config)(struct samsung_gpio_chip *chip, unsigned offs);
+ int (*set_config)(struct samsung_gpio_chip *chip, unsigned offs,
unsigned config);
};
#define S3C_GPIO_OUTPUT (S3C_GPIO_SPECIAL(1))
#define S3C_GPIO_SFN(x) (S3C_GPIO_SPECIAL(x))
-#define s3c_gpio_is_cfg_special(_cfg) \
+#define samsung_gpio_is_cfg_special(_cfg) \
(((_cfg) & S3C_GPIO_SPECIAL_MARK) == S3C_GPIO_SPECIAL_MARK)
/**
* up or down settings, and it may be dependent on the chip that is being
* used to whether the particular mode is available.
*/
-#define S3C_GPIO_PULL_NONE ((__force s3c_gpio_pull_t)0x00)
-#define S3C_GPIO_PULL_DOWN ((__force s3c_gpio_pull_t)0x01)
-#define S3C_GPIO_PULL_UP ((__force s3c_gpio_pull_t)0x02)
+#define S3C_GPIO_PULL_NONE ((__force samsung_gpio_pull_t)0x00)
+#define S3C_GPIO_PULL_DOWN ((__force samsung_gpio_pull_t)0x01)
+#define S3C_GPIO_PULL_UP ((__force samsung_gpio_pull_t)0x02)
/**
* s3c_gpio_setpull() - set the state of a gpio pin pull resistor
*
* @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP.
*/
-extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull);
+extern int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull);
/**
* s3c_gpio_getpull() - get the pull resistor state of a gpio pin
*
* Read the pull resistor value for the specified pin.
*/
-extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
+extern samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
/* configure `all` aspects of an gpio */
* @sa s3c_gpio_cfgpin_range
*/
extern int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
- unsigned int cfg, s3c_gpio_pull_t pull);
+ unsigned int cfg, samsung_gpio_pull_t pull);
static inline int s3c_gpio_cfgrange_nopull(unsigned int pin, unsigned int size,
unsigned int cfg)
* specific code.
*/
-struct s3c_gpio_chip;
+struct samsung_gpio_chip;
/**
- * struct s3c_gpio_pm - power management (suspend/resume) information
+ * struct samsung_gpio_pm - power management (suspend/resume) information
* @save: Routine to save the state of the GPIO block
* @resume: Routine to resume the GPIO block.
*/
-struct s3c_gpio_pm {
- void (*save)(struct s3c_gpio_chip *chip);
- void (*resume)(struct s3c_gpio_chip *chip);
+struct samsung_gpio_pm {
+ void (*save)(struct samsung_gpio_chip *chip);
+ void (*resume)(struct samsung_gpio_chip *chip);
};
-struct s3c_gpio_cfg;
+struct samsung_gpio_cfg;
/**
- * struct s3c_gpio_chip - wrapper for specific implementation of gpio
+ * struct samsung_gpio_chip - wrapper for specific implementation of gpio
* @chip: The chip structure to be exported via gpiolib.
* @base: The base pointer to the gpio configuration registers.
* @group: The group register number for gpio interrupt support.
* CPU cores trying to get one lock for different GPIO banks, where each
* bank of GPIO has its own register space and configuration registers.
*/
-struct s3c_gpio_chip {
+struct samsung_gpio_chip {
struct gpio_chip chip;
- struct s3c_gpio_cfg *config;
- struct s3c_gpio_pm *pm;
+ struct samsung_gpio_cfg *config;
+ struct samsung_gpio_pm *pm;
void __iomem *base;
int irq_base;
int group;
#endif
};
-static inline struct s3c_gpio_chip *to_s3c_gpio(struct gpio_chip *gpc)
+static inline struct samsung_gpio_chip *to_samsung_gpio(struct gpio_chip *gpc)
{
- return container_of(gpc, struct s3c_gpio_chip, chip);
+ return container_of(gpc, struct samsung_gpio_chip, chip);
}
-/** s3c_gpiolib_add() - add the s3c specific version of a gpio_chip.
- * @chip: The chip to register
- *
- * This is a wrapper to gpiochip_add() that takes our specific gpio chip
- * information and makes the necessary alterations for the platform and
- * notes the information for use with the configuration systems and any
- * other parts of the system.
- */
-extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip);
-
-/* CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios
- * for use with the configuration calls, and other parts of the s3c gpiolib
- * support code.
- *
- * Not all s3c support code will need this, as some configurations of cpu
- * may only support one or two different configuration options and have an
- * easy gpio to s3c_gpio_chip mapping function. If this is the case, then
- * the machine support file should provide its own s3c_gpiolib_getchip()
- * and any other necessary functions.
- */
-
-/**
- * samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config.
- * @chip: The gpio chip that is being configured.
- * @nr_chips: The no of chips (gpio ports) for the GPIO being configured.
- *
- * This helper deal with the GPIO cases where the control register has 4 bits
- * of control per GPIO, generally in the form of:
- * 0000 = Input
- * 0001 = Output
- * others = Special functions (dependent on bank)
- *
- * Note, since the code to deal with the case where there are two control
- * registers instead of one, we do not have a separate set of function
- * (samsung_gpiolib_add_4bit2_chips)for each case.
- */
-extern void samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip,
- int nr_chips);
-extern void samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip,
- int nr_chips);
-extern void samsung_gpiolib_add_2bit_chips(struct s3c_gpio_chip *chip,
- int nr_chips);
-
-extern void samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip);
-extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip);
-
-
/**
* samsung_gpiolib_to_irq - convert gpio pin to irq number
* @chip: The gpio chip that the pin belongs to.
extern int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset);
/* exported for core SoC support to change */
-extern struct s3c_gpio_cfg s3c24xx_gpiocfg_default;
+extern struct samsung_gpio_cfg s3c24xx_gpiocfg_default;
#ifdef CONFIG_S3C_GPIO_TRACK
-extern struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
+extern struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END];
-static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int chip)
+static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int chip)
{
return (chip < S3C_GPIO_END) ? s3c_gpios[chip] : NULL;
}
#else
-/* machine specific code should provide s3c_gpiolib_getchip */
+/* machine specific code should provide samsung_gpiolib_getchip */
#include <mach/gpio-track.h>
-static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { }
+static inline void s3c_gpiolib_track(struct samsung_gpio_chip *chip) { }
#endif
#ifdef CONFIG_PM
-extern struct s3c_gpio_pm s3c_gpio_pm_1bit;
-extern struct s3c_gpio_pm s3c_gpio_pm_2bit;
-extern struct s3c_gpio_pm s3c_gpio_pm_4bit;
+extern struct samsung_gpio_pm samsung_gpio_pm_1bit;
+extern struct samsung_gpio_pm samsung_gpio_pm_2bit;
+extern struct samsung_gpio_pm samsung_gpio_pm_4bit;
#define __gpio_pm(x) x
#else
-#define s3c_gpio_pm_1bit NULL
-#define s3c_gpio_pm_2bit NULL
-#define s3c_gpio_pm_4bit NULL
+#define samsung_gpio_pm_1bit NULL
+#define samsung_gpio_pm_2bit NULL
+#define samsung_gpio_pm_4bit NULL
#define __gpio_pm(x) NULL
#endif /* CONFIG_PM */
/* locking wrappers to deal with multiple access to the same gpio bank */
-#define s3c_gpio_lock(_oc, _fl) spin_lock_irqsave(&(_oc)->lock, _fl)
-#define s3c_gpio_unlock(_oc, _fl) spin_unlock_irqrestore(&(_oc)->lock, _fl)
+#define samsung_gpio_lock(_oc, _fl) spin_lock_irqsave(&(_oc)->lock, _fl)
+#define samsung_gpio_unlock(_oc, _fl) spin_unlock_irqrestore(&(_oc)->lock, _fl)
--- /dev/null
+/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
+ *
+ * Copyright (c) 2003-2009 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - hardware
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __MACH_GPIO_FNS_H
+#define __MACH_GPIO_FNS_H __FILE__
+
+/* These functions are in the to-be-removed category and it is strongly
+ * encouraged not to use these in new code. They will be marked deprecated
+ * very soon.
+ *
+ * Most of the functionality can be either replaced by the gpiocfg calls
+ * for the s3c platform or by the generic GPIOlib API.
+ *
+ * As of 2.6.35-rc, these will be removed, with the few drivers using them
+ * either replaced or given a wrapper until the calls can be removed.
+*/
+
+#include <plat/gpio-cfg.h>
+
+static inline void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int cfg)
+{
+ /* 1:1 mapping between cfgpin and setcfg calls at the moment */
+ s3c_gpio_cfgpin(pin, cfg);
+}
+
+/* external functions for GPIO support
+ *
+ * These allow various different clients to access the same GPIO
+ * registers without conflicting. If your driver only owns the entire
+ * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
+*/
+
+extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
+
+/* s3c2410_gpio_getirq
+ *
+ * turn the given pin number into the corresponding IRQ number
+ *
+ * returns:
+ * < 0 = no interrupt for this pin
+ * >=0 = interrupt number for the pin
+*/
+
+extern int s3c2410_gpio_getirq(unsigned int pin);
+
+/* s3c2410_gpio_irqfilter
+ *
+ * set the irq filtering on the given pin
+ *
+ * on = 0 => disable filtering
+ * 1 => enable filtering
+ *
+ * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
+ * width of filter (0 through 63)
+ *
+ *
+*/
+
+extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
+ unsigned int config);
+
+/* s3c2410_gpio_pullup
+ *
+ * This call should be replaced with s3c_gpio_setpull().
+ *
+ * As a note, there is currently no distinction between pull-up and pull-down
+ * in the s3c24xx series devices with only an on/off configuration.
+ */
+
+/* s3c2410_gpio_pullup
+ *
+ * configure the pull-up control on the given pin
+ *
+ * to = 1 => disable the pull-up
+ * 0 => enable the pull-up
+ *
+ * eg;
+ *
+ * s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
+ * s3c2410_gpio_pullup(S3C2410_GPE(8), 0);
+*/
+
+extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
+
+extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
+
+extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
+
+#endif /* __MACH_GPIO_FNS_H */
extern void s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *i2c);
extern void s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *i2c);
extern void s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *i2c);
/* defined by architecture to configure gpio */
extern void s3c_i2c0_cfg_gpio(struct platform_device *dev);
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/irq.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C24XX CPU IRQ support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
+
+#define irqdbf(x...)
+#define irqdbf2(x...)
+
+#define EXTINT_OFF (IRQ_EINT4 - 4)
+
+/* these are exported for arch/arm/mach-* usage */
+extern struct irq_chip s3c_irq_level_chip;
+extern struct irq_chip s3c_irq_chip;
+
+static inline void s3c_irqsub_mask(unsigned int irqno,
+ unsigned int parentbit,
+ int subcheck)
+{
+ unsigned long mask;
+ unsigned long submask;
+
+ submask = __raw_readl(S3C2410_INTSUBMSK);
+ mask = __raw_readl(S3C2410_INTMSK);
+
+ submask |= (1UL << (irqno - IRQ_S3CUART_RX0));
+
+ /* check to see if we need to mask the parent IRQ */
+
+ if ((submask & subcheck) == subcheck)
+ __raw_writel(mask | parentbit, S3C2410_INTMSK);
+
+ /* write back masks */
+ __raw_writel(submask, S3C2410_INTSUBMSK);
+
+}
+
+static inline void s3c_irqsub_unmask(unsigned int irqno,
+ unsigned int parentbit)
+{
+ unsigned long mask;
+ unsigned long submask;
+
+ submask = __raw_readl(S3C2410_INTSUBMSK);
+ mask = __raw_readl(S3C2410_INTMSK);
+
+ submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0));
+ mask &= ~parentbit;
+
+ /* write back masks */
+ __raw_writel(submask, S3C2410_INTSUBMSK);
+ __raw_writel(mask, S3C2410_INTMSK);
+}
+
+
+static inline void s3c_irqsub_maskack(unsigned int irqno,
+ unsigned int parentmask,
+ unsigned int group)
+{
+ unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
+
+ s3c_irqsub_mask(irqno, parentmask, group);
+
+ __raw_writel(bit, S3C2410_SUBSRCPND);
+
+ /* only ack parent if we've got all the irqs (seems we must
+ * ack, all and hope that the irq system retriggers ok when
+ * the interrupt goes off again)
+ */
+
+ if (1) {
+ __raw_writel(parentmask, S3C2410_SRCPND);
+ __raw_writel(parentmask, S3C2410_INTPND);
+ }
+}
+
+static inline void s3c_irqsub_ack(unsigned int irqno,
+ unsigned int parentmask,
+ unsigned int group)
+{
+ unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
+
+ __raw_writel(bit, S3C2410_SUBSRCPND);
+
+ /* only ack parent if we've got all the irqs (seems we must
+ * ack, all and hope that the irq system retriggers ok when
+ * the interrupt goes off again)
+ */
+
+ if (1) {
+ __raw_writel(parentmask, S3C2410_SRCPND);
+ __raw_writel(parentmask, S3C2410_INTPND);
+ }
+}
+
+/* exported for use in arch/arm/mach-s3c2410 */
+
+#ifdef CONFIG_PM
+extern int s3c_irq_wake(struct irq_data *data, unsigned int state);
+#else
+#define s3c_irq_wake NULL
+#endif
+
+extern int s3c_irqext_type(struct irq_data *d, unsigned int type);
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/irqs.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P Common IRQ support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_SAMSUNG_IRQS_H
+#define __PLAT_SAMSUNG_IRQS_H __FILE__
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ *
+ * note, since we're using the VICs, our start must be a
+ * mulitple of 32 to allow the common code to work
+ */
+
+#define S5P_IRQ_OFFSET (32)
+
+#define S5P_IRQ(x) ((x) + S5P_IRQ_OFFSET)
+
+#define S5P_VIC0_BASE S5P_IRQ(0)
+#define S5P_VIC1_BASE S5P_IRQ(32)
+#define S5P_VIC2_BASE S5P_IRQ(64)
+#define S5P_VIC3_BASE S5P_IRQ(96)
+
+#define VIC_BASE(x) (S5P_VIC0_BASE + ((x)*32))
+
+#define IRQ_VIC0_BASE S5P_VIC0_BASE
+#define IRQ_VIC1_BASE S5P_VIC1_BASE
+#define IRQ_VIC2_BASE S5P_VIC2_BASE
+
+/* VIC based IRQs */
+
+#define S5P_IRQ_VIC0(x) (S5P_VIC0_BASE + (x))
+#define S5P_IRQ_VIC1(x) (S5P_VIC1_BASE + (x))
+#define S5P_IRQ_VIC2(x) (S5P_VIC2_BASE + (x))
+#define S5P_IRQ_VIC3(x) (S5P_VIC3_BASE + (x))
+
+#define S5P_TIMER_IRQ(x) (11 + (x))
+
+#define IRQ_TIMER0 S5P_TIMER_IRQ(0)
+#define IRQ_TIMER1 S5P_TIMER_IRQ(1)
+#define IRQ_TIMER2 S5P_TIMER_IRQ(2)
+#define IRQ_TIMER3 S5P_TIMER_IRQ(3)
+#define IRQ_TIMER4 S5P_TIMER_IRQ(4)
+
+#define IRQ_EINT(x) ((x) < 16 ? ((x) + S5P_EINT_BASE1) \
+ : ((x) - 16 + S5P_EINT_BASE2))
+
+#define EINT_OFFSET(irq) ((irq) < S5P_EINT_BASE2 ? \
+ ((irq) - S5P_EINT_BASE1) : \
+ ((irq) + 16 - S5P_EINT_BASE2))
+
+#define IRQ_EINT_BIT(x) EINT_OFFSET(x)
+
+/* Typically only a few gpio chips require gpio interrupt support.
+ To avoid memory waste irq descriptors are allocated only for
+ S5P_GPIOINT_GROUP_COUNT chips, each with total number of
+ S5P_GPIOINT_GROUP_SIZE pins/irqs. Each GPIOINT group can be assiged
+ to any gpio chip with the s5p_register_gpio_interrupt() function */
+#define S5P_GPIOINT_GROUP_COUNT 4
+#define S5P_GPIOINT_GROUP_SIZE 8
+#define S5P_GPIOINT_COUNT (S5P_GPIOINT_GROUP_COUNT * S5P_GPIOINT_GROUP_SIZE)
+
+/* IRQ types common for all s5p platforms */
+#define S5P_IRQ_TYPE_LEVEL_LOW (0x00)
+#define S5P_IRQ_TYPE_LEVEL_HIGH (0x01)
+#define S5P_IRQ_TYPE_EDGE_FALLING (0x02)
+#define S5P_IRQ_TYPE_EDGE_RISING (0x03)
+#define S5P_IRQ_TYPE_EDGE_BOTH (0x04)
+
+#endif /* __PLAT_SAMSUNG_IRQS_H */
--- /dev/null
+#ifndef _ARCH_MCI_H
+#define _ARCH_MCI_H
+
+/**
+ * struct s3c24xx_mci_pdata - sd/mmc controller platform data
+ * @no_wprotect: Set this to indicate there is no write-protect switch.
+ * @no_detect: Set this if there is no detect switch.
+ * @wprotect_invert: Invert the default sense of the write protect switch.
+ * @detect_invert: Invert the default sense of the write protect switch.
+ * @use_dma: Set to allow the use of DMA.
+ * @gpio_detect: GPIO number for the card detect line.
+ * @gpio_wprotect: GPIO number for the write protect line.
+ * @ocr_avail: The mask of the available power states, non-zero to use.
+ * @set_power: Callback to control the power mode.
+ *
+ * The @gpio_detect is used for card detection when @no_wprotect is unset,
+ * and the default sense is that 0 returned from gpio_get_value() means
+ * that a card is inserted. If @detect_invert is set, then the value from
+ * gpio_get_value() is inverted, which makes 1 mean card inserted.
+ *
+ * The driver will use @gpio_wprotect to signal whether the card is write
+ * protected if @no_wprotect is not set. A 0 returned from gpio_get_value()
+ * means the card is read/write, and 1 means read-only. The @wprotect_invert
+ * will invert the value returned from gpio_get_value().
+ *
+ * Card power is set by @ocr_availa, using MCC_VDD_ constants if it is set
+ * to a non-zero value, otherwise the default of 3.2-3.4V is used.
+ */
+struct s3c24xx_mci_pdata {
+ unsigned int no_wprotect:1;
+ unsigned int no_detect:1;
+ unsigned int wprotect_invert:1;
+ unsigned int detect_invert:1; /* set => detect active high */
+ unsigned int use_dma:1;
+
+ unsigned int gpio_detect;
+ unsigned int gpio_wprotect;
+ unsigned long ocr_avail;
+ void (*set_power)(unsigned char power_mode,
+ unsigned short vdd);
+};
+
+/**
+ * s3c24xx_mci_set_platdata - set platform data for mmc/sdi device
+ * @pdata: The platform data
+ *
+ * Copy the platform data supplied by @pdata so that this can be marked
+ * __initdata.
+ */
+extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata);
+
+#endif /* _ARCH_NCI_H */
--- /dev/null
+/*
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PLAT_SAMSUNG_MFC_H
+#define __PLAT_SAMSUNG_MFC_H __FILE__
+
+/**
+ * s5p_mfc_reserve_mem - function to early reserve memory for MFC driver
+ * @rbase: base address for MFC 'right' memory interface
+ * @rsize: size of the memory reserved for MFC 'right' interface
+ * @lbase: base address for MFC 'left' memory interface
+ * @lsize: size of the memory reserved for MFC 'left' interface
+ *
+ * This function reserves system memory for both MFC device memory
+ * interfaces and registers it to respective struct device entries as
+ * coherent memory.
+ */
+void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
+ phys_addr_t lbase, unsigned int lsize);
+
+#endif /* __PLAT_SAMSUNG_MFC_H */
--- /dev/null
+/*
+ * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd.
+ *
+ * S5P series MIPI CSI slave device support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PLAT_SAMSUNG_MIPI_CSIS_H_
+#define __PLAT_SAMSUNG_MIPI_CSIS_H_ __FILE__
+
+struct platform_device;
+
+/**
+ * struct s5p_platform_mipi_csis - platform data for S5P MIPI-CSIS driver
+ * @clk_rate: bus clock frequency
+ * @lanes: number of data lanes used
+ * @alignment: data alignment in bits
+ * @hs_settle: HS-RX settle time
+ * @fixed_phy_vdd: false to enable external D-PHY regulator management in the
+ * driver or true in case this regulator has no enable function
+ * @phy_enable: pointer to a callback controlling D-PHY enable/reset
+ */
+struct s5p_platform_mipi_csis {
+ unsigned long clk_rate;
+ u8 lanes;
+ u8 alignment;
+ u8 hs_settle;
+ bool fixed_phy_vdd;
+ int (*phy_enable)(struct platform_device *pdev, bool on);
+};
+
+/**
+ * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control
+ * @pdev: MIPI-CSIS platform device
+ * @on: true to enable D-PHY and deassert its reset
+ * false to disable D-PHY
+ */
+int s5p_csis_phy_enable(struct platform_device *pdev, bool on);
+
+#endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/pll.h
+ *
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * Samsung PLL codes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <asm/div64.h>
+
+#define S3C24XX_PLL_MDIV_MASK (0xFF)
+#define S3C24XX_PLL_PDIV_MASK (0x1F)
+#define S3C24XX_PLL_SDIV_MASK (0x3)
+#define S3C24XX_PLL_MDIV_SHIFT (12)
+#define S3C24XX_PLL_PDIV_SHIFT (4)
+#define S3C24XX_PLL_SDIV_SHIFT (0)
+
+static inline unsigned int s3c24xx_get_pll(unsigned int pllval,
+ unsigned int baseclk)
+{
+ unsigned int mdiv, pdiv, sdiv;
+ uint64_t fvco;
+
+ mdiv = (pllval >> S3C24XX_PLL_MDIV_SHIFT) & S3C24XX_PLL_MDIV_MASK;
+ pdiv = (pllval >> S3C24XX_PLL_PDIV_SHIFT) & S3C24XX_PLL_PDIV_MASK;
+ sdiv = (pllval >> S3C24XX_PLL_SDIV_SHIFT) & S3C24XX_PLL_SDIV_MASK;
+
+ fvco = (uint64_t)baseclk * (mdiv + 8);
+ do_div(fvco, (pdiv + 2) << sdiv);
+
+ return (unsigned int)fvco;
+}
+
+#define S3C2416_PLL_MDIV_MASK (0x3FF)
+#define S3C2416_PLL_PDIV_MASK (0x3F)
+#define S3C2416_PLL_SDIV_MASK (0x7)
+#define S3C2416_PLL_MDIV_SHIFT (14)
+#define S3C2416_PLL_PDIV_SHIFT (5)
+#define S3C2416_PLL_SDIV_SHIFT (0)
+
+static inline unsigned int s3c2416_get_pll(unsigned int pllval,
+ unsigned int baseclk)
+{
+ unsigned int mdiv, pdiv, sdiv;
+ uint64_t fvco;
+
+ mdiv = (pllval >> S3C2416_PLL_MDIV_SHIFT) & S3C2416_PLL_MDIV_MASK;
+ pdiv = (pllval >> S3C2416_PLL_PDIV_SHIFT) & S3C2416_PLL_PDIV_MASK;
+ sdiv = (pllval >> S3C2416_PLL_SDIV_SHIFT) & S3C2416_PLL_SDIV_MASK;
+
+ fvco = (uint64_t)baseclk * mdiv;
+ do_div(fvco, (pdiv << sdiv));
+
+ return (unsigned int)fvco;
+}
+
+#define S3C6400_PLL_MDIV_MASK (0x3FF)
+#define S3C6400_PLL_PDIV_MASK (0x3F)
+#define S3C6400_PLL_SDIV_MASK (0x7)
+#define S3C6400_PLL_MDIV_SHIFT (16)
+#define S3C6400_PLL_PDIV_SHIFT (8)
+#define S3C6400_PLL_SDIV_SHIFT (0)
+
+static inline unsigned long s3c6400_get_pll(unsigned long baseclk,
+ u32 pllcon)
+{
+ u32 mdiv, pdiv, sdiv;
+ u64 fvco = baseclk;
+
+ mdiv = (pllcon >> S3C6400_PLL_MDIV_SHIFT) & S3C6400_PLL_MDIV_MASK;
+ pdiv = (pllcon >> S3C6400_PLL_PDIV_SHIFT) & S3C6400_PLL_PDIV_MASK;
+ sdiv = (pllcon >> S3C6400_PLL_SDIV_SHIFT) & S3C6400_PLL_SDIV_MASK;
+
+ fvco *= mdiv;
+ do_div(fvco, (pdiv << sdiv));
+
+ return (unsigned long)fvco;
+}
+
+#define PLL6553X_MDIV_MASK (0x7F)
+#define PLL6553X_PDIV_MASK (0x1F)
+#define PLL6553X_SDIV_MASK (0x3)
+#define PLL6553X_KDIV_MASK (0xFFFF)
+#define PLL6553X_MDIV_SHIFT (16)
+#define PLL6553X_PDIV_SHIFT (8)
+#define PLL6553X_SDIV_SHIFT (0)
+
+static inline unsigned long s3c_get_pll6553x(unsigned long baseclk,
+ u32 pll_con0, u32 pll_con1)
+{
+ unsigned long result;
+ u32 mdiv, pdiv, sdiv, kdiv;
+ u64 tmp;
+
+ mdiv = (pll_con0 >> PLL6553X_MDIV_SHIFT) & PLL6553X_MDIV_MASK;
+ pdiv = (pll_con0 >> PLL6553X_PDIV_SHIFT) & PLL6553X_PDIV_MASK;
+ sdiv = (pll_con0 >> PLL6553X_SDIV_SHIFT) & PLL6553X_SDIV_MASK;
+ kdiv = pll_con1 & PLL6553X_KDIV_MASK;
+
+ /*
+ * We need to multiple baseclk by mdiv (the integer part) and kdiv
+ * which is in 2^16ths, so shift mdiv up (does not overflow) and
+ * add kdiv before multiplying. The use of tmp is to avoid any
+ * overflows before shifting bac down into result when multipling
+ * by the mdiv and kdiv pair.
+ */
+
+ tmp = baseclk;
+ tmp *= (mdiv << 16) + kdiv;
+ do_div(tmp, (pdiv << sdiv));
+ result = tmp >> 16;
+
+ return result;
+}
+
+#define PLL35XX_MDIV_MASK (0x3FF)
+#define PLL35XX_PDIV_MASK (0x3F)
+#define PLL35XX_SDIV_MASK (0x7)
+#define PLL35XX_MDIV_SHIFT (16)
+#define PLL35XX_PDIV_SHIFT (8)
+#define PLL35XX_SDIV_SHIFT (0)
+
+static inline unsigned long s5p_get_pll35xx(unsigned long baseclk, u32 pll_con)
+{
+ u32 mdiv, pdiv, sdiv;
+ u64 fvco = baseclk;
+
+ mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK;
+ pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK;
+ sdiv = (pll_con >> PLL35XX_SDIV_SHIFT) & PLL35XX_SDIV_MASK;
+
+ fvco *= mdiv;
+ do_div(fvco, (pdiv << sdiv));
+
+ return (unsigned long)fvco;
+}
+
+#define PLL36XX_KDIV_MASK (0xFFFF)
+#define PLL36XX_MDIV_MASK (0x1FF)
+#define PLL36XX_PDIV_MASK (0x3F)
+#define PLL36XX_SDIV_MASK (0x7)
+#define PLL36XX_MDIV_SHIFT (16)
+#define PLL36XX_PDIV_SHIFT (8)
+#define PLL36XX_SDIV_SHIFT (0)
+
+static inline unsigned long s5p_get_pll36xx(unsigned long baseclk,
+ u32 pll_con0, u32 pll_con1)
+{
+ unsigned long result;
+ u32 mdiv, pdiv, sdiv, kdiv;
+ u64 tmp;
+
+ mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK;
+ pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK;
+ sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK;
+ kdiv = pll_con1 & PLL36XX_KDIV_MASK;
+
+ tmp = baseclk;
+
+ tmp *= (mdiv << 16) + kdiv;
+ do_div(tmp, (pdiv << sdiv));
+ result = tmp >> 16;
+
+ return result;
+}
+
+#define PLL45XX_MDIV_MASK (0x3FF)
+#define PLL45XX_PDIV_MASK (0x3F)
+#define PLL45XX_SDIV_MASK (0x7)
+#define PLL45XX_MDIV_SHIFT (16)
+#define PLL45XX_PDIV_SHIFT (8)
+#define PLL45XX_SDIV_SHIFT (0)
+
+enum pll45xx_type_t {
+ pll_4500,
+ pll_4502,
+ pll_4508
+};
+
+static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con,
+ enum pll45xx_type_t pll_type)
+{
+ u32 mdiv, pdiv, sdiv;
+ u64 fvco = baseclk;
+
+ mdiv = (pll_con >> PLL45XX_MDIV_SHIFT) & PLL45XX_MDIV_MASK;
+ pdiv = (pll_con >> PLL45XX_PDIV_SHIFT) & PLL45XX_PDIV_MASK;
+ sdiv = (pll_con >> PLL45XX_SDIV_SHIFT) & PLL45XX_SDIV_MASK;
+
+ if (pll_type == pll_4508)
+ sdiv = sdiv - 1;
+
+ fvco *= mdiv;
+ do_div(fvco, (pdiv << sdiv));
+
+ return (unsigned long)fvco;
+}
+
+/* CON0 bit-fields */
+#define PLL46XX_MDIV_MASK (0x1FF)
+#define PLL46XX_PDIV_MASK (0x3F)
+#define PLL46XX_SDIV_MASK (0x7)
+#define PLL46XX_LOCKED_SHIFT (29)
+#define PLL46XX_MDIV_SHIFT (16)
+#define PLL46XX_PDIV_SHIFT (8)
+#define PLL46XX_SDIV_SHIFT (0)
+
+/* CON1 bit-fields */
+#define PLL46XX_MRR_MASK (0x1F)
+#define PLL46XX_MFR_MASK (0x3F)
+#define PLL46XX_KDIV_MASK (0xFFFF)
+#define PLL4650C_KDIV_MASK (0xFFF)
+#define PLL46XX_MRR_SHIFT (24)
+#define PLL46XX_MFR_SHIFT (16)
+#define PLL46XX_KDIV_SHIFT (0)
+
+enum pll46xx_type_t {
+ pll_4600,
+ pll_4650,
+ pll_4650c,
+};
+
+static inline unsigned long s5p_get_pll46xx(unsigned long baseclk,
+ u32 pll_con0, u32 pll_con1,
+ enum pll46xx_type_t pll_type)
+{
+ unsigned long result;
+ u32 mdiv, pdiv, sdiv, kdiv;
+ u64 tmp;
+
+ mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK;
+ pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK;
+ sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK;
+ kdiv = pll_con1 & PLL46XX_KDIV_MASK;
+
+ if (pll_type == pll_4650c)
+ kdiv = pll_con1 & PLL4650C_KDIV_MASK;
+ else
+ kdiv = pll_con1 & PLL46XX_KDIV_MASK;
+
+ tmp = baseclk;
+
+ if (pll_type == pll_4600) {
+ tmp *= (mdiv << 16) + kdiv;
+ do_div(tmp, (pdiv << sdiv));
+ result = tmp >> 16;
+ } else {
+ tmp *= (mdiv << 10) + kdiv;
+ do_div(tmp, (pdiv << sdiv));
+ result = tmp >> 10;
+ }
+
+ return result;
+}
+
+#define PLL90XX_MDIV_MASK (0xFF)
+#define PLL90XX_PDIV_MASK (0x3F)
+#define PLL90XX_SDIV_MASK (0x7)
+#define PLL90XX_KDIV_MASK (0xffff)
+#define PLL90XX_LOCKED_SHIFT (29)
+#define PLL90XX_MDIV_SHIFT (16)
+#define PLL90XX_PDIV_SHIFT (8)
+#define PLL90XX_SDIV_SHIFT (0)
+#define PLL90XX_KDIV_SHIFT (0)
+
+static inline unsigned long s5p_get_pll90xx(unsigned long baseclk,
+ u32 pll_con, u32 pll_conk)
+{
+ unsigned long result;
+ u32 mdiv, pdiv, sdiv, kdiv;
+ u64 tmp;
+
+ mdiv = (pll_con >> PLL90XX_MDIV_SHIFT) & PLL90XX_MDIV_MASK;
+ pdiv = (pll_con >> PLL90XX_PDIV_SHIFT) & PLL90XX_PDIV_MASK;
+ sdiv = (pll_con >> PLL90XX_SDIV_SHIFT) & PLL90XX_SDIV_MASK;
+ kdiv = pll_conk & PLL90XX_KDIV_MASK;
+
+ /*
+ * We need to multiple baseclk by mdiv (the integer part) and kdiv
+ * which is in 2^16ths, so shift mdiv up (does not overflow) and
+ * add kdiv before multiplying. The use of tmp is to avoid any
+ * overflows before shifting bac down into result when multipling
+ * by the mdiv and kdiv pair.
+ */
+
+ tmp = baseclk;
+ tmp *= (mdiv << 16) + kdiv;
+ do_div(tmp, (pdiv << sdiv));
+ result = tmp >> 16;
+
+ return result;
+}
+
+#define PLL65XX_MDIV_MASK (0x3FF)
+#define PLL65XX_PDIV_MASK (0x3F)
+#define PLL65XX_SDIV_MASK (0x7)
+#define PLL65XX_MDIV_SHIFT (16)
+#define PLL65XX_PDIV_SHIFT (8)
+#define PLL65XX_SDIV_SHIFT (0)
+
+static inline unsigned long s5p_get_pll65xx(unsigned long baseclk, u32 pll_con)
+{
+ u32 mdiv, pdiv, sdiv;
+ u64 fvco = baseclk;
+
+ mdiv = (pll_con >> PLL65XX_MDIV_SHIFT) & PLL65XX_MDIV_MASK;
+ pdiv = (pll_con >> PLL65XX_PDIV_SHIFT) & PLL65XX_PDIV_MASK;
+ sdiv = (pll_con >> PLL65XX_SDIV_SHIFT) & PLL65XX_SDIV_MASK;
+
+ fvco *= mdiv;
+ do_div(fvco, (pdiv << sdiv));
+
+ return (unsigned long)fvco;
+}
+++ /dev/null
-/* arch/arm/plat-samsung/include/plat/pll6553x.h
- * partially from arch/arm/mach-s3c64xx/include/mach/pll.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * Samsung PLL6553x PLL code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* S3C6400 and compatible (S3C2416, etc.) EPLL code */
-
-#define PLL6553X_MDIV_MASK ((1 << (23-16)) - 1)
-#define PLL6553X_PDIV_MASK ((1 << (13-8)) - 1)
-#define PLL6553X_SDIV_MASK ((1 << (2-0)) - 1)
-#define PLL6553X_MDIV_SHIFT (16)
-#define PLL6553X_PDIV_SHIFT (8)
-#define PLL6553X_SDIV_SHIFT (0)
-#define PLL6553X_KDIV_MASK (0xffff)
-
-static inline unsigned long s3c_get_pll6553x(unsigned long baseclk,
- u32 pll0, u32 pll1)
-{
- unsigned long result;
- u32 mdiv, pdiv, sdiv, kdiv;
- u64 tmp;
-
- mdiv = (pll0 >> PLL6553X_MDIV_SHIFT) & PLL6553X_MDIV_MASK;
- pdiv = (pll0 >> PLL6553X_PDIV_SHIFT) & PLL6553X_PDIV_MASK;
- sdiv = (pll0 >> PLL6553X_SDIV_SHIFT) & PLL6553X_SDIV_MASK;
- kdiv = pll1 & PLL6553X_KDIV_MASK;
-
- /* We need to multiple baseclk by mdiv (the integer part) and kdiv
- * which is in 2^16ths, so shift mdiv up (does not overflow) and
- * add kdiv before multiplying. The use of tmp is to avoid any
- * overflows before shifting bac down into result when multipling
- * by the mdiv and kdiv pair.
- */
-
- tmp = baseclk;
- tmp *= (mdiv << 16) + kdiv;
- do_div(tmp, (pdiv << sdiv));
- result = tmp >> 16;
-
- return result;
-}
extern void s3c_pm_configure_extint(void);
/**
- * s3c_pm_restore_gpios() - restore the state of the gpios after sleep.
+ * samsung_pm_restore_gpios() - restore the state of the gpios after sleep.
*
* Restore the state of the GPIO pins after sleep, which may involve ensuring
* that we do not glitch the state of the pins from that the bootloader's
* resume code has done.
*/
-extern void s3c_pm_restore_gpios(void);
+extern void samsung_pm_restore_gpios(void);
/**
- * s3c_pm_save_gpios() - save the state of the GPIOs for restoring after sleep.
+ * samsung_pm_save_gpios() - save the state of the GPIOs for restoring after sleep.
*
- * Save the GPIO states for resotration on resume. See s3c_pm_restore_gpios().
+ * Save the GPIO states for resotration on resume. See samsung_pm_restore_gpios().
*/
-extern void s3c_pm_save_gpios(void);
+extern void samsung_pm_save_gpios(void);
extern void s3c_pm_save_core(void);
extern void s3c_pm_restore_core(void);
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/pwm-clock.h
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * SAMSUNG - pwm clock and timer support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_PWM_CLOCK_H
+#define __ASM_PLAT_PWM_CLOCK_H __FILE__
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @tcfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+ if (soc_is_s3c24xx())
+ return tcfg == S3C2410_TCFG1_MUX_TCLK;
+ else if (soc_is_s3c64xx() || soc_is_s5pc100())
+ return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
+ else if (soc_is_s5p6440() || soc_is_s5p6450())
+ return 0;
+ else
+ return tcfg == S3C64XX_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+ if (soc_is_s3c24xx())
+ return 1 << (tcfg1 + 1);
+ else
+ return 1 << tcfg1;
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+ if (soc_is_s3c24xx())
+ return 0;
+ else
+ return 1;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+ if (soc_is_s3c24xx())
+ return ilog2(div) - 1;
+ else
+ return ilog2(div);
+}
+#endif /* __ASM_PLAT_PWM_CLOCK_H */
#define S3C2410_ADCDAT0 S3C2410_ADCREG(0x0C)
#define S3C2410_ADCDAT1 S3C2410_ADCREG(0x10)
#define S3C64XX_ADCUPDN S3C2410_ADCREG(0x14)
+#define S3C2443_ADCMUX S3C2410_ADCREG(0x18)
#define S3C64XX_ADCCLRINT S3C2410_ADCREG(0x18)
#define S5P_ADCMUX S3C2410_ADCREG(0x1C)
#define S3C64XX_ADCCLRINTPNDNUP S3C2410_ADCREG(0x20)
#define S3C2410_ADCCON_PRSCVLMASK (0xFF<<6)
#define S3C2410_ADCCON_SELMUX(x) (((x)&0x7)<<3)
#define S3C2410_ADCCON_MUXMASK (0x7<<3)
+#define S3C2416_ADCCON_RESSEL (1 << 3)
#define S3C2410_ADCCON_STDBM (1<<2)
#define S3C2410_ADCCON_READ_START (1<<1)
#define S3C2410_ADCCON_ENABLE_START (1<<0)
/* ADCTSC Register Bits */
+#define S3C2443_ADCTSC_UD_SEN (1 << 8)
#define S3C2410_ADCTSC_YM_SEN (1<<7)
#define S3C2410_ADCTSC_YP_SEN (1<<6)
#define S3C2410_ADCTSC_XM_SEN (1<<5)
--- /dev/null
+/* arch/arm/plat-samsung/include/plat/regs-dma.h
+ *
+ * Copyright (C) 2003-2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C24XX DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_REGS_DMA_H
+#define __ASM_PLAT_REGS_DMA_H __FILE__
+
+#define S3C2410_DMA_DISRC (0x00)
+#define S3C2410_DMA_DISRCC (0x04)
+#define S3C2410_DMA_DIDST (0x08)
+#define S3C2410_DMA_DIDSTC (0x0C)
+#define S3C2410_DMA_DCON (0x10)
+#define S3C2410_DMA_DSTAT (0x14)
+#define S3C2410_DMA_DCSRC (0x18)
+#define S3C2410_DMA_DCDST (0x1C)
+#define S3C2410_DMA_DMASKTRIG (0x20)
+#define S3C2412_DMA_DMAREQSEL (0x24)
+#define S3C2443_DMA_DMAREQSEL (0x24)
+
+#define S3C2410_DISRCC_INC (1 << 0)
+#define S3C2410_DISRCC_APB (1 << 1)
+
+#define S3C2410_DMASKTRIG_STOP (1 << 2)
+#define S3C2410_DMASKTRIG_ON (1 << 1)
+#define S3C2410_DMASKTRIG_SWTRIG (1 << 0)
+
+#define S3C2410_DCON_DEMAND (0 << 31)
+#define S3C2410_DCON_HANDSHAKE (1 << 31)
+#define S3C2410_DCON_SYNC_PCLK (0 << 30)
+#define S3C2410_DCON_SYNC_HCLK (1 << 30)
+
+#define S3C2410_DCON_INTREQ (1 << 29)
+
+#define S3C2410_DCON_CH0_XDREQ0 (0 << 24)
+#define S3C2410_DCON_CH0_UART0 (1 << 24)
+#define S3C2410_DCON_CH0_SDI (2 << 24)
+#define S3C2410_DCON_CH0_TIMER (3 << 24)
+#define S3C2410_DCON_CH0_USBEP1 (4 << 24)
+
+#define S3C2410_DCON_CH1_XDREQ1 (0 << 24)
+#define S3C2410_DCON_CH1_UART1 (1 << 24)
+#define S3C2410_DCON_CH1_I2SSDI (2 << 24)
+#define S3C2410_DCON_CH1_SPI (3 << 24)
+#define S3C2410_DCON_CH1_USBEP2 (4 << 24)
+
+#define S3C2410_DCON_CH2_I2SSDO (0 << 24)
+#define S3C2410_DCON_CH2_I2SSDI (1 << 24)
+#define S3C2410_DCON_CH2_SDI (2 << 24)
+#define S3C2410_DCON_CH2_TIMER (3 << 24)
+#define S3C2410_DCON_CH2_USBEP3 (4 << 24)
+
+#define S3C2410_DCON_CH3_UART2 (0 << 24)
+#define S3C2410_DCON_CH3_SDI (1 << 24)
+#define S3C2410_DCON_CH3_SPI (2 << 24)
+#define S3C2410_DCON_CH3_TIMER (3 << 24)
+#define S3C2410_DCON_CH3_USBEP4 (4 << 24)
+
+#define S3C2410_DCON_SRCSHIFT (24)
+#define S3C2410_DCON_SRCMASK (7 << 24)
+
+#define S3C2410_DCON_BYTE (0 << 20)
+#define S3C2410_DCON_HALFWORD (1 << 20)
+#define S3C2410_DCON_WORD (2 << 20)
+
+#define S3C2410_DCON_AUTORELOAD (0 << 22)
+#define S3C2410_DCON_NORELOAD (1 << 22)
+#define S3C2410_DCON_HWTRIG (1 << 23)
+
+#ifdef CONFIG_CPU_S3C2440
+
+#define S3C2440_DIDSTC_CHKINT (1 << 2)
+
+#define S3C2440_DCON_CH0_I2SSDO (5 << 24)
+#define S3C2440_DCON_CH0_PCMIN (6 << 24)
+
+#define S3C2440_DCON_CH1_PCMOUT (5 << 24)
+#define S3C2440_DCON_CH1_SDI (6 << 24)
+
+#define S3C2440_DCON_CH2_PCMIN (5 << 24)
+#define S3C2440_DCON_CH2_MICIN (6 << 24)
+
+#define S3C2440_DCON_CH3_MICIN (5 << 24)
+#define S3C2440_DCON_CH3_PCMOUT (6 << 24)
+#endif /* CONFIG_CPU_S3C2440 */
+
+#ifdef CONFIG_CPU_S3C2412
+
+#define S3C2412_DMAREQSEL_SRC(x) ((x) << 1)
+
+#define S3C2412_DMAREQSEL_HW (1)
+
+#define S3C2412_DMAREQSEL_SPI0TX S3C2412_DMAREQSEL_SRC(0)
+#define S3C2412_DMAREQSEL_SPI0RX S3C2412_DMAREQSEL_SRC(1)
+#define S3C2412_DMAREQSEL_SPI1TX S3C2412_DMAREQSEL_SRC(2)
+#define S3C2412_DMAREQSEL_SPI1RX S3C2412_DMAREQSEL_SRC(3)
+#define S3C2412_DMAREQSEL_I2STX S3C2412_DMAREQSEL_SRC(4)
+#define S3C2412_DMAREQSEL_I2SRX S3C2412_DMAREQSEL_SRC(5)
+#define S3C2412_DMAREQSEL_TIMER S3C2412_DMAREQSEL_SRC(9)
+#define S3C2412_DMAREQSEL_SDI S3C2412_DMAREQSEL_SRC(10)
+#define S3C2412_DMAREQSEL_USBEP1 S3C2412_DMAREQSEL_SRC(13)
+#define S3C2412_DMAREQSEL_USBEP2 S3C2412_DMAREQSEL_SRC(14)
+#define S3C2412_DMAREQSEL_USBEP3 S3C2412_DMAREQSEL_SRC(15)
+#define S3C2412_DMAREQSEL_USBEP4 S3C2412_DMAREQSEL_SRC(16)
+#define S3C2412_DMAREQSEL_XDREQ0 S3C2412_DMAREQSEL_SRC(17)
+#define S3C2412_DMAREQSEL_XDREQ1 S3C2412_DMAREQSEL_SRC(18)
+#define S3C2412_DMAREQSEL_UART0_0 S3C2412_DMAREQSEL_SRC(19)
+#define S3C2412_DMAREQSEL_UART0_1 S3C2412_DMAREQSEL_SRC(20)
+#define S3C2412_DMAREQSEL_UART1_0 S3C2412_DMAREQSEL_SRC(21)
+#define S3C2412_DMAREQSEL_UART1_1 S3C2412_DMAREQSEL_SRC(22)
+#define S3C2412_DMAREQSEL_UART2_0 S3C2412_DMAREQSEL_SRC(23)
+#define S3C2412_DMAREQSEL_UART2_1 S3C2412_DMAREQSEL_SRC(24)
+#endif /* CONFIG_CPU_S3C2412 */
+
+#ifdef CONFIG_CPU_S3C2443
+
+#define S3C2443_DMAREQSEL_SRC(x) ((x) << 1)
+
+#define S3C2443_DMAREQSEL_HW (1)
+
+#define S3C2443_DMAREQSEL_SPI0TX S3C2443_DMAREQSEL_SRC(0)
+#define S3C2443_DMAREQSEL_SPI0RX S3C2443_DMAREQSEL_SRC(1)
+#define S3C2443_DMAREQSEL_SPI1TX S3C2443_DMAREQSEL_SRC(2)
+#define S3C2443_DMAREQSEL_SPI1RX S3C2443_DMAREQSEL_SRC(3)
+#define S3C2443_DMAREQSEL_I2STX S3C2443_DMAREQSEL_SRC(4)
+#define S3C2443_DMAREQSEL_I2SRX S3C2443_DMAREQSEL_SRC(5)
+#define S3C2443_DMAREQSEL_TIMER S3C2443_DMAREQSEL_SRC(9)
+#define S3C2443_DMAREQSEL_SDI S3C2443_DMAREQSEL_SRC(10)
+#define S3C2443_DMAREQSEL_XDREQ0 S3C2443_DMAREQSEL_SRC(17)
+#define S3C2443_DMAREQSEL_XDREQ1 S3C2443_DMAREQSEL_SRC(18)
+#define S3C2443_DMAREQSEL_UART0_0 S3C2443_DMAREQSEL_SRC(19)
+#define S3C2443_DMAREQSEL_UART0_1 S3C2443_DMAREQSEL_SRC(20)
+#define S3C2443_DMAREQSEL_UART1_0 S3C2443_DMAREQSEL_SRC(21)
+#define S3C2443_DMAREQSEL_UART1_1 S3C2443_DMAREQSEL_SRC(22)
+#define S3C2443_DMAREQSEL_UART2_0 S3C2443_DMAREQSEL_SRC(23)
+#define S3C2443_DMAREQSEL_UART2_1 S3C2443_DMAREQSEL_SRC(24)
+#define S3C2443_DMAREQSEL_UART3_0 S3C2443_DMAREQSEL_SRC(25)
+#define S3C2443_DMAREQSEL_UART3_1 S3C2443_DMAREQSEL_SRC(26)
+#define S3C2443_DMAREQSEL_PCMOUT S3C2443_DMAREQSEL_SRC(27)
+#define S3C2443_DMAREQSEL_PCMIN S3C2443_DMAREQSEL_SRC(28)
+#define S3C2443_DMAREQSEL_MICIN S3C2443_DMAREQSEL_SRC(29)
+#endif /* CONFIG_CPU_S3C2443 */
+
+#endif /* __ASM_PLAT_REGS_DMA_H */
--- /dev/null
+/* arch/arm/plat-samsung/include/plat/regs-iis.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ * http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 IIS register definition
+*/
+
+#ifndef __ASM_ARCH_REGS_IIS_H
+#define __ASM_ARCH_REGS_IIS_H
+
+#define S3C2410_IISCON (0x00)
+
+#define S3C2410_IISCON_LRINDEX (1 << 8)
+#define S3C2410_IISCON_TXFIFORDY (1 << 7)
+#define S3C2410_IISCON_RXFIFORDY (1 << 6)
+#define S3C2410_IISCON_TXDMAEN (1 << 5)
+#define S3C2410_IISCON_RXDMAEN (1 << 4)
+#define S3C2410_IISCON_TXIDLE (1 << 3)
+#define S3C2410_IISCON_RXIDLE (1 << 2)
+#define S3C2410_IISCON_PSCEN (1 << 1)
+#define S3C2410_IISCON_IISEN (1 << 0)
+
+#define S3C2410_IISMOD (0x04)
+
+#define S3C2440_IISMOD_MPLL (1 << 9)
+#define S3C2410_IISMOD_SLAVE (1 << 8)
+#define S3C2410_IISMOD_NOXFER (0 << 6)
+#define S3C2410_IISMOD_RXMODE (1 << 6)
+#define S3C2410_IISMOD_TXMODE (2 << 6)
+#define S3C2410_IISMOD_TXRXMODE (3 << 6)
+#define S3C2410_IISMOD_LR_LLOW (0 << 5)
+#define S3C2410_IISMOD_LR_RLOW (1 << 5)
+#define S3C2410_IISMOD_IIS (0 << 4)
+#define S3C2410_IISMOD_MSB (1 << 4)
+#define S3C2410_IISMOD_8BIT (0 << 3)
+#define S3C2410_IISMOD_16BIT (1 << 3)
+#define S3C2410_IISMOD_BITMASK (1 << 3)
+#define S3C2410_IISMOD_256FS (0 << 2)
+#define S3C2410_IISMOD_384FS (1 << 2)
+#define S3C2410_IISMOD_16FS (0 << 0)
+#define S3C2410_IISMOD_32FS (1 << 0)
+#define S3C2410_IISMOD_48FS (2 << 0)
+#define S3C2410_IISMOD_FS_MASK (3 << 0)
+
+#define S3C2410_IISPSR (0x08)
+
+#define S3C2410_IISPSR_INTMASK (31 << 5)
+#define S3C2410_IISPSR_INTSHIFT (5)
+#define S3C2410_IISPSR_EXTMASK (31 << 0)
+#define S3C2410_IISPSR_EXTSHFIT (0)
+
+#define S3C2410_IISFCON (0x0c)
+
+#define S3C2410_IISFCON_TXDMA (1 << 15)
+#define S3C2410_IISFCON_RXDMA (1 << 14)
+#define S3C2410_IISFCON_TXENABLE (1 << 13)
+#define S3C2410_IISFCON_RXENABLE (1 << 12)
+#define S3C2410_IISFCON_TXMASK (0x3f << 6)
+#define S3C2410_IISFCON_TXSHIFT (6)
+#define S3C2410_IISFCON_RXMASK (0x3f)
+#define S3C2410_IISFCON_RXSHIFT (0)
+
+#define S3C2410_IISFIFO (0x10)
+
+#endif /* __ASM_ARCH_REGS_IIS_H */
--- /dev/null
+/* arch/arm/plat-samsung/include/plat/regs-spi.h
+ *
+ * Copyright (c) 2004 Fetron GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 SPI register definition
+*/
+
+#ifndef __ASM_ARCH_REGS_SPI_H
+#define __ASM_ARCH_REGS_SPI_H
+
+#define S3C2410_SPI1 (0x20)
+#define S3C2412_SPI1 (0x100)
+
+#define S3C2410_SPCON (0x00)
+
+#define S3C2410_SPCON_SMOD_DMA (2 << 5) /* DMA mode */
+#define S3C2410_SPCON_SMOD_INT (1 << 5) /* interrupt mode */
+#define S3C2410_SPCON_SMOD_POLL (0 << 5) /* polling mode */
+#define S3C2410_SPCON_ENSCK (1 << 4) /* Enable SCK */
+#define S3C2410_SPCON_MSTR (1 << 3) /* Master:1, Slave:0 select */
+#define S3C2410_SPCON_CPOL_HIGH (1 << 2) /* Clock polarity select */
+#define S3C2410_SPCON_CPOL_LOW (0 << 2) /* Clock polarity select */
+
+#define S3C2410_SPCON_CPHA_FMTB (1 << 1) /* Clock Phase Select */
+#define S3C2410_SPCON_CPHA_FMTA (0 << 1) /* Clock Phase Select */
+
+#define S3C2410_SPSTA (0x04)
+
+#define S3C2410_SPSTA_DCOL (1 << 2) /* Data Collision Error */
+#define S3C2410_SPSTA_MULD (1 << 1) /* Multi Master Error */
+#define S3C2410_SPSTA_READY (1 << 0) /* Data Tx/Rx ready */
+#define S3C2412_SPSTA_READY_ORG (1 << 3)
+
+#define S3C2410_SPPIN (0x08)
+
+#define S3C2410_SPPIN_ENMUL (1 << 2) /* Multi Master Error detect */
+#define S3C2410_SPPIN_RESERVED (1 << 1)
+#define S3C2410_SPPIN_KEEP (1 << 0) /* Master Out keep */
+
+#define S3C2410_SPPRE (0x0C)
+#define S3C2410_SPTDAT (0x10)
+#define S3C2410_SPRDAT (0x14)
+
+#endif /* __ASM_ARCH_REGS_SPI_H */
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/regs-srom.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5P SROMC register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_SAMSUNG_REGS_SROM_H
+#define __PLAT_SAMSUNG_REGS_SROM_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_SROMREG(x) (S5P_VA_SROMC + (x))
+
+#define S5P_SROM_BW S5P_SROMREG(0x0)
+#define S5P_SROM_BC0 S5P_SROMREG(0x4)
+#define S5P_SROM_BC1 S5P_SROMREG(0x8)
+#define S5P_SROM_BC2 S5P_SROMREG(0xc)
+#define S5P_SROM_BC3 S5P_SROMREG(0x10)
+#define S5P_SROM_BC4 S5P_SROMREG(0x14)
+#define S5P_SROM_BC5 S5P_SROMREG(0x18)
+
+/* one register BW holds 4 x 4-bit packed settings for NCS0 - NCS3 */
+
+#define S5P_SROM_BW__DATAWIDTH__SHIFT 0
+#define S5P_SROM_BW__ADDRMODE__SHIFT 1
+#define S5P_SROM_BW__WAITENABLE__SHIFT 2
+#define S5P_SROM_BW__BYTEENABLE__SHIFT 3
+
+#define S5P_SROM_BW__CS_MASK 0xf
+
+#define S5P_SROM_BW__NCS0__SHIFT 0
+#define S5P_SROM_BW__NCS1__SHIFT 4
+#define S5P_SROM_BW__NCS2__SHIFT 8
+#define S5P_SROM_BW__NCS3__SHIFT 12
+#define S5P_SROM_BW__NCS4__SHIFT 16
+#define S5P_SROM_BW__NCS5__SHIFT 20
+
+/* applies to same to BCS0 - BCS3 */
+
+#define S5P_SROM_BCX__PMC__SHIFT 0
+#define S5P_SROM_BCX__TACP__SHIFT 4
+#define S5P_SROM_BCX__TCAH__SHIFT 8
+#define S5P_SROM_BCX__TCOH__SHIFT 12
+#define S5P_SROM_BCX__TACC__SHIFT 16
+#define S5P_SROM_BCX__TCOS__SHIFT 24
+#define S5P_SROM_BCX__TACS__SHIFT 28
+
+#endif /* __PLAT_SAMSUNG_REGS_SROM_H */
--- /dev/null
+/* arch/arm/plat-samsung/include/plat/regs-udc.h
+ *
+ * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at>
+ *
+ * This include file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+*/
+
+#ifndef __ASM_ARCH_REGS_UDC_H
+#define __ASM_ARCH_REGS_UDC_H
+
+#define S3C2410_USBDREG(x) (x)
+
+#define S3C2410_UDC_FUNC_ADDR_REG S3C2410_USBDREG(0x0140)
+#define S3C2410_UDC_PWR_REG S3C2410_USBDREG(0x0144)
+#define S3C2410_UDC_EP_INT_REG S3C2410_USBDREG(0x0148)
+
+#define S3C2410_UDC_USB_INT_REG S3C2410_USBDREG(0x0158)
+#define S3C2410_UDC_EP_INT_EN_REG S3C2410_USBDREG(0x015c)
+
+#define S3C2410_UDC_USB_INT_EN_REG S3C2410_USBDREG(0x016c)
+
+#define S3C2410_UDC_FRAME_NUM1_REG S3C2410_USBDREG(0x0170)
+#define S3C2410_UDC_FRAME_NUM2_REG S3C2410_USBDREG(0x0174)
+
+#define S3C2410_UDC_EP0_FIFO_REG S3C2410_USBDREG(0x01c0)
+#define S3C2410_UDC_EP1_FIFO_REG S3C2410_USBDREG(0x01c4)
+#define S3C2410_UDC_EP2_FIFO_REG S3C2410_USBDREG(0x01c8)
+#define S3C2410_UDC_EP3_FIFO_REG S3C2410_USBDREG(0x01cc)
+#define S3C2410_UDC_EP4_FIFO_REG S3C2410_USBDREG(0x01d0)
+
+#define S3C2410_UDC_EP1_DMA_CON S3C2410_USBDREG(0x0200)
+#define S3C2410_UDC_EP1_DMA_UNIT S3C2410_USBDREG(0x0204)
+#define S3C2410_UDC_EP1_DMA_FIFO S3C2410_USBDREG(0x0208)
+#define S3C2410_UDC_EP1_DMA_TTC_L S3C2410_USBDREG(0x020c)
+#define S3C2410_UDC_EP1_DMA_TTC_M S3C2410_USBDREG(0x0210)
+#define S3C2410_UDC_EP1_DMA_TTC_H S3C2410_USBDREG(0x0214)
+
+#define S3C2410_UDC_EP2_DMA_CON S3C2410_USBDREG(0x0218)
+#define S3C2410_UDC_EP2_DMA_UNIT S3C2410_USBDREG(0x021c)
+#define S3C2410_UDC_EP2_DMA_FIFO S3C2410_USBDREG(0x0220)
+#define S3C2410_UDC_EP2_DMA_TTC_L S3C2410_USBDREG(0x0224)
+#define S3C2410_UDC_EP2_DMA_TTC_M S3C2410_USBDREG(0x0228)
+#define S3C2410_UDC_EP2_DMA_TTC_H S3C2410_USBDREG(0x022c)
+
+#define S3C2410_UDC_EP3_DMA_CON S3C2410_USBDREG(0x0240)
+#define S3C2410_UDC_EP3_DMA_UNIT S3C2410_USBDREG(0x0244)
+#define S3C2410_UDC_EP3_DMA_FIFO S3C2410_USBDREG(0x0248)
+#define S3C2410_UDC_EP3_DMA_TTC_L S3C2410_USBDREG(0x024c)
+#define S3C2410_UDC_EP3_DMA_TTC_M S3C2410_USBDREG(0x0250)
+#define S3C2410_UDC_EP3_DMA_TTC_H S3C2410_USBDREG(0x0254)
+
+#define S3C2410_UDC_EP4_DMA_CON S3C2410_USBDREG(0x0258)
+#define S3C2410_UDC_EP4_DMA_UNIT S3C2410_USBDREG(0x025c)
+#define S3C2410_UDC_EP4_DMA_FIFO S3C2410_USBDREG(0x0260)
+#define S3C2410_UDC_EP4_DMA_TTC_L S3C2410_USBDREG(0x0264)
+#define S3C2410_UDC_EP4_DMA_TTC_M S3C2410_USBDREG(0x0268)
+#define S3C2410_UDC_EP4_DMA_TTC_H S3C2410_USBDREG(0x026c)
+
+#define S3C2410_UDC_INDEX_REG S3C2410_USBDREG(0x0178)
+
+/* indexed registers */
+
+#define S3C2410_UDC_MAXP_REG S3C2410_USBDREG(0x0180)
+
+#define S3C2410_UDC_EP0_CSR_REG S3C2410_USBDREG(0x0184)
+
+#define S3C2410_UDC_IN_CSR1_REG S3C2410_USBDREG(0x0184)
+#define S3C2410_UDC_IN_CSR2_REG S3C2410_USBDREG(0x0188)
+
+#define S3C2410_UDC_OUT_CSR1_REG S3C2410_USBDREG(0x0190)
+#define S3C2410_UDC_OUT_CSR2_REG S3C2410_USBDREG(0x0194)
+#define S3C2410_UDC_OUT_FIFO_CNT1_REG S3C2410_USBDREG(0x0198)
+#define S3C2410_UDC_OUT_FIFO_CNT2_REG S3C2410_USBDREG(0x019c)
+
+#define S3C2410_UDC_FUNCADDR_UPDATE (1 << 7)
+
+#define S3C2410_UDC_PWR_ISOUP (1 << 7) /* R/W */
+#define S3C2410_UDC_PWR_RESET (1 << 3) /* R */
+#define S3C2410_UDC_PWR_RESUME (1 << 2) /* R/W */
+#define S3C2410_UDC_PWR_SUSPEND (1 << 1) /* R */
+#define S3C2410_UDC_PWR_ENSUSPEND (1 << 0) /* R/W */
+
+#define S3C2410_UDC_PWR_DEFAULT (0x00)
+
+#define S3C2410_UDC_INT_EP4 (1 << 4) /* R/W (clear only) */
+#define S3C2410_UDC_INT_EP3 (1 << 3) /* R/W (clear only) */
+#define S3C2410_UDC_INT_EP2 (1 << 2) /* R/W (clear only) */
+#define S3C2410_UDC_INT_EP1 (1 << 1) /* R/W (clear only) */
+#define S3C2410_UDC_INT_EP0 (1 << 0) /* R/W (clear only) */
+
+#define S3C2410_UDC_USBINT_RESET (1 << 2) /* R/W (clear only) */
+#define S3C2410_UDC_USBINT_RESUME (1 << 1) /* R/W (clear only) */
+#define S3C2410_UDC_USBINT_SUSPEND (1 << 0) /* R/W (clear only) */
+
+#define S3C2410_UDC_INTE_EP4 (1 << 4) /* R/W */
+#define S3C2410_UDC_INTE_EP3 (1 << 3) /* R/W */
+#define S3C2410_UDC_INTE_EP2 (1 << 2) /* R/W */
+#define S3C2410_UDC_INTE_EP1 (1 << 1) /* R/W */
+#define S3C2410_UDC_INTE_EP0 (1 << 0) /* R/W */
+
+#define S3C2410_UDC_USBINTE_RESET (1 << 2) /* R/W */
+#define S3C2410_UDC_USBINTE_SUSPEND (1 << 0) /* R/W */
+
+#define S3C2410_UDC_INDEX_EP0 (0x00)
+#define S3C2410_UDC_INDEX_EP1 (0x01)
+#define S3C2410_UDC_INDEX_EP2 (0x02)
+#define S3C2410_UDC_INDEX_EP3 (0x03)
+#define S3C2410_UDC_INDEX_EP4 (0x04)
+
+#define S3C2410_UDC_ICSR1_CLRDT (1 << 6) /* R/W */
+#define S3C2410_UDC_ICSR1_SENTSTL (1 << 5) /* R/W (clear only) */
+#define S3C2410_UDC_ICSR1_SENDSTL (1 << 4) /* R/W */
+#define S3C2410_UDC_ICSR1_FFLUSH (1 << 3) /* W (set only) */
+#define S3C2410_UDC_ICSR1_UNDRUN (1 << 2) /* R/W (clear only) */
+#define S3C2410_UDC_ICSR1_PKTRDY (1 << 0) /* R/W (set only) */
+
+#define S3C2410_UDC_ICSR2_AUTOSET (1 << 7) /* R/W */
+#define S3C2410_UDC_ICSR2_ISO (1 << 6) /* R/W */
+#define S3C2410_UDC_ICSR2_MODEIN (1 << 5) /* R/W */
+#define S3C2410_UDC_ICSR2_DMAIEN (1 << 4) /* R/W */
+
+#define S3C2410_UDC_OCSR1_CLRDT (1 << 7) /* R/W */
+#define S3C2410_UDC_OCSR1_SENTSTL (1 << 6) /* R/W (clear only) */
+#define S3C2410_UDC_OCSR1_SENDSTL (1 << 5) /* R/W */
+#define S3C2410_UDC_OCSR1_FFLUSH (1 << 4) /* R/W */
+#define S3C2410_UDC_OCSR1_DERROR (1 << 3) /* R */
+#define S3C2410_UDC_OCSR1_OVRRUN (1 << 2) /* R/W (clear only) */
+#define S3C2410_UDC_OCSR1_PKTRDY (1 << 0) /* R/W (clear only) */
+
+#define S3C2410_UDC_OCSR2_AUTOCLR (1 << 7) /* R/W */
+#define S3C2410_UDC_OCSR2_ISO (1 << 6) /* R/W */
+#define S3C2410_UDC_OCSR2_DMAIEN (1 << 5) /* R/W */
+
+#define S3C2410_UDC_EP0_CSR_OPKRDY (1 << 0)
+#define S3C2410_UDC_EP0_CSR_IPKRDY (1 << 1)
+#define S3C2410_UDC_EP0_CSR_SENTSTL (1 << 2)
+#define S3C2410_UDC_EP0_CSR_DE (1 << 3)
+#define S3C2410_UDC_EP0_CSR_SE (1 << 4)
+#define S3C2410_UDC_EP0_CSR_SENDSTL (1 << 5)
+#define S3C2410_UDC_EP0_CSR_SOPKTRDY (1 << 6)
+#define S3C2410_UDC_EP0_CSR_SSE (1 << 7)
+
+#define S3C2410_UDC_MAXP_8 (1 << 0)
+#define S3C2410_UDC_MAXP_16 (1 << 1)
+#define S3C2410_UDC_MAXP_32 (1 << 2)
+#define S3C2410_UDC_MAXP_64 (1 << 3)
+
+#endif
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/reset.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_SAMSUNG_RESET_H
+#define __PLAT_SAMSUNG_RESET_H __FILE__
+
+extern void (*s5p_reset_hook)(void);
+
+#endif /* __PLAT_SAMSUNG_RESET_H */
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/s3c2410.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2410 machine directory
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#ifdef CONFIG_CPU_S3C2410
+
+extern int s3c2410_init(void);
+extern int s3c2410a_init(void);
+
+extern void s3c2410_map_io(void);
+
+extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2410_init_clocks(int xtal);
+
+#else
+#define s3c2410_init_clocks NULL
+#define s3c2410_init_uarts NULL
+#define s3c2410_map_io NULL
+#define s3c2410_init NULL
+#define s3c2410a_init NULL
+#endif
+
+extern int s3c2410_baseclk_add(void);
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/s3c2412.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2412 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C2412
+
+extern int s3c2412_init(void);
+
+extern void s3c2412_map_io(void);
+
+extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2412_init_clocks(int xtal);
+
+extern int s3c2412_baseclk_add(void);
+#else
+#define s3c2412_init_clocks NULL
+#define s3c2412_init_uarts NULL
+#define s3c2412_map_io NULL
+#define s3c2412_init NULL
+#endif
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/s3c2416.h
+ *
+ * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>
+ *
+ * Header file for s3c2416 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C2416
+
+struct s3c2410_uartcfg;
+
+extern int s3c2416_init(void);
+
+extern void s3c2416_map_io(void);
+
+extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2416_init_clocks(int xtal);
+
+extern int s3c2416_baseclk_add(void);
+
+#else
+#define s3c2416_init_clocks NULL
+#define s3c2416_init_uarts NULL
+#define s3c2416_map_io NULL
+#define s3c2416_init NULL
+#endif
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/s3c2443.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2443 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C2443
+
+struct s3c2410_uartcfg;
+
+extern int s3c2443_init(void);
+
+extern void s3c2443_map_io(void);
+
+extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2443_init_clocks(int xtal);
+
+extern int s3c2443_baseclk_add(void);
+
+#else
+#define s3c2443_init_clocks NULL
+#define s3c2443_init_uarts NULL
+#define s3c2443_map_io NULL
+#define s3c2443_init NULL
+#endif
+
+/* common code used by s3c2443 and others.
+ * note, not to be used outside of arch/arm/mach-s3c* */
+
+struct clk; /* some files don't need clk.h otherwise */
+
+typedef unsigned int (*pll_fn)(unsigned int reg, unsigned int base);
+
+extern void s3c2443_common_setup_clocks(pll_fn get_mpll);
+extern void s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
+ unsigned int *divs, int nr_divs,
+ int divmask);
+
+extern int s3c2443_clkcon_enable_h(struct clk *clk, int enable);
+extern int s3c2443_clkcon_enable_p(struct clk *clk, int enable);
+extern int s3c2443_clkcon_enable_s(struct clk *clk, int enable);
+
+extern struct clksrc_clk clk_epllref;
+extern struct clksrc_clk clk_esysclk;
+extern struct clksrc_clk clk_msysclk;
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/s3c244x.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C2440 and S3C2442 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
+
+extern void s3c244x_map_io(void);
+
+extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c244x_init_clocks(int xtal);
+
+#else
+#define s3c244x_init_clocks NULL
+#define s3c244x_init_uarts NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2440
+extern int s3c2440_init(void);
+
+extern void s3c2440_map_io(void);
+#else
+#define s3c2440_init NULL
+#define s3c2440_map_io NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2442
+extern int s3c2442_init(void);
+
+extern void s3c2442_map_io(void);
+#else
+#define s3c2442_init NULL
+#define s3c2442_map_io NULL
+#endif
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/s3c6400.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * Header file for s3c6400 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S3C6400 related SoCs */
+
+extern void s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c6400_setup_clocks(void);
+
+extern void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit);
+
+#ifdef CONFIG_CPU_S3C6400
+
+extern int s3c6400_init(void);
+extern void s3c6400_init_irq(void);
+extern void s3c6400_map_io(void);
+extern void s3c6400_init_clocks(int xtal);
+
+#define s3c6400_init_uarts s3c6400_common_init_uarts
+
+#else
+#define s3c6400_init_clocks NULL
+#define s3c6400_init_uarts NULL
+#define s3c6400_map_io NULL
+#define s3c6400_init NULL
+#endif
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/s3c6410.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * Header file for s3c6410 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C6410
+
+extern int s3c6410_init(void);
+extern void s3c6410_init_irq(void);
+extern void s3c6410_map_io(void);
+extern void s3c6410_init_clocks(int xtal);
+
+#define s3c6410_init_uarts s3c6400_common_init_uarts
+
+#else
+#define s3c6410_init_clocks NULL
+#define s3c6410_init_uarts NULL
+#define s3c6410_map_io NULL
+#define s3c6410_init NULL
+#endif
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/s5p-clock.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Header file for s5p clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_S5P_CLOCK_H
+#define __ASM_PLAT_S5P_CLOCK_H __FILE__
+
+#include <linux/clk.h>
+
+#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
+
+#define clk_fin_apll clk_ext_xtal_mux
+#define clk_fin_mpll clk_ext_xtal_mux
+#define clk_fin_epll clk_ext_xtal_mux
+#define clk_fin_dpll clk_ext_xtal_mux
+#define clk_fin_vpll clk_ext_xtal_mux
+#define clk_fin_hpll clk_ext_xtal_mux
+
+extern struct clk clk_ext_xtal_mux;
+extern struct clk clk_xusbxti;
+extern struct clk clk_48m;
+extern struct clk s5p_clk_27m;
+extern struct clk clk_fout_apll;
+extern struct clk clk_fout_mpll;
+extern struct clk clk_fout_epll;
+extern struct clk clk_fout_dpll;
+extern struct clk clk_fout_vpll;
+extern struct clk clk_arm;
+extern struct clk clk_vpll;
+
+extern struct clksrc_sources clk_src_apll;
+extern struct clksrc_sources clk_src_mpll;
+extern struct clksrc_sources clk_src_epll;
+extern struct clksrc_sources clk_src_dpll;
+
+extern int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable);
+
+/* Common EPLL operations for S5P platform */
+extern int s5p_epll_enable(struct clk *clk, int enable);
+extern unsigned long s5p_epll_get_rate(struct clk *clk);
+
+/* SPDIF clk operations common for S5PC100/V210/C110 and Exynos4 */
+extern int s5p_spdif_set_rate(struct clk *clk, unsigned long rate);
+extern unsigned long s5p_spdif_get_rate(struct clk *clk);
+
+extern struct clk_ops s5p_sclk_spdif_ops;
+#endif /* __ASM_PLAT_S5P_CLOCK_H */
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/s5p-time.h
+ *
+ * Copyright 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Header file for s5p time support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_S5P_TIME_H
+#define __ASM_PLAT_S5P_TIME_H __FILE__
+
+/* S5P HR-Timer Clock mode */
+enum s5p_timer_mode {
+ S5P_PWM0,
+ S5P_PWM1,
+ S5P_PWM2,
+ S5P_PWM3,
+ S5P_PWM4,
+};
+
+struct s5p_timer_source {
+ unsigned int event_id;
+ unsigned int source_id;
+};
+
+/* Be able to sleep for atleast 4 seconds (usually more) */
+#define S5PTIMER_MIN_RANGE 4
+
+#define TCNT_MAX 0xffffffff
+#define NON_PERIODIC 0
+#define PERIODIC 1
+
+extern void __init s5p_set_timer_source(enum s5p_timer_mode event,
+ enum s5p_timer_mode source);
+extern struct sys_timer s5p_timer;
+#endif /* __ASM_PLAT_S5P_TIME_H */
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/s5p6440.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Header file for s5p6440 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+ /* Common init code for S5P6440 related SoCs */
+
+extern void s5p6440_register_clocks(void);
+extern void s5p6440_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S5P6440
+
+extern int s5p64x0_init(void);
+extern void s5p6440_init_irq(void);
+extern void s5p6440_map_io(void);
+extern void s5p6440_init_clocks(int xtal);
+
+extern void s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+#else
+#define s5p6440_init_clocks NULL
+#define s5p6440_init_uarts NULL
+#define s5p6440_map_io NULL
+#define s5p64x0_init NULL
+#endif
+
+/* S5P6440 timer */
+
+extern struct sys_timer s5p6440_timer;
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/s5p6450.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Header file for s5p6450 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5P6450 related SoCs */
+
+extern void s5p6450_register_clocks(void);
+extern void s5p6450_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S5P6450
+
+extern int s5p64x0_init(void);
+extern void s5p6450_init_irq(void);
+extern void s5p6450_map_io(void);
+extern void s5p6450_init_clocks(int xtal);
+
+extern void s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+#else
+#define s5p6450_init_clocks NULL
+#define s5p6450_init_uarts NULL
+#define s5p6450_map_io NULL
+#define s5p64x0_init NULL
+#endif
+
+/* S5P6450 timer */
+
+extern struct sys_timer s5p6450_timer;
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/s5pc100.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Header file for s5pc100 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5PC100 related SoCs */
+
+extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5pc100_register_clocks(void);
+extern void s5pc100_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S5PC100
+
+extern int s5pc100_init(void);
+extern void s5pc100_init_irq(void);
+extern void s5pc100_map_io(void);
+extern void s5pc100_init_clocks(int xtal);
+
+#define s5pc100_init_uarts s5pc100_common_init_uarts
+
+#else
+#define s5pc100_init_clocks NULL
+#define s5pc100_init_uarts NULL
+#define s5pc100_map_io NULL
+#define s5pc100_init NULL
+#endif
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/s5pv210.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Header file for s5pv210 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5PV210 related SoCs */
+
+extern void s5pv210_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5pv210_register_clocks(void);
+extern void s5pv210_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S5PV210
+
+extern int s5pv210_init(void);
+extern void s5pv210_init_irq(void);
+extern void s5pv210_map_io(void);
+extern void s5pv210_init_clocks(int xtal);
+
+#define s5pv210_init_uarts s5pv210_common_init_uarts
+
+#else
+#define s5pv210_init_clocks NULL
+#define s5pv210_init_uarts NULL
+#define s5pv210_map_io NULL
+#define s5pv210_init NULL
+#endif
* cd_type == S3C_SDHCI_CD_GPIO
* @ext_cd_gpio_invert: invert values for external CD gpio line
* @cfg_gpio: Configure the GPIO for a specific card bit-width
- * @cfg_card: Configure the interface for a specific card and speed. This
- * is necessary the controllers and/or GPIO blocks require the
- * changing of driver-strength and other controls dependent on
- * the card and speed of operation.
*
* Initialisation data specific to either the machine or the platform
* for the device driver to use or call-back when configuring gpio or
int state));
void (*cfg_gpio)(struct platform_device *dev, int width);
- void (*cfg_card)(struct platform_device *dev,
- void __iomem *regbase,
- struct mmc_ios *ios,
- struct mmc_card *card);
};
/* s3c_sdhci_set_platdata() - common helper for setting SDHCI platform data
#ifdef CONFIG_S3C2416_SETUP_SDHCI
extern char *s3c2416_hsmmc_clksrcs[4];
-extern void s3c2416_setup_sdhci_cfg_card(struct platform_device *dev,
- void __iomem *r,
- struct mmc_ios *ios,
- struct mmc_card *card);
-
static inline void s3c2416_default_sdhci0(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC
s3c_hsmmc0_def_platdata.clocks = s3c2416_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s3c2416_setup_sdhci0_cfg_gpio;
- s3c_hsmmc0_def_platdata.cfg_card = s3c2416_setup_sdhci_cfg_card;
#endif /* CONFIG_S3C_DEV_HSMMC */
}
#ifdef CONFIG_S3C_DEV_HSMMC1
s3c_hsmmc1_def_platdata.clocks = s3c2416_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s3c2416_setup_sdhci1_cfg_gpio;
- s3c_hsmmc1_def_platdata.cfg_card = s3c2416_setup_sdhci_cfg_card;
#endif /* CONFIG_S3C_DEV_HSMMC1 */
}
#ifdef CONFIG_S3C64XX_SETUP_SDHCI
extern char *s3c64xx_hsmmc_clksrcs[4];
-extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
- void __iomem *r,
- struct mmc_ios *ios,
- struct mmc_card *card);
-
static inline void s3c6400_default_sdhci0(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC
s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
- s3c_hsmmc0_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
#endif
}
#ifdef CONFIG_S3C_DEV_HSMMC1
s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
- s3c_hsmmc1_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
#endif
}
#ifdef CONFIG_S3C_DEV_HSMMC2
s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
- s3c_hsmmc2_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
#endif
}
-extern void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev,
- void __iomem *r,
- struct mmc_ios *ios,
- struct mmc_card *card);
-
static inline void s3c6410_default_sdhci0(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC
s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
- s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
#endif
}
#ifdef CONFIG_S3C_DEV_HSMMC1
s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
- s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
#endif
}
#ifdef CONFIG_S3C_DEV_HSMMC2
s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
- s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
#endif
}
#ifdef CONFIG_S5PC100_SETUP_SDHCI
extern char *s5pc100_hsmmc_clksrcs[4];
-extern void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
- void __iomem *r,
- struct mmc_ios *ios,
- struct mmc_card *card);
-
static inline void s5pc100_default_sdhci0(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC
s3c_hsmmc0_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio;
- s3c_hsmmc0_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
#endif
}
#ifdef CONFIG_S3C_DEV_HSMMC1
s3c_hsmmc1_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio;
- s3c_hsmmc1_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
#endif
}
#ifdef CONFIG_S3C_DEV_HSMMC2
s3c_hsmmc2_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio;
- s3c_hsmmc2_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
#endif
}
#ifdef CONFIG_S5PV210_SETUP_SDHCI
extern char *s5pv210_hsmmc_clksrcs[4];
-extern void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
- void __iomem *r,
- struct mmc_ios *ios,
- struct mmc_card *card);
-
static inline void s5pv210_default_sdhci0(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC
s3c_hsmmc0_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s5pv210_setup_sdhci0_cfg_gpio;
- s3c_hsmmc0_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
#endif
}
#ifdef CONFIG_S3C_DEV_HSMMC1
s3c_hsmmc1_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s5pv210_setup_sdhci1_cfg_gpio;
- s3c_hsmmc1_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
#endif
}
#ifdef CONFIG_S3C_DEV_HSMMC2
s3c_hsmmc2_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s5pv210_setup_sdhci2_cfg_gpio;
- s3c_hsmmc2_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
#endif
}
#ifdef CONFIG_S3C_DEV_HSMMC3
s3c_hsmmc3_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio;
- s3c_hsmmc3_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
#endif
}
#ifdef CONFIG_EXYNOS4_SETUP_SDHCI
extern char *exynos4_hsmmc_clksrcs[4];
-extern void exynos4_setup_sdhci_cfg_card(struct platform_device *dev,
- void __iomem *r,
- struct mmc_ios *ios,
- struct mmc_card *card);
-
static inline void exynos4_default_sdhci0(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC
s3c_hsmmc0_def_platdata.clocks = exynos4_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = exynos4_setup_sdhci0_cfg_gpio;
- s3c_hsmmc0_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card;
#endif
}
#ifdef CONFIG_S3C_DEV_HSMMC1
s3c_hsmmc1_def_platdata.clocks = exynos4_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = exynos4_setup_sdhci1_cfg_gpio;
- s3c_hsmmc1_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card;
#endif
}
#ifdef CONFIG_S3C_DEV_HSMMC2
s3c_hsmmc2_def_platdata.clocks = exynos4_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = exynos4_setup_sdhci2_cfg_gpio;
- s3c_hsmmc2_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card;
#endif
}
#ifdef CONFIG_S3C_DEV_HSMMC3
s3c_hsmmc3_def_platdata.clocks = exynos4_hsmmc_clksrcs;
s3c_hsmmc3_def_platdata.cfg_gpio = exynos4_setup_sdhci3_cfg_gpio;
- s3c_hsmmc3_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card;
#endif
}
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/sysmmu.h
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Samsung System MMU driver for S5P platform
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_SAMSUNG_SYSMMU_H
+#define __PLAT_SAMSUNG_SYSMMU_H __FILE__
+
+enum S5P_SYSMMU_INTERRUPT_TYPE {
+ SYSMMU_PAGEFAULT,
+ SYSMMU_AR_MULTIHIT,
+ SYSMMU_AW_MULTIHIT,
+ SYSMMU_BUSERROR,
+ SYSMMU_AR_SECURITY,
+ SYSMMU_AR_ACCESS,
+ SYSMMU_AW_SECURITY,
+ SYSMMU_AW_PROTECTION, /* 7 */
+ SYSMMU_FAULTS_NUM
+};
+
+#ifdef CONFIG_S5P_SYSTEM_MMU
+
+#include <mach/sysmmu.h>
+
+/**
+ * s5p_sysmmu_enable() - enable system mmu of ip
+ * @ips: The ip connected system mmu.
+ * #pgd: Base physical address of the 1st level page table
+ *
+ * This function enable system mmu to transfer address
+ * from virtual address to physical address
+ */
+void s5p_sysmmu_enable(sysmmu_ips ips, unsigned long pgd);
+
+/**
+ * s5p_sysmmu_disable() - disable sysmmu mmu of ip
+ * @ips: The ip connected system mmu.
+ *
+ * This function disable system mmu to transfer address
+ * from virtual address to physical address
+ */
+void s5p_sysmmu_disable(sysmmu_ips ips);
+
+/**
+ * s5p_sysmmu_set_tablebase_pgd() - set page table base address to refer page table
+ * @ips: The ip connected system mmu.
+ * @pgd: The page table base address.
+ *
+ * This function set page table base address
+ * When system mmu transfer address from virtaul address to physical address,
+ * system mmu refer address information from page table
+ */
+void s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd);
+
+/**
+ * s5p_sysmmu_tlb_invalidate() - flush all TLB entry in system mmu
+ * @ips: The ip connected system mmu.
+ *
+ * This function flush all TLB entry in system mmu
+ */
+void s5p_sysmmu_tlb_invalidate(sysmmu_ips ips);
+
+/** s5p_sysmmu_set_fault_handler() - Fault handler for System MMUs
+ * @itype: type of fault.
+ * @pgtable_base: the physical address of page table base. This is 0 if @ips is
+ * SYSMMU_BUSERROR.
+ * @fault_addr: the device (virtual) address that the System MMU tried to
+ * translated. This is 0 if @ips is SYSMMU_BUSERROR.
+ * Called when interrupt occurred by the System MMUs
+ * The device drivers of peripheral devices that has a System MMU can implement
+ * a fault handler to resolve address translation fault by System MMU.
+ * The meanings of return value and parameters are described below.
+
+ * return value: non-zero if the fault is correctly resolved.
+ * zero if the fault is not handled.
+ */
+void s5p_sysmmu_set_fault_handler(sysmmu_ips ips,
+ int (*handler)(enum S5P_SYSMMU_INTERRUPT_TYPE itype,
+ unsigned long pgtable_base,
+ unsigned long fault_addr));
+#else
+#define s5p_sysmmu_enable(ips, pgd) do { } while (0)
+#define s5p_sysmmu_disable(ips) do { } while (0)
+#define s5p_sysmmu_set_tablebase_pgd(ips, pgd) do { } while (0)
+#define s5p_sysmmu_tlb_invalidate(ips) do { } while (0)
+#define s5p_sysmmu_set_fault_handler(ips, handler) do { } while (0)
+#endif
+#endif /* __ASM_PLAT_SYSMMU_H */
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/system-reset.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/system-reset.h
+ *
+ * S5P - System define for arch_reset()
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/watchdog-reset.h>
+
+void (*s5p_reset_hook)(void);
+
+static void arch_reset(char mode, const char *cmd)
+{
+ /* SWRESET support in s5p_reset_hook() */
+
+ if (s5p_reset_hook)
+ s5p_reset_hook();
+
+ /* Perform reset using Watchdog reset
+ * if there is no s5p_reset_hook()
+ */
+
+ arch_wdt_reset();
+}
--- /dev/null
+/*
+ * arch/arm/plat-samsung/include/plat/tv.h
+ *
+ * Copyright 2011 Samsung Electronics Co., Ltd.
+ * Tomasz Stanislawski <t.stanislaws@samsung.com>
+ *
+ * Samsung TV driver core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SAMSUNG_PLAT_TV_H
+#define __SAMSUNG_PLAT_TV_H __FILE__
+
+/*
+ * These functions are only for use with the core support code, such as
+ * the CPU-specific initialization code.
+ */
+
+/* Re-define device name to differentiate the subsystem in various SoCs. */
+static inline void s5p_hdmi_setname(char *name)
+{
+#ifdef CONFIG_S5P_DEV_TV
+ s5p_device_hdmi.name = name;
+#endif
+}
+
+static inline void s5p_mixer_setname(char *name)
+{
+#ifdef CONFIG_S5P_DEV_TV
+ s5p_device_mixer.name = name;
+#endif
+}
+
+static inline void s5p_sdo_setname(char *name)
+{
+#ifdef CONFIG_S5P_DEV_TV
+ s5p_device_sdo.name = name;
+#endif
+}
+
+#endif /* __SAMSUNG_PLAT_TV_H */
--- /dev/null
+/* arch/arm/plat-samsung/include/plat/udc.h
+ *
+ * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *
+ * Changelog:
+ * 14-Mar-2005 RTP Created file
+ * 02-Aug-2005 RTP File rename
+ * 07-Sep-2005 BJD Minor cleanups, changed cmd to enum
+ * 18-Jan-2007 HMW Add per-platform vbus_draw function
+*/
+
+#ifndef __ASM_ARM_ARCH_UDC_H
+#define __ASM_ARM_ARCH_UDC_H
+
+enum s3c2410_udc_cmd_e {
+ S3C2410_UDC_P_ENABLE = 1, /* Pull-up enable */
+ S3C2410_UDC_P_DISABLE = 2, /* Pull-up disable */
+ S3C2410_UDC_P_RESET = 3, /* UDC reset, in case of */
+};
+
+struct s3c2410_udc_mach_info {
+ void (*udc_command)(enum s3c2410_udc_cmd_e);
+ void (*vbus_draw)(unsigned int ma);
+
+ unsigned int pullup_pin;
+ unsigned int pullup_pin_inverted;
+
+ unsigned int vbus_pin;
+ unsigned char vbus_pin_inverted;
+};
+
+extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *);
+
+/**
+ * s3c24xx_hsudc_platdata - Platform data for USB High-Speed gadget controller.
+ * @epnum: Number of endpoints to be instantiated by the controller driver.
+ * @gpio_init: Platform specific USB related GPIO initialization.
+ * @gpio_uninit: Platform specific USB releted GPIO uninitialzation.
+ *
+ * Representation of platform data for the S3C24XX USB 2.0 High Speed gadget
+ * controllers.
+ */
+struct s3c24xx_hsudc_platdata {
+ unsigned int epnum;
+ void (*gpio_init)(void);
+ void (*gpio_uninit)(void);
+};
+
+extern void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd);
+
+#endif /* __ASM_ARM_ARCH_UDC_H */
--- /dev/null
+/*
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PLAT_SAMSUNG_USB_PHY_H
+#define __PLAT_SAMSUNG_USB_PHY_H __FILE__
+
+enum s5p_usb_phy_type {
+ S5P_USB_PHY_DEVICE,
+ S5P_USB_PHY_HOST,
+};
+
+extern int s5p_usb_phy_init(struct platform_device *pdev, int type);
+extern int s5p_usb_phy_exit(struct platform_device *pdev, int type);
+
+#endif /* __PLAT_SAMSUNG_USB_PHY_H */
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include <linux/platform_device.h>
set->max_width = pd->max_width;
if (pd->cfg_gpio)
set->cfg_gpio = pd->cfg_gpio;
- if (pd->cfg_card)
- set->cfg_card = pd->cfg_card;
if (pd->host_caps)
set->host_caps |= pd->host_caps;
if (pd->clk_type)
#define OFFS_DAT (0x04)
#define OFFS_UP (0x08)
-static void s3c_gpio_pm_1bit_save(struct s3c_gpio_chip *chip)
+static void samsung_gpio_pm_1bit_save(struct samsung_gpio_chip *chip)
{
chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
}
-static void s3c_gpio_pm_1bit_resume(struct s3c_gpio_chip *chip)
+static void samsung_gpio_pm_1bit_resume(struct samsung_gpio_chip *chip)
{
void __iomem *base = chip->base;
u32 old_gpcon = __raw_readl(base + OFFS_CON);
chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
}
-struct s3c_gpio_pm s3c_gpio_pm_1bit = {
- .save = s3c_gpio_pm_1bit_save,
- .resume = s3c_gpio_pm_1bit_resume,
+struct samsung_gpio_pm samsung_gpio_pm_1bit = {
+ .save = samsung_gpio_pm_1bit_save,
+ .resume = samsung_gpio_pm_1bit_resume,
};
-static void s3c_gpio_pm_2bit_save(struct s3c_gpio_chip *chip)
+static void samsung_gpio_pm_2bit_save(struct samsung_gpio_chip *chip)
{
chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
}
/**
- * s3c_gpio_pm_2bit_resume() - restore the given GPIO bank
+ * samsung_gpio_pm_2bit_resume() - restore the given GPIO bank
* @chip: The chip information to resume.
*
* Restore one of the GPIO banks that was saved during suspend. This is
* [1] this assumes that writing to a pin DAT whilst in SFN will set the
* state for when it is next output.
*/
-static void s3c_gpio_pm_2bit_resume(struct s3c_gpio_chip *chip)
+static void samsung_gpio_pm_2bit_resume(struct samsung_gpio_chip *chip)
{
void __iomem *base = chip->base;
u32 old_gpcon = __raw_readl(base + OFFS_CON);
chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
}
-struct s3c_gpio_pm s3c_gpio_pm_2bit = {
- .save = s3c_gpio_pm_2bit_save,
- .resume = s3c_gpio_pm_2bit_resume,
+struct samsung_gpio_pm samsung_gpio_pm_2bit = {
+ .save = samsung_gpio_pm_2bit_save,
+ .resume = samsung_gpio_pm_2bit_resume,
};
#if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P)
-static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip)
+static void samsung_gpio_pm_4bit_save(struct samsung_gpio_chip *chip)
{
chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
chip->pm_save[2] = __raw_readl(chip->base + OFFS_DAT);
chip->pm_save[0] = __raw_readl(chip->base - 4);
}
-static u32 s3c_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
+static u32 samsung_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
{
u32 old, new, mask;
u32 change_mask = 0x0;
return change_mask;
}
-static void s3c_gpio_pm_4bit_con(struct s3c_gpio_chip *chip, int index)
+static void samsung_gpio_pm_4bit_con(struct samsung_gpio_chip *chip, int index)
{
void __iomem *con = chip->base + (index * 4);
u32 old_gpcon = __raw_readl(con);
u32 gps_gpcon = chip->pm_save[index + 1];
u32 gpcon, mask;
- mask = s3c_gpio_pm_4bit_mask(old_gpcon, gps_gpcon);
+ mask = samsung_gpio_pm_4bit_mask(old_gpcon, gps_gpcon);
gpcon = old_gpcon & ~mask;
gpcon |= gps_gpcon & mask;
__raw_writel(gpcon, con);
}
-static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip)
+static void samsung_gpio_pm_4bit_resume(struct samsung_gpio_chip *chip)
{
void __iomem *base = chip->base;
u32 old_gpcon[2];
old_gpcon[0] = 0;
old_gpcon[1] = __raw_readl(base + OFFS_CON);
- s3c_gpio_pm_4bit_con(chip, 0);
+ samsung_gpio_pm_4bit_con(chip, 0);
if (chip->chip.ngpio > 8) {
old_gpcon[0] = __raw_readl(base - 4);
- s3c_gpio_pm_4bit_con(chip, -1);
+ samsung_gpio_pm_4bit_con(chip, -1);
}
/* Now change the configurations that require DAT,CON */
old_gpdat, gps_gpdat);
}
-struct s3c_gpio_pm s3c_gpio_pm_4bit = {
- .save = s3c_gpio_pm_4bit_save,
- .resume = s3c_gpio_pm_4bit_resume,
+struct samsung_gpio_pm samsung_gpio_pm_4bit = {
+ .save = samsung_gpio_pm_4bit_save,
+ .resume = samsung_gpio_pm_4bit_resume,
};
#endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P */
/**
- * s3c_pm_save_gpio() - save gpio chip data for suspend
+ * samsung_pm_save_gpio() - save gpio chip data for suspend
* @ourchip: The chip for suspend.
*/
-static void s3c_pm_save_gpio(struct s3c_gpio_chip *ourchip)
+static void samsung_pm_save_gpio(struct samsung_gpio_chip *ourchip)
{
- struct s3c_gpio_pm *pm = ourchip->pm;
+ struct samsung_gpio_pm *pm = ourchip->pm;
if (pm == NULL || pm->save == NULL)
S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
}
/**
- * s3c_pm_save_gpios() - Save the state of the GPIO banks.
+ * samsung_pm_save_gpios() - Save the state of the GPIO banks.
*
* For all the GPIO banks, save the state of each one ready for going
* into a suspend mode.
*/
-void s3c_pm_save_gpios(void)
+void samsung_pm_save_gpios(void)
{
- struct s3c_gpio_chip *ourchip;
+ struct samsung_gpio_chip *ourchip;
unsigned int gpio_nr;
for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) {
- ourchip = s3c_gpiolib_getchip(gpio_nr);
+ ourchip = samsung_gpiolib_getchip(gpio_nr);
if (!ourchip) {
gpio_nr++;
continue;
}
- s3c_pm_save_gpio(ourchip);
+ samsung_pm_save_gpio(ourchip);
S3C_PMDBG("%s: save %08x,%08x,%08x,%08x\n",
ourchip->chip.label,
}
/**
- * s3c_pm_resume_gpio() - restore gpio chip data after suspend
+ * samsung_pm_resume_gpio() - restore gpio chip data after suspend
* @ourchip: The suspended chip.
*/
-static void s3c_pm_resume_gpio(struct s3c_gpio_chip *ourchip)
+static void samsung_pm_resume_gpio(struct samsung_gpio_chip *ourchip)
{
- struct s3c_gpio_pm *pm = ourchip->pm;
+ struct samsung_gpio_pm *pm = ourchip->pm;
if (pm == NULL || pm->resume == NULL)
S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
pm->resume(ourchip);
}
-void s3c_pm_restore_gpios(void)
+void samsung_pm_restore_gpios(void)
{
- struct s3c_gpio_chip *ourchip;
+ struct samsung_gpio_chip *ourchip;
unsigned int gpio_nr;
for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) {
- ourchip = s3c_gpiolib_getchip(gpio_nr);
+ ourchip = samsung_gpiolib_getchip(gpio_nr);
if (!ourchip) {
gpio_nr++;
continue;
}
- s3c_pm_resume_gpio(ourchip);
+ samsung_pm_resume_gpio(ourchip);
gpio_nr += ourchip->chip.ngpio;
gpio_nr += CONFIG_S3C_GPIO_SPACE;
/* save all necessary core registers not covered by the drivers */
- s3c_pm_save_gpios();
- s3c_pm_saved_gpios();
+ samsung_pm_save_gpios();
+ samsung_pm_saved_gpios();
s3c_pm_save_uarts();
s3c_pm_save_core();
s3c_pm_restore_core();
s3c_pm_restore_uarts();
- s3c_pm_restore_gpios();
+ samsung_pm_restore_gpios();
s3c_pm_restored_gpios();
s3c_pm_debug_init();
#include <plat/cpu.h>
#include <plat/regs-timer.h>
-#include <mach/pwm-clock.h>
+#include <plat/pwm-clock.h>
/* Each of the timers 0 through 5 go through the following
* clock tree, with the inputs depending on the timers.
unsigned long bits;
unsigned long shift = S3C2410_TCFG1_SHIFT(id);
+ unsigned long mux_tclk;
+
+ if (soc_is_s3c24xx())
+ mux_tclk = S3C2410_TCFG1_MUX_TCLK;
+ else if (soc_is_s5p6440() || soc_is_s5p6450())
+ mux_tclk = 0;
+ else
+ mux_tclk = S3C64XX_TCFG1_MUX_TCLK;
+
if (parent == s3c24xx_pwmclk_tclk(id))
- bits = S3C_TCFG1_MUX_TCLK << shift;
+ bits = mux_tclk << shift;
else if (parent == s3c24xx_pwmclk_tdiv(id))
bits = clk_pwm_tdiv_bits(to_tdiv(parent)) << shift;
else
goto err_clk_tin;
}
+ clk_enable(pwm->clk);
+ clk_enable(pwm->clk_div);
+
local_irq_save(flags);
tcon = __raw_readl(S3C2410_TCON);
return 0;
err_clk_tdiv:
+ clk_disable(pwm->clk_div);
+ clk_disable(pwm->clk);
clk_put(pwm->clk_div);
err_clk_tin:
{
struct pwm_device *pwm = platform_get_drvdata(pdev);
+ clk_disable(pwm->clk_div);
+ clk_disable(pwm->clk);
clk_put(pwm->clk_div);
clk_put(pwm->clk);
kfree(pwm);
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/types.h>
+#include <linux/export.h>
#include <mach/dma.h>
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <linux/module.h>
#include <linux/types.h>
#include <linux/cpu.h>
#include <linux/cpu_pm.h>
},
};
-static struct mtd_partition *nand_part_info(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(nand_partitions);
- return nand_partitions;
-}
static struct atmel_nand_data atngw100mkii_nand_data __initdata = {
.cle = 21,
.rdy_pin = GPIO_PIN_PB(28),
.enable_pin = GPIO_PIN_PE(23),
.bus_width_16 = true,
- .partition_info = nand_part_info,
+ .parts = nand_partitions,
+ .num_parts = ARRAY_SIZE(nand_partitions),
};
#endif
},
};
-static struct mtd_partition *nand_part_info(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(nand_partitions);
- return nand_partitions;
-}
-
static struct atmel_nand_data atstk1006_nand_data __initdata = {
.cle = 21,
.ale = 22,
.rdy_pin = GPIO_PIN_PB(30),
.enable_pin = GPIO_PIN_PB(29),
- .partition_info = nand_part_info,
+ .parts = nand_partitions,
+ .num_parts = ARRAY_SIZE(num_partitions),
};
#endif
*/
#include <linux/clk.h>
#include <linux/err.h>
+#include <linux/export.h>
#include <linux/device.h>
#include <linux/string.h>
#include <linux/list.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/err.h>
+#include <linux/export.h>
#include <asm/system.h>
static struct clk *cpuclk;
u8 ale; /* address line number connected to ALE */
u8 cle; /* address line number connected to CLE */
u8 bus_width_16; /* buswidth is 16 bit */
- struct mtd_partition *(*partition_info)(int size, int *num_partitions);
+ struct mtd_partition *parts;
+ unsigned int num_parts;
};
struct platform_device *
at32_add_device_nand(unsigned int id, struct atmel_nand_data *data);
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/syscore_ops.h>
+#include <linux/export.h>
#include <asm/io.h>
#include <linux/clk.h>
#include <linux/debugfs.h>
+#include <linux/export.h>
#include <linux/fs.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/dma-mapping.h>
#include <linux/gfp.h>
+#include <linux/export.h>
#include <asm/addrspace.h>
#include <asm/cacheflush.h>
struct bfin_serial_port {
struct uart_port port;
unsigned int old_status;
+ int tx_irq;
+ int rx_irq;
int status_irq;
#ifndef BFIN_UART_BF54X_STYLE
unsigned int lsr;
#include <linux/spinlock.h>
#include <linux/dma-mapping.h>
#include <linux/scatterlist.h>
+#include <linux/export.h>
static spinlock_t dma_page_lock;
static unsigned long *dma_page;
*/
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/perf_event.h>
#include <asm/bfin_pfmon.h>
#if defined(CONFIG_FB) || defined(CONFIG_FB_MODULE)
#include <linux/fb.h>
+#include <linux/export.h>
unsigned long get_fb_unmapped_area(struct file *filp, unsigned long orig_addr,
unsigned long len, unsigned long pgoff, unsigned long flags)
{
*/
#include <linux/device.h>
+#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
*/
#include <linux/device.h>
+#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
*/
#include <linux/device.h>
+#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
*/
#include <linux/device.h>
+#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
*/
#include <linux/device.h>
+#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
*/
#include <linux/device.h>
+#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX + 1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX + 1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX + 1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX + 1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX + 1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX + 1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
*/
#include <linux/device.h>
+#include <linux/export.h>
#include <linux/etherdevice.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
#include <linux/device.h>
#include <linux/etherdevice.h>
+#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
*/
#include <linux/device.h>
+#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/io.h>
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
#include <linux/device.h>
#include <linux/etherdevice.h>
+#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#include <linux/bfin_mac.h>
+#include <linux/export.h>
static const unsigned short bfin_mac_peripherals[] = P_RMII0;
static struct bfin_phydev_platform_data bfin_phydev_data[] = {
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
*/
#include <linux/device.h>
+#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/io.h>
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
#include <linux/device.h>
#include <linux/etherdevice.h>
+#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART2_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART2_TX,
+ .end = IRQ_UART2_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART2_RX,
- .end = IRQ_UART2_RX+1,
+ .end = IRQ_UART2_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART0_RBR+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_RBR+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART2_RBR+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART2_TX,
+ .end = IRQ_UART2_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART2_RX,
- .end = IRQ_UART2_RX+1,
+ .end = IRQ_UART2_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART3_RBR+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART3_TX,
+ .end = IRQ_UART3_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART3_RX,
- .end = IRQ_UART3_RX+1,
+ .end = IRQ_UART3_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART0_RBR+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_RBR+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART2_RBR+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART2_TX,
+ .end = IRQ_UART2_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART2_RX,
- .end = IRQ_UART2_RX+1,
+ .end = IRQ_UART2_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART3_RBR+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART3_TX,
+ .end = IRQ_UART3_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART3_RX,
- .end = IRQ_UART3_RX+1,
+ .end = IRQ_UART3_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = BFIN_UART_GCTL + 2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART_TX,
+ .end = IRQ_UART_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART_RX,
- .end = IRQ_UART_RX + 1,
+ .end = IRQ_UART_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART_TX,
+ .end = IRQ_UART_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART_RX,
- .end = IRQ_UART_RX+1,
+ .end = IRQ_UART_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART_TX,
+ .end = IRQ_UART_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART_RX,
- .end = IRQ_UART_RX+1,
+ .end = IRQ_UART_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART_TX,
+ .end = IRQ_UART_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART_RX,
- .end = IRQ_UART_RX+1,
+ .end = IRQ_UART_RX,
.flags = IORESOURCE_IRQ,
},
{
*/
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
#include <linux/swap.h>
#include <linux/bootmem.h>
#include <linux/uaccess.h>
+#include <linux/export.h>
#include <asm/bfin-global.h>
#include <asm/pda.h>
#include <asm/cplbinit.h>
config ETRAX_ETHERNET
bool "Ethernet support"
depends on ETRAX_ARCH_V10
- select NET_ETHERNET
+ select ETHERNET
select NET_CORE
select MII
help
config ETRAX_ETHERNET
bool "Ethernet support"
depends on ETRAX_ARCH_V32
- select NET_ETHERNET
+ select ETHERNET
select NET_CORE
select MII
help
this->ecc.mode = NAND_ECC_SOFT;
/* Enable the following for a flash based bad block table */
- /* this->options = NAND_USE_FLASH_BBT; */
+ /* this->bbt_options = NAND_BBT_USE_FLASH; */
/* Scan to find existence of the device */
if (nand_scan(crisv32_mtd, 1)) {
this->ecc.mode = NAND_ECC_SOFT;
/* Enable the following for a flash based bad block table */
- /* this->options = NAND_USE_FLASH_BBT; */
+ /* this->bbt_options = NAND_BBT_USE_FLASH; */
/* Scan to find existence of the device */
if (nand_scan(crisv32_mtd, 1)) {
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/swiotlb.h>
+#include <linux/export.h>
#include <asm/machvec.h>
extern struct dma_map_ops sba_dma_ops, swiotlb_dma_ops;
+++ /dev/null
-/******************************************************************************
- * arch/ia64/include/asm/xen/grant_table.h
- *
- * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
- * VA Linux Systems Japan K.K.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef _ASM_IA64_XEN_GRANT_TABLE_H
-#define _ASM_IA64_XEN_GRANT_TABLE_H
-
-struct vm_struct *xen_alloc_vm_area(unsigned long size);
-void xen_free_vm_area(struct vm_struct *area);
-
-#endif /* _ASM_IA64_XEN_GRANT_TABLE_H */
DEFINE_GUEST_HANDLE(int);
DEFINE_GUEST_HANDLE(long);
DEFINE_GUEST_HANDLE(void);
+DEFINE_GUEST_HANDLE(uint64_t);
typedef unsigned long xen_pfn_t;
DEFINE_GUEST_HANDLE(xen_pfn_t);
#include <linux/dma-mapping.h>
+#include <linux/export.h>
/* Set this to 1 if there is a HW IOMMU in the system */
int iommu_detected __read_mostly;
#include <linux/bootmem.h>
#include <linux/nodemask.h>
#include <linux/notifier.h>
+#include <linux/export.h>
#include <asm/mmzone.h>
#include <asm/numa.h>
#include <asm/cpu.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/bootmem.h>
+#include <linux/export.h>
#include <asm/machvec.h>
#include <asm/page.h>
#include "xtalk/hubdev.h"
#include <linux/acpi.h>
#include <linux/slab.h>
+#include <linux/export.h>
/*
*/
#include <linux/slab.h>
+#include <linux/export.h>
#include <asm/sn/types.h>
#include <asm/sn/addrs.h>
#include <asm/sn/io.h>
#include <linux/types.h>
#include <linux/pci.h>
+#include <linux/export.h>
#include <asm/sn/addrs.h>
#include <asm/sn/geo.h>
#include <asm/sn/pcibr_provider.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/pci.h>
+#include <linux/export.h>
#include <asm/sn/addrs.h>
#include <asm/sn/geo.h>
#include <asm/sn/pcibr_provider.h>
#include <linux/pci.h>
#include <linux/bitmap.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <asm/sn/sn_sal.h>
#include <asm/sn/addrs.h>
#include <asm/sn/io.h>
#include <asm/xen/hypervisor.h>
-struct vm_struct *xen_alloc_vm_area(unsigned long size)
-{
- int order;
- unsigned long virt;
- unsigned long nr_pages;
- struct vm_struct *area;
-
- order = get_order(size);
- virt = __get_free_pages(GFP_KERNEL, order);
- if (virt == 0)
- goto err0;
- nr_pages = 1 << order;
- scrub_pages(virt, nr_pages);
-
- area = kmalloc(sizeof(*area), GFP_KERNEL);
- if (area == NULL)
- goto err1;
-
- area->flags = VM_IOREMAP;
- area->addr = (void *)virt;
- area->size = size;
- area->pages = NULL;
- area->nr_pages = nr_pages;
- area->phys_addr = 0; /* xenbus_map_ring_valloc uses this field! */
-
- return area;
-
-err1:
- free_pages(virt, order);
-err0:
- return NULL;
-}
-EXPORT_SYMBOL_GPL(xen_alloc_vm_area);
-
-void xen_free_vm_area(struct vm_struct *area)
-{
- unsigned int order = get_order(area->size);
- unsigned long i;
- unsigned long phys_addr = __pa(area->addr);
-
- /* This area is used for foreign page mappping.
- * So underlying machine page may not be assigned. */
- for (i = 0; i < (1 << order); i++) {
- unsigned long ret;
- unsigned long gpfn = (phys_addr >> PAGE_SHIFT) + i;
- struct xen_memory_reservation reservation = {
- .nr_extents = 1,
- .address_bits = 0,
- .extent_order = 0,
- .domid = DOMID_SELF
- };
- set_xen_guest_handle(reservation.extent_start, &gpfn);
- ret = HYPERVISOR_memory_op(XENMEM_populate_physmap,
- &reservation);
- BUG_ON(ret != 1);
- }
- free_pages((unsigned long)area->addr, order);
- kfree(area);
-}
-EXPORT_SYMBOL_GPL(xen_free_vm_area);
-
-
/****************************************************************************
* grant table hack
* cmd: GNTTABOP_xxx
*/
#include <linux/efi.h>
+#include <linux/export.h>
#include <asm/xen/hypervisor.h>
#include <asm/xen/privop.h>
default "1"
depends on NEED_MULTIPLE_NODES
-# turning this on wastes a bunch of space.
-# Summit needs it only when NUMA is on
-config BOOT_IOREMAP
- bool
- depends on NUMA
- default n
-
endmenu
select HAVE_IDE
select HAVE_AOUT if MMU
select GENERIC_ATOMIC64 if MMU
- select HAVE_GENERIC_HARDIRQS if !MMU
- select GENERIC_IRQ_SHOW if !MMU
+ select HAVE_GENERIC_HARDIRQS
+ select GENERIC_IRQ_SHOW
select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
config RWSEM_GENERIC_SPINLOCK
comment "Bus Support"
+config DIO
+ bool "DIO bus support"
+ depends on HP300
+ default y
+ help
+ Say Y here to enable support for the "DIO" expansion bus used in
+ HP300 machines. If you are using such a system you almost certainly
+ want this.
+
config NUBUS
bool
depends on MAC
including the model, CPU, MMU, clock speed, BogoMIPS rating,
and memory size.
+config NATFEAT
+ bool "ARAnyM emulator support"
+ depends on ATARI
+ help
+ This option enables support for ARAnyM native features, such as
+ access to a disk image as /dev/hda.
+
+config NFBLOCK
+ tristate "NatFeat block device support"
+ depends on BLOCK && NATFEAT
+ help
+ Say Y to include support for the ARAnyM NatFeat block device
+ which allows direct access to the hard drives without using
+ the hardware emulation.
+
+config NFCON
+ tristate "NatFeat console driver"
+ depends on NATFEAT
+ help
+ Say Y to include support for the ARAnyM NatFeat console driver
+ which allows the console output to be redirected to the stderr
+ output of ARAnyM.
+
+config NFETH
+ tristate "NatFeat Ethernet support"
+ depends on ETHERNET && NATFEAT
+ help
+ Say Y to include support for the ARAnyM NatFeat network device
+ which will emulate a regular ethernet device while presenting an
+ ethertap device to the host system.
+
endmenu
menu "Character devices"
/*
- * linux/arch/m68k/amiga/amiints.c -- Amiga Linux interrupt handling code
+ * Amiga Linux interrupt handling code
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
- *
- * 11/07/96: rewritten interrupt handling, irq lists are exists now only for
- * this sources where it makes sense (VERTB/PORTS/EXTER) and you must
- * be careful that dev_id for this sources is unique since this the
- * only possibility to distinguish between different handlers for
- * free_irq. irq lists also have different irq flags:
- * - IRQ_FLG_FAST: handler is inserted at top of list (after other
- * fast handlers)
- * - IRQ_FLG_SLOW: handler is inserted at bottom of list and before
- * they're executed irq level is set to the previous
- * one, but handlers don't need to be reentrant, if
- * reentrance occurred, slow handlers will be just
- * called again.
- * The whole interrupt handling for CIAs is moved to cia.c
- * /Roman Zippel
- *
- * 07/08/99: rewamp of the interrupt handling - we now have two types of
- * interrupts, normal and fast handlers, fast handlers being
- * marked with IRQF_DISABLED and runs with all other interrupts
- * disabled. Normal interrupts disable their own source but
- * run with all other interrupt sources enabled.
- * PORTS and EXTER interrupts are always shared even if the
- * drivers do not explicitly mark this when calling
- * request_irq which they really should do.
- * This is similar to the way interrupts are handled on all
- * other architectures and makes a ton of sense besides
- * having the advantage of making it easier to share
- * drivers.
- * /Jes
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
+#include <linux/irq.h>
#include <asm/irq.h>
#include <asm/traps.h>
#include <asm/amigaints.h>
#include <asm/amipcmcia.h>
-static void amiga_enable_irq(unsigned int irq);
-static void amiga_disable_irq(unsigned int irq);
-static irqreturn_t ami_int1(int irq, void *dev_id);
-static irqreturn_t ami_int3(int irq, void *dev_id);
-static irqreturn_t ami_int4(int irq, void *dev_id);
-static irqreturn_t ami_int5(int irq, void *dev_id);
-
-static struct irq_controller amiga_irq_controller = {
- .name = "amiga",
- .lock = __SPIN_LOCK_UNLOCKED(amiga_irq_controller.lock),
- .enable = amiga_enable_irq,
- .disable = amiga_disable_irq,
-};
-
-/*
- * void amiga_init_IRQ(void)
- *
- * Parameters: None
- *
- * Returns: Nothing
- *
- * This function should be called during kernel startup to initialize
- * the amiga IRQ handling routines.
- */
-
-void __init amiga_init_IRQ(void)
-{
- if (request_irq(IRQ_AUTO_1, ami_int1, 0, "int1", NULL))
- pr_err("Couldn't register int%d\n", 1);
- if (request_irq(IRQ_AUTO_3, ami_int3, 0, "int3", NULL))
- pr_err("Couldn't register int%d\n", 3);
- if (request_irq(IRQ_AUTO_4, ami_int4, 0, "int4", NULL))
- pr_err("Couldn't register int%d\n", 4);
- if (request_irq(IRQ_AUTO_5, ami_int5, 0, "int5", NULL))
- pr_err("Couldn't register int%d\n", 5);
-
- m68k_setup_irq_controller(&amiga_irq_controller, IRQ_USER, AMI_STD_IRQS);
-
- /* turn off PCMCIA interrupts */
- if (AMIGAHW_PRESENT(PCMCIA))
- gayle.inten = GAYLE_IRQ_IDE;
-
- /* turn off all interrupts and enable the master interrupt bit */
- amiga_custom.intena = 0x7fff;
- amiga_custom.intreq = 0x7fff;
- amiga_custom.intena = IF_SETCLR | IF_INTEN;
-
- cia_init_IRQ(&ciaa_base);
- cia_init_IRQ(&ciab_base);
-}
/*
* Enable/disable a particular machine specific interrupt source.
* internal data, that may not be changed by the interrupt at the same time.
*/
-static void amiga_enable_irq(unsigned int irq)
+static void amiga_irq_enable(struct irq_data *data)
{
- amiga_custom.intena = IF_SETCLR | (1 << (irq - IRQ_USER));
+ amiga_custom.intena = IF_SETCLR | (1 << (data->irq - IRQ_USER));
}
-static void amiga_disable_irq(unsigned int irq)
+static void amiga_irq_disable(struct irq_data *data)
{
- amiga_custom.intena = 1 << (irq - IRQ_USER);
+ amiga_custom.intena = 1 << (data->irq - IRQ_USER);
}
+static struct irq_chip amiga_irq_chip = {
+ .name = "amiga",
+ .irq_enable = amiga_irq_enable,
+ .irq_disable = amiga_irq_disable,
+};
+
+
/*
* The builtin Amiga hardware interrupt handlers.
*/
-static irqreturn_t ami_int1(int irq, void *dev_id)
+static void ami_int1(unsigned int irq, struct irq_desc *desc)
{
unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
/* if serial transmit buffer empty, interrupt */
if (ints & IF_TBE) {
amiga_custom.intreq = IF_TBE;
- m68k_handle_int(IRQ_AMIGA_TBE);
+ generic_handle_irq(IRQ_AMIGA_TBE);
}
/* if floppy disk transfer complete, interrupt */
if (ints & IF_DSKBLK) {
amiga_custom.intreq = IF_DSKBLK;
- m68k_handle_int(IRQ_AMIGA_DSKBLK);
+ generic_handle_irq(IRQ_AMIGA_DSKBLK);
}
/* if software interrupt set, interrupt */
if (ints & IF_SOFT) {
amiga_custom.intreq = IF_SOFT;
- m68k_handle_int(IRQ_AMIGA_SOFT);
+ generic_handle_irq(IRQ_AMIGA_SOFT);
}
- return IRQ_HANDLED;
}
-static irqreturn_t ami_int3(int irq, void *dev_id)
+static void ami_int3(unsigned int irq, struct irq_desc *desc)
{
unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
/* if a blitter interrupt */
if (ints & IF_BLIT) {
amiga_custom.intreq = IF_BLIT;
- m68k_handle_int(IRQ_AMIGA_BLIT);
+ generic_handle_irq(IRQ_AMIGA_BLIT);
}
/* if a copper interrupt */
if (ints & IF_COPER) {
amiga_custom.intreq = IF_COPER;
- m68k_handle_int(IRQ_AMIGA_COPPER);
+ generic_handle_irq(IRQ_AMIGA_COPPER);
}
/* if a vertical blank interrupt */
if (ints & IF_VERTB) {
amiga_custom.intreq = IF_VERTB;
- m68k_handle_int(IRQ_AMIGA_VERTB);
+ generic_handle_irq(IRQ_AMIGA_VERTB);
}
- return IRQ_HANDLED;
}
-static irqreturn_t ami_int4(int irq, void *dev_id)
+static void ami_int4(unsigned int irq, struct irq_desc *desc)
{
unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
/* if audio 0 interrupt */
if (ints & IF_AUD0) {
amiga_custom.intreq = IF_AUD0;
- m68k_handle_int(IRQ_AMIGA_AUD0);
+ generic_handle_irq(IRQ_AMIGA_AUD0);
}
/* if audio 1 interrupt */
if (ints & IF_AUD1) {
amiga_custom.intreq = IF_AUD1;
- m68k_handle_int(IRQ_AMIGA_AUD1);
+ generic_handle_irq(IRQ_AMIGA_AUD1);
}
/* if audio 2 interrupt */
if (ints & IF_AUD2) {
amiga_custom.intreq = IF_AUD2;
- m68k_handle_int(IRQ_AMIGA_AUD2);
+ generic_handle_irq(IRQ_AMIGA_AUD2);
}
/* if audio 3 interrupt */
if (ints & IF_AUD3) {
amiga_custom.intreq = IF_AUD3;
- m68k_handle_int(IRQ_AMIGA_AUD3);
+ generic_handle_irq(IRQ_AMIGA_AUD3);
}
- return IRQ_HANDLED;
}
-static irqreturn_t ami_int5(int irq, void *dev_id)
+static void ami_int5(unsigned int irq, struct irq_desc *desc)
{
unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
/* if serial receive buffer full interrupt */
if (ints & IF_RBF) {
/* acknowledge of IF_RBF must be done by the serial interrupt */
- m68k_handle_int(IRQ_AMIGA_RBF);
+ generic_handle_irq(IRQ_AMIGA_RBF);
}
/* if a disk sync interrupt */
if (ints & IF_DSKSYN) {
amiga_custom.intreq = IF_DSKSYN;
- m68k_handle_int(IRQ_AMIGA_DSKSYN);
+ generic_handle_irq(IRQ_AMIGA_DSKSYN);
}
- return IRQ_HANDLED;
+}
+
+
+/*
+ * void amiga_init_IRQ(void)
+ *
+ * Parameters: None
+ *
+ * Returns: Nothing
+ *
+ * This function should be called during kernel startup to initialize
+ * the amiga IRQ handling routines.
+ */
+
+void __init amiga_init_IRQ(void)
+{
+ m68k_setup_irq_controller(&amiga_irq_chip, handle_simple_irq, IRQ_USER,
+ AMI_STD_IRQS);
+
+ irq_set_chained_handler(IRQ_AUTO_1, ami_int1);
+ irq_set_chained_handler(IRQ_AUTO_3, ami_int3);
+ irq_set_chained_handler(IRQ_AUTO_4, ami_int4);
+ irq_set_chained_handler(IRQ_AUTO_5, ami_int5);
+
+ /* turn off PCMCIA interrupts */
+ if (AMIGAHW_PRESENT(PCMCIA))
+ gayle.inten = GAYLE_IRQ_IDE;
+
+ /* turn off all interrupts and enable the master interrupt bit */
+ amiga_custom.intena = 0x7fff;
+ amiga_custom.intreq = 0x7fff;
+ amiga_custom.intena = IF_SETCLR | IF_INTEN;
+
+ cia_init_IRQ(&ciaa_base);
+ cia_init_IRQ(&ciab_base);
}
amiga_custom.intreq = base->int_mask;
for (; ints; mach_irq++, ints >>= 1) {
if (ints & 1)
- m68k_handle_int(mach_irq);
+ generic_handle_irq(mach_irq);
}
return IRQ_HANDLED;
}
-static void cia_enable_irq(unsigned int irq)
+static void cia_irq_enable(struct irq_data *data)
{
+ unsigned int irq = data->irq;
unsigned char mask;
if (irq >= IRQ_AMIGA_CIAB) {
}
}
-static void cia_disable_irq(unsigned int irq)
+static void cia_irq_disable(struct irq_data *data)
{
+ unsigned int irq = data->irq;
+
if (irq >= IRQ_AMIGA_CIAB)
cia_able_irq(&ciab_base, 1 << (irq - IRQ_AMIGA_CIAB));
else
cia_able_irq(&ciaa_base, 1 << (irq - IRQ_AMIGA_CIAA));
}
-static struct irq_controller cia_irq_controller = {
+static struct irq_chip cia_irq_chip = {
.name = "cia",
- .lock = __SPIN_LOCK_UNLOCKED(cia_irq_controller.lock),
- .enable = cia_enable_irq,
- .disable = cia_disable_irq,
+ .irq_enable = cia_irq_enable,
+ .irq_disable = cia_irq_disable,
};
/*
* into this chain.
*/
-static void auto_enable_irq(unsigned int irq)
+static void auto_irq_enable(struct irq_data *data)
{
- switch (irq) {
+ switch (data->irq) {
case IRQ_AUTO_2:
amiga_custom.intena = IF_SETCLR | IF_PORTS;
break;
}
}
-static void auto_disable_irq(unsigned int irq)
+static void auto_irq_disable(struct irq_data *data)
{
- switch (irq) {
+ switch (data->irq) {
case IRQ_AUTO_2:
amiga_custom.intena = IF_PORTS;
break;
}
}
-static struct irq_controller auto_irq_controller = {
+static struct irq_chip auto_irq_chip = {
.name = "auto",
- .lock = __SPIN_LOCK_UNLOCKED(auto_irq_controller.lock),
- .enable = auto_enable_irq,
- .disable = auto_disable_irq,
+ .irq_enable = auto_irq_enable,
+ .irq_disable = auto_irq_disable,
};
void __init cia_init_IRQ(struct ciabase *base)
{
- m68k_setup_irq_controller(&cia_irq_controller, base->cia_irq, CIA_IRQS);
+ m68k_setup_irq_controller(&cia_irq_chip, handle_simple_irq,
+ base->cia_irq, CIA_IRQS);
/* clear any pending interrupt and turn off all interrupts */
cia_set_irq(base, CIA_ICR_ALL);
cia_able_irq(base, CIA_ICR_ALL);
/* override auto int and install CIA handler */
- m68k_setup_irq_controller(&auto_irq_controller, base->handler_irq, 1);
- m68k_irq_startup(base->handler_irq);
+ m68k_setup_irq_controller(&auto_irq_chip, handle_simple_irq,
+ base->handler_irq, 1);
+ m68k_irq_startup_irq(base->handler_irq);
if (request_irq(base->handler_irq, cia_handler, IRQF_SHARED,
base->name, base))
pr_err("Couldn't register %s interrupt\n", base->name);
#include <linux/interrupt.h>
+#include <linux/irq.h>
-#include <asm/irq.h>
#include <asm/traps.h>
#include <asm/apollohw.h>
-void dn_process_int(unsigned int irq, struct pt_regs *fp)
+unsigned int apollo_irq_startup(struct irq_data *data)
{
- __m68k_handle_int(irq, fp);
+ unsigned int irq = data->irq;
- *(volatile unsigned char *)(pica)=0x20;
- *(volatile unsigned char *)(picb)=0x20;
-}
-
-int apollo_irq_startup(unsigned int irq)
-{
if (irq < 8)
*(volatile unsigned char *)(pica+1) &= ~(1 << irq);
else
return 0;
}
-void apollo_irq_shutdown(unsigned int irq)
+void apollo_irq_shutdown(struct irq_data *data)
{
+ unsigned int irq = data->irq;
+
if (irq < 8)
*(volatile unsigned char *)(pica+1) |= (1 << irq);
else
*(volatile unsigned char *)(picb+1) |= (1 << (irq - 8));
}
-static struct irq_controller apollo_irq_controller = {
+void apollo_irq_eoi(struct irq_data *data)
+{
+ *(volatile unsigned char *)(pica) = 0x20;
+ *(volatile unsigned char *)(picb) = 0x20;
+}
+
+static struct irq_chip apollo_irq_chip = {
.name = "apollo",
- .lock = __SPIN_LOCK_UNLOCKED(apollo_irq_controller.lock),
- .startup = apollo_irq_startup,
- .shutdown = apollo_irq_shutdown,
+ .irq_startup = apollo_irq_startup,
+ .irq_shutdown = apollo_irq_shutdown,
+ .irq_eoi = apollo_irq_eoi,
};
void __init dn_init_IRQ(void)
{
- m68k_setup_user_interrupt(VEC_USER + 96, 16, dn_process_int);
- m68k_setup_irq_controller(&apollo_irq_controller, IRQ_APOLLO, 16);
+ m68k_setup_user_interrupt(VEC_USER + 96, 16);
+ m68k_setup_irq_controller(&apollo_irq_chip, handle_fasteoi_irq,
+ IRQ_APOLLO, 16);
}
* <asm/atariints.h>): Autovector interrupts are 1..7, then follow ST-MFP,
* TT-MFP, SCC, and finally VME interrupts. Vector numbers for the latter can
* be allocated by atari_register_vme_int().
- *
- * Each interrupt can be of three types:
- *
- * - SLOW: The handler runs with all interrupts enabled, except the one it
- * was called by (to avoid reentering). This should be the usual method.
- * But it is currently possible only for MFP ints, since only the MFP
- * offers an easy way to mask interrupts.
- *
- * - FAST: The handler runs with all interrupts disabled. This should be used
- * only for really fast handlers, that just do actions immediately
- * necessary, and let the rest do a bottom half or task queue.
- *
- * - PRIORITIZED: The handler can be interrupted by higher-level ints
- * (greater IPL, no MFP priorities!). This is the method of choice for ints
- * which should be slow, but are not from a MFP.
- *
- * The feature of more than one handler for one int source is still there, but
- * only applicable if all handers are of the same type. To not slow down
- * processing of ints with only one handler by the chaining feature, the list
- * calling function atari_call_irq_list() is only plugged in at the time the
- * second handler is registered.
- *
- * Implementation notes: For fast-as-possible int handling, there are separate
- * entry points for each type (slow/fast/prio). The assembler handler calls
- * the irq directly in the usual case, no C wrapper is involved. In case of
- * multiple handlers, atari_call_irq_list() is registered as handler and calls
- * in turn the real irq's. To ease access from assembler level to the irq
- * function pointer and accompanying data, these two are stored in a separate
- * array, irq_handler[]. The rest of data (type, name) are put into a second
- * array, irq_param, that is accessed from C only. For each slow interrupt (32
- * in all) there are separate handler functions, which makes it possible to
- * hard-code the MFP register address and value, are necessary to mask the
- * int. If there'd be only one generic function, lots of calculations would be
- * needed to determine MFP register and int mask from the vector number :-(
- *
- * Furthermore, slow ints may not lower the IPL below its previous value
- * (before the int happened). This is needed so that an int of class PRIO, on
- * that this int may be stacked, cannot be reentered. This feature is
- * implemented as follows: If the stack frame format is 1 (throwaway), the int
- * is not stacked, and the IPL is anded with 0xfbff, resulting in a new level
- * 2, which still blocks the HSYNC, but no interrupts of interest. If the
- * frame format is 0, the int is nested, and the old IPL value can be found in
- * the sr copy in the frame.
- */
-
-#if 0
-
-#define NUM_INT_SOURCES (8 + NUM_ATARI_SOURCES)
-
-typedef void (*asm_irq_handler)(void);
-
-struct irqhandler {
- irqreturn_t (*handler)(int, void *, struct pt_regs *);
- void *dev_id;
-};
-
-struct irqparam {
- unsigned long flags;
- const char *devname;
-};
-
-/*
- * Array with irq's and their parameter data. This array is accessed from low
- * level assembler code, so an element size of 8 allows usage of index scaling
- * addressing mode.
*/
-static struct irqhandler irq_handler[NUM_INT_SOURCES];
-
-/*
- * This array hold the rest of parameters of int handlers: type
- * (slow,fast,prio) and the name of the handler. These values are only
- * accessed from C
- */
-static struct irqparam irq_param[NUM_INT_SOURCES];
-
-/* check for valid int number (complex, sigh...) */
-#define IS_VALID_INTNO(n) \
- ((n) > 0 && \
- /* autovec and ST-MFP ok anyway */ \
- (((n) < TTMFP_SOURCE_BASE) || \
- /* TT-MFP ok if present */ \
- ((n) >= TTMFP_SOURCE_BASE && (n) < SCC_SOURCE_BASE && \
- ATARIHW_PRESENT(TT_MFP)) || \
- /* SCC ok if present and number even */ \
- ((n) >= SCC_SOURCE_BASE && (n) < VME_SOURCE_BASE && \
- !((n) & 1) && ATARIHW_PRESENT(SCC)) || \
- /* greater numbers ok if they are registered VME vectors */ \
- ((n) >= VME_SOURCE_BASE && (n) < VME_SOURCE_BASE + VME_MAX_SOURCES && \
- free_vme_vec_bitmap & (1 << ((n) - VME_SOURCE_BASE)))))
-
-
-/*
- * Here start the assembler entry points for interrupts
- */
-
-#define IRQ_NAME(nr) atari_slow_irq_##nr##_handler(void)
-
-#define BUILD_SLOW_IRQ(n) \
-asmlinkage void IRQ_NAME(n); \
-/* Dummy function to allow asm with operands. */ \
-void atari_slow_irq_##n##_dummy (void) { \
-__asm__ (__ALIGN_STR "\n" \
-"atari_slow_irq_" #n "_handler:\t" \
-" addl %6,%5\n" /* preempt_count() += HARDIRQ_OFFSET */ \
- SAVE_ALL_INT "\n" \
- GET_CURRENT(%%d0) "\n" \
-" andb #~(1<<(%c3&7)),%a4:w\n" /* mask this interrupt */ \
- /* get old IPL from stack frame */ \
-" bfextu %%sp@(%c2){#5,#3},%%d0\n" \
-" movew %%sr,%%d1\n" \
-" bfins %%d0,%%d1{#21,#3}\n" \
-" movew %%d1,%%sr\n" /* set IPL = previous value */ \
-" addql #1,%a0\n" \
-" lea %a1,%%a0\n" \
-" pea %%sp@\n" /* push addr of frame */ \
-" movel %%a0@(4),%%sp@-\n" /* push handler data */ \
-" pea (%c3+8)\n" /* push int number */ \
-" movel %%a0@,%%a0\n" \
-" jbsr %%a0@\n" /* call the handler */ \
-" addql #8,%%sp\n" \
-" addql #4,%%sp\n" \
-" orw #0x0600,%%sr\n" \
-" andw #0xfeff,%%sr\n" /* set IPL = 6 again */ \
-" orb #(1<<(%c3&7)),%a4:w\n" /* now unmask the int again */ \
-" jbra ret_from_interrupt\n" \
- : : "i" (&kstat_cpu(0).irqs[n+8]), "i" (&irq_handler[n+8]), \
- "n" (PT_OFF_SR), "n" (n), \
- "i" (n & 8 ? (n & 16 ? &tt_mfp.int_mk_a : &st_mfp.int_mk_a) \
- : (n & 16 ? &tt_mfp.int_mk_b : &st_mfp.int_mk_b)), \
- "m" (preempt_count()), "di" (HARDIRQ_OFFSET) \
-); \
- for (;;); /* fake noreturn */ \
-}
-
-BUILD_SLOW_IRQ(0);
-BUILD_SLOW_IRQ(1);
-BUILD_SLOW_IRQ(2);
-BUILD_SLOW_IRQ(3);
-BUILD_SLOW_IRQ(4);
-BUILD_SLOW_IRQ(5);
-BUILD_SLOW_IRQ(6);
-BUILD_SLOW_IRQ(7);
-BUILD_SLOW_IRQ(8);
-BUILD_SLOW_IRQ(9);
-BUILD_SLOW_IRQ(10);
-BUILD_SLOW_IRQ(11);
-BUILD_SLOW_IRQ(12);
-BUILD_SLOW_IRQ(13);
-BUILD_SLOW_IRQ(14);
-BUILD_SLOW_IRQ(15);
-BUILD_SLOW_IRQ(16);
-BUILD_SLOW_IRQ(17);
-BUILD_SLOW_IRQ(18);
-BUILD_SLOW_IRQ(19);
-BUILD_SLOW_IRQ(20);
-BUILD_SLOW_IRQ(21);
-BUILD_SLOW_IRQ(22);
-BUILD_SLOW_IRQ(23);
-BUILD_SLOW_IRQ(24);
-BUILD_SLOW_IRQ(25);
-BUILD_SLOW_IRQ(26);
-BUILD_SLOW_IRQ(27);
-BUILD_SLOW_IRQ(28);
-BUILD_SLOW_IRQ(29);
-BUILD_SLOW_IRQ(30);
-BUILD_SLOW_IRQ(31);
-
-asm_irq_handler slow_handlers[32] = {
- [0] = atari_slow_irq_0_handler,
- [1] = atari_slow_irq_1_handler,
- [2] = atari_slow_irq_2_handler,
- [3] = atari_slow_irq_3_handler,
- [4] = atari_slow_irq_4_handler,
- [5] = atari_slow_irq_5_handler,
- [6] = atari_slow_irq_6_handler,
- [7] = atari_slow_irq_7_handler,
- [8] = atari_slow_irq_8_handler,
- [9] = atari_slow_irq_9_handler,
- [10] = atari_slow_irq_10_handler,
- [11] = atari_slow_irq_11_handler,
- [12] = atari_slow_irq_12_handler,
- [13] = atari_slow_irq_13_handler,
- [14] = atari_slow_irq_14_handler,
- [15] = atari_slow_irq_15_handler,
- [16] = atari_slow_irq_16_handler,
- [17] = atari_slow_irq_17_handler,
- [18] = atari_slow_irq_18_handler,
- [19] = atari_slow_irq_19_handler,
- [20] = atari_slow_irq_20_handler,
- [21] = atari_slow_irq_21_handler,
- [22] = atari_slow_irq_22_handler,
- [23] = atari_slow_irq_23_handler,
- [24] = atari_slow_irq_24_handler,
- [25] = atari_slow_irq_25_handler,
- [26] = atari_slow_irq_26_handler,
- [27] = atari_slow_irq_27_handler,
- [28] = atari_slow_irq_28_handler,
- [29] = atari_slow_irq_29_handler,
- [30] = atari_slow_irq_30_handler,
- [31] = atari_slow_irq_31_handler
-};
-
-asmlinkage void atari_fast_irq_handler( void );
-asmlinkage void atari_prio_irq_handler( void );
-
-/* Dummy function to allow asm with operands. */
-void atari_fast_prio_irq_dummy (void) {
-__asm__ (__ALIGN_STR "\n"
-"atari_fast_irq_handler:\n\t"
- "orw #0x700,%%sr\n" /* disable all interrupts */
-"atari_prio_irq_handler:\n\t"
- "addl %3,%2\n\t" /* preempt_count() += HARDIRQ_OFFSET */
- SAVE_ALL_INT "\n\t"
- GET_CURRENT(%%d0) "\n\t"
- /* get vector number from stack frame and convert to source */
- "bfextu %%sp@(%c1){#4,#10},%%d0\n\t"
- "subw #(0x40-8),%%d0\n\t"
- "jpl 1f\n\t"
- "addw #(0x40-8-0x18),%%d0\n"
- "1:\tlea %a0,%%a0\n\t"
- "addql #1,%%a0@(%%d0:l:4)\n\t"
- "lea irq_handler,%%a0\n\t"
- "lea %%a0@(%%d0:l:8),%%a0\n\t"
- "pea %%sp@\n\t" /* push frame address */
- "movel %%a0@(4),%%sp@-\n\t" /* push handler data */
- "movel %%d0,%%sp@-\n\t" /* push int number */
- "movel %%a0@,%%a0\n\t"
- "jsr %%a0@\n\t" /* and call the handler */
- "addql #8,%%sp\n\t"
- "addql #4,%%sp\n\t"
- "jbra ret_from_interrupt"
- : : "i" (&kstat_cpu(0).irqs), "n" (PT_OFF_FORMATVEC),
- "m" (preempt_count()), "di" (HARDIRQ_OFFSET)
-);
- for (;;);
-}
-#endif
/*
* Bitmap for free interrupt vector numbers
extern int atari_SCC_reset_done;
-static int atari_startup_irq(unsigned int irq)
+static unsigned int atari_irq_startup(struct irq_data *data)
{
- m68k_irq_startup(irq);
+ unsigned int irq = data->irq;
+
+ m68k_irq_startup(data);
atari_turnon_irq(irq);
atari_enable_irq(irq);
return 0;
}
-static void atari_shutdown_irq(unsigned int irq)
+static void atari_irq_shutdown(struct irq_data *data)
{
+ unsigned int irq = data->irq;
+
atari_disable_irq(irq);
atari_turnoff_irq(irq);
- m68k_irq_shutdown(irq);
+ m68k_irq_shutdown(data);
if (irq == IRQ_AUTO_4)
vectors[VEC_INT4] = falcon_hblhandler;
}
-static struct irq_controller atari_irq_controller = {
+static void atari_irq_enable(struct irq_data *data)
+{
+ atari_enable_irq(data->irq);
+}
+
+static void atari_irq_disable(struct irq_data *data)
+{
+ atari_disable_irq(data->irq);
+}
+
+static struct irq_chip atari_irq_chip = {
.name = "atari",
- .lock = __SPIN_LOCK_UNLOCKED(atari_irq_controller.lock),
- .startup = atari_startup_irq,
- .shutdown = atari_shutdown_irq,
- .enable = atari_enable_irq,
- .disable = atari_disable_irq,
+ .irq_startup = atari_irq_startup,
+ .irq_shutdown = atari_irq_shutdown,
+ .irq_enable = atari_irq_enable,
+ .irq_disable = atari_irq_disable,
};
/*
void __init atari_init_IRQ(void)
{
- m68k_setup_user_interrupt(VEC_USER, NUM_ATARI_SOURCES - IRQ_USER, NULL);
- m68k_setup_irq_controller(&atari_irq_controller, 1, NUM_ATARI_SOURCES - 1);
+ m68k_setup_user_interrupt(VEC_USER, NUM_ATARI_SOURCES - IRQ_USER);
+ m68k_setup_irq_controller(&atari_irq_chip, handle_simple_irq, 1,
+ NUM_ATARI_SOURCES - 1);
/* Initialize the MFP(s) */
#include <linux/rtc.h>
#include <linux/bcd.h>
#include <linux/delay.h>
+#include <linux/export.h>
#include <asm/atariints.h>
*/
static void __init bvme6000_init_IRQ(void)
{
- m68k_setup_user_interrupt(VEC_USER, 192, NULL);
+ m68k_setup_user_interrupt(VEC_USER, 192);
}
void __init config_bvme6000(void)
asm volatile(" movpw %0,%1@(5)" : : "d" (INTVAL), "a" (CLOCKBASE));
- if (request_irq(IRQ_AUTO_6, hp300_tick, IRQ_FLG_STD, "timer tick", vector))
+ if (request_irq(IRQ_AUTO_6, hp300_tick, 0, "timer tick", vector))
pr_err("Couldn't register timer interrupt\n");
out_8(CLOCKBASE + CLKCR2, 0x1); /* select CR1 */
#ifdef CONFIG_MMU
+static inline void ack_bad_irq(unsigned int irq)
+{
+ pr_crit("unexpected IRQ trap at vector %02x\n", irq);
+}
+
/* entry.S is sensitive to the offsets of these fields */
typedef struct {
unsigned int __softirq_pending;
#ifdef CONFIG_MMU
-#include <linux/linkage.h>
-#include <linux/hardirq.h>
-#include <linux/irqreturn.h>
-#include <linux/spinlock_types.h>
-
/*
* Interrupt source definitions
* General interrupt sources are the level 1-7.
#define IRQ_USER 8
-extern unsigned int irq_canonicalize(unsigned int irq);
-
-struct pt_regs;
-
/*
* various flags for request_irq() - the Amiga now uses the standard
* mechanism like all other architectures - IRQF_DISABLED and
#define IRQ_FLG_STD (0x8000) /* internally used */
#endif
-/*
- * This structure is used to chain together the ISRs for a particular
- * interrupt source (if it supports chaining).
- */
-typedef struct irq_node {
- irqreturn_t (*handler)(int, void *);
- void *dev_id;
- struct irq_node *next;
- unsigned long flags;
- const char *devname;
-} irq_node_t;
-
-/*
- * This structure has only 4 elements for speed reasons
- */
-struct irq_handler {
- int (*handler)(int, void *);
- unsigned long flags;
- void *dev_id;
- const char *devname;
-};
-
-struct irq_controller {
- const char *name;
- spinlock_t lock;
- int (*startup)(unsigned int irq);
- void (*shutdown)(unsigned int irq);
- void (*enable)(unsigned int irq);
- void (*disable)(unsigned int irq);
-};
-
-extern int m68k_irq_startup(unsigned int);
-extern void m68k_irq_shutdown(unsigned int);
-
-/*
- * This function returns a new irq_node_t
- */
-extern irq_node_t *new_irq_node(void);
+struct irq_data;
+struct irq_chip;
+struct irq_desc;
+extern unsigned int m68k_irq_startup(struct irq_data *data);
+extern unsigned int m68k_irq_startup_irq(unsigned int irq);
+extern void m68k_irq_shutdown(struct irq_data *data);
+extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int,
+ struct pt_regs *));
+extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt);
+extern void m68k_setup_irq_controller(struct irq_chip *,
+ void (*handle)(unsigned int irq,
+ struct irq_desc *desc),
+ unsigned int irq, unsigned int cnt);
-extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *));
-extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt,
- void (*handler)(unsigned int, struct pt_regs *));
-extern void m68k_setup_irq_controller(struct irq_controller *, unsigned int, unsigned int);
-
-asmlinkage void m68k_handle_int(unsigned int);
-asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *);
+extern unsigned int irq_canonicalize(unsigned int irq);
#else
#define irq_canonicalize(irq) (irq)
#endif /* CONFIG_MMU */
asmlinkage void do_IRQ(int irq, struct pt_regs *regs);
+extern atomic_t irq_err_count;
#endif /* _M68K_IRQ_H_ */
extern void mac_poweroff(void);
extern void mac_init_IRQ(void);
extern int mac_irq_pending(unsigned int);
+extern void mac_irq_enable(struct irq_data *data);
+extern void mac_irq_disable(struct irq_data *data);
/*
* Floppy driver magic hook - probably shouldn't be here
#define Q40_IRQ10_MASK (1<<5)
#define Q40_IRQ14_MASK (1<<6)
#define Q40_IRQ15_MASK (1<<7)
-
-extern unsigned long q40_probe_irq_on (void);
-extern int q40_probe_irq_off (unsigned long irqs);
extra-$(CONFIG_SUN3) := sun3-head.o
extra-y += vmlinux.lds
-obj-y := entry.o m68k_ksyms.o module.o process.o ptrace.o setup.o signal.o \
- sys_m68k.o syscalltable.o time.o traps.o
+obj-y := entry.o irq.o m68k_ksyms.o module.o process.o ptrace.o setup.o \
+ signal.o sys_m68k.o syscalltable.o time.o traps.o
-obj-$(CONFIG_MMU) += ints.o devres.o vectors.o
-devres-$(CONFIG_MMU) = ../../../kernel/irq/devres.o
+obj-$(CONFIG_MMU) += ints.o vectors.o
ifndef CONFIG_MMU_SUN3
obj-y += dma.o
endif
ifndef CONFIG_MMU
-obj-y += init_task.o irq.o
+obj-y += init_task.o
endif
#include <linux/scatterlist.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
+#include <linux/export.h>
#include <asm/pgalloc.h>
#include <linux/mm.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
+#include <linux/export.h>
#include <asm/cacheflush.h>
void *dma_alloc_coherent(struct device *dev, size_t size,
.globl sys_fork, sys_clone, sys_vfork
.globl ret_from_interrupt, bad_interrupt
.globl auto_irqhandler_fixup
-.globl user_irqvec_fixup, user_irqhandler_fixup
+.globl user_irqvec_fixup
.text
ENTRY(buserr)
movel %sp,%sp@-
movel %d0,%sp@- | put vector # on stack
auto_irqhandler_fixup = . + 2
- jsr __m68k_handle_int | process the IRQ
+ jsr do_IRQ | process the IRQ
addql #8,%sp | pop parameters off stack
ret_from_interrupt:
movel %sp,%sp@-
movel %d0,%sp@- | put vector # on stack
-user_irqhandler_fixup = . + 2
- jsr __m68k_handle_int | process the IRQ
+ jsr do_IRQ | process the IRQ
addql #8,%sp | pop parameters off stack
subqb #1,%curptr@(TASK_INFO+TINFO_PREEMPT+1)
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
- *
- * 07/03/96: Timer initialization, and thus mach_sched_init(),
- * removed from request_irq() and moved to init_time().
- * We should therefore consider renaming our add_isr() and
- * remove_isr() to request_irq() and free_irq()
- * respectively, so they are compliant with the other
- * architectures. /Jes
- * 11/07/96: Changed all add_/remove_isr() to request_/free_irq() calls.
- * Removed irq list support, if any machine needs an irq server
- * it must implement this itself (as it's already done), instead
- * only default handler are used with mach_default_handler.
- * request_irq got some flags different from other architectures:
- * - IRQ_FLG_REPLACE : Replace an existing handler (the default one
- * can be replaced without this flag)
- * - IRQ_FLG_LOCK : handler can't be replaced
- * There are other machine depending flags, see there
- * If you want to replace a default handler you should know what
- * you're doing, since it might handle different other irq sources
- * which must be served /Roman Zippel
*/
#include <linux/module.h>
#endif
extern u32 auto_irqhandler_fixup[];
-extern u32 user_irqhandler_fixup[];
extern u16 user_irqvec_fixup[];
-/* table for system interrupt handlers */
-static struct irq_node *irq_list[NR_IRQS];
-static struct irq_controller *irq_controller[NR_IRQS];
-static int irq_depth[NR_IRQS];
-
static int m68k_first_user_vec;
-static struct irq_controller auto_irq_controller = {
+static struct irq_chip auto_irq_chip = {
.name = "auto",
- .lock = __SPIN_LOCK_UNLOCKED(auto_irq_controller.lock),
- .startup = m68k_irq_startup,
- .shutdown = m68k_irq_shutdown,
+ .irq_startup = m68k_irq_startup,
+ .irq_shutdown = m68k_irq_shutdown,
};
-static struct irq_controller user_irq_controller = {
+static struct irq_chip user_irq_chip = {
.name = "user",
- .lock = __SPIN_LOCK_UNLOCKED(user_irq_controller.lock),
- .startup = m68k_irq_startup,
- .shutdown = m68k_irq_shutdown,
+ .irq_startup = m68k_irq_startup,
+ .irq_shutdown = m68k_irq_shutdown,
};
-#define NUM_IRQ_NODES 100
-static irq_node_t nodes[NUM_IRQ_NODES];
-
/*
* void init_IRQ(void)
*
}
for (i = IRQ_AUTO_1; i <= IRQ_AUTO_7; i++)
- irq_controller[i] = &auto_irq_controller;
+ irq_set_chip_and_handler(i, &auto_irq_chip, handle_simple_irq);
mach_init_IRQ();
}
* @handler: called from auto vector interrupts
*
* setup the handler to be called from auto vector interrupts instead of the
- * standard __m68k_handle_int(), it will be called with irq numbers in the range
+ * standard do_IRQ(), it will be called with irq numbers in the range
* from IRQ_AUTO_1 - IRQ_AUTO_7.
*/
void __init m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *))
* m68k_setup_user_interrupt
* @vec: first user vector interrupt to handle
* @cnt: number of active user vector interrupts
- * @handler: called from user vector interrupts
*
* setup user vector interrupts, this includes activating the specified range
* of interrupts, only then these interrupts can be requested (note: this is
- * different from auto vector interrupts). An optional handler can be installed
- * to be called instead of the default __m68k_handle_int(), it will be called
- * with irq numbers starting from IRQ_USER.
+ * different from auto vector interrupts).
*/
-void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt,
- void (*handler)(unsigned int, struct pt_regs *))
+void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt)
{
int i;
BUG_ON(IRQ_USER + cnt > NR_IRQS);
m68k_first_user_vec = vec;
for (i = 0; i < cnt; i++)
- irq_controller[IRQ_USER + i] = &user_irq_controller;
+ irq_set_chip(IRQ_USER + i, &user_irq_chip);
*user_irqvec_fixup = vec - IRQ_USER;
- if (handler)
- *user_irqhandler_fixup = (u32)handler;
flush_icache();
}
/**
* m68k_setup_irq_controller
- * @contr: irq controller which controls specified irq
+ * @chip: irq chip which controls specified irq
+ * @handle: flow handler which handles specified irq
* @irq: first irq to be managed by the controller
+ * @cnt: number of irqs to be managed by the controller
*
* Change the controller for the specified range of irq, which will be used to
* manage these irq. auto/user irq already have a default controller, which can
* be changed as well, but the controller probably should use m68k_irq_startup/
* m68k_irq_shutdown.
*/
-void m68k_setup_irq_controller(struct irq_controller *contr, unsigned int irq,
+void m68k_setup_irq_controller(struct irq_chip *chip,
+ irq_flow_handler_t handle, unsigned int irq,
unsigned int cnt)
{
int i;
- for (i = 0; i < cnt; i++)
- irq_controller[irq + i] = contr;
-}
-
-irq_node_t *new_irq_node(void)
-{
- irq_node_t *node;
- short i;
-
- for (node = nodes, i = NUM_IRQ_NODES-1; i >= 0; node++, i--) {
- if (!node->handler) {
- memset(node, 0, sizeof(*node));
- return node;
- }
+ for (i = 0; i < cnt; i++) {
+ irq_set_chip(irq + i, chip);
+ if (handle)
+ irq_set_handler(irq + i, handle);
}
-
- printk ("new_irq_node: out of nodes\n");
- return NULL;
}
-int setup_irq(unsigned int irq, struct irq_node *node)
-{
- struct irq_controller *contr;
- struct irq_node **prev;
- unsigned long flags;
-
- if (irq >= NR_IRQS || !(contr = irq_controller[irq])) {
- printk("%s: Incorrect IRQ %d from %s\n",
- __func__, irq, node->devname);
- return -ENXIO;
- }
-
- spin_lock_irqsave(&contr->lock, flags);
-
- prev = irq_list + irq;
- if (*prev) {
- /* Can't share interrupts unless both agree to */
- if (!((*prev)->flags & node->flags & IRQF_SHARED)) {
- spin_unlock_irqrestore(&contr->lock, flags);
- return -EBUSY;
- }
- while (*prev)
- prev = &(*prev)->next;
- }
-
- if (!irq_list[irq]) {
- if (contr->startup)
- contr->startup(irq);
- else
- contr->enable(irq);
- }
- node->next = NULL;
- *prev = node;
-
- spin_unlock_irqrestore(&contr->lock, flags);
-
- return 0;
-}
-
-int request_irq(unsigned int irq,
- irq_handler_t handler,
- unsigned long flags, const char *devname, void *dev_id)
-{
- struct irq_node *node;
- int res;
-
- node = new_irq_node();
- if (!node)
- return -ENOMEM;
-
- node->handler = handler;
- node->flags = flags;
- node->dev_id = dev_id;
- node->devname = devname;
-
- res = setup_irq(irq, node);
- if (res)
- node->handler = NULL;
-
- return res;
-}
-
-EXPORT_SYMBOL(request_irq);
-
-void free_irq(unsigned int irq, void *dev_id)
-{
- struct irq_controller *contr;
- struct irq_node **p, *node;
- unsigned long flags;
-
- if (irq >= NR_IRQS || !(contr = irq_controller[irq])) {
- printk("%s: Incorrect IRQ %d\n", __func__, irq);
- return;
- }
-
- spin_lock_irqsave(&contr->lock, flags);
-
- p = irq_list + irq;
- while ((node = *p)) {
- if (node->dev_id == dev_id)
- break;
- p = &node->next;
- }
-
- if (node) {
- *p = node->next;
- node->handler = NULL;
- } else
- printk("%s: Removing probably wrong IRQ %d\n",
- __func__, irq);
-
- if (!irq_list[irq]) {
- if (contr->shutdown)
- contr->shutdown(irq);
- else
- contr->disable(irq);
- }
-
- spin_unlock_irqrestore(&contr->lock, flags);
-}
-
-EXPORT_SYMBOL(free_irq);
-
-void enable_irq(unsigned int irq)
-{
- struct irq_controller *contr;
- unsigned long flags;
-
- if (irq >= NR_IRQS || !(contr = irq_controller[irq])) {
- printk("%s: Incorrect IRQ %d\n",
- __func__, irq);
- return;
- }
-
- spin_lock_irqsave(&contr->lock, flags);
- if (irq_depth[irq]) {
- if (!--irq_depth[irq]) {
- if (contr->enable)
- contr->enable(irq);
- }
- } else
- WARN_ON(1);
- spin_unlock_irqrestore(&contr->lock, flags);
-}
-
-EXPORT_SYMBOL(enable_irq);
-
-void disable_irq(unsigned int irq)
-{
- struct irq_controller *contr;
- unsigned long flags;
-
- if (irq >= NR_IRQS || !(contr = irq_controller[irq])) {
- printk("%s: Incorrect IRQ %d\n",
- __func__, irq);
- return;
- }
-
- spin_lock_irqsave(&contr->lock, flags);
- if (!irq_depth[irq]++) {
- if (contr->disable)
- contr->disable(irq);
- }
- spin_unlock_irqrestore(&contr->lock, flags);
-}
-
-EXPORT_SYMBOL(disable_irq);
-
-void disable_irq_nosync(unsigned int irq) __attribute__((alias("disable_irq")));
-
-EXPORT_SYMBOL(disable_irq_nosync);
-
-int m68k_irq_startup(unsigned int irq)
+unsigned int m68k_irq_startup_irq(unsigned int irq)
{
if (irq <= IRQ_AUTO_7)
vectors[VEC_SPUR + irq] = auto_inthandler;
return 0;
}
-void m68k_irq_shutdown(unsigned int irq)
+unsigned int m68k_irq_startup(struct irq_data *data)
{
- if (irq <= IRQ_AUTO_7)
- vectors[VEC_SPUR + irq] = bad_inthandler;
- else
- vectors[m68k_first_user_vec + irq - IRQ_USER] = bad_inthandler;
+ return m68k_irq_startup_irq(data->irq);
}
-
-/*
- * Do we need these probe functions on the m68k?
- *
- * ... may be useful with ISA devices
- */
-unsigned long probe_irq_on (void)
+void m68k_irq_shutdown(struct irq_data *data)
{
-#ifdef CONFIG_Q40
- if (MACH_IS_Q40)
- return q40_probe_irq_on();
-#endif
- return 0;
-}
+ unsigned int irq = data->irq;
-EXPORT_SYMBOL(probe_irq_on);
-
-int probe_irq_off (unsigned long irqs)
-{
-#ifdef CONFIG_Q40
- if (MACH_IS_Q40)
- return q40_probe_irq_off(irqs);
-#endif
- return 0;
+ if (irq <= IRQ_AUTO_7)
+ vectors[VEC_SPUR + irq] = bad_inthandler;
+ else
+ vectors[m68k_first_user_vec + irq - IRQ_USER] = bad_inthandler;
}
-EXPORT_SYMBOL(probe_irq_off);
unsigned int irq_canonicalize(unsigned int irq)
{
EXPORT_SYMBOL(irq_canonicalize);
-asmlinkage void m68k_handle_int(unsigned int irq)
-{
- struct irq_node *node;
- kstat_cpu(0).irqs[irq]++;
- node = irq_list[irq];
- do {
- node->handler(irq, node->dev_id);
- node = node->next;
- } while (node);
-}
-
-asmlinkage void __m68k_handle_int(unsigned int irq, struct pt_regs *regs)
-{
- struct pt_regs *old_regs;
- old_regs = set_irq_regs(regs);
- m68k_handle_int(irq);
- set_irq_regs(old_regs);
-}
asmlinkage void handle_badint(struct pt_regs *regs)
{
- kstat_cpu(0).irqs[0]++;
- printk("unexpected interrupt from %u\n", regs->vector);
-}
-
-int show_interrupts(struct seq_file *p, void *v)
-{
- struct irq_controller *contr;
- struct irq_node *node;
- int i = *(loff_t *) v;
-
- /* autovector interrupts */
- if (irq_list[i]) {
- contr = irq_controller[i];
- node = irq_list[i];
- seq_printf(p, "%-8s %3u: %10u %s", contr->name, i, kstat_cpu(0).irqs[i], node->devname);
- while ((node = node->next))
- seq_printf(p, ", %s", node->devname);
- seq_puts(p, "\n");
- }
- return 0;
-}
-
-#ifdef CONFIG_PROC_FS
-void init_irq_proc(void)
-{
- /* Insert /proc/irq driver here */
+ atomic_inc(&irq_err_count);
+ pr_warn("unexpected interrupt from %u\n", regs->vector);
}
-#endif
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/init.h>
+#include <linux/irq.h>
#include <asm/traps.h>
#include <asm/bootinfo.h>
/* #define DEBUG_IRQS */
-extern void mac_enable_irq(unsigned int);
-extern void mac_disable_irq(unsigned int);
-
int baboon_present;
static volatile struct baboon *baboon;
static unsigned char baboon_disabled;
* Baboon interrupt handler. This works a lot like a VIA.
*/
-static irqreturn_t baboon_irq(int irq, void *dev_id)
+static void baboon_irq(unsigned int irq, struct irq_desc *desc)
{
int irq_bit, irq_num;
unsigned char events;
(uint) baboon->mb_status);
#endif
- if (!(events = baboon->mb_ifr & 0x07))
- return IRQ_NONE;
+ events = baboon->mb_ifr & 0x07;
+ if (!events)
+ return;
irq_num = IRQ_BABOON_0;
irq_bit = 1;
do {
if (events & irq_bit) {
baboon->mb_ifr &= ~irq_bit;
- m68k_handle_int(irq_num);
+ generic_handle_irq(irq_num);
}
irq_bit <<= 1;
irq_num++;
/* for now we need to smash all interrupts */
baboon->mb_ifr &= ~events;
#endif
- return IRQ_HANDLED;
}
/*
void __init baboon_register_interrupts(void)
{
baboon_disabled = 0;
- if (request_irq(IRQ_NUBUS_C, baboon_irq, 0, "baboon", (void *)baboon))
- pr_err("Couldn't register baboon interrupt\n");
+ irq_set_chained_handler(IRQ_NUBUS_C, baboon_irq);
}
/*
baboon_disabled &= ~(1 << irq_idx);
if (!baboon_disabled)
- mac_enable_irq(IRQ_NUBUS_C);
+ mac_irq_enable(irq_get_irq_data(IRQ_NUBUS_C));
}
void baboon_irq_disable(int irq)
baboon_disabled |= 1 << irq_idx;
if (baboon_disabled)
- mac_disable_irq(IRQ_NUBUS_C);
+ mac_irq_disable(irq_get_irq_data(IRQ_NUBUS_C));
}
void baboon_irq_clear(int irq)
{
if (iop_ism_present) {
if (oss_present) {
- if (request_irq(OSS_IRQLEV_IOPISM, iop_ism_irq,
- IRQ_FLG_LOCK, "ISM IOP",
- (void *) IOP_NUM_ISM))
+ if (request_irq(OSS_IRQLEV_IOPISM, iop_ism_irq, 0,
+ "ISM IOP", (void *)IOP_NUM_ISM))
pr_err("Couldn't register ISM IOP interrupt\n");
oss_irq_enable(IRQ_MAC_ADB);
} else {
- if (request_irq(IRQ_VIA2_0, iop_ism_irq,
- IRQ_FLG_LOCK|IRQ_FLG_FAST, "ISM IOP",
- (void *) IOP_NUM_ISM))
+ if (request_irq(IRQ_VIA2_0, iop_ism_irq, 0, "ISM IOP",
+ (void *)IOP_NUM_ISM))
pr_err("Couldn't register ISM IOP interrupt\n");
}
if (!iop_alive(iop_base[IOP_NUM_ISM])) {
/* #define DEBUG_MACINTS */
-void mac_enable_irq(unsigned int irq);
-void mac_disable_irq(unsigned int irq);
-
-static struct irq_controller mac_irq_controller = {
+static struct irq_chip mac_irq_chip = {
.name = "mac",
- .lock = __SPIN_LOCK_UNLOCKED(mac_irq_controller.lock),
- .enable = mac_enable_irq,
- .disable = mac_disable_irq,
+ .irq_enable = mac_irq_enable,
+ .irq_disable = mac_irq_disable,
};
void __init mac_init_IRQ(void)
#ifdef DEBUG_MACINTS
printk("mac_init_IRQ(): Setting things up...\n");
#endif
- m68k_setup_irq_controller(&mac_irq_controller, IRQ_USER,
+ m68k_setup_irq_controller(&mac_irq_chip, handle_simple_irq, IRQ_USER,
NUM_MAC_SOURCES - IRQ_USER);
/* Make sure the SONIC interrupt is cleared or things get ugly */
#ifdef SHUTUP_SONIC
}
/*
- * mac_enable_irq - enable an interrupt source
- * mac_disable_irq - disable an interrupt source
+ * mac_irq_enable - enable an interrupt source
+ * mac_irq_disable - disable an interrupt source
* mac_clear_irq - clears a pending interrupt
- * mac_pending_irq - Returns the pending status of an IRQ (nonzero = pending)
+ * mac_irq_pending - returns the pending status of an IRQ (nonzero = pending)
*
* These routines are just dispatchers to the VIA/OSS/PSC routines.
*/
-void mac_enable_irq(unsigned int irq)
+void mac_irq_enable(struct irq_data *data)
{
+ int irq = data->irq;
int irq_src = IRQ_SRC(irq);
switch(irq_src) {
}
}
-void mac_disable_irq(unsigned int irq)
+void mac_irq_disable(struct irq_data *data)
{
+ int irq = data->irq;
int irq_src = IRQ_SRC(irq);
switch(irq_src) {
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/init.h>
+#include <linux/irq.h>
#include <asm/bootinfo.h>
#include <asm/macintosh.h>
int oss_present;
volatile struct mac_oss *oss;
-static irqreturn_t oss_irq(int, void *);
-static irqreturn_t oss_nubus_irq(int, void *);
-
-extern irqreturn_t via1_irq(int, void *);
+extern void via1_irq(unsigned int irq, struct irq_desc *desc);
/*
* Initialize the OSS
oss->irq_level[OSS_VIA1] = OSS_IRQLEV_VIA1;
}
-/*
- * Register the OSS and NuBus interrupt dispatchers.
- */
-
-void __init oss_register_interrupts(void)
-{
- if (request_irq(OSS_IRQLEV_SCSI, oss_irq, IRQ_FLG_LOCK,
- "scsi", (void *) oss))
- pr_err("Couldn't register %s interrupt\n", "scsi");
- if (request_irq(OSS_IRQLEV_NUBUS, oss_nubus_irq, IRQ_FLG_LOCK,
- "nubus", (void *) oss))
- pr_err("Couldn't register %s interrupt\n", "nubus");
- if (request_irq(OSS_IRQLEV_SOUND, oss_irq, IRQ_FLG_LOCK,
- "sound", (void *) oss))
- pr_err("Couldn't register %s interrupt\n", "sound");
- if (request_irq(OSS_IRQLEV_VIA1, via1_irq, IRQ_FLG_LOCK,
- "via1", (void *) via1))
- pr_err("Couldn't register %s interrupt\n", "via1");
-}
-
/*
* Initialize OSS for Nubus access
*/
* and SCSI; everything else is routed to its own autovector IRQ.
*/
-static irqreturn_t oss_irq(int irq, void *dev_id)
+static void oss_irq(unsigned int irq, struct irq_desc *desc)
{
int events;
events = oss->irq_pending & (OSS_IP_SOUND|OSS_IP_SCSI);
if (!events)
- return IRQ_NONE;
+ return;
#ifdef DEBUG_IRQS
if ((console_loglevel == 10) && !(events & OSS_IP_SCSI)) {
- printk("oss_irq: irq %d events = 0x%04X\n", irq,
+ printk("oss_irq: irq %u events = 0x%04X\n", irq,
(int) oss->irq_pending);
}
#endif
/* FIXME: call sound handler */
} else if (events & OSS_IP_SCSI) {
oss->irq_pending &= ~OSS_IP_SCSI;
- m68k_handle_int(IRQ_MAC_SCSI);
+ generic_handle_irq(IRQ_MAC_SCSI);
} else {
/* FIXME: error check here? */
}
- return IRQ_HANDLED;
}
/*
* Unlike the VIA/RBV this is on its own autovector interrupt level.
*/
-static irqreturn_t oss_nubus_irq(int irq, void *dev_id)
+static void oss_nubus_irq(unsigned int irq, struct irq_desc *desc)
{
int events, irq_bit, i;
events = oss->irq_pending & OSS_IP_NUBUS;
if (!events)
- return IRQ_NONE;
+ return;
#ifdef DEBUG_NUBUS_INT
if (console_loglevel > 7) {
irq_bit >>= 1;
if (events & irq_bit) {
oss->irq_pending &= ~irq_bit;
- m68k_handle_int(NUBUS_SOURCE_BASE + i);
+ generic_handle_irq(NUBUS_SOURCE_BASE + i);
}
} while(events & (irq_bit - 1));
- return IRQ_HANDLED;
+}
+
+/*
+ * Register the OSS and NuBus interrupt dispatchers.
+ */
+
+void __init oss_register_interrupts(void)
+{
+ irq_set_chained_handler(OSS_IRQLEV_SCSI, oss_irq);
+ irq_set_chained_handler(OSS_IRQLEV_NUBUS, oss_nubus_irq);
+ irq_set_chained_handler(OSS_IRQLEV_SOUND, oss_irq);
+ irq_set_chained_handler(OSS_IRQLEV_VIA1, via1_irq);
}
/*
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/init.h>
+#include <linux/irq.h>
#include <asm/traps.h>
#include <asm/bootinfo.h>
int psc_present;
volatile __u8 *psc;
-irqreturn_t psc_irq(int, void *);
-
/*
* Debugging dump, used in various places to see what's going on.
*/
}
}
-/*
- * Register the PSC interrupt dispatchers for autovector interrupts 3-6.
- */
-
-void __init psc_register_interrupts(void)
-{
- if (request_irq(IRQ_AUTO_3, psc_irq, 0, "psc3", (void *) 0x30))
- pr_err("Couldn't register psc%d interrupt\n", 3);
- if (request_irq(IRQ_AUTO_4, psc_irq, 0, "psc4", (void *) 0x40))
- pr_err("Couldn't register psc%d interrupt\n", 4);
- if (request_irq(IRQ_AUTO_5, psc_irq, 0, "psc5", (void *) 0x50))
- pr_err("Couldn't register psc%d interrupt\n", 5);
- if (request_irq(IRQ_AUTO_6, psc_irq, 0, "psc6", (void *) 0x60))
- pr_err("Couldn't register psc%d interrupt\n", 6);
-}
-
/*
* PSC interrupt handler. It's a lot like the VIA interrupt handler.
*/
-irqreturn_t psc_irq(int irq, void *dev_id)
+static void psc_irq(unsigned int irq, struct irq_desc *desc)
{
- int pIFR = pIFRbase + ((int) dev_id);
- int pIER = pIERbase + ((int) dev_id);
+ unsigned int offset = (unsigned int)irq_desc_get_handler_data(desc);
+ int pIFR = pIFRbase + offset;
+ int pIER = pIERbase + offset;
int irq_num;
unsigned char irq_bit, events;
#ifdef DEBUG_IRQS
- printk("psc_irq: irq %d pIFR = 0x%02X pIER = 0x%02X\n",
+ printk("psc_irq: irq %u pIFR = 0x%02X pIER = 0x%02X\n",
irq, (int) psc_read_byte(pIFR), (int) psc_read_byte(pIER));
#endif
events = psc_read_byte(pIFR) & psc_read_byte(pIER) & 0xF;
if (!events)
- return IRQ_NONE;
+ return;
irq_num = irq << 3;
irq_bit = 1;
do {
if (events & irq_bit) {
psc_write_byte(pIFR, irq_bit);
- m68k_handle_int(irq_num);
+ generic_handle_irq(irq_num);
}
irq_num++;
irq_bit <<= 1;
} while (events >= irq_bit);
- return IRQ_HANDLED;
+}
+
+/*
+ * Register the PSC interrupt dispatchers for autovector interrupts 3-6.
+ */
+
+void __init psc_register_interrupts(void)
+{
+ irq_set_chained_handler(IRQ_AUTO_3, psc_irq);
+ irq_set_handler_data(IRQ_AUTO_3, (void *)0x30);
+ irq_set_chained_handler(IRQ_AUTO_4, psc_irq);
+ irq_set_handler_data(IRQ_AUTO_4, (void *)0x40);
+ irq_set_chained_handler(IRQ_AUTO_5, psc_irq);
+ irq_set_handler_data(IRQ_AUTO_5, (void *)0x50);
+ irq_set_chained_handler(IRQ_AUTO_6, psc_irq);
+ irq_set_handler_data(IRQ_AUTO_6, (void *)0x60);
}
void psc_irq_enable(int irq) {
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/irq.h>
#include <asm/bootinfo.h>
#include <asm/macintosh.h>
static u8 nubus_disabled;
void via_debug_dump(void);
-irqreturn_t via1_irq(int, void *);
-irqreturn_t via2_irq(int, void *);
-irqreturn_t via_nubus_irq(int, void *);
void via_irq_enable(int irq);
void via_irq_disable(int irq);
void via_irq_clear(int irq);
via1[vT1CL] = MAC_CLOCK_LOW;
via1[vT1CH] = MAC_CLOCK_HIGH;
- if (request_irq(IRQ_MAC_TIMER_1, func, IRQ_FLG_LOCK, "timer", func))
+ if (request_irq(IRQ_MAC_TIMER_1, func, 0, "timer", func))
pr_err("Couldn't register %s interrupt\n", "timer");
}
-/*
- * Register the interrupt dispatchers for VIA or RBV machines only.
- */
-
-void __init via_register_interrupts(void)
-{
- if (via_alt_mapping) {
- if (request_irq(IRQ_AUTO_1, via1_irq,
- IRQ_FLG_LOCK|IRQ_FLG_FAST, "software",
- (void *) via1))
- pr_err("Couldn't register %s interrupt\n", "software");
- if (request_irq(IRQ_AUTO_6, via1_irq,
- IRQ_FLG_LOCK|IRQ_FLG_FAST, "via1",
- (void *) via1))
- pr_err("Couldn't register %s interrupt\n", "via1");
- } else {
- if (request_irq(IRQ_AUTO_1, via1_irq,
- IRQ_FLG_LOCK|IRQ_FLG_FAST, "via1",
- (void *) via1))
- pr_err("Couldn't register %s interrupt\n", "via1");
- }
- if (request_irq(IRQ_AUTO_2, via2_irq, IRQ_FLG_LOCK|IRQ_FLG_FAST,
- "via2", (void *) via2))
- pr_err("Couldn't register %s interrupt\n", "via2");
- if (request_irq(IRQ_MAC_NUBUS, via_nubus_irq,
- IRQ_FLG_LOCK|IRQ_FLG_FAST, "nubus", (void *) via2))
- pr_err("Couldn't register %s interrupt\n", "nubus");
-}
-
/*
* Debugging dump, used in various places to see what's going on.
*/
* via6522.c :-), disable/pending masks added.
*/
-irqreturn_t via1_irq(int irq, void *dev_id)
+void via1_irq(unsigned int irq, struct irq_desc *desc)
{
int irq_num;
unsigned char irq_bit, events;
events = via1[vIFR] & via1[vIER] & 0x7F;
if (!events)
- return IRQ_NONE;
+ return;
irq_num = VIA1_SOURCE_BASE;
irq_bit = 1;
do {
if (events & irq_bit) {
via1[vIFR] = irq_bit;
- m68k_handle_int(irq_num);
+ generic_handle_irq(irq_num);
}
++irq_num;
irq_bit <<= 1;
} while (events >= irq_bit);
- return IRQ_HANDLED;
}
-irqreturn_t via2_irq(int irq, void *dev_id)
+static void via2_irq(unsigned int irq, struct irq_desc *desc)
{
int irq_num;
unsigned char irq_bit, events;
events = via2[gIFR] & via2[gIER] & 0x7F;
if (!events)
- return IRQ_NONE;
+ return;
irq_num = VIA2_SOURCE_BASE;
irq_bit = 1;
do {
if (events & irq_bit) {
via2[gIFR] = irq_bit | rbv_clear;
- m68k_handle_int(irq_num);
+ generic_handle_irq(irq_num);
}
++irq_num;
irq_bit <<= 1;
} while (events >= irq_bit);
- return IRQ_HANDLED;
}
/*
* VIA2 dispatcher as a fast interrupt handler.
*/
-irqreturn_t via_nubus_irq(int irq, void *dev_id)
+void via_nubus_irq(unsigned int irq, struct irq_desc *desc)
{
int slot_irq;
unsigned char slot_bit, events;
else
events &= ~via2[vDirA];
if (!events)
- return IRQ_NONE;
+ return;
do {
slot_irq = IRQ_NUBUS_F;
do {
if (events & slot_bit) {
events &= ~slot_bit;
- m68k_handle_int(slot_irq);
+ generic_handle_irq(slot_irq);
}
--slot_irq;
slot_bit >>= 1;
else
events &= ~via2[vDirA];
} while (events);
- return IRQ_HANDLED;
+}
+
+/*
+ * Register the interrupt dispatchers for VIA or RBV machines only.
+ */
+
+void __init via_register_interrupts(void)
+{
+ if (via_alt_mapping) {
+ /* software interrupt */
+ irq_set_chained_handler(IRQ_AUTO_1, via1_irq);
+ /* via1 interrupt */
+ irq_set_chained_handler(IRQ_AUTO_6, via1_irq);
+ } else {
+ irq_set_chained_handler(IRQ_AUTO_1, via1_irq);
+ }
+ irq_set_chained_handler(IRQ_AUTO_2, via2_irq);
+ irq_set_chained_handler(IRQ_MAC_NUBUS, via_nubus_irq);
}
void via_irq_enable(int irq) {
void __init mvme147_init_IRQ(void)
{
- m68k_setup_user_interrupt(VEC_USER, 192, NULL);
+ m68k_setup_user_interrupt(VEC_USER, 192);
}
void __init config_mvme147(void)
void mvme147_sched_init (irq_handler_t timer_routine)
{
tick_handler = timer_routine;
- if (request_irq(PCC_IRQ_TIMER1, mvme147_timer_int, IRQ_FLG_REPLACE,
- "timer 1", NULL))
+ if (request_irq(PCC_IRQ_TIMER1, mvme147_timer_int, 0, "timer 1", NULL))
pr_err("Couldn't register timer interrupt\n");
/* Init the clock with a value */
static void __init mvme16x_init_IRQ (void)
{
- m68k_setup_user_interrupt(VEC_USER, 192, NULL);
+ m68k_setup_user_interrupt(VEC_USER, 192);
}
#define pcc2chip ((volatile u_char *)0xfff42000)
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
+#include <linux/irq.h>
#include <asm/ptrace.h>
#include <asm/system.h>
-#include <asm/irq.h>
#include <asm/traps.h>
#include <asm/q40_master.h>
*/
static void q40_irq_handler(unsigned int, struct pt_regs *fp);
-static void q40_enable_irq(unsigned int);
-static void q40_disable_irq(unsigned int);
+static void q40_irq_enable(struct irq_data *data);
+static void q40_irq_disable(struct irq_data *data);
unsigned short q40_ablecount[35];
unsigned short q40_state[35];
-static int q40_irq_startup(unsigned int irq)
+static unsigned int q40_irq_startup(struct irq_data *data)
{
+ unsigned int irq = data->irq;
+
/* test for ISA ints not implemented by HW */
switch (irq) {
case 1: case 2: case 8: case 9:
case 11: case 12: case 13:
printk("%s: ISA IRQ %d not implemented by HW\n", __func__, irq);
- return -ENXIO;
+ /* FIXME return -ENXIO; */
}
return 0;
}
-static void q40_irq_shutdown(unsigned int irq)
+static void q40_irq_shutdown(struct irq_data *data)
{
}
-static struct irq_controller q40_irq_controller = {
+static struct irq_chip q40_irq_chip = {
.name = "q40",
- .lock = __SPIN_LOCK_UNLOCKED(q40_irq_controller.lock),
- .startup = q40_irq_startup,
- .shutdown = q40_irq_shutdown,
- .enable = q40_enable_irq,
- .disable = q40_disable_irq,
+ .irq_startup = q40_irq_startup,
+ .irq_shutdown = q40_irq_shutdown,
+ .irq_enable = q40_irq_enable,
+ .irq_disable = q40_irq_disable,
};
/*
void __init q40_init_IRQ(void)
{
- m68k_setup_irq_controller(&q40_irq_controller, 1, Q40_IRQ_MAX);
+ m68k_setup_irq_controller(&q40_irq_chip, handle_simple_irq, 1,
+ Q40_IRQ_MAX);
/* setup handler for ISA ints */
m68k_setup_auto_interrupt(q40_irq_handler);
- m68k_irq_startup(IRQ_AUTO_2);
- m68k_irq_startup(IRQ_AUTO_4);
+ m68k_irq_startup_irq(IRQ_AUTO_2);
+ m68k_irq_startup_irq(IRQ_AUTO_4);
/* now enable some ints.. */
master_outb(1, EXT_ENABLE_REG); /* ISA IRQ 5-15 */
switch (irq) {
case 4:
case 6:
- __m68k_handle_int(Q40_IRQ_SAMPLE, fp);
+ do_IRQ(Q40_IRQ_SAMPLE, fp);
return;
}
if (mir & Q40_IRQ_FRAME_MASK) {
- __m68k_handle_int(Q40_IRQ_FRAME, fp);
+ do_IRQ(Q40_IRQ_FRAME, fp);
master_outb(-1, FRAME_CLEAR_REG);
}
if ((mir & Q40_IRQ_SER_MASK) || (mir & Q40_IRQ_EXT_MASK)) {
goto iirq;
}
q40_state[irq] |= IRQ_INPROGRESS;
- __m68k_handle_int(irq, fp);
+ do_IRQ(irq, fp);
q40_state[irq] &= ~IRQ_INPROGRESS;
/* naively enable everything, if that fails than */
mir = master_inb(IIRQ_REG);
/* should test whether keyboard irq is really enabled, doing it in defhand */
if (mir & Q40_IRQ_KEYB_MASK)
- __m68k_handle_int(Q40_IRQ_KEYBOARD, fp);
+ do_IRQ(Q40_IRQ_KEYBOARD, fp);
return;
}
-void q40_enable_irq(unsigned int irq)
+void q40_irq_enable(struct irq_data *data)
{
+ unsigned int irq = data->irq;
+
if (irq >= 5 && irq <= 15) {
mext_disabled--;
if (mext_disabled > 0)
- printk("q40_enable_irq : nested disable/enable\n");
+ printk("q40_irq_enable : nested disable/enable\n");
if (mext_disabled == 0)
master_outb(1, EXT_ENABLE_REG);
}
}
-void q40_disable_irq(unsigned int irq)
+void q40_irq_disable(struct irq_data *data)
{
+ unsigned int irq = data->irq;
+
/* disable ISA iqs : only do something if the driver has been
* verified to be Q40 "compatible" - right now IDE, NE2K
* Any driver should not attempt to sleep across disable_irq !!
printk("disable_irq nesting count %d\n",mext_disabled);
}
}
-
-unsigned long q40_probe_irq_on(void)
-{
- printk("irq probing not working - reconfigure the driver to avoid this\n");
- return -1;
-}
-int q40_probe_irq_off(unsigned long irqs)
-{
- return -1;
-}
static irqreturn_t sun3_int7(int irq, void *dev_id)
{
- *sun3_intreg |= (1 << irq);
- if (!(kstat_cpu(0).irqs[irq] % 2000))
- sun3_leds(led_pattern[(kstat_cpu(0).irqs[irq] % 16000) / 2000]);
+ unsigned int cnt;
+
+ cnt = kstat_irqs_cpu(irq, 0);
+ if (!(cnt % 2000))
+ sun3_leds(led_pattern[cnt % 16000 / 2000]);
return IRQ_HANDLED;
}
static irqreturn_t sun3_int5(int irq, void *dev_id)
{
+ unsigned int cnt;
+
#ifdef CONFIG_SUN3
intersil_clear();
#endif
- *sun3_intreg |= (1 << irq);
#ifdef CONFIG_SUN3
intersil_clear();
#endif
xtime_update(1);
update_process_times(user_mode(get_irq_regs()));
- if (!(kstat_cpu(0).irqs[irq] % 20))
- sun3_leds(led_pattern[(kstat_cpu(0).irqs[irq] % 160) / 20]);
+ cnt = kstat_irqs_cpu(irq, 0);
+ if (!(cnt % 20))
+ sun3_leds(led_pattern[cnt % 160 / 20]);
return IRQ_HANDLED;
}
return IRQ_HANDLED;
}
-static void sun3_inthandle(unsigned int irq, struct pt_regs *fp)
+static void sun3_irq_enable(struct irq_data *data)
{
- *sun3_intreg &= ~(1 << irq);
+ sun3_enable_irq(data->irq);
+};
- __m68k_handle_int(irq, fp);
-}
+static void sun3_irq_disable(struct irq_data *data)
+{
+ sun3_disable_irq(data->irq);
+};
-static struct irq_controller sun3_irq_controller = {
+static struct irq_chip sun3_irq_chip = {
.name = "sun3",
- .lock = __SPIN_LOCK_UNLOCKED(sun3_irq_controller.lock),
- .startup = m68k_irq_startup,
- .shutdown = m68k_irq_shutdown,
- .enable = sun3_enable_irq,
- .disable = sun3_disable_irq,
+ .irq_startup = m68k_irq_startup,
+ .irq_shutdown = m68k_irq_shutdown,
+ .irq_enable = sun3_irq_enable,
+ .irq_disable = sun3_irq_disable,
+ .irq_mask = sun3_irq_disable,
+ .irq_unmask = sun3_irq_enable,
};
void __init sun3_init_IRQ(void)
{
*sun3_intreg = 1;
- m68k_setup_auto_interrupt(sun3_inthandle);
- m68k_setup_irq_controller(&sun3_irq_controller, IRQ_AUTO_1, 7);
- m68k_setup_user_interrupt(VEC_USER, 128, NULL);
+ m68k_setup_irq_controller(&sun3_irq_chip, handle_level_irq, IRQ_AUTO_1,
+ 7);
+ m68k_setup_user_interrupt(VEC_USER, 128);
if (request_irq(IRQ_AUTO_5, sun3_int5, 0, "int5", NULL))
pr_err("Couldn't register %s interrupt\n", "int5");
#include <linux/dma-mapping.h>
#include <linux/gfp.h>
#include <linux/dma-debug.h>
+#include <linux/export.h>
#include <asm/bug.h>
/*
#include <linux/kernel_stat.h>
#include <linux/irq.h>
#include <linux/of_irq.h>
+#include <linux/export.h>
#include <asm/prom.h>
#include <linux/pfn.h>
#include <linux/slab.h>
#include <linux/swap.h>
+#include <linux/export.h>
#include <asm/page.h>
#include <asm/mmu_context.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/mm.h>
+#include <linux/export.h>
#include <asm/io.h>
#include <asm/pci-bridge.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_pci.h>
+#include <linux/export.h>
#include <asm/processor.h>
#include <asm/io.h>
bool
default n
-config ARCH_SUPPORTS_OPROFILE
- bool
- default y if !MIPS_MT_SMTC
-
config GENERIC_HWEIGHT
bool
default y
source "kernel/Kconfig.preempt"
-config MIPS_INSANE_LARGE
- bool "Support for large 64-bit configurations"
- depends on CPU_R10000 && 64BIT
- help
- MIPS R10000 does support a 44 bit / 16TB address space as opposed to
- previous 64-bit processors which only supported 40 bit / 1TB. If you
- need processes of more than 1TB virtual address space, say Y here.
- This will result in additional memory usage, so it is not
- recommended for normal users.
-
config KEXEC
bool "Kexec system call (EXPERIMENTAL)"
depends on EXPERIMENTAL
archprepare:
ifdef CONFIG_MIPS32_N32
@echo ' Checking missing-syscalls for N32'
- $(Q)$(MAKE) $(build)=. missing-syscalls ccflags-y="-mabi=n32"
+ $(Q)$(MAKE) $(build)=. missing-syscalls missing_syscalls_flags="-mabi=n32"
endif
ifdef CONFIG_MIPS32_O32
@echo ' Checking missing-syscalls for O32'
- $(Q)$(MAKE) $(build)=. missing-syscalls ccflags-y="-mabi=32"
+ $(Q)$(MAKE) $(build)=. missing-syscalls missing_syscalls_flags="-mabi=32"
endif
install:
* Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
*/
+#include <linux/export.h>
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_driver_chipcommon.h>
#include <linux/ssb/ssb_driver_extif.h>
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/export.h>
#include <linux/types.h>
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_embedded.h>
* Copyright (C) 2009, 2010 Cavium Networks, Inc.
*/
#include <linux/clocksource.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/dma-mapping.h>
#include <linux/scatterlist.h>
#include <linux/bootmem.h>
+#include <linux/export.h>
#include <linux/swiotlb.h>
#include <linux/types.h>
#include <linux/init.h>
* Copyright (C) 2007, 2008 Cavium Networks
*/
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
static struct map_info flash_map;
static struct mtd_info *mymtd;
-static int nr_parts;
-static struct mtd_partition *parts;
static const char *part_probe_types[] = {
"cmdlinepart",
#ifdef CONFIG_MTD_REDBOOT_PARTS
mymtd = do_map_probe("cfi_probe", &flash_map);
if (mymtd) {
mymtd->owner = THIS_MODULE;
-
- nr_parts = parse_mtd_partitions(mymtd,
- part_probe_types,
- &parts, 0);
- mtd_device_register(mymtd, parts, nr_parts);
+ mtd_device_parse_register(mymtd, part_probe_types,
+ 0, NULL, 0);
} else {
pr_err("Failed to register MTD device for flash\n");
}
* the other bits alone.
*/
cvmx_write_csr(CVMX_CIU_MBOX_CLRX(cvmx_get_core_num()), 0xffff);
- if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, IRQF_DISABLED,
- "SMP-IPI", mailbox_interrupt)) {
+ if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt,
+ IRQF_PERCPU | IRQF_NO_THREAD, "SMP-IPI",
+ mailbox_interrupt)) {
panic("Cannot request_irq(OCTEON_IRQ_MBOX0)\n");
}
}
/* arg[0] is "g", the rest is boot parameters */
for (i = 1; i < argc; i++) {
- if (strlen(arcs_cmdline) + strlen(arg[i] + 1)
+ if (strlen(arcs_cmdline) + strlen(arg[i]) + 1
>= sizeof(arcs_cmdline))
break;
strcat(arcs_cmdline, arg[i]);
return -EINVAL;
}
+#define gpio_get_value_cansleep gpio_get_value
+
static inline void gpio_set_value(unsigned gpio, int value)
{
switch (bcm47xx_bus_type) {
}
}
+#define gpio_set_value_cansleep gpio_set_value
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+ return 0;
+}
+
+static inline int gpio_is_valid(unsigned gpio)
+{
+ return gpio < (BCM47XX_EXTIF_GPIO_LINES + BCM47XX_CHIPCO_GPIO_LINES);
+}
+
+
static inline int gpio_direction_input(unsigned gpio)
{
switch (bcm47xx_bus_type) {
}
-/* cansleep wrappers */
-#include <asm-generic/gpio.h>
-
#endif /* __BCM47XX_GPIO_H */
#define __NR_syncfs (__NR_Linux + 342)
#define __NR_sendmmsg (__NR_Linux + 343)
#define __NR_setns (__NR_Linux + 344)
+#define __NR_process_vm_readv (__NR_Linux + 345)
+#define __NR_process_vm_writev (__NR_Linux + 346)
/*
* Offset of the last Linux o32 flavoured syscall
*/
-#define __NR_Linux_syscalls 344
+#define __NR_Linux_syscalls 346
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
#define __NR_O32_Linux 4000
-#define __NR_O32_Linux_syscalls 344
+#define __NR_O32_Linux_syscalls 346
#if _MIPS_SIM == _MIPS_SIM_ABI64
#define __NR_syncfs (__NR_Linux + 301)
#define __NR_sendmmsg (__NR_Linux + 302)
#define __NR_setns (__NR_Linux + 303)
+#define __NR_process_vm_readv (__NR_Linux + 304)
+#define __NR_process_vm_writev (__NR_Linux + 305)
/*
* Offset of the last Linux 64-bit flavoured syscall
*/
-#define __NR_Linux_syscalls 303
+#define __NR_Linux_syscalls 305
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
#define __NR_64_Linux 5000
-#define __NR_64_Linux_syscalls 303
+#define __NR_64_Linux_syscalls 305
#if _MIPS_SIM == _MIPS_SIM_NABI32
#define __NR_syncfs (__NR_Linux + 306)
#define __NR_sendmmsg (__NR_Linux + 307)
#define __NR_setns (__NR_Linux + 308)
+#define __NR_process_vm_readv (__NR_Linux + 309)
+#define __NR_process_vm_writev (__NR_Linux + 310)
/*
* Offset of the last N32 flavoured syscall
*/
-#define __NR_Linux_syscalls 308
+#define __NR_Linux_syscalls 310
#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
#define __NR_N32_Linux 6000
-#define __NR_N32_Linux_syscalls 308
+#define __NR_N32_Linux_syscalls 310
#ifdef __KERNEL__
*
* Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
*/
-#include <linux/module.h>
#include <linux/init.h>
#include <linux/serial_8250.h>
/*
* Compare interrupt can be routed and latched outside the core,
- * so a single execution hazard barrier may not be enough to give
- * it time to clear as seen in the Cause register. 4 time the
- * pipeline depth seems reasonably conservative, and empirically
- * works better in configurations with high CPU/bus clock ratios.
+ * so wait up to worst case number of cycle counter ticks for timer interrupt
+ * changes to propagate to the cause register.
*/
-
-#define compare_change_hazard() \
- do { \
- irq_disable_hazard(); \
- irq_disable_hazard(); \
- irq_disable_hazard(); \
- irq_disable_hazard(); \
- } while (0)
+#define COMPARE_INT_SEEN_TICKS 50
int c0_compare_int_usable(void)
{
* IP7 already pending? Try to clear it by acking the timer.
*/
if (c0_compare_int_pending()) {
- write_c0_compare(read_c0_count());
- compare_change_hazard();
+ cnt = read_c0_count();
+ write_c0_compare(cnt);
+ back_to_back_c0_hazard();
+ while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
+ if (!c0_compare_int_pending())
+ break;
if (c0_compare_int_pending())
return 0;
}
cnt = read_c0_count();
cnt += delta;
write_c0_compare(cnt);
- compare_change_hazard();
+ back_to_back_c0_hazard();
if ((int)(read_c0_count() - cnt) < 0)
break;
/* increase delta if the timer was already expired */
while ((int)(read_c0_count() - cnt) <= 0)
; /* Wait for expiry */
- compare_change_hazard();
+ while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
+ if (c0_compare_int_pending())
+ break;
if (!c0_compare_int_pending())
return 0;
-
- write_c0_compare(read_c0_count());
- compare_change_hazard();
+ cnt = read_c0_count();
+ write_c0_compare(cnt);
+ back_to_back_c0_hazard();
+ while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
+ if (!c0_compare_int_pending())
+ break;
if (c0_compare_int_pending())
return 0;
#include <linux/ptrace.h>
#include <linux/smp.h>
#include <linux/stddef.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <asm/bugs.h>
#include <asm/cpu.h>
#include <asm/mipsregs.h>
#include <asm/system.h>
#include <asm/watch.h>
+#include <asm/elf.h>
#include <asm/spram.h>
#include <asm/uaccess.h>
* for more details.
*/
+#include <linux/module.h>
#include <linux/cpufreq.h>
#include <linux/platform_device.h>
*/
#include <linux/clockchips.h>
#include <linux/i8253.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/smp.h>
#include <linux/irq.h>
#include <linux/mm.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/sched.h>
#include <linux/init_task.h>
#include <linux/fs.h>
*
* Copyright (C) 2004, 06 Ralf Baechle <ralf@linux-mips.org>
*/
-#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
-#include <linux/module.h>
#include <linux/proc_fs.h>
#include <linux/mm.h>
#include <linux/random.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/sched.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/interrupt.h>
#include <linux/security.h>
* Copyright (C) 1999, 2000, 01 Silicon Graphics, Inc.
*/
#include <linux/interrupt.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <asm/checksum.h>
#include <asm/pgtable.h>
#include <asm/uaccess.h>
#include <linux/fs.h>
#include <linux/string.h>
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/jump_label.h>
* Copyright (C) 2004 Thiemo Seufer
*/
#include <linux/errno.h>
-#include <linux/module.h>
#include <linux/sched.h>
#include <linux/tick.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
+#include <linux/export.h>
#include <linux/ptrace.h>
#include <linux/mman.h>
#include <linux/personality.h>
*/
#include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/bootmem.h>
* Copyright (C) 2001 MIPS Technologies, Inc.
*/
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/pm.h>
#include <linux/types.h>
#include <linux/reboot.h>
#include <linux/device.h>
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/fs.h>
#include <linux/init.h>
#include <asm/uaccess.h>
sys sys_syncfs 1
sys sys_sendmmsg 4
sys sys_setns 2
+ sys sys_process_vm_readv 6 /* 4345 */
+ sys sys_process_vm_writev 6
.endm
/* We pre-compute the number of _instruction_ bytes needed to
PTR sys_syncfs
PTR sys_sendmmsg
PTR sys_setns
+ PTR sys_process_vm_readv
+ PTR sys_process_vm_writev /* 5305 */
.size sys_call_table,.-sys_call_table
PTR sys_syncfs
PTR compat_sys_sendmmsg
PTR sys_setns
+ PTR compat_sys_process_vm_readv
+ PTR compat_sys_process_vm_writev /* 6310 */
.size sysn32_call_table,.-sysn32_call_table
PTR sys_syncfs
PTR compat_sys_sendmmsg
PTR sys_setns
+ PTR compat_sys_process_vm_readv /* 4345 */
+ PTR compat_sys_process_vm_writev
.size sys_call_table,.-sys_call_table
*/
#include <linux/init.h>
#include <linux/ioport.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/screen_info.h>
#include <linux/bootmem.h>
#include <linux/initrd.h>
#include <linux/hrtimer.h>
#include <linux/fs.h>
#include <linux/debugfs.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/spinlock.h>
*/
#include <linux/sched.h>
#include <linux/stacktrace.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <asm/stacktrace.h>
/*
#include <linux/timex.h>
#include <linux/smp.h>
#include <linux/spinlock.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <asm/cpu-features.h>
#include <asm/div64.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/mm.h>
-#include <linux/module.h>
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/spinlock.h>
}
#endif /* CONFIG_MIPS_MT_SMTC */
- cpu_data[cpu].asid_cache = ASID_FIRST_VERSION;
+ if (!cpu_data[cpu].asid_cache)
+ cpu_data[cpu].asid_cache = ASID_FIRST_VERSION;
atomic_inc(&init_mm.mm_count);
current->active_mm = &init_mm;
* Undo the partial store in this case.
*/
#include <linux/mm.h>
-#include <linux/module.h>
#include <linux/signal.h>
#include <linux/smp.h>
#include <linux/sched.h>
*/
#include <linux/kernel.h>
#include <linux/device.h>
-#include <linux/module.h>
#include <linux/fs.h>
#include <linux/init.h>
#include <asm/uaccess.h>
* Copyright (C) 2010 John Crispin <blogic@openwrt.org>
*/
#include <linux/io.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/types.h>
*/
#include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/kernel.h>
* Copyright (C) 2010 John Crispin <blogic@openwrt.org>
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/clk.h>
#include <asm/bootinfo.h>
#include <asm/time.h>
*/
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <asm/bootinfo.h>
*/
#include <linux/io.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/clk.h>
*/
#include <linux/io.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/clk.h>
*/
#include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/dma-mapping.h>
+#include <linux/export.h>
#include <lantiq_soc.h>
#include <xway_dma.h>
*/
#include <linux/slab.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/ioport.h>
*/
#include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/types.h>
#include <linux/platform_device.h>
#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/types.h>
#include <linux/platform_device.h>
#include <linux/mutex.h>
* Copyright (C) 2010 John Crispin <blogic@openwrt.org>
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/clk.h>
#include <asm/bootinfo.h>
#include <asm/time.h>
* Copyright (C) 2010 John Crispin <blogic@openwrt.org>
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/clk.h>
#include <asm/bootinfo.h>
#include <asm/time.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/pm.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <asm/reboot.h>
#include <lantiq_soc.h>
*/
#include <linux/err.h>
+#include <linux/smp.h>
#include <linux/platform_device.h>
static struct platform_device loongson2_cpufreq_device = {
+++ /dev/null
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *
- * Author: source@mvista.com
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <pci.h>
-#include <glb.h>
-#include <nand.h>
-
-static struct resource pci_io_resource = {
- .start = PNX8550_PCIIO + 0x1000, /* reserve regacy I/O space */
- .end = PNX8550_PCIIO + PNX8550_PCIIO_SIZE,
- .name = "pci IO space",
- .flags = IORESOURCE_IO
-};
-
-static struct resource pci_mem_resource = {
- .start = PNX8550_PCIMEM,
- .end = PNX8550_PCIMEM + PNX8550_PCIMEM_SIZE - 1,
- .name = "pci memory space",
- .flags = IORESOURCE_MEM
-};
-
-extern struct pci_ops pnx8550_pci_ops;
-
-static struct pci_controller pnx8550_controller = {
- .pci_ops = &pnx8550_pci_ops,
- .io_map_base = PNX8550_PORT_BASE,
- .io_resource = &pci_io_resource,
- .mem_resource = &pci_mem_resource,
-};
-
-/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
-static inline unsigned long get_system_mem_size(void)
-{
- /* Read IP2031_RANK0_ADDR_LO */
- unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
- /* Read IP2031_RANK1_ADDR_HI */
- unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
-
- return dram_r1_hi - dram_r0_lo + 1;
-}
-
-static int __init pnx8550_pci_setup(void)
-{
- int pci_mem_code;
- int mem_size = get_system_mem_size() >> 20;
-
- /* Clear the Global 2 Register, PCI Inta Output Enable Registers
- Bit 1:Enable DAC Powerdown
- -> 0:DACs are enabled and are working normally
- 1:DACs are powerdown
- Bit 0:Enable of PCI inta output
- -> 0 = Disable PCI inta output
- 1 = Enable PCI inta output
- */
- PNX8550_GLB2_ENAB_INTA_O = 0;
-
- /* Calc the PCI mem size code */
- if (mem_size >= 128)
- pci_mem_code = SIZE_128M;
- else if (mem_size >= 64)
- pci_mem_code = SIZE_64M;
- else if (mem_size >= 32)
- pci_mem_code = SIZE_32M;
- else
- pci_mem_code = SIZE_16M;
-
- /* Set PCI_XIO registers */
- outl(pci_mem_resource.start, PCI_BASE | PCI_BASE1_LO);
- outl(pci_mem_resource.end + 1, PCI_BASE | PCI_BASE1_HI);
- outl(pci_io_resource.start, PCI_BASE | PCI_BASE2_LO);
- outl(pci_io_resource.end, PCI_BASE | PCI_BASE2_HI);
-
- /* Send memory transaction via PCI_BASE2 */
- outl(0x00000001, PCI_BASE | PCI_IO);
-
- /* Unlock the setup register */
- outl(0xca, PCI_BASE | PCI_UNLOCKREG);
-
- /*
- * BAR0 of PNX8550 (pci base 10) must be zero in order for ide
- * to work, and in order for bus_to_baddr to work without any
- * hacks.
- */
- outl(0x00000000, PCI_BASE | PCI_BASE10);
-
- /*
- *These two bars are set by default or the boot code.
- * However, it's safer to set them here so we're not boot
- * code dependent.
- */
- outl(0x1be00000, PCI_BASE | PCI_BASE14); /* PNX MMIO */
- outl(PNX8550_NAND_BASE_ADDR, PCI_BASE | PCI_BASE18); /* XIO */
-
- outl(PCI_EN_TA |
- PCI_EN_PCI2MMI |
- PCI_EN_XIO |
- PCI_SETUP_BASE18_SIZE(SIZE_32M) |
- PCI_SETUP_BASE18_EN |
- PCI_SETUP_BASE14_EN |
- PCI_SETUP_BASE10_PREF |
- PCI_SETUP_BASE10_SIZE(pci_mem_code) |
- PCI_SETUP_CFGMANAGE_EN |
- PCI_SETUP_PCIARB_EN,
- PCI_BASE |
- PCI_SETUP); /* PCI_SETUP */
- outl(0x00000000, PCI_BASE | PCI_CTRL); /* PCI_CONTROL */
-
- register_pci_controller(&pnx8550_controller);
-
- return 0;
-}
-
-arch_initcall(pnx8550_pci_setup);
+++ /dev/null
-/*
- *
- * 2.6 port, Embedded Alley Solutions, Inc
- *
- * Based on Per Hallsmark, per.hallsmark@mvista.com
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/irq.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/serial_pnx8xxx.h>
-#include <linux/pm.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/reboot.h>
-#include <asm/pgtable.h>
-#include <asm/time.h>
-
-#include <glb.h>
-#include <int.h>
-#include <pci.h>
-#include <uart.h>
-#include <nand.h>
-
-extern void __init board_setup(void);
-extern void pnx8550_machine_restart(char *);
-extern void pnx8550_machine_halt(void);
-extern void pnx8550_machine_power_off(void);
-extern struct resource ioport_resource;
-extern struct resource iomem_resource;
-extern char *prom_getcmdline(void);
-
-struct resource standard_io_resources[] = {
- {
- .start = 0x00,
- .end = 0x1f,
- .name = "dma1",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x40,
- .end = 0x5f,
- .name = "timer",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x80,
- .end = 0x8f,
- .name = "dma page reg",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0xc0,
- .end = 0xdf,
- .name = "dma2",
- .flags = IORESOURCE_BUSY
- },
-};
-
-#define STANDARD_IO_RESOURCES ARRAY_SIZE(standard_io_resources)
-
-extern struct resource pci_io_resource;
-extern struct resource pci_mem_resource;
-
-/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
-unsigned long get_system_mem_size(void)
-{
- /* Read IP2031_RANK0_ADDR_LO */
- unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
- /* Read IP2031_RANK1_ADDR_HI */
- unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
-
- return dram_r1_hi - dram_r0_lo + 1;
-}
-
-int pnx8550_console_port = -1;
-
-void __init plat_mem_setup(void)
-{
- int i;
- char* argptr;
-
- board_setup(); /* board specific setup */
-
- _machine_restart = pnx8550_machine_restart;
- _machine_halt = pnx8550_machine_halt;
- pm_power_off = pnx8550_machine_power_off;
-
- /* Clear the Global 2 Register, PCI Inta Output Enable Registers
- Bit 1:Enable DAC Powerdown
- -> 0:DACs are enabled and are working normally
- 1:DACs are powerdown
- Bit 0:Enable of PCI inta output
- -> 0 = Disable PCI inta output
- 1 = Enable PCI inta output
- */
- PNX8550_GLB2_ENAB_INTA_O = 0;
-
- /* IO/MEM resources. */
- set_io_port_base(PNX8550_PORT_BASE);
- ioport_resource.start = 0;
- ioport_resource.end = ~0;
- iomem_resource.start = 0;
- iomem_resource.end = ~0;
-
- /* Request I/O space for devices on this board */
- for (i = 0; i < STANDARD_IO_RESOURCES; i++)
- request_resource(&ioport_resource, standard_io_resources + i);
-
- /* Place the Mode Control bit for GPIO pin 16 in primary function */
- /* Pin 16 is used by UART1, UA1_TX */
- outl((PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_16_BIT) |
- (PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_17_BIT),
- PNX8550_GPIO_MC1);
-
- argptr = prom_getcmdline();
- if ((argptr = strstr(argptr, "console=ttyS")) != NULL) {
- argptr += strlen("console=ttyS");
- pnx8550_console_port = *argptr == '0' ? 0 : 1;
-
- /* We must initialize the UART (console) before early printk */
- /* Set LCR to 8-bit and BAUD to 38400 (no 5) */
- ip3106_lcr(UART_BASE, pnx8550_console_port) =
- PNX8XXX_UART_LCR_8BIT;
- ip3106_baud(UART_BASE, pnx8550_console_port) = 5;
- }
-}
* Support for all devices (greater than 16) added by David Gathright.
*/
+#include <linux/export.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
*/
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/pci.h>
#include <linux/smp.h>
#include <asm/sn/arch.h>
#include <linux/delay.h>
#include <linux/mm.h>
#include <linux/vmalloc.h>
+#include <linux/export.h>
#include <linux/platform_device.h>
#include <asm/pci.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/bootmem.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/pci.h>
/* Get the boot parameters */
for (i = 1; i < argc; i++) {
- if (strlen(arcs_cmdline) + strlen(arg[i] + 1) >=
+ if (strlen(arcs_cmdline) + strlen(arg[i]) + 1 >=
sizeof(arcs_cmdline))
break;
-source "arch/mips/powertv/asic/Kconfig"
-
config BOOTLOADER_DRIVER
bool "PowerTV Bootloader Driver Support"
default n
+++ /dev/null
-config MIN_RUNTIME_RESOURCES
- bool "Support for minimum runtime resources"
- default n
- depends on POWERTV
- help
- Enables support for minimizing the number of (SA asic) runtime
- resources that are preallocated by the kernel.
-
-config MIN_RUNTIME_DOCSIS
- bool "Support for minimum DOCSIS resource"
- default y
- depends on MIN_RUNTIME_RESOURCES
- help
- Enables support for the preallocated DOCSIS resource.
-
-config MIN_RUNTIME_PMEM
- bool "Support for minimum PMEM resource"
- default y
- depends on MIN_RUNTIME_RESOURCES
- help
- Enables support for the preallocated Memory resource.
-
-config MIN_RUNTIME_TFTP
- bool "Support for minimum TFTP resource"
- default y
- depends on MIN_RUNTIME_RESOURCES
- help
- Enables support for the preallocated TFTP resource.
#include <linux/init.h>
+#include <linux/export.h>
#include <linux/pci.h>
#include <asm/mach-powertv/interrupts.h>
#include "powertv-pci.h"
*/
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <asm/mach-powertv/asic.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/types.h>
+#include <linux/export.h>
#include <linux/spinlock.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
*/
#include <linux/init.h>
+#include <linux/export.h>
#include <asm/bootinfo.h>
#include <asm/reboot.h>
*/
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <linux/device.h>
#include <linux/spi/spi.h>
#include <linux/spi/eeprom.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/interrupt.h>
*/
#include <linux/errno.h>
#include <linux/init.h>
+#include <linux/smp.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
*/
#include <linux/errno.h>
#include <linux/init.h>
+#include <linux/smp.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
config MMU
def_bool y
-config WISHBONE_BUS_BIG_ENDIAN
- def_bool y
-
config SYMBOL_PREFIX
string
default ""
Say Y if you are unsure.
-config OPENRISC_EXCEPTION_DEBUG
- bool "Print processor state at each exception"
- default n
- help
- This option will make your kernel unusable for all but kernel
- debugging.
-
- Say N if you are unsure.
-
config OPENRISC_ESR_EXCEPTION_BUG_CHECK
bool "Check for possible ESR exception bug"
default n
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/string.h>
+#include <linux/export.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/pdc.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/scatterlist.h>
+#include <linux/export.h>
#include <asm/cacheflush.h>
#include <asm/dma.h> /* for DMA_CHUNK_SIZE */
#include <linux/pci.h>
#undef PCI_DEBUG
#include <linux/proc_fs.h>
+#include <linux/export.h>
#include <asm/processor.h>
#include <asm/pdc.h>
#include <linux/ioport.h>
#include <linux/pci.h>
+#include <linux/export.h>
#include <asm/io.h>
/*
config HOTPLUG_CPU
bool "Support for enabling/disabling CPUs"
- depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC)
+ depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC || PPC_POWERNV)
---help---
Say Y here to be able to disable and re-enable individual
CPUs at runtime on SMP machines.
config KEXEC
bool "kexec system call (EXPERIMENTAL)"
- depends on (PPC_BOOK3S || FSL_BOOKE) && EXPERIMENTAL
+ depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP && !PPC_47x)) && EXPERIMENTAL
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
If unsure, say "N"
-config PPCBUG_NVRAM
- bool "Enable reading PPCBUG NVRAM during boot" if PPLUS || LOPEC
- default y if PPC_PREP
-
config IRQ_ALL_CPUS
bool "Distribute interrupts on all CPUs by default"
depends on SMP && !MV64360
def_bool y
config SYS_SUPPORTS_HUGETLBFS
- def_bool y
- depends on PPC_BOOK3S_64
+ bool
source "mm/Kconfig"
depends on PCI_8260 && !8272
default y
-choice
- prompt "IDMA channel for PCI 9 workaround"
- depends on 8260_PCI9
-
-config 8260_PCI9_IDMA1
- bool "IDMA1"
-
-config 8260_PCI9_IDMA2
- bool "IDMA2"
-
-config 8260_PCI9_IDMA3
- bool "IDMA3"
-
-config 8260_PCI9_IDMA4
- bool "IDMA4"
-
-endchoice
-
source "drivers/pci/pcie/Kconfig"
source "drivers/pci/Kconfig"
config PPC_EARLY_DEBUG
bool "Early debugging (dangerous)"
- # PPC_EARLY_DEBUG on 440 leaves AS=1 mappings above the TLB high water
- # mark, which doesn't work with current 440 KVM.
- depends on !KVM
help
Say Y to enable some early debugging facilities that may be available
for your processor/board combination. Those facilities are hacks
config PPC_EARLY_DEBUG_44x
bool "Early serial debugging for IBM/AMCC 44x CPUs"
- depends on 44x
+ # PPC_EARLY_DEBUG on 440 leaves AS=1 mappings above the TLB high water
+ # mark, which doesn't work with current 440 KVM.
+ depends on 44x && !KVM
help
Select this to enable early debugging for IBM 44x chips via the
inbuilt serial port. If you enable this, ensure you set
depends on PPC_WSP
select PPC_UDBG_16550
+config PPC_EARLY_DEBUG_PS3GELIC
+ bool "Early debugging through the PS3 Ethernet port"
+ depends on PPC_PS3
+ select PS3GELIC_UDBG
+ help
+ Select this to enable early debugging for the PlayStation3 via
+ UDP broadcasts sent out through the Ethernet port.
+
+config PPC_EARLY_DEBUG_OPAL_RAW
+ bool "OPAL raw console"
+ depends on HVC_OPAL
+ help
+ Select this to enable early debugging for the PowerNV platform
+ using a "raw" console
+
+config PPC_EARLY_DEBUG_OPAL_HVSI
+ bool "OPAL hvsi console"
+ depends on HVC_OPAL
+ help
+ Select this to enable early debugging for the PowerNV platform
+ using an "hvsi" console
+
endchoice
+config PPC_EARLY_DEBUG_OPAL
+ def_bool y
+ depends on PPC_EARLY_DEBUG_OPAL_RAW || PPC_EARLY_DEBUG_OPAL_HVSI
+
+
config PPC_EARLY_DEBUG_HVSI_VTERMNO
hex "vterm number to use with early debug HVSI"
depends on PPC_EARLY_DEBUG_LPAR_HVSI
You probably want 0x30000000 for your first serial port and
0x30000001 for your second one
+config PPC_EARLY_DEBUG_OPAL_VTERMNO
+ hex "vterm number to use with OPAL early debug"
+ depends on PPC_EARLY_DEBUG_OPAL
+ default "0"
+ help
+ This correspond to which /dev/hvcN you want to use for early
+ debug.
+
+ On OPAL v1 (takeover) this should always be 0
+ On OPAL v2, this will be 0 for network console and 1 or 2 for
+ the machine built-in serial ports.
+
config PPC_EARLY_DEBUG_44x_PHYSLOW
hex "Low 32 bits of early debug UART physical address"
depends on PPC_EARLY_DEBUG_44x
echo 'disable kernel modules' ; \
false ; \
fi
- @if ! /bin/echo dssall | $(AS) -many -o $(TOUT) >/dev/null 2>&1 ; then \
- echo -n '*** ${VERSION}.${PATCHLEVEL} kernels no longer build ' ; \
- echo 'correctly with old versions of binutils.' ; \
- echo '*** Please upgrade your binutils to 2.12.1 or newer' ; \
- false ; \
- fi
CLEAN_FILES += $(TOUT)
libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
libfdtheader := fdt.h libfdt.h libfdt_internal.h
-$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o): \
+$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o epapr.o): \
$(addprefix $(obj)/,$(libfdtheader))
src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
$(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) vmlinux
image-$(CONFIG_PPC_PSERIES) += zImage.pseries
+image-$(CONFIG_PPC_POWERNV) += zImage.pseries
image-$(CONFIG_PPC_MAPLE) += zImage.maple
image-$(CONFIG_PPC_IBM_CELL_BLADE) += zImage.pseries
image-$(CONFIG_PPC_PS3) += dtbImage.ps3
--- /dev/null
+/*
+ * charon board Device Tree Source
+ *
+ * Copyright (C) 2007 Semihalf
+ * Marian Balakowicz <m8@semihalf.com>
+ *
+ * Copyright (C) 2010 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "anon,charon";
+ compatible = "anon,charon";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&mpc5200_pic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,5200@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <0x4000>; // L1, 16K
+ i-cache-size = <0x4000>; // L1, 16K
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x08000000>; // 128MB
+ };
+
+ soc5200@f0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc5200-immr";
+ ranges = <0 0xf0000000 0x0000c000>;
+ reg = <0xf0000000 0x00000100>;
+ bus-frequency = <0>; // from bootloader
+ system-frequency = <0>; // from bootloader
+
+ cdm@200 {
+ compatible = "fsl,mpc5200-cdm";
+ reg = <0x200 0x38>;
+ };
+
+ mpc5200_pic: interrupt-controller@500 {
+ // 5200 interrupts are encoded into two levels;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ compatible = "fsl,mpc5200-pic";
+ reg = <0x500 0x80>;
+ };
+
+ timer@600 { // General Purpose Timer
+ compatible = "fsl,mpc5200-gpt";
+ reg = <0x600 0x10>;
+ interrupts = <1 9 0>;
+ fsl,has-wdt;
+ };
+
+ can@900 {
+ compatible = "fsl,mpc5200-mscan";
+ interrupts = <2 17 0>;
+ reg = <0x900 0x80>;
+ };
+
+ can@980 {
+ compatible = "fsl,mpc5200-mscan";
+ interrupts = <2 18 0>;
+ reg = <0x980 0x80>;
+ };
+
+ gpio_simple: gpio@b00 {
+ compatible = "fsl,mpc5200-gpio";
+ reg = <0xb00 0x40>;
+ interrupts = <1 7 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ usb@1000 {
+ compatible = "fsl,mpc5200-ohci","ohci-be";
+ reg = <0x1000 0xff>;
+ interrupts = <2 6 0>;
+ };
+
+ dma-controller@1200 {
+ device_type = "dma-controller";
+ compatible = "fsl,mpc5200-bestcomm";
+ reg = <0x1200 0x80>;
+ interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
+ 3 4 0 3 5 0 3 6 0 3 7 0
+ 3 8 0 3 9 0 3 10 0 3 11 0
+ 3 12 0 3 13 0 3 14 0 3 15 0>;
+ };
+
+ xlb@1f00 {
+ compatible = "fsl,mpc5200-xlb";
+ reg = <0x1f00 0x100>;
+ };
+
+ serial@2000 { // PSC1
+ compatible = "fsl,mpc5200-psc-uart";
+ reg = <0x2000 0x100>;
+ interrupts = <2 1 0>;
+ };
+
+ serial@2400 { // PSC3
+ compatible = "fsl,mpc5200-psc-uart";
+ reg = <0x2400 0x100>;
+ interrupts = <2 3 0>;
+ };
+
+ ethernet@3000 {
+ compatible = "fsl,mpc5200-fec";
+ reg = <0x3000 0x400>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <2 5 0>;
+ fixed-link = <1 1 100 0 0>;
+ };
+
+ mdio@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200-mdio";
+ reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
+ interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
+ };
+
+ ata@3a00 {
+ compatible = "fsl,mpc5200-ata";
+ reg = <0x3a00 0x100>;
+ interrupts = <2 7 0>;
+ };
+
+ i2c@3d00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200-i2c","fsl-i2c";
+ reg = <0x3d00 0x40>;
+ interrupts = <2 15 0>;
+ };
+
+
+ i2c@3d40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200-i2c","fsl-i2c";
+ reg = <0x3d40 0x40>;
+ interrupts = <2 16 0>;
+
+ dtt@28 {
+ compatible = "national,lm80";
+ reg = <0x28>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ };
+ };
+
+ sram@8000 {
+ compatible = "fsl,mpc5200-sram";
+ reg = <0x8000 0x4000>;
+ };
+ };
+
+ localbus {
+ compatible = "fsl,mpc5200-lpb","simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = < 0 0 0xfc000000 0x02000000
+ 1 0 0xe0000000 0x04000000 // CS1 range, SM501
+ 3 0 0xe8000000 0x00080000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x02000000>;
+ bank-width = <4>;
+ device-width = <2>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+ };
+
+ display@1,0 {
+ compatible = "smi,sm501";
+ reg = <1 0x00000000 0x00800000
+ 1 0x03e00000 0x00200000>;
+ mode = "640x480-32@60";
+ interrupts = <1 1 3>;
+ little-endian;
+ };
+
+ mram0@3,0 {
+ compatible = "mtd-ram";
+ reg = <3 0x00000 0x80000>;
+ bank-width = <1>;
+ };
+ };
+
+ pci@f0000d00 {
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ compatible = "fsl,mpc5200-pci";
+ reg = <0xf0000d00 0x100>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
+ 0xc000 0 0 2 &mpc5200_pic 0 0 3
+ 0xc000 0 0 3 &mpc5200_pic 0 0 3
+ 0xc000 0 0 4 &mpc5200_pic 0 0 3>;
+ clock-frequency = <0>; // From boot loader
+ interrupts = <2 8 0 2 9 0 2 10 0>;
+ bus-range = <0 0>;
+ ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
+ 0x02000000 0 0x90000000 0x90000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+ };
+};
soc5200@f0000000 {
timer@600 { // General Purpose Timer
+ #gpio-cells = <2>;
fsl,has-wdt;
+ gpio-controller;
};
- rtc@800 {
- status = "disabled";
+ timer@610 {
+ #gpio-cells = <2>;
+ gpio-controller;
};
- can@900 {
+ rtc@800 {
status = "disabled";
};
- can@980 {
- status = "disabled";
+ spi@f00 {
+ msp430@0 {
+ compatible = "spidev";
+ spi-max-frequency = <32000>;
+ reg = <0>;
+ };
};
psc@2000 { // PSC1
};
i2c@3d00 {
- rtc@50 {
+ eeprom@50 {
compatible = "at,24c08";
reg = <0x50>;
};
+ rtc@56 {
+ compatible = "mc,rv3029c2";
+ reg = <0x56>;
+ };
+
rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
};
pci@f0000d00 {
- status = "disabled";
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
+ 0xc000 0 0 2 &mpc5200_pic 0 0 3
+ 0xc000 0 0 3 &mpc5200_pic 0 0 3
+ 0xc000 0 0 4 &mpc5200_pic 0 0 3>;
+ clock-frequency = <0>; // From boot loader
+ interrupts = <2 8 0 2 9 0 2 10 0>;
+ bus-range = <0 0>;
+ ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
+ 0x02000000 0 0x90000000 0x90000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
};
localbus {
- ranges = <0 0 0xff000000 0x1000000>;
+ ranges = <0 0 0xff000000 0x1000000
+ 4 0 0x60000000 0x0001000>;
// 16-bit flash device at LocalPlus Bus CS0
flash@0,0 {
reg = <0x00f00000 0x100000>;
};
};
+
+ can@4,0 {
+ compatible = "nxp,sja1000";
+ reg = <4 0x000 0x80>;
+ nxp,external-clock-frequency = <24000000>;
+ interrupts = <1 2 3>; // Level-low
+ };
+
+ can@4,100 {
+ compatible = "nxp,sja1000";
+ reg = <4 0x100 0x80>;
+ nxp,external-clock-frequency = <24000000>;
+ interrupts = <1 2 3>; // Level-low
+ };
+
+ serial@4,200 {
+ compatible = "nxp,sc28l92";
+ reg = <4 0x200 0x10>;
+ interrupts = <1 3 3>;
+ };
};
};
enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
+ cell-index = <0>;
device_type = "network";
- model = "eTSEC";
+ model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
+ interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "gmii";
interrupt-parent = <&gef_pic>;
interrupts = <0x9 0x4>;
reg = <1>;
+ device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&gef_pic>;
interrupts = <0x8 0x4>;
reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
};
enet1: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <2>;
device_type = "network";
- model = "eTSEC";
+ model = "TSEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>;
+ interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "gmii";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
+ cell-index = <0>;
device_type = "network";
- model = "eTSEC";
+ model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
+ interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "gmii";
interrupt-parent = <&gef_pic>;
interrupts = <0x9 0x4>;
reg = <1>;
+ device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&gef_pic>;
interrupts = <0x8 0x4>;
reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
};
enet1: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <2>;
device_type = "network";
- model = "eTSEC";
+ model = "TSEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>;
+ interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "gmii";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
+ cell-index = <0>;
device_type = "network";
- model = "eTSEC";
+ model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
+ interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "gmii";
interrupt-parent = <&gef_pic>;
interrupts = <0x9 0x4>;
reg = <1>;
+ device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&gef_pic>;
interrupts = <0x8 0x4>;
reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
};
enet1: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <2>;
device_type = "network";
- model = "eTSEC";
+ model = "TSEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>;
+ interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "gmii";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
+++ /dev/null
-/*
-* Device Tree Source for Netstal Maschinen HCU4
-* based on the IBM Walnut
-*
-* Copyright 2008
-* Niklaus Giger <niklaus.giger@member.fsf.org>
-*
-* Copyright 2007 IBM Corp.
-* Josh Boyer <jwboyer@linux.vnet.ibm.com>
-*
-* This file is licensed under the terms of the GNU General Public
-* License version 2. This program is licensed "as is" without
-* any warranty of any kind, whether express or implied.
-*/
-
-/dts-v1/;
-
-/ {
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- model = "netstal,hcu4";
- compatible = "netstal,hcu4";
- dcr-parent = <0x1>;
-
- aliases {
- ethernet0 = "/plb/opb/ethernet@ef600800";
- serial0 = "/plb/opb/serial@ef600300";
- };
-
- cpus {
- #address-cells = <0x1>;
- #size-cells = <0x0>;
-
- cpu@0 {
- device_type = "cpu";
- model = "PowerPC,405GPr";
- reg = <0x0>;
- clock-frequency = <0>; /* Filled in by U-Boot */
- timebase-frequency = <0x0>; /* Filled in by U-Boot */
- i-cache-line-size = <0x20>;
- d-cache-line-size = <0x20>;
- i-cache-size = <0x4000>;
- d-cache-size = <0x4000>;
- dcr-controller;
- dcr-access-method = "native";
- linux,phandle = <0x1>;
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x0 0x0>; /* Filled in by U-Boot */
- };
-
- UIC0: interrupt-controller {
- compatible = "ibm,uic";
- interrupt-controller;
- cell-index = <0x0>;
- dcr-reg = <0xc0 0x9>;
- #address-cells = <0x0>;
- #size-cells = <0x0>;
- #interrupt-cells = <0x2>;
- linux,phandle = <0x2>;
- };
-
- plb {
- compatible = "ibm,plb3";
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- ranges;
- clock-frequency = <0x0>; /* Filled in by U-Boot */
-
- SDRAM0: memory-controller {
- compatible = "ibm,sdram-405gp";
- dcr-reg = <0x10 0x2>;
- };
-
- MAL: mcmal {
- compatible = "ibm,mcmal-405gp", "ibm,mcmal";
- dcr-reg = <0x180 0x62>;
- num-tx-chans = <0x1>;
- num-rx-chans = <0x1>;
- interrupt-parent = <0x2>;
- interrupts = <0xb 0x4 0xc 0x4 0xa 0x4 0xd 0x4 0xe 0x4>;
- linux,phandle = <0x3>;
- };
-
- POB0: opb {
- compatible = "ibm,opb-405gp", "ibm,opb";
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- ranges = <0xef600000 0xef600000 0xa00000>;
- dcr-reg = <0xa0 0x5>;
- clock-frequency = <0x0>; /* Filled in by U-Boot */
-
- UART0: serial@ef600300 {
- device_type = "serial";
- compatible = "ns16550";
- reg = <0xef600300 0x8>;
- virtual-reg = <0xef600300>;
- clock-frequency = <0x0>;/* Filled in by U-Boot */
- current-speed = <0>; /* Filled in by U-Boot */
- interrupt-parent = <0x2>;
- interrupts = <0x0 0x4>;
- };
-
- IIC: i2c@ef600500 {
- compatible = "ibm,iic-405gp", "ibm,iic";
- reg = <0xef600500 0x11>;
- interrupt-parent = <0x2>;
- interrupts = <0x2 0x4>;
- };
-
- GPIO: gpio@ef600700 {
- compatible = "ibm,gpio-405gp";
- reg = <0xef600700 0x20>;
- };
-
- EMAC: ethernet@ef600800 {
- device_type = "network";
- compatible = "ibm,emac-405gp", "ibm,emac";
- interrupt-parent = <0x2>;
- interrupts = <0xf 0x4 0x9 0x4>;
- local-mac-address = [00 00 00 00 00 00];
- reg = <0xef600800 0x70>;
- mal-device = <0x3>;
- mal-tx-channel = <0x0>;
- mal-rx-channel = <0x0>;
- cell-index = <0x0>;
- max-frame-size = <0x5dc>;
- rx-fifo-size = <0x1000>;
- tx-fifo-size = <0x800>;
- phy-mode = "rmii";
- phy-map = <0x1>;
- };
- };
-
- EBC0: ebc {
- compatible = "ibm,ebc-405gp", "ibm,ebc";
- dcr-reg = <0x12 0x2>;
- #address-cells = <0x2>;
- #size-cells = <0x1>;
- clock-frequency = <0x0>; /* Filled in by U-Boot */
-
- sram@0,0 {
- reg = <0x0 0x0 0x80000>;
- };
-
- flash@0,80000 {
- compatible = "jedec-flash";
- bank-width = <0x1>;
- reg = <0x0 0x80000 0x80000>;
- #address-cells = <0x1>;
- #size-cells = <0x1>;
-
- partition@0 {
- label = "OpenBIOS";
- reg = <0x0 0x80000>;
- read-only;
- };
- };
- };
- };
-
- chosen {
- linux,stdout-path = "/plb/opb/serial@ef600300";
- };
-};
localbus@fdf05000 {
#address-cells = <2>;
#size-cells = <1>;
- compatible = "fsl,mpc8560-localbus";
+ compatible = "fsl,mpc8560-localbus", "simple-bus";
reg = <0xfdf05000 0x68>;
ranges = <0x0 0x0 0xe0000000 0x00800000
linux,network-index = <2>;
fsl,cpm-command = <0x16200300>;
};
+
+ usb@11b60 {
+ compatible = "fsl,mpc8272-cpm-usb";
+ mode = "peripheral";
+ reg = <0x11b60 0x40 0x8b00 0x100>;
+ interrupts = <11 8>;
+ interrupt-parent = <&PIC>;
+ usb-clock = <5>;
+ };
};
cpm2_pio_c: gpio-controller@10d40 {
};
spi@f00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
reg = <0xf00 0x20>;
interrupts = <2 13 0 2 14 0>;
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8349e-localbus",
- "fsl,pq2pro-localbus";
+ "fsl,pq2pro-localbus",
+ "simple-bus";
reg = <0xe0005000 0xd8>;
ranges = <0x0 0x0 0xfe000000 0x1000000 /* flash */
0x1 0x0 0xf8000000 0x20000 /* VSC 7385 */
};
board-control@3,0 {
- compatible = "fsl,p1022ds-pixis";
+ compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
reg = <3 0 0x30>;
interrupt-parent = <&mpic>;
/*
};
};
+ board-control@3,0 {
+ compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis";
+ reg = <0x3 0x0 0x30>;
+ };
+
nand@4,0 {
compatible = "fsl,elbc-fcm-nand";
reg = <0x4 0x0 0x40000>;
+++ /dev/null
-/*
- * P2040RDB Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "p2040si.dtsi"
-
-/ {
- model = "fsl,P2040RDB";
- compatible = "fsl,P2040RDB";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- memory {
- device_type = "memory";
- };
-
- soc: soc@ffe000000 {
- spi@110000 {
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,s25sl12801";
- reg = <0>;
- spi-max-frequency = <40000000>; /* input clock */
- partition@u-boot {
- label = "u-boot";
- reg = <0x00000000 0x00100000>;
- read-only;
- };
- partition@kernel {
- label = "kernel";
- reg = <0x00100000 0x00500000>;
- read-only;
- };
- partition@dtb {
- label = "dtb";
- reg = <0x00600000 0x00100000>;
- read-only;
- };
- partition@fs {
- label = "file system";
- reg = <0x00700000 0x00900000>;
- };
- };
- };
-
- i2c@118000 {
- lm75b@48 {
- compatible = "nxp,lm75a";
- reg = <0x48>;
- };
- eeprom@50 {
- compatible = "at24,24c256";
- reg = <0x50>;
- };
- rtc@68 {
- compatible = "pericom,pt7c4338";
- reg = <0x68>;
- };
- };
-
- i2c@118100 {
- eeprom@50 {
- compatible = "at24,24c256";
- reg = <0x50>;
- };
- };
-
- usb0: usb@210000 {
- phy_type = "utmi";
- };
-
- usb1: usb@211000 {
- dr_mode = "host";
- phy_type = "utmi";
- };
- };
-
- localbus@ffe124000 {
- reg = <0xf 0xfe124000 0 0x1000>;
- ranges = <0 0 0xf 0xe8000000 0x08000000>;
-
- flash@0,0 {
- compatible = "cfi-flash";
- reg = <0 0 0x08000000>;
- bank-width = <2>;
- device-width = <2>;
- };
- };
-
- pci0: pcie@ffe200000 {
- reg = <0xf 0xfe200000 0 0x1000>;
- ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
- 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
- pcie@0 {
- ranges = <0x02000000 0 0xe0000000
- 0x02000000 0 0xe0000000
- 0 0x20000000
-
- 0x01000000 0 0x00000000
- 0x01000000 0 0x00000000
- 0 0x00010000>;
- };
- };
-
- pci1: pcie@ffe201000 {
- reg = <0xf 0xfe201000 0 0x1000>;
- ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
- 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
- pcie@0 {
- ranges = <0x02000000 0 0xe0000000
- 0x02000000 0 0xe0000000
- 0 0x20000000
-
- 0x01000000 0 0x00000000
- 0x01000000 0 0x00000000
- 0 0x00010000>;
- };
- };
-
- pci2: pcie@ffe202000 {
- reg = <0xf 0xfe202000 0 0x1000>;
- ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
- 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
- pcie@0 {
- ranges = <0x02000000 0 0xe0000000
- 0x02000000 0 0xe0000000
- 0 0x20000000
-
- 0x01000000 0 0x00000000
- 0x01000000 0 0x00000000
- 0 0x00010000>;
- };
- };
-};
+++ /dev/null
-/*
- * P2040 Silicon Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/ {
- compatible = "fsl,P2040";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ccsr = &soc;
-
- serial0 = &serial0;
- serial1 = &serial1;
- serial2 = &serial2;
- serial3 = &serial3;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- usb0 = &usb0;
- usb1 = &usb1;
- dma0 = &dma0;
- dma1 = &dma1;
- sdhc = &sdhc;
- msi0 = &msi0;
- msi1 = &msi1;
- msi2 = &msi2;
-
- crypto = &crypto;
- sec_jr0 = &sec_jr0;
- sec_jr1 = &sec_jr1;
- sec_jr2 = &sec_jr2;
- sec_jr3 = &sec_jr3;
- rtic_a = &rtic_a;
- rtic_b = &rtic_b;
- rtic_c = &rtic_c;
- rtic_d = &rtic_d;
- sec_mon = &sec_mon;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: PowerPC,e500mc@0 {
- device_type = "cpu";
- reg = <0>;
- next-level-cache = <&L2_0>;
- L2_0: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu1: PowerPC,e500mc@1 {
- device_type = "cpu";
- reg = <1>;
- next-level-cache = <&L2_1>;
- L2_1: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu2: PowerPC,e500mc@2 {
- device_type = "cpu";
- reg = <2>;
- next-level-cache = <&L2_2>;
- L2_2: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu3: PowerPC,e500mc@3 {
- device_type = "cpu";
- reg = <3>;
- next-level-cache = <&L2_3>;
- L2_3: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- };
-
- soc: soc@ffe000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
- reg = <0xf 0xfe000000 0 0x00001000>;
-
- soc-sram-error {
- compatible = "fsl,soc-sram-error";
- interrupts = <16 2 1 29>;
- };
-
- corenet-law@0 {
- compatible = "fsl,corenet-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <32>;
- };
-
- memory-controller@8000 {
- compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
- reg = <0x8000 0x1000>;
- interrupts = <16 2 1 23>;
- };
-
- cpc: l3-cache-controller@10000 {
- compatible = "fsl,p2040-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
- reg = <0x10000 0x1000>;
- interrupts = <16 2 1 27>;
- };
-
- corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
- reg = <0x18000 0x1000>;
- interrupts = <16 2 1 31>;
- fsl,ccf-num-csdids = <32>;
- fsl,ccf-num-snoopids = <32>;
- };
-
- iommu@20000 {
- compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x4000>;
- interrupts = <
- 24 2 0 0
- 16 2 1 30>;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic", "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi0: msi@41600 {
- compatible = "fsl,mpic-msi";
- reg = <0x41600 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- msi1: msi@41800 {
- compatible = "fsl,mpic-msi";
- reg = <0x41800 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe8 0 0 0
- 0xe9 0 0 0
- 0xea 0 0 0
- 0xeb 0 0 0
- 0xec 0 0 0
- 0xed 0 0 0
- 0xee 0 0 0
- 0xef 0 0 0>;
- };
-
- msi2: msi@41a00 {
- compatible = "fsl,mpic-msi";
- reg = <0x41a00 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xf0 0 0 0
- 0xf1 0 0 0
- 0xf2 0 0 0
- 0xf3 0 0 0
- 0xf4 0 0 0
- 0xf5 0 0 0
- 0xf6 0 0 0
- 0xf7 0 0 0>;
- };
-
- guts: global-utilities@e0000 {
- compatible = "fsl,qoriq-device-config-1.0";
- reg = <0xe0000 0xe00>;
- fsl,has-rstcr;
- #sleep-cells = <1>;
- fsl,liodn-bits = <12>;
- };
-
- pins: global-utilities@e0e00 {
- compatible = "fsl,qoriq-pin-control-1.0";
- reg = <0xe0e00 0x200>;
- #sleep-cells = <2>;
- };
-
- clockgen: global-utilities@e1000 {
- compatible = "fsl,p2040-clockgen", "fsl,qoriq-clockgen-1.0";
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- };
-
- rcpm: global-utilities@e2000 {
- compatible = "fsl,qoriq-rcpm-1.0";
- reg = <0xe2000 0x1000>;
- #sleep-cells = <1>;
- };
-
- sfp: sfp@e8000 {
- compatible = "fsl,p2040-sfp", "fsl,qoriq-sfp-1.0";
- reg = <0xe8000 0x1000>;
- };
-
- serdes: serdes@ea000 {
- compatible = "fsl,p2040-serdes";
- reg = <0xea000 0x1000>;
- };
-
- dma0: dma@100300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p2040-dma", "fsl,eloplus-dma";
- reg = <0x100300 0x4>;
- ranges = <0x0 0x100100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,p2040-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <28 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p2040-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <29 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p2040-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <30 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p2040-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <31 2 0 0>;
- };
- };
-
- dma1: dma@101300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p2040-dma", "fsl,eloplus-dma";
- reg = <0x101300 0x4>;
- ranges = <0x0 0x101100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,p2040-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <32 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p2040-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <33 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p2040-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <34 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p2040-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <35 2 0 0>;
- };
- };
-
- spi@110000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,p2040-espi", "fsl,mpc8536-espi";
- reg = <0x110000 0x1000>;
- interrupts = <53 0x2 0 0>;
- fsl,espi-num-chipselects = <4>;
-
- };
-
- sdhc: sdhc@114000 {
- compatible = "fsl,p2040-esdhc", "fsl,esdhc";
- reg = <0x114000 0x1000>;
- interrupts = <48 2 0 0>;
- sdhci,auto-cmd12;
- clock-frequency = <0>;
- };
-
-
- i2c@118000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x118000 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@118100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x118100 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@119000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <2>;
- compatible = "fsl-i2c";
- reg = <0x119000 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- i2c@119100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <3>;
- compatible = "fsl-i2c";
- reg = <0x119100 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- serial0: serial@11c500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c500 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial1: serial@11c600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c600 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial2: serial@11d500 {
- cell-index = <2>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d500 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- serial3: serial@11d600 {
- cell-index = <3>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d600 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- gpio0: gpio@130000 {
- compatible = "fsl,p2040-gpio", "fsl,qoriq-gpio";
- reg = <0x130000 0x1000>;
- interrupts = <55 2 0 0>;
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- usb0: usb@210000 {
- compatible = "fsl,p2040-usb2-mph",
- "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
- reg = <0x210000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <44 0x2 0 0>;
- port0;
- };
-
- usb1: usb@211000 {
- compatible = "fsl,p2040-usb2-dr",
- "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- reg = <0x211000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <45 0x2 0 0>;
- };
-
- sata@220000 {
- compatible = "fsl,p2040-sata", "fsl,pq-sata-v2";
- reg = <0x220000 0x1000>;
- interrupts = <68 0x2 0 0>;
- };
-
- sata@221000 {
- compatible = "fsl,p2040-sata", "fsl,pq-sata-v2";
- reg = <0x221000 0x1000>;
- interrupts = <69 0x2 0 0>;
- };
-
- crypto: crypto@300000 {
- compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x300000 0x10000>;
- ranges = <0 0x300000 0x10000>;
- interrupts = <92 2 0 0>;
-
- sec_jr0: jr@1000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x1000 0x1000>;
- interrupts = <88 2 0 0>;
- };
-
- sec_jr1: jr@2000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x2000 0x1000>;
- interrupts = <89 2 0 0>;
- };
-
- sec_jr2: jr@3000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x3000 0x1000>;
- interrupts = <90 2 0 0>;
- };
-
- sec_jr3: jr@4000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x4000 0x1000>;
- interrupts = <91 2 0 0>;
- };
-
- rtic@6000 {
- compatible = "fsl,sec-v4.2-rtic",
- "fsl,sec-v4.0-rtic";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x6000 0x100>;
- ranges = <0x0 0x6100 0xe00>;
-
- rtic_a: rtic-a@0 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x00 0x20 0x100 0x80>;
- };
-
- rtic_b: rtic-b@20 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x20 0x20 0x200 0x80>;
- };
-
- rtic_c: rtic-c@40 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x40 0x20 0x300 0x80>;
- };
-
- rtic_d: rtic-d@60 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x60 0x20 0x500 0x80>;
- };
- };
- };
-
- sec_mon: sec_mon@314000 {
- compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
- reg = <0x314000 0x1000>;
- interrupts = <93 2 0 0>;
- };
-
- };
-
- localbus@ffe124000 {
- compatible = "fsl,p2040-elbc", "fsl,elbc", "simple-bus";
- interrupts = <25 2 0 0>;
- #address-cells = <2>;
- #size-cells = <1>;
- };
-
- pci0: pcie@ffe200000 {
- compatible = "fsl,p2040-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi0>;
- interrupts = <16 2 1 15>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 15>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 40 1 0 0
- 0000 0 0 2 &mpic 1 1 0 0
- 0000 0 0 3 &mpic 2 1 0 0
- 0000 0 0 4 &mpic 3 1 0 0
- >;
- };
- };
-
- pci1: pcie@ffe201000 {
- compatible = "fsl,p2040-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi1>;
- interrupts = <16 2 1 14>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 14>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 41 1 0 0
- 0000 0 0 2 &mpic 5 1 0 0
- 0000 0 0 3 &mpic 6 1 0 0
- 0000 0 0 4 &mpic 7 1 0 0
- >;
- };
- };
-
- pci2: pcie@ffe202000 {
- compatible = "fsl,p2040-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi2>;
- interrupts = <16 2 1 13>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 13>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 42 1 0 0
- 0000 0 0 2 &mpic 9 1 0 0
- 0000 0 0 3 &mpic 10 1 0 0
- 0000 0 0 4 &mpic 11 1 0 0
- >;
- };
- };
-};
--- /dev/null
+/*
+ * P2041RDB Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p2041si.dtsi"
+
+/ {
+ model = "fsl,P2041RDB";
+ compatible = "fsl,P2041RDB";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ memory {
+ device_type = "memory";
+ };
+
+ dcsr: dcsr@f00000000 {
+ ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+ };
+
+ soc: soc@ffe000000 {
+ spi@110000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25sl12801";
+ reg = <0>;
+ spi-max-frequency = <40000000>; /* input clock */
+ partition@u-boot {
+ label = "u-boot";
+ reg = <0x00000000 0x00100000>;
+ read-only;
+ };
+ partition@kernel {
+ label = "kernel";
+ reg = <0x00100000 0x00500000>;
+ read-only;
+ };
+ partition@dtb {
+ label = "dtb";
+ reg = <0x00600000 0x00100000>;
+ read-only;
+ };
+ partition@fs {
+ label = "file system";
+ reg = <0x00700000 0x00900000>;
+ };
+ };
+ };
+
+ i2c@118000 {
+ lm75b@48 {
+ compatible = "nxp,lm75a";
+ reg = <0x48>;
+ };
+ eeprom@50 {
+ compatible = "at24,24c256";
+ reg = <0x50>;
+ };
+ rtc@68 {
+ compatible = "pericom,pt7c4338";
+ reg = <0x68>;
+ };
+ };
+
+ i2c@118100 {
+ eeprom@50 {
+ compatible = "at24,24c256";
+ reg = <0x50>;
+ };
+ };
+
+ usb1: usb@211000 {
+ dr_mode = "host";
+ };
+ };
+
+ localbus@ffe124000 {
+ reg = <0xf 0xfe124000 0 0x1000>;
+ ranges = <0 0 0xf 0xe8000000 0x08000000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x08000000>;
+ bank-width = <2>;
+ device-width = <2>;
+ };
+ };
+
+ pci0: pcie@ffe200000 {
+ reg = <0xf 0xfe200000 0 0x1000>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+ 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x20000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+
+ pci1: pcie@ffe201000 {
+ reg = <0xf 0xfe201000 0 0x1000>;
+ ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+ 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x20000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+
+ pci2: pcie@ffe202000 {
+ reg = <0xf 0xfe202000 0 0x1000>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
+ 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x20000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+};
--- /dev/null
+/*
+ * P2041 Silicon Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/ {
+ compatible = "fsl,P2041";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ccsr = &soc;
+ dcsr = &dcsr;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ dma0 = &dma0;
+ dma1 = &dma1;
+ sdhc = &sdhc;
+ msi0 = &msi0;
+ msi1 = &msi1;
+ msi2 = &msi2;
+
+ crypto = &crypto;
+ sec_jr0 = &sec_jr0;
+ sec_jr1 = &sec_jr1;
+ sec_jr2 = &sec_jr2;
+ sec_jr3 = &sec_jr3;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ sec_mon = &sec_mon;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e500mc@0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu1: PowerPC,e500mc@1 {
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu2: PowerPC,e500mc@2 {
+ device_type = "cpu";
+ reg = <2>;
+ next-level-cache = <&L2_2>;
+ L2_2: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu3: PowerPC,e500mc@3 {
+ device_type = "cpu";
+ reg = <3>;
+ next-level-cache = <&L2_3>;
+ L2_3: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ };
+
+ dcsr: dcsr@f00000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+
+ dcsr-epu@0 {
+ compatible = "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ interrupt-parent = <&mpic>;
+ reg = <0x0 0x1000>;
+ };
+ dcsr-npc {
+ compatible = "fsl,dcsr-npc";
+ reg = <0x1000 0x1000 0x1000000 0x8000>;
+ };
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0xB0000 0x1000>;
+ };
+ dcsr-dpaa@9000 {
+ compatible = "fsl,p2041-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+ dcsr-ocn@11000 {
+ compatible = "fsl,p2041-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr>;
+ reg = <0x12000 0x1000>;
+ };
+ dcsr-nal@18000 {
+ compatible = "fsl,p2041-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+ dcsr-rcpm@22000 {
+ compatible = "fsl,p2041-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@40000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x40000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@41000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x41000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@42000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu2>;
+ reg = <0x42000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@43000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu3>;
+ reg = <0x43000 0x1000>;
+ };
+ };
+
+ soc: soc@ffe000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
+
+ soc-sram-error {
+ compatible = "fsl,soc-sram-error";
+ interrupts = <16 2 1 29>;
+ };
+
+ corenet-law@0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <32>;
+ };
+
+ ddr: memory-controller@8000 {
+ compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 23>;
+ };
+
+ cpc: l3-cache-controller@10000 {
+ compatible = "fsl,p2041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+ reg = <0x10000 0x1000>;
+ interrupts = <16 2 1 27>;
+ };
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 31>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
+
+ iommu@20000 {
+ compatible = "fsl,pamu-v1.0", "fsl,pamu";
+ reg = <0x20000 0x4000>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 30>;
+ };
+
+ mpic: pic@40000 {
+ clock-frequency = <0>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <4>;
+ reg = <0x40000 0x40000>;
+ compatible = "fsl,mpic", "chrp,open-pic";
+ device_type = "open-pic";
+ };
+
+ msi0: msi@41600 {
+ compatible = "fsl,mpic-msi";
+ reg = <0x41600 0x200>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe0 0 0 0
+ 0xe1 0 0 0
+ 0xe2 0 0 0
+ 0xe3 0 0 0
+ 0xe4 0 0 0
+ 0xe5 0 0 0
+ 0xe6 0 0 0
+ 0xe7 0 0 0>;
+ };
+
+ msi1: msi@41800 {
+ compatible = "fsl,mpic-msi";
+ reg = <0x41800 0x200>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe8 0 0 0
+ 0xe9 0 0 0
+ 0xea 0 0 0
+ 0xeb 0 0 0
+ 0xec 0 0 0
+ 0xed 0 0 0
+ 0xee 0 0 0
+ 0xef 0 0 0>;
+ };
+
+ msi2: msi@41a00 {
+ compatible = "fsl,mpic-msi";
+ reg = <0x41a00 0x200>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xf0 0 0 0
+ 0xf1 0 0 0
+ 0xf2 0 0 0
+ 0xf3 0 0 0
+ 0xf4 0 0 0
+ 0xf5 0 0 0
+ 0xf6 0 0 0
+ 0xf7 0 0 0>;
+ };
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,qoriq-device-config-1.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ #sleep-cells = <1>;
+ fsl,liodn-bits = <12>;
+ };
+
+ pins: global-utilities@e0e00 {
+ compatible = "fsl,qoriq-pin-control-1.0";
+ reg = <0xe0e00 0x200>;
+ #sleep-cells = <2>;
+ };
+
+ clockgen: global-utilities@e1000 {
+ compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0";
+ reg = <0xe1000 0x1000>;
+ clock-frequency = <0>;
+ };
+
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,qoriq-rcpm-1.0";
+ reg = <0xe2000 0x1000>;
+ #sleep-cells = <1>;
+ };
+
+ sfp: sfp@e8000 {
+ compatible = "fsl,p2041-sfp", "fsl,qoriq-sfp-1.0";
+ reg = <0xe8000 0x1000>;
+ };
+
+ serdes: serdes@ea000 {
+ compatible = "fsl,p2041-serdes";
+ reg = <0xea000 0x1000>;
+ };
+
+ dma0: dma@100300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p2041-dma", "fsl,eloplus-dma";
+ reg = <0x100300 0x4>;
+ ranges = <0x0 0x100100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,p2041-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupts = <28 2 0 0>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,p2041-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupts = <29 2 0 0>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,p2041-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupts = <30 2 0 0>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,p2041-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupts = <31 2 0 0>;
+ };
+ };
+
+ dma1: dma@101300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p2041-dma", "fsl,eloplus-dma";
+ reg = <0x101300 0x4>;
+ ranges = <0x0 0x101100 0x200>;
+ cell-index = <1>;
+ dma-channel@0 {
+ compatible = "fsl,p2041-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupts = <32 2 0 0>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,p2041-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupts = <33 2 0 0>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,p2041-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupts = <34 2 0 0>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,p2041-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupts = <35 2 0 0>;
+ };
+ };
+
+ spi@110000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,p2041-espi", "fsl,mpc8536-espi";
+ reg = <0x110000 0x1000>;
+ interrupts = <53 0x2 0 0>;
+ fsl,espi-num-chipselects = <4>;
+ };
+
+ sdhc: sdhc@114000 {
+ compatible = "fsl,p2041-esdhc", "fsl,esdhc";
+ reg = <0x114000 0x1000>;
+ interrupts = <48 2 0 0>;
+ sdhci,auto-cmd12;
+ clock-frequency = <0>;
+ };
+
+ i2c@118000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x118000 0x100>;
+ interrupts = <38 2 0 0>;
+ dfsrr;
+ };
+
+ i2c@118100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x118100 0x100>;
+ interrupts = <38 2 0 0>;
+ dfsrr;
+ };
+
+ i2c@119000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <2>;
+ compatible = "fsl-i2c";
+ reg = <0x119000 0x100>;
+ interrupts = <39 2 0 0>;
+ dfsrr;
+ };
+
+ i2c@119100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <3>;
+ compatible = "fsl-i2c";
+ reg = <0x119100 0x100>;
+ interrupts = <39 2 0 0>;
+ dfsrr;
+ };
+
+ serial0: serial@11c500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x11c500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <36 2 0 0>;
+ };
+
+ serial1: serial@11c600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x11c600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <36 2 0 0>;
+ };
+
+ serial2: serial@11d500 {
+ cell-index = <2>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x11d500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <37 2 0 0>;
+ };
+
+ serial3: serial@11d600 {
+ cell-index = <3>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x11d600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <37 2 0 0>;
+ };
+
+ gpio0: gpio@130000 {
+ compatible = "fsl,p2041-gpio", "fsl,qoriq-gpio";
+ reg = <0x130000 0x1000>;
+ interrupts = <55 2 0 0>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ usb0: usb@210000 {
+ compatible = "fsl,p2041-usb2-mph",
+ "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+ reg = <0x210000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <44 0x2 0 0>;
+ phy_type = "utmi";
+ port0;
+ };
+
+ usb1: usb@211000 {
+ compatible = "fsl,p2041-usb2-dr",
+ "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+ reg = <0x211000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <45 0x2 0 0>;
+ phy_type = "utmi";
+ };
+
+ sata@220000 {
+ compatible = "fsl,p2041-sata", "fsl,pq-sata-v2";
+ reg = <0x220000 0x1000>;
+ interrupts = <68 0x2 0 0>;
+ };
+
+ sata@221000 {
+ compatible = "fsl,p2041-sata", "fsl,pq-sata-v2";
+ reg = <0x221000 0x1000>;
+ interrupts = <69 0x2 0 0>;
+ };
+
+ crypto: crypto@300000 {
+ compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x300000 0x10000>;
+ ranges = <0 0x300000 0x10000>;
+ interrupts = <92 2 0 0>;
+
+ sec_jr0: jr@1000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <88 2 0 0>;
+ };
+
+ sec_jr1: jr@2000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <89 2 0 0>;
+ };
+
+ sec_jr2: jr@3000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupts = <90 2 0 0>;
+ };
+
+ sec_jr3: jr@4000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x4000 0x1000>;
+ interrupts = <91 2 0 0>;
+ };
+
+ rtic@6000 {
+ compatible = "fsl,sec-v4.2-rtic",
+ "fsl,sec-v4.0-rtic";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x6000 0x100>;
+ ranges = <0x0 0x6100 0xe00>;
+
+ rtic_a: rtic-a@0 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x00 0x20 0x100 0x80>;
+ };
+
+ rtic_b: rtic-b@20 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x20 0x20 0x200 0x80>;
+ };
+
+ rtic_c: rtic-c@40 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x40 0x20 0x300 0x80>;
+ };
+
+ rtic_d: rtic-d@60 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x60 0x20 0x500 0x80>;
+ };
+ };
+ };
+
+ sec_mon: sec_mon@314000 {
+ compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
+ reg = <0x314000 0x1000>;
+ interrupts = <93 2 0 0>;
+ };
+
+ };
+
+ localbus@ffe124000 {
+ compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <25 2 0 0>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ };
+
+ pci0: pcie@ffe200000 {
+ compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ fsl,msi = <&msi0>;
+ interrupts = <16 2 1 15>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 15>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ };
+ };
+
+ pci1: pcie@ffe201000 {
+ compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ clock-frequency = <33333333>;
+ fsl,msi = <&msi1>;
+ interrupts = <16 2 1 14>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 14>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 41 1 0 0
+ 0000 0 0 2 &mpic 5 1 0 0
+ 0000 0 0 3 &mpic 6 1 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
+ >;
+ };
+ };
+
+ pci2: pcie@ffe202000 {
+ compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ fsl,msi = <&msi2>;
+ interrupts = <16 2 1 13>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 13>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 42 1 0 0
+ 0000 0 0 2 &mpic 9 1 0 0
+ 0000 0 0 3 &mpic 10 1 0 0
+ 0000 0 0 4 &mpic 11 1 0 0
+ >;
+ };
+ };
+};
device_type = "memory";
};
+ dcsr: dcsr@f00000000 {
+ ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+ };
+
soc: soc@ffe000000 {
spi@110000 {
flash@0 {
};
board-control@3,0 {
- compatible = "fsl,p3041ds-pixis";
- reg = <3 0 0x20>;
+ compatible = "fsl,p3041ds-fpga", "fsl,fpga-ngpixis";
+ reg = <3 0 0x30>;
};
};
aliases {
ccsr = &soc;
+ dcsr = &dcsr;
serial0 = &serial0;
serial1 = &serial1;
};
};
+ dcsr: dcsr@f00000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+
+ dcsr-epu@0 {
+ compatible = "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ interrupt-parent = <&mpic>;
+ reg = <0x0 0x1000>;
+ };
+ dcsr-npc {
+ compatible = "fsl,dcsr-npc";
+ reg = <0x1000 0x1000 0x1000000 0x8000>;
+ };
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0xB0000 0x1000>;
+ };
+ dcsr-dpaa@9000 {
+ compatible = "fsl,p43041-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+ dcsr-ocn@11000 {
+ compatible = "fsl,p43041-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr>;
+ reg = <0x12000 0x1000>;
+ };
+ dcsr-nal@18000 {
+ compatible = "fsl,p43041-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+ dcsr-rcpm@22000 {
+ compatible = "fsl,p43041-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@40000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x40000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@41000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x41000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@42000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu2>;
+ reg = <0x42000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@43000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu3>;
+ reg = <0x43000 0x1000>;
+ };
+ };
+
soc: soc@ffe000000 {
#address-cells = <1>;
#size-cells = <1>;
fsl,num-laws = <32>;
};
- memory-controller@8000 {
+ ddr: memory-controller@8000 {
compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
reg = <0x8000 0x1000>;
interrupts = <16 2 1 23>;
--- /dev/null
+/*
+ * P3060QDS Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p3060si.dtsi"
+
+/ {
+ model = "fsl,P3060QDS";
+ compatible = "fsl,P3060QDS";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ memory {
+ device_type = "memory";
+ };
+
+ dcsr: dcsr@f00000000 {
+ ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+ };
+
+ soc: soc@ffe000000 {
+ spi@110000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25sl12801";
+ reg = <0>;
+ spi-max-frequency = <40000000>; /* input clock */
+ partition@u-boot {
+ label = "u-boot";
+ reg = <0x00000000 0x00100000>;
+ read-only;
+ };
+ partition@kernel {
+ label = "kernel";
+ reg = <0x00100000 0x00500000>;
+ read-only;
+ };
+ partition@dtb {
+ label = "dtb";
+ reg = <0x00600000 0x00100000>;
+ read-only;
+ };
+ partition@fs {
+ label = "file system";
+ reg = <0x00700000 0x00900000>;
+ };
+ };
+ flash@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,en25q32b";
+ reg = <1>;
+ spi-max-frequency = <40000000>; /* input clock */
+ partition@spi1 {
+ label = "spi1";
+ reg = <0x00000000 0x00400000>;
+ };
+ };
+ flash@2 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at45db081d";
+ reg = <2>;
+ spi-max-frequency = <40000000>; /* input clock */
+ partition@spi1 {
+ label = "spi2";
+ reg = <0x00000000 0x00100000>;
+ };
+ };
+ flash@3 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,sst25wf040";
+ reg = <3>;
+ spi-max-frequency = <40000000>; /* input clock */
+ partition@spi3 {
+ label = "spi3";
+ reg = <0x00000000 0x00080000>;
+ };
+ };
+ };
+
+ i2c@118000 {
+ eeprom@51 {
+ compatible = "at24,24c256";
+ reg = <0x51>;
+ };
+ eeprom@53 {
+ compatible = "at24,24c256";
+ reg = <0x53>;
+ };
+ rtc@68 {
+ compatible = "dallas,ds3232";
+ reg = <0x68>;
+ interrupts = <0x1 0x1 0 0>;
+ };
+ };
+
+ usb0: usb@210000 {
+ phy_type = "ulpi";
+ };
+
+ usb1: usb@211000 {
+ dr_mode = "host";
+ phy_type = "ulpi";
+ };
+ };
+
+ rapidio@ffe0c0000 {
+ reg = <0xf 0xfe0c0000 0 0x11000>;
+
+ port1 {
+ ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+ };
+ port2 {
+ ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+ };
+ };
+
+ localbus@ffe124000 {
+ reg = <0xf 0xfe124000 0 0x1000>;
+ ranges = <0 0 0xf 0xe8000000 0x08000000
+ 2 0 0xf 0xffa00000 0x00040000
+ 3 0 0xf 0xffdf0000 0x00008000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x08000000>;
+ bank-width = <2>;
+ device-width = <2>;
+ };
+
+ nand@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,elbc-fcm-nand";
+ reg = <0x2 0x0 0x40000>;
+
+ partition@0 {
+ label = "NAND U-Boot Image";
+ reg = <0x0 0x02000000>;
+ read-only;
+ };
+
+ partition@2000000 {
+ label = "NAND Root File System";
+ reg = <0x02000000 0x10000000>;
+ };
+
+ partition@12000000 {
+ label = "NAND Compressed RFS Image";
+ reg = <0x12000000 0x08000000>;
+ };
+
+ partition@1a000000 {
+ label = "NAND Linux Kernel Image";
+ reg = <0x1a000000 0x04000000>;
+ };
+
+ partition@1e000000 {
+ label = "NAND DTB Image";
+ reg = <0x1e000000 0x01000000>;
+ };
+
+ partition@1f000000 {
+ label = "NAND Writable User area";
+ reg = <0x1f000000 0x21000000>;
+ };
+ };
+
+ board-control@3,0 {
+ compatible = "fsl,p3060qds-fpga", "fsl,fpga-qixis";
+ reg = <3 0 0x100>;
+ };
+ };
+
+ pci0: pcie@ffe200000 {
+ reg = <0xf 0xfe200000 0 0x1000>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+ 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x20000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+
+ pci1: pcie@ffe201000 {
+ reg = <0xf 0xfe201000 0 0x1000>;
+ ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+ 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x20000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+};
--- /dev/null
+/*
+ * P3060 Silicon Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/ {
+ compatible = "fsl,P3060";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ccsr = &soc;
+ dcsr = &dcsr;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ dma0 = &dma0;
+ dma1 = &dma1;
+ msi0 = &msi0;
+ msi1 = &msi1;
+ msi2 = &msi2;
+
+ crypto = &crypto;
+ sec_jr0 = &sec_jr0;
+ sec_jr1 = &sec_jr1;
+ sec_jr2 = &sec_jr2;
+ sec_jr3 = &sec_jr3;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ sec_mon = &sec_mon;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e500mc@0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu1: PowerPC,e500mc@1 {
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu4: PowerPC,e500mc@4 {
+ device_type = "cpu";
+ reg = <4>;
+ next-level-cache = <&L2_4>;
+ L2_4: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu5: PowerPC,e500mc@5 {
+ device_type = "cpu";
+ reg = <5>;
+ next-level-cache = <&L2_5>;
+ L2_5: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu6: PowerPC,e500mc@6 {
+ device_type = "cpu";
+ reg = <6>;
+ next-level-cache = <&L2_6>;
+ L2_6: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu7: PowerPC,e500mc@7 {
+ device_type = "cpu";
+ reg = <7>;
+ next-level-cache = <&L2_7>;
+ L2_7: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ };
+
+ dcsr: dcsr@f00000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+
+ dcsr-epu@0 {
+ compatible = "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ interrupt-parent = <&mpic>;
+ reg = <0x0 0x1000>;
+ };
+ dcsr-npc {
+ compatible = "fsl,dcsr-npc";
+ reg = <0x1000 0x1000 0x1000000 0x8000>;
+ };
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0xB0000 0x1000>;
+ };
+ dcsr-dpaa@9000 {
+ compatible = "fsl,p3060-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+ dcsr-ocn@11000 {
+ compatible = "fsl,p3060-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr>;
+ reg = <0x12000 0x1000>;
+ };
+ dcsr-nal@18000 {
+ compatible = "fsl,p3060-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+ dcsr-rcpm@22000 {
+ compatible = "fsl,p3060-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@40000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x40000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@41000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x41000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@44000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu4>;
+ reg = <0x44000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@45000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu5>;
+ reg = <0x45000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@46000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu6>;
+ reg = <0x46000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@47000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu7>;
+ reg = <0x47000 0x1000>;
+ };
+ };
+
+ soc: soc@ffe000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
+
+ soc-sram-error {
+ compatible = "fsl,soc-sram-error";
+ interrupts = <16 2 1 29>;
+ };
+
+ corenet-law@0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <32>;
+ };
+
+ ddr: memory-controller@8000 {
+ compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 23>;
+ };
+
+ cpc: l3-cache-controller@10000 {
+ compatible = "fsl,p3060-l3-cache-controller", "cache";
+ reg = <0x10000 0x1000
+ 0x11000 0x1000>;
+ interrupts = <16 2 1 27>;
+ };
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 31>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
+
+ iommu@20000 {
+ compatible = "fsl,pamu-v1.0", "fsl,pamu";
+ reg = <0x20000 0x5000>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 30>;
+ };
+
+ mpic: pic@40000 {
+ clock-frequency = <0>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <4>;
+ reg = <0x40000 0x40000>;
+ compatible = "fsl,mpic", "chrp,open-pic";
+ device_type = "open-pic";
+ };
+
+ msi0: msi@41600 {
+ compatible = "fsl,mpic-msi";
+ reg = <0x41600 0x200>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe0 0 0 0
+ 0xe1 0 0 0
+ 0xe2 0 0 0
+ 0xe3 0 0 0
+ 0xe4 0 0 0
+ 0xe5 0 0 0
+ 0xe6 0 0 0
+ 0xe7 0 0 0>;
+ };
+
+ msi1: msi@41800 {
+ compatible = "fsl,mpic-msi";
+ reg = <0x41800 0x200>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe8 0 0 0
+ 0xe9 0 0 0
+ 0xea 0 0 0
+ 0xeb 0 0 0
+ 0xec 0 0 0
+ 0xed 0 0 0
+ 0xee 0 0 0
+ 0xef 0 0 0>;
+ };
+
+ msi2: msi@41a00 {
+ compatible = "fsl,mpic-msi";
+ reg = <0x41a00 0x200>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xf0 0 0 0
+ 0xf1 0 0 0
+ 0xf2 0 0 0
+ 0xf3 0 0 0
+ 0xf4 0 0 0
+ 0xf5 0 0 0
+ 0xf6 0 0 0
+ 0xf7 0 0 0>;
+ };
+
+ rmu: rmu@d3000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,srio-rmu";
+ reg = <0xd3000 0x500>;
+ ranges = <0x0 0xd3000 0x500>;
+
+ message-unit@0 {
+ compatible = "fsl,srio-msg-unit";
+ reg = <0x0 0x100>;
+ interrupts = <
+ 60 2 0 0 /* msg1_tx_irq */
+ 61 2 0 0>;/* msg1_rx_irq */
+ };
+ message-unit@100 {
+ compatible = "fsl,srio-msg-unit";
+ reg = <0x100 0x100>;
+ interrupts = <
+ 62 2 0 0 /* msg2_tx_irq */
+ 63 2 0 0>;/* msg2_rx_irq */
+ };
+ doorbell-unit@400 {
+ compatible = "fsl,srio-dbell-unit";
+ reg = <0x400 0x80>;
+ interrupts = <
+ 56 2 0 0 /* bell_outb_irq */
+ 57 2 0 0>;/* bell_inb_irq */
+ };
+ port-write-unit@4e0 {
+ compatible = "fsl,srio-port-write-unit";
+ reg = <0x4e0 0x20>;
+ interrupts = <16 2 1 11>;
+ };
+ };
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,qoriq-device-config-1.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ #sleep-cells = <1>;
+ fsl,liodn-bits = <12>;
+ };
+
+ pins: global-utilities@e0e00 {
+ compatible = "fsl,qoriq-pin-control-1.0";
+ reg = <0xe0e00 0x200>;
+ #sleep-cells = <2>;
+ };
+
+ clockgen: global-utilities@e1000 {
+ compatible = "fsl,p3060-clockgen", "fsl,qoriq-clockgen-1.0";
+ reg = <0xe1000 0x1000>;
+ clock-frequency = <0>;
+ };
+
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,qoriq-rcpm-1.0";
+ reg = <0xe2000 0x1000>;
+ #sleep-cells = <1>;
+ };
+
+ sfp: sfp@e8000 {
+ compatible = "fsl,p3060-sfp", "fsl,qoriq-sfp-1.0";
+ reg = <0xe8000 0x1000>;
+ };
+
+ serdes: serdes@ea000 {
+ compatible = "fsl,p3060-serdes";
+ reg = <0xea000 0x1000>;
+ };
+
+ dma0: dma@100300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p3060-dma", "fsl,eloplus-dma";
+ reg = <0x100300 0x4>;
+ ranges = <0x0 0x100100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,p3060-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupts = <28 2 0 0>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,p3060-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupts = <29 2 0 0>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,p3060-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupts = <30 2 0 0>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,p3060-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupts = <31 2 0 0>;
+ };
+ };
+
+ dma1: dma@101300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p3060-dma", "fsl,eloplus-dma";
+ reg = <0x101300 0x4>;
+ ranges = <0x0 0x101100 0x200>;
+ cell-index = <1>;
+ dma-channel@0 {
+ compatible = "fsl,p3060-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupts = <32 2 0 0>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,p3060-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupts = <33 2 0 0>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,p3060-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupts = <34 2 0 0>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,p3060-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupts = <35 2 0 0>;
+ };
+ };
+
+ spi@110000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,p3060-espi", "fsl,mpc8536-espi";
+ reg = <0x110000 0x1000>;
+ interrupts = <53 0x2 0 0>;
+ fsl,espi-num-chipselects = <4>;
+ };
+
+ i2c@118000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x118000 0x100>;
+ interrupts = <38 2 0 0>;
+ dfsrr;
+ };
+
+ i2c@118100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x118100 0x100>;
+ interrupts = <38 2 0 0>;
+ dfsrr;
+ };
+
+ i2c@119000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <2>;
+ compatible = "fsl-i2c";
+ reg = <0x119000 0x100>;
+ interrupts = <39 2 0 0>;
+ dfsrr;
+ };
+
+ i2c@119100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <3>;
+ compatible = "fsl-i2c";
+ reg = <0x119100 0x100>;
+ interrupts = <39 2 0 0>;
+ dfsrr;
+ };
+
+ serial0: serial@11c500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x11c500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <36 2 0 0>;
+ };
+
+ serial1: serial@11c600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x11c600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <36 2 0 0>;
+ };
+
+ serial2: serial@11d500 {
+ cell-index = <2>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x11d500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <37 2 0 0>;
+ };
+
+ serial3: serial@11d600 {
+ cell-index = <3>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x11d600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <37 2 0 0>;
+ };
+
+ gpio0: gpio@130000 {
+ compatible = "fsl,p3060-gpio", "fsl,qoriq-gpio";
+ reg = <0x130000 0x1000>;
+ interrupts = <55 2 0 0>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ usb0: usb@210000 {
+ compatible = "fsl,p3060-usb2-mph",
+ "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+ reg = <0x210000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <44 0x2 0 0>;
+ };
+
+ usb1: usb@211000 {
+ compatible = "fsl,p3060-usb2-dr",
+ "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+ reg = <0x211000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <45 0x2 0 0>;
+ };
+
+ crypto: crypto@300000 {
+ compatible = "fsl,sec-v4.1", "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x300000 0x10000>;
+ ranges = <0 0x300000 0x10000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <92 2 0 0>;
+
+ sec_jr0: jr@1000 {
+ compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <88 2 0 0>;
+ };
+
+ sec_jr1: jr@2000 {
+ compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <89 2 0 0>;
+ };
+
+ sec_jr2: jr@3000 {
+ compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <90 2 0 0>;
+ };
+
+ sec_jr3: jr@4000 {
+ compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
+ reg = <0x4000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <91 2 0 0>;
+ };
+
+ rtic@6000 {
+ compatible = "fsl,sec-v4.1-rtic", "fsl,sec-v4.0-rtic";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x6000 0x100>;
+ ranges = <0x0 0x6100 0xe00>;
+
+ rtic_a: rtic-a@0 {
+ compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
+ reg = <0x00 0x20 0x100 0x80>;
+ };
+
+ rtic_b: rtic-b@20 {
+ compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
+ reg = <0x20 0x20 0x200 0x80>;
+ };
+
+ rtic_c: rtic-c@40 {
+ compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
+ reg = <0x40 0x20 0x300 0x80>;
+ };
+
+ rtic_d: rtic-d@60 {
+ compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
+ reg = <0x60 0x20 0x500 0x80>;
+ };
+ };
+ };
+
+ sec_mon: sec_mon@314000 {
+ compatible = "fsl,sec-v4.1-mon", "fsl,sec-v4.0-mon";
+ reg = <0x314000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <93 2 0 0>;
+ };
+ };
+
+ rapidio@ffe0c0000 {
+ compatible = "fsl,srio";
+ interrupts = <16 2 1 11>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ fsl,srio-rmu-handle = <&rmu>;
+ ranges;
+
+ port1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <1>;
+ };
+
+ port2 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <2>;
+ };
+ };
+
+ localbus@ffe124000 {
+ compatible = "fsl,p3060-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <25 2 0 0>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ };
+
+ pci0: pcie@ffe200000 {
+ compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ fsl,msi = <&msi0>;
+ interrupts = <16 2 1 15>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 15>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ };
+ };
+
+ pci1: pcie@ffe201000 {
+ compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ clock-frequency = <33333333>;
+ fsl,msi = <&msi1>;
+ interrupts = <16 2 1 14>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 14>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 41 1 0 0
+ 0000 0 0 2 &mpic 5 1 0 0
+ 0000 0 0 3 &mpic 6 1 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
+ >;
+ };
+ };
+};
device_type = "memory";
};
+ dcsr: dcsr@f00000000 {
+ ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+ };
+
soc: soc@ffe000000 {
spi@110000 {
flash@0 {
localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
- ranges = <0 0 0xf 0xe8000000 0x08000000>;
+ ranges = <0 0 0xf 0xe8000000 0x08000000
+ 3 0 0xf 0xffdf0000 0x00008000>;
flash@0,0 {
compatible = "cfi-flash";
bank-width = <2>;
device-width = <2>;
};
+
+ board-control@3,0 {
+ compatible = "fsl,p4080ds-fpga", "fsl,fpga-ngpixis";
+ reg = <3 0 0x30>;
+ };
};
pci0: pcie@ffe200000 {
aliases {
ccsr = &soc;
+ dcsr = &dcsr;
serial0 = &serial0;
serial1 = &serial1;
#address-cells = <1>;
#size-cells = <0>;
- cpu0: PowerPC,4080@0 {
+ cpu0: PowerPC,e500mc@0 {
device_type = "cpu";
reg = <0>;
next-level-cache = <&L2_0>;
next-level-cache = <&cpc>;
};
};
- cpu1: PowerPC,4080@1 {
+ cpu1: PowerPC,e500mc@1 {
device_type = "cpu";
reg = <1>;
next-level-cache = <&L2_1>;
next-level-cache = <&cpc>;
};
};
- cpu2: PowerPC,4080@2 {
+ cpu2: PowerPC,e500mc@2 {
device_type = "cpu";
reg = <2>;
next-level-cache = <&L2_2>;
next-level-cache = <&cpc>;
};
};
- cpu3: PowerPC,4080@3 {
+ cpu3: PowerPC,e500mc@3 {
device_type = "cpu";
reg = <3>;
next-level-cache = <&L2_3>;
next-level-cache = <&cpc>;
};
};
- cpu4: PowerPC,4080@4 {
+ cpu4: PowerPC,e500mc@4 {
device_type = "cpu";
reg = <4>;
next-level-cache = <&L2_4>;
next-level-cache = <&cpc>;
};
};
- cpu5: PowerPC,4080@5 {
+ cpu5: PowerPC,e500mc@5 {
device_type = "cpu";
reg = <5>;
next-level-cache = <&L2_5>;
next-level-cache = <&cpc>;
};
};
- cpu6: PowerPC,4080@6 {
+ cpu6: PowerPC,e500mc@6 {
device_type = "cpu";
reg = <6>;
next-level-cache = <&L2_6>;
next-level-cache = <&cpc>;
};
};
- cpu7: PowerPC,4080@7 {
+ cpu7: PowerPC,e500mc@7 {
device_type = "cpu";
reg = <7>;
next-level-cache = <&L2_7>;
};
};
+ dcsr: dcsr@f00000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+
+ dcsr-epu@0 {
+ compatible = "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ interrupt-parent = <&mpic>;
+ reg = <0x0 0x1000>;
+ };
+ dcsr-npc {
+ compatible = "fsl,dcsr-npc";
+ reg = <0x1000 0x1000 0x1000000 0x8000>;
+ };
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0xB0000 0x1000>;
+ };
+ dcsr-dpaa@9000 {
+ compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+ dcsr-ocn@11000 {
+ compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr1>;
+ reg = <0x12000 0x1000>;
+ };
+ dcsr-ddr@13000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr2>;
+ reg = <0x13000 0x1000>;
+ };
+ dcsr-nal@18000 {
+ compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+ dcsr-rcpm@22000 {
+ compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@40000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x40000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@41000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x41000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@42000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu2>;
+ reg = <0x42000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@43000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu3>;
+ reg = <0x43000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@44000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu4>;
+ reg = <0x44000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@45000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu5>;
+ reg = <0x45000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@46000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu6>;
+ reg = <0x46000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@47000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu7>;
+ reg = <0x47000 0x1000>;
+ };
+ };
+
soc: soc@ffe000000 {
#address-cells = <1>;
#size-cells = <1>;
fsl,num-laws = <32>;
};
- memory-controller@8000 {
+ ddr1: memory-controller@8000 {
compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
reg = <0x8000 0x1000>;
interrupts = <16 2 1 23>;
};
- memory-controller@9000 {
+ ddr2: memory-controller@9000 {
compatible = "fsl,qoriq-memory-controller-v4.4","fsl,qoriq-memory-controller";
reg = <0x9000 0x1000>;
interrupts = <16 2 1 22>;
device_type = "memory";
};
+ dcsr: dcsr@f00000000 {
+ ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+ };
+
soc: soc@ffe000000 {
spi@110000 {
flash@0 {
};
board-control@3,0 {
- compatible = "fsl,p5020ds-pixis";
- reg = <3 0 0x20>;
+ compatible = "fsl,p5020ds-fpga", "fsl,fpga-ngpixis";
+ reg = <3 0 0x30>;
};
};
aliases {
ccsr = &soc;
+ dcsr = &dcsr;
serial0 = &serial0;
serial1 = &serial1;
};
};
+ dcsr: dcsr@f00000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+
+ dcsr-epu@0 {
+ compatible = "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ interrupt-parent = <&mpic>;
+ reg = <0x0 0x1000>;
+ };
+ dcsr-npc {
+ compatible = "fsl,dcsr-npc";
+ reg = <0x1000 0x1000 0x1000000 0x8000>;
+ };
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0xB0000 0x1000>;
+ };
+ dcsr-dpaa@9000 {
+ compatible = "fsl,p5020-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+ dcsr-ocn@11000 {
+ compatible = "fsl,p5020-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr1>;
+ reg = <0x12000 0x1000>;
+ };
+ dcsr-ddr@13000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr2>;
+ reg = <0x13000 0x1000>;
+ };
+ dcsr-nal@18000 {
+ compatible = "fsl,p5020-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+ dcsr-rcpm@22000 {
+ compatible = "fsl,p5020-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@40000 {
+ compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x40000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@41000 {
+ compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x41000 0x1000>;
+ };
+ };
+
soc: soc@ffe000000 {
#address-cells = <1>;
#size-cells = <1>;
fsl,num-laws = <32>;
};
- memory-controller@8000 {
+ ddr1: memory-controller@8000 {
compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
reg = <0x8000 0x1000>;
interrupts = <16 2 1 23>;
};
- memory-controller@9000 {
+ ddr2: memory-controller@9000 {
compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
reg = <0x9000 0x1000>;
interrupts = <16 2 1 22>;
};
localbus@ff705000 {
- compatible = "fsl,mpc8560-localbus";
+ compatible = "fsl,mpc8560-localbus", "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
reg = <0xff705000 0x100>; // BRx, ORx, etc.
clock-frequency = <0>; /* Filled in by zImage */
interrupts = <0x5 0x1>;
interrupt-parent = <&UIC1>;
+
+ nor_flash@0,0 {
+ compatible = "amd,s29gl256n", "cfi-flash";
+ bank-width = <2>;
+ reg = <0x00000000 0x00000000 0x04000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "kernel";
+ reg = <0x00000000 0x001e0000>;
+ };
+ partition@1e0000 {
+ label = "dtb";
+ reg = <0x001e0000 0x00020000>;
+ };
+ partition@200000 {
+ label = "ramdisk";
+ reg = <0x00200000 0x01400000>;
+ };
+ partition@1600000 {
+ label = "jffs2";
+ reg = <0x01600000 0x00400000>;
+ };
+ partition@1a00000 {
+ label = "user";
+ reg = <0x01a00000 0x02540000>;
+ };
+ partition@3f40000 {
+ label = "env";
+ reg = <0x03f40000 0x00040000>;
+ };
+ partition@3f80000 {
+ label = "u-boot";
+ reg = <0x03f80000 0x00080000>;
+ };
+ };
};
UART0: serial@ef600300 {
+++ /dev/null
-CONFIG_40x=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_HCU4=y
-# CONFIG_WALNUT is not set
-CONFIG_SPARSE_IRQ=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_CONNECTOR=y
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_OF_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_PROC_DEVICETREE=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=35000
-CONFIG_NETDEVICES=y
-CONFIG_ETHERNET=y
-CONFIG_NET_VENDOR_IBM=y
-CONFIG_IBM_EMAC=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
+CONFIG_SPARSE_IRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
+CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
# CONFIG_EPOLL is not set
CONFIG_PPC_MPC5200_BUGFIX=y
# CONFIG_PPC_PMAC is not set
CONFIG_PPC_BESTCOMM=y
-CONFIG_SPARSE_IRQ=y
CONFIG_PM=y
# CONFIG_PCI is not set
CONFIG_NET=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_ROM=y
CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_PLATRAM=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_MISC_DEVICES is not set
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
CONFIG_ATA=y
CONFIG_PATA_PLATFORM=y
CONFIG_NETDEVICES=y
CONFIG_LXT_PHY=y
+CONFIG_FIXED_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_FEC_MPC52xx=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
CONFIG_SERIAL_MPC52xx=y
CONFIG_SERIAL_MPC52xx_CONSOLE=y
CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MPC=y
+CONFIG_SENSORS_LM80=y
CONFIG_WATCHDOG=y
+CONFIG_MFD_SM501=y
+CONFIG_FB=y
+CONFIG_FB_FOREIGN_ENDIAN=y
+CONFIG_FB_SM501=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_STORAGE=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_DS1374=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_INOTIFY=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_PROC_KCORE=y
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_QUICC_ENGINE=y
CONFIG_QE_GPIO=y
CONFIG_CPM2=y
-CONFIG_MPC8xxx_GPIO=y
+CONFIG_GPIO_MPC8XXX=y
CONFIG_HIGHMEM=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_MODVERSIONS=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_XES_MPC85xx=y
-CONFIG_MPC8xxx_GPIO=y
+CONFIG_GPIO_MPC8XXX=y
CONFIG_HIGHMEM=y
CONFIG_MATH_EMULATION=y
CONFIG_SPARSE_IRQ=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
CONFIG_SLAB=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_BLK_DEV_BSG is not set
-CONFIG_P2040_RDB=y
+CONFIG_P2041_RDB=y
CONFIG_P3041_DS=y
+CONFIG_P3060_QDS=y
CONFIG_P4080_DS=y
CONFIG_P5020_DS=y
CONFIG_HIGHMEM=y
CONFIG_IP_SCTP=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_LEGACY_PTYS is not set
-CONFIG_PPC_EPAPR_HV_BYTECHAN=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_USB_STORAGE=y
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_OF=y
-CONFIG_MMC_SDHCI_OF_ESDHC=y
CONFIG_EDAC=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_MPC85XX=y
CONFIG_RTC_DRV_CMOS=y
CONFIG_UIO=y
CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_FSL_HV_MANAGER=y
CONFIG_EXT2_FS=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=m
CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_INFO=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EXPERT=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BINFMT_MISC=m
-# CONFIG_PCI is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_CRC_ITU_T=m
CONFIG_FRAME_WARN=1024
CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_VIRQ_DEBUG=y
CONFIG_CRYPTO_PCBC=m
+CONFIG_EXPERIMENTAL=y
+# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
CONFIG_SPARSE_IRQ=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
+# CONFIG_RD_GZIP is not set
CONFIG_KALLSYMS_ALL=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_EMBEDDED=y
CONFIG_SLAB=y
# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_PPC_PMAC is not set
CONFIG_PPC_82xx=y
CONFIG_MGCOGE=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_BINFMT_MISC=y
# CONFIG_SECCOMP is not set
CONFIG_NET=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
+CONFIG_TIPC=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
-# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_FIXED_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_FS_ENET_MDIO_FCC=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
CONFIG_SERIAL_CPM_CONSOLE=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
-# CONFIG_I2C_POWERMAC is not set
CONFIG_I2C_CPM=y
# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_FSL_USB2=y
+CONFIG_USB_G_SERIAL=y
+CONFIG_UIO=y
+CONFIG_UIO_PDRV=y
CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
CONFIG_AUTOFS4_FS=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_CRAMFS=y
+CONFIG_SQUASHFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_MAC_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_UTF8=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_DEBUG_INFO=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_EXPERIMENTAL=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
+CONFIG_SPARSE_IRQ=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
CONFIG_MODULES=y
# CONFIG_PPC_CHRP is not set
CONFIG_PPC_MPC512x=y
CONFIG_MPC5121_ADS=y
+CONFIG_MPC5121_GENERIC=y
+CONFIG_PDM360NG=y
# CONFIG_PPC_PMAC is not set
CONFIG_NO_HZ=y
CONFIG_HZ_1000=y
-CONFIG_SPARSE_IRQ=y
# CONFIG_MIGRATION is not set
# CONFIG_SECCOMP is not set
# CONFIG_PCI is not set
CONFIG_CAN_RAW=y
CONFIG_CAN_BCM=y
CONFIG_CAN_VCAN=y
-CONFIG_CAN_DEV=y
CONFIG_CAN_MSCAN=y
CONFIG_CAN_DEBUG_DEVICES=y
# CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_BLK_DEV_XIP=y
CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_AT25=y
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MPC=y
+CONFIG_SPI=y
+CONFIG_SPI_MPC512x_PSC=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_MPC8XXX=y
# CONFIG_HWMON is not set
CONFIG_MEDIA_SUPPORT=y
CONFIG_VIDEO_DEV=y
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
CONFIG_VIDEO_ADV_DEBUG=y
# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
CONFIG_VIDEO_SAA711X=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_PCI is not set
+# CONFIG_SND_PPC is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_MPC5200_I2S=y
+CONFIG_SND_MPC52xx_SOC_PCM030=y
+CONFIG_SND_MPC52xx_SOC_EFIKA=y
CONFIG_HID_DRAGONRISE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EXPERT=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_SBC8548=y
CONFIG_QUICC_ENGINE=y
CONFIG_QE_GPIO=y
-CONFIG_MPC8xxx_GPIO=y
CONFIG_HIGHMEM=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_I2C=y
CONFIG_I2C_CPM=m
CONFIG_I2C_MPC=y
+CONFIG_GPIO_MPC8XXX=y
# CONFIG_HWMON is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_MAC_PARTITION=y
CONFIG_CRC_T10DIF=y
CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_INFO=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EXPERT=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_SBC8548=y
CONFIG_QUICC_ENGINE=y
CONFIG_QE_GPIO=y
-CONFIG_MPC8xxx_GPIO=y
CONFIG_HIGHMEM=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_I2C=y
CONFIG_I2C_CPM=m
CONFIG_I2C_MPC=y
+CONFIG_GPIO_MPC8XXX=y
# CONFIG_HWMON is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_MAC_PARTITION=y
CONFIG_CRC_T10DIF=y
CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_VIRQ_DEBUG=y
CONFIG_CRYPTO_PCBC=m
CONFIG_PPC4xx_GPIO=y
CONFIG_ACADIA=y
CONFIG_EP405=y
-CONFIG_HCU4=y
CONFIG_HOTFOOT=y
CONFIG_KILAUEA=y
CONFIG_MAKALU=y
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM_BOOK3S_64=m
+CONFIG_KVM_BOOK3S_64_HV=y
+CONFIG_VHOST_NET=m
CONFIG_QUICC_ENGINE=y
CONFIG_QE_GPIO=y
CONFIG_PPC_BESTCOMM=y
-CONFIG_MPC8xxx_GPIO=y
+CONFIG_GPIO_MPC8XXX=y
CONFIG_MCU_MPC8349EMITX=m
CONFIG_HIGHMEM=y
CONFIG_NO_HZ=y
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM_BOOK3S_64=m
+CONFIG_KVM_BOOK3S_64_HV=y
+CONFIG_VHOST_NET=m
int t;
__asm__ __volatile__(
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: lwarx %0,0,%2 # atomic_add_return\n\
add %0,%1,%0\n"
PPC405_ERR77(0,%2)
" stwcx. %0,0,%2 \n\
bne- 1b"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
: "=&r" (t)
: "r" (a), "r" (&v->counter)
: "cc", "memory");
int t;
__asm__ __volatile__(
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: lwarx %0,0,%2 # atomic_sub_return\n\
subf %0,%1,%0\n"
PPC405_ERR77(0,%2)
" stwcx. %0,0,%2 \n\
bne- 1b"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
: "=&r" (t)
: "r" (a), "r" (&v->counter)
: "cc", "memory");
int t;
__asm__ __volatile__(
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: lwarx %0,0,%1 # atomic_inc_return\n\
addic %0,%0,1\n"
PPC405_ERR77(0,%1)
" stwcx. %0,0,%1 \n\
bne- 1b"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
: "=&r" (t)
: "r" (&v->counter)
: "cc", "xer", "memory");
int t;
__asm__ __volatile__(
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: lwarx %0,0,%1 # atomic_dec_return\n\
addic %0,%0,-1\n"
PPC405_ERR77(0,%1)
" stwcx. %0,0,%1\n\
bne- 1b"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
: "=&r" (t)
: "r" (&v->counter)
: "cc", "xer", "memory");
int t;
__asm__ __volatile__ (
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: lwarx %0,0,%1 # __atomic_add_unless\n\
cmpw 0,%0,%3 \n\
beq- 2f \n\
PPC405_ERR77(0,%2)
" stwcx. %0,0,%1 \n\
bne- 1b \n"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
" subf %0,%2,%0 \n\
2:"
: "=&r" (t)
int t;
__asm__ __volatile__(
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: lwarx %0,0,%1 # atomic_dec_if_positive\n\
cmpwi %0,1\n\
addi %0,%0,-1\n\
PPC405_ERR77(0,%1)
" stwcx. %0,0,%1\n\
bne- 1b"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
"\n\
2:" : "=&b" (t)
: "r" (&v->counter)
long t;
__asm__ __volatile__(
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: ldarx %0,0,%2 # atomic64_add_return\n\
add %0,%1,%0\n\
stdcx. %0,0,%2 \n\
bne- 1b"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
: "=&r" (t)
: "r" (a), "r" (&v->counter)
: "cc", "memory");
long t;
__asm__ __volatile__(
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: ldarx %0,0,%2 # atomic64_sub_return\n\
subf %0,%1,%0\n\
stdcx. %0,0,%2 \n\
bne- 1b"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
: "=&r" (t)
: "r" (a), "r" (&v->counter)
: "cc", "memory");
long t;
__asm__ __volatile__(
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: ldarx %0,0,%1 # atomic64_inc_return\n\
addic %0,%0,1\n\
stdcx. %0,0,%1 \n\
bne- 1b"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
: "=&r" (t)
: "r" (&v->counter)
: "cc", "xer", "memory");
long t;
__asm__ __volatile__(
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: ldarx %0,0,%1 # atomic64_dec_return\n\
addic %0,%0,-1\n\
stdcx. %0,0,%1\n\
bne- 1b"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
: "=&r" (t)
: "r" (&v->counter)
: "cc", "xer", "memory");
long t;
__asm__ __volatile__(
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: ldarx %0,0,%1 # atomic64_dec_if_positive\n\
addic. %0,%0,-1\n\
blt- 2f\n\
stdcx. %0,0,%1\n\
bne- 1b"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
"\n\
2:" : "=&r" (t)
: "r" (&v->counter)
long t;
__asm__ __volatile__ (
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: ldarx %0,0,%1 # __atomic_add_unless\n\
cmpd 0,%0,%3 \n\
beq- 2f \n\
add %0,%2,%0 \n"
" stdcx. %0,0,%1 \n\
bne- 1b \n"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
" subf %0,%2,%0 \n\
2:"
: "=&r" (t)
return (old & mask); \
}
-DEFINE_TESTOP(test_and_set_bits, or, PPC_RELEASE_BARRIER,
- PPC_ACQUIRE_BARRIER, 0)
+DEFINE_TESTOP(test_and_set_bits, or, PPC_ATOMIC_ENTRY_BARRIER,
+ PPC_ATOMIC_EXIT_BARRIER, 0)
DEFINE_TESTOP(test_and_set_bits_lock, or, "",
PPC_ACQUIRE_BARRIER, 1)
-DEFINE_TESTOP(test_and_clear_bits, andc, PPC_RELEASE_BARRIER,
- PPC_ACQUIRE_BARRIER, 0)
-DEFINE_TESTOP(test_and_change_bits, xor, PPC_RELEASE_BARRIER,
- PPC_ACQUIRE_BARRIER, 0)
+DEFINE_TESTOP(test_and_clear_bits, andc, PPC_ATOMIC_ENTRY_BARRIER,
+ PPC_ATOMIC_EXIT_BARRIER, 0)
+DEFINE_TESTOP(test_and_change_bits, xor, PPC_ATOMIC_ENTRY_BARRIER,
+ PPC_ATOMIC_EXIT_BARRIER, 0)
static __inline__ int test_and_set_bit(unsigned long nr,
volatile unsigned long *addr)
u64 dma_mask;
};
+#define ARCH_HAS_DMA_GET_REQUIRED_MASK
+
#endif /* _ASM_POWERPC_DEVICE_H */
#define FW_FEATURE_CMO ASM_CONST(0x0000000002000000)
#define FW_FEATURE_VPHN ASM_CONST(0x0000000004000000)
#define FW_FEATURE_XCMO ASM_CONST(0x0000000008000000)
+#define FW_FEATURE_OPAL ASM_CONST(0x0000000010000000)
+#define FW_FEATURE_OPALv2 ASM_CONST(0x0000000020000000)
#ifndef __ASSEMBLY__
FW_FEATURE_PSERIES_ALWAYS = 0,
FW_FEATURE_ISERIES_POSSIBLE = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
FW_FEATURE_ISERIES_ALWAYS = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
+ FW_FEATURE_POWERNV_POSSIBLE = FW_FEATURE_OPAL | FW_FEATURE_OPALv2,
+ FW_FEATURE_POWERNV_ALWAYS = 0,
FW_FEATURE_PS3_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,
FW_FEATURE_PS3_ALWAYS = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,
FW_FEATURE_CELLEB_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_BEAT,
#ifdef CONFIG_PPC_ISERIES
FW_FEATURE_ISERIES_POSSIBLE |
#endif
+#ifdef CONFIG_PPC_POWERNV
+ FW_FEATURE_POWERNV_POSSIBLE |
+#endif
#ifdef CONFIG_PPC_PS3
FW_FEATURE_PS3_POSSIBLE |
#endif
#ifdef CONFIG_PPC_ISERIES
FW_FEATURE_ISERIES_ALWAYS &
#endif
+#ifdef CONFIG_PPC_POWERNV
+ FW_FEATURE_POWERNV_ALWAYS &
+#endif
#ifdef CONFIG_PPC_PS3
FW_FEATURE_PS3_ALWAYS &
#endif
{
if (can_use_virtual_dma)
return request_irq(FLOPPY_IRQ, floppy_hardint,
- IRQF_DISABLED, "floppy", NULL);
+ 0, "floppy", NULL);
else
return request_irq(FLOPPY_IRQ, floppy_interrupt,
- IRQF_DISABLED, "floppy", NULL);
+ 0, "floppy", NULL);
}
static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
__asm__ __volatile ( \
- PPC_RELEASE_BARRIER \
+ PPC_ATOMIC_ENTRY_BARRIER \
"1: lwarx %0,0,%2\n" \
insn \
PPC405_ERR77(0, %2) \
"2: stwcx. %1,0,%2\n" \
"bne- 1b\n" \
+ PPC_ATOMIC_EXIT_BARRIER \
"li %1,0\n" \
"3: .section .fixup,\"ax\"\n" \
"4: li %1,%3\n" \
return -EFAULT;
__asm__ __volatile__ (
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: lwarx %1,0,%3 # futex_atomic_cmpxchg_inatomic\n\
cmpw 0,%1,%4\n\
bne- 3f\n"
PPC405_ERR77(0,%3)
"2: stwcx. %5,0,%3\n\
bne- 1b\n"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
"3: .section .fixup,\"ax\"\n\
4: li %0,%6\n\
b 3b\n\
#ifndef _ASM_POWERPC_HUGETLB_H
#define _ASM_POWERPC_HUGETLB_H
+#ifdef CONFIG_HUGETLB_PAGE
#include <asm/page.h>
+extern struct kmem_cache *hugepte_cache;
+extern void __init reserve_hugetlb_gpages(void);
+
+static inline pte_t *hugepd_page(hugepd_t hpd)
+{
+ BUG_ON(!hugepd_ok(hpd));
+ return (pte_t *)((hpd.pd & ~HUGEPD_SHIFT_MASK) | PD_HUGE);
+}
+
+static inline unsigned int hugepd_shift(hugepd_t hpd)
+{
+ return hpd.pd & HUGEPD_SHIFT_MASK;
+}
+
+static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr,
+ unsigned pdshift)
+{
+ /*
+ * On 32-bit, we have multiple higher-level table entries that point to
+ * the same hugepte. Just use the first one since they're all
+ * identical. So for that case, idx=0.
+ */
+ unsigned long idx = 0;
+
+ pte_t *dir = hugepd_page(*hpdp);
+#ifdef CONFIG_PPC64
+ idx = (addr & ((1UL << pdshift) - 1)) >> hugepd_shift(*hpdp);
+#endif
+
+ return dir + idx;
+}
+
pte_t *huge_pte_offset_and_shift(struct mm_struct *mm,
unsigned long addr, unsigned *shift);
void flush_dcache_icache_hugepage(struct page *page);
+#if defined(CONFIG_PPC_MM_SLICES) || defined(CONFIG_PPC_SUBPAGE_PROT)
int is_hugepage_only_range(struct mm_struct *mm, unsigned long addr,
unsigned long len);
+#else
+static inline int is_hugepage_only_range(struct mm_struct *mm,
+ unsigned long addr,
+ unsigned long len)
+{
+ return 0;
+}
+#endif
+
+void book3e_hugetlb_preload(struct mm_struct *mm, unsigned long ea, pte_t pte);
+void flush_hugetlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
void hugetlb_free_pgd_range(struct mmu_gather *tlb, unsigned long addr,
unsigned long end, unsigned long floor,
static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
unsigned long addr, pte_t *ptep)
{
- unsigned long old = pte_update(mm, addr, ptep, ~0UL, 1);
- return __pte(old);
+#ifdef CONFIG_PPC64
+ return __pte(pte_update(mm, addr, ptep, ~0UL, 1));
+#else
+ return __pte(pte_update(ptep, ~0UL, 0));
+#endif
}
static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
{
}
+#else /* ! CONFIG_HUGETLB_PAGE */
+static inline void reserve_hugetlb_gpages(void)
+{
+ pr_err("Cannot reserve gpages without hugetlb enabled\n");
+}
+static inline void flush_hugetlb_page(struct vm_area_struct *vma,
+ unsigned long vmaddr)
+{
+}
+#endif
+
#endif /* _ASM_POWERPC_HUGETLB_H */
#define _ASM_POWERPC_KEXEC_H
#ifdef __KERNEL__
-#ifdef CONFIG_FSL_BOOKE
+#if defined(CONFIG_FSL_BOOKE) || defined(CONFIG_44x)
/*
* On FSL-BookE we setup a 1:1 mapping which covers the first 2GiB of memory
#define KVM_SREGS_E_UPDATE_DEC (1 << 2)
#define KVM_SREGS_E_UPDATE_DBSR (1 << 3)
-/*
- * Book3S special bits to indicate contents in the struct by maintaining
- * backwards compatibility with older structs. If adding a new field,
- * please make sure to add a flag for that new field */
-#define KVM_SREGS_S_HIOR (1 << 0)
-
/*
* In KVM_SET_SREGS, reserved/pad fields must be left untouched from a
* previous KVM_GET_REGS.
__u64 ibat[8];
__u64 dbat[8];
} ppc32;
- __u64 flags; /* KVM_SREGS_S_ */
- __u64 hior;
} s;
struct {
union {
#endif
int context_id[SID_CONTEXTS];
- bool hior_sregs; /* HIOR is set by SREGS, not PVR */
-
struct hlist_head hpte_hash_pte[HPTEG_HASH_NUM_PTE];
struct hlist_head hpte_hash_pte_long[HPTEG_HASH_NUM_PTE_LONG];
struct hlist_head hpte_hash_vpte[HPTEG_HASH_NUM_VPTE];
#if !defined(__ASSEMBLY__)
#include <linux/types.h>
+#include <linux/export.h>
/* lv1 call declaration macros */
LV1_CALL(gpu_context_iomap, 5, 0, 221 )
LV1_CALL(gpu_context_attribute, 6, 0, 225 )
LV1_CALL(gpu_context_intr, 1, 1, 227 )
-LV1_CALL(gpu_attribute, 5, 0, 228 )
+LV1_CALL(gpu_attribute, 3, 0, 228 )
LV1_CALL(get_rtc, 0, 2, 232 )
LV1_CALL(set_ppe_periodic_tracer_frequency, 1, 0, 240 )
LV1_CALL(start_ppe_periodic_tracer, 5, 0, 241 )
#include <linux/seq_file.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
+#include <linux/export.h>
#include <asm/setup.h>
void (*pci_dma_dev_setup)(struct pci_dev *dev);
void (*pci_dma_bus_setup)(struct pci_bus *bus);
- /* Platform set_dma_mask override */
+ /* Platform set_dma_mask and dma_get_required_mask overrides */
int (*dma_set_mask)(struct device *dev, u64 dma_mask);
+ u64 (*dma_get_required_mask)(struct device *dev);
int (*probe)(void);
void (*setup_arch)(void); /* Optional, may be NULL */
#define MAS2_M 0x00000004
#define MAS2_G 0x00000002
#define MAS2_E 0x00000001
+#define MAS2_WIMGE_MASK 0x0000001f
#define MAS2_EPN_MASK(size) (~0 << (size + 10))
#define MAS2_VAL(addr, size, flags) ((addr) & MAS2_EPN_MASK(size) | (flags))
#define MAS3_SW 0x00000004
#define MAS3_UR 0x00000002
#define MAS3_SR 0x00000001
+#define MAS3_BAP_MASK 0x0000003f
#define MAS3_SPSIZE 0x0000003e
#define MAS3_SPSIZE_SHIFT 1
unsigned int id;
unsigned int active;
unsigned long vdso_base;
+#ifdef CONFIG_PPC_MM_SLICES
+ u64 low_slices_psize; /* SLB page size encodings */
+ u64 high_slices_psize; /* 4 bits per slice for now */
+ u16 user_psize; /* page size index */
+#endif
} mm_context_t;
/* Page size definitions, common between 32 and 64-bit
extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
unsigned long pstart, unsigned long prot,
int psize, int ssize);
-extern void add_gpage(unsigned long addr, unsigned long page_size,
- unsigned long number_of_pages);
+extern void add_gpage(u64 addr, u64 page_size, unsigned long number_of_pages);
extern void demote_segment_4k(struct mm_struct *mm, unsigned long addr);
extern void hpte_init_native(void);
#define MMU_PAGE_64K_AP 3 /* "Admixed pages" (hash64 only) */
#define MMU_PAGE_256K 4
#define MMU_PAGE_1M 5
-#define MMU_PAGE_8M 6
-#define MMU_PAGE_16M 7
-#define MMU_PAGE_256M 8
-#define MMU_PAGE_1G 9
-#define MMU_PAGE_16G 10
-#define MMU_PAGE_64G 11
-#define MMU_PAGE_COUNT 12
-
+#define MMU_PAGE_4M 6
+#define MMU_PAGE_8M 7
+#define MMU_PAGE_16M 8
+#define MMU_PAGE_64M 9
+#define MMU_PAGE_256M 10
+#define MMU_PAGE_1G 11
+#define MMU_PAGE_16G 12
+#define MMU_PAGE_64G 13
+
+#define MMU_PAGE_COUNT 14
#if defined(CONFIG_PPC_STD_MMU_64)
/* 64-bit classic hash table MMU */
unsigned int irq_count;
/* Number of sources */
unsigned int num_sources;
- /* Number of CPUs */
- unsigned int num_cpus;
/* default senses array */
unsigned char *senses;
unsigned int senses_count;
--- /dev/null
+/*
+ * PowerNV OPAL definitions.
+ *
+ * Copyright 2011 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __OPAL_H
+#define __OPAL_H
+
+/****** Takeover interface ********/
+
+/* PAPR H-Call used to querty the HAL existence and/or instanciate
+ * it from within pHyp (tech preview only).
+ *
+ * This is exclusively used in prom_init.c
+ */
+
+#ifndef __ASSEMBLY__
+
+struct opal_takeover_args {
+ u64 k_image; /* r4 */
+ u64 k_size; /* r5 */
+ u64 k_entry; /* r6 */
+ u64 k_entry2; /* r7 */
+ u64 hal_addr; /* r8 */
+ u64 rd_image; /* r9 */
+ u64 rd_size; /* r10 */
+ u64 rd_loc; /* r11 */
+};
+
+extern long opal_query_takeover(u64 *hal_size, u64 *hal_align);
+
+extern long opal_do_takeover(struct opal_takeover_args *args);
+
+struct rtas_args;
+extern int opal_enter_rtas(struct rtas_args *args,
+ unsigned long data,
+ unsigned long entry);
+
+#endif /* __ASSEMBLY__ */
+
+/****** OPAL APIs ******/
+
+/* Return codes */
+#define OPAL_SUCCESS 0
+#define OPAL_PARAMETER -1
+#define OPAL_BUSY -2
+#define OPAL_PARTIAL -3
+#define OPAL_CONSTRAINED -4
+#define OPAL_CLOSED -5
+#define OPAL_HARDWARE -6
+#define OPAL_UNSUPPORTED -7
+#define OPAL_PERMISSION -8
+#define OPAL_NO_MEM -9
+#define OPAL_RESOURCE -10
+#define OPAL_INTERNAL_ERROR -11
+#define OPAL_BUSY_EVENT -12
+#define OPAL_HARDWARE_FROZEN -13
+
+/* API Tokens (in r0) */
+#define OPAL_CONSOLE_WRITE 1
+#define OPAL_CONSOLE_READ 2
+#define OPAL_RTC_READ 3
+#define OPAL_RTC_WRITE 4
+#define OPAL_CEC_POWER_DOWN 5
+#define OPAL_CEC_REBOOT 6
+#define OPAL_READ_NVRAM 7
+#define OPAL_WRITE_NVRAM 8
+#define OPAL_HANDLE_INTERRUPT 9
+#define OPAL_POLL_EVENTS 10
+#define OPAL_PCI_SET_HUB_TCE_MEMORY 11
+#define OPAL_PCI_SET_PHB_TCE_MEMORY 12
+#define OPAL_PCI_CONFIG_READ_BYTE 13
+#define OPAL_PCI_CONFIG_READ_HALF_WORD 14
+#define OPAL_PCI_CONFIG_READ_WORD 15
+#define OPAL_PCI_CONFIG_WRITE_BYTE 16
+#define OPAL_PCI_CONFIG_WRITE_HALF_WORD 17
+#define OPAL_PCI_CONFIG_WRITE_WORD 18
+#define OPAL_SET_XIVE 19
+#define OPAL_GET_XIVE 20
+#define OPAL_GET_COMPLETION_TOKEN_STATUS 21 /* obsolete */
+#define OPAL_REGISTER_OPAL_EXCEPTION_HANDLER 22
+#define OPAL_PCI_EEH_FREEZE_STATUS 23
+#define OPAL_PCI_SHPC 24
+#define OPAL_CONSOLE_WRITE_BUFFER_SPACE 25
+#define OPAL_PCI_EEH_FREEZE_CLEAR 26
+#define OPAL_PCI_PHB_MMIO_ENABLE 27
+#define OPAL_PCI_SET_PHB_MEM_WINDOW 28
+#define OPAL_PCI_MAP_PE_MMIO_WINDOW 29
+#define OPAL_PCI_SET_PHB_TABLE_MEMORY 30
+#define OPAL_PCI_SET_PE 31
+#define OPAL_PCI_SET_PELTV 32
+#define OPAL_PCI_SET_MVE 33
+#define OPAL_PCI_SET_MVE_ENABLE 34
+#define OPAL_PCI_GET_XIVE_REISSUE 35
+#define OPAL_PCI_SET_XIVE_REISSUE 36
+#define OPAL_PCI_SET_XIVE_PE 37
+#define OPAL_GET_XIVE_SOURCE 38
+#define OPAL_GET_MSI_32 39
+#define OPAL_GET_MSI_64 40
+#define OPAL_START_CPU 41
+#define OPAL_QUERY_CPU_STATUS 42
+#define OPAL_WRITE_OPPANEL 43
+#define OPAL_PCI_MAP_PE_DMA_WINDOW 44
+#define OPAL_PCI_MAP_PE_DMA_WINDOW_REAL 45
+#define OPAL_PCI_RESET 49
+
+#ifndef __ASSEMBLY__
+
+/* Other enums */
+enum OpalVendorApiTokens {
+ OPAL_START_VENDOR_API_RANGE = 1000, OPAL_END_VENDOR_API_RANGE = 1999
+};
+enum OpalFreezeState {
+ OPAL_EEH_STOPPED_NOT_FROZEN = 0,
+ OPAL_EEH_STOPPED_MMIO_FREEZE = 1,
+ OPAL_EEH_STOPPED_DMA_FREEZE = 2,
+ OPAL_EEH_STOPPED_MMIO_DMA_FREEZE = 3,
+ OPAL_EEH_STOPPED_RESET = 4,
+ OPAL_EEH_STOPPED_TEMP_UNAVAIL = 5,
+ OPAL_EEH_STOPPED_PERM_UNAVAIL = 6
+};
+enum OpalEehFreezeActionToken {
+ OPAL_EEH_ACTION_CLEAR_FREEZE_MMIO = 1,
+ OPAL_EEH_ACTION_CLEAR_FREEZE_DMA = 2,
+ OPAL_EEH_ACTION_CLEAR_FREEZE_ALL = 3
+};
+enum OpalPciStatusToken {
+ OPAL_EEH_PHB_NO_ERROR = 0,
+ OPAL_EEH_PHB_FATAL = 1,
+ OPAL_EEH_PHB_RECOVERABLE = 2,
+ OPAL_EEH_PHB_BUS_ERROR = 3,
+ OPAL_EEH_PCI_NO_DEVSEL = 4,
+ OPAL_EEH_PCI_TA = 5,
+ OPAL_EEH_PCIEX_UR = 6,
+ OPAL_EEH_PCIEX_CA = 7,
+ OPAL_EEH_PCI_MMIO_ERROR = 8,
+ OPAL_EEH_PCI_DMA_ERROR = 9
+};
+enum OpalShpcAction {
+ OPAL_SHPC_GET_LINK_STATE = 0,
+ OPAL_SHPC_GET_SLOT_STATE = 1
+};
+enum OpalShpcLinkState {
+ OPAL_SHPC_LINK_DOWN = 0,
+ OPAL_SHPC_LINK_UP = 1
+};
+enum OpalMmioWindowType {
+ OPAL_M32_WINDOW_TYPE = 1,
+ OPAL_M64_WINDOW_TYPE = 2,
+ OPAL_IO_WINDOW_TYPE = 3
+};
+enum OpalShpcSlotState {
+ OPAL_SHPC_DEV_NOT_PRESENT = 0,
+ OPAL_SHPC_DEV_PRESENT = 1
+};
+enum OpalExceptionHandler {
+ OPAL_MACHINE_CHECK_HANDLER = 1,
+ OPAL_HYPERVISOR_MAINTENANCE_HANDLER = 2,
+ OPAL_SOFTPATCH_HANDLER = 3
+};
+enum OpalPendingState {
+ OPAL_EVENT_OPAL_INTERNAL = 0x1,
+ OPAL_EVENT_NVRAM = 0x2,
+ OPAL_EVENT_RTC = 0x4,
+ OPAL_EVENT_CONSOLE_OUTPUT = 0x8,
+ OPAL_EVENT_CONSOLE_INPUT = 0x10
+};
+
+/* Machine check related definitions */
+enum OpalMCE_Version {
+ OpalMCE_V1 = 1,
+};
+
+enum OpalMCE_Severity {
+ OpalMCE_SEV_NO_ERROR = 0,
+ OpalMCE_SEV_WARNING = 1,
+ OpalMCE_SEV_ERROR_SYNC = 2,
+ OpalMCE_SEV_FATAL = 3,
+};
+
+enum OpalMCE_Disposition {
+ OpalMCE_DISPOSITION_RECOVERED = 0,
+ OpalMCE_DISPOSITION_NOT_RECOVERED = 1,
+};
+
+enum OpalMCE_Initiator {
+ OpalMCE_INITIATOR_UNKNOWN = 0,
+ OpalMCE_INITIATOR_CPU = 1,
+};
+
+enum OpalMCE_ErrorType {
+ OpalMCE_ERROR_TYPE_UNKNOWN = 0,
+ OpalMCE_ERROR_TYPE_UE = 1,
+ OpalMCE_ERROR_TYPE_SLB = 2,
+ OpalMCE_ERROR_TYPE_ERAT = 3,
+ OpalMCE_ERROR_TYPE_TLB = 4,
+};
+
+enum OpalMCE_UeErrorType {
+ OpalMCE_UE_ERROR_INDETERMINATE = 0,
+ OpalMCE_UE_ERROR_IFETCH = 1,
+ OpalMCE_UE_ERROR_PAGE_TABLE_WALK_IFETCH = 2,
+ OpalMCE_UE_ERROR_LOAD_STORE = 3,
+ OpalMCE_UE_ERROR_PAGE_TABLE_WALK_LOAD_STORE = 4,
+};
+
+enum OpalMCE_SlbErrorType {
+ OpalMCE_SLB_ERROR_INDETERMINATE = 0,
+ OpalMCE_SLB_ERROR_PARITY = 1,
+ OpalMCE_SLB_ERROR_MULTIHIT = 2,
+};
+
+enum OpalMCE_EratErrorType {
+ OpalMCE_ERAT_ERROR_INDETERMINATE = 0,
+ OpalMCE_ERAT_ERROR_PARITY = 1,
+ OpalMCE_ERAT_ERROR_MULTIHIT = 2,
+};
+
+enum OpalMCE_TlbErrorType {
+ OpalMCE_TLB_ERROR_INDETERMINATE = 0,
+ OpalMCE_TLB_ERROR_PARITY = 1,
+ OpalMCE_TLB_ERROR_MULTIHIT = 2,
+};
+
+enum OpalThreadStatus {
+ OPAL_THREAD_INACTIVE = 0x0,
+ OPAL_THREAD_STARTED = 0x1
+};
+
+enum OpalPciBusCompare {
+ OpalPciBusAny = 0, /* Any bus number match */
+ OpalPciBus3Bits = 2, /* Match top 3 bits of bus number */
+ OpalPciBus4Bits = 3, /* Match top 4 bits of bus number */
+ OpalPciBus5Bits = 4, /* Match top 5 bits of bus number */
+ OpalPciBus6Bits = 5, /* Match top 6 bits of bus number */
+ OpalPciBus7Bits = 6, /* Match top 7 bits of bus number */
+ OpalPciBusAll = 7, /* Match bus number exactly */
+};
+
+enum OpalDeviceCompare {
+ OPAL_IGNORE_RID_DEVICE_NUMBER = 0,
+ OPAL_COMPARE_RID_DEVICE_NUMBER = 1
+};
+
+enum OpalFuncCompare {
+ OPAL_IGNORE_RID_FUNCTION_NUMBER = 0,
+ OPAL_COMPARE_RID_FUNCTION_NUMBER = 1
+};
+
+enum OpalPeAction {
+ OPAL_UNMAP_PE = 0,
+ OPAL_MAP_PE = 1
+};
+
+enum OpalPciResetAndReinitScope {
+ OPAL_PHB_COMPLETE = 1, OPAL_PCI_LINK = 2, OPAL_PHB_ERROR = 3,
+ OPAL_PCI_HOT_RESET = 4, OPAL_PCI_FUNDAMENTAL_RESET = 5,
+ OPAL_PCI_IODA_RESET = 6,
+};
+
+enum OpalPciResetState { OPAL_DEASSERT_RESET = 0, OPAL_ASSERT_RESET = 1 };
+
+struct opal_machine_check_event {
+ enum OpalMCE_Version version:8; /* 0x00 */
+ uint8_t in_use; /* 0x01 */
+ enum OpalMCE_Severity severity:8; /* 0x02 */
+ enum OpalMCE_Initiator initiator:8; /* 0x03 */
+ enum OpalMCE_ErrorType error_type:8; /* 0x04 */
+ enum OpalMCE_Disposition disposition:8; /* 0x05 */
+ uint8_t reserved_1[2]; /* 0x06 */
+ uint64_t gpr3; /* 0x08 */
+ uint64_t srr0; /* 0x10 */
+ uint64_t srr1; /* 0x18 */
+ union { /* 0x20 */
+ struct {
+ enum OpalMCE_UeErrorType ue_error_type:8;
+ uint8_t effective_address_provided;
+ uint8_t physical_address_provided;
+ uint8_t reserved_1[5];
+ uint64_t effective_address;
+ uint64_t physical_address;
+ uint8_t reserved_2[8];
+ } ue_error;
+
+ struct {
+ enum OpalMCE_SlbErrorType slb_error_type:8;
+ uint8_t effective_address_provided;
+ uint8_t reserved_1[6];
+ uint64_t effective_address;
+ uint8_t reserved_2[16];
+ } slb_error;
+
+ struct {
+ enum OpalMCE_EratErrorType erat_error_type:8;
+ uint8_t effective_address_provided;
+ uint8_t reserved_1[6];
+ uint64_t effective_address;
+ uint8_t reserved_2[16];
+ } erat_error;
+
+ struct {
+ enum OpalMCE_TlbErrorType tlb_error_type:8;
+ uint8_t effective_address_provided;
+ uint8_t reserved_1[6];
+ uint64_t effective_address;
+ uint8_t reserved_2[16];
+ } tlb_error;
+ } u;
+};
+
+typedef struct oppanel_line {
+ /* XXX */
+} oppanel_line_t;
+
+/* API functions */
+int64_t opal_console_write(int64_t term_number, int64_t *length,
+ const uint8_t *buffer);
+int64_t opal_console_read(int64_t term_number, int64_t *length,
+ uint8_t *buffer);
+int64_t opal_console_write_buffer_space(int64_t term_number,
+ int64_t *length);
+int64_t opal_rtc_read(uint32_t *year_month_day,
+ uint64_t *hour_minute_second_millisecond);
+int64_t opal_rtc_write(uint32_t year_month_day,
+ uint64_t hour_minute_second_millisecond);
+int64_t opal_cec_power_down(uint64_t request);
+int64_t opal_cec_reboot(void);
+int64_t opal_read_nvram(uint64_t buffer, uint64_t size, uint64_t offset);
+int64_t opal_write_nvram(uint64_t buffer, uint64_t size, uint64_t offset);
+int64_t opal_handle_interrupt(uint64_t isn, uint64_t *outstanding_event_mask);
+int64_t opal_poll_events(uint64_t *outstanding_event_mask);
+int64_t opal_pci_set_hub_tce_memory(uint64_t hub_id, uint64_t tce_mem_addr,
+ uint64_t tce_mem_size);
+int64_t opal_pci_set_phb_tce_memory(uint64_t phb_id, uint64_t tce_mem_addr,
+ uint64_t tce_mem_size);
+int64_t opal_pci_config_read_byte(uint64_t phb_id, uint64_t bus_dev_func,
+ uint64_t offset, uint8_t *data);
+int64_t opal_pci_config_read_half_word(uint64_t phb_id, uint64_t bus_dev_func,
+ uint64_t offset, uint16_t *data);
+int64_t opal_pci_config_read_word(uint64_t phb_id, uint64_t bus_dev_func,
+ uint64_t offset, uint32_t *data);
+int64_t opal_pci_config_write_byte(uint64_t phb_id, uint64_t bus_dev_func,
+ uint64_t offset, uint8_t data);
+int64_t opal_pci_config_write_half_word(uint64_t phb_id, uint64_t bus_dev_func,
+ uint64_t offset, uint16_t data);
+int64_t opal_pci_config_write_word(uint64_t phb_id, uint64_t bus_dev_func,
+ uint64_t offset, uint32_t data);
+int64_t opal_set_xive(uint32_t isn, uint16_t server, uint8_t priority);
+int64_t opal_get_xive(uint32_t isn, uint16_t *server, uint8_t *priority);
+int64_t opal_register_exception_handler(uint64_t opal_exception,
+ uint64_t handler_address,
+ uint64_t glue_cache_line);
+int64_t opal_pci_eeh_freeze_status(uint64_t phb_id, uint64_t pe_number,
+ uint8_t *freeze_state,
+ uint16_t *pci_error_type,
+ uint64_t *phb_status);
+int64_t opal_pci_eeh_freeze_clear(uint64_t phb_id, uint64_t pe_number,
+ uint64_t eeh_action_token);
+int64_t opal_pci_shpc(uint64_t phb_id, uint64_t shpc_action, uint8_t *state);
+
+
+
+int64_t opal_pci_phb_mmio_enable(uint64_t phb_id, uint16_t window_type,
+ uint16_t window_num, uint16_t enable);
+int64_t opal_pci_set_phb_mem_window(uint64_t phb_id, uint16_t window_type,
+ uint16_t window_num,
+ uint64_t starting_real_address,
+ uint64_t starting_pci_address,
+ uint16_t segment_size);
+int64_t opal_pci_map_pe_mmio_window(uint64_t phb_id, uint16_t pe_number,
+ uint16_t window_type, uint16_t window_num,
+ uint16_t segment_num);
+int64_t opal_pci_set_phb_table_memory(uint64_t phb_id, uint64_t rtt_addr,
+ uint64_t ivt_addr, uint64_t ivt_len,
+ uint64_t reject_array_addr,
+ uint64_t peltv_addr);
+int64_t opal_pci_set_pe(uint64_t phb_id, uint64_t pe_number, uint64_t bus_dev_func,
+ uint8_t bus_compare, uint8_t dev_compare, uint8_t func_compare,
+ uint8_t pe_action);
+int64_t opal_pci_set_peltv(uint64_t phb_id, uint32_t parent_pe, uint32_t child_pe,
+ uint8_t state);
+int64_t opal_pci_set_mve(uint64_t phb_id, uint32_t mve_number, uint32_t pe_number);
+int64_t opal_pci_set_mve_enable(uint64_t phb_id, uint32_t mve_number,
+ uint32_t state);
+int64_t opal_pci_get_xive_reissue(uint64_t phb_id, uint32_t xive_number,
+ uint8_t *p_bit, uint8_t *q_bit);
+int64_t opal_pci_set_xive_reissue(uint64_t phb_id, uint32_t xive_number,
+ uint8_t p_bit, uint8_t q_bit);
+int64_t opal_pci_set_xive_pe(uint64_t phb_id, uint32_t pe_number,
+ uint32_t xive_num);
+int64_t opal_get_xive_source(uint64_t phb_id, uint32_t xive_num,
+ int32_t *interrupt_source_number);
+int64_t opal_get_msi_32(uint64_t phb_id, uint32_t mve_number, uint32_t xive_num,
+ uint8_t msi_range, uint32_t *msi_address,
+ uint32_t *message_data);
+int64_t opal_get_msi_64(uint64_t phb_id, uint32_t mve_number,
+ uint32_t xive_num, uint8_t msi_range,
+ uint64_t *msi_address, uint32_t *message_data);
+int64_t opal_start_cpu(uint64_t thread_number, uint64_t start_address);
+int64_t opal_query_cpu_status(uint64_t thread_number, uint8_t *thread_status);
+int64_t opal_write_oppanel(oppanel_line_t *lines, uint64_t num_lines);
+int64_t opal_pci_map_pe_dma_window(uint64_t phb_id, uint16_t pe_number, uint16_t window_id,
+ uint16_t tce_levels, uint64_t tce_table_addr,
+ uint64_t tce_table_size, uint64_t tce_page_size);
+int64_t opal_pci_map_pe_dma_window_real(uint64_t phb_id, uint16_t pe_number,
+ uint16_t dma_window_number, uint64_t pci_start_addr,
+ uint64_t pci_mem_size);
+int64_t opal_pci_reset(uint64_t phb_id, uint8_t reset_scope, uint8_t assert_state);
+
+/* Internal functions */
+extern int early_init_dt_scan_opal(unsigned long node, const char *uname, int depth, void *data);
+
+extern int opal_get_chars(uint32_t vtermno, char *buf, int count);
+extern int opal_put_chars(uint32_t vtermno, const char *buf, int total_len);
+
+extern void hvc_opal_init_early(void);
+
+/* Internal functions */
+extern int early_init_dt_scan_opal(unsigned long node, const char *uname,
+ int depth, void *data);
+
+extern int opal_get_chars(uint32_t vtermno, char *buf, int count);
+extern int opal_put_chars(uint32_t vtermno, const char *buf, int total_len);
+
+extern void hvc_opal_init_early(void);
+
+struct rtc_time;
+extern int opal_set_rtc_time(struct rtc_time *tm);
+extern void opal_get_rtc_time(struct rtc_time *tm);
+extern unsigned long opal_get_boot_time(void);
+extern void opal_nvram_init(void);
+
+extern int opal_machine_check(struct pt_regs *regs);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __OPAL_H */
#define get_slb_shadow() (get_paca()->slb_shadow_ptr)
struct task_struct;
+struct opal_machine_check_event;
/*
* Defines the layout of the paca.
u8 io_sync; /* writel() needs spin_unlock sync */
u8 irq_work_pending; /* IRQ_WORK interrupt while soft-disable */
+#ifdef CONFIG_PPC_POWERNV
+ /* Pointer to OPAL machine check event structure set by the
+ * early exception handler for use by high level C handler
+ */
+ struct opal_machine_check_event *opal_mc_evt;
+#endif
+
/* Stuff for accurate time accounting */
u64 user_time; /* accumulated usermode TB ticks */
u64 system_time; /* accumulated system TB ticks */
#define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT)
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_HUGETLB_PAGE
+extern unsigned int HPAGE_SHIFT;
+#else
+#define HPAGE_SHIFT PAGE_SHIFT
+#endif
+#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT)
+#define HPAGE_MASK (~(HPAGE_SIZE - 1))
+#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT)
+#define HUGE_MAX_HSTATE (MMU_PAGE_COUNT-1)
+#endif
+
/* We do define AT_SYSINFO_EHDR but don't use the gate mechanism */
#define __HAVE_ARCH_GATE_AREA 1
#define is_kernel_addr(x) ((x) >= PAGE_OFFSET)
#endif
+/*
+ * Use the top bit of the higher-level page table entries to indicate whether
+ * the entries we point to contain hugepages. This works because we know that
+ * the page tables live in kernel space. If we ever decide to support having
+ * page tables at arbitrary addresses, this breaks and will have to change.
+ */
+#ifdef CONFIG_PPC64
+#define PD_HUGE 0x8000000000000000
+#else
+#define PD_HUGE 0x80000000
+#endif
+
+/*
+ * Some number of bits at the level of the page table that points to
+ * a hugepte are used to encode the size. This masks those bits.
+ */
+#define HUGEPD_SHIFT_MASK 0x3f
+
#ifndef __ASSEMBLY__
#undef STRICT_MM_TYPECHECKS
#endif
typedef struct { signed long pd; } hugepd_t;
-#define HUGEPD_SHIFT_MASK 0x3f
#ifdef CONFIG_HUGETLB_PAGE
static inline int hugepd_ok(hugepd_t hpd)
/* Log 2 of page table size */
extern u64 ppc64_pft_size;
-/* Large pages size */
-#ifdef CONFIG_HUGETLB_PAGE
-extern unsigned int HPAGE_SHIFT;
-#else
-#define HPAGE_SHIFT PAGE_SHIFT
-#endif
-#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT)
-#define HPAGE_MASK (~(HPAGE_SIZE - 1))
-#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT)
-#define HUGE_MAX_HSTATE (MMU_PAGE_COUNT-1)
-
#endif /* __ASSEMBLY__ */
#ifdef CONFIG_PPC_MM_SLICES
#define PTE_RPN_SHIFT (24)
#endif
+#define PTE_WIMGE_SHIFT (19)
+#define PTE_BAP_SHIFT (2)
+
/* On 32-bit, we never clear the top part of the PTE */
#ifdef CONFIG_PPC32
#define _PTE_NONE_MASK 0xffffffff00000000ULL
#define MSR_ MSR_ME | MSR_CE
#define MSR_KERNEL MSR_ | MSR_64BIT
-#define MSR_USER32 MSR_ | MSR_PR | MSR_EE | MSR_DE
+#define MSR_USER32 MSR_ | MSR_PR | MSR_EE
#define MSR_USER64 MSR_USER32 | MSR_64BIT
#elif defined (CONFIG_40x)
#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE)
#define L1CSR1_ICFI 0x00000002 /* Instr Cache Flash Invalidate */
#define L1CSR1_ICE 0x00000001 /* Instr Cache Enable */
+/* Bit definitions for L1CSR2. */
+#define L1CSR2_DCWS 0x40000000 /* Data Cache write shadow */
+
/* Bit definitions for L2CSR0. */
#define L2CSR0_L2E 0x80000000 /* L2 Cache Enable */
#define L2CSR0_L2PE 0x40000000 /* L2 Cache Parity/ECC Enable */
#define ERR_FLAG_ALREADY_LOGGED 0x0
#define ERR_FLAG_BOOT 0x1 /* log was pulled from NVRAM on boot */
#define ERR_TYPE_RTAS_LOG 0x2 /* from rtas event-scan */
-#define ERR_TYPE_KERNEL_PANIC 0x4 /* from panic() */
+#define ERR_TYPE_KERNEL_PANIC 0x4 /* from die()/panic() */
+#define ERR_TYPE_KERNEL_PANIC_GZ 0x8 /* ditto, compressed */
/* All the types and not flags */
-#define ERR_TYPE_MASK (ERR_TYPE_RTAS_LOG | ERR_TYPE_KERNEL_PANIC)
+#define ERR_TYPE_MASK \
+ (ERR_TYPE_RTAS_LOG | ERR_TYPE_KERNEL_PANIC | ERR_TYPE_KERNEL_PANIC_GZ)
#define RTAS_DEBUG KERN_DEBUG "RTAS: "
#ifdef __powerpc64__
-extern char _end[];
+extern char __end_interrupts[];
static inline int in_kernel_text(unsigned long addr)
{
void generic_cpu_die(unsigned int cpu);
void generic_mach_cpu_die(void);
void generic_set_cpu_dead(unsigned int cpu);
+int generic_check_cpu_restart(unsigned int cpu);
#endif
#ifdef CONFIG_PPC64
#endif /* CONFIG_SPARSEMEM */
#ifdef CONFIG_MEMORY_HOTPLUG
-extern void create_section_mapping(unsigned long start, unsigned long end);
+extern int create_section_mapping(unsigned long start, unsigned long end);
extern int remove_section_mapping(unsigned long start, unsigned long end);
#ifdef CONFIG_NUMA
extern int hot_add_scn_to_nid(unsigned long scn_addr);
#include <linux/workqueue.h>
#include <linux/sysdev.h>
+#include <linux/mutex.h>
#define LS_SIZE (256 * 1024)
#define LS_ADDR_MASK (LS_SIZE - 1)
extern unsigned int __start___lwsync_fixup, __stop___lwsync_fixup;
extern void do_lwsync_fixups(unsigned long value, void *fixup_start,
void *fixup_end);
+extern void do_final_fixups(void);
static inline void eieio(void)
{
START_LWSYNC_SECTION(97); \
isync; \
MAKE_LWSYNC_SECTION_ENTRY(97, __lwsync_fixup);
-#define PPC_ACQUIRE_BARRIER "\n" stringify_in_c(__PPC_ACQUIRE_BARRIER)
-#define PPC_RELEASE_BARRIER stringify_in_c(LWSYNC) "\n"
+#define PPC_ACQUIRE_BARRIER "\n" stringify_in_c(__PPC_ACQUIRE_BARRIER)
+#define PPC_RELEASE_BARRIER stringify_in_c(LWSYNC) "\n"
+#define PPC_ATOMIC_ENTRY_BARRIER "\n" stringify_in_c(LWSYNC) "\n"
+#define PPC_ATOMIC_EXIT_BARRIER "\n" stringify_in_c(sync) "\n"
#else
#define PPC_ACQUIRE_BARRIER
#define PPC_RELEASE_BARRIER
+#define PPC_ATOMIC_ENTRY_BARRIER
+#define PPC_ATOMIC_EXIT_BARRIER
#endif
#endif /* __KERNEL__ */
#define RECLAIM_DISTANCE 10
/*
- * Before going off node we want the VM to try and reclaim from the local
- * node. It does this if the remote distance is larger than RECLAIM_DISTANCE.
- * With the default REMOTE_DISTANCE of 20 and the default RECLAIM_DISTANCE of
- * 20, we never reclaim and go off node straight away.
- *
- * To fix this we choose a smaller value of RECLAIM_DISTANCE.
+ * Avoid creating an extra level of balancing (SD_ALLNODES) on the largest
+ * POWER7 boxes which have a maximum of 32 nodes.
*/
-#define RECLAIM_DISTANCE 10
+#define SD_NODES_PER_DOMAIN 32
#include <asm/mmzone.h>
.forkexec_idx = 0, \
\
.flags = 1*SD_LOAD_BALANCE \
- | 1*SD_BALANCE_NEWIDLE \
+ | 0*SD_BALANCE_NEWIDLE \
| 1*SD_BALANCE_EXEC \
| 1*SD_BALANCE_FORK \
| 0*SD_BALANCE_WAKE \
- | 0*SD_WAKE_AFFINE \
+ | 1*SD_WAKE_AFFINE \
| 0*SD_PREFER_LOCAL \
| 0*SD_SHARE_CPUPOWER \
| 0*SD_POWERSAVINGS_BALANCE \
extern void __init udbg_init_usbgecko(void);
extern void __init udbg_init_wsp(void);
extern void __init udbg_init_ehv_bc(void);
+extern void __init udbg_init_ps3gelic(void);
+extern void __init udbg_init_debug_opal_raw(void);
+extern void __init udbg_init_debug_opal_hvsi(void);
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_UDBG_H */
#define DEFAULT_PRIORITY 5
/*
- * Mark IPIs as higher priority so we can take them inside interrupts that
- * arent marked IRQF_DISABLED
+ * Mark IPIs as higher priority so we can take them inside interrupts
+ * FIXME: still true now?
*/
#define IPI_PRIORITY 4
#define MAX_NUM_PRIORITIES 3
/* Native ICP */
+#ifdef CONFIG_PPC_ICP_NATIVE
extern int icp_native_init(void);
+#else
+static inline int icp_native_init(void) { return -ENODEV; }
+#endif
/* PAPR ICP */
+#ifdef CONFIG_PPC_ICP_HV
extern int icp_hv_init(void);
+#else
+static inline int icp_hv_init(void) { return -ENODEV; }
+#endif
/* ICP ops */
struct icp_ops {
extern int ics_native_init(void);
/* RTAS ICS */
+#ifdef CONFIG_PPC_ICS_RTAS
extern int ics_rtas_init(void);
+#else
+static inline int ics_rtas_init(void) { return -ENODEV; }
+#endif
+
+/* HAL ICS */
+#ifdef CONFIG_PPC_POWERNV
+extern int ics_opal_init(void);
+#else
+static inline int ics_opal_init(void) { return -ENODEV; }
+#endif
/* ICS instance, hooked up to chip_data of an irq */
struct ics {
#ifdef CONFIG_PPC_ISERIES
#include <asm/iseries/alpaca.h>
#endif
+#ifdef CONFIG_PPC_POWERNV
+#include <asm/opal.h>
+#endif
#if defined(CONFIG_KVM) || defined(CONFIG_KVM_GUEST)
#include <linux/kvm_host.h>
#endif
arch.timing_last_enter.tv32.tbl));
#endif
+#ifdef CONFIG_PPC_POWERNV
+ DEFINE(OPAL_MC_GPR3, offsetof(struct opal_machine_check_event, gpr3));
+ DEFINE(OPAL_MC_SRR0, offsetof(struct opal_machine_check_event, srr0));
+ DEFINE(OPAL_MC_SRR1, offsetof(struct opal_machine_check_event, srr1));
+ DEFINE(PACA_OPAL_MC_EVT, offsetof(struct paca_struct, opal_mc_evt));
+#endif
+
return 0;
}
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/memblock.h>
#include <asm/sections.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/errno.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <asm/clk_interface.h>
struct clk_interface clk_functions;
#include <linux/sched.h>
#include <linux/threads.h>
#include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <asm/oprofile_impl.h>
#include <asm/cputable.h>
#include <linux/reboot.h>
#include <linux/kexec.h>
#include <linux/bootmem.h>
+#include <linux/export.h>
#include <linux/crash_dump.h>
#include <linux/delay.h>
#include <linux/elf.h>
* busses using the iommu infrastructure
*/
+#include <linux/export.h>
#include <asm/iommu.h>
/*
return 1;
}
+static u64 dma_iommu_get_required_mask(struct device *dev)
+{
+ struct iommu_table *tbl = get_iommu_table_base(dev);
+ u64 mask;
+ if (!tbl)
+ return 0;
+
+ mask = 1ULL < (fls_long(tbl->it_offset + tbl->it_size) - 1);
+ mask += mask - 1;
+
+ return mask;
+}
+
struct dma_map_ops dma_iommu_ops = {
- .alloc_coherent = dma_iommu_alloc_coherent,
- .free_coherent = dma_iommu_free_coherent,
- .map_sg = dma_iommu_map_sg,
- .unmap_sg = dma_iommu_unmap_sg,
- .dma_supported = dma_iommu_dma_supported,
- .map_page = dma_iommu_map_page,
- .unmap_page = dma_iommu_unmap_page,
+ .alloc_coherent = dma_iommu_alloc_coherent,
+ .free_coherent = dma_iommu_free_coherent,
+ .map_sg = dma_iommu_map_sg,
+ .unmap_sg = dma_iommu_unmap_sg,
+ .dma_supported = dma_iommu_dma_supported,
+ .map_page = dma_iommu_map_page,
+ .unmap_page = dma_iommu_unmap_page,
+ .get_required_mask = dma_iommu_get_required_mask,
};
EXPORT_SYMBOL(dma_iommu_ops);
unsigned int ppc_swiotlb_enable;
+static u64 swiotlb_powerpc_get_required(struct device *dev)
+{
+ u64 end, mask, max_direct_dma_addr = dev->archdata.max_direct_dma_addr;
+
+ end = memblock_end_of_DRAM();
+ if (max_direct_dma_addr && end > max_direct_dma_addr)
+ end = max_direct_dma_addr;
+ end += get_dma_offset(dev);
+
+ mask = 1ULL << (fls64(end) - 1);
+ mask += mask - 1;
+
+ return mask;
+}
+
/*
* At the moment, all platforms that use this code only require
* swiotlb to be used if we're operating on HIGHMEM. Since
.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
.sync_sg_for_device = swiotlb_sync_sg_for_device,
.mapping_error = swiotlb_dma_mapping_error,
+ .get_required_mask = swiotlb_powerpc_get_required,
};
void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev)
#include <linux/dma-debug.h>
#include <linux/gfp.h>
#include <linux/memblock.h>
+#include <linux/export.h>
#include <asm/bug.h>
#include <asm/abs_addr.h>
#include <asm/machdep.h>
#endif
}
+static u64 dma_direct_get_required_mask(struct device *dev)
+{
+ u64 end, mask;
+
+ end = memblock_end_of_DRAM() + get_dma_offset(dev);
+
+ mask = 1ULL << (fls64(end) - 1);
+ mask += mask - 1;
+
+ return mask;
+}
+
static inline dma_addr_t dma_direct_map_page(struct device *dev,
struct page *page,
unsigned long offset,
#endif
struct dma_map_ops dma_direct_ops = {
- .alloc_coherent = dma_direct_alloc_coherent,
- .free_coherent = dma_direct_free_coherent,
- .map_sg = dma_direct_map_sg,
- .unmap_sg = dma_direct_unmap_sg,
- .dma_supported = dma_direct_dma_supported,
- .map_page = dma_direct_map_page,
- .unmap_page = dma_direct_unmap_page,
+ .alloc_coherent = dma_direct_alloc_coherent,
+ .free_coherent = dma_direct_free_coherent,
+ .map_sg = dma_direct_map_sg,
+ .unmap_sg = dma_direct_unmap_sg,
+ .dma_supported = dma_direct_dma_supported,
+ .map_page = dma_direct_map_page,
+ .unmap_page = dma_direct_unmap_page,
+ .get_required_mask = dma_direct_get_required_mask,
#ifdef CONFIG_NOT_COHERENT_CACHE
.sync_single_for_cpu = dma_direct_sync_single,
.sync_single_for_device = dma_direct_sync_single,
}
EXPORT_SYMBOL(dma_set_mask);
+u64 dma_get_required_mask(struct device *dev)
+{
+ struct dma_map_ops *dma_ops = get_dma_ops(dev);
+
+ if (ppc_md.dma_get_required_mask)
+ return ppc_md.dma_get_required_mask(dev);
+
+ if (unlikely(dma_ops == NULL))
+ return 0;
+
+ if (dma_ops->get_required_mask)
+ return dma_ops->get_required_mask(dev);
+
+ return DMA_BIT_MASK(8 * sizeof(dma_addr_t));
+}
+EXPORT_SYMBOL_GPL(dma_get_required_mask);
+
static int __init dma_init(void)
{
dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
stw r9,8(r1)
stw r11,12(r1)
stw r3,ORIG_GPR3(r1)
+ /*
+ * The trace_hardirqs_off will use CALLER_ADDR0 and CALLER_ADDR1.
+ * If from user mode there is only one stack frame on the stack, and
+ * accessing CALLER_ADDR1 will cause oops. So we need create a dummy
+ * stack frame to make trace_hardirqs_off happy.
+ */
+ andi. r12,r12,MSR_PR
+ beq 11f
+ stwu r1,-16(r1)
+ bl trace_hardirqs_off
+ addi r1,r1,16
+ b 12f
+
+11:
bl trace_hardirqs_off
+12:
lwz r0,GPR0(r1)
lwz r3,ORIG_GPR3(r1)
lwz r4,GPR4(r1)
#ifdef CONFIG_CBE_RAS
STD_EXCEPTION_HV(0x1200, 0x1202, cbe_system_error)
- KVM_HANDLER_PR_SKIP(PACA_EXGEN, EXC_HV, 0x1202)
+ KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1202)
#endif /* CONFIG_CBE_RAS */
STD_EXCEPTION_PSERIES(0x1300, 0x1300, instruction_breakpoint)
#ifdef CONFIG_CBE_RAS
STD_EXCEPTION_HV(0x1600, 0x1602, cbe_maintenance)
- KVM_HANDLER_PR_SKIP(PACA_EXGEN, EXC_HV, 0x1602)
+ KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1602)
#endif /* CONFIG_CBE_RAS */
STD_EXCEPTION_PSERIES(0x1700, 0x1700, altivec_assist)
#ifdef CONFIG_CBE_RAS
STD_EXCEPTION_HV(0x1800, 0x1802, cbe_thermal)
- KVM_HANDLER_PR_SKIP(PACA_EXGEN, EXC_HV, 0x1802)
+ KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1802)
#endif /* CONFIG_CBE_RAS */
. = 0x3000
rfid
b . /* prevent speculative execution */
-#ifdef CONFIG_PPC_PSERIES
+#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
/*
* Data area reserved for FWNMI option.
* This address (0x7000) is fixed by the RPA.
.= 0x7000
.globl fwnmi_data_area
fwnmi_data_area:
-#endif /* CONFIG_PPC_PSERIES */
+#endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */
/* iSeries does not use the FWNMI stuff, so it is safe to put
* this here, even if we later allow kernels that will boot on
#endif /* CONFIG_PPC_ISERIES */
-#ifdef CONFIG_PPC_PSERIES
+#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
+ /* pseries and powernv need to keep the whole page from
+ * 0x7000 to 0x8000 free for use by the firmware
+ */
. = 0x8000
-#endif /* CONFIG_PPC_PSERIES */
+#endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */
/*
* Space for CPU0's segment table.
.globl initial_stab
initial_stab:
.space 4096
+#ifdef CONFIG_PPC_POWERNV
+_GLOBAL(opal_mc_secondary_handler)
+ HMT_MEDIUM
+ SET_SCRATCH0(r13)
+ GET_PACA(r13)
+ clrldi r3,r3,2
+ tovirt(r3,r3)
+ std r3,PACA_OPAL_MC_EVT(r13)
+ ld r13,OPAL_MC_SRR0(r3)
+ mtspr SPRN_SRR0,r13
+ ld r13,OPAL_MC_SRR1(r3)
+ mtspr SPRN_SRR1,r13
+ ld r3,OPAL_MC_GPR3(r3)
+ GET_SCRATCH0(r13)
+ b machine_check_pSeries
+#endif /* CONFIG_PPC_POWERNV */
* 2 of the License, or (at your option) any later version.
*/
-#include <linux/module.h>
+#include <linux/export.h>
+#include <linux/cache.h>
#include <asm/firmware.h>
trap
#endif /* CONFIG_PPC_PMAC */
-1: mr r31,r3 /* save parameters */
- mr r30,r4
+1: mr r31,r3 /* save device tree ptr */
li r24,0 /* cpu # */
/*
* Do early platform-specific initialization,
* and set up the MMU.
*/
- mr r3,r31
- mr r4,r30
+ li r3,0
+ mr r4,r31
bl machine_init
bl __save_cpu_setup
bl MMU_init
_ENTRY(_stext);
_ENTRY(_start);
- /* Save parameters we are passed.
- */
- mr r31,r3
- mr r30,r4
- mr r29,r5
- mr r28,r6
- mr r27,r7
+ mr r31,r3 /* save device tree ptr */
/* We have to turn on the MMU right away so we get cache modes
* set correctly.
/*
* Decide what sort of machine this is and initialize the MMU.
*/
- mr r3,r31
- mr r4,r30
- mr r5,r29
- mr r6,r28
- mr r7,r27
+ li r3,0
+ mr r4,r31
bl machine_init
bl MMU_init
* of abatron_pteptrs
*/
nop
-/*
- * Save parameters we are passed
- */
- mr r31,r3
- mr r30,r4
- mr r29,r5
- mr r28,r6
- mr r27,r7
+ mr r31,r3 /* save device tree ptr */
li r24,0 /* CPU number */
bl init_cpu_state
/*
* Decide what sort of machine this is and initialize the MMU.
*/
- mr r3,r31
- mr r4,r30
- mr r5,r29
- mr r6,r28
- mr r7,r27
+ li r3,0
+ mr r4,r31
bl machine_init
bl MMU_init
* For pSeries or server processors:
* 1. The MMU is off & open firmware is running in real mode.
* 2. The kernel is entered at __start
+ * -or- For OPAL entry:
+ * 1. The MMU is off, processor in HV mode, primary CPU enters at 0
+ * with device-tree in gpr3. We also get OPAL base in r8 and
+ * entry in r9 for debugging purposes
+ * 2. Secondary processors enter at 0x60 with PIR in gpr3
*
* For iSeries:
* 1. The MMU is on (as it always is for iSeries)
/* Save parameters */
mr r31,r3
mr r30,r4
+#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL
+ /* Save OPAL entry */
+ mr r28,r8
+ mr r29,r9
+#endif
#ifdef CONFIG_PPC_BOOK3E
bl .start_initialization_book3e
_GLOBAL(relative_toc)
mflr r0
bcl 20,31,$+4
-0: mflr r9
- ld r2,(p_toc - 0b)(r9)
- add r2,r2,r9
+0: mflr r11
+ ld r2,(p_toc - 0b)(r11)
+ add r2,r2,r11
mtlr r0
blr
bdnz 3b
4:
+#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL
+ /* Setup OPAL entry */
+ std r28,0(r11);
+ std r29,8(r11);
+#endif
+
#ifndef CONFIG_PPC_BOOK3E
mfmsr r6
ori r6,r6,MSR_RI
*/
.globl __start
__start:
- mr r31,r3 /* save parameters */
- mr r30,r4
- mr r29,r5
- mr r28,r6
- mr r27,r7
+ mr r31,r3 /* save device tree ptr */
/* We have to turn on the MMU right away so we get cache modes
* set correctly.
/*
* Decide what sort of machine this is and initialize the MMU.
*/
- mr r3,r31
- mr r4,r30
- mr r5,r29
- mr r6,r28
- mr r7,r27
+ li r3,0
+ mr r4,r31
bl machine_init
bl MMU_init
* of abatron_pteptrs
*/
nop
-/*
- * Save parameters we are passed
- */
- mr r31,r3
- mr r30,r4
- mr r29,r5
- mr r28,r6
- mr r27,r7
- li r25,0 /* phys kernel start (low) */
- li r24,0 /* CPU number */
- li r23,0 /* phys kernel start (high) */
+
+ /* Translate device tree address to physical, save in r30/r31 */
+ mfmsr r16
+ mfspr r17,SPRN_PID
+ rlwinm r17,r17,16,0x3fff0000 /* turn PID into MAS6[SPID] */
+ rlwimi r17,r16,28,0x00000001 /* turn MSR[DS] into MAS6[SAS] */
+ mtspr SPRN_MAS6,r17
+
+ tlbsx 0,r3 /* must succeed */
+
+ mfspr r16,SPRN_MAS1
+ mfspr r20,SPRN_MAS3
+ rlwinm r17,r16,25,0x1f /* r17 = log2(page size) */
+ li r18,1024
+ slw r18,r18,r17 /* r18 = page size */
+ addi r18,r18,-1
+ and r19,r3,r18 /* r19 = page offset */
+ andc r31,r20,r18 /* r31 = page base */
+ or r31,r31,r19 /* r31 = devtree phys addr */
+ mfspr r30,SPRN_MAS7
+
+ li r25,0 /* phys kernel start (low) */
+ li r24,0 /* CPU number */
+ li r23,0 /* phys kernel start (high) */
/* We try to not make any assumptions about how the boot loader
* setup or used the TLBs. We invalidate all mappings from the
/*
* Decide what sort of machine this is and initialize the MMU.
*/
- mr r3,r31
- mr r4,r30
- mr r5,r29
- mr r6,r28
- mr r7,r27
+ mr r3,r30
+ mr r4,r31
bl machine_init
bl MMU_init
* if we find the pte (fall through):
* r11 is low pte word
* r12 is pointer to the pte
+ * r10 is the pshift from the PGD, if we're a hugepage
*/
#ifdef CONFIG_PTE_64BIT
+#ifdef CONFIG_HUGETLB_PAGE
+#define FIND_PTE \
+ rlwinm r12, r10, 13, 19, 29; /* Compute pgdir/pmd offset */ \
+ lwzx r11, r12, r11; /* Get pgd/pmd entry */ \
+ rlwinm. r12, r11, 0, 0, 20; /* Extract pt base address */ \
+ blt 1000f; /* Normal non-huge page */ \
+ beq 2f; /* Bail if no table */ \
+ oris r11, r11, PD_HUGE@h; /* Put back address bit */ \
+ andi. r10, r11, HUGEPD_SHIFT_MASK@l; /* extract size field */ \
+ xor r12, r10, r11; /* drop size bits from pointer */ \
+ b 1001f; \
+1000: rlwimi r12, r10, 23, 20, 28; /* Compute pte address */ \
+ li r10, 0; /* clear r10 */ \
+1001: lwz r11, 4(r12); /* Get pte entry */
+#else
#define FIND_PTE \
rlwinm r12, r10, 13, 19, 29; /* Compute pgdir/pmd offset */ \
lwzx r11, r12, r11; /* Get pgd/pmd entry */ \
beq 2f; /* Bail if no table */ \
rlwimi r12, r10, 23, 20, 28; /* Compute pte address */ \
lwz r11, 4(r12); /* Get pte entry */
-#else
+#endif /* HUGEPAGE */
+#else /* !PTE_64BIT */
#define FIND_PTE \
rlwimi r11, r10, 12, 20, 29; /* Create L1 (pgdir/pmd) address */ \
lwz r11, 0(r11); /* Get L1 entry */ \
#ifdef CONFIG_PTE_64BIT
#ifdef CONFIG_SMP
- subf r10,r11,r12 /* create false data dep */
- lwzx r13,r11,r10 /* Get upper pte bits */
+ subf r13,r11,r12 /* create false data dep */
+ lwzx r13,r11,r13 /* Get upper pte bits */
#else
lwz r13,0(r12) /* Get upper pte bits */
#endif
#ifdef CONFIG_PTE_64BIT
#ifdef CONFIG_SMP
- subf r10,r11,r12 /* create false data dep */
- lwzx r13,r11,r10 /* Get upper pte bits */
+ subf r13,r11,r12 /* create false data dep */
+ lwzx r13,r11,r13 /* Get upper pte bits */
#else
lwz r13,0(r12) /* Get upper pte bits */
#endif
/*
* Both the instruction and data TLB miss get to this
* point to load the TLB.
- * r10 - available to use
+ * r10 - tsize encoding (if HUGETLB_PAGE) or available to use
* r11 - TLB (info from Linux PTE)
* r12 - available to use
* r13 - upper bits of PTE (if PTE_64BIT) or available to use
* Upon exit, we reload everything and RFI.
*/
finish_tlb_load:
+#ifdef CONFIG_HUGETLB_PAGE
+ cmpwi 6, r10, 0 /* check for huge page */
+ beq 6, finish_tlb_load_cont /* !huge */
+
+ /* Alas, we need more scratch registers for hugepages */
+ mfspr r12, SPRN_SPRG_THREAD
+ stw r14, THREAD_NORMSAVE(4)(r12)
+ stw r15, THREAD_NORMSAVE(5)(r12)
+ stw r16, THREAD_NORMSAVE(6)(r12)
+ stw r17, THREAD_NORMSAVE(7)(r12)
+
+ /* Get the next_tlbcam_idx percpu var */
+#ifdef CONFIG_SMP
+ lwz r12, THREAD_INFO-THREAD(r12)
+ lwz r15, TI_CPU(r12)
+ lis r14, __per_cpu_offset@h
+ ori r14, r14, __per_cpu_offset@l
+ rlwinm r15, r15, 2, 0, 29
+ lwzx r16, r14, r15
+#else
+ li r16, 0
+#endif
+ lis r17, next_tlbcam_idx@h
+ ori r17, r17, next_tlbcam_idx@l
+ add r17, r17, r16 /* r17 = *next_tlbcam_idx */
+ lwz r15, 0(r17) /* r15 = next_tlbcam_idx */
+
+ lis r14, MAS0_TLBSEL(1)@h /* select TLB1 (TLBCAM) */
+ rlwimi r14, r15, 16, 4, 15 /* next_tlbcam_idx entry */
+ mtspr SPRN_MAS0, r14
+
+ /* Extract TLB1CFG(NENTRY) */
+ mfspr r16, SPRN_TLB1CFG
+ andi. r16, r16, 0xfff
+
+ /* Update next_tlbcam_idx, wrapping when necessary */
+ addi r15, r15, 1
+ cmpw r15, r16
+ blt 100f
+ lis r14, tlbcam_index@h
+ ori r14, r14, tlbcam_index@l
+ lwz r15, 0(r14)
+100: stw r15, 0(r17)
+
+ /*
+ * Calc MAS1_TSIZE from r10 (which has pshift encoded)
+ * tlb_enc = (pshift - 10).
+ */
+ subi r15, r10, 10
+ mfspr r16, SPRN_MAS1
+ rlwimi r16, r15, 7, 20, 24
+ mtspr SPRN_MAS1, r16
+
+ /* copy the pshift for use later */
+ mr r14, r10
+
+ /* fall through */
+
+#endif /* CONFIG_HUGETLB_PAGE */
+
/*
* We set execute, because we don't have the granularity to
* properly set this at the page level (Linux problem).
* Many of these bits are software only. Bits we don't set
* here we (properly should) assume have the appropriate value.
*/
-
- mfspr r12, SPRN_MAS2
-#ifdef CONFIG_PTE_64BIT
- rlwimi r12, r11, 32-19, 27, 31 /* extract WIMGE from pte */
-#else
- rlwimi r12, r11, 26, 27, 31 /* extract WIMGE from pte */
-#endif
- mtspr SPRN_MAS2, r12
-
+finish_tlb_load_cont:
#ifdef CONFIG_PTE_64BIT
rlwinm r12, r11, 32-2, 26, 31 /* Move in perm bits */
andi. r10, r11, _PAGE_DIRTY
andc r12, r12, r10
1: rlwimi r12, r13, 20, 0, 11 /* grab RPN[32:43] */
rlwimi r12, r11, 20, 12, 19 /* grab RPN[44:51] */
- mtspr SPRN_MAS3, r12
+2: mtspr SPRN_MAS3, r12
BEGIN_MMU_FTR_SECTION
srwi r10, r13, 12 /* grab RPN[12:31] */
mtspr SPRN_MAS7, r10
END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS)
#else
li r10, (_PAGE_EXEC | _PAGE_PRESENT)
+ mr r13, r11
rlwimi r10, r11, 31, 29, 29 /* extract _PAGE_DIRTY into SW */
and r12, r11, r10
andi. r10, r11, _PAGE_USER /* Test for _PAGE_USER */
slwi r10, r12, 1
or r10, r10, r12
iseleq r12, r12, r10
- rlwimi r11, r12, 0, 20, 31 /* Extract RPN from PTE and merge with perms */
- mtspr SPRN_MAS3, r11
+ rlwimi r13, r12, 0, 20, 31 /* Get RPN from PTE, merge w/ perms */
+ mtspr SPRN_MAS3, r13
#endif
+
+ mfspr r12, SPRN_MAS2
+#ifdef CONFIG_PTE_64BIT
+ rlwimi r12, r11, 32-19, 27, 31 /* extract WIMGE from pte */
+#else
+ rlwimi r12, r11, 26, 27, 31 /* extract WIMGE from pte */
+#endif
+#ifdef CONFIG_HUGETLB_PAGE
+ beq 6, 3f /* don't mask if page isn't huge */
+ li r13, 1
+ slw r13, r13, r14
+ subi r13, r13, 1
+ rlwinm r13, r13, 0, 0, 19 /* bottom bits used for WIMGE/etc */
+ andc r12, r12, r13 /* mask off ea bits within the page */
+#endif
+3: mtspr SPRN_MAS2, r12
+
#ifdef CONFIG_E200
/* Round robin TLB1 entries assignment */
mfspr r12, SPRN_MAS0
mtspr SPRN_MAS0,r12
#endif /* CONFIG_E200 */
+tlb_write_entry:
tlbwe
/* Done...restore registers and get out of here. */
mfspr r10, SPRN_SPRG_THREAD
- lwz r11, THREAD_NORMSAVE(3)(r10)
+#ifdef CONFIG_HUGETLB_PAGE
+ beq 6, 8f /* skip restore for 4k page faults */
+ lwz r14, THREAD_NORMSAVE(4)(r10)
+ lwz r15, THREAD_NORMSAVE(5)(r10)
+ lwz r16, THREAD_NORMSAVE(6)(r10)
+ lwz r17, THREAD_NORMSAVE(7)(r10)
+#endif
+8: lwz r11, THREAD_NORMSAVE(3)(r10)
mtcr r11
lwz r13, THREAD_NORMSAVE(2)(r10)
lwz r12, THREAD_NORMSAVE(1)(r10)
#include <linux/kprobes.h>
#include <linux/percpu.h>
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/smp.h>
*/
#include <linux/init.h>
+#include <linux/export.h>
#include <linux/console.h>
#include <linux/kobject.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/of.h>
#include <linux/slab.h>
+#include <linux/stat.h>
#include <linux/of_platform.h>
#include <asm/ibmebus.h>
#include <asm/abs_addr.h>
static int ibmebus_dma_supported(struct device *dev, u64 mask)
{
- return 1;
+ return mask == DMA_BIT_MASK(64);
+}
+
+static u64 ibmebus_dma_get_required_mask(struct device *dev)
+{
+ return DMA_BIT_MASK(64);
}
static struct dma_map_ops ibmebus_dma_ops = {
- .alloc_coherent = ibmebus_alloc_coherent,
- .free_coherent = ibmebus_free_coherent,
- .map_sg = ibmebus_map_sg,
- .unmap_sg = ibmebus_unmap_sg,
- .dma_supported = ibmebus_dma_supported,
- .map_page = ibmebus_map_page,
- .unmap_page = ibmebus_unmap_page,
+ .alloc_coherent = ibmebus_alloc_coherent,
+ .free_coherent = ibmebus_free_coherent,
+ .map_sg = ibmebus_map_sg,
+ .unmap_sg = ibmebus_unmap_sg,
+ .dma_supported = ibmebus_dma_supported,
+ .get_required_mask = ibmebus_dma_get_required_mask,
+ .map_page = ibmebus_map_page,
+ .unmap_page = ibmebus_unmap_page,
};
static int ibmebus_match_path(struct device *dev, void *data)
ori r4,r4,_TLF_NAPPING /* so when we take an exception */
stw r4,TI_LOCAL_FLAGS(r3) /* it will return to our caller */
-#ifdef CONFIG_E500MC
+#ifdef CONFIG_PPC_E500MC
wrteei 1
1: wait
#include <linux/mm.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/init_task.h>
#undef DEBUG
#include <linux/kernel.h>
+#include <linux/sched.h> /* for init_mm */
#include <asm/io.h>
#include <asm/machdep.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/compiler.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <asm/io.h>
#include <asm/firmware.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/mm.h>
+#include <linux/export.h>
#include <asm/io.h>
#include <asm/pci-bridge.h>
tbl->it_map = page_address(page);
memset(tbl->it_map, 0, sz);
+ /*
+ * Reserve page 0 so it will not be used for any mappings.
+ * This avoids buggy drivers that consider page 0 to be invalid
+ * to crash the machine or even lose data.
+ */
+ if (tbl->it_offset == 0)
+ set_bit(0, tbl->it_map);
+
tbl->it_hint = 0;
tbl->it_largehint = tbl->it_halfpoint;
spin_lock_init(&tbl->it_lock);
#undef DEBUG
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/threads.h>
#include <linux/kernel_stat.h>
#include <linux/signal.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/string.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/notifier.h>
#include <linux/jump_label.h>
#include <asm/code-patching.h>
+#ifdef HAVE_JUMP_LABEL
void arch_jump_label_transform(struct jump_entry *entry,
enum jump_label_type type)
{
else
patch_instruction(addr, PPC_INST_NOP);
}
+#endif
#include <linux/kvm_host.h>
#include <linux/init.h>
+#include <linux/export.h>
#include <linux/kvm_para.h>
#include <linux/slab.h>
#include <linux/of.h>
/* On relocatable kernels interrupts handlers and our code
can be in different regions, so we don't patch them */
- extern u32 __end_interrupts;
if ((ulong)inst < (ulong)&__end_interrupts)
return;
#endif
#include <linux/pci.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
+#include <linux/serial_reg.h>
#include <asm/io.h>
#include <asm/mmu.h>
#include <asm/prom.h>
static unsigned int legacy_serial_count;
static int legacy_serial_console = -1;
+static unsigned int tsi_serial_in(struct uart_port *p, int offset)
+{
+ unsigned int tmp;
+ offset = offset << p->regshift;
+ if (offset == UART_IIR) {
+ tmp = readl(p->membase + (UART_IIR & ~3));
+ return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */
+ } else
+ return readb(p->membase + offset);
+}
+
+static void tsi_serial_out(struct uart_port *p, int offset, int value)
+{
+ offset = offset << p->regshift;
+ if (!((offset == UART_IER) && (value & UART_IER_UUE)))
+ writeb(value, p->membase + offset);
+}
+
static int __init add_legacy_port(struct device_node *np, int want_index,
int iotype, phys_addr_t base,
phys_addr_t taddr, unsigned long irq,
legacy_serial_ports[index].iobase = base;
else
legacy_serial_ports[index].mapbase = base;
+
legacy_serial_ports[index].iotype = iotype;
legacy_serial_ports[index].uartclk = clock;
legacy_serial_ports[index].irq = irq;
legacy_serial_infos[index].speed = spd ? be32_to_cpup(spd) : 0;
legacy_serial_infos[index].irq_check_parent = irq_check_parent;
+ if (iotype == UPIO_TSI) {
+ legacy_serial_ports[index].serial_in = tsi_serial_in;
+ legacy_serial_ports[index].serial_out = tsi_serial_out;
+ }
+
printk(KERN_DEBUG "Found legacy serial port %d for %s\n",
index, np->full_name);
printk(KERN_DEBUG " %s=%llx, taddr=%llx, irq=%lx, clk=%d, speed=%d\n",
}
/* We also should not overwrite the tce tables */
- for (node = of_find_node_by_type(NULL, "pci"); node != NULL;
- node = of_find_node_by_type(node, "pci")) {
+ for_each_node_by_type(node, "pci") {
basep = of_get_property(node, "linux,tce-base", NULL);
sizep = of_get_property(node, "linux,tce-size", NULL);
if (basep == NULL || sizep == NULL)
* kexec bits:
* Copyright (C) 2002-2003 Eric Biederman <ebiederm@xmission.com>
* GameCube/ppc32 port Copyright (C) 2004 Albert Herranz
+ * PPC44x port. Copyright (C) 2011, IBM Corporation
+ * Author: Suzuki Poulose <suzuki@in.ibm.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
mr r4, r30
mr r5, r31
+ li r0, 0
+#elif defined(CONFIG_44x) && !defined(CONFIG_PPC_47x)
+
+/*
+ * Code for setting up 1:1 mapping for PPC440x for KEXEC
+ *
+ * We cannot switch off the MMU on PPC44x.
+ * So we:
+ * 1) Invalidate all the mappings except the one we are running from.
+ * 2) Create a tmp mapping for our code in the other address space(TS) and
+ * jump to it. Invalidate the entry we started in.
+ * 3) Create a 1:1 mapping for 0-2GiB in chunks of 256M in original TS.
+ * 4) Jump to the 1:1 mapping in original TS.
+ * 5) Invalidate the tmp mapping.
+ *
+ * - Based on the kexec support code for FSL BookE
+ * - Doesn't support 47x yet.
+ *
+ */
+ /* Save our parameters */
+ mr r29, r3
+ mr r30, r4
+ mr r31, r5
+
+ /* Load our MSR_IS and TID to MMUCR for TLB search */
+ mfspr r3,SPRN_PID
+ mfmsr r4
+ andi. r4,r4,MSR_IS@l
+ beq wmmucr
+ oris r3,r3,PPC44x_MMUCR_STS@h
+wmmucr:
+ mtspr SPRN_MMUCR,r3
+ sync
+
+ /*
+ * Invalidate all the TLB entries except the current entry
+ * where we are running from
+ */
+ bl 0f /* Find our address */
+0: mflr r5 /* Make it accessible */
+ tlbsx r23,0,r5 /* Find entry we are in */
+ li r4,0 /* Start at TLB entry 0 */
+ li r3,0 /* Set PAGEID inval value */
+1: cmpw r23,r4 /* Is this our entry? */
+ beq skip /* If so, skip the inval */
+ tlbwe r3,r4,PPC44x_TLB_PAGEID /* If not, inval the entry */
+skip:
+ addi r4,r4,1 /* Increment */
+ cmpwi r4,64 /* Are we done? */
+ bne 1b /* If not, repeat */
+ isync
+
+ /* Create a temp mapping and jump to it */
+ andi. r6, r23, 1 /* Find the index to use */
+ addi r24, r6, 1 /* r24 will contain 1 or 2 */
+
+ mfmsr r9 /* get the MSR */
+ rlwinm r5, r9, 27, 31, 31 /* Extract the MSR[IS] */
+ xori r7, r5, 1 /* Use the other address space */
+
+ /* Read the current mapping entries */
+ tlbre r3, r23, PPC44x_TLB_PAGEID
+ tlbre r4, r23, PPC44x_TLB_XLAT
+ tlbre r5, r23, PPC44x_TLB_ATTRIB
+
+ /* Save our current XLAT entry */
+ mr r25, r4
+
+ /* Extract the TLB PageSize */
+ li r10, 1 /* r10 will hold PageSize */
+ rlwinm r11, r3, 0, 24, 27 /* bits 24-27 */
+
+ /* XXX: As of now we use 256M, 4K pages */
+ cmpwi r11, PPC44x_TLB_256M
+ bne tlb_4k
+ rotlwi r10, r10, 28 /* r10 = 256M */
+ b write_out
+tlb_4k:
+ cmpwi r11, PPC44x_TLB_4K
+ bne default
+ rotlwi r10, r10, 12 /* r10 = 4K */
+ b write_out
+default:
+ rotlwi r10, r10, 10 /* r10 = 1K */
+
+write_out:
+ /*
+ * Write out the tmp 1:1 mapping for this code in other address space
+ * Fixup EPN = RPN , TS=other address space
+ */
+ insrwi r3, r7, 1, 23 /* Bit 23 is TS for PAGEID field */
+
+ /* Write out the tmp mapping entries */
+ tlbwe r3, r24, PPC44x_TLB_PAGEID
+ tlbwe r4, r24, PPC44x_TLB_XLAT
+ tlbwe r5, r24, PPC44x_TLB_ATTRIB
+
+ subi r11, r10, 1 /* PageOffset Mask = PageSize - 1 */
+ not r10, r11 /* Mask for PageNum */
+
+ /* Switch to other address space in MSR */
+ insrwi r9, r7, 1, 26 /* Set MSR[IS] = r7 */
+
+ bl 1f
+1: mflr r8
+ addi r8, r8, (2f-1b) /* Find the target offset */
+
+ /* Jump to the tmp mapping */
+ mtspr SPRN_SRR0, r8
+ mtspr SPRN_SRR1, r9
+ rfi
+
+2:
+ /* Invalidate the entry we were executing from */
+ li r3, 0
+ tlbwe r3, r23, PPC44x_TLB_PAGEID
+
+ /* attribute fields. rwx for SUPERVISOR mode */
+ li r5, 0
+ ori r5, r5, (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G)
+
+ /* Create 1:1 mapping in 256M pages */
+ xori r7, r7, 1 /* Revert back to Original TS */
+
+ li r8, 0 /* PageNumber */
+ li r6, 3 /* TLB Index, start at 3 */
+
+next_tlb:
+ rotlwi r3, r8, 28 /* Create EPN (bits 0-3) */
+ mr r4, r3 /* RPN = EPN */
+ ori r3, r3, (PPC44x_TLB_VALID | PPC44x_TLB_256M) /* SIZE = 256M, Valid */
+ insrwi r3, r7, 1, 23 /* Set TS from r7 */
+
+ tlbwe r3, r6, PPC44x_TLB_PAGEID /* PageID field : EPN, V, SIZE */
+ tlbwe r4, r6, PPC44x_TLB_XLAT /* Address translation : RPN */
+ tlbwe r5, r6, PPC44x_TLB_ATTRIB /* Attributes */
+
+ addi r8, r8, 1 /* Increment PN */
+ addi r6, r6, 1 /* Increment TLB Index */
+ cmpwi r8, 8 /* Are we done ? */
+ bne next_tlb
+ isync
+
+ /* Jump to the new mapping 1:1 */
+ li r9,0
+ insrwi r9, r7, 1, 26 /* Set MSR[IS] = r7 */
+
+ bl 1f
+1: mflr r8
+ and r8, r8, r11 /* Get our offset within page */
+ addi r8, r8, (2f-1b)
+
+ and r5, r25, r10 /* Get our target PageNum */
+ or r8, r8, r5 /* Target jump address */
+
+ mtspr SPRN_SRR0, r8
+ mtspr SPRN_SRR1, r9
+ rfi
+2:
+ /* Invalidate the tmp entry we used */
+ li r3, 0
+ tlbwe r3, r24, PPC44x_TLB_PAGEID
+ sync
+
+ /* Restore the parameters */
+ mr r3, r29
+ mr r4, r30
+ mr r5, r31
+
li r0, 0
#else
li r0, 0
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/module.h>
#include <linux/elf.h>
#include <linux/moduleloader.h>
#include <linux/err.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/mod_devicetable.h>
#include <linux/pci.h>
#include <linux/of.h>
*/
#include <linux/smp.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/memblock.h>
#include <asm/firmware.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/bootmem.h>
+#include <linux/export.h>
#include <linux/of_address.h>
#include <linux/of_pci.h>
#include <linux/mm.h>
if (mode == PCI_PROBE_NORMAL)
hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
+
+ /* Configure PCI Express settings */
+ if (bus && !pci_has_flag(PCI_PROBE_ONLY)) {
+ struct pci_bus *child;
+ list_for_each_entry(child, &bus->children, node) {
+ struct pci_dev *self = child->self;
+ if (!self)
+ continue;
+ pcie_bus_configure_settings(child, self->pcie_mpss);
+ }
+ }
}
static void fixup_hide_host_resource_fsl(struct pci_dev *dev)
#include <linux/list.h>
#include <linux/of.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/bootmem.h>
+#include <linux/export.h>
#include <linux/mm.h>
#include <linux/list.h>
#include <linux/syscalls.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/string.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/gfp.h>
*/
#include <linux/pci.h>
+#include <linux/export.h>
#include <asm/pci-bridge.h>
#include <asm/prom.h>
#include <linux/errno.h>
#include <linux/spinlock.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <asm/processor.h>
#include <asm/cputable.h>
*/
static int power6_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
[C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */
- [C(OP_READ)] = { 0x80082, 0x80080 },
- [C(OP_WRITE)] = { 0x80086, 0x80088 },
+ [C(OP_READ)] = { 0x280030, 0x80080 },
+ [C(OP_WRITE)] = { 0x180032, 0x80088 },
[C(OP_PREFETCH)] = { 0x810a4, 0 },
},
[C(L1I)] = { /* RESULT_ACCESS RESULT_MISS */
static int power7_generic_events[] = {
[PERF_COUNT_HW_CPU_CYCLES] = 0x1e,
+ [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = 0x100f8, /* GCT_NOSLOT_CYC */
+ [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = 0x4000a, /* CMPLU_STALL */
[PERF_COUNT_HW_INSTRUCTIONS] = 2,
[PERF_COUNT_HW_CACHE_REFERENCES] = 0xc880, /* LD_REF_L1_LSU*/
[PERF_COUNT_HW_CACHE_MISSES] = 0x400f0, /* LD_MISS_L1 */
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/threads.h>
#include <linux/smp.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/prctl.h>
#include <linux/init_task.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/kallsyms.h>
#include <linux/mqueue.h>
#include <linux/hardirq.h>
new_thread = &new->thread;
old_thread = ¤t->thread;
-#if defined(CONFIG_PPC_BOOK3E_64)
- /* XXX Current Book3E code doesn't deal with kernel side DBCR0,
- * we always hold the user values, so we set it now.
- *
- * However, we ensure the kernel MSR:DE is appropriately cleared too
- * to avoid spurrious single step exceptions in the kernel.
- *
- * This will have to change to merge with the ppc32 code at some point,
- * but I don't like much what ppc32 is doing today so there's some
- * thinking needed there
- */
- if ((new_thread->dbcr0 | old_thread->dbcr0) & DBCR0_IDM) {
- u32 dbcr0;
-
- mtmsr(mfmsr() & ~MSR_DE);
- isync();
- dbcr0 = mfspr(SPRN_DBCR0);
- dbcr0 = (dbcr0 & DBCR0_EDM) | new_thread->dbcr0;
- mtspr(SPRN_DBCR0, dbcr0);
- }
-#endif /* CONFIG_PPC64_BOOK3E */
-
#ifdef CONFIG_PPC64
/*
* Collect processor utilization data per process
if ((regs->trap != 0xc00) && cpu_has_feature(CPU_FTR_CFAR))
printk("CFAR: "REG"\n", regs->orig_gpr3);
if (trap == 0x300 || trap == 0x600)
-#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
printk("DEAR: "REG", ESR: "REG"\n", regs->dar, regs->dsisr);
#else
printk("DAR: "REG", DSISR: %08lx\n", regs->dar, regs->dsisr);
#include <linux/delay.h>
#include <linux/initrd.h>
#include <linux/bitops.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/kexec.h>
#include <linux/debugfs.h>
#include <linux/irq.h>
#include <asm/pci-bridge.h>
#include <asm/phyp_dump.h>
#include <asm/kexec.h>
+#include <asm/opal.h>
+
#include <mm/mmu_decl.h>
#ifdef DEBUG
of_scan_flat_dt(early_init_dt_scan_rtas, NULL);
#endif
+#ifdef CONFIG_PPC_POWERNV
+ /* Some machines might need OPAL info for debugging, grab it now. */
+ of_scan_flat_dt(early_init_dt_scan_opal, NULL);
+#endif
+
#ifdef CONFIG_PHYP_DUMP
/* scan tree to see if dump occurred during last boot */
of_scan_flat_dt(early_init_dt_scan_phyp_dump, NULL);
#endif
+ /* Pre-initialize the cmd_line with the content of boot_commmand_line,
+ * which will be empty except when the content of the variable has
+ * been overriden by a bootloading mechanism. This happens typically
+ * with HAL takeover
+ */
+ strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE);
+
/* Retrieve various informations from the /chosen node of the
* device-tree, including the platform type, initrd location and
* size, TCE reserve, and more ...
of_scan_flat_dt(early_init_dt_scan_root, NULL);
of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
- setup_initial_memory_limit(memstart_addr, first_memblock_size);
/* Save command line for /proc/cmdline and then parse parameters */
strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
parse_early_param();
+ /* make sure we've parsed cmdline for mem= before this */
+ if (memory_limit)
+ first_memblock_size = min(first_memblock_size, memory_limit);
+ setup_initial_memory_limit(memstart_addr, first_memblock_size);
/* Reserve MEMBLOCK regions used by kernel, initrd, dt, etc... */
memblock_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
/* If relocatable, reserve first 32k for interrupt vectors etc. */
#include <asm/btext.h>
#include <asm/sections.h>
#include <asm/machdep.h>
+#include <asm/opal.h>
#include <linux/linux_logo.h>
typedef u32 cell_t;
-extern void __start(unsigned long r3, unsigned long r4, unsigned long r5);
+extern void __start(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7, unsigned long r8,
+ unsigned long r9);
#ifdef CONFIG_PPC64
extern int enter_prom(struct prom_args *args, unsigned long entry);
#define PLATFORM_LPAR 0x0001
#define PLATFORM_POWERMAC 0x0400
#define PLATFORM_GENERIC 0x0500
+#define PLATFORM_OPAL 0x0600
static int __initdata of_platform;
}
}
-#ifdef CONFIG_PPC_PSERIES
+#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
/*
* There are two methods for telling firmware what our capabilities are.
* Newer machines have an "ibm,client-architecture-support" method on the
prom_printf(" ram_top : %x\n", RELOC(ram_top));
}
+static void __init prom_close_stdin(void)
+{
+ struct prom_t *_prom = &RELOC(prom);
+ ihandle val;
+
+ if (prom_getprop(_prom->chosen, "stdin", &val, sizeof(val)) > 0)
+ call_prom("close", 1, 0, val);
+}
+
+#ifdef CONFIG_PPC_POWERNV
+
+static u64 __initdata prom_opal_size;
+static u64 __initdata prom_opal_align;
+static int __initdata prom_rtas_start_cpu;
+static u64 __initdata prom_rtas_data;
+static u64 __initdata prom_rtas_entry;
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL
+static u64 __initdata prom_opal_base;
+static u64 __initdata prom_opal_entry;
+#endif
+
+/* XXX Don't change this structure without updating opal-takeover.S */
+static struct opal_secondary_data {
+ s64 ack; /* 0 */
+ u64 go; /* 8 */
+ struct opal_takeover_args args; /* 16 */
+} opal_secondary_data;
+
+extern char opal_secondary_entry;
+
+static void prom_query_opal(void)
+{
+ long rc;
+
+ /* We must not query for OPAL presence on a machine that
+ * supports TNK takeover (970 blades), as this uses the same
+ * h-call with different arguments and will crash
+ */
+ if (PHANDLE_VALID(call_prom("finddevice", 1, 1,
+ ADDR("/tnk-memory-map")))) {
+ prom_printf("TNK takeover detected, skipping OPAL check\n");
+ return;
+ }
+
+ prom_printf("Querying for OPAL presence... ");
+ rc = opal_query_takeover(&RELOC(prom_opal_size),
+ &RELOC(prom_opal_align));
+ prom_debug("(rc = %ld) ", rc);
+ if (rc != 0) {
+ prom_printf("not there.\n");
+ return;
+ }
+ RELOC(of_platform) = PLATFORM_OPAL;
+ prom_printf(" there !\n");
+ prom_debug(" opal_size = 0x%lx\n", RELOC(prom_opal_size));
+ prom_debug(" opal_align = 0x%lx\n", RELOC(prom_opal_align));
+ if (RELOC(prom_opal_align) < 0x10000)
+ RELOC(prom_opal_align) = 0x10000;
+}
+
+static int prom_rtas_call(int token, int nargs, int nret, int *outputs, ...)
+{
+ struct rtas_args rtas_args;
+ va_list list;
+ int i;
+
+ rtas_args.token = token;
+ rtas_args.nargs = nargs;
+ rtas_args.nret = nret;
+ rtas_args.rets = (rtas_arg_t *)&(rtas_args.args[nargs]);
+ va_start(list, outputs);
+ for (i = 0; i < nargs; ++i)
+ rtas_args.args[i] = va_arg(list, rtas_arg_t);
+ va_end(list);
+
+ for (i = 0; i < nret; ++i)
+ rtas_args.rets[i] = 0;
+
+ opal_enter_rtas(&rtas_args, RELOC(prom_rtas_data),
+ RELOC(prom_rtas_entry));
+
+ if (nret > 1 && outputs != NULL)
+ for (i = 0; i < nret-1; ++i)
+ outputs[i] = rtas_args.rets[i+1];
+ return (nret > 0)? rtas_args.rets[0]: 0;
+}
+
+static void __init prom_opal_hold_cpus(void)
+{
+ int i, cnt, cpu, rc;
+ long j;
+ phandle node;
+ char type[64];
+ u32 servers[8];
+ struct prom_t *_prom = &RELOC(prom);
+ void *entry = (unsigned long *)&RELOC(opal_secondary_entry);
+ struct opal_secondary_data *data = &RELOC(opal_secondary_data);
+
+ prom_debug("prom_opal_hold_cpus: start...\n");
+ prom_debug(" - entry = 0x%x\n", entry);
+ prom_debug(" - data = 0x%x\n", data);
+
+ data->ack = -1;
+ data->go = 0;
+
+ /* look for cpus */
+ for (node = 0; prom_next_node(&node); ) {
+ type[0] = 0;
+ prom_getprop(node, "device_type", type, sizeof(type));
+ if (strcmp(type, RELOC("cpu")) != 0)
+ continue;
+
+ /* Skip non-configured cpus. */
+ if (prom_getprop(node, "status", type, sizeof(type)) > 0)
+ if (strcmp(type, RELOC("okay")) != 0)
+ continue;
+
+ cnt = prom_getprop(node, "ibm,ppc-interrupt-server#s", servers,
+ sizeof(servers));
+ if (cnt == PROM_ERROR)
+ break;
+ cnt >>= 2;
+ for (i = 0; i < cnt; i++) {
+ cpu = servers[i];
+ prom_debug("CPU %d ... ", cpu);
+ if (cpu == _prom->cpu) {
+ prom_debug("booted !\n");
+ continue;
+ }
+ prom_debug("starting ... ");
+
+ /* Init the acknowledge var which will be reset by
+ * the secondary cpu when it awakens from its OF
+ * spinloop.
+ */
+ data->ack = -1;
+ rc = prom_rtas_call(RELOC(prom_rtas_start_cpu), 3, 1,
+ NULL, cpu, entry, data);
+ prom_debug("rtas rc=%d ...", rc);
+
+ for (j = 0; j < 100000000 && data->ack == -1; j++) {
+ HMT_low();
+ mb();
+ }
+ HMT_medium();
+ if (data->ack != -1)
+ prom_debug("done, PIR=0x%x\n", data->ack);
+ else
+ prom_debug("timeout !\n");
+ }
+ }
+ prom_debug("prom_opal_hold_cpus: end...\n");
+}
+
+static void prom_opal_takeover(void)
+{
+ struct opal_secondary_data *data = &RELOC(opal_secondary_data);
+ struct opal_takeover_args *args = &data->args;
+ u64 align = RELOC(prom_opal_align);
+ u64 top_addr, opal_addr;
+
+ args->k_image = (u64)RELOC(_stext);
+ args->k_size = _end - _stext;
+ args->k_entry = 0;
+ args->k_entry2 = 0x60;
+
+ top_addr = _ALIGN_UP(args->k_size, align);
+
+ if (RELOC(prom_initrd_start) != 0) {
+ args->rd_image = RELOC(prom_initrd_start);
+ args->rd_size = RELOC(prom_initrd_end) - args->rd_image;
+ args->rd_loc = top_addr;
+ top_addr = _ALIGN_UP(args->rd_loc + args->rd_size, align);
+ }
+
+ /* Pickup an address for the HAL. We want to go really high
+ * up to avoid problem with future kexecs. On the other hand
+ * we don't want to be all over the TCEs on P5IOC2 machines
+ * which are going to be up there too. We assume the machine
+ * has plenty of memory, and we ask for the HAL for now to
+ * be just below the 1G point, or above the initrd
+ */
+ opal_addr = _ALIGN_DOWN(0x40000000 - RELOC(prom_opal_size), align);
+ if (opal_addr < top_addr)
+ opal_addr = top_addr;
+ args->hal_addr = opal_addr;
+
+ /* Copy the command line to the kernel image */
+ strlcpy(RELOC(boot_command_line), RELOC(prom_cmd_line),
+ COMMAND_LINE_SIZE);
+
+ prom_debug(" k_image = 0x%lx\n", args->k_image);
+ prom_debug(" k_size = 0x%lx\n", args->k_size);
+ prom_debug(" k_entry = 0x%lx\n", args->k_entry);
+ prom_debug(" k_entry2 = 0x%lx\n", args->k_entry2);
+ prom_debug(" hal_addr = 0x%lx\n", args->hal_addr);
+ prom_debug(" rd_image = 0x%lx\n", args->rd_image);
+ prom_debug(" rd_size = 0x%lx\n", args->rd_size);
+ prom_debug(" rd_loc = 0x%lx\n", args->rd_loc);
+ prom_printf("Performing OPAL takeover,this can take a few minutes..\n");
+ prom_close_stdin();
+ mb();
+ data->go = 1;
+ for (;;)
+ opal_do_takeover(args);
+}
+
+/*
+ * Allocate room for and instantiate OPAL
+ */
+static void __init prom_instantiate_opal(void)
+{
+ phandle opal_node;
+ ihandle opal_inst;
+ u64 base, entry;
+ u64 size = 0, align = 0x10000;
+ u32 rets[2];
+
+ prom_debug("prom_instantiate_opal: start...\n");
+
+ opal_node = call_prom("finddevice", 1, 1, ADDR("/ibm,opal"));
+ prom_debug("opal_node: %x\n", opal_node);
+ if (!PHANDLE_VALID(opal_node))
+ return;
+
+ prom_getprop(opal_node, "opal-runtime-size", &size, sizeof(size));
+ if (size == 0)
+ return;
+ prom_getprop(opal_node, "opal-runtime-alignment", &align,
+ sizeof(align));
+
+ base = alloc_down(size, align, 0);
+ if (base == 0) {
+ prom_printf("OPAL allocation failed !\n");
+ return;
+ }
+
+ opal_inst = call_prom("open", 1, 1, ADDR("/ibm,opal"));
+ if (!IHANDLE_VALID(opal_inst)) {
+ prom_printf("opening opal package failed (%x)\n", opal_inst);
+ return;
+ }
+
+ prom_printf("instantiating opal at 0x%x...", base);
+
+ if (call_prom_ret("call-method", 4, 3, rets,
+ ADDR("load-opal-runtime"),
+ opal_inst,
+ base >> 32, base & 0xffffffff) != 0
+ || (rets[0] == 0 && rets[1] == 0)) {
+ prom_printf(" failed\n");
+ return;
+ }
+ entry = (((u64)rets[0]) << 32) | rets[1];
+
+ prom_printf(" done\n");
+
+ reserve_mem(base, size);
+
+ prom_debug("opal base = 0x%x\n", base);
+ prom_debug("opal align = 0x%x\n", align);
+ prom_debug("opal entry = 0x%x\n", entry);
+ prom_debug("opal size = 0x%x\n", (long)size);
+
+ prom_setprop(opal_node, "/ibm,opal", "opal-base-address",
+ &base, sizeof(base));
+ prom_setprop(opal_node, "/ibm,opal", "opal-entry-address",
+ &entry, sizeof(entry));
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL
+ RELOC(prom_opal_base) = base;
+ RELOC(prom_opal_entry) = entry;
+#endif
+ prom_debug("prom_instantiate_opal: end...\n");
+}
+
+#endif /* CONFIG_PPC_POWERNV */
/*
* Allocate room for and instantiate RTAS
return;
base = alloc_down(size, PAGE_SIZE, 0);
- if (base == 0) {
- prom_printf("RTAS allocation failed !\n");
- return;
- }
+ if (base == 0)
+ prom_panic("Could not allocate memory for RTAS\n");
rtas_inst = call_prom("open", 1, 1, ADDR("/rtas"));
if (!IHANDLE_VALID(rtas_inst)) {
prom_setprop(rtas_node, "/rtas", "linux,rtas-entry",
&entry, sizeof(entry));
+#ifdef CONFIG_PPC_POWERNV
+ /* PowerVN takeover hack */
+ RELOC(prom_rtas_data) = base;
+ RELOC(prom_rtas_entry) = entry;
+ prom_getprop(rtas_node, "start-cpu", &RELOC(prom_rtas_start_cpu), 4);
+#endif
prom_debug("rtas base = 0x%x\n", base);
prom_debug("rtas entry = 0x%x\n", entry);
prom_debug("rtas size = 0x%x\n", (long)size);
*acknowledge = (unsigned long)-1;
if (reg != _prom->cpu) {
- /* Primary Thread of non-boot cpu */
+ /* Primary Thread of non-boot cpu or any thread */
prom_printf("starting cpu hw idx %lu... ", reg);
call_prom("start-cpu", 3, 0, node,
secondary_hold, reg);
prom_setprop(val, path, "linux,boot-display", NULL, 0);
}
-static void __init prom_close_stdin(void)
-{
- struct prom_t *_prom = &RELOC(prom);
- ihandle val;
-
- if (prom_getprop(_prom->chosen, "stdin", &val, sizeof(val)) > 0)
- call_prom("close", 1, 0, val);
-}
-
static int __init prom_find_machine_type(void)
{
struct prom_t *_prom = &RELOC(prom);
int x;
#endif
- /* Look for a PowerMac */
+ /* Look for a PowerMac or a Cell */
len = prom_getprop(_prom->root, "compatible",
compat, sizeof(compat)-1);
if (len > 0) {
}
}
#ifdef CONFIG_PPC64
- /* If not a mac, try to figure out if it's an IBM pSeries or any other
+ /* Try to detect OPAL */
+ if (PHANDLE_VALID(call_prom("finddevice", 1, 1, ADDR("/ibm,opal"))))
+ return PLATFORM_OPAL;
+
+ /* Try to figure out if it's an IBM pSeries or any other
* PAPR compliant platform. We assume it is if :
* - /device_type is "chrp" (please, do NOT use that for future
* non-IBM designs !
unsigned long soff;
unsigned char *valp;
static char pname[MAX_PROPERTY_NAME];
- int l, room;
+ int l, room, has_phandle = 0;
dt_push_token(OF_DT_BEGIN_NODE, mem_start, mem_end);
valp = make_room(mem_start, mem_end, l, 4);
call_prom("getprop", 4, 1, node, RELOC(pname), valp, l);
*mem_start = _ALIGN(*mem_start, 4);
+
+ if (!strcmp(RELOC(pname), RELOC("phandle")))
+ has_phandle = 1;
}
- /* Add a "linux,phandle" property. */
- soff = dt_find_string(RELOC("linux,phandle"));
- if (soff == 0)
- prom_printf("WARNING: Can't find string index for"
- " <linux-phandle> node %s\n", path);
- else {
- dt_push_token(OF_DT_PROP, mem_start, mem_end);
- dt_push_token(4, mem_start, mem_end);
- dt_push_token(soff, mem_start, mem_end);
- valp = make_room(mem_start, mem_end, 4, 4);
- *(u32 *)valp = node;
+ /* Add a "linux,phandle" property if no "phandle" property already
+ * existed (can happen with OPAL)
+ */
+ if (!has_phandle) {
+ soff = dt_find_string(RELOC("linux,phandle"));
+ if (soff == 0)
+ prom_printf("WARNING: Can't find string index for"
+ " <linux-phandle> node %s\n", path);
+ else {
+ dt_push_token(OF_DT_PROP, mem_start, mem_end);
+ dt_push_token(4, mem_start, mem_end);
+ dt_push_token(soff, mem_start, mem_end);
+ valp = make_room(mem_start, mem_end, 4, 4);
+ *(u32 *)valp = node;
+ }
}
/* do all our children */
#endif /* CONFIG_BLK_DEV_INITRD */
}
+
/*
* We enter here early on, when the Open Firmware prom is still
* handling exceptions and the MMU hash table for us.
* between pSeries SMP and pSeries LPAR
*/
RELOC(of_platform) = prom_find_machine_type();
+ prom_printf("Detected machine type: %x\n", RELOC(of_platform));
#ifndef CONFIG_RELOCATABLE
/* Bail if this is a kdump kernel. */
*/
prom_check_initrd(r3, r4);
-#ifdef CONFIG_PPC_PSERIES
+#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
/*
* On pSeries, inform the firmware about our capabilities
*/
#endif
/*
- * On non-powermacs, try to instantiate RTAS and puts all CPUs
- * in spin-loops. PowerMacs don't have a working RTAS and use
- * a different way to spin CPUs
+ * On non-powermacs, try to instantiate RTAS. PowerMacs don't
+ * have a usable RTAS implementation.
*/
- if (RELOC(of_platform) != PLATFORM_POWERMAC) {
+ if (RELOC(of_platform) != PLATFORM_POWERMAC &&
+ RELOC(of_platform) != PLATFORM_OPAL)
prom_instantiate_rtas();
+
+#ifdef CONFIG_PPC_POWERNV
+ /* Detect HAL and try instanciating it & doing takeover */
+ if (RELOC(of_platform) == PLATFORM_PSERIES_LPAR) {
+ prom_query_opal();
+ if (RELOC(of_platform) == PLATFORM_OPAL) {
+ prom_opal_hold_cpus();
+ prom_opal_takeover();
+ }
+ } else if (RELOC(of_platform) == PLATFORM_OPAL)
+ prom_instantiate_opal();
+#endif
+
+ /*
+ * On non-powermacs, put all CPUs in spin-loops.
+ *
+ * PowerMacs use a different mechanism to spin CPUs
+ */
+ if (RELOC(of_platform) != PLATFORM_POWERMAC &&
+ RELOC(of_platform) != PLATFORM_OPAL)
prom_hold_cpus();
- }
/*
* Fill in some infos for use by the kernel later on
reloc_got2(-offset);
#endif
- __start(hdr, kbase, 0);
+#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL
+ /* OPAL early debug gets the OPAL base & entry in r8 and r9 */
+ __start(hdr, kbase, 0, 0, 0,
+ RELOC(prom_opal_base), RELOC(prom_opal_entry));
+#else
+ __start(hdr, kbase, 0, 0, 0, 0, 0);
+#endif
return 0;
}
_end enter_prom memcpy memset reloc_offset __secondary_hold
__secondary_hold_acknowledge __secondary_hold_spinloop __start
strcmp strcpy strlcpy strlen strncmp strstr logo_linux_clut224
-reloc_got2 kernstart_addr memstart_addr linux_banner"
+reloc_got2 kernstart_addr memstart_addr linux_banner _stext
+opal_query_takeover opal_do_takeover opal_enter_rtas opal_secondary_entry
+boot_command_line"
NM="$1"
OBJ="$2"
#include <linux/kernel.h>
#include <linux/string.h>
-#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/etherdevice.h>
#include <linux/of_address.h>
#include <linux/seccomp.h>
#include <linux/audit.h>
#include <trace/syscall.h>
-#ifdef CONFIG_PPC32
-#include <linux/module.h>
-#endif
#include <linux/hw_breakpoint.h>
#include <linux/perf_event.h>
if (index < PT_FPR0) {
tmp = ptrace_get_reg(child, (int) index);
} else {
+ unsigned int fpidx = index - PT_FPR0;
+
flush_fp_to_thread(child);
- tmp = ((unsigned long *)child->thread.fpr)
- [TS_FPRWIDTH * (index - PT_FPR0)];
+ if (fpidx < (PT_FPSCR - PT_FPR0))
+ tmp = ((unsigned long *)child->thread.fpr)
+ [fpidx * TS_FPRWIDTH];
+ else
+ tmp = child->thread.fpscr.val;
}
ret = put_user(tmp, datalp);
break;
if (index < PT_FPR0) {
ret = ptrace_put_reg(child, index, data);
} else {
+ unsigned int fpidx = index - PT_FPR0;
+
flush_fp_to_thread(child);
- ((unsigned long *)child->thread.fpr)
- [TS_FPRWIDTH * (index - PT_FPR0)] = data;
+ if (fpidx < (PT_FPSCR - PT_FPR0))
+ ((unsigned long *)child->thread.fpr)
+ [fpidx * TS_FPRWIDTH] = data;
+ else
+ child->thread.fpscr.val = data;
ret = 0;
}
break;
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/spinlock.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/capability.h>
#include <linux/delay.h>
#undef DEBUG
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/string.h>
#include <linux/sched.h>
#include <linux/init.h>
PTRRELOC(&__start___lwsync_fixup),
PTRRELOC(&__stop___lwsync_fixup));
+ do_final_fixups();
+
return KERNELBASE + offset;
}
* This is called very early on the boot process, after a minimal
* MMU environment has been set up but before MMU_init is called.
*/
-notrace void __init machine_init(unsigned long dt_ptr)
+notrace void __init machine_init(u64 dt_ptr)
{
lockdep_init();
#undef DEBUG
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/string.h>
#include <linux/sched.h>
#include <linux/init.h>
DBG(" -> initialize_cache_info()\n");
- for (np = NULL; (np = of_find_node_by_type(np, "cpu"));) {
+ for_each_node_by_type(np, "cpu") {
num_cpus += 1;
- /* We're assuming *all* of the CPUs have the same
+ /*
+ * We're assuming *all* of the CPUs have the same
* d-cache and i-cache sizes... -Peter
*/
-
- if ( num_cpus == 1 ) {
+ if (num_cpus == 1) {
const u32 *sizep, *lsizep;
u32 size, lsize;
sizep = of_get_property(np, "d-cache-size", NULL);
if (sizep != NULL)
size = *sizep;
- lsizep = of_get_property(np, "d-cache-block-size", NULL);
+ lsizep = of_get_property(np, "d-cache-block-size",
+ NULL);
/* fallback if block size missing */
if (lsizep == NULL)
- lsizep = of_get_property(np, "d-cache-line-size", NULL);
+ lsizep = of_get_property(np,
+ "d-cache-line-size",
+ NULL);
if (lsizep != NULL)
lsize = *lsizep;
if (sizep == 0 || lsizep == 0)
sizep = of_get_property(np, "i-cache-size", NULL);
if (sizep != NULL)
size = *sizep;
- lsizep = of_get_property(np, "i-cache-block-size", NULL);
+ lsizep = of_get_property(np, "i-cache-block-size",
+ NULL);
if (lsizep == NULL)
- lsizep = of_get_property(np, "i-cache-line-size", NULL);
+ lsizep = of_get_property(np,
+ "i-cache-line-size",
+ NULL);
if (lsizep != NULL)
lsize = *lsizep;
if (sizep == 0 || lsizep == 0)
&__start___fw_ftr_fixup, &__stop___fw_ftr_fixup);
do_lwsync_fixups(cur_cpu_spec->cpu_features,
&__start___lwsync_fixup, &__stop___lwsync_fixup);
+ do_final_fixups();
/*
* Unflatten the device-tree passed by prom_init or kexec
compat_sigset_t cset;
switch (_NSIG_WORDS) {
- case 4: cset.sig[5] = set->sig[3] & 0xffffffffull;
+ case 4: cset.sig[6] = set->sig[3] & 0xffffffffull;
cset.sig[7] = set->sig[3] >> 32;
case 3: cset.sig[4] = set->sig[2] & 0xffffffffull;
cset.sig[5] = set->sig[2] >> 32;
#include <linux/stddef.h>
#include <linux/elf.h>
#include <linux/ptrace.h>
-#include <linux/module.h>
#include <linux/ratelimit.h>
#include <asm/sigcontext.h>
#undef DEBUG
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/interrupt.h>
static DEFINE_PER_CPU(struct task_struct *, idle_thread_array);
#define get_idle_for_cpu(x) (per_cpu(idle_thread_array, x))
#define set_idle_for_cpu(x, p) (per_cpu(idle_thread_array, x) = (p))
+
+/* State of each CPU during hotplug phases */
+static DEFINE_PER_CPU(int, cpu_state) = { 0 };
+
#else
static struct task_struct *idle_thread_array[NR_CPUS] __cpuinitdata ;
#define get_idle_for_cpu(x) (idle_thread_array[(x)])
* cpu_start field to become non-zero After we set cpu_start,
* the processor will continue on to secondary_start
*/
- paca[nr].cpu_start = 1;
- smp_mb();
+ if (!paca[nr].cpu_start) {
+ paca[nr].cpu_start = 1;
+ smp_mb();
+ return 0;
+ }
+
+#ifdef CONFIG_HOTPLUG_CPU
+ /*
+ * Ok it's not there, so it might be soft-unplugged, let's
+ * try to bring it back
+ */
+ per_cpu(cpu_state, nr) = CPU_UP_PREPARE;
+ smp_wmb();
+ smp_send_reschedule(nr);
+#endif /* CONFIG_HOTPLUG_CPU */
return 0;
}
-#endif
+#endif /* CONFIG_PPC64 */
static irqreturn_t call_function_action(int irq, void *data)
{
return 1;
}
#endif
- err = request_irq(virq, smp_ipi_action[msg], IRQF_DISABLED|IRQF_PERCPU,
+ err = request_irq(virq, smp_ipi_action[msg], IRQF_PERCPU,
smp_ipi_name[msg], 0);
WARN(err < 0, "unable to request_irq %d for %s (rc %d)\n",
virq, smp_ipi_name[msg], err);
}
#ifdef CONFIG_HOTPLUG_CPU
-/* State of each CPU during hotplug phases */
-static DEFINE_PER_CPU(int, cpu_state) = { 0 };
int generic_cpu_disable(void)
{
{
per_cpu(cpu_state, cpu) = CPU_DEAD;
}
+
+int generic_check_cpu_restart(unsigned int cpu)
+{
+ return per_cpu(cpu_state, cpu) == CPU_UP_PREPARE;
+}
#endif
struct create_idle {
* 2 of the License, or (at your option) any later version.
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/sched.h>
#include <linux/stacktrace.h>
#include <asm/ptrace.h>
void restore_processor_state(void)
{
#ifdef CONFIG_PPC32
- switch_mmu_context(NULL, current->active_mm);
+ switch_mmu_context(current->active_mm, current->active_mm);
#endif
}
#include <asm/system.h>
#include <asm/iommu.h>
#include <linux/irq.h>
+#include <linux/sched.h>
#include <linux/interrupt.h>
void do_after_copyback(void)
#include <linux/percpu.h>
#include <linux/init.h>
#include <linux/sched.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/nodemask.h>
#include <linux/cpumask.h>
#include <linux/notifier.h>
*/
#include <linux/errno.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/param.h>
if (reason & MCSR_DCPERR_MC) {
printk("Data Cache Parity Error\n");
- recoverable = 0;
+
+ /*
+ * In write shadow mode we auto-recover from the error, but it
+ * may still get logged and cause a machine check. We should
+ * only treat the non-write shadow case as non-recoverable.
+ */
+ if (!(mfspr(SPRN_L1CSR2) & L1CSR2_DCWS))
+ recoverable = 0;
}
if (reason & MCSR_L2MMU_MHIT) {
if (user_mode(regs)) {
current->thread.dbcr0 &= ~DBCR0_IC;
-#ifdef CONFIG_PPC_ADV_DEBUG_REGS
if (DBCR_ACTIVE_EVENTS(current->thread.dbcr0,
current->thread.dbcr1))
regs->msr |= MSR_DE;
else
/* Make sure the IDM bit is off */
current->thread.dbcr0 &= ~DBCR0_IDM;
-#endif
}
_exception(SIGTRAP, regs, TRAP_TRACE, regs->nip);
udbg_init_wsp();
#elif defined(CONFIG_PPC_EARLY_DEBUG_EHV_BC)
udbg_init_ehv_bc();
+#elif defined(CONFIG_PPC_EARLY_DEBUG_PS3GELIC)
+ udbg_init_ps3gelic();
+#elif defined(CONFIG_PPC_EARLY_DEBUG_OPAL_RAW)
+ udbg_init_debug_opal_raw();
+#elif defined(CONFIG_PPC_EARLY_DEBUG_OPAL_HVSI)
+ udbg_init_debug_opal_hvsi();
#endif
#ifdef CONFIG_PPC_EARLY_DEBUG
* 2 of the License, or (at your option) any later version.
*/
-#include <linux/module.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
*/
#include <linux/types.h>
+#include <linux/stat.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/console.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/mm.h>
#include <linux/dma-mapping.h>
#include <linux/kobject.h>
return dma_iommu_ops.dma_supported(dev, mask);
}
-struct dma_map_ops vio_dma_mapping_ops = {
- .alloc_coherent = vio_dma_iommu_alloc_coherent,
- .free_coherent = vio_dma_iommu_free_coherent,
- .map_sg = vio_dma_iommu_map_sg,
- .unmap_sg = vio_dma_iommu_unmap_sg,
- .map_page = vio_dma_iommu_map_page,
- .unmap_page = vio_dma_iommu_unmap_page,
- .dma_supported = vio_dma_iommu_dma_supported,
+static u64 vio_dma_get_required_mask(struct device *dev)
+{
+ return dma_iommu_ops.get_required_mask(dev);
+}
+struct dma_map_ops vio_dma_mapping_ops = {
+ .alloc_coherent = vio_dma_iommu_alloc_coherent,
+ .free_coherent = vio_dma_iommu_free_coherent,
+ .map_sg = vio_dma_iommu_map_sg,
+ .unmap_sg = vio_dma_iommu_unmap_sg,
+ .map_page = vio_dma_iommu_map_page,
+ .unmap_page = vio_dma_iommu_unmap_page,
+ .dma_supported = vio_dma_iommu_dma_supported,
+ .get_required_mask = vio_dma_get_required_mask,
};
/**
#include <linux/kvm_host.h>
#include <linux/slab.h>
#include <linux/err.h>
+#include <linux/export.h>
#include <asm/reg.h>
#include <asm/cputable.h>
#include <linux/kvm_host.h>
#include <linux/err.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <asm/reg.h>
* Authors: Alexander Graf <agraf@suse.de>
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <asm/kvm_book3s.h>
#ifdef CONFIG_KVM_BOOK3S_64_HV
#include <linux/preempt.h>
#include <linux/sched.h>
#include <linux/delay.h>
+#include <linux/export.h>
#include <linux/fs.h>
#include <linux/anon_inodes.h>
#include <linux/cpumask.h>
#include <asm/processor.h>
#include <asm/cputhreads.h>
#include <asm/page.h>
+#include <asm/hvcall.h>
#include <linux/gfp.h>
#include <linux/sched.h>
#include <linux/vmalloc.h>
#include <linux/kvm_host.h>
#include <linux/preempt.h>
+#include <linux/export.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/bootmem.h>
addi r6,r5,VCORE_NAPPING_THREADS
31: lwarx r4,0,r6
or r4,r4,r0
- popcntw r7,r4
+ PPC_POPCNTW(r7,r4)
cmpw r7,r8
bge 2f
stwcx. r4,0,r6
*/
#include <linux/kvm_host.h>
+#include <linux/export.h>
#include <linux/err.h>
#include <linux/slab.h>
#ifdef CONFIG_PPC_BOOK3S_64
if ((pvr >= 0x330000) && (pvr < 0x70330000)) {
kvmppc_mmu_book3s_64_init(vcpu);
- if (!to_book3s(vcpu)->hior_sregs)
- to_book3s(vcpu)->hior = 0xfff00000;
+ to_book3s(vcpu)->hior = 0xfff00000;
to_book3s(vcpu)->msr_mask = 0xffffffffffffffffULL;
vcpu->arch.cpu_type = KVM_CPU_3S_64;
} else
#endif
{
kvmppc_mmu_book3s_32_init(vcpu);
- if (!to_book3s(vcpu)->hior_sregs)
- to_book3s(vcpu)->hior = 0;
+ to_book3s(vcpu)->hior = 0;
to_book3s(vcpu)->msr_mask = 0xffffffffULL;
vcpu->arch.cpu_type = KVM_CPU_3S_32;
}
}
}
- if (sregs->u.s.flags & KVM_SREGS_S_HIOR)
- sregs->u.s.hior = to_book3s(vcpu)->hior;
-
return 0;
}
/* Flush the MMU after messing with the segments */
kvmppc_mmu_pte_flush(vcpu, 0, 0);
- if (sregs->u.s.flags & KVM_SREGS_S_HIOR) {
- to_book3s(vcpu)->hior_sregs = true;
- to_book3s(vcpu)->hior = sregs->u.s.hior;
- }
-
return 0;
}
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/kvm_host.h>
-#include <linux/module.h>
#include <linux/vmalloc.h>
#include <linux/hrtimer.h>
#include <linux/fs.h>
case KVM_CAP_PPC_BOOKE_SREGS:
#else
case KVM_CAP_PPC_SEGSTATE:
- case KVM_CAP_PPC_HIOR:
case KVM_CAP_PPC_PAPR:
#endif
case KVM_CAP_PPC_UNSET_IRQ:
*
* Author: Anton Blanchard <anton@au.ibm.com>
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/compiler.h>
#include <linux/types.h>
#include <asm/checksum.h>
#include <linux/device.h> /* devres_*(), devm_ioremap_release() */
#include <linux/gfp.h>
#include <linux/io.h> /* ioremap_prot() */
-#include <linux/module.h> /* EXPORT_SYMBOL() */
+#include <linux/export.h> /* EXPORT_SYMBOL() */
/**
* devm_ioremap_prot - Managed ioremap_prot()
#include <linux/init.h>
#include <asm/cputable.h>
#include <asm/code-patching.h>
+#include <asm/page.h>
+#include <asm/sections.h>
struct fixup_entry {
}
}
+void do_final_fixups(void)
+{
+#if defined(CONFIG_PPC64) && defined(CONFIG_RELOCATABLE)
+ int *src, *dest;
+ unsigned long length;
+
+ if (PHYSICAL_START == 0)
+ return;
+
+ src = (int *)(KERNELBASE + PHYSICAL_START);
+ dest = (int *)KERNELBASE;
+ length = (__end_interrupts - _stext) / sizeof(int);
+
+ while (length--) {
+ patch_instruction(dest, *src);
+ src++;
+ dest++;
+ }
+#endif
+}
+
#ifdef CONFIG_FTR_FIXUP_SELFTEST
#define check(x) \
#include <linux/kernel.h>
#include <linux/spinlock.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/stringify.h>
#include <linux/smp.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/mm.h>
#include <linux/err.h>
#include <linux/slab.h>
case EFDNABS: ret = XA; break;
case EFDNEG: ret = XA; break;
case EFDSUB: ret = AB; break;
-
- default:
- printk(KERN_ERR "\nOoops! SPE instruction no type found.");
- printk(KERN_ERR "\ninst code: %08lx\n", speinsn);
}
return ret;
type = insn_type(speinsn);
if (type == NOTYPE)
- return -ENOSYS;
+ goto illegal;
func = speinsn & 0x7ff;
fc = (speinsn >> 21) & 0x1f;
__FPU_FPSCR = mfspr(SPRN_SPEFSCR);
-#ifdef DEBUG
- printk("speinsn:%08lx spefscr:%08lx\n", speinsn, __FPU_FPSCR);
- printk("vc: %08x %08x\n", vc.wp[0], vc.wp[1]);
- printk("va: %08x %08x\n", va.wp[0], va.wp[1]);
- printk("vb: %08x %08x\n", vb.wp[0], vb.wp[1]);
-#endif
+ pr_debug("speinsn:%08lx spefscr:%08lx\n", speinsn, __FPU_FPSCR);
+ pr_debug("vc: %08x %08x\n", vc.wp[0], vc.wp[1]);
+ pr_debug("va: %08x %08x\n", va.wp[0], va.wp[1]);
+ pr_debug("vb: %08x %08x\n", vb.wp[0], vb.wp[1]);
switch (src) {
case SPFP: {
break;
}
-#ifdef DEBUG
- printk("SA: %ld %08lx %ld (%ld)\n", SA_s, SA_f, SA_e, SA_c);
- printk("SB: %ld %08lx %ld (%ld)\n", SB_s, SB_f, SB_e, SB_c);
-#endif
+ pr_debug("SA: %ld %08lx %ld (%ld)\n", SA_s, SA_f, SA_e, SA_c);
+ pr_debug("SB: %ld %08lx %ld (%ld)\n", SB_s, SB_f, SB_e, SB_c);
switch (func) {
case EFSABS:
FP_DECL_D(DB);
FP_CLEAR_EXCEPTIONS;
FP_UNPACK_DP(DB, vb.dp);
-#ifdef DEBUG
- printk("DB: %ld %08lx %08lx %ld (%ld)\n",
+
+ pr_debug("DB: %ld %08lx %08lx %ld (%ld)\n",
DB_s, DB_f1, DB_f0, DB_e, DB_c);
-#endif
+
FP_CONV(S, D, 1, 2, SR, DB);
goto pack_s;
}
break;
pack_s:
-#ifdef DEBUG
- printk("SR: %ld %08lx %ld (%ld)\n", SR_s, SR_f, SR_e, SR_c);
-#endif
+ pr_debug("SR: %ld %08lx %ld (%ld)\n", SR_s, SR_f, SR_e, SR_c);
+
FP_PACK_SP(vc.wp + 1, SR);
goto update_regs;
break;
}
-#ifdef DEBUG
- printk("DA: %ld %08lx %08lx %ld (%ld)\n",
+ pr_debug("DA: %ld %08lx %08lx %ld (%ld)\n",
DA_s, DA_f1, DA_f0, DA_e, DA_c);
- printk("DB: %ld %08lx %08lx %ld (%ld)\n",
+ pr_debug("DB: %ld %08lx %08lx %ld (%ld)\n",
DB_s, DB_f1, DB_f0, DB_e, DB_c);
-#endif
switch (func) {
case EFDABS:
FP_DECL_S(SB);
FP_CLEAR_EXCEPTIONS;
FP_UNPACK_SP(SB, vb.wp + 1);
-#ifdef DEBUG
- printk("SB: %ld %08lx %ld (%ld)\n",
+
+ pr_debug("SB: %ld %08lx %ld (%ld)\n",
SB_s, SB_f, SB_e, SB_c);
-#endif
+
FP_CONV(D, S, 2, 1, DR, SB);
goto pack_d;
}
break;
pack_d:
-#ifdef DEBUG
- printk("DR: %ld %08lx %08lx %ld (%ld)\n",
+ pr_debug("DR: %ld %08lx %08lx %ld (%ld)\n",
DR_s, DR_f1, DR_f0, DR_e, DR_c);
-#endif
+
FP_PACK_DP(vc.dp, DR);
goto update_regs;
break;
}
-#ifdef DEBUG
- printk("SA0: %ld %08lx %ld (%ld)\n", SA0_s, SA0_f, SA0_e, SA0_c);
- printk("SA1: %ld %08lx %ld (%ld)\n", SA1_s, SA1_f, SA1_e, SA1_c);
- printk("SB0: %ld %08lx %ld (%ld)\n", SB0_s, SB0_f, SB0_e, SB0_c);
- printk("SB1: %ld %08lx %ld (%ld)\n", SB1_s, SB1_f, SB1_e, SB1_c);
-#endif
+ pr_debug("SA0: %ld %08lx %ld (%ld)\n",
+ SA0_s, SA0_f, SA0_e, SA0_c);
+ pr_debug("SA1: %ld %08lx %ld (%ld)\n",
+ SA1_s, SA1_f, SA1_e, SA1_c);
+ pr_debug("SB0: %ld %08lx %ld (%ld)\n",
+ SB0_s, SB0_f, SB0_e, SB0_c);
+ pr_debug("SB1: %ld %08lx %ld (%ld)\n",
+ SB1_s, SB1_f, SB1_e, SB1_c);
switch (func) {
case EVFSABS:
break;
pack_vs:
-#ifdef DEBUG
- printk("SR0: %ld %08lx %ld (%ld)\n", SR0_s, SR0_f, SR0_e, SR0_c);
- printk("SR1: %ld %08lx %ld (%ld)\n", SR1_s, SR1_f, SR1_e, SR1_c);
-#endif
+ pr_debug("SR0: %ld %08lx %ld (%ld)\n",
+ SR0_s, SR0_f, SR0_e, SR0_c);
+ pr_debug("SR1: %ld %08lx %ld (%ld)\n",
+ SR1_s, SR1_f, SR1_e, SR1_c);
+
FP_PACK_SP(vc.wp, SR0);
FP_PACK_SP(vc.wp + 1, SR1);
goto update_regs;
current->thread.evr[fc] = vc.wp[0];
regs->gpr[fc] = vc.wp[1];
-#ifdef DEBUG
- printk("ccr = %08lx\n", regs->ccr);
- printk("cur exceptions = %08x spefscr = %08lx\n",
+ pr_debug("ccr = %08lx\n", regs->ccr);
+ pr_debug("cur exceptions = %08x spefscr = %08lx\n",
FP_CUR_EXCEPTIONS, __FPU_FPSCR);
- printk("vc: %08x %08x\n", vc.wp[0], vc.wp[1]);
- printk("va: %08x %08x\n", va.wp[0], va.wp[1]);
- printk("vb: %08x %08x\n", vb.wp[0], vb.wp[1]);
-#endif
+ pr_debug("vc: %08x %08x\n", vc.wp[0], vc.wp[1]);
+ pr_debug("va: %08x %08x\n", va.wp[0], va.wp[1]);
+ pr_debug("vb: %08x %08x\n", vb.wp[0], vb.wp[1]);
return 0;
if (have_e500_cpu_a005_erratum) {
/* according to e500 cpu a005 erratum, reissue efp inst */
regs->nip -= 4;
-#ifdef DEBUG
- printk(KERN_DEBUG "re-issue efp inst: %08lx\n", speinsn);
-#endif
+ pr_debug("re-issue efp inst: %08lx\n", speinsn);
return 0;
}
type = insn_type(speinsn & 0x7ff);
if (type == XCR) return -ENOSYS;
+ __FPU_FPSCR = mfspr(SPRN_SPEFSCR);
+ pr_debug("speinsn:%08lx spefscr:%08lx\n", speinsn, __FPU_FPSCR);
+
+ /* No need to round if the result is exact */
+ if (!(__FPU_FPSCR & FP_EX_INEXACT))
+ return 0;
+
fc = (speinsn >> 21) & 0x1f;
s_lo = regs->gpr[fc] & SIGN_BIT_S;
s_hi = current->thread.evr[fc] & SIGN_BIT_S;
fgpr.wp[0] = current->thread.evr[fc];
fgpr.wp[1] = regs->gpr[fc];
- __FPU_FPSCR = mfspr(SPRN_SPEFSCR);
+ pr_debug("round fgpr: %08x %08x\n", fgpr.wp[0], fgpr.wp[1]);
switch ((speinsn >> 5) & 0x7) {
/* Since SPE instructions on E500 core can handle round to nearest
current->thread.evr[fc] = fgpr.wp[0];
regs->gpr[fc] = fgpr.wp[1];
+ pr_debug(" to fgpr: %08x %08x\n", fgpr.wp[0], fgpr.wp[1]);
+
return 0;
}
ifeq ($(CONFIG_HUGETLB_PAGE),y)
obj-y += hugetlbpage.o
obj-$(CONFIG_PPC_STD_MMU_64) += hugetlbpage-hash64.o
+obj-$(CONFIG_PPC_BOOK3E_MMU) += hugetlbpage-book3e.o
endif
obj-$(CONFIG_PPC_SUBPAGE_PROT) += subpage-prot.o
obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o
#include <linux/types.h>
#include <linux/highmem.h>
#include <linux/dma-mapping.h>
+#include <linux/export.h>
#include <asm/tlbflush.h>
/*
* Set up a variable-size TLB entry (tlbcam). The parameters are not checked;
- * in particular size must be a power of 4 between 4k and 256M (or 1G, for cpus
- * that support extended page sizes). Note that while some cpus support a
- * page size of 4G, we don't allow its use here.
+ * in particular size must be a power of 4 between 4k and the max supported by
+ * an implementation; max may further be limited by what can be represented in
+ * an unsigned long (for example, 32-bit implementations cannot support a 4GB
+ * size).
*/
static void settlbcam(int index, unsigned long virt, phys_addr_t phys,
unsigned long size, unsigned long flags, unsigned int pid)
{
- unsigned int tsize, lz;
+ unsigned int tsize;
- asm (PPC_CNTLZL "%0,%1" : "=r" (lz) : "r" (size));
- tsize = 21 - lz;
+ tsize = __ilog2(size) - 10;
#ifdef CONFIG_SMP
if ((flags & _PAGE_NO_CACHE) == 0)
loadcam_entry(index);
}
+unsigned long calc_cam_sz(unsigned long ram, unsigned long virt,
+ phys_addr_t phys)
+{
+ unsigned int camsize = __ilog2(ram) & ~1U;
+ unsigned int align = __ffs(virt | phys) & ~1U;
+ unsigned long max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xf;
+
+ /* Convert (4^max) kB to (2^max) bytes */
+ max_cam = max_cam * 2 + 10;
+
+ if (camsize > align)
+ camsize = align;
+ if (camsize > max_cam)
+ camsize = max_cam;
+
+ return 1UL << camsize;
+}
+
unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx)
{
int i;
unsigned long virt = PAGE_OFFSET;
phys_addr_t phys = memstart_addr;
unsigned long amount_mapped = 0;
- unsigned long max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xf;
-
- /* Convert (4^max) kB to (2^max) bytes */
- max_cam = max_cam * 2 + 10;
/* Calculate CAM values */
for (i = 0; ram && i < max_cam_idx; i++) {
- unsigned int camsize = __ilog2(ram) & ~1U;
- unsigned int align = __ffs(virt | phys) & ~1U;
unsigned long cam_sz;
- if (camsize > align)
- camsize = align;
- if (camsize > max_cam)
- camsize = max_cam;
-
- cam_sz = 1UL << camsize;
+ cam_sz = calc_cam_sz(ram, virt, phys);
settlbcam(i, virt, phys, cam_sz, PAGE_KERNEL_X, 0);
ram -= cam_sz;
#include <linux/proc_fs.h>
#include <linux/stat.h>
#include <linux/sysctl.h>
+#include <linux/export.h>
#include <linux/ctype.h>
#include <linux/cache.h>
#include <linux/init.h>
int mmu_highuser_ssize = MMU_SEGSIZE_256M;
u16 mmu_slb_size = 64;
EXPORT_SYMBOL_GPL(mmu_slb_size);
-#ifdef CONFIG_HUGETLB_PAGE
-unsigned int HPAGE_SHIFT;
-#endif
#ifdef CONFIG_PPC_64K_PAGES
int mmu_ci_restrictions;
#endif
}
#ifdef CONFIG_MEMORY_HOTPLUG
-void create_section_mapping(unsigned long start, unsigned long end)
+int create_section_mapping(unsigned long start, unsigned long end)
{
- BUG_ON(htab_bolt_mapping(start, end, __pa(start),
+ return htab_bolt_mapping(start, end, __pa(start),
pgprot_val(PAGE_KERNEL), mmu_linear_psize,
- mmu_kernel_ssize));
+ mmu_kernel_ssize);
}
int remove_section_mapping(unsigned long start, unsigned long end)
--- /dev/null
+/*
+ * PPC Huge TLB Page Support for Book3E MMU
+ *
+ * Copyright (C) 2009 David Gibson, IBM Corporation.
+ * Copyright (C) 2011 Becky Bruce, Freescale Semiconductor
+ *
+ */
+#include <linux/mm.h>
+#include <linux/hugetlb.h>
+
+static inline int mmu_get_tsize(int psize)
+{
+ return mmu_psize_defs[psize].enc;
+}
+
+static inline int book3e_tlb_exists(unsigned long ea, unsigned long pid)
+{
+ int found = 0;
+
+ mtspr(SPRN_MAS6, pid << 16);
+ if (mmu_has_feature(MMU_FTR_USE_TLBRSRV)) {
+ asm volatile(
+ "li %0,0\n"
+ "tlbsx. 0,%1\n"
+ "bne 1f\n"
+ "li %0,1\n"
+ "1:\n"
+ : "=&r"(found) : "r"(ea));
+ } else {
+ asm volatile(
+ "tlbsx 0,%1\n"
+ "mfspr %0,0x271\n"
+ "srwi %0,%0,31\n"
+ : "=&r"(found) : "r"(ea));
+ }
+
+ return found;
+}
+
+void book3e_hugetlb_preload(struct mm_struct *mm, unsigned long ea, pte_t pte)
+{
+ unsigned long mas1, mas2;
+ u64 mas7_3;
+ unsigned long psize, tsize, shift;
+ unsigned long flags;
+
+#ifdef CONFIG_PPC_FSL_BOOK3E
+ int index, lz, ncams;
+ struct vm_area_struct *vma;
+#endif
+
+ if (unlikely(is_kernel_addr(ea)))
+ return;
+
+#ifdef CONFIG_PPC_MM_SLICES
+ psize = mmu_get_tsize(get_slice_psize(mm, ea));
+ tsize = mmu_get_psize(psize);
+ shift = mmu_psize_defs[psize].shift;
+#else
+ vma = find_vma(mm, ea);
+ psize = vma_mmu_pagesize(vma); /* returns actual size in bytes */
+ asm (PPC_CNTLZL "%0,%1" : "=r" (lz) : "r" (psize));
+ shift = 31 - lz;
+ tsize = 21 - lz;
+#endif
+
+ /*
+ * We can't be interrupted while we're setting up the MAS
+ * regusters or after we've confirmed that no tlb exists.
+ */
+ local_irq_save(flags);
+
+ if (unlikely(book3e_tlb_exists(ea, mm->context.id))) {
+ local_irq_restore(flags);
+ return;
+ }
+
+#ifdef CONFIG_PPC_FSL_BOOK3E
+ ncams = mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY;
+
+ /* We have to use the CAM(TLB1) on FSL parts for hugepages */
+ index = __get_cpu_var(next_tlbcam_idx);
+ mtspr(SPRN_MAS0, MAS0_ESEL(index) | MAS0_TLBSEL(1));
+
+ /* Just round-robin the entries and wrap when we hit the end */
+ if (unlikely(index == ncams - 1))
+ __get_cpu_var(next_tlbcam_idx) = tlbcam_index;
+ else
+ __get_cpu_var(next_tlbcam_idx)++;
+#endif
+ mas1 = MAS1_VALID | MAS1_TID(mm->context.id) | MAS1_TSIZE(tsize);
+ mas2 = ea & ~((1UL << shift) - 1);
+ mas2 |= (pte_val(pte) >> PTE_WIMGE_SHIFT) & MAS2_WIMGE_MASK;
+ mas7_3 = (u64)pte_pfn(pte) << PAGE_SHIFT;
+ mas7_3 |= (pte_val(pte) >> PTE_BAP_SHIFT) & MAS3_BAP_MASK;
+ if (!pte_dirty(pte))
+ mas7_3 &= ~(MAS3_SW|MAS3_UW);
+
+ mtspr(SPRN_MAS1, mas1);
+ mtspr(SPRN_MAS2, mas2);
+
+ if (mmu_has_feature(MMU_FTR_USE_PAIRED_MAS)) {
+ mtspr(SPRN_MAS7_MAS3, mas7_3);
+ } else {
+ mtspr(SPRN_MAS7, upper_32_bits(mas7_3));
+ mtspr(SPRN_MAS3, lower_32_bits(mas7_3));
+ }
+
+ asm volatile ("tlbwe");
+
+ local_irq_restore(flags);
+}
+
+void flush_hugetlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
+{
+ struct hstate *hstate = hstate_file(vma->vm_file);
+ unsigned long tsize = huge_page_shift(hstate) - 10;
+
+ __flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr, tsize, 0);
+
+}
/*
- * PPC64 (POWER4) Huge TLB Page Support for Kernel.
+ * PPC Huge TLB Page Support for Kernel.
*
* Copyright (C) 2003 David Gibson, IBM Corporation.
+ * Copyright (C) 2011 Becky Bruce, Freescale Semiconductor
*
* Based on the IA-32 version:
* Copyright (C) 2002, Rohit Seth <rohit.seth@intel.com>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/hugetlb.h>
+#include <linux/of_fdt.h>
+#include <linux/memblock.h>
+#include <linux/bootmem.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <asm/tlb.h>
+#include <asm/setup.h>
#define PAGE_SHIFT_64K 16
#define PAGE_SHIFT_16M 24
#define PAGE_SHIFT_16G 34
-#define MAX_NUMBER_GPAGES 1024
+unsigned int HPAGE_SHIFT;
-/* Tracks the 16G pages after the device tree is scanned and before the
- * huge_boot_pages list is ready. */
-static unsigned long gpage_freearray[MAX_NUMBER_GPAGES];
+/*
+ * Tracks gpages after the device tree is scanned and before the
+ * huge_boot_pages list is ready. On 64-bit implementations, this is
+ * just used to track 16G pages and so is a single array. 32-bit
+ * implementations may have more than one gpage size due to limitations
+ * of the memory allocators, so we need multiple arrays
+ */
+#ifdef CONFIG_PPC64
+#define MAX_NUMBER_GPAGES 1024
+static u64 gpage_freearray[MAX_NUMBER_GPAGES];
static unsigned nr_gpages;
-
-/* Flag to mark huge PD pointers. This means pmd_bad() and pud_bad()
- * will choke on pointers to hugepte tables, which is handy for
- * catching screwups early. */
+#else
+#define MAX_NUMBER_GPAGES 128
+struct psize_gpages {
+ u64 gpage_list[MAX_NUMBER_GPAGES];
+ unsigned int nr_gpages;
+};
+static struct psize_gpages gpage_freearray[MMU_PAGE_COUNT];
+#endif
static inline int shift_to_mmu_psize(unsigned int shift)
{
#define hugepd_none(hpd) ((hpd).pd == 0)
-static inline pte_t *hugepd_page(hugepd_t hpd)
-{
- BUG_ON(!hugepd_ok(hpd));
- return (pte_t *)((hpd.pd & ~HUGEPD_SHIFT_MASK) | 0xc000000000000000);
-}
-
-static inline unsigned int hugepd_shift(hugepd_t hpd)
-{
- return hpd.pd & HUGEPD_SHIFT_MASK;
-}
-
-static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr, unsigned pdshift)
-{
- unsigned long idx = (addr & ((1UL << pdshift) - 1)) >> hugepd_shift(*hpdp);
- pte_t *dir = hugepd_page(*hpdp);
-
- return dir + idx;
-}
-
pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea, unsigned *shift)
{
pgd_t *pg;
if (is_hugepd(pm))
hpdp = (hugepd_t *)pm;
else if (!pmd_none(*pm)) {
- return pte_offset_map(pm, ea);
+ return pte_offset_kernel(pm, ea);
}
}
}
static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
unsigned long address, unsigned pdshift, unsigned pshift)
{
- pte_t *new = kmem_cache_zalloc(PGT_CACHE(pdshift - pshift),
- GFP_KERNEL|__GFP_REPEAT);
+ struct kmem_cache *cachep;
+ pte_t *new;
+
+#ifdef CONFIG_PPC64
+ cachep = PGT_CACHE(pdshift - pshift);
+#else
+ int i;
+ int num_hugepd = 1 << (pshift - pdshift);
+ cachep = hugepte_cache;
+#endif
+
+ new = kmem_cache_zalloc(cachep, GFP_KERNEL|__GFP_REPEAT);
BUG_ON(pshift > HUGEPD_SHIFT_MASK);
BUG_ON((unsigned long)new & HUGEPD_SHIFT_MASK);
return -ENOMEM;
spin_lock(&mm->page_table_lock);
+#ifdef CONFIG_PPC64
if (!hugepd_none(*hpdp))
- kmem_cache_free(PGT_CACHE(pdshift - pshift), new);
+ kmem_cache_free(cachep, new);
else
- hpdp->pd = ((unsigned long)new & ~0x8000000000000000) | pshift;
+ hpdp->pd = ((unsigned long)new & ~PD_HUGE) | pshift;
+#else
+ /*
+ * We have multiple higher-level entries that point to the same
+ * actual pte location. Fill in each as we go and backtrack on error.
+ * We need all of these so the DTLB pgtable walk code can find the
+ * right higher-level entry without knowing if it's a hugepage or not.
+ */
+ for (i = 0; i < num_hugepd; i++, hpdp++) {
+ if (unlikely(!hugepd_none(*hpdp)))
+ break;
+ else
+ hpdp->pd = ((unsigned long)new & ~PD_HUGE) | pshift;
+ }
+ /* If we bailed from the for loop early, an error occurred, clean up */
+ if (i < num_hugepd) {
+ for (i = i - 1 ; i >= 0; i--, hpdp--)
+ hpdp->pd = 0;
+ kmem_cache_free(cachep, new);
+ }
+#endif
spin_unlock(&mm->page_table_lock);
return 0;
}
return hugepte_offset(hpdp, addr, pdshift);
}
+#ifdef CONFIG_PPC32
/* Build list of addresses of gigantic pages. This function is used in early
* boot before the buddy or bootmem allocator is setup.
*/
-void add_gpage(unsigned long addr, unsigned long page_size,
- unsigned long number_of_pages)
+void add_gpage(u64 addr, u64 page_size, unsigned long number_of_pages)
+{
+ unsigned int idx = shift_to_mmu_psize(__ffs(page_size));
+ int i;
+
+ if (addr == 0)
+ return;
+
+ gpage_freearray[idx].nr_gpages = number_of_pages;
+
+ for (i = 0; i < number_of_pages; i++) {
+ gpage_freearray[idx].gpage_list[i] = addr;
+ addr += page_size;
+ }
+}
+
+/*
+ * Moves the gigantic page addresses from the temporary list to the
+ * huge_boot_pages list.
+ */
+int alloc_bootmem_huge_page(struct hstate *hstate)
+{
+ struct huge_bootmem_page *m;
+ int idx = shift_to_mmu_psize(hstate->order + PAGE_SHIFT);
+ int nr_gpages = gpage_freearray[idx].nr_gpages;
+
+ if (nr_gpages == 0)
+ return 0;
+
+#ifdef CONFIG_HIGHMEM
+ /*
+ * If gpages can be in highmem we can't use the trick of storing the
+ * data structure in the page; allocate space for this
+ */
+ m = alloc_bootmem(sizeof(struct huge_bootmem_page));
+ m->phys = gpage_freearray[idx].gpage_list[--nr_gpages];
+#else
+ m = phys_to_virt(gpage_freearray[idx].gpage_list[--nr_gpages]);
+#endif
+
+ list_add(&m->list, &huge_boot_pages);
+ gpage_freearray[idx].nr_gpages = nr_gpages;
+ gpage_freearray[idx].gpage_list[nr_gpages] = 0;
+ m->hstate = hstate;
+
+ return 1;
+}
+/*
+ * Scan the command line hugepagesz= options for gigantic pages; store those in
+ * a list that we use to allocate the memory once all options are parsed.
+ */
+
+unsigned long gpage_npages[MMU_PAGE_COUNT];
+
+static int __init do_gpage_early_setup(char *param, char *val)
+{
+ static phys_addr_t size;
+ unsigned long npages;
+
+ /*
+ * The hugepagesz and hugepages cmdline options are interleaved. We
+ * use the size variable to keep track of whether or not this was done
+ * properly and skip over instances where it is incorrect. Other
+ * command-line parsing code will issue warnings, so we don't need to.
+ *
+ */
+ if ((strcmp(param, "default_hugepagesz") == 0) ||
+ (strcmp(param, "hugepagesz") == 0)) {
+ size = memparse(val, NULL);
+ } else if (strcmp(param, "hugepages") == 0) {
+ if (size != 0) {
+ if (sscanf(val, "%lu", &npages) <= 0)
+ npages = 0;
+ gpage_npages[shift_to_mmu_psize(__ffs(size))] = npages;
+ size = 0;
+ }
+ }
+ return 0;
+}
+
+
+/*
+ * This function allocates physical space for pages that are larger than the
+ * buddy allocator can handle. We want to allocate these in highmem because
+ * the amount of lowmem is limited. This means that this function MUST be
+ * called before lowmem_end_addr is set up in MMU_init() in order for the lmb
+ * allocate to grab highmem.
+ */
+void __init reserve_hugetlb_gpages(void)
+{
+ static __initdata char cmdline[COMMAND_LINE_SIZE];
+ phys_addr_t size, base;
+ int i;
+
+ strlcpy(cmdline, boot_command_line, COMMAND_LINE_SIZE);
+ parse_args("hugetlb gpages", cmdline, NULL, 0, &do_gpage_early_setup);
+
+ /*
+ * Walk gpage list in reverse, allocating larger page sizes first.
+ * Skip over unsupported sizes, or sizes that have 0 gpages allocated.
+ * When we reach the point in the list where pages are no longer
+ * considered gpages, we're done.
+ */
+ for (i = MMU_PAGE_COUNT-1; i >= 0; i--) {
+ if (mmu_psize_defs[i].shift == 0 || gpage_npages[i] == 0)
+ continue;
+ else if (mmu_psize_to_shift(i) < (MAX_ORDER + PAGE_SHIFT))
+ break;
+
+ size = (phys_addr_t)(1ULL << mmu_psize_to_shift(i));
+ base = memblock_alloc_base(size * gpage_npages[i], size,
+ MEMBLOCK_ALLOC_ANYWHERE);
+ add_gpage(base, size, gpage_npages[i]);
+ }
+}
+
+#else /* PPC64 */
+
+/* Build list of addresses of gigantic pages. This function is used in early
+ * boot before the buddy or bootmem allocator is setup.
+ */
+void add_gpage(u64 addr, u64 page_size, unsigned long number_of_pages)
{
if (!addr)
return;
m->hstate = hstate;
return 1;
}
+#endif
int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep)
{
return 0;
}
+#ifdef CONFIG_PPC32
+#define HUGEPD_FREELIST_SIZE \
+ ((PAGE_SIZE - sizeof(struct hugepd_freelist)) / sizeof(pte_t))
+
+struct hugepd_freelist {
+ struct rcu_head rcu;
+ unsigned int index;
+ void *ptes[0];
+};
+
+static DEFINE_PER_CPU(struct hugepd_freelist *, hugepd_freelist_cur);
+
+static void hugepd_free_rcu_callback(struct rcu_head *head)
+{
+ struct hugepd_freelist *batch =
+ container_of(head, struct hugepd_freelist, rcu);
+ unsigned int i;
+
+ for (i = 0; i < batch->index; i++)
+ kmem_cache_free(hugepte_cache, batch->ptes[i]);
+
+ free_page((unsigned long)batch);
+}
+
+static void hugepd_free(struct mmu_gather *tlb, void *hugepte)
+{
+ struct hugepd_freelist **batchp;
+
+ batchp = &__get_cpu_var(hugepd_freelist_cur);
+
+ if (atomic_read(&tlb->mm->mm_users) < 2 ||
+ cpumask_equal(mm_cpumask(tlb->mm),
+ cpumask_of(smp_processor_id()))) {
+ kmem_cache_free(hugepte_cache, hugepte);
+ return;
+ }
+
+ if (*batchp == NULL) {
+ *batchp = (struct hugepd_freelist *)__get_free_page(GFP_ATOMIC);
+ (*batchp)->index = 0;
+ }
+
+ (*batchp)->ptes[(*batchp)->index++] = hugepte;
+ if ((*batchp)->index == HUGEPD_FREELIST_SIZE) {
+ call_rcu_sched(&(*batchp)->rcu, hugepd_free_rcu_callback);
+ *batchp = NULL;
+ }
+}
+#endif
+
static void free_hugepd_range(struct mmu_gather *tlb, hugepd_t *hpdp, int pdshift,
unsigned long start, unsigned long end,
unsigned long floor, unsigned long ceiling)
{
pte_t *hugepte = hugepd_page(*hpdp);
- unsigned shift = hugepd_shift(*hpdp);
+ int i;
+
unsigned long pdmask = ~((1UL << pdshift) - 1);
+ unsigned int num_hugepd = 1;
+
+#ifdef CONFIG_PPC64
+ unsigned int shift = hugepd_shift(*hpdp);
+#else
+ /* Note: On 32-bit the hpdp may be the first of several */
+ num_hugepd = (1 << (hugepd_shift(*hpdp) - pdshift));
+#endif
start &= pdmask;
if (start < floor)
if (end - 1 > ceiling - 1)
return;
- hpdp->pd = 0;
+ for (i = 0; i < num_hugepd; i++, hpdp++)
+ hpdp->pd = 0;
+
tlb->need_flush = 1;
+#ifdef CONFIG_PPC64
pgtable_free_tlb(tlb, hugepte, pdshift - shift);
+#else
+ hugepd_free(tlb, hugepte);
+#endif
}
static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
* too.
*/
- pgd = pgd_offset(tlb->mm, addr);
do {
next = pgd_addr_end(addr, end);
+ pgd = pgd_offset(tlb->mm, addr);
if (!is_hugepd(pgd)) {
if (pgd_none_or_clear_bad(pgd))
continue;
hugetlb_free_pud_range(tlb, pgd, addr, next, floor, ceiling);
} else {
+#ifdef CONFIG_PPC32
+ /*
+ * Increment next by the size of the huge mapping since
+ * on 32-bit there may be more than one entry at the pgd
+ * level for a single hugepage, but all of them point to
+ * the same kmem cache that holds the hugepte.
+ */
+ next = addr + (1 << hugepd_shift(*(hugepd_t *)pgd));
+#endif
free_hugepd_range(tlb, (hugepd_t *)pgd, PGDIR_SHIFT,
addr, next, floor, ceiling);
}
- } while (pgd++, addr = next, addr != end);
+ } while (addr = next, addr != end);
}
struct page *
unsigned long len, unsigned long pgoff,
unsigned long flags)
{
+#ifdef CONFIG_PPC_MM_SLICES
struct hstate *hstate = hstate_file(file);
int mmu_psize = shift_to_mmu_psize(huge_page_shift(hstate));
return slice_get_unmapped_area(addr, len, flags, mmu_psize, 1, 0);
+#else
+ return get_unmapped_area(file, addr, len, pgoff, flags);
+#endif
}
unsigned long vma_mmu_pagesize(struct vm_area_struct *vma)
{
+#ifdef CONFIG_PPC_MM_SLICES
unsigned int psize = get_slice_psize(vma->vm_mm, vma->vm_start);
return 1UL << mmu_psize_to_shift(psize);
+#else
+ if (!is_vm_hugetlb_page(vma))
+ return PAGE_SIZE;
+
+ return huge_page_size(hstate_vma(vma));
+#endif
+}
+
+static inline bool is_power_of_4(unsigned long x)
+{
+ if (is_power_of_2(x))
+ return (__ilog2(x) % 2) ? false : true;
+ return false;
}
static int __init add_huge_page_size(unsigned long long size)
/* Check that it is a page size supported by the hardware and
* that it fits within pagetable and slice limits. */
+#ifdef CONFIG_PPC_FSL_BOOK3E
+ if ((size < PAGE_SIZE) || !is_power_of_4(size))
+ return -EINVAL;
+#else
if (!is_power_of_2(size)
|| (shift > SLICE_HIGH_SHIFT) || (shift <= PAGE_SHIFT))
return -EINVAL;
+#endif
if ((mmu_psize = shift_to_mmu_psize(shift)) < 0)
return -EINVAL;
}
__setup("hugepagesz=", hugepage_setup_sz);
+#ifdef CONFIG_FSL_BOOKE
+struct kmem_cache *hugepte_cache;
+static int __init hugetlbpage_init(void)
+{
+ int psize;
+
+ for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
+ unsigned shift;
+
+ if (!mmu_psize_defs[psize].shift)
+ continue;
+
+ shift = mmu_psize_to_shift(psize);
+
+ /* Don't treat normal page sizes as huge... */
+ if (shift != PAGE_SHIFT)
+ if (add_huge_page_size(1ULL << shift) < 0)
+ continue;
+ }
+
+ /*
+ * Create a kmem cache for hugeptes. The bottom bits in the pte have
+ * size information encoded in them, so align them to allow this
+ */
+ hugepte_cache = kmem_cache_create("hugepte-cache", sizeof(pte_t),
+ HUGEPD_SHIFT_MASK + 1, 0, NULL);
+ if (hugepte_cache == NULL)
+ panic("%s: Unable to create kmem cache for hugeptes\n",
+ __func__);
+
+ /* Default hpage size = 4M */
+ if (mmu_psize_defs[MMU_PAGE_4M].shift)
+ HPAGE_SHIFT = mmu_psize_defs[MMU_PAGE_4M].shift;
+ else
+ panic("%s: Unable to set default huge page size\n", __func__);
+
+
+ return 0;
+}
+#else
static int __init hugetlbpage_init(void)
{
int psize;
return 0;
}
-
+#endif
module_init(hugetlbpage_init);
void flush_dcache_icache_hugepage(struct page *page)
{
int i;
+ void *start;
BUG_ON(!PageCompound(page));
- for (i = 0; i < (1UL << compound_order(page)); i++)
- __flush_dcache_icache(page_address(page+i));
+ for (i = 0; i < (1UL << compound_order(page)); i++) {
+ if (!PageHighMem(page)) {
+ __flush_dcache_icache(page_address(page+i));
+ } else {
+ start = kmap_atomic(page+i, KM_PPC_SYNC_ICACHE);
+ __flush_dcache_icache(start);
+ kunmap_atomic(start, KM_PPC_SYNC_ICACHE);
+ }
+ }
}
#include <linux/pagemap.h>
#include <linux/memblock.h>
#include <linux/gfp.h>
+#include <linux/slab.h>
+#include <linux/hugetlb.h>
#include <asm/pgalloc.h>
#include <asm/prom.h>
#include <asm/tlb.h>
#include <asm/sections.h>
#include <asm/system.h>
+#include <asm/hugetlb.h>
#include "mmu_decl.h"
/* parse args from command line */
MMU_setup();
+ /*
+ * Reserve gigantic pages for hugetlb. This MUST occur before
+ * lowmem_end_addr is initialized below.
+ */
+ reserve_hugetlb_gpages();
+
if (memblock.memory.cnt > 1) {
#ifndef CONFIG_WII
memblock.memory.cnt = 1;
*
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/suspend.h>
#include <linux/memblock.h>
#include <linux/hugetlb.h>
+#include <linux/slab.h>
#include <asm/pgalloc.h>
#include <asm/prom.h>
pgdata = NODE_DATA(nid);
start = (unsigned long)__va(start);
- create_section_mapping(start, start + size);
+ if (create_section_mapping(start, start + size))
+ return -EINVAL;
/* this should work for most non-highmem platforms */
zone = pgdata->node_zones;
return;
hash_preload(vma->vm_mm, address, access, trap);
#endif /* CONFIG_PPC_STD_MMU */
+#if (defined(CONFIG_PPC_BOOK3E_64) || defined(CONFIG_PPC_FSL_BOOK3E)) \
+ && defined(CONFIG_HUGETLB_PAGE)
+ if (is_vm_hugetlb_page(vma))
+ book3e_hugetlb_preload(vma->vm_mm, address, *ptep);
+#endif
+}
+
+/*
+ * System memory should not be in /proc/iomem but various tools expect it
+ * (eg kdump).
+ */
+static int add_system_ram_resources(void)
+{
+ struct memblock_region *reg;
+
+ for_each_memblock(memory, reg) {
+ struct resource *res;
+ unsigned long base = reg->base;
+ unsigned long size = reg->size;
+
+ res = kzalloc(sizeof(struct resource), GFP_KERNEL);
+ WARN_ON(!res);
+
+ if (res) {
+ res->name = "System RAM";
+ res->start = base;
+ res->end = base + size - 1;
+ res->flags = IORESOURCE_MEM;
+ WARN_ON(request_resource(&iomem_resource, res) < 0);
+ }
+ }
+
+ return 0;
}
+subsys_initcall(add_system_ram_resources);
#include <linux/mm.h>
#include <linux/init.h>
+#include <linux/export.h>
#include <asm/mmu_context.h>
#include <asm/tlbflush.h>
#include <linux/mm.h>
#include <linux/spinlock.h>
#include <linux/idr.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/gfp.h>
#include <linux/slab.h>
if (!mm || !acop)
return -EINVAL;
- /* We need to make sure mm_users doesn't change */
- down_read(&mm->mmap_sem);
+ /* The page_table_lock ensures mm_users won't change under us */
+ spin_lock(&mm->page_table_lock);
spin_lock(mm->context.cop_lockp);
if (mm->context.cop_pid == COP_PID_NONE) {
out:
spin_unlock(mm->context.cop_lockp);
- up_read(&mm->mmap_sem);
+ spin_unlock(&mm->page_table_lock);
return ret;
}
if (WARN_ON_ONCE(!mm))
return;
- /* We need to make sure mm_users doesn't change */
- down_read(&mm->mmap_sem);
+ /* The page_table_lock ensures mm_users won't change under us */
+ spin_lock(&mm->page_table_lock);
spin_lock(mm->context.cop_lockp);
mm->context.acop &= ~acop;
}
spin_unlock(mm->context.cop_lockp);
- up_read(&mm->mmap_sem);
+ spin_unlock(&mm->page_table_lock);
}
EXPORT_SYMBOL_GPL(drop_cop);
mm->context.id = MMU_NO_CONTEXT;
mm->context.active = 0;
+#ifdef CONFIG_PPC_MM_SLICES
+ if (slice_mm_new_context(mm))
+ slice_set_user_psize(mm, mmu_virtual_psize);
+#endif
+
return 0;
}
#elif defined(CONFIG_PPC_FSL_BOOK3E)
extern unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx);
+extern unsigned long calc_cam_sz(unsigned long ram, unsigned long virt,
+ phys_addr_t phys);
#ifdef CONFIG_PPC32
extern void MMU_init_hw(void);
extern unsigned long mmu_mapin_ram(unsigned long top);
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/mmzone.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/nodemask.h>
#include <linux/cpu.h>
#include <linux/notifier.h>
struct device_node *root;
const char *vec5;
- root = of_find_node_by_path("/rtas");
+ if (firmware_has_feature(FW_FEATURE_OPAL))
+ root = of_find_node_by_path("/ibm,opal");
+ else
+ root = of_find_node_by_path("/rtas");
if (!root)
root = of_find_node_by_path("/");
#define VEC5_AFFINITY_BYTE 5
#define VEC5_AFFINITY 0x80
- chosen = of_find_node_by_path("/chosen");
- if (chosen) {
- vec5 = of_get_property(chosen, "ibm,architecture-vec-5", NULL);
- if (vec5 && (vec5[VEC5_AFFINITY_BYTE] & VEC5_AFFINITY)) {
- dbg("Using form 1 affinity\n");
- form1_affinity = 1;
+
+ if (firmware_has_feature(FW_FEATURE_OPAL))
+ form1_affinity = 1;
+ else {
+ chosen = of_find_node_by_path("/chosen");
+ if (chosen) {
+ vec5 = of_get_property(chosen,
+ "ibm,architecture-vec-5", NULL);
+ if (vec5 && (vec5[VEC5_AFFINITY_BYTE] &
+ VEC5_AFFINITY)) {
+ dbg("Using form 1 affinity\n");
+ form1_affinity = 1;
+ }
}
}
static int __init parse_numa_properties(void)
{
- struct device_node *cpu = NULL;
- struct device_node *memory = NULL;
+ struct device_node *memory;
int default_nid = 0;
unsigned long i;
* each node to be onlined must have NODE_DATA etc backing it.
*/
for_each_present_cpu(i) {
+ struct device_node *cpu;
int nid;
cpu = of_get_cpu_node(i, NULL);
}
get_n_mem_cells(&n_mem_addr_cells, &n_mem_size_cells);
- memory = NULL;
- while ((memory = of_find_node_by_type(memory, "memory")) != NULL) {
+
+ for_each_node_by_type(memory, "memory") {
unsigned long start;
unsigned long size;
int nid;
}
/*
- * Now do the same thing for each MEMBLOCK listed in the ibm,dynamic-memory
- * property in the ibm,dynamic-reconfiguration-memory node.
+ * Now do the same thing for each MEMBLOCK listed in the
+ * ibm,dynamic-memory property in the
+ * ibm,dynamic-reconfiguration-memory node.
*/
memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
if (memory)
*/
int hot_add_node_scn_to_nid(unsigned long scn_addr)
{
- struct device_node *memory = NULL;
+ struct device_node *memory;
int nid = -1;
- while ((memory = of_find_node_by_type(memory, "memory")) != NULL) {
+ for_each_node_by_type(memory, "memory") {
unsigned long start, size;
int ranges;
const unsigned int *memcell_buf;
break;
}
- of_node_put(memory);
if (nid >= 0)
break;
}
+ of_node_put(memory);
+
return nid;
}
#include <linux/init.h>
#include <linux/percpu.h>
#include <linux/hardirq.h>
+#include <linux/hugetlb.h>
#include <asm/pgalloc.h>
#include <asm/tlbflush.h>
#include <asm/tlb.h>
entry = set_access_flags_filter(entry, vma, dirty);
changed = !pte_same(*(ptep), entry);
if (changed) {
- if (!(vma->vm_flags & VM_HUGETLB))
+ if (!is_vm_hugetlb_page(vma))
assert_pte_locked(vma->vm_mm, address);
__ptep_set_access_flags(ptep, entry);
flush_tlb_page_nohash(vma, address);
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
+#include <linux/export.h>
#include <linux/types.h>
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/pagemap.h>
#include <linux/err.h>
#include <linux/spinlock.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <asm/mman.h>
#include <asm/mmu.h>
#include <asm/spu.h>
#include <linux/init.h>
#include <linux/highmem.h>
#include <linux/pagemap.h>
+#include <linux/export.h>
#include <asm/tlbflush.h>
#include <asm/tlb.h>
rldicl r11,r16,64-VPTE_PGD_SHIFT,64-PGD_INDEX_SIZE-3
clrrdi r10,r11,3
ldx r15,r10,r15
- cmpldi cr0,r15,0
- beq virt_page_table_tlb_miss_fault
+ cmpdi cr0,r15,0
+ bge virt_page_table_tlb_miss_fault
#ifndef CONFIG_PPC_64K_PAGES
/* Get to PUD entry */
rldicl r11,r16,64-VPTE_PUD_SHIFT,64-PUD_INDEX_SIZE-3
clrrdi r10,r11,3
ldx r15,r10,r15
- cmpldi cr0,r15,0
- beq virt_page_table_tlb_miss_fault
+ cmpdi cr0,r15,0
+ bge virt_page_table_tlb_miss_fault
#endif /* CONFIG_PPC_64K_PAGES */
/* Get to PMD entry */
rldicl r11,r16,64-VPTE_PMD_SHIFT,64-PMD_INDEX_SIZE-3
clrrdi r10,r11,3
ldx r15,r10,r15
- cmpldi cr0,r15,0
- beq virt_page_table_tlb_miss_fault
+ cmpdi cr0,r15,0
+ bge virt_page_table_tlb_miss_fault
/* Ok, we're all right, we can now create a kernel translation for
* a 4K or 64K page from r16 -> r15.
rldicl r11,r16,64-(PGDIR_SHIFT-3),64-PGD_INDEX_SIZE-3
clrrdi r10,r11,3
ldx r15,r10,r15
- cmpldi cr0,r15,0
- beq htw_tlb_miss_fault
+ cmpdi cr0,r15,0
+ bge htw_tlb_miss_fault
#ifndef CONFIG_PPC_64K_PAGES
/* Get to PUD entry */
rldicl r11,r16,64-(PUD_SHIFT-3),64-PUD_INDEX_SIZE-3
clrrdi r10,r11,3
ldx r15,r10,r15
- cmpldi cr0,r15,0
- beq htw_tlb_miss_fault
+ cmpdi cr0,r15,0
+ bge htw_tlb_miss_fault
#endif /* CONFIG_PPC_64K_PAGES */
/* Get to PMD entry */
rldicl r11,r16,64-(PMD_SHIFT-3),64-PMD_INDEX_SIZE-3
clrrdi r10,r11,3
ldx r15,r10,r15
- cmpldi cr0,r15,0
- beq htw_tlb_miss_fault
+ cmpdi cr0,r15,0
+ bge htw_tlb_miss_fault
/* Ok, we're all right, we can now create an indirect entry for
* a 1M or 256M page.
*/
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/highmem.h>
#include <linux/spinlock.h>
#include <linux/memblock.h>
#include <linux/of_fdt.h>
+#include <linux/hugetlb.h>
#include <asm/tlbflush.h>
#include <asm/tlb.h>
#include <asm/code-patching.h>
+#include <asm/hugetlb.h>
#include "mmu_decl.h"
-#ifdef CONFIG_PPC_BOOK3E
+/*
+ * This struct lists the sw-supported page sizes. The hardawre MMU may support
+ * other sizes not listed here. The .ind field is only used on MMUs that have
+ * indirect page table entries.
+ */
+#ifdef CONFIG_PPC_BOOK3E_MMU
+#ifdef CONFIG_FSL_BOOKE
+struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = {
+ [MMU_PAGE_4K] = {
+ .shift = 12,
+ .enc = BOOK3E_PAGESZ_4K,
+ },
+ [MMU_PAGE_4M] = {
+ .shift = 22,
+ .enc = BOOK3E_PAGESZ_4M,
+ },
+ [MMU_PAGE_16M] = {
+ .shift = 24,
+ .enc = BOOK3E_PAGESZ_16M,
+ },
+ [MMU_PAGE_64M] = {
+ .shift = 26,
+ .enc = BOOK3E_PAGESZ_64M,
+ },
+ [MMU_PAGE_256M] = {
+ .shift = 28,
+ .enc = BOOK3E_PAGESZ_256M,
+ },
+ [MMU_PAGE_1G] = {
+ .shift = 30,
+ .enc = BOOK3E_PAGESZ_1GB,
+ },
+};
+#else
struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = {
[MMU_PAGE_4K] = {
.shift = 12,
.enc = BOOK3E_PAGESZ_1GB,
},
};
+#endif /* CONFIG_FSL_BOOKE */
+
static inline int mmu_get_tsize(int psize)
{
return mmu_psize_defs[psize].enc;
/* This isn't used on !Book3E for now */
return 0;
}
-#endif
+#endif /* CONFIG_PPC_BOOK3E_MMU */
/* The variables below are currently only used on 64-bit Book3E
* though this will probably be made common with other nohash
void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
{
+#ifdef CONFIG_HUGETLB_PAGE
+ if (is_vm_hugetlb_page(vma))
+ flush_hugetlb_page(vma, vmaddr);
+#endif
+
__flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr,
mmu_get_tsize(mmu_virtual_psize), 0);
}
void setup_initial_memory_limit(phys_addr_t first_memblock_base,
phys_addr_t first_memblock_size)
{
- /* On Embedded 64-bit, we adjust the RMA size to match
+ /* On non-FSL Embedded 64-bit, we adjust the RMA size to match
* the bolted TLB entry. We know for now that only 1G
* entries are supported though that may eventually
- * change. We crop it to the size of the first MEMBLOCK to
+ * change.
+ *
+ * on FSL Embedded 64-bit, we adjust the RMA size to match the
+ * first bolted TLB entry size. We still limit max to 1G even if
+ * the TLB could cover more. This is due to what the early init
+ * code is setup to do.
+ *
+ * We crop it to the size of the first MEMBLOCK to
* avoid going over total available memory just in case...
*/
- ppc64_rma_size = min_t(u64, first_memblock_size, 0x40000000);
+#ifdef CONFIG_PPC_FSL_BOOK3E
+ if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) {
+ unsigned long linear_sz;
+ linear_sz = calc_cam_sz(first_memblock_size, PAGE_OFFSET,
+ first_memblock_base);
+ ppc64_rma_size = min_t(u64, linear_sz, 0x40000000);
+ } else
+#endif
+ ppc64_rma_size = min_t(u64, first_memblock_size, 0x40000000);
/* Finally limit subsequent allocations */
memblock_set_current_limit(first_memblock_base + ppc64_rma_size);
help
This option enables support for the EP405/EP405PC boards.
-config HCU4
- bool "Hcu4"
- depends on 40x
- default n
- select 405GPR
- help
- This option enables support for the Nestal Maschinen HCU4 board.
-
config HOTFOOT
bool "Hotfoot"
depends on 40x
help
This option enables the simple PowerPC 40x platform support.
-# 40x specific CPU modules, selected based on the board above.
-config NP405H
- bool
- #depends on ASH
-
# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
config 403GCX
bool
-obj-$(CONFIG_HCU4) += hcu4.o
obj-$(CONFIG_WALNUT) += walnut.o
obj-$(CONFIG_XILINX_VIRTEX_GENERIC_BOARD) += virtex.o
obj-$(CONFIG_EP405) += ep405.o
+++ /dev/null
-/*
- * Architecture- / platform-specific boot-time initialization code for
- * IBM PowerPC 4xx based boards. Adapted from original
- * code by Gary Thomas, Cort Dougan <cort@fsmlabs.com>, and Dan Malek
- * <dan@net4x.com>.
- *
- * Copyright(c) 1999-2000 Grant Erickson <grant@lcse.umn.edu>
- *
- * Rewritten and ported to the merged powerpc tree:
- * Copyright 2007 IBM Corporation
- * Josh Boyer <jwboyer@linux.vnet.ibm.com>
- *
- * 2002 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <linux/of_platform.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/time.h>
-#include <asm/uic.h>
-#include <asm/ppc4xx.h>
-
-static __initdata struct of_device_id hcu4_of_bus[] = {
- { .compatible = "ibm,plb3", },
- { .compatible = "ibm,opb", },
- { .compatible = "ibm,ebc", },
- {},
-};
-
-static int __init hcu4_device_probe(void)
-{
- of_platform_bus_probe(NULL, hcu4_of_bus, NULL);
- return 0;
-}
-machine_device_initcall(hcu4, hcu4_device_probe);
-
-static int __init hcu4_probe(void)
-{
- unsigned long root = of_get_flat_dt_root();
-
- if (!of_flat_dt_is_compatible(root, "netstal,hcu4"))
- return 0;
-
- return 1;
-}
-
-define_machine(hcu4) {
- .name = "HCU4",
- .probe = hcu4_probe,
- .progress = udbg_progress,
- .init_IRQ = uic_init_tree,
- .get_irq = uic_get_irq,
- .restart = ppc4xx_reset_system,
- .calibrate_decr = generic_calibrate_decr,
-};
#include <linux/of_gpio.h>
#include <linux/of_i2c.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <asm/machdep.h>
#include <asm/prom.h>
select PPC_CLOCK
select PPC_PCI_CHOICE
select FSL_PCI if PCI
+ select ARCH_WANT_OPTIONAL_GPIOLIB
config MPC5121_ADS
bool "Freescale MPC5121E ADS"
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
+#include <linux/module.h>
#include <linux/string.h>
#include <linux/clk.h>
#include <linux/mutex.h>
/* list of the supported boards */
static const char *board[] __initdata = {
+ "anon,charon",
"intercontrol,digsy-mtc",
"manroland,mucmc52",
"manroland,uc101",
#include <linux/spinlock.h>
#include <linux/of_platform.h>
#include <linux/of_gpio.h>
+#include <linux/export.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/mpc52xx.h>
#include <linux/watchdog.h>
#include <linux/miscdevice.h>
#include <linux/uaccess.h>
+#include <linux/module.h>
#include <asm/div64.h>
#include <asm/mpc52xx.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/spinlock.h>
+#include <linux/module.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/mpc52xx.h>
};
static __initdata struct cpm_pin km82xx_pins[] = {
+ /* SMC1 */
+ {2, 4, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {2, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
/* SMC2 */
{0, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
}
cpm2_smc_clk_setup(CPM_CLK_SMC2, CPM_BRG8);
+ cpm2_smc_clk_setup(CPM_CLK_SMC1, CPM_BRG7);
cpm2_clk_setup(CPM_CLK_SCC1, CPM_CLK11, CPM_CLK_RX);
cpm2_clk_setup(CPM_CLK_SCC1, CPM_CLK11, CPM_CLK_TX);
cpm2_clk_setup(CPM_CLK_SCC3, CPM_CLK5, CPM_CLK_RTX);
endif
-# used for usb
+# used for usb & gpio
config PPC_MPC831x
bool
+ select ARCH_WANT_OPTIONAL_GPIOLIB
# used for math-emu
config PPC_MPC832x
bool
-# used for usb
+# used for usb & gpio
config PPC_MPC834x
bool
+ select ARCH_WANT_OPTIONAL_GPIOLIB
-# used for usb
+# used for usb & gpio
config PPC_MPC837x
bool
+ select ARCH_WANT_OPTIONAL_GPIOLIB
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/slab.h>
+#include <linux/kthread.h>
+#include <linux/reboot.h>
#include <asm/prom.h>
#include <asm/machdep.h>
*/
#define MCU_REG_CTRL 0x20
#define MCU_CTRL_POFF 0x40
+#define MCU_CTRL_BTN 0x80
#define MCU_NUM_GPIO 2
static struct mcu *glob_mcu;
+struct task_struct *shutdown_thread;
+static int shutdown_thread_fn(void *data)
+{
+ int ret;
+ struct mcu *mcu = glob_mcu;
+
+ while (!kthread_should_stop()) {
+ ret = i2c_smbus_read_byte_data(mcu->client, MCU_REG_CTRL);
+ if (ret < 0)
+ pr_err("MCU status reg read failed.\n");
+ mcu->reg_ctrl = ret;
+
+
+ if (mcu->reg_ctrl & MCU_CTRL_BTN) {
+ i2c_smbus_write_byte_data(mcu->client, MCU_REG_CTRL,
+ mcu->reg_ctrl & ~MCU_CTRL_BTN);
+
+ ctrl_alt_del();
+ }
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(HZ);
+ }
+
+ return 0;
+}
+
+static ssize_t show_status(struct device *d,
+ struct device_attribute *attr, char *buf)
+{
+ int ret;
+ struct mcu *mcu = glob_mcu;
+
+ ret = i2c_smbus_read_byte_data(mcu->client, MCU_REG_CTRL);
+ if (ret < 0)
+ return -ENODEV;
+ mcu->reg_ctrl = ret;
+
+ return sprintf(buf, "%02x\n", ret);
+}
+static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
+
static void mcu_power_off(void)
{
struct mcu *mcu = glob_mcu;
pr_info("Sending power-off request to the MCU...\n");
mutex_lock(&mcu->lock);
- i2c_smbus_write_byte_data(glob_mcu->client, MCU_REG_CTRL,
+ i2c_smbus_write_byte_data(mcu->client, MCU_REG_CTRL,
mcu->reg_ctrl | MCU_CTRL_POFF);
mutex_unlock(&mcu->lock);
}
dev_info(&client->dev, "will provide power-off service\n");
}
+ if (device_create_file(&client->dev, &dev_attr_status))
+ dev_err(&client->dev,
+ "couldn't create device file for status\n");
+
+ shutdown_thread = kthread_run(shutdown_thread_fn, NULL,
+ "mcu-i2c-shdn");
+
return 0;
err:
kfree(mcu);
struct mcu *mcu = i2c_get_clientdata(client);
int ret;
+ kthread_stop(shutdown_thread);
+
+ device_remove_file(&client->dev, &dev_attr_status);
+
if (glob_mcu == mcu) {
ppc_md.power_off = NULL;
glob_mcu = NULL;
#include <linux/suspend.h>
#include <linux/fsl_devices.h>
#include <linux/of_platform.h>
+#include <linux/export.h>
#include <asm/reg.h>
#include <asm/io.h>
help
This option enables support for the Wind River SBC8560 board
-config P2040_RDB
- bool "Freescale P2040 RDB"
+config P2041_RDB
+ bool "Freescale P2041 RDB"
select DEFAULT_UIMAGE
select PPC_E500MC
select PHYS_64BIT
select SWIOTLB
- select MPC8xxx_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ select GPIO_MPC8XXX
select HAS_RAPIDIO
select PPC_EPAPR_HV_PIC
help
- This option enables support for the P2040 RDB board
+ This option enables support for the P2041 RDB board
config P3041_DS
bool "Freescale P3041 DS"
select PPC_E500MC
select PHYS_64BIT
select SWIOTLB
- select MPC8xxx_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ select GPIO_MPC8XXX
select HAS_RAPIDIO
select PPC_EPAPR_HV_PIC
help
This option enables support for the P3041 DS board
+config P3060_QDS
+ bool "Freescale P3060 QDS"
+ select DEFAULT_UIMAGE
+ select PPC_E500MC
+ select PHYS_64BIT
+ select SWIOTLB
+ select MPC8xxx_GPIO
+ select HAS_RAPIDIO
+ select PPC_EPAPR_HV_PIC
+ help
+ This option enables support for the P3060 QDS board
+
config P4080_DS
bool "Freescale P4080 DS"
select DEFAULT_UIMAGE
select PPC_E500MC
select PHYS_64BIT
select SWIOTLB
- select MPC8xxx_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ select GPIO_MPC8XXX
select HAS_RAPIDIO
select PPC_EPAPR_HV_PIC
help
select PPC_E500MC
select PHYS_64BIT
select SWIOTLB
- select MPC8xxx_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ select GPIO_MPC8XXX
select HAS_RAPIDIO
select PPC_EPAPR_HV_PIC
help
obj-$(CONFIG_P1010_RDB) += p1010rdb.o
obj-$(CONFIG_P1022_DS) += p1022_ds.o
obj-$(CONFIG_P1023_RDS) += p1023_rds.o
-obj-$(CONFIG_P2040_RDB) += p2040_rdb.o corenet_ds.o
+obj-$(CONFIG_P2041_RDB) += p2041_rdb.o corenet_ds.o
obj-$(CONFIG_P3041_DS) += p3041_ds.o corenet_ds.o
+obj-$(CONFIG_P3060_QDS) += p3060_qds.o corenet_ds.o
obj-$(CONFIG_P4080_DS) += p4080_ds.o corenet_ds.o
obj-$(CONFIG_P5020_DS) += p5020_ds.o corenet_ds.o
obj-$(CONFIG_STX_GP3) += stx_gp3.o
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/initrd.h>
-#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/fsl_devices.h>
#include <linux/of_platform.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/initrd.h>
-#include <linux/module.h>
#include <linux/fsl_devices.h>
#include <linux/of_platform.h>
#include <linux/of_device.h>
*/
static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port)
{
- struct device_node *pixis_node;
+ struct device_node *np;
void __iomem *pixis;
u8 __iomem *brdcfg1;
- pixis_node = of_find_compatible_node(NULL, NULL, "fsl,p1022ds-pixis");
- if (!pixis_node) {
+ np = of_find_compatible_node(NULL, NULL, "fsl,p1022ds-fpga");
+ if (!np)
+ /* older device trees used "fsl,p1022ds-pixis" */
+ np = of_find_compatible_node(NULL, NULL, "fsl,p1022ds-pixis");
+ if (!np) {
pr_err("p1022ds: missing ngPIXIS node\n");
return;
}
- pixis = of_iomap(pixis_node, 0);
+ pixis = of_iomap(np, 0);
if (!pixis) {
pr_err("p1022ds: could not map ngPIXIS registers\n");
return;
+++ /dev/null
-/*
- * P2040 RDB Setup
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/phy.h>
-
-#include <asm/system.h>
-#include <asm/time.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <mm/mmu_decl.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/mpic.h>
-
-#include <linux/of_platform.h>
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
-#include <asm/ehv_pic.h>
-
-#include "corenet_ds.h"
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init p2040_rdb_probe(void)
-{
- unsigned long root = of_get_flat_dt_root();
-#ifdef CONFIG_SMP
- extern struct smp_ops_t smp_85xx_ops;
-#endif
-
- if (of_flat_dt_is_compatible(root, "fsl,P2040RDB"))
- return 1;
-
- /* Check if we're running under the Freescale hypervisor */
- if (of_flat_dt_is_compatible(root, "fsl,P2040RDB-hv")) {
- ppc_md.init_IRQ = ehv_pic_init;
- ppc_md.get_irq = ehv_pic_get_irq;
- ppc_md.restart = fsl_hv_restart;
- ppc_md.power_off = fsl_hv_halt;
- ppc_md.halt = fsl_hv_halt;
-#ifdef CONFIG_SMP
- /*
- * Disable the timebase sync operations because we can't write
- * to the timebase registers under the hypervisor.
- */
- smp_85xx_ops.give_timebase = NULL;
- smp_85xx_ops.take_timebase = NULL;
-#endif
- return 1;
- }
-
- return 0;
-}
-
-define_machine(p2040_rdb) {
- .name = "P2040 RDB",
- .probe = p2040_rdb_probe,
- .setup_arch = corenet_ds_setup_arch,
- .init_IRQ = corenet_ds_pic_init,
-#ifdef CONFIG_PCI
- .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
-#endif
- .get_irq = mpic_get_coreint_irq,
- .restart = fsl_rstcr_restart,
- .calibrate_decr = generic_calibrate_decr,
- .progress = udbg_progress,
- .power_save = e500_idle,
-};
-
-machine_device_initcall(p2040_rdb, corenet_ds_publish_devices);
-
-#ifdef CONFIG_SWIOTLB
-machine_arch_initcall(p2040_rdb, swiotlb_setup_bus_notifier);
-#endif
--- /dev/null
+/*
+ * P2041 RDB Setup
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/phy.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+
+#include <linux/of_platform.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include <asm/ehv_pic.h>
+
+#include "corenet_ds.h"
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init p2041_rdb_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+#ifdef CONFIG_SMP
+ extern struct smp_ops_t smp_85xx_ops;
+#endif
+
+ if (of_flat_dt_is_compatible(root, "fsl,P2041RDB"))
+ return 1;
+
+ /* Check if we're running under the Freescale hypervisor */
+ if (of_flat_dt_is_compatible(root, "fsl,P2041RDB-hv")) {
+ ppc_md.init_IRQ = ehv_pic_init;
+ ppc_md.get_irq = ehv_pic_get_irq;
+ ppc_md.restart = fsl_hv_restart;
+ ppc_md.power_off = fsl_hv_halt;
+ ppc_md.halt = fsl_hv_halt;
+#ifdef CONFIG_SMP
+ /*
+ * Disable the timebase sync operations because we can't write
+ * to the timebase registers under the hypervisor.
+ */
+ smp_85xx_ops.give_timebase = NULL;
+ smp_85xx_ops.take_timebase = NULL;
+#endif
+ return 1;
+ }
+
+ return 0;
+}
+
+define_machine(p2041_rdb) {
+ .name = "P2041 RDB",
+ .probe = p2041_rdb_probe,
+ .setup_arch = corenet_ds_setup_arch,
+ .init_IRQ = corenet_ds_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+ .get_irq = mpic_get_coreint_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+ .power_save = e500_idle,
+};
+
+machine_device_initcall(p2041_rdb, corenet_ds_publish_devices);
+
+#ifdef CONFIG_SWIOTLB
+machine_arch_initcall(p2041_rdb, swiotlb_setup_bus_notifier);
+#endif
--- /dev/null
+/*
+ * P3060 QDS Setup
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/phy.h>
+#include <asm/machdep.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+#include <linux/of_platform.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include <asm/ehv_pic.h>
+#include "corenet_ds.h"
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init p3060_qds_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+#ifdef CONFIG_SMP
+ extern struct smp_ops_t smp_85xx_ops;
+#endif
+
+ if (of_flat_dt_is_compatible(root, "fsl,P3060QDS"))
+ return 1;
+
+ /* Check if we're running under the Freescale hypervisor */
+ if (of_flat_dt_is_compatible(root, "fsl,P3060QDS-hv")) {
+ ppc_md.init_IRQ = ehv_pic_init;
+ ppc_md.get_irq = ehv_pic_get_irq;
+ ppc_md.restart = fsl_hv_restart;
+ ppc_md.power_off = fsl_hv_halt;
+ ppc_md.halt = fsl_hv_halt;
+#ifdef CONFIG_SMP
+ /*
+ * Disable the timebase sync operations because we can't write
+ * to the timebase registers under the hypervisor.
+ */
+ smp_85xx_ops.give_timebase = NULL;
+ smp_85xx_ops.take_timebase = NULL;
+#endif
+ return 1;
+ }
+
+ return 0;
+}
+
+define_machine(p3060_qds) {
+ .name = "P3060 QDS",
+ .probe = p3060_qds_probe,
+ .setup_arch = corenet_ds_setup_arch,
+ .init_IRQ = corenet_ds_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+ .get_irq = mpic_get_coreint_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+ .power_save = e500_idle,
+};
+
+machine_device_initcall(p3060_qds, declare_of_platform_devices);
+
+#ifdef CONFIG_SWIOTLB
+machine_arch_initcall(p3060_qds, swiotlb_setup_bus_notifier);
+#endif
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/initrd.h>
-#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/fsl_devices.h>
#include <linux/of_platform.h>
of_address_to_resource(np, 0, &res);
- printk(KERN_INFO "sbc8560: Found BRSTCR at i/o 0x%x\n", res.start);
+ printk(KERN_INFO "sbc8560: Found BRSTCR at %pR\n", &res);
brstcr = ioremap(res.start, resource_size(&res));
if(!brstcr)
const u64 *cpu_rel_addr;
__iomem u32 *bptr_vaddr;
struct device_node *np;
- int n = 0;
+ int n = 0, hw_cpu = get_hard_smp_processor_id(nr);
int ioremappable;
- WARN_ON (nr < 0 || nr >= NR_CPUS);
+ WARN_ON(nr < 0 || nr >= NR_CPUS);
+ WARN_ON(hw_cpu < 0 || hw_cpu >= NR_CPUS);
pr_debug("smp_85xx_kick_cpu: kick CPU #%d\n", nr);
local_irq_save(flags);
- out_be32(bptr_vaddr + BOOT_ENTRY_PIR, nr);
+ out_be32(bptr_vaddr + BOOT_ENTRY_PIR, hw_cpu);
#ifdef CONFIG_PPC32
out_be32(bptr_vaddr + BOOT_ENTRY_ADDR_LOWER, __pa(__early_start));
(ulong)(bptr_vaddr + SIZE_BOOT_ENTRY));
/* Wait a bit for the CPU to ack. */
- while ((__secondary_hold_acknowledge != nr) && (++n < 1000))
+ while ((__secondary_hold_acknowledge != hw_cpu) && (++n < 1000))
mdelay(1);
#else
smp_generic_kick_cpu(nr);
if ( !timeout )
printk(KERN_ERR "Unable to bring down secondary cpu(s)");
- for (i = 0; i < num_cpus; i++)
+ for_each_online_cpu(i)
{
if ( i == smp_processor_id() ) continue;
mpic_reset_core(i);
* If left NULL, .message_pass defaults to
* smp_muxed_ipi_message_pass
*/
+ smp_85xx_ops.message_pass = NULL;
smp_85xx_ops.cause_ipi = doorbell_cause_ipi;
}
depends on 6xx
select FSL_SOC
select ALTIVEC
+ select ARCH_WANT_OPTIONAL_GPIOLIB
help
The Freescale E600 SoCs have 74xx cores.
#include <linux/of_gpio.h>
#include <linux/gpio.h>
#include <linux/slab.h>
+#include <linux/module.h>
#define GEF_GPIO_DIRECT 0x00
#define GEF_GPIO_IN 0x04
*/
#include <linux/init.h>
-#include <linux/module.h>
#include <linux/param.h>
#include <linux/string.h>
#include <linux/ioport.h>
menu "Platform support"
+source "arch/powerpc/platforms/powernv/Kconfig"
source "arch/powerpc/platforms/pseries/Kconfig"
source "arch/powerpc/platforms/iseries/Kconfig"
source "arch/powerpc/platforms/chrp/Kconfig"
source "arch/powerpc/sysdev/bestcomm/Kconfig"
-config MPC8xxx_GPIO
- bool "MPC512x/MPC8xxx GPIO support"
- depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \
- FSL_SOC_BOOKE || PPC_86xx
- select GENERIC_GPIO
- select ARCH_REQUIRE_GPIOLIB
- help
- Say Y here if you're going to use hardware that connects to the
- MPC512x/831x/834x/837x/8572/8610 GPIOs.
-
config SIMPLE_GPIO
bool "Support for simple, memory-mapped GPIO controllers"
depends on PPC
on-board peripherals.
config MCU_MPC8349EMITX
- tristate "MPC8349E-mITX MCU driver"
- depends on I2C && PPC_83xx
+ bool "MPC8349E-mITX MCU driver"
+ depends on I2C=y && PPC_83xx
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
help
bool "Server processors"
select PPC_FPU
select PPC_HAVE_PMU_SUPPORT
+ select SYS_SUPPORTS_HUGETLBFS
config PPC_BOOK3E_64
bool "Embedded processors"
config FSL_BOOKE
bool
depends on (E200 || E500) && PPC32
+ select SYS_SUPPORTS_HUGETLBFS if PHYS_64BIT
default y
# this is for common code between PPC32 & PPC64 FSL BOOKE
def_bool y
depends on !PPC_STD_MMU
-config PPC_MMU_NOHASH_32
- def_bool y
- depends on PPC_MMU_NOHASH && PPC32
-
-config PPC_MMU_NOHASH_64
- def_bool y
- depends on PPC_MMU_NOHASH && PPC64
-
config PPC_BOOK3E_MMU
def_bool y
depends on FSL_BOOKE || PPC_BOOK3E
config PPC_MM_SLICES
bool
- default y if HUGETLB_PAGE || (PPC_STD_MMU_64 && PPC_64K_PAGES)
+ default y if (PPC64 && HUGETLB_PAGE) || (PPC_STD_MMU_64 && PPC_64K_PAGES)
default n
config VIRT_CPU_ACCOUNTING
obj-$(CONFIG_PPC_83xx) += 83xx/
obj-$(CONFIG_FSL_SOC_BOOKE) += 85xx/
obj-$(CONFIG_PPC_86xx) += 86xx/
+obj-$(CONFIG_PPC_POWERNV) += powernv/
obj-$(CONFIG_PPC_PSERIES) += pseries/
obj-$(CONFIG_PPC_ISERIES) += iseries/
obj-$(CONFIG_PPC_MAPLE) += maple/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/msi.h>
+#include <linux/export.h>
#include <linux/of_platform.h>
#include <linux/debugfs.h>
#include <linux/slab.h>
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/rtc.h>
}
ev->virq = virq;
- rc = request_irq(virq, ev->handler, IRQF_DISABLED,
+ rc = request_irq(virq, ev->handler, 0,
ev->typecode, NULL);
if (rc != 0) {
printk(KERN_ERR "Beat: failed to request virtual IRQ"
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
-#include <linux/module.h>
-
#include <asm/types.h>
#include <asm/spu.h>
#include <asm/spu_priv1.h>
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#ifndef BEAT_HCALL
+#include <linux/string.h>
#include "beat_syscall.h"
/* defined in hvCall.S */
*/
#include <linux/cpufreq.h>
+#include <linux/module.h>
#include <linux/of_platform.h>
#include <asm/machdep.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/timer.h>
+#include <linux/module.h>
#include <linux/of_platform.h>
#include <asm/processor.h>
*/
#include <linux/input.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
#include <asm/pmi.h>
#include <asm/prom.h>
#include <linux/percpu.h>
#include <linux/types.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
oirq.size);
if (request_irq(virq, pciex_handle_internal_irq,
- IRQF_DISABLED, "pciex", (void *)phb)) {
+ 0, "pciex", (void *)phb)) {
pr_err("PCIEXC:Failed to request irq\n");
goto error;
}
#include <linux/cpu.h>
#include <linux/sched.h>
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/mm.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/cpufreq.h>
#include <linux/sched.h>
+#include <linux/module.h>
#include <linux/timer.h>
#include <linux/workqueue.h>
#include <linux/atomic.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/percpu.h>
#include <linux/types.h>
#include <linux/ioport.h>
IIC_IRQ_IOEX_ATI | (iommu->nid << IIC_IRQ_NODE_SHIFT));
BUG_ON(virq == NO_IRQ);
- ret = request_irq(virq, ioc_interrupt, IRQF_DISABLED,
- iommu->name, iommu);
+ ret = request_irq(virq, ioc_interrupt, 0, iommu->name, iommu);
BUG_ON(ret);
/* set the IOC segment table origin register (and turn on the iommu) */
}
__setup("iommu_fixed=", setup_iommu_fixed);
+static u64 cell_dma_get_required_mask(struct device *dev)
+{
+ struct dma_map_ops *dma_ops;
+
+ if (!dev->dma_mask)
+ return 0;
+
+ if (!iommu_fixed_disabled &&
+ cell_iommu_get_fixed_address(dev) != OF_BAD_ADDR)
+ return DMA_BIT_MASK(64);
+
+ dma_ops = get_dma_ops(dev);
+ if (dma_ops->get_required_mask)
+ return dma_ops->get_required_mask(dev);
+
+ WARN_ONCE(1, "no get_required_mask in %p ops", dma_ops);
+
+ return DMA_BIT_MASK(64);
+}
+
static int __init cell_iommu_init(void)
{
struct device_node *np;
/* Setup various ppc_md. callbacks */
ppc_md.pci_dma_dev_setup = cell_pci_dma_dev_setup;
+ ppc_md.dma_get_required_mask = cell_dma_get_required_mask;
ppc_md.tce_build = tce_build_cell;
ppc_md.tce_free = tce_free_cell;
#include <linux/interrupt.h>
#include <linux/types.h>
+#include <linux/export.h>
#include <asm/io.h>
#include <asm/irq_regs.h>
#include <asm/machdep.h>
}
rc = request_irq(irq, cbe_pm_irq,
- IRQF_DISABLED, "cbe-pmu-0", NULL);
+ 0, "cbe-pmu-0", NULL);
if (rc) {
printk("ERROR: Request for irq on node %d failed\n",
node);
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/export.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/console.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/stddef.h>
+#include <linux/export.h>
#include <linux/unistd.h>
#include <linux/user.h>
#include <linux/reboot.h>
#undef DEBUG
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/interrupt.h>
snprintf(spu->irq_c0, sizeof (spu->irq_c0), "spe%02d.0",
spu->number);
ret = request_irq(spu->irqs[0], spu_irq_class_0,
- IRQF_DISABLED,
- spu->irq_c0, spu);
+ 0, spu->irq_c0, spu);
if (ret)
goto bail0;
}
snprintf(spu->irq_c1, sizeof (spu->irq_c1), "spe%02d.1",
spu->number);
ret = request_irq(spu->irqs[1], spu_irq_class_1,
- IRQF_DISABLED,
- spu->irq_c1, spu);
+ 0, spu->irq_c1, spu);
if (ret)
goto bail1;
}
snprintf(spu->irq_c2, sizeof (spu->irq_c2), "spe%02d.2",
spu->number);
ret = request_irq(spu->irqs[2], spu_irq_class_2,
- IRQF_DISABLED,
- spu->irq_c2, spu);
+ 0, spu->irq_c2, spu);
if (ret)
goto bail2;
}
#undef DEBUG
#include <linux/kallsyms.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/syscalls.h>
#include <asm/spu.h>
*/
#include <linux/sched.h>
#include <linux/mm.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <asm/spu.h>
#include <asm/spu_csa.h>
#include <linux/interrupt.h>
#include <linux/list.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/ptrace.h>
#include <linux/wait.h>
#include <linux/mm.h>
#undef DEBUG
-#include <linux/module.h>
+#include <linux/export.h>
+#include <linux/notifier.h>
#include <asm/spu.h>
#include "spufs/spufs.h"
#include <linux/interrupt.h>
#include <linux/list.h>
-#include <linux/module.h>
#include <linux/ptrace.h>
#include <linux/wait.h>
#include <linux/mm.h>
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/module.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/mm.h>
-#include <linux/module.h>
#include <linux/slab.h>
#include <linux/atomic.h>
+#include <linux/sched.h>
#include <asm/spu.h>
#include <asm/spu_csa.h>
#include "spufs.h"
#include <linux/fs.h>
#include <linux/gfp.h>
#include <linux/list.h>
-#include <linux/module.h>
#include <linux/syscalls.h>
#include <asm/uaccess.h>
*/
#include <linux/sched.h>
#include <linux/mm.h>
-#include <linux/module.h>
#include <asm/spu.h>
#include <asm/spu_csa.h>
#include <linux/fs.h>
#include <linux/ioctl.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/pagemap.h>
#include <linux/poll.h>
#include <linux/ptrace.h>
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/module.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#undef DEBUG
-#include <linux/module.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/errno.h>
#include <linux/hardirq.h>
#include <linux/sched.h>
#include <linux/file.h>
#include <linux/fs.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/mount.h>
#include <linux/namei.h>
#include <linux/slab.h>
config MPC10X_OPENPIC
bool
-config MPC10X_STORE_GATHERING
- bool "Enable MPC10x store gathering"
- depends on MPC10X_BRIDGE
-
config GAMECUBE_COMMON
bool
#include <linux/tty.h>
#include <linux/serial_core.h>
#include <linux/of_platform.h>
+#include <linux/module.h>
#include <asm/system.h>
#include <asm/time.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/console.h>
+#include <linux/module.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/seq_file.h>
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <asm/iseries/hv_lp_config.h>
#include "it_lp_naca.h"
#include <linux/dma-mapping.h>
#include <linux/list.h>
#include <linux/pci.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <asm/iommu.h>
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <asm/hw_irq.h>
#include <asm/iseries/hv_call_sc.h>
*/
#include <linux/types.h>
#include <linux/threads.h>
-#include <linux/module.h>
#include <linux/bitops.h>
#include <asm/processor.h>
#include <asm/ptrace.h>
#include <linux/bootmem.h>
#include <linux/seq_file.h>
#include <linux/proc_fs.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <asm/system.h>
#include <asm/paca.h>
#include <linux/init.h>
#include <linux/completion.h>
#include <linux/delay.h>
+#include <linux/export.h>
#include <linux/proc_fs.h>
#include <linux/dma-mapping.h>
#include <linux/bcd.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/init.h>
-#include <linux/module.h>
#include <linux/pci.h>
#include <linux/of.h>
#include <linux/ratelimit.h>
#include <linux/smp.h>
#include <linux/param.h>
#include <linux/string.h>
+#include <linux/export.h>
#include <linux/seq_file.h>
#include <linux/kdev_t.h>
#include <linux/kexec.h>
#undef DEBUG
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/completion.h>
#include <linux/proc_fs.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <asm/firmware.h>
#include <asm/vio.h>
* Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/mm.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/cpufreq.h>
#include <linux/timer.h>
+#include <linux/module.h>
#include <asm/hw_irq.h>
#include <asm/io.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/of.h>
+#include <linux/sched.h>
#include <asm/pasemi_dma.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/console.h>
+#include <linux/export.h>
#include <linux/pci.h>
#include <linux/of_platform.h>
#include <linux/gfp.h>
#include <linux/adb.h>
#include <linux/pmu.h>
#include <linux/atomic.h>
+#include <linux/export.h>
#include <asm/prom.h>
#include <asm/backlight.h>
#include <linux/adb.h>
#include <linux/pmu.h>
#include <linux/ioport.h>
+#include <linux/export.h>
#include <linux/pci.h>
#include <asm/sections.h>
#include <asm/errno.h>
#include <linux/types.h>
#include <linux/sched.h>
#include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/adb.h>
#include <linux/pmu.h>
#include <linux/delay.h>
*
* Todo: - add support for the OF persistent properties
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/stddef.h>
#include <linux/string.h>
#include <linux/syscore_ops.h>
#include <linux/adb.h>
#include <linux/pmu.h>
-#include <linux/module.h>
#include <asm/sections.h>
#include <asm/io.h>
static struct irqaction gatwick_cascade_action = {
.handler = gatwick_action,
- .flags = IRQF_DISABLED,
.name = "cascade",
};
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
+#include <linux/export.h>
#include <linux/user.h>
#include <linux/tty.h>
#include <linux/string.h>
if (psurge_secondary_virq)
rc = request_irq(psurge_secondary_virq, psurge_ipi_intr,
- IRQF_DISABLED|IRQF_PERCPU, "IPI", NULL);
+ IRQF_PERCPU, "IPI", NULL);
if (rc)
pr_err("Failed to setup secondary cpu IPI\n");
static struct irqaction psurge_irqaction = {
.handler = psurge_ipi_intr,
- .flags = IRQF_DISABLED|IRQF_PERCPU,
+ .flags = IRQF_PERCPU,
.name = "primary IPI",
};
--- /dev/null
+config PPC_POWERNV
+ depends on PPC64 && PPC_BOOK3S
+ bool "IBM PowerNV (Non-Virtualized) platform support"
+ select PPC_NATIVE
+ select PPC_XICS
+ select PPC_ICP_NATIVE
+ select PPC_P7_NAP
+ select PPC_PCI_CHOICE if EMBEDDED
+ default y
+
+config PPC_POWERNV_RTAS
+ depends on PPC_POWERNV
+ bool "Support for RTAS based PowerNV platforms such as BML"
+ default y
+ select PPC_ICS_RTAS
+ select PPC_RTAS
--- /dev/null
+obj-y += setup.o opal-takeover.o opal-wrappers.o opal.o
+obj-y += opal-rtc.o opal-nvram.o
+
+obj-$(CONFIG_SMP) += smp.o
+obj-$(CONFIG_PCI) += pci.o pci-p5ioc2.o
--- /dev/null
+/*
+ * PowerNV nvram code.
+ *
+ * Copyright 2011 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define DEBUG
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of.h>
+
+#include <asm/opal.h>
+#include <asm/machdep.h>
+
+static unsigned int nvram_size;
+
+static ssize_t opal_nvram_size(void)
+{
+ return nvram_size;
+}
+
+static ssize_t opal_nvram_read(char *buf, size_t count, loff_t *index)
+{
+ s64 rc;
+ int off;
+
+ if (*index >= nvram_size)
+ return 0;
+ off = *index;
+ if ((off + count) > nvram_size)
+ count = nvram_size - off;
+ rc = opal_read_nvram(__pa(buf), count, off);
+ if (rc != OPAL_SUCCESS)
+ return -EIO;
+ *index += count;
+ return count;
+}
+
+static ssize_t opal_nvram_write(char *buf, size_t count, loff_t *index)
+{
+ s64 rc = OPAL_BUSY;
+ int off;
+
+ if (*index >= nvram_size)
+ return 0;
+ off = *index;
+ if ((off + count) > nvram_size)
+ count = nvram_size - off;
+
+ while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
+ rc = opal_write_nvram(__pa(buf), count, off);
+ if (rc == OPAL_BUSY_EVENT)
+ opal_poll_events(NULL);
+ }
+ *index += count;
+ return count;
+}
+
+void __init opal_nvram_init(void)
+{
+ struct device_node *np;
+ const u32 *nbytes_p;
+
+ np = of_find_compatible_node(NULL, NULL, "ibm,opal-nvram");
+ if (np == NULL)
+ return;
+
+ nbytes_p = of_get_property(np, "#bytes", NULL);
+ if (!nbytes_p) {
+ of_node_put(np);
+ return;
+ }
+ nvram_size = *nbytes_p;
+
+ printk(KERN_INFO "OPAL nvram setup, %u bytes\n", nvram_size);
+ of_node_put(np);
+
+ ppc_md.nvram_read = opal_nvram_read;
+ ppc_md.nvram_write = opal_nvram_write;
+ ppc_md.nvram_size = opal_nvram_size;
+}
+
--- /dev/null
+/*
+ * PowerNV Real Time Clock.
+ *
+ * Copyright 2011 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/time.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/delay.h>
+
+#include <asm/opal.h>
+#include <asm/firmware.h>
+
+static void opal_to_tm(u32 y_m_d, u64 h_m_s_ms, struct rtc_time *tm)
+{
+ tm->tm_year = ((bcd2bin(y_m_d >> 24) * 100) +
+ bcd2bin((y_m_d >> 16) & 0xff)) - 1900;
+ tm->tm_mon = bcd2bin((y_m_d >> 8) & 0xff) - 1;
+ tm->tm_mday = bcd2bin(y_m_d & 0xff);
+ tm->tm_hour = bcd2bin((h_m_s_ms >> 56) & 0xff);
+ tm->tm_min = bcd2bin((h_m_s_ms >> 48) & 0xff);
+ tm->tm_sec = bcd2bin((h_m_s_ms >> 40) & 0xff);
+
+ GregorianDay(tm);
+}
+
+unsigned long __init opal_get_boot_time(void)
+{
+ struct rtc_time tm;
+ u32 y_m_d;
+ u64 h_m_s_ms;
+ long rc = OPAL_BUSY;
+
+ while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
+ rc = opal_rtc_read(&y_m_d, &h_m_s_ms);
+ if (rc == OPAL_BUSY_EVENT)
+ opal_poll_events(NULL);
+ else
+ mdelay(10);
+ }
+ if (rc != OPAL_SUCCESS)
+ return 0;
+ opal_to_tm(y_m_d, h_m_s_ms, &tm);
+ return mktime(tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday,
+ tm.tm_hour, tm.tm_min, tm.tm_sec);
+}
+
+void opal_get_rtc_time(struct rtc_time *tm)
+{
+ long rc = OPAL_BUSY;
+ u32 y_m_d;
+ u64 h_m_s_ms;
+
+ while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
+ rc = opal_rtc_read(&y_m_d, &h_m_s_ms);
+ if (rc == OPAL_BUSY_EVENT)
+ opal_poll_events(NULL);
+ else
+ mdelay(10);
+ }
+ if (rc != OPAL_SUCCESS)
+ return;
+ opal_to_tm(y_m_d, h_m_s_ms, tm);
+}
+
+int opal_set_rtc_time(struct rtc_time *tm)
+{
+ long rc = OPAL_BUSY;
+ u32 y_m_d = 0;
+ u64 h_m_s_ms = 0;
+
+ y_m_d |= ((u32)bin2bcd((tm->tm_year + 1900) / 100)) << 24;
+ y_m_d |= ((u32)bin2bcd((tm->tm_year + 1900) % 100)) << 16;
+ y_m_d |= ((u32)bin2bcd((tm->tm_mon + 1))) << 8;
+ y_m_d |= ((u32)bin2bcd(tm->tm_mday));
+
+ h_m_s_ms |= ((u64)bin2bcd(tm->tm_hour)) << 56;
+ h_m_s_ms |= ((u64)bin2bcd(tm->tm_min)) << 48;
+ h_m_s_ms |= ((u64)bin2bcd(tm->tm_sec)) << 40;
+
+ while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
+ rc = opal_rtc_write(y_m_d, h_m_s_ms);
+ if (rc == OPAL_BUSY_EVENT)
+ opal_poll_events(NULL);
+ else
+ mdelay(10);
+ }
+ return rc == OPAL_SUCCESS ? 0 : -EIO;
+}
--- /dev/null
+/*
+ * PowerNV OPAL takeover assembly code, for use by prom_init.c
+ *
+ * Copyright 2011 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/ppc_asm.h>
+#include <asm/hvcall.h>
+#include <asm/asm-offsets.h>
+#include <asm/opal.h>
+
+#define STK_PARAM(i) (48 + ((i)-3)*8)
+
+#define H_HAL_TAKEOVER 0x5124
+#define H_HAL_TAKEOVER_QUERY_MAGIC -1
+
+ .text
+_GLOBAL(opal_query_takeover)
+ mfcr r0
+ stw r0,8(r1)
+ std r3,STK_PARAM(r3)(r1)
+ std r4,STK_PARAM(r4)(r1)
+ li r3,H_HAL_TAKEOVER
+ li r4,H_HAL_TAKEOVER_QUERY_MAGIC
+ HVSC
+ ld r10,STK_PARAM(r3)(r1)
+ std r4,0(r10)
+ ld r10,STK_PARAM(r4)(r1)
+ std r5,0(r10)
+ lwz r0,8(r1)
+ mtcrf 0xff,r0
+ blr
+
+_GLOBAL(opal_do_takeover)
+ mfcr r0
+ stw r0,8(r1)
+ mflr r0
+ std r0,16(r1)
+ bl __opal_do_takeover
+ ld r0,16(r1)
+ mtlr r0
+ lwz r0,8(r1)
+ mtcrf 0xff,r0
+ blr
+
+__opal_do_takeover:
+ ld r4,0(r3)
+ ld r5,0x8(r3)
+ ld r6,0x10(r3)
+ ld r7,0x18(r3)
+ ld r8,0x20(r3)
+ ld r9,0x28(r3)
+ ld r10,0x30(r3)
+ ld r11,0x38(r3)
+ li r3,H_HAL_TAKEOVER
+ HVSC
+ blr
+
+ .globl opal_secondary_entry
+opal_secondary_entry:
+ mr r31,r3
+ mfmsr r11
+ li r12,(MSR_SF | MSR_ISF)@highest
+ sldi r12,r12,48
+ or r11,r11,r12
+ mtmsrd r11
+ isync
+ mfspr r4,SPRN_PIR
+ std r4,0(r3)
+1: HMT_LOW
+ ld r4,8(r3)
+ cmpli cr0,r4,0
+ beq 1b
+ HMT_MEDIUM
+1: addi r3,r31,16
+ bl __opal_do_takeover
+ b 1b
+
+_GLOBAL(opal_enter_rtas)
+ mflr r0
+ std r0,16(r1)
+ stdu r1,-PROM_FRAME_SIZE(r1) /* Save SP and create stack space */
+
+ /* Because PROM is running in 32b mode, it clobbers the high order half
+ * of all registers that it saves. We therefore save those registers
+ * PROM might touch to the stack. (r0, r3-r13 are caller saved)
+ */
+ SAVE_GPR(2, r1)
+ SAVE_GPR(13, r1)
+ SAVE_8GPRS(14, r1)
+ SAVE_10GPRS(22, r1)
+ mfcr r10
+ mfmsr r11
+ std r10,_CCR(r1)
+ std r11,_MSR(r1)
+
+ /* Get the PROM entrypoint */
+ mtlr r5
+
+ /* Switch MSR to 32 bits mode
+ */
+ li r12,1
+ rldicr r12,r12,MSR_SF_LG,(63-MSR_SF_LG)
+ andc r11,r11,r12
+ li r12,1
+ rldicr r12,r12,MSR_ISF_LG,(63-MSR_ISF_LG)
+ andc r11,r11,r12
+ mtmsrd r11
+ isync
+
+ /* Enter RTAS here... */
+ blrl
+
+ /* Just make sure that r1 top 32 bits didn't get
+ * corrupt by OF
+ */
+ rldicl r1,r1,0,32
+
+ /* Restore the MSR (back to 64 bits) */
+ ld r0,_MSR(r1)
+ MTMSRD(r0)
+ isync
+
+ /* Restore other registers */
+ REST_GPR(2, r1)
+ REST_GPR(13, r1)
+ REST_8GPRS(14, r1)
+ REST_10GPRS(22, r1)
+ ld r4,_CCR(r1)
+ mtcr r4
+
+ addi r1,r1,PROM_FRAME_SIZE
+ ld r0,16(r1)
+ mtlr r0
+ blr
--- /dev/null
+/*
+ * PowerNV OPAL API wrappers
+ *
+ * Copyright 2011 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/ppc_asm.h>
+#include <asm/hvcall.h>
+#include <asm/asm-offsets.h>
+#include <asm/opal.h>
+
+/* TODO:
+ *
+ * - Trace irqs in/off (needs saving/restoring all args, argh...)
+ * - Get r11 feed up by Dave so I can have better register usage
+ */
+#define OPAL_CALL(name, token) \
+ _GLOBAL(name); \
+ mflr r0; \
+ mfcr r12; \
+ std r0,16(r1); \
+ std r12,8(r1); \
+ std r1,PACAR1(r13); \
+ li r0,0; \
+ mfmsr r12; \
+ ori r0,r0,MSR_EE; \
+ std r12,PACASAVEDMSR(r13); \
+ andc r12,r12,r0; \
+ mtmsrd r12,1; \
+ LOAD_REG_ADDR(r0,.opal_return); \
+ mtlr r0; \
+ li r0,MSR_DR|MSR_IR; \
+ andc r12,r12,r0; \
+ li r0,token; \
+ mtspr SPRN_HSRR1,r12; \
+ LOAD_REG_ADDR(r11,opal); \
+ ld r12,8(r11); \
+ ld r2,0(r11); \
+ mtspr SPRN_HSRR0,r12; \
+ hrfid
+
+_STATIC(opal_return)
+ ld r2,PACATOC(r13);
+ ld r4,8(r1);
+ ld r5,16(r1);
+ ld r6,PACASAVEDMSR(r13);
+ mtspr SPRN_SRR0,r5;
+ mtspr SPRN_SRR1,r6;
+ mtcr r4;
+ rfid
+
+OPAL_CALL(opal_console_write, OPAL_CONSOLE_WRITE);
+OPAL_CALL(opal_console_read, OPAL_CONSOLE_READ);
+OPAL_CALL(opal_console_write_buffer_space, OPAL_CONSOLE_WRITE_BUFFER_SPACE);
+OPAL_CALL(opal_rtc_read, OPAL_RTC_READ);
+OPAL_CALL(opal_rtc_write, OPAL_RTC_WRITE);
+OPAL_CALL(opal_cec_power_down, OPAL_CEC_POWER_DOWN);
+OPAL_CALL(opal_cec_reboot, OPAL_CEC_REBOOT);
+OPAL_CALL(opal_read_nvram, OPAL_READ_NVRAM);
+OPAL_CALL(opal_write_nvram, OPAL_WRITE_NVRAM);
+OPAL_CALL(opal_handle_interrupt, OPAL_HANDLE_INTERRUPT);
+OPAL_CALL(opal_poll_events, OPAL_POLL_EVENTS);
+OPAL_CALL(opal_pci_set_hub_tce_memory, OPAL_PCI_SET_HUB_TCE_MEMORY);
+OPAL_CALL(opal_pci_set_phb_tce_memory, OPAL_PCI_SET_PHB_TCE_MEMORY);
+OPAL_CALL(opal_pci_config_read_byte, OPAL_PCI_CONFIG_READ_BYTE);
+OPAL_CALL(opal_pci_config_read_half_word, OPAL_PCI_CONFIG_READ_HALF_WORD);
+OPAL_CALL(opal_pci_config_read_word, OPAL_PCI_CONFIG_READ_WORD);
+OPAL_CALL(opal_pci_config_write_byte, OPAL_PCI_CONFIG_WRITE_BYTE);
+OPAL_CALL(opal_pci_config_write_half_word, OPAL_PCI_CONFIG_WRITE_HALF_WORD);
+OPAL_CALL(opal_pci_config_write_word, OPAL_PCI_CONFIG_WRITE_WORD);
+OPAL_CALL(opal_set_xive, OPAL_SET_XIVE);
+OPAL_CALL(opal_get_xive, OPAL_GET_XIVE);
+OPAL_CALL(opal_register_exception_handler, OPAL_REGISTER_OPAL_EXCEPTION_HANDLER);
+OPAL_CALL(opal_pci_eeh_freeze_status, OPAL_PCI_EEH_FREEZE_STATUS);
+OPAL_CALL(opal_pci_eeh_freeze_clear, OPAL_PCI_EEH_FREEZE_CLEAR);
+OPAL_CALL(opal_pci_shpc, OPAL_PCI_SHPC);
+OPAL_CALL(opal_pci_phb_mmio_enable, OPAL_PCI_PHB_MMIO_ENABLE);
+OPAL_CALL(opal_pci_set_phb_mem_window, OPAL_PCI_SET_PHB_MEM_WINDOW);
+OPAL_CALL(opal_pci_map_pe_mmio_window, OPAL_PCI_MAP_PE_MMIO_WINDOW);
+OPAL_CALL(opal_pci_set_phb_table_memory, OPAL_PCI_SET_PHB_TABLE_MEMORY);
+OPAL_CALL(opal_pci_set_pe, OPAL_PCI_SET_PE);
+OPAL_CALL(opal_pci_set_peltv, OPAL_PCI_SET_PELTV);
+OPAL_CALL(opal_pci_set_mve, OPAL_PCI_SET_MVE);
+OPAL_CALL(opal_pci_set_mve_enable, OPAL_PCI_SET_MVE_ENABLE);
+OPAL_CALL(opal_pci_get_xive_reissue, OPAL_PCI_GET_XIVE_REISSUE);
+OPAL_CALL(opal_pci_set_xive_reissue, OPAL_PCI_SET_XIVE_REISSUE);
+OPAL_CALL(opal_pci_set_xive_pe, OPAL_PCI_SET_XIVE_PE);
+OPAL_CALL(opal_get_xive_source, OPAL_GET_XIVE_SOURCE);
+OPAL_CALL(opal_get_msi_32, OPAL_GET_MSI_32);
+OPAL_CALL(opal_get_msi_64, OPAL_GET_MSI_64);
+OPAL_CALL(opal_start_cpu, OPAL_START_CPU);
+OPAL_CALL(opal_query_cpu_status, OPAL_QUERY_CPU_STATUS);
+OPAL_CALL(opal_write_oppanel, OPAL_WRITE_OPPANEL);
+OPAL_CALL(opal_pci_map_pe_dma_window, OPAL_PCI_MAP_PE_DMA_WINDOW);
+OPAL_CALL(opal_pci_map_pe_dma_window_real, OPAL_PCI_MAP_PE_DMA_WINDOW_REAL);
+OPAL_CALL(opal_pci_reset, OPAL_PCI_RESET);
--- /dev/null
+/*
+ * PowerNV OPAL high level interfaces
+ *
+ * Copyright 2011 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#undef DEBUG
+
+#include <linux/types.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/interrupt.h>
+#include <asm/opal.h>
+#include <asm/firmware.h>
+
+#include "powernv.h"
+
+struct opal {
+ u64 base;
+ u64 entry;
+} opal;
+
+static struct device_node *opal_node;
+static DEFINE_SPINLOCK(opal_write_lock);
+extern u64 opal_mc_secondary_handler[];
+
+int __init early_init_dt_scan_opal(unsigned long node,
+ const char *uname, int depth, void *data)
+{
+ const void *basep, *entryp;
+ unsigned long basesz, entrysz;
+ u64 glue;
+
+ if (depth != 1 || strcmp(uname, "ibm,opal") != 0)
+ return 0;
+
+ basep = of_get_flat_dt_prop(node, "opal-base-address", &basesz);
+ entryp = of_get_flat_dt_prop(node, "opal-entry-address", &entrysz);
+
+ if (!basep || !entryp)
+ return 1;
+
+ opal.base = of_read_number(basep, basesz/4);
+ opal.entry = of_read_number(entryp, entrysz/4);
+
+ pr_debug("OPAL Base = 0x%llx (basep=%p basesz=%ld)\n",
+ opal.base, basep, basesz);
+ pr_debug("OPAL Entry = 0x%llx (entryp=%p basesz=%ld)\n",
+ opal.entry, entryp, entrysz);
+
+ powerpc_firmware_features |= FW_FEATURE_OPAL;
+ if (of_flat_dt_is_compatible(node, "ibm,opal-v2")) {
+ powerpc_firmware_features |= FW_FEATURE_OPALv2;
+ printk("OPAL V2 detected !\n");
+ } else {
+ printk("OPAL V1 detected !\n");
+ }
+
+ /* Hookup some exception handlers. We use the fwnmi area at 0x7000
+ * to provide the glue space to OPAL
+ */
+ glue = 0x7000;
+ opal_register_exception_handler(OPAL_MACHINE_CHECK_HANDLER,
+ __pa(opal_mc_secondary_handler[0]),
+ glue);
+ glue += 128;
+ opal_register_exception_handler(OPAL_HYPERVISOR_MAINTENANCE_HANDLER,
+ 0, glue);
+ glue += 128;
+ opal_register_exception_handler(OPAL_SOFTPATCH_HANDLER, 0, glue);
+
+ return 1;
+}
+
+int opal_get_chars(uint32_t vtermno, char *buf, int count)
+{
+ s64 len, rc;
+ u64 evt;
+
+ if (!opal.entry)
+ return -ENODEV;
+ opal_poll_events(&evt);
+ if ((evt & OPAL_EVENT_CONSOLE_INPUT) == 0)
+ return 0;
+ len = count;
+ rc = opal_console_read(vtermno, &len, buf);
+ if (rc == OPAL_SUCCESS)
+ return len;
+ return 0;
+}
+
+int opal_put_chars(uint32_t vtermno, const char *data, int total_len)
+{
+ int written = 0;
+ s64 len, rc;
+ unsigned long flags;
+ u64 evt;
+
+ if (!opal.entry)
+ return -ENODEV;
+
+ /* We want put_chars to be atomic to avoid mangling of hvsi
+ * packets. To do that, we first test for room and return
+ * -EAGAIN if there isn't enough.
+ *
+ * Unfortunately, opal_console_write_buffer_space() doesn't
+ * appear to work on opal v1, so we just assume there is
+ * enough room and be done with it
+ */
+ spin_lock_irqsave(&opal_write_lock, flags);
+ if (firmware_has_feature(FW_FEATURE_OPALv2)) {
+ rc = opal_console_write_buffer_space(vtermno, &len);
+ if (rc || len < total_len) {
+ spin_unlock_irqrestore(&opal_write_lock, flags);
+ /* Closed -> drop characters */
+ if (rc)
+ return total_len;
+ opal_poll_events(&evt);
+ return -EAGAIN;
+ }
+ }
+
+ /* We still try to handle partial completions, though they
+ * should no longer happen.
+ */
+ rc = OPAL_BUSY;
+ while(total_len > 0 && (rc == OPAL_BUSY ||
+ rc == OPAL_BUSY_EVENT || rc == OPAL_SUCCESS)) {
+ len = total_len;
+ rc = opal_console_write(vtermno, &len, data);
+ if (rc == OPAL_SUCCESS) {
+ total_len -= len;
+ data += len;
+ written += len;
+ }
+ /* This is a bit nasty but we need that for the console to
+ * flush when there aren't any interrupts. We will clean
+ * things a bit later to limit that to synchronous path
+ * such as the kernel console and xmon/udbg
+ */
+ do
+ opal_poll_events(&evt);
+ while(rc == OPAL_SUCCESS && (evt & OPAL_EVENT_CONSOLE_OUTPUT));
+ }
+ spin_unlock_irqrestore(&opal_write_lock, flags);
+ return written;
+}
+
+int opal_machine_check(struct pt_regs *regs)
+{
+ struct opal_machine_check_event *opal_evt = get_paca()->opal_mc_evt;
+ struct opal_machine_check_event evt;
+ const char *level, *sevstr, *subtype;
+ static const char *opal_mc_ue_types[] = {
+ "Indeterminate",
+ "Instruction fetch",
+ "Page table walk ifetch",
+ "Load/Store",
+ "Page table walk Load/Store",
+ };
+ static const char *opal_mc_slb_types[] = {
+ "Indeterminate",
+ "Parity",
+ "Multihit",
+ };
+ static const char *opal_mc_erat_types[] = {
+ "Indeterminate",
+ "Parity",
+ "Multihit",
+ };
+ static const char *opal_mc_tlb_types[] = {
+ "Indeterminate",
+ "Parity",
+ "Multihit",
+ };
+
+ /* Copy the event structure and release the original */
+ evt = *opal_evt;
+ opal_evt->in_use = 0;
+
+ /* Print things out */
+ if (evt.version != OpalMCE_V1) {
+ pr_err("Machine Check Exception, Unknown event version %d !\n",
+ evt.version);
+ return 0;
+ }
+ switch(evt.severity) {
+ case OpalMCE_SEV_NO_ERROR:
+ level = KERN_INFO;
+ sevstr = "Harmless";
+ break;
+ case OpalMCE_SEV_WARNING:
+ level = KERN_WARNING;
+ sevstr = "";
+ break;
+ case OpalMCE_SEV_ERROR_SYNC:
+ level = KERN_ERR;
+ sevstr = "Severe";
+ break;
+ case OpalMCE_SEV_FATAL:
+ default:
+ level = KERN_ERR;
+ sevstr = "Fatal";
+ break;
+ }
+
+ printk("%s%s Machine check interrupt [%s]\n", level, sevstr,
+ evt.disposition == OpalMCE_DISPOSITION_RECOVERED ?
+ "Recovered" : "[Not recovered");
+ printk("%s Initiator: %s\n", level,
+ evt.initiator == OpalMCE_INITIATOR_CPU ? "CPU" : "Unknown");
+ switch(evt.error_type) {
+ case OpalMCE_ERROR_TYPE_UE:
+ subtype = evt.u.ue_error.ue_error_type <
+ ARRAY_SIZE(opal_mc_ue_types) ?
+ opal_mc_ue_types[evt.u.ue_error.ue_error_type]
+ : "Unknown";
+ printk("%s Error type: UE [%s]\n", level, subtype);
+ if (evt.u.ue_error.effective_address_provided)
+ printk("%s Effective address: %016llx\n",
+ level, evt.u.ue_error.effective_address);
+ if (evt.u.ue_error.physical_address_provided)
+ printk("%s Physial address: %016llx\n",
+ level, evt.u.ue_error.physical_address);
+ break;
+ case OpalMCE_ERROR_TYPE_SLB:
+ subtype = evt.u.slb_error.slb_error_type <
+ ARRAY_SIZE(opal_mc_slb_types) ?
+ opal_mc_slb_types[evt.u.slb_error.slb_error_type]
+ : "Unknown";
+ printk("%s Error type: SLB [%s]\n", level, subtype);
+ if (evt.u.slb_error.effective_address_provided)
+ printk("%s Effective address: %016llx\n",
+ level, evt.u.slb_error.effective_address);
+ break;
+ case OpalMCE_ERROR_TYPE_ERAT:
+ subtype = evt.u.erat_error.erat_error_type <
+ ARRAY_SIZE(opal_mc_erat_types) ?
+ opal_mc_erat_types[evt.u.erat_error.erat_error_type]
+ : "Unknown";
+ printk("%s Error type: ERAT [%s]\n", level, subtype);
+ if (evt.u.erat_error.effective_address_provided)
+ printk("%s Effective address: %016llx\n",
+ level, evt.u.erat_error.effective_address);
+ break;
+ case OpalMCE_ERROR_TYPE_TLB:
+ subtype = evt.u.tlb_error.tlb_error_type <
+ ARRAY_SIZE(opal_mc_tlb_types) ?
+ opal_mc_tlb_types[evt.u.tlb_error.tlb_error_type]
+ : "Unknown";
+ printk("%s Error type: TLB [%s]\n", level, subtype);
+ if (evt.u.tlb_error.effective_address_provided)
+ printk("%s Effective address: %016llx\n",
+ level, evt.u.tlb_error.effective_address);
+ break;
+ default:
+ case OpalMCE_ERROR_TYPE_UNKNOWN:
+ printk("%s Error type: Unknown\n", level);
+ break;
+ }
+ return evt.severity == OpalMCE_SEV_FATAL ? 0 : 1;
+}
+
+static irqreturn_t opal_interrupt(int irq, void *data)
+{
+ uint64_t events;
+
+ opal_handle_interrupt(virq_to_hw(irq), &events);
+
+ /* XXX TODO: Do something with the events */
+
+ return IRQ_HANDLED;
+}
+
+static int __init opal_init(void)
+{
+ struct device_node *np, *consoles;
+ const u32 *irqs;
+ int rc, i, irqlen;
+
+ opal_node = of_find_node_by_path("/ibm,opal");
+ if (!opal_node) {
+ pr_warn("opal: Node not found\n");
+ return -ENODEV;
+ }
+ if (firmware_has_feature(FW_FEATURE_OPALv2))
+ consoles = of_find_node_by_path("/ibm,opal/consoles");
+ else
+ consoles = of_node_get(opal_node);
+
+ /* Register serial ports */
+ for_each_child_of_node(consoles, np) {
+ if (strcmp(np->name, "serial"))
+ continue;
+ of_platform_device_create(np, NULL, NULL);
+ }
+ of_node_put(consoles);
+
+ /* Find all OPAL interrupts and request them */
+ irqs = of_get_property(opal_node, "opal-interrupts", &irqlen);
+ pr_debug("opal: Found %d interrupts reserved for OPAL\n",
+ irqs ? (irqlen / 4) : 0);
+ for (i = 0; irqs && i < (irqlen / 4); i++, irqs++) {
+ unsigned int hwirq = be32_to_cpup(irqs);
+ unsigned int irq = irq_create_mapping(NULL, hwirq);
+ if (irq == NO_IRQ) {
+ pr_warning("opal: Failed to map irq 0x%x\n", hwirq);
+ continue;
+ }
+ rc = request_irq(irq, opal_interrupt, 0, "opal", NULL);
+ if (rc)
+ pr_warning("opal: Error %d requesting irq %d"
+ " (0x%x)\n", rc, irq, hwirq);
+ }
+ return 0;
+}
+subsys_initcall(opal_init);
--- /dev/null
+/*
+ * Support PCI/PCIe on PowerNV platforms
+ *
+ * Currently supports only P5IOC2
+ *
+ * Copyright 2011 Benjamin Herrenschmidt, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/msi.h>
+
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/ppc-pci.h>
+#include <asm/opal.h>
+#include <asm/iommu.h>
+#include <asm/tce.h>
+#include <asm/abs_addr.h>
+
+#include "powernv.h"
+#include "pci.h"
+
+/* For now, use a fixed amount of TCE memory for each p5ioc2
+ * hub, 16M will do
+ */
+#define P5IOC2_TCE_MEMORY 0x01000000
+
+#ifdef CONFIG_PCI_MSI
+static int pnv_pci_p5ioc2_msi_setup(struct pnv_phb *phb, struct pci_dev *dev,
+ unsigned int hwirq, unsigned int is_64,
+ struct msi_msg *msg)
+{
+ if (WARN_ON(!is_64))
+ return -ENXIO;
+ msg->data = hwirq - phb->msi_base;
+ msg->address_hi = 0x10000000;
+ msg->address_lo = 0;
+
+ return 0;
+}
+
+static void pnv_pci_init_p5ioc2_msis(struct pnv_phb *phb)
+{
+ unsigned int bmap_size;
+ const __be32 *prop = of_get_property(phb->hose->dn,
+ "ibm,opal-msi-ranges", NULL);
+ if (!prop)
+ return;
+
+ /* Don't do MSI's on p5ioc2 PCI-X are they are not properly
+ * verified in HW
+ */
+ if (of_device_is_compatible(phb->hose->dn, "ibm,p5ioc2-pcix"))
+ return;
+ phb->msi_base = be32_to_cpup(prop);
+ phb->msi_count = be32_to_cpup(prop + 1);
+ bmap_size = BITS_TO_LONGS(phb->msi_count) * sizeof(unsigned long);
+ phb->msi_map = zalloc_maybe_bootmem(bmap_size, GFP_KERNEL);
+ if (!phb->msi_map) {
+ pr_err("PCI %d: Failed to allocate MSI bitmap !\n",
+ phb->hose->global_number);
+ return;
+ }
+ phb->msi_setup = pnv_pci_p5ioc2_msi_setup;
+ phb->msi32_support = 0;
+ pr_info(" Allocated bitmap for %d MSIs (base IRQ 0x%x)\n",
+ phb->msi_count, phb->msi_base);
+}
+#else
+static void pnv_pci_init_p5ioc2_msis(struct pnv_phb *phb) { }
+#endif /* CONFIG_PCI_MSI */
+
+static void __devinit pnv_pci_p5ioc2_dma_dev_setup(struct pnv_phb *phb,
+ struct pci_dev *pdev)
+{
+ if (phb->p5ioc2.iommu_table.it_map == NULL)
+ iommu_init_table(&phb->p5ioc2.iommu_table, phb->hose->node);
+
+ set_iommu_table_base(&pdev->dev, &phb->p5ioc2.iommu_table);
+}
+
+static void __init pnv_pci_init_p5ioc2_phb(struct device_node *np,
+ void *tce_mem, u64 tce_size)
+{
+ struct pnv_phb *phb;
+ const u64 *prop64;
+ u64 phb_id;
+ int64_t rc;
+ static int primary = 1;
+
+ pr_info(" Initializing p5ioc2 PHB %s\n", np->full_name);
+
+ prop64 = of_get_property(np, "ibm,opal-phbid", NULL);
+ if (!prop64) {
+ pr_err(" Missing \"ibm,opal-phbid\" property !\n");
+ return;
+ }
+ phb_id = be64_to_cpup(prop64);
+ pr_devel(" PHB-ID : 0x%016llx\n", phb_id);
+ pr_devel(" TCE AT : 0x%016lx\n", __pa(tce_mem));
+ pr_devel(" TCE SZ : 0x%016llx\n", tce_size);
+
+ rc = opal_pci_set_phb_tce_memory(phb_id, __pa(tce_mem), tce_size);
+ if (rc != OPAL_SUCCESS) {
+ pr_err(" Failed to set TCE memory, OPAL error %lld\n", rc);
+ return;
+ }
+
+ phb = alloc_bootmem(sizeof(struct pnv_phb));
+ if (phb) {
+ memset(phb, 0, sizeof(struct pnv_phb));
+ phb->hose = pcibios_alloc_controller(np);
+ }
+ if (!phb || !phb->hose) {
+ pr_err(" Failed to allocate PCI controller\n");
+ return;
+ }
+
+ spin_lock_init(&phb->lock);
+ phb->hose->first_busno = 0;
+ phb->hose->last_busno = 0xff;
+ phb->hose->private_data = phb;
+ phb->opal_id = phb_id;
+ phb->type = PNV_PHB_P5IOC2;
+
+ phb->regs = of_iomap(np, 0);
+
+ if (phb->regs == NULL)
+ pr_err(" Failed to map registers !\n");
+ else {
+ pr_devel(" P_BUID = 0x%08x\n", in_be32(phb->regs + 0x100));
+ pr_devel(" P_IOSZ = 0x%08x\n", in_be32(phb->regs + 0x1b0));
+ pr_devel(" P_IO_ST = 0x%08x\n", in_be32(phb->regs + 0x1e0));
+ pr_devel(" P_MEM1_H = 0x%08x\n", in_be32(phb->regs + 0x1a0));
+ pr_devel(" P_MEM1_L = 0x%08x\n", in_be32(phb->regs + 0x190));
+ pr_devel(" P_MSZ1_L = 0x%08x\n", in_be32(phb->regs + 0x1c0));
+ pr_devel(" P_MEM_ST = 0x%08x\n", in_be32(phb->regs + 0x1d0));
+ pr_devel(" P_MEM2_H = 0x%08x\n", in_be32(phb->regs + 0x2c0));
+ pr_devel(" P_MEM2_L = 0x%08x\n", in_be32(phb->regs + 0x2b0));
+ pr_devel(" P_MSZ2_H = 0x%08x\n", in_be32(phb->regs + 0x2d0));
+ pr_devel(" P_MSZ2_L = 0x%08x\n", in_be32(phb->regs + 0x2e0));
+ }
+
+ /* Interpret the "ranges" property */
+ /* This also maps the I/O region and sets isa_io/mem_base */
+ pci_process_bridge_OF_ranges(phb->hose, np, primary);
+ primary = 0;
+
+ phb->hose->ops = &pnv_pci_ops;
+
+ /* Setup MSI support */
+ pnv_pci_init_p5ioc2_msis(phb);
+
+ /* Setup TCEs */
+ phb->dma_dev_setup = pnv_pci_p5ioc2_dma_dev_setup;
+ pnv_pci_setup_iommu_table(&phb->p5ioc2.iommu_table,
+ tce_mem, tce_size, 0);
+}
+
+void __init pnv_pci_init_p5ioc2_hub(struct device_node *np)
+{
+ struct device_node *phbn;
+ const u64 *prop64;
+ u64 hub_id;
+ void *tce_mem;
+ uint64_t tce_per_phb;
+ int64_t rc;
+ int phb_count = 0;
+
+ pr_info("Probing p5ioc2 IO-Hub %s\n", np->full_name);
+
+ prop64 = of_get_property(np, "ibm,opal-hubid", NULL);
+ if (!prop64) {
+ pr_err(" Missing \"ibm,opal-hubid\" property !\n");
+ return;
+ }
+ hub_id = be64_to_cpup(prop64);
+ pr_info(" HUB-ID : 0x%016llx\n", hub_id);
+
+ /* Currently allocate 16M of TCE memory for every Hub
+ *
+ * XXX TODO: Make it chip local if possible
+ */
+ tce_mem = __alloc_bootmem(P5IOC2_TCE_MEMORY, P5IOC2_TCE_MEMORY,
+ __pa(MAX_DMA_ADDRESS));
+ if (!tce_mem) {
+ pr_err(" Failed to allocate TCE Memory !\n");
+ return;
+ }
+ pr_debug(" TCE : 0x%016lx..0x%016lx\n",
+ __pa(tce_mem), __pa(tce_mem) + P5IOC2_TCE_MEMORY - 1);
+ rc = opal_pci_set_hub_tce_memory(hub_id, __pa(tce_mem),
+ P5IOC2_TCE_MEMORY);
+ if (rc != OPAL_SUCCESS) {
+ pr_err(" Failed to allocate TCE memory, OPAL error %lld\n", rc);
+ return;
+ }
+
+ /* Count child PHBs */
+ for_each_child_of_node(np, phbn) {
+ if (of_device_is_compatible(phbn, "ibm,p5ioc2-pcix") ||
+ of_device_is_compatible(phbn, "ibm,p5ioc2-pciex"))
+ phb_count++;
+ }
+
+ /* Calculate how much TCE space we can give per PHB */
+ tce_per_phb = __rounddown_pow_of_two(P5IOC2_TCE_MEMORY / phb_count);
+ pr_info(" Allocating %lld MB of TCE memory per PHB\n",
+ tce_per_phb >> 20);
+
+ /* Initialize PHBs */
+ for_each_child_of_node(np, phbn) {
+ if (of_device_is_compatible(phbn, "ibm,p5ioc2-pcix") ||
+ of_device_is_compatible(phbn, "ibm,p5ioc2-pciex")) {
+ pnv_pci_init_p5ioc2_phb(phbn, tce_mem, tce_per_phb);
+ tce_mem += tce_per_phb;
+ }
+ }
+}
--- /dev/null
+/*
+ * Support PCI/PCIe on PowerNV platforms
+ *
+ * Currently supports only P5IOC2
+ *
+ * Copyright 2011 Benjamin Herrenschmidt, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/msi.h>
+
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/ppc-pci.h>
+#include <asm/opal.h>
+#include <asm/iommu.h>
+#include <asm/tce.h>
+#include <asm/abs_addr.h>
+
+#include "powernv.h"
+#include "pci.h"
+
+/* Delay in usec */
+#define PCI_RESET_DELAY_US 3000000
+
+#define cfg_dbg(fmt...) do { } while(0)
+//#define cfg_dbg(fmt...) printk(fmt)
+
+#ifdef CONFIG_PCI_MSI
+static int pnv_msi_check_device(struct pci_dev* pdev, int nvec, int type)
+{
+ struct pci_controller *hose = pci_bus_to_host(pdev->bus);
+ struct pnv_phb *phb = hose->private_data;
+
+ return (phb && phb->msi_map) ? 0 : -ENODEV;
+}
+
+static unsigned int pnv_get_one_msi(struct pnv_phb *phb)
+{
+ unsigned int id;
+
+ spin_lock(&phb->lock);
+ id = find_next_zero_bit(phb->msi_map, phb->msi_count, phb->msi_next);
+ if (id >= phb->msi_count && phb->msi_next)
+ id = find_next_zero_bit(phb->msi_map, phb->msi_count, 0);
+ if (id >= phb->msi_count) {
+ spin_unlock(&phb->lock);
+ return 0;
+ }
+ __set_bit(id, phb->msi_map);
+ spin_unlock(&phb->lock);
+ return id + phb->msi_base;
+}
+
+static void pnv_put_msi(struct pnv_phb *phb, unsigned int hwirq)
+{
+ unsigned int id;
+
+ if (WARN_ON(hwirq < phb->msi_base ||
+ hwirq >= (phb->msi_base + phb->msi_count)))
+ return;
+ id = hwirq - phb->msi_base;
+ spin_lock(&phb->lock);
+ __clear_bit(id, phb->msi_map);
+ spin_unlock(&phb->lock);
+}
+
+static int pnv_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
+{
+ struct pci_controller *hose = pci_bus_to_host(pdev->bus);
+ struct pnv_phb *phb = hose->private_data;
+ struct msi_desc *entry;
+ struct msi_msg msg;
+ unsigned int hwirq, virq;
+ int rc;
+
+ if (WARN_ON(!phb))
+ return -ENODEV;
+
+ list_for_each_entry(entry, &pdev->msi_list, list) {
+ if (!entry->msi_attrib.is_64 && !phb->msi32_support) {
+ pr_warn("%s: Supports only 64-bit MSIs\n",
+ pci_name(pdev));
+ return -ENXIO;
+ }
+ hwirq = pnv_get_one_msi(phb);
+ if (!hwirq) {
+ pr_warn("%s: Failed to find a free MSI\n",
+ pci_name(pdev));
+ return -ENOSPC;
+ }
+ virq = irq_create_mapping(NULL, hwirq);
+ if (virq == NO_IRQ) {
+ pr_warn("%s: Failed to map MSI to linux irq\n",
+ pci_name(pdev));
+ pnv_put_msi(phb, hwirq);
+ return -ENOMEM;
+ }
+ rc = phb->msi_setup(phb, pdev, hwirq, entry->msi_attrib.is_64,
+ &msg);
+ if (rc) {
+ pr_warn("%s: Failed to setup MSI\n", pci_name(pdev));
+ irq_dispose_mapping(virq);
+ pnv_put_msi(phb, hwirq);
+ return rc;
+ }
+ irq_set_msi_desc(virq, entry);
+ write_msi_msg(virq, &msg);
+ }
+ return 0;
+}
+
+static void pnv_teardown_msi_irqs(struct pci_dev *pdev)
+{
+ struct pci_controller *hose = pci_bus_to_host(pdev->bus);
+ struct pnv_phb *phb = hose->private_data;
+ struct msi_desc *entry;
+
+ if (WARN_ON(!phb))
+ return;
+
+ list_for_each_entry(entry, &pdev->msi_list, list) {
+ if (entry->irq == NO_IRQ)
+ continue;
+ irq_set_msi_desc(entry->irq, NULL);
+ pnv_put_msi(phb, virq_to_hw(entry->irq));
+ irq_dispose_mapping(entry->irq);
+ }
+}
+#endif /* CONFIG_PCI_MSI */
+
+static void pnv_pci_config_check_eeh(struct pnv_phb *phb, struct pci_bus *bus,
+ u32 bdfn)
+{
+ s64 rc;
+ u8 fstate;
+ u16 pcierr;
+ u32 pe_no;
+
+ /* Get PE# if we support IODA */
+ pe_no = phb->bdfn_to_pe ? phb->bdfn_to_pe(phb, bus, bdfn & 0xff) : 0;
+
+ /* Read freeze status */
+ rc = opal_pci_eeh_freeze_status(phb->opal_id, pe_no, &fstate, &pcierr,
+ NULL);
+ if (rc) {
+ pr_warning("PCI %d: Failed to read EEH status for PE#%d,"
+ " err %lld\n", phb->hose->global_number, pe_no, rc);
+ return;
+ }
+ cfg_dbg(" -> EEH check, bdfn=%04x PE%d fstate=%x\n",
+ bdfn, pe_no, fstate);
+ if (fstate != 0) {
+ rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no,
+ OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
+ if (rc) {
+ pr_warning("PCI %d: Failed to clear EEH freeze state"
+ " for PE#%d, err %lld\n",
+ phb->hose->global_number, pe_no, rc);
+ }
+ }
+}
+
+static int pnv_pci_read_config(struct pci_bus *bus,
+ unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ struct pci_controller *hose = pci_bus_to_host(bus);
+ struct pnv_phb *phb = hose->private_data;
+ u32 bdfn = (((uint64_t)bus->number) << 8) | devfn;
+ s64 rc;
+
+ if (hose == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ switch (size) {
+ case 1: {
+ u8 v8;
+ rc = opal_pci_config_read_byte(phb->opal_id, bdfn, where, &v8);
+ *val = (rc == OPAL_SUCCESS) ? v8 : 0xff;
+ break;
+ }
+ case 2: {
+ u16 v16;
+ rc = opal_pci_config_read_half_word(phb->opal_id, bdfn, where,
+ &v16);
+ *val = (rc == OPAL_SUCCESS) ? v16 : 0xffff;
+ break;
+ }
+ case 4: {
+ u32 v32;
+ rc = opal_pci_config_read_word(phb->opal_id, bdfn, where, &v32);
+ *val = (rc == OPAL_SUCCESS) ? v32 : 0xffffffff;
+ break;
+ }
+ default:
+ return PCIBIOS_FUNC_NOT_SUPPORTED;
+ }
+ cfg_dbg("pnv_pci_read_config bus: %x devfn: %x +%x/%x -> %08x\n",
+ bus->number, devfn, where, size, *val);
+
+ /* Check if the PHB got frozen due to an error (no response) */
+ pnv_pci_config_check_eeh(phb, bus, bdfn);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pnv_pci_write_config(struct pci_bus *bus,
+ unsigned int devfn,
+ int where, int size, u32 val)
+{
+ struct pci_controller *hose = pci_bus_to_host(bus);
+ struct pnv_phb *phb = hose->private_data;
+ u32 bdfn = (((uint64_t)bus->number) << 8) | devfn;
+
+ if (hose == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ cfg_dbg("pnv_pci_write_config bus: %x devfn: %x +%x/%x -> %08x\n",
+ bus->number, devfn, where, size, val);
+ switch (size) {
+ case 1:
+ opal_pci_config_write_byte(phb->opal_id, bdfn, where, val);
+ break;
+ case 2:
+ opal_pci_config_write_half_word(phb->opal_id, bdfn, where, val);
+ break;
+ case 4:
+ opal_pci_config_write_word(phb->opal_id, bdfn, where, val);
+ break;
+ default:
+ return PCIBIOS_FUNC_NOT_SUPPORTED;
+ }
+ /* Check if the PHB got frozen due to an error (no response) */
+ pnv_pci_config_check_eeh(phb, bus, bdfn);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops pnv_pci_ops = {
+ .read = pnv_pci_read_config,
+ .write = pnv_pci_write_config,
+};
+
+static int pnv_tce_build(struct iommu_table *tbl, long index, long npages,
+ unsigned long uaddr, enum dma_data_direction direction,
+ struct dma_attrs *attrs)
+{
+ u64 proto_tce;
+ u64 *tcep;
+ u64 rpn;
+
+ proto_tce = TCE_PCI_READ; // Read allowed
+
+ if (direction != DMA_TO_DEVICE)
+ proto_tce |= TCE_PCI_WRITE;
+
+ tcep = ((u64 *)tbl->it_base) + index;
+
+ while (npages--) {
+ /* can't move this out since we might cross LMB boundary */
+ rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT;
+ *tcep = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
+
+ uaddr += TCE_PAGE_SIZE;
+ tcep++;
+ }
+ return 0;
+}
+
+static void pnv_tce_free(struct iommu_table *tbl, long index, long npages)
+{
+ u64 *tcep = ((u64 *)tbl->it_base) + index;
+
+ while (npages--)
+ *(tcep++) = 0;
+}
+
+void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
+ void *tce_mem, u64 tce_size,
+ u64 dma_offset)
+{
+ tbl->it_blocksize = 16;
+ tbl->it_base = (unsigned long)tce_mem;
+ tbl->it_offset = dma_offset >> IOMMU_PAGE_SHIFT;
+ tbl->it_index = 0;
+ tbl->it_size = tce_size >> 3;
+ tbl->it_busno = 0;
+ tbl->it_type = TCE_PCI;
+}
+
+static struct iommu_table * __devinit
+pnv_pci_setup_bml_iommu(struct pci_controller *hose)
+{
+ struct iommu_table *tbl;
+ const __be64 *basep;
+ const __be32 *sizep;
+
+ basep = of_get_property(hose->dn, "linux,tce-base", NULL);
+ sizep = of_get_property(hose->dn, "linux,tce-size", NULL);
+ if (basep == NULL || sizep == NULL) {
+ pr_err("PCI: %s has missing tce entries !\n", hose->dn->full_name);
+ return NULL;
+ }
+ tbl = kzalloc_node(sizeof(struct iommu_table), GFP_KERNEL, hose->node);
+ if (WARN_ON(!tbl))
+ return NULL;
+ pnv_pci_setup_iommu_table(tbl, __va(be64_to_cpup(basep)),
+ be32_to_cpup(sizep), 0);
+ iommu_init_table(tbl, hose->node);
+ return tbl;
+}
+
+static void __devinit pnv_pci_dma_fallback_setup(struct pci_controller *hose,
+ struct pci_dev *pdev)
+{
+ struct device_node *np = pci_bus_to_OF_node(hose->bus);
+ struct pci_dn *pdn;
+
+ if (np == NULL)
+ return;
+ pdn = PCI_DN(np);
+ if (!pdn->iommu_table)
+ pdn->iommu_table = pnv_pci_setup_bml_iommu(hose);
+ if (!pdn->iommu_table)
+ return;
+ set_iommu_table_base(&pdev->dev, pdn->iommu_table);
+}
+
+static void __devinit pnv_pci_dma_dev_setup(struct pci_dev *pdev)
+{
+ struct pci_controller *hose = pci_bus_to_host(pdev->bus);
+ struct pnv_phb *phb = hose->private_data;
+
+ /* If we have no phb structure, try to setup a fallback based on
+ * the device-tree (RTAS PCI for example)
+ */
+ if (phb && phb->dma_dev_setup)
+ phb->dma_dev_setup(phb, pdev);
+ else
+ pnv_pci_dma_fallback_setup(hose, pdev);
+}
+
+static int pnv_pci_probe_mode(struct pci_bus *bus)
+{
+ struct pci_controller *hose = pci_bus_to_host(bus);
+ const __be64 *tstamp;
+ u64 now, target;
+
+
+ /* We hijack this as a way to ensure we have waited long
+ * enough since the reset was lifted on the PCI bus
+ */
+ if (bus != hose->bus)
+ return PCI_PROBE_NORMAL;
+ tstamp = of_get_property(hose->dn, "reset-clear-timestamp", NULL);
+ if (!tstamp || !*tstamp)
+ return PCI_PROBE_NORMAL;
+
+ now = mftb() / tb_ticks_per_usec;
+ target = (be64_to_cpup(tstamp) / tb_ticks_per_usec)
+ + PCI_RESET_DELAY_US;
+
+ pr_devel("pci %04d: Reset target: 0x%llx now: 0x%llx\n",
+ hose->global_number, target, now);
+
+ if (now < target)
+ msleep((target - now + 999) / 1000);
+
+ return PCI_PROBE_NORMAL;
+}
+
+void __init pnv_pci_init(void)
+{
+ struct device_node *np;
+
+ pci_set_flags(PCI_CAN_SKIP_ISA_ALIGN);
+
+ /* We do not want to just probe */
+ pci_probe_only = 0;
+
+ /* OPAL absent, try POPAL first then RTAS detection of PHBs */
+ if (!firmware_has_feature(FW_FEATURE_OPAL)) {
+#ifdef CONFIG_PPC_POWERNV_RTAS
+ init_pci_config_tokens();
+ find_and_init_phbs();
+#endif /* CONFIG_PPC_POWERNV_RTAS */
+ } else {
+ /* OPAL is here, do our normal stuff */
+
+ /* Look for p5ioc2 IO-Hubs */
+ for_each_compatible_node(np, NULL, "ibm,p5ioc2")
+ pnv_pci_init_p5ioc2_hub(np);
+ }
+
+ /* Setup the linkage between OF nodes and PHBs */
+ pci_devs_phb_init();
+
+ /* Configure IOMMU DMA hooks */
+ ppc_md.pci_dma_dev_setup = pnv_pci_dma_dev_setup;
+ ppc_md.tce_build = pnv_tce_build;
+ ppc_md.tce_free = pnv_tce_free;
+ ppc_md.pci_probe_mode = pnv_pci_probe_mode;
+ set_pci_dma_ops(&dma_iommu_ops);
+
+ /* Configure MSIs */
+#ifdef CONFIG_PCI_MSI
+ ppc_md.msi_check_device = pnv_msi_check_device;
+ ppc_md.setup_msi_irqs = pnv_setup_msi_irqs;
+ ppc_md.teardown_msi_irqs = pnv_teardown_msi_irqs;
+#endif
+}
--- /dev/null
+#ifndef __POWERNV_PCI_H
+#define __POWERNV_PCI_H
+
+struct pci_dn;
+
+enum pnv_phb_type {
+ PNV_PHB_P5IOC2,
+ PNV_PHB_IODA1,
+ PNV_PHB_IODA2,
+};
+
+struct pnv_phb {
+ struct pci_controller *hose;
+ enum pnv_phb_type type;
+ u64 opal_id;
+ void __iomem *regs;
+ spinlock_t lock;
+
+#ifdef CONFIG_PCI_MSI
+ unsigned long *msi_map;
+ unsigned int msi_base;
+ unsigned int msi_count;
+ unsigned int msi_next;
+ unsigned int msi32_support;
+#endif
+ int (*msi_setup)(struct pnv_phb *phb, struct pci_dev *dev,
+ unsigned int hwirq, unsigned int is_64,
+ struct msi_msg *msg);
+ void (*dma_dev_setup)(struct pnv_phb *phb, struct pci_dev *pdev);
+ void (*fixup_phb)(struct pci_controller *hose);
+ u32 (*bdfn_to_pe)(struct pnv_phb *phb, struct pci_bus *bus, u32 devfn);
+
+ union {
+ struct {
+ struct iommu_table iommu_table;
+ } p5ioc2;
+ };
+};
+
+extern struct pci_ops pnv_pci_ops;
+
+extern void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
+ void *tce_mem, u64 tce_size,
+ u64 dma_offset);
+extern void pnv_pci_init_p5ioc2_hub(struct device_node *np);
+
+
+#endif /* __POWERNV_PCI_H */
--- /dev/null
+#ifndef _POWERNV_H
+#define _POWERNV_H
+
+#ifdef CONFIG_SMP
+extern void pnv_smp_init(void);
+#else
+static inline void pnv_smp_init(void) { }
+#endif
+
+#ifdef CONFIG_PCI
+extern void pnv_pci_init(void);
+#else
+static inline void pnv_pci_init(void) { }
+#endif
+
+#endif /* _POWERNV_H */
--- /dev/null
+/*
+ * PowerNV setup code.
+ *
+ * Copyright 2011 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#undef DEBUG
+
+#include <linux/cpu.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/tty.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <linux/of.h>
+#include <linux/interrupt.h>
+#include <linux/bug.h>
+
+#include <asm/machdep.h>
+#include <asm/firmware.h>
+#include <asm/xics.h>
+#include <asm/rtas.h>
+#include <asm/opal.h>
+#include <asm/xics.h>
+
+#include "powernv.h"
+
+static void __init pnv_setup_arch(void)
+{
+ /* Initialize SMP */
+ pnv_smp_init();
+
+ /* Setup PCI */
+ pnv_pci_init();
+
+ /* Setup RTC and NVRAM callbacks */
+ if (firmware_has_feature(FW_FEATURE_OPAL))
+ opal_nvram_init();
+
+ /* Enable NAP mode */
+ powersave_nap = 1;
+
+ /* XXX PMCS */
+}
+
+static void __init pnv_init_early(void)
+{
+#ifdef CONFIG_HVC_OPAL
+ if (firmware_has_feature(FW_FEATURE_OPAL))
+ hvc_opal_init_early();
+ else
+#endif
+ add_preferred_console("hvc", 0, NULL);
+}
+
+static void __init pnv_init_IRQ(void)
+{
+ xics_init();
+
+ WARN_ON(!ppc_md.get_irq);
+}
+
+static void pnv_show_cpuinfo(struct seq_file *m)
+{
+ struct device_node *root;
+ const char *model = "";
+
+ root = of_find_node_by_path("/");
+ if (root)
+ model = of_get_property(root, "model", NULL);
+ seq_printf(m, "machine\t\t: PowerNV %s\n", model);
+ if (firmware_has_feature(FW_FEATURE_OPALv2))
+ seq_printf(m, "firmware\t: OPAL v2\n");
+ else if (firmware_has_feature(FW_FEATURE_OPAL))
+ seq_printf(m, "firmware\t: OPAL v1\n");
+ else
+ seq_printf(m, "firmware\t: BML\n");
+ of_node_put(root);
+}
+
+static void __noreturn pnv_restart(char *cmd)
+{
+ long rc = OPAL_BUSY;
+
+ while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
+ rc = opal_cec_reboot();
+ if (rc == OPAL_BUSY_EVENT)
+ opal_poll_events(NULL);
+ else
+ mdelay(10);
+ }
+ for (;;)
+ opal_poll_events(NULL);
+}
+
+static void __noreturn pnv_power_off(void)
+{
+ long rc = OPAL_BUSY;
+
+ while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
+ rc = opal_cec_power_down(0);
+ if (rc == OPAL_BUSY_EVENT)
+ opal_poll_events(NULL);
+ else
+ mdelay(10);
+ }
+ for (;;)
+ opal_poll_events(NULL);
+}
+
+static void __noreturn pnv_halt(void)
+{
+ pnv_power_off();
+}
+
+static void pnv_progress(char *s, unsigned short hex)
+{
+}
+
+#ifdef CONFIG_KEXEC
+static void pnv_kexec_cpu_down(int crash_shutdown, int secondary)
+{
+ xics_kexec_teardown_cpu(secondary);
+}
+#endif /* CONFIG_KEXEC */
+
+static void __init pnv_setup_machdep_opal(void)
+{
+ ppc_md.get_boot_time = opal_get_boot_time;
+ ppc_md.get_rtc_time = opal_get_rtc_time;
+ ppc_md.set_rtc_time = opal_set_rtc_time;
+ ppc_md.restart = pnv_restart;
+ ppc_md.power_off = pnv_power_off;
+ ppc_md.halt = pnv_halt;
+ ppc_md.machine_check_exception = opal_machine_check;
+}
+
+#ifdef CONFIG_PPC_POWERNV_RTAS
+static void __init pnv_setup_machdep_rtas(void)
+{
+ if (rtas_token("get-time-of-day") != RTAS_UNKNOWN_SERVICE) {
+ ppc_md.get_boot_time = rtas_get_boot_time;
+ ppc_md.get_rtc_time = rtas_get_rtc_time;
+ ppc_md.set_rtc_time = rtas_set_rtc_time;
+ }
+ ppc_md.restart = rtas_restart;
+ ppc_md.power_off = rtas_power_off;
+ ppc_md.halt = rtas_halt;
+}
+#endif /* CONFIG_PPC_POWERNV_RTAS */
+
+static int __init pnv_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (!of_flat_dt_is_compatible(root, "ibm,powernv"))
+ return 0;
+
+ hpte_init_native();
+
+ if (firmware_has_feature(FW_FEATURE_OPAL))
+ pnv_setup_machdep_opal();
+#ifdef CONFIG_PPC_POWERNV_RTAS
+ else if (rtas.base)
+ pnv_setup_machdep_rtas();
+#endif /* CONFIG_PPC_POWERNV_RTAS */
+
+ pr_debug("PowerNV detected !\n");
+
+ return 1;
+}
+
+define_machine(powernv) {
+ .name = "PowerNV",
+ .probe = pnv_probe,
+ .init_early = pnv_init_early,
+ .setup_arch = pnv_setup_arch,
+ .init_IRQ = pnv_init_IRQ,
+ .show_cpuinfo = pnv_show_cpuinfo,
+ .progress = pnv_progress,
+ .power_save = power7_idle,
+ .calibrate_decr = generic_calibrate_decr,
+#ifdef CONFIG_KEXEC
+ .kexec_cpu_down = pnv_kexec_cpu_down,
+#endif
+};
--- /dev/null
+/*
+ * SMP support for PowerNV machines.
+ *
+ * Copyright 2011 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/cpu.h>
+
+#include <asm/irq.h>
+#include <asm/smp.h>
+#include <asm/paca.h>
+#include <asm/machdep.h>
+#include <asm/cputable.h>
+#include <asm/firmware.h>
+#include <asm/system.h>
+#include <asm/rtas.h>
+#include <asm/vdso_datapage.h>
+#include <asm/cputhreads.h>
+#include <asm/xics.h>
+#include <asm/opal.h>
+
+#include "powernv.h"
+
+#ifdef DEBUG
+#include <asm/udbg.h>
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+static void __cpuinit pnv_smp_setup_cpu(int cpu)
+{
+ if (cpu != boot_cpuid)
+ xics_setup_cpu();
+}
+
+static int pnv_smp_cpu_bootable(unsigned int nr)
+{
+ /* Special case - we inhibit secondary thread startup
+ * during boot if the user requests it.
+ */
+ if (system_state < SYSTEM_RUNNING && cpu_has_feature(CPU_FTR_SMT)) {
+ if (!smt_enabled_at_boot && cpu_thread_in_core(nr) != 0)
+ return 0;
+ if (smt_enabled_at_boot
+ && cpu_thread_in_core(nr) >= smt_enabled_at_boot)
+ return 0;
+ }
+
+ return 1;
+}
+
+int __devinit pnv_smp_kick_cpu(int nr)
+{
+ unsigned int pcpu = get_hard_smp_processor_id(nr);
+ unsigned long start_here = __pa(*((unsigned long *)
+ generic_secondary_smp_init));
+ long rc;
+
+ BUG_ON(nr < 0 || nr >= NR_CPUS);
+
+ /* On OPAL v2 the CPU are still spinning inside OPAL itself,
+ * get them back now
+ */
+ if (firmware_has_feature(FW_FEATURE_OPALv2)) {
+ pr_devel("OPAL: Starting CPU %d (HW 0x%x)...\n", nr, pcpu);
+ rc = opal_start_cpu(pcpu, start_here);
+ if (rc != OPAL_SUCCESS)
+ pr_warn("OPAL Error %ld starting CPU %d\n",
+ rc, nr);
+ }
+ return smp_generic_kick_cpu(nr);
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+
+static int pnv_smp_cpu_disable(void)
+{
+ int cpu = smp_processor_id();
+
+ /* This is identical to pSeries... might consolidate by
+ * moving migrate_irqs_away to a ppc_md with default to
+ * the generic fixup_irqs. --BenH.
+ */
+ set_cpu_online(cpu, false);
+ vdso_data->processorCount--;
+ if (cpu == boot_cpuid)
+ boot_cpuid = cpumask_any(cpu_online_mask);
+ xics_migrate_irqs_away();
+ return 0;
+}
+
+static void pnv_smp_cpu_kill_self(void)
+{
+ unsigned int cpu;
+
+ /* If powersave_nap is enabled, use NAP mode, else just
+ * spin aimlessly
+ */
+ if (!powersave_nap) {
+ generic_mach_cpu_die();
+ return;
+ }
+
+ /* Standard hot unplug procedure */
+ local_irq_disable();
+ idle_task_exit();
+ current->active_mm = NULL; /* for sanity */
+ cpu = smp_processor_id();
+ DBG("CPU%d offline\n", cpu);
+ generic_set_cpu_dead(cpu);
+ smp_wmb();
+
+ /* We don't want to take decrementer interrupts while we are offline,
+ * so clear LPCR:PECE1. We keep PECE2 enabled.
+ */
+ mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1);
+ while (!generic_check_cpu_restart(cpu)) {
+ power7_idle();
+ if (!generic_check_cpu_restart(cpu)) {
+ DBG("CPU%d Unexpected exit while offline !\n", cpu);
+ /* We may be getting an IPI, so we re-enable
+ * interrupts to process it, it will be ignored
+ * since we aren't online (hopefully)
+ */
+ local_irq_enable();
+ local_irq_disable();
+ }
+ }
+ mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) | LPCR_PECE1);
+ DBG("CPU%d coming online...\n", cpu);
+}
+
+#endif /* CONFIG_HOTPLUG_CPU */
+
+static struct smp_ops_t pnv_smp_ops = {
+ .message_pass = smp_muxed_ipi_message_pass,
+ .cause_ipi = NULL, /* Filled at runtime by xics_smp_probe() */
+ .probe = xics_smp_probe,
+ .kick_cpu = pnv_smp_kick_cpu,
+ .setup_cpu = pnv_smp_setup_cpu,
+ .cpu_bootable = pnv_smp_cpu_bootable,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_disable = pnv_smp_cpu_disable,
+ .cpu_die = generic_cpu_die,
+#endif /* CONFIG_HOTPLUG_CPU */
+};
+
+/* This is called very early during platform setup_arch */
+void __init pnv_smp_init(void)
+{
+ smp_ops = &pnv_smp_ops;
+
+ /* XXX We don't yet have a proper entry point from HAL, for
+ * now we rely on kexec-style entry from BML
+ */
+
+#ifdef CONFIG_PPC_RTAS
+ /* Non-lpar has additional take/give timebase */
+ if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
+ smp_ops->give_timebase = rtas_give_timebase;
+ smp_ops->take_timebase = rtas_take_timebase;
+ }
+#endif /* CONFIG_PPC_RTAS */
+
+#ifdef CONFIG_HOTPLUG_CPU
+ ppc_md.cpu_die = pnv_smp_cpu_kill_self;
+#endif
+}
or pass the 'noresidual' option to the kernel.
If you are running a PReP system, say Y here, otherwise say N.
-
-config PROC_PREPRESIDUAL
- bool "Support for reading of PReP Residual Data in /proc"
- depends on PREP_RESIDUAL && PROC_FS
- help
- Enabling this option will create a /proc/residual file which allows
- you to get at the residual data on PReP systems. You will need a tool
- (lsresidual) to parse it. If you aren't on a PReP system, you don't
- want this.
profiling support of the Cell processor with programs like
oprofile and perfmon2, then say Y or M, otherwise say N.
+config PS3GELIC_UDBG
+ bool "PS3 udbg output via UDP broadcasts on Ethernet"
+ depends on PPC_PS3
+ help
+ Enables udbg early debugging output by sending broadcast UDP
+ via the Ethernet port (UDP port number 18194).
+
+ This driver uses a trivial implementation and is independent
+ from the main network driver.
+
+ If in doubt, say N here.
+
endmenu
obj-y += interrupt.o exports.o os-area.o
obj-y += system-bus.o
+obj-$(CONFIG_PS3GELIC_UDBG) += gelic_udbg.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_SPU_BASE) += spu.o
obj-y += device-init.o
spin_lock_init(&dev.lock);
- res = request_irq(irq, ps3_notification_interrupt, IRQF_DISABLED,
+ res = request_irq(irq, ps3_notification_interrupt, 0,
"ps3_notification", &dev);
if (res) {
pr_err("%s:%u: request_irq failed %d\n", __func__, __LINE__,
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/module.h>
-
#define LV1_CALL(name, in, out, num) \
extern s64 _lv1_##name(LV1_##in##_IN_##out##_OUT_ARG_DECL); \
EXPORT_SYMBOL(_lv1_##name);
--- /dev/null
+/*
+ * udbg debug output routine via GELIC UDP broadcasts
+ *
+ * Copyright (C) 2007 Sony Computer Entertainment Inc.
+ * Copyright 2006, 2007 Sony Corporation
+ * Copyright (C) 2010 Hector Martin <hector@marcansoft.com>
+ * Copyright (C) 2011 Andre Heider <a.heider@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+#include <asm/io.h>
+#include <asm/udbg.h>
+#include <asm/lv1call.h>
+
+#define GELIC_BUS_ID 1
+#define GELIC_DEVICE_ID 0
+#define GELIC_DEBUG_PORT 18194
+#define GELIC_MAX_MESSAGE_SIZE 1000
+
+#define GELIC_LV1_GET_MAC_ADDRESS 1
+#define GELIC_LV1_GET_VLAN_ID 4
+#define GELIC_LV1_VLAN_TX_ETHERNET_0 2
+
+#define GELIC_DESCR_DMA_STAT_MASK 0xf0000000
+#define GELIC_DESCR_DMA_CARDOWNED 0xa0000000
+
+#define GELIC_DESCR_TX_DMA_IKE 0x00080000
+#define GELIC_DESCR_TX_DMA_NO_CHKSUM 0x00000000
+#define GELIC_DESCR_TX_DMA_FRAME_TAIL 0x00040000
+
+#define GELIC_DESCR_DMA_CMD_NO_CHKSUM (GELIC_DESCR_DMA_CARDOWNED | \
+ GELIC_DESCR_TX_DMA_IKE | \
+ GELIC_DESCR_TX_DMA_NO_CHKSUM)
+
+static u64 bus_addr;
+
+struct gelic_descr {
+ /* as defined by the hardware */
+ __be32 buf_addr;
+ __be32 buf_size;
+ __be32 next_descr_addr;
+ __be32 dmac_cmd_status;
+ __be32 result_size;
+ __be32 valid_size; /* all zeroes for tx */
+ __be32 data_status;
+ __be32 data_error; /* all zeroes for tx */
+} __attribute__((aligned(32)));
+
+struct debug_block {
+ struct gelic_descr descr;
+ u8 pkt[1520];
+} __packed;
+
+struct ethhdr {
+ u8 dest[6];
+ u8 src[6];
+ u16 type;
+} __packed;
+
+struct vlantag {
+ u16 vlan;
+ u16 subtype;
+} __packed;
+
+struct iphdr {
+ u8 ver_len;
+ u8 dscp_ecn;
+ u16 total_length;
+ u16 ident;
+ u16 frag_off_flags;
+ u8 ttl;
+ u8 proto;
+ u16 checksum;
+ u32 src;
+ u32 dest;
+} __packed;
+
+struct udphdr {
+ u16 src;
+ u16 dest;
+ u16 len;
+ u16 checksum;
+} __packed;
+
+static __iomem struct ethhdr *h_eth;
+static __iomem struct vlantag *h_vlan;
+static __iomem struct iphdr *h_ip;
+static __iomem struct udphdr *h_udp;
+
+static __iomem char *pmsg;
+static __iomem char *pmsgc;
+
+static __iomem struct debug_block dbg __attribute__((aligned(32)));
+
+static int header_size;
+
+static void map_dma_mem(int bus_id, int dev_id, void *start, size_t len,
+ u64 *real_bus_addr)
+{
+ s64 result;
+ u64 real_addr = ((u64)start) & 0x0fffffffffffffffUL;
+ u64 real_end = real_addr + len;
+ u64 map_start = real_addr & ~0xfff;
+ u64 map_end = (real_end + 0xfff) & ~0xfff;
+ u64 bus_addr = 0;
+
+ u64 flags = 0xf800000000000000UL;
+
+ result = lv1_allocate_device_dma_region(bus_id, dev_id,
+ map_end - map_start, 12, 0,
+ &bus_addr);
+ if (result)
+ lv1_panic(0);
+
+ result = lv1_map_device_dma_region(bus_id, dev_id, map_start,
+ bus_addr, map_end - map_start,
+ flags);
+ if (result)
+ lv1_panic(0);
+
+ *real_bus_addr = bus_addr + real_addr - map_start;
+}
+
+static int unmap_dma_mem(int bus_id, int dev_id, u64 bus_addr, size_t len)
+{
+ s64 result;
+ u64 real_bus_addr;
+
+ real_bus_addr = bus_addr & ~0xfff;
+ len += bus_addr - real_bus_addr;
+ len = (len + 0xfff) & ~0xfff;
+
+ result = lv1_unmap_device_dma_region(bus_id, dev_id, real_bus_addr,
+ len);
+ if (result)
+ return result;
+
+ return lv1_free_device_dma_region(bus_id, dev_id, real_bus_addr);
+}
+
+static void gelic_debug_init(void)
+{
+ s64 result;
+ u64 v2;
+ u64 mac;
+ u64 vlan_id;
+
+ result = lv1_open_device(GELIC_BUS_ID, GELIC_DEVICE_ID, 0);
+ if (result)
+ lv1_panic(0);
+
+ map_dma_mem(GELIC_BUS_ID, GELIC_DEVICE_ID, &dbg, sizeof(dbg),
+ &bus_addr);
+
+ memset(&dbg, 0, sizeof(dbg));
+
+ dbg.descr.buf_addr = bus_addr + offsetof(struct debug_block, pkt);
+
+ wmb();
+
+ result = lv1_net_control(GELIC_BUS_ID, GELIC_DEVICE_ID,
+ GELIC_LV1_GET_MAC_ADDRESS, 0, 0, 0,
+ &mac, &v2);
+ if (result)
+ lv1_panic(0);
+
+ mac <<= 16;
+
+ h_eth = (struct ethhdr *)dbg.pkt;
+
+ memset(&h_eth->dest, 0xff, 6);
+ memcpy(&h_eth->src, &mac, 6);
+
+ header_size = sizeof(struct ethhdr);
+
+ result = lv1_net_control(GELIC_BUS_ID, GELIC_DEVICE_ID,
+ GELIC_LV1_GET_VLAN_ID,
+ GELIC_LV1_VLAN_TX_ETHERNET_0, 0, 0,
+ &vlan_id, &v2);
+ if (!result) {
+ h_eth->type = 0x8100;
+
+ header_size += sizeof(struct vlantag);
+ h_vlan = (struct vlantag *)(h_eth + 1);
+ h_vlan->vlan = vlan_id;
+ h_vlan->subtype = 0x0800;
+ h_ip = (struct iphdr *)(h_vlan + 1);
+ } else {
+ h_eth->type = 0x0800;
+ h_ip = (struct iphdr *)(h_eth + 1);
+ }
+
+ header_size += sizeof(struct iphdr);
+ h_ip->ver_len = 0x45;
+ h_ip->ttl = 10;
+ h_ip->proto = 0x11;
+ h_ip->src = 0x00000000;
+ h_ip->dest = 0xffffffff;
+
+ header_size += sizeof(struct udphdr);
+ h_udp = (struct udphdr *)(h_ip + 1);
+ h_udp->src = GELIC_DEBUG_PORT;
+ h_udp->dest = GELIC_DEBUG_PORT;
+
+ pmsgc = pmsg = (char *)(h_udp + 1);
+}
+
+static void gelic_debug_shutdown(void)
+{
+ if (bus_addr)
+ unmap_dma_mem(GELIC_BUS_ID, GELIC_DEVICE_ID,
+ bus_addr, sizeof(dbg));
+ lv1_close_device(GELIC_BUS_ID, GELIC_DEVICE_ID);
+}
+
+static void gelic_sendbuf(int msgsize)
+{
+ u16 *p;
+ u32 sum;
+ int i;
+
+ dbg.descr.buf_size = header_size + msgsize;
+ h_ip->total_length = msgsize + sizeof(struct udphdr) +
+ sizeof(struct iphdr);
+ h_udp->len = msgsize + sizeof(struct udphdr);
+
+ h_ip->checksum = 0;
+ sum = 0;
+ p = (u16 *)h_ip;
+ for (i = 0; i < 5; i++)
+ sum += *p++;
+ h_ip->checksum = ~(sum + (sum >> 16));
+
+ dbg.descr.dmac_cmd_status = GELIC_DESCR_DMA_CMD_NO_CHKSUM |
+ GELIC_DESCR_TX_DMA_FRAME_TAIL;
+ dbg.descr.result_size = 0;
+ dbg.descr.data_status = 0;
+
+ wmb();
+
+ lv1_net_start_tx_dma(GELIC_BUS_ID, GELIC_DEVICE_ID, bus_addr, 0);
+
+ while ((dbg.descr.dmac_cmd_status & GELIC_DESCR_DMA_STAT_MASK) ==
+ GELIC_DESCR_DMA_CARDOWNED)
+ cpu_relax();
+}
+
+static void ps3gelic_udbg_putc(char ch)
+{
+ *pmsgc++ = ch;
+ if (ch == '\n' || (pmsgc-pmsg) >= GELIC_MAX_MESSAGE_SIZE) {
+ gelic_sendbuf(pmsgc-pmsg);
+ pmsgc = pmsg;
+ }
+}
+
+void __init udbg_init_ps3gelic(void)
+{
+ gelic_debug_init();
+ udbg_putc = ps3gelic_udbg_putc;
+}
+
+void udbg_shutdown_ps3gelic(void)
+{
+ udbg_putc = NULL;
+ gelic_debug_shutdown();
+}
+EXPORT_SYMBOL(udbg_shutdown_ps3gelic);
*/
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/irq.h>
#include <asm/machdep.h>
struct ps3_bmp bmp __attribute__ ((aligned (PS3_BMP_MINALIGN)));
u64 ppe_id;
u64 thread_id;
+ unsigned long ipi_mask;
};
static DEFINE_PER_CPU(struct ps3_private, ps3_private);
static void ps3_chip_eoi(struct irq_data *d)
{
const struct ps3_private *pd = irq_data_get_irq_chip_data(d);
- lv1_end_of_interrupt_ext(pd->ppe_id, pd->thread_id, d->irq);
+
+ /* non-IPIs are EOIed here. */
+
+ if (!test_bit(63 - d->irq, &pd->ipi_mask))
+ lv1_end_of_interrupt_ext(pd->ppe_id, pd->thread_id, d->irq);
}
/**
cpu, virq, pd->bmp.ipi_debug_brk_mask);
}
+void __init ps3_register_ipi_irq(unsigned int cpu, unsigned int virq)
+{
+ struct ps3_private *pd = &per_cpu(ps3_private, cpu);
+
+ set_bit(63 - virq, &pd->ipi_mask);
+
+ DBG("%s:%d: cpu %u, virq %u, ipi_mask %lxh\n", __func__, __LINE__,
+ cpu, virq, pd->ipi_mask);
+}
+
static unsigned int ps3_get_irq(void)
{
struct ps3_private *pd = &__get_cpu_var(ps3_private);
BUG();
}
#endif
+
+ /* IPIs are EOIed here. */
+
+ if (test_bit(63 - plug, &pd->ipi_mask))
+ lv1_end_of_interrupt_ext(pd->ppe_id, pd->thread_id, plug);
+
return plug;
}
*/
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/memory_hotplug.h>
#include <linux/memblock.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/fs.h>
#include <linux/syscalls.h>
+#include <linux/export.h>
#include <linux/ctype.h>
#include <linux/memblock.h>
#include <linux/of.h>
void ps3_init_IRQ(void);
void ps3_shutdown_IRQ(int cpu);
void __init ps3_register_ipi_debug_brk(unsigned int cpu, unsigned int virq);
+void __init ps3_register_ipi_irq(unsigned int cpu, unsigned int virq);
/* smp */
enum ps3_bus_type *bus_type)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_PME,
make_first_field("bus", bus_index),
unsigned int *num_dev)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_PME,
make_first_field("bus", bus_index),
unsigned int dev_index, enum ps3_dev_type *dev_type)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_PME,
make_first_field("bus", bus_index),
enum ps3_interrupt_type *intr_type, unsigned int *interrupt_id)
{
int result;
- u64 v1;
- u64 v2;
+ u64 v1 = 0;
+ u64 v2 = 0;
result = read_node(PS3_LPAR_ID_PME,
make_first_field("bus", bus_index),
enum ps3_reg_type *reg_type)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_PME,
make_first_field("bus", bus_index),
unsigned int dev_index, unsigned int *num_regions)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_PME,
make_first_field("bus", bus_index),
unsigned int *region_id)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_PME,
make_first_field("bus", bus_index),
int ps3_repository_read_num_spu_reserved(unsigned int *num_spu_reserved)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_CURRENT,
make_first_field("bi", 0),
int ps3_repository_read_num_spu_resource_id(unsigned int *num_resource_id)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_CURRENT,
make_first_field("bi", 0),
enum ps3_spu_resource_type *resource_type, unsigned int *resource_id)
{
int result;
- u64 v1;
- u64 v2;
+ u64 v1 = 0;
+ u64 v2 = 0;
result = read_node(PS3_LPAR_ID_CURRENT,
make_first_field("bi", 0),
int ps3_repository_read_boot_dat_size(unsigned int *size)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_CURRENT,
make_first_field("bi", 0),
int ps3_repository_read_vuart_av_port(unsigned int *port)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_CURRENT,
make_first_field("bi", 0),
int ps3_repository_read_vuart_sysmgr_port(unsigned int *port)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_CURRENT,
make_first_field("bi", 0),
int ps3_repository_read_num_be(unsigned int *num_be)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_PME,
make_first_field("ben", 0),
#include <linux/fs.h>
#include <linux/root_dev.h>
#include <linux/console.h>
+#include <linux/export.h>
#include <linux/bootmem.h>
#include <asm/machdep.h>
static int ps3_smp_probe(void)
{
- return 2;
-}
+ int cpu;
-static void __init ps3_smp_setup_cpu(int cpu)
-{
- int result;
- unsigned int *virqs = per_cpu(ps3_ipi_virqs, cpu);
- int i;
+ for (cpu = 0; cpu < 2; cpu++) {
+ int result;
+ unsigned int *virqs = per_cpu(ps3_ipi_virqs, cpu);
+ int i;
- DBG(" -> %s:%d: (%d)\n", __func__, __LINE__, cpu);
+ DBG(" -> %s:%d: (%d)\n", __func__, __LINE__, cpu);
- /*
- * Check assumptions on ps3_ipi_virqs[] indexing. If this
- * check fails, then a different mapping of PPC_MSG_
- * to index needs to be setup.
- */
+ /*
+ * Check assumptions on ps3_ipi_virqs[] indexing. If this
+ * check fails, then a different mapping of PPC_MSG_
+ * to index needs to be setup.
+ */
- BUILD_BUG_ON(PPC_MSG_CALL_FUNCTION != 0);
- BUILD_BUG_ON(PPC_MSG_RESCHEDULE != 1);
- BUILD_BUG_ON(PPC_MSG_CALL_FUNC_SINGLE != 2);
- BUILD_BUG_ON(PPC_MSG_DEBUGGER_BREAK != 3);
+ BUILD_BUG_ON(PPC_MSG_CALL_FUNCTION != 0);
+ BUILD_BUG_ON(PPC_MSG_RESCHEDULE != 1);
+ BUILD_BUG_ON(PPC_MSG_CALL_FUNC_SINGLE != 2);
+ BUILD_BUG_ON(PPC_MSG_DEBUGGER_BREAK != 3);
- for (i = 0; i < MSG_COUNT; i++) {
- result = ps3_event_receive_port_setup(cpu, &virqs[i]);
+ for (i = 0; i < MSG_COUNT; i++) {
+ result = ps3_event_receive_port_setup(cpu, &virqs[i]);
- if (result)
- continue;
+ if (result)
+ continue;
- DBG("%s:%d: (%d, %d) => virq %u\n",
- __func__, __LINE__, cpu, i, virqs[i]);
+ DBG("%s:%d: (%d, %d) => virq %u\n",
+ __func__, __LINE__, cpu, i, virqs[i]);
- result = smp_request_message_ipi(virqs[i], i);
+ result = smp_request_message_ipi(virqs[i], i);
- if (result)
- virqs[i] = NO_IRQ;
- }
+ if (result)
+ virqs[i] = NO_IRQ;
+ else
+ ps3_register_ipi_irq(cpu, virqs[i]);
+ }
- ps3_register_ipi_debug_brk(cpu, virqs[PPC_MSG_DEBUGGER_BREAK]);
+ ps3_register_ipi_debug_brk(cpu, virqs[PPC_MSG_DEBUGGER_BREAK]);
- DBG(" <- %s:%d: (%d)\n", __func__, __LINE__, cpu);
+ DBG(" <- %s:%d: (%d)\n", __func__, __LINE__, cpu);
+ }
+
+ return 2;
}
void ps3_smp_cleanup_cpu(int cpu)
.probe = ps3_smp_probe,
.message_pass = ps3_smp_message_pass,
.kick_cpu = smp_generic_kick_cpu,
- .setup_cpu = ps3_smp_setup_cpu,
};
void smp_init_ps3(void)
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/mmzone.h>
+#include <linux/export.h>
#include <linux/io.h>
#include <linux/mm.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/slab.h>
return mask >= DMA_BIT_MASK(32);
}
+static u64 ps3_dma_get_required_mask(struct device *_dev)
+{
+ return DMA_BIT_MASK(32);
+}
+
static struct dma_map_ops ps3_sb_dma_ops = {
.alloc_coherent = ps3_alloc_coherent,
.free_coherent = ps3_free_coherent,
.map_sg = ps3_sb_map_sg,
.unmap_sg = ps3_sb_unmap_sg,
.dma_supported = ps3_dma_supported,
+ .get_required_mask = ps3_dma_get_required_mask,
.map_page = ps3_sb_map_page,
.unmap_page = ps3_unmap_page,
};
.map_sg = ps3_ioc0_map_sg,
.unmap_sg = ps3_ioc0_unmap_sg,
.dma_supported = ps3_dma_supported,
+ .get_required_mask = ps3_dma_get_required_mask,
.map_page = ps3_ioc0_map_page,
.unmap_page = ps3_unmap_page,
};
select PPC_UDBG_16550
select PPC_NATIVE
select PPC_PCI_CHOICE if EXPERT
+ select ZLIB_DEFLATE
default y
config PPC_SPLPAR
dlpar_free_one_cc_node(dn);
}
+#define COMPLETE 0
#define NEXT_SIBLING 1
#define NEXT_CHILD 2
#define NEXT_PROPERTY 3
spin_unlock(&rtas_data_buf_lock);
switch (rc) {
+ case COMPLETE:
+ break;
+
case NEXT_SIBLING:
dn = dlpar_parse_cc_node(ccwa);
if (!dn)
*/
#include <linux/delay.h>
+#include <linux/sched.h> /* for init_mm */
#include <linux/init.h>
#include <linux/list.h>
#include <linux/pci.h>
#include <linux/rbtree.h>
#include <linux/seq_file.h>
#include <linux/spinlock.h>
+#include <linux/export.h>
#include <linux/of.h>
#include <linux/atomic.h>
static int __init eeh_init_proc(void)
{
if (machine_is(pseries))
- proc_create("ppc64/eeh", 0, NULL, &proc_eeh_operations);
+ proc_create("powerpc/eeh", 0, NULL, &proc_eeh_operations);
return 0;
}
__initcall(eeh_init_proc);
#include <linux/delay.h>
#include <linux/list.h>
#include <linux/mutex.h>
+#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
* Send comments and feedback to Linas Vepstas <linas@austin.ibm.com>
*/
#include <linux/pci.h>
+#include <linux/stat.h>
#include <asm/ppc-pci.h>
#include <asm/pci-bridge.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
+#include <linux/sched.h> /* for idle_task_exit */
#include <linux/cpu.h>
#include <asm/system.h>
#include <asm/prom.h>
*/
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
+#include <linux/errno.h>
#include <asm/hvcall.h>
#include <asm/hvconsole.h>
#include "plpar_wrappers.h"
#include <linux/errno.h>
#include <linux/slab.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/of.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/spinlock.h>
+#include <linux/sched.h> /* for show_stack */
#include <linux/string.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
if (ret) {
dev_info(&dev->dev, "failed to map direct window for %s: %d\n",
dn->full_name, ret);
- goto out_clear_window;
+ goto out_free_window;
}
ret = prom_add_property(pdn, win64);
if (ret) {
dev_err(&dev->dev, "unable to add dma window property for %s: %d",
pdn->full_name, ret);
- goto out_clear_window;
+ goto out_free_window;
}
window->device = pdn;
dma_addr = of_read_number(&create.addr_hi, 2);
goto out_unlock;
+out_free_window:
+ kfree(window);
+
out_clear_window:
remove_ddw(pdn);
return 0;
}
+static u64 dma_get_required_mask_pSeriesLP(struct device *dev)
+{
+ if (!dev->dma_mask)
+ return 0;
+
+ if (!disable_ddw && dev_is_pci(dev)) {
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct device_node *dn;
+
+ dn = pci_device_to_OF_node(pdev);
+
+ /* search upwards for ibm,dma-window */
+ for (; dn && PCI_DN(dn) && !PCI_DN(dn)->iommu_table;
+ dn = dn->parent)
+ if (of_get_property(dn, "ibm,dma-window", NULL))
+ break;
+ /* if there is a ibm,ddw-applicable property require 64 bits */
+ if (dn && PCI_DN(dn) &&
+ of_get_property(dn, "ibm,ddw-applicable", NULL))
+ return DMA_BIT_MASK(64);
+ }
+
+ return dma_iommu_ops.get_required_mask(dev);
+}
+
#else /* CONFIG_PCI */
#define pci_dma_bus_setup_pSeries NULL
#define pci_dma_dev_setup_pSeries NULL
#define pci_dma_bus_setup_pSeriesLP NULL
#define pci_dma_dev_setup_pSeriesLP NULL
#define dma_set_mask_pSeriesLP NULL
+#define dma_get_required_mask_pSeriesLP NULL
#endif /* !CONFIG_PCI */
static int iommu_mem_notifier(struct notifier_block *nb, unsigned long action,
ppc_md.pci_dma_bus_setup = pci_dma_bus_setup_pSeriesLP;
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_pSeriesLP;
ppc_md.dma_set_mask = dma_set_mask_pSeriesLP;
+ ppc_md.dma_get_required_mask = dma_get_required_mask_pSeriesLP;
} else {
ppc_md.tce_build = tce_build_pSeries;
ppc_md.tce_free = tce_free_pSeries;
#include <linux/kernel.h>
#include <linux/dma-mapping.h>
#include <linux/console.h>
+#include <linux/export.h>
#include <asm/processor.h>
#include <asm/mmu.h>
#include <asm/page.h>
#include <linux/kernel.h>
#include <linux/kobject.h>
#include <linux/smp.h>
+#include <linux/stat.h>
#include <linux/completion.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/kmsg_dump.h>
+#include <linux/ctype.h>
+#include <linux/zlib.h>
#include <asm/uaccess.h>
#include <asm/nvram.h>
#include <asm/rtas.h>
#define NVRAM_RTAS_READ_TIMEOUT 5 /* seconds */
static unsigned long last_unread_rtas_event; /* timestamp */
-/* We preallocate oops_buf during init to avoid kmalloc during oops/panic. */
-static char *oops_buf;
+/*
+ * For capturing and compressing an oops or panic report...
+
+ * big_oops_buf[] holds the uncompressed text we're capturing.
+ *
+ * oops_buf[] holds the compressed text, preceded by a prefix.
+ * The prefix is just a u16 holding the length of the compressed* text.
+ * (*Or uncompressed, if compression fails.) oops_buf[] gets written
+ * to NVRAM.
+ *
+ * oops_len points to the prefix. oops_data points to the compressed text.
+ *
+ * +- oops_buf
+ * | +- oops_data
+ * v v
+ * +------------+-----------------------------------------------+
+ * | length | text |
+ * | (2 bytes) | (oops_data_sz bytes) |
+ * +------------+-----------------------------------------------+
+ * ^
+ * +- oops_len
+ *
+ * We preallocate these buffers during init to avoid kmalloc during oops/panic.
+ */
+static size_t big_oops_buf_sz;
+static char *big_oops_buf, *oops_buf;
+static u16 *oops_len;
+static char *oops_data;
+static size_t oops_data_sz;
+
+/* Compression parameters */
+#define COMPR_LEVEL 6
+#define WINDOW_BITS 12
+#define MEM_LEVEL 4
+static struct z_stream_s stream;
static ssize_t pSeries_nvram_read(char *buf, size_t count, loff_t *index)
{
sizeof(rtas_log_partition));
}
oops_buf = kmalloc(oops_log_partition.size, GFP_KERNEL);
+ if (!oops_buf) {
+ pr_err("nvram: No memory for %s partition\n",
+ oops_log_partition.name);
+ return;
+ }
+ oops_len = (u16*) oops_buf;
+ oops_data = oops_buf + sizeof(u16);
+ oops_data_sz = oops_log_partition.size - sizeof(u16);
+
+ /*
+ * Figure compression (preceded by elimination of each line's <n>
+ * severity prefix) will reduce the oops/panic report to at most
+ * 45% of its original size.
+ */
+ big_oops_buf_sz = (oops_data_sz * 100) / 45;
+ big_oops_buf = kmalloc(big_oops_buf_sz, GFP_KERNEL);
+ if (big_oops_buf) {
+ stream.workspace = kmalloc(zlib_deflate_workspacesize(
+ WINDOW_BITS, MEM_LEVEL), GFP_KERNEL);
+ if (!stream.workspace) {
+ pr_err("nvram: No memory for compression workspace; "
+ "skipping compression of %s partition data\n",
+ oops_log_partition.name);
+ kfree(big_oops_buf);
+ big_oops_buf = NULL;
+ }
+ } else {
+ pr_err("No memory for uncompressed %s data; "
+ "skipping compression\n", oops_log_partition.name);
+ stream.workspace = NULL;
+ }
+
rc = kmsg_dump_register(&nvram_kmsg_dumper);
if (rc != 0) {
pr_err("nvram: kmsg_dump_register() failed; returned %d\n", rc);
kfree(oops_buf);
- return;
+ kfree(big_oops_buf);
+ kfree(stream.workspace);
}
}
NVRAM_RTAS_READ_TIMEOUT);
}
-/* our kmsg_dump callback */
+/* Squeeze out each line's <n> severity prefix. */
+static size_t elide_severities(char *buf, size_t len)
+{
+ char *in, *out, *buf_end = buf + len;
+ /* Assume a <n> at the very beginning marks the start of a line. */
+ int newline = 1;
+
+ in = out = buf;
+ while (in < buf_end) {
+ if (newline && in+3 <= buf_end &&
+ *in == '<' && isdigit(in[1]) && in[2] == '>') {
+ in += 3;
+ newline = 0;
+ } else {
+ newline = (*in == '\n');
+ *out++ = *in++;
+ }
+ }
+ return out - buf;
+}
+
+/* Derived from logfs_compress() */
+static int nvram_compress(const void *in, void *out, size_t inlen,
+ size_t outlen)
+{
+ int err, ret;
+
+ ret = -EIO;
+ err = zlib_deflateInit2(&stream, COMPR_LEVEL, Z_DEFLATED, WINDOW_BITS,
+ MEM_LEVEL, Z_DEFAULT_STRATEGY);
+ if (err != Z_OK)
+ goto error;
+
+ stream.next_in = in;
+ stream.avail_in = inlen;
+ stream.total_in = 0;
+ stream.next_out = out;
+ stream.avail_out = outlen;
+ stream.total_out = 0;
+
+ err = zlib_deflate(&stream, Z_FINISH);
+ if (err != Z_STREAM_END)
+ goto error;
+
+ err = zlib_deflateEnd(&stream);
+ if (err != Z_OK)
+ goto error;
+
+ if (stream.total_out >= stream.total_in)
+ goto error;
+
+ ret = stream.total_out;
+error:
+ return ret;
+}
+
+/* Compress the text from big_oops_buf into oops_buf. */
+static int zip_oops(size_t text_len)
+{
+ int zipped_len = nvram_compress(big_oops_buf, oops_data, text_len,
+ oops_data_sz);
+ if (zipped_len < 0) {
+ pr_err("nvram: compression failed; returned %d\n", zipped_len);
+ pr_err("nvram: logging uncompressed oops/panic report\n");
+ return -1;
+ }
+ *oops_len = (u16) zipped_len;
+ return 0;
+}
+
+/*
+ * This is our kmsg_dump callback, called after an oops or panic report
+ * has been written to the printk buffer. We want to capture as much
+ * of the printk buffer as possible. First, capture as much as we can
+ * that we think will compress sufficiently to fit in the lnx,oops-log
+ * partition. If that's too much, go back and capture uncompressed text.
+ */
static void oops_to_nvram(struct kmsg_dumper *dumper,
enum kmsg_dump_reason reason,
const char *old_msgs, unsigned long old_len,
static unsigned int oops_count = 0;
static bool panicking = false;
size_t text_len;
+ unsigned int err_type = ERR_TYPE_KERNEL_PANIC_GZ;
+ int rc = -1;
switch (reason) {
case KMSG_DUMP_RESTART:
if (clobbering_unread_rtas_event())
return;
- text_len = capture_last_msgs(old_msgs, old_len, new_msgs, new_len,
- oops_buf, oops_log_partition.size);
+ if (big_oops_buf) {
+ text_len = capture_last_msgs(old_msgs, old_len,
+ new_msgs, new_len, big_oops_buf, big_oops_buf_sz);
+ text_len = elide_severities(big_oops_buf, text_len);
+ rc = zip_oops(text_len);
+ }
+ if (rc != 0) {
+ text_len = capture_last_msgs(old_msgs, old_len,
+ new_msgs, new_len, oops_data, oops_data_sz);
+ err_type = ERR_TYPE_KERNEL_PANIC;
+ *oops_len = (u16) text_len;
+ }
+
(void) nvram_write_os_partition(&oops_log_partition, oops_buf,
- (int) text_len, ERR_TYPE_KERNEL_PANIC, ++oops_count);
+ (int) (sizeof(*oops_len) + *oops_len), err_type, ++oops_count);
}
*/
#include <linux/pci.h>
+#include <linux/export.h>
#include <asm/pci-bridge.h>
#include <asm/ppc-pci.h>
#include <asm/firmware.h>
#ifndef _PSERIES_PLPAR_WRAPPERS_H
#define _PSERIES_PLPAR_WRAPPERS_H
+#include <linux/string.h>
+
#include <asm/hvcall.h>
+#include <asm/paca.h>
#include <asm/page.h>
/* Get state of physical CPU from query_cpu_stopped */
#include <linux/pci.h>
#include <linux/utsname.h>
#include <linux/adb.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/seq_file.h>
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/suspend.h>
+#include <linux/stat.h>
#include <asm/firmware.h>
#include <asm/hvcall.h>
#include <asm/machdep.h>
config PPC_WSP
bool
+ select PPC_A2
+ select PPC_SCOM
+ select PPC_XICS
+ select PPC_ICP_NATIVE
+ select PCI
+ select PPC_IO_WORKAROUNDS if PCI
+ select PPC_INDIRECT_PIO if PCI
default n
menu "WSP platform selection"
config PPC_PSR2
bool "PSR-2 platform"
- select PPC_A2
select GENERIC_TBSYNC
- select PPC_SCOM
select EPAPR_BOOT
select PPC_WSP
- select PPC_XICS
- select PPC_ICP_NATIVE
default y
endmenu
config PPC_A2_DD2
bool "Support for DD2 based A2/WSP systems"
depends on PPC_A2
-
-config WORKAROUND_ERRATUM_463
- depends on PPC_A2_DD2
- bool "Workaround erratum 463"
- default y
obj-$(CONFIG_PPC_PSR2) += psr2.o opb_pic.o
obj-$(CONFIG_PPC_WSP) += scom_wsp.o
obj-$(CONFIG_SMP) += smp.o scom_smp.o
+obj-$(CONFIG_PCI) += wsp_pci.o
+obj-$(CONFIG_PCI_MSI) += msi.o
\ No newline at end of file
/* We need to patch our irq chip's EOI to point to the right ICP */
wsp_irq_chip.irq_eoi = icp_ops->eoi;
}
+
+#ifdef CONFIG_PCI_MSI
+static void wsp_ics_msi_unmask_irq(struct irq_data *d)
+{
+ wsp_chip_unmask_irq(d);
+ unmask_msi_irq(d);
+}
+
+static unsigned int wsp_ics_msi_startup(struct irq_data *d)
+{
+ wsp_ics_msi_unmask_irq(d);
+ return 0;
+}
+
+static void wsp_ics_msi_mask_irq(struct irq_data *d)
+{
+ mask_msi_irq(d);
+ wsp_chip_mask_irq(d);
+}
+
+/*
+ * we do it this way because we reassinge default EOI handling in
+ * irq_init() above
+ */
+static void wsp_ics_eoi(struct irq_data *data)
+{
+ wsp_irq_chip.irq_eoi(data);
+}
+
+static struct irq_chip wsp_ics_msi = {
+ .name = "WSP ICS MSI",
+ .irq_startup = wsp_ics_msi_startup,
+ .irq_mask = wsp_ics_msi_mask_irq,
+ .irq_unmask = wsp_ics_msi_unmask_irq,
+ .irq_eoi = wsp_ics_eoi,
+ .irq_set_affinity = wsp_chip_set_affinity
+};
+
+void wsp_ics_set_msi_chip(unsigned int irq)
+{
+ irq_set_chip(irq, &wsp_ics_msi);
+}
+
+void wsp_ics_set_std_chip(unsigned int irq)
+{
+ irq_set_chip(irq, &wsp_irq_chip);
+}
+#endif /* CONFIG_PCI_MSI */
extern int wsp_ics_alloc_irq(struct device_node *dn, int num);
extern void wsp_ics_free_irq(struct device_node *dn, unsigned int irq);
+#ifdef CONFIG_PCI_MSI
+extern void wsp_ics_set_msi_chip(unsigned int irq);
+extern void wsp_ics_set_std_chip(unsigned int irq);
+#endif /* CONFIG_PCI_MSI */
+
#endif /* __ICS_H */
--- /dev/null
+/*
+ * Copyright 2011 Michael Ellerman, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/msi.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include "msi.h"
+#include "ics.h"
+#include "wsp_pci.h"
+
+/* Magic addresses for 32 & 64-bit MSIs with hardcoded MVE 0 */
+#define MSI_ADDR_32 0xFFFF0000ul
+#define MSI_ADDR_64 0x1000000000000000ul
+
+int wsp_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+{
+ struct pci_controller *phb;
+ struct msi_desc *entry;
+ struct msi_msg msg;
+ unsigned int virq;
+ int hwirq;
+
+ phb = pci_bus_to_host(dev->bus);
+ if (!phb)
+ return -ENOENT;
+
+ entry = list_first_entry(&dev->msi_list, struct msi_desc, list);
+ if (entry->msi_attrib.is_64) {
+ msg.address_lo = 0;
+ msg.address_hi = MSI_ADDR_64 >> 32;
+ } else {
+ msg.address_lo = MSI_ADDR_32;
+ msg.address_hi = 0;
+ }
+
+ list_for_each_entry(entry, &dev->msi_list, list) {
+ hwirq = wsp_ics_alloc_irq(phb->dn, 1);
+ if (hwirq < 0) {
+ dev_warn(&dev->dev, "wsp_msi: hwirq alloc failed!\n");
+ return hwirq;
+ }
+
+ virq = irq_create_mapping(NULL, hwirq);
+ if (virq == NO_IRQ) {
+ dev_warn(&dev->dev, "wsp_msi: virq alloc failed!\n");
+ return -1;
+ }
+
+ dev_dbg(&dev->dev, "wsp_msi: allocated irq %#x/%#x\n",
+ hwirq, virq);
+
+ wsp_ics_set_msi_chip(virq);
+ irq_set_msi_desc(virq, entry);
+ msg.data = hwirq & XIVE_ADDR_MASK;
+ write_msi_msg(virq, &msg);
+ }
+
+ return 0;
+}
+
+void wsp_teardown_msi_irqs(struct pci_dev *dev)
+{
+ struct pci_controller *phb;
+ struct msi_desc *entry;
+ int hwirq;
+
+ phb = pci_bus_to_host(dev->bus);
+
+ dev_dbg(&dev->dev, "wsp_msi: tearing down msi irqs\n");
+
+ list_for_each_entry(entry, &dev->msi_list, list) {
+ if (entry->irq == NO_IRQ)
+ continue;
+
+ irq_set_msi_desc(entry->irq, NULL);
+ wsp_ics_set_std_chip(entry->irq);
+
+ hwirq = virq_to_hw(entry->irq);
+ /* In this order to avoid racing with irq_create_mapping() */
+ irq_dispose_mapping(entry->irq);
+ wsp_ics_free_irq(phb->dn, hwirq);
+ }
+}
+
+void wsp_setup_phb_msi(struct pci_controller *phb)
+{
+ /* Create a single MVE at offset 0 that matches everything */
+ out_be64(phb->cfg_data + PCIE_REG_IODA_ADDR, PCIE_REG_IODA_AD_TBL_MVT);
+ out_be64(phb->cfg_data + PCIE_REG_IODA_DATA0, 1ull << 63);
+
+ ppc_md.setup_msi_irqs = wsp_setup_msi_irqs;
+ ppc_md.teardown_msi_irqs = wsp_teardown_msi_irqs;
+}
--- /dev/null
+/*
+ * Copyright 2011 Michael Ellerman, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __WSP_MSI_H
+#define __WSP_MSI_H
+
+#ifdef CONFIG_PCI_MSI
+extern void wsp_setup_phb_msi(struct pci_controller *phb);
+#else
+static inline void wsp_setup_phb_msi(struct pci_controller *phb) { }
+#endif
+
+#endif /* __WSP_MSI_H */
#ifdef CONFIG_SMP
a2_setup_smp();
#endif
+#ifdef CONFIG_PCI
+ wsp_setup_pci();
+#endif
+
}
static int __init psr2_probe(void)
#include <asm/wsp.h>
+/* Devtree compatible strings for major devices */
+#define PCIE_COMPATIBLE "ibm,wsp-pciex"
+
extern void wsp_setup_pci(void);
extern void scom_init_wsp(void);
--- /dev/null
+/*
+ * Copyright 2010 Ben Herrenschmidt, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define DEBUG
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/debugfs.h>
+
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/ppc-pci.h>
+#include <asm/iommu.h>
+#include <asm/io-workarounds.h>
+
+#include "wsp.h"
+#include "wsp_pci.h"
+#include "msi.h"
+
+
+/* Max number of TVTs for one table. Only 32-bit tables can use
+ * multiple TVTs and so the max currently supported is thus 8
+ * since only 2G of DMA space is supported
+ */
+#define MAX_TABLE_TVT_COUNT 8
+
+struct wsp_dma_table {
+ struct list_head link;
+ struct iommu_table table;
+ struct wsp_phb *phb;
+ struct page *tces[MAX_TABLE_TVT_COUNT];
+};
+
+/* We support DMA regions from 0...2G in 32bit space (no support for
+ * 64-bit DMA just yet). Each device gets a separate TCE table (TVT
+ * entry) with validation enabled (though not supported by SimiCS
+ * just yet).
+ *
+ * To simplify things, we divide this 2G space into N regions based
+ * on the constant below which could be turned into a tunable eventually
+ *
+ * We then assign dynamically those regions to devices as they show up.
+ *
+ * We use a bitmap as an allocator for these.
+ *
+ * Tables are allocated/created dynamically as devices are discovered,
+ * multiple TVT entries are used if needed
+ *
+ * When 64-bit DMA support is added we should simply use a separate set
+ * of larger regions (the HW supports 64 TVT entries). We can
+ * additionally create a bypass region in 64-bit space for performances
+ * though that would have a cost in term of security.
+ *
+ * If you set NUM_DMA32_REGIONS to 1, then a single table is shared
+ * for all devices and bus/dev/fn validation is disabled
+ *
+ * Note that a DMA32 region cannot be smaller than 256M so the max
+ * supported here for now is 8. We don't yet support sharing regions
+ * between multiple devices so the max number of devices supported
+ * is MAX_TABLE_TVT_COUNT.
+ */
+#define NUM_DMA32_REGIONS 1
+
+struct wsp_phb {
+ struct pci_controller *hose;
+
+ /* Lock controlling access to the list of dma tables.
+ * It does -not- protect against dma_* operations on
+ * those tables, those should be stopped before an entry
+ * is removed from the list.
+ *
+ * The lock is also used for error handling operations
+ */
+ spinlock_t lock;
+ struct list_head dma_tables;
+ unsigned long dma32_map;
+ unsigned long dma32_base;
+ unsigned int dma32_num_regions;
+ unsigned long dma32_region_size;
+
+ /* Debugfs stuff */
+ struct dentry *ddir;
+
+ struct list_head all;
+};
+static LIST_HEAD(wsp_phbs);
+
+//#define cfg_debug(fmt...) pr_debug(fmt)
+#define cfg_debug(fmt...)
+
+
+static int wsp_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 *val)
+{
+ struct pci_controller *hose;
+ int suboff;
+ u64 addr;
+
+ hose = pci_bus_to_host(bus);
+ if (hose == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ if (offset >= 0x1000)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ addr = PCIE_REG_CA_ENABLE |
+ ((u64)bus->number) << PCIE_REG_CA_BUS_SHIFT |
+ ((u64)devfn) << PCIE_REG_CA_FUNC_SHIFT |
+ ((u64)offset & ~3) << PCIE_REG_CA_REG_SHIFT;
+ suboff = offset & 3;
+
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+
+ switch (len) {
+ case 1:
+ addr |= (0x8ul >> suboff) << PCIE_REG_CA_BE_SHIFT;
+ out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
+ *val = (in_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA)
+ >> (suboff << 3)) & 0xff;
+ cfg_debug("read 1 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%02x\n",
+ bus->number, devfn >> 3, devfn & 7,
+ offset, suboff, addr, *val);
+ break;
+ case 2:
+ addr |= (0xcul >> suboff) << PCIE_REG_CA_BE_SHIFT;
+ out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
+ *val = (in_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA)
+ >> (suboff << 3)) & 0xffff;
+ cfg_debug("read 2 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%04x\n",
+ bus->number, devfn >> 3, devfn & 7,
+ offset, suboff, addr, *val);
+ break;
+ default:
+ addr |= 0xful << PCIE_REG_CA_BE_SHIFT;
+ out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
+ *val = in_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA);
+ cfg_debug("read 4 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%08x\n",
+ bus->number, devfn >> 3, devfn & 7,
+ offset, suboff, addr, *val);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int wsp_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 val)
+{
+ struct pci_controller *hose;
+ int suboff;
+ u64 addr;
+
+ hose = pci_bus_to_host(bus);
+ if (hose == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ if (offset >= 0x1000)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ addr = PCIE_REG_CA_ENABLE |
+ ((u64)bus->number) << PCIE_REG_CA_BUS_SHIFT |
+ ((u64)devfn) << PCIE_REG_CA_FUNC_SHIFT |
+ ((u64)offset & ~3) << PCIE_REG_CA_REG_SHIFT;
+ suboff = offset & 3;
+
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ switch (len) {
+ case 1:
+ addr |= (0x8ul >> suboff) << PCIE_REG_CA_BE_SHIFT;
+ val <<= suboff << 3;
+ out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
+ out_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA, val);
+ cfg_debug("write 1 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%02x\n",
+ bus->number, devfn >> 3, devfn & 7,
+ offset, suboff, addr, val);
+ break;
+ case 2:
+ addr |= (0xcul >> suboff) << PCIE_REG_CA_BE_SHIFT;
+ val <<= suboff << 3;
+ out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
+ out_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA, val);
+ cfg_debug("write 2 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%04x\n",
+ bus->number, devfn >> 3, devfn & 7,
+ offset, suboff, addr, val);
+ break;
+ default:
+ addr |= 0xful << PCIE_REG_CA_BE_SHIFT;
+ out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
+ out_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA, val);
+ cfg_debug("write 4 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%08x\n",
+ bus->number, devfn >> 3, devfn & 7,
+ offset, suboff, addr, val);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops wsp_pcie_pci_ops =
+{
+ .read = wsp_pcie_read_config,
+ .write = wsp_pcie_write_config,
+};
+
+#define TCE_SHIFT 12
+#define TCE_PAGE_SIZE (1 << TCE_SHIFT)
+#define TCE_PCI_WRITE 0x2 /* write from PCI allowed */
+#define TCE_PCI_READ 0x1 /* read from PCI allowed */
+#define TCE_RPN_MASK 0x3fffffffffful /* 42-bit RPN (4K pages) */
+#define TCE_RPN_SHIFT 12
+
+//#define dma_debug(fmt...) pr_debug(fmt)
+#define dma_debug(fmt...)
+
+static int tce_build_wsp(struct iommu_table *tbl, long index, long npages,
+ unsigned long uaddr, enum dma_data_direction direction,
+ struct dma_attrs *attrs)
+{
+ struct wsp_dma_table *ptbl = container_of(tbl,
+ struct wsp_dma_table,
+ table);
+ u64 proto_tce;
+ u64 *tcep;
+ u64 rpn;
+
+ proto_tce = TCE_PCI_READ;
+#ifdef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS
+ proto_tce |= TCE_PCI_WRITE;
+#else
+ if (direction != DMA_TO_DEVICE)
+ proto_tce |= TCE_PCI_WRITE;
+#endif
+
+ /* XXX Make this faster by factoring out the page address for
+ * within a TCE table
+ */
+ while (npages--) {
+ /* We don't use it->base as the table can be scattered */
+ tcep = (u64 *)page_address(ptbl->tces[index >> 16]);
+ tcep += (index & 0xffff);
+
+ /* can't move this out since we might cross LMB boundary */
+ rpn = __pa(uaddr) >> TCE_SHIFT;
+ *tcep = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
+
+ dma_debug("[DMA] TCE %p set to 0x%016llx (dma addr: 0x%lx)\n",
+ tcep, *tcep, (tbl->it_offset + index) << IOMMU_PAGE_SHIFT);
+
+ uaddr += TCE_PAGE_SIZE;
+ index++;
+ }
+ return 0;
+}
+
+static void tce_free_wsp(struct iommu_table *tbl, long index, long npages)
+{
+ struct wsp_dma_table *ptbl = container_of(tbl,
+ struct wsp_dma_table,
+ table);
+#ifndef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS
+ struct pci_controller *hose = ptbl->phb->hose;
+#endif
+ u64 *tcep;
+
+ /* XXX Make this faster by factoring out the page address for
+ * within a TCE table. Also use line-kill option to kill multiple
+ * TCEs at once
+ */
+ while (npages--) {
+ /* We don't use it->base as the table can be scattered */
+ tcep = (u64 *)page_address(ptbl->tces[index >> 16]);
+ tcep += (index & 0xffff);
+ dma_debug("[DMA] TCE %p cleared\n", tcep);
+ *tcep = 0;
+#ifndef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS
+ /* Don't write there since it would pollute other MMIO accesses */
+ out_be64(hose->cfg_data + PCIE_REG_TCE_KILL,
+ PCIE_REG_TCEKILL_SINGLE | PCIE_REG_TCEKILL_PS_4K |
+ (__pa(tcep) & PCIE_REG_TCEKILL_ADDR_MASK));
+#endif
+ index++;
+ }
+}
+
+static struct wsp_dma_table *wsp_pci_create_dma32_table(struct wsp_phb *phb,
+ unsigned int region,
+ struct pci_dev *validate)
+{
+ struct pci_controller *hose = phb->hose;
+ unsigned long size = phb->dma32_region_size;
+ unsigned long addr = phb->dma32_region_size * region + phb->dma32_base;
+ struct wsp_dma_table *tbl;
+ int tvts_per_table, i, tvt, nid;
+ unsigned long flags;
+
+ nid = of_node_to_nid(phb->hose->dn);
+
+ /* Calculate how many TVTs are needed */
+ tvts_per_table = size / 0x10000000;
+ if (tvts_per_table == 0)
+ tvts_per_table = 1;
+
+ /* Calculate the base TVT index. We know all tables have the same
+ * size so we just do a simple multiply here
+ */
+ tvt = region * tvts_per_table;
+
+ pr_debug(" Region : %d\n", region);
+ pr_debug(" DMA range : 0x%08lx..0x%08lx\n", addr, addr + size - 1);
+ pr_debug(" Number of TVTs : %d\n", tvts_per_table);
+ pr_debug(" Base TVT : %d\n", tvt);
+ pr_debug(" Node : %d\n", nid);
+
+ tbl = kzalloc_node(sizeof(struct wsp_dma_table), GFP_KERNEL, nid);
+ if (!tbl)
+ return ERR_PTR(-ENOMEM);
+ tbl->phb = phb;
+
+ /* Create as many TVTs as needed, each represents 256M at most */
+ for (i = 0; i < tvts_per_table; i++) {
+ u64 tvt_data1, tvt_data0;
+
+ /* Allocate table. We use a 4K TCE size for now always so
+ * one table is always 8 * (258M / 4K) == 512K
+ */
+ tbl->tces[i] = alloc_pages_node(nid, GFP_KERNEL, get_order(0x80000));
+ if (tbl->tces[i] == NULL)
+ goto fail;
+ memset(page_address(tbl->tces[i]), 0, 0x80000);
+
+ pr_debug(" TCE table %d at : %p\n", i, page_address(tbl->tces[i]));
+
+ /* Table size. We currently set it to be the whole 256M region */
+ tvt_data0 = 2ull << IODA_TVT0_TCE_TABLE_SIZE_SHIFT;
+ /* IO page size set to 4K */
+ tvt_data1 = 1ull << IODA_TVT1_IO_PAGE_SIZE_SHIFT;
+ /* Shift in the address */
+ tvt_data0 |= __pa(page_address(tbl->tces[i])) << IODA_TVT0_TTA_SHIFT;
+
+ /* Validation stuff. We only validate fully bus/dev/fn for now
+ * one day maybe we can group devices but that isn't the case
+ * at the moment
+ */
+ if (validate) {
+ tvt_data0 |= IODA_TVT0_BUSNUM_VALID_MASK;
+ tvt_data0 |= validate->bus->number;
+ tvt_data1 |= IODA_TVT1_DEVNUM_VALID;
+ tvt_data1 |= ((u64)PCI_SLOT(validate->devfn))
+ << IODA_TVT1_DEVNUM_VALUE_SHIFT;
+ tvt_data1 |= IODA_TVT1_FUNCNUM_VALID;
+ tvt_data1 |= ((u64)PCI_FUNC(validate->devfn))
+ << IODA_TVT1_FUNCNUM_VALUE_SHIFT;
+ }
+
+ /* XX PE number is always 0 for now */
+
+ /* Program the values using the PHB lock */
+ spin_lock_irqsave(&phb->lock, flags);
+ out_be64(hose->cfg_data + PCIE_REG_IODA_ADDR,
+ (tvt + i) | PCIE_REG_IODA_AD_TBL_TVT);
+ out_be64(hose->cfg_data + PCIE_REG_IODA_DATA1, tvt_data1);
+ out_be64(hose->cfg_data + PCIE_REG_IODA_DATA0, tvt_data0);
+ spin_unlock_irqrestore(&phb->lock, flags);
+ }
+
+ /* Init bits and pieces */
+ tbl->table.it_blocksize = 16;
+ tbl->table.it_offset = addr >> IOMMU_PAGE_SHIFT;
+ tbl->table.it_size = size >> IOMMU_PAGE_SHIFT;
+
+ /*
+ * It's already blank but we clear it anyway.
+ * Consider an aditiona interface that makes cleaing optional
+ */
+ iommu_init_table(&tbl->table, nid);
+
+ list_add(&tbl->link, &phb->dma_tables);
+ return tbl;
+
+ fail:
+ pr_debug(" Failed to allocate a 256M TCE table !\n");
+ for (i = 0; i < tvts_per_table; i++)
+ if (tbl->tces[i])
+ __free_pages(tbl->tces[i], get_order(0x80000));
+ kfree(tbl);
+ return ERR_PTR(-ENOMEM);
+}
+
+static void __devinit wsp_pci_dma_dev_setup(struct pci_dev *pdev)
+{
+ struct dev_archdata *archdata = &pdev->dev.archdata;
+ struct pci_controller *hose = pci_bus_to_host(pdev->bus);
+ struct wsp_phb *phb = hose->private_data;
+ struct wsp_dma_table *table = NULL;
+ unsigned long flags;
+ int i;
+
+ /* Don't assign an iommu table to a bridge */
+ if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
+ return;
+
+ pr_debug("%s: Setting up DMA...\n", pci_name(pdev));
+
+ spin_lock_irqsave(&phb->lock, flags);
+
+ /* If only one region, check if it already exist */
+ if (phb->dma32_num_regions == 1) {
+ spin_unlock_irqrestore(&phb->lock, flags);
+ if (list_empty(&phb->dma_tables))
+ table = wsp_pci_create_dma32_table(phb, 0, NULL);
+ else
+ table = list_first_entry(&phb->dma_tables,
+ struct wsp_dma_table,
+ link);
+ } else {
+ /* else find a free region */
+ for (i = 0; i < phb->dma32_num_regions && !table; i++) {
+ if (__test_and_set_bit(i, &phb->dma32_map))
+ continue;
+ spin_unlock_irqrestore(&phb->lock, flags);
+ table = wsp_pci_create_dma32_table(phb, i, pdev);
+ }
+ }
+
+ /* Check if we got an error */
+ if (IS_ERR(table)) {
+ pr_err("%s: Failed to create DMA table, err %ld !\n",
+ pci_name(pdev), PTR_ERR(table));
+ return;
+ }
+
+ /* Or a valid table */
+ if (table) {
+ pr_info("%s: Setup iommu: 32-bit DMA region 0x%08lx..0x%08lx\n",
+ pci_name(pdev),
+ table->table.it_offset << IOMMU_PAGE_SHIFT,
+ (table->table.it_offset << IOMMU_PAGE_SHIFT)
+ + phb->dma32_region_size - 1);
+ archdata->dma_data.iommu_table_base = &table->table;
+ return;
+ }
+
+ /* Or no room */
+ spin_unlock_irqrestore(&phb->lock, flags);
+ pr_err("%s: Out of DMA space !\n", pci_name(pdev));
+}
+
+static void __init wsp_pcie_configure_hw(struct pci_controller *hose)
+{
+ u64 val;
+ int i;
+
+#define DUMP_REG(x) \
+ pr_debug("%-30s : 0x%016llx\n", #x, in_be64(hose->cfg_data + x))
+
+#ifdef CONFIG_WSP_DD1_WORKAROUND_BAD_PCIE_CLASS
+ /* WSP DD1 has a bogus class code by default in the PCI-E
+ * root complex's built-in P2P bridge */
+ val = in_be64(hose->cfg_data + PCIE_REG_SYS_CFG1);
+ pr_debug("PCI-E SYS_CFG1 : 0x%llx\n", val);
+ out_be64(hose->cfg_data + PCIE_REG_SYS_CFG1,
+ (val & ~PCIE_REG_SYS_CFG1_CLASS_CODE) | (PCI_CLASS_BRIDGE_PCI << 8));
+ pr_debug("PCI-E SYS_CFG1 : 0x%llx\n", in_be64(hose->cfg_data + PCIE_REG_SYS_CFG1));
+#endif /* CONFIG_WSP_DD1_WORKAROUND_BAD_PCIE_CLASS */
+
+#ifdef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS
+ /* XXX Disable TCE caching, it doesn't work on DD1 */
+ out_be64(hose->cfg_data + 0xe50,
+ in_be64(hose->cfg_data + 0xe50) | (3ull << 62));
+ printk("PCI-E DEBUG CONTROL 5 = 0x%llx\n", in_be64(hose->cfg_data + 0xe50));
+#endif
+
+ /* Configure M32A and IO. IO is hard wired to be 1M for now */
+ out_be64(hose->cfg_data + PCIE_REG_IO_BASE_ADDR, hose->io_base_phys);
+ out_be64(hose->cfg_data + PCIE_REG_IO_BASE_MASK,
+ (~(hose->io_resource.end - hose->io_resource.start)) &
+ 0x3fffffff000ul);
+ out_be64(hose->cfg_data + PCIE_REG_IO_START_ADDR, 0 | 1);
+
+ out_be64(hose->cfg_data + PCIE_REG_M32A_BASE_ADDR,
+ hose->mem_resources[0].start);
+ printk("Want to write to M32A_BASE_MASK : 0x%llx\n",
+ (~(hose->mem_resources[0].end -
+ hose->mem_resources[0].start)) & 0x3ffffff0000ul);
+ out_be64(hose->cfg_data + PCIE_REG_M32A_BASE_MASK,
+ (~(hose->mem_resources[0].end -
+ hose->mem_resources[0].start)) & 0x3ffffff0000ul);
+ out_be64(hose->cfg_data + PCIE_REG_M32A_START_ADDR,
+ (hose->mem_resources[0].start - hose->pci_mem_offset) | 1);
+
+ /* Clear all TVT entries
+ *
+ * XX Might get TVT count from device-tree
+ */
+ for (i = 0; i < IODA_TVT_COUNT; i++) {
+ out_be64(hose->cfg_data + PCIE_REG_IODA_ADDR,
+ PCIE_REG_IODA_AD_TBL_TVT | i);
+ out_be64(hose->cfg_data + PCIE_REG_IODA_DATA1, 0);
+ out_be64(hose->cfg_data + PCIE_REG_IODA_DATA0, 0);
+ }
+
+ /* Kill the TCE cache */
+ out_be64(hose->cfg_data + PCIE_REG_PHB_CONFIG,
+ in_be64(hose->cfg_data + PCIE_REG_PHB_CONFIG) |
+ PCIE_REG_PHBC_64B_TCE_EN);
+
+ /* Enable 32 & 64-bit MSIs, IO space and M32A */
+ val = PCIE_REG_PHBC_32BIT_MSI_EN |
+ PCIE_REG_PHBC_IO_EN |
+ PCIE_REG_PHBC_64BIT_MSI_EN |
+ PCIE_REG_PHBC_M32A_EN;
+ if (iommu_is_off)
+ val |= PCIE_REG_PHBC_DMA_XLATE_BYPASS;
+ pr_debug("Will write config: 0x%llx\n", val);
+ out_be64(hose->cfg_data + PCIE_REG_PHB_CONFIG, val);
+
+ /* Enable error reporting */
+ out_be64(hose->cfg_data + 0xe00,
+ in_be64(hose->cfg_data + 0xe00) | 0x0008000000000000ull);
+
+ /* Mask an error that's generated when doing config space probe
+ *
+ * XXX Maybe we should only mask it around config space cycles... that or
+ * ignore it when we know we had a config space cycle recently ?
+ */
+ out_be64(hose->cfg_data + PCIE_REG_DMA_ERR_STATUS_MASK, 0x8000000000000000ull);
+ out_be64(hose->cfg_data + PCIE_REG_DMA_ERR1_STATUS_MASK, 0x8000000000000000ull);
+
+ /* Enable UTL errors, for now, all of them got to UTL irq 1
+ *
+ * We similarily mask one UTL error caused apparently during normal
+ * probing. We also mask the link up error
+ */
+ out_be64(hose->cfg_data + PCIE_UTL_SYS_BUS_AGENT_ERR_SEV, 0);
+ out_be64(hose->cfg_data + PCIE_UTL_RC_ERR_SEVERITY, 0);
+ out_be64(hose->cfg_data + PCIE_UTL_PCIE_PORT_ERROR_SEV, 0);
+ out_be64(hose->cfg_data + PCIE_UTL_SYS_BUS_AGENT_IRQ_EN, 0xffffffff00000000ull);
+ out_be64(hose->cfg_data + PCIE_UTL_PCIE_PORT_IRQ_EN, 0xff5fffff00000000ull);
+ out_be64(hose->cfg_data + PCIE_UTL_EP_ERR_IRQ_EN, 0xffffffff00000000ull);
+
+ DUMP_REG(PCIE_REG_IO_BASE_ADDR);
+ DUMP_REG(PCIE_REG_IO_BASE_MASK);
+ DUMP_REG(PCIE_REG_IO_START_ADDR);
+ DUMP_REG(PCIE_REG_M32A_BASE_ADDR);
+ DUMP_REG(PCIE_REG_M32A_BASE_MASK);
+ DUMP_REG(PCIE_REG_M32A_START_ADDR);
+ DUMP_REG(PCIE_REG_M32B_BASE_ADDR);
+ DUMP_REG(PCIE_REG_M32B_BASE_MASK);
+ DUMP_REG(PCIE_REG_M32B_START_ADDR);
+ DUMP_REG(PCIE_REG_M64_BASE_ADDR);
+ DUMP_REG(PCIE_REG_M64_BASE_MASK);
+ DUMP_REG(PCIE_REG_M64_START_ADDR);
+ DUMP_REG(PCIE_REG_PHB_CONFIG);
+}
+
+static void wsp_pci_wait_io_idle(struct wsp_phb *phb, unsigned long port)
+{
+ u64 val;
+ int i;
+
+ for (i = 0; i < 10000; i++) {
+ val = in_be64(phb->hose->cfg_data + 0xe08);
+ if ((val & 0x1900000000000000ull) == 0x0100000000000000ull)
+ return;
+ udelay(1);
+ }
+ pr_warning("PCI IO timeout on domain %d port 0x%lx\n",
+ phb->hose->global_number, port);
+}
+
+#define DEF_PCI_AC_RET_pio(name, ret, at, al, aa) \
+static ret wsp_pci_##name at \
+{ \
+ struct iowa_bus *bus; \
+ struct wsp_phb *phb; \
+ unsigned long flags; \
+ ret rval; \
+ bus = iowa_pio_find_bus(aa); \
+ WARN_ON(!bus); \
+ phb = bus->private; \
+ spin_lock_irqsave(&phb->lock, flags); \
+ wsp_pci_wait_io_idle(phb, aa); \
+ rval = __do_##name al; \
+ spin_unlock_irqrestore(&phb->lock, flags); \
+ return rval; \
+}
+
+#define DEF_PCI_AC_NORET_pio(name, at, al, aa) \
+static void wsp_pci_##name at \
+{ \
+ struct iowa_bus *bus; \
+ struct wsp_phb *phb; \
+ unsigned long flags; \
+ bus = iowa_pio_find_bus(aa); \
+ WARN_ON(!bus); \
+ phb = bus->private; \
+ spin_lock_irqsave(&phb->lock, flags); \
+ wsp_pci_wait_io_idle(phb, aa); \
+ __do_##name al; \
+ spin_unlock_irqrestore(&phb->lock, flags); \
+}
+
+#define DEF_PCI_AC_RET_mem(name, ret, at, al, aa)
+#define DEF_PCI_AC_NORET_mem(name, at, al, aa)
+
+#define DEF_PCI_AC_RET(name, ret, at, al, space, aa) \
+ DEF_PCI_AC_RET_##space(name, ret, at, al, aa)
+
+#define DEF_PCI_AC_NORET(name, at, al, space, aa) \
+ DEF_PCI_AC_NORET_##space(name, at, al, aa) \
+
+
+#include <asm/io-defs.h>
+
+#undef DEF_PCI_AC_RET
+#undef DEF_PCI_AC_NORET
+
+static struct ppc_pci_io wsp_pci_iops = {
+ .inb = wsp_pci_inb,
+ .inw = wsp_pci_inw,
+ .inl = wsp_pci_inl,
+ .outb = wsp_pci_outb,
+ .outw = wsp_pci_outw,
+ .outl = wsp_pci_outl,
+ .insb = wsp_pci_insb,
+ .insw = wsp_pci_insw,
+ .insl = wsp_pci_insl,
+ .outsb = wsp_pci_outsb,
+ .outsw = wsp_pci_outsw,
+ .outsl = wsp_pci_outsl,
+};
+
+static int __init wsp_setup_one_phb(struct device_node *np)
+{
+ struct pci_controller *hose;
+ struct wsp_phb *phb;
+
+ pr_info("PCI: Setting up PCIe host bridge 0x%s\n", np->full_name);
+
+ phb = zalloc_maybe_bootmem(sizeof(struct wsp_phb), GFP_KERNEL);
+ if (!phb)
+ return -ENOMEM;
+ hose = pcibios_alloc_controller(np);
+ if (!hose) {
+ /* Can't really free the phb */
+ return -ENOMEM;
+ }
+ hose->private_data = phb;
+ phb->hose = hose;
+
+ INIT_LIST_HEAD(&phb->dma_tables);
+ spin_lock_init(&phb->lock);
+
+ /* XXX Use bus-range property ? */
+ hose->first_busno = 0;
+ hose->last_busno = 0xff;
+
+ /* We use cfg_data as the address for the whole bridge MMIO space
+ */
+ hose->cfg_data = of_iomap(hose->dn, 0);
+
+ pr_debug("PCIe registers mapped at 0x%p\n", hose->cfg_data);
+
+ /* Get the ranges of the device-tree */
+ pci_process_bridge_OF_ranges(hose, np, 0);
+
+ /* XXX Force re-assigning of everything for now */
+ pci_add_flags(PCI_REASSIGN_ALL_BUS | PCI_REASSIGN_ALL_RSRC |
+ PCI_ENABLE_PROC_DOMAINS);
+ pci_probe_only = 0;
+
+ /* Calculate how the TCE space is divided */
+ phb->dma32_base = 0;
+ phb->dma32_num_regions = NUM_DMA32_REGIONS;
+ if (phb->dma32_num_regions > MAX_TABLE_TVT_COUNT) {
+ pr_warning("IOMMU: Clamped to %d DMA32 regions\n",
+ MAX_TABLE_TVT_COUNT);
+ phb->dma32_num_regions = MAX_TABLE_TVT_COUNT;
+ }
+ phb->dma32_region_size = 0x80000000 / phb->dma32_num_regions;
+
+ BUG_ON(!is_power_of_2(phb->dma32_region_size));
+
+ /* Setup config ops */
+ hose->ops = &wsp_pcie_pci_ops;
+
+ /* Configure the HW */
+ wsp_pcie_configure_hw(hose);
+
+ /* Instanciate IO workarounds */
+ iowa_register_bus(hose, &wsp_pci_iops, NULL, phb);
+#ifdef CONFIG_PCI_MSI
+ wsp_setup_phb_msi(hose);
+#endif
+
+ /* Add to global list */
+ list_add(&phb->all, &wsp_phbs);
+
+ return 0;
+}
+
+void __init wsp_setup_pci(void)
+{
+ struct device_node *np;
+ int rc;
+
+ /* Find host bridges */
+ for_each_compatible_node(np, "pciex", PCIE_COMPATIBLE) {
+ rc = wsp_setup_one_phb(np);
+ if (rc)
+ pr_err("Failed to setup PCIe bridge %s, rc=%d\n",
+ np->full_name, rc);
+ }
+
+ /* Establish device-tree linkage */
+ pci_devs_phb_init();
+
+ /* Set DMA ops to use TCEs */
+ if (iommu_is_off) {
+ pr_info("PCI-E: Disabled TCEs, using direct DMA\n");
+ set_pci_dma_ops(&dma_direct_ops);
+ } else {
+ ppc_md.pci_dma_dev_setup = wsp_pci_dma_dev_setup;
+ ppc_md.tce_build = tce_build_wsp;
+ ppc_md.tce_free = tce_free_wsp;
+ set_pci_dma_ops(&dma_iommu_ops);
+ }
+}
+
+#define err_debug(fmt...) pr_debug(fmt)
+//#define err_debug(fmt...)
+
+static int __init wsp_pci_get_err_irq_no_dt(struct device_node *np)
+{
+ const u32 *prop;
+ int hw_irq;
+
+ /* Ok, no interrupts property, let's try to find our child P2P */
+ np = of_get_next_child(np, NULL);
+ if (np == NULL)
+ return 0;
+
+ /* Grab it's interrupt map */
+ prop = of_get_property(np, "interrupt-map", NULL);
+ if (prop == NULL)
+ return 0;
+
+ /* Grab one of the interrupts in there, keep the low 4 bits */
+ hw_irq = prop[5] & 0xf;
+
+ /* 0..4 for PHB 0 and 5..9 for PHB 1 */
+ if (hw_irq < 5)
+ hw_irq = 4;
+ else
+ hw_irq = 9;
+ hw_irq |= prop[5] & ~0xf;
+
+ err_debug("PCI: Using 0x%x as error IRQ for %s\n",
+ hw_irq, np->parent->full_name);
+ return irq_create_mapping(NULL, hw_irq);
+}
+
+static const struct {
+ u32 offset;
+ const char *name;
+} wsp_pci_regs[] = {
+#define DREG(x) { PCIE_REG_##x, #x }
+#define DUTL(x) { PCIE_UTL_##x, "UTL_" #x }
+ /* Architected registers except CONFIG_ and IODA
+ * to avoid side effects
+ */
+ DREG(DMA_CHAN_STATUS),
+ DREG(CPU_LOADSTORE_STATUS),
+ DREG(LOCK0),
+ DREG(LOCK1),
+ DREG(PHB_CONFIG),
+ DREG(IO_BASE_ADDR),
+ DREG(IO_BASE_MASK),
+ DREG(IO_START_ADDR),
+ DREG(M32A_BASE_ADDR),
+ DREG(M32A_BASE_MASK),
+ DREG(M32A_START_ADDR),
+ DREG(M32B_BASE_ADDR),
+ DREG(M32B_BASE_MASK),
+ DREG(M32B_START_ADDR),
+ DREG(M64_BASE_ADDR),
+ DREG(M64_BASE_MASK),
+ DREG(M64_START_ADDR),
+ DREG(TCE_KILL),
+ DREG(LOCK2),
+ DREG(PHB_GEN_CAP),
+ DREG(PHB_TCE_CAP),
+ DREG(PHB_IRQ_CAP),
+ DREG(PHB_EEH_CAP),
+ DREG(PAPR_ERR_INJ_CONTROL),
+ DREG(PAPR_ERR_INJ_ADDR),
+ DREG(PAPR_ERR_INJ_MASK),
+
+ /* UTL core regs */
+ DUTL(SYS_BUS_CONTROL),
+ DUTL(STATUS),
+ DUTL(SYS_BUS_AGENT_STATUS),
+ DUTL(SYS_BUS_AGENT_ERR_SEV),
+ DUTL(SYS_BUS_AGENT_IRQ_EN),
+ DUTL(SYS_BUS_BURST_SZ_CONF),
+ DUTL(REVISION_ID),
+ DUTL(OUT_POST_HDR_BUF_ALLOC),
+ DUTL(OUT_POST_DAT_BUF_ALLOC),
+ DUTL(IN_POST_HDR_BUF_ALLOC),
+ DUTL(IN_POST_DAT_BUF_ALLOC),
+ DUTL(OUT_NP_BUF_ALLOC),
+ DUTL(IN_NP_BUF_ALLOC),
+ DUTL(PCIE_TAGS_ALLOC),
+ DUTL(GBIF_READ_TAGS_ALLOC),
+
+ DUTL(PCIE_PORT_CONTROL),
+ DUTL(PCIE_PORT_STATUS),
+ DUTL(PCIE_PORT_ERROR_SEV),
+ DUTL(PCIE_PORT_IRQ_EN),
+ DUTL(RC_STATUS),
+ DUTL(RC_ERR_SEVERITY),
+ DUTL(RC_IRQ_EN),
+ DUTL(EP_STATUS),
+ DUTL(EP_ERR_SEVERITY),
+ DUTL(EP_ERR_IRQ_EN),
+ DUTL(PCI_PM_CTRL1),
+ DUTL(PCI_PM_CTRL2),
+
+ /* PCIe stack regs */
+ DREG(SYSTEM_CONFIG1),
+ DREG(SYSTEM_CONFIG2),
+ DREG(EP_SYSTEM_CONFIG),
+ DREG(EP_FLR),
+ DREG(EP_BAR_CONFIG),
+ DREG(LINK_CONFIG),
+ DREG(PM_CONFIG),
+ DREG(DLP_CONTROL),
+ DREG(DLP_STATUS),
+ DREG(ERR_REPORT_CONTROL),
+ DREG(SLOT_CONTROL1),
+ DREG(SLOT_CONTROL2),
+ DREG(UTL_CONFIG),
+ DREG(BUFFERS_CONFIG),
+ DREG(ERROR_INJECT),
+ DREG(SRIOV_CONFIG),
+ DREG(PF0_SRIOV_STATUS),
+ DREG(PF1_SRIOV_STATUS),
+ DREG(PORT_NUMBER),
+ DREG(POR_SYSTEM_CONFIG),
+
+ /* Internal logic regs */
+ DREG(PHB_VERSION),
+ DREG(RESET),
+ DREG(PHB_CONTROL),
+ DREG(PHB_TIMEOUT_CONTROL1),
+ DREG(PHB_QUIESCE_DMA),
+ DREG(PHB_DMA_READ_TAG_ACTV),
+ DREG(PHB_TCE_READ_TAG_ACTV),
+
+ /* FIR registers */
+ DREG(LEM_FIR_ACCUM),
+ DREG(LEM_FIR_AND_MASK),
+ DREG(LEM_FIR_OR_MASK),
+ DREG(LEM_ACTION0),
+ DREG(LEM_ACTION1),
+ DREG(LEM_ERROR_MASK),
+ DREG(LEM_ERROR_AND_MASK),
+ DREG(LEM_ERROR_OR_MASK),
+
+ /* Error traps registers */
+ DREG(PHB_ERR_STATUS),
+ DREG(PHB_ERR_STATUS),
+ DREG(PHB_ERR1_STATUS),
+ DREG(PHB_ERR_INJECT),
+ DREG(PHB_ERR_LEM_ENABLE),
+ DREG(PHB_ERR_IRQ_ENABLE),
+ DREG(PHB_ERR_FREEZE_ENABLE),
+ DREG(PHB_ERR_SIDE_ENABLE),
+ DREG(PHB_ERR_LOG_0),
+ DREG(PHB_ERR_LOG_1),
+ DREG(PHB_ERR_STATUS_MASK),
+ DREG(PHB_ERR1_STATUS_MASK),
+ DREG(MMIO_ERR_STATUS),
+ DREG(MMIO_ERR1_STATUS),
+ DREG(MMIO_ERR_INJECT),
+ DREG(MMIO_ERR_LEM_ENABLE),
+ DREG(MMIO_ERR_IRQ_ENABLE),
+ DREG(MMIO_ERR_FREEZE_ENABLE),
+ DREG(MMIO_ERR_SIDE_ENABLE),
+ DREG(MMIO_ERR_LOG_0),
+ DREG(MMIO_ERR_LOG_1),
+ DREG(MMIO_ERR_STATUS_MASK),
+ DREG(MMIO_ERR1_STATUS_MASK),
+ DREG(DMA_ERR_STATUS),
+ DREG(DMA_ERR1_STATUS),
+ DREG(DMA_ERR_INJECT),
+ DREG(DMA_ERR_LEM_ENABLE),
+ DREG(DMA_ERR_IRQ_ENABLE),
+ DREG(DMA_ERR_FREEZE_ENABLE),
+ DREG(DMA_ERR_SIDE_ENABLE),
+ DREG(DMA_ERR_LOG_0),
+ DREG(DMA_ERR_LOG_1),
+ DREG(DMA_ERR_STATUS_MASK),
+ DREG(DMA_ERR1_STATUS_MASK),
+
+ /* Debug and Trace registers */
+ DREG(PHB_DEBUG_CONTROL0),
+ DREG(PHB_DEBUG_STATUS0),
+ DREG(PHB_DEBUG_CONTROL1),
+ DREG(PHB_DEBUG_STATUS1),
+ DREG(PHB_DEBUG_CONTROL2),
+ DREG(PHB_DEBUG_STATUS2),
+ DREG(PHB_DEBUG_CONTROL3),
+ DREG(PHB_DEBUG_STATUS3),
+ DREG(PHB_DEBUG_CONTROL4),
+ DREG(PHB_DEBUG_STATUS4),
+ DREG(PHB_DEBUG_CONTROL5),
+ DREG(PHB_DEBUG_STATUS5),
+
+ /* Don't seem to exist ...
+ DREG(PHB_DEBUG_CONTROL6),
+ DREG(PHB_DEBUG_STATUS6),
+ */
+};
+
+static int wsp_pci_regs_show(struct seq_file *m, void *private)
+{
+ struct wsp_phb *phb = m->private;
+ struct pci_controller *hose = phb->hose;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(wsp_pci_regs); i++) {
+ /* Skip write-only regs */
+ if (wsp_pci_regs[i].offset == 0xc08 ||
+ wsp_pci_regs[i].offset == 0xc10 ||
+ wsp_pci_regs[i].offset == 0xc38 ||
+ wsp_pci_regs[i].offset == 0xc40)
+ continue;
+ seq_printf(m, "0x%03x: 0x%016llx %s\n",
+ wsp_pci_regs[i].offset,
+ in_be64(hose->cfg_data + wsp_pci_regs[i].offset),
+ wsp_pci_regs[i].name);
+ }
+ return 0;
+}
+
+static int wsp_pci_regs_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, wsp_pci_regs_show, inode->i_private);
+}
+
+static const struct file_operations wsp_pci_regs_fops = {
+ .open = wsp_pci_regs_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int wsp_pci_reg_set(void *data, u64 val)
+{
+ out_be64((void __iomem *)data, val);
+ return 0;
+}
+
+static int wsp_pci_reg_get(void *data, u64 *val)
+{
+ *val = in_be64((void __iomem *)data);
+ return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(wsp_pci_reg_fops, wsp_pci_reg_get, wsp_pci_reg_set, "0x%llx\n");
+
+static irqreturn_t wsp_pci_err_irq(int irq, void *dev_id)
+{
+ struct wsp_phb *phb = dev_id;
+ struct pci_controller *hose = phb->hose;
+ irqreturn_t handled = IRQ_NONE;
+ struct wsp_pcie_err_log_data ed;
+
+ pr_err("PCI: Error interrupt on %s (PHB %d)\n",
+ hose->dn->full_name, hose->global_number);
+ again:
+ memset(&ed, 0, sizeof(ed));
+
+ /* Read and clear UTL errors */
+ ed.utl_sys_err = in_be64(hose->cfg_data + PCIE_UTL_SYS_BUS_AGENT_STATUS);
+ if (ed.utl_sys_err)
+ out_be64(hose->cfg_data + PCIE_UTL_SYS_BUS_AGENT_STATUS, ed.utl_sys_err);
+ ed.utl_port_err = in_be64(hose->cfg_data + PCIE_UTL_PCIE_PORT_STATUS);
+ if (ed.utl_port_err)
+ out_be64(hose->cfg_data + PCIE_UTL_PCIE_PORT_STATUS, ed.utl_port_err);
+ ed.utl_rc_err = in_be64(hose->cfg_data + PCIE_UTL_RC_STATUS);
+ if (ed.utl_rc_err)
+ out_be64(hose->cfg_data + PCIE_UTL_RC_STATUS, ed.utl_rc_err);
+
+ /* Read and clear main trap errors */
+ ed.phb_err = in_be64(hose->cfg_data + PCIE_REG_PHB_ERR_STATUS);
+ if (ed.phb_err) {
+ ed.phb_err1 = in_be64(hose->cfg_data + PCIE_REG_PHB_ERR1_STATUS);
+ ed.phb_log0 = in_be64(hose->cfg_data + PCIE_REG_PHB_ERR_LOG_0);
+ ed.phb_log1 = in_be64(hose->cfg_data + PCIE_REG_PHB_ERR_LOG_1);
+ out_be64(hose->cfg_data + PCIE_REG_PHB_ERR1_STATUS, 0);
+ out_be64(hose->cfg_data + PCIE_REG_PHB_ERR_STATUS, 0);
+ }
+ ed.mmio_err = in_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_STATUS);
+ if (ed.mmio_err) {
+ ed.mmio_err1 = in_be64(hose->cfg_data + PCIE_REG_MMIO_ERR1_STATUS);
+ ed.mmio_log0 = in_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_LOG_0);
+ ed.mmio_log1 = in_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_LOG_1);
+ out_be64(hose->cfg_data + PCIE_REG_MMIO_ERR1_STATUS, 0);
+ out_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_STATUS, 0);
+ }
+ ed.dma_err = in_be64(hose->cfg_data + PCIE_REG_DMA_ERR_STATUS);
+ if (ed.dma_err) {
+ ed.dma_err1 = in_be64(hose->cfg_data + PCIE_REG_DMA_ERR1_STATUS);
+ ed.dma_log0 = in_be64(hose->cfg_data + PCIE_REG_DMA_ERR_LOG_0);
+ ed.dma_log1 = in_be64(hose->cfg_data + PCIE_REG_DMA_ERR_LOG_1);
+ out_be64(hose->cfg_data + PCIE_REG_DMA_ERR1_STATUS, 0);
+ out_be64(hose->cfg_data + PCIE_REG_DMA_ERR_STATUS, 0);
+ }
+
+ /* Now print things out */
+ if (ed.phb_err) {
+ pr_err(" PHB Error Status : 0x%016llx\n", ed.phb_err);
+ pr_err(" PHB First Error Status: 0x%016llx\n", ed.phb_err1);
+ pr_err(" PHB Error Log 0 : 0x%016llx\n", ed.phb_log0);
+ pr_err(" PHB Error Log 1 : 0x%016llx\n", ed.phb_log1);
+ }
+ if (ed.mmio_err) {
+ pr_err(" MMIO Error Status : 0x%016llx\n", ed.mmio_err);
+ pr_err(" MMIO First Error Status: 0x%016llx\n", ed.mmio_err1);
+ pr_err(" MMIO Error Log 0 : 0x%016llx\n", ed.mmio_log0);
+ pr_err(" MMIO Error Log 1 : 0x%016llx\n", ed.mmio_log1);
+ }
+ if (ed.dma_err) {
+ pr_err(" DMA Error Status : 0x%016llx\n", ed.dma_err);
+ pr_err(" DMA First Error Status: 0x%016llx\n", ed.dma_err1);
+ pr_err(" DMA Error Log 0 : 0x%016llx\n", ed.dma_log0);
+ pr_err(" DMA Error Log 1 : 0x%016llx\n", ed.dma_log1);
+ }
+ if (ed.utl_sys_err)
+ pr_err(" UTL Sys Error Status : 0x%016llx\n", ed.utl_sys_err);
+ if (ed.utl_port_err)
+ pr_err(" UTL Port Error Status : 0x%016llx\n", ed.utl_port_err);
+ if (ed.utl_rc_err)
+ pr_err(" UTL RC Error Status : 0x%016llx\n", ed.utl_rc_err);
+
+ /* Interrupts are caused by the error traps. If we had any error there
+ * we loop again in case the UTL buffered some new stuff between
+ * going there and going to the traps
+ */
+ if (ed.dma_err || ed.mmio_err || ed.phb_err) {
+ handled = IRQ_HANDLED;
+ goto again;
+ }
+ return handled;
+}
+
+static void __init wsp_setup_pci_err_reporting(struct wsp_phb *phb)
+{
+ struct pci_controller *hose = phb->hose;
+ int err_irq, i, rc;
+ char fname[16];
+
+ /* Create a debugfs file for that PHB */
+ sprintf(fname, "phb%d", phb->hose->global_number);
+ phb->ddir = debugfs_create_dir(fname, powerpc_debugfs_root);
+
+ /* Some useful debug output */
+ if (phb->ddir) {
+ struct dentry *d = debugfs_create_dir("regs", phb->ddir);
+ char tmp[64];
+
+ for (i = 0; i < ARRAY_SIZE(wsp_pci_regs); i++) {
+ sprintf(tmp, "%03x_%s", wsp_pci_regs[i].offset,
+ wsp_pci_regs[i].name);
+ debugfs_create_file(tmp, 0600, d,
+ hose->cfg_data + wsp_pci_regs[i].offset,
+ &wsp_pci_reg_fops);
+ }
+ debugfs_create_file("all_regs", 0600, phb->ddir, phb, &wsp_pci_regs_fops);
+ }
+
+ /* Find the IRQ number for that PHB */
+ err_irq = irq_of_parse_and_map(hose->dn, 0);
+ if (err_irq == 0)
+ /* XXX Error IRQ lacking from device-tree */
+ err_irq = wsp_pci_get_err_irq_no_dt(hose->dn);
+ if (err_irq == 0) {
+ pr_err("PCI: Failed to fetch error interrupt for %s\n",
+ hose->dn->full_name);
+ return;
+ }
+ /* Request it */
+ rc = request_irq(err_irq, wsp_pci_err_irq, 0, "wsp_pci error", phb);
+ if (rc) {
+ pr_err("PCI: Failed to request interrupt for %s\n",
+ hose->dn->full_name);
+ }
+ /* Enable interrupts for all errors for now */
+ out_be64(hose->cfg_data + PCIE_REG_PHB_ERR_IRQ_ENABLE, 0xffffffffffffffffull);
+ out_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_IRQ_ENABLE, 0xffffffffffffffffull);
+ out_be64(hose->cfg_data + PCIE_REG_DMA_ERR_IRQ_ENABLE, 0xffffffffffffffffull);
+}
+
+/*
+ * This is called later to hookup with the error interrupt
+ */
+static int __init wsp_setup_pci_late(void)
+{
+ struct wsp_phb *phb;
+
+ list_for_each_entry(phb, &wsp_phbs, all)
+ wsp_setup_pci_err_reporting(phb);
+
+ return 0;
+}
+arch_initcall(wsp_setup_pci_late);
--- /dev/null
+/*
+ * Copyright 2010 Ben Herrenschmidt, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __WSP_PCI_H
+#define __WSP_PCI_H
+
+/* Architected registers */
+#define PCIE_REG_DMA_CHAN_STATUS 0x110
+#define PCIE_REG_CPU_LOADSTORE_STATUS 0x120
+
+#define PCIE_REG_CONFIG_DATA 0x130
+#define PCIE_REG_LOCK0 0x138
+#define PCIE_REG_CONFIG_ADDRESS 0x140
+#define PCIE_REG_CA_ENABLE 0x8000000000000000ull
+#define PCIE_REG_CA_BUS_MASK 0x0ff0000000000000ull
+#define PCIE_REG_CA_BUS_SHIFT (20+32)
+#define PCIE_REG_CA_DEV_MASK 0x000f800000000000ull
+#define PCIE_REG_CA_DEV_SHIFT (15+32)
+#define PCIE_REG_CA_FUNC_MASK 0x0000700000000000ull
+#define PCIE_REG_CA_FUNC_SHIFT (12+32)
+#define PCIE_REG_CA_REG_MASK 0x00000fff00000000ull
+#define PCIE_REG_CA_REG_SHIFT ( 0+32)
+#define PCIE_REG_CA_BE_MASK 0x00000000f0000000ull
+#define PCIE_REG_CA_BE_SHIFT ( 28)
+#define PCIE_REG_LOCK1 0x148
+
+#define PCIE_REG_PHB_CONFIG 0x160
+#define PCIE_REG_PHBC_64B_TCE_EN 0x2000000000000000ull
+#define PCIE_REG_PHBC_MMIO_DMA_FREEZE_EN 0x1000000000000000ull
+#define PCIE_REG_PHBC_32BIT_MSI_EN 0x0080000000000000ull
+#define PCIE_REG_PHBC_M64_EN 0x0040000000000000ull
+#define PCIE_REG_PHBC_IO_EN 0x0008000000000000ull
+#define PCIE_REG_PHBC_64BIT_MSI_EN 0x0002000000000000ull
+#define PCIE_REG_PHBC_M32A_EN 0x0000800000000000ull
+#define PCIE_REG_PHBC_M32B_EN 0x0000400000000000ull
+#define PCIE_REG_PHBC_MSI_PE_VALIDATE 0x0000200000000000ull
+#define PCIE_REG_PHBC_DMA_XLATE_BYPASS 0x0000100000000000ull
+
+#define PCIE_REG_IO_BASE_ADDR 0x170
+#define PCIE_REG_IO_BASE_MASK 0x178
+#define PCIE_REG_IO_START_ADDR 0x180
+
+#define PCIE_REG_M32A_BASE_ADDR 0x190
+#define PCIE_REG_M32A_BASE_MASK 0x198
+#define PCIE_REG_M32A_START_ADDR 0x1a0
+
+#define PCIE_REG_M32B_BASE_ADDR 0x1b0
+#define PCIE_REG_M32B_BASE_MASK 0x1b8
+#define PCIE_REG_M32B_START_ADDR 0x1c0
+
+#define PCIE_REG_M64_BASE_ADDR 0x1e0
+#define PCIE_REG_M64_BASE_MASK 0x1e8
+#define PCIE_REG_M64_START_ADDR 0x1f0
+
+#define PCIE_REG_TCE_KILL 0x210
+#define PCIE_REG_TCEKILL_SINGLE 0x8000000000000000ull
+#define PCIE_REG_TCEKILL_ADDR_MASK 0x000003fffffffff8ull
+#define PCIE_REG_TCEKILL_PS_4K 0
+#define PCIE_REG_TCEKILL_PS_64K 1
+#define PCIE_REG_TCEKILL_PS_16M 2
+#define PCIE_REG_TCEKILL_PS_16G 3
+
+#define PCIE_REG_IODA_ADDR 0x220
+#define PCIE_REG_IODA_AD_AUTOINC 0x8000000000000000ull
+#define PCIE_REG_IODA_AD_TBL_MVT 0x0005000000000000ull
+#define PCIE_REG_IODA_AD_TBL_PELT 0x0006000000000000ull
+#define PCIE_REG_IODA_AD_TBL_PESTA 0x0007000000000000ull
+#define PCIE_REG_IODA_AD_TBL_PESTB 0x0008000000000000ull
+#define PCIE_REG_IODA_AD_TBL_TVT 0x0009000000000000ull
+#define PCIE_REG_IODA_AD_TBL_TCE 0x000a000000000000ull
+#define PCIE_REG_IODA_DATA0 0x228
+#define PCIE_REG_IODA_DATA1 0x230
+
+#define PCIE_REG_LOCK2 0x240
+
+#define PCIE_REG_PHB_GEN_CAP 0x250
+#define PCIE_REG_PHB_TCE_CAP 0x258
+#define PCIE_REG_PHB_IRQ_CAP 0x260
+#define PCIE_REG_PHB_EEH_CAP 0x268
+
+#define PCIE_REG_PAPR_ERR_INJ_CONTROL 0x2b0
+#define PCIE_REG_PAPR_ERR_INJ_ADDR 0x2b8
+#define PCIE_REG_PAPR_ERR_INJ_MASK 0x2c0
+
+
+#define PCIE_REG_SYS_CFG1 0x600
+#define PCIE_REG_SYS_CFG1_CLASS_CODE 0x0000000000ffffffull
+
+#define IODA_TVT0_TTA_MASK 0x000fffffffff0000ull
+#define IODA_TVT0_TTA_SHIFT 4
+#define IODA_TVT0_BUSNUM_VALID_MASK 0x000000000000e000ull
+#define IODA_TVT0_TCE_TABLE_SIZE_MASK 0x0000000000001f00ull
+#define IODA_TVT0_TCE_TABLE_SIZE_SHIFT 8
+#define IODA_TVT0_BUSNUM_VALUE_MASK 0x00000000000000ffull
+#define IODA_TVT0_BUSNUM_VALID_SHIFT 0
+#define IODA_TVT1_DEVNUM_VALID 0x2000000000000000ull
+#define IODA_TVT1_DEVNUM_VALUE_MASK 0x1f00000000000000ull
+#define IODA_TVT1_DEVNUM_VALUE_SHIFT 56
+#define IODA_TVT1_FUNCNUM_VALID 0x0008000000000000ull
+#define IODA_TVT1_FUNCNUM_VALUE_MASK 0x0007000000000000ull
+#define IODA_TVT1_FUNCNUM_VALUE_SHIFT 48
+#define IODA_TVT1_IO_PAGE_SIZE_MASK 0x00001f0000000000ull
+#define IODA_TVT1_IO_PAGE_SIZE_SHIFT 40
+#define IODA_TVT1_PE_NUMBER_MASK 0x000000000000003full
+#define IODA_TVT1_PE_NUMBER_SHIFT 0
+
+#define IODA_TVT_COUNT 64
+
+/* UTL Core registers */
+#define PCIE_UTL_SYS_BUS_CONTROL 0x400
+#define PCIE_UTL_STATUS 0x408
+#define PCIE_UTL_SYS_BUS_AGENT_STATUS 0x410
+#define PCIE_UTL_SYS_BUS_AGENT_ERR_SEV 0x418
+#define PCIE_UTL_SYS_BUS_AGENT_IRQ_EN 0x420
+#define PCIE_UTL_SYS_BUS_BURST_SZ_CONF 0x440
+#define PCIE_UTL_REVISION_ID 0x448
+
+#define PCIE_UTL_OUT_POST_HDR_BUF_ALLOC 0x4c0
+#define PCIE_UTL_OUT_POST_DAT_BUF_ALLOC 0x4d0
+#define PCIE_UTL_IN_POST_HDR_BUF_ALLOC 0x4e0
+#define PCIE_UTL_IN_POST_DAT_BUF_ALLOC 0x4f0
+#define PCIE_UTL_OUT_NP_BUF_ALLOC 0x500
+#define PCIE_UTL_IN_NP_BUF_ALLOC 0x510
+#define PCIE_UTL_PCIE_TAGS_ALLOC 0x520
+#define PCIE_UTL_GBIF_READ_TAGS_ALLOC 0x530
+
+#define PCIE_UTL_PCIE_PORT_CONTROL 0x540
+#define PCIE_UTL_PCIE_PORT_STATUS 0x548
+#define PCIE_UTL_PCIE_PORT_ERROR_SEV 0x550
+#define PCIE_UTL_PCIE_PORT_IRQ_EN 0x558
+#define PCIE_UTL_RC_STATUS 0x560
+#define PCIE_UTL_RC_ERR_SEVERITY 0x568
+#define PCIE_UTL_RC_IRQ_EN 0x570
+#define PCIE_UTL_EP_STATUS 0x578
+#define PCIE_UTL_EP_ERR_SEVERITY 0x580
+#define PCIE_UTL_EP_ERR_IRQ_EN 0x588
+
+#define PCIE_UTL_PCI_PM_CTRL1 0x590
+#define PCIE_UTL_PCI_PM_CTRL2 0x598
+
+/* PCIe stack registers */
+#define PCIE_REG_SYSTEM_CONFIG1 0x600
+#define PCIE_REG_SYSTEM_CONFIG2 0x608
+#define PCIE_REG_EP_SYSTEM_CONFIG 0x618
+#define PCIE_REG_EP_FLR 0x620
+#define PCIE_REG_EP_BAR_CONFIG 0x628
+#define PCIE_REG_LINK_CONFIG 0x630
+#define PCIE_REG_PM_CONFIG 0x640
+#define PCIE_REG_DLP_CONTROL 0x650
+#define PCIE_REG_DLP_STATUS 0x658
+#define PCIE_REG_ERR_REPORT_CONTROL 0x660
+#define PCIE_REG_SLOT_CONTROL1 0x670
+#define PCIE_REG_SLOT_CONTROL2 0x678
+#define PCIE_REG_UTL_CONFIG 0x680
+#define PCIE_REG_BUFFERS_CONFIG 0x690
+#define PCIE_REG_ERROR_INJECT 0x698
+#define PCIE_REG_SRIOV_CONFIG 0x6a0
+#define PCIE_REG_PF0_SRIOV_STATUS 0x6a8
+#define PCIE_REG_PF1_SRIOV_STATUS 0x6b0
+#define PCIE_REG_PORT_NUMBER 0x700
+#define PCIE_REG_POR_SYSTEM_CONFIG 0x708
+
+/* PHB internal logic registers */
+#define PCIE_REG_PHB_VERSION 0x800
+#define PCIE_REG_RESET 0x808
+#define PCIE_REG_PHB_CONTROL 0x810
+#define PCIE_REG_PHB_TIMEOUT_CONTROL1 0x878
+#define PCIE_REG_PHB_QUIESCE_DMA 0x888
+#define PCIE_REG_PHB_DMA_READ_TAG_ACTV 0x900
+#define PCIE_REG_PHB_TCE_READ_TAG_ACTV 0x908
+
+/* FIR registers */
+#define PCIE_REG_LEM_FIR_ACCUM 0xc00
+#define PCIE_REG_LEM_FIR_AND_MASK 0xc08
+#define PCIE_REG_LEM_FIR_OR_MASK 0xc10
+#define PCIE_REG_LEM_ACTION0 0xc18
+#define PCIE_REG_LEM_ACTION1 0xc20
+#define PCIE_REG_LEM_ERROR_MASK 0xc30
+#define PCIE_REG_LEM_ERROR_AND_MASK 0xc38
+#define PCIE_REG_LEM_ERROR_OR_MASK 0xc40
+
+/* PHB Error registers */
+#define PCIE_REG_PHB_ERR_STATUS 0xc80
+#define PCIE_REG_PHB_ERR1_STATUS 0xc88
+#define PCIE_REG_PHB_ERR_INJECT 0xc90
+#define PCIE_REG_PHB_ERR_LEM_ENABLE 0xc98
+#define PCIE_REG_PHB_ERR_IRQ_ENABLE 0xca0
+#define PCIE_REG_PHB_ERR_FREEZE_ENABLE 0xca8
+#define PCIE_REG_PHB_ERR_SIDE_ENABLE 0xcb8
+#define PCIE_REG_PHB_ERR_LOG_0 0xcc0
+#define PCIE_REG_PHB_ERR_LOG_1 0xcc8
+#define PCIE_REG_PHB_ERR_STATUS_MASK 0xcd0
+#define PCIE_REG_PHB_ERR1_STATUS_MASK 0xcd8
+
+#define PCIE_REG_MMIO_ERR_STATUS 0xd00
+#define PCIE_REG_MMIO_ERR1_STATUS 0xd08
+#define PCIE_REG_MMIO_ERR_INJECT 0xd10
+#define PCIE_REG_MMIO_ERR_LEM_ENABLE 0xd18
+#define PCIE_REG_MMIO_ERR_IRQ_ENABLE 0xd20
+#define PCIE_REG_MMIO_ERR_FREEZE_ENABLE 0xd28
+#define PCIE_REG_MMIO_ERR_SIDE_ENABLE 0xd38
+#define PCIE_REG_MMIO_ERR_LOG_0 0xd40
+#define PCIE_REG_MMIO_ERR_LOG_1 0xd48
+#define PCIE_REG_MMIO_ERR_STATUS_MASK 0xd50
+#define PCIE_REG_MMIO_ERR1_STATUS_MASK 0xd58
+
+#define PCIE_REG_DMA_ERR_STATUS 0xd80
+#define PCIE_REG_DMA_ERR1_STATUS 0xd88
+#define PCIE_REG_DMA_ERR_INJECT 0xd90
+#define PCIE_REG_DMA_ERR_LEM_ENABLE 0xd98
+#define PCIE_REG_DMA_ERR_IRQ_ENABLE 0xda0
+#define PCIE_REG_DMA_ERR_FREEZE_ENABLE 0xda8
+#define PCIE_REG_DMA_ERR_SIDE_ENABLE 0xdb8
+#define PCIE_REG_DMA_ERR_LOG_0 0xdc0
+#define PCIE_REG_DMA_ERR_LOG_1 0xdc8
+#define PCIE_REG_DMA_ERR_STATUS_MASK 0xdd0
+#define PCIE_REG_DMA_ERR1_STATUS_MASK 0xdd8
+
+/* Shortcuts for access to the above using the PHB definitions
+ * with an offset
+ */
+#define PCIE_REG_ERR_PHB_OFFSET 0x0
+#define PCIE_REG_ERR_MMIO_OFFSET 0x80
+#define PCIE_REG_ERR_DMA_OFFSET 0x100
+
+/* Debug and Trace registers */
+#define PCIE_REG_PHB_DEBUG_CONTROL0 0xe00
+#define PCIE_REG_PHB_DEBUG_STATUS0 0xe08
+#define PCIE_REG_PHB_DEBUG_CONTROL1 0xe10
+#define PCIE_REG_PHB_DEBUG_STATUS1 0xe18
+#define PCIE_REG_PHB_DEBUG_CONTROL2 0xe20
+#define PCIE_REG_PHB_DEBUG_STATUS2 0xe28
+#define PCIE_REG_PHB_DEBUG_CONTROL3 0xe30
+#define PCIE_REG_PHB_DEBUG_STATUS3 0xe38
+#define PCIE_REG_PHB_DEBUG_CONTROL4 0xe40
+#define PCIE_REG_PHB_DEBUG_STATUS4 0xe48
+#define PCIE_REG_PHB_DEBUG_CONTROL5 0xe50
+#define PCIE_REG_PHB_DEBUG_STATUS5 0xe58
+#define PCIE_REG_PHB_DEBUG_CONTROL6 0xe60
+#define PCIE_REG_PHB_DEBUG_STATUS6 0xe68
+
+/* Definition for PCIe errors */
+struct wsp_pcie_err_log_data {
+ __u64 phb_err;
+ __u64 phb_err1;
+ __u64 phb_log0;
+ __u64 phb_log1;
+ __u64 mmio_err;
+ __u64 mmio_err1;
+ __u64 mmio_log0;
+ __u64 mmio_log1;
+ __u64 dma_err;
+ __u64 dma_err1;
+ __u64 dma_log0;
+ __u64 dma_log1;
+ __u64 utl_sys_err;
+ __u64 utl_port_err;
+ __u64 utl_rc_err;
+ __u64 unused;
+};
+
+#endif /* __WSP_PCI_H */
obj-$(CONFIG_FSL_PMC) += fsl_pmc.o
obj-$(CONFIG_FSL_LBC) += fsl_lbc.o
obj-$(CONFIG_FSL_GTM) += fsl_gtm.o
-obj-$(CONFIG_MPC8xxx_GPIO) += mpc8xxx_gpio.o
obj-$(CONFIG_FSL_85XX_CACHE_SRAM) += fsl_85xx_l2ctlr.o fsl_85xx_cache_sram.o
obj-$(CONFIG_SIMPLE_GPIO) += simple_gpio.o
obj-$(CONFIG_FSL_RIO) += fsl_rio.o
#include <linux/err.h>
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/string.h>
*
* Author: Scott Wood <scottwood@freescale.com>
*
- * Copyright 2007 Freescale Semiconductor, Inc.
+ * Copyright 2007-2008,2010 Freescale Semiconductor, Inc.
*
* Some parts derived from commproc.c/cpm2_common.c, which is:
* Copyright (c) 1997 Dan error_act (dmalek@jlc.net)
#include <linux/init.h>
#include <linux/of_device.h>
#include <linux/spinlock.h>
+#include <linux/export.h>
#include <linux/of.h>
#include <linux/slab.h>
spin_lock_irqsave(&cpm_muram_lock, flags);
cpm_muram_info.alignment = align;
start = rh_alloc(&cpm_muram_info, size, "commproc");
+ memset(cpm_muram_addr(start), 0, size);
spin_unlock_irqrestore(&cpm_muram_lock, flags);
return start;
#undef DEBUG
#include <linux/kernel.h>
+#include <linux/export.h>
#include <asm/prom.h>
#include <asm/dcr.h>
#include <linux/spinlock.h>
#include <linux/bitops.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <asm/fsl_gtm.h>
#define GTCFR_STP(x) ((x) & 1 ? 1 << 5 : 1 << 1)
*/
#include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/compiler.h>
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/slab.h>
+#include <linux/sched.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/mod_devicetable.h>
struct fsl_msi_feature {
u32 fsl_pic_ip;
- u32 msiir_offset;
+ u32 msiir_offset; /* Offset of MSIIR, relative to start of MSIR bank */
};
struct fsl_msi_cascade_data {
{
struct fsl_msi *msi_data = fsl_msi_data;
struct pci_controller *hose = pci_bus_to_host(pdev->bus);
- u64 base = fsl_pci_immrbar_base(hose);
+ u64 address; /* Physical address of the MSIIR */
+ int len;
+ const u64 *reg;
+
+ /* If the msi-address-64 property exists, then use it */
+ reg = of_get_property(hose->dn, "msi-address-64", &len);
+ if (reg && (len == sizeof(u64)))
+ address = be64_to_cpup(reg);
+ else
+ address = fsl_pci_immrbar_base(hose) + msi_data->msiir_offset;
- msg->address_lo = msi_data->msi_addr_lo + lower_32_bits(base);
- msg->address_hi = msi_data->msi_addr_hi + upper_32_bits(base);
+ msg->address_lo = lower_32_bits(address);
+ msg->address_hi = upper_32_bits(address);
msg->data = hwirq;
}
msi->msi_virqs[irq_index] = virt_msir;
- cascade_data->index = offset + irq_index;
+ cascade_data->index = offset;
cascade_data->msi_data = msi;
irq_set_handler_data(virt_msir, cascade_data);
irq_set_chained_handler(virt_msir, fsl_msi_cascade);
msi->irqhost->host_data = msi;
- msi->msi_addr_hi = 0x0;
- msi->msi_addr_lo = features->msiir_offset + (res.start & 0xfffff);
+ msi->msiir_offset = features->msiir_offset + (res.start & 0xfffff);
rc = fsl_msi_init_allocator(msi);
if (rc) {
goto error_out;
}
- if (!p)
+ if (!p) {
p = all_avail;
+ len = sizeof(all_avail);
+ }
for (irq_index = 0, i = 0; i < len / (2 * sizeof(u32)); i++) {
if (p[i * 2] % IRQS_PER_MSI_REG ||
count = p[i * 2 + 1] / IRQS_PER_MSI_REG;
for (j = 0; j < count; j++, irq_index++) {
- err = fsl_msi_setup_hwirq(msi, dev, offset, irq_index);
+ err = fsl_msi_setup_hwirq(msi, dev, offset + j, irq_index);
if (err)
goto error_out;
}
unsigned long cascade_irq;
- u32 msi_addr_lo;
- u32 msi_addr_hi;
+ u32 msiir_offset; /* Offset of MSIIR, relative to start of CCSR */
void __iomem *msi_regs;
u32 feature;
int msi_virqs[NR_MSI_REG];
#include <linux/init.h>
#include <linux/types.h>
#include <linux/errno.h>
+#include <linux/export.h>
#include <linux/suspend.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/major.h>
#include <linux/delay.h>
#include <linux/irq.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
+#include <linux/export.h>
unsigned int
mpc5xxx_get_bus_frequency(struct device_node *node)
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/stddef.h>
#include <linux/init.h>
#include <linux/sched.h>
+++ /dev/null
-/*
- * GPIOs on MPC512x/8349/8572/8610 and compatible
- *
- * Copyright (C) 2008 Peter Korsgaard <jacmet@sunsite.dk>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_gpio.h>
-#include <linux/gpio.h>
-#include <linux/slab.h>
-#include <linux/irq.h>
-
-#define MPC8XXX_GPIO_PINS 32
-
-#define GPIO_DIR 0x00
-#define GPIO_ODR 0x04
-#define GPIO_DAT 0x08
-#define GPIO_IER 0x0c
-#define GPIO_IMR 0x10
-#define GPIO_ICR 0x14
-#define GPIO_ICR2 0x18
-
-struct mpc8xxx_gpio_chip {
- struct of_mm_gpio_chip mm_gc;
- spinlock_t lock;
-
- /*
- * shadowed data register to be able to clear/set output pins in
- * open drain mode safely
- */
- u32 data;
- struct irq_host *irq;
- void *of_dev_id_data;
-};
-
-static inline u32 mpc8xxx_gpio2mask(unsigned int gpio)
-{
- return 1u << (MPC8XXX_GPIO_PINS - 1 - gpio);
-}
-
-static inline struct mpc8xxx_gpio_chip *
-to_mpc8xxx_gpio_chip(struct of_mm_gpio_chip *mm)
-{
- return container_of(mm, struct mpc8xxx_gpio_chip, mm_gc);
-}
-
-static void mpc8xxx_gpio_save_regs(struct of_mm_gpio_chip *mm)
-{
- struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
-
- mpc8xxx_gc->data = in_be32(mm->regs + GPIO_DAT);
-}
-
-/* Workaround GPIO 1 errata on MPC8572/MPC8536. The status of GPIOs
- * defined as output cannot be determined by reading GPDAT register,
- * so we use shadow data register instead. The status of input pins
- * is determined by reading GPDAT register.
- */
-static int mpc8572_gpio_get(struct gpio_chip *gc, unsigned int gpio)
-{
- u32 val;
- struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
- struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
-
- val = in_be32(mm->regs + GPIO_DAT) & ~in_be32(mm->regs + GPIO_DIR);
-
- return (val | mpc8xxx_gc->data) & mpc8xxx_gpio2mask(gpio);
-}
-
-static int mpc8xxx_gpio_get(struct gpio_chip *gc, unsigned int gpio)
-{
- struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
-
- return in_be32(mm->regs + GPIO_DAT) & mpc8xxx_gpio2mask(gpio);
-}
-
-static void mpc8xxx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
-{
- struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
- struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
- unsigned long flags;
-
- spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
-
- if (val)
- mpc8xxx_gc->data |= mpc8xxx_gpio2mask(gpio);
- else
- mpc8xxx_gc->data &= ~mpc8xxx_gpio2mask(gpio);
-
- out_be32(mm->regs + GPIO_DAT, mpc8xxx_gc->data);
-
- spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
-}
-
-static int mpc8xxx_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
-{
- struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
- struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
- unsigned long flags;
-
- spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
-
- clrbits32(mm->regs + GPIO_DIR, mpc8xxx_gpio2mask(gpio));
-
- spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
-
- return 0;
-}
-
-static int mpc8xxx_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
-{
- struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
- struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
- unsigned long flags;
-
- mpc8xxx_gpio_set(gc, gpio, val);
-
- spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
-
- setbits32(mm->regs + GPIO_DIR, mpc8xxx_gpio2mask(gpio));
-
- spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
-
- return 0;
-}
-
-static int mpc8xxx_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
-{
- struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
- struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
-
- if (mpc8xxx_gc->irq && offset < MPC8XXX_GPIO_PINS)
- return irq_create_mapping(mpc8xxx_gc->irq, offset);
- else
- return -ENXIO;
-}
-
-static void mpc8xxx_gpio_irq_cascade(unsigned int irq, struct irq_desc *desc)
-{
- struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_desc_get_handler_data(desc);
- struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
- unsigned int mask;
-
- mask = in_be32(mm->regs + GPIO_IER) & in_be32(mm->regs + GPIO_IMR);
- if (mask)
- generic_handle_irq(irq_linear_revmap(mpc8xxx_gc->irq,
- 32 - ffs(mask)));
-}
-
-static void mpc8xxx_irq_unmask(struct irq_data *d)
-{
- struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d);
- struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
- unsigned long flags;
-
- spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
-
- setbits32(mm->regs + GPIO_IMR, mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
-
- spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
-}
-
-static void mpc8xxx_irq_mask(struct irq_data *d)
-{
- struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d);
- struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
- unsigned long flags;
-
- spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
-
- clrbits32(mm->regs + GPIO_IMR, mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
-
- spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
-}
-
-static void mpc8xxx_irq_ack(struct irq_data *d)
-{
- struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d);
- struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
-
- out_be32(mm->regs + GPIO_IER, mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
-}
-
-static int mpc8xxx_irq_set_type(struct irq_data *d, unsigned int flow_type)
-{
- struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d);
- struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
- unsigned long flags;
-
- switch (flow_type) {
- case IRQ_TYPE_EDGE_FALLING:
- spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
- setbits32(mm->regs + GPIO_ICR,
- mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
- spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
- break;
-
- case IRQ_TYPE_EDGE_BOTH:
- spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
- clrbits32(mm->regs + GPIO_ICR,
- mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
- spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
- break;
-
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int mpc512x_irq_set_type(struct irq_data *d, unsigned int flow_type)
-{
- struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d);
- struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
- unsigned long gpio = irqd_to_hwirq(d);
- void __iomem *reg;
- unsigned int shift;
- unsigned long flags;
-
- if (gpio < 16) {
- reg = mm->regs + GPIO_ICR;
- shift = (15 - gpio) * 2;
- } else {
- reg = mm->regs + GPIO_ICR2;
- shift = (15 - (gpio % 16)) * 2;
- }
-
- switch (flow_type) {
- case IRQ_TYPE_EDGE_FALLING:
- case IRQ_TYPE_LEVEL_LOW:
- spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
- clrsetbits_be32(reg, 3 << shift, 2 << shift);
- spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
- break;
-
- case IRQ_TYPE_EDGE_RISING:
- case IRQ_TYPE_LEVEL_HIGH:
- spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
- clrsetbits_be32(reg, 3 << shift, 1 << shift);
- spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
- break;
-
- case IRQ_TYPE_EDGE_BOTH:
- spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
- clrbits32(reg, 3 << shift);
- spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
- break;
-
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static struct irq_chip mpc8xxx_irq_chip = {
- .name = "mpc8xxx-gpio",
- .irq_unmask = mpc8xxx_irq_unmask,
- .irq_mask = mpc8xxx_irq_mask,
- .irq_ack = mpc8xxx_irq_ack,
- .irq_set_type = mpc8xxx_irq_set_type,
-};
-
-static int mpc8xxx_gpio_irq_map(struct irq_host *h, unsigned int virq,
- irq_hw_number_t hw)
-{
- struct mpc8xxx_gpio_chip *mpc8xxx_gc = h->host_data;
-
- if (mpc8xxx_gc->of_dev_id_data)
- mpc8xxx_irq_chip.irq_set_type = mpc8xxx_gc->of_dev_id_data;
-
- irq_set_chip_data(virq, h->host_data);
- irq_set_chip_and_handler(virq, &mpc8xxx_irq_chip, handle_level_irq);
- irq_set_irq_type(virq, IRQ_TYPE_NONE);
-
- return 0;
-}
-
-static int mpc8xxx_gpio_irq_xlate(struct irq_host *h, struct device_node *ct,
- const u32 *intspec, unsigned int intsize,
- irq_hw_number_t *out_hwirq,
- unsigned int *out_flags)
-
-{
- /* interrupt sense values coming from the device tree equal either
- * EDGE_FALLING or EDGE_BOTH
- */
- *out_hwirq = intspec[0];
- *out_flags = intspec[1];
-
- return 0;
-}
-
-static struct irq_host_ops mpc8xxx_gpio_irq_ops = {
- .map = mpc8xxx_gpio_irq_map,
- .xlate = mpc8xxx_gpio_irq_xlate,
-};
-
-static struct of_device_id mpc8xxx_gpio_ids[] __initdata = {
- { .compatible = "fsl,mpc8349-gpio", },
- { .compatible = "fsl,mpc8572-gpio", },
- { .compatible = "fsl,mpc8610-gpio", },
- { .compatible = "fsl,mpc5121-gpio", .data = mpc512x_irq_set_type, },
- { .compatible = "fsl,qoriq-gpio", },
- {}
-};
-
-static void __init mpc8xxx_add_controller(struct device_node *np)
-{
- struct mpc8xxx_gpio_chip *mpc8xxx_gc;
- struct of_mm_gpio_chip *mm_gc;
- struct gpio_chip *gc;
- const struct of_device_id *id;
- unsigned hwirq;
- int ret;
-
- mpc8xxx_gc = kzalloc(sizeof(*mpc8xxx_gc), GFP_KERNEL);
- if (!mpc8xxx_gc) {
- ret = -ENOMEM;
- goto err;
- }
-
- spin_lock_init(&mpc8xxx_gc->lock);
-
- mm_gc = &mpc8xxx_gc->mm_gc;
- gc = &mm_gc->gc;
-
- mm_gc->save_regs = mpc8xxx_gpio_save_regs;
- gc->ngpio = MPC8XXX_GPIO_PINS;
- gc->direction_input = mpc8xxx_gpio_dir_in;
- gc->direction_output = mpc8xxx_gpio_dir_out;
- if (of_device_is_compatible(np, "fsl,mpc8572-gpio"))
- gc->get = mpc8572_gpio_get;
- else
- gc->get = mpc8xxx_gpio_get;
- gc->set = mpc8xxx_gpio_set;
- gc->to_irq = mpc8xxx_gpio_to_irq;
-
- ret = of_mm_gpiochip_add(np, mm_gc);
- if (ret)
- goto err;
-
- hwirq = irq_of_parse_and_map(np, 0);
- if (hwirq == NO_IRQ)
- goto skip_irq;
-
- mpc8xxx_gc->irq =
- irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, MPC8XXX_GPIO_PINS,
- &mpc8xxx_gpio_irq_ops, MPC8XXX_GPIO_PINS);
- if (!mpc8xxx_gc->irq)
- goto skip_irq;
-
- id = of_match_node(mpc8xxx_gpio_ids, np);
- if (id)
- mpc8xxx_gc->of_dev_id_data = id->data;
-
- mpc8xxx_gc->irq->host_data = mpc8xxx_gc;
-
- /* ack and mask all irqs */
- out_be32(mm_gc->regs + GPIO_IER, 0xffffffff);
- out_be32(mm_gc->regs + GPIO_IMR, 0);
-
- irq_set_handler_data(hwirq, mpc8xxx_gc);
- irq_set_chained_handler(hwirq, mpc8xxx_gpio_irq_cascade);
-
-skip_irq:
- return;
-
-err:
- pr_err("%s: registration failed with status %d\n",
- np->full_name, ret);
- kfree(mpc8xxx_gc);
-
- return;
-}
-
-static int __init mpc8xxx_add_gpiochips(void)
-{
- struct device_node *np;
-
- for_each_matching_node(np, mpc8xxx_gpio_ids)
- mpc8xxx_add_controller(np);
-
- return 0;
-}
-arch_initcall(mpc8xxx_add_gpiochips);
* IPIs are marked IRQ_PER_CPU. This has the side effect of
* preventing the IRQ_PENDING/IRQ_INPROGRESS logic from
* applying to them. We EOI them late to avoid re-entering.
- * We mark IPI's with IRQF_DISABLED as they must run with
- * irqs disabled.
*/
mpic_eoi(mpic);
}
mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0))
| MPIC_GREG_GCONF_MCK);
- /* Read feature register, calculate num CPUs and, for non-ISU
- * MPICs, num sources as well. On ISU MPICs, sources are counted
- * as ISUs are added
+ /*
+ * Read feature register. For non-ISU MPICs, num sources as well. On
+ * ISU MPICs, sources are counted as ISUs are added
*/
greg_feature = mpic_read(mpic->gregs, MPIC_INFO(GREG_FEATURE_0));
- mpic->num_cpus = ((greg_feature & MPIC_GREG_FEATURE_LAST_CPU_MASK)
- >> MPIC_GREG_FEATURE_LAST_CPU_SHIFT) + 1;
if (isu_size == 0) {
if (flags & MPIC_BROKEN_FRR_NIRQS)
mpic->num_sources = mpic->irq_count;
>> MPIC_GREG_FEATURE_LAST_SRC_SHIFT) + 1;
}
+ /*
+ * The MPIC driver will crash if there are more cores than we
+ * can initialize, so we may as well catch that problem here.
+ */
+ BUG_ON(num_possible_cpus() > MPIC_MAX_CPUS);
+
/* Map the per-CPU registers */
- for (i = 0; i < mpic->num_cpus; i++) {
- mpic_map(mpic, node, paddr, &mpic->cpuregs[i],
- MPIC_INFO(CPU_BASE) + i * MPIC_INFO(CPU_STRIDE),
+ for_each_possible_cpu(i) {
+ unsigned int cpu = get_hard_smp_processor_id(i);
+
+ mpic_map(mpic, node, paddr, &mpic->cpuregs[cpu],
+ MPIC_INFO(CPU_BASE) + cpu * MPIC_INFO(CPU_STRIDE),
0x1000);
}
}
printk(KERN_INFO "mpic: Setting up MPIC \"%s\" version %s at %llx,"
" max %d CPUs\n",
- name, vers, (unsigned long long)paddr, mpic->num_cpus);
+ name, vers, (unsigned long long)paddr, num_possible_cpus());
printk(KERN_INFO "mpic: ISU size: %d, shift: %d, mask: %x\n",
mpic->isu_size, mpic->isu_shift, mpic->isu_mask);
struct mpic *mpic = mpic_primary;
u32 pir;
int cpuid = get_hard_smp_processor_id(cpu);
+ int i;
/* Set target bit for core reset */
pir = mpic_read(mpic->gregs, MPIC_INFO(GREG_PROCESSOR_INIT));
pir &= ~(1 << cpuid);
mpic_write(mpic->gregs, MPIC_INFO(GREG_PROCESSOR_INIT), pir);
mpic_read(mpic->gregs, MPIC_INFO(GREG_PROCESSOR_INIT));
+
+ /* Perform 15 EOI on each reset core to clear pending interrupts.
+ * This is required for FSL CoreNet based devices */
+ if (mpic->flags & MPIC_FSL) {
+ for (i = 0; i < 15; i++) {
+ _mpic_write(mpic->reg_type, &mpic->cpuregs[cpuid],
+ MPIC_CPU_EOI, 0);
+ }
+ }
}
#endif /* CONFIG_SMP */
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/stat.h>
#include <linux/pci.h>
#include <asm/prom.h>
#include <linux/slab.h>
#include <linux/completion.h>
#include <linux/spinlock.h>
+#include <linux/module.h>
#include <linux/workqueue.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
#include <linux/msi.h>
#include <linux/of_platform.h>
#include <linux/interrupt.h>
+#include <linux/export.h>
#include <asm/prom.h>
#include <asm/hw_irq.h>
#include <asm/ppc-pci.h>
return 3;
}
-static int ppc440spe_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+static int __init ppc440spe_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
{
u32 val = 1 << 24;
return ppc4xx_pciex_port_reset_sdr(port);
}
-static int ppc440speA_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+static int __init ppc440speA_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
{
return ppc440spe_pciex_init_port_hw(port);
}
-static int ppc440speB_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+static int __init ppc440speB_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
{
int rc = ppc440spe_pciex_init_port_hw(port);
return 2;
}
-static int ppc460ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+static int __init ppc460ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
{
u32 val;
u32 utlset1;
mtdcri(SDR0, PESDR1_460SX_HSSSLEW, 0xFFFF0000);
mtdcri(SDR0, PESDR2_460SX_HSSSLEW, 0xFFFF0000);
+ /* Set HSS PRBS enabled */
+ mtdcri(SDR0, PESDR0_460SX_HSSCTLSET, 0x00001130);
+ mtdcri(SDR0, PESDR2_460SX_HSSCTLSET, 0x00001130);
+
udelay(100);
/* De-assert PLLRESET */
return 2;
}
-static int ppc460sx_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+static int __init ppc460sx_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
{
if (port->endpoint)
dcri_clrset(SDR0, port->sdr_base + PESDRn_UTLSET2,
0, 0x01000000);
- /*Gen-1*/
- mtdcri(SDR0, port->sdr_base + PESDRn_460SX_RCEI, 0x08000000);
-
dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET,
(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL),
PESDRx_RCSSET_RSTPYN);
{
/* Max 128 Bytes */
out_be32 (port->utl_base + PEUTL_PBBSZ, 0x00000000);
+ /* Assert VRB and TXE - per datasheet turn off addr validation */
+ out_be32(port->utl_base + PEUTL_PCTL, 0x80800000);
return 0;
}
+static void __init ppc460sx_pciex_check_link(struct ppc4xx_pciex_port *port)
+{
+ void __iomem *mbase;
+ int attempt = 50;
+
+ port->link = 0;
+
+ mbase = ioremap(port->cfg_space.start + 0x10000000, 0x1000);
+ if (mbase == NULL) {
+ printk(KERN_ERR "%s: Can't map internal config space !",
+ port->node->full_name);
+ goto done;
+ }
+
+ while (attempt && (0 == (in_le32(mbase + PECFG_460SX_DLLSTA)
+ & PECFG_460SX_DLLSTA_LINKUP))) {
+ attempt--;
+ mdelay(10);
+ }
+ if (attempt)
+ port->link = 1;
+done:
+ iounmap(mbase);
+
+}
+
static struct ppc4xx_pciex_hwops ppc460sx_pcie_hwops __initdata = {
.core_init = ppc460sx_pciex_core_init,
.port_init_hw = ppc460sx_pciex_init_port_hw,
.setup_utl = ppc460sx_pciex_init_utl,
- .check_link = ppc4xx_pciex_check_link_sdr,
+ .check_link = ppc460sx_pciex_check_link,
};
#endif /* CONFIG_44x */
mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x00101000);
}
-static int ppc405ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+static int __init ppc405ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
{
u32 val;
if (rc != 0)
return rc;
- if (ppc4xx_pciex_hwops->check_link)
- ppc4xx_pciex_hwops->check_link(port);
-
/*
* Initialize mapping: disable all regions and configure
* CFG and REG regions based on resources in the device tree
*/
ppc4xx_pciex_port_init_mapping(port);
+ if (ppc4xx_pciex_hwops->check_link)
+ ppc4xx_pciex_hwops->check_link(port);
+
/*
* Map UTL
*/
ppc4xx_pciex_hwops->setup_utl(port);
/*
- * Check for VC0 active and assert RDY.
+ * Check for VC0 active or PLL Locked and assert RDY.
*/
if (port->sdr_base) {
- if (port->link &&
- ppc4xx_pciex_wait_on_sdr(port, PESDRn_RCSSTS,
- 1 << 16, 1 << 16, 5000)) {
- printk(KERN_INFO "PCIE%d: VC0 not active\n", port->index);
+ if (of_device_is_compatible(port->node,
+ "ibm,plb-pciex-460sx")){
+ if (port->link && ppc4xx_pciex_wait_on_sdr(port,
+ PESDRn_RCSSTS,
+ 1 << 12, 1 << 12, 5000)) {
+ printk(KERN_INFO "PCIE%d: PLL not locked\n",
+ port->index);
+ port->link = 0;
+ }
+ } else if (port->link &&
+ ppc4xx_pciex_wait_on_sdr(port, PESDRn_RCSSTS,
+ 1 << 16, 1 << 16, 5000)) {
+ printk(KERN_INFO "PCIE%d: VC0 not active\n",
+ port->index);
port->link = 0;
}
dcr_write(port->dcrs, DCRO_PEGPL_OMR1BAH, lah);
dcr_write(port->dcrs, DCRO_PEGPL_OMR1BAL, lal);
dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKH, 0x7fffffff);
- /* Note that 3 here means enabled | single region */
- dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL, sa | 3);
+ /*Enabled and single region */
+ if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx"))
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL,
+ sa | DCRO_PEGPL_460SX_OMR1MSKL_UOT
+ | DCRO_PEGPL_OMRxMSKL_VAL);
+ else
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL,
+ sa | DCRO_PEGPL_OMR1MSKL_UOT
+ | DCRO_PEGPL_OMRxMSKL_VAL);
break;
case 1:
out_le32(mbase + PECFG_POM1LAH, pciah);
dcr_write(port->dcrs, DCRO_PEGPL_OMR2BAH, lah);
dcr_write(port->dcrs, DCRO_PEGPL_OMR2BAL, lal);
dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKH, 0x7fffffff);
- /* Note that 3 here means enabled | single region */
- dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKL, sa | 3);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKL,
+ sa | DCRO_PEGPL_OMRxMSKL_VAL);
break;
case 2:
out_le32(mbase + PECFG_POM2LAH, pciah);
dcr_write(port->dcrs, DCRO_PEGPL_OMR3BAL, lal);
dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKH, 0x7fffffff);
/* Note that 3 here means enabled | IO space !!! */
- dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKL, sa | 3);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKL,
+ sa | DCRO_PEGPL_OMR3MSKL_IO
+ | DCRO_PEGPL_OMRxMSKL_VAL);
break;
}
if (res->flags & IORESOURCE_PREFETCH)
sa |= 0x8;
+ if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx"))
+ sa |= PCI_BASE_ADDRESS_MEM_TYPE_64;
+
out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa));
out_le32(mbase + PECFG_BAR0LMPA, RES_TO_U32_LOW(sa));
}
out_le16(mbase + 0x202, val);
+ /* Enable Bus master, memory, and io space */
+ if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx"))
+ out_le16(mbase + 0x204, 0x7);
+
if (!port->endpoint) {
/* Set Class Code to PCI-PCI bridge and Revision Id to 1 */
out_le32(mbase + 0x208, 0x06040001);
#define PECFG_POM2LAL 0x390
#define PECFG_POM2LAH 0x394
+/* 460sx only */
+#define PECFG_460SX_DLLSTA 0x3f8
+
+/* 460sx Bit Mappings */
+#define PECFG_460SX_DLLSTA_LINKUP 0x00000010
+#define DCRO_PEGPL_460SX_OMR1MSKL_UOT 0x00000004
+
+/* PEGPL Bit Mappings */
+#define DCRO_PEGPL_OMRxMSKL_VAL 0x00000001
+#define DCRO_PEGPL_OMR1MSKL_UOT 0x00000002
+#define DCRO_PEGPL_OMR3MSKL_IO 0x00000002
+
/* SDR Bit Mappings */
#define PESDRx_RCSSET_HLDPLB 0x10000000
#define PESDRx_RCSSET_RSTGU 0x01000000
}
/* Install error handler */
- if (request_irq(irq, l2c_error_handler, IRQF_DISABLED, "L2C", 0) < 0) {
+ if (request_irq(irq, l2c_error_handler, 0, "L2C", 0) < 0) {
printk(KERN_ERR "Cannot install L2C error handler"
", cache is not enabled\n");
of_node_put(np);
#include <linux/of_gpio.h>
#include <linux/gpio.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <asm/qe.h>
struct qe_gpio_chip {
#include <linux/errno.h>
#include <linux/stddef.h>
#include <linux/spinlock.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <linux/stddef.h>
#include <linux/interrupt.h>
#include <linux/err.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <asm/io.h>
#include <asm/immap_qe.h>
#include <linux/stddef.h>
#include <linux/interrupt.h>
#include <linux/err.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <asm/io.h>
#include <asm/immap_qe.h>
#include <linux/kernel.h>
#include <linux/errno.h>
+#include <linux/export.h>
#include <linux/io.h>
#include <asm/immap_qe.h>
#include <asm/qe.h>
#include <linux/platform_device.h>
#include <linux/err.h>
#include <linux/init.h>
+#include <linux/module.h>
#include <linux/mc146818rtc.h>
#include <asm/prom.h>
#include <linux/kernel.h>
#include <linux/debugfs.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <asm/prom.h>
#include <asm/scom.h>
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/types.h>
#include <linux/ioport.h>
#include <linux/major.h>
#include <linux/delay.h>
#include <linux/irq.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/of_net.h>
obj-$(CONFIG_PPC_ICP_NATIVE) += icp-native.o
obj-$(CONFIG_PPC_ICP_HV) += icp-hv.o
obj-$(CONFIG_PPC_ICS_RTAS) += ics-rtas.o
+obj-$(CONFIG_PPC_POWERNV) += ics-opal.o
#endif
};
-int icp_native_init(void)
+int __init icp_native_init(void)
{
struct device_node *np;
u32 indx = 0;
--- /dev/null
+/*
+ * ICS backend for OPAL managed interrupts.
+ *
+ * Copyright 2011 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#undef DEBUG
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/cpu.h>
+#include <linux/of.h>
+#include <linux/spinlock.h>
+#include <linux/msi.h>
+
+#include <asm/prom.h>
+#include <asm/smp.h>
+#include <asm/machdep.h>
+#include <asm/irq.h>
+#include <asm/errno.h>
+#include <asm/xics.h>
+#include <asm/opal.h>
+#include <asm/firmware.h>
+
+static int ics_opal_mangle_server(int server)
+{
+ /* No link for now */
+ return server << 2;
+}
+
+static int ics_opal_unmangle_server(int server)
+{
+ /* No link for now */
+ return server >> 2;
+}
+
+static void ics_opal_unmask_irq(struct irq_data *d)
+{
+ unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
+ int64_t rc;
+ int server;
+
+ pr_devel("ics-hal: unmask virq %d [hw 0x%x]\n", d->irq, hw_irq);
+
+ if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
+ return;
+
+ server = xics_get_irq_server(d->irq, d->affinity, 0);
+ server = ics_opal_mangle_server(server);
+
+ rc = opal_set_xive(hw_irq, server, DEFAULT_PRIORITY);
+ if (rc != OPAL_SUCCESS)
+ pr_err("%s: opal_set_xive(irq=%d [hw 0x%x] server=%x)"
+ " error %lld\n",
+ __func__, d->irq, hw_irq, server, rc);
+}
+
+static unsigned int ics_opal_startup(struct irq_data *d)
+{
+#ifdef CONFIG_PCI_MSI
+ /*
+ * The generic MSI code returns with the interrupt disabled on the
+ * card, using the MSI mask bits. Firmware doesn't appear to unmask
+ * at that level, so we do it here by hand.
+ */
+ if (d->msi_desc)
+ unmask_msi_irq(d);
+#endif
+
+ /* unmask it */
+ ics_opal_unmask_irq(d);
+ return 0;
+}
+
+static void ics_opal_mask_real_irq(unsigned int hw_irq)
+{
+ int server = ics_opal_mangle_server(xics_default_server);
+ int64_t rc;
+
+ if (hw_irq == XICS_IPI)
+ return;
+
+ /* Have to set XIVE to 0xff to be able to remove a slot */
+ rc = opal_set_xive(hw_irq, server, 0xff);
+ if (rc != OPAL_SUCCESS)
+ pr_err("%s: opal_set_xive(0xff) irq=%u returned %lld\n",
+ __func__, hw_irq, rc);
+}
+
+static void ics_opal_mask_irq(struct irq_data *d)
+{
+ unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
+
+ pr_devel("ics-hal: mask virq %d [hw 0x%x]\n", d->irq, hw_irq);
+
+ if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
+ return;
+ ics_opal_mask_real_irq(hw_irq);
+}
+
+static int ics_opal_set_affinity(struct irq_data *d,
+ const struct cpumask *cpumask,
+ bool force)
+{
+ unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
+ int16_t server;
+ int8_t priority;
+ int64_t rc;
+ int wanted_server;
+
+ if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
+ return -1;
+
+ rc = opal_get_xive(hw_irq, &server, &priority);
+ if (rc != OPAL_SUCCESS) {
+ pr_err("%s: opal_set_xive(irq=%d [hw 0x%x] server=%x)"
+ " error %lld\n",
+ __func__, d->irq, hw_irq, server, rc);
+ return -1;
+ }
+
+ wanted_server = xics_get_irq_server(d->irq, cpumask, 1);
+ if (wanted_server < 0) {
+ char cpulist[128];
+ cpumask_scnprintf(cpulist, sizeof(cpulist), cpumask);
+ pr_warning("%s: No online cpus in the mask %s for irq %d\n",
+ __func__, cpulist, d->irq);
+ return -1;
+ }
+ server = ics_opal_mangle_server(wanted_server);
+
+ pr_devel("ics-hal: set-affinity irq %d [hw 0x%x] server: 0x%x/0x%x\n",
+ d->irq, hw_irq, wanted_server, server);
+
+ rc = opal_set_xive(hw_irq, server, priority);
+ if (rc != OPAL_SUCCESS) {
+ pr_err("%s: opal_set_xive(irq=%d [hw 0x%x] server=%x)"
+ " error %lld\n",
+ __func__, d->irq, hw_irq, server, rc);
+ return -1;
+ }
+ return 0;
+}
+
+static struct irq_chip ics_opal_irq_chip = {
+ .name = "OPAL ICS",
+ .irq_startup = ics_opal_startup,
+ .irq_mask = ics_opal_mask_irq,
+ .irq_unmask = ics_opal_unmask_irq,
+ .irq_eoi = NULL, /* Patched at init time */
+ .irq_set_affinity = ics_opal_set_affinity
+};
+
+static int ics_opal_map(struct ics *ics, unsigned int virq);
+static void ics_opal_mask_unknown(struct ics *ics, unsigned long vec);
+static long ics_opal_get_server(struct ics *ics, unsigned long vec);
+
+static int ics_opal_host_match(struct ics *ics, struct device_node *node)
+{
+ return 1;
+}
+
+/* Only one global & state struct ics */
+static struct ics ics_hal = {
+ .map = ics_opal_map,
+ .mask_unknown = ics_opal_mask_unknown,
+ .get_server = ics_opal_get_server,
+ .host_match = ics_opal_host_match,
+};
+
+static int ics_opal_map(struct ics *ics, unsigned int virq)
+{
+ unsigned int hw_irq = (unsigned int)virq_to_hw(virq);
+ int64_t rc;
+ int16_t server;
+ int8_t priority;
+
+ if (WARN_ON(hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS))
+ return -EINVAL;
+
+ /* Check if HAL knows about this interrupt */
+ rc = opal_get_xive(hw_irq, &server, &priority);
+ if (rc != OPAL_SUCCESS)
+ return -ENXIO;
+
+ irq_set_chip_and_handler(virq, &ics_opal_irq_chip, handle_fasteoi_irq);
+ irq_set_chip_data(virq, &ics_hal);
+
+ return 0;
+}
+
+static void ics_opal_mask_unknown(struct ics *ics, unsigned long vec)
+{
+ int64_t rc;
+ int16_t server;
+ int8_t priority;
+
+ /* Check if HAL knows about this interrupt */
+ rc = opal_get_xive(vec, &server, &priority);
+ if (rc != OPAL_SUCCESS)
+ return;
+
+ ics_opal_mask_real_irq(vec);
+}
+
+static long ics_opal_get_server(struct ics *ics, unsigned long vec)
+{
+ int64_t rc;
+ int16_t server;
+ int8_t priority;
+
+ /* Check if HAL knows about this interrupt */
+ rc = opal_get_xive(vec, &server, &priority);
+ if (rc != OPAL_SUCCESS)
+ return -1;
+ return ics_opal_unmangle_server(server);
+}
+
+int __init ics_opal_init(void)
+{
+ if (!firmware_has_feature(FW_FEATURE_OPAL))
+ return -ENODEV;
+
+ /* We need to patch our irq chip's EOI to point to the
+ * right ICP
+ */
+ ics_opal_irq_chip.irq_eoi = icp_ops->eoi;
+
+ /* Register ourselves */
+ xics_register_ics(&ics_hal);
+
+ pr_info("ICS OPAL backend registered\n");
+
+ return 0;
+}
BUG_ON(ipi == NO_IRQ);
/*
- * IPIs are marked IRQF_DISABLED as they must run with irqs
- * disabled, and PERCPU. The handler was set in map.
+ * IPIs are marked IRQF_PERCPU. The handler was set in map.
*/
BUG_ON(request_irq(ipi, icp_ops->ipi_action,
- IRQF_DISABLED|IRQF_PERCPU, "IPI", NULL));
+ IRQF_PERCPU, "IPI", NULL));
}
int __init xics_smp_probe(void)
int rc = -1;
/* Fist locate ICP */
-#ifdef CONFIG_PPC_ICP_HV
if (firmware_has_feature(FW_FEATURE_LPAR))
rc = icp_hv_init();
-#endif
-#ifdef CONFIG_PPC_ICP_NATIVE
if (rc < 0)
rc = icp_native_init();
-#endif
if (rc < 0) {
pr_warning("XICS: Cannot find a Presentation Controller !\n");
return;
xics_ipi_chip.irq_eoi = icp_ops->eoi;
/* Now locate ICS */
-#ifdef CONFIG_PPC_ICS_RTAS
rc = ics_rtas_init();
-#endif
+ if (rc < 0)
+ rc = ics_opal_init();
if (rc < 0)
pr_warning("XICS: Cannot find a Source Controller !\n");
#include <linux/delay.h>
#include <linux/kallsyms.h>
#include <linux/cpumask.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/sysrq.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
static inline int unrecoverable_excp(struct pt_regs *regs)
{
-#ifdef CONFIG_4xx
- /* We have no MSR_RI bit on 4xx, so we simply return false */
+#if defined(CONFIG_4xx) || defined(CONFIG_BOOK3E)
+ /* We have no MSR_RI bit on 4xx or Book3e, so we simply return false */
return 0;
#else
return ((regs->msr & MSR_RI) == 0);
config CRASH_DUMP
bool "kernel crash dumps"
depends on 64BIT
+ select KEXEC
help
Generate crash dump after being started by kexec.
Crash dump kernels are loaded in the main kernel with kexec-tools
if (facility_mask & CRYPT_S390_MSA && !test_facility(17))
return 0;
- if (facility_mask & CRYPT_S390_MSA3 && !test_facility(76))
+
+ if (facility_mask & CRYPT_S390_MSA3 &&
+ (!test_facility(2) || !test_facility(76)))
return 0;
- if (facility_mask & CRYPT_S390_MSA4 && !test_facility(77))
+ if (facility_mask & CRYPT_S390_MSA4 &&
+ (!test_facility(2) || !test_facility(77)))
return 0;
switch (func & CRYPT_S390_OP_MASK) {
*/
#include <crypto/internal/hash.h>
+#include <linux/module.h>
#include "sha.h"
#include "crypt_s390.h"
#define KVM_HPAGE_MASK(x) (~(KVM_HPAGE_SIZE(x) - 1))
#define KVM_PAGES_PER_HPAGE(x) (KVM_HPAGE_SIZE(x) / PAGE_SIZE)
-#define CPUSTAT_HOST 0x80000000
+#define CPUSTAT_STOPPED 0x80000000
#define CPUSTAT_WAIT 0x10000000
#define CPUSTAT_ECALL_PEND 0x08000000
#define CPUSTAT_STOP_INT 0x04000000
u32 instruction_stfl;
u32 instruction_tprot;
u32 instruction_sigp_sense;
+ u32 instruction_sigp_sense_running;
u32 instruction_sigp_external_call;
u32 instruction_sigp_emergency;
u32 instruction_sigp_stop;
unsigned long address, bits;
unsigned char skey;
+ if (!pte_present(*ptep))
+ return pgste;
address = pte_val(*ptep) & PAGE_MASK;
skey = page_get_storage_key(address);
bits = skey & (_PAGE_CHANGED | _PAGE_REFERENCED);
#ifdef CONFIG_PGSTE
int young;
+ if (!pte_present(*ptep))
+ return pgste;
young = page_reset_referenced(pte_val(*ptep) & PAGE_MASK);
/* Transfer page referenced bit to pte software bit (host view) */
if (young || (pgste_val(pgste) & RCP_HR_BIT))
}
-static inline void pgste_set_pte(pte_t *ptep, pgste_t pgste)
+static inline void pgste_set_pte(pte_t *ptep, pgste_t pgste, pte_t entry)
{
#ifdef CONFIG_PGSTE
unsigned long address;
unsigned long okey, nkey;
- address = pte_val(*ptep) & PAGE_MASK;
+ if (!pte_present(entry))
+ return;
+ address = pte_val(entry) & PAGE_MASK;
okey = nkey = page_get_storage_key(address);
nkey &= ~(_PAGE_ACC_BITS | _PAGE_FP_BIT);
/* Set page access key and fetch protection bit from pgste */
if (mm_has_pgste(mm)) {
pgste = pgste_get_lock(ptep);
- pgste_set_pte(ptep, pgste);
+ pgste_set_pte(ptep, pgste, entry);
*ptep = entry;
pgste_set_unlock(ptep, pgste);
} else
#define MACHINE_FLAG_LPAR (1UL << 12)
#define MACHINE_FLAG_SPP (1UL << 13)
#define MACHINE_FLAG_TOPOLOGY (1UL << 14)
+#define MACHINE_FLAG_STCKF (1UL << 15)
#define MACHINE_IS_VM (S390_lowcore.machine_flags & MACHINE_FLAG_VM)
#define MACHINE_IS_KVM (S390_lowcore.machine_flags & MACHINE_FLAG_KVM)
#define MACHINE_HAS_PFMF (0)
#define MACHINE_HAS_SPP (0)
#define MACHINE_HAS_TOPOLOGY (0)
+#define MACHINE_HAS_STCKF (0)
#else /* __s390x__ */
#define MACHINE_HAS_IEEE (1)
#define MACHINE_HAS_CSP (1)
#define MACHINE_HAS_PFMF (S390_lowcore.machine_flags & MACHINE_FLAG_PFMF)
#define MACHINE_HAS_SPP (S390_lowcore.machine_flags & MACHINE_FLAG_SPP)
#define MACHINE_HAS_TOPOLOGY (S390_lowcore.machine_flags & MACHINE_FLAG_TOPOLOGY)
+#define MACHINE_HAS_STCKF (S390_lowcore.machine_flags & MACHINE_FLAG_STCKF)
#endif /* __s390x__ */
#define ZFCPDUMP_HSA_SIZE (32UL<<20)
{
unsigned long long clk;
- if (test_facility(25))
+ if (MACHINE_HAS_STCKF)
asm volatile(".insn s,0xb27c0000,%0" : "=Q" (clk) : : "cc");
else
clk = get_clock();
#define __NR_clock_adjtime 337
#define __NR_syncfs 338
#define __NR_setns 339
-#define NR_syscalls 340
+#define __NR_process_vm_readv 340
+#define __NR_process_vm_writev 341
+#define NR_syscalls 342
/*
* There are some system calls that are not present on 64 bit, some
lgfr %r2,%r2 # int
lgfr %r3,%r3 # int
jg sys_setns
+
+ENTRY(compat_sys_process_vm_readv_wrapper)
+ lgfr %r2,%r2 # compat_pid_t
+ llgtr %r3,%r3 # struct compat_iovec __user *
+ llgfr %r4,%r4 # unsigned long
+ llgtr %r5,%r5 # struct compat_iovec __user *
+ llgfr %r6,%r6 # unsigned long
+ llgf %r0,164(%r15) # unsigned long
+ stg %r0,160(%r15)
+ jg sys_process_vm_readv
+
+ENTRY(compat_sys_process_vm_writev_wrapper)
+ lgfr %r2,%r2 # compat_pid_t
+ llgtr %r3,%r3 # struct compat_iovec __user *
+ llgfr %r4,%r4 # unsigned long
+ llgtr %r5,%r5 # struct compat_iovec __user *
+ llgfr %r6,%r6 # unsigned long
+ llgf %r0,164(%r15) # unsigned long
+ stg %r0,160(%r15)
+ jg sys_process_vm_writev
S390_lowcore.machine_flags |= MACHINE_FLAG_MVCOS;
if (test_facility(40))
S390_lowcore.machine_flags |= MACHINE_FLAG_SPP;
+ if (test_facility(25))
+ S390_lowcore.machine_flags |= MACHINE_FLAG_STCKF;
#endif
}
} __packed;
struct insn_args {
- unsigned long *target;
- struct insn *insn;
- ssize_t size;
+ struct jump_entry *entry;
+ enum jump_label_type type;
};
-static int __arch_jump_label_transform(void *data)
+static void __jump_label_transform(struct jump_entry *entry,
+ enum jump_label_type type)
{
- struct insn_args *args = data;
- int rc;
-
- rc = probe_kernel_write(args->target, args->insn, args->size);
- WARN_ON_ONCE(rc < 0);
- return 0;
-}
-
-void arch_jump_label_transform(struct jump_entry *entry,
- enum jump_label_type type)
-{
- struct insn_args args;
struct insn insn;
+ int rc;
if (type == JUMP_LABEL_ENABLE) {
/* brcl 15,offset */
insn.offset = 0;
}
- args.target = (void *) entry->code;
- args.insn = &insn;
- args.size = JUMP_LABEL_NOP_SIZE;
+ rc = probe_kernel_write((void *)entry->code, &insn, JUMP_LABEL_NOP_SIZE);
+ WARN_ON_ONCE(rc < 0);
+}
- stop_machine(__arch_jump_label_transform, &args, NULL);
+static int __sm_arch_jump_label_transform(void *data)
+{
+ struct insn_args *args = data;
+
+ __jump_label_transform(args->entry, args->type);
+ return 0;
+}
+
+void arch_jump_label_transform(struct jump_entry *entry,
+ enum jump_label_type type)
+{
+ struct insn_args args;
+
+ args.entry = entry;
+ args.type = type;
+
+ stop_machine(__sm_arch_jump_label_transform, &args, NULL);
+}
+
+void arch_jump_label_transform_static(struct jump_entry *entry,
+ enum jump_label_type type)
+{
+ __jump_label_transform(entry, type);
}
#endif
if (ipl_info.type != IPL_TYPE_FCP_DUMP)
return;
+ if (OLDMEM_BASE)
+ return;
if (console_devno != -1)
sprintf(str, " cio_ignore=all,!0.0.%04x,!0.0.%04x",
ipl_info.data.fcp.dev_id.devno, console_devno);
#ifdef CONFIG_ZFCPDUMP
- if (ipl_info.type == IPL_TYPE_FCP_DUMP) {
+ if (ipl_info.type == IPL_TYPE_FCP_DUMP && !OLDMEM_BASE) {
memory_end = ZFCPDUMP_HSA_SIZE;
memory_end_set = 1;
}
SYSCALL(sys_clock_adjtime,sys_clock_adjtime,compat_sys_clock_adjtime_wrapper)
SYSCALL(sys_syncfs,sys_syncfs,sys_syncfs_wrapper)
SYSCALL(sys_setns,sys_setns,sys_setns_wrapper)
+SYSCALL(sys_process_vm_readv,sys_process_vm_readv,compat_sys_process_vm_readv_wrapper) /* 340 */
+SYSCALL(sys_process_vm_writev,sys_process_vm_writev,compat_sys_process_vm_writev_wrapper)
return mask;
}
-static void add_cpus_to_mask(struct topology_cpu *tl_cpu,
- struct mask_info *book, struct mask_info *core)
+static struct mask_info *add_cpus_to_mask(struct topology_cpu *tl_cpu,
+ struct mask_info *book,
+ struct mask_info *core,
+ int z10)
{
unsigned int cpu;
cpu_book_id[lcpu] = book->id;
#endif
cpumask_set_cpu(lcpu, &core->mask);
- cpu_core_id[lcpu] = core->id;
+ if (z10) {
+ cpu_core_id[lcpu] = rcpu;
+ core = core->next;
+ } else {
+ cpu_core_id[lcpu] = core->id;
+ }
smp_cpu_polarization[lcpu] = tl_cpu->pp;
}
}
+ return core;
}
static void clear_masks(void)
{
#ifdef CONFIG_SCHED_BOOK
struct mask_info *book = &book_info;
+ struct cpuid cpu_id;
#else
struct mask_info *book = NULL;
#endif
struct mask_info *core = &core_info;
union topology_entry *tle, *end;
+ int z10 = 0;
-
+#ifdef CONFIG_SCHED_BOOK
+ get_cpu_id(&cpu_id);
+ z10 = cpu_id.machine == 0x2097 || cpu_id.machine == 0x2098;
+#endif
spin_lock_irq(&topology_lock);
clear_masks();
tle = info->tle;
end = (union topology_entry *)((unsigned long)info + info->length);
while (tle < end) {
+#ifdef CONFIG_SCHED_BOOK
+ if (z10) {
+ switch (tle->nl) {
+ case 1:
+ book = book->next;
+ book->id = tle->container.id;
+ break;
+ case 0:
+ core = add_cpus_to_mask(&tle->cpu, book, core, z10);
+ break;
+ default:
+ clear_masks();
+ goto out;
+ }
+ tle = next_tle(tle);
+ continue;
+ }
+#endif
switch (tle->nl) {
#ifdef CONFIG_SCHED_BOOK
case 2:
core->id = tle->container.id;
break;
case 0:
- add_cpus_to_mask(&tle->cpu, book, core);
+ add_cpus_to_mask(&tle->cpu, book, core, z10);
break;
default:
clear_masks();
for (i = 0; i < TOPOLOGY_NR_MAG; i++)
printk(" %d", info->mag[i]);
printk(" / %d\n", info->mnest);
- alloc_masks(info, &core_info, 2);
+ alloc_masks(info, &core_info, 1);
#ifdef CONFIG_SCHED_BOOK
- alloc_masks(info, &book_info, 3);
+ alloc_masks(info, &book_info, 2);
#endif
}
NOTES :text :note
+ .dummy : { *(.dummy) } :data
+
RODATA
#ifdef CONFIG_SHARED_KERNEL
return -EOPNOTSUPP;
}
- atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
+ atomic_set_mask(CPUSTAT_STOPPED, &vcpu->arch.sie_block->cpuflags);
vcpu->run->s390_reset_flags |= KVM_S390_RESET_SUBSYSTEM;
vcpu->run->s390_reset_flags |= KVM_S390_RESET_IPL;
vcpu->run->s390_reset_flags |= KVM_S390_RESET_CPU_INIT;
int rc = 0;
vcpu->stat.exit_stop_request++;
- atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
spin_lock_bh(&vcpu->arch.local_int.lock);
if (vcpu->arch.local_int.action_bits & ACTION_STORE_ON_STOP) {
vcpu->arch.local_int.action_bits &= ~ACTION_STORE_ON_STOP;
}
if (vcpu->arch.local_int.action_bits & ACTION_STOP_ON_STOP) {
+ atomic_set_mask(CPUSTAT_STOPPED,
+ &vcpu->arch.sie_block->cpuflags);
vcpu->arch.local_int.action_bits &= ~ACTION_STOP_ON_STOP;
VCPU_EVENT(vcpu, 3, "%s", "cpu stopped");
rc = -EOPNOTSUPP;
offsetof(struct _lowcore, restart_psw), sizeof(psw_t));
if (rc == -EFAULT)
exception = 1;
+ atomic_clear_mask(CPUSTAT_STOPPED, &vcpu->arch.sie_block->cpuflags);
break;
case KVM_S390_PROGRAM_INT:
{ "instruction_stfl", VCPU_STAT(instruction_stfl) },
{ "instruction_tprot", VCPU_STAT(instruction_tprot) },
{ "instruction_sigp_sense", VCPU_STAT(instruction_sigp_sense) },
+ { "instruction_sigp_sense_running", VCPU_STAT(instruction_sigp_sense_running) },
{ "instruction_sigp_external_call", VCPU_STAT(instruction_sigp_external_call) },
{ "instruction_sigp_emergency", VCPU_STAT(instruction_sigp_emergency) },
{ "instruction_sigp_stop", VCPU_STAT(instruction_sigp_stop) },
switch (ext) {
case KVM_CAP_S390_PSW:
case KVM_CAP_S390_GMAP:
+ case KVM_CAP_SYNC_MMU:
r = 1;
break;
default:
restore_fp_regs(&vcpu->arch.guest_fpregs);
restore_access_regs(vcpu->arch.guest_acrs);
gmap_enable(vcpu->arch.gmap);
+ atomic_set_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
}
void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
{
+ atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
gmap_disable(vcpu->arch.gmap);
save_fp_regs(&vcpu->arch.guest_fpregs);
save_access_regs(vcpu->arch.guest_acrs);
int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
{
- atomic_set(&vcpu->arch.sie_block->cpuflags, CPUSTAT_ZARCH | CPUSTAT_SM);
+ atomic_set(&vcpu->arch.sie_block->cpuflags, CPUSTAT_ZARCH |
+ CPUSTAT_SM |
+ CPUSTAT_STOPPED);
vcpu->arch.sie_block->ecb = 6;
vcpu->arch.sie_block->eca = 0xC1002001U;
vcpu->arch.sie_block->fac = (int) (long) facilities;
{
int rc = 0;
- if (atomic_read(&vcpu->arch.sie_block->cpuflags) & CPUSTAT_RUNNING)
+ if (!(atomic_read(&vcpu->arch.sie_block->cpuflags) & CPUSTAT_STOPPED))
rc = -EBUSY;
else {
vcpu->run->psw_mask = psw.mask;
if (vcpu->sigset_active)
sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved);
- atomic_set_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
+ atomic_clear_mask(CPUSTAT_STOPPED, &vcpu->arch.sie_block->cpuflags);
BUG_ON(vcpu->kvm->arch.float_int.local_int[vcpu->vcpu_id] == NULL);
u64 address1 = disp1 + base1 ? vcpu->arch.guest_gprs[base1] : 0;
u64 address2 = disp2 + base2 ? vcpu->arch.guest_gprs[base2] : 0;
struct vm_area_struct *vma;
+ unsigned long user_address;
vcpu->stat.instruction_tprot++;
return -EOPNOTSUPP;
+ /* we must resolve the address without holding the mmap semaphore.
+ * This is ok since the userspace hypervisor is not supposed to change
+ * the mapping while the guest queries the memory. Otherwise the guest
+ * might crash or get wrong info anyway. */
+ user_address = (unsigned long) __guestaddr_to_user(vcpu, address1);
+
down_read(¤t->mm->mmap_sem);
- vma = find_vma(current->mm,
- (unsigned long) __guestaddr_to_user(vcpu, address1));
+ vma = find_vma(current->mm, user_address);
if (!vma) {
up_read(¤t->mm->mmap_sem);
return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
#define SIGP_SET_PREFIX 0x0d
#define SIGP_STORE_STATUS_ADDR 0x0e
#define SIGP_SET_ARCH 0x12
+#define SIGP_SENSE_RUNNING 0x15
/* cpu status bits */
#define SIGP_STAT_EQUIPMENT_CHECK 0x80000000UL
+#define SIGP_STAT_NOT_RUNNING 0x00000400UL
#define SIGP_STAT_INCORRECT_STATE 0x00000200UL
#define SIGP_STAT_INVALID_PARAMETER 0x00000100UL
#define SIGP_STAT_EXT_CALL_PENDING 0x00000080UL
spin_lock(&fi->lock);
if (fi->local_int[cpu_addr] == NULL)
rc = 3; /* not operational */
- else if (atomic_read(fi->local_int[cpu_addr]->cpuflags)
- & CPUSTAT_RUNNING) {
+ else if (!(atomic_read(fi->local_int[cpu_addr]->cpuflags)
+ & CPUSTAT_STOPPED)) {
*reg &= 0xffffffff00000000UL;
rc = 1; /* status stored */
} else {
spin_lock_bh(&li->lock);
/* cpu must be in stopped state */
- if (atomic_read(li->cpuflags) & CPUSTAT_RUNNING) {
+ if (!(atomic_read(li->cpuflags) & CPUSTAT_STOPPED)) {
rc = 1; /* incorrect state */
*reg &= SIGP_STAT_INCORRECT_STATE;
kfree(inti);
return rc;
}
+static int __sigp_sense_running(struct kvm_vcpu *vcpu, u16 cpu_addr,
+ unsigned long *reg)
+{
+ int rc;
+ struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
+
+ if (cpu_addr >= KVM_MAX_VCPUS)
+ return 3; /* not operational */
+
+ spin_lock(&fi->lock);
+ if (fi->local_int[cpu_addr] == NULL)
+ rc = 3; /* not operational */
+ else {
+ if (atomic_read(fi->local_int[cpu_addr]->cpuflags)
+ & CPUSTAT_RUNNING) {
+ /* running */
+ rc = 1;
+ } else {
+ /* not running */
+ *reg &= 0xffffffff00000000UL;
+ *reg |= SIGP_STAT_NOT_RUNNING;
+ rc = 0;
+ }
+ }
+ spin_unlock(&fi->lock);
+
+ VCPU_EVENT(vcpu, 4, "sensed running status of cpu %x rc %x", cpu_addr,
+ rc);
+
+ return rc;
+}
+
int kvm_s390_handle_sigp(struct kvm_vcpu *vcpu)
{
int r1 = (vcpu->arch.sie_block->ipa & 0x00f0) >> 4;
rc = __sigp_set_prefix(vcpu, cpu_addr, parameter,
&vcpu->arch.guest_gprs[r1]);
break;
+ case SIGP_SENSE_RUNNING:
+ vcpu->stat.instruction_sigp_sense_running++;
+ rc = __sigp_sense_running(vcpu, cpu_addr,
+ &vcpu->arch.guest_gprs[r1]);
+ break;
case SIGP_RESTART:
vcpu->stat.instruction_sigp_restart++;
/* user space must know about restart */
} else {
/* Completion interrupt was faster than initial
* interrupt. Set pfault_wait to -1 so the initial
- * interrupt doesn't put the task to sleep. */
- tsk->thread.pfault_wait = -1;
+ * interrupt doesn't put the task to sleep.
+ * If the task is not running, ignore the completion
+ * interrupt since it must be a leftover of a PFAULT
+ * CANCEL operation which didn't remove all pending
+ * completion interrupts. */
+ if (tsk->state == TASK_RUNNING)
+ tsk->thread.pfault_wait = -1;
}
put_task_struct(tsk);
} else {
#include <linux/pfn.h>
#include <linux/poison.h>
#include <linux/initrd.h>
+#include <linux/export.h>
#include <linux/gfp.h>
#include <asm/processor.h>
#include <asm/system.h>
config GENERIC_CLOCKEVENTS
def_bool y
-config SCHED_NO_NO_OMIT_FRAME_POINTER
- def_bool y
-
-config GENERIC_SYSCALL_TABLE
- def_bool y
-
-config SCORE_L1_CACHE_SHIFT
- int
- default "4"
-
menu "Kernel type"
config 32BIT
source "init/Kconfig"
-config PROBE_INITRD_HEADER
- bool "Probe initrd header created by addinitrd"
- depends on BLK_DEV_INITRD
- help
- Probe initrd header at the last page of kernel image.
- Say Y here if you are using arch/score/boot/addinitrd.c to
- add initrd or initramfs image to the kernel image.
- Otherwise, say N.
-
config MMU
def_bool y
*/
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/stat.h>
#include <linux/sysdev.h>
#include <linux/platform_device.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/mutex.h>
#include <linux/spinlock.h>
+#include <linux/export.h>
unsigned long PCIBIOS_MIN_IO = 0x0000;
unsigned long PCIBIOS_MIN_MEM = 0;
#endif /* !__ASSEMBLY__ */
#ifdef CONFIG_UNCACHED_MAPPING
+#if defined(CONFIG_29BIT)
+#define UNCAC_ADDR(addr) P2SEGADDR(addr)
+#define CAC_ADDR(addr) P1SEGADDR(addr)
+#else
#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + uncached_start)
#define CAC_ADDR(addr) ((addr) - uncached_start + PAGE_OFFSET)
+#endif
#else
#define UNCAC_ADDR(addr) ((addr))
#define CAC_ADDR(addr) ((addr))
#define __NR_syncfs 362
#define __NR_sendmmsg 363
#define __NR_setns 364
+#define __NR_process_vm_readv 365
+#define __NR_process_vm_writev 366
-#define NR_syscalls 365
+#define NR_syscalls 367
#ifdef __KERNEL__
#define __NR_syncfs 373
#define __NR_sendmmsg 374
#define __NR_setns 375
+#define __NR_process_vm_readv 376
+#define __NR_process_vm_writev 377
#ifdef __KERNEL__
-#define NR_syscalls 376
+#define NR_syscalls 378
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
static struct plat_sci_port scif0_platform_data = {
.mapbase = 0xfffe8000,
.flags = UPF_BOOT_AUTOCONF,
- .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE,
+ .scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
+ SCSCR_REIE,
.scbrr_algo_id = SCBRR_ALGO_2,
.type = PORT_SCIF,
.irqs = { 192, 192, 192, 192 },
+ .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
};
static struct platform_device scif0_device = {
static struct plat_sci_port scif1_platform_data = {
.mapbase = 0xfffe8800,
.flags = UPF_BOOT_AUTOCONF,
- .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE,
+ .scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
+ SCSCR_REIE,
.scbrr_algo_id = SCBRR_ALGO_2,
.type = PORT_SCIF,
.irqs = { 196, 196, 196, 196 },
+ .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
};
static struct platform_device scif1_device = {
static struct plat_sci_port scif2_platform_data = {
.mapbase = 0xfffe9000,
.flags = UPF_BOOT_AUTOCONF,
- .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE,
+ .scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
+ SCSCR_REIE,
.scbrr_algo_id = SCBRR_ALGO_2,
.type = PORT_SCIF,
.irqs = { 200, 200, 200, 200 },
+ .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
};
static struct platform_device scif2_device = {
static struct plat_sci_port scif3_platform_data = {
.mapbase = 0xfffe9800,
.flags = UPF_BOOT_AUTOCONF,
- .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE,
+ .scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
+ SCSCR_REIE,
.scbrr_algo_id = SCBRR_ALGO_2,
.type = PORT_SCIF,
.irqs = { 204, 204, 204, 204 },
+ .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
};
static struct platform_device scif3_device = {
#include <linux/io.h>
#include <linux/suspend.h>
#include <linux/cpuidle.h>
+#include <linux/export.h>
#include <asm/suspend.h>
#include <asm/uaccess.h>
#include <asm/hwblk.h>
};
static int cpuidle_sleep_enter(struct cpuidle_device *dev,
- struct cpuidle_state *state)
+ struct cpuidle_driver *drv,
+ int index)
{
unsigned long allowed_mode = arch_hwblk_sleep_mode();
ktime_t before, after;
- int requested_state = state - &dev->states[0];
+ int requested_state = index;
int allowed_state;
int k;
*/
k = min_t(int, allowed_state, requested_state);
- dev->last_state = &dev->states[k];
before = ktime_get();
sh_mobile_call_standby(cpuidle_mode[k]);
after = ktime_get();
- return ktime_to_ns(ktime_sub(after, before)) >> 10;
+
+ dev->last_residency = (int)ktime_to_ns(ktime_sub(after, before)) >> 10;
+
+ return k;
}
static struct cpuidle_device cpuidle_dev;
void sh_mobile_setup_cpuidle(void)
{
struct cpuidle_device *dev = &cpuidle_dev;
+ struct cpuidle_driver *drv = &cpuidle_driver;
struct cpuidle_state *state;
int i;
- cpuidle_register_driver(&cpuidle_driver);
for (i = 0; i < CPUIDLE_STATE_MAX; i++) {
- dev->states[i].name[0] = '\0';
- dev->states[i].desc[0] = '\0';
+ drv->states[i].name[0] = '\0';
+ drv->states[i].desc[0] = '\0';
}
i = CPUIDLE_DRIVER_STATE_START;
- state = &dev->states[i++];
+ state = &drv->states[i++];
snprintf(state->name, CPUIDLE_NAME_LEN, "C1");
strncpy(state->desc, "SuperH Sleep Mode", CPUIDLE_DESC_LEN);
state->exit_latency = 1;
state->flags |= CPUIDLE_FLAG_TIME_VALID;
state->enter = cpuidle_sleep_enter;
- dev->safe_state = state;
+ drv->safe_state_index = i-1;
if (sh_mobile_sleep_supported & SUSP_SH_SF) {
- state = &dev->states[i++];
+ state = &drv->states[i++];
snprintf(state->name, CPUIDLE_NAME_LEN, "C2");
strncpy(state->desc, "SuperH Sleep Mode [SF]",
CPUIDLE_DESC_LEN);
}
if (sh_mobile_sleep_supported & SUSP_SH_STANDBY) {
- state = &dev->states[i++];
+ state = &drv->states[i++];
snprintf(state->name, CPUIDLE_NAME_LEN, "C3");
strncpy(state->desc, "SuperH Mobile Standby Mode [SF]",
CPUIDLE_DESC_LEN);
state->enter = cpuidle_sleep_enter;
}
+ drv->state_count = i;
dev->state_count = i;
+ cpuidle_register_driver(&cpuidle_driver);
+
cpuidle_register_device(dev);
}
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/perf_event.h>
+#include <linux/export.h>
#include <asm/processor.h>
struct cpu_hw_events {
.long sys_syncfs
.long sys_sendmmsg
.long sys_setns
+ .long sys_process_vm_readv /* 365 */
+ .long sys_process_vm_writev
.long sys_syncfs
.long sys_sendmmsg
.long sys_setns /* 375 */
+ .long sys_process_vm_readv
+ .long sys_process_vm_writev
#include <linux/topology.h>
#include <linux/node.h>
#include <linux/nodemask.h>
+#include <linux/export.h>
static DEFINE_PER_CPU(struct cpu, cpu_devices);
#include <linux/io.h>
#include <linux/memblock.h>
#include <linux/dma-mapping.h>
+#include <linux/export.h>
#include <asm/mmu_context.h>
#include <asm/mmzone.h>
#include <asm/kexec.h>
Only choose N if you know in advance that you will not need to modify
OpenPROM settings on the running system.
-# Makefile helpers
-config SPARC32_PCI
- bool
- default y
- depends on SPARC32 && PCI
-
+# Makefile helper
config SPARC64_PCI
bool
default y
#define kern_addr_valid(addr) \
(test_bit(__pa((unsigned long)(addr))>>20, sparc_valid_addr_bitmap))
-extern int io_remap_pfn_range(struct vm_area_struct *vma,
- unsigned long from, unsigned long pfn,
- unsigned long size, pgprot_t prot);
-
/*
* For sparc32&64, the pfn in io_remap_pfn_range() carries <iospace> in
* its high 4 bits. These macros/functions put it there or get it from there.
#define GET_IOSPACE(pfn) (pfn >> (BITS_PER_LONG - 4))
#define GET_PFN(pfn) (pfn & 0x0fffffffUL)
+extern int remap_pfn_range(struct vm_area_struct *, unsigned long, unsigned long,
+ unsigned long, pgprot_t);
+
+static inline int io_remap_pfn_range(struct vm_area_struct *vma,
+ unsigned long from, unsigned long pfn,
+ unsigned long size, pgprot_t prot)
+{
+ unsigned long long offset, space, phys_base;
+
+ offset = ((unsigned long long) GET_PFN(pfn)) << PAGE_SHIFT;
+ space = GET_IOSPACE(pfn);
+ phys_base = offset | (space << 32ULL);
+
+ return remap_pfn_range(vma, from, phys_base >> PAGE_SHIFT, size, prot);
+}
+
#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
({ \
extern int page_in_phys_avail(unsigned long paddr);
-extern int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
- unsigned long pfn,
- unsigned long size, pgprot_t prot);
-
/*
* For sparc32&64, the pfn in io_remap_pfn_range() carries <iospace> in
* its high 4 bits. These macros/functions put it there or get it from there.
#define GET_IOSPACE(pfn) (pfn >> (BITS_PER_LONG - 4))
#define GET_PFN(pfn) (pfn & 0x0fffffffffffffffUL)
+extern int remap_pfn_range(struct vm_area_struct *, unsigned long, unsigned long,
+ unsigned long, pgprot_t);
+
+static inline int io_remap_pfn_range(struct vm_area_struct *vma,
+ unsigned long from, unsigned long pfn,
+ unsigned long size, pgprot_t prot)
+{
+ unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT;
+ int space = GET_IOSPACE(pfn);
+ unsigned long phys_base;
+
+ phys_base = offset | (((unsigned long) space) << 32UL);
+
+ return remap_pfn_range(vma, from, phys_base >> PAGE_SHIFT, size, prot);
+}
+
#include <asm-generic/pgtable.h>
/* We provide our own get_unmapped_area to cope with VA holes and
};
#ifdef __KERNEL__
-#include <linux/module.h>
/*
* c_cc characters in the termio structure. Oh, how I love being
#define __NR_syncfs 335
#define __NR_sendmmsg 336
#define __NR_setns 337
+#define __NR_process_vm_readv 338
+#define __NR_process_vm_writev 339
-#define NR_syscalls 338
+#define NR_syscalls 340
#ifdef __32bit_syscall_numbers__
/* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,
#include <linux/pm.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/module.h>
#include <asm/io.h>
#include <asm/oplib.h>
#include <linux/spinlock.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/export.h>
#include <asm/oplib.h>
#include <asm/io.h>
#include <asm/auxio.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/init.h>
-#include <linux/module.h>
#include <linux/console.h>
#include <asm/btext.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/of_device.h>
#include <linux/seq_file.h>
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/threads.h>
* Copyright (C) 2009 Hong H. Pham <hong.pham@windriver.com>
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <linux/dma-debug.h>
* Copyright (C) 1999 David S. Miller (davem@redhat.com)
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/init.h>
extern void fpload(unsigned long *fpregs, unsigned long *fsr);
#else /* CONFIG_SPARC32 */
+
+#include <asm/trap_block.h>
+
struct popc_3insn_patch_entry {
unsigned int addr;
unsigned int insns[3];
__popc_6insn_patch_end;
extern void __init per_cpu_patch(void);
+extern void sun4v_patch_1insn_range(struct sun4v_1insn_patch_entry *,
+ struct sun4v_1insn_patch_entry *);
+extern void sun4v_patch_2insn_range(struct sun4v_2insn_patch_entry *,
+ struct sun4v_2insn_patch_entry *);
extern void __init sun4v_patch(void);
extern void __init boot_cpu_id_too_large(int cpu);
extern unsigned int dcache_parity_tl1_occurred;
* Copyright (C) 2007 David S. Miller <davem@davemloft.net>
*/
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <asm/hypervisor.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <asm/oplib.h>
#include <asm/idprom.h>
*/
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/kernel_stat.h>
#include <linux/seq_file.h>
+#include <linux/export.h>
#include <asm/cacheflush.h>
#include <asm/cpudata.h>
* Copyright (C) 1998 Jakub Jelinek (jj@ultra.linux.cz)
*/
-#include <linux/module.h>
#include <linux/sched.h>
#include <linux/linkage.h>
#include <linux/ptrace.h>
put_online_cpus();
}
-void arch_jump_label_text_poke_early(jump_label_t addr)
-{
- u32 *insn_p = (u32 *) (unsigned long) addr;
-
- *insn_p = 0x01000000;
- flushi(insn_p);
-}
-
#endif
*/
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/delay.h>
*/
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/errno.h>
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/kernel.h>
#include <linux/pci.h>
+#include <linux/export.h>
#include <asm/leon.h>
#include <asm/leon_pci.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/delay.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <asm/io.h>
#include <asm/leon.h>
#include <asm/vaddrs.h>
#include <linux/mm.h>
#include <linux/miscdevice.h>
#include <linux/bootmem.h>
+#include <linux/export.h>
#include <asm/cpudata.h>
#include <asm/hypervisor.h>
#include <asm/mdesc.h>
#include <asm/prom.h>
+#include <asm/uaccess.h>
#include <asm/oplib.h>
#include <asm/smp.h>
#include <asm/processor.h>
#include <asm/spitfire.h>
+#include "entry.h"
+
#ifdef CONFIG_SPARC64
#include <linux/jump_label.h>
}
#ifdef CONFIG_SPARC64
+static void do_patch_sections(const Elf_Ehdr *hdr,
+ const Elf_Shdr *sechdrs)
+{
+ const Elf_Shdr *s, *sun4v_1insn = NULL, *sun4v_2insn = NULL;
+ char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
+
+ for (s = sechdrs; s < sechdrs + hdr->e_shnum; s++) {
+ if (!strcmp(".sun4v_1insn_patch", secstrings + s->sh_name))
+ sun4v_1insn = s;
+ if (!strcmp(".sun4v_2insn_patch", secstrings + s->sh_name))
+ sun4v_2insn = s;
+ }
+
+ if (sun4v_1insn && tlb_type == hypervisor) {
+ void *p = (void *) sun4v_1insn->sh_addr;
+ sun4v_patch_1insn_range(p, p + sun4v_1insn->sh_size);
+ }
+ if (sun4v_2insn && tlb_type == hypervisor) {
+ void *p = (void *) sun4v_2insn->sh_addr;
+ sun4v_patch_2insn_range(p, p + sun4v_2insn->sh_size);
+ }
+}
+
int module_finalize(const Elf_Ehdr *hdr,
const Elf_Shdr *sechdrs,
struct module *me)
/* make jump label nops */
jump_label_apply_nops(me);
+ do_patch_sections(hdr, sechdrs);
+
/* Cheetah's I-cache is fully coherent. */
if (tlb_type == spitfire) {
unsigned long va;
#include <linux/init.h>
#include <linux/percpu.h>
#include <linux/nmi.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/kprobes.h>
#include <linux/kernel_stat.h>
#include <linux/reboot.h>
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/init.h>
-#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/mod_devicetable.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/irq.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
+#include <asm/spitfire.h>
#include "of_device_common.h"
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/mod_devicetable.h>
#include <linux/errno.h>
#include <linux/irq.h>
* with minor modifications, see there for credits.
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/msi.h>
+#include <linux/export.h>
#include <linux/irq.h>
#include <linux/of_device.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/of_device.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/of_device.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <linux/interrupt.h>
#include <linux/of_device.h>
#include <linux/percpu.h>
#include <linux/irq.h>
#include <linux/msi.h>
+#include <linux/export.h>
#include <linux/log2.h>
#include <linux/of_device.h>
#include <linux/time.h>
#include <linux/timex.h>
#include <linux/interrupt.h>
+#include <linux/export.h>
#include <asm/irq.h>
#include <asm/oplib.h>
* Copyright (C) 2009 David S. Miller (davem@davemloft.net)
*/
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <asm/pil.h>
#include <asm/pcr.h>
#include <asm/nmi.h>
+#include <asm/spitfire.h>
/* This code is shared between various users of the performance
* counters. Users will be oprofile, pseudo-NMI watchdog, and the
#include <linux/pm.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/module.h>
#include <asm/io.h>
#include <asm/oplib.h>
*/
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/reboot.h>
#include <stdarg.h>
#include <linux/errno.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/bootmem.h>
-#include <linux/module.h>
#include <asm/prom.h>
#include <asm/oplib.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/module.h>
#include <linux/memblock.h>
#include <linux/of.h>
*/
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/errno.h>
#include <linux/mutex.h>
#include <linux/slab.h>
*/
#include <linux/kernel.h>
#include <linux/reboot.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/pm.h>
#include <asm/system.h>
#include <linux/mm.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/of.h>
#include <linux/root_dev.h>
#include <linux/cpu.h>
#include <linux/kdebug.h>
+#include <linux/export.h>
#include <asm/system.h>
#include <asm/io.h>
}
}
-void __init sun4v_patch(void)
+void sun4v_patch_1insn_range(struct sun4v_1insn_patch_entry *start,
+ struct sun4v_1insn_patch_entry *end)
{
- extern void sun4v_hvapi_init(void);
- struct sun4v_1insn_patch_entry *p1;
- struct sun4v_2insn_patch_entry *p2;
-
- if (tlb_type != hypervisor)
- return;
+ while (start < end) {
+ unsigned long addr = start->addr;
- p1 = &__sun4v_1insn_patch;
- while (p1 < &__sun4v_1insn_patch_end) {
- unsigned long addr = p1->addr;
-
- *(unsigned int *) (addr + 0) = p1->insn;
+ *(unsigned int *) (addr + 0) = start->insn;
wmb();
__asm__ __volatile__("flush %0" : : "r" (addr + 0));
- p1++;
+ start++;
}
+}
- p2 = &__sun4v_2insn_patch;
- while (p2 < &__sun4v_2insn_patch_end) {
- unsigned long addr = p2->addr;
+void sun4v_patch_2insn_range(struct sun4v_2insn_patch_entry *start,
+ struct sun4v_2insn_patch_entry *end)
+{
+ while (start < end) {
+ unsigned long addr = start->addr;
- *(unsigned int *) (addr + 0) = p2->insns[0];
+ *(unsigned int *) (addr + 0) = start->insns[0];
wmb();
__asm__ __volatile__("flush %0" : : "r" (addr + 0));
- *(unsigned int *) (addr + 4) = p2->insns[1];
+ *(unsigned int *) (addr + 4) = start->insns[1];
wmb();
__asm__ __volatile__("flush %0" : : "r" (addr + 4));
- p2++;
+ start++;
}
+}
+
+void __init sun4v_patch(void)
+{
+ extern void sun4v_hvapi_init(void);
+
+ if (tlb_type != hypervisor)
+ return;
+
+ sun4v_patch_1insn_range(&__sun4v_1insn_patch,
+ &__sun4v_1insn_patch_end);
+
+ sun4v_patch_2insn_range(&__sun4v_2insn_patch,
+ &__sun4v_2insn_patch_end);
sun4v_hvapi_init();
}
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*/
-void do_signal32(sigset_t *oldset, struct pt_regs * regs,
- int restart_syscall, unsigned long orig_i0)
+void do_signal32(sigset_t *oldset, struct pt_regs * regs)
{
struct k_sigaction ka;
+ unsigned long orig_i0;
+ int restart_syscall;
siginfo_t info;
int signr;
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
- /* If the debugger messes with the program counter, it clears
- * the "in syscall" bit, directing us to not perform a syscall
- * restart.
- */
- if (restart_syscall && !pt_regs_is_syscall(regs))
- restart_syscall = 0;
+ restart_syscall = 0;
+ orig_i0 = 0;
+ if (pt_regs_is_syscall(regs) &&
+ (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY))) {
+ restart_syscall = 1;
+ orig_i0 = regs->u_regs[UREG_G6];
+ }
if (signr > 0) {
if (restart_syscall)
siginfo_t info;
int signr;
+ /* It's a lot of work and synchronization to add a new ptrace
+ * register for GDB to save and restore in order to get
+ * orig_i0 correct for syscall restarts when debugging.
+ *
+ * Although it should be the case that most of the global
+ * registers are volatile across a system call, glibc already
+ * depends upon that fact that we preserve them. So we can't
+ * just use any global register to save away the orig_i0 value.
+ *
+ * In particular %g2, %g3, %g4, and %g5 are all assumed to be
+ * preserved across a system call trap by various pieces of
+ * code in glibc.
+ *
+ * %g7 is used as the "thread register". %g6 is not used in
+ * any fixed manner. %g6 is used as a scratch register and
+ * a compiler temporary, but it's value is never used across
+ * a system call. Therefore %g6 is usable for orig_i0 storage.
+ */
if (pt_regs_is_syscall(regs) && (regs->psr & PSR_C))
- restart_syscall = 1;
- else
- restart_syscall = 0;
+ regs->u_regs[UREG_G6] = orig_i0;
if (test_thread_flag(TIF_RESTORE_SIGMASK))
oldset = ¤t->saved_sigmask;
* the software "in syscall" bit, directing us to not perform
* a syscall restart.
*/
- if (restart_syscall && !pt_regs_is_syscall(regs))
- restart_syscall = 0;
+ restart_syscall = 0;
+ if (pt_regs_is_syscall(regs) && (regs->psr & PSR_C)) {
+ restart_syscall = 1;
+ orig_i0 = regs->u_regs[UREG_G6];
+ }
+
if (signr > 0) {
if (restart_syscall)
siginfo_t info;
int signr;
+ /* It's a lot of work and synchronization to add a new ptrace
+ * register for GDB to save and restore in order to get
+ * orig_i0 correct for syscall restarts when debugging.
+ *
+ * Although it should be the case that most of the global
+ * registers are volatile across a system call, glibc already
+ * depends upon that fact that we preserve them. So we can't
+ * just use any global register to save away the orig_i0 value.
+ *
+ * In particular %g2, %g3, %g4, and %g5 are all assumed to be
+ * preserved across a system call trap by various pieces of
+ * code in glibc.
+ *
+ * %g7 is used as the "thread register". %g6 is not used in
+ * any fixed manner. %g6 is used as a scratch register and
+ * a compiler temporary, but it's value is never used across
+ * a system call. Therefore %g6 is usable for orig_i0 storage.
+ */
if (pt_regs_is_syscall(regs) &&
- (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY))) {
- restart_syscall = 1;
- } else
- restart_syscall = 0;
+ (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY)))
+ regs->u_regs[UREG_G6] = orig_i0;
if (current_thread_info()->status & TS_RESTORE_SIGMASK)
oldset = ¤t->saved_sigmask;
#ifdef CONFIG_COMPAT
if (test_thread_flag(TIF_32BIT)) {
- extern void do_signal32(sigset_t *, struct pt_regs *,
- int restart_syscall,
- unsigned long orig_i0);
- do_signal32(oldset, regs, restart_syscall, orig_i0);
+ extern void do_signal32(sigset_t *, struct pt_regs *);
+ do_signal32(oldset, regs);
return;
}
#endif
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
- /* If the debugger messes with the program counter, it clears
- * the software "in syscall" bit, directing us to not perform
- * a syscall restart.
- */
- if (restart_syscall && !pt_regs_is_syscall(regs))
- restart_syscall = 0;
+ restart_syscall = 0;
+ if (pt_regs_is_syscall(regs) &&
+ (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY))) {
+ restart_syscall = 1;
+ orig_i0 = regs->u_regs[UREG_G6];
+ }
if (signr > 0) {
if (restart_syscall)
#include <linux/types.h>
#include <linux/thread_info.h>
#include <linux/uaccess.h>
+#include <linux/errno.h>
#include <asm/sigcontext.h>
#include <asm/fpumacro.h>
* Copyright (C) 1997, 2007, 2008 David S. Miller (davem@davemloft.net)
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/mm.h>
* Copyright (C) 1999 Jakub Jelinek (jj@ultra.linux.cz)
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/stacktrace.h>
#include <linux/thread_info.h>
#include <linux/ftrace.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <asm/ptrace.h>
#include <asm/stacktrace.h>
#include <linux/uio.h>
#include <linux/nfs_fs.h>
#include <linux/quota.h>
-#include <linux/module.h>
#include <linux/poll.h>
#include <linux/personality.h>
#include <linux/stat.h>
#include <linux/ipc.h>
#include <linux/personality.h>
#include <linux/random.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <asm/uaccess.h>
#include <asm/utrap.h>
/*320*/ .long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
/*325*/ .long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init
/*330*/ .long sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime
-/*335*/ .long sys_syncfs, sys_sendmmsg, sys_setns
+/*335*/ .long sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev
/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv
.word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_event_open, compat_sys_recvmmsg, sys_fanotify_init
/*330*/ .word sys32_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, compat_sys_open_by_handle_at, compat_sys_clock_adjtime
- .word sys_syncfs, compat_sys_sendmmsg, sys_setns
+ .word sys_syncfs, compat_sys_sendmmsg, sys_setns, compat_sys_process_vm_readv, compat_sys_process_vm_writev
#endif /* CONFIG_COMPAT */
/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
.word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init
/*330*/ .word sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime
- .word sys_syncfs, sys_sendmmsg, sys_setns
+ .word sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev
*/
#include <linux/errno.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/signal.h>
#include <linux/smp.h>
#include <linux/kdebug.h>
+#include <linux/export.h>
#include <asm/delay.h>
#include <asm/system.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/mm.h>
-#include <linux/module.h>
#include <asm/ptrace.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/irq.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <asm/mdesc.h>
*/
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/sched.h>
obj-y += fault_$(BITS).o
obj-y += init_$(BITS).o
obj-$(CONFIG_SPARC32) += loadmmu.o
-obj-y += generic_$(BITS).o
obj-$(CONFIG_SPARC32) += extable.o btfixup.o srmmu.o iommu.o io-unit.o
obj-$(CONFIG_SPARC32) += hypersparc.o viking.o tsunami.o swift.o
obj-$(CONFIG_SPARC_LEON)+= leon_mm.o
#include <linux/smp.h>
#include <linux/perf_event.h>
#include <linux/interrupt.h>
-#include <linux/module.h>
#include <linux/kdebug.h>
#include <asm/system.h>
+++ /dev/null
-/*
- * generic.c: Generic Sparc mm routines that are not dependent upon
- * MMU type but are Sparc specific.
- *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/pagemap.h>
-
-#include <asm/pgalloc.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-
-/* Remap IO memory, the same way as remap_pfn_range(), but use
- * the obio memory space.
- *
- * They use a pgprot that sets PAGE_IO and does not check the
- * mem_map table as this is independent of normal memory.
- */
-static inline void io_remap_pte_range(struct mm_struct *mm, pte_t * pte, unsigned long address, unsigned long size,
- unsigned long offset, pgprot_t prot, int space)
-{
- unsigned long end;
-
- address &= ~PMD_MASK;
- end = address + size;
- if (end > PMD_SIZE)
- end = PMD_SIZE;
- do {
- set_pte_at(mm, address, pte, mk_pte_io(offset, prot, space));
- address += PAGE_SIZE;
- offset += PAGE_SIZE;
- pte++;
- } while (address < end);
-}
-
-static inline int io_remap_pmd_range(struct mm_struct *mm, pmd_t * pmd, unsigned long address, unsigned long size,
- unsigned long offset, pgprot_t prot, int space)
-{
- unsigned long end;
-
- address &= ~PGDIR_MASK;
- end = address + size;
- if (end > PGDIR_SIZE)
- end = PGDIR_SIZE;
- offset -= address;
- do {
- pte_t *pte = pte_alloc_map(mm, NULL, pmd, address);
- if (!pte)
- return -ENOMEM;
- io_remap_pte_range(mm, pte, address, end - address, address + offset, prot, space);
- address = (address + PMD_SIZE) & PMD_MASK;
- pmd++;
- } while (address < end);
- return 0;
-}
-
-int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
- unsigned long pfn, unsigned long size, pgprot_t prot)
-{
- int error = 0;
- pgd_t * dir;
- unsigned long beg = from;
- unsigned long end = from + size;
- struct mm_struct *mm = vma->vm_mm;
- int space = GET_IOSPACE(pfn);
- unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT;
-
- /* See comment in mm/memory.c remap_pfn_range */
- vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP;
- vma->vm_pgoff = (offset >> PAGE_SHIFT) |
- ((unsigned long)space << 28UL);
-
- offset -= from;
- dir = pgd_offset(mm, from);
- flush_cache_range(vma, beg, end);
-
- while (from < end) {
- pmd_t *pmd = pmd_alloc(mm, dir, from);
- error = -ENOMEM;
- if (!pmd)
- break;
- error = io_remap_pmd_range(mm, pmd, from, end - from, offset + from, prot, space);
- if (error)
- break;
- from = (from + PGDIR_SIZE) & PGDIR_MASK;
- dir++;
- }
-
- flush_tlb_range(vma, beg, end);
- return error;
-}
-EXPORT_SYMBOL(io_remap_pfn_range);
+++ /dev/null
-/*
- * generic.c: Generic Sparc mm routines that are not dependent upon
- * MMU type but are Sparc specific.
- *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/pagemap.h>
-
-#include <asm/pgalloc.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/tlbflush.h>
-
-/* Remap IO memory, the same way as remap_pfn_range(), but use
- * the obio memory space.
- *
- * They use a pgprot that sets PAGE_IO and does not check the
- * mem_map table as this is independent of normal memory.
- */
-static inline void io_remap_pte_range(struct mm_struct *mm, pte_t * pte,
- unsigned long address,
- unsigned long size,
- unsigned long offset, pgprot_t prot,
- int space)
-{
- unsigned long end;
-
- /* clear hack bit that was used as a write_combine side-effect flag */
- offset &= ~0x1UL;
- address &= ~PMD_MASK;
- end = address + size;
- if (end > PMD_SIZE)
- end = PMD_SIZE;
- do {
- pte_t entry;
- unsigned long curend = address + PAGE_SIZE;
-
- entry = mk_pte_io(offset, prot, space, PAGE_SIZE);
- if (!(address & 0xffff)) {
- if (PAGE_SIZE < (4 * 1024 * 1024) &&
- !(address & 0x3fffff) &&
- !(offset & 0x3ffffe) &&
- end >= address + 0x400000) {
- entry = mk_pte_io(offset, prot, space,
- 4 * 1024 * 1024);
- curend = address + 0x400000;
- offset += 0x400000;
- } else if (PAGE_SIZE < (512 * 1024) &&
- !(address & 0x7ffff) &&
- !(offset & 0x7fffe) &&
- end >= address + 0x80000) {
- entry = mk_pte_io(offset, prot, space,
- 512 * 1024 * 1024);
- curend = address + 0x80000;
- offset += 0x80000;
- } else if (PAGE_SIZE < (64 * 1024) &&
- !(offset & 0xfffe) &&
- end >= address + 0x10000) {
- entry = mk_pte_io(offset, prot, space,
- 64 * 1024);
- curend = address + 0x10000;
- offset += 0x10000;
- } else
- offset += PAGE_SIZE;
- } else
- offset += PAGE_SIZE;
-
- if (pte_write(entry))
- entry = pte_mkdirty(entry);
- do {
- BUG_ON(!pte_none(*pte));
- set_pte_at(mm, address, pte, entry);
- address += PAGE_SIZE;
- pte_val(entry) += PAGE_SIZE;
- pte++;
- } while (address < curend);
- } while (address < end);
-}
-
-static inline int io_remap_pmd_range(struct mm_struct *mm, pmd_t * pmd, unsigned long address, unsigned long size,
- unsigned long offset, pgprot_t prot, int space)
-{
- unsigned long end;
-
- address &= ~PGDIR_MASK;
- end = address + size;
- if (end > PGDIR_SIZE)
- end = PGDIR_SIZE;
- offset -= address;
- do {
- pte_t *pte = pte_alloc_map(mm, NULL, pmd, address);
- if (!pte)
- return -ENOMEM;
- io_remap_pte_range(mm, pte, address, end - address, address + offset, prot, space);
- pte_unmap(pte);
- address = (address + PMD_SIZE) & PMD_MASK;
- pmd++;
- } while (address < end);
- return 0;
-}
-
-static inline int io_remap_pud_range(struct mm_struct *mm, pud_t * pud, unsigned long address, unsigned long size,
- unsigned long offset, pgprot_t prot, int space)
-{
- unsigned long end;
-
- address &= ~PUD_MASK;
- end = address + size;
- if (end > PUD_SIZE)
- end = PUD_SIZE;
- offset -= address;
- do {
- pmd_t *pmd = pmd_alloc(mm, pud, address);
- if (!pud)
- return -ENOMEM;
- io_remap_pmd_range(mm, pmd, address, end - address, address + offset, prot, space);
- address = (address + PUD_SIZE) & PUD_MASK;
- pud++;
- } while (address < end);
- return 0;
-}
-
-int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
- unsigned long pfn, unsigned long size, pgprot_t prot)
-{
- int error = 0;
- pgd_t * dir;
- unsigned long beg = from;
- unsigned long end = from + size;
- struct mm_struct *mm = vma->vm_mm;
- int space = GET_IOSPACE(pfn);
- unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT;
- unsigned long phys_base;
-
- phys_base = offset | (((unsigned long) space) << 32UL);
-
- /* See comment in mm/memory.c remap_pfn_range */
- vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP;
- vma->vm_pgoff = phys_base >> PAGE_SHIFT;
-
- offset -= from;
- dir = pgd_offset(mm, from);
- flush_cache_range(vma, beg, end);
-
- while (from < end) {
- pud_t *pud = pud_alloc(mm, dir, from);
- error = -ENOMEM;
- if (!pud)
- break;
- error = io_remap_pud_range(mm, pud, from, end - from, offset + from, prot, space);
- if (error)
- break;
- from = (from + PGDIR_SIZE) & PGDIR_MASK;
- dir++;
- }
-
- flush_tlb_range(vma, beg, end);
- return error;
-}
-EXPORT_SYMBOL(io_remap_pfn_range);
*/
#include <linux/mm.h>
#include <linux/highmem.h>
+#include <linux/export.h>
#include <asm/pgalloc.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
*/
#include <linux/init.h>
-#include <linux/module.h>
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/hugetlb.h>
config I2C_BATTERY_BQ27200
tristate "I2C Battery BQ27200 Support"
- select PUV3_I2C
+ select I2C_PUV3
select POWER_SUPPLY
select BATTERY_BQ27x00
config I2C_EEPROM_AT24
tristate "I2C EEPROMs AT24 support"
- select PUV3_I2C
+ select I2C_PUV3
select MISC_DEVICES
select EEPROM_AT24
Say Y here if you want the debug print routines to direct their
output to the UniCore On-Chip-Debugger channel using CP #1.
-config DEBUG_OCD_BREAKPOINT
- bool "Breakpoint support via On-Chip-Debugger"
- depends on DEBUG_OCD
-
-config DEBUG_UART
- int "Kernel low-level debugging messages via serial port"
- depends on DEBUG_LL
- range 0 1
- default "0"
- help
- Choice for UART for kernel low-level using PKUnity UARTS,
- should be between zero and one. The port must have been
- initialised by the boot-loader before use.
-
endmenu
# Copyright (C) 2001~2010 GUAN Xue-tao
#
-EXTRA_CFLAGS := -fpic -fno-builtin
-EXTRA_AFLAGS := -Wa,-march=all
+ccflags-y := -fpic -fno-builtin
+asflags-y := -Wa,-march=all
OBJS := misc.o
#ifndef __UNICORE_BITOPS_H__
#define __UNICORE_BITOPS_H__
-#define find_next_bit __uc32_find_next_bit
-#define find_next_zero_bit __uc32_find_next_zero_bit
-
-#define find_first_bit __uc32_find_first_bit
-#define find_first_zero_bit __uc32_find_first_zero_bit
-
#define _ASM_GENERIC_BITOPS_FLS_H_
#define _ASM_GENERIC_BITOPS___FLS_H_
#define _ASM_GENERIC_BITOPS_FFS_H_
#include <asm-generic/bitops.h>
+/* following definitions: to avoid using codes in lib/find_*.c */
+#define find_next_bit find_next_bit
+#define find_next_zero_bit find_next_zero_bit
+#define find_first_bit find_first_bit
+#define find_first_zero_bit find_first_zero_bit
+
#endif /* __UNICORE_BITOPS_H__ */
#define start_thread(regs, pc, sp) \
({ \
unsigned long *stack = (unsigned long *)sp; \
- set_fs(USER_DS); \
memset(regs->uregs, 0, sizeof(regs->uregs)); \
regs->UCreg_asr = USER_MODE; \
regs->UCreg_pc = pc & ~1; /* pc */ \
#include "ksyms.h"
-EXPORT_SYMBOL(__uc32_find_next_zero_bit);
-EXPORT_SYMBOL(__uc32_find_next_bit);
+EXPORT_SYMBOL(find_next_zero_bit);
+EXPORT_SYMBOL(find_next_bit);
EXPORT_SYMBOL(__backtrace);
* Purpose : Find a 'zero' bit
* Prototype: int find_first_zero_bit(void *addr, unsigned int maxbit);
*/
-__uc32_find_first_zero_bit:
+ENTRY(find_first_zero_bit)
cxor.a r1, #0
beq 3f
mov r2, #0
bub 1b
3: mov r0, r1 @ no free bits
mov pc, lr
+ENDPROC(find_first_zero_bit)
/*
* Purpose : Find next 'zero' bit
* Prototype: int find_next_zero_bit
* (void *addr, unsigned int maxbit, int offset)
*/
-ENTRY(__uc32_find_next_zero_bit)
+ENTRY(find_next_zero_bit)
cxor.a r1, #0
beq 3b
and.a ip, r2, #7
or r2, r2, #7 @ if zero, then no bits here
add r2, r2, #1 @ align bit pointer
b 2b @ loop for next bit
-ENDPROC(__uc32_find_next_zero_bit)
+ENDPROC(find_next_zero_bit)
/*
* Purpose : Find a 'one' bit
* Prototype: int find_first_bit
* (const unsigned long *addr, unsigned int maxbit);
*/
-__uc32_find_first_bit:
+ENTRY(find_first_bit)
cxor.a r1, #0
beq 3f
mov r2, #0
bub 1b
3: mov r0, r1 @ no free bits
mov pc, lr
+ENDPROC(find_first_bit)
/*
* Purpose : Find next 'one' bit
* Prototype: int find_next_zero_bit
* (void *addr, unsigned int maxbit, int offset)
*/
-ENTRY(__uc32_find_next_bit)
+ENTRY(find_next_bit)
cxor.a r1, #0
beq 3b
and.a ip, r2, #7
or r2, r2, #7 @ if zero, then no bits here
add r2, r2, #1 @ align bit pointer
b 2b @ loop for next bit
-ENDPROC(__uc32_find_next_bit)
+ENDPROC(find_next_bit)
/*
* One or more bits in the LSB of r3 are assumed to be set.
#include <linux/memblock.h>
#include <linux/sort.h>
#include <linux/dma-mapping.h>
+#include <linux/export.h>
#include <asm/sections.h>
#include <asm/setup.h>
config NEED_PER_CPU_PAGE_FIRST_CHUNK
def_bool y
-config HAVE_CPUMASK_OF_CPU_MAP
- def_bool X86_64_SMP
-
config ARCH_HIBERNATION_POSSIBLE
def_bool y
*
*/
+#include <linux/module.h>
#include <crypto/aes.h>
#include <asm/aes.h>
#include <linux/hardirq.h>
#include <linux/types.h>
#include <linux/crypto.h>
+#include <linux/module.h>
#include <linux/err.h>
#include <crypto/algapi.h>
#include <crypto/aes.h>
extern int local_apic_timer_c2_ok;
extern int disable_apic;
+extern unsigned int lapic_timer_frequency;
#ifdef CONFIG_SMP
extern void __inquire_remote_apic(int apicid);
#define NMI_REASON_CLEAR_IOCHK 0x08
#define NMI_REASON_CLEAR_MASK 0x0f
-static inline unsigned char get_nmi_reason(void)
+static inline unsigned char default_get_nmi_reason(void)
{
return inb(NMI_REASON_PORT);
}
void mce_notify_process(void);
DECLARE_PER_CPU(struct mce, injectm);
-extern struct file_operations mce_chrdev_ops;
+
+extern void register_mce_write_callback(ssize_t (*)(struct file *filp,
+ const char __user *ubuf,
+ size_t usize, loff_t *off));
/*
* Exception handler
extern enum mrst_timer_options mrst_timer_options;
+/*
+ * Penwell uses spread spectrum clock, so the freq number is not exactly
+ * the same as reported by MSR based on SDM.
+ */
+#define PENWELL_FSB_FREQ_83SKU 83200
+#define PENWELL_FSB_FREQ_100SKU 99840
+
#define SFI_MTMR_MAX_NUM 8
#define SFI_MRTC_MAX 8
/**
* struct x86_platform_ops - platform specific runtime functions
* @calibrate_tsc: calibrate TSC
+ * @wallclock_init: init the wallclock device
* @get_wallclock: get time from HW clock like RTC etc.
* @set_wallclock: set time back to HW clock
* @is_untracked_pat_range exclude from PAT logic
*/
struct x86_platform_ops {
unsigned long (*calibrate_tsc)(void);
+ void (*wallclock_init)(void);
unsigned long (*get_wallclock)(void);
int (*set_wallclock)(unsigned long nowtime);
void (*iommu_shutdown)(void);
bool (*is_untracked_pat_range)(u64 start, u64 end);
void (*nmi_init)(void);
+ unsigned char (*get_nmi_reason)(void);
int (*i8042_detect)(void);
};
+++ /dev/null
-#ifndef _ASM_X86_XEN_GRANT_TABLE_H
-#define _ASM_X86_XEN_GRANT_TABLE_H
-
-#define xen_alloc_vm_area(size) alloc_vm_area(size)
-#define xen_free_vm_area(area) free_vm_area(area)
-
-#endif /* _ASM_X86_XEN_GRANT_TABLE_H */
#include <xen/interface/xen.h>
#include <xen/interface/sched.h>
#include <xen/interface/physdev.h>
+#include <xen/interface/platform.h>
/*
* The hypercall asms have to meet several constraints:
return _hypercall2(long, set_timer_op, timeout_lo, timeout_hi);
}
+static inline int
+HYPERVISOR_dom0_op(struct xen_platform_op *platform_op)
+{
+ platform_op->interface_version = XENPF_INTERFACE_VERSION;
+ return _hypercall1(int, dom0_op, platform_op);
+}
+
static inline int
HYPERVISOR_set_debugreg(int reg, unsigned long value)
{
DEFINE_GUEST_HANDLE(int);
DEFINE_GUEST_HANDLE(long);
DEFINE_GUEST_HANDLE(void);
+DEFINE_GUEST_HANDLE(uint64_t);
#endif
#ifndef HYPERVISOR_VIRT_START
atomic_set(&stop_machine_first, 1);
wrote_text = 0;
- __stop_machine(stop_machine_text_poke, (void *)&tpp, NULL);
+ __stop_machine(stop_machine_text_poke, (void *)&tpp, cpu_online_mask);
}
.flags = IORESOURCE_MEM | IORESOURCE_BUSY,
};
-static unsigned int calibration_result;
+unsigned int lapic_timer_frequency = 0;
static void apic_pm_activate(void);
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
case CLOCK_EVT_MODE_ONESHOT:
- __setup_APIC_LVTT(calibration_result,
+ __setup_APIC_LVTT(lapic_timer_frequency,
mode != CLOCK_EVT_MODE_PERIODIC, 1);
break;
case CLOCK_EVT_MODE_UNUSED:
long delta, deltatsc;
int pm_referenced = 0;
+ /**
+ * check if lapic timer has already been calibrated by platform
+ * specific routine, such as tsc calibration code. if so, we just fill
+ * in the clockevent structure and return.
+ */
+
+ if (lapic_timer_frequency) {
+ apic_printk(APIC_VERBOSE, "lapic timer already calibrated %d\n",
+ lapic_timer_frequency);
+ lapic_clockevent.mult = div_sc(lapic_timer_frequency/APIC_DIVISOR,
+ TICK_NSEC, lapic_clockevent.shift);
+ lapic_clockevent.max_delta_ns =
+ clockevent_delta2ns(0x7FFFFF, &lapic_clockevent);
+ lapic_clockevent.min_delta_ns =
+ clockevent_delta2ns(0xF, &lapic_clockevent);
+ lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
+ return 0;
+ }
+
local_irq_disable();
/* Replace the global interrupt handler */
lapic_clockevent.min_delta_ns =
clockevent_delta2ns(0xF, &lapic_clockevent);
- calibration_result = (delta * APIC_DIVISOR) / LAPIC_CAL_LOOPS;
+ lapic_timer_frequency = (delta * APIC_DIVISOR) / LAPIC_CAL_LOOPS;
apic_printk(APIC_VERBOSE, "..... delta %ld\n", delta);
apic_printk(APIC_VERBOSE, "..... mult: %u\n", lapic_clockevent.mult);
apic_printk(APIC_VERBOSE, "..... calibration result: %u\n",
- calibration_result);
+ lapic_timer_frequency);
if (cpu_has_tsc) {
apic_printk(APIC_VERBOSE, "..... CPU clock speed is "
apic_printk(APIC_VERBOSE, "..... host bus clock speed is "
"%u.%04u MHz.\n",
- calibration_result / (1000000 / HZ),
- calibration_result % (1000000 / HZ));
+ lapic_timer_frequency / (1000000 / HZ),
+ lapic_timer_frequency % (1000000 / HZ));
/*
* Do a sanity check on the APIC calibration result
*/
- if (calibration_result < (1000000 / HZ)) {
+ if (lapic_timer_frequency < (1000000 / HZ)) {
local_irq_enable();
pr_warning("APIC frequency too slow, disabling apic timer\n");
return -1;
struct irq_cfg *cfg;
int count, node, i;
- if (!legacy_pic->nr_legacy_irqs) {
- nr_irqs_gsi = 0;
+ if (!legacy_pic->nr_legacy_irqs)
io_apic_irqs = ~0UL;
- }
for (i = 0; i < nr_ioapics; i++) {
ioapics[i].saved_registers =
int ioapic_idx;
struct irq_cfg *cfg;
unsigned int irq;
+ struct irq_chip *chip;
printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
for (ioapic_idx = 0; ioapic_idx < nr_ioapics; ioapic_idx++)
for_each_active_irq(irq) {
struct irq_pin_list *entry;
+ chip = irq_get_chip(irq);
+ if (chip != &ioapic_chip)
+ continue;
+
cfg = irq_get_chip_data(irq);
if (!cfg)
continue;
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/elf.h>
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/acpi.h>
#include <linux/cper.h>
if (!alloc_cpumask_var(&mce_inject_cpumask, GFP_KERNEL))
return -ENOMEM;
printk(KERN_INFO "Machine check injector initialized\n");
- mce_chrdev_ops.write = mce_write;
+ register_mce_write_callback(mce_write);
register_nmi_handler(NMI_LOCAL, mce_raise_notify, 0,
"mce_notify");
return 0;
#include <linux/mm.h>
#include <linux/debugfs.h>
#include <linux/irq_work.h>
+#include <linux/export.h>
#include <asm/processor.h>
#include <asm/mce.h>
}
}
-/* Modified in mce-inject.c, so not static or const */
-struct file_operations mce_chrdev_ops = {
+static ssize_t (*mce_write)(struct file *filp, const char __user *ubuf,
+ size_t usize, loff_t *off);
+
+void register_mce_write_callback(ssize_t (*fn)(struct file *filp,
+ const char __user *ubuf,
+ size_t usize, loff_t *off))
+{
+ mce_write = fn;
+}
+EXPORT_SYMBOL_GPL(register_mce_write_callback);
+
+ssize_t mce_chrdev_write(struct file *filp, const char __user *ubuf,
+ size_t usize, loff_t *off)
+{
+ if (mce_write)
+ return mce_write(filp, ubuf, usize, off);
+ else
+ return -EINVAL;
+}
+
+static const struct file_operations mce_chrdev_ops = {
.open = mce_chrdev_open,
.release = mce_chrdev_release,
.read = mce_chrdev_read,
+ .write = mce_chrdev_write,
.poll = mce_chrdev_poll,
.unlocked_ioctl = mce_chrdev_ioctl,
.llseek = no_llseek,
};
-EXPORT_SYMBOL_GPL(mce_chrdev_ops);
static struct miscdevice mce_chrdev_device = {
MISC_MCELOG_MINOR,
#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/percpu.h>
+#include <linux/export.h>
#include <linux/sysdev.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <asm/hardirq.h>
#include <asm/apic.h>
* Architecture specific OF callbacks.
*/
#include <linux/bootmem.h>
+#include <linux/export.h>
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/crash_dump.h>
+#include <linux/export.h>
#include <linux/bootmem.h>
#include <linux/pfn.h>
#include <linux/suspend.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/interrupt.h>
+#include <linux/export.h>
#include <linux/sysdev.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/smp.h>
#include <linux/ftrace.h>
#include <linux/delay.h>
+#include <linux/export.h>
#include <asm/apic.h>
#include <asm/io_apic.h>
} __attribute__((packed));
};
-void arch_jump_label_transform(struct jump_entry *entry,
- enum jump_label_type type)
+static void __jump_label_transform(struct jump_entry *entry,
+ enum jump_label_type type,
+ void *(*poker)(void *, const void *, size_t))
{
union jump_code_union code;
(entry->code + JUMP_LABEL_NOP_SIZE);
} else
memcpy(&code, ideal_nops[NOP_ATOMIC5], JUMP_LABEL_NOP_SIZE);
+
+ (*poker)((void *)entry->code, &code, JUMP_LABEL_NOP_SIZE);
+}
+
+void arch_jump_label_transform(struct jump_entry *entry,
+ enum jump_label_type type)
+{
get_online_cpus();
mutex_lock(&text_mutex);
- text_poke_smp((void *)entry->code, &code, JUMP_LABEL_NOP_SIZE);
+ __jump_label_transform(entry, type, text_poke_smp);
mutex_unlock(&text_mutex);
put_online_cpus();
}
-void __init_or_module arch_jump_label_text_poke_early(jump_label_t addr)
+void arch_jump_label_transform_static(struct jump_entry *entry,
+ enum jump_label_type type)
{
- text_poke_early((void *)addr, ideal_nops[NOP_ATOMIC5],
- JUMP_LABEL_NOP_SIZE);
+ __jump_label_transform(entry, type, text_poke_early);
}
#endif
struct pvclock_vcpu_time_info *src;
cycle_t ret;
- src = &get_cpu_var(hv_clock);
+ preempt_disable_notrace();
+ src = &__get_cpu_var(hv_clock);
ret = pvclock_clocksource_read(src);
- put_cpu_var(hv_clock);
+ preempt_enable_notrace();
return ret;
}
#include <linux/delay.h>
#include <linux/hardirq.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <linux/mca.h>
#include <asm/traps.h>
#include <asm/mach_traps.h>
#include <asm/nmi.h>
+#include <asm/x86_init.h>
#define NMI_MAX_NAMELEN 16
struct nmiaction {
/* Non-CPU-specific NMI: NMI sources can be processed on any CPU */
raw_spin_lock(&nmi_reason_lock);
- reason = get_nmi_reason();
+ reason = x86_platform.get_nmi_reason();
if (reason & NMI_REASON_MASK) {
if (reason & NMI_REASON_SERR)
#include <linux/dma-mapping.h>
#include <linux/dma-debug.h>
#include <linux/dmar.h>
+#include <linux/export.h>
#include <linux/bootmem.h>
#include <linux/gfp.h>
#include <linux/pci.h>
#include <linux/dmi.h>
#include <linux/pfn.h>
#include <linux/pci.h>
-#include <asm/pci-direct.h>
-
+#include <linux/export.h>
+#include <asm/pci-direct.h>
#include <asm/e820.h>
#include <asm/mmzone.h>
#include <asm/setup.h>
#include <linux/mc146818rtc.h>
#include <linux/acpi.h>
#include <linux/bcd.h>
+#include <linux/export.h>
#include <linux/pnp.h>
#include <linux/of.h>
x86_init.timers.wallclock_init();
+ x86_platform.wallclock_init();
+
mcheck_init();
arch_init_ideal_nops();
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
+#include <linux/export.h>
#include <linux/kernel_stat.h>
#include <linux/mc146818rtc.h>
#include <linux/cache.h>
#include <linux/dma_remapping.h>
#include <linux/init_task.h>
#include <linux/spinlock.h>
+#include <linux/export.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/i8253.h>
#include <linux/time.h>
+#include <linux/export.h>
#include <linux/mca.h>
#include <asm/vsyscall.h>
* Send feedback to <colpatch@us.ibm.com>
*/
#include <linux/nodemask.h>
+#include <linux/export.h>
#include <linux/mmzone.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/seqlock.h>
#include <linux/jiffies.h>
#include <linux/sysctl.h>
+#include <linux/topology.h>
#include <linux/clocksource.h>
#include <linux/getcpu.h>
#include <linux/cpu.h>
#include <asm/pat.h>
#include <asm/tsc.h>
#include <asm/iommu.h>
+#include <asm/mach_traps.h>
void __cpuinit x86_init_noop(void) { }
void __init x86_init_uint_noop(unsigned int unused) { }
void __init x86_init_pgd_noop(pgd_t *unused) { }
int __init iommu_init_noop(void) { return 0; }
void iommu_shutdown_noop(void) { }
+void wallclock_init_noop(void) { }
/*
* The platform setup functions are preset with the default functions
struct x86_platform_ops x86_platform = {
.calibrate_tsc = native_calibrate_tsc,
+ .wallclock_init = wallclock_init_noop,
.get_wallclock = mach_get_cmos_time,
.set_wallclock = mach_set_rtc_mmss,
.iommu_shutdown = iommu_shutdown_noop,
.is_untracked_pat_range = is_ISA_range,
.nmi_init = default_nmi_init,
+ .get_nmi_reason = default_get_nmi_reason,
.i8042_detect = default_i8042_detect
};
#include <asm/mce.h>
#include <asm/i387.h>
#include <asm/xcr.h>
+#include <asm/perf_event.h>
#include "trace.h"
static int ple_window = KVM_VMX_DEFAULT_PLE_WINDOW;
module_param(ple_window, int, S_IRUGO);
-#define NR_AUTOLOAD_MSRS 1
+#define NR_AUTOLOAD_MSRS 8
#define VMCS02_POOL_SIZE 1
struct vmcs {
static unsigned long *vmx_msr_bitmap_longmode;
static bool cpu_has_load_ia32_efer;
+static bool cpu_has_load_perf_global_ctrl;
static DECLARE_BITMAP(vmx_vpid_bitmap, VMX_NR_VPIDS);
static DEFINE_SPINLOCK(vmx_vpid_lock);
vmcs_write32(EXCEPTION_BITMAP, eb);
}
+static void clear_atomic_switch_msr_special(unsigned long entry,
+ unsigned long exit)
+{
+ vmcs_clear_bits(VM_ENTRY_CONTROLS, entry);
+ vmcs_clear_bits(VM_EXIT_CONTROLS, exit);
+}
+
static void clear_atomic_switch_msr(struct vcpu_vmx *vmx, unsigned msr)
{
unsigned i;
struct msr_autoload *m = &vmx->msr_autoload;
- if (msr == MSR_EFER && cpu_has_load_ia32_efer) {
- vmcs_clear_bits(VM_ENTRY_CONTROLS, VM_ENTRY_LOAD_IA32_EFER);
- vmcs_clear_bits(VM_EXIT_CONTROLS, VM_EXIT_LOAD_IA32_EFER);
- return;
+ switch (msr) {
+ case MSR_EFER:
+ if (cpu_has_load_ia32_efer) {
+ clear_atomic_switch_msr_special(VM_ENTRY_LOAD_IA32_EFER,
+ VM_EXIT_LOAD_IA32_EFER);
+ return;
+ }
+ break;
+ case MSR_CORE_PERF_GLOBAL_CTRL:
+ if (cpu_has_load_perf_global_ctrl) {
+ clear_atomic_switch_msr_special(
+ VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL,
+ VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL);
+ return;
+ }
+ break;
}
for (i = 0; i < m->nr; ++i)
vmcs_write32(VM_EXIT_MSR_LOAD_COUNT, m->nr);
}
+static void add_atomic_switch_msr_special(unsigned long entry,
+ unsigned long exit, unsigned long guest_val_vmcs,
+ unsigned long host_val_vmcs, u64 guest_val, u64 host_val)
+{
+ vmcs_write64(guest_val_vmcs, guest_val);
+ vmcs_write64(host_val_vmcs, host_val);
+ vmcs_set_bits(VM_ENTRY_CONTROLS, entry);
+ vmcs_set_bits(VM_EXIT_CONTROLS, exit);
+}
+
static void add_atomic_switch_msr(struct vcpu_vmx *vmx, unsigned msr,
u64 guest_val, u64 host_val)
{
unsigned i;
struct msr_autoload *m = &vmx->msr_autoload;
- if (msr == MSR_EFER && cpu_has_load_ia32_efer) {
- vmcs_write64(GUEST_IA32_EFER, guest_val);
- vmcs_write64(HOST_IA32_EFER, host_val);
- vmcs_set_bits(VM_ENTRY_CONTROLS, VM_ENTRY_LOAD_IA32_EFER);
- vmcs_set_bits(VM_EXIT_CONTROLS, VM_EXIT_LOAD_IA32_EFER);
- return;
+ switch (msr) {
+ case MSR_EFER:
+ if (cpu_has_load_ia32_efer) {
+ add_atomic_switch_msr_special(VM_ENTRY_LOAD_IA32_EFER,
+ VM_EXIT_LOAD_IA32_EFER,
+ GUEST_IA32_EFER,
+ HOST_IA32_EFER,
+ guest_val, host_val);
+ return;
+ }
+ break;
+ case MSR_CORE_PERF_GLOBAL_CTRL:
+ if (cpu_has_load_perf_global_ctrl) {
+ add_atomic_switch_msr_special(
+ VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL,
+ VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL,
+ GUEST_IA32_PERF_GLOBAL_CTRL,
+ HOST_IA32_PERF_GLOBAL_CTRL,
+ guest_val, host_val);
+ return;
+ }
+ break;
}
for (i = 0; i < m->nr; ++i)
if (m->guest[i].index == msr)
break;
- if (i == m->nr) {
+ if (i == NR_AUTOLOAD_MSRS) {
+ printk_once(KERN_WARNING"Not enough mst switch entries. "
+ "Can't add msr %x\n", msr);
+ return;
+ } else if (i == m->nr) {
++m->nr;
vmcs_write32(VM_ENTRY_MSR_LOAD_COUNT, m->nr);
vmcs_write32(VM_EXIT_MSR_LOAD_COUNT, m->nr);
&& allow_1_setting(MSR_IA32_VMX_EXIT_CTLS,
VM_EXIT_LOAD_IA32_EFER);
+ cpu_has_load_perf_global_ctrl =
+ allow_1_setting(MSR_IA32_VMX_ENTRY_CTLS,
+ VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL)
+ && allow_1_setting(MSR_IA32_VMX_EXIT_CTLS,
+ VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL);
+
+ /*
+ * Some cpus support VM_ENTRY_(LOAD|SAVE)_IA32_PERF_GLOBAL_CTRL
+ * but due to arrata below it can't be used. Workaround is to use
+ * msr load mechanism to switch IA32_PERF_GLOBAL_CTRL.
+ *
+ * VM Exit May Incorrectly Clear IA32_PERF_GLOBAL_CTRL [34:32]
+ *
+ * AAK155 (model 26)
+ * AAP115 (model 30)
+ * AAT100 (model 37)
+ * BC86,AAY89,BD102 (model 44)
+ * BA97 (model 46)
+ *
+ */
+ if (cpu_has_load_perf_global_ctrl && boot_cpu_data.x86 == 0x6) {
+ switch (boot_cpu_data.x86_model) {
+ case 26:
+ case 30:
+ case 37:
+ case 44:
+ case 46:
+ cpu_has_load_perf_global_ctrl = false;
+ printk_once(KERN_WARNING"kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL "
+ "does not work properly. Using workaround\n");
+ break;
+ default:
+ break;
+ }
+ }
+
return 0;
}
vmcs_write32(VM_ENTRY_INTR_INFO_FIELD, 0);
}
+static void atomic_switch_perf_msrs(struct vcpu_vmx *vmx)
+{
+ int i, nr_msrs;
+ struct perf_guest_switch_msr *msrs;
+
+ msrs = perf_guest_get_msrs(&nr_msrs);
+
+ if (!msrs)
+ return;
+
+ for (i = 0; i < nr_msrs; i++)
+ if (msrs[i].host == msrs[i].guest)
+ clear_atomic_switch_msr(vmx, msrs[i].msr);
+ else
+ add_atomic_switch_msr(vmx, msrs[i].msr, msrs[i].guest,
+ msrs[i].host);
+}
+
#ifdef CONFIG_X86_64
#define R "r"
#define Q "q"
if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
vmx_set_interrupt_shadow(vcpu, 0);
+ atomic_switch_perf_msrs(vmx);
+
vmx->__launched = vmx->loaded_vmcs->launched;
asm(
/* Store host registers */
#include <linux/lguest_launcher.h>
#include <linux/virtio_console.h>
#include <linux/pm.h>
+#include <linux/export.h>
#include <asm/apic.h>
#include <asm/lguest.h>
#include <asm/paravirt.h>
#include <linux/types.h>
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/ioport.h>
* legacy.c - traditional, old school PCI bus probing
*/
#include <linux/init.h>
+#include <linux/export.h>
#include <linux/pci.h>
#include <asm/pci_x86.h>
}
#else
-static inline void sdv_serial_fixup(void);
+static inline void sdv_serial_fixup(void) {};
#endif
static void __init sdv_arch_setup(void)
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/efi.h>
+#include <linux/export.h>
#include <linux/bootmem.h>
#include <linux/memblock.h>
#include <linux/spinlock.h>
#include <linux/efi.h>
#include <asm/io.h>
+#include <asm/desc.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
static unsigned long __init mrst_calibrate_tsc(void)
{
unsigned long flags, fast_calibrate;
-
- local_irq_save(flags);
- fast_calibrate = apbt_quick_calibrate();
- local_irq_restore(flags);
-
+ if (__mrst_cpu_chip == MRST_CPU_CHIP_PENWELL) {
+ u32 lo, hi, ratio, fsb;
+
+ rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+ pr_debug("IA32 perf status is 0x%x, 0x%0x\n", lo, hi);
+ ratio = (hi >> 8) & 0x1f;
+ pr_debug("ratio is %d\n", ratio);
+ if (!ratio) {
+ pr_err("read a zero ratio, should be incorrect!\n");
+ pr_err("force tsc ratio to 16 ...\n");
+ ratio = 16;
+ }
+ rdmsr(MSR_FSB_FREQ, lo, hi);
+ if ((lo & 0x7) == 0x7)
+ fsb = PENWELL_FSB_FREQ_83SKU;
+ else
+ fsb = PENWELL_FSB_FREQ_100SKU;
+ fast_calibrate = ratio * fsb;
+ pr_debug("read penwell tsc %lu khz\n", fast_calibrate);
+ lapic_timer_frequency = fsb * 1000 / HZ;
+ /* mark tsc clocksource as reliable */
+ set_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC_RELIABLE);
+ } else {
+ local_irq_save(flags);
+ fast_calibrate = apbt_quick_calibrate();
+ local_irq_restore(flags);
+ }
+
if (fast_calibrate)
return fast_calibrate;
intel_scu_ipc_simple_command(0xf1, 0);
}
+/*
+ * Moorestown does not have external NMI source nor port 0x61 to report
+ * NMI status. The possible NMI sources are from pmu as a result of NMI
+ * watchdog or lock debug. Reading io port 0x61 results in 0xff which
+ * misled NMI handler.
+ */
+static unsigned char mrst_get_nmi_reason(void)
+{
+ return 0;
+}
+
/*
* Moorestown specific x86_init function overrides and early setup
* calls.
x86_platform.calibrate_tsc = mrst_calibrate_tsc;
x86_platform.i8042_detect = mrst_i8042_detect;
x86_init.timers.wallclock_init = mrst_rtc_init;
+ x86_platform.get_nmi_reason = mrst_get_nmi_reason;
+
x86_init.pci.init = pci_mrst_init;
x86_init.pci.fixup_irqs = x86_init_noop;
}
static const struct devs_id __initconst device_ids[] = {
+ {"bma023", SFI_DEV_TYPE_I2C, 1, &no_platform_data},
{"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data},
{"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data},
{"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
/* 24 */ { 0x4110, 0 }, /* Lincroft */
};
-/* n.b. We ignore PCI-id 0x815 in LSS9 b/c MeeGo has no driver for it */
+/* n.b. We ignore PCI-id 0x815 in LSS9 b/c Linux has no driver for it */
static u16 mrst_lss9_pci_ids[] = {0x080a, 0x0814, 0};
static u16 mrst_lss10_pci_ids[] = {0x0800, 0x0801, 0x0802, 0x0803,
0x0804, 0x0805, 0x080f, 0};
*/
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/sfi.h>
#include <linux/platform_device.h>
spin_unlock_irqrestore(&rtc_lock, flags);
- /* vRTC YEAR reg contains the offset to 1960 */
- year += 1960;
+ /* vRTC YEAR reg contains the offset to 1972 */
+ year += 1972;
printk(KERN_INFO "vRTC: sec: %d min: %d hour: %d day: %d "
"mon: %d year: %d\n", sec, min, hour, mday, mon, year);
#include <linux/cs5535.h>
#include <linux/platform_device.h>
+#include <linux/export.h>
#include <linux/pm.h>
#include <linux/mfd/core.h>
#include <linux/suspend.h>
*/
#include <linux/efi.h>
+#include <linux/export.h>
#include <asm/efi.h>
#include <linux/io.h>
#include <asm/uv/bios.h>
*/
#include <linux/suspend.h>
+#include <linux/export.h>
#include <linux/smp.h>
#include <asm/pgtable.h>
config ARCH_REUSE_HOST_VSYSCALL_AREA
def_bool !64BIT
-config SMP_BROKEN
- def_bool 64BIT
-
config GENERIC_HWEIGHT
def_bool y
#endif
#define KSTK_EIP(tsk) KSTK_REG(tsk, HOST_IP)
-#define KSTK_ESP(tsk) KSTK_REG(tsk, HOST_IP)
+#define KSTK_ESP(tsk) KSTK_REG(tsk, HOST_SP)
#define KSTK_EBP(tsk) KSTK_REG(tsk, HOST_BP)
#define ARCH_IS_STACKGROW(address) \
*/
#include <linux/fb.h>
#include <linux/pci.h>
+#include <linux/module.h>
int fb_is_primary_device(struct fb_info *info)
{
int cpu = (long)hcpu;
switch (action) {
case CPU_UP_PREPARE:
- per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu];
+ xen_vcpu_setup(cpu);
if (xen_have_vector_callback)
xen_init_lock_cpu(cpu);
break;
xen_hvm_smp_init();
register_cpu_notifier(&xen_hvm_cpu_notifier);
xen_unplug_emulated_devices();
- have_vcpu_info_placement = 0;
x86_init.irqs.intr_init = xen_init_IRQ;
xen_hvm_init_time_ops();
xen_hvm_init_mmu_ops();
if (shared == NULL) {
struct vm_struct *area =
- xen_alloc_vm_area(PAGE_SIZE * max_nr_gframes);
+ alloc_vm_area(PAGE_SIZE * max_nr_gframes, NULL);
BUG_ON(area == NULL);
shared = area->addr;
*__shared = shared;
static int xen_set_wallclock(unsigned long now)
{
+ struct xen_platform_op op;
+ int rc;
+
/* do nothing for domU */
- return -1;
+ if (!xen_initial_domain())
+ return -1;
+
+ op.cmd = XENPF_settime;
+ op.u.settime.secs = now;
+ op.u.settime.nsecs = 0;
+ op.u.settime.system_time = xen_clocksource_read();
+
+ rc = HYPERVISOR_dom0_op(&op);
+ WARN(rc != 0, "XENPF_settime failed: now=%ld\n", now);
+
+ return rc;
}
static struct clocksource xen_clocksource __read_mostly = {
*/
if (list_empty(&plug->list))
trace_block_plug(q);
- else if (!plug->should_sort) {
- struct request *__rq;
+ else {
+ if (!plug->should_sort) {
+ struct request *__rq;
- __rq = list_entry_rq(plug->list.prev);
- if (__rq->q != q)
- plug->should_sort = 1;
+ __rq = list_entry_rq(plug->list.prev);
+ if (__rq->q != q)
+ plug->should_sort = 1;
+ }
+ if (request_count >= BLK_MAX_REQUEST_COUNT) {
+ blk_flush_plug_list(plug, false);
+ trace_block_plug(q);
+ }
}
- if (request_count >= BLK_MAX_REQUEST_COUNT)
- blk_flush_plug_list(plug, false);
list_add_tail(&req->queuelist, &plug->list);
drive_stat_acct(req, 1);
} else {
#include <linux/mempool.h>
#include <linux/bio.h>
#include <linux/scatterlist.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include "blk.h"
if (!iov[i].iov_len)
return -EINVAL;
- if (uaddr & queue_dma_alignment(q)) {
+ /*
+ * Keep going so we check length of all segments
+ */
+ if (uaddr & queue_dma_alignment(q))
unaligned = 1;
- break;
- }
}
if (unaligned || (q->dma_pad_mask & len) || map_data)
#include <linux/delay.h>
#include <linux/scatterlist.h>
#include <linux/bsg-lib.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <scsi/scsi_cmnd.h>
/**
#include <linux/mutex.h>
#include <linux/idr.h>
#include <linux/log2.h>
-#include <linux/ctype.h>
#include "blk.h"
subsys_initcall(genhd_device_init);
-static ssize_t alias_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct gendisk *disk = dev_to_disk(dev);
- ssize_t ret = 0;
-
- if (disk->alias)
- ret = snprintf(buf, ALIAS_LEN, "%s\n", disk->alias);
- return ret;
-}
-
-static ssize_t alias_store(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct gendisk *disk = dev_to_disk(dev);
- char *alias;
- char *envp[] = { NULL, NULL };
- unsigned char c;
- int i;
- ssize_t ret = count;
-
- if (!count)
- return -EINVAL;
-
- if (count >= ALIAS_LEN) {
- printk(KERN_ERR "alias: alias is too long\n");
- return -EINVAL;
- }
-
- /* Validation check */
- for (i = 0; i < count; i++) {
- c = buf[i];
- if (i == count - 1 && c == '\n')
- break;
- if (!isalnum(c) && c != '_' && c != '-') {
- printk(KERN_ERR "alias: invalid alias\n");
- return -EINVAL;
- }
- }
-
- if (disk->alias) {
- printk(KERN_INFO "alias: %s is already assigned (%s)\n",
- disk->disk_name, disk->alias);
- return -EINVAL;
- }
-
- alias = kasprintf(GFP_KERNEL, "%s", buf);
- if (!alias)
- return -ENOMEM;
-
- if (alias[count - 1] == '\n')
- alias[count - 1] = '\0';
-
- envp[0] = kasprintf(GFP_KERNEL, "ALIAS=%s", alias);
- if (!envp[0]) {
- kfree(alias);
- return -ENOMEM;
- }
-
- disk->alias = alias;
- printk(KERN_INFO "alias: assigned %s to %s\n", alias, disk->disk_name);
-
- kobject_uevent_env(&dev->kobj, KOBJ_ADD, envp);
-
- kfree(envp[0]);
- return ret;
-}
-
static ssize_t disk_range_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sprintf(buf, "%d\n", queue_discard_alignment(disk->queue));
}
-static DEVICE_ATTR(alias, S_IRUGO|S_IWUSR, alias_show, alias_store);
static DEVICE_ATTR(range, S_IRUGO, disk_range_show, NULL);
static DEVICE_ATTR(ext_range, S_IRUGO, disk_ext_range_show, NULL);
static DEVICE_ATTR(removable, S_IRUGO, disk_removable_show, NULL);
#endif
static struct attribute *disk_attrs[] = {
- &dev_attr_alias.attr,
&dev_attr_range.attr,
&dev_attr_ext_range.attr,
&dev_attr_removable.attr,
#include <linux/capability.h>
#include <linux/blkdev.h>
+#include <linux/export.h>
#include <linux/gfp.h>
#include <linux/blkpg.h>
#include <linux/hdreg.h>
return 0;
}
+#ifdef CONFIG_NET
static int crypto_ablkcipher_report(struct sk_buff *skb, struct crypto_alg *alg)
{
struct crypto_report_blkcipher rblkcipher;
nla_put_failure:
return -EMSGSIZE;
}
+#else
+static int crypto_ablkcipher_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+ return -ENOSYS;
+}
+#endif
static void crypto_ablkcipher_show(struct seq_file *m, struct crypto_alg *alg)
__attribute__ ((unused));
return 0;
}
+#ifdef CONFIG_NET
static int crypto_givcipher_report(struct sk_buff *skb, struct crypto_alg *alg)
{
struct crypto_report_blkcipher rblkcipher;
nla_put_failure:
return -EMSGSIZE;
}
+#else
+static int crypto_givcipher_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+ return -ENOSYS;
+}
+#endif
static void crypto_givcipher_show(struct seq_file *m, struct crypto_alg *alg)
__attribute__ ((unused));
return 0;
}
+#ifdef CONFIG_NET
static int crypto_aead_report(struct sk_buff *skb, struct crypto_alg *alg)
{
struct crypto_report_aead raead;
nla_put_failure:
return -EMSGSIZE;
}
+#else
+static int crypto_aead_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+ return -ENOSYS;
+}
+#endif
static void crypto_aead_show(struct seq_file *m, struct crypto_alg *alg)
__attribute__ ((unused));
return 0;
}
+#ifdef CONFIG_NET
static int crypto_nivaead_report(struct sk_buff *skb, struct crypto_alg *alg)
{
struct crypto_report_aead raead;
nla_put_failure:
return -EMSGSIZE;
}
+#else
+static int crypto_nivaead_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+ return -ENOSYS;
+}
+#endif
static void crypto_nivaead_show(struct seq_file *m, struct crypto_alg *alg)
return sizeof(struct crypto_shash *);
}
+#ifdef CONFIG_NET
static int crypto_ahash_report(struct sk_buff *skb, struct crypto_alg *alg)
{
struct crypto_report_hash rhash;
nla_put_failure:
return -EMSGSIZE;
}
+#else
+static int crypto_ahash_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+ return -ENOSYS;
+}
+#endif
static void crypto_ahash_show(struct seq_file *m, struct crypto_alg *alg)
__attribute__ ((unused));
*/
#include <linux/kernel.h>
#include <linux/highmem.h>
+#include <linux/module.h>
#include <linux/mm.h>
#include <linux/dma-mapping.h>
#include <linux/async_tx.h>
*/
#include <linux/kernel.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <linux/raid/pq.h>
#include <linux/async_tx.h>
*/
#include <linux/kernel.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <linux/raid/pq.h>
#include <linux/async_tx.h>
*
*/
#include <linux/rculist.h>
+#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/async_tx.h>
*/
#include <linux/kernel.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <linux/mm.h>
#include <linux/dma-mapping.h>
#include <linux/raid/xor.h>
#include <linux/gfp.h>
#include <linux/mm.h>
#include <linux/random.h>
+#include <linux/module.h>
#undef pr
#define pr(fmt, args...) pr_info("raid6test: " fmt, ##args)
return crypto_init_blkcipher_ops_async(tfm);
}
+#ifdef CONFIG_NET
static int crypto_blkcipher_report(struct sk_buff *skb, struct crypto_alg *alg)
{
struct crypto_report_blkcipher rblkcipher;
nla_put_failure:
return -EMSGSIZE;
}
+#else
+static int crypto_blkcipher_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+ return -ENOSYS;
+}
+#endif
static void crypto_blkcipher_show(struct seq_file *m, struct crypto_alg *alg)
__attribute__ ((unused));
down_read(&crypto_alg_sem);
- if (list_empty(&crypto_alg_list))
- return NULL;
-
list_for_each_entry(q, &crypto_alg_list, cra_list) {
int match = 0;
*/
#include <linux/workqueue.h>
+#include <linux/module.h>
#include <crypto/algapi.h>
#include <crypto/crypto_wq.h>
#include <crypto/internal/hash.h>
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/string.h>
#include <linux/types.h>
#include <asm/byteorder.h>
return 0;
}
+#ifdef CONFIG_NET
static int crypto_pcomp_report(struct sk_buff *skb, struct crypto_alg *alg)
{
struct crypto_report_comp rpcomp;
nla_put_failure:
return -EMSGSIZE;
}
+#else
+static int crypto_pcomp_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+ return -ENOSYS;
+}
+#endif
static void crypto_pcomp_show(struct seq_file *m, struct crypto_alg *alg)
__attribute__ ((unused));
#include <linux/atomic.h>
#include <linux/init.h>
#include <linux/crypto.h>
+#include <linux/module.h> /* for module_name() */
#include <linux/rwsem.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
return 0;
}
+#ifdef CONFIG_NET
static int crypto_rng_report(struct sk_buff *skb, struct crypto_alg *alg)
{
struct crypto_report_rng rrng;
nla_put_failure:
return -EMSGSIZE;
}
+#else
+static int crypto_rng_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+ return -ENOSYS;
+}
+#endif
static void crypto_rng_show(struct seq_file *m, struct crypto_alg *alg)
__attribute__ ((unused));
return alg->cra_ctxsize;
}
+#ifdef CONFIG_NET
static int crypto_shash_report(struct sk_buff *skb, struct crypto_alg *alg)
{
struct crypto_report_hash rhash;
nla_put_failure:
return -EMSGSIZE;
}
+#else
+static int crypto_shash_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+ return -ENOSYS;
+}
+#endif
static void crypto_shash_show(struct seq_file *m, struct crypto_alg *alg)
__attribute__ ((unused));
#include <linux/init.h>
#include <linux/types.h>
#include <linux/crypto.h>
+#include <linux/module.h>
#include <linux/scatterlist.h>
#include <asm/byteorder.h>
#include <crypto/scatterwalk.h>
#include <crypto/internal/hash.h>
#include <linux/err.h>
#include <linux/kernel.h>
+#include <linux/module.h>
static u_int32_t ks[12] = {0x01010101, 0x01010101, 0x01010101, 0x01010101,
0x02020202, 0x02020202, 0x02020202, 0x02020202,
* POSSIBILITY OF SUCH DAMAGES.
*/
+#include <linux/export.h>
#include <acpi/acpi.h>
#include "accommon.h"
#include "acnamesp.h"
* POSSIBILITY OF SUCH DAMAGES.
*/
+#include <linux/export.h>
#include <acpi/acpi.h>
#include "accommon.h"
#include "actables.h"
* POSSIBILITY OF SUCH DAMAGES.
*/
+#include <linux/export.h>
#include <acpi/acpi.h>
#include "accommon.h"
#include "acevents.h"
* POSSIBILITY OF SUCH DAMAGES.
*/
+#include <linux/export.h>
#include <acpi/acpi.h>
#include "accommon.h"
#include "acnamesp.h"
status = acpi_hw_register_write(ACPI_REGISTER_PM1_STATUS,
ACPI_BITMASK_ALL_FIXED_STATUS);
- if (ACPI_FAILURE(status)) {
- goto unlock_and_exit;
- }
+
+ acpi_os_release_lock(acpi_gbl_hardware_lock, lock_flags);
+
+ if (ACPI_FAILURE(status))
+ goto exit;
/* Clear the GPE Bits in all GPE registers in all GPE blocks */
status = acpi_ev_walk_gpe_list(acpi_hw_clear_gpe_block, NULL);
- unlock_and_exit:
- acpi_os_release_lock(acpi_gbl_hardware_lock, lock_flags);
+exit:
return_ACPI_STATUS(status);
}
#include "accommon.h"
#include "actables.h"
#include <linux/tboot.h>
+#include <linux/module.h>
#define _COMPONENT ACPI_HARDWARE
ACPI_MODULE_NAME("hwsleep")
* POSSIBILITY OF SUCH DAMAGES.
*/
+#include <linux/export.h>
#include <acpi/acpi.h>
#include "accommon.h"
* POSSIBILITY OF SUCH DAMAGES.
*/
+#include <linux/export.h>
#include <acpi/acpi.h>
#include "accommon.h"
#include "acnamesp.h"
* POSSIBILITY OF SUCH DAMAGES.
*/
+#include <linux/export.h>
#include <acpi/acpi.h>
#include "accommon.h"
#include "acnamesp.h"
* POSSIBILITY OF SUCH DAMAGES.
*/
+#include <linux/export.h>
#include <acpi/acpi.h>
#include "accommon.h"
#include "acnamesp.h"
* POSSIBILITY OF SUCH DAMAGES.
*/
+#include <linux/export.h>
#include <acpi/acpi.h>
#include "accommon.h"
#include "acnamesp.h"
* POSSIBILITY OF SUCH DAMAGES.
*/
+#include <linux/export.h>
#include <acpi/acpi.h>
#include "accommon.h"
#include "acresrc.h"
* POSSIBILITY OF SUCH DAMAGES.
*/
+#include <linux/export.h>
#include <acpi/acpi.h>
#include "accommon.h"
#include "acnamesp.h"
* POSSIBILITY OF SUCH DAMAGES.
*/
+#include <linux/export.h>
#include <acpi/acpi.h>
#include "accommon.h"
* POSSIBILITY OF SUCH DAMAGES.
*/
+#include <linux/export.h>
#include <acpi/acpi.h>
#include "accommon.h"
#include "acnamesp.h"
#define DEFINE_ACPI_GLOBALS
+#include <linux/export.h>
#include <acpi/acpi.h>
#include "accommon.h"
* POSSIBILITY OF SUCH DAMAGES.
*/
+#include <linux/export.h>
#include <acpi/acpi.h>
#include "accommon.h"
#include "acevents.h"
* POSSIBILITY OF SUCH DAMAGES.
*/
+#include <linux/export.h>
#include <acpi/acpi.h>
#include "accommon.h"
#include "acnamesp.h"
*/
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/acpi.h>
#include <linux/io.h>
{
struct acpi_iomap *map;
- map = __acpi_find_iomap(paddr, size);
+ map = __acpi_find_iomap(paddr, size/8);
if (map)
return map->vaddr + (paddr - map->paddr);
else
*/
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/init.h>
#include <linux/acpi.h>
#include <acpi/acpi_bus.h>
}
#endif
- status =
- acpi_enable_subsystem(~
- (ACPI_NO_HARDWARE_INIT |
- ACPI_NO_ACPI_ENABLE));
+ status = acpi_enable_subsystem(~ACPI_NO_ACPI_ENABLE);
if (ACPI_FAILURE(status)) {
printk(KERN_ERR PREFIX "Unable to enable ACPI\n");
goto error0;
acpi_os_initialize1();
- status =
- acpi_enable_subsystem(ACPI_NO_HARDWARE_INIT | ACPI_NO_ACPI_ENABLE);
+ status = acpi_enable_subsystem(ACPI_NO_ACPI_ENABLE);
if (ACPI_FAILURE(status)) {
printk(KERN_ERR PREFIX
"Unable to start the ACPI Interpreter\n");
* debugfs.c - ACPI debugfs interface to userspace.
*/
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/debugfs.h>
#include <acpi/acpi_drivers.h>
#include <linux/kernel.h>
#include <linux/acpi.h>
#include <linux/debugfs.h>
+#include <linux/module.h>
#include "internal.h"
MODULE_AUTHOR("Thomas Renninger <trenn@suse.de>");
*/
#include <linux/spinlock.h>
+#include <linux/export.h>
#include <linux/proc_fs.h>
#include <linux/init.h>
#include <linux/poll.h>
*
* This file is released under the GPLv2.
*/
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/device.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
+#include <linux/export.h>
#include <linux/suspend.h>
#include <linux/bcd.h>
#include <asm/uaccess.h>
* Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
* - Added _PDC for platforms with Intel CPUs
*/
+#include <linux/export.h>
#include <linux/dmi.h>
#include <linux/slab.h>
if (action == CPU_ONLINE && pr) {
acpi_processor_ppc_has_changed(pr, 0);
- acpi_processor_cst_has_changed(pr);
+ acpi_processor_hotplug(pr);
acpi_processor_reevaluate_tstate(pr, action);
acpi_processor_tstate_has_changed(pr);
}
acpi_processor_get_throttling_info(pr);
acpi_processor_get_limit_info(pr);
-
- if (cpuidle_get_driver() == &acpi_idle_driver)
+ if (!cpuidle_get_driver() || cpuidle_get_driver() == &acpi_idle_driver)
acpi_processor_power_init(pr, device);
pr->cdev = thermal_cooling_device_register("Processor", device,
memset(&errata, 0, sizeof(errata));
- if (!cpuidle_register_driver(&acpi_idle_driver)) {
- printk(KERN_DEBUG "ACPI: %s registered with cpuidle\n",
- acpi_idle_driver.name);
- } else {
- printk(KERN_DEBUG "ACPI: acpi_idle yielding to %s\n",
- cpuidle_get_driver()->name);
- }
-
result = acpi_bus_register_driver(&acpi_processor_driver);
if (result < 0)
- goto out_cpuidle;
+ return result;
acpi_processor_install_hotplug_notify();
acpi_processor_throttling_init();
return 0;
-
-out_cpuidle:
- cpuidle_unregister_driver(&acpi_idle_driver);
-
- return result;
}
static void __exit acpi_processor_exit(void)
/*
* Suspend / resume control
*/
-static int acpi_idle_suspend;
static u32 saved_bm_rld;
static void acpi_idle_bm_rld_save(void)
int acpi_processor_suspend(struct acpi_device * device, pm_message_t state)
{
- if (acpi_idle_suspend == 1)
- return 0;
-
acpi_idle_bm_rld_save();
- acpi_idle_suspend = 1;
return 0;
}
int acpi_processor_resume(struct acpi_device * device)
{
- if (acpi_idle_suspend == 0)
- return 0;
-
acpi_idle_bm_rld_restore();
- acpi_idle_suspend = 0;
return 0;
}
/**
* acpi_idle_enter_c1 - enters an ACPI C1 state-type
* @dev: the target CPU
- * @state: the state data
+ * @drv: cpuidle driver containing cpuidle state info
+ * @index: index of target state
*
* This is equivalent to the HALT instruction.
*/
static int acpi_idle_enter_c1(struct cpuidle_device *dev,
- struct cpuidle_state *state)
+ struct cpuidle_driver *drv, int index)
{
ktime_t kt1, kt2;
s64 idle_time;
struct acpi_processor *pr;
- struct acpi_processor_cx *cx = cpuidle_get_statedata(state);
+ struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
+ struct acpi_processor_cx *cx = cpuidle_get_statedata(state_usage);
pr = __this_cpu_read(processors);
+ dev->last_residency = 0;
if (unlikely(!pr))
- return 0;
+ return -EINVAL;
local_irq_disable();
- /* Do not access any ACPI IO ports in suspend path */
- if (acpi_idle_suspend) {
- local_irq_enable();
- cpu_relax();
- return 0;
- }
-
lapic_timer_state_broadcast(pr, cx, 1);
kt1 = ktime_get_real();
acpi_idle_do_entry(cx);
kt2 = ktime_get_real();
idle_time = ktime_to_us(ktime_sub(kt2, kt1));
+ /* Update device last_residency*/
+ dev->last_residency = (int)idle_time;
+
local_irq_enable();
cx->usage++;
lapic_timer_state_broadcast(pr, cx, 0);
- return idle_time;
+ return index;
}
/**
* acpi_idle_enter_simple - enters an ACPI state without BM handling
* @dev: the target CPU
- * @state: the state data
+ * @drv: cpuidle driver with cpuidle state information
+ * @index: the index of suggested state
*/
static int acpi_idle_enter_simple(struct cpuidle_device *dev,
- struct cpuidle_state *state)
+ struct cpuidle_driver *drv, int index)
{
struct acpi_processor *pr;
- struct acpi_processor_cx *cx = cpuidle_get_statedata(state);
+ struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
+ struct acpi_processor_cx *cx = cpuidle_get_statedata(state_usage);
ktime_t kt1, kt2;
s64 idle_time_ns;
s64 idle_time;
pr = __this_cpu_read(processors);
+ dev->last_residency = 0;
if (unlikely(!pr))
- return 0;
-
- if (acpi_idle_suspend)
- return(acpi_idle_enter_c1(dev, state));
+ return -EINVAL;
local_irq_disable();
if (unlikely(need_resched())) {
current_thread_info()->status |= TS_POLLING;
local_irq_enable();
- return 0;
+ return -EINVAL;
}
}
idle_time = idle_time_ns;
do_div(idle_time, NSEC_PER_USEC);
+ /* Update device last_residency*/
+ dev->last_residency = (int)idle_time;
+
/* Tell the scheduler how much we idled: */
sched_clock_idle_wakeup_event(idle_time_ns);
lapic_timer_state_broadcast(pr, cx, 0);
cx->time += idle_time;
- return idle_time;
+ return index;
}
static int c3_cpu_count;
/**
* acpi_idle_enter_bm - enters C3 with proper BM handling
* @dev: the target CPU
- * @state: the state data
+ * @drv: cpuidle driver containing state data
+ * @index: the index of suggested state
*
* If BM is detected, the deepest non-C3 idle state is entered instead.
*/
static int acpi_idle_enter_bm(struct cpuidle_device *dev,
- struct cpuidle_state *state)
+ struct cpuidle_driver *drv, int index)
{
struct acpi_processor *pr;
- struct acpi_processor_cx *cx = cpuidle_get_statedata(state);
+ struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
+ struct acpi_processor_cx *cx = cpuidle_get_statedata(state_usage);
ktime_t kt1, kt2;
s64 idle_time_ns;
s64 idle_time;
pr = __this_cpu_read(processors);
+ dev->last_residency = 0;
if (unlikely(!pr))
- return 0;
-
- if (acpi_idle_suspend)
- return(acpi_idle_enter_c1(dev, state));
+ return -EINVAL;
if (!cx->bm_sts_skip && acpi_idle_bm_check()) {
- if (dev->safe_state) {
- dev->last_state = dev->safe_state;
- return dev->safe_state->enter(dev, dev->safe_state);
+ if (drv->safe_state_index >= 0) {
+ return drv->states[drv->safe_state_index].enter(dev,
+ drv, drv->safe_state_index);
} else {
local_irq_disable();
acpi_safe_halt();
local_irq_enable();
- return 0;
+ return -EINVAL;
}
}
if (unlikely(need_resched())) {
current_thread_info()->status |= TS_POLLING;
local_irq_enable();
- return 0;
+ return -EINVAL;
}
}
idle_time = idle_time_ns;
do_div(idle_time, NSEC_PER_USEC);
+ /* Update device last_residency*/
+ dev->last_residency = (int)idle_time;
+
/* Tell the scheduler how much we idled: */
sched_clock_idle_wakeup_event(idle_time_ns);
lapic_timer_state_broadcast(pr, cx, 0);
cx->time += idle_time;
- return idle_time;
+ return index;
}
struct cpuidle_driver acpi_idle_driver = {
};
/**
- * acpi_processor_setup_cpuidle - prepares and configures CPUIDLE
+ * acpi_processor_setup_cpuidle_cx - prepares and configures CPUIDLE
+ * device i.e. per-cpu data
+ *
* @pr: the ACPI processor
*/
-static int acpi_processor_setup_cpuidle(struct acpi_processor *pr)
+static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr)
{
int i, count = CPUIDLE_DRIVER_STATE_START;
struct acpi_processor_cx *cx;
- struct cpuidle_state *state;
+ struct cpuidle_state_usage *state_usage;
struct cpuidle_device *dev = &pr->power.dev;
if (!pr->flags.power_setup_done)
}
dev->cpu = pr->id;
+
+ if (max_cstate == 0)
+ max_cstate = 1;
+
+ for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
+ cx = &pr->power.states[i];
+ state_usage = &dev->states_usage[count];
+
+ if (!cx->valid)
+ continue;
+
+#ifdef CONFIG_HOTPLUG_CPU
+ if ((cx->type != ACPI_STATE_C1) && (num_online_cpus() > 1) &&
+ !pr->flags.has_cst &&
+ !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED))
+ continue;
+#endif
+
+ cpuidle_set_statedata(state_usage, cx);
+
+ count++;
+ if (count == CPUIDLE_STATE_MAX)
+ break;
+ }
+
+ dev->state_count = count;
+
+ if (!count)
+ return -EINVAL;
+
+ return 0;
+}
+
+/**
+ * acpi_processor_setup_cpuidle states- prepares and configures cpuidle
+ * global state data i.e. idle routines
+ *
+ * @pr: the ACPI processor
+ */
+static int acpi_processor_setup_cpuidle_states(struct acpi_processor *pr)
+{
+ int i, count = CPUIDLE_DRIVER_STATE_START;
+ struct acpi_processor_cx *cx;
+ struct cpuidle_state *state;
+ struct cpuidle_driver *drv = &acpi_idle_driver;
+
+ if (!pr->flags.power_setup_done)
+ return -EINVAL;
+
+ if (pr->flags.power == 0)
+ return -EINVAL;
+
+ drv->safe_state_index = -1;
for (i = 0; i < CPUIDLE_STATE_MAX; i++) {
- dev->states[i].name[0] = '\0';
- dev->states[i].desc[0] = '\0';
+ drv->states[i].name[0] = '\0';
+ drv->states[i].desc[0] = '\0';
}
if (max_cstate == 0)
for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
cx = &pr->power.states[i];
- state = &dev->states[count];
if (!cx->valid)
continue;
!(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED))
continue;
#endif
- cpuidle_set_statedata(state, cx);
+ state = &drv->states[count];
snprintf(state->name, CPUIDLE_NAME_LEN, "C%d", i);
strncpy(state->desc, cx->desc, CPUIDLE_DESC_LEN);
state->exit_latency = cx->latency;
state->flags |= CPUIDLE_FLAG_TIME_VALID;
state->enter = acpi_idle_enter_c1;
- dev->safe_state = state;
+ drv->safe_state_index = count;
break;
case ACPI_STATE_C2:
state->flags |= CPUIDLE_FLAG_TIME_VALID;
state->enter = acpi_idle_enter_simple;
- dev->safe_state = state;
+ drv->safe_state_index = count;
break;
case ACPI_STATE_C3:
break;
}
- dev->state_count = count;
+ drv->state_count = count;
if (!count)
return -EINVAL;
return 0;
}
-int acpi_processor_cst_has_changed(struct acpi_processor *pr)
+int acpi_processor_hotplug(struct acpi_processor *pr)
{
int ret = 0;
cpuidle_disable_device(&pr->power.dev);
acpi_processor_get_power_info(pr);
if (pr->flags.power) {
- acpi_processor_setup_cpuidle(pr);
+ acpi_processor_setup_cpuidle_cx(pr);
ret = cpuidle_enable_device(&pr->power.dev);
}
cpuidle_resume_and_unlock();
return ret;
}
+int acpi_processor_cst_has_changed(struct acpi_processor *pr)
+{
+ int cpu;
+ struct acpi_processor *_pr;
+
+ if (disabled_by_idle_boot_param())
+ return 0;
+
+ if (!pr)
+ return -EINVAL;
+
+ if (nocst)
+ return -ENODEV;
+
+ if (!pr->flags.power_setup_done)
+ return -ENODEV;
+
+ /*
+ * FIXME: Design the ACPI notification to make it once per
+ * system instead of once per-cpu. This condition is a hack
+ * to make the code that updates C-States be called once.
+ */
+
+ if (smp_processor_id() == 0 &&
+ cpuidle_get_driver() == &acpi_idle_driver) {
+
+ cpuidle_pause_and_lock();
+ /* Protect against cpu-hotplug */
+ get_online_cpus();
+
+ /* Disable all cpuidle devices */
+ for_each_online_cpu(cpu) {
+ _pr = per_cpu(processors, cpu);
+ if (!_pr || !_pr->flags.power_setup_done)
+ continue;
+ cpuidle_disable_device(&_pr->power.dev);
+ }
+
+ /* Populate Updated C-state information */
+ acpi_processor_setup_cpuidle_states(pr);
+
+ /* Enable all cpuidle devices */
+ for_each_online_cpu(cpu) {
+ _pr = per_cpu(processors, cpu);
+ if (!_pr || !_pr->flags.power_setup_done)
+ continue;
+ acpi_processor_get_power_info(_pr);
+ if (_pr->flags.power) {
+ acpi_processor_setup_cpuidle_cx(_pr);
+ cpuidle_enable_device(&_pr->power.dev);
+ }
+ }
+ put_online_cpus();
+ cpuidle_resume_and_unlock();
+ }
+
+ return 0;
+}
+
+static int acpi_processor_registered;
+
int __cpuinit acpi_processor_power_init(struct acpi_processor *pr,
struct acpi_device *device)
{
acpi_status status = 0;
+ int retval;
static int first_run;
if (disabled_by_idle_boot_param())
* platforms that only support C1.
*/
if (pr->flags.power) {
- acpi_processor_setup_cpuidle(pr);
- if (cpuidle_register_device(&pr->power.dev))
- return -EIO;
+ /* Register acpi_idle_driver if not already registered */
+ if (!acpi_processor_registered) {
+ acpi_processor_setup_cpuidle_states(pr);
+ retval = cpuidle_register_driver(&acpi_idle_driver);
+ if (retval)
+ return retval;
+ printk(KERN_DEBUG "ACPI: %s registered with cpuidle\n",
+ acpi_idle_driver.name);
+ }
+ /* Register per-cpu cpuidle_device. Cpuidle driver
+ * must already be registered before registering device
+ */
+ acpi_processor_setup_cpuidle_cx(pr);
+ retval = cpuidle_register_device(&pr->power.dev);
+ if (retval) {
+ if (acpi_processor_registered == 0)
+ cpuidle_unregister_driver(&acpi_idle_driver);
+ return retval;
+ }
+ acpi_processor_registered++;
}
return 0;
}
if (disabled_by_idle_boot_param())
return 0;
- cpuidle_unregister_device(&pr->power.dev);
- pr->flags.power_setup_done = 0;
+ if (pr->flags.power) {
+ cpuidle_unregister_device(&pr->power.dev);
+ acpi_processor_registered--;
+ if (acpi_processor_registered == 0)
+ cpuidle_unregister_driver(&acpi_idle_driver);
+ }
+ pr->flags.power_setup_done = 0;
return 0;
}
#include <linux/wait.h>
#include <linux/slab.h>
#include <linux/delay.h>
+#include <linux/module.h>
#include <linux/interrupt.h>
#include "sbshc.h"
if (!id)
return;
- id->id = kmalloc(strlen(dev_id) + 1, GFP_KERNEL);
+ id->id = kstrdup(dev_id, GFP_KERNEL);
if (!id->id) {
kfree(id);
return;
}
- strcpy(id->id, dev_id);
list_add_tail(&id->list, &device->pnp.ids);
}
},
{
.callback = init_nvs_nosave,
+ .ident = "Sony Vaio VPCEB17FX",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB17FX"),
+ },
+ },
+ {
+ .callback = init_nvs_nosave,
.ident = "Sony Vaio VGN-SR11M",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
return;
}
+static ssize_t
+acpi_show_profile(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%d\n", acpi_gbl_FADT.preferred_profile);
+}
+
+static const struct device_attribute pm_profile_attr =
+ __ATTR(pm_profile, S_IRUGO, acpi_show_profile, NULL);
+
int __init acpi_sysfs_init(void)
{
int result;
result = acpi_tables_sysfs_init();
-
+ if (result)
+ return result;
+ result = sysfs_create_file(acpi_kobj, &pm_profile_attr.attr);
return result;
}
*
*/
+#include <linux/export.h>
#include <linux/acpi.h>
#include <linux/dmi.h>
#include <linux/pci.h>
/* Promise */
{ PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */
+ /* Asmedia */
+ { PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci }, /* ASM1061 */
+
/* Generic, PCI class code for AHCI */
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci },
static int __init ahci_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct ahci_platform_data *pdata = dev->platform_data;
+ struct ahci_platform_data *pdata = dev_get_platdata(dev);
const struct platform_device_id *id = platform_get_device_id(pdev);
struct ata_port_info pi = ahci_port_info[id->driver_data];
const struct ata_port_info *ppi[] = { &pi, NULL };
static int __devexit ahci_remove(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct ahci_platform_data *pdata = dev->platform_data;
+ struct ahci_platform_data *pdata = dev_get_platdata(dev);
struct ata_host *host = dev_get_drvdata(dev);
ata_host_detach(host);
#include <linux/kernel.h>
#include <linux/blkdev.h>
+#include <linux/export.h>
#include <linux/pci.h>
#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
sata_scr_read(link, SCR_STATUS, &sstatus))
rc = -ERESTART;
- if (rc == -ERESTART || try >= max_tries) {
+ if (try >= max_tries) {
/*
* Thaw host port even if reset failed, so that the port
* can be retried on the next phy event. This risks
ata_eh_acquire(ap);
}
+ /*
+ * While disks spinup behind PMP, some controllers fail sending SRST.
+ * They need to be reset - as well as the PMP - before retrying.
+ */
+ if (rc == -ERESTART) {
+ if (ata_is_host_link(link))
+ ata_eh_thaw_port(ap);
+ goto out;
+ }
+
if (try == max_tries - 1) {
sata_down_spd_limit(link, 0);
if (slave)
*/
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/libata.h>
#include <linux/slab.h>
#include "libata.h"
/* link reports offline after LPM */
link->flags |= ATA_LFLAG_NO_LPM;
- /* Class code report is unreliable and SRST
- * times out under certain configurations.
- */
+ /* Class code report is unreliable. */
if (link->pmp < 5)
- link->flags |= ATA_LFLAG_NO_SRST |
- ATA_LFLAG_ASSUME_ATA;
+ link->flags |= ATA_LFLAG_ASSUME_ATA;
/* port 5 is for SEMB device and it doesn't like SRST */
if (link->pmp == 5)
#include <linux/kernel.h>
#include <linux/blkdev.h>
#include <linux/spinlock.h>
+#include <linux/export.h>
#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_cmnd.h>
/**
* __ata_change_queue_depth - helper for ata_scsi_change_queue_depth
+ * @ap: ATA port to which the device change the queue depth
+ * @sdev: SCSI device to configure queue depth for
+ * @queue_depth: new queue depth
+ * @reason: calling context
*
* libsas and libata have different approaches for associating a sdev to
* its ata_port.
#include <linux/kernel.h>
#include <linux/gfp.h>
#include <linux/pci.h>
+#include <linux/module.h>
#include <linux/libata.h>
#include <linux/highmem.h>
}
ret = of_irq_to_resource(dn, 0, &irq_res);
- if (ret == NO_IRQ)
+ if (!ret)
irq_res.start = irq_res.end = 0;
else
irq_res.flags = 0;
};
MODULE_AUTHOR("Uwe Koziolek");
-MODULE_DESCRIPTION("low-level driver for Silicon Integratad Systems SATA controller");
+MODULE_DESCRIPTION("low-level driver for Silicon Integrated Systems SATA controller");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, sis_pci_tbl);
MODULE_VERSION(DRV_VERSION);
+#include <linux/notifier.h>
/**
* struct subsys_private - structure to hold the private to the driver core portions of the bus_type/class structure.
#include <linux/kallsyms.h>
#include <linux/mutex.h>
#include <linux/async.h>
+#include <linux/pm_runtime.h>
#include "base.h"
#include "power/power.h"
*/
list_del_init(&dev->kobj.entry);
spin_unlock(&devices_kset->list_lock);
+ /* Disable all device's runtime power management */
+ pm_runtime_disable(dev);
if (dev->bus && dev->bus->shutdown) {
dev_dbg(dev, "shutdown\n");
*/
#include <linux/slab.h>
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/dma-mapping.h>
struct dma_coherent_mem {
*/
#include <linux/dma-mapping.h>
+#include <linux/export.h>
#include <linux/gfp.h>
/*
#include <linux/kobject.h>
#include <linux/device.h>
+#include <linux/export.h>
#include "base.h"
struct kobject *hypervisor_kobj;
list_for_each_entry_reverse(ce, &psd->clock_list, node) {
if (ce->status < PCE_STATUS_ERROR) {
- clk_disable(ce->clk);
+ if (ce->status == PCE_STATUS_ENABLED)
+ clk_disable(ce->clk);
ce->status = PCE_STATUS_ACQUIRED;
}
}
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <linux/pm_clock.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
+#include <linux/export.h>
#ifdef CONFIG_PM_RUNTIME
/**
#include <linux/device.h>
#include <linux/kallsyms.h>
+#include <linux/export.h>
#include <linux/mutex.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
End:
if (!error) {
dev->power.is_suspended = true;
- if (dev->power.wakeup_path && dev->parent)
+ if (dev->power.wakeup_path
+ && dev->parent && !dev->parent->power.ignore_children)
dev->parent->power.wakeup_path = true;
}
struct device_opp *dev_opp = find_device_opp(dev);
if (IS_ERR(dev_opp))
- return ERR_PTR(PTR_ERR(dev_opp)); /* matching type */
+ return ERR_CAST(dev_opp); /* matching type */
return &dev_opp->head;
}
#include <linux/slab.h>
#include <linux/device.h>
#include <linux/mutex.h>
+#include <linux/export.h>
static DEFINE_MUTEX(dev_pm_qos_mtx);
if (!dev || !req) /*guard against callers passing in null */
return -EINVAL;
- if (dev_pm_qos_request_active(req)) {
- WARN(1, KERN_ERR "dev_pm_qos_add_request() called for already "
- "added request\n");
+ if (WARN(dev_pm_qos_request_active(req),
+ "%s() called for already added request\n", __func__))
return -EINVAL;
- }
req->dev = dev;
if (!req) /*guard against callers passing in null */
return -EINVAL;
- if (!dev_pm_qos_request_active(req)) {
- WARN(1, KERN_ERR "dev_pm_qos_update_request() called for "
- "unknown object\n");
+ if (WARN(!dev_pm_qos_request_active(req),
+ "%s() called for unknown object\n", __func__))
return -EINVAL;
- }
mutex_lock(&dev_pm_qos_mtx);
if (!req) /*guard against callers passing in null */
return -EINVAL;
- if (!dev_pm_qos_request_active(req)) {
- WARN(1, KERN_ERR "dev_pm_qos_remove_request() called for "
- "unknown object\n");
+ if (WARN(!dev_pm_qos_request_active(req),
+ "%s() called for unknown object\n", __func__))
return -EINVAL;
- }
mutex_lock(&dev_pm_qos_mtx);
*/
#include <linux/sched.h>
+#include <linux/export.h>
#include <linux/pm_runtime.h>
#include <trace/events/rpm.h>
#include "power.h"
void update_pm_runtime_accounting(struct device *dev)
{
unsigned long now = jiffies;
- int delta;
+ unsigned long delta;
delta = now - dev->power.accounting_timestamp;
- if (delta < 0)
- delta = 0;
-
dev->power.accounting_timestamp = now;
if (dev->power.disable_depth > 0)
* the callback was running then carry it out, otherwise send an idle
* notification for its parent (if the suspend succeeded and both
* ignore_children of parent->power and irq_safe of dev->power are not set).
+ * If ->runtime_suspend failed with -EAGAIN or -EBUSY, and if the RPM_AUTO
+ * flag is set and the next autosuspend-delay expiration time is in the
+ * future, schedule another autosuspend attempt.
*
* This function must be called under dev->power.lock with interrupts disabled.
*/
if (retval) {
__update_runtime_status(dev, RPM_ACTIVE);
dev->power.deferred_resume = false;
- if (retval == -EAGAIN || retval == -EBUSY)
+ if (retval == -EAGAIN || retval == -EBUSY) {
dev->power.runtime_error = 0;
- else
+
+ /*
+ * If the callback routine failed an autosuspend, and
+ * if the last_busy time has been updated so that there
+ * is a new autosuspend expiration time, automatically
+ * reschedule another autosuspend.
+ */
+ if ((rpmflags & RPM_AUTO) &&
+ pm_runtime_autosuspend_expiration(dev) != 0)
+ goto repeat;
+ } else {
pm_runtime_cancel_pending(dev);
+ }
wake_up_all(&dev->power.wait_queue);
goto out;
}
#include <linux/device.h>
#include <linux/string.h>
+#include <linux/export.h>
#include <linux/pm_runtime.h>
#include <linux/atomic.h>
#include <linux/jiffies.h>
*/
#include <linux/resume-trace.h>
+#include <linux/export.h>
#include <linux/rtc.h>
#include <asm/rtc.h>
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/capability.h>
+#include <linux/export.h>
#include <linux/suspend.h>
#include <linux/seq_file.h>
#include <linux/debugfs.h>
*/
#include <linux/slab.h>
+#include <linux/export.h>
#include <trace/events/regmap.h>
#include <linux/bsearch.h>
#include <linux/sort.h>
* transport class is framed entirely in terms of generic devices to
* allow it to be used by any physical HBA in the system.
*/
+#include <linux/export.h>
#include <linux/attribute_container.h>
#include <linux/transport_class.h>
*/
#include "bcma_private.h"
+#include <linux/export.h>
#include <linux/bcma/bcma.h>
bool bcma_core_is_enabled(struct bcma_device *core)
*/
#include "bcma_private.h"
+#include <linux/export.h>
#include <linux/bcma/bcma.h>
static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset,
*/
#include "bcma_private.h"
+#include <linux/export.h>
#include <linux/bcma/bcma.h>
static u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset)
*/
#include "bcma_private.h"
+#include <linux/export.h>
#include <linux/bcma/bcma.h>
/**************************************************
#include <linux/slab.h>
#include <linux/bcma/bcma.h>
#include <linux/pci.h>
+#include <linux/module.h>
static void bcma_host_pci_switch_core(struct bcma_device *core)
{
*/
#include "bcma_private.h"
+#include <linux/module.h>
#include <linux/bcma/bcma.h>
#include <linux/slab.h>
#include <linux/genhd.h>
#include <linux/netdevice.h>
#include <linux/mutex.h>
+#include <linux/export.h>
#include "aoe.h"
static DEFINE_MUTEX(aoeblk_mutex);
#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/skbuff.h>
+#include <linux/export.h>
#include "aoe.h"
enum {
#include <linux/interrupt.h>
#include <linux/types.h>
#include <linux/pci.h>
+#include <linux/pci-aspm.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/delay.h>
dev_warn(&h->pdev->dev, "controller appears to be disabled\n");
return -ENODEV;
}
+
+ pci_disable_link_state(h->pdev, PCIE_LINK_STATE_L0S |
+ PCIE_LINK_STATE_L1 | PCIE_LINK_STATE_CLKPM);
+
err = pci_enable_device(h->pdev);
if (err) {
dev_warn(&h->pdev->dev, "Unable to Enable PCI device\n");
h->cciss_max_sectors = 8192;
rebuild_lun_table(h, 1, 0);
+ cciss_engage_scsi(h);
h->busy_initializing = 0;
return 1;
/* If no tape support, then these become defined out of existence */
#define cciss_scsi_setup(cntl_num)
+#define cciss_engage_scsi(h)
#endif /* CONFIG_CISS_SCSI_TAPE */
&xor_funcs
};
-static loff_t get_loop_size(struct loop_device *lo, struct file *file)
+static loff_t get_size(loff_t offset, loff_t sizelimit, struct file *file)
{
- loff_t size, offset, loopsize;
+ loff_t size, loopsize;
/* Compute loopsize in bytes */
size = i_size_read(file->f_mapping->host);
- offset = lo->lo_offset;
loopsize = size - offset;
- if (lo->lo_sizelimit > 0 && lo->lo_sizelimit < loopsize)
- loopsize = lo->lo_sizelimit;
+ /* offset is beyond i_size, wierd but possible */
+ if (loopsize < 0)
+ return 0;
+ if (sizelimit > 0 && sizelimit < loopsize)
+ loopsize = sizelimit;
/*
* Unfortunately, if we want to do I/O on the device,
* the number of 512-byte sectors has to fit into a sector_t.
return loopsize >> 9;
}
+static loff_t get_loop_size(struct loop_device *lo, struct file *file)
+{
+ return get_size(lo->lo_offset, lo->lo_sizelimit, file);
+}
+
static int
-figure_loop_size(struct loop_device *lo)
+figure_loop_size(struct loop_device *lo, loff_t offset, loff_t sizelimit)
{
- loff_t size = get_loop_size(lo, lo->lo_backing_file);
+ loff_t size = get_size(offset, sizelimit, lo->lo_backing_file);
sector_t x = (sector_t)size;
if (unlikely((loff_t)x != size))
return -EFBIG;
-
+ if (lo->lo_offset != offset)
+ lo->lo_offset = offset;
+ if (lo->lo_sizelimit != sizelimit)
+ lo->lo_sizelimit = sizelimit;
set_capacity(lo->lo_disk, x);
- return 0;
+ return 0;
}
static inline int
if (retval < 0)
return retval;
-
+ if (retval != bvec->bv_len)
+ return -EIO;
return 0;
}
if (lo->lo_offset != info->lo_offset ||
lo->lo_sizelimit != info->lo_sizelimit) {
- lo->lo_offset = info->lo_offset;
- lo->lo_sizelimit = info->lo_sizelimit;
- if (figure_loop_size(lo))
+ if (figure_loop_size(lo, info->lo_offset, info->lo_sizelimit))
return -EFBIG;
}
loop_config_discard(lo);
err = -ENXIO;
if (unlikely(lo->lo_state != Lo_bound))
goto out;
- err = figure_loop_size(lo);
+ err = figure_loop_size(lo, lo->lo_offset, lo->lo_sizelimit);
if (unlikely(err))
goto out;
sec = get_capacity(lo->lo_disk);
goto out_unlocked;
break;
case LOOP_SET_STATUS:
- err = loop_set_status_old(lo, (struct loop_info __user *) arg);
+ err = -EPERM;
+ if ((mode & FMODE_WRITE) || capable(CAP_SYS_ADMIN))
+ err = loop_set_status_old(lo,
+ (struct loop_info __user *)arg);
break;
case LOOP_GET_STATUS:
err = loop_get_status_old(lo, (struct loop_info __user *) arg);
break;
case LOOP_SET_STATUS64:
- err = loop_set_status64(lo, (struct loop_info64 __user *) arg);
+ err = -EPERM;
+ if ((mode & FMODE_WRITE) || capable(CAP_SYS_ADMIN))
+ err = loop_set_status64(lo,
+ (struct loop_info64 __user *) arg);
break;
case LOOP_GET_STATUS64:
err = loop_get_status64(lo, (struct loop_info64 __user *) arg);
if (dev->status & 0x10)
return -ETIME;
+ memset(&hdr, 0, sizeof(hdr));
hdr.magic = PG_MAGIC;
hdr.dlen = dev->dlen;
copy = 0;
#include <linux/ata.h>
#include <linux/blkdev.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <asm/lv1call.h>
#include <asm/ps3stor.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
+#include <linux/module.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/slab.h>
#include <linux/blkdev.h>
#include <linux/hdreg.h>
+#include <linux/module.h>
#include <linux/virtio.h>
#include <linux/virtio_blk.h>
#include <linux/scatterlist.h>
enum blkif_protocol blk_protocol;
enum blkif_backend_type blk_backend_type;
union blkif_back_rings blk_rings;
- struct vm_struct *blk_ring_area;
+ void *blk_ring;
/* The VBD attached to this interface. */
struct xen_vbd vbd;
/* Back pointer to the backend_info. */
int st_wr_sect;
wait_queue_head_t waiting_to_free;
-
- grant_handle_t shmem_handle;
- grant_ref_t shmem_ref;
};
return blkif;
}
-static int map_frontend_page(struct xen_blkif *blkif, unsigned long shared_page)
-{
- struct gnttab_map_grant_ref op;
-
- gnttab_set_map_op(&op, (unsigned long)blkif->blk_ring_area->addr,
- GNTMAP_host_map, shared_page, blkif->domid);
-
- if (HYPERVISOR_grant_table_op(GNTTABOP_map_grant_ref, &op, 1))
- BUG();
-
- if (op.status) {
- DPRINTK("Grant table operation failure !\n");
- return op.status;
- }
-
- blkif->shmem_ref = shared_page;
- blkif->shmem_handle = op.handle;
-
- return 0;
-}
-
-static void unmap_frontend_page(struct xen_blkif *blkif)
-{
- struct gnttab_unmap_grant_ref op;
-
- gnttab_set_unmap_op(&op, (unsigned long)blkif->blk_ring_area->addr,
- GNTMAP_host_map, blkif->shmem_handle);
-
- if (HYPERVISOR_grant_table_op(GNTTABOP_unmap_grant_ref, &op, 1))
- BUG();
-}
-
static int xen_blkif_map(struct xen_blkif *blkif, unsigned long shared_page,
unsigned int evtchn)
{
if (blkif->irq)
return 0;
- blkif->blk_ring_area = alloc_vm_area(PAGE_SIZE);
- if (!blkif->blk_ring_area)
- return -ENOMEM;
-
- err = map_frontend_page(blkif, shared_page);
- if (err) {
- free_vm_area(blkif->blk_ring_area);
+ err = xenbus_map_ring_valloc(blkif->be->dev, shared_page, &blkif->blk_ring);
+ if (err < 0)
return err;
- }
switch (blkif->blk_protocol) {
case BLKIF_PROTOCOL_NATIVE:
{
struct blkif_sring *sring;
- sring = (struct blkif_sring *)blkif->blk_ring_area->addr;
+ sring = (struct blkif_sring *)blkif->blk_ring;
BACK_RING_INIT(&blkif->blk_rings.native, sring, PAGE_SIZE);
break;
}
case BLKIF_PROTOCOL_X86_32:
{
struct blkif_x86_32_sring *sring_x86_32;
- sring_x86_32 = (struct blkif_x86_32_sring *)blkif->blk_ring_area->addr;
+ sring_x86_32 = (struct blkif_x86_32_sring *)blkif->blk_ring;
BACK_RING_INIT(&blkif->blk_rings.x86_32, sring_x86_32, PAGE_SIZE);
break;
}
case BLKIF_PROTOCOL_X86_64:
{
struct blkif_x86_64_sring *sring_x86_64;
- sring_x86_64 = (struct blkif_x86_64_sring *)blkif->blk_ring_area->addr;
+ sring_x86_64 = (struct blkif_x86_64_sring *)blkif->blk_ring;
BACK_RING_INIT(&blkif->blk_rings.x86_64, sring_x86_64, PAGE_SIZE);
break;
}
xen_blkif_be_int, 0,
"blkif-backend", blkif);
if (err < 0) {
- unmap_frontend_page(blkif);
- free_vm_area(blkif->blk_ring_area);
+ xenbus_unmap_ring_vfree(blkif->be->dev, blkif->blk_ring);
blkif->blk_rings.common.sring = NULL;
return err;
}
}
if (blkif->blk_rings.common.sring) {
- unmap_frontend_page(blkif);
- free_vm_area(blkif->blk_ring_area);
+ xenbus_unmap_ring_vfree(blkif->be->dev, blkif->blk_ring);
blkif->blk_rings.common.sring = NULL;
}
}
pipe = usb_sndctrlpipe(udev, 0);
- send_buf = kmalloc(BULK_SIZE, GFP_ATOMIC);
+ send_buf = kmalloc(BULK_SIZE, GFP_KERNEL);
if (!send_buf) {
BT_ERR("Can't allocate memory chunk for firmware");
return -ENOMEM;
count = firmware->size;
- send_buf = kmalloc(BULK_SIZE, GFP_ATOMIC);
+ send_buf = kmalloc(BULK_SIZE, GFP_KERNEL);
if (!send_buf) {
BT_ERR("Can't allocate memory chunk for firmware");
return -ENOMEM;
#include <linux/module.h>
+#include <linux/atomic.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/slab.h>
unsigned long state;
struct work_struct work;
+ atomic_t shutdown;
struct urb *urb;
unsigned char *buffer;
data->state = BCM203X_SELECT_MEMORY;
+ /* use workqueue to have a small delay */
schedule_work(&data->work);
break;
struct bcm203x_data *data =
container_of(work, struct bcm203x_data, work);
- if (usb_submit_urb(data->urb, GFP_ATOMIC) < 0)
+ if (atomic_read(&data->shutdown))
+ return;
+
+ if (usb_submit_urb(data->urb, GFP_KERNEL) < 0)
BT_ERR("Can't submit URB");
}
usb_set_intfdata(intf, data);
+ /* use workqueue to have a small delay */
schedule_work(&data->work);
return 0;
BT_DBG("intf %p", intf);
+ atomic_inc(&data->shutdown);
+ cancel_work_sync(&data->work);
+
usb_kill_urb(data->urb);
usb_set_intfdata(intf, NULL);
BT_INFO("BlueFRITZ! USB loading firmware");
+ buf = kmalloc(BFUSB_MAX_BLOCK_SIZE + 3, GFP_KERNEL);
+ if (!buf) {
+ BT_ERR("Can't allocate memory chunk for firmware");
+ return -ENOMEM;
+ }
+
pipe = usb_sndctrlpipe(data->udev, 0);
if (usb_control_msg(data->udev, pipe, USB_REQ_SET_CONFIGURATION,
0, 1, 0, NULL, 0, USB_CTRL_SET_TIMEOUT) < 0) {
BT_ERR("Can't change to loading configuration");
+ kfree(buf);
return -EBUSY;
}
data->udev->toggle[0] = data->udev->toggle[1] = 0;
- buf = kmalloc(BFUSB_MAX_BLOCK_SIZE + 3, GFP_ATOMIC);
- if (!buf) {
- BT_ERR("Can't allocate memory chunk for firmware");
- return -ENOMEM;
- }
-
pipe = usb_sndbulkpipe(data->udev, data->bulk_out_ep);
while (count) {
* this warranty disclaimer.
**/
+#include <linux/module.h>
+
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#include <linux/mmc/sdio_ids.h>
#include <linux/mmc/sdio_func.h>
+#include <linux/module.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
/* Canyon CN-BTU1 with HID interfaces */
{ USB_DEVICE(0x0c10, 0x0000) },
+ /* Broadcom BCM20702A0 */
+ { USB_DEVICE(0x413c, 0x8197) },
+
{ } /* Terminating entry */
};
#include <net/bluetooth/hci.h>
#include <linux/ti_wilink_st.h>
+#include <linux/module.h>
/* Bluetooth Driver Version */
#define VERSION "1.0"
/* Certain Gen5 chipsets require require idling the GPU before
* unmapping anything from the GTT when VT-d is enabled.
*/
-extern int intel_iommu_gfx_mapped;
static inline int needs_idle_maps(void)
{
+#ifdef CONFIG_INTEL_IOMMU
const unsigned short gpu_devid = intel_private.pcidev->device;
+ extern int intel_iommu_gfx_mapped;
/* Query intel_iommu to see if we need the workaround. Presumably that
* was loaded first.
gpu_devid == PCI_DEVICE_ID_INTEL_IRONLAKE_M_IG) &&
intel_iommu_gfx_mapped)
return 1;
-
+#endif
return 0;
}
intel_private.gtt_bus_addr = reg_addr + gtt_offset;
}
- if (needs_idle_maps());
+ if (needs_idle_maps())
intel_private.base.do_idle_maps = 1;
intel_i9xx_setup_flush();
#include <linux/spinlock.h>
#include <linux/virtio.h>
#include <linux/virtio_rng.h>
+#include <linux/module.h>
static struct virtqueue *vq;
static unsigned int data_avail;
#include <linux/bootmem.h>
#include <linux/splice.h>
#include <linux/pfn.h>
+#include <linux/export.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <linux/miscdevice.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
+#include <linux/module.h>
#include <asm/lv1call.h>
#include <asm/ps3stor.h>
#include <linux/module.h>
#include <linux/kmsg_dump.h>
#include <linux/time.h>
+#include <linux/err.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
if (!arch_get_random_long(&v))
break;
- memcpy(buf, &v, chunk);
+ memcpy(p, &v, chunk);
p += chunk;
nbytes -= chunk;
}
#include <linux/device.h>
#include <linux/serial.h>
#include <linux/tty.h>
+#include <linux/export.h>
struct ttyprintk_port {
struct tty_port port;
#include <linux/virtio_console.h>
#include <linux/wait.h>
#include <linux/workqueue.h>
+#include <linux/module.h>
#include "../tty/hvc/hvc_console.h"
/*
#include <linux/clockchips.h>
#include <linux/sh_timer.h>
#include <linux/slab.h>
+#include <linux/module.h>
struct sh_cmt_priv {
void __iomem *mapbase;
#include <linux/clockchips.h>
#include <linux/sh_timer.h>
#include <linux/slab.h>
+#include <linux/module.h>
struct sh_mtu2_priv {
void __iomem *mapbase;
#include <linux/clockchips.h>
#include <linux/sh_timer.h>
#include <linux/slab.h>
+#include <linux/module.h>
struct sh_tmu_priv {
void __iomem *mapbase;
#include <linux/cpu.h>
#include <linux/sysfs.h>
#include <linux/cpufreq.h>
+#include <linux/module.h>
#include <linux/jiffies.h>
#include <linux/percpu.h>
#include <linux/kobject.h>
static int __cpuinit db8500_cpufreq_init(struct cpufreq_policy *policy)
{
- int res;
+ int i, res;
BUILD_BUG_ON(ARRAY_SIZE(idx2opp) + 1 != ARRAY_SIZE(freq_table));
freq_table[3].frequency = 1000000;
}
pr_info("db8500-cpufreq : Available frequencies:\n");
- while (freq_table[i].frequency != CPUFREQ_TABLE_END)
- pr_info(" %d Mhz\n", freq_table[i++].frequency/1000);
+ for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++)
+ pr_info(" %d Mhz\n", freq_table[i].frequency/1000);
/* get policy fields based on the table */
res = cpufreq_frequency_table_cpuinfo(policy, freq_table);
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/regulator/consumer.h>
+#include <linux/module.h>
static struct clk *armclk;
static struct regulator *vddarm;
#include <linux/cpuidle.h>
#include <linux/ktime.h>
#include <linux/hrtimer.h>
+#include <linux/module.h>
#include <trace/events/power.h>
#include "cpuidle.h"
int cpuidle_idle_call(void)
{
struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices);
+ struct cpuidle_driver *drv = cpuidle_get_driver();
struct cpuidle_state *target_state;
- int next_state;
+ int next_state, entered_state;
if (off)
return -ENODEV;
hrtimer_peek_ahead_timers();
#endif
- /*
- * Call the device's prepare function before calling the
- * governor's select function. ->prepare gives the device's
- * cpuidle driver a chance to update any dynamic information
- * of its cpuidle states for the current idle period, e.g.
- * state availability, latencies, residencies, etc.
- */
- if (dev->prepare)
- dev->prepare(dev);
-
/* ask the governor for the next state */
- next_state = cpuidle_curr_governor->select(dev);
+ next_state = cpuidle_curr_governor->select(drv, dev);
if (need_resched()) {
local_irq_enable();
return 0;
}
- target_state = &dev->states[next_state];
-
- /* enter the state and update stats */
- dev->last_state = target_state;
+ target_state = &drv->states[next_state];
trace_power_start(POWER_CSTATE, next_state, dev->cpu);
trace_cpu_idle(next_state, dev->cpu);
- dev->last_residency = target_state->enter(dev, target_state);
+ entered_state = target_state->enter(dev, drv, next_state);
trace_power_end(dev->cpu);
trace_cpu_idle(PWR_EVENT_EXIT, dev->cpu);
- if (dev->last_state)
- target_state = dev->last_state;
-
- target_state->time += (unsigned long long)dev->last_residency;
- target_state->usage++;
+ if (entered_state >= 0) {
+ /* Update cpuidle counters */
+ /* This can be moved to within driver enter routine
+ * but that results in multiple copies of same code.
+ */
+ dev->states_usage[entered_state].time +=
+ (unsigned long long)dev->last_residency;
+ dev->states_usage[entered_state].usage++;
+ }
/* give the governor an opportunity to reflect on the outcome */
if (cpuidle_curr_governor->reflect)
- cpuidle_curr_governor->reflect(dev);
+ cpuidle_curr_governor->reflect(dev, entered_state);
return 0;
}
EXPORT_SYMBOL_GPL(cpuidle_resume_and_unlock);
#ifdef CONFIG_ARCH_HAS_CPU_RELAX
-static int poll_idle(struct cpuidle_device *dev, struct cpuidle_state *st)
+static int poll_idle(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv, int index)
{
ktime_t t1, t2;
s64 diff;
- int ret;
t1 = ktime_get();
local_irq_enable();
if (diff > INT_MAX)
diff = INT_MAX;
- ret = (int) diff;
- return ret;
+ dev->last_residency = (int) diff;
+
+ return index;
}
-static void poll_idle_init(struct cpuidle_device *dev)
+static void poll_idle_init(struct cpuidle_driver *drv)
{
- struct cpuidle_state *state = &dev->states[0];
-
- cpuidle_set_statedata(state, NULL);
+ struct cpuidle_state *state = &drv->states[0];
snprintf(state->name, CPUIDLE_NAME_LEN, "POLL");
snprintf(state->desc, CPUIDLE_DESC_LEN, "CPUIDLE CORE POLL IDLE");
state->enter = poll_idle;
}
#else
-static void poll_idle_init(struct cpuidle_device *dev) {}
+static void poll_idle_init(struct cpuidle_driver *drv) {}
#endif /* CONFIG_ARCH_HAS_CPU_RELAX */
/**
return ret;
}
- poll_idle_init(dev);
+ poll_idle_init(cpuidle_get_driver());
if ((ret = cpuidle_add_state_sysfs(dev)))
return ret;
if (cpuidle_curr_governor->enable &&
- (ret = cpuidle_curr_governor->enable(dev)))
+ (ret = cpuidle_curr_governor->enable(cpuidle_get_driver(), dev)))
goto fail_sysfs;
for (i = 0; i < dev->state_count; i++) {
- dev->states[i].usage = 0;
- dev->states[i].time = 0;
+ dev->states_usage[i].usage = 0;
+ dev->states_usage[i].time = 0;
}
dev->last_residency = 0;
- dev->last_state = NULL;
smp_wmb();
dev->enabled = 0;
if (cpuidle_curr_governor->disable)
- cpuidle_curr_governor->disable(dev);
+ cpuidle_curr_governor->disable(cpuidle_get_driver(), dev);
cpuidle_remove_state_sysfs(dev);
enabled_devices--;
init_completion(&dev->kobj_unregister);
- /*
- * cpuidle driver should set the dev->power_specified bit
- * before registering the device if the driver provides
- * power_usage numbers.
- *
- * For those devices whose ->power_specified is not set,
- * we fill in power_usage with decreasing values as the
- * cpuidle code has an implicit assumption that state Cn
- * uses less power than C(n-1).
- *
- * With CONFIG_ARCH_HAS_CPU_RELAX, C0 is already assigned
- * an power value of -1. So we use -2, -3, etc, for other
- * c-states.
- */
- if (!dev->power_specified) {
- int i;
- for (i = CPUIDLE_DRIVER_STATE_START; i < dev->state_count; i++)
- dev->states[i].power_usage = -1 - i;
- }
-
per_cpu(cpuidle_devices, dev->cpu) = dev;
list_add(&dev->device_list, &cpuidle_detected_devices);
if ((ret = cpuidle_add_sysfs(sys_dev))) {
static struct cpuidle_driver *cpuidle_curr_driver;
DEFINE_SPINLOCK(cpuidle_driver_lock);
+static void __cpuidle_register_driver(struct cpuidle_driver *drv)
+{
+ int i;
+ /*
+ * cpuidle driver should set the drv->power_specified bit
+ * before registering if the driver provides
+ * power_usage numbers.
+ *
+ * If power_specified is not set,
+ * we fill in power_usage with decreasing values as the
+ * cpuidle code has an implicit assumption that state Cn
+ * uses less power than C(n-1).
+ *
+ * With CONFIG_ARCH_HAS_CPU_RELAX, C0 is already assigned
+ * an power value of -1. So we use -2, -3, etc, for other
+ * c-states.
+ */
+ if (!drv->power_specified) {
+ for (i = CPUIDLE_DRIVER_STATE_START; i < drv->state_count; i++)
+ drv->states[i].power_usage = -1 - i;
+ }
+}
+
+
/**
* cpuidle_register_driver - registers a driver
* @drv: the driver
spin_unlock(&cpuidle_driver_lock);
return -EBUSY;
}
+ __cpuidle_register_driver(drv);
cpuidle_curr_driver = drv;
spin_unlock(&cpuidle_driver_lock);
#include <linux/kernel.h>
#include <linux/cpuidle.h>
#include <linux/pm_qos.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/jiffies.h>
#include <asm/io.h>
/**
* ladder_select_state - selects the next state to enter
+ * @drv: cpuidle driver
* @dev: the CPU
*/
-static int ladder_select_state(struct cpuidle_device *dev)
+static int ladder_select_state(struct cpuidle_driver *drv,
+ struct cpuidle_device *dev)
{
struct ladder_device *ldev = &__get_cpu_var(ladder_devices);
struct ladder_device_state *last_state;
last_state = &ldev->states[last_idx];
- if (dev->states[last_idx].flags & CPUIDLE_FLAG_TIME_VALID)
- last_residency = cpuidle_get_last_residency(dev) - dev->states[last_idx].exit_latency;
+ if (drv->states[last_idx].flags & CPUIDLE_FLAG_TIME_VALID) {
+ last_residency = cpuidle_get_last_residency(dev) - \
+ drv->states[last_idx].exit_latency;
+ }
else
last_residency = last_state->threshold.promotion_time + 1;
/* consider promotion */
- if (last_idx < dev->state_count - 1 &&
+ if (last_idx < drv->state_count - 1 &&
last_residency > last_state->threshold.promotion_time &&
- dev->states[last_idx + 1].exit_latency <= latency_req) {
+ drv->states[last_idx + 1].exit_latency <= latency_req) {
last_state->stats.promotion_count++;
last_state->stats.demotion_count = 0;
if (last_state->stats.promotion_count >= last_state->threshold.promotion_count) {
/* consider demotion */
if (last_idx > CPUIDLE_DRIVER_STATE_START &&
- dev->states[last_idx].exit_latency > latency_req) {
+ drv->states[last_idx].exit_latency > latency_req) {
int i;
for (i = last_idx - 1; i > CPUIDLE_DRIVER_STATE_START; i--) {
- if (dev->states[i].exit_latency <= latency_req)
+ if (drv->states[i].exit_latency <= latency_req)
break;
}
ladder_do_selection(ldev, last_idx, i);
/**
* ladder_enable_device - setup for the governor
+ * @drv: cpuidle driver
* @dev: the CPU
*/
-static int ladder_enable_device(struct cpuidle_device *dev)
+static int ladder_enable_device(struct cpuidle_driver *drv,
+ struct cpuidle_device *dev)
{
int i;
struct ladder_device *ldev = &per_cpu(ladder_devices, dev->cpu);
ldev->last_state_idx = CPUIDLE_DRIVER_STATE_START;
- for (i = 0; i < dev->state_count; i++) {
- state = &dev->states[i];
+ for (i = 0; i < drv->state_count; i++) {
+ state = &drv->states[i];
lstate = &ldev->states[i];
lstate->stats.promotion_count = 0;
lstate->threshold.promotion_count = PROMOTION_COUNT;
lstate->threshold.demotion_count = DEMOTION_COUNT;
- if (i < dev->state_count - 1)
+ if (i < drv->state_count - 1)
lstate->threshold.promotion_time = state->exit_latency;
if (i > 0)
lstate->threshold.demotion_time = state->exit_latency;
return 0;
}
+/**
+ * ladder_reflect - update the correct last_state_idx
+ * @dev: the CPU
+ * @index: the index of actual state entered
+ */
+static void ladder_reflect(struct cpuidle_device *dev, int index)
+{
+ struct ladder_device *ldev = &__get_cpu_var(ladder_devices);
+ if (index > 0)
+ ldev->last_state_idx = index;
+}
+
static struct cpuidle_governor ladder_governor = {
.name = "ladder",
.rating = 10,
.enable = ladder_enable_device,
.select = ladder_select_state,
+ .reflect = ladder_reflect,
.owner = THIS_MODULE,
};
#include <linux/tick.h>
#include <linux/sched.h>
#include <linux/math64.h>
+#include <linux/module.h>
#define BUCKETS 12
#define INTERVALS 8
static DEFINE_PER_CPU(struct menu_device, menu_devices);
-static void menu_update(struct cpuidle_device *dev);
+static void menu_update(struct cpuidle_driver *drv, struct cpuidle_device *dev);
/* This implements DIV_ROUND_CLOSEST but avoids 64 bit division */
static u64 div_round64(u64 dividend, u32 divisor)
/**
* menu_select - selects the next idle state to enter
+ * @drv: cpuidle driver containing state data
* @dev: the CPU
*/
-static int menu_select(struct cpuidle_device *dev)
+static int menu_select(struct cpuidle_driver *drv, struct cpuidle_device *dev)
{
struct menu_device *data = &__get_cpu_var(menu_devices);
int latency_req = pm_qos_request(PM_QOS_CPU_DMA_LATENCY);
struct timespec t;
if (data->needs_update) {
- menu_update(dev);
+ menu_update(drv, dev);
data->needs_update = 0;
}
* Find the idle state with the lowest power while satisfying
* our constraints.
*/
- for (i = CPUIDLE_DRIVER_STATE_START; i < dev->state_count; i++) {
- struct cpuidle_state *s = &dev->states[i];
+ for (i = CPUIDLE_DRIVER_STATE_START; i < drv->state_count; i++) {
+ struct cpuidle_state *s = &drv->states[i];
- if (s->flags & CPUIDLE_FLAG_IGNORE)
- continue;
if (s->target_residency > data->predicted_us)
continue;
if (s->exit_latency > latency_req)
/**
* menu_reflect - records that data structures need update
* @dev: the CPU
+ * @index: the index of actual entered state
*
* NOTE: it's important to be fast here because this operation will add to
* the overall exit latency.
*/
-static void menu_reflect(struct cpuidle_device *dev)
+static void menu_reflect(struct cpuidle_device *dev, int index)
{
struct menu_device *data = &__get_cpu_var(menu_devices);
- data->needs_update = 1;
+ data->last_state_idx = index;
+ if (index >= 0)
+ data->needs_update = 1;
}
/**
* menu_update - attempts to guess what happened after entry
+ * @drv: cpuidle driver containing state data
* @dev: the CPU
*/
-static void menu_update(struct cpuidle_device *dev)
+static void menu_update(struct cpuidle_driver *drv, struct cpuidle_device *dev)
{
struct menu_device *data = &__get_cpu_var(menu_devices);
int last_idx = data->last_state_idx;
unsigned int last_idle_us = cpuidle_get_last_residency(dev);
- struct cpuidle_state *target = &dev->states[last_idx];
+ struct cpuidle_state *target = &drv->states[last_idx];
unsigned int measured_us;
u64 new_factor;
/**
* menu_enable_device - scans a CPU's states and does setup
+ * @drv: cpuidle driver
* @dev: the CPU
*/
-static int menu_enable_device(struct cpuidle_device *dev)
+static int menu_enable_device(struct cpuidle_driver *drv,
+ struct cpuidle_device *dev)
{
struct menu_device *data = &per_cpu(menu_devices, dev->cpu);
struct cpuidle_state_attr {
struct attribute attr;
- ssize_t (*show)(struct cpuidle_state *, char *);
+ ssize_t (*show)(struct cpuidle_state *, \
+ struct cpuidle_state_usage *, char *);
ssize_t (*store)(struct cpuidle_state *, const char *, size_t);
};
static struct cpuidle_state_attr attr_##_name = __ATTR(_name, 0444, show, NULL)
#define define_show_state_function(_name) \
-static ssize_t show_state_##_name(struct cpuidle_state *state, char *buf) \
+static ssize_t show_state_##_name(struct cpuidle_state *state, \
+ struct cpuidle_state_usage *state_usage, char *buf) \
{ \
return sprintf(buf, "%u\n", state->_name);\
}
#define define_show_state_ull_function(_name) \
-static ssize_t show_state_##_name(struct cpuidle_state *state, char *buf) \
+static ssize_t show_state_##_name(struct cpuidle_state *state, \
+ struct cpuidle_state_usage *state_usage, char *buf) \
{ \
- return sprintf(buf, "%llu\n", state->_name);\
+ return sprintf(buf, "%llu\n", state_usage->_name);\
}
#define define_show_state_str_function(_name) \
-static ssize_t show_state_##_name(struct cpuidle_state *state, char *buf) \
+static ssize_t show_state_##_name(struct cpuidle_state *state, \
+ struct cpuidle_state_usage *state_usage, char *buf) \
{ \
if (state->_name[0] == '\0')\
return sprintf(buf, "<null>\n");\
#define kobj_to_state_obj(k) container_of(k, struct cpuidle_state_kobj, kobj)
#define kobj_to_state(k) (kobj_to_state_obj(k)->state)
+#define kobj_to_state_usage(k) (kobj_to_state_obj(k)->state_usage)
#define attr_to_stateattr(a) container_of(a, struct cpuidle_state_attr, attr)
static ssize_t cpuidle_state_show(struct kobject * kobj,
struct attribute * attr ,char * buf)
{
int ret = -EIO;
struct cpuidle_state *state = kobj_to_state(kobj);
+ struct cpuidle_state_usage *state_usage = kobj_to_state_usage(kobj);
struct cpuidle_state_attr * cattr = attr_to_stateattr(attr);
if (cattr->show)
- ret = cattr->show(state, buf);
+ ret = cattr->show(state, state_usage, buf);
return ret;
}
{
int i, ret = -ENOMEM;
struct cpuidle_state_kobj *kobj;
+ struct cpuidle_driver *drv = cpuidle_get_driver();
/* state statistics */
for (i = 0; i < device->state_count; i++) {
kobj = kzalloc(sizeof(struct cpuidle_state_kobj), GFP_KERNEL);
if (!kobj)
goto error_state;
- kobj->state = &device->states[i];
+ kobj->state = &drv->states[i];
+ kobj->state_usage = &device->states_usage[i];
init_completion(&kobj->kobj_unregister);
ret = kobject_init_and_add(&kobj->kobj, &ktype_state_cpuidle, &device->kobj,
#include <linux/platform_device.h>
#include <linux/scatterlist.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <crypto/internal/hash.h>
#include <crypto/sha.h>
#include <linux/device.h>
#include <linux/dca.h>
#include <linux/slab.h>
+#include <linux/module.h>
#define DCA_VERSION "1.12.1"
#include <linux/err.h>
#include <linux/dca.h>
#include <linux/gfp.h>
+#include <linux/export.h>
static struct class *dca_class;
static struct idr dca_idr;
-config ARCH_HAS_DEVFREQ
- bool
- depends on ARCH_HAS_OPP
- help
- Denotes that the architecture supports DEVFREQ. If the architecture
- supports multiple OPP entries per device and the frequency of the
- devices with OPPs may be altered dynamically, the architecture
- supports DEVFREQ.
-
menuconfig PM_DEVFREQ
bool "Generic Dynamic Voltage and Frequency Scaling (DVFS) support"
- depends on PM_OPP && ARCH_HAS_DEVFREQ
help
- With OPP support, a device may have a list of frequencies and
- voltages available. DEVFREQ, a generic DVFS framework can be
- registered for a device with OPP support in order to let the
- governor provided to DEVFREQ choose an operating frequency
- based on the OPP's list and the policy given with DEVFREQ.
+ A device may have a list of frequencies and voltages available.
+ devfreq, a generic DVFS framework can be registered for a device
+ in order to let the governor provided to devfreq choose an
+ operating frequency based on the device driver's policy.
- Each device may have its own governor and policy. DEVFREQ can
+ Each device may have its own governor and policy. Devfreq can
reevaluate the device state periodically and/or based on the
- OPP list changes (each frequency/voltage pair in OPP may be
- disabled or enabled).
+ notification to "nb", a notifier block, of devfreq.
- Like some CPUs with CPUFREQ, a device may have multiple clocks.
+ Like some CPUs with CPUfreq, a device may have multiple clocks.
However, because the clock frequencies of a single device are
- determined by the single device's state, an instance of DEVFREQ
+ determined by the single device's state, an instance of devfreq
is attached to a single device and returns a "representative"
- clock frequency from the OPP of the device, which is also attached
- to a device by 1-to-1. The device registering DEVFREQ takes the
- responsiblity to "interpret" the frequency listed in OPP and
+ clock frequency of the device, which is also attached
+ to a device by 1-to-1. The device registering devfreq takes the
+ responsiblity to "interpret" the representative frequency and
to set its every clock accordingly with the "target" callback
- given to DEVFREQ.
+ given to devfreq.
+
+ When OPP is used with the devfreq device, it is recommended to
+ register devfreq's nb to the OPP's notifier head. If OPP is
+ used with the devfreq device, you may use OPP helper
+ functions defined in devfreq.h.
if PM_DEVFREQ
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/init.h>
+#include <linux/module.h>
#include <linux/slab.h>
+#include <linux/stat.h>
#include <linux/opp.h>
#include <linux/devfreq.h>
#include <linux/workqueue.h>
*/
int devfreq_remove_device(struct devfreq *devfreq)
{
+ bool central_polling;
+
if (!devfreq)
return -EINVAL;
- if (!devfreq->governor->no_central_polling) {
+ central_polling = !devfreq->governor->no_central_polling;
+
+ if (central_polling) {
mutex_lock(&devfreq_list_lock);
while (wait_remove_device == devfreq) {
mutex_unlock(&devfreq_list_lock);
mutex_lock(&devfreq->lock);
_remove_devfreq(devfreq, false); /* it unlocks devfreq->lock */
- if (!devfreq->governor->no_central_polling)
+ if (central_polling)
mutex_unlock(&devfreq_list_lock);
return 0;
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/dmaengine.h>
+#include <linux/module.h>
#include <asm/irq.h>
#include <mach/dma-v1.h>
#include <linux/dmaengine.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/module.h>
#include <asm/irq.h>
#include <mach/sdma.h>
#include <linux/interrupt.h>
#include <linux/pm_runtime.h>
#include <linux/intel_mid_dma.h>
+#include <linux/module.h>
#define MAX_CHAN 4 /*max ch across controllers*/
#include "intel_mid_dma_regs.h"
#include <linux/string.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/module.h>
#include <mach/ipu.h>
#include <linux/dma-mapping.h>
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <linux/dmaengine.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
ECC_MASK_ENABLE = (APIMASK_ECC_UE_H | APIMASK_ECC_CE_H |
APIMASK_ECC_UE_L | APIMASK_ECC_CE_L),
};
+#define APIMASK_ADI(n) CPC925_BIT(((n)+1))
/************************************************************
* Processor Interface Exception Register (APIEXCP)
}
/******************** CPU err device********************************/
+static u32 cpc925_cpu_mask_disabled(void)
+{
+ struct device_node *cpus;
+ struct device_node *cpunode = NULL;
+ static u32 mask = 0;
+
+ /* use cached value if available */
+ if (mask != 0)
+ return mask;
+
+ mask = APIMASK_ADI0 | APIMASK_ADI1;
+
+ cpus = of_find_node_by_path("/cpus");
+ if (cpus == NULL) {
+ cpc925_printk(KERN_DEBUG, "No /cpus node !\n");
+ return 0;
+ }
+
+ while ((cpunode = of_get_next_child(cpus, cpunode)) != NULL) {
+ const u32 *reg = of_get_property(cpunode, "reg", NULL);
+
+ if (strcmp(cpunode->type, "cpu")) {
+ cpc925_printk(KERN_ERR, "Not a cpu node in /cpus: %s\n", cpunode->name);
+ continue;
+ }
+
+ if (reg == NULL || *reg > 2) {
+ cpc925_printk(KERN_ERR, "Bad reg value at %s\n", cpunode->full_name);
+ continue;
+ }
+
+ mask &= ~APIMASK_ADI(*reg);
+ }
+
+ if (mask != (APIMASK_ADI0 | APIMASK_ADI1)) {
+ /* We assume that each CPU sits on it's own PI and that
+ * for present CPUs the reg property equals to the PI
+ * interface id */
+ cpc925_printk(KERN_WARNING,
+ "Assuming PI id is equal to CPU MPIC id!\n");
+ }
+
+ of_node_put(cpunode);
+ of_node_put(cpus);
+
+ return mask;
+}
+
/* Enable CPU Errors detection */
static void cpc925_cpu_init(struct cpc925_dev_info *dev_info)
{
u32 apimask;
+ u32 cpumask;
apimask = __raw_readl(dev_info->vbase + REG_APIMASK_OFFSET);
- if ((apimask & CPU_MASK_ENABLE) == 0) {
- apimask |= CPU_MASK_ENABLE;
- __raw_writel(apimask, dev_info->vbase + REG_APIMASK_OFFSET);
+
+ cpumask = cpc925_cpu_mask_disabled();
+ if (apimask & cpumask) {
+ cpc925_printk(KERN_WARNING, "CPU(s) not present, "
+ "but enabled in APIMASK, disabling\n");
+ apimask &= ~cpumask;
}
+
+ if ((apimask & CPU_MASK_ENABLE) == 0)
+ apimask |= CPU_MASK_ENABLE;
+
+ __raw_writel(apimask, dev_info->vbase + REG_APIMASK_OFFSET);
}
/* Disable CPU Errors detection */
if ((apiexcp & CPU_EXCP_DETECTED) == 0)
return;
+ if ((apiexcp & ~cpc925_cpu_mask_disabled()) == 0)
+ return;
+
apimask = __raw_readl(dev_info->vbase + REG_APIMASK_OFFSET);
cpc925_printk(KERN_INFO, "Processor Interface Fault\n"
"Processor Interface register dump:\n");
#include <linux/kobject.h>
#include <linux/sysdev.h>
#include <linux/edac.h>
+#include <linux/module.h>
#include <asm/mce.h>
#include "mce_amd.h"
.remove = ppc4xx_edac_remove,
.driver = {
.owner = THIS_MODULE,
- .name = PPC4XX_EDAC_MODULE_NAME
+ .name = PPC4XX_EDAC_MODULE_NAME,
.of_match_table = ppc4xx_edac_match,
},
};
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/vmalloc.h>
+#include <linux/export.h>
#include <asm/byteorder.h>
}
/**
- * dmi_name_in_vendors - Check if string is anywhere in the DMI vendor information.
+ * dmi_name_in_vendors - Check if string is in the DMI system or board vendor name
* @str: Case sensitive Name
*/
int dmi_name_in_vendors(const char *str)
{
- static int fields[] = { DMI_BIOS_VENDOR, DMI_BIOS_VERSION, DMI_SYS_VENDOR,
- DMI_PRODUCT_NAME, DMI_PRODUCT_VERSION, DMI_BOARD_VENDOR,
- DMI_BOARD_NAME, DMI_BOARD_VERSION, DMI_NONE };
+ static int fields[] = { DMI_SYS_VENDOR, DMI_BOARD_VENDOR, DMI_NONE };
int i;
for (i = 0; fields[i] != DMI_NONE; i++) {
int f = fields[i];
p += scnprintf(p, left, "\tbase_address: %x\n",
info->params.interface_path.isa.base_address);
} else if (!strncmp(info->params.host_bus_type, "PCIX", 4) ||
- !strncmp(info->params.host_bus_type, "PCI", 3)) {
+ !strncmp(info->params.host_bus_type, "PCI", 3) ||
+ !strncmp(info->params.host_bus_type, "XPRS", 4)) {
p += scnprintf(p, left,
"\t%02x:%02x.%d channel: %u\n",
info->params.interface_path.pci.bus,
info->params.interface_path.pci.function,
info->params.interface_path.pci.channel);
} else if (!strncmp(info->params.host_bus_type, "IBND", 4) ||
- !strncmp(info->params.host_bus_type, "XPRS", 4) ||
!strncmp(info->params.host_bus_type, "HTPT", 4)) {
p += scnprintf(p, left,
"\tTBD: %llx\n",
{
struct edd_info *info = edd_dev_get_info(edev);
- if (edd_dev_is_type(edev, "PCI")) {
+ if (edd_dev_is_type(edev, "PCI") || edd_dev_is_type(edev, "XPRS")) {
return pci_get_bus_and_slot(info->params.interface_path.pci.bus,
PCI_DEVFN(info->params.interface_path.pci.slot,
info->params.interface_path.pci.
#include <linux/kdebug.h>
#include <linux/reboot.h>
#include <linux/efi.h>
+#include <linux/module.h>
#define GSMI_SHUTDOWN_CLEAN 0 /* Clean Shutdown */
/* TODO(mikew@google.com): Tie in HARDLOCKUP_DETECTOR with NMIWDT */
depends on ARCH_EP93XX
select GPIO_GENERIC
-config GPIO_EXYNOS4
- def_bool y
- depends on CPU_EXYNOS4210
-
config GPIO_MPC5200
def_bool y
depends on PPC_MPC52xx
+config GPIO_MPC8XXX
+ bool "MPC512x/MPC8xxx GPIO support"
+ depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \
+ FSL_SOC_BOOKE || PPC_86xx
+ help
+ Say Y here if you're going to use hardware that connects to the
+ MPC512x/831x/834x/837x/8572/8610 GPIOs.
+
config GPIO_MSM_V1
tristate "Qualcomm MSM GPIO v1"
depends on GPIOLIB && ARCH_MSM
select GPIO_GENERIC
select GENERIC_IRQ_CHIP
-config GPIO_PLAT_SAMSUNG
- def_bool y
- depends on SAMSUNG_GPIOLIB_4BIT
-
-config GPIO_S5PC100
- def_bool y
- depends on CPU_S5PC100
-
-config GPIO_S5PV210
- def_bool y
- depends on CPU_S5PV210
-
config GPIO_PL061
bool "PrimeCell PL061 GPIO support"
depends on ARM_AMBA
obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o
obj-$(CONFIG_ARCH_DAVINCI) += gpio-davinci.o
obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
-obj-$(CONFIG_GPIO_EXYNOS4) += gpio-exynos4.o
obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o
obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
obj-$(CONFIG_MACH_KS8695) += gpio-ks8695.o
obj-$(CONFIG_GPIO_MCP23S08) += gpio-mcp23s08.o
obj-$(CONFIG_GPIO_ML_IOH) += gpio-ml-ioh.o
obj-$(CONFIG_GPIO_MPC5200) += gpio-mpc5200.o
+obj-$(CONFIG_GPIO_MPC8XXX) += gpio-mpc8xxx.o
obj-$(CONFIG_GPIO_MSM_V1) += gpio-msm-v1.o
obj-$(CONFIG_GPIO_MSM_V2) += gpio-msm-v2.o
obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
obj-$(CONFIG_PLAT_PXA) += gpio-pxa.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
-
-obj-$(CONFIG_GPIO_PLAT_SAMSUNG) += gpio-plat-samsung.o
-obj-$(CONFIG_GPIO_S5PC100) += gpio-s5pc100.o
-obj-$(CONFIG_GPIO_S5PV210) += gpio-s5pv210.o
+obj-$(CONFIG_PLAT_SAMSUNG) += gpio-samsung.o
obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
obj-$(CONFIG_GPIO_SCH) += gpio-sch.o
obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o
#include <linux/spi/74x164.h>
#include <linux/gpio.h>
#include <linux/slab.h>
+#include <linux/module.h>
struct gen_74x164_chip {
struct spi_device *spi;
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/init.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/gpio.h>
+++ /dev/null
-/*
- * EXYNOS4 - GPIOlib support
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-int s3c_gpio_setpull_exynos4(struct s3c_gpio_chip *chip,
- unsigned int off, s3c_gpio_pull_t pull)
-{
- if (pull == S3C_GPIO_PULL_UP)
- pull = 3;
-
- return s3c_gpio_setpull_updown(chip, off, pull);
-}
-
-s3c_gpio_pull_t s3c_gpio_getpull_exynos4(struct s3c_gpio_chip *chip,
- unsigned int off)
-{
- s3c_gpio_pull_t pull;
-
- pull = s3c_gpio_getpull_updown(chip, off);
- if (pull == 3)
- pull = S3C_GPIO_PULL_UP;
-
- return pull;
-}
-
-static struct s3c_gpio_cfg gpio_cfg = {
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_exynos4,
- .get_pull = s3c_gpio_getpull_exynos4,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_noint = {
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_exynos4,
- .get_pull = s3c_gpio_getpull_exynos4,
-};
-
-/*
- * Following are the gpio banks in v310.
- *
- * The 'config' member when left to NULL, is initialized to the default
- * structure gpio_cfg in the init function below.
- *
- * The 'base' member is also initialized in the init function below.
- * Note: The initialization of 'base' member of s3c_gpio_chip structure
- * uses the above macro and depends on the banks being listed in order here.
- */
-static struct s3c_gpio_chip exynos4_gpio_part1_4bit[] = {
- {
- .chip = {
- .base = EXYNOS4_GPA0(0),
- .ngpio = EXYNOS4_GPIO_A0_NR,
- .label = "GPA0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPA1(0),
- .ngpio = EXYNOS4_GPIO_A1_NR,
- .label = "GPA1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPB(0),
- .ngpio = EXYNOS4_GPIO_B_NR,
- .label = "GPB",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPC0(0),
- .ngpio = EXYNOS4_GPIO_C0_NR,
- .label = "GPC0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPC1(0),
- .ngpio = EXYNOS4_GPIO_C1_NR,
- .label = "GPC1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPD0(0),
- .ngpio = EXYNOS4_GPIO_D0_NR,
- .label = "GPD0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPD1(0),
- .ngpio = EXYNOS4_GPIO_D1_NR,
- .label = "GPD1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPE0(0),
- .ngpio = EXYNOS4_GPIO_E0_NR,
- .label = "GPE0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPE1(0),
- .ngpio = EXYNOS4_GPIO_E1_NR,
- .label = "GPE1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPE2(0),
- .ngpio = EXYNOS4_GPIO_E2_NR,
- .label = "GPE2",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPE3(0),
- .ngpio = EXYNOS4_GPIO_E3_NR,
- .label = "GPE3",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPE4(0),
- .ngpio = EXYNOS4_GPIO_E4_NR,
- .label = "GPE4",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPF0(0),
- .ngpio = EXYNOS4_GPIO_F0_NR,
- .label = "GPF0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPF1(0),
- .ngpio = EXYNOS4_GPIO_F1_NR,
- .label = "GPF1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPF2(0),
- .ngpio = EXYNOS4_GPIO_F2_NR,
- .label = "GPF2",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPF3(0),
- .ngpio = EXYNOS4_GPIO_F3_NR,
- .label = "GPF3",
- },
- },
-};
-
-static struct s3c_gpio_chip exynos4_gpio_part2_4bit[] = {
- {
- .chip = {
- .base = EXYNOS4_GPJ0(0),
- .ngpio = EXYNOS4_GPIO_J0_NR,
- .label = "GPJ0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPJ1(0),
- .ngpio = EXYNOS4_GPIO_J1_NR,
- .label = "GPJ1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPK0(0),
- .ngpio = EXYNOS4_GPIO_K0_NR,
- .label = "GPK0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPK1(0),
- .ngpio = EXYNOS4_GPIO_K1_NR,
- .label = "GPK1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPK2(0),
- .ngpio = EXYNOS4_GPIO_K2_NR,
- .label = "GPK2",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPK3(0),
- .ngpio = EXYNOS4_GPIO_K3_NR,
- .label = "GPK3",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPL0(0),
- .ngpio = EXYNOS4_GPIO_L0_NR,
- .label = "GPL0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPL1(0),
- .ngpio = EXYNOS4_GPIO_L1_NR,
- .label = "GPL1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPL2(0),
- .ngpio = EXYNOS4_GPIO_L2_NR,
- .label = "GPL2",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY0(0),
- .ngpio = EXYNOS4_GPIO_Y0_NR,
- .label = "GPY0",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY1(0),
- .ngpio = EXYNOS4_GPIO_Y1_NR,
- .label = "GPY1",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY2(0),
- .ngpio = EXYNOS4_GPIO_Y2_NR,
- .label = "GPY2",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY3(0),
- .ngpio = EXYNOS4_GPIO_Y3_NR,
- .label = "GPY3",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY4(0),
- .ngpio = EXYNOS4_GPIO_Y4_NR,
- .label = "GPY4",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY5(0),
- .ngpio = EXYNOS4_GPIO_Y5_NR,
- .label = "GPY5",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY6(0),
- .ngpio = EXYNOS4_GPIO_Y6_NR,
- .label = "GPY6",
- },
- }, {
- .base = (S5P_VA_GPIO2 + 0xC00),
- .config = &gpio_cfg_noint,
- .irq_base = IRQ_EINT(0),
- .chip = {
- .base = EXYNOS4_GPX0(0),
- .ngpio = EXYNOS4_GPIO_X0_NR,
- .label = "GPX0",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO2 + 0xC20),
- .config = &gpio_cfg_noint,
- .irq_base = IRQ_EINT(8),
- .chip = {
- .base = EXYNOS4_GPX1(0),
- .ngpio = EXYNOS4_GPIO_X1_NR,
- .label = "GPX1",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO2 + 0xC40),
- .config = &gpio_cfg_noint,
- .irq_base = IRQ_EINT(16),
- .chip = {
- .base = EXYNOS4_GPX2(0),
- .ngpio = EXYNOS4_GPIO_X2_NR,
- .label = "GPX2",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO2 + 0xC60),
- .config = &gpio_cfg_noint,
- .irq_base = IRQ_EINT(24),
- .chip = {
- .base = EXYNOS4_GPX3(0),
- .ngpio = EXYNOS4_GPIO_X3_NR,
- .label = "GPX3",
- .to_irq = samsung_gpiolib_to_irq,
- },
- },
-};
-
-static struct s3c_gpio_chip exynos4_gpio_part3_4bit[] = {
- {
- .chip = {
- .base = EXYNOS4_GPZ(0),
- .ngpio = EXYNOS4_GPIO_Z_NR,
- .label = "GPZ",
- },
- },
-};
-
-static __init int exynos4_gpiolib_init(void)
-{
- struct s3c_gpio_chip *chip;
- int i;
- int group = 0;
- int nr_chips;
-
- /* GPIO part 1 */
-
- chip = exynos4_gpio_part1_4bit;
- nr_chips = ARRAY_SIZE(exynos4_gpio_part1_4bit);
-
- for (i = 0; i < nr_chips; i++, chip++) {
- if (chip->config == NULL) {
- chip->config = &gpio_cfg;
- /* Assign the GPIO interrupt group */
- chip->group = group++;
- }
- if (chip->base == NULL)
- chip->base = S5P_VA_GPIO1 + (i) * 0x20;
- }
-
- samsung_gpiolib_add_4bit_chips(exynos4_gpio_part1_4bit, nr_chips);
-
- /* GPIO part 2 */
-
- chip = exynos4_gpio_part2_4bit;
- nr_chips = ARRAY_SIZE(exynos4_gpio_part2_4bit);
-
- for (i = 0; i < nr_chips; i++, chip++) {
- if (chip->config == NULL) {
- chip->config = &gpio_cfg;
- /* Assign the GPIO interrupt group */
- chip->group = group++;
- }
- if (chip->base == NULL)
- chip->base = S5P_VA_GPIO2 + (i) * 0x20;
- }
-
- samsung_gpiolib_add_4bit_chips(exynos4_gpio_part2_4bit, nr_chips);
-
- /* GPIO part 3 */
-
- chip = exynos4_gpio_part3_4bit;
- nr_chips = ARRAY_SIZE(exynos4_gpio_part3_4bit);
-
- for (i = 0; i < nr_chips; i++, chip++) {
- if (chip->config == NULL) {
- chip->config = &gpio_cfg;
- /* Assign the GPIO interrupt group */
- chip->group = group++;
- }
- if (chip->base == NULL)
- chip->base = S5P_VA_GPIO3 + (i) * 0x20;
- }
-
- samsung_gpiolib_add_4bit_chips(exynos4_gpio_part3_4bit, nr_chips);
- s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS);
- s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS);
-
- return 0;
-}
-core_initcall(exynos4_gpiolib_init);
#include <linux/spi/mc33880.h>
#include <linux/gpio.h>
#include <linux/slab.h>
+#include <linux/module.h>
#define DRIVER_NAME "mc33880"
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/mutex.h>
+#include <linux/module.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/spi/spi.h>
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
*/
+#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/of_gpio.h>
#include <linux/io.h>
#include <linux/of_platform.h>
+#include <linux/module.h>
#include <asm/gpio.h>
#include <asm/mpc52xx.h>
--- /dev/null
+/*
+ * GPIOs on MPC512x/8349/8572/8610 and compatible
+ *
+ * Copyright (C) 2008 Peter Korsgaard <jacmet@sunsite.dk>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+
+#define MPC8XXX_GPIO_PINS 32
+
+#define GPIO_DIR 0x00
+#define GPIO_ODR 0x04
+#define GPIO_DAT 0x08
+#define GPIO_IER 0x0c
+#define GPIO_IMR 0x10
+#define GPIO_ICR 0x14
+#define GPIO_ICR2 0x18
+
+struct mpc8xxx_gpio_chip {
+ struct of_mm_gpio_chip mm_gc;
+ spinlock_t lock;
+
+ /*
+ * shadowed data register to be able to clear/set output pins in
+ * open drain mode safely
+ */
+ u32 data;
+ struct irq_host *irq;
+ void *of_dev_id_data;
+};
+
+static inline u32 mpc8xxx_gpio2mask(unsigned int gpio)
+{
+ return 1u << (MPC8XXX_GPIO_PINS - 1 - gpio);
+}
+
+static inline struct mpc8xxx_gpio_chip *
+to_mpc8xxx_gpio_chip(struct of_mm_gpio_chip *mm)
+{
+ return container_of(mm, struct mpc8xxx_gpio_chip, mm_gc);
+}
+
+static void mpc8xxx_gpio_save_regs(struct of_mm_gpio_chip *mm)
+{
+ struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+
+ mpc8xxx_gc->data = in_be32(mm->regs + GPIO_DAT);
+}
+
+/* Workaround GPIO 1 errata on MPC8572/MPC8536. The status of GPIOs
+ * defined as output cannot be determined by reading GPDAT register,
+ * so we use shadow data register instead. The status of input pins
+ * is determined by reading GPDAT register.
+ */
+static int mpc8572_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+ u32 val;
+ struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
+ struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+
+ val = in_be32(mm->regs + GPIO_DAT) & ~in_be32(mm->regs + GPIO_DIR);
+
+ return (val | mpc8xxx_gc->data) & mpc8xxx_gpio2mask(gpio);
+}
+
+static int mpc8xxx_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
+
+ return in_be32(mm->regs + GPIO_DAT) & mpc8xxx_gpio2mask(gpio);
+}
+
+static void mpc8xxx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
+ struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+ unsigned long flags;
+
+ spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+
+ if (val)
+ mpc8xxx_gc->data |= mpc8xxx_gpio2mask(gpio);
+ else
+ mpc8xxx_gc->data &= ~mpc8xxx_gpio2mask(gpio);
+
+ out_be32(mm->regs + GPIO_DAT, mpc8xxx_gc->data);
+
+ spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+}
+
+static int mpc8xxx_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
+ struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+ unsigned long flags;
+
+ spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+
+ clrbits32(mm->regs + GPIO_DIR, mpc8xxx_gpio2mask(gpio));
+
+ spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+
+ return 0;
+}
+
+static int mpc8xxx_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
+ struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+ unsigned long flags;
+
+ mpc8xxx_gpio_set(gc, gpio, val);
+
+ spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+
+ setbits32(mm->regs + GPIO_DIR, mpc8xxx_gpio2mask(gpio));
+
+ spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+
+ return 0;
+}
+
+static int mpc8xxx_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+ struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
+ struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+
+ if (mpc8xxx_gc->irq && offset < MPC8XXX_GPIO_PINS)
+ return irq_create_mapping(mpc8xxx_gc->irq, offset);
+ else
+ return -ENXIO;
+}
+
+static void mpc8xxx_gpio_irq_cascade(unsigned int irq, struct irq_desc *desc)
+{
+ struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_desc_get_handler_data(desc);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
+ unsigned int mask;
+
+ mask = in_be32(mm->regs + GPIO_IER) & in_be32(mm->regs + GPIO_IMR);
+ if (mask)
+ generic_handle_irq(irq_linear_revmap(mpc8xxx_gc->irq,
+ 32 - ffs(mask)));
+ chip->irq_eoi(&desc->irq_data);
+}
+
+static void mpc8xxx_irq_unmask(struct irq_data *d)
+{
+ struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d);
+ struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
+ unsigned long flags;
+
+ spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+
+ setbits32(mm->regs + GPIO_IMR, mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
+
+ spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+}
+
+static void mpc8xxx_irq_mask(struct irq_data *d)
+{
+ struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d);
+ struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
+ unsigned long flags;
+
+ spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+
+ clrbits32(mm->regs + GPIO_IMR, mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
+
+ spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+}
+
+static void mpc8xxx_irq_ack(struct irq_data *d)
+{
+ struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d);
+ struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
+
+ out_be32(mm->regs + GPIO_IER, mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
+}
+
+static int mpc8xxx_irq_set_type(struct irq_data *d, unsigned int flow_type)
+{
+ struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d);
+ struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
+ unsigned long flags;
+
+ switch (flow_type) {
+ case IRQ_TYPE_EDGE_FALLING:
+ spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+ setbits32(mm->regs + GPIO_ICR,
+ mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
+ spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+ break;
+
+ case IRQ_TYPE_EDGE_BOTH:
+ spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+ clrbits32(mm->regs + GPIO_ICR,
+ mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
+ spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int mpc512x_irq_set_type(struct irq_data *d, unsigned int flow_type)
+{
+ struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d);
+ struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
+ unsigned long gpio = irqd_to_hwirq(d);
+ void __iomem *reg;
+ unsigned int shift;
+ unsigned long flags;
+
+ if (gpio < 16) {
+ reg = mm->regs + GPIO_ICR;
+ shift = (15 - gpio) * 2;
+ } else {
+ reg = mm->regs + GPIO_ICR2;
+ shift = (15 - (gpio % 16)) * 2;
+ }
+
+ switch (flow_type) {
+ case IRQ_TYPE_EDGE_FALLING:
+ case IRQ_TYPE_LEVEL_LOW:
+ spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+ clrsetbits_be32(reg, 3 << shift, 2 << shift);
+ spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+ break;
+
+ case IRQ_TYPE_EDGE_RISING:
+ case IRQ_TYPE_LEVEL_HIGH:
+ spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+ clrsetbits_be32(reg, 3 << shift, 1 << shift);
+ spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+ break;
+
+ case IRQ_TYPE_EDGE_BOTH:
+ spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+ clrbits32(reg, 3 << shift);
+ spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct irq_chip mpc8xxx_irq_chip = {
+ .name = "mpc8xxx-gpio",
+ .irq_unmask = mpc8xxx_irq_unmask,
+ .irq_mask = mpc8xxx_irq_mask,
+ .irq_ack = mpc8xxx_irq_ack,
+ .irq_set_type = mpc8xxx_irq_set_type,
+};
+
+static int mpc8xxx_gpio_irq_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct mpc8xxx_gpio_chip *mpc8xxx_gc = h->host_data;
+
+ if (mpc8xxx_gc->of_dev_id_data)
+ mpc8xxx_irq_chip.irq_set_type = mpc8xxx_gc->of_dev_id_data;
+
+ irq_set_chip_data(virq, h->host_data);
+ irq_set_chip_and_handler(virq, &mpc8xxx_irq_chip, handle_level_irq);
+ irq_set_irq_type(virq, IRQ_TYPE_NONE);
+
+ return 0;
+}
+
+static int mpc8xxx_gpio_irq_xlate(struct irq_host *h, struct device_node *ct,
+ const u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq,
+ unsigned int *out_flags)
+
+{
+ /* interrupt sense values coming from the device tree equal either
+ * EDGE_FALLING or EDGE_BOTH
+ */
+ *out_hwirq = intspec[0];
+ *out_flags = intspec[1];
+
+ return 0;
+}
+
+static struct irq_host_ops mpc8xxx_gpio_irq_ops = {
+ .map = mpc8xxx_gpio_irq_map,
+ .xlate = mpc8xxx_gpio_irq_xlate,
+};
+
+static struct of_device_id mpc8xxx_gpio_ids[] __initdata = {
+ { .compatible = "fsl,mpc8349-gpio", },
+ { .compatible = "fsl,mpc8572-gpio", },
+ { .compatible = "fsl,mpc8610-gpio", },
+ { .compatible = "fsl,mpc5121-gpio", .data = mpc512x_irq_set_type, },
+ { .compatible = "fsl,pq3-gpio", },
+ { .compatible = "fsl,qoriq-gpio", },
+ {}
+};
+
+static void __init mpc8xxx_add_controller(struct device_node *np)
+{
+ struct mpc8xxx_gpio_chip *mpc8xxx_gc;
+ struct of_mm_gpio_chip *mm_gc;
+ struct gpio_chip *gc;
+ const struct of_device_id *id;
+ unsigned hwirq;
+ int ret;
+
+ mpc8xxx_gc = kzalloc(sizeof(*mpc8xxx_gc), GFP_KERNEL);
+ if (!mpc8xxx_gc) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ spin_lock_init(&mpc8xxx_gc->lock);
+
+ mm_gc = &mpc8xxx_gc->mm_gc;
+ gc = &mm_gc->gc;
+
+ mm_gc->save_regs = mpc8xxx_gpio_save_regs;
+ gc->ngpio = MPC8XXX_GPIO_PINS;
+ gc->direction_input = mpc8xxx_gpio_dir_in;
+ gc->direction_output = mpc8xxx_gpio_dir_out;
+ if (of_device_is_compatible(np, "fsl,mpc8572-gpio"))
+ gc->get = mpc8572_gpio_get;
+ else
+ gc->get = mpc8xxx_gpio_get;
+ gc->set = mpc8xxx_gpio_set;
+ gc->to_irq = mpc8xxx_gpio_to_irq;
+
+ ret = of_mm_gpiochip_add(np, mm_gc);
+ if (ret)
+ goto err;
+
+ hwirq = irq_of_parse_and_map(np, 0);
+ if (hwirq == NO_IRQ)
+ goto skip_irq;
+
+ mpc8xxx_gc->irq =
+ irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, MPC8XXX_GPIO_PINS,
+ &mpc8xxx_gpio_irq_ops, MPC8XXX_GPIO_PINS);
+ if (!mpc8xxx_gc->irq)
+ goto skip_irq;
+
+ id = of_match_node(mpc8xxx_gpio_ids, np);
+ if (id)
+ mpc8xxx_gc->of_dev_id_data = id->data;
+
+ mpc8xxx_gc->irq->host_data = mpc8xxx_gc;
+
+ /* ack and mask all irqs */
+ out_be32(mm_gc->regs + GPIO_IER, 0xffffffff);
+ out_be32(mm_gc->regs + GPIO_IMR, 0);
+
+ irq_set_handler_data(hwirq, mpc8xxx_gc);
+ irq_set_chained_handler(hwirq, mpc8xxx_gpio_irq_cascade);
+
+skip_irq:
+ return;
+
+err:
+ pr_err("%s: registration failed with status %d\n",
+ np->full_name, ret);
+ kfree(mpc8xxx_gc);
+
+ return;
+}
+
+static int __init mpc8xxx_add_gpiochips(void)
+{
+ struct device_node *np;
+
+ for_each_matching_node(np, mpc8xxx_gpio_ids)
+ mpc8xxx_add_controller(np);
+
+ return 0;
+}
+arch_initcall(mpc8xxx_add_gpiochips);
#include <linux/basic_mmio_gpio.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/module.h>
#include <asm-generic/bug.h>
#include <asm/mach/irq.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/basic_mmio_gpio.h>
+#include <linux/module.h>
#include <mach/mxs.h>
#define MXS_SET 0x4
return (__raw_readl(reg) & GPIO_BIT(bank, gpio)) != 0;
}
-#define MOD_REG_BIT(reg, bit_mask, set) \
-do { \
- int l = __raw_readl(base + reg); \
- if (set) l |= bit_mask; \
- else l &= ~bit_mask; \
- __raw_writel(l, base + reg); \
-} while(0)
+static inline void _gpio_rmw(void __iomem *base, u32 reg, u32 mask, bool set)
+{
+ int l = __raw_readl(base + reg);
+
+ if (set)
+ l |= mask;
+ else
+ l &= ~mask;
+
+ __raw_writel(l, base + reg);
+}
/**
* _set_gpio_debounce - low level gpio debounce time
u32 gpio_bit = 1 << gpio;
if (cpu_is_omap44xx()) {
- MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit,
- trigger & IRQ_TYPE_LEVEL_LOW);
- MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT1, gpio_bit,
- trigger & IRQ_TYPE_LEVEL_HIGH);
- MOD_REG_BIT(OMAP4_GPIO_RISINGDETECT, gpio_bit,
- trigger & IRQ_TYPE_EDGE_RISING);
- MOD_REG_BIT(OMAP4_GPIO_FALLINGDETECT, gpio_bit,
- trigger & IRQ_TYPE_EDGE_FALLING);
+ _gpio_rmw(base, OMAP4_GPIO_LEVELDETECT0, gpio_bit,
+ trigger & IRQ_TYPE_LEVEL_LOW);
+ _gpio_rmw(base, OMAP4_GPIO_LEVELDETECT1, gpio_bit,
+ trigger & IRQ_TYPE_LEVEL_HIGH);
+ _gpio_rmw(base, OMAP4_GPIO_RISINGDETECT, gpio_bit,
+ trigger & IRQ_TYPE_EDGE_RISING);
+ _gpio_rmw(base, OMAP4_GPIO_FALLINGDETECT, gpio_bit,
+ trigger & IRQ_TYPE_EDGE_FALLING);
} else {
- MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
- trigger & IRQ_TYPE_LEVEL_LOW);
- MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
- trigger & IRQ_TYPE_LEVEL_HIGH);
- MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
- trigger & IRQ_TYPE_EDGE_RISING);
- MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
- trigger & IRQ_TYPE_EDGE_FALLING);
+ _gpio_rmw(base, OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
+ trigger & IRQ_TYPE_LEVEL_LOW);
+ _gpio_rmw(base, OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
+ trigger & IRQ_TYPE_LEVEL_HIGH);
+ _gpio_rmw(base, OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
+ trigger & IRQ_TYPE_EDGE_RISING);
+ _gpio_rmw(base, OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
+ trigger & IRQ_TYPE_EDGE_FALLING);
}
if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
if (cpu_is_omap44xx()) {
- MOD_REG_BIT(OMAP4_GPIO_IRQWAKEN0, gpio_bit,
- trigger != 0);
+ _gpio_rmw(base, OMAP4_GPIO_IRQWAKEN0, gpio_bit,
+ trigger != 0);
} else {
/*
* GPIO wakeup request can only be generated on edge
gc = irq_alloc_generic_chip("MPUIO", 1, irq_start, bank->base,
handle_simple_irq);
+ if (!gc) {
+ dev_err(bank->dev, "Memory alloc failed for gc\n");
+ return;
+ }
+
ct = gc->chip_types;
/* NOTE: No ack required, reading IRQ status clears it. */
/* set platform specific polarity inversion */
ret = pca953x_write_reg(chip, PCA953X_INVERT, invert);
- if (ret)
- goto out;
- return 0;
out:
return ret;
}
struct pca953x_platform_data *pdata;
struct pca953x_chip *chip;
int irq_base=0, invert=0;
- int ret = 0;
+ int ret;
chip = kzalloc(sizeof(struct pca953x_chip), GFP_KERNEL);
if (chip == NULL)
pca953x_setup_gpio(chip, id->driver_data & PCA_GPIO_MASK);
if (chip->chip_type == PCA953X_TYPE)
- device_pca953x_init(chip, invert);
- else if (chip->chip_type == PCA957X_TYPE)
- device_pca957x_init(chip, invert);
+ ret = device_pca953x_init(chip, invert);
else
+ ret = device_pca957x_init(chip, invert);
+ if (ret)
goto out_failed;
ret = pca953x_irq_setup(chip, id, irq_base);
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/i2c/pcf857x.h>
+#include <linux/module.h>
static const struct i2c_device_id pcf857x_id[] = {
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
*/
+#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/gpio.h>
+++ /dev/null
-/*
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * SAMSUNG - GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-#ifndef DEBUG_GPIO
-#define gpio_dbg(x...) do { } while (0)
-#else
-#define gpio_dbg(x...) printk(KERN_DEBUG x)
-#endif
-
-/* The samsung_gpiolib_4bit routines are to control the gpio banks where
- * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
- * following example:
- *
- * base + 0x00: Control register, 4 bits per gpio
- * gpio n: 4 bits starting at (4*n)
- * 0000 = input, 0001 = output, others mean special-function
- * base + 0x04: Data register, 1 bit per gpio
- * bit n: data bit n
- *
- * Note, since the data register is one bit per gpio and is at base + 0x4
- * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
- * the output.
-*/
-
-static int samsung_gpiolib_4bit_input(struct gpio_chip *chip,
- unsigned int offset)
-{
- struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
- void __iomem *base = ourchip->base;
- unsigned long con;
-
- con = __raw_readl(base + GPIOCON_OFF);
- con &= ~(0xf << con_4bit_shift(offset));
- __raw_writel(con, base + GPIOCON_OFF);
-
- gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
-
- return 0;
-}
-
-static int samsung_gpiolib_4bit_output(struct gpio_chip *chip,
- unsigned int offset, int value)
-{
- struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
- void __iomem *base = ourchip->base;
- unsigned long con;
- unsigned long dat;
-
- con = __raw_readl(base + GPIOCON_OFF);
- con &= ~(0xf << con_4bit_shift(offset));
- con |= 0x1 << con_4bit_shift(offset);
-
- dat = __raw_readl(base + GPIODAT_OFF);
-
- if (value)
- dat |= 1 << offset;
- else
- dat &= ~(1 << offset);
-
- __raw_writel(dat, base + GPIODAT_OFF);
- __raw_writel(con, base + GPIOCON_OFF);
- __raw_writel(dat, base + GPIODAT_OFF);
-
- gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
-
- return 0;
-}
-
-/* The next set of routines are for the case where the GPIO configuration
- * registers are 4 bits per GPIO but there is more than one register (the
- * bank has more than 8 GPIOs.
- *
- * This case is the similar to the 4 bit case, but the registers are as
- * follows:
- *
- * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
- * gpio n: 4 bits starting at (4*n)
- * 0000 = input, 0001 = output, others mean special-function
- * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
- * gpio n: 4 bits starting at (4*n)
- * 0000 = input, 0001 = output, others mean special-function
- * base + 0x08: Data register, 1 bit per gpio
- * bit n: data bit n
- *
- * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we
- * store the 'base + 0x4' address so that these routines see the data
- * register at ourchip->base + 0x04.
- */
-
-static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip,
- unsigned int offset)
-{
- struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
- void __iomem *base = ourchip->base;
- void __iomem *regcon = base;
- unsigned long con;
-
- if (offset > 7)
- offset -= 8;
- else
- regcon -= 4;
-
- con = __raw_readl(regcon);
- con &= ~(0xf << con_4bit_shift(offset));
- __raw_writel(con, regcon);
-
- gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con);
-
- return 0;
-}
-
-static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
- unsigned int offset, int value)
-{
- struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
- void __iomem *base = ourchip->base;
- void __iomem *regcon = base;
- unsigned long con;
- unsigned long dat;
- unsigned con_offset = offset;
-
- if (con_offset > 7)
- con_offset -= 8;
- else
- regcon -= 4;
-
- con = __raw_readl(regcon);
- con &= ~(0xf << con_4bit_shift(con_offset));
- con |= 0x1 << con_4bit_shift(con_offset);
-
- dat = __raw_readl(base + GPIODAT_OFF);
-
- if (value)
- dat |= 1 << offset;
- else
- dat &= ~(1 << offset);
-
- __raw_writel(dat, base + GPIODAT_OFF);
- __raw_writel(con, regcon);
- __raw_writel(dat, base + GPIODAT_OFF);
-
- gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
-
- return 0;
-}
-
-void __init samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip)
-{
- chip->chip.direction_input = samsung_gpiolib_4bit_input;
- chip->chip.direction_output = samsung_gpiolib_4bit_output;
- chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
-}
-
-void __init samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
-{
- chip->chip.direction_input = samsung_gpiolib_4bit2_input;
- chip->chip.direction_output = samsung_gpiolib_4bit2_output;
- chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
-}
-
-void __init samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip,
- int nr_chips)
-{
- for (; nr_chips > 0; nr_chips--, chip++) {
- samsung_gpiolib_add_4bit(chip);
- s3c_gpiolib_add(chip);
- }
-}
-
-void __init samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip,
- int nr_chips)
-{
- for (; nr_chips > 0; nr_chips--, chip++) {
- samsung_gpiolib_add_4bit2(chip);
- s3c_gpiolib_add(chip);
- }
-}
-
-void __init samsung_gpiolib_add_2bit_chips(struct s3c_gpio_chip *chip,
- int nr_chips)
-{
- for (; nr_chips > 0; nr_chips--, chip++)
- s3c_gpiolib_add(chip);
-}
+++ /dev/null
-/*
- * S5PC100 - GPIOlib support
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright 2009 Samsung Electronics Co
- * Kyungmin Park <kyungmin.park@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-/* S5PC100 GPIO bank summary:
- *
- * Bank GPIOs Style INT Type
- * A0 8 4Bit GPIO_INT0
- * A1 5 4Bit GPIO_INT1
- * B 8 4Bit GPIO_INT2
- * C 5 4Bit GPIO_INT3
- * D 7 4Bit GPIO_INT4
- * E0 8 4Bit GPIO_INT5
- * E1 6 4Bit GPIO_INT6
- * F0 8 4Bit GPIO_INT7
- * F1 8 4Bit GPIO_INT8
- * F2 8 4Bit GPIO_INT9
- * F3 4 4Bit GPIO_INT10
- * G0 8 4Bit GPIO_INT11
- * G1 3 4Bit GPIO_INT12
- * G2 7 4Bit GPIO_INT13
- * G3 7 4Bit GPIO_INT14
- * H0 8 4Bit WKUP_INT
- * H1 8 4Bit WKUP_INT
- * H2 8 4Bit WKUP_INT
- * H3 8 4Bit WKUP_INT
- * I 8 4Bit GPIO_INT15
- * J0 8 4Bit GPIO_INT16
- * J1 5 4Bit GPIO_INT17
- * J2 8 4Bit GPIO_INT18
- * J3 8 4Bit GPIO_INT19
- * J4 4 4Bit GPIO_INT20
- * K0 8 4Bit None
- * K1 6 4Bit None
- * K2 8 4Bit None
- * K3 8 4Bit None
- * L0 8 4Bit None
- * L1 8 4Bit None
- * L2 8 4Bit None
- * L3 8 4Bit None
- */
-
-static struct s3c_gpio_cfg gpio_cfg = {
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_eint = {
- .cfg_eint = 0xf,
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_noint = {
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-/*
- * GPIO bank's base address given the index of the bank in the
- * list of all gpio banks.
- */
-#define S5PC100_BANK_BASE(bank_nr) (S5P_VA_GPIO + ((bank_nr) * 0x20))
-
-/*
- * Following are the gpio banks in S5PC100.
- *
- * The 'config' member when left to NULL, is initialized to the default
- * structure gpio_cfg in the init function below.
- *
- * The 'base' member is also initialized in the init function below.
- * Note: The initialization of 'base' member of s3c_gpio_chip structure
- * uses the above macro and depends on the banks being listed in order here.
- */
-static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
- {
- .chip = {
- .base = S5PC100_GPA0(0),
- .ngpio = S5PC100_GPIO_A0_NR,
- .label = "GPA0",
- },
- }, {
- .chip = {
- .base = S5PC100_GPA1(0),
- .ngpio = S5PC100_GPIO_A1_NR,
- .label = "GPA1",
- },
- }, {
- .chip = {
- .base = S5PC100_GPB(0),
- .ngpio = S5PC100_GPIO_B_NR,
- .label = "GPB",
- },
- }, {
- .chip = {
- .base = S5PC100_GPC(0),
- .ngpio = S5PC100_GPIO_C_NR,
- .label = "GPC",
- },
- }, {
- .chip = {
- .base = S5PC100_GPD(0),
- .ngpio = S5PC100_GPIO_D_NR,
- .label = "GPD",
- },
- }, {
- .chip = {
- .base = S5PC100_GPE0(0),
- .ngpio = S5PC100_GPIO_E0_NR,
- .label = "GPE0",
- },
- }, {
- .chip = {
- .base = S5PC100_GPE1(0),
- .ngpio = S5PC100_GPIO_E1_NR,
- .label = "GPE1",
- },
- }, {
- .chip = {
- .base = S5PC100_GPF0(0),
- .ngpio = S5PC100_GPIO_F0_NR,
- .label = "GPF0",
- },
- }, {
- .chip = {
- .base = S5PC100_GPF1(0),
- .ngpio = S5PC100_GPIO_F1_NR,
- .label = "GPF1",
- },
- }, {
- .chip = {
- .base = S5PC100_GPF2(0),
- .ngpio = S5PC100_GPIO_F2_NR,
- .label = "GPF2",
- },
- }, {
- .chip = {
- .base = S5PC100_GPF3(0),
- .ngpio = S5PC100_GPIO_F3_NR,
- .label = "GPF3",
- },
- }, {
- .chip = {
- .base = S5PC100_GPG0(0),
- .ngpio = S5PC100_GPIO_G0_NR,
- .label = "GPG0",
- },
- }, {
- .chip = {
- .base = S5PC100_GPG1(0),
- .ngpio = S5PC100_GPIO_G1_NR,
- .label = "GPG1",
- },
- }, {
- .chip = {
- .base = S5PC100_GPG2(0),
- .ngpio = S5PC100_GPIO_G2_NR,
- .label = "GPG2",
- },
- }, {
- .chip = {
- .base = S5PC100_GPG3(0),
- .ngpio = S5PC100_GPIO_G3_NR,
- .label = "GPG3",
- },
- }, {
- .chip = {
- .base = S5PC100_GPI(0),
- .ngpio = S5PC100_GPIO_I_NR,
- .label = "GPI",
- },
- }, {
- .chip = {
- .base = S5PC100_GPJ0(0),
- .ngpio = S5PC100_GPIO_J0_NR,
- .label = "GPJ0",
- },
- }, {
- .chip = {
- .base = S5PC100_GPJ1(0),
- .ngpio = S5PC100_GPIO_J1_NR,
- .label = "GPJ1",
- },
- }, {
- .chip = {
- .base = S5PC100_GPJ2(0),
- .ngpio = S5PC100_GPIO_J2_NR,
- .label = "GPJ2",
- },
- }, {
- .chip = {
- .base = S5PC100_GPJ3(0),
- .ngpio = S5PC100_GPIO_J3_NR,
- .label = "GPJ3",
- },
- }, {
- .chip = {
- .base = S5PC100_GPJ4(0),
- .ngpio = S5PC100_GPIO_J4_NR,
- .label = "GPJ4",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PC100_GPK0(0),
- .ngpio = S5PC100_GPIO_K0_NR,
- .label = "GPK0",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PC100_GPK1(0),
- .ngpio = S5PC100_GPIO_K1_NR,
- .label = "GPK1",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PC100_GPK2(0),
- .ngpio = S5PC100_GPIO_K2_NR,
- .label = "GPK2",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PC100_GPK3(0),
- .ngpio = S5PC100_GPIO_K3_NR,
- .label = "GPK3",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PC100_GPL0(0),
- .ngpio = S5PC100_GPIO_L0_NR,
- .label = "GPL0",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PC100_GPL1(0),
- .ngpio = S5PC100_GPIO_L1_NR,
- .label = "GPL1",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PC100_GPL2(0),
- .ngpio = S5PC100_GPIO_L2_NR,
- .label = "GPL2",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PC100_GPL3(0),
- .ngpio = S5PC100_GPIO_L3_NR,
- .label = "GPL3",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PC100_GPL4(0),
- .ngpio = S5PC100_GPIO_L4_NR,
- .label = "GPL4",
- },
- }, {
- .base = (S5P_VA_GPIO + 0xC00),
- .config = &gpio_cfg_eint,
- .irq_base = IRQ_EINT(0),
- .chip = {
- .base = S5PC100_GPH0(0),
- .ngpio = S5PC100_GPIO_H0_NR,
- .label = "GPH0",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO + 0xC20),
- .config = &gpio_cfg_eint,
- .irq_base = IRQ_EINT(8),
- .chip = {
- .base = S5PC100_GPH1(0),
- .ngpio = S5PC100_GPIO_H1_NR,
- .label = "GPH1",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO + 0xC40),
- .config = &gpio_cfg_eint,
- .irq_base = IRQ_EINT(16),
- .chip = {
- .base = S5PC100_GPH2(0),
- .ngpio = S5PC100_GPIO_H2_NR,
- .label = "GPH2",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO + 0xC60),
- .config = &gpio_cfg_eint,
- .irq_base = IRQ_EINT(24),
- .chip = {
- .base = S5PC100_GPH3(0),
- .ngpio = S5PC100_GPIO_H3_NR,
- .label = "GPH3",
- .to_irq = samsung_gpiolib_to_irq,
- },
- },
-};
-
-static __init int s5pc100_gpiolib_init(void)
-{
- struct s3c_gpio_chip *chip = s5pc100_gpio_chips;
- int nr_chips = ARRAY_SIZE(s5pc100_gpio_chips);
- int gpioint_group = 0;
- int i;
-
- for (i = 0; i < nr_chips; i++, chip++) {
- if (chip->config == NULL) {
- chip->config = &gpio_cfg;
- chip->group = gpioint_group++;
- }
- if (chip->base == NULL)
- chip->base = S5PC100_BANK_BASE(i);
- }
-
- samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips, nr_chips);
- s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
-
- return 0;
-}
-core_initcall(s5pc100_gpiolib_init);
+++ /dev/null
-/*
- * S5PV210 - GPIOlib support
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <mach/map.h>
-
-static struct s3c_gpio_cfg gpio_cfg = {
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_noint = {
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-/* GPIO bank's base address given the index of the bank in the
- * list of all gpio banks.
- */
-#define S5PV210_BANK_BASE(bank_nr) (S5P_VA_GPIO + ((bank_nr) * 0x20))
-
-/*
- * Following are the gpio banks in v210.
- *
- * The 'config' member when left to NULL, is initialized to the default
- * structure gpio_cfg in the init function below.
- *
- * The 'base' member is also initialized in the init function below.
- * Note: The initialization of 'base' member of s3c_gpio_chip structure
- * uses the above macro and depends on the banks being listed in order here.
- */
-static struct s3c_gpio_chip s5pv210_gpio_4bit[] = {
- {
- .chip = {
- .base = S5PV210_GPA0(0),
- .ngpio = S5PV210_GPIO_A0_NR,
- .label = "GPA0",
- },
- }, {
- .chip = {
- .base = S5PV210_GPA1(0),
- .ngpio = S5PV210_GPIO_A1_NR,
- .label = "GPA1",
- },
- }, {
- .chip = {
- .base = S5PV210_GPB(0),
- .ngpio = S5PV210_GPIO_B_NR,
- .label = "GPB",
- },
- }, {
- .chip = {
- .base = S5PV210_GPC0(0),
- .ngpio = S5PV210_GPIO_C0_NR,
- .label = "GPC0",
- },
- }, {
- .chip = {
- .base = S5PV210_GPC1(0),
- .ngpio = S5PV210_GPIO_C1_NR,
- .label = "GPC1",
- },
- }, {
- .chip = {
- .base = S5PV210_GPD0(0),
- .ngpio = S5PV210_GPIO_D0_NR,
- .label = "GPD0",
- },
- }, {
- .chip = {
- .base = S5PV210_GPD1(0),
- .ngpio = S5PV210_GPIO_D1_NR,
- .label = "GPD1",
- },
- }, {
- .chip = {
- .base = S5PV210_GPE0(0),
- .ngpio = S5PV210_GPIO_E0_NR,
- .label = "GPE0",
- },
- }, {
- .chip = {
- .base = S5PV210_GPE1(0),
- .ngpio = S5PV210_GPIO_E1_NR,
- .label = "GPE1",
- },
- }, {
- .chip = {
- .base = S5PV210_GPF0(0),
- .ngpio = S5PV210_GPIO_F0_NR,
- .label = "GPF0",
- },
- }, {
- .chip = {
- .base = S5PV210_GPF1(0),
- .ngpio = S5PV210_GPIO_F1_NR,
- .label = "GPF1",
- },
- }, {
- .chip = {
- .base = S5PV210_GPF2(0),
- .ngpio = S5PV210_GPIO_F2_NR,
- .label = "GPF2",
- },
- }, {
- .chip = {
- .base = S5PV210_GPF3(0),
- .ngpio = S5PV210_GPIO_F3_NR,
- .label = "GPF3",
- },
- }, {
- .chip = {
- .base = S5PV210_GPG0(0),
- .ngpio = S5PV210_GPIO_G0_NR,
- .label = "GPG0",
- },
- }, {
- .chip = {
- .base = S5PV210_GPG1(0),
- .ngpio = S5PV210_GPIO_G1_NR,
- .label = "GPG1",
- },
- }, {
- .chip = {
- .base = S5PV210_GPG2(0),
- .ngpio = S5PV210_GPIO_G2_NR,
- .label = "GPG2",
- },
- }, {
- .chip = {
- .base = S5PV210_GPG3(0),
- .ngpio = S5PV210_GPIO_G3_NR,
- .label = "GPG3",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PV210_GPI(0),
- .ngpio = S5PV210_GPIO_I_NR,
- .label = "GPI",
- },
- }, {
- .chip = {
- .base = S5PV210_GPJ0(0),
- .ngpio = S5PV210_GPIO_J0_NR,
- .label = "GPJ0",
- },
- }, {
- .chip = {
- .base = S5PV210_GPJ1(0),
- .ngpio = S5PV210_GPIO_J1_NR,
- .label = "GPJ1",
- },
- }, {
- .chip = {
- .base = S5PV210_GPJ2(0),
- .ngpio = S5PV210_GPIO_J2_NR,
- .label = "GPJ2",
- },
- }, {
- .chip = {
- .base = S5PV210_GPJ3(0),
- .ngpio = S5PV210_GPIO_J3_NR,
- .label = "GPJ3",
- },
- }, {
- .chip = {
- .base = S5PV210_GPJ4(0),
- .ngpio = S5PV210_GPIO_J4_NR,
- .label = "GPJ4",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PV210_MP01(0),
- .ngpio = S5PV210_GPIO_MP01_NR,
- .label = "MP01",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PV210_MP02(0),
- .ngpio = S5PV210_GPIO_MP02_NR,
- .label = "MP02",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PV210_MP03(0),
- .ngpio = S5PV210_GPIO_MP03_NR,
- .label = "MP03",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PV210_MP04(0),
- .ngpio = S5PV210_GPIO_MP04_NR,
- .label = "MP04",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = S5PV210_MP05(0),
- .ngpio = S5PV210_GPIO_MP05_NR,
- .label = "MP05",
- },
- }, {
- .base = (S5P_VA_GPIO + 0xC00),
- .config = &gpio_cfg_noint,
- .irq_base = IRQ_EINT(0),
- .chip = {
- .base = S5PV210_GPH0(0),
- .ngpio = S5PV210_GPIO_H0_NR,
- .label = "GPH0",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO + 0xC20),
- .config = &gpio_cfg_noint,
- .irq_base = IRQ_EINT(8),
- .chip = {
- .base = S5PV210_GPH1(0),
- .ngpio = S5PV210_GPIO_H1_NR,
- .label = "GPH1",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO + 0xC40),
- .config = &gpio_cfg_noint,
- .irq_base = IRQ_EINT(16),
- .chip = {
- .base = S5PV210_GPH2(0),
- .ngpio = S5PV210_GPIO_H2_NR,
- .label = "GPH2",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO + 0xC60),
- .config = &gpio_cfg_noint,
- .irq_base = IRQ_EINT(24),
- .chip = {
- .base = S5PV210_GPH3(0),
- .ngpio = S5PV210_GPIO_H3_NR,
- .label = "GPH3",
- .to_irq = samsung_gpiolib_to_irq,
- },
- },
-};
-
-static __init int s5pv210_gpiolib_init(void)
-{
- struct s3c_gpio_chip *chip = s5pv210_gpio_4bit;
- int nr_chips = ARRAY_SIZE(s5pv210_gpio_4bit);
- int gpioint_group = 0;
- int i = 0;
-
- for (i = 0; i < nr_chips; i++, chip++) {
- if (chip->config == NULL) {
- chip->config = &gpio_cfg;
- chip->group = gpioint_group++;
- }
- if (chip->base == NULL)
- chip->base = S5PV210_BANK_BASE(i);
- }
-
- samsung_gpiolib_add_4bit_chips(s5pv210_gpio_4bit, nr_chips);
- s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
-
- return 0;
-}
-core_initcall(s5pv210_gpiolib_init);
--- /dev/null
+/*
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * SAMSUNG - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/sysdev.h>
+#include <linux/ioport.h>
+
+#include <asm/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <plat/gpio-fns.h>
+#include <plat/pm.h>
+
+#ifndef DEBUG_GPIO
+#define gpio_dbg(x...) do { } while (0)
+#else
+#define gpio_dbg(x...) printk(KERN_DEBUG x)
+#endif
+
+int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
+ unsigned int off, samsung_gpio_pull_t pull)
+{
+ void __iomem *reg = chip->base + 0x08;
+ int shift = off * 2;
+ u32 pup;
+
+ pup = __raw_readl(reg);
+ pup &= ~(3 << shift);
+ pup |= pull << shift;
+ __raw_writel(pup, reg);
+
+ return 0;
+}
+
+samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
+ unsigned int off)
+{
+ void __iomem *reg = chip->base + 0x08;
+ int shift = off * 2;
+ u32 pup = __raw_readl(reg);
+
+ pup >>= shift;
+ pup &= 0x3;
+
+ return (__force samsung_gpio_pull_t)pup;
+}
+
+int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip,
+ unsigned int off, samsung_gpio_pull_t pull)
+{
+ switch (pull) {
+ case S3C_GPIO_PULL_NONE:
+ pull = 0x01;
+ break;
+ case S3C_GPIO_PULL_UP:
+ pull = 0x00;
+ break;
+ case S3C_GPIO_PULL_DOWN:
+ pull = 0x02;
+ break;
+ }
+ return samsung_gpio_setpull_updown(chip, off, pull);
+}
+
+samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip,
+ unsigned int off)
+{
+ samsung_gpio_pull_t pull;
+
+ pull = samsung_gpio_getpull_updown(chip, off);
+
+ switch (pull) {
+ case 0x00:
+ pull = S3C_GPIO_PULL_UP;
+ break;
+ case 0x01:
+ case 0x03:
+ pull = S3C_GPIO_PULL_NONE;
+ break;
+ case 0x02:
+ pull = S3C_GPIO_PULL_DOWN;
+ break;
+ }
+
+ return pull;
+}
+
+static int s3c24xx_gpio_setpull_1(struct samsung_gpio_chip *chip,
+ unsigned int off, samsung_gpio_pull_t pull,
+ samsung_gpio_pull_t updown)
+{
+ void __iomem *reg = chip->base + 0x08;
+ u32 pup = __raw_readl(reg);
+
+ if (pull == updown)
+ pup &= ~(1 << off);
+ else if (pull == S3C_GPIO_PULL_NONE)
+ pup |= (1 << off);
+ else
+ return -EINVAL;
+
+ __raw_writel(pup, reg);
+ return 0;
+}
+
+static samsung_gpio_pull_t s3c24xx_gpio_getpull_1(struct samsung_gpio_chip *chip,
+ unsigned int off,
+ samsung_gpio_pull_t updown)
+{
+ void __iomem *reg = chip->base + 0x08;
+ u32 pup = __raw_readl(reg);
+
+ pup &= (1 << off);
+ return pup ? S3C_GPIO_PULL_NONE : updown;
+}
+
+samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip,
+ unsigned int off)
+{
+ return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP);
+}
+
+int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip,
+ unsigned int off, samsung_gpio_pull_t pull)
+{
+ return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP);
+}
+
+samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip,
+ unsigned int off)
+{
+ return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN);
+}
+
+int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip,
+ unsigned int off, samsung_gpio_pull_t pull)
+{
+ return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN);
+}
+
+static int exynos4_gpio_setpull(struct samsung_gpio_chip *chip,
+ unsigned int off, samsung_gpio_pull_t pull)
+{
+ if (pull == S3C_GPIO_PULL_UP)
+ pull = 3;
+
+ return samsung_gpio_setpull_updown(chip, off, pull);
+}
+
+static samsung_gpio_pull_t exynos4_gpio_getpull(struct samsung_gpio_chip *chip,
+ unsigned int off)
+{
+ samsung_gpio_pull_t pull;
+
+ pull = samsung_gpio_getpull_updown(chip, off);
+
+ if (pull == 3)
+ pull = S3C_GPIO_PULL_UP;
+
+ return pull;
+}
+
+/*
+ * samsung_gpio_setcfg_2bit - Samsung 2bit style GPIO configuration.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register
+ * has two bits of configuration per gpio, which have the following
+ * functions:
+ * 00 = input
+ * 01 = output
+ * 1x = special function
+ */
+
+static int samsung_gpio_setcfg_2bit(struct samsung_gpio_chip *chip,
+ unsigned int off, unsigned int cfg)
+{
+ void __iomem *reg = chip->base;
+ unsigned int shift = off * 2;
+ u32 con;
+
+ if (samsung_gpio_is_cfg_special(cfg)) {
+ cfg &= 0xf;
+ if (cfg > 3)
+ return -EINVAL;
+
+ cfg <<= shift;
+ }
+
+ con = __raw_readl(reg);
+ con &= ~(0x3 << shift);
+ con |= cfg;
+ __raw_writel(con, reg);
+
+ return 0;
+}
+
+/*
+ * samsung_gpio_getcfg_2bit - Samsung 2bit style GPIO configuration read.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ *
+ * The reverse of samsung_gpio_setcfg_2bit(). Will return a value whicg
+ * could be directly passed back to samsung_gpio_setcfg_2bit(), from the
+ * S3C_GPIO_SPECIAL() macro.
+ */
+
+static unsigned int samsung_gpio_getcfg_2bit(struct samsung_gpio_chip *chip,
+ unsigned int off)
+{
+ u32 con;
+
+ con = __raw_readl(chip->base);
+ con >>= off * 2;
+ con &= 3;
+
+ /* this conversion works for IN and OUT as well as special mode */
+ return S3C_GPIO_SPECIAL(con);
+}
+
+/*
+ * samsung_gpio_setcfg_4bit - Samsung 4bit single register GPIO config.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register has 4 bits
+ * of control per GPIO, generally in the form of:
+ * 0000 = Input
+ * 0001 = Output
+ * others = Special functions (dependent on bank)
+ *
+ * Note, since the code to deal with the case where there are two control
+ * registers instead of one, we do not have a separate set of functions for
+ * each case.
+ */
+
+static int samsung_gpio_setcfg_4bit(struct samsung_gpio_chip *chip,
+ unsigned int off, unsigned int cfg)
+{
+ void __iomem *reg = chip->base;
+ unsigned int shift = (off & 7) * 4;
+ u32 con;
+
+ if (off < 8 && chip->chip.ngpio > 8)
+ reg -= 4;
+
+ if (samsung_gpio_is_cfg_special(cfg)) {
+ cfg &= 0xf;
+ cfg <<= shift;
+ }
+
+ con = __raw_readl(reg);
+ con &= ~(0xf << shift);
+ con |= cfg;
+ __raw_writel(con, reg);
+
+ return 0;
+}
+
+/*
+ * samsung_gpio_getcfg_4bit - Samsung 4bit single register GPIO config read.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ *
+ * The reverse of samsung_gpio_setcfg_4bit(), turning a gpio configuration
+ * register setting into a value the software can use, such as could be passed
+ * to samsung_gpio_setcfg_4bit().
+ *
+ * @sa samsung_gpio_getcfg_2bit
+ */
+
+static unsigned samsung_gpio_getcfg_4bit(struct samsung_gpio_chip *chip,
+ unsigned int off)
+{
+ void __iomem *reg = chip->base;
+ unsigned int shift = (off & 7) * 4;
+ u32 con;
+
+ if (off < 8 && chip->chip.ngpio > 8)
+ reg -= 4;
+
+ con = __raw_readl(reg);
+ con >>= shift;
+ con &= 0xf;
+
+ /* this conversion works for IN and OUT as well as special mode */
+ return S3C_GPIO_SPECIAL(con);
+}
+
+#ifdef CONFIG_PLAT_S3C24XX
+/*
+ * s3c24xx_gpio_setcfg_abank - S3C24XX style GPIO configuration (Bank A)
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register
+ * has one bit of configuration for the gpio, where setting the bit
+ * means the pin is in special function mode and unset means output.
+ */
+
+static int s3c24xx_gpio_setcfg_abank(struct samsung_gpio_chip *chip,
+ unsigned int off, unsigned int cfg)
+{
+ void __iomem *reg = chip->base;
+ unsigned int shift = off;
+ u32 con;
+
+ if (samsung_gpio_is_cfg_special(cfg)) {
+ cfg &= 0xf;
+
+ /* Map output to 0, and SFN2 to 1 */
+ cfg -= 1;
+ if (cfg > 1)
+ return -EINVAL;
+
+ cfg <<= shift;
+ }
+
+ con = __raw_readl(reg);
+ con &= ~(0x1 << shift);
+ con |= cfg;
+ __raw_writel(con, reg);
+
+ return 0;
+}
+
+/*
+ * s3c24xx_gpio_getcfg_abank - S3C24XX style GPIO configuration read (Bank A)
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ *
+ * The reverse of s3c24xx_gpio_setcfg_abank() turning an GPIO into a usable
+ * GPIO configuration value.
+ *
+ * @sa samsung_gpio_getcfg_2bit
+ * @sa samsung_gpio_getcfg_4bit
+ */
+
+static unsigned s3c24xx_gpio_getcfg_abank(struct samsung_gpio_chip *chip,
+ unsigned int off)
+{
+ u32 con;
+
+ con = __raw_readl(chip->base);
+ con >>= off;
+ con &= 1;
+ con++;
+
+ return S3C_GPIO_SFN(con);
+}
+#endif
+
+#if defined(CONFIG_CPU_S5P6440) || defined(CONFIG_CPU_S5P6450)
+static int s5p64x0_gpio_setcfg_rbank(struct samsung_gpio_chip *chip,
+ unsigned int off, unsigned int cfg)
+{
+ void __iomem *reg = chip->base;
+ unsigned int shift;
+ u32 con;
+
+ switch (off) {
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ case 5:
+ shift = (off & 7) * 4;
+ reg -= 4;
+ break;
+ case 6:
+ shift = ((off + 1) & 7) * 4;
+ reg -= 4;
+ default:
+ shift = ((off + 1) & 7) * 4;
+ break;
+ }
+
+ if (samsung_gpio_is_cfg_special(cfg)) {
+ cfg &= 0xf;
+ cfg <<= shift;
+ }
+
+ con = __raw_readl(reg);
+ con &= ~(0xf << shift);
+ con |= cfg;
+ __raw_writel(con, reg);
+
+ return 0;
+}
+#endif
+
+static void __init samsung_gpiolib_set_cfg(struct samsung_gpio_cfg *chipcfg,
+ int nr_chips)
+{
+ for (; nr_chips > 0; nr_chips--, chipcfg++) {
+ if (!chipcfg->set_config)
+ chipcfg->set_config = samsung_gpio_setcfg_4bit;
+ if (!chipcfg->get_config)
+ chipcfg->get_config = samsung_gpio_getcfg_4bit;
+ if (!chipcfg->set_pull)
+ chipcfg->set_pull = samsung_gpio_setpull_updown;
+ if (!chipcfg->get_pull)
+ chipcfg->get_pull = samsung_gpio_getpull_updown;
+ }
+}
+
+struct samsung_gpio_cfg s3c24xx_gpiocfg_default = {
+ .set_config = samsung_gpio_setcfg_2bit,
+ .get_config = samsung_gpio_getcfg_2bit,
+};
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct samsung_gpio_cfg s3c24xx_gpiocfg_banka = {
+ .set_config = s3c24xx_gpio_setcfg_abank,
+ .get_config = s3c24xx_gpio_getcfg_abank,
+};
+#endif
+
+static struct samsung_gpio_cfg exynos4_gpio_cfg = {
+ .set_pull = exynos4_gpio_setpull,
+ .get_pull = exynos4_gpio_getpull,
+ .set_config = samsung_gpio_setcfg_4bit,
+ .get_config = samsung_gpio_getcfg_4bit,
+};
+
+#if defined(CONFIG_CPU_S5P6440) || defined(CONFIG_CPU_S5P6450)
+static struct samsung_gpio_cfg s5p64x0_gpio_cfg_rbank = {
+ .cfg_eint = 0x3,
+ .set_config = s5p64x0_gpio_setcfg_rbank,
+ .get_config = samsung_gpio_getcfg_4bit,
+ .set_pull = samsung_gpio_setpull_updown,
+ .get_pull = samsung_gpio_getpull_updown,
+};
+#endif
+
+static struct samsung_gpio_cfg samsung_gpio_cfgs[] = {
+ {
+ .cfg_eint = 0x0,
+ }, {
+ .cfg_eint = 0x3,
+ }, {
+ .cfg_eint = 0x7,
+ }, {
+ .cfg_eint = 0xF,
+ }, {
+ .cfg_eint = 0x0,
+ .set_config = samsung_gpio_setcfg_2bit,
+ .get_config = samsung_gpio_getcfg_2bit,
+ }, {
+ .cfg_eint = 0x2,
+ .set_config = samsung_gpio_setcfg_2bit,
+ .get_config = samsung_gpio_getcfg_2bit,
+ }, {
+ .cfg_eint = 0x3,
+ .set_config = samsung_gpio_setcfg_2bit,
+ .get_config = samsung_gpio_getcfg_2bit,
+ }, {
+ .set_config = samsung_gpio_setcfg_2bit,
+ .get_config = samsung_gpio_getcfg_2bit,
+ }, {
+ .set_pull = exynos4_gpio_setpull,
+ .get_pull = exynos4_gpio_getpull,
+ }, {
+ .cfg_eint = 0x3,
+ .set_pull = exynos4_gpio_setpull,
+ .get_pull = exynos4_gpio_getpull,
+ }
+};
+
+/*
+ * Default routines for controlling GPIO, based on the original S3C24XX
+ * GPIO functions which deal with the case where each gpio bank of the
+ * chip is as following:
+ *
+ * base + 0x00: Control register, 2 bits per gpio
+ * gpio n: 2 bits starting at (2*n)
+ * 00 = input, 01 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ * bit n: data bit n
+*/
+
+static int samsung_gpiolib_2bit_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long flags;
+ unsigned long con;
+
+ samsung_gpio_lock(ourchip, flags);
+
+ con = __raw_readl(base + 0x00);
+ con &= ~(3 << (offset * 2));
+
+ __raw_writel(con, base + 0x00);
+
+ samsung_gpio_unlock(ourchip, flags);
+ return 0;
+}
+
+static int samsung_gpiolib_2bit_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long flags;
+ unsigned long dat;
+ unsigned long con;
+
+ samsung_gpio_lock(ourchip, flags);
+
+ dat = __raw_readl(base + 0x04);
+ dat &= ~(1 << offset);
+ if (value)
+ dat |= 1 << offset;
+ __raw_writel(dat, base + 0x04);
+
+ con = __raw_readl(base + 0x00);
+ con &= ~(3 << (offset * 2));
+ con |= 1 << (offset * 2);
+
+ __raw_writel(con, base + 0x00);
+ __raw_writel(dat, base + 0x04);
+
+ samsung_gpio_unlock(ourchip, flags);
+ return 0;
+}
+
+/*
+ * The samsung_gpiolib_4bit routines are to control the gpio banks where
+ * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
+ * following example:
+ *
+ * base + 0x00: Control register, 4 bits per gpio
+ * gpio n: 4 bits starting at (4*n)
+ * 0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ * bit n: data bit n
+ *
+ * Note, since the data register is one bit per gpio and is at base + 0x4
+ * we can use samsung_gpiolib_get and samsung_gpiolib_set to change the
+ * state of the output.
+ */
+
+static int samsung_gpiolib_4bit_input(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long con;
+
+ con = __raw_readl(base + GPIOCON_OFF);
+ con &= ~(0xf << con_4bit_shift(offset));
+ __raw_writel(con, base + GPIOCON_OFF);
+
+ gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
+
+ return 0;
+}
+
+static int samsung_gpiolib_4bit_output(struct gpio_chip *chip,
+ unsigned int offset, int value)
+{
+ struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long con;
+ unsigned long dat;
+
+ con = __raw_readl(base + GPIOCON_OFF);
+ con &= ~(0xf << con_4bit_shift(offset));
+ con |= 0x1 << con_4bit_shift(offset);
+
+ dat = __raw_readl(base + GPIODAT_OFF);
+
+ if (value)
+ dat |= 1 << offset;
+ else
+ dat &= ~(1 << offset);
+
+ __raw_writel(dat, base + GPIODAT_OFF);
+ __raw_writel(con, base + GPIOCON_OFF);
+ __raw_writel(dat, base + GPIODAT_OFF);
+
+ gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+ return 0;
+}
+
+/*
+ * The next set of routines are for the case where the GPIO configuration
+ * registers are 4 bits per GPIO but there is more than one register (the
+ * bank has more than 8 GPIOs.
+ *
+ * This case is the similar to the 4 bit case, but the registers are as
+ * follows:
+ *
+ * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
+ * gpio n: 4 bits starting at (4*n)
+ * 0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
+ * gpio n: 4 bits starting at (4*n)
+ * 0000 = input, 0001 = output, others mean special-function
+ * base + 0x08: Data register, 1 bit per gpio
+ * bit n: data bit n
+ *
+ * To allow us to use the samsung_gpiolib_get and samsung_gpiolib_set
+ * routines we store the 'base + 0x4' address so that these routines see
+ * the data register at ourchip->base + 0x04.
+ */
+
+static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+ void __iomem *base = ourchip->base;
+ void __iomem *regcon = base;
+ unsigned long con;
+
+ if (offset > 7)
+ offset -= 8;
+ else
+ regcon -= 4;
+
+ con = __raw_readl(regcon);
+ con &= ~(0xf << con_4bit_shift(offset));
+ __raw_writel(con, regcon);
+
+ gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con);
+
+ return 0;
+}
+
+static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
+ unsigned int offset, int value)
+{
+ struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+ void __iomem *base = ourchip->base;
+ void __iomem *regcon = base;
+ unsigned long con;
+ unsigned long dat;
+ unsigned con_offset = offset;
+
+ if (con_offset > 7)
+ con_offset -= 8;
+ else
+ regcon -= 4;
+
+ con = __raw_readl(regcon);
+ con &= ~(0xf << con_4bit_shift(con_offset));
+ con |= 0x1 << con_4bit_shift(con_offset);
+
+ dat = __raw_readl(base + GPIODAT_OFF);
+
+ if (value)
+ dat |= 1 << offset;
+ else
+ dat &= ~(1 << offset);
+
+ __raw_writel(dat, base + GPIODAT_OFF);
+ __raw_writel(con, regcon);
+ __raw_writel(dat, base + GPIODAT_OFF);
+
+ gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+ return 0;
+}
+
+#ifdef CONFIG_PLAT_S3C24XX
+/* The next set of routines are for the case of s3c24xx bank a */
+
+static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
+{
+ return -EINVAL;
+}
+
+static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long flags;
+ unsigned long dat;
+ unsigned long con;
+
+ local_irq_save(flags);
+
+ con = __raw_readl(base + 0x00);
+ dat = __raw_readl(base + 0x04);
+
+ dat &= ~(1 << offset);
+ if (value)
+ dat |= 1 << offset;
+
+ __raw_writel(dat, base + 0x04);
+
+ con &= ~(1 << offset);
+
+ __raw_writel(con, base + 0x00);
+ __raw_writel(dat, base + 0x04);
+
+ local_irq_restore(flags);
+ return 0;
+}
+#endif
+
+/* The next set of routines are for the case of s5p64x0 bank r */
+
+static int s5p64x0_gpiolib_rbank_input(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+ void __iomem *base = ourchip->base;
+ void __iomem *regcon = base;
+ unsigned long con;
+ unsigned long flags;
+
+ switch (offset) {
+ case 6:
+ offset += 1;
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ case 5:
+ regcon -= 4;
+ break;
+ default:
+ offset -= 7;
+ break;
+ }
+
+ samsung_gpio_lock(ourchip, flags);
+
+ con = __raw_readl(regcon);
+ con &= ~(0xf << con_4bit_shift(offset));
+ __raw_writel(con, regcon);
+
+ samsung_gpio_unlock(ourchip, flags);
+
+ return 0;
+}
+
+static int s5p64x0_gpiolib_rbank_output(struct gpio_chip *chip,
+ unsigned int offset, int value)
+{
+ struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+ void __iomem *base = ourchip->base;
+ void __iomem *regcon = base;
+ unsigned long con;
+ unsigned long dat;
+ unsigned long flags;
+ unsigned con_offset = offset;
+
+ switch (con_offset) {
+ case 6:
+ con_offset += 1;
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ case 5:
+ regcon -= 4;
+ break;
+ default:
+ con_offset -= 7;
+ break;
+ }
+
+ samsung_gpio_lock(ourchip, flags);
+
+ con = __raw_readl(regcon);
+ con &= ~(0xf << con_4bit_shift(con_offset));
+ con |= 0x1 << con_4bit_shift(con_offset);
+
+ dat = __raw_readl(base + GPIODAT_OFF);
+ if (value)
+ dat |= 1 << offset;
+ else
+ dat &= ~(1 << offset);
+
+ __raw_writel(con, regcon);
+ __raw_writel(dat, base + GPIODAT_OFF);
+
+ samsung_gpio_unlock(ourchip, flags);
+
+ return 0;
+}
+
+static void samsung_gpiolib_set(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long flags;
+ unsigned long dat;
+
+ samsung_gpio_lock(ourchip, flags);
+
+ dat = __raw_readl(base + 0x04);
+ dat &= ~(1 << offset);
+ if (value)
+ dat |= 1 << offset;
+ __raw_writel(dat, base + 0x04);
+
+ samsung_gpio_unlock(ourchip, flags);
+}
+
+static int samsung_gpiolib_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+ unsigned long val;
+
+ val = __raw_readl(ourchip->base + 0x04);
+ val >>= offset;
+ val &= 1;
+
+ return val;
+}
+
+/*
+ * CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios
+ * for use with the configuration calls, and other parts of the s3c gpiolib
+ * support code.
+ *
+ * Not all s3c support code will need this, as some configurations of cpu
+ * may only support one or two different configuration options and have an
+ * easy gpio to samsung_gpio_chip mapping function. If this is the case, then
+ * the machine support file should provide its own samsung_gpiolib_getchip()
+ * and any other necessary functions.
+ */
+
+#ifdef CONFIG_S3C_GPIO_TRACK
+struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END];
+
+static __init void s3c_gpiolib_track(struct samsung_gpio_chip *chip)
+{
+ unsigned int gpn;
+ int i;
+
+ gpn = chip->chip.base;
+ for (i = 0; i < chip->chip.ngpio; i++, gpn++) {
+ BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios));
+ s3c_gpios[gpn] = chip;
+ }
+}
+#endif /* CONFIG_S3C_GPIO_TRACK */
+
+/*
+ * samsung_gpiolib_add() - add the Samsung gpio_chip.
+ * @chip: The chip to register
+ *
+ * This is a wrapper to gpiochip_add() that takes our specific gpio chip
+ * information and makes the necessary alterations for the platform and
+ * notes the information for use with the configuration systems and any
+ * other parts of the system.
+ */
+
+static void __init samsung_gpiolib_add(struct samsung_gpio_chip *chip)
+{
+ struct gpio_chip *gc = &chip->chip;
+ int ret;
+
+ BUG_ON(!chip->base);
+ BUG_ON(!gc->label);
+ BUG_ON(!gc->ngpio);
+
+ spin_lock_init(&chip->lock);
+
+ if (!gc->direction_input)
+ gc->direction_input = samsung_gpiolib_2bit_input;
+ if (!gc->direction_output)
+ gc->direction_output = samsung_gpiolib_2bit_output;
+ if (!gc->set)
+ gc->set = samsung_gpiolib_set;
+ if (!gc->get)
+ gc->get = samsung_gpiolib_get;
+
+#ifdef CONFIG_PM
+ if (chip->pm != NULL) {
+ if (!chip->pm->save || !chip->pm->resume)
+ printk(KERN_ERR "gpio: %s has missing PM functions\n",
+ gc->label);
+ } else
+ printk(KERN_ERR "gpio: %s has no PM function\n", gc->label);
+#endif
+
+ /* gpiochip_add() prints own failure message on error. */
+ ret = gpiochip_add(gc);
+ if (ret >= 0)
+ s3c_gpiolib_track(chip);
+}
+
+static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip,
+ int nr_chips, void __iomem *base)
+{
+ int i;
+ struct gpio_chip *gc = &chip->chip;
+
+ for (i = 0 ; i < nr_chips; i++, chip++) {
+ /* skip banks not present on SoC */
+ if (chip->chip.base >= S3C_GPIO_END)
+ continue;
+
+ if (!chip->config)
+ chip->config = &s3c24xx_gpiocfg_default;
+ if (!chip->pm)
+ chip->pm = __gpio_pm(&samsung_gpio_pm_2bit);
+ if ((base != NULL) && (chip->base == NULL))
+ chip->base = base + ((i) * 0x10);
+
+ if (!gc->direction_input)
+ gc->direction_input = samsung_gpiolib_2bit_input;
+ if (!gc->direction_output)
+ gc->direction_output = samsung_gpiolib_2bit_output;
+
+ samsung_gpiolib_add(chip);
+ }
+}
+
+static void __init samsung_gpiolib_add_2bit_chips(struct samsung_gpio_chip *chip,
+ int nr_chips, void __iomem *base,
+ unsigned int offset)
+{
+ int i;
+
+ for (i = 0 ; i < nr_chips; i++, chip++) {
+ chip->chip.direction_input = samsung_gpiolib_2bit_input;
+ chip->chip.direction_output = samsung_gpiolib_2bit_output;
+
+ if (!chip->config)
+ chip->config = &samsung_gpio_cfgs[7];
+ if (!chip->pm)
+ chip->pm = __gpio_pm(&samsung_gpio_pm_2bit);
+ if ((base != NULL) && (chip->base == NULL))
+ chip->base = base + ((i) * offset);
+
+ samsung_gpiolib_add(chip);
+ }
+}
+
+/*
+ * samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config.
+ * @chip: The gpio chip that is being configured.
+ * @nr_chips: The no of chips (gpio ports) for the GPIO being configured.
+ *
+ * This helper deal with the GPIO cases where the control register has 4 bits
+ * of control per GPIO, generally in the form of:
+ * 0000 = Input
+ * 0001 = Output
+ * others = Special functions (dependent on bank)
+ *
+ * Note, since the code to deal with the case where there are two control
+ * registers instead of one, we do not have a separate set of function
+ * (samsung_gpiolib_add_4bit2_chips)for each case.
+ */
+
+static void __init samsung_gpiolib_add_4bit_chips(struct samsung_gpio_chip *chip,
+ int nr_chips, void __iomem *base)
+{
+ int i;
+
+ for (i = 0 ; i < nr_chips; i++, chip++) {
+ chip->chip.direction_input = samsung_gpiolib_4bit_input;
+ chip->chip.direction_output = samsung_gpiolib_4bit_output;
+
+ if (!chip->config)
+ chip->config = &samsung_gpio_cfgs[2];
+ if (!chip->pm)
+ chip->pm = __gpio_pm(&samsung_gpio_pm_4bit);
+ if ((base != NULL) && (chip->base == NULL))
+ chip->base = base + ((i) * 0x20);
+
+ samsung_gpiolib_add(chip);
+ }
+}
+
+static void __init samsung_gpiolib_add_4bit2_chips(struct samsung_gpio_chip *chip,
+ int nr_chips)
+{
+ for (; nr_chips > 0; nr_chips--, chip++) {
+ chip->chip.direction_input = samsung_gpiolib_4bit2_input;
+ chip->chip.direction_output = samsung_gpiolib_4bit2_output;
+
+ if (!chip->config)
+ chip->config = &samsung_gpio_cfgs[2];
+ if (!chip->pm)
+ chip->pm = __gpio_pm(&samsung_gpio_pm_4bit);
+
+ samsung_gpiolib_add(chip);
+ }
+}
+
+static void __init s5p64x0_gpiolib_add_rbank(struct samsung_gpio_chip *chip,
+ int nr_chips)
+{
+ for (; nr_chips > 0; nr_chips--, chip++) {
+ chip->chip.direction_input = s5p64x0_gpiolib_rbank_input;
+ chip->chip.direction_output = s5p64x0_gpiolib_rbank_output;
+
+ if (!chip->pm)
+ chip->pm = __gpio_pm(&samsung_gpio_pm_4bit);
+
+ samsung_gpiolib_add(chip);
+ }
+}
+
+int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
+{
+ struct samsung_gpio_chip *samsung_chip = container_of(chip, struct samsung_gpio_chip, chip);
+
+ return samsung_chip->irq_base + offset;
+}
+
+#ifdef CONFIG_PLAT_S3C24XX
+static int s3c24xx_gpiolib_fbank_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ if (offset < 4)
+ return IRQ_EINT0 + offset;
+
+ if (offset < 8)
+ return IRQ_EINT4 + offset - 4;
+
+ return -EINVAL;
+}
+#endif
+
+#ifdef CONFIG_PLAT_S3C64XX
+static int s3c64xx_gpiolib_mbank_to_irq(struct gpio_chip *chip, unsigned pin)
+{
+ return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
+}
+
+static int s3c64xx_gpiolib_lbank_to_irq(struct gpio_chip *chip, unsigned pin)
+{
+ return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
+}
+#endif
+
+struct samsung_gpio_chip s3c24xx_gpios[] = {
+#ifdef CONFIG_PLAT_S3C24XX
+ {
+ .config = &s3c24xx_gpiocfg_banka,
+ .chip = {
+ .base = S3C2410_GPA(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOA",
+ .ngpio = 24,
+ .direction_input = s3c24xx_gpiolib_banka_input,
+ .direction_output = s3c24xx_gpiolib_banka_output,
+ },
+ }, {
+ .chip = {
+ .base = S3C2410_GPB(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOB",
+ .ngpio = 16,
+ },
+ }, {
+ .chip = {
+ .base = S3C2410_GPC(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOC",
+ .ngpio = 16,
+ },
+ }, {
+ .chip = {
+ .base = S3C2410_GPD(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOD",
+ .ngpio = 16,
+ },
+ }, {
+ .chip = {
+ .base = S3C2410_GPE(0),
+ .label = "GPIOE",
+ .owner = THIS_MODULE,
+ .ngpio = 16,
+ },
+ }, {
+ .chip = {
+ .base = S3C2410_GPF(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOF",
+ .ngpio = 8,
+ .to_irq = s3c24xx_gpiolib_fbank_to_irq,
+ },
+ }, {
+ .irq_base = IRQ_EINT8,
+ .chip = {
+ .base = S3C2410_GPG(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOG",
+ .ngpio = 16,
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .chip = {
+ .base = S3C2410_GPH(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOH",
+ .ngpio = 11,
+ },
+ },
+ /* GPIOS for the S3C2443 and later devices. */
+ {
+ .base = S3C2440_GPJCON,
+ .chip = {
+ .base = S3C2410_GPJ(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOJ",
+ .ngpio = 16,
+ },
+ }, {
+ .base = S3C2443_GPKCON,
+ .chip = {
+ .base = S3C2410_GPK(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOK",
+ .ngpio = 16,
+ },
+ }, {
+ .base = S3C2443_GPLCON,
+ .chip = {
+ .base = S3C2410_GPL(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOL",
+ .ngpio = 15,
+ },
+ }, {
+ .base = S3C2443_GPMCON,
+ .chip = {
+ .base = S3C2410_GPM(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOM",
+ .ngpio = 2,
+ },
+ },
+#endif
+};
+
+/*
+ * GPIO bank summary:
+ *
+ * Bank GPIOs Style SlpCon ExtInt Group
+ * A 8 4Bit Yes 1
+ * B 7 4Bit Yes 1
+ * C 8 4Bit Yes 2
+ * D 5 4Bit Yes 3
+ * E 5 4Bit Yes None
+ * F 16 2Bit Yes 4 [1]
+ * G 7 4Bit Yes 5
+ * H 10 4Bit[2] Yes 6
+ * I 16 2Bit Yes None
+ * J 12 2Bit Yes None
+ * K 16 4Bit[2] No None
+ * L 15 4Bit[2] No None
+ * M 6 4Bit No IRQ_EINT
+ * N 16 2Bit No IRQ_EINT
+ * O 16 2Bit Yes 7
+ * P 15 2Bit Yes 8
+ * Q 9 2Bit Yes 9
+ *
+ * [1] BANKF pins 14,15 do not form part of the external interrupt sources
+ * [2] BANK has two control registers, GPxCON0 and GPxCON1
+ */
+
+static struct samsung_gpio_chip s3c64xx_gpios_4bit[] = {
+#ifdef CONFIG_PLAT_S3C64XX
+ {
+ .chip = {
+ .base = S3C64XX_GPA(0),
+ .ngpio = S3C64XX_GPIO_A_NR,
+ .label = "GPA",
+ },
+ }, {
+ .chip = {
+ .base = S3C64XX_GPB(0),
+ .ngpio = S3C64XX_GPIO_B_NR,
+ .label = "GPB",
+ },
+ }, {
+ .chip = {
+ .base = S3C64XX_GPC(0),
+ .ngpio = S3C64XX_GPIO_C_NR,
+ .label = "GPC",
+ },
+ }, {
+ .chip = {
+ .base = S3C64XX_GPD(0),
+ .ngpio = S3C64XX_GPIO_D_NR,
+ .label = "GPD",
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[0],
+ .chip = {
+ .base = S3C64XX_GPE(0),
+ .ngpio = S3C64XX_GPIO_E_NR,
+ .label = "GPE",
+ },
+ }, {
+ .base = S3C64XX_GPG_BASE,
+ .chip = {
+ .base = S3C64XX_GPG(0),
+ .ngpio = S3C64XX_GPIO_G_NR,
+ .label = "GPG",
+ },
+ }, {
+ .base = S3C64XX_GPM_BASE,
+ .config = &samsung_gpio_cfgs[1],
+ .chip = {
+ .base = S3C64XX_GPM(0),
+ .ngpio = S3C64XX_GPIO_M_NR,
+ .label = "GPM",
+ .to_irq = s3c64xx_gpiolib_mbank_to_irq,
+ },
+ },
+#endif
+};
+
+static struct samsung_gpio_chip s3c64xx_gpios_4bit2[] = {
+#ifdef CONFIG_PLAT_S3C64XX
+ {
+ .base = S3C64XX_GPH_BASE + 0x4,
+ .chip = {
+ .base = S3C64XX_GPH(0),
+ .ngpio = S3C64XX_GPIO_H_NR,
+ .label = "GPH",
+ },
+ }, {
+ .base = S3C64XX_GPK_BASE + 0x4,
+ .config = &samsung_gpio_cfgs[0],
+ .chip = {
+ .base = S3C64XX_GPK(0),
+ .ngpio = S3C64XX_GPIO_K_NR,
+ .label = "GPK",
+ },
+ }, {
+ .base = S3C64XX_GPL_BASE + 0x4,
+ .config = &samsung_gpio_cfgs[1],
+ .chip = {
+ .base = S3C64XX_GPL(0),
+ .ngpio = S3C64XX_GPIO_L_NR,
+ .label = "GPL",
+ .to_irq = s3c64xx_gpiolib_lbank_to_irq,
+ },
+ },
+#endif
+};
+
+static struct samsung_gpio_chip s3c64xx_gpios_2bit[] = {
+#ifdef CONFIG_PLAT_S3C64XX
+ {
+ .base = S3C64XX_GPF_BASE,
+ .config = &samsung_gpio_cfgs[6],
+ .chip = {
+ .base = S3C64XX_GPF(0),
+ .ngpio = S3C64XX_GPIO_F_NR,
+ .label = "GPF",
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[7],
+ .chip = {
+ .base = S3C64XX_GPI(0),
+ .ngpio = S3C64XX_GPIO_I_NR,
+ .label = "GPI",
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[7],
+ .chip = {
+ .base = S3C64XX_GPJ(0),
+ .ngpio = S3C64XX_GPIO_J_NR,
+ .label = "GPJ",
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[6],
+ .chip = {
+ .base = S3C64XX_GPO(0),
+ .ngpio = S3C64XX_GPIO_O_NR,
+ .label = "GPO",
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[6],
+ .chip = {
+ .base = S3C64XX_GPP(0),
+ .ngpio = S3C64XX_GPIO_P_NR,
+ .label = "GPP",
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[6],
+ .chip = {
+ .base = S3C64XX_GPQ(0),
+ .ngpio = S3C64XX_GPIO_Q_NR,
+ .label = "GPQ",
+ },
+ }, {
+ .base = S3C64XX_GPN_BASE,
+ .irq_base = IRQ_EINT(0),
+ .config = &samsung_gpio_cfgs[5],
+ .chip = {
+ .base = S3C64XX_GPN(0),
+ .ngpio = S3C64XX_GPIO_N_NR,
+ .label = "GPN",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ },
+#endif
+};
+
+/*
+ * S5P6440 GPIO bank summary:
+ *
+ * Bank GPIOs Style SlpCon ExtInt Group
+ * A 6 4Bit Yes 1
+ * B 7 4Bit Yes 1
+ * C 8 4Bit Yes 2
+ * F 2 2Bit Yes 4 [1]
+ * G 7 4Bit Yes 5
+ * H 10 4Bit[2] Yes 6
+ * I 16 2Bit Yes None
+ * J 12 2Bit Yes None
+ * N 16 2Bit No IRQ_EINT
+ * P 8 2Bit Yes 8
+ * R 15 4Bit[2] Yes 8
+ */
+
+static struct samsung_gpio_chip s5p6440_gpios_4bit[] = {
+#ifdef CONFIG_CPU_S5P6440
+ {
+ .chip = {
+ .base = S5P6440_GPA(0),
+ .ngpio = S5P6440_GPIO_A_NR,
+ .label = "GPA",
+ },
+ }, {
+ .chip = {
+ .base = S5P6440_GPB(0),
+ .ngpio = S5P6440_GPIO_B_NR,
+ .label = "GPB",
+ },
+ }, {
+ .chip = {
+ .base = S5P6440_GPC(0),
+ .ngpio = S5P6440_GPIO_C_NR,
+ .label = "GPC",
+ },
+ }, {
+ .base = S5P64X0_GPG_BASE,
+ .chip = {
+ .base = S5P6440_GPG(0),
+ .ngpio = S5P6440_GPIO_G_NR,
+ .label = "GPG",
+ },
+ },
+#endif
+};
+
+static struct samsung_gpio_chip s5p6440_gpios_4bit2[] = {
+#ifdef CONFIG_CPU_S5P6440
+ {
+ .base = S5P64X0_GPH_BASE + 0x4,
+ .chip = {
+ .base = S5P6440_GPH(0),
+ .ngpio = S5P6440_GPIO_H_NR,
+ .label = "GPH",
+ },
+ },
+#endif
+};
+
+static struct samsung_gpio_chip s5p6440_gpios_rbank[] = {
+#ifdef CONFIG_CPU_S5P6440
+ {
+ .base = S5P64X0_GPR_BASE + 0x4,
+ .config = &s5p64x0_gpio_cfg_rbank,
+ .chip = {
+ .base = S5P6440_GPR(0),
+ .ngpio = S5P6440_GPIO_R_NR,
+ .label = "GPR",
+ },
+ },
+#endif
+};
+
+static struct samsung_gpio_chip s5p6440_gpios_2bit[] = {
+#ifdef CONFIG_CPU_S5P6440
+ {
+ .base = S5P64X0_GPF_BASE,
+ .config = &samsung_gpio_cfgs[6],
+ .chip = {
+ .base = S5P6440_GPF(0),
+ .ngpio = S5P6440_GPIO_F_NR,
+ .label = "GPF",
+ },
+ }, {
+ .base = S5P64X0_GPI_BASE,
+ .config = &samsung_gpio_cfgs[4],
+ .chip = {
+ .base = S5P6440_GPI(0),
+ .ngpio = S5P6440_GPIO_I_NR,
+ .label = "GPI",
+ },
+ }, {
+ .base = S5P64X0_GPJ_BASE,
+ .config = &samsung_gpio_cfgs[4],
+ .chip = {
+ .base = S5P6440_GPJ(0),
+ .ngpio = S5P6440_GPIO_J_NR,
+ .label = "GPJ",
+ },
+ }, {
+ .base = S5P64X0_GPN_BASE,
+ .config = &samsung_gpio_cfgs[5],
+ .chip = {
+ .base = S5P6440_GPN(0),
+ .ngpio = S5P6440_GPIO_N_NR,
+ .label = "GPN",
+ },
+ }, {
+ .base = S5P64X0_GPP_BASE,
+ .config = &samsung_gpio_cfgs[6],
+ .chip = {
+ .base = S5P6440_GPP(0),
+ .ngpio = S5P6440_GPIO_P_NR,
+ .label = "GPP",
+ },
+ },
+#endif
+};
+
+/*
+ * S5P6450 GPIO bank summary:
+ *
+ * Bank GPIOs Style SlpCon ExtInt Group
+ * A 6 4Bit Yes 1
+ * B 7 4Bit Yes 1
+ * C 8 4Bit Yes 2
+ * D 8 4Bit Yes None
+ * F 2 2Bit Yes None
+ * G 14 4Bit[2] Yes 5
+ * H 10 4Bit[2] Yes 6
+ * I 16 2Bit Yes None
+ * J 12 2Bit Yes None
+ * K 5 4Bit Yes None
+ * N 16 2Bit No IRQ_EINT
+ * P 11 2Bit Yes 8
+ * Q 14 2Bit Yes None
+ * R 15 4Bit[2] Yes None
+ * S 8 2Bit Yes None
+ *
+ * [1] BANKF pins 14,15 do not form part of the external interrupt sources
+ * [2] BANK has two control registers, GPxCON0 and GPxCON1
+ */
+
+static struct samsung_gpio_chip s5p6450_gpios_4bit[] = {
+#ifdef CONFIG_CPU_S5P6450
+ {
+ .chip = {
+ .base = S5P6450_GPA(0),
+ .ngpio = S5P6450_GPIO_A_NR,
+ .label = "GPA",
+ },
+ }, {
+ .chip = {
+ .base = S5P6450_GPB(0),
+ .ngpio = S5P6450_GPIO_B_NR,
+ .label = "GPB",
+ },
+ }, {
+ .chip = {
+ .base = S5P6450_GPC(0),
+ .ngpio = S5P6450_GPIO_C_NR,
+ .label = "GPC",
+ },
+ }, {
+ .chip = {
+ .base = S5P6450_GPD(0),
+ .ngpio = S5P6450_GPIO_D_NR,
+ .label = "GPD",
+ },
+ }, {
+ .base = S5P6450_GPK_BASE,
+ .chip = {
+ .base = S5P6450_GPK(0),
+ .ngpio = S5P6450_GPIO_K_NR,
+ .label = "GPK",
+ },
+ },
+#endif
+};
+
+static struct samsung_gpio_chip s5p6450_gpios_4bit2[] = {
+#ifdef CONFIG_CPU_S5P6450
+ {
+ .base = S5P64X0_GPG_BASE + 0x4,
+ .chip = {
+ .base = S5P6450_GPG(0),
+ .ngpio = S5P6450_GPIO_G_NR,
+ .label = "GPG",
+ },
+ }, {
+ .base = S5P64X0_GPH_BASE + 0x4,
+ .chip = {
+ .base = S5P6450_GPH(0),
+ .ngpio = S5P6450_GPIO_H_NR,
+ .label = "GPH",
+ },
+ },
+#endif
+};
+
+static struct samsung_gpio_chip s5p6450_gpios_rbank[] = {
+#ifdef CONFIG_CPU_S5P6450
+ {
+ .base = S5P64X0_GPR_BASE + 0x4,
+ .config = &s5p64x0_gpio_cfg_rbank,
+ .chip = {
+ .base = S5P6450_GPR(0),
+ .ngpio = S5P6450_GPIO_R_NR,
+ .label = "GPR",
+ },
+ },
+#endif
+};
+
+static struct samsung_gpio_chip s5p6450_gpios_2bit[] = {
+#ifdef CONFIG_CPU_S5P6450
+ {
+ .base = S5P64X0_GPF_BASE,
+ .config = &samsung_gpio_cfgs[6],
+ .chip = {
+ .base = S5P6450_GPF(0),
+ .ngpio = S5P6450_GPIO_F_NR,
+ .label = "GPF",
+ },
+ }, {
+ .base = S5P64X0_GPI_BASE,
+ .config = &samsung_gpio_cfgs[4],
+ .chip = {
+ .base = S5P6450_GPI(0),
+ .ngpio = S5P6450_GPIO_I_NR,
+ .label = "GPI",
+ },
+ }, {
+ .base = S5P64X0_GPJ_BASE,
+ .config = &samsung_gpio_cfgs[4],
+ .chip = {
+ .base = S5P6450_GPJ(0),
+ .ngpio = S5P6450_GPIO_J_NR,
+ .label = "GPJ",
+ },
+ }, {
+ .base = S5P64X0_GPN_BASE,
+ .config = &samsung_gpio_cfgs[5],
+ .chip = {
+ .base = S5P6450_GPN(0),
+ .ngpio = S5P6450_GPIO_N_NR,
+ .label = "GPN",
+ },
+ }, {
+ .base = S5P64X0_GPP_BASE,
+ .config = &samsung_gpio_cfgs[6],
+ .chip = {
+ .base = S5P6450_GPP(0),
+ .ngpio = S5P6450_GPIO_P_NR,
+ .label = "GPP",
+ },
+ }, {
+ .base = S5P6450_GPQ_BASE,
+ .config = &samsung_gpio_cfgs[5],
+ .chip = {
+ .base = S5P6450_GPQ(0),
+ .ngpio = S5P6450_GPIO_Q_NR,
+ .label = "GPQ",
+ },
+ }, {
+ .base = S5P6450_GPS_BASE,
+ .config = &samsung_gpio_cfgs[6],
+ .chip = {
+ .base = S5P6450_GPS(0),
+ .ngpio = S5P6450_GPIO_S_NR,
+ .label = "GPS",
+ },
+ },
+#endif
+};
+
+/*
+ * S5PC100 GPIO bank summary:
+ *
+ * Bank GPIOs Style INT Type
+ * A0 8 4Bit GPIO_INT0
+ * A1 5 4Bit GPIO_INT1
+ * B 8 4Bit GPIO_INT2
+ * C 5 4Bit GPIO_INT3
+ * D 7 4Bit GPIO_INT4
+ * E0 8 4Bit GPIO_INT5
+ * E1 6 4Bit GPIO_INT6
+ * F0 8 4Bit GPIO_INT7
+ * F1 8 4Bit GPIO_INT8
+ * F2 8 4Bit GPIO_INT9
+ * F3 4 4Bit GPIO_INT10
+ * G0 8 4Bit GPIO_INT11
+ * G1 3 4Bit GPIO_INT12
+ * G2 7 4Bit GPIO_INT13
+ * G3 7 4Bit GPIO_INT14
+ * H0 8 4Bit WKUP_INT
+ * H1 8 4Bit WKUP_INT
+ * H2 8 4Bit WKUP_INT
+ * H3 8 4Bit WKUP_INT
+ * I 8 4Bit GPIO_INT15
+ * J0 8 4Bit GPIO_INT16
+ * J1 5 4Bit GPIO_INT17
+ * J2 8 4Bit GPIO_INT18
+ * J3 8 4Bit GPIO_INT19
+ * J4 4 4Bit GPIO_INT20
+ * K0 8 4Bit None
+ * K1 6 4Bit None
+ * K2 8 4Bit None
+ * K3 8 4Bit None
+ * L0 8 4Bit None
+ * L1 8 4Bit None
+ * L2 8 4Bit None
+ * L3 8 4Bit None
+ */
+
+static struct samsung_gpio_chip s5pc100_gpios_4bit[] = {
+#ifdef CONFIG_CPU_S5PC100
+ {
+ .chip = {
+ .base = S5PC100_GPA0(0),
+ .ngpio = S5PC100_GPIO_A0_NR,
+ .label = "GPA0",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPA1(0),
+ .ngpio = S5PC100_GPIO_A1_NR,
+ .label = "GPA1",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPB(0),
+ .ngpio = S5PC100_GPIO_B_NR,
+ .label = "GPB",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPC(0),
+ .ngpio = S5PC100_GPIO_C_NR,
+ .label = "GPC",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPD(0),
+ .ngpio = S5PC100_GPIO_D_NR,
+ .label = "GPD",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPE0(0),
+ .ngpio = S5PC100_GPIO_E0_NR,
+ .label = "GPE0",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPE1(0),
+ .ngpio = S5PC100_GPIO_E1_NR,
+ .label = "GPE1",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPF0(0),
+ .ngpio = S5PC100_GPIO_F0_NR,
+ .label = "GPF0",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPF1(0),
+ .ngpio = S5PC100_GPIO_F1_NR,
+ .label = "GPF1",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPF2(0),
+ .ngpio = S5PC100_GPIO_F2_NR,
+ .label = "GPF2",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPF3(0),
+ .ngpio = S5PC100_GPIO_F3_NR,
+ .label = "GPF3",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPG0(0),
+ .ngpio = S5PC100_GPIO_G0_NR,
+ .label = "GPG0",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPG1(0),
+ .ngpio = S5PC100_GPIO_G1_NR,
+ .label = "GPG1",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPG2(0),
+ .ngpio = S5PC100_GPIO_G2_NR,
+ .label = "GPG2",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPG3(0),
+ .ngpio = S5PC100_GPIO_G3_NR,
+ .label = "GPG3",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPI(0),
+ .ngpio = S5PC100_GPIO_I_NR,
+ .label = "GPI",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPJ0(0),
+ .ngpio = S5PC100_GPIO_J0_NR,
+ .label = "GPJ0",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPJ1(0),
+ .ngpio = S5PC100_GPIO_J1_NR,
+ .label = "GPJ1",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPJ2(0),
+ .ngpio = S5PC100_GPIO_J2_NR,
+ .label = "GPJ2",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPJ3(0),
+ .ngpio = S5PC100_GPIO_J3_NR,
+ .label = "GPJ3",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPJ4(0),
+ .ngpio = S5PC100_GPIO_J4_NR,
+ .label = "GPJ4",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPK0(0),
+ .ngpio = S5PC100_GPIO_K0_NR,
+ .label = "GPK0",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPK1(0),
+ .ngpio = S5PC100_GPIO_K1_NR,
+ .label = "GPK1",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPK2(0),
+ .ngpio = S5PC100_GPIO_K2_NR,
+ .label = "GPK2",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPK3(0),
+ .ngpio = S5PC100_GPIO_K3_NR,
+ .label = "GPK3",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPL0(0),
+ .ngpio = S5PC100_GPIO_L0_NR,
+ .label = "GPL0",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPL1(0),
+ .ngpio = S5PC100_GPIO_L1_NR,
+ .label = "GPL1",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPL2(0),
+ .ngpio = S5PC100_GPIO_L2_NR,
+ .label = "GPL2",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPL3(0),
+ .ngpio = S5PC100_GPIO_L3_NR,
+ .label = "GPL3",
+ },
+ }, {
+ .chip = {
+ .base = S5PC100_GPL4(0),
+ .ngpio = S5PC100_GPIO_L4_NR,
+ .label = "GPL4",
+ },
+ }, {
+ .base = (S5P_VA_GPIO + 0xC00),
+ .irq_base = IRQ_EINT(0),
+ .chip = {
+ .base = S5PC100_GPH0(0),
+ .ngpio = S5PC100_GPIO_H0_NR,
+ .label = "GPH0",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO + 0xC20),
+ .irq_base = IRQ_EINT(8),
+ .chip = {
+ .base = S5PC100_GPH1(0),
+ .ngpio = S5PC100_GPIO_H1_NR,
+ .label = "GPH1",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO + 0xC40),
+ .irq_base = IRQ_EINT(16),
+ .chip = {
+ .base = S5PC100_GPH2(0),
+ .ngpio = S5PC100_GPIO_H2_NR,
+ .label = "GPH2",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO + 0xC60),
+ .irq_base = IRQ_EINT(24),
+ .chip = {
+ .base = S5PC100_GPH3(0),
+ .ngpio = S5PC100_GPIO_H3_NR,
+ .label = "GPH3",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ },
+#endif
+};
+
+/*
+ * Followings are the gpio banks in S5PV210/S5PC110
+ *
+ * The 'config' member when left to NULL, is initialized to the default
+ * structure samsung_gpio_cfgs[3] in the init function below.
+ *
+ * The 'base' member is also initialized in the init function below.
+ * Note: The initialization of 'base' member of samsung_gpio_chip structure
+ * uses the above macro and depends on the banks being listed in order here.
+ */
+
+static struct samsung_gpio_chip s5pv210_gpios_4bit[] = {
+#ifdef CONFIG_CPU_S5PV210
+ {
+ .chip = {
+ .base = S5PV210_GPA0(0),
+ .ngpio = S5PV210_GPIO_A0_NR,
+ .label = "GPA0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPA1(0),
+ .ngpio = S5PV210_GPIO_A1_NR,
+ .label = "GPA1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPB(0),
+ .ngpio = S5PV210_GPIO_B_NR,
+ .label = "GPB",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPC0(0),
+ .ngpio = S5PV210_GPIO_C0_NR,
+ .label = "GPC0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPC1(0),
+ .ngpio = S5PV210_GPIO_C1_NR,
+ .label = "GPC1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPD0(0),
+ .ngpio = S5PV210_GPIO_D0_NR,
+ .label = "GPD0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPD1(0),
+ .ngpio = S5PV210_GPIO_D1_NR,
+ .label = "GPD1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPE0(0),
+ .ngpio = S5PV210_GPIO_E0_NR,
+ .label = "GPE0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPE1(0),
+ .ngpio = S5PV210_GPIO_E1_NR,
+ .label = "GPE1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPF0(0),
+ .ngpio = S5PV210_GPIO_F0_NR,
+ .label = "GPF0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPF1(0),
+ .ngpio = S5PV210_GPIO_F1_NR,
+ .label = "GPF1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPF2(0),
+ .ngpio = S5PV210_GPIO_F2_NR,
+ .label = "GPF2",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPF3(0),
+ .ngpio = S5PV210_GPIO_F3_NR,
+ .label = "GPF3",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPG0(0),
+ .ngpio = S5PV210_GPIO_G0_NR,
+ .label = "GPG0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPG1(0),
+ .ngpio = S5PV210_GPIO_G1_NR,
+ .label = "GPG1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPG2(0),
+ .ngpio = S5PV210_GPIO_G2_NR,
+ .label = "GPG2",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPG3(0),
+ .ngpio = S5PV210_GPIO_G3_NR,
+ .label = "GPG3",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPI(0),
+ .ngpio = S5PV210_GPIO_I_NR,
+ .label = "GPI",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPJ0(0),
+ .ngpio = S5PV210_GPIO_J0_NR,
+ .label = "GPJ0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPJ1(0),
+ .ngpio = S5PV210_GPIO_J1_NR,
+ .label = "GPJ1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPJ2(0),
+ .ngpio = S5PV210_GPIO_J2_NR,
+ .label = "GPJ2",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPJ3(0),
+ .ngpio = S5PV210_GPIO_J3_NR,
+ .label = "GPJ3",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPJ4(0),
+ .ngpio = S5PV210_GPIO_J4_NR,
+ .label = "GPJ4",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_MP01(0),
+ .ngpio = S5PV210_GPIO_MP01_NR,
+ .label = "MP01",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_MP02(0),
+ .ngpio = S5PV210_GPIO_MP02_NR,
+ .label = "MP02",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_MP03(0),
+ .ngpio = S5PV210_GPIO_MP03_NR,
+ .label = "MP03",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_MP04(0),
+ .ngpio = S5PV210_GPIO_MP04_NR,
+ .label = "MP04",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_MP05(0),
+ .ngpio = S5PV210_GPIO_MP05_NR,
+ .label = "MP05",
+ },
+ }, {
+ .base = (S5P_VA_GPIO + 0xC00),
+ .irq_base = IRQ_EINT(0),
+ .chip = {
+ .base = S5PV210_GPH0(0),
+ .ngpio = S5PV210_GPIO_H0_NR,
+ .label = "GPH0",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO + 0xC20),
+ .irq_base = IRQ_EINT(8),
+ .chip = {
+ .base = S5PV210_GPH1(0),
+ .ngpio = S5PV210_GPIO_H1_NR,
+ .label = "GPH1",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO + 0xC40),
+ .irq_base = IRQ_EINT(16),
+ .chip = {
+ .base = S5PV210_GPH2(0),
+ .ngpio = S5PV210_GPIO_H2_NR,
+ .label = "GPH2",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO + 0xC60),
+ .irq_base = IRQ_EINT(24),
+ .chip = {
+ .base = S5PV210_GPH3(0),
+ .ngpio = S5PV210_GPIO_H3_NR,
+ .label = "GPH3",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ },
+#endif
+};
+
+/*
+ * Followings are the gpio banks in EXYNOS4210
+ *
+ * The 'config' member when left to NULL, is initialized to the default
+ * structure samsung_gpio_cfgs[3] in the init function below.
+ *
+ * The 'base' member is also initialized in the init function below.
+ * Note: The initialization of 'base' member of samsung_gpio_chip structure
+ * uses the above macro and depends on the banks being listed in order here.
+ */
+
+static struct samsung_gpio_chip exynos4_gpios_1[] = {
+#ifdef CONFIG_ARCH_EXYNOS4
+ {
+ .chip = {
+ .base = EXYNOS4_GPA0(0),
+ .ngpio = EXYNOS4_GPIO_A0_NR,
+ .label = "GPA0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPA1(0),
+ .ngpio = EXYNOS4_GPIO_A1_NR,
+ .label = "GPA1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPB(0),
+ .ngpio = EXYNOS4_GPIO_B_NR,
+ .label = "GPB",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPC0(0),
+ .ngpio = EXYNOS4_GPIO_C0_NR,
+ .label = "GPC0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPC1(0),
+ .ngpio = EXYNOS4_GPIO_C1_NR,
+ .label = "GPC1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPD0(0),
+ .ngpio = EXYNOS4_GPIO_D0_NR,
+ .label = "GPD0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPD1(0),
+ .ngpio = EXYNOS4_GPIO_D1_NR,
+ .label = "GPD1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPE0(0),
+ .ngpio = EXYNOS4_GPIO_E0_NR,
+ .label = "GPE0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPE1(0),
+ .ngpio = EXYNOS4_GPIO_E1_NR,
+ .label = "GPE1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPE2(0),
+ .ngpio = EXYNOS4_GPIO_E2_NR,
+ .label = "GPE2",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPE3(0),
+ .ngpio = EXYNOS4_GPIO_E3_NR,
+ .label = "GPE3",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPE4(0),
+ .ngpio = EXYNOS4_GPIO_E4_NR,
+ .label = "GPE4",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPF0(0),
+ .ngpio = EXYNOS4_GPIO_F0_NR,
+ .label = "GPF0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPF1(0),
+ .ngpio = EXYNOS4_GPIO_F1_NR,
+ .label = "GPF1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPF2(0),
+ .ngpio = EXYNOS4_GPIO_F2_NR,
+ .label = "GPF2",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPF3(0),
+ .ngpio = EXYNOS4_GPIO_F3_NR,
+ .label = "GPF3",
+ },
+ },
+#endif
+};
+
+static struct samsung_gpio_chip exynos4_gpios_2[] = {
+#ifdef CONFIG_ARCH_EXYNOS4
+ {
+ .chip = {
+ .base = EXYNOS4_GPJ0(0),
+ .ngpio = EXYNOS4_GPIO_J0_NR,
+ .label = "GPJ0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPJ1(0),
+ .ngpio = EXYNOS4_GPIO_J1_NR,
+ .label = "GPJ1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPK0(0),
+ .ngpio = EXYNOS4_GPIO_K0_NR,
+ .label = "GPK0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPK1(0),
+ .ngpio = EXYNOS4_GPIO_K1_NR,
+ .label = "GPK1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPK2(0),
+ .ngpio = EXYNOS4_GPIO_K2_NR,
+ .label = "GPK2",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPK3(0),
+ .ngpio = EXYNOS4_GPIO_K3_NR,
+ .label = "GPK3",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPL0(0),
+ .ngpio = EXYNOS4_GPIO_L0_NR,
+ .label = "GPL0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPL1(0),
+ .ngpio = EXYNOS4_GPIO_L1_NR,
+ .label = "GPL1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPL2(0),
+ .ngpio = EXYNOS4_GPIO_L2_NR,
+ .label = "GPL2",
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[8],
+ .chip = {
+ .base = EXYNOS4_GPY0(0),
+ .ngpio = EXYNOS4_GPIO_Y0_NR,
+ .label = "GPY0",
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[8],
+ .chip = {
+ .base = EXYNOS4_GPY1(0),
+ .ngpio = EXYNOS4_GPIO_Y1_NR,
+ .label = "GPY1",
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[8],
+ .chip = {
+ .base = EXYNOS4_GPY2(0),
+ .ngpio = EXYNOS4_GPIO_Y2_NR,
+ .label = "GPY2",
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[8],
+ .chip = {
+ .base = EXYNOS4_GPY3(0),
+ .ngpio = EXYNOS4_GPIO_Y3_NR,
+ .label = "GPY3",
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[8],
+ .chip = {
+ .base = EXYNOS4_GPY4(0),
+ .ngpio = EXYNOS4_GPIO_Y4_NR,
+ .label = "GPY4",
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[8],
+ .chip = {
+ .base = EXYNOS4_GPY5(0),
+ .ngpio = EXYNOS4_GPIO_Y5_NR,
+ .label = "GPY5",
+ },
+ }, {
+ .config = &samsung_gpio_cfgs[8],
+ .chip = {
+ .base = EXYNOS4_GPY6(0),
+ .ngpio = EXYNOS4_GPIO_Y6_NR,
+ .label = "GPY6",
+ },
+ }, {
+ .base = (S5P_VA_GPIO2 + 0xC00),
+ .config = &samsung_gpio_cfgs[9],
+ .irq_base = IRQ_EINT(0),
+ .chip = {
+ .base = EXYNOS4_GPX0(0),
+ .ngpio = EXYNOS4_GPIO_X0_NR,
+ .label = "GPX0",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO2 + 0xC20),
+ .config = &samsung_gpio_cfgs[9],
+ .irq_base = IRQ_EINT(8),
+ .chip = {
+ .base = EXYNOS4_GPX1(0),
+ .ngpio = EXYNOS4_GPIO_X1_NR,
+ .label = "GPX1",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO2 + 0xC40),
+ .config = &samsung_gpio_cfgs[9],
+ .irq_base = IRQ_EINT(16),
+ .chip = {
+ .base = EXYNOS4_GPX2(0),
+ .ngpio = EXYNOS4_GPIO_X2_NR,
+ .label = "GPX2",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO2 + 0xC60),
+ .config = &samsung_gpio_cfgs[9],
+ .irq_base = IRQ_EINT(24),
+ .chip = {
+ .base = EXYNOS4_GPX3(0),
+ .ngpio = EXYNOS4_GPIO_X3_NR,
+ .label = "GPX3",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ },
+#endif
+};
+
+static struct samsung_gpio_chip exynos4_gpios_3[] = {
+#ifdef CONFIG_ARCH_EXYNOS4
+ {
+ .chip = {
+ .base = EXYNOS4_GPZ(0),
+ .ngpio = EXYNOS4_GPIO_Z_NR,
+ .label = "GPZ",
+ },
+ },
+#endif
+};
+
+/* TODO: cleanup soc_is_* */
+static __init int samsung_gpiolib_init(void)
+{
+ struct samsung_gpio_chip *chip;
+ int i, nr_chips;
+ int group = 0;
+
+ samsung_gpiolib_set_cfg(samsung_gpio_cfgs, ARRAY_SIZE(samsung_gpio_cfgs));
+
+ if (soc_is_s3c24xx()) {
+ s3c24xx_gpiolib_add_chips(s3c24xx_gpios,
+ ARRAY_SIZE(s3c24xx_gpios), S3C24XX_VA_GPIO);
+ } else if (soc_is_s3c64xx()) {
+ samsung_gpiolib_add_2bit_chips(s3c64xx_gpios_2bit,
+ ARRAY_SIZE(s3c64xx_gpios_2bit),
+ S3C64XX_VA_GPIO + 0xE0, 0x20);
+ samsung_gpiolib_add_4bit_chips(s3c64xx_gpios_4bit,
+ ARRAY_SIZE(s3c64xx_gpios_4bit),
+ S3C64XX_VA_GPIO);
+ samsung_gpiolib_add_4bit2_chips(s3c64xx_gpios_4bit2,
+ ARRAY_SIZE(s3c64xx_gpios_4bit2));
+ } else if (soc_is_s5p6440()) {
+ samsung_gpiolib_add_2bit_chips(s5p6440_gpios_2bit,
+ ARRAY_SIZE(s5p6440_gpios_2bit), NULL, 0x0);
+ samsung_gpiolib_add_4bit_chips(s5p6440_gpios_4bit,
+ ARRAY_SIZE(s5p6440_gpios_4bit), S5P_VA_GPIO);
+ samsung_gpiolib_add_4bit2_chips(s5p6440_gpios_4bit2,
+ ARRAY_SIZE(s5p6440_gpios_4bit2));
+ s5p64x0_gpiolib_add_rbank(s5p6440_gpios_rbank,
+ ARRAY_SIZE(s5p6440_gpios_rbank));
+ } else if (soc_is_s5p6450()) {
+ samsung_gpiolib_add_2bit_chips(s5p6450_gpios_2bit,
+ ARRAY_SIZE(s5p6450_gpios_2bit), NULL, 0x0);
+ samsung_gpiolib_add_4bit_chips(s5p6450_gpios_4bit,
+ ARRAY_SIZE(s5p6450_gpios_4bit), S5P_VA_GPIO);
+ samsung_gpiolib_add_4bit2_chips(s5p6450_gpios_4bit2,
+ ARRAY_SIZE(s5p6450_gpios_4bit2));
+ s5p64x0_gpiolib_add_rbank(s5p6450_gpios_rbank,
+ ARRAY_SIZE(s5p6450_gpios_rbank));
+ } else if (soc_is_s5pc100()) {
+ group = 0;
+ chip = s5pc100_gpios_4bit;
+ nr_chips = ARRAY_SIZE(s5pc100_gpios_4bit);
+
+ for (i = 0; i < nr_chips; i++, chip++) {
+ if (!chip->config) {
+ chip->config = &samsung_gpio_cfgs[3];
+ chip->group = group++;
+ }
+ }
+ samsung_gpiolib_add_4bit_chips(s5pc100_gpios_4bit, nr_chips, S5P_VA_GPIO);
+#if defined(CONFIG_CPU_S5PC100) && defined(CONFIG_S5P_GPIO_INT)
+ s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
+#endif
+ } else if (soc_is_s5pv210()) {
+ group = 0;
+ chip = s5pv210_gpios_4bit;
+ nr_chips = ARRAY_SIZE(s5pv210_gpios_4bit);
+
+ for (i = 0; i < nr_chips; i++, chip++) {
+ if (!chip->config) {
+ chip->config = &samsung_gpio_cfgs[3];
+ chip->group = group++;
+ }
+ }
+ samsung_gpiolib_add_4bit_chips(s5pv210_gpios_4bit, nr_chips, S5P_VA_GPIO);
+#if defined(CONFIG_CPU_S5PV210) && defined(CONFIG_S5P_GPIO_INT)
+ s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
+#endif
+ } else if (soc_is_exynos4210()) {
+ group = 0;
+
+ /* gpio part1 */
+ chip = exynos4_gpios_1;
+ nr_chips = ARRAY_SIZE(exynos4_gpios_1);
+
+ for (i = 0; i < nr_chips; i++, chip++) {
+ if (!chip->config) {
+ chip->config = &exynos4_gpio_cfg;
+ chip->group = group++;
+ }
+ }
+ samsung_gpiolib_add_4bit_chips(exynos4_gpios_1, nr_chips, S5P_VA_GPIO1);
+
+ /* gpio part2 */
+ chip = exynos4_gpios_2;
+ nr_chips = ARRAY_SIZE(exynos4_gpios_2);
+
+ for (i = 0; i < nr_chips; i++, chip++) {
+ if (!chip->config) {
+ chip->config = &exynos4_gpio_cfg;
+ chip->group = group++;
+ }
+ }
+ samsung_gpiolib_add_4bit_chips(exynos4_gpios_2, nr_chips, S5P_VA_GPIO2);
+
+ /* gpio part3 */
+ chip = exynos4_gpios_3;
+ nr_chips = ARRAY_SIZE(exynos4_gpios_3);
+
+ for (i = 0; i < nr_chips; i++, chip++) {
+ if (!chip->config) {
+ chip->config = &exynos4_gpio_cfg;
+ chip->group = group++;
+ }
+ }
+ samsung_gpiolib_add_4bit_chips(exynos4_gpios_3, nr_chips, S5P_VA_GPIO3);
+
+#if defined(CONFIG_CPU_EXYNOS4210) && defined(CONFIG_S5P_GPIO_INT)
+ s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS);
+ s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS);
+#endif
+ } else {
+ WARN(1, "Unknown SoC in gpio-samsung, no GPIOs added\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+core_initcall(samsung_gpiolib_init);
+
+int s3c_gpio_cfgpin(unsigned int pin, unsigned int config)
+{
+ struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+ unsigned long flags;
+ int offset;
+ int ret;
+
+ if (!chip)
+ return -EINVAL;
+
+ offset = pin - chip->chip.base;
+
+ samsung_gpio_lock(chip, flags);
+ ret = samsung_gpio_do_setcfg(chip, offset, config);
+ samsung_gpio_unlock(chip, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(s3c_gpio_cfgpin);
+
+int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
+ unsigned int cfg)
+{
+ int ret;
+
+ for (; nr > 0; nr--, start++) {
+ ret = s3c_gpio_cfgpin(start, cfg);
+ if (ret != 0)
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_gpio_cfgpin_range);
+
+int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
+ unsigned int cfg, samsung_gpio_pull_t pull)
+{
+ int ret;
+
+ for (; nr > 0; nr--, start++) {
+ s3c_gpio_setpull(start, pull);
+ ret = s3c_gpio_cfgpin(start, cfg);
+ if (ret != 0)
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range);
+
+unsigned s3c_gpio_getcfg(unsigned int pin)
+{
+ struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+ unsigned long flags;
+ unsigned ret = 0;
+ int offset;
+
+ if (chip) {
+ offset = pin - chip->chip.base;
+
+ samsung_gpio_lock(chip, flags);
+ ret = samsung_gpio_do_getcfg(chip, offset);
+ samsung_gpio_unlock(chip, flags);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(s3c_gpio_getcfg);
+
+int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull)
+{
+ struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+ unsigned long flags;
+ int offset, ret;
+
+ if (!chip)
+ return -EINVAL;
+
+ offset = pin - chip->chip.base;
+
+ samsung_gpio_lock(chip, flags);
+ ret = samsung_gpio_do_setpull(chip, offset, pull);
+ samsung_gpio_unlock(chip, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(s3c_gpio_setpull);
+
+samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin)
+{
+ struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+ unsigned long flags;
+ int offset;
+ u32 pup = 0;
+
+ if (chip) {
+ offset = pin - chip->chip.base;
+
+ samsung_gpio_lock(chip, flags);
+ pup = samsung_gpio_do_getpull(chip, offset);
+ samsung_gpio_unlock(chip, flags);
+ }
+
+ return (__force samsung_gpio_pull_t)pup;
+}
+EXPORT_SYMBOL(s3c_gpio_getpull);
+
+/* gpiolib wrappers until these are totally eliminated */
+
+void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
+{
+ int ret;
+
+ WARN_ON(to); /* should be none of these left */
+
+ if (!to) {
+ /* if pull is enabled, try first with up, and if that
+ * fails, try using down */
+
+ ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP);
+ if (ret)
+ s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN);
+ } else {
+ s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE);
+ }
+}
+EXPORT_SYMBOL(s3c2410_gpio_pullup);
+
+void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
+{
+ /* do this via gpiolib until all users removed */
+
+ gpio_request(pin, "temporary");
+ gpio_set_value(pin, to);
+ gpio_free(pin);
+}
+EXPORT_SYMBOL(s3c2410_gpio_setpin);
+
+unsigned int s3c2410_gpio_getpin(unsigned int pin)
+{
+ struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+ unsigned long offs = pin - chip->chip.base;
+
+ return __raw_readl(chip->base + 0x04) & (1 << offs);
+}
+EXPORT_SYMBOL(s3c2410_gpio_getpin);
+
+#ifdef CONFIG_S5P_GPIO_DRVSTR
+s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
+{
+ struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+ unsigned int off;
+ void __iomem *reg;
+ int shift;
+ u32 drvstr;
+
+ if (!chip)
+ return -EINVAL;
+
+ off = pin - chip->chip.base;
+ shift = off * 2;
+ reg = chip->base + 0x0C;
+
+ drvstr = __raw_readl(reg);
+ drvstr = drvstr >> shift;
+ drvstr &= 0x3;
+
+ return (__force s5p_gpio_drvstr_t)drvstr;
+}
+EXPORT_SYMBOL(s5p_gpio_get_drvstr);
+
+int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr)
+{
+ struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+ unsigned int off;
+ void __iomem *reg;
+ int shift;
+ u32 tmp;
+
+ if (!chip)
+ return -EINVAL;
+
+ off = pin - chip->chip.base;
+ shift = off * 2;
+ reg = chip->base + 0x0C;
+
+ tmp = __raw_readl(reg);
+ tmp &= ~(0x3 << shift);
+ tmp |= drvstr << shift;
+
+ __raw_writel(tmp, reg);
+
+ return 0;
+}
+EXPORT_SYMBOL(s5p_gpio_set_drvstr);
+#endif /* CONFIG_S5P_GPIO_DRVSTR */
+
+#ifdef CONFIG_PLAT_S3C24XX
+unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
+{
+ unsigned long flags;
+ unsigned long misccr;
+
+ local_irq_save(flags);
+ misccr = __raw_readl(S3C24XX_MISCCR);
+ misccr &= ~clear;
+ misccr ^= change;
+ __raw_writel(misccr, S3C24XX_MISCCR);
+ local_irq_restore(flags);
+
+ return misccr;
+}
+EXPORT_SYMBOL(s3c2410_modify_misccr);
+#endif
#include <linux/init.h>
#include <linux/errno.h>
+#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
#include <linux/of_gpio.h>
depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU
select I2C
select I2C_ALGOBIT
- select SLOW_WORK
help
Kernel-level support for the Direct Rendering Infrastructure (DRI)
introduced in XFree86 4.0. If you say Y here, you need to select
select FB_CFB_IMAGEBLIT
# i915 depends on ACPI_VIDEO when ACPI is enabled
# but for select to work, need to select ACPI_VIDEO's dependencies, ick
+ select BACKLIGHT_LCD_SUPPORT if ACPI
select BACKLIGHT_CLASS_DEVICE if ACPI
select VIDEO_OUTPUT_CONTROL if ACPI
select INPUT if ACPI
* DEALINGS IN THE SOFTWARE.
*/
+#include <linux/export.h>
#include "drmP.h"
# define ATI_PCIGART_PAGE_SIZE 4096 /**< PCI GART page size */
* Pauli Nieminen <suokkos-at-gmail-dot-com>
*/
+#include <linux/export.h>
#include "drm_buffer.h"
/**
#include <linux/vmalloc.h>
#include <linux/slab.h>
#include <linux/log2.h>
+#include <linux/export.h>
#include <asm/shmparam.h>
#include "drmP.h"
* Authors: Thomas Hellström <thomas-at-tungstengraphics-dot-com>
*/
+#include <linux/export.h>
#include "drmP.h"
#if defined(CONFIG_X86)
*/
#include <linux/list.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include "drm.h"
#include "drmP.h"
#include "drm_crtc.h"
{ DRM_MODE_CONNECTOR_HDMIB, "HDMI-B", 0 },
{ DRM_MODE_CONNECTOR_TV, "TV", 0 },
{ DRM_MODE_CONNECTOR_eDP, "eDP", 0 },
+ { DRM_MODE_CONNECTOR_VIRTUAL, "Virtual", 0},
};
static struct drm_prop_enum_list drm_encoder_enum_list[] =
{ DRM_MODE_ENCODER_TMDS, "TMDS" },
{ DRM_MODE_ENCODER_LVDS, "LVDS" },
{ DRM_MODE_ENCODER_TVDAC, "TV" },
+ { DRM_MODE_ENCODER_VIRTUAL, "Virtual" },
};
char *drm_get_encoder_name(struct drm_encoder *encoder)
list_add_tail(&connector->head, &dev->mode_config.connector_list);
dev->mode_config.num_connector++;
- drm_connector_attach_property(connector,
- dev->mode_config.edid_property, 0);
+ if (connector_type != DRM_MODE_CONNECTOR_VIRTUAL)
+ drm_connector_attach_property(connector,
+ dev->mode_config.edid_property,
+ 0);
drm_connector_attach_property(connector,
dev->mode_config.dpms_property, 0);
property->num_values = num_values;
INIT_LIST_HEAD(&property->enum_blob_list);
- if (name)
+ if (name) {
strncpy(property->name, name, DRM_PROP_NAME_LEN);
+ property->name[DRM_PROP_NAME_LEN-1] = '\0';
+ }
list_add_tail(&property->head, &dev->mode_config.property_list);
return property;
* Jesse Barnes <jesse.barnes@intel.com>
*/
+#include <linux/export.h>
+#include <linux/moduleparam.h>
+
#include "drmP.h"
#include "drm_crtc.h"
#include "drm_crtc_helper.h"
struct drm_connector *save_connectors, *connector;
int count = 0, ro, fail = 0;
struct drm_crtc_helper_funcs *crtc_funcs;
+ struct drm_mode_set save_set;
int ret = 0;
int i;
save_connectors[count++] = *connector;
}
+ save_set.crtc = set->crtc;
+ save_set.mode = &set->crtc->mode;
+ save_set.x = set->crtc->x;
+ save_set.y = set->crtc->y;
+ save_set.fb = set->crtc->fb;
+
/* We should be able to check here if the fb has the same properties
* and then just flip_or_move it */
if (set->crtc->fb != set->fb) {
*connector = save_connectors[count++];
}
+ /* Try to restore the config */
+ if (mode_changed &&
+ !drm_crtc_helper_set_mode(save_set.crtc, save_set.mode, save_set.x,
+ save_set.y, save_set.fb))
+ DRM_ERROR("failed to restore config after modeset failure\n");
+
kfree(save_connectors);
kfree(save_encoders);
kfree(save_crtcs);
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include "drmP.h"
#if defined(CONFIG_DEBUG_FS)
tmp->minor = minor;
tmp->dent = ent;
tmp->info_ent = &files[i];
- list_add(&(tmp->list), &(minor->debugfs_nodes.list));
+
+ mutex_lock(&minor->debugfs_lock);
+ list_add(&tmp->list, &minor->debugfs_list);
+ mutex_unlock(&minor->debugfs_lock);
}
return 0;
char name[64];
int ret;
- INIT_LIST_HEAD(&minor->debugfs_nodes.list);
+ INIT_LIST_HEAD(&minor->debugfs_list);
+ mutex_init(&minor->debugfs_lock);
sprintf(name, "%d", minor_id);
minor->debugfs_root = debugfs_create_dir(name, root);
if (!minor->debugfs_root) {
struct drm_info_node *tmp;
int i;
+ mutex_lock(&minor->debugfs_lock);
for (i = 0; i < count; i++) {
- list_for_each_safe(pos, q, &minor->debugfs_nodes.list) {
+ list_for_each_safe(pos, q, &minor->debugfs_list) {
tmp = list_entry(pos, struct drm_info_node, list);
if (tmp->info_ent == &files[i]) {
debugfs_remove(tmp->dent);
}
}
}
+ mutex_unlock(&minor->debugfs_lock);
return 0;
}
EXPORT_SYMBOL(drm_debugfs_remove_files);
* OTHER DEALINGS IN THE SOFTWARE.
*/
+#include <linux/export.h>
#include "drmP.h"
/**
#include <linux/debugfs.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include "drmP.h"
#include "drm_core.h"
DRM_IOCTL_DEF(DRM_IOCTL_SG_ALLOC, drm_sg_alloc_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
DRM_IOCTL_DEF(DRM_IOCTL_SG_FREE, drm_sg_free, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
- DRM_IOCTL_DEF(DRM_IOCTL_WAIT_VBLANK, drm_wait_vblank, 0),
+ DRM_IOCTL_DEF(DRM_IOCTL_WAIT_VBLANK, drm_wait_vblank, DRM_UNLOCKED),
DRM_IOCTL_DEF(DRM_IOCTL_MODESET_CTL, drm_modeset_ctl, 0),
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/i2c.h>
+#include <linux/export.h>
#include "drmP.h"
#include "drm_edid.h"
#include "drm_edid_modes.h"
*
*/
+#include <linux/module.h>
+
#include "drm_encoder_slave.h"
/**
#include <linux/sysrq.h>
#include <linux/slab.h>
#include <linux/fb.h>
+#include <linux/module.h>
#include "drmP.h"
#include "drm_crtc.h"
#include "drm_fb_helper.h"
#include "drmP.h"
#include <linux/poll.h>
#include <linux/slab.h>
+#include <linux/module.h>
/* from BKL pushdown: note that nothing else serializes idr_find() */
DEFINE_MUTEX(drm_global_mutex);
#include "drm_hashtab.h"
#include <linux/hash.h>
#include <linux/slab.h>
+#include <linux/export.h>
int drm_ht_create(struct drm_open_hash *ht, unsigned int order)
{
*/
#include <linux/compat.h>
#include <linux/ratelimit.h>
+#include <linux/export.h>
#include "drmP.h"
#include "drm_core.h"
#include <linux/slab.h>
#include <linux/vgaarb.h>
+#include <linux/export.h>
/* Access macro for slots in vblank timestamp ringbuffer. */
#define vblanktimestamp(dev, crtc, count) ( \
/* Prevent vblank irq processing while disabling vblank irqs,
* so no updates of timestamps or count can happen after we've
* disabled. Needed to prevent races in case of delayed irq's.
- * Disable preemption, so vblank_time_lock is held as short as
- * possible, even under a kernel with PREEMPT_RT patches.
*/
- preempt_disable();
spin_lock_irqsave(&dev->vblank_time_lock, irqflags);
dev->driver->disable_vblank(dev, crtc);
clear_vblank_timestamps(dev, crtc);
spin_unlock_irqrestore(&dev->vblank_time_lock, irqflags);
- preempt_enable();
}
static void vblank_disable_fn(unsigned long arg)
/*
* Wake up any waiters so they don't hang.
*/
- spin_lock_irqsave(&dev->vbl_lock, irqflags);
- for (i = 0; i < dev->num_crtcs; i++) {
- DRM_WAKEUP(&dev->vbl_queue[i]);
- dev->vblank_enabled[i] = 0;
- dev->last_vblank[i] = dev->driver->get_vblank_counter(dev, i);
+ if (dev->num_crtcs) {
+ spin_lock_irqsave(&dev->vbl_lock, irqflags);
+ for (i = 0; i < dev->num_crtcs; i++) {
+ DRM_WAKEUP(&dev->vbl_queue[i]);
+ dev->vblank_enabled[i] = 0;
+ dev->last_vblank[i] =
+ dev->driver->get_vblank_counter(dev, i);
+ }
+ spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
}
- spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
if (!irq_enabled)
return -EINVAL;
spin_lock_irqsave(&dev->vbl_lock, irqflags);
/* Going from 0->1 means we have to enable interrupts again */
if (atomic_add_return(1, &dev->vblank_refcount[crtc]) == 1) {
- /* Disable preemption while holding vblank_time_lock. Do
- * it explicitely to guard against PREEMPT_RT kernel.
- */
- preempt_disable();
spin_lock_irqsave(&dev->vblank_time_lock, irqflags2);
if (!dev->vblank_enabled[crtc]) {
/* Enable vblank irqs under vblank_time_lock protection.
}
}
spin_unlock_irqrestore(&dev->vblank_time_lock, irqflags2);
- preempt_enable();
} else {
if (!dev->vblank_enabled[crtc]) {
atomic_dec(&dev->vblank_refcount[crtc]);
trace_drm_vblank_event_delivered(current->pid, pipe,
vblwait->request.sequence);
} else {
+ /* drm_handle_vblank_events will call drm_vblank_put */
list_add_tail(&e->base.link, &dev->vblank_event_list);
vblwait->reply.sequence = vblwait->request.sequence;
}
goto done;
}
- if (flags & _DRM_VBLANK_EVENT)
+ if (flags & _DRM_VBLANK_EVENT) {
+ /* must hold on to the vblank ref until the event fires
+ * drm_vblank_put will be called asynchronously
+ */
return drm_queue_vblank_event(dev, crtc, vblwait, file_priv);
+ }
if ((flags & _DRM_VBLANK_NEXTONMISS) &&
(seq - vblwait->request.sequence) <= (1<<23)) {
*/
#include <linux/highmem.h>
+#include <linux/export.h>
#include "drmP.h"
/**
#include "drm_mm.h"
#include <linux/slab.h>
#include <linux/seq_file.h>
+#include <linux/export.h>
#define MM_UNUSED_TARGET 4
#include <linux/list.h>
#include <linux/list_sort.h>
+#include <linux/export.h>
#include "drmP.h"
#include "drm.h"
#include "drm_crtc.h"
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/dma-mapping.h>
+#include <linux/export.h>
#include "drmP.h"
/**********************************************************************/
* WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/
+#include <linux/export.h>
#include "drmP.h"
/**
#include <linux/seq_file.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include "drmP.h"
/***************************************************
* Thomas Hellström <thomas-at-tungstengraphics-dot-com>
*/
+#include <linux/export.h>
#include "drm_sman.h"
struct drm_owner_item {
#include <linux/kdev_t.h>
#include <linux/gfp.h>
#include <linux/err.h>
+#include <linux/export.h>
#include "drm_sysfs.h"
#include "drm_core.h"
#include "drmP.h"
#include <linux/usb.h>
+#include <linux/export.h>
#ifdef CONFIG_USB
int drm_get_usb_dev(struct usb_interface *interface,
*/
#include "drmP.h"
+#include <linux/export.h>
#if defined(__ia64__)
#include <linux/efi.h>
#include <linux/slab.h>
*
*/
+#include <linux/module.h>
+
#include "ch7006_priv.h"
/* DRM encoder functions */
*
*/
+#include <linux/module.h>
+
#include "drmP.h"
#include "drm_crtc_helper.h"
#include "drm_encoder_slave.h"
* Gareth Hughes <gareth@valinux.com>
*/
+#include <linux/module.h>
+
#include "drmP.h"
#include "drm.h"
#include "i810_drm.h"
#include <linux/seq_file.h>
#include <linux/debugfs.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include "drmP.h"
#include "drm.h"
#include "intel_drv.h"
node->minor = minor;
node->dent = ent;
node->info_ent = (void *) key;
- list_add(&node->list, &minor->debugfs_nodes.list);
+
+ mutex_lock(&minor->debugfs_lock);
+ list_add(&node->list, &minor->debugfs_list);
+ mutex_unlock(&minor->debugfs_lock);
return 0;
}
#include <linux/pnp.h>
#include <linux/vga_switcheroo.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <acpi/video.h>
static void i915_write_hws_pga(struct drm_device *dev)
#include "intel_drv.h"
#include <linux/console.h>
+#include <linux/module.h>
#include "drm_crtc_helper.h"
static int i915_modeset __read_mostly = -1;
};
static struct drm_driver driver = {
- /* don't use mtrr's here, the Xserver or user space app should
- * deal with them for intel hardware.
+ /* Don't use MTRRs here; the Xserver or userspace app should
+ * deal with them for Intel hardware.
*/
.driver_features =
DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | /* DRIVER_USE_MTRR |*/
if (obj->base.size > dev_priv->mm.gtt_mappable_end) {
ret = -E2BIG;
- goto unlock;
+ goto out;
}
if (obj->madv != I915_MADV_WILLNEED) {
#include <linux/i2c.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include "drmP.h"
#include "drm.h"
#include "drm_crtc.h"
*/
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
+#include <linux/export.h>
#include "drmP.h"
#include "drm.h"
#include "intel_drv.h"
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/delay.h>
+#include <linux/export.h>
#include "drmP.h"
#include "drm.h"
#include "drm_crtc.h"
* Gareth Hughes <gareth@valinux.com>
*/
+#include <linux/module.h>
+
#include "drmP.h"
#include "drm.h"
#include "mga_drm.h"
#include <linux/firmware.h>
#include <linux/ihex.h>
#include <linux/platform_device.h>
+#include <linux/module.h>
#include "drmP.h"
#include "drm.h"
nv50_pll_set(struct drm_device *dev, uint32_t reg, uint32_t clk)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
- uint32_t reg0 = nv_rd32(dev, reg + 0);
- uint32_t reg1 = nv_rd32(dev, reg + 4);
struct nouveau_pll_vals pll;
struct pll_lims pll_limits;
+ u32 ctrl, mask, coef;
int ret;
ret = get_pll_limits(dev, reg, &pll_limits);
if (!clk)
return -ERANGE;
- reg0 = (reg0 & 0xfff8ffff) | (pll.log2P << 16);
- reg1 = (reg1 & 0xffff0000) | (pll.N1 << 8) | pll.M1;
-
- if (dev_priv->vbios.execute) {
- still_alive();
- nv_wr32(dev, reg + 4, reg1);
- nv_wr32(dev, reg + 0, reg0);
+ coef = pll.N1 << 8 | pll.M1;
+ ctrl = pll.log2P << 16;
+ mask = 0x00070000;
+ if (reg == 0x004008) {
+ mask |= 0x01f80000;
+ ctrl |= (pll_limits.log2p_bias << 19);
+ ctrl |= (pll.log2P << 22);
}
+ if (!dev_priv->vbios.execute)
+ return 0;
+
+ nv_mask(dev, reg + 0, mask, ctrl);
+ nv_wr32(dev, reg + 4, coef);
return 0;
}
if (dev_priv->card_type == NV_10 &&
nvbo->tile_mode && (type & TTM_PL_FLAG_VRAM) &&
- nvbo->bo.mem.num_pages < vram_pages / 2) {
+ nvbo->bo.mem.num_pages < vram_pages / 4) {
/*
* Make sure that the color and depth buffers are handled
* by independent memory controller units. Up to a 9x
INIT_LIST_HEAD(&chan->nvsw.vbl_wait);
INIT_LIST_HEAD(&chan->nvsw.flip);
INIT_LIST_HEAD(&chan->fence.pending);
+ spin_lock_init(&chan->fence.lock);
/* setup channel's memory and vm */
ret = nouveau_gpuobj_channel_init(chan, vram_handle, gart_handle);
case OUTPUT_DP:
max_clock = nv_encoder->dp.link_nr;
max_clock *= nv_encoder->dp.link_bw;
- clock = clock * nouveau_connector_bpp(connector) / 8;
+ clock = clock * nouveau_connector_bpp(connector) / 10;
break;
default:
BUG_ON(1);
*/
#include <linux/console.h>
+#include <linux/module.h>
#include "drmP.h"
#include "drm.h"
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nouveau_fbdev *nfbdev;
+ int preferred_bpp;
int ret;
nfbdev = kzalloc(sizeof(struct nouveau_fbdev), GFP_KERNEL);
}
drm_fb_helper_single_add_all_connectors(&nfbdev->helper);
- drm_fb_helper_initial_config(&nfbdev->helper, 32);
+
+ if (dev_priv->vram_size <= 32 * 1024 * 1024)
+ preferred_bpp = 8;
+ else if (dev_priv->vram_size <= 64 * 1024 * 1024)
+ preferred_bpp = 16;
+ else
+ preferred_bpp = 32;
+
+ drm_fb_helper_initial_config(&nfbdev->helper, preferred_bpp);
return 0;
}
return ret;
}
- INIT_LIST_HEAD(&chan->fence.pending);
- spin_lock_init(&chan->fence.lock);
atomic_set(&chan->fence.last_sequence_irq, 0);
return 0;
}
* Authors: Ben Skeggs
*/
+#include <linux/module.h>
+
#include "drmP.h"
#include "nouveau_drv.h"
#include "nouveau_i2c.h"
NV_DEBUG(dev, "Probing %ss on I2C bus: %d\n", what, index);
- for (i = 0; info[i].addr; i++) {
+ for (i = 0; i2c && info[i].addr; i++) {
if (nouveau_probe_i2c_addr(i2c, info[i].addr) &&
(!match || match(i2c, &info[i]))) {
NV_INFO(dev, "Detected %s: %s\n", what, info[i].type);
if(version == 0x15) {
memtimings->timing =
kcalloc(entries, sizeof(*memtimings->timing), GFP_KERNEL);
- if(!memtimings) {
+ if (!memtimings->timing) {
NV_WARN(dev,"Could not allocate memtiming table\n");
return;
}
if (ret)
goto out_display_early;
+ /* workaround an odd issue on nvc1 by disabling the device's
+ * nosnoop capability. hopefully won't cause issues until a
+ * better fix is found - assuming there is one...
+ */
+ if (dev_priv->chipset == 0xc1) {
+ nv_mask(dev, 0x00088080, 0x00000800, 0x00000000);
+ }
+
nouveau_pm_init(dev);
ret = engine->vram.init(dev);
dev_priv->noaccel = !!nouveau_noaccel;
if (nouveau_noaccel == -1) {
switch (dev_priv->chipset) {
- case 0xc1: /* known broken */
- case 0xc8: /* never tested */
+#if 0
+ case 0xXX: /* known broken */
NV_INFO(dev, "acceleration disabled by default, pass "
"noaccel=0 to force enable\n");
dev_priv->noaccel = true;
break;
+#endif
default:
dev_priv->noaccel = false;
break;
* Authors: Martin Peres
*/
+#include <linux/module.h>
+
#include "drmP.h"
#include "nouveau_drv.h"
int P = (ctrl & 0x00070000) >> 16;
u32 ref = 27000, clk = 0;
- if (ctrl & 0x80000000)
+ if ((ctrl & 0x80000000) && M1) {
clk = ref * N1 / M1;
-
- if (!(ctrl & 0x00000100)) {
- if (ctrl & 0x40000000)
- clk = clk * N2 / M2;
+ if ((ctrl & 0x40000100) == 0x40000000) {
+ if (M2)
+ clk = clk * N2 / M2;
+ else
+ clk = 0;
+ }
}
return clk >> P;
}
/* memory clock */
+ if (!perflvl->memory) {
+ info->mpll_ctrl = 0x00000000;
+ goto out;
+ }
+
ret = nv40_calc_pll(dev, 0x004020, &pll, perflvl->memory,
&N1, &M1, &N2, &M2, &log2P);
if (ret < 0)
mdelay(5);
nv_mask(dev, 0x00c040, 0x00000333, info->ctrl);
+ if (!info->mpll_ctrl)
+ goto resume;
+
/* wait for vblank start on active crtcs, disable memory access */
for (i = 0; i < 2; i++) {
if (!(crtc_mask & (1 << i)))
NV_DEBUG(dev, "\n");
/* master reset */
- nv_mask(dev, 0x000200, 0x00200100, 0x00000000);
- nv_mask(dev, 0x000200, 0x00200100, 0x00200100);
+ nv_mask(dev, 0x000200, 0x00201000, 0x00000000);
+ nv_mask(dev, 0x000200, 0x00201000, 0x00201000);
nv_wr32(dev, 0x40008c, 0x00000004); /* HW_CTX_SWITCH_ENABLED */
/* reset/enable traps and interrupts */
gr_def(ctx, offset + 0x1c, 0x00880000);
break;
case 0x86:
- gr_def(ctx, offset + 0x1c, 0x008c0000);
+ gr_def(ctx, offset + 0x1c, 0x018c0000);
break;
case 0x92:
case 0x96:
colbits = (r4 & 0x0000f000) >> 12;
rowbitsa = ((r4 & 0x000f0000) >> 16) + 8;
rowbitsb = ((r4 & 0x00f00000) >> 20) + 8;
- banks = ((r4 & 0x01000000) ? 8 : 4);
+ banks = 1 << (((r4 & 0x03000000) >> 24) + 2);
rowsize = parts * banks * (1 << colbits) * 8;
predicted = rowsize << rowbitsa;
*/
#include <linux/firmware.h>
+#include <linux/module.h>
#include "drmP.h"
struct nvc0_graph_priv *priv = nv_engine(chan->dev, NVOBJ_ENGINE_GR);
struct nvc0_graph_chan *grch = chan->engctx[NVOBJ_ENGINE_GR];
struct drm_device *dev = chan->dev;
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
int i = 0, gpc, tp, ret;
- u32 magic;
ret = nouveau_gpuobj_new(dev, chan, 0x2000, 256, NVOBJ_FLAG_VM,
&grch->unk408004);
nv_wo32(grch->mmio, i++ * 4, 0x0041880c);
nv_wo32(grch->mmio, i++ * 4, 0x80000018);
- magic = 0x02180000;
- nv_wo32(grch->mmio, i++ * 4, 0x00405830);
- nv_wo32(grch->mmio, i++ * 4, magic);
- for (gpc = 0; gpc < priv->gpc_nr; gpc++) {
- for (tp = 0; tp < priv->tp_nr[gpc]; tp++, magic += 0x0324) {
- u32 reg = 0x504520 + (gpc * 0x8000) + (tp * 0x0800);
- nv_wo32(grch->mmio, i++ * 4, reg);
- nv_wo32(grch->mmio, i++ * 4, magic);
+ if (dev_priv->chipset != 0xc1) {
+ u32 magic = 0x02180000;
+ nv_wo32(grch->mmio, i++ * 4, 0x00405830);
+ nv_wo32(grch->mmio, i++ * 4, magic);
+ for (gpc = 0; gpc < priv->gpc_nr; gpc++) {
+ for (tp = 0; tp < priv->tp_nr[gpc]; tp++) {
+ u32 reg = TP_UNIT(gpc, tp, 0x520);
+ nv_wo32(grch->mmio, i++ * 4, reg);
+ nv_wo32(grch->mmio, i++ * 4, magic);
+ magic += 0x0324;
+ }
+ }
+ } else {
+ u32 magic = 0x02180000;
+ nv_wo32(grch->mmio, i++ * 4, 0x00405830);
+ nv_wo32(grch->mmio, i++ * 4, magic | 0x0000218);
+ nv_wo32(grch->mmio, i++ * 4, 0x004064c4);
+ nv_wo32(grch->mmio, i++ * 4, 0x0086ffff);
+ for (gpc = 0; gpc < priv->gpc_nr; gpc++) {
+ for (tp = 0; tp < priv->tp_nr[gpc]; tp++) {
+ u32 reg = TP_UNIT(gpc, tp, 0x520);
+ nv_wo32(grch->mmio, i++ * 4, reg);
+ nv_wo32(grch->mmio, i++ * 4, (1 << 28) | magic);
+ magic += 0x0324;
+ }
+ for (tp = 0; tp < priv->tp_nr[gpc]; tp++) {
+ u32 reg = TP_UNIT(gpc, tp, 0x544);
+ nv_wo32(grch->mmio, i++ * 4, reg);
+ nv_wo32(grch->mmio, i++ * 4, magic);
+ magic += 0x0324;
+ }
}
}
/* calculate first set of magics */
memcpy(tpnr, priv->tp_nr, sizeof(priv->tp_nr));
+ gpc = -1;
for (tp = 0; tp < priv->tp_total; tp++) {
do {
gpc = (gpc + 1) % priv->gpc_nr;
if (1) {
u32 tp_mask = 0, tp_set = 0;
- u8 tpnr[GPC_MAX];
+ u8 tpnr[GPC_MAX], a, b;
memcpy(tpnr, priv->tp_nr, sizeof(priv->tp_nr));
for (gpc = 0; gpc < priv->gpc_nr; gpc++)
tp_mask |= ((1 << priv->tp_nr[gpc]) - 1) << (gpc * 8);
- gpc = -1;
- for (i = 0, gpc = -1; i < 32; i++) {
- int ltp = i * (priv->tp_total - 1) / 32;
-
- do {
- gpc = (gpc + 1) % priv->gpc_nr;
- } while (!tpnr[gpc]);
- tp = priv->tp_nr[gpc] - tpnr[gpc]--;
+ for (i = 0, gpc = -1, b = -1; i < 32; i++) {
+ a = (i * (priv->tp_total - 1)) / 32;
+ if (a != b) {
+ b = a;
+ do {
+ gpc = (gpc + 1) % priv->gpc_nr;
+ } while (!tpnr[gpc]);
+ tp = priv->tp_nr[gpc] - tpnr[gpc]--;
- tp_set |= 1 << ((gpc * 8) + tp);
+ tp_set |= 1 << ((gpc * 8) + tp);
+ }
- do {
- nv_wr32(dev, 0x406800 + (i * 0x20), tp_set);
- tp_set ^= tp_mask;
- nv_wr32(dev, 0x406c00 + (i * 0x20), tp_set);
- tp_set ^= tp_mask;
- } while (ltp == (++i * (priv->tp_total - 1) / 32));
- i--;
+ nv_wr32(dev, 0x406800 + (i * 0x20), tp_set);
+ nv_wr32(dev, 0x406c00 + (i * 0x20), tp_set ^ tp_mask);
}
}
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 3, 3, 3, 3, 1, 1, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3,
- 3, 3, 3, 3, 0, 0, 0, 0, 0, 0, 0, 0, 3, 3, 3, 3,
+ 3, 3, 3, 1, 0, 0, 0, 0, 0, 0, 0, 0, 3, 3, 3, 3,
3, 3, 0, 0, 0, 0, 0, 0, 3, 0, 0, 3, 0, 3, 0, 3,
3, 0, 3, 3, 3, 3, 3, 0, 0, 3, 0, 3, 0, 3, 3, 0,
3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 0, 1, 1, 0
u32 bsize = nv_rd32(dev, 0x10f20c);
u32 offset, length;
bool uniform = true;
- int ret, i;
+ int ret, part;
NV_DEBUG(dev, "0x100800: 0x%08x\n", nv_rd32(dev, 0x100800));
NV_DEBUG(dev, "parts 0x%08x bcast_mem_amount 0x%08x\n", parts, bsize);
/* read amount of vram attached to each memory controller */
- for (i = 0; i < parts; i++) {
- u32 psize = nv_rd32(dev, 0x11020c + (i * 0x1000));
+ part = 0;
+ while (parts) {
+ u32 psize = nv_rd32(dev, 0x11020c + (part++ * 0x1000));
+ if (psize == 0)
+ continue;
+ parts--;
+
if (psize != bsize) {
if (psize < bsize)
bsize = psize;
uniform = false;
}
- NV_DEBUG(dev, "%d: mem_amount 0x%08x\n", i, psize);
-
+ NV_DEBUG(dev, "%d: mem_amount 0x%08x\n", part, psize);
dev_priv->vram_size += (u64)psize << 20;
}
#include <linux/firmware.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include "drmP.h"
#include "drm.h"
* Gareth Hughes <gareth@valinux.com>
*/
+#include <linux/module.h>
+
#include "drmP.h"
#include "drm.h"
#include "r128_drm.h"
r200.o radeon_legacy_tv.o r600_cs.o r600_blit.o r600_blit_shaders.o \
r600_blit_kms.o radeon_pm.o atombios_dp.o r600_audio.o r600_hdmi.o \
evergreen.o evergreen_cs.o evergreen_blit_shaders.o evergreen_blit_kms.o \
- radeon_trace_points.o ni.o cayman_blit_shaders.o
+ radeon_trace_points.o ni.o cayman_blit_shaders.o atombios_encoders.o
radeon-$(CONFIG_COMPAT) += radeon_ioc32.o
radeon-$(CONFIG_VGA_SWITCHEROO) += radeon_atpx_handler.o
bpc = connector->display_info.bpc;
encoder_mode = atombios_get_encoder_mode(encoder);
if ((radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT | ATOM_DEVICE_DFP_SUPPORT)) ||
- radeon_encoder_is_dp_bridge(encoder)) {
+ (radeon_encoder_get_dp_bridge_encoder_id(encoder) != ENCODER_OBJECT_ID_NONE)) {
if (connector) {
struct radeon_connector *radeon_connector = to_radeon_connector(connector);
struct radeon_connector_atom_dig *dig_connector =
if (ss_enabled && ss->percentage)
args.v3.sInput.ucDispPllConfig |=
DISPPLL_CONFIG_SS_ENABLE;
- if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT) ||
- radeon_encoder_is_dp_bridge(encoder)) {
+ if (ENCODER_MODE_IS_DP(encoder_mode)) {
+ args.v3.sInput.ucDispPllConfig |=
+ DISPPLL_CONFIG_COHERENT_MODE;
+ /* 16200 or 27000 */
+ args.v3.sInput.usPixelClock = cpu_to_le16(dp_clock / 10);
+ } else if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT)) {
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
- if (encoder_mode == ATOM_ENCODER_MODE_DP) {
+ if (encoder_mode == ATOM_ENCODER_MODE_HDMI)
+ /* deep color support */
+ args.v3.sInput.usPixelClock =
+ cpu_to_le16((mode->clock * bpc / 8) / 10);
+ if (dig->coherent_mode)
args.v3.sInput.ucDispPllConfig |=
DISPPLL_CONFIG_COHERENT_MODE;
- /* 16200 or 27000 */
- args.v3.sInput.usPixelClock = cpu_to_le16(dp_clock / 10);
- } else {
- if (encoder_mode == ATOM_ENCODER_MODE_HDMI) {
- /* deep color support */
- args.v3.sInput.usPixelClock =
- cpu_to_le16((mode->clock * bpc / 8) / 10);
- }
- if (dig->coherent_mode)
- args.v3.sInput.ucDispPllConfig |=
- DISPPLL_CONFIG_COHERENT_MODE;
- if (mode->clock > 165000)
- args.v3.sInput.ucDispPllConfig |=
- DISPPLL_CONFIG_DUAL_LINK;
- }
- } else if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
- if (encoder_mode == ATOM_ENCODER_MODE_DP) {
+ if (mode->clock > 165000)
args.v3.sInput.ucDispPllConfig |=
- DISPPLL_CONFIG_COHERENT_MODE;
- /* 16200 or 27000 */
- args.v3.sInput.usPixelClock = cpu_to_le16(dp_clock / 10);
- } else if (encoder_mode != ATOM_ENCODER_MODE_LVDS) {
- if (mode->clock > 165000)
- args.v3.sInput.ucDispPllConfig |=
- DISPPLL_CONFIG_DUAL_LINK;
- }
+ DISPPLL_CONFIG_DUAL_LINK;
}
- if (radeon_encoder_is_dp_bridge(encoder)) {
- struct drm_encoder *ext_encoder = radeon_atom_get_external_encoder(encoder);
- struct radeon_encoder *ext_radeon_encoder = to_radeon_encoder(ext_encoder);
- args.v3.sInput.ucExtTransmitterID = ext_radeon_encoder->encoder_id;
- } else
+ if (radeon_encoder_get_dp_bridge_encoder_id(encoder) !=
+ ENCODER_OBJECT_ID_NONE)
+ args.v3.sInput.ucExtTransmitterID =
+ radeon_encoder_get_dp_bridge_encoder_id(encoder);
+ else
args.v3.sInput.ucExtTransmitterID = 0;
atom_execute_table(rdev->mode_info.atom_context,
bpc = connector->display_info.bpc;
switch (encoder_mode) {
+ case ATOM_ENCODER_MODE_DP_MST:
case ATOM_ENCODER_MODE_DP:
/* DP/eDP */
dp_clock = dig_connector->dp_clock / 10;
* PPLL/DCPLL programming and only program the DP DTO for the
* crtc virtual pixel clock.
*/
- if (atombios_get_encoder_mode(test_encoder) == ATOM_ENCODER_MODE_DP) {
+ if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) {
if (ASIC_IS_DCE5(rdev) || rdev->clock.dp_extclk)
return ATOM_PPLL_INVALID;
}
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
- struct drm_device *dev = crtc->dev;
- struct radeon_device *rdev = dev->dev_private;
-
- /* adjust pm to upcoming mode change */
- radeon_pm_compute_clocks(rdev);
-
if (!radeon_crtc_scaling_mode_fixup(crtc, mode, adjusted_mode))
return false;
return true;
}
}
- DRM_ERROR("aux i2c too many retries, giving up\n");
+ DRM_DEBUG_KMS("aux i2c too many retries, giving up\n");
return -EREMOTEIO;
}
int bpp = convert_bpc_to_bpp(connector->display_info.bpc);
int lane_num, max_pix_clock;
- if (radeon_connector_encoder_is_dp_bridge(connector))
+ if (radeon_connector_encoder_get_dp_bridge_encoder_id(connector) ==
+ ENCODER_OBJECT_ID_NUTMEG)
return 270000;
lane_num = radeon_dp_get_dp_lane_number(connector, dpcd, pix_clock);
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
+ struct radeon_connector *radeon_connector = to_radeon_connector(connector);
int panel_mode = DP_PANEL_MODE_EXTERNAL_DP_MODE;
if (!ASIC_IS_DCE4(rdev))
return;
- if (radeon_connector_encoder_is_dp_bridge(connector))
+ if (radeon_connector_encoder_get_dp_bridge_encoder_id(connector) ==
+ ENCODER_OBJECT_ID_NUTMEG)
panel_mode = DP_PANEL_MODE_INTERNAL_DP1_MODE;
+ else if (radeon_connector_encoder_get_dp_bridge_encoder_id(connector) ==
+ ENCODER_OBJECT_ID_TRAVIS)
+ panel_mode = DP_PANEL_MODE_INTERNAL_DP2_MODE;
+ else if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
+ u8 tmp = radeon_read_dpcd_reg(radeon_connector, DP_EDP_CONFIGURATION_CAP);
+ if (tmp & 1)
+ panel_mode = DP_PANEL_MODE_INTERNAL_DP2_MODE;
+ }
atombios_dig_encoder_setup(encoder,
ATOM_ENCODER_CMD_SETUP_PANEL_MODE,
panel_mode);
+
+ if ((connector->connector_type == DRM_MODE_CONNECTOR_eDP) &&
+ (panel_mode == DP_PANEL_MODE_INTERNAL_DP2_MODE)) {
+ radeon_write_dpcd_reg(radeon_connector, DP_EDP_CONFIGURATION_SET, 1);
+ }
}
void radeon_dp_set_link_config(struct drm_connector *connector,
--- /dev/null
+/*
+ * Copyright 2007-11 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ * Alex Deucher
+ */
+#include "drmP.h"
+#include "drm_crtc_helper.h"
+#include "radeon_drm.h"
+#include "radeon.h"
+#include "atom.h"
+
+extern int atom_debug;
+
+/* evil but including atombios.h is much worse */
+bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index,
+ struct drm_display_mode *mode);
+
+
+static inline bool radeon_encoder_is_digital(struct drm_encoder *encoder)
+{
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ switch (radeon_encoder->encoder_id) {
+ case ENCODER_OBJECT_ID_INTERNAL_LVDS:
+ case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
+ case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
+ case ENCODER_OBJECT_ID_INTERNAL_DVO1:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
+ case ENCODER_OBJECT_ID_INTERNAL_DDI:
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static struct drm_connector *
+radeon_get_connector_for_encoder_init(struct drm_encoder *encoder)
+{
+ struct drm_device *dev = encoder->dev;
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct drm_connector *connector;
+ struct radeon_connector *radeon_connector;
+
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+ radeon_connector = to_radeon_connector(connector);
+ if (radeon_encoder->devices & radeon_connector->devices)
+ return connector;
+ }
+ return NULL;
+}
+
+static bool radeon_atom_mode_fixup(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
+
+ /* set the active encoder to connector routing */
+ radeon_encoder_set_active_device(encoder);
+ drm_mode_set_crtcinfo(adjusted_mode, 0);
+
+ /* hw bug */
+ if ((mode->flags & DRM_MODE_FLAG_INTERLACE)
+ && (mode->crtc_vsync_start < (mode->crtc_vdisplay + 2)))
+ adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + 2;
+
+ /* get the native mode for LVDS */
+ if (radeon_encoder->active_device & (ATOM_DEVICE_LCD_SUPPORT))
+ radeon_panel_mode_fixup(encoder, adjusted_mode);
+
+ /* get the native mode for TV */
+ if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT)) {
+ struct radeon_encoder_atom_dac *tv_dac = radeon_encoder->enc_priv;
+ if (tv_dac) {
+ if (tv_dac->tv_std == TV_STD_NTSC ||
+ tv_dac->tv_std == TV_STD_NTSC_J ||
+ tv_dac->tv_std == TV_STD_PAL_M)
+ radeon_atom_get_tv_timings(rdev, 0, adjusted_mode);
+ else
+ radeon_atom_get_tv_timings(rdev, 1, adjusted_mode);
+ }
+ }
+
+ if (ASIC_IS_DCE3(rdev) &&
+ ((radeon_encoder->active_device & (ATOM_DEVICE_DFP_SUPPORT | ATOM_DEVICE_LCD_SUPPORT)) ||
+ (radeon_encoder_get_dp_bridge_encoder_id(encoder) != ENCODER_OBJECT_ID_NONE))) {
+ struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
+ radeon_dp_set_link_config(connector, mode);
+ }
+
+ return true;
+}
+
+static void
+atombios_dac_setup(struct drm_encoder *encoder, int action)
+{
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ DAC_ENCODER_CONTROL_PS_ALLOCATION args;
+ int index = 0;
+ struct radeon_encoder_atom_dac *dac_info = radeon_encoder->enc_priv;
+
+ memset(&args, 0, sizeof(args));
+
+ switch (radeon_encoder->encoder_id) {
+ case ENCODER_OBJECT_ID_INTERNAL_DAC1:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
+ index = GetIndexIntoMasterTable(COMMAND, DAC1EncoderControl);
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_DAC2:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
+ index = GetIndexIntoMasterTable(COMMAND, DAC2EncoderControl);
+ break;
+ }
+
+ args.ucAction = action;
+
+ if (radeon_encoder->active_device & (ATOM_DEVICE_CRT_SUPPORT))
+ args.ucDacStandard = ATOM_DAC1_PS2;
+ else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
+ args.ucDacStandard = ATOM_DAC1_CV;
+ else {
+ switch (dac_info->tv_std) {
+ case TV_STD_PAL:
+ case TV_STD_PAL_M:
+ case TV_STD_SCART_PAL:
+ case TV_STD_SECAM:
+ case TV_STD_PAL_CN:
+ args.ucDacStandard = ATOM_DAC1_PAL;
+ break;
+ case TV_STD_NTSC:
+ case TV_STD_NTSC_J:
+ case TV_STD_PAL_60:
+ default:
+ args.ucDacStandard = ATOM_DAC1_NTSC;
+ break;
+ }
+ }
+ args.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+
+}
+
+static void
+atombios_tv_setup(struct drm_encoder *encoder, int action)
+{
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ TV_ENCODER_CONTROL_PS_ALLOCATION args;
+ int index = 0;
+ struct radeon_encoder_atom_dac *dac_info = radeon_encoder->enc_priv;
+
+ memset(&args, 0, sizeof(args));
+
+ index = GetIndexIntoMasterTable(COMMAND, TVEncoderControl);
+
+ args.sTVEncoder.ucAction = action;
+
+ if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
+ args.sTVEncoder.ucTvStandard = ATOM_TV_CV;
+ else {
+ switch (dac_info->tv_std) {
+ case TV_STD_NTSC:
+ args.sTVEncoder.ucTvStandard = ATOM_TV_NTSC;
+ break;
+ case TV_STD_PAL:
+ args.sTVEncoder.ucTvStandard = ATOM_TV_PAL;
+ break;
+ case TV_STD_PAL_M:
+ args.sTVEncoder.ucTvStandard = ATOM_TV_PALM;
+ break;
+ case TV_STD_PAL_60:
+ args.sTVEncoder.ucTvStandard = ATOM_TV_PAL60;
+ break;
+ case TV_STD_NTSC_J:
+ args.sTVEncoder.ucTvStandard = ATOM_TV_NTSCJ;
+ break;
+ case TV_STD_SCART_PAL:
+ args.sTVEncoder.ucTvStandard = ATOM_TV_PAL; /* ??? */
+ break;
+ case TV_STD_SECAM:
+ args.sTVEncoder.ucTvStandard = ATOM_TV_SECAM;
+ break;
+ case TV_STD_PAL_CN:
+ args.sTVEncoder.ucTvStandard = ATOM_TV_PALCN;
+ break;
+ default:
+ args.sTVEncoder.ucTvStandard = ATOM_TV_NTSC;
+ break;
+ }
+ }
+
+ args.sTVEncoder.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+
+}
+
+union dvo_encoder_control {
+ ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION ext_tmds;
+ DVO_ENCODER_CONTROL_PS_ALLOCATION dvo;
+ DVO_ENCODER_CONTROL_PS_ALLOCATION_V3 dvo_v3;
+};
+
+void
+atombios_dvo_setup(struct drm_encoder *encoder, int action)
+{
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ union dvo_encoder_control args;
+ int index = GetIndexIntoMasterTable(COMMAND, DVOEncoderControl);
+ uint8_t frev, crev;
+
+ memset(&args, 0, sizeof(args));
+
+ if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
+ return;
+
+ switch (frev) {
+ case 1:
+ switch (crev) {
+ case 1:
+ /* R4xx, R5xx */
+ args.ext_tmds.sXTmdsEncoder.ucEnable = action;
+
+ if (radeon_encoder->pixel_clock > 165000)
+ args.ext_tmds.sXTmdsEncoder.ucMisc |= PANEL_ENCODER_MISC_DUAL;
+
+ args.ext_tmds.sXTmdsEncoder.ucMisc |= ATOM_PANEL_MISC_888RGB;
+ break;
+ case 2:
+ /* RS600/690/740 */
+ args.dvo.sDVOEncoder.ucAction = action;
+ args.dvo.sDVOEncoder.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+ /* DFP1, CRT1, TV1 depending on the type of port */
+ args.dvo.sDVOEncoder.ucDeviceType = ATOM_DEVICE_DFP1_INDEX;
+
+ if (radeon_encoder->pixel_clock > 165000)
+ args.dvo.sDVOEncoder.usDevAttr.sDigAttrib.ucAttribute |= PANEL_ENCODER_MISC_DUAL;
+ break;
+ case 3:
+ /* R6xx */
+ args.dvo_v3.ucAction = action;
+ args.dvo_v3.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+ args.dvo_v3.ucDVOConfig = 0; /* XXX */
+ break;
+ default:
+ DRM_ERROR("Unknown table version %d, %d\n", frev, crev);
+ break;
+ }
+ break;
+ default:
+ DRM_ERROR("Unknown table version %d, %d\n", frev, crev);
+ break;
+ }
+
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+}
+
+union lvds_encoder_control {
+ LVDS_ENCODER_CONTROL_PS_ALLOCATION v1;
+ LVDS_ENCODER_CONTROL_PS_ALLOCATION_V2 v2;
+};
+
+void
+atombios_digital_setup(struct drm_encoder *encoder, int action)
+{
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
+ union lvds_encoder_control args;
+ int index = 0;
+ int hdmi_detected = 0;
+ uint8_t frev, crev;
+
+ if (!dig)
+ return;
+
+ if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_HDMI)
+ hdmi_detected = 1;
+
+ memset(&args, 0, sizeof(args));
+
+ switch (radeon_encoder->encoder_id) {
+ case ENCODER_OBJECT_ID_INTERNAL_LVDS:
+ index = GetIndexIntoMasterTable(COMMAND, LVDSEncoderControl);
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
+ index = GetIndexIntoMasterTable(COMMAND, TMDS1EncoderControl);
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
+ if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
+ index = GetIndexIntoMasterTable(COMMAND, LVDSEncoderControl);
+ else
+ index = GetIndexIntoMasterTable(COMMAND, TMDS2EncoderControl);
+ break;
+ }
+
+ if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
+ return;
+
+ switch (frev) {
+ case 1:
+ case 2:
+ switch (crev) {
+ case 1:
+ args.v1.ucMisc = 0;
+ args.v1.ucAction = action;
+ if (hdmi_detected)
+ args.v1.ucMisc |= PANEL_ENCODER_MISC_HDMI_TYPE;
+ args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+ if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
+ if (dig->lcd_misc & ATOM_PANEL_MISC_DUAL)
+ args.v1.ucMisc |= PANEL_ENCODER_MISC_DUAL;
+ if (dig->lcd_misc & ATOM_PANEL_MISC_888RGB)
+ args.v1.ucMisc |= ATOM_PANEL_MISC_888RGB;
+ } else {
+ if (dig->linkb)
+ args.v1.ucMisc |= PANEL_ENCODER_MISC_TMDS_LINKB;
+ if (radeon_encoder->pixel_clock > 165000)
+ args.v1.ucMisc |= PANEL_ENCODER_MISC_DUAL;
+ /*if (pScrn->rgbBits == 8) */
+ args.v1.ucMisc |= ATOM_PANEL_MISC_888RGB;
+ }
+ break;
+ case 2:
+ case 3:
+ args.v2.ucMisc = 0;
+ args.v2.ucAction = action;
+ if (crev == 3) {
+ if (dig->coherent_mode)
+ args.v2.ucMisc |= PANEL_ENCODER_MISC_COHERENT;
+ }
+ if (hdmi_detected)
+ args.v2.ucMisc |= PANEL_ENCODER_MISC_HDMI_TYPE;
+ args.v2.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+ args.v2.ucTruncate = 0;
+ args.v2.ucSpatial = 0;
+ args.v2.ucTemporal = 0;
+ args.v2.ucFRC = 0;
+ if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
+ if (dig->lcd_misc & ATOM_PANEL_MISC_DUAL)
+ args.v2.ucMisc |= PANEL_ENCODER_MISC_DUAL;
+ if (dig->lcd_misc & ATOM_PANEL_MISC_SPATIAL) {
+ args.v2.ucSpatial = PANEL_ENCODER_SPATIAL_DITHER_EN;
+ if (dig->lcd_misc & ATOM_PANEL_MISC_888RGB)
+ args.v2.ucSpatial |= PANEL_ENCODER_SPATIAL_DITHER_DEPTH;
+ }
+ if (dig->lcd_misc & ATOM_PANEL_MISC_TEMPORAL) {
+ args.v2.ucTemporal = PANEL_ENCODER_TEMPORAL_DITHER_EN;
+ if (dig->lcd_misc & ATOM_PANEL_MISC_888RGB)
+ args.v2.ucTemporal |= PANEL_ENCODER_TEMPORAL_DITHER_DEPTH;
+ if (((dig->lcd_misc >> ATOM_PANEL_MISC_GREY_LEVEL_SHIFT) & 0x3) == 2)
+ args.v2.ucTemporal |= PANEL_ENCODER_TEMPORAL_LEVEL_4;
+ }
+ } else {
+ if (dig->linkb)
+ args.v2.ucMisc |= PANEL_ENCODER_MISC_TMDS_LINKB;
+ if (radeon_encoder->pixel_clock > 165000)
+ args.v2.ucMisc |= PANEL_ENCODER_MISC_DUAL;
+ }
+ break;
+ default:
+ DRM_ERROR("Unknown table version %d, %d\n", frev, crev);
+ break;
+ }
+ break;
+ default:
+ DRM_ERROR("Unknown table version %d, %d\n", frev, crev);
+ break;
+ }
+
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+}
+
+int
+atombios_get_encoder_mode(struct drm_encoder *encoder)
+{
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct drm_connector *connector;
+ struct radeon_connector *radeon_connector;
+ struct radeon_connector_atom_dig *dig_connector;
+
+ /* dp bridges are always DP */
+ if (radeon_encoder_get_dp_bridge_encoder_id(encoder) != ENCODER_OBJECT_ID_NONE)
+ return ATOM_ENCODER_MODE_DP;
+
+ /* DVO is always DVO */
+ if (radeon_encoder->encoder_id == ATOM_ENCODER_MODE_DVO)
+ return ATOM_ENCODER_MODE_DVO;
+
+ connector = radeon_get_connector_for_encoder(encoder);
+ /* if we don't have an active device yet, just use one of
+ * the connectors tied to the encoder.
+ */
+ if (!connector)
+ connector = radeon_get_connector_for_encoder_init(encoder);
+ radeon_connector = to_radeon_connector(connector);
+
+ switch (connector->connector_type) {
+ case DRM_MODE_CONNECTOR_DVII:
+ case DRM_MODE_CONNECTOR_HDMIB: /* HDMI-B is basically DL-DVI; analog works fine */
+ if (drm_detect_monitor_audio(radeon_connector->edid) && radeon_audio) {
+ /* fix me */
+ if (ASIC_IS_DCE4(rdev))
+ return ATOM_ENCODER_MODE_DVI;
+ else
+ return ATOM_ENCODER_MODE_HDMI;
+ } else if (radeon_connector->use_digital)
+ return ATOM_ENCODER_MODE_DVI;
+ else
+ return ATOM_ENCODER_MODE_CRT;
+ break;
+ case DRM_MODE_CONNECTOR_DVID:
+ case DRM_MODE_CONNECTOR_HDMIA:
+ default:
+ if (drm_detect_monitor_audio(radeon_connector->edid) && radeon_audio) {
+ /* fix me */
+ if (ASIC_IS_DCE4(rdev))
+ return ATOM_ENCODER_MODE_DVI;
+ else
+ return ATOM_ENCODER_MODE_HDMI;
+ } else
+ return ATOM_ENCODER_MODE_DVI;
+ break;
+ case DRM_MODE_CONNECTOR_LVDS:
+ return ATOM_ENCODER_MODE_LVDS;
+ break;
+ case DRM_MODE_CONNECTOR_DisplayPort:
+ dig_connector = radeon_connector->con_priv;
+ if ((dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT) ||
+ (dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_eDP))
+ return ATOM_ENCODER_MODE_DP;
+ else if (drm_detect_monitor_audio(radeon_connector->edid) && radeon_audio) {
+ /* fix me */
+ if (ASIC_IS_DCE4(rdev))
+ return ATOM_ENCODER_MODE_DVI;
+ else
+ return ATOM_ENCODER_MODE_HDMI;
+ } else
+ return ATOM_ENCODER_MODE_DVI;
+ break;
+ case DRM_MODE_CONNECTOR_eDP:
+ return ATOM_ENCODER_MODE_DP;
+ case DRM_MODE_CONNECTOR_DVIA:
+ case DRM_MODE_CONNECTOR_VGA:
+ return ATOM_ENCODER_MODE_CRT;
+ break;
+ case DRM_MODE_CONNECTOR_Composite:
+ case DRM_MODE_CONNECTOR_SVIDEO:
+ case DRM_MODE_CONNECTOR_9PinDIN:
+ /* fix me */
+ return ATOM_ENCODER_MODE_TV;
+ /*return ATOM_ENCODER_MODE_CV;*/
+ break;
+ }
+}
+
+/*
+ * DIG Encoder/Transmitter Setup
+ *
+ * DCE 3.0/3.1
+ * - 2 DIG transmitter blocks. UNIPHY (links A and B) and LVTMA.
+ * Supports up to 3 digital outputs
+ * - 2 DIG encoder blocks.
+ * DIG1 can drive UNIPHY link A or link B
+ * DIG2 can drive UNIPHY link B or LVTMA
+ *
+ * DCE 3.2
+ * - 3 DIG transmitter blocks. UNIPHY0/1/2 (links A and B).
+ * Supports up to 5 digital outputs
+ * - 2 DIG encoder blocks.
+ * DIG1/2 can drive UNIPHY0/1/2 link A or link B
+ *
+ * DCE 4.0/5.0
+ * - 3 DIG transmitter blocks UNIPHY0/1/2 (links A and B).
+ * Supports up to 6 digital outputs
+ * - 6 DIG encoder blocks.
+ * - DIG to PHY mapping is hardcoded
+ * DIG1 drives UNIPHY0 link A, A+B
+ * DIG2 drives UNIPHY0 link B
+ * DIG3 drives UNIPHY1 link A, A+B
+ * DIG4 drives UNIPHY1 link B
+ * DIG5 drives UNIPHY2 link A, A+B
+ * DIG6 drives UNIPHY2 link B
+ *
+ * DCE 4.1
+ * - 3 DIG transmitter blocks UNIPHY0/1/2 (links A and B).
+ * Supports up to 6 digital outputs
+ * - 2 DIG encoder blocks.
+ * DIG1/2 can drive UNIPHY0/1/2 link A or link B
+ *
+ * Routing
+ * crtc -> dig encoder -> UNIPHY/LVTMA (1 or 2 links)
+ * Examples:
+ * crtc0 -> dig2 -> LVTMA links A+B -> TMDS/HDMI
+ * crtc1 -> dig1 -> UNIPHY0 link B -> DP
+ * crtc0 -> dig1 -> UNIPHY2 link A -> LVDS
+ * crtc1 -> dig2 -> UNIPHY1 link B+A -> TMDS/HDMI
+ */
+
+union dig_encoder_control {
+ DIG_ENCODER_CONTROL_PS_ALLOCATION v1;
+ DIG_ENCODER_CONTROL_PARAMETERS_V2 v2;
+ DIG_ENCODER_CONTROL_PARAMETERS_V3 v3;
+ DIG_ENCODER_CONTROL_PARAMETERS_V4 v4;
+};
+
+void
+atombios_dig_encoder_setup(struct drm_encoder *encoder, int action, int panel_mode)
+{
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
+ struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
+ union dig_encoder_control args;
+ int index = 0;
+ uint8_t frev, crev;
+ int dp_clock = 0;
+ int dp_lane_count = 0;
+ int hpd_id = RADEON_HPD_NONE;
+ int bpc = 8;
+
+ if (connector) {
+ struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+ struct radeon_connector_atom_dig *dig_connector =
+ radeon_connector->con_priv;
+
+ dp_clock = dig_connector->dp_clock;
+ dp_lane_count = dig_connector->dp_lane_count;
+ hpd_id = radeon_connector->hpd.hpd;
+ bpc = connector->display_info.bpc;
+ }
+
+ /* no dig encoder assigned */
+ if (dig->dig_encoder == -1)
+ return;
+
+ memset(&args, 0, sizeof(args));
+
+ if (ASIC_IS_DCE4(rdev))
+ index = GetIndexIntoMasterTable(COMMAND, DIGxEncoderControl);
+ else {
+ if (dig->dig_encoder)
+ index = GetIndexIntoMasterTable(COMMAND, DIG2EncoderControl);
+ else
+ index = GetIndexIntoMasterTable(COMMAND, DIG1EncoderControl);
+ }
+
+ if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
+ return;
+
+ switch (frev) {
+ case 1:
+ switch (crev) {
+ case 1:
+ args.v1.ucAction = action;
+ args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+ if (action == ATOM_ENCODER_CMD_SETUP_PANEL_MODE)
+ args.v3.ucPanelMode = panel_mode;
+ else
+ args.v1.ucEncoderMode = atombios_get_encoder_mode(encoder);
+
+ if (ENCODER_MODE_IS_DP(args.v1.ucEncoderMode))
+ args.v1.ucLaneNum = dp_lane_count;
+ else if (radeon_encoder->pixel_clock > 165000)
+ args.v1.ucLaneNum = 8;
+ else
+ args.v1.ucLaneNum = 4;
+
+ if (ENCODER_MODE_IS_DP(args.v1.ucEncoderMode) && (dp_clock == 270000))
+ args.v1.ucConfig |= ATOM_ENCODER_CONFIG_DPLINKRATE_2_70GHZ;
+ switch (radeon_encoder->encoder_id) {
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+ args.v1.ucConfig = ATOM_ENCODER_CONFIG_V2_TRANSMITTER1;
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
+ args.v1.ucConfig = ATOM_ENCODER_CONFIG_V2_TRANSMITTER2;
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+ args.v1.ucConfig = ATOM_ENCODER_CONFIG_V2_TRANSMITTER3;
+ break;
+ }
+ if (dig->linkb)
+ args.v1.ucConfig |= ATOM_ENCODER_CONFIG_LINKB;
+ else
+ args.v1.ucConfig |= ATOM_ENCODER_CONFIG_LINKA;
+ break;
+ case 2:
+ case 3:
+ args.v3.ucAction = action;
+ args.v3.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+ if (action == ATOM_ENCODER_CMD_SETUP_PANEL_MODE)
+ args.v3.ucPanelMode = panel_mode;
+ else
+ args.v3.ucEncoderMode = atombios_get_encoder_mode(encoder);
+
+ if (ENCODER_MODE_IS_DP(args.v1.ucEncoderMode))
+ args.v3.ucLaneNum = dp_lane_count;
+ else if (radeon_encoder->pixel_clock > 165000)
+ args.v3.ucLaneNum = 8;
+ else
+ args.v3.ucLaneNum = 4;
+
+ if (ENCODER_MODE_IS_DP(args.v1.ucEncoderMode) && (dp_clock == 270000))
+ args.v1.ucConfig |= ATOM_ENCODER_CONFIG_V3_DPLINKRATE_2_70GHZ;
+ args.v3.acConfig.ucDigSel = dig->dig_encoder;
+ switch (bpc) {
+ case 0:
+ args.v3.ucBitPerColor = PANEL_BPC_UNDEFINE;
+ break;
+ case 6:
+ args.v3.ucBitPerColor = PANEL_6BIT_PER_COLOR;
+ break;
+ case 8:
+ default:
+ args.v3.ucBitPerColor = PANEL_8BIT_PER_COLOR;
+ break;
+ case 10:
+ args.v3.ucBitPerColor = PANEL_10BIT_PER_COLOR;
+ break;
+ case 12:
+ args.v3.ucBitPerColor = PANEL_12BIT_PER_COLOR;
+ break;
+ case 16:
+ args.v3.ucBitPerColor = PANEL_16BIT_PER_COLOR;
+ break;
+ }
+ break;
+ case 4:
+ args.v4.ucAction = action;
+ args.v4.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+ if (action == ATOM_ENCODER_CMD_SETUP_PANEL_MODE)
+ args.v4.ucPanelMode = panel_mode;
+ else
+ args.v4.ucEncoderMode = atombios_get_encoder_mode(encoder);
+
+ if (ENCODER_MODE_IS_DP(args.v1.ucEncoderMode))
+ args.v4.ucLaneNum = dp_lane_count;
+ else if (radeon_encoder->pixel_clock > 165000)
+ args.v4.ucLaneNum = 8;
+ else
+ args.v4.ucLaneNum = 4;
+
+ if (ENCODER_MODE_IS_DP(args.v1.ucEncoderMode)) {
+ if (dp_clock == 270000)
+ args.v1.ucConfig |= ATOM_ENCODER_CONFIG_V4_DPLINKRATE_2_70GHZ;
+ else if (dp_clock == 540000)
+ args.v1.ucConfig |= ATOM_ENCODER_CONFIG_V4_DPLINKRATE_5_40GHZ;
+ }
+ args.v4.acConfig.ucDigSel = dig->dig_encoder;
+ switch (bpc) {
+ case 0:
+ args.v4.ucBitPerColor = PANEL_BPC_UNDEFINE;
+ break;
+ case 6:
+ args.v4.ucBitPerColor = PANEL_6BIT_PER_COLOR;
+ break;
+ case 8:
+ default:
+ args.v4.ucBitPerColor = PANEL_8BIT_PER_COLOR;
+ break;
+ case 10:
+ args.v4.ucBitPerColor = PANEL_10BIT_PER_COLOR;
+ break;
+ case 12:
+ args.v4.ucBitPerColor = PANEL_12BIT_PER_COLOR;
+ break;
+ case 16:
+ args.v4.ucBitPerColor = PANEL_16BIT_PER_COLOR;
+ break;
+ }
+ if (hpd_id == RADEON_HPD_NONE)
+ args.v4.ucHPD_ID = 0;
+ else
+ args.v4.ucHPD_ID = hpd_id + 1;
+ break;
+ default:
+ DRM_ERROR("Unknown table version %d, %d\n", frev, crev);
+ break;
+ }
+ break;
+ default:
+ DRM_ERROR("Unknown table version %d, %d\n", frev, crev);
+ break;
+ }
+
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+
+}
+
+union dig_transmitter_control {
+ DIG_TRANSMITTER_CONTROL_PS_ALLOCATION v1;
+ DIG_TRANSMITTER_CONTROL_PARAMETERS_V2 v2;
+ DIG_TRANSMITTER_CONTROL_PARAMETERS_V3 v3;
+ DIG_TRANSMITTER_CONTROL_PARAMETERS_V4 v4;
+};
+
+void
+atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action, uint8_t lane_num, uint8_t lane_set)
+{
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
+ struct drm_connector *connector;
+ union dig_transmitter_control args;
+ int index = 0;
+ uint8_t frev, crev;
+ bool is_dp = false;
+ int pll_id = 0;
+ int dp_clock = 0;
+ int dp_lane_count = 0;
+ int connector_object_id = 0;
+ int igp_lane_info = 0;
+ int dig_encoder = dig->dig_encoder;
+
+ if (action == ATOM_TRANSMITTER_ACTION_INIT) {
+ connector = radeon_get_connector_for_encoder_init(encoder);
+ /* just needed to avoid bailing in the encoder check. the encoder
+ * isn't used for init
+ */
+ dig_encoder = 0;
+ } else
+ connector = radeon_get_connector_for_encoder(encoder);
+
+ if (connector) {
+ struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+ struct radeon_connector_atom_dig *dig_connector =
+ radeon_connector->con_priv;
+
+ dp_clock = dig_connector->dp_clock;
+ dp_lane_count = dig_connector->dp_lane_count;
+ connector_object_id =
+ (radeon_connector->connector_object_id & OBJECT_ID_MASK) >> OBJECT_ID_SHIFT;
+ igp_lane_info = dig_connector->igp_lane_info;
+ }
+
+ if (encoder->crtc) {
+ struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
+ pll_id = radeon_crtc->pll_id;
+ }
+
+ /* no dig encoder assigned */
+ if (dig_encoder == -1)
+ return;
+
+ if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(encoder)))
+ is_dp = true;
+
+ memset(&args, 0, sizeof(args));
+
+ switch (radeon_encoder->encoder_id) {
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
+ index = GetIndexIntoMasterTable(COMMAND, DVOOutputControl);
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+ index = GetIndexIntoMasterTable(COMMAND, UNIPHYTransmitterControl);
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
+ index = GetIndexIntoMasterTable(COMMAND, LVTMATransmitterControl);
+ break;
+ }
+
+ if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
+ return;
+
+ switch (frev) {
+ case 1:
+ switch (crev) {
+ case 1:
+ args.v1.ucAction = action;
+ if (action == ATOM_TRANSMITTER_ACTION_INIT) {
+ args.v1.usInitInfo = cpu_to_le16(connector_object_id);
+ } else if (action == ATOM_TRANSMITTER_ACTION_SETUP_VSEMPH) {
+ args.v1.asMode.ucLaneSel = lane_num;
+ args.v1.asMode.ucLaneSet = lane_set;
+ } else {
+ if (is_dp)
+ args.v1.usPixelClock =
+ cpu_to_le16(dp_clock / 10);
+ else if (radeon_encoder->pixel_clock > 165000)
+ args.v1.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock / 2) / 10);
+ else
+ args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+ }
+
+ args.v1.ucConfig = ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL;
+
+ if (dig_encoder)
+ args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG2_ENCODER;
+ else
+ args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG1_ENCODER;
+
+ if ((rdev->flags & RADEON_IS_IGP) &&
+ (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_UNIPHY)) {
+ if (is_dp || (radeon_encoder->pixel_clock <= 165000)) {
+ if (igp_lane_info & 0x1)
+ args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_0_3;
+ else if (igp_lane_info & 0x2)
+ args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_4_7;
+ else if (igp_lane_info & 0x4)
+ args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_8_11;
+ else if (igp_lane_info & 0x8)
+ args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_12_15;
+ } else {
+ if (igp_lane_info & 0x3)
+ args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_0_7;
+ else if (igp_lane_info & 0xc)
+ args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_8_15;
+ }
+ }
+
+ if (dig->linkb)
+ args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LINKB;
+ else
+ args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LINKA;
+
+ if (is_dp)
+ args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_COHERENT;
+ else if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT)) {
+ if (dig->coherent_mode)
+ args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_COHERENT;
+ if (radeon_encoder->pixel_clock > 165000)
+ args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_8LANE_LINK;
+ }
+ break;
+ case 2:
+ args.v2.ucAction = action;
+ if (action == ATOM_TRANSMITTER_ACTION_INIT) {
+ args.v2.usInitInfo = cpu_to_le16(connector_object_id);
+ } else if (action == ATOM_TRANSMITTER_ACTION_SETUP_VSEMPH) {
+ args.v2.asMode.ucLaneSel = lane_num;
+ args.v2.asMode.ucLaneSet = lane_set;
+ } else {
+ if (is_dp)
+ args.v2.usPixelClock =
+ cpu_to_le16(dp_clock / 10);
+ else if (radeon_encoder->pixel_clock > 165000)
+ args.v2.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock / 2) / 10);
+ else
+ args.v2.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+ }
+
+ args.v2.acConfig.ucEncoderSel = dig_encoder;
+ if (dig->linkb)
+ args.v2.acConfig.ucLinkSel = 1;
+
+ switch (radeon_encoder->encoder_id) {
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+ args.v2.acConfig.ucTransmitterSel = 0;
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+ args.v2.acConfig.ucTransmitterSel = 1;
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+ args.v2.acConfig.ucTransmitterSel = 2;
+ break;
+ }
+
+ if (is_dp) {
+ args.v2.acConfig.fCoherentMode = 1;
+ args.v2.acConfig.fDPConnector = 1;
+ } else if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT)) {
+ if (dig->coherent_mode)
+ args.v2.acConfig.fCoherentMode = 1;
+ if (radeon_encoder->pixel_clock > 165000)
+ args.v2.acConfig.fDualLinkConnector = 1;
+ }
+ break;
+ case 3:
+ args.v3.ucAction = action;
+ if (action == ATOM_TRANSMITTER_ACTION_INIT) {
+ args.v3.usInitInfo = cpu_to_le16(connector_object_id);
+ } else if (action == ATOM_TRANSMITTER_ACTION_SETUP_VSEMPH) {
+ args.v3.asMode.ucLaneSel = lane_num;
+ args.v3.asMode.ucLaneSet = lane_set;
+ } else {
+ if (is_dp)
+ args.v3.usPixelClock =
+ cpu_to_le16(dp_clock / 10);
+ else if (radeon_encoder->pixel_clock > 165000)
+ args.v3.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock / 2) / 10);
+ else
+ args.v3.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+ }
+
+ if (is_dp)
+ args.v3.ucLaneNum = dp_lane_count;
+ else if (radeon_encoder->pixel_clock > 165000)
+ args.v3.ucLaneNum = 8;
+ else
+ args.v3.ucLaneNum = 4;
+
+ if (dig->linkb)
+ args.v3.acConfig.ucLinkSel = 1;
+ if (dig_encoder & 1)
+ args.v3.acConfig.ucEncoderSel = 1;
+
+ /* Select the PLL for the PHY
+ * DP PHY should be clocked from external src if there is
+ * one.
+ */
+ /* On DCE4, if there is an external clock, it generates the DP ref clock */
+ if (is_dp && rdev->clock.dp_extclk)
+ args.v3.acConfig.ucRefClkSource = 2; /* external src */
+ else
+ args.v3.acConfig.ucRefClkSource = pll_id;
+
+ switch (radeon_encoder->encoder_id) {
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+ args.v3.acConfig.ucTransmitterSel = 0;
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+ args.v3.acConfig.ucTransmitterSel = 1;
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+ args.v3.acConfig.ucTransmitterSel = 2;
+ break;
+ }
+
+ if (is_dp)
+ args.v3.acConfig.fCoherentMode = 1; /* DP requires coherent */
+ else if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT)) {
+ if (dig->coherent_mode)
+ args.v3.acConfig.fCoherentMode = 1;
+ if (radeon_encoder->pixel_clock > 165000)
+ args.v3.acConfig.fDualLinkConnector = 1;
+ }
+ break;
+ case 4:
+ args.v4.ucAction = action;
+ if (action == ATOM_TRANSMITTER_ACTION_INIT) {
+ args.v4.usInitInfo = cpu_to_le16(connector_object_id);
+ } else if (action == ATOM_TRANSMITTER_ACTION_SETUP_VSEMPH) {
+ args.v4.asMode.ucLaneSel = lane_num;
+ args.v4.asMode.ucLaneSet = lane_set;
+ } else {
+ if (is_dp)
+ args.v4.usPixelClock =
+ cpu_to_le16(dp_clock / 10);
+ else if (radeon_encoder->pixel_clock > 165000)
+ args.v4.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock / 2) / 10);
+ else
+ args.v4.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+ }
+
+ if (is_dp)
+ args.v4.ucLaneNum = dp_lane_count;
+ else if (radeon_encoder->pixel_clock > 165000)
+ args.v4.ucLaneNum = 8;
+ else
+ args.v4.ucLaneNum = 4;
+
+ if (dig->linkb)
+ args.v4.acConfig.ucLinkSel = 1;
+ if (dig_encoder & 1)
+ args.v4.acConfig.ucEncoderSel = 1;
+
+ /* Select the PLL for the PHY
+ * DP PHY should be clocked from external src if there is
+ * one.
+ */
+ /* On DCE5 DCPLL usually generates the DP ref clock */
+ if (is_dp) {
+ if (rdev->clock.dp_extclk)
+ args.v4.acConfig.ucRefClkSource = ENCODER_REFCLK_SRC_EXTCLK;
+ else
+ args.v4.acConfig.ucRefClkSource = ENCODER_REFCLK_SRC_DCPLL;
+ } else
+ args.v4.acConfig.ucRefClkSource = pll_id;
+
+ switch (radeon_encoder->encoder_id) {
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+ args.v4.acConfig.ucTransmitterSel = 0;
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+ args.v4.acConfig.ucTransmitterSel = 1;
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+ args.v4.acConfig.ucTransmitterSel = 2;
+ break;
+ }
+
+ if (is_dp)
+ args.v4.acConfig.fCoherentMode = 1; /* DP requires coherent */
+ else if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT)) {
+ if (dig->coherent_mode)
+ args.v4.acConfig.fCoherentMode = 1;
+ if (radeon_encoder->pixel_clock > 165000)
+ args.v4.acConfig.fDualLinkConnector = 1;
+ }
+ break;
+ default:
+ DRM_ERROR("Unknown table version %d, %d\n", frev, crev);
+ break;
+ }
+ break;
+ default:
+ DRM_ERROR("Unknown table version %d, %d\n", frev, crev);
+ break;
+ }
+
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+}
+
+bool
+atombios_set_edp_panel_power(struct drm_connector *connector, int action)
+{
+ struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+ struct drm_device *dev = radeon_connector->base.dev;
+ struct radeon_device *rdev = dev->dev_private;
+ union dig_transmitter_control args;
+ int index = GetIndexIntoMasterTable(COMMAND, UNIPHYTransmitterControl);
+ uint8_t frev, crev;
+
+ if (connector->connector_type != DRM_MODE_CONNECTOR_eDP)
+ goto done;
+
+ if (!ASIC_IS_DCE4(rdev))
+ goto done;
+
+ if ((action != ATOM_TRANSMITTER_ACTION_POWER_ON) &&
+ (action != ATOM_TRANSMITTER_ACTION_POWER_OFF))
+ goto done;
+
+ if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
+ goto done;
+
+ memset(&args, 0, sizeof(args));
+
+ args.v1.ucAction = action;
+
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+
+ /* wait for the panel to power up */
+ if (action == ATOM_TRANSMITTER_ACTION_POWER_ON) {
+ int i;
+
+ for (i = 0; i < 300; i++) {
+ if (radeon_hpd_sense(rdev, radeon_connector->hpd.hpd))
+ return true;
+ mdelay(1);
+ }
+ return false;
+ }
+done:
+ return true;
+}
+
+union external_encoder_control {
+ EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION v1;
+ EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION_V3 v3;
+};
+
+static void
+atombios_external_encoder_setup(struct drm_encoder *encoder,
+ struct drm_encoder *ext_encoder,
+ int action)
+{
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct radeon_encoder *ext_radeon_encoder = to_radeon_encoder(ext_encoder);
+ union external_encoder_control args;
+ struct drm_connector *connector;
+ int index = GetIndexIntoMasterTable(COMMAND, ExternalEncoderControl);
+ u8 frev, crev;
+ int dp_clock = 0;
+ int dp_lane_count = 0;
+ int connector_object_id = 0;
+ u32 ext_enum = (ext_radeon_encoder->encoder_enum & ENUM_ID_MASK) >> ENUM_ID_SHIFT;
+ int bpc = 8;
+
+ if (action == EXTERNAL_ENCODER_ACTION_V3_ENCODER_INIT)
+ connector = radeon_get_connector_for_encoder_init(encoder);
+ else
+ connector = radeon_get_connector_for_encoder(encoder);
+
+ if (connector) {
+ struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+ struct radeon_connector_atom_dig *dig_connector =
+ radeon_connector->con_priv;
+
+ dp_clock = dig_connector->dp_clock;
+ dp_lane_count = dig_connector->dp_lane_count;
+ connector_object_id =
+ (radeon_connector->connector_object_id & OBJECT_ID_MASK) >> OBJECT_ID_SHIFT;
+ bpc = connector->display_info.bpc;
+ }
+
+ memset(&args, 0, sizeof(args));
+
+ if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
+ return;
+
+ switch (frev) {
+ case 1:
+ /* no params on frev 1 */
+ break;
+ case 2:
+ switch (crev) {
+ case 1:
+ case 2:
+ args.v1.sDigEncoder.ucAction = action;
+ args.v1.sDigEncoder.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+ args.v1.sDigEncoder.ucEncoderMode = atombios_get_encoder_mode(encoder);
+
+ if (ENCODER_MODE_IS_DP(args.v1.sDigEncoder.ucEncoderMode)) {
+ if (dp_clock == 270000)
+ args.v1.sDigEncoder.ucConfig |= ATOM_ENCODER_CONFIG_DPLINKRATE_2_70GHZ;
+ args.v1.sDigEncoder.ucLaneNum = dp_lane_count;
+ } else if (radeon_encoder->pixel_clock > 165000)
+ args.v1.sDigEncoder.ucLaneNum = 8;
+ else
+ args.v1.sDigEncoder.ucLaneNum = 4;
+ break;
+ case 3:
+ args.v3.sExtEncoder.ucAction = action;
+ if (action == EXTERNAL_ENCODER_ACTION_V3_ENCODER_INIT)
+ args.v3.sExtEncoder.usConnectorId = cpu_to_le16(connector_object_id);
+ else
+ args.v3.sExtEncoder.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+ args.v3.sExtEncoder.ucEncoderMode = atombios_get_encoder_mode(encoder);
+
+ if (ENCODER_MODE_IS_DP(args.v3.sExtEncoder.ucEncoderMode)) {
+ if (dp_clock == 270000)
+ args.v3.sExtEncoder.ucConfig |= EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_2_70GHZ;
+ else if (dp_clock == 540000)
+ args.v3.sExtEncoder.ucConfig |= EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_5_40GHZ;
+ args.v3.sExtEncoder.ucLaneNum = dp_lane_count;
+ } else if (radeon_encoder->pixel_clock > 165000)
+ args.v3.sExtEncoder.ucLaneNum = 8;
+ else
+ args.v3.sExtEncoder.ucLaneNum = 4;
+ switch (ext_enum) {
+ case GRAPH_OBJECT_ENUM_ID1:
+ args.v3.sExtEncoder.ucConfig |= EXTERNAL_ENCODER_CONFIG_V3_ENCODER1;
+ break;
+ case GRAPH_OBJECT_ENUM_ID2:
+ args.v3.sExtEncoder.ucConfig |= EXTERNAL_ENCODER_CONFIG_V3_ENCODER2;
+ break;
+ case GRAPH_OBJECT_ENUM_ID3:
+ args.v3.sExtEncoder.ucConfig |= EXTERNAL_ENCODER_CONFIG_V3_ENCODER3;
+ break;
+ }
+ switch (bpc) {
+ case 0:
+ args.v3.sExtEncoder.ucBitPerColor = PANEL_BPC_UNDEFINE;
+ break;
+ case 6:
+ args.v3.sExtEncoder.ucBitPerColor = PANEL_6BIT_PER_COLOR;
+ break;
+ case 8:
+ default:
+ args.v3.sExtEncoder.ucBitPerColor = PANEL_8BIT_PER_COLOR;
+ break;
+ case 10:
+ args.v3.sExtEncoder.ucBitPerColor = PANEL_10BIT_PER_COLOR;
+ break;
+ case 12:
+ args.v3.sExtEncoder.ucBitPerColor = PANEL_12BIT_PER_COLOR;
+ break;
+ case 16:
+ args.v3.sExtEncoder.ucBitPerColor = PANEL_16BIT_PER_COLOR;
+ break;
+ }
+ break;
+ default:
+ DRM_ERROR("Unknown table version: %d, %d\n", frev, crev);
+ return;
+ }
+ break;
+ default:
+ DRM_ERROR("Unknown table version: %d, %d\n", frev, crev);
+ return;
+ }
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+}
+
+static void
+atombios_yuv_setup(struct drm_encoder *encoder, bool enable)
+{
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
+ ENABLE_YUV_PS_ALLOCATION args;
+ int index = GetIndexIntoMasterTable(COMMAND, EnableYUV);
+ uint32_t temp, reg;
+
+ memset(&args, 0, sizeof(args));
+
+ if (rdev->family >= CHIP_R600)
+ reg = R600_BIOS_3_SCRATCH;
+ else
+ reg = RADEON_BIOS_3_SCRATCH;
+
+ /* XXX: fix up scratch reg handling */
+ temp = RREG32(reg);
+ if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
+ WREG32(reg, (ATOM_S3_TV1_ACTIVE |
+ (radeon_crtc->crtc_id << 18)));
+ else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
+ WREG32(reg, (ATOM_S3_CV_ACTIVE | (radeon_crtc->crtc_id << 24)));
+ else
+ WREG32(reg, 0);
+
+ if (enable)
+ args.ucEnable = ATOM_ENABLE;
+ args.ucCRTC = radeon_crtc->crtc_id;
+
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+
+ WREG32(reg, temp);
+}
+
+static void
+radeon_atom_encoder_dpms_avivo(struct drm_encoder *encoder, int mode)
+{
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION args;
+ int index = 0;
+
+ memset(&args, 0, sizeof(args));
+
+ switch (radeon_encoder->encoder_id) {
+ case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
+ index = GetIndexIntoMasterTable(COMMAND, TMDSAOutputControl);
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_DVO1:
+ case ENCODER_OBJECT_ID_INTERNAL_DDI:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
+ index = GetIndexIntoMasterTable(COMMAND, DVOOutputControl);
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_LVDS:
+ index = GetIndexIntoMasterTable(COMMAND, LCD1OutputControl);
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
+ if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
+ index = GetIndexIntoMasterTable(COMMAND, LCD1OutputControl);
+ else
+ index = GetIndexIntoMasterTable(COMMAND, LVTMAOutputControl);
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_DAC1:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
+ if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
+ index = GetIndexIntoMasterTable(COMMAND, TV1OutputControl);
+ else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
+ index = GetIndexIntoMasterTable(COMMAND, CV1OutputControl);
+ else
+ index = GetIndexIntoMasterTable(COMMAND, DAC1OutputControl);
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_DAC2:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
+ if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
+ index = GetIndexIntoMasterTable(COMMAND, TV1OutputControl);
+ else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
+ index = GetIndexIntoMasterTable(COMMAND, CV1OutputControl);
+ else
+ index = GetIndexIntoMasterTable(COMMAND, DAC2OutputControl);
+ break;
+ default:
+ return;
+ }
+
+ switch (mode) {
+ case DRM_MODE_DPMS_ON:
+ args.ucAction = ATOM_ENABLE;
+ /* workaround for DVOOutputControl on some RS690 systems */
+ if (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_DDI) {
+ u32 reg = RREG32(RADEON_BIOS_3_SCRATCH);
+ WREG32(RADEON_BIOS_3_SCRATCH, reg & ~ATOM_S3_DFP2I_ACTIVE);
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+ WREG32(RADEON_BIOS_3_SCRATCH, reg);
+ } else
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+ if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
+ args.ucAction = ATOM_LCD_BLON;
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+ }
+ break;
+ case DRM_MODE_DPMS_STANDBY:
+ case DRM_MODE_DPMS_SUSPEND:
+ case DRM_MODE_DPMS_OFF:
+ args.ucAction = ATOM_DISABLE;
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+ if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
+ args.ucAction = ATOM_LCD_BLOFF;
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+ }
+ break;
+ }
+}
+
+static void
+radeon_atom_encoder_dpms_dig(struct drm_encoder *encoder, int mode)
+{
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
+ struct radeon_connector *radeon_connector = NULL;
+ struct radeon_connector_atom_dig *radeon_dig_connector = NULL;
+
+ if (connector) {
+ radeon_connector = to_radeon_connector(connector);
+ radeon_dig_connector = radeon_connector->con_priv;
+ }
+
+ switch (mode) {
+ case DRM_MODE_DPMS_ON:
+ /* some early dce3.2 boards have a bug in their transmitter control table */
+ if ((rdev->family == CHIP_RV710) || (rdev->family == CHIP_RV730))
+ atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0);
+ else
+ atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0);
+ if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(encoder)) && connector) {
+ if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
+ atombios_set_edp_panel_power(connector,
+ ATOM_TRANSMITTER_ACTION_POWER_ON);
+ radeon_dig_connector->edp_on = true;
+ }
+ if (ASIC_IS_DCE4(rdev))
+ atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_VIDEO_OFF, 0);
+ radeon_dp_link_train(encoder, connector);
+ if (ASIC_IS_DCE4(rdev))
+ atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_VIDEO_ON, 0);
+ }
+ if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
+ atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_LCD_BLON, 0, 0);
+ break;
+ case DRM_MODE_DPMS_STANDBY:
+ case DRM_MODE_DPMS_SUSPEND:
+ case DRM_MODE_DPMS_OFF:
+ atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT, 0, 0);
+ if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(encoder)) && connector) {
+ if (ASIC_IS_DCE4(rdev))
+ atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_VIDEO_OFF, 0);
+ if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
+ atombios_set_edp_panel_power(connector,
+ ATOM_TRANSMITTER_ACTION_POWER_OFF);
+ radeon_dig_connector->edp_on = false;
+ }
+ }
+ if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
+ atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_LCD_BLOFF, 0, 0);
+ break;
+ }
+}
+
+static void
+radeon_atom_encoder_dpms_ext(struct drm_encoder *encoder,
+ struct drm_encoder *ext_encoder,
+ int mode)
+{
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
+
+ switch (mode) {
+ case DRM_MODE_DPMS_ON:
+ default:
+ if (ASIC_IS_DCE41(rdev)) {
+ atombios_external_encoder_setup(encoder, ext_encoder,
+ EXTERNAL_ENCODER_ACTION_V3_ENABLE_OUTPUT);
+ atombios_external_encoder_setup(encoder, ext_encoder,
+ EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING_OFF);
+ } else
+ atombios_external_encoder_setup(encoder, ext_encoder, ATOM_ENABLE);
+ break;
+ case DRM_MODE_DPMS_STANDBY:
+ case DRM_MODE_DPMS_SUSPEND:
+ case DRM_MODE_DPMS_OFF:
+ if (ASIC_IS_DCE41(rdev)) {
+ atombios_external_encoder_setup(encoder, ext_encoder,
+ EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING);
+ atombios_external_encoder_setup(encoder, ext_encoder,
+ EXTERNAL_ENCODER_ACTION_V3_DISABLE_OUTPUT);
+ } else
+ atombios_external_encoder_setup(encoder, ext_encoder, ATOM_DISABLE);
+ break;
+ }
+}
+
+static void
+radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode)
+{
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct drm_encoder *ext_encoder = radeon_get_external_encoder(encoder);
+
+ DRM_DEBUG_KMS("encoder dpms %d to mode %d, devices %08x, active_devices %08x\n",
+ radeon_encoder->encoder_id, mode, radeon_encoder->devices,
+ radeon_encoder->active_device);
+ switch (radeon_encoder->encoder_id) {
+ case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
+ case ENCODER_OBJECT_ID_INTERNAL_LVDS:
+ case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
+ case ENCODER_OBJECT_ID_INTERNAL_DVO1:
+ case ENCODER_OBJECT_ID_INTERNAL_DDI:
+ case ENCODER_OBJECT_ID_INTERNAL_DAC2:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
+ radeon_atom_encoder_dpms_avivo(encoder, mode);
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
+ radeon_atom_encoder_dpms_dig(encoder, mode);
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
+ if (ASIC_IS_DCE5(rdev)) {
+ switch (mode) {
+ case DRM_MODE_DPMS_ON:
+ atombios_dvo_setup(encoder, ATOM_ENABLE);
+ break;
+ case DRM_MODE_DPMS_STANDBY:
+ case DRM_MODE_DPMS_SUSPEND:
+ case DRM_MODE_DPMS_OFF:
+ atombios_dvo_setup(encoder, ATOM_DISABLE);
+ break;
+ }
+ } else if (ASIC_IS_DCE3(rdev))
+ radeon_atom_encoder_dpms_dig(encoder, mode);
+ else
+ radeon_atom_encoder_dpms_avivo(encoder, mode);
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_DAC1:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
+ if (ASIC_IS_DCE5(rdev)) {
+ switch (mode) {
+ case DRM_MODE_DPMS_ON:
+ atombios_dac_setup(encoder, ATOM_ENABLE);
+ break;
+ case DRM_MODE_DPMS_STANDBY:
+ case DRM_MODE_DPMS_SUSPEND:
+ case DRM_MODE_DPMS_OFF:
+ atombios_dac_setup(encoder, ATOM_DISABLE);
+ break;
+ }
+ } else
+ radeon_atom_encoder_dpms_avivo(encoder, mode);
+ break;
+ default:
+ return;
+ }
+
+ if (ext_encoder)
+ radeon_atom_encoder_dpms_ext(encoder, ext_encoder, mode);
+
+ radeon_atombios_encoder_dpms_scratch_regs(encoder, (mode == DRM_MODE_DPMS_ON) ? true : false);
+
+}
+
+union crtc_source_param {
+ SELECT_CRTC_SOURCE_PS_ALLOCATION v1;
+ SELECT_CRTC_SOURCE_PARAMETERS_V2 v2;
+};
+
+static void
+atombios_set_encoder_crtc_source(struct drm_encoder *encoder)
+{
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
+ union crtc_source_param args;
+ int index = GetIndexIntoMasterTable(COMMAND, SelectCRTC_Source);
+ uint8_t frev, crev;
+ struct radeon_encoder_atom_dig *dig;
+
+ memset(&args, 0, sizeof(args));
+
+ if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
+ return;
+
+ switch (frev) {
+ case 1:
+ switch (crev) {
+ case 1:
+ default:
+ if (ASIC_IS_AVIVO(rdev))
+ args.v1.ucCRTC = radeon_crtc->crtc_id;
+ else {
+ if (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_DAC1) {
+ args.v1.ucCRTC = radeon_crtc->crtc_id;
+ } else {
+ args.v1.ucCRTC = radeon_crtc->crtc_id << 2;
+ }
+ }
+ switch (radeon_encoder->encoder_id) {
+ case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
+ args.v1.ucDevice = ATOM_DEVICE_DFP1_INDEX;
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_LVDS:
+ case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
+ if (radeon_encoder->devices & ATOM_DEVICE_LCD1_SUPPORT)
+ args.v1.ucDevice = ATOM_DEVICE_LCD1_INDEX;
+ else
+ args.v1.ucDevice = ATOM_DEVICE_DFP3_INDEX;
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_DVO1:
+ case ENCODER_OBJECT_ID_INTERNAL_DDI:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
+ args.v1.ucDevice = ATOM_DEVICE_DFP2_INDEX;
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_DAC1:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
+ if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
+ args.v1.ucDevice = ATOM_DEVICE_TV1_INDEX;
+ else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
+ args.v1.ucDevice = ATOM_DEVICE_CV_INDEX;
+ else
+ args.v1.ucDevice = ATOM_DEVICE_CRT1_INDEX;
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_DAC2:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
+ if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
+ args.v1.ucDevice = ATOM_DEVICE_TV1_INDEX;
+ else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
+ args.v1.ucDevice = ATOM_DEVICE_CV_INDEX;
+ else
+ args.v1.ucDevice = ATOM_DEVICE_CRT2_INDEX;
+ break;
+ }
+ break;
+ case 2:
+ args.v2.ucCRTC = radeon_crtc->crtc_id;
+ if (radeon_encoder_get_dp_bridge_encoder_id(encoder) != ENCODER_OBJECT_ID_NONE) {
+ struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
+
+ if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS)
+ args.v2.ucEncodeMode = ATOM_ENCODER_MODE_LVDS;
+ else if (connector->connector_type == DRM_MODE_CONNECTOR_VGA)
+ args.v2.ucEncodeMode = ATOM_ENCODER_MODE_CRT;
+ else
+ args.v2.ucEncodeMode = atombios_get_encoder_mode(encoder);
+ } else
+ args.v2.ucEncodeMode = atombios_get_encoder_mode(encoder);
+ switch (radeon_encoder->encoder_id) {
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
+ dig = radeon_encoder->enc_priv;
+ switch (dig->dig_encoder) {
+ case 0:
+ args.v2.ucEncoderID = ASIC_INT_DIG1_ENCODER_ID;
+ break;
+ case 1:
+ args.v2.ucEncoderID = ASIC_INT_DIG2_ENCODER_ID;
+ break;
+ case 2:
+ args.v2.ucEncoderID = ASIC_INT_DIG3_ENCODER_ID;
+ break;
+ case 3:
+ args.v2.ucEncoderID = ASIC_INT_DIG4_ENCODER_ID;
+ break;
+ case 4:
+ args.v2.ucEncoderID = ASIC_INT_DIG5_ENCODER_ID;
+ break;
+ case 5:
+ args.v2.ucEncoderID = ASIC_INT_DIG6_ENCODER_ID;
+ break;
+ }
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
+ args.v2.ucEncoderID = ASIC_INT_DVO_ENCODER_ID;
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
+ if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
+ args.v2.ucEncoderID = ASIC_INT_TV_ENCODER_ID;
+ else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
+ args.v2.ucEncoderID = ASIC_INT_TV_ENCODER_ID;
+ else
+ args.v2.ucEncoderID = ASIC_INT_DAC1_ENCODER_ID;
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
+ if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
+ args.v2.ucEncoderID = ASIC_INT_TV_ENCODER_ID;
+ else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
+ args.v2.ucEncoderID = ASIC_INT_TV_ENCODER_ID;
+ else
+ args.v2.ucEncoderID = ASIC_INT_DAC2_ENCODER_ID;
+ break;
+ }
+ break;
+ }
+ break;
+ default:
+ DRM_ERROR("Unknown table version: %d, %d\n", frev, crev);
+ return;
+ }
+
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+
+ /* update scratch regs with new routing */
+ radeon_atombios_encoder_crtc_scratch_regs(encoder, radeon_crtc->crtc_id);
+}
+
+static void
+atombios_apply_encoder_quirks(struct drm_encoder *encoder,
+ struct drm_display_mode *mode)
+{
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
+
+ /* Funky macbooks */
+ if ((dev->pdev->device == 0x71C5) &&
+ (dev->pdev->subsystem_vendor == 0x106b) &&
+ (dev->pdev->subsystem_device == 0x0080)) {
+ if (radeon_encoder->devices & ATOM_DEVICE_LCD1_SUPPORT) {
+ uint32_t lvtma_bit_depth_control = RREG32(AVIVO_LVTMA_BIT_DEPTH_CONTROL);
+
+ lvtma_bit_depth_control &= ~AVIVO_LVTMA_BIT_DEPTH_CONTROL_TRUNCATE_EN;
+ lvtma_bit_depth_control &= ~AVIVO_LVTMA_BIT_DEPTH_CONTROL_SPATIAL_DITHER_EN;
+
+ WREG32(AVIVO_LVTMA_BIT_DEPTH_CONTROL, lvtma_bit_depth_control);
+ }
+ }
+
+ /* set scaler clears this on some chips */
+ if (ASIC_IS_AVIVO(rdev) &&
+ (!(radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT)))) {
+ if (ASIC_IS_DCE4(rdev)) {
+ if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+ WREG32(EVERGREEN_DATA_FORMAT + radeon_crtc->crtc_offset,
+ EVERGREEN_INTERLEAVE_EN);
+ else
+ WREG32(EVERGREEN_DATA_FORMAT + radeon_crtc->crtc_offset, 0);
+ } else {
+ if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+ WREG32(AVIVO_D1MODE_DATA_FORMAT + radeon_crtc->crtc_offset,
+ AVIVO_D1MODE_INTERLEAVE_EN);
+ else
+ WREG32(AVIVO_D1MODE_DATA_FORMAT + radeon_crtc->crtc_offset, 0);
+ }
+ }
+}
+
+static int radeon_atom_pick_dig_encoder(struct drm_encoder *encoder)
+{
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct drm_encoder *test_encoder;
+ struct radeon_encoder_atom_dig *dig;
+ uint32_t dig_enc_in_use = 0;
+
+ /* DCE4/5 */
+ if (ASIC_IS_DCE4(rdev)) {
+ dig = radeon_encoder->enc_priv;
+ if (ASIC_IS_DCE41(rdev)) {
+ /* ontario follows DCE4 */
+ if (rdev->family == CHIP_PALM) {
+ if (dig->linkb)
+ return 1;
+ else
+ return 0;
+ } else
+ /* llano follows DCE3.2 */
+ return radeon_crtc->crtc_id;
+ } else {
+ switch (radeon_encoder->encoder_id) {
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+ if (dig->linkb)
+ return 1;
+ else
+ return 0;
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+ if (dig->linkb)
+ return 3;
+ else
+ return 2;
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+ if (dig->linkb)
+ return 5;
+ else
+ return 4;
+ break;
+ }
+ }
+ }
+
+ /* on DCE32 and encoder can driver any block so just crtc id */
+ if (ASIC_IS_DCE32(rdev)) {
+ return radeon_crtc->crtc_id;
+ }
+
+ /* on DCE3 - LVTMA can only be driven by DIGB */
+ list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) {
+ struct radeon_encoder *radeon_test_encoder;
+
+ if (encoder == test_encoder)
+ continue;
+
+ if (!radeon_encoder_is_digital(test_encoder))
+ continue;
+
+ radeon_test_encoder = to_radeon_encoder(test_encoder);
+ dig = radeon_test_encoder->enc_priv;
+
+ if (dig->dig_encoder >= 0)
+ dig_enc_in_use |= (1 << dig->dig_encoder);
+ }
+
+ if (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA) {
+ if (dig_enc_in_use & 0x2)
+ DRM_ERROR("LVDS required digital encoder 2 but it was in use - stealing\n");
+ return 1;
+ }
+ if (!(dig_enc_in_use & 1))
+ return 0;
+ return 1;
+}
+
+/* This only needs to be called once at startup */
+void
+radeon_atom_encoder_init(struct radeon_device *rdev)
+{
+ struct drm_device *dev = rdev->ddev;
+ struct drm_encoder *encoder;
+
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct drm_encoder *ext_encoder = radeon_get_external_encoder(encoder);
+
+ switch (radeon_encoder->encoder_id) {
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
+ atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_INIT, 0, 0);
+ break;
+ default:
+ break;
+ }
+
+ if (ext_encoder && ASIC_IS_DCE41(rdev))
+ atombios_external_encoder_setup(encoder, ext_encoder,
+ EXTERNAL_ENCODER_ACTION_V3_ENCODER_INIT);
+ }
+}
+
+static void
+radeon_atom_encoder_mode_set(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct drm_encoder *ext_encoder = radeon_get_external_encoder(encoder);
+
+ radeon_encoder->pixel_clock = adjusted_mode->clock;
+
+ if (ASIC_IS_AVIVO(rdev) && !ASIC_IS_DCE4(rdev)) {
+ if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT | ATOM_DEVICE_TV_SUPPORT))
+ atombios_yuv_setup(encoder, true);
+ else
+ atombios_yuv_setup(encoder, false);
+ }
+
+ switch (radeon_encoder->encoder_id) {
+ case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
+ case ENCODER_OBJECT_ID_INTERNAL_LVDS:
+ case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
+ atombios_digital_setup(encoder, PANEL_ENCODER_ACTION_ENABLE);
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
+ if (ASIC_IS_DCE4(rdev)) {
+ /* disable the transmitter */
+ atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0);
+ /* setup and enable the encoder */
+ atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_SETUP, 0);
+
+ /* enable the transmitter */
+ atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0);
+ } else {
+ /* disable the encoder and transmitter */
+ atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0);
+ atombios_dig_encoder_setup(encoder, ATOM_DISABLE, 0);
+
+ /* setup and enable the encoder and transmitter */
+ atombios_dig_encoder_setup(encoder, ATOM_ENABLE, 0);
+ atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_SETUP, 0, 0);
+ atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0);
+ }
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_DDI:
+ case ENCODER_OBJECT_ID_INTERNAL_DVO1:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
+ atombios_dvo_setup(encoder, ATOM_ENABLE);
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_DAC1:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
+ case ENCODER_OBJECT_ID_INTERNAL_DAC2:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
+ atombios_dac_setup(encoder, ATOM_ENABLE);
+ if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT | ATOM_DEVICE_CV_SUPPORT)) {
+ if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT | ATOM_DEVICE_CV_SUPPORT))
+ atombios_tv_setup(encoder, ATOM_ENABLE);
+ else
+ atombios_tv_setup(encoder, ATOM_DISABLE);
+ }
+ break;
+ }
+
+ if (ext_encoder) {
+ if (ASIC_IS_DCE41(rdev))
+ atombios_external_encoder_setup(encoder, ext_encoder,
+ EXTERNAL_ENCODER_ACTION_V3_ENCODER_SETUP);
+ else
+ atombios_external_encoder_setup(encoder, ext_encoder, ATOM_ENABLE);
+ }
+
+ atombios_apply_encoder_quirks(encoder, adjusted_mode);
+
+ if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_HDMI) {
+ r600_hdmi_enable(encoder);
+ r600_hdmi_setmode(encoder, adjusted_mode);
+ }
+}
+
+static bool
+atombios_dac_load_detect(struct drm_encoder *encoder, struct drm_connector *connector)
+{
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+
+ if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT |
+ ATOM_DEVICE_CV_SUPPORT |
+ ATOM_DEVICE_CRT_SUPPORT)) {
+ DAC_LOAD_DETECTION_PS_ALLOCATION args;
+ int index = GetIndexIntoMasterTable(COMMAND, DAC_LoadDetection);
+ uint8_t frev, crev;
+
+ memset(&args, 0, sizeof(args));
+
+ if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
+ return false;
+
+ args.sDacload.ucMisc = 0;
+
+ if ((radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_DAC1) ||
+ (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1))
+ args.sDacload.ucDacType = ATOM_DAC_A;
+ else
+ args.sDacload.ucDacType = ATOM_DAC_B;
+
+ if (radeon_connector->devices & ATOM_DEVICE_CRT1_SUPPORT)
+ args.sDacload.usDeviceID = cpu_to_le16(ATOM_DEVICE_CRT1_SUPPORT);
+ else if (radeon_connector->devices & ATOM_DEVICE_CRT2_SUPPORT)
+ args.sDacload.usDeviceID = cpu_to_le16(ATOM_DEVICE_CRT2_SUPPORT);
+ else if (radeon_connector->devices & ATOM_DEVICE_CV_SUPPORT) {
+ args.sDacload.usDeviceID = cpu_to_le16(ATOM_DEVICE_CV_SUPPORT);
+ if (crev >= 3)
+ args.sDacload.ucMisc = DAC_LOAD_MISC_YPrPb;
+ } else if (radeon_connector->devices & ATOM_DEVICE_TV1_SUPPORT) {
+ args.sDacload.usDeviceID = cpu_to_le16(ATOM_DEVICE_TV1_SUPPORT);
+ if (crev >= 3)
+ args.sDacload.ucMisc = DAC_LOAD_MISC_YPrPb;
+ }
+
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+
+ return true;
+ } else
+ return false;
+}
+
+static enum drm_connector_status
+radeon_atom_dac_detect(struct drm_encoder *encoder, struct drm_connector *connector)
+{
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+ uint32_t bios_0_scratch;
+
+ if (!atombios_dac_load_detect(encoder, connector)) {
+ DRM_DEBUG_KMS("detect returned false \n");
+ return connector_status_unknown;
+ }
+
+ if (rdev->family >= CHIP_R600)
+ bios_0_scratch = RREG32(R600_BIOS_0_SCRATCH);
+ else
+ bios_0_scratch = RREG32(RADEON_BIOS_0_SCRATCH);
+
+ DRM_DEBUG_KMS("Bios 0 scratch %x %08x\n", bios_0_scratch, radeon_encoder->devices);
+ if (radeon_connector->devices & ATOM_DEVICE_CRT1_SUPPORT) {
+ if (bios_0_scratch & ATOM_S0_CRT1_MASK)
+ return connector_status_connected;
+ }
+ if (radeon_connector->devices & ATOM_DEVICE_CRT2_SUPPORT) {
+ if (bios_0_scratch & ATOM_S0_CRT2_MASK)
+ return connector_status_connected;
+ }
+ if (radeon_connector->devices & ATOM_DEVICE_CV_SUPPORT) {
+ if (bios_0_scratch & (ATOM_S0_CV_MASK|ATOM_S0_CV_MASK_A))
+ return connector_status_connected;
+ }
+ if (radeon_connector->devices & ATOM_DEVICE_TV1_SUPPORT) {
+ if (bios_0_scratch & (ATOM_S0_TV1_COMPOSITE | ATOM_S0_TV1_COMPOSITE_A))
+ return connector_status_connected; /* CTV */
+ else if (bios_0_scratch & (ATOM_S0_TV1_SVIDEO | ATOM_S0_TV1_SVIDEO_A))
+ return connector_status_connected; /* STV */
+ }
+ return connector_status_disconnected;
+}
+
+static enum drm_connector_status
+radeon_atom_dig_detect(struct drm_encoder *encoder, struct drm_connector *connector)
+{
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+ struct drm_encoder *ext_encoder = radeon_get_external_encoder(encoder);
+ u32 bios_0_scratch;
+
+ if (!ASIC_IS_DCE4(rdev))
+ return connector_status_unknown;
+
+ if (!ext_encoder)
+ return connector_status_unknown;
+
+ if ((radeon_connector->devices & ATOM_DEVICE_CRT_SUPPORT) == 0)
+ return connector_status_unknown;
+
+ /* load detect on the dp bridge */
+ atombios_external_encoder_setup(encoder, ext_encoder,
+ EXTERNAL_ENCODER_ACTION_V3_DACLOAD_DETECTION);
+
+ bios_0_scratch = RREG32(R600_BIOS_0_SCRATCH);
+
+ DRM_DEBUG_KMS("Bios 0 scratch %x %08x\n", bios_0_scratch, radeon_encoder->devices);
+ if (radeon_connector->devices & ATOM_DEVICE_CRT1_SUPPORT) {
+ if (bios_0_scratch & ATOM_S0_CRT1_MASK)
+ return connector_status_connected;
+ }
+ if (radeon_connector->devices & ATOM_DEVICE_CRT2_SUPPORT) {
+ if (bios_0_scratch & ATOM_S0_CRT2_MASK)
+ return connector_status_connected;
+ }
+ if (radeon_connector->devices & ATOM_DEVICE_CV_SUPPORT) {
+ if (bios_0_scratch & (ATOM_S0_CV_MASK|ATOM_S0_CV_MASK_A))
+ return connector_status_connected;
+ }
+ if (radeon_connector->devices & ATOM_DEVICE_TV1_SUPPORT) {
+ if (bios_0_scratch & (ATOM_S0_TV1_COMPOSITE | ATOM_S0_TV1_COMPOSITE_A))
+ return connector_status_connected; /* CTV */
+ else if (bios_0_scratch & (ATOM_S0_TV1_SVIDEO | ATOM_S0_TV1_SVIDEO_A))
+ return connector_status_connected; /* STV */
+ }
+ return connector_status_disconnected;
+}
+
+void
+radeon_atom_ext_encoder_setup_ddc(struct drm_encoder *encoder)
+{
+ struct drm_encoder *ext_encoder = radeon_get_external_encoder(encoder);
+
+ if (ext_encoder)
+ /* ddc_setup on the dp bridge */
+ atombios_external_encoder_setup(encoder, ext_encoder,
+ EXTERNAL_ENCODER_ACTION_V3_DDC_SETUP);
+
+}
+
+static void radeon_atom_encoder_prepare(struct drm_encoder *encoder)
+{
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
+
+ if ((radeon_encoder->active_device &
+ (ATOM_DEVICE_DFP_SUPPORT | ATOM_DEVICE_LCD_SUPPORT)) ||
+ (radeon_encoder_get_dp_bridge_encoder_id(encoder) !=
+ ENCODER_OBJECT_ID_NONE)) {
+ struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
+ if (dig)
+ dig->dig_encoder = radeon_atom_pick_dig_encoder(encoder);
+ }
+
+ radeon_atom_output_lock(encoder, true);
+ radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
+
+ if (connector) {
+ struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+
+ /* select the clock/data port if it uses a router */
+ if (radeon_connector->router.cd_valid)
+ radeon_router_select_cd_port(radeon_connector);
+
+ /* turn eDP panel on for mode set */
+ if (connector->connector_type == DRM_MODE_CONNECTOR_eDP)
+ atombios_set_edp_panel_power(connector,
+ ATOM_TRANSMITTER_ACTION_POWER_ON);
+ }
+
+ /* this is needed for the pll/ss setup to work correctly in some cases */
+ atombios_set_encoder_crtc_source(encoder);
+}
+
+static void radeon_atom_encoder_commit(struct drm_encoder *encoder)
+{
+ radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_ON);
+ radeon_atom_output_lock(encoder, false);
+}
+
+static void radeon_atom_encoder_disable(struct drm_encoder *encoder)
+{
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct radeon_encoder_atom_dig *dig;
+
+ /* check for pre-DCE3 cards with shared encoders;
+ * can't really use the links individually, so don't disable
+ * the encoder if it's in use by another connector
+ */
+ if (!ASIC_IS_DCE3(rdev)) {
+ struct drm_encoder *other_encoder;
+ struct radeon_encoder *other_radeon_encoder;
+
+ list_for_each_entry(other_encoder, &dev->mode_config.encoder_list, head) {
+ other_radeon_encoder = to_radeon_encoder(other_encoder);
+ if ((radeon_encoder->encoder_id == other_radeon_encoder->encoder_id) &&
+ drm_helper_encoder_in_use(other_encoder))
+ goto disable_done;
+ }
+ }
+
+ radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
+
+ switch (radeon_encoder->encoder_id) {
+ case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
+ case ENCODER_OBJECT_ID_INTERNAL_LVDS:
+ case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
+ atombios_digital_setup(encoder, PANEL_ENCODER_ACTION_DISABLE);
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
+ if (ASIC_IS_DCE4(rdev))
+ /* disable the transmitter */
+ atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0);
+ else {
+ /* disable the encoder and transmitter */
+ atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0);
+ atombios_dig_encoder_setup(encoder, ATOM_DISABLE, 0);
+ }
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_DDI:
+ case ENCODER_OBJECT_ID_INTERNAL_DVO1:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
+ atombios_dvo_setup(encoder, ATOM_DISABLE);
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_DAC1:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
+ case ENCODER_OBJECT_ID_INTERNAL_DAC2:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
+ atombios_dac_setup(encoder, ATOM_DISABLE);
+ if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT | ATOM_DEVICE_CV_SUPPORT))
+ atombios_tv_setup(encoder, ATOM_DISABLE);
+ break;
+ }
+
+disable_done:
+ if (radeon_encoder_is_digital(encoder)) {
+ if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_HDMI)
+ r600_hdmi_disable(encoder);
+ dig = radeon_encoder->enc_priv;
+ dig->dig_encoder = -1;
+ }
+ radeon_encoder->active_device = 0;
+}
+
+/* these are handled by the primary encoders */
+static void radeon_atom_ext_prepare(struct drm_encoder *encoder)
+{
+
+}
+
+static void radeon_atom_ext_commit(struct drm_encoder *encoder)
+{
+
+}
+
+static void
+radeon_atom_ext_mode_set(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+
+}
+
+static void radeon_atom_ext_disable(struct drm_encoder *encoder)
+{
+
+}
+
+static void
+radeon_atom_ext_dpms(struct drm_encoder *encoder, int mode)
+{
+
+}
+
+static bool radeon_atom_ext_mode_fixup(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ return true;
+}
+
+static const struct drm_encoder_helper_funcs radeon_atom_ext_helper_funcs = {
+ .dpms = radeon_atom_ext_dpms,
+ .mode_fixup = radeon_atom_ext_mode_fixup,
+ .prepare = radeon_atom_ext_prepare,
+ .mode_set = radeon_atom_ext_mode_set,
+ .commit = radeon_atom_ext_commit,
+ .disable = radeon_atom_ext_disable,
+ /* no detect for TMDS/LVDS yet */
+};
+
+static const struct drm_encoder_helper_funcs radeon_atom_dig_helper_funcs = {
+ .dpms = radeon_atom_encoder_dpms,
+ .mode_fixup = radeon_atom_mode_fixup,
+ .prepare = radeon_atom_encoder_prepare,
+ .mode_set = radeon_atom_encoder_mode_set,
+ .commit = radeon_atom_encoder_commit,
+ .disable = radeon_atom_encoder_disable,
+ .detect = radeon_atom_dig_detect,
+};
+
+static const struct drm_encoder_helper_funcs radeon_atom_dac_helper_funcs = {
+ .dpms = radeon_atom_encoder_dpms,
+ .mode_fixup = radeon_atom_mode_fixup,
+ .prepare = radeon_atom_encoder_prepare,
+ .mode_set = radeon_atom_encoder_mode_set,
+ .commit = radeon_atom_encoder_commit,
+ .detect = radeon_atom_dac_detect,
+};
+
+void radeon_enc_destroy(struct drm_encoder *encoder)
+{
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ kfree(radeon_encoder->enc_priv);
+ drm_encoder_cleanup(encoder);
+ kfree(radeon_encoder);
+}
+
+static const struct drm_encoder_funcs radeon_atom_enc_funcs = {
+ .destroy = radeon_enc_destroy,
+};
+
+struct radeon_encoder_atom_dac *
+radeon_atombios_set_dac_info(struct radeon_encoder *radeon_encoder)
+{
+ struct drm_device *dev = radeon_encoder->base.dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_encoder_atom_dac *dac = kzalloc(sizeof(struct radeon_encoder_atom_dac), GFP_KERNEL);
+
+ if (!dac)
+ return NULL;
+
+ dac->tv_std = radeon_atombios_get_tv_info(rdev);
+ return dac;
+}
+
+struct radeon_encoder_atom_dig *
+radeon_atombios_set_dig_info(struct radeon_encoder *radeon_encoder)
+{
+ int encoder_enum = (radeon_encoder->encoder_enum & ENUM_ID_MASK) >> ENUM_ID_SHIFT;
+ struct radeon_encoder_atom_dig *dig = kzalloc(sizeof(struct radeon_encoder_atom_dig), GFP_KERNEL);
+
+ if (!dig)
+ return NULL;
+
+ /* coherent mode by default */
+ dig->coherent_mode = true;
+ dig->dig_encoder = -1;
+
+ if (encoder_enum == 2)
+ dig->linkb = true;
+ else
+ dig->linkb = false;
+
+ return dig;
+}
+
+void
+radeon_add_atom_encoder(struct drm_device *dev,
+ uint32_t encoder_enum,
+ uint32_t supported_device,
+ u16 caps)
+{
+ struct radeon_device *rdev = dev->dev_private;
+ struct drm_encoder *encoder;
+ struct radeon_encoder *radeon_encoder;
+
+ /* see if we already added it */
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+ radeon_encoder = to_radeon_encoder(encoder);
+ if (radeon_encoder->encoder_enum == encoder_enum) {
+ radeon_encoder->devices |= supported_device;
+ return;
+ }
+
+ }
+
+ /* add a new one */
+ radeon_encoder = kzalloc(sizeof(struct radeon_encoder), GFP_KERNEL);
+ if (!radeon_encoder)
+ return;
+
+ encoder = &radeon_encoder->base;
+ switch (rdev->num_crtc) {
+ case 1:
+ encoder->possible_crtcs = 0x1;
+ break;
+ case 2:
+ default:
+ encoder->possible_crtcs = 0x3;
+ break;
+ case 4:
+ encoder->possible_crtcs = 0xf;
+ break;
+ case 6:
+ encoder->possible_crtcs = 0x3f;
+ break;
+ }
+
+ radeon_encoder->enc_priv = NULL;
+
+ radeon_encoder->encoder_enum = encoder_enum;
+ radeon_encoder->encoder_id = (encoder_enum & OBJECT_ID_MASK) >> OBJECT_ID_SHIFT;
+ radeon_encoder->devices = supported_device;
+ radeon_encoder->rmx_type = RMX_OFF;
+ radeon_encoder->underscan_type = UNDERSCAN_OFF;
+ radeon_encoder->is_ext_encoder = false;
+ radeon_encoder->caps = caps;
+
+ switch (radeon_encoder->encoder_id) {
+ case ENCODER_OBJECT_ID_INTERNAL_LVDS:
+ case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
+ case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
+ if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
+ radeon_encoder->rmx_type = RMX_FULL;
+ drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_LVDS);
+ radeon_encoder->enc_priv = radeon_atombios_get_lvds_info(radeon_encoder);
+ } else {
+ drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_TMDS);
+ radeon_encoder->enc_priv = radeon_atombios_set_dig_info(radeon_encoder);
+ }
+ drm_encoder_helper_add(encoder, &radeon_atom_dig_helper_funcs);
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_DAC1:
+ drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_DAC);
+ radeon_encoder->enc_priv = radeon_atombios_set_dac_info(radeon_encoder);
+ drm_encoder_helper_add(encoder, &radeon_atom_dac_helper_funcs);
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_DAC2:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
+ drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_TVDAC);
+ radeon_encoder->enc_priv = radeon_atombios_set_dac_info(radeon_encoder);
+ drm_encoder_helper_add(encoder, &radeon_atom_dac_helper_funcs);
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_DVO1:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
+ case ENCODER_OBJECT_ID_INTERNAL_DDI:
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+ if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
+ radeon_encoder->rmx_type = RMX_FULL;
+ drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_LVDS);
+ radeon_encoder->enc_priv = radeon_atombios_get_lvds_info(radeon_encoder);
+ } else if (radeon_encoder->devices & (ATOM_DEVICE_CRT_SUPPORT)) {
+ drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_DAC);
+ radeon_encoder->enc_priv = radeon_atombios_set_dig_info(radeon_encoder);
+ } else {
+ drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_TMDS);
+ radeon_encoder->enc_priv = radeon_atombios_set_dig_info(radeon_encoder);
+ }
+ drm_encoder_helper_add(encoder, &radeon_atom_dig_helper_funcs);
+ break;
+ case ENCODER_OBJECT_ID_SI170B:
+ case ENCODER_OBJECT_ID_CH7303:
+ case ENCODER_OBJECT_ID_EXTERNAL_SDVOA:
+ case ENCODER_OBJECT_ID_EXTERNAL_SDVOB:
+ case ENCODER_OBJECT_ID_TITFP513:
+ case ENCODER_OBJECT_ID_VT1623:
+ case ENCODER_OBJECT_ID_HDMI_SI1930:
+ case ENCODER_OBJECT_ID_TRAVIS:
+ case ENCODER_OBJECT_ID_NUTMEG:
+ /* these are handled by the primary encoders */
+ radeon_encoder->is_ext_encoder = true;
+ if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
+ drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_LVDS);
+ else if (radeon_encoder->devices & (ATOM_DEVICE_CRT_SUPPORT))
+ drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_DAC);
+ else
+ drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_TMDS);
+ drm_encoder_helper_add(encoder, &radeon_atom_ext_helper_funcs);
+ break;
+ }
+}
return actual_temp * 1000;
}
+void sumo_pm_init_profile(struct radeon_device *rdev)
+{
+ int idx;
+
+ /* default */
+ rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_off_ps_idx = rdev->pm.default_power_state_index;
+ rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
+ rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_on_cm_idx = 0;
+
+ /* low,mid sh/mh */
+ if (rdev->flags & RADEON_IS_MOBILITY)
+ idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
+ else
+ idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
+
+ rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+
+ rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 0;
+
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 0;
+
+ /* high sh/mh */
+ idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
+ rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_cm_idx =
+ rdev->pm.power_state[idx].num_clock_modes - 1;
+
+ rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_cm_idx =
+ rdev->pm.power_state[idx].num_clock_modes - 1;
+}
+
void evergreen_pm_misc(struct radeon_device *rdev)
{
int req_ps_idx = rdev->pm.requested_power_state_index;
default:
break;
}
+ radeon_hpd_set_polarity(rdev, radeon_connector->hpd.hpd);
}
if (rdev->irq.installed)
evergreen_irq_set(rdev);
u32 tmp;
int r;
- if (rdev->gart.table.vram.robj == NULL) {
+ if (rdev->gart.robj == NULL) {
dev_err(rdev->dev, "No VRAM object for PCIE GART.\n");
return -EINVAL;
}
void evergreen_pcie_gart_disable(struct radeon_device *rdev)
{
u32 tmp;
- int r;
/* Disable all tables */
WREG32(VM_CONTEXT0_CNTL, 0);
WREG32(MC_VM_MB_L1_TLB1_CNTL, tmp);
WREG32(MC_VM_MB_L1_TLB2_CNTL, tmp);
WREG32(MC_VM_MB_L1_TLB3_CNTL, tmp);
- if (rdev->gart.table.vram.robj) {
- r = radeon_bo_reserve(rdev->gart.table.vram.robj, false);
- if (likely(r == 0)) {
- radeon_bo_kunmap(rdev->gart.table.vram.robj);
- radeon_bo_unpin(rdev->gart.table.vram.robj);
- radeon_bo_unreserve(rdev->gart.table.vram.robj);
- }
- }
+ radeon_gart_table_vram_unpin(rdev);
}
void evergreen_pcie_gart_fini(struct radeon_device *rdev)
WREG32(MC_VM_SYSTEM_APERTURE_HIGH_ADDR,
rdev->mc.vram_end >> 12);
}
- WREG32(MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR, 0);
+ WREG32(MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR, rdev->vram_scratch.gpu_addr >> 12);
if (rdev->flags & RADEON_IS_IGP) {
tmp = RREG32(MC_FUS_VM_FB_OFFSET) & 0x000FFFFF;
tmp |= ((rdev->mc.vram_end >> 20) & 0xF) << 24;
}
}
+ r = r600_vram_scratch_init(rdev);
+ if (r)
+ return r;
+
evergreen_mc_program(rdev);
if (rdev->flags & RADEON_IS_AGP) {
evergreen_agp_enable(rdev);
radeon_ib_pool_fini(rdev);
radeon_irq_kms_fini(rdev);
evergreen_pcie_gart_fini(rdev);
+ r600_vram_scratch_fini(rdev);
radeon_gem_fini(rdev);
radeon_fence_driver_fini(rdev);
radeon_agp_fini(rdev);
else
cp_coher_size = ((size + 255) >> 8);
+ if (rdev->family >= CHIP_CAYMAN) {
+ /* CP_COHER_CNTL2 has to be set manually when submitting a surface_sync
+ * to the RB directly. For IBs, the CP programs this as part of the
+ * surface_sync packet.
+ */
+ radeon_ring_write(rdev, PACKET3(PACKET3_SET_CONFIG_REG, 1));
+ radeon_ring_write(rdev, (0x85e8 - PACKET3_SET_CONFIG_REG_START) >> 2);
+ radeon_ring_write(rdev, 0); /* CP_COHER_CNTL2 */
+ }
radeon_ring_write(rdev, PACKET3(PACKET3_SURFACE_SYNC, 3));
radeon_ring_write(rdev, sync_type);
radeon_ring_write(rdev, cp_coher_size);
static void
set_tex_resource(struct radeon_device *rdev,
int format, int w, int h, int pitch,
- u64 gpu_addr)
+ u64 gpu_addr, u32 size)
{
u32 sq_tex_resource_word0, sq_tex_resource_word1;
u32 sq_tex_resource_word4, sq_tex_resource_word7;
sq_tex_resource_word7 = format |
S__SQ_CONSTANT_TYPE(SQ_TEX_VTX_VALID_TEXTURE);
+ cp_set_surface_sync(rdev,
+ PACKET3_TC_ACTION_ENA, size, gpu_addr);
+
radeon_ring_write(rdev, PACKET3(PACKET3_SET_RESOURCE, 8));
radeon_ring_write(rdev, 0);
radeon_ring_write(rdev, sq_tex_resource_word0);
rdev->r600_blit.primitives.set_default_state = set_default_state;
rdev->r600_blit.ring_size_common = 55; /* shaders + def state */
- rdev->r600_blit.ring_size_common += 10; /* fence emit for VB IB */
+ rdev->r600_blit.ring_size_common += 16; /* fence emit for VB IB */
rdev->r600_blit.ring_size_common += 5; /* done copy */
- rdev->r600_blit.ring_size_common += 10; /* fence emit for done copy */
+ rdev->r600_blit.ring_size_common += 16; /* fence emit for done copy */
rdev->r600_blit.ring_size_per_loop = 74;
+ if (rdev->family >= CHIP_CAYMAN)
+ rdev->r600_blit.ring_size_per_loop += 9; /* additional DWs for surface sync */
rdev->r600_blit.max_dim = 16384;
#include <linux/firmware.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include "drmP.h"
#include "radeon.h"
#include "radeon_asic.h"
WREG32(MC_SEQ_SUP_CNTL, 0x00000001);
/* wait for training to complete */
- while (!(RREG32(MC_IO_PAD_CNTL_D0) & MEM_FALL_OUT_CMD))
- udelay(10);
+ for (i = 0; i < rdev->usec_timeout; i++) {
+ if (RREG32(MC_IO_PAD_CNTL_D0) & MEM_FALL_OUT_CMD)
+ break;
+ udelay(1);
+ }
if (running)
WREG32(MC_SHARED_BLACKOUT_CNTL, blackout);
{
int r;
- if (rdev->gart.table.vram.robj == NULL) {
+ if (rdev->gart.robj == NULL) {
dev_err(rdev->dev, "No VRAM object for PCIE GART.\n");
return -EINVAL;
}
void cayman_pcie_gart_disable(struct radeon_device *rdev)
{
- int r;
-
/* Disable all tables */
WREG32(VM_CONTEXT0_CNTL, 0);
WREG32(VM_CONTEXT1_CNTL, 0);
WREG32(VM_L2_CNTL2, 0);
WREG32(VM_L2_CNTL3, L2_CACHE_BIGK_ASSOCIATIVITY |
L2_CACHE_BIGK_FRAGMENT_SIZE(6));
- if (rdev->gart.table.vram.robj) {
- r = radeon_bo_reserve(rdev->gart.table.vram.robj, false);
- if (likely(r == 0)) {
- radeon_bo_kunmap(rdev->gart.table.vram.robj);
- radeon_bo_unpin(rdev->gart.table.vram.robj);
- radeon_bo_unreserve(rdev->gart.table.vram.robj);
- }
- }
+ radeon_gart_table_vram_unpin(rdev);
}
void cayman_pcie_gart_fini(struct radeon_device *rdev)
return r;
}
+ r = r600_vram_scratch_init(rdev);
+ if (r)
+ return r;
+
evergreen_mc_program(rdev);
r = cayman_pcie_gart_enable(rdev);
if (r)
radeon_ib_pool_fini(rdev);
radeon_irq_kms_fini(rdev);
cayman_pcie_gart_fini(rdev);
+ r600_vram_scratch_fini(rdev);
radeon_gem_fini(rdev);
radeon_fence_driver_fini(rdev);
radeon_bo_fini(rdev);
#include <linux/firmware.h>
#include <linux/platform_device.h>
+#include <linux/module.h>
#include "r100_reg_safe.h"
#include "rn50_reg_safe.h"
default:
break;
}
+ radeon_hpd_set_polarity(rdev, radeon_connector->hpd.hpd);
}
if (rdev->irq.installed)
r100_irq_set(rdev);
{
int r;
- if (rdev->gart.table.ram.ptr) {
+ if (rdev->gart.ptr) {
WARN(1, "R100 PCI GART already initialized\n");
return 0;
}
int r100_pci_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr)
{
+ u32 *gtt = rdev->gart.ptr;
+
if (i < 0 || i > rdev->gart.num_gpu_pages) {
return -EINVAL;
}
- rdev->gart.table.ram.ptr[i] = cpu_to_le32(lower_32_bits(addr));
+ gtt[i] = cpu_to_le32(lower_32_bits(addr));
return 0;
}
int rv370_pcie_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr)
{
- void __iomem *ptr = (void *)rdev->gart.table.vram.ptr;
+ void __iomem *ptr = rdev->gart.ptr;
if (i < 0 || i > rdev->gart.num_gpu_pages) {
return -EINVAL;
{
int r;
- if (rdev->gart.table.vram.robj) {
+ if (rdev->gart.robj) {
WARN(1, "RV370 PCIE GART already initialized\n");
return 0;
}
uint32_t tmp;
int r;
- if (rdev->gart.table.vram.robj == NULL) {
+ if (rdev->gart.robj == NULL) {
dev_err(rdev->dev, "No VRAM object for PCIE GART.\n");
return -EINVAL;
}
void rv370_pcie_gart_disable(struct radeon_device *rdev)
{
u32 tmp;
- int r;
WREG32_PCIE(RADEON_PCIE_TX_GART_START_LO, 0);
WREG32_PCIE(RADEON_PCIE_TX_GART_END_LO, 0);
tmp = RREG32_PCIE(RADEON_PCIE_TX_GART_CNTL);
tmp |= RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_DISCARD;
WREG32_PCIE(RADEON_PCIE_TX_GART_CNTL, tmp & ~RADEON_PCIE_TX_GART_EN);
- if (rdev->gart.table.vram.robj) {
- r = radeon_bo_reserve(rdev->gart.table.vram.robj, false);
- if (likely(r == 0)) {
- radeon_bo_kunmap(rdev->gart.table.vram.robj);
- radeon_bo_unpin(rdev->gart.table.vram.robj);
- radeon_bo_unreserve(rdev->gart.table.vram.robj);
- }
- }
+ radeon_gart_table_vram_unpin(rdev);
}
void rv370_pcie_gart_fini(struct radeon_device *rdev)
#include <linux/seq_file.h>
#include <linux/firmware.h>
#include <linux/platform_device.h>
+#include <linux/module.h>
#include "drmP.h"
#include "radeon_drm.h"
#include "radeon.h"
pcie_lanes);
}
-static int r600_pm_get_type_index(struct radeon_device *rdev,
- enum radeon_pm_state_type ps_type,
- int instance)
-{
- int i;
- int found_instance = -1;
-
- for (i = 0; i < rdev->pm.num_power_states; i++) {
- if (rdev->pm.power_state[i].type == ps_type) {
- found_instance++;
- if (found_instance == instance)
- return i;
- }
- }
- /* return default if no match */
- return rdev->pm.default_power_state_index;
-}
-
void rs780_pm_init_profile(struct radeon_device *rdev)
{
if (rdev->pm.num_power_states == 2) {
void r600_pm_init_profile(struct radeon_device *rdev)
{
+ int idx;
+
if (rdev->family == CHIP_R600) {
/* XXX */
/* default */
rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_off_cm_idx = 0;
rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_on_cm_idx = 2;
/* low sh */
- if (rdev->flags & RADEON_IS_MOBILITY) {
- rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
- rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
- rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
- rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
- } else {
- rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
- rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
- rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
- rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
- }
+ if (rdev->flags & RADEON_IS_MOBILITY)
+ idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
+ else
+ idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
+ rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
/* mid sh */
- if (rdev->flags & RADEON_IS_MOBILITY) {
- rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
- rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
- rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
- rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 1;
- } else {
- rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
- rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
- rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
- rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 1;
- }
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 1;
/* high sh */
- rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
- rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
+ idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
+ rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = idx;
rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_cm_idx = 0;
rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_cm_idx = 2;
/* low mh */
- if (rdev->flags & RADEON_IS_MOBILITY) {
- rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1);
- rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1);
- rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
- rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
- } else {
- rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
- rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
- rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
- rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
- }
+ if (rdev->flags & RADEON_IS_MOBILITY)
+ idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1);
+ else
+ idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
+ rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
/* mid mh */
- if (rdev->flags & RADEON_IS_MOBILITY) {
- rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1);
- rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1);
- rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
- rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 1;
- } else {
- rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
- rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
- rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
- rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 1;
- }
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 1;
/* high mh */
- rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
- rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
+ idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
+ rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = idx;
rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_cm_idx = 0;
rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_cm_idx = 2;
}
struct drm_device *dev = rdev->ddev;
struct drm_connector *connector;
- if (ASIC_IS_DCE3(rdev)) {
- u32 tmp = DC_HPDx_CONNECTION_TIMER(0x9c4) | DC_HPDx_RX_INT_TIMER(0xfa);
- if (ASIC_IS_DCE32(rdev))
- tmp |= DC_HPDx_EN;
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+ struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+
+ if (ASIC_IS_DCE3(rdev)) {
+ u32 tmp = DC_HPDx_CONNECTION_TIMER(0x9c4) | DC_HPDx_RX_INT_TIMER(0xfa);
+ if (ASIC_IS_DCE32(rdev))
+ tmp |= DC_HPDx_EN;
- list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- struct radeon_connector *radeon_connector = to_radeon_connector(connector);
switch (radeon_connector->hpd.hpd) {
case RADEON_HPD_1:
WREG32(DC_HPD1_CONTROL, tmp);
default:
break;
}
- }
- } else {
- list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+ } else {
switch (radeon_connector->hpd.hpd) {
case RADEON_HPD_1:
WREG32(DC_HOT_PLUG_DETECT1_CONTROL, DC_HOT_PLUG_DETECTx_EN);
break;
}
}
+ radeon_hpd_set_polarity(rdev, radeon_connector->hpd.hpd);
}
if (rdev->irq.installed)
r600_irq_set(rdev);
/* flush hdp cache so updates hit vram */
if ((rdev->family >= CHIP_RV770) && (rdev->family <= CHIP_RV740) &&
!(rdev->flags & RADEON_IS_AGP)) {
- void __iomem *ptr = (void *)rdev->gart.table.vram.ptr;
+ void __iomem *ptr = (void *)rdev->gart.ptr;
u32 tmp;
/* r7xx hw bug. write to HDP_DEBUG1 followed by fb read
{
int r;
- if (rdev->gart.table.vram.robj) {
+ if (rdev->gart.robj) {
WARN(1, "R600 PCIE GART already initialized\n");
return 0;
}
u32 tmp;
int r, i;
- if (rdev->gart.table.vram.robj == NULL) {
+ if (rdev->gart.robj == NULL) {
dev_err(rdev->dev, "No VRAM object for PCIE GART.\n");
return -EINVAL;
}
void r600_pcie_gart_disable(struct radeon_device *rdev)
{
u32 tmp;
- int i, r;
+ int i;
/* Disable all tables */
for (i = 0; i < 7; i++)
WREG32(MC_VM_L1_TLB_MCB_WR_SYS_CNTL, tmp);
WREG32(MC_VM_L1_TLB_MCB_RD_HDP_CNTL, tmp);
WREG32(MC_VM_L1_TLB_MCB_WR_HDP_CNTL, tmp);
- if (rdev->gart.table.vram.robj) {
- r = radeon_bo_reserve(rdev->gart.table.vram.robj, false);
- if (likely(r == 0)) {
- radeon_bo_kunmap(rdev->gart.table.vram.robj);
- radeon_bo_unpin(rdev->gart.table.vram.robj);
- radeon_bo_unreserve(rdev->gart.table.vram.robj);
- }
- }
+ radeon_gart_table_vram_unpin(rdev);
}
void r600_pcie_gart_fini(struct radeon_device *rdev)
WREG32(MC_VM_SYSTEM_APERTURE_LOW_ADDR, rdev->mc.vram_start >> 12);
WREG32(MC_VM_SYSTEM_APERTURE_HIGH_ADDR, rdev->mc.vram_end >> 12);
}
- WREG32(MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR, 0);
+ WREG32(MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR, rdev->vram_scratch.gpu_addr >> 12);
tmp = ((rdev->mc.vram_end >> 24) & 0xFFFF) << 16;
tmp |= ((rdev->mc.vram_start >> 24) & 0xFFFF);
WREG32(MC_VM_FB_LOCATION, tmp);
return 0;
}
+int r600_vram_scratch_init(struct radeon_device *rdev)
+{
+ int r;
+
+ if (rdev->vram_scratch.robj == NULL) {
+ r = radeon_bo_create(rdev, RADEON_GPU_PAGE_SIZE,
+ PAGE_SIZE, true, RADEON_GEM_DOMAIN_VRAM,
+ &rdev->vram_scratch.robj);
+ if (r) {
+ return r;
+ }
+ }
+
+ r = radeon_bo_reserve(rdev->vram_scratch.robj, false);
+ if (unlikely(r != 0))
+ return r;
+ r = radeon_bo_pin(rdev->vram_scratch.robj,
+ RADEON_GEM_DOMAIN_VRAM, &rdev->vram_scratch.gpu_addr);
+ if (r) {
+ radeon_bo_unreserve(rdev->vram_scratch.robj);
+ return r;
+ }
+ r = radeon_bo_kmap(rdev->vram_scratch.robj,
+ (void **)&rdev->vram_scratch.ptr);
+ if (r)
+ radeon_bo_unpin(rdev->vram_scratch.robj);
+ radeon_bo_unreserve(rdev->vram_scratch.robj);
+
+ return r;
+}
+
+void r600_vram_scratch_fini(struct radeon_device *rdev)
+{
+ int r;
+
+ if (rdev->vram_scratch.robj == NULL) {
+ return;
+ }
+ r = radeon_bo_reserve(rdev->vram_scratch.robj, false);
+ if (likely(r == 0)) {
+ radeon_bo_kunmap(rdev->vram_scratch.robj);
+ radeon_bo_unpin(rdev->vram_scratch.robj);
+ radeon_bo_unreserve(rdev->vram_scratch.robj);
+ }
+ radeon_bo_unref(&rdev->vram_scratch.robj);
+}
+
/* We doesn't check that the GPU really needs a reset we simply do the
* reset, it's up to the caller to determine if the GPU needs one. We
* might add an helper function to check that.
if (rdev->wb.use_event) {
u64 addr = rdev->wb.gpu_addr + R600_WB_EVENT_OFFSET +
(u64)(rdev->fence_drv.scratch_reg - rdev->scratch.reg_base);
+ /* flush read cache over gart */
+ radeon_ring_write(rdev, PACKET3(PACKET3_SURFACE_SYNC, 3));
+ radeon_ring_write(rdev, PACKET3_TC_ACTION_ENA |
+ PACKET3_VC_ACTION_ENA |
+ PACKET3_SH_ACTION_ENA);
+ radeon_ring_write(rdev, 0xFFFFFFFF);
+ radeon_ring_write(rdev, 0);
+ radeon_ring_write(rdev, 10); /* poll interval */
/* EVENT_WRITE_EOP - flush caches, send int */
radeon_ring_write(rdev, PACKET3(PACKET3_EVENT_WRITE_EOP, 4));
radeon_ring_write(rdev, EVENT_TYPE(CACHE_FLUSH_AND_INV_EVENT_TS) | EVENT_INDEX(5));
radeon_ring_write(rdev, fence->seq);
radeon_ring_write(rdev, 0);
} else {
+ /* flush read cache over gart */
+ radeon_ring_write(rdev, PACKET3(PACKET3_SURFACE_SYNC, 3));
+ radeon_ring_write(rdev, PACKET3_TC_ACTION_ENA |
+ PACKET3_VC_ACTION_ENA |
+ PACKET3_SH_ACTION_ENA);
+ radeon_ring_write(rdev, 0xFFFFFFFF);
+ radeon_ring_write(rdev, 0);
+ radeon_ring_write(rdev, 10); /* poll interval */
radeon_ring_write(rdev, PACKET3(PACKET3_EVENT_WRITE, 0));
radeon_ring_write(rdev, EVENT_TYPE(CACHE_FLUSH_AND_INV_EVENT) | EVENT_INDEX(0));
/* wait for 3D idle clean */
}
}
+ r = r600_vram_scratch_init(rdev);
+ if (r)
+ return r;
+
r600_mc_program(rdev);
if (rdev->flags & RADEON_IS_AGP) {
r600_agp_enable(rdev);
radeon_ib_pool_fini(rdev);
radeon_irq_kms_fini(rdev);
r600_pcie_gart_fini(rdev);
+ r600_vram_scratch_fini(rdev);
radeon_agp_fini(rdev);
radeon_gem_fini(rdev);
radeon_fence_driver_fini(rdev);
static void
set_tex_resource(struct radeon_device *rdev,
int format, int w, int h, int pitch,
- u64 gpu_addr)
+ u64 gpu_addr, u32 size)
{
uint32_t sq_tex_resource_word0, sq_tex_resource_word1, sq_tex_resource_word4;
S_038010_DST_SEL_Z(SQ_SEL_Z) |
S_038010_DST_SEL_W(SQ_SEL_W);
+ cp_set_surface_sync(rdev,
+ PACKET3_TC_ACTION_ENA, size, gpu_addr);
+
radeon_ring_write(rdev, PACKET3(PACKET3_SET_RESOURCE, 7));
radeon_ring_write(rdev, 0);
radeon_ring_write(rdev, sq_tex_resource_word0);
rdev->r600_blit.primitives.set_default_state = set_default_state;
rdev->r600_blit.ring_size_common = 40; /* shaders + def state */
- rdev->r600_blit.ring_size_common += 10; /* fence emit for VB IB */
+ rdev->r600_blit.ring_size_common += 16; /* fence emit for VB IB */
rdev->r600_blit.ring_size_common += 5; /* done copy */
- rdev->r600_blit.ring_size_common += 10; /* fence emit for done copy */
+ rdev->r600_blit.ring_size_common += 16; /* fence emit for done copy */
rdev->r600_blit.ring_size_per_loop = 76;
/* set_render_target emits 2 extra dwords on rv6xx */
vb[11] = i2f(h);
rdev->r600_blit.primitives.set_tex_resource(rdev, FMT_8_8_8_8,
- w, h, w, src_gpu_addr);
- rdev->r600_blit.primitives.cp_set_surface_sync(rdev,
- PACKET3_TC_ACTION_ENA,
- size_in_bytes, src_gpu_addr);
+ w, h, w, src_gpu_addr, size_in_bytes);
rdev->r600_blit.primitives.set_render_target(rdev, COLOR_8_8_8_8,
w, h, dst_gpu_addr);
rdev->r600_blit.primitives.set_scissors(rdev, 0, 0, w, h);
* Alex Deucher <alexander.deucher@amd.com>
*/
+#include <linux/module.h>
+
#include "drmP.h"
#include "drm.h"
#include "radeon_drm.h"
extern int radeon_disp_priority;
extern int radeon_hw_i2c;
extern int radeon_pcie_gen2;
+extern int radeon_msi;
/*
* Copy from radeon_drv.h so we don't have to include both and have conflicting
*/
struct radeon_mc;
-struct radeon_gart_table_ram {
- volatile uint32_t *ptr;
-};
-
-struct radeon_gart_table_vram {
- struct radeon_bo *robj;
- volatile uint32_t *ptr;
-};
-
-union radeon_gart_table {
- struct radeon_gart_table_ram ram;
- struct radeon_gart_table_vram vram;
-};
-
#define RADEON_GPU_PAGE_SIZE 4096
#define RADEON_GPU_PAGE_MASK (RADEON_GPU_PAGE_SIZE - 1)
#define RADEON_GPU_PAGE_SHIFT 12
struct radeon_gart {
dma_addr_t table_addr;
+ struct radeon_bo *robj;
+ void *ptr;
unsigned num_gpu_pages;
unsigned num_cpu_pages;
unsigned table_size;
- union radeon_gart_table table;
struct page **pages;
dma_addr_t *pages_addr;
bool *ttm_alloced;
void radeon_gart_table_ram_free(struct radeon_device *rdev);
int radeon_gart_table_vram_alloc(struct radeon_device *rdev);
void radeon_gart_table_vram_free(struct radeon_device *rdev);
+int radeon_gart_table_vram_pin(struct radeon_device *rdev);
+void radeon_gart_table_vram_unpin(struct radeon_device *rdev);
int radeon_gart_init(struct radeon_device *rdev);
void radeon_gart_fini(struct radeon_device *rdev);
void radeon_gart_unbind(struct radeon_device *rdev, unsigned offset,
int radeon_gart_bind(struct radeon_device *rdev, unsigned offset,
int pages, struct page **pagelist,
dma_addr_t *dma_addr);
+void radeon_gart_restore(struct radeon_device *rdev);
/*
struct evergreen_irq_stat_regs evergreen;
};
+#define RADEON_MAX_HPD_PINS 6
+#define RADEON_MAX_CRTCS 6
+#define RADEON_MAX_HDMI_BLOCKS 2
+
struct radeon_irq {
bool installed;
bool sw_int;
- /* FIXME: use a define max crtc rather than hardcode it */
- bool crtc_vblank_int[6];
- bool pflip[6];
+ bool crtc_vblank_int[RADEON_MAX_CRTCS];
+ bool pflip[RADEON_MAX_CRTCS];
wait_queue_head_t vblank_queue;
- /* FIXME: use defines for max hpd/dacs */
- bool hpd[6];
+ bool hpd[RADEON_MAX_HPD_PINS];
bool gui_idle;
bool gui_idle_acked;
wait_queue_head_t idle_queue;
- /* FIXME: use defines for max HDMI blocks */
- bool hdmi[2];
+ bool hdmi[RADEON_MAX_HDMI_BLOCKS];
spinlock_t sw_lock;
int sw_refcount;
union radeon_irq_stat_regs stat_regs;
- spinlock_t pflip_lock[6];
- int pflip_refcount[6];
+ spinlock_t pflip_lock[RADEON_MAX_CRTCS];
+ int pflip_refcount[RADEON_MAX_CRTCS];
};
int radeon_irq_kms_init(struct radeon_device *rdev);
void (*set_vtx_resource)(struct radeon_device *rdev, u64 gpu_addr);
void (*set_tex_resource)(struct radeon_device *rdev,
int format, int w, int h, int pitch,
- u64 gpu_addr);
+ u64 gpu_addr, u32 size);
void (*set_scissors)(struct radeon_device *rdev, int x1, int y1,
int x2, int y2);
void (*draw_auto)(struct radeon_device *rdev);
struct radeon_power_state {
enum radeon_pm_state_type type;
- /* XXX: use a define for num clock modes */
- struct radeon_pm_clock_info clock_info[8];
+ struct radeon_pm_clock_info *clock_info;
/* number of valid clock modes in this power state */
int num_clock_modes;
struct radeon_pm_clock_info *default_clock_mode;
struct device *int_hwmon_dev;
};
+int radeon_pm_get_type_index(struct radeon_device *rdev,
+ enum radeon_pm_state_type ps_type,
+ int instance);
/*
* Benchmarking
int radeon_gem_get_tiling_ioctl(struct drm_device *dev, void *data,
struct drm_file *filp);
-/* VRAM scratch page for HDP bug */
-struct r700_vram_scratch {
+/* VRAM scratch page for HDP bug, default vram page */
+struct r600_vram_scratch {
struct radeon_bo *robj;
volatile uint32_t *ptr;
+ u64 gpu_addr;
};
+
+/*
+ * Mutex which allows recursive locking from the same process.
+ */
+struct radeon_mutex {
+ struct mutex mutex;
+ struct task_struct *owner;
+ int level;
+};
+
+static inline void radeon_mutex_init(struct radeon_mutex *mutex)
+{
+ mutex_init(&mutex->mutex);
+ mutex->owner = NULL;
+ mutex->level = 0;
+}
+
+static inline void radeon_mutex_lock(struct radeon_mutex *mutex)
+{
+ if (mutex_trylock(&mutex->mutex)) {
+ /* The mutex was unlocked before, so it's ours now */
+ mutex->owner = current;
+ } else if (mutex->owner != current) {
+ /* Another process locked the mutex, take it */
+ mutex_lock(&mutex->mutex);
+ mutex->owner = current;
+ }
+ /* Otherwise the mutex was already locked by this process */
+
+ mutex->level++;
+}
+
+static inline void radeon_mutex_unlock(struct radeon_mutex *mutex)
+{
+ if (--mutex->level > 0)
+ return;
+
+ mutex->owner = NULL;
+ mutex_unlock(&mutex->mutex);
+}
+
+
/*
* Core structure, functions and helpers.
*/
struct radeon_gem gem;
struct radeon_pm pm;
uint32_t bios_scratch[RADEON_BIOS_NUM_SCRATCH];
- struct mutex cs_mutex;
+ struct radeon_mutex cs_mutex;
struct radeon_wb wb;
struct radeon_dummy_page dummy_page;
bool gpu_lockup;
const struct firmware *rlc_fw; /* r6/700 RLC firmware */
const struct firmware *mc_fw; /* NI MC firmware */
struct r600_blit r600_blit;
- struct r700_vram_scratch vram_scratch;
+ struct r600_vram_scratch vram_scratch;
int msi_enabled; /* msi enabled */
struct r600_ih ih; /* r6/700 interrupt ring */
struct work_struct hotplug_work;
/* AGP */
extern int radeon_gpu_reset(struct radeon_device *rdev);
extern void radeon_agp_disable(struct radeon_device *rdev);
-extern int radeon_gart_table_vram_pin(struct radeon_device *rdev);
-extern void radeon_gart_restore(struct radeon_device *rdev);
extern int radeon_modeset_init(struct radeon_device *rdev);
extern void radeon_modeset_fini(struct radeon_device *rdev);
extern bool radeon_card_posted(struct radeon_device *rdev);
extern int radeon_suspend_kms(struct drm_device *dev, pm_message_t state);
extern void radeon_ttm_set_active_vram_size(struct radeon_device *rdev, u64 size);
+/*
+ * R600 vram scratch functions
+ */
+int r600_vram_scratch_init(struct radeon_device *rdev);
+void r600_vram_scratch_fini(struct radeon_device *rdev);
+
/*
* r600 functions used by radeon_encoder.c
*/
.pm_misc = &evergreen_pm_misc,
.pm_prepare = &evergreen_pm_prepare,
.pm_finish = &evergreen_pm_finish,
- .pm_init_profile = &rs780_pm_init_profile,
+ .pm_init_profile = &sumo_pm_init_profile,
.pm_get_dynpm_state = &r600_pm_get_dynpm_state,
.pre_page_flip = &evergreen_pre_page_flip,
.page_flip = &evergreen_page_flip,
extern void evergreen_pm_misc(struct radeon_device *rdev);
extern void evergreen_pm_prepare(struct radeon_device *rdev);
extern void evergreen_pm_finish(struct radeon_device *rdev);
+extern void sumo_pm_init_profile(struct radeon_device *rdev);
extern void evergreen_pre_page_flip(struct radeon_device *rdev, int crtc);
extern u32 evergreen_page_flip(struct radeon_device *rdev, int crtc, u64 crtc_base);
extern void evergreen_post_page_flip(struct radeon_device *rdev, int crtc);
for (i = 0; i < num_indices; i++) {
gpio = &i2c_info->asGPIO_Info[i];
+ /* r4xx mask is technically not used by the hw, so patch in the legacy mask bits */
+ if ((rdev->family == CHIP_R420) ||
+ (rdev->family == CHIP_R423) ||
+ (rdev->family == CHIP_RV410)) {
+ if ((le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0018) ||
+ (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0019) ||
+ (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x001a)) {
+ gpio->ucClkMaskShift = 0x19;
+ gpio->ucDataMaskShift = 0x18;
+ }
+ }
+
/* some evergreen boards have bad data for this entry */
if (ASIC_IS_DCE4(rdev)) {
if ((i == 7) &&
return state_index;
/* last mode is usually default, array is low to high */
for (i = 0; i < num_modes; i++) {
+ rdev->pm.power_state[state_index].clock_info =
+ kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL);
+ if (!rdev->pm.power_state[state_index].clock_info)
+ return state_index;
+ rdev->pm.power_state[state_index].num_clock_modes = 1;
rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE;
switch (frev) {
case 1:
- rdev->pm.power_state[state_index].num_clock_modes = 1;
rdev->pm.power_state[state_index].clock_info[0].mclk =
le16_to_cpu(power_info->info.asPowerPlayInfo[i].usMemoryClock);
rdev->pm.power_state[state_index].clock_info[0].sclk =
state_index++;
break;
case 2:
- rdev->pm.power_state[state_index].num_clock_modes = 1;
rdev->pm.power_state[state_index].clock_info[0].mclk =
le32_to_cpu(power_info->info_2.asPowerPlayInfo[i].ulMemoryClock);
rdev->pm.power_state[state_index].clock_info[0].sclk =
state_index++;
break;
case 3:
- rdev->pm.power_state[state_index].num_clock_modes = 1;
rdev->pm.power_state[state_index].clock_info[0].mclk =
le32_to_cpu(power_info->info_3.asPowerPlayInfo[i].ulMemoryClock);
rdev->pm.power_state[state_index].clock_info[0].sclk =
rdev->pm.default_power_state_index = state_index;
rdev->pm.power_state[state_index].default_clock_mode =
&rdev->pm.power_state[state_index].clock_info[mode_index - 1];
- if (ASIC_IS_DCE5(rdev)) {
+ if (ASIC_IS_DCE5(rdev) && !(rdev->flags & RADEON_IS_IGP)) {
/* NI chips post without MC ucode, so default clocks are strobe mode only */
rdev->pm.default_sclk = rdev->pm.power_state[state_index].clock_info[0].sclk;
rdev->pm.default_mclk = rdev->pm.power_state[state_index].clock_info[0].mclk;
le16_to_cpu(power_info->pplib.usNonClockInfoArrayOffset) +
(power_state->v1.ucNonClockStateIndex *
power_info->pplib.ucNonClockSize));
- for (j = 0; j < (power_info->pplib.ucStateEntrySize - 1); j++) {
- clock_info = (union pplib_clock_info *)
- (mode_info->atom_context->bios + data_offset +
- le16_to_cpu(power_info->pplib.usClockInfoArrayOffset) +
- (power_state->v1.ucClockStateIndices[j] *
- power_info->pplib.ucClockInfoSize));
- valid = radeon_atombios_parse_pplib_clock_info(rdev,
- state_index, mode_index,
- clock_info);
- if (valid)
- mode_index++;
+ rdev->pm.power_state[i].clock_info = kzalloc(sizeof(struct radeon_pm_clock_info) *
+ ((power_info->pplib.ucStateEntrySize - 1) ?
+ (power_info->pplib.ucStateEntrySize - 1) : 1),
+ GFP_KERNEL);
+ if (!rdev->pm.power_state[i].clock_info)
+ return state_index;
+ if (power_info->pplib.ucStateEntrySize - 1) {
+ for (j = 0; j < (power_info->pplib.ucStateEntrySize - 1); j++) {
+ clock_info = (union pplib_clock_info *)
+ (mode_info->atom_context->bios + data_offset +
+ le16_to_cpu(power_info->pplib.usClockInfoArrayOffset) +
+ (power_state->v1.ucClockStateIndices[j] *
+ power_info->pplib.ucClockInfoSize));
+ valid = radeon_atombios_parse_pplib_clock_info(rdev,
+ state_index, mode_index,
+ clock_info);
+ if (valid)
+ mode_index++;
+ }
+ } else {
+ rdev->pm.power_state[state_index].clock_info[0].mclk =
+ rdev->clock.default_mclk;
+ rdev->pm.power_state[state_index].clock_info[0].sclk =
+ rdev->clock.default_sclk;
+ mode_index++;
}
rdev->pm.power_state[state_index].num_clock_modes = mode_index;
if (mode_index) {
non_clock_array_index = i; /* power_state->v2.nonClockInfoIndex */
non_clock_info = (struct _ATOM_PPLIB_NONCLOCK_INFO *)
&non_clock_info_array->nonClockInfo[non_clock_array_index];
- for (j = 0; j < power_state->v2.ucNumDPMLevels; j++) {
- clock_array_index = power_state->v2.clockInfoIndex[j];
- /* XXX this might be an inagua bug... */
- if (clock_array_index >= clock_info_array->ucNumEntries)
- continue;
- clock_info = (union pplib_clock_info *)
- &clock_info_array->clockInfo[clock_array_index];
- valid = radeon_atombios_parse_pplib_clock_info(rdev,
- state_index, mode_index,
- clock_info);
- if (valid)
- mode_index++;
+ rdev->pm.power_state[i].clock_info = kzalloc(sizeof(struct radeon_pm_clock_info) *
+ (power_state->v2.ucNumDPMLevels ?
+ power_state->v2.ucNumDPMLevels : 1),
+ GFP_KERNEL);
+ if (!rdev->pm.power_state[i].clock_info)
+ return state_index;
+ if (power_state->v2.ucNumDPMLevels) {
+ for (j = 0; j < power_state->v2.ucNumDPMLevels; j++) {
+ clock_array_index = power_state->v2.clockInfoIndex[j];
+ /* XXX this might be an inagua bug... */
+ if (clock_array_index >= clock_info_array->ucNumEntries)
+ continue;
+ clock_info = (union pplib_clock_info *)
+ &clock_info_array->clockInfo[clock_array_index];
+ valid = radeon_atombios_parse_pplib_clock_info(rdev,
+ state_index, mode_index,
+ clock_info);
+ if (valid)
+ mode_index++;
+ }
+ } else {
+ rdev->pm.power_state[state_index].clock_info[0].mclk =
+ rdev->clock.default_mclk;
+ rdev->pm.power_state[state_index].clock_info[0].sclk =
+ rdev->clock.default_sclk;
+ mode_index++;
}
rdev->pm.power_state[state_index].num_clock_modes = mode_index;
if (mode_index) {
} else {
rdev->pm.power_state = kzalloc(sizeof(struct radeon_power_state), GFP_KERNEL);
if (rdev->pm.power_state) {
- /* add the default mode */
- rdev->pm.power_state[state_index].type =
- POWER_STATE_TYPE_DEFAULT;
- rdev->pm.power_state[state_index].num_clock_modes = 1;
- rdev->pm.power_state[state_index].clock_info[0].mclk = rdev->clock.default_mclk;
- rdev->pm.power_state[state_index].clock_info[0].sclk = rdev->clock.default_sclk;
- rdev->pm.power_state[state_index].default_clock_mode =
- &rdev->pm.power_state[state_index].clock_info[0];
- rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE;
- rdev->pm.power_state[state_index].pcie_lanes = 16;
- rdev->pm.default_power_state_index = state_index;
- rdev->pm.power_state[state_index].flags = 0;
- state_index++;
+ rdev->pm.power_state[0].clock_info =
+ kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL);
+ if (rdev->pm.power_state[0].clock_info) {
+ /* add the default mode */
+ rdev->pm.power_state[state_index].type =
+ POWER_STATE_TYPE_DEFAULT;
+ rdev->pm.power_state[state_index].num_clock_modes = 1;
+ rdev->pm.power_state[state_index].clock_info[0].mclk = rdev->clock.default_mclk;
+ rdev->pm.power_state[state_index].clock_info[0].sclk = rdev->clock.default_sclk;
+ rdev->pm.power_state[state_index].default_clock_mode =
+ &rdev->pm.power_state[state_index].clock_info[0];
+ rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE;
+ rdev->pm.power_state[state_index].pcie_lanes = 16;
+ rdev->pm.default_power_state_index = state_index;
+ rdev->pm.power_state[state_index].flags = 0;
+ state_index++;
+ }
}
}
struct radeon_bo *sobj = NULL;
uint64_t saddr, daddr;
int r, n;
- unsigned int time;
+ int time;
n = RADEON_BENCHMARK_ITERATIONS;
r = radeon_bo_create(rdev, size, PAGE_SIZE, true, sdomain, &sobj);
/* allocate 2 power states */
rdev->pm.power_state = kzalloc(sizeof(struct radeon_power_state) * 2, GFP_KERNEL);
- if (!rdev->pm.power_state) {
- rdev->pm.default_power_state_index = state_index;
- rdev->pm.num_power_states = 0;
-
- rdev->pm.current_power_state_index = rdev->pm.default_power_state_index;
- rdev->pm.current_clock_mode_index = 0;
- return;
- }
+ if (rdev->pm.power_state) {
+ /* allocate 1 clock mode per state */
+ rdev->pm.power_state[0].clock_info =
+ kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL);
+ rdev->pm.power_state[1].clock_info =
+ kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL);
+ if (!rdev->pm.power_state[0].clock_info ||
+ !rdev->pm.power_state[1].clock_info)
+ goto pm_failed;
+ } else
+ goto pm_failed;
/* check for a thermal chip */
offset = combios_get_table_offset(dev, COMBIOS_OVERDRIVE_INFO_TABLE);
rdev->pm.default_power_state_index = state_index;
rdev->pm.num_power_states = state_index + 1;
+ rdev->pm.current_power_state_index = rdev->pm.default_power_state_index;
+ rdev->pm.current_clock_mode_index = 0;
+ return;
+
+pm_failed:
+ rdev->pm.default_power_state_index = state_index;
+ rdev->pm.num_power_states = 0;
+
rdev->pm.current_power_state_index = rdev->pm.default_power_state_index;
rdev->pm.current_clock_mode_index = 0;
}
radeon_legacy_backlight_init(struct radeon_encoder *radeon_encoder,
struct drm_connector *drm_connector);
-bool radeon_connector_encoder_is_dp_bridge(struct drm_connector *connector);
-
void radeon_connector_hotplug(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
return 0;
}
-/*
- * Some integrated ATI Radeon chipset implementations (e. g.
- * Asus M2A-VM HDMI) may indicate the availability of a DDC,
- * even when there's no monitor connected. For these connectors
- * following DDC probe extension will be applied: check also for the
- * availability of EDID with at least a correct EDID header. Only then,
- * DDC is assumed to be available. This prevents drm_get_edid() and
- * drm_edid_block_valid() from periodically dumping data and kernel
- * errors into the logs and onto the terminal.
- */
-static bool radeon_connector_needs_extended_probe(struct radeon_device *dev,
- uint32_t supported_device,
- int connector_type)
-{
- /* Asus M2A-VM HDMI board sends data to i2c bus even,
- * if HDMI add-on card is not plugged in or HDMI is disabled in
- * BIOS. Valid DDC can only be assumed, if also a valid EDID header
- * can be retrieved via i2c bus during DDC probe */
- if ((dev->pdev->device == 0x791e) &&
- (dev->pdev->subsystem_vendor == 0x1043) &&
- (dev->pdev->subsystem_device == 0x826d)) {
- if ((connector_type == DRM_MODE_CONNECTOR_HDMIA) &&
- (supported_device == ATOM_DEVICE_DFP2_SUPPORT))
- return true;
- }
- /* ECS A740GM-M with ATI RADEON 2100 sends data to i2c bus
- * for a DVI connector that is not implemented */
- if ((dev->pdev->device == 0x796e) &&
- (dev->pdev->subsystem_vendor == 0x1019) &&
- (dev->pdev->subsystem_device == 0x2615)) {
- if ((connector_type == DRM_MODE_CONNECTOR_DVID) &&
- (supported_device == ATOM_DEVICE_DFP2_SUPPORT))
- return true;
- }
- /* TOSHIBA Satellite L300D with ATI Mobility Radeon x1100
- * (RS690M) sends data to i2c bus for a HDMI connector that
- * is not implemented */
- if ((dev->pdev->device == 0x791f) &&
- (dev->pdev->subsystem_vendor == 0x1179) &&
- (dev->pdev->subsystem_device == 0xff68)) {
- if ((connector_type == DRM_MODE_CONNECTOR_HDMIA) &&
- (supported_device == ATOM_DEVICE_DFP2_SUPPORT))
- return true;
- }
-
- /* Default: no EDID header probe required for DDC probing */
- return false;
-}
-
static void radeon_fixup_lvds_native_mode(struct drm_encoder *encoder,
struct drm_connector *connector)
{
ret = connector_status_disconnected;
if (radeon_connector->ddc_bus)
- dret = radeon_ddc_probe(radeon_connector,
- radeon_connector->requires_extended_probe);
+ dret = radeon_ddc_probe(radeon_connector);
if (dret) {
radeon_connector->detected_by_load = false;
if (radeon_connector->edid) {
if (radeon_connector->dac_load_detect && encoder) {
encoder_funcs = encoder->helper_private;
ret = encoder_funcs->detect(encoder, connector);
- if (ret == connector_status_connected)
+ if (ret != connector_status_disconnected)
radeon_connector->detected_by_load = true;
}
}
bool dret = false;
if (radeon_connector->ddc_bus)
- dret = radeon_ddc_probe(radeon_connector,
- radeon_connector->requires_extended_probe);
+ dret = radeon_ddc_probe(radeon_connector);
if (dret) {
radeon_connector->detected_by_load = false;
if (radeon_connector->edid) {
ret = encoder_funcs->detect(encoder, connector);
if (ret == connector_status_connected) {
radeon_connector->use_digital = false;
- radeon_connector->detected_by_load = true;
}
+ if (ret != connector_status_disconnected)
+ radeon_connector->detected_by_load = true;
}
break;
}
}
} else {
/* need to setup ddc on the bridge */
- if (radeon_connector_encoder_is_dp_bridge(connector)) {
+ if (radeon_connector_encoder_get_dp_bridge_encoder_id(connector) !=
+ ENCODER_OBJECT_ID_NONE) {
if (encoder)
radeon_atom_ext_encoder_setup_ddc(encoder);
}
return ret;
}
-bool radeon_connector_encoder_is_dp_bridge(struct drm_connector *connector)
+u16 radeon_connector_encoder_get_dp_bridge_encoder_id(struct drm_connector *connector)
{
struct drm_mode_object *obj;
struct drm_encoder *encoder;
struct radeon_encoder *radeon_encoder;
int i;
- bool found = false;
for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
if (connector->encoder_ids[i] == 0)
switch (radeon_encoder->encoder_id) {
case ENCODER_OBJECT_ID_TRAVIS:
case ENCODER_OBJECT_ID_NUTMEG:
- found = true;
- break;
+ return radeon_encoder->encoder_id;
default:
break;
}
}
- return found;
+ return ENCODER_OBJECT_ID_NONE;
}
bool radeon_connector_encoder_is_hbr2(struct drm_connector *connector)
if (!radeon_dig_connector->edp_on)
atombios_set_edp_panel_power(connector,
ATOM_TRANSMITTER_ACTION_POWER_OFF);
- } else if (radeon_connector_encoder_is_dp_bridge(connector)) {
+ } else if (radeon_connector_encoder_get_dp_bridge_encoder_id(connector) !=
+ ENCODER_OBJECT_ID_NONE) {
/* DP bridges are always DP */
radeon_dig_connector->dp_sink_type = CONNECTOR_OBJECT_ID_DISPLAYPORT;
/* get the DPCD from the bridge */
if (encoder) {
/* setup ddc on the bridge */
radeon_atom_ext_encoder_setup_ddc(encoder);
- if (radeon_ddc_probe(radeon_connector,
- radeon_connector->requires_extended_probe)) /* try DDC */
+ if (radeon_ddc_probe(radeon_connector)) /* try DDC */
ret = connector_status_connected;
else if (radeon_connector->dac_load_detect) { /* try load detection */
struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
if (radeon_dp_getdpcd(radeon_connector))
ret = connector_status_connected;
} else {
- if (radeon_ddc_probe(radeon_connector,
- radeon_connector->requires_extended_probe))
+ if (radeon_ddc_probe(radeon_connector))
ret = connector_status_connected;
}
}
radeon_connector->shared_ddc = shared_ddc;
radeon_connector->connector_object_id = connector_object_id;
radeon_connector->hpd = *hpd;
- radeon_connector->requires_extended_probe =
- radeon_connector_needs_extended_probe(rdev, supported_device,
- connector_type);
+
radeon_connector->router = *router;
if (router->ddc_valid || router->cd_valid) {
radeon_connector->router_bus = radeon_i2c_lookup(rdev, &router->i2c_info);
radeon_connector->devices = supported_device;
radeon_connector->connector_object_id = connector_object_id;
radeon_connector->hpd = *hpd;
- radeon_connector->requires_extended_probe =
- radeon_connector_needs_extended_probe(rdev, supported_device,
- connector_type);
+
switch (connector_type) {
case DRM_MODE_CONNECTOR_VGA:
drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
* Gareth Hughes <gareth@valinux.com>
*/
+#include <linux/module.h>
+
#include "drmP.h"
#include "drm.h"
#include "drm_sarea.h"
struct radeon_cs_chunk *ib_chunk;
int r;
- mutex_lock(&rdev->cs_mutex);
+ radeon_mutex_lock(&rdev->cs_mutex);
/* initialize parser */
memset(&parser, 0, sizeof(struct radeon_cs_parser));
parser.filp = filp;
if (r) {
DRM_ERROR("Failed to initialize parser !\n");
radeon_cs_parser_fini(&parser, r);
- mutex_unlock(&rdev->cs_mutex);
+ radeon_mutex_unlock(&rdev->cs_mutex);
return r;
}
r = radeon_ib_get(rdev, &parser.ib);
if (r) {
DRM_ERROR("Failed to get ib !\n");
radeon_cs_parser_fini(&parser, r);
- mutex_unlock(&rdev->cs_mutex);
+ radeon_mutex_unlock(&rdev->cs_mutex);
return r;
}
r = radeon_cs_parser_relocs(&parser);
if (r != -ERESTARTSYS)
DRM_ERROR("Failed to parse relocation %d!\n", r);
radeon_cs_parser_fini(&parser, r);
- mutex_unlock(&rdev->cs_mutex);
+ radeon_mutex_unlock(&rdev->cs_mutex);
return r;
}
/* Copy the packet into the IB, the parser will read from the
if (r || parser.parser_error) {
DRM_ERROR("Invalid command stream !\n");
radeon_cs_parser_fini(&parser, r);
- mutex_unlock(&rdev->cs_mutex);
+ radeon_mutex_unlock(&rdev->cs_mutex);
return r;
}
r = radeon_cs_finish_pages(&parser);
if (r) {
DRM_ERROR("Invalid command stream !\n");
radeon_cs_parser_fini(&parser, r);
- mutex_unlock(&rdev->cs_mutex);
+ radeon_mutex_unlock(&rdev->cs_mutex);
return r;
}
r = radeon_ib_schedule(rdev, parser.ib);
DRM_ERROR("Failed to schedule IB !\n");
}
radeon_cs_parser_fini(&parser, r);
- mutex_unlock(&rdev->cs_mutex);
+ radeon_mutex_unlock(&rdev->cs_mutex);
return r;
}
/* mutex initialization are all done here so we
* can recall function without having locking issues */
- mutex_init(&rdev->cs_mutex);
+ radeon_mutex_init(&rdev->cs_mutex);
mutex_init(&rdev->ib_pool.mutex);
mutex_init(&rdev->cp.mutex);
mutex_init(&rdev->dc_hw_i2c_mutex);
int r;
int resched;
+ /* Prevent CS ioctl from interfering */
+ radeon_mutex_lock(&rdev->cs_mutex);
+
radeon_save_bios_scratch_regs(rdev);
/* block TTM */
resched = ttm_bo_lock_delayed_workqueue(&rdev->mman.bdev);
radeon_restore_bios_scratch_regs(rdev);
drm_helper_resume_force_mode(rdev->ddev);
ttm_bo_unlock_delayed_workqueue(&rdev->mman.bdev, resched);
- return 0;
}
- /* bad news, how to tell it to userspace ? */
- dev_info(rdev->dev, "GPU reset failed\n");
+
+ radeon_mutex_unlock(&rdev->cs_mutex);
+
+ if (r) {
+ /* bad news, how to tell it to userspace ? */
+ dev_info(rdev->dev, "GPU reset failed\n");
+ }
+
return r;
}
#include "drm_crtc_helper.h"
#include "drm_edid.h"
-static int radeon_ddc_dump(struct drm_connector *connector);
-
static void avivo_crtc_load_lut(struct drm_crtc *crtc)
{
struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
static bool radeon_setup_enc_conn(struct drm_device *dev)
{
struct radeon_device *rdev = dev->dev_private;
- struct drm_connector *drm_connector;
bool ret = false;
if (rdev->bios) {
if (ret) {
radeon_setup_encoder_clones(dev);
radeon_print_display_setup(dev);
- list_for_each_entry(drm_connector, &dev->mode_config.connector_list, head)
- radeon_ddc_dump(drm_connector);
}
return ret;
if ((radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_DisplayPort) ||
(radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_eDP) ||
- radeon_connector_encoder_is_dp_bridge(&radeon_connector->base)) {
+ (radeon_connector_encoder_get_dp_bridge_encoder_id(&radeon_connector->base) !=
+ ENCODER_OBJECT_ID_NONE)) {
struct radeon_connector_atom_dig *dig = radeon_connector->con_priv;
if ((dig->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT ||
return 0;
}
-static int radeon_ddc_dump(struct drm_connector *connector)
-{
- struct edid *edid;
- struct radeon_connector *radeon_connector = to_radeon_connector(connector);
- int ret = 0;
-
- /* on hw with routers, select right port */
- if (radeon_connector->router.ddc_valid)
- radeon_router_select_ddc_port(radeon_connector);
-
- if (!radeon_connector->ddc_bus)
- return -1;
- edid = drm_get_edid(connector, &radeon_connector->ddc_bus->adapter);
- /* Log EDID retrieval status here. In particular with regard to
- * connectors with requires_extended_probe flag set, that will prevent
- * function radeon_dvi_detect() to fetch EDID on this connector,
- * as long as there is no valid EDID header found */
- if (edid) {
- DRM_INFO("Radeon display connector %s: Found valid EDID",
- drm_get_connector_name(connector));
- kfree(edid);
- } else {
- DRM_INFO("Radeon display connector %s: No monitor connected or invalid EDID",
- drm_get_connector_name(connector));
- }
- return ret;
-}
-
/* avivo */
static void avivo_get_fb_div(struct radeon_pll *pll,
u32 target_clock,
#include "drm_pciids.h"
#include <linux/console.h>
+#include <linux/module.h>
/*
int radeon_disp_priority = 0;
int radeon_hw_i2c = 0;
int radeon_pcie_gen2 = 0;
+int radeon_msi = -1;
MODULE_PARM_DESC(no_wb, "Disable AGP writeback for scratch registers");
module_param_named(no_wb, radeon_no_wb, int, 0444);
MODULE_PARM_DESC(pcie_gen2, "PCIE Gen2 mode (1 = enable)");
module_param_named(pcie_gen2, radeon_pcie_gen2, int, 0444);
+MODULE_PARM_DESC(msi, "MSI support (1 = enable, 0 = disable, -1 = auto)");
+module_param_named(msi, radeon_msi, int, 0444);
+
static int radeon_suspend(struct drm_device *dev, pm_message_t state)
{
drm_radeon_private_t *dev_priv = dev->dev_private;
#include "radeon.h"
#include "atom.h"
-extern int atom_debug;
-
-/* evil but including atombios.h is much worse */
-bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index,
- struct drm_display_mode *mode);
-
static uint32_t radeon_encoder_clones(struct drm_encoder *encoder)
{
struct drm_device *dev = encoder->dev;
return ret;
}
-static inline bool radeon_encoder_is_digital(struct drm_encoder *encoder)
-{
- struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- switch (radeon_encoder->encoder_id) {
- case ENCODER_OBJECT_ID_INTERNAL_LVDS:
- case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
- case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
- case ENCODER_OBJECT_ID_INTERNAL_DVO1:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
- case ENCODER_OBJECT_ID_INTERNAL_DDI:
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
- return true;
- default:
- return false;
- }
-}
-
void
radeon_link_encoder_connector(struct drm_device *dev)
{
return NULL;
}
-static struct drm_connector *
-radeon_get_connector_for_encoder_init(struct drm_encoder *encoder)
-{
- struct drm_device *dev = encoder->dev;
- struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- struct drm_connector *connector;
- struct radeon_connector *radeon_connector;
-
- list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- radeon_connector = to_radeon_connector(connector);
- if (radeon_encoder->devices & radeon_connector->devices)
- return connector;
- }
- return NULL;
-}
-
-struct drm_encoder *radeon_atom_get_external_encoder(struct drm_encoder *encoder)
+struct drm_encoder *radeon_get_external_encoder(struct drm_encoder *encoder)
{
struct drm_device *dev = encoder->dev;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
return NULL;
}
-bool radeon_encoder_is_dp_bridge(struct drm_encoder *encoder)
+u16 radeon_encoder_get_dp_bridge_encoder_id(struct drm_encoder *encoder)
{
- struct drm_encoder *other_encoder = radeon_atom_get_external_encoder(encoder);
+ struct drm_encoder *other_encoder = radeon_get_external_encoder(encoder);
if (other_encoder) {
struct radeon_encoder *radeon_encoder = to_radeon_encoder(other_encoder);
}
-static bool radeon_atom_mode_fixup(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- struct drm_device *dev = encoder->dev;
- struct radeon_device *rdev = dev->dev_private;
-
- /* set the active encoder to connector routing */
- radeon_encoder_set_active_device(encoder);
- drm_mode_set_crtcinfo(adjusted_mode, 0);
-
- /* hw bug */
- if ((mode->flags & DRM_MODE_FLAG_INTERLACE)
- && (mode->crtc_vsync_start < (mode->crtc_vdisplay + 2)))
- adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + 2;
-
- /* get the native mode for LVDS */
- if (radeon_encoder->active_device & (ATOM_DEVICE_LCD_SUPPORT))
- radeon_panel_mode_fixup(encoder, adjusted_mode);
-
- /* get the native mode for TV */
- if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT)) {
- struct radeon_encoder_atom_dac *tv_dac = radeon_encoder->enc_priv;
- if (tv_dac) {
- if (tv_dac->tv_std == TV_STD_NTSC ||
- tv_dac->tv_std == TV_STD_NTSC_J ||
- tv_dac->tv_std == TV_STD_PAL_M)
- radeon_atom_get_tv_timings(rdev, 0, adjusted_mode);
- else
- radeon_atom_get_tv_timings(rdev, 1, adjusted_mode);
- }
- }
-
- if (ASIC_IS_DCE3(rdev) &&
- ((radeon_encoder->active_device & (ATOM_DEVICE_DFP_SUPPORT | ATOM_DEVICE_LCD_SUPPORT)) ||
- radeon_encoder_is_dp_bridge(encoder))) {
- struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
- radeon_dp_set_link_config(connector, mode);
- }
-
- return true;
-}
-
-static void
-atombios_dac_setup(struct drm_encoder *encoder, int action)
-{
- struct drm_device *dev = encoder->dev;
- struct radeon_device *rdev = dev->dev_private;
- struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- DAC_ENCODER_CONTROL_PS_ALLOCATION args;
- int index = 0;
- struct radeon_encoder_atom_dac *dac_info = radeon_encoder->enc_priv;
-
- memset(&args, 0, sizeof(args));
-
- switch (radeon_encoder->encoder_id) {
- case ENCODER_OBJECT_ID_INTERNAL_DAC1:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
- index = GetIndexIntoMasterTable(COMMAND, DAC1EncoderControl);
- break;
- case ENCODER_OBJECT_ID_INTERNAL_DAC2:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
- index = GetIndexIntoMasterTable(COMMAND, DAC2EncoderControl);
- break;
- }
-
- args.ucAction = action;
-
- if (radeon_encoder->active_device & (ATOM_DEVICE_CRT_SUPPORT))
- args.ucDacStandard = ATOM_DAC1_PS2;
- else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
- args.ucDacStandard = ATOM_DAC1_CV;
- else {
- switch (dac_info->tv_std) {
- case TV_STD_PAL:
- case TV_STD_PAL_M:
- case TV_STD_SCART_PAL:
- case TV_STD_SECAM:
- case TV_STD_PAL_CN:
- args.ucDacStandard = ATOM_DAC1_PAL;
- break;
- case TV_STD_NTSC:
- case TV_STD_NTSC_J:
- case TV_STD_PAL_60:
- default:
- args.ucDacStandard = ATOM_DAC1_NTSC;
- break;
- }
- }
- args.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
-
- atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-
-}
-
-static void
-atombios_tv_setup(struct drm_encoder *encoder, int action)
-{
- struct drm_device *dev = encoder->dev;
- struct radeon_device *rdev = dev->dev_private;
- struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- TV_ENCODER_CONTROL_PS_ALLOCATION args;
- int index = 0;
- struct radeon_encoder_atom_dac *dac_info = radeon_encoder->enc_priv;
-
- memset(&args, 0, sizeof(args));
-
- index = GetIndexIntoMasterTable(COMMAND, TVEncoderControl);
-
- args.sTVEncoder.ucAction = action;
-
- if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
- args.sTVEncoder.ucTvStandard = ATOM_TV_CV;
- else {
- switch (dac_info->tv_std) {
- case TV_STD_NTSC:
- args.sTVEncoder.ucTvStandard = ATOM_TV_NTSC;
- break;
- case TV_STD_PAL:
- args.sTVEncoder.ucTvStandard = ATOM_TV_PAL;
- break;
- case TV_STD_PAL_M:
- args.sTVEncoder.ucTvStandard = ATOM_TV_PALM;
- break;
- case TV_STD_PAL_60:
- args.sTVEncoder.ucTvStandard = ATOM_TV_PAL60;
- break;
- case TV_STD_NTSC_J:
- args.sTVEncoder.ucTvStandard = ATOM_TV_NTSCJ;
- break;
- case TV_STD_SCART_PAL:
- args.sTVEncoder.ucTvStandard = ATOM_TV_PAL; /* ??? */
- break;
- case TV_STD_SECAM:
- args.sTVEncoder.ucTvStandard = ATOM_TV_SECAM;
- break;
- case TV_STD_PAL_CN:
- args.sTVEncoder.ucTvStandard = ATOM_TV_PALCN;
- break;
- default:
- args.sTVEncoder.ucTvStandard = ATOM_TV_NTSC;
- break;
- }
- }
-
- args.sTVEncoder.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
-
- atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-
-}
-
-union dvo_encoder_control {
- ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION ext_tmds;
- DVO_ENCODER_CONTROL_PS_ALLOCATION dvo;
- DVO_ENCODER_CONTROL_PS_ALLOCATION_V3 dvo_v3;
-};
-
-void
-atombios_dvo_setup(struct drm_encoder *encoder, int action)
-{
- struct drm_device *dev = encoder->dev;
- struct radeon_device *rdev = dev->dev_private;
- struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- union dvo_encoder_control args;
- int index = GetIndexIntoMasterTable(COMMAND, DVOEncoderControl);
-
- memset(&args, 0, sizeof(args));
-
- if (ASIC_IS_DCE3(rdev)) {
- /* DCE3+ */
- args.dvo_v3.ucAction = action;
- args.dvo_v3.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
- args.dvo_v3.ucDVOConfig = 0; /* XXX */
- } else if (ASIC_IS_DCE2(rdev)) {
- /* DCE2 (pre-DCE3 R6xx, RS600/690/740 */
- args.dvo.sDVOEncoder.ucAction = action;
- args.dvo.sDVOEncoder.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
- /* DFP1, CRT1, TV1 depending on the type of port */
- args.dvo.sDVOEncoder.ucDeviceType = ATOM_DEVICE_DFP1_INDEX;
-
- if (radeon_encoder->pixel_clock > 165000)
- args.dvo.sDVOEncoder.usDevAttr.sDigAttrib.ucAttribute |= PANEL_ENCODER_MISC_DUAL;
- } else {
- /* R4xx, R5xx */
- args.ext_tmds.sXTmdsEncoder.ucEnable = action;
-
- if (radeon_encoder->pixel_clock > 165000)
- args.ext_tmds.sXTmdsEncoder.ucMisc |= PANEL_ENCODER_MISC_DUAL;
-
- /*if (pScrn->rgbBits == 8)*/
- args.ext_tmds.sXTmdsEncoder.ucMisc |= ATOM_PANEL_MISC_888RGB;
- }
-
- atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-}
-
-union lvds_encoder_control {
- LVDS_ENCODER_CONTROL_PS_ALLOCATION v1;
- LVDS_ENCODER_CONTROL_PS_ALLOCATION_V2 v2;
-};
-
-void
-atombios_digital_setup(struct drm_encoder *encoder, int action)
-{
- struct drm_device *dev = encoder->dev;
- struct radeon_device *rdev = dev->dev_private;
- struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
- union lvds_encoder_control args;
- int index = 0;
- int hdmi_detected = 0;
- uint8_t frev, crev;
-
- if (!dig)
- return;
-
- if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_HDMI)
- hdmi_detected = 1;
-
- memset(&args, 0, sizeof(args));
-
- switch (radeon_encoder->encoder_id) {
- case ENCODER_OBJECT_ID_INTERNAL_LVDS:
- index = GetIndexIntoMasterTable(COMMAND, LVDSEncoderControl);
- break;
- case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
- index = GetIndexIntoMasterTable(COMMAND, TMDS1EncoderControl);
- break;
- case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
- if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
- index = GetIndexIntoMasterTable(COMMAND, LVDSEncoderControl);
- else
- index = GetIndexIntoMasterTable(COMMAND, TMDS2EncoderControl);
- break;
- }
-
- if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
- return;
-
- switch (frev) {
- case 1:
- case 2:
- switch (crev) {
- case 1:
- args.v1.ucMisc = 0;
- args.v1.ucAction = action;
- if (hdmi_detected)
- args.v1.ucMisc |= PANEL_ENCODER_MISC_HDMI_TYPE;
- args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
- if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
- if (dig->lcd_misc & ATOM_PANEL_MISC_DUAL)
- args.v1.ucMisc |= PANEL_ENCODER_MISC_DUAL;
- if (dig->lcd_misc & ATOM_PANEL_MISC_888RGB)
- args.v1.ucMisc |= ATOM_PANEL_MISC_888RGB;
- } else {
- if (dig->linkb)
- args.v1.ucMisc |= PANEL_ENCODER_MISC_TMDS_LINKB;
- if (radeon_encoder->pixel_clock > 165000)
- args.v1.ucMisc |= PANEL_ENCODER_MISC_DUAL;
- /*if (pScrn->rgbBits == 8) */
- args.v1.ucMisc |= ATOM_PANEL_MISC_888RGB;
- }
- break;
- case 2:
- case 3:
- args.v2.ucMisc = 0;
- args.v2.ucAction = action;
- if (crev == 3) {
- if (dig->coherent_mode)
- args.v2.ucMisc |= PANEL_ENCODER_MISC_COHERENT;
- }
- if (hdmi_detected)
- args.v2.ucMisc |= PANEL_ENCODER_MISC_HDMI_TYPE;
- args.v2.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
- args.v2.ucTruncate = 0;
- args.v2.ucSpatial = 0;
- args.v2.ucTemporal = 0;
- args.v2.ucFRC = 0;
- if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
- if (dig->lcd_misc & ATOM_PANEL_MISC_DUAL)
- args.v2.ucMisc |= PANEL_ENCODER_MISC_DUAL;
- if (dig->lcd_misc & ATOM_PANEL_MISC_SPATIAL) {
- args.v2.ucSpatial = PANEL_ENCODER_SPATIAL_DITHER_EN;
- if (dig->lcd_misc & ATOM_PANEL_MISC_888RGB)
- args.v2.ucSpatial |= PANEL_ENCODER_SPATIAL_DITHER_DEPTH;
- }
- if (dig->lcd_misc & ATOM_PANEL_MISC_TEMPORAL) {
- args.v2.ucTemporal = PANEL_ENCODER_TEMPORAL_DITHER_EN;
- if (dig->lcd_misc & ATOM_PANEL_MISC_888RGB)
- args.v2.ucTemporal |= PANEL_ENCODER_TEMPORAL_DITHER_DEPTH;
- if (((dig->lcd_misc >> ATOM_PANEL_MISC_GREY_LEVEL_SHIFT) & 0x3) == 2)
- args.v2.ucTemporal |= PANEL_ENCODER_TEMPORAL_LEVEL_4;
- }
- } else {
- if (dig->linkb)
- args.v2.ucMisc |= PANEL_ENCODER_MISC_TMDS_LINKB;
- if (radeon_encoder->pixel_clock > 165000)
- args.v2.ucMisc |= PANEL_ENCODER_MISC_DUAL;
- }
- break;
- default:
- DRM_ERROR("Unknown table version %d, %d\n", frev, crev);
- break;
- }
- break;
- default:
- DRM_ERROR("Unknown table version %d, %d\n", frev, crev);
- break;
- }
-
- atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-}
-
-int
-atombios_get_encoder_mode(struct drm_encoder *encoder)
-{
- struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- struct drm_device *dev = encoder->dev;
- struct radeon_device *rdev = dev->dev_private;
- struct drm_connector *connector;
- struct radeon_connector *radeon_connector;
- struct radeon_connector_atom_dig *dig_connector;
-
- /* dp bridges are always DP */
- if (radeon_encoder_is_dp_bridge(encoder))
- return ATOM_ENCODER_MODE_DP;
-
- /* DVO is always DVO */
- if (radeon_encoder->encoder_id == ATOM_ENCODER_MODE_DVO)
- return ATOM_ENCODER_MODE_DVO;
-
- connector = radeon_get_connector_for_encoder(encoder);
- /* if we don't have an active device yet, just use one of
- * the connectors tied to the encoder.
- */
- if (!connector)
- connector = radeon_get_connector_for_encoder_init(encoder);
- radeon_connector = to_radeon_connector(connector);
-
- switch (connector->connector_type) {
- case DRM_MODE_CONNECTOR_DVII:
- case DRM_MODE_CONNECTOR_HDMIB: /* HDMI-B is basically DL-DVI; analog works fine */
- if (drm_detect_monitor_audio(radeon_connector->edid) && radeon_audio) {
- /* fix me */
- if (ASIC_IS_DCE4(rdev))
- return ATOM_ENCODER_MODE_DVI;
- else
- return ATOM_ENCODER_MODE_HDMI;
- } else if (radeon_connector->use_digital)
- return ATOM_ENCODER_MODE_DVI;
- else
- return ATOM_ENCODER_MODE_CRT;
- break;
- case DRM_MODE_CONNECTOR_DVID:
- case DRM_MODE_CONNECTOR_HDMIA:
- default:
- if (drm_detect_monitor_audio(radeon_connector->edid) && radeon_audio) {
- /* fix me */
- if (ASIC_IS_DCE4(rdev))
- return ATOM_ENCODER_MODE_DVI;
- else
- return ATOM_ENCODER_MODE_HDMI;
- } else
- return ATOM_ENCODER_MODE_DVI;
- break;
- case DRM_MODE_CONNECTOR_LVDS:
- return ATOM_ENCODER_MODE_LVDS;
- break;
- case DRM_MODE_CONNECTOR_DisplayPort:
- dig_connector = radeon_connector->con_priv;
- if ((dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT) ||
- (dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_eDP))
- return ATOM_ENCODER_MODE_DP;
- else if (drm_detect_monitor_audio(radeon_connector->edid) && radeon_audio) {
- /* fix me */
- if (ASIC_IS_DCE4(rdev))
- return ATOM_ENCODER_MODE_DVI;
- else
- return ATOM_ENCODER_MODE_HDMI;
- } else
- return ATOM_ENCODER_MODE_DVI;
- break;
- case DRM_MODE_CONNECTOR_eDP:
- return ATOM_ENCODER_MODE_DP;
- case DRM_MODE_CONNECTOR_DVIA:
- case DRM_MODE_CONNECTOR_VGA:
- return ATOM_ENCODER_MODE_CRT;
- break;
- case DRM_MODE_CONNECTOR_Composite:
- case DRM_MODE_CONNECTOR_SVIDEO:
- case DRM_MODE_CONNECTOR_9PinDIN:
- /* fix me */
- return ATOM_ENCODER_MODE_TV;
- /*return ATOM_ENCODER_MODE_CV;*/
- break;
- }
-}
-
-/*
- * DIG Encoder/Transmitter Setup
- *
- * DCE 3.0/3.1
- * - 2 DIG transmitter blocks. UNIPHY (links A and B) and LVTMA.
- * Supports up to 3 digital outputs
- * - 2 DIG encoder blocks.
- * DIG1 can drive UNIPHY link A or link B
- * DIG2 can drive UNIPHY link B or LVTMA
- *
- * DCE 3.2
- * - 3 DIG transmitter blocks. UNIPHY0/1/2 (links A and B).
- * Supports up to 5 digital outputs
- * - 2 DIG encoder blocks.
- * DIG1/2 can drive UNIPHY0/1/2 link A or link B
- *
- * DCE 4.0/5.0
- * - 3 DIG transmitter blocks UNIPHY0/1/2 (links A and B).
- * Supports up to 6 digital outputs
- * - 6 DIG encoder blocks.
- * - DIG to PHY mapping is hardcoded
- * DIG1 drives UNIPHY0 link A, A+B
- * DIG2 drives UNIPHY0 link B
- * DIG3 drives UNIPHY1 link A, A+B
- * DIG4 drives UNIPHY1 link B
- * DIG5 drives UNIPHY2 link A, A+B
- * DIG6 drives UNIPHY2 link B
- *
- * DCE 4.1
- * - 3 DIG transmitter blocks UNIPHY0/1/2 (links A and B).
- * Supports up to 6 digital outputs
- * - 2 DIG encoder blocks.
- * DIG1/2 can drive UNIPHY0/1/2 link A or link B
- *
- * Routing
- * crtc -> dig encoder -> UNIPHY/LVTMA (1 or 2 links)
- * Examples:
- * crtc0 -> dig2 -> LVTMA links A+B -> TMDS/HDMI
- * crtc1 -> dig1 -> UNIPHY0 link B -> DP
- * crtc0 -> dig1 -> UNIPHY2 link A -> LVDS
- * crtc1 -> dig2 -> UNIPHY1 link B+A -> TMDS/HDMI
- */
-
-union dig_encoder_control {
- DIG_ENCODER_CONTROL_PS_ALLOCATION v1;
- DIG_ENCODER_CONTROL_PARAMETERS_V2 v2;
- DIG_ENCODER_CONTROL_PARAMETERS_V3 v3;
- DIG_ENCODER_CONTROL_PARAMETERS_V4 v4;
-};
-
-void
-atombios_dig_encoder_setup(struct drm_encoder *encoder, int action, int panel_mode)
-{
- struct drm_device *dev = encoder->dev;
- struct radeon_device *rdev = dev->dev_private;
- struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
- struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
- union dig_encoder_control args;
- int index = 0;
- uint8_t frev, crev;
- int dp_clock = 0;
- int dp_lane_count = 0;
- int hpd_id = RADEON_HPD_NONE;
- int bpc = 8;
-
- if (connector) {
- struct radeon_connector *radeon_connector = to_radeon_connector(connector);
- struct radeon_connector_atom_dig *dig_connector =
- radeon_connector->con_priv;
-
- dp_clock = dig_connector->dp_clock;
- dp_lane_count = dig_connector->dp_lane_count;
- hpd_id = radeon_connector->hpd.hpd;
- bpc = connector->display_info.bpc;
- }
-
- /* no dig encoder assigned */
- if (dig->dig_encoder == -1)
- return;
-
- memset(&args, 0, sizeof(args));
-
- if (ASIC_IS_DCE4(rdev))
- index = GetIndexIntoMasterTable(COMMAND, DIGxEncoderControl);
- else {
- if (dig->dig_encoder)
- index = GetIndexIntoMasterTable(COMMAND, DIG2EncoderControl);
- else
- index = GetIndexIntoMasterTable(COMMAND, DIG1EncoderControl);
- }
-
- if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
- return;
-
- args.v1.ucAction = action;
- args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
- if (action == ATOM_ENCODER_CMD_SETUP_PANEL_MODE)
- args.v3.ucPanelMode = panel_mode;
- else
- args.v1.ucEncoderMode = atombios_get_encoder_mode(encoder);
-
- if ((args.v1.ucEncoderMode == ATOM_ENCODER_MODE_DP) ||
- (args.v1.ucEncoderMode == ATOM_ENCODER_MODE_DP_MST))
- args.v1.ucLaneNum = dp_lane_count;
- else if (radeon_encoder->pixel_clock > 165000)
- args.v1.ucLaneNum = 8;
- else
- args.v1.ucLaneNum = 4;
-
- if (ASIC_IS_DCE5(rdev)) {
- if ((args.v1.ucEncoderMode == ATOM_ENCODER_MODE_DP) ||
- (args.v1.ucEncoderMode == ATOM_ENCODER_MODE_DP_MST)) {
- if (dp_clock == 270000)
- args.v1.ucConfig |= ATOM_ENCODER_CONFIG_V4_DPLINKRATE_2_70GHZ;
- else if (dp_clock == 540000)
- args.v1.ucConfig |= ATOM_ENCODER_CONFIG_V4_DPLINKRATE_5_40GHZ;
- }
- args.v4.acConfig.ucDigSel = dig->dig_encoder;
- switch (bpc) {
- case 0:
- args.v4.ucBitPerColor = PANEL_BPC_UNDEFINE;
- break;
- case 6:
- args.v4.ucBitPerColor = PANEL_6BIT_PER_COLOR;
- break;
- case 8:
- default:
- args.v4.ucBitPerColor = PANEL_8BIT_PER_COLOR;
- break;
- case 10:
- args.v4.ucBitPerColor = PANEL_10BIT_PER_COLOR;
- break;
- case 12:
- args.v4.ucBitPerColor = PANEL_12BIT_PER_COLOR;
- break;
- case 16:
- args.v4.ucBitPerColor = PANEL_16BIT_PER_COLOR;
- break;
- }
- if (hpd_id == RADEON_HPD_NONE)
- args.v4.ucHPD_ID = 0;
- else
- args.v4.ucHPD_ID = hpd_id + 1;
- } else if (ASIC_IS_DCE4(rdev)) {
- if ((args.v1.ucEncoderMode == ATOM_ENCODER_MODE_DP) && (dp_clock == 270000))
- args.v1.ucConfig |= ATOM_ENCODER_CONFIG_V3_DPLINKRATE_2_70GHZ;
- args.v3.acConfig.ucDigSel = dig->dig_encoder;
- switch (bpc) {
- case 0:
- args.v3.ucBitPerColor = PANEL_BPC_UNDEFINE;
- break;
- case 6:
- args.v3.ucBitPerColor = PANEL_6BIT_PER_COLOR;
- break;
- case 8:
- default:
- args.v3.ucBitPerColor = PANEL_8BIT_PER_COLOR;
- break;
- case 10:
- args.v3.ucBitPerColor = PANEL_10BIT_PER_COLOR;
- break;
- case 12:
- args.v3.ucBitPerColor = PANEL_12BIT_PER_COLOR;
- break;
- case 16:
- args.v3.ucBitPerColor = PANEL_16BIT_PER_COLOR;
- break;
- }
- } else {
- if ((args.v1.ucEncoderMode == ATOM_ENCODER_MODE_DP) && (dp_clock == 270000))
- args.v1.ucConfig |= ATOM_ENCODER_CONFIG_DPLINKRATE_2_70GHZ;
- switch (radeon_encoder->encoder_id) {
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
- args.v1.ucConfig = ATOM_ENCODER_CONFIG_V2_TRANSMITTER1;
- break;
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
- args.v1.ucConfig = ATOM_ENCODER_CONFIG_V2_TRANSMITTER2;
- break;
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
- args.v1.ucConfig = ATOM_ENCODER_CONFIG_V2_TRANSMITTER3;
- break;
- }
- if (dig->linkb)
- args.v1.ucConfig |= ATOM_ENCODER_CONFIG_LINKB;
- else
- args.v1.ucConfig |= ATOM_ENCODER_CONFIG_LINKA;
- }
-
- atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-
-}
-
-union dig_transmitter_control {
- DIG_TRANSMITTER_CONTROL_PS_ALLOCATION v1;
- DIG_TRANSMITTER_CONTROL_PARAMETERS_V2 v2;
- DIG_TRANSMITTER_CONTROL_PARAMETERS_V3 v3;
- DIG_TRANSMITTER_CONTROL_PARAMETERS_V4 v4;
-};
-
-void
-atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action, uint8_t lane_num, uint8_t lane_set)
-{
- struct drm_device *dev = encoder->dev;
- struct radeon_device *rdev = dev->dev_private;
- struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
- struct drm_connector *connector;
- union dig_transmitter_control args;
- int index = 0;
- uint8_t frev, crev;
- bool is_dp = false;
- int pll_id = 0;
- int dp_clock = 0;
- int dp_lane_count = 0;
- int connector_object_id = 0;
- int igp_lane_info = 0;
- int dig_encoder = dig->dig_encoder;
-
- if (action == ATOM_TRANSMITTER_ACTION_INIT) {
- connector = radeon_get_connector_for_encoder_init(encoder);
- /* just needed to avoid bailing in the encoder check. the encoder
- * isn't used for init
- */
- dig_encoder = 0;
- } else
- connector = radeon_get_connector_for_encoder(encoder);
-
- if (connector) {
- struct radeon_connector *radeon_connector = to_radeon_connector(connector);
- struct radeon_connector_atom_dig *dig_connector =
- radeon_connector->con_priv;
-
- dp_clock = dig_connector->dp_clock;
- dp_lane_count = dig_connector->dp_lane_count;
- connector_object_id =
- (radeon_connector->connector_object_id & OBJECT_ID_MASK) >> OBJECT_ID_SHIFT;
- igp_lane_info = dig_connector->igp_lane_info;
- }
-
- /* no dig encoder assigned */
- if (dig_encoder == -1)
- return;
-
- if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_DP)
- is_dp = true;
-
- memset(&args, 0, sizeof(args));
-
- switch (radeon_encoder->encoder_id) {
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
- index = GetIndexIntoMasterTable(COMMAND, DVOOutputControl);
- break;
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
- index = GetIndexIntoMasterTable(COMMAND, UNIPHYTransmitterControl);
- break;
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
- index = GetIndexIntoMasterTable(COMMAND, LVTMATransmitterControl);
- break;
- }
-
- if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
- return;
-
- args.v1.ucAction = action;
- if (action == ATOM_TRANSMITTER_ACTION_INIT) {
- args.v1.usInitInfo = cpu_to_le16(connector_object_id);
- } else if (action == ATOM_TRANSMITTER_ACTION_SETUP_VSEMPH) {
- args.v1.asMode.ucLaneSel = lane_num;
- args.v1.asMode.ucLaneSet = lane_set;
- } else {
- if (is_dp)
- args.v1.usPixelClock =
- cpu_to_le16(dp_clock / 10);
- else if (radeon_encoder->pixel_clock > 165000)
- args.v1.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock / 2) / 10);
- else
- args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
- }
- if (ASIC_IS_DCE4(rdev)) {
- if (is_dp)
- args.v3.ucLaneNum = dp_lane_count;
- else if (radeon_encoder->pixel_clock > 165000)
- args.v3.ucLaneNum = 8;
- else
- args.v3.ucLaneNum = 4;
-
- if (dig->linkb)
- args.v3.acConfig.ucLinkSel = 1;
- if (dig_encoder & 1)
- args.v3.acConfig.ucEncoderSel = 1;
-
- /* Select the PLL for the PHY
- * DP PHY should be clocked from external src if there is
- * one.
- */
- if (encoder->crtc) {
- struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
- pll_id = radeon_crtc->pll_id;
- }
-
- if (ASIC_IS_DCE5(rdev)) {
- /* On DCE5 DCPLL usually generates the DP ref clock */
- if (is_dp) {
- if (rdev->clock.dp_extclk)
- args.v4.acConfig.ucRefClkSource = ENCODER_REFCLK_SRC_EXTCLK;
- else
- args.v4.acConfig.ucRefClkSource = ENCODER_REFCLK_SRC_DCPLL;
- } else
- args.v4.acConfig.ucRefClkSource = pll_id;
- } else {
- /* On DCE4, if there is an external clock, it generates the DP ref clock */
- if (is_dp && rdev->clock.dp_extclk)
- args.v3.acConfig.ucRefClkSource = 2; /* external src */
- else
- args.v3.acConfig.ucRefClkSource = pll_id;
- }
-
- switch (radeon_encoder->encoder_id) {
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
- args.v3.acConfig.ucTransmitterSel = 0;
- break;
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
- args.v3.acConfig.ucTransmitterSel = 1;
- break;
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
- args.v3.acConfig.ucTransmitterSel = 2;
- break;
- }
-
- if (is_dp)
- args.v3.acConfig.fCoherentMode = 1; /* DP requires coherent */
- else if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT)) {
- if (dig->coherent_mode)
- args.v3.acConfig.fCoherentMode = 1;
- if (radeon_encoder->pixel_clock > 165000)
- args.v3.acConfig.fDualLinkConnector = 1;
- }
- } else if (ASIC_IS_DCE32(rdev)) {
- args.v2.acConfig.ucEncoderSel = dig_encoder;
- if (dig->linkb)
- args.v2.acConfig.ucLinkSel = 1;
-
- switch (radeon_encoder->encoder_id) {
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
- args.v2.acConfig.ucTransmitterSel = 0;
- break;
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
- args.v2.acConfig.ucTransmitterSel = 1;
- break;
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
- args.v2.acConfig.ucTransmitterSel = 2;
- break;
- }
-
- if (is_dp) {
- args.v2.acConfig.fCoherentMode = 1;
- args.v2.acConfig.fDPConnector = 1;
- } else if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT)) {
- if (dig->coherent_mode)
- args.v2.acConfig.fCoherentMode = 1;
- if (radeon_encoder->pixel_clock > 165000)
- args.v2.acConfig.fDualLinkConnector = 1;
- }
- } else {
- args.v1.ucConfig = ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL;
-
- if (dig_encoder)
- args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG2_ENCODER;
- else
- args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG1_ENCODER;
-
- if ((rdev->flags & RADEON_IS_IGP) &&
- (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_UNIPHY)) {
- if (is_dp || (radeon_encoder->pixel_clock <= 165000)) {
- if (igp_lane_info & 0x1)
- args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_0_3;
- else if (igp_lane_info & 0x2)
- args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_4_7;
- else if (igp_lane_info & 0x4)
- args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_8_11;
- else if (igp_lane_info & 0x8)
- args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_12_15;
- } else {
- if (igp_lane_info & 0x3)
- args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_0_7;
- else if (igp_lane_info & 0xc)
- args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_8_15;
- }
- }
-
- if (dig->linkb)
- args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LINKB;
- else
- args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LINKA;
-
- if (is_dp)
- args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_COHERENT;
- else if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT)) {
- if (dig->coherent_mode)
- args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_COHERENT;
- if (radeon_encoder->pixel_clock > 165000)
- args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_8LANE_LINK;
- }
- }
-
- atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-}
-
-bool
-atombios_set_edp_panel_power(struct drm_connector *connector, int action)
-{
- struct radeon_connector *radeon_connector = to_radeon_connector(connector);
- struct drm_device *dev = radeon_connector->base.dev;
- struct radeon_device *rdev = dev->dev_private;
- union dig_transmitter_control args;
- int index = GetIndexIntoMasterTable(COMMAND, UNIPHYTransmitterControl);
- uint8_t frev, crev;
-
- if (connector->connector_type != DRM_MODE_CONNECTOR_eDP)
- goto done;
-
- if (!ASIC_IS_DCE4(rdev))
- goto done;
-
- if ((action != ATOM_TRANSMITTER_ACTION_POWER_ON) &&
- (action != ATOM_TRANSMITTER_ACTION_POWER_OFF))
- goto done;
-
- if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
- goto done;
-
- memset(&args, 0, sizeof(args));
-
- args.v1.ucAction = action;
-
- atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-
- /* wait for the panel to power up */
- if (action == ATOM_TRANSMITTER_ACTION_POWER_ON) {
- int i;
-
- for (i = 0; i < 300; i++) {
- if (radeon_hpd_sense(rdev, radeon_connector->hpd.hpd))
- return true;
- mdelay(1);
- }
- return false;
- }
-done:
- return true;
-}
-
-union external_encoder_control {
- EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION v1;
- EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION_V3 v3;
-};
-
-static void
-atombios_external_encoder_setup(struct drm_encoder *encoder,
- struct drm_encoder *ext_encoder,
- int action)
-{
- struct drm_device *dev = encoder->dev;
- struct radeon_device *rdev = dev->dev_private;
- struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- struct radeon_encoder *ext_radeon_encoder = to_radeon_encoder(ext_encoder);
- union external_encoder_control args;
- struct drm_connector *connector;
- int index = GetIndexIntoMasterTable(COMMAND, ExternalEncoderControl);
- u8 frev, crev;
- int dp_clock = 0;
- int dp_lane_count = 0;
- int connector_object_id = 0;
- u32 ext_enum = (ext_radeon_encoder->encoder_enum & ENUM_ID_MASK) >> ENUM_ID_SHIFT;
- int bpc = 8;
-
- if (action == EXTERNAL_ENCODER_ACTION_V3_ENCODER_INIT)
- connector = radeon_get_connector_for_encoder_init(encoder);
- else
- connector = radeon_get_connector_for_encoder(encoder);
-
- if (connector) {
- struct radeon_connector *radeon_connector = to_radeon_connector(connector);
- struct radeon_connector_atom_dig *dig_connector =
- radeon_connector->con_priv;
-
- dp_clock = dig_connector->dp_clock;
- dp_lane_count = dig_connector->dp_lane_count;
- connector_object_id =
- (radeon_connector->connector_object_id & OBJECT_ID_MASK) >> OBJECT_ID_SHIFT;
- bpc = connector->display_info.bpc;
- }
-
- memset(&args, 0, sizeof(args));
-
- if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
- return;
-
- switch (frev) {
- case 1:
- /* no params on frev 1 */
- break;
- case 2:
- switch (crev) {
- case 1:
- case 2:
- args.v1.sDigEncoder.ucAction = action;
- args.v1.sDigEncoder.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
- args.v1.sDigEncoder.ucEncoderMode = atombios_get_encoder_mode(encoder);
-
- if (args.v1.sDigEncoder.ucEncoderMode == ATOM_ENCODER_MODE_DP) {
- if (dp_clock == 270000)
- args.v1.sDigEncoder.ucConfig |= ATOM_ENCODER_CONFIG_DPLINKRATE_2_70GHZ;
- args.v1.sDigEncoder.ucLaneNum = dp_lane_count;
- } else if (radeon_encoder->pixel_clock > 165000)
- args.v1.sDigEncoder.ucLaneNum = 8;
- else
- args.v1.sDigEncoder.ucLaneNum = 4;
- break;
- case 3:
- args.v3.sExtEncoder.ucAction = action;
- if (action == EXTERNAL_ENCODER_ACTION_V3_ENCODER_INIT)
- args.v3.sExtEncoder.usConnectorId = cpu_to_le16(connector_object_id);
- else
- args.v3.sExtEncoder.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
- args.v3.sExtEncoder.ucEncoderMode = atombios_get_encoder_mode(encoder);
-
- if (args.v3.sExtEncoder.ucEncoderMode == ATOM_ENCODER_MODE_DP) {
- if (dp_clock == 270000)
- args.v3.sExtEncoder.ucConfig |= EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_2_70GHZ;
- else if (dp_clock == 540000)
- args.v3.sExtEncoder.ucConfig |= EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_5_40GHZ;
- args.v3.sExtEncoder.ucLaneNum = dp_lane_count;
- } else if (radeon_encoder->pixel_clock > 165000)
- args.v3.sExtEncoder.ucLaneNum = 8;
- else
- args.v3.sExtEncoder.ucLaneNum = 4;
- switch (ext_enum) {
- case GRAPH_OBJECT_ENUM_ID1:
- args.v3.sExtEncoder.ucConfig |= EXTERNAL_ENCODER_CONFIG_V3_ENCODER1;
- break;
- case GRAPH_OBJECT_ENUM_ID2:
- args.v3.sExtEncoder.ucConfig |= EXTERNAL_ENCODER_CONFIG_V3_ENCODER2;
- break;
- case GRAPH_OBJECT_ENUM_ID3:
- args.v3.sExtEncoder.ucConfig |= EXTERNAL_ENCODER_CONFIG_V3_ENCODER3;
- break;
- }
- switch (bpc) {
- case 0:
- args.v3.sExtEncoder.ucBitPerColor = PANEL_BPC_UNDEFINE;
- break;
- case 6:
- args.v3.sExtEncoder.ucBitPerColor = PANEL_6BIT_PER_COLOR;
- break;
- case 8:
- default:
- args.v3.sExtEncoder.ucBitPerColor = PANEL_8BIT_PER_COLOR;
- break;
- case 10:
- args.v3.sExtEncoder.ucBitPerColor = PANEL_10BIT_PER_COLOR;
- break;
- case 12:
- args.v3.sExtEncoder.ucBitPerColor = PANEL_12BIT_PER_COLOR;
- break;
- case 16:
- args.v3.sExtEncoder.ucBitPerColor = PANEL_16BIT_PER_COLOR;
- break;
- }
- break;
- default:
- DRM_ERROR("Unknown table version: %d, %d\n", frev, crev);
- return;
- }
- break;
- default:
- DRM_ERROR("Unknown table version: %d, %d\n", frev, crev);
- return;
- }
- atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-}
-
-static void
-atombios_yuv_setup(struct drm_encoder *encoder, bool enable)
-{
- struct drm_device *dev = encoder->dev;
- struct radeon_device *rdev = dev->dev_private;
- struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
- ENABLE_YUV_PS_ALLOCATION args;
- int index = GetIndexIntoMasterTable(COMMAND, EnableYUV);
- uint32_t temp, reg;
-
- memset(&args, 0, sizeof(args));
-
- if (rdev->family >= CHIP_R600)
- reg = R600_BIOS_3_SCRATCH;
- else
- reg = RADEON_BIOS_3_SCRATCH;
-
- /* XXX: fix up scratch reg handling */
- temp = RREG32(reg);
- if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
- WREG32(reg, (ATOM_S3_TV1_ACTIVE |
- (radeon_crtc->crtc_id << 18)));
- else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
- WREG32(reg, (ATOM_S3_CV_ACTIVE | (radeon_crtc->crtc_id << 24)));
- else
- WREG32(reg, 0);
-
- if (enable)
- args.ucEnable = ATOM_ENABLE;
- args.ucCRTC = radeon_crtc->crtc_id;
-
- atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-
- WREG32(reg, temp);
-}
-
-static void
-radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode)
-{
- struct drm_device *dev = encoder->dev;
- struct radeon_device *rdev = dev->dev_private;
- struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- struct drm_encoder *ext_encoder = radeon_atom_get_external_encoder(encoder);
- DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION args;
- int index = 0;
- bool is_dig = false;
- bool is_dce5_dac = false;
- bool is_dce5_dvo = false;
-
- memset(&args, 0, sizeof(args));
-
- DRM_DEBUG_KMS("encoder dpms %d to mode %d, devices %08x, active_devices %08x\n",
- radeon_encoder->encoder_id, mode, radeon_encoder->devices,
- radeon_encoder->active_device);
- switch (radeon_encoder->encoder_id) {
- case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
- index = GetIndexIntoMasterTable(COMMAND, TMDSAOutputControl);
- break;
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
- is_dig = true;
- break;
- case ENCODER_OBJECT_ID_INTERNAL_DVO1:
- case ENCODER_OBJECT_ID_INTERNAL_DDI:
- index = GetIndexIntoMasterTable(COMMAND, DVOOutputControl);
- break;
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
- if (ASIC_IS_DCE5(rdev))
- is_dce5_dvo = true;
- else if (ASIC_IS_DCE3(rdev))
- is_dig = true;
- else
- index = GetIndexIntoMasterTable(COMMAND, DVOOutputControl);
- break;
- case ENCODER_OBJECT_ID_INTERNAL_LVDS:
- index = GetIndexIntoMasterTable(COMMAND, LCD1OutputControl);
- break;
- case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
- if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
- index = GetIndexIntoMasterTable(COMMAND, LCD1OutputControl);
- else
- index = GetIndexIntoMasterTable(COMMAND, LVTMAOutputControl);
- break;
- case ENCODER_OBJECT_ID_INTERNAL_DAC1:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
- if (ASIC_IS_DCE5(rdev))
- is_dce5_dac = true;
- else {
- if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
- index = GetIndexIntoMasterTable(COMMAND, TV1OutputControl);
- else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
- index = GetIndexIntoMasterTable(COMMAND, CV1OutputControl);
- else
- index = GetIndexIntoMasterTable(COMMAND, DAC1OutputControl);
- }
- break;
- case ENCODER_OBJECT_ID_INTERNAL_DAC2:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
- if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
- index = GetIndexIntoMasterTable(COMMAND, TV1OutputControl);
- else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
- index = GetIndexIntoMasterTable(COMMAND, CV1OutputControl);
- else
- index = GetIndexIntoMasterTable(COMMAND, DAC2OutputControl);
- break;
- }
-
- if (is_dig) {
- switch (mode) {
- case DRM_MODE_DPMS_ON:
- /* some early dce3.2 boards have a bug in their transmitter control table */
- if ((rdev->family == CHIP_RV710) || (rdev->family == CHIP_RV730))
- atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0);
- else
- atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0);
- if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_DP) {
- struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
-
- if (connector &&
- (connector->connector_type == DRM_MODE_CONNECTOR_eDP)) {
- struct radeon_connector *radeon_connector = to_radeon_connector(connector);
- struct radeon_connector_atom_dig *radeon_dig_connector =
- radeon_connector->con_priv;
- atombios_set_edp_panel_power(connector,
- ATOM_TRANSMITTER_ACTION_POWER_ON);
- radeon_dig_connector->edp_on = true;
- }
- if (ASIC_IS_DCE4(rdev))
- atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_VIDEO_OFF, 0);
- radeon_dp_link_train(encoder, connector);
- if (ASIC_IS_DCE4(rdev))
- atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_VIDEO_ON, 0);
- }
- if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
- atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_LCD_BLON, 0, 0);
- break;
- case DRM_MODE_DPMS_STANDBY:
- case DRM_MODE_DPMS_SUSPEND:
- case DRM_MODE_DPMS_OFF:
- atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT, 0, 0);
- if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_DP) {
- struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
-
- if (ASIC_IS_DCE4(rdev))
- atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_VIDEO_OFF, 0);
- if (connector &&
- (connector->connector_type == DRM_MODE_CONNECTOR_eDP)) {
- struct radeon_connector *radeon_connector = to_radeon_connector(connector);
- struct radeon_connector_atom_dig *radeon_dig_connector =
- radeon_connector->con_priv;
- atombios_set_edp_panel_power(connector,
- ATOM_TRANSMITTER_ACTION_POWER_OFF);
- radeon_dig_connector->edp_on = false;
- }
- }
- if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
- atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_LCD_BLOFF, 0, 0);
- break;
- }
- } else if (is_dce5_dac) {
- switch (mode) {
- case DRM_MODE_DPMS_ON:
- atombios_dac_setup(encoder, ATOM_ENABLE);
- break;
- case DRM_MODE_DPMS_STANDBY:
- case DRM_MODE_DPMS_SUSPEND:
- case DRM_MODE_DPMS_OFF:
- atombios_dac_setup(encoder, ATOM_DISABLE);
- break;
- }
- } else if (is_dce5_dvo) {
- switch (mode) {
- case DRM_MODE_DPMS_ON:
- atombios_dvo_setup(encoder, ATOM_ENABLE);
- break;
- case DRM_MODE_DPMS_STANDBY:
- case DRM_MODE_DPMS_SUSPEND:
- case DRM_MODE_DPMS_OFF:
- atombios_dvo_setup(encoder, ATOM_DISABLE);
- break;
- }
- } else {
- switch (mode) {
- case DRM_MODE_DPMS_ON:
- args.ucAction = ATOM_ENABLE;
- /* workaround for DVOOutputControl on some RS690 systems */
- if (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_DDI) {
- u32 reg = RREG32(RADEON_BIOS_3_SCRATCH);
- WREG32(RADEON_BIOS_3_SCRATCH, reg & ~ATOM_S3_DFP2I_ACTIVE);
- atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
- WREG32(RADEON_BIOS_3_SCRATCH, reg);
- } else
- atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
- if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
- args.ucAction = ATOM_LCD_BLON;
- atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
- }
- break;
- case DRM_MODE_DPMS_STANDBY:
- case DRM_MODE_DPMS_SUSPEND:
- case DRM_MODE_DPMS_OFF:
- args.ucAction = ATOM_DISABLE;
- atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
- if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
- args.ucAction = ATOM_LCD_BLOFF;
- atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
- }
- break;
- }
- }
-
- if (ext_encoder) {
- switch (mode) {
- case DRM_MODE_DPMS_ON:
- default:
- if (ASIC_IS_DCE41(rdev)) {
- atombios_external_encoder_setup(encoder, ext_encoder,
- EXTERNAL_ENCODER_ACTION_V3_ENABLE_OUTPUT);
- atombios_external_encoder_setup(encoder, ext_encoder,
- EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING_OFF);
- } else
- atombios_external_encoder_setup(encoder, ext_encoder, ATOM_ENABLE);
- break;
- case DRM_MODE_DPMS_STANDBY:
- case DRM_MODE_DPMS_SUSPEND:
- case DRM_MODE_DPMS_OFF:
- if (ASIC_IS_DCE41(rdev)) {
- atombios_external_encoder_setup(encoder, ext_encoder,
- EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING);
- atombios_external_encoder_setup(encoder, ext_encoder,
- EXTERNAL_ENCODER_ACTION_V3_DISABLE_OUTPUT);
- } else
- atombios_external_encoder_setup(encoder, ext_encoder, ATOM_DISABLE);
- break;
- }
- }
-
- radeon_atombios_encoder_dpms_scratch_regs(encoder, (mode == DRM_MODE_DPMS_ON) ? true : false);
-
-}
-
-union crtc_source_param {
- SELECT_CRTC_SOURCE_PS_ALLOCATION v1;
- SELECT_CRTC_SOURCE_PARAMETERS_V2 v2;
-};
-
-static void
-atombios_set_encoder_crtc_source(struct drm_encoder *encoder)
-{
- struct drm_device *dev = encoder->dev;
- struct radeon_device *rdev = dev->dev_private;
- struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
- union crtc_source_param args;
- int index = GetIndexIntoMasterTable(COMMAND, SelectCRTC_Source);
- uint8_t frev, crev;
- struct radeon_encoder_atom_dig *dig;
-
- memset(&args, 0, sizeof(args));
-
- if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
- return;
-
- switch (frev) {
- case 1:
- switch (crev) {
- case 1:
- default:
- if (ASIC_IS_AVIVO(rdev))
- args.v1.ucCRTC = radeon_crtc->crtc_id;
- else {
- if (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_DAC1) {
- args.v1.ucCRTC = radeon_crtc->crtc_id;
- } else {
- args.v1.ucCRTC = radeon_crtc->crtc_id << 2;
- }
- }
- switch (radeon_encoder->encoder_id) {
- case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
- args.v1.ucDevice = ATOM_DEVICE_DFP1_INDEX;
- break;
- case ENCODER_OBJECT_ID_INTERNAL_LVDS:
- case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
- if (radeon_encoder->devices & ATOM_DEVICE_LCD1_SUPPORT)
- args.v1.ucDevice = ATOM_DEVICE_LCD1_INDEX;
- else
- args.v1.ucDevice = ATOM_DEVICE_DFP3_INDEX;
- break;
- case ENCODER_OBJECT_ID_INTERNAL_DVO1:
- case ENCODER_OBJECT_ID_INTERNAL_DDI:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
- args.v1.ucDevice = ATOM_DEVICE_DFP2_INDEX;
- break;
- case ENCODER_OBJECT_ID_INTERNAL_DAC1:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
- if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
- args.v1.ucDevice = ATOM_DEVICE_TV1_INDEX;
- else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
- args.v1.ucDevice = ATOM_DEVICE_CV_INDEX;
- else
- args.v1.ucDevice = ATOM_DEVICE_CRT1_INDEX;
- break;
- case ENCODER_OBJECT_ID_INTERNAL_DAC2:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
- if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
- args.v1.ucDevice = ATOM_DEVICE_TV1_INDEX;
- else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
- args.v1.ucDevice = ATOM_DEVICE_CV_INDEX;
- else
- args.v1.ucDevice = ATOM_DEVICE_CRT2_INDEX;
- break;
- }
- break;
- case 2:
- args.v2.ucCRTC = radeon_crtc->crtc_id;
- if (radeon_encoder_is_dp_bridge(encoder)) {
- struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
-
- if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS)
- args.v2.ucEncodeMode = ATOM_ENCODER_MODE_LVDS;
- else if (connector->connector_type == DRM_MODE_CONNECTOR_VGA)
- args.v2.ucEncodeMode = ATOM_ENCODER_MODE_CRT;
- else
- args.v2.ucEncodeMode = atombios_get_encoder_mode(encoder);
- } else
- args.v2.ucEncodeMode = atombios_get_encoder_mode(encoder);
- switch (radeon_encoder->encoder_id) {
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
- dig = radeon_encoder->enc_priv;
- switch (dig->dig_encoder) {
- case 0:
- args.v2.ucEncoderID = ASIC_INT_DIG1_ENCODER_ID;
- break;
- case 1:
- args.v2.ucEncoderID = ASIC_INT_DIG2_ENCODER_ID;
- break;
- case 2:
- args.v2.ucEncoderID = ASIC_INT_DIG3_ENCODER_ID;
- break;
- case 3:
- args.v2.ucEncoderID = ASIC_INT_DIG4_ENCODER_ID;
- break;
- case 4:
- args.v2.ucEncoderID = ASIC_INT_DIG5_ENCODER_ID;
- break;
- case 5:
- args.v2.ucEncoderID = ASIC_INT_DIG6_ENCODER_ID;
- break;
- }
- break;
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
- args.v2.ucEncoderID = ASIC_INT_DVO_ENCODER_ID;
- break;
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
- if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
- args.v2.ucEncoderID = ASIC_INT_TV_ENCODER_ID;
- else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
- args.v2.ucEncoderID = ASIC_INT_TV_ENCODER_ID;
- else
- args.v2.ucEncoderID = ASIC_INT_DAC1_ENCODER_ID;
- break;
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
- if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
- args.v2.ucEncoderID = ASIC_INT_TV_ENCODER_ID;
- else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
- args.v2.ucEncoderID = ASIC_INT_TV_ENCODER_ID;
- else
- args.v2.ucEncoderID = ASIC_INT_DAC2_ENCODER_ID;
- break;
- }
- break;
- }
- break;
- default:
- DRM_ERROR("Unknown table version: %d, %d\n", frev, crev);
- return;
- }
-
- atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-
- /* update scratch regs with new routing */
- radeon_atombios_encoder_crtc_scratch_regs(encoder, radeon_crtc->crtc_id);
-}
-
-static void
-atombios_apply_encoder_quirks(struct drm_encoder *encoder,
- struct drm_display_mode *mode)
-{
- struct drm_device *dev = encoder->dev;
- struct radeon_device *rdev = dev->dev_private;
- struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
-
- /* Funky macbooks */
- if ((dev->pdev->device == 0x71C5) &&
- (dev->pdev->subsystem_vendor == 0x106b) &&
- (dev->pdev->subsystem_device == 0x0080)) {
- if (radeon_encoder->devices & ATOM_DEVICE_LCD1_SUPPORT) {
- uint32_t lvtma_bit_depth_control = RREG32(AVIVO_LVTMA_BIT_DEPTH_CONTROL);
-
- lvtma_bit_depth_control &= ~AVIVO_LVTMA_BIT_DEPTH_CONTROL_TRUNCATE_EN;
- lvtma_bit_depth_control &= ~AVIVO_LVTMA_BIT_DEPTH_CONTROL_SPATIAL_DITHER_EN;
-
- WREG32(AVIVO_LVTMA_BIT_DEPTH_CONTROL, lvtma_bit_depth_control);
- }
- }
-
- /* set scaler clears this on some chips */
- if (ASIC_IS_AVIVO(rdev) &&
- (!(radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT)))) {
- if (ASIC_IS_DCE4(rdev)) {
- if (mode->flags & DRM_MODE_FLAG_INTERLACE)
- WREG32(EVERGREEN_DATA_FORMAT + radeon_crtc->crtc_offset,
- EVERGREEN_INTERLEAVE_EN);
- else
- WREG32(EVERGREEN_DATA_FORMAT + radeon_crtc->crtc_offset, 0);
- } else {
- if (mode->flags & DRM_MODE_FLAG_INTERLACE)
- WREG32(AVIVO_D1MODE_DATA_FORMAT + radeon_crtc->crtc_offset,
- AVIVO_D1MODE_INTERLEAVE_EN);
- else
- WREG32(AVIVO_D1MODE_DATA_FORMAT + radeon_crtc->crtc_offset, 0);
- }
- }
-}
-
-static int radeon_atom_pick_dig_encoder(struct drm_encoder *encoder)
-{
- struct drm_device *dev = encoder->dev;
- struct radeon_device *rdev = dev->dev_private;
- struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
- struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- struct drm_encoder *test_encoder;
- struct radeon_encoder_atom_dig *dig;
- uint32_t dig_enc_in_use = 0;
-
- /* DCE4/5 */
- if (ASIC_IS_DCE4(rdev)) {
- dig = radeon_encoder->enc_priv;
- if (ASIC_IS_DCE41(rdev)) {
- /* ontario follows DCE4 */
- if (rdev->family == CHIP_PALM) {
- if (dig->linkb)
- return 1;
- else
- return 0;
- } else
- /* llano follows DCE3.2 */
- return radeon_crtc->crtc_id;
- } else {
- switch (radeon_encoder->encoder_id) {
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
- if (dig->linkb)
- return 1;
- else
- return 0;
- break;
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
- if (dig->linkb)
- return 3;
- else
- return 2;
- break;
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
- if (dig->linkb)
- return 5;
- else
- return 4;
- break;
- }
- }
- }
-
- /* on DCE32 and encoder can driver any block so just crtc id */
- if (ASIC_IS_DCE32(rdev)) {
- return radeon_crtc->crtc_id;
- }
-
- /* on DCE3 - LVTMA can only be driven by DIGB */
- list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) {
- struct radeon_encoder *radeon_test_encoder;
-
- if (encoder == test_encoder)
- continue;
-
- if (!radeon_encoder_is_digital(test_encoder))
- continue;
-
- radeon_test_encoder = to_radeon_encoder(test_encoder);
- dig = radeon_test_encoder->enc_priv;
-
- if (dig->dig_encoder >= 0)
- dig_enc_in_use |= (1 << dig->dig_encoder);
- }
-
- if (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA) {
- if (dig_enc_in_use & 0x2)
- DRM_ERROR("LVDS required digital encoder 2 but it was in use - stealing\n");
- return 1;
- }
- if (!(dig_enc_in_use & 1))
- return 0;
- return 1;
-}
-
-/* This only needs to be called once at startup */
-void
-radeon_atom_encoder_init(struct radeon_device *rdev)
-{
- struct drm_device *dev = rdev->ddev;
- struct drm_encoder *encoder;
-
- list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
- struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- struct drm_encoder *ext_encoder = radeon_atom_get_external_encoder(encoder);
-
- switch (radeon_encoder->encoder_id) {
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
- atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_INIT, 0, 0);
- break;
- default:
- break;
- }
-
- if (ext_encoder && ASIC_IS_DCE41(rdev))
- atombios_external_encoder_setup(encoder, ext_encoder,
- EXTERNAL_ENCODER_ACTION_V3_ENCODER_INIT);
- }
-}
-
-static void
-radeon_atom_encoder_mode_set(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- struct drm_device *dev = encoder->dev;
- struct radeon_device *rdev = dev->dev_private;
- struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- struct drm_encoder *ext_encoder = radeon_atom_get_external_encoder(encoder);
-
- radeon_encoder->pixel_clock = adjusted_mode->clock;
-
- if (ASIC_IS_AVIVO(rdev) && !ASIC_IS_DCE4(rdev)) {
- if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT | ATOM_DEVICE_TV_SUPPORT))
- atombios_yuv_setup(encoder, true);
- else
- atombios_yuv_setup(encoder, false);
- }
-
- switch (radeon_encoder->encoder_id) {
- case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
- case ENCODER_OBJECT_ID_INTERNAL_LVDS:
- case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
- atombios_digital_setup(encoder, PANEL_ENCODER_ACTION_ENABLE);
- break;
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
- if (ASIC_IS_DCE4(rdev)) {
- /* disable the transmitter */
- atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0);
- /* setup and enable the encoder */
- atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_SETUP, 0);
-
- /* enable the transmitter */
- atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0);
- } else {
- /* disable the encoder and transmitter */
- atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0);
- atombios_dig_encoder_setup(encoder, ATOM_DISABLE, 0);
-
- /* setup and enable the encoder and transmitter */
- atombios_dig_encoder_setup(encoder, ATOM_ENABLE, 0);
- atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_SETUP, 0, 0);
- atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0);
- }
- break;
- case ENCODER_OBJECT_ID_INTERNAL_DDI:
- case ENCODER_OBJECT_ID_INTERNAL_DVO1:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
- atombios_dvo_setup(encoder, ATOM_ENABLE);
- break;
- case ENCODER_OBJECT_ID_INTERNAL_DAC1:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
- case ENCODER_OBJECT_ID_INTERNAL_DAC2:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
- atombios_dac_setup(encoder, ATOM_ENABLE);
- if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT | ATOM_DEVICE_CV_SUPPORT)) {
- if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT | ATOM_DEVICE_CV_SUPPORT))
- atombios_tv_setup(encoder, ATOM_ENABLE);
- else
- atombios_tv_setup(encoder, ATOM_DISABLE);
- }
- break;
- }
-
- if (ext_encoder) {
- if (ASIC_IS_DCE41(rdev))
- atombios_external_encoder_setup(encoder, ext_encoder,
- EXTERNAL_ENCODER_ACTION_V3_ENCODER_SETUP);
- else
- atombios_external_encoder_setup(encoder, ext_encoder, ATOM_ENABLE);
- }
-
- atombios_apply_encoder_quirks(encoder, adjusted_mode);
-
- if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_HDMI) {
- r600_hdmi_enable(encoder);
- r600_hdmi_setmode(encoder, adjusted_mode);
- }
-}
-
-static bool
-atombios_dac_load_detect(struct drm_encoder *encoder, struct drm_connector *connector)
-{
- struct drm_device *dev = encoder->dev;
- struct radeon_device *rdev = dev->dev_private;
- struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- struct radeon_connector *radeon_connector = to_radeon_connector(connector);
-
- if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT |
- ATOM_DEVICE_CV_SUPPORT |
- ATOM_DEVICE_CRT_SUPPORT)) {
- DAC_LOAD_DETECTION_PS_ALLOCATION args;
- int index = GetIndexIntoMasterTable(COMMAND, DAC_LoadDetection);
- uint8_t frev, crev;
-
- memset(&args, 0, sizeof(args));
-
- if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
- return false;
-
- args.sDacload.ucMisc = 0;
-
- if ((radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_DAC1) ||
- (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1))
- args.sDacload.ucDacType = ATOM_DAC_A;
- else
- args.sDacload.ucDacType = ATOM_DAC_B;
-
- if (radeon_connector->devices & ATOM_DEVICE_CRT1_SUPPORT)
- args.sDacload.usDeviceID = cpu_to_le16(ATOM_DEVICE_CRT1_SUPPORT);
- else if (radeon_connector->devices & ATOM_DEVICE_CRT2_SUPPORT)
- args.sDacload.usDeviceID = cpu_to_le16(ATOM_DEVICE_CRT2_SUPPORT);
- else if (radeon_connector->devices & ATOM_DEVICE_CV_SUPPORT) {
- args.sDacload.usDeviceID = cpu_to_le16(ATOM_DEVICE_CV_SUPPORT);
- if (crev >= 3)
- args.sDacload.ucMisc = DAC_LOAD_MISC_YPrPb;
- } else if (radeon_connector->devices & ATOM_DEVICE_TV1_SUPPORT) {
- args.sDacload.usDeviceID = cpu_to_le16(ATOM_DEVICE_TV1_SUPPORT);
- if (crev >= 3)
- args.sDacload.ucMisc = DAC_LOAD_MISC_YPrPb;
- }
-
- atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-
- return true;
- } else
- return false;
-}
-
-static enum drm_connector_status
-radeon_atom_dac_detect(struct drm_encoder *encoder, struct drm_connector *connector)
-{
- struct drm_device *dev = encoder->dev;
- struct radeon_device *rdev = dev->dev_private;
- struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- struct radeon_connector *radeon_connector = to_radeon_connector(connector);
- uint32_t bios_0_scratch;
-
- if (!atombios_dac_load_detect(encoder, connector)) {
- DRM_DEBUG_KMS("detect returned false \n");
- return connector_status_unknown;
- }
-
- if (rdev->family >= CHIP_R600)
- bios_0_scratch = RREG32(R600_BIOS_0_SCRATCH);
- else
- bios_0_scratch = RREG32(RADEON_BIOS_0_SCRATCH);
-
- DRM_DEBUG_KMS("Bios 0 scratch %x %08x\n", bios_0_scratch, radeon_encoder->devices);
- if (radeon_connector->devices & ATOM_DEVICE_CRT1_SUPPORT) {
- if (bios_0_scratch & ATOM_S0_CRT1_MASK)
- return connector_status_connected;
- }
- if (radeon_connector->devices & ATOM_DEVICE_CRT2_SUPPORT) {
- if (bios_0_scratch & ATOM_S0_CRT2_MASK)
- return connector_status_connected;
- }
- if (radeon_connector->devices & ATOM_DEVICE_CV_SUPPORT) {
- if (bios_0_scratch & (ATOM_S0_CV_MASK|ATOM_S0_CV_MASK_A))
- return connector_status_connected;
- }
- if (radeon_connector->devices & ATOM_DEVICE_TV1_SUPPORT) {
- if (bios_0_scratch & (ATOM_S0_TV1_COMPOSITE | ATOM_S0_TV1_COMPOSITE_A))
- return connector_status_connected; /* CTV */
- else if (bios_0_scratch & (ATOM_S0_TV1_SVIDEO | ATOM_S0_TV1_SVIDEO_A))
- return connector_status_connected; /* STV */
- }
- return connector_status_disconnected;
-}
-
-static enum drm_connector_status
-radeon_atom_dig_detect(struct drm_encoder *encoder, struct drm_connector *connector)
-{
- struct drm_device *dev = encoder->dev;
- struct radeon_device *rdev = dev->dev_private;
- struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- struct radeon_connector *radeon_connector = to_radeon_connector(connector);
- struct drm_encoder *ext_encoder = radeon_atom_get_external_encoder(encoder);
- u32 bios_0_scratch;
-
- if (!ASIC_IS_DCE4(rdev))
- return connector_status_unknown;
-
- if (!ext_encoder)
- return connector_status_unknown;
-
- if ((radeon_connector->devices & ATOM_DEVICE_CRT_SUPPORT) == 0)
- return connector_status_unknown;
-
- /* load detect on the dp bridge */
- atombios_external_encoder_setup(encoder, ext_encoder,
- EXTERNAL_ENCODER_ACTION_V3_DACLOAD_DETECTION);
-
- bios_0_scratch = RREG32(R600_BIOS_0_SCRATCH);
-
- DRM_DEBUG_KMS("Bios 0 scratch %x %08x\n", bios_0_scratch, radeon_encoder->devices);
- if (radeon_connector->devices & ATOM_DEVICE_CRT1_SUPPORT) {
- if (bios_0_scratch & ATOM_S0_CRT1_MASK)
- return connector_status_connected;
- }
- if (radeon_connector->devices & ATOM_DEVICE_CRT2_SUPPORT) {
- if (bios_0_scratch & ATOM_S0_CRT2_MASK)
- return connector_status_connected;
- }
- if (radeon_connector->devices & ATOM_DEVICE_CV_SUPPORT) {
- if (bios_0_scratch & (ATOM_S0_CV_MASK|ATOM_S0_CV_MASK_A))
- return connector_status_connected;
- }
- if (radeon_connector->devices & ATOM_DEVICE_TV1_SUPPORT) {
- if (bios_0_scratch & (ATOM_S0_TV1_COMPOSITE | ATOM_S0_TV1_COMPOSITE_A))
- return connector_status_connected; /* CTV */
- else if (bios_0_scratch & (ATOM_S0_TV1_SVIDEO | ATOM_S0_TV1_SVIDEO_A))
- return connector_status_connected; /* STV */
- }
- return connector_status_disconnected;
-}
-
-void
-radeon_atom_ext_encoder_setup_ddc(struct drm_encoder *encoder)
-{
- struct drm_encoder *ext_encoder = radeon_atom_get_external_encoder(encoder);
-
- if (ext_encoder)
- /* ddc_setup on the dp bridge */
- atombios_external_encoder_setup(encoder, ext_encoder,
- EXTERNAL_ENCODER_ACTION_V3_DDC_SETUP);
-
-}
-
-static void radeon_atom_encoder_prepare(struct drm_encoder *encoder)
-{
- struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
-
- if ((radeon_encoder->active_device &
- (ATOM_DEVICE_DFP_SUPPORT | ATOM_DEVICE_LCD_SUPPORT)) ||
- radeon_encoder_is_dp_bridge(encoder)) {
- struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
- if (dig)
- dig->dig_encoder = radeon_atom_pick_dig_encoder(encoder);
- }
-
- radeon_atom_output_lock(encoder, true);
- radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
-
- if (connector) {
- struct radeon_connector *radeon_connector = to_radeon_connector(connector);
-
- /* select the clock/data port if it uses a router */
- if (radeon_connector->router.cd_valid)
- radeon_router_select_cd_port(radeon_connector);
-
- /* turn eDP panel on for mode set */
- if (connector->connector_type == DRM_MODE_CONNECTOR_eDP)
- atombios_set_edp_panel_power(connector,
- ATOM_TRANSMITTER_ACTION_POWER_ON);
- }
-
- /* this is needed for the pll/ss setup to work correctly in some cases */
- atombios_set_encoder_crtc_source(encoder);
-}
-
-static void radeon_atom_encoder_commit(struct drm_encoder *encoder)
-{
- radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_ON);
- radeon_atom_output_lock(encoder, false);
-}
-
-static void radeon_atom_encoder_disable(struct drm_encoder *encoder)
-{
- struct drm_device *dev = encoder->dev;
- struct radeon_device *rdev = dev->dev_private;
- struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- struct radeon_encoder_atom_dig *dig;
-
- /* check for pre-DCE3 cards with shared encoders;
- * can't really use the links individually, so don't disable
- * the encoder if it's in use by another connector
- */
- if (!ASIC_IS_DCE3(rdev)) {
- struct drm_encoder *other_encoder;
- struct radeon_encoder *other_radeon_encoder;
-
- list_for_each_entry(other_encoder, &dev->mode_config.encoder_list, head) {
- other_radeon_encoder = to_radeon_encoder(other_encoder);
- if ((radeon_encoder->encoder_id == other_radeon_encoder->encoder_id) &&
- drm_helper_encoder_in_use(other_encoder))
- goto disable_done;
- }
- }
-
- radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
-
- switch (radeon_encoder->encoder_id) {
- case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
- case ENCODER_OBJECT_ID_INTERNAL_LVDS:
- case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
- atombios_digital_setup(encoder, PANEL_ENCODER_ACTION_DISABLE);
- break;
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
- if (ASIC_IS_DCE4(rdev))
- /* disable the transmitter */
- atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0);
- else {
- /* disable the encoder and transmitter */
- atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0);
- atombios_dig_encoder_setup(encoder, ATOM_DISABLE, 0);
- }
- break;
- case ENCODER_OBJECT_ID_INTERNAL_DDI:
- case ENCODER_OBJECT_ID_INTERNAL_DVO1:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
- atombios_dvo_setup(encoder, ATOM_DISABLE);
- break;
- case ENCODER_OBJECT_ID_INTERNAL_DAC1:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
- case ENCODER_OBJECT_ID_INTERNAL_DAC2:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
- atombios_dac_setup(encoder, ATOM_DISABLE);
- if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT | ATOM_DEVICE_CV_SUPPORT))
- atombios_tv_setup(encoder, ATOM_DISABLE);
- break;
- }
-
-disable_done:
- if (radeon_encoder_is_digital(encoder)) {
- if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_HDMI)
- r600_hdmi_disable(encoder);
- dig = radeon_encoder->enc_priv;
- dig->dig_encoder = -1;
- }
- radeon_encoder->active_device = 0;
-}
-
-/* these are handled by the primary encoders */
-static void radeon_atom_ext_prepare(struct drm_encoder *encoder)
-{
-
-}
-
-static void radeon_atom_ext_commit(struct drm_encoder *encoder)
-{
-
-}
-
-static void
-radeon_atom_ext_mode_set(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
-
-}
-
-static void radeon_atom_ext_disable(struct drm_encoder *encoder)
-{
-
-}
-
-static void
-radeon_atom_ext_dpms(struct drm_encoder *encoder, int mode)
-{
-
-}
-
-static bool radeon_atom_ext_mode_fixup(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- return true;
-}
-
-static const struct drm_encoder_helper_funcs radeon_atom_ext_helper_funcs = {
- .dpms = radeon_atom_ext_dpms,
- .mode_fixup = radeon_atom_ext_mode_fixup,
- .prepare = radeon_atom_ext_prepare,
- .mode_set = radeon_atom_ext_mode_set,
- .commit = radeon_atom_ext_commit,
- .disable = radeon_atom_ext_disable,
- /* no detect for TMDS/LVDS yet */
-};
-
-static const struct drm_encoder_helper_funcs radeon_atom_dig_helper_funcs = {
- .dpms = radeon_atom_encoder_dpms,
- .mode_fixup = radeon_atom_mode_fixup,
- .prepare = radeon_atom_encoder_prepare,
- .mode_set = radeon_atom_encoder_mode_set,
- .commit = radeon_atom_encoder_commit,
- .disable = radeon_atom_encoder_disable,
- .detect = radeon_atom_dig_detect,
-};
-
-static const struct drm_encoder_helper_funcs radeon_atom_dac_helper_funcs = {
- .dpms = radeon_atom_encoder_dpms,
- .mode_fixup = radeon_atom_mode_fixup,
- .prepare = radeon_atom_encoder_prepare,
- .mode_set = radeon_atom_encoder_mode_set,
- .commit = radeon_atom_encoder_commit,
- .detect = radeon_atom_dac_detect,
-};
-
-void radeon_enc_destroy(struct drm_encoder *encoder)
-{
- struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- kfree(radeon_encoder->enc_priv);
- drm_encoder_cleanup(encoder);
- kfree(radeon_encoder);
-}
-
-static const struct drm_encoder_funcs radeon_atom_enc_funcs = {
- .destroy = radeon_enc_destroy,
-};
-
-struct radeon_encoder_atom_dac *
-radeon_atombios_set_dac_info(struct radeon_encoder *radeon_encoder)
-{
- struct drm_device *dev = radeon_encoder->base.dev;
- struct radeon_device *rdev = dev->dev_private;
- struct radeon_encoder_atom_dac *dac = kzalloc(sizeof(struct radeon_encoder_atom_dac), GFP_KERNEL);
-
- if (!dac)
- return NULL;
-
- dac->tv_std = radeon_atombios_get_tv_info(rdev);
- return dac;
-}
-
-struct radeon_encoder_atom_dig *
-radeon_atombios_set_dig_info(struct radeon_encoder *radeon_encoder)
-{
- int encoder_enum = (radeon_encoder->encoder_enum & ENUM_ID_MASK) >> ENUM_ID_SHIFT;
- struct radeon_encoder_atom_dig *dig = kzalloc(sizeof(struct radeon_encoder_atom_dig), GFP_KERNEL);
-
- if (!dig)
- return NULL;
-
- /* coherent mode by default */
- dig->coherent_mode = true;
- dig->dig_encoder = -1;
-
- if (encoder_enum == 2)
- dig->linkb = true;
- else
- dig->linkb = false;
-
- return dig;
-}
-
-void
-radeon_add_atom_encoder(struct drm_device *dev,
- uint32_t encoder_enum,
- uint32_t supported_device,
- u16 caps)
-{
- struct radeon_device *rdev = dev->dev_private;
- struct drm_encoder *encoder;
- struct radeon_encoder *radeon_encoder;
-
- /* see if we already added it */
- list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
- radeon_encoder = to_radeon_encoder(encoder);
- if (radeon_encoder->encoder_enum == encoder_enum) {
- radeon_encoder->devices |= supported_device;
- return;
- }
-
- }
-
- /* add a new one */
- radeon_encoder = kzalloc(sizeof(struct radeon_encoder), GFP_KERNEL);
- if (!radeon_encoder)
- return;
-
- encoder = &radeon_encoder->base;
- switch (rdev->num_crtc) {
- case 1:
- encoder->possible_crtcs = 0x1;
- break;
- case 2:
- default:
- encoder->possible_crtcs = 0x3;
- break;
- case 4:
- encoder->possible_crtcs = 0xf;
- break;
- case 6:
- encoder->possible_crtcs = 0x3f;
- break;
- }
-
- radeon_encoder->enc_priv = NULL;
-
- radeon_encoder->encoder_enum = encoder_enum;
- radeon_encoder->encoder_id = (encoder_enum & OBJECT_ID_MASK) >> OBJECT_ID_SHIFT;
- radeon_encoder->devices = supported_device;
- radeon_encoder->rmx_type = RMX_OFF;
- radeon_encoder->underscan_type = UNDERSCAN_OFF;
- radeon_encoder->is_ext_encoder = false;
- radeon_encoder->caps = caps;
-
- switch (radeon_encoder->encoder_id) {
- case ENCODER_OBJECT_ID_INTERNAL_LVDS:
- case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
- case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
- if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
- radeon_encoder->rmx_type = RMX_FULL;
- drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_LVDS);
- radeon_encoder->enc_priv = radeon_atombios_get_lvds_info(radeon_encoder);
- } else {
- drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_TMDS);
- radeon_encoder->enc_priv = radeon_atombios_set_dig_info(radeon_encoder);
- }
- drm_encoder_helper_add(encoder, &radeon_atom_dig_helper_funcs);
- break;
- case ENCODER_OBJECT_ID_INTERNAL_DAC1:
- drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_DAC);
- radeon_encoder->enc_priv = radeon_atombios_set_dac_info(radeon_encoder);
- drm_encoder_helper_add(encoder, &radeon_atom_dac_helper_funcs);
- break;
- case ENCODER_OBJECT_ID_INTERNAL_DAC2:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
- drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_TVDAC);
- radeon_encoder->enc_priv = radeon_atombios_set_dac_info(radeon_encoder);
- drm_encoder_helper_add(encoder, &radeon_atom_dac_helper_funcs);
- break;
- case ENCODER_OBJECT_ID_INTERNAL_DVO1:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
- case ENCODER_OBJECT_ID_INTERNAL_DDI:
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
- if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
- radeon_encoder->rmx_type = RMX_FULL;
- drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_LVDS);
- radeon_encoder->enc_priv = radeon_atombios_get_lvds_info(radeon_encoder);
- } else if (radeon_encoder->devices & (ATOM_DEVICE_CRT_SUPPORT)) {
- drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_DAC);
- radeon_encoder->enc_priv = radeon_atombios_set_dig_info(radeon_encoder);
- } else {
- drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_TMDS);
- radeon_encoder->enc_priv = radeon_atombios_set_dig_info(radeon_encoder);
- }
- drm_encoder_helper_add(encoder, &radeon_atom_dig_helper_funcs);
- break;
- case ENCODER_OBJECT_ID_SI170B:
- case ENCODER_OBJECT_ID_CH7303:
- case ENCODER_OBJECT_ID_EXTERNAL_SDVOA:
- case ENCODER_OBJECT_ID_EXTERNAL_SDVOB:
- case ENCODER_OBJECT_ID_TITFP513:
- case ENCODER_OBJECT_ID_VT1623:
- case ENCODER_OBJECT_ID_HDMI_SI1930:
- case ENCODER_OBJECT_ID_TRAVIS:
- case ENCODER_OBJECT_ID_NUTMEG:
- /* these are handled by the primary encoders */
- radeon_encoder->is_ext_encoder = true;
- if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
- drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_LVDS);
- else if (radeon_encoder->devices & (ATOM_DEVICE_CRT_SUPPORT))
- drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_DAC);
- else
- drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_TMDS);
- drm_encoder_helper_add(encoder, &radeon_atom_ext_helper_funcs);
- break;
- }
-}
rdev->gart.table_size >> PAGE_SHIFT);
}
#endif
- rdev->gart.table.ram.ptr = ptr;
- memset((void *)rdev->gart.table.ram.ptr, 0, rdev->gart.table_size);
+ rdev->gart.ptr = ptr;
+ memset((void *)rdev->gart.ptr, 0, rdev->gart.table_size);
return 0;
}
void radeon_gart_table_ram_free(struct radeon_device *rdev)
{
- if (rdev->gart.table.ram.ptr == NULL) {
+ if (rdev->gart.ptr == NULL) {
return;
}
#ifdef CONFIG_X86
if (rdev->family == CHIP_RS400 || rdev->family == CHIP_RS480 ||
rdev->family == CHIP_RS690 || rdev->family == CHIP_RS740) {
- set_memory_wb((unsigned long)rdev->gart.table.ram.ptr,
+ set_memory_wb((unsigned long)rdev->gart.ptr,
rdev->gart.table_size >> PAGE_SHIFT);
}
#endif
pci_free_consistent(rdev->pdev, rdev->gart.table_size,
- (void *)rdev->gart.table.ram.ptr,
+ (void *)rdev->gart.ptr,
rdev->gart.table_addr);
- rdev->gart.table.ram.ptr = NULL;
+ rdev->gart.ptr = NULL;
rdev->gart.table_addr = 0;
}
{
int r;
- if (rdev->gart.table.vram.robj == NULL) {
+ if (rdev->gart.robj == NULL) {
r = radeon_bo_create(rdev, rdev->gart.table_size,
PAGE_SIZE, true, RADEON_GEM_DOMAIN_VRAM,
- &rdev->gart.table.vram.robj);
+ &rdev->gart.robj);
if (r) {
return r;
}
uint64_t gpu_addr;
int r;
- r = radeon_bo_reserve(rdev->gart.table.vram.robj, false);
+ r = radeon_bo_reserve(rdev->gart.robj, false);
if (unlikely(r != 0))
return r;
- r = radeon_bo_pin(rdev->gart.table.vram.robj,
+ r = radeon_bo_pin(rdev->gart.robj,
RADEON_GEM_DOMAIN_VRAM, &gpu_addr);
if (r) {
- radeon_bo_unreserve(rdev->gart.table.vram.robj);
+ radeon_bo_unreserve(rdev->gart.robj);
return r;
}
- r = radeon_bo_kmap(rdev->gart.table.vram.robj,
- (void **)&rdev->gart.table.vram.ptr);
+ r = radeon_bo_kmap(rdev->gart.robj, &rdev->gart.ptr);
if (r)
- radeon_bo_unpin(rdev->gart.table.vram.robj);
- radeon_bo_unreserve(rdev->gart.table.vram.robj);
+ radeon_bo_unpin(rdev->gart.robj);
+ radeon_bo_unreserve(rdev->gart.robj);
rdev->gart.table_addr = gpu_addr;
return r;
}
-void radeon_gart_table_vram_free(struct radeon_device *rdev)
+void radeon_gart_table_vram_unpin(struct radeon_device *rdev)
{
int r;
- if (rdev->gart.table.vram.robj == NULL) {
+ if (rdev->gart.robj == NULL) {
return;
}
- r = radeon_bo_reserve(rdev->gart.table.vram.robj, false);
+ r = radeon_bo_reserve(rdev->gart.robj, false);
if (likely(r == 0)) {
- radeon_bo_kunmap(rdev->gart.table.vram.robj);
- radeon_bo_unpin(rdev->gart.table.vram.robj);
- radeon_bo_unreserve(rdev->gart.table.vram.robj);
+ radeon_bo_kunmap(rdev->gart.robj);
+ radeon_bo_unpin(rdev->gart.robj);
+ radeon_bo_unreserve(rdev->gart.robj);
+ rdev->gart.ptr = NULL;
}
- radeon_bo_unref(&rdev->gart.table.vram.robj);
+}
+
+void radeon_gart_table_vram_free(struct radeon_device *rdev)
+{
+ if (rdev->gart.robj == NULL) {
+ return;
+ }
+ radeon_gart_table_vram_unpin(rdev);
+ radeon_bo_unref(&rdev->gart.robj);
}
if (rdev->gart.pages[p]) {
if (!rdev->gart.ttm_alloced[p])
pci_unmap_page(rdev->pdev, rdev->gart.pages_addr[p],
- PAGE_SIZE, PCI_DMA_BIDIRECTIONAL);
+ PAGE_SIZE, PCI_DMA_BIDIRECTIONAL);
rdev->gart.pages[p] = NULL;
rdev->gart.pages_addr[p] = rdev->dummy_page.addr;
page_base = rdev->gart.pages_addr[p];
for (j = 0; j < (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); j++, t++) {
- radeon_gart_set_page(rdev, t, page_base);
+ if (rdev->gart.ptr) {
+ radeon_gart_set_page(rdev, t, page_base);
+ }
page_base += RADEON_GPU_PAGE_SIZE;
}
}
}
}
rdev->gart.pages[p] = pagelist[i];
- page_base = rdev->gart.pages_addr[p];
- for (j = 0; j < (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); j++, t++) {
- radeon_gart_set_page(rdev, t, page_base);
- page_base += RADEON_GPU_PAGE_SIZE;
+ if (rdev->gart.ptr) {
+ page_base = rdev->gart.pages_addr[p];
+ for (j = 0; j < (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); j++, t++) {
+ radeon_gart_set_page(rdev, t, page_base);
+ page_base += RADEON_GPU_PAGE_SIZE;
+ }
}
}
mb();
int i, j, t;
u64 page_base;
+ if (!rdev->gart.ptr) {
+ return;
+ }
for (i = 0, t = 0; i < rdev->gart.num_cpu_pages; i++) {
page_base = rdev->gart.pages_addr[i];
for (j = 0; j < (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); j++, t++) {
* Authors: Dave Airlie
* Alex Deucher
*/
+#include <linux/export.h>
+
#include "drmP.h"
#include "radeon_drm.h"
#include "radeon.h"
* radeon_ddc_probe
*
*/
-bool radeon_ddc_probe(struct radeon_connector *radeon_connector, bool requires_extended_probe)
+bool radeon_ddc_probe(struct radeon_connector *radeon_connector)
{
u8 out = 0x0;
u8 buf[8];
{
.addr = 0x50,
.flags = I2C_M_RD,
- .len = 1,
+ .len = 8,
.buf = buf,
}
};
- /* Read 8 bytes from i2c for extended probe of EDID header */
- if (requires_extended_probe)
- msgs[1].len = 8;
-
/* on hw with routers, select right port */
if (radeon_connector->router.ddc_valid)
radeon_router_select_ddc_port(radeon_connector);
if (ret != 2)
/* Couldn't find an accessible DDC on this connector */
return false;
- if (requires_extended_probe) {
- /* Probe also for valid EDID header
- * EDID header starts with:
- * 0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00.
- * Only the first 6 bytes must be valid as
- * drm_edid_block_valid() can fix the last 2 bytes */
- if (drm_edid_header_is_valid(buf) < 6) {
- /* Couldn't find an accessible EDID on this
- * connector */
- return false;
- }
+ /* Probe also for valid EDID header
+ * EDID header starts with:
+ * 0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00.
+ * Only the first 6 bytes must be valid as
+ * drm_edid_block_valid() can fix the last 2 bytes */
+ if (drm_edid_header_is_valid(buf) < 6) {
+ /* Couldn't find an accessible EDID on this
+ * connector */
+ return false;
}
return true;
}
/* Disable *all* interrupts */
rdev->irq.sw_int = false;
rdev->irq.gui_idle = false;
- for (i = 0; i < rdev->num_crtc; i++)
- rdev->irq.crtc_vblank_int[i] = false;
- for (i = 0; i < 6; i++) {
+ for (i = 0; i < RADEON_MAX_HPD_PINS; i++)
rdev->irq.hpd[i] = false;
+ for (i = 0; i < RADEON_MAX_CRTCS; i++) {
+ rdev->irq.crtc_vblank_int[i] = false;
rdev->irq.pflip[i] = false;
}
radeon_irq_set(rdev);
/* Disable *all* interrupts */
rdev->irq.sw_int = false;
rdev->irq.gui_idle = false;
- for (i = 0; i < rdev->num_crtc; i++)
- rdev->irq.crtc_vblank_int[i] = false;
- for (i = 0; i < 6; i++) {
+ for (i = 0; i < RADEON_MAX_HPD_PINS; i++)
rdev->irq.hpd[i] = false;
+ for (i = 0; i < RADEON_MAX_CRTCS; i++) {
+ rdev->irq.crtc_vblank_int[i] = false;
rdev->irq.pflip[i] = false;
}
radeon_irq_set(rdev);
}
+static bool radeon_msi_ok(struct radeon_device *rdev)
+{
+ /* RV370/RV380 was first asic with MSI support */
+ if (rdev->family < CHIP_RV380)
+ return false;
+
+ /* MSIs don't work on AGP */
+ if (rdev->flags & RADEON_IS_AGP)
+ return false;
+
+ /* force MSI on */
+ if (radeon_msi == 1)
+ return true;
+ else if (radeon_msi == 0)
+ return false;
+
+ /* Quirks */
+ /* HP RS690 only seems to work with MSIs. */
+ if ((rdev->pdev->device == 0x791f) &&
+ (rdev->pdev->subsystem_vendor == 0x103c) &&
+ (rdev->pdev->subsystem_device == 0x30c2))
+ return true;
+
+ /* Dell RS690 only seems to work with MSIs. */
+ if ((rdev->pdev->device == 0x791f) &&
+ (rdev->pdev->subsystem_vendor == 0x1028) &&
+ (rdev->pdev->subsystem_device == 0x01fd))
+ return true;
+
+ if (rdev->flags & RADEON_IS_IGP) {
+ /* APUs work fine with MSIs */
+ if (rdev->family >= CHIP_PALM)
+ return true;
+ /* lots of IGPs have problems with MSIs */
+ return false;
+ }
+
+ return true;
+}
+
int radeon_irq_kms_init(struct radeon_device *rdev)
{
int i;
}
/* enable msi */
rdev->msi_enabled = 0;
- /* MSIs don't seem to work reliably on all IGP
- * chips. Disable MSI on them for now.
- */
- if ((rdev->family >= CHIP_RV380) &&
- ((!(rdev->flags & RADEON_IS_IGP)) || (rdev->family >= CHIP_PALM)) &&
- (!(rdev->flags & RADEON_IS_AGP))) {
+
+ if (radeon_msi_ok(rdev)) {
int ret = pci_enable_msi(rdev->pdev);
if (!ret) {
rdev->msi_enabled = 1;
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
- struct drm_device *dev = crtc->dev;
- struct radeon_device *rdev = dev->dev_private;
-
- /* adjust pm to upcoming mode change */
- radeon_pm_compute_clocks(rdev);
-
if (!radeon_crtc_scaling_mode_fixup(crtc, mode, adjusted_mode))
return false;
return true;
struct radeon_i2c_chan *ddc_bus;
/* some systems have an hdmi and vga port with a shared ddc line */
bool shared_ddc;
- /* for some Radeon chip families we apply an additional EDID header
- check as part of the DDC probe */
- bool requires_extended_probe;
bool use_digital;
/* we need to mind the EDID between detect
and get modes due to analog/digital/tvencoder */
struct drm_gem_object *obj;
};
+#define ENCODER_MODE_IS_DP(em) (((em) == ATOM_ENCODER_MODE_DP) || \
+ ((em) == ATOM_ENCODER_MODE_DP_MST))
extern enum radeon_tv_std
radeon_combios_get_tv_info(struct radeon_device *rdev);
extern struct drm_connector *
radeon_get_connector_for_encoder(struct drm_encoder *encoder);
-extern bool radeon_encoder_is_dp_bridge(struct drm_encoder *encoder);
-extern bool radeon_connector_encoder_is_dp_bridge(struct drm_connector *connector);
+extern u16 radeon_encoder_get_dp_bridge_encoder_id(struct drm_encoder *encoder);
+extern u16 radeon_connector_encoder_get_dp_bridge_encoder_id(struct drm_connector *connector);
extern bool radeon_connector_encoder_is_hbr2(struct drm_connector *connector);
extern bool radeon_connector_is_dp12_capable(struct drm_connector *connector);
int action, uint8_t lane_num,
uint8_t lane_set);
extern void radeon_atom_ext_encoder_setup_ddc(struct drm_encoder *encoder);
-extern struct drm_encoder *radeon_atom_get_external_encoder(struct drm_encoder *encoder);
+extern struct drm_encoder *radeon_get_external_encoder(struct drm_encoder *encoder);
extern int radeon_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode,
u8 write_byte, u8 *read_byte);
u8 val);
extern void radeon_router_select_ddc_port(struct radeon_connector *radeon_connector);
extern void radeon_router_select_cd_port(struct radeon_connector *radeon_connector);
-extern bool radeon_ddc_probe(struct radeon_connector *radeon_connector,
- bool requires_extended_probe);
+extern bool radeon_ddc_probe(struct radeon_connector *radeon_connector);
extern int radeon_ddc_get_modes(struct radeon_connector *radeon_connector);
extern struct drm_encoder *radeon_best_encoder(struct drm_connector *connector);
#define ACPI_AC_CLASS "ac_adapter"
+int radeon_pm_get_type_index(struct radeon_device *rdev,
+ enum radeon_pm_state_type ps_type,
+ int instance)
+{
+ int i;
+ int found_instance = -1;
+
+ for (i = 0; i < rdev->pm.num_power_states; i++) {
+ if (rdev->pm.power_state[i].type == ps_type) {
+ found_instance++;
+ if (found_instance == instance)
+ return i;
+ }
+ }
+ /* return default if no match */
+ return rdev->pm.default_power_state_index;
+}
+
#ifdef CONFIG_ACPI
static int radeon_acpi_event(struct notifier_block *nb,
unsigned long val,
{
int r;
- if (rdev->gart.table.ram.ptr) {
+ if (rdev->gart.ptr) {
WARN(1, "RS400 GART already initialized\n");
return 0;
}
int rs400_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr)
{
uint32_t entry;
+ u32 *gtt = rdev->gart.ptr;
if (i < 0 || i > rdev->gart.num_gpu_pages) {
return -EINVAL;
((upper_32_bits(addr) & 0xff) << 4) |
RS400_PTE_WRITEABLE | RS400_PTE_READABLE;
entry = cpu_to_le32(entry);
- rdev->gart.table.ram.ptr[i] = entry;
+ gtt[i] = entry;
return 0;
}
default:
break;
}
+ radeon_hpd_set_polarity(rdev, radeon_connector->hpd.hpd);
}
if (rdev->irq.installed)
rs600_irq_set(rdev);
{
int r;
- if (rdev->gart.table.vram.robj) {
+ if (rdev->gart.robj) {
WARN(1, "RS600 GART already initialized\n");
return 0;
}
u32 tmp;
int r, i;
- if (rdev->gart.table.vram.robj == NULL) {
+ if (rdev->gart.robj == NULL) {
dev_err(rdev->dev, "No VRAM object for PCIE GART.\n");
return -EINVAL;
}
void rs600_gart_disable(struct radeon_device *rdev)
{
u32 tmp;
- int r;
/* FIXME: disable out of gart access */
WREG32_MC(R_000100_MC_PT0_CNTL, 0);
tmp = RREG32_MC(R_000009_MC_CNTL1);
WREG32_MC(R_000009_MC_CNTL1, tmp & C_000009_ENABLE_PAGE_TABLES);
- if (rdev->gart.table.vram.robj) {
- r = radeon_bo_reserve(rdev->gart.table.vram.robj, false);
- if (r == 0) {
- radeon_bo_kunmap(rdev->gart.table.vram.robj);
- radeon_bo_unpin(rdev->gart.table.vram.robj);
- radeon_bo_unreserve(rdev->gart.table.vram.robj);
- }
- }
+ radeon_gart_table_vram_unpin(rdev);
}
void rs600_gart_fini(struct radeon_device *rdev)
int rs600_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr)
{
- void __iomem *ptr = (void *)rdev->gart.table.vram.ptr;
+ void __iomem *ptr = (void *)rdev->gart.ptr;
if (i < 0 || i > rdev->gart.num_gpu_pages) {
return -EINVAL;
u32 tmp;
int r, i;
- if (rdev->gart.table.vram.robj == NULL) {
+ if (rdev->gart.robj == NULL) {
dev_err(rdev->dev, "No VRAM object for PCIE GART.\n");
return -EINVAL;
}
void rv770_pcie_gart_disable(struct radeon_device *rdev)
{
u32 tmp;
- int i, r;
+ int i;
/* Disable all tables */
for (i = 0; i < 7; i++)
WREG32(MC_VM_MB_L1_TLB1_CNTL, tmp);
WREG32(MC_VM_MB_L1_TLB2_CNTL, tmp);
WREG32(MC_VM_MB_L1_TLB3_CNTL, tmp);
- if (rdev->gart.table.vram.robj) {
- r = radeon_bo_reserve(rdev->gart.table.vram.robj, false);
- if (likely(r == 0)) {
- radeon_bo_kunmap(rdev->gart.table.vram.robj);
- radeon_bo_unpin(rdev->gart.table.vram.robj);
- radeon_bo_unreserve(rdev->gart.table.vram.robj);
- }
- }
+ radeon_gart_table_vram_unpin(rdev);
}
void rv770_pcie_gart_fini(struct radeon_device *rdev)
WREG32(MC_VM_SYSTEM_APERTURE_HIGH_ADDR,
rdev->mc.vram_end >> 12);
}
- WREG32(MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR, 0);
+ WREG32(MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR, rdev->vram_scratch.gpu_addr >> 12);
tmp = ((rdev->mc.vram_end >> 24) & 0xFFFF) << 16;
tmp |= ((rdev->mc.vram_start >> 24) & 0xFFFF);
WREG32(MC_VM_FB_LOCATION, tmp);
}
-static int rv770_vram_scratch_init(struct radeon_device *rdev)
-{
- int r;
- u64 gpu_addr;
-
- if (rdev->vram_scratch.robj == NULL) {
- r = radeon_bo_create(rdev, RADEON_GPU_PAGE_SIZE,
- PAGE_SIZE, true, RADEON_GEM_DOMAIN_VRAM,
- &rdev->vram_scratch.robj);
- if (r) {
- return r;
- }
- }
-
- r = radeon_bo_reserve(rdev->vram_scratch.robj, false);
- if (unlikely(r != 0))
- return r;
- r = radeon_bo_pin(rdev->vram_scratch.robj,
- RADEON_GEM_DOMAIN_VRAM, &gpu_addr);
- if (r) {
- radeon_bo_unreserve(rdev->vram_scratch.robj);
- return r;
- }
- r = radeon_bo_kmap(rdev->vram_scratch.robj,
- (void **)&rdev->vram_scratch.ptr);
- if (r)
- radeon_bo_unpin(rdev->vram_scratch.robj);
- radeon_bo_unreserve(rdev->vram_scratch.robj);
-
- return r;
-}
-
-static void rv770_vram_scratch_fini(struct radeon_device *rdev)
-{
- int r;
-
- if (rdev->vram_scratch.robj == NULL) {
- return;
- }
- r = radeon_bo_reserve(rdev->vram_scratch.robj, false);
- if (likely(r == 0)) {
- radeon_bo_kunmap(rdev->vram_scratch.robj);
- radeon_bo_unpin(rdev->vram_scratch.robj);
- radeon_bo_unreserve(rdev->vram_scratch.robj);
- }
- radeon_bo_unref(&rdev->vram_scratch.robj);
-}
-
void r700_vram_gtt_location(struct radeon_device *rdev, struct radeon_mc *mc)
{
u64 size_bf, size_af;
}
}
+ r = r600_vram_scratch_init(rdev);
+ if (r)
+ return r;
+
rv770_mc_program(rdev);
if (rdev->flags & RADEON_IS_AGP) {
rv770_agp_enable(rdev);
if (r)
return r;
}
- r = rv770_vram_scratch_init(rdev);
- if (r)
- return r;
+
rv770_gpu_init(rdev);
r = r600_blit_init(rdev);
if (r) {
radeon_ib_pool_fini(rdev);
radeon_irq_kms_fini(rdev);
rv770_pcie_gart_fini(rdev);
- rv770_vram_scratch_fini(rdev);
+ r600_vram_scratch_fini(rdev);
radeon_gem_fini(rdev);
radeon_fence_driver_fini(rdev);
radeon_agp_fini(rdev);
* WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/
+#include <linux/module.h>
+
#include "drmP.h"
#include "savage_drm.h"
#include "savage_drv.h"
*
*/
+#include <linux/module.h>
+
#include "drmP.h"
#include "sis_drm.h"
#include "sis_drv.h"
* Gareth Hughes <gareth@valinux.com>
*/
+#include <linux/module.h>
+
#include "drmP.h"
#include "tdfx_drv.h"
#include <linux/file.h>
#include <linux/swap.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include "drm_cache.h"
#include "drm_mem_util.h"
#include "ttm/ttm_module.h"
* DEALINGS IN THE SOFTWARE.
*/
+#include <linux/module.h>
+
#include "drmP.h"
#include "via_drm.h"
#include "via_drv.h"
* USE OR OTHER DEALINGS IN THE SOFTWARE.
*
**************************************************************************/
+#include <linux/module.h>
#include "drmP.h"
#include "vmwgfx_drv.h"
#define DRM_IOCTL_VMW_PRESENT_READBACK \
DRM_IOW(DRM_COMMAND_BASE + DRM_VMW_PRESENT_READBACK, \
struct drm_vmw_present_readback_arg)
+#define DRM_IOCTL_VMW_UPDATE_LAYOUT \
+ DRM_IOW(DRM_COMMAND_BASE + DRM_VMW_UPDATE_LAYOUT, \
+ struct drm_vmw_update_layout_arg)
/**
* The core DRM version of this macro doesn't account for
VMW_IOCTL_DEF(VMW_PRESENT_READBACK,
vmw_present_readback_ioctl,
DRM_MASTER | DRM_AUTH | DRM_UNLOCKED),
+ VMW_IOCTL_DEF(VMW_UPDATE_LAYOUT,
+ vmw_kms_update_layout_ioctl,
+ DRM_MASTER | DRM_UNLOCKED),
};
static struct pci_device_id vmw_pci_id_list[] = {
#include "ttm/ttm_module.h"
#include "vmwgfx_fence.h"
-#define VMWGFX_DRIVER_DATE "20111008"
+#define VMWGFX_DRIVER_DATE "20111025"
#define VMWGFX_DRIVER_MAJOR 2
-#define VMWGFX_DRIVER_MINOR 2
+#define VMWGFX_DRIVER_MINOR 3
#define VMWGFX_DRIVER_PATCHLEVEL 0
#define VMWGFX_FILE_PAGE_OFFSET 0x00100000
#define VMWGFX_FIFO_STATIC_SIZE (1024*1024)
struct drm_vmw_fence_rep __user *user_fence_rep,
struct drm_vmw_rect *clips,
uint32_t num_clips);
+int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
/**
* Overlay control - vmwgfx_overlay.c
*
**************************************************************************/
+#include <linux/export.h>
+
#include "drmP.h"
#include "vmwgfx_drv.h"
struct vmw_dma_buffer *dmabuf = NULL;
int ret;
+ /* A lot of the code assumes this */
+ if (handle && (width != 64 || height != 64))
+ return -EINVAL;
+
if (handle) {
ret = vmw_user_surface_lookup_handle(dev_priv, tfile,
handle, &surface);
if (!ret) {
if (!surface->snooper.image) {
DRM_ERROR("surface not suitable for cursor\n");
+ vmw_surface_unreference(&surface);
return -EINVAL;
}
} else {
return 0;
}
- vmw_cursor_update_position(dev_priv, true, du->cursor_x, du->cursor_y);
+ vmw_cursor_update_position(dev_priv, true,
+ du->cursor_x + du->hotspot_x,
+ du->cursor_y + du->hotspot_y);
return 0;
}
du->cursor_y = y + crtc->y;
vmw_cursor_update_position(dev_priv, shown,
- du->cursor_x, du->cursor_y);
+ du->cursor_x + du->hotspot_x,
+ du->cursor_y + du->hotspot_y);
return 0;
}
SVGA3dCmdHeader header;
SVGA3dCmdSurfaceDMA dma;
} *cmd;
- int ret;
+ int i, ret;
cmd = container_of(header, struct vmw_dma_cmd, header);
box_count = (cmd->header.size - sizeof(SVGA3dCmdSurfaceDMA)) /
sizeof(SVGA3dCopyBox);
- if (cmd->dma.guest.pitch != (64 * 4) ||
- cmd->dma.guest.ptr.offset % PAGE_SIZE ||
+ if (cmd->dma.guest.ptr.offset % PAGE_SIZE ||
box->x != 0 || box->y != 0 || box->z != 0 ||
box->srcx != 0 || box->srcy != 0 || box->srcz != 0 ||
- box->w != 64 || box->h != 64 || box->d != 1 ||
- box_count != 1) {
+ box->d != 1 || box_count != 1) {
/* TODO handle none page aligned offsets */
- /* TODO handle partial uploads and pitch != 256 */
- /* TODO handle more then one copy (size != 64) */
- DRM_ERROR("lazy programmer, can't handle weird stuff\n");
+ /* TODO handle more dst & src != 0 */
+ /* TODO handle more then one copy */
+ DRM_ERROR("Cant snoop dma request for cursor!\n");
+ DRM_ERROR("(%u, %u, %u) (%u, %u, %u) (%ux%ux%u) %u %u\n",
+ box->srcx, box->srcy, box->srcz,
+ box->x, box->y, box->z,
+ box->w, box->h, box->d, box_count,
+ cmd->dma.guest.ptr.offset);
return;
}
virtual = ttm_kmap_obj_virtual(&map, &dummy);
- memcpy(srf->snooper.image, virtual, 64*64*4);
+ if (box->w == 64 && cmd->dma.guest.pitch == 64*4) {
+ memcpy(srf->snooper.image, virtual, 64*64*4);
+ } else {
+ /* Image is unsigned pointer. */
+ for (i = 0; i < box->h; i++)
+ memcpy(srf->snooper.image + i * 64,
+ virtual + i * cmd->dma.guest.pitch,
+ box->w * 4);
+ }
+
srf->snooper.age++;
/* we can't call this function from this function since execbuf has
top = clips->y1;
bottom = clips->y2;
- clips_ptr = clips;
- for (i = 1; i < num_clips; i++, clips_ptr += inc) {
+ /* skip the first clip rect */
+ for (i = 1, clips_ptr = clips + inc;
+ i < num_clips; i++, clips_ptr += inc) {
left = min_t(int, left, (int)clips_ptr->x1);
right = max_t(int, right, (int)clips_ptr->x2);
top = min_t(int, top, (int)clips_ptr->y1);
required_size = mode_cmd->pitch * mode_cmd->height;
if (unlikely(required_size > (u64) dev_priv->vram_size)) {
DRM_ERROR("VRAM size is too small for requested mode.\n");
- return NULL;
+ return ERR_PTR(-ENOMEM);
}
/*
* drm_encoder_cleanup which takes the lock we deadlock.
*/
drm_mode_config_cleanup(dev_priv->dev);
- vmw_kms_close_legacy_display_system(dev_priv);
+ if (dev_priv->sou_priv)
+ vmw_kms_close_screen_object_display(dev_priv);
+ else
+ vmw_kms_close_legacy_display_system(dev_priv);
return 0;
}
du->pref_width = rects[du->unit].w;
du->pref_height = rects[du->unit].h;
du->pref_active = true;
+ du->gui_x = rects[du->unit].x;
+ du->gui_y = rects[du->unit].y;
} else {
du->pref_width = 800;
du->pref_height = 600;
uint32_t num_displays;
struct drm_device *dev = connector->dev;
struct vmw_private *dev_priv = vmw_priv(dev);
+ struct vmw_display_unit *du = vmw_connector_to_du(connector);
mutex_lock(&dev_priv->hw_mutex);
num_displays = vmw_read(dev_priv, SVGA_REG_NUM_DISPLAYS);
mutex_unlock(&dev_priv->hw_mutex);
- return ((vmw_connector_to_du(connector)->unit < num_displays) ?
+ return ((vmw_connector_to_du(connector)->unit < num_displays &&
+ du->pref_active) ?
connector_status_connected : connector_status_disconnected);
}
{ DRM_MODE("", 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) },
};
+/**
+ * vmw_guess_mode_timing - Provide fake timings for a
+ * 60Hz vrefresh mode.
+ *
+ * @mode - Pointer to a struct drm_display_mode with hdisplay and vdisplay
+ * members filled in.
+ */
+static void vmw_guess_mode_timing(struct drm_display_mode *mode)
+{
+ mode->hsync_start = mode->hdisplay + 50;
+ mode->hsync_end = mode->hsync_start + 50;
+ mode->htotal = mode->hsync_end + 50;
+
+ mode->vsync_start = mode->vdisplay + 50;
+ mode->vsync_end = mode->vsync_start + 50;
+ mode->vtotal = mode->vsync_end + 50;
+
+ mode->clock = (u32)mode->htotal * (u32)mode->vtotal / 100 * 6;
+ mode->vrefresh = drm_mode_vrefresh(mode);
+}
+
+
int vmw_du_connector_fill_modes(struct drm_connector *connector,
uint32_t max_width, uint32_t max_height)
{
return 0;
mode->hdisplay = du->pref_width;
mode->vdisplay = du->pref_height;
- mode->vrefresh = drm_mode_vrefresh(mode);
+ vmw_guess_mode_timing(mode);
+
if (vmw_kms_validate_mode_vram(dev_priv, mode->hdisplay * 2,
mode->vdisplay)) {
drm_mode_probed_add(connector, mode);
+ } else {
+ drm_mode_destroy(dev, mode);
+ mode = NULL;
+ }
- if (du->pref_mode) {
- list_del_init(&du->pref_mode->head);
- drm_mode_destroy(dev, du->pref_mode);
- }
-
- du->pref_mode = mode;
+ if (du->pref_mode) {
+ list_del_init(&du->pref_mode->head);
+ drm_mode_destroy(dev, du->pref_mode);
}
+
+ /* mode might be null here, this is intended */
+ du->pref_mode = mode;
}
for (i = 0; vmw_kms_connector_builtin[i].type != 0; i++) {
drm_mode_probed_add(connector, mode);
}
+ /* Move the prefered mode first, help apps pick the right mode. */
+ if (du->pref_mode)
+ list_move(&du->pref_mode->head, &connector->probed_modes);
+
drm_mode_connector_list_update(connector);
return 1;
{
return 0;
}
+
+
+int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct vmw_private *dev_priv = vmw_priv(dev);
+ struct drm_vmw_update_layout_arg *arg =
+ (struct drm_vmw_update_layout_arg *)data;
+ struct vmw_master *vmaster = vmw_master(file_priv->master);
+ void __user *user_rects;
+ struct drm_vmw_rect *rects;
+ unsigned rects_size;
+ int ret;
+ int i;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+
+ ret = ttm_read_lock(&vmaster->lock, true);
+ if (unlikely(ret != 0))
+ return ret;
+
+ if (!arg->num_outputs) {
+ struct drm_vmw_rect def_rect = {0, 0, 800, 600};
+ vmw_du_update_layout(dev_priv, 1, &def_rect);
+ goto out_unlock;
+ }
+
+ rects_size = arg->num_outputs * sizeof(struct drm_vmw_rect);
+ rects = kzalloc(rects_size, GFP_KERNEL);
+ if (unlikely(!rects)) {
+ ret = -ENOMEM;
+ goto out_unlock;
+ }
+
+ user_rects = (void __user *)(unsigned long)arg->rects;
+ ret = copy_from_user(rects, user_rects, rects_size);
+ if (unlikely(ret != 0)) {
+ DRM_ERROR("Failed to get rects.\n");
+ ret = -EFAULT;
+ goto out_free;
+ }
+
+ for (i = 0; i < arg->num_outputs; ++i) {
+ if (rects->x < 0 ||
+ rects->y < 0 ||
+ rects->x + rects->w > mode_config->max_width ||
+ rects->y + rects->h > mode_config->max_height) {
+ DRM_ERROR("Invalid GUI layout.\n");
+ ret = -EINVAL;
+ goto out_free;
+ }
+ }
+
+ vmw_du_update_layout(dev_priv, arg->num_outputs, rects);
+
+out_free:
+ kfree(rects);
+out_unlock:
+ ttm_read_unlock(&vmaster->lock);
+ return ret;
+}
unsigned pref_height;
bool pref_active;
struct drm_display_mode *pref_mode;
+
+ /*
+ * Gui positioning
+ */
+ int gui_x;
+ int gui_y;
+ bool is_implicit;
};
#define vmw_crtc_to_du(x) \
int vmw_du_connector_set_property(struct drm_connector *connector,
struct drm_property *property,
uint64_t val);
-int vmw_du_update_layout(struct vmw_private *dev_priv, unsigned num,
- struct drm_vmw_rect *rects);
+
/*
* Legacy display unit functions - vmwgfx_ldu.c
ldu->base.pref_width = 800;
ldu->base.pref_height = 600;
ldu->base.pref_mode = NULL;
+ ldu->base.is_implicit = true;
drm_connector_init(dev, connector, &vmw_legacy_connector_funcs,
- DRM_MODE_CONNECTOR_LVDS);
+ DRM_MODE_CONNECTOR_VIRTUAL);
connector->status = vmw_du_connector_detect(connector, true);
drm_encoder_init(dev, encoder, &vmw_legacy_encoder_funcs,
- DRM_MODE_ENCODER_LVDS);
+ DRM_MODE_ENCODER_VIRTUAL);
drm_mode_connector_attach_encoder(connector, encoder);
encoder->possible_crtcs = (1 << unit);
encoder->possible_clones = 0;
container_of(x, struct vmw_screen_object_unit, base.connector)
struct vmw_screen_object_display {
- struct list_head active;
+ unsigned num_implicit;
- unsigned num_active;
- unsigned last_num_active;
-
- struct vmw_framebuffer *fb;
+ struct vmw_framebuffer *implicit_fb;
};
/**
struct vmw_dma_buffer *buffer; /**< Backing store buffer */
bool defined;
-
- struct list_head active;
+ bool active_implicit;
};
static void vmw_sou_destroy(struct vmw_screen_object_unit *sou)
{
- list_del_init(&sou->active);
vmw_display_unit_cleanup(&sou->base);
kfree(sou);
}
vmw_sou_destroy(vmw_crtc_to_sou(crtc));
}
-static int vmw_sou_del_active(struct vmw_private *vmw_priv,
+static void vmw_sou_del_active(struct vmw_private *vmw_priv,
struct vmw_screen_object_unit *sou)
{
struct vmw_screen_object_display *ld = vmw_priv->sou_priv;
- if (list_empty(&sou->active))
- return 0;
- /* Must init otherwise list_empty(&sou->active) will not work. */
- list_del_init(&sou->active);
- if (--(ld->num_active) == 0) {
- BUG_ON(!ld->fb);
- if (ld->fb->unpin)
- ld->fb->unpin(ld->fb);
- ld->fb = NULL;
+ if (sou->active_implicit) {
+ if (--(ld->num_implicit) == 0)
+ ld->implicit_fb = NULL;
+ sou->active_implicit = false;
}
-
- return 0;
}
-static int vmw_sou_add_active(struct vmw_private *vmw_priv,
+static void vmw_sou_add_active(struct vmw_private *vmw_priv,
struct vmw_screen_object_unit *sou,
struct vmw_framebuffer *vfb)
{
struct vmw_screen_object_display *ld = vmw_priv->sou_priv;
- struct vmw_screen_object_unit *entry;
- struct list_head *at;
-
- BUG_ON(!ld->num_active && ld->fb);
- if (vfb != ld->fb) {
- if (ld->fb && ld->fb->unpin)
- ld->fb->unpin(ld->fb);
- if (vfb->pin)
- vfb->pin(vfb);
- ld->fb = vfb;
- }
-
- if (!list_empty(&sou->active))
- return 0;
- at = &ld->active;
- list_for_each_entry(entry, &ld->active, active) {
- if (entry->base.unit > sou->base.unit)
- break;
+ BUG_ON(!ld->num_implicit && ld->implicit_fb);
- at = &entry->active;
+ if (!sou->active_implicit && sou->base.is_implicit) {
+ ld->implicit_fb = vfb;
+ sou->active_implicit = true;
+ ld->num_implicit++;
}
-
- list_add(&sou->active, at);
-
- ld->num_active++;
-
- return 0;
}
/**
(sou->base.unit == 0 ? SVGA_SCREEN_IS_PRIMARY : 0);
cmd->obj.size.width = mode->hdisplay;
cmd->obj.size.height = mode->vdisplay;
- cmd->obj.root.x = x;
- cmd->obj.root.y = y;
+ if (sou->base.is_implicit) {
+ cmd->obj.root.x = x;
+ cmd->obj.root.y = y;
+ } else {
+ cmd->obj.root.x = sou->base.gui_x;
+ cmd->obj.root.y = sou->base.gui_y;
+ }
/* Ok to assume that buffer is pinned in vram */
vmw_bo_get_guest_ptr(&sou->buffer->base, &cmd->obj.backingStore.ptr);
}
/* sou only supports one fb active at the time */
- if (dev_priv->sou_priv->fb && vfb &&
- !(dev_priv->sou_priv->num_active == 1 &&
- !list_empty(&sou->active)) &&
- dev_priv->sou_priv->fb != vfb) {
+ if (sou->base.is_implicit &&
+ dev_priv->sou_priv->implicit_fb && vfb &&
+ !(dev_priv->sou_priv->num_implicit == 1 &&
+ sou->active_implicit) &&
+ dev_priv->sou_priv->implicit_fb != vfb) {
DRM_ERROR("Multiple framebuffers not supported\n");
return -EINVAL;
}
encoder = &sou->base.encoder;
connector = &sou->base.connector;
- INIT_LIST_HEAD(&sou->active);
+ sou->active_implicit = false;
sou->base.pref_active = (unit == 0);
sou->base.pref_width = 800;
sou->base.pref_height = 600;
sou->base.pref_mode = NULL;
+ sou->base.is_implicit = true;
drm_connector_init(dev, connector, &vmw_legacy_connector_funcs,
- DRM_MODE_CONNECTOR_LVDS);
+ DRM_MODE_CONNECTOR_VIRTUAL);
connector->status = vmw_du_connector_detect(connector, true);
drm_encoder_init(dev, encoder, &vmw_screen_object_encoder_funcs,
- DRM_MODE_ENCODER_LVDS);
+ DRM_MODE_ENCODER_VIRTUAL);
drm_mode_connector_attach_encoder(connector, encoder);
encoder->possible_crtcs = (1 << unit);
encoder->possible_clones = 0;
if (unlikely(!dev_priv->sou_priv))
goto err_no_mem;
- INIT_LIST_HEAD(&dev_priv->sou_priv->active);
- dev_priv->sou_priv->num_active = 0;
- dev_priv->sou_priv->last_num_active = 0;
- dev_priv->sou_priv->fb = NULL;
+ dev_priv->sou_priv->num_implicit = 0;
+ dev_priv->sou_priv->implicit_fb = NULL;
ret = drm_vblank_init(dev, VMWGFX_NUM_DISPLAY_UNITS);
if (unlikely(ret != 0))
drm_vblank_cleanup(dev);
- if (!list_empty(&dev_priv->sou_priv->active))
- DRM_ERROR("Still have active outputs when unloading driver");
-
kfree(dev_priv->sou_priv);
return 0;
while (new_bus) {
new_bridge = new_bus->self;
- if (new_bridge) {
- /* go through list of devices already registered */
- list_for_each_entry(same_bridge_vgadev, &vga_list, list) {
- bus = same_bridge_vgadev->pdev->bus;
- bridge = bus->self;
-
- /* see if the share a bridge with this device */
- if (new_bridge == bridge) {
- /* if their direct parent bridge is the same
- as any bridge of this device then it can't be used
- for that device */
- same_bridge_vgadev->bridge_has_one_vga = false;
- }
+ /* go through list of devices already registered */
+ list_for_each_entry(same_bridge_vgadev, &vga_list, list) {
+ bus = same_bridge_vgadev->pdev->bus;
+ bridge = bus->self;
+
+ /* see if the share a bridge with this device */
+ if (new_bridge == bridge) {
+ /* if their direct parent bridge is the same
+ as any bridge of this device then it can't be used
+ for that device */
+ same_bridge_vgadev->bridge_has_one_vga = false;
+ }
- /* now iterate the previous devices bridge hierarchy */
- /* if the new devices parent bridge is in the other devices
- hierarchy then we can't use it to control this device */
- while (bus) {
- bridge = bus->self;
- if (bridge) {
- if (bridge == vgadev->pdev->bus->self)
- vgadev->bridge_has_one_vga = false;
- }
- bus = bus->parent;
+ /* now iterate the previous devices bridge hierarchy */
+ /* if the new devices parent bridge is in the other devices
+ hierarchy then we can't use it to control this device */
+ while (bus) {
+ bridge = bus->self;
+ if (bridge) {
+ if (bridge == vgadev->pdev->bus->self)
+ vgadev->bridge_has_one_vga = false;
}
+ bus = bus->parent;
}
}
new_bus = new_bus->parent;
if (hid->product >= USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI &&
hid->product <= USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS)
table = macbookair_fn_keys;
- else if (hid->product >= USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI &&
- hid->product <= USB_DEVICE_ID_APPLE_WELLSPRING6_JIS)
- table = macbookair_fn_keys;
else if (hid->product < 0x21d || hid->product >= 0x300)
table = powerbook_fn_keys;
else
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/hid.h>
+#include <linux/module.h>
#include "hid-ids.h"
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/sched.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/poll.h>
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/hid.h>
+#include <linux/module.h>
#include "hid-ids.h"
#include <linux/hid.h>
#include <linux/input.h>
#include <linux/usb.h>
+#include <linux/module.h>
#include "hid-ids.h"
#include "usbhid/usbhid.h"
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/hid.h>
+#include <linux/module.h>
#include "hid-ids.h"
#ifdef CONFIG_GREENASIA_FF
#include <linux/hid.h>
#include <linux/input.h>
+#include <linux/module.h>
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/completion.h>
#include <linux/uaccess.h>
+#include <linux/module.h>
#define PICOLCD_NAME "PicoLCD (graphic)"
#include <linux/input.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <linux/usb.h>
#include <linux/hid.h>
#include <linux/hid.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include "hid-roccat-common.h"
static inline uint16_t roccat_common_feature_report(uint8_t report_id)
#include <linux/poll.h>
#include <linux/sched.h>
#include <linux/hid-roccat.h>
+#include <linux/module.h>
#define ROCCAT_FIRST_MINOR 0
#define ROCCAT_MAX_DEVICES 8
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/hid.h>
+#include <linux/module.h>
#include "hid-ids.h"
#ifdef CONFIG_SMARTJOYPLUS_FF
#include <linux/input.h>
#include <linux/slab.h>
#include <linux/usb.h>
+#include <linux/module.h>
#include "hid-ids.h"
#include <linux/input.h>
#include <linux/slab.h>
#include <linux/usb.h>
+#include <linux/module.h>
#include "hid-ids.h"
*/
#include <linux/hid.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include "../hid-ids.h"
config SENSORS_EXYNOS4_TMU
tristate "Temperature sensor on Samsung EXYNOS4"
- depends on EXYNOS4_DEV_TMU
+ depends on ARCH_EXYNOS4
help
If you say yes here you get support for TMU (Thermal Managment
Unit) on SAMSUNG EXYNOS4 series of SoC.
#ifdef CONFIG_SMP
#define TO_PHYS_ID(cpu) cpu_data(cpu).phys_proc_id
#define TO_CORE_ID(cpu) cpu_data(cpu).cpu_core_id
-#define TO_ATTR_NO(cpu) (TO_CORE_ID(cpu) + BASE_SYSFS_ATTR_NO)
#define for_each_sibling(i, cpu) for_each_cpu(i, cpu_sibling_mask(cpu))
#else
#define TO_PHYS_ID(cpu) (cpu)
#define TO_CORE_ID(cpu) (cpu)
-#define TO_ATTR_NO(cpu) (cpu)
#define for_each_sibling(i, cpu) for (i = 0; false; )
#endif
+#define TO_ATTR_NO(cpu) (TO_CORE_ID(cpu) + BASE_SYSFS_ATTR_NO)
/*
* Per-Core Temperature Data
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/io.h>
#include <linux/hwmon.h>
diode = 0x70;
}
for (i = 0; i < 3; i++) {
- const char *label = data->temp_label[data->temp_src[i]];
+ const char *label = NULL;
+
+ if (data->temp_label)
+ label = data->temp_label[data->temp_src[i]];
/* Digital source overrides analog type */
- if (strncmp(label, "PECI", 4) == 0)
+ if (label && strncmp(label, "PECI", 4) == 0)
data->temp_type[i] = 6;
- else if (strncmp(label, "AMD", 3) == 0)
+ else if (label && strncmp(label, "AMD", 3) == 0)
data->temp_type[i] = 5;
else if ((tmp & (0x02 << i)))
data->temp_type[i] = (diode & (0x10 << i)) ? 1 : 3;
* General Public License for more details.
*/
+#include <linux/module.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/pm_runtime.h>
return -ENODEV;
io_base = ioremap(res->start, resource_size(res));
- if (!io_base) {
- ret = -ENOMEM;
- goto free_state;
- }
+ if (!io_base)
+ return -ENOMEM;
/* make sure protocol 1 is selected */
val = readl(io_base + HSEM_CTRL_REG);
* It does not support slave mode, the register slightly moved. This PCI
* device provides three bars, every contains a single I2C controller.
*/
+#include <linux/module.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/io.h>
+#include <linux/module.h>
#include <asm/clock.h>
#include <asm/i2c-sh7760.h>
#include <linux/slab.h>
#include <linux/i2c-tegra.h>
#include <linux/of_i2c.h>
+#include <linux/module.h>
#include <asm/unaligned.h>
#include <linux/kernel.h>
#include <linux/i2c.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <linux/rwsem.h>
#include "i2c-core.h"
#include <linux/zorro.h>
#include <linux/ide.h>
#include <linux/init.h>
+#include <linux/module.h>
#include <asm/amigahw.h>
#include <asm/amigaints.h>
#include <linux/delay.h>
#include <linux/ide.h>
#include <linux/init.h>
+#include <linux/module.h>
#include <asm/io.h>
/*
* Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@altavista.net), Maintainer
* Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>, Integrator
- * Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz
+ * Copyright (C) 2007-2011 Bartlomiej Zolnierkiewicz
*
* CYPRESS CY82C693 chipset IDE controller
*
u8 time_16, time_8;
/* select primary or secondary channel */
- if (hwif->index > 0) { /* drive is on the secondary channel */
+ if (drive->dn > 1) { /* drive is on the secondary channel */
dev = pci_get_slot(dev->bus, dev->devfn+1);
if (!dev) {
printk(KERN_ERR "%s: tune_drive: "
pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, time_16);
pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, time_8);
}
- if (hwif->index > 0)
+ if (drive->dn > 1)
pci_dev_put(dev);
}
if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) {
d.init_dma = icside_dma_init;
d.port_ops = &icside_v6_port_ops;
+ } else
d.dma_ops = NULL;
- }
ret = ide_host_register(host, &d, hws);
if (ret)
#include <linux/ide.h>
#include <linux/pci.h>
#include <linux/dmi.h>
+#include <linux/module.h>
#include <acpi/acpi_bus.h>
#include <linux/kernel.h>
#include <linux/cdrom.h>
#include <linux/delay.h>
+#include <linux/export.h>
#include <linux/ide.h>
#include <linux/scatterlist.h>
#include <linux/gfp.h>
/* For SCSI -> ATAPI command conversion */
#include <scsi/scsi.h>
-#include <linux/irq.h>
#include <linux/io.h>
#include <asm/byteorder.h>
#include <linux/uaccess.h>
#include <linux/kernel.h>
#include <linux/ide.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <linux/seq_file.h>
#include "ide-disk.h"
#include <linux/types.h>
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/ide.h>
#include <linux/scatterlist.h>
#include <linux/dma-mapping.h>
#include <linux/types.h>
#include <linux/gfp.h>
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/ide.h>
#include <linux/scatterlist.h>
#include <linux/dma-mapping.h>
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/ide.h>
#include <linux/delay.h>
#include <scsi/scsi_ioctl.h>
#include <asm/byteorder.h>
-#include <linux/irq.h>
#include <linux/uaccess.h>
#include <linux/io.h>
#include <asm/unaligned.h>
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/ide.h>
#include <linux/seq_file.h>
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/ide.h>
#if defined(CONFIG_ARM) || defined(CONFIG_M68K) || defined(CONFIG_MIPS) || \
* IDE ioctls handling.
*/
+#include <linux/export.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/slab.h>
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/ide.h>
static void ide_legacy_init_one(struct ide_hw **hws, struct ide_hw *hw,
#include <linux/types.h>
#include <linux/string.h>
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/interrupt.h>
#include <linux/ide.h>
#include <linux/bitops.h>
#include <linux/init.h>
#include <linux/pnp.h>
#include <linux/ide.h>
+#include <linux/module.h>
#define DRV_NAME "ide-pnp"
#include <scsi/scsi.h>
#include <asm/byteorder.h>
-#include <linux/irq.h>
#include <linux/uaccess.h>
#include <linux/io.h>
#include <asm/unaligned.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/interrupt.h>
#include <linux/ide.h>
#include <linux/bitops.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/ide.h>
+#include <linux/module.h>
#include <asm/macintosh.h>
#include <asm/macints.h>
.udma_mask = udma, \
}
-#define DECLARE_ICH_DEV(udma) \
+#define DECLARE_ICH_DEV(mwdma, udma) \
{ \
.name = DRV_NAME, \
.init_chipset = init_chipset_ich, \
.port_ops = &ich_port_ops, \
.pio_mask = ATA_PIO4, \
.swdma_mask = ATA_SWDMA2_ONLY, \
- .mwdma_mask = ATA_MWDMA12_ONLY, \
+ .mwdma_mask = mwdma, \
.udma_mask = udma, \
}
/* 2: PIIX4 */
DECLARE_PIIX_DEV(ATA_UDMA2),
/* 3: ICH0 */
- DECLARE_ICH_DEV(ATA_UDMA2),
+ DECLARE_ICH_DEV(ATA_MWDMA12_ONLY, ATA_UDMA2),
/* 4: ICH */
- DECLARE_ICH_DEV(ATA_UDMA4),
+ DECLARE_ICH_DEV(ATA_MWDMA12_ONLY, ATA_UDMA4),
/* 5: PIIX4 */
DECLARE_PIIX_DEV(ATA_UDMA4),
- /* 6: ICH[2-7]/ICH[2-3]M/C-ICH/ICH5-SATA/ESB2/ICH8M */
- DECLARE_ICH_DEV(ATA_UDMA5),
+ /* 6: ICH[2-6]/ICH[2-3]M/C-ICH/ICH5-SATA/ESB2/ICH8M */
+ DECLARE_ICH_DEV(ATA_MWDMA12_ONLY, ATA_UDMA5),
+ /* 7: ICH7/7-R, no MWDMA1 */
+ DECLARE_ICH_DEV(ATA_MWDMA2_ONLY, ATA_UDMA5),
};
/**
#endif
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB_2), 6 },
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH6_19), 6 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH7_21), 6 },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH7_21), 7 },
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_1), 6 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB2_18), 6 },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB2_18), 7 },
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH8_6), 6 },
{ 0, },
};
#include <linux/delay.h>
#include <linux/ide.h>
#include <linux/notifier.h>
+#include <linux/module.h>
#include <linux/reboot.h>
#include <linux/pci.h>
#include <linux/adb.h>
#include <linux/interrupt.h>
#include <linux/blkdev.h>
#include <linux/ide.h>
+#include <linux/module.h>
#include <asm/ide.h>
#include <linux/types.h>
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/ide.h>
+#include <linux/module.h>
#define DRV_NAME "tc86c001"
};
MODULE_DEVICE_TABLE(pci, triflex_pci_tbl);
+#ifdef CONFIG_PM
+static int triflex_ide_pci_suspend(struct pci_dev *dev, pm_message_t state)
+{
+ /*
+ * We must not disable or powerdown the device.
+ * APM bios refuses to suspend if IDE is not accessible.
+ */
+ pci_save_state(dev);
+ return 0;
+}
+#else
+#define triflex_ide_pci_suspend NULL
+#endif
+
static struct pci_driver triflex_pci_driver = {
.name = "TRIFLEX_IDE",
.id_table = triflex_pci_tbl,
.probe = triflex_init_one,
.remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
+ .suspend = triflex_ide_pci_suspend,
.resume = ide_pci_resume,
};
#include <linux/sched.h>
#include <linux/notifier.h>
#include <linux/cpu.h>
+#include <linux/module.h>
#include <asm/mwait.h>
#include <asm/msr.h>
static unsigned int lapic_timer_reliable_states = (1 << 1); /* Default to only C1 */
static struct cpuidle_device __percpu *intel_idle_cpuidle_devices;
-static int intel_idle(struct cpuidle_device *dev, struct cpuidle_state *state);
+static int intel_idle(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv, int index);
static struct cpuidle_state *cpuidle_state_table;
{ /* MWAIT C1 */
.name = "C1-NHM",
.desc = "MWAIT 0x00",
- .driver_data = (void *) 0x00,
.flags = CPUIDLE_FLAG_TIME_VALID,
.exit_latency = 3,
.target_residency = 6,
{ /* MWAIT C2 */
.name = "C3-NHM",
.desc = "MWAIT 0x10",
- .driver_data = (void *) 0x10,
.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 20,
.target_residency = 80,
{ /* MWAIT C3 */
.name = "C6-NHM",
.desc = "MWAIT 0x20",
- .driver_data = (void *) 0x20,
.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 200,
.target_residency = 800,
{ /* MWAIT C1 */
.name = "C1-SNB",
.desc = "MWAIT 0x00",
- .driver_data = (void *) 0x00,
.flags = CPUIDLE_FLAG_TIME_VALID,
.exit_latency = 1,
.target_residency = 1,
{ /* MWAIT C2 */
.name = "C3-SNB",
.desc = "MWAIT 0x10",
- .driver_data = (void *) 0x10,
.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 80,
.target_residency = 211,
{ /* MWAIT C3 */
.name = "C6-SNB",
.desc = "MWAIT 0x20",
- .driver_data = (void *) 0x20,
.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 104,
.target_residency = 345,
{ /* MWAIT C4 */
.name = "C7-SNB",
.desc = "MWAIT 0x30",
- .driver_data = (void *) 0x30,
.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 109,
.target_residency = 345,
{ /* MWAIT C1 */
.name = "C1-ATM",
.desc = "MWAIT 0x00",
- .driver_data = (void *) 0x00,
.flags = CPUIDLE_FLAG_TIME_VALID,
.exit_latency = 1,
.target_residency = 4,
{ /* MWAIT C2 */
.name = "C2-ATM",
.desc = "MWAIT 0x10",
- .driver_data = (void *) 0x10,
.flags = CPUIDLE_FLAG_TIME_VALID,
.exit_latency = 20,
.target_residency = 80,
{ /* MWAIT C4 */
.name = "C4-ATM",
.desc = "MWAIT 0x30",
- .driver_data = (void *) 0x30,
.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 100,
.target_residency = 400,
{ /* MWAIT C6 */
.name = "C6-ATM",
.desc = "MWAIT 0x52",
- .driver_data = (void *) 0x52,
.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 140,
.target_residency = 560,
.enter = &intel_idle },
};
+static int get_driver_data(int cstate)
+{
+ int driver_data;
+ switch (cstate) {
+
+ case 1: /* MWAIT C1 */
+ driver_data = 0x00;
+ break;
+ case 2: /* MWAIT C2 */
+ driver_data = 0x10;
+ break;
+ case 3: /* MWAIT C3 */
+ driver_data = 0x20;
+ break;
+ case 4: /* MWAIT C4 */
+ driver_data = 0x30;
+ break;
+ case 5: /* MWAIT C5 */
+ driver_data = 0x40;
+ break;
+ case 6: /* MWAIT C6 */
+ driver_data = 0x52;
+ break;
+ default:
+ driver_data = 0x00;
+ }
+ return driver_data;
+}
+
/**
* intel_idle
* @dev: cpuidle_device
- * @state: cpuidle state
+ * @drv: cpuidle driver
+ * @index: index of cpuidle state
*
*/
-static int intel_idle(struct cpuidle_device *dev, struct cpuidle_state *state)
+static int intel_idle(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv, int index)
{
unsigned long ecx = 1; /* break on interrupt flag */
- unsigned long eax = (unsigned long)cpuidle_get_statedata(state);
+ struct cpuidle_state *state = &drv->states[index];
+ struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
+ unsigned long eax = (unsigned long)cpuidle_get_statedata(state_usage);
unsigned int cstate;
ktime_t kt_before, kt_after;
s64 usec_delta;
if (!(lapic_timer_reliable_states & (1 << (cstate))))
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu);
- return usec_delta;
+ /* Update cpuidle counters */
+ dev->last_residency = (int)usec_delta;
+
+ return index;
}
static void __setup_broadcast_timer(void *arg)
free_percpu(intel_idle_cpuidle_devices);
return;
}
+/*
+ * intel_idle_cpuidle_driver_init()
+ * allocate, initialize cpuidle_states
+ */
+static int intel_idle_cpuidle_driver_init(void)
+{
+ int cstate;
+ struct cpuidle_driver *drv = &intel_idle_driver;
+
+ drv->state_count = 1;
+
+ for (cstate = 1; cstate < MWAIT_MAX_NUM_CSTATES; ++cstate) {
+ int num_substates;
+
+ if (cstate > max_cstate) {
+ printk(PREFIX "max_cstate %d reached\n",
+ max_cstate);
+ break;
+ }
+
+ /* does the state exist in CPUID.MWAIT? */
+ num_substates = (mwait_substates >> ((cstate) * 4))
+ & MWAIT_SUBSTATE_MASK;
+ if (num_substates == 0)
+ continue;
+ /* is the state not enabled? */
+ if (cpuidle_state_table[cstate].enter == NULL) {
+ /* does the driver not know about the state? */
+ if (*cpuidle_state_table[cstate].name == '\0')
+ pr_debug(PREFIX "unaware of model 0x%x"
+ " MWAIT %d please"
+ " contact lenb@kernel.org",
+ boot_cpu_data.x86_model, cstate);
+ continue;
+ }
+
+ if ((cstate > 2) &&
+ !boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
+ mark_tsc_unstable("TSC halts in idle"
+ " states deeper than C2");
+
+ drv->states[drv->state_count] = /* structure copy */
+ cpuidle_state_table[cstate];
+
+ drv->state_count += 1;
+ }
+
+ if (auto_demotion_disable_flags)
+ smp_call_function(auto_demotion_disable, NULL, 1);
+
+ return 0;
+}
+
+
/*
* intel_idle_cpuidle_devices_init()
* allocate, initialize, register cpuidle_devices
continue;
/* is the state not enabled? */
if (cpuidle_state_table[cstate].enter == NULL) {
- /* does the driver not know about the state? */
- if (*cpuidle_state_table[cstate].name == '\0')
- pr_debug(PREFIX "unaware of model 0x%x"
- " MWAIT %d please"
- " contact lenb@kernel.org",
- boot_cpu_data.x86_model, cstate);
continue;
}
- if ((cstate > 2) &&
- !boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
- mark_tsc_unstable("TSC halts in idle"
- " states deeper than C2");
-
- dev->states[dev->state_count] = /* structure copy */
- cpuidle_state_table[cstate];
+ dev->states_usage[dev->state_count].driver_data =
+ (void *)get_driver_data(cstate);
dev->state_count += 1;
}
return -EIO;
}
}
- if (auto_demotion_disable_flags)
- smp_call_function(auto_demotion_disable, NULL, 1);
return 0;
}
if (retval)
return retval;
+ intel_idle_cpuidle_driver_init();
retval = cpuidle_register_driver(&intel_idle_driver);
if (retval) {
printk(KERN_DEBUG PREFIX "intel_idle yielding to %s",
#include <linux/inetdevice.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
+#include <linux/module.h>
#include <net/arp.h>
#include <net/neighbour.h>
#include <net/route.h>
#include <linux/completion.h>
#include <linux/dma-mapping.h>
#include <linux/device.h>
+#include <linux/module.h>
#include <linux/err.h>
#include <linux/idr.h>
#include <linux/interrupt.h>
#include <linux/idr.h>
#include <linux/inetdevice.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <net/tcp.h>
#include <net/ipv6.h>
#include <linux/errno.h>
#include <linux/spinlock.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <linux/jhash.h>
#include <linux/kthread.h>
#include <linux/workqueue.h>
#include <linux/completion.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <rdma/iw_cm.h>
#include <rdma/ib_addr.h>
*/
#include <linux/dma-mapping.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <rdma/ib_cache.h>
#include "mad_priv.h"
#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/interrupt.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <linux/bitops.h>
#include <linux/random.h>
#define pr_fmt(fmt) "%s:%s: " fmt, KBUILD_MODNAME, __func__
+#include <linux/export.h>
#include <net/netlink.h>
#include <net/net_namespace.h>
#include <net/sock.h>
* SOFTWARE.
*/
+#include <linux/export.h>
#include <linux/string.h>
#include <rdma/ib_pack.h>
#include "core_priv.h"
#include <linux/slab.h>
+#include <linux/stat.h>
#include <linux/string.h>
#include <rdma/ib_mad.h>
#include <linux/miscdevice.h>
#include <linux/slab.h>
#include <linux/sysctl.h>
+#include <linux/module.h>
#include <rdma/rdma_user_cm.h>
#include <rdma/ib_marshall.h>
#include <linux/errno.h>
#include <linux/string.h>
+#include <linux/export.h>
#include <linux/if_ether.h>
#include <rdma/ib_pack.h>
#include <linux/mm.h>
#include <linux/dma-mapping.h>
#include <linux/sched.h>
+#include <linux/export.h>
#include <linux/hugetlb.h>
#include <linux/dma-attrs.h>
#include <linux/slab.h>
* SOFTWARE.
*/
+#include <linux/export.h>
#include <rdma/ib_marshall.h>
void ib_copy_ah_attr_to_user(struct ib_uverbs_ah_attr *dst,
#include <linux/errno.h>
#include <linux/err.h>
+#include <linux/export.h>
#include <linux/string.h>
#include <linux/slab.h>
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
+
+#include <linux/module.h>
+
#include "iw_cxgb4.h"
static int ocqp_support = 1;
#include <linux/pci.h>
#include <linux/vmalloc.h>
#include <linux/fs.h>
+#include <linux/export.h>
#include <asm/uaccess.h>
#include "ipath_kernel.h"
#include <linux/vmalloc.h>
#include <linux/bitmap.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include "ipath_kernel.h"
#include "ipath_verbs.h"
#include <linux/poll.h>
#include <linux/cdev.h>
#include <linux/swap.h>
+#include <linux/export.h>
#include <linux/vmalloc.h>
#include <linux/slab.h>
#include <linux/highmem.h>
#include <linux/pci.h>
#include <linux/netdevice.h>
+#include <linux/moduleparam.h>
#include <linux/slab.h>
#include <linux/stat.h>
#include <linux/vmalloc.h>
*/
#include <linux/ctype.h>
+#include <linux/stat.h>
#include "ipath_kernel.h"
#include "ipath_verbs.h"
#include <rdma/ib_user_verbs.h>
#include <linux/io.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <linux/utsname.h>
#include <linux/rculist.h>
*/
#include <linux/jiffies.h>
+#include <linux/module.h>
#include <linux/timer.h>
#include <linux/workqueue.h>
#include <linux/pci.h>
#include <linux/errno.h>
#include <linux/sched.h>
+#include <linux/module.h>
#include <linux/slab.h>
#include <asm/io.h>
#include <rdma/ib_mad.h>
#include <linux/sched.h>
#include <linux/slab.h>
+#include <linux/stat.h>
#include <linux/mm.h>
+#include <linux/export.h>
#include "mthca_dev.h"
#include "mthca_cmd.h"
#include <linux/pci.h>
#include <linux/poll.h>
#include <linux/vmalloc.h>
+#include <linux/export.h>
#include <linux/fs.h>
#include <linux/uaccess.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/vmalloc.h>
+#include <linux/module.h>
#include "qib.h"
#include <linux/jiffies.h>
#include <asm/pgtable.h>
#include <linux/delay.h>
+#include <linux/export.h>
#include "qib.h"
#include "qib_common.h"
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/delay.h>
+#include <linux/module.h>
#include <linux/io.h>
#include <rdma/ib_verbs.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/jiffies.h>
+#include <linux/module.h>
#include <rdma/ib_verbs.h>
#include <rdma/ib_smi.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/idr.h>
+#include <linux/module.h>
#include "qib.h"
#include "qib_common.h"
#include <linux/delay.h>
#include <linux/vmalloc.h>
#include <linux/aer.h>
+#include <linux/module.h>
#include "qib.h"
#include <linux/pci.h>
#include <linux/delay.h>
+#include <linux/module.h>
#include <linux/firmware.h>
#include "qib.h"
#include <linux/spinlock.h>
#include <linux/netdevice.h>
+#include <linux/moduleparam.h>
#include "qib.h"
#include "qib_common.h"
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/vmalloc.h>
+#include <linux/moduleparam.h>
#include "qib.h"
#include <rdma/ib_mad.h>
#include <rdma/ib_user_verbs.h>
#include <linux/io.h>
+#include <linux/module.h>
#include <linux/utsname.h>
#include <linux/rculist.h>
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
+#include <linux/moduleparam.h>
#include "ipoib.h"
struct file_operations;
#include <linux/debugfs.h>
+#include <linux/export.h>
#include "ipoib.h"
*/
#include <linux/delay.h>
+#include <linux/moduleparam.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/skbuff.h>
#include <linux/rtnetlink.h>
+#include <linux/moduleparam.h>
#include <linux/ip.h>
#include <linux/in.h>
#include <linux/igmp.h>
#include <linux/scatterlist.h>
#include <linux/delay.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <net/sock.h>
* the Free Software Foundation.
*/
+#include <linux/export.h>
#include <asm/uaccess.h>
#include "input-compat.h"
*/
#include <linux/input/mt.h>
+#include <linux/export.h>
#include <linux/slab.h>
#define TRKID_SGN ((TRKID_MAX + 1) >> 1)
#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/workqueue.h>
+#include <linux/module.h>
#include <linux/input-polldev.h>
MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>");
#include <linux/delay.h>
#include <linux/input/as5011.h>
#include <linux/slab.h>
+#include <linux/module.h>
#define DRIVER_DESC "Driver for Austria Microsystems AS5011 joystick"
#define MODULE_DEVICE_ALIAS "as5011"
#include <linux/input.h>
#include <linux/slab.h>
#include <linux/clk.h>
+#include <linux/module.h>
#include <plat/ske.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/input/matrix_keypad.h>
+#include <linux/module.h>
#define BITS(x) (BIT(x) - 1)
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/input/ad714x.h>
+#include <linux/module.h>
#include "ad714x.h"
#define AD714X_PWR_CTRL 0x0
#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/input/adxl34x.h>
+#include <linux/module.h>
#include "adxl34x.h"
#include <linux/usb/input.h>
#include <linux/slab.h>
+#include <linux/module.h>
#define DRIVER_DESC "ATI/Philips USB RF remote driver"
#define DRIVER_VERSION "0.3"
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/input/cma3000.h>
+#include <linux/module.h>
#include "cma3000_d0x.h"
#include <linux/interrupt.h>
#include <linux/i2c/dm355evm_msp.h>
+#include <linux/module.h>
/*
#include <linux/input.h>
#include <linux/input/sparse-keymap.h>
+#include <linux/module.h>
#include <linux/slab.h>
MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>");
#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/spi/ad7877.h>
+#include <linux/module.h>
#include <asm/irq.h>
#define TS_PEN_UP_TIMEOUT msecs_to_jiffies(100)
#include <linux/input.h> /* BUS_SPI */
#include <linux/pm.h>
#include <linux/spi/spi.h>
+#include <linux/module.h>
#include "ad7879.h"
#include <linux/gpio.h>
#include <linux/spi/ad7879.h>
+#include <linux/module.h>
#include "ad7879.h"
#define AD7879_REG_ZEROS 0
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/regulator/consumer.h>
+#include <linux/module.h>
#include <asm/irq.h>
/*
#include <linux/input/bu21013.h>
#include <linux/slab.h>
#include <linux/regulator/consumer.h>
+#include <linux/module.h>
#define PEN_DOWN_INTR 0
#define MAX_FINGERS 2
#include <linux/init.h>
#include <linux/bitmap.h>
#include <linux/debugfs.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
* published by the Free Software Foundation.
*/
+#include <linux/module.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
* published by the Free Software Foundation.
*/
+#include <linux/module.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/init.h>
+#include <linux/export.h>
static char *state2str(unsigned short state)
{
#include "gigaset.h"
#include <linux/crc-ccitt.h>
#include <linux/bitrev.h>
+#include <linux/export.h>
/* check if byte must be stuffed/escaped
* I'm not sure which data should be encoded.
#include <linux/isdn/capilli.h>
#include <linux/isdn/capicmd.h>
#include <linux/isdn/capiutil.h>
+#include <linux/export.h>
/* missing from kernelcapi.h */
#define CapiNcpiNotSupportedByProtocol 0x0001
* =====================================================================
*/
+#include <linux/export.h>
#include "gigaset.h"
void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb)
* =====================================================================
*/
+#include <linux/export.h>
#include "gigaset.h"
/* ========================================================== */
#include "gigaset.h"
#include <linux/isdnif.h>
+#include <linux/export.h>
#define SBUFSIZE 4096 /* sk_buff payload size */
#define TRANSBUFSIZE 768 /* bytes per skb for transparent receive */
#include "gigaset.h"
#include <linux/gigaset_dev.h>
#include <linux/tty_flip.h>
+#include <linux/module.h>
/*** our ioctls ***/
#include <linux/delay.h>
#include <linux/vmalloc.h>
#include <linux/mISDNhw.h>
+#include <linux/module.h>
#include "isar.h"
#define ISAR_REV "2.1"
* supplementary service (CAPI 2.0 part III)
*/
#include <linux/isdn/capicmd.h>
+#include <linux/module.h>
int
isdn_tty_capi_facility(capi_msg *cm) {
#include <linux/stddef.h>
#include <linux/spinlock.h>
#include <linux/mISDNif.h>
+#include <linux/export.h>
#include "core.h"
static u_int *debug;
#include <linux/delay.h>
#include <linux/mISDNif.h>
#include <linux/mISDNdsp.h>
+#include <linux/export.h>
#include "core.h"
#include "dsp.h"
#include <linux/string.h>
#include <linux/mISDNif.h>
#include <linux/mISDNdsp.h>
+#include <linux/export.h>
#include "dsp.h"
#include "dsp_hwec.h"
#include <linux/mISDNif.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include "core.h"
static u_int *debug;
#include <linux/acpi.h>
#include <linux/leds.h>
#include <linux/slab.h>
+#include <linux/module.h>
MODULE_AUTHOR("Louis Davis/Jim Dailey");
MODULE_DESCRIPTION("Dell LED Control Driver");
del_timer_sync(&led_cdev->blink_timer);
if (led_cdev->blink_set &&
- !led_cdev->blink_set(led_cdev, delay_on, delay_off)) {
- led_cdev->blink_delay_on = *delay_on;
- led_cdev->blink_delay_off = *delay_off;
+ !led_cdev->blink_set(led_cdev, delay_on, delay_off))
return;
- }
/* blink with 1 Hz as default if nothing specified */
if (!*delay_on && !*delay_off)
#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/mfd/88pm860x.h>
+#include <linux/module.h>
#define LED_PWM_SHIFT (3)
#define LED_PWM_MASK (0x1F)
#include <linux/mfd/asic3.h>
#include <linux/mfd/core.h>
+#include <linux/module.h>
/*
* The HTC ASIC3 LED GPIOs are inputs, not outputs.
#include <linux/io.h>
#include <linux/atmel_pwm.h>
#include <linux/slab.h>
+#include <linux/module.h>
struct pwmled {
#include <linux/platform_device.h>
#include <linux/spinlock.h>
#include <linux/types.h>
+#include <linux/export.h>
#define LED_WEB 0x04
#define LED_POWER_OFF 0x08
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
+#include <linux/module.h>
#include <mach/hardware.h>
#include <asm/io.h>
#include <linux/of_gpio.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
+#include <linux/module.h>
#include <asm/gpio.h>
#include <linux/led-lm3530.h>
#include <linux/types.h>
#include <linux/regulator/consumer.h>
+#include <linux/module.h>
#define LM3530_LED_DEV "lcd-backlight"
#define LM3530_NAME "lm3530-led"
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/module.h>
#include <linux/device.h>
#include <linux/leds.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/slab.h>
+#include <linux/module.h>
struct lt3593_led_data {
struct led_classdev cdev;
#include <asm/io.h>
#include <linux/nsc_gpio.h>
#include <linux/scx200_gpio.h>
+#include <linux/module.h>
#define DRVNAME "net48xx-led"
#define NET48XX_ERROR_LED_GPIO 20
#include <linux/leds.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/module.h>
#include <asm/geode.h>
#include <linux/slab.h>
#include <linux/gpio.h>
#include <linux/leds.h>
+#include <linux/module.h>
#include <mach/leds-ns2.h>
/*
#include <linux/leds.h>
#include <linux/gpio.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
#include <linux/mfd/wm831x/core.h>
#include <linux/mfd/wm831x/pdata.h>
#include <linux/mfd/wm831x/status.h>
+#include <linux/module.h>
struct wm831x_status {
#include <linux/mfd/wm8350/pmic.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
+#include <linux/module.h>
/* Microamps */
static const int isink_cur[] = {
#include <linux/err.h>
#include <asm/io.h>
#include <linux/scx200_gpio.h>
+#include <linux/module.h>
#define DRVNAME "wrap-led"
#define WRAP_POWER_LED_GPIO 2
#include <linux/interrupt.h>
#include <linux/virtio_ring.h>
#include <linux/err.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <asm/io.h>
#include <asm/paravirt.h>
#include <linux/eventfd.h>
#include <linux/file.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include "lg.h"
/*L:056
err = macii_init_via();
if (err) goto out;
- err = request_irq(IRQ_MAC_ADB, macii_interrupt, IRQ_FLG_LOCK, "ADB",
+ err = request_irq(IRQ_MAC_ADB, macii_interrupt, 0, "ADB",
macii_interrupt);
if (err) goto out;
return err;
}
- if (request_irq(IRQ_MAC_ADB, maciisi_interrupt, IRQ_FLG_LOCK | IRQ_FLG_FAST,
- "ADB", maciisi_interrupt)) {
+ if (request_irq(IRQ_MAC_ADB, maciisi_interrupt, 0, "ADB",
+ maciisi_interrupt)) {
printk(KERN_ERR "maciisi_init: can't get irq %d\n", IRQ_MAC_ADB);
return -EAGAIN;
}
#include <linux/vmalloc.h>
#include <linux/version.h>
#include <linux/shrinker.h>
+#include <linux/module.h>
#define DM_MSG_PREFIX "bufio"
#include <linux/mm.h>
#include <linux/pagemap.h>
#include <linux/vmalloc.h>
+#include <linux/module.h>
#include <linux/slab.h>
#define DM_MSG_PREFIX "snapshot exception stores"
#include <linux/dm-dirty-log.h>
#include <linux/device-mapper.h>
#include <linux/dm-log-userspace.h>
+#include <linux/module.h>
#include "dm-log-userspace-transfer.h"
*/
#include <linux/device-mapper.h>
+#include <linux/module.h>
#include "dm-path-selector.h"
*/
#include <linux/slab.h>
+#include <linux/module.h>
#include "md.h"
#include "raid1.h"
#include "dm-path-selector.h"
#include <linux/slab.h>
+#include <linux/module.h>
#define DM_MSG_PREFIX "multipath round-robin"
#include "dm-path-selector.h"
#include <linux/slab.h>
+#include <linux/module.h>
#define DM_MSG_PREFIX "multipath service-time"
#define ST_MIN_IO 1
#include <linux/mm.h>
#include <linux/pagemap.h>
#include <linux/vmalloc.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <linux/dm-io.h>
#include <linux/mm.h>
#include <linux/pagemap.h>
#include <linux/vmalloc.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <linux/dm-io.h>
#include <linux/slab.h>
#include <linux/kobject.h>
#include <linux/dm-ioctl.h>
+#include <linux/export.h>
#include "dm.h"
#include "dm-uevent.h"
#define MaxFault 50
#include <linux/blkdev.h>
+#include <linux/module.h>
#include <linux/raid/md_u.h>
#include <linux/slab.h>
#include "md.h"
#include <linux/blkdev.h>
#include <linux/raid/md_u.h>
#include <linux/seq_file.h>
+#include <linux/module.h>
#include <linux/slab.h>
#include "md.h"
#include "linear.h"
#include <linux/hdreg.h>
#include <linux/proc_fs.h>
#include <linux/random.h>
+#include <linux/module.h>
#include <linux/reboot.h>
#include <linux/file.h>
#include <linux/compat.h>
*/
#include <linux/blkdev.h>
+#include <linux/module.h>
#include <linux/raid/md_u.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
#include "dm-btree-internal.h"
#include "dm-transaction-manager.h"
-#include <linux/module.h>
+#include <linux/export.h>
/*
* Removing an entry from a btree
#include "dm-space-map.h"
#include "dm-transaction-manager.h"
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/device-mapper.h>
#define DM_MSG_PREFIX "btree"
#include "dm-space-map-checker.h"
#include <linux/device-mapper.h>
+#include <linux/export.h>
#ifdef CONFIG_DM_DEBUG_SPACE_MAPS
#include <linux/list.h>
#include <linux/slab.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/device-mapper.h>
#define DM_MSG_PREFIX "space map disk"
#include "dm-space-map-metadata.h"
#include "dm-persistent-data-internal.h"
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <linux/device-mapper.h>
#include <linux/blkdev.h>
#include <linux/seq_file.h>
+#include <linux/module.h>
#include <linux/slab.h>
#include "md.h"
#include "raid0.h"
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/blkdev.h>
+#include <linux/module.h>
#include <linux/seq_file.h>
#include <linux/ratelimit.h>
#include "md.h"
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/blkdev.h>
+#include <linux/module.h>
#include <linux/seq_file.h>
#include <linux/ratelimit.h>
#include "md.h"
#include <linux/kthread.h>
#include <linux/raid/pq.h>
#include <linux/async_tx.h>
+#include <linux/module.h>
#include <linux/async.h>
#include <linux/seq_file.h>
#include <linux/cpu.h>
struct r5dev *pdev, *qdev;
clear_bit(STRIPE_HANDLE, &sh->state);
- if (test_and_set_bit(STRIPE_ACTIVE, &sh->state)) {
+ if (test_and_set_bit_lock(STRIPE_ACTIVE, &sh->state)) {
/* already being handled, ensure it gets handled
* again when current action finishes */
set_bit(STRIPE_HANDLE, &sh->state);
/* check if the array has lost more than max_degraded devices and,
* if so, some requests might need to be failed.
*/
- if (s.failed > conf->max_degraded && s.to_read+s.to_write+s.written)
- handle_failed_stripe(conf, sh, &s, disks, &s.return_bi);
- if (s.failed > conf->max_degraded && s.syncing)
- handle_failed_sync(conf, sh, &s);
+ if (s.failed > conf->max_degraded) {
+ sh->check_state = 0;
+ sh->reconstruct_state = 0;
+ if (s.to_read+s.to_write+s.written)
+ handle_failed_stripe(conf, sh, &s, disks, &s.return_bi);
+ if (s.syncing)
+ handle_failed_sync(conf, sh, &s);
+ }
/*
* might be able to return some write requests if the parity blocks
return_io(s.return_bi);
- clear_bit(STRIPE_ACTIVE, &sh->state);
+ clear_bit_unlock(STRIPE_ACTIVE, &sh->state);
}
static void raid5_activate_delayed(struct r5conf *conf)
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <media/saa7146.h>
+#include <linux/module.h>
LIST_HEAD(saa7146_devices);
DEFINE_MUTEX(saa7146_devices_lock);
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <media/saa7146_vv.h>
+#include <linux/module.h>
/****************************************************************************/
/* resource management functions, shamelessly stolen from saa7134 driver */
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
+#include <linux/export.h>
#include <media/saa7146_vv.h>
static void calculate_output_format_register(struct saa7146_dev* saa, u32 palette, u32* clip_format)
#include <media/saa7146_vv.h>
#include <media/v4l2-chip-ident.h>
+#include <linux/module.h>
static int max_memory = 32;
*/
#include <linux/i2c.h>
+#include <linux/module.h>
#include <media/tuner.h>
#include <media/tuner-types.h>
u8 i2c_r_data[24];
u8 i = 0;
u8 fifo_status = 0;
- int ret;
int status = 0;
mxl_i2c("read %d bytes", count);
i2c_w_data[4+(i*3)] = 0x00;
}
- ret = mxl111sf_i2c_get_data(state, 0, i2c_w_data, i2c_r_data);
+ mxl111sf_i2c_get_data(state, 0, i2c_w_data, i2c_r_data);
/* Check for I2C NACK status */
if (mxl111sf_i2c_check_status(state) == 1) {
goto fail;
ret = mxl111sf_write_reg(state, 0x00, 0x00);
- if (mxl_fail(ret))
- goto fail;
+ mxl_fail(ret);
fail:
return ret;
}
/* set hysteresis value reg: 0x0B<5:0> */
ret = mxl111sf_write_reg(state, V6_IDAC_HYSTERESIS_REG,
(hysteresis_value & 0x3F));
+ mxl_fail(ret);
}
ret = mxl111sf_write_reg(state, V6_IDAC_SETTINGS_REG, val);
+ mxl_fail(ret);
- return val;
+ return ret;
}
/*
#include <linux/i2c.h>
#include <linux/mutex.h>
+#include <linux/module.h>
#include "dibx000_common.h"
#include "sms-cards.h"
#include "smsir.h"
+#include <linux/module.h>
static int sms_dbg;
module_param_named(cards_dbg, sms_dbg, int, 0644);
****************************************************************/
+#include <linux/export.h>
#include <asm/byteorder.h>
#include "smsendian.h"
#include <linux/mmc/card.h>
#include <linux/mmc/sdio_func.h>
#include <linux/mmc/sdio_ids.h>
+#include <linux/module.h>
#include "smscoreapi.h"
#include "sms-cards.h"
#include <linux/usb.h>
#include <linux/firmware.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include "smscoreapi.h"
#include "sms-cards.h"
#include <linux/types.h>
#include <linux/ioctl.h>
#include <linux/media.h>
+#include <linux/export.h>
#include <media/media-device.h>
#include <media/media-devnode.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/i2c.h>
+#include <linux/module.h>
#include <media/timb_radio.h>
#define DRIVER_NAME "timb-radio"
#include <linux/interrupt.h>
#include <linux/mfd/wl1273-core.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <linux/slab.h>
#include <linux/gpio.h>
#include <linux/regulator/consumer.h>
+#include <linux/module.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ioctl.h>
#include <media/v4l2-common.h>
*
*/
+#include <linux/export.h>
+
#include "fmdrv.h"
#include "fmdrv_v4l2.h"
#include "fmdrv_common.h"
*/
#include <linux/bitrev.h>
+#include <linux/module.h>
#include "rc-core-priv.h"
#define JVC_NBITS 16 /* dev(8) + func(8) */
#include <linux/sched.h>
#include <linux/wait.h>
+#include <linux/module.h>
#include <media/lirc.h>
#include <media/lirc_dev.h>
#include <media/rc-core.h>
*/
#include <linux/bitrev.h>
+#include <linux/module.h>
#include "rc-core-priv.h"
#define NEC_NBITS 32
* GNU General Public License for more details.
*/
+#include <linux/export.h>
#include <linux/kthread.h>
#include <linux/mutex.h>
+#include <linux/kmod.h>
#include <linux/sched.h>
#include <linux/freezer.h>
#include "rc-core-priv.h"
*/
#include "rc-core-priv.h"
+#include <linux/module.h>
#define RC5_NBITS 14
#define RC5X_NBITS 20
*/
#include "rc-core-priv.h"
+#include <linux/module.h>
#define RC5_SZ_NBITS 15
#define RC5_UNIT 888888 /* ns */
*/
#include "rc-core-priv.h"
+#include <linux/module.h>
/*
* This decoder currently supports:
*/
#include <linux/bitrev.h>
+#include <linux/module.h>
#include "rc-core-priv.h"
#define SONY_UNIT 600000 /* ns */
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* ADS Tech Instant TV DVB-T PCI Remote */
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* A-Link DTU(m) slim remote, 6 rows, 3 columns. */
static struct rc_map_table alink_dtu_m[] = {
*/
#include <media/rc-map.h>
+#include <linux/module.h>
static struct rc_map_table anysee[] = {
{ 0x0800, KEY_0 },
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* Attila Kondoros <attila.kondoros@chello.hu> */
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/*
* Marc Fargas <telenieko@telenieko.com>
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* ATI TV Wonder HD 600 USB
Devin Heitmueller <devin.heitmueller@gmail.com>
*/
#include <media/rc-map.h>
+#include <linux/module.h>
static struct rc_map_table avermedia_a16d[] = {
{ 0x20, KEY_LIST},
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* Oldrich Jedlicka <oldium.pro@seznam.cz> */
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* Matt Jesson <dvb@jesson.eclipse.co.uk */
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/*
* Avermedia M135A with RM-JX and RM-K6 remote controls
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/*
* Avermedia M733A with IR model RM-K6
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* Initial keytable is from Jose Alberto Reguero <jareguero@telefonica.net>
and Felipe Morales Moreno <felipe.morales.moreno@gmail.com> */
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* Alex Hermann <gaaf@gmx.net> */
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* AVERTV STUDIO 303 Remote */
*/
#include <media/rc-map.h>
+#include <linux/module.h>
static struct rc_map_table azurewave_ad_tu700[] = {
{ 0x0000, KEY_TAB }, /* Tab */
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* Beholder Intl. Ltd. 2008
* Dmitry Belimov d.belimov@google.com
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/*
* Igor Kuznetsov <igk72@ya.ru>
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/*
* From reading the following remotes:
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* Cinergy 1400 DVB-T */
*/
#include <media/rc-map.h>
+#include <linux/module.h>
static struct rc_map_table cinergy[] = {
{ 0x00, KEY_0 },
*/
#include <media/rc-map.h>
+#include <linux/module.h>
static struct rc_map_table dib0700_nec_table[] = {
/* Key codes for the Pixelview SBTVD remote */
*/
#include <media/rc-map.h>
+#include <linux/module.h>
static struct rc_map_table dib0700_rc5_table[] = {
/* Key codes for the tiny Pinnacle remote*/
*/
#include <media/rc-map.h>
+#include <linux/module.h>
static struct rc_map_table digitalnow_tinytwin[] = {
{ 0x0000, KEY_MUTE }, /* [symbol speaker] */
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* Digittrade DVB-T USB Stick remote controller. */
/* Imported from af9015.h.
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* DVBWorld remotes
Igor M. Liplianin <liplianin@me.by>
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* DigitalNow DNTV Live DVB-T Remote */
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* DigitalNow DNTV Live! DVB-T Pro Remote */
*/
#include <media/rc-map.h>
+#include <linux/module.h>
static struct rc_map_table em_terratec[] = {
{ 0x01, KEY_CHANNEL },
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* Encore ENLTV-FM v5.3
Mauro Carvalho Chehab <mchehab@infradead.org>
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* Encore ENLTV-FM - black plastic, white front cover with white glowing buttons
Juan Pablo Sormani <sorman@gmail.com> */
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* Encore ENLTV2-FM - silver plastic - "Wand Media" written at the botton
Mauro Carvalho Chehab <mchehab@infradead.org> */
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* EVGA inDtube
Devin Heitmueller <devin.heitmueller@gmail.com>
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* Alfons Geser <a.geser@cox.net>
* updates from Job D. R. Borges <jobdrb@ig.com.br> */
*/
#include <media/rc-map.h>
+#include <linux/module.h>
static struct rc_map_table flydvb[] = {
{ 0x01, KEY_ZOOM }, /* Full Screen */
*/
#include <media/rc-map.h>
+#include <linux/module.h>
static struct rc_map_table flyvideo[] = {
{ 0x0f, KEY_0 },
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* DViCO FUSION HDTV MCE remote */
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* GADMEI UTV330+ RM008Z remote
Shine Liu <shinel@foxmail.com>
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/*
* Remote control for the Genius TVGO A11MCE
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* Mike Baikov <mike@baikov.com> */
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/*
* Hauppauge:the newer, gray remotes (seems there are multiple
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* mce-mode imon mce remote key table */
static struct rc_map_table imon_mce[] = {
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/*
* standard imon remote key table, which isn't really entirely
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* IO-DATA BCTV7E Remote */
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* Kaiomy TVnPC U2
Mauro Carvalho Chehab <mchehab@infradead.org>
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* Kworld 315U
*/
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* Kworld Plus TV Analog Lite PCI IR
Mauro Carvalho Chehab <mchehab@infradead.org>
*/
#include <media/rc-map.h>
+#include <linux/module.h>
static struct rc_map_table leadtek_y04g0051[] = {
{ 0x0300, KEY_POWER2 },
*/
#include <media/rc-core.h>
+#include <linux/module.h>
static struct rc_map_table lirc[] = {
{ },
*/
#include <media/rc-map.h>
+#include <linux/module.h>
static struct rc_map_table lme2510_rc[] = {
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* Michael Tokarev <mjt@tls.msk.ru>
keytable is used by MANLI MTV00[0x0c] and BeholdTV 40[13] at
*/
#include <media/rc-map.h>
+#include <linux/module.h>
static struct rc_map_table msi_digivox_ii[] = {
{ 0x0002, KEY_2 },
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* MSI DIGIVOX mini III */
/* Uses NEC extended 0x61d6. */
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/*
Keycodes for remote on the MSI TV@nywhere Plus. The controller IC on the card
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* MSI TV@nywhere MASTER remote */
*/
#include <media/rc-map.h>
+#include <linux/module.h>
static struct rc_map_table nebula[] = {
{ 0x00, KEY_0 },
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* Terratec Cinergy Hybrid T USB XS FM
Mauro Carvalho Chehab <mchehab@redhat.com>
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* Norwood Micro (non-Pro) TV Tuner
By Peter Naulls <peter@chocky.org>
*/
#include <media/rc-map.h>
+#include <linux/module.h>
static struct rc_map_table npgtech[] = {
{ 0x1d, KEY_SWITCHVIDEOMODE }, /* switch inputs */
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* Mapping for the 28 key remote control as seen at
http://www.sednacomputer.com/photo/cardbus-tv.jpg
*/
#include <media/rc-map.h>
+#include <linux/module.h>
static struct rc_map_table pinnacle_color[] = {
{ 0x59, KEY_MUTE },
*/
#include <media/rc-map.h>
+#include <linux/module.h>
static struct rc_map_table pinnacle_grey[] = {
{ 0x3a, KEY_0 },
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* Pinnacle PCTV HD 800i mini remote */
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/*
* Keytable for 002-T IR remote provided together with Pixelview
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/*
* Keytable for MK-F12 IR remote provided together with Pixelview
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/*
Mauro Carvalho Chehab <mchehab@infradead.org>
*/
#include <media/rc-map.h>
+#include <linux/module.h>
static struct rc_map_table pixelview[] = {
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/*
* Remote control for Powercolor Real Angel 330
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* Michal Majchrowicz <mmajchrowicz@gmail.com> */
*/
#include <media/rc-map.h>
+#include <linux/module.h>
static struct rc_map_table purpletv[] = {
{ 0x03, KEY_POWER },
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* Mark Phalan <phalanm@o2.ie> */
*/
#include <media/rc-map.h>
+#include <linux/module.h>
static struct rc_map_table rc6_mce[] = {
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* Zogis Real Audio 220 - 32 keys IR */
*/
#include <media/rc-map.h>
+#include <linux/module.h>
static struct rc_map_table streamzap[] = {
/*
*/
#include <media/rc-map.h>
+#include <linux/module.h>
static struct rc_map_table tbs_nec[] = {
{ 0x84, KEY_POWER2}, /* power */
*/
#include <media/rc-map.h>
+#include <linux/module.h>
static struct rc_map_table technisat_usb2[] = {
{0x0a0c, KEY_POWER},
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* Terratec Cinergy Hybrid T USB XS
Devin Heitmueller <dheitmueller@linuxtv.org>
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/*
* TerraTec slim remote, 6 rows, 3 columns.
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* TerraTec slim remote, 7 rows, 4 columns. */
/* Uses NEC extended 0x02bd. */
*/
#include <media/rc-map.h>
+#include <linux/module.h>
static struct rc_map_table tevii_nec[] = {
{ 0x0a, KEY_POWER2},
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/*
* Initial mapping is for the TiVo remote included in the Nero LiquidTV bundle,
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* Uses NEC extended 0x02bd */
static struct rc_map_table total_media_in_hand[] = {
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* TrekStor DVB-T USB Stick remote controller. */
/* Imported from af9015.h.
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* for the Technotrend 1500 bundled remotes (grey and black): */
#include <media/rc-map.h>
+#include <linux/module.h>
static struct rc_map_table twinhan_vp1027[] = {
{ 0x16, KEY_POWER2 },
*/
#include <media/rc-map.h>
+#include <linux/module.h>
static struct rc_map_table videomate_m1f[] = {
{ 0x01, KEY_POWER },
*/
#include <media/rc-map.h>
+#include <linux/module.h>
static struct rc_map_table videomate_s350[] = {
{ 0x00, KEY_TV},
*/
#include <media/rc-map.h>
+#include <linux/module.h>
static struct rc_map_table videomate_tv_pvr[] = {
{ 0x14, KEY_MUTE },
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* Leadtek Winfast TV USB II Deluxe remote
Magnus Alm <magnus.alm@gmail.com>
*/
#include <media/rc-map.h>
+#include <linux/module.h>
/* Table for Leadtek Winfast Remote Controls - used by both bttv and cx88 */
#include <linux/input.h>
#include <linux/slab.h>
#include <linux/device.h>
+#include <linux/module.h>
#include "rc-core-priv.h"
/* Sizes are in bytes, 256 bytes allows for 32 entries on x64 */
*/
#include <linux/delay.h>
+#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/videodev2.h>
+#include <linux/module.h>
#include <media/ak881x.h>
#include <media/v4l2-chip-ident.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/usb.h>
+#include <linux/module.h>
#include "cpia2.h"
#include <linux/slab.h>
#include <linux/kfifo.h>
+#include <linux/module.h>
#include <media/cx25840.h>
#include <media/rc-core.h>
#include <linux/videodev2.h>
#include <linux/clk.h>
#include <linux/err.h>
+#include <linux/module.h>
#include <media/davinci/dm355_ccdc.h>
#include <media/davinci/vpss.h>
#include <linux/gfp.h>
#include <linux/clk.h>
#include <linux/err.h>
+#include <linux/module.h>
#include <media/davinci/dm644x_ccdc.h>
#include <media/davinci/vpss.h>
#include <linux/i2c.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include "hdpvr.h"
#define DEBUG_VARIABLE debug
#include <media/saa7146_vv.h>
+#include <linux/module.h>
static int debug;
module_param(debug, int, 0);
#define DEBUG_VARIABLE debug
#include <media/saa7146_vv.h>
+#include <linux/module.h>
static int debug;
module_param(debug, int, 0);
#include <linux/v4l2-mediabus.h>
#include <linux/slab.h>
#include <linux/videodev2.h>
+#include <linux/module.h>
#include <media/soc_camera.h>
#include <media/v4l2-subdev.h>
#include <linux/gpio.h>
#include <linux/regulator/consumer.h>
#include <linux/videodev2.h>
+#include <linux/module.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <media/v4l2-subdev.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/log2.h>
+#include <linux/module.h>
#include <media/soc_camera.h>
#include <media/soc_mediabus.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/v4l2-mediabus.h>
+#include <linux/module.h>
#include <media/soc_camera.h>
#include <media/v4l2-common.h>
#include <linux/slab.h>
#include <linux/v4l2-mediabus.h>
#include <linux/videodev2.h>
+#include <linux/module.h>
#include <media/soc_camera.h>
#include <media/v4l2-chip-ident.h>
#include <linux/slab.h>
#include <linux/videodev2.h>
#include <linux/delay.h>
+#include <linux/module.h>
#include <asm/div64.h>
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
#include <linux/i2c.h>
#include <linux/delay.h>
#include <linux/log2.h>
+#include <linux/module.h>
#include <media/soc_camera.h>
#include <media/soc_mediabus.h>
#include <linux/slab.h>
#include <linux/videodev2.h>
#include <linux/v4l2-mediabus.h>
+#include <linux/module.h>
#include <media/mt9v032.h>
#include <media/v4l2-ctrls.h>
#include <media/tuner.h>
#include <media/v4l2-common.h>
#include <media/saa7115.h>
+#include <linux/module.h>
#include "mxb.h"
#include "tea6415c.h"
#include <media/noon010pc30.h>
#include <media/v4l2-chip-ident.h>
#include <linux/videodev2.h>
+#include <linux/module.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <media/v4l2-mediabus.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/sched.h>
+#include <linux/module.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/v4l2-mediabus.h>
+#include <linux/module.h>
#include <media/soc_camera.h>
#include <media/v4l2-chip-ident.h>
#include "pvrusb2-devattr.h"
#include <linux/usb.h>
+#include <linux/module.h>
/* This is needed in order to pull in tuner type ids... */
#include <linux/i2c.h>
#include <media/tuner.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <linux/firmware.h>
#include <linux/videodev2.h>
#include <media/v4l2-common.h>
*/
#include <linux/i2c.h>
+#include <linux/module.h>
#include <media/ir-kbd-i2c.h>
#include "pvrusb2-i2c-core.h"
#include "pvrusb2-hdw-internal.h"
#include "pvrusb2-v4l2.h"
#include "pvrusb2-ioread.h"
#include <linux/videodev2.h>
+#include <linux/module.h>
#include <media/v4l2-dev.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
#include <linux/slab.h>
#include <linux/v4l2-mediabus.h>
#include <linux/videodev2.h>
+#include <linux/module.h>
#include <media/rj54n1cb0c.h>
#include <media/soc_camera.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/media.h>
+#include <linux/module.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
strncpy(cap->card, dev->plat_dev->name, sizeof(cap->card) - 1);
cap->bus_info[0] = 0;
cap->version = KERNEL_VERSION(1, 0, 0);
- cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT
- | V4L2_CAP_STREAMING;
+ cap->capabilities = V4L2_CAP_VIDEO_CAPTURE_MPLANE |
+ V4L2_CAP_VIDEO_OUTPUT_MPLANE | V4L2_CAP_STREAMING;
return 0;
}
strncpy(cap->card, dev->plat_dev->name, sizeof(cap->card) - 1);
cap->bus_info[0] = 0;
cap->version = KERNEL_VERSION(1, 0, 0);
- cap->capabilities = V4L2_CAP_VIDEO_CAPTURE
- | V4L2_CAP_VIDEO_OUTPUT
+ cap->capabilities = V4L2_CAP_VIDEO_CAPTURE_MPLANE
+ | V4L2_CAP_VIDEO_OUTPUT_MPLANE
| V4L2_CAP_STREAMING;
return 0;
}
#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include <linux/videodev2.h>
+#include <linux/module.h>
#include <media/sh_mobile_ceu.h>
#include <media/sh_mobile_csi2.h>
#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include <linux/videodev2.h>
+#include <linux/module.h>
#include <media/sh_vou.h>
#include <media/v4l2-common.h>
#include <linux/i2c.h>
#include <linux/delay.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <media/v4l2-device.h>
#include <media/v4l2-subdev.h>
#include <media/v4l2-mediabus.h>
*/
#include <linux/i2c.h>
+#include <linux/module.h>
#include <media/v4l2-int-device.h>
#include "tcm825x.h"
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/i2c.h>
+#include <linux/module.h>
#include <media/v4l2-ioctl.h>
#include <media/v4l2-device.h>
#include <media/videobuf-dma-contig.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/videodev2.h>
+#include <linux/module.h>
#include <media/v4l2-device.h>
#include <media/v4l2-common.h>
#include <linux/slab.h>
#include <linux/videodev2.h>
#include <linux/delay.h>
+#include <linux/module.h>
#include <media/v4l2-device.h>
#include <media/tvp5150.h>
#include <media/v4l2-chip-ident.h>
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/videodev2.h>
+#include <linux/module.h>
#include <media/tvp7002.h>
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
#include <linux/list.h>
+#include <linux/module.h>
#include <media/v4l2-dev.h>
#include <media/tuner.h>
#include "usbvision.h"
menu_info = &mapping->menu_info[query_menu->index];
- if (ctrl->info.flags & UVC_CTRL_FLAG_GET_RES) {
+ if (mapping->data_type == UVC_CTRL_DATA_TYPE_BITMASK &&
+ (ctrl->info.flags & UVC_CTRL_FLAG_GET_RES)) {
s32 bitmap;
if (!ctrl->cached) {
/* Valid menu indices are reported by the GET_RES request for
* UVC controls that support it.
*/
- if (ctrl->info.flags & UVC_CTRL_FLAG_GET_RES) {
+ if (mapping->data_type == UVC_CTRL_DATA_TYPE_BITMASK &&
+ (ctrl->info.flags & UVC_CTRL_FLAG_GET_RES)) {
if (!ctrl->cached) {
ret = uvc_ctrl_populate_cache(chain, ctrl);
if (ret < 0)
#include <linux/ctype.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <media/v4l2-ioctl.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ctrls.h>
fill_event(&ev, ctrl, changes);
list_for_each_entry(sev, &ctrl->ev_subs, node)
- if (sev->fh && (sev->fh != fh ||
- (sev->flags & V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK)))
+ if (sev->fh != fh ||
+ (sev->flags & V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK))
v4l2_event_queue_fh(sev->fh, &ev);
}
if (ctrl->cluster[0]->has_volatiles)
ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE;
}
+ fh = NULL;
}
if (changed || update_inactive) {
/* If a control was changed that was not one of the controls
#include <linux/types.h>
#include <linux/ioctl.h>
+#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/slab.h>
#if defined(CONFIG_SPI)
#include <linux/sched.h>
#include <linux/slab.h>
+#include <linux/export.h>
static unsigned sev_pos(const struct v4l2_subscribed_event *sev, unsigned idx)
{
unsigned long flags;
unsigned i;
+ if (sub->type == V4L2_EVENT_ALL)
+ return -EINVAL;
+
if (elems < 1)
elems = 1;
if (sub->type == V4L2_EVENT_CTRL) {
{
struct v4l2_subscribed_event *sev;
unsigned long flags;
+ int i;
if (sub->type == V4L2_EVENT_ALL) {
v4l2_event_unsubscribe_all(fh);
sev = v4l2_event_subscribed(fh, sub->type, sub->id);
if (sev != NULL) {
+ /* Remove any pending events for this subscription */
+ for (i = 0; i < sev->in_use; i++) {
+ list_del(&sev->events[sev_pos(sev, i)].list);
+ fh->navailable--;
+ }
list_del(&sev->list);
- sev->fh = NULL;
}
spin_unlock_irqrestore(&fh->vdev->fh_lock, flags);
#include <linux/bitops.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <media/v4l2-dev.h>
#include <media/v4l2-fh.h>
#include <media/v4l2-event.h>
#include <linux/list.h>
#include <linux/sort.h>
#include <linux/string.h>
+#include <linux/module.h>
#include <media/v4l2-int-device.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/videodev2.h>
+#include <linux/export.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
continue;
for (plane = 0; plane < vb->num_planes; ++plane) {
+ vb->v4l2_planes[plane].length = q->plane_sizes[plane];
vb->v4l2_planes[plane].m.mem_offset = off;
dprintk(3, "Buffer %d, plane %d offset 0x%08lx\n",
q->num_buffers -= buffers;
if (!q->num_buffers)
q->memory = 0;
+ INIT_LIST_HEAD(&q->queued_list);
}
/**
{
unsigned int plane;
for (plane = 0; plane < vb->num_planes; ++plane) {
+ void *mem_priv = vb->planes[plane].mem_priv;
/*
* If num_users() has not been provided, call_memop
* will return 0, apparently nobody cares about this
* case anyway. If num_users() returns more than 1,
* we are not the only user of the plane's memory.
*/
- if (call_memop(q, plane, num_users,
- vb->planes[plane].mem_priv) > 1)
+ if (mem_priv && call_memop(q, plane, num_users, mem_priv) > 1)
return true;
}
return false;
#include <linux/fs.h>
#include <linux/delay.h>
#include <linux/slab.h>
+#include <linux/module.h>
#define DRIVER_NAME "memstick"
#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/memstick.h>
+#include <linux/module.h>
#define DRIVER_NAME "mspro_block"
#include <linux/highmem.h>
#include <linux/memstick.h>
#include <linux/slab.h>
+#include <linux/module.h>
#define DRIVER_NAME "jmb38x_ms"
#include <linux/highmem.h>
#include <linux/scatterlist.h>
#include <linux/log2.h>
+#include <linux/module.h>
#include <asm/io.h>
#define DRIVER_NAME "tifm_ms"
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/i2o.h>
+#include <linux/module.h>
#include "core.h"
#define OSM_DESCRIPTION "I2O-subsystem"
#include <linux/notifier.h>
#include <linux/slab.h>
#include <linux/err.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/device.h>
#include <linux/interrupt.h>
* TODO: Event handling with irq_chip. Waiting for PRCMU fw support.
*/
+#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/err.h>
#include <linux/platform_device.h>
* Debugfs support for the AB5500 MFD driver
*/
+#include <linux/export.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/mfd/ab5500/ab5500.h>
#include <linux/seq_file.h>
#include <linux/uaccess.h>
#include <linux/fs.h>
+#include <linux/module.h>
#include <linux/debugfs.h>
#include <linux/platform_device.h>
*/
#include <linux/err.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/mfd/ab8500.h>
#include <linux/mfd/abx500.h>
#include <linux/list.h>
#include <linux/slab.h>
#include <linux/err.h>
+#include <linux/module.h>
#include <linux/mfd/abx500.h>
static LIST_HEAD(abx500_list);
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/gpio.h>
+#include <linux/export.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/module.h>
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/pm_runtime.h>
+#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/mfd/core.h>
#include <linux/mfd/max8997.h>
#include <linux/mfd/core.h>
#include <linux/pm_runtime.h>
#include <linux/slab.h>
+#include <linux/module.h>
int mfd_cell_enable(struct platform_device *pdev)
{
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/mutex.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <linux/mfd/pcf50633/core.h>
* published by the Free Software Foundation.
*/
+#include <linux/export.h>
#include <linux/mfd/tmio.h>
int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base)
#include <linux/init.h>
#include <linux/mutex.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/err.h>
*/
#include <linux/init.h>
+#include <linux/export.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/kthread.h>
#include <linux/mfd/wl1273-core.h>
#include <linux/slab.h>
+#include <linux/module.h>
#define DRIVER_DESC "WL1273 FM Radio Core"
*
*/
+#include <linux/module.h>
#include <linux/bug.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/pwm.h>
#include <linux/mfd/ab8500.h>
#include <linux/mfd/abx500.h>
+#include <linux/module.h>
/*
* PWM Out generators
#include <linux/spinlock.h>
#include <linux/atmel-ssc.h>
#include <linux/slab.h>
+#include <linux/module.h>
/* Serialize access to ssc_list and user count */
static DEFINE_SPINLOCK(user_lock);
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/export.h>
/* Number of bytes to reserve for the iomem resource */
#define ATMEL_TC_IOMEM_SIZE 256
#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
+#include <linux/module.h>
#define BH1780_REG_CONTROL 0x80
#define BH1780_REG_PARTID 0x8A
/* CTL-CPLD Version Register */
#define CTL_CPLD_VERSION 0x2000
-static int fpga_of_probe(struct platform_device *op,
- const struct of_device_id *match)
+static int fpga_of_probe(struct platform_device *op)
{
struct device_node *of_node = op->dev.of_node;
struct device *this_device;
{},
};
-static struct of_platform_driver fpga_of_driver = {
+static struct platform_driver fpga_of_driver = {
.probe = fpga_of_probe,
.remove = fpga_of_remove,
.driver = {
static int __init fpga_init(void)
{
led_trigger_register_simple("fpga", &ledtrig_fpga);
- return of_register_platform_driver(&fpga_of_driver);
+ return platform_driver_register(&fpga_of_driver);
}
static void __exit fpga_exit(void)
{
- of_unregister_platform_driver(&fpga_of_driver);
+ platform_driver_unregister(&fpga_of_driver);
led_trigger_unregister_simple(ledtrig_fpga);
}
return true;
}
-static int data_of_probe(struct platform_device *op,
- const struct of_device_id *match)
+static int data_of_probe(struct platform_device *op)
{
struct device_node *of_node = op->dev.of_node;
struct device *this_device;
{},
};
-static struct of_platform_driver data_of_driver = {
+static struct platform_driver data_of_driver = {
.probe = data_of_probe,
.remove = data_of_remove,
.driver = {
static int __init data_init(void)
{
- return of_register_platform_driver(&data_of_driver);
+ return platform_driver_register(&data_of_driver);
}
static void __exit data_exit(void)
{
- of_unregister_platform_driver(&data_of_driver);
+ platform_driver_unregister(&data_of_driver);
}
MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>");
config EEPROM_DIGSY_MTC_CFG
bool "DigsyMTC display configuration EEPROMs device"
- depends on PPC_MPC5200_GPIO && GPIOLIB && SPI_GPIO
+ depends on GPIO_MPC5200 && SPI_GPIO
help
This option enables access to display configuration EEPROMs
on digsy_mtc board. You have to additionally select Microwire
#include <linux/nmi.h>
#include <linux/delay.h>
#include <linux/kthread.h>
+#include <linux/module.h>
#define v1printk(a...) do { \
if (verbose) \
#include <linux/interrupt.h>
#include <linux/uaccess.h>
#include <linux/delay.h>
+#include <linux/export.h>
#include <asm/io_apic.h>
#include "gru.h"
#include "grulib.h"
#include <linux/skbuff.h>
#include <linux/ti_wilink_st.h>
+#include <linux/module.h>
#define MAX_ST_DEVICES 3 /* Imagine 1 on each UART for now */
#include <linux/tifm.h>
#include <linux/dma-mapping.h>
+#include <linux/module.h>
#define DRIVER_NAME "tifm_7xx1"
#define DRIVER_VERSION "0.8"
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/idr.h>
+#include <linux/module.h>
#define DRIVER_NAME "tifm_core"
#define DRIVER_VERSION "0.8"
* MMC card bus driver model
*/
+#include <linux/export.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/slab.h>
+#include <linux/stat.h>
#include <linux/pm_runtime.h>
#include <linux/mmc/card.h>
* published by the Free Software Foundation.
*/
#include <linux/moduleparam.h>
+#include <linux/export.h>
#include <linux/debugfs.h>
#include <linux/fs.h>
#include <linux/seq_file.h>
#include <linux/err.h>
#include <linux/idr.h>
#include <linux/pagemap.h>
+#include <linux/export.h>
#include <linux/leds.h>
#include <linux/slab.h>
#include <linux/suspend.h>
#include <linux/err.h>
#include <linux/slab.h>
+#include <linux/stat.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
*/
#include <linux/slab.h>
+#include <linux/export.h>
#include <linux/types.h>
#include <linux/scatterlist.h>
#include <linux/types.h>
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/mmc/card.h>
#ifndef SDIO_VENDOR_ID_TI
#include <linux/err.h>
#include <linux/slab.h>
+#include <linux/stat.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
#include <linux/slab.h>
#include <linux/types.h>
+#include <linux/export.h>
#include <linux/scatterlist.h>
#include <linux/mmc/host.h>
#include <linux/device.h>
#include <linux/err.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <linux/pm_runtime.h>
* your option) any later version.
*/
+#include <linux/export.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
#include <linux/mmc/sdio.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/kthread.h>
+#include <linux/export.h>
#include <linux/wait.h>
#include <linux/delay.h>
/* VENDOR SPEC register */
#define SDHCI_VENDOR_SPEC 0xC0
#define SDHCI_VENDOR_SPEC_SDIO_QUIRK 0x00000002
+#define SDHCI_WTMK_LVL 0x44
#define SDHCI_MIX_CTRL 0x48
/*
if (is_imx53_esdhc(imx_data))
imx_data->flags |= ESDHC_FLAG_MULTIBLK_NO_INT;
+ /*
+ * The imx6q ROM code will change the default watermark level setting
+ * to something insane. Change it back here.
+ */
+ if (is_imx6q_usdhc(imx_data))
+ writel(0x08100810, host->ioaddr + SDHCI_WTMK_LVL);
+
boarddata = &imx_data->boarddata;
if (sdhci_esdhc_imx_probe_dt(pdev, boarddata) < 0) {
if (!host->mmc->parent->platform_data) {
*/
#include <linux/err.h>
+#include <linux/module.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
if MTD
-config MTD_DEBUG
- bool "Debugging"
- help
- This turns on low-level debugging for the entire MTD sub-system.
- Normally, you should say 'N'.
-
-config MTD_DEBUG_VERBOSE
- int "Debugging verbosity (0 = quiet, 3 = noisy)"
- depends on MTD_DEBUG
- default "0"
- help
- Determines the verbosity level of the MTD debugging messages.
-
config MTD_TESTS
- tristate "MTD tests support"
+ tristate "MTD tests support (DANGEROUS)"
depends on m
help
This option includes various MTD tests into compilation. The tests
should normally be compiled as kernel modules. The modules perform
various checks and verifications when loaded.
+ WARNING: some of the tests will ERASE entire MTD device which they
+ test. Do not use these tests unless you really know what you do.
+
config MTD_REDBOOT_PARTS
tristate "RedBoot partition table parsing"
---help---
'physmap' map driver (CONFIG_MTD_PHYSMAP) does this, for example.
config MTD_OF_PARTS
- def_bool y
+ tristate "OpenFirmware partitioning information support"
+ default Y
depends on OF
help
This provides a partition parsing function which derives
# Core functionality.
obj-$(CONFIG_MTD) += mtd.o
mtd-y := mtdcore.o mtdsuper.o mtdconcat.o mtdpart.o
-mtd-$(CONFIG_MTD_OF_PARTS) += ofpart.o
+obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
}
static int parse_afs_partitions(struct mtd_info *mtd,
- struct mtd_partition **pparts,
- unsigned long origin)
+ struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
{
struct mtd_partition *parts;
u_int mask, off, idx, sz;
#include <linux/mtd/partitions.h>
#include <linux/bootmem.h>
#include <linux/magic.h>
+#include <linux/module.h>
#define AR7_PARTS 4
#define ROOT_OFFSET 0xe0000
static int create_mtd_partitions(struct mtd_info *master,
struct mtd_partition **pparts,
- unsigned long origin)
+ struct mtd_part_parser_data *data)
{
struct ar7_bin_rec header;
unsigned int offset;
if (((major << 8) | minor) < 0x3131) {
/* CFI version 1.0 => don't trust bootloc */
- DEBUG(MTD_DEBUG_LEVEL1,
- "%s: JEDEC Vendor ID is 0x%02X Device ID is 0x%02X\n",
+ pr_debug("%s: JEDEC Vendor ID is 0x%02X Device ID is 0x%02X\n",
map->name, cfi->mfr, cfi->id);
/* AFAICS all 29LV400 with a bottom boot block have a device ID
* the 8-bit device ID.
*/
(cfi->mfr == CFI_MFR_MACRONIX)) {
- DEBUG(MTD_DEBUG_LEVEL1,
- "%s: Macronix MX29LV400C with bottom boot block"
+ pr_debug("%s: Macronix MX29LV400C with bottom boot block"
" detected\n", map->name);
extp->TopBottom = 2; /* bottom boot */
} else
extp->TopBottom = 2; /* bottom boot */
}
- DEBUG(MTD_DEBUG_LEVEL1,
- "%s: AMD CFI PRI V%c.%c has no boot block field;"
+ pr_debug("%s: AMD CFI PRI V%c.%c has no boot block field;"
" deduced %s from Device ID\n", map->name, major, minor,
extp->TopBottom == 2 ? "bottom" : "top");
}
struct map_info *map = mtd->priv;
struct cfi_private *cfi = map->fldrv_priv;
if (cfi->cfiq->BufWriteTimeoutTyp) {
- DEBUG(MTD_DEBUG_LEVEL1, "Using buffer write method\n" );
+ pr_debug("Using buffer write method\n" );
mtd->write = cfi_amdstd_write_buffers;
}
}
mtd->writesize = 1;
mtd->writebufsize = cfi_interleave(cfi) << cfi->cfiq->MaxBufWriteSize;
- DEBUG(MTD_DEBUG_LEVEL3, "MTD %s(): write buffer size %d\n",
- __func__, mtd->writebufsize);
+ pr_debug("MTD %s(): write buffer size %d\n", __func__,
+ mtd->writebufsize);
mtd->reboot_notifier.notifier_call = cfi_amdstd_reboot;
return ret;
}
- DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n",
+ pr_debug("MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n",
__func__, adr, datum.x[0] );
/*
*/
oldd = map_read(map, adr);
if (map_word_equal(map, oldd, datum)) {
- DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): NOP\n",
+ pr_debug("MTD %s(): NOP\n",
__func__);
goto op_done;
}
datum = map_word_load(map, buf);
- DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n",
+ pr_debug("MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n",
__func__, adr, datum.x[0] );
XIP_INVAL_CACHED_RANGE(map, adr, len);
return ret;
}
- DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): ERASE 0x%.8lx\n",
+ pr_debug("MTD %s(): ERASE 0x%.8lx\n",
__func__, chip->start );
XIP_INVAL_CACHED_RANGE(map, adr, map->size);
return ret;
}
- DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): ERASE 0x%.8lx\n",
+ pr_debug("MTD %s(): ERASE 0x%.8lx\n",
__func__, adr );
XIP_INVAL_CACHED_RANGE(map, adr, len);
goto out_unlock;
chip->state = FL_LOCKING;
- DEBUG(MTD_DEBUG_LEVEL3, "MTD %s(): LOCK 0x%08lx len %d\n",
- __func__, adr, len);
+ pr_debug("MTD %s(): LOCK 0x%08lx len %d\n", __func__, adr, len);
cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi,
cfi->device_type, NULL);
goto out_unlock;
chip->state = FL_UNLOCKING;
- DEBUG(MTD_DEBUG_LEVEL3, "MTD %s(): LOCK 0x%08lx len %d\n",
- __func__, adr, len);
+ pr_debug("MTD %s(): LOCK 0x%08lx len %d\n", __func__, adr, len);
cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi,
cfi->device_type, NULL);
/* Refuse the operation if the we cannot look behind the chip */
if (chip->start < 0x400000) {
- DEBUG( MTD_DEBUG_LEVEL3,
- "MTD %s(): chip->start: %lx wanted >= 0x400000\n",
+ pr_debug( "MTD %s(): chip->start: %lx wanted >= 0x400000\n",
__func__, chip->start );
return -EIO;
}
* (oh and incidentaly the jedec spec - 3.5.3.3) the reset
* sequence is *supposed* to be 0xaa at 0x5555, 0x55 at
* 0x2aaa, 0xF0 at 0x5555 this will not affect the AMD chips
- * as they will ignore the writes and dont care what address
+ * as they will ignore the writes and don't care what address
* the F0 is written to */
if (cfi->addr_unlock1) {
- DEBUG( MTD_DEBUG_LEVEL3,
- "reset unlock called %x %x \n",
+ pr_debug( "reset unlock called %x %x \n",
cfi->addr_unlock1,cfi->addr_unlock2);
cfi_send_gen_cmd(0xaa, cfi->addr_unlock1, base, map, cfi, cfi->device_type, NULL);
cfi_send_gen_cmd(0x55, cfi->addr_unlock2, base, map, cfi, cfi->device_type, NULL);
uint8_t uaddr;
if (!(jedec_table[index].devtypes & cfi->device_type)) {
- DEBUG(MTD_DEBUG_LEVEL1, "Rejecting potential %s with incompatible %d-bit device type\n",
+ pr_debug("Rejecting potential %s with incompatible %d-bit device type\n",
jedec_table[index].name, 4 * (1<<cfi->device_type));
return 0;
}
* there aren't.
*/
if (finfo->dev_id > 0xff) {
- DEBUG( MTD_DEBUG_LEVEL3, "%s(): ID is not 8bit\n",
+ pr_debug("%s(): ID is not 8bit\n",
__func__);
goto match_done;
}
}
/* the part size must fit in the memory window */
- DEBUG( MTD_DEBUG_LEVEL3,
- "MTD %s(): Check fit 0x%.8x + 0x%.8x = 0x%.8x\n",
+ pr_debug("MTD %s(): Check fit 0x%.8x + 0x%.8x = 0x%.8x\n",
__func__, base, 1 << finfo->dev_size, base + (1 << finfo->dev_size) );
if ( base + cfi_interleave(cfi) * ( 1 << finfo->dev_size ) > map->size ) {
- DEBUG( MTD_DEBUG_LEVEL3,
- "MTD %s(): 0x%.4x 0x%.4x %dKiB doesn't fit\n",
+ pr_debug("MTD %s(): 0x%.4x 0x%.4x %dKiB doesn't fit\n",
__func__, finfo->mfr_id, finfo->dev_id,
1 << finfo->dev_size );
goto match_done;
uaddr = finfo->uaddr;
- DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): check unlock addrs 0x%.4x 0x%.4x\n",
+ pr_debug("MTD %s(): check unlock addrs 0x%.4x 0x%.4x\n",
__func__, cfi->addr_unlock1, cfi->addr_unlock2 );
if ( MTD_UADDR_UNNECESSARY != uaddr && MTD_UADDR_DONT_CARE != uaddr
&& ( unlock_addrs[uaddr].addr1 / cfi->device_type != cfi->addr_unlock1 ||
unlock_addrs[uaddr].addr2 / cfi->device_type != cfi->addr_unlock2 ) ) {
- DEBUG( MTD_DEBUG_LEVEL3,
- "MTD %s(): 0x%.4x 0x%.4x did not match\n",
+ pr_debug("MTD %s(): 0x%.4x 0x%.4x did not match\n",
__func__,
unlock_addrs[uaddr].addr1,
unlock_addrs[uaddr].addr2);
* FIXME - write a driver that takes all of the chip info as
* module parameters, doesn't probe but forces a load.
*/
- DEBUG( MTD_DEBUG_LEVEL3,
- "MTD %s(): check ID's disappear when not in ID mode\n",
+ pr_debug("MTD %s(): check ID's disappear when not in ID mode\n",
__func__ );
jedec_reset( base, map, cfi );
mfr = jedec_read_mfr( map, base, cfi );
id = jedec_read_id( map, base, cfi );
if ( mfr == cfi->mfr && id == cfi->id ) {
- DEBUG( MTD_DEBUG_LEVEL3,
- "MTD %s(): ID 0x%.2x:0x%.2x did not change after reset:\n"
+ pr_debug("MTD %s(): ID 0x%.2x:0x%.2x did not change after reset:\n"
"You might need to manually specify JEDEC parameters.\n",
__func__, cfi->mfr, cfi->id );
goto match_done;
* Put the device back in ID mode - only need to do this if we
* were truly frobbing a real device.
*/
- DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): return to ID mode\n", __func__ );
+ pr_debug("MTD %s(): return to ID mode\n", __func__ );
if (cfi->addr_unlock1) {
cfi_send_gen_cmd(0xaa, cfi->addr_unlock1, base, map, cfi, cfi->device_type, NULL);
cfi_send_gen_cmd(0x55, cfi->addr_unlock2, base, map, cfi, cfi->device_type, NULL);
cfi->mfr = jedec_read_mfr(map, base, cfi);
cfi->id = jedec_read_id(map, base, cfi);
- DEBUG(MTD_DEBUG_LEVEL3,
- "Search for id:(%02x %02x) interleave(%d) type(%d)\n",
+ pr_debug("Search for id:(%02x %02x) interleave(%d) type(%d)\n",
cfi->mfr, cfi->id, cfi_interleave(cfi), cfi->device_type);
for (i = 0; i < ARRAY_SIZE(jedec_table); i++) {
if ( jedec_match( base, map, cfi, &jedec_table[i] ) ) {
- DEBUG( MTD_DEBUG_LEVEL3,
- "MTD %s(): matched device 0x%x,0x%x unlock_addrs: 0x%.4x 0x%.4x\n",
+ pr_debug("MTD %s(): matched device 0x%x,0x%x unlock_addrs: 0x%.4x 0x%.4x\n",
__func__, cfi->mfr, cfi->id,
cfi->addr_unlock1, cfi->addr_unlock2 );
if (!cfi_jedec_setup(map, cfi, i))
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/bootmem.h>
+#include <linux/module.h>
/* error message prefix */
#define ERRP "mtd: "
extra_mem_size;
parts = kzalloc(alloc_size, GFP_KERNEL);
if (!parts)
- {
- printk(KERN_ERR ERRP "out of memory\n");
return NULL;
- }
extra_mem = (unsigned char *)(parts + *num_parts);
}
/* enter this partition (offset will be calculated later if it is zero at this point) */
* the first one in the chain if a NULL mtd_id is passed in.
*/
static int parse_cmdline_partitions(struct mtd_info *master,
- struct mtd_partition **pparts,
- unsigned long origin)
+ struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
{
unsigned long offset;
int i;
under "NAND Flash Device Drivers" (currently that driver does not
support all Millennium Plus devices).
+config MTD_DOCG3
+ tristate "M-Systems Disk-On-Chip G3"
+ ---help---
+ This provides an MTD device driver for the M-Systems DiskOnChip
+ G3 devices.
+
+ The driver provides access to G3 DiskOnChip, distributed by
+ M-Systems and now Sandisk. The support is very experimental,
+ and doesn't give access to any write operations.
+
config MTD_DOCPROBE
tristate
select MTD_DOCECC
config MTD_DOCPROBE_ADDRESS
hex "Physical address of DiskOnChip" if MTD_DOCPROBE_ADVANCED
depends on MTD_DOCPROBE
- default "0x0000" if MTD_DOCPROBE_ADVANCED
- default "0" if !MTD_DOCPROBE_ADVANCED
+ default "0x0"
---help---
By default, the probe for DiskOnChip devices will look for a
DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
obj-$(CONFIG_MTD_DOC2000) += doc2000.o
obj-$(CONFIG_MTD_DOC2001) += doc2001.o
obj-$(CONFIG_MTD_DOC2001PLUS) += doc2001plus.o
+obj-$(CONFIG_MTD_DOCG3) += docg3.o
obj-$(CONFIG_MTD_DOCPROBE) += docprobe.o
obj-$(CONFIG_MTD_DOCECC) += docecc.o
obj-$(CONFIG_MTD_SLRAM) += slram.o
obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
obj-$(CONFIG_MTD_M25P80) += m25p80.o
obj-$(CONFIG_MTD_SST25L) += sst25l.o
+
+CFLAGS_docg3.o += -I$(src)
\ No newline at end of file
void __iomem *docptr = doc->virtadr;
unsigned long timeo = jiffies + (HZ * 10);
- DEBUG(MTD_DEBUG_LEVEL3,
- "_DoC_WaitReady called for out-of-line wait\n");
+ pr_debug("_DoC_WaitReady called for out-of-line wait\n");
/* Out-of-line routine to wait for chip response */
while (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B)) {
DoC_Delay(doc, 2);
if (time_after(jiffies, timeo)) {
- DEBUG(MTD_DEBUG_LEVEL2, "_DoC_WaitReady timed out.\n");
+ pr_debug("_DoC_WaitReady timed out.\n");
return -EIO;
}
udelay(1);
/* Reset the chip */
if (DoC_Command(doc, NAND_CMD_RESET, CDSN_CTRL_WP)) {
- DEBUG(MTD_DEBUG_LEVEL2,
- "DoC_Command (reset) for %d,%d returned true\n",
+ pr_debug("DoC_Command (reset) for %d,%d returned true\n",
floor, chip);
return 0;
}
/* Read the NAND chip ID: 1. Send ReadID command */
if (DoC_Command(doc, NAND_CMD_READID, CDSN_CTRL_WP)) {
- DEBUG(MTD_DEBUG_LEVEL2,
- "DoC_Command (ReadID) for %d,%d returned true\n",
+ pr_debug("DoC_Command (ReadID) for %d,%d returned true\n",
floor, chip);
return 0;
}
#ifdef ECC_DEBUG
printk(KERN_ERR "DiskOnChip ECC Error: Read at %lx\n", (long)from);
#endif
- /* Read the ECC syndrom through the DiskOnChip ECC
+ /* Read the ECC syndrome through the DiskOnChip ECC
logic. These syndrome will be all ZERO when there
is no error */
for (i = 0; i < 6; i++) {
uint8_t *buf = ops->oobbuf;
size_t len = ops->len;
- BUG_ON(ops->mode != MTD_OOB_PLACE);
+ BUG_ON(ops->mode != MTD_OPS_PLACE_OOB);
ofs += ops->ooboffs;
struct DiskOnChip *this = mtd->priv;
int ret;
- BUG_ON(ops->mode != MTD_OOB_PLACE);
+ BUG_ON(ops->mode != MTD_OPS_PLACE_OOB);
mutex_lock(&this->lock);
ret = doc_write_oob_nolock(mtd, ofs + ops->ooboffs, ops->len,
{
unsigned short c = 0xffff;
- DEBUG(MTD_DEBUG_LEVEL3,
- "_DoC_WaitReady called for out-of-line wait\n");
+ pr_debug("_DoC_WaitReady called for out-of-line wait\n");
/* Out-of-line routine to wait for chip response */
while (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B) && --c)
;
if (c == 0)
- DEBUG(MTD_DEBUG_LEVEL2, "_DoC_WaitReady timed out.\n");
+ pr_debug("_DoC_WaitReady timed out.\n");
return (c == 0);
}
#ifdef ECC_DEBUG
printk("DiskOnChip ECC Error: Read at %lx\n", (long)from);
#endif
- /* Read the ECC syndrom through the DiskOnChip ECC logic.
+ /* Read the ECC syndrome through the DiskOnChip ECC logic.
These syndrome will be all ZERO when there is no error */
for (i = 0; i < 6; i++) {
syndrome[i] = ReadDOC(docptr, ECCSyndrome0 + i);
uint8_t *buf = ops->oobbuf;
size_t len = ops->len;
- BUG_ON(ops->mode != MTD_OOB_PLACE);
+ BUG_ON(ops->mode != MTD_OPS_PLACE_OOB);
ofs += ops->ooboffs;
uint8_t *buf = ops->oobbuf;
size_t len = ops->len;
- BUG_ON(ops->mode != MTD_OOB_PLACE);
+ BUG_ON(ops->mode != MTD_OPS_PLACE_OOB);
ofs += ops->ooboffs;
{
unsigned int c = 0xffff;
- DEBUG(MTD_DEBUG_LEVEL3,
- "_DoC_WaitReady called for out-of-line wait\n");
+ pr_debug("_DoC_WaitReady called for out-of-line wait\n");
/* Out-of-line routine to wait for chip response */
while (((ReadDOC(docptr, Mplus_FlashControl) & CDSN_CTRL_FR_B_MASK) != CDSN_CTRL_FR_B_MASK) && --c)
;
if (c == 0)
- DEBUG(MTD_DEBUG_LEVEL2, "_DoC_WaitReady timed out.\n");
+ pr_debug("_DoC_WaitReady timed out.\n");
return (c == 0);
}
#ifdef ECC_DEBUG
printk("DiskOnChip ECC Error: Read at %lx\n", (long)from);
#endif
- /* Read the ECC syndrom through the DiskOnChip ECC logic.
+ /* Read the ECC syndrome through the DiskOnChip ECC logic.
These syndrome will be all ZERO when there is no error */
for (i = 0; i < 6; i++)
syndrome[i] = ReadDOC(docptr, Mplus_ECCSyndrome0 + i);
uint8_t *buf = ops->oobbuf;
size_t len = ops->len;
- BUG_ON(ops->mode != MTD_OOB_PLACE);
+ BUG_ON(ops->mode != MTD_OPS_PLACE_OOB);
ofs += ops->ooboffs;
uint8_t *buf = ops->oobbuf;
size_t len = ops->len;
- BUG_ON(ops->mode != MTD_OOB_PLACE);
+ BUG_ON(ops->mode != MTD_OPS_PLACE_OOB);
ofs += ops->ooboffs;
* ECC algorithm for M-systems disk on chip. We use the excellent Reed
* Solmon code of Phil Karn (karn@ka9q.ampr.org) available under the
* GNU GPL License. The rest is simply to convert the disk on chip
- * syndrom into a standard syndom.
+ * syndrome into a standard syndome.
*
* Author: Fabrice Bellard (fabrice.bellard@netgem.com)
* Copyright (C) 2000 Netgem S.A.
--- /dev/null
+/*
+ * Handles the M-Systems DiskOnChip G3 chip
+ *
+ * Copyright (C) 2011 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/platform_device.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+#define CREATE_TRACE_POINTS
+#include "docg3.h"
+
+/*
+ * This driver handles the DiskOnChip G3 flash memory.
+ *
+ * As no specification is available from M-Systems/Sandisk, this drivers lacks
+ * several functions available on the chip, as :
+ * - block erase
+ * - page write
+ * - IPL write
+ * - ECC fixing (lack of BCH algorith understanding)
+ * - powerdown / powerup
+ *
+ * The bus data width (8bits versus 16bits) is not handled (if_cfg flag), and
+ * the driver assumes a 16bits data bus.
+ *
+ * DocG3 relies on 2 ECC algorithms, which are handled in hardware :
+ * - a 1 byte Hamming code stored in the OOB for each page
+ * - a 7 bytes BCH code stored in the OOB for each page
+ * The BCH part is only used for check purpose, no correction is available as
+ * some information is missing. What is known is that :
+ * - BCH is in GF(2^14)
+ * - BCH is over data of 520 bytes (512 page + 7 page_info bytes
+ * + 1 hamming byte)
+ * - BCH can correct up to 4 bits (t = 4)
+ * - BCH syndroms are calculated in hardware, and checked in hardware as well
+ *
+ */
+
+static inline u8 doc_readb(struct docg3 *docg3, u16 reg)
+{
+ u8 val = readb(docg3->base + reg);
+
+ trace_docg3_io(0, 8, reg, (int)val);
+ return val;
+}
+
+static inline u16 doc_readw(struct docg3 *docg3, u16 reg)
+{
+ u16 val = readw(docg3->base + reg);
+
+ trace_docg3_io(0, 16, reg, (int)val);
+ return val;
+}
+
+static inline void doc_writeb(struct docg3 *docg3, u8 val, u16 reg)
+{
+ writeb(val, docg3->base + reg);
+ trace_docg3_io(1, 16, reg, val);
+}
+
+static inline void doc_writew(struct docg3 *docg3, u16 val, u16 reg)
+{
+ writew(val, docg3->base + reg);
+ trace_docg3_io(1, 16, reg, val);
+}
+
+static inline void doc_flash_command(struct docg3 *docg3, u8 cmd)
+{
+ doc_writeb(docg3, cmd, DOC_FLASHCOMMAND);
+}
+
+static inline void doc_flash_sequence(struct docg3 *docg3, u8 seq)
+{
+ doc_writeb(docg3, seq, DOC_FLASHSEQUENCE);
+}
+
+static inline void doc_flash_address(struct docg3 *docg3, u8 addr)
+{
+ doc_writeb(docg3, addr, DOC_FLASHADDRESS);
+}
+
+static char const *part_probes[] = { "cmdlinepart", "saftlpart", NULL };
+
+static int doc_register_readb(struct docg3 *docg3, int reg)
+{
+ u8 val;
+
+ doc_writew(docg3, reg, DOC_READADDRESS);
+ val = doc_readb(docg3, reg);
+ doc_vdbg("Read register %04x : %02x\n", reg, val);
+ return val;
+}
+
+static int doc_register_readw(struct docg3 *docg3, int reg)
+{
+ u16 val;
+
+ doc_writew(docg3, reg, DOC_READADDRESS);
+ val = doc_readw(docg3, reg);
+ doc_vdbg("Read register %04x : %04x\n", reg, val);
+ return val;
+}
+
+/**
+ * doc_delay - delay docg3 operations
+ * @docg3: the device
+ * @nbNOPs: the number of NOPs to issue
+ *
+ * As no specification is available, the right timings between chip commands are
+ * unknown. The only available piece of information are the observed nops on a
+ * working docg3 chip.
+ * Therefore, doc_delay relies on a busy loop of NOPs, instead of scheduler
+ * friendlier msleep() functions or blocking mdelay().
+ */
+static void doc_delay(struct docg3 *docg3, int nbNOPs)
+{
+ int i;
+
+ doc_dbg("NOP x %d\n", nbNOPs);
+ for (i = 0; i < nbNOPs; i++)
+ doc_writeb(docg3, 0, DOC_NOP);
+}
+
+static int is_prot_seq_error(struct docg3 *docg3)
+{
+ int ctrl;
+
+ ctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+ return ctrl & (DOC_CTRL_PROTECTION_ERROR | DOC_CTRL_SEQUENCE_ERROR);
+}
+
+static int doc_is_ready(struct docg3 *docg3)
+{
+ int ctrl;
+
+ ctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+ return ctrl & DOC_CTRL_FLASHREADY;
+}
+
+static int doc_wait_ready(struct docg3 *docg3)
+{
+ int maxWaitCycles = 100;
+
+ do {
+ doc_delay(docg3, 4);
+ cpu_relax();
+ } while (!doc_is_ready(docg3) && maxWaitCycles--);
+ doc_delay(docg3, 2);
+ if (maxWaitCycles > 0)
+ return 0;
+ else
+ return -EIO;
+}
+
+static int doc_reset_seq(struct docg3 *docg3)
+{
+ int ret;
+
+ doc_writeb(docg3, 0x10, DOC_FLASHCONTROL);
+ doc_flash_sequence(docg3, DOC_SEQ_RESET);
+ doc_flash_command(docg3, DOC_CMD_RESET);
+ doc_delay(docg3, 2);
+ ret = doc_wait_ready(docg3);
+
+ doc_dbg("doc_reset_seq() -> isReady=%s\n", ret ? "false" : "true");
+ return ret;
+}
+
+/**
+ * doc_read_data_area - Read data from data area
+ * @docg3: the device
+ * @buf: the buffer to fill in
+ * @len: the lenght to read
+ * @first: first time read, DOC_READADDRESS should be set
+ *
+ * Reads bytes from flash data. Handles the single byte / even bytes reads.
+ */
+static void doc_read_data_area(struct docg3 *docg3, void *buf, int len,
+ int first)
+{
+ int i, cdr, len4;
+ u16 data16, *dst16;
+ u8 data8, *dst8;
+
+ doc_dbg("doc_read_data_area(buf=%p, len=%d)\n", buf, len);
+ cdr = len & 0x3;
+ len4 = len - cdr;
+
+ if (first)
+ doc_writew(docg3, DOC_IOSPACE_DATA, DOC_READADDRESS);
+ dst16 = buf;
+ for (i = 0; i < len4; i += 2) {
+ data16 = doc_readw(docg3, DOC_IOSPACE_DATA);
+ *dst16 = data16;
+ dst16++;
+ }
+
+ if (cdr) {
+ doc_writew(docg3, DOC_IOSPACE_DATA | DOC_READADDR_ONE_BYTE,
+ DOC_READADDRESS);
+ doc_delay(docg3, 1);
+ dst8 = (u8 *)dst16;
+ for (i = 0; i < cdr; i++) {
+ data8 = doc_readb(docg3, DOC_IOSPACE_DATA);
+ *dst8 = data8;
+ dst8++;
+ }
+ }
+}
+
+/**
+ * doc_set_data_mode - Sets the flash to reliable data mode
+ * @docg3: the device
+ *
+ * The reliable data mode is a bit slower than the fast mode, but less errors
+ * occur. Entering the reliable mode cannot be done without entering the fast
+ * mode first.
+ */
+static void doc_set_reliable_mode(struct docg3 *docg3)
+{
+ doc_dbg("doc_set_reliable_mode()\n");
+ doc_flash_sequence(docg3, DOC_SEQ_SET_MODE);
+ doc_flash_command(docg3, DOC_CMD_FAST_MODE);
+ doc_flash_command(docg3, DOC_CMD_RELIABLE_MODE);
+ doc_delay(docg3, 2);
+}
+
+/**
+ * doc_set_asic_mode - Set the ASIC mode
+ * @docg3: the device
+ * @mode: the mode
+ *
+ * The ASIC can work in 3 modes :
+ * - RESET: all registers are zeroed
+ * - NORMAL: receives and handles commands
+ * - POWERDOWN: minimal poweruse, flash parts shut off
+ */
+static void doc_set_asic_mode(struct docg3 *docg3, u8 mode)
+{
+ int i;
+
+ for (i = 0; i < 12; i++)
+ doc_readb(docg3, DOC_IOSPACE_IPL);
+
+ mode |= DOC_ASICMODE_MDWREN;
+ doc_dbg("doc_set_asic_mode(%02x)\n", mode);
+ doc_writeb(docg3, mode, DOC_ASICMODE);
+ doc_writeb(docg3, ~mode, DOC_ASICMODECONFIRM);
+ doc_delay(docg3, 1);
+}
+
+/**
+ * doc_set_device_id - Sets the devices id for cascaded G3 chips
+ * @docg3: the device
+ * @id: the chip to select (amongst 0, 1, 2, 3)
+ *
+ * There can be 4 cascaded G3 chips. This function selects the one which will
+ * should be the active one.
+ */
+static void doc_set_device_id(struct docg3 *docg3, int id)
+{
+ u8 ctrl;
+
+ doc_dbg("doc_set_device_id(%d)\n", id);
+ doc_writeb(docg3, id, DOC_DEVICESELECT);
+ ctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+
+ ctrl &= ~DOC_CTRL_VIOLATION;
+ ctrl |= DOC_CTRL_CE;
+ doc_writeb(docg3, ctrl, DOC_FLASHCONTROL);
+}
+
+/**
+ * doc_set_extra_page_mode - Change flash page layout
+ * @docg3: the device
+ *
+ * Normally, the flash page is split into the data (512 bytes) and the out of
+ * band data (16 bytes). For each, 4 more bytes can be accessed, where the wear
+ * leveling counters are stored. To access this last area of 4 bytes, a special
+ * mode must be input to the flash ASIC.
+ *
+ * Returns 0 if no error occured, -EIO else.
+ */
+static int doc_set_extra_page_mode(struct docg3 *docg3)
+{
+ int fctrl;
+
+ doc_dbg("doc_set_extra_page_mode()\n");
+ doc_flash_sequence(docg3, DOC_SEQ_PAGE_SIZE_532);
+ doc_flash_command(docg3, DOC_CMD_PAGE_SIZE_532);
+ doc_delay(docg3, 2);
+
+ fctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+ if (fctrl & (DOC_CTRL_PROTECTION_ERROR | DOC_CTRL_SEQUENCE_ERROR))
+ return -EIO;
+ else
+ return 0;
+}
+
+/**
+ * doc_seek - Set both flash planes to the specified block, page for reading
+ * @docg3: the device
+ * @block0: the first plane block index
+ * @block1: the second plane block index
+ * @page: the page index within the block
+ * @wear: if true, read will occur on the 4 extra bytes of the wear area
+ * @ofs: offset in page to read
+ *
+ * Programs the flash even and odd planes to the specific block and page.
+ * Alternatively, programs the flash to the wear area of the specified page.
+ */
+static int doc_read_seek(struct docg3 *docg3, int block0, int block1, int page,
+ int wear, int ofs)
+{
+ int sector, ret = 0;
+
+ doc_dbg("doc_seek(blocks=(%d,%d), page=%d, ofs=%d, wear=%d)\n",
+ block0, block1, page, ofs, wear);
+
+ if (!wear && (ofs < 2 * DOC_LAYOUT_PAGE_SIZE)) {
+ doc_flash_sequence(docg3, DOC_SEQ_SET_PLANE1);
+ doc_flash_command(docg3, DOC_CMD_READ_PLANE1);
+ doc_delay(docg3, 2);
+ } else {
+ doc_flash_sequence(docg3, DOC_SEQ_SET_PLANE2);
+ doc_flash_command(docg3, DOC_CMD_READ_PLANE2);
+ doc_delay(docg3, 2);
+ }
+
+ doc_set_reliable_mode(docg3);
+ if (wear)
+ ret = doc_set_extra_page_mode(docg3);
+ if (ret)
+ goto out;
+
+ sector = (block0 << DOC_ADDR_BLOCK_SHIFT) + (page & DOC_ADDR_PAGE_MASK);
+ doc_flash_sequence(docg3, DOC_SEQ_READ);
+ doc_flash_command(docg3, DOC_CMD_PROG_BLOCK_ADDR);
+ doc_delay(docg3, 1);
+ doc_flash_address(docg3, sector & 0xff);
+ doc_flash_address(docg3, (sector >> 8) & 0xff);
+ doc_flash_address(docg3, (sector >> 16) & 0xff);
+ doc_delay(docg3, 1);
+
+ sector = (block1 << DOC_ADDR_BLOCK_SHIFT) + (page & DOC_ADDR_PAGE_MASK);
+ doc_flash_command(docg3, DOC_CMD_PROG_BLOCK_ADDR);
+ doc_delay(docg3, 1);
+ doc_flash_address(docg3, sector & 0xff);
+ doc_flash_address(docg3, (sector >> 8) & 0xff);
+ doc_flash_address(docg3, (sector >> 16) & 0xff);
+ doc_delay(docg3, 2);
+
+out:
+ return ret;
+}
+
+/**
+ * doc_read_page_ecc_init - Initialize hardware ECC engine
+ * @docg3: the device
+ * @len: the number of bytes covered by the ECC (BCH covered)
+ *
+ * The function does initialize the hardware ECC engine to compute the Hamming
+ * ECC (on 1 byte) and the BCH Syndroms (on 7 bytes).
+ *
+ * Return 0 if succeeded, -EIO on error
+ */
+static int doc_read_page_ecc_init(struct docg3 *docg3, int len)
+{
+ doc_writew(docg3, DOC_ECCCONF0_READ_MODE
+ | DOC_ECCCONF0_BCH_ENABLE | DOC_ECCCONF0_HAMMING_ENABLE
+ | (len & DOC_ECCCONF0_DATA_BYTES_MASK),
+ DOC_ECCCONF0);
+ doc_delay(docg3, 4);
+ doc_register_readb(docg3, DOC_FLASHCONTROL);
+ return doc_wait_ready(docg3);
+}
+
+/**
+ * doc_read_page_prepare - Prepares reading data from a flash page
+ * @docg3: the device
+ * @block0: the first plane block index on flash memory
+ * @block1: the second plane block index on flash memory
+ * @page: the page index in the block
+ * @offset: the offset in the page (must be a multiple of 4)
+ *
+ * Prepares the page to be read in the flash memory :
+ * - tell ASIC to map the flash pages
+ * - tell ASIC to be in read mode
+ *
+ * After a call to this method, a call to doc_read_page_finish is mandatory,
+ * to end the read cycle of the flash.
+ *
+ * Read data from a flash page. The length to be read must be between 0 and
+ * (page_size + oob_size + wear_size), ie. 532, and a multiple of 4 (because
+ * the extra bytes reading is not implemented).
+ *
+ * As pages are grouped by 2 (in 2 planes), reading from a page must be done
+ * in two steps:
+ * - one read of 512 bytes at offset 0
+ * - one read of 512 bytes at offset 512 + 16
+ *
+ * Returns 0 if successful, -EIO if a read error occured.
+ */
+static int doc_read_page_prepare(struct docg3 *docg3, int block0, int block1,
+ int page, int offset)
+{
+ int wear_area = 0, ret = 0;
+
+ doc_dbg("doc_read_page_prepare(blocks=(%d,%d), page=%d, ofsInPage=%d)\n",
+ block0, block1, page, offset);
+ if (offset >= DOC_LAYOUT_WEAR_OFFSET)
+ wear_area = 1;
+ if (!wear_area && offset > (DOC_LAYOUT_PAGE_OOB_SIZE * 2))
+ return -EINVAL;
+
+ doc_set_device_id(docg3, docg3->device_id);
+ ret = doc_reset_seq(docg3);
+ if (ret)
+ goto err;
+
+ /* Program the flash address block and page */
+ ret = doc_read_seek(docg3, block0, block1, page, wear_area, offset);
+ if (ret)
+ goto err;
+
+ doc_flash_command(docg3, DOC_CMD_READ_ALL_PLANES);
+ doc_delay(docg3, 2);
+ doc_wait_ready(docg3);
+
+ doc_flash_command(docg3, DOC_CMD_SET_ADDR_READ);
+ doc_delay(docg3, 1);
+ if (offset >= DOC_LAYOUT_PAGE_SIZE * 2)
+ offset -= 2 * DOC_LAYOUT_PAGE_SIZE;
+ doc_flash_address(docg3, offset >> 2);
+ doc_delay(docg3, 1);
+ doc_wait_ready(docg3);
+
+ doc_flash_command(docg3, DOC_CMD_READ_FLASH);
+
+ return 0;
+err:
+ doc_writeb(docg3, 0, DOC_DATAEND);
+ doc_delay(docg3, 2);
+ return -EIO;
+}
+
+/**
+ * doc_read_page_getbytes - Reads bytes from a prepared page
+ * @docg3: the device
+ * @len: the number of bytes to be read (must be a multiple of 4)
+ * @buf: the buffer to be filled in
+ * @first: 1 if first time read, DOC_READADDRESS should be set
+ *
+ */
+static int doc_read_page_getbytes(struct docg3 *docg3, int len, u_char *buf,
+ int first)
+{
+ doc_read_data_area(docg3, buf, len, first);
+ doc_delay(docg3, 2);
+ return len;
+}
+
+/**
+ * doc_get_hw_bch_syndroms - Get hardware calculated BCH syndroms
+ * @docg3: the device
+ * @syns: the array of 7 integers where the syndroms will be stored
+ */
+static void doc_get_hw_bch_syndroms(struct docg3 *docg3, int *syns)
+{
+ int i;
+
+ for (i = 0; i < DOC_ECC_BCH_SIZE; i++)
+ syns[i] = doc_register_readb(docg3, DOC_BCH_SYNDROM(i));
+}
+
+/**
+ * doc_read_page_finish - Ends reading of a flash page
+ * @docg3: the device
+ *
+ * As a side effect, resets the chip selector to 0. This ensures that after each
+ * read operation, the floor 0 is selected. Therefore, if the systems halts, the
+ * reboot will boot on floor 0, where the IPL is.
+ */
+static void doc_read_page_finish(struct docg3 *docg3)
+{
+ doc_writeb(docg3, 0, DOC_DATAEND);
+ doc_delay(docg3, 2);
+ doc_set_device_id(docg3, 0);
+}
+
+/**
+ * calc_block_sector - Calculate blocks, pages and ofs.
+
+ * @from: offset in flash
+ * @block0: first plane block index calculated
+ * @block1: second plane block index calculated
+ * @page: page calculated
+ * @ofs: offset in page
+ */
+static void calc_block_sector(loff_t from, int *block0, int *block1, int *page,
+ int *ofs)
+{
+ uint sector;
+
+ sector = from / DOC_LAYOUT_PAGE_SIZE;
+ *block0 = sector / (DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_NBPLANES)
+ * DOC_LAYOUT_NBPLANES;
+ *block1 = *block0 + 1;
+ *page = sector % (DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_NBPLANES);
+ *page /= DOC_LAYOUT_NBPLANES;
+ if (sector % 2)
+ *ofs = DOC_LAYOUT_PAGE_OOB_SIZE;
+ else
+ *ofs = 0;
+}
+
+/**
+ * doc_read - Read bytes from flash
+ * @mtd: the device
+ * @from: the offset from first block and first page, in bytes, aligned on page
+ * size
+ * @len: the number of bytes to read (must be a multiple of 4)
+ * @retlen: the number of bytes actually read
+ * @buf: the filled in buffer
+ *
+ * Reads flash memory pages. This function does not read the OOB chunk, but only
+ * the page data.
+ *
+ * Returns 0 if read successfull, of -EIO, -EINVAL if an error occured
+ */
+static int doc_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ struct docg3 *docg3 = mtd->priv;
+ int block0, block1, page, readlen, ret, ofs = 0;
+ int syn[DOC_ECC_BCH_SIZE], eccconf1;
+ u8 oob[DOC_LAYOUT_OOB_SIZE];
+
+ ret = -EINVAL;
+ doc_dbg("doc_read(from=%lld, len=%zu, buf=%p)\n", from, len, buf);
+ if (from % DOC_LAYOUT_PAGE_SIZE)
+ goto err;
+ if (len % 4)
+ goto err;
+ calc_block_sector(from, &block0, &block1, &page, &ofs);
+ if (block1 > docg3->max_block)
+ goto err;
+
+ *retlen = 0;
+ ret = 0;
+ readlen = min_t(size_t, len, (size_t)DOC_LAYOUT_PAGE_SIZE);
+ while (!ret && len > 0) {
+ readlen = min_t(size_t, len, (size_t)DOC_LAYOUT_PAGE_SIZE);
+ ret = doc_read_page_prepare(docg3, block0, block1, page, ofs);
+ if (ret < 0)
+ goto err;
+ ret = doc_read_page_ecc_init(docg3, DOC_ECC_BCH_COVERED_BYTES);
+ if (ret < 0)
+ goto err_in_read;
+ ret = doc_read_page_getbytes(docg3, readlen, buf, 1);
+ if (ret < readlen)
+ goto err_in_read;
+ ret = doc_read_page_getbytes(docg3, DOC_LAYOUT_OOB_SIZE,
+ oob, 0);
+ if (ret < DOC_LAYOUT_OOB_SIZE)
+ goto err_in_read;
+
+ *retlen += readlen;
+ buf += readlen;
+ len -= readlen;
+
+ ofs ^= DOC_LAYOUT_PAGE_OOB_SIZE;
+ if (ofs == 0)
+ page += 2;
+ if (page > DOC_ADDR_PAGE_MASK) {
+ page = 0;
+ block0 += 2;
+ block1 += 2;
+ }
+
+ /*
+ * There should be a BCH bitstream fixing algorithm here ...
+ * By now, a page read failure is triggered by BCH error
+ */
+ doc_get_hw_bch_syndroms(docg3, syn);
+ eccconf1 = doc_register_readb(docg3, DOC_ECCCONF1);
+
+ doc_dbg("OOB - INFO: %02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
+ oob[0], oob[1], oob[2], oob[3], oob[4],
+ oob[5], oob[6]);
+ doc_dbg("OOB - HAMMING: %02x\n", oob[7]);
+ doc_dbg("OOB - BCH_ECC: %02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
+ oob[8], oob[9], oob[10], oob[11], oob[12],
+ oob[13], oob[14]);
+ doc_dbg("OOB - UNUSED: %02x\n", oob[15]);
+ doc_dbg("ECC checks: ECCConf1=%x\n", eccconf1);
+ doc_dbg("ECC BCH syndrom: %02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
+ syn[0], syn[1], syn[2], syn[3], syn[4], syn[5], syn[6]);
+
+ ret = -EBADMSG;
+ if (block0 >= DOC_LAYOUT_BLOCK_FIRST_DATA) {
+ if (eccconf1 & DOC_ECCCONF1_BCH_SYNDROM_ERR)
+ goto err_in_read;
+ if (is_prot_seq_error(docg3))
+ goto err_in_read;
+ }
+ doc_read_page_finish(docg3);
+ }
+
+ return 0;
+err_in_read:
+ doc_read_page_finish(docg3);
+err:
+ return ret;
+}
+
+/**
+ * doc_read_oob - Read out of band bytes from flash
+ * @mtd: the device
+ * @from: the offset from first block and first page, in bytes, aligned on page
+ * size
+ * @ops: the mtd oob structure
+ *
+ * Reads flash memory OOB area of pages.
+ *
+ * Returns 0 if read successfull, of -EIO, -EINVAL if an error occured
+ */
+static int doc_read_oob(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops)
+{
+ struct docg3 *docg3 = mtd->priv;
+ int block0, block1, page, ofs, ret;
+ u8 *buf = ops->oobbuf;
+ size_t len = ops->ooblen;
+
+ doc_dbg("doc_read_oob(from=%lld, buf=%p, len=%zu)\n", from, buf, len);
+ if (len != DOC_LAYOUT_OOB_SIZE)
+ return -EINVAL;
+
+ switch (ops->mode) {
+ case MTD_OPS_PLACE_OOB:
+ buf += ops->ooboffs;
+ break;
+ default:
+ break;
+ }
+
+ calc_block_sector(from, &block0, &block1, &page, &ofs);
+ if (block1 > docg3->max_block)
+ return -EINVAL;
+
+ ret = doc_read_page_prepare(docg3, block0, block1, page,
+ ofs + DOC_LAYOUT_PAGE_SIZE);
+ if (!ret)
+ ret = doc_read_page_ecc_init(docg3, DOC_LAYOUT_OOB_SIZE);
+ if (!ret)
+ ret = doc_read_page_getbytes(docg3, DOC_LAYOUT_OOB_SIZE,
+ buf, 1);
+ doc_read_page_finish(docg3);
+
+ if (ret > 0)
+ ops->oobretlen = ret;
+ else
+ ops->oobretlen = 0;
+ return (ret > 0) ? 0 : ret;
+}
+
+static int doc_reload_bbt(struct docg3 *docg3)
+{
+ int block = DOC_LAYOUT_BLOCK_BBT;
+ int ret = 0, nbpages, page;
+ u_char *buf = docg3->bbt;
+
+ nbpages = DIV_ROUND_UP(docg3->max_block + 1, 8 * DOC_LAYOUT_PAGE_SIZE);
+ for (page = 0; !ret && (page < nbpages); page++) {
+ ret = doc_read_page_prepare(docg3, block, block + 1,
+ page + DOC_LAYOUT_PAGE_BBT, 0);
+ if (!ret)
+ ret = doc_read_page_ecc_init(docg3,
+ DOC_LAYOUT_PAGE_SIZE);
+ if (!ret)
+ doc_read_page_getbytes(docg3, DOC_LAYOUT_PAGE_SIZE,
+ buf, 1);
+ buf += DOC_LAYOUT_PAGE_SIZE;
+ }
+ doc_read_page_finish(docg3);
+ return ret;
+}
+
+/**
+ * doc_block_isbad - Checks whether a block is good or not
+ * @mtd: the device
+ * @from: the offset to find the correct block
+ *
+ * Returns 1 if block is bad, 0 if block is good
+ */
+static int doc_block_isbad(struct mtd_info *mtd, loff_t from)
+{
+ struct docg3 *docg3 = mtd->priv;
+ int block0, block1, page, ofs, is_good;
+
+ calc_block_sector(from, &block0, &block1, &page, &ofs);
+ doc_dbg("doc_block_isbad(from=%lld) => block=(%d,%d), page=%d, ofs=%d\n",
+ from, block0, block1, page, ofs);
+
+ if (block0 < DOC_LAYOUT_BLOCK_FIRST_DATA)
+ return 0;
+ if (block1 > docg3->max_block)
+ return -EINVAL;
+
+ is_good = docg3->bbt[block0 >> 3] & (1 << (block0 & 0x7));
+ return !is_good;
+}
+
+/**
+ * doc_get_erase_count - Get block erase count
+ * @docg3: the device
+ * @from: the offset in which the block is.
+ *
+ * Get the number of times a block was erased. The number is the maximum of
+ * erase times between first and second plane (which should be equal normally).
+ *
+ * Returns The number of erases, or -EINVAL or -EIO on error.
+ */
+static int doc_get_erase_count(struct docg3 *docg3, loff_t from)
+{
+ u8 buf[DOC_LAYOUT_WEAR_SIZE];
+ int ret, plane1_erase_count, plane2_erase_count;
+ int block0, block1, page, ofs;
+
+ doc_dbg("doc_get_erase_count(from=%lld, buf=%p)\n", from, buf);
+ if (from % DOC_LAYOUT_PAGE_SIZE)
+ return -EINVAL;
+ calc_block_sector(from, &block0, &block1, &page, &ofs);
+ if (block1 > docg3->max_block)
+ return -EINVAL;
+
+ ret = doc_reset_seq(docg3);
+ if (!ret)
+ ret = doc_read_page_prepare(docg3, block0, block1, page,
+ ofs + DOC_LAYOUT_WEAR_OFFSET);
+ if (!ret)
+ ret = doc_read_page_getbytes(docg3, DOC_LAYOUT_WEAR_SIZE,
+ buf, 1);
+ doc_read_page_finish(docg3);
+
+ if (ret || (buf[0] != DOC_ERASE_MARK) || (buf[2] != DOC_ERASE_MARK))
+ return -EIO;
+ plane1_erase_count = (u8)(~buf[1]) | ((u8)(~buf[4]) << 8)
+ | ((u8)(~buf[5]) << 16);
+ plane2_erase_count = (u8)(~buf[3]) | ((u8)(~buf[6]) << 8)
+ | ((u8)(~buf[7]) << 16);
+
+ return max(plane1_erase_count, plane2_erase_count);
+}
+
+/*
+ * Debug sysfs entries
+ */
+static int dbg_flashctrl_show(struct seq_file *s, void *p)
+{
+ struct docg3 *docg3 = (struct docg3 *)s->private;
+
+ int pos = 0;
+ u8 fctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+
+ pos += seq_printf(s,
+ "FlashControl : 0x%02x (%s,CE# %s,%s,%s,flash %s)\n",
+ fctrl,
+ fctrl & DOC_CTRL_VIOLATION ? "protocol violation" : "-",
+ fctrl & DOC_CTRL_CE ? "active" : "inactive",
+ fctrl & DOC_CTRL_PROTECTION_ERROR ? "protection error" : "-",
+ fctrl & DOC_CTRL_SEQUENCE_ERROR ? "sequence error" : "-",
+ fctrl & DOC_CTRL_FLASHREADY ? "ready" : "not ready");
+ return pos;
+}
+DEBUGFS_RO_ATTR(flashcontrol, dbg_flashctrl_show);
+
+static int dbg_asicmode_show(struct seq_file *s, void *p)
+{
+ struct docg3 *docg3 = (struct docg3 *)s->private;
+
+ int pos = 0;
+ int pctrl = doc_register_readb(docg3, DOC_ASICMODE);
+ int mode = pctrl & 0x03;
+
+ pos += seq_printf(s,
+ "%04x : RAM_WE=%d,RSTIN_RESET=%d,BDETCT_RESET=%d,WRITE_ENABLE=%d,POWERDOWN=%d,MODE=%d%d (",
+ pctrl,
+ pctrl & DOC_ASICMODE_RAM_WE ? 1 : 0,
+ pctrl & DOC_ASICMODE_RSTIN_RESET ? 1 : 0,
+ pctrl & DOC_ASICMODE_BDETCT_RESET ? 1 : 0,
+ pctrl & DOC_ASICMODE_MDWREN ? 1 : 0,
+ pctrl & DOC_ASICMODE_POWERDOWN ? 1 : 0,
+ mode >> 1, mode & 0x1);
+
+ switch (mode) {
+ case DOC_ASICMODE_RESET:
+ pos += seq_printf(s, "reset");
+ break;
+ case DOC_ASICMODE_NORMAL:
+ pos += seq_printf(s, "normal");
+ break;
+ case DOC_ASICMODE_POWERDOWN:
+ pos += seq_printf(s, "powerdown");
+ break;
+ }
+ pos += seq_printf(s, ")\n");
+ return pos;
+}
+DEBUGFS_RO_ATTR(asic_mode, dbg_asicmode_show);
+
+static int dbg_device_id_show(struct seq_file *s, void *p)
+{
+ struct docg3 *docg3 = (struct docg3 *)s->private;
+ int pos = 0;
+ int id = doc_register_readb(docg3, DOC_DEVICESELECT);
+
+ pos += seq_printf(s, "DeviceId = %d\n", id);
+ return pos;
+}
+DEBUGFS_RO_ATTR(device_id, dbg_device_id_show);
+
+static int dbg_protection_show(struct seq_file *s, void *p)
+{
+ struct docg3 *docg3 = (struct docg3 *)s->private;
+ int pos = 0;
+ int protect = doc_register_readb(docg3, DOC_PROTECTION);
+ int dps0 = doc_register_readb(docg3, DOC_DPS0_STATUS);
+ int dps0_low = doc_register_readb(docg3, DOC_DPS0_ADDRLOW);
+ int dps0_high = doc_register_readb(docg3, DOC_DPS0_ADDRHIGH);
+ int dps1 = doc_register_readb(docg3, DOC_DPS1_STATUS);
+ int dps1_low = doc_register_readb(docg3, DOC_DPS1_ADDRLOW);
+ int dps1_high = doc_register_readb(docg3, DOC_DPS1_ADDRHIGH);
+
+ pos += seq_printf(s, "Protection = 0x%02x (",
+ protect);
+ if (protect & DOC_PROTECT_FOUNDRY_OTP_LOCK)
+ pos += seq_printf(s, "FOUNDRY_OTP_LOCK,");
+ if (protect & DOC_PROTECT_CUSTOMER_OTP_LOCK)
+ pos += seq_printf(s, "CUSTOMER_OTP_LOCK,");
+ if (protect & DOC_PROTECT_LOCK_INPUT)
+ pos += seq_printf(s, "LOCK_INPUT,");
+ if (protect & DOC_PROTECT_STICKY_LOCK)
+ pos += seq_printf(s, "STICKY_LOCK,");
+ if (protect & DOC_PROTECT_PROTECTION_ENABLED)
+ pos += seq_printf(s, "PROTECTION ON,");
+ if (protect & DOC_PROTECT_IPL_DOWNLOAD_LOCK)
+ pos += seq_printf(s, "IPL_DOWNLOAD_LOCK,");
+ if (protect & DOC_PROTECT_PROTECTION_ERROR)
+ pos += seq_printf(s, "PROTECT_ERR,");
+ else
+ pos += seq_printf(s, "NO_PROTECT_ERR");
+ pos += seq_printf(s, ")\n");
+
+ pos += seq_printf(s, "DPS0 = 0x%02x : "
+ "Protected area [0x%x - 0x%x] : OTP=%d, READ=%d, "
+ "WRITE=%d, HW_LOCK=%d, KEY_OK=%d\n",
+ dps0, dps0_low, dps0_high,
+ !!(dps0 & DOC_DPS_OTP_PROTECTED),
+ !!(dps0 & DOC_DPS_READ_PROTECTED),
+ !!(dps0 & DOC_DPS_WRITE_PROTECTED),
+ !!(dps0 & DOC_DPS_HW_LOCK_ENABLED),
+ !!(dps0 & DOC_DPS_KEY_OK));
+ pos += seq_printf(s, "DPS1 = 0x%02x : "
+ "Protected area [0x%x - 0x%x] : OTP=%d, READ=%d, "
+ "WRITE=%d, HW_LOCK=%d, KEY_OK=%d\n",
+ dps1, dps1_low, dps1_high,
+ !!(dps1 & DOC_DPS_OTP_PROTECTED),
+ !!(dps1 & DOC_DPS_READ_PROTECTED),
+ !!(dps1 & DOC_DPS_WRITE_PROTECTED),
+ !!(dps1 & DOC_DPS_HW_LOCK_ENABLED),
+ !!(dps1 & DOC_DPS_KEY_OK));
+ return pos;
+}
+DEBUGFS_RO_ATTR(protection, dbg_protection_show);
+
+static int __init doc_dbg_register(struct docg3 *docg3)
+{
+ struct dentry *root, *entry;
+
+ root = debugfs_create_dir("docg3", NULL);
+ if (!root)
+ return -ENOMEM;
+
+ entry = debugfs_create_file("flashcontrol", S_IRUSR, root, docg3,
+ &flashcontrol_fops);
+ if (entry)
+ entry = debugfs_create_file("asic_mode", S_IRUSR, root,
+ docg3, &asic_mode_fops);
+ if (entry)
+ entry = debugfs_create_file("device_id", S_IRUSR, root,
+ docg3, &device_id_fops);
+ if (entry)
+ entry = debugfs_create_file("protection", S_IRUSR, root,
+ docg3, &protection_fops);
+ if (entry) {
+ docg3->debugfs_root = root;
+ return 0;
+ } else {
+ debugfs_remove_recursive(root);
+ return -ENOMEM;
+ }
+}
+
+static void __exit doc_dbg_unregister(struct docg3 *docg3)
+{
+ debugfs_remove_recursive(docg3->debugfs_root);
+}
+
+/**
+ * doc_set_driver_info - Fill the mtd_info structure and docg3 structure
+ * @chip_id: The chip ID of the supported chip
+ * @mtd: The structure to fill
+ */
+static void __init doc_set_driver_info(int chip_id, struct mtd_info *mtd)
+{
+ struct docg3 *docg3 = mtd->priv;
+ int cfg;
+
+ cfg = doc_register_readb(docg3, DOC_CONFIGURATION);
+ docg3->if_cfg = (cfg & DOC_CONF_IF_CFG ? 1 : 0);
+
+ switch (chip_id) {
+ case DOC_CHIPID_G3:
+ mtd->name = "DiskOnChip G3";
+ docg3->max_block = 2047;
+ break;
+ }
+ mtd->type = MTD_NANDFLASH;
+ /*
+ * Once write methods are added, the correct flags will be set.
+ * mtd->flags = MTD_CAP_NANDFLASH;
+ */
+ mtd->flags = MTD_CAP_ROM;
+ mtd->size = (docg3->max_block + 1) * DOC_LAYOUT_BLOCK_SIZE;
+ mtd->erasesize = DOC_LAYOUT_BLOCK_SIZE * DOC_LAYOUT_NBPLANES;
+ mtd->writesize = DOC_LAYOUT_PAGE_SIZE;
+ mtd->oobsize = DOC_LAYOUT_OOB_SIZE;
+ mtd->owner = THIS_MODULE;
+ mtd->erase = NULL;
+ mtd->point = NULL;
+ mtd->unpoint = NULL;
+ mtd->read = doc_read;
+ mtd->write = NULL;
+ mtd->read_oob = doc_read_oob;
+ mtd->write_oob = NULL;
+ mtd->sync = NULL;
+ mtd->block_isbad = doc_block_isbad;
+}
+
+/**
+ * doc_probe - Probe the IO space for a DiskOnChip G3 chip
+ * @pdev: platform device
+ *
+ * Probes for a G3 chip at the specified IO space in the platform data
+ * ressources.
+ *
+ * Returns 0 on success, -ENOMEM, -ENXIO on error
+ */
+static int __init docg3_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct docg3 *docg3;
+ struct mtd_info *mtd;
+ struct resource *ress;
+ int ret, bbt_nbpages;
+ u16 chip_id, chip_id_inv;
+
+ ret = -ENOMEM;
+ docg3 = kzalloc(sizeof(struct docg3), GFP_KERNEL);
+ if (!docg3)
+ goto nomem1;
+ mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
+ if (!mtd)
+ goto nomem2;
+ mtd->priv = docg3;
+
+ ret = -ENXIO;
+ ress = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!ress) {
+ dev_err(dev, "No I/O memory resource defined\n");
+ goto noress;
+ }
+ docg3->base = ioremap(ress->start, DOC_IOSPACE_SIZE);
+
+ docg3->dev = &pdev->dev;
+ docg3->device_id = 0;
+ doc_set_device_id(docg3, docg3->device_id);
+ doc_set_asic_mode(docg3, DOC_ASICMODE_RESET);
+ doc_set_asic_mode(docg3, DOC_ASICMODE_NORMAL);
+
+ chip_id = doc_register_readw(docg3, DOC_CHIPID);
+ chip_id_inv = doc_register_readw(docg3, DOC_CHIPID_INV);
+
+ ret = -ENODEV;
+ if (chip_id != (u16)(~chip_id_inv)) {
+ doc_info("No device found at IO addr %p\n",
+ (void *)ress->start);
+ goto nochipfound;
+ }
+
+ switch (chip_id) {
+ case DOC_CHIPID_G3:
+ doc_info("Found a G3 DiskOnChip at addr %p\n",
+ (void *)ress->start);
+ break;
+ default:
+ doc_err("Chip id %04x is not a DiskOnChip G3 chip\n", chip_id);
+ goto nochipfound;
+ }
+
+ doc_set_driver_info(chip_id, mtd);
+ platform_set_drvdata(pdev, mtd);
+
+ ret = -ENOMEM;
+ bbt_nbpages = DIV_ROUND_UP(docg3->max_block + 1,
+ 8 * DOC_LAYOUT_PAGE_SIZE);
+ docg3->bbt = kzalloc(bbt_nbpages * DOC_LAYOUT_PAGE_SIZE, GFP_KERNEL);
+ if (!docg3->bbt)
+ goto nochipfound;
+ doc_reload_bbt(docg3);
+
+ ret = mtd_device_parse_register(mtd, part_probes,
+ NULL, NULL, 0);
+ if (ret)
+ goto register_error;
+
+ doc_dbg_register(docg3);
+ return 0;
+
+register_error:
+ kfree(docg3->bbt);
+nochipfound:
+ iounmap(docg3->base);
+noress:
+ kfree(mtd);
+nomem2:
+ kfree(docg3);
+nomem1:
+ return ret;
+}
+
+/**
+ * docg3_release - Release the driver
+ * @pdev: the platform device
+ *
+ * Returns 0
+ */
+static int __exit docg3_release(struct platform_device *pdev)
+{
+ struct mtd_info *mtd = platform_get_drvdata(pdev);
+ struct docg3 *docg3 = mtd->priv;
+
+ doc_dbg_unregister(docg3);
+ mtd_device_unregister(mtd);
+ iounmap(docg3->base);
+ kfree(docg3->bbt);
+ kfree(docg3);
+ kfree(mtd);
+ return 0;
+}
+
+static struct platform_driver g3_driver = {
+ .driver = {
+ .name = "docg3",
+ .owner = THIS_MODULE,
+ },
+ .remove = __exit_p(docg3_release),
+};
+
+static int __init docg3_init(void)
+{
+ return platform_driver_probe(&g3_driver, docg3_probe);
+}
+module_init(docg3_init);
+
+
+static void __exit docg3_exit(void)
+{
+ platform_driver_unregister(&g3_driver);
+}
+module_exit(docg3_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Robert Jarzmik <robert.jarzmik@free.fr>");
+MODULE_DESCRIPTION("MTD driver for DiskOnChip G3");
--- /dev/null
+/*
+ * Handles the M-Systems DiskOnChip G3 chip
+ *
+ * Copyright (C) 2011 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef _MTD_DOCG3_H
+#define _MTD_DOCG3_H
+
+/*
+ * Flash memory areas :
+ * - 0x0000 .. 0x07ff : IPL
+ * - 0x0800 .. 0x0fff : Data area
+ * - 0x1000 .. 0x17ff : Registers
+ * - 0x1800 .. 0x1fff : Unknown
+ */
+#define DOC_IOSPACE_IPL 0x0000
+#define DOC_IOSPACE_DATA 0x0800
+#define DOC_IOSPACE_SIZE 0x2000
+
+/*
+ * DOC G3 layout and adressing scheme
+ * A page address for the block "b", plane "P" and page "p":
+ * address = [bbbb bPpp pppp]
+ */
+
+#define DOC_ADDR_PAGE_MASK 0x3f
+#define DOC_ADDR_BLOCK_SHIFT 6
+#define DOC_LAYOUT_NBPLANES 2
+#define DOC_LAYOUT_PAGES_PER_BLOCK 64
+#define DOC_LAYOUT_PAGE_SIZE 512
+#define DOC_LAYOUT_OOB_SIZE 16
+#define DOC_LAYOUT_WEAR_SIZE 8
+#define DOC_LAYOUT_PAGE_OOB_SIZE \
+ (DOC_LAYOUT_PAGE_SIZE + DOC_LAYOUT_OOB_SIZE)
+#define DOC_LAYOUT_WEAR_OFFSET (DOC_LAYOUT_PAGE_OOB_SIZE * 2)
+#define DOC_LAYOUT_BLOCK_SIZE \
+ (DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_PAGE_SIZE)
+#define DOC_ECC_BCH_SIZE 7
+#define DOC_ECC_BCH_COVERED_BYTES \
+ (DOC_LAYOUT_PAGE_SIZE + DOC_LAYOUT_OOB_PAGEINFO_SZ + \
+ DOC_LAYOUT_OOB_HAMMING_SZ + DOC_LAYOUT_OOB_BCH_SZ)
+
+/*
+ * Blocks distribution
+ */
+#define DOC_LAYOUT_BLOCK_BBT 0
+#define DOC_LAYOUT_BLOCK_OTP 0
+#define DOC_LAYOUT_BLOCK_FIRST_DATA 6
+
+#define DOC_LAYOUT_PAGE_BBT 4
+
+/*
+ * Extra page OOB (16 bytes wide) layout
+ */
+#define DOC_LAYOUT_OOB_PAGEINFO_OFS 0
+#define DOC_LAYOUT_OOB_HAMMING_OFS 7
+#define DOC_LAYOUT_OOB_BCH_OFS 8
+#define DOC_LAYOUT_OOB_UNUSED_OFS 15
+#define DOC_LAYOUT_OOB_PAGEINFO_SZ 7
+#define DOC_LAYOUT_OOB_HAMMING_SZ 1
+#define DOC_LAYOUT_OOB_BCH_SZ 7
+#define DOC_LAYOUT_OOB_UNUSED_SZ 1
+
+
+#define DOC_CHIPID_G3 0x200
+#define DOC_ERASE_MARK 0xaa
+/*
+ * Flash registers
+ */
+#define DOC_CHIPID 0x1000
+#define DOC_TEST 0x1004
+#define DOC_BUSLOCK 0x1006
+#define DOC_ENDIANCONTROL 0x1008
+#define DOC_DEVICESELECT 0x100a
+#define DOC_ASICMODE 0x100c
+#define DOC_CONFIGURATION 0x100e
+#define DOC_INTERRUPTCONTROL 0x1010
+#define DOC_READADDRESS 0x101a
+#define DOC_DATAEND 0x101e
+#define DOC_INTERRUPTSTATUS 0x1020
+
+#define DOC_FLASHSEQUENCE 0x1032
+#define DOC_FLASHCOMMAND 0x1034
+#define DOC_FLASHADDRESS 0x1036
+#define DOC_FLASHCONTROL 0x1038
+#define DOC_NOP 0x103e
+
+#define DOC_ECCCONF0 0x1040
+#define DOC_ECCCONF1 0x1042
+#define DOC_ECCPRESET 0x1044
+#define DOC_HAMMINGPARITY 0x1046
+#define DOC_BCH_SYNDROM(idx) (0x1048 + (idx << 1))
+
+#define DOC_PROTECTION 0x1056
+#define DOC_DPS0_ADDRLOW 0x1060
+#define DOC_DPS0_ADDRHIGH 0x1062
+#define DOC_DPS1_ADDRLOW 0x1064
+#define DOC_DPS1_ADDRHIGH 0x1066
+#define DOC_DPS0_STATUS 0x106c
+#define DOC_DPS1_STATUS 0x106e
+
+#define DOC_ASICMODECONFIRM 0x1072
+#define DOC_CHIPID_INV 0x1074
+
+/*
+ * Flash sequences
+ * A sequence is preset before one or more commands are input to the chip.
+ */
+#define DOC_SEQ_RESET 0x00
+#define DOC_SEQ_PAGE_SIZE_532 0x03
+#define DOC_SEQ_SET_MODE 0x09
+#define DOC_SEQ_READ 0x12
+#define DOC_SEQ_SET_PLANE1 0x0e
+#define DOC_SEQ_SET_PLANE2 0x10
+#define DOC_SEQ_PAGE_SETUP 0x1d
+
+/*
+ * Flash commands
+ */
+#define DOC_CMD_READ_PLANE1 0x00
+#define DOC_CMD_SET_ADDR_READ 0x05
+#define DOC_CMD_READ_ALL_PLANES 0x30
+#define DOC_CMD_READ_PLANE2 0x50
+#define DOC_CMD_READ_FLASH 0xe0
+#define DOC_CMD_PAGE_SIZE_532 0x3c
+
+#define DOC_CMD_PROG_BLOCK_ADDR 0x60
+#define DOC_CMD_PROG_CYCLE1 0x80
+#define DOC_CMD_PROG_CYCLE2 0x10
+#define DOC_CMD_ERASECYCLE2 0xd0
+
+#define DOC_CMD_RELIABLE_MODE 0x22
+#define DOC_CMD_FAST_MODE 0xa2
+
+#define DOC_CMD_RESET 0xff
+
+/*
+ * Flash register : DOC_FLASHCONTROL
+ */
+#define DOC_CTRL_VIOLATION 0x20
+#define DOC_CTRL_CE 0x10
+#define DOC_CTRL_UNKNOWN_BITS 0x08
+#define DOC_CTRL_PROTECTION_ERROR 0x04
+#define DOC_CTRL_SEQUENCE_ERROR 0x02
+#define DOC_CTRL_FLASHREADY 0x01
+
+/*
+ * Flash register : DOC_ASICMODE
+ */
+#define DOC_ASICMODE_RESET 0x00
+#define DOC_ASICMODE_NORMAL 0x01
+#define DOC_ASICMODE_POWERDOWN 0x02
+#define DOC_ASICMODE_MDWREN 0x04
+#define DOC_ASICMODE_BDETCT_RESET 0x08
+#define DOC_ASICMODE_RSTIN_RESET 0x10
+#define DOC_ASICMODE_RAM_WE 0x20
+
+/*
+ * Flash register : DOC_ECCCONF0
+ */
+#define DOC_ECCCONF0_READ_MODE 0x8000
+#define DOC_ECCCONF0_AUTO_ECC_ENABLE 0x4000
+#define DOC_ECCCONF0_HAMMING_ENABLE 0x1000
+#define DOC_ECCCONF0_BCH_ENABLE 0x0800
+#define DOC_ECCCONF0_DATA_BYTES_MASK 0x07ff
+
+/*
+ * Flash register : DOC_ECCCONF1
+ */
+#define DOC_ECCCONF1_BCH_SYNDROM_ERR 0x80
+#define DOC_ECCCONF1_UNKOWN1 0x40
+#define DOC_ECCCONF1_UNKOWN2 0x20
+#define DOC_ECCCONF1_UNKOWN3 0x10
+#define DOC_ECCCONF1_HAMMING_BITS_MASK 0x0f
+
+/*
+ * Flash register : DOC_PROTECTION
+ */
+#define DOC_PROTECT_FOUNDRY_OTP_LOCK 0x01
+#define DOC_PROTECT_CUSTOMER_OTP_LOCK 0x02
+#define DOC_PROTECT_LOCK_INPUT 0x04
+#define DOC_PROTECT_STICKY_LOCK 0x08
+#define DOC_PROTECT_PROTECTION_ENABLED 0x10
+#define DOC_PROTECT_IPL_DOWNLOAD_LOCK 0x20
+#define DOC_PROTECT_PROTECTION_ERROR 0x80
+
+/*
+ * Flash register : DOC_DPS0_STATUS and DOC_DPS1_STATUS
+ */
+#define DOC_DPS_OTP_PROTECTED 0x01
+#define DOC_DPS_READ_PROTECTED 0x02
+#define DOC_DPS_WRITE_PROTECTED 0x04
+#define DOC_DPS_HW_LOCK_ENABLED 0x08
+#define DOC_DPS_KEY_OK 0x80
+
+/*
+ * Flash register : DOC_CONFIGURATION
+ */
+#define DOC_CONF_IF_CFG 0x80
+#define DOC_CONF_MAX_ID_MASK 0x30
+#define DOC_CONF_VCCQ_3V 0x01
+
+/*
+ * Flash register : DOC_READADDRESS
+ */
+#define DOC_READADDR_INC 0x8000
+#define DOC_READADDR_ONE_BYTE 0x4000
+#define DOC_READADDR_ADDR_MASK 0x1fff
+
+/**
+ * struct docg3 - DiskOnChip driver private data
+ * @dev: the device currently under control
+ * @base: mapped IO space
+ * @device_id: number of the cascaded DoCG3 device (0, 1, 2 or 3)
+ * @if_cfg: if true, reads are on 16bits, else reads are on 8bits
+ * @bbt: bad block table cache
+ * @debugfs_root: debugfs root node
+ */
+struct docg3 {
+ struct device *dev;
+ void __iomem *base;
+ unsigned int device_id:4;
+ unsigned int if_cfg:1;
+ int max_block;
+ u8 *bbt;
+ struct dentry *debugfs_root;
+};
+
+#define doc_err(fmt, arg...) dev_err(docg3->dev, (fmt), ## arg)
+#define doc_info(fmt, arg...) dev_info(docg3->dev, (fmt), ## arg)
+#define doc_dbg(fmt, arg...) dev_dbg(docg3->dev, (fmt), ## arg)
+#define doc_vdbg(fmt, arg...) dev_vdbg(docg3->dev, (fmt), ## arg)
+
+#define DEBUGFS_RO_ATTR(name, show_fct) \
+ static int name##_open(struct inode *inode, struct file *file) \
+ { return single_open(file, show_fct, inode->i_private); } \
+ static const struct file_operations name##_fops = { \
+ .owner = THIS_MODULE, \
+ .open = name##_open, \
+ .llseek = seq_lseek, \
+ .read = seq_read, \
+ .release = single_release \
+ };
+#endif
+
+/*
+ * Trace events part
+ */
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM docg3
+
+#if !defined(_MTD_DOCG3_TRACE) || defined(TRACE_HEADER_MULTI_READ)
+#define _MTD_DOCG3_TRACE
+
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(docg3_io,
+ TP_PROTO(int op, int width, u16 reg, int val),
+ TP_ARGS(op, width, reg, val),
+ TP_STRUCT__entry(
+ __field(int, op)
+ __field(unsigned char, width)
+ __field(u16, reg)
+ __field(int, val)),
+ TP_fast_assign(
+ __entry->op = op;
+ __entry->width = width;
+ __entry->reg = reg;
+ __entry->val = val;),
+ TP_printk("docg3: %s%02d reg=%04x, val=%04x",
+ __entry->op ? "write" : "read", __entry->width,
+ __entry->reg, __entry->val)
+ );
+#endif
+
+/* This part must be outside protection */
+#undef TRACE_INCLUDE_PATH
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_FILE docg3
+#include <trace/define_trace.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/doc2000.h>
-/* Where to look for the devices? */
-#ifndef CONFIG_MTD_DOCPROBE_ADDRESS
-#define CONFIG_MTD_DOCPROBE_ADDRESS 0
-#endif
-
static unsigned long doc_config_location = CONFIG_MTD_DOCPROBE_ADDRESS;
module_param(doc_config_location, ulong, 0);
/* debugging */
//#define LART_DEBUG
-/* partition support */
-#define HAVE_PARTITIONS
-
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mtd/mtd.h>
-#ifdef HAVE_PARTITIONS
#include <linux/mtd/partitions.h>
-#endif
#ifndef CONFIG_SA1100_LART
#error This is for LART architecture only
}
};
-#ifdef HAVE_PARTITIONS
static struct mtd_partition lart_partitions[] = {
/* blob */
{
.size = INITRD_LEN, /* MTDPART_SIZ_FULL */
}
};
-#endif
+#define NUM_PARTITIONS ARRAY_SIZE(lart_partitions)
static int __init lart_flash_init (void)
{
result,mtd.eraseregions[result].erasesize,mtd.eraseregions[result].erasesize / 1024,
result,mtd.eraseregions[result].numblocks);
-#ifdef HAVE_PARTITIONS
printk ("\npartitions = %d\n", ARRAY_SIZE(lart_partitions));
for (result = 0; result < ARRAY_SIZE(lart_partitions); result++)
result,lart_partitions[result].offset,
result,lart_partitions[result].size,lart_partitions[result].size / 1024);
#endif
-#endif
-#ifndef HAVE_PARTITIONS
- result = mtd_device_register(&mtd, NULL, 0);
-#else
result = mtd_device_register(&mtd, lart_partitions,
ARRAY_SIZE(lart_partitions));
-#endif
return (result);
}
static void __exit lart_flash_exit (void)
{
-#ifndef HAVE_PARTITIONS
- mtd_device_unregister(&mtd);
-#else
mtd_device_unregister(&mtd);
-#endif
}
module_init (lart_flash_init);
#include <linux/mtd/cfi.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/of_platform.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
struct spi_device *spi;
struct mutex lock;
struct mtd_info mtd;
- unsigned partitioned:1;
u16 page_size;
u16 addr_width;
u8 erase_opcode;
*/
static int erase_chip(struct m25p *flash)
{
- DEBUG(MTD_DEBUG_LEVEL3, "%s: %s %lldKiB\n",
- dev_name(&flash->spi->dev), __func__,
- (long long)(flash->mtd.size >> 10));
+ pr_debug("%s: %s %lldKiB\n", dev_name(&flash->spi->dev), __func__,
+ (long long)(flash->mtd.size >> 10));
/* Wait until finished previous write command. */
if (wait_till_ready(flash))
*/
static int erase_sector(struct m25p *flash, u32 offset)
{
- DEBUG(MTD_DEBUG_LEVEL3, "%s: %s %dKiB at 0x%08x\n",
- dev_name(&flash->spi->dev), __func__,
- flash->mtd.erasesize / 1024, offset);
+ pr_debug("%s: %s %dKiB at 0x%08x\n", dev_name(&flash->spi->dev),
+ __func__, flash->mtd.erasesize / 1024, offset);
/* Wait until finished previous write command. */
if (wait_till_ready(flash))
u32 addr,len;
uint32_t rem;
- DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%llx, len %lld\n",
- dev_name(&flash->spi->dev), __func__, "at",
- (long long)instr->addr, (long long)instr->len);
+ pr_debug("%s: %s at 0x%llx, len %lld\n", dev_name(&flash->spi->dev),
+ __func__, (long long)instr->addr,
+ (long long)instr->len);
/* sanity checks */
if (instr->addr + instr->len > flash->mtd.size)
struct spi_transfer t[2];
struct spi_message m;
- DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %zd\n",
- dev_name(&flash->spi->dev), __func__, "from",
- (u32)from, len);
+ pr_debug("%s: %s from 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
+ __func__, (u32)from, len);
/* sanity checks */
if (!len)
struct spi_transfer t[2];
struct spi_message m;
- DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %zd\n",
- dev_name(&flash->spi->dev), __func__, "to",
- (u32)to, len);
+ pr_debug("%s: %s to 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
+ __func__, (u32)to, len);
*retlen = 0;
size_t actual;
int cmd_sz, ret;
- DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %zd\n",
- dev_name(&flash->spi->dev), __func__, "to",
- (u32)to, len);
+ pr_debug("%s: %s to 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
+ __func__, (u32)to, len);
*retlen = 0;
{ "at25fs040", INFO(0x1f6604, 0, 64 * 1024, 8, SECT_4K) },
{ "at25df041a", INFO(0x1f4401, 0, 64 * 1024, 8, SECT_4K) },
+ { "at25df321a", INFO(0x1f4701, 0, 64 * 1024, 64, SECT_4K) },
{ "at25df641", INFO(0x1f4800, 0, 64 * 1024, 128, SECT_4K) },
{ "at26f004", INFO(0x1f0400, 0, 64 * 1024, 8, SECT_4K) },
/* EON -- en25xxx */
{ "en25f32", INFO(0x1c3116, 0, 64 * 1024, 64, SECT_4K) },
{ "en25p32", INFO(0x1c2016, 0, 64 * 1024, 64, 0) },
+ { "en25q32b", INFO(0x1c3016, 0, 64 * 1024, 64, 0) },
{ "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
/* Intel/Numonyx -- xxxs33b */
*/
tmp = spi_write_then_read(spi, &code, 1, id, 5);
if (tmp < 0) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n",
- dev_name(&spi->dev), tmp);
+ pr_debug("%s: error %d reading JEDEC ID\n",
+ dev_name(&spi->dev), tmp);
return ERR_PTR(tmp);
}
jedec = id[0];
struct m25p *flash;
struct flash_info *info;
unsigned i;
- struct mtd_partition *parts = NULL;
- int nr_parts = 0;
+ struct mtd_part_parser_data ppdata;
+
+#ifdef CONFIG_MTD_OF_PARTS
+ if (!of_device_is_available(spi->dev.of_node))
+ return -ENODEV;
+#endif
/* Platform data helps sort out which chip type we have, as
* well as how this board partitions it. If we don't have
if (info->flags & M25P_NO_ERASE)
flash->mtd.flags |= MTD_NO_ERASE;
+ ppdata.of_node = spi->dev.of_node;
flash->mtd.dev.parent = &spi->dev;
flash->page_size = info->page_size;
dev_info(&spi->dev, "%s (%lld Kbytes)\n", id->name,
(long long)flash->mtd.size >> 10);
- DEBUG(MTD_DEBUG_LEVEL2,
- "mtd .name = %s, .size = 0x%llx (%lldMiB) "
+ pr_debug("mtd .name = %s, .size = 0x%llx (%lldMiB) "
".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
flash->mtd.name,
(long long)flash->mtd.size, (long long)(flash->mtd.size >> 20),
if (flash->mtd.numeraseregions)
for (i = 0; i < flash->mtd.numeraseregions; i++)
- DEBUG(MTD_DEBUG_LEVEL2,
- "mtd.eraseregions[%d] = { .offset = 0x%llx, "
+ pr_debug("mtd.eraseregions[%d] = { .offset = 0x%llx, "
".erasesize = 0x%.8x (%uKiB), "
".numblocks = %d }\n",
i, (long long)flash->mtd.eraseregions[i].offset,
/* partitions should match sector boundaries; and it may be good to
* use readonly partitions for writeprotected sectors (BP2..BP0).
*/
- if (mtd_has_cmdlinepart()) {
- static const char *part_probes[]
- = { "cmdlinepart", NULL, };
-
- nr_parts = parse_mtd_partitions(&flash->mtd,
- part_probes, &parts, 0);
- }
-
- if (nr_parts <= 0 && data && data->parts) {
- parts = data->parts;
- nr_parts = data->nr_parts;
- }
-
-#ifdef CONFIG_MTD_OF_PARTS
- if (nr_parts <= 0 && spi->dev.of_node) {
- nr_parts = of_mtd_parse_partitions(&spi->dev,
- spi->dev.of_node, &parts);
- }
-#endif
-
- if (nr_parts > 0) {
- for (i = 0; i < nr_parts; i++) {
- DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = "
- "{.name = %s, .offset = 0x%llx, "
- ".size = 0x%llx (%lldKiB) }\n",
- i, parts[i].name,
- (long long)parts[i].offset,
- (long long)parts[i].size,
- (long long)(parts[i].size >> 10));
- }
- flash->partitioned = 1;
- }
-
- return mtd_device_register(&flash->mtd, parts, nr_parts) == 1 ?
- -ENODEV : 0;
+ return mtd_device_parse_register(&flash->mtd, NULL, &ppdata,
+ data ? data->parts : NULL,
+ data ? data->nr_parts : 0);
}
#include <linux/mutex.h>
#include <linux/err.h>
#include <linux/math64.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-
/*
* DataFlash is a kind of SPI flash. Most AT45 chips have two buffers in
* each chip, which may be used for double buffered I/O; but this driver
struct mtd_info mtd;
};
+#ifdef CONFIG_OF
+static const struct of_device_id dataflash_dt_ids[] = {
+ { .compatible = "atmel,at45", },
+ { .compatible = "atmel,dataflash", },
+ { /* sentinel */ }
+};
+#else
+#define dataflash_dt_ids NULL
+#endif
+
/* ......................................................................... */
/*
for (;;) {
status = dataflash_status(spi);
if (status < 0) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: status %d?\n",
+ pr_debug("%s: status %d?\n",
dev_name(&spi->dev), status);
status = 0;
}
uint8_t *command;
uint32_t rem;
- DEBUG(MTD_DEBUG_LEVEL2, "%s: erase addr=0x%llx len 0x%llx\n",
+ pr_debug("%s: erase addr=0x%llx len 0x%llx\n",
dev_name(&spi->dev), (long long)instr->addr,
(long long)instr->len);
command[2] = (uint8_t)(pageaddr >> 8);
command[3] = 0;
- DEBUG(MTD_DEBUG_LEVEL3, "ERASE %s: (%x) %x %x %x [%i]\n",
+ pr_debug("ERASE %s: (%x) %x %x %x [%i]\n",
do_block ? "block" : "page",
command[0], command[1], command[2], command[3],
pageaddr);
uint8_t *command;
int status;
- DEBUG(MTD_DEBUG_LEVEL2, "%s: read 0x%x..0x%x\n",
- dev_name(&priv->spi->dev), (unsigned)from, (unsigned)(from + len));
+ pr_debug("%s: read 0x%x..0x%x\n", dev_name(&priv->spi->dev),
+ (unsigned)from, (unsigned)(from + len));
*retlen = 0;
command = priv->command;
- DEBUG(MTD_DEBUG_LEVEL3, "READ: (%x) %x %x %x\n",
+ pr_debug("READ: (%x) %x %x %x\n",
command[0], command[1], command[2], command[3]);
spi_message_init(&msg);
*retlen = msg.actual_length - 8;
status = 0;
} else
- DEBUG(MTD_DEBUG_LEVEL1, "%s: read %x..%x --> %d\n",
+ pr_debug("%s: read %x..%x --> %d\n",
dev_name(&priv->spi->dev),
(unsigned)from, (unsigned)(from + len),
status);
int status = -EINVAL;
uint8_t *command;
- DEBUG(MTD_DEBUG_LEVEL2, "%s: write 0x%x..0x%x\n",
+ pr_debug("%s: write 0x%x..0x%x\n",
dev_name(&spi->dev), (unsigned)to, (unsigned)(to + len));
*retlen = 0;
mutex_lock(&priv->lock);
while (remaining > 0) {
- DEBUG(MTD_DEBUG_LEVEL3, "write @ %i:%i len=%i\n",
+ pr_debug("write @ %i:%i len=%i\n",
pageaddr, offset, writelen);
/* REVISIT:
command[2] = (addr & 0x0000FF00) >> 8;
command[3] = 0;
- DEBUG(MTD_DEBUG_LEVEL3, "TRANSFER: (%x) %x %x %x\n",
+ pr_debug("TRANSFER: (%x) %x %x %x\n",
command[0], command[1], command[2], command[3]);
status = spi_sync(spi, &msg);
if (status < 0)
- DEBUG(MTD_DEBUG_LEVEL1, "%s: xfer %u -> %d \n",
+ pr_debug("%s: xfer %u -> %d\n",
dev_name(&spi->dev), addr, status);
(void) dataflash_waitready(priv->spi);
command[2] = (addr & 0x0000FF00) >> 8;
command[3] = (addr & 0x000000FF);
- DEBUG(MTD_DEBUG_LEVEL3, "PROGRAM: (%x) %x %x %x\n",
+ pr_debug("PROGRAM: (%x) %x %x %x\n",
command[0], command[1], command[2], command[3]);
x[1].tx_buf = writebuf;
status = spi_sync(spi, &msg);
spi_transfer_del(x + 1);
if (status < 0)
- DEBUG(MTD_DEBUG_LEVEL1, "%s: pgm %u/%u -> %d \n",
+ pr_debug("%s: pgm %u/%u -> %d\n",
dev_name(&spi->dev), addr, writelen, status);
(void) dataflash_waitready(priv->spi);
command[2] = (addr & 0x0000FF00) >> 8;
command[3] = 0;
- DEBUG(MTD_DEBUG_LEVEL3, "COMPARE: (%x) %x %x %x\n",
+ pr_debug("COMPARE: (%x) %x %x %x\n",
command[0], command[1], command[2], command[3]);
status = spi_sync(spi, &msg);
if (status < 0)
- DEBUG(MTD_DEBUG_LEVEL1, "%s: compare %u -> %d \n",
+ pr_debug("%s: compare %u -> %d\n",
dev_name(&spi->dev), addr, status);
status = dataflash_waitready(priv->spi);
{
struct dataflash *priv;
struct mtd_info *device;
+ struct mtd_part_parser_data ppdata;
struct flash_platform_data *pdata = spi->dev.platform_data;
char *otp_tag = "";
int err = 0;
- struct mtd_partition *parts;
- int nr_parts = 0;
priv = kzalloc(sizeof *priv, GFP_KERNEL);
if (!priv)
pagesize, otp_tag);
dev_set_drvdata(&spi->dev, priv);
- if (mtd_has_cmdlinepart()) {
- static const char *part_probes[] = { "cmdlinepart", NULL, };
-
- nr_parts = parse_mtd_partitions(device, part_probes, &parts,
- 0);
- }
+ ppdata.of_node = spi->dev.of_node;
+ err = mtd_device_parse_register(device, NULL, &ppdata,
+ pdata ? pdata->parts : NULL,
+ pdata ? pdata->nr_parts : 0);
- if (nr_parts <= 0 && pdata && pdata->parts) {
- parts = pdata->parts;
- nr_parts = pdata->nr_parts;
- }
-
- if (nr_parts > 0) {
- priv->partitioned = 1;
- err = mtd_device_register(device, parts, nr_parts);
- goto out;
- }
-
- if (mtd_device_register(device, NULL, 0) == 1)
- err = -ENODEV;
-
-out:
if (!err)
return 0;
*/
tmp = spi_write_then_read(spi, &code, 1, id, 3);
if (tmp < 0) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n",
+ pr_debug("%s: error %d reading JEDEC ID\n",
dev_name(&spi->dev), tmp);
return ERR_PTR(tmp);
}
tmp < ARRAY_SIZE(dataflash_data);
tmp++, info++) {
if (info->jedec_id == jedec) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: OTP, sector protect%s\n",
+ pr_debug("%s: OTP, sector protect%s\n",
dev_name(&spi->dev),
(info->flags & SUP_POW2PS)
? ", binary pagesize" : ""
if (info->flags & SUP_POW2PS) {
status = dataflash_status(spi);
if (status < 0) {
- DEBUG(MTD_DEBUG_LEVEL1,
- "%s: status error %d\n",
+ pr_debug("%s: status error %d\n",
dev_name(&spi->dev), status);
return ERR_PTR(status);
}
*/
status = dataflash_status(spi);
if (status <= 0 || status == 0xff) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: status error %d\n",
+ pr_debug("%s: status error %d\n",
dev_name(&spi->dev), status);
if (status == 0 || status == 0xff)
status = -ENODEV;
break;
/* obsolete AT45DB1282 not (yet?) supported */
default:
- DEBUG(MTD_DEBUG_LEVEL1, "%s: unsupported device (%x)\n",
- dev_name(&spi->dev), status & 0x3c);
+ pr_debug("%s: unsupported device (%x)\n", dev_name(&spi->dev),
+ status & 0x3c);
status = -ENODEV;
}
if (status < 0)
- DEBUG(MTD_DEBUG_LEVEL1, "%s: add_dataflash --> %d\n",
- dev_name(&spi->dev), status);
+ pr_debug("%s: add_dataflash --> %d\n", dev_name(&spi->dev),
+ status);
return status;
}
struct dataflash *flash = dev_get_drvdata(&spi->dev);
int status;
- DEBUG(MTD_DEBUG_LEVEL1, "%s: remove\n", dev_name(&spi->dev));
+ pr_debug("%s: remove\n", dev_name(&spi->dev));
status = mtd_device_unregister(&flash->mtd);
if (status == 0) {
.name = "mtd_dataflash",
.bus = &spi_bus_type,
.owner = THIS_MODULE,
+ .of_match_table = dataflash_dt_ids,
},
.probe = dataflash_probe,
struct spi_device *spi;
struct mutex lock;
struct mtd_info mtd;
-
- int partitioned;
};
struct flash_info {
struct sst25l_flash *flash;
struct flash_platform_data *data;
int ret, i;
- struct mtd_partition *parts = NULL;
- int nr_parts = 0;
flash_info = sst25l_match_device(spi);
if (!flash_info)
dev_info(&spi->dev, "%s (%lld KiB)\n", flash_info->name,
(long long)flash->mtd.size >> 10);
- DEBUG(MTD_DEBUG_LEVEL2,
- "mtd .name = %s, .size = 0x%llx (%lldMiB) "
+ pr_debug("mtd .name = %s, .size = 0x%llx (%lldMiB) "
".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
flash->mtd.name,
(long long)flash->mtd.size, (long long)(flash->mtd.size >> 20),
flash->mtd.numeraseregions);
- if (mtd_has_cmdlinepart()) {
- static const char *part_probes[] = {"cmdlinepart", NULL};
-
- nr_parts = parse_mtd_partitions(&flash->mtd,
- part_probes,
- &parts, 0);
- }
-
- if (nr_parts <= 0 && data && data->parts) {
- parts = data->parts;
- nr_parts = data->nr_parts;
- }
-
- if (nr_parts > 0) {
- for (i = 0; i < nr_parts; i++) {
- DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = "
- "{.name = %s, .offset = 0x%llx, "
- ".size = 0x%llx (%lldKiB) }\n",
- i, parts[i].name,
- (long long)parts[i].offset,
- (long long)parts[i].size,
- (long long)(parts[i].size >> 10));
- }
-
- flash->partitioned = 1;
- return mtd_device_register(&flash->mtd, parts,
- nr_parts);
- }
-
- ret = mtd_device_register(&flash->mtd, NULL, 0);
- if (ret == 1) {
+ ret = mtd_device_parse_register(&flash->mtd, NULL, 0,
+ data ? data->parts : NULL,
+ data ? data->nr_parts : 0);
+ if (ret) {
kfree(flash);
dev_set_drvdata(&spi->dev, NULL);
return -ENODEV;
struct erase_info *erase;
xfer = &part->XferInfo[xfernum];
- DEBUG(1, "ftl_cs: erasing xfer unit at 0x%x\n", xfer->Offset);
+ pr_debug("ftl_cs: erasing xfer unit at 0x%x\n", xfer->Offset);
xfer->state = XFER_ERASING;
/* Is there a free erase slot? Always in MTD. */
xfer = &part->XferInfo[i];
xfer->state = XFER_FAILED;
- DEBUG(1, "ftl_cs: preparing xfer unit at 0x%x\n", xfer->Offset);
+ pr_debug("ftl_cs: preparing xfer unit at 0x%x\n", xfer->Offset);
/* Write the transfer unit header */
header = part->header;
eun = &part->EUNInfo[srcunit];
xfer = &part->XferInfo[xferunit];
- DEBUG(2, "ftl_cs: copying block 0x%x to 0x%x\n",
+ pr_debug("ftl_cs: copying block 0x%x to 0x%x\n",
eun->Offset, xfer->Offset);
unit with the fewest erases, and usually pick the data unit with
the most deleted blocks. But with a small probability, pick the
oldest data unit instead. This means that we generally postpone
- the next reclaimation as long as possible, but shuffle static
+ the next reclamation as long as possible, but shuffle static
stuff around a bit for wear leveling.
======================================================================*/
uint32_t best;
int queued, ret;
- DEBUG(0, "ftl_cs: reclaiming space...\n");
- DEBUG(3, "NumTransferUnits == %x\n", part->header.NumTransferUnits);
+ pr_debug("ftl_cs: reclaiming space...\n");
+ pr_debug("NumTransferUnits == %x\n", part->header.NumTransferUnits);
/* Pick the least erased transfer unit */
best = 0xffffffff; xfer = 0xffff;
do {
for (i = 0; i < part->header.NumTransferUnits; i++) {
int n=0;
if (part->XferInfo[i].state == XFER_UNKNOWN) {
- DEBUG(3,"XferInfo[%d].state == XFER_UNKNOWN\n",i);
+ pr_debug("XferInfo[%d].state == XFER_UNKNOWN\n",i);
n=1;
erase_xfer(part, i);
}
if (part->XferInfo[i].state == XFER_ERASING) {
- DEBUG(3,"XferInfo[%d].state == XFER_ERASING\n",i);
+ pr_debug("XferInfo[%d].state == XFER_ERASING\n",i);
n=1;
queued = 1;
}
else if (part->XferInfo[i].state == XFER_ERASED) {
- DEBUG(3,"XferInfo[%d].state == XFER_ERASED\n",i);
+ pr_debug("XferInfo[%d].state == XFER_ERASED\n",i);
n=1;
prepare_xfer(part, i);
}
if (part->XferInfo[i].state == XFER_PREPARED) {
- DEBUG(3,"XferInfo[%d].state == XFER_PREPARED\n",i);
+ pr_debug("XferInfo[%d].state == XFER_PREPARED\n",i);
n=1;
if (part->XferInfo[i].EraseCount <= best) {
best = part->XferInfo[i].EraseCount;
}
}
if (!n)
- DEBUG(3,"XferInfo[%d].state == %x\n",i, part->XferInfo[i].state);
+ pr_debug("XferInfo[%d].state == %x\n",i, part->XferInfo[i].state);
}
if (xfer == 0xffff) {
if (queued) {
- DEBUG(1, "ftl_cs: waiting for transfer "
+ pr_debug("ftl_cs: waiting for transfer "
"unit to be prepared...\n");
if (part->mbd.mtd->sync)
part->mbd.mtd->sync(part->mbd.mtd);
printk(KERN_NOTICE "ftl_cs: reclaim failed: no "
"suitable transfer units!\n");
else
- DEBUG(1, "ftl_cs: reclaim failed: no "
+ pr_debug("ftl_cs: reclaim failed: no "
"suitable transfer units!\n");
return -EIO;
eun = 0;
if ((jiffies % shuffle_freq) == 0) {
- DEBUG(1, "ftl_cs: recycling freshest block...\n");
+ pr_debug("ftl_cs: recycling freshest block...\n");
best = 0xffffffff;
for (i = 0; i < part->DataUnits; i++)
if (part->EUNInfo[i].EraseCount <= best) {
printk(KERN_NOTICE "ftl_cs: reclaim failed: "
"no free blocks!\n");
else
- DEBUG(1,"ftl_cs: reclaim failed: "
+ pr_debug("ftl_cs: reclaim failed: "
"no free blocks!\n");
return -EIO;
printk(KERN_NOTICE "ftl_cs: bad free list!\n");
return 0;
}
- DEBUG(2, "ftl_cs: found free block at %d in %d\n", blk, eun);
+ pr_debug("ftl_cs: found free block at %d in %d\n", blk, eun);
return blk;
} /* find_free */
int ret;
size_t offset, retlen;
- DEBUG(2, "ftl_cs: ftl_read(0x%p, 0x%lx, %ld)\n",
+ pr_debug("ftl_cs: ftl_read(0x%p, 0x%lx, %ld)\n",
part, sector, nblocks);
if (!(part->state & FTL_FORMATTED)) {
printk(KERN_NOTICE "ftl_cs: bad partition\n");
int ret;
size_t retlen, offset;
- DEBUG(2, "ftl_cs: set_bam_entry(0x%p, 0x%x, 0x%x)\n",
+ pr_debug("ftl_cs: set_bam_entry(0x%p, 0x%x, 0x%x)\n",
part, log_addr, virt_addr);
bsize = 1 << part->header.EraseUnitSize;
eun = log_addr / bsize;
int ret;
size_t retlen, offset;
- DEBUG(2, "ftl_cs: ftl_write(0x%p, %ld, %ld)\n",
+ pr_debug("ftl_cs: ftl_write(0x%p, %ld, %ld)\n",
part, sector, nblocks);
if (!(part->state & FTL_FORMATTED)) {
printk(KERN_NOTICE "ftl_cs: bad partition\n");
partition_t *part = (void *)dev;
uint32_t bsize = 1 << part->header.EraseUnitSize;
- DEBUG(1, "FTL erase sector %ld for %d sectors\n",
+ pr_debug("FTL erase sector %ld for %d sectors\n",
sector, nr_sects);
while (nr_sects) {
return;
}
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: add_mtd for %s\n", mtd->name);
+ pr_debug("INFTL: add_mtd for %s\n", mtd->name);
inftl = kzalloc(sizeof(*inftl), GFP_KERNEL);
- if (!inftl) {
- printk(KERN_WARNING "INFTL: Out of memory for data structures\n");
+ if (!inftl)
return;
- }
inftl->mbd.mtd = mtd;
inftl->mbd.devnum = -1;
{
struct INFTLrecord *inftl = (void *)dev;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: remove_dev (i=%d)\n", dev->devnum);
+ pr_debug("INFTL: remove_dev (i=%d)\n", dev->devnum);
del_mtd_blktrans_dev(dev);
struct mtd_oob_ops ops;
int res;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooboffs = offs & (mtd->writesize - 1);
ops.ooblen = len;
ops.oobbuf = buf;
struct mtd_oob_ops ops;
int res;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooboffs = offs & (mtd->writesize - 1);
ops.ooblen = len;
ops.oobbuf = buf;
struct mtd_oob_ops ops;
int res;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooboffs = offs;
ops.ooblen = mtd->oobsize;
ops.oobbuf = oob;
u16 pot = inftl->LastFreeEUN;
int silly = inftl->nb_blocks;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_findfreeblock(inftl=%p,"
- "desperate=%d)\n", inftl, desperate);
+ pr_debug("INFTL: INFTL_findfreeblock(inftl=%p,desperate=%d)\n",
+ inftl, desperate);
/*
* Normally, we force a fold to happen before we run out of free
* blocks completely.
*/
if (!desperate && inftl->numfreeEUNs < 2) {
- DEBUG(MTD_DEBUG_LEVEL1, "INFTL: there are too few free "
- "EUNs (%d)\n", inftl->numfreeEUNs);
+ pr_debug("INFTL: there are too few free EUNs (%d)\n",
+ inftl->numfreeEUNs);
return BLOCK_NIL;
}
struct inftl_oob oob;
size_t retlen;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_foldchain(inftl=%p,thisVUC=%d,"
- "pending=%d)\n", inftl, thisVUC, pendingblock);
+ pr_debug("INFTL: INFTL_foldchain(inftl=%p,thisVUC=%d,pending=%d)\n",
+ inftl, thisVUC, pendingblock);
memset(BlockMap, 0xff, sizeof(BlockMap));
memset(BlockDeleted, 0, sizeof(BlockDeleted));
* Chain, and the Erase Unit into which we are supposed to be copying.
* Go for it.
*/
- DEBUG(MTD_DEBUG_LEVEL1, "INFTL: folding chain %d into unit %d\n",
- thisVUC, targetEUN);
+ pr_debug("INFTL: folding chain %d into unit %d\n", thisVUC, targetEUN);
for (block = 0; block < inftl->EraseSize/SECTORSIZE ; block++) {
unsigned char movebuf[SECTORSIZE];
ret = mtd->read(mtd, (inftl->EraseSize * BlockMap[block]) +
(block * SECTORSIZE), SECTORSIZE, &retlen,
movebuf);
- if (ret < 0 && ret != -EUCLEAN) {
+ if (ret < 0 && !mtd_is_bitflip(ret)) {
ret = mtd->read(mtd,
(inftl->EraseSize * BlockMap[block]) +
(block * SECTORSIZE), SECTORSIZE,
&retlen, movebuf);
if (ret != -EIO)
- DEBUG(MTD_DEBUG_LEVEL1, "INFTL: error went "
- "away on retry?\n");
+ pr_debug("INFTL: error went away on retry?\n");
}
memset(&oob, 0xff, sizeof(struct inftl_oob));
oob.b.Status = oob.b.Status1 = SECTOR_USED;
* is important, by doing oldest first if we crash/reboot then it
* it is relatively simple to clean up the mess).
*/
- DEBUG(MTD_DEBUG_LEVEL1, "INFTL: want to erase virtual chain %d\n",
- thisVUC);
+ pr_debug("INFTL: want to erase virtual chain %d\n", thisVUC);
for (;;) {
/* Find oldest unit in chain. */
u16 ChainLength = 0, thislen;
u16 chain, EUN;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_makefreeblock(inftl=%p,"
+ pr_debug("INFTL: INFTL_makefreeblock(inftl=%p,"
"pending=%d)\n", inftl, pendingblock);
for (chain = 0; chain < inftl->nb_blocks; chain++) {
size_t retlen;
int silly, silly2 = 3;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_findwriteunit(inftl=%p,"
- "block=%d)\n", inftl, block);
+ pr_debug("INFTL: INFTL_findwriteunit(inftl=%p,block=%d)\n",
+ inftl, block);
do {
/*
blockofs, 8, &retlen, (char *)&bci);
status = bci.Status | bci.Status1;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: status of block %d in "
- "EUN %d is %x\n", block , writeEUN, status);
+ pr_debug("INFTL: status of block %d in EUN %d is %x\n",
+ block , writeEUN, status);
switch(status) {
case SECTOR_FREE:
* Hopefully we free something, lets try again.
* This time we are desperate...
*/
- DEBUG(MTD_DEBUG_LEVEL1, "INFTL: using desperate==1 "
- "to find free EUN to accommodate write to "
- "VUC %d\n", thisVUC);
+ pr_debug("INFTL: using desperate==1 to find free EUN "
+ "to accommodate write to VUC %d\n",
+ thisVUC);
writeEUN = INFTL_findfreeblock(inftl, 1);
if (writeEUN == BLOCK_NIL) {
/*
struct inftl_bci bci;
size_t retlen;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_trydeletechain(inftl=%p,"
+ pr_debug("INFTL: INFTL_trydeletechain(inftl=%p,"
"thisVUC=%d)\n", inftl, thisVUC);
memset(BlockUsed, 0, sizeof(BlockUsed));
* For each block in the chain free it and make it available
* for future use. Erase from the oldest unit first.
*/
- DEBUG(MTD_DEBUG_LEVEL1, "INFTL: deleting empty VUC %d\n", thisVUC);
+ pr_debug("INFTL: deleting empty VUC %d\n", thisVUC);
for (;;) {
u16 *prevEUN = &inftl->VUtable[thisVUC];
/* If the chain is all gone already, we're done */
if (thisEUN == BLOCK_NIL) {
- DEBUG(MTD_DEBUG_LEVEL2, "INFTL: Empty VUC %d for deletion was already absent\n", thisEUN);
+ pr_debug("INFTL: Empty VUC %d for deletion was already absent\n", thisEUN);
return;
}
thisEUN = *prevEUN;
}
- DEBUG(MTD_DEBUG_LEVEL3, "Deleting EUN %d from VUC %d\n",
+ pr_debug("Deleting EUN %d from VUC %d\n",
thisEUN, thisVUC);
if (INFTL_formatblock(inftl, thisEUN) < 0) {
size_t retlen;
struct inftl_bci bci;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_deleteblock(inftl=%p,"
+ pr_debug("INFTL: INFTL_deleteblock(inftl=%p,"
"block=%d)\n", inftl, block);
while (thisEUN < inftl->nb_blocks) {
struct inftl_oob oob;
char *p, *pend;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: inftl_writeblock(inftl=%p,block=%ld,"
+ pr_debug("INFTL: inftl_writeblock(inftl=%p,block=%ld,"
"buffer=%p)\n", inftl, block, buffer);
/* Is block all zero? */
struct inftl_bci bci;
size_t retlen;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: inftl_readblock(inftl=%p,block=%ld,"
+ pr_debug("INFTL: inftl_readblock(inftl=%p,block=%ld,"
"buffer=%p)\n", inftl, block, buffer);
while (thisEUN < inftl->nb_blocks) {
int ret = mtd->read(mtd, ptr, SECTORSIZE, &retlen, buffer);
/* Handle corrected bit flips gracefully */
- if (ret < 0 && ret != -EUCLEAN)
+ if (ret < 0 && !mtd_is_bitflip(ret))
return -EIO;
}
return 0;
struct INFTLPartition *ip;
size_t retlen;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: find_boot_record(inftl=%p)\n", inftl);
+ pr_debug("INFTL: find_boot_record(inftl=%p)\n", inftl);
/*
* Assume logical EraseSize == physical erasesize for starting the
mh->FormatFlags = le32_to_cpu(mh->FormatFlags);
mh->PercentUsed = le32_to_cpu(mh->PercentUsed);
-#ifdef CONFIG_MTD_DEBUG_VERBOSE
- if (CONFIG_MTD_DEBUG_VERBOSE >= 2) {
- printk("INFTL: Media Header ->\n"
- " bootRecordID = %s\n"
- " NoOfBootImageBlocks = %d\n"
- " NoOfBinaryPartitions = %d\n"
- " NoOfBDTLPartitions = %d\n"
- " BlockMultiplerBits = %d\n"
- " FormatFlgs = %d\n"
- " OsakVersion = 0x%x\n"
- " PercentUsed = %d\n",
- mh->bootRecordID, mh->NoOfBootImageBlocks,
- mh->NoOfBinaryPartitions,
- mh->NoOfBDTLPartitions,
- mh->BlockMultiplierBits, mh->FormatFlags,
- mh->OsakVersion, mh->PercentUsed);
- }
-#endif
+ pr_debug("INFTL: Media Header ->\n"
+ " bootRecordID = %s\n"
+ " NoOfBootImageBlocks = %d\n"
+ " NoOfBinaryPartitions = %d\n"
+ " NoOfBDTLPartitions = %d\n"
+ " BlockMultiplerBits = %d\n"
+ " FormatFlgs = %d\n"
+ " OsakVersion = 0x%x\n"
+ " PercentUsed = %d\n",
+ mh->bootRecordID, mh->NoOfBootImageBlocks,
+ mh->NoOfBinaryPartitions,
+ mh->NoOfBDTLPartitions,
+ mh->BlockMultiplierBits, mh->FormatFlags,
+ mh->OsakVersion, mh->PercentUsed);
if (mh->NoOfBDTLPartitions == 0) {
printk(KERN_WARNING "INFTL: Media Header sanity check "
ip->spareUnits = le32_to_cpu(ip->spareUnits);
ip->Reserved0 = le32_to_cpu(ip->Reserved0);
-#ifdef CONFIG_MTD_DEBUG_VERBOSE
- if (CONFIG_MTD_DEBUG_VERBOSE >= 2) {
- printk(" PARTITION[%d] ->\n"
- " virtualUnits = %d\n"
- " firstUnit = %d\n"
- " lastUnit = %d\n"
- " flags = 0x%x\n"
- " spareUnits = %d\n",
- i, ip->virtualUnits, ip->firstUnit,
- ip->lastUnit, ip->flags,
- ip->spareUnits);
- }
-#endif
+ pr_debug(" PARTITION[%d] ->\n"
+ " virtualUnits = %d\n"
+ " firstUnit = %d\n"
+ " lastUnit = %d\n"
+ " flags = 0x%x\n"
+ " spareUnits = %d\n",
+ i, ip->virtualUnits, ip->firstUnit,
+ ip->lastUnit, ip->flags,
+ ip->spareUnits);
if (ip->Reserved0 != ip->firstUnit) {
struct erase_info *instr = &inftl->instr;
*
* Return: 0 when succeed, -1 on error.
*
- * ToDo: 1. Is it neceressary to check_free_sector after erasing ??
+ * ToDo: 1. Is it necessary to check_free_sector after erasing ??
*/
int INFTL_formatblock(struct INFTLrecord *inftl, int block)
{
struct mtd_info *mtd = inftl->mbd.mtd;
int physblock;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_formatblock(inftl=%p,"
- "block=%d)\n", inftl, block);
+ pr_debug("INFTL: INFTL_formatblock(inftl=%p,block=%d)\n", inftl, block);
memset(instr, 0, sizeof(struct erase_info));
{
int i;
- printk("-------------------------------------------"
+ pr_debug("-------------------------------------------"
"----------------------------------\n");
- printk("VUtable[%d] ->", s->nb_blocks);
+ pr_debug("VUtable[%d] ->", s->nb_blocks);
for (i = 0; i < s->nb_blocks; i++) {
if ((i % 8) == 0)
- printk("\n%04x: ", i);
- printk("%04x ", s->VUtable[i]);
+ pr_debug("\n%04x: ", i);
+ pr_debug("%04x ", s->VUtable[i]);
}
- printk("\n-------------------------------------------"
+ pr_debug("\n-------------------------------------------"
"----------------------------------\n");
- printk("PUtable[%d-%d=%d] ->", s->firstEUN, s->lastEUN, s->nb_blocks);
+ pr_debug("PUtable[%d-%d=%d] ->", s->firstEUN, s->lastEUN, s->nb_blocks);
for (i = 0; i <= s->lastEUN; i++) {
if ((i % 8) == 0)
- printk("\n%04x: ", i);
- printk("%04x ", s->PUtable[i]);
+ pr_debug("\n%04x: ", i);
+ pr_debug("%04x ", s->PUtable[i]);
}
- printk("\n-------------------------------------------"
+ pr_debug("\n-------------------------------------------"
"----------------------------------\n");
- printk("INFTL ->\n"
+ pr_debug("INFTL ->\n"
" EraseSize = %d\n"
" h/s/c = %d/%d/%d\n"
" numvunits = %d\n"
s->numvunits, s->firstEUN, s->lastEUN, s->numfreeEUNs,
s->LastFreeEUN, s->nb_blocks, s->nb_boot_blocks);
- printk("\n-------------------------------------------"
+ pr_debug("\n-------------------------------------------"
"----------------------------------\n");
}
{
int logical, block, i;
- printk("-------------------------------------------"
+ pr_debug("-------------------------------------------"
"----------------------------------\n");
- printk("INFTL Virtual Unit Chains:\n");
+ pr_debug("INFTL Virtual Unit Chains:\n");
for (logical = 0; logical < s->nb_blocks; logical++) {
block = s->VUtable[logical];
if (block > s->nb_blocks)
continue;
- printk(" LOGICAL %d --> %d ", logical, block);
+ pr_debug(" LOGICAL %d --> %d ", logical, block);
for (i = 0; i < s->nb_blocks; i++) {
if (s->PUtable[block] == BLOCK_NIL)
break;
block = s->PUtable[block];
- printk("%d ", block);
+ pr_debug("%d ", block);
}
- printk("\n");
+ pr_debug("\n");
}
- printk("-------------------------------------------"
+ pr_debug("-------------------------------------------"
"----------------------------------\n");
}
int i;
u8 *ANACtable, ANAC;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_mount(inftl=%p)\n", s);
+ pr_debug("INFTL: INFTL_mount(inftl=%p)\n", s);
/* Search for INFTL MediaHeader and Spare INFTL Media Header */
if (find_boot_record(s) < 0) {
* NOTEXPLORED state. Then at the end we will try to format it and
* mark it as free.
*/
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: pass 1, explore each unit\n");
+ pr_debug("INFTL: pass 1, explore each unit\n");
for (first_block = s->firstEUN; first_block <= s->lastEUN; first_block++) {
if (s->PUtable[first_block] != BLOCK_NOTEXPLORED)
continue;
logical_block = BLOCK_NIL;
}
-#ifdef CONFIG_MTD_DEBUG_VERBOSE
- if (CONFIG_MTD_DEBUG_VERBOSE >= 2)
- INFTL_dumptables(s);
-#endif
+ INFTL_dumptables(s);
/*
* Second pass, check for infinite loops in chains. These are
* possible because we don't update the previous pointers when
* we fold chains. No big deal, just fix them up in PUtable.
*/
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: pass 2, validate virtual chains\n");
+ pr_debug("INFTL: pass 2, validate virtual chains\n");
for (logical_block = 0; logical_block < s->numvunits; logical_block++) {
block = s->VUtable[logical_block];
last_block = BLOCK_NIL;
}
}
-#ifdef CONFIG_MTD_DEBUG_VERBOSE
- if (CONFIG_MTD_DEBUG_VERBOSE >= 2)
- INFTL_dumptables(s);
- if (CONFIG_MTD_DEBUG_VERBOSE >= 2)
- INFTL_dumpVUchains(s);
-#endif
+ INFTL_dumptables(s);
+ INFTL_dumpVUchains(s);
/*
* Third pass, format unreferenced blocks and init free block count.
s->numfreeEUNs = 0;
s->LastFreeEUN = BLOCK_NIL;
- DEBUG(MTD_DEBUG_LEVEL3, "INFTL: pass 3, format unused blocks\n");
+ pr_debug("INFTL: pass 3, format unused blocks\n");
for (block = s->firstEUN; block <= s->lastEUN; block++) {
if (s->PUtable[block] == BLOCK_NOTEXPLORED) {
printk("INFTL: unreferenced block %d, formatting it\n",
#include <linux/mtd/pfow.h>
#include <linux/mtd/qinfo.h>
#include <linux/slab.h>
+#include <linux/module.h>
static int lpddr_read(struct mtd_info *mtd, loff_t adr, size_t len,
size_t *retlen, u_char *buf);
are mapped on your particular target board. Refer to the
memory map which should hopefully be in the documentation for
your board.
- Ignore this option if you use run-time physmap configuration
- (i.e., run-time calling physmap_configure()).
config MTD_PHYSMAP_LEN
hex "Physical length of flash mapping"
than the total amount of flash present. Refer to the memory
map which should hopefully be in the documentation for your
board.
- Ignore this option if you use run-time physmap configuration
- (i.e., run-time calling physmap_configure()).
config MTD_PHYSMAP_BANKWIDTH
int "Bank width in octets"
in octets. For example, if you have a data bus width of 32
bits, you would set the bus width octet value to 4. This is
used internally by the CFI drivers.
- Ignore this option if you use run-time physmap configuration
- (i.e., run-time calling physmap_configure()).
config MTD_PHYSMAP_OF
tristate "Flash device in physical memory map based on OF description"
config MTD_LANTIQ
tristate "Lantiq SoC NOR support"
depends on LANTIQ
- select MTD_PARTITIONS
help
Support for NOR flash attached to the Lantiq SoC's External Bus Unit.
This enables access to the flash chips on the Hitachi SolutionEngine and
similar boards. Say 'Y' if you are building a kernel for such a board.
-config MTD_ARM_INTEGRATOR
- tristate "CFI Flash device mapped on ARM Integrator/P720T"
- depends on ARM && MTD_CFI
-
config MTD_CDB89712
tristate "Cirrus CDB89712 evaluation board mappings"
depends on MTD_CFI && ARCH_CDB89712
This enables access to the NV-RAM on autronix autcpu12 board.
If you have such a board, say 'Y'.
-config MTD_EDB7312
- tristate "CFI Flash device mapped on EDB7312"
- depends on ARCH_EDB7312 && MTD_CFI
- help
- This enables access to the CFI Flash on the Cogent EDB7312 board.
- If you have such a board, say 'Y' here.
-
config MTD_IMPA7
tristate "JEDEC Flash device mapped on impA7"
depends on ARM && MTD_JEDECPROBE
This enables access to the NOR Flash on the impA7 board of
implementa GmbH. If you have such a board, say 'Y' here.
-config MTD_CEIVA
- tristate "JEDEC Flash device mapped on Ceiva/Polaroid PhotoMax Digital Picture Frame"
- depends on MTD_JEDECPROBE && ARCH_CEIVA
- help
- This enables access to the flash chips on the Ceiva/Polaroid
- PhotoMax Digital Picture Frame.
- If you have such a device, say 'Y'.
-
config MTD_H720X
tristate "Hynix evaluation board mappings"
depends on MTD_CFI && ( ARCH_H7201 || ARCH_H7202 )
obj-$(CONFIG_MTD_TSUNAMI) += tsunami_flash.o
obj-$(CONFIG_MTD_PXA2XX) += pxa2xx-flash.o
obj-$(CONFIG_MTD_MBX860) += mbx860.o
-obj-$(CONFIG_MTD_CEIVA) += ceiva.o
obj-$(CONFIG_MTD_OCTAGON) += octagon-5066.o
obj-$(CONFIG_MTD_PHYSMAP) += physmap.o
obj-$(CONFIG_MTD_PHYSMAP_OF) += physmap_of.o
obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
obj-$(CONFIG_MTD_PCI) += pci.o
obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o
-obj-$(CONFIG_MTD_EDB7312) += edb7312.o
obj-$(CONFIG_MTD_IMPA7) += impa7.o
obj-$(CONFIG_MTD_FORTUNET) += fortunet.o
obj-$(CONFIG_MTD_UCLINUX) += uclinux.o
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <linux/mtd/map.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
uint32_t flash_ambctl0, flash_ambctl1;
uint32_t save_ambctl0, save_ambctl1;
unsigned long irq_flags;
- struct mtd_partition *parts;
};
static void switch_to_flash(struct async_state *state)
return -ENXIO;
}
- ret = parse_mtd_partitions(state->mtd, part_probe_types, &pdata->parts, 0);
- if (ret > 0) {
- pr_devinit(KERN_NOTICE DRIVER_NAME ": Using commandline partition definition\n");
- mtd_device_register(state->mtd, pdata->parts, ret);
- state->parts = pdata->parts;
- } else if (pdata->nr_parts) {
- pr_devinit(KERN_NOTICE DRIVER_NAME ": Using board partition definition\n");
- mtd_device_register(state->mtd, pdata->parts, pdata->nr_parts);
- } else {
- pr_devinit(KERN_NOTICE DRIVER_NAME ": no partition info available, registering whole flash at once\n");
- mtd_device_register(state->mtd, NULL, 0);
- }
+ mtd_device_parse_register(state->mtd, part_probe_types, 0,
+ pdata->parts, pdata->nr_parts);
platform_set_drvdata(pdev, state);
struct async_state *state = platform_get_drvdata(pdev);
gpio_free(state->enet_flash_pin);
mtd_device_unregister(state->mtd);
- kfree(state->parts);
map_destroy(state->mtd);
kfree(state);
return 0;
+++ /dev/null
-/*
- * Ceiva flash memory driver.
- * Copyright (C) 2002 Rob Scott <rscott@mtrob.fdns.net>
- *
- * Note: this driver supports jedec compatible devices. Modification
- * for CFI compatible devices should be straight forward: change
- * jedec_probe to cfi_probe.
- *
- * Based on: sa1100-flash.c, which has the following copyright:
- * Flash memory access on SA11x0 based devices
- *
- * (C) 2000 Nicolas Pitre <nico@fluxnic.net>
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/concat.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/io.h>
-#include <asm/sizes.h>
-
-/*
- * This isn't complete yet, so...
- */
-#define CONFIG_MTD_CEIVA_STATICMAP
-
-#ifdef CONFIG_MTD_CEIVA_STATICMAP
-/*
- * See include/linux/mtd/partitions.h for definition of the mtd_partition
- * structure.
- *
- * Please note:
- * 1. The flash size given should be the largest flash size that can
- * be accommodated.
- *
- * 2. The bus width must defined in clps_setup_flash.
- *
- * The MTD layer will detect flash chip aliasing and reduce the size of
- * the map accordingly.
- *
- */
-
-#ifdef CONFIG_ARCH_CEIVA
-/* Flash / Partition sizing */
-/* For the 28F8003, we use the block mapping to calcuate the sizes */
-#define MAX_SIZE_KiB (16 + 8 + 8 + 96 + (7*128))
-#define BOOT_PARTITION_SIZE_KiB (16)
-#define PARAMS_PARTITION_SIZE_KiB (8)
-#define KERNEL_PARTITION_SIZE_KiB (4*128)
-/* Use both remaining portion of first flash, and all of second flash */
-#define ROOT_PARTITION_SIZE_KiB (3*128) + (8*128)
-
-static struct mtd_partition ceiva_partitions[] = {
- {
- .name = "Ceiva BOOT partition",
- .size = BOOT_PARTITION_SIZE_KiB*1024,
- .offset = 0,
-
- },{
- .name = "Ceiva parameters partition",
- .size = PARAMS_PARTITION_SIZE_KiB*1024,
- .offset = (16 + 8) * 1024,
- },{
- .name = "Ceiva kernel partition",
- .size = (KERNEL_PARTITION_SIZE_KiB)*1024,
- .offset = 0x20000,
-
- },{
- .name = "Ceiva root filesystem partition",
- .offset = MTDPART_OFS_APPEND,
- .size = (ROOT_PARTITION_SIZE_KiB)*1024,
- }
-};
-#endif
-
-static int __init clps_static_partitions(struct mtd_partition **parts)
-{
- int nb_parts = 0;
-
-#ifdef CONFIG_ARCH_CEIVA
- if (machine_is_ceiva()) {
- *parts = ceiva_partitions;
- nb_parts = ARRAY_SIZE(ceiva_partitions);
- }
-#endif
- return nb_parts;
-}
-#endif
-
-struct clps_info {
- unsigned long base;
- unsigned long size;
- int width;
- void *vbase;
- struct map_info *map;
- struct mtd_info *mtd;
- struct resource *res;
-};
-
-#define NR_SUBMTD 4
-
-static struct clps_info info[NR_SUBMTD];
-
-static int __init clps_setup_mtd(struct clps_info *clps, int nr, struct mtd_info **rmtd)
-{
- struct mtd_info *subdev[nr];
- struct map_info *maps;
- int i, found = 0, ret = 0;
-
- /*
- * Allocate the map_info structs in one go.
- */
- maps = kzalloc(sizeof(struct map_info) * nr, GFP_KERNEL);
- if (!maps)
- return -ENOMEM;
- /*
- * Claim and then map the memory regions.
- */
- for (i = 0; i < nr; i++) {
- if (clps[i].base == (unsigned long)-1)
- break;
-
- clps[i].res = request_mem_region(clps[i].base, clps[i].size, "clps flash");
- if (!clps[i].res) {
- ret = -EBUSY;
- break;
- }
-
- clps[i].map = maps + i;
-
- clps[i].map->name = "clps flash";
- clps[i].map->phys = clps[i].base;
-
- clps[i].vbase = ioremap(clps[i].base, clps[i].size);
- if (!clps[i].vbase) {
- ret = -ENOMEM;
- break;
- }
-
- clps[i].map->virt = (void __iomem *)clps[i].vbase;
- clps[i].map->bankwidth = clps[i].width;
- clps[i].map->size = clps[i].size;
-
- simple_map_init(&clps[i].map);
-
- clps[i].mtd = do_map_probe("jedec_probe", clps[i].map);
- if (clps[i].mtd == NULL) {
- ret = -ENXIO;
- break;
- }
- clps[i].mtd->owner = THIS_MODULE;
- subdev[i] = clps[i].mtd;
-
- printk(KERN_INFO "clps flash: JEDEC device at 0x%08lx, %dMiB, "
- "%d-bit\n", clps[i].base, clps[i].mtd->size >> 20,
- clps[i].width * 8);
- found += 1;
- }
-
- /*
- * ENXIO is special. It means we didn't find a chip when
- * we probed. We need to tear down the mapping, free the
- * resource and mark it as such.
- */
- if (ret == -ENXIO) {
- iounmap(clps[i].vbase);
- clps[i].vbase = NULL;
- release_resource(clps[i].res);
- clps[i].res = NULL;
- }
-
- /*
- * If we found one device, don't bother with concat support.
- * If we found multiple devices, use concat if we have it
- * available, otherwise fail.
- */
- if (ret == 0 || ret == -ENXIO) {
- if (found == 1) {
- *rmtd = subdev[0];
- ret = 0;
- } else if (found > 1) {
- /*
- * We detected multiple devices. Concatenate
- * them together.
- */
- *rmtd = mtd_concat_create(subdev, found,
- "clps flash");
- if (*rmtd == NULL)
- ret = -ENXIO;
- }
- }
-
- /*
- * If we failed, clean up.
- */
- if (ret) {
- do {
- if (clps[i].mtd)
- map_destroy(clps[i].mtd);
- if (clps[i].vbase)
- iounmap(clps[i].vbase);
- if (clps[i].res)
- release_resource(clps[i].res);
- } while (i--);
-
- kfree(maps);
- }
-
- return ret;
-}
-
-static void __exit clps_destroy_mtd(struct clps_info *clps, struct mtd_info *mtd)
-{
- int i;
-
- mtd_device_unregister(mtd);
-
- if (mtd != clps[0].mtd)
- mtd_concat_destroy(mtd);
-
- for (i = NR_SUBMTD; i >= 0; i--) {
- if (clps[i].mtd)
- map_destroy(clps[i].mtd);
- if (clps[i].vbase)
- iounmap(clps[i].vbase);
- if (clps[i].res)
- release_resource(clps[i].res);
- }
- kfree(clps[0].map);
-}
-
-/*
- * We define the memory space, size, and width for the flash memory
- * space here.
- */
-
-static int __init clps_setup_flash(void)
-{
- int nr = 0;
-
-#ifdef CONFIG_ARCH_CEIVA
- if (machine_is_ceiva()) {
- info[0].base = CS0_PHYS_BASE;
- info[0].size = SZ_32M;
- info[0].width = CEIVA_FLASH_WIDTH;
- info[1].base = CS1_PHYS_BASE;
- info[1].size = SZ_32M;
- info[1].width = CEIVA_FLASH_WIDTH;
- nr = 2;
- }
-#endif
- return nr;
-}
-
-static struct mtd_partition *parsed_parts;
-static const char *probes[] = { "cmdlinepart", "RedBoot", NULL };
-
-static void __init clps_locate_partitions(struct mtd_info *mtd)
-{
- const char *part_type = NULL;
- int nr_parts = 0;
- do {
- /*
- * Partition selection stuff.
- */
- nr_parts = parse_mtd_partitions(mtd, probes, &parsed_parts, 0);
- if (nr_parts > 0) {
- part_type = "command line";
- break;
- }
-#ifdef CONFIG_MTD_CEIVA_STATICMAP
- nr_parts = clps_static_partitions(&parsed_parts);
- if (nr_parts > 0) {
- part_type = "static";
- break;
- }
- printk("found: %d partitions\n", nr_parts);
-#endif
- } while (0);
-
- if (nr_parts == 0) {
- printk(KERN_NOTICE "clps flash: no partition info "
- "available, registering whole flash\n");
- mtd_device_register(mtd, NULL, 0);
- } else {
- printk(KERN_NOTICE "clps flash: using %s partition "
- "definition\n", part_type);
- mtd_device_register(mtd, parsed_parts, nr_parts);
- }
-
- /* Always succeeds. */
-}
-
-static void __exit clps_destroy_partitions(void)
-{
- kfree(parsed_parts);
-}
-
-static struct mtd_info *mymtd;
-
-static int __init clps_mtd_init(void)
-{
- int ret;
- int nr;
-
- nr = clps_setup_flash();
- if (nr < 0)
- return nr;
-
- ret = clps_setup_mtd(info, nr, &mymtd);
- if (ret)
- return ret;
-
- clps_locate_partitions(mymtd);
-
- return 0;
-}
-
-static void __exit clps_mtd_cleanup(void)
-{
- clps_destroy_mtd(info, mymtd);
- clps_destroy_partitions();
-}
-
-module_init(clps_mtd_init);
-module_exit(clps_mtd_cleanup);
-
-MODULE_AUTHOR("Rob Scott");
-MODULE_DESCRIPTION("Cirrus Logic JEDEC map driver");
-MODULE_LICENSE("GPL");
/* Partition stuff */
-static struct mtd_partition *dc21285_parts;
static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
static int __init init_dc21285(void)
{
-
- int nrparts;
-
/* Determine bankwidth */
switch (*CSR_SA110_CNTL & (3<<14)) {
case SA110_CNTL_ROMWIDTH_8:
dc21285_mtd->owner = THIS_MODULE;
- nrparts = parse_mtd_partitions(dc21285_mtd, probes, &dc21285_parts, 0);
- mtd_device_register(dc21285_mtd, dc21285_parts, nrparts);
+ mtd_device_parse_register(dc21285_mtd, probes, 0, NULL, 0);
if(machine_is_ebsa285()) {
/*
static void __exit cleanup_dc21285(void)
{
mtd_device_unregister(dc21285_mtd);
- if (dc21285_parts)
- kfree(dc21285_parts);
map_destroy(dc21285_mtd);
iounmap(dc21285_map.virt);
}
+++ /dev/null
-/*
- * Handle mapping of the NOR flash on Cogent EDB7312 boards
- *
- * Copyright 2002 SYSGO Real-Time Solutions GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#define WINDOW_ADDR 0x00000000 /* physical properties of flash */
-#define WINDOW_SIZE 0x01000000
-#define BUSWIDTH 2
-#define FLASH_BLOCKSIZE_MAIN 0x20000
-#define FLASH_NUMBLOCKS_MAIN 128
-/* can be "cfi_probe", "jedec_probe", "map_rom", NULL }; */
-#define PROBETYPES { "cfi_probe", NULL }
-
-#define MSG_PREFIX "EDB7312-NOR:" /* prefix for our printk()'s */
-#define MTDID "edb7312-nor" /* for mtdparts= partitioning */
-
-static struct mtd_info *mymtd;
-
-struct map_info edb7312nor_map = {
- .name = "NOR flash on EDB7312",
- .size = WINDOW_SIZE,
- .bankwidth = BUSWIDTH,
- .phys = WINDOW_ADDR,
-};
-
-/*
- * MTD partitioning stuff
- */
-static struct mtd_partition static_partitions[3] =
-{
- {
- .name = "ARMboot",
- .size = 0x40000,
- .offset = 0
- },
- {
- .name = "Kernel",
- .size = 0x200000,
- .offset = 0x40000
- },
- {
- .name = "RootFS",
- .size = 0xDC0000,
- .offset = 0x240000
- },
-};
-
-static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
-
-static int mtd_parts_nb = 0;
-static struct mtd_partition *mtd_parts = 0;
-
-static int __init init_edb7312nor(void)
-{
- static const char *rom_probe_types[] = PROBETYPES;
- const char **type;
- const char *part_type = 0;
-
- printk(KERN_NOTICE MSG_PREFIX "0x%08x at 0x%08x\n",
- WINDOW_SIZE, WINDOW_ADDR);
- edb7312nor_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE);
-
- if (!edb7312nor_map.virt) {
- printk(MSG_PREFIX "failed to ioremap\n");
- return -EIO;
- }
-
- simple_map_init(&edb7312nor_map);
-
- mymtd = 0;
- type = rom_probe_types;
- for(; !mymtd && *type; type++) {
- mymtd = do_map_probe(*type, &edb7312nor_map);
- }
- if (mymtd) {
- mymtd->owner = THIS_MODULE;
-
- mtd_parts_nb = parse_mtd_partitions(mymtd, probes, &mtd_parts, MTDID);
- if (mtd_parts_nb > 0)
- part_type = "detected";
-
- if (mtd_parts_nb == 0) {
- mtd_parts = static_partitions;
- mtd_parts_nb = ARRAY_SIZE(static_partitions);
- part_type = "static";
- }
-
- if (mtd_parts_nb == 0)
- printk(KERN_NOTICE MSG_PREFIX "no partition info available\n");
- else
- printk(KERN_NOTICE MSG_PREFIX
- "using %s partition definition\n", part_type);
- /* Register the whole device first. */
- mtd_device_register(mymtd, NULL, 0);
- mtd_device_register(mymtd, mtd_parts, mtd_parts_nb);
- return 0;
- }
-
- iounmap((void *)edb7312nor_map.virt);
- return -ENXIO;
-}
-
-static void __exit cleanup_edb7312nor(void)
-{
- if (mymtd) {
- mtd_device_unregister(mymtd);
- map_destroy(mymtd);
- }
- if (edb7312nor_map.virt) {
- iounmap((void *)edb7312nor_map.virt);
- edb7312nor_map.virt = 0;
- }
-}
-
-module_init(init_edb7312nor);
-module_exit(cleanup_edb7312nor);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Marius Groeger <mag@sysgo.de>");
-MODULE_DESCRIPTION("Generic configurable MTD map driver");
*/
static int __devinit gpio_flash_probe(struct platform_device *pdev)
{
- int nr_parts;
size_t i, arr_size;
struct physmap_flash_data *pdata;
struct resource *memory;
return -ENXIO;
}
- nr_parts = parse_mtd_partitions(state->mtd, part_probe_types,
- &pdata->parts, 0);
- if (nr_parts > 0) {
- pr_devinit(KERN_NOTICE PFX "Using commandline partition definition\n");
- kfree(pdata->parts);
- } else if (pdata->nr_parts) {
- pr_devinit(KERN_NOTICE PFX "Using board partition definition\n");
- nr_parts = pdata->nr_parts;
- } else {
- pr_devinit(KERN_NOTICE PFX "no partition info available, registering whole flash at once\n");
- nr_parts = 0;
- }
- mtd_device_register(state->mtd, pdata->parts, nr_parts);
+ mtd_device_parse_register(state->mtd, part_probe_types, 0,
+ pdata->parts, pdata->nr_parts);
return 0;
}
#define NUM_PARTITIONS ARRAY_SIZE(h720x_partitions)
-static int nr_mtd_parts;
-static struct mtd_partition *mtd_parts;
-static const char *probes[] = { "cmdlinepart", NULL };
-
/*
* Initialize FLASH support
*/
static int __init h720x_mtd_init(void)
{
-
- char *part_type = NULL;
-
h720x_map.virt = ioremap(h720x_map.phys, h720x_map.size);
if (!h720x_map.virt) {
if (mymtd) {
mymtd->owner = THIS_MODULE;
- nr_mtd_parts = parse_mtd_partitions(mymtd, probes, &mtd_parts, 0);
- if (nr_mtd_parts > 0)
- part_type = "command line";
- if (nr_mtd_parts <= 0) {
- mtd_parts = h720x_partitions;
- nr_mtd_parts = NUM_PARTITIONS;
- part_type = "builtin";
- }
- printk(KERN_INFO "Using %s partition table\n", part_type);
- mtd_device_register(mymtd, mtd_parts, nr_mtd_parts);
+ mtd_device_parse_register(mymtd, NULL, 0,
+ h720x_partitions, NUM_PARTITIONS);
return 0;
}
map_destroy(mymtd);
}
- /* Free partition info, if commandline partition was used */
- if (mtd_parts && (mtd_parts != h720x_partitions))
- kfree (mtd_parts);
-
if (h720x_map.virt) {
iounmap((void *)h720x_map.virt);
h720x_map.virt = 0;
/*
* MTD partitioning stuff
*/
-static struct mtd_partition static_partitions[] =
+static struct mtd_partition partitions[] =
{
{
.name = "FileSystem",
},
};
-static int mtd_parts_nb[NUM_FLASHBANKS];
-static struct mtd_partition *mtd_parts[NUM_FLASHBANKS];
-
-static const char *probes[] = { "cmdlinepart", NULL };
-
static int __init init_impa7(void)
{
static const char *rom_probe_types[] = PROBETYPES;
const char **type;
- const char *part_type = 0;
int i;
static struct { u_long addr; u_long size; } pt[NUM_FLASHBANKS] = {
{ WINDOW_ADDR0, WINDOW_SIZE0 },
if (impa7_mtd[i]) {
impa7_mtd[i]->owner = THIS_MODULE;
devicesfound++;
- mtd_parts_nb[i] = parse_mtd_partitions(impa7_mtd[i],
- probes,
- &mtd_parts[i],
- 0);
- if (mtd_parts_nb[i] > 0) {
- part_type = "command line";
- } else {
- mtd_parts[i] = static_partitions;
- mtd_parts_nb[i] = ARRAY_SIZE(static_partitions);
- part_type = "static";
- }
-
- printk(KERN_NOTICE MSG_PREFIX
- "using %s partition definition\n",
- part_type);
- mtd_device_register(impa7_mtd[i],
- mtd_parts[i], mtd_parts_nb[i]);
+ mtd_device_parse_register(impa7_mtd[i], NULL, 0,
+ partitions,
+ ARRAY_SIZE(partitions));
}
else
iounmap((void *)impa7_map[i].virt);
void __iomem *csr_base;
struct map_info map;
struct mtd_info *info;
- int nr_parts;
struct pci_dev *dev;
};
static int __devinit vr_nor_init_partitions(struct vr_nor_mtd *p)
{
- struct mtd_partition *parts;
- static const char *part_probes[] = { "cmdlinepart", NULL };
-
/* register the flash bank */
/* partition the flash bank */
- p->nr_parts = parse_mtd_partitions(p->info, part_probes, &parts, 0);
- return mtd_device_register(p->info, parts, p->nr_parts);
+ return mtd_device_parse_register(p->info, NULL, 0, NULL, 0);
}
static void __devexit vr_nor_destroy_mtd_setup(struct vr_nor_mtd *p)
struct ixp2000_flash_info {
struct mtd_info *mtd;
struct map_info map;
- struct mtd_partition *partitions;
struct resource *res;
};
if (info->map.map_priv_1)
iounmap((void *) info->map.map_priv_1);
- kfree(info->partitions);
-
if (info->res) {
release_resource(info->res);
kfree(info->res);
}
info->mtd->owner = THIS_MODULE;
- err = parse_mtd_partitions(info->mtd, probes, &info->partitions, 0);
- if (err > 0) {
- err = mtd_device_register(info->mtd, info->partitions, err);
- if(err)
- dev_err(&dev->dev, "Could not parse partitions\n");
- }
-
+ err = mtd_device_parse_register(info->mtd, probes, 0, NULL, 0);
if (err)
goto Error;
struct ixp4xx_flash_info {
struct mtd_info *mtd;
struct map_info map;
- struct mtd_partition *partitions;
struct resource *res;
};
if (info->map.virt)
iounmap(info->map.virt);
- kfree(info->partitions);
-
if (info->res) {
release_resource(info->res);
kfree(info->res);
{
struct flash_platform_data *plat = dev->dev.platform_data;
struct ixp4xx_flash_info *info;
- const char *part_type = NULL;
- int nr_parts = 0;
int err = -1;
if (!plat)
/* Use the fast version */
info->map.write = ixp4xx_write16;
- nr_parts = parse_mtd_partitions(info->mtd, probes, &info->partitions,
- dev->resource->start);
- if (nr_parts > 0) {
- part_type = "dynamic";
- } else {
- info->partitions = plat->parts;
- nr_parts = plat->nr_parts;
- part_type = "static";
- }
- if (nr_parts == 0)
- printk(KERN_NOTICE "IXP4xx flash: no partition info "
- "available, registering whole flash\n");
- else
- printk(KERN_NOTICE "IXP4xx flash: using %s partition "
- "definition\n", part_type);
-
- err = mtd_device_register(info->mtd, info->partitions, nr_parts);
- if (err)
+ err = mtd_device_parse_register(info->mtd, probes, dev->resource->start,
+ plat->parts, plat->nr_parts);
+ if (err) {
printk(KERN_ERR "Could not parse partitions\n");
-
- if (err)
goto Error;
+ }
return 0;
spin_unlock_irqrestore(&ebu_lock, flags);
}
-static const char const *part_probe_types[] = { "cmdlinepart", NULL };
-
static int __init
ltq_mtd_probe(struct platform_device *pdev)
{
struct physmap_flash_data *ltq_mtd_data = dev_get_platdata(&pdev->dev);
struct ltq_mtd *ltq_mtd;
- struct mtd_partition *parts;
struct resource *res;
- int nr_parts = 0;
struct cfi_private *cfi;
int err;
cfi->addr_unlock1 ^= 1;
cfi->addr_unlock2 ^= 1;
- nr_parts = parse_mtd_partitions(ltq_mtd->mtd,
- part_probe_types, &parts, 0);
- if (nr_parts > 0) {
- dev_info(&pdev->dev,
- "using %d partitions from cmdline", nr_parts);
- } else {
- nr_parts = ltq_mtd_data->nr_parts;
- parts = ltq_mtd_data->parts;
- }
-
- err = mtd_device_register(ltq_mtd->mtd, parts, nr_parts);
+ err = mtd_device_parse_register(ltq_mtd->mtd, NULL, 0,
+ ltq_mtd_data->parts, ltq_mtd_data->nr_parts);
if (err) {
dev_err(&pdev->dev, "failed to add partitions\n");
goto err_destroy;
/* cache; could be found out of res */
unsigned long win_mask;
- int nr_parts;
- struct mtd_partition *parts;
-
spinlock_t lock;
};
static char *rom_probe_types[] = { "cfi_probe", NULL };
-static char *part_probe_types[] = { "cmdlinepart", NULL };
-
static int latch_addr_flash_remove(struct platform_device *dev)
{
struct latch_addr_flash_info *info;
latch_addr_data = dev->dev.platform_data;
if (info->mtd != NULL) {
- if (info->nr_parts)
- kfree(info->parts);
mtd_device_unregister(info->mtd);
map_destroy(info->mtd);
}
}
info->mtd->owner = THIS_MODULE;
- err = parse_mtd_partitions(info->mtd, (const char **)part_probe_types,
- &info->parts, 0);
- if (err > 0) {
- mtd_device_register(info->mtd, info->parts, err);
- return 0;
- }
- if (latch_addr_data->nr_parts) {
- pr_notice("Using latch-addr-flash partition information\n");
- mtd_device_register(info->mtd,
- latch_addr_data->parts,
- latch_addr_data->nr_parts);
- return 0;
- }
-
- mtd_device_register(info->mtd, NULL, 0);
+ mtd_device_parse_register(info->mtd, NULL, 0,
+ latch_addr_data->parts, latch_addr_data->nr_parts);
return 0;
iounmap:
#include <linux/mtd/map.h>
#include <linux/mtd/mtd.h>
-#ifdef CONFIG_MTD_DEBUG
-static int debug = CONFIG_MTD_DEBUG_VERBOSE;
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "Set Debug Level 0=quiet, 5=noisy");
-#undef DEBUG
-#define DEBUG(n, format, arg...) \
- if (n <= debug) { \
- printk(KERN_DEBUG __FILE__ ":%s(): " format "\n", __func__ , ## arg); \
- }
-
-#else
-#undef DEBUG
-#define DEBUG(n, arg...)
-static const int debug = 0;
-#endif
-
#define info(format, arg...) printk(KERN_INFO "pcmciamtd: " format "\n" , ## arg)
#define DRIVER_DESC "PCMCIA Flash memory card driver"
int ret;
if (!pcmcia_dev_present(dev->p_dev)) {
- DEBUG(1, "device removed");
+ pr_debug("device removed\n");
return 0;
}
offset = to & ~(dev->win_size-1);
if (offset != dev->offset) {
- DEBUG(2, "Remapping window from 0x%8.8x to 0x%8.8x",
+ pr_debug("Remapping window from 0x%8.8x to 0x%8.8x\n",
dev->offset, offset);
ret = pcmcia_map_mem_page(dev->p_dev, win, offset);
if (ret != 0)
return d;
d.x[0] = readb(addr);
- DEBUG(3, "ofs = 0x%08lx (%p) data = 0x%02lx", ofs, addr, d.x[0]);
+ pr_debug("ofs = 0x%08lx (%p) data = 0x%02lx\n", ofs, addr, d.x[0]);
return d;
}
return d;
d.x[0] = readw(addr);
- DEBUG(3, "ofs = 0x%08lx (%p) data = 0x%04lx", ofs, addr, d.x[0]);
+ pr_debug("ofs = 0x%08lx (%p) data = 0x%04lx\n", ofs, addr, d.x[0]);
return d;
}
struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1;
unsigned long win_size = dev->win_size;
- DEBUG(3, "to = %p from = %lu len = %zd", to, from, len);
+ pr_debug("to = %p from = %lu len = %zd\n", to, from, len);
while(len) {
int toread = win_size - (from & (win_size-1));
caddr_t addr;
if(!addr)
return;
- DEBUG(4, "memcpy from %p to %p len = %d", addr, to, toread);
+ pr_debug("memcpy from %p to %p len = %d\n", addr, to, toread);
memcpy_fromio(to, addr, toread);
len -= toread;
to += toread;
if(!addr)
return;
- DEBUG(3, "adr = 0x%08lx (%p) data = 0x%02lx", adr, addr, d.x[0]);
+ pr_debug("adr = 0x%08lx (%p) data = 0x%02lx\n", adr, addr, d.x[0]);
writeb(d.x[0], addr);
}
if(!addr)
return;
- DEBUG(3, "adr = 0x%08lx (%p) data = 0x%04lx", adr, addr, d.x[0]);
+ pr_debug("adr = 0x%08lx (%p) data = 0x%04lx\n", adr, addr, d.x[0]);
writew(d.x[0], addr);
}
struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1;
unsigned long win_size = dev->win_size;
- DEBUG(3, "to = %lu from = %p len = %zd", to, from, len);
+ pr_debug("to = %lu from = %p len = %zd\n", to, from, len);
while(len) {
int towrite = win_size - (to & (win_size-1));
caddr_t addr;
if(!addr)
return;
- DEBUG(4, "memcpy from %p to %p len = %d", from, addr, towrite);
+ pr_debug("memcpy from %p to %p len = %d\n", from, addr, towrite);
memcpy_toio(addr, from, towrite);
len -= towrite;
to += towrite;
return d;
d.x[0] = readb(win_base + ofs);
- DEBUG(3, "ofs = 0x%08lx (%p) data = 0x%02lx",
+ pr_debug("ofs = 0x%08lx (%p) data = 0x%02lx\n",
ofs, win_base + ofs, d.x[0]);
return d;
}
return d;
d.x[0] = readw(win_base + ofs);
- DEBUG(3, "ofs = 0x%08lx (%p) data = 0x%04lx",
+ pr_debug("ofs = 0x%08lx (%p) data = 0x%04lx\n",
ofs, win_base + ofs, d.x[0]);
return d;
}
if(DEV_REMOVED(map))
return;
- DEBUG(3, "to = %p from = %lu len = %zd", to, from, len);
+ pr_debug("to = %p from = %lu len = %zd\n", to, from, len);
memcpy_fromio(to, win_base + from, len);
}
if(DEV_REMOVED(map))
return;
- DEBUG(3, "adr = 0x%08lx (%p) data = 0x%02lx",
+ pr_debug("adr = 0x%08lx (%p) data = 0x%02lx\n",
adr, win_base + adr, d.x[0]);
writeb(d.x[0], win_base + adr);
}
if(DEV_REMOVED(map))
return;
- DEBUG(3, "adr = 0x%08lx (%p) data = 0x%04lx",
+ pr_debug("adr = 0x%08lx (%p) data = 0x%04lx\n",
adr, win_base + adr, d.x[0]);
writew(d.x[0], win_base + adr);
}
if(DEV_REMOVED(map))
return;
- DEBUG(3, "to = %lu from = %p len = %zd", to, from, len);
+ pr_debug("to = %lu from = %p len = %zd\n", to, from, len);
memcpy_toio(win_base + to, from, len);
}
struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1;
struct pcmcia_device *link = dev->p_dev;
- DEBUG(2, "dev = %p on = %d vpp = %d\n", dev, on, dev->vpp);
+ pr_debug("dev = %p on = %d vpp = %d\n\n", dev, on, dev->vpp);
pcmcia_fixup_vpp(link, on ? dev->vpp : 0);
}
{
struct pcmciamtd_dev *dev = link->priv;
- DEBUG(3, "link = 0x%p", link);
+ pr_debug("link = 0x%p\n", link);
if (link->resource[2]->end) {
if(dev->win_base) {
}
-#ifdef CONFIG_MTD_DEBUG
static int pcmciamtd_cistpl_format(struct pcmcia_device *p_dev,
tuple_t *tuple,
void *priv_data)
if (!pcmcia_parse_tuple(tuple, &parse)) {
cistpl_format_t *t = &parse.format;
(void)t; /* Shut up, gcc */
- DEBUG(2, "Format type: %u, Error Detection: %u, offset = %u, length =%u",
+ pr_debug("Format type: %u, Error Detection: %u, offset = %u, length =%u\n",
t->type, t->edc, t->offset, t->length);
}
return -ENOSPC;
if (!pcmcia_parse_tuple(tuple, &parse)) {
cistpl_jedec_t *t = &parse.jedec;
for (i = 0; i < t->nid; i++)
- DEBUG(2, "JEDEC: 0x%02x 0x%02x",
+ pr_debug("JEDEC: 0x%02x 0x%02x\n",
t->id[i].mfr, t->id[i].info);
}
return -ENOSPC;
}
-#endif
static int pcmciamtd_cistpl_device(struct pcmcia_device *p_dev,
tuple_t *tuple,
if (pcmcia_parse_tuple(tuple, &parse))
return -EINVAL;
- DEBUG(2, "Common memory:");
+ pr_debug("Common memory:\n");
dev->pcmcia_map.size = t->dev[0].size;
/* from here on: DEBUG only */
for (i = 0; i < t->ndev; i++) {
- DEBUG(2, "Region %d, type = %u", i, t->dev[i].type);
- DEBUG(2, "Region %d, wp = %u", i, t->dev[i].wp);
- DEBUG(2, "Region %d, speed = %u ns", i, t->dev[i].speed);
- DEBUG(2, "Region %d, size = %u bytes", i, t->dev[i].size);
+ pr_debug("Region %d, type = %u\n", i, t->dev[i].type);
+ pr_debug("Region %d, wp = %u\n", i, t->dev[i].wp);
+ pr_debug("Region %d, speed = %u ns\n", i, t->dev[i].speed);
+ pr_debug("Region %d, size = %u bytes\n", i, t->dev[i].size);
}
return 0;
}
dev->pcmcia_map.bankwidth = t->geo[0].buswidth;
/* from here on: DEBUG only */
for (i = 0; i < t->ngeo; i++) {
- DEBUG(2, "region: %d bankwidth = %u", i, t->geo[i].buswidth);
- DEBUG(2, "region: %d erase_block = %u", i, t->geo[i].erase_block);
- DEBUG(2, "region: %d read_block = %u", i, t->geo[i].read_block);
- DEBUG(2, "region: %d write_block = %u", i, t->geo[i].write_block);
- DEBUG(2, "region: %d partition = %u", i, t->geo[i].partition);
- DEBUG(2, "region: %d interleave = %u", i, t->geo[i].interleave);
+ pr_debug("region: %d bankwidth = %u\n", i, t->geo[i].buswidth);
+ pr_debug("region: %d erase_block = %u\n", i, t->geo[i].erase_block);
+ pr_debug("region: %d read_block = %u\n", i, t->geo[i].read_block);
+ pr_debug("region: %d write_block = %u\n", i, t->geo[i].write_block);
+ pr_debug("region: %d partition = %u\n", i, t->geo[i].partition);
+ pr_debug("region: %d interleave = %u\n", i, t->geo[i].interleave);
}
return 0;
}
if (p_dev->prod_id[i])
strcat(dev->mtd_name, p_dev->prod_id[i]);
}
- DEBUG(2, "Found name: %s", dev->mtd_name);
+ pr_debug("Found name: %s\n", dev->mtd_name);
}
-#ifdef CONFIG_MTD_DEBUG
pcmcia_loop_tuple(p_dev, CISTPL_FORMAT, pcmciamtd_cistpl_format, NULL);
pcmcia_loop_tuple(p_dev, CISTPL_JEDEC_C, pcmciamtd_cistpl_jedec, NULL);
-#endif
pcmcia_loop_tuple(p_dev, CISTPL_DEVICE, pcmciamtd_cistpl_device, dev);
pcmcia_loop_tuple(p_dev, CISTPL_DEVICE_GEO, pcmciamtd_cistpl_geo, dev);
if(force_size) {
dev->pcmcia_map.size = force_size << 20;
- DEBUG(2, "size forced to %dM", force_size);
+ pr_debug("size forced to %dM\n", force_size);
}
if(bankwidth) {
dev->pcmcia_map.bankwidth = bankwidth;
- DEBUG(2, "bankwidth forced to %d", bankwidth);
+ pr_debug("bankwidth forced to %d\n", bankwidth);
}
dev->pcmcia_map.name = dev->mtd_name;
*new_name = 1;
}
- DEBUG(1, "Device: Size: %lu Width:%d Name: %s",
+ pr_debug("Device: Size: %lu Width:%d Name: %s\n",
dev->pcmcia_map.size,
dev->pcmcia_map.bankwidth << 3, dev->mtd_name);
}
static char *probes[] = { "jedec_probe", "cfi_probe" };
int new_name = 0;
- DEBUG(3, "link=0x%p", link);
+ pr_debug("link=0x%p\n", link);
card_settings(dev, link, &new_name);
do {
int ret;
- DEBUG(2, "requesting window with size = %luKiB memspeed = %d",
+ pr_debug("requesting window with size = %luKiB memspeed = %d\n",
(unsigned long) resource_size(link->resource[2]) >> 10,
mem_speed);
ret = pcmcia_request_window(link, link->resource[2], mem_speed);
- DEBUG(2, "ret = %d dev->win_size = %d", ret, dev->win_size);
+ pr_debug("ret = %d dev->win_size = %d\n", ret, dev->win_size);
if(ret) {
j++;
link->resource[2]->start = 0;
force_size << 20 : MAX_PCMCIA_ADDR;
link->resource[2]->end >>= j;
} else {
- DEBUG(2, "Got window of size %luKiB", (unsigned long)
+ pr_debug("Got window of size %luKiB\n", (unsigned long)
resource_size(link->resource[2]) >> 10);
dev->win_size = resource_size(link->resource[2]);
break;
}
} while (link->resource[2]->end >= 0x1000);
- DEBUG(2, "dev->win_size = %d", dev->win_size);
+ pr_debug("dev->win_size = %d\n", dev->win_size);
if(!dev->win_size) {
dev_err(&dev->p_dev->dev, "Cannot allocate memory window\n");
pcmciamtd_release(link);
return -ENODEV;
}
- DEBUG(1, "Allocated a window of %dKiB", dev->win_size >> 10);
+ pr_debug("Allocated a window of %dKiB\n", dev->win_size >> 10);
/* Get write protect status */
dev->win_base = ioremap(link->resource[2]->start,
pcmciamtd_release(link);
return -ENODEV;
}
- DEBUG(1, "mapped window dev = %p @ %pR, base = %p",
+ pr_debug("mapped window dev = %p @ %pR, base = %p\n",
dev, link->resource[2], dev->win_base);
dev->offset = 0;
}
link->config_index = 0;
- DEBUG(2, "Setting Configuration");
+ pr_debug("Setting Configuration\n");
ret = pcmcia_enable_device(link);
if (ret != 0) {
if (dev->win_base) {
mtd = do_map_probe("map_rom", &dev->pcmcia_map);
} else {
for(i = 0; i < ARRAY_SIZE(probes); i++) {
- DEBUG(1, "Trying %s", probes[i]);
+ pr_debug("Trying %s\n", probes[i]);
mtd = do_map_probe(probes[i], &dev->pcmcia_map);
if(mtd)
break;
- DEBUG(1, "FAILED: %s", probes[i]);
+ pr_debug("FAILED: %s\n", probes[i]);
}
}
if(!mtd) {
- DEBUG(1, "Can not find an MTD");
+ pr_debug("Can not find an MTD\n");
pcmciamtd_release(link);
return -ENODEV;
}
/* If the memory found is fits completely into the mapped PCMCIA window,
use the faster non-remapping read/write functions */
if(mtd->size <= dev->win_size) {
- DEBUG(1, "Using non remapping memory functions");
+ pr_debug("Using non remapping memory functions\n");
dev->pcmcia_map.map_priv_2 = (unsigned long)dev->win_base;
if (dev->pcmcia_map.bankwidth == 1) {
dev->pcmcia_map.read = pcmcia_read8;
static int pcmciamtd_suspend(struct pcmcia_device *dev)
{
- DEBUG(2, "EVENT_PM_RESUME");
+ pr_debug("EVENT_PM_RESUME\n");
/* get_lock(link); */
static int pcmciamtd_resume(struct pcmcia_device *dev)
{
- DEBUG(2, "EVENT_PM_SUSPEND");
+ pr_debug("EVENT_PM_SUSPEND\n");
/* free_lock(link); */
{
struct pcmciamtd_dev *dev = link->priv;
- DEBUG(3, "link=0x%p", link);
+ pr_debug("link=0x%p\n", link);
if(dev->mtd_info) {
mtd_device_unregister(dev->mtd_info);
/* Create new memory card device */
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev) return -ENOMEM;
- DEBUG(1, "dev=0x%p", dev);
+ pr_debug("dev=0x%p\n", dev);
dev->p_dev = link;
link->priv = dev;
static void __exit exit_pcmciamtd(void)
{
- DEBUG(1, DRIVER_DESC " unloading");
+ pr_debug(DRIVER_DESC " unloading");
pcmcia_unregister_driver(&pcmciamtd_driver);
}
struct mtd_info *mtd[MAX_RESOURCES];
struct mtd_info *cmtd;
struct map_info map[MAX_RESOURCES];
- int nr_parts;
- struct mtd_partition *parts;
};
static int physmap_flash_remove(struct platform_device *dev)
if (info->cmtd) {
mtd_device_unregister(info->cmtd);
- if (info->nr_parts)
- kfree(info->parts);
if (info->cmtd != info->mtd[0])
mtd_concat_destroy(info->cmtd);
}
if (err)
goto err_out;
- err = parse_mtd_partitions(info->cmtd, part_probe_types,
- &info->parts, 0);
- if (err > 0) {
- mtd_device_register(info->cmtd, info->parts, err);
- info->nr_parts = err;
- return 0;
- }
-
- if (physmap_data->nr_parts) {
- printk(KERN_NOTICE "Using physmap partition information\n");
- mtd_device_register(info->cmtd, physmap_data->parts,
- physmap_data->nr_parts);
- return 0;
- }
-
- mtd_device_register(info->cmtd, NULL, 0);
-
+ mtd_device_parse_register(info->cmtd, part_probe_types, 0,
+ physmap_data->parts, physmap_data->nr_parts);
return 0;
err_out:
.num_resources = 1,
.resource = &physmap_flash_resource,
};
-
-void physmap_configure(unsigned long addr, unsigned long size,
- int bankwidth, void (*set_vpp)(struct map_info *, int))
-{
- physmap_flash_resource.start = addr;
- physmap_flash_resource.end = addr + size - 1;
- physmap_flash_data.width = bankwidth;
- physmap_flash_data.set_vpp = set_vpp;
-}
-
-void physmap_set_partitions(struct mtd_partition *parts, int num_parts)
-{
- physmap_flash_data.nr_parts = num_parts;
- physmap_flash_data.parts = parts;
-}
#endif
static int __init physmap_init(void)
struct of_flash {
struct mtd_info *cmtd;
- struct mtd_partition *parts;
int list_size; /* number of elements in of_flash_list */
struct of_flash_list list[0];
};
-#define OF_FLASH_PARTS(info) ((info)->parts)
-static int parse_obsolete_partitions(struct platform_device *dev,
- struct of_flash *info,
- struct device_node *dp)
-{
- int i, plen, nr_parts;
- const struct {
- __be32 offset, len;
- } *part;
- const char *names;
-
- part = of_get_property(dp, "partitions", &plen);
- if (!part)
- return 0; /* No partitions found */
-
- dev_warn(&dev->dev, "Device tree uses obsolete partition map binding\n");
-
- nr_parts = plen / sizeof(part[0]);
-
- info->parts = kzalloc(nr_parts * sizeof(*info->parts), GFP_KERNEL);
- if (!info->parts)
- return -ENOMEM;
-
- names = of_get_property(dp, "partition-names", &plen);
-
- for (i = 0; i < nr_parts; i++) {
- info->parts[i].offset = be32_to_cpu(part->offset);
- info->parts[i].size = be32_to_cpu(part->len) & ~1;
- if (be32_to_cpu(part->len) & 1) /* bit 0 set signifies read only partition */
- info->parts[i].mask_flags = MTD_WRITEABLE;
-
- if (names && (plen > 0)) {
- int len = strlen(names) + 1;
-
- info->parts[i].name = (char *)names;
- plen -= len;
- names += len;
- } else {
- info->parts[i].name = "unnamed";
- }
-
- part++;
- }
-
- return nr_parts;
-}
-
static int of_flash_remove(struct platform_device *dev)
{
struct of_flash *info;
mtd_concat_destroy(info->cmtd);
}
- if (info->cmtd) {
- if (OF_FLASH_PARTS(info))
- kfree(OF_FLASH_PARTS(info));
+ if (info->cmtd)
mtd_device_unregister(info->cmtd);
- }
for (i = 0; i < info->list_size; i++) {
if (info->list[i].mtd)
specifies the list of partition probers to use. If none is given then the
default is use. These take precedence over other device tree
information. */
-static const char *part_probe_types_def[] = { "cmdlinepart", "RedBoot", NULL };
+static const char *part_probe_types_def[] = { "cmdlinepart", "RedBoot",
+ "ofpart", "ofoldpart", NULL };
static const char ** __devinit of_get_probes(struct device_node *dp)
{
const char *cp;
int reg_tuple_size;
struct mtd_info **mtd_list = NULL;
resource_size_t res_size;
+ struct mtd_part_parser_data ppdata;
match = of_match_device(of_flash_match, &dev->dev);
if (!match)
if (err)
goto err_out;
+ ppdata.of_node = dp;
part_probe_types = of_get_probes(dp);
- err = parse_mtd_partitions(info->cmtd, part_probe_types,
- &info->parts, 0);
- if (err < 0) {
- of_free_probes(part_probe_types);
- goto err_out;
- }
+ mtd_device_parse_register(info->cmtd, part_probe_types, &ppdata,
+ NULL, 0);
of_free_probes(part_probe_types);
- if (err == 0) {
- err = of_mtd_parse_partitions(&dev->dev, dp, &info->parts);
- if (err < 0)
- goto err_out;
- }
-
- if (err == 0) {
- err = parse_obsolete_partitions(dev, info, dp);
- if (err < 0)
- goto err_out;
- }
-
- mtd_device_register(info->cmtd, info->parts, err);
-
kfree(mtd_list);
return 0;
struct device *dev;
struct mtd_info *mtd;
struct map_info map;
- struct mtd_partition *partitions;
- bool free_partitions;
struct resource *area;
struct platdata_mtd_ram *pdata;
};
if (info->mtd) {
mtd_device_unregister(info->mtd);
- if (info->partitions) {
- if (info->free_partitions)
- kfree(info->partitions);
- }
map_destroy(info->mtd);
}
/* check to see if there are any available partitions, or wether
* to add this device whole */
- if (!pdata->nr_partitions) {
- /* try to probe using the supplied probe type */
- if (pdata->probes) {
- err = parse_mtd_partitions(info->mtd, pdata->probes,
- &info->partitions, 0);
- info->free_partitions = 1;
- if (err > 0)
- err = mtd_device_register(info->mtd,
- info->partitions, err);
- }
- }
- /* use the static mapping */
- else
- err = mtd_device_register(info->mtd, pdata->partitions,
- pdata->nr_partitions);
+ err = mtd_device_parse_register(info->mtd, pdata->probes, 0,
+ pdata->partitions, pdata->nr_partitions);
if (!err)
dev_info(&pdev->dev, "registered mtd device\n");
}
struct pxa2xx_flash_info {
- struct mtd_partition *parts;
- int nr_parts;
struct mtd_info *mtd;
struct map_info map;
};
{
struct flash_platform_data *flash = pdev->dev.platform_data;
struct pxa2xx_flash_info *info;
- struct mtd_partition *parts;
struct resource *res;
- int ret = 0;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
info->map.bankwidth = flash->width;
info->map.phys = res->start;
info->map.size = resource_size(res);
- info->parts = flash->parts;
- info->nr_parts = flash->nr_parts;
info->map.virt = ioremap(info->map.phys, info->map.size);
if (!info->map.virt) {
}
info->mtd->owner = THIS_MODULE;
- ret = parse_mtd_partitions(info->mtd, probes, &parts, 0);
-
- if (ret > 0) {
- info->nr_parts = ret;
- info->parts = parts;
- }
-
- if (!info->nr_parts)
- printk("Registering %s as whole device\n",
- info->map.name);
-
- mtd_device_register(info->mtd, info->parts, info->nr_parts);
+ mtd_device_parse_register(info->mtd, probes, 0, NULL, 0);
platform_set_drvdata(pdev, info);
return 0;
iounmap(info->map.virt);
if (info->map.cached)
iounmap(info->map.cached);
- kfree(info->parts);
kfree(info);
return 0;
}
struct rbtx4939_flash_info {
struct mtd_info *mtd;
struct map_info map;
- int nr_parts;
- struct mtd_partition *parts;
};
static int rbtx4939_flash_remove(struct platform_device *dev)
if (info->mtd) {
struct rbtx4939_flash_data *pdata = dev->dev.platform_data;
- if (info->nr_parts)
- kfree(info->parts);
mtd_device_unregister(info->mtd);
map_destroy(info->mtd);
}
}
static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL };
-static const char *part_probe_types[] = { "cmdlinepart", NULL };
static int rbtx4939_flash_probe(struct platform_device *dev)
{
info->mtd->owner = THIS_MODULE;
if (err)
goto err_out;
+ err = mtd_device_parse_register(info->mtd, NULL, 0,
+ pdata->parts, pdata->nr_parts);
- err = parse_mtd_partitions(info->mtd, part_probe_types,
- &info->parts, 0);
- if (err > 0) {
- mtd_device_register(info->mtd, info->parts, err);
- info->nr_parts = err;
- return 0;
- }
-
- if (pdata->nr_parts) {
- pr_notice("Using rbtx4939 partition information\n");
- mtd_device_register(info->mtd, pdata->parts, pdata->nr_parts);
- return 0;
- }
-
- mtd_device_register(info->mtd, NULL, 0);
+ if (err)
+ goto err_out;
return 0;
err_out:
};
struct sa_info {
- struct mtd_partition *parts;
struct mtd_info *mtd;
int num_subdev;
- unsigned int nr_parts;
struct sa_subdev_info subdev[0];
};
mtd_concat_destroy(info->mtd);
}
- kfree(info->parts);
-
for (i = info->num_subdev - 1; i >= 0; i--)
sa1100_destroy_subdev(&info->subdev[i]);
kfree(info);
static int __devinit sa1100_mtd_probe(struct platform_device *pdev)
{
struct flash_platform_data *plat = pdev->dev.platform_data;
- struct mtd_partition *parts;
- const char *part_type = NULL;
struct sa_info *info;
- int err, nr_parts = 0;
+ int err;
if (!plat)
return -ENODEV;
/*
* Partition selection stuff.
*/
- nr_parts = parse_mtd_partitions(info->mtd, part_probes, &parts, 0);
- if (nr_parts > 0) {
- info->parts = parts;
- part_type = "dynamic";
- } else {
- parts = plat->parts;
- nr_parts = plat->nr_parts;
- part_type = "static";
- }
-
- if (nr_parts == 0)
- printk(KERN_NOTICE "SA1100 flash: no partition info "
- "available, registering whole flash\n");
- else
- printk(KERN_NOTICE "SA1100 flash: using %s partition "
- "definition\n", part_type);
-
- mtd_device_register(info->mtd, parts, nr_parts);
-
- info->nr_parts = nr_parts;
+ mtd_device_parse_register(info->mtd, part_probes, 0,
+ plat->parts, plat->nr_parts);
platform_set_drvdata(pdev, info);
err = 0;
static struct mtd_info *flash_mtd;
static struct mtd_info *eprom_mtd;
-static struct mtd_partition *parsed_parts;
-
struct map_info soleng_eprom_map = {
.name = "Solution Engine EPROM",
.size = 0x400000,
.size = MTDPART_SIZ_FULL,
}
};
+#define NUM_PARTITIONS ARRAY_SIZE(superh_se_partitions)
+#else
+#define superh_se_partitions NULL
+#define NUM_PARTITIONS 0
#endif /* CONFIG_MTD_SUPERH_RESERVE */
static int __init init_soleng_maps(void)
{
- int nr_parts = 0;
-
/* First probe at offset 0 */
soleng_flash_map.phys = 0;
soleng_flash_map.virt = (void __iomem *)P2SEGADDR(0);
mtd_device_register(eprom_mtd, NULL, 0);
}
- nr_parts = parse_mtd_partitions(flash_mtd, probes, &parsed_parts, 0);
-
-#ifdef CONFIG_MTD_SUPERH_RESERVE
- if (nr_parts <= 0) {
- printk(KERN_NOTICE "Using configured partition at 0x%08x.\n",
- CONFIG_MTD_SUPERH_RESERVE);
- parsed_parts = superh_se_partitions;
- nr_parts = sizeof(superh_se_partitions)/sizeof(*parsed_parts);
- }
-#endif /* CONFIG_MTD_SUPERH_RESERVE */
-
- if (nr_parts > 0)
- mtd_device_register(flash_mtd, parsed_parts, nr_parts);
- else
- mtd_device_register(flash_mtd, NULL, 0);
+ mtd_device_parse_register(flash_mtd, probes, 0,
+ superh_se_partitions, NUM_PARTITIONS);
return 0;
}
map_destroy(eprom_mtd);
}
- if (parsed_parts)
- mtd_device_unregister(flash_mtd);
- else
- mtd_device_unregister(flash_mtd);
+ mtd_device_unregister(flash_mtd);
map_destroy(flash_mtd);
}
#include <asm/immap_cpm2.h>
static struct mtd_info *sbcmtd[3];
-static struct mtd_partition *sbcmtd_parts[3];
struct map_info sbc82xx_flash_map[3] = {
{.name = "Boot flash"},
for (i=0; i<3; i++) {
int8_t flashcs[3] = { 0, 6, 1 };
int nr_parts;
+ struct mtd_partition *defparts;
printk(KERN_NOTICE "PowerQUICC II %s (%ld MiB on CS%d",
sbc82xx_flash_map[i].name,
}
printk(" at %08lx)\n", sbc82xx_flash_map[i].phys);
- sbc82xx_flash_map[i].virt = ioremap(sbc82xx_flash_map[i].phys, sbc82xx_flash_map[i].size);
+ sbc82xx_flash_map[i].virt = ioremap(sbc82xx_flash_map[i].phys,
+ sbc82xx_flash_map[i].size);
if (!sbc82xx_flash_map[i].virt) {
printk("Failed to ioremap\n");
sbcmtd[i]->owner = THIS_MODULE;
- nr_parts = parse_mtd_partitions(sbcmtd[i], part_probes,
- &sbcmtd_parts[i], 0);
- if (nr_parts > 0) {
- mtd_device_register(sbcmtd[i], sbcmtd_parts[i],
- nr_parts);
- continue;
- }
-
/* No partitioning detected. Use default */
if (i == 2) {
- mtd_device_register(sbcmtd[i], NULL, 0);
+ defparts = NULL;
+ nr_parts = 0;
} else if (i == bigflash) {
- mtd_device_register(sbcmtd[i], bigflash_parts,
- ARRAY_SIZE(bigflash_parts));
+ defparts = bigflash_parts;
+ nr_parts = ARRAY_SIZE(bigflash_parts);
} else {
- mtd_device_register(sbcmtd[i], smallflash_parts,
- ARRAY_SIZE(smallflash_parts));
+ defparts = smallflash_parts;
+ nr_parts = ARRAY_SIZE(smallflash_parts);
}
+
+ mtd_device_parse_register(sbcmtd[i], part_probes, 0,
+ defparts, nr_parts);
}
return 0;
}
if (!sbcmtd[i])
continue;
- if (i<2 || sbcmtd_parts[i])
- mtd_device_unregister(sbcmtd[i]);
- else
- mtd_device_unregister(sbcmtd[i]);
+ mtd_device_unregister(sbcmtd[i]);
- kfree(sbcmtd_parts[i]);
map_destroy(sbcmtd[i]);
iounmap((void *)sbc82xx_flash_map[i].virt);
new->rq->queuedata = new;
blk_queue_logical_block_size(new->rq, tr->blksize);
+ queue_flag_set_unlocked(QUEUE_FLAG_NONROT, new->rq);
+
if (tr->discard) {
queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, new->rq);
new->rq->limits.max_discard_sectors = UINT_MAX;
enum { STATE_EMPTY, STATE_CLEAN, STATE_DIRTY } cache_state;
};
-static struct mutex mtdblks_lock;
+static DEFINE_MUTEX(mtdblks_lock);
/*
* Cache stuff...
if (mtdblk->cache_state != STATE_DIRTY)
return 0;
- DEBUG(MTD_DEBUG_LEVEL2, "mtdblock: writing cached data for \"%s\" "
+ pr_debug("mtdblock: writing cached data for \"%s\" "
"at 0x%lx, size 0x%x\n", mtd->name,
mtdblk->cache_offset, mtdblk->cache_size);
size_t retlen;
int ret;
- DEBUG(MTD_DEBUG_LEVEL2, "mtdblock: write on \"%s\" at 0x%lx, size 0x%x\n",
+ pr_debug("mtdblock: write on \"%s\" at 0x%lx, size 0x%x\n",
mtd->name, pos, len);
if (!sect_size)
size_t retlen;
int ret;
- DEBUG(MTD_DEBUG_LEVEL2, "mtdblock: read on \"%s\" at 0x%lx, size 0x%x\n",
+ pr_debug("mtdblock: read on \"%s\" at 0x%lx, size 0x%x\n",
mtd->name, pos, len);
if (!sect_size)
{
struct mtdblk_dev *mtdblk = container_of(mbd, struct mtdblk_dev, mbd);
- DEBUG(MTD_DEBUG_LEVEL1,"mtdblock_open\n");
+ pr_debug("mtdblock_open\n");
mutex_lock(&mtdblks_lock);
if (mtdblk->count) {
mutex_unlock(&mtdblks_lock);
- DEBUG(MTD_DEBUG_LEVEL1, "ok\n");
+ pr_debug("ok\n");
return 0;
}
{
struct mtdblk_dev *mtdblk = container_of(mbd, struct mtdblk_dev, mbd);
- DEBUG(MTD_DEBUG_LEVEL1, "mtdblock_release\n");
+ pr_debug("mtdblock_release\n");
mutex_lock(&mtdblks_lock);
mutex_unlock(&mtdblks_lock);
- DEBUG(MTD_DEBUG_LEVEL1, "ok\n");
+ pr_debug("ok\n");
return 0;
}
static int __init init_mtdblock(void)
{
- mutex_init(&mtdblks_lock);
-
return register_mtd_blktrans(&mtdblock_tr);
}
#include <linux/slab.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/blktrans.h>
+#include <linux/module.h>
static int mtdblock_readsect(struct mtd_blktrans_dev *dev,
unsigned long block, char *buf)
/*
* Data structure to hold the pointer to the mtd device as well
- * as mode information ofr various use cases.
+ * as mode information of various use cases.
*/
struct mtd_file_info {
struct mtd_info *mtd;
struct mtd_file_info *mfi;
struct inode *mtd_ino;
- DEBUG(MTD_DEBUG_LEVEL0, "MTD_open\n");
+ pr_debug("MTD_open\n");
/* You can't open the RO devices RW */
if ((file->f_mode & FMODE_WRITE) && (minor & 1))
struct mtd_file_info *mfi = file->private_data;
struct mtd_info *mtd = mfi->mtd;
- DEBUG(MTD_DEBUG_LEVEL0, "MTD_close\n");
+ pr_debug("MTD_close\n");
/* Only sync if opened RW */
if ((file->f_mode & FMODE_WRITE) && mtd->sync)
size_t size = count;
char *kbuf;
- DEBUG(MTD_DEBUG_LEVEL0,"MTD_read\n");
+ pr_debug("MTD_read\n");
if (*ppos + count > mtd->size)
count = mtd->size - *ppos;
len = min_t(size_t, count, size);
switch (mfi->mode) {
- case MTD_MODE_OTP_FACTORY:
+ case MTD_FILE_MODE_OTP_FACTORY:
ret = mtd->read_fact_prot_reg(mtd, *ppos, len, &retlen, kbuf);
break;
- case MTD_MODE_OTP_USER:
+ case MTD_FILE_MODE_OTP_USER:
ret = mtd->read_user_prot_reg(mtd, *ppos, len, &retlen, kbuf);
break;
- case MTD_MODE_RAW:
+ case MTD_FILE_MODE_RAW:
{
struct mtd_oob_ops ops;
- ops.mode = MTD_OOB_RAW;
+ ops.mode = MTD_OPS_RAW;
ops.datbuf = kbuf;
ops.oobbuf = NULL;
ops.len = len;
default:
ret = mtd->read(mtd, *ppos, len, &retlen, kbuf);
}
- /* Nand returns -EBADMSG on ecc errors, but it returns
+ /* Nand returns -EBADMSG on ECC errors, but it returns
* the data. For our userspace tools it is important
- * to dump areas with ecc errors !
+ * to dump areas with ECC errors!
* For kernel internal usage it also might return -EUCLEAN
* to signal the caller that a bitflip has occurred and has
* been corrected by the ECC algorithm.
* Userspace software which accesses NAND this way
* must be aware of the fact that it deals with NAND
*/
- if (!ret || (ret == -EUCLEAN) || (ret == -EBADMSG)) {
+ if (!ret || mtd_is_bitflip_or_eccerr(ret)) {
*ppos += retlen;
if (copy_to_user(buf, kbuf, retlen)) {
kfree(kbuf);
int ret=0;
int len;
- DEBUG(MTD_DEBUG_LEVEL0,"MTD_write\n");
+ pr_debug("MTD_write\n");
if (*ppos == mtd->size)
return -ENOSPC;
}
switch (mfi->mode) {
- case MTD_MODE_OTP_FACTORY:
+ case MTD_FILE_MODE_OTP_FACTORY:
ret = -EROFS;
break;
- case MTD_MODE_OTP_USER:
+ case MTD_FILE_MODE_OTP_USER:
if (!mtd->write_user_prot_reg) {
ret = -EOPNOTSUPP;
break;
ret = mtd->write_user_prot_reg(mtd, *ppos, len, &retlen, kbuf);
break;
- case MTD_MODE_RAW:
+ case MTD_FILE_MODE_RAW:
{
struct mtd_oob_ops ops;
- ops.mode = MTD_OOB_RAW;
+ ops.mode = MTD_OPS_RAW;
ops.datbuf = kbuf;
ops.oobbuf = NULL;
+ ops.ooboffs = 0;
ops.len = len;
ret = mtd->write_oob(mtd, *ppos, &ops);
if (!mtd->read_fact_prot_reg)
ret = -EOPNOTSUPP;
else
- mfi->mode = MTD_MODE_OTP_FACTORY;
+ mfi->mode = MTD_FILE_MODE_OTP_FACTORY;
break;
case MTD_OTP_USER:
if (!mtd->read_fact_prot_reg)
ret = -EOPNOTSUPP;
else
- mfi->mode = MTD_MODE_OTP_USER;
+ mfi->mode = MTD_FILE_MODE_OTP_USER;
break;
default:
ret = -EINVAL;
uint64_t start, uint32_t length, void __user *ptr,
uint32_t __user *retp)
{
+ struct mtd_file_info *mfi = file->private_data;
struct mtd_oob_ops ops;
uint32_t retlen;
int ret = 0;
return ret;
ops.ooblen = length;
- ops.ooboffs = start & (mtd->oobsize - 1);
+ ops.ooboffs = start & (mtd->writesize - 1);
ops.datbuf = NULL;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = (mfi->mode == MTD_FILE_MODE_RAW) ? MTD_OPS_RAW :
+ MTD_OPS_PLACE_OOB;
if (ops.ooboffs && ops.ooblen > (mtd->oobsize - ops.ooboffs))
return -EINVAL;
if (IS_ERR(ops.oobbuf))
return PTR_ERR(ops.oobbuf);
- start &= ~((uint64_t)mtd->oobsize - 1);
+ start &= ~((uint64_t)mtd->writesize - 1);
ret = mtd->write_oob(mtd, start, &ops);
if (ops.oobretlen > 0xFFFFFFFFU)
return ret;
}
-static int mtd_do_readoob(struct mtd_info *mtd, uint64_t start,
- uint32_t length, void __user *ptr, uint32_t __user *retp)
+static int mtd_do_readoob(struct file *file, struct mtd_info *mtd,
+ uint64_t start, uint32_t length, void __user *ptr,
+ uint32_t __user *retp)
{
+ struct mtd_file_info *mfi = file->private_data;
struct mtd_oob_ops ops;
int ret = 0;
return ret;
ops.ooblen = length;
- ops.ooboffs = start & (mtd->oobsize - 1);
+ ops.ooboffs = start & (mtd->writesize - 1);
ops.datbuf = NULL;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = (mfi->mode == MTD_FILE_MODE_RAW) ? MTD_OPS_RAW :
+ MTD_OPS_PLACE_OOB;
if (ops.ooboffs && ops.ooblen > (mtd->oobsize - ops.ooboffs))
return -EINVAL;
if (!ops.oobbuf)
return -ENOMEM;
- start &= ~((uint64_t)mtd->oobsize - 1);
+ start &= ~((uint64_t)mtd->writesize - 1);
ret = mtd->read_oob(mtd, start, &ops);
if (put_user(ops.oobretlen, retp))
ret = -EFAULT;
kfree(ops.oobbuf);
+
+ /*
+ * NAND returns -EBADMSG on ECC errors, but it returns the OOB
+ * data. For our userspace tools it is important to dump areas
+ * with ECC errors!
+ * For kernel internal usage it also might return -EUCLEAN
+ * to signal the caller that a bitflip has occured and has
+ * been corrected by the ECC algorithm.
+ *
+ * Note: currently the standard NAND function, nand_read_oob_std,
+ * does not calculate ECC for the OOB area, so do not rely on
+ * this behavior unless you have replaced it with your own.
+ */
+ if (mtd_is_bitflip_or_eccerr(ret))
+ return 0;
+
return ret;
}
/*
* Copies (and truncates, if necessary) data from the larger struct,
* nand_ecclayout, to the smaller, deprecated layout struct,
- * nand_ecclayout_user. This is necessary only to suppport the deprecated
+ * nand_ecclayout_user. This is necessary only to support the deprecated
* API ioctl ECCGETLAYOUT while allowing all new functionality to use
* nand_ecclayout flexibly (i.e. the struct may change size in new
* releases without requiring major rewrites).
}
}
+static int mtd_write_ioctl(struct mtd_info *mtd,
+ struct mtd_write_req __user *argp)
+{
+ struct mtd_write_req req;
+ struct mtd_oob_ops ops;
+ void __user *usr_data, *usr_oob;
+ int ret;
+
+ if (copy_from_user(&req, argp, sizeof(req)) ||
+ !access_ok(VERIFY_READ, req.usr_data, req.len) ||
+ !access_ok(VERIFY_READ, req.usr_oob, req.ooblen))
+ return -EFAULT;
+ if (!mtd->write_oob)
+ return -EOPNOTSUPP;
+
+ ops.mode = req.mode;
+ ops.len = (size_t)req.len;
+ ops.ooblen = (size_t)req.ooblen;
+ ops.ooboffs = 0;
+
+ usr_data = (void __user *)(uintptr_t)req.usr_data;
+ usr_oob = (void __user *)(uintptr_t)req.usr_oob;
+
+ if (req.usr_data) {
+ ops.datbuf = memdup_user(usr_data, ops.len);
+ if (IS_ERR(ops.datbuf))
+ return PTR_ERR(ops.datbuf);
+ } else {
+ ops.datbuf = NULL;
+ }
+
+ if (req.usr_oob) {
+ ops.oobbuf = memdup_user(usr_oob, ops.ooblen);
+ if (IS_ERR(ops.oobbuf)) {
+ kfree(ops.datbuf);
+ return PTR_ERR(ops.oobbuf);
+ }
+ } else {
+ ops.oobbuf = NULL;
+ }
+
+ ret = mtd->write_oob(mtd, (loff_t)req.start, &ops);
+
+ kfree(ops.datbuf);
+ kfree(ops.oobbuf);
+
+ return ret;
+}
+
static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
{
struct mtd_file_info *mfi = file->private_data;
u_long size;
struct mtd_info_user info;
- DEBUG(MTD_DEBUG_LEVEL0, "MTD_ioctl\n");
+ pr_debug("MTD_ioctl\n");
size = (cmd & IOCSIZE_MASK) >> IOCSIZE_SHIFT;
if (cmd & IOC_IN) {
info.erasesize = mtd->erasesize;
info.writesize = mtd->writesize;
info.oobsize = mtd->oobsize;
- /* The below fields are obsolete */
- info.ecctype = -1;
+ /* The below field is obsolete */
+ info.padding = 0;
if (copy_to_user(argp, &info, sizeof(struct mtd_info_user)))
return -EFAULT;
break;
if (copy_from_user(&buf, argp, sizeof(buf)))
ret = -EFAULT;
else
- ret = mtd_do_readoob(mtd, buf.start, buf.length,
+ ret = mtd_do_readoob(file, mtd, buf.start, buf.length,
buf.ptr, &buf_user->start);
break;
}
if (copy_from_user(&buf, argp, sizeof(buf)))
ret = -EFAULT;
else
- ret = mtd_do_readoob(mtd, buf.start, buf.length,
+ ret = mtd_do_readoob(file, mtd, buf.start, buf.length,
(void __user *)(uintptr_t)buf.usr_ptr,
&buf_user->length);
break;
}
+ case MEMWRITE:
+ {
+ ret = mtd_write_ioctl(mtd,
+ (struct mtd_write_req __user *)arg);
+ break;
+ }
+
case MEMLOCK:
{
struct erase_info_user einfo;
if (copy_from_user(&mode, argp, sizeof(int)))
return -EFAULT;
- mfi->mode = MTD_MODE_NORMAL;
+ mfi->mode = MTD_FILE_MODE_NORMAL;
ret = otp_select_filemode(mfi, mode);
return -ENOMEM;
ret = -EOPNOTSUPP;
switch (mfi->mode) {
- case MTD_MODE_OTP_FACTORY:
+ case MTD_FILE_MODE_OTP_FACTORY:
if (mtd->get_fact_prot_info)
ret = mtd->get_fact_prot_info(mtd, buf, 4096);
break;
- case MTD_MODE_OTP_USER:
+ case MTD_FILE_MODE_OTP_USER:
if (mtd->get_user_prot_info)
ret = mtd->get_user_prot_info(mtd, buf, 4096);
break;
{
struct otp_info oinfo;
- if (mfi->mode != MTD_MODE_OTP_USER)
+ if (mfi->mode != MTD_FILE_MODE_OTP_USER)
return -EINVAL;
if (copy_from_user(&oinfo, argp, sizeof(oinfo)))
return -EFAULT;
}
#endif
- /* This ioctl is being deprecated - it truncates the ecc layout */
+ /* This ioctl is being deprecated - it truncates the ECC layout */
case ECCGETLAYOUT:
{
struct nand_ecclayout_user *usrlay;
mfi->mode = 0;
switch(arg) {
- case MTD_MODE_OTP_FACTORY:
- case MTD_MODE_OTP_USER:
+ case MTD_FILE_MODE_OTP_FACTORY:
+ case MTD_FILE_MODE_OTP_USER:
ret = otp_select_filemode(mfi, arg);
break;
- case MTD_MODE_RAW:
+ case MTD_FILE_MODE_RAW:
if (!mtd->read_oob || !mtd->write_oob)
return -EOPNOTSUPP;
mfi->mode = arg;
- case MTD_MODE_NORMAL:
+ case MTD_FILE_MODE_NORMAL:
break;
default:
ret = -EINVAL;
if (copy_from_user(&buf, argp, sizeof(buf)))
ret = -EFAULT;
else
- ret = mtd_do_readoob(mtd, buf.start,
+ ret = mtd_do_readoob(file, mtd, buf.start,
buf.length, compat_ptr(buf.ptr),
&buf_user->start);
break;
/* Save information about bitflips! */
if (unlikely(err)) {
- if (err == -EBADMSG) {
+ if (mtd_is_eccerr(err)) {
mtd->ecc_stats.failed++;
ret = err;
- } else if (err == -EUCLEAN) {
+ } else if (mtd_is_bitflip(err)) {
mtd->ecc_stats.corrected++;
/* Do not overwrite -EBADMSG !! */
if (!ret)
/* Save information about bitflips! */
if (unlikely(err)) {
- if (err == -EBADMSG) {
+ if (mtd_is_eccerr(err)) {
mtd->ecc_stats.failed++;
ret = err;
- } else if (err == -EUCLEAN) {
+ } else if (mtd_is_bitflip(err)) {
mtd->ecc_stats.corrected++;
/* Do not overwrite -EBADMSG !! */
if (!ret)
/*
* Set up the new "super" device's MTD object structure, check for
- * incompatibilites between the subdevices.
+ * incompatibilities between the subdevices.
*/
concat->mtd.type = subdev[0]->type;
concat->mtd.flags = subdev[0]->flags;
MTD_DEVT(i) + 1,
NULL, "mtd%dro", i);
- DEBUG(0, "mtd: Giving out device %d to %s\n", i, mtd->name);
+ pr_debug("mtd: Giving out device %d to %s\n", i, mtd->name);
/* No need to get a refcount on the module containing
the notifier, since we hold the mtd_table_mutex */
list_for_each_entry(not, &mtd_notifiers, list)
}
/**
- * mtd_device_register - register an MTD device.
+ * mtd_device_parse_register - parse partitions and register an MTD device.
*
- * @master: the MTD device to register
- * @parts: the partitions to register - only valid if nr_parts > 0
- * @nr_parts: the number of partitions in parts. If zero then the full MTD
- * device is registered
+ * @mtd: the MTD device to register
+ * @types: the list of MTD partition probes to try, see
+ * 'parse_mtd_partitions()' for more information
+ * @parser_data: MTD partition parser-specific data
+ * @parts: fallback partition information to register, if parsing fails;
+ * only valid if %nr_parts > %0
+ * @nr_parts: the number of partitions in parts, if zero then the full
+ * MTD device is registered if no partition info is found
*
- * Register an MTD device with the system and optionally, a number of
- * partitions. If nr_parts is 0 then the whole device is registered, otherwise
- * only the partitions are registered. To register both the full device *and*
- * the partitions, call mtd_device_register() twice, once with nr_parts == 0
- * and once equal to the number of partitions.
+ * This function aggregates MTD partitions parsing (done by
+ * 'parse_mtd_partitions()') and MTD device and partitions registering. It
+ * basically follows the most common pattern found in many MTD drivers:
+ *
+ * * It first tries to probe partitions on MTD device @mtd using parsers
+ * specified in @types (if @types is %NULL, then the default list of parsers
+ * is used, see 'parse_mtd_partitions()' for more information). If none are
+ * found this functions tries to fallback to information specified in
+ * @parts/@nr_parts.
+ * * If any partitioning info was found, this function registers the found
+ * partitions.
+ * * If no partitions were found this function just registers the MTD device
+ * @mtd and exits.
+ *
+ * Returns zero in case of success and a negative error code in case of failure.
*/
-int mtd_device_register(struct mtd_info *master,
- const struct mtd_partition *parts,
- int nr_parts)
+int mtd_device_parse_register(struct mtd_info *mtd, const char **types,
+ struct mtd_part_parser_data *parser_data,
+ const struct mtd_partition *parts,
+ int nr_parts)
{
- return parts ? add_mtd_partitions(master, parts, nr_parts) :
- add_mtd_device(master);
+ int err;
+ struct mtd_partition *real_parts;
+
+ err = parse_mtd_partitions(mtd, types, &real_parts, parser_data);
+ if (err <= 0 && nr_parts && parts) {
+ real_parts = kmemdup(parts, sizeof(*parts) * nr_parts,
+ GFP_KERNEL);
+ if (!real_parts)
+ err = -ENOMEM;
+ else
+ err = nr_parts;
+ }
+
+ if (err > 0) {
+ err = add_mtd_partitions(mtd, real_parts, err);
+ kfree(real_parts);
+ } else if (err == 0) {
+ err = add_mtd_device(mtd);
+ if (err == 1)
+ err = -ENODEV;
+ }
+
+ return err;
}
-EXPORT_SYMBOL_GPL(mtd_device_register);
+EXPORT_SYMBOL_GPL(mtd_device_parse_register);
/**
* mtd_device_unregister - unregister an existing MTD device.
extern int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *,
int);
extern int del_mtd_partitions(struct mtd_info *);
+extern int parse_mtd_partitions(struct mtd_info *master, const char **types,
+ struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data);
#define mtd_for_each_device(mtd) \
for ((mtd) = __mtd_next_device(0); \
ret = mtd->read(mtd, page * record_size, MTDOOPS_HEADER_SIZE,
&retlen, (u_char *) &count[0]);
if (retlen != MTDOOPS_HEADER_SIZE ||
- (ret < 0 && ret != -EUCLEAN)) {
+ (ret < 0 && !mtd_is_bitflip(ret))) {
printk(KERN_ERR "mtdoops: read failure at %ld (%td of %d read), err %d\n",
page * record_size, retlen,
MTDOOPS_HEADER_SIZE, ret);
res = part->master->read(part->master, from + part->offset,
len, retlen, buf);
if (unlikely(res)) {
- if (res == -EUCLEAN)
+ if (mtd_is_bitflip(res))
mtd->ecc_stats.corrected += part->master->ecc_stats.corrected - stats.corrected;
- if (res == -EBADMSG)
+ if (mtd_is_eccerr(res))
mtd->ecc_stats.failed += part->master->ecc_stats.failed - stats.failed;
}
return res;
if (ops->oobbuf) {
size_t len, pages;
- if (ops->mode == MTD_OOB_AUTO)
+ if (ops->mode == MTD_OPS_AUTO_OOB)
len = mtd->oobavail;
else
len = mtd->oobsize;
res = part->master->read_oob(part->master, from + part->offset, ops);
if (unlikely(res)) {
- if (res == -EUCLEAN)
+ if (mtd_is_bitflip(res))
mtd->ecc_stats.corrected++;
- if (res == -EBADMSG)
+ if (mtd_is_eccerr(res))
mtd->ecc_stats.failed++;
}
return res;
(unsigned long long)cur_offset, (unsigned long long)slave->offset);
}
}
+ if (slave->offset == MTDPART_OFS_RETAIN) {
+ slave->offset = cur_offset;
+ if (master->size - slave->offset >= slave->mtd.size) {
+ slave->mtd.size = master->size - slave->offset
+ - slave->mtd.size;
+ } else {
+ printk(KERN_ERR "mtd partition \"%s\" doesn't have enough space: %#llx < %#llx, disabled\n",
+ part->name, master->size - slave->offset,
+ slave->mtd.size);
+ /* register to preserve ordering */
+ goto out_register;
+ }
+ }
if (slave->mtd.size == MTDPART_SIZ_FULL)
slave->mtd.size = master->size - slave->offset;
return ret;
}
+#define put_partition_parser(p) do { module_put((p)->owner); } while (0)
+
int register_mtd_parser(struct mtd_part_parser *p)
{
spin_lock(&part_parser_lock);
}
EXPORT_SYMBOL_GPL(deregister_mtd_parser);
+/*
+ * Do not forget to update 'parse_mtd_partitions()' kerneldoc comment if you
+ * are changing this array!
+ */
+static const char *default_mtd_part_types[] = {
+ "cmdlinepart",
+ "ofpart",
+ NULL
+};
+
+/**
+ * parse_mtd_partitions - parse MTD partitions
+ * @master: the master partition (describes whole MTD device)
+ * @types: names of partition parsers to try or %NULL
+ * @pparts: array of partitions found is returned here
+ * @data: MTD partition parser-specific data
+ *
+ * This function tries to find partition on MTD device @master. It uses MTD
+ * partition parsers, specified in @types. However, if @types is %NULL, then
+ * the default list of parsers is used. The default list contains only the
+ * "cmdlinepart" and "ofpart" parsers ATM.
+ *
+ * This function may return:
+ * o a negative error code in case of failure
+ * o zero if no partitions were found
+ * o a positive number of found partitions, in which case on exit @pparts will
+ * point to an array containing this number of &struct mtd_info objects.
+ */
int parse_mtd_partitions(struct mtd_info *master, const char **types,
- struct mtd_partition **pparts, unsigned long origin)
+ struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
{
struct mtd_part_parser *parser;
int ret = 0;
+ if (!types)
+ types = default_mtd_part_types;
+
for ( ; ret <= 0 && *types; types++) {
parser = get_partition_parser(*types);
if (!parser && !request_module("%s", *types))
parser = get_partition_parser(*types);
if (!parser)
continue;
- ret = (*parser->parse_fn)(master, pparts, origin);
+ ret = (*parser->parse_fn)(master, pparts, data);
if (ret > 0) {
printk(KERN_NOTICE "%d %s partitions found on MTD device %s\n",
ret, parser->name, master->name);
}
return ret;
}
-EXPORT_SYMBOL_GPL(parse_mtd_partitions);
int mtd_is_partition(struct mtd_info *mtd)
{
#include <linux/mtd/super.h>
#include <linux/namei.h>
+#include <linux/export.h>
#include <linux/ctype.h>
#include <linux/slab.h>
struct mtd_info *mtd = _mtd;
if (sb->s_mtd == mtd) {
- DEBUG(2, "MTDSB: Match on device %d (\"%s\")\n",
+ pr_debug("MTDSB: Match on device %d (\"%s\")\n",
mtd->index, mtd->name);
return 1;
}
- DEBUG(2, "MTDSB: No match, device %d (\"%s\"), device %d (\"%s\")\n",
+ pr_debug("MTDSB: No match, device %d (\"%s\"), device %d (\"%s\")\n",
sb->s_mtd->index, sb->s_mtd->name, mtd->index, mtd->name);
return 0;
}
goto already_mounted;
/* fresh new superblock */
- DEBUG(1, "MTDSB: New superblock for device %d (\"%s\")\n",
+ pr_debug("MTDSB: New superblock for device %d (\"%s\")\n",
mtd->index, mtd->name);
sb->s_flags = flags;
/* new mountpoint for an already mounted superblock */
already_mounted:
- DEBUG(1, "MTDSB: Device %d (\"%s\") is already mounted\n",
+ pr_debug("MTDSB: Device %d (\"%s\") is already mounted\n",
mtd->index, mtd->name);
put_mtd_device(mtd);
return dget(sb->s_root);
mtd = get_mtd_device(NULL, mtdnr);
if (IS_ERR(mtd)) {
- DEBUG(0, "MTDSB: Device #%u doesn't appear to exist\n", mtdnr);
+ pr_debug("MTDSB: Device #%u doesn't appear to exist\n", mtdnr);
return ERR_CAST(mtd);
}
if (!dev_name)
return ERR_PTR(-EINVAL);
- DEBUG(2, "MTDSB: dev_name \"%s\"\n", dev_name);
+ pr_debug("MTDSB: dev_name \"%s\"\n", dev_name);
/* the preferred way of mounting in future; especially when
* CONFIG_BLOCK=n - we specify the underlying MTD device by number or
struct mtd_info *mtd;
/* mount by MTD device name */
- DEBUG(1, "MTDSB: mtd:%%s, name \"%s\"\n",
+ pr_debug("MTDSB: mtd:%%s, name \"%s\"\n",
dev_name + 4);
mtd = get_mtd_device_nm(dev_name + 4);
mtdnr = simple_strtoul(dev_name + 3, &endptr, 0);
if (!*endptr) {
/* It was a valid number */
- DEBUG(1, "MTDSB: mtd%%d, mtdnr %d\n",
+ pr_debug("MTDSB: mtd%%d, mtdnr %d\n",
mtdnr);
return mount_mtd_nr(fs_type, flags,
dev_name, data,
bdev = lookup_bdev(dev_name);
if (IS_ERR(bdev)) {
ret = PTR_ERR(bdev);
- DEBUG(1, "MTDSB: lookup_bdev() returned %d\n", ret);
+ pr_debug("MTDSB: lookup_bdev() returned %d\n", ret);
return ERR_PTR(ret);
}
- DEBUG(1, "MTDSB: lookup_bdev() returned 0\n");
+ pr_debug("MTDSB: lookup_bdev() returned 0\n");
ret = -EINVAL;
unsigned int flags;
unsigned int active_count;
unsigned int erase_count;
- unsigned int pad; /* speeds up pointer decremtnt */
+ unsigned int pad; /* speeds up pointer decrement */
};
#define MTDSWAP_ECNT_MIN(rbroot) (rb_entry(rb_first(rbroot), struct swap_eb, \
{
int ret = d->mtd->read_oob(d->mtd, from, ops);
- if (ret == -EUCLEAN)
+ if (mtd_is_bitflip(ret))
return ret;
if (ret) {
ops.oobbuf = d->oob_buf;
ops.ooboffs = 0;
ops.datbuf = NULL;
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ret = mtdswap_read_oob(d, offset, &ops);
- if (ret && ret != -EUCLEAN)
+ if (ret && !mtd_is_bitflip(ret))
return ret;
data = (struct mtdswap_oobdata *)d->oob_buf;
if (le16_to_cpu(data->magic) == MTDSWAP_MAGIC_CLEAN) {
eb->erase_count = le32_to_cpu(data->count);
- if (ret == -EUCLEAN)
+ if (mtd_is_bitflip(ret))
ret = MTDSWAP_SCANNED_BITFLIP;
else {
if (le16_to_cpu(data2->magic) == MTDSWAP_MAGIC_DIRTY)
ops.ooboffs = 0;
ops.oobbuf = (uint8_t *)&n;
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.datbuf = NULL;
if (marker == MTDSWAP_TYPE_CLEAN) {
if (ret) {
dev_warn(d->dev, "Write OOB failed for block at %08llx "
"error %d\n", offset, ret);
- if (ret == -EIO || ret == -EBADMSG)
+ if (ret == -EIO || mtd_is_eccerr(ret))
mtdswap_handle_write_error(d, eb);
return ret;
}
TREE_COUNT(d, CLEAN)--;
ret = mtdswap_write_marker(d, eb, MTDSWAP_TYPE_DIRTY);
- } while (ret == -EIO || ret == -EBADMSG);
+ } while (ret == -EIO || mtd_is_eccerr(ret));
if (ret)
return ret;
ret = mtdswap_map_free_block(d, page, bp);
eb = d->eb_data + (*bp / d->pages_per_eblk);
- if (ret == -EIO || ret == -EBADMSG) {
+ if (ret == -EIO || mtd_is_eccerr(ret)) {
d->curr_write = NULL;
eb->active_count--;
d->revmap[*bp] = PAGE_UNDEF;
writepos = (loff_t)*bp << PAGE_SHIFT;
ret = mtd->write(mtd, writepos, PAGE_SIZE, &retlen, buf);
- if (ret == -EIO || ret == -EBADMSG) {
+ if (ret == -EIO || mtd_is_eccerr(ret)) {
d->curr_write_pos--;
eb->active_count--;
d->revmap[*bp] = PAGE_UNDEF;
retry:
ret = mtd->read(mtd, readpos, PAGE_SIZE, &retlen, d->page_buf);
- if (ret < 0 && ret != -EUCLEAN) {
+ if (ret < 0 && !mtd_is_bitflip(ret)) {
oldeb = d->eb_data + oldblock / d->pages_per_eblk;
oldeb->flags |= EBLOCK_READERR;
struct mtd_oob_ops ops;
int ret;
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = mtd->writesize;
ops.ooblen = mtd->ecclayout->oobavail;
ops.ooboffs = 0;
if (ret == 0)
mtdswap_rb_add(d, eb, MTDSWAP_CLEAN);
- else if (ret != -EIO && ret != -EBADMSG)
+ else if (ret != -EIO && !mtd_is_eccerr(ret))
mtdswap_rb_add(d, eb, MTDSWAP_DIRTY);
return 0;
ret = mtd->read(mtd, readpos, PAGE_SIZE, &retlen, buf);
d->mtd_read_count++;
- if (ret == -EUCLEAN) {
+ if (mtd_is_bitflip(ret)) {
eb->flags |= EBLOCK_BITFLIP;
mtdswap_rb_add(d, eb, MTDSWAP_BITFLIP);
ret = 0;
goto revmap_fail;
eblk_bytes = sizeof(struct swap_eb)*d->eblks;
- d->eb_data = vmalloc(eblk_bytes);
+ d->eb_data = vzalloc(eblk_bytes);
if (!d->eb_data)
goto eb_data_fail;
- memset(d->eb_data, 0, eblk_bytes);
for (i = 0; i < pages; i++)
d->page_data[i] = BLOCK_UNDEF;
scratch register here to enable this feature. On Intel Moorestown
boards, the scratch register is at 0xFF108018.
-config MTD_NAND_EDB7312
- tristate "Support for Cirrus Logic EBD7312 evaluation board"
- depends on ARCH_EDB7312
- help
- This enables the driver for the Cirrus Logic EBD7312 evaluation
- board to access the onboard NAND Flash.
-
config MTD_NAND_H1900
tristate "iPAQ H1900 flash"
- depends on ARCH_PXA
+ depends on ARCH_PXA && BROKEN
help
This enables the driver for the iPAQ h1900 flash.
Support for NAND flash on Amstrad E3 (Delta).
config MTD_NAND_OMAP2
- tristate "NAND Flash device on OMAP2 and OMAP3"
- depends on ARM && (ARCH_OMAP2 || ARCH_OMAP3)
+ tristate "NAND Flash device on OMAP2, OMAP3 and OMAP4"
+ depends on ARM && (ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4)
help
- Support for NAND flash on Texas Instruments OMAP2 and OMAP3 platforms.
+ Support for NAND flash on Texas Instruments OMAP2, OMAP3 and OMAP4
+ platforms.
config MTD_NAND_IDS
tristate
The simulator may simulate various NAND flash chips for the
MTD nand layer.
+config MTD_NAND_GPMI_NAND
+ bool "GPMI NAND Flash Controller driver"
+ depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28)
+ select MTD_PARTITIONS
+ select MTD_CMDLINE_PARTS
+ help
+ Enables NAND Flash support for IMX23 or IMX28.
+ The GPMI controller is very powerful, with the help of BCH
+ module, it can do the hardware ECC. The GPMI supports several
+ NAND flashs at the same time. The GPMI may conflicts with other
+ block, such as SD card. So pay attention to it when you enable
+ the GPMI.
+
config MTD_NAND_PLATFORM
tristate "Support for generic platform NAND driver"
help
obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o
obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o
obj-$(CONFIG_MTD_NAND_DENALI) += denali.o
-obj-$(CONFIG_MTD_NAND_EDB7312) += edb7312.o
obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o
obj-$(CONFIG_MTD_NAND_BF5XX) += bf5xx_nand.o
obj-$(CONFIG_MTD_NAND_PPCHAMELEONEVB) += ppchameleonevb.o
obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mpc5121_nfc.o
obj-$(CONFIG_MTD_NAND_RICOH) += r852.o
obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
+obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
nand-objs := nand_base.o nand_bbt.o
!!host->board->rdy_pin_active_low;
}
-/*
- * Minimal-overhead PIO for data access.
- */
-static void atmel_read_buf8(struct mtd_info *mtd, u8 *buf, int len)
-{
- struct nand_chip *nand_chip = mtd->priv;
-
- __raw_readsb(nand_chip->IO_ADDR_R, buf, len);
-}
-
-static void atmel_read_buf16(struct mtd_info *mtd, u8 *buf, int len)
-{
- struct nand_chip *nand_chip = mtd->priv;
-
- __raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2);
-}
-
-static void atmel_write_buf8(struct mtd_info *mtd, const u8 *buf, int len)
-{
- struct nand_chip *nand_chip = mtd->priv;
-
- __raw_writesb(nand_chip->IO_ADDR_W, buf, len);
-}
-
-static void atmel_write_buf16(struct mtd_info *mtd, const u8 *buf, int len)
-{
- struct nand_chip *nand_chip = mtd->priv;
-
- __raw_writesw(nand_chip->IO_ADDR_W, buf, len / 2);
-}
-
static void dma_complete_func(void *completion)
{
complete(completion);
static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
{
struct nand_chip *chip = mtd->priv;
- struct atmel_nand_host *host = chip->priv;
if (use_dma && len > mtd->oobsize)
/* only use DMA for bigger than oob size: better performances */
if (atmel_nand_dma_op(mtd, buf, len, 1) == 0)
return;
- if (host->board->bus_width_16)
- atmel_read_buf16(mtd, buf, len);
- else
- atmel_read_buf8(mtd, buf, len);
+ /* if no DMA operation possible, use PIO */
+ memcpy_fromio(buf, chip->IO_ADDR_R, len);
}
static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
{
struct nand_chip *chip = mtd->priv;
- struct atmel_nand_host *host = chip->priv;
if (use_dma && len > mtd->oobsize)
/* only use DMA for bigger than oob size: better performances */
if (atmel_nand_dma_op(mtd, (void *)buf, len, 0) == 0)
return;
- if (host->board->bus_width_16)
- atmel_write_buf16(mtd, buf, len);
- else
- atmel_write_buf8(mtd, buf, len);
+ /* if no DMA operation possible, use PIO */
+ memcpy_toio(chip->IO_ADDR_W, buf, len);
}
/*
}
}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-static const char *part_probes[] = { "cmdlinepart", NULL };
-#endif
-
/*
* Probe for the NAND device.
*/
struct resource *regs;
struct resource *mem;
int res;
- struct mtd_partition *partitions = NULL;
- int num_partitions = 0;
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!mem) {
if (on_flash_bbt) {
printk(KERN_INFO "atmel_nand: Use On Flash BBT\n");
- nand_chip->options |= NAND_USE_FLASH_BBT;
+ nand_chip->bbt_options |= NAND_BBT_USE_FLASH;
}
if (!cpu_has_dma())
dma_cap_zero(mask);
dma_cap_set(DMA_MEMCPY, mask);
- host->dma_chan = dma_request_channel(mask, 0, NULL);
+ host->dma_chan = dma_request_channel(mask, NULL, NULL);
if (!host->dma_chan) {
dev_err(host->dev, "Failed to request DMA channel\n");
use_dma = 0;
goto err_scan_tail;
}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
mtd->name = "atmel_nand";
- num_partitions = parse_mtd_partitions(mtd, part_probes,
- &partitions, 0);
-#endif
- if (num_partitions <= 0 && host->board->partition_info)
- partitions = host->board->partition_info(mtd->size,
- &num_partitions);
-
- if ((!partitions) || (num_partitions == 0)) {
- printk(KERN_ERR "atmel_nand: No partitions defined, or unsupported device.\n");
- res = -ENXIO;
- goto err_no_partitions;
- }
-
- res = mtd_device_register(mtd, partitions, num_partitions);
+ res = mtd_device_parse_register(mtd, NULL, 0,
+ host->board->parts, host->board->num_parts);
if (!res)
return res;
-err_no_partitions:
- nand_release(mtd);
err_scan_tail:
err_scan_ident:
err_no_card:
* au_read_byte - read one byte from the chip
* @mtd: MTD device structure
*
- * read function for 8bit buswith
+ * read function for 8bit buswidth
*/
static u_char au_read_byte(struct mtd_info *mtd)
{
* @mtd: MTD device structure
* @byte: pointer to data byte to write
*
- * write function for 8it buswith
+ * write function for 8it buswidth
*/
static void au_write_byte(struct mtd_info *mtd, u_char byte)
{
}
/**
- * au_read_byte16 - read one byte endianess aware from the chip
+ * au_read_byte16 - read one byte endianness aware from the chip
* @mtd: MTD device structure
*
- * read function for 16bit buswith with
- * endianess conversion
+ * read function for 16bit buswidth with endianness conversion
*/
static u_char au_read_byte16(struct mtd_info *mtd)
{
}
/**
- * au_write_byte16 - write one byte endianess aware to the chip
+ * au_write_byte16 - write one byte endianness aware to the chip
* @mtd: MTD device structure
* @byte: pointer to data byte to write
*
- * write function for 16bit buswith with
- * endianess conversion
+ * write function for 16bit buswidth with endianness conversion
*/
static void au_write_byte16(struct mtd_info *mtd, u_char byte)
{
* au_read_word - read one word from the chip
* @mtd: MTD device structure
*
- * read function for 16bit buswith without
- * endianess conversion
+ * read function for 16bit buswidth without endianness conversion
*/
static u16 au_read_word(struct mtd_info *mtd)
{
* @buf: data buffer
* @len: number of bytes to write
*
- * write function for 8bit buswith
+ * write function for 8bit buswidth
*/
static void au_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
* @buf: buffer to store date
* @len: number of bytes to read
*
- * read function for 8bit buswith
+ * read function for 8bit buswidth
*/
static void au_read_buf(struct mtd_info *mtd, u_char *buf, int len)
{
* @buf: buffer containing the data to compare
* @len: number of bytes to compare
*
- * verify function for 8bit buswith
+ * verify function for 8bit buswidth
*/
static int au_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
* @buf: data buffer
* @len: number of bytes to write
*
- * write function for 16bit buswith
+ * write function for 16bit buswidth
*/
static void au_write_buf16(struct mtd_info *mtd, const u_char *buf, int len)
{
* @buf: buffer to store date
* @len: number of bytes to read
*
- * read function for 16bit buswith
+ * read function for 16bit buswidth
*/
static void au_read_buf16(struct mtd_info *mtd, u_char *buf, int len)
{
* @buf: buffer containing the data to compare
* @len: number of bytes to compare
*
- * verify function for 16bit buswith
+ * verify function for 16bit buswidth
*/
static int au_verify_buf16(struct mtd_info *mtd, const u_char *buf, int len)
{
/* Enable the following for a flash based bad block table */
/*
- this->options = NAND_USE_FLASH_BBT;
+ this->bbt_options = NAND_BBT_USE_FLASH;
*/
- this->options = NAND_USE_FLASH_BBT;
+ this->bbt_options = NAND_BBT_USE_FLASH;
/* Scan to find existence of the device */
if (nand_scan(autcpu12_mtd, 1)) {
static const __devinitconst char gBanner[] = KERN_INFO \
"BCM UMI MTD NAND Driver: 1.00\n";
-const char *part_probes[] = { "cmdlinepart", NULL };
-
#if NAND_ECC_BCH
static uint8_t scan_ff_pattern[] = { 0xff };
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!r)
- return -ENXIO;
+ if (!r) {
+ err = -ENXIO;
+ goto out_free;
+ }
/* map physical address */
bcm_umi_io_base = ioremap(r->start, resource_size(r));
if (!bcm_umi_io_base) {
printk(KERN_ERR "ioremap to access BCM UMI NAND chip failed\n");
- kfree(board_mtd);
- return -EIO;
+ err = -EIO;
+ goto out_free;
}
/* Get pointer to private data */
/* Initialize the NAND hardware. */
if (bcm_umi_nand_inithw() < 0) {
printk(KERN_ERR "BCM UMI NAND chip could not be initialized\n");
- iounmap(bcm_umi_io_base);
- kfree(board_mtd);
- return -EIO;
+ err = -EIO;
+ goto out_unmap;
}
/* Set address of NAND IO lines */
#if USE_DMA
err = nand_dma_init();
if (err != 0)
- return err;
+ goto out_unmap;
#endif
/* Figure out the size of the device that we have.
err = nand_scan_ident(board_mtd, 1, NULL);
if (err) {
printk(KERN_ERR "nand_scan failed: %d\n", err);
- iounmap(bcm_umi_io_base);
- kfree(board_mtd);
- return err;
+ goto out_unmap;
}
/* Now that we know the nand size, we can setup the ECC layout */
{
printk(KERN_ERR "NAND - Unrecognized pagesize: %d\n",
board_mtd->writesize);
- return -EINVAL;
+ err = -EINVAL;
+ goto out_unmap;
}
}
#if NAND_ECC_BCH
if (board_mtd->writesize > 512) {
- if (this->options & NAND_USE_FLASH_BBT)
+ if (this->bbt_options & NAND_BBT_USE_FLASH)
largepage_bbt.options = NAND_BBT_SCAN2NDPAGE;
this->badblock_pattern = &largepage_bbt;
}
err = nand_scan_tail(board_mtd);
if (err) {
printk(KERN_ERR "nand_scan failed: %d\n", err);
- iounmap(bcm_umi_io_base);
- kfree(board_mtd);
- return err;
+ goto out_unmap;
}
/* Register the partitions */
- {
- int nr_partitions;
- struct mtd_partition *partition_info;
-
- board_mtd->name = "bcm_umi-nand";
- nr_partitions =
- parse_mtd_partitions(board_mtd, part_probes,
- &partition_info, 0);
-
- if (nr_partitions <= 0) {
- printk(KERN_ERR "BCM UMI NAND: Too few partitions - %d\n",
- nr_partitions);
- iounmap(bcm_umi_io_base);
- kfree(board_mtd);
- return -EIO;
- }
- mtd_device_register(board_mtd, partition_info, nr_partitions);
- }
+ board_mtd->name = "bcm_umi-nand";
+ mtd_device_parse_register(board_mtd, NULL, 0, NULL, 0);
/* Return happy */
return 0;
+out_unmap:
+ iounmap(bcm_umi_io_base);
+out_free:
+ kfree(board_mtd);
+ return err;
}
static int bcm_umi_nand_remove(struct platform_device *pdev)
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <asm/io.h>
#define CAFE_NAND_CTRL1 0x00
struct cafe_priv {
struct nand_chip nand;
- struct mtd_partition *parts;
struct pci_dev *pdev;
void __iomem *mmio;
struct rs_control *rs;
return 1;
}
/**
- * cafe_nand_read_page_syndrome - {REPLACABLE] hardware ecc syndrom based page read
+ * cafe_nand_read_page_syndrome - [REPLACEABLE] hardware ecc syndrome based page read
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
struct cafe_priv *cafe;
uint32_t ctrl;
int err = 0;
- struct mtd_partition *parts;
- int nr_parts;
/* Very old versions shared the same PCI ident for all three
functions on the chip. Verify the class too... */
cafe->nand.chip_delay = 0;
/* Enable the following for a flash based bad block table */
- cafe->nand.options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR | NAND_OWN_BUFFERS;
+ cafe->nand.bbt_options = NAND_BBT_USE_FLASH;
+ cafe->nand.options = NAND_NO_AUTOINCR | NAND_OWN_BUFFERS;
if (skipbbt) {
cafe->nand.options |= NAND_SKIP_BBTSCAN;
pci_set_drvdata(pdev, mtd);
- /* We register the whole device first, separate from the partitions */
- mtd_device_register(mtd, NULL, 0);
-
-#ifdef CONFIG_MTD_CMDLINE_PARTS
mtd->name = "cafe_nand";
-#endif
- nr_parts = parse_mtd_partitions(mtd, part_probes, &parts, 0);
- if (nr_parts > 0) {
- cafe->parts = parts;
- dev_info(&cafe->pdev->dev, "%d partitions found\n", nr_parts);
- mtd_device_register(mtd, parts, nr_parts);
- }
+ mtd_device_parse_register(mtd, part_probes, 0, NULL, 0);
+
goto out;
out_irq:
#include <linux/mtd/partitions.h>
#include <linux/slab.h>
#include <linux/gpio.h>
+#include <linux/module.h>
#include <asm/io.h>
#include <asm/irq.h>
};
#define NUM_PARTITIONS (ARRAY_SIZE(partition_info))
-const char *part_probes[] = { "cmdlinepart", NULL };
-
static u_char cmx270_read_byte(struct mtd_info *mtd)
{
struct nand_chip *this = mtd->priv;
static int __init cmx270_init(void)
{
struct nand_chip *this;
- const char *part_type;
- struct mtd_partition *mtd_parts;
- int mtd_parts_nb = 0;
int ret;
if (!(machine_is_armcore() && cpu_is_pxa27x()))
goto err_scan;
}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
- mtd_parts_nb = parse_mtd_partitions(cmx270_nand_mtd, part_probes,
- &mtd_parts, 0);
- if (mtd_parts_nb > 0)
- part_type = "command line";
- else
- mtd_parts_nb = 0;
-#endif
- if (!mtd_parts_nb) {
- mtd_parts = partition_info;
- mtd_parts_nb = NUM_PARTITIONS;
- part_type = "static";
- }
-
/* Register the partitions */
- pr_notice("Using %s partition definition\n", part_type);
- ret = mtd_device_register(cmx270_nand_mtd, mtd_parts, mtd_parts_nb);
+ ret = mtd_device_parse_register(cmx270_nand_mtd, NULL, 0,
+ partition_info, NUM_PARTITIONS);
if (ret)
goto err_scan;
this->ecc.correct = nand_correct_data;
/* Enable the following for a flash based bad block table */
- this->options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR;
+ this->bbt_options = NAND_BBT_USE_FLASH;
+ this->options = NAND_NO_AUTOINCR;
/* Scan to find existence of the device */
if (nand_scan(new_mtd, 1)) {
return 0;
}
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
static int __init cs553x_init(void)
{
int err = -ENXIO;
int i;
uint64_t val;
- int mtd_parts_nb = 0;
- struct mtd_partition *mtd_parts = NULL;
/* If the CPU isn't a Geode GX or LX, abort */
if (!is_geode())
do mtdconcat etc. if we want to. */
for (i = 0; i < NR_CS553X_CONTROLLERS; i++) {
if (cs553x_mtd[i]) {
-
/* If any devices registered, return success. Else the last error. */
- mtd_parts_nb = parse_mtd_partitions(cs553x_mtd[i], part_probes, &mtd_parts, 0);
- if (mtd_parts_nb > 0)
- printk(KERN_NOTICE "Using command line partition definition\n");
- mtd_device_register(cs553x_mtd[i], mtd_parts,
- mtd_parts_nb);
+ mtd_device_parse_register(cs553x_mtd[i], NULL, 0,
+ NULL, 0);
err = 0;
}
}
struct device *dev;
struct clk *clk;
- bool partitioned;
bool is_readmode;
int ret;
uint32_t val;
nand_ecc_modes_t ecc_mode;
- struct mtd_partition *mtd_parts = NULL;
- int mtd_parts_nb = 0;
/* insist on board-specific configuration */
if (!pdata)
info->chip.chip_delay = 0;
info->chip.select_chip = nand_davinci_select_chip;
- /* options such as NAND_USE_FLASH_BBT or 16-bit widths */
+ /* options such as NAND_BBT_USE_FLASH */
+ info->chip.bbt_options = pdata->bbt_options;
+ /* options such as 16-bit widths */
info->chip.options = pdata->options;
info->chip.bbt_td = pdata->bbt_td;
info->chip.bbt_md = pdata->bbt_md;
if (ret < 0)
goto err_scan;
- if (mtd_has_cmdlinepart()) {
- static const char *probes[] __initconst = {
- "cmdlinepart", NULL
- };
-
- mtd_parts_nb = parse_mtd_partitions(&info->mtd, probes,
- &mtd_parts, 0);
- }
-
- if (mtd_parts_nb <= 0) {
- mtd_parts = pdata->parts;
- mtd_parts_nb = pdata->nr_parts;
- }
-
- /* Register any partitions */
- if (mtd_parts_nb > 0) {
- ret = mtd_device_register(&info->mtd, mtd_parts,
- mtd_parts_nb);
- if (ret == 0)
- info->partitioned = true;
- }
-
- /* If there's no partition info, just package the whole chip
- * as a single MTD device.
- */
- if (!info->partitioned)
- ret = mtd_device_register(&info->mtd, NULL, 0) ? -ENODEV : 0;
+ ret = mtd_device_parse_register(&info->mtd, NULL, 0,
+ pdata->parts, pdata->nr_parts);
if (ret < 0)
goto err_scan;
static int __exit nand_davinci_remove(struct platform_device *pdev)
{
struct davinci_nand_info *info = platform_get_drvdata(pdev);
- int status;
-
- status = mtd_device_unregister(&info->mtd);
spin_lock_irq(&davinci_nand_lock);
if (info->chip.ecc.mode == NAND_ECC_HW_SYNDROME)
* */
denali->bbtskipbytes = ioread32(denali->flash_reg +
SPARE_AREA_SKIP_BYTES);
+ detect_max_banks(denali);
denali_nand_reset(denali);
iowrite32(0x0F, denali->flash_reg + RB_PIN_ENABLED);
iowrite32(CHIP_EN_DONT_CARE__FLAG,
/* Should set value for these registers when init */
iowrite32(0, denali->flash_reg + TWO_ROW_ADDR_CYCLES);
iowrite32(1, denali->flash_reg + ECC_ENABLE);
- detect_max_banks(denali);
denali_nand_timing_set(denali);
denali_irq_init(denali);
}
denali->nand.bbt_md = &bbt_mirror_descr;
/* skip the scan for now until we have OOB read and write support */
- denali->nand.options |= NAND_USE_FLASH_BBT | NAND_SKIP_BBTSCAN;
+ denali->nand.bbt_options |= NAND_BBT_USE_FLASH;
+ denali->nand.options |= NAND_SKIP_BBTSCAN;
denali->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
/* Denali Controller only support 15bit and 8bit ECC in MRST,
struct denali_nand_info *denali = pci_get_drvdata(dev);
nand_release(&denali->mtd);
- mtd_device_unregister(&denali->mtd);
denali_irq_cleanup(dev->irq, denali);
#include <linux/mtd/doc2000.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/inftl.h>
+#include <linux/module.h>
/* Where to look for the devices? */
#ifndef CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS
/*
* The HW decoder in the DoC ASIC's provides us a error syndrome,
- * which we must convert to a standard syndrom usable by the generic
+ * which we must convert to a standard syndrome usable by the generic
* Reed-Solomon library code.
*
* Fabrice Bellard figured this out in the old docecc code. I added
ds[3] = ((ecc[3] & 0xc0) >> 6) | ((ecc[0] & 0xff) << 2);
parity = ecc[1];
- /* Initialize the syndrom buffer */
+ /* Initialize the syndrome buffer */
for (i = 0; i < NROOTS; i++)
s[i] = ds[0];
/*
WriteDOC(DOC_ECC_DIS, docptr, Mplus_ECCConf);
else
WriteDOC(DOC_ECC_DIS, docptr, ECCConf);
- if (no_ecc_failures && (ret == -EBADMSG)) {
+ if (no_ecc_failures && mtd_is_eccerr(ret)) {
printk(KERN_ERR "suppressing ECC failure\n");
ret = 0;
}
nand->ecc.mode = NAND_ECC_HW_SYNDROME;
nand->ecc.size = 512;
nand->ecc.bytes = 6;
- nand->options = NAND_USE_FLASH_BBT;
+ nand->bbt_options = NAND_BBT_USE_FLASH;
doc->physadr = physadr;
doc->virtadr = virtadr;
+++ /dev/null
-/*
- * drivers/mtd/nand/edb7312.c
- *
- * Copyright (C) 2002 Marius Gröger (mag@sysgo.de)
- *
- * Derived from drivers/mtd/nand/autcpu12.c
- * Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Overview:
- * This is a device driver for the NAND flash device found on the
- * CLEP7312 board which utilizes the Toshiba TC58V64AFT part. This is
- * a 64Mibit (8MiB x 8 bits) NAND flash device.
- */
-
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <asm/io.h>
-#include <mach/hardware.h> /* for CLPS7111_VIRT_BASE */
-#include <asm/sizes.h>
-#include <asm/hardware/clps7111.h>
-
-/*
- * MTD structure for EDB7312 board
- */
-static struct mtd_info *ep7312_mtd = NULL;
-
-/*
- * Values specific to the EDB7312 board (used with EP7312 processor)
- */
-#define EP7312_FIO_PBASE 0x10000000 /* Phys address of flash */
-#define EP7312_PXDR 0x0001 /*
- * IO offset to Port B data register
- * where the CLE, ALE and NCE pins
- * are wired to.
- */
-#define EP7312_PXDDR 0x0041 /*
- * IO offset to Port B data direction
- * register so we can control the IO
- * lines.
- */
-
-/*
- * Module stuff
- */
-
-static unsigned long ep7312_fio_pbase = EP7312_FIO_PBASE;
-static void __iomem *ep7312_pxdr = (void __iomem *)EP7312_PXDR;
-static void __iomem *ep7312_pxddr = (void __iomem *)EP7312_PXDDR;
-
-/*
- * Define static partitions for flash device
- */
-static struct mtd_partition partition_info[] = {
- {.name = "EP7312 Nand Flash",
- .offset = 0,
- .size = 8 * 1024 * 1024}
-};
-
-#define NUM_PARTITIONS 1
-
-/*
- * hardware specific access to control-lines
- *
- * NAND_NCE: bit 0 -> bit 6 (bit 7 = 1)
- * NAND_CLE: bit 1 -> bit 4
- * NAND_ALE: bit 2 -> bit 5
- */
-static void ep7312_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
- struct nand_chip *chip = mtd->priv;
-
- if (ctrl & NAND_CTRL_CHANGE) {
- unsigned char bits = 0x80;
-
- bits |= (ctrl & (NAND_CLE | NAND_ALE)) << 3;
- bits |= (ctrl & NAND_NCE) ? 0x00 : 0x40;
-
- clps_writeb((clps_readb(ep7312_pxdr) & 0xF0) | bits,
- ep7312_pxdr);
- }
- if (cmd != NAND_CMD_NONE)
- writeb(cmd, chip->IO_ADDR_W);
-}
-
-/*
- * read device ready pin
- */
-static int ep7312_device_ready(struct mtd_info *mtd)
-{
- return 1;
-}
-
-const char *part_probes[] = { "cmdlinepart", NULL };
-
-/*
- * Main initialization routine
- */
-static int __init ep7312_init(void)
-{
- struct nand_chip *this;
- const char *part_type = 0;
- int mtd_parts_nb = 0;
- struct mtd_partition *mtd_parts = 0;
- void __iomem *ep7312_fio_base;
-
- /* Allocate memory for MTD device structure and private data */
- ep7312_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
- if (!ep7312_mtd) {
- printk("Unable to allocate EDB7312 NAND MTD device structure.\n");
- return -ENOMEM;
- }
-
- /* map physical address */
- ep7312_fio_base = ioremap(ep7312_fio_pbase, SZ_1K);
- if (!ep7312_fio_base) {
- printk("ioremap EDB7312 NAND flash failed\n");
- kfree(ep7312_mtd);
- return -EIO;
- }
-
- /* Get pointer to private data */
- this = (struct nand_chip *)(&ep7312_mtd[1]);
-
- /* Initialize structures */
- memset(ep7312_mtd, 0, sizeof(struct mtd_info));
- memset(this, 0, sizeof(struct nand_chip));
-
- /* Link the private data with the MTD structure */
- ep7312_mtd->priv = this;
- ep7312_mtd->owner = THIS_MODULE;
-
- /*
- * Set GPIO Port B control register so that the pins are configured
- * to be outputs for controlling the NAND flash.
- */
- clps_writeb(0xf0, ep7312_pxddr);
-
- /* insert callbacks */
- this->IO_ADDR_R = ep7312_fio_base;
- this->IO_ADDR_W = ep7312_fio_base;
- this->cmd_ctrl = ep7312_hwcontrol;
- this->dev_ready = ep7312_device_ready;
- /* 15 us command delay time */
- this->chip_delay = 15;
-
- /* Scan to find existence of the device */
- if (nand_scan(ep7312_mtd, 1)) {
- iounmap((void *)ep7312_fio_base);
- kfree(ep7312_mtd);
- return -ENXIO;
- }
- ep7312_mtd->name = "edb7312-nand";
- mtd_parts_nb = parse_mtd_partitions(ep7312_mtd, part_probes, &mtd_parts, 0);
- if (mtd_parts_nb > 0)
- part_type = "command line";
- else
- mtd_parts_nb = 0;
- if (mtd_parts_nb == 0) {
- mtd_parts = partition_info;
- mtd_parts_nb = NUM_PARTITIONS;
- part_type = "static";
- }
-
- /* Register the partitions */
- printk(KERN_NOTICE "Using %s partition definition\n", part_type);
- mtd_device_register(ep7312_mtd, mtd_parts, mtd_parts_nb);
-
- /* Return happy */
- return 0;
-}
-
-module_init(ep7312_init);
-
-/*
- * Clean up routine
- */
-static void __exit ep7312_cleanup(void)
-{
- struct nand_chip *this = (struct nand_chip *)&ep7312_mtd[1];
-
- /* Release resources, unregister device */
- nand_release(ap7312_mtd);
-
- /* Release io resource */
- iounmap(this->IO_ADDR_R);
-
- /* Free the MTD device structure */
- kfree(ep7312_mtd);
-}
-
-module_exit(ep7312_cleanup);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Marius Groeger <mag@sysgo.de>");
-MODULE_DESCRIPTION("MTD map driver for Cogent EDB7312 board");
unsigned int use_mdr; /* Non zero if the MDR is to be set */
unsigned int oob; /* Non zero if operating on OOB data */
unsigned int counter; /* counter for the initializations */
- char *oob_poi; /* Place to write ECC after read back */
};
/* These map to the positions used by the FCM hardware ECC generator */
return -EIO;
}
+ if (chip->ecc.mode != NAND_ECC_HW)
+ return 0;
+
+ if (elbc_fcm_ctrl->read_bytes == mtd->writesize + mtd->oobsize) {
+ uint32_t lteccr = in_be32(&lbc->lteccr);
+ /*
+ * if command was a full page read and the ELBC
+ * has the LTECCR register, then bits 12-15 (ppc order) of
+ * LTECCR indicates which 512 byte sub-pages had fixed errors.
+ * bits 28-31 are uncorrectable errors, marked elsewhere.
+ * for small page nand only 1 bit is used.
+ * if the ELBC doesn't have the lteccr register it reads 0
+ */
+ if (lteccr & 0x000F000F)
+ out_be32(&lbc->lteccr, 0x000F000F); /* clear lteccr */
+ if (lteccr & 0x000F0000)
+ mtd->ecc_stats.corrected++;
+ }
+
return 0;
}
/* PAGEPROG reuses all of the setup from SEQIN and adds the length */
case NAND_CMD_PAGEPROG: {
- int full_page;
dev_vdbg(priv->dev,
"fsl_elbc_cmdfunc: NAND_CMD_PAGEPROG "
"writing %d bytes.\n", elbc_fcm_ctrl->index);
* write so the HW generates the ECC.
*/
if (elbc_fcm_ctrl->oob || elbc_fcm_ctrl->column != 0 ||
- elbc_fcm_ctrl->index != mtd->writesize + mtd->oobsize) {
+ elbc_fcm_ctrl->index != mtd->writesize + mtd->oobsize)
out_be32(&lbc->fbcr, elbc_fcm_ctrl->index);
- full_page = 0;
- } else {
+ else
out_be32(&lbc->fbcr, 0);
- full_page = 1;
- }
fsl_elbc_run_command(mtd);
-
- /* Read back the page in order to fill in the ECC for the
- * caller. Is this really needed?
- */
- if (full_page && elbc_fcm_ctrl->oob_poi) {
- out_be32(&lbc->fbcr, 3);
- set_addr(mtd, 6, page_addr, 1);
-
- elbc_fcm_ctrl->read_bytes = mtd->writesize + 9;
-
- fsl_elbc_do_read(chip, 1);
- fsl_elbc_run_command(mtd);
-
- memcpy_fromio(elbc_fcm_ctrl->oob_poi + 6,
- &elbc_fcm_ctrl->addr[elbc_fcm_ctrl->index], 3);
- elbc_fcm_ctrl->index += 3;
- }
-
- elbc_fcm_ctrl->oob_poi = NULL;
return;
}
struct nand_chip *chip,
const uint8_t *buf)
{
- struct fsl_elbc_mtd *priv = chip->priv;
- struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand;
-
fsl_elbc_write_buf(mtd, buf, mtd->writesize);
fsl_elbc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
-
- elbc_fcm_ctrl->oob_poi = chip->oob_poi;
}
static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
chip->bbt_md = &bbt_mirror_descr;
/* set up nand options */
- chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR |
- NAND_USE_FLASH_BBT;
+ chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR;
+ chip->bbt_options = NAND_BBT_USE_FLASH;
chip->controller = &elbc_fcm_ctrl->controller;
chip->priv = priv;
elbc_fcm_ctrl->chips[priv->bank] = NULL;
kfree(priv);
- kfree(elbc_fcm_ctrl);
return 0;
}
struct resource res;
struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl;
static const char *part_probe_types[]
- = { "cmdlinepart", "RedBoot", NULL };
- struct mtd_partition *parts;
+ = { "cmdlinepart", "RedBoot", "ofpart", NULL };
int ret;
int bank;
struct device *dev;
struct device_node *node = pdev->dev.of_node;
+ struct mtd_part_parser_data ppdata;
+ ppdata.of_node = pdev->dev.of_node;
if (!fsl_lbc_ctrl_dev || !fsl_lbc_ctrl_dev->regs)
return -ENODEV;
lbc = fsl_lbc_ctrl_dev->regs;
/* First look for RedBoot table or partitions on the command
* line, these take precedence over device tree information */
- ret = parse_mtd_partitions(&priv->mtd, part_probe_types, &parts, 0);
- if (ret < 0)
- goto err;
-
- if (ret == 0) {
- ret = of_mtd_parse_partitions(priv->dev, node, &parts);
- if (ret < 0)
- goto err;
- }
-
- mtd_device_register(&priv->mtd, parts, ret);
+ mtd_device_parse_register(&priv->mtd, part_probe_types, &ppdata,
+ NULL, 0);
printk(KERN_INFO "eLBC NAND device at 0x%llx, bank %d\n",
(unsigned long long)res.start, priv->bank);
{
int ret;
struct device_node *flash_np;
- static const char *part_types[] = { "cmdlinepart", NULL, };
+ struct mtd_part_parser_data ppdata;
fun->chip.IO_ADDR_R = fun->io_base;
fun->chip.IO_ADDR_W = fun->io_base;
if (ret)
goto err;
- ret = parse_mtd_partitions(&fun->mtd, part_types, &fun->parts, 0);
-
-#ifdef CONFIG_MTD_OF_PARTS
- if (ret == 0) {
- ret = of_mtd_parse_partitions(fun->dev, flash_np, &fun->parts);
- if (ret < 0)
- goto err;
- }
-#endif
- ret = mtd_device_register(&fun->mtd, fun->parts, ret);
+ ppdata.of_node = flash_np;
+ ret = mtd_device_parse_register(&fun->mtd, NULL, &ppdata, NULL, 0);
err:
of_node_put(flash_np);
+ if (ret)
+ kfree(fun->mtd.name);
return ret;
}
{
.name = "Root File System",
.offset = 0x460000,
- .size = 0,
+ .size = MTDPART_SIZ_FULL,
},
};
{
.name = "Root File System",
.offset = 0x800000,
- .size = 0,
+ .size = MTDPART_SIZ_FULL,
},
};
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-const char *part_probes[] = { "cmdlinepart", NULL };
-#endif
/**
* struct fsmc_nand_data - structure for FSMC NAND device state
* @pid: Part ID on the AMBA PrimeCell format
* @mtd: MTD info for a NAND flash.
* @nand: Chip related info for a NAND flash.
- * @partitions: Partition info for a NAND Flash.
- * @nr_partitions: Total number of partition of a NAND flash.
*
* @ecc_place: ECC placing locations in oobfree type format.
* @bank: Bank number for probed device.
u32 pid;
struct mtd_info mtd;
struct nand_chip nand;
- struct mtd_partition *partitions;
- unsigned int nr_partitions;
struct fsmc_eccplace *ecc_place;
unsigned int bank;
* platform data,
* default partition information present in driver.
*/
-#ifdef CONFIG_MTD_CMDLINE_PARTS
/*
- * Check if partition info passed via command line
+ * Check for partition info passed
*/
host->mtd.name = "nand";
- host->nr_partitions = parse_mtd_partitions(&host->mtd, part_probes,
- &host->partitions, 0);
- if (host->nr_partitions <= 0) {
-#endif
- /*
- * Check if partition info passed via command line
- */
- if (pdata->partitions) {
- host->partitions = pdata->partitions;
- host->nr_partitions = pdata->nr_partitions;
- } else {
- struct mtd_partition *partition;
- int i;
-
- /* Select the default partitions info */
- switch (host->mtd.size) {
- case 0x01000000:
- case 0x02000000:
- case 0x04000000:
- host->partitions = partition_info_16KB_blk;
- host->nr_partitions =
- sizeof(partition_info_16KB_blk) /
- sizeof(struct mtd_partition);
- break;
- case 0x08000000:
- case 0x10000000:
- case 0x20000000:
- case 0x40000000:
- host->partitions = partition_info_128KB_blk;
- host->nr_partitions =
- sizeof(partition_info_128KB_blk) /
- sizeof(struct mtd_partition);
- break;
- default:
- ret = -ENXIO;
- pr_err("Unsupported NAND size\n");
- goto err_probe;
- }
-
- partition = host->partitions;
- for (i = 0; i < host->nr_partitions; i++, partition++) {
- if (partition->size == 0) {
- partition->size = host->mtd.size -
- partition->offset;
- break;
- }
- }
- }
-#ifdef CONFIG_MTD_CMDLINE_PARTS
- }
-#endif
-
- ret = mtd_device_register(&host->mtd, host->partitions,
- host->nr_partitions);
+ ret = mtd_device_parse_register(&host->mtd, NULL, 0,
+ host->mtd.size <= 0x04000000 ?
+ partition_info_16KB_blk :
+ partition_info_128KB_blk,
+ host->mtd.size <= 0x04000000 ?
+ ARRAY_SIZE(partition_info_16KB_blk) :
+ ARRAY_SIZE(partition_info_128KB_blk));
if (ret)
goto err_probe;
platform_set_drvdata(pdev, NULL);
if (host) {
- mtd_device_unregister(&host->mtd);
+ nand_release(&host->mtd);
clk_disable(host->clk);
clk_put(host->clk);
--- /dev/null
+obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi_nand.o
+gpmi_nand-objs += gpmi-nand.o
+gpmi_nand-objs += gpmi-lib.o
--- /dev/null
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ * Copyright 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef __GPMI_NAND_BCH_REGS_H
+#define __GPMI_NAND_BCH_REGS_H
+
+#define HW_BCH_CTRL 0x00000000
+#define HW_BCH_CTRL_SET 0x00000004
+#define HW_BCH_CTRL_CLR 0x00000008
+#define HW_BCH_CTRL_TOG 0x0000000c
+
+#define BM_BCH_CTRL_COMPLETE_IRQ_EN (1 << 8)
+#define BM_BCH_CTRL_COMPLETE_IRQ (1 << 0)
+
+#define HW_BCH_STATUS0 0x00000010
+#define HW_BCH_MODE 0x00000020
+#define HW_BCH_ENCODEPTR 0x00000030
+#define HW_BCH_DATAPTR 0x00000040
+#define HW_BCH_METAPTR 0x00000050
+#define HW_BCH_LAYOUTSELECT 0x00000070
+
+#define HW_BCH_FLASH0LAYOUT0 0x00000080
+
+#define BP_BCH_FLASH0LAYOUT0_NBLOCKS 24
+#define BM_BCH_FLASH0LAYOUT0_NBLOCKS (0xff << BP_BCH_FLASH0LAYOUT0_NBLOCKS)
+#define BF_BCH_FLASH0LAYOUT0_NBLOCKS(v) \
+ (((v) << BP_BCH_FLASH0LAYOUT0_NBLOCKS) & BM_BCH_FLASH0LAYOUT0_NBLOCKS)
+
+#define BP_BCH_FLASH0LAYOUT0_META_SIZE 16
+#define BM_BCH_FLASH0LAYOUT0_META_SIZE (0xff << BP_BCH_FLASH0LAYOUT0_META_SIZE)
+#define BF_BCH_FLASH0LAYOUT0_META_SIZE(v) \
+ (((v) << BP_BCH_FLASH0LAYOUT0_META_SIZE)\
+ & BM_BCH_FLASH0LAYOUT0_META_SIZE)
+
+#define BP_BCH_FLASH0LAYOUT0_ECC0 12
+#define BM_BCH_FLASH0LAYOUT0_ECC0 (0xf << BP_BCH_FLASH0LAYOUT0_ECC0)
+#define BF_BCH_FLASH0LAYOUT0_ECC0(v) \
+ (((v) << BP_BCH_FLASH0LAYOUT0_ECC0) & BM_BCH_FLASH0LAYOUT0_ECC0)
+
+#define BP_BCH_FLASH0LAYOUT0_DATA0_SIZE 0
+#define BM_BCH_FLASH0LAYOUT0_DATA0_SIZE \
+ (0xfff << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE)
+#define BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(v) \
+ (((v) << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE)\
+ & BM_BCH_FLASH0LAYOUT0_DATA0_SIZE)
+
+#define HW_BCH_FLASH0LAYOUT1 0x00000090
+
+#define BP_BCH_FLASH0LAYOUT1_PAGE_SIZE 16
+#define BM_BCH_FLASH0LAYOUT1_PAGE_SIZE \
+ (0xffff << BP_BCH_FLASH0LAYOUT1_PAGE_SIZE)
+#define BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(v) \
+ (((v) << BP_BCH_FLASH0LAYOUT1_PAGE_SIZE) \
+ & BM_BCH_FLASH0LAYOUT1_PAGE_SIZE)
+
+#define BP_BCH_FLASH0LAYOUT1_ECCN 12
+#define BM_BCH_FLASH0LAYOUT1_ECCN (0xf << BP_BCH_FLASH0LAYOUT1_ECCN)
+#define BF_BCH_FLASH0LAYOUT1_ECCN(v) \
+ (((v) << BP_BCH_FLASH0LAYOUT1_ECCN) & BM_BCH_FLASH0LAYOUT1_ECCN)
+
+#define BP_BCH_FLASH0LAYOUT1_DATAN_SIZE 0
+#define BM_BCH_FLASH0LAYOUT1_DATAN_SIZE \
+ (0xfff << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE)
+#define BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(v) \
+ (((v) << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE) \
+ & BM_BCH_FLASH0LAYOUT1_DATAN_SIZE)
+#endif
--- /dev/null
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#include <linux/mtd/gpmi-nand.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <mach/mxs.h>
+
+#include "gpmi-nand.h"
+#include "gpmi-regs.h"
+#include "bch-regs.h"
+
+struct timing_threshod timing_default_threshold = {
+ .max_data_setup_cycles = (BM_GPMI_TIMING0_DATA_SETUP >>
+ BP_GPMI_TIMING0_DATA_SETUP),
+ .internal_data_setup_in_ns = 0,
+ .max_sample_delay_factor = (BM_GPMI_CTRL1_RDN_DELAY >>
+ BP_GPMI_CTRL1_RDN_DELAY),
+ .max_dll_clock_period_in_ns = 32,
+ .max_dll_delay_in_ns = 16,
+};
+
+/*
+ * Clear the bit and poll it cleared. This is usually called with
+ * a reset address and mask being either SFTRST(bit 31) or CLKGATE
+ * (bit 30).
+ */
+static int clear_poll_bit(void __iomem *addr, u32 mask)
+{
+ int timeout = 0x400;
+
+ /* clear the bit */
+ __mxs_clrl(mask, addr);
+
+ /*
+ * SFTRST needs 3 GPMI clocks to settle, the reference manual
+ * recommends to wait 1us.
+ */
+ udelay(1);
+
+ /* poll the bit becoming clear */
+ while ((readl(addr) & mask) && --timeout)
+ /* nothing */;
+
+ return !timeout;
+}
+
+#define MODULE_CLKGATE (1 << 30)
+#define MODULE_SFTRST (1 << 31)
+/*
+ * The current mxs_reset_block() will do two things:
+ * [1] enable the module.
+ * [2] reset the module.
+ *
+ * In most of the cases, it's ok. But there is a hardware bug in the BCH block.
+ * If you try to soft reset the BCH block, it becomes unusable until
+ * the next hard reset. This case occurs in the NAND boot mode. When the board
+ * boots by NAND, the ROM of the chip will initialize the BCH blocks itself.
+ * So If the driver tries to reset the BCH again, the BCH will not work anymore.
+ * You will see a DMA timeout in this case.
+ *
+ * To avoid this bug, just add a new parameter `just_enable` for
+ * the mxs_reset_block(), and rewrite it here.
+ */
+int gpmi_reset_block(void __iomem *reset_addr, bool just_enable)
+{
+ int ret;
+ int timeout = 0x400;
+
+ /* clear and poll SFTRST */
+ ret = clear_poll_bit(reset_addr, MODULE_SFTRST);
+ if (unlikely(ret))
+ goto error;
+
+ /* clear CLKGATE */
+ __mxs_clrl(MODULE_CLKGATE, reset_addr);
+
+ if (!just_enable) {
+ /* set SFTRST to reset the block */
+ __mxs_setl(MODULE_SFTRST, reset_addr);
+ udelay(1);
+
+ /* poll CLKGATE becoming set */
+ while ((!(readl(reset_addr) & MODULE_CLKGATE)) && --timeout)
+ /* nothing */;
+ if (unlikely(!timeout))
+ goto error;
+ }
+
+ /* clear and poll SFTRST */
+ ret = clear_poll_bit(reset_addr, MODULE_SFTRST);
+ if (unlikely(ret))
+ goto error;
+
+ /* clear and poll CLKGATE */
+ ret = clear_poll_bit(reset_addr, MODULE_CLKGATE);
+ if (unlikely(ret))
+ goto error;
+
+ return 0;
+
+error:
+ pr_err("%s(%p): module reset timeout\n", __func__, reset_addr);
+ return -ETIMEDOUT;
+}
+
+int gpmi_init(struct gpmi_nand_data *this)
+{
+ struct resources *r = &this->resources;
+ int ret;
+
+ ret = clk_enable(r->clock);
+ if (ret)
+ goto err_out;
+ ret = gpmi_reset_block(r->gpmi_regs, false);
+ if (ret)
+ goto err_out;
+
+ /* Choose NAND mode. */
+ writel(BM_GPMI_CTRL1_GPMI_MODE, r->gpmi_regs + HW_GPMI_CTRL1_CLR);
+
+ /* Set the IRQ polarity. */
+ writel(BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY,
+ r->gpmi_regs + HW_GPMI_CTRL1_SET);
+
+ /* Disable Write-Protection. */
+ writel(BM_GPMI_CTRL1_DEV_RESET, r->gpmi_regs + HW_GPMI_CTRL1_SET);
+
+ /* Select BCH ECC. */
+ writel(BM_GPMI_CTRL1_BCH_MODE, r->gpmi_regs + HW_GPMI_CTRL1_SET);
+
+ clk_disable(r->clock);
+ return 0;
+err_out:
+ return ret;
+}
+
+/* This function is very useful. It is called only when the bug occur. */
+void gpmi_dump_info(struct gpmi_nand_data *this)
+{
+ struct resources *r = &this->resources;
+ struct bch_geometry *geo = &this->bch_geometry;
+ u32 reg;
+ int i;
+
+ pr_err("Show GPMI registers :\n");
+ for (i = 0; i <= HW_GPMI_DEBUG / 0x10 + 1; i++) {
+ reg = readl(r->gpmi_regs + i * 0x10);
+ pr_err("offset 0x%.3x : 0x%.8x\n", i * 0x10, reg);
+ }
+
+ /* start to print out the BCH info */
+ pr_err("BCH Geometry :\n");
+ pr_err("GF length : %u\n", geo->gf_len);
+ pr_err("ECC Strength : %u\n", geo->ecc_strength);
+ pr_err("Page Size in Bytes : %u\n", geo->page_size);
+ pr_err("Metadata Size in Bytes : %u\n", geo->metadata_size);
+ pr_err("ECC Chunk Size in Bytes: %u\n", geo->ecc_chunk_size);
+ pr_err("ECC Chunk Count : %u\n", geo->ecc_chunk_count);
+ pr_err("Payload Size in Bytes : %u\n", geo->payload_size);
+ pr_err("Auxiliary Size in Bytes: %u\n", geo->auxiliary_size);
+ pr_err("Auxiliary Status Offset: %u\n", geo->auxiliary_status_offset);
+ pr_err("Block Mark Byte Offset : %u\n", geo->block_mark_byte_offset);
+ pr_err("Block Mark Bit Offset : %u\n", geo->block_mark_bit_offset);
+}
+
+/* Configures the geometry for BCH. */
+int bch_set_geometry(struct gpmi_nand_data *this)
+{
+ struct resources *r = &this->resources;
+ struct bch_geometry *bch_geo = &this->bch_geometry;
+ unsigned int block_count;
+ unsigned int block_size;
+ unsigned int metadata_size;
+ unsigned int ecc_strength;
+ unsigned int page_size;
+ int ret;
+
+ if (common_nfc_set_geometry(this))
+ return !0;
+
+ block_count = bch_geo->ecc_chunk_count - 1;
+ block_size = bch_geo->ecc_chunk_size;
+ metadata_size = bch_geo->metadata_size;
+ ecc_strength = bch_geo->ecc_strength >> 1;
+ page_size = bch_geo->page_size;
+
+ ret = clk_enable(r->clock);
+ if (ret)
+ goto err_out;
+
+ ret = gpmi_reset_block(r->bch_regs, true);
+ if (ret)
+ goto err_out;
+
+ /* Configure layout 0. */
+ writel(BF_BCH_FLASH0LAYOUT0_NBLOCKS(block_count)
+ | BF_BCH_FLASH0LAYOUT0_META_SIZE(metadata_size)
+ | BF_BCH_FLASH0LAYOUT0_ECC0(ecc_strength)
+ | BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(block_size),
+ r->bch_regs + HW_BCH_FLASH0LAYOUT0);
+
+ writel(BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(page_size)
+ | BF_BCH_FLASH0LAYOUT1_ECCN(ecc_strength)
+ | BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(block_size),
+ r->bch_regs + HW_BCH_FLASH0LAYOUT1);
+
+ /* Set *all* chip selects to use layout 0. */
+ writel(0, r->bch_regs + HW_BCH_LAYOUTSELECT);
+
+ /* Enable interrupts. */
+ writel(BM_BCH_CTRL_COMPLETE_IRQ_EN,
+ r->bch_regs + HW_BCH_CTRL_SET);
+
+ clk_disable(r->clock);
+ return 0;
+err_out:
+ return ret;
+}
+
+/* Converts time in nanoseconds to cycles. */
+static unsigned int ns_to_cycles(unsigned int time,
+ unsigned int period, unsigned int min)
+{
+ unsigned int k;
+
+ k = (time + period - 1) / period;
+ return max(k, min);
+}
+
+/* Apply timing to current hardware conditions. */
+static int gpmi_nfc_compute_hardware_timing(struct gpmi_nand_data *this,
+ struct gpmi_nfc_hardware_timing *hw)
+{
+ struct gpmi_nand_platform_data *pdata = this->pdata;
+ struct timing_threshod *nfc = &timing_default_threshold;
+ struct nand_chip *nand = &this->nand;
+ struct nand_timing target = this->timing;
+ bool improved_timing_is_available;
+ unsigned long clock_frequency_in_hz;
+ unsigned int clock_period_in_ns;
+ bool dll_use_half_periods;
+ unsigned int dll_delay_shift;
+ unsigned int max_sample_delay_in_ns;
+ unsigned int address_setup_in_cycles;
+ unsigned int data_setup_in_ns;
+ unsigned int data_setup_in_cycles;
+ unsigned int data_hold_in_cycles;
+ int ideal_sample_delay_in_ns;
+ unsigned int sample_delay_factor;
+ int tEYE;
+ unsigned int min_prop_delay_in_ns = pdata->min_prop_delay_in_ns;
+ unsigned int max_prop_delay_in_ns = pdata->max_prop_delay_in_ns;
+
+ /*
+ * If there are multiple chips, we need to relax the timings to allow
+ * for signal distortion due to higher capacitance.
+ */
+ if (nand->numchips > 2) {
+ target.data_setup_in_ns += 10;
+ target.data_hold_in_ns += 10;
+ target.address_setup_in_ns += 10;
+ } else if (nand->numchips > 1) {
+ target.data_setup_in_ns += 5;
+ target.data_hold_in_ns += 5;
+ target.address_setup_in_ns += 5;
+ }
+
+ /* Check if improved timing information is available. */
+ improved_timing_is_available =
+ (target.tREA_in_ns >= 0) &&
+ (target.tRLOH_in_ns >= 0) &&
+ (target.tRHOH_in_ns >= 0) ;
+
+ /* Inspect the clock. */
+ clock_frequency_in_hz = nfc->clock_frequency_in_hz;
+ clock_period_in_ns = 1000000000 / clock_frequency_in_hz;
+
+ /*
+ * The NFC quantizes setup and hold parameters in terms of clock cycles.
+ * Here, we quantize the setup and hold timing parameters to the
+ * next-highest clock period to make sure we apply at least the
+ * specified times.
+ *
+ * For data setup and data hold, the hardware interprets a value of zero
+ * as the largest possible delay. This is not what's intended by a zero
+ * in the input parameter, so we impose a minimum of one cycle.
+ */
+ data_setup_in_cycles = ns_to_cycles(target.data_setup_in_ns,
+ clock_period_in_ns, 1);
+ data_hold_in_cycles = ns_to_cycles(target.data_hold_in_ns,
+ clock_period_in_ns, 1);
+ address_setup_in_cycles = ns_to_cycles(target.address_setup_in_ns,
+ clock_period_in_ns, 0);
+
+ /*
+ * The clock's period affects the sample delay in a number of ways:
+ *
+ * (1) The NFC HAL tells us the maximum clock period the sample delay
+ * DLL can tolerate. If the clock period is greater than half that
+ * maximum, we must configure the DLL to be driven by half periods.
+ *
+ * (2) We need to convert from an ideal sample delay, in ns, to a
+ * "sample delay factor," which the NFC uses. This factor depends on
+ * whether we're driving the DLL with full or half periods.
+ * Paraphrasing the reference manual:
+ *
+ * AD = SDF x 0.125 x RP
+ *
+ * where:
+ *
+ * AD is the applied delay, in ns.
+ * SDF is the sample delay factor, which is dimensionless.
+ * RP is the reference period, in ns, which is a full clock period
+ * if the DLL is being driven by full periods, or half that if
+ * the DLL is being driven by half periods.
+ *
+ * Let's re-arrange this in a way that's more useful to us:
+ *
+ * 8
+ * SDF = AD x ----
+ * RP
+ *
+ * The reference period is either the clock period or half that, so this
+ * is:
+ *
+ * 8 AD x DDF
+ * SDF = AD x ----- = --------
+ * f x P P
+ *
+ * where:
+ *
+ * f is 1 or 1/2, depending on how we're driving the DLL.
+ * P is the clock period.
+ * DDF is the DLL Delay Factor, a dimensionless value that
+ * incorporates all the constants in the conversion.
+ *
+ * DDF will be either 8 or 16, both of which are powers of two. We can
+ * reduce the cost of this conversion by using bit shifts instead of
+ * multiplication or division. Thus:
+ *
+ * AD << DDS
+ * SDF = ---------
+ * P
+ *
+ * or
+ *
+ * AD = (SDF >> DDS) x P
+ *
+ * where:
+ *
+ * DDS is the DLL Delay Shift, the logarithm to base 2 of the DDF.
+ */
+ if (clock_period_in_ns > (nfc->max_dll_clock_period_in_ns >> 1)) {
+ dll_use_half_periods = true;
+ dll_delay_shift = 3 + 1;
+ } else {
+ dll_use_half_periods = false;
+ dll_delay_shift = 3;
+ }
+
+ /*
+ * Compute the maximum sample delay the NFC allows, under current
+ * conditions. If the clock is running too slowly, no sample delay is
+ * possible.
+ */
+ if (clock_period_in_ns > nfc->max_dll_clock_period_in_ns)
+ max_sample_delay_in_ns = 0;
+ else {
+ /*
+ * Compute the delay implied by the largest sample delay factor
+ * the NFC allows.
+ */
+ max_sample_delay_in_ns =
+ (nfc->max_sample_delay_factor * clock_period_in_ns) >>
+ dll_delay_shift;
+
+ /*
+ * Check if the implied sample delay larger than the NFC
+ * actually allows.
+ */
+ if (max_sample_delay_in_ns > nfc->max_dll_delay_in_ns)
+ max_sample_delay_in_ns = nfc->max_dll_delay_in_ns;
+ }
+
+ /*
+ * Check if improved timing information is available. If not, we have to
+ * use a less-sophisticated algorithm.
+ */
+ if (!improved_timing_is_available) {
+ /*
+ * Fold the read setup time required by the NFC into the ideal
+ * sample delay.
+ */
+ ideal_sample_delay_in_ns = target.gpmi_sample_delay_in_ns +
+ nfc->internal_data_setup_in_ns;
+
+ /*
+ * The ideal sample delay may be greater than the maximum
+ * allowed by the NFC. If so, we can trade off sample delay time
+ * for more data setup time.
+ *
+ * In each iteration of the following loop, we add a cycle to
+ * the data setup time and subtract a corresponding amount from
+ * the sample delay until we've satisified the constraints or
+ * can't do any better.
+ */
+ while ((ideal_sample_delay_in_ns > max_sample_delay_in_ns) &&
+ (data_setup_in_cycles < nfc->max_data_setup_cycles)) {
+
+ data_setup_in_cycles++;
+ ideal_sample_delay_in_ns -= clock_period_in_ns;
+
+ if (ideal_sample_delay_in_ns < 0)
+ ideal_sample_delay_in_ns = 0;
+
+ }
+
+ /*
+ * Compute the sample delay factor that corresponds most closely
+ * to the ideal sample delay. If the result is too large for the
+ * NFC, use the maximum value.
+ *
+ * Notice that we use the ns_to_cycles function to compute the
+ * sample delay factor. We do this because the form of the
+ * computation is the same as that for calculating cycles.
+ */
+ sample_delay_factor =
+ ns_to_cycles(
+ ideal_sample_delay_in_ns << dll_delay_shift,
+ clock_period_in_ns, 0);
+
+ if (sample_delay_factor > nfc->max_sample_delay_factor)
+ sample_delay_factor = nfc->max_sample_delay_factor;
+
+ /* Skip to the part where we return our results. */
+ goto return_results;
+ }
+
+ /*
+ * If control arrives here, we have more detailed timing information,
+ * so we can use a better algorithm.
+ */
+
+ /*
+ * Fold the read setup time required by the NFC into the maximum
+ * propagation delay.
+ */
+ max_prop_delay_in_ns += nfc->internal_data_setup_in_ns;
+
+ /*
+ * Earlier, we computed the number of clock cycles required to satisfy
+ * the data setup time. Now, we need to know the actual nanoseconds.
+ */
+ data_setup_in_ns = clock_period_in_ns * data_setup_in_cycles;
+
+ /*
+ * Compute tEYE, the width of the data eye when reading from the NAND
+ * Flash. The eye width is fundamentally determined by the data setup
+ * time, perturbed by propagation delays and some characteristics of the
+ * NAND Flash device.
+ *
+ * start of the eye = max_prop_delay + tREA
+ * end of the eye = min_prop_delay + tRHOH + data_setup
+ */
+ tEYE = (int)min_prop_delay_in_ns + (int)target.tRHOH_in_ns +
+ (int)data_setup_in_ns;
+
+ tEYE -= (int)max_prop_delay_in_ns + (int)target.tREA_in_ns;
+
+ /*
+ * The eye must be open. If it's not, we can try to open it by
+ * increasing its main forcer, the data setup time.
+ *
+ * In each iteration of the following loop, we increase the data setup
+ * time by a single clock cycle. We do this until either the eye is
+ * open or we run into NFC limits.
+ */
+ while ((tEYE <= 0) &&
+ (data_setup_in_cycles < nfc->max_data_setup_cycles)) {
+ /* Give a cycle to data setup. */
+ data_setup_in_cycles++;
+ /* Synchronize the data setup time with the cycles. */
+ data_setup_in_ns += clock_period_in_ns;
+ /* Adjust tEYE accordingly. */
+ tEYE += clock_period_in_ns;
+ }
+
+ /*
+ * When control arrives here, the eye is open. The ideal time to sample
+ * the data is in the center of the eye:
+ *
+ * end of the eye + start of the eye
+ * --------------------------------- - data_setup
+ * 2
+ *
+ * After some algebra, this simplifies to the code immediately below.
+ */
+ ideal_sample_delay_in_ns =
+ ((int)max_prop_delay_in_ns +
+ (int)target.tREA_in_ns +
+ (int)min_prop_delay_in_ns +
+ (int)target.tRHOH_in_ns -
+ (int)data_setup_in_ns) >> 1;
+
+ /*
+ * The following figure illustrates some aspects of a NAND Flash read:
+ *
+ *
+ * __ _____________________________________
+ * RDN \_________________/
+ *
+ * <---- tEYE ----->
+ * /-----------------\
+ * Read Data ----------------------------< >---------
+ * \-----------------/
+ * ^ ^ ^ ^
+ * | | | |
+ * |<--Data Setup -->|<--Delay Time -->| |
+ * | | | |
+ * | | |
+ * | |<-- Quantized Delay Time -->|
+ * | | |
+ *
+ *
+ * We have some issues we must now address:
+ *
+ * (1) The *ideal* sample delay time must not be negative. If it is, we
+ * jam it to zero.
+ *
+ * (2) The *ideal* sample delay time must not be greater than that
+ * allowed by the NFC. If it is, we can increase the data setup
+ * time, which will reduce the delay between the end of the data
+ * setup and the center of the eye. It will also make the eye
+ * larger, which might help with the next issue...
+ *
+ * (3) The *quantized* sample delay time must not fall either before the
+ * eye opens or after it closes (the latter is the problem
+ * illustrated in the above figure).
+ */
+
+ /* Jam a negative ideal sample delay to zero. */
+ if (ideal_sample_delay_in_ns < 0)
+ ideal_sample_delay_in_ns = 0;
+
+ /*
+ * Extend the data setup as needed to reduce the ideal sample delay
+ * below the maximum permitted by the NFC.
+ */
+ while ((ideal_sample_delay_in_ns > max_sample_delay_in_ns) &&
+ (data_setup_in_cycles < nfc->max_data_setup_cycles)) {
+
+ /* Give a cycle to data setup. */
+ data_setup_in_cycles++;
+ /* Synchronize the data setup time with the cycles. */
+ data_setup_in_ns += clock_period_in_ns;
+ /* Adjust tEYE accordingly. */
+ tEYE += clock_period_in_ns;
+
+ /*
+ * Decrease the ideal sample delay by one half cycle, to keep it
+ * in the middle of the eye.
+ */
+ ideal_sample_delay_in_ns -= (clock_period_in_ns >> 1);
+
+ /* Jam a negative ideal sample delay to zero. */
+ if (ideal_sample_delay_in_ns < 0)
+ ideal_sample_delay_in_ns = 0;
+ }
+
+ /*
+ * Compute the sample delay factor that corresponds to the ideal sample
+ * delay. If the result is too large, then use the maximum allowed
+ * value.
+ *
+ * Notice that we use the ns_to_cycles function to compute the sample
+ * delay factor. We do this because the form of the computation is the
+ * same as that for calculating cycles.
+ */
+ sample_delay_factor =
+ ns_to_cycles(ideal_sample_delay_in_ns << dll_delay_shift,
+ clock_period_in_ns, 0);
+
+ if (sample_delay_factor > nfc->max_sample_delay_factor)
+ sample_delay_factor = nfc->max_sample_delay_factor;
+
+ /*
+ * These macros conveniently encapsulate a computation we'll use to
+ * continuously evaluate whether or not the data sample delay is inside
+ * the eye.
+ */
+ #define IDEAL_DELAY ((int) ideal_sample_delay_in_ns)
+
+ #define QUANTIZED_DELAY \
+ ((int) ((sample_delay_factor * clock_period_in_ns) >> \
+ dll_delay_shift))
+
+ #define DELAY_ERROR (abs(QUANTIZED_DELAY - IDEAL_DELAY))
+
+ #define SAMPLE_IS_NOT_WITHIN_THE_EYE (DELAY_ERROR > (tEYE >> 1))
+
+ /*
+ * While the quantized sample time falls outside the eye, reduce the
+ * sample delay or extend the data setup to move the sampling point back
+ * toward the eye. Do not allow the number of data setup cycles to
+ * exceed the maximum allowed by the NFC.
+ */
+ while (SAMPLE_IS_NOT_WITHIN_THE_EYE &&
+ (data_setup_in_cycles < nfc->max_data_setup_cycles)) {
+ /*
+ * If control arrives here, the quantized sample delay falls
+ * outside the eye. Check if it's before the eye opens, or after
+ * the eye closes.
+ */
+ if (QUANTIZED_DELAY > IDEAL_DELAY) {
+ /*
+ * If control arrives here, the quantized sample delay
+ * falls after the eye closes. Decrease the quantized
+ * delay time and then go back to re-evaluate.
+ */
+ if (sample_delay_factor != 0)
+ sample_delay_factor--;
+ continue;
+ }
+
+ /*
+ * If control arrives here, the quantized sample delay falls
+ * before the eye opens. Shift the sample point by increasing
+ * data setup time. This will also make the eye larger.
+ */
+
+ /* Give a cycle to data setup. */
+ data_setup_in_cycles++;
+ /* Synchronize the data setup time with the cycles. */
+ data_setup_in_ns += clock_period_in_ns;
+ /* Adjust tEYE accordingly. */
+ tEYE += clock_period_in_ns;
+
+ /*
+ * Decrease the ideal sample delay by one half cycle, to keep it
+ * in the middle of the eye.
+ */
+ ideal_sample_delay_in_ns -= (clock_period_in_ns >> 1);
+
+ /* ...and one less period for the delay time. */
+ ideal_sample_delay_in_ns -= clock_period_in_ns;
+
+ /* Jam a negative ideal sample delay to zero. */
+ if (ideal_sample_delay_in_ns < 0)
+ ideal_sample_delay_in_ns = 0;
+
+ /*
+ * We have a new ideal sample delay, so re-compute the quantized
+ * delay.
+ */
+ sample_delay_factor =
+ ns_to_cycles(
+ ideal_sample_delay_in_ns << dll_delay_shift,
+ clock_period_in_ns, 0);
+
+ if (sample_delay_factor > nfc->max_sample_delay_factor)
+ sample_delay_factor = nfc->max_sample_delay_factor;
+ }
+
+ /* Control arrives here when we're ready to return our results. */
+return_results:
+ hw->data_setup_in_cycles = data_setup_in_cycles;
+ hw->data_hold_in_cycles = data_hold_in_cycles;
+ hw->address_setup_in_cycles = address_setup_in_cycles;
+ hw->use_half_periods = dll_use_half_periods;
+ hw->sample_delay_factor = sample_delay_factor;
+
+ /* Return success. */
+ return 0;
+}
+
+/* Begin the I/O */
+void gpmi_begin(struct gpmi_nand_data *this)
+{
+ struct resources *r = &this->resources;
+ struct timing_threshod *nfc = &timing_default_threshold;
+ unsigned char *gpmi_regs = r->gpmi_regs;
+ unsigned int clock_period_in_ns;
+ uint32_t reg;
+ unsigned int dll_wait_time_in_us;
+ struct gpmi_nfc_hardware_timing hw;
+ int ret;
+
+ /* Enable the clock. */
+ ret = clk_enable(r->clock);
+ if (ret) {
+ pr_err("We failed in enable the clk\n");
+ goto err_out;
+ }
+
+ /* set ready/busy timeout */
+ writel(0x500 << BP_GPMI_TIMING1_BUSY_TIMEOUT,
+ gpmi_regs + HW_GPMI_TIMING1);
+
+ /* Get the timing information we need. */
+ nfc->clock_frequency_in_hz = clk_get_rate(r->clock);
+ clock_period_in_ns = 1000000000 / nfc->clock_frequency_in_hz;
+
+ gpmi_nfc_compute_hardware_timing(this, &hw);
+
+ /* Set up all the simple timing parameters. */
+ reg = BF_GPMI_TIMING0_ADDRESS_SETUP(hw.address_setup_in_cycles) |
+ BF_GPMI_TIMING0_DATA_HOLD(hw.data_hold_in_cycles) |
+ BF_GPMI_TIMING0_DATA_SETUP(hw.data_setup_in_cycles) ;
+
+ writel(reg, gpmi_regs + HW_GPMI_TIMING0);
+
+ /*
+ * DLL_ENABLE must be set to 0 when setting RDN_DELAY or HALF_PERIOD.
+ */
+ writel(BM_GPMI_CTRL1_DLL_ENABLE, gpmi_regs + HW_GPMI_CTRL1_CLR);
+
+ /* Clear out the DLL control fields. */
+ writel(BM_GPMI_CTRL1_RDN_DELAY, gpmi_regs + HW_GPMI_CTRL1_CLR);
+ writel(BM_GPMI_CTRL1_HALF_PERIOD, gpmi_regs + HW_GPMI_CTRL1_CLR);
+
+ /* If no sample delay is called for, return immediately. */
+ if (!hw.sample_delay_factor)
+ return;
+
+ /* Configure the HALF_PERIOD flag. */
+ if (hw.use_half_periods)
+ writel(BM_GPMI_CTRL1_HALF_PERIOD,
+ gpmi_regs + HW_GPMI_CTRL1_SET);
+
+ /* Set the delay factor. */
+ writel(BF_GPMI_CTRL1_RDN_DELAY(hw.sample_delay_factor),
+ gpmi_regs + HW_GPMI_CTRL1_SET);
+
+ /* Enable the DLL. */
+ writel(BM_GPMI_CTRL1_DLL_ENABLE, gpmi_regs + HW_GPMI_CTRL1_SET);
+
+ /*
+ * After we enable the GPMI DLL, we have to wait 64 clock cycles before
+ * we can use the GPMI.
+ *
+ * Calculate the amount of time we need to wait, in microseconds.
+ */
+ dll_wait_time_in_us = (clock_period_in_ns * 64) / 1000;
+
+ if (!dll_wait_time_in_us)
+ dll_wait_time_in_us = 1;
+
+ /* Wait for the DLL to settle. */
+ udelay(dll_wait_time_in_us);
+
+err_out:
+ return;
+}
+
+void gpmi_end(struct gpmi_nand_data *this)
+{
+ struct resources *r = &this->resources;
+ clk_disable(r->clock);
+}
+
+/* Clears a BCH interrupt. */
+void gpmi_clear_bch(struct gpmi_nand_data *this)
+{
+ struct resources *r = &this->resources;
+ writel(BM_BCH_CTRL_COMPLETE_IRQ, r->bch_regs + HW_BCH_CTRL_CLR);
+}
+
+/* Returns the Ready/Busy status of the given chip. */
+int gpmi_is_ready(struct gpmi_nand_data *this, unsigned chip)
+{
+ struct resources *r = &this->resources;
+ uint32_t mask = 0;
+ uint32_t reg = 0;
+
+ if (GPMI_IS_MX23(this)) {
+ mask = MX23_BM_GPMI_DEBUG_READY0 << chip;
+ reg = readl(r->gpmi_regs + HW_GPMI_DEBUG);
+ } else if (GPMI_IS_MX28(this)) {
+ mask = MX28_BF_GPMI_STAT_READY_BUSY(1 << chip);
+ reg = readl(r->gpmi_regs + HW_GPMI_STAT);
+ } else
+ pr_err("unknow arch.\n");
+ return reg & mask;
+}
+
+static inline void set_dma_type(struct gpmi_nand_data *this,
+ enum dma_ops_type type)
+{
+ this->last_dma_type = this->dma_type;
+ this->dma_type = type;
+}
+
+int gpmi_send_command(struct gpmi_nand_data *this)
+{
+ struct dma_chan *channel = get_dma_chan(this);
+ struct dma_async_tx_descriptor *desc;
+ struct scatterlist *sgl;
+ int chip = this->current_chip;
+ u32 pio[3];
+
+ /* [1] send out the PIO words */
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(BV_GPMI_CTRL0_COMMAND_MODE__WRITE)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_CLE)
+ | BM_GPMI_CTRL0_ADDRESS_INCREMENT
+ | BF_GPMI_CTRL0_XFER_COUNT(this->command_length);
+ pio[1] = pio[2] = 0;
+ desc = channel->device->device_prep_slave_sg(channel,
+ (struct scatterlist *)pio,
+ ARRAY_SIZE(pio), DMA_NONE, 0);
+ if (!desc) {
+ pr_err("step 1 error\n");
+ return -1;
+ }
+
+ /* [2] send out the COMMAND + ADDRESS string stored in @buffer */
+ sgl = &this->cmd_sgl;
+
+ sg_init_one(sgl, this->cmd_buffer, this->command_length);
+ dma_map_sg(this->dev, sgl, 1, DMA_TO_DEVICE);
+ desc = channel->device->device_prep_slave_sg(channel,
+ sgl, 1, DMA_TO_DEVICE, 1);
+ if (!desc) {
+ pr_err("step 2 error\n");
+ return -1;
+ }
+
+ /* [3] submit the DMA */
+ set_dma_type(this, DMA_FOR_COMMAND);
+ return start_dma_without_bch_irq(this, desc);
+}
+
+int gpmi_send_data(struct gpmi_nand_data *this)
+{
+ struct dma_async_tx_descriptor *desc;
+ struct dma_chan *channel = get_dma_chan(this);
+ int chip = this->current_chip;
+ uint32_t command_mode;
+ uint32_t address;
+ u32 pio[2];
+
+ /* [1] PIO */
+ command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WRITE;
+ address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(address)
+ | BF_GPMI_CTRL0_XFER_COUNT(this->upper_len);
+ pio[1] = 0;
+ desc = channel->device->device_prep_slave_sg(channel,
+ (struct scatterlist *)pio,
+ ARRAY_SIZE(pio), DMA_NONE, 0);
+ if (!desc) {
+ pr_err("step 1 error\n");
+ return -1;
+ }
+
+ /* [2] send DMA request */
+ prepare_data_dma(this, DMA_TO_DEVICE);
+ desc = channel->device->device_prep_slave_sg(channel, &this->data_sgl,
+ 1, DMA_TO_DEVICE, 1);
+ if (!desc) {
+ pr_err("step 2 error\n");
+ return -1;
+ }
+ /* [3] submit the DMA */
+ set_dma_type(this, DMA_FOR_WRITE_DATA);
+ return start_dma_without_bch_irq(this, desc);
+}
+
+int gpmi_read_data(struct gpmi_nand_data *this)
+{
+ struct dma_async_tx_descriptor *desc;
+ struct dma_chan *channel = get_dma_chan(this);
+ int chip = this->current_chip;
+ u32 pio[2];
+
+ /* [1] : send PIO */
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(BV_GPMI_CTRL0_COMMAND_MODE__READ)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_DATA)
+ | BF_GPMI_CTRL0_XFER_COUNT(this->upper_len);
+ pio[1] = 0;
+ desc = channel->device->device_prep_slave_sg(channel,
+ (struct scatterlist *)pio,
+ ARRAY_SIZE(pio), DMA_NONE, 0);
+ if (!desc) {
+ pr_err("step 1 error\n");
+ return -1;
+ }
+
+ /* [2] : send DMA request */
+ prepare_data_dma(this, DMA_FROM_DEVICE);
+ desc = channel->device->device_prep_slave_sg(channel, &this->data_sgl,
+ 1, DMA_FROM_DEVICE, 1);
+ if (!desc) {
+ pr_err("step 2 error\n");
+ return -1;
+ }
+
+ /* [3] : submit the DMA */
+ set_dma_type(this, DMA_FOR_READ_DATA);
+ return start_dma_without_bch_irq(this, desc);
+}
+
+int gpmi_send_page(struct gpmi_nand_data *this,
+ dma_addr_t payload, dma_addr_t auxiliary)
+{
+ struct bch_geometry *geo = &this->bch_geometry;
+ uint32_t command_mode;
+ uint32_t address;
+ uint32_t ecc_command;
+ uint32_t buffer_mask;
+ struct dma_async_tx_descriptor *desc;
+ struct dma_chan *channel = get_dma_chan(this);
+ int chip = this->current_chip;
+ u32 pio[6];
+
+ /* A DMA descriptor that does an ECC page read. */
+ command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WRITE;
+ address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+ ecc_command = BV_GPMI_ECCCTRL_ECC_CMD__BCH_ENCODE;
+ buffer_mask = BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE |
+ BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY;
+
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(address)
+ | BF_GPMI_CTRL0_XFER_COUNT(0);
+ pio[1] = 0;
+ pio[2] = BM_GPMI_ECCCTRL_ENABLE_ECC
+ | BF_GPMI_ECCCTRL_ECC_CMD(ecc_command)
+ | BF_GPMI_ECCCTRL_BUFFER_MASK(buffer_mask);
+ pio[3] = geo->page_size;
+ pio[4] = payload;
+ pio[5] = auxiliary;
+
+ desc = channel->device->device_prep_slave_sg(channel,
+ (struct scatterlist *)pio,
+ ARRAY_SIZE(pio), DMA_NONE, 0);
+ if (!desc) {
+ pr_err("step 2 error\n");
+ return -1;
+ }
+ set_dma_type(this, DMA_FOR_WRITE_ECC_PAGE);
+ return start_dma_with_bch_irq(this, desc);
+}
+
+int gpmi_read_page(struct gpmi_nand_data *this,
+ dma_addr_t payload, dma_addr_t auxiliary)
+{
+ struct bch_geometry *geo = &this->bch_geometry;
+ uint32_t command_mode;
+ uint32_t address;
+ uint32_t ecc_command;
+ uint32_t buffer_mask;
+ struct dma_async_tx_descriptor *desc;
+ struct dma_chan *channel = get_dma_chan(this);
+ int chip = this->current_chip;
+ u32 pio[6];
+
+ /* [1] Wait for the chip to report ready. */
+ command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY;
+ address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(address)
+ | BF_GPMI_CTRL0_XFER_COUNT(0);
+ pio[1] = 0;
+ desc = channel->device->device_prep_slave_sg(channel,
+ (struct scatterlist *)pio, 2, DMA_NONE, 0);
+ if (!desc) {
+ pr_err("step 1 error\n");
+ return -1;
+ }
+
+ /* [2] Enable the BCH block and read. */
+ command_mode = BV_GPMI_CTRL0_COMMAND_MODE__READ;
+ address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+ ecc_command = BV_GPMI_ECCCTRL_ECC_CMD__BCH_DECODE;
+ buffer_mask = BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE
+ | BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY;
+
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(address)
+ | BF_GPMI_CTRL0_XFER_COUNT(geo->page_size);
+
+ pio[1] = 0;
+ pio[2] = BM_GPMI_ECCCTRL_ENABLE_ECC
+ | BF_GPMI_ECCCTRL_ECC_CMD(ecc_command)
+ | BF_GPMI_ECCCTRL_BUFFER_MASK(buffer_mask);
+ pio[3] = geo->page_size;
+ pio[4] = payload;
+ pio[5] = auxiliary;
+ desc = channel->device->device_prep_slave_sg(channel,
+ (struct scatterlist *)pio,
+ ARRAY_SIZE(pio), DMA_NONE, 1);
+ if (!desc) {
+ pr_err("step 2 error\n");
+ return -1;
+ }
+
+ /* [3] Disable the BCH block */
+ command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY;
+ address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(address)
+ | BF_GPMI_CTRL0_XFER_COUNT(geo->page_size);
+ pio[1] = 0;
+ desc = channel->device->device_prep_slave_sg(channel,
+ (struct scatterlist *)pio, 2, DMA_NONE, 1);
+ if (!desc) {
+ pr_err("step 3 error\n");
+ return -1;
+ }
+
+ /* [4] submit the DMA */
+ set_dma_type(this, DMA_FOR_READ_ECC_PAGE);
+ return start_dma_with_bch_irq(this, desc);
+}
--- /dev/null
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/gpmi-nand.h>
+#include <linux/mtd/partitions.h>
+
+#include "gpmi-nand.h"
+
+/* add our owner bbt descriptor */
+static uint8_t scan_ff_pattern[] = { 0xff };
+static struct nand_bbt_descr gpmi_bbt_descr = {
+ .options = 0,
+ .offs = 0,
+ .len = 1,
+ .pattern = scan_ff_pattern
+};
+
+/* We will use all the (page + OOB). */
+static struct nand_ecclayout gpmi_hw_ecclayout = {
+ .eccbytes = 0,
+ .eccpos = { 0, },
+ .oobfree = { {.offset = 0, .length = 0} }
+};
+
+static irqreturn_t bch_irq(int irq, void *cookie)
+{
+ struct gpmi_nand_data *this = cookie;
+
+ gpmi_clear_bch(this);
+ complete(&this->bch_done);
+ return IRQ_HANDLED;
+}
+
+/*
+ * Calculate the ECC strength by hand:
+ * E : The ECC strength.
+ * G : the length of Galois Field.
+ * N : The chunk count of per page.
+ * O : the oobsize of the NAND chip.
+ * M : the metasize of per page.
+ *
+ * The formula is :
+ * E * G * N
+ * ------------ <= (O - M)
+ * 8
+ *
+ * So, we get E by:
+ * (O - M) * 8
+ * E <= -------------
+ * G * N
+ */
+static inline int get_ecc_strength(struct gpmi_nand_data *this)
+{
+ struct bch_geometry *geo = &this->bch_geometry;
+ struct mtd_info *mtd = &this->mtd;
+ int ecc_strength;
+
+ ecc_strength = ((mtd->oobsize - geo->metadata_size) * 8)
+ / (geo->gf_len * geo->ecc_chunk_count);
+
+ /* We need the minor even number. */
+ return round_down(ecc_strength, 2);
+}
+
+int common_nfc_set_geometry(struct gpmi_nand_data *this)
+{
+ struct bch_geometry *geo = &this->bch_geometry;
+ struct mtd_info *mtd = &this->mtd;
+ unsigned int metadata_size;
+ unsigned int status_size;
+ unsigned int block_mark_bit_offset;
+
+ /*
+ * The size of the metadata can be changed, though we set it to 10
+ * bytes now. But it can't be too large, because we have to save
+ * enough space for BCH.
+ */
+ geo->metadata_size = 10;
+
+ /* The default for the length of Galois Field. */
+ geo->gf_len = 13;
+
+ /* The default for chunk size. There is no oobsize greater then 512. */
+ geo->ecc_chunk_size = 512;
+ while (geo->ecc_chunk_size < mtd->oobsize)
+ geo->ecc_chunk_size *= 2; /* keep C >= O */
+
+ geo->ecc_chunk_count = mtd->writesize / geo->ecc_chunk_size;
+
+ /* We use the same ECC strength for all chunks. */
+ geo->ecc_strength = get_ecc_strength(this);
+ if (!geo->ecc_strength) {
+ pr_err("We get a wrong ECC strength.\n");
+ return -EINVAL;
+ }
+
+ geo->page_size = mtd->writesize + mtd->oobsize;
+ geo->payload_size = mtd->writesize;
+
+ /*
+ * The auxiliary buffer contains the metadata and the ECC status. The
+ * metadata is padded to the nearest 32-bit boundary. The ECC status
+ * contains one byte for every ECC chunk, and is also padded to the
+ * nearest 32-bit boundary.
+ */
+ metadata_size = ALIGN(geo->metadata_size, 4);
+ status_size = ALIGN(geo->ecc_chunk_count, 4);
+
+ geo->auxiliary_size = metadata_size + status_size;
+ geo->auxiliary_status_offset = metadata_size;
+
+ if (!this->swap_block_mark)
+ return 0;
+
+ /*
+ * We need to compute the byte and bit offsets of
+ * the physical block mark within the ECC-based view of the page.
+ *
+ * NAND chip with 2K page shows below:
+ * (Block Mark)
+ * | |
+ * | D |
+ * |<---->|
+ * V V
+ * +---+----------+-+----------+-+----------+-+----------+-+
+ * | M | data |E| data |E| data |E| data |E|
+ * +---+----------+-+----------+-+----------+-+----------+-+
+ *
+ * The position of block mark moves forward in the ECC-based view
+ * of page, and the delta is:
+ *
+ * E * G * (N - 1)
+ * D = (---------------- + M)
+ * 8
+ *
+ * With the formula to compute the ECC strength, and the condition
+ * : C >= O (C is the ecc chunk size)
+ *
+ * It's easy to deduce to the following result:
+ *
+ * E * G (O - M) C - M C - M
+ * ----------- <= ------- <= -------- < ---------
+ * 8 N N (N - 1)
+ *
+ * So, we get:
+ *
+ * E * G * (N - 1)
+ * D = (---------------- + M) < C
+ * 8
+ *
+ * The above inequality means the position of block mark
+ * within the ECC-based view of the page is still in the data chunk,
+ * and it's NOT in the ECC bits of the chunk.
+ *
+ * Use the following to compute the bit position of the
+ * physical block mark within the ECC-based view of the page:
+ * (page_size - D) * 8
+ *
+ * --Huang Shijie
+ */
+ block_mark_bit_offset = mtd->writesize * 8 -
+ (geo->ecc_strength * geo->gf_len * (geo->ecc_chunk_count - 1)
+ + geo->metadata_size * 8);
+
+ geo->block_mark_byte_offset = block_mark_bit_offset / 8;
+ geo->block_mark_bit_offset = block_mark_bit_offset % 8;
+ return 0;
+}
+
+struct dma_chan *get_dma_chan(struct gpmi_nand_data *this)
+{
+ int chipnr = this->current_chip;
+
+ return this->dma_chans[chipnr];
+}
+
+/* Can we use the upper's buffer directly for DMA? */
+void prepare_data_dma(struct gpmi_nand_data *this, enum dma_data_direction dr)
+{
+ struct scatterlist *sgl = &this->data_sgl;
+ int ret;
+
+ this->direct_dma_map_ok = true;
+
+ /* first try to map the upper buffer directly */
+ sg_init_one(sgl, this->upper_buf, this->upper_len);
+ ret = dma_map_sg(this->dev, sgl, 1, dr);
+ if (ret == 0) {
+ /* We have to use our own DMA buffer. */
+ sg_init_one(sgl, this->data_buffer_dma, PAGE_SIZE);
+
+ if (dr == DMA_TO_DEVICE)
+ memcpy(this->data_buffer_dma, this->upper_buf,
+ this->upper_len);
+
+ ret = dma_map_sg(this->dev, sgl, 1, dr);
+ if (ret == 0)
+ pr_err("map failed.\n");
+
+ this->direct_dma_map_ok = false;
+ }
+}
+
+/* This will be called after the DMA operation is finished. */
+static void dma_irq_callback(void *param)
+{
+ struct gpmi_nand_data *this = param;
+ struct completion *dma_c = &this->dma_done;
+
+ complete(dma_c);
+
+ switch (this->dma_type) {
+ case DMA_FOR_COMMAND:
+ dma_unmap_sg(this->dev, &this->cmd_sgl, 1, DMA_TO_DEVICE);
+ break;
+
+ case DMA_FOR_READ_DATA:
+ dma_unmap_sg(this->dev, &this->data_sgl, 1, DMA_FROM_DEVICE);
+ if (this->direct_dma_map_ok == false)
+ memcpy(this->upper_buf, this->data_buffer_dma,
+ this->upper_len);
+ break;
+
+ case DMA_FOR_WRITE_DATA:
+ dma_unmap_sg(this->dev, &this->data_sgl, 1, DMA_TO_DEVICE);
+ break;
+
+ case DMA_FOR_READ_ECC_PAGE:
+ case DMA_FOR_WRITE_ECC_PAGE:
+ /* We have to wait the BCH interrupt to finish. */
+ break;
+
+ default:
+ pr_err("in wrong DMA operation.\n");
+ }
+}
+
+int start_dma_without_bch_irq(struct gpmi_nand_data *this,
+ struct dma_async_tx_descriptor *desc)
+{
+ struct completion *dma_c = &this->dma_done;
+ int err;
+
+ init_completion(dma_c);
+
+ desc->callback = dma_irq_callback;
+ desc->callback_param = this;
+ dmaengine_submit(desc);
+
+ /* Wait for the interrupt from the DMA block. */
+ err = wait_for_completion_timeout(dma_c, msecs_to_jiffies(1000));
+ if (!err) {
+ pr_err("DMA timeout, last DMA :%d\n", this->last_dma_type);
+ gpmi_dump_info(this);
+ return -ETIMEDOUT;
+ }
+ return 0;
+}
+
+/*
+ * This function is used in BCH reading or BCH writing pages.
+ * It will wait for the BCH interrupt as long as ONE second.
+ * Actually, we must wait for two interrupts :
+ * [1] firstly the DMA interrupt and
+ * [2] secondly the BCH interrupt.
+ */
+int start_dma_with_bch_irq(struct gpmi_nand_data *this,
+ struct dma_async_tx_descriptor *desc)
+{
+ struct completion *bch_c = &this->bch_done;
+ int err;
+
+ /* Prepare to receive an interrupt from the BCH block. */
+ init_completion(bch_c);
+
+ /* start the DMA */
+ start_dma_without_bch_irq(this, desc);
+
+ /* Wait for the interrupt from the BCH block. */
+ err = wait_for_completion_timeout(bch_c, msecs_to_jiffies(1000));
+ if (!err) {
+ pr_err("BCH timeout, last DMA :%d\n", this->last_dma_type);
+ gpmi_dump_info(this);
+ return -ETIMEDOUT;
+ }
+ return 0;
+}
+
+static int __devinit
+acquire_register_block(struct gpmi_nand_data *this, const char *res_name)
+{
+ struct platform_device *pdev = this->pdev;
+ struct resources *res = &this->resources;
+ struct resource *r;
+ void *p;
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res_name);
+ if (!r) {
+ pr_err("Can't get resource for %s\n", res_name);
+ return -ENXIO;
+ }
+
+ p = ioremap(r->start, resource_size(r));
+ if (!p) {
+ pr_err("Can't remap %s\n", res_name);
+ return -ENOMEM;
+ }
+
+ if (!strcmp(res_name, GPMI_NAND_GPMI_REGS_ADDR_RES_NAME))
+ res->gpmi_regs = p;
+ else if (!strcmp(res_name, GPMI_NAND_BCH_REGS_ADDR_RES_NAME))
+ res->bch_regs = p;
+ else
+ pr_err("unknown resource name : %s\n", res_name);
+
+ return 0;
+}
+
+static void release_register_block(struct gpmi_nand_data *this)
+{
+ struct resources *res = &this->resources;
+ if (res->gpmi_regs)
+ iounmap(res->gpmi_regs);
+ if (res->bch_regs)
+ iounmap(res->bch_regs);
+ res->gpmi_regs = NULL;
+ res->bch_regs = NULL;
+}
+
+static int __devinit
+acquire_bch_irq(struct gpmi_nand_data *this, irq_handler_t irq_h)
+{
+ struct platform_device *pdev = this->pdev;
+ struct resources *res = &this->resources;
+ const char *res_name = GPMI_NAND_BCH_INTERRUPT_RES_NAME;
+ struct resource *r;
+ int err;
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, res_name);
+ if (!r) {
+ pr_err("Can't get resource for %s\n", res_name);
+ return -ENXIO;
+ }
+
+ err = request_irq(r->start, irq_h, 0, res_name, this);
+ if (err) {
+ pr_err("Can't own %s\n", res_name);
+ return err;
+ }
+
+ res->bch_low_interrupt = r->start;
+ res->bch_high_interrupt = r->end;
+ return 0;
+}
+
+static void release_bch_irq(struct gpmi_nand_data *this)
+{
+ struct resources *res = &this->resources;
+ int i = res->bch_low_interrupt;
+
+ for (; i <= res->bch_high_interrupt; i++)
+ free_irq(i, this);
+}
+
+static bool gpmi_dma_filter(struct dma_chan *chan, void *param)
+{
+ struct gpmi_nand_data *this = param;
+ struct resource *r = this->private;
+
+ if (!mxs_dma_is_apbh(chan))
+ return false;
+ /*
+ * only catch the GPMI dma channels :
+ * for mx23 : MX23_DMA_GPMI0 ~ MX23_DMA_GPMI3
+ * (These four channels share the same IRQ!)
+ *
+ * for mx28 : MX28_DMA_GPMI0 ~ MX28_DMA_GPMI7
+ * (These eight channels share the same IRQ!)
+ */
+ if (r->start <= chan->chan_id && chan->chan_id <= r->end) {
+ chan->private = &this->dma_data;
+ return true;
+ }
+ return false;
+}
+
+static void release_dma_channels(struct gpmi_nand_data *this)
+{
+ unsigned int i;
+ for (i = 0; i < DMA_CHANS; i++)
+ if (this->dma_chans[i]) {
+ dma_release_channel(this->dma_chans[i]);
+ this->dma_chans[i] = NULL;
+ }
+}
+
+static int __devinit acquire_dma_channels(struct gpmi_nand_data *this)
+{
+ struct platform_device *pdev = this->pdev;
+ struct gpmi_nand_platform_data *pdata = this->pdata;
+ struct resources *res = &this->resources;
+ struct resource *r, *r_dma;
+ unsigned int i;
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_DMA,
+ GPMI_NAND_DMA_CHANNELS_RES_NAME);
+ r_dma = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
+ GPMI_NAND_DMA_INTERRUPT_RES_NAME);
+ if (!r || !r_dma) {
+ pr_err("Can't get resource for DMA\n");
+ return -ENXIO;
+ }
+
+ /* used in gpmi_dma_filter() */
+ this->private = r;
+
+ for (i = r->start; i <= r->end; i++) {
+ struct dma_chan *dma_chan;
+ dma_cap_mask_t mask;
+
+ if (i - r->start >= pdata->max_chip_count)
+ break;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ /* get the DMA interrupt */
+ if (r_dma->start == r_dma->end) {
+ /* only register the first. */
+ if (i == r->start)
+ this->dma_data.chan_irq = r_dma->start;
+ else
+ this->dma_data.chan_irq = NO_IRQ;
+ } else
+ this->dma_data.chan_irq = r_dma->start + (i - r->start);
+
+ dma_chan = dma_request_channel(mask, gpmi_dma_filter, this);
+ if (!dma_chan)
+ goto acquire_err;
+
+ /* fill the first empty item */
+ this->dma_chans[i - r->start] = dma_chan;
+ }
+
+ res->dma_low_channel = r->start;
+ res->dma_high_channel = i;
+ return 0;
+
+acquire_err:
+ pr_err("Can't acquire DMA channel %u\n", i);
+ release_dma_channels(this);
+ return -EINVAL;
+}
+
+static int __devinit acquire_resources(struct gpmi_nand_data *this)
+{
+ struct resources *res = &this->resources;
+ int ret;
+
+ ret = acquire_register_block(this, GPMI_NAND_GPMI_REGS_ADDR_RES_NAME);
+ if (ret)
+ goto exit_regs;
+
+ ret = acquire_register_block(this, GPMI_NAND_BCH_REGS_ADDR_RES_NAME);
+ if (ret)
+ goto exit_regs;
+
+ ret = acquire_bch_irq(this, bch_irq);
+ if (ret)
+ goto exit_regs;
+
+ ret = acquire_dma_channels(this);
+ if (ret)
+ goto exit_dma_channels;
+
+ res->clock = clk_get(&this->pdev->dev, NULL);
+ if (IS_ERR(res->clock)) {
+ pr_err("can not get the clock\n");
+ ret = -ENOENT;
+ goto exit_clock;
+ }
+ return 0;
+
+exit_clock:
+ release_dma_channels(this);
+exit_dma_channels:
+ release_bch_irq(this);
+exit_regs:
+ release_register_block(this);
+ return ret;
+}
+
+static void release_resources(struct gpmi_nand_data *this)
+{
+ struct resources *r = &this->resources;
+
+ clk_put(r->clock);
+ release_register_block(this);
+ release_bch_irq(this);
+ release_dma_channels(this);
+}
+
+static int __devinit init_hardware(struct gpmi_nand_data *this)
+{
+ int ret;
+
+ /*
+ * This structure contains the "safe" GPMI timing that should succeed
+ * with any NAND Flash device
+ * (although, with less-than-optimal performance).
+ */
+ struct nand_timing safe_timing = {
+ .data_setup_in_ns = 80,
+ .data_hold_in_ns = 60,
+ .address_setup_in_ns = 25,
+ .gpmi_sample_delay_in_ns = 6,
+ .tREA_in_ns = -1,
+ .tRLOH_in_ns = -1,
+ .tRHOH_in_ns = -1,
+ };
+
+ /* Initialize the hardwares. */
+ ret = gpmi_init(this);
+ if (ret)
+ return ret;
+
+ this->timing = safe_timing;
+ return 0;
+}
+
+static int read_page_prepare(struct gpmi_nand_data *this,
+ void *destination, unsigned length,
+ void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+ void **use_virt, dma_addr_t *use_phys)
+{
+ struct device *dev = this->dev;
+
+ if (virt_addr_valid(destination)) {
+ dma_addr_t dest_phys;
+
+ dest_phys = dma_map_single(dev, destination,
+ length, DMA_FROM_DEVICE);
+ if (dma_mapping_error(dev, dest_phys)) {
+ if (alt_size < length) {
+ pr_err("Alternate buffer is too small\n");
+ return -ENOMEM;
+ }
+ goto map_failed;
+ }
+ *use_virt = destination;
+ *use_phys = dest_phys;
+ this->direct_dma_map_ok = true;
+ return 0;
+ }
+
+map_failed:
+ *use_virt = alt_virt;
+ *use_phys = alt_phys;
+ this->direct_dma_map_ok = false;
+ return 0;
+}
+
+static inline void read_page_end(struct gpmi_nand_data *this,
+ void *destination, unsigned length,
+ void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+ void *used_virt, dma_addr_t used_phys)
+{
+ if (this->direct_dma_map_ok)
+ dma_unmap_single(this->dev, used_phys, length, DMA_FROM_DEVICE);
+}
+
+static inline void read_page_swap_end(struct gpmi_nand_data *this,
+ void *destination, unsigned length,
+ void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+ void *used_virt, dma_addr_t used_phys)
+{
+ if (!this->direct_dma_map_ok)
+ memcpy(destination, alt_virt, length);
+}
+
+static int send_page_prepare(struct gpmi_nand_data *this,
+ const void *source, unsigned length,
+ void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+ const void **use_virt, dma_addr_t *use_phys)
+{
+ struct device *dev = this->dev;
+
+ if (virt_addr_valid(source)) {
+ dma_addr_t source_phys;
+
+ source_phys = dma_map_single(dev, (void *)source, length,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(dev, source_phys)) {
+ if (alt_size < length) {
+ pr_err("Alternate buffer is too small\n");
+ return -ENOMEM;
+ }
+ goto map_failed;
+ }
+ *use_virt = source;
+ *use_phys = source_phys;
+ return 0;
+ }
+map_failed:
+ /*
+ * Copy the content of the source buffer into the alternate
+ * buffer and set up the return values accordingly.
+ */
+ memcpy(alt_virt, source, length);
+
+ *use_virt = alt_virt;
+ *use_phys = alt_phys;
+ return 0;
+}
+
+static void send_page_end(struct gpmi_nand_data *this,
+ const void *source, unsigned length,
+ void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+ const void *used_virt, dma_addr_t used_phys)
+{
+ struct device *dev = this->dev;
+ if (used_virt == source)
+ dma_unmap_single(dev, used_phys, length, DMA_TO_DEVICE);
+}
+
+static void gpmi_free_dma_buffer(struct gpmi_nand_data *this)
+{
+ struct device *dev = this->dev;
+
+ if (this->page_buffer_virt && virt_addr_valid(this->page_buffer_virt))
+ dma_free_coherent(dev, this->page_buffer_size,
+ this->page_buffer_virt,
+ this->page_buffer_phys);
+ kfree(this->cmd_buffer);
+ kfree(this->data_buffer_dma);
+
+ this->cmd_buffer = NULL;
+ this->data_buffer_dma = NULL;
+ this->page_buffer_virt = NULL;
+ this->page_buffer_size = 0;
+}
+
+/* Allocate the DMA buffers */
+static int gpmi_alloc_dma_buffer(struct gpmi_nand_data *this)
+{
+ struct bch_geometry *geo = &this->bch_geometry;
+ struct device *dev = this->dev;
+
+ /* [1] Allocate a command buffer. PAGE_SIZE is enough. */
+ this->cmd_buffer = kzalloc(PAGE_SIZE, GFP_DMA);
+ if (this->cmd_buffer == NULL)
+ goto error_alloc;
+
+ /* [2] Allocate a read/write data buffer. PAGE_SIZE is enough. */
+ this->data_buffer_dma = kzalloc(PAGE_SIZE, GFP_DMA);
+ if (this->data_buffer_dma == NULL)
+ goto error_alloc;
+
+ /*
+ * [3] Allocate the page buffer.
+ *
+ * Both the payload buffer and the auxiliary buffer must appear on
+ * 32-bit boundaries. We presume the size of the payload buffer is a
+ * power of two and is much larger than four, which guarantees the
+ * auxiliary buffer will appear on a 32-bit boundary.
+ */
+ this->page_buffer_size = geo->payload_size + geo->auxiliary_size;
+ this->page_buffer_virt = dma_alloc_coherent(dev, this->page_buffer_size,
+ &this->page_buffer_phys, GFP_DMA);
+ if (!this->page_buffer_virt)
+ goto error_alloc;
+
+
+ /* Slice up the page buffer. */
+ this->payload_virt = this->page_buffer_virt;
+ this->payload_phys = this->page_buffer_phys;
+ this->auxiliary_virt = this->payload_virt + geo->payload_size;
+ this->auxiliary_phys = this->payload_phys + geo->payload_size;
+ return 0;
+
+error_alloc:
+ gpmi_free_dma_buffer(this);
+ pr_err("allocate DMA buffer ret!!\n");
+ return -ENOMEM;
+}
+
+static void gpmi_cmd_ctrl(struct mtd_info *mtd, int data, unsigned int ctrl)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+ int ret;
+
+ /*
+ * Every operation begins with a command byte and a series of zero or
+ * more address bytes. These are distinguished by either the Address
+ * Latch Enable (ALE) or Command Latch Enable (CLE) signals being
+ * asserted. When MTD is ready to execute the command, it will deassert
+ * both latch enables.
+ *
+ * Rather than run a separate DMA operation for every single byte, we
+ * queue them up and run a single DMA operation for the entire series
+ * of command and data bytes. NAND_CMD_NONE means the END of the queue.
+ */
+ if ((ctrl & (NAND_ALE | NAND_CLE))) {
+ if (data != NAND_CMD_NONE)
+ this->cmd_buffer[this->command_length++] = data;
+ return;
+ }
+
+ if (!this->command_length)
+ return;
+
+ ret = gpmi_send_command(this);
+ if (ret)
+ pr_err("Chip: %u, Error %d\n", this->current_chip, ret);
+
+ this->command_length = 0;
+}
+
+static int gpmi_dev_ready(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+
+ return gpmi_is_ready(this, this->current_chip);
+}
+
+static void gpmi_select_chip(struct mtd_info *mtd, int chipnr)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+
+ if ((this->current_chip < 0) && (chipnr >= 0))
+ gpmi_begin(this);
+ else if ((this->current_chip >= 0) && (chipnr < 0))
+ gpmi_end(this);
+
+ this->current_chip = chipnr;
+}
+
+static void gpmi_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+
+ pr_debug("len is %d\n", len);
+ this->upper_buf = buf;
+ this->upper_len = len;
+
+ gpmi_read_data(this);
+}
+
+static void gpmi_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+
+ pr_debug("len is %d\n", len);
+ this->upper_buf = (uint8_t *)buf;
+ this->upper_len = len;
+
+ gpmi_send_data(this);
+}
+
+static uint8_t gpmi_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+ uint8_t *buf = this->data_buffer_dma;
+
+ gpmi_read_buf(mtd, buf, 1);
+ return buf[0];
+}
+
+/*
+ * Handles block mark swapping.
+ * It can be called in swapping the block mark, or swapping it back,
+ * because the the operations are the same.
+ */
+static void block_mark_swapping(struct gpmi_nand_data *this,
+ void *payload, void *auxiliary)
+{
+ struct bch_geometry *nfc_geo = &this->bch_geometry;
+ unsigned char *p;
+ unsigned char *a;
+ unsigned int bit;
+ unsigned char mask;
+ unsigned char from_data;
+ unsigned char from_oob;
+
+ if (!this->swap_block_mark)
+ return;
+
+ /*
+ * If control arrives here, we're swapping. Make some convenience
+ * variables.
+ */
+ bit = nfc_geo->block_mark_bit_offset;
+ p = payload + nfc_geo->block_mark_byte_offset;
+ a = auxiliary;
+
+ /*
+ * Get the byte from the data area that overlays the block mark. Since
+ * the ECC engine applies its own view to the bits in the page, the
+ * physical block mark won't (in general) appear on a byte boundary in
+ * the data.
+ */
+ from_data = (p[0] >> bit) | (p[1] << (8 - bit));
+
+ /* Get the byte from the OOB. */
+ from_oob = a[0];
+
+ /* Swap them. */
+ a[0] = from_data;
+
+ mask = (0x1 << bit) - 1;
+ p[0] = (p[0] & mask) | (from_oob << bit);
+
+ mask = ~0 << bit;
+ p[1] = (p[1] & mask) | (from_oob >> (8 - bit));
+}
+
+static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int page)
+{
+ struct gpmi_nand_data *this = chip->priv;
+ struct bch_geometry *nfc_geo = &this->bch_geometry;
+ void *payload_virt;
+ dma_addr_t payload_phys;
+ void *auxiliary_virt;
+ dma_addr_t auxiliary_phys;
+ unsigned int i;
+ unsigned char *status;
+ unsigned int failed;
+ unsigned int corrected;
+ int ret;
+
+ pr_debug("page number is : %d\n", page);
+ ret = read_page_prepare(this, buf, mtd->writesize,
+ this->payload_virt, this->payload_phys,
+ nfc_geo->payload_size,
+ &payload_virt, &payload_phys);
+ if (ret) {
+ pr_err("Inadequate DMA buffer\n");
+ ret = -ENOMEM;
+ return ret;
+ }
+ auxiliary_virt = this->auxiliary_virt;
+ auxiliary_phys = this->auxiliary_phys;
+
+ /* go! */
+ ret = gpmi_read_page(this, payload_phys, auxiliary_phys);
+ read_page_end(this, buf, mtd->writesize,
+ this->payload_virt, this->payload_phys,
+ nfc_geo->payload_size,
+ payload_virt, payload_phys);
+ if (ret) {
+ pr_err("Error in ECC-based read: %d\n", ret);
+ goto exit_nfc;
+ }
+
+ /* handle the block mark swapping */
+ block_mark_swapping(this, payload_virt, auxiliary_virt);
+
+ /* Loop over status bytes, accumulating ECC status. */
+ failed = 0;
+ corrected = 0;
+ status = auxiliary_virt + nfc_geo->auxiliary_status_offset;
+
+ for (i = 0; i < nfc_geo->ecc_chunk_count; i++, status++) {
+ if ((*status == STATUS_GOOD) || (*status == STATUS_ERASED))
+ continue;
+
+ if (*status == STATUS_UNCORRECTABLE) {
+ failed++;
+ continue;
+ }
+ corrected += *status;
+ }
+
+ /*
+ * Propagate ECC status to the owning MTD only when failed or
+ * corrected times nearly reaches our ECC correction threshold.
+ */
+ if (failed || corrected >= (nfc_geo->ecc_strength - 1)) {
+ mtd->ecc_stats.failed += failed;
+ mtd->ecc_stats.corrected += corrected;
+ }
+
+ /*
+ * It's time to deliver the OOB bytes. See gpmi_ecc_read_oob() for
+ * details about our policy for delivering the OOB.
+ *
+ * We fill the caller's buffer with set bits, and then copy the block
+ * mark to th caller's buffer. Note that, if block mark swapping was
+ * necessary, it has already been done, so we can rely on the first
+ * byte of the auxiliary buffer to contain the block mark.
+ */
+ memset(chip->oob_poi, ~0, mtd->oobsize);
+ chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0];
+
+ read_page_swap_end(this, buf, mtd->writesize,
+ this->payload_virt, this->payload_phys,
+ nfc_geo->payload_size,
+ payload_virt, payload_phys);
+exit_nfc:
+ return ret;
+}
+
+static void gpmi_ecc_write_page(struct mtd_info *mtd,
+ struct nand_chip *chip, const uint8_t *buf)
+{
+ struct gpmi_nand_data *this = chip->priv;
+ struct bch_geometry *nfc_geo = &this->bch_geometry;
+ const void *payload_virt;
+ dma_addr_t payload_phys;
+ const void *auxiliary_virt;
+ dma_addr_t auxiliary_phys;
+ int ret;
+
+ pr_debug("ecc write page.\n");
+ if (this->swap_block_mark) {
+ /*
+ * If control arrives here, we're doing block mark swapping.
+ * Since we can't modify the caller's buffers, we must copy them
+ * into our own.
+ */
+ memcpy(this->payload_virt, buf, mtd->writesize);
+ payload_virt = this->payload_virt;
+ payload_phys = this->payload_phys;
+
+ memcpy(this->auxiliary_virt, chip->oob_poi,
+ nfc_geo->auxiliary_size);
+ auxiliary_virt = this->auxiliary_virt;
+ auxiliary_phys = this->auxiliary_phys;
+
+ /* Handle block mark swapping. */
+ block_mark_swapping(this,
+ (void *) payload_virt, (void *) auxiliary_virt);
+ } else {
+ /*
+ * If control arrives here, we're not doing block mark swapping,
+ * so we can to try and use the caller's buffers.
+ */
+ ret = send_page_prepare(this,
+ buf, mtd->writesize,
+ this->payload_virt, this->payload_phys,
+ nfc_geo->payload_size,
+ &payload_virt, &payload_phys);
+ if (ret) {
+ pr_err("Inadequate payload DMA buffer\n");
+ return;
+ }
+
+ ret = send_page_prepare(this,
+ chip->oob_poi, mtd->oobsize,
+ this->auxiliary_virt, this->auxiliary_phys,
+ nfc_geo->auxiliary_size,
+ &auxiliary_virt, &auxiliary_phys);
+ if (ret) {
+ pr_err("Inadequate auxiliary DMA buffer\n");
+ goto exit_auxiliary;
+ }
+ }
+
+ /* Ask the NFC. */
+ ret = gpmi_send_page(this, payload_phys, auxiliary_phys);
+ if (ret)
+ pr_err("Error in ECC-based write: %d\n", ret);
+
+ if (!this->swap_block_mark) {
+ send_page_end(this, chip->oob_poi, mtd->oobsize,
+ this->auxiliary_virt, this->auxiliary_phys,
+ nfc_geo->auxiliary_size,
+ auxiliary_virt, auxiliary_phys);
+exit_auxiliary:
+ send_page_end(this, buf, mtd->writesize,
+ this->payload_virt, this->payload_phys,
+ nfc_geo->payload_size,
+ payload_virt, payload_phys);
+ }
+}
+
+/*
+ * There are several places in this driver where we have to handle the OOB and
+ * block marks. This is the function where things are the most complicated, so
+ * this is where we try to explain it all. All the other places refer back to
+ * here.
+ *
+ * These are the rules, in order of decreasing importance:
+ *
+ * 1) Nothing the caller does can be allowed to imperil the block mark.
+ *
+ * 2) In read operations, the first byte of the OOB we return must reflect the
+ * true state of the block mark, no matter where that block mark appears in
+ * the physical page.
+ *
+ * 3) ECC-based read operations return an OOB full of set bits (since we never
+ * allow ECC-based writes to the OOB, it doesn't matter what ECC-based reads
+ * return).
+ *
+ * 4) "Raw" read operations return a direct view of the physical bytes in the
+ * page, using the conventional definition of which bytes are data and which
+ * are OOB. This gives the caller a way to see the actual, physical bytes
+ * in the page, without the distortions applied by our ECC engine.
+ *
+ *
+ * What we do for this specific read operation depends on two questions:
+ *
+ * 1) Are we doing a "raw" read, or an ECC-based read?
+ *
+ * 2) Are we using block mark swapping or transcription?
+ *
+ * There are four cases, illustrated by the following Karnaugh map:
+ *
+ * | Raw | ECC-based |
+ * -------------+-------------------------+-------------------------+
+ * | Read the conventional | |
+ * | OOB at the end of the | |
+ * Swapping | page and return it. It | |
+ * | contains exactly what | |
+ * | we want. | Read the block mark and |
+ * -------------+-------------------------+ return it in a buffer |
+ * | Read the conventional | full of set bits. |
+ * | OOB at the end of the | |
+ * | page and also the block | |
+ * Transcribing | mark in the metadata. | |
+ * | Copy the block mark | |
+ * | into the first byte of | |
+ * | the OOB. | |
+ * -------------+-------------------------+-------------------------+
+ *
+ * Note that we break rule #4 in the Transcribing/Raw case because we're not
+ * giving an accurate view of the actual, physical bytes in the page (we're
+ * overwriting the block mark). That's OK because it's more important to follow
+ * rule #2.
+ *
+ * It turns out that knowing whether we want an "ECC-based" or "raw" read is not
+ * easy. When reading a page, for example, the NAND Flash MTD code calls our
+ * ecc.read_page or ecc.read_page_raw function. Thus, the fact that MTD wants an
+ * ECC-based or raw view of the page is implicit in which function it calls
+ * (there is a similar pair of ECC-based/raw functions for writing).
+ *
+ * Since MTD assumes the OOB is not covered by ECC, there is no pair of
+ * ECC-based/raw functions for reading or or writing the OOB. The fact that the
+ * caller wants an ECC-based or raw view of the page is not propagated down to
+ * this driver.
+ */
+static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
+ int page, int sndcmd)
+{
+ struct gpmi_nand_data *this = chip->priv;
+
+ pr_debug("page number is %d\n", page);
+ /* clear the OOB buffer */
+ memset(chip->oob_poi, ~0, mtd->oobsize);
+
+ /* Read out the conventional OOB. */
+ chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ /*
+ * Now, we want to make sure the block mark is correct. In the
+ * Swapping/Raw case, we already have it. Otherwise, we need to
+ * explicitly read it.
+ */
+ if (!this->swap_block_mark) {
+ /* Read the block mark into the first byte of the OOB buffer. */
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+ chip->oob_poi[0] = chip->read_byte(mtd);
+ }
+
+ /*
+ * Return true, indicating that the next call to this function must send
+ * a command.
+ */
+ return true;
+}
+
+static int
+gpmi_ecc_write_oob(struct mtd_info *mtd, struct nand_chip *chip, int page)
+{
+ /*
+ * The BCH will use all the (page + oob).
+ * Our gpmi_hw_ecclayout can only prohibit the JFFS2 to write the oob.
+ * But it can not stop some ioctls such MEMWRITEOOB which uses
+ * MTD_OPS_PLACE_OOB. So We have to implement this function to prohibit
+ * these ioctls too.
+ */
+ return -EPERM;
+}
+
+static int gpmi_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+ int block, ret = 0;
+ uint8_t *block_mark;
+ int column, page, status, chipnr;
+
+ /* Get block number */
+ block = (int)(ofs >> chip->bbt_erase_shift);
+ if (chip->bbt)
+ chip->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
+
+ /* Do we have a flash based bad block table ? */
+ if (chip->options & NAND_BBT_USE_FLASH)
+ ret = nand_update_bbt(mtd, ofs);
+ else {
+ chipnr = (int)(ofs >> chip->chip_shift);
+ chip->select_chip(mtd, chipnr);
+
+ column = this->swap_block_mark ? mtd->writesize : 0;
+
+ /* Write the block mark. */
+ block_mark = this->data_buffer_dma;
+ block_mark[0] = 0; /* bad block marker */
+
+ /* Shift to get page */
+ page = (int)(ofs >> chip->page_shift);
+
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, column, page);
+ chip->write_buf(mtd, block_mark, 1);
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+ status = chip->waitfunc(mtd, chip);
+ if (status & NAND_STATUS_FAIL)
+ ret = -EIO;
+
+ chip->select_chip(mtd, -1);
+ }
+ if (!ret)
+ mtd->ecc_stats.badblocks++;
+
+ return ret;
+}
+
+static int __devinit nand_boot_set_geometry(struct gpmi_nand_data *this)
+{
+ struct boot_rom_geometry *geometry = &this->rom_geometry;
+
+ /*
+ * Set the boot block stride size.
+ *
+ * In principle, we should be reading this from the OTP bits, since
+ * that's where the ROM is going to get it. In fact, we don't have any
+ * way to read the OTP bits, so we go with the default and hope for the
+ * best.
+ */
+ geometry->stride_size_in_pages = 64;
+
+ /*
+ * Set the search area stride exponent.
+ *
+ * In principle, we should be reading this from the OTP bits, since
+ * that's where the ROM is going to get it. In fact, we don't have any
+ * way to read the OTP bits, so we go with the default and hope for the
+ * best.
+ */
+ geometry->search_area_stride_exponent = 2;
+ return 0;
+}
+
+static const char *fingerprint = "STMP";
+static int __devinit mx23_check_transcription_stamp(struct gpmi_nand_data *this)
+{
+ struct boot_rom_geometry *rom_geo = &this->rom_geometry;
+ struct device *dev = this->dev;
+ struct mtd_info *mtd = &this->mtd;
+ struct nand_chip *chip = &this->nand;
+ unsigned int search_area_size_in_strides;
+ unsigned int stride;
+ unsigned int page;
+ loff_t byte;
+ uint8_t *buffer = chip->buffers->databuf;
+ int saved_chip_number;
+ int found_an_ncb_fingerprint = false;
+
+ /* Compute the number of strides in a search area. */
+ search_area_size_in_strides = 1 << rom_geo->search_area_stride_exponent;
+
+ saved_chip_number = this->current_chip;
+ chip->select_chip(mtd, 0);
+
+ /*
+ * Loop through the first search area, looking for the NCB fingerprint.
+ */
+ dev_dbg(dev, "Scanning for an NCB fingerprint...\n");
+
+ for (stride = 0; stride < search_area_size_in_strides; stride++) {
+ /* Compute the page and byte addresses. */
+ page = stride * rom_geo->stride_size_in_pages;
+ byte = page * mtd->writesize;
+
+ dev_dbg(dev, "Looking for a fingerprint in page 0x%x\n", page);
+
+ /*
+ * Read the NCB fingerprint. The fingerprint is four bytes long
+ * and starts in the 12th byte of the page.
+ */
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 12, page);
+ chip->read_buf(mtd, buffer, strlen(fingerprint));
+
+ /* Look for the fingerprint. */
+ if (!memcmp(buffer, fingerprint, strlen(fingerprint))) {
+ found_an_ncb_fingerprint = true;
+ break;
+ }
+
+ }
+
+ chip->select_chip(mtd, saved_chip_number);
+
+ if (found_an_ncb_fingerprint)
+ dev_dbg(dev, "\tFound a fingerprint\n");
+ else
+ dev_dbg(dev, "\tNo fingerprint found\n");
+ return found_an_ncb_fingerprint;
+}
+
+/* Writes a transcription stamp. */
+static int __devinit mx23_write_transcription_stamp(struct gpmi_nand_data *this)
+{
+ struct device *dev = this->dev;
+ struct boot_rom_geometry *rom_geo = &this->rom_geometry;
+ struct mtd_info *mtd = &this->mtd;
+ struct nand_chip *chip = &this->nand;
+ unsigned int block_size_in_pages;
+ unsigned int search_area_size_in_strides;
+ unsigned int search_area_size_in_pages;
+ unsigned int search_area_size_in_blocks;
+ unsigned int block;
+ unsigned int stride;
+ unsigned int page;
+ loff_t byte;
+ uint8_t *buffer = chip->buffers->databuf;
+ int saved_chip_number;
+ int status;
+
+ /* Compute the search area geometry. */
+ block_size_in_pages = mtd->erasesize / mtd->writesize;
+ search_area_size_in_strides = 1 << rom_geo->search_area_stride_exponent;
+ search_area_size_in_pages = search_area_size_in_strides *
+ rom_geo->stride_size_in_pages;
+ search_area_size_in_blocks =
+ (search_area_size_in_pages + (block_size_in_pages - 1)) /
+ block_size_in_pages;
+
+ dev_dbg(dev, "Search Area Geometry :\n");
+ dev_dbg(dev, "\tin Blocks : %u\n", search_area_size_in_blocks);
+ dev_dbg(dev, "\tin Strides: %u\n", search_area_size_in_strides);
+ dev_dbg(dev, "\tin Pages : %u\n", search_area_size_in_pages);
+
+ /* Select chip 0. */
+ saved_chip_number = this->current_chip;
+ chip->select_chip(mtd, 0);
+
+ /* Loop over blocks in the first search area, erasing them. */
+ dev_dbg(dev, "Erasing the search area...\n");
+
+ for (block = 0; block < search_area_size_in_blocks; block++) {
+ /* Compute the page address. */
+ page = block * block_size_in_pages;
+
+ /* Erase this block. */
+ dev_dbg(dev, "\tErasing block 0x%x\n", block);
+ chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page);
+ chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1);
+
+ /* Wait for the erase to finish. */
+ status = chip->waitfunc(mtd, chip);
+ if (status & NAND_STATUS_FAIL)
+ dev_err(dev, "[%s] Erase failed.\n", __func__);
+ }
+
+ /* Write the NCB fingerprint into the page buffer. */
+ memset(buffer, ~0, mtd->writesize);
+ memset(chip->oob_poi, ~0, mtd->oobsize);
+ memcpy(buffer + 12, fingerprint, strlen(fingerprint));
+
+ /* Loop through the first search area, writing NCB fingerprints. */
+ dev_dbg(dev, "Writing NCB fingerprints...\n");
+ for (stride = 0; stride < search_area_size_in_strides; stride++) {
+ /* Compute the page and byte addresses. */
+ page = stride * rom_geo->stride_size_in_pages;
+ byte = page * mtd->writesize;
+
+ /* Write the first page of the current stride. */
+ dev_dbg(dev, "Writing an NCB fingerprint in page 0x%x\n", page);
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
+ chip->ecc.write_page_raw(mtd, chip, buffer);
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+ /* Wait for the write to finish. */
+ status = chip->waitfunc(mtd, chip);
+ if (status & NAND_STATUS_FAIL)
+ dev_err(dev, "[%s] Write failed.\n", __func__);
+ }
+
+ /* Deselect chip 0. */
+ chip->select_chip(mtd, saved_chip_number);
+ return 0;
+}
+
+static int __devinit mx23_boot_init(struct gpmi_nand_data *this)
+{
+ struct device *dev = this->dev;
+ struct nand_chip *chip = &this->nand;
+ struct mtd_info *mtd = &this->mtd;
+ unsigned int block_count;
+ unsigned int block;
+ int chipnr;
+ int page;
+ loff_t byte;
+ uint8_t block_mark;
+ int ret = 0;
+
+ /*
+ * If control arrives here, we can't use block mark swapping, which
+ * means we're forced to use transcription. First, scan for the
+ * transcription stamp. If we find it, then we don't have to do
+ * anything -- the block marks are already transcribed.
+ */
+ if (mx23_check_transcription_stamp(this))
+ return 0;
+
+ /*
+ * If control arrives here, we couldn't find a transcription stamp, so
+ * so we presume the block marks are in the conventional location.
+ */
+ dev_dbg(dev, "Transcribing bad block marks...\n");
+
+ /* Compute the number of blocks in the entire medium. */
+ block_count = chip->chipsize >> chip->phys_erase_shift;
+
+ /*
+ * Loop over all the blocks in the medium, transcribing block marks as
+ * we go.
+ */
+ for (block = 0; block < block_count; block++) {
+ /*
+ * Compute the chip, page and byte addresses for this block's
+ * conventional mark.
+ */
+ chipnr = block >> (chip->chip_shift - chip->phys_erase_shift);
+ page = block << (chip->phys_erase_shift - chip->page_shift);
+ byte = block << chip->phys_erase_shift;
+
+ /* Send the command to read the conventional block mark. */
+ chip->select_chip(mtd, chipnr);
+ chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
+ block_mark = chip->read_byte(mtd);
+ chip->select_chip(mtd, -1);
+
+ /*
+ * Check if the block is marked bad. If so, we need to mark it
+ * again, but this time the result will be a mark in the
+ * location where we transcribe block marks.
+ */
+ if (block_mark != 0xff) {
+ dev_dbg(dev, "Transcribing mark in block %u\n", block);
+ ret = chip->block_markbad(mtd, byte);
+ if (ret)
+ dev_err(dev, "Failed to mark block bad with "
+ "ret %d\n", ret);
+ }
+ }
+
+ /* Write the stamp that indicates we've transcribed the block marks. */
+ mx23_write_transcription_stamp(this);
+ return 0;
+}
+
+static int __devinit nand_boot_init(struct gpmi_nand_data *this)
+{
+ nand_boot_set_geometry(this);
+
+ /* This is ROM arch-specific initilization before the BBT scanning. */
+ if (GPMI_IS_MX23(this))
+ return mx23_boot_init(this);
+ return 0;
+}
+
+static int __devinit gpmi_set_geometry(struct gpmi_nand_data *this)
+{
+ int ret;
+
+ /* Free the temporary DMA memory for reading ID. */
+ gpmi_free_dma_buffer(this);
+
+ /* Set up the NFC geometry which is used by BCH. */
+ ret = bch_set_geometry(this);
+ if (ret) {
+ pr_err("set geometry ret : %d\n", ret);
+ return ret;
+ }
+
+ /* Alloc the new DMA buffers according to the pagesize and oobsize */
+ return gpmi_alloc_dma_buffer(this);
+}
+
+static int gpmi_pre_bbt_scan(struct gpmi_nand_data *this)
+{
+ int ret;
+
+ /* Set up swap_block_mark, must be set before the gpmi_set_geometry() */
+ if (GPMI_IS_MX23(this))
+ this->swap_block_mark = false;
+ else
+ this->swap_block_mark = true;
+
+ /* Set up the medium geometry */
+ ret = gpmi_set_geometry(this);
+ if (ret)
+ return ret;
+
+ /* NAND boot init, depends on the gpmi_set_geometry(). */
+ return nand_boot_init(this);
+}
+
+static int gpmi_scan_bbt(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+ int ret;
+
+ /* Prepare for the BBT scan. */
+ ret = gpmi_pre_bbt_scan(this);
+ if (ret)
+ return ret;
+
+ /* use the default BBT implementation */
+ return nand_default_bbt(mtd);
+}
+
+void gpmi_nfc_exit(struct gpmi_nand_data *this)
+{
+ nand_release(&this->mtd);
+ gpmi_free_dma_buffer(this);
+}
+
+static int __devinit gpmi_nfc_init(struct gpmi_nand_data *this)
+{
+ struct gpmi_nand_platform_data *pdata = this->pdata;
+ struct mtd_info *mtd = &this->mtd;
+ struct nand_chip *chip = &this->nand;
+ int ret;
+
+ /* init current chip */
+ this->current_chip = -1;
+
+ /* init the MTD data structures */
+ mtd->priv = chip;
+ mtd->name = "gpmi-nand";
+ mtd->owner = THIS_MODULE;
+
+ /* init the nand_chip{}, we don't support a 16-bit NAND Flash bus. */
+ chip->priv = this;
+ chip->select_chip = gpmi_select_chip;
+ chip->cmd_ctrl = gpmi_cmd_ctrl;
+ chip->dev_ready = gpmi_dev_ready;
+ chip->read_byte = gpmi_read_byte;
+ chip->read_buf = gpmi_read_buf;
+ chip->write_buf = gpmi_write_buf;
+ chip->ecc.read_page = gpmi_ecc_read_page;
+ chip->ecc.write_page = gpmi_ecc_write_page;
+ chip->ecc.read_oob = gpmi_ecc_read_oob;
+ chip->ecc.write_oob = gpmi_ecc_write_oob;
+ chip->scan_bbt = gpmi_scan_bbt;
+ chip->badblock_pattern = &gpmi_bbt_descr;
+ chip->block_markbad = gpmi_block_markbad;
+ chip->options |= NAND_NO_SUBPAGE_WRITE;
+ chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.size = 1;
+ chip->ecc.layout = &gpmi_hw_ecclayout;
+
+ /* Allocate a temporary DMA buffer for reading ID in the nand_scan() */
+ this->bch_geometry.payload_size = 1024;
+ this->bch_geometry.auxiliary_size = 128;
+ ret = gpmi_alloc_dma_buffer(this);
+ if (ret)
+ goto err_out;
+
+ ret = nand_scan(mtd, pdata->max_chip_count);
+ if (ret) {
+ pr_err("Chip scan failed\n");
+ goto err_out;
+ }
+
+ ret = mtd_device_parse_register(mtd, NULL, NULL,
+ pdata->partitions, pdata->partition_count);
+ if (ret)
+ goto err_out;
+ return 0;
+
+err_out:
+ gpmi_nfc_exit(this);
+ return ret;
+}
+
+static int __devinit gpmi_nand_probe(struct platform_device *pdev)
+{
+ struct gpmi_nand_platform_data *pdata = pdev->dev.platform_data;
+ struct gpmi_nand_data *this;
+ int ret;
+
+ this = kzalloc(sizeof(*this), GFP_KERNEL);
+ if (!this) {
+ pr_err("Failed to allocate per-device memory\n");
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(pdev, this);
+ this->pdev = pdev;
+ this->dev = &pdev->dev;
+ this->pdata = pdata;
+
+ if (pdata->platform_init) {
+ ret = pdata->platform_init();
+ if (ret)
+ goto platform_init_error;
+ }
+
+ ret = acquire_resources(this);
+ if (ret)
+ goto exit_acquire_resources;
+
+ ret = init_hardware(this);
+ if (ret)
+ goto exit_nfc_init;
+
+ ret = gpmi_nfc_init(this);
+ if (ret)
+ goto exit_nfc_init;
+
+ return 0;
+
+exit_nfc_init:
+ release_resources(this);
+platform_init_error:
+exit_acquire_resources:
+ platform_set_drvdata(pdev, NULL);
+ kfree(this);
+ return ret;
+}
+
+static int __exit gpmi_nand_remove(struct platform_device *pdev)
+{
+ struct gpmi_nand_data *this = platform_get_drvdata(pdev);
+
+ gpmi_nfc_exit(this);
+ release_resources(this);
+ platform_set_drvdata(pdev, NULL);
+ kfree(this);
+ return 0;
+}
+
+static const struct platform_device_id gpmi_ids[] = {
+ {
+ .name = "imx23-gpmi-nand",
+ .driver_data = IS_MX23,
+ }, {
+ .name = "imx28-gpmi-nand",
+ .driver_data = IS_MX28,
+ }, {},
+};
+
+static struct platform_driver gpmi_nand_driver = {
+ .driver = {
+ .name = "gpmi-nand",
+ },
+ .probe = gpmi_nand_probe,
+ .remove = __exit_p(gpmi_nand_remove),
+ .id_table = gpmi_ids,
+};
+
+static int __init gpmi_nand_init(void)
+{
+ int err;
+
+ err = platform_driver_register(&gpmi_nand_driver);
+ if (err == 0)
+ printk(KERN_INFO "GPMI NAND driver registered. (IMX)\n");
+ else
+ pr_err("i.MX GPMI NAND driver registration failed\n");
+ return err;
+}
+
+static void __exit gpmi_nand_exit(void)
+{
+ platform_driver_unregister(&gpmi_nand_driver);
+}
+
+module_init(gpmi_nand_init);
+module_exit(gpmi_nand_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("i.MX GPMI NAND Flash Controller Driver");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __DRIVERS_MTD_NAND_GPMI_NAND_H
+#define __DRIVERS_MTD_NAND_GPMI_NAND_H
+
+#include <linux/mtd/nand.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <mach/dma.h>
+
+struct resources {
+ void *gpmi_regs;
+ void *bch_regs;
+ unsigned int bch_low_interrupt;
+ unsigned int bch_high_interrupt;
+ unsigned int dma_low_channel;
+ unsigned int dma_high_channel;
+ struct clk *clock;
+};
+
+/**
+ * struct bch_geometry - BCH geometry description.
+ * @gf_len: The length of Galois Field. (e.g., 13 or 14)
+ * @ecc_strength: A number that describes the strength of the ECC
+ * algorithm.
+ * @page_size: The size, in bytes, of a physical page, including
+ * both data and OOB.
+ * @metadata_size: The size, in bytes, of the metadata.
+ * @ecc_chunk_size: The size, in bytes, of a single ECC chunk. Note
+ * the first chunk in the page includes both data and
+ * metadata, so it's a bit larger than this value.
+ * @ecc_chunk_count: The number of ECC chunks in the page,
+ * @payload_size: The size, in bytes, of the payload buffer.
+ * @auxiliary_size: The size, in bytes, of the auxiliary buffer.
+ * @auxiliary_status_offset: The offset into the auxiliary buffer at which
+ * the ECC status appears.
+ * @block_mark_byte_offset: The byte offset in the ECC-based page view at
+ * which the underlying physical block mark appears.
+ * @block_mark_bit_offset: The bit offset into the ECC-based page view at
+ * which the underlying physical block mark appears.
+ */
+struct bch_geometry {
+ unsigned int gf_len;
+ unsigned int ecc_strength;
+ unsigned int page_size;
+ unsigned int metadata_size;
+ unsigned int ecc_chunk_size;
+ unsigned int ecc_chunk_count;
+ unsigned int payload_size;
+ unsigned int auxiliary_size;
+ unsigned int auxiliary_status_offset;
+ unsigned int block_mark_byte_offset;
+ unsigned int block_mark_bit_offset;
+};
+
+/**
+ * struct boot_rom_geometry - Boot ROM geometry description.
+ * @stride_size_in_pages: The size of a boot block stride, in pages.
+ * @search_area_stride_exponent: The logarithm to base 2 of the size of a
+ * search area in boot block strides.
+ */
+struct boot_rom_geometry {
+ unsigned int stride_size_in_pages;
+ unsigned int search_area_stride_exponent;
+};
+
+/* DMA operations types */
+enum dma_ops_type {
+ DMA_FOR_COMMAND = 1,
+ DMA_FOR_READ_DATA,
+ DMA_FOR_WRITE_DATA,
+ DMA_FOR_READ_ECC_PAGE,
+ DMA_FOR_WRITE_ECC_PAGE
+};
+
+/**
+ * struct nand_timing - Fundamental timing attributes for NAND.
+ * @data_setup_in_ns: The data setup time, in nanoseconds. Usually the
+ * maximum of tDS and tWP. A negative value
+ * indicates this characteristic isn't known.
+ * @data_hold_in_ns: The data hold time, in nanoseconds. Usually the
+ * maximum of tDH, tWH and tREH. A negative value
+ * indicates this characteristic isn't known.
+ * @address_setup_in_ns: The address setup time, in nanoseconds. Usually
+ * the maximum of tCLS, tCS and tALS. A negative
+ * value indicates this characteristic isn't known.
+ * @gpmi_sample_delay_in_ns: A GPMI-specific timing parameter. A negative value
+ * indicates this characteristic isn't known.
+ * @tREA_in_ns: tREA, in nanoseconds, from the data sheet. A
+ * negative value indicates this characteristic isn't
+ * known.
+ * @tRLOH_in_ns: tRLOH, in nanoseconds, from the data sheet. A
+ * negative value indicates this characteristic isn't
+ * known.
+ * @tRHOH_in_ns: tRHOH, in nanoseconds, from the data sheet. A
+ * negative value indicates this characteristic isn't
+ * known.
+ */
+struct nand_timing {
+ int8_t data_setup_in_ns;
+ int8_t data_hold_in_ns;
+ int8_t address_setup_in_ns;
+ int8_t gpmi_sample_delay_in_ns;
+ int8_t tREA_in_ns;
+ int8_t tRLOH_in_ns;
+ int8_t tRHOH_in_ns;
+};
+
+struct gpmi_nand_data {
+ /* System Interface */
+ struct device *dev;
+ struct platform_device *pdev;
+ struct gpmi_nand_platform_data *pdata;
+
+ /* Resources */
+ struct resources resources;
+
+ /* Flash Hardware */
+ struct nand_timing timing;
+
+ /* BCH */
+ struct bch_geometry bch_geometry;
+ struct completion bch_done;
+
+ /* NAND Boot issue */
+ bool swap_block_mark;
+ struct boot_rom_geometry rom_geometry;
+
+ /* MTD / NAND */
+ struct nand_chip nand;
+ struct mtd_info mtd;
+
+ /* General-use Variables */
+ int current_chip;
+ unsigned int command_length;
+
+ /* passed from upper layer */
+ uint8_t *upper_buf;
+ int upper_len;
+
+ /* for DMA operations */
+ bool direct_dma_map_ok;
+
+ struct scatterlist cmd_sgl;
+ char *cmd_buffer;
+
+ struct scatterlist data_sgl;
+ char *data_buffer_dma;
+
+ void *page_buffer_virt;
+ dma_addr_t page_buffer_phys;
+ unsigned int page_buffer_size;
+
+ void *payload_virt;
+ dma_addr_t payload_phys;
+
+ void *auxiliary_virt;
+ dma_addr_t auxiliary_phys;
+
+ /* DMA channels */
+#define DMA_CHANS 8
+ struct dma_chan *dma_chans[DMA_CHANS];
+ struct mxs_dma_data dma_data;
+ enum dma_ops_type last_dma_type;
+ enum dma_ops_type dma_type;
+ struct completion dma_done;
+
+ /* private */
+ void *private;
+};
+
+/**
+ * struct gpmi_nfc_hardware_timing - GPMI hardware timing parameters.
+ * @data_setup_in_cycles: The data setup time, in cycles.
+ * @data_hold_in_cycles: The data hold time, in cycles.
+ * @address_setup_in_cycles: The address setup time, in cycles.
+ * @use_half_periods: Indicates the clock is running slowly, so the
+ * NFC DLL should use half-periods.
+ * @sample_delay_factor: The sample delay factor.
+ */
+struct gpmi_nfc_hardware_timing {
+ uint8_t data_setup_in_cycles;
+ uint8_t data_hold_in_cycles;
+ uint8_t address_setup_in_cycles;
+ bool use_half_periods;
+ uint8_t sample_delay_factor;
+};
+
+/**
+ * struct timing_threshod - Timing threshold
+ * @max_data_setup_cycles: The maximum number of data setup cycles that
+ * can be expressed in the hardware.
+ * @internal_data_setup_in_ns: The time, in ns, that the NFC hardware requires
+ * for data read internal setup. In the Reference
+ * Manual, see the chapter "High-Speed NAND
+ * Timing" for more details.
+ * @max_sample_delay_factor: The maximum sample delay factor that can be
+ * expressed in the hardware.
+ * @max_dll_clock_period_in_ns: The maximum period of the GPMI clock that the
+ * sample delay DLL hardware can possibly work
+ * with (the DLL is unusable with longer periods).
+ * If the full-cycle period is greater than HALF
+ * this value, the DLL must be configured to use
+ * half-periods.
+ * @max_dll_delay_in_ns: The maximum amount of delay, in ns, that the
+ * DLL can implement.
+ * @clock_frequency_in_hz: The clock frequency, in Hz, during the current
+ * I/O transaction. If no I/O transaction is in
+ * progress, this is the clock frequency during
+ * the most recent I/O transaction.
+ */
+struct timing_threshod {
+ const unsigned int max_chip_count;
+ const unsigned int max_data_setup_cycles;
+ const unsigned int internal_data_setup_in_ns;
+ const unsigned int max_sample_delay_factor;
+ const unsigned int max_dll_clock_period_in_ns;
+ const unsigned int max_dll_delay_in_ns;
+ unsigned long clock_frequency_in_hz;
+
+};
+
+/* Common Services */
+extern int common_nfc_set_geometry(struct gpmi_nand_data *);
+extern struct dma_chan *get_dma_chan(struct gpmi_nand_data *);
+extern void prepare_data_dma(struct gpmi_nand_data *,
+ enum dma_data_direction dr);
+extern int start_dma_without_bch_irq(struct gpmi_nand_data *,
+ struct dma_async_tx_descriptor *);
+extern int start_dma_with_bch_irq(struct gpmi_nand_data *,
+ struct dma_async_tx_descriptor *);
+
+/* GPMI-NAND helper function library */
+extern int gpmi_init(struct gpmi_nand_data *);
+extern void gpmi_clear_bch(struct gpmi_nand_data *);
+extern void gpmi_dump_info(struct gpmi_nand_data *);
+extern int bch_set_geometry(struct gpmi_nand_data *);
+extern int gpmi_is_ready(struct gpmi_nand_data *, unsigned chip);
+extern int gpmi_send_command(struct gpmi_nand_data *);
+extern void gpmi_begin(struct gpmi_nand_data *);
+extern void gpmi_end(struct gpmi_nand_data *);
+extern int gpmi_read_data(struct gpmi_nand_data *);
+extern int gpmi_send_data(struct gpmi_nand_data *);
+extern int gpmi_send_page(struct gpmi_nand_data *,
+ dma_addr_t payload, dma_addr_t auxiliary);
+extern int gpmi_read_page(struct gpmi_nand_data *,
+ dma_addr_t payload, dma_addr_t auxiliary);
+
+/* BCH : Status Block Completion Codes */
+#define STATUS_GOOD 0x00
+#define STATUS_ERASED 0xff
+#define STATUS_UNCORRECTABLE 0xfe
+
+/* Use the platform_id to distinguish different Archs. */
+#define IS_MX23 0x1
+#define IS_MX28 0x2
+#define GPMI_IS_MX23(x) ((x)->pdev->id_entry->driver_data == IS_MX23)
+#define GPMI_IS_MX28(x) ((x)->pdev->id_entry->driver_data == IS_MX28)
+#endif
--- /dev/null
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ * Copyright 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef __GPMI_NAND_GPMI_REGS_H
+#define __GPMI_NAND_GPMI_REGS_H
+
+#define HW_GPMI_CTRL0 0x00000000
+#define HW_GPMI_CTRL0_SET 0x00000004
+#define HW_GPMI_CTRL0_CLR 0x00000008
+#define HW_GPMI_CTRL0_TOG 0x0000000c
+
+#define BP_GPMI_CTRL0_COMMAND_MODE 24
+#define BM_GPMI_CTRL0_COMMAND_MODE (3 << BP_GPMI_CTRL0_COMMAND_MODE)
+#define BF_GPMI_CTRL0_COMMAND_MODE(v) \
+ (((v) << BP_GPMI_CTRL0_COMMAND_MODE) & BM_GPMI_CTRL0_COMMAND_MODE)
+#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE 0x0
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ 0x1
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE 0x2
+#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY 0x3
+
+#define BM_GPMI_CTRL0_WORD_LENGTH (1 << 23)
+#define BV_GPMI_CTRL0_WORD_LENGTH__16_BIT 0x0
+#define BV_GPMI_CTRL0_WORD_LENGTH__8_BIT 0x1
+
+/*
+ * Difference in LOCK_CS between imx23 and imx28 :
+ * This bit may impact the _POWER_ consumption. So some chips
+ * do not set it.
+ */
+#define MX23_BP_GPMI_CTRL0_LOCK_CS 22
+#define MX28_BP_GPMI_CTRL0_LOCK_CS 27
+#define LOCK_CS_ENABLE 0x1
+#define BF_GPMI_CTRL0_LOCK_CS(v, x) 0x0
+
+/* Difference in CS between imx23 and imx28 */
+#define BP_GPMI_CTRL0_CS 20
+#define MX23_BM_GPMI_CTRL0_CS (3 << BP_GPMI_CTRL0_CS)
+#define MX28_BM_GPMI_CTRL0_CS (7 << BP_GPMI_CTRL0_CS)
+#define BF_GPMI_CTRL0_CS(v, x) (((v) << BP_GPMI_CTRL0_CS) & \
+ (GPMI_IS_MX23((x)) \
+ ? MX23_BM_GPMI_CTRL0_CS \
+ : MX28_BM_GPMI_CTRL0_CS))
+
+#define BP_GPMI_CTRL0_ADDRESS 17
+#define BM_GPMI_CTRL0_ADDRESS (3 << BP_GPMI_CTRL0_ADDRESS)
+#define BF_GPMI_CTRL0_ADDRESS(v) \
+ (((v) << BP_GPMI_CTRL0_ADDRESS) & BM_GPMI_CTRL0_ADDRESS)
+#define BV_GPMI_CTRL0_ADDRESS__NAND_DATA 0x0
+#define BV_GPMI_CTRL0_ADDRESS__NAND_CLE 0x1
+#define BV_GPMI_CTRL0_ADDRESS__NAND_ALE 0x2
+
+#define BM_GPMI_CTRL0_ADDRESS_INCREMENT (1 << 16)
+#define BV_GPMI_CTRL0_ADDRESS_INCREMENT__DISABLED 0x0
+#define BV_GPMI_CTRL0_ADDRESS_INCREMENT__ENABLED 0x1
+
+#define BP_GPMI_CTRL0_XFER_COUNT 0
+#define BM_GPMI_CTRL0_XFER_COUNT (0xffff << BP_GPMI_CTRL0_XFER_COUNT)
+#define BF_GPMI_CTRL0_XFER_COUNT(v) \
+ (((v) << BP_GPMI_CTRL0_XFER_COUNT) & BM_GPMI_CTRL0_XFER_COUNT)
+
+#define HW_GPMI_COMPARE 0x00000010
+
+#define HW_GPMI_ECCCTRL 0x00000020
+#define HW_GPMI_ECCCTRL_SET 0x00000024
+#define HW_GPMI_ECCCTRL_CLR 0x00000028
+#define HW_GPMI_ECCCTRL_TOG 0x0000002c
+
+#define BP_GPMI_ECCCTRL_ECC_CMD 13
+#define BM_GPMI_ECCCTRL_ECC_CMD (3 << BP_GPMI_ECCCTRL_ECC_CMD)
+#define BF_GPMI_ECCCTRL_ECC_CMD(v) \
+ (((v) << BP_GPMI_ECCCTRL_ECC_CMD) & BM_GPMI_ECCCTRL_ECC_CMD)
+#define BV_GPMI_ECCCTRL_ECC_CMD__BCH_DECODE 0x0
+#define BV_GPMI_ECCCTRL_ECC_CMD__BCH_ENCODE 0x1
+
+#define BM_GPMI_ECCCTRL_ENABLE_ECC (1 << 12)
+#define BV_GPMI_ECCCTRL_ENABLE_ECC__ENABLE 0x1
+#define BV_GPMI_ECCCTRL_ENABLE_ECC__DISABLE 0x0
+
+#define BP_GPMI_ECCCTRL_BUFFER_MASK 0
+#define BM_GPMI_ECCCTRL_BUFFER_MASK (0x1ff << BP_GPMI_ECCCTRL_BUFFER_MASK)
+#define BF_GPMI_ECCCTRL_BUFFER_MASK(v) \
+ (((v) << BP_GPMI_ECCCTRL_BUFFER_MASK) & BM_GPMI_ECCCTRL_BUFFER_MASK)
+#define BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY 0x100
+#define BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE 0x1FF
+
+#define HW_GPMI_ECCCOUNT 0x00000030
+#define HW_GPMI_PAYLOAD 0x00000040
+#define HW_GPMI_AUXILIARY 0x00000050
+#define HW_GPMI_CTRL1 0x00000060
+#define HW_GPMI_CTRL1_SET 0x00000064
+#define HW_GPMI_CTRL1_CLR 0x00000068
+#define HW_GPMI_CTRL1_TOG 0x0000006c
+
+#define BM_GPMI_CTRL1_BCH_MODE (1 << 18)
+
+#define BP_GPMI_CTRL1_DLL_ENABLE 17
+#define BM_GPMI_CTRL1_DLL_ENABLE (1 << BP_GPMI_CTRL1_DLL_ENABLE)
+
+#define BP_GPMI_CTRL1_HALF_PERIOD 16
+#define BM_GPMI_CTRL1_HALF_PERIOD (1 << BP_GPMI_CTRL1_HALF_PERIOD)
+
+#define BP_GPMI_CTRL1_RDN_DELAY 12
+#define BM_GPMI_CTRL1_RDN_DELAY (0xf << BP_GPMI_CTRL1_RDN_DELAY)
+#define BF_GPMI_CTRL1_RDN_DELAY(v) \
+ (((v) << BP_GPMI_CTRL1_RDN_DELAY) & BM_GPMI_CTRL1_RDN_DELAY)
+
+#define BM_GPMI_CTRL1_DEV_RESET (1 << 3)
+#define BV_GPMI_CTRL1_DEV_RESET__ENABLED 0x0
+#define BV_GPMI_CTRL1_DEV_RESET__DISABLED 0x1
+
+#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY (1 << 2)
+#define BV_GPMI_CTRL1_ATA_IRQRDY_POLARITY__ACTIVELOW 0x0
+#define BV_GPMI_CTRL1_ATA_IRQRDY_POLARITY__ACTIVEHIGH 0x1
+
+#define BM_GPMI_CTRL1_CAMERA_MODE (1 << 1)
+#define BV_GPMI_CTRL1_GPMI_MODE__NAND 0x0
+#define BV_GPMI_CTRL1_GPMI_MODE__ATA 0x1
+
+#define BM_GPMI_CTRL1_GPMI_MODE (1 << 0)
+
+#define HW_GPMI_TIMING0 0x00000070
+
+#define BP_GPMI_TIMING0_ADDRESS_SETUP 16
+#define BM_GPMI_TIMING0_ADDRESS_SETUP (0xff << BP_GPMI_TIMING0_ADDRESS_SETUP)
+#define BF_GPMI_TIMING0_ADDRESS_SETUP(v) \
+ (((v) << BP_GPMI_TIMING0_ADDRESS_SETUP) & BM_GPMI_TIMING0_ADDRESS_SETUP)
+
+#define BP_GPMI_TIMING0_DATA_HOLD 8
+#define BM_GPMI_TIMING0_DATA_HOLD (0xff << BP_GPMI_TIMING0_DATA_HOLD)
+#define BF_GPMI_TIMING0_DATA_HOLD(v) \
+ (((v) << BP_GPMI_TIMING0_DATA_HOLD) & BM_GPMI_TIMING0_DATA_HOLD)
+
+#define BP_GPMI_TIMING0_DATA_SETUP 0
+#define BM_GPMI_TIMING0_DATA_SETUP (0xff << BP_GPMI_TIMING0_DATA_SETUP)
+#define BF_GPMI_TIMING0_DATA_SETUP(v) \
+ (((v) << BP_GPMI_TIMING0_DATA_SETUP) & BM_GPMI_TIMING0_DATA_SETUP)
+
+#define HW_GPMI_TIMING1 0x00000080
+#define BP_GPMI_TIMING1_BUSY_TIMEOUT 16
+
+#define HW_GPMI_TIMING2 0x00000090
+#define HW_GPMI_DATA 0x000000a0
+
+/* MX28 uses this to detect READY. */
+#define HW_GPMI_STAT 0x000000b0
+#define MX28_BP_GPMI_STAT_READY_BUSY 24
+#define MX28_BM_GPMI_STAT_READY_BUSY (0xff << MX28_BP_GPMI_STAT_READY_BUSY)
+#define MX28_BF_GPMI_STAT_READY_BUSY(v) \
+ (((v) << MX28_BP_GPMI_STAT_READY_BUSY) & MX28_BM_GPMI_STAT_READY_BUSY)
+
+/* MX23 uses this to detect READY. */
+#define HW_GPMI_DEBUG 0x000000c0
+#define MX23_BP_GPMI_DEBUG_READY0 28
+#define MX23_BM_GPMI_DEBUG_READY0 (1 << MX23_BP_GPMI_DEBUG_READY0)
+#endif
static int __init h1910_init(void)
{
struct nand_chip *this;
- const char *part_type = 0;
- int mtd_parts_nb = 0;
- struct mtd_partition *mtd_parts = 0;
void __iomem *nandaddr;
if (!machine_is_h1900())
iounmap((void *)nandaddr);
return -ENXIO;
}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
- mtd_parts_nb = parse_cmdline_partitions(h1910_nand_mtd, &mtd_parts, "h1910-nand");
- if (mtd_parts_nb > 0)
- part_type = "command line";
- else
- mtd_parts_nb = 0;
-#endif
- if (mtd_parts_nb == 0) {
- mtd_parts = partition_info;
- mtd_parts_nb = NUM_PARTITIONS;
- part_type = "static";
- }
/* Register the partitions */
- printk(KERN_NOTICE "Using %s partition definition\n", part_type);
- mtd_device_register(h1910_nand_mtd, mtd_parts, mtd_parts_nb);
+ mtd_device_parse_register(h1910_nand_mtd, NULL, 0,
+ partition_info, NUM_PARTITIONS);
/* Return happy */
return 0;
return 0;
}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-static const char *part_probes[] = {"cmdline", NULL};
-#endif
-
static int jz_nand_ioremap_resource(struct platform_device *pdev,
const char *name, struct resource **res, void __iomem **base)
{
struct nand_chip *chip;
struct mtd_info *mtd;
struct jz_nand_platform_data *pdata = pdev->dev.platform_data;
- struct mtd_partition *partition_info;
- int num_partitions = 0;
nand = kzalloc(sizeof(*nand), GFP_KERNEL);
if (!nand) {
goto err_gpio_free;
}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
- num_partitions = parse_mtd_partitions(mtd, part_probes,
- &partition_info, 0);
-#endif
- if (num_partitions <= 0 && pdata) {
- num_partitions = pdata->num_partitions;
- partition_info = pdata->partitions;
- }
- ret = mtd_device_register(mtd, partition_info, num_partitions);
+ ret = mtd_device_parse_register(mtd, NULL, 0,
+ pdata ? pdata->partitions : NULL,
+ pdata ? pdata->num_partitions : 0);
if (ret) {
dev_err(&pdev->dev, "Failed to add mtd device\n");
static void mpc5121_nfc_done(struct mtd_info *mtd);
-static const char *mpc5121_nfc_pprobes[] = { "cmdlinepart", NULL };
-
/* Read NFC register */
static inline u16 nfc_read(struct mtd_info *mtd, uint reg)
{
struct mpc5121_nfc_prv *prv;
struct resource res;
struct mtd_info *mtd;
- struct mtd_partition *parts;
struct nand_chip *chip;
unsigned long regs_paddr, regs_size;
const __be32 *chips_no;
int resettime = 0;
int retval = 0;
int rev, len;
+ struct mtd_part_parser_data ppdata;
/*
* Check SoC revision. This driver supports only NFC
}
mtd->name = "MPC5121 NAND";
+ ppdata.of_node = dn;
chip->dev_ready = mpc5121_nfc_dev_ready;
chip->cmdfunc = mpc5121_nfc_command;
chip->read_byte = mpc5121_nfc_read_byte;
chip->write_buf = mpc5121_nfc_write_buf;
chip->verify_buf = mpc5121_nfc_verify_buf;
chip->select_chip = mpc5121_nfc_select_chip;
- chip->options = NAND_NO_AUTOINCR | NAND_USE_FLASH_BBT;
+ chip->options = NAND_NO_AUTOINCR;
+ chip->bbt_options = NAND_BBT_USE_FLASH;
chip->ecc.mode = NAND_ECC_SOFT;
/* Support external chip-select logic on ADS5121 board */
dev_set_drvdata(dev, mtd);
/* Register device in MTD */
- retval = parse_mtd_partitions(mtd, mpc5121_nfc_pprobes, &parts, 0);
-#ifdef CONFIG_MTD_OF_PARTS
- if (retval == 0)
- retval = of_mtd_parse_partitions(dev, dn, &parts);
-#endif
- if (retval < 0) {
- dev_err(dev, "Error parsing MTD partitions!\n");
- devm_free_irq(dev, prv->irq, mtd);
- retval = -EINVAL;
- goto error;
- }
-
- retval = mtd_device_register(mtd, parts, retval);
+ retval = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
if (retval) {
dev_err(dev, "Error adding MTD device!\n");
devm_free_irq(dev, prv->irq, mtd);
#define nfc_is_v21() (cpu_is_mx25() || cpu_is_mx35())
#define nfc_is_v1() (cpu_is_mx31() || cpu_is_mx27() || cpu_is_mx21())
-#define nfc_is_v3_2() cpu_is_mx51()
+#define nfc_is_v3_2() (cpu_is_mx51() || cpu_is_mx53())
#define nfc_is_v3() nfc_is_v3_2()
/* Addresses for NFC registers */
struct mxc_nand_host {
struct mtd_info mtd;
struct nand_chip nand;
- struct mtd_partition *parts;
struct device *dev;
void *spare0;
udelay(1);
}
if (max_retries < 0)
- DEBUG(MTD_DEBUG_LEVEL0, "%s: INT not set\n",
- __func__);
+ pr_debug("%s: INT not set\n", __func__);
}
}
* waits for completion. */
static void send_cmd_v1_v2(struct mxc_nand_host *host, uint16_t cmd, int useirq)
{
- DEBUG(MTD_DEBUG_LEVEL3, "send_cmd(host, 0x%x, %d)\n", cmd, useirq);
+ pr_debug("send_cmd(host, 0x%x, %d)\n", cmd, useirq);
writew(cmd, NFC_V1_V2_FLASH_CMD);
writew(NFC_CMD, NFC_V1_V2_CONFIG2);
udelay(1);
}
if (max_retries < 0)
- DEBUG(MTD_DEBUG_LEVEL0, "%s: RESET failed\n",
- __func__);
+ pr_debug("%s: RESET failed\n", __func__);
} else {
/* Wait for operation to complete */
wait_op_done(host, useirq);
* a NAND command. */
static void send_addr_v1_v2(struct mxc_nand_host *host, uint16_t addr, int islast)
{
- DEBUG(MTD_DEBUG_LEVEL3, "send_addr(host, 0x%x %d)\n", addr, islast);
+ pr_debug("send_addr(host, 0x%x %d)\n", addr, islast);
writew(addr, NFC_V1_V2_FLASH_ADDR);
writew(NFC_ADDR, NFC_V1_V2_CONFIG2);
uint16_t ecc_status = readw(NFC_V1_V2_ECC_STATUS_RESULT);
if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) {
- DEBUG(MTD_DEBUG_LEVEL0,
- "MXC_NAND: HWECC uncorrectable 2-bit ECC error\n");
+ pr_debug("MXC_NAND: HWECC uncorrectable 2-bit ECC error\n");
return -1;
}
writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR3);
} else if (nfc_is_v1()) {
writew(0x0, NFC_V1_UNLOCKSTART_BLKADDR);
- writew(0x4000, NFC_V1_UNLOCKEND_BLKADDR);
+ writew(0xffff, NFC_V1_UNLOCKEND_BLKADDR);
} else
BUG();
struct nand_chip *nand_chip = mtd->priv;
struct mxc_nand_host *host = nand_chip->priv;
- DEBUG(MTD_DEBUG_LEVEL3,
- "mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
+ pr_debug("mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
command, column, page_addr);
/* Reset command state information */
struct mxc_nand_platform_data *pdata = pdev->dev.platform_data;
struct mxc_nand_host *host;
struct resource *res;
- int err = 0, __maybe_unused nr_parts = 0;
+ int err = 0;
struct nand_ecclayout *oob_smallpage, *oob_largepage;
/* Allocate memory for MTD device structure and private data */
this->bbt_td = &bbt_main_descr;
this->bbt_md = &bbt_mirror_descr;
/* update flash based bbt */
- this->options |= NAND_USE_FLASH_BBT;
+ this->bbt_options |= NAND_BBT_USE_FLASH;
}
init_completion(&host->op_completion);
}
/* Register the partitions */
- nr_parts =
- parse_mtd_partitions(mtd, part_probes, &host->parts, 0);
- if (nr_parts > 0)
- mtd_device_register(mtd, host->parts, nr_parts);
- else if (pdata->parts)
- mtd_device_register(mtd, pdata->parts, pdata->nr_parts);
- else {
- pr_info("Registering %s as whole device\n", mtd->name);
- mtd_device_register(mtd, NULL, 0);
- }
+ mtd_device_parse_register(mtd, part_probes, 0,
+ pdata->parts, pdata->nr_parts);
platform_set_drvdata(pdev, host);
* TODO:
* Enable cached programming for 2k page size chips
* Check, if mtd->ecctype should be set to MTD_ECC_HW
- * if we have HW ecc support.
+ * if we have HW ECC support.
* The AG-AND chips have nice features for speed improvement,
* which are not supported yet. Read / program 4 pages in one go.
* BBT table is not serialized, has to be fixed
/* Start address must align on block boundary */
if (ofs & ((1 << chip->phys_erase_shift) - 1)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Unaligned address\n", __func__);
+ pr_debug("%s: unaligned address\n", __func__);
ret = -EINVAL;
}
/* Length must align on block boundary */
if (len & ((1 << chip->phys_erase_shift) - 1)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Length not block aligned\n",
- __func__);
+ pr_debug("%s: length not block aligned\n", __func__);
ret = -EINVAL;
}
/* Do not allow past end of device */
if (ofs + len > mtd->size) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Past end of device\n",
- __func__);
+ pr_debug("%s: past end of device\n", __func__);
ret = -EINVAL;
}
/**
* nand_release_device - [GENERIC] release chip
- * @mtd: MTD device structure
+ * @mtd: MTD device structure
*
- * Deselect, release chip lock and wake up anyone waiting on the device
+ * Deselect, release chip lock and wake up anyone waiting on the device.
*/
static void nand_release_device(struct mtd_info *mtd)
{
/**
* nand_read_byte - [DEFAULT] read one byte from the chip
- * @mtd: MTD device structure
+ * @mtd: MTD device structure
*
- * Default read function for 8bit buswith
+ * Default read function for 8bit buswidth
*/
static uint8_t nand_read_byte(struct mtd_info *mtd)
{
/**
* nand_read_byte16 - [DEFAULT] read one byte endianess aware from the chip
- * @mtd: MTD device structure
+ * nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip
+ * @mtd: MTD device structure
+ *
+ * Default read function for 16bit buswidth with endianness conversion.
*
- * Default read function for 16bit buswith with
- * endianess conversion
*/
static uint8_t nand_read_byte16(struct mtd_info *mtd)
{
/**
* nand_read_word - [DEFAULT] read one word from the chip
- * @mtd: MTD device structure
+ * @mtd: MTD device structure
*
- * Default read function for 16bit buswith without
- * endianess conversion
+ * Default read function for 16bit buswidth without endianness conversion.
*/
static u16 nand_read_word(struct mtd_info *mtd)
{
/**
* nand_select_chip - [DEFAULT] control CE line
- * @mtd: MTD device structure
- * @chipnr: chipnumber to select, -1 for deselect
+ * @mtd: MTD device structure
+ * @chipnr: chipnumber to select, -1 for deselect
*
* Default select function for 1 chip devices.
*/
/**
* nand_write_buf - [DEFAULT] write buffer to chip
- * @mtd: MTD device structure
- * @buf: data buffer
- * @len: number of bytes to write
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
*
- * Default write function for 8bit buswith
+ * Default write function for 8bit buswidth.
*/
static void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
{
/**
* nand_read_buf - [DEFAULT] read chip data into buffer
- * @mtd: MTD device structure
- * @buf: buffer to store date
- * @len: number of bytes to read
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
*
- * Default read function for 8bit buswith
+ * Default read function for 8bit buswidth.
*/
static void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
{
/**
* nand_verify_buf - [DEFAULT] Verify chip data against buffer
- * @mtd: MTD device structure
- * @buf: buffer containing the data to compare
- * @len: number of bytes to compare
+ * @mtd: MTD device structure
+ * @buf: buffer containing the data to compare
+ * @len: number of bytes to compare
*
- * Default verify function for 8bit buswith
+ * Default verify function for 8bit buswidth.
*/
static int nand_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
{
/**
* nand_write_buf16 - [DEFAULT] write buffer to chip
- * @mtd: MTD device structure
- * @buf: data buffer
- * @len: number of bytes to write
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
*
- * Default write function for 16bit buswith
+ * Default write function for 16bit buswidth.
*/
static void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
{
/**
* nand_read_buf16 - [DEFAULT] read chip data into buffer
- * @mtd: MTD device structure
- * @buf: buffer to store date
- * @len: number of bytes to read
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
*
- * Default read function for 16bit buswith
+ * Default read function for 16bit buswidth.
*/
static void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
{
/**
* nand_verify_buf16 - [DEFAULT] Verify chip data against buffer
- * @mtd: MTD device structure
- * @buf: buffer containing the data to compare
- * @len: number of bytes to compare
+ * @mtd: MTD device structure
+ * @buf: buffer containing the data to compare
+ * @len: number of bytes to compare
*
- * Default verify function for 16bit buswith
+ * Default verify function for 16bit buswidth.
*/
static int nand_verify_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
{
/**
* nand_block_bad - [DEFAULT] Read bad block marker from the chip
- * @mtd: MTD device structure
- * @ofs: offset from device start
- * @getchip: 0, if the chip is already selected
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
+ * @getchip: 0, if the chip is already selected
*
* Check, if the block is bad.
*/
struct nand_chip *chip = mtd->priv;
u16 bad;
- if (chip->options & NAND_BBT_SCANLASTPAGE)
+ if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
ofs += mtd->erasesize - mtd->writesize;
page = (int)(ofs >> chip->page_shift) & chip->pagemask;
/**
* nand_default_block_markbad - [DEFAULT] mark a block bad
- * @mtd: MTD device structure
- * @ofs: offset from device start
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
*
- * This is the default implementation, which can be overridden by
- * a hardware specific driver.
+ * This is the default implementation, which can be overridden by a hardware
+ * specific driver.
*/
static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
{
uint8_t buf[2] = { 0, 0 };
int block, ret, i = 0;
- if (chip->options & NAND_BBT_SCANLASTPAGE)
+ if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
ofs += mtd->erasesize - mtd->writesize;
/* Get block number */
if (chip->bbt)
chip->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
- /* Do we have a flash based bad block table ? */
- if (chip->options & NAND_USE_FLASH_BBT)
+ /* Do we have a flash based bad block table? */
+ if (chip->bbt_options & NAND_BBT_USE_FLASH)
ret = nand_update_bbt(mtd, ofs);
else {
+ struct mtd_oob_ops ops;
+
nand_get_device(chip, mtd, FL_WRITING);
- /* Write to first two pages and to byte 1 and 6 if necessary.
- * If we write to more than one location, the first error
- * encountered quits the procedure. We write two bytes per
- * location, so we dont have to mess with 16 bit access.
+ /*
+ * Write to first two pages if necessary. If we write to more
+ * than one location, the first error encountered quits the
+ * procedure. We write two bytes per location, so we dont have
+ * to mess with 16 bit access.
*/
+ ops.len = ops.ooblen = 2;
+ ops.datbuf = NULL;
+ ops.oobbuf = buf;
+ ops.ooboffs = chip->badblockpos & ~0x01;
+ ops.mode = MTD_OPS_PLACE_OOB;
do {
- chip->ops.len = chip->ops.ooblen = 2;
- chip->ops.datbuf = NULL;
- chip->ops.oobbuf = buf;
- chip->ops.ooboffs = chip->badblockpos & ~0x01;
-
- ret = nand_do_write_oob(mtd, ofs, &chip->ops);
+ ret = nand_do_write_oob(mtd, ofs, &ops);
- if (!ret && (chip->options & NAND_BBT_SCANBYTE1AND6)) {
- chip->ops.ooboffs = NAND_SMALL_BADBLOCK_POS
- & ~0x01;
- ret = nand_do_write_oob(mtd, ofs, &chip->ops);
- }
i++;
ofs += mtd->writesize;
- } while (!ret && (chip->options & NAND_BBT_SCAN2NDPAGE) &&
+ } while (!ret && (chip->bbt_options & NAND_BBT_SCAN2NDPAGE) &&
i < 2);
nand_release_device(mtd);
/**
* nand_check_wp - [GENERIC] check if the chip is write protected
- * @mtd: MTD device structure
- * Check, if the device is write protected
+ * @mtd: MTD device structure
*
- * The function expects, that the device is already selected
+ * Check, if the device is write protected. The function expects, that the
+ * device is already selected.
*/
static int nand_check_wp(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
- /* broken xD cards report WP despite being writable */
+ /* Broken xD cards report WP despite being writable */
if (chip->options & NAND_BROKEN_XD)
return 0;
/**
* nand_block_checkbad - [GENERIC] Check if a block is marked bad
- * @mtd: MTD device structure
- * @ofs: offset from device start
- * @getchip: 0, if the chip is already selected
- * @allowbbt: 1, if its allowed to access the bbt area
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
+ * @getchip: 0, if the chip is already selected
+ * @allowbbt: 1, if its allowed to access the bbt area
*
* Check, if the block is bad. Either by reading the bad block table or
* calling of the scan function.
/**
* panic_nand_wait_ready - [GENERIC] Wait for the ready pin after commands.
- * @mtd: MTD device structure
- * @timeo: Timeout
+ * @mtd: MTD device structure
+ * @timeo: Timeout
*
* Helper function for nand_wait_ready used when needing to wait in interrupt
* context.
}
}
-/*
- * Wait for the ready pin, after a command
- * The timeout is catched later.
- */
+/* Wait for the ready pin, after a command. The timeout is caught later. */
void nand_wait_ready(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
return panic_nand_wait_ready(mtd, 400);
led_trigger_event(nand_led_trigger, LED_FULL);
- /* wait until command is processed or timeout occures */
+ /* Wait until command is processed or timeout occurs */
do {
if (chip->dev_ready(mtd))
break;
/**
* nand_command - [DEFAULT] Send command to NAND device
- * @mtd: MTD device structure
- * @command: the command to be sent
- * @column: the column address for this command, -1 if none
- * @page_addr: the page address for this command, -1 if none
+ * @mtd: MTD device structure
+ * @command: the command to be sent
+ * @column: the column address for this command, -1 if none
+ * @page_addr: the page address for this command, -1 if none
*
- * Send command to NAND device. This function is used for small page
- * devices (256/512 Bytes per page)
+ * Send command to NAND device. This function is used for small page devices
+ * (256/512 Bytes per page).
*/
static void nand_command(struct mtd_info *mtd, unsigned int command,
int column, int page_addr)
register struct nand_chip *chip = mtd->priv;
int ctrl = NAND_CTRL_CLE | NAND_CTRL_CHANGE;
- /*
- * Write out the command to the device.
- */
+ /* Write out the command to the device */
if (command == NAND_CMD_SEQIN) {
int readcmd;
}
chip->cmd_ctrl(mtd, command, ctrl);
- /*
- * Address cycle, when necessary
- */
+ /* Address cycle, when necessary */
ctrl = NAND_CTRL_ALE | NAND_CTRL_CHANGE;
/* Serially input address */
if (column != -1) {
chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
/*
- * program and erase have their own busy handlers
- * status and sequential in needs no delay
+ * Program and erase have their own busy handlers status and sequential
+ * in needs no delay
*/
switch (command) {
return;
}
}
- /* Apply this short delay always to ensure that we do wait tWB in
- * any case on any machine. */
+ /*
+ * Apply this short delay always to ensure that we do wait tWB in
+ * any case on any machine.
+ */
ndelay(100);
nand_wait_ready(mtd);
/**
* nand_command_lp - [DEFAULT] Send command to NAND large page device
- * @mtd: MTD device structure
- * @command: the command to be sent
- * @column: the column address for this command, -1 if none
- * @page_addr: the page address for this command, -1 if none
+ * @mtd: MTD device structure
+ * @command: the command to be sent
+ * @column: the column address for this command, -1 if none
+ * @page_addr: the page address for this command, -1 if none
*
* Send command to NAND device. This is the version for the new large page
- * devices We dont have the separate regions as we have in the small page
- * devices. We must emulate NAND_CMD_READOOB to keep the code compatible.
+ * devices. We don't have the separate regions as we have in the small page
+ * devices. We must emulate NAND_CMD_READOOB to keep the code compatible.
*/
static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
int column, int page_addr)
chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
/*
- * program and erase have their own busy handlers
- * status, sequential in, and deplete1 need no delay
+ * Program and erase have their own busy handlers status, sequential
+ * in, and deplete1 need no delay.
*/
switch (command) {
case NAND_CMD_DEPLETE1:
return;
- /*
- * read error status commands require only a short delay
- */
case NAND_CMD_STATUS_ERROR:
case NAND_CMD_STATUS_ERROR0:
case NAND_CMD_STATUS_ERROR1:
case NAND_CMD_STATUS_ERROR2:
case NAND_CMD_STATUS_ERROR3:
+ /* Read error status commands require only a short delay */
udelay(chip->chip_delay);
return;
default:
/*
* If we don't have access to the busy pin, we apply the given
- * command delay
+ * command delay.
*/
if (!chip->dev_ready) {
udelay(chip->chip_delay);
}
}
- /* Apply this short delay always to ensure that we do wait tWB in
- * any case on any machine. */
+ /*
+ * Apply this short delay always to ensure that we do wait tWB in
+ * any case on any machine.
+ */
ndelay(100);
nand_wait_ready(mtd);
/**
* panic_nand_get_device - [GENERIC] Get chip for selected access
- * @chip: the nand chip descriptor
- * @mtd: MTD device structure
- * @new_state: the state which is requested
+ * @chip: the nand chip descriptor
+ * @mtd: MTD device structure
+ * @new_state: the state which is requested
*
* Used when in panic, no locks are taken.
*/
static void panic_nand_get_device(struct nand_chip *chip,
struct mtd_info *mtd, int new_state)
{
- /* Hardware controller shared among independend devices */
+ /* Hardware controller shared among independent devices */
chip->controller->active = chip;
chip->state = new_state;
}
/**
* nand_get_device - [GENERIC] Get chip for selected access
- * @chip: the nand chip descriptor
- * @mtd: MTD device structure
- * @new_state: the state which is requested
+ * @chip: the nand chip descriptor
+ * @mtd: MTD device structure
+ * @new_state: the state which is requested
*
* Get the device and lock it for exclusive access
*/
}
/**
- * panic_nand_wait - [GENERIC] wait until the command is done
- * @mtd: MTD device structure
- * @chip: NAND chip structure
- * @timeo: Timeout
+ * panic_nand_wait - [GENERIC] wait until the command is done
+ * @mtd: MTD device structure
+ * @chip: NAND chip structure
+ * @timeo: timeout
*
* Wait for command done. This is a helper function for nand_wait used when
* we are in interrupt context. May happen when in panic and trying to write
}
/**
- * nand_wait - [DEFAULT] wait until the command is done
- * @mtd: MTD device structure
- * @chip: NAND chip structure
+ * nand_wait - [DEFAULT] wait until the command is done
+ * @mtd: MTD device structure
+ * @chip: NAND chip structure
*
- * Wait for command done. This applies to erase and program only
- * Erase can take up to 400ms and program up to 20ms according to
- * general NAND and SmartMedia specs
+ * Wait for command done. This applies to erase and program only. Erase can
+ * take up to 400ms and program up to 20ms according to general NAND and
+ * SmartMedia specs.
*/
static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
{
led_trigger_event(nand_led_trigger, LED_FULL);
- /* Apply this short delay always to ensure that we do wait tWB in
- * any case on any machine. */
+ /*
+ * Apply this short delay always to ensure that we do wait tWB in any
+ * case on any machine.
+ */
ndelay(100);
if ((state == FL_ERASING) && (chip->options & NAND_IS_AND))
/**
* __nand_unlock - [REPLACEABLE] unlocks specified locked blocks
- *
* @mtd: mtd info
* @ofs: offset to start unlock from
* @len: length to unlock
- * @invert: when = 0, unlock the range of blocks within the lower and
- * upper boundary address
- * when = 1, unlock the range of blocks outside the boundaries
- * of the lower and upper boundary address
+ * @invert: when = 0, unlock the range of blocks within the lower and
+ * upper boundary address
+ * when = 1, unlock the range of blocks outside the boundaries
+ * of the lower and upper boundary address
*
- * return - unlock status
+ * Returs unlock status.
*/
static int __nand_unlock(struct mtd_info *mtd, loff_t ofs,
uint64_t len, int invert)
/* Call wait ready function */
status = chip->waitfunc(mtd, chip);
- udelay(1000);
/* See if device thinks it succeeded */
if (status & 0x01) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Error status = 0x%08x\n",
+ pr_debug("%s: error status = 0x%08x\n",
__func__, status);
ret = -EIO;
}
/**
* nand_unlock - [REPLACEABLE] unlocks specified locked blocks
- *
* @mtd: mtd info
* @ofs: offset to start unlock from
* @len: length to unlock
*
- * return - unlock status
+ * Returns unlock status.
*/
int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
{
int chipnr;
struct nand_chip *chip = mtd->priv;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: start = 0x%012llx, len = %llu\n",
+ pr_debug("%s: start = 0x%012llx, len = %llu\n",
__func__, (unsigned long long)ofs, len);
if (check_offs_len(mtd, ofs, len))
/* Check, if it is write protected */
if (nand_check_wp(mtd)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Device is write protected!!!\n",
+ pr_debug("%s: device is write protected!\n",
__func__);
ret = -EIO;
goto out;
/**
* nand_lock - [REPLACEABLE] locks all blocks present in the device
- *
* @mtd: mtd info
* @ofs: offset to start unlock from
* @len: length to unlock
*
- * return - lock status
+ * This feature is not supported in many NAND parts. 'Micron' NAND parts do
+ * have this feature, but it allows only to lock all blocks, not for specified
+ * range for block. Implementing 'lock' feature by making use of 'unlock', for
+ * now.
*
- * This feature is not supported in many NAND parts. 'Micron' NAND parts
- * do have this feature, but it allows only to lock all blocks, not for
- * specified range for block.
- *
- * Implementing 'lock' feature by making use of 'unlock', for now.
+ * Returns lock status.
*/
int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
{
int chipnr, status, page;
struct nand_chip *chip = mtd->priv;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: start = 0x%012llx, len = %llu\n",
+ pr_debug("%s: start = 0x%012llx, len = %llu\n",
__func__, (unsigned long long)ofs, len);
if (check_offs_len(mtd, ofs, len))
/* Check, if it is write protected */
if (nand_check_wp(mtd)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Device is write protected!!!\n",
+ pr_debug("%s: device is write protected!\n",
__func__);
status = MTD_ERASE_FAILED;
ret = -EIO;
/* Call wait ready function */
status = chip->waitfunc(mtd, chip);
- udelay(1000);
/* See if device thinks it succeeded */
if (status & 0x01) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Error status = 0x%08x\n",
+ pr_debug("%s: error status = 0x%08x\n",
__func__, status);
ret = -EIO;
goto out;
EXPORT_SYMBOL(nand_lock);
/**
- * nand_read_page_raw - [Intern] read raw page data without ecc
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: buffer to store read data
- * @page: page number to read
+ * nand_read_page_raw - [INTERN] read raw page data without ecc
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
*
- * Not for syndrome calculating ecc controllers, which use a special oob layout
+ * Not for syndrome calculating ECC controllers, which use a special oob layout.
*/
static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int page)
}
/**
- * nand_read_page_raw_syndrome - [Intern] read raw page data without ecc
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: buffer to store read data
- * @page: page number to read
+ * nand_read_page_raw_syndrome - [INTERN] read raw page data without ecc
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
*
* We need a special oob layout and handling even when OOB isn't used.
*/
}
/**
- * nand_read_page_swecc - [REPLACABLE] software ecc based page read function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: buffer to store read data
- * @page: page number to read
+ * nand_read_page_swecc - [REPLACEABLE] software ECC based page read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
*/
static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int page)
}
/**
- * nand_read_subpage - [REPLACABLE] software ecc based sub-page read function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @data_offs: offset of requested data within the page
- * @readlen: data length
- * @bufpoi: buffer to store read data
+ * nand_read_subpage - [REPLACEABLE] software ECC based sub-page read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @data_offs: offset of requested data within the page
+ * @readlen: data length
+ * @bufpoi: buffer to store read data
*/
static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi)
int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1;
int index = 0;
- /* Column address wihin the page aligned to ECC size (256bytes). */
+ /* Column address within the page aligned to ECC size (256bytes) */
start_step = data_offs / chip->ecc.size;
end_step = (data_offs + readlen - 1) / chip->ecc.size;
num_steps = end_step - start_step + 1;
- /* Data size aligned to ECC ecc.size*/
+ /* Data size aligned to ECC ecc.size */
datafrag_len = num_steps * chip->ecc.size;
eccfrag_len = num_steps * chip->ecc.bytes;
p = bufpoi + data_col_addr;
chip->read_buf(mtd, p, datafrag_len);
- /* Calculate ECC */
+ /* Calculate ECC */
for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size)
chip->ecc.calculate(mtd, p, &chip->buffers->ecccalc[i]);
- /* The performance is faster if to position offsets
- according to ecc.pos. Let make sure here that
- there are no gaps in ecc positions */
+ /*
+ * The performance is faster if we position offsets according to
+ * ecc.pos. Let's make sure that there are no gaps in ECC positions.
+ */
for (i = 0; i < eccfrag_len - 1; i++) {
if (eccpos[i + start_step * chip->ecc.bytes] + 1 !=
eccpos[i + start_step * chip->ecc.bytes + 1]) {
chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
} else {
- /* send the command to read the particular ecc bytes */
- /* take care about buswidth alignment in read_buf */
+ /*
+ * Send the command to read the particular ECC bytes take care
+ * about buswidth alignment in read_buf.
+ */
index = start_step * chip->ecc.bytes;
aligned_pos = eccpos[index] & ~(busw - 1);
}
/**
- * nand_read_page_hwecc - [REPLACABLE] hardware ecc based page read function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: buffer to store read data
- * @page: page number to read
+ * nand_read_page_hwecc - [REPLACEABLE] hardware ECC based page read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
*
- * Not for syndrome calculating ecc controllers which need a special oob layout
+ * Not for syndrome calculating ECC controllers which need a special oob layout.
*/
static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int page)
}
/**
- * nand_read_page_hwecc_oob_first - [REPLACABLE] hw ecc, read oob first
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: buffer to store read data
- * @page: page number to read
+ * nand_read_page_hwecc_oob_first - [REPLACEABLE] hw ecc, read oob first
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
*
- * Hardware ECC for large page chips, require OOB to be read first.
- * For this ECC mode, the write_page method is re-used from ECC_HW.
- * These methods read/write ECC from the OOB area, unlike the
- * ECC_HW_SYNDROME support with multiple ECC steps, follows the
- * "infix ECC" scheme and reads/writes ECC from the data area, by
- * overwriting the NAND manufacturer bad block markings.
+ * Hardware ECC for large page chips, require OOB to be read first. For this
+ * ECC mode, the write_page method is re-used from ECC_HW. These methods
+ * read/write ECC from the OOB area, unlike the ECC_HW_SYNDROME support with
+ * multiple ECC steps, follows the "infix ECC" scheme and reads/writes ECC from
+ * the data area, by overwriting the NAND manufacturer bad block markings.
*/
static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
struct nand_chip *chip, uint8_t *buf, int page)
}
/**
- * nand_read_page_syndrome - [REPLACABLE] hardware ecc syndrom based page read
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: buffer to store read data
- * @page: page number to read
+ * nand_read_page_syndrome - [REPLACEABLE] hardware ECC syndrome based page read
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
*
- * The hw generator calculates the error syndrome automatically. Therefor
- * we need a special oob layout and handling.
+ * The hw generator calculates the error syndrome automatically. Therefore we
+ * need a special oob layout and handling.
*/
static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int page)
}
/**
- * nand_transfer_oob - [Internal] Transfer oob to client buffer
- * @chip: nand chip structure
- * @oob: oob destination address
- * @ops: oob ops structure
- * @len: size of oob to transfer
+ * nand_transfer_oob - [INTERN] Transfer oob to client buffer
+ * @chip: nand chip structure
+ * @oob: oob destination address
+ * @ops: oob ops structure
+ * @len: size of oob to transfer
*/
static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob,
struct mtd_oob_ops *ops, size_t len)
{
switch (ops->mode) {
- case MTD_OOB_PLACE:
- case MTD_OOB_RAW:
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_RAW:
memcpy(oob, chip->oob_poi + ops->ooboffs, len);
return oob + len;
- case MTD_OOB_AUTO: {
+ case MTD_OPS_AUTO_OOB: {
struct nand_oobfree *free = chip->ecc.layout->oobfree;
uint32_t boffs = 0, roffs = ops->ooboffs;
size_t bytes = 0;
for (; free->length && len; free++, len -= bytes) {
- /* Read request not from offset 0 ? */
+ /* Read request not from offset 0? */
if (unlikely(roffs)) {
if (roffs >= free->length) {
roffs -= free->length;
}
/**
- * nand_do_read_ops - [Internal] Read data with ECC
- *
- * @mtd: MTD device structure
- * @from: offset to read from
- * @ops: oob ops structure
+ * nand_do_read_ops - [INTERN] Read data with ECC
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob ops structure
*
* Internal function. Called with chip held.
*/
int ret = 0;
uint32_t readlen = ops->len;
uint32_t oobreadlen = ops->ooblen;
- uint32_t max_oobsize = ops->mode == MTD_OOB_AUTO ?
+ uint32_t max_oobsize = ops->mode == MTD_OPS_AUTO_OOB ?
mtd->oobavail : mtd->oobsize;
uint8_t *bufpoi, *oob, *buf;
bytes = min(mtd->writesize - col, readlen);
aligned = (bytes == mtd->writesize);
- /* Is the current page in the buffer ? */
+ /* Is the current page in the buffer? */
if (realpage != chip->pagebuf || oob) {
bufpoi = aligned ? buf : chip->buffers->databuf;
}
/* Now read the page into the buffer */
- if (unlikely(ops->mode == MTD_OOB_RAW))
+ if (unlikely(ops->mode == MTD_OPS_RAW))
ret = chip->ecc.read_page_raw(mtd, chip,
bufpoi, page);
else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob)
else
ret = chip->ecc.read_page(mtd, chip, bufpoi,
page);
- if (ret < 0)
+ if (ret < 0) {
+ if (!aligned)
+ /* Invalidate page cache */
+ chip->pagebuf = -1;
break;
+ }
/* Transfer not aligned data */
if (!aligned) {
if (!NAND_SUBPAGE_READ(chip) && !oob &&
- !(mtd->ecc_stats.failed - stats.failed))
+ !(mtd->ecc_stats.failed - stats.failed) &&
+ (ops->mode != MTD_OPS_RAW))
chip->pagebuf = realpage;
+ else
+ /* Invalidate page cache */
+ chip->pagebuf = -1;
memcpy(buf, chip->buffers->databuf + col, bytes);
}
if (!readlen)
break;
- /* For subsequent reads align to page boundary. */
+ /* For subsequent reads align to page boundary */
col = 0;
/* Increment page address */
realpage++;
chip->select_chip(mtd, chipnr);
}
- /* Check, if the chip supports auto page increment
- * or if we have hit a block boundary.
+ /*
+ * Check, if the chip supports auto page increment or if we
+ * have hit a block boundary.
*/
if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck))
sndcmd = 1;
/**
* nand_read - [MTD Interface] MTD compatibility function for nand_do_read_ecc
- * @mtd: MTD device structure
- * @from: offset to read from
- * @len: number of bytes to read
- * @retlen: pointer to variable to store the number of read bytes
- * @buf: the databuffer to put data
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @len: number of bytes to read
+ * @retlen: pointer to variable to store the number of read bytes
+ * @buf: the databuffer to put data
*
- * Get hold of the chip and call nand_do_read
+ * Get hold of the chip and call nand_do_read.
*/
static int nand_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, uint8_t *buf)
{
struct nand_chip *chip = mtd->priv;
+ struct mtd_oob_ops ops;
int ret;
/* Do not allow reads past end of device */
nand_get_device(chip, mtd, FL_READING);
- chip->ops.len = len;
- chip->ops.datbuf = buf;
- chip->ops.oobbuf = NULL;
+ ops.len = len;
+ ops.datbuf = buf;
+ ops.oobbuf = NULL;
+ ops.mode = 0;
- ret = nand_do_read_ops(mtd, from, &chip->ops);
+ ret = nand_do_read_ops(mtd, from, &ops);
- *retlen = chip->ops.retlen;
+ *retlen = ops.retlen;
nand_release_device(mtd);
}
/**
- * nand_read_oob_std - [REPLACABLE] the most common OOB data read function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @page: page number to read
- * @sndcmd: flag whether to issue read command or not
+ * nand_read_oob_std - [REPLACEABLE] the most common OOB data read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to read
+ * @sndcmd: flag whether to issue read command or not
*/
static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
int page, int sndcmd)
}
/**
- * nand_read_oob_syndrome - [REPLACABLE] OOB data read function for HW ECC
+ * nand_read_oob_syndrome - [REPLACEABLE] OOB data read function for HW ECC
* with syndromes
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @page: page number to read
- * @sndcmd: flag whether to issue read command or not
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to read
+ * @sndcmd: flag whether to issue read command or not
*/
static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
int page, int sndcmd)
}
/**
- * nand_write_oob_std - [REPLACABLE] the most common OOB data write function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @page: page number to write
+ * nand_write_oob_std - [REPLACEABLE] the most common OOB data write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to write
*/
static int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
int page)
}
/**
- * nand_write_oob_syndrome - [REPLACABLE] OOB data write function for HW ECC
- * with syndrome - only for large page flash !
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @page: page number to write
+ * nand_write_oob_syndrome - [REPLACEABLE] OOB data write function for HW ECC
+ * with syndrome - only for large page flash
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to write
*/
static int nand_write_oob_syndrome(struct mtd_info *mtd,
struct nand_chip *chip, int page)
}
/**
- * nand_do_read_oob - [Intern] NAND read out-of-band
- * @mtd: MTD device structure
- * @from: offset to read from
- * @ops: oob operations description structure
+ * nand_do_read_oob - [INTERN] NAND read out-of-band
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob operations description structure
*
- * NAND read out-of-band data from the spare area
+ * NAND read out-of-band data from the spare area.
*/
static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
struct mtd_oob_ops *ops)
{
int page, realpage, chipnr, sndcmd = 1;
struct nand_chip *chip = mtd->priv;
+ struct mtd_ecc_stats stats;
int blkcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1;
int readlen = ops->ooblen;
int len;
uint8_t *buf = ops->oobbuf;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08Lx, len = %i\n",
+ pr_debug("%s: from = 0x%08Lx, len = %i\n",
__func__, (unsigned long long)from, readlen);
- if (ops->mode == MTD_OOB_AUTO)
+ stats = mtd->ecc_stats;
+
+ if (ops->mode == MTD_OPS_AUTO_OOB)
len = chip->ecc.layout->oobavail;
else
len = mtd->oobsize;
if (unlikely(ops->ooboffs >= len)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to start read "
- "outside oob\n", __func__);
+ pr_debug("%s: attempt to start read outside oob\n",
+ __func__);
return -EINVAL;
}
if (unlikely(from >= mtd->size ||
ops->ooboffs + readlen > ((mtd->size >> chip->page_shift) -
(from >> chip->page_shift)) * len)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt read beyond end "
- "of device\n", __func__);
+ pr_debug("%s: attempt to read beyond end of device\n",
+ __func__);
return -EINVAL;
}
page = realpage & chip->pagemask;
while (1) {
- sndcmd = chip->ecc.read_oob(mtd, chip, page, sndcmd);
+ if (ops->mode == MTD_OPS_RAW)
+ sndcmd = chip->ecc.read_oob_raw(mtd, chip, page, sndcmd);
+ else
+ sndcmd = chip->ecc.read_oob(mtd, chip, page, sndcmd);
len = min(len, readlen);
buf = nand_transfer_oob(chip, buf, ops, len);
chip->select_chip(mtd, chipnr);
}
- /* Check, if the chip supports auto page increment
- * or if we have hit a block boundary.
+ /*
+ * Check, if the chip supports auto page increment or if we
+ * have hit a block boundary.
*/
if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck))
sndcmd = 1;
}
ops->oobretlen = ops->ooblen;
- return 0;
+
+ if (mtd->ecc_stats.failed - stats.failed)
+ return -EBADMSG;
+
+ return mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0;
}
/**
* nand_read_oob - [MTD Interface] NAND read data and/or out-of-band
- * @mtd: MTD device structure
- * @from: offset to read from
- * @ops: oob operation description structure
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob operation description structure
*
- * NAND read data and/or out-of-band data
+ * NAND read data and/or out-of-band data.
*/
static int nand_read_oob(struct mtd_info *mtd, loff_t from,
struct mtd_oob_ops *ops)
/* Do not allow reads past end of device */
if (ops->datbuf && (from + ops->len) > mtd->size) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt read "
- "beyond end of device\n", __func__);
+ pr_debug("%s: attempt to read beyond end of device\n",
+ __func__);
return -EINVAL;
}
nand_get_device(chip, mtd, FL_READING);
switch (ops->mode) {
- case MTD_OOB_PLACE:
- case MTD_OOB_AUTO:
- case MTD_OOB_RAW:
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_AUTO_OOB:
+ case MTD_OPS_RAW:
break;
default:
/**
- * nand_write_page_raw - [Intern] raw page write function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: data buffer
+ * nand_write_page_raw - [INTERN] raw page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
*
- * Not for syndrome calculating ecc controllers, which use a special oob layout
+ * Not for syndrome calculating ECC controllers, which use a special oob layout.
*/
static void nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf)
}
/**
- * nand_write_page_raw_syndrome - [Intern] raw page write function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: data buffer
+ * nand_write_page_raw_syndrome - [INTERN] raw page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
*
* We need a special oob layout and handling even when ECC isn't checked.
*/
chip->write_buf(mtd, oob, size);
}
/**
- * nand_write_page_swecc - [REPLACABLE] software ecc based page write function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: data buffer
+ * nand_write_page_swecc - [REPLACEABLE] software ECC based page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
*/
static void nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf)
const uint8_t *p = buf;
uint32_t *eccpos = chip->ecc.layout->eccpos;
- /* Software ecc calculation */
+ /* Software ECC calculation */
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
chip->ecc.calculate(mtd, p, &ecc_calc[i]);
}
/**
- * nand_write_page_hwecc - [REPLACABLE] hardware ecc based page write function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: data buffer
+ * nand_write_page_hwecc - [REPLACEABLE] hardware ECC based page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
*/
static void nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf)
}
/**
- * nand_write_page_syndrome - [REPLACABLE] hardware ecc syndrom based page write
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: data buffer
+ * nand_write_page_syndrome - [REPLACEABLE] hardware ECC syndrome based page write
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
*
- * The hw generator calculates the error syndrome automatically. Therefor
- * we need a special oob layout and handling.
+ * The hw generator calculates the error syndrome automatically. Therefore we
+ * need a special oob layout and handling.
*/
static void nand_write_page_syndrome(struct mtd_info *mtd,
struct nand_chip *chip, const uint8_t *buf)
/**
* nand_write_page - [REPLACEABLE] write one page
- * @mtd: MTD device structure
- * @chip: NAND chip descriptor
- * @buf: the data to write
- * @page: page number to write
- * @cached: cached programming
- * @raw: use _raw version of write_page
+ * @mtd: MTD device structure
+ * @chip: NAND chip descriptor
+ * @buf: the data to write
+ * @page: page number to write
+ * @cached: cached programming
+ * @raw: use _raw version of write_page
*/
static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf, int page, int cached, int raw)
chip->ecc.write_page(mtd, chip, buf);
/*
- * Cached progamming disabled for now, Not sure if its worth the
- * trouble. The speed gain is not very impressive. (2.3->2.6Mib/s)
+ * Cached progamming disabled for now. Not sure if it's worth the
+ * trouble. The speed gain is not very impressive. (2.3->2.6Mib/s).
*/
cached = 0;
status = chip->waitfunc(mtd, chip);
/*
* See if operation failed and additional status checks are
- * available
+ * available.
*/
if ((status & NAND_STATUS_FAIL) && (chip->errstat))
status = chip->errstat(mtd, chip, FL_WRITING, status,
}
/**
- * nand_fill_oob - [Internal] Transfer client buffer to oob
- * @chip: nand chip structure
- * @oob: oob data buffer
- * @len: oob data write length
- * @ops: oob ops structure
+ * nand_fill_oob - [INTERN] Transfer client buffer to oob
+ * @mtd: MTD device structure
+ * @oob: oob data buffer
+ * @len: oob data write length
+ * @ops: oob ops structure
*/
-static uint8_t *nand_fill_oob(struct nand_chip *chip, uint8_t *oob, size_t len,
- struct mtd_oob_ops *ops)
+static uint8_t *nand_fill_oob(struct mtd_info *mtd, uint8_t *oob, size_t len,
+ struct mtd_oob_ops *ops)
{
+ struct nand_chip *chip = mtd->priv;
+
+ /*
+ * Initialise to all 0xFF, to avoid the possibility of left over OOB
+ * data from a previous OOB read.
+ */
+ memset(chip->oob_poi, 0xff, mtd->oobsize);
+
switch (ops->mode) {
- case MTD_OOB_PLACE:
- case MTD_OOB_RAW:
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_RAW:
memcpy(chip->oob_poi + ops->ooboffs, oob, len);
return oob + len;
- case MTD_OOB_AUTO: {
+ case MTD_OPS_AUTO_OOB: {
struct nand_oobfree *free = chip->ecc.layout->oobfree;
uint32_t boffs = 0, woffs = ops->ooboffs;
size_t bytes = 0;
for (; free->length && len; free++, len -= bytes) {
- /* Write request not from offset 0 ? */
+ /* Write request not from offset 0? */
if (unlikely(woffs)) {
if (woffs >= free->length) {
woffs -= free->length;
#define NOTALIGNED(x) ((x & (chip->subpagesize - 1)) != 0)
/**
- * nand_do_write_ops - [Internal] NAND write with ECC
- * @mtd: MTD device structure
- * @to: offset to write to
- * @ops: oob operations description structure
+ * nand_do_write_ops - [INTERN] NAND write with ECC
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operations description structure
*
- * NAND write with ECC
+ * NAND write with ECC.
*/
static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
uint32_t writelen = ops->len;
uint32_t oobwritelen = ops->ooblen;
- uint32_t oobmaxlen = ops->mode == MTD_OOB_AUTO ?
+ uint32_t oobmaxlen = ops->mode == MTD_OPS_AUTO_OOB ?
mtd->oobavail : mtd->oobsize;
uint8_t *oob = ops->oobbuf;
if (!writelen)
return 0;
- /* reject writes, which are not page aligned */
+ /* Reject writes, which are not page aligned */
if (NOTALIGNED(to) || NOTALIGNED(ops->len)) {
- printk(KERN_NOTICE "%s: Attempt to write not "
- "page aligned data\n", __func__);
+ pr_notice("%s: attempt to write non page aligned data\n",
+ __func__);
return -EINVAL;
}
(chip->pagebuf << chip->page_shift) < (to + ops->len))
chip->pagebuf = -1;
- /* If we're not given explicit OOB data, let it be 0xFF */
- if (likely(!oob))
- memset(chip->oob_poi, 0xff, mtd->oobsize);
-
/* Don't allow multipage oob writes with offset */
if (oob && ops->ooboffs && (ops->ooboffs + ops->ooblen > oobmaxlen))
return -EINVAL;
int cached = writelen > bytes && page != blockmask;
uint8_t *wbuf = buf;
- /* Partial page write ? */
+ /* Partial page write? */
if (unlikely(column || writelen < (mtd->writesize - 1))) {
cached = 0;
bytes = min_t(int, bytes - column, (int) writelen);
if (unlikely(oob)) {
size_t len = min(oobwritelen, oobmaxlen);
- oob = nand_fill_oob(chip, oob, len, ops);
+ oob = nand_fill_oob(mtd, oob, len, ops);
oobwritelen -= len;
+ } else {
+ /* We still need to erase leftover OOB data */
+ memset(chip->oob_poi, 0xff, mtd->oobsize);
}
ret = chip->write_page(mtd, chip, wbuf, page, cached,
- (ops->mode == MTD_OOB_RAW));
+ (ops->mode == MTD_OPS_RAW));
if (ret)
break;
/**
* panic_nand_write - [MTD Interface] NAND write with ECC
- * @mtd: MTD device structure
- * @to: offset to write to
- * @len: number of bytes to write
- * @retlen: pointer to variable to store the number of written bytes
- * @buf: the data to write
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @len: number of bytes to write
+ * @retlen: pointer to variable to store the number of written bytes
+ * @buf: the data to write
*
* NAND write with ECC. Used when performing writes in interrupt context, this
* may for example be called by mtdoops when writing an oops while in panic.
size_t *retlen, const uint8_t *buf)
{
struct nand_chip *chip = mtd->priv;
+ struct mtd_oob_ops ops;
int ret;
/* Do not allow reads past end of device */
if (!len)
return 0;
- /* Wait for the device to get ready. */
+ /* Wait for the device to get ready */
panic_nand_wait(mtd, chip, 400);
- /* Grab the device. */
+ /* Grab the device */
panic_nand_get_device(chip, mtd, FL_WRITING);
- chip->ops.len = len;
- chip->ops.datbuf = (uint8_t *)buf;
- chip->ops.oobbuf = NULL;
+ ops.len = len;
+ ops.datbuf = (uint8_t *)buf;
+ ops.oobbuf = NULL;
+ ops.mode = 0;
- ret = nand_do_write_ops(mtd, to, &chip->ops);
+ ret = nand_do_write_ops(mtd, to, &ops);
- *retlen = chip->ops.retlen;
+ *retlen = ops.retlen;
return ret;
}
/**
* nand_write - [MTD Interface] NAND write with ECC
- * @mtd: MTD device structure
- * @to: offset to write to
- * @len: number of bytes to write
- * @retlen: pointer to variable to store the number of written bytes
- * @buf: the data to write
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @len: number of bytes to write
+ * @retlen: pointer to variable to store the number of written bytes
+ * @buf: the data to write
*
- * NAND write with ECC
+ * NAND write with ECC.
*/
static int nand_write(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, const uint8_t *buf)
{
struct nand_chip *chip = mtd->priv;
+ struct mtd_oob_ops ops;
int ret;
/* Do not allow reads past end of device */
nand_get_device(chip, mtd, FL_WRITING);
- chip->ops.len = len;
- chip->ops.datbuf = (uint8_t *)buf;
- chip->ops.oobbuf = NULL;
+ ops.len = len;
+ ops.datbuf = (uint8_t *)buf;
+ ops.oobbuf = NULL;
+ ops.mode = 0;
- ret = nand_do_write_ops(mtd, to, &chip->ops);
+ ret = nand_do_write_ops(mtd, to, &ops);
- *retlen = chip->ops.retlen;
+ *retlen = ops.retlen;
nand_release_device(mtd);
/**
* nand_do_write_oob - [MTD Interface] NAND write out-of-band
- * @mtd: MTD device structure
- * @to: offset to write to
- * @ops: oob operation description structure
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operation description structure
*
- * NAND write out-of-band
+ * NAND write out-of-band.
*/
static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
int chipnr, page, status, len;
struct nand_chip *chip = mtd->priv;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n",
+ pr_debug("%s: to = 0x%08x, len = %i\n",
__func__, (unsigned int)to, (int)ops->ooblen);
- if (ops->mode == MTD_OOB_AUTO)
+ if (ops->mode == MTD_OPS_AUTO_OOB)
len = chip->ecc.layout->oobavail;
else
len = mtd->oobsize;
/* Do not allow write past end of page */
if ((ops->ooboffs + ops->ooblen) > len) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to write "
- "past end of page\n", __func__);
+ pr_debug("%s: attempt to write past end of page\n",
+ __func__);
return -EINVAL;
}
if (unlikely(ops->ooboffs >= len)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to start "
- "write outside oob\n", __func__);
+ pr_debug("%s: attempt to start write outside oob\n",
+ __func__);
return -EINVAL;
}
ops->ooboffs + ops->ooblen >
((mtd->size >> chip->page_shift) -
(to >> chip->page_shift)) * len)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt write beyond "
- "end of device\n", __func__);
+ pr_debug("%s: attempt to write beyond end of device\n",
+ __func__);
return -EINVAL;
}
if (page == chip->pagebuf)
chip->pagebuf = -1;
- memset(chip->oob_poi, 0xff, mtd->oobsize);
- nand_fill_oob(chip, ops->oobbuf, ops->ooblen, ops);
- status = chip->ecc.write_oob(mtd, chip, page & chip->pagemask);
- memset(chip->oob_poi, 0xff, mtd->oobsize);
+ nand_fill_oob(mtd, ops->oobbuf, ops->ooblen, ops);
+
+ if (ops->mode == MTD_OPS_RAW)
+ status = chip->ecc.write_oob_raw(mtd, chip, page & chip->pagemask);
+ else
+ status = chip->ecc.write_oob(mtd, chip, page & chip->pagemask);
if (status)
return status;
/**
* nand_write_oob - [MTD Interface] NAND write data and/or out-of-band
- * @mtd: MTD device structure
- * @to: offset to write to
- * @ops: oob operation description structure
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operation description structure
*/
static int nand_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
/* Do not allow writes past end of device */
if (ops->datbuf && (to + ops->len) > mtd->size) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt write beyond "
- "end of device\n", __func__);
+ pr_debug("%s: attempt to write beyond end of device\n",
+ __func__);
return -EINVAL;
}
nand_get_device(chip, mtd, FL_WRITING);
switch (ops->mode) {
- case MTD_OOB_PLACE:
- case MTD_OOB_AUTO:
- case MTD_OOB_RAW:
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_AUTO_OOB:
+ case MTD_OPS_RAW:
break;
default:
}
/**
- * single_erease_cmd - [GENERIC] NAND standard block erase command function
- * @mtd: MTD device structure
- * @page: the page address of the block which will be erased
+ * single_erase_cmd - [GENERIC] NAND standard block erase command function
+ * @mtd: MTD device structure
+ * @page: the page address of the block which will be erased
*
- * Standard erase command for NAND chips
+ * Standard erase command for NAND chips.
*/
static void single_erase_cmd(struct mtd_info *mtd, int page)
{
}
/**
- * multi_erease_cmd - [GENERIC] AND specific block erase command function
- * @mtd: MTD device structure
- * @page: the page address of the block which will be erased
+ * multi_erase_cmd - [GENERIC] AND specific block erase command function
+ * @mtd: MTD device structure
+ * @page: the page address of the block which will be erased
*
- * AND multi block erase command function
- * Erase 4 consecutive blocks
+ * AND multi block erase command function. Erase 4 consecutive blocks.
*/
static void multi_erase_cmd(struct mtd_info *mtd, int page)
{
/**
* nand_erase - [MTD Interface] erase block(s)
- * @mtd: MTD device structure
- * @instr: erase instruction
+ * @mtd: MTD device structure
+ * @instr: erase instruction
*
- * Erase one ore more blocks
+ * Erase one ore more blocks.
*/
static int nand_erase(struct mtd_info *mtd, struct erase_info *instr)
{
#define BBT_PAGE_MASK 0xffffff3f
/**
- * nand_erase_nand - [Internal] erase block(s)
- * @mtd: MTD device structure
- * @instr: erase instruction
- * @allowbbt: allow erasing the bbt area
+ * nand_erase_nand - [INTERN] erase block(s)
+ * @mtd: MTD device structure
+ * @instr: erase instruction
+ * @allowbbt: allow erasing the bbt area
*
- * Erase one ore more blocks
+ * Erase one ore more blocks.
*/
int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
int allowbbt)
unsigned int bbt_masked_page = 0xffffffff;
loff_t len;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: start = 0x%012llx, len = %llu\n",
- __func__, (unsigned long long)instr->addr,
- (unsigned long long)instr->len);
+ pr_debug("%s: start = 0x%012llx, len = %llu\n",
+ __func__, (unsigned long long)instr->addr,
+ (unsigned long long)instr->len);
if (check_offs_len(mtd, instr->addr, instr->len))
return -EINVAL;
/* Check, if it is write protected */
if (nand_check_wp(mtd)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Device is write protected!!!\n",
- __func__);
+ pr_debug("%s: device is write protected!\n",
+ __func__);
instr->state = MTD_ERASE_FAILED;
goto erase_exit;
}
* If BBT requires refresh, set the BBT page mask to see if the BBT
* should be rewritten. Otherwise the mask is set to 0xffffffff which
* can not be matched. This is also done when the bbt is actually
- * erased to avoid recusrsive updates
+ * erased to avoid recursive updates.
*/
if (chip->options & BBT_AUTO_REFRESH && !allowbbt)
bbt_masked_page = chip->bbt_td->pages[chipnr] & BBT_PAGE_MASK;
instr->state = MTD_ERASING;
while (len) {
- /*
- * heck if we have a bad block, we do not erase bad blocks !
- */
+ /* Heck if we have a bad block, we do not erase bad blocks! */
if (nand_block_checkbad(mtd, ((loff_t) page) <<
chip->page_shift, 0, allowbbt)) {
- printk(KERN_WARNING "%s: attempt to erase a bad block "
- "at page 0x%08x\n", __func__, page);
+ pr_warn("%s: attempt to erase a bad block at page 0x%08x\n",
+ __func__, page);
instr->state = MTD_ERASE_FAILED;
goto erase_exit;
}
/*
* Invalidate the page cache, if we erase the block which
- * contains the current cached page
+ * contains the current cached page.
*/
if (page <= chip->pagebuf && chip->pagebuf <
(page + pages_per_block))
/* See if block erase succeeded */
if (status & NAND_STATUS_FAIL) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Failed erase, "
- "page 0x%08x\n", __func__, page);
+ pr_debug("%s: failed erase, page 0x%08x\n",
+ __func__, page);
instr->state = MTD_ERASE_FAILED;
instr->fail_addr =
((loff_t)page << chip->page_shift);
/*
* If BBT requires refresh, set the BBT rewrite flag to the
- * page being erased
+ * page being erased.
*/
if (bbt_masked_page != 0xffffffff &&
(page & BBT_PAGE_MASK) == bbt_masked_page)
/*
* If BBT requires refresh and BBT-PERCHIP, set the BBT
- * page mask to see if this BBT should be rewritten
+ * page mask to see if this BBT should be rewritten.
*/
if (bbt_masked_page != 0xffffffff &&
(chip->bbt_td->options & NAND_BBT_PERCHIP))
/*
* If BBT requires refresh and erase was successful, rewrite any
- * selected bad block tables
+ * selected bad block tables.
*/
if (bbt_masked_page == 0xffffffff || ret)
return ret;
for (chipnr = 0; chipnr < chip->numchips; chipnr++) {
if (!rewrite_bbt[chipnr])
continue;
- /* update the BBT for chip */
- DEBUG(MTD_DEBUG_LEVEL0, "%s: nand_update_bbt "
- "(%d:0x%0llx 0x%0x)\n", __func__, chipnr,
- rewrite_bbt[chipnr], chip->bbt_td->pages[chipnr]);
+ /* Update the BBT for chip */
+ pr_debug("%s: nand_update_bbt (%d:0x%0llx 0x%0x)\n",
+ __func__, chipnr, rewrite_bbt[chipnr],
+ chip->bbt_td->pages[chipnr]);
nand_update_bbt(mtd, rewrite_bbt[chipnr]);
}
/**
* nand_sync - [MTD Interface] sync
- * @mtd: MTD device structure
+ * @mtd: MTD device structure
*
- * Sync is actually a wait for chip ready function
+ * Sync is actually a wait for chip ready function.
*/
static void nand_sync(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: called\n", __func__);
+ pr_debug("%s: called\n", __func__);
/* Grab the lock and see if the device is available */
nand_get_device(chip, mtd, FL_SYNCING);
/**
* nand_block_isbad - [MTD Interface] Check if block at offset is bad
- * @mtd: MTD device structure
- * @offs: offset relative to mtd start
+ * @mtd: MTD device structure
+ * @offs: offset relative to mtd start
*/
static int nand_block_isbad(struct mtd_info *mtd, loff_t offs)
{
/**
* nand_block_markbad - [MTD Interface] Mark block at the given offset as bad
- * @mtd: MTD device structure
- * @ofs: offset relative to mtd start
+ * @mtd: MTD device structure
+ * @ofs: offset relative to mtd start
*/
static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs)
{
ret = nand_block_isbad(mtd, ofs);
if (ret) {
- /* If it was bad already, return success and do nothing. */
+ /* If it was bad already, return success and do nothing */
if (ret > 0)
return 0;
return ret;
/**
* nand_suspend - [MTD Interface] Suspend the NAND flash
- * @mtd: MTD device structure
+ * @mtd: MTD device structure
*/
static int nand_suspend(struct mtd_info *mtd)
{
/**
* nand_resume - [MTD Interface] Resume the NAND flash
- * @mtd: MTD device structure
+ * @mtd: MTD device structure
*/
static void nand_resume(struct mtd_info *mtd)
{
if (chip->state == FL_PM_SUSPENDED)
nand_release_device(mtd);
else
- printk(KERN_ERR "%s called for a chip which is not "
- "in suspended state\n", __func__);
+ pr_err("%s called for a chip which is not in suspended state\n",
+ __func__);
}
-/*
- * Set default functions
- */
+/* Set default functions */
static void nand_set_defaults(struct nand_chip *chip, int busw)
{
/* check for proper chip_delay setup, set 20us if not */
}
-/*
- * sanitize ONFI strings so we can safely print them
- */
+/* Sanitize ONFI strings so we can safely print them */
static void sanitize_string(uint8_t *s, size_t len)
{
ssize_t i;
- /* null terminate */
+ /* Null terminate */
s[len - 1] = 0;
- /* remove non printable chars */
+ /* Remove non printable chars */
for (i = 0; i < len - 1; i++) {
if (s[i] < ' ' || s[i] > 127)
s[i] = '?';
}
- /* remove trailing spaces */
+ /* Remove trailing spaces */
strim(s);
}
}
/*
- * Check if the NAND chip is ONFI compliant, returns 1 if it is, 0 otherwise
+ * Check if the NAND chip is ONFI compliant, returns 1 if it is, 0 otherwise.
*/
static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
- int busw)
+ int *busw)
{
struct nand_onfi_params *p = &chip->onfi_params;
int i;
int val;
- /* try ONFI for unknow chip or LP */
+ /* Try ONFI for unknown chip or LP */
chip->cmdfunc(mtd, NAND_CMD_READID, 0x20, -1);
if (chip->read_byte(mtd) != 'O' || chip->read_byte(mtd) != 'N' ||
chip->read_byte(mtd) != 'F' || chip->read_byte(mtd) != 'I')
return 0;
- printk(KERN_INFO "ONFI flash detected\n");
+ pr_info("ONFI flash detected\n");
chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1);
for (i = 0; i < 3; i++) {
chip->read_buf(mtd, (uint8_t *)p, sizeof(*p));
if (onfi_crc16(ONFI_CRC_BASE, (uint8_t *)p, 254) ==
le16_to_cpu(p->crc)) {
- printk(KERN_INFO "ONFI param page %d valid\n", i);
+ pr_info("ONFI param page %d valid\n", i);
break;
}
}
if (i == 3)
return 0;
- /* check version */
+ /* Check version */
val = le16_to_cpu(p->revision);
if (val & (1 << 5))
chip->onfi_version = 23;
chip->onfi_version = 0;
if (!chip->onfi_version) {
- printk(KERN_INFO "%s: unsupported ONFI version: %d\n",
- __func__, val);
+ pr_info("%s: unsupported ONFI version: %d\n", __func__, val);
return 0;
}
mtd->erasesize = le32_to_cpu(p->pages_per_block) * mtd->writesize;
mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page);
chip->chipsize = (uint64_t)le32_to_cpu(p->blocks_per_lun) * mtd->erasesize;
- busw = 0;
+ *busw = 0;
if (le16_to_cpu(p->features) & 1)
- busw = NAND_BUSWIDTH_16;
+ *busw = NAND_BUSWIDTH_16;
chip->options &= ~NAND_CHIPOPTIONS_MSK;
chip->options |= (NAND_NO_READRDY |
}
/*
- * Get the flash and manufacturer id and lookup if the type is supported
+ * Get the flash and manufacturer id and lookup if the type is supported.
*/
static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
struct nand_chip *chip,
/*
* Reset the chip, required by some chips (e.g. Micron MT29FxGxxxxx)
- * after power-up
+ * after power-up.
*/
chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
*maf_id = chip->read_byte(mtd);
*dev_id = chip->read_byte(mtd);
- /* Try again to make sure, as some systems the bus-hold or other
+ /*
+ * Try again to make sure, as some systems the bus-hold or other
* interface concerns can cause random data which looks like a
* possibly credible NAND flash to appear. If the two results do
* not match, ignore the device completely.
id_data[i] = chip->read_byte(mtd);
if (id_data[0] != *maf_id || id_data[1] != *dev_id) {
- printk(KERN_INFO "%s: second ID read did not match "
- "%02x,%02x against %02x,%02x\n", __func__,
- *maf_id, *dev_id, id_data[0], id_data[1]);
+ pr_info("%s: second ID read did not match "
+ "%02x,%02x against %02x,%02x\n", __func__,
+ *maf_id, *dev_id, id_data[0], id_data[1]);
return ERR_PTR(-ENODEV);
}
chip->onfi_version = 0;
if (!type->name || !type->pagesize) {
/* Check is chip is ONFI compliant */
- ret = nand_flash_detect_onfi(mtd, chip, busw);
+ ret = nand_flash_detect_onfi(mtd, chip, &busw);
if (ret)
goto ident_done;
}
chip->chipsize = (uint64_t)type->chipsize << 20;
if (!type->pagesize && chip->init_size) {
- /* set the pagesize, oobsize, erasesize by the driver*/
+ /* Set the pagesize, oobsize, erasesize by the driver */
busw = chip->init_size(mtd, chip, id_data);
} else if (!type->pagesize) {
int extid;
}
} else {
/*
- * Old devices have chip data hardcoded in the device id table
+ * Old devices have chip data hardcoded in the device id table.
*/
mtd->erasesize = type->erasesize;
mtd->writesize = type->pagesize;
/*
* Check for Spansion/AMD ID + repeating 5th, 6th byte since
* some Spansion chips have erasesize that conflicts with size
- * listed in nand_ids table
+ * listed in nand_ids table.
* Data sheet (5 byte ID): Spansion S30ML-P ORNAND (p.39)
*/
if (*maf_id == NAND_MFR_AMD && id_data[4] != 0x00 &&
chip->options &= ~NAND_CHIPOPTIONS_MSK;
chip->options |= type->options & NAND_CHIPOPTIONS_MSK;
- /* Check if chip is a not a samsung device. Do not clear the
- * options for chips which are not having an extended id.
+ /*
+ * Check if chip is not a Samsung device. Do not clear the
+ * options for chips which do not have an extended id.
*/
if (*maf_id != NAND_MFR_SAMSUNG && !type->pagesize)
chip->options &= ~NAND_SAMSUNG_LP_OPTIONS;
ident_done:
/*
- * Set chip as a default. Board drivers can override it, if necessary
+ * Set chip as a default. Board drivers can override it, if necessary.
*/
chip->options |= NAND_NO_AUTOINCR;
/*
* Check, if buswidth is correct. Hardware drivers should set
- * chip correct !
+ * chip correct!
*/
if (busw != (chip->options & NAND_BUSWIDTH_16)) {
- printk(KERN_INFO "NAND device: Manufacturer ID:"
- " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id,
- *dev_id, nand_manuf_ids[maf_idx].name, mtd->name);
- printk(KERN_WARNING "NAND bus width %d instead %d bit\n",
- (chip->options & NAND_BUSWIDTH_16) ? 16 : 8,
- busw ? 16 : 8);
+ pr_info("NAND device: Manufacturer ID:"
+ " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id,
+ *dev_id, nand_manuf_ids[maf_idx].name, mtd->name);
+ pr_warn("NAND bus width %d instead %d bit\n",
+ (chip->options & NAND_BUSWIDTH_16) ? 16 : 8,
+ busw ? 16 : 8);
return ERR_PTR(-EINVAL);
}
/* Calculate the address shift from the page size */
chip->page_shift = ffs(mtd->writesize) - 1;
- /* Convert chipsize to number of pages per chip -1. */
+ /* Convert chipsize to number of pages per chip -1 */
chip->pagemask = (chip->chipsize >> chip->page_shift) - 1;
chip->bbt_erase_shift = chip->phys_erase_shift =
if ((chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
(*maf_id == NAND_MFR_SAMSUNG ||
*maf_id == NAND_MFR_HYNIX))
- chip->options |= NAND_BBT_SCANLASTPAGE;
+ chip->bbt_options |= NAND_BBT_SCANLASTPAGE;
else if ((!(chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
(*maf_id == NAND_MFR_SAMSUNG ||
*maf_id == NAND_MFR_HYNIX ||
*maf_id == NAND_MFR_AMD)) ||
(mtd->writesize == 2048 &&
*maf_id == NAND_MFR_MICRON))
- chip->options |= NAND_BBT_SCAN2NDPAGE;
-
- /*
- * Numonyx/ST 2K pages, x8 bus use BOTH byte 1 and 6
- */
- if (!(busw & NAND_BUSWIDTH_16) &&
- *maf_id == NAND_MFR_STMICRO &&
- mtd->writesize == 2048) {
- chip->options |= NAND_BBT_SCANBYTE1AND6;
- chip->badblockpos = 0;
- }
+ chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
/* Check for AND chips with 4 page planes */
if (chip->options & NAND_4PAGE_ARRAY)
else
chip->erase_cmd = single_erase_cmd;
- /* Do not replace user supplied command function ! */
+ /* Do not replace user supplied command function! */
if (mtd->writesize > 512 && chip->cmdfunc == nand_command)
chip->cmdfunc = nand_command_lp;
- /* TODO onfi flash name */
- printk(KERN_INFO "NAND device: Manufacturer ID:"
+ pr_info("NAND device: Manufacturer ID:"
" 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, *dev_id,
nand_manuf_ids[maf_idx].name,
chip->onfi_version ? chip->onfi_params.model : type->name);
/**
* nand_scan_ident - [NAND Interface] Scan for the NAND device
- * @mtd: MTD device structure
- * @maxchips: Number of chips to scan for
- * @table: Alternative NAND ID table
+ * @mtd: MTD device structure
+ * @maxchips: number of chips to scan for
+ * @table: alternative NAND ID table
*
- * This is the first phase of the normal nand_scan() function. It
- * reads the flash ID and sets up MTD fields accordingly.
+ * This is the first phase of the normal nand_scan() function. It reads the
+ * flash ID and sets up MTD fields accordingly.
*
* The mtd->owner field must be set to the module of the caller.
*/
if (IS_ERR(type)) {
if (!(chip->options & NAND_SCAN_SILENT_NODEV))
- printk(KERN_WARNING "No NAND device found.\n");
+ pr_warn("No NAND device found\n");
chip->select_chip(mtd, -1);
return PTR_ERR(type);
}
break;
}
if (i > 1)
- printk(KERN_INFO "%d NAND chips detected\n", i);
+ pr_info("%d NAND chips detected\n", i);
/* Store the number of chips and calc total size for mtd */
chip->numchips = i;
/**
* nand_scan_tail - [NAND Interface] Scan for the NAND device
- * @mtd: MTD device structure
+ * @mtd: MTD device structure
*
- * This is the second phase of the normal nand_scan() function. It
- * fills out all the uninitialized function pointers with the defaults
- * and scans for a bad block table if appropriate.
+ * This is the second phase of the normal nand_scan() function. It fills out
+ * all the uninitialized function pointers with the defaults and scans for a
+ * bad block table if appropriate.
*/
int nand_scan_tail(struct mtd_info *mtd)
{
chip->oob_poi = chip->buffers->databuf + mtd->writesize;
/*
- * If no default placement scheme is given, select an appropriate one
+ * If no default placement scheme is given, select an appropriate one.
*/
if (!chip->ecc.layout && (chip->ecc.mode != NAND_ECC_SOFT_BCH)) {
switch (mtd->oobsize) {
chip->ecc.layout = &nand_oob_128;
break;
default:
- printk(KERN_WARNING "No oob scheme defined for "
- "oobsize %d\n", mtd->oobsize);
+ pr_warn("No oob scheme defined for oobsize %d\n",
+ mtd->oobsize);
BUG();
}
}
chip->write_page = nand_write_page;
/*
- * check ECC mode, default to software if 3byte/512byte hardware ECC is
+ * Check ECC mode, default to software if 3byte/512byte hardware ECC is
* selected and we have 256 byte pagesize fallback to software ECC
*/
/* Similar to NAND_ECC_HW, but a separate read_page handle */
if (!chip->ecc.calculate || !chip->ecc.correct ||
!chip->ecc.hwctl) {
- printk(KERN_WARNING "No ECC functions supplied; "
- "Hardware ECC not possible\n");
+ pr_warn("No ECC functions supplied; "
+ "hardware ECC not possible\n");
BUG();
}
if (!chip->ecc.read_page)
chip->ecc.read_page = nand_read_page_hwecc_oob_first;
case NAND_ECC_HW:
- /* Use standard hwecc read page function ? */
+ /* Use standard hwecc read page function? */
if (!chip->ecc.read_page)
chip->ecc.read_page = nand_read_page_hwecc;
if (!chip->ecc.write_page)
chip->ecc.read_page == nand_read_page_hwecc ||
!chip->ecc.write_page ||
chip->ecc.write_page == nand_write_page_hwecc)) {
- printk(KERN_WARNING "No ECC functions supplied; "
- "Hardware ECC not possible\n");
+ pr_warn("No ECC functions supplied; "
+ "hardware ECC not possible\n");
BUG();
}
- /* Use standard syndrome read/write page function ? */
+ /* Use standard syndrome read/write page function? */
if (!chip->ecc.read_page)
chip->ecc.read_page = nand_read_page_syndrome;
if (!chip->ecc.write_page)
if (mtd->writesize >= chip->ecc.size)
break;
- printk(KERN_WARNING "%d byte HW ECC not possible on "
- "%d byte page size, fallback to SW ECC\n",
- chip->ecc.size, mtd->writesize);
+ pr_warn("%d byte HW ECC not possible on "
+ "%d byte page size, fallback to SW ECC\n",
+ chip->ecc.size, mtd->writesize);
chip->ecc.mode = NAND_ECC_SOFT;
case NAND_ECC_SOFT:
case NAND_ECC_SOFT_BCH:
if (!mtd_nand_has_bch()) {
- printk(KERN_WARNING "CONFIG_MTD_ECC_BCH not enabled\n");
+ pr_warn("CONFIG_MTD_ECC_BCH not enabled\n");
BUG();
}
chip->ecc.calculate = nand_bch_calculate_ecc;
/*
* Board driver should supply ecc.size and ecc.bytes values to
* select how many bits are correctable; see nand_bch_init()
- * for details.
- * Otherwise, default to 4 bits for large page devices
+ * for details. Otherwise, default to 4 bits for large page
+ * devices.
*/
if (!chip->ecc.size && (mtd->oobsize >= 64)) {
chip->ecc.size = 512;
chip->ecc.bytes,
&chip->ecc.layout);
if (!chip->ecc.priv) {
- printk(KERN_WARNING "BCH ECC initialization failed!\n");
+ pr_warn("BCH ECC initialization failed!\n");
BUG();
}
break;
case NAND_ECC_NONE:
- printk(KERN_WARNING "NAND_ECC_NONE selected by board driver. "
- "This is not recommended !!\n");
+ pr_warn("NAND_ECC_NONE selected by board driver. "
+ "This is not recommended!\n");
chip->ecc.read_page = nand_read_page_raw;
chip->ecc.write_page = nand_write_page_raw;
chip->ecc.read_oob = nand_read_oob_std;
break;
default:
- printk(KERN_WARNING "Invalid NAND_ECC_MODE %d\n",
- chip->ecc.mode);
+ pr_warn("Invalid NAND_ECC_MODE %d\n", chip->ecc.mode);
BUG();
}
+ /* For many systems, the standard OOB write also works for raw */
+ if (!chip->ecc.read_oob_raw)
+ chip->ecc.read_oob_raw = chip->ecc.read_oob;
+ if (!chip->ecc.write_oob_raw)
+ chip->ecc.write_oob_raw = chip->ecc.write_oob;
+
/*
* The number of bytes available for a client to place data into
- * the out of band area
+ * the out of band area.
*/
chip->ecc.layout->oobavail = 0;
for (i = 0; chip->ecc.layout->oobfree[i].length
/*
* Set the number of read / write steps for one page depending on ECC
- * mode
+ * mode.
*/
chip->ecc.steps = mtd->writesize / chip->ecc.size;
if (chip->ecc.steps * chip->ecc.size != mtd->writesize) {
- printk(KERN_WARNING "Invalid ecc parameters\n");
+ pr_warn("Invalid ECC parameters\n");
BUG();
}
chip->ecc.total = chip->ecc.steps * chip->ecc.bytes;
- /*
- * Allow subpage writes up to ecc.steps. Not possible for MLC
- * FLASH.
- */
+ /* Allow subpage writes up to ecc.steps. Not possible for MLC flash */
if (!(chip->options & NAND_NO_SUBPAGE_WRITE) &&
!(chip->cellinfo & NAND_CI_CELLTYPE_MSK)) {
switch (chip->ecc.steps) {
}
EXPORT_SYMBOL(nand_scan_tail);
-/* is_module_text_address() isn't exported, and it's mostly a pointless
+/*
+ * is_module_text_address() isn't exported, and it's mostly a pointless
* test if this is a module _anyway_ -- they'd have to try _really_ hard
- * to call us from in-kernel code if the core NAND support is modular. */
+ * to call us from in-kernel code if the core NAND support is modular.
+ */
#ifdef MODULE
#define caller_is_module() (1)
#else
/**
* nand_scan - [NAND Interface] Scan for the NAND device
- * @mtd: MTD device structure
- * @maxchips: Number of chips to scan for
- *
- * This fills out all the uninitialized function pointers
- * with the defaults.
- * The flash ID is read and the mtd/chip structures are
- * filled with the appropriate values.
- * The mtd->owner field must be set to the module of the caller
+ * @mtd: MTD device structure
+ * @maxchips: number of chips to scan for
*
+ * This fills out all the uninitialized function pointers with the defaults.
+ * The flash ID is read and the mtd/chip structures are filled with the
+ * appropriate values. The mtd->owner field must be set to the module of the
+ * caller.
*/
int nand_scan(struct mtd_info *mtd, int maxchips)
{
/* Many callers got this wrong, so check for it for a while... */
if (!mtd->owner && caller_is_module()) {
- printk(KERN_CRIT "%s called with NULL mtd->owner!\n",
- __func__);
+ pr_crit("%s called with NULL mtd->owner!\n", __func__);
BUG();
}
/**
* nand_release - [NAND Interface] Free resources held by the NAND device
- * @mtd: MTD device structure
-*/
+ * @mtd: MTD device structure
+ */
void nand_release(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
*
* When nand_scan_bbt is called, then it tries to find the bad block table
* depending on the options in the BBT descriptor(s). If no flash based BBT
- * (NAND_USE_FLASH_BBT) is specified then the device is scanned for factory
+ * (NAND_BBT_USE_FLASH) is specified then the device is scanned for factory
* marked good / bad blocks. This information is used to create a memory BBT.
* Once a new bad block is discovered then the "factory" information is updated
* on the device.
* The table is marked in the OOB area with an ident pattern and a version
* number which indicates which of both tables is more up to date. If the NAND
* controller needs the complete OOB area for the ECC information then the
- * option NAND_USE_FLASH_BBT_NO_OOB should be used: it moves the ident pattern
- * and the version byte into the data area and the OOB area will remain
- * untouched.
+ * option NAND_BBT_NO_OOB should be used (along with NAND_BBT_USE_FLASH, of
+ * course): it moves the ident pattern and the version byte into the data area
+ * and the OOB area will remain untouched.
*
* The table uses 2 bits per block
* 11b: block is good
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/vmalloc.h>
+#include <linux/export.h>
static int check_pattern_no_oob(uint8_t *buf, struct nand_bbt_descr *td)
{
/**
* check_pattern - [GENERIC] check if a pattern is in the buffer
- * @buf: the buffer to search
- * @len: the length of buffer to search
- * @paglen: the pagelength
- * @td: search pattern descriptor
+ * @buf: the buffer to search
+ * @len: the length of buffer to search
+ * @paglen: the pagelength
+ * @td: search pattern descriptor
*
- * Check for a pattern at the given place. Used to search bad block
- * tables and good / bad block identifiers.
- * If the SCAN_EMPTY option is set then check, if all bytes except the
- * pattern area contain 0xff
- *
-*/
+ * Check for a pattern at the given place. Used to search bad block tables and
+ * good / bad block identifiers. If the SCAN_EMPTY option is set then check, if
+ * all bytes except the pattern area contain 0xff.
+ */
static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td)
{
int i, end = 0;
p += end;
/* Compare the pattern */
- for (i = 0; i < td->len; i++) {
- if (p[i] != td->pattern[i])
- return -1;
- }
-
- /* Check both positions 1 and 6 for pattern? */
- if (td->options & NAND_BBT_SCANBYTE1AND6) {
- if (td->options & NAND_BBT_SCANEMPTY) {
- p += td->len;
- end += NAND_SMALL_BADBLOCK_POS - td->offs;
- /* Check region between positions 1 and 6 */
- for (i = 0; i < NAND_SMALL_BADBLOCK_POS - td->offs - td->len;
- i++) {
- if (*p++ != 0xff)
- return -1;
- }
- }
- else {
- p += NAND_SMALL_BADBLOCK_POS - td->offs;
- }
- /* Compare the pattern */
- for (i = 0; i < td->len; i++) {
- if (p[i] != td->pattern[i])
- return -1;
- }
- }
+ if (memcmp(p, td->pattern, td->len))
+ return -1;
if (td->options & NAND_BBT_SCANEMPTY) {
p += td->len;
/**
* check_short_pattern - [GENERIC] check if a pattern is in the buffer
- * @buf: the buffer to search
- * @td: search pattern descriptor
- *
- * Check for a pattern at the given place. Used to search bad block
- * tables and good / bad block identifiers. Same as check_pattern, but
- * no optional empty check
+ * @buf: the buffer to search
+ * @td: search pattern descriptor
*
-*/
+ * Check for a pattern at the given place. Used to search bad block tables and
+ * good / bad block identifiers. Same as check_pattern, but no optional empty
+ * check.
+ */
static int check_short_pattern(uint8_t *buf, struct nand_bbt_descr *td)
{
int i;
if (p[td->offs + i] != td->pattern[i])
return -1;
}
- /* Need to check location 1 AND 6? */
- if (td->options & NAND_BBT_SCANBYTE1AND6) {
- for (i = 0; i < td->len; i++) {
- if (p[NAND_SMALL_BADBLOCK_POS + i] != td->pattern[i])
- return -1;
- }
- }
return 0;
}
/**
* add_marker_len - compute the length of the marker in data area
- * @td: BBT descriptor used for computation
+ * @td: BBT descriptor used for computation
*
- * The length will be 0 if the markeris located in OOB area.
+ * The length will be 0 if the marker is located in OOB area.
*/
static u32 add_marker_len(struct nand_bbt_descr *td)
{
/**
* read_bbt - [GENERIC] Read the bad block table starting from page
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @page: the starting page
- * @num: the number of bbt descriptors to read
- * @td: the bbt describtion table
- * @offs: offset in the memory table
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @page: the starting page
+ * @num: the number of bbt descriptors to read
+ * @td: the bbt describtion table
+ * @offs: offset in the memory table
*
* Read the bad block table starting from page.
- *
*/
static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num,
struct nand_bbt_descr *td, int offs)
{
- int res, i, j, act = 0;
+ int res, ret = 0, i, j, act = 0;
struct nand_chip *this = mtd->priv;
size_t retlen, len, totlen;
loff_t from;
int bits = td->options & NAND_BBT_NRBITS_MSK;
- uint8_t msk = (uint8_t) ((1 << bits) - 1);
+ uint8_t msk = (uint8_t)((1 << bits) - 1);
u32 marker_len;
int reserved_block_code = td->reserved_block_code;
totlen = (num * bits) >> 3;
marker_len = add_marker_len(td);
- from = ((loff_t) page) << this->page_shift;
+ from = ((loff_t)page) << this->page_shift;
while (totlen) {
- len = min(totlen, (size_t) (1 << this->bbt_erase_shift));
+ len = min(totlen, (size_t)(1 << this->bbt_erase_shift));
if (marker_len) {
/*
* In case the BBT marker is not in the OOB area it
}
res = mtd->read(mtd, from, len, &retlen, buf);
if (res < 0) {
- if (retlen != len) {
- printk(KERN_INFO "nand_bbt: Error reading bad block table\n");
+ if (mtd_is_eccerr(res)) {
+ pr_info("nand_bbt: ECC error in BBT at "
+ "0x%012llx\n", from & ~mtd->writesize);
+ return res;
+ } else if (mtd_is_bitflip(res)) {
+ pr_info("nand_bbt: corrected error in BBT at "
+ "0x%012llx\n", from & ~mtd->writesize);
+ ret = res;
+ } else {
+ pr_info("nand_bbt: error reading BBT\n");
return res;
}
- printk(KERN_WARNING "nand_bbt: ECC error while reading bad block table\n");
}
/* Analyse data */
if (tmp == msk)
continue;
if (reserved_block_code && (tmp == reserved_block_code)) {
- printk(KERN_DEBUG "nand_read_bbt: Reserved block at 0x%012llx\n",
- (loff_t)((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
+ pr_info("nand_read_bbt: reserved block at 0x%012llx\n",
+ (loff_t)((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
this->bbt[offs + (act >> 3)] |= 0x2 << (act & 0x06);
mtd->ecc_stats.bbtblocks++;
continue;
}
- /* Leave it for now, if its matured we can move this
- * message to MTD_DEBUG_LEVEL0 */
- printk(KERN_DEBUG "nand_read_bbt: Bad block at 0x%012llx\n",
- (loff_t)((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
- /* Factory marked bad or worn out ? */
+ /*
+ * Leave it for now, if it's matured we can
+ * move this message to pr_debug.
+ */
+ pr_info("nand_read_bbt: bad block at 0x%012llx\n",
+ (loff_t)((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
+ /* Factory marked bad or worn out? */
if (tmp == 0)
this->bbt[offs + (act >> 3)] |= 0x3 << (act & 0x06);
else
totlen -= len;
from += len;
}
- return 0;
+ return ret;
}
/**
* read_abs_bbt - [GENERIC] Read the bad block table starting at a given page
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @td: descriptor for the bad block table
- * @chip: read the table for a specific chip, -1 read all chips.
- * Applies only if NAND_BBT_PERCHIP option is set
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
+ * @chip: read the table for a specific chip, -1 read all chips; applies only if
+ * NAND_BBT_PERCHIP option is set
*
- * Read the bad block table for all chips starting at a given page
- * We assume that the bbt bits are in consecutive order.
-*/
+ * Read the bad block table for all chips starting at a given page. We assume
+ * that the bbt bits are in consecutive order.
+ */
static int read_abs_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, int chip)
{
struct nand_chip *this = mtd->priv;
return 0;
}
-/*
- * BBT marker is in the first page, no OOB.
- */
+/* BBT marker is in the first page, no OOB */
static int scan_read_raw_data(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
struct nand_bbt_descr *td)
{
return mtd->read(mtd, offs, len, &retlen, buf);
}
-/*
- * Scan read raw data from flash
- */
+/* Scan read raw data from flash */
static int scan_read_raw_oob(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
size_t len)
{
struct mtd_oob_ops ops;
int res;
- ops.mode = MTD_OOB_RAW;
+ ops.mode = MTD_OPS_RAW;
ops.ooboffs = 0;
ops.ooblen = mtd->oobsize;
-
while (len > 0) {
- if (len <= mtd->writesize) {
- ops.oobbuf = buf + len;
- ops.datbuf = buf;
- ops.len = len;
- return mtd->read_oob(mtd, offs, &ops);
- } else {
- ops.oobbuf = buf + mtd->writesize;
- ops.datbuf = buf;
- ops.len = mtd->writesize;
- res = mtd->read_oob(mtd, offs, &ops);
+ ops.datbuf = buf;
+ ops.len = min(len, (size_t)mtd->writesize);
+ ops.oobbuf = buf + ops.len;
- if (res)
- return res;
- }
+ res = mtd->read_oob(mtd, offs, &ops);
+
+ if (res)
+ return res;
buf += mtd->oobsize + mtd->writesize;
len -= mtd->writesize;
return scan_read_raw_oob(mtd, buf, offs, len);
}
-/*
- * Scan write data with oob to flash
- */
+/* Scan write data with oob to flash */
static int scan_write_bbt(struct mtd_info *mtd, loff_t offs, size_t len,
uint8_t *buf, uint8_t *oob)
{
struct mtd_oob_ops ops;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooboffs = 0;
ops.ooblen = mtd->oobsize;
ops.datbuf = buf;
/**
* read_abs_bbts - [GENERIC] Read the bad block table(s) for all chips starting at a given page
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @td: descriptor for the bad block table
- * @md: descriptor for the bad block table mirror
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
+ * @md: descriptor for the bad block table mirror
*
- * Read the bad block table(s) for all chips starting at a given page
- * We assume that the bbt bits are in consecutive order.
- *
-*/
+ * Read the bad block table(s) for all chips starting at a given page. We
+ * assume that the bbt bits are in consecutive order.
+ */
static int read_abs_bbts(struct mtd_info *mtd, uint8_t *buf,
struct nand_bbt_descr *td, struct nand_bbt_descr *md)
{
scan_read_raw(mtd, buf, (loff_t)td->pages[0] << this->page_shift,
mtd->writesize, td);
td->version[0] = buf[bbt_get_ver_offs(mtd, td)];
- printk(KERN_DEBUG "Bad block table at page %d, version 0x%02X\n",
- td->pages[0], td->version[0]);
+ pr_info("Bad block table at page %d, version 0x%02X\n",
+ td->pages[0], td->version[0]);
}
/* Read the mirror version, if available */
scan_read_raw(mtd, buf, (loff_t)md->pages[0] << this->page_shift,
mtd->writesize, td);
md->version[0] = buf[bbt_get_ver_offs(mtd, md)];
- printk(KERN_DEBUG "Bad block table at page %d, version 0x%02X\n",
- md->pages[0], md->version[0]);
+ pr_info("Bad block table at page %d, version 0x%02X\n",
+ md->pages[0], md->version[0]);
}
return 1;
}
-/*
- * Scan a given block full
- */
+/* Scan a given block full */
static int scan_block_full(struct mtd_info *mtd, struct nand_bbt_descr *bd,
loff_t offs, uint8_t *buf, size_t readlen,
int scanlen, int len)
int ret, j;
ret = scan_read_raw_oob(mtd, buf, offs, readlen);
- if (ret)
+ /* Ignore ECC errors when checking for BBM */
+ if (ret && !mtd_is_bitflip_or_eccerr(ret))
return ret;
for (j = 0; j < len; j++, buf += scanlen) {
return 0;
}
-/*
- * Scan a given block partially
- */
+/* Scan a given block partially */
static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd,
loff_t offs, uint8_t *buf, int len)
{
ops.oobbuf = buf;
ops.ooboffs = 0;
ops.datbuf = NULL;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
for (j = 0; j < len; j++) {
/*
- * Read the full oob until read_oob is fixed to
- * handle single byte reads for 16 bit
- * buswidth
+ * Read the full oob until read_oob is fixed to handle single
+ * byte reads for 16 bit buswidth.
*/
ret = mtd->read_oob(mtd, offs, &ops);
- if (ret)
+ /* Ignore ECC errors when checking for BBM */
+ if (ret && !mtd_is_bitflip_or_eccerr(ret))
return ret;
if (check_short_pattern(buf, bd))
/**
* create_bbt - [GENERIC] Create a bad block table by scanning the device
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @bd: descriptor for the good/bad block search pattern
- * @chip: create the table for a specific chip, -1 read all chips.
- * Applies only if NAND_BBT_PERCHIP option is set
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @bd: descriptor for the good/bad block search pattern
+ * @chip: create the table for a specific chip, -1 read all chips; applies only
+ * if NAND_BBT_PERCHIP option is set
*
- * Create a bad block table by scanning the device
- * for the given good/bad block identify pattern
+ * Create a bad block table by scanning the device for the given good/bad block
+ * identify pattern.
*/
static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
struct nand_bbt_descr *bd, int chip)
loff_t from;
size_t readlen;
- printk(KERN_INFO "Scanning device for bad blocks\n");
+ pr_info("Scanning device for bad blocks\n");
if (bd->options & NAND_BBT_SCANALLPAGES)
len = 1 << (this->bbt_erase_shift - this->page_shift);
}
if (chip == -1) {
- /* Note that numblocks is 2 * (real numblocks) here, see i+=2
- * below as it makes shifting and masking less painful */
+ /*
+ * Note that numblocks is 2 * (real numblocks) here, see i+=2
+ * below as it makes shifting and masking less painful
+ */
numblocks = mtd->size >> (this->bbt_erase_shift - 1);
startblock = 0;
from = 0;
} else {
if (chip >= this->numchips) {
- printk(KERN_WARNING "create_bbt(): chipnr (%d) > available chips (%d)\n",
+ pr_warn("create_bbt(): chipnr (%d) > available chips (%d)\n",
chip + 1, this->numchips);
return -EINVAL;
}
from = (loff_t)startblock << (this->bbt_erase_shift - 1);
}
- if (this->options & NAND_BBT_SCANLASTPAGE)
+ if (this->bbt_options & NAND_BBT_SCANLASTPAGE)
from += mtd->erasesize - (mtd->writesize * len);
for (i = startblock; i < numblocks;) {
if (ret) {
this->bbt[i >> 3] |= 0x03 << (i & 0x6);
- printk(KERN_WARNING "Bad eraseblock %d at 0x%012llx\n",
- i >> 1, (unsigned long long)from);
+ pr_warn("Bad eraseblock %d at 0x%012llx\n",
+ i >> 1, (unsigned long long)from);
mtd->ecc_stats.badblocks++;
}
/**
* search_bbt - [GENERIC] scan the device for a specific bad block table
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @td: descriptor for the bad block table
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
*
- * Read the bad block table by searching for a given ident pattern.
- * Search is preformed either from the beginning up or from the end of
- * the device downwards. The search starts always at the start of a
- * block.
- * If the option NAND_BBT_PERCHIP is given, each chip is searched
- * for a bbt, which contains the bad block information of this chip.
- * This is necessary to provide support for certain DOC devices.
+ * Read the bad block table by searching for a given ident pattern. Search is
+ * preformed either from the beginning up or from the end of the device
+ * downwards. The search starts always at the start of a block. If the option
+ * NAND_BBT_PERCHIP is given, each chip is searched for a bbt, which contains
+ * the bad block information of this chip. This is necessary to provide support
+ * for certain DOC devices.
*
- * The bbt ident pattern resides in the oob area of the first page
- * in a block.
+ * The bbt ident pattern resides in the oob area of the first page in a block.
*/
static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td)
{
int bbtblocks;
int blocktopage = this->bbt_erase_shift - this->page_shift;
- /* Search direction top -> down ? */
+ /* Search direction top -> down? */
if (td->options & NAND_BBT_LASTBLOCK) {
startblock = (mtd->size >> this->bbt_erase_shift) - 1;
dir = -1;
dir = 1;
}
- /* Do we have a bbt per chip ? */
+ /* Do we have a bbt per chip? */
if (td->options & NAND_BBT_PERCHIP) {
chips = this->numchips;
bbtblocks = this->chipsize >> this->bbt_erase_shift;
/* Check, if we found a bbt for each requested chip */
for (i = 0; i < chips; i++) {
if (td->pages[i] == -1)
- printk(KERN_WARNING "Bad block table not found for chip %d\n", i);
+ pr_warn("Bad block table not found for chip %d\n", i);
else
- printk(KERN_DEBUG "Bad block table found at page %d, version 0x%02X\n", td->pages[i],
- td->version[i]);
+ pr_info("Bad block table found at page %d, version "
+ "0x%02X\n", td->pages[i], td->version[i]);
}
return 0;
}
/**
* search_read_bbts - [GENERIC] scan the device for bad block table(s)
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @td: descriptor for the bad block table
- * @md: descriptor for the bad block table mirror
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
+ * @md: descriptor for the bad block table mirror
*
- * Search and read the bad block table(s)
-*/
+ * Search and read the bad block table(s).
+ */
static int search_read_bbts(struct mtd_info *mtd, uint8_t * buf, struct nand_bbt_descr *td, struct nand_bbt_descr *md)
{
/* Search the primary table */
/**
* write_bbt - [GENERIC] (Re)write the bad block table
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
+ * @md: descriptor for the bad block table mirror
+ * @chipsel: selector for a specific chip, -1 for all
*
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @td: descriptor for the bad block table
- * @md: descriptor for the bad block table mirror
- * @chipsel: selector for a specific chip, -1 for all
- *
- * (Re)write the bad block table
- *
-*/
+ * (Re)write the bad block table.
+ */
static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
struct nand_bbt_descr *td, struct nand_bbt_descr *md,
int chipsel)
ops.ooblen = mtd->oobsize;
ops.ooboffs = 0;
ops.datbuf = NULL;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
if (!rcode)
rcode = 0xff;
- /* Write bad block table per chip rather than per device ? */
+ /* Write bad block table per chip rather than per device? */
if (td->options & NAND_BBT_PERCHIP) {
numblocks = (int)(this->chipsize >> this->bbt_erase_shift);
- /* Full device write or specific chip ? */
+ /* Full device write or specific chip? */
if (chipsel == -1) {
nrchips = this->numchips;
} else {
/* Loop through the chips */
for (; chip < nrchips; chip++) {
-
- /* There was already a version of the table, reuse the page
+ /*
+ * There was already a version of the table, reuse the page
* This applies for absolute placement too, as we have the
* page nr. in td->pages.
*/
goto write;
}
- /* Automatic placement of the bad block table */
- /* Search direction top -> down ? */
+ /*
+ * Automatic placement of the bad block table. Search direction
+ * top -> down?
+ */
if (td->options & NAND_BBT_LASTBLOCK) {
startblock = numblocks * (chip + 1) - 1;
dir = -1;
if (!md || md->pages[chip] != page)
goto write;
}
- printk(KERN_ERR "No space left to write bad block table\n");
+ pr_err("No space left to write bad block table\n");
return -ENOSPC;
write:
bbtoffs = chip * (numblocks >> 2);
- to = ((loff_t) page) << this->page_shift;
+ to = ((loff_t)page) << this->page_shift;
- /* Must we save the block contents ? */
+ /* Must we save the block contents? */
if (td->options & NAND_BBT_SAVECONTENT) {
/* Make it block aligned */
- to &= ~((loff_t) ((1 << this->bbt_erase_shift) - 1));
+ to &= ~((loff_t)((1 << this->bbt_erase_shift) - 1));
len = 1 << this->bbt_erase_shift;
res = mtd->read(mtd, to, len, &retlen, buf);
if (res < 0) {
if (retlen != len) {
- printk(KERN_INFO "nand_bbt: Error "
- "reading block for writing "
- "the bad block table\n");
+ pr_info("nand_bbt: error reading block "
+ "for writing the bad block table\n");
return res;
}
- printk(KERN_WARNING "nand_bbt: ECC error "
- "while reading block for writing "
- "bad block table\n");
+ pr_warn("nand_bbt: ECC error while reading "
+ "block for writing bad block table\n");
}
/* Read oob data */
ops.ooblen = (len >> this->page_shift) * mtd->oobsize;
pageoffs = page - (int)(to >> this->page_shift);
offs = pageoffs << this->page_shift;
/* Preset the bbt area with 0xff */
- memset(&buf[offs], 0xff, (size_t) (numblocks >> sft));
+ memset(&buf[offs], 0xff, (size_t)(numblocks >> sft));
ooboffs = len + (pageoffs * mtd->oobsize);
} else if (td->options & NAND_BBT_NO_OOB) {
ooboffs = 0;
offs = td->len;
- /* the version byte */
+ /* The version byte */
if (td->options & NAND_BBT_VERSION)
offs++;
/* Calc length */
- len = (size_t) (numblocks >> sft);
+ len = (size_t)(numblocks >> sft);
len += offs;
- /* Make it page aligned ! */
+ /* Make it page aligned! */
len = ALIGN(len, mtd->writesize);
/* Preset the buffer with 0xff */
memset(buf, 0xff, len);
memcpy(buf, td->pattern, td->len);
} else {
/* Calc length */
- len = (size_t) (numblocks >> sft);
- /* Make it page aligned ! */
+ len = (size_t)(numblocks >> sft);
+ /* Make it page aligned! */
len = ALIGN(len, mtd->writesize);
/* Preset the buffer with 0xff */
memset(buf, 0xff, len +
if (td->options & NAND_BBT_VERSION)
buf[ooboffs + td->veroffs] = td->version[chip];
- /* walk through the memory table */
+ /* Walk through the memory table */
for (i = 0; i < numblocks;) {
uint8_t dat;
dat = this->bbt[bbtoffs + (i >> 2)];
for (j = 0; j < 4; j++, i++) {
int sftcnt = (i << (3 - sft)) & sftmsk;
- /* Do not store the reserved bbt blocks ! */
+ /* Do not store the reserved bbt blocks! */
buf[offs + (i >> sft)] &=
~(msk[dat & 0x03] << sftcnt);
dat >>= 2;
if (res < 0)
goto outerr;
- printk(KERN_DEBUG "Bad block table written to 0x%012llx, version "
- "0x%02X\n", (unsigned long long)to, td->version[chip]);
+ pr_info("Bad block table written to 0x%012llx, version 0x%02X\n",
+ (unsigned long long)to, td->version[chip]);
/* Mark it as used */
td->pages[chip] = page;
return 0;
outerr:
- printk(KERN_WARNING
- "nand_bbt: Error while writing bad block table %d\n", res);
+ pr_warn("nand_bbt: error while writing bad block table %d\n", res);
return res;
}
/**
* nand_memory_bbt - [GENERIC] create a memory based bad block table
- * @mtd: MTD device structure
- * @bd: descriptor for the good/bad block search pattern
+ * @mtd: MTD device structure
+ * @bd: descriptor for the good/bad block search pattern
*
- * The function creates a memory based bbt by scanning the device
- * for manufacturer / software marked good / bad blocks
-*/
+ * The function creates a memory based bbt by scanning the device for
+ * manufacturer / software marked good / bad blocks.
+ */
static inline int nand_memory_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
{
struct nand_chip *this = mtd->priv;
/**
* check_create - [GENERIC] create and write bbt(s) if necessary
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @bd: descriptor for the good/bad block search pattern
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @bd: descriptor for the good/bad block search pattern
*
- * The function checks the results of the previous call to read_bbt
- * and creates / updates the bbt(s) if necessary
- * Creation is necessary if no bbt was found for the chip/device
- * Update is necessary if one of the tables is missing or the
- * version nr. of one table is less than the other
-*/
+ * The function checks the results of the previous call to read_bbt and creates
+ * / updates the bbt(s) if necessary. Creation is necessary if no bbt was found
+ * for the chip/device. Update is necessary if one of the tables is missing or
+ * the version nr. of one table is less than the other.
+ */
static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd)
{
- int i, chips, writeops, chipsel, res;
+ int i, chips, writeops, create, chipsel, res, res2;
struct nand_chip *this = mtd->priv;
struct nand_bbt_descr *td = this->bbt_td;
struct nand_bbt_descr *md = this->bbt_md;
struct nand_bbt_descr *rd, *rd2;
- /* Do we have a bbt per chip ? */
+ /* Do we have a bbt per chip? */
if (td->options & NAND_BBT_PERCHIP)
chips = this->numchips;
else
for (i = 0; i < chips; i++) {
writeops = 0;
+ create = 0;
rd = NULL;
rd2 = NULL;
- /* Per chip or per device ? */
+ res = res2 = 0;
+ /* Per chip or per device? */
chipsel = (td->options & NAND_BBT_PERCHIP) ? i : -1;
- /* Mirrored table available ? */
+ /* Mirrored table available? */
if (md) {
if (td->pages[i] == -1 && md->pages[i] == -1) {
+ create = 1;
writeops = 0x03;
- goto create;
- }
-
- if (td->pages[i] == -1) {
+ } else if (td->pages[i] == -1) {
rd = md;
- td->version[i] = md->version[i];
- writeops = 1;
- goto writecheck;
- }
-
- if (md->pages[i] == -1) {
+ writeops = 0x01;
+ } else if (md->pages[i] == -1) {
rd = td;
- md->version[i] = td->version[i];
- writeops = 2;
- goto writecheck;
- }
-
- if (td->version[i] == md->version[i]) {
+ writeops = 0x02;
+ } else if (td->version[i] == md->version[i]) {
rd = td;
if (!(td->options & NAND_BBT_VERSION))
rd2 = md;
- goto writecheck;
- }
-
- if (((int8_t) (td->version[i] - md->version[i])) > 0) {
+ } else if (((int8_t)(td->version[i] - md->version[i])) > 0) {
rd = td;
- md->version[i] = td->version[i];
- writeops = 2;
+ writeops = 0x02;
} else {
rd = md;
- td->version[i] = md->version[i];
- writeops = 1;
+ writeops = 0x01;
}
-
- goto writecheck;
-
} else {
if (td->pages[i] == -1) {
+ create = 1;
writeops = 0x01;
- goto create;
+ } else {
+ rd = td;
}
- rd = td;
- goto writecheck;
}
- create:
- /* Create the bad block table by scanning the device ? */
- if (!(td->options & NAND_BBT_CREATE))
- continue;
- /* Create the table in memory by scanning the chip(s) */
- if (!(this->options & NAND_CREATE_EMPTY_BBT))
- create_bbt(mtd, buf, bd, chipsel);
-
- td->version[i] = 1;
- if (md)
- md->version[i] = 1;
- writecheck:
- /* read back first ? */
- if (rd)
- read_abs_bbt(mtd, buf, rd, chipsel);
- /* If they weren't versioned, read both. */
- if (rd2)
- read_abs_bbt(mtd, buf, rd2, chipsel);
-
- /* Write the bad block table to the device ? */
+ if (create) {
+ /* Create the bad block table by scanning the device? */
+ if (!(td->options & NAND_BBT_CREATE))
+ continue;
+
+ /* Create the table in memory by scanning the chip(s) */
+ if (!(this->bbt_options & NAND_BBT_CREATE_EMPTY))
+ create_bbt(mtd, buf, bd, chipsel);
+
+ td->version[i] = 1;
+ if (md)
+ md->version[i] = 1;
+ }
+
+ /* Read back first? */
+ if (rd) {
+ res = read_abs_bbt(mtd, buf, rd, chipsel);
+ if (mtd_is_eccerr(res)) {
+ /* Mark table as invalid */
+ rd->pages[i] = -1;
+ rd->version[i] = 0;
+ i--;
+ continue;
+ }
+ }
+ /* If they weren't versioned, read both */
+ if (rd2) {
+ res2 = read_abs_bbt(mtd, buf, rd2, chipsel);
+ if (mtd_is_eccerr(res2)) {
+ /* Mark table as invalid */
+ rd2->pages[i] = -1;
+ rd2->version[i] = 0;
+ i--;
+ continue;
+ }
+ }
+
+ /* Scrub the flash table(s)? */
+ if (mtd_is_bitflip(res) || mtd_is_bitflip(res2))
+ writeops = 0x03;
+
+ /* Update version numbers before writing */
+ if (md) {
+ td->version[i] = max(td->version[i], md->version[i]);
+ md->version[i] = td->version[i];
+ }
+
+ /* Write the bad block table to the device? */
if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
res = write_bbt(mtd, buf, td, md, chipsel);
if (res < 0)
return res;
}
- /* Write the mirror bad block table to the device ? */
+ /* Write the mirror bad block table to the device? */
if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
res = write_bbt(mtd, buf, md, td, chipsel);
if (res < 0)
/**
* mark_bbt_regions - [GENERIC] mark the bad block table regions
- * @mtd: MTD device structure
- * @td: bad block table descriptor
+ * @mtd: MTD device structure
+ * @td: bad block table descriptor
*
- * The bad block table regions are marked as "bad" to prevent
- * accidental erasures / writes. The regions are identified by
- * the mark 0x02.
-*/
+ * The bad block table regions are marked as "bad" to prevent accidental
+ * erasures / writes. The regions are identified by the mark 0x02.
+ */
static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td)
{
struct nand_chip *this = mtd->priv;
int i, j, chips, block, nrblocks, update;
uint8_t oldval, newval;
- /* Do we have a bbt per chip ? */
+ /* Do we have a bbt per chip? */
if (td->options & NAND_BBT_PERCHIP) {
chips = this->numchips;
nrblocks = (int)(this->chipsize >> this->bbt_erase_shift);
update = 1;
block += 2;
}
- /* If we want reserved blocks to be recorded to flash, and some
- new ones have been marked, then we need to update the stored
- bbts. This should only happen once. */
+ /*
+ * If we want reserved blocks to be recorded to flash, and some
+ * new ones have been marked, then we need to update the stored
+ * bbts. This should only happen once.
+ */
if (update && td->reserved_block_code)
nand_update_bbt(mtd, (loff_t)(block - 2) << (this->bbt_erase_shift - 1));
}
/**
* verify_bbt_descr - verify the bad block description
- * @mtd: MTD device structure
- * @bd: the table to verify
+ * @mtd: MTD device structure
+ * @bd: the table to verify
*
* This functions performs a few sanity checks on the bad block description
* table.
pattern_len = bd->len;
bits = bd->options & NAND_BBT_NRBITS_MSK;
- BUG_ON((this->options & NAND_USE_FLASH_BBT_NO_OOB) &&
- !(this->options & NAND_USE_FLASH_BBT));
+ BUG_ON((this->bbt_options & NAND_BBT_NO_OOB) &&
+ !(this->bbt_options & NAND_BBT_USE_FLASH));
BUG_ON(!bits);
if (bd->options & NAND_BBT_VERSION)
pattern_len++;
if (bd->options & NAND_BBT_NO_OOB) {
- BUG_ON(!(this->options & NAND_USE_FLASH_BBT));
- BUG_ON(!(this->options & NAND_USE_FLASH_BBT_NO_OOB));
+ BUG_ON(!(this->bbt_options & NAND_BBT_USE_FLASH));
+ BUG_ON(!(this->bbt_options & NAND_BBT_NO_OOB));
BUG_ON(bd->offs);
if (bd->options & NAND_BBT_VERSION)
BUG_ON(bd->veroffs != bd->len);
/**
* nand_scan_bbt - [NAND Interface] scan, find, read and maybe create bad block table(s)
- * @mtd: MTD device structure
- * @bd: descriptor for the good/bad block search pattern
- *
- * The function checks, if a bad block table(s) is/are already
- * available. If not it scans the device for manufacturer
- * marked good / bad blocks and writes the bad block table(s) to
- * the selected place.
+ * @mtd: MTD device structure
+ * @bd: descriptor for the good/bad block search pattern
*
- * The bad block table memory is allocated here. It must be freed
- * by calling the nand_free_bbt function.
+ * The function checks, if a bad block table(s) is/are already available. If
+ * not it scans the device for manufacturer marked good / bad blocks and writes
+ * the bad block table(s) to the selected place.
*
-*/
+ * The bad block table memory is allocated here. It must be freed by calling
+ * the nand_free_bbt function.
+ */
int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
{
struct nand_chip *this = mtd->priv;
struct nand_bbt_descr *md = this->bbt_md;
len = mtd->size >> (this->bbt_erase_shift + 2);
- /* Allocate memory (2bit per block) and clear the memory bad block table */
+ /*
+ * Allocate memory (2bit per block) and clear the memory bad block
+ * table.
+ */
this->bbt = kzalloc(len, GFP_KERNEL);
- if (!this->bbt) {
- printk(KERN_ERR "nand_scan_bbt: Out of memory\n");
+ if (!this->bbt)
return -ENOMEM;
- }
- /* If no primary table decriptor is given, scan the device
- * to build a memory based bad block table
+ /*
+ * If no primary table decriptor is given, scan the device to build a
+ * memory based bad block table.
*/
if (!td) {
if ((res = nand_memory_bbt(mtd, bd))) {
- printk(KERN_ERR "nand_bbt: Can't scan flash and build the RAM-based BBT\n");
+ pr_err("nand_bbt: can't scan flash and build the RAM-based BBT\n");
kfree(this->bbt);
this->bbt = NULL;
}
len += (len >> this->page_shift) * mtd->oobsize;
buf = vmalloc(len);
if (!buf) {
- printk(KERN_ERR "nand_bbt: Out of memory\n");
kfree(this->bbt);
this->bbt = NULL;
return -ENOMEM;
}
- /* Is the bbt at a given page ? */
+ /* Is the bbt at a given page? */
if (td->options & NAND_BBT_ABSPAGE) {
res = read_abs_bbts(mtd, buf, td, md);
} else {
/**
* nand_update_bbt - [NAND Interface] update bad block table(s)
- * @mtd: MTD device structure
- * @offs: the offset of the newly marked block
+ * @mtd: MTD device structure
+ * @offs: the offset of the newly marked block
*
- * The function updates the bad block table(s)
-*/
+ * The function updates the bad block table(s).
+ */
int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
{
struct nand_chip *this = mtd->priv;
- int len, res = 0, writeops = 0;
+ int len, res = 0;
int chip, chipsel;
uint8_t *buf;
struct nand_bbt_descr *td = this->bbt_td;
len = (1 << this->bbt_erase_shift);
len += (len >> this->page_shift) * mtd->oobsize;
buf = kmalloc(len, GFP_KERNEL);
- if (!buf) {
- printk(KERN_ERR "nand_update_bbt: Out of memory\n");
+ if (!buf)
return -ENOMEM;
- }
-
- writeops = md != NULL ? 0x03 : 0x01;
- /* Do we have a bbt per chip ? */
+ /* Do we have a bbt per chip? */
if (td->options & NAND_BBT_PERCHIP) {
chip = (int)(offs >> this->chip_shift);
chipsel = chip;
if (md)
md->version[chip]++;
- /* Write the bad block table to the device ? */
- if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
+ /* Write the bad block table to the device? */
+ if (td->options & NAND_BBT_WRITE) {
res = write_bbt(mtd, buf, td, md, chipsel);
if (res < 0)
goto out;
}
- /* Write the mirror bad block table to the device ? */
- if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
+ /* Write the mirror bad block table to the device? */
+ if (md && (md->options & NAND_BBT_WRITE)) {
res = write_bbt(mtd, buf, md, td, chipsel);
}
return res;
}
-/* Define some generic bad / good block scan pattern which are used
- * while scanning a device for factory marked good / bad blocks. */
+/*
+ * Define some generic bad / good block scan pattern which are used
+ * while scanning a device for factory marked good / bad blocks.
+ */
static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
static uint8_t scan_agand_pattern[] = { 0x1C, 0x71, 0xC7, 0x1C, 0x71, 0xC7 };
.pattern = scan_agand_pattern
};
-/* Generic flash bbt decriptors
-*/
+/* Generic flash bbt descriptors */
static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' };
.pattern = mirror_pattern
};
-#define BBT_SCAN_OPTIONS (NAND_BBT_SCANLASTPAGE | NAND_BBT_SCAN2NDPAGE | \
- NAND_BBT_SCANBYTE1AND6)
+#define BADBLOCK_SCAN_MASK (~NAND_BBT_NO_OOB)
/**
- * nand_create_default_bbt_descr - [Internal] Creates a BBT descriptor structure
- * @this: NAND chip to create descriptor for
+ * nand_create_badblock_pattern - [INTERN] Creates a BBT descriptor structure
+ * @this: NAND chip to create descriptor for
*
* This function allocates and initializes a nand_bbt_descr for BBM detection
- * based on the properties of "this". The new descriptor is stored in
+ * based on the properties of @this. The new descriptor is stored in
* this->badblock_pattern. Thus, this->badblock_pattern should be NULL when
* passed to this function.
- *
*/
-static int nand_create_default_bbt_descr(struct nand_chip *this)
+static int nand_create_badblock_pattern(struct nand_chip *this)
{
struct nand_bbt_descr *bd;
if (this->badblock_pattern) {
- printk(KERN_WARNING "BBT descr already allocated; not replacing.\n");
+ pr_warn("Bad block pattern already allocated; not replacing\n");
return -EINVAL;
}
bd = kzalloc(sizeof(*bd), GFP_KERNEL);
- if (!bd) {
- printk(KERN_ERR "nand_create_default_bbt_descr: Out of memory\n");
+ if (!bd)
return -ENOMEM;
- }
- bd->options = this->options & BBT_SCAN_OPTIONS;
+ bd->options = this->bbt_options & BADBLOCK_SCAN_MASK;
bd->offs = this->badblockpos;
bd->len = (this->options & NAND_BUSWIDTH_16) ? 2 : 1;
bd->pattern = scan_ff_pattern;
/**
* nand_default_bbt - [NAND Interface] Select a default bad block table for the device
- * @mtd: MTD device structure
- *
- * This function selects the default bad block table
- * support for the device and calls the nand_scan_bbt function
+ * @mtd: MTD device structure
*
-*/
+ * This function selects the default bad block table support for the device and
+ * calls the nand_scan_bbt function.
+ */
int nand_default_bbt(struct mtd_info *mtd)
{
struct nand_chip *this = mtd->priv;
- /* Default for AG-AND. We must use a flash based
- * bad block table as the devices have factory marked
- * _good_ blocks. Erasing those blocks leads to loss
- * of the good / bad information, so we _must_ store
- * this information in a good / bad table during
- * startup
+ /*
+ * Default for AG-AND. We must use a flash based bad block table as the
+ * devices have factory marked _good_ blocks. Erasing those blocks
+ * leads to loss of the good / bad information, so we _must_ store this
+ * information in a good / bad table during startup.
*/
if (this->options & NAND_IS_AND) {
/* Use the default pattern descriptors */
this->bbt_td = &bbt_main_descr;
this->bbt_md = &bbt_mirror_descr;
}
- this->options |= NAND_USE_FLASH_BBT;
+ this->bbt_options |= NAND_BBT_USE_FLASH;
return nand_scan_bbt(mtd, &agand_flashbased);
}
- /* Is a flash based bad block table requested ? */
- if (this->options & NAND_USE_FLASH_BBT) {
+ /* Is a flash based bad block table requested? */
+ if (this->bbt_options & NAND_BBT_USE_FLASH) {
/* Use the default pattern descriptors */
if (!this->bbt_td) {
- if (this->options & NAND_USE_FLASH_BBT_NO_OOB) {
+ if (this->bbt_options & NAND_BBT_NO_OOB) {
this->bbt_td = &bbt_main_no_bbt_descr;
this->bbt_md = &bbt_mirror_no_bbt_descr;
} else {
}
if (!this->badblock_pattern)
- nand_create_default_bbt_descr(this);
+ nand_create_badblock_pattern(this);
return nand_scan_bbt(mtd, this->badblock_pattern);
}
/**
* nand_isbad_bbt - [NAND Interface] Check if a block is bad
- * @mtd: MTD device structure
- * @offs: offset in the device
- * @allowbbt: allow access to bad block table region
- *
-*/
+ * @mtd: MTD device structure
+ * @offs: offset in the device
+ * @allowbbt: allow access to bad block table region
+ */
int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
{
struct nand_chip *this = mtd->priv;
block = (int)(offs >> (this->bbt_erase_shift - 1));
res = (this->bbt[block >> 3] >> (block & 0x06)) & 0x03;
- DEBUG(MTD_DEBUG_LEVEL2, "nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n",
- (unsigned int)offs, block >> 1, res);
+ pr_debug("nand_isbad_bbt(): bbt info for offs 0x%08x: "
+ "(block %d) 0x%02x\n",
+ (unsigned int)offs, block >> 1, res);
switch ((int)res) {
case 0x00:
buf[errloc[i] >> 3] ^= (1 << (errloc[i] & 7));
/* else error in ecc, no action needed */
- DEBUG(MTD_DEBUG_LEVEL0, "%s: corrected bitflip %u\n",
- __func__, errloc[i]);
+ pr_debug("%s: corrected bitflip %u\n", __func__,
+ errloc[i]);
}
} else if (count < 0) {
printk(KERN_ERR "ecc unrecoverable error\n");
/*
* addressbits is a lookup table to filter out the bits from the xor-ed
- * ecc data that identify the faulty location.
+ * ECC data that identify the faulty location.
* this is only used for repairing parity
* see the comments in nand_correct_data for more details
*/
* __nand_calculate_ecc - [NAND Interface] Calculate 3-byte ECC for 256/512-byte
* block
* @buf: input buffer with raw data
- * @eccsize: data bytes per ecc step (256 or 512)
+ * @eccsize: data bytes per ECC step (256 or 512)
* @code: output buffer with ECC
*/
void __nand_calculate_ecc(const unsigned char *buf, unsigned int eccsize,
rp17 = (par ^ rp16) & 0xff;
/*
- * Finally calculate the ecc bits.
+ * Finally calculate the ECC bits.
* Again here it might seem that there are performance optimisations
* possible, but benchmarks showed that on the system this is developed
* the code below is the fastest
* @buf: raw data read from the chip
* @read_ecc: ECC from the chip
* @calc_ecc: the ECC calculated from raw data
- * @eccsize: data bytes per ecc step (256 or 512)
+ * @eccsize: data bytes per ECC step (256 or 512)
*
* Detect and correct a 1 bit error for eccsize byte block
*/
}
/* count nr of bits; use table lookup, faster than calculating it */
if ((bitsperbyte[b0] + bitsperbyte[b1] + bitsperbyte[b2]) == 1)
- return 1; /* error in ecc data; no action needed */
+ return 1; /* error in ECC data; no action needed */
printk(KERN_ERR "uncorrectable error : ");
return -1;
switch (bbt) {
case 2:
- chip->options |= NAND_USE_FLASH_BBT_NO_OOB;
+ chip->bbt_options |= NAND_BBT_NO_OOB;
case 1:
- chip->options |= NAND_USE_FLASH_BBT;
+ chip->bbt_options |= NAND_BBT_USE_FLASH;
case 0:
break;
default:
struct nand_chip chip;
int chip_select;
struct nand_hw_control ndfc_control;
- struct mtd_partition *parts;
};
static struct ndfc_controller ndfc_ctrl[NDFC_MAX_CS];
static int ndfc_chip_init(struct ndfc_controller *ndfc,
struct device_node *node)
{
-#ifdef CONFIG_MTD_CMDLINE_PARTS
- static const char *part_types[] = { "cmdlinepart", NULL };
-#else
- static const char *part_types[] = { NULL };
-#endif
struct device_node *flash_np;
struct nand_chip *chip = &ndfc->chip;
+ struct mtd_part_parser_data ppdata;
int ret;
chip->IO_ADDR_R = ndfc->ndfcbase + NDFC_DATA;
if (!flash_np)
return -ENODEV;
+ ppdata->of_node = flash_np;
ndfc->mtd.name = kasprintf(GFP_KERNEL, "%s.%s",
dev_name(&ndfc->ofdev->dev), flash_np->name);
if (!ndfc->mtd.name) {
if (ret)
goto err;
- ret = parse_mtd_partitions(&ndfc->mtd, part_types, &ndfc->parts, 0);
- if (ret < 0)
- goto err;
-
- if (ret == 0) {
- ret = of_mtd_parse_partitions(&ndfc->ofdev->dev, flash_np,
- &ndfc->parts);
- if (ret < 0)
- goto err;
- }
-
- ret = mtd_device_register(&ndfc->mtd, ndfc->parts, ret);
+ ret = mtd_device_parse_register(&ndfc->mtd, NULL, &ppdata, NULL, 0);
err:
of_node_put(flash_np);
struct ndfc_controller *ndfc = dev_get_drvdata(&ofdev->dev);
nand_release(&ndfc->mtd);
+ kfree(ndfc->mtd.name);
return 0;
}
pdata->exit();
if (host) {
+ nand_release(&host->mtd);
iounmap(host->cmd_va);
iounmap(host->data_va);
iounmap(host->addr_va);
struct nuc900_nand *nuc900_nand = platform_get_drvdata(pdev);
struct resource *res;
+ nand_release(&nuc900_nand->mtd);
iounmap(nuc900_nand->reg);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
+#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/jiffies.h>
#include <linux/sched.h>
#define P4e_s(a) (TF(a & NAND_Ecc_P4e) << 0)
#define P4o_s(a) (TF(a & NAND_Ecc_P4o) << 1)
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
/* oob info generated runtime depending on ecc algorithm and layout selected */
static struct nand_ecclayout omap_oobinfo;
/* Define some generic bad / good block scan pattern which are used
struct nand_hw_control controller;
struct omap_nand_platform_data *pdata;
struct mtd_info mtd;
- struct mtd_partition *parts;
struct nand_chip nand;
struct platform_device *pdev;
case 1:
/* Uncorrectable error */
- DEBUG(MTD_DEBUG_LEVEL0, "ECC UNCORRECTED_ERROR 1\n");
+ pr_debug("ECC UNCORRECTED_ERROR 1\n");
return -1;
case 11:
/* UN-Correctable error */
- DEBUG(MTD_DEBUG_LEVEL0, "ECC UNCORRECTED_ERROR B\n");
+ pr_debug("ECC UNCORRECTED_ERROR B\n");
return -1;
case 12:
find_bit = (ecc_bit[5] << 2) + (ecc_bit[3] << 1) + ecc_bit[1];
- DEBUG(MTD_DEBUG_LEVEL0, "Correcting single bit ECC error at "
- "offset: %d, bit: %d\n", find_byte, find_bit);
+ pr_debug("Correcting single bit ECC error at offset: "
+ "%d, bit: %d\n", find_byte, find_bit);
page_data[find_byte] ^= (1 << find_bit);
ecc_data2[2] == 0)
return 0;
}
- DEBUG(MTD_DEBUG_LEVEL0, "UNCORRECTED_ERROR default\n");
+ pr_debug("UNCORRECTED_ERROR default\n");
return -1;
}
}
goto out_release_mem_region;
}
- err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0);
- if (err > 0)
- mtd_device_register(&info->mtd, info->parts, err);
- else if (pdata->parts)
- mtd_device_register(&info->mtd, pdata->parts, pdata->nr_parts);
- else
- mtd_device_register(&info->mtd, NULL, 0);
+ mtd_device_parse_register(&info->mtd, NULL, 0,
+ pdata->parts, pdata->nr_parts);
platform_set_drvdata(pdev, &info->mtd);
#include <mach/hardware.h>
#include <plat/orion_nand.h>
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
static void orion_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *nc = mtd->priv;
struct resource *res;
void __iomem *io_base;
int ret = 0;
- struct mtd_partition *partitions = NULL;
- int num_part = 0;
nc = kzalloc(sizeof(struct nand_chip) + sizeof(struct mtd_info), GFP_KERNEL);
if (!nc) {
goto no_dev;
}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
mtd->name = "orion_nand";
- num_part = parse_mtd_partitions(mtd, part_probes, &partitions, 0);
-#endif
- /* If cmdline partitions have been passed, let them be used */
- if (num_part <= 0) {
- num_part = board->nr_parts;
- partitions = board->parts;
- }
-
- ret = mtd_device_register(mtd, partitions, num_part);
+ ret = mtd_device_parse_register(mtd, NULL, 0,
+ board->parts, board->nr_parts);
if (ret) {
nand_release(mtd);
goto no_dev;
chip->ecc.mode = NAND_ECC_SOFT;
/* Enable the following for a flash based bad block table */
- chip->options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR;
+ chip->options = NAND_NO_AUTOINCR;
+ chip->bbt_options = NAND_BBT_USE_FLASH;
/* Scan to find existence of the device */
if (nand_scan(pasemi_nand_mtd, 1)) {
struct nand_chip chip;
struct mtd_info mtd;
void __iomem *io_base;
- int nr_parts;
- struct mtd_partition *parts;
};
/*
data->chip.read_buf = pdata->ctrl.read_buf;
data->chip.chip_delay = pdata->chip.chip_delay;
data->chip.options |= pdata->chip.options;
+ data->chip.bbt_options |= pdata->chip.bbt_options;
data->chip.ecc.hwctl = pdata->ctrl.hwcontrol;
data->chip.ecc.layout = pdata->chip.ecclayout;
goto out;
}
- if (pdata->chip.part_probe_types) {
- err = parse_mtd_partitions(&data->mtd,
- pdata->chip.part_probe_types,
- &data->parts, 0);
- if (err > 0) {
- mtd_device_register(&data->mtd, data->parts, err);
- return 0;
- }
- }
- if (pdata->chip.set_parts)
- pdata->chip.set_parts(data->mtd.size, &pdata->chip);
- if (pdata->chip.partitions) {
- data->parts = pdata->chip.partitions;
- err = mtd_device_register(&data->mtd, data->parts,
- pdata->chip.nr_partitions);
- } else
- err = mtd_device_register(&data->mtd, NULL, 0);
+ err = mtd_device_parse_register(&data->mtd,
+ pdata->chip.part_probe_types, 0,
+ pdata->chip.partitions, pdata->chip.nr_partitions);
if (!err)
return err;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
nand_release(&data->mtd);
- if (data->parts && data->parts != pdata->chip.partitions)
- kfree(data->parts);
if (pdata->ctrl.remove)
pdata->ctrl.remove(pdev);
iounmap(data->io_base);
#define NUM_PARTITIONS 1
-extern int parse_cmdline_partitions(struct mtd_info *master, struct mtd_partition **pparts, const char *mtd_id);
-
/*
* hardware specific access to control-lines
*/
}
#endif
-const char *part_probes[] = { "cmdlinepart", NULL };
-const char *part_probes_evb[] = { "cmdlinepart", NULL };
-
/*
* Main initialization routine
*/
static int __init ppchameleonevb_init(void)
{
struct nand_chip *this;
- const char *part_type = 0;
- int mtd_parts_nb = 0;
- struct mtd_partition *mtd_parts = 0;
void __iomem *ppchameleon_fio_base;
void __iomem *ppchameleonevb_fio_base;
#endif
ppchameleon_mtd->name = "ppchameleon-nand";
- mtd_parts_nb = parse_mtd_partitions(ppchameleon_mtd, part_probes, &mtd_parts, 0);
- if (mtd_parts_nb > 0)
- part_type = "command line";
- else
- mtd_parts_nb = 0;
-
- if (mtd_parts_nb == 0) {
- if (ppchameleon_mtd->size == NAND_SMALL_SIZE)
- mtd_parts = partition_info_me;
- else
- mtd_parts = partition_info_hi;
- mtd_parts_nb = NUM_PARTITIONS;
- part_type = "static";
- }
/* Register the partitions */
- printk(KERN_NOTICE "Using %s partition definition\n", part_type);
- mtd_device_register(ppchameleon_mtd, mtd_parts, mtd_parts_nb);
+ mtd_device_parse_register(ppchameleon_mtd, NULL, 0,
+ ppchameleon_mtd->size == NAND_SMALL_SIZE ?
+ partition_info_me :
+ partition_info_hi,
+ NUM_PARTITIONS);
nand_evb_init:
/****************************
}
ppchameleonevb_mtd->name = NAND_EVB_MTD_NAME;
- mtd_parts_nb = parse_mtd_partitions(ppchameleonevb_mtd, part_probes_evb, &mtd_parts, 0);
- if (mtd_parts_nb > 0)
- part_type = "command line";
- else
- mtd_parts_nb = 0;
-
- if (mtd_parts_nb == 0) {
- mtd_parts = partition_info_evb;
- mtd_parts_nb = NUM_PARTITIONS;
- part_type = "static";
- }
/* Register the partitions */
- printk(KERN_NOTICE "Using %s partition definition\n", part_type);
- mtd_device_register(ppchameleonevb_mtd, mtd_parts, mtd_parts_nb);
+ mtd_device_parse_register(ppchameleonevb_mtd, NULL, 0,
+ ppchameleon_mtd->size == NAND_SMALL_SIZE ?
+ partition_info_me :
+ partition_info_hi,
+ NUM_PARTITIONS);
/* Return happy */
return 0;
enum {
STATE_IDLE = 0,
+ STATE_PREPARED,
STATE_CMD_HANDLE,
STATE_DMA_READING,
STATE_DMA_WRITING,
STATE_READY,
};
-struct pxa3xx_nand_info {
- struct nand_chip nand_chip;
+struct pxa3xx_nand_host {
+ struct nand_chip chip;
+ struct pxa3xx_nand_cmdset *cmdset;
+ struct mtd_info *mtd;
+ void *info_data;
+
+ /* page size of attached chip */
+ unsigned int page_size;
+ int use_ecc;
+ int cs;
+ /* calculated from pxa3xx_nand_flash data */
+ unsigned int col_addr_cycles;
+ unsigned int row_addr_cycles;
+ size_t read_id_bytes;
+
+ /* cached register value */
+ uint32_t reg_ndcr;
+ uint32_t ndtr0cs0;
+ uint32_t ndtr1cs0;
+};
+
+struct pxa3xx_nand_info {
struct nand_hw_control controller;
struct platform_device *pdev;
- struct pxa3xx_nand_cmdset *cmdset;
struct clk *clk;
void __iomem *mmio_base;
unsigned long mmio_phys;
+ struct completion cmd_complete;
unsigned int buf_start;
unsigned int buf_count;
- struct mtd_info *mtd;
/* DMA information */
int drcmr_dat;
int drcmr_cmd;
unsigned char *data_buff;
unsigned char *oob_buff;
dma_addr_t data_buff_phys;
- size_t data_buff_size;
int data_dma_ch;
struct pxa_dma_desc *data_desc;
dma_addr_t data_desc_addr;
- uint32_t reg_ndcr;
-
- /* saved column/page_addr during CMD_SEQIN */
- int seqin_column;
- int seqin_page_addr;
-
- /* relate to the command */
+ struct pxa3xx_nand_host *host[NUM_CHIP_SELECT];
unsigned int state;
+ int cs;
int use_ecc; /* use HW ECC ? */
int use_dma; /* use DMA ? */
int is_ready;
unsigned int page_size; /* page size of attached chip */
unsigned int data_size; /* data size in FIFO */
+ unsigned int oob_size;
int retcode;
- struct completion cmd_complete;
/* generated NDCBx register values */
uint32_t ndcb0;
uint32_t ndcb1;
uint32_t ndcb2;
-
- /* timing calcuted from setting */
- uint32_t ndtr0cs0;
- uint32_t ndtr1cs0;
-
- /* calculated from pxa3xx_nand_flash data */
- size_t oob_size;
- size_t read_id_bytes;
-
- unsigned int col_addr_cycles;
- unsigned int row_addr_cycles;
};
static int use_dma = 1;
/* Define a default flash type setting serve as flash detecting only */
#define DEFAULT_FLASH_TYPE (&builtin_flash_types[0])
-const char *mtd_names[] = {"pxa3xx_nand-0", NULL};
+const char *mtd_names[] = {"pxa3xx_nand-0", "pxa3xx_nand-1", NULL};
#define NDTR0_tCH(c) (min((c), 7) << 19)
#define NDTR0_tCS(c) (min((c), 7) << 16)
/* convert nano-seconds to nand flash controller clock cycles */
#define ns2cycle(ns, clk) (int)((ns) * (clk / 1000000) / 1000)
-static void pxa3xx_nand_set_timing(struct pxa3xx_nand_info *info,
+static void pxa3xx_nand_set_timing(struct pxa3xx_nand_host *host,
const struct pxa3xx_nand_timing *t)
{
+ struct pxa3xx_nand_info *info = host->info_data;
unsigned long nand_clk = clk_get_rate(info->clk);
uint32_t ndtr0, ndtr1;
NDTR1_tWHR(ns2cycle(t->tWHR, nand_clk)) |
NDTR1_tAR(ns2cycle(t->tAR, nand_clk));
- info->ndtr0cs0 = ndtr0;
- info->ndtr1cs0 = ndtr1;
+ host->ndtr0cs0 = ndtr0;
+ host->ndtr1cs0 = ndtr1;
nand_writel(info, NDTR0CS0, ndtr0);
nand_writel(info, NDTR1CS0, ndtr1);
}
static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info)
{
- int oob_enable = info->reg_ndcr & NDCR_SPARE_EN;
+ struct pxa3xx_nand_host *host = info->host[info->cs];
+ int oob_enable = host->reg_ndcr & NDCR_SPARE_EN;
- info->data_size = info->page_size;
+ info->data_size = host->page_size;
if (!oob_enable) {
info->oob_size = 0;
return;
}
- switch (info->page_size) {
+ switch (host->page_size) {
case 2048:
info->oob_size = (info->use_ecc) ? 40 : 64;
break;
*/
static void pxa3xx_nand_start(struct pxa3xx_nand_info *info)
{
+ struct pxa3xx_nand_host *host = info->host[info->cs];
uint32_t ndcr;
- ndcr = info->reg_ndcr;
+ ndcr = host->reg_ndcr;
ndcr |= info->use_ecc ? NDCR_ECC_EN : 0;
ndcr |= info->use_dma ? NDCR_DMA_EN : 0;
ndcr |= NDCR_ND_RUN;
DIV_ROUND_UP(info->oob_size, 4));
break;
default:
- printk(KERN_ERR "%s: invalid state %d\n", __func__,
+ dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__,
info->state);
BUG();
}
desc->dcmd |= DCMD_INCTRGADDR | DCMD_FLOWSRC;
break;
default:
- printk(KERN_ERR "%s: invalid state %d\n", __func__,
+ dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__,
info->state);
BUG();
}
{
struct pxa3xx_nand_info *info = devid;
unsigned int status, is_completed = 0;
+ unsigned int ready, cmd_done;
+
+ if (info->cs == 0) {
+ ready = NDSR_FLASH_RDY;
+ cmd_done = NDSR_CS0_CMDD;
+ } else {
+ ready = NDSR_RDY;
+ cmd_done = NDSR_CS1_CMDD;
+ }
status = nand_readl(info, NDSR);
handle_data_pio(info);
}
}
- if (status & NDSR_CS0_CMDD) {
+ if (status & cmd_done) {
info->state = STATE_CMD_DONE;
is_completed = 1;
}
- if (status & NDSR_FLASH_RDY) {
+ if (status & ready) {
info->is_ready = 1;
info->state = STATE_READY;
}
return IRQ_HANDLED;
}
-static int pxa3xx_nand_dev_ready(struct mtd_info *mtd)
-{
- struct pxa3xx_nand_info *info = mtd->priv;
- return (nand_readl(info, NDSR) & NDSR_RDY) ? 1 : 0;
-}
-
static inline int is_buf_blank(uint8_t *buf, size_t len)
{
for (; len > 0; len--)
uint16_t column, int page_addr)
{
uint16_t cmd;
- int addr_cycle, exec_cmd, ndcb0;
- struct mtd_info *mtd = info->mtd;
+ int addr_cycle, exec_cmd;
+ struct pxa3xx_nand_host *host;
+ struct mtd_info *mtd;
- ndcb0 = 0;
+ host = info->host[info->cs];
+ mtd = host->mtd;
addr_cycle = 0;
exec_cmd = 1;
info->use_ecc = 0;
info->is_ready = 0;
info->retcode = ERR_NONE;
+ if (info->cs != 0)
+ info->ndcb0 = NDCB0_CSEL;
+ else
+ info->ndcb0 = 0;
switch (command) {
case NAND_CMD_READ0:
break;
}
- info->ndcb0 = ndcb0;
- addr_cycle = NDCB0_ADDR_CYC(info->row_addr_cycles
- + info->col_addr_cycles);
+ addr_cycle = NDCB0_ADDR_CYC(host->row_addr_cycles
+ + host->col_addr_cycles);
switch (command) {
case NAND_CMD_READOOB:
case NAND_CMD_READ0:
- cmd = info->cmdset->read1;
+ cmd = host->cmdset->read1;
if (command == NAND_CMD_READOOB)
info->buf_start = mtd->writesize + column;
else
info->buf_start = column;
- if (unlikely(info->page_size < PAGE_CHUNK_SIZE))
+ if (unlikely(host->page_size < PAGE_CHUNK_SIZE))
info->ndcb0 |= NDCB0_CMD_TYPE(0)
| addr_cycle
| (cmd & NDCB0_CMD1_MASK);
case NAND_CMD_SEQIN:
/* small page addr setting */
- if (unlikely(info->page_size < PAGE_CHUNK_SIZE)) {
+ if (unlikely(host->page_size < PAGE_CHUNK_SIZE)) {
info->ndcb1 = ((page_addr & 0xFFFFFF) << 8)
| (column & 0xFF);
break;
}
- cmd = info->cmdset->program;
+ cmd = host->cmdset->program;
info->ndcb0 |= NDCB0_CMD_TYPE(0x1)
| NDCB0_AUTO_RS
| NDCB0_ST_ROW_EN
break;
case NAND_CMD_READID:
- cmd = info->cmdset->read_id;
- info->buf_count = info->read_id_bytes;
+ cmd = host->cmdset->read_id;
+ info->buf_count = host->read_id_bytes;
info->ndcb0 |= NDCB0_CMD_TYPE(3)
| NDCB0_ADDR_CYC(1)
| cmd;
info->data_size = 8;
break;
case NAND_CMD_STATUS:
- cmd = info->cmdset->read_status;
+ cmd = host->cmdset->read_status;
info->buf_count = 1;
info->ndcb0 |= NDCB0_CMD_TYPE(4)
| NDCB0_ADDR_CYC(1)
break;
case NAND_CMD_ERASE1:
- cmd = info->cmdset->erase;
+ cmd = host->cmdset->erase;
info->ndcb0 |= NDCB0_CMD_TYPE(2)
| NDCB0_AUTO_RS
| NDCB0_ADDR_CYC(3)
break;
case NAND_CMD_RESET:
- cmd = info->cmdset->reset;
+ cmd = host->cmdset->reset;
info->ndcb0 |= NDCB0_CMD_TYPE(5)
| cmd;
default:
exec_cmd = 0;
- printk(KERN_ERR "pxa3xx-nand: non-supported"
- " command %x\n", command);
+ dev_err(&info->pdev->dev, "non-supported command %x\n",
+ command);
break;
}
static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
int column, int page_addr)
{
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
int ret, exec_cmd;
/*
* "byte" address into a "word" address appropriate
* for indexing a word-oriented device
*/
- if (info->reg_ndcr & NDCR_DWIDTH_M)
+ if (host->reg_ndcr & NDCR_DWIDTH_M)
column /= 2;
+ /*
+ * There may be different NAND chip hooked to
+ * different chip select, so check whether
+ * chip select has been changed, if yes, reset the timing
+ */
+ if (info->cs != host->cs) {
+ info->cs = host->cs;
+ nand_writel(info, NDTR0CS0, host->ndtr0cs0);
+ nand_writel(info, NDTR1CS0, host->ndtr1cs0);
+ }
+
+ info->state = STATE_PREPARED;
exec_cmd = prepare_command_pool(info, command, column, page_addr);
if (exec_cmd) {
init_completion(&info->cmd_complete);
ret = wait_for_completion_timeout(&info->cmd_complete,
CHIP_DELAY_TIMEOUT);
if (!ret) {
- printk(KERN_ERR "Wait time out!!!\n");
+ dev_err(&info->pdev->dev, "Wait time out!!!\n");
/* Stop State Machine for next command cycle */
pxa3xx_nand_stop(info);
}
- info->state = STATE_IDLE;
}
+ info->state = STATE_IDLE;
}
static void pxa3xx_nand_write_page_hwecc(struct mtd_info *mtd,
static int pxa3xx_nand_read_page_hwecc(struct mtd_info *mtd,
struct nand_chip *chip, uint8_t *buf, int page)
{
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
chip->read_buf(mtd, buf, mtd->writesize);
chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
* OOB, ignore such double bit errors
*/
if (is_buf_blank(buf, mtd->writesize))
+ info->retcode = ERR_NONE;
+ else
mtd->ecc_stats.failed++;
}
static uint8_t pxa3xx_nand_read_byte(struct mtd_info *mtd)
{
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
char retval = 0xFF;
if (info->buf_start < info->buf_count)
static u16 pxa3xx_nand_read_word(struct mtd_info *mtd)
{
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
u16 retval = 0xFFFF;
if (!(info->buf_start & 0x01) && info->buf_start < info->buf_count) {
static void pxa3xx_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
{
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
int real_len = min_t(size_t, len, info->buf_count - info->buf_start);
memcpy(buf, info->data_buff + info->buf_start, real_len);
static void pxa3xx_nand_write_buf(struct mtd_info *mtd,
const uint8_t *buf, int len)
{
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
int real_len = min_t(size_t, len, info->buf_count - info->buf_start);
memcpy(info->data_buff + info->buf_start, buf, real_len);
static int pxa3xx_nand_waitfunc(struct mtd_info *mtd, struct nand_chip *this)
{
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
/* pxa3xx_nand_send_command has waited for command complete */
if (this->state == FL_WRITING || this->state == FL_ERASING) {
{
struct platform_device *pdev = info->pdev;
struct pxa3xx_nand_platform_data *pdata = pdev->dev.platform_data;
+ struct pxa3xx_nand_host *host = info->host[info->cs];
uint32_t ndcr = 0x0; /* enable all interrupts */
- if (f->page_size != 2048 && f->page_size != 512)
+ if (f->page_size != 2048 && f->page_size != 512) {
+ dev_err(&pdev->dev, "Current only support 2048 and 512 size\n");
return -EINVAL;
+ }
- if (f->flash_width != 16 && f->flash_width != 8)
+ if (f->flash_width != 16 && f->flash_width != 8) {
+ dev_err(&pdev->dev, "Only support 8bit and 16 bit!\n");
return -EINVAL;
+ }
/* calculate flash information */
- info->cmdset = &default_cmdset;
- info->page_size = f->page_size;
- info->read_id_bytes = (f->page_size == 2048) ? 4 : 2;
+ host->cmdset = &default_cmdset;
+ host->page_size = f->page_size;
+ host->read_id_bytes = (f->page_size == 2048) ? 4 : 2;
/* calculate addressing information */
- info->col_addr_cycles = (f->page_size == 2048) ? 2 : 1;
+ host->col_addr_cycles = (f->page_size == 2048) ? 2 : 1;
if (f->num_blocks * f->page_per_block > 65536)
- info->row_addr_cycles = 3;
+ host->row_addr_cycles = 3;
else
- info->row_addr_cycles = 2;
+ host->row_addr_cycles = 2;
ndcr |= (pdata->enable_arbiter) ? NDCR_ND_ARB_EN : 0;
- ndcr |= (info->col_addr_cycles == 2) ? NDCR_RA_START : 0;
+ ndcr |= (host->col_addr_cycles == 2) ? NDCR_RA_START : 0;
ndcr |= (f->page_per_block == 64) ? NDCR_PG_PER_BLK : 0;
ndcr |= (f->page_size == 2048) ? NDCR_PAGE_SZ : 0;
ndcr |= (f->flash_width == 16) ? NDCR_DWIDTH_M : 0;
ndcr |= (f->dfc_width == 16) ? NDCR_DWIDTH_C : 0;
- ndcr |= NDCR_RD_ID_CNT(info->read_id_bytes);
+ ndcr |= NDCR_RD_ID_CNT(host->read_id_bytes);
ndcr |= NDCR_SPARE_EN; /* enable spare by default */
- info->reg_ndcr = ndcr;
+ host->reg_ndcr = ndcr;
- pxa3xx_nand_set_timing(info, f->timing);
+ pxa3xx_nand_set_timing(host, f->timing);
return 0;
}
static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info)
{
+ /*
+ * We set 0 by hard coding here, for we don't support keep_config
+ * when there is more than one chip attached to the controller
+ */
+ struct pxa3xx_nand_host *host = info->host[0];
uint32_t ndcr = nand_readl(info, NDCR);
- info->page_size = ndcr & NDCR_PAGE_SZ ? 2048 : 512;
- /* set info fields needed to read id */
- info->read_id_bytes = (info->page_size == 2048) ? 4 : 2;
- info->reg_ndcr = ndcr;
- info->cmdset = &default_cmdset;
- info->ndtr0cs0 = nand_readl(info, NDTR0CS0);
- info->ndtr1cs0 = nand_readl(info, NDTR1CS0);
+ if (ndcr & NDCR_PAGE_SZ) {
+ host->page_size = 2048;
+ host->read_id_bytes = 4;
+ } else {
+ host->page_size = 512;
+ host->read_id_bytes = 2;
+ }
+
+ host->reg_ndcr = ndcr & ~NDCR_INT_MASK;
+ host->cmdset = &default_cmdset;
+
+ host->ndtr0cs0 = nand_readl(info, NDTR0CS0);
+ host->ndtr1cs0 = nand_readl(info, NDTR1CS0);
return 0;
}
return -ENOMEM;
}
- info->data_buff_size = MAX_BUFF_SIZE;
info->data_desc = (void *)info->data_buff + data_desc_offset;
info->data_desc_addr = info->data_buff_phys + data_desc_offset;
pxa3xx_nand_data_dma_irq, info);
if (info->data_dma_ch < 0) {
dev_err(&pdev->dev, "failed to request data dma\n");
- dma_free_coherent(&pdev->dev, info->data_buff_size,
+ dma_free_coherent(&pdev->dev, MAX_BUFF_SIZE,
info->data_buff, info->data_buff_phys);
return info->data_dma_ch;
}
static int pxa3xx_nand_sensing(struct pxa3xx_nand_info *info)
{
- struct mtd_info *mtd = info->mtd;
- struct nand_chip *chip = mtd->priv;
-
+ struct mtd_info *mtd;
+ int ret;
+ mtd = info->host[info->cs]->mtd;
/* use the common timing to make a try */
- pxa3xx_nand_config_flash(info, &builtin_flash_types[0]);
- chip->cmdfunc(mtd, NAND_CMD_RESET, 0, 0);
+ ret = pxa3xx_nand_config_flash(info, &builtin_flash_types[0]);
+ if (ret)
+ return ret;
+
+ pxa3xx_nand_cmdfunc(mtd, NAND_CMD_RESET, 0, 0);
if (info->is_ready)
- return 1;
- else
return 0;
+
+ return -ENODEV;
}
static int pxa3xx_nand_scan(struct mtd_info *mtd)
{
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
struct platform_device *pdev = info->pdev;
struct pxa3xx_nand_platform_data *pdata = pdev->dev.platform_data;
- struct nand_flash_dev pxa3xx_flash_ids[2] = { {NULL,}, {NULL,} };
+ struct nand_flash_dev pxa3xx_flash_ids[2], *def = NULL;
const struct pxa3xx_nand_flash *f = NULL;
struct nand_chip *chip = mtd->priv;
uint32_t id = -1;
goto KEEP_CONFIG;
ret = pxa3xx_nand_sensing(info);
- if (!ret) {
- kfree(mtd);
- info->mtd = NULL;
- printk(KERN_INFO "There is no nand chip on cs 0!\n");
+ if (ret) {
+ dev_info(&info->pdev->dev, "There is no chip on cs %d!\n",
+ info->cs);
- return -EINVAL;
+ return ret;
}
chip->cmdfunc(mtd, NAND_CMD_READID, 0, 0);
id = *((uint16_t *)(info->data_buff));
if (id != 0)
- printk(KERN_INFO "Detect a flash id %x\n", id);
+ dev_info(&info->pdev->dev, "Detect a flash id %x\n", id);
else {
- kfree(mtd);
- info->mtd = NULL;
- printk(KERN_WARNING "Read out ID 0, potential timing set wrong!!\n");
+ dev_warn(&info->pdev->dev,
+ "Read out ID 0, potential timing set wrong!!\n");
return -EINVAL;
}
}
if (i >= (ARRAY_SIZE(builtin_flash_types) + pdata->num_flash - 1)) {
- kfree(mtd);
- info->mtd = NULL;
- printk(KERN_ERR "ERROR!! flash not defined!!!\n");
+ dev_err(&info->pdev->dev, "ERROR!! flash not defined!!!\n");
return -EINVAL;
}
- pxa3xx_nand_config_flash(info, f);
+ ret = pxa3xx_nand_config_flash(info, f);
+ if (ret) {
+ dev_err(&info->pdev->dev, "ERROR! Configure failed\n");
+ return ret;
+ }
+
pxa3xx_flash_ids[0].name = f->name;
pxa3xx_flash_ids[0].id = (f->chip_id >> 8) & 0xffff;
pxa3xx_flash_ids[0].pagesize = f->page_size;
pxa3xx_flash_ids[0].erasesize = f->page_size * f->page_per_block;
if (f->flash_width == 16)
pxa3xx_flash_ids[0].options = NAND_BUSWIDTH_16;
+ pxa3xx_flash_ids[1].name = NULL;
+ def = pxa3xx_flash_ids;
KEEP_CONFIG:
- if (nand_scan_ident(mtd, 1, pxa3xx_flash_ids))
+ chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.size = host->page_size;
+
+ chip->options = NAND_NO_AUTOINCR;
+ chip->options |= NAND_NO_READRDY;
+ if (host->reg_ndcr & NDCR_DWIDTH_M)
+ chip->options |= NAND_BUSWIDTH_16;
+
+ if (nand_scan_ident(mtd, 1, def))
return -ENODEV;
/* calculate addressing information */
- info->col_addr_cycles = (mtd->writesize >= 2048) ? 2 : 1;
+ if (mtd->writesize >= 2048)
+ host->col_addr_cycles = 2;
+ else
+ host->col_addr_cycles = 1;
+
info->oob_buff = info->data_buff + mtd->writesize;
if ((mtd->size >> chip->page_shift) > 65536)
- info->row_addr_cycles = 3;
+ host->row_addr_cycles = 3;
else
- info->row_addr_cycles = 2;
- mtd->name = mtd_names[0];
- chip->ecc.mode = NAND_ECC_HW;
- chip->ecc.size = f->page_size;
-
- chip->options = (f->flash_width == 16) ? NAND_BUSWIDTH_16 : 0;
- chip->options |= NAND_NO_AUTOINCR;
- chip->options |= NAND_NO_READRDY;
+ host->row_addr_cycles = 2;
+ mtd->name = mtd_names[0];
return nand_scan_tail(mtd);
}
-static
-struct pxa3xx_nand_info *alloc_nand_resource(struct platform_device *pdev)
+static int alloc_nand_resource(struct platform_device *pdev)
{
+ struct pxa3xx_nand_platform_data *pdata;
struct pxa3xx_nand_info *info;
+ struct pxa3xx_nand_host *host;
struct nand_chip *chip;
struct mtd_info *mtd;
struct resource *r;
- int ret, irq;
+ int ret, irq, cs;
- mtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct pxa3xx_nand_info),
- GFP_KERNEL);
- if (!mtd) {
+ pdata = pdev->dev.platform_data;
+ info = kzalloc(sizeof(*info) + (sizeof(*mtd) +
+ sizeof(*host)) * pdata->num_cs, GFP_KERNEL);
+ if (!info) {
dev_err(&pdev->dev, "failed to allocate memory\n");
- return NULL;
+ return -ENOMEM;
}
- info = (struct pxa3xx_nand_info *)(&mtd[1]);
- chip = (struct nand_chip *)(&mtd[1]);
info->pdev = pdev;
- info->mtd = mtd;
- mtd->priv = info;
- mtd->owner = THIS_MODULE;
-
- chip->ecc.read_page = pxa3xx_nand_read_page_hwecc;
- chip->ecc.write_page = pxa3xx_nand_write_page_hwecc;
- chip->controller = &info->controller;
- chip->waitfunc = pxa3xx_nand_waitfunc;
- chip->select_chip = pxa3xx_nand_select_chip;
- chip->dev_ready = pxa3xx_nand_dev_ready;
- chip->cmdfunc = pxa3xx_nand_cmdfunc;
- chip->read_word = pxa3xx_nand_read_word;
- chip->read_byte = pxa3xx_nand_read_byte;
- chip->read_buf = pxa3xx_nand_read_buf;
- chip->write_buf = pxa3xx_nand_write_buf;
- chip->verify_buf = pxa3xx_nand_verify_buf;
+ for (cs = 0; cs < pdata->num_cs; cs++) {
+ mtd = (struct mtd_info *)((unsigned int)&info[1] +
+ (sizeof(*mtd) + sizeof(*host)) * cs);
+ chip = (struct nand_chip *)(&mtd[1]);
+ host = (struct pxa3xx_nand_host *)chip;
+ info->host[cs] = host;
+ host->mtd = mtd;
+ host->cs = cs;
+ host->info_data = info;
+ mtd->priv = host;
+ mtd->owner = THIS_MODULE;
+
+ chip->ecc.read_page = pxa3xx_nand_read_page_hwecc;
+ chip->ecc.write_page = pxa3xx_nand_write_page_hwecc;
+ chip->controller = &info->controller;
+ chip->waitfunc = pxa3xx_nand_waitfunc;
+ chip->select_chip = pxa3xx_nand_select_chip;
+ chip->cmdfunc = pxa3xx_nand_cmdfunc;
+ chip->read_word = pxa3xx_nand_read_word;
+ chip->read_byte = pxa3xx_nand_read_byte;
+ chip->read_buf = pxa3xx_nand_read_buf;
+ chip->write_buf = pxa3xx_nand_write_buf;
+ chip->verify_buf = pxa3xx_nand_verify_buf;
+ }
spin_lock_init(&chip->controller->lock);
init_waitqueue_head(&chip->controller->wq);
platform_set_drvdata(pdev, info);
- return info;
+ return 0;
fail_free_buf:
free_irq(irq, info);
if (use_dma) {
pxa_free_dma(info->data_dma_ch);
- dma_free_coherent(&pdev->dev, info->data_buff_size,
+ dma_free_coherent(&pdev->dev, MAX_BUFF_SIZE,
info->data_buff, info->data_buff_phys);
} else
kfree(info->data_buff);
clk_disable(info->clk);
clk_put(info->clk);
fail_free_mtd:
- kfree(mtd);
- return NULL;
+ kfree(info);
+ return ret;
}
static int pxa3xx_nand_remove(struct platform_device *pdev)
{
struct pxa3xx_nand_info *info = platform_get_drvdata(pdev);
- struct mtd_info *mtd = info->mtd;
+ struct pxa3xx_nand_platform_data *pdata;
struct resource *r;
- int irq;
+ int irq, cs;
+ if (!info)
+ return 0;
+
+ pdata = pdev->dev.platform_data;
platform_set_drvdata(pdev, NULL);
irq = platform_get_irq(pdev, 0);
free_irq(irq, info);
if (use_dma) {
pxa_free_dma(info->data_dma_ch);
- dma_free_writecombine(&pdev->dev, info->data_buff_size,
+ dma_free_writecombine(&pdev->dev, MAX_BUFF_SIZE,
info->data_buff, info->data_buff_phys);
} else
kfree(info->data_buff);
clk_disable(info->clk);
clk_put(info->clk);
- if (mtd) {
- mtd_device_unregister(mtd);
- kfree(mtd);
- }
+ for (cs = 0; cs < pdata->num_cs; cs++)
+ nand_release(info->host[cs]->mtd);
+ kfree(info);
return 0;
}
{
struct pxa3xx_nand_platform_data *pdata;
struct pxa3xx_nand_info *info;
+ int ret, cs, probe_success;
pdata = pdev->dev.platform_data;
if (!pdata) {
return -ENODEV;
}
- info = alloc_nand_resource(pdev);
- if (info == NULL)
- return -ENOMEM;
-
- if (pxa3xx_nand_scan(info->mtd)) {
- dev_err(&pdev->dev, "failed to scan nand\n");
- pxa3xx_nand_remove(pdev);
- return -ENODEV;
+ ret = alloc_nand_resource(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "alloc nand resource failed\n");
+ return ret;
}
- if (mtd_has_cmdlinepart()) {
- const char *probes[] = { "cmdlinepart", NULL };
- struct mtd_partition *parts;
- int nr_parts;
+ info = platform_get_drvdata(pdev);
+ probe_success = 0;
+ for (cs = 0; cs < pdata->num_cs; cs++) {
+ info->cs = cs;
+ ret = pxa3xx_nand_scan(info->host[cs]->mtd);
+ if (ret) {
+ dev_warn(&pdev->dev, "failed to scan nand at cs %d\n",
+ cs);
+ continue;
+ }
- nr_parts = parse_mtd_partitions(info->mtd, probes, &parts, 0);
+ ret = mtd_device_parse_register(info->host[cs]->mtd, NULL, 0,
+ pdata->parts[cs], pdata->nr_parts[cs]);
+ if (!ret)
+ probe_success = 1;
+ }
- if (nr_parts)
- return mtd_device_register(info->mtd, parts, nr_parts);
+ if (!probe_success) {
+ pxa3xx_nand_remove(pdev);
+ return -ENODEV;
}
- return mtd_device_register(info->mtd, pdata->parts, pdata->nr_parts);
+ return 0;
}
#ifdef CONFIG_PM
static int pxa3xx_nand_suspend(struct platform_device *pdev, pm_message_t state)
{
struct pxa3xx_nand_info *info = platform_get_drvdata(pdev);
- struct mtd_info *mtd = info->mtd;
+ struct pxa3xx_nand_platform_data *pdata;
+ struct mtd_info *mtd;
+ int cs;
+ pdata = pdev->dev.platform_data;
if (info->state) {
dev_err(&pdev->dev, "driver busy, state = %d\n", info->state);
return -EAGAIN;
}
+ for (cs = 0; cs < pdata->num_cs; cs++) {
+ mtd = info->host[cs]->mtd;
+ mtd->suspend(mtd);
+ }
+
return 0;
}
static int pxa3xx_nand_resume(struct platform_device *pdev)
{
struct pxa3xx_nand_info *info = platform_get_drvdata(pdev);
- struct mtd_info *mtd = info->mtd;
+ struct pxa3xx_nand_platform_data *pdata;
+ struct mtd_info *mtd;
+ int cs;
- nand_writel(info, NDTR0CS0, info->ndtr0cs0);
- nand_writel(info, NDTR1CS0, info->ndtr1cs0);
- clk_enable(info->clk);
+ pdata = pdev->dev.platform_data;
+ /* We don't want to handle interrupt without calling mtd routine */
+ disable_int(info, NDCR_INT_MASK);
+
+ /*
+ * Directly set the chip select to a invalid value,
+ * then the driver would reset the timing according
+ * to current chip select at the beginning of cmdfunc
+ */
+ info->cs = 0xff;
+
+ /*
+ * As the spec says, the NDSR would be updated to 0x1800 when
+ * doing the nand_clk disable/enable.
+ * To prevent it damaging state machine of the driver, clear
+ * all status before resume
+ */
+ nand_writel(info, NDSR, NDSR_MASK);
+ for (cs = 0; cs < pdata->num_cs; cs++) {
+ mtd = info->host[cs]->mtd;
+ mtd->resume(mtd);
+ }
return 0;
}
}
#ifdef CONFIG_PM
-int r852_suspend(struct device *device)
+static int r852_suspend(struct device *device)
{
struct r852_device *dev = pci_get_drvdata(to_pci_dev(device));
return 0;
}
-int r852_resume(struct device *device)
+static int r852_resume(struct device *device)
{
struct r852_device *dev = pci_get_drvdata(to_pci_dev(device));
MODULE_DEVICE_TABLE(pci, r852_pci_id_tbl);
-SIMPLE_DEV_PM_OPS(r852_pm_ops, r852_suspend, r852_resume);
+static SIMPLE_DEV_PM_OPS(r852_pm_ops, r852_suspend, r852_resume);
static struct pci_driver r852_pci_driver = {
.name = DRV_NAME,
return 0;
}
- /* Read the syndrom pattern from the FPGA and correct the bitorder */
+ /* Read the syndrome pattern from the FPGA and correct the bitorder */
rs_ecc = (volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECC);
for (i = 0; i < 8; i++) {
ecc[i] = bitrev8(*rs_ecc);
/* Let the library code do its magic. */
res = decode_rs8(rs_decoder, (uint8_t *) buf, par, 512, syn, 0, NULL, 0xff, NULL);
if (res > 0) {
- DEBUG(MTD_DEBUG_LEVEL0, "rtc_from4_correct_data: " "ECC corrected %d errors on read\n", res);
+ pr_debug("rtc_from4_correct_data: " "ECC corrected %d errors on read\n", res);
}
return res;
}
len = mtd->writesize;
buf = kmalloc(len, GFP_KERNEL);
if (!buf) {
- printk(KERN_ERR "rtc_from4_errstat: Out of memory!\n");
er_stat = 1;
goto out;
}
/* free the common resources */
- if (info->clk != NULL && !IS_ERR(info->clk)) {
+ if (!IS_ERR(info->clk)) {
s3c2410_nand_clk_set_state(info, CLOCK_DISABLE);
clk_put(info->clk);
}
return 0;
}
-const char *part_probes[] = { "cmdlinepart", NULL };
static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info,
struct s3c2410_nand_mtd *mtd,
struct s3c2410_nand_set *set)
{
- struct mtd_partition *part_info;
- int nr_part = 0;
+ if (set)
+ mtd->mtd.name = set->name;
- if (set == NULL)
- return mtd_device_register(&mtd->mtd, NULL, 0);
-
- mtd->mtd.name = set->name;
- nr_part = parse_mtd_partitions(&mtd->mtd, part_probes, &part_info, 0);
-
- if (nr_part <= 0 && set->nr_partitions > 0) {
- nr_part = set->nr_partitions;
- part_info = set->partitions;
- }
-
- return mtd_device_register(&mtd->mtd, part_info, nr_part);
+ return mtd_device_parse_register(&mtd->mtd, NULL, 0,
+ set->partitions, set->nr_partitions);
}
/**
/* If you use u-boot BBT creation code, specifying this flag will
* let the kernel fish out the BBT from the NAND, and also skip the
* full NAND scan that can take 1/2s or so. Little things... */
- if (set->flash_bbt)
- chip->options |= NAND_USE_FLASH_BBT | NAND_SKIP_BBTSCAN;
+ if (set->flash_bbt) {
+ chip->bbt_options |= NAND_BBT_USE_FLASH;
+ chip->options |= NAND_SKIP_BBTSCAN;
+ }
}
/**
return readb(sharpsl->io + ECCCNTR) != 0;
}
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
/*
* Main initialization routine
*/
static int __devinit sharpsl_nand_probe(struct platform_device *pdev)
{
struct nand_chip *this;
- struct mtd_partition *sharpsl_partition_info;
- int nr_partitions;
struct resource *r;
int err = 0;
struct sharpsl_nand *sharpsl;
/* Register the partitions */
sharpsl->mtd.name = "sharpsl-nand";
- nr_partitions = parse_mtd_partitions(&sharpsl->mtd, part_probes, &sharpsl_partition_info, 0);
- if (nr_partitions <= 0) {
- nr_partitions = data->nr_partitions;
- sharpsl_partition_info = data->partitions;
- }
- err = mtd_device_register(&sharpsl->mtd, sharpsl_partition_info,
- nr_partitions);
+ err = mtd_device_parse_register(&sharpsl->mtd, NULL, 0,
+ data->partitions, data->nr_partitions);
if (err)
goto err_add;
*/
#include <linux/kernel.h>
#include <linux/mtd/nand.h>
+#include <linux/module.h>
#include "sm_common.h"
static struct nand_ecclayout nand_oob_sm = {
/* As long as this function is called on erase block boundaries
it will work correctly for 256 byte nand */
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooboffs = 0;
ops.ooblen = mtd->oobsize;
ops.oobbuf = (void *)&oob;
return 1;
}
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
/*
* Probe for the NAND device.
*/
struct mtd_info *mtd;
struct nand_chip *nand_chip;
int res;
- struct mtd_partition *partitions = NULL;
- int num_partitions = 0;
+ struct mtd_part_parser_data ppdata;
/* Allocate memory for the device structure (and zero it) */
host = kzalloc(sizeof(struct socrates_nand_host), GFP_KERNEL);
mtd->name = "socrates_nand";
mtd->owner = THIS_MODULE;
mtd->dev.parent = &ofdev->dev;
+ ppdata.of_node = ofdev->dev.of_node;
/*should never be accessed directly */
nand_chip->IO_ADDR_R = (void *)0xdeadbeef;
goto out;
}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
- num_partitions = parse_mtd_partitions(mtd, part_probes,
- &partitions, 0);
- if (num_partitions < 0) {
- res = num_partitions;
- goto release;
- }
-#endif
-
- if (num_partitions == 0) {
- num_partitions = of_mtd_parse_partitions(&ofdev->dev,
- ofdev->dev.of_node,
- &partitions);
- if (num_partitions < 0) {
- res = num_partitions;
- goto release;
- }
- }
-
- res = mtd_device_register(mtd, partitions, num_partitions);
+ res = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
if (!res)
return res;
-release:
nand_release(mtd);
out:
#define mtd_to_tmio(m) container_of(m, struct tmio_nand, mtd)
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-static const char *part_probes[] = { "cmdlinepart", NULL };
-#endif
/*--------------------------------------------------------------------------*/
struct tmio_nand *tmio;
struct mtd_info *mtd;
struct nand_chip *nand_chip;
- struct mtd_partition *parts;
- int nbparts = 0;
int retval;
if (data == NULL)
goto err_scan;
}
/* Register the partitions */
-#ifdef CONFIG_MTD_CMDLINE_PARTS
- nbparts = parse_mtd_partitions(mtd, part_probes, &parts, 0);
-#endif
- if (nbparts <= 0 && data) {
- parts = data->partition;
- nbparts = data->num_partitions;
- }
-
- retval = mtd_device_register(mtd, parts, nbparts);
+ retval = mtd_device_parse_register(mtd, NULL, 0,
+ data ? data->partition : NULL,
+ data ? data->num_partitions : 0);
if (!retval)
return retval;
unsigned char hold; /* in gbusclock */
unsigned char spw; /* in gbusclock */
struct nand_hw_control hw_control;
- struct mtd_partition *parts[MAX_TXX9NDFMC_DEV];
};
static struct platform_device *mtd_to_platdev(struct mtd_info *mtd)
static int __init txx9ndfmc_probe(struct platform_device *dev)
{
struct txx9ndfmc_platform_data *plat = dev->dev.platform_data;
- static const char *probes[] = { "cmdlinepart", NULL };
int hold, spw;
int i;
struct txx9ndfmc_drvdata *drvdata;
struct txx9ndfmc_priv *txx9_priv;
struct nand_chip *chip;
struct mtd_info *mtd;
- int nr_parts;
if (!(plat->ch_mask & (1 << i)))
continue;
}
mtd->name = txx9_priv->mtdname;
- nr_parts = parse_mtd_partitions(mtd, probes,
- &drvdata->parts[i], 0);
- mtd_device_register(mtd, drvdata->parts[i], nr_parts);
+ mtd_device_parse_register(mtd, NULL, 0, NULL, 0);
drvdata->mtds[i] = mtd;
}
txx9_priv = chip->priv;
nand_release(mtd);
- kfree(drvdata->parts[i]);
kfree(txx9_priv->mtdname);
kfree(txx9_priv);
}
return;
}
- DEBUG(MTD_DEBUG_LEVEL1, "NFTL: add_mtd for %s\n", mtd->name);
+ pr_debug("NFTL: add_mtd for %s\n", mtd->name);
nftl = kzalloc(sizeof(struct NFTLrecord), GFP_KERNEL);
- if (!nftl) {
- printk(KERN_WARNING "NFTL: out of memory for data structures\n");
+ if (!nftl)
return;
- }
nftl->mbd.mtd = mtd;
nftl->mbd.devnum = -1;
{
struct NFTLrecord *nftl = (void *)dev;
- DEBUG(MTD_DEBUG_LEVEL1, "NFTL: remove_dev (i=%d)\n", dev->devnum);
+ pr_debug("NFTL: remove_dev (i=%d)\n", dev->devnum);
del_mtd_blktrans_dev(dev);
kfree(nftl->ReplUnitTable);
struct mtd_oob_ops ops;
int res;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooboffs = offs & mask;
ops.ooblen = len;
ops.oobbuf = buf;
struct mtd_oob_ops ops;
int res;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooboffs = offs & mask;
ops.ooblen = len;
ops.oobbuf = buf;
struct mtd_oob_ops ops;
int res;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooboffs = offs & mask;
ops.ooblen = mtd->oobsize;
ops.oobbuf = oob;
/* Normally, we force a fold to happen before we run out of free blocks completely */
if (!desperate && nftl->numfreeEUNs < 2) {
- DEBUG(MTD_DEBUG_LEVEL1, "NFTL_findfreeblock: there are too few free EUNs\n");
+ pr_debug("NFTL_findfreeblock: there are too few free EUNs\n");
return BLOCK_NIL;
}
if (block == 2) {
foldmark = oob.u.c.FoldMark | oob.u.c.FoldMark1;
if (foldmark == FOLD_MARK_IN_PROGRESS) {
- DEBUG(MTD_DEBUG_LEVEL1,
- "Write Inhibited on EUN %d\n", thisEUN);
+ pr_debug("Write Inhibited on EUN %d\n", thisEUN);
inplace = 0;
} else {
/* There's no other reason not to do inplace,
if (BlockLastState[block] != SECTOR_FREE &&
BlockMap[block] != BLOCK_NIL &&
BlockMap[block] != targetEUN) {
- DEBUG(MTD_DEBUG_LEVEL1, "Setting inplace to 0. VUC %d, "
+ pr_debug("Setting inplace to 0. VUC %d, "
"block %d was %x lastEUN, "
"and is in EUN %d (%s) %d\n",
thisVUC, block, BlockLastState[block],
pendingblock < ((thisVUC + 1)* (nftl->EraseSize / 512)) &&
BlockLastState[pendingblock - (thisVUC * (nftl->EraseSize / 512))] !=
SECTOR_FREE) {
- DEBUG(MTD_DEBUG_LEVEL1, "Pending write not free in EUN %d. "
+ pr_debug("Pending write not free in EUN %d. "
"Folding out of place.\n", targetEUN);
inplace = 0;
}
}
if (!inplace) {
- DEBUG(MTD_DEBUG_LEVEL1, "Cannot fold Virtual Unit Chain %d in place. "
+ pr_debug("Cannot fold Virtual Unit Chain %d in place. "
"Trying out-of-place\n", thisVUC);
/* We need to find a targetEUN to fold into. */
targetEUN = NFTL_findfreeblock(nftl, 1);
and the Erase Unit into which we are supposed to be copying.
Go for it.
*/
- DEBUG(MTD_DEBUG_LEVEL1,"Folding chain %d into unit %d\n", thisVUC, targetEUN);
+ pr_debug("Folding chain %d into unit %d\n", thisVUC, targetEUN);
for (block = 0; block < nftl->EraseSize / 512 ; block++) {
unsigned char movebuf[512];
int ret;
ret = mtd->read(mtd, (nftl->EraseSize * BlockMap[block]) + (block * 512),
512, &retlen, movebuf);
- if (ret < 0 && ret != -EUCLEAN) {
+ if (ret < 0 && !mtd_is_bitflip(ret)) {
ret = mtd->read(mtd, (nftl->EraseSize * BlockMap[block])
+ (block * 512), 512, &retlen,
movebuf);
has duplicate chains, we need to free one of the chains because it's not necessary any more.
*/
thisEUN = nftl->EUNtable[thisVUC];
- DEBUG(MTD_DEBUG_LEVEL1,"Want to erase\n");
+ pr_debug("Want to erase\n");
/* For each block in the old chain (except the targetEUN of course),
free it and make it available for future use */
(writeEUN * nftl->EraseSize) + blockofs,
8, &retlen, (char *)&bci);
- DEBUG(MTD_DEBUG_LEVEL2, "Status of block %d in EUN %d is %x\n",
+ pr_debug("Status of block %d in EUN %d is %x\n",
block , writeEUN, le16_to_cpu(bci.Status));
status = bci.Status | bci.Status1;
but they are reserved for when we're
desperate. Well, now we're desperate.
*/
- DEBUG(MTD_DEBUG_LEVEL1, "Using desperate==1 to find free EUN to accommodate write to VUC %d\n", thisVUC);
+ pr_debug("Using desperate==1 to find free EUN to accommodate write to VUC %d\n", thisVUC);
writeEUN = NFTL_findfreeblock(nftl, 1);
}
if (writeEUN == BLOCK_NIL) {
size_t retlen;
int res = mtd->read(mtd, ptr, 512, &retlen, buffer);
- if (res < 0 && res != -EUCLEAN)
+ if (res < 0 && !mtd_is_bitflip(res))
return -EIO;
}
return 0;
/* find_boot_record: Find the NFTL Media Header and its Spare copy which contains the
* various device information of the NFTL partition and Bad Unit Table. Update
- * the ReplUnitTable[] table accroding to the Bad Unit Table. ReplUnitTable[]
+ * the ReplUnitTable[] table according to the Bad Unit Table. ReplUnitTable[]
* is used for management of Erase Unit in other routines in nftl.c and nftlmount.c
*/
static int find_boot_record(struct NFTLrecord *nftl)
*
* Return: 0 when succeed, -1 on error.
*
- * ToDo: 1. Is it neceressary to check_free_sector after erasing ??
+ * ToDo: 1. Is it necessary to check_free_sector after erasing ??
*/
int NFTL_formatblock(struct NFTLrecord *nftl, int block)
{
nb_erases = le32_to_cpu(uci.WearInfo);
nb_erases++;
- /* wrap (almost impossible with current flashs) or free block */
+ /* wrap (almost impossible with current flash) or free block */
if (nb_erases == 0)
nb_erases = 1;
* Mark as 'IGNORE' each incorrect sector. This check is only done if the chain
* was being folded when NFTL was interrupted.
*
- * The check_free_sectors in this function is neceressary. There is a possible
+ * The check_free_sectors in this function is necessary. There is a possible
* situation that after writing the Data area, the Block Control Information is
* not updated according (due to power failure or something) which leaves the block
- * in an umconsistent state. So we have to check if a block is really FREE in this
+ * in an inconsistent state. So we have to check if a block is really FREE in this
* case. */
static void check_sectors_in_chain(struct NFTLrecord *nftl, unsigned int first_block)
{
for (;;) {
length++;
- /* avoid infinite loops, although this is guaranted not to
+ /* avoid infinite loops, although this is guaranteed not to
happen because of the previous checks */
if (length >= nftl->nb_blocks) {
printk("nftl: length too long %d !\n", length);
/* format_chain: Format an invalid Virtual Unit chain. It frees all the Erase Units in a
* Virtual Unit Chain, i.e. all the units are disconnected.
*
- * It is not stricly correct to begin from the first block of the chain because
+ * It is not strictly correct to begin from the first block of the chain because
* if we stop the code, we may see again a valid chain if there was a first_block
* flag in a block inside it. But is it really a problem ?
*
- * FixMe: Figure out what the last statesment means. What if power failure when we are
+ * FixMe: Figure out what the last statement means. What if power failure when we are
* in the for (;;) loop formatting blocks ??
*/
static void format_chain(struct NFTLrecord *nftl, unsigned int first_block)
* totally free (only 0xff).
*
* Definition: Free Erase Unit -- A properly erased/formatted Free Erase Unit should have meet the
- * following critia:
+ * following criteria:
* 1. */
static int check_and_mark_free_block(struct NFTLrecord *nftl, int block)
{
erase_mark = le16_to_cpu ((h1.EraseMark | h1.EraseMark1));
if (erase_mark != ERASE_MARK) {
/* if no erase mark, the block must be totally free. This is
- possible in two cases : empty filsystem or interrupted erase (very unlikely) */
+ possible in two cases : empty filesystem or interrupted erase (very unlikely) */
if (check_free_sectors (nftl, block * nftl->EraseSize, nftl->EraseSize, 1) != 0)
return -1;
/* get_fold_mark: Read fold mark from Unit Control Information #2, we use FOLD_MARK_IN_PROGRESS
* to indicate that we are in the progression of a Virtual Unit Chain folding. If the UCI #2
* is FOLD_MARK_IN_PROGRESS when mounting the NFTL, the (previous) folding process is interrupted
- * for some reason. A clean up/check of the VUC is neceressary in this case.
+ * for some reason. A clean up/check of the VUC is necessary in this case.
*
* WARNING: return 0 if read error
*/
printk("Block %d: incorrect logical block: %d expected: %d\n",
block, logical_block, first_logical_block);
/* the chain is incorrect : we must format it,
- but we need to read it completly */
+ but we need to read it completely */
do_format_chain = 1;
}
if (is_first_block) {
printk("Block %d: incorrectly marked as first block in chain\n",
block);
/* the chain is incorrect : we must format it,
- but we need to read it completly */
+ but we need to read it completely */
do_format_chain = 1;
} else {
printk("Block %d: folding in progress - ignoring first block flag\n",
#include <linux/slab.h>
#include <linux/mtd/partitions.h>
-int __devinit of_mtd_parse_partitions(struct device *dev,
- struct device_node *node,
- struct mtd_partition **pparts)
+static int parse_ofpart_partitions(struct mtd_info *master,
+ struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
{
+ struct device_node *node;
const char *partname;
struct device_node *pp;
int nr_parts, i;
+
+ if (!data)
+ return 0;
+
+ node = data->of_node;
+ if (!node)
+ return 0;
+
/* First count the subnodes */
pp = NULL;
nr_parts = 0;
if (!i) {
of_node_put(pp);
- dev_err(dev, "No valid partition found on %s\n", node->full_name);
+ pr_err("No valid partition found on %s\n", node->full_name);
kfree(*pparts);
*pparts = NULL;
return -EINVAL;
return nr_parts;
}
-EXPORT_SYMBOL(of_mtd_parse_partitions);
+
+static struct mtd_part_parser ofpart_parser = {
+ .owner = THIS_MODULE,
+ .parse_fn = parse_ofpart_partitions,
+ .name = "ofpart",
+};
+
+static int parse_ofoldpart_partitions(struct mtd_info *master,
+ struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
+{
+ struct device_node *dp;
+ int i, plen, nr_parts;
+ const struct {
+ __be32 offset, len;
+ } *part;
+ const char *names;
+
+ if (!data)
+ return 0;
+
+ dp = data->of_node;
+ if (!dp)
+ return 0;
+
+ part = of_get_property(dp, "partitions", &plen);
+ if (!part)
+ return 0; /* No partitions found */
+
+ pr_warning("Device tree uses obsolete partition map binding: %s\n",
+ dp->full_name);
+
+ nr_parts = plen / sizeof(part[0]);
+
+ *pparts = kzalloc(nr_parts * sizeof(*(*pparts)), GFP_KERNEL);
+ if (!pparts)
+ return -ENOMEM;
+
+ names = of_get_property(dp, "partition-names", &plen);
+
+ for (i = 0; i < nr_parts; i++) {
+ (*pparts)[i].offset = be32_to_cpu(part->offset);
+ (*pparts)[i].size = be32_to_cpu(part->len) & ~1;
+ /* bit 0 set signifies read only partition */
+ if (be32_to_cpu(part->len) & 1)
+ (*pparts)[i].mask_flags = MTD_WRITEABLE;
+
+ if (names && (plen > 0)) {
+ int len = strlen(names) + 1;
+
+ (*pparts)[i].name = (char *)names;
+ plen -= len;
+ names += len;
+ } else {
+ (*pparts)[i].name = "unnamed";
+ }
+
+ part++;
+ }
+
+ return nr_parts;
+}
+
+static struct mtd_part_parser ofoldpart_parser = {
+ .owner = THIS_MODULE,
+ .parse_fn = parse_ofoldpart_partitions,
+ .name = "ofoldpart",
+};
+
+static int __init ofpart_parser_init(void)
+{
+ int rc;
+ rc = register_mtd_parser(&ofpart_parser);
+ if (rc)
+ goto out;
+
+ rc = register_mtd_parser(&ofoldpart_parser);
+ if (!rc)
+ return 0;
+
+ deregister_mtd_parser(&ofoldpart_parser);
+out:
+ return rc;
+}
+
+module_init(ofpart_parser_init);
MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Parser for MTD partitioning information in device tree");
+MODULE_AUTHOR("Vitaly Wool, David Gibson");
+/*
+ * When MTD core cannot find the requested parser, it tries to load the module
+ * with the same name. Since we provide the ofoldpart parser, we should have
+ * the corresponding alias.
+ */
+MODULE_ALIAS("ofoldpart");
*/
#define DRIVER_NAME "onenand-flash"
-static const char *part_probes[] = { "cmdlinepart", NULL, };
-
struct onenand_info {
struct mtd_info mtd;
- struct mtd_partition *parts;
struct onenand_chip onenand;
};
goto out_iounmap;
}
- err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0);
- if (err > 0)
- mtd_device_register(&info->mtd, info->parts, err);
- else if (err <= 0 && pdata && pdata->parts)
- mtd_device_register(&info->mtd, pdata->parts, pdata->nr_parts);
- else
- err = mtd_device_register(&info->mtd, NULL, 0);
+ err = mtd_device_parse_register(&info->mtd, NULL, 0,
+ pdata ? pdata->parts : NULL,
+ pdata ? pdata->nr_parts : 0);
platform_set_drvdata(pdev, info);
platform_set_drvdata(pdev, NULL);
if (info) {
- mtd_device_unregister(&info->mtd);
onenand_release(&info->mtd);
release_mem_region(res->start, size);
iounmap(info->onenand.base);
unsigned long phys_base;
int gpio_irq;
struct mtd_info mtd;
- struct mtd_partition *parts;
struct onenand_chip onenand;
struct completion irq_done;
struct completion dma_done;
struct regulator *regulator;
};
-static const char *part_probes[] = { "cmdlinepart", NULL, };
-
static void omap2_onenand_dma_cb(int lch, u16 ch_status, void *data)
{
struct omap2_onenand *c = data;
c->regulator = regulator_get(&pdev->dev, "vonenand");
if (IS_ERR(c->regulator)) {
dev_err(&pdev->dev, "Failed to get regulator\n");
+ r = PTR_ERR(c->regulator);
goto err_release_dma;
}
c->onenand.enable = omap2_onenand_enable;
if ((r = onenand_scan(&c->mtd, 1)) < 0)
goto err_release_regulator;
- r = parse_mtd_partitions(&c->mtd, part_probes, &c->parts, 0);
- if (r > 0)
- r = mtd_device_register(&c->mtd, c->parts, r);
- else if (pdata->parts != NULL)
- r = mtd_device_register(&c->mtd, pdata->parts, pdata->nr_parts);
- else
- r = mtd_device_register(&c->mtd, NULL, 0);
+ r = mtd_device_parse_register(&c->mtd, NULL, 0,
+ pdata ? pdata->parts : NULL,
+ pdata ? pdata->nr_parts : 0);
if (r)
goto err_release_onenand;
err_free_cs:
gpmc_cs_free(c->gpmc_cs);
err_kfree:
- kfree(c->parts);
kfree(c);
return r;
iounmap(c->onenand.base);
release_mem_region(c->phys_base, ONENAND_IO_SIZE);
gpmc_cs_free(c->gpmc_cs);
- kfree(c->parts);
kfree(c);
return 0;
}
/**
- * onenand_transfer_auto_oob - [Internal] oob auto-placement transfer
+ * onenand_transfer_auto_oob - [INTERN] oob auto-placement transfer
* @param mtd MTD device structure
* @param buf destination address
* @param column oob offset to read from
return status;
/* check if we failed due to uncorrectable error */
- if (status != -EBADMSG && status != ONENAND_BBT_READ_ECC_ERROR)
+ if (!mtd_is_eccerr(status) && status != ONENAND_BBT_READ_ECC_ERROR)
return status;
/* check if address lies in MLC region */
int ret = 0;
int writesize = this->writesize;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08x, len = %i\n",
- __func__, (unsigned int) from, (int) len);
+ pr_debug("%s: from = 0x%08x, len = %i\n", __func__, (unsigned int)from,
+ (int)len);
- if (ops->mode == MTD_OOB_AUTO)
+ if (ops->mode == MTD_OPS_AUTO_OOB)
oobsize = this->ecclayout->oobavail;
else
oobsize = mtd->oobsize;
if (unlikely(ret))
ret = onenand_recover_lsb(mtd, from, ret);
onenand_update_bufferram(mtd, from, !ret);
- if (ret == -EBADMSG)
+ if (mtd_is_eccerr(ret))
ret = 0;
if (ret)
break;
thisooblen = oobsize - oobcolumn;
thisooblen = min_t(int, thisooblen, ooblen - oobread);
- if (ops->mode == MTD_OOB_AUTO)
+ if (ops->mode == MTD_OPS_AUTO_OOB)
onenand_transfer_auto_oob(mtd, oobbuf, oobcolumn, thisooblen);
else
this->read_bufferram(mtd, ONENAND_SPARERAM, oobbuf, oobcolumn, thisooblen);
int ret = 0, boundary = 0;
int writesize = this->writesize;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08x, len = %i\n",
- __func__, (unsigned int) from, (int) len);
+ pr_debug("%s: from = 0x%08x, len = %i\n", __func__, (unsigned int)from,
+ (int)len);
- if (ops->mode == MTD_OOB_AUTO)
+ if (ops->mode == MTD_OPS_AUTO_OOB)
oobsize = this->ecclayout->oobavail;
else
oobsize = mtd->oobsize;
this->command(mtd, ONENAND_CMD_READ, from, writesize);
ret = this->wait(mtd, FL_READING);
onenand_update_bufferram(mtd, from, !ret);
- if (ret == -EBADMSG)
+ if (mtd_is_eccerr(ret))
ret = 0;
}
}
thisooblen = oobsize - oobcolumn;
thisooblen = min_t(int, thisooblen, ooblen - oobread);
- if (ops->mode == MTD_OOB_AUTO)
+ if (ops->mode == MTD_OPS_AUTO_OOB)
onenand_transfer_auto_oob(mtd, oobbuf, oobcolumn, thisooblen);
else
this->read_bufferram(mtd, ONENAND_SPARERAM, oobbuf, oobcolumn, thisooblen);
/* Now wait for load */
ret = this->wait(mtd, FL_READING);
onenand_update_bufferram(mtd, from, !ret);
- if (ret == -EBADMSG)
+ if (mtd_is_eccerr(ret))
ret = 0;
}
struct mtd_ecc_stats stats;
int read = 0, thislen, column, oobsize;
size_t len = ops->ooblen;
- mtd_oob_mode_t mode = ops->mode;
+ unsigned int mode = ops->mode;
u_char *buf = ops->oobbuf;
int ret = 0, readcmd;
from += ops->ooboffs;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08x, len = %i\n",
- __func__, (unsigned int) from, (int) len);
+ pr_debug("%s: from = 0x%08x, len = %i\n", __func__, (unsigned int)from,
+ (int)len);
/* Initialize return length value */
ops->oobretlen = 0;
- if (mode == MTD_OOB_AUTO)
+ if (mode == MTD_OPS_AUTO_OOB)
oobsize = this->ecclayout->oobavail;
else
oobsize = mtd->oobsize;
if (unlikely(ret))
ret = onenand_recover_lsb(mtd, from, ret);
- if (ret && ret != -EBADMSG) {
+ if (ret && !mtd_is_eccerr(ret)) {
printk(KERN_ERR "%s: read failed = 0x%x\n",
__func__, ret);
break;
}
- if (mode == MTD_OOB_AUTO)
+ if (mode == MTD_OPS_AUTO_OOB)
onenand_transfer_auto_oob(mtd, buf, column, thislen);
else
this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen);
int ret;
switch (ops->mode) {
- case MTD_OOB_PLACE:
- case MTD_OOB_AUTO:
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_AUTO_OOB:
break;
- case MTD_OOB_RAW:
+ case MTD_OPS_RAW:
/* Not implemented yet */
default:
return -EINVAL;
size_t len = ops->ooblen;
u_char *buf = ops->oobbuf;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08x, len = %zi\n",
- __func__, (unsigned int) from, len);
+ pr_debug("%s: from = 0x%08x, len = %zi\n", __func__, (unsigned int)from,
+ len);
/* Initialize return value */
ops->oobretlen = 0;
/* Wait for any existing operation to clear */
onenand_panic_wait(mtd);
- DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n",
- __func__, (unsigned int) to, (int) len);
+ pr_debug("%s: to = 0x%08x, len = %i\n", __func__, (unsigned int)to,
+ (int)len);
/* Initialize retlen, in case of early exit */
*retlen = 0;
}
/**
- * onenand_fill_auto_oob - [Internal] oob auto-placement transfer
+ * onenand_fill_auto_oob - [INTERN] oob auto-placement transfer
* @param mtd MTD device structure
* @param oob_buf oob buffer
* @param buf source address
u_char *oobbuf;
int ret = 0, cmd;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n",
- __func__, (unsigned int) to, (int) len);
+ pr_debug("%s: to = 0x%08x, len = %i\n", __func__, (unsigned int)to,
+ (int)len);
/* Initialize retlen, in case of early exit */
ops->retlen = 0;
if (!len)
return 0;
- if (ops->mode == MTD_OOB_AUTO)
+ if (ops->mode == MTD_OPS_AUTO_OOB)
oobsize = this->ecclayout->oobavail;
else
oobsize = mtd->oobsize;
/* We send data to spare ram with oobsize
* to prevent byte access */
memset(oobbuf, 0xff, mtd->oobsize);
- if (ops->mode == MTD_OOB_AUTO)
+ if (ops->mode == MTD_OPS_AUTO_OOB)
onenand_fill_auto_oob(mtd, oobbuf, oob, oobcolumn, thisooblen);
else
memcpy(oobbuf + oobcolumn, oob, thisooblen);
/**
- * onenand_write_oob_nolock - [Internal] OneNAND write out-of-band
+ * onenand_write_oob_nolock - [INTERN] OneNAND write out-of-band
* @param mtd MTD device structure
* @param to offset to write to
* @param len number of bytes to write
u_char *oobbuf;
size_t len = ops->ooblen;
const u_char *buf = ops->oobbuf;
- mtd_oob_mode_t mode = ops->mode;
+ unsigned int mode = ops->mode;
to += ops->ooboffs;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n",
- __func__, (unsigned int) to, (int) len);
+ pr_debug("%s: to = 0x%08x, len = %i\n", __func__, (unsigned int)to,
+ (int)len);
/* Initialize retlen, in case of early exit */
ops->oobretlen = 0;
- if (mode == MTD_OOB_AUTO)
+ if (mode == MTD_OPS_AUTO_OOB)
oobsize = this->ecclayout->oobavail;
else
oobsize = mtd->oobsize;
/* We send data to spare ram with oobsize
* to prevent byte access */
memset(oobbuf, 0xff, mtd->oobsize);
- if (mode == MTD_OOB_AUTO)
+ if (mode == MTD_OPS_AUTO_OOB)
onenand_fill_auto_oob(mtd, oobbuf, buf, column, thislen);
else
memcpy(oobbuf + column, buf, thislen);
int ret;
switch (ops->mode) {
- case MTD_OOB_PLACE:
- case MTD_OOB_AUTO:
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_AUTO_OOB:
break;
- case MTD_OOB_RAW:
+ case MTD_OPS_RAW:
/* Not implemented yet */
default:
return -EINVAL;
}
/**
- * onenand_multiblock_erase - [Internal] erase block(s) using multiblock erase
+ * onenand_multiblock_erase - [INTERN] erase block(s) using multiblock erase
* @param mtd MTD device structure
* @param instr erase instruction
* @param region erase region
/**
- * onenand_block_by_block_erase - [Internal] erase block(s) using regular erase
+ * onenand_block_by_block_erase - [INTERN] erase block(s) using regular erase
* @param mtd MTD device structure
* @param instr erase instruction
* @param region erase region
struct mtd_erase_region_info *region = NULL;
loff_t region_offset = 0;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: start=0x%012llx, len=%llu\n", __func__,
- (unsigned long long) instr->addr, (unsigned long long) instr->len);
+ pr_debug("%s: start=0x%012llx, len=%llu\n", __func__,
+ (unsigned long long)instr->addr,
+ (unsigned long long)instr->len);
/* Do not allow erase past end of device */
if (unlikely((len + addr) > mtd->size)) {
*/
static void onenand_sync(struct mtd_info *mtd)
{
- DEBUG(MTD_DEBUG_LEVEL3, "%s: called\n", __func__);
+ pr_debug("%s: called\n", __func__);
/* Grab the lock and see if the device is available */
onenand_get_device(mtd, FL_SYNCING);
struct bbm_info *bbm = this->bbm;
u_char buf[2] = {0, 0};
struct mtd_oob_ops ops = {
- .mode = MTD_OOB_PLACE,
+ .mode = MTD_OPS_PLACE_OOB,
.ooblen = 2,
.oobbuf = buf,
.ooboffs = 0,
}
/**
- * onenand_otp_write_oob_nolock - [Internal] OneNAND write out-of-band, specific to OTP
+ * onenand_otp_write_oob_nolock - [INTERN] OneNAND write out-of-band, specific to OTP
* @param mtd MTD device structure
* @param to offset to write to
* @param len number of bytes to write
this->command(mtd, ONENAND_CMD_RESET, 0, 0);
this->wait(mtd, FL_RESETING);
} else {
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooblen = len;
ops.oobbuf = buf;
ops.ooboffs = 0;
else if (numbufs == 1) {
this->options |= ONENAND_HAS_4KB_PAGE;
this->options |= ONENAND_HAS_CACHE_PROGRAM;
+ /*
+ * There are two different 4KiB pagesize chips
+ * and no way to detect it by H/W config values.
+ *
+ * To detect the correct NOP for each chips,
+ * It should check the version ID as workaround.
+ *
+ * Now it has as following
+ * KFM4G16Q4M has NOP 4 with version ID 0x0131
+ * KFM4G16Q5M has NOP 1 with versoin ID 0x013e
+ */
+ if ((this->version_id & 0xf) == 0xe)
+ this->options |= ONENAND_HAS_NOP_1;
}
case ONENAND_DEVICE_DENSITY_2Gb:
int i, ret;
int block;
struct mtd_oob_ops ops = {
- .mode = MTD_OOB_PLACE,
+ .mode = MTD_OPS_PLACE_OOB,
.ooboffs = 0,
.ooblen = mtd->oobsize,
.datbuf = NULL,
this->ecclayout = &onenand_oob_128;
mtd->subpage_sft = 2;
}
+ if (ONENAND_IS_NOP_1(this))
+ mtd->subpage_sft = 0;
break;
case 64:
this->ecclayout = &onenand_oob_64;
#include <linux/slab.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/onenand.h>
+#include <linux/export.h>
/**
* check_short_pattern - [GENERIC] check if a pattern is in the buffer
startblock = 0;
from = 0;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooblen = readlen;
ops.oobbuf = buf;
ops.len = ops.ooboffs = ops.retlen = ops.oobretlen = 0;
block = (int) (onenand_block(this, offs) << 1);
res = (bbm->bbt[block >> 3] >> (block & 0x06)) & 0x03;
- DEBUG(MTD_DEBUG_LEVEL2, "onenand_isbad_bbt: bbt info for offs 0x%08x: (block %d) 0x%02x\n",
+ pr_debug("onenand_isbad_bbt: bbt info for offs 0x%08x: (block %d) 0x%02x\n",
(unsigned int) offs, block >> 1, res);
switch ((int) res) {
len = this->chipsize >> (this->erase_shift + 2);
/* Allocate memory (2bit per block) and clear the memory bad block table */
bbm->bbt = kzalloc(len, GFP_KERNEL);
- if (!bbm->bbt) {
- printk(KERN_ERR "onenand_scan_bbt: Out of memory\n");
+ if (!bbm->bbt)
return -ENOMEM;
- }
/* Set the bad block position */
bbm->badblockpos = ONENAND_BADBLOCK_POS;
struct resource *dma_res;
unsigned long phys_base;
struct completion complete;
- struct mtd_partition *parts;
};
#define CMD_MAP_00(dev, addr) (dev->cmd_map(MAP_00, ((addr) << 1)))
static struct s3c_onenand *onenand;
-static const char *part_probes[] = { "cmdlinepart", NULL, };
-
static inline int s3c_read_reg(int offset)
{
return readl(onenand->base + offset);
if (s3c_read_reg(MEM_CFG_OFFSET) & ONENAND_SYS_CFG1_SYNC_READ)
dev_info(&onenand->pdev->dev, "OneNAND Sync. Burst Read enabled\n");
- err = parse_mtd_partitions(mtd, part_probes, &onenand->parts, 0);
- if (err > 0)
- mtd_device_register(mtd, onenand->parts, err);
- else if (err <= 0 && pdata && pdata->parts)
- mtd_device_register(mtd, pdata->parts, pdata->nr_parts);
- else
- err = mtd_device_register(mtd, NULL, 0);
+ err = mtd_device_parse_register(mtd, NULL, 0,
+ pdata ? pdata->parts : NULL,
+ pdata ? pdata->nr_parts : 0);
platform_set_drvdata(pdev, mtd);
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/module.h>
struct fis_image_desc {
unsigned char name[16]; // Null terminated name
}
static int parse_redboot_partitions(struct mtd_info *master,
- struct mtd_partition **pparts,
- unsigned long fis_origin)
+ struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
{
int nrparts = 0;
struct fis_image_desc *buf;
goto out;
}
new_fl->img = &buf[i];
- if (fis_origin) {
- buf[i].flash_base -= fis_origin;
- } else {
- buf[i].flash_base &= master->size-1;
- }
+ if (data && data->origin)
+ buf[i].flash_base -= data->origin;
+ else
+ buf[i].flash_base &= master->size-1;
/* I'm sure the JFFS2 code has done me permanent damage.
* I now think the following is _normal_
.name = "RedBoot",
};
+/* mtd parsers will request the module by parser name */
+MODULE_ALIAS("RedBoot");
+
static int __init redboot_parser_init(void)
{
return register_mtd_parser(&redboot_parser);
#include <linux/vmalloc.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
+#include <linux/module.h>
#include <asm/types.h>
MODULE_PARM_DESC(debug, "Debug level (0-2)");
-/* ------------------- sysfs attributtes ---------------------------------- */
+/* ------------------- sysfs attributes ---------------------------------- */
struct sm_sysfs_attribute {
struct device_attribute dev_attr;
char *data;
if ((lba[0] & 0xF8) != 0x10)
return -2;
- /* check parity - endianess doesn't matter */
+ /* check parity - endianness doesn't matter */
if (hweight16(*(uint16_t *)lba) & 1)
return -2;
/*
- * Read LBA asscociated with block
+ * Read LBA associated with block
* returns -1, if block is erased
* returns -2 if error happens
*/
return 0;
}
- /* User might not need the oob, but we do for data vertification */
+ /* User might not need the oob, but we do for data verification */
if (!oob)
oob = &tmp_oob;
- ops.mode = ftl->smallpagenand ? MTD_OOB_RAW : MTD_OOB_PLACE;
+ ops.mode = ftl->smallpagenand ? MTD_OPS_RAW : MTD_OPS_PLACE_OOB;
ops.ooboffs = 0;
ops.ooblen = SM_OOB_SIZE;
ops.oobbuf = (void *)oob;
return ret;
}
- /* Unfortunelly, oob read will _always_ succeed,
+ /* Unfortunately, oob read will _always_ succeed,
despite card removal..... */
ret = mtd->read_oob(mtd, sm_mkoffset(ftl, zone, block, boffset), &ops);
/* Test for unknown errors */
- if (ret != 0 && ret != -EUCLEAN && ret != -EBADMSG) {
+ if (ret != 0 && !mtd_is_bitflip_or_eccerr(ret)) {
dbg("read of block %d at zone %d, failed due to error (%d)",
block, zone, ret);
goto again;
}
/* Test ECC*/
- if (ret == -EBADMSG ||
+ if (mtd_is_eccerr(ret) ||
(ftl->smallpagenand && sm_correct_sector(buffer, oob))) {
dbg("read of block %d at zone %d, failed due to ECC error",
if (ftl->unstable)
return -EIO;
- ops.mode = ftl->smallpagenand ? MTD_OOB_RAW : MTD_OOB_PLACE;
+ ops.mode = ftl->smallpagenand ? MTD_OPS_RAW : MTD_OPS_PLACE_OOB;
ops.len = SM_SECTOR_SIZE;
ops.datbuf = buffer;
ops.ooboffs = 0;
/* We aren't checking the return value, because we don't care */
/* This also fails on fake xD cards, but I guess these won't expose
- any bad blocks till fail completly */
+ any bad blocks till fail completely */
for (boffset = 0; boffset < ftl->block_size; boffset += SM_SECTOR_SIZE)
sm_write_sector(ftl, zone, block, boffset, NULL, &oob);
}
/*
* Erase a block within a zone
- * If erase succedes, it updates free block fifo, otherwise marks block as bad
+ * If erase succeeds, it updates free block fifo, otherwise marks block as bad
*/
static int sm_erase_block(struct sm_ftl *ftl, int zone_num, uint16_t block,
int put_free)
complete(&ftl->erase_completion);
}
-/* Throughtly test that block is valid. */
+/* Thoroughly test that block is valid. */
static int sm_check_block(struct sm_ftl *ftl, int zone, int block)
{
int boffset;
for (boffset = 0; boffset < ftl->block_size;
boffset += SM_SECTOR_SIZE) {
- /* This shoudn't happen anyway */
+ /* This shouldn't happen anyway */
if (sm_read_sector(ftl, zone, block, boffset, NULL, &oob))
return -2;
/* Found */
cis_sector = (int)(offset >> SECTOR_SHIFT);
} else {
- DEBUG(MTD_DEBUG_LEVEL1,
- "SSFDC_RO: CIS/IDI sector not found"
+ pr_debug("SSFDC_RO: CIS/IDI sector not found"
" on %s (mtd%d)\n", mtd->name,
mtd->index);
}
struct mtd_oob_ops ops;
int ret;
- ops.mode = MTD_OOB_RAW;
+ ops.mode = MTD_OPS_RAW;
ops.ooboffs = 0;
ops.ooblen = OOB_SIZE;
ops.oobbuf = buf;
block_address >>= 1;
if (get_parity(block_address, 10) != parity) {
- DEBUG(MTD_DEBUG_LEVEL0,
- "SSFDC_RO: logical address field%d"
+ pr_debug("SSFDC_RO: logical address field%d"
"parity error(0x%04X)\n", j+1,
block_address);
} else {
if (!ok)
block_address = -2;
- DEBUG(MTD_DEBUG_LEVEL3, "SSFDC_RO: get_logical_address() %d\n",
+ pr_debug("SSFDC_RO: get_logical_address() %d\n",
block_address);
return block_address;
int ret, block_address, phys_block;
struct mtd_info *mtd = ssfdc->mbd.mtd;
- DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: build_block_map() nblks=%d (%luK)\n",
+ pr_debug("SSFDC_RO: build_block_map() nblks=%d (%luK)\n",
ssfdc->map_len,
(unsigned long)ssfdc->map_len * ssfdc->erase_size / 1024);
ret = read_raw_oob(mtd, offset, oob_buf);
if (ret < 0) {
- DEBUG(MTD_DEBUG_LEVEL0,
- "SSFDC_RO: mtd read_oob() failed at %lu\n",
+ pr_debug("SSFDC_RO: mtd read_oob() failed at %lu\n",
offset);
return -1;
}
ssfdc->logic_block_map[block_address] =
(unsigned short)phys_block;
- DEBUG(MTD_DEBUG_LEVEL2,
- "SSFDC_RO: build_block_map() phys_block=%d,"
+ pr_debug("SSFDC_RO: build_block_map() phys_block=%d,"
"logic_block_addr=%d, zone=%d\n",
phys_block, block_address, zone_index);
}
return;
ssfdc = kzalloc(sizeof(struct ssfdcr_record), GFP_KERNEL);
- if (!ssfdc) {
- printk(KERN_WARNING
- "SSFDC_RO: out of memory for data structures\n");
+ if (!ssfdc)
return;
- }
ssfdc->mbd.mtd = mtd;
ssfdc->mbd.devnum = -1;
ssfdc->erase_size = mtd->erasesize;
ssfdc->map_len = (u32)mtd->size / mtd->erasesize;
- DEBUG(MTD_DEBUG_LEVEL1,
- "SSFDC_RO: cis_block=%d,erase_size=%d,map_len=%d,n_zones=%d\n",
+ pr_debug("SSFDC_RO: cis_block=%d,erase_size=%d,map_len=%d,n_zones=%d\n",
ssfdc->cis_block, ssfdc->erase_size, ssfdc->map_len,
DIV_ROUND_UP(ssfdc->map_len, MAX_PHYS_BLK_PER_ZONE));
ssfdc->cylinders = (unsigned short)(((u32)mtd->size >> SECTOR_SHIFT) /
((long)ssfdc->sectors * (long)ssfdc->heads));
- DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: using C:%d H:%d S:%d == %ld sects\n",
+ pr_debug("SSFDC_RO: using C:%d H:%d S:%d == %ld sects\n",
ssfdc->cylinders, ssfdc->heads , ssfdc->sectors,
(long)ssfdc->cylinders * (long)ssfdc->heads *
(long)ssfdc->sectors);
/* Allocate logical block map */
ssfdc->logic_block_map = kmalloc(sizeof(ssfdc->logic_block_map[0]) *
ssfdc->map_len, GFP_KERNEL);
- if (!ssfdc->logic_block_map) {
- printk(KERN_WARNING
- "SSFDC_RO: out of memory for data structures\n");
+ if (!ssfdc->logic_block_map)
goto out_err;
- }
memset(ssfdc->logic_block_map, 0xff, sizeof(ssfdc->logic_block_map[0]) *
ssfdc->map_len);
{
struct ssfdcr_record *ssfdc = (struct ssfdcr_record *)dev;
- DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: remove_dev (i=%d)\n", dev->devnum);
+ pr_debug("SSFDC_RO: remove_dev (i=%d)\n", dev->devnum);
del_mtd_blktrans_dev(dev);
kfree(ssfdc->logic_block_map);
offset = (int)(logic_sect_no % sectors_per_block);
block_address = (int)(logic_sect_no / sectors_per_block);
- DEBUG(MTD_DEBUG_LEVEL3,
- "SSFDC_RO: ssfdcr_readsect(%lu) sec_per_blk=%d, ofst=%d,"
+ pr_debug("SSFDC_RO: ssfdcr_readsect(%lu) sec_per_blk=%d, ofst=%d,"
" block_addr=%d\n", logic_sect_no, sectors_per_block, offset,
block_address);
block_address = ssfdc->logic_block_map[block_address];
- DEBUG(MTD_DEBUG_LEVEL3,
- "SSFDC_RO: ssfdcr_readsect() phys_block_addr=%d\n",
+ pr_debug("SSFDC_RO: ssfdcr_readsect() phys_block_addr=%d\n",
block_address);
if (block_address < 0xffff) {
sect_no = (unsigned long)block_address * sectors_per_block +
offset;
- DEBUG(MTD_DEBUG_LEVEL3,
- "SSFDC_RO: ssfdcr_readsect() phys_sect_no=%lu\n",
+ pr_debug("SSFDC_RO: ssfdcr_readsect() phys_sect_no=%lu\n",
sect_no);
if (read_physical_sector(ssfdc->mbd.mtd, buf, sect_no) < 0)
{
struct ssfdcr_record *ssfdc = (struct ssfdcr_record *)dev;
- DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: ssfdcr_getgeo() C=%d, H=%d, S=%d\n",
+ pr_debug("SSFDC_RO: ssfdcr_getgeo() C=%d, H=%d, S=%d\n",
ssfdc->cylinders, ssfdc->heads, ssfdc->sectors);
geo->heads = ssfdc->heads;
#define PRINT_PREF KERN_INFO "mtd_oobtest: "
-static int dev;
+static int dev = -EINVAL;
module_param(dev, int, S_IRUGO);
MODULE_PARM_DESC(dev, "MTD device number to use");
for (i = 0; i < pgcnt; ++i, addr += mtd->writesize) {
set_random_data(writebuf, use_len);
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = use_len;
for (i = 0; i < pgcnt; ++i, addr += mtd->writesize) {
set_random_data(writebuf, use_len);
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = use_len;
if (use_offset != 0 || use_len < mtd->ecclayout->oobavail) {
int k;
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = mtd->ecclayout->oobavail;
size_t len = mtd->ecclayout->oobavail * pgcnt;
set_random_data(writebuf, len);
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = len;
printk(KERN_INFO "\n");
printk(KERN_INFO "=================================================\n");
+
+ if (dev < 0) {
+ printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
+ printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
+ return -EINVAL;
+ }
+
printk(PRINT_PREF "MTD device: %d\n", dev);
mtd = get_mtd_device(NULL, dev);
addr0 += mtd->erasesize;
/* Attempt to write off end of OOB */
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = 1;
}
/* Attempt to read off end of OOB */
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = 1;
"block is bad\n");
else {
/* Attempt to write off end of device */
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = mtd->ecclayout->oobavail + 1;
}
/* Attempt to read off end of device */
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = mtd->ecclayout->oobavail + 1;
goto out;
/* Attempt to write off end of device */
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = mtd->ecclayout->oobavail;
}
/* Attempt to read off end of device */
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = mtd->ecclayout->oobavail;
addr = (i + 1) * mtd->erasesize - mtd->writesize;
for (pg = 0; pg < cnt; ++pg) {
set_random_data(writebuf, sz);
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = sz;
continue;
set_random_data(writebuf, mtd->ecclayout->oobavail * 2);
addr = (i + 1) * mtd->erasesize - mtd->writesize;
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = mtd->ecclayout->oobavail * 2;
#define PRINT_PREF KERN_INFO "mtd_pagetest: "
-static int dev;
+static int dev = -EINVAL;
module_param(dev, int, S_IRUGO);
MODULE_PARM_DESC(dev, "MTD device number to use");
for (j = 0; j < pgcnt - 1; ++j, addr += pgsize) {
/* Do a read to set the internal dataRAMs to different data */
err = mtd->read(mtd, addr0, bufsize, &read, twopages);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != bufsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
return err;
}
err = mtd->read(mtd, addrn - bufsize, bufsize, &read, twopages);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != bufsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
memset(twopages, 0, bufsize);
read = 0;
err = mtd->read(mtd, addr, bufsize, &read, twopages);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != bufsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
unsigned long oldnext = next;
/* Do a read to set the internal dataRAMs to different data */
err = mtd->read(mtd, addr0, bufsize, &read, twopages);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != bufsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
return err;
}
err = mtd->read(mtd, addrn - bufsize, bufsize, &read, twopages);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != bufsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
memset(twopages, 0, bufsize);
read = 0;
err = mtd->read(mtd, addr, bufsize, &read, twopages);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != bufsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
read = 0;
addr = addrn - pgsize - pgsize;
err = mtd->read(mtd, addr, pgsize, &read, pp1);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
read = 0;
addr = addrn - pgsize - pgsize - pgsize;
err = mtd->read(mtd, addr, pgsize, &read, pp1);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
addr = addr0;
printk(PRINT_PREF "reading page at %#llx\n", (long long)addr);
err = mtd->read(mtd, addr, pgsize, &read, pp2);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
addr = addrn - pgsize;
printk(PRINT_PREF "reading page at %#llx\n", (long long)addr);
err = mtd->read(mtd, addr, pgsize, &read, pp3);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
addr = addr0;
printk(PRINT_PREF "reading page at %#llx\n", (long long)addr);
err = mtd->read(mtd, addr, pgsize, &read, pp4);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
printk(PRINT_PREF "reading 1st page of block %d\n", ebnum);
memset(readbuf, 0, pgsize);
err = mtd->read(mtd, addr0, pgsize, &read, readbuf);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
printk(PRINT_PREF "reading 1st page of block %d\n", ebnum);
memset(readbuf, 0, pgsize);
err = mtd->read(mtd, addr0, pgsize, &read, readbuf);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
printk(PRINT_PREF "reading 1st page of block %d\n", ebnum);
err = mtd->read(mtd, addr0, pgsize, &read, twopages);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
printk(KERN_INFO "\n");
printk(KERN_INFO "=================================================\n");
+
+ if (dev < 0) {
+ printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
+ printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
+ return -EINVAL;
+ }
+
printk(PRINT_PREF "MTD device: %d\n", dev);
mtd = get_mtd_device(NULL, dev);
#define PRINT_PREF KERN_INFO "mtd_readtest: "
-static int dev;
+static int dev = -EINVAL;
module_param(dev, int, S_IRUGO);
MODULE_PARM_DESC(dev, "MTD device number to use");
if (mtd->oobsize) {
struct mtd_oob_ops ops;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = mtd->oobsize;
ops.datbuf = NULL;
ops.oobbuf = oobbuf;
ret = mtd->read_oob(mtd, addr, &ops);
- if (ret || ops.oobretlen != mtd->oobsize) {
+ if ((ret && !mtd_is_bitflip(ret)) ||
+ ops.oobretlen != mtd->oobsize) {
printk(PRINT_PREF "error: read oob failed at "
"%#llx\n", (long long)addr);
if (!err)
printk(KERN_INFO "\n");
printk(KERN_INFO "=================================================\n");
+
+ if (dev < 0) {
+ printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
+ return -EINVAL;
+ }
+
printk(PRINT_PREF "MTD device: %d\n", dev);
mtd = get_mtd_device(NULL, dev);
#define PRINT_PREF KERN_INFO "mtd_speedtest: "
-static int dev;
+static int dev = -EINVAL;
module_param(dev, int, S_IRUGO);
MODULE_PARM_DESC(dev, "MTD device number to use");
err = mtd->read(mtd, addr, mtd->erasesize, &read, iobuf);
/* Ignore corrected ECC errors */
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != mtd->erasesize) {
printk(PRINT_PREF "error: read failed at %#llx\n", addr);
for (i = 0; i < pgcnt; i++) {
err = mtd->read(mtd, addr, pgsize, &read, buf);
/* Ignore corrected ECC errors */
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
for (i = 0; i < n; i++) {
err = mtd->read(mtd, addr, sz, &read, buf);
/* Ignore corrected ECC errors */
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != sz) {
printk(PRINT_PREF "error: read failed at %#llx\n",
if (pgcnt % 2) {
err = mtd->read(mtd, addr, pgsize, &read, buf);
/* Ignore corrected ECC errors */
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (err || read != pgsize) {
printk(PRINT_PREF "error: read failed at %#llx\n",
printk(KERN_INFO "\n");
printk(KERN_INFO "=================================================\n");
+
+ if (dev < 0) {
+ printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
+ printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
+ return -EINVAL;
+ }
+
if (count)
printk(PRINT_PREF "MTD device: %d count: %d\n", dev, count);
else
#define PRINT_PREF KERN_INFO "mtd_stresstest: "
-static int dev;
+static int dev = -EINVAL;
module_param(dev, int, S_IRUGO);
MODULE_PARM_DESC(dev, "MTD device number to use");
}
addr = eb * mtd->erasesize + offs;
err = mtd->read(mtd, addr, len, &read, readbuf);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
err = 0;
if (unlikely(err || read != len)) {
printk(PRINT_PREF "error: read failed at 0x%llx\n",
printk(KERN_INFO "\n");
printk(KERN_INFO "=================================================\n");
+
+ if (dev < 0) {
+ printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
+ printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
+ return -EINVAL;
+ }
+
printk(PRINT_PREF "MTD device: %d\n", dev);
mtd = get_mtd_device(NULL, dev);
#define PRINT_PREF KERN_INFO "mtd_subpagetest: "
-static int dev;
+static int dev = -EINVAL;
module_param(dev, int, S_IRUGO);
MODULE_PARM_DESC(dev, "MTD device number to use");
read = 0;
err = mtd->read(mtd, addr, subpgsize, &read, readbuf);
if (unlikely(err || read != subpgsize)) {
- if (err == -EUCLEAN && read == subpgsize) {
+ if (mtd_is_bitflip(err) && read == subpgsize) {
printk(PRINT_PREF "ECC correction at %#llx\n",
(long long)addr);
err = 0;
read = 0;
err = mtd->read(mtd, addr, subpgsize, &read, readbuf);
if (unlikely(err || read != subpgsize)) {
- if (err == -EUCLEAN && read == subpgsize) {
+ if (mtd_is_bitflip(err) && read == subpgsize) {
printk(PRINT_PREF "ECC correction at %#llx\n",
(long long)addr);
err = 0;
read = 0;
err = mtd->read(mtd, addr, subpgsize * k, &read, readbuf);
if (unlikely(err || read != subpgsize * k)) {
- if (err == -EUCLEAN && read == subpgsize * k) {
+ if (mtd_is_bitflip(err) && read == subpgsize * k) {
printk(PRINT_PREF "ECC correction at %#llx\n",
(long long)addr);
err = 0;
read = 0;
err = mtd->read(mtd, addr, subpgsize, &read, readbuf);
if (unlikely(err || read != subpgsize)) {
- if (err == -EUCLEAN && read == subpgsize) {
+ if (mtd_is_bitflip(err) && read == subpgsize) {
printk(PRINT_PREF "ECC correction at %#llx\n",
(long long)addr);
err = 0;
printk(KERN_INFO "\n");
printk(KERN_INFO "=================================================\n");
+
+ if (dev < 0) {
+ printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
+ printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
+ return -EINVAL;
+ }
+
printk(PRINT_PREF "MTD device: %d\n", dev);
mtd = get_mtd_device(NULL, dev);
module_param(pgcnt, int, S_IRUGO);
MODULE_PARM_DESC(pgcnt, "number of pages per eraseblock to torture (0 => all)");
-static int dev;
+static int dev = -EINVAL;
module_param(dev, int, S_IRUGO);
MODULE_PARM_DESC(dev, "MTD device number to use");
retry:
err = mtd->read(mtd, addr, len, &read, check_buf);
- if (err == -EUCLEAN)
+ if (mtd_is_bitflip(err))
printk(PRINT_PREF "single bit flip occurred at EB %d "
"MTD reported that it was fixed.\n", ebnum);
else if (err) {
printk(KERN_INFO "=================================================\n");
printk(PRINT_PREF "Warning: this program is trying to wear out your "
"flash, stop it if this is not wanted.\n");
+
+ if (dev < 0) {
+ printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
+ printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
+ return -EINVAL;
+ }
+
printk(PRINT_PREF "MTD device: %d\n", dev);
printk(PRINT_PREF "torture %d eraseblocks (%d-%d) of mtd%d\n",
ebcnt, eb, eb + ebcnt - 1, dev);
if (err == UBI_IO_BITFLIPS) {
scrub = 1;
err = 0;
- } else if (err == -EBADMSG) {
+ } else if (mtd_is_eccerr(err)) {
if (vol->vol_type == UBI_DYNAMIC_VOLUME)
goto out_unlock;
scrub = 1;
retry:
err = ubi->mtd->read(ubi->mtd, addr, len, &read, buf);
if (err) {
- const char *errstr = (err == -EBADMSG) ? " (ECC error)" : "";
+ const char *errstr = mtd_is_eccerr(err) ? " (ECC error)" : "";
- if (err == -EUCLEAN) {
+ if (mtd_is_bitflip(err)) {
/*
* -EUCLEAN is reported if there was a bit-flip which
* was corrected, so this is harmless.
* all the requested data. But some buggy drivers might do
* this, so we change it to -EIO.
*/
- if (read != len && err == -EBADMSG) {
+ if (read != len && mtd_is_eccerr(err)) {
ubi_assert(0);
err = -EIO;
}
out:
mutex_unlock(&ubi->buf_mutex);
- if (err == UBI_IO_BITFLIPS || err == -EBADMSG) {
+ if (err == UBI_IO_BITFLIPS || mtd_is_eccerr(err)) {
/*
* If a bit-flip or data integrity error was detected, the test
* has not passed because it happened on a freshly erased
read_err = ubi_io_read(ubi, ec_hdr, pnum, 0, UBI_EC_HDR_SIZE);
if (read_err) {
- if (read_err != UBI_IO_BITFLIPS && read_err != -EBADMSG)
+ if (read_err != UBI_IO_BITFLIPS && !mtd_is_eccerr(read_err))
return read_err;
/*
magic = be32_to_cpu(ec_hdr->magic);
if (magic != UBI_EC_HDR_MAGIC) {
- if (read_err == -EBADMSG)
+ if (mtd_is_eccerr(read_err))
return UBI_IO_BAD_HDR_EBADMSG;
/*
p = (char *)vid_hdr - ubi->vid_hdr_shift;
read_err = ubi_io_read(ubi, p, pnum, ubi->vid_hdr_aloffset,
ubi->vid_hdr_alsize);
- if (read_err && read_err != UBI_IO_BITFLIPS && read_err != -EBADMSG)
+ if (read_err && read_err != UBI_IO_BITFLIPS && !mtd_is_eccerr(read_err))
return read_err;
magic = be32_to_cpu(vid_hdr->magic);
if (magic != UBI_VID_HDR_MAGIC) {
- if (read_err == -EBADMSG)
+ if (mtd_is_eccerr(read_err))
return UBI_IO_BAD_HDR_EBADMSG;
if (ubi_check_pattern(vid_hdr, 0xFF, UBI_VID_HDR_SIZE)) {
return -ENOMEM;
err = ubi_io_read(ubi, ec_hdr, pnum, 0, UBI_EC_HDR_SIZE);
- if (err && err != UBI_IO_BITFLIPS && err != -EBADMSG)
+ if (err && err != UBI_IO_BITFLIPS && !mtd_is_eccerr(err))
goto exit;
crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC);
p = (char *)vid_hdr - ubi->vid_hdr_shift;
err = ubi_io_read(ubi, p, pnum, ubi->vid_hdr_aloffset,
ubi->vid_hdr_alsize);
- if (err && err != UBI_IO_BITFLIPS && err != -EBADMSG)
+ if (err && err != UBI_IO_BITFLIPS && !mtd_is_eccerr(err))
goto exit;
crc = crc32(UBI_CRC32_INIT, vid_hdr, UBI_EC_HDR_SIZE_CRC);
}
err = ubi->mtd->read(ubi->mtd, addr, len, &read, buf1);
- if (err && err != -EUCLEAN)
+ if (err && !mtd_is_bitflip(err))
goto out_free;
for (i = 0; i < len; i++) {
}
err = ubi->mtd->read(ubi->mtd, addr, len, &read, buf);
- if (err && err != -EUCLEAN) {
+ if (err && !mtd_is_bitflip(err)) {
ubi_err("error %d while reading %d bytes from PEB %d:%d, "
"read %zd bytes", err, len, pnum, offset, read);
goto error;
return 0;
err = ubi_eba_read_leb(ubi, vol, lnum, buf, offset, len, check);
- if (err && err == -EBADMSG && vol->vol_type == UBI_STATIC_VOLUME) {
+ if (err && mtd_is_eccerr(err) && vol->vol_type == UBI_STATIC_VOLUME) {
ubi_warn("mark volume %d as corrupted", vol_id);
vol->corrupted = 1;
}
err = ubi_eba_read_leb(ubi, vol, i, buf, 0, size, 1);
if (err) {
- if (err == -EBADMSG)
+ if (mtd_is_eccerr(err))
err = 1;
break;
}
}
err = ubi_io_read_data(ubi, buf, pnum, 0, len);
- if (err && err != UBI_IO_BITFLIPS && err != -EBADMSG)
+ if (err && err != UBI_IO_BITFLIPS && !mtd_is_eccerr(err))
goto out_free_buf;
data_crc = be32_to_cpu(vid_hdr->data_crc);
err = ubi_io_read(ubi, ubi->peb_buf1, pnum, ubi->leb_start,
ubi->leb_size);
- if (err == UBI_IO_BITFLIPS || err == -EBADMSG) {
+ if (err == UBI_IO_BITFLIPS || mtd_is_eccerr(err)) {
/*
* Bit-flips or integrity errors while reading the data area.
* It is difficult to say for sure what type of corruption is
#include <linux/err.h>
#include <linux/math64.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include "ubi.h"
#ifdef CONFIG_MTD_UBI_DEBUG
err = ubi_io_read_data(ubi, leb[seb->lnum], seb->pnum, 0,
ubi->vtbl_size);
- if (err == UBI_IO_BITFLIPS || err == -EBADMSG)
+ if (err == UBI_IO_BITFLIPS || mtd_is_eccerr(err))
/*
* Scrub the PEB later. Note, -EBADMSG indicates an
* uncorrectable ECC error, but we have our own CRC and
source "drivers/net/fddi/Kconfig"
+source "drivers/net/hippi/Kconfig"
+
config NET_SB1000
tristate "General Instruments Surfboard 1000"
depends on PNP
u32 slave_speed;
int res;
- slave->speed = -1;
- slave->duplex = -1;
+ slave->speed = SPEED_UNKNOWN;
+ slave->duplex = DUPLEX_UNKNOWN;
res = __ethtool_get_settings(slave_dev, &ecmd);
if (res < 0)
#include <linux/proc_fs.h>
+#include <linux/export.h>
#include <net/net_namespace.h>
#include <net/netns/generic.h>
#include "bonding.h"
seq_printf(seq, "\nSlave Interface: %s\n", slave->dev->name);
seq_printf(seq, "MII Status: %s\n",
(slave->link == BOND_LINK_UP) ? "up" : "down");
- if (slave->speed == -1)
+ if (slave->speed == SPEED_UNKNOWN)
seq_printf(seq, "Speed: %s\n", "Unknown");
else
seq_printf(seq, "Speed: %d Mbps\n", slave->speed);
- if (slave->duplex == -1)
+ if (slave->duplex == DUPLEX_UNKNOWN)
seq_printf(seq, "Duplex: %s\n", "Unknown");
else
seq_printf(seq, "Duplex: %s\n", slave->duplex ? "full" : "half");
goto out;
}
+ if (bond->slave_cnt > 0) {
+ pr_err("unable to update mode of %s because it has slaves.\n",
+ bond->dev->name);
+ ret = -EPERM;
+ goto out;
+ }
+
new_value = bond_parse_parm(buf, bond_mode_tbl);
if (new_value < 0) {
pr_err("%s: Ignoring invalid mode value %.*s.\n",
int bnx2x_init_firmware(struct bnx2x *bp)
{
- const char *fw_file_name;
struct bnx2x_fw_file_hdr *fw_hdr;
int rc;
- if (CHIP_IS_E1(bp))
- fw_file_name = FW_FILE_NAME_E1;
- else if (CHIP_IS_E1H(bp))
- fw_file_name = FW_FILE_NAME_E1H;
- else if (!CHIP_IS_E1x(bp))
- fw_file_name = FW_FILE_NAME_E2;
- else {
- BNX2X_ERR("Unsupported chip revision\n");
- return -EINVAL;
- }
- BNX2X_DEV_INFO("Loading %s\n", fw_file_name);
+ if (!bp->firmware) {
+ const char *fw_file_name;
- rc = request_firmware(&bp->firmware, fw_file_name, &bp->pdev->dev);
- if (rc) {
- BNX2X_ERR("Can't load firmware file %s\n", fw_file_name);
- goto request_firmware_exit;
- }
+ if (CHIP_IS_E1(bp))
+ fw_file_name = FW_FILE_NAME_E1;
+ else if (CHIP_IS_E1H(bp))
+ fw_file_name = FW_FILE_NAME_E1H;
+ else if (!CHIP_IS_E1x(bp))
+ fw_file_name = FW_FILE_NAME_E2;
+ else {
+ BNX2X_ERR("Unsupported chip revision\n");
+ return -EINVAL;
+ }
+ BNX2X_DEV_INFO("Loading %s\n", fw_file_name);
- rc = bnx2x_check_firmware(bp);
- if (rc) {
- BNX2X_ERR("Corrupt firmware file %s\n", fw_file_name);
- goto request_firmware_exit;
+ rc = request_firmware(&bp->firmware, fw_file_name,
+ &bp->pdev->dev);
+ if (rc) {
+ BNX2X_ERR("Can't load firmware file %s\n",
+ fw_file_name);
+ goto request_firmware_exit;
+ }
+
+ rc = bnx2x_check_firmware(bp);
+ if (rc) {
+ BNX2X_ERR("Corrupt firmware file %s\n", fw_file_name);
+ goto request_firmware_exit;
+ }
}
fw_hdr = (struct bnx2x_fw_file_hdr *)bp->firmware->data;
kfree(bp->init_ops);
kfree(bp->init_data);
release_firmware(bp->firmware);
+ bp->firmware = NULL;
}
if (bp->doorbells)
iounmap(bp->doorbells);
+ bnx2x_release_firmware(bp);
+
bnx2x_free_mem_bp(bp);
free_netdev(dev);
rc = drv->init_fw(bp);
if (rc) {
BNX2X_ERR("Error loading firmware\n");
- goto fw_init_err;
+ goto init_err;
}
/* Handle the beginning of COMMON_XXX pases separatelly... */
case FW_MSG_CODE_DRV_LOAD_COMMON_CHIP:
rc = bnx2x_func_init_cmn_chip(bp, drv);
if (rc)
- goto init_hw_err;
+ goto init_err;
break;
case FW_MSG_CODE_DRV_LOAD_COMMON:
rc = bnx2x_func_init_cmn(bp, drv);
if (rc)
- goto init_hw_err;
+ goto init_err;
break;
case FW_MSG_CODE_DRV_LOAD_PORT:
rc = bnx2x_func_init_port(bp, drv);
if (rc)
- goto init_hw_err;
+ goto init_err;
break;
case FW_MSG_CODE_DRV_LOAD_FUNCTION:
rc = bnx2x_func_init_func(bp, drv);
if (rc)
- goto init_hw_err;
+ goto init_err;
break;
default:
rc = -EINVAL;
}
-init_hw_err:
- drv->release_fw(bp);
-
-fw_init_err:
+init_err:
drv->gunzip_end(bp);
/* In case of success, complete the comand immediatelly: no ramrods
#define DRV_MODULE_NAME "tg3"
#define TG3_MAJ_NUM 3
-#define TG3_MIN_NUM 120
+#define TG3_MIN_NUM 121
#define DRV_MODULE_VERSION \
__stringify(TG3_MAJ_NUM) "." __stringify(TG3_MIN_NUM)
-#define DRV_MODULE_RELDATE "August 18, 2011"
+#define DRV_MODULE_RELDATE "November 2, 2011"
#define RESET_KIND_SHUTDOWN 0
#define RESET_KIND_INIT 1
regbase = TG3_APE_PER_LOCK_GRANT;
/* Make sure the driver hasn't any stale locks. */
- for (i = 0; i < 8; i++) {
- if (i == TG3_APE_LOCK_GPIO)
- continue;
- tg3_ape_write32(tp, regbase + 4 * i, APE_LOCK_GRANT_DRIVER);
+ for (i = TG3_APE_LOCK_PHY0; i <= TG3_APE_LOCK_GPIO; i++) {
+ switch (i) {
+ case TG3_APE_LOCK_PHY0:
+ case TG3_APE_LOCK_PHY1:
+ case TG3_APE_LOCK_PHY2:
+ case TG3_APE_LOCK_PHY3:
+ bit = APE_LOCK_GRANT_DRIVER;
+ break;
+ default:
+ if (!tp->pci_fn)
+ bit = APE_LOCK_GRANT_DRIVER;
+ else
+ bit = 1 << tp->pci_fn;
+ }
+ tg3_ape_write32(tp, regbase + 4 * i, bit);
}
- /* Clear the correct bit of the GPIO lock too. */
- if (!tp->pci_fn)
- bit = APE_LOCK_GRANT_DRIVER;
- else
- bit = 1 << tp->pci_fn;
-
- tg3_ape_write32(tp, regbase + 4 * TG3_APE_LOCK_GPIO, bit);
}
static int tg3_ape_lock(struct tg3 *tp, int locknum)
return 0;
case TG3_APE_LOCK_GRC:
case TG3_APE_LOCK_MEM:
+ if (!tp->pci_fn)
+ bit = APE_LOCK_REQ_DRIVER;
+ else
+ bit = 1 << tp->pci_fn;
break;
default:
return -EINVAL;
off = 4 * locknum;
- if (locknum != TG3_APE_LOCK_GPIO || !tp->pci_fn)
- bit = APE_LOCK_REQ_DRIVER;
- else
- bit = 1 << tp->pci_fn;
-
tg3_ape_write32(tp, req + off, bit);
/* Wait for up to 1 millisecond to acquire lock. */
return;
case TG3_APE_LOCK_GRC:
case TG3_APE_LOCK_MEM:
+ if (!tp->pci_fn)
+ bit = APE_LOCK_GRANT_DRIVER;
+ else
+ bit = 1 << tp->pci_fn;
break;
default:
return;
else
gnt = TG3_APE_PER_LOCK_GRANT;
- if (locknum != TG3_APE_LOCK_GPIO || !tp->pci_fn)
- bit = APE_LOCK_GRANT_DRIVER;
- else
- bit = 1 << tp->pci_fn;
-
tg3_ape_write32(tp, gnt + 4 * locknum, bit);
}
return work_done;
}
+static inline void tg3_reset_task_schedule(struct tg3 *tp)
+{
+ if (!test_and_set_bit(TG3_FLAG_RESET_TASK_PENDING, tp->tg3_flags))
+ schedule_work(&tp->reset_task);
+}
+
+static inline void tg3_reset_task_cancel(struct tg3 *tp)
+{
+ cancel_work_sync(&tp->reset_task);
+ tg3_flag_clear(tp, RESET_TASK_PENDING);
+}
+
static int tg3_poll_msix(struct napi_struct *napi, int budget)
{
struct tg3_napi *tnapi = container_of(napi, struct tg3_napi, napi);
tx_recovery:
/* work_done is guaranteed to be less than budget. */
napi_complete(napi);
- schedule_work(&tp->reset_task);
+ tg3_reset_task_schedule(tp);
return work_done;
}
tg3_dump_state(tp);
tg3_flag_set(tp, ERROR_PROCESSED);
- schedule_work(&tp->reset_task);
+ tg3_reset_task_schedule(tp);
}
static int tg3_poll(struct napi_struct *napi, int budget)
tx_recovery:
/* work_done is guaranteed to be less than budget. */
napi_complete(napi);
- schedule_work(&tp->reset_task);
+ tg3_reset_task_schedule(tp);
return work_done;
}
{
struct tg3 *tp = container_of(work, struct tg3, reset_task);
int err;
- unsigned int restart_timer;
tg3_full_lock(tp, 0);
if (!netif_running(tp->dev)) {
+ tg3_flag_clear(tp, RESET_TASK_PENDING);
tg3_full_unlock(tp);
return;
}
tg3_full_lock(tp, 1);
- restart_timer = tg3_flag(tp, RESTART_TIMER);
- tg3_flag_clear(tp, RESTART_TIMER);
-
if (tg3_flag(tp, TX_RECOVERY_PENDING)) {
tp->write32_tx_mbox = tg3_write32_tx_mbox;
tp->write32_rx_mbox = tg3_write_flush_reg32;
tg3_netif_start(tp);
- if (restart_timer)
- mod_timer(&tp->timer, jiffies + 1);
-
out:
tg3_full_unlock(tp);
if (!err)
tg3_phy_start(tp);
+
+ tg3_flag_clear(tp, RESET_TASK_PENDING);
}
static void tg3_tx_timeout(struct net_device *dev)
tg3_dump_state(tp);
}
- schedule_work(&tp->reset_task);
+ tg3_reset_task_schedule(tp);
}
/* Test for DMA buffers crossing any 4GB boundaries: 4G, 8G, etc */
hwbug = 1;
if (tg3_flag(tp, 4K_FIFO_LIMIT)) {
+ u32 prvidx = *entry;
u32 tmp_flag = flags & ~TXD_FLAG_END;
- while (len > TG3_TX_BD_DMA_MAX) {
+ while (len > TG3_TX_BD_DMA_MAX && *budget) {
u32 frag_len = TG3_TX_BD_DMA_MAX;
len -= TG3_TX_BD_DMA_MAX;
- if (len) {
- tnapi->tx_buffers[*entry].fragmented = true;
- /* Avoid the 8byte DMA problem */
- if (len <= 8) {
- len += TG3_TX_BD_DMA_MAX / 2;
- frag_len = TG3_TX_BD_DMA_MAX / 2;
- }
- } else
- tmp_flag = flags;
-
- if (*budget) {
- tg3_tx_set_bd(&tnapi->tx_ring[*entry], map,
- frag_len, tmp_flag, mss, vlan);
- (*budget)--;
- *entry = NEXT_TX(*entry);
- } else {
- hwbug = 1;
- break;
+ /* Avoid the 8byte DMA problem */
+ if (len <= 8) {
+ len += TG3_TX_BD_DMA_MAX / 2;
+ frag_len = TG3_TX_BD_DMA_MAX / 2;
}
+ tnapi->tx_buffers[*entry].fragmented = true;
+
+ tg3_tx_set_bd(&tnapi->tx_ring[*entry], map,
+ frag_len, tmp_flag, mss, vlan);
+ *budget -= 1;
+ prvidx = *entry;
+ *entry = NEXT_TX(*entry);
+
map += frag_len;
}
if (*budget) {
tg3_tx_set_bd(&tnapi->tx_ring[*entry], map,
len, flags, mss, vlan);
- (*budget)--;
+ *budget -= 1;
*entry = NEXT_TX(*entry);
} else {
hwbug = 1;
+ tnapi->tx_buffers[prvidx].fragmented = false;
}
}
} else {
txb = &tnapi->tx_buffers[entry];
}
- for (i = 0; i < last; i++) {
+ for (i = 0; i <= last; i++) {
const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
entry = NEXT_TX(entry);
dev_kfree_skb(new_skb);
ret = -1;
} else {
+ u32 save_entry = *entry;
+
base_flags |= TXD_FLAG_END;
tnapi->tx_buffers[*entry].skb = new_skb;
if (tg3_tx_frag_set(tnapi, entry, budget, new_addr,
new_skb->len, base_flags,
mss, vlan)) {
- tg3_tx_skb_unmap(tnapi, *entry, 0);
+ tg3_tx_skb_unmap(tnapi, save_entry, -1);
dev_kfree_skb(new_skb);
ret = -1;
}
if (tg3_tx_frag_set(tnapi, &entry, &budget, mapping, len, base_flags |
((skb_shinfo(skb)->nr_frags == 0) ? TXD_FLAG_END : 0),
- mss, vlan))
+ mss, vlan)) {
would_hit_hwbug = 1;
-
/* Now loop through additional data fragments, and queue them. */
- if (skb_shinfo(skb)->nr_frags > 0) {
+ } else if (skb_shinfo(skb)->nr_frags > 0) {
u32 tmp_mss = mss;
if (!tg3_flag(tp, HW_TSO_1) &&
if (dma_mapping_error(&tp->pdev->dev, mapping))
goto dma_error;
- if (tg3_tx_frag_set(tnapi, &entry, &budget, mapping,
+ if (!budget ||
+ tg3_tx_frag_set(tnapi, &entry, &budget, mapping,
len, base_flags |
((i == last) ? TXD_FLAG_END : 0),
- tmp_mss, vlan))
+ tmp_mss, vlan)) {
would_hit_hwbug = 1;
+ break;
+ }
}
}
return NETDEV_TX_OK;
dma_error:
- tg3_tx_skb_unmap(tnapi, tnapi->tx_prod, i);
+ tg3_tx_skb_unmap(tnapi, tnapi->tx_prod, --i);
tnapi->tx_buffers[tnapi->tx_prod].skb = NULL;
drop:
dev_kfree_skb(skb);
if (!skb)
continue;
- tg3_tx_skb_unmap(tnapi, i, skb_shinfo(skb)->nr_frags);
+ tg3_tx_skb_unmap(tnapi, i,
+ skb_shinfo(skb)->nr_frags - 1);
dev_kfree_skb_any(skb);
}
{
struct tg3 *tp = (struct tg3 *) __opaque;
- if (tp->irq_sync)
+ if (tp->irq_sync || tg3_flag(tp, RESET_TASK_PENDING))
goto restart_timer;
spin_lock(&tp->lock);
}
if (!(tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) {
- tg3_flag_set(tp, RESTART_TIMER);
spin_unlock(&tp->lock);
- schedule_work(&tp->reset_task);
- return;
+ tg3_reset_task_schedule(tp);
+ goto restart_timer;
}
}
struct tg3_napi *tnapi = &tp->napi[i];
err = tg3_request_irq(tp, i);
if (err) {
- for (i--; i >= 0; i--)
+ for (i--; i >= 0; i--) {
+ tnapi = &tp->napi[i];
free_irq(tnapi->irq_vec, tnapi);
- break;
+ }
+ goto err_out2;
}
}
- if (err)
- goto err_out2;
-
tg3_full_lock(tp, 0);
err = tg3_init_hw(tp, 1);
struct tg3 *tp = netdev_priv(dev);
tg3_napi_disable(tp);
- cancel_work_sync(&tp->reset_task);
+ tg3_reset_task_cancel(tp);
netif_tx_stop_all_queues(dev);
break;
}
- tg3_tx_skb_unmap(tnapi, tnapi->tx_prod - 1, 0);
+ tg3_tx_skb_unmap(tnapi, tnapi->tx_prod - 1, -1);
dev_kfree_skb(skb);
if (tx_idx != tnapi->tx_prod)
val = tr32(MEMARB_MODE);
tw32(MEMARB_MODE, val | MEMARB_MODE_ENABLE);
- if (tg3_flag(tp, PCIX_MODE)) {
- pci_read_config_dword(tp->pdev,
- tp->pcix_cap + PCI_X_STATUS, &val);
- tp->pci_fn = val & 0x7;
- } else {
- tp->pci_fn = PCI_FUNC(tp->pdev->devfn) & 3;
+ tp->pci_fn = PCI_FUNC(tp->pdev->devfn) & 3;
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 ||
+ tg3_flag(tp, 5780_CLASS)) {
+ if (tg3_flag(tp, PCIX_MODE)) {
+ pci_read_config_dword(tp->pdev,
+ tp->pcix_cap + PCI_X_STATUS,
+ &val);
+ tp->pci_fn = val & 0x7;
+ }
+ } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717) {
+ tg3_read_mem(tp, NIC_SRAM_CPMU_STATUS, &val);
+ if ((val & NIC_SRAM_CPMUSTAT_SIG_MSK) ==
+ NIC_SRAM_CPMUSTAT_SIG) {
+ tp->pci_fn = val & TG3_CPMU_STATUS_FMSK_5717;
+ tp->pci_fn = tp->pci_fn ? 1 : 0;
+ }
+ } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720) {
+ tg3_read_mem(tp, NIC_SRAM_CPMU_STATUS, &val);
+ if ((val & NIC_SRAM_CPMUSTAT_SIG_MSK) ==
+ NIC_SRAM_CPMUSTAT_SIG) {
+ tp->pci_fn = (val & TG3_CPMU_STATUS_FMSK_5719) >>
+ TG3_CPMU_STATUS_FSHFT_5719;
+ }
}
/* Get eeprom hw config before calling tg3_set_power_state().
if (tp->fw)
release_firmware(tp->fw);
- cancel_work_sync(&tp->reset_task);
+ tg3_reset_task_cancel(tp);
if (tg3_flag(tp, USE_PHYLIB)) {
tg3_phy_fini(tp);
if (!netif_running(dev))
return 0;
- flush_work_sync(&tp->reset_task);
+ tg3_reset_task_cancel(tp);
tg3_phy_stop(tp);
tg3_netif_stop(tp);
tg3_netif_stop(tp);
del_timer_sync(&tp->timer);
- tg3_flag_clear(tp, RESTART_TIMER);
/* Want to make sure that the reset task doesn't run */
- cancel_work_sync(&tp->reset_task);
+ tg3_reset_task_cancel(tp);
tg3_flag_clear(tp, TX_RECOVERY_PENDING);
- tg3_flag_clear(tp, RESTART_TIMER);
netif_device_detach(netdev);
#define TG3_CPMU_CLCK_ORIDE 0x00003624
#define CPMU_CLCK_ORIDE_MAC_ORIDE_EN 0x80000000
+#define TG3_CPMU_STATUS 0x0000362c
+#define TG3_CPMU_STATUS_FMSK_5717 0x20000000
+#define TG3_CPMU_STATUS_FMSK_5719 0xc0000000
+#define TG3_CPMU_STATUS_FSHFT_5719 30
+
#define TG3_CPMU_CLCK_STAT 0x00003630
#define CPMU_CLCK_STAT_MAC_CLCK_MASK 0x001f0000
#define CPMU_CLCK_STAT_MAC_CLCK_62_5 0x00000000
#define NIC_SRAM_RGMII_EXT_IBND_RX_EN 0x00000008
#define NIC_SRAM_RGMII_EXT_IBND_TX_EN 0x00000010
+#define NIC_SRAM_CPMU_STATUS 0x00000e00
+#define NIC_SRAM_CPMUSTAT_SIG 0x0000362c
+#define NIC_SRAM_CPMUSTAT_SIG_MSK 0x0000ffff
+
#define NIC_SRAM_RX_MINI_BUFFER_DESC 0x00001000
#define NIC_SRAM_DMA_DESC_POOL_BASE 0x00002000
#define APE_PER_LOCK_GRANT_DRIVER 0x00001000
/* APE convenience enumerations. */
-#define TG3_APE_LOCK_GRC 1
-#define TG3_APE_LOCK_MEM 4
-#define TG3_APE_LOCK_GPIO 7
+#define TG3_APE_LOCK_PHY0 0
+#define TG3_APE_LOCK_GRC 1
+#define TG3_APE_LOCK_PHY1 2
+#define TG3_APE_LOCK_PHY2 3
+#define TG3_APE_LOCK_MEM 4
+#define TG3_APE_LOCK_PHY3 5
+#define TG3_APE_LOCK_GPIO 7
#define TG3_EEPROM_SB_F1R2_MBA_OFF 0x10
TG3_FLAG_JUMBO_CAPABLE,
TG3_FLAG_CHIP_RESETTING,
TG3_FLAG_INIT_COMPLETE,
- TG3_FLAG_RESTART_TIMER,
TG3_FLAG_TSO_BUG,
TG3_FLAG_IS_5788,
TG3_FLAG_MAX_RXPEND_64,
TG3_FLAG_APE_HAS_NCSI,
TG3_FLAG_5717_PLUS,
TG3_FLAG_4K_FIFO_LIMIT,
+ TG3_FLAG_RESET_TASK_PENDING,
/* Add new flags before this comment and TG3_FLAG_NUMBER_OF_FLAGS */
TG3_FLAG_NUMBER_OF_FLAGS, /* Last entry in enum TG3_FLAGS */
#include <linux/if_ether.h>
#include <linux/ip.h>
#include <linux/prefetch.h>
+#include <linux/module.h>
#include "bnad.h"
#include "bna.h"
config NET_ATMEL
bool "Atmel devices"
+ default y
depends on HAVE_NET_MACB || (ARM && ARCH_AT91RM9200)
---help---
If you have a network (Ethernet) card belonging to this class, say Y.
#include <net/netevent.h>
#include <linux/highmem.h>
#include <linux/vmalloc.h>
+#include <linux/export.h>
#include "common.h"
#include "regs.h"
#include <linux/if_vlan.h>
#include <linux/jhash.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <net/neighbour.h>
#include "common.h"
#include "t3cdev.h"
#include <linux/if.h>
#include <linux/if_vlan.h>
#include <linux/jhash.h>
+#include <linux/module.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
#include <net/neighbour.h>
#include "cxgb4.h"
#include "l2t.h"
return d;
}
-#include <linux/module.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-
static inline void *l2t_get_idx(struct seq_file *seq, loff_t pos)
{
struct l2t_entry *l2tab = seq->private;
#include <linux/dma-mapping.h>
#include <linux/jiffies.h>
#include <linux/prefetch.h>
+#include <linux/export.h>
#include <net/ipv6.h>
#include <net/tcp.h>
#include "cxgb4.h"
*/
#include <linux/prefetch.h>
+#include <linux/module.h>
#include "be.h"
#include "be_cmds.h"
#include <asm/div64.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/of.h>
+#include <linux/module.h>
#include <net/ethoc.h>
static int buffer_size = 0x8000; /* 32 KBytes */
default y
depends on FSL_SOC || QUICC_ENGINE || CPM1 || CPM2 || PPC_MPC512x || \
M523x || M527x || M5272 || M528x || M520x || M532x || \
- ARCH_MXC || ARCH_MXS || \
- (PPC_MPC52xx && PPC_BESTCOMM)
+ ARCH_MXC || ARCH_MXS || (PPC_MPC52xx && PPC_BESTCOMM)
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/stddef.h>
+#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
config NET_VENDOR_INTEL
bool "Intel devices"
default y
- depends on PCI || PCI_MSI
+ depends on PCI || PCI_MSI || ISA || ISA_DMA_API || ARM || \
+ ARCH_ACORN || MCA || MCA_LEGACY || SNI_RM || SUN3 || \
+ GSC || BVME6000 || MVME16x || ARCH_ENP2611 || \
+ (ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR) || \
+ EXPERIMENTAL
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
*******************************************************************************/
#include <linux/netdevice.h>
+#include <linux/module.h>
#include <linux/pci.h>
#include "e1000.h"
int ixgbe_check_vf_assignment(struct ixgbe_adapter *adapter)
{
+#ifdef CONFIG_PCI_IOV
int i;
for (i = 0; i < adapter->num_vfs; i++) {
if (adapter->vfinfo[i].vfdev->dev_flags &
PCI_DEV_FLAGS_ASSIGNED)
return true;
}
+#endif
return false;
}
int ixgbe_ndo_get_vf_config(struct net_device *netdev,
int vf, struct ifla_vf_info *ivi);
void ixgbe_check_vf_rate_limit(struct ixgbe_adapter *adapter);
-#ifdef CONFIG_PCI_IOV
void ixgbe_disable_sriov(struct ixgbe_adapter *adapter);
+int ixgbe_check_vf_assignment(struct ixgbe_adapter *adapter);
+#ifdef CONFIG_PCI_IOV
void ixgbe_enable_sriov(struct ixgbe_adapter *adapter,
const struct ixgbe_info *ii);
-int ixgbe_check_vf_assignment(struct ixgbe_adapter *adapter);
#endif
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
#include <asm/checksum.h>
#include "sky2.h"
#define DRV_NAME "sky2"
-#define DRV_VERSION "1.29"
+#define DRV_VERSION "1.30"
/*
* The Yukon II chipset takes 64 bit command blocks (called list elements)
#define MAX_SKB_TX_LE (2 + (sizeof(dma_addr_t)/sizeof(u32))*(MAX_SKB_FRAGS+1))
#define TX_MIN_PENDING (MAX_SKB_TX_LE+1)
#define TX_MAX_PENDING 1024
-#define TX_DEF_PENDING 127
+#define TX_DEF_PENDING 63
#define TX_WATCHDOG (5 * HZ)
#define NAPI_WEIGHT 64
gm_phy_write(hw, port, PHY_MARV_FE_SPEC_2, spec);
}
} else {
- if (hw->chip_id >= CHIP_ID_YUKON_OPT) {
- u16 ctrl2 = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL_2);
-
- /* enable PHY Reverse Auto-Negotiation */
- ctrl2 |= 1u << 13;
-
- /* Write PHY changes (SW-reset must follow) */
- gm_phy_write(hw, port, PHY_MARV_EXT_CTRL_2, ctrl2);
- }
-
-
/* disable energy detect */
ctrl &= ~PHY_M_PC_EN_DET_MSK;
/* block receiver */
sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
+ sky2_read32(hw, B0_CTST);
}
static void sky2_set_tx_stfwd(struct sky2_hw *hw, unsigned port)
? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
}
+/*
+ * Fixed initial key as seed to RSS.
+ */
+static const uint32_t rss_init_key[10] = {
+ 0x7c3351da, 0x51c5cf4e, 0x44adbdd1, 0xe8d38d18, 0x48897c43,
+ 0xb1d60e7e, 0x6a3dd760, 0x01a2e453, 0x16f46f13, 0x1a0e7b30
+};
+
/* Enable/disable receive hash calculation (RSS) */
static void rx_set_rss(struct net_device *dev, u32 features)
{
/* Program RSS initial values */
if (features & NETIF_F_RXHASH) {
- u32 key[nkeys];
-
- get_random_bytes(key, nkeys * sizeof(u32));
for (i = 0; i < nkeys; i++)
sky2_write32(hw, SK_REG(sky2->port, RSS_KEY + i * 4),
- key[i]);
+ rss_init_key[i]);
/* Need to turn on (undocumented) flag to make hashing work */
sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T),
if (err)
dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq);
else {
+ hw->flags |= SKY2_HW_IRQ_SETUP;
+
napi_enable(&hw->napi);
sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
sky2_read32(hw, B0_IMSK);
/* Bring up network interface. */
-static int sky2_up(struct net_device *dev)
+static int sky2_open(struct net_device *dev)
{
struct sky2_port *sky2 = netdev_priv(dev);
struct sky2_hw *hw = sky2->hw;
sky2_hw_up(sky2);
+ if (hw->chip_id == CHIP_ID_YUKON_OPT ||
+ hw->chip_id == CHIP_ID_YUKON_PRM ||
+ hw->chip_id == CHIP_ID_YUKON_OP_2)
+ imask |= Y2_IS_PHY_QLNK; /* enable PHY Quick Link */
+
/* Enable interrupts from phy/mac for port */
imask = sky2_read32(hw, B0_IMSK);
imask |= portirq_msk[port];
sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET);
sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
+
+ sky2_read32(hw, B0_CTST);
}
static void sky2_hw_down(struct sky2_port *sky2)
}
/* Network shutdown */
-static int sky2_down(struct net_device *dev)
+static int sky2_close(struct net_device *dev)
{
struct sky2_port *sky2 = netdev_priv(dev);
struct sky2_hw *hw = sky2->hw;
netif_info(sky2, ifdown, dev, "disabling interface\n");
- /* Disable port IRQ */
- sky2_write32(hw, B0_IMSK,
- sky2_read32(hw, B0_IMSK) & ~portirq_msk[sky2->port]);
- sky2_read32(hw, B0_IMSK);
-
if (hw->ports == 1) {
+ sky2_write32(hw, B0_IMSK, 0);
+ sky2_read32(hw, B0_IMSK);
+
napi_disable(&hw->napi);
free_irq(hw->pdev->irq, hw);
+ hw->flags &= ~SKY2_HW_IRQ_SETUP;
} else {
+ u32 imask;
+
+ /* Disable port IRQ */
+ imask = sky2_read32(hw, B0_IMSK);
+ imask &= ~portirq_msk[sky2->port];
+ sky2_write32(hw, B0_IMSK, imask);
+ sky2_read32(hw, B0_IMSK);
+
synchronize_irq(hw->pdev->irq);
napi_synchronize(&hw->napi);
}
if (netif_running(dev)) {
sky2_tx_complete(sky2, last);
- /* Wake unless it's detached, and called e.g. from sky2_down() */
+ /* Wake unless it's detached, and called e.g. from sky2_close() */
if (tx_avail(sky2) > MAX_SKB_TX_LE + 4)
netif_wake_queue(dev);
}
hw->chip_id == CHIP_ID_YUKON_PRM ||
hw->chip_id == CHIP_ID_YUKON_OP_2) {
u16 reg;
- u32 msk;
if (hw->chip_id == CHIP_ID_YUKON_OPT && hw->chip_rev == 0) {
/* disable PCI-E PHY power down (set PHY reg 0x80, bit 7 */
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
sky2_pci_write16(hw, PSM_CONFIG_REG4, reg);
- /* enable PHY Quick Link */
- msk = sky2_read32(hw, B0_IMSK);
- msk |= Y2_IS_PHY_QLNK;
- sky2_write32(hw, B0_IMSK, msk);
-
/* check if PSMv2 was running before */
reg = sky2_pci_read16(hw, PSM_CONFIG_REG3);
if (reg & PCI_EXP_LNKCTL_ASPMC)
netif_tx_lock(dev);
netif_device_detach(dev); /* stop txq */
netif_tx_unlock(dev);
- sky2_down(dev);
+ sky2_close(dev);
}
}
int err = 0;
if (netif_running(dev)) {
- err = sky2_up(dev);
+ err = sky2_open(dev);
if (err) {
netdev_info(dev, "could not restart %d\n", err);
dev_close(dev);
{
int i;
- sky2_read32(hw, B0_IMSK);
- sky2_write32(hw, B0_IMSK, 0);
- synchronize_irq(hw->pdev->irq);
- napi_disable(&hw->napi);
+ if (hw->flags & SKY2_HW_IRQ_SETUP) {
+ sky2_read32(hw, B0_IMSK);
+ sky2_write32(hw, B0_IMSK, 0);
+
+ synchronize_irq(hw->pdev->irq);
+ napi_disable(&hw->napi);
+ }
for (i = 0; i < hw->ports; i++) {
struct net_device *dev = hw->dev[i];
netif_wake_queue(dev);
}
- sky2_write32(hw, B0_IMSK, imask);
- sky2_read32(hw, B0_IMSK);
-
- sky2_read32(hw, B0_Y2_SP_LISR);
- napi_enable(&hw->napi);
+ if (hw->flags & SKY2_HW_IRQ_SETUP) {
+ sky2_write32(hw, B0_IMSK, imask);
+ sky2_read32(hw, B0_IMSK);
+ sky2_read32(hw, B0_Y2_SP_LISR);
+ napi_enable(&hw->napi);
+ }
}
static void sky2_restart(struct work_struct *work)
return 0;
}
+/*
+ * Hardware is limited to min of 128 and max of 2048 for ring size
+ * and rounded up to next power of two
+ * to avoid division in modulus calclation
+ */
+static unsigned long roundup_ring_size(unsigned long pending)
+{
+ return max(128ul, roundup_pow_of_two(pending+1));
+}
+
static void sky2_get_ringparam(struct net_device *dev,
struct ethtool_ringparam *ering)
{
sky2->rx_pending = ering->rx_pending;
sky2->tx_pending = ering->tx_pending;
- sky2->tx_ring_size = roundup_pow_of_two(sky2->tx_pending+1);
+ sky2->tx_ring_size = roundup_ring_size(sky2->tx_pending);
return sky2_reattach(dev);
}
struct net_device *dev = ptr;
struct sky2_port *sky2 = netdev_priv(dev);
- if (dev->netdev_ops->ndo_open != sky2_up || !sky2_debug)
+ if (dev->netdev_ops->ndo_open != sky2_open || !sky2_debug)
return NOTIFY_DONE;
switch (event) {
not allowing netpoll on second port */
static const struct net_device_ops sky2_netdev_ops[2] = {
{
- .ndo_open = sky2_up,
- .ndo_stop = sky2_down,
+ .ndo_open = sky2_open,
+ .ndo_stop = sky2_close,
.ndo_start_xmit = sky2_xmit_frame,
.ndo_do_ioctl = sky2_ioctl,
.ndo_validate_addr = eth_validate_addr,
#endif
},
{
- .ndo_open = sky2_up,
- .ndo_stop = sky2_down,
+ .ndo_open = sky2_open,
+ .ndo_stop = sky2_close,
.ndo_start_xmit = sky2_xmit_frame,
.ndo_do_ioctl = sky2_ioctl,
.ndo_validate_addr = eth_validate_addr,
spin_lock_init(&sky2->phy_lock);
sky2->tx_pending = TX_DEF_PENDING;
- sky2->tx_ring_size = roundup_pow_of_two(TX_DEF_PENDING+1);
+ sky2->tx_ring_size = roundup_ring_size(TX_DEF_PENDING);
sky2->rx_pending = RX_DEF_PENDING;
hw->dev[port] = dev;
#define SKY2_HW_RSS_BROKEN 0x00000100
#define SKY2_HW_VLAN_BROKEN 0x00000200
#define SKY2_HW_RSS_CHKSUM 0x00000400 /* RSS requires chksum */
+#define SKY2_HW_IRQ_SETUP 0x00000800
u8 chip_id;
u8 chip_rev;
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/mm.h>
+#include <linux/export.h>
#include <linux/bitmap.h>
#include <linux/dma-mapping.h>
#include <linux/vmalloc.h>
*/
#include <linux/workqueue.h>
+#include <linux/module.h>
#include "mlx4.h"
#include <linux/sched.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <linux/pci.h>
#include <linux/errno.h>
*/
#include <linux/hardirq.h>
+#include <linux/export.h>
#include <linux/gfp.h>
#include <linux/mlx4/cmd.h>
* Packet is OK - process it.
*/
length = be32_to_cpu(cqe->byte_cnt);
+ length -= ring->fcs_del;
ring->bytes += length;
ring->packets++;
context->db_rec_addr = cpu_to_be64(ring->wqres.db.dma);
/* Cancel FCS removal if FW allows */
- if (mdev->dev->caps.flags & MLX4_DEV_CAP_FLAG_FCS_KEEP)
+ if (mdev->dev->caps.flags & MLX4_DEV_CAP_FLAG_FCS_KEEP) {
context->param3 |= cpu_to_be32(1 << 29);
+ ring->fcs_del = ETH_FCS_LEN;
+ } else
+ ring->fcs_del = 0;
err = mlx4_qp_to_ready(mdev->dev, &ring->wqres.mtt, context, qp, state);
if (err) {
#include <linux/if_vlan.h>
#include <linux/vmalloc.h>
#include <linux/tcp.h>
+#include <linux/moduleparam.h>
#include "mlx4_en.h"
#include <linux/interrupt.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <linux/mm.h>
#include <linux/dma-mapping.h>
*/
#include <linux/mlx4/cmd.h>
+#include <linux/module.h>
#include <linux/cache.h>
#include "fw.h"
*/
#include <linux/slab.h>
+#include <linux/export.h>
#include "mlx4.h"
#include <linux/etherdevice.h>
#include <linux/mlx4/cmd.h>
+#include <linux/export.h>
#include "mlx4.h"
u32 prod;
u32 cons;
u32 buf_size;
+ u8 fcs_del;
void *buf;
void *rx_info;
unsigned long bytes;
*/
#include <linux/errno.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <linux/mlx4/cmd.h>
*/
#include <linux/errno.h>
+#include <linux/export.h>
#include <linux/io-mapping.h>
#include <asm/page.h>
#include <linux/errno.h>
#include <linux/if_ether.h>
+#include <linux/export.h>
#include <linux/mlx4/cmd.h>
*/
#include <linux/gfp.h>
+#include <linux/export.h>
#include <linux/mlx4/cmd.h>
#include <linux/mlx4/qp.h>
*/
#include <linux/mlx4/cmd.h>
+#include <linux/export.h>
#include <linux/gfp.h>
#include "mlx4.h"
config NET_VENDOR_NATSEMI
bool "National Semi-conductor devices"
default y
- depends on MCA || MAC || MACH_JAZZ || PCI || XTENSA_PLATFORM_XT2000
+ depends on AMIGA_PCMCIA || ARM || EISA || EXPERIMENTAL || H8300 || \
+ ISA || M32R || MAC || MACH_JAZZ || MACH_TX49XX || MCA || \
+ MCA_LEGACY || MIPS || PCI || PCMCIA || SUPERH || \
+ XTENSA_PLATFORM_XT2000 || ZORRO
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
#include <linux/firmware.h>
#include <linux/net_tstamp.h>
#include <linux/prefetch.h>
+#include <linux/module.h>
#include "vxge-main.h"
#include "vxge-reg.h"
};
static const struct nv_ethtool_str nv_estats_str[] = {
- { "tx_bytes" },
+ { "tx_bytes" }, /* includes Ethernet FCS CRC */
{ "tx_zero_rexmt" },
{ "tx_one_rexmt" },
{ "tx_many_rexmt" },
/* version 2 stats */
{ "tx_deferral" },
{ "tx_packets" },
- { "rx_bytes" },
+ { "rx_bytes" }, /* includes Ethernet FCS CRC */
{ "tx_pause" },
{ "rx_pause" },
{ "rx_drop_frame" },
};
struct nv_ethtool_stats {
- u64 tx_bytes;
+ u64 tx_bytes; /* should be ifconfig->tx_bytes + 4*tx_packets */
u64 tx_zero_rexmt;
u64 tx_one_rexmt;
u64 tx_many_rexmt;
u64 rx_unicast;
u64 rx_multicast;
u64 rx_broadcast;
- u64 rx_packets;
+ u64 rx_packets; /* should be ifconfig->rx_packets */
u64 rx_errors_total;
u64 tx_errors_total;
/* version 2 stats */
u64 tx_deferral;
- u64 tx_packets;
- u64 rx_bytes;
+ u64 tx_packets; /* should be ifconfig->tx_packets */
+ u64 rx_bytes; /* should be ifconfig->rx_bytes + 4*rx_packets */
u64 tx_pause;
u64 rx_pause;
u64 rx_drop_frame;
np->estats.tx_pause += readl(base + NvRegTxPause);
np->estats.rx_pause += readl(base + NvRegRxPause);
np->estats.rx_drop_frame += readl(base + NvRegRxDropFrame);
+ np->estats.rx_errors_total += np->estats.rx_drop_frame;
}
if (np->driver_data & DEV_HAS_STATISTICS_V3) {
if (np->driver_data & (DEV_HAS_STATISTICS_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_STATISTICS_V3)) {
nv_get_hw_stats(dev);
+ /*
+ * Note: because HW stats are not always available and
+ * for consistency reasons, the following ifconfig
+ * stats are managed by software: rx_bytes, tx_bytes,
+ * rx_packets and tx_packets. The related hardware
+ * stats reported by ethtool should be equivalent to
+ * these ifconfig stats, with 4 additional bytes per
+ * packet (Ethernet FCS CRC).
+ */
+
/* copy to net_device stats */
- dev->stats.tx_bytes = np->estats.tx_bytes;
dev->stats.tx_fifo_errors = np->estats.tx_fifo_errors;
dev->stats.tx_carrier_errors = np->estats.tx_carrier_errors;
dev->stats.rx_crc_errors = np->estats.rx_crc_errors;
dev->stats.rx_over_errors = np->estats.rx_over_errors;
+ dev->stats.rx_fifo_errors = np->estats.rx_drop_frame;
dev->stats.rx_errors = np->estats.rx_errors_total;
dev->stats.tx_errors = np->estats.tx_errors_total;
}
/* add fragments to entries count */
for (i = 0; i < fragments; i++) {
- u32 size = skb_frag_size(&skb_shinfo(skb)->frags[i]);
+ u32 frag_size = skb_frag_size(&skb_shinfo(skb)->frags[i]);
- entries += (size >> NV_TX2_TSO_MAX_SHIFT) +
- ((size & (NV_TX2_TSO_MAX_SIZE-1)) ? 1 : 0);
+ entries += (frag_size >> NV_TX2_TSO_MAX_SHIFT) +
+ ((frag_size & (NV_TX2_TSO_MAX_SIZE-1)) ? 1 : 0);
}
spin_lock_irqsave(&np->lock, flags);
/* setup the fragments */
for (i = 0; i < fragments; i++) {
const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
- u32 size = skb_frag_size(frag);
+ u32 frag_size = skb_frag_size(frag);
offset = 0;
do {
prev_tx = put_tx;
prev_tx_ctx = np->put_tx_ctx;
- bcnt = (size > NV_TX2_TSO_MAX_SIZE) ? NV_TX2_TSO_MAX_SIZE : size;
+ bcnt = (frag_size > NV_TX2_TSO_MAX_SIZE) ? NV_TX2_TSO_MAX_SIZE : frag_size;
np->put_tx_ctx->dma = skb_frag_dma_map(
&np->pci_dev->dev,
frag, offset,
put_tx->flaglen = cpu_to_le32((bcnt-1) | tx_flags);
offset += bcnt;
- size -= bcnt;
+ frag_size -= bcnt;
if (unlikely(put_tx++ == np->last_tx.orig))
put_tx = np->first_tx.orig;
if (unlikely(np->put_tx_ctx++ == np->last_tx_ctx))
np->put_tx_ctx = np->first_tx_ctx;
- } while (size);
+ } while (frag_size);
}
/* set last fragment flag */
/* add fragments to entries count */
for (i = 0; i < fragments; i++) {
- u32 size = skb_frag_size(&skb_shinfo(skb)->frags[i]);
+ u32 frag_size = skb_frag_size(&skb_shinfo(skb)->frags[i]);
- entries += (size >> NV_TX2_TSO_MAX_SHIFT) +
- ((size & (NV_TX2_TSO_MAX_SIZE-1)) ? 1 : 0);
+ entries += (frag_size >> NV_TX2_TSO_MAX_SHIFT) +
+ ((frag_size & (NV_TX2_TSO_MAX_SIZE-1)) ? 1 : 0);
}
spin_lock_irqsave(&np->lock, flags);
/* setup the fragments */
for (i = 0; i < fragments; i++) {
skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
- u32 size = skb_frag_size(frag);
+ u32 frag_size = skb_frag_size(frag);
offset = 0;
do {
prev_tx = put_tx;
prev_tx_ctx = np->put_tx_ctx;
- bcnt = (size > NV_TX2_TSO_MAX_SIZE) ? NV_TX2_TSO_MAX_SIZE : size;
+ bcnt = (frag_size > NV_TX2_TSO_MAX_SIZE) ? NV_TX2_TSO_MAX_SIZE : frag_size;
np->put_tx_ctx->dma = skb_frag_dma_map(
&np->pci_dev->dev,
frag, offset,
put_tx->flaglen = cpu_to_le32((bcnt-1) | tx_flags);
offset += bcnt;
- size -= bcnt;
+ frag_size -= bcnt;
if (unlikely(put_tx++ == np->last_tx.ex))
put_tx = np->first_tx.ex;
if (unlikely(np->put_tx_ctx++ == np->last_tx_ctx))
np->put_tx_ctx = np->first_tx_ctx;
- } while (size);
+ } while (frag_size);
}
/* set last fragment flag */
if (np->desc_ver == DESC_VER_1) {
if (flags & NV_TX_LASTPACKET) {
if (flags & NV_TX_ERROR) {
- if (flags & NV_TX_UNDERFLOW)
- dev->stats.tx_fifo_errors++;
- if (flags & NV_TX_CARRIERLOST)
- dev->stats.tx_carrier_errors++;
if ((flags & NV_TX_RETRYERROR) && !(flags & NV_TX_RETRYCOUNT_MASK))
nv_legacybackoff_reseed(dev);
- dev->stats.tx_errors++;
} else {
dev->stats.tx_packets++;
dev->stats.tx_bytes += np->get_tx_ctx->skb->len;
} else {
if (flags & NV_TX2_LASTPACKET) {
if (flags & NV_TX2_ERROR) {
- if (flags & NV_TX2_UNDERFLOW)
- dev->stats.tx_fifo_errors++;
- if (flags & NV_TX2_CARRIERLOST)
- dev->stats.tx_carrier_errors++;
if ((flags & NV_TX2_RETRYERROR) && !(flags & NV_TX2_RETRYCOUNT_MASK))
nv_legacybackoff_reseed(dev);
- dev->stats.tx_errors++;
} else {
dev->stats.tx_packets++;
dev->stats.tx_bytes += np->get_tx_ctx->skb->len;
nv_unmap_txskb(np, np->get_tx_ctx);
if (flags & NV_TX2_LASTPACKET) {
- if (!(flags & NV_TX2_ERROR))
- dev->stats.tx_packets++;
- else {
+ if (flags & NV_TX2_ERROR) {
if ((flags & NV_TX2_RETRYERROR) && !(flags & NV_TX2_RETRYCOUNT_MASK)) {
if (np->driver_data & DEV_HAS_GEAR_MODE)
nv_gear_backoff_reseed(dev);
else
nv_legacybackoff_reseed(dev);
}
+ } else {
+ dev->stats.tx_packets++;
+ dev->stats.tx_bytes += np->get_tx_ctx->skb->len;
}
dev_kfree_skb_any(np->get_tx_ctx->skb);
if ((flags & NV_RX_ERROR_MASK) == NV_RX_ERROR4) {
len = nv_getlen(dev, skb->data, len);
if (len < 0) {
- dev->stats.rx_errors++;
dev_kfree_skb(skb);
goto next_pkt;
}
else {
if (flags & NV_RX_MISSEDFRAME)
dev->stats.rx_missed_errors++;
- if (flags & NV_RX_CRCERR)
- dev->stats.rx_crc_errors++;
- if (flags & NV_RX_OVERFLOW)
- dev->stats.rx_over_errors++;
- dev->stats.rx_errors++;
dev_kfree_skb(skb);
goto next_pkt;
}
if ((flags & NV_RX2_ERROR_MASK) == NV_RX2_ERROR4) {
len = nv_getlen(dev, skb->data, len);
if (len < 0) {
- dev->stats.rx_errors++;
dev_kfree_skb(skb);
goto next_pkt;
}
}
/* the rest are hard errors */
else {
- if (flags & NV_RX2_CRCERR)
- dev->stats.rx_crc_errors++;
- if (flags & NV_RX2_OVERFLOW)
- dev->stats.rx_over_errors++;
- dev->stats.rx_errors++;
dev_kfree_skb(skb);
goto next_pkt;
}
__vlan_hwaccel_put_tag(skb, vid);
}
napi_gro_receive(&np->napi, skb);
-
dev->stats.rx_packets++;
dev->stats.rx_bytes += len;
} else {
struct netdev_hw_addr *ha;
netdev_for_each_mc_addr(ha, dev) {
- unsigned char *addr = ha->addr;
+ unsigned char *hw_addr = ha->addr;
u32 a, b;
- a = le32_to_cpu(*(__le32 *) addr);
- b = le16_to_cpu(*(__le16 *) (&addr[4]));
+ a = le32_to_cpu(*(__le32 *) hw_addr);
+ b = le16_to_cpu(*(__le16 *) (&hw_addr[4]));
alwaysOn[0] &= a;
alwaysOff[0] &= ~a;
alwaysOn[1] &= b;
for (i = 0;; i++) {
events = readl(base + NvRegMSIXIrqStatus) & NVREG_IRQ_TX_ALL;
- writel(NVREG_IRQ_TX_ALL, base + NvRegMSIXIrqStatus);
+ writel(events, base + NvRegMSIXIrqStatus);
+ netdev_dbg(dev, "tx irq events: %08x\n", events);
if (!(events & np->irqmask))
break;
for (i = 0;; i++) {
events = readl(base + NvRegMSIXIrqStatus) & NVREG_IRQ_RX_ALL;
- writel(NVREG_IRQ_RX_ALL, base + NvRegMSIXIrqStatus);
+ writel(events, base + NvRegMSIXIrqStatus);
+ netdev_dbg(dev, "rx irq events: %08x\n", events);
if (!(events & np->irqmask))
break;
for (i = 0;; i++) {
events = readl(base + NvRegMSIXIrqStatus) & NVREG_IRQ_OTHER;
- writel(NVREG_IRQ_OTHER, base + NvRegMSIXIrqStatus);
+ writel(events, base + NvRegMSIXIrqStatus);
+ netdev_dbg(dev, "irq events: %08x\n", events);
if (!(events & np->irqmask))
break;
if (!(np->msi_flags & NV_MSI_X_ENABLED)) {
events = readl(base + NvRegIrqStatus) & NVREG_IRQSTAT_MASK;
- writel(NVREG_IRQ_TIMER, base + NvRegIrqStatus);
+ writel(events & NVREG_IRQ_TIMER, base + NvRegIrqStatus);
} else {
events = readl(base + NvRegMSIXIrqStatus) & NVREG_IRQSTAT_MASK;
- writel(NVREG_IRQ_TIMER, base + NvRegMSIXIrqStatus);
+ writel(events & NVREG_IRQ_TIMER, base + NvRegMSIXIrqStatus);
}
pci_push(base);
if (!(events & NVREG_IRQ_TIMER))
struct fe_priv *np = netdev_priv(dev);
/* update stats */
- nv_do_stats_poll((unsigned long)dev);
+ nv_get_hw_stats(dev);
memcpy(buffer, &np->estats, nv_get_sset_count(dev, ETH_SS_STATS)*sizeof(u64));
}
#include <linux/capability.h>
#include <linux/dma-mapping.h>
#include <linux/init.h>
+#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/netdevice.h>
#include "pch_gbe.h"
#include "pch_gbe_api.h"
+#include <linux/module.h>
#define DRV_VERSION "1.00"
const char pch_driver_version[] = DRV_VERSION;
*/
#include "pch_gbe.h"
+#include <linux/module.h> /* for __MODULE_STRING */
#define OPTION_UNSET -1
#define OPTION_DISABLED 0
iowrite16(lp->mcr0, ioaddr + MCR0);
/* Fill the MAC hash tables with their values */
- if (lp->mcr0 && MCR0_HASH_EN) {
+ if (lp->mcr0 & MCR0_HASH_EN) {
iowrite16(hash_table[0], ioaddr + MAR0);
iowrite16(hash_table[1], ioaddr + MAR1);
iowrite16(hash_table[2], ioaddr + MAR2);
netif_carrier_off(dev);
netif_info(tp, ifdown, dev, "link down\n");
if (pm)
- pm_schedule_suspend(&tp->pci_dev->dev, 100);
+ pm_schedule_suspend(&tp->pci_dev->dev, 5000);
}
spin_unlock_irqrestore(&tp->lock, flags);
}
#include <linux/tcp.h>
#include <linux/udp.h>
#include <linux/prefetch.h>
+#include <linux/moduleparam.h>
#include <net/ip.h>
#include <net/checksum.h>
#include "net_driver.h"
{
struct smsc911x_data *pdata = netdev_priv(dev);
unsigned int byte_test;
+ unsigned int to = 100;
SMSC_TRACE(pdata, probe, "Driver Parameters:");
SMSC_TRACE(pdata, probe, "LAN base: 0x%08lX",
return -ENODEV;
}
+ /*
+ * poll the READY bit in PMT_CTRL. Any other access to the device is
+ * forbidden while this bit isn't set. Try for 100ms
+ */
+ while (!(smsc911x_reg_read(pdata, PMT_CTRL) & PMT_CTRL_READY_) && --to)
+ udelay(1000);
+ if (to == 0) {
+ pr_err("Device not READY in 100ms aborting\n");
+ return -ENODEV;
+ }
+
/* Check byte ordering */
byte_test = smsc911x_reg_read(pdata, BYTE_TEST);
SMSC_TRACE(pdata, probe, "BYTE_TEST: 0x%08X", byte_test);
#include <linux/dma-mapping.h>
#include <linux/crc32.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <asm/unaligned.h>
#include "smsc9420.h"
By default, the DMA arbitration scheme is based on Round-robin
(rx:tx priority is 1:1).
-config STMMAC_DUAL_MAC
- bool "STMMAC: dual mac support (EXPERIMENTAL)"
- default n
- depends on EXPERIMENTAL && STMMAC_ETH && !STMMAC_TIMER
- ---help---
- Some ST SoCs (for example the stx7141 and stx7200c2) have two
- Ethernet Controllers. This option turns on the second Ethernet
- device on this kind of platforms.
-
config STMMAC_TIMER
bool "STMMAC Timer optimisation"
default n
/* DMA SW reset */
value |= DMA_BUS_MODE_SFT_RESET;
writel(value, ioaddr + DMA_BUS_MODE);
- limit = 15000;
+ limit = 10;
while (limit--) {
if (!(readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET))
break;
+ mdelay(10);
}
if (limit < 0)
return -EBUSY;
/* DMA SW reset */
value |= DMA_BUS_MODE_SFT_RESET;
writel(value, ioaddr + DMA_BUS_MODE);
- limit = 15000;
+ limit = 10;
while (limit--) {
if (!(readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET))
break;
+ mdelay(10);
}
if (limit < 0)
return -EBUSY;
spinlock_t lock;
spinlock_t tx_lock;
int wolopts;
- int wolenabled;
int wol_irq;
#ifdef CONFIG_STMMAC_TIMER
struct stmmac_timer *tm;
struct plat_stmmacenet_data *plat;
struct stmmac_counters mmc;
struct dma_features dma_cap;
+ int hw_cap_support;
};
extern int stmmac_mdio_unregister(struct net_device *ndev);
struct stmmac_priv *priv = netdev_priv(dev);
u32 support = WAKE_MAGIC | WAKE_UCAST;
+ /* By default almost all GMAC devices support the WoL via
+ * magic frame but we can disable it if the HW capability
+ * register shows no support for pmt_magic_frame. */
+ if ((priv->hw_cap_support) && (!priv->dma_cap.pmt_magic_frame))
+ wol->wolopts &= ~WAKE_MAGIC;
+
if (!device_can_wakeup(priv->device))
return -EINVAL;
}
/* Stop Advertising 1000BASE Capability if interface is not GMII */
- if ((interface) && ((interface == PHY_INTERFACE_MODE_MII) ||
- (interface == PHY_INTERFACE_MODE_RMII))) {
- phydev->supported &= (PHY_BASIC_FEATURES | SUPPORTED_Pause |
- SUPPORTED_Asym_Pause);
- phydev->advertising = phydev->supported;
- }
+ if ((interface == PHY_INTERFACE_MODE_MII) ||
+ (interface == PHY_INTERFACE_MODE_RMII))
+ phydev->advertising &= ~(SUPPORTED_1000baseT_Half |
+ SUPPORTED_1000baseT_Full);
/*
* Broken HW is sometimes missing the pull-up resistor on the
return 0;
}
-/* New GMAC chips support a new register to indicate the
- * presence of the optional feature/functions.
+/**
+ * stmmac_selec_desc_mode
+ * @dev : device pointer
+ * Description: select the Enhanced/Alternate or Normal descriptors */
+static void stmmac_selec_desc_mode(struct stmmac_priv *priv)
+{
+ if (priv->plat->enh_desc) {
+ pr_info(" Enhanced/Alternate descriptors\n");
+ priv->hw->desc = &enh_desc_ops;
+ } else {
+ pr_info(" Normal descriptors\n");
+ priv->hw->desc = &ndesc_ops;
+ }
+}
+
+/**
+ * stmmac_get_hw_features
+ * @priv : private device pointer
+ * Description:
+ * new GMAC chip generations have a new register to indicate the
+ * presence of the optional feature/functions.
+ * This can be also used to override the value passed through the
+ * platform and necessary for old MAC10/100 and GMAC chips.
*/
static int stmmac_get_hw_features(struct stmmac_priv *priv)
{
(hw_cap & DMA_HW_FEAT_RWKSEL) >> 9;
priv->dma_cap.pmt_magic_frame =
(hw_cap & DMA_HW_FEAT_MGKSEL) >> 10;
- /*MMC*/
+ /* MMC */
priv->dma_cap.rmon = (hw_cap & DMA_HW_FEAT_MMCSEL) >> 11;
/* IEEE 1588-2002*/
priv->dma_cap.time_stamp =
priv->dma_cap.enh_desc =
(hw_cap & DMA_HW_FEAT_ENHDESSEL) >> 24;
- } else
- pr_debug("\tNo HW DMA feature register supported");
+ }
return hw_cap;
}
goto open_error;
}
+ stmmac_get_synopsys_id(priv);
+
+ priv->hw_cap_support = stmmac_get_hw_features(priv);
+
+ if (priv->hw_cap_support) {
+ pr_info(" Support DMA HW capability register");
+
+ /* We can override some gmac/dma configuration fields: e.g.
+ * enh_desc, tx_coe (e.g. that are passed through the
+ * platform) with the values from the HW capability
+ * register (if supported).
+ */
+ priv->plat->enh_desc = priv->dma_cap.enh_desc;
+ priv->plat->tx_coe = priv->dma_cap.tx_coe;
+ priv->plat->pmt = priv->dma_cap.pmt_remote_wake_up;
+
+ /* By default disable wol on magic frame if not supported */
+ if (!priv->dma_cap.pmt_magic_frame)
+ priv->wolopts &= ~WAKE_MAGIC;
+
+ } else
+ pr_info(" No HW DMA feature register supported");
+
+ /* Select the enhnaced/normal descriptor structures */
+ stmmac_selec_desc_mode(priv);
+
+ /* PMT module is not integrated in all the MAC devices. */
+ if (priv->plat->pmt) {
+ pr_info(" Remote wake-up capable\n");
+ device_set_wakeup_capable(priv->device, 1);
+ }
+
+ priv->rx_coe = priv->hw->mac->rx_coe(priv->ioaddr);
+ if (priv->rx_coe)
+ pr_info(" Checksum Offload Engine supported\n");
+ if (priv->plat->tx_coe)
+ pr_info(" Checksum insertion supported\n");
+
/* Create and initialize the TX/RX descriptors chains. */
priv->dma_tx_size = STMMAC_ALIGN(dma_txsize);
priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize);
/* Initialize the MAC Core */
priv->hw->mac->core_init(priv->ioaddr);
- stmmac_get_synopsys_id(priv);
-
- stmmac_get_hw_features(priv);
-
- priv->rx_coe = priv->hw->mac->rx_coe(priv->ioaddr);
- if (priv->rx_coe)
- pr_info("stmmac: Rx Checksum Offload Engine supported\n");
- if (priv->plat->tx_coe)
- pr_info("\tTX Checksum insertion supported\n");
netdev_update_features(dev);
/* Request the IRQ lines */
if (!priv->phydev)
return -EINVAL;
- spin_lock(&priv->lock);
ret = phy_mii_ioctl(priv->phydev, rq, cmd);
- spin_unlock(&priv->lock);
return ret;
}
struct net_device *dev = seq->private;
struct stmmac_priv *priv = netdev_priv(dev);
- if (!stmmac_get_hw_features(priv)) {
+ if (!priv->hw_cap_support) {
seq_printf(seq, "DMA HW features not supported\n");
return 0;
}
if (!device)
return -ENOMEM;
- if (priv->plat->enh_desc) {
- device->desc = &enh_desc_ops;
- pr_info("\tEnhanced descriptor structure\n");
- } else
- device->desc = &ndesc_ops;
-
priv->hw = device;
priv->hw->ring = &ring_mode_ops;
priv->ioaddr = addr;
- /* PMT module is not integrated in all the MAC devices. */
- if (plat_dat->pmt) {
- pr_info("\tPMT module supported\n");
- device_set_wakeup_capable(&pdev->dev, 1);
- }
/*
* On some platforms e.g. SPEAr the wake up irq differs from the mac irq
* The external wake up irq can be passed through the platform code
if (priv->wol_irq == -ENXIO)
priv->wol_irq = ndev->irq;
-
platform_set_drvdata(pdev, ndev);
/* Set the I/O base addr */
goto out_free_ndev;
}
- /* MAC HW revice detection */
+ /* MAC HW device detection */
ret = stmmac_mac_device_setup(ndev);
if (ret < 0)
goto out_plat_exit;
if (!ndev || !netif_running(ndev))
return 0;
+ if (priv->phydev)
+ phy_stop(priv->phydev);
+
spin_lock(&priv->lock);
netif_device_detach(ndev);
netif_stop_queue(ndev);
- if (priv->phydev)
- phy_stop(priv->phydev);
#ifdef CONFIG_STMMAC_TIMER
priv->tm->timer_stop();
#endif
napi_enable(&priv->napi);
- if (priv->phydev)
- phy_start(priv->phydev);
-
netif_start_queue(ndev);
spin_unlock(&priv->lock);
+
+ if (priv->phydev)
+ phy_start(priv->phydev);
+
return 0;
}
sbus_dp = op->dev.parent->of_node;
/* We can match PCI devices too, do not accept those here. */
- if (strcmp(sbus_dp->name, "sbus"))
+ if (strcmp(sbus_dp->name, "sbus") && strcmp(sbus_dp->name, "sbi"))
return err;
if (is_qfe) {
int result;
pr_debug("%s: called\n", __func__);
+
+ udbg_shutdown_ps3gelic();
+
result = ps3_open_hv_device(dev);
if (result) {
return port->priv;
}
+#ifdef CONFIG_PPC_EARLY_DEBUG_PS3GELIC
+extern void udbg_shutdown_ps3gelic(void);
+#else
+static inline void udbg_shutdown_ps3gelic(void) {}
+#endif
+
extern int gelic_card_set_irq_mask(struct gelic_card *card, u64 mask);
/* shared netdev ops */
extern void gelic_card_up(struct gelic_card *card);
return;
temac_iow(lp, XTE_LSW0_OFFSET, value);
temac_iow(lp, XTE_CTL0_OFFSET, CNTLREG_WRITE_ENABLE_MASK | reg);
+ temac_indirect_busywait(lp);
}
/**
struct temac_local *lp = netdev_priv(ndev);
int i;
+ /* Reset Local Link (DMA) */
+ lp->dma_out(lp, DMA_CONTROL_REG, DMA_CONTROL_RST);
+
for (i = 0; i < RX_BD_NUM; i++) {
if (!lp->rx_skb[i])
break;
phy_start(lp->phy_dev);
}
+ temac_device_reset(ndev);
+
rc = request_irq(lp->tx_irq, ll_temac_tx_irq, 0, ndev->name, ndev);
if (rc)
goto err_tx_irq;
if (rc)
goto err_rx_irq;
- temac_device_reset(ndev);
return 0;
err_rx_irq:
#include <linux/platform_device.h>
#include <linux/ptp_classify.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <mach/ixp46x_ts.h>
#include <mach/npe.h>
#include <mach/qmgr.h>
kernel code or by user space programs. Say Y here only if you have
the memory.
-endif /* HIPPI */
+endif # HIPPI
*/
macvlan_broadcast(skb, port, src->dev,
MACVLAN_MODE_VEPA);
+ else {
+ /* forward to original port. */
+ vlan = src;
+ ret = macvlan_broadcast_one(skb, vlan, eth, 0);
+ goto out;
+ }
+
return RX_HANDLER_PASS;
}
*
*/
#include <linux/phy.h>
+#include <linux/module.h>
#define RTL821x_PHYSR 0x11
#define RTL821x_PHYSR_DUPLEX 0x2000
#include <linux/usb/usbnet.h>
#include <linux/slab.h>
-#define DRIVER_VERSION "26-Sep-2011"
+#define DRIVER_VERSION "08-Nov-2011"
#define DRIVER_NAME "asix"
/* ASIX AX8817X based USB 2.0 Ethernet Devices */
#define MARVELL_CTRL_TXDELAY 0x0002
#define MARVELL_CTRL_RXDELAY 0x0080
-#define PHY_MODE_RTL8211CL 0x0004
+#define PHY_MODE_RTL8211CL 0x000C
/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
struct asix_data {
{
int phy_reg;
u32 phy_id;
+ int i;
- phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
- if (phy_reg < 0)
+ /* Poll for the rare case the FW or phy isn't ready yet. */
+ for (i = 0; i < 100; i++) {
+ phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
+ if (phy_reg != 0 && phy_reg != 0xFFFF)
+ break;
+ mdelay(1);
+ }
+
+ if (phy_reg <= 0 || phy_reg == 0xFFFF)
return 0;
phy_id = (phy_reg & 0xffff) << 16;
static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
{
- int ret;
+ int ret, embd_phy;
struct asix_data *data = (struct asix_data *)&dev->data;
u8 buf[ETH_ALEN];
u32 phyid;
dev->mii.reg_num_mask = 0x1f;
dev->mii.phy_id = asix_get_phy_addr(dev);
- phyid = asix_get_phyid(dev);
- dbg("PHYID=0x%08x", phyid);
-
dev->net->netdev_ops = &ax88772_netdev_ops;
dev->net->ethtool_ops = &ax88772_ethtool_ops;
- ret = ax88772_reset(dev);
+ embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
+
+ /* Reset the PHY to normal operation mode */
+ ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
+ if (ret < 0) {
+ dbg("Select PHY #1 failed: %d", ret);
+ return ret;
+ }
+
+ ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL);
+ if (ret < 0)
+ return ret;
+
+ msleep(150);
+
+ ret = asix_sw_reset(dev, AX_SWRESET_CLEAR);
if (ret < 0)
return ret;
+ msleep(150);
+
+ ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_PRTE);
+
+ /* Read PHYID register *AFTER* the PHY was reset properly */
+ phyid = asix_get_phyid(dev);
+ dbg("PHYID=0x%08x", phyid);
+
/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
if (dev->driver_info->flags & FLAG_FRAMING_AX) {
/* hard_mtu is still the default - the device does not support
__le16 eeprom;
u8 status;
int gpio0 = 0;
+ u32 phyid;
asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status);
dbg("GPIO Status: 0x%04x", status);
data->ledmode = 0;
gpio0 = 1;
} else {
- data->phymode = le16_to_cpu(eeprom) & 7;
+ data->phymode = le16_to_cpu(eeprom) & 0x7F;
data->ledmode = le16_to_cpu(eeprom) >> 8;
gpio0 = (le16_to_cpu(eeprom) & 0x80) ? 0 : 1;
}
dbg("GPIO0: %d, PhyMode: %d", gpio0, data->phymode);
+ /* Power up external GigaPHY through AX88178 GPIO pin */
asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 | AX_GPIO_GPO1EN, 40);
if ((le16_to_cpu(eeprom) >> 8) != 1) {
asix_write_gpio(dev, 0x003c, 30);
asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30);
}
+ /* Read PHYID register *AFTER* powering up PHY */
+ phyid = asix_get_phyid(dev);
+ dbg("PHYID=0x%08x", phyid);
+
+ /* Set AX88178 to enable MII/GMII/RGMII interface for external PHY */
+ asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL);
+
asix_sw_reset(dev, 0);
msleep(150);
{
int ret;
u8 buf[ETH_ALEN];
- u32 phyid;
struct asix_data *data = (struct asix_data *)&dev->data;
data->eeprom_len = AX88772_EEPROM_LEN;
dev->net->netdev_ops = &ax88178_netdev_ops;
dev->net->ethtool_ops = &ax88178_ethtool_ops;
- phyid = asix_get_phyid(dev);
- dbg("PHYID=0x%08x", phyid);
+ /* Blink LEDS so users know driver saw dongle */
+ asix_sw_reset(dev, 0);
+ msleep(150);
- ret = ax88178_reset(dev);
- if (ret < 0)
- return ret;
+ asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD);
+ msleep(150);
/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
if (dev->driver_info->flags & FLAG_FRAMING_AX) {
{
USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM,
USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
- .driver_info = (unsigned long)&wwan_info,
+ .driver_info = 0,
},
/*
#include <linux/if_ether.h>
#include <linux/if_arp.h>
#include <linux/inetdevice.h>
+#include <linux/module.h>
/*
* The device has a CDC ACM port for modem control (it claims to be
}
frame = (struct vl600_frame_hdr *) buf->data;
- /* NOTE: Should check that frame->magic == 0x53544448?
- * Otherwise if we receive garbage at the beginning of the frame
- * we may end up allocating a huge buffer and saving all the
- * future incoming data into it. */
+ /* Yes, check that frame->magic == 0x53544448 (or 0x44544d48),
+ * otherwise we may run out of memory w/a bad packet */
+ if (ntohl(frame->magic) != 0x53544448 &&
+ ntohl(frame->magic) != 0x44544d48)
+ goto error;
if (buf->len < sizeof(*frame) ||
buf->len != le32_to_cpup(&frame->len)) {
* overwrite the remaining fields.
*/
packet = (struct vl600_pkt_hdr *) skb->data;
+ /* The VL600 wants IPv6 packets to have an IPv4 ethertype
+ * Since this modem only supports IPv4 and IPv6, just set all
+ * frames to 0x0800 (ETH_P_IP)
+ */
+ packet->h_proto = htons(ETH_P_IP);
memset(&packet->dummy, 0, sizeof(packet->dummy));
packet->len = cpu_to_le32(orig_len);
if (skb->len < full_len) /* Pad */
skb_put(skb, full_len - skb->len);
- /* The VL600 wants IPv6 packets to have an IPv4 ethertype
- * Check if this is an IPv6 packet, and set the ethertype
- * to 0x800
- */
- if ((skb->data[sizeof(struct vl600_pkt_hdr *) + 0x22] & 0xf0) == 0x60) {
- skb->data[sizeof(struct vl600_pkt_hdr *) + 0x20] = 0x08;
- skb->data[sizeof(struct vl600_pkt_hdr *) + 0x21] = 0;
- }
-
return skb;
}
static const struct driver_info vl600_info = {
.description = "LG VL600 modem",
- .flags = FLAG_ETHER | FLAG_RX_ASSEMBLE,
+ .flags = FLAG_RX_ASSEMBLE | FLAG_WWAN,
.bind = vl600_bind,
.unbind = vl600_unbind,
.status = usbnet_cdc_status,
#define USB_VENDOR_ID_SMSC (0x0424)
#define USB_PRODUCT_ID_LAN7500 (0x7500)
#define USB_PRODUCT_ID_LAN7505 (0x7505)
+#define RXW_PADDING 2
#define check_warn(ret, fmt, args...) \
({ if (ret < 0) netdev_warn(dev->net, fmt, ##args); })
memcpy(&rx_cmd_b, skb->data, sizeof(rx_cmd_b));
le32_to_cpus(&rx_cmd_b);
- skb_pull(skb, 4 + NET_IP_ALIGN);
+ skb_pull(skb, 4 + RXW_PADDING);
packet = skb->data;
/* get the packet length */
- size = (rx_cmd_a & RX_CMD_A_LEN) - NET_IP_ALIGN;
- align_count = (4 - ((size + NET_IP_ALIGN) % 4)) % 4;
+ size = (rx_cmd_a & RX_CMD_A_LEN) - RXW_PADDING;
+ align_count = (4 - ((size + RXW_PADDING) % 4)) % 4;
if (unlikely(rx_cmd_a & RX_CMD_A_RED)) {
netif_dbg(dev, rx_err, dev->net,
unsigned long flags;
int retval;
- skb_tx_timestamp(skb);
+ if (skb)
+ skb_tx_timestamp(skb);
// some devices want funky USB-level framing, for
// win32 driver (usually) and/or hardware quirks
#include <net/dst.h>
#include <net/xfrm.h>
#include <linux/veth.h>
+#include <linux/module.h>
#define DRV_NAME "veth"
#define DRV_VERSION "1.0"
*
*/
+#include <linux/module.h>
#include <net/ip6_checksum.h>
#include "vmxnet3_int.h"
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/wimax/i2400m.h>
+#include <linux/export.h>
+#include <linux/moduleparam.h>
#define D_SUBMODULE control
#include <linux/etherdevice.h>
#include <linux/spinlock.h>
#include <linux/device.h>
+#include <linux/export.h>
#include "i2400m.h"
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/usb.h>
+#include <linux/export.h>
#include "i2400m.h"
#include <linux/slab.h>
#include <linux/netdevice.h>
#include <linux/ethtool.h>
+#include <linux/export.h>
#include "i2400m.h"
#include <linux/if_arp.h>
#include <linux/netdevice.h>
#include <linux/workqueue.h>
+#include <linux/export.h>
+#include <linux/moduleparam.h>
#include "i2400m.h"
#include <linux/mmc/sdio_func.h>
#include "i2400m-sdio.h"
#include <linux/wimax/i2400m.h>
+#include <linux/module.h>
#define D_SUBMODULE main
#include "sdio-debug-levels.h"
*/
#include <linux/netdevice.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include "i2400m.h"
#include <linux/wimax/i2400m.h>
#include <linux/debugfs.h>
#include <linux/slab.h>
+#include <linux/module.h>
#define D_SUBMODULE usb
#include <linux/delay.h>
#include <linux/crc32.h>
#include <linux/eeprom_93cx6.h>
+#include <linux/module.h>
#include <net/mac80211.h>
#include "adm8211.h"
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGES.
*/
+#include <linux/export.h>
+#include <linux/moduleparam.h>
-#include <linux/module.h>
#include <linux/seq_file.h>
#include <linux/list.h>
#include "debug.h"
#include <linux/pci.h>
#include <linux/pci-aspm.h>
#include <linux/etherdevice.h>
+#include <linux/module.h>
#include "../ath.h"
#include "ath5k.h"
#include "debug.h"
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#include <linux/moduleparam.h>
+
#include "core.h"
#include "cfg80211.h"
#include "debug.h"
#include <linux/circ_buf.h>
#include <linux/fs.h>
#include <linux/vmalloc.h>
+#include <linux/export.h>
#include "debug.h"
#include "target.h"
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#include <linux/module.h>
#include <linux/mmc/card.h>
#include <linux/mmc/mmc.h>
#include <linux/mmc/host.h>
#include <linux/nl80211.h>
#include <linux/platform_device.h>
#include <linux/ath9k_platform.h>
+#include <linux/module.h>
#include "ath9k.h"
static const struct platform_device_id ath9k_platform_id_table[] = {
*/
#include <linux/kernel.h>
+#include <linux/export.h>
#include "hw.h"
#include "hw-ops.h"
/* Do PA Calibration */
ar9002_hw_pa_cal(ah, true);
- /* Do NF Calibration after DC offset and other calibrations */
- ath9k_hw_loadnf(ah, chan);
- ath9k_hw_start_nfcal(ah, true);
-
if (ah->caldata)
ah->caldata->nfcal_pending = true;
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#include <linux/moduleparam.h>
#include "hw.h"
#include "ar5008_initvals.h"
#include "ar9001_initvals.h"
*/
#include "hw.h"
+#include <linux/export.h>
#define AR_BufLen 0x00000fff
int i;
bool restore;
- if (!(ah->caps.hw_caps & ATH9K_HW_CAP_RTT) || !ah->caldata)
+ if (!ah->caldata)
return false;
hist = &ah->caldata->rtt_hist;
+ if (!hist->num_readings)
+ return false;
+
ar9003_hw_rtt_enable(ah);
- ar9003_hw_rtt_set_mask(ah, 0x10);
+ ar9003_hw_rtt_set_mask(ah, 0x00);
for (i = 0; i < AR9300_MAX_CHAINS; i++) {
if (!(ah->rxchainmask & (1 << i)))
continue;
if (is_reusable && (hist->num_readings < RTT_HIST_MAX)) {
u32 *table;
+ hist->num_readings++;
for (i = 0; i < AR9300_MAX_CHAINS; i++) {
if (!(ah->rxchainmask & (1 << i)))
continue;
ar9003_hw_rtt_disable(ah);
}
- ath9k_hw_loadnf(ah, chan);
- ath9k_hw_start_nfcal(ah, true);
-
/* Initialize list pointers */
ah->cal_list = ah->cal_list_last = ah->cal_list_curr = NULL;
ah->supp_cals = IQ_MISMATCH_CAL;
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#include <linux/export.h>
#include "hw.h"
#include "ar9003_mac.h"
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#include <linux/export.h>
#include "hw.h"
#include "ar9003_phy.h"
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#include <linux/export.h>
#include "hw.h"
#include "ar9003_phy.h"
#define AR_PHY_TXGAIN_TABLE (AR_SM_BASE + 0x300)
-#define AR_PHY_TX_IQCAL_CONTROL_0 (AR_SM_BASE + AR_SREV_9485(ah) ? \
- 0x3c4 : 0x444)
-#define AR_PHY_TX_IQCAL_CONTROL_1 (AR_SM_BASE + AR_SREV_9485(ah) ? \
- 0x3c8 : 0x448)
-#define AR_PHY_TX_IQCAL_START (AR_SM_BASE + AR_SREV_9485(ah) ? \
- 0x3c4 : 0x440)
-#define AR_PHY_TX_IQCAL_STATUS_B0 (AR_SM_BASE + AR_SREV_9485(ah) ? \
- 0x3f0 : 0x48c)
+#define AR_PHY_TX_IQCAL_CONTROL_0 (AR_SM_BASE + (AR_SREV_9485(ah) ? \
+ 0x3c4 : 0x444))
+#define AR_PHY_TX_IQCAL_CONTROL_1 (AR_SM_BASE + (AR_SREV_9485(ah) ? \
+ 0x3c8 : 0x448))
+#define AR_PHY_TX_IQCAL_START (AR_SM_BASE + (AR_SREV_9485(ah) ? \
+ 0x3c4 : 0x440))
+#define AR_PHY_TX_IQCAL_STATUS_B0 (AR_SM_BASE + (AR_SREV_9485(ah) ? \
+ 0x3f0 : 0x48c))
#define AR_PHY_TX_IQCAL_CORR_COEFF_B0(_i) (AR_SM_BASE + \
(AR_SREV_9485(ah) ? \
0x3d0 : 0x450) + ((_i) << 2))
#define AR_SWITCH_TABLE_ALL_S (0)
#define AR_PHY_65NM_CH0_THERM (AR_SREV_9300(ah) ? 0x16290 :\
- (AR_SREV_9485(ah) ? 0x1628c : 0x16294))
+ (AR_SREV_9462(ah) ? 0x16294 : 0x1628c))
#define AR_PHY_65NM_CH0_THERM_LOCAL 0x80000000
#define AR_PHY_65NM_CH0_THERM_LOCAL_S 31
#define AR_PHY_65NM_CH2_RXTX2 0x16904
#define AR_CH0_TOP2 (AR_SREV_9300(ah) ? 0x1628c : \
- (AR_SREV_9485(ah) ? 0x16284 : 0x16290))
+ (AR_SREV_9462(ah) ? 0x16290 : 0x16284))
#define AR_CH0_TOP2_XPABIASLVL 0xf000
#define AR_CH0_TOP2_XPABIASLVL_S 12
#define AR_CH0_XTAL (AR_SREV_9300(ah) ? 0x16294 : \
- (AR_SREV_9485(ah) ? 0x16290 : 0x16298))
+ (AR_SREV_9462(ah) ? 0x16298 : 0x16290))
#define AR_CH0_XTAL_CAPINDAC 0x7f000000
#define AR_CH0_XTAL_CAPINDAC_S 24
#define AR_CH0_XTAL_CAPOUTDAC 0x00fe0000
#define AR_PHY_TPC_5_B1 (AR_SM1_BASE + 0x208)
#define AR_PHY_TPC_6_B1 (AR_SM1_BASE + 0x20c)
#define AR_PHY_TPC_11_B1 (AR_SM1_BASE + 0x220)
-#define AR_PHY_PDADC_TAB_1 (AR_SM1_BASE + (AR_SREV_AR9300(ah) ? \
- 0x240 : 0x280))
+#define AR_PHY_PDADC_TAB_1 (AR_SM1_BASE + (AR_SREV_AR9462(ah) ? \
+ 0x280 : 0x240))
#define AR_PHY_TPC_19_B1 (AR_SM1_BASE + 0x240)
#define AR_PHY_TPC_19_B1_ALPHA_THERM 0xff
#define AR_PHY_TPC_19_B1_ALPHA_THERM_S 0
#define AR_PHY_AIC_SRAM_ADDR_B1 (AR_SM1_BASE + 0x5f0)
#define AR_PHY_AIC_SRAM_DATA_B1 (AR_SM1_BASE + 0x5f4)
-#define AR_PHY_RTT_TABLE_SW_INTF_B(i) (0x384 + (i) ? \
- AR_SM1_BASE : AR_SM_BASE)
-#define AR_PHY_RTT_TABLE_SW_INTF_1_B(i) (0x388 + (i) ? \
- AR_SM1_BASE : AR_SM_BASE)
+#define AR_PHY_RTT_TABLE_SW_INTF_B(i) (0x384 + ((i) ? \
+ AR_SM1_BASE : AR_SM_BASE))
+#define AR_PHY_RTT_TABLE_SW_INTF_1_B(i) (0x388 + ((i) ? \
+ AR_SM1_BASE : AR_SM_BASE))
/*
* Channel 2 Register Map
*/
{0x000160ac, 0x24611800},
{0x000160b0, 0x03284f3e},
{0x0001610c, 0x00170000},
- {0x00016140, 0x10804008},
+ {0x00016140, 0x50804008},
};
static const u32 ar9485_1_1_mac_postamble[][5] = {
static const u32 ar9485_1_1_pcie_phy_pll_on_clkreq_enable_L1[][2] = {
/* Addr allmodes */
- {0x00018c00, 0x10052e5e},
+ {0x00018c00, 0x18052e5e},
{0x00018c04, 0x000801d8},
{0x00018c08, 0x0000080c},
};
static const u32 ar9485_1_1_pcie_phy_clkreq_disable_L1[][2] = {
/* Addr allmodes */
- {0x00018c00, 0x10013e5e},
+ {0x00018c00, 0x18013e5e},
{0x00018c04, 0x000801d8},
{0x00018c08, 0x0000080c},
};
static const u32 ar9485_1_1_pcie_phy_pll_on_clkreq_disable_L1[][2] = {
/* Addr allmodes */
- {0x00018c00, 0x10012e5e},
+ {0x00018c00, 0x18012e5e},
{0x00018c04, 0x000801d8},
{0x00018c08, 0x0000080c},
};
static const u32 ar9485_1_1_pcie_phy_clkreq_enable_L1[][2] = {
/* Addr allmodes */
- {0x00018c00, 0x10053e5e},
+ {0x00018c00, 0x18053e5e},
{0x00018c04, 0x000801d8},
{0x00018c08, 0x0000080c},
};
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#include <linux/export.h>
#include "hw.h"
enum ath_bt_mode {
#include "hw.h"
#include "hw-ops.h"
+#include <linux/export.h>
/* Common calibration code */
#include <linux/slab.h>
#include <linux/vmalloc.h>
+#include <linux/export.h>
#include <asm/unaligned.h>
#include "ath9k.h"
#include <linux/io.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <asm/unaligned.h>
#include "hw.h"
if (!ath9k_hw_init_cal(ah, chan))
return -EIO;
+ ath9k_hw_loadnf(ah, chan);
+ ath9k_hw_start_nfcal(ah, true);
+
ENABLE_REGWRITE_BUFFER(ah);
ath9k_hw_restore_chainmask(ah);
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/ath9k_platform.h>
+#include <linux/module.h>
#include "ath9k.h"
#include "hw.h"
#include "hw-ops.h"
+#include <linux/export.h>
static void ath9k_hw_set_txq_interrupts(struct ath_hw *ah,
struct ath9k_tx_queue_info *qi)
#include <linux/pci.h>
#include <linux/pci-aspm.h>
#include <linux/ath9k_platform.h>
+#include <linux/module.h>
#include "ath9k.h"
static DEFINE_PCI_DEVICE_TABLE(ath_pci_id_table) = {
*/
#include <linux/slab.h>
+#include <linux/export.h>
#include "ath9k.h"
#include <linux/kernel.h>
#include <linux/firmware.h>
#include <linux/crc32.h>
+#include <linux/module.h>
#include "carl9170.h"
#include "fwcmd.h"
#include "version.h"
super = (void *)skb->data;
txinfo->status.ampdu_len = super->s.rix;
txinfo->status.ampdu_ack_len = super->s.cnt;
- } else if (txinfo->flags & IEEE80211_TX_STAT_ACK) {
+ } else if ((txinfo->flags & IEEE80211_TX_STAT_ACK) &&
+ !(txinfo->flags & IEEE80211_TX_CTL_REQ_TX_STATUS)) {
/*
* drop redundant tx_status reports:
*
*
* 3. minstrel_ht is picky, it only accepts
* reports of frames with the TX_STATUS_AMPDU flag.
+ *
+ * 4. mac80211 is not particularly interested in
+ * feedback either [CTL_REQ_TX_STATUS not set]
*/
dev_kfree_skb_any(skb);
return;
} else {
/*
- * Frame has failed, but we want to keep it in
- * case it was lost due to a power-state
- * transition.
+ * Either the frame transmission has failed or
+ * mac80211 requested tx status.
*/
}
}
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#include <linux/export.h>
#include "ath.h"
const char *ath_opmode_to_string(enum nl80211_iftype opmode)
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#include <linux/export.h>
#include <asm/unaligned.h>
#include "ath.h"
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#include <linux/export.h>
#include <asm/unaligned.h>
#include <net/mac80211.h>
*/
#include <linux/kernel.h>
+#include <linux/export.h>
#include <net/cfg80211.h>
#include <net/mac80211.h>
#include "regd.h"
int r;
sband = wiphy->bands[IEEE80211_BAND_2GHZ];
+ if (!sband)
+ return;
/*
* If no country IE has been received always enable active scan
#include <linux/delay.h>
#include <linux/init.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/if_arp.h>
#include <linux/etherdevice.h>
#include <linux/firmware.h>
#include <linux/ssb/ssb.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ciscode.h>
}
}
+/* TODO: verify if needed for SSLPN or LCN */
static u16 b43_generate_tx_phy_ctl1(struct b43_wldev *dev, u8 bitrate)
{
const struct b43_phy *phy = &dev->phy;
unsigned int plcp_fragment_len;
u32 mac_ctl = 0;
u16 phy_ctl = 0;
+ bool fill_phy_ctl1 = (phy->type == B43_PHYTYPE_LP ||
+ phy->type == B43_PHYTYPE_N ||
+ phy->type == B43_PHYTYPE_HT);
u8 extra_ft = 0;
struct ieee80211_rate *txrate;
struct ieee80211_tx_rate *rates;
extra_ft |= B43_TXH_EFT_RTSFB_CCK;
if (rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS &&
- phy->type == B43_PHYTYPE_N) {
+ fill_phy_ctl1) {
txhdr->phy_ctl1_rts = cpu_to_le16(
b43_generate_tx_phy_ctl1(dev, rts_rate));
txhdr->phy_ctl1_rts_fb = cpu_to_le16(
break;
}
- if (phy->type == B43_PHYTYPE_N) {
+ if (fill_phy_ctl1) {
txhdr->phy_ctl1 =
cpu_to_le16(b43_generate_tx_phy_ctl1(dev, rate));
txhdr->phy_ctl1_fb =
/* Link quality statistics */
switch (chanstat & B43_RX_CHAN_PHYTYPE) {
+ case B43_PHYTYPE_HT:
+ /* TODO: is max the right choice? */
+ status.signal = max_t(__s8,
+ max(rxhdr->phy_ht_power0, rxhdr->phy_ht_power1),
+ rxhdr->phy_ht_power2);
+ break;
case B43_PHYTYPE_N:
+ /* Broadcom has code for min and avg, but always uses max */
if (rxhdr->power0 == 16 || rxhdr->power0 == 32)
status.signal = max(rxhdr->power1, rxhdr->power2);
else
#endif
return;
drop:
- b43dbg(dev->wl, "RX: Packet dropped\n");
dev_kfree_skb_any(skb);
}
} __packed;
} __packed;
union {
+ /* HT-PHY */
+ struct {
+ PAD_BYTES(1);
+ __s8 phy_ht_power0;
+ } __packed;
+
/* RSSI for N-PHYs */
struct {
__s8 power2;
__le16 phy_status2; /* PHY RX Status 2 */
} __packed;
- __le16 phy_status3; /* PHY RX Status 3 */
+ union {
+ /* HT-PHY */
+ struct {
+ __s8 phy_ht_power1;
+ __s8 phy_ht_power2;
+ } __packed;
+
+ __le16 phy_status3; /* PHY RX Status 3 */
+ } __packed;
union {
/* Tested with 598.314, 644.1001 and 666.2 */
struct {
#include <linux/delay.h>
#include <linux/init.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/if_arp.h>
#include <linux/etherdevice.h>
#include <linux/firmware.h>
#include <linux/types.h>
#include <linux/netdevice.h>
+#include <linux/export.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
#include <linux/sched.h>
static uint _dma_ctrlflags(struct dma_info *di, uint mask, uint flags)
{
- uint dmactrlflags = di->dma.dmactrlflags;
+ uint dmactrlflags;
if (di == NULL) {
- DMA_ERROR(("%s: _dma_ctrlflags: NULL dma handle\n", di->name));
+ DMA_ERROR(("_dma_ctrlflags: NULL dma handle\n"));
return 0;
}
+ dmactrlflags = di->dma.dmactrlflags;
dmactrlflags &= ~mask;
dmactrlflags |= flags;
#include <linux/sched.h>
#include <linux/firmware.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <net/mac80211.h>
#include <defs.h>
#include "nicpci.h"
#include <linux/etherdevice.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <net/lib80211.h>
#include <linux/if_arp.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include "hostap_80211.h"
#include "hostap_common.h"
#include <linux/random.h>
#include <linux/if_arp.h>
#include <linux/slab.h>
+#include <linux/export.h>
+#include <linux/moduleparam.h>
#include "hostap_wlan.h"
#include "hostap.h"
#include <linux/if_arp.h>
#include <linux/sched.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include "hostap_wlan.h"
#include "hostap.h"
#include "hostap_ap.h"
#include <linux/sched.h>
#include <linux/ethtool.h>
#include <linux/if_arp.h>
+#include <linux/module.h>
#include <net/lib80211.h>
#include "hostap_wlan.h"
#include <linux/types.h>
#include <linux/proc_fs.h>
+#include <linux/export.h>
#include <net/lib80211.h>
#include "hostap_wlan.h"
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*****************************************************************************/
#include <linux/ieee80211.h>
+#include <linux/export.h>
#include <net/mac80211.h>
#include <linux/etherdevice.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <net/mac80211.h>
#include <asm/unaligned.h>
#include "iwl-eeprom.h"
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/etherdevice.h>
+#include <linux/export.h>
#include <net/mac80211.h>
#include "iwl-eeprom.h"
#include <linux/etherdevice.h>
#include <linux/sched.h>
#include <linux/lockdep.h>
+#include <linux/export.h>
#include "iwl-dev.h"
#include "iwl-core.h"
#include <linux/etherdevice.h>
#include <linux/sched.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <net/mac80211.h>
#include "iwl-eeprom.h"
#include "iwl-dev.h"
{
if (iwl_trans_check_stuck_queue(trans(priv), txq)) {
int ret;
- if (txq == priv->shrd->cmd_queue) {
- /*
- * validate command queue still working
- * by sending "ECHO" command
- */
- if (!iwl_cmd_echo_test(priv))
- return 0;
- else
- IWL_DEBUG_HC(priv, "echo testing fail\n");
- }
ret = iwl_force_reset(priv, IWL_FW_RESET, false);
return (ret == -EAGAIN) ? 0 : 1;
}
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/
+#include <linux/module.h>
#include <linux/pci.h>
#include <linux/pci-aspm.h>
pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00);
err = pci_enable_msi(pdev);
- if (err) {
- dev_printk(KERN_ERR, &pdev->dev, "pci_enable_msi failed");
- goto out_iounmap;
- }
+ if (err)
+ dev_printk(KERN_ERR, &pdev->dev,
+ "pci_enable_msi failed(0X%x)", err);
/* TODO: Move this away, not needed if not MSI */
/* enable rfkill interrupt: hw bug w/a */
out_disable_msi:
pci_disable_msi(pdev);
-out_iounmap:
pci_iounmap(pdev, pci_bus->hw_base);
out_pci_release_regions:
pci_set_drvdata(pdev, NULL);
struct iwl_queue *q = &txq->q;
enum dma_data_direction dma_dir;
unsigned long flags;
+ spinlock_t *lock;
if (!q->n_bd)
return;
/* In the command queue, all the TBs are mapped as BIDI
* so unmap them as such.
*/
- if (txq_id == trans->shrd->cmd_queue)
+ if (txq_id == trans->shrd->cmd_queue) {
dma_dir = DMA_BIDIRECTIONAL;
- else
+ lock = &trans->hcmd_lock;
+ } else {
dma_dir = DMA_TO_DEVICE;
+ lock = &trans->shrd->sta_lock;
+ }
- spin_lock_irqsave(&trans->shrd->sta_lock, flags);
+ spin_lock_irqsave(lock, flags);
while (q->write_ptr != q->read_ptr) {
/* The read_ptr needs to bound by q->n_window */
iwlagn_txq_free_tfd(trans, txq, get_cmd_index(q, q->read_ptr),
dma_dir);
q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd);
}
- spin_unlock_irqrestore(&trans->shrd->sta_lock, flags);
+ spin_unlock_irqrestore(lock, flags);
}
/**
return 0;
}
-static void iwl_trans_pcie_disable_sync_irq(struct iwl_trans *trans)
+static void iwl_trans_pcie_stop_device(struct iwl_trans *trans)
{
unsigned long flags;
- struct iwl_trans_pcie *trans_pcie =
- IWL_TRANS_GET_PCIE_TRANS(trans);
+ struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
+ /* tell the device to stop sending interrupts */
spin_lock_irqsave(&trans->shrd->lock, flags);
iwl_disable_interrupts(trans);
spin_unlock_irqrestore(&trans->shrd->lock, flags);
- /* wait to make sure we flush pending tasklet*/
- synchronize_irq(bus(trans)->irq);
- tasklet_kill(&trans_pcie->irq_tasklet);
-}
-
-static void iwl_trans_pcie_stop_device(struct iwl_trans *trans)
-{
- /* stop and reset the on-board processor */
- iwl_write32(bus(trans), CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
-
- /* tell the device to stop sending interrupts */
- iwl_trans_pcie_disable_sync_irq(trans);
-
/* device going down, Stop using ICT table */
iwl_disable_ict(trans);
/* Stop the device, and put it in low power state */
iwl_apm_stop(priv(trans));
+
+ /* Upon stop, the APM issues an interrupt if HW RF kill is set.
+ * Clean again the interrupt here
+ */
+ spin_lock_irqsave(&trans->shrd->lock, flags);
+ iwl_disable_interrupts(trans);
+ spin_unlock_irqrestore(&trans->shrd->lock, flags);
+
+ /* wait to make sure we flush pending tasklet*/
+ synchronize_irq(bus(trans)->irq);
+ tasklet_kill(&trans_pcie->irq_tasklet);
+
+ /* stop and reset the on-board processor */
+ iwl_write32(bus(trans), CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
}
static int iwl_trans_pcie_tx(struct iwl_trans *trans, struct sk_buff *skb,
#include <linux/ieee80211.h>
#include <linux/sched.h>
#include <linux/slab.h>
+#include <linux/moduleparam.h>
#include "iwm.h"
#include "bus.h"
#include <linux/kernel.h>
#include <linux/bitops.h>
#include <linux/debugfs.h>
+#include <linux/export.h>
#include "iwm.h"
#include "bus.h"
#include <linux/ieee80211.h>
#include <linux/wireless.h>
#include <linux/slab.h>
+#include <linux/moduleparam.h>
#include "iwm.h"
#include "debug.h"
*/
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/slab.h>
#include <linux/netdevice.h>
#include <linux/debugfs.h>
if (channel &&
!(channel->flags & IEEE80211_CHAN_DISABLED))
cfg80211_inform_bss(wiphy, channel,
- bssid, le64_to_cpu(*(__le64 *)tsfdesc),
+ bssid, get_unaligned_le64(tsfdesc),
capa, intvl, ie, ielen,
LBS_SCAN_RSSI_TO_MBM(rssi),
GFP_KERNEL);
le16_to_cpu(scan_cmd->hdr.size),
lbs_ret_scan, 0);
- if (priv->scan_channel >= priv->scan_req->n_channels) {
+ if (priv->scan_channel >= priv->scan_req->n_channels)
/* Mark scan done */
- if (priv->internal_scan)
- kfree(priv->scan_req);
- else
- cfg80211_scan_done(priv->scan_req, false);
-
- priv->scan_req = NULL;
- }
+ lbs_scan_done(priv);
/* Restart network */
if (carrier)
lbs_deb_leave(LBS_DEB_CFG80211);
}
+/*
+ * Clean up priv->scan_req. Should be used to handle the allocation details.
+ */
+void lbs_scan_done(struct lbs_private *priv)
+{
+ WARN_ON(!priv->scan_req);
+
+ if (priv->internal_scan)
+ kfree(priv->scan_req);
+ else
+ cfg80211_scan_done(priv->scan_req, false);
+
+ priv->scan_req = NULL;
+}
+
static int lbs_cfg_scan(struct wiphy *wiphy,
struct net_device *dev,
struct cfg80211_scan_request *request)
void lbs_send_disconnect_notification(struct lbs_private *priv);
void lbs_send_mic_failureevent(struct lbs_private *priv, u32 event);
+void lbs_scan_done(struct lbs_private *priv);
void lbs_scan_deinit(struct lbs_private *priv);
int lbs_disconnect(struct lbs_private *priv, u16 reason);
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/if_arp.h>
+#include <linux/export.h>
#include "decl.h"
#include "cfg.h"
#include <linux/mm.h>
#include <linux/string.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include "decl.h"
#include "cmd.h"
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/slab.h>
#include <linux/firmware.h>
#include <linux/netdevice.h>
#include <linux/hardirq.h>
#include <linux/interrupt.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/firmware.h>
#include <linux/jiffies.h>
#include <linux/list.h>
spin_unlock_irqrestore(&card->buffer_lock, flags);
break;
default:
+ kfree(packet);
netdev_err(priv->dev, "can't transfer buffer of type %d\n",
type);
err = -EINVAL;
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/delay.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/firmware.h>
#include <linux/netdevice.h>
#include <linux/slab.h>
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/delay.h>
#include <linux/etherdevice.h>
#include <linux/hardirq.h>
lbs_update_mcast(priv);
cancel_delayed_work_sync(&priv->scan_work);
- if (priv->scan_req) {
- cfg80211_scan_done(priv->scan_req, false);
- priv->scan_req = NULL;
- }
+ if (priv->scan_req)
+ lbs_scan_done(priv);
netif_carrier_off(priv->dev);
#include <linux/hardirq.h>
#include <linux/slab.h>
#include <linux/types.h>
+#include <linux/export.h>
#include <net/cfg80211.h>
#include "defs.h"
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/sched.h>
+#include <linux/export.h>
#include <net/cfg80211.h>
#include "host.h"
#include <linux/hardirq.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include "libertas_tf.h"
#include "if_usb.h"
#include <linux/delay.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/firmware.h>
#include <linux/netdevice.h>
#include <linux/slab.h>
#include <linux/slab.h>
#include <linux/etherdevice.h>
+#include <linux/module.h>
#include "libertas_tf.h"
#define DRIVER_RELEASE_VERSION "004.p0"
#include <linux/rtnetlink.h>
#include <linux/etherdevice.h>
#include <linux/debugfs.h>
+#include <linux/module.h>
#include <net/genetlink.h>
#include "mac80211_hwsim.h"
wildcard_ssid_tlv->header.len = cpu_to_le16(
(u16) (ssid_len + sizeof(wildcard_ssid_tlv->
max_ssid_length)));
- wildcard_ssid_tlv->max_ssid_length =
- user_scan_in->ssid_list[ssid_idx].max_len;
+
+ /* max_ssid_length = 0 tells firmware to perform
+ specific scan for the SSID filled */
+ wildcard_ssid_tlv->max_ssid_length = 0;
memcpy(wildcard_ssid_tlv->ssid,
user_scan_in->ssid_list[ssid_idx].ssid,
s32 rssi, const u8 *ie_buf, size_t ie_len,
u16 beacon_period, u16 cap_info_bitmap, u8 band)
{
- struct mwifiex_bssdescriptor *bss_desc = NULL;
+ struct mwifiex_bssdescriptor *bss_desc;
int ret;
unsigned long flags;
u8 *beacon_ie;
beacon_ie = kmemdup(ie_buf, ie_len, GFP_KERNEL);
if (!beacon_ie) {
+ kfree(bss_desc);
dev_err(priv->adapter->dev, " failed to alloc beacon_ie\n");
return -ENOMEM;
}
#include <linux/slab.h>
#include <linux/firmware.h>
#include <linux/device.h>
+#include <linux/module.h>
#include "hermes.h"
#include "hermes_dld.h"
#include <net/mac80211.h>
#include <linux/crc-ccitt.h>
+#include <linux/export.h>
#include "p54.h"
#include "eeprom.h"
#include <linux/slab.h>
#include <linux/firmware.h>
#include <linux/etherdevice.h>
+#include <linux/export.h>
#include <net/mac80211.h>
#include <linux/slab.h>
#include <linux/firmware.h>
#include <linux/etherdevice.h>
+#include <linux/module.h>
#include <net/mac80211.h>
#include <linux/etherdevice.h>
#include <linux/delay.h>
#include <linux/completion.h>
+#include <linux/module.h>
#include <net/mac80211.h>
#include "p54.h"
#include <linux/etherdevice.h>
#include <linux/delay.h>
#include <linux/crc32.h>
+#include <linux/module.h>
#include <net/mac80211.h>
#include "p54.h"
* published by the Free Software Foundation.
*/
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/firmware.h>
#include <linux/etherdevice.h>
{ USB_DEVICE(0x050d, 0x935b) },
/* Buffalo */
{ USB_DEVICE(0x0411, 0x00e8) },
+ { USB_DEVICE(0x0411, 0x0158) },
{ USB_DEVICE(0x0411, 0x016f) },
{ USB_DEVICE(0x0411, 0x01a2) },
/* Corega */
* Powersaving work
*/
struct delayed_work autowakeup_work;
+ struct work_struct sleep_work;
/*
* Data queue arrays for RX, TX, Beacon and ATIM.
return NULL;
}
+static void rt2x00lib_sleep(struct work_struct *work)
+{
+ struct rt2x00_dev *rt2x00dev =
+ container_of(work, struct rt2x00_dev, sleep_work);
+
+ if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+ return;
+
+ /*
+ * Check again is powersaving is enabled, to prevent races from delayed
+ * work execution.
+ */
+ if (!test_bit(CONFIG_POWERSAVING, &rt2x00dev->flags))
+ rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf,
+ IEEE80211_CONF_CHANGE_PS);
+}
+
static void rt2x00lib_rxdone_check_ps(struct rt2x00_dev *rt2x00dev,
struct sk_buff *skb,
struct rxdone_entry_desc *rxdesc)
cam |= (tim_ie->bitmap_ctrl & 0x01);
if (!cam && !test_bit(CONFIG_POWERSAVING, &rt2x00dev->flags))
- rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf,
- IEEE80211_CONF_CHANGE_PS);
+ queue_work(rt2x00dev->workqueue, &rt2x00dev->sleep_work);
}
static int rt2x00lib_rxdone_read_signal(struct rt2x00_dev *rt2x00dev,
INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled);
INIT_DELAYED_WORK(&rt2x00dev->autowakeup_work, rt2x00lib_autowakeup);
+ INIT_WORK(&rt2x00dev->sleep_work, rt2x00lib_sleep);
/*
* Let the driver probe the device to detect the capabilities.
*/
cancel_work_sync(&rt2x00dev->intf_work);
cancel_delayed_work_sync(&rt2x00dev->autowakeup_work);
+ cancel_work_sync(&rt2x00dev->sleep_work);
if (rt2x00_is_usb(rt2x00dev)) {
del_timer_sync(&rt2x00dev->txstatus_timer);
cancel_work_sync(&rt2x00dev->rxdone_work);
#include <linux/delay.h>
#include <linux/etherdevice.h>
#include <linux/eeprom_93cx6.h>
+#include <linux/module.h>
#include <net/mac80211.h>
#include "rtl8180.h"
#include <linux/delay.h>
#include <linux/etherdevice.h>
#include <linux/eeprom_93cx6.h>
+#include <linux/module.h>
#include <net/mac80211.h>
#include "rtl8187.h"
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/ip.h>
+#include <linux/module.h>
#include "wifi.h"
#include "rc.h"
#include "base.h"
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <linux/export.h>
#include "wifi.h"
#include "cam.h"
*
*****************************************************************************/
+#include <linux/export.h>
#include "wifi.h"
#include "efuse.h"
*
*****************************************************************************/
+#include <linux/export.h>
#include "core.h"
#include "wifi.h"
#include "pci.h"
*
*****************************************************************************/
+#include <linux/export.h>
#include "wifi.h"
#include "base.h"
#include "ps.h"
*
*****************************************************************************/
+#include <linux/export.h>
#include "dm_common.h"
#include "phy_common.h"
#include "../pci.h"
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/firmware.h>
+#include <linux/export.h>
#include "../wifi.h"
#include "../pci.h"
#include "../base.h"
*
*****************************************************************************/
+#include <linux/module.h>
#include "../wifi.h"
*
*****************************************************************************/
+#include <linux/export.h>
#include "../wifi.h"
#include "../rtl8192ce/reg.h"
#include "../rtl8192ce/def.h"
*****************************************************************************/
#include <linux/vmalloc.h>
+#include <linux/module.h>
#include "../wifi.h"
#include "../core.h"
#include "led.h"
#include "hw.h"
#include <linux/vmalloc.h>
+#include <linux/module.h>
MODULE_AUTHOR("Georgia <georgia@realtek.com>");
MODULE_AUTHOR("Ziv Huang <ziv_huang@realtek.com>");
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/vmalloc.h>
+#include <linux/module.h>
#include "../wifi.h"
#include "../core.h"
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/vmalloc.h>
+#include <linux/module.h>
#include "../wifi.h"
#include "../core.h"
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/usb.h>
+#include <linux/export.h>
#include "core.h"
#include "wifi.h"
#include "usb.h"
#include <linux/slab.h>
#include <linux/wl12xx.h>
+#include <linux/export.h>
#include "acx.h"
#include "reg.h"
break;
}
/* Fail if SSID isn't present in the filters */
- if (j == req->n_ssids) {
+ if (j == cmd->n_ssids) {
ret = -EINVAL;
goto out_free;
}
#include <linux/skbuff.h>
#include <linux/usb.h>
#include <linux/workqueue.h>
+#include <linux/module.h>
#include <net/mac80211.h>
#include <asm/unaligned.h>
u8 fe_dev_addr[6];
/* Physical parameters of the comms window. */
- grant_handle_t tx_shmem_handle;
- grant_ref_t tx_shmem_ref;
- grant_handle_t rx_shmem_handle;
- grant_ref_t rx_shmem_ref;
unsigned int irq;
/* List of frontends to notify after a batch of frames sent. */
/* The shared rings and indexes. */
struct xen_netif_tx_back_ring tx;
struct xen_netif_rx_back_ring rx;
- struct vm_struct *tx_comms_area;
- struct vm_struct *rx_comms_area;
/* Frontend feature information. */
u8 can_sg:1;
wait_queue_head_t waiting_to_free;
};
+static inline struct xenbus_device *xenvif_to_xenbus_device(struct xenvif *vif)
+{
+ return to_xenbus_device(vif->dev->dev.parent);
+}
+
#define XEN_NETIF_TX_RING_SIZE __CONST_RING_SIZE(xen_netif_tx, PAGE_SIZE)
#define XEN_NETIF_RX_RING_SIZE __CONST_RING_SIZE(xen_netif_rx, PAGE_SIZE)
void xen_netbk_unmap_frontend_rings(struct xenvif *vif)
{
- struct gnttab_unmap_grant_ref op;
-
- if (vif->tx.sring) {
- gnttab_set_unmap_op(&op, (unsigned long)vif->tx_comms_area->addr,
- GNTMAP_host_map, vif->tx_shmem_handle);
-
- if (HYPERVISOR_grant_table_op(GNTTABOP_unmap_grant_ref, &op, 1))
- BUG();
- }
-
- if (vif->rx.sring) {
- gnttab_set_unmap_op(&op, (unsigned long)vif->rx_comms_area->addr,
- GNTMAP_host_map, vif->rx_shmem_handle);
-
- if (HYPERVISOR_grant_table_op(GNTTABOP_unmap_grant_ref, &op, 1))
- BUG();
- }
- if (vif->rx_comms_area)
- free_vm_area(vif->rx_comms_area);
- if (vif->tx_comms_area)
- free_vm_area(vif->tx_comms_area);
+ if (vif->tx.sring)
+ xenbus_unmap_ring_vfree(xenvif_to_xenbus_device(vif),
+ vif->tx.sring);
+ if (vif->rx.sring)
+ xenbus_unmap_ring_vfree(xenvif_to_xenbus_device(vif),
+ vif->rx.sring);
}
int xen_netbk_map_frontend_rings(struct xenvif *vif,
grant_ref_t tx_ring_ref,
grant_ref_t rx_ring_ref)
{
- struct gnttab_map_grant_ref op;
+ void *addr;
struct xen_netif_tx_sring *txs;
struct xen_netif_rx_sring *rxs;
int err = -ENOMEM;
- vif->tx_comms_area = alloc_vm_area(PAGE_SIZE);
- if (vif->tx_comms_area == NULL)
+ err = xenbus_map_ring_valloc(xenvif_to_xenbus_device(vif),
+ tx_ring_ref, &addr);
+ if (err)
goto err;
- vif->rx_comms_area = alloc_vm_area(PAGE_SIZE);
- if (vif->rx_comms_area == NULL)
- goto err;
-
- gnttab_set_map_op(&op, (unsigned long)vif->tx_comms_area->addr,
- GNTMAP_host_map, tx_ring_ref, vif->domid);
-
- if (HYPERVISOR_grant_table_op(GNTTABOP_map_grant_ref, &op, 1))
- BUG();
-
- if (op.status) {
- netdev_warn(vif->dev,
- "failed to map tx ring. err=%d status=%d\n",
- err, op.status);
- err = op.status;
- goto err;
- }
-
- vif->tx_shmem_ref = tx_ring_ref;
- vif->tx_shmem_handle = op.handle;
-
- txs = (struct xen_netif_tx_sring *)vif->tx_comms_area->addr;
+ txs = (struct xen_netif_tx_sring *)addr;
BACK_RING_INIT(&vif->tx, txs, PAGE_SIZE);
- gnttab_set_map_op(&op, (unsigned long)vif->rx_comms_area->addr,
- GNTMAP_host_map, rx_ring_ref, vif->domid);
-
- if (HYPERVISOR_grant_table_op(GNTTABOP_map_grant_ref, &op, 1))
- BUG();
-
- if (op.status) {
- netdev_warn(vif->dev,
- "failed to map rx ring. err=%d status=%d\n",
- err, op.status);
- err = op.status;
+ err = xenbus_map_ring_valloc(xenvif_to_xenbus_device(vif),
+ rx_ring_ref, &addr);
+ if (err)
goto err;
- }
-
- vif->rx_shmem_ref = rx_ring_ref;
- vif->rx_shmem_handle = op.handle;
- vif->rx_req_cons_peek = 0;
- rxs = (struct xen_netif_rx_sring *)vif->rx_comms_area->addr;
+ rxs = (struct xen_netif_rx_sring *)addr;
BACK_RING_INIT(&vif->rx, rxs, PAGE_SIZE);
+ vif->rx_req_cons_peek = 0;
+
return 0;
err:
*
*/
#include <linux/platform_device.h>
+#include <linux/module.h>
#include <linux/nfc.h>
#include <net/nfc/nci.h>
#include <net/nfc/nci_core.h>
if (p != NULL && l > 0)
strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE));
+ /*
+ * CONFIG_CMDLINE is meant to be a default in case nothing else
+ * managed to set the command line, unless CONFIG_CMDLINE_FORCE
+ * is set in which case we override whatever was found earlier.
+ */
#ifdef CONFIG_CMDLINE
#ifndef CONFIG_CMDLINE_FORCE
- if (p == NULL || l == 0 || (l == 1 && (*p) == 0))
+ if (!((char *)data)[0])
#endif
strlcpy(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
#endif /* CONFIG_CMDLINE */
#include <linux/kernel.h>
#include <linux/of_net.h>
#include <linux/phy.h>
+#include <linux/export.h>
/**
* It maps 'enum phy_interface_t' found in include/linux/phy.h
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/of.h>
#include <linux/of_pci.h>
#include <asm/prom.h>
#include <linux/kernel.h>
#include <linux/of_pci.h>
#include <linux/of_irq.h>
+#include <linux/export.h>
#include <asm/prom.h>
/**
* tree.
*/
+#include <linux/module.h>
#include <linux/of.h>
#include <linux/device.h>
#include <linux/spi/spi.h>
#include <linux/seq_file.h>
#include <linux/scatterlist.h>
#include <linux/iommu-helper.h>
+#include <linux/export.h>
#include <asm/byteorder.h>
#include <asm/cache.h> /* for L1_CACHE_BYTES */
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
+#include <linux/module.h>
#include <asm/ropes.h>
#include <asm/mckinley.h> /* for proc_mckinley_root */
The PCI device frontend driver allows the kernel to import arbitrary
PCI devices from a PCI backend to support PCI driver domains.
-config XEN_PCIDEV_FE_DEBUG
- bool "Xen PCI Frontend debugging"
- depends on XEN_PCIDEV_FRONTEND && PCI_DEBUG
- help
- Say Y here if you want the Xen PCI frontend to produce a bunch of debug
- messages to the system log. Select this if you are having a
- problem with Xen PCI frontend support and want to see more of what is
- going on.
-
- When in doubt, say N.
-
config HT_IRQ
bool "Interrupts on hypertransport devices"
default y
* PASID support added by Joerg Roedel <joerg.roedel@amd.com>
*/
+#include <linux/export.h>
#include <linux/pci-ats.h>
#include <linux/pci.h>
/* Core PCI functionality used only by PCI hotplug */
#include <linux/pci.h>
+#include <linux/export.h>
#include "pci.h"
#include <linux/pci.h>
#include <linux/pci_hotplug.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include "pciehp.h"
#define PCIEHP_DETECT_PCIE (0)
*/
#include <linux/pci.h>
+#include <linux/export.h>
#include <linux/pci_hotplug.h>
static struct hpp_type0 pci_default_type0 = {
#undef DEBUG
#include <linux/init.h>
+#include <linux/module.h>
#include <linux/pci.h>
#include <linux/string.h>
#include <linux/vmalloc.h>
#include <linux/irq.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <linux/htirq.h>
*/
#include <linux/pci.h>
+#include <linux/export.h>
#include <linux/acpi.h>
#include <linux/slab.h>
#include <acpi/acpi_bus.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/mutex.h>
+#include <linux/export.h>
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/pci-ats.h>
#include <linux/acpi.h>
#include <linux/device.h>
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/pci.h>
static void pci_note_irq_problem(struct pci_dev *pdev, const char *reason)
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/init.h>
+#include <linux/export.h>
#include <linux/ioport.h>
#include <linux/pci.h>
#include <linux/proc_fs.h>
#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/stat.h>
+#include <linux/export.h>
#include <linux/topology.h>
#include <linux/mm.h>
#include <linux/fs.h>
#include <linux/types.h>
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/delay.h>
* PCI ROM access routines
*/
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/pci.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/kobject.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <linux/pci.h>
#include <linux/err.h>
#include "pci.h"
*/
#include <linux/pci.h>
+#include <linux/export.h>
int pci_vpd_find_tag(const u8 *buf, unsigned int off, unsigned int len, u8 rdt)
{
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/pm.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/resource.h>
#include <linux/slab.h>
__raw_writel(mecr, MECR);
}
+EXPORT_SYMBOL(pxa2xx_configure_sockets);
static const char *skt_names[] = {
"PCMCIA socket 0",
#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/export.h>
#include <asm/mach-types.h>
#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/export.h>
#include <asm/mach-types.h>
#include <linux/module.h>
-#include <asm/system.h>
#include <asm/mach-types.h>
-#include <mach/system.h>
+#include <mach/hardware.h>
int cmx255_pcmcia_init(void);
int cmx270_pcmcia_init(void);
# PINCTRL infrastructure and drivers
#
-menuconfig PINCTRL
- bool "PINCTRL Support"
+config PINCTRL
+ bool
depends on EXPERIMENTAL
- help
- This enables the PINCTRL subsystem for controlling pins
- on chip packages, for example multiplexing pins on primarily
- PGA and BGA packages for systems on chip.
-
- If unsure, say N.
if PINCTRL
+menu "Pin controllers"
+ depends on PINCTRL
+
config PINMUX
bool "Support pinmux controllers"
- help
- Say Y here if you want the pincontrol subsystem to handle pin
- multiplexing drivers.
config DEBUG_PINCTRL
bool "Debug PINCTRL calls"
bool "CSR SiRFprimaII pinmux driver"
depends on ARCH_PRIMA2
select PINMUX
- help
- Say Y here to enable the SiRFprimaII pinmux driver
config PINMUX_U300
bool "U300 pinmux driver"
depends on ARCH_U300
select PINMUX
- help
- Say Y here to enable the U300 pinmux driver
+
+endmenu
endif
#define pr_fmt(fmt) "pinctrl core: " fmt
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/slab.h>
depends on EXPERIMENTAL
depends on BACKLIGHT_CLASS_DEVICE
depends on RFKILL || RFKILL = n
- depends on POWER_SUPPLY
depends on SERIO_I8042
+ select POWER_SUPPLY
+ select LEDS_CLASS
+ select NEW_LEDS
default n
---help---
This driver adds support for rfkill and backlight control to Dell
.update_status = dell_send_intensity,
};
-static void touchpad_led_on()
+static void touchpad_led_on(void)
{
int command = 0x97;
char data = 1;
i8042_command(&data, command | 1 << 12);
}
-static void touchpad_led_off()
+static void touchpad_led_off(void)
{
int command = 0x97;
char data = 2;
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/sfi.h>
+#include <linux/module.h>
#include <asm/mrst.h>
#include <asm/intel_scu_ipc.h>
#include <linux/acpi.h>
#include <linux/backlight.h>
#include <linux/slab.h>
+#include <linux/module.h>
MODULE_AUTHOR("Thomas Renninger <trenn@suse.de>");
MODULE_DESCRIPTION("MSI laptop WMI hotkeys driver");
#include <linux/list.h>
#include <linux/acpi.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/export.h>
#include <linux/acpi.h>
#include <linux/pnp.h>
#include <linux/slab.h>
struct acpi_resource_dma *p)
{
int i;
- unsigned char map = 0, flags = 0;
-
- if (p->channel_count == 0)
- flags |= IORESOURCE_DISABLED;
+ unsigned char map = 0, flags;
for (i = 0; i < p->channel_count; i++)
map |= 1 << p->channels[i];
- flags |= dma_flags(dev, p->type, p->bus_master, p->transfer);
+ flags = dma_flags(dev, p->type, p->bus_master, p->transfer);
pnp_register_dma_resource(dev, option_flags, map, flags);
}
{
int i;
pnp_irq_mask_t map;
- unsigned char flags = 0;
-
- if (p->interrupt_count == 0)
- flags |= IORESOURCE_DISABLED;
+ unsigned char flags;
bitmap_zero(map.bits, PNP_IRQ_NR);
for (i = 0; i < p->interrupt_count; i++)
if (p->interrupts[i])
__set_bit(p->interrupts[i], map.bits);
- flags |= irq_flags(p->triggering, p->polarity, p->sharable);
+ flags = irq_flags(p->triggering, p->polarity, p->sharable);
pnp_register_irq_resource(dev, option_flags, &map, flags);
}
{
int i;
pnp_irq_mask_t map;
- unsigned char flags = 0;
-
- if (p->interrupt_count == 0)
- flags |= IORESOURCE_DISABLED;
+ unsigned char flags;
bitmap_zero(map.bits, PNP_IRQ_NR);
for (i = 0; i < p->interrupt_count; i++) {
}
}
- flags |= irq_flags(p->triggering, p->polarity, p->sharable);
+ flags = irq_flags(p->triggering, p->polarity, p->sharable);
pnp_register_irq_resource(dev, option_flags, &map, flags);
}
{
unsigned char flags = 0;
- if (io->address_length == 0)
- flags |= IORESOURCE_DISABLED;
-
if (io->io_decode == ACPI_DECODE_16)
- flags |= IORESOURCE_IO_16BIT_ADDR;
+ flags = IORESOURCE_IO_16BIT_ADDR;
pnp_register_port_resource(dev, option_flags, io->minimum, io->maximum,
io->alignment, io->address_length, flags);
}
unsigned int option_flags,
struct acpi_resource_fixed_io *io)
{
- unsigned char flags = 0;
-
- if (io->address_length == 0)
- flags |= IORESOURCE_DISABLED;
-
pnp_register_port_resource(dev, option_flags, io->address, io->address,
- 0, io->address_length, flags | IORESOURCE_IO_FIXED);
+ 0, io->address_length, IORESOURCE_IO_FIXED);
}
static __init void pnpacpi_parse_mem24_option(struct pnp_dev *dev,
{
unsigned char flags = 0;
- if (p->address_length == 0)
- flags |= IORESOURCE_DISABLED;
-
if (p->write_protect == ACPI_READ_WRITE_MEMORY)
- flags |= IORESOURCE_MEM_WRITEABLE;
+ flags = IORESOURCE_MEM_WRITEABLE;
pnp_register_mem_resource(dev, option_flags, p->minimum, p->maximum,
p->alignment, p->address_length, flags);
}
{
unsigned char flags = 0;
- if (p->address_length == 0)
- flags |= IORESOURCE_DISABLED;
-
if (p->write_protect == ACPI_READ_WRITE_MEMORY)
- flags |= IORESOURCE_MEM_WRITEABLE;
+ flags = IORESOURCE_MEM_WRITEABLE;
pnp_register_mem_resource(dev, option_flags, p->minimum, p->maximum,
p->alignment, p->address_length, flags);
}
{
unsigned char flags = 0;
- if (p->address_length == 0)
- flags |= IORESOURCE_DISABLED;
-
if (p->write_protect == ACPI_READ_WRITE_MEMORY)
- flags |= IORESOURCE_MEM_WRITEABLE;
+ flags = IORESOURCE_MEM_WRITEABLE;
pnp_register_mem_resource(dev, option_flags, p->address, p->address,
0, p->address_length, flags);
}
return;
}
- if (p->address_length == 0)
- flags |= IORESOURCE_DISABLED;
-
if (p->resource_type == ACPI_MEMORY_RANGE) {
if (p->info.mem.write_protect == ACPI_READ_WRITE_MEMORY)
- flags |= IORESOURCE_MEM_WRITEABLE;
+ flags = IORESOURCE_MEM_WRITEABLE;
pnp_register_mem_resource(dev, option_flags, p->minimum,
p->minimum, 0, p->address_length,
flags);
} else if (p->resource_type == ACPI_IO_RANGE)
pnp_register_port_resource(dev, option_flags, p->minimum,
p->minimum, 0, p->address_length,
- flags | IORESOURCE_IO_FIXED);
+ IORESOURCE_IO_FIXED);
}
static __init void pnpacpi_parse_ext_address_option(struct pnp_dev *dev,
struct acpi_resource_extended_address64 *p = &r->data.ext_address64;
unsigned char flags = 0;
- if (p->address_length == 0)
- flags |= IORESOURCE_DISABLED;
-
if (p->resource_type == ACPI_MEMORY_RANGE) {
if (p->info.mem.write_protect == ACPI_READ_WRITE_MEMORY)
- flags |= IORESOURCE_MEM_WRITEABLE;
+ flags = IORESOURCE_MEM_WRITEABLE;
pnp_register_mem_resource(dev, option_flags, p->minimum,
p->minimum, 0, p->address_length,
flags);
} else if (p->resource_type == ACPI_IO_RANGE)
pnp_register_port_resource(dev, option_flags, p->minimum,
p->minimum, 0, p->address_length,
- flags | IORESOURCE_IO_FIXED);
+ IORESOURCE_IO_FIXED);
}
struct acpipnp_parse_option_s {
*/
#include <linux/init.h>
+#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/mod_devicetable.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <linux/slab.h>
#include <linux/power_supply.h>
#include <linux/platform_device.h>
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/module.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/slab.h>
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/module.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/ctype.h>
#include <linux/power_supply.h>
#include <linux/slab.h>
+#include <linux/stat.h>
#include "power_supply.h"
}
result = request_irq(vuart_bus_priv.virq, ps3_vuart_irq_handler,
- IRQF_DISABLED, "vuart", &vuart_bus_priv);
+ 0, "vuart", &vuart_bus_priv);
if (result) {
pr_debug("%s:%d: request_irq failed (%d)\n",
*/
#include <linux/dma-mapping.h>
+#include <linux/module.h>
#include <asm/lv1call.h>
#include <asm/ps3stor.h>
goto fail_close_device;
}
- error = request_irq(dev->irq, handler, IRQF_DISABLED,
+ error = request_irq(dev->irq, handler, 0,
dev->sbd.core.driver->name, dev);
if (error) {
dev_err(&dev->sbd.core, "%s:%u: request_irq failed %d\n",
*/
#include <linux/kernel.h>
+#include <linux/export.h>
#include <asm/lv1call.h>
#include <asm/ps3.h>
* option) any later version.
*/
+#include <linux/stat.h>
#include <linux/rio.h>
#include <linux/rio_drv.h>
#include <linux/rio_ids.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/mfd/88pm860x.h>
+#include <linux/module.h>
struct pm8607_regulator_info {
struct regulator_desc desc;
*/
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/mfd/ab8500.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/err.h>
+#include <linux/module.h>
#include <linux/gpio.h>
#include <linux/regulator/bq24022.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/consumer.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
+#include <linux/module.h>
#define CREATE_TRACE_POINTS
#include <trace/events/regulator.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/err.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/db8500-prcmu.h>
+#include <linux/module.h>
/*
* power state reference count
*/
#include <linux/err.h>
+#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/err.h>
#include <linux/mutex.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/fixed.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/lp3971.h>
#include <linux/slab.h>
#include <linux/bug.h>
#include <linux/err.h>
#include <linux/i2c.h>
+#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/lp3972.h>
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/err.h>
+#include <linux/module.h>
#include "mc13xxx.h"
#define MC13783_REG_SWITCHERS5 29
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/err.h>
+#include <linux/module.h>
#include "mc13xxx.h"
#define MC13892_REVISION 7
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/err.h>
+#include <linux/module.h>
#include "mc13xxx.h"
static int mc13xxx_regulator_enable(struct regulator_dev *rdev)
*/
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/mutex.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/regulator/userspace-consumer.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
+#include <linux/module.h>
struct virtual_consumer_data {
struct mutex lock;
#include <linux/bug.h>
#include <linux/err.h>
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/regulator/driver.h>
#include <linux/mfd/wm8400-private.h>
#include <linux/rtc.h>
#include <linux/sched.h>
+#include <linux/module.h>
#include <linux/log2.h>
#include <linux/workqueue.h>
#include <linux/platform_device.h>
#include <linux/i2c/dm355evm_msp.h>
+#include <linux/module.h>
/*
#include <linux/spi/spi.h>
#include <linux/spi/ds1305.h>
+#include <linux/module.h>
/*
#include <linux/rtc.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/module.h>
#define DRV_VERSION "0.6"
#include <linux/rtc.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/module.h>
#define DRV_VERSION "0.3"
#include <linux/i2c.h>
#include <linux/rtc.h>
+#include <linux/module.h>
#define DRV_VERSION "0.4"
#include <linux/rtc.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/module.h>
#define DRV_VERSION "0.4"
#include <linux/i2c.h>
#include <linux/rtc.h>
#include <linux/bcd.h>
+#include <linux/module.h>
/* Registers */
#define EM3027_REG_ON_OFF_CTRL 0x00
#include <linux/bcd.h>
#include <linux/rtc.h>
#include <linux/slab.h>
+#include <linux/module.h>
#define DRV_VERSION "0.1"
/*
* rtc_time's year contains the increment over 1900, but vRTC's YEAR
* register can't be programmed to value larger than 0x64, so vRTC
- * driver chose to use 1960 (1970 is UNIX time start point) as the base,
+ * driver chose to use 1972 (1970 is UNIX time start point) as the base,
* and does the translation at read/write time.
*
- * Why not just use 1970 as the offset? it's because using 1960 will
+ * Why not just use 1970 as the offset? it's because using 1972 will
* make it consistent in leap year setting for both vrtc and low-level
- * physical rtc devices.
+ * physical rtc devices. Then why not use 1960 as the offset? If we use
+ * 1960, for a device's first use, its YEAR register is 0 and the system
+ * year will be parsed as 1960 which is not a valid UNIX time and will
+ * cause many applications to fail mysteriously.
*/
static int mrst_read_time(struct device *dev, struct rtc_time *time)
{
time->tm_year = vrtc_cmos_read(RTC_YEAR);
spin_unlock_irqrestore(&rtc_lock, flags);
- /* Adjust for the 1960/1900 */
- time->tm_year += 60;
+ /* Adjust for the 1972/1900 */
+ time->tm_year += 72;
time->tm_mon--;
- return RTC_24H;
+ return rtc_valid_tm(time);
}
static int mrst_set_time(struct device *dev, struct rtc_time *time)
min = time->tm_min;
sec = time->tm_sec;
- if (yrs < 70 || yrs > 138)
+ if (yrs < 72 || yrs > 138)
return -EINVAL;
- yrs -= 60;
+ yrs -= 72;
spin_lock_irqsave(&rtc_lock, flags);
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/gfp.h>
+#include <linux/module.h>
#define RTC_TIME_REG_OFFS 0
#include <linux/slab.h>
#include <linux/rtc.h>
#include <linux/spi/spi.h>
+#include <linux/module.h>
#define DRV_VERSION "0.6"
#include <linux/bcd.h>
#include <linux/rtc.h>
#include <linux/slab.h>
+#include <linux/module.h>
#define DRV_VERSION "0.4.3"
}
}
-static int puv3_rtc_remove(struct platform_device *dev)
+static int __devexit puv3_rtc_remove(struct platform_device *dev)
{
struct rtc_device *rtc = platform_get_drvdata(dev);
return 0;
}
-static int puv3_rtc_probe(struct platform_device *pdev)
+static int __devinit puv3_rtc_probe(struct platform_device *pdev)
{
struct rtc_device *rtc;
struct resource *res;
#include <linux/rtc.h>
#include <linux/workqueue.h>
#include <linux/spi/spi.h>
+#include <linux/module.h>
#define DRV_VERSION "0.2"
#include <linux/rtc.h>
#include <linux/bcd.h>
#include <linux/slab.h>
+#include <linux/module.h>
#define DRV_VERSION "0.6"
#include <linux/rtc.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/module.h>
#define DRV_VERSION "0.1"
#include <linux/rtc.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <linux/io.h>
#include <linux/gfp.h>
#include <asm/txx9/tx4939.h>
#include <linux/bcd.h>
#include <linux/rtc.h>
#include <linux/delay.h>
+#include <linux/module.h>
#define DRV_VERSION "1.0.8"
#include <linux/console.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <linux/list.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/completion.h>
+#include <linux/export.h>
#include <asm/ebcdic.h>
#include <asm/sclp.h>
#include <linux/kernel.h>
#include <linux/miscdevice.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <asm/compat.h>
#include <asm/cpcmd.h>
#include <asm/debug.h>
#include <linux/cdev.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <asm/uaccess.h>
#include <asm/cio.h>
if (ipl_info.type != IPL_TYPE_FCP_DUMP)
return -ENODATA;
+ if (OLDMEM_BASE)
+ return -ENODATA;
zcore_dbf = debug_register("zcore", 4, 1, 4 * sizeof(long));
debug_register_view(zcore_dbf, &debug_sprintf_view);
#include <linux/bug.h>
#include <linux/workqueue.h>
#include <linux/spinlock.h>
+#include <linux/export.h>
+#include <linux/sched.h>
#include <linux/init.h>
#include <linux/jiffies.h>
#include <linux/wait.h>
*/
#include <linux/seq_file.h>
#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+#include <linux/export.h>
#include <asm/debug.h>
#include "qdio_debug.h"
#include "qdio.h"
*/
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <asm/qdio.h>
#include "cio.h"
}
/**
- * ap_schedule_poll_timer(): Schedule poll timer.
+ * __ap_schedule_poll_timer(): Schedule poll timer.
*
* Set up the timer to run the poll tasklet
*/
-static inline void ap_schedule_poll_timer(void)
+static inline void __ap_schedule_poll_timer(void)
{
ktime_t hr_time;
spin_lock_bh(&ap_poll_timer_lock);
- if (ap_using_interrupts() || ap_suspend_flag)
- goto out;
- if (hrtimer_is_queued(&ap_poll_timer))
+ if (hrtimer_is_queued(&ap_poll_timer) || ap_suspend_flag)
goto out;
if (ktime_to_ns(hrtimer_expires_remaining(&ap_poll_timer)) <= 0) {
hr_time = ktime_set(0, poll_timeout);
spin_unlock_bh(&ap_poll_timer_lock);
}
+/**
+ * ap_schedule_poll_timer(): Schedule poll timer.
+ *
+ * Set up the timer to run the poll tasklet
+ */
+static inline void ap_schedule_poll_timer(void)
+{
+ if (ap_using_interrupts())
+ return;
+ __ap_schedule_poll_timer();
+}
+
/**
* ap_poll_read(): Receive pending reply messages from an AP device.
* @ap_dev: pointer to the AP device
*flags |= 1;
*flags |= 2;
break;
- case AP_RESPONSE_Q_FULL:
case AP_RESPONSE_RESET_IN_PROGRESS:
+ __ap_schedule_poll_timer();
+ case AP_RESPONSE_Q_FULL:
*flags |= 2;
break;
case AP_RESPONSE_MESSAGE_TOO_BIG:
#include <linux/virtio_console.h>
#include <linux/interrupt.h>
#include <linux/virtio_ring.h>
+#include <linux/export.h>
#include <linux/pfn.h>
#include <asm/io.h>
#include <asm/kvm_para.h>
config LCS
def_tristate m
prompt "Lan Channel Station Interface"
- depends on CCW && NETDEVICES && (NET_ETHERNET || TR || FDDI)
+ depends on CCW && NETDEVICES && (ETHERNET || TR || FDDI)
help
Select this option if you want to use LCS networking on IBM System z.
This device driver supports Token Ring (IEEE 802.5),
#include "lcs.h"
-#if !defined(CONFIG_NET_ETHERNET) && \
+#if !defined(CONFIG_ETHERNET) && \
!defined(CONFIG_TR) && !defined(CONFIG_FDDI)
#error Cannot compile lcs.c without some net devices switched on.
#endif
int rc;
LCS_DBF_TEXT(2, trace, "strtauto");
-#ifdef CONFIG_NET_ETHERNET
+#ifdef CONFIG_ETHERNET
card->lan_type = LCS_FRAME_TYPE_ENET;
rc = lcs_send_startlan(card, LCS_INITIATOR_TCPIP);
if (rc == 0)
goto netdev_out;
}
switch (card->lan_type) {
-#ifdef CONFIG_NET_ETHERNET
+#ifdef CONFIG_ETHERNET
case LCS_FRAME_TYPE_ENET:
card->lan_type_trans = eth_type_trans;
dev = alloc_etherdev(0);
netiucv_setup_netdevice);
if (!dev)
return NULL;
+ if (dev_alloc_name(dev, dev->name) < 0)
+ goto out_netdev;
privptr = netdev_priv(dev);
privptr->fsm = init_fsm("netiucvdev", dev_state_names,
#define QETH_IN_BUF_COUNT_MAX 128
#define QETH_MAX_BUFFER_ELEMENTS(card) ((card)->qdio.in_buf_size >> 12)
#define QETH_IN_BUF_REQUEUE_THRESHOLD(card) \
- ((card)->ssqd.qdioac1 & AC1_SIGA_INPUT_NEEDED ? 1 : \
- ((card)->qdio.in_buf_pool.buf_count / 2))
+ ((card)->qdio.in_buf_pool.buf_count / 2)
/* buffers we have to be behind before we get a PCI */
#define QETH_PCI_THRESHOLD_A(card) ((card)->qdio.in_buf_pool.buf_count+1)
void qeth_schedule_recovery(struct qeth_card *card)
{
QETH_CARD_TEXT(card, 2, "startrec");
- WARN_ON(1);
if (qeth_set_thread_start_bit(card, QETH_RECOVER_THREAD) == 0)
schedule_work(&card->kernel_thread_starter);
}
struct neighbour *n = NULL;
struct dst_entry *dst;
+ rcu_read_lock();
dst = skb_dst(skb);
if (dst)
n = dst_get_neighbour(dst);
if (n) {
cast_type = n->type;
+ rcu_read_unlock();
if ((cast_type == RTN_BROADCAST) ||
(cast_type == RTN_MULTICAST) ||
(cast_type == RTN_ANYCAST))
else
return RTN_UNSPEC;
}
+ rcu_read_unlock();
+
/* try something else */
if (skb->protocol == ETH_P_IPV6)
return (skb_network_header(skb)[24] == 0xff) ?
}
hdr->hdr.l3.length = skb->len - sizeof(struct qeth_hdr);
+
+ rcu_read_lock();
dst = skb_dst(skb);
if (dst)
n = dst_get_neighbour(dst);
QETH_CAST_UNICAST | QETH_HDR_PASSTHRU;
}
}
+ rcu_read_unlock();
}
static inline void qeth_l3_hdr_csum(struct qeth_card *card,
QETH_IN_BUF_COUNT_MAX)
qeth_realloc_buffer_pool(card,
QETH_IN_BUF_COUNT_MAX);
- break;
} else
rc = -EPERM;
- default: /* fall through */
+ break;
+ default:
rc = -EINVAL;
}
out:
#include <linux/miscdevice.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include "zfcp_ext.h"
#include "zfcp_fc.h"
#include "zfcp_reqlist.h"
#define KMSG_COMPONENT "zfcp"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+#include <linux/module.h>
#include "zfcp_ext.h"
#include "zfcp_reqlist.h"
#define KMSG_COMPONENT "zfcp"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+#include <linux/module.h>
#include <linux/ctype.h>
#include <linux/slab.h>
#include <asm/debug.h>
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#include <linux/slab.h>
+#include <linux/module.h>
#include "zfcp_ext.h"
#include "zfcp_qdio.h"
#define KMSG_COMPONENT "zfcp"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+#include <linux/module.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <scsi/fc/fc_fcp.h>
To compile this driver as a module, choose M here: the
module will be called arcmsr (modprobe arcmsr).
-config SCSI_ARCMSR_AER
- bool "Enable PCI Error Recovery Capability in Areca Driver(ARCMSR)"
- depends on SCSI_ARCMSR && PCIEAER
- default n
- help
- The advanced error reporting(AER) capability is "NOT" provided by
- ARC1200/1201/1202 SATA RAID controllers cards.
- If your card is one of ARC1200/1201/1202, please use the default setting, n.
- If your card is other models, you could pick it
- on condition that the kernel version is greater than 2.6.19.
- This function is maintained driver by Nick Cheng. If you have any
- problems or suggestion, you are welcome to contact with <nick.cheng@areca.com.tw>.
- To enable this function, choose Y here.
-
source "drivers/scsi/megaraid/Kconfig.megaraid"
source "drivers/scsi/mpt2sas/Kconfig"
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/zorro.h>
+#include <linux/module.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/module.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <linux/blkdev.h>
#include <asm/uaccess.h>
#include <linux/highmem.h> /* For flush_kernel_dcache_page */
+#include <linux/module.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/pci.h>
+#include <linux/pci-aspm.h>
#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/spinlock.h>
unique_id++;
}
+ pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
+ PCIE_LINK_STATE_CLKPM);
+
error = pci_enable_device(pdev);
if (error)
goto out;
#include <linux/kernel.h>
#include <linux/semaphore.h>
#include <linux/iscsi_boot_sysfs.h>
+#include <linux/module.h>
#include <scsi/libiscsi.h>
#include <scsi/scsi_transport_iscsi.h>
*/
#include <linux/debugfs.h>
+#include <linux/export.h>
#include "bfad_drv.h"
#include "bfad_im.h"
* bfad_im.c Linux driver IM module.
*/
+#include <linux/export.h>
+
#include "bfad_drv.h"
#include "bfad_im.h"
#include "bfa_fcs.h"
#include "bnx2fc_constants.h"
#define BNX2FC_NAME "bnx2fc"
-#define BNX2FC_VERSION "1.0.8"
+#define BNX2FC_VERSION "1.0.9"
#define PFX "bnx2fc: "
#define REC_RETRY_COUNT 1
#define BNX2FC_NUM_ERR_BITS 63
+#define BNX2FC_RELOGIN_WAIT_TIME 200
+#define BNX2FC_RELOGIN_WAIT_CNT 10
+
/* bnx2fc driver uses only one instance of fcoe_percpu_s */
extern struct fcoe_percpu_s bnx2fc_global;
orig_io_req = cb_arg->aborted_io_req;
srr_req = cb_arg->io_req;
- if (test_bit(BNX2FC_FLAG_IO_COMPL, &orig_io_req->req_flags)) {
- BNX2FC_IO_DBG(srr_req, "srr_compl: xid - 0x%x completed",
- orig_io_req->xid);
- goto srr_compl_done;
- }
- if (test_bit(BNX2FC_FLAG_ISSUE_ABTS, &orig_io_req->req_flags)) {
- BNX2FC_IO_DBG(srr_req, "rec abts in prog "
- "orig_io - 0x%x\n",
- orig_io_req->xid);
- goto srr_compl_done;
- }
if (test_and_clear_bit(BNX2FC_FLAG_ELS_TIMEOUT, &srr_req->req_flags)) {
/* SRR timedout */
BNX2FC_IO_DBG(srr_req, "srr timed out, abort "
"failed. issue cleanup\n");
bnx2fc_initiate_cleanup(srr_req);
}
+ if (test_bit(BNX2FC_FLAG_IO_COMPL, &orig_io_req->req_flags) ||
+ test_bit(BNX2FC_FLAG_ISSUE_ABTS, &orig_io_req->req_flags)) {
+ BNX2FC_IO_DBG(srr_req, "srr_compl:xid 0x%x flags = %lx",
+ orig_io_req->xid, orig_io_req->req_flags);
+ goto srr_compl_done;
+ }
orig_io_req->srr_retry++;
if (orig_io_req->srr_retry <= SRR_RETRY_COUNT) {
struct bnx2fc_rport *tgt = orig_io_req->tgt;
}
goto srr_compl_done;
}
+ if (test_bit(BNX2FC_FLAG_IO_COMPL, &orig_io_req->req_flags) ||
+ test_bit(BNX2FC_FLAG_ISSUE_ABTS, &orig_io_req->req_flags)) {
+ BNX2FC_IO_DBG(srr_req, "srr_compl:xid - 0x%x flags = %lx",
+ orig_io_req->xid, orig_io_req->req_flags);
+ goto srr_compl_done;
+ }
mp_req = &(srr_req->mp_req);
fc_hdr = &(mp_req->resp_fc_hdr);
resp_len = mp_req->resp_len;
#define DRV_MODULE_NAME "bnx2fc"
#define DRV_MODULE_VERSION BNX2FC_VERSION
-#define DRV_MODULE_RELDATE "Oct 02, 2011"
+#define DRV_MODULE_RELDATE "Oct 21, 2011"
static char version[] __devinitdata =
struct fc_rport_libfc_priv *rp = rport->dd_data;
struct bnx2fc_cmd *io_req;
struct fc_lport *lport;
+ struct fc_rport_priv *rdata;
struct bnx2fc_rport *tgt;
+ int logo_issued;
+ int wait_cnt = 0;
int rc = FAILED;
} else {
printk(KERN_ERR PFX "eh_abort: io_req (xid = 0x%x) "
"already in abts processing\n", io_req->xid);
+ if (cancel_delayed_work(&io_req->timeout_work))
+ kref_put(&io_req->refcount,
+ bnx2fc_cmd_release); /* drop timer hold */
+ bnx2fc_initiate_cleanup(io_req);
+
+ spin_unlock_bh(&tgt->tgt_lock);
+
+ wait_for_completion(&io_req->tm_done);
+
+ spin_lock_bh(&tgt->tgt_lock);
+ io_req->wait_for_comp = 0;
+ rdata = io_req->tgt->rdata;
+ logo_issued = test_and_set_bit(BNX2FC_FLAG_EXPL_LOGO,
+ &tgt->flags);
kref_put(&io_req->refcount, bnx2fc_cmd_release);
spin_unlock_bh(&tgt->tgt_lock);
+
+ if (!logo_issued) {
+ BNX2FC_IO_DBG(io_req, "Expl logo - tgt flags = 0x%lx\n",
+ tgt->flags);
+ mutex_lock(&lport->disc.disc_mutex);
+ lport->tt.rport_logoff(rdata);
+ mutex_unlock(&lport->disc.disc_mutex);
+ do {
+ msleep(BNX2FC_RELOGIN_WAIT_TIME);
+ /*
+ * If session not recovered, let SCSI-ml
+ * escalate error recovery.
+ */
+ if (wait_cnt++ > BNX2FC_RELOGIN_WAIT_CNT)
+ return FAILED;
+ } while (!test_bit(BNX2FC_FLAG_SESSION_READY,
+ &tgt->flags));
+ }
return SUCCESS;
}
if (rc == FAILED) {
io_req->refcount.refcount.counter, io_req->cmd_type);
bnx2fc_scsi_done(io_req, DID_ERROR);
kref_put(&io_req->refcount, bnx2fc_cmd_release);
+ if (io_req->wait_for_comp)
+ complete(&io_req->tm_done);
}
void bnx2fc_process_abts_compl(struct bnx2fc_cmd *io_req,
#include <net/dst.h>
#include <net/route.h>
#include <linux/inetdevice.h> /* ip_dev_find */
+#include <linux/module.h>
#include <net/tcp.h>
static unsigned int dbg_level;
*/
#include <linux/slab.h>
+#include <linux/module.h>
#include <scsi/scsi_dh.h>
#include "../scsi_priv.h"
spin_lock_irqsave(q->queue_lock, flags);
sdev = q->queuedata;
- if (sdev && sdev->scsi_dh_data)
+ if (!sdev) {
+ spin_unlock_irqrestore(q->queue_lock, flags);
+ err = SCSI_DH_NOSYS;
+ if (fn)
+ fn(data, err);
+ return err;
+ }
+
+ if (sdev->scsi_dh_data)
scsi_dh = sdev->scsi_dh_data->scsi_dh;
dev = get_device(&sdev->sdev_gendev);
if (!scsi_dh || !dev ||
*/
#include <linux/slab.h>
#include <linux/delay.h>
+#include <linux/module.h>
#include <scsi/scsi.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_dh.h>
int len, k, off, valid_states = 0;
unsigned char *ucp;
unsigned err;
- unsigned long expiry, interval = 1;
+ unsigned long expiry, interval = 1000;
expiry = round_jiffies_up(jiffies + ALUA_FAILOVER_TIMEOUT);
retry:
spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
sdev->scsi_dh_data = scsi_dh_data;
spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
+ sdev_printk(KERN_NOTICE, sdev, "%s: Attached\n", ALUA_DH_NAME);
return 0;
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/slab.h>
+#include <linux/module.h>
#include <scsi/scsi.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_dh.h>
*/
#include <linux/slab.h>
+#include <linux/module.h>
#include <scsi/scsi.h>
#include <scsi/scsi_dbg.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_dh.h>
#include <linux/workqueue.h>
#include <linux/slab.h>
+#include <linux/module.h>
#define RDAC_NAME "rdac"
#define RDAC_RETRY_COUNT 5
goto done;
mac = fr_cb(fp)->granted_mac;
- if (is_zero_ether_addr(mac)) {
- /* pre-FIP */
- if (fcoe_ctlr_recv_flogi(fip, lport, fp)) {
- fc_frame_free(fp);
- return;
- }
- }
- fcoe_update_src_mac(lport, mac);
+ /* pre-FIP */
+ if (is_zero_ether_addr(mac))
+ fcoe_ctlr_recv_flogi(fip, lport, fp);
+ if (!is_zero_ether_addr(mac))
+ fcoe_update_src_mac(lport, mac);
done:
fc_lport_flogi_resp(seq, fp, lport);
}
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/zorro.h>
+#include <linux/module.h>
#include <asm/page.h>
#include <asm/pgtable.h>
{
struct Scsi_Host *shost = dev_to_shost(dev);
struct device *parent = dev->parent;
+ struct request_queue *q;
scsi_proc_hostdir_rm(shost->hostt);
kthread_stop(shost->ehandler);
if (shost->work_q)
destroy_workqueue(shost->work_q);
- if (shost->uspace_req_q) {
- kfree(shost->uspace_req_q->queuedata);
- scsi_free_queue(shost->uspace_req_q);
+ q = shost->uspace_req_q;
+ if (q) {
+ kfree(q->queuedata);
+ q->queuedata = NULL;
+ scsi_free_queue(q);
}
scsi_destroy_command_freelist(shost);
#include <linux/interrupt.h>
#include <linux/types.h>
#include <linux/pci.h>
+#include <linux/pci-aspm.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/bitmap.h>
#include <linux/atomic.h>
#include <linux/kthread.h>
+#include <linux/jiffies.h>
#include "hpsa_cmd.h"
#include "hpsa.h"
static int number_of_controllers;
+static struct list_head hpsa_ctlr_list = LIST_HEAD_INIT(hpsa_ctlr_list);
+static spinlock_t lockup_detector_lock;
+static struct task_struct *hpsa_lockup_detector;
+
static irqreturn_t do_hpsa_intr_intx(int irq, void *dev_id);
static irqreturn_t do_hpsa_intr_msi(int irq, void *dev_id);
static int hpsa_ioctl(struct scsi_device *dev, int cmd, void *arg);
#endif
.sdev_attrs = hpsa_sdev_attrs,
.shost_attrs = hpsa_shost_attrs,
+ .max_sectors = 8192,
};
* assumes h->devlock is held
*/
int i, found = 0;
- DECLARE_BITMAP(lun_taken, HPSA_MAX_SCSI_DEVS_PER_HBA);
+ DECLARE_BITMAP(lun_taken, HPSA_MAX_DEVICES);
- memset(&lun_taken[0], 0, HPSA_MAX_SCSI_DEVS_PER_HBA >> 3);
+ memset(&lun_taken[0], 0, HPSA_MAX_DEVICES >> 3);
for (i = 0; i < h->ndevices; i++) {
if (h->dev[i]->bus == bus && h->dev[i]->target != -1)
set_bit(h->dev[i]->target, lun_taken);
}
- for (i = 0; i < HPSA_MAX_SCSI_DEVS_PER_HBA; i++) {
+ for (i = 0; i < HPSA_MAX_DEVICES; i++) {
if (!test_bit(i, lun_taken)) {
/* *bus = 1; */
*target = i;
unsigned char addr1[8], addr2[8];
struct hpsa_scsi_dev_t *sd;
- if (n >= HPSA_MAX_SCSI_DEVS_PER_HBA) {
+ if (n >= HPSA_MAX_DEVICES) {
dev_err(&h->pdev->dev, "too many devices, some will be "
"inaccessible.\n");
return -1;
struct hpsa_scsi_dev_t *removed[], int *nremoved)
{
/* assumes h->devlock is held */
- BUG_ON(entry < 0 || entry >= HPSA_MAX_SCSI_DEVS_PER_HBA);
+ BUG_ON(entry < 0 || entry >= HPSA_MAX_DEVICES);
removed[*nremoved] = h->dev[entry];
(*nremoved)++;
int i;
struct hpsa_scsi_dev_t *sd;
- BUG_ON(entry < 0 || entry >= HPSA_MAX_SCSI_DEVS_PER_HBA);
+ BUG_ON(entry < 0 || entry >= HPSA_MAX_DEVICES);
sd = h->dev[entry];
removed[*nremoved] = h->dev[entry];
int nadded, nremoved;
struct Scsi_Host *sh = NULL;
- added = kzalloc(sizeof(*added) * HPSA_MAX_SCSI_DEVS_PER_HBA,
- GFP_KERNEL);
- removed = kzalloc(sizeof(*removed) * HPSA_MAX_SCSI_DEVS_PER_HBA,
- GFP_KERNEL);
+ added = kzalloc(sizeof(*added) * HPSA_MAX_DEVICES, GFP_KERNEL);
+ removed = kzalloc(sizeof(*removed) * HPSA_MAX_DEVICES, GFP_KERNEL);
if (!added || !removed) {
dev_warn(&h->pdev->dev, "out of memory in "
wait_for_completion(&wait);
}
+static void hpsa_scsi_do_simple_cmd_core_if_no_lockup(struct ctlr_info *h,
+ struct CommandList *c)
+{
+ unsigned long flags;
+
+ /* If controller lockup detected, fake a hardware error. */
+ spin_lock_irqsave(&h->lock, flags);
+ if (unlikely(h->lockup_detected)) {
+ spin_unlock_irqrestore(&h->lock, flags);
+ c->err_info->CommandStatus = CMD_HARDWARE_ERR;
+ } else {
+ spin_unlock_irqrestore(&h->lock, flags);
+ hpsa_scsi_do_simple_cmd_core(h, c);
+ }
+}
+
static void hpsa_scsi_do_simple_cmd_with_retry(struct ctlr_info *h,
struct CommandList *c, int data_direction)
{
if (is_scsi_rev_5(h))
return 0; /* p1210m doesn't need to do this. */
-#define MAX_MSA2XXX_ENCLOSURES 32
if (*nmsa2xxx_enclosures >= MAX_MSA2XXX_ENCLOSURES) {
dev_warn(&h->pdev->dev, "Maximum number of MSA2XXX "
"enclosures exceeded. Check your hardware "
int raid_ctlr_position;
DECLARE_BITMAP(lunzerobits, HPSA_MAX_TARGETS_PER_CTLR);
- currentsd = kzalloc(sizeof(*currentsd) * HPSA_MAX_SCSI_DEVS_PER_HBA,
- GFP_KERNEL);
+ currentsd = kzalloc(sizeof(*currentsd) * HPSA_MAX_DEVICES, GFP_KERNEL);
physdev_list = kzalloc(reportlunsize, GFP_KERNEL);
logdev_list = kzalloc(reportlunsize, GFP_KERNEL);
tmpdevice = kzalloc(sizeof(*tmpdevice), GFP_KERNEL);
/* Allocate the per device structures */
for (i = 0; i < ndevs_to_allocate; i++) {
+ if (i >= HPSA_MAX_DEVICES) {
+ dev_warn(&h->pdev->dev, "maximum devices (%d) exceeded."
+ " %d devices ignored.\n", HPSA_MAX_DEVICES,
+ ndevs_to_allocate - HPSA_MAX_DEVICES);
+ break;
+ }
+
currentsd[i] = kzalloc(sizeof(*currentsd[i]), GFP_KERNEL);
if (!currentsd[i]) {
dev_warn(&h->pdev->dev, "out of memory at %s:%d\n",
default:
break;
}
- if (ncurrent >= HPSA_MAX_SCSI_DEVS_PER_HBA)
+ if (ncurrent >= HPSA_MAX_DEVICES)
break;
}
adjust_hpsa_scsi_table(h, hostno, currentsd, ncurrent);
}
memcpy(scsi3addr, dev->scsi3addr, sizeof(scsi3addr));
- /* Need a lock as this is being allocated from the pool */
spin_lock_irqsave(&h->lock, flags);
+ if (unlikely(h->lockup_detected)) {
+ spin_unlock_irqrestore(&h->lock, flags);
+ cmd->result = DID_ERROR << 16;
+ done(cmd);
+ return 0;
+ }
+ /* Need a lock as this is being allocated from the pool */
c = cmd_alloc(h);
spin_unlock_irqrestore(&h->lock, flags);
if (c == NULL) { /* trouble... */
c->SG[0].Len = iocommand.buf_size;
c->SG[0].Ext = 0; /* we are not chaining*/
}
- hpsa_scsi_do_simple_cmd_core(h, c);
+ hpsa_scsi_do_simple_cmd_core_if_no_lockup(h, c);
if (iocommand.buf_size > 0)
hpsa_pci_unmap(h->pdev, c, 1, PCI_DMA_BIDIRECTIONAL);
check_ioctl_unit_attention(h, c);
c->SG[i].Ext = 0;
}
}
- hpsa_scsi_do_simple_cmd_core(h, c);
+ hpsa_scsi_do_simple_cmd_core_if_no_lockup(h, c);
if (sg_used)
hpsa_pci_unmap(h->pdev, c, sg_used, PCI_DMA_BIDIRECTIONAL);
check_ioctl_unit_attention(h, c);
c->Request.Timeout = 0;
c->Request.CDB[0] = BMIC_WRITE;
c->Request.CDB[6] = BMIC_CACHE_FLUSH;
+ c->Request.CDB[7] = (size >> 8) & 0xFF;
+ c->Request.CDB[8] = size & 0xFF;
break;
case TEST_UNIT_READY:
c->Request.CDBLen = 6;
if (interrupt_not_for_us(h))
return IRQ_NONE;
spin_lock_irqsave(&h->lock, flags);
+ h->last_intr_timestamp = get_jiffies_64();
while (interrupt_pending(h)) {
raw_tag = get_next_completion(h);
while (raw_tag != FIFO_EMPTY)
return IRQ_NONE;
spin_lock_irqsave(&h->lock, flags);
+ h->last_intr_timestamp = get_jiffies_64();
raw_tag = get_next_completion(h);
while (raw_tag != FIFO_EMPTY)
raw_tag = next_command(h);
if (interrupt_not_for_us(h))
return IRQ_NONE;
spin_lock_irqsave(&h->lock, flags);
+ h->last_intr_timestamp = get_jiffies_64();
while (interrupt_pending(h)) {
raw_tag = get_next_completion(h);
while (raw_tag != FIFO_EMPTY) {
u32 raw_tag;
spin_lock_irqsave(&h->lock, flags);
+ h->last_intr_timestamp = get_jiffies_64();
raw_tag = get_next_completion(h);
while (raw_tag != FIFO_EMPTY) {
if (hpsa_tag_contains_index(raw_tag))
dev_warn(&h->pdev->dev, "controller appears to be disabled\n");
return -ENODEV;
}
+
+ pci_disable_link_state(h->pdev, PCIE_LINK_STATE_L0S |
+ PCIE_LINK_STATE_L1 | PCIE_LINK_STATE_CLKPM);
+
err = pci_enable_device(h->pdev);
if (err) {
dev_warn(&h->pdev->dev, "unable to enable PCI device\n");
kfree(h);
}
+static void remove_ctlr_from_lockup_detector_list(struct ctlr_info *h)
+{
+ assert_spin_locked(&lockup_detector_lock);
+ if (!hpsa_lockup_detector)
+ return;
+ if (h->lockup_detected)
+ return; /* already stopped the lockup detector */
+ list_del(&h->lockup_list);
+}
+
+/* Called when controller lockup detected. */
+static void fail_all_cmds_on_list(struct ctlr_info *h, struct list_head *list)
+{
+ struct CommandList *c = NULL;
+
+ assert_spin_locked(&h->lock);
+ /* Mark all outstanding commands as failed and complete them. */
+ while (!list_empty(list)) {
+ c = list_entry(list->next, struct CommandList, list);
+ c->err_info->CommandStatus = CMD_HARDWARE_ERR;
+ finish_cmd(c, c->Header.Tag.lower);
+ }
+}
+
+static void controller_lockup_detected(struct ctlr_info *h)
+{
+ unsigned long flags;
+
+ assert_spin_locked(&lockup_detector_lock);
+ remove_ctlr_from_lockup_detector_list(h);
+ h->access.set_intr_mask(h, HPSA_INTR_OFF);
+ spin_lock_irqsave(&h->lock, flags);
+ h->lockup_detected = readl(h->vaddr + SA5_SCRATCHPAD_OFFSET);
+ spin_unlock_irqrestore(&h->lock, flags);
+ dev_warn(&h->pdev->dev, "Controller lockup detected: 0x%08x\n",
+ h->lockup_detected);
+ pci_disable_device(h->pdev);
+ spin_lock_irqsave(&h->lock, flags);
+ fail_all_cmds_on_list(h, &h->cmpQ);
+ fail_all_cmds_on_list(h, &h->reqQ);
+ spin_unlock_irqrestore(&h->lock, flags);
+}
+
+#define HEARTBEAT_SAMPLE_INTERVAL (10 * HZ)
+#define HEARTBEAT_CHECK_MINIMUM_INTERVAL (HEARTBEAT_SAMPLE_INTERVAL / 2)
+
+static void detect_controller_lockup(struct ctlr_info *h)
+{
+ u64 now;
+ u32 heartbeat;
+ unsigned long flags;
+
+ assert_spin_locked(&lockup_detector_lock);
+ now = get_jiffies_64();
+ /* If we've received an interrupt recently, we're ok. */
+ if (time_after64(h->last_intr_timestamp +
+ (HEARTBEAT_CHECK_MINIMUM_INTERVAL), now))
+ return;
+
+ /*
+ * If we've already checked the heartbeat recently, we're ok.
+ * This could happen if someone sends us a signal. We
+ * otherwise don't care about signals in this thread.
+ */
+ if (time_after64(h->last_heartbeat_timestamp +
+ (HEARTBEAT_CHECK_MINIMUM_INTERVAL), now))
+ return;
+
+ /* If heartbeat has not changed since we last looked, we're not ok. */
+ spin_lock_irqsave(&h->lock, flags);
+ heartbeat = readl(&h->cfgtable->HeartBeat);
+ spin_unlock_irqrestore(&h->lock, flags);
+ if (h->last_heartbeat == heartbeat) {
+ controller_lockup_detected(h);
+ return;
+ }
+
+ /* We're ok. */
+ h->last_heartbeat = heartbeat;
+ h->last_heartbeat_timestamp = now;
+}
+
+static int detect_controller_lockup_thread(void *notused)
+{
+ struct ctlr_info *h;
+ unsigned long flags;
+
+ while (1) {
+ struct list_head *this, *tmp;
+
+ schedule_timeout_interruptible(HEARTBEAT_SAMPLE_INTERVAL);
+ if (kthread_should_stop())
+ break;
+ spin_lock_irqsave(&lockup_detector_lock, flags);
+ list_for_each_safe(this, tmp, &hpsa_ctlr_list) {
+ h = list_entry(this, struct ctlr_info, lockup_list);
+ detect_controller_lockup(h);
+ }
+ spin_unlock_irqrestore(&lockup_detector_lock, flags);
+ }
+ return 0;
+}
+
+static void add_ctlr_to_lockup_detector_list(struct ctlr_info *h)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&lockup_detector_lock, flags);
+ list_add_tail(&h->lockup_list, &hpsa_ctlr_list);
+ spin_unlock_irqrestore(&lockup_detector_lock, flags);
+}
+
+static void start_controller_lockup_detector(struct ctlr_info *h)
+{
+ /* Start the lockup detector thread if not already started */
+ if (!hpsa_lockup_detector) {
+ spin_lock_init(&lockup_detector_lock);
+ hpsa_lockup_detector =
+ kthread_run(detect_controller_lockup_thread,
+ NULL, "hpsa");
+ }
+ if (!hpsa_lockup_detector) {
+ dev_warn(&h->pdev->dev,
+ "Could not start lockup detector thread\n");
+ return;
+ }
+ add_ctlr_to_lockup_detector_list(h);
+}
+
+static void stop_controller_lockup_detector(struct ctlr_info *h)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&lockup_detector_lock, flags);
+ remove_ctlr_from_lockup_detector_list(h);
+ /* If the list of ctlr's to monitor is empty, stop the thread */
+ if (list_empty(&hpsa_ctlr_list)) {
+ kthread_stop(hpsa_lockup_detector);
+ hpsa_lockup_detector = NULL;
+ }
+ spin_unlock_irqrestore(&lockup_detector_lock, flags);
+}
+
static int __devinit hpsa_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
return -ENOMEM;
h->pdev = pdev;
- h->busy_initializing = 1;
h->intr_mode = hpsa_simple_mode ? SIMPLE_MODE_INT : PERF_MODE_INT;
INIT_LIST_HEAD(&h->cmpQ);
INIT_LIST_HEAD(&h->reqQ);
hpsa_hba_inquiry(h);
hpsa_register_scsi(h); /* hook ourselves into SCSI subsystem */
- h->busy_initializing = 0;
+ start_controller_lockup_detector(h);
return 1;
clean4:
free_irq(h->intr[h->intr_mode], h);
clean2:
clean1:
- h->busy_initializing = 0;
kfree(h);
return rc;
}
struct ctlr_info *h;
if (pci_get_drvdata(pdev) == NULL) {
- dev_err(&pdev->dev, "unable to remove device \n");
+ dev_err(&pdev->dev, "unable to remove device\n");
return;
}
h = pci_get_drvdata(pdev);
+ stop_controller_lockup_detector(h);
hpsa_unregister_scsi(h); /* unhook from SCSI subsystem */
hpsa_shutdown(pdev);
iounmap(h->vaddr);
unsigned long *cmd_pool_bits;
int nr_allocs;
int nr_frees;
- int busy_initializing;
- int busy_scanning;
int scan_finished;
spinlock_t scan_lock;
wait_queue_head_t scan_wait_queue;
struct Scsi_Host *scsi_host;
spinlock_t devlock; /* to protect hba[ctlr]->dev[]; */
int ndevices; /* number of used elements in .dev[] array. */
-#define HPSA_MAX_SCSI_DEVS_PER_HBA 256
- struct hpsa_scsi_dev_t *dev[HPSA_MAX_SCSI_DEVS_PER_HBA];
+ struct hpsa_scsi_dev_t *dev[HPSA_MAX_DEVICES];
/*
* Performant mode tables.
*/
unsigned char reply_pool_wraparound;
u32 *blockFetchTable;
unsigned char *hba_inquiry_data;
+ u64 last_intr_timestamp;
+ u32 last_heartbeat;
+ u64 last_heartbeat_timestamp;
+ u32 lockup_detected;
+ struct list_head lockup_list;
};
#define HPSA_ABORT_MSG 0
#define HPSA_DEVICE_RESET_MSG 1
/* FIXME this is a per controller value (barf!) */
#define HPSA_MAX_TARGETS_PER_CTLR 16
-#define HPSA_MAX_LUN 256
+#define HPSA_MAX_LUN 1024
#define HPSA_MAX_PHYS_LUN 1024
+#define MAX_MSA2XXX_ENCLOSURES 32
+#define HPSA_MAX_DEVICES (HPSA_MAX_PHYS_LUN + HPSA_MAX_LUN + \
+ MAX_MSA2XXX_ENCLOSURES + 1) /* + 1 is for the controller itself */
/* SCSI-3 Commands */
#pragma pack(1)
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_574D, 0, 0, 0 },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_FPGA_E2,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B2, 0, 0, 0 },
+ { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_FPGA_E2,
+ PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57C3, 0, 0, 0 },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_FPGA_E2,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57C4, 0, 0, 0 },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_ASIC_E2,
#define IPR_SUBS_DEV_ID_57B4 0x033B
#define IPR_SUBS_DEV_ID_57B2 0x035F
+#define IPR_SUBS_DEV_ID_57C3 0x0353
#define IPR_SUBS_DEV_ID_57C4 0x0354
#define IPR_SUBS_DEV_ID_57C6 0x0357
#define IPR_SUBS_DEV_ID_57CC 0x035C
u->stp_max_occupancy_timeout = stp_max_occ_to;
u->ssp_max_occupancy_timeout = ssp_max_occ_to;
u->no_outbound_task_timeout = no_outbound_task_to;
- u->max_number_concurrent_device_spin_up = max_concurr_spinup;
+ u->max_concurr_spinup = max_concurr_spinup;
}
static void sci_controller_initial_state_enter(struct sci_base_state_machine *sm)
ihost->oem_parameters.controller.mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE;
/* Default to APC mode. */
- ihost->oem_parameters.controller.max_concurrent_dev_spin_up = 1;
+ ihost->oem_parameters.controller.max_concurr_spin_up = 1;
/* Default to no SSC operation. */
ihost->oem_parameters.controller.do_enable_ssc = false;
} else
return -EINVAL;
- if (oem->controller.max_concurrent_dev_spin_up > MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT)
+ if (oem->controller.max_concurr_spin_up > MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT ||
+ oem->controller.max_concurr_spin_up < 1)
return -EINVAL;
return 0;
return SCI_FAILURE_INVALID_STATE;
}
+static u8 max_spin_up(struct isci_host *ihost)
+{
+ if (ihost->user_parameters.max_concurr_spinup)
+ return min_t(u8, ihost->user_parameters.max_concurr_spinup,
+ MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT);
+ else
+ return min_t(u8, ihost->oem_parameters.controller.max_concurr_spin_up,
+ MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT);
+}
+
static void power_control_timeout(unsigned long data)
{
struct sci_timer *tmr = (struct sci_timer *)data;
if (iphy == NULL)
continue;
- if (ihost->power_control.phys_granted_power >=
- ihost->oem_parameters.controller.max_concurrent_dev_spin_up)
+ if (ihost->power_control.phys_granted_power >= max_spin_up(ihost))
break;
ihost->power_control.requesters[i] = NULL;
{
BUG_ON(iphy == NULL);
- if (ihost->power_control.phys_granted_power <
- ihost->oem_parameters.controller.max_concurrent_dev_spin_up) {
+ if (ihost->power_control.phys_granted_power < max_spin_up(ihost)) {
ihost->power_control.phys_granted_power++;
sci_phy_consume_power_handler(iphy);
module_param(phy_gen, byte, 0);
MODULE_PARM_DESC(phy_gen, "PHY generation (1: 1.5Gbps 2: 3.0Gbps 3: 6.0Gbps)");
-unsigned char max_concurr_spinup = 1;
+unsigned char max_concurr_spinup;
module_param(max_concurr_spinup, byte, 0);
MODULE_PARM_DESC(max_concurr_spinup, "Max concurrent device spinup");
}
}
-/* called under sci_lock to stabilize phy:port associations */
-void isci_port_bcn_enable(struct isci_host *ihost, struct isci_port *iport)
-{
- int i;
-
- clear_bit(IPORT_BCN_BLOCKED, &iport->flags);
- wake_up(&ihost->eventq);
-
- if (!test_and_clear_bit(IPORT_BCN_PENDING, &iport->flags))
- return;
-
- for (i = 0; i < ARRAY_SIZE(iport->phy_table); i++) {
- struct isci_phy *iphy = iport->phy_table[i];
-
- if (!iphy)
- continue;
-
- ihost->sas_ha.notify_port_event(&iphy->sas_phy,
- PORTE_BROADCAST_RCVD);
- break;
- }
-}
-
static void isci_port_bc_change_received(struct isci_host *ihost,
struct isci_port *iport,
struct isci_phy *iphy)
{
- if (iport && test_bit(IPORT_BCN_BLOCKED, &iport->flags)) {
- dev_dbg(&ihost->pdev->dev,
- "%s: disabled BCN; isci_phy = %p, sas_phy = %p\n",
- __func__, iphy, &iphy->sas_phy);
- set_bit(IPORT_BCN_PENDING, &iport->flags);
- atomic_inc(&iport->event);
- wake_up(&ihost->eventq);
- } else {
- dev_dbg(&ihost->pdev->dev,
- "%s: isci_phy = %p, sas_phy = %p\n",
- __func__, iphy, &iphy->sas_phy);
+ dev_dbg(&ihost->pdev->dev,
+ "%s: isci_phy = %p, sas_phy = %p\n",
+ __func__, iphy, &iphy->sas_phy);
- ihost->sas_ha.notify_port_event(&iphy->sas_phy,
- PORTE_BROADCAST_RCVD);
- }
+ ihost->sas_ha.notify_port_event(&iphy->sas_phy, PORTE_BROADCAST_RCVD);
sci_port_bcn_enable(iport);
}
/* check to see if this is the last phy on this port. */
if (isci_phy->sas_phy.port &&
isci_phy->sas_phy.port->num_phys == 1) {
- atomic_inc(&isci_port->event);
- isci_port_bcn_enable(isci_host, isci_port);
-
/* change the state for all devices on this port. The
* next task sent to this device will be returned as
* SAS_TASK_UNDELIVERED, and the scsi mid layer will
dev_dbg(&ihost->pdev->dev, "Port stop complete\n");
}
+
+static bool is_port_ready_state(enum sci_port_states state)
+{
+ switch (state) {
+ case SCI_PORT_READY:
+ case SCI_PORT_SUB_WAITING:
+ case SCI_PORT_SUB_OPERATIONAL:
+ case SCI_PORT_SUB_CONFIGURING:
+ return true;
+ default:
+ return false;
+ }
+}
+
+/* flag dummy rnc hanling when exiting a ready state */
+static void port_state_machine_change(struct isci_port *iport,
+ enum sci_port_states state)
+{
+ struct sci_base_state_machine *sm = &iport->sm;
+ enum sci_port_states old_state = sm->current_state_id;
+
+ if (is_port_ready_state(old_state) && !is_port_ready_state(state))
+ iport->ready_exit = true;
+
+ sci_change_state(sm, state);
+ iport->ready_exit = false;
+}
+
/**
* isci_port_hard_reset_complete() - This function is called by the sci core
* when the hard reset complete notification has been received.
/* Save the status of the hard reset from the port. */
isci_port->hard_reset_status = completion_status;
+ if (completion_status != SCI_SUCCESS) {
+
+ /* The reset failed. The port state is now SCI_PORT_FAILED. */
+ if (isci_port->active_phy_mask == 0) {
+
+ /* Generate the link down now to the host, since it
+ * was intercepted by the hard reset state machine when
+ * it really happened.
+ */
+ isci_port_link_down(isci_port->isci_host,
+ &isci_port->isci_host->phys[
+ isci_port->last_active_phy],
+ isci_port);
+ }
+ /* Advance the port state so that link state changes will be
+ * noticed.
+ */
+ port_state_machine_change(isci_port, SCI_PORT_SUB_WAITING);
+
+ }
complete_all(&isci_port->hard_reset_complete);
}
struct isci_host *ihost = iport->owning_controller;
iport->active_phy_mask &= ~(1 << iphy->phy_index);
+ if (!iport->active_phy_mask)
+ iport->last_active_phy = iphy->phy_index;
iphy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN;
}
}
-static bool is_port_ready_state(enum sci_port_states state)
-{
- switch (state) {
- case SCI_PORT_READY:
- case SCI_PORT_SUB_WAITING:
- case SCI_PORT_SUB_OPERATIONAL:
- case SCI_PORT_SUB_CONFIGURING:
- return true;
- default:
- return false;
- }
-}
-
-/* flag dummy rnc hanling when exiting a ready state */
-static void port_state_machine_change(struct isci_port *iport,
- enum sci_port_states state)
-{
- struct sci_base_state_machine *sm = &iport->sm;
- enum sci_port_states old_state = sm->current_state_id;
-
- if (is_port_ready_state(old_state) && !is_port_ready_state(state))
- iport->ready_exit = true;
-
- sci_change_state(sm, state);
- iport->ready_exit = false;
-}
-
/**
* sci_port_general_link_up_handler - phy can be assigned to port?
* @sci_port: sci_port object for which has a phy that has gone link up.
iport->logical_port_index = SCIC_SDS_DUMMY_PORT;
iport->physical_port_index = index;
iport->active_phy_mask = 0;
- iport->ready_exit = false;
+ iport->last_active_phy = 0;
+ iport->ready_exit = false;
iport->owning_controller = ihost;
init_completion(&iport->start_complete);
iport->isci_host = ihost;
isci_port_change_state(iport, isci_freed);
- atomic_set(&iport->event, 0);
}
/**
{
unsigned long flags;
enum sci_status status;
- int idx, ret = TMF_RESP_FUNC_COMPLETE;
+ int ret = TMF_RESP_FUNC_COMPLETE;
dev_dbg(&ihost->pdev->dev, "%s: iport = %p\n",
__func__, iport);
"%s: iport = %p; hard reset completion\n",
__func__, iport);
- if (iport->hard_reset_status != SCI_SUCCESS)
+ if (iport->hard_reset_status != SCI_SUCCESS) {
ret = TMF_RESP_FUNC_FAILED;
+
+ dev_err(&ihost->pdev->dev,
+ "%s: iport = %p; hard reset failed (0x%x)\n",
+ __func__, iport, iport->hard_reset_status);
+ }
} else {
ret = TMF_RESP_FUNC_FAILED;
"%s: iport = %p; hard reset failed "
"(0x%x) - driving explicit link fail for all phys\n",
__func__, iport, iport->hard_reset_status);
-
- /* Down all phys in the port. */
- spin_lock_irqsave(&ihost->scic_lock, flags);
- for (idx = 0; idx < SCI_MAX_PHYS; ++idx) {
- struct isci_phy *iphy = iport->phy_table[idx];
-
- if (!iphy)
- continue;
- sci_phy_stop(iphy);
- sci_phy_start(iphy);
- }
- spin_unlock_irqrestore(&ihost->scic_lock, flags);
}
return ret;
}
/**
* struct isci_port - isci direct attached sas port object
- * @event: counts bcns and port stop events (for bcn filtering)
* @ready_exit: several states constitute 'ready'. When exiting ready we
* need to take extra port-teardown actions that are
* skipped when exiting to another 'ready' state.
*/
struct isci_port {
enum isci_status status;
- #define IPORT_BCN_BLOCKED 0
- #define IPORT_BCN_PENDING 1
- unsigned long flags;
- atomic_t event;
struct isci_host *isci_host;
struct asd_sas_port sas_port;
struct list_head remote_dev_list;
u8 logical_port_index;
u8 physical_port_index;
u8 active_phy_mask;
+ u8 last_active_phy;
u16 reserved_rni;
u16 reserved_tag;
u32 started_request_count;
* This field specifies the maximum number of direct attached devices
* that can have power supplied to them simultaneously.
*/
- u8 max_number_concurrent_device_spin_up;
+ u8 max_concurr_spinup;
/**
* This field specifies the number of seconds to allow a phy to consume
struct sci_oem_params {
struct {
uint8_t mode_type;
- uint8_t max_concurrent_dev_spin_up;
+ uint8_t max_concurr_spin_up;
uint8_t do_enable_ssc;
uint8_t reserved;
} controller;
return status == SCI_SUCCESS ? 0 : -ENODEV;
}
-/**
- * isci_device_is_reset_pending() - This function will check if there is any
- * pending reset condition on the device.
- * @request: This parameter is the isci_device object.
- *
- * true if there is a reset pending for the device.
- */
-bool isci_device_is_reset_pending(
- struct isci_host *isci_host,
- struct isci_remote_device *isci_device)
-{
- struct isci_request *isci_request;
- struct isci_request *tmp_req;
- bool reset_is_pending = false;
- unsigned long flags;
-
- dev_dbg(&isci_host->pdev->dev,
- "%s: isci_device = %p\n", __func__, isci_device);
-
- spin_lock_irqsave(&isci_host->scic_lock, flags);
-
- /* Check for reset on all pending requests. */
- list_for_each_entry_safe(isci_request, tmp_req,
- &isci_device->reqs_in_process, dev_node) {
- dev_dbg(&isci_host->pdev->dev,
- "%s: isci_device = %p request = %p\n",
- __func__, isci_device, isci_request);
-
- if (isci_request->ttype == io_task) {
- struct sas_task *task = isci_request_access_task(
- isci_request);
-
- spin_lock(&task->task_state_lock);
- if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET)
- reset_is_pending = true;
- spin_unlock(&task->task_state_lock);
- }
- }
-
- spin_unlock_irqrestore(&isci_host->scic_lock, flags);
-
- dev_dbg(&isci_host->pdev->dev,
- "%s: isci_device = %p reset_is_pending = %d\n",
- __func__, isci_device, reset_is_pending);
-
- return reset_is_pending;
-}
-
-/**
- * isci_device_clear_reset_pending() - This function will clear if any pending
- * reset condition flags on the device.
- * @request: This parameter is the isci_device object.
- *
- * true if there is a reset pending for the device.
- */
-void isci_device_clear_reset_pending(struct isci_host *ihost, struct isci_remote_device *idev)
-{
- struct isci_request *isci_request;
- struct isci_request *tmp_req;
- unsigned long flags = 0;
-
- dev_dbg(&ihost->pdev->dev, "%s: idev=%p, ihost=%p\n",
- __func__, idev, ihost);
-
- spin_lock_irqsave(&ihost->scic_lock, flags);
-
- /* Clear reset pending on all pending requests. */
- list_for_each_entry_safe(isci_request, tmp_req,
- &idev->reqs_in_process, dev_node) {
- dev_dbg(&ihost->pdev->dev, "%s: idev = %p request = %p\n",
- __func__, idev, isci_request);
-
- if (isci_request->ttype == io_task) {
-
- unsigned long flags2;
- struct sas_task *task = isci_request_access_task(
- isci_request);
-
- spin_lock_irqsave(&task->task_state_lock, flags2);
- task->task_state_flags &= ~SAS_TASK_NEED_DEV_RESET;
- spin_unlock_irqrestore(&task->task_state_lock, flags2);
- }
- }
- spin_unlock_irqrestore(&ihost->scic_lock, flags);
-}
struct isci_remote_device *idev);
void isci_remote_device_gone(struct domain_device *domain_dev);
int isci_remote_device_found(struct domain_device *domain_dev);
-bool isci_device_is_reset_pending(struct isci_host *ihost,
- struct isci_remote_device *idev);
-void isci_device_clear_reset_pending(struct isci_host *ihost,
- struct isci_remote_device *idev);
+
/**
* sci_remote_device_stop() - This method will stop both transmission and
* reception of link activity for the supplied remote device. This method
task_iu->task_func = isci_tmf->tmf_code;
task_iu->task_tag =
- (ireq->ttype == tmf_task) ?
+ (test_bit(IREQ_TMF, &ireq->flags)) ?
isci_tmf->io_tag :
SCI_CONTROLLER_INVALID_IO_TAG;
}
struct domain_device *dev = ireq->target_device->domain_dev;
/* check for management protocols */
- if (ireq->ttype == tmf_task) {
+ if (test_bit(IREQ_TMF, &ireq->flags)) {
struct isci_tmf *tmf = isci_request_access_tmf(ireq);
if (tmf->tmf_code == isci_tmf_sata_srst_high ||
enum sci_status status = SCI_SUCCESS;
/* check for management protocols */
- if (ireq->ttype == tmf_task) {
+ if (test_bit(IREQ_TMF, &ireq->flags)) {
struct isci_tmf *tmf = isci_request_access_tmf(ireq);
if (tmf->tmf_code == isci_tmf_sata_srst_high ||
switch (task_notification_selection) {
case isci_perform_normal_io_completion:
-
/* Normal notification (task_done) */
- dev_dbg(&host->pdev->dev,
- "%s: Normal - task = %p, response=%d (%d), status=%d (%d)\n",
- __func__,
- task,
- task->task_status.resp, response,
- task->task_status.stat, status);
+
/* Add to the completed list. */
list_add(&request->completed_node,
&host->requests_to_complete);
/* No notification to libsas because this request is
* already in the abort path.
*/
- dev_dbg(&host->pdev->dev,
- "%s: Aborted - task = %p, response=%d (%d), status=%d (%d)\n",
- __func__,
- task,
- task->task_status.resp, response,
- task->task_status.stat, status);
-
/* Wake up whatever process was waiting for this
* request to complete.
*/
case isci_perform_error_io_completion:
/* Use sas_task_abort */
- dev_dbg(&host->pdev->dev,
- "%s: Error - task = %p, response=%d (%d), status=%d (%d)\n",
- __func__,
- task,
- task->task_status.resp, response,
- task->task_status.stat, status);
/* Add to the aborted list. */
list_add(&request->completed_node,
&host->requests_to_errorback);
break;
default:
- dev_dbg(&host->pdev->dev,
- "%s: Unknown - task = %p, response=%d (%d), status=%d (%d)\n",
- __func__,
- task,
- task->task_status.resp, response,
- task->task_status.stat, status);
-
/* Add to the error to libsas list. */
list_add(&request->completed_node,
&host->requests_to_errorback);
break;
}
+ dev_dbg(&host->pdev->dev,
+ "%s: %d - task = %p, response=%d (%d), status=%d (%d)\n",
+ __func__, task_notification_selection, task,
+ (task) ? task->task_status.resp : 0, response,
+ (task) ? task->task_status.stat : 0, status);
}
static void isci_process_stp_response(struct sas_task *task, struct dev_to_host_fis *fis)
struct sas_task *task = isci_request_access_task(request);
struct ssp_response_iu *resp_iu;
unsigned long task_flags;
- struct isci_remote_device *idev = isci_lookup_device(task->dev);
- enum service_response response = SAS_TASK_UNDELIVERED;
- enum exec_status status = SAS_ABORTED_TASK;
+ struct isci_remote_device *idev = request->target_device;
+ enum service_response response = SAS_TASK_UNDELIVERED;
+ enum exec_status status = SAS_ABORTED_TASK;
enum isci_request_status request_status;
enum isci_completion_selection complete_to_host
= isci_perform_normal_io_completion;
/* complete the io request to the core. */
sci_controller_complete_io(ihost, request->target_device, request);
- isci_put_device(idev);
/* set terminated handle so it cannot be completed or
* terminated again, and to cause any calls into abort
/* XXX as hch said always creating an internal sas_task for tmf
* requests would simplify the driver
*/
- task = ireq->ttype == io_task ? isci_request_access_task(ireq) : NULL;
+ task = (test_bit(IREQ_TMF, &ireq->flags)) ? NULL : isci_request_access_task(ireq);
/* all unaccelerated request types (non ssp or ncq) handled with
* substates
ireq = isci_request_from_tag(ihost, tag);
ireq->ttype_ptr.io_task_ptr = task;
- ireq->ttype = io_task;
+ clear_bit(IREQ_TMF, &ireq->flags);
task->lldd_task = ireq;
return ireq;
ireq = isci_request_from_tag(ihost, tag);
ireq->ttype_ptr.tmf_task_ptr = isci_tmf;
- ireq->ttype = tmf_task;
+ set_bit(IREQ_TMF, &ireq->flags);
return ireq;
}
dead = 0x07
};
-enum task_type {
- io_task = 0,
- tmf_task = 1
-};
-
enum sci_request_protocol {
SCIC_NO_PROTOCOL,
SCIC_SMP_PROTOCOL,
#define IREQ_ACTIVE 3
unsigned long flags;
/* XXX kill ttype and ttype_ptr, allocate full sas_task */
- enum task_type ttype;
union ttype_ptr_union {
struct sas_task *io_task_ptr; /* When ttype==io_task */
struct isci_tmf *tmf_task_ptr; /* When ttype==tmf_task */
task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
spin_unlock_irqrestore(&task->task_state_lock, flags);
- /* Indicate QUEUE_FULL so that the scsi
- * midlayer retries. if the request
- * failed for remote device reasons,
- * it gets returned as
- * SAS_TASK_UNDELIVERED next time
- * through.
- */
- isci_task_refuse(ihost, task,
- SAS_TASK_COMPLETE,
- SAS_QUEUE_FULL);
+ if (test_bit(IDEV_GONE, &idev->flags)) {
+
+ /* Indicate that the device
+ * is gone.
+ */
+ isci_task_refuse(ihost, task,
+ SAS_TASK_UNDELIVERED,
+ SAS_DEVICE_UNKNOWN);
+ } else {
+ /* Indicate QUEUE_FULL so that
+ * the scsi midlayer retries.
+ * If the request failed for
+ * remote device reasons, it
+ * gets returned as
+ * SAS_TASK_UNDELIVERED next
+ * time through.
+ */
+ isci_task_refuse(ihost, task,
+ SAS_TASK_COMPLETE,
+ SAS_QUEUE_FULL);
+ }
}
}
}
struct isci_tmf *isci_tmf;
enum sci_status status;
- if (tmf_task != ireq->ttype)
+ if (!test_bit(IREQ_TMF, &ireq->flags))
return SCI_FAILURE;
isci_tmf = isci_request_access_tmf(ireq);
return ireq;
}
+/**
+* isci_request_mark_zombie() - This function must be called with scic_lock held.
+*/
+static void isci_request_mark_zombie(struct isci_host *ihost, struct isci_request *ireq)
+{
+ struct completion *tmf_completion = NULL;
+ struct completion *req_completion;
+
+ /* Set the request state to "dead". */
+ ireq->status = dead;
+
+ req_completion = ireq->io_request_completion;
+ ireq->io_request_completion = NULL;
+
+ if (test_bit(IREQ_TMF, &ireq->flags)) {
+ /* Break links with the TMF request. */
+ struct isci_tmf *tmf = isci_request_access_tmf(ireq);
+
+ /* In the case where a task request is dying,
+ * the thread waiting on the complete will sit and
+ * timeout unless we wake it now. Since the TMF
+ * has a default error status, complete it here
+ * to wake the waiting thread.
+ */
+ if (tmf) {
+ tmf_completion = tmf->complete;
+ tmf->complete = NULL;
+ }
+ ireq->ttype_ptr.tmf_task_ptr = NULL;
+ dev_dbg(&ihost->pdev->dev, "%s: tmf_code %d, managed tag %#x\n",
+ __func__, tmf->tmf_code, tmf->io_tag);
+ } else {
+ /* Break links with the sas_task - the callback is done
+ * elsewhere.
+ */
+ struct sas_task *task = isci_request_access_task(ireq);
+
+ if (task)
+ task->lldd_task = NULL;
+
+ ireq->ttype_ptr.io_task_ptr = NULL;
+ }
+
+ dev_warn(&ihost->pdev->dev, "task context unrecoverable (tag: %#x)\n",
+ ireq->io_tag);
+
+ /* Don't force waiting threads to timeout. */
+ if (req_completion)
+ complete(req_completion);
+
+ if (tmf_completion != NULL)
+ complete(tmf_completion);
+}
+
static int isci_task_execute_tmf(struct isci_host *ihost,
struct isci_remote_device *idev,
struct isci_tmf *tmf, unsigned long timeout_ms)
/* Assign the pointer to the TMF's completion kernel wait structure. */
tmf->complete = &completion;
+ tmf->status = SCI_FAILURE_TIMEOUT;
ireq = isci_task_request_build(ihost, idev, tag, tmf);
if (!ireq)
msecs_to_jiffies(timeout_ms));
if (timeleft == 0) {
+ /* The TMF did not complete - this could be because
+ * of an unplug. Terminate the TMF request now.
+ */
spin_lock_irqsave(&ihost->scic_lock, flags);
if (tmf->cb_state_func != NULL)
- tmf->cb_state_func(isci_tmf_timed_out, tmf, tmf->cb_data);
+ tmf->cb_state_func(isci_tmf_timed_out, tmf,
+ tmf->cb_data);
- sci_controller_terminate_request(ihost,
- idev,
- ireq);
+ sci_controller_terminate_request(ihost, idev, ireq);
spin_unlock_irqrestore(&ihost->scic_lock, flags);
- wait_for_completion(tmf->complete);
+ timeleft = wait_for_completion_timeout(
+ &completion,
+ msecs_to_jiffies(ISCI_TERMINATION_TIMEOUT_MSEC));
+
+ if (!timeleft) {
+ /* Strange condition - the termination of the TMF
+ * request timed-out.
+ */
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+
+ /* If the TMF status has not changed, kill it. */
+ if (tmf->status == SCI_FAILURE_TIMEOUT)
+ isci_request_mark_zombie(ihost, ireq);
+
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+ }
}
isci_print_tmf(tmf);
return old_state;
}
-/**
-* isci_request_cleanup_completed_loiterer() - This function will take care of
-* the final cleanup on any request which has been explicitly terminated.
-* @isci_host: This parameter specifies the ISCI host object
-* @isci_device: This is the device to which the request is pending.
-* @isci_request: This parameter specifies the terminated request object.
-* @task: This parameter is the libsas I/O request.
-*/
-static void isci_request_cleanup_completed_loiterer(
- struct isci_host *isci_host,
- struct isci_remote_device *isci_device,
- struct isci_request *isci_request,
- struct sas_task *task)
+static int isci_request_is_dealloc_managed(enum isci_request_status stat)
{
- unsigned long flags;
-
- dev_dbg(&isci_host->pdev->dev,
- "%s: isci_device=%p, request=%p, task=%p\n",
- __func__, isci_device, isci_request, task);
-
- if (task != NULL) {
-
- spin_lock_irqsave(&task->task_state_lock, flags);
- task->lldd_task = NULL;
-
- task->task_state_flags &= ~SAS_TASK_NEED_DEV_RESET;
-
- isci_set_task_doneflags(task);
-
- /* If this task is not in the abort path, call task_done. */
- if (!(task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
-
- spin_unlock_irqrestore(&task->task_state_lock, flags);
- task->task_done(task);
- } else
- spin_unlock_irqrestore(&task->task_state_lock, flags);
- }
-
- if (isci_request != NULL) {
- spin_lock_irqsave(&isci_host->scic_lock, flags);
- list_del_init(&isci_request->dev_node);
- spin_unlock_irqrestore(&isci_host->scic_lock, flags);
+ switch (stat) {
+ case aborted:
+ case aborting:
+ case terminating:
+ case completed:
+ case dead:
+ return true;
+ default:
+ return false;
}
}
enum sci_status status = SCI_SUCCESS;
bool was_terminated = false;
bool needs_cleanup_handling = false;
- enum isci_request_status request_status;
unsigned long flags;
unsigned long termination_completed = 1;
struct completion *io_request_completion;
- struct sas_task *task;
dev_dbg(&ihost->pdev->dev,
"%s: device = %p; request = %p\n",
io_request_completion = isci_request->io_request_completion;
- task = (isci_request->ttype == io_task)
- ? isci_request_access_task(isci_request)
- : NULL;
-
/* Note that we are not going to control
* the target to abort the request.
*/
__func__, isci_request, io_request_completion);
/* Wait here for the request to complete. */
- #define TERMINATION_TIMEOUT_MSEC 500
termination_completed
= wait_for_completion_timeout(
io_request_completion,
- msecs_to_jiffies(TERMINATION_TIMEOUT_MSEC));
+ msecs_to_jiffies(ISCI_TERMINATION_TIMEOUT_MSEC));
if (!termination_completed) {
/* The request to terminate has timed out. */
- spin_lock_irqsave(&ihost->scic_lock,
- flags);
+ spin_lock_irqsave(&ihost->scic_lock, flags);
/* Check for state changes. */
- if (!test_bit(IREQ_TERMINATED, &isci_request->flags)) {
+ if (!test_bit(IREQ_TERMINATED,
+ &isci_request->flags)) {
/* The best we can do is to have the
* request die a silent death if it
* ever really completes.
- *
- * Set the request state to "dead",
- * and clear the task pointer so that
- * an actual completion event callback
- * doesn't do anything.
*/
- isci_request->status = dead;
- isci_request->io_request_completion
- = NULL;
-
- if (isci_request->ttype == io_task) {
-
- /* Break links with the
- * sas_task.
- */
- isci_request->ttype_ptr.io_task_ptr
- = NULL;
- }
+ isci_request_mark_zombie(ihost,
+ isci_request);
+ needs_cleanup_handling = true;
} else
termination_completed = 1;
* needs to be detached and freed here.
*/
spin_lock_irqsave(&isci_request->state_lock, flags);
- request_status = isci_request->status;
-
- if ((isci_request->ttype == io_task) /* TMFs are in their own thread */
- && ((request_status == aborted)
- || (request_status == aborting)
- || (request_status == terminating)
- || (request_status == completed)
- || (request_status == dead)
- )
- ) {
-
- /* The completion routine won't free a request in
- * the aborted/aborting/etc. states, so we do
- * it here.
- */
- needs_cleanup_handling = true;
- }
+
+ needs_cleanup_handling
+ = isci_request_is_dealloc_managed(
+ isci_request->status);
+
spin_unlock_irqrestore(&isci_request->state_lock, flags);
}
- if (needs_cleanup_handling)
- isci_request_cleanup_completed_loiterer(
- ihost, idev, isci_request, task);
+ if (needs_cleanup_handling) {
+
+ dev_dbg(&ihost->pdev->dev,
+ "%s: cleanup isci_device=%p, request=%p\n",
+ __func__, idev, isci_request);
+
+ if (isci_request != NULL) {
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+ isci_free_tag(ihost, isci_request->io_tag);
+ isci_request_change_state(isci_request, unallocated);
+ list_del_init(&isci_request->dev_node);
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+ }
+ }
}
}
dev_dbg(&ihost->pdev->dev,
"%s: idev=%p request=%p; task=%p old_state=%d\n",
__func__, idev, ireq,
- ireq->ttype == io_task ? isci_request_access_task(ireq) : NULL,
+ (!test_bit(IREQ_TMF, &ireq->flags)
+ ? isci_request_access_task(ireq)
+ : NULL),
old_state);
/* If the old_state is started:
"%s: domain_device=%p, isci_host=%p; isci_device=%p\n",
__func__, domain_device, isci_host, isci_device);
- if (isci_device)
- set_bit(IDEV_EH, &isci_device->flags);
+ if (!isci_device) {
+ /* If the device is gone, stop the escalations. */
+ dev_dbg(&isci_host->pdev->dev, "%s: No dev\n", __func__);
- /* If there is a device reset pending on any request in the
- * device's list, fail this LUN reset request in order to
- * escalate to the device reset.
- */
- if (!isci_device ||
- isci_device_is_reset_pending(isci_host, isci_device)) {
- dev_dbg(&isci_host->pdev->dev,
- "%s: No dev (%p), or "
- "RESET PENDING: domain_device=%p\n",
- __func__, isci_device, domain_device);
- ret = TMF_RESP_FUNC_FAILED;
+ ret = TMF_RESP_FUNC_COMPLETE;
goto out;
}
+ set_bit(IDEV_EH, &isci_device->flags);
/* Send the task management part of the reset. */
if (sas_protocol_ata(domain_device->tproto)) {
struct isci_tmf tmf;
int ret = TMF_RESP_FUNC_FAILED;
unsigned long flags;
- bool any_dev_reset = false;
+ int perform_termination = 0;
/* Get the isci_request reference from the task. Note that
* this check does not depend on the pending request list
spin_unlock_irqrestore(&isci_host->scic_lock, flags);
dev_dbg(&isci_host->pdev->dev,
- "%s: task = %p\n", __func__, task);
-
- if (!isci_device || !old_request)
- goto out;
-
- set_bit(IDEV_EH, &isci_device->flags);
-
- /* This version of the driver will fail abort requests for
- * SATA/STP. Failing the abort request this way will cause the
- * SCSI error handler thread to escalate to LUN reset
- */
- if (sas_protocol_ata(task->task_proto)) {
- dev_dbg(&isci_host->pdev->dev,
- " task %p is for a STP/SATA device;"
- " returning TMF_RESP_FUNC_FAILED\n"
- " to cause a LUN reset...\n", task);
- goto out;
- }
+ "%s: dev = %p, task = %p, old_request == %p\n",
+ __func__, isci_device, task, old_request);
- dev_dbg(&isci_host->pdev->dev,
- "%s: old_request == %p\n", __func__, old_request);
-
- any_dev_reset = isci_device_is_reset_pending(isci_host, isci_device);
-
- spin_lock_irqsave(&task->task_state_lock, flags);
-
- any_dev_reset = any_dev_reset || (task->task_state_flags & SAS_TASK_NEED_DEV_RESET);
+ if (isci_device)
+ set_bit(IDEV_EH, &isci_device->flags);
- /* If the extraction of the request reference from the task
- * failed, then the request has been completed (or if there is a
- * pending reset then this abort request function must be failed
- * in order to escalate to the target reset).
+ /* Device reset conditions signalled in task_state_flags are the
+ * responsbility of libsas to observe at the start of the error
+ * handler thread.
*/
- if ((old_request == NULL) || any_dev_reset) {
-
- /* If the device reset task flag is set, fail the task
- * management request. Otherwise, the original request
- * has completed.
- */
- if (any_dev_reset) {
-
- /* Turn off the task's DONE to make sure this
- * task is escalated to a target reset.
- */
- task->task_state_flags &= ~SAS_TASK_STATE_DONE;
-
- /* Make the reset happen as soon as possible. */
- task->task_state_flags |= SAS_TASK_NEED_DEV_RESET;
-
- spin_unlock_irqrestore(&task->task_state_lock, flags);
-
- /* Fail the task management request in order to
- * escalate to the target reset.
- */
- ret = TMF_RESP_FUNC_FAILED;
-
- dev_dbg(&isci_host->pdev->dev,
- "%s: Failing task abort in order to "
- "escalate to target reset because\n"
- "SAS_TASK_NEED_DEV_RESET is set for "
- "task %p on dev %p\n",
- __func__, task, isci_device);
-
-
- } else {
- /* The request has already completed and there
- * is nothing to do here other than to set the task
- * done bit, and indicate that the task abort function
- * was sucessful.
- */
- isci_set_task_doneflags(task);
-
- spin_unlock_irqrestore(&task->task_state_lock, flags);
+ if (!isci_device || !old_request) {
+ /* The request has already completed and there
+ * is nothing to do here other than to set the task
+ * done bit, and indicate that the task abort function
+ * was sucessful.
+ */
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ task->task_state_flags |= SAS_TASK_STATE_DONE;
+ task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR |
+ SAS_TASK_STATE_PENDING);
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
- ret = TMF_RESP_FUNC_COMPLETE;
+ ret = TMF_RESP_FUNC_COMPLETE;
- dev_dbg(&isci_host->pdev->dev,
- "%s: abort task not needed for %p\n",
- __func__, task);
- }
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: abort task not needed for %p\n",
+ __func__, task);
goto out;
- } else {
- spin_unlock_irqrestore(&task->task_state_lock, flags);
}
spin_lock_irqsave(&isci_host->scic_lock, flags);
goto out;
}
if (task->task_proto == SAS_PROTOCOL_SMP ||
+ sas_protocol_ata(task->task_proto) ||
test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags)) {
spin_unlock_irqrestore(&isci_host->scic_lock, flags);
dev_dbg(&isci_host->pdev->dev,
- "%s: SMP request (%d)"
+ "%s: %s request"
" or complete_in_target (%d), thus no TMF\n",
- __func__, (task->task_proto == SAS_PROTOCOL_SMP),
+ __func__,
+ ((task->task_proto == SAS_PROTOCOL_SMP)
+ ? "SMP"
+ : (sas_protocol_ata(task->task_proto)
+ ? "SATA/STP"
+ : "<other>")
+ ),
test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags));
- /* Set the state on the task. */
- isci_task_all_done(task);
-
- ret = TMF_RESP_FUNC_COMPLETE;
+ if (test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags)) {
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ task->task_state_flags |= SAS_TASK_STATE_DONE;
+ task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR |
+ SAS_TASK_STATE_PENDING);
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ ret = TMF_RESP_FUNC_COMPLETE;
+ } else {
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR |
+ SAS_TASK_STATE_PENDING);
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ }
- /* Stopping and SMP devices are not sent a TMF, and are not
- * reset, but the outstanding I/O request is terminated below.
+ /* STP and SMP devices are not sent a TMF, but the
+ * outstanding I/O request is terminated below. This is
+ * because SATA/STP and SMP discovery path timeouts directly
+ * call the abort task interface for cleanup.
*/
+ perform_termination = 1;
+
} else {
/* Fill in the tmf stucture */
isci_task_build_abort_task_tmf(&tmf, isci_tmf_ssp_task_abort,
spin_unlock_irqrestore(&isci_host->scic_lock, flags);
- #define ISCI_ABORT_TASK_TIMEOUT_MS 500 /* half second timeout. */
+ #define ISCI_ABORT_TASK_TIMEOUT_MS 500 /* 1/2 second timeout */
ret = isci_task_execute_tmf(isci_host, isci_device, &tmf,
ISCI_ABORT_TASK_TIMEOUT_MS);
- if (ret != TMF_RESP_FUNC_COMPLETE)
+ if (ret == TMF_RESP_FUNC_COMPLETE)
+ perform_termination = 1;
+ else
dev_dbg(&isci_host->pdev->dev,
- "%s: isci_task_send_tmf failed\n",
- __func__);
+ "%s: isci_task_send_tmf failed\n", __func__);
}
- if (ret == TMF_RESP_FUNC_COMPLETE) {
+ if (perform_termination) {
set_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags);
/* Clean up the request on our side, and wait for the aborted
* I/O to complete.
*/
- isci_terminate_request_core(isci_host, isci_device, old_request);
+ isci_terminate_request_core(isci_host, isci_device,
+ old_request);
}
/* Make sure we do not leave a reference to aborted_io_completion */
enum sci_task_status completion_status)
{
struct isci_tmf *tmf = isci_request_access_tmf(ireq);
- struct completion *tmf_complete;
+ struct completion *tmf_complete = NULL;
+ struct completion *request_complete = ireq->io_request_completion;
dev_dbg(&ihost->pdev->dev,
"%s: request = %p, status=%d\n",
isci_request_change_state(ireq, completed);
- tmf->status = completion_status;
set_bit(IREQ_COMPLETE_IN_TARGET, &ireq->flags);
- if (tmf->proto == SAS_PROTOCOL_SSP) {
- memcpy(&tmf->resp.resp_iu,
- &ireq->ssp.rsp,
- SSP_RESP_IU_MAX_SIZE);
- } else if (tmf->proto == SAS_PROTOCOL_SATA) {
- memcpy(&tmf->resp.d2h_fis,
- &ireq->stp.rsp,
- sizeof(struct dev_to_host_fis));
+ if (tmf) {
+ tmf->status = completion_status;
+
+ if (tmf->proto == SAS_PROTOCOL_SSP) {
+ memcpy(&tmf->resp.resp_iu,
+ &ireq->ssp.rsp,
+ SSP_RESP_IU_MAX_SIZE);
+ } else if (tmf->proto == SAS_PROTOCOL_SATA) {
+ memcpy(&tmf->resp.d2h_fis,
+ &ireq->stp.rsp,
+ sizeof(struct dev_to_host_fis));
+ }
+ /* PRINT_TMF( ((struct isci_tmf *)request->task)); */
+ tmf_complete = tmf->complete;
}
-
- /* PRINT_TMF( ((struct isci_tmf *)request->task)); */
- tmf_complete = tmf->complete;
-
sci_controller_complete_io(ihost, ireq->target_device, ireq);
/* set the 'terminated' flag handle to make sure it cannot be terminated
* or completed again.
*/
set_bit(IREQ_TERMINATED, &ireq->flags);
- isci_request_change_state(ireq, unallocated);
- list_del_init(&ireq->dev_node);
-
- /* The task management part completes last. */
- complete(tmf_complete);
-}
-
-static void isci_smp_task_timedout(unsigned long _task)
-{
- struct sas_task *task = (void *) _task;
- unsigned long flags;
-
- spin_lock_irqsave(&task->task_state_lock, flags);
- if (!(task->task_state_flags & SAS_TASK_STATE_DONE))
- task->task_state_flags |= SAS_TASK_STATE_ABORTED;
- spin_unlock_irqrestore(&task->task_state_lock, flags);
-
- complete(&task->completion);
-}
-
-static void isci_smp_task_done(struct sas_task *task)
-{
- if (!del_timer(&task->timer))
- return;
- complete(&task->completion);
-}
-
-static int isci_smp_execute_task(struct isci_host *ihost,
- struct domain_device *dev, void *req,
- int req_size, void *resp, int resp_size)
-{
- int res, retry;
- struct sas_task *task = NULL;
-
- for (retry = 0; retry < 3; retry++) {
- task = sas_alloc_task(GFP_KERNEL);
- if (!task)
- return -ENOMEM;
-
- task->dev = dev;
- task->task_proto = dev->tproto;
- sg_init_one(&task->smp_task.smp_req, req, req_size);
- sg_init_one(&task->smp_task.smp_resp, resp, resp_size);
-
- task->task_done = isci_smp_task_done;
-
- task->timer.data = (unsigned long) task;
- task->timer.function = isci_smp_task_timedout;
- task->timer.expires = jiffies + 10*HZ;
- add_timer(&task->timer);
-
- res = isci_task_execute_task(task, 1, GFP_KERNEL);
-
- if (res) {
- del_timer(&task->timer);
- dev_dbg(&ihost->pdev->dev,
- "%s: executing SMP task failed:%d\n",
- __func__, res);
- goto ex_err;
- }
-
- wait_for_completion(&task->completion);
- res = -ECOMM;
- if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
- dev_dbg(&ihost->pdev->dev,
- "%s: smp task timed out or aborted\n",
- __func__);
- isci_task_abort_task(task);
- if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
- dev_dbg(&ihost->pdev->dev,
- "%s: SMP task aborted and not done\n",
- __func__);
- goto ex_err;
- }
- }
- if (task->task_status.resp == SAS_TASK_COMPLETE &&
- task->task_status.stat == SAM_STAT_GOOD) {
- res = 0;
- break;
- }
- if (task->task_status.resp == SAS_TASK_COMPLETE &&
- task->task_status.stat == SAS_DATA_UNDERRUN) {
- /* no error, but return the number of bytes of
- * underrun */
- res = task->task_status.residual;
- break;
- }
- if (task->task_status.resp == SAS_TASK_COMPLETE &&
- task->task_status.stat == SAS_DATA_OVERRUN) {
- res = -EMSGSIZE;
- break;
- } else {
- dev_dbg(&ihost->pdev->dev,
- "%s: task to dev %016llx response: 0x%x "
- "status 0x%x\n", __func__,
- SAS_ADDR(dev->sas_addr),
- task->task_status.resp,
- task->task_status.stat);
- sas_free_task(task);
- task = NULL;
- }
- }
-ex_err:
- BUG_ON(retry == 3 && task != NULL);
- sas_free_task(task);
- return res;
-}
-
-#define DISCOVER_REQ_SIZE 16
-#define DISCOVER_RESP_SIZE 56
-
-int isci_smp_get_phy_attached_dev_type(struct isci_host *ihost,
- struct domain_device *dev,
- int phy_id, int *adt)
-{
- struct smp_resp *disc_resp;
- u8 *disc_req;
- int res;
-
- disc_resp = kzalloc(DISCOVER_RESP_SIZE, GFP_KERNEL);
- if (!disc_resp)
- return -ENOMEM;
-
- disc_req = kzalloc(DISCOVER_REQ_SIZE, GFP_KERNEL);
- if (disc_req) {
- disc_req[0] = SMP_REQUEST;
- disc_req[1] = SMP_DISCOVER;
- disc_req[9] = phy_id;
- } else {
- kfree(disc_resp);
- return -ENOMEM;
- }
- res = isci_smp_execute_task(ihost, dev, disc_req, DISCOVER_REQ_SIZE,
- disc_resp, DISCOVER_RESP_SIZE);
- if (!res) {
- if (disc_resp->result != SMP_RESP_FUNC_ACC)
- res = disc_resp->result;
- else
- *adt = disc_resp->disc.attached_dev_type;
+ /* As soon as something is in the terminate path, deallocation is
+ * managed there. Note that the final non-managed state of a task
+ * request is "completed".
+ */
+ if ((ireq->status == completed) ||
+ !isci_request_is_dealloc_managed(ireq->status)) {
+ isci_request_change_state(ireq, unallocated);
+ isci_free_tag(ihost, ireq->io_tag);
+ list_del_init(&ireq->dev_node);
}
- kfree(disc_req);
- kfree(disc_resp);
-
- return res;
-}
-
-static void isci_wait_for_smp_phy_reset(struct isci_remote_device *idev, int phy_num)
-{
- struct domain_device *dev = idev->domain_dev;
- struct isci_port *iport = idev->isci_port;
- struct isci_host *ihost = iport->isci_host;
- int res, iteration = 0, attached_device_type;
- #define STP_WAIT_MSECS 25000
- unsigned long tmo = msecs_to_jiffies(STP_WAIT_MSECS);
- unsigned long deadline = jiffies + tmo;
- enum {
- SMP_PHYWAIT_PHYDOWN,
- SMP_PHYWAIT_PHYUP,
- SMP_PHYWAIT_DONE
- } phy_state = SMP_PHYWAIT_PHYDOWN;
-
- /* While there is time, wait for the phy to go away and come back */
- while (time_is_after_jiffies(deadline) && phy_state != SMP_PHYWAIT_DONE) {
- int event = atomic_read(&iport->event);
-
- ++iteration;
-
- tmo = wait_event_timeout(ihost->eventq,
- event != atomic_read(&iport->event) ||
- !test_bit(IPORT_BCN_BLOCKED, &iport->flags),
- tmo);
- /* link down, stop polling */
- if (!test_bit(IPORT_BCN_BLOCKED, &iport->flags))
- break;
- dev_dbg(&ihost->pdev->dev,
- "%s: iport %p, iteration %d,"
- " phase %d: time_remaining %lu, bcns = %d\n",
- __func__, iport, iteration, phy_state,
- tmo, test_bit(IPORT_BCN_PENDING, &iport->flags));
-
- res = isci_smp_get_phy_attached_dev_type(ihost, dev, phy_num,
- &attached_device_type);
- tmo = deadline - jiffies;
-
- if (res) {
- dev_dbg(&ihost->pdev->dev,
- "%s: iteration %d, phase %d:"
- " SMP error=%d, time_remaining=%lu\n",
- __func__, iteration, phy_state, res, tmo);
- break;
- }
- dev_dbg(&ihost->pdev->dev,
- "%s: iport %p, iteration %d,"
- " phase %d: time_remaining %lu, bcns = %d, "
- "attdevtype = %x\n",
- __func__, iport, iteration, phy_state,
- tmo, test_bit(IPORT_BCN_PENDING, &iport->flags),
- attached_device_type);
-
- switch (phy_state) {
- case SMP_PHYWAIT_PHYDOWN:
- /* Has the device gone away? */
- if (!attached_device_type)
- phy_state = SMP_PHYWAIT_PHYUP;
-
- break;
-
- case SMP_PHYWAIT_PHYUP:
- /* Has the device come back? */
- if (attached_device_type)
- phy_state = SMP_PHYWAIT_DONE;
- break;
-
- case SMP_PHYWAIT_DONE:
- break;
- }
+ /* "request_complete" is set if the task was being terminated. */
+ if (request_complete)
+ complete(request_complete);
- }
- dev_dbg(&ihost->pdev->dev, "%s: done\n", __func__);
+ /* The task management part completes last. */
+ if (tmf_complete)
+ complete(tmf_complete);
}
static int isci_reset_device(struct isci_host *ihost,
struct isci_remote_device *idev)
{
struct sas_phy *phy = sas_find_local_phy(idev->domain_dev);
- struct isci_port *iport = idev->isci_port;
enum sci_status status;
unsigned long flags;
int rc;
}
spin_unlock_irqrestore(&ihost->scic_lock, flags);
- /* Make sure all pending requests are able to be fully terminated. */
- isci_device_clear_reset_pending(ihost, idev);
-
- /* If this is a device on an expander, disable BCN processing. */
- if (!scsi_is_sas_phy_local(phy))
- set_bit(IPORT_BCN_BLOCKED, &iport->flags);
-
rc = sas_phy_reset(phy, true);
/* Terminate in-progress I/O now. */
status = sci_remote_device_reset_complete(idev);
spin_unlock_irqrestore(&ihost->scic_lock, flags);
- /* If this is a device on an expander, bring the phy back up. */
- if (!scsi_is_sas_phy_local(phy)) {
- /* A phy reset will cause the device to go away then reappear.
- * Since libsas will take action on incoming BCNs (eg. remove
- * a device going through an SMP phy-control driven reset),
- * we need to wait until the phy comes back up before letting
- * discovery proceed in libsas.
- */
- isci_wait_for_smp_phy_reset(idev, phy->number);
-
- spin_lock_irqsave(&ihost->scic_lock, flags);
- isci_port_bcn_enable(ihost, idev->isci_port);
- spin_unlock_irqrestore(&ihost->scic_lock, flags);
- }
-
if (status != SCI_SUCCESS) {
dev_dbg(&ihost->pdev->dev,
"%s: sci_remote_device_reset_complete(%p) "
#include <scsi/sas_ata.h>
#include "host.h"
+#define ISCI_TERMINATION_TIMEOUT_MSEC 500
+
struct isci_request;
/**
isci_perform_error_io_completion /* Use sas_task_abort */
};
-static inline void isci_set_task_doneflags(
- struct sas_task *task)
-{
- /* Since no futher action will be taken on this task,
- * make sure to mark it complete from the lldd perspective.
- */
- task->task_state_flags |= SAS_TASK_STATE_DONE;
- task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
- task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
-}
-/**
- * isci_task_all_done() - This function clears the task bits to indicate the
- * LLDD is done with the task.
- *
- *
- */
-static inline void isci_task_all_done(
- struct sas_task *task)
-{
- unsigned long flags;
-
- /* Since no futher action will be taken on this task,
- * make sure to mark it complete from the lldd perspective.
- */
- spin_lock_irqsave(&task->task_state_lock, flags);
- isci_set_task_doneflags(task);
- spin_unlock_irqrestore(&task->task_state_lock, flags);
-}
-
/**
* isci_task_set_completion_status() - This function sets the completion status
* for the request.
/* Fall through to the normal case... */
case isci_perform_normal_io_completion:
/* Normal notification (task_done) */
- isci_set_task_doneflags(task);
+ task->task_state_flags |= SAS_TASK_STATE_DONE;
+ task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR |
+ SAS_TASK_STATE_PENDING);
break;
default:
WARN_ONCE(1, "unknown task_notification_selection: %d\n",
#include <linux/delay.h>
#include <linux/kfifo.h>
#include <linux/scatterlist.h>
+#include <linux/module.h>
#include <net/tcp.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <linux/timer.h>
#include <linux/slab.h>
#include <linux/err.h>
+#include <linux/export.h>
#include <asm/unaligned.h>
#include <scsi/fc/fc_gs.h>
* Provide interface to send ELS/CT FC frames
*/
+#include <linux/export.h>
#include <asm/unaligned.h>
#include <scsi/fc/fc_gs.h>
#include <scsi/fc/fc_ns.h>
#include <linux/timer.h>
#include <linux/slab.h>
#include <linux/err.h>
+#include <linux/export.h>
#include <scsi/fc/fc_fc2.h>
struct fc_frame_header *fh = fc_frame_header_get(fp);
int error;
u32 f_ctl;
+ u8 fh_type = fh->fh_type;
ep = fc_seq_exch(sp);
WARN_ON((ep->esb_stat & ESB_ST_SEQ_INIT) != ESB_ST_SEQ_INIT);
*/
error = lport->tt.frame_send(lport, fp);
- if (fh->fh_type == FC_TYPE_BLS)
+ if (fh_type == FC_TYPE_BLS)
return error;
/*
goto restart;
}
}
+ pool->next_index = 0;
+ pool->left = FC_XID_UNKNOWN;
+ pool->right = FC_XID_UNKNOWN;
spin_unlock_bh(&pool->lock);
}
goto free_mempool;
for_each_possible_cpu(cpu) {
pool = per_cpu_ptr(mp->pool, cpu);
+ pool->next_index = 0;
pool->left = FC_XID_UNKNOWN;
pool->right = FC_XID_UNKNOWN;
spin_lock_init(&pool->lock);
#include <linux/types.h>
#include <linux/scatterlist.h>
#include <linux/crc32.h>
+#include <linux/module.h>
#include <scsi/libfc.h>
#include <scsi/fc_encode.h>
#include <linux/timer.h>
#include <linux/delay.h>
+#include <linux/module.h>
#include <linux/slab.h>
#include <asm/unaligned.h>
FCH_EVT_LIPRESET, 0);
fc_vports_linkchange(lport);
fc_lport_reset_locked(lport);
- if (lport->link_up) {
- /*
- * Wait upto resource allocation time out before
- * doing re-login since incomplete FIP exchanged
- * from last session may collide with exchanges
- * in new session.
- */
- msleep(lport->r_a_tov);
+ if (lport->link_up)
fc_lport_enter_flogi(lport);
- }
}
/**
void *lp_arg)
{
struct fc_lport *lport = lp_arg;
+ struct fc_frame_header *fh;
struct fc_els_flogi *flp;
u32 did;
u16 csp_flags;
goto err;
}
+ fh = fc_frame_header_get(fp);
did = fc_frame_did(fp);
- if (fc_frame_payload_op(fp) == ELS_LS_ACC && did) {
- flp = fc_frame_payload_get(fp, sizeof(*flp));
- if (flp) {
- mfs = ntohs(flp->fl_csp.sp_bb_data) &
- FC_SP_BB_DATA_MASK;
- if (mfs >= FC_SP_MIN_MAX_PAYLOAD &&
- mfs < lport->mfs)
- lport->mfs = mfs;
- csp_flags = ntohs(flp->fl_csp.sp_features);
- r_a_tov = ntohl(flp->fl_csp.sp_r_a_tov);
- e_d_tov = ntohl(flp->fl_csp.sp_e_d_tov);
- if (csp_flags & FC_SP_FT_EDTR)
- e_d_tov /= 1000000;
-
- lport->npiv_enabled = !!(csp_flags & FC_SP_FT_NPIV_ACC);
-
- if ((csp_flags & FC_SP_FT_FPORT) == 0) {
- if (e_d_tov > lport->e_d_tov)
- lport->e_d_tov = e_d_tov;
- lport->r_a_tov = 2 * e_d_tov;
- fc_lport_set_port_id(lport, did, fp);
- printk(KERN_INFO "host%d: libfc: "
- "Port (%6.6x) entered "
- "point-to-point mode\n",
- lport->host->host_no, did);
- fc_lport_ptp_setup(lport, fc_frame_sid(fp),
- get_unaligned_be64(
- &flp->fl_wwpn),
- get_unaligned_be64(
- &flp->fl_wwnn));
- } else {
- lport->e_d_tov = e_d_tov;
- lport->r_a_tov = r_a_tov;
- fc_host_fabric_name(lport->host) =
- get_unaligned_be64(&flp->fl_wwnn);
- fc_lport_set_port_id(lport, did, fp);
- fc_lport_enter_dns(lport);
- }
- }
- } else {
- FC_LPORT_DBG(lport, "FLOGI RJT or bad response\n");
+ if (fh->fh_r_ctl != FC_RCTL_ELS_REP || did == 0 ||
+ fc_frame_payload_op(fp) != ELS_LS_ACC) {
+ FC_LPORT_DBG(lport, "FLOGI not accepted or bad response\n");
fc_lport_error(lport, fp);
+ goto err;
+ }
+
+ flp = fc_frame_payload_get(fp, sizeof(*flp));
+ if (!flp) {
+ FC_LPORT_DBG(lport, "FLOGI bad response\n");
+ fc_lport_error(lport, fp);
+ goto err;
+ }
+
+ mfs = ntohs(flp->fl_csp.sp_bb_data) &
+ FC_SP_BB_DATA_MASK;
+ if (mfs >= FC_SP_MIN_MAX_PAYLOAD &&
+ mfs < lport->mfs)
+ lport->mfs = mfs;
+ csp_flags = ntohs(flp->fl_csp.sp_features);
+ r_a_tov = ntohl(flp->fl_csp.sp_r_a_tov);
+ e_d_tov = ntohl(flp->fl_csp.sp_e_d_tov);
+ if (csp_flags & FC_SP_FT_EDTR)
+ e_d_tov /= 1000000;
+
+ lport->npiv_enabled = !!(csp_flags & FC_SP_FT_NPIV_ACC);
+
+ if ((csp_flags & FC_SP_FT_FPORT) == 0) {
+ if (e_d_tov > lport->e_d_tov)
+ lport->e_d_tov = e_d_tov;
+ lport->r_a_tov = 2 * e_d_tov;
+ fc_lport_set_port_id(lport, did, fp);
+ printk(KERN_INFO "host%d: libfc: "
+ "Port (%6.6x) entered "
+ "point-to-point mode\n",
+ lport->host->host_no, did);
+ fc_lport_ptp_setup(lport, fc_frame_sid(fp),
+ get_unaligned_be64(
+ &flp->fl_wwpn),
+ get_unaligned_be64(
+ &flp->fl_wwnn));
+ } else {
+ lport->e_d_tov = e_d_tov;
+ lport->r_a_tov = r_a_tov;
+ fc_host_fabric_name(lport->host) =
+ get_unaligned_be64(&flp->fl_wwnn);
+ fc_lport_set_port_id(lport, did, fp);
+ fc_lport_enter_dns(lport);
}
out:
*/
#include <scsi/libfc.h>
+#include <linux/export.h>
/**
* fc_vport_create() - Create a new NPIV vport instance
#include <linux/rcupdate.h>
#include <linux/timer.h>
#include <linux/workqueue.h>
+#include <linux/export.h>
#include <asm/unaligned.h>
#include <scsi/libfc.h>
#include <linux/delay.h>
#include <linux/log2.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <asm/unaligned.h>
#include <net/tcp.h>
#include <scsi/scsi_cmnd.h>
#include <linux/delay.h>
#include <linux/kfifo.h>
#include <linux/scatterlist.h>
+#include <linux/module.h>
#include <net/tcp.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <linux/scatterlist.h>
#include <linux/blkdev.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include "sas_internal.h"
#include <linux/kthread.h>
#include <linux/firmware.h>
+#include <linux/export.h>
#include <linux/ctype.h>
#include "sas_internal.h"
#include <linux/kernel.h>
+#include <linux/export.h>
#include <scsi/sas.h>
#include <scsi/libsas.h>
#include <linux/kfifo.h>
#include <linux/scatterlist.h>
#include <linux/dma-mapping.h>
+#include <linux/module.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_tcq.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <linux/aer.h>
#include <linux/gfp.h>
#include <linux/kernel.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
+#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <linux/idr.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/idr.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <linux/kthread.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
+#include <linux/export.h>
#include <linux/delay.h>
#include <asm/unaligned.h>
#include <linux/stat.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <asm/dbdma.h>
#include <asm/io.h>
#include <asm/pgtable.h>
*/
#include <linux/slab.h>
+#include <linux/module.h>
#include "megaraid_mbox.h"
static int megaraid_init(void);
/*
- * Copyright (c) 2000-2010 LSI Corporation.
+ * Copyright (c) 2000-2011 LSI Corporation.
*
*
* Name: mpi2.h
* scatter/gather formats.
* Creation Date: June 21, 2006
*
- * mpi2.h Version: 02.00.18
+ * mpi2.h Version: 02.00.20
*
* Version History
* ---------------
* 08-11-10 02.00.17 Bumped MPI2_HEADER_VERSION_UNIT.
* 11-10-10 02.00.18 Bumped MPI2_HEADER_VERSION_UNIT.
* Added MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR define.
+ * 02-23-11 02.00.19 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Added MPI2_FUNCTION_SEND_HOST_MESSAGE.
+ * 03-09-11 02.00.20 Bumped MPI2_HEADER_VERSION_UNIT.
* --------------------------------------------------------------------------
*/
#define MPI2_VERSION_02_00 (0x0200)
/* versioning for this MPI header set */
-#define MPI2_HEADER_VERSION_UNIT (0x12)
+#define MPI2_HEADER_VERSION_UNIT (0x14)
#define MPI2_HEADER_VERSION_DEV (0x00)
#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00)
#define MPI2_HEADER_VERSION_UNIT_SHIFT (8)
#define MPI2_FUNCTION_HOST_BASED_DISCOVERY_ACTION (0x2F)
/* Power Management Control */
#define MPI2_FUNCTION_PWR_MGMT_CONTROL (0x30)
+/* Send Host Message */
+#define MPI2_FUNCTION_SEND_HOST_MESSAGE (0x31)
/* beginning of product-specific range */
#define MPI2_FUNCTION_MIN_PRODUCT_SPECIFIC (0xF0)
/* end of product-specific range */
/*
- * Copyright (c) 2000-2010 LSI Corporation.
+ * Copyright (c) 2000-2011 LSI Corporation.
*
*
* Name: mpi2_cnfg.h
* Title: MPI Configuration messages and pages
* Creation Date: November 10, 2006
*
- * mpi2_cnfg.h Version: 02.00.17
+ * mpi2_cnfg.h Version: 02.00.19
*
* Version History
* ---------------
* to MPI2_CONFIG_PAGE_IO_UNIT_7.
* Added MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING define
* and MPI2_CONFIG_PAGE_EXT_MAN_PS structure.
+ * 02-23-11 02.00.18 Added ProxyVF_ID field to MPI2_CONFIG_REQUEST.
+ * Added IO Unit Page 8, IO Unit Page 9,
+ * and IO Unit Page 10.
+ * Added SASNotifyPrimitiveMasks field to
+ * MPI2_CONFIG_PAGE_IOC_7.
+ * 03-09-11 02.00.19 Fixed IO Unit Page 10 (to match the spec).
* --------------------------------------------------------------------------
*/
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved1; /* 0x0A */
- U32 Reserved2; /* 0x0C */
+ U8 Reserved2; /* 0x0C */
+ U8 ProxyVF_ID; /* 0x0D */
+ U16 Reserved4; /* 0x0E */
U32 Reserved3; /* 0x10 */
MPI2_CONFIG_PAGE_HEADER Header; /* 0x14 */
U32 PageAddress; /* 0x18 */
#define MPI2_IOUNITPAGE7_BOARD_TEMP_FAHRENHEIT (0x01)
#define MPI2_IOUNITPAGE7_BOARD_TEMP_CELSIUS (0x02)
+/* IO Unit Page 8 */
+
+#define MPI2_IOUNIT8_NUM_THRESHOLDS (4)
+
+typedef struct _MPI2_IOUNIT8_SENSOR {
+ U16 Flags; /* 0x00 */
+ U16 Reserved1; /* 0x02 */
+ U16
+ Threshold[MPI2_IOUNIT8_NUM_THRESHOLDS]; /* 0x04 */
+ U32 Reserved2; /* 0x0C */
+ U32 Reserved3; /* 0x10 */
+ U32 Reserved4; /* 0x14 */
+} MPI2_IOUNIT8_SENSOR, MPI2_POINTER PTR_MPI2_IOUNIT8_SENSOR,
+Mpi2IOUnit8Sensor_t, MPI2_POINTER pMpi2IOUnit8Sensor_t;
+
+/* defines for IO Unit Page 8 Sensor Flags field */
+#define MPI2_IOUNIT8_SENSOR_FLAGS_T3_ENABLE (0x0008)
+#define MPI2_IOUNIT8_SENSOR_FLAGS_T2_ENABLE (0x0004)
+#define MPI2_IOUNIT8_SENSOR_FLAGS_T1_ENABLE (0x0002)
+#define MPI2_IOUNIT8_SENSOR_FLAGS_T0_ENABLE (0x0001)
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check the value returned for NumSensors at runtime.
+ */
+#ifndef MPI2_IOUNITPAGE8_SENSOR_ENTRIES
+#define MPI2_IOUNITPAGE8_SENSOR_ENTRIES (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_8 {
+ MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
+ U32 Reserved1; /* 0x04 */
+ U32 Reserved2; /* 0x08 */
+ U8 NumSensors; /* 0x0C */
+ U8 PollingInterval; /* 0x0D */
+ U16 Reserved3; /* 0x0E */
+ MPI2_IOUNIT8_SENSOR
+ Sensor[MPI2_IOUNITPAGE8_SENSOR_ENTRIES];/* 0x10 */
+} MPI2_CONFIG_PAGE_IO_UNIT_8, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_8,
+Mpi2IOUnitPage8_t, MPI2_POINTER pMpi2IOUnitPage8_t;
+
+#define MPI2_IOUNITPAGE8_PAGEVERSION (0x00)
+
+
+/* IO Unit Page 9 */
+
+typedef struct _MPI2_IOUNIT9_SENSOR {
+ U16 CurrentTemperature; /* 0x00 */
+ U16 Reserved1; /* 0x02 */
+ U8 Flags; /* 0x04 */
+ U8 Reserved2; /* 0x05 */
+ U16 Reserved3; /* 0x06 */
+ U32 Reserved4; /* 0x08 */
+ U32 Reserved5; /* 0x0C */
+} MPI2_IOUNIT9_SENSOR, MPI2_POINTER PTR_MPI2_IOUNIT9_SENSOR,
+Mpi2IOUnit9Sensor_t, MPI2_POINTER pMpi2IOUnit9Sensor_t;
+
+/* defines for IO Unit Page 9 Sensor Flags field */
+#define MPI2_IOUNIT9_SENSOR_FLAGS_TEMP_VALID (0x01)
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check the value returned for NumSensors at runtime.
+ */
+#ifndef MPI2_IOUNITPAGE9_SENSOR_ENTRIES
+#define MPI2_IOUNITPAGE9_SENSOR_ENTRIES (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_9 {
+ MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
+ U32 Reserved1; /* 0x04 */
+ U32 Reserved2; /* 0x08 */
+ U8 NumSensors; /* 0x0C */
+ U8 Reserved4; /* 0x0D */
+ U16 Reserved3; /* 0x0E */
+ MPI2_IOUNIT9_SENSOR
+ Sensor[MPI2_IOUNITPAGE9_SENSOR_ENTRIES];/* 0x10 */
+} MPI2_CONFIG_PAGE_IO_UNIT_9, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_9,
+Mpi2IOUnitPage9_t, MPI2_POINTER pMpi2IOUnitPage9_t;
+
+#define MPI2_IOUNITPAGE9_PAGEVERSION (0x00)
+
+
+/* IO Unit Page 10 */
+
+typedef struct _MPI2_IOUNIT10_FUNCTION {
+ U8 CreditPercent; /* 0x00 */
+ U8 Reserved1; /* 0x01 */
+ U16 Reserved2; /* 0x02 */
+} MPI2_IOUNIT10_FUNCTION, MPI2_POINTER PTR_MPI2_IOUNIT10_FUNCTION,
+Mpi2IOUnit10Function_t, MPI2_POINTER pMpi2IOUnit10Function_t;
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check the value returned for NumFunctions at runtime.
+ */
+#ifndef MPI2_IOUNITPAGE10_FUNCTION_ENTRIES
+#define MPI2_IOUNITPAGE10_FUNCTION_ENTRIES (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_10 {
+ MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
+ U8 NumFunctions; /* 0x04 */
+ U8 Reserved1; /* 0x05 */
+ U16 Reserved2; /* 0x06 */
+ U32 Reserved3; /* 0x08 */
+ U32 Reserved4; /* 0x0C */
+ MPI2_IOUNIT10_FUNCTION
+ Function[MPI2_IOUNITPAGE10_FUNCTION_ENTRIES];/* 0x10 */
+} MPI2_CONFIG_PAGE_IO_UNIT_10, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_10,
+Mpi2IOUnitPage10_t, MPI2_POINTER pMpi2IOUnitPage10_t;
+
+#define MPI2_IOUNITPAGE10_PAGEVERSION (0x01)
+
/****************************************************************************
U32 Reserved1; /* 0x04 */
U32 EventMasks[MPI2_IOCPAGE7_EVENTMASK_WORDS];/* 0x08 */
U16 SASBroadcastPrimitiveMasks; /* 0x18 */
- U16 Reserved2; /* 0x1A */
+ U16 SASNotifyPrimitiveMasks; /* 0x1A */
U32 Reserved3; /* 0x1C */
} MPI2_CONFIG_PAGE_IOC_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_7,
Mpi2IOCPage7_t, MPI2_POINTER pMpi2IOCPage7_t;
-#define MPI2_IOCPAGE7_PAGEVERSION (0x01)
+#define MPI2_IOCPAGE7_PAGEVERSION (0x02)
/* IOC Page 8 */
#define MPI2_SASIOUNITPAGE8_PAGEVERSION (0x00)
/* defines for PowerManagementCapabilities field */
-#define MPI2_SASIOUNIT8_PM_HOST_PORT_WIDTH_MOD (0x000001000)
-#define MPI2_SASIOUNIT8_PM_HOST_SAS_SLUMBER_MODE (0x000000800)
-#define MPI2_SASIOUNIT8_PM_HOST_SAS_PARTIAL_MODE (0x000000400)
-#define MPI2_SASIOUNIT8_PM_HOST_SATA_SLUMBER_MODE (0x000000200)
-#define MPI2_SASIOUNIT8_PM_HOST_SATA_PARTIAL_MODE (0x000000100)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_PORT_WIDTH_MOD (0x000000010)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_SLUMBER_MODE (0x000000008)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_PARTIAL_MODE (0x000000004)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_SLUMBER_MODE (0x000000002)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_PARTIAL_MODE (0x000000001)
+#define MPI2_SASIOUNIT8_PM_HOST_PORT_WIDTH_MOD (0x00001000)
+#define MPI2_SASIOUNIT8_PM_HOST_SAS_SLUMBER_MODE (0x00000800)
+#define MPI2_SASIOUNIT8_PM_HOST_SAS_PARTIAL_MODE (0x00000400)
+#define MPI2_SASIOUNIT8_PM_HOST_SATA_SLUMBER_MODE (0x00000200)
+#define MPI2_SASIOUNIT8_PM_HOST_SATA_PARTIAL_MODE (0x00000100)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_PORT_WIDTH_MOD (0x00000010)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_SLUMBER_MODE (0x00000008)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_PARTIAL_MODE (0x00000004)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_SLUMBER_MODE (0x00000002)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_PARTIAL_MODE (0x00000001)
/* see mpi2_sas.h for values for SAS Device Page 0 DeviceInfo values */
/* values for SAS Device Page 0 Flags field */
+#define MPI2_SAS_DEVICE0_FLAGS_UNAUTHORIZED_DEVICE (0x8000)
#define MPI2_SAS_DEVICE0_FLAGS_SLUMBER_PM_CAPABLE (0x1000)
#define MPI2_SAS_DEVICE0_FLAGS_PARTIAL_PM_CAPABLE (0x0800)
#define MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY (0x0400)
/*
- * Copyright (c) 2000-2010 LSI Corporation.
+ * Copyright (c) 2000-2011 LSI Corporation.
*
*
* Name: mpi2_ioc.h
* Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
* Creation Date: October 11, 2006
*
- * mpi2_ioc.h Version: 02.00.16
+ * mpi2_ioc.h Version: 02.00.17
*
* Version History
* ---------------
* 05-12-10 02.00.15 Marked Task Set Full Event as obsolete.
* Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define.
* 11-10-10 02.00.16 Added MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC.
+ * 02-23-11 02.00.17 Added SAS NOTIFY Primitive event, and added
+ * SASNotifyPrimitiveMasks field to
+ * MPI2_EVENT_NOTIFICATION_REQUEST.
+ * Added Temperature Threshold Event.
+ * Added Host Message Event.
+ * Added Send Host Message request and reply.
* --------------------------------------------------------------------------
*/
U32 Reserved6; /* 0x10 */
U32 EventMasks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];/* 0x14 */
U16 SASBroadcastPrimitiveMasks; /* 0x24 */
- U16 Reserved7; /* 0x26 */
+ U16 SASNotifyPrimitiveMasks; /* 0x26 */
U32 Reserved8; /* 0x28 */
} MPI2_EVENT_NOTIFICATION_REQUEST,
MPI2_POINTER PTR_MPI2_EVENT_NOTIFICATION_REQUEST,
#define MPI2_EVENT_GPIO_INTERRUPT (0x0023)
#define MPI2_EVENT_HOST_BASED_DISCOVERY_PHY (0x0024)
#define MPI2_EVENT_SAS_QUIESCE (0x0025)
+#define MPI2_EVENT_SAS_NOTIFY_PRIMITIVE (0x0026)
+#define MPI2_EVENT_TEMP_THRESHOLD (0x0027)
+#define MPI2_EVENT_HOST_MESSAGE (0x0028)
/* Log Entry Added Event data */
MPI2_POINTER PTR_MPI2_EVENT_DATA_GPIO_INTERRUPT,
Mpi2EventDataGpioInterrupt_t, MPI2_POINTER pMpi2EventDataGpioInterrupt_t;
+/* Temperature Threshold Event data */
+
+typedef struct _MPI2_EVENT_DATA_TEMPERATURE {
+ U16 Status; /* 0x00 */
+ U8 SensorNum; /* 0x02 */
+ U8 Reserved1; /* 0x03 */
+ U16 CurrentTemperature; /* 0x04 */
+ U16 Reserved2; /* 0x06 */
+ U32 Reserved3; /* 0x08 */
+ U32 Reserved4; /* 0x0C */
+} MPI2_EVENT_DATA_TEMPERATURE,
+MPI2_POINTER PTR_MPI2_EVENT_DATA_TEMPERATURE,
+Mpi2EventDataTemperature_t, MPI2_POINTER pMpi2EventDataTemperature_t;
+
+/* Temperature Threshold Event data Status bits */
+#define MPI2_EVENT_TEMPERATURE3_EXCEEDED (0x0008)
+#define MPI2_EVENT_TEMPERATURE2_EXCEEDED (0x0004)
+#define MPI2_EVENT_TEMPERATURE1_EXCEEDED (0x0002)
+#define MPI2_EVENT_TEMPERATURE0_EXCEEDED (0x0001)
+
+
+/* Host Message Event data */
+
+typedef struct _MPI2_EVENT_DATA_HOST_MESSAGE {
+ U8 SourceVF_ID; /* 0x00 */
+ U8 Reserved1; /* 0x01 */
+ U16 Reserved2; /* 0x02 */
+ U32 Reserved3; /* 0x04 */
+ U32 HostData[1]; /* 0x08 */
+} MPI2_EVENT_DATA_HOST_MESSAGE, MPI2_POINTER PTR_MPI2_EVENT_DATA_HOST_MESSAGE,
+Mpi2EventDataHostMessage_t, MPI2_POINTER pMpi2EventDataHostMessage_t;
+
+
/* Hard Reset Received Event data */
typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED
#define MPI2_EVENT_PRIMITIVE_CHANGE0_RESERVED (0x07)
#define MPI2_EVENT_PRIMITIVE_CHANGE1_RESERVED (0x08)
+/* SAS Notify Primitive Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE {
+ U8 PhyNum; /* 0x00 */
+ U8 Port; /* 0x01 */
+ U8 Reserved1; /* 0x02 */
+ U8 Primitive; /* 0x03 */
+} MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE,
+MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE,
+Mpi2EventDataSasNotifyPrimitive_t,
+MPI2_POINTER pMpi2EventDataSasNotifyPrimitive_t;
+
+/* defines for the Primitive field */
+#define MPI2_EVENT_NOTIFY_ENABLE_SPINUP (0x01)
+#define MPI2_EVENT_NOTIFY_POWER_LOSS_EXPECTED (0x02)
+#define MPI2_EVENT_NOTIFY_RESERVED1 (0x03)
+#define MPI2_EVENT_NOTIFY_RESERVED2 (0x04)
+
/* SAS Initiator Device Status Change Event data */
Mpi2EventAckReply_t, MPI2_POINTER pMpi2EventAckReply_t;
+/****************************************************************************
+* SendHostMessage message
+****************************************************************************/
+
+/* SendHostMessage Request message */
+typedef struct _MPI2_SEND_HOST_MESSAGE_REQUEST {
+ U16 HostDataLength; /* 0x00 */
+ U8 ChainOffset; /* 0x02 */
+ U8 Function; /* 0x03 */
+ U16 Reserved1; /* 0x04 */
+ U8 Reserved2; /* 0x06 */
+ U8 MsgFlags; /* 0x07 */
+ U8 VP_ID; /* 0x08 */
+ U8 VF_ID; /* 0x09 */
+ U16 Reserved3; /* 0x0A */
+ U8 Reserved4; /* 0x0C */
+ U8 DestVF_ID; /* 0x0D */
+ U16 Reserved5; /* 0x0E */
+ U32 Reserved6; /* 0x10 */
+ U32 Reserved7; /* 0x14 */
+ U32 Reserved8; /* 0x18 */
+ U32 Reserved9; /* 0x1C */
+ U32 Reserved10; /* 0x20 */
+ U32 HostData[1]; /* 0x24 */
+} MPI2_SEND_HOST_MESSAGE_REQUEST,
+MPI2_POINTER PTR_MPI2_SEND_HOST_MESSAGE_REQUEST,
+Mpi2SendHostMessageRequest_t, MPI2_POINTER pMpi2SendHostMessageRequest_t;
+
+
+/* SendHostMessage Reply message */
+typedef struct _MPI2_SEND_HOST_MESSAGE_REPLY {
+ U16 HostDataLength; /* 0x00 */
+ U8 MsgLength; /* 0x02 */
+ U8 Function; /* 0x03 */
+ U16 Reserved1; /* 0x04 */
+ U8 Reserved2; /* 0x06 */
+ U8 MsgFlags; /* 0x07 */
+ U8 VP_ID; /* 0x08 */
+ U8 VF_ID; /* 0x09 */
+ U16 Reserved3; /* 0x0A */
+ U16 Reserved4; /* 0x0C */
+ U16 IOCStatus; /* 0x0E */
+ U32 IOCLogInfo; /* 0x10 */
+} MPI2_SEND_HOST_MESSAGE_REPLY, MPI2_POINTER PTR_MPI2_SEND_HOST_MESSAGE_REPLY,
+Mpi2SendHostMessageReply_t, MPI2_POINTER pMpi2SendHostMessageReply_t;
+
+
/****************************************************************************
* FWDownload message
****************************************************************************/
module_param_array(missing_delay, int, NULL, 0);
MODULE_PARM_DESC(missing_delay, " device missing delay , io missing delay");
+static int mpt2sas_fwfault_debug;
+MODULE_PARM_DESC(mpt2sas_fwfault_debug, " enable detection of firmware fault "
+ "and halt firmware - (default=0)");
+
+static int disable_discovery = -1;
+module_param(disable_discovery, int, 0);
+MODULE_PARM_DESC(disable_discovery, " disable discovery ");
+
+
/* diag_buffer_enable is bitwise
* bit 0 set = TRACE
* bit 1 set = SNAPSHOT
MODULE_PARM_DESC(diag_buffer_enable, " post diag buffers "
"(TRACE=1/SNAPSHOT=2/EXTENDED=4/default=0)");
-static int mpt2sas_fwfault_debug;
-MODULE_PARM_DESC(mpt2sas_fwfault_debug, " enable detection of firmware fault "
- "and halt firmware - (default=0)");
-
-static int disable_discovery = -1;
-module_param(disable_discovery, int, 0);
-MODULE_PARM_DESC(disable_discovery, " disable discovery ");
-
/**
* _scsih_set_fwfault_debug - global setting of ioc->fwfault_debug.
*
memcpy(ioc->base_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
}
ioc->base_cmds.status &= ~MPT2_CMD_PENDING;
+
complete(&ioc->base_cmds.done);
return 1;
}
return 0;
}
+/**
+ * mpt2sas_port_enable_done - command completion routine for port enable
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ *
+ * Return 1 meaning mf should be freed from _base_interrupt
+ * 0 means the mf is freed from this function.
+ */
+u8
+mpt2sas_port_enable_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+ u32 reply)
+{
+ MPI2DefaultReply_t *mpi_reply;
+ u16 ioc_status;
+
+ mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
+ if (mpi_reply && mpi_reply->Function == MPI2_FUNCTION_EVENT_ACK)
+ return 1;
+
+ if (ioc->port_enable_cmds.status == MPT2_CMD_NOT_USED)
+ return 1;
+
+ ioc->port_enable_cmds.status |= MPT2_CMD_COMPLETE;
+ if (mpi_reply) {
+ ioc->port_enable_cmds.status |= MPT2_CMD_REPLY_VALID;
+ memcpy(ioc->port_enable_cmds.reply, mpi_reply,
+ mpi_reply->MsgLength*4);
+ }
+ ioc->port_enable_cmds.status &= ~MPT2_CMD_PENDING;
+
+ ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
+
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+ ioc->port_enable_failed = 1;
+
+ if (ioc->is_driver_loading) {
+ if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
+ mpt2sas_port_enable_complete(ioc);
+ return 1;
+ } else {
+ ioc->start_scan_failed = ioc_status;
+ ioc->start_scan = 0;
+ return 1;
+ }
+ }
+ complete(&ioc->port_enable_cmds.done);
+ return 1;
+}
+
+
/**
* _base_send_port_enable - send port_enable(discovery stuff) to firmware
* @ioc: per adapter object
_base_send_port_enable(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
{
Mpi2PortEnableRequest_t *mpi_request;
- u32 ioc_state;
+ Mpi2PortEnableReply_t *mpi_reply;
unsigned long timeleft;
int r = 0;
u16 smid;
+ u16 ioc_status;
printk(MPT2SAS_INFO_FMT "sending port enable !!\n", ioc->name);
- if (ioc->base_cmds.status & MPT2_CMD_PENDING) {
+ if (ioc->port_enable_cmds.status & MPT2_CMD_PENDING) {
printk(MPT2SAS_ERR_FMT "%s: internal command already in use\n",
ioc->name, __func__);
return -EAGAIN;
}
- smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx);
+ smid = mpt2sas_base_get_smid(ioc, ioc->port_enable_cb_idx);
if (!smid) {
printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
ioc->name, __func__);
return -EAGAIN;
}
- ioc->base_cmds.status = MPT2_CMD_PENDING;
+ ioc->port_enable_cmds.status = MPT2_CMD_PENDING;
mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
- ioc->base_cmds.smid = smid;
+ ioc->port_enable_cmds.smid = smid;
memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t));
mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE;
- mpi_request->VF_ID = 0; /* TODO */
- mpi_request->VP_ID = 0;
+ init_completion(&ioc->port_enable_cmds.done);
mpt2sas_base_put_smid_default(ioc, smid);
- init_completion(&ioc->base_cmds.done);
- timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
+ timeleft = wait_for_completion_timeout(&ioc->port_enable_cmds.done,
300*HZ);
- if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) {
+ if (!(ioc->port_enable_cmds.status & MPT2_CMD_COMPLETE)) {
printk(MPT2SAS_ERR_FMT "%s: timeout\n",
ioc->name, __func__);
_debug_dump_mf(mpi_request,
sizeof(Mpi2PortEnableRequest_t)/4);
- if (ioc->base_cmds.status & MPT2_CMD_RESET)
+ if (ioc->port_enable_cmds.status & MPT2_CMD_RESET)
r = -EFAULT;
else
r = -ETIME;
goto out;
- } else
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: complete\n",
- ioc->name, __func__));
+ }
+ mpi_reply = ioc->port_enable_cmds.reply;
- ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_OPERATIONAL,
- 60, sleep_flag);
- if (ioc_state) {
- printk(MPT2SAS_ERR_FMT "%s: failed going to operational state "
- " (ioc_state=0x%x)\n", ioc->name, __func__, ioc_state);
+ ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ printk(MPT2SAS_ERR_FMT "%s: failed with (ioc_status=0x%08x)\n",
+ ioc->name, __func__, ioc_status);
r = -EFAULT;
+ goto out;
}
out:
- ioc->base_cmds.status = MPT2_CMD_NOT_USED;
- printk(MPT2SAS_INFO_FMT "port enable: %s\n",
- ioc->name, ((r == 0) ? "SUCCESS" : "FAILED"));
+ ioc->port_enable_cmds.status = MPT2_CMD_NOT_USED;
+ printk(MPT2SAS_INFO_FMT "port enable: %s\n", ioc->name, ((r == 0) ?
+ "SUCCESS" : "FAILED"));
return r;
}
+/**
+ * mpt2sas_port_enable - initiate firmware discovery (don't wait for reply)
+ * @ioc: per adapter object
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt2sas_port_enable(struct MPT2SAS_ADAPTER *ioc)
+{
+ Mpi2PortEnableRequest_t *mpi_request;
+ u16 smid;
+
+ printk(MPT2SAS_INFO_FMT "sending port enable !!\n", ioc->name);
+
+ if (ioc->port_enable_cmds.status & MPT2_CMD_PENDING) {
+ printk(MPT2SAS_ERR_FMT "%s: internal command already in use\n",
+ ioc->name, __func__);
+ return -EAGAIN;
+ }
+
+ smid = mpt2sas_base_get_smid(ioc, ioc->port_enable_cb_idx);
+ if (!smid) {
+ printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
+ ioc->name, __func__);
+ return -EAGAIN;
+ }
+
+ ioc->port_enable_cmds.status = MPT2_CMD_PENDING;
+ mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
+ ioc->port_enable_cmds.smid = smid;
+ memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t));
+ mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE;
+
+ mpt2sas_base_put_smid_default(ioc, smid);
+ return 0;
+}
+
+/**
+ * _base_determine_wait_on_discovery - desposition
+ * @ioc: per adapter object
+ *
+ * Decide whether to wait on discovery to complete. Used to either
+ * locate boot device, or report volumes ahead of physical devices.
+ *
+ * Returns 1 for wait, 0 for don't wait
+ */
+static int
+_base_determine_wait_on_discovery(struct MPT2SAS_ADAPTER *ioc)
+{
+ /* We wait for discovery to complete if IR firmware is loaded.
+ * The sas topology events arrive before PD events, so we need time to
+ * turn on the bit in ioc->pd_handles to indicate PD
+ * Also, it maybe required to report Volumes ahead of physical
+ * devices when MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING is set.
+ */
+ if (ioc->ir_firmware)
+ return 1;
+
+ /* if no Bios, then we don't need to wait */
+ if (!ioc->bios_pg3.BiosVersion)
+ return 0;
+
+ /* Bios is present, then we drop down here.
+ *
+ * If there any entries in the Bios Page 2, then we wait
+ * for discovery to complete.
+ */
+
+ /* Current Boot Device */
+ if ((ioc->bios_pg2.CurrentBootDeviceForm &
+ MPI2_BIOSPAGE2_FORM_MASK) ==
+ MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED &&
+ /* Request Boot Device */
+ (ioc->bios_pg2.ReqBootDeviceForm &
+ MPI2_BIOSPAGE2_FORM_MASK) ==
+ MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED &&
+ /* Alternate Request Boot Device */
+ (ioc->bios_pg2.ReqAltBootDeviceForm &
+ MPI2_BIOSPAGE2_FORM_MASK) ==
+ MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED)
+ return 0;
+
+ return 1;
+}
+
+
/**
* _base_unmask_events - turn on notification for this event
* @ioc: per adapter object
skip_init_reply_post_host_index:
_base_unmask_interrupts(ioc);
+
r = _base_event_notification(ioc, sleep_flag);
if (r)
return r;
if (sleep_flag == CAN_SLEEP)
_base_static_config_pages(ioc);
- if (ioc->wait_for_port_enable_to_complete && ioc->is_warpdrive) {
+
+ if (ioc->is_driver_loading) {
+
+
+
+ ioc->wait_for_discovery_to_complete =
+ _base_determine_wait_on_discovery(ioc);
+ return r; /* scan_start and scan_finished support */
+ }
+
+
+ if (ioc->wait_for_discovery_to_complete && ioc->is_warpdrive) {
if (ioc->manu_pg10.OEMIdentifier == 0x80) {
hide_flag = (u8) (ioc->manu_pg10.OEMSpecificFlags0 &
MFG_PAGE10_HIDE_SSDS_MASK);
}
}
- if (ioc->wait_for_port_enable_to_complete) {
- if (diag_buffer_enable != 0)
- mpt2sas_enable_diag_buffer(ioc, diag_buffer_enable);
- if (disable_discovery > 0)
- return r;
- }
-
r = _base_send_port_enable(ioc, sleep_flag);
if (r)
return r;
ioc->base_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
ioc->base_cmds.status = MPT2_CMD_NOT_USED;
+ /* port_enable command bits */
+ ioc->port_enable_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+ ioc->port_enable_cmds.status = MPT2_CMD_NOT_USED;
+
/* transport internal command bits */
ioc->transport_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
ioc->transport_cmds.status = MPT2_CMD_NOT_USED;
goto out_free_resources;
}
- init_completion(&ioc->shost_recovery_done);
-
for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
ioc->event_masks[i] = -1;
_base_update_missing_delay(ioc, missing_delay[0],
missing_delay[1]);
- mpt2sas_base_start_watchdog(ioc);
return 0;
out_free_resources:
kfree(ioc->scsih_cmds.reply);
kfree(ioc->config_cmds.reply);
kfree(ioc->base_cmds.reply);
+ kfree(ioc->port_enable_cmds.reply);
kfree(ioc->ctl_cmds.reply);
kfree(ioc->ctl_cmds.sense);
kfree(ioc->pfacts);
kfree(ioc->ctl_cmds.reply);
kfree(ioc->ctl_cmds.sense);
kfree(ioc->base_cmds.reply);
+ kfree(ioc->port_enable_cmds.reply);
kfree(ioc->tm_cmds.reply);
kfree(ioc->transport_cmds.reply);
kfree(ioc->scsih_cmds.reply);
mpt2sas_base_free_smid(ioc, ioc->base_cmds.smid);
complete(&ioc->base_cmds.done);
}
+ if (ioc->port_enable_cmds.status & MPT2_CMD_PENDING) {
+ ioc->port_enable_failed = 1;
+ ioc->port_enable_cmds.status |= MPT2_CMD_RESET;
+ mpt2sas_base_free_smid(ioc, ioc->port_enable_cmds.smid);
+ if (ioc->is_driver_loading) {
+ ioc->start_scan_failed =
+ MPI2_IOCSTATUS_INTERNAL_ERROR;
+ ioc->start_scan = 0;
+ ioc->port_enable_cmds.status =
+ MPT2_CMD_NOT_USED;
+ } else
+ complete(&ioc->port_enable_cmds.done);
+
+ }
if (ioc->config_cmds.status & MPT2_CMD_PENDING) {
ioc->config_cmds.status |= MPT2_CMD_RESET;
mpt2sas_base_free_smid(ioc, ioc->config_cmds.smid);
{
int r;
unsigned long flags;
- u8 pe_complete = ioc->wait_for_port_enable_to_complete;
dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
__func__));
/* If this hard reset is called while port enable is active, then
* there is no reason to call make_ioc_operational
*/
- if (pe_complete) {
+ if (ioc->is_driver_loading && ioc->port_enable_failed) {
+ ioc->remove_host = 1;
r = -EFAULT;
goto out;
}
spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
ioc->ioc_reset_in_progress_status = r;
ioc->shost_recovery = 0;
- complete(&ioc->shost_recovery_done);
spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
mutex_unlock(&ioc->reset_in_progress_mutex);
#define MPT2SAS_DRIVER_NAME "mpt2sas"
#define MPT2SAS_AUTHOR "LSI Corporation <DL-MPTFusionLinux@lsi.com>"
#define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver"
-#define MPT2SAS_DRIVER_VERSION "09.100.00.01"
-#define MPT2SAS_MAJOR_VERSION 09
+#define MPT2SAS_DRIVER_VERSION "10.100.00.00"
+#define MPT2SAS_MAJOR_VERSION 10
#define MPT2SAS_MINOR_VERSION 100
#define MPT2SAS_BUILD_VERSION 00
-#define MPT2SAS_RELEASE_VERSION 01
+#define MPT2SAS_RELEASE_VERSION 00
/*
* Set MPT2SAS_SG_DEPTH value based on user input.
* @ignore_loginfos: ignore loginfos during task management
* @remove_host: flag for when driver unloads, to avoid sending dev resets
* @pci_error_recovery: flag to prevent ioc access until slot reset completes
- * @wait_for_port_enable_to_complete:
+ * @wait_for_discovery_to_complete: flag set at driver load time when
+ * waiting on reporting devices
+ * @is_driver_loading: flag set at driver load time
+ * @port_enable_failed: flag set when port enable has failed
+ * @start_scan: flag set from scan_start callback, cleared from _mpt2sas_fw_work
+ * @start_scan_failed: means port enable failed, return's the ioc_status
* @msix_enable: flag indicating msix is enabled
* @msix_vector_count: number msix vectors
* @cpu_msix_table: table for mapping cpus to msix index
u8 shost_recovery;
struct mutex reset_in_progress_mutex;
- struct completion shost_recovery_done;
spinlock_t ioc_reset_in_progress_lock;
u8 ioc_link_reset_in_progress;
- int ioc_reset_in_progress_status;
+ u8 ioc_reset_in_progress_status;
u8 ignore_loginfos;
u8 remove_host;
u8 pci_error_recovery;
- u8 wait_for_port_enable_to_complete;
+ u8 wait_for_discovery_to_complete;
+ struct completion port_enable_done;
+ u8 is_driver_loading;
+ u8 port_enable_failed;
+
+ u8 start_scan;
+ u16 start_scan_failed;
u8 msix_enable;
u16 msix_vector_count;
u8 scsih_cb_idx;
u8 ctl_cb_idx;
u8 base_cb_idx;
+ u8 port_enable_cb_idx;
u8 config_cb_idx;
u8 tm_tr_cb_idx;
u8 tm_tr_volume_cb_idx;
u8 tm_sas_control_cb_idx;
struct _internal_cmd base_cmds;
+ struct _internal_cmd port_enable_cmds;
struct _internal_cmd transport_cmds;
struct _internal_cmd scsih_cmds;
struct _internal_cmd tm_cmds;
u8 mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
u32 reply);
+u8 mpt2sas_port_enable_done(struct MPT2SAS_ADAPTER *ioc, u16 smid,
+ u8 msix_index, u32 reply);
void *mpt2sas_base_get_reply_virt_addr(struct MPT2SAS_ADAPTER *ioc, u32 phys_addr);
u32 mpt2sas_base_get_iocstate(struct MPT2SAS_ADAPTER *ioc, int cooked);
void mpt2sas_halt_firmware(struct MPT2SAS_ADAPTER *ioc);
+int mpt2sas_port_enable(struct MPT2SAS_ADAPTER *ioc);
+
/* scsih shared API */
u8 mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index,
u32 reply);
struct _sas_device *mpt2sas_scsih_sas_device_find_by_sas_address(
struct MPT2SAS_ADAPTER *ioc, u64 sas_address);
+void mpt2sas_port_enable_complete(struct MPT2SAS_ADAPTER *ioc);
+
void mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase);
/* config shared API */
Mpi2ConfigReply_t mpi_reply;
int r, i, config_page_sz;
u16 ioc_status;
+ int config_num;
+ u16 element_type;
+ u16 phys_disk_dev_handle;
*volume_handle = 0;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
if (r)
goto out;
- mpi_request.PageAddress =
- cpu_to_le32(MPI2_RAID_PGAD_FORM_ACTIVE_CONFIG);
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
config_page_sz = (le16_to_cpu(mpi_reply.ExtPageLength) * 4);
config_page = kmalloc(config_page_sz, GFP_KERNEL);
- if (!config_page)
- goto out;
- r = _config_request(ioc, &mpi_request, &mpi_reply,
- MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
- config_page_sz);
- if (r)
+ if (!config_page) {
+ r = -1;
goto out;
-
- r = -1;
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
- goto out;
- for (i = 0; i < config_page->NumElements; i++) {
- if ((le16_to_cpu(config_page->ConfigElement[i].ElementFlags) &
- MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE) !=
- MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT)
- continue;
- if (le16_to_cpu(config_page->ConfigElement[i].
- PhysDiskDevHandle) == pd_handle) {
- *volume_handle = le16_to_cpu(config_page->
- ConfigElement[i].VolDevHandle);
- r = 0;
+ }
+ config_num = 0xff;
+ while (1) {
+ mpi_request.PageAddress = cpu_to_le32(config_num +
+ MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM);
+ r = _config_request(ioc, &mpi_request, &mpi_reply,
+ MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+ config_page_sz);
+ if (r)
+ goto out;
+ r = -1;
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
goto out;
+ for (i = 0; i < config_page->NumElements; i++) {
+ element_type = le16_to_cpu(config_page->
+ ConfigElement[i].ElementFlags) &
+ MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE;
+ if (element_type ==
+ MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT ||
+ element_type ==
+ MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT) {
+ phys_disk_dev_handle =
+ le16_to_cpu(config_page->ConfigElement[i].
+ PhysDiskDevHandle);
+ if (phys_disk_dev_handle == pd_handle) {
+ *volume_handle =
+ le16_to_cpu(config_page->
+ ConfigElement[i].VolDevHandle);
+ r = 0;
+ goto out;
+ }
+ } else if (element_type ==
+ MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT) {
+ *volume_handle = 0;
+ r = 0;
+ goto out;
+ }
}
+ config_num = config_page->ConfigNum;
}
out:
kfree(config_page);
if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
return -ENODEV;
+ if (ioc->shost_recovery || ioc->pci_error_recovery ||
+ ioc->is_driver_loading)
+ return -EAGAIN;
dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
__func__));
!ioc)
return -ENODEV;
- if (ioc->shost_recovery || ioc->pci_error_recovery)
+ if (ioc->shost_recovery || ioc->pci_error_recovery ||
+ ioc->is_driver_loading)
return -EAGAIN;
if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_command)) {
if (_ctl_verify_adapter(karg32.hdr.ioc_number, &ioc) == -1 || !ioc)
return -ENODEV;
- if (ioc->shost_recovery || ioc->pci_error_recovery)
+ if (ioc->shost_recovery || ioc->pci_error_recovery ||
+ ioc->is_driver_loading)
return -EAGAIN;
memset(&karg, 0, sizeof(struct mpt2_ioctl_command));
static u8 _scsih_check_for_pending_tm(struct MPT2SAS_ADAPTER *ioc, u16 smid);
+static void _scsih_scan_start(struct Scsi_Host *shost);
+static int _scsih_scan_finished(struct Scsi_Host *shost, unsigned long time);
+
/* global parameters */
LIST_HEAD(mpt2sas_ioc_list);
static u8 tm_cb_idx = -1;
static u8 ctl_cb_idx = -1;
static u8 base_cb_idx = -1;
+static u8 port_enable_cb_idx = -1;
static u8 transport_cb_idx = -1;
static u8 scsih_cb_idx = -1;
static u8 config_cb_idx = -1;
module_param(max_lun, int, 0);
MODULE_PARM_DESC(max_lun, " max lun, default=16895 ");
+/* diag_buffer_enable is bitwise
+ * bit 0 set = TRACE
+ * bit 1 set = SNAPSHOT
+ * bit 2 set = EXTENDED
+ *
+ * Either bit can be set, or both
+ */
+static int diag_buffer_enable = -1;
+module_param(diag_buffer_enable, int, 0);
+MODULE_PARM_DESC(diag_buffer_enable, " post diag buffers "
+ "(TRACE=1/SNAPSHOT=2/EXTENDED=4/default=0)");
+
/**
* struct sense_info - common structure for obtaining sense keys
* @skey: sense key
#define MPT2SAS_TURN_ON_FAULT_LED (0xFFFC)
-#define MPT2SAS_RESCAN_AFTER_HOST_RESET (0xFFFF)
-
+#define MPT2SAS_PORT_ENABLE_COMPLETE (0xFFFD)
+#define MPT2SAS_REMOVE_UNRESPONDING_DEVICES (0xFFFF)
/**
* struct fw_event_work - firmware event struct
* @list: link list framework
Mpi2SasDevicePage0_t sas_device_pg0;
Mpi2ConfigReply_t mpi_reply;
u32 ioc_status;
+ *sas_address = 0;
if (handle <= ioc->sas_hba.num_phys) {
*sas_address = ioc->sas_hba.sas_address;
return 0;
- } else
- *sas_address = 0;
+ }
if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name,
+ __FILE__, __LINE__, __func__);
return -ENXIO;
}
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
- printk(MPT2SAS_ERR_FMT "handle(0x%04x), ioc_status(0x%04x)"
- "\nfailure at %s:%d/%s()!\n", ioc->name, handle, ioc_status,
- __FILE__, __LINE__, __func__);
- return -EIO;
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
+ if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
+ *sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
+ return 0;
}
- *sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
- return 0;
+ /* we hit this becuase the given parent handle doesn't exist */
+ if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+ return -ENXIO;
+ /* else error case */
+ printk(MPT2SAS_ERR_FMT "handle(0x%04x), ioc_status(0x%04x), "
+ "failure at %s:%d/%s()!\n", ioc->name, handle, ioc_status,
+ __FILE__, __LINE__, __func__);
+ return -EIO;
}
/**
u16 slot;
/* only process this function when driver loads */
- if (!ioc->wait_for_port_enable_to_complete)
+ if (!ioc->is_driver_loading)
+ return;
+
+ /* no Bios, return immediately */
+ if (!ioc->bios_pg3.BiosVersion)
return;
if (!is_raid) {
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
- sas_device->sas_address_parent))
+ sas_device->sas_address_parent)) {
_scsih_sas_device_remove(ioc, sas_device);
+ } else if (!sas_device->starget) {
+ if (!ioc->is_driver_loading)
+ mpt2sas_transport_port_remove(ioc,
+ sas_device->sas_address,
+ sas_device->sas_address_parent);
+ _scsih_sas_device_remove(ioc, sas_device);
+ }
}
/**
{
struct MPT2SAS_TARGET *sas_target_priv_data;
struct scsi_target *starget;
+ struct Scsi_Host *shost;
+ struct MPT2SAS_ADAPTER *ioc;
+ struct _sas_device *sas_device;
+ unsigned long flags;
if (!sdev->hostdata)
return;
starget = scsi_target(sdev);
sas_target_priv_data = starget->hostdata;
sas_target_priv_data->num_luns--;
+
+ shost = dev_to_shost(&starget->dev);
+ ioc = shost_priv(shost);
+
+ if (!(sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) {
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
+ sas_target_priv_data->sas_address);
+ if (sas_device)
+ sas_device->starget = NULL;
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ }
+
kfree(sdev->hostdata);
sdev->hostdata = NULL;
}
* _scsih_get_volume_capabilities - volume capabilities
* @ioc: per adapter object
* @sas_device: the raid_device object
+ *
+ * Returns 0 for success, else 1
*/
-static void
+static int
_scsih_get_volume_capabilities(struct MPT2SAS_ADAPTER *ioc,
struct _raid_device *raid_device)
{
if ((mpt2sas_config_get_number_pds(ioc, raid_device->handle,
&num_pds)) || !num_pds) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return;
+ dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
+ "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
+ __func__));
+ return 1;
}
raid_device->num_pds = num_pds;
sizeof(Mpi2RaidVol0PhysDisk_t));
vol_pg0 = kzalloc(sz, GFP_KERNEL);
if (!vol_pg0) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return;
+ dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
+ "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
+ __func__));
+ return 1;
}
if ((mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0,
MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
+ dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
+ "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
+ __func__));
kfree(vol_pg0);
- return;
+ return 1;
}
raid_device->volume_type = vol_pg0->VolumeType;
}
kfree(vol_pg0);
+ return 0;
}
/**
* _scsih_disable_ddio - Disable direct I/O for all the volumes
sas_target_priv_data->handle);
spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
if (!raid_device) {
- printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
- ioc->name, __FILE__, __LINE__, __func__);
- return 0;
+ dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
+ "failure at %s:%d/%s()!\n", ioc->name, __FILE__,
+ __LINE__, __func__));
+ return 1;
}
_scsih_get_volume_capabilities(ioc, raid_device);
+ if (_scsih_get_volume_capabilities(ioc, raid_device)) {
+ dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
+ "failure at %s:%d/%s()!\n", ioc->name, __FILE__,
+ __LINE__, __func__));
+ return 1;
+ }
/*
* WARPDRIVE: Initialize the required data for Direct IO
*/
if (sas_device) {
if (sas_target_priv_data->flags &
MPT_TARGET_FLAGS_RAID_COMPONENT) {
- mpt2sas_config_get_volume_handle(ioc,
- sas_device->handle, &sas_device->volume_handle);
- mpt2sas_config_get_volume_wwid(ioc,
+ if (mpt2sas_config_get_volume_handle(ioc,
+ sas_device->handle, &sas_device->volume_handle)) {
+ dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
+ "failure at %s:%d/%s()!\n", ioc->name,
+ __FILE__, __LINE__, __func__));
+ return 1;
+ }
+ if (sas_device->volume_handle &&
+ mpt2sas_config_get_volume_wwid(ioc,
sas_device->volume_handle,
- &sas_device->volume_wwid);
+ &sas_device->volume_wwid)) {
+ dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
+ "failure at %s:%d/%s()!\n", ioc->name,
+ __FILE__, __LINE__, __func__));
+ return 1;
+ }
}
if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) {
qdepth = MPT2SAS_SAS_QUEUE_DEPTH;
if (!ssp_target)
_scsih_display_sata_capabilities(ioc, sas_device, sdev);
+ } else {
+ dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
+ "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
+ __func__));
+ return 1;
}
_scsih_change_queue_depth(sdev, qdepth, SCSI_QDEPTH_DEFAULT);
/**
- * _scsih_queue_rescan - queue a topology rescan from user context
+ * _scsih_error_recovery_delete_devices - remove devices not responding
* @ioc: per adapter object
*
* Return nothing.
*/
static void
-_scsih_queue_rescan(struct MPT2SAS_ADAPTER *ioc)
+_scsih_error_recovery_delete_devices(struct MPT2SAS_ADAPTER *ioc)
{
struct fw_event_work *fw_event;
- if (ioc->wait_for_port_enable_to_complete)
+ if (ioc->is_driver_loading)
+ return;
+
+ fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC);
+ if (!fw_event)
return;
+
+ fw_event->event = MPT2SAS_REMOVE_UNRESPONDING_DEVICES;
+ fw_event->ioc = ioc;
+ _scsih_fw_event_add(ioc, fw_event);
+}
+
+/**
+ * mpt2sas_port_enable_complete - port enable completed (fake event)
+ * @ioc: per adapter object
+ *
+ * Return nothing.
+ */
+void
+mpt2sas_port_enable_complete(struct MPT2SAS_ADAPTER *ioc)
+{
+ struct fw_event_work *fw_event;
+
fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC);
if (!fw_event)
return;
- fw_event->event = MPT2SAS_RESCAN_AFTER_HOST_RESET;
+ fw_event->event = MPT2SAS_PORT_ENABLE_COMPLETE;
fw_event->ioc = ioc;
_scsih_fw_event_add(ioc, fw_event);
}
Mpi2SCSITaskManagementRequest_t *mpi_request;
u16 smid;
struct _sas_device *sas_device;
- struct MPT2SAS_TARGET *sas_target_priv_data;
+ struct MPT2SAS_TARGET *sas_target_priv_data = NULL;
+ u64 sas_address = 0;
unsigned long flags;
struct _tr_list *delayed_tr;
+ u32 ioc_state;
- if (ioc->shost_recovery || ioc->remove_host ||
- ioc->pci_error_recovery) {
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host reset in "
- "progress!\n", __func__, ioc->name));
+ if (ioc->remove_host) {
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host has been "
+ "removed: handle(0x%04x)\n", __func__, ioc->name, handle));
+ return;
+ } else if (ioc->pci_error_recovery) {
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host in pci "
+ "error recovery: handle(0x%04x)\n", __func__, ioc->name,
+ handle));
+ return;
+ }
+ ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
+ if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host is not "
+ "operational: handle(0x%04x)\n", __func__, ioc->name,
+ handle));
return;
}
sas_device->starget->hostdata) {
sas_target_priv_data = sas_device->starget->hostdata;
sas_target_priv_data->deleted = 1;
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
- "setting delete flag: handle(0x%04x), "
- "sas_addr(0x%016llx)\n", ioc->name, handle,
- (unsigned long long) sas_device->sas_address));
+ sas_address = sas_device->sas_address;
}
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ if (sas_target_priv_data) {
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "setting delete flag: "
+ "handle(0x%04x), sas_addr(0x%016llx)\n", ioc->name, handle,
+ (unsigned long long)sas_address));
+ _scsih_ublock_io_device(ioc, handle);
+ sas_target_priv_data->handle = MPT2SAS_INVALID_DEVICE_HANDLE;
+ }
+
smid = mpt2sas_base_get_smid_hpr(ioc, ioc->tm_tr_cb_idx);
if (!smid) {
delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC);
mpt2sas_base_get_reply_virt_addr(ioc, reply);
Mpi2SasIoUnitControlRequest_t *mpi_request;
u16 smid_sas_ctrl;
+ u32 ioc_state;
- if (ioc->shost_recovery || ioc->remove_host ||
- ioc->pci_error_recovery) {
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host reset in "
- "progress!\n", __func__, ioc->name));
+ if (ioc->remove_host) {
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host has been "
+ "removed\n", __func__, ioc->name));
+ return 1;
+ } else if (ioc->pci_error_recovery) {
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host in pci "
+ "error recovery\n", __func__, ioc->name));
+ return 1;
+ }
+ ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
+ if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host is not "
+ "operational\n", __func__, ioc->name));
return 1;
}
/* get device name */
sas_device->device_name = le64_to_cpu(sas_device_pg0.DeviceName);
- if (ioc->wait_for_port_enable_to_complete)
+ if (ioc->wait_for_discovery_to_complete)
_scsih_sas_device_init_add(ioc, sas_device);
else
_scsih_sas_device_add(ioc, sas_device);
if (sas_device_backup.starget && sas_device_backup.starget->hostdata) {
sas_target_priv_data = sas_device_backup.starget->hostdata;
sas_target_priv_data->deleted = 1;
+ _scsih_ublock_io_device(ioc, sas_device_backup.handle);
+ sas_target_priv_data->handle =
+ MPT2SAS_INVALID_DEVICE_HANDLE;
}
_scsih_ublock_io_device(ioc, sas_device_backup.handle);
_scsih_sas_topology_change_event_debug(ioc, event_data);
#endif
- if (ioc->shost_recovery || ioc->remove_host || ioc->pci_error_recovery)
+ if (ioc->remove_host || ioc->pci_error_recovery)
return;
if (!ioc->sas_hba.num_phys)
switch (reason_code) {
case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED:
+ if (ioc->shost_recovery)
+ break;
+
if (link_rate == prev_link_rate)
break;
break;
case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED:
+ if (ioc->shost_recovery)
+ break;
+
mpt2sas_transport_update_links(ioc, sas_address,
handle, phy_number, link_rate);
termination_count = 0;
query_count = 0;
for (smid = 1; smid <= ioc->scsiio_depth; smid++) {
- if (ioc->ioc_reset_in_progress_status)
+ if (ioc->shost_recovery)
goto out;
scmd = _scsih_scsi_lookup_get(ioc, smid);
if (!scmd)
lun = sas_device_priv_data->lun;
query_count++;
- if (ioc->ioc_reset_in_progress_status)
+ if (ioc->shost_recovery)
goto out;
spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
goto broadcast_aen_retry;
}
- if (ioc->ioc_reset_in_progress_status)
+ if (ioc->shost_recovery)
goto out_no_lock;
r = mpt2sas_scsih_issue_tm(ioc, handle, sdev->channel, sdev->id,
ioc->name, __func__, query_count, termination_count));
ioc->broadcast_aen_busy = 0;
- if (!ioc->ioc_reset_in_progress_status)
+ if (!ioc->shost_recovery)
_scsih_ublock_io_all_device(ioc);
mutex_unlock(&ioc->tm_cmds.mutex);
}
static void
_scsih_reprobe_target(struct scsi_target *starget, int no_uld_attach)
{
- struct MPT2SAS_TARGET *sas_target_priv_data = starget->hostdata;
+ struct MPT2SAS_TARGET *sas_target_priv_data;
+ if (starget == NULL)
+ return;
+ sas_target_priv_data = starget->hostdata;
if (no_uld_attach)
sas_target_priv_data->flags |= MPT_TARGET_FLAGS_RAID_COMPONENT;
else
raid_device->handle = handle;
raid_device->wwid = wwid;
_scsih_raid_device_add(ioc, raid_device);
- if (!ioc->wait_for_port_enable_to_complete) {
+ if (!ioc->wait_for_discovery_to_complete) {
rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
raid_device->id, 0);
if (rc)
_scsih_sas_ir_config_change_event_debug(ioc, event_data);
#endif
+
+ if (ioc->shost_recovery)
+ return;
+
foreign_config = (le32_to_cpu(event_data->Flags) &
MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? 1 : 0;
int rc;
Mpi2EventDataIrVolume_t *event_data = fw_event->event_data;
+ if (ioc->shost_recovery)
+ return;
+
if (event_data->ReasonCode != MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED)
return;
Mpi2EventDataIrPhysicalDisk_t *event_data = fw_event->event_data;
u64 sas_address;
+ if (ioc->shost_recovery)
+ return;
+
if (event_data->ReasonCode != MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED)
return;
u32 device_info;
u16 slot;
- printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, __func__);
+ printk(MPT2SAS_INFO_FMT "search for end-devices: start\n", ioc->name);
if (list_empty(&ioc->sas_device_list))
- return;
+ goto out;
handle = 0xFFFF;
while (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
_scsih_mark_responding_sas_device(ioc, sas_address, slot,
handle);
}
+out:
+ printk(MPT2SAS_INFO_FMT "search for end-devices: complete\n",
+ ioc->name);
}
/**
u16 handle;
u8 phys_disk_num;
- printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, __func__);
+ if (!ioc->ir_firmware)
+ return;
+
+ printk(MPT2SAS_INFO_FMT "search for raid volumes: start\n",
+ ioc->name);
if (list_empty(&ioc->raid_device_list))
- return;
+ goto out;
handle = 0xFFFF;
while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
set_bit(handle, ioc->pd_handles);
}
}
+out:
+ printk(MPT2SAS_INFO_FMT "search for responding raid volumes: "
+ "complete\n", ioc->name);
}
/**
u64 sas_address;
u16 handle;
- printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, __func__);
+ printk(MPT2SAS_INFO_FMT "search for expanders: start\n", ioc->name);
if (list_empty(&ioc->sas_expander_list))
- return;
+ goto out;
handle = 0xFFFF;
while (!(mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
_scsih_mark_responding_expander(ioc, sas_address, handle);
}
+ out:
+ printk(MPT2SAS_INFO_FMT "search for expanders: complete\n", ioc->name);
}
/**
struct _sas_node *sas_expander;
struct _raid_device *raid_device, *raid_device_next;
+ printk(MPT2SAS_INFO_FMT "removing unresponding devices: start\n",
+ ioc->name);
list_for_each_entry_safe(sas_device, sas_device_next,
&ioc->sas_device_list, list) {
_scsih_remove_device(ioc, sas_device);
}
+ if (!ioc->ir_firmware)
+ goto retry_expander_search;
+
list_for_each_entry_safe(raid_device, raid_device_next,
&ioc->raid_device_list, list) {
if (raid_device->responding) {
mpt2sas_expander_remove(ioc, sas_expander->sas_address);
goto retry_expander_search;
}
+ printk(MPT2SAS_INFO_FMT "removing unresponding devices: complete\n",
+ ioc->name);
+ /* unblock devices */
+ _scsih_ublock_io_all_device(ioc);
+}
+
+static void
+_scsih_refresh_expander_links(struct MPT2SAS_ADAPTER *ioc,
+ struct _sas_node *sas_expander, u16 handle)
+{
+ Mpi2ExpanderPage1_t expander_pg1;
+ Mpi2ConfigReply_t mpi_reply;
+ int i;
+
+ for (i = 0 ; i < sas_expander->num_phys ; i++) {
+ if ((mpt2sas_config_get_expander_pg1(ioc, &mpi_reply,
+ &expander_pg1, i, handle))) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return;
+ }
+
+ mpt2sas_transport_update_links(ioc, sas_expander->sas_address,
+ le16_to_cpu(expander_pg1.AttachedDevHandle), i,
+ expander_pg1.NegotiatedLinkRate >> 4);
+ }
}
/**
- * _scsih_hide_unhide_sas_devices - add/remove device to/from OS
+ * _scsih_scan_for_devices_after_reset - scan for devices after host reset
* @ioc: per adapter object
*
* Return nothing.
*/
static void
-_scsih_hide_unhide_sas_devices(struct MPT2SAS_ADAPTER *ioc)
+_scsih_scan_for_devices_after_reset(struct MPT2SAS_ADAPTER *ioc)
{
- struct _sas_device *sas_device, *sas_device_next;
+ Mpi2ExpanderPage0_t expander_pg0;
+ Mpi2SasDevicePage0_t sas_device_pg0;
+ Mpi2RaidVolPage1_t volume_pg1;
+ Mpi2RaidVolPage0_t volume_pg0;
+ Mpi2RaidPhysDiskPage0_t pd_pg0;
+ Mpi2EventIrConfigElement_t element;
+ Mpi2ConfigReply_t mpi_reply;
+ u8 phys_disk_num;
+ u16 ioc_status;
+ u16 handle, parent_handle;
+ u64 sas_address;
+ struct _sas_device *sas_device;
+ struct _sas_node *expander_device;
+ static struct _raid_device *raid_device;
- if (!ioc->is_warpdrive || ioc->mfg_pg10_hide_flag !=
- MFG_PAGE10_HIDE_IF_VOL_PRESENT)
- return;
+ printk(MPT2SAS_INFO_FMT "scan devices: start\n", ioc->name);
- if (ioc->hide_drives) {
- if (_scsih_get_num_volumes(ioc))
- return;
- ioc->hide_drives = 0;
- list_for_each_entry_safe(sas_device, sas_device_next,
- &ioc->sas_device_list, list) {
- if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
- sas_device->sas_address_parent)) {
- _scsih_sas_device_remove(ioc, sas_device);
- } else if (!sas_device->starget) {
- mpt2sas_transport_port_remove(ioc,
- sas_device->sas_address,
- sas_device->sas_address_parent);
- _scsih_sas_device_remove(ioc, sas_device);
- }
+ _scsih_sas_host_refresh(ioc);
+
+ /* expanders */
+ handle = 0xFFFF;
+ while (!(mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
+ MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) {
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+ break;
+ handle = le16_to_cpu(expander_pg0.DevHandle);
+ expander_device = mpt2sas_scsih_expander_find_by_sas_address(
+ ioc, le64_to_cpu(expander_pg0.SASAddress));
+ if (expander_device)
+ _scsih_refresh_expander_links(ioc, expander_device,
+ handle);
+ else
+ _scsih_expander_add(ioc, handle);
+ }
+
+ if (!ioc->ir_firmware)
+ goto skip_to_sas;
+
+ /* phys disk */
+ phys_disk_num = 0xFF;
+ while (!(mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
+ &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM,
+ phys_disk_num))) {
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+ break;
+ phys_disk_num = pd_pg0.PhysDiskNum;
+ handle = le16_to_cpu(pd_pg0.DevHandle);
+ sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+ if (sas_device)
+ continue;
+ if (mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
+ &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
+ handle) != 0)
+ continue;
+ parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
+ if (!_scsih_get_sas_address(ioc, parent_handle,
+ &sas_address)) {
+ mpt2sas_transport_update_links(ioc, sas_address,
+ handle, sas_device_pg0.PhyNum,
+ MPI2_SAS_NEG_LINK_RATE_1_5);
+ set_bit(handle, ioc->pd_handles);
+ _scsih_add_device(ioc, handle, 0, 1);
}
- } else {
- if (!_scsih_get_num_volumes(ioc))
- return;
- ioc->hide_drives = 1;
- list_for_each_entry_safe(sas_device, sas_device_next,
- &ioc->sas_device_list, list) {
- mpt2sas_transport_port_remove(ioc,
- sas_device->sas_address,
- sas_device->sas_address_parent);
+ }
+
+ /* volumes */
+ handle = 0xFFFF;
+ while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
+ &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+ break;
+ handle = le16_to_cpu(volume_pg1.DevHandle);
+ raid_device = _scsih_raid_device_find_by_wwid(ioc,
+ le64_to_cpu(volume_pg1.WWID));
+ if (raid_device)
+ continue;
+ if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply,
+ &volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
+ sizeof(Mpi2RaidVolPage0_t)))
+ continue;
+ if (volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL ||
+ volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_ONLINE ||
+ volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_DEGRADED) {
+ memset(&element, 0, sizeof(Mpi2EventIrConfigElement_t));
+ element.ReasonCode = MPI2_EVENT_IR_CHANGE_RC_ADDED;
+ element.VolDevHandle = volume_pg1.DevHandle;
+ _scsih_sas_volume_add(ioc, &element);
}
}
+
+ skip_to_sas:
+
+ /* sas devices */
+ handle = 0xFFFF;
+ while (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
+ &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE,
+ handle))) {
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+ break;
+ handle = le16_to_cpu(sas_device_pg0.DevHandle);
+ if (!(_scsih_is_end_device(
+ le32_to_cpu(sas_device_pg0.DeviceInfo))))
+ continue;
+ sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
+ le64_to_cpu(sas_device_pg0.SASAddress));
+ if (sas_device)
+ continue;
+ parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
+ if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address)) {
+ mpt2sas_transport_update_links(ioc, sas_address, handle,
+ sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
+ _scsih_add_device(ioc, handle, 0, 0);
+ }
+ }
+
+ printk(MPT2SAS_INFO_FMT "scan devices: complete\n", ioc->name);
}
+
/**
* mpt2sas_scsih_reset_handler - reset callback handler (for scsih)
* @ioc: per adapter object
}
_scsih_fw_event_cleanup_queue(ioc);
_scsih_flush_running_cmds(ioc);
- _scsih_queue_rescan(ioc);
break;
case MPT2_IOC_DONE_RESET:
dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
_scsih_search_responding_sas_devices(ioc);
_scsih_search_responding_raid_devices(ioc);
_scsih_search_responding_expanders(ioc);
+ if (!ioc->is_driver_loading) {
+ _scsih_prep_device_scan(ioc);
+ _scsih_search_responding_sas_devices(ioc);
+ _scsih_search_responding_raid_devices(ioc);
+ _scsih_search_responding_expanders(ioc);
+ _scsih_error_recovery_delete_devices(ioc);
+ }
break;
}
}
{
struct fw_event_work *fw_event = container_of(work,
struct fw_event_work, delayed_work.work);
- unsigned long flags;
struct MPT2SAS_ADAPTER *ioc = fw_event->ioc;
/* the queue is being flushed so ignore this event */
return;
}
- if (fw_event->event == MPT2SAS_RESCAN_AFTER_HOST_RESET) {
- _scsih_fw_event_free(ioc, fw_event);
- spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
- if (ioc->shost_recovery) {
- init_completion(&ioc->shost_recovery_done);
- spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock,
- flags);
- wait_for_completion(&ioc->shost_recovery_done);
- } else
- spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock,
- flags);
+ switch (fw_event->event) {
+ case MPT2SAS_REMOVE_UNRESPONDING_DEVICES:
+ while (scsi_host_in_recovery(ioc->shost))
+ ssleep(1);
_scsih_remove_unresponding_sas_devices(ioc);
- _scsih_hide_unhide_sas_devices(ioc);
- return;
- }
+ _scsih_scan_for_devices_after_reset(ioc);
+ break;
+ case MPT2SAS_PORT_ENABLE_COMPLETE:
+ ioc->start_scan = 0;
- switch (fw_event->event) {
+
+
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "port enable: complete "
+ "from worker thread\n", ioc->name));
+ break;
case MPT2SAS_TURN_ON_FAULT_LED:
_scsih_turn_on_fault_led(ioc, fw_event->device_handle);
break;
.slave_configure = _scsih_slave_configure,
.target_destroy = _scsih_target_destroy,
.slave_destroy = _scsih_slave_destroy,
+ .scan_finished = _scsih_scan_finished,
+ .scan_start = _scsih_scan_start,
.change_queue_depth = _scsih_change_queue_depth,
.change_queue_type = _scsih_change_queue_type,
.eh_abort_handler = _scsih_abort,
unsigned long flags;
int rc;
+ /* no Bios, return immediately */
+ if (!ioc->bios_pg3.BiosVersion)
+ return;
+
device = NULL;
+ is_raid = 0;
if (ioc->req_boot_device.device) {
device = ioc->req_boot_device.device;
is_raid = ioc->req_boot_device.is_raid;
sas_device->sas_address_parent)) {
_scsih_sas_device_remove(ioc, sas_device);
} else if (!sas_device->starget) {
- mpt2sas_transport_port_remove(ioc, sas_address,
- sas_address_parent);
+ if (!ioc->is_driver_loading)
+ mpt2sas_transport_port_remove(ioc, sas_address,
+ sas_address_parent);
_scsih_sas_device_remove(ioc, sas_device);
}
}
/* SAS Device List */
list_for_each_entry_safe(sas_device, next, &ioc->sas_device_init_list,
list) {
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- list_move_tail(&sas_device->list, &ioc->sas_device_list);
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
if (ioc->hide_drives)
continue;
if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
sas_device->sas_address_parent)) {
- _scsih_sas_device_remove(ioc, sas_device);
+ list_del(&sas_device->list);
+ kfree(sas_device);
+ continue;
} else if (!sas_device->starget) {
- mpt2sas_transport_port_remove(ioc,
- sas_device->sas_address,
- sas_device->sas_address_parent);
- _scsih_sas_device_remove(ioc, sas_device);
+ if (!ioc->is_driver_loading)
+ mpt2sas_transport_port_remove(ioc,
+ sas_device->sas_address,
+ sas_device->sas_address_parent);
+ list_del(&sas_device->list);
+ kfree(sas_device);
+ continue;
+
}
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ list_move_tail(&sas_device->list, &ioc->sas_device_list);
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
}
}
static void
_scsih_probe_devices(struct MPT2SAS_ADAPTER *ioc)
{
- u16 volume_mapping_flags =
- le16_to_cpu(ioc->ioc_pg8.IRVolumeMappingFlags) &
- MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;
+ u16 volume_mapping_flags;
if (!(ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR))
return; /* return when IOC doesn't support initiator mode */
_scsih_probe_boot_devices(ioc);
if (ioc->ir_firmware) {
- if ((volume_mapping_flags &
- MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING)) {
- _scsih_probe_sas(ioc);
+ volume_mapping_flags =
+ le16_to_cpu(ioc->ioc_pg8.IRVolumeMappingFlags) &
+ MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;
+ if (volume_mapping_flags ==
+ MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING) {
_scsih_probe_raid(ioc);
+ _scsih_probe_sas(ioc);
} else {
- _scsih_probe_raid(ioc);
_scsih_probe_sas(ioc);
+ _scsih_probe_raid(ioc);
}
} else
_scsih_probe_sas(ioc);
}
+
+/**
+ * _scsih_scan_start - scsi lld callback for .scan_start
+ * @shost: SCSI host pointer
+ *
+ * The shost has the ability to discover targets on its own instead
+ * of scanning the entire bus. In our implemention, we will kick off
+ * firmware discovery.
+ */
+static void
+_scsih_scan_start(struct Scsi_Host *shost)
+{
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+ int rc;
+
+ if (diag_buffer_enable != -1 && diag_buffer_enable != 0)
+ mpt2sas_enable_diag_buffer(ioc, diag_buffer_enable);
+
+ ioc->start_scan = 1;
+ rc = mpt2sas_port_enable(ioc);
+
+ if (rc != 0)
+ printk(MPT2SAS_INFO_FMT "port enable: FAILED\n", ioc->name);
+}
+
+/**
+ * _scsih_scan_finished - scsi lld callback for .scan_finished
+ * @shost: SCSI host pointer
+ * @time: elapsed time of the scan in jiffies
+ *
+ * This function will be called periodically until it returns 1 with the
+ * scsi_host and the elapsed time of the scan in jiffies. In our implemention,
+ * we wait for firmware discovery to complete, then return 1.
+ */
+static int
+_scsih_scan_finished(struct Scsi_Host *shost, unsigned long time)
+{
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+
+ if (time >= (300 * HZ)) {
+ ioc->base_cmds.status = MPT2_CMD_NOT_USED;
+ printk(MPT2SAS_INFO_FMT "port enable: FAILED with timeout "
+ "(timeout=300s)\n", ioc->name);
+ ioc->is_driver_loading = 0;
+ return 1;
+ }
+
+ if (ioc->start_scan)
+ return 0;
+
+ if (ioc->start_scan_failed) {
+ printk(MPT2SAS_INFO_FMT "port enable: FAILED with "
+ "(ioc_status=0x%08x)\n", ioc->name, ioc->start_scan_failed);
+ ioc->is_driver_loading = 0;
+ ioc->wait_for_discovery_to_complete = 0;
+ ioc->remove_host = 1;
+ return 1;
+ }
+
+ printk(MPT2SAS_INFO_FMT "port enable: SUCCESS\n", ioc->name);
+ ioc->base_cmds.status = MPT2_CMD_NOT_USED;
+
+ if (ioc->wait_for_discovery_to_complete) {
+ ioc->wait_for_discovery_to_complete = 0;
+ _scsih_probe_devices(ioc);
+ }
+ mpt2sas_base_start_watchdog(ioc);
+ ioc->is_driver_loading = 0;
+ return 1;
+}
+
+
/**
* _scsih_probe - attach and add scsi host
* @pdev: PCI device struct
ioc->tm_cb_idx = tm_cb_idx;
ioc->ctl_cb_idx = ctl_cb_idx;
ioc->base_cb_idx = base_cb_idx;
+ ioc->port_enable_cb_idx = port_enable_cb_idx;
ioc->transport_cb_idx = transport_cb_idx;
ioc->scsih_cb_idx = scsih_cb_idx;
ioc->config_cb_idx = config_cb_idx;
goto out_thread_fail;
}
- ioc->wait_for_port_enable_to_complete = 1;
+ ioc->is_driver_loading = 1;
if ((mpt2sas_base_attach(ioc))) {
printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
ioc->name, __FILE__, __LINE__, __func__);
goto out_attach_fail;
}
- ioc->wait_for_port_enable_to_complete = 0;
+ scsi_scan_host(shost);
if (ioc->is_warpdrive) {
if (ioc->mfg_pg10_hide_flag == MFG_PAGE10_EXPOSE_ALL_DISKS)
ioc->hide_drives = 0;
out_thread_fail:
list_del(&ioc->list);
scsi_remove_host(shost);
+ scsi_host_put(shost);
out_add_shost_fail:
return -ENODEV;
}
/* base internal commands callback handler */
base_cb_idx = mpt2sas_base_register_callback_handler(mpt2sas_base_done);
+ port_enable_cb_idx = mpt2sas_base_register_callback_handler(
+ mpt2sas_port_enable_done);
/* transport internal commands callback handler */
transport_cb_idx = mpt2sas_base_register_callback_handler(
mpt2sas_base_release_callback_handler(scsi_io_cb_idx);
mpt2sas_base_release_callback_handler(tm_cb_idx);
mpt2sas_base_release_callback_handler(base_cb_idx);
+ mpt2sas_base_release_callback_handler(port_enable_cb_idx);
mpt2sas_base_release_callback_handler(transport_cb_idx);
mpt2sas_base_release_callback_handler(scsih_cb_idx);
mpt2sas_base_release_callback_handler(config_cb_idx);
.class_mask = 0,
.driver_data = chip_9485,
},
+ { PCI_VDEVICE(OCZ, 0x1021), chip_9485}, /* OCZ RevoDrive3 */
+ { PCI_VDEVICE(OCZ, 0x1022), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
+ { PCI_VDEVICE(OCZ, 0x1040), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
+ { PCI_VDEVICE(OCZ, 0x1041), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
+ { PCI_VDEVICE(OCZ, 0x1042), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
+ { PCI_VDEVICE(OCZ, 0x1043), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
+ { PCI_VDEVICE(OCZ, 0x1044), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
+ { PCI_VDEVICE(OCZ, 0x1080), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
+ { PCI_VDEVICE(OCZ, 0x1083), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
+ { PCI_VDEVICE(OCZ, 0x1084), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
{ } /* terminate list */
};
*/
#include <linux/slab.h>
+#include <linux/module.h>
#include <scsi/osd_initiator.h>
#include <scsi/osd_sec.h>
struct pmcraid_ioctl_header *hdr = NULL;
int retval = -ENOTTY;
- hdr = kmalloc(GFP_KERNEL, sizeof(struct pmcraid_ioctl_header));
+ hdr = kmalloc(sizeof(struct pmcraid_ioctl_header), GFP_KERNEL);
if (!hdr) {
pmcraid_err("faile to allocate memory for ioctl header\n");
#include <linux/cdrom.h>
#include <linux/highmem.h>
+#include <linux/module.h>
#include <linux/slab.h>
#include <scsi/scsi.h>
ha = rsp->hw;
/* Clear the interrupt, if enabled, for this response queue */
- if (rsp->options & ~BIT_6) {
+ if (!ha->flags.disable_msix_handshake) {
reg = &ha->iobase->isp24;
spin_lock_irqsave(&ha->hardware_lock, flags);
WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT);
#include <linux/blkdev.h>
#include <linux/completion.h>
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/mempool.h>
#include <linux/slab.h>
#include <linux/init.h>
blk_start_request(req);
+ scmd_printk(KERN_INFO, cmd, "killing request\n");
+
sdev = cmd->device;
starget = scsi_target(sdev);
shost = sdev->host;
struct request *req;
if (!sdev) {
- printk("scsi: killing requests for dead queue\n");
while ((req = blk_peek_request(q)) != NULL)
scsi_kill_request(req, q);
return;
void scsi_free_queue(struct request_queue *q)
{
+ unsigned long flags;
+
+ WARN_ON(q->queuedata);
+
+ /* cause scsi_request_fn() to kill all non-finished requests */
+ spin_lock_irqsave(q->queue_lock, flags);
+ q->request_fn(q);
+ spin_unlock_irqrestore(q->queue_lock, flags);
+
blk_cleanup_queue(q);
}
#include <linux/blkdev.h>
#include <linux/device.h>
+#include <linux/export.h>
#include <linux/kernel.h>
#include <scsi/scsi.h>
#include <linux/security.h>
#include <linux/delay.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <net/sock.h>
#include <net/netlink.h>
*/
#include <linux/pm_runtime.h>
+#include <linux/export.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
return sdev;
out_device_destroy:
- scsi_device_set_state(sdev, SDEV_DEL);
- transport_destroy_device(&sdev->sdev_gendev);
- put_device(&sdev->sdev_dev);
- put_device(&sdev->sdev_gendev);
+ __scsi_remove_device(sdev);
out:
if (display_failure_msg)
printk(ALLOC_FAILURE_MSG, __func__);
#include <linux/miscdevice.h>
#include <linux/gfp.h>
#include <linux/file.h>
+#include <linux/export.h>
#include <net/tcp.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
/**
* iscsi_bsg_host_add - Create and add the bsg hooks to receive requests
* @shost: shost for iscsi_host
- * @cls_host: iscsi_cls_host adding the structures to
+ * @ihost: iscsi_cls_host adding the structures to
*/
static int
iscsi_bsg_host_add(struct Scsi_Host *shost, struct iscsi_cls_host *ihost)
spin_unlock(&sd_index_lock);
} while (error == -EAGAIN);
- if (error)
+ if (error) {
+ sdev_printk(KERN_WARNING, sdp, "sd_probe: memory exhausted.\n");
goto out_put;
-
- if (index >= SD_MAX_DISKS) {
- error = -ENODEV;
- sdev_printk(KERN_WARNING, sdp, "SCSI disk (sd) name space exhausted.\n");
- goto out_free_index;
}
error = sd_format_disk_name("sd", index, gd->disk_name, DISK_NAME_LEN);
- if (error)
+ if (error) {
+ sdev_printk(KERN_WARNING, sdp, "SCSI disk (sd) name length exceeded.\n");
goto out_free_index;
+ }
sdkp->device = sdp;
sdkp->driver = &sd_template;
*/
#define SD_MAJORS 16
-/*
- * This is limited by the naming scheme enforced in sd_probe,
- * add another character to it if you really need more disks.
- */
-#define SD_MAX_DISKS (((26 * 26) + 26 + 1) * 26)
-
/*
* Time out in seconds for disks and Magneto-opticals (which are slower).
*/
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/blkdev.h>
+#include <linux/module.h>
#include <linux/blkpg.h>
#include <linux/cdrom.h>
#include <linux/delay.h>
{
struct st_request *SRpnt = req->end_io_data;
struct scsi_tape *STp = SRpnt->stp;
+ struct bio *tmp;
STp->buffer->cmdstat.midlevel_result = SRpnt->result = req->errors;
STp->buffer->cmdstat.residual = req->resid_len;
+ tmp = SRpnt->bio;
if (SRpnt->waiting)
complete(SRpnt->waiting);
- blk_rq_unmap_user(SRpnt->bio);
+ blk_rq_unmap_user(tmp);
__blk_put_request(req->q, req);
}
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+
+#include <linux/sysfs.h>
+
struct sfi_table_key{
char *sig;
char *oem_id;
obj-$(CONFIG_MAPLE) += maple/
obj-$(CONFIG_SUPERHYWAY) += superhyway/
obj-$(CONFIG_GENERIC_GPIO) += pfc.o
+
+#
+# For the moment we only use this framework for ARM-based SH/R-Mobile
+# platforms and generic SH. SH-based SH-Mobile platforms are still using
+# an older framework that is pending up-porting, at which point this
+# special casing can go away.
+#
+obj-$(CONFIG_SUPERH)$(CONFIG_ARCH_SHMOBILE) += pm_runtime.o
#include <linux/seq_file.h>
#include <linux/err.h>
#include <linux/io.h>
-#include <linux/debugfs.h>
#include <linux/cpufreq.h>
#include <linux/clk.h>
#include <linux/sh_clk.h>
return clk_rate_round_helper(&div_range_round);
}
+static long clk_rate_mult_range_iter(unsigned int pos,
+ struct clk_rate_round_data *rounder)
+{
+ return clk_get_rate(rounder->arg) * pos;
+}
+
+long clk_rate_mult_range_round(struct clk *clk, unsigned int mult_min,
+ unsigned int mult_max, unsigned long rate)
+{
+ struct clk_rate_round_data mult_range_round = {
+ .min = mult_min,
+ .max = mult_max,
+ .func = clk_rate_mult_range_iter,
+ .arg = clk_get_parent(clk),
+ .rate = rate,
+ };
+
+ return clk_rate_round_helper(&mult_range_round);
+}
+
int clk_rate_table_find(struct clk *clk,
struct cpufreq_frequency_table *freq_table,
unsigned long rate)
list_add(&child->sibling, &parent->children);
child->parent = parent;
- /* now do the debugfs renaming to reattach the child
- to the proper parent */
-
return 0;
}
subsys_initcall(clk_syscore_init);
#endif
-/*
- * debugfs support to trace clock tree hierarchy and attributes
- */
-static struct dentry *clk_debugfs_root;
-
-static int clk_debugfs_register_one(struct clk *c)
-{
- int err;
- struct dentry *d;
- struct clk *pa = c->parent;
- char s[255];
- char *p = s;
-
- p += sprintf(p, "%p", c);
- d = debugfs_create_dir(s, pa ? pa->dentry : clk_debugfs_root);
- if (!d)
- return -ENOMEM;
- c->dentry = d;
-
- d = debugfs_create_u8("usecount", S_IRUGO, c->dentry, (u8 *)&c->usecount);
- if (!d) {
- err = -ENOMEM;
- goto err_out;
- }
- d = debugfs_create_u32("rate", S_IRUGO, c->dentry, (u32 *)&c->rate);
- if (!d) {
- err = -ENOMEM;
- goto err_out;
- }
- d = debugfs_create_x32("flags", S_IRUGO, c->dentry, (u32 *)&c->flags);
- if (!d) {
- err = -ENOMEM;
- goto err_out;
- }
- return 0;
-
-err_out:
- debugfs_remove_recursive(c->dentry);
- return err;
-}
-
-static int clk_debugfs_register(struct clk *c)
-{
- int err;
- struct clk *pa = c->parent;
-
- if (pa && !pa->dentry) {
- err = clk_debugfs_register(pa);
- if (err)
- return err;
- }
-
- if (!c->dentry) {
- err = clk_debugfs_register_one(c);
- if (err)
- return err;
- }
- return 0;
-}
-
-static int __init clk_debugfs_init(void)
-{
- struct clk *c;
- struct dentry *d;
- int err;
-
- d = debugfs_create_dir("clock", NULL);
- if (!d)
- return -ENOMEM;
- clk_debugfs_root = d;
-
- list_for_each_entry(c, &clock_list, node) {
- err = clk_debugfs_register(c);
- if (err)
- goto err_out;
- }
- return 0;
-err_out:
- debugfs_remove_recursive(clk_debugfs_root);
- return err;
-}
-late_initcall(clk_debugfs_init);
-
static int __init clk_late_init(void)
{
unsigned long flags;
!defined(CONFIG_CPU_SUBTYPE_SH7709)
[IRQ_TYPE_LEVEL_HIGH] = VALID(3),
#endif
-#if defined(CONFIG_ARCH_SH7372)
+#if defined(CONFIG_ARM) /* all recent SH-Mobile / R-Mobile ARM support this */
[IRQ_TYPE_EDGE_BOTH] = VALID(4),
#endif
};
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/slab.h>
+#include <linux/stat.h>
#include <linux/interrupt.h>
#include <linux/sh_intc.h>
#include <linux/sysdev.h>
#include <linux/list.h>
#include <linux/spinlock.h>
#include <linux/radix-tree.h>
+#include <linux/export.h>
#include "internals.h"
LIST_HEAD(intc_list);
#include <linux/irq.h>
#include <linux/bitmap.h>
#include <linux/spinlock.h>
+#include <linux/module.h>
#include "internals.h" /* only for activate_irq() damage.. */
/*
#include <linux/list.h>
#include <linux/radix-tree.h>
#include <linux/spinlock.h>
+#include <linux/export.h>
#include "internals.h"
static struct intc_map_entry intc_irq_xlate[NR_IRQS];
#include <linux/maple.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
+#include <linux/module.h>
#include <asm/cacheflush.h>
#include <asm/dma.h>
#include <asm/io.h>
--- /dev/null
+/*
+ * Runtime PM support code
+ *
+ * Copyright (C) 2009-2010 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_clock.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/sh_clk.h>
+#include <linux/bitmap.h>
+#include <linux/slab.h>
+
+#ifdef CONFIG_PM_RUNTIME
+
+static int default_platform_runtime_idle(struct device *dev)
+{
+ /* suspend synchronously to disable clocks immediately */
+ return pm_runtime_suspend(dev);
+}
+
+static struct dev_pm_domain default_pm_domain = {
+ .ops = {
+ .runtime_suspend = pm_clk_suspend,
+ .runtime_resume = pm_clk_resume,
+ .runtime_idle = default_platform_runtime_idle,
+ USE_PLATFORM_PM_SLEEP_OPS
+ },
+};
+
+#define DEFAULT_PM_DOMAIN_PTR (&default_pm_domain)
+
+#else
+
+#define DEFAULT_PM_DOMAIN_PTR NULL
+
+#endif /* CONFIG_PM_RUNTIME */
+
+static struct pm_clk_notifier_block platform_bus_notifier = {
+ .pm_domain = DEFAULT_PM_DOMAIN_PTR,
+ .con_ids = { NULL, },
+};
+
+static int __init sh_pm_runtime_init(void)
+{
+ pm_clk_add_notifier(&platform_bus_type, &platform_bus_notifier);
+ return 0;
+}
+core_initcall(sh_pm_runtime_init);
+
+static int __init sh_pm_runtime_late_init(void)
+{
+ pm_genpd_poweroff_unused();
+ return 0;
+}
+late_initcall(sh_pm_runtime_late_init);
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
/*-------------------------------------------------------------------------*/
-static int __init atmel_spi_probe(struct platform_device *pdev)
+static int __devinit atmel_spi_probe(struct platform_device *pdev)
{
struct resource *regs;
int irq;
return ret;
}
-static int __exit atmel_spi_remove(struct platform_device *pdev)
+static int __devexit atmel_spi_remove(struct platform_device *pdev)
{
struct spi_master *master = platform_get_drvdata(pdev);
struct atmel_spi *as = spi_master_get_devdata(master);
},
.suspend = atmel_spi_suspend,
.resume = atmel_spi_resume,
+ .probe = atmel_spi_probe,
.remove = __exit_p(atmel_spi_remove),
};
module_platform_driver(atmel_spi_driver);
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/errno.h>
+#include <linux/module.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/resource.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/platform_device.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/module.h>
#include <linux/device.h>
#include <linux/parport.h>
#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/scatterlist.h>
+#include <linux/module.h>
#include "spi-dw.h"
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/spi/spi.h>
+#include <linux/module.h>
#include "spi-dw.h"
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <linux/highmem.h>
#include <linux/delay.h>
#include <linux/slab.h>
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
+#include <linux/module.h>
#include <asm/system.h>
#include <asm/irq.h>
#include <linux/io.h>
#include <linux/spi/spi.h>
#include <linux/spi/orion_spi.h>
+#include <linux/module.h>
#include <asm/unaligned.h>
#define DRIVER_NAME "orion_spi"
goto err_clk_prep;
}
+ status = clk_enable(pl022->clk);
+ if (status) {
+ dev_err(&adev->dev, "could not enable SSP/SPI bus clock\n");
+ goto err_no_clk_en;
+ }
+
/* Disable SSP */
writew((readw(SSP_CR1(pl022->virtbase)) & (~SSP_CR1_MASK_SSE)),
SSP_CR1(pl022->virtbase));
free_irq(adev->irq[0], pl022);
err_no_irq:
+ clk_disable(pl022->clk);
+ err_no_clk_en:
clk_unprepare(pl022->clk);
err_clk_prep:
clk_put(pl022->clk);
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/of_device.h>
+#include <linux/module.h>
#include <linux/spi/pxa2xx_spi.h>
struct ce4100_info {
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
+#include <linux/module.h>
#include <plat/regs-spi.h>
#include <mach/spi.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
+#include <linux/module.h>
#include <asm/spi.h>
#include <asm/io.h>
#include <linux/err.h>
#include <linux/completion.h>
#include <linux/delay.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/mfd/ti_ssp.h>
#include <linux/device.h>
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/module.h>
#include <asm/gpio.h>
#include <linux/spi/spi.h>
#include <linux/of_spi.h>
#include <linux/pm_runtime.h>
+#include <linux/export.h>
static void spidev_release(struct device *dev)
{
*/
#include <linux/pci.h>
+#include <linux/module.h>
#include <linux/ssb/ssb.h>
#include "ssb_private.h"
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_regs.h>
+#include <linux/export.h>
#include <linux/pci.h>
#include "ssb_private.h"
#include <linux/ssb/ssb_regs.h>
#include <linux/ssb/ssb_driver_chipcommon.h>
#include <linux/delay.h>
+#include <linux/export.h>
#include "ssb_private.h"
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_driver_gige.h>
+#include <linux/export.h>
#include <linux/pci.h>
#include <linux/pci_regs.h>
#include <linux/slab.h>
#include <linux/ssb/ssb.h>
#include <linux/pci.h>
+#include <linux/export.h>
#include <linux/delay.h>
#include <linux/ssb/ssb_embedded.h>
* Licensed under the GNU/GPL. See COPYING for details.
*/
+#include <linux/export.h>
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_embedded.h>
#include <linux/ssb/ssb_driver_pci.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/module.h>
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_regs.h>
#include <linux/ssb/ssb_driver_gige.h>
*/
#include <linux/pci.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <linux/ssb/ssb.h>
#include <linux/types.h>
#include <linux/netdevice.h>
+#include <linux/module.h>
#include <linux/hdlc.h>
#include <linux/if_arp.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
+#include <linux/export.h>
#include "psb_drv.h"
#include "psb_intel_reg.h"
#include <asm/intel_scu_ipc.h>
#include "mdfld_dsi_pkg_sender.h"
#include <linux/pm_runtime.h>
+#include <linux/moduleparam.h>
#define MDFLD_DSI_BRIGHTNESS_MAX_LEVEL 100
*/
#include <linux/init.h>
+#include <linux/moduleparam.h>
#include "mdfld_dsi_dbi.h"
#include "mdfld_dsi_dpi.h"
#include "mdfld_dsi_output.h"
else
mdfld_dbi_dsr_init(dev);
}
-}
\ No newline at end of file
+}
* - Check ioremap failures
*/
+#include <linux/moduleparam.h>
#include <drm/drmP.h>
#include <drm/drm.h>
#include "psb_drm.h"
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
+#include <linux/export.h>
#include "psb_drv.h"
#define HDMI_READ(reg) readl(hdmi_dev->regs + (reg))
#include <linux/notifier.h>
#include <linux/spinlock.h>
#include <linux/pm_runtime.h>
+#include <linux/module.h>
#include <acpi/video.h>
static int drm_psb_trap_pagefaults;
+#include <linux/export.h>
#include <linux/interrupt.h>
#include <linux/mutex.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/spi/spi.h>
+#include <linux/export.h>
#include "../iio.h"
#include "../trigger.h"
+#include <linux/export.h>
#include <linux/interrupt.h>
#include <linux/mutex.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/spi/spi.h>
+#include <linux/export.h>
#include "../iio.h"
#include "../trigger.h"
+#include <linux/export.h>
#include <linux/interrupt.h>
#include <linux/mutex.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/spi/spi.h>
+#include <linux/export.h>
#include "../iio.h"
#include "../trigger.h"
+#include <linux/export.h>
#include <linux/interrupt.h>
#include <linux/mutex.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/spi/spi.h>
+#include <linux/export.h>
#include "../iio.h"
#include "../trigger.h"
+#include <linux/export.h>
#include <linux/interrupt.h>
#include <linux/mutex.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/spi/spi.h>
+#include <linux/export.h>
#include "../iio.h"
#include "../trigger.h"
#include <linux/kernel.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include "../iio.h"
#include "../ring_sw.h"
#include <linux/err.h>
#include <linux/sched.h>
#include <linux/delay.h>
+#include <linux/module.h>
#include "../iio.h"
#include "../sysfs.h"
#include <linux/slab.h>
#include <linux/sysfs.h>
#include <linux/regulator/consumer.h>
+#include <linux/module.h>
#include "../iio.h"
#include "../sysfs.h"
* Licensed under the GPL-2 or later.
*/
+#include <linux/module.h>
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/device.h>
+#include <linux/export.h>
#include <linux/interrupt.h>
#include <linux/mutex.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/spi/spi.h>
+#include <linux/export.h>
#include "../iio.h"
#include "../trigger.h"
*/
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
#include <linux/bitops.h>
+#include <linux/export.h>
#include "../iio.h"
#include "../ring_sw.h"
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/spi/spi.h>
+#include <linux/export.h>
#include "../iio.h"
#include "../trigger.h"
* - Alternative access techniques?
*/
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/device.h>
#include <linux/fs.h>
#include <linux/cdev.h>
*
* Licensed under the GPL-2.
*/
+#include <linux/export.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/spi/spi.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/spi/spi.h>
+#include <linux/export.h>
#include "../iio.h"
#include "../trigger.h"
#include <linux/firmware.h>
#include <linux/miscdevice.h>
#include <linux/pm_runtime.h>
+#include <linux/module.h>
#include <asm/mrst.h>
#include "intel_sst.h"
#include "intel_sst_ioctl.h"
#include <linux/fs.h>
#include <linux/firmware.h>
#include <linux/pm_runtime.h>
+#include <linux/export.h>
#include "intel_sst.h"
#include "intel_sst_ioctl.h"
#include "intel_sst_fw_ipc.h"
#include <sound/core.h>
#include <sound/initval.h>
+#include <linux/export.h>
#include "driver.h"
#include "audio.h"
#include "as102_fw.h"
#include "dvbdev.h"
-int debug;
-module_param_named(debug, debug, int, 0644);
+int as102_debug;
+module_param_named(debug, as102_debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off debugging (default: off)");
int dual_tuner;
#define DRIVER_FULL_NAME "Abilis Systems as10x usb driver"
#define DRIVER_NAME "as10x_usb"
-extern int debug;
+extern int as102_debug;
+#define debug as102_debug
#define dprintk(debug, args...) \
do { if (debug) { \
#include <linux/kthread.h>
#include <linux/slab.h>
#include <linux/freezer.h>
+#include <linux/export.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <sound/pcm.h>
CVM_OCT_SKB_CB(skb)[0] = hw_buffer.u64;
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
struct skb_frag_struct *fs = skb_shinfo(skb)->frags + i;
- hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)(page_address(fs->page) + fs->page_offset));
+ hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)(page_address(fs->page.p) + fs->page_offset));
hw_buffer.s.size = fs->size;
CVM_OCT_SKB_CB(skb)[i + 1] = hw_buffer.u64;
}
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
+#include <linux/export.h>
#include <scsi/scsi.h>
#include <scsi/scsi_eh.h>
struct mtd_oob_ops ops;
int ret;
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.datbuf = read_data;
ops.len = DeviceInfo.wPageDataSize;
ops.oobbuf = read_data + DeviceInfo.wPageDataSize + BTSIG_OFFSET;
struct mtd_oob_ops ops;
int ret;
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.datbuf = write_data;
ops.len = DeviceInfo.wPageDataSize;
ops.oobbuf = write_data + DeviceInfo.wPageDataSize + BTSIG_OFFSET;
struct mtd_oob_ops ops;
int ret;
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.datbuf = NULL;
ops.len = 0;
ops.oobbuf = read_data;
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <net/sock.h>
#include "usbip_common.h"
*/
#include <linux/kthread.h>
+#include <linux/export.h>
#include "usbip_common.h"
*/
#include <net/mac80211.h>
#include <linux/usb.h>
+#include <linux/module.h>
#include "core.h"
#include "mds_f.h"
#include <linux/skbuff.h>
#include <linux/if_arp.h>
#include <linux/ioport.h>
+#include <linux/module.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <linux/kthread.h>
#include <linux/crypto.h>
#include <linux/completion.h>
+#include <linux/module.h>
#include <asm/unaligned.h>
#include <scsi/scsi_device.h>
#include <scsi/iscsi_proto.h>
*/
if (!cmd->immediate_data) {
cmdsn_ret = iscsit_sequence_cmd(conn, cmd, hdr->cmdsn);
- if (cmdsn_ret == CMDSN_ERROR_CANNOT_RECOVER)
+ if (cmdsn_ret == CMDSN_LOWER_THAN_EXP)
+ return 0;
+ else if (cmdsn_ret == CMDSN_ERROR_CANNOT_RECOVER)
return iscsit_add_reject_from_cmd(
ISCSI_REASON_PROTOCOL_ERROR,
1, 0, buf, cmd);
int cmdsn_ret = iscsit_sequence_cmd(conn, cmd, hdr->cmdsn);
if (cmdsn_ret == CMDSN_HIGHER_THAN_EXP)
out_of_order_cmdsn = 1;
- else if (cmdsn_ret == CMDSN_LOWER_THAN_EXP) {
+ else if (cmdsn_ret == CMDSN_LOWER_THAN_EXP)
return 0;
- } else { /* (cmdsn_ret == CMDSN_ERROR_CANNOT_RECOVER) */
+ else if (cmdsn_ret == CMDSN_ERROR_CANNOT_RECOVER)
return iscsit_add_reject_from_cmd(
ISCSI_REASON_PROTOCOL_ERROR,
1, 0, buf, cmd);
- }
}
iscsit_ack_from_expstatsn(conn, hdr->exp_statsn);
- if (out_of_order_cmdsn)
+ if (out_of_order_cmdsn || !(hdr->opcode & ISCSI_OP_IMMEDIATE))
return 0;
/*
* Found the referenced task, send to transport for processing.
****************************************************************************/
#include <linux/configfs.h>
+#include <linux/export.h>
#include <target/target_core_base.h>
#include <target/target_core_transport.h>
#include <target/target_core_fabric_ops.h>
******************************************************************************/
#include <linux/configfs.h>
+#include <linux/export.h>
#include <scsi/iscsi_proto.h>
#include <target/target_core_base.h>
#include <target/target_core_transport.h>
sgl_bidi = sdb->table.sgl;
sgl_bidi_count = sdb->table.nents;
}
+ /*
+ * Because some userspace code via scsi-generic do not memset their
+ * associated read buffers, go ahead and do that here for type
+ * SCF_SCSI_CONTROL_SG_IO_CDB. Also note that this is currently
+ * guaranteed to be a single SGL for SCF_SCSI_CONTROL_SG_IO_CDB
+ * by target core in transport_generic_allocate_tasks() ->
+ * transport_generic_cmd_sequencer().
+ */
+ if (se_cmd->se_cmd_flags & SCF_SCSI_CONTROL_SG_IO_CDB &&
+ se_cmd->data_direction == DMA_FROM_DEVICE) {
+ struct scatterlist *sg = scsi_sglist(sc);
+ unsigned char *buf = kmap(sg_page(sg)) + sg->offset;
+
+ if (buf != NULL) {
+ memset(buf, 0, sg->length);
+ kunmap(sg_page(sg));
+ }
+ }
/* Tell the core about our preallocated memory */
ret = transport_generic_map_mem_to_cmd(se_cmd, scsi_sglist(sc),
/*
* Called from struct target_core_fabric_ops->check_stop_free()
*/
-static void tcm_loop_check_stop_free(struct se_cmd *se_cmd)
+static int tcm_loop_check_stop_free(struct se_cmd *se_cmd)
{
/*
* Do not release struct se_cmd's containing a valid TMR
* with transport_generic_free_cmd().
*/
if (se_cmd->se_tmr_req)
- return;
+ return 0;
/*
* Release the struct se_cmd, which will make a callback to release
* struct tcm_loop_cmd * in tcm_loop_deallocate_core_cmd()
*/
transport_generic_free_cmd(se_cmd, 0);
+ return 1;
}
static void tcm_loop_release_cmd(struct se_cmd *se_cmd)
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/configfs.h>
+#include <linux/export.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
*
* See spc4r17 section 6.27
*/
-int core_emulate_report_target_port_groups(struct se_cmd *cmd)
+int target_emulate_report_target_port_groups(struct se_task *task)
{
+ struct se_cmd *cmd = task->task_se_cmd;
struct se_subsystem_dev *su_dev = cmd->se_dev->se_sub_dev;
struct se_port *port;
struct t10_alua_tg_pt_gp *tg_pt_gp;
transport_kunmap_first_data_page(cmd);
+ task->task_scsi_status = GOOD;
+ transport_complete_task(task, 1);
return 0;
}
*
* See spc4r17 section 6.35
*/
-int core_emulate_set_target_port_groups(struct se_cmd *cmd)
+int target_emulate_set_target_port_groups(struct se_task *task)
{
+ struct se_cmd *cmd = task->task_se_cmd;
struct se_device *dev = cmd->se_dev;
struct se_subsystem_dev *su_dev = dev->se_sub_dev;
struct se_port *port, *l_port = cmd->se_lun->lun_sep;
out:
transport_kunmap_first_data_page(cmd);
-
+ task->task_scsi_status = GOOD;
+ transport_complete_task(task, 1);
return 0;
}
extern struct kmem_cache *t10_alua_tg_pt_gp_cache;
extern struct kmem_cache *t10_alua_tg_pt_gp_mem_cache;
-extern int core_emulate_report_target_port_groups(struct se_cmd *);
-extern int core_emulate_set_target_port_groups(struct se_cmd *);
+extern int target_emulate_report_target_port_groups(struct se_task *);
+extern int target_emulate_set_target_port_groups(struct se_task *);
extern int core_alua_check_nonop_delay(struct se_cmd *);
extern int core_alua_do_port_transition(struct t10_alua_tg_pt_gp *,
struct se_device *, struct se_port *,
#include <target/target_core_transport.h>
#include <target/target_core_fabric_ops.h>
#include "target_core_ua.h"
+#include "target_core_cdb.h"
static void
target_fill_alua_data(struct se_port *port, unsigned char *buf)
return 0;
}
-static int
-target_emulate_inquiry(struct se_cmd *cmd)
+int target_emulate_inquiry(struct se_task *task)
{
+ struct se_cmd *cmd = task->task_se_cmd;
struct se_device *dev = cmd->se_dev;
unsigned char *buf;
unsigned char *cdb = cmd->t_task_cdb;
int p, ret;
- if (!(cdb[1] & 0x1))
- return target_emulate_inquiry_std(cmd);
+ if (!(cdb[1] & 0x1)) {
+ ret = target_emulate_inquiry_std(cmd);
+ goto out;
+ }
/*
* Make sure we at least have 4 bytes of INQUIRY response
buf[0] = dev->transport->get_device_type(dev);
- for (p = 0; p < ARRAY_SIZE(evpd_handlers); ++p)
+ for (p = 0; p < ARRAY_SIZE(evpd_handlers); ++p) {
if (cdb[2] == evpd_handlers[p].page) {
buf[1] = cdb[2];
ret = evpd_handlers[p].emulate(cmd, buf);
- transport_kunmap_first_data_page(cmd);
- return ret;
+ goto out_unmap;
}
+ }
- transport_kunmap_first_data_page(cmd);
pr_err("Unknown VPD Code: 0x%02x\n", cdb[2]);
- return -EINVAL;
+ ret = -EINVAL;
+
+out_unmap:
+ transport_kunmap_first_data_page(cmd);
+out:
+ if (!ret) {
+ task->task_scsi_status = GOOD;
+ transport_complete_task(task, 1);
+ }
+ return ret;
}
-static int
-target_emulate_readcapacity(struct se_cmd *cmd)
+int target_emulate_readcapacity(struct se_task *task)
{
+ struct se_cmd *cmd = task->task_se_cmd;
struct se_device *dev = cmd->se_dev;
unsigned char *buf;
unsigned long long blocks_long = dev->transport->get_blocks(dev);
transport_kunmap_first_data_page(cmd);
+ task->task_scsi_status = GOOD;
+ transport_complete_task(task, 1);
return 0;
}
-static int
-target_emulate_readcapacity_16(struct se_cmd *cmd)
+int target_emulate_readcapacity_16(struct se_task *task)
{
+ struct se_cmd *cmd = task->task_se_cmd;
struct se_device *dev = cmd->se_dev;
unsigned char *buf;
unsigned long long blocks = dev->transport->get_blocks(dev);
transport_kunmap_first_data_page(cmd);
+ task->task_scsi_status = GOOD;
+ transport_complete_task(task, 1);
return 0;
}
}
}
-static int
-target_emulate_modesense(struct se_cmd *cmd, int ten)
+int target_emulate_modesense(struct se_task *task)
{
+ struct se_cmd *cmd = task->task_se_cmd;
struct se_device *dev = cmd->se_dev;
char *cdb = cmd->t_task_cdb;
unsigned char *rbuf;
int type = dev->transport->get_device_type(dev);
- int offset = (ten) ? 8 : 4;
+ int ten = (cmd->t_task_cdb[0] == MODE_SENSE_10);
+ int offset = ten ? 8 : 4;
int length = 0;
unsigned char buf[SE_MODE_PAGE_BUF];
memcpy(rbuf, buf, offset);
transport_kunmap_first_data_page(cmd);
+ task->task_scsi_status = GOOD;
+ transport_complete_task(task, 1);
return 0;
}
-static int
-target_emulate_request_sense(struct se_cmd *cmd)
+int target_emulate_request_sense(struct se_task *task)
{
+ struct se_cmd *cmd = task->task_se_cmd;
unsigned char *cdb = cmd->t_task_cdb;
unsigned char *buf;
u8 ua_asc = 0, ua_ascq = 0;
end:
transport_kunmap_first_data_page(cmd);
-
+ task->task_scsi_status = GOOD;
+ transport_complete_task(task, 1);
return 0;
}
* Used for TCM/IBLOCK and TCM/FILEIO for block/blk-lib.c level discard support.
* Note this is not used for TCM/pSCSI passthrough
*/
-static int
-target_emulate_unmap(struct se_task *task)
+int target_emulate_unmap(struct se_task *task)
{
struct se_cmd *cmd = task->task_se_cmd;
struct se_device *dev = cmd->se_dev;
int ret = 0, offset;
unsigned short dl, bd_dl;
+ if (!dev->transport->do_discard) {
+ pr_err("UNMAP emulation not supported for: %s\n",
+ dev->transport->name);
+ return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
+ }
+
/* First UNMAP block descriptor starts at 8 byte offset */
offset = 8;
size -= 8;
err:
transport_kunmap_first_data_page(cmd);
-
+ if (!ret) {
+ task->task_scsi_status = GOOD;
+ transport_complete_task(task, 1);
+ }
return ret;
}
* Used for TCM/IBLOCK and TCM/FILEIO for block/blk-lib.c level discard support.
* Note this is not used for TCM/pSCSI passthrough
*/
-static int
-target_emulate_write_same(struct se_task *task, u32 num_blocks)
+int target_emulate_write_same(struct se_task *task)
{
struct se_cmd *cmd = task->task_se_cmd;
struct se_device *dev = cmd->se_dev;
sector_t range;
sector_t lba = cmd->t_task_lba;
+ u32 num_blocks;
int ret;
+
+ if (!dev->transport->do_discard) {
+ pr_err("WRITE_SAME emulation not supported"
+ " for: %s\n", dev->transport->name);
+ return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
+ }
+
+ if (cmd->t_task_cdb[0] == WRITE_SAME)
+ num_blocks = get_unaligned_be16(&cmd->t_task_cdb[7]);
+ else if (cmd->t_task_cdb[0] == WRITE_SAME_16)
+ num_blocks = get_unaligned_be32(&cmd->t_task_cdb[10]);
+ else /* WRITE_SAME_32 via VARIABLE_LENGTH_CMD */
+ num_blocks = get_unaligned_be32(&cmd->t_task_cdb[28]);
+
/*
* Use the explicit range when non zero is supplied, otherwise calculate
* the remaining range based on ->get_blocks() - starting LBA.
return ret;
}
+ task->task_scsi_status = GOOD;
+ transport_complete_task(task, 1);
return 0;
}
-int
-transport_emulate_control_cdb(struct se_task *task)
+int target_emulate_synchronize_cache(struct se_task *task)
{
- struct se_cmd *cmd = task->task_se_cmd;
- struct se_device *dev = cmd->se_dev;
- unsigned short service_action;
- int ret = 0;
+ struct se_device *dev = task->task_se_cmd->se_dev;
- switch (cmd->t_task_cdb[0]) {
- case INQUIRY:
- ret = target_emulate_inquiry(cmd);
- break;
- case READ_CAPACITY:
- ret = target_emulate_readcapacity(cmd);
- break;
- case MODE_SENSE:
- ret = target_emulate_modesense(cmd, 0);
- break;
- case MODE_SENSE_10:
- ret = target_emulate_modesense(cmd, 1);
- break;
- case SERVICE_ACTION_IN:
- switch (cmd->t_task_cdb[1] & 0x1f) {
- case SAI_READ_CAPACITY_16:
- ret = target_emulate_readcapacity_16(cmd);
- break;
- default:
- pr_err("Unsupported SA: 0x%02x\n",
- cmd->t_task_cdb[1] & 0x1f);
- return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
- }
- break;
- case REQUEST_SENSE:
- ret = target_emulate_request_sense(cmd);
- break;
- case UNMAP:
- if (!dev->transport->do_discard) {
- pr_err("UNMAP emulation not supported for: %s\n",
- dev->transport->name);
- return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
- }
- ret = target_emulate_unmap(task);
- break;
- case WRITE_SAME:
- if (!dev->transport->do_discard) {
- pr_err("WRITE_SAME emulation not supported"
- " for: %s\n", dev->transport->name);
- return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
- }
- ret = target_emulate_write_same(task,
- get_unaligned_be16(&cmd->t_task_cdb[7]));
- break;
- case WRITE_SAME_16:
- if (!dev->transport->do_discard) {
- pr_err("WRITE_SAME_16 emulation not supported"
- " for: %s\n", dev->transport->name);
- return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
- }
- ret = target_emulate_write_same(task,
- get_unaligned_be32(&cmd->t_task_cdb[10]));
- break;
- case VARIABLE_LENGTH_CMD:
- service_action =
- get_unaligned_be16(&cmd->t_task_cdb[8]);
- switch (service_action) {
- case WRITE_SAME_32:
- if (!dev->transport->do_discard) {
- pr_err("WRITE_SAME_32 SA emulation not"
- " supported for: %s\n",
- dev->transport->name);
- return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
- }
- ret = target_emulate_write_same(task,
- get_unaligned_be32(&cmd->t_task_cdb[28]));
- break;
- default:
- pr_err("Unsupported VARIABLE_LENGTH_CMD SA:"
- " 0x%02x\n", service_action);
- break;
- }
- break;
- case SYNCHRONIZE_CACHE:
- case 0x91: /* SYNCHRONIZE_CACHE_16: */
- if (!dev->transport->do_sync_cache) {
- pr_err("SYNCHRONIZE_CACHE emulation not supported"
- " for: %s\n", dev->transport->name);
- return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
- }
- dev->transport->do_sync_cache(task);
- break;
- case ALLOW_MEDIUM_REMOVAL:
- case ERASE:
- case REZERO_UNIT:
- case SEEK_10:
- case SPACE:
- case START_STOP:
- case TEST_UNIT_READY:
- case VERIFY:
- case WRITE_FILEMARKS:
- break;
- default:
- pr_err("Unsupported SCSI Opcode: 0x%02x for %s\n",
- cmd->t_task_cdb[0], dev->transport->name);
+ if (!dev->transport->do_sync_cache) {
+ pr_err("SYNCHRONIZE_CACHE emulation not supported"
+ " for: %s\n", dev->transport->name);
return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
}
- if (ret < 0)
- return ret;
- /*
- * Handle the successful completion here unless a caller
- * has explictly requested an asychronous completion.
- */
- if (!(cmd->se_cmd_flags & SCF_EMULATE_CDB_ASYNC)) {
- task->task_scsi_status = GOOD;
- transport_complete_task(task, 1);
- }
+ dev->transport->do_sync_cache(task);
+ return 0;
+}
- return PYX_TRANSPORT_SENT_TO_TRANSPORT;
+int target_emulate_noop(struct se_task *task)
+{
+ task->task_scsi_status = GOOD;
+ transport_complete_task(task, 1);
+ return 0;
}
/*
--- /dev/null
+#ifndef TARGET_CORE_CDB_H
+#define TARGET_CORE_CDB_H
+
+int target_emulate_inquiry(struct se_task *task);
+int target_emulate_readcapacity(struct se_task *task);
+int target_emulate_readcapacity_16(struct se_task *task);
+int target_emulate_modesense(struct se_task *task);
+int target_emulate_request_sense(struct se_task *task);
+int target_emulate_unmap(struct se_task *task);
+int target_emulate_write_same(struct se_task *task);
+int target_emulate_synchronize_cache(struct se_task *task);
+int target_emulate_noop(struct se_task *task);
+
+#endif /* TARGET_CORE_CDB_H */
#include <linux/spinlock.h>
#include <linux/kthread.h>
#include <linux/in.h>
+#include <linux/export.h>
#include <net/sock.h>
#include <net/tcp.h>
#include <scsi/scsi.h>
lun->lun_se_dev = NULL;
}
-int transport_core_report_lun_response(struct se_cmd *se_cmd)
+int target_report_luns(struct se_task *se_task)
{
+ struct se_cmd *se_cmd = se_task->task_se_cmd;
struct se_dev_entry *deve;
struct se_lun *se_lun;
struct se_session *se_sess = se_cmd->se_sess;
- struct se_task *se_task;
unsigned char *buf;
u32 cdb_offset = 0, lun_count = 0, offset = 8, i;
- list_for_each_entry(se_task, &se_cmd->t_task_list, t_list)
- break;
-
- if (!se_task) {
- pr_err("Unable to locate struct se_task for struct se_cmd\n");
- return PYX_TRANSPORT_LU_COMM_FAILURE;
- }
-
buf = transport_kmap_first_data_page(se_cmd);
/*
buf[2] = ((lun_count >> 8) & 0xff);
buf[3] = (lun_count & 0xff);
+ se_task->task_scsi_status = GOOD;
+ transport_complete_task(se_task, 1);
return PYX_TRANSPORT_SENT_TO_TRANSPORT;
}
#include <linux/string.h>
#include <linux/ctype.h>
#include <linux/spinlock.h>
+#include <linux/export.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <linux/blkdev.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
+#include <linux/module.h>
#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/in.h>
+#include <linux/module.h>
#include <net/sock.h>
#include <net/tcp.h>
#include <linux/bio.h>
#include <linux/genhd.h>
#include <linux/file.h>
+#include <linux/module.h>
#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
return ret;
}
-static int core_scsi2_reservation_release(struct se_cmd *cmd)
-{
- struct se_device *dev = cmd->se_dev;
- struct se_session *sess = cmd->se_sess;
- struct se_portal_group *tpg = sess->se_tpg;
-
- if (!sess || !tpg)
- return 0;
-
- spin_lock(&dev->dev_reservation_lock);
- if (!dev->dev_reserved_node_acl || !sess) {
- spin_unlock(&dev->dev_reservation_lock);
- return 0;
- }
-
- if (dev->dev_reserved_node_acl != sess->se_node_acl) {
- spin_unlock(&dev->dev_reservation_lock);
- return 0;
- }
- dev->dev_reserved_node_acl = NULL;
- dev->dev_flags &= ~DF_SPC2_RESERVATIONS;
- if (dev->dev_flags & DF_SPC2_RESERVATIONS_WITH_ISID) {
- dev->dev_res_bin_isid = 0;
- dev->dev_flags &= ~DF_SPC2_RESERVATIONS_WITH_ISID;
- }
- pr_debug("SCSI-2 Released reservation for %s LUN: %u ->"
- " MAPPED LUN: %u for %s\n", tpg->se_tpg_tfo->get_fabric_name(),
- cmd->se_lun->unpacked_lun, cmd->se_deve->mapped_lun,
- sess->se_node_acl->initiatorname);
- spin_unlock(&dev->dev_reservation_lock);
-
- return 0;
-}
-
-static int core_scsi2_reservation_reserve(struct se_cmd *cmd)
-{
- struct se_device *dev = cmd->se_dev;
- struct se_session *sess = cmd->se_sess;
- struct se_portal_group *tpg = sess->se_tpg;
-
- if ((cmd->t_task_cdb[1] & 0x01) &&
- (cmd->t_task_cdb[1] & 0x02)) {
- pr_err("LongIO and Obselete Bits set, returning"
- " ILLEGAL_REQUEST\n");
- return PYX_TRANSPORT_ILLEGAL_REQUEST;
- }
- /*
- * This is currently the case for target_core_mod passthrough struct se_cmd
- * ops
- */
- if (!sess || !tpg)
- return 0;
-
- spin_lock(&dev->dev_reservation_lock);
- if (dev->dev_reserved_node_acl &&
- (dev->dev_reserved_node_acl != sess->se_node_acl)) {
- pr_err("SCSI-2 RESERVATION CONFLIFT for %s fabric\n",
- tpg->se_tpg_tfo->get_fabric_name());
- pr_err("Original reserver LUN: %u %s\n",
- cmd->se_lun->unpacked_lun,
- dev->dev_reserved_node_acl->initiatorname);
- pr_err("Current attempt - LUN: %u -> MAPPED LUN: %u"
- " from %s \n", cmd->se_lun->unpacked_lun,
- cmd->se_deve->mapped_lun,
- sess->se_node_acl->initiatorname);
- spin_unlock(&dev->dev_reservation_lock);
- return PYX_TRANSPORT_RESERVATION_CONFLICT;
- }
-
- dev->dev_reserved_node_acl = sess->se_node_acl;
- dev->dev_flags |= DF_SPC2_RESERVATIONS;
- if (sess->sess_bin_isid != 0) {
- dev->dev_res_bin_isid = sess->sess_bin_isid;
- dev->dev_flags |= DF_SPC2_RESERVATIONS_WITH_ISID;
- }
- pr_debug("SCSI-2 Reserved %s LUN: %u -> MAPPED LUN: %u"
- " for %s\n", tpg->se_tpg_tfo->get_fabric_name(),
- cmd->se_lun->unpacked_lun, cmd->se_deve->mapped_lun,
- sess->se_node_acl->initiatorname);
- spin_unlock(&dev->dev_reservation_lock);
-
- return 0;
-}
-
static struct t10_pr_registration *core_scsi3_locate_pr_reg(struct se_device *,
struct se_node_acl *, struct se_session *);
static void core_scsi3_put_pr_reg(struct t10_pr_registration *);
-/*
- * Setup in target_core_transport.c:transport_generic_cmd_sequencer()
- * and called via struct se_cmd->transport_emulate_cdb() in TCM processing
- * thread context.
- */
-int core_scsi2_emulate_crh(struct se_cmd *cmd)
+static int target_check_scsi2_reservation_conflict(struct se_cmd *cmd, int *ret)
{
struct se_session *se_sess = cmd->se_sess;
struct se_subsystem_dev *su_dev = cmd->se_dev->se_sub_dev;
struct t10_pr_registration *pr_reg;
struct t10_reservation *pr_tmpl = &su_dev->t10_pr;
- unsigned char *cdb = &cmd->t_task_cdb[0];
int crh = (su_dev->t10_pr.res_type == SPC3_PERSISTENT_RESERVATIONS);
int conflict = 0;
- if (!se_sess)
- return 0;
-
if (!crh)
- goto after_crh;
+ return false;
pr_reg = core_scsi3_locate_pr_reg(cmd->se_dev, se_sess->se_node_acl,
se_sess);
*/
if (pr_reg->pr_res_holder) {
core_scsi3_put_pr_reg(pr_reg);
- return 0;
+ *ret = 0;
+ return false;
}
if ((pr_reg->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_REGONLY) ||
(pr_reg->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_REGONLY) ||
(pr_reg->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_ALLREG) ||
(pr_reg->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_ALLREG)) {
core_scsi3_put_pr_reg(pr_reg);
- return 0;
+ *ret = 0;
+ return true;
}
core_scsi3_put_pr_reg(pr_reg);
conflict = 1;
pr_err("Received legacy SPC-2 RESERVE/RELEASE"
" while active SPC-3 registrations exist,"
" returning RESERVATION_CONFLICT\n");
- return PYX_TRANSPORT_RESERVATION_CONFLICT;
+ *ret = PYX_TRANSPORT_RESERVATION_CONFLICT;
+ return true;
}
-after_crh:
- if ((cdb[0] == RESERVE) || (cdb[0] == RESERVE_10))
- return core_scsi2_reservation_reserve(cmd);
- else if ((cdb[0] == RELEASE) || (cdb[0] == RELEASE_10))
- return core_scsi2_reservation_release(cmd);
- else
- return PYX_TRANSPORT_INVALID_CDB_FIELD;
+ return false;
+}
+
+int target_scsi2_reservation_release(struct se_task *task)
+{
+ struct se_cmd *cmd = task->task_se_cmd;
+ struct se_device *dev = cmd->se_dev;
+ struct se_session *sess = cmd->se_sess;
+ struct se_portal_group *tpg = sess->se_tpg;
+ int ret = 0;
+
+ if (!sess || !tpg)
+ goto out;
+ if (target_check_scsi2_reservation_conflict(cmd, &ret))
+ goto out;
+
+ ret = 0;
+ spin_lock(&dev->dev_reservation_lock);
+ if (!dev->dev_reserved_node_acl || !sess)
+ goto out_unlock;
+
+ if (dev->dev_reserved_node_acl != sess->se_node_acl)
+ goto out_unlock;
+
+ dev->dev_reserved_node_acl = NULL;
+ dev->dev_flags &= ~DF_SPC2_RESERVATIONS;
+ if (dev->dev_flags & DF_SPC2_RESERVATIONS_WITH_ISID) {
+ dev->dev_res_bin_isid = 0;
+ dev->dev_flags &= ~DF_SPC2_RESERVATIONS_WITH_ISID;
+ }
+ pr_debug("SCSI-2 Released reservation for %s LUN: %u ->"
+ " MAPPED LUN: %u for %s\n", tpg->se_tpg_tfo->get_fabric_name(),
+ cmd->se_lun->unpacked_lun, cmd->se_deve->mapped_lun,
+ sess->se_node_acl->initiatorname);
+
+out_unlock:
+ spin_unlock(&dev->dev_reservation_lock);
+out:
+ if (!ret) {
+ task->task_scsi_status = GOOD;
+ transport_complete_task(task, 1);
+ }
+ return ret;
+}
+
+int target_scsi2_reservation_reserve(struct se_task *task)
+{
+ struct se_cmd *cmd = task->task_se_cmd;
+ struct se_device *dev = cmd->se_dev;
+ struct se_session *sess = cmd->se_sess;
+ struct se_portal_group *tpg = sess->se_tpg;
+ int ret = 0;
+
+ if ((cmd->t_task_cdb[1] & 0x01) &&
+ (cmd->t_task_cdb[1] & 0x02)) {
+ pr_err("LongIO and Obselete Bits set, returning"
+ " ILLEGAL_REQUEST\n");
+ ret = PYX_TRANSPORT_ILLEGAL_REQUEST;
+ goto out;
+ }
+ /*
+ * This is currently the case for target_core_mod passthrough struct se_cmd
+ * ops
+ */
+ if (!sess || !tpg)
+ goto out;
+ if (target_check_scsi2_reservation_conflict(cmd, &ret))
+ goto out;
+
+ ret = 0;
+ spin_lock(&dev->dev_reservation_lock);
+ if (dev->dev_reserved_node_acl &&
+ (dev->dev_reserved_node_acl != sess->se_node_acl)) {
+ pr_err("SCSI-2 RESERVATION CONFLIFT for %s fabric\n",
+ tpg->se_tpg_tfo->get_fabric_name());
+ pr_err("Original reserver LUN: %u %s\n",
+ cmd->se_lun->unpacked_lun,
+ dev->dev_reserved_node_acl->initiatorname);
+ pr_err("Current attempt - LUN: %u -> MAPPED LUN: %u"
+ " from %s \n", cmd->se_lun->unpacked_lun,
+ cmd->se_deve->mapped_lun,
+ sess->se_node_acl->initiatorname);
+ ret = PYX_TRANSPORT_RESERVATION_CONFLICT;
+ goto out_unlock;
+ }
+
+ dev->dev_reserved_node_acl = sess->se_node_acl;
+ dev->dev_flags |= DF_SPC2_RESERVATIONS;
+ if (sess->sess_bin_isid != 0) {
+ dev->dev_res_bin_isid = sess->sess_bin_isid;
+ dev->dev_flags |= DF_SPC2_RESERVATIONS_WITH_ISID;
+ }
+ pr_debug("SCSI-2 Reserved %s LUN: %u -> MAPPED LUN: %u"
+ " for %s\n", tpg->se_tpg_tfo->get_fabric_name(),
+ cmd->se_lun->unpacked_lun, cmd->se_deve->mapped_lun,
+ sess->se_node_acl->initiatorname);
+
+out_unlock:
+ spin_unlock(&dev->dev_reservation_lock);
+out:
+ if (!ret) {
+ task->task_scsi_status = GOOD;
+ transport_complete_task(task, 1);
+ }
+ return ret;
}
+
/*
* Begin SPC-3/SPC-4 Persistent Reservations emulation support
*
break;
case RELEASE:
case RELEASE_10:
- /* Handled by CRH=1 in core_scsi2_emulate_crh() */
+ /* Handled by CRH=1 in target_scsi2_reservation_release() */
ret = 0;
break;
case RESERVE:
case RESERVE_10:
- /* Handled by CRH=1 in core_scsi2_emulate_crh() */
+ /* Handled by CRH=1 in target_scsi2_reservation_reserve() */
ret = 0;
break;
case TEST_UNIT_READY:
/*
* See spc4r17 section 6.14 Table 170
*/
-static int core_scsi3_emulate_pr_out(struct se_cmd *cmd, unsigned char *cdb)
+int target_scsi3_emulate_pr_out(struct se_task *task)
{
+ struct se_cmd *cmd = task->task_se_cmd;
+ unsigned char *cdb = &cmd->t_task_cdb[0];
unsigned char *buf;
u64 res_key, sa_res_key;
int sa, scope, type, aptpl;
int spec_i_pt = 0, all_tg_pt = 0, unreg = 0;
+ int ret;
+
+ /*
+ * Following spc2r20 5.5.1 Reservations overview:
+ *
+ * If a logical unit has been reserved by any RESERVE command and is
+ * still reserved by any initiator, all PERSISTENT RESERVE IN and all
+ * PERSISTENT RESERVE OUT commands shall conflict regardless of
+ * initiator or service action and shall terminate with a RESERVATION
+ * CONFLICT status.
+ */
+ if (cmd->se_dev->dev_flags & DF_SPC2_RESERVATIONS) {
+ pr_err("Received PERSISTENT_RESERVE CDB while legacy"
+ " SPC-2 reservation is held, returning"
+ " RESERVATION_CONFLICT\n");
+ ret = PYX_TRANSPORT_RESERVATION_CONFLICT;
+ goto out;
+ }
+
/*
* FIXME: A NULL struct se_session pointer means an this is not coming from
* a $FABRIC_MOD's nexus, but from internal passthrough ops.
if (cmd->data_length < 24) {
pr_warn("SPC-PR: Received PR OUT parameter list"
" length too small: %u\n", cmd->data_length);
- return PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+ ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+ goto out;
}
/*
* From the PERSISTENT_RESERVE_OUT command descriptor block (CDB)
/*
* SPEC_I_PT=1 is only valid for Service action: REGISTER
*/
- if (spec_i_pt && ((cdb[1] & 0x1f) != PRO_REGISTER))
- return PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+ if (spec_i_pt && ((cdb[1] & 0x1f) != PRO_REGISTER)) {
+ ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+ goto out;
+ }
+
/*
* From spc4r17 section 6.14:
*
(cmd->data_length != 24)) {
pr_warn("SPC-PR: Received PR OUT illegal parameter"
" list length: %u\n", cmd->data_length);
- return PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+ ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+ goto out;
}
/*
* (core_scsi3_emulate_pro_* function parameters
*/
switch (sa) {
case PRO_REGISTER:
- return core_scsi3_emulate_pro_register(cmd,
+ ret = core_scsi3_emulate_pro_register(cmd,
res_key, sa_res_key, aptpl, all_tg_pt, spec_i_pt, 0);
+ break;
case PRO_RESERVE:
- return core_scsi3_emulate_pro_reserve(cmd,
- type, scope, res_key);
+ ret = core_scsi3_emulate_pro_reserve(cmd, type, scope, res_key);
+ break;
case PRO_RELEASE:
- return core_scsi3_emulate_pro_release(cmd,
- type, scope, res_key);
+ ret = core_scsi3_emulate_pro_release(cmd, type, scope, res_key);
+ break;
case PRO_CLEAR:
- return core_scsi3_emulate_pro_clear(cmd, res_key);
+ ret = core_scsi3_emulate_pro_clear(cmd, res_key);
+ break;
case PRO_PREEMPT:
- return core_scsi3_emulate_pro_preempt(cmd, type, scope,
+ ret = core_scsi3_emulate_pro_preempt(cmd, type, scope,
res_key, sa_res_key, 0);
+ break;
case PRO_PREEMPT_AND_ABORT:
- return core_scsi3_emulate_pro_preempt(cmd, type, scope,
+ ret = core_scsi3_emulate_pro_preempt(cmd, type, scope,
res_key, sa_res_key, 1);
+ break;
case PRO_REGISTER_AND_IGNORE_EXISTING_KEY:
- return core_scsi3_emulate_pro_register(cmd,
+ ret = core_scsi3_emulate_pro_register(cmd,
0, sa_res_key, aptpl, all_tg_pt, spec_i_pt, 1);
+ break;
case PRO_REGISTER_AND_MOVE:
- return core_scsi3_emulate_pro_register_and_move(cmd, res_key,
+ ret = core_scsi3_emulate_pro_register_and_move(cmd, res_key,
sa_res_key, aptpl, unreg);
+ break;
default:
pr_err("Unknown PERSISTENT_RESERVE_OUT service"
" action: 0x%02x\n", cdb[1] & 0x1f);
- return PYX_TRANSPORT_INVALID_CDB_FIELD;
+ ret = PYX_TRANSPORT_INVALID_CDB_FIELD;
+ break;
}
- return PYX_TRANSPORT_INVALID_CDB_FIELD;
+out:
+ if (!ret) {
+ task->task_scsi_status = GOOD;
+ transport_complete_task(task, 1);
+ }
+ return ret;
}
/*
return 0;
}
-static int core_scsi3_emulate_pr_in(struct se_cmd *cmd, unsigned char *cdb)
+int target_scsi3_emulate_pr_in(struct se_task *task)
{
- switch (cdb[1] & 0x1f) {
- case PRI_READ_KEYS:
- return core_scsi3_pri_read_keys(cmd);
- case PRI_READ_RESERVATION:
- return core_scsi3_pri_read_reservation(cmd);
- case PRI_REPORT_CAPABILITIES:
- return core_scsi3_pri_report_capabilities(cmd);
- case PRI_READ_FULL_STATUS:
- return core_scsi3_pri_read_full_status(cmd);
- default:
- pr_err("Unknown PERSISTENT_RESERVE_IN service"
- " action: 0x%02x\n", cdb[1] & 0x1f);
- return PYX_TRANSPORT_INVALID_CDB_FIELD;
- }
-
-}
+ struct se_cmd *cmd = task->task_se_cmd;
+ int ret;
-int core_scsi3_emulate_pr(struct se_cmd *cmd)
-{
- unsigned char *cdb = &cmd->t_task_cdb[0];
- struct se_device *dev = cmd->se_dev;
/*
* Following spc2r20 5.5.1 Reservations overview:
*
* initiator or service action and shall terminate with a RESERVATION
* CONFLICT status.
*/
- if (dev->dev_flags & DF_SPC2_RESERVATIONS) {
+ if (cmd->se_dev->dev_flags & DF_SPC2_RESERVATIONS) {
pr_err("Received PERSISTENT_RESERVE CDB while legacy"
" SPC-2 reservation is held, returning"
" RESERVATION_CONFLICT\n");
return PYX_TRANSPORT_RESERVATION_CONFLICT;
}
- return (cdb[0] == PERSISTENT_RESERVE_OUT) ?
- core_scsi3_emulate_pr_out(cmd, cdb) :
- core_scsi3_emulate_pr_in(cmd, cdb);
+ switch (cmd->t_task_cdb[1] & 0x1f) {
+ case PRI_READ_KEYS:
+ ret = core_scsi3_pri_read_keys(cmd);
+ break;
+ case PRI_READ_RESERVATION:
+ ret = core_scsi3_pri_read_reservation(cmd);
+ break;
+ case PRI_REPORT_CAPABILITIES:
+ ret = core_scsi3_pri_report_capabilities(cmd);
+ break;
+ case PRI_READ_FULL_STATUS:
+ ret = core_scsi3_pri_read_full_status(cmd);
+ break;
+ default:
+ pr_err("Unknown PERSISTENT_RESERVE_IN service"
+ " action: 0x%02x\n", cmd->t_task_cdb[1] & 0x1f);
+ ret = PYX_TRANSPORT_INVALID_CDB_FIELD;
+ break;
+ }
+
+ if (!ret) {
+ task->task_scsi_status = GOOD;
+ transport_complete_task(task, 1);
+ }
+ return ret;
}
static int core_pt_reservation_check(struct se_cmd *cmd, u32 *pr_res_type)
extern int core_pr_dump_initiator_port(struct t10_pr_registration *,
char *, u32);
-extern int core_scsi2_emulate_crh(struct se_cmd *);
+extern int target_scsi2_reservation_release(struct se_task *task);
+extern int target_scsi2_reservation_reserve(struct se_task *task);
extern int core_scsi3_alloc_aptpl_registration(
struct t10_reservation *, u64,
unsigned char *, unsigned char *, u32,
extern unsigned char *core_scsi3_pr_dump_type(int);
extern int core_scsi3_check_cdb_abort_and_preempt(struct list_head *,
struct se_cmd *);
-extern int core_scsi3_emulate_pr(struct se_cmd *);
+
+extern int target_scsi3_emulate_pr_in(struct se_task *task);
+extern int target_scsi3_emulate_pr_out(struct se_task *task);
extern int core_setup_reservations(struct se_device *, int);
#endif /* TARGET_CORE_PR_H */
#include <linux/genhd.h>
#include <linux/cdrom.h>
#include <linux/file.h>
+#include <linux/module.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_cmnd.h>
req = blk_make_request(pdv->pdv_sd->request_queue, hbio,
GFP_KERNEL);
- if (!req) {
+ if (IS_ERR(req)) {
pr_err("pSCSI: blk_make_request() failed\n");
goto fail;
}
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/list.h>
+#include <linux/export.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
/*
* Allow the received TMR to return with FUNCTION_COMPLETE.
*/
- if (tmr && (tmr_p == tmr))
+ if (tmr_p == tmr)
continue;
cmd = tmr_p->task_cmd;
}
spin_unlock(&cmd->t_state_lock);
- list_move_tail(&tmr->tmr_list, &drain_tmr_list);
+ list_move_tail(&tmr_p->tmr_list, &drain_tmr_list);
}
spin_unlock_irqrestore(&dev->se_tmr_lock, flags);
- while (!list_empty(&drain_tmr_list)) {
- tmr = list_entry(drain_tmr_list.next, struct se_tmr_req, tmr_list);
- list_del(&tmr->tmr_list);
+ list_for_each_entry_safe(tmr_p, tmr_pp, &drain_tmr_list, tmr_list) {
+ list_del_init(&tmr_p->tmr_list);
cmd = tmr_p->task_cmd;
pr_debug("LUN_RESET: %s releasing TMR %p Function: 0x%02x,"
" Response: 0x%02x, t_state: %d\n",
- (preempt_and_abort_list) ? "Preempt" : "", tmr,
- tmr->function, tmr->response, cmd->t_state);
+ (preempt_and_abort_list) ? "Preempt" : "", tmr_p,
+ tmr_p->function, tmr_p->response, cmd->t_state);
transport_cmd_finish_abort(cmd, 1);
}
*/
if (prout_cmd == cmd)
continue;
- /*
- * Skip direct processing of TRANSPORT_FREE_CMD_INTR for
- * HW target mode fabrics.
- */
- spin_lock(&cmd->t_state_lock);
- if (cmd->t_state == TRANSPORT_FREE_CMD_INTR) {
- spin_unlock(&cmd->t_state_lock);
- continue;
- }
- spin_unlock(&cmd->t_state_lock);
atomic_set(&cmd->t_transport_queue_active, 0);
atomic_dec(&qobj->queue_cnt);
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/in.h>
+#include <linux/export.h>
#include <net/sock.h>
#include <net/tcp.h>
#include <scsi/scsi.h>
#include <linux/kthread.h>
#include <linux/in.h>
#include <linux/cdrom.h>
+#include <linux/module.h>
#include <asm/unaligned.h>
#include <net/sock.h>
#include <net/tcp.h>
#include <target/target_core_configfs.h>
#include "target_core_alua.h"
+#include "target_core_cdb.h"
#include "target_core_hba.h"
#include "target_core_pr.h"
#include "target_core_ua.h"
}
INIT_LIST_HEAD(&se_sess->sess_list);
INIT_LIST_HEAD(&se_sess->sess_acl_list);
+ INIT_LIST_HEAD(&se_sess->sess_cmd_list);
+ INIT_LIST_HEAD(&se_sess->sess_wait_list);
+ spin_lock_init(&se_sess->sess_cmd_lock);
return se_sess;
}
* Some fabric modules like tcm_loop can release
* their internally allocated I/O reference now and
* struct se_cmd now.
+ *
+ * Fabric modules are expected to return '1' here if the
+ * se_cmd being passed is released at this point,
+ * or zero if not being released.
*/
if (cmd->se_tfo->check_stop_free != NULL) {
spin_unlock_irqrestore(
&cmd->t_state_lock, flags);
- cmd->se_tfo->check_stop_free(cmd);
- return 1;
+ return cmd->se_tfo->check_stop_free(cmd);
}
}
spin_unlock_irqrestore(&cmd->t_state_lock, flags);
complete(&task->task_stop_comp);
return;
}
+
+ if (!success)
+ cmd->t_tasks_failed = 1;
+
/*
* Decrement the outstanding t_task_cdbs_left count. The last
* struct se_task from struct se_cmd will complete itself into the
return;
}
- if (!success || cmd->t_tasks_failed) {
+ if (cmd->t_tasks_failed) {
if (!task->task_error_status) {
task->task_error_status =
PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
}
/*
- * Handle QUEUE_FULL / -EAGAIN status
+ * Handle QUEUE_FULL / -EAGAIN and -ENOMEM status
*/
static void target_qf_do_work(struct work_struct *work)
INIT_LIST_HEAD(&cmd->se_ordered_node);
INIT_LIST_HEAD(&cmd->se_qf_node);
INIT_LIST_HEAD(&cmd->se_queue_node);
-
+ INIT_LIST_HEAD(&cmd->se_cmd_list);
INIT_LIST_HEAD(&cmd->t_task_list);
init_completion(&cmd->transport_lun_fe_stop_comp);
init_completion(&cmd->transport_lun_stop_comp);
init_completion(&cmd->t_transport_stop_comp);
+ init_completion(&cmd->cmd_wait_comp);
spin_lock_init(&cmd->t_state_lock);
atomic_set(&cmd->transport_dev_active, 1);
* and call transport_generic_request_failure() if necessary..
*/
ret = transport_generic_new_cmd(cmd);
- if (ret == -EAGAIN)
- return 0;
- else if (ret < 0) {
+ if (ret < 0) {
cmd->transport_error_status = ret;
transport_generic_request_failure(cmd, 0,
(cmd->data_direction != DMA_TO_DEVICE));
}
EXPORT_SYMBOL(transport_generic_handle_tmr);
-void transport_generic_free_cmd_intr(
- struct se_cmd *cmd)
-{
- transport_add_cmd_to_queue(cmd, TRANSPORT_FREE_CMD_INTR, false);
-}
-EXPORT_SYMBOL(transport_generic_free_cmd_intr);
-
/*
* If the task is active, request it to be stopped and sleep until it
* has completed.
ASCQ_2CH_PREVIOUS_RESERVATION_CONFLICT_STATUS);
ret = cmd->se_tfo->queue_status(cmd);
- if (ret == -EAGAIN)
+ if (ret == -EAGAIN || ret == -ENOMEM)
goto queue_full;
goto check_stop;
case PYX_TRANSPORT_USE_SENSE_REASON:
else {
ret = transport_send_check_condition_and_sense(cmd,
cmd->scsi_sense_reason, 0);
- if (ret == -EAGAIN)
+ if (ret == -EAGAIN || ret == -ENOMEM)
goto queue_full;
}
atomic_set(&cmd->t_transport_sent, 1);
spin_unlock_irqrestore(&cmd->t_state_lock, flags);
- /*
- * The struct se_cmd->transport_emulate_cdb() function pointer is used
- * to grab REPORT_LUNS and other CDBs we want to handle before they hit the
- * struct se_subsystem_api->do_task() caller below.
- */
- if (cmd->transport_emulate_cdb) {
- error = cmd->transport_emulate_cdb(cmd);
- if (error != 0) {
- cmd->transport_error_status = error;
- spin_lock_irqsave(&cmd->t_state_lock, flags);
- task->task_flags &= ~TF_ACTIVE;
- spin_unlock_irqrestore(&cmd->t_state_lock, flags);
- atomic_set(&cmd->t_transport_sent, 0);
- transport_stop_tasks_for_cmd(cmd);
- atomic_inc(&dev->depth_left);
- transport_generic_request_failure(cmd, 0, 1);
- goto check_depth;
- }
- /*
- * Handle the successful completion for transport_emulate_cdb()
- * for synchronous operation, following SCF_EMULATE_CDB_ASYNC
- * Otherwise the caller is expected to complete the task with
- * proper status.
- */
- if (!(cmd->se_cmd_flags & SCF_EMULATE_CDB_ASYNC)) {
- cmd->scsi_status = SAM_STAT_GOOD;
- task->task_scsi_status = GOOD;
- transport_complete_task(task, 1);
- }
- } else {
- /*
- * Currently for all virtual TCM plugins including IBLOCK, FILEIO and
- * RAMDISK we use the internal transport_emulate_control_cdb() logic
- * with struct se_subsystem_api callers for the primary SPC-3 TYPE_DISK
- * LUN emulation code.
- *
- * For TCM/pSCSI and all other SCF_SCSI_DATA_SG_IO_CDB I/O tasks we
- * call ->do_task() directly and let the underlying TCM subsystem plugin
- * code handle the CDB emulation.
- */
- if ((dev->transport->transport_type != TRANSPORT_PLUGIN_PHBA_PDEV) &&
- (!(task->task_se_cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB)))
- error = transport_emulate_control_cdb(task);
- else
- error = dev->transport->do_task(task);
- if (error != 0) {
- cmd->transport_error_status = error;
- spin_lock_irqsave(&cmd->t_state_lock, flags);
- task->task_flags &= ~TF_ACTIVE;
- spin_unlock_irqrestore(&cmd->t_state_lock, flags);
- atomic_set(&cmd->t_transport_sent, 0);
- transport_stop_tasks_for_cmd(cmd);
- atomic_inc(&dev->depth_left);
- transport_generic_request_failure(cmd, 0, 1);
- }
+ if (cmd->execute_task)
+ error = cmd->execute_task(task);
+ else
+ error = dev->transport->do_task(task);
+ if (error != 0) {
+ cmd->transport_error_status = error;
+ spin_lock_irqsave(&cmd->t_state_lock, flags);
+ task->task_flags &= ~TF_ACTIVE;
+ spin_unlock_irqrestore(&cmd->t_state_lock, flags);
+ atomic_set(&cmd->t_transport_sent, 0);
+ transport_stop_tasks_for_cmd(cmd);
+ atomic_inc(&dev->depth_left);
+ transport_generic_request_failure(cmd, 0, 1);
}
goto check_depth;
*/
}
+ /*
+ * If we operate in passthrough mode we skip most CDB emulation and
+ * instead hand the commands down to the physical SCSI device.
+ */
+ passthrough =
+ (dev->transport->transport_type == TRANSPORT_PLUGIN_PHBA_PDEV);
+
switch (cdb[0]) {
case READ_6:
sectors = transport_get_sectors_6(cdb, cmd, §or_ret);
cmd->t_task_lba = transport_lba_32(cdb);
cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB;
- if (dev->transport->transport_type ==
- TRANSPORT_PLUGIN_PHBA_PDEV)
+ /*
+ * Do now allow BIDI commands for passthrough mode.
+ */
+ if (passthrough)
goto out_unsupported_cdb;
+
/*
* Setup BIDI XOR callback to be run after I/O completion.
*/
break;
case VARIABLE_LENGTH_CMD:
service_action = get_unaligned_be16(&cdb[8]);
- /*
- * Determine if this is TCM/PSCSI device and we should disable
- * internal emulation for this CDB.
- */
- passthrough = (dev->transport->transport_type ==
- TRANSPORT_PLUGIN_PHBA_PDEV);
-
switch (service_action) {
case XDWRITEREAD_32:
sectors = transport_get_sectors_32(cdb, cmd, §or_ret);
cmd->t_task_lba = transport_lba_64_ext(cdb);
cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB;
+ /*
+ * Do now allow BIDI commands for passthrough mode.
+ */
if (passthrough)
goto out_unsupported_cdb;
+
/*
* Setup BIDI XOR callback to be run during after I/O
* completion.
if (target_check_write_same_discard(&cdb[10], dev) < 0)
goto out_invalid_cdb_field;
-
+ if (!passthrough)
+ cmd->execute_task = target_emulate_write_same;
break;
default:
pr_err("VARIABLE_LENGTH_CMD service action"
/*
* Check for emulated MI_REPORT_TARGET_PGS.
*/
- if (cdb[1] == MI_REPORT_TARGET_PGS) {
- cmd->transport_emulate_cdb =
- (su_dev->t10_alua.alua_type ==
- SPC3_ALUA_EMULATED) ?
- core_emulate_report_target_port_groups :
- NULL;
+ if (cdb[1] == MI_REPORT_TARGET_PGS &&
+ su_dev->t10_alua.alua_type == SPC3_ALUA_EMULATED) {
+ cmd->execute_task =
+ target_emulate_report_target_port_groups;
}
size = (cdb[6] << 24) | (cdb[7] << 16) |
(cdb[8] << 8) | cdb[9];
case MODE_SENSE:
size = cdb[4];
cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
+ if (!passthrough)
+ cmd->execute_task = target_emulate_modesense;
break;
case MODE_SENSE_10:
+ size = (cdb[7] << 8) + cdb[8];
+ cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
+ if (!passthrough)
+ cmd->execute_task = target_emulate_modesense;
+ break;
case GPCMD_READ_BUFFER_CAPACITY:
case GPCMD_SEND_OPC:
case LOG_SELECT:
cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
break;
case PERSISTENT_RESERVE_IN:
+ if (su_dev->t10_pr.res_type == SPC3_PERSISTENT_RESERVATIONS)
+ cmd->execute_task = target_scsi3_emulate_pr_in;
+ size = (cdb[7] << 8) + cdb[8];
+ cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
+ break;
case PERSISTENT_RESERVE_OUT:
- cmd->transport_emulate_cdb =
- (su_dev->t10_pr.res_type ==
- SPC3_PERSISTENT_RESERVATIONS) ?
- core_scsi3_emulate_pr : NULL;
+ if (su_dev->t10_pr.res_type == SPC3_PERSISTENT_RESERVATIONS)
+ cmd->execute_task = target_scsi3_emulate_pr_out;
size = (cdb[7] << 8) + cdb[8];
cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
break;
*
* Check for emulated MO_SET_TARGET_PGS.
*/
- if (cdb[1] == MO_SET_TARGET_PGS) {
- cmd->transport_emulate_cdb =
- (su_dev->t10_alua.alua_type ==
- SPC3_ALUA_EMULATED) ?
- core_emulate_set_target_port_groups :
- NULL;
+ if (cdb[1] == MO_SET_TARGET_PGS &&
+ su_dev->t10_alua.alua_type == SPC3_ALUA_EMULATED) {
+ cmd->execute_task =
+ target_emulate_set_target_port_groups;
}
size = (cdb[6] << 24) | (cdb[7] << 16) |
if (cmd->se_dev->dev_task_attr_type == SAM_TASK_ATTR_EMULATED)
cmd->sam_task_attr = MSG_HEAD_TAG;
cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
+ if (!passthrough)
+ cmd->execute_task = target_emulate_inquiry;
break;
case READ_BUFFER:
size = (cdb[6] << 16) + (cdb[7] << 8) + cdb[8];
case READ_CAPACITY:
size = READ_CAP_LEN;
cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
+ if (!passthrough)
+ cmd->execute_task = target_emulate_readcapacity;
break;
case READ_MEDIA_SERIAL_NUMBER:
case SECURITY_PROTOCOL_IN:
cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
break;
case SERVICE_ACTION_IN:
+ switch (cmd->t_task_cdb[1] & 0x1f) {
+ case SAI_READ_CAPACITY_16:
+ if (!passthrough)
+ cmd->execute_task =
+ target_emulate_readcapacity_16;
+ break;
+ default:
+ if (passthrough)
+ break;
+
+ pr_err("Unsupported SA: 0x%02x\n",
+ cmd->t_task_cdb[1] & 0x1f);
+ goto out_unsupported_cdb;
+ }
+ /*FALLTHROUGH*/
case ACCESS_CONTROL_IN:
case ACCESS_CONTROL_OUT:
case EXTENDED_COPY:
case REQUEST_SENSE:
size = cdb[4];
cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
+ if (!passthrough)
+ cmd->execute_task = target_emulate_request_sense;
break;
case READ_ELEMENT_STATUS:
size = 65536 * cdb[7] + 256 * cdb[8] + cdb[9];
* is running in SPC_PASSTHROUGH, and wants reservations
* emulation disabled.
*/
- cmd->transport_emulate_cdb =
- (su_dev->t10_pr.res_type !=
- SPC_PASSTHROUGH) ?
- core_scsi2_emulate_crh : NULL;
+ if (su_dev->t10_pr.res_type != SPC_PASSTHROUGH)
+ cmd->execute_task = target_scsi2_reservation_reserve;
cmd->se_cmd_flags |= SCF_SCSI_NON_DATA_CDB;
break;
case RELEASE:
else
size = cmd->data_length;
- cmd->transport_emulate_cdb =
- (su_dev->t10_pr.res_type !=
- SPC_PASSTHROUGH) ?
- core_scsi2_emulate_crh : NULL;
+ if (su_dev->t10_pr.res_type != SPC_PASSTHROUGH)
+ cmd->execute_task = target_scsi2_reservation_release;
cmd->se_cmd_flags |= SCF_SCSI_NON_DATA_CDB;
break;
case SYNCHRONIZE_CACHE:
size = transport_get_size(sectors, cdb, cmd);
cmd->se_cmd_flags |= SCF_SCSI_NON_DATA_CDB;
- /*
- * For TCM/pSCSI passthrough, skip cmd->transport_emulate_cdb()
- */
- if (dev->transport->transport_type == TRANSPORT_PLUGIN_PHBA_PDEV)
+ if (passthrough)
break;
- /*
- * Set SCF_EMULATE_CDB_ASYNC to ensure asynchronous operation
- * for SYNCHRONIZE_CACHE* Immed=1 case in __transport_execute_tasks()
- */
- cmd->se_cmd_flags |= SCF_EMULATE_CDB_ASYNC;
+
/*
* Check to ensure that LBA + Range does not exceed past end of
* device for IBLOCK and FILEIO ->do_sync_cache() backend calls
if (transport_cmd_get_valid_sectors(cmd) < 0)
goto out_invalid_cdb_field;
}
+ cmd->execute_task = target_emulate_synchronize_cache;
break;
case UNMAP:
size = get_unaligned_be16(&cdb[7]);
cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
+ if (!passthrough)
+ cmd->execute_task = target_emulate_unmap;
break;
case WRITE_SAME_16:
sectors = transport_get_sectors_16(cdb, cmd, §or_ret);
if (target_check_write_same_discard(&cdb[1], dev) < 0)
goto out_invalid_cdb_field;
+ if (!passthrough)
+ cmd->execute_task = target_emulate_write_same;
break;
case WRITE_SAME:
sectors = transport_get_sectors_10(cdb, cmd, §or_ret);
*/
if (target_check_write_same_discard(&cdb[1], dev) < 0)
goto out_invalid_cdb_field;
+ if (!passthrough)
+ cmd->execute_task = target_emulate_write_same;
break;
case ALLOW_MEDIUM_REMOVAL:
- case GPCMD_CLOSE_TRACK:
case ERASE:
- case INITIALIZE_ELEMENT_STATUS:
- case GPCMD_LOAD_UNLOAD:
case REZERO_UNIT:
case SEEK_10:
- case GPCMD_SET_SPEED:
case SPACE:
case START_STOP:
case TEST_UNIT_READY:
case VERIFY:
case WRITE_FILEMARKS:
+ cmd->se_cmd_flags |= SCF_SCSI_NON_DATA_CDB;
+ if (!passthrough)
+ cmd->execute_task = target_emulate_noop;
+ break;
+ case GPCMD_CLOSE_TRACK:
+ case INITIALIZE_ELEMENT_STATUS:
+ case GPCMD_LOAD_UNLOAD:
+ case GPCMD_SET_SPEED:
case MOVE_MEDIUM:
cmd->se_cmd_flags |= SCF_SCSI_NON_DATA_CDB;
break;
case REPORT_LUNS:
- cmd->transport_emulate_cdb =
- transport_core_report_lun_response;
+ cmd->execute_task = target_report_luns;
size = (cdb[6] << 24) | (cdb[7] << 16) | (cdb[8] << 8) | cdb[9];
/*
* Do implict HEAD_OF_QUEUE processing for REPORT_LUNS
cmd->data_length = size;
}
+ /* reject any command that we don't have a handler for */
+ if (!(passthrough || cmd->execute_task ||
+ (cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB)))
+ goto out_unsupported_cdb;
+
/* Let's limit control cdbs to a page, for simplicity's sake. */
if ((cmd->se_cmd_flags & SCF_SCSI_CONTROL_SG_IO_CDB) &&
size > PAGE_SIZE)
if (cmd->scsi_status) {
ret = transport_send_check_condition_and_sense(
cmd, reason, 1);
- if (ret == -EAGAIN)
+ if (ret == -EAGAIN || ret == -ENOMEM)
goto queue_full;
transport_lun_remove_cmd(cmd);
spin_unlock(&cmd->se_lun->lun_sep_lock);
ret = cmd->se_tfo->queue_data_in(cmd);
- if (ret == -EAGAIN)
+ if (ret == -EAGAIN || ret == -ENOMEM)
goto queue_full;
break;
case DMA_TO_DEVICE:
}
spin_unlock(&cmd->se_lun->lun_sep_lock);
ret = cmd->se_tfo->queue_data_in(cmd);
- if (ret == -EAGAIN)
+ if (ret == -EAGAIN || ret == -ENOMEM)
goto queue_full;
break;
}
/* Fall through for DMA_TO_DEVICE */
case DMA_NONE:
ret = cmd->se_tfo->queue_status(cmd);
- if (ret == -EAGAIN)
+ if (ret == -EAGAIN || ret == -ENOMEM)
goto queue_full;
break;
default:
static void transport_write_pending_qf(struct se_cmd *cmd)
{
- if (cmd->se_tfo->write_pending(cmd) == -EAGAIN) {
+ int ret;
+
+ ret = cmd->se_tfo->write_pending(cmd);
+ if (ret == -EAGAIN || ret == -ENOMEM) {
pr_debug("Handling write_pending QUEUE__FULL: se_cmd: %p\n",
cmd);
transport_handle_queue_full(cmd, cmd->se_dev);
* frontend know that WRITE buffers are ready.
*/
ret = cmd->se_tfo->write_pending(cmd);
- if (ret == -EAGAIN)
+ if (ret == -EAGAIN || ret == -ENOMEM)
goto queue_full;
else if (ret < 0)
return ret;
pr_debug("Handling write_pending QUEUE__FULL: se_cmd: %p\n", cmd);
cmd->t_state = TRANSPORT_COMPLETE_QF_WP;
transport_handle_queue_full(cmd, cmd->se_dev);
- return ret;
+ return 0;
}
/**
core_tmr_release_req(cmd->se_tmr_req);
if (cmd->t_task_cdb != cmd->__t_task_cdb)
kfree(cmd->t_task_cdb);
+ /*
+ * Check if target_wait_for_sess_cmds() is expecting to
+ * release se_cmd directly here..
+ */
+ if (cmd->check_release != 0 && cmd->se_tfo->check_release_cmd)
+ if (cmd->se_tfo->check_release_cmd(cmd) != 0)
+ return;
+
cmd->se_tfo->release_cmd(cmd);
}
EXPORT_SYMBOL(transport_release_cmd);
}
EXPORT_SYMBOL(transport_generic_free_cmd);
+/* target_get_sess_cmd - Add command to active ->sess_cmd_list
+ * @se_sess: session to reference
+ * @se_cmd: command descriptor to add
+ */
+void target_get_sess_cmd(struct se_session *se_sess, struct se_cmd *se_cmd)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&se_sess->sess_cmd_lock, flags);
+ list_add_tail(&se_cmd->se_cmd_list, &se_sess->sess_cmd_list);
+ se_cmd->check_release = 1;
+ spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags);
+}
+EXPORT_SYMBOL(target_get_sess_cmd);
+
+/* target_put_sess_cmd - Check for active I/O shutdown or list delete
+ * @se_sess: session to reference
+ * @se_cmd: command descriptor to drop
+ */
+int target_put_sess_cmd(struct se_session *se_sess, struct se_cmd *se_cmd)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&se_sess->sess_cmd_lock, flags);
+ if (list_empty(&se_cmd->se_cmd_list)) {
+ spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags);
+ WARN_ON(1);
+ return 0;
+ }
+
+ if (se_sess->sess_tearing_down && se_cmd->cmd_wait_set) {
+ spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags);
+ complete(&se_cmd->cmd_wait_comp);
+ return 1;
+ }
+ list_del(&se_cmd->se_cmd_list);
+ spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(target_put_sess_cmd);
+
+/* target_splice_sess_cmd_list - Split active cmds into sess_wait_list
+ * @se_sess: session to split
+ */
+void target_splice_sess_cmd_list(struct se_session *se_sess)
+{
+ struct se_cmd *se_cmd;
+ unsigned long flags;
+
+ WARN_ON(!list_empty(&se_sess->sess_wait_list));
+ INIT_LIST_HEAD(&se_sess->sess_wait_list);
+
+ spin_lock_irqsave(&se_sess->sess_cmd_lock, flags);
+ se_sess->sess_tearing_down = 1;
+
+ list_splice_init(&se_sess->sess_cmd_list, &se_sess->sess_wait_list);
+
+ list_for_each_entry(se_cmd, &se_sess->sess_wait_list, se_cmd_list)
+ se_cmd->cmd_wait_set = 1;
+
+ spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags);
+}
+EXPORT_SYMBOL(target_splice_sess_cmd_list);
+
+/* target_wait_for_sess_cmds - Wait for outstanding descriptors
+ * @se_sess: session to wait for active I/O
+ * @wait_for_tasks: Make extra transport_wait_for_tasks call
+ */
+void target_wait_for_sess_cmds(
+ struct se_session *se_sess,
+ int wait_for_tasks)
+{
+ struct se_cmd *se_cmd, *tmp_cmd;
+ bool rc = false;
+
+ list_for_each_entry_safe(se_cmd, tmp_cmd,
+ &se_sess->sess_wait_list, se_cmd_list) {
+ list_del(&se_cmd->se_cmd_list);
+
+ pr_debug("Waiting for se_cmd: %p t_state: %d, fabric state:"
+ " %d\n", se_cmd, se_cmd->t_state,
+ se_cmd->se_tfo->get_cmd_state(se_cmd));
+
+ if (wait_for_tasks) {
+ pr_debug("Calling transport_wait_for_tasks se_cmd: %p t_state: %d,"
+ " fabric state: %d\n", se_cmd, se_cmd->t_state,
+ se_cmd->se_tfo->get_cmd_state(se_cmd));
+
+ rc = transport_wait_for_tasks(se_cmd);
+
+ pr_debug("After transport_wait_for_tasks se_cmd: %p t_state: %d,"
+ " fabric state: %d\n", se_cmd, se_cmd->t_state,
+ se_cmd->se_tfo->get_cmd_state(se_cmd));
+ }
+
+ if (!rc) {
+ wait_for_completion(&se_cmd->cmd_wait_comp);
+ pr_debug("After cmd_wait_comp: se_cmd: %p t_state: %d"
+ " fabric state: %d\n", se_cmd, se_cmd->t_state,
+ se_cmd->se_tfo->get_cmd_state(se_cmd));
+ }
+
+ se_cmd->se_tfo->release_cmd(se_cmd);
+ }
+}
+EXPORT_SYMBOL(target_wait_for_sess_cmds);
+
/* transport_lun_wait_for_tasks():
*
* Called from ConfigFS context to stop the passed struct se_cmd to allow
* Called from frontend fabric context to wait for storage engine
* to pause and/or release frontend generated struct se_cmd.
*/
-void transport_wait_for_tasks(struct se_cmd *cmd)
+bool transport_wait_for_tasks(struct se_cmd *cmd)
{
unsigned long flags;
spin_lock_irqsave(&cmd->t_state_lock, flags);
if (!(cmd->se_cmd_flags & SCF_SE_LUN_CMD) && !(cmd->se_tmr_req)) {
spin_unlock_irqrestore(&cmd->t_state_lock, flags);
- return;
+ return false;
}
/*
* Only perform a possible wait_for_tasks if SCF_SUPPORTED_SAM_OPCODE
*/
if (!(cmd->se_cmd_flags & SCF_SUPPORTED_SAM_OPCODE) && !cmd->se_tmr_req) {
spin_unlock_irqrestore(&cmd->t_state_lock, flags);
- return;
+ return false;
}
/*
* If we are already stopped due to an external event (ie: LUN shutdown)
if (!atomic_read(&cmd->t_transport_active) ||
atomic_read(&cmd->t_transport_aborted)) {
spin_unlock_irqrestore(&cmd->t_state_lock, flags);
- return;
+ return false;
}
atomic_set(&cmd->t_transport_stop, 1);
cmd->se_tfo->get_task_tag(cmd));
spin_unlock_irqrestore(&cmd->t_state_lock, flags);
+
+ return true;
}
EXPORT_SYMBOL(transport_wait_for_tasks);
break;
}
ret = transport_generic_new_cmd(cmd);
- if (ret == -EAGAIN)
- break;
- else if (ret < 0) {
+ if (ret < 0) {
cmd->transport_error_status = ret;
transport_generic_request_failure(cmd,
0, (cmd->data_direction !=
case TRANSPORT_PROCESS_WRITE:
transport_generic_process_write(cmd);
break;
- case TRANSPORT_FREE_CMD_INTR:
- transport_generic_free_cmd(cmd, 0);
- break;
case TRANSPORT_PROCESS_TMR:
transport_generic_do_tmr(cmd);
break;
/*
* IO methods.
*/
-void ft_check_stop_free(struct se_cmd *);
+int ft_check_stop_free(struct se_cmd *);
void ft_release_cmd(struct se_cmd *);
int ft_queue_status(struct se_cmd *);
int ft_queue_data_in(struct se_cmd *);
ft_free_cmd(cmd);
}
-void ft_check_stop_free(struct se_cmd *se_cmd)
+int ft_check_stop_free(struct se_cmd *se_cmd)
{
transport_generic_free_cmd(se_cmd, 0);
+ return 1;
}
/*
return;
if (delay > 1000)
- schedule_delayed_work(&(tz->poll_queue),
+ queue_delayed_work(system_freezable_wq, &(tz->poll_queue),
round_jiffies(msecs_to_jiffies(delay)));
else
- schedule_delayed_work(&(tz->poll_queue),
+ queue_delayed_work(system_freezable_wq, &(tz->poll_queue),
msecs_to_jiffies(delay));
}
help
iSeries machines support a hypervisor virtual console.
+config HVC_OPAL
+ bool "OPAL Console support"
+ depends on PPC_POWERNV
+ select HVC_DRIVER
+ select HVC_IRQ
+ default y
+ help
+ PowerNV machines running under OPAL need that driver to get a console
+
config HVC_RTAS
bool "IBM RTAS Console support"
depends on PPC_RTAS
obj-$(CONFIG_HVC_CONSOLE) += hvc_vio.o hvsi_lib.o
+obj-$(CONFIG_HVC_OPAL) += hvc_opal.o hvsi_lib.o
obj-$(CONFIG_HVC_OLD_HVSI) += hvsi.o
obj-$(CONFIG_HVC_ISERIES) += hvc_iseries.o
obj-$(CONFIG_HVC_RTAS) += hvc_rtas.o
* find index to use:
* see if this vterm id matches one registered for console.
*/
- for (i = 0; i < MAX_NR_HVC_CONSOLES; i++)
+ for (i=0; i < MAX_NR_HVC_CONSOLES; i++)
if (vtermnos[i] == hp->vtermno &&
cons_ops[i] == hp->ops)
break;
i = ++last_hvc;
hp->index = i;
- hvc_console.index = i;
- vtermnos[i] = vtermno;
- cons_ops[i] = ops;
list_add_tail(&(hp->next), &hvc_structs);
spin_unlock(&hvc_structs_lock);
- register_console(&hvc_console);
return hp;
}
unsigned long flags;
struct tty_struct *tty;
- unregister_console(&hvc_console);
spin_lock_irqsave(&hp->lock, flags);
tty = tty_kref_get(hp->tty);
#include <linux/types.h>
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/console.h>
--- /dev/null
+/*
+ * opal driver interface to hvc_console.c
+ *
+ * Copyright 2011 Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#undef DEBUG
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/console.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/export.h>
+
+#include <asm/hvconsole.h>
+#include <asm/prom.h>
+#include <asm/firmware.h>
+#include <asm/hvsi.h>
+#include <asm/udbg.h>
+#include <asm/opal.h>
+
+#include "hvc_console.h"
+
+static const char hvc_opal_name[] = "hvc_opal";
+
+static struct of_device_id hvc_opal_match[] __devinitdata = {
+ { .name = "serial", .compatible = "ibm,opal-console-raw" },
+ { .name = "serial", .compatible = "ibm,opal-console-hvsi" },
+ { },
+};
+
+typedef enum hv_protocol {
+ HV_PROTOCOL_RAW,
+ HV_PROTOCOL_HVSI
+} hv_protocol_t;
+
+struct hvc_opal_priv {
+ hv_protocol_t proto; /* Raw data or HVSI packets */
+ struct hvsi_priv hvsi; /* HVSI specific data */
+};
+static struct hvc_opal_priv *hvc_opal_privs[MAX_NR_HVC_CONSOLES];
+
+/* For early boot console */
+static struct hvc_opal_priv hvc_opal_boot_priv;
+static u32 hvc_opal_boot_termno;
+
+static const struct hv_ops hvc_opal_raw_ops = {
+ .get_chars = opal_get_chars,
+ .put_chars = opal_put_chars,
+ .notifier_add = notifier_add_irq,
+ .notifier_del = notifier_del_irq,
+ .notifier_hangup = notifier_hangup_irq,
+};
+
+static int hvc_opal_hvsi_get_chars(uint32_t vtermno, char *buf, int count)
+{
+ struct hvc_opal_priv *pv = hvc_opal_privs[vtermno];
+
+ if (WARN_ON(!pv))
+ return -ENODEV;
+
+ return hvsilib_get_chars(&pv->hvsi, buf, count);
+}
+
+static int hvc_opal_hvsi_put_chars(uint32_t vtermno, const char *buf, int count)
+{
+ struct hvc_opal_priv *pv = hvc_opal_privs[vtermno];
+
+ if (WARN_ON(!pv))
+ return -ENODEV;
+
+ return hvsilib_put_chars(&pv->hvsi, buf, count);
+}
+
+static int hvc_opal_hvsi_open(struct hvc_struct *hp, int data)
+{
+ struct hvc_opal_priv *pv = hvc_opal_privs[hp->vtermno];
+ int rc;
+
+ pr_devel("HVSI@%x: do open !\n", hp->vtermno);
+
+ rc = notifier_add_irq(hp, data);
+ if (rc)
+ return rc;
+
+ return hvsilib_open(&pv->hvsi, hp);
+}
+
+static void hvc_opal_hvsi_close(struct hvc_struct *hp, int data)
+{
+ struct hvc_opal_priv *pv = hvc_opal_privs[hp->vtermno];
+
+ pr_devel("HVSI@%x: do close !\n", hp->vtermno);
+
+ hvsilib_close(&pv->hvsi, hp);
+
+ notifier_del_irq(hp, data);
+}
+
+void hvc_opal_hvsi_hangup(struct hvc_struct *hp, int data)
+{
+ struct hvc_opal_priv *pv = hvc_opal_privs[hp->vtermno];
+
+ pr_devel("HVSI@%x: do hangup !\n", hp->vtermno);
+
+ hvsilib_close(&pv->hvsi, hp);
+
+ notifier_hangup_irq(hp, data);
+}
+
+static int hvc_opal_hvsi_tiocmget(struct hvc_struct *hp)
+{
+ struct hvc_opal_priv *pv = hvc_opal_privs[hp->vtermno];
+
+ if (!pv)
+ return -EINVAL;
+ return pv->hvsi.mctrl;
+}
+
+static int hvc_opal_hvsi_tiocmset(struct hvc_struct *hp, unsigned int set,
+ unsigned int clear)
+{
+ struct hvc_opal_priv *pv = hvc_opal_privs[hp->vtermno];
+
+ pr_devel("HVSI@%x: Set modem control, set=%x,clr=%x\n",
+ hp->vtermno, set, clear);
+
+ if (set & TIOCM_DTR)
+ hvsilib_write_mctrl(&pv->hvsi, 1);
+ else if (clear & TIOCM_DTR)
+ hvsilib_write_mctrl(&pv->hvsi, 0);
+
+ return 0;
+}
+
+static const struct hv_ops hvc_opal_hvsi_ops = {
+ .get_chars = hvc_opal_hvsi_get_chars,
+ .put_chars = hvc_opal_hvsi_put_chars,
+ .notifier_add = hvc_opal_hvsi_open,
+ .notifier_del = hvc_opal_hvsi_close,
+ .notifier_hangup = hvc_opal_hvsi_hangup,
+ .tiocmget = hvc_opal_hvsi_tiocmget,
+ .tiocmset = hvc_opal_hvsi_tiocmset,
+};
+
+static int __devinit hvc_opal_probe(struct platform_device *dev)
+{
+ const struct hv_ops *ops;
+ struct hvc_struct *hp;
+ struct hvc_opal_priv *pv;
+ hv_protocol_t proto;
+ unsigned int termno, boot = 0;
+ const __be32 *reg;
+
+ if (of_device_is_compatible(dev->dev.of_node, "ibm,opal-console-raw")) {
+ proto = HV_PROTOCOL_RAW;
+ ops = &hvc_opal_raw_ops;
+ } else if (of_device_is_compatible(dev->dev.of_node,
+ "ibm,opal-console-hvsi")) {
+ proto = HV_PROTOCOL_HVSI;
+ ops = &hvc_opal_hvsi_ops;
+ } else {
+ pr_err("hvc_opal: Unkown protocol for %s\n",
+ dev->dev.of_node->full_name);
+ return -ENXIO;
+ }
+
+ reg = of_get_property(dev->dev.of_node, "reg", NULL);
+ termno = reg ? be32_to_cpup(reg) : 0;
+
+ /* Is it our boot one ? */
+ if (hvc_opal_privs[termno] == &hvc_opal_boot_priv) {
+ pv = hvc_opal_privs[termno];
+ boot = 1;
+ } else if (hvc_opal_privs[termno] == NULL) {
+ pv = kzalloc(sizeof(struct hvc_opal_priv), GFP_KERNEL);
+ if (!pv)
+ return -ENOMEM;
+ pv->proto = proto;
+ hvc_opal_privs[termno] = pv;
+ if (proto == HV_PROTOCOL_HVSI)
+ hvsilib_init(&pv->hvsi, opal_get_chars, opal_put_chars,
+ termno, 0);
+
+ /* Instanciate now to establish a mapping index==vtermno */
+ hvc_instantiate(termno, termno, ops);
+ } else {
+ pr_err("hvc_opal: Device %s has duplicate terminal number #%d\n",
+ dev->dev.of_node->full_name, termno);
+ return -ENXIO;
+ }
+
+ pr_info("hvc%d: %s protocol on %s%s\n", termno,
+ proto == HV_PROTOCOL_RAW ? "raw" : "hvsi",
+ dev->dev.of_node->full_name,
+ boot ? " (boot console)" : "");
+
+ /* We don't do IRQ yet */
+ hp = hvc_alloc(termno, 0, ops, MAX_VIO_PUT_CHARS);
+ if (IS_ERR(hp))
+ return PTR_ERR(hp);
+ dev_set_drvdata(&dev->dev, hp);
+
+ return 0;
+}
+
+static int __devexit hvc_opal_remove(struct platform_device *dev)
+{
+ struct hvc_struct *hp = dev_get_drvdata(&dev->dev);
+ int rc, termno;
+
+ termno = hp->vtermno;
+ rc = hvc_remove(hp);
+ if (rc == 0) {
+ if (hvc_opal_privs[termno] != &hvc_opal_boot_priv)
+ kfree(hvc_opal_privs[termno]);
+ hvc_opal_privs[termno] = NULL;
+ }
+ return rc;
+}
+
+static struct platform_driver hvc_opal_driver = {
+ .probe = hvc_opal_probe,
+ .remove = __devexit_p(hvc_opal_remove),
+ .driver = {
+ .name = hvc_opal_name,
+ .owner = THIS_MODULE,
+ .of_match_table = hvc_opal_match,
+ }
+};
+
+static int __init hvc_opal_init(void)
+{
+ if (!firmware_has_feature(FW_FEATURE_OPAL))
+ return -ENODEV;
+
+ /* Register as a vio device to receive callbacks */
+ return platform_driver_register(&hvc_opal_driver);
+}
+module_init(hvc_opal_init);
+
+static void __exit hvc_opal_exit(void)
+{
+ platform_driver_unregister(&hvc_opal_driver);
+}
+module_exit(hvc_opal_exit);
+
+static void udbg_opal_putc(char c)
+{
+ unsigned int termno = hvc_opal_boot_termno;
+ int count = -1;
+
+ if (c == '\n')
+ udbg_opal_putc('\r');
+
+ do {
+ switch(hvc_opal_boot_priv.proto) {
+ case HV_PROTOCOL_RAW:
+ count = opal_put_chars(termno, &c, 1);
+ break;
+ case HV_PROTOCOL_HVSI:
+ count = hvc_opal_hvsi_put_chars(termno, &c, 1);
+ break;
+ }
+ } while(count == 0 || count == -EAGAIN);
+}
+
+static int udbg_opal_getc_poll(void)
+{
+ unsigned int termno = hvc_opal_boot_termno;
+ int rc = 0;
+ char c;
+
+ switch(hvc_opal_boot_priv.proto) {
+ case HV_PROTOCOL_RAW:
+ rc = opal_get_chars(termno, &c, 1);
+ break;
+ case HV_PROTOCOL_HVSI:
+ rc = hvc_opal_hvsi_get_chars(termno, &c, 1);
+ break;
+ }
+ if (!rc)
+ return -1;
+ return c;
+}
+
+static int udbg_opal_getc(void)
+{
+ int ch;
+ for (;;) {
+ ch = udbg_opal_getc_poll();
+ if (ch == -1) {
+ /* This shouldn't be needed...but... */
+ volatile unsigned long delay;
+ for (delay=0; delay < 2000000; delay++)
+ ;
+ } else {
+ return ch;
+ }
+ }
+}
+
+static void udbg_init_opal_common(void)
+{
+ udbg_putc = udbg_opal_putc;
+ udbg_getc = udbg_opal_getc;
+ udbg_getc_poll = udbg_opal_getc_poll;
+ tb_ticks_per_usec = 0x200; /* Make udelay not suck */
+}
+
+void __init hvc_opal_init_early(void)
+{
+ struct device_node *stdout_node = NULL;
+ const u32 *termno;
+ const char *name = NULL;
+ const struct hv_ops *ops;
+ u32 index;
+
+ /* find the boot console from /chosen/stdout */
+ if (of_chosen)
+ name = of_get_property(of_chosen, "linux,stdout-path", NULL);
+ if (name) {
+ stdout_node = of_find_node_by_path(name);
+ if (!stdout_node) {
+ pr_err("hvc_opal: Failed to locate default console!\n");
+ return;
+ }
+ } else {
+ struct device_node *opal, *np;
+
+ /* Current OPAL takeover doesn't provide the stdout
+ * path, so we hard wire it
+ */
+ opal = of_find_node_by_path("/ibm,opal/consoles");
+ if (opal)
+ pr_devel("hvc_opal: Found consoles in new location\n");
+ if (!opal) {
+ opal = of_find_node_by_path("/ibm,opal");
+ if (opal)
+ pr_devel("hvc_opal: "
+ "Found consoles in old location\n");
+ }
+ if (!opal)
+ return;
+ for_each_child_of_node(opal, np) {
+ if (!strcmp(np->name, "serial")) {
+ stdout_node = np;
+ break;
+ }
+ }
+ of_node_put(opal);
+ }
+ if (!stdout_node)
+ return;
+ termno = of_get_property(stdout_node, "reg", NULL);
+ index = termno ? *termno : 0;
+ if (index >= MAX_NR_HVC_CONSOLES)
+ return;
+ hvc_opal_privs[index] = &hvc_opal_boot_priv;
+
+ /* Check the protocol */
+ if (of_device_is_compatible(stdout_node, "ibm,opal-console-raw")) {
+ hvc_opal_boot_priv.proto = HV_PROTOCOL_RAW;
+ ops = &hvc_opal_raw_ops;
+ pr_devel("hvc_opal: Found RAW console\n");
+ }
+ else if (of_device_is_compatible(stdout_node,"ibm,opal-console-hvsi")) {
+ hvc_opal_boot_priv.proto = HV_PROTOCOL_HVSI;
+ ops = &hvc_opal_hvsi_ops;
+ hvsilib_init(&hvc_opal_boot_priv.hvsi, opal_get_chars,
+ opal_put_chars, index, 1);
+ /* HVSI, perform the handshake now */
+ hvsilib_establish(&hvc_opal_boot_priv.hvsi);
+ pr_devel("hvc_opal: Found HVSI console\n");
+ } else
+ goto out;
+ hvc_opal_boot_termno = index;
+ udbg_init_opal_common();
+ add_preferred_console("hvc", index, NULL);
+ hvc_instantiate(index, index, ops);
+out:
+ of_node_put(stdout_node);
+}
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL_RAW
+void __init udbg_init_debug_opal(void)
+{
+ u32 index = CONFIG_PPC_EARLY_DEBUG_OPAL_VTERMNO;
+ hvc_opal_privs[index] = &hvc_opal_boot_priv;
+ hvc_opal_boot_priv.proto = HV_PROTOCOL_RAW;
+ hvc_opal_boot_termno = index;
+ udbg_init_opal_common();
+}
+#endif /* CONFIG_PPC_EARLY_DEBUG_OPAL_RAW */
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL_HVSI
+void __init udbg_init_debug_opal_hvsi(void)
+{
+ u32 index = CONFIG_PPC_EARLY_DEBUG_OPAL_VTERMNO;
+ hvc_opal_privs[index] = &hvc_opal_boot_priv;
+ hvc_opal_boot_termno = index;
+ udbg_init_opal_common();
+ hvsilib_init(&hvc_opal_boot_priv.hvsi, opal_get_chars, opal_put_chars,
+ index, 1);
+ hvsilib_establish(&hvc_opal_boot_priv.hvsi);
+}
+#endif /* CONFIG_PPC_EARLY_DEBUG_OPAL_HVSI */
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/console.h>
+#include <linux/module.h>
#include <asm/hvconsole.h>
#include <asm/vio.h>
goto register_fail;
}
- hvcs_pi_buff = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ hvcs_pi_buff = (unsigned long *) __get_free_page(GFP_KERNEL);
if (!hvcs_pi_buff) {
rc = -ENOMEM;
goto buff_alloc_fail;
return 0;
kthread_fail:
- kfree(hvcs_pi_buff);
+ free_page((unsigned long)hvcs_pi_buff);
buff_alloc_fail:
tty_unregister_driver(hvcs_tty_driver);
register_fail:
kthread_stop(hvcs_task);
spin_lock(&hvcs_pi_lock);
- kfree(hvcs_pi_buff);
+ free_page((unsigned long)hvcs_pi_buff);
hvcs_pi_buff = NULL;
spin_unlock(&hvcs_pi_lock);
unsigned int tries, read = 0;
if (WARN_ON(!pv))
- return 0;
+ return -ENXIO;
/* If we aren't open, don't do anything in order to avoid races
* with connection establishment. The hvc core will call this
int rc, adjcount = min(count, HVSI_MAX_OUTGOING_DATA);
if (WARN_ON(!pv))
- return 0;
+ return -ENODEV;
dp.hdr.type = VS_DATA_PACKET_HEADER;
dp.hdr.len = adjcount + sizeof(struct hvsi_header);
static int debug;
module_param(debug, int, 0600);
-#define T1 (HZ/10)
-#define T2 (HZ/3)
-#define N2 3
+/* Defaults: these are from the specification */
+
+#define T1 10 /* 100mS */
+#define T2 34 /* 333mS */
+#define N2 3 /* Retry 3 times */
/* Use long timers for testing at low speed with debug on */
#ifdef DEBUG_TIMING
-#define T1 HZ
-#define T2 (2 * HZ)
+#define T1 100
+#define T2 200
#endif
/*
__raw_writel(value, p->membase + offset);
}
-static unsigned int tsi_serial_in(struct uart_port *p, int offset)
-{
- unsigned int tmp;
- offset = map_8250_in_reg(p, offset) << p->regshift;
- if (offset == UART_IIR) {
- tmp = readl(p->membase + (UART_IIR & ~3));
- return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */
- } else
- return readb(p->membase + offset);
-}
-
-static void tsi_serial_out(struct uart_port *p, int offset, int value)
-{
- offset = map_8250_out_reg(p, offset) << p->regshift;
- if (!((offset == UART_IER) && (value & UART_IER_UUE)))
- writeb(value, p->membase + offset);
-}
-
static unsigned int io_serial_in(struct uart_port *p, int offset)
{
offset = map_8250_in_reg(p, offset) << p->regshift;
p->serial_out = au_serial_out;
break;
- case UPIO_TSI:
- p->serial_in = tsi_serial_in;
- p->serial_out = tsi_serial_out;
- break;
-
default:
p->serial_in = io_serial_in;
p->serial_out = io_serial_out;
*
*
***********************************************************************/
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/console.h>
#include <linux/vt_kern.h>
#include <linux/input.h>
+#include <linux/module.h>
#define MAX_CONFIG_LEN 40
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/device.h>
+#include <linux/module.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
#include <linux/spi/spi.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/sfi.h>
+#include <linux/module.h>
#include <asm/mrst.h>
#include "max3107.h"
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/freezer.h>
+#include <linux/module.h>
#include "max3107.h"
static const struct baud_table brg26_ext[] = {
*
*/
#include <linux/init.h>
+#include <linux/export.h>
#include <linux/console.h>
#include <linux/serial.h>
#include <linux/serial_reg.h>
[SCLSR] = sci_reg_invalid,
},
+ /*
+ * Common SH-2(A) SCIF definitions for ports with FIFO data
+ * count registers.
+ */
+ [SCIx_SH2_SCIF_FIFODATA_REGTYPE] = {
+ [SCSMR] = { 0x00, 16 },
+ [SCBRR] = { 0x04, 8 },
+ [SCSCR] = { 0x08, 16 },
+ [SCxTDR] = { 0x0c, 8 },
+ [SCxSR] = { 0x10, 16 },
+ [SCxRDR] = { 0x14, 8 },
+ [SCFCR] = { 0x18, 16 },
+ [SCFDR] = { 0x1c, 16 },
+ [SCTFDR] = sci_reg_invalid,
+ [SCRFDR] = sci_reg_invalid,
+ [SCSPTR] = { 0x20, 16 },
+ [SCLSR] = { 0x24, 16 },
+ },
+
/*
* Common SH-3 SCIF definitions.
*/
#include <linux/platform_device.h>
#include <linux/ioport.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include "timbuart.h"
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/module.h>
#define XUARTPS_TTY_NAME "ttyPS"
#define XUARTPS_NAME "xuartps"
#include <linux/kernel.h>
#include <linux/major.h>
#include <linux/errno.h>
+#include <linux/export.h>
#include <linux/tty.h>
#include <linux/interrupt.h>
#include <linux/mm.h>
#include <linux/platform_device.h>
#include <linux/uio_driver.h>
#include <linux/stringify.h>
+#include <linux/module.h>
#include <linux/slab.h>
#define DRIVER_NAME "uio_pdrv"
#include <linux/uio_driver.h>
#include <linux/spinlock.h>
#include <linux/bitops.h>
+#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/stringify.h>
#include <linux/pm_runtime.h>
#include <linux/io.h>
#include <linux/list.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <linux/usb.h>
#include <linux/usb/c67x00.h>
#include <linux/device.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <linux/usb.h>
#include <linux/usb/quirks.h>
#include <linux/usb/hcd.h>
return -EAGAIN;
status = usb_suspend_both(udev, PMSG_AUTO_SUSPEND);
+
+ /* Allow a retry if autosuspend failed temporarily */
+ if (status == -EAGAIN || status == -EBUSY)
+ usb_mark_last_busy(udev);
+
/* The PM core reacts badly unless the return code is 0,
* -EAGAIN, or -EBUSY, so always return -EBUSY on an error.
*/
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/notifier.h>
#include <linux/usb.h>
#include <linux/mutex.h>
#include <linux/kernel.h>
#include <linux/utsname.h>
+#include <linux/module.h>
#include "u_ether.h"
#include "u_serial.h"
#include <linux/kallsyms.h>
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <linux/device.h>
#include <linux/utsname.h>
/* verbose messages */
#include <linux/kernel.h>
#include <linux/device.h>
+#include <linux/module.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/blkdev.h>
#include <linux/pagemap.h>
+#include <linux/export.h>
#include <asm/unaligned.h>
#include <linux/usb/composite.h>
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/device.h>
+#include <linux/module.h>
#include "u_serial.h"
#include "gadget_chips.h"
}
skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page,
- skb->len == 0, req->actual);
+ skb->len <= 1, req->actual);
page = NULL;
if (req->actual < req->length) { /* Last fragment */
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/device.h>
+#include <linux/module.h>
#include "g_zero.h"
#include "gadget_chips.h"
#include <linux/kref.h>
#include <linux/kthread.h>
#include <linux/limits.h>
+#include <linux/module.h>
#include <linux/rwsem.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
static inline enum usb_device_speed portscx_device_speed(u32 reg)
{
- switch (speed & PORTSCX_PORT_SPEED_MASK) {
+ switch (reg & PORTSCX_PORT_SPEED_MASK) {
case PORTSCX_PORT_SPEED_HIGH:
return USB_SPEED_HIGH;
case PORTSCX_PORT_SPEED_FULL:
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/utsname.h>
+#include <linux/module.h>
#include <linux/device.h>
#include <sound/core.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include "u_serial.h"
#include <linux/io.h>
#include <linux/of_platform.h>
#include <linux/clk.h>
+#include <linux/module.h>
struct fsl_usb2_dev_data {
char *dr_mode; /* controller mode */
#include <linux/usb.h>
#include <linux/io.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/usb/isp1760.h>
#include <linux/usb/hcd.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/export.h>
#include <linux/acpi.h>
#include <linux/dmi.h>
#include "pci-quirks.h"
#include <linux/kernel.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
+#include <linux/export.h>
#include "../../wusbcore/wusbhc.h"
*/
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/module.h>
#include <linux/uwb/umc.h>
#include "../../wusbcore/wusbhc.h"
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/gfp.h>
#include <asm/unaligned.h>
#include "xhci.h"
#include <linux/pci.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include "xhci.h"
#include <linux/types.h>
#include <linux/fs.h>
#include <linux/cdev.h>
+#include <linux/export.h>
#include <linux/usb.h>
#include <linux/poll.h>
#include <linux/compat.h>
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <linux/usb.h>
#include <linux/fs.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
#include <linux/slab.h>
#include <linux/time.h>
+#include <linux/export.h>
#include <linux/mutex.h>
#include <linux/debugfs.h>
#include <linux/scatterlist.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/module.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/usb.h>
*/
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/device.h>
#include <linux/usb/otg.h>
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <linux/usb.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <asm/unaligned.h>
#include <linux/tty.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <linux/tty_flip.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
+#include <linux/module.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include "usb.h"
#include "transport.h"
*/
#include <linux/highmem.h>
+#include <linux/export.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <linux/usb.h>
+#include <linux/module.h>
#include <linux/slab.h>
#include "usb.h"
#include <linux/sched.h>
#include <linux/gfp.h>
#include <linux/errno.h>
+#include <linux/export.h>
#include <linux/usb/quirks.h>
#include <linux/blkdev.h>
#include <linux/slab.h>
#include <linux/types.h>
+#include <linux/module.h>
#include <linux/usb.h>
#include <linux/usb/storage.h>
#include <linux/ctype.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
+#include <linux/export.h>
#include "wusbhc.h"
static void wusbhc_devconnect_acked_work(struct work_struct *work);
*/
#include <linux/usb/wusb.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include "wusbhc.h"
/* Initialize the MMCIEs handling mechanism */
* wusbhc_rh_start_port_reset() ??? unimplemented
*/
#include <linux/slab.h>
+#include <linux/export.h>
#include "wusbhc.h"
/*
#include <linux/slab.h>
#include <linux/usb/ch9.h>
#include <linux/random.h>
+#include <linux/export.h>
#include "wusbhc.h"
static void wusbhc_set_gtk_callback(struct urb *urb);
* FIXME: docs
*/
#include <linux/slab.h>
+#include <linux/module.h>
#include "wusbhc.h"
#include "wa-hc.h"
#include <linux/atomic.h>
#include <linux/bitmap.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include "wusbhc.h"
#include "wa-hc.h"
#include <linux/slab.h>
#include <linux/hash.h>
#include <linux/ratelimit.h>
+#include <linux/export.h>
#include "wa-hc.h"
#include "wusbhc.h"
*/
#include <linux/spinlock.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include "uwb-internal.h"
#include <linux/device.h>
#include <linux/uwb.h>
#include <linux/random.h>
+#include <linux/export.h>
/*
* i1480_rceb_check - Check RCEB for expected field values
*/
#include <linux/slab.h>
+#include <linux/export.h>
#include "uwb-internal.h"
/**
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/device.h>
+#include <linux/export.h>
#include <linux/err.h>
#include <linux/kdev_t.h>
#include <linux/random.h>
+#include <linux/stat.h>
#include "uwb-internal.h"
/* We initialize addresses to 0xff (invalid, as it is bcast) */
#include <linux/etherdevice.h>
#include <linux/usb.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include "uwb-internal.h"
#include <linux/timer.h>
#include <linux/slab.h>
#include <linux/err.h>
+#include <linux/export.h>
#include "uwb-internal.h"
#include <linux/kernel.h>
#include <linux/debugfs.h>
#include <linux/uwb.h>
+#include <linux/export.h>
#include "uwb-internal.h"
*/
#include <linux/kernel.h>
#include <linux/uwb.h>
+#include <linux/export.h>
#include "uwb-internal.h"
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/delay.h>
+#include <linux/export.h>
#include "uwb-internal.h"
#include <linux/uwb.h>
#include <linux/slab.h>
#include <linux/random.h>
+#include <linux/export.h>
#include "uwb-internal.h"
#include <linux/device.h>
#include <linux/err.h>
#include <linux/slab.h>
+#include <linux/stat.h>
#include "uwb-internal.h"
#include <linux/kernel.h>
#include <linux/sysfs.h>
#include <linux/workqueue.h>
+#include <linux/module.h>
#include <linux/uwb/umc.h>
#include <linux/pci.h>
* This file is released under the GNU GPL v2.
*/
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <linux/uwb/umc.h>
* This file is released under the GNU GPL v2.
*/
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/uwb/umc.h>
int __umc_driver_register(struct umc_driver *umc_drv, struct module *module,
*/
#include <linux/delay.h>
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/backlight.h>
#include <linux/gfp.h>
+#include <linux/module.h>
#include <mach/board.h>
#include <mach/cpu.h>
#include <linux/i2c.h>
#include <linux/backlight.h>
#include <linux/mfd/88pm860x.h>
+#include <linux/module.h>
#define MAX_BRIGHTNESS (0xFF)
#define MIN_BRIGHTNESS (0)
#include <linux/backlight.h>
#include <linux/mfd/adp5520.h>
#include <linux/slab.h>
+#include <linux/module.h>
struct adp5520_bl {
struct device *master;
*/
#include <linux/wait.h>
+#include <linux/module.h>
#include <linux/fb.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/backlight.h>
#include <linux/mfd/da903x.h>
#include <linux/slab.h>
+#include <linux/module.h>
#define DA9030_WLED_CONTROL 0x25
#define DA9030_WLED_CP_EN (1 << 6)
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/module.h>
#include <linux/io.h>
#include <linux/fb.h>
#include <linux/backlight.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/delay.h>
+#include <linux/module.h>
#include <linux/gpio.h>
#include <linux/lcd.h>
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/lcd.h>
#include <linux/backlight.h>
+#include <linux/module.h>
#include "ld9040_gamma.h"
#include <linux/spi/spi.h>
#include <linux/spi/lms283gf05.h>
+#include <linux/module.h>
struct lms283gf05_state {
struct spi_device *spi;
#include <linux/backlight.h>
#include <linux/mfd/max8925.h>
#include <linux/slab.h>
+#include <linux/module.h>
#define MAX_BRIGHTNESS (0xff)
#define MIN_BRIGHTNESS (0)
#include <linux/kernel.h>
#include <linux/lcd.h>
#include <linux/backlight.h>
+#include <linux/module.h>
#include "s6e63m0_gamma.h"
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/module.h>
#include <linux/fb.h>
#include <linux/backlight.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include "carminefb.h"
#include "carminefb_regs.h"
#include <linux/ioport.h>
#include <linux/uaccess.h>
#include <linux/platform_device.h>
+#include <linux/module.h>
/*
* Cursor position address
*/
#include <linux/platform_device.h>
+#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/clk.h>
/*
- * driver/vide/fb_ddc.c - DDC/EDID read support.
+ * drivers/video/fb_ddc.c - DDC/EDID read support.
*
* Copyright (C) 2006 Dennis Munsie <dmunsie@cecropia.com>
*
#include <linux/delay.h>
#include <linux/device.h>
+#include <linux/module.h>
#include <linux/fb.h>
#include <linux/i2c-algo-bit.h>
#include <linux/slab.h>
*/
#include <linux/fb.h>
#include <linux/notifier.h>
+#include <linux/export.h>
static BLOCKING_NOTIFIER_HEAD(fb_notifier_list);
#include <linux/i2c.h>
#include <linux/io.h>
#include <linux/delay.h>
+#include <linux/export.h>
#include "mb862xxfb.h"
#include "mb862xx_reg.h"
#include <linux/fb.h>
#include <linux/delay.h>
#include <linux/uaccess.h>
+#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <mach/msm_iomap.h>
#include <mach/msm_fb.h>
#include <linux/platform_device.h>
+#include <linux/export.h>
#include "mdp_hw.h"
#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/spi/spi.h>
+#include <linux/module.h>
#include <plat/lcd_mipid.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
+#include <linux/module.h>
#include <plat/dma.h>
#include <linux/kernel.h>
#include <linux/dma-mapping.h>
#include <linux/vmalloc.h>
+#include <linux/export.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/delay.h>
+#include <linux/export.h>
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/mutex.h>
+#include <linux/module.h>
#include <linux/semaphore.h>
#include <linux/seq_file.h>
#include <linux/platform_device.h>
#include <linux/kernel.h>
#include <linux/io.h>
+#include <linux/export.h>
#include <linux/err.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/kernel.h>
#include <linux/dma-mapping.h>
+#include <linux/export.h>
#include <linux/vmalloc.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/regulator/consumer.h>
+#include <linux/export.h>
#include <video/omapdss.h>
#include "dss.h"
#include <linux/mm.h>
#include <linux/omapfb.h>
#include <linux/vmalloc.h>
+#include <linux/export.h>
#include <video/omapdss.h>
#include <plat/vrfb.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/fb.h>
+#include <linux/module.h>
#include "savagefb.h"
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/types.h>
+#include <linux/module.h>
#include <video/mipi_display.h>
#include <video/sh_mipi_dsi.h>
#include <linux/console.h>
#include <linux/backlight.h>
#include <linux/gpio.h>
+#include <linux/module.h>
#include <video/sh_mobile_lcdc.h>
#include <video/sh_mobile_meram.h>
#include <linux/atomic.h>
#include <linux/platform_device.h>
#include <linux/via-core.h>
#include <linux/via-gpio.h>
+#include <linux/export.h>
/*
* The ports we know about. Note that the port-25 gpios are not
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/vmalloc.h>
+#include <linux/module.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <video/w100fb.h>
.poll = fsl_hv_poll,
.read = fsl_hv_read,
.unlocked_ioctl = fsl_hv_ioctl,
+ .compat_ioctl = fsl_hv_ioctl,
};
static struct miscdevice fsl_hv_misc_dev = {
#include <linux/virtio.h>
#include <linux/spinlock.h>
#include <linux/virtio_config.h>
+#include <linux/module.h>
/* Unique numbering for virtio devices. */
static unsigned int dev_index;
#include <linux/freezer.h>
#include <linux/delay.h>
#include <linux/slab.h>
+#include <linux/module.h>
struct virtio_balloon
{
static void virtio_pci_release_dev(struct device *_d)
{
- struct virtio_device *dev = container_of(_d, struct virtio_device,
- dev);
- struct virtio_pci_device *vp_dev = to_vp_device(dev);
-
- kfree(vp_dev);
+ /*
+ * No need for a release method as we allocate/free
+ * all devices together with the pci devices.
+ * Provide an empty one to avoid getting a warning from core.
+ */
}
/* the PCI probing function */
pci_iounmap(pci_dev, vp_dev->ioaddr);
pci_release_regions(pci_dev);
pci_disable_device(pci_dev);
+ kfree(vp_dev);
}
#ifdef CONFIG_PM
#include <linux/virtio_config.h>
#include <linux/device.h>
#include <linux/slab.h>
+#include <linux/module.h>
/* virtio guest is communicating with a virtual "device" that actually runs on
* a host processor. Memory barriers are used to control SMP effects. */
#include <linux/list.h>
#include <linux/sched.h> /* schedule_timeout() */
#include <linux/delay.h>
+#include <linux/export.h>
#include "w1_family.h"
#include "w1.h"
#include <linux/delay.h>
#include <linux/kthread.h>
#include <linux/slab.h>
+#include <linux/export.h>
+#include <linux/moduleparam.h>
#include "w1.h"
#include "w1_log.h"
config WM831X_WATCHDOG
tristate "WM831x watchdog"
depends on MFD_WM831X
+ select WATCHDOG_CORE
help
Support for the watchdog in the WM831x AudioPlus PMICs. When
the watchdog triggers the system will be reset.
config S3C2410_WATCHDOG
tristate "S3C2410 Watchdog"
depends on ARCH_S3C2410 || HAVE_S3C2410_WATCHDOG
+ select WATCHDOG_CORE
help
Watchdog timer block in the Samsung SoCs. This will reboot
the system when the timer expires with the watchdog enabled.
writew(U300_WDOG_SR_RESET_STATUS_RESET, virtbase + U300_WDOG_SR);
irq = platform_get_irq(pdev, 0);
- if (request_irq(irq, coh901327_interrupt, IRQF_DISABLED,
+ if (request_irq(irq, coh901327_interrupt, 0,
DRV_NAME " Bark", pdev)) {
ret = -EIO;
goto out_no_irq;
{
int ret;
- ret = request_irq(irq, eurwdt_interrupt, IRQF_DISABLED, "eurwdt", NULL);
+ ret = request_irq(irq, eurwdt_interrupt, 0, "eurwdt", NULL);
if (ret) {
printk(KERN_ERR "eurwdt: IRQ %d is not free.\n", irq);
goto out;
/*
* intel TCO Watchdog Driver
*
- * (c) Copyright 2006-2010 Wim Van Sebroeck <wim@iguana.be>.
+ * (c) Copyright 2006-2011 Wim Van Sebroeck <wim@iguana.be>.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
/* Module and version information */
#define DRV_NAME "iTCO_wdt"
-#define DRV_VERSION "1.06"
+#define DRV_VERSION "1.07"
#define PFX DRV_NAME ": "
/* Includes */
"Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+static int turn_SMI_watchdog_clear_off = 0;
+module_param(turn_SMI_watchdog_clear_off, int, 0);
+MODULE_PARM_DESC(turn_SMI_watchdog_clear_off,
+ "Turn off SMI clearing watchdog (default=0)");
+
/*
* Some TCO specific functions
*/
ret = -EIO;
goto out_unmap;
}
- /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
- val32 = inl(SMI_EN);
- val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */
- outl(val32, SMI_EN);
+ if (turn_SMI_watchdog_clear_off) {
+ /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
+ val32 = inl(SMI_EN);
+ val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */
+ outl(val32, SMI_EN);
+ }
/* The TCO I/O registers reside in a 32-byte range pointed to
by the TCOBASE value */
goto err_misc;
}
- ret = request_irq(wdt->irq, mpcore_wdt_fire, IRQF_DISABLED,
- "mpcore_wdt", wdt);
+ ret = request_irq(wdt->irq, mpcore_wdt_fire, 0, "mpcore_wdt", wdt);
if (ret) {
dev_printk(KERN_ERR, wdt->dev,
"cannot register IRQ%d for watchdog\n", wdt->irq);
irq = OCTEON_IRQ_WDOG0 + core;
if (request_irq(irq, octeon_wdt_poke_irq,
- IRQF_DISABLED, "octeon_wdt", octeon_wdt_poke_irq))
+ IRQF_NO_THREAD, "octeon_wdt", octeon_wdt_poke_irq))
panic("octeon_wdt: Couldn't obtain irq %d", irq);
cpumask_set_cpu(cpu, &irq_enabled_cpus);
#include <linux/moduleparam.h>
#include <linux/types.h>
#include <linux/timer.h>
-#include <linux/miscdevice.h>
+#include <linux/miscdevice.h> /* for MODULE_ALIAS_MISCDEV */
#include <linux/watchdog.h>
-#include <linux/fs.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/cpufreq.h>
#include <linux/slab.h>
+#include <linux/err.h>
#include <mach/map.h>
"0 to reboot (default 0)");
MODULE_PARM_DESC(debug, "Watchdog debug, set to >1 for debug (default 0)");
-static unsigned long open_lock;
static struct device *wdt_dev; /* platform device attached to */
static struct resource *wdt_mem;
static struct resource *wdt_irq;
static struct clk *wdt_clock;
static void __iomem *wdt_base;
static unsigned int wdt_count;
-static char expect_close;
static DEFINE_SPINLOCK(wdt_lock);
/* watchdog control routines */
/* functions */
-static void s3c2410wdt_keepalive(void)
+static int s3c2410wdt_keepalive(struct watchdog_device *wdd)
{
spin_lock(&wdt_lock);
writel(wdt_count, wdt_base + S3C2410_WTCNT);
spin_unlock(&wdt_lock);
+
+ return 0;
}
static void __s3c2410wdt_stop(void)
writel(wtcon, wdt_base + S3C2410_WTCON);
}
-static void s3c2410wdt_stop(void)
+static int s3c2410wdt_stop(struct watchdog_device *wdd)
{
spin_lock(&wdt_lock);
__s3c2410wdt_stop();
spin_unlock(&wdt_lock);
+
+ return 0;
}
-static void s3c2410wdt_start(void)
+static int s3c2410wdt_start(struct watchdog_device *wdd)
{
unsigned long wtcon;
writel(wdt_count, wdt_base + S3C2410_WTCNT);
writel(wtcon, wdt_base + S3C2410_WTCON);
spin_unlock(&wdt_lock);
+
+ return 0;
}
static inline int s3c2410wdt_is_running(void)
return readl(wdt_base + S3C2410_WTCON) & S3C2410_WTCON_ENABLE;
}
-static int s3c2410wdt_set_heartbeat(int timeout)
+static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd, unsigned timeout)
{
unsigned long freq = clk_get_rate(wdt_clock);
unsigned int count;
}
}
- tmr_margin = timeout;
-
DBG("%s: timeout=%d, divisor=%d, count=%d (%08x)\n",
__func__, timeout, divisor, count, count/divisor);
return 0;
}
-/*
- * /dev/watchdog handling
- */
-
-static int s3c2410wdt_open(struct inode *inode, struct file *file)
-{
- if (test_and_set_bit(0, &open_lock))
- return -EBUSY;
-
- if (nowayout)
- __module_get(THIS_MODULE);
-
- expect_close = 0;
-
- /* start the timer */
- s3c2410wdt_start();
- return nonseekable_open(inode, file);
-}
-
-static int s3c2410wdt_release(struct inode *inode, struct file *file)
-{
- /*
- * Shut off the timer.
- * Lock it in if it's a module and we set nowayout
- */
-
- if (expect_close == 42)
- s3c2410wdt_stop();
- else {
- dev_err(wdt_dev, "Unexpected close, not stopping watchdog\n");
- s3c2410wdt_keepalive();
- }
- expect_close = 0;
- clear_bit(0, &open_lock);
- return 0;
-}
-
-static ssize_t s3c2410wdt_write(struct file *file, const char __user *data,
- size_t len, loff_t *ppos)
-{
- /*
- * Refresh the timer.
- */
- if (len) {
- if (!nowayout) {
- size_t i;
-
- /* In case it was set long ago */
- expect_close = 0;
-
- for (i = 0; i != len; i++) {
- char c;
-
- if (get_user(c, data + i))
- return -EFAULT;
- if (c == 'V')
- expect_close = 42;
- }
- }
- s3c2410wdt_keepalive();
- }
- return len;
-}
-
#define OPTIONS (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE)
static const struct watchdog_info s3c2410_wdt_ident = {
.identity = "S3C2410 Watchdog",
};
-
-static long s3c2410wdt_ioctl(struct file *file, unsigned int cmd,
- unsigned long arg)
-{
- void __user *argp = (void __user *)arg;
- int __user *p = argp;
- int new_margin;
-
- switch (cmd) {
- case WDIOC_GETSUPPORT:
- return copy_to_user(argp, &s3c2410_wdt_ident,
- sizeof(s3c2410_wdt_ident)) ? -EFAULT : 0;
- case WDIOC_GETSTATUS:
- case WDIOC_GETBOOTSTATUS:
- return put_user(0, p);
- case WDIOC_KEEPALIVE:
- s3c2410wdt_keepalive();
- return 0;
- case WDIOC_SETTIMEOUT:
- if (get_user(new_margin, p))
- return -EFAULT;
- if (s3c2410wdt_set_heartbeat(new_margin))
- return -EINVAL;
- s3c2410wdt_keepalive();
- return put_user(tmr_margin, p);
- case WDIOC_GETTIMEOUT:
- return put_user(tmr_margin, p);
- default:
- return -ENOTTY;
- }
-}
-
-/* kernel interface */
-
-static const struct file_operations s3c2410wdt_fops = {
- .owner = THIS_MODULE,
- .llseek = no_llseek,
- .write = s3c2410wdt_write,
- .unlocked_ioctl = s3c2410wdt_ioctl,
- .open = s3c2410wdt_open,
- .release = s3c2410wdt_release,
+static struct watchdog_ops s3c2410wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = s3c2410wdt_start,
+ .stop = s3c2410wdt_stop,
+ .ping = s3c2410wdt_keepalive,
+ .set_timeout = s3c2410wdt_set_heartbeat,
};
-static struct miscdevice s3c2410wdt_miscdev = {
- .minor = WATCHDOG_MINOR,
- .name = "watchdog",
- .fops = &s3c2410wdt_fops,
+static struct watchdog_device s3c2410_wdd = {
+ .info = &s3c2410_wdt_ident,
+ .ops = &s3c2410wdt_ops,
};
/* interrupt handler code */
{
dev_info(wdt_dev, "watchdog timer expired (irq)\n");
- s3c2410wdt_keepalive();
+ s3c2410wdt_keepalive(&s3c2410_wdd);
return IRQ_HANDLED;
}
* the watchdog is running.
*/
- s3c2410wdt_keepalive();
+ s3c2410wdt_keepalive(&s3c2410_wdd);
} else if (val == CPUFREQ_POSTCHANGE) {
- s3c2410wdt_stop();
+ s3c2410wdt_stop(&s3c2410_wdd);
- ret = s3c2410wdt_set_heartbeat(tmr_margin);
+ ret = s3c2410wdt_set_heartbeat(&s3c2410_wdd, s3c2410_wdd.timeout);
if (ret >= 0)
- s3c2410wdt_start();
+ s3c2410wdt_start(&s3c2410_wdd);
else
goto err;
}
return 0;
err:
- dev_err(wdt_dev, "cannot set new value for timeout %d\n", tmr_margin);
+ dev_err(wdt_dev, "cannot set new value for timeout %d\n",
+ s3c2410_wdd.timeout);
return ret;
}
}
#endif
-
-
-/* device interface */
-
static int __devinit s3c2410wdt_probe(struct platform_device *pdev)
{
struct device *dev;
/* see if we can actually set the requested timer margin, and if
* not, try the default value */
- if (s3c2410wdt_set_heartbeat(tmr_margin)) {
- started = s3c2410wdt_set_heartbeat(
+ if (s3c2410wdt_set_heartbeat(&s3c2410_wdd, tmr_margin)) {
+ started = s3c2410wdt_set_heartbeat(&s3c2410_wdd,
CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);
if (started == 0)
"cannot start\n");
}
- ret = misc_register(&s3c2410wdt_miscdev);
+ ret = watchdog_register_device(&s3c2410_wdd);
if (ret) {
- dev_err(dev, "cannot register miscdev on minor=%d (%d)\n",
- WATCHDOG_MINOR, ret);
+ dev_err(dev, "cannot register watchdog (%d)\n", ret);
goto err_cpufreq;
}
if (tmr_atboot && started == 0) {
dev_info(dev, "starting watchdog timer\n");
- s3c2410wdt_start();
+ s3c2410wdt_start(&s3c2410_wdd);
} else if (!tmr_atboot) {
/* if we're not enabling the watchdog, then ensure it is
* disabled if it has been left running from the bootloader
* or other source */
- s3c2410wdt_stop();
+ s3c2410wdt_stop(&s3c2410_wdd);
}
/* print out a statement of readiness */
static int __devexit s3c2410wdt_remove(struct platform_device *dev)
{
- misc_deregister(&s3c2410wdt_miscdev);
+ watchdog_unregister_device(&s3c2410_wdd);
s3c2410wdt_cpufreq_deregister();
static void s3c2410wdt_shutdown(struct platform_device *dev)
{
- s3c2410wdt_stop();
+ s3c2410wdt_stop(&s3c2410_wdd);
}
#ifdef CONFIG_PM
wtdat_save = readl(wdt_base + S3C2410_WTDAT);
/* Note that WTCNT doesn't need to be saved. */
- s3c2410wdt_stop();
+ s3c2410wdt_stop(&s3c2410_wdd);
return 0;
}
* get the resources
*/
- ret = request_irq(1, sbwdog_interrupt, IRQF_DISABLED | IRQF_SHARED,
+ ret = request_irq(1, sbwdog_interrupt, IRQF_SHARED,
ident.identity, (void *)user_dog);
if (ret) {
printk(KERN_ERR "%s: failed to request irq 1 - %d\n",
{
int ret;
- ret = request_irq(1, sbwdog_interrupt, IRQF_DISABLED | IRQF_SHARED,
+ ret = request_irq(1, sbwdog_interrupt, IRQF_SHARED,
"Kernel Watchdog", IOADDR(A_SCD_WDOG_CFG_0));
if (ret) {
printk(KERN_CRIT
WATCHDOG_TIMEOUT);
}
- wdtmrctl = ioremap((unsigned long)(MMCR_BASE + OFFS_WDTMRCTL), 2);
+ wdtmrctl = ioremap(MMCR_BASE + OFFS_WDTMRCTL, 2);
if (!wdtmrctl) {
printk(KERN_ERR PFX "Unable to remap memory\n");
rc = -ENOMEM;
#include <linux/platform_device.h>
#include <linux/spinlock.h>
#include <linux/uaccess.h>
+#include <linux/module.h>
#include <mach/platform.h>
#include <mach/regs-rtc.h>
w83627hf_unselect_wd_register();
}
-static void wdt_ctrl(int timeout)
+static void wdt_set_time(int timeout)
{
spin_lock(&io_lock);
static int wdt_ping(void)
{
- wdt_ctrl(timeout);
+ wdt_set_time(timeout);
return 0;
}
static int wdt_disable(void)
{
- wdt_ctrl(0);
+ wdt_set_time(0);
return 0;
}
return 0;
}
+static int wdt_get_time(void)
+{
+ int timeleft;
+
+ spin_lock(&io_lock);
+
+ w83627hf_select_wd_register();
+
+ outb_p(0xF6, WDT_EFER); /* Select CRF6 */
+ timeleft = inb_p(WDT_EFDR); /* Read Timeout counter to CRF6 */
+
+ w83627hf_unselect_wd_register();
+
+ spin_unlock(&io_lock);
+
+ return timeleft;
+}
+
static ssize_t wdt_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
{
void __user *argp = (void __user *)arg;
int __user *p = argp;
- int new_timeout;
+ int timeval;
static const struct watchdog_info ident = {
.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
WDIOF_MAGICCLOSE,
wdt_ping();
break;
case WDIOC_SETTIMEOUT:
- if (get_user(new_timeout, p))
+ if (get_user(timeval, p))
return -EFAULT;
- if (wdt_set_heartbeat(new_timeout))
+ if (wdt_set_heartbeat(timeval))
return -EINVAL;
wdt_ping();
/* Fall */
case WDIOC_GETTIMEOUT:
return put_user(timeout, p);
+ case WDIOC_GETTIMELEFT:
+ timeval = wdt_get_time();
+ return put_user(timeval, p);
default:
return -ENOTTY;
}
goto out;
}
- ret = request_irq(irq, wdt_interrupt, IRQF_DISABLED, "wdt501p", NULL);
+ ret = request_irq(irq, wdt_interrupt, 0, "wdt501p", NULL);
if (ret) {
printk(KERN_ERR "wdt: IRQ %d is not free.\n", irq);
goto outreg;
irq = dev->irq;
io = pci_resource_start(dev, 2);
- if (request_irq(irq, wdtpci_interrupt, IRQF_DISABLED | IRQF_SHARED,
+ if (request_irq(irq, wdtpci_interrupt, IRQF_SHARED,
"wdt_pci", &wdtpci_miscdev)) {
printk(KERN_ERR PFX "IRQ %d is not free\n", irq);
goto out_reg;
#include <linux/moduleparam.h>
#include <linux/types.h>
#include <linux/kernel.h>
-#include <linux/fs.h>
-#include <linux/miscdevice.h>
+#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/watchdog.h>
#include <linux/uaccess.h>
"Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-static unsigned long wm831x_wdt_users;
-static struct miscdevice wm831x_wdt_miscdev;
-static int wm831x_wdt_expect_close;
-static DEFINE_MUTEX(wdt_mutex);
-static struct wm831x *wm831x;
-static unsigned int update_gpio;
-static unsigned int update_state;
+struct wm831x_wdt_drvdata {
+ struct watchdog_device wdt;
+ struct wm831x *wm831x;
+ struct mutex lock;
+ int update_gpio;
+ int update_state;
+};
/* We can't use the sub-second values here but they're included
* for completeness. */
static struct {
- int time; /* Seconds */
- u16 val; /* WDOG_TO value */
+ unsigned int time; /* Seconds */
+ u16 val; /* WDOG_TO value */
} wm831x_wdt_cfgs[] = {
{ 1, 2 },
{ 2, 3 },
{ 33, 7 }, /* Actually 32.768s so include both, others round down */
};
-static int wm831x_wdt_set_timeout(struct wm831x *wm831x, u16 value)
-{
- int ret;
-
- mutex_lock(&wdt_mutex);
-
- ret = wm831x_reg_unlock(wm831x);
- if (ret == 0) {
- ret = wm831x_set_bits(wm831x, WM831X_WATCHDOG,
- WM831X_WDOG_TO_MASK, value);
- wm831x_reg_lock(wm831x);
- } else {
- dev_err(wm831x->dev, "Failed to unlock security key: %d\n",
- ret);
- }
-
- mutex_unlock(&wdt_mutex);
-
- return ret;
-}
-
-static int wm831x_wdt_start(struct wm831x *wm831x)
+static int wm831x_wdt_start(struct watchdog_device *wdt_dev)
{
+ struct wm831x_wdt_drvdata *driver_data = watchdog_get_drvdata(wdt_dev);
+ struct wm831x *wm831x = driver_data->wm831x;
int ret;
- mutex_lock(&wdt_mutex);
+ mutex_lock(&driver_data->lock);
ret = wm831x_reg_unlock(wm831x);
if (ret == 0) {
ret);
}
- mutex_unlock(&wdt_mutex);
+ mutex_unlock(&driver_data->lock);
return ret;
}
-static int wm831x_wdt_stop(struct wm831x *wm831x)
+static int wm831x_wdt_stop(struct watchdog_device *wdt_dev)
{
+ struct wm831x_wdt_drvdata *driver_data = watchdog_get_drvdata(wdt_dev);
+ struct wm831x *wm831x = driver_data->wm831x;
int ret;
- mutex_lock(&wdt_mutex);
+ mutex_lock(&driver_data->lock);
ret = wm831x_reg_unlock(wm831x);
if (ret == 0) {
ret);
}
- mutex_unlock(&wdt_mutex);
+ mutex_unlock(&driver_data->lock);
return ret;
}
-static int wm831x_wdt_kick(struct wm831x *wm831x)
+static int wm831x_wdt_ping(struct watchdog_device *wdt_dev)
{
+ struct wm831x_wdt_drvdata *driver_data = watchdog_get_drvdata(wdt_dev);
+ struct wm831x *wm831x = driver_data->wm831x;
int ret;
u16 reg;
- mutex_lock(&wdt_mutex);
+ mutex_lock(&driver_data->lock);
- if (update_gpio) {
- gpio_set_value_cansleep(update_gpio, update_state);
- update_state = !update_state;
+ if (driver_data->update_gpio) {
+ gpio_set_value_cansleep(driver_data->update_gpio,
+ driver_data->update_state);
+ driver_data->update_state = !driver_data->update_state;
ret = 0;
goto out;
}
-
reg = wm831x_reg_read(wm831x, WM831X_WATCHDOG);
if (!(reg & WM831X_WDOG_RST_SRC)) {
}
out:
- mutex_unlock(&wdt_mutex);
+ mutex_unlock(&driver_data->lock);
return ret;
}
-static int wm831x_wdt_open(struct inode *inode, struct file *file)
+static int wm831x_wdt_set_timeout(struct watchdog_device *wdt_dev,
+ unsigned int timeout)
{
- int ret;
-
- if (!wm831x)
- return -ENODEV;
-
- if (test_and_set_bit(0, &wm831x_wdt_users))
- return -EBUSY;
+ struct wm831x_wdt_drvdata *driver_data = watchdog_get_drvdata(wdt_dev);
+ struct wm831x *wm831x = driver_data->wm831x;
+ int ret, i;
- ret = wm831x_wdt_start(wm831x);
- if (ret != 0)
- return ret;
-
- return nonseekable_open(inode, file);
-}
+ for (i = 0; i < ARRAY_SIZE(wm831x_wdt_cfgs); i++)
+ if (wm831x_wdt_cfgs[i].time == timeout)
+ break;
+ if (i == ARRAY_SIZE(wm831x_wdt_cfgs))
+ ret = -EINVAL;
-static int wm831x_wdt_release(struct inode *inode, struct file *file)
-{
- if (wm831x_wdt_expect_close)
- wm831x_wdt_stop(wm831x);
- else {
- dev_warn(wm831x->dev, "Watchdog device closed uncleanly\n");
- wm831x_wdt_kick(wm831x);
+ ret = wm831x_reg_unlock(wm831x);
+ if (ret == 0) {
+ ret = wm831x_set_bits(wm831x, WM831X_WATCHDOG,
+ WM831X_WDOG_TO_MASK,
+ wm831x_wdt_cfgs[i].val);
+ wm831x_reg_lock(wm831x);
+ } else {
+ dev_err(wm831x->dev, "Failed to unlock security key: %d\n",
+ ret);
}
- clear_bit(0, &wm831x_wdt_users);
-
- return 0;
-}
-
-static ssize_t wm831x_wdt_write(struct file *file,
- const char __user *data, size_t count,
- loff_t *ppos)
-{
- size_t i;
-
- if (count) {
- wm831x_wdt_kick(wm831x);
-
- if (!nowayout) {
- /* In case it was set long ago */
- wm831x_wdt_expect_close = 0;
-
- /* scan to see whether or not we got the magic
- character */
- for (i = 0; i != count; i++) {
- char c;
- if (get_user(c, data + i))
- return -EFAULT;
- if (c == 'V')
- wm831x_wdt_expect_close = 42;
- }
- }
- }
- return count;
+ return ret;
}
-static const struct watchdog_info ident = {
+static const struct watchdog_info wm831x_wdt_info = {
.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
.identity = "WM831x Watchdog",
};
-static long wm831x_wdt_ioctl(struct file *file, unsigned int cmd,
- unsigned long arg)
-{
- int ret = -ENOTTY, time, i;
- void __user *argp = (void __user *)arg;
- int __user *p = argp;
- u16 reg;
-
- switch (cmd) {
- case WDIOC_GETSUPPORT:
- ret = copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
- break;
-
- case WDIOC_GETSTATUS:
- case WDIOC_GETBOOTSTATUS:
- ret = put_user(0, p);
- break;
-
- case WDIOC_SETOPTIONS:
- {
- int options;
-
- if (get_user(options, p))
- return -EFAULT;
-
- ret = -EINVAL;
-
- /* Setting both simultaneously means at least one must fail */
- if (options == WDIOS_DISABLECARD)
- ret = wm831x_wdt_start(wm831x);
-
- if (options == WDIOS_ENABLECARD)
- ret = wm831x_wdt_stop(wm831x);
- break;
- }
-
- case WDIOC_KEEPALIVE:
- ret = wm831x_wdt_kick(wm831x);
- break;
-
- case WDIOC_SETTIMEOUT:
- ret = get_user(time, p);
- if (ret)
- break;
-
- if (time == 0) {
- if (nowayout)
- ret = -EINVAL;
- else
- wm831x_wdt_stop(wm831x);
- break;
- }
-
- for (i = 0; i < ARRAY_SIZE(wm831x_wdt_cfgs); i++)
- if (wm831x_wdt_cfgs[i].time == time)
- break;
- if (i == ARRAY_SIZE(wm831x_wdt_cfgs))
- ret = -EINVAL;
- else
- ret = wm831x_wdt_set_timeout(wm831x,
- wm831x_wdt_cfgs[i].val);
- break;
-
- case WDIOC_GETTIMEOUT:
- reg = wm831x_reg_read(wm831x, WM831X_WATCHDOG);
- reg &= WM831X_WDOG_TO_MASK;
- for (i = 0; i < ARRAY_SIZE(wm831x_wdt_cfgs); i++)
- if (wm831x_wdt_cfgs[i].val == reg)
- break;
- if (i == ARRAY_SIZE(wm831x_wdt_cfgs)) {
- dev_warn(wm831x->dev,
- "Unknown watchdog configuration: %x\n", reg);
- ret = -EINVAL;
- } else
- ret = put_user(wm831x_wdt_cfgs[i].time, p);
-
- }
-
- return ret;
-}
-
-static const struct file_operations wm831x_wdt_fops = {
+static const struct watchdog_ops wm831x_wdt_ops = {
.owner = THIS_MODULE,
- .llseek = no_llseek,
- .write = wm831x_wdt_write,
- .unlocked_ioctl = wm831x_wdt_ioctl,
- .open = wm831x_wdt_open,
- .release = wm831x_wdt_release,
-};
-
-static struct miscdevice wm831x_wdt_miscdev = {
- .minor = WATCHDOG_MINOR,
- .name = "watchdog",
- .fops = &wm831x_wdt_fops,
+ .start = wm831x_wdt_start,
+ .stop = wm831x_wdt_stop,
+ .ping = wm831x_wdt_ping,
+ .set_timeout = wm831x_wdt_set_timeout,
};
static int __devinit wm831x_wdt_probe(struct platform_device *pdev)
{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
struct wm831x_pdata *chip_pdata;
struct wm831x_watchdog_pdata *pdata;
- int reg, ret;
-
- if (wm831x) {
- dev_err(&pdev->dev, "wm831x watchdog already registered\n");
- return -EBUSY;
- }
-
- wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_wdt_drvdata *driver_data;
+ struct watchdog_device *wm831x_wdt;
+ int reg, ret, i;
ret = wm831x_reg_read(wm831x, WM831X_WATCHDOG);
if (ret < 0) {
if (reg & WM831X_WDOG_DEBUG)
dev_warn(wm831x->dev, "Watchdog is paused\n");
+ driver_data = kzalloc(sizeof(*driver_data), GFP_KERNEL);
+ if (!driver_data) {
+ dev_err(wm831x->dev, "Unable to alloacate watchdog device\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ mutex_init(&driver_data->lock);
+ driver_data->wm831x = wm831x;
+
+ wm831x_wdt = &driver_data->wdt;
+
+ wm831x_wdt->info = &wm831x_wdt_info;
+ wm831x_wdt->ops = &wm831x_wdt_ops;
+ watchdog_set_drvdata(wm831x_wdt, driver_data);
+
+ if (nowayout)
+ wm831x_wdt->status |= WDOG_NO_WAY_OUT;
+
+ reg = wm831x_reg_read(wm831x, WM831X_WATCHDOG);
+ reg &= WM831X_WDOG_TO_MASK;
+ for (i = 0; i < ARRAY_SIZE(wm831x_wdt_cfgs); i++)
+ if (wm831x_wdt_cfgs[i].val == reg)
+ break;
+ if (i == ARRAY_SIZE(wm831x_wdt_cfgs))
+ dev_warn(wm831x->dev,
+ "Unknown watchdog timeout: %x\n", reg);
+ else
+ wm831x_wdt->timeout = wm831x_wdt_cfgs[i].time;
+
/* Apply any configuration */
if (pdev->dev.parent->platform_data) {
chip_pdata = pdev->dev.parent->platform_data;
dev_err(wm831x->dev,
"Failed to request update GPIO: %d\n",
ret);
- goto err;
+ goto err_alloc;
}
ret = gpio_direction_output(pdata->update_gpio, 0);
goto err_gpio;
}
- update_gpio = pdata->update_gpio;
+ driver_data->update_gpio = pdata->update_gpio;
/* Make sure the watchdog takes hardware updates */
reg |= WM831X_WDOG_RST_SRC;
}
}
- wm831x_wdt_miscdev.parent = &pdev->dev;
-
- ret = misc_register(&wm831x_wdt_miscdev);
+ ret = watchdog_register_device(&driver_data->wdt);
if (ret != 0) {
- dev_err(wm831x->dev, "Failed to register miscdev: %d\n", ret);
+ dev_err(wm831x->dev, "watchdog_register_device() failed: %d\n",
+ ret);
goto err_gpio;
}
+ dev_set_drvdata(&pdev->dev, driver_data);
+
return 0;
err_gpio:
- if (update_gpio) {
- gpio_free(update_gpio);
- update_gpio = 0;
- }
+ if (driver_data->update_gpio)
+ gpio_free(driver_data->update_gpio);
+err_alloc:
+ kfree(driver_data);
err:
return ret;
}
static int __devexit wm831x_wdt_remove(struct platform_device *pdev)
{
- if (update_gpio) {
- gpio_free(update_gpio);
- update_gpio = 0;
- }
+ struct wm831x_wdt_drvdata *driver_data = dev_get_drvdata(&pdev->dev);
+
+ watchdog_unregister_device(&driver_data->wdt);
- misc_deregister(&wm831x_wdt_miscdev);
+ if (driver_data->update_gpio)
+ gpio_free(driver_data->update_gpio);
return 0;
}
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/errno.h>
+#include <linux/module.h>
#include <linux/mm.h>
#include <linux/bootmem.h>
#include <linux/pagemap.h>
#define inc_totalhigh_pages() (totalhigh_pages++)
#define dec_totalhigh_pages() (totalhigh_pages--)
#else
-#define inc_totalhigh_pages() do {} while(0)
-#define dec_totalhigh_pages() do {} while(0)
+#define inc_totalhigh_pages() do {} while (0)
+#define dec_totalhigh_pages() do {} while (0)
#endif
/* List of ballooned pages, threaded through the mem_map array. */
if (PageHighMem(page)) {
balloon_stats.balloon_high--;
inc_totalhigh_pages();
- }
- else
+ } else
balloon_stats.balloon_low--;
totalram_pages++;
(unsigned long)__va(pfn << PAGE_SHIFT),
__pte_ma(0), 0);
BUG_ON(ret);
- }
+ }
}
* alloc_xenballooned_pages - get pages that have been ballooned out
* @nr_pages: Number of pages to get
* @pages: pages returned
- * @highmem: highmem or lowmem pages
+ * @highmem: allow highmem pages
* @return 0 on success, error otherwise
*/
int alloc_xenballooned_pages(int nr_pages, struct page **pages, bool highmem)
{
int pgno = 0;
- struct page* page;
+ struct page *page;
mutex_lock(&balloon_mutex);
while (pgno < nr_pages) {
page = balloon_retrieve(highmem);
- if (page && PageHighMem(page) == highmem) {
+ if (page && (highmem || !PageHighMem(page))) {
pages[pgno++] = page;
} else {
enum bp_state st;
* @nr_pages: Number of pages
* @pages: pages to return
*/
-void free_xenballooned_pages(int nr_pages, struct page** pages)
+void free_xenballooned_pages(int nr_pages, struct page **pages)
{
int i;
* IPI - IPI vector
* EVTCHN -
*/
-struct irq_info
-{
+struct irq_info {
struct list_head list;
enum xen_irq_type type; /* type */
unsigned irq;
struct shared_info *sh,
unsigned int idx)
{
- return (sh->evtchn_pending[idx] &
+ return sh->evtchn_pending[idx] &
per_cpu(cpu_evtchn_mask, cpu)[idx] &
- ~sh->evtchn_mask[idx]);
+ ~sh->evtchn_mask[idx];
}
static void bind_evtchn_to_cpu(unsigned int chn, unsigned int cpu)
int cpu = get_cpu();
struct shared_info *s = HYPERVISOR_shared_info;
struct vcpu_info *vcpu_info = __this_cpu_read(xen_vcpu);
- unsigned count;
+ unsigned count;
do {
unsigned long pending_words;
/* Grant foreign access to the page. */
gref->gref_id = gnttab_grant_foreign_access(op->domid,
pfn_to_mfn(page_to_pfn(gref->page)), readonly);
- if (gref->gref_id < 0) {
+ if ((int)gref->gref_id < 0) {
rc = gref->gref_id;
goto undo;
}
goto out;
}
- gref_ids = kzalloc(sizeof(gref_ids[0]) * op.count, GFP_TEMPORARY);
+ gref_ids = kcalloc(op.count, sizeof(gref_ids[0]), GFP_TEMPORARY);
if (!gref_ids) {
rc = -ENOMEM;
goto out;
if (NULL == add)
return NULL;
- add->grants = kzalloc(sizeof(add->grants[0]) * count, GFP_KERNEL);
- add->map_ops = kzalloc(sizeof(add->map_ops[0]) * count, GFP_KERNEL);
- add->unmap_ops = kzalloc(sizeof(add->unmap_ops[0]) * count, GFP_KERNEL);
- add->kmap_ops = kzalloc(sizeof(add->kmap_ops[0]) * count, GFP_KERNEL);
- add->pages = kzalloc(sizeof(add->pages[0]) * count, GFP_KERNEL);
+ add->grants = kcalloc(count, sizeof(add->grants[0]), GFP_KERNEL);
+ add->map_ops = kcalloc(count, sizeof(add->map_ops[0]), GFP_KERNEL);
+ add->unmap_ops = kcalloc(count, sizeof(add->unmap_ops[0]), GFP_KERNEL);
+ add->kmap_ops = kcalloc(count, sizeof(add->kmap_ops[0]), GFP_KERNEL);
+ add->pages = kcalloc(count, sizeof(add->pages[0]), GFP_KERNEL);
if (NULL == add->grants ||
NULL == add->map_ops ||
NULL == add->unmap_ops ||
atomic_sub(map->count, &pages_mapped);
- if (map->notify.flags & UNMAP_NOTIFY_SEND_EVENT) {
+ if (map->notify.flags & UNMAP_NOTIFY_SEND_EVENT)
notify_remote_via_evtchn(map->notify.event);
- }
if (map->pages) {
if (!use_ptemod)
nflags = shared[ref].flags;
- return (nflags & (GTF_reading|GTF_writing));
+ return nflags & (GTF_reading|GTF_writing);
}
EXPORT_SYMBOL_GPL(gnttab_query_foreign_access);
#include <linux/stop_machine.h>
#include <linux/freezer.h>
#include <linux/syscore_ops.h>
+#include <linux/export.h>
#include <xen/xen.h>
#include <xen/xenbus.h>
&manage_pci_ext);
} else {
struct physdev_manage_pci manage_pci = {
- .bus = pci_dev->bus->number,
+ .bus = pci_dev->bus->number,
.devfn = pci_dev->devfn,
};
#include <linux/bootmem.h>
#include <linux/dma-mapping.h>
+#include <linux/export.h>
#include <xen/swiotlb-xen.h>
#include <xen/page.h>
#include <xen/xen-ops.h>
static int register_balloon(struct sys_device *sysdev);
-static struct xenbus_watch target_watch =
-{
- .node = "memory/target"
-};
-
/* React to a change in the target key */
static void watch_target(struct xenbus_watch *watch,
const char **vec, unsigned int len)
*/
balloon_set_new_target(new_target >> (PAGE_SHIFT - 10));
}
+static struct xenbus_watch target_watch = {
+ .node = "memory/target",
+ .callback = watch_target,
+};
+
static int balloon_init_watcher(struct notifier_block *notifier,
unsigned long event,
return NOTIFY_DONE;
}
-static struct notifier_block xenstore_notifier;
+static struct notifier_block xenstore_notifier = {
+ .notifier_call = balloon_init_watcher,
+};
static int __init balloon_init(void)
{
register_xen_selfballooning(&balloon_sysdev);
- target_watch.callback = watch_target;
- xenstore_notifier.notifier_call = balloon_init_watcher;
-
register_xenstore_notifier(&xenstore_notifier);
return 0;
*/
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/pci.h>
#include "pciback.h"
#include "conf_space.h"
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/vmalloc.h>
+#include <linux/export.h>
#include <asm/xen/hypervisor.h>
+#include <asm/xen/page.h>
#include <xen/interface/xen.h>
#include <xen/interface/event_channel.h>
#include <xen/events.h>
int xenbus_map_ring_valloc(struct xenbus_device *dev, int gnt_ref, void **vaddr)
{
struct gnttab_map_grant_ref op = {
- .flags = GNTMAP_host_map,
+ .flags = GNTMAP_host_map | GNTMAP_contains_pte,
.ref = gnt_ref,
.dom = dev->otherend_id,
};
struct vm_struct *area;
+ pte_t *pte;
*vaddr = NULL;
- area = xen_alloc_vm_area(PAGE_SIZE);
+ area = alloc_vm_area(PAGE_SIZE, &pte);
if (!area)
return -ENOMEM;
- op.host_addr = (unsigned long)area->addr;
+ op.host_addr = arbitrary_virt_to_machine(pte).maddr;
if (HYPERVISOR_grant_table_op(GNTTABOP_map_grant_ref, &op, 1))
BUG();
if (op.status != GNTST_okay) {
- xen_free_vm_area(area);
+ free_vm_area(area);
xenbus_dev_fatal(dev, op.status,
"mapping in shared page %d from domain %d",
gnt_ref, dev->otherend_id);
struct gnttab_unmap_grant_ref op = {
.host_addr = (unsigned long)vaddr,
};
+ unsigned int level;
/* It'd be nice if linux/vmalloc.h provided a find_vm_area(void *addr)
* method so that we don't have to muck with vmalloc internals here.
}
op.handle = (grant_handle_t)area->phys_addr;
+ op.host_addr = arbitrary_virt_to_machine(
+ lookup_address((unsigned long)vaddr, &level)).maddr;
if (HYPERVISOR_grant_table_op(GNTTABOP_unmap_grant_ref, &op, 1))
BUG();
if (op.status == GNTST_okay)
- xen_free_vm_area(area);
+ free_vm_area(area);
else
xenbus_dev_error(dev, op.status,
"unmapping page at handle %d error %d",
#include <linux/mutex.h>
#include <linux/io.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <asm/page.h>
#include <asm/pgtable.h>
}
EXPORT_SYMBOL_GPL(xenbus_unregister_driver);
-struct xb_find_info
-{
+struct xb_find_info {
struct xenbus_device *dev;
const char *nodename;
};
EXPORT_SYMBOL_GPL(xenbus_dev_cancel);
/* A flag to determine if xenstored is 'ready' (i.e. has started) */
-int xenstored_ready = 0;
+int xenstored_ready;
int register_xenstore_notifier(struct notifier_block *nb)
proc_mkdir("xen", NULL);
#endif
- out_error:
+out_error:
return err;
}
#define XEN_BUS_ID_SIZE 20
-struct xen_bus_type
-{
+struct xen_bus_type {
char *root;
unsigned int levels;
int (*get_bus_id)(char bus_id[XEN_BUS_ID_SIZE], const char *nodename);
#include <linux/fcntl.h>
#include <linux/mm.h>
#include <linux/notifier.h>
+#include <linux/export.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <linux/kthread.h>
#include <linux/mutex.h>
#include <linux/io.h>
+#include <linux/module.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/init.h>
+#include <linux/export.h>
#include <asm/uaccess.h>
#include <asm/amigahw.h>
#include <asm/setup.h>
#include <linux/blkdev.h>
#include <linux/mempool.h>
+#include <linux/export.h>
#include <linux/bio.h>
#include <linux/workqueue.h>
#include <linux/slab.h>
* RETURNS:
* Pointer to new bio on success, NULL on failure.
*/
-struct bio *bio_alloc(gfp_t gfp_mask, int nr_iovecs)
+struct bio *bio_alloc(gfp_t gfp_mask, unsigned int nr_iovecs)
{
struct bio *bio = bio_alloc_bioset(gfp_mask, nr_iovecs, fs_bio_set);
* %__GFP_WAIT, the allocation is guaranteed to succeed.
*
**/
-struct bio *bio_kmalloc(gfp_t gfp_mask, int nr_iovecs)
+struct bio *bio_kmalloc(gfp_t gfp_mask, unsigned int nr_iovecs)
{
struct bio *bio;
kfree(bmd);
}
-static struct bio_map_data *bio_alloc_map_data(int nr_segs, int iov_count,
+static struct bio_map_data *bio_alloc_map_data(int nr_segs,
+ unsigned int iov_count,
gfp_t gfp_mask)
{
struct bio_map_data *bmd;
extent_map.o sysfs.o struct-funcs.o xattr.o ordered-data.o \
extent_io.o volumes.o async-thread.o ioctl.o locking.o orphan.o \
export.o tree-log.o free-space-cache.o zlib.o lzo.o \
- compression.o delayed-ref.o relocation.o delayed-inode.o scrub.o
+ compression.o delayed-ref.o relocation.o delayed-inode.o scrub.o \
+ reada.o backref.o
btrfs-$(CONFIG_BTRFS_FS_POSIX_ACL) += acl.o
if (!value)
return ERR_PTR(-ENOMEM);
size = __btrfs_getxattr(inode, name, value, size);
- if (size > 0) {
- acl = posix_acl_from_xattr(value, size);
- if (IS_ERR(acl)) {
- kfree(value);
- return acl;
- }
- set_cached_acl(inode, type, acl);
- }
- kfree(value);
+ }
+ if (size > 0) {
+ acl = posix_acl_from_xattr(value, size);
} else if (size == -ENOENT || size == -ENODATA || size == 0) {
/* FIXME, who returns -ENOENT? I think nobody */
acl = NULL;
- set_cached_acl(inode, type, acl);
} else {
acl = ERR_PTR(-EIO);
}
+ kfree(value);
+
+ if (!IS_ERR(acl))
+ set_cached_acl(inode, type, acl);
return acl;
}
--- /dev/null
+/*
+ * Copyright (C) 2011 STRATO. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License v2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write to the
+ * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 021110-1307, USA.
+ */
+
+#include "ctree.h"
+#include "disk-io.h"
+#include "backref.h"
+
+struct __data_ref {
+ struct list_head list;
+ u64 inum;
+ u64 root;
+ u64 extent_data_item_offset;
+};
+
+struct __shared_ref {
+ struct list_head list;
+ u64 disk_byte;
+};
+
+static int __inode_info(u64 inum, u64 ioff, u8 key_type,
+ struct btrfs_root *fs_root, struct btrfs_path *path,
+ struct btrfs_key *found_key)
+{
+ int ret;
+ struct btrfs_key key;
+ struct extent_buffer *eb;
+
+ key.type = key_type;
+ key.objectid = inum;
+ key.offset = ioff;
+
+ ret = btrfs_search_slot(NULL, fs_root, &key, path, 0, 0);
+ if (ret < 0)
+ return ret;
+
+ eb = path->nodes[0];
+ if (ret && path->slots[0] >= btrfs_header_nritems(eb)) {
+ ret = btrfs_next_leaf(fs_root, path);
+ if (ret)
+ return ret;
+ eb = path->nodes[0];
+ }
+
+ btrfs_item_key_to_cpu(eb, found_key, path->slots[0]);
+ if (found_key->type != key.type || found_key->objectid != key.objectid)
+ return 1;
+
+ return 0;
+}
+
+/*
+ * this makes the path point to (inum INODE_ITEM ioff)
+ */
+int inode_item_info(u64 inum, u64 ioff, struct btrfs_root *fs_root,
+ struct btrfs_path *path)
+{
+ struct btrfs_key key;
+ return __inode_info(inum, ioff, BTRFS_INODE_ITEM_KEY, fs_root, path,
+ &key);
+}
+
+static int inode_ref_info(u64 inum, u64 ioff, struct btrfs_root *fs_root,
+ struct btrfs_path *path,
+ struct btrfs_key *found_key)
+{
+ return __inode_info(inum, ioff, BTRFS_INODE_REF_KEY, fs_root, path,
+ found_key);
+}
+
+/*
+ * this iterates to turn a btrfs_inode_ref into a full filesystem path. elements
+ * of the path are separated by '/' and the path is guaranteed to be
+ * 0-terminated. the path is only given within the current file system.
+ * Therefore, it never starts with a '/'. the caller is responsible to provide
+ * "size" bytes in "dest". the dest buffer will be filled backwards. finally,
+ * the start point of the resulting string is returned. this pointer is within
+ * dest, normally.
+ * in case the path buffer would overflow, the pointer is decremented further
+ * as if output was written to the buffer, though no more output is actually
+ * generated. that way, the caller can determine how much space would be
+ * required for the path to fit into the buffer. in that case, the returned
+ * value will be smaller than dest. callers must check this!
+ */
+static char *iref_to_path(struct btrfs_root *fs_root, struct btrfs_path *path,
+ struct btrfs_inode_ref *iref,
+ struct extent_buffer *eb_in, u64 parent,
+ char *dest, u32 size)
+{
+ u32 len;
+ int slot;
+ u64 next_inum;
+ int ret;
+ s64 bytes_left = size - 1;
+ struct extent_buffer *eb = eb_in;
+ struct btrfs_key found_key;
+
+ if (bytes_left >= 0)
+ dest[bytes_left] = '\0';
+
+ while (1) {
+ len = btrfs_inode_ref_name_len(eb, iref);
+ bytes_left -= len;
+ if (bytes_left >= 0)
+ read_extent_buffer(eb, dest + bytes_left,
+ (unsigned long)(iref + 1), len);
+ if (eb != eb_in)
+ free_extent_buffer(eb);
+ ret = inode_ref_info(parent, 0, fs_root, path, &found_key);
+ if (ret)
+ break;
+ next_inum = found_key.offset;
+
+ /* regular exit ahead */
+ if (parent == next_inum)
+ break;
+
+ slot = path->slots[0];
+ eb = path->nodes[0];
+ /* make sure we can use eb after releasing the path */
+ if (eb != eb_in)
+ atomic_inc(&eb->refs);
+ btrfs_release_path(path);
+
+ iref = btrfs_item_ptr(eb, slot, struct btrfs_inode_ref);
+ parent = next_inum;
+ --bytes_left;
+ if (bytes_left >= 0)
+ dest[bytes_left] = '/';
+ }
+
+ btrfs_release_path(path);
+
+ if (ret)
+ return ERR_PTR(ret);
+
+ return dest + bytes_left;
+}
+
+/*
+ * this makes the path point to (logical EXTENT_ITEM *)
+ * returns BTRFS_EXTENT_FLAG_DATA for data, BTRFS_EXTENT_FLAG_TREE_BLOCK for
+ * tree blocks and <0 on error.
+ */
+int extent_from_logical(struct btrfs_fs_info *fs_info, u64 logical,
+ struct btrfs_path *path, struct btrfs_key *found_key)
+{
+ int ret;
+ u64 flags;
+ u32 item_size;
+ struct extent_buffer *eb;
+ struct btrfs_extent_item *ei;
+ struct btrfs_key key;
+
+ key.type = BTRFS_EXTENT_ITEM_KEY;
+ key.objectid = logical;
+ key.offset = (u64)-1;
+
+ ret = btrfs_search_slot(NULL, fs_info->extent_root, &key, path, 0, 0);
+ if (ret < 0)
+ return ret;
+ ret = btrfs_previous_item(fs_info->extent_root, path,
+ 0, BTRFS_EXTENT_ITEM_KEY);
+ if (ret < 0)
+ return ret;
+
+ btrfs_item_key_to_cpu(path->nodes[0], found_key, path->slots[0]);
+ if (found_key->type != BTRFS_EXTENT_ITEM_KEY ||
+ found_key->objectid > logical ||
+ found_key->objectid + found_key->offset <= logical)
+ return -ENOENT;
+
+ eb = path->nodes[0];
+ item_size = btrfs_item_size_nr(eb, path->slots[0]);
+ BUG_ON(item_size < sizeof(*ei));
+
+ ei = btrfs_item_ptr(eb, path->slots[0], struct btrfs_extent_item);
+ flags = btrfs_extent_flags(eb, ei);
+
+ if (flags & BTRFS_EXTENT_FLAG_TREE_BLOCK)
+ return BTRFS_EXTENT_FLAG_TREE_BLOCK;
+ if (flags & BTRFS_EXTENT_FLAG_DATA)
+ return BTRFS_EXTENT_FLAG_DATA;
+
+ return -EIO;
+}
+
+/*
+ * helper function to iterate extent inline refs. ptr must point to a 0 value
+ * for the first call and may be modified. it is used to track state.
+ * if more refs exist, 0 is returned and the next call to
+ * __get_extent_inline_ref must pass the modified ptr parameter to get the
+ * next ref. after the last ref was processed, 1 is returned.
+ * returns <0 on error
+ */
+static int __get_extent_inline_ref(unsigned long *ptr, struct extent_buffer *eb,
+ struct btrfs_extent_item *ei, u32 item_size,
+ struct btrfs_extent_inline_ref **out_eiref,
+ int *out_type)
+{
+ unsigned long end;
+ u64 flags;
+ struct btrfs_tree_block_info *info;
+
+ if (!*ptr) {
+ /* first call */
+ flags = btrfs_extent_flags(eb, ei);
+ if (flags & BTRFS_EXTENT_FLAG_TREE_BLOCK) {
+ info = (struct btrfs_tree_block_info *)(ei + 1);
+ *out_eiref =
+ (struct btrfs_extent_inline_ref *)(info + 1);
+ } else {
+ *out_eiref = (struct btrfs_extent_inline_ref *)(ei + 1);
+ }
+ *ptr = (unsigned long)*out_eiref;
+ if ((void *)*ptr >= (void *)ei + item_size)
+ return -ENOENT;
+ }
+
+ end = (unsigned long)ei + item_size;
+ *out_eiref = (struct btrfs_extent_inline_ref *)*ptr;
+ *out_type = btrfs_extent_inline_ref_type(eb, *out_eiref);
+
+ *ptr += btrfs_extent_inline_ref_size(*out_type);
+ WARN_ON(*ptr > end);
+ if (*ptr == end)
+ return 1; /* last */
+
+ return 0;
+}
+
+/*
+ * reads the tree block backref for an extent. tree level and root are returned
+ * through out_level and out_root. ptr must point to a 0 value for the first
+ * call and may be modified (see __get_extent_inline_ref comment).
+ * returns 0 if data was provided, 1 if there was no more data to provide or
+ * <0 on error.
+ */
+int tree_backref_for_extent(unsigned long *ptr, struct extent_buffer *eb,
+ struct btrfs_extent_item *ei, u32 item_size,
+ u64 *out_root, u8 *out_level)
+{
+ int ret;
+ int type;
+ struct btrfs_tree_block_info *info;
+ struct btrfs_extent_inline_ref *eiref;
+
+ if (*ptr == (unsigned long)-1)
+ return 1;
+
+ while (1) {
+ ret = __get_extent_inline_ref(ptr, eb, ei, item_size,
+ &eiref, &type);
+ if (ret < 0)
+ return ret;
+
+ if (type == BTRFS_TREE_BLOCK_REF_KEY ||
+ type == BTRFS_SHARED_BLOCK_REF_KEY)
+ break;
+
+ if (ret == 1)
+ return 1;
+ }
+
+ /* we can treat both ref types equally here */
+ info = (struct btrfs_tree_block_info *)(ei + 1);
+ *out_root = btrfs_extent_inline_ref_offset(eb, eiref);
+ *out_level = btrfs_tree_block_level(eb, info);
+
+ if (ret == 1)
+ *ptr = (unsigned long)-1;
+
+ return 0;
+}
+
+static int __data_list_add(struct list_head *head, u64 inum,
+ u64 extent_data_item_offset, u64 root)
+{
+ struct __data_ref *ref;
+
+ ref = kmalloc(sizeof(*ref), GFP_NOFS);
+ if (!ref)
+ return -ENOMEM;
+
+ ref->inum = inum;
+ ref->extent_data_item_offset = extent_data_item_offset;
+ ref->root = root;
+ list_add_tail(&ref->list, head);
+
+ return 0;
+}
+
+static int __data_list_add_eb(struct list_head *head, struct extent_buffer *eb,
+ struct btrfs_extent_data_ref *dref)
+{
+ return __data_list_add(head, btrfs_extent_data_ref_objectid(eb, dref),
+ btrfs_extent_data_ref_offset(eb, dref),
+ btrfs_extent_data_ref_root(eb, dref));
+}
+
+static int __shared_list_add(struct list_head *head, u64 disk_byte)
+{
+ struct __shared_ref *ref;
+
+ ref = kmalloc(sizeof(*ref), GFP_NOFS);
+ if (!ref)
+ return -ENOMEM;
+
+ ref->disk_byte = disk_byte;
+ list_add_tail(&ref->list, head);
+
+ return 0;
+}
+
+static int __iter_shared_inline_ref_inodes(struct btrfs_fs_info *fs_info,
+ u64 logical, u64 inum,
+ u64 extent_data_item_offset,
+ u64 extent_offset,
+ struct btrfs_path *path,
+ struct list_head *data_refs,
+ iterate_extent_inodes_t *iterate,
+ void *ctx)
+{
+ u64 ref_root;
+ u32 item_size;
+ struct btrfs_key key;
+ struct extent_buffer *eb;
+ struct btrfs_extent_item *ei;
+ struct btrfs_extent_inline_ref *eiref;
+ struct __data_ref *ref;
+ int ret;
+ int type;
+ int last;
+ unsigned long ptr = 0;
+
+ WARN_ON(!list_empty(data_refs));
+ ret = extent_from_logical(fs_info, logical, path, &key);
+ if (ret & BTRFS_EXTENT_FLAG_DATA)
+ ret = -EIO;
+ if (ret < 0)
+ goto out;
+
+ eb = path->nodes[0];
+ ei = btrfs_item_ptr(eb, path->slots[0], struct btrfs_extent_item);
+ item_size = btrfs_item_size_nr(eb, path->slots[0]);
+
+ ret = 0;
+ ref_root = 0;
+ /*
+ * as done in iterate_extent_inodes, we first build a list of refs to
+ * iterate, then free the path and then iterate them to avoid deadlocks.
+ */
+ do {
+ last = __get_extent_inline_ref(&ptr, eb, ei, item_size,
+ &eiref, &type);
+ if (last < 0) {
+ ret = last;
+ goto out;
+ }
+ if (type == BTRFS_TREE_BLOCK_REF_KEY ||
+ type == BTRFS_SHARED_BLOCK_REF_KEY) {
+ ref_root = btrfs_extent_inline_ref_offset(eb, eiref);
+ ret = __data_list_add(data_refs, inum,
+ extent_data_item_offset,
+ ref_root);
+ }
+ } while (!ret && !last);
+
+ btrfs_release_path(path);
+
+ if (ref_root == 0) {
+ printk(KERN_ERR "btrfs: failed to find tree block ref "
+ "for shared data backref %llu\n", logical);
+ WARN_ON(1);
+ ret = -EIO;
+ }
+
+out:
+ while (!list_empty(data_refs)) {
+ ref = list_first_entry(data_refs, struct __data_ref, list);
+ list_del(&ref->list);
+ if (!ret)
+ ret = iterate(ref->inum, extent_offset +
+ ref->extent_data_item_offset,
+ ref->root, ctx);
+ kfree(ref);
+ }
+
+ return ret;
+}
+
+static int __iter_shared_inline_ref(struct btrfs_fs_info *fs_info,
+ u64 logical, u64 orig_extent_item_objectid,
+ u64 extent_offset, struct btrfs_path *path,
+ struct list_head *data_refs,
+ iterate_extent_inodes_t *iterate,
+ void *ctx)
+{
+ u64 disk_byte;
+ struct btrfs_key key;
+ struct btrfs_file_extent_item *fi;
+ struct extent_buffer *eb;
+ int slot;
+ int nritems;
+ int ret;
+ int found = 0;
+
+ eb = read_tree_block(fs_info->tree_root, logical,
+ fs_info->tree_root->leafsize, 0);
+ if (!eb)
+ return -EIO;
+
+ /*
+ * from the shared data ref, we only have the leaf but we need
+ * the key. thus, we must look into all items and see that we
+ * find one (some) with a reference to our extent item.
+ */
+ nritems = btrfs_header_nritems(eb);
+ for (slot = 0; slot < nritems; ++slot) {
+ btrfs_item_key_to_cpu(eb, &key, slot);
+ if (key.type != BTRFS_EXTENT_DATA_KEY)
+ continue;
+ fi = btrfs_item_ptr(eb, slot, struct btrfs_file_extent_item);
+ if (!fi) {
+ free_extent_buffer(eb);
+ return -EIO;
+ }
+ disk_byte = btrfs_file_extent_disk_bytenr(eb, fi);
+ if (disk_byte != orig_extent_item_objectid) {
+ if (found)
+ break;
+ else
+ continue;
+ }
+ ++found;
+ ret = __iter_shared_inline_ref_inodes(fs_info, logical,
+ key.objectid,
+ key.offset,
+ extent_offset, path,
+ data_refs,
+ iterate, ctx);
+ if (ret)
+ break;
+ }
+
+ if (!found) {
+ printk(KERN_ERR "btrfs: failed to follow shared data backref "
+ "to parent %llu\n", logical);
+ WARN_ON(1);
+ ret = -EIO;
+ }
+
+ free_extent_buffer(eb);
+ return ret;
+}
+
+/*
+ * calls iterate() for every inode that references the extent identified by
+ * the given parameters. will use the path given as a parameter and return it
+ * released.
+ * when the iterator function returns a non-zero value, iteration stops.
+ */
+int iterate_extent_inodes(struct btrfs_fs_info *fs_info,
+ struct btrfs_path *path,
+ u64 extent_item_objectid,
+ u64 extent_offset,
+ iterate_extent_inodes_t *iterate, void *ctx)
+{
+ unsigned long ptr = 0;
+ int last;
+ int ret;
+ int type;
+ u64 logical;
+ u32 item_size;
+ struct btrfs_extent_inline_ref *eiref;
+ struct btrfs_extent_data_ref *dref;
+ struct extent_buffer *eb;
+ struct btrfs_extent_item *ei;
+ struct btrfs_key key;
+ struct list_head data_refs = LIST_HEAD_INIT(data_refs);
+ struct list_head shared_refs = LIST_HEAD_INIT(shared_refs);
+ struct __data_ref *ref_d;
+ struct __shared_ref *ref_s;
+
+ eb = path->nodes[0];
+ ei = btrfs_item_ptr(eb, path->slots[0], struct btrfs_extent_item);
+ item_size = btrfs_item_size_nr(eb, path->slots[0]);
+
+ /* first we iterate the inline refs, ... */
+ do {
+ last = __get_extent_inline_ref(&ptr, eb, ei, item_size,
+ &eiref, &type);
+ if (last == -ENOENT) {
+ ret = 0;
+ break;
+ }
+ if (last < 0) {
+ ret = last;
+ break;
+ }
+
+ if (type == BTRFS_EXTENT_DATA_REF_KEY) {
+ dref = (struct btrfs_extent_data_ref *)(&eiref->offset);
+ ret = __data_list_add_eb(&data_refs, eb, dref);
+ } else if (type == BTRFS_SHARED_DATA_REF_KEY) {
+ logical = btrfs_extent_inline_ref_offset(eb, eiref);
+ ret = __shared_list_add(&shared_refs, logical);
+ }
+ } while (!ret && !last);
+
+ /* ... then we proceed to in-tree references and ... */
+ while (!ret) {
+ ++path->slots[0];
+ if (path->slots[0] > btrfs_header_nritems(eb)) {
+ ret = btrfs_next_leaf(fs_info->extent_root, path);
+ if (ret) {
+ if (ret == 1)
+ ret = 0; /* we're done */
+ break;
+ }
+ eb = path->nodes[0];
+ }
+ btrfs_item_key_to_cpu(eb, &key, path->slots[0]);
+ if (key.objectid != extent_item_objectid)
+ break;
+ if (key.type == BTRFS_EXTENT_DATA_REF_KEY) {
+ dref = btrfs_item_ptr(eb, path->slots[0],
+ struct btrfs_extent_data_ref);
+ ret = __data_list_add_eb(&data_refs, eb, dref);
+ } else if (key.type == BTRFS_SHARED_DATA_REF_KEY) {
+ ret = __shared_list_add(&shared_refs, key.offset);
+ }
+ }
+
+ btrfs_release_path(path);
+
+ /*
+ * ... only at the very end we can process the refs we found. this is
+ * because the iterator function we call is allowed to make tree lookups
+ * and we have to avoid deadlocks. additionally, we need more tree
+ * lookups ourselves for shared data refs.
+ */
+ while (!list_empty(&data_refs)) {
+ ref_d = list_first_entry(&data_refs, struct __data_ref, list);
+ list_del(&ref_d->list);
+ if (!ret)
+ ret = iterate(ref_d->inum, extent_offset +
+ ref_d->extent_data_item_offset,
+ ref_d->root, ctx);
+ kfree(ref_d);
+ }
+
+ while (!list_empty(&shared_refs)) {
+ ref_s = list_first_entry(&shared_refs, struct __shared_ref,
+ list);
+ list_del(&ref_s->list);
+ if (!ret)
+ ret = __iter_shared_inline_ref(fs_info,
+ ref_s->disk_byte,
+ extent_item_objectid,
+ extent_offset, path,
+ &data_refs,
+ iterate, ctx);
+ kfree(ref_s);
+ }
+
+ return ret;
+}
+
+int iterate_inodes_from_logical(u64 logical, struct btrfs_fs_info *fs_info,
+ struct btrfs_path *path,
+ iterate_extent_inodes_t *iterate, void *ctx)
+{
+ int ret;
+ u64 offset;
+ struct btrfs_key found_key;
+
+ ret = extent_from_logical(fs_info, logical, path,
+ &found_key);
+ if (ret & BTRFS_EXTENT_FLAG_TREE_BLOCK)
+ ret = -EINVAL;
+ if (ret < 0)
+ return ret;
+
+ offset = logical - found_key.objectid;
+ ret = iterate_extent_inodes(fs_info, path, found_key.objectid,
+ offset, iterate, ctx);
+
+ return ret;
+}
+
+static int iterate_irefs(u64 inum, struct btrfs_root *fs_root,
+ struct btrfs_path *path,
+ iterate_irefs_t *iterate, void *ctx)
+{
+ int ret;
+ int slot;
+ u32 cur;
+ u32 len;
+ u32 name_len;
+ u64 parent = 0;
+ int found = 0;
+ struct extent_buffer *eb;
+ struct btrfs_item *item;
+ struct btrfs_inode_ref *iref;
+ struct btrfs_key found_key;
+
+ while (1) {
+ ret = inode_ref_info(inum, parent ? parent+1 : 0, fs_root, path,
+ &found_key);
+ if (ret < 0)
+ break;
+ if (ret) {
+ ret = found ? 0 : -ENOENT;
+ break;
+ }
+ ++found;
+
+ parent = found_key.offset;
+ slot = path->slots[0];
+ eb = path->nodes[0];
+ /* make sure we can use eb after releasing the path */
+ atomic_inc(&eb->refs);
+ btrfs_release_path(path);
+
+ item = btrfs_item_nr(eb, slot);
+ iref = btrfs_item_ptr(eb, slot, struct btrfs_inode_ref);
+
+ for (cur = 0; cur < btrfs_item_size(eb, item); cur += len) {
+ name_len = btrfs_inode_ref_name_len(eb, iref);
+ /* path must be released before calling iterate()! */
+ ret = iterate(parent, iref, eb, ctx);
+ if (ret) {
+ free_extent_buffer(eb);
+ break;
+ }
+ len = sizeof(*iref) + name_len;
+ iref = (struct btrfs_inode_ref *)((char *)iref + len);
+ }
+ free_extent_buffer(eb);
+ }
+
+ btrfs_release_path(path);
+
+ return ret;
+}
+
+/*
+ * returns 0 if the path could be dumped (probably truncated)
+ * returns <0 in case of an error
+ */
+static int inode_to_path(u64 inum, struct btrfs_inode_ref *iref,
+ struct extent_buffer *eb, void *ctx)
+{
+ struct inode_fs_paths *ipath = ctx;
+ char *fspath;
+ char *fspath_min;
+ int i = ipath->fspath->elem_cnt;
+ const int s_ptr = sizeof(char *);
+ u32 bytes_left;
+
+ bytes_left = ipath->fspath->bytes_left > s_ptr ?
+ ipath->fspath->bytes_left - s_ptr : 0;
+
+ fspath_min = (char *)ipath->fspath->val + (i + 1) * s_ptr;
+ fspath = iref_to_path(ipath->fs_root, ipath->btrfs_path, iref, eb,
+ inum, fspath_min, bytes_left);
+ if (IS_ERR(fspath))
+ return PTR_ERR(fspath);
+
+ if (fspath > fspath_min) {
+ ipath->fspath->val[i] = (u64)fspath;
+ ++ipath->fspath->elem_cnt;
+ ipath->fspath->bytes_left = fspath - fspath_min;
+ } else {
+ ++ipath->fspath->elem_missed;
+ ipath->fspath->bytes_missing += fspath_min - fspath;
+ ipath->fspath->bytes_left = 0;
+ }
+
+ return 0;
+}
+
+/*
+ * this dumps all file system paths to the inode into the ipath struct, provided
+ * is has been created large enough. each path is zero-terminated and accessed
+ * from ipath->fspath->val[i].
+ * when it returns, there are ipath->fspath->elem_cnt number of paths available
+ * in ipath->fspath->val[]. when the allocated space wasn't sufficient, the
+ * number of missed paths in recored in ipath->fspath->elem_missed, otherwise,
+ * it's zero. ipath->fspath->bytes_missing holds the number of bytes that would
+ * have been needed to return all paths.
+ */
+int paths_from_inode(u64 inum, struct inode_fs_paths *ipath)
+{
+ return iterate_irefs(inum, ipath->fs_root, ipath->btrfs_path,
+ inode_to_path, ipath);
+}
+
+/*
+ * allocates space to return multiple file system paths for an inode.
+ * total_bytes to allocate are passed, note that space usable for actual path
+ * information will be total_bytes - sizeof(struct inode_fs_paths).
+ * the returned pointer must be freed with free_ipath() in the end.
+ */
+struct btrfs_data_container *init_data_container(u32 total_bytes)
+{
+ struct btrfs_data_container *data;
+ size_t alloc_bytes;
+
+ alloc_bytes = max_t(size_t, total_bytes, sizeof(*data));
+ data = kmalloc(alloc_bytes, GFP_NOFS);
+ if (!data)
+ return ERR_PTR(-ENOMEM);
+
+ if (total_bytes >= sizeof(*data)) {
+ data->bytes_left = total_bytes - sizeof(*data);
+ data->bytes_missing = 0;
+ } else {
+ data->bytes_missing = sizeof(*data) - total_bytes;
+ data->bytes_left = 0;
+ }
+
+ data->elem_cnt = 0;
+ data->elem_missed = 0;
+
+ return data;
+}
+
+/*
+ * allocates space to return multiple file system paths for an inode.
+ * total_bytes to allocate are passed, note that space usable for actual path
+ * information will be total_bytes - sizeof(struct inode_fs_paths).
+ * the returned pointer must be freed with free_ipath() in the end.
+ */
+struct inode_fs_paths *init_ipath(s32 total_bytes, struct btrfs_root *fs_root,
+ struct btrfs_path *path)
+{
+ struct inode_fs_paths *ifp;
+ struct btrfs_data_container *fspath;
+
+ fspath = init_data_container(total_bytes);
+ if (IS_ERR(fspath))
+ return (void *)fspath;
+
+ ifp = kmalloc(sizeof(*ifp), GFP_NOFS);
+ if (!ifp) {
+ kfree(fspath);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ ifp->btrfs_path = path;
+ ifp->fspath = fspath;
+ ifp->fs_root = fs_root;
+
+ return ifp;
+}
+
+void free_ipath(struct inode_fs_paths *ipath)
+{
+ kfree(ipath);
+}
--- /dev/null
+/*
+ * Copyright (C) 2011 STRATO. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License v2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write to the
+ * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 021110-1307, USA.
+ */
+
+#ifndef __BTRFS_BACKREF__
+#define __BTRFS_BACKREF__
+
+#include "ioctl.h"
+
+struct inode_fs_paths {
+ struct btrfs_path *btrfs_path;
+ struct btrfs_root *fs_root;
+ struct btrfs_data_container *fspath;
+};
+
+typedef int (iterate_extent_inodes_t)(u64 inum, u64 offset, u64 root,
+ void *ctx);
+typedef int (iterate_irefs_t)(u64 parent, struct btrfs_inode_ref *iref,
+ struct extent_buffer *eb, void *ctx);
+
+int inode_item_info(u64 inum, u64 ioff, struct btrfs_root *fs_root,
+ struct btrfs_path *path);
+
+int extent_from_logical(struct btrfs_fs_info *fs_info, u64 logical,
+ struct btrfs_path *path, struct btrfs_key *found_key);
+
+int tree_backref_for_extent(unsigned long *ptr, struct extent_buffer *eb,
+ struct btrfs_extent_item *ei, u32 item_size,
+ u64 *out_root, u8 *out_level);
+
+int iterate_extent_inodes(struct btrfs_fs_info *fs_info,
+ struct btrfs_path *path,
+ u64 extent_item_objectid,
+ u64 extent_offset,
+ iterate_extent_inodes_t *iterate, void *ctx);
+
+int iterate_inodes_from_logical(u64 logical, struct btrfs_fs_info *fs_info,
+ struct btrfs_path *path,
+ iterate_extent_inodes_t *iterate, void *ctx);
+
+int paths_from_inode(u64 inum, struct inode_fs_paths *ipath);
+
+struct btrfs_data_container *init_data_container(u32 total_bytes);
+struct inode_fs_paths *init_ipath(s32 total_bytes, struct btrfs_root *fs_root,
+ struct btrfs_path *path);
+void free_ipath(struct inode_fs_paths *ipath);
+
+#endif
*/
u64 delalloc_bytes;
- /* total number of bytes that may be used for this inode for
- * delalloc
- */
- u64 reserved_bytes;
-
/*
* the size of the file stored in the metadata on disk. data=ordered
* means the in-memory i_size might be larger than the size on disk
*/
u64 disk_i_size;
- /* flags field from the on disk inode */
- u32 flags;
-
/*
* if this is a directory then index_cnt is the counter for the index
* number for new files that are created
*/
u64 last_unlink_trans;
+ /*
+ * Number of bytes outstanding that are going to need csums. This is
+ * used in ENOSPC accounting.
+ */
+ u64 csum_bytes;
+
+ /* flags field from the on disk inode */
+ u32 flags;
+
/*
* Counters to keep track of the number of extent item's we may use due
* to delalloc and such. outstanding_extents is the number of extent
* the btrfs file release call will add this inode to the
* ordered operations list so that we make sure to flush out any
* new data the application may have written before commit.
- *
- * yes, its silly to have a single bitflag, but we might grow more
- * of these.
*/
unsigned ordered_data_close:1;
unsigned orphan_meta_reserved:1;
unsigned dummy_inode:1;
unsigned in_defrag:1;
+ unsigned delalloc_meta_reserved:1;
/*
* always compress this one file
static inline int compressed_bio_size(struct btrfs_root *root,
unsigned long disk_size)
{
- u16 csum_size = btrfs_super_csum_size(&root->fs_info->super_copy);
+ u16 csum_size = btrfs_super_csum_size(root->fs_info->super_copy);
+
return sizeof(struct compressed_bio) +
((disk_size + root->sectorsize - 1) / root->sectorsize) *
csum_size;
orig_ptr = btrfs_node_blockptr(mid, orig_slot);
- if (level < BTRFS_MAX_LEVEL - 1)
+ if (level < BTRFS_MAX_LEVEL - 1) {
parent = path->nodes[level + 1];
- pslot = path->slots[level + 1];
+ pslot = path->slots[level + 1];
+ }
/*
* deal with the case where there is only one pointer in the root
mid = path->nodes[level];
WARN_ON(btrfs_header_generation(mid) != trans->transid);
- if (level < BTRFS_MAX_LEVEL - 1)
+ if (level < BTRFS_MAX_LEVEL - 1) {
parent = path->nodes[level + 1];
- pslot = path->slots[level + 1];
+ pslot = path->slots[level + 1];
+ }
if (!parent)
return 1;
#include <linux/kobject.h>
#include <trace/events/btrfs.h>
#include <asm/kmap_types.h>
+#include <linux/pagemap.h>
#include "extent_io.h"
#include "extent_map.h"
#include "async-thread.h"
#define BTRFS_SYSTEM_CHUNK_ARRAY_SIZE 2048
#define BTRFS_LABEL_SIZE 256
+/*
+ * just in case we somehow lose the roots and are not able to mount,
+ * we store an array of the roots from previous transactions
+ * in the super.
+ */
+#define BTRFS_NUM_BACKUP_ROOTS 4
+struct btrfs_root_backup {
+ __le64 tree_root;
+ __le64 tree_root_gen;
+
+ __le64 chunk_root;
+ __le64 chunk_root_gen;
+
+ __le64 extent_root;
+ __le64 extent_root_gen;
+
+ __le64 fs_root;
+ __le64 fs_root_gen;
+
+ __le64 dev_root;
+ __le64 dev_root_gen;
+
+ __le64 csum_root;
+ __le64 csum_root_gen;
+
+ __le64 total_bytes;
+ __le64 bytes_used;
+ __le64 num_devices;
+ /* future */
+ __le64 unsed_64[4];
+
+ u8 tree_root_level;
+ u8 chunk_root_level;
+ u8 extent_root_level;
+ u8 fs_root_level;
+ u8 dev_root_level;
+ u8 csum_root_level;
+ /* future and to align */
+ u8 unused_8[10];
+} __attribute__ ((__packed__));
+
/*
* the super block basically lists the main trees of the FS
* it currently lacks any block count etc etc
/* future expansion */
__le64 reserved[31];
u8 sys_chunk_array[BTRFS_SYSTEM_CHUNK_ARRAY_SIZE];
+ struct btrfs_root_backup super_roots[BTRFS_NUM_BACKUP_ROOTS];
} __attribute__ ((__packed__));
/*
struct btrfs_block_rsv {
u64 size;
u64 reserved;
- u64 freed[2];
struct btrfs_space_info *space_info;
- struct list_head list;
spinlock_t lock;
- atomic_t usage;
- unsigned int priority:8;
- unsigned int durable:1;
- unsigned int refill_used:1;
unsigned int full:1;
};
spinlock_t lock;
u64 pinned;
u64 reserved;
- u64 reserved_pinned;
u64 bytes_super;
u64 flags;
u64 sectorsize;
+ u64 cache_generation;
unsigned int ro:1;
unsigned int dirty:1;
unsigned int iref:1;
spinlock_t block_group_cache_lock;
struct rb_root block_group_cache_tree;
+ /* keep track of unallocated space */
+ spinlock_t free_chunk_lock;
+ u64 free_chunk_space;
+
struct extent_io_tree freed_extents[2];
struct extent_io_tree *pinned_extents;
struct btrfs_block_rsv trans_block_rsv;
/* block reservation for chunk tree */
struct btrfs_block_rsv chunk_block_rsv;
+ /* block reservation for delayed operations */
+ struct btrfs_block_rsv delayed_block_rsv;
struct btrfs_block_rsv empty_block_rsv;
- /* list of block reservations that cross multiple transactions */
- struct list_head durable_block_rsv_list;
-
- struct mutex durable_block_rsv_mutex;
-
u64 generation;
u64 last_trans_committed;
wait_queue_head_t transaction_blocked_wait;
wait_queue_head_t async_submit_wait;
- struct btrfs_super_block super_copy;
- struct btrfs_super_block super_for_commit;
+ struct btrfs_super_block *super_copy;
+ struct btrfs_super_block *super_for_commit;
struct block_device *__bdev;
struct super_block *sb;
struct inode *btree_inode;
struct btrfs_workers endio_freespace_worker;
struct btrfs_workers submit_workers;
struct btrfs_workers caching_workers;
+ struct btrfs_workers readahead_workers;
/*
* fixup workers take dirty pages that didn't properly go through
u64 fs_state;
struct btrfs_delayed_root *delayed_root;
+
+ /* readahead tree */
+ spinlock_t reada_lock;
+ struct radix_tree_root reada_tree;
+
+ /* next backup root to be overwritten */
+ int backup_root_index;
};
/*
#define BTRFS_MOUNT_ENOSPC_DEBUG (1 << 15)
#define BTRFS_MOUNT_AUTO_DEFRAG (1 << 16)
#define BTRFS_MOUNT_INODE_MAP_CACHE (1 << 17)
+#define BTRFS_MOUNT_RECOVERY (1 << 18)
#define btrfs_clear_opt(o, opt) ((o) &= ~BTRFS_MOUNT_##opt)
#define btrfs_set_opt(o, opt) ((o) |= BTRFS_MOUNT_##opt)
return root->root_item.flags & BTRFS_ROOT_SUBVOL_RDONLY;
}
+/* struct btrfs_root_backup */
+BTRFS_SETGET_STACK_FUNCS(backup_tree_root, struct btrfs_root_backup,
+ tree_root, 64);
+BTRFS_SETGET_STACK_FUNCS(backup_tree_root_gen, struct btrfs_root_backup,
+ tree_root_gen, 64);
+BTRFS_SETGET_STACK_FUNCS(backup_tree_root_level, struct btrfs_root_backup,
+ tree_root_level, 8);
+
+BTRFS_SETGET_STACK_FUNCS(backup_chunk_root, struct btrfs_root_backup,
+ chunk_root, 64);
+BTRFS_SETGET_STACK_FUNCS(backup_chunk_root_gen, struct btrfs_root_backup,
+ chunk_root_gen, 64);
+BTRFS_SETGET_STACK_FUNCS(backup_chunk_root_level, struct btrfs_root_backup,
+ chunk_root_level, 8);
+
+BTRFS_SETGET_STACK_FUNCS(backup_extent_root, struct btrfs_root_backup,
+ extent_root, 64);
+BTRFS_SETGET_STACK_FUNCS(backup_extent_root_gen, struct btrfs_root_backup,
+ extent_root_gen, 64);
+BTRFS_SETGET_STACK_FUNCS(backup_extent_root_level, struct btrfs_root_backup,
+ extent_root_level, 8);
+
+BTRFS_SETGET_STACK_FUNCS(backup_fs_root, struct btrfs_root_backup,
+ fs_root, 64);
+BTRFS_SETGET_STACK_FUNCS(backup_fs_root_gen, struct btrfs_root_backup,
+ fs_root_gen, 64);
+BTRFS_SETGET_STACK_FUNCS(backup_fs_root_level, struct btrfs_root_backup,
+ fs_root_level, 8);
+
+BTRFS_SETGET_STACK_FUNCS(backup_dev_root, struct btrfs_root_backup,
+ dev_root, 64);
+BTRFS_SETGET_STACK_FUNCS(backup_dev_root_gen, struct btrfs_root_backup,
+ dev_root_gen, 64);
+BTRFS_SETGET_STACK_FUNCS(backup_dev_root_level, struct btrfs_root_backup,
+ dev_root_level, 8);
+
+BTRFS_SETGET_STACK_FUNCS(backup_csum_root, struct btrfs_root_backup,
+ csum_root, 64);
+BTRFS_SETGET_STACK_FUNCS(backup_csum_root_gen, struct btrfs_root_backup,
+ csum_root_gen, 64);
+BTRFS_SETGET_STACK_FUNCS(backup_csum_root_level, struct btrfs_root_backup,
+ csum_root_level, 8);
+BTRFS_SETGET_STACK_FUNCS(backup_total_bytes, struct btrfs_root_backup,
+ total_bytes, 64);
+BTRFS_SETGET_STACK_FUNCS(backup_bytes_used, struct btrfs_root_backup,
+ bytes_used, 64);
+BTRFS_SETGET_STACK_FUNCS(backup_num_devices, struct btrfs_root_backup,
+ num_devices, 64);
+
/* struct btrfs_super_block */
BTRFS_SETGET_STACK_FUNCS(super_bytenr, struct btrfs_super_block, bytenr, 64);
(space_info->flags & BTRFS_BLOCK_GROUP_DATA));
}
+static inline gfp_t btrfs_alloc_write_mask(struct address_space *mapping)
+{
+ return mapping_gfp_mask(mapping) & ~__GFP_FS;
+}
+
/* extent-tree.c */
static inline u64 btrfs_calc_trans_metadata_size(struct btrfs_root *root,
unsigned num_items)
3 * num_items;
}
+/*
+ * Doing a truncate won't result in new nodes or leaves, just what we need for
+ * COW.
+ */
+static inline u64 btrfs_calc_trunc_metadata_size(struct btrfs_root *root,
+ unsigned num_items)
+{
+ return (root->leafsize + root->nodesize * (BTRFS_MAX_LEVEL - 1)) *
+ num_items;
+}
+
void btrfs_put_block_group(struct btrfs_block_group_cache *cache);
int btrfs_run_delayed_refs(struct btrfs_trans_handle *trans,
struct btrfs_root *root, unsigned long count);
u64 num_bytes, u64 *refs, u64 *flags);
int btrfs_pin_extent(struct btrfs_root *root,
u64 bytenr, u64 num, int reserved);
+int btrfs_pin_extent_for_log_replay(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ u64 bytenr, u64 num_bytes);
int btrfs_cross_ref_exist(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
u64 objectid, u64 offset, u64 bytenr);
u64 root_objectid, u64 owner, u64 offset);
int btrfs_free_reserved_extent(struct btrfs_root *root, u64 start, u64 len);
-int btrfs_update_reserved_bytes(struct btrfs_block_group_cache *cache,
- u64 num_bytes, int reserve, int sinfo);
+int btrfs_free_and_pin_reserved_extent(struct btrfs_root *root,
+ u64 start, u64 len);
int btrfs_prepare_extent_commit(struct btrfs_trans_handle *trans,
struct btrfs_root *root);
int btrfs_finish_extent_commit(struct btrfs_trans_handle *trans,
struct btrfs_block_rsv *btrfs_alloc_block_rsv(struct btrfs_root *root);
void btrfs_free_block_rsv(struct btrfs_root *root,
struct btrfs_block_rsv *rsv);
-void btrfs_add_durable_block_rsv(struct btrfs_fs_info *fs_info,
- struct btrfs_block_rsv *rsv);
-int btrfs_block_rsv_add(struct btrfs_trans_handle *trans,
- struct btrfs_root *root,
+int btrfs_block_rsv_add(struct btrfs_root *root,
struct btrfs_block_rsv *block_rsv,
u64 num_bytes);
-int btrfs_block_rsv_check(struct btrfs_trans_handle *trans,
- struct btrfs_root *root,
+int btrfs_block_rsv_add_noflush(struct btrfs_root *root,
+ struct btrfs_block_rsv *block_rsv,
+ u64 num_bytes);
+int btrfs_block_rsv_check(struct btrfs_root *root,
+ struct btrfs_block_rsv *block_rsv, int min_factor);
+int btrfs_block_rsv_refill(struct btrfs_root *root,
struct btrfs_block_rsv *block_rsv,
- u64 min_reserved, int min_factor);
+ u64 min_reserved);
int btrfs_block_rsv_migrate(struct btrfs_block_rsv *src_rsv,
struct btrfs_block_rsv *dst_rsv,
u64 num_bytes);
void btrfs_block_rsv_release(struct btrfs_root *root,
struct btrfs_block_rsv *block_rsv,
u64 num_bytes);
-int btrfs_truncate_reserve_metadata(struct btrfs_trans_handle *trans,
- struct btrfs_root *root,
- struct btrfs_block_rsv *rsv);
int btrfs_set_block_group_ro(struct btrfs_root *root,
struct btrfs_block_group_cache *cache);
int btrfs_set_block_group_rw(struct btrfs_root *root,
smp_mb();
return fs_info->closing;
}
+static inline void free_fs_info(struct btrfs_fs_info *fs_info)
+{
+ kfree(fs_info->delayed_root);
+ kfree(fs_info->extent_root);
+ kfree(fs_info->tree_root);
+ kfree(fs_info->chunk_root);
+ kfree(fs_info->dev_root);
+ kfree(fs_info->csum_root);
+ kfree(fs_info->super_copy);
+ kfree(fs_info->super_for_commit);
+ kfree(fs_info);
+}
/* root-item.c */
int btrfs_find_root_ref(struct btrfs_root *tree_root,
int btrfs_orphan_add(struct btrfs_trans_handle *trans, struct inode *inode);
int btrfs_orphan_del(struct btrfs_trans_handle *trans, struct inode *inode);
int btrfs_orphan_cleanup(struct btrfs_root *root);
-void btrfs_orphan_pre_snapshot(struct btrfs_trans_handle *trans,
- struct btrfs_pending_snapshot *pending,
- u64 *bytes_to_reserve);
-void btrfs_orphan_post_snapshot(struct btrfs_trans_handle *trans,
- struct btrfs_pending_snapshot *pending);
void btrfs_orphan_commit_root(struct btrfs_trans_handle *trans,
struct btrfs_root *root);
int btrfs_cont_expand(struct inode *inode, loff_t oldsize, loff_t size);
int btrfs_scrub_progress(struct btrfs_root *root, u64 devid,
struct btrfs_scrub_progress *progress);
+/* reada.c */
+struct reada_control {
+ struct btrfs_root *root; /* tree to prefetch */
+ struct btrfs_key key_start;
+ struct btrfs_key key_end; /* exclusive */
+ atomic_t elems;
+ struct kref refcnt;
+ wait_queue_head_t wait;
+};
+struct reada_control *btrfs_reada_add(struct btrfs_root *root,
+ struct btrfs_key *start, struct btrfs_key *end);
+int btrfs_reada_wait(void *handle);
+void btrfs_reada_detach(void *handle);
+int btree_readahead_hook(struct btrfs_root *root, struct extent_buffer *eb,
+ u64 start, int err);
+
#endif
return 0;
src_rsv = trans->block_rsv;
- dst_rsv = &root->fs_info->global_block_rsv;
+ dst_rsv = &root->fs_info->delayed_block_rsv;
num_bytes = btrfs_calc_trans_metadata_size(root, 1);
ret = btrfs_block_rsv_migrate(src_rsv, dst_rsv, num_bytes);
if (!item->bytes_reserved)
return;
- rsv = &root->fs_info->global_block_rsv;
+ rsv = &root->fs_info->delayed_block_rsv;
btrfs_block_rsv_release(root, rsv,
item->bytes_reserved);
}
static int btrfs_delayed_inode_reserve_metadata(
struct btrfs_trans_handle *trans,
struct btrfs_root *root,
+ struct inode *inode,
struct btrfs_delayed_node *node)
{
struct btrfs_block_rsv *src_rsv;
struct btrfs_block_rsv *dst_rsv;
u64 num_bytes;
int ret;
-
- if (!trans->bytes_reserved)
- return 0;
+ int release = false;
src_rsv = trans->block_rsv;
- dst_rsv = &root->fs_info->global_block_rsv;
+ dst_rsv = &root->fs_info->delayed_block_rsv;
num_bytes = btrfs_calc_trans_metadata_size(root, 1);
+
+ /*
+ * btrfs_dirty_inode will update the inode under btrfs_join_transaction
+ * which doesn't reserve space for speed. This is a problem since we
+ * still need to reserve space for this update, so try to reserve the
+ * space.
+ *
+ * Now if src_rsv == delalloc_block_rsv we'll let it just steal since
+ * we're accounted for.
+ */
+ if (!trans->bytes_reserved &&
+ src_rsv != &root->fs_info->delalloc_block_rsv) {
+ ret = btrfs_block_rsv_add_noflush(root, dst_rsv, num_bytes);
+ /*
+ * Since we're under a transaction reserve_metadata_bytes could
+ * try to commit the transaction which will make it return
+ * EAGAIN to make us stop the transaction we have, so return
+ * ENOSPC instead so that btrfs_dirty_inode knows what to do.
+ */
+ if (ret == -EAGAIN)
+ ret = -ENOSPC;
+ if (!ret)
+ node->bytes_reserved = num_bytes;
+ return ret;
+ } else if (src_rsv == &root->fs_info->delalloc_block_rsv) {
+ spin_lock(&BTRFS_I(inode)->lock);
+ if (BTRFS_I(inode)->delalloc_meta_reserved) {
+ BTRFS_I(inode)->delalloc_meta_reserved = 0;
+ spin_unlock(&BTRFS_I(inode)->lock);
+ release = true;
+ goto migrate;
+ }
+ spin_unlock(&BTRFS_I(inode)->lock);
+
+ /* Ok we didn't have space pre-reserved. This shouldn't happen
+ * too often but it can happen if we do delalloc to an existing
+ * inode which gets dirtied because of the time update, and then
+ * isn't touched again until after the transaction commits and
+ * then we try to write out the data. First try to be nice and
+ * reserve something strictly for us. If not be a pain and try
+ * to steal from the delalloc block rsv.
+ */
+ ret = btrfs_block_rsv_add_noflush(root, dst_rsv, num_bytes);
+ if (!ret)
+ goto out;
+
+ ret = btrfs_block_rsv_migrate(src_rsv, dst_rsv, num_bytes);
+ if (!ret)
+ goto out;
+
+ /*
+ * Ok this is a problem, let's just steal from the global rsv
+ * since this really shouldn't happen that often.
+ */
+ WARN_ON(1);
+ ret = btrfs_block_rsv_migrate(&root->fs_info->global_block_rsv,
+ dst_rsv, num_bytes);
+ goto out;
+ }
+
+migrate:
ret = btrfs_block_rsv_migrate(src_rsv, dst_rsv, num_bytes);
+
+out:
+ /*
+ * Migrate only takes a reservation, it doesn't touch the size of the
+ * block_rsv. This is to simplify people who don't normally have things
+ * migrated from their block rsv. If they go to release their
+ * reservation, that will decrease the size as well, so if migrate
+ * reduced size we'd end up with a negative size. But for the
+ * delalloc_meta_reserved stuff we will only know to drop 1 reservation,
+ * but we could in fact do this reserve/migrate dance several times
+ * between the time we did the original reservation and we'd clean it
+ * up. So to take care of this, release the space for the meta
+ * reservation here. I think it may be time for a documentation page on
+ * how block rsvs. work.
+ */
if (!ret)
node->bytes_reserved = num_bytes;
+ if (release)
+ btrfs_block_rsv_release(root, src_rsv, num_bytes);
+
return ret;
}
if (!node->bytes_reserved)
return;
- rsv = &root->fs_info->global_block_rsv;
+ rsv = &root->fs_info->delayed_block_rsv;
btrfs_block_rsv_release(root, rsv,
node->bytes_reserved);
node->bytes_reserved = 0;
path->leave_spinning = 1;
block_rsv = trans->block_rsv;
- trans->block_rsv = &root->fs_info->global_block_rsv;
+ trans->block_rsv = &root->fs_info->delayed_block_rsv;
delayed_root = btrfs_get_delayed_root(root);
path->leave_spinning = 1;
block_rsv = trans->block_rsv;
- trans->block_rsv = &node->root->fs_info->global_block_rsv;
+ trans->block_rsv = &node->root->fs_info->delayed_block_rsv;
ret = btrfs_insert_delayed_items(trans, path, node->root, node);
if (!ret)
goto free_path;
block_rsv = trans->block_rsv;
- trans->block_rsv = &root->fs_info->global_block_rsv;
+ trans->block_rsv = &root->fs_info->delayed_block_rsv;
ret = btrfs_insert_delayed_items(trans, path, root, delayed_node);
if (!ret)
goto release_node;
}
- ret = btrfs_delayed_inode_reserve_metadata(trans, root, delayed_node);
- /*
- * we must reserve enough space when we start a new transaction,
- * so reserving metadata failure is impossible
- */
- BUG_ON(ret);
+ ret = btrfs_delayed_inode_reserve_metadata(trans, root, inode,
+ delayed_node);
+ if (ret)
+ goto release_node;
fill_stack_inode_item(trans, &delayed_node->inode_item, inode);
delayed_node->inode_dirty = 1;
static int csum_tree_block(struct btrfs_root *root, struct extent_buffer *buf,
int verify)
{
- u16 csum_size =
- btrfs_super_csum_size(&root->fs_info->super_copy);
+ u16 csum_size = btrfs_super_csum_size(root->fs_info->super_copy);
char *result = NULL;
unsigned long len;
unsigned long cur_len;
clear_bit(EXTENT_BUFFER_CORRUPT, &eb->bflags);
io_tree = &BTRFS_I(root->fs_info->btree_inode)->io_tree;
while (1) {
- ret = read_extent_buffer_pages(io_tree, eb, start, 1,
+ ret = read_extent_buffer_pages(io_tree, eb, start,
+ WAIT_COMPLETE,
btree_get_extent, mirror_num);
if (!ret &&
!verify_parent_transid(io_tree, eb, parent_transid))
end = min_t(u64, eb->len, PAGE_CACHE_SIZE);
end = eb->start + end - 1;
err:
+ if (test_bit(EXTENT_BUFFER_READAHEAD, &eb->bflags)) {
+ clear_bit(EXTENT_BUFFER_READAHEAD, &eb->bflags);
+ btree_readahead_hook(root, eb, eb->start, ret);
+ }
+
free_extent_buffer(eb);
out:
return ret;
}
+static int btree_io_failed_hook(struct bio *failed_bio,
+ struct page *page, u64 start, u64 end,
+ u64 mirror_num, struct extent_state *state)
+{
+ struct extent_io_tree *tree;
+ unsigned long len;
+ struct extent_buffer *eb;
+ struct btrfs_root *root = BTRFS_I(page->mapping->host)->root;
+
+ tree = &BTRFS_I(page->mapping->host)->io_tree;
+ if (page->private == EXTENT_PAGE_PRIVATE)
+ goto out;
+ if (!page->private)
+ goto out;
+
+ len = page->private >> 2;
+ WARN_ON(len == 0);
+
+ eb = alloc_extent_buffer(tree, start, len, page);
+ if (eb == NULL)
+ goto out;
+
+ if (test_bit(EXTENT_BUFFER_READAHEAD, &eb->bflags)) {
+ clear_bit(EXTENT_BUFFER_READAHEAD, &eb->bflags);
+ btree_readahead_hook(root, eb, eb->start, -EIO);
+ }
+ free_extent_buffer(eb);
+
+out:
+ return -EIO; /* we fixed nothing */
+}
+
static void end_workqueue_bio(struct bio *bio, int err)
{
struct end_io_wq *end_io_wq = bio->bi_private;
{
struct extent_io_tree *tree;
tree = &BTRFS_I(page->mapping->host)->io_tree;
- return extent_read_full_page(tree, page, btree_get_extent);
+ return extent_read_full_page(tree, page, btree_get_extent, 0);
}
static int btree_releasepage(struct page *page, gfp_t gfp_flags)
if (!buf)
return 0;
read_extent_buffer_pages(&BTRFS_I(btree_inode)->io_tree,
- buf, 0, 0, btree_get_extent, 0);
+ buf, 0, WAIT_NONE, btree_get_extent, 0);
free_extent_buffer(buf);
return ret;
}
+int reada_tree_block_flagged(struct btrfs_root *root, u64 bytenr, u32 blocksize,
+ int mirror_num, struct extent_buffer **eb)
+{
+ struct extent_buffer *buf = NULL;
+ struct inode *btree_inode = root->fs_info->btree_inode;
+ struct extent_io_tree *io_tree = &BTRFS_I(btree_inode)->io_tree;
+ int ret;
+
+ buf = btrfs_find_create_tree_block(root, bytenr, blocksize);
+ if (!buf)
+ return 0;
+
+ set_bit(EXTENT_BUFFER_READAHEAD, &buf->bflags);
+
+ ret = read_extent_buffer_pages(io_tree, buf, 0, WAIT_PAGE_LOCK,
+ btree_get_extent, mirror_num);
+ if (ret) {
+ free_extent_buffer(buf);
+ return ret;
+ }
+
+ if (test_bit(EXTENT_BUFFER_CORRUPT, &buf->bflags)) {
+ free_extent_buffer(buf);
+ return -EIO;
+ } else if (extent_buffer_uptodate(io_tree, buf, NULL)) {
+ *eb = buf;
+ } else {
+ free_extent_buffer(buf);
+ }
+ return 0;
+}
+
struct extent_buffer *btrfs_find_tree_block(struct btrfs_root *root,
u64 bytenr, u32 blocksize)
{
generation = btrfs_root_generation(&root->root_item);
blocksize = btrfs_level_size(root, btrfs_root_level(&root->root_item));
+ root->commit_root = NULL;
root->node = read_tree_block(root, btrfs_root_bytenr(&root->root_item),
blocksize, generation);
if (!root->node || !btrfs_buffer_uptodate(root->node, generation)) {
free_extent_buffer(root->node);
+ root->node = NULL;
return -EIO;
}
root->commit_root = btrfs_root_node(root);
return 0;
}
+/*
+ * this will find the highest generation in the array of
+ * root backups. The index of the highest array is returned,
+ * or -1 if we can't find anything.
+ *
+ * We check to make sure the array is valid by comparing the
+ * generation of the latest root in the array with the generation
+ * in the super block. If they don't match we pitch it.
+ */
+static int find_newest_super_backup(struct btrfs_fs_info *info, u64 newest_gen)
+{
+ u64 cur;
+ int newest_index = -1;
+ struct btrfs_root_backup *root_backup;
+ int i;
+
+ for (i = 0; i < BTRFS_NUM_BACKUP_ROOTS; i++) {
+ root_backup = info->super_copy->super_roots + i;
+ cur = btrfs_backup_tree_root_gen(root_backup);
+ if (cur == newest_gen)
+ newest_index = i;
+ }
+
+ /* check to see if we actually wrapped around */
+ if (newest_index == BTRFS_NUM_BACKUP_ROOTS - 1) {
+ root_backup = info->super_copy->super_roots;
+ cur = btrfs_backup_tree_root_gen(root_backup);
+ if (cur == newest_gen)
+ newest_index = 0;
+ }
+ return newest_index;
+}
+
+
+/*
+ * find the oldest backup so we know where to store new entries
+ * in the backup array. This will set the backup_root_index
+ * field in the fs_info struct
+ */
+static void find_oldest_super_backup(struct btrfs_fs_info *info,
+ u64 newest_gen)
+{
+ int newest_index = -1;
+
+ newest_index = find_newest_super_backup(info, newest_gen);
+ /* if there was garbage in there, just move along */
+ if (newest_index == -1) {
+ info->backup_root_index = 0;
+ } else {
+ info->backup_root_index = (newest_index + 1) % BTRFS_NUM_BACKUP_ROOTS;
+ }
+}
+
+/*
+ * copy all the root pointers into the super backup array.
+ * this will bump the backup pointer by one when it is
+ * done
+ */
+static void backup_super_roots(struct btrfs_fs_info *info)
+{
+ int next_backup;
+ struct btrfs_root_backup *root_backup;
+ int last_backup;
+
+ next_backup = info->backup_root_index;
+ last_backup = (next_backup + BTRFS_NUM_BACKUP_ROOTS - 1) %
+ BTRFS_NUM_BACKUP_ROOTS;
+
+ /*
+ * just overwrite the last backup if we're at the same generation
+ * this happens only at umount
+ */
+ root_backup = info->super_for_commit->super_roots + last_backup;
+ if (btrfs_backup_tree_root_gen(root_backup) ==
+ btrfs_header_generation(info->tree_root->node))
+ next_backup = last_backup;
+
+ root_backup = info->super_for_commit->super_roots + next_backup;
+
+ /*
+ * make sure all of our padding and empty slots get zero filled
+ * regardless of which ones we use today
+ */
+ memset(root_backup, 0, sizeof(*root_backup));
+
+ info->backup_root_index = (next_backup + 1) % BTRFS_NUM_BACKUP_ROOTS;
+
+ btrfs_set_backup_tree_root(root_backup, info->tree_root->node->start);
+ btrfs_set_backup_tree_root_gen(root_backup,
+ btrfs_header_generation(info->tree_root->node));
+
+ btrfs_set_backup_tree_root_level(root_backup,
+ btrfs_header_level(info->tree_root->node));
+
+ btrfs_set_backup_chunk_root(root_backup, info->chunk_root->node->start);
+ btrfs_set_backup_chunk_root_gen(root_backup,
+ btrfs_header_generation(info->chunk_root->node));
+ btrfs_set_backup_chunk_root_level(root_backup,
+ btrfs_header_level(info->chunk_root->node));
+
+ btrfs_set_backup_extent_root(root_backup, info->extent_root->node->start);
+ btrfs_set_backup_extent_root_gen(root_backup,
+ btrfs_header_generation(info->extent_root->node));
+ btrfs_set_backup_extent_root_level(root_backup,
+ btrfs_header_level(info->extent_root->node));
+
+ /*
+ * we might commit during log recovery, which happens before we set
+ * the fs_root. Make sure it is valid before we fill it in.
+ */
+ if (info->fs_root && info->fs_root->node) {
+ btrfs_set_backup_fs_root(root_backup,
+ info->fs_root->node->start);
+ btrfs_set_backup_fs_root_gen(root_backup,
+ btrfs_header_generation(info->fs_root->node));
+ btrfs_set_backup_fs_root_level(root_backup,
+ btrfs_header_level(info->fs_root->node));
+ }
+
+ btrfs_set_backup_dev_root(root_backup, info->dev_root->node->start);
+ btrfs_set_backup_dev_root_gen(root_backup,
+ btrfs_header_generation(info->dev_root->node));
+ btrfs_set_backup_dev_root_level(root_backup,
+ btrfs_header_level(info->dev_root->node));
+
+ btrfs_set_backup_csum_root(root_backup, info->csum_root->node->start);
+ btrfs_set_backup_csum_root_gen(root_backup,
+ btrfs_header_generation(info->csum_root->node));
+ btrfs_set_backup_csum_root_level(root_backup,
+ btrfs_header_level(info->csum_root->node));
+
+ btrfs_set_backup_total_bytes(root_backup,
+ btrfs_super_total_bytes(info->super_copy));
+ btrfs_set_backup_bytes_used(root_backup,
+ btrfs_super_bytes_used(info->super_copy));
+ btrfs_set_backup_num_devices(root_backup,
+ btrfs_super_num_devices(info->super_copy));
+
+ /*
+ * if we don't copy this out to the super_copy, it won't get remembered
+ * for the next commit
+ */
+ memcpy(&info->super_copy->super_roots,
+ &info->super_for_commit->super_roots,
+ sizeof(*root_backup) * BTRFS_NUM_BACKUP_ROOTS);
+}
+
+/*
+ * this copies info out of the root backup array and back into
+ * the in-memory super block. It is meant to help iterate through
+ * the array, so you send it the number of backups you've already
+ * tried and the last backup index you used.
+ *
+ * this returns -1 when it has tried all the backups
+ */
+static noinline int next_root_backup(struct btrfs_fs_info *info,
+ struct btrfs_super_block *super,
+ int *num_backups_tried, int *backup_index)
+{
+ struct btrfs_root_backup *root_backup;
+ int newest = *backup_index;
+
+ if (*num_backups_tried == 0) {
+ u64 gen = btrfs_super_generation(super);
+
+ newest = find_newest_super_backup(info, gen);
+ if (newest == -1)
+ return -1;
+
+ *backup_index = newest;
+ *num_backups_tried = 1;
+ } else if (*num_backups_tried == BTRFS_NUM_BACKUP_ROOTS) {
+ /* we've tried all the backups, all done */
+ return -1;
+ } else {
+ /* jump to the next oldest backup */
+ newest = (*backup_index + BTRFS_NUM_BACKUP_ROOTS - 1) %
+ BTRFS_NUM_BACKUP_ROOTS;
+ *backup_index = newest;
+ *num_backups_tried += 1;
+ }
+ root_backup = super->super_roots + newest;
+
+ btrfs_set_super_generation(super,
+ btrfs_backup_tree_root_gen(root_backup));
+ btrfs_set_super_root(super, btrfs_backup_tree_root(root_backup));
+ btrfs_set_super_root_level(super,
+ btrfs_backup_tree_root_level(root_backup));
+ btrfs_set_super_bytes_used(super, btrfs_backup_bytes_used(root_backup));
+
+ /*
+ * fixme: the total bytes and num_devices need to match or we should
+ * need a fsck
+ */
+ btrfs_set_super_total_bytes(super, btrfs_backup_total_bytes(root_backup));
+ btrfs_set_super_num_devices(super, btrfs_backup_num_devices(root_backup));
+ return 0;
+}
+
+/* helper to cleanup tree roots */
+static void free_root_pointers(struct btrfs_fs_info *info, int chunk_root)
+{
+ free_extent_buffer(info->tree_root->node);
+ free_extent_buffer(info->tree_root->commit_root);
+ free_extent_buffer(info->dev_root->node);
+ free_extent_buffer(info->dev_root->commit_root);
+ free_extent_buffer(info->extent_root->node);
+ free_extent_buffer(info->extent_root->commit_root);
+ free_extent_buffer(info->csum_root->node);
+ free_extent_buffer(info->csum_root->commit_root);
+
+ info->tree_root->node = NULL;
+ info->tree_root->commit_root = NULL;
+ info->dev_root->node = NULL;
+ info->dev_root->commit_root = NULL;
+ info->extent_root->node = NULL;
+ info->extent_root->commit_root = NULL;
+ info->csum_root->node = NULL;
+ info->csum_root->commit_root = NULL;
+
+ if (chunk_root) {
+ free_extent_buffer(info->chunk_root->node);
+ free_extent_buffer(info->chunk_root->commit_root);
+ info->chunk_root->node = NULL;
+ info->chunk_root->commit_root = NULL;
+ }
+}
+
+
struct btrfs_root *open_ctree(struct super_block *sb,
struct btrfs_fs_devices *fs_devices,
char *options)
u64 features;
struct btrfs_key location;
struct buffer_head *bh;
- struct btrfs_root *extent_root = kzalloc(sizeof(struct btrfs_root),
- GFP_NOFS);
- struct btrfs_root *csum_root = kzalloc(sizeof(struct btrfs_root),
- GFP_NOFS);
+ struct btrfs_super_block *disk_super;
struct btrfs_root *tree_root = btrfs_sb(sb);
- struct btrfs_fs_info *fs_info = NULL;
- struct btrfs_root *chunk_root = kzalloc(sizeof(struct btrfs_root),
- GFP_NOFS);
- struct btrfs_root *dev_root = kzalloc(sizeof(struct btrfs_root),
- GFP_NOFS);
+ struct btrfs_fs_info *fs_info = tree_root->fs_info;
+ struct btrfs_root *extent_root;
+ struct btrfs_root *csum_root;
+ struct btrfs_root *chunk_root;
+ struct btrfs_root *dev_root;
struct btrfs_root *log_tree_root;
-
int ret;
int err = -EINVAL;
-
- struct btrfs_super_block *disk_super;
-
- if (!extent_root || !tree_root || !tree_root->fs_info ||
- !chunk_root || !dev_root || !csum_root) {
+ int num_backups_tried = 0;
+ int backup_index = 0;
+
+ extent_root = fs_info->extent_root =
+ kzalloc(sizeof(struct btrfs_root), GFP_NOFS);
+ csum_root = fs_info->csum_root =
+ kzalloc(sizeof(struct btrfs_root), GFP_NOFS);
+ chunk_root = fs_info->chunk_root =
+ kzalloc(sizeof(struct btrfs_root), GFP_NOFS);
+ dev_root = fs_info->dev_root =
+ kzalloc(sizeof(struct btrfs_root), GFP_NOFS);
+
+ if (!extent_root || !csum_root || !chunk_root || !dev_root) {
err = -ENOMEM;
goto fail;
}
- fs_info = tree_root->fs_info;
ret = init_srcu_struct(&fs_info->subvol_srcu);
if (ret) {
spin_lock_init(&fs_info->fs_roots_radix_lock);
spin_lock_init(&fs_info->delayed_iput_lock);
spin_lock_init(&fs_info->defrag_inodes_lock);
+ spin_lock_init(&fs_info->free_chunk_lock);
mutex_init(&fs_info->reloc_mutex);
init_completion(&fs_info->kobj_unregister);
- fs_info->tree_root = tree_root;
- fs_info->extent_root = extent_root;
- fs_info->csum_root = csum_root;
- fs_info->chunk_root = chunk_root;
- fs_info->dev_root = dev_root;
- fs_info->fs_devices = fs_devices;
INIT_LIST_HEAD(&fs_info->dirty_cowonly_roots);
INIT_LIST_HEAD(&fs_info->space_info);
btrfs_mapping_init(&fs_info->mapping_tree);
btrfs_init_block_rsv(&fs_info->trans_block_rsv);
btrfs_init_block_rsv(&fs_info->chunk_block_rsv);
btrfs_init_block_rsv(&fs_info->empty_block_rsv);
- INIT_LIST_HEAD(&fs_info->durable_block_rsv_list);
- mutex_init(&fs_info->durable_block_rsv_mutex);
+ btrfs_init_block_rsv(&fs_info->delayed_block_rsv);
atomic_set(&fs_info->nr_async_submits, 0);
atomic_set(&fs_info->async_delalloc_pages, 0);
atomic_set(&fs_info->async_submit_draining, 0);
fs_info->metadata_ratio = 0;
fs_info->defrag_inodes = RB_ROOT;
fs_info->trans_no_join = 0;
+ fs_info->free_chunk_space = 0;
+
+ /* readahead state */
+ INIT_RADIX_TREE(&fs_info->reada_tree, GFP_NOFS & ~__GFP_WAIT);
+ spin_lock_init(&fs_info->reada_lock);
fs_info->thread_pool_size = min_t(unsigned long,
num_online_cpus() + 2, 8);
goto fail_alloc;
}
- memcpy(&fs_info->super_copy, bh->b_data, sizeof(fs_info->super_copy));
- memcpy(&fs_info->super_for_commit, &fs_info->super_copy,
- sizeof(fs_info->super_for_commit));
+ memcpy(fs_info->super_copy, bh->b_data, sizeof(*fs_info->super_copy));
+ memcpy(fs_info->super_for_commit, fs_info->super_copy,
+ sizeof(*fs_info->super_for_commit));
brelse(bh);
- memcpy(fs_info->fsid, fs_info->super_copy.fsid, BTRFS_FSID_SIZE);
+ memcpy(fs_info->fsid, fs_info->super_copy->fsid, BTRFS_FSID_SIZE);
- disk_super = &fs_info->super_copy;
+ disk_super = fs_info->super_copy;
if (!btrfs_super_root(disk_super))
goto fail_alloc;
btrfs_check_super_valid(fs_info, sb->s_flags & MS_RDONLY);
+ /*
+ * run through our array of backup supers and setup
+ * our ring pointer to the oldest one
+ */
+ generation = btrfs_super_generation(disk_super);
+ find_oldest_super_backup(fs_info, generation);
+
/*
* In the long term, we'll store the compression type in the super
* block, and it'll be used for per file compression control.
btrfs_init_workers(&fs_info->delayed_workers, "delayed-meta",
fs_info->thread_pool_size,
&fs_info->generic_worker);
+ btrfs_init_workers(&fs_info->readahead_workers, "readahead",
+ fs_info->thread_pool_size,
+ &fs_info->generic_worker);
/*
* endios are largely parallel and should have a very
fs_info->endio_write_workers.idle_thresh = 2;
fs_info->endio_meta_write_workers.idle_thresh = 2;
+ fs_info->readahead_workers.idle_thresh = 2;
btrfs_start_workers(&fs_info->workers, 1);
btrfs_start_workers(&fs_info->generic_worker, 1);
btrfs_start_workers(&fs_info->endio_freespace_worker, 1);
btrfs_start_workers(&fs_info->delayed_workers, 1);
btrfs_start_workers(&fs_info->caching_workers, 1);
+ btrfs_start_workers(&fs_info->readahead_workers, 1);
fs_info->bdi.ra_pages *= btrfs_super_num_devices(disk_super);
fs_info->bdi.ra_pages = max(fs_info->bdi.ra_pages,
if (!test_bit(EXTENT_BUFFER_UPTODATE, &chunk_root->node->bflags)) {
printk(KERN_WARNING "btrfs: failed to read chunk root on %s\n",
sb->s_id);
- goto fail_chunk_root;
+ goto fail_tree_roots;
}
btrfs_set_root_node(&chunk_root->root_item, chunk_root->node);
chunk_root->commit_root = btrfs_root_node(chunk_root);
if (ret) {
printk(KERN_WARNING "btrfs: failed to read chunk tree on %s\n",
sb->s_id);
- goto fail_chunk_root;
+ goto fail_tree_roots;
}
btrfs_close_extra_devices(fs_devices);
+retry_root_backup:
blocksize = btrfs_level_size(tree_root,
btrfs_super_root_level(disk_super));
generation = btrfs_super_generation(disk_super);
tree_root->node = read_tree_block(tree_root,
btrfs_super_root(disk_super),
blocksize, generation);
- if (!tree_root->node)
- goto fail_chunk_root;
- if (!test_bit(EXTENT_BUFFER_UPTODATE, &tree_root->node->bflags)) {
+ if (!tree_root->node ||
+ !test_bit(EXTENT_BUFFER_UPTODATE, &tree_root->node->bflags)) {
printk(KERN_WARNING "btrfs: failed to read tree root on %s\n",
sb->s_id);
- goto fail_tree_root;
+
+ goto recovery_tree_root;
}
+
btrfs_set_root_node(&tree_root->root_item, tree_root->node);
tree_root->commit_root = btrfs_root_node(tree_root);
ret = find_and_setup_root(tree_root, fs_info,
BTRFS_EXTENT_TREE_OBJECTID, extent_root);
if (ret)
- goto fail_tree_root;
+ goto recovery_tree_root;
extent_root->track_dirty = 1;
ret = find_and_setup_root(tree_root, fs_info,
BTRFS_DEV_TREE_OBJECTID, dev_root);
if (ret)
- goto fail_extent_root;
+ goto recovery_tree_root;
dev_root->track_dirty = 1;
ret = find_and_setup_root(tree_root, fs_info,
BTRFS_CSUM_TREE_OBJECTID, csum_root);
if (ret)
- goto fail_dev_root;
+ goto recovery_tree_root;
csum_root->track_dirty = 1;
fail_block_groups:
btrfs_free_block_groups(fs_info);
- free_extent_buffer(csum_root->node);
- free_extent_buffer(csum_root->commit_root);
-fail_dev_root:
- free_extent_buffer(dev_root->node);
- free_extent_buffer(dev_root->commit_root);
-fail_extent_root:
- free_extent_buffer(extent_root->node);
- free_extent_buffer(extent_root->commit_root);
-fail_tree_root:
- free_extent_buffer(tree_root->node);
- free_extent_buffer(tree_root->commit_root);
-fail_chunk_root:
- free_extent_buffer(chunk_root->node);
- free_extent_buffer(chunk_root->commit_root);
+
+fail_tree_roots:
+ free_root_pointers(fs_info, 1);
+
fail_sb_buffer:
btrfs_stop_workers(&fs_info->generic_worker);
+ btrfs_stop_workers(&fs_info->readahead_workers);
btrfs_stop_workers(&fs_info->fixup_workers);
btrfs_stop_workers(&fs_info->delalloc_workers);
btrfs_stop_workers(&fs_info->workers);
btrfs_stop_workers(&fs_info->delayed_workers);
btrfs_stop_workers(&fs_info->caching_workers);
fail_alloc:
- kfree(fs_info->delayed_root);
fail_iput:
+ btrfs_mapping_tree_free(&fs_info->mapping_tree);
+
invalidate_inode_pages2(fs_info->btree_inode->i_mapping);
iput(fs_info->btree_inode);
-
- btrfs_close_devices(fs_info->fs_devices);
- btrfs_mapping_tree_free(&fs_info->mapping_tree);
fail_bdi:
bdi_destroy(&fs_info->bdi);
fail_srcu:
cleanup_srcu_struct(&fs_info->subvol_srcu);
fail:
- kfree(extent_root);
- kfree(tree_root);
- kfree(fs_info);
- kfree(chunk_root);
- kfree(dev_root);
- kfree(csum_root);
+ btrfs_close_devices(fs_info->fs_devices);
+ free_fs_info(fs_info);
return ERR_PTR(err);
+
+recovery_tree_root:
+ if (!btrfs_test_opt(tree_root, RECOVERY))
+ goto fail_tree_roots;
+
+ free_root_pointers(fs_info, 0);
+
+ /* don't use the log in recovery mode, it won't be valid */
+ btrfs_set_super_log_root(disk_super, 0);
+
+ /* we can't trust the free space cache either */
+ btrfs_set_opt(fs_info->mount_opt, CLEAR_CACHE);
+
+ ret = next_root_backup(fs_info, fs_info->super_copy,
+ &num_backups_tried, &backup_index);
+ if (ret == -1)
+ goto fail_block_groups;
+ goto retry_root_backup;
}
static void btrfs_end_buffer_write_sync(struct buffer_head *bh, int uptodate)
int total_errors = 0;
u64 flags;
- max_errors = btrfs_super_num_devices(&root->fs_info->super_copy) - 1;
+ max_errors = btrfs_super_num_devices(root->fs_info->super_copy) - 1;
do_barriers = !btrfs_test_opt(root, NOBARRIER);
+ backup_super_roots(root->fs_info);
- sb = &root->fs_info->super_for_commit;
+ sb = root->fs_info->super_for_commit;
dev_item = &sb->dev_item;
mutex_lock(&root->fs_info->fs_devices->device_list_mutex);
/* clear out the rbtree of defraggable inodes */
btrfs_run_defrag_inodes(root->fs_info);
- btrfs_put_block_group_cache(fs_info);
-
/*
* Here come 2 situations when btrfs is broken to flip readonly:
*
printk(KERN_ERR "btrfs: commit super ret %d\n", ret);
}
+ btrfs_put_block_group_cache(fs_info);
+
kthread_stop(root->fs_info->transaction_kthread);
kthread_stop(root->fs_info->cleaner_kthread);
del_fs_roots(fs_info);
iput(fs_info->btree_inode);
- kfree(fs_info->delayed_root);
btrfs_stop_workers(&fs_info->generic_worker);
btrfs_stop_workers(&fs_info->fixup_workers);
btrfs_stop_workers(&fs_info->submit_workers);
btrfs_stop_workers(&fs_info->delayed_workers);
btrfs_stop_workers(&fs_info->caching_workers);
+ btrfs_stop_workers(&fs_info->readahead_workers);
btrfs_close_devices(fs_info->fs_devices);
btrfs_mapping_tree_free(&fs_info->mapping_tree);
bdi_destroy(&fs_info->bdi);
cleanup_srcu_struct(&fs_info->subvol_srcu);
- kfree(fs_info->extent_root);
- kfree(fs_info->tree_root);
- kfree(fs_info->chunk_root);
- kfree(fs_info->dev_root);
- kfree(fs_info->csum_root);
- kfree(fs_info);
+ free_fs_info(fs_info);
return 0;
}
return ret;
}
-int btree_lock_page_hook(struct page *page)
+static int btree_lock_page_hook(struct page *page, void *data,
+ void (*flush_fn)(void *))
{
struct inode *inode = page->mapping->host;
struct btrfs_root *root = BTRFS_I(inode)->root;
if (!eb)
goto out;
- btrfs_tree_lock(eb);
+ if (!btrfs_try_tree_write_lock(eb)) {
+ flush_fn(data);
+ btrfs_tree_lock(eb);
+ }
btrfs_set_header_flag(eb, BTRFS_HEADER_FLAG_WRITTEN);
if (test_and_clear_bit(EXTENT_BUFFER_DIRTY, &eb->bflags)) {
btrfs_tree_unlock(eb);
free_extent_buffer(eb);
out:
- lock_page(page);
+ if (!trylock_page(page)) {
+ flush_fn(data);
+ lock_page(page);
+ }
return 0;
}
static struct extent_io_ops btree_extent_io_ops = {
.write_cache_pages_lock_hook = btree_lock_page_hook,
.readpage_end_io_hook = btree_readpage_end_io_hook,
+ .readpage_io_failed_hook = btree_io_failed_hook,
.submit_bio_hook = btree_submit_bio_hook,
/* note we're sharing with inode.c for the merge bio hook */
.merge_bio_hook = btrfs_merge_bio_hook,
u32 blocksize, u64 parent_transid);
int readahead_tree_block(struct btrfs_root *root, u64 bytenr, u32 blocksize,
u64 parent_transid);
+int reada_tree_block_flagged(struct btrfs_root *root, u64 bytenr, u32 blocksize,
+ int mirror_num, struct extent_buffer **eb);
struct extent_buffer *btrfs_find_create_tree_block(struct btrfs_root *root,
u64 bytenr, u32 blocksize);
int clean_tree_block(struct btrfs_trans_handle *trans,
struct btrfs_fs_info *fs_info);
int btrfs_add_log_tree(struct btrfs_trans_handle *trans,
struct btrfs_root *root);
-int btree_lock_page_hook(struct page *page);
-
#ifdef CONFIG_DEBUG_LOCK_ALLOC
void btrfs_init_lockdep(void);
#include <linux/rcupdate.h>
#include <linux/kthread.h>
#include <linux/slab.h>
+#include <linux/ratelimit.h>
#include "compat.h"
#include "hash.h"
#include "ctree.h"
CHUNK_ALLOC_LIMITED = 2,
};
+/*
+ * Control how reservations are dealt with.
+ *
+ * RESERVE_FREE - freeing a reservation.
+ * RESERVE_ALLOC - allocating space and we need to update bytes_may_use for
+ * ENOSPC accounting
+ * RESERVE_ALLOC_NO_ACCOUNT - allocating space and we should not update
+ * bytes_may_use as the ENOSPC accounting is done elsewhere
+ */
+enum {
+ RESERVE_FREE = 0,
+ RESERVE_ALLOC = 1,
+ RESERVE_ALLOC_NO_ACCOUNT = 2,
+};
+
static int update_block_group(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
u64 bytenr, u64 num_bytes, int alloc);
struct btrfs_key *key);
static void dump_space_info(struct btrfs_space_info *info, u64 bytes,
int dump_block_groups);
+static int btrfs_update_reserved_bytes(struct btrfs_block_group_cache *cache,
+ u64 num_bytes, int reserve);
static noinline int
block_group_cache_done(struct btrfs_block_group_cache *cache)
if (atomic_dec_and_test(&cache->count)) {
WARN_ON(cache->pinned > 0);
WARN_ON(cache->reserved > 0);
- WARN_ON(cache->reserved_pinned > 0);
kfree(cache->free_space_ctl);
kfree(cache);
}
* we likely hold important locks.
*/
if (trans && (!trans->transaction->in_commit) &&
- (root && root != root->fs_info->tree_root)) {
+ (root && root != root->fs_info->tree_root) &&
+ btrfs_test_opt(root, SPACE_CACHE)) {
spin_lock(&cache->lock);
if (cache->cached != BTRFS_CACHE_NO) {
spin_unlock(&cache->lock);
{
int ret;
u64 discarded_bytes = 0;
- struct btrfs_multi_bio *multi = NULL;
+ struct btrfs_bio *bbio = NULL;
/* Tell the block device(s) that the sectors can be discarded */
ret = btrfs_map_block(&root->fs_info->mapping_tree, REQ_DISCARD,
- bytenr, &num_bytes, &multi, 0);
+ bytenr, &num_bytes, &bbio, 0);
if (!ret) {
- struct btrfs_bio_stripe *stripe = multi->stripes;
+ struct btrfs_bio_stripe *stripe = bbio->stripes;
int i;
- for (i = 0; i < multi->num_stripes; i++, stripe++) {
+ for (i = 0; i < bbio->num_stripes; i++, stripe++) {
if (!stripe->dev->can_discard)
continue;
*/
ret = 0;
}
- kfree(multi);
+ kfree(bbio);
}
if (actual_bytes)
goto again;
}
+ /* We've already setup this transaction, go ahead and exit */
+ if (block_group->cache_generation == trans->transid &&
+ i_size_read(inode)) {
+ dcs = BTRFS_DC_SETUP;
+ goto out_put;
+ }
+
/*
* We want to set the generation to 0, that way if anything goes wrong
* from here on out we know not to trust this cache when we load up next
if (!ret)
dcs = BTRFS_DC_SETUP;
btrfs_free_reserved_data_space(inode, num_pages);
+
out_put:
iput(inode);
out_free:
btrfs_release_path(path);
out:
spin_lock(&block_group->lock);
+ if (!ret)
+ block_group->cache_generation = trans->transid;
block_group->disk_cache_state = dcs;
spin_unlock(&block_group->lock);
return -ENOSPC;
}
data_sinfo->bytes_may_use += bytes;
- BTRFS_I(inode)->reserved_bytes += bytes;
spin_unlock(&data_sinfo->lock);
return 0;
}
/*
- * called when we are clearing an delalloc extent from the
- * inode's io_tree or there was an error for whatever reason
- * after calling btrfs_check_data_free_space
+ * Called if we need to clear a data reservation for this inode.
*/
void btrfs_free_reserved_data_space(struct inode *inode, u64 bytes)
{
data_sinfo = BTRFS_I(inode)->space_info;
spin_lock(&data_sinfo->lock);
data_sinfo->bytes_may_use -= bytes;
- BTRFS_I(inode)->reserved_bytes -= bytes;
spin_unlock(&data_sinfo->lock);
}
struct btrfs_space_info *sinfo, u64 alloc_bytes,
int force)
{
+ struct btrfs_block_rsv *global_rsv = &root->fs_info->global_block_rsv;
u64 num_bytes = sinfo->total_bytes - sinfo->bytes_readonly;
u64 num_allocated = sinfo->bytes_used + sinfo->bytes_reserved;
u64 thresh;
if (force == CHUNK_ALLOC_FORCE)
return 1;
+ /*
+ * We need to take into account the global rsv because for all intents
+ * and purposes it's used space. Don't worry about locking the
+ * global_rsv, it doesn't change except when the transaction commits.
+ */
+ num_allocated += global_rsv->size;
+
/*
* in limited mode, we want to have some free space up to
* about 1% of the FS size.
*/
if (force == CHUNK_ALLOC_LIMITED) {
- thresh = btrfs_super_total_bytes(&root->fs_info->super_copy);
+ thresh = btrfs_super_total_bytes(root->fs_info->super_copy);
thresh = max_t(u64, 64 * 1024 * 1024,
div_factor_fine(thresh, 1));
if (num_allocated + alloc_bytes < div_factor(num_bytes, 8))
return 0;
- thresh = btrfs_super_total_bytes(&root->fs_info->super_copy);
+ thresh = btrfs_super_total_bytes(root->fs_info->super_copy);
/* 256MB or 5% of the FS */
thresh = max_t(u64, 256 * 1024 * 1024, div_factor_fine(thresh, 5));
/*
* shrink metadata reservation for delalloc
*/
-static int shrink_delalloc(struct btrfs_trans_handle *trans,
- struct btrfs_root *root, u64 to_reclaim, int sync)
+static int shrink_delalloc(struct btrfs_root *root, u64 to_reclaim,
+ bool wait_ordered)
{
struct btrfs_block_rsv *block_rsv;
struct btrfs_space_info *space_info;
+ struct btrfs_trans_handle *trans;
u64 reserved;
u64 max_reclaim;
u64 reclaimed = 0;
long time_left;
- int nr_pages = (2 * 1024 * 1024) >> PAGE_CACHE_SHIFT;
+ unsigned long nr_pages = (2 * 1024 * 1024) >> PAGE_CACHE_SHIFT;
int loops = 0;
unsigned long progress;
+ trans = (struct btrfs_trans_handle *)current->journal_info;
block_rsv = &root->fs_info->delalloc_block_rsv;
space_info = block_rsv->space_info;
smp_mb();
- reserved = space_info->bytes_reserved;
+ reserved = space_info->bytes_may_use;
progress = space_info->reservation_progress;
if (reserved == 0)
}
max_reclaim = min(reserved, to_reclaim);
-
+ nr_pages = max_t(unsigned long, nr_pages,
+ max_reclaim >> PAGE_CACHE_SHIFT);
while (loops < 1024) {
/* have the flusher threads jump in and do some IO */
smp_mb();
nr_pages = min_t(unsigned long, nr_pages,
root->fs_info->delalloc_bytes >> PAGE_CACHE_SHIFT);
- writeback_inodes_sb_nr_if_idle(root->fs_info->sb, nr_pages);
+ writeback_inodes_sb_nr_if_idle(root->fs_info->sb, nr_pages,
+ WB_REASON_FS_FREE_SPACE);
spin_lock(&space_info->lock);
- if (reserved > space_info->bytes_reserved)
- reclaimed += reserved - space_info->bytes_reserved;
- reserved = space_info->bytes_reserved;
+ if (reserved > space_info->bytes_may_use)
+ reclaimed += reserved - space_info->bytes_may_use;
+ reserved = space_info->bytes_may_use;
spin_unlock(&space_info->lock);
loops++;
if (trans && trans->transaction->blocked)
return -EAGAIN;
- time_left = schedule_timeout_interruptible(1);
+ if (wait_ordered && !trans) {
+ btrfs_wait_ordered_extents(root, 0, 0);
+ } else {
+ time_left = schedule_timeout_interruptible(1);
- /* We were interrupted, exit */
- if (time_left)
- break;
+ /* We were interrupted, exit */
+ if (time_left)
+ break;
+ }
/* we've kicked the IO a few times, if anything has been freed,
* exit. There is no sense in looping here for a long time
}
}
- if (reclaimed >= to_reclaim && !trans)
- btrfs_wait_ordered_extents(root, 0, 0);
+
return reclaimed >= to_reclaim;
}
-/*
- * Retries tells us how many times we've called reserve_metadata_bytes. The
- * idea is if this is the first call (retries == 0) then we will add to our
- * reserved count if we can't make the allocation in order to hold our place
- * while we go and try and free up space. That way for retries > 1 we don't try
- * and add space, we just check to see if the amount of unused space is >= the
- * total space, meaning that our reservation is valid.
+/**
+ * maybe_commit_transaction - possibly commit the transaction if its ok to
+ * @root - the root we're allocating for
+ * @bytes - the number of bytes we want to reserve
+ * @force - force the commit
*
- * However if we don't intend to retry this reservation, pass -1 as retries so
- * that it short circuits this logic.
+ * This will check to make sure that committing the transaction will actually
+ * get us somewhere and then commit the transaction if it does. Otherwise it
+ * will return -ENOSPC.
*/
-static int reserve_metadata_bytes(struct btrfs_trans_handle *trans,
- struct btrfs_root *root,
+static int may_commit_transaction(struct btrfs_root *root,
+ struct btrfs_space_info *space_info,
+ u64 bytes, int force)
+{
+ struct btrfs_block_rsv *delayed_rsv = &root->fs_info->delayed_block_rsv;
+ struct btrfs_trans_handle *trans;
+
+ trans = (struct btrfs_trans_handle *)current->journal_info;
+ if (trans)
+ return -EAGAIN;
+
+ if (force)
+ goto commit;
+
+ /* See if there is enough pinned space to make this reservation */
+ spin_lock(&space_info->lock);
+ if (space_info->bytes_pinned >= bytes) {
+ spin_unlock(&space_info->lock);
+ goto commit;
+ }
+ spin_unlock(&space_info->lock);
+
+ /*
+ * See if there is some space in the delayed insertion reservation for
+ * this reservation.
+ */
+ if (space_info != delayed_rsv->space_info)
+ return -ENOSPC;
+
+ spin_lock(&delayed_rsv->lock);
+ if (delayed_rsv->size < bytes) {
+ spin_unlock(&delayed_rsv->lock);
+ return -ENOSPC;
+ }
+ spin_unlock(&delayed_rsv->lock);
+
+commit:
+ trans = btrfs_join_transaction(root);
+ if (IS_ERR(trans))
+ return -ENOSPC;
+
+ return btrfs_commit_transaction(trans, root);
+}
+
+/**
+ * reserve_metadata_bytes - try to reserve bytes from the block_rsv's space
+ * @root - the root we're allocating for
+ * @block_rsv - the block_rsv we're allocating for
+ * @orig_bytes - the number of bytes we want
+ * @flush - wether or not we can flush to make our reservation
+ *
+ * This will reserve orgi_bytes number of bytes from the space info associated
+ * with the block_rsv. If there is not enough space it will make an attempt to
+ * flush out space to make room. It will do this by flushing delalloc if
+ * possible or committing the transaction. If flush is 0 then no attempts to
+ * regain reservations will be made and this will fail if there is not enough
+ * space already.
+ */
+static int reserve_metadata_bytes(struct btrfs_root *root,
struct btrfs_block_rsv *block_rsv,
u64 orig_bytes, int flush)
{
struct btrfs_space_info *space_info = block_rsv->space_info;
- u64 unused;
+ u64 used;
u64 num_bytes = orig_bytes;
int retries = 0;
int ret = 0;
bool committed = false;
bool flushing = false;
+ bool wait_ordered = false;
again:
ret = 0;
* deadlock since we are waiting for the flusher to finish, but
* hold the current transaction open.
*/
- if (trans)
+ if (current->journal_info)
return -EAGAIN;
ret = wait_event_interruptible(space_info->wait,
!space_info->flush);
}
ret = -ENOSPC;
- unused = space_info->bytes_used + space_info->bytes_reserved +
- space_info->bytes_pinned + space_info->bytes_readonly +
- space_info->bytes_may_use;
+ used = space_info->bytes_used + space_info->bytes_reserved +
+ space_info->bytes_pinned + space_info->bytes_readonly +
+ space_info->bytes_may_use;
/*
* The idea here is that we've not already over-reserved the block group
* lets start flushing stuff first and then come back and try to make
* our reservation.
*/
- if (unused <= space_info->total_bytes) {
- unused = space_info->total_bytes - unused;
- if (unused >= num_bytes) {
- space_info->bytes_reserved += orig_bytes;
+ if (used <= space_info->total_bytes) {
+ if (used + orig_bytes <= space_info->total_bytes) {
+ space_info->bytes_may_use += orig_bytes;
ret = 0;
} else {
/*
* amount plus the amount of bytes that we need for this
* reservation.
*/
- num_bytes = unused - space_info->total_bytes +
+ wait_ordered = true;
+ num_bytes = used - space_info->total_bytes +
(orig_bytes * (retries + 1));
}
+ if (ret) {
+ u64 profile = btrfs_get_alloc_profile(root, 0);
+ u64 avail;
+
+ /*
+ * If we have a lot of space that's pinned, don't bother doing
+ * the overcommit dance yet and just commit the transaction.
+ */
+ avail = (space_info->total_bytes - space_info->bytes_used) * 8;
+ do_div(avail, 10);
+ if (space_info->bytes_pinned >= avail && flush && !committed) {
+ space_info->flush = 1;
+ flushing = true;
+ spin_unlock(&space_info->lock);
+ ret = may_commit_transaction(root, space_info,
+ orig_bytes, 1);
+ if (ret)
+ goto out;
+ committed = true;
+ goto again;
+ }
+
+ spin_lock(&root->fs_info->free_chunk_lock);
+ avail = root->fs_info->free_chunk_space;
+
+ /*
+ * If we have dup, raid1 or raid10 then only half of the free
+ * space is actually useable.
+ */
+ if (profile & (BTRFS_BLOCK_GROUP_DUP |
+ BTRFS_BLOCK_GROUP_RAID1 |
+ BTRFS_BLOCK_GROUP_RAID10))
+ avail >>= 1;
+
+ /*
+ * If we aren't flushing don't let us overcommit too much, say
+ * 1/8th of the space. If we can flush, let it overcommit up to
+ * 1/2 of the space.
+ */
+ if (flush)
+ avail >>= 3;
+ else
+ avail >>= 1;
+ spin_unlock(&root->fs_info->free_chunk_lock);
+
+ if (used + num_bytes < space_info->total_bytes + avail) {
+ space_info->bytes_may_use += orig_bytes;
+ ret = 0;
+ } else {
+ wait_ordered = true;
+ }
+ }
+
/*
* Couldn't make our reservation, save our place so while we're trying
* to reclaim space we can actually use it instead of somebody else
* We do synchronous shrinking since we don't actually unreserve
* metadata until after the IO is completed.
*/
- ret = shrink_delalloc(trans, root, num_bytes, 1);
+ ret = shrink_delalloc(root, num_bytes, wait_ordered);
if (ret < 0)
goto out;
* so go back around and try again.
*/
if (retries < 2) {
+ wait_ordered = true;
retries++;
goto again;
}
- /*
- * Not enough space to be reclaimed, don't bother committing the
- * transaction.
- */
- spin_lock(&space_info->lock);
- if (space_info->bytes_pinned < orig_bytes)
- ret = -ENOSPC;
- spin_unlock(&space_info->lock);
- if (ret)
- goto out;
-
- ret = -EAGAIN;
- if (trans)
- goto out;
-
ret = -ENOSPC;
if (committed)
goto out;
- trans = btrfs_join_transaction(root);
- if (IS_ERR(trans))
- goto out;
- ret = btrfs_commit_transaction(trans, root);
+ ret = may_commit_transaction(root, space_info, orig_bytes, 0);
if (!ret) {
- trans = NULL;
committed = true;
goto again;
}
static struct btrfs_block_rsv *get_block_rsv(struct btrfs_trans_handle *trans,
struct btrfs_root *root)
{
- struct btrfs_block_rsv *block_rsv;
- if (root->ref_cows)
+ struct btrfs_block_rsv *block_rsv = NULL;
+
+ if (root->ref_cows || root == root->fs_info->csum_root)
block_rsv = trans->block_rsv;
- else
+
+ if (!block_rsv)
block_rsv = root->block_rsv;
if (!block_rsv)
}
if (num_bytes) {
spin_lock(&space_info->lock);
- space_info->bytes_reserved -= num_bytes;
+ space_info->bytes_may_use -= num_bytes;
space_info->reservation_progress++;
spin_unlock(&space_info->lock);
}
{
memset(rsv, 0, sizeof(*rsv));
spin_lock_init(&rsv->lock);
- atomic_set(&rsv->usage, 1);
- rsv->priority = 6;
- INIT_LIST_HEAD(&rsv->list);
}
struct btrfs_block_rsv *btrfs_alloc_block_rsv(struct btrfs_root *root)
void btrfs_free_block_rsv(struct btrfs_root *root,
struct btrfs_block_rsv *rsv)
{
- if (rsv && atomic_dec_and_test(&rsv->usage)) {
- btrfs_block_rsv_release(root, rsv, (u64)-1);
- if (!rsv->durable)
- kfree(rsv);
- }
-}
-
-/*
- * make the block_rsv struct be able to capture freed space.
- * the captured space will re-add to the the block_rsv struct
- * after transaction commit
- */
-void btrfs_add_durable_block_rsv(struct btrfs_fs_info *fs_info,
- struct btrfs_block_rsv *block_rsv)
-{
- block_rsv->durable = 1;
- mutex_lock(&fs_info->durable_block_rsv_mutex);
- list_add_tail(&block_rsv->list, &fs_info->durable_block_rsv_list);
- mutex_unlock(&fs_info->durable_block_rsv_mutex);
+ btrfs_block_rsv_release(root, rsv, (u64)-1);
+ kfree(rsv);
}
-int btrfs_block_rsv_add(struct btrfs_trans_handle *trans,
- struct btrfs_root *root,
- struct btrfs_block_rsv *block_rsv,
- u64 num_bytes)
+static inline int __block_rsv_add(struct btrfs_root *root,
+ struct btrfs_block_rsv *block_rsv,
+ u64 num_bytes, int flush)
{
int ret;
if (num_bytes == 0)
return 0;
- ret = reserve_metadata_bytes(trans, root, block_rsv, num_bytes, 1);
+ ret = reserve_metadata_bytes(root, block_rsv, num_bytes, flush);
if (!ret) {
block_rsv_add_bytes(block_rsv, num_bytes, 1);
return 0;
return ret;
}
-int btrfs_block_rsv_check(struct btrfs_trans_handle *trans,
- struct btrfs_root *root,
- struct btrfs_block_rsv *block_rsv,
- u64 min_reserved, int min_factor)
+int btrfs_block_rsv_add(struct btrfs_root *root,
+ struct btrfs_block_rsv *block_rsv,
+ u64 num_bytes)
+{
+ return __block_rsv_add(root, block_rsv, num_bytes, 1);
+}
+
+int btrfs_block_rsv_add_noflush(struct btrfs_root *root,
+ struct btrfs_block_rsv *block_rsv,
+ u64 num_bytes)
+{
+ return __block_rsv_add(root, block_rsv, num_bytes, 0);
+}
+
+int btrfs_block_rsv_check(struct btrfs_root *root,
+ struct btrfs_block_rsv *block_rsv, int min_factor)
{
u64 num_bytes = 0;
- int commit_trans = 0;
int ret = -ENOSPC;
if (!block_rsv)
return 0;
spin_lock(&block_rsv->lock);
- if (min_factor > 0)
- num_bytes = div_factor(block_rsv->size, min_factor);
- if (min_reserved > num_bytes)
- num_bytes = min_reserved;
+ num_bytes = div_factor(block_rsv->size, min_factor);
+ if (block_rsv->reserved >= num_bytes)
+ ret = 0;
+ spin_unlock(&block_rsv->lock);
- if (block_rsv->reserved >= num_bytes) {
+ return ret;
+}
+
+int btrfs_block_rsv_refill(struct btrfs_root *root,
+ struct btrfs_block_rsv *block_rsv,
+ u64 min_reserved)
+{
+ u64 num_bytes = 0;
+ int ret = -ENOSPC;
+
+ if (!block_rsv)
+ return 0;
+
+ spin_lock(&block_rsv->lock);
+ num_bytes = min_reserved;
+ if (block_rsv->reserved >= num_bytes)
ret = 0;
- } else {
+ else
num_bytes -= block_rsv->reserved;
- if (block_rsv->durable &&
- block_rsv->freed[0] + block_rsv->freed[1] >= num_bytes)
- commit_trans = 1;
- }
spin_unlock(&block_rsv->lock);
+
if (!ret)
return 0;
- if (block_rsv->refill_used) {
- ret = reserve_metadata_bytes(trans, root, block_rsv,
- num_bytes, 0);
- if (!ret) {
- block_rsv_add_bytes(block_rsv, num_bytes, 0);
- return 0;
- }
- }
-
- if (commit_trans) {
- if (trans)
- return -EAGAIN;
- trans = btrfs_join_transaction(root);
- BUG_ON(IS_ERR(trans));
- ret = btrfs_commit_transaction(trans, root);
+ ret = reserve_metadata_bytes(root, block_rsv, num_bytes, 1);
+ if (!ret) {
+ block_rsv_add_bytes(block_rsv, num_bytes, 0);
return 0;
}
- return -ENOSPC;
+ return ret;
}
int btrfs_block_rsv_migrate(struct btrfs_block_rsv *src_rsv,
u64 num_bytes;
u64 meta_used;
u64 data_used;
- int csum_size = btrfs_super_csum_size(&fs_info->super_copy);
+ int csum_size = btrfs_super_csum_size(fs_info->super_copy);
sinfo = __find_space_info(fs_info, BTRFS_BLOCK_GROUP_DATA);
spin_lock(&sinfo->lock);
if (sinfo->total_bytes > num_bytes) {
num_bytes = sinfo->total_bytes - num_bytes;
block_rsv->reserved += num_bytes;
- sinfo->bytes_reserved += num_bytes;
+ sinfo->bytes_may_use += num_bytes;
}
if (block_rsv->reserved >= block_rsv->size) {
num_bytes = block_rsv->reserved - block_rsv->size;
- sinfo->bytes_reserved -= num_bytes;
+ sinfo->bytes_may_use -= num_bytes;
sinfo->reservation_progress++;
block_rsv->reserved = block_rsv->size;
block_rsv->full = 1;
space_info = __find_space_info(fs_info, BTRFS_BLOCK_GROUP_SYSTEM);
fs_info->chunk_block_rsv.space_info = space_info;
- fs_info->chunk_block_rsv.priority = 10;
space_info = __find_space_info(fs_info, BTRFS_BLOCK_GROUP_METADATA);
fs_info->global_block_rsv.space_info = space_info;
- fs_info->global_block_rsv.priority = 10;
- fs_info->global_block_rsv.refill_used = 1;
fs_info->delalloc_block_rsv.space_info = space_info;
fs_info->trans_block_rsv.space_info = space_info;
fs_info->empty_block_rsv.space_info = space_info;
- fs_info->empty_block_rsv.priority = 10;
+ fs_info->delayed_block_rsv.space_info = space_info;
fs_info->extent_root->block_rsv = &fs_info->global_block_rsv;
fs_info->csum_root->block_rsv = &fs_info->global_block_rsv;
fs_info->tree_root->block_rsv = &fs_info->global_block_rsv;
fs_info->chunk_root->block_rsv = &fs_info->chunk_block_rsv;
- btrfs_add_durable_block_rsv(fs_info, &fs_info->global_block_rsv);
-
- btrfs_add_durable_block_rsv(fs_info, &fs_info->delalloc_block_rsv);
-
update_global_block_rsv(fs_info);
}
WARN_ON(fs_info->trans_block_rsv.reserved > 0);
WARN_ON(fs_info->chunk_block_rsv.size > 0);
WARN_ON(fs_info->chunk_block_rsv.reserved > 0);
-}
-
-int btrfs_truncate_reserve_metadata(struct btrfs_trans_handle *trans,
- struct btrfs_root *root,
- struct btrfs_block_rsv *rsv)
-{
- struct btrfs_block_rsv *trans_rsv = &root->fs_info->trans_block_rsv;
- u64 num_bytes;
- int ret;
-
- /*
- * Truncate should be freeing data, but give us 2 items just in case it
- * needs to use some space. We may want to be smarter about this in the
- * future.
- */
- num_bytes = btrfs_calc_trans_metadata_size(root, 2);
-
- /* We already have enough bytes, just return */
- if (rsv->reserved >= num_bytes)
- return 0;
-
- num_bytes -= rsv->reserved;
-
- /*
- * You should have reserved enough space before hand to do this, so this
- * should not fail.
- */
- ret = block_rsv_migrate_bytes(trans_rsv, rsv, num_bytes);
- BUG_ON(ret);
-
- return 0;
+ WARN_ON(fs_info->delayed_block_rsv.size > 0);
+ WARN_ON(fs_info->delayed_block_rsv.reserved > 0);
}
void btrfs_trans_release_metadata(struct btrfs_trans_handle *trans,
if (!trans->bytes_reserved)
return;
- BUG_ON(trans->block_rsv != &root->fs_info->trans_block_rsv);
- btrfs_block_rsv_release(root, trans->block_rsv,
- trans->bytes_reserved);
+ btrfs_block_rsv_release(root, trans->block_rsv, trans->bytes_reserved);
trans->bytes_reserved = 0;
}
return block_rsv_migrate_bytes(src_rsv, dst_rsv, num_bytes);
}
+/**
+ * drop_outstanding_extent - drop an outstanding extent
+ * @inode: the inode we're dropping the extent for
+ *
+ * This is called when we are freeing up an outstanding extent, either called
+ * after an error or after an extent is written. This will return the number of
+ * reserved extents that need to be freed. This must be called with
+ * BTRFS_I(inode)->lock held.
+ */
static unsigned drop_outstanding_extent(struct inode *inode)
{
+ unsigned drop_inode_space = 0;
unsigned dropped_extents = 0;
- spin_lock(&BTRFS_I(inode)->lock);
BUG_ON(!BTRFS_I(inode)->outstanding_extents);
BTRFS_I(inode)->outstanding_extents--;
+ if (BTRFS_I(inode)->outstanding_extents == 0 &&
+ BTRFS_I(inode)->delalloc_meta_reserved) {
+ drop_inode_space = 1;
+ BTRFS_I(inode)->delalloc_meta_reserved = 0;
+ }
+
/*
* If we have more or the same amount of outsanding extents than we have
* reserved then we need to leave the reserved extents count alone.
*/
if (BTRFS_I(inode)->outstanding_extents >=
BTRFS_I(inode)->reserved_extents)
- goto out;
+ return drop_inode_space;
dropped_extents = BTRFS_I(inode)->reserved_extents -
BTRFS_I(inode)->outstanding_extents;
BTRFS_I(inode)->reserved_extents -= dropped_extents;
-out:
- spin_unlock(&BTRFS_I(inode)->lock);
- return dropped_extents;
+ return dropped_extents + drop_inode_space;
}
-static u64 calc_csum_metadata_size(struct inode *inode, u64 num_bytes)
+/**
+ * calc_csum_metadata_size - return the amount of metada space that must be
+ * reserved/free'd for the given bytes.
+ * @inode: the inode we're manipulating
+ * @num_bytes: the number of bytes in question
+ * @reserve: 1 if we are reserving space, 0 if we are freeing space
+ *
+ * This adjusts the number of csum_bytes in the inode and then returns the
+ * correct amount of metadata that must either be reserved or freed. We
+ * calculate how many checksums we can fit into one leaf and then divide the
+ * number of bytes that will need to be checksumed by this value to figure out
+ * how many checksums will be required. If we are adding bytes then the number
+ * may go up and we will return the number of additional bytes that must be
+ * reserved. If it is going down we will return the number of bytes that must
+ * be freed.
+ *
+ * This must be called with BTRFS_I(inode)->lock held.
+ */
+static u64 calc_csum_metadata_size(struct inode *inode, u64 num_bytes,
+ int reserve)
{
- return num_bytes >>= 3;
+ struct btrfs_root *root = BTRFS_I(inode)->root;
+ u64 csum_size;
+ int num_csums_per_leaf;
+ int num_csums;
+ int old_csums;
+
+ if (BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM &&
+ BTRFS_I(inode)->csum_bytes == 0)
+ return 0;
+
+ old_csums = (int)div64_u64(BTRFS_I(inode)->csum_bytes, root->sectorsize);
+ if (reserve)
+ BTRFS_I(inode)->csum_bytes += num_bytes;
+ else
+ BTRFS_I(inode)->csum_bytes -= num_bytes;
+ csum_size = BTRFS_LEAF_DATA_SIZE(root) - sizeof(struct btrfs_item);
+ num_csums_per_leaf = (int)div64_u64(csum_size,
+ sizeof(struct btrfs_csum_item) +
+ sizeof(struct btrfs_disk_key));
+ num_csums = (int)div64_u64(BTRFS_I(inode)->csum_bytes, root->sectorsize);
+ num_csums = num_csums + num_csums_per_leaf - 1;
+ num_csums = num_csums / num_csums_per_leaf;
+
+ old_csums = old_csums + num_csums_per_leaf - 1;
+ old_csums = old_csums / num_csums_per_leaf;
+
+ /* No change, no need to reserve more */
+ if (old_csums == num_csums)
+ return 0;
+
+ if (reserve)
+ return btrfs_calc_trans_metadata_size(root,
+ num_csums - old_csums);
+
+ return btrfs_calc_trans_metadata_size(root, old_csums - num_csums);
}
int btrfs_delalloc_reserve_metadata(struct inode *inode, u64 num_bytes)
struct btrfs_block_rsv *block_rsv = &root->fs_info->delalloc_block_rsv;
u64 to_reserve = 0;
unsigned nr_extents = 0;
+ int flush = 1;
int ret;
- if (btrfs_transaction_in_commit(root->fs_info))
+ if (btrfs_is_free_space_inode(root, inode))
+ flush = 0;
+
+ if (flush && btrfs_transaction_in_commit(root->fs_info))
schedule_timeout(1);
num_bytes = ALIGN(num_bytes, root->sectorsize);
nr_extents = BTRFS_I(inode)->outstanding_extents -
BTRFS_I(inode)->reserved_extents;
BTRFS_I(inode)->reserved_extents += nr_extents;
+ }
- to_reserve = btrfs_calc_trans_metadata_size(root, nr_extents);
+ /*
+ * Add an item to reserve for updating the inode when we complete the
+ * delalloc io.
+ */
+ if (!BTRFS_I(inode)->delalloc_meta_reserved) {
+ nr_extents++;
+ BTRFS_I(inode)->delalloc_meta_reserved = 1;
}
+
+ to_reserve = btrfs_calc_trans_metadata_size(root, nr_extents);
+ to_reserve += calc_csum_metadata_size(inode, num_bytes, 1);
spin_unlock(&BTRFS_I(inode)->lock);
- to_reserve += calc_csum_metadata_size(inode, num_bytes);
- ret = reserve_metadata_bytes(NULL, root, block_rsv, to_reserve, 1);
+ ret = reserve_metadata_bytes(root, block_rsv, to_reserve, flush);
if (ret) {
+ u64 to_free = 0;
unsigned dropped;
+
+ spin_lock(&BTRFS_I(inode)->lock);
+ dropped = drop_outstanding_extent(inode);
+ to_free = calc_csum_metadata_size(inode, num_bytes, 0);
+ spin_unlock(&BTRFS_I(inode)->lock);
+ to_free += btrfs_calc_trans_metadata_size(root, dropped);
+
/*
- * We don't need the return value since our reservation failed,
- * we just need to clean up our counter.
+ * Somebody could have come in and twiddled with the
+ * reservation, so if we have to free more than we would have
+ * reserved from this reservation go ahead and release those
+ * bytes.
*/
- dropped = drop_outstanding_extent(inode);
- WARN_ON(dropped > 1);
+ to_free -= to_reserve;
+ if (to_free)
+ btrfs_block_rsv_release(root, block_rsv, to_free);
return ret;
}
return 0;
}
+/**
+ * btrfs_delalloc_release_metadata - release a metadata reservation for an inode
+ * @inode: the inode to release the reservation for
+ * @num_bytes: the number of bytes we're releasing
+ *
+ * This will release the metadata reservation for an inode. This can be called
+ * once we complete IO for a given set of bytes to release their metadata
+ * reservations.
+ */
void btrfs_delalloc_release_metadata(struct inode *inode, u64 num_bytes)
{
struct btrfs_root *root = BTRFS_I(inode)->root;
unsigned dropped;
num_bytes = ALIGN(num_bytes, root->sectorsize);
+ spin_lock(&BTRFS_I(inode)->lock);
dropped = drop_outstanding_extent(inode);
- to_free = calc_csum_metadata_size(inode, num_bytes);
+ to_free = calc_csum_metadata_size(inode, num_bytes, 0);
+ spin_unlock(&BTRFS_I(inode)->lock);
if (dropped > 0)
to_free += btrfs_calc_trans_metadata_size(root, dropped);
to_free);
}
+/**
+ * btrfs_delalloc_reserve_space - reserve data and metadata space for delalloc
+ * @inode: inode we're writing to
+ * @num_bytes: the number of bytes we want to allocate
+ *
+ * This will do the following things
+ *
+ * o reserve space in the data space info for num_bytes
+ * o reserve space in the metadata space info based on number of outstanding
+ * extents and how much csums will be needed
+ * o add to the inodes ->delalloc_bytes
+ * o add it to the fs_info's delalloc inodes list.
+ *
+ * This will return 0 for success and -ENOSPC if there is no space left.
+ */
int btrfs_delalloc_reserve_space(struct inode *inode, u64 num_bytes)
{
int ret;
return 0;
}
+/**
+ * btrfs_delalloc_release_space - release data and metadata space for delalloc
+ * @inode: inode we're releasing space for
+ * @num_bytes: the number of bytes we want to free up
+ *
+ * This must be matched with a call to btrfs_delalloc_reserve_space. This is
+ * called in the case that we don't need the metadata AND data reservations
+ * anymore. So if there is an error or we insert an inline extent.
+ *
+ * This function will release the metadata space that was not used and will
+ * decrement ->delalloc_bytes and remove it from the fs_info delalloc_inodes
+ * list if there are no delalloc bytes left.
+ */
void btrfs_delalloc_release_space(struct inode *inode, u64 num_bytes)
{
btrfs_delalloc_release_metadata(inode, num_bytes);
/* block accounting for super block */
spin_lock(&info->delalloc_lock);
- old_val = btrfs_super_bytes_used(&info->super_copy);
+ old_val = btrfs_super_bytes_used(info->super_copy);
if (alloc)
old_val += num_bytes;
else
old_val -= num_bytes;
- btrfs_set_super_bytes_used(&info->super_copy, old_val);
+ btrfs_set_super_bytes_used(info->super_copy, old_val);
spin_unlock(&info->delalloc_lock);
while (total) {
spin_lock(&cache->space_info->lock);
spin_lock(&cache->lock);
- if (btrfs_super_cache_generation(&info->super_copy) != 0 &&
+ if (btrfs_test_opt(root, SPACE_CACHE) &&
cache->disk_cache_state < BTRFS_DC_CLEAR)
cache->disk_cache_state = BTRFS_DC_CLEAR;
btrfs_set_block_group_used(&cache->item, old_val);
cache->reserved -= num_bytes;
cache->space_info->bytes_reserved -= num_bytes;
- cache->space_info->reservation_progress++;
cache->space_info->bytes_used += num_bytes;
cache->space_info->disk_used += num_bytes * factor;
spin_unlock(&cache->lock);
if (reserved) {
cache->reserved -= num_bytes;
cache->space_info->bytes_reserved -= num_bytes;
- cache->space_info->reservation_progress++;
}
spin_unlock(&cache->lock);
spin_unlock(&cache->space_info->lock);
}
/*
- * update size of reserved extents. this function may return -EAGAIN
- * if 'reserve' is true or 'sinfo' is false.
+ * this function must be called within transaction
+ */
+int btrfs_pin_extent_for_log_replay(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ u64 bytenr, u64 num_bytes)
+{
+ struct btrfs_block_group_cache *cache;
+
+ cache = btrfs_lookup_block_group(root->fs_info, bytenr);
+ BUG_ON(!cache);
+
+ /*
+ * pull in the free space cache (if any) so that our pin
+ * removes the free space from the cache. We have load_only set
+ * to one because the slow code to read in the free extents does check
+ * the pinned extents.
+ */
+ cache_block_group(cache, trans, root, 1);
+
+ pin_down_extent(root, cache, bytenr, num_bytes, 0);
+
+ /* remove us from the free space cache (if we're there at all) */
+ btrfs_remove_free_space(cache, bytenr, num_bytes);
+ btrfs_put_block_group(cache);
+ return 0;
+}
+
+/**
+ * btrfs_update_reserved_bytes - update the block_group and space info counters
+ * @cache: The cache we are manipulating
+ * @num_bytes: The number of bytes in question
+ * @reserve: One of the reservation enums
+ *
+ * This is called by the allocator when it reserves space, or by somebody who is
+ * freeing space that was never actually used on disk. For example if you
+ * reserve some space for a new leaf in transaction A and before transaction A
+ * commits you free that leaf, you call this with reserve set to 0 in order to
+ * clear the reservation.
+ *
+ * Metadata reservations should be called with RESERVE_ALLOC so we do the proper
+ * ENOSPC accounting. For data we handle the reservation through clearing the
+ * delalloc bits in the io_tree. We have to do this since we could end up
+ * allocating less disk space for the amount of data we have reserved in the
+ * case of compression.
+ *
+ * If this is a reservation and the block group has become read only we cannot
+ * make the reservation and return -EAGAIN, otherwise this function always
+ * succeeds.
*/
-int btrfs_update_reserved_bytes(struct btrfs_block_group_cache *cache,
- u64 num_bytes, int reserve, int sinfo)
+static int btrfs_update_reserved_bytes(struct btrfs_block_group_cache *cache,
+ u64 num_bytes, int reserve)
{
+ struct btrfs_space_info *space_info = cache->space_info;
int ret = 0;
- if (sinfo) {
- struct btrfs_space_info *space_info = cache->space_info;
- spin_lock(&space_info->lock);
- spin_lock(&cache->lock);
- if (reserve) {
- if (cache->ro) {
- ret = -EAGAIN;
- } else {
- cache->reserved += num_bytes;
- space_info->bytes_reserved += num_bytes;
- }
- } else {
- if (cache->ro)
- space_info->bytes_readonly += num_bytes;
- cache->reserved -= num_bytes;
- space_info->bytes_reserved -= num_bytes;
- space_info->reservation_progress++;
- }
- spin_unlock(&cache->lock);
- spin_unlock(&space_info->lock);
- } else {
- spin_lock(&cache->lock);
+ spin_lock(&space_info->lock);
+ spin_lock(&cache->lock);
+ if (reserve != RESERVE_FREE) {
if (cache->ro) {
ret = -EAGAIN;
} else {
- if (reserve)
- cache->reserved += num_bytes;
- else
- cache->reserved -= num_bytes;
+ cache->reserved += num_bytes;
+ space_info->bytes_reserved += num_bytes;
+ if (reserve == RESERVE_ALLOC) {
+ BUG_ON(space_info->bytes_may_use < num_bytes);
+ space_info->bytes_may_use -= num_bytes;
+ }
}
- spin_unlock(&cache->lock);
+ } else {
+ if (cache->ro)
+ space_info->bytes_readonly += num_bytes;
+ cache->reserved -= num_bytes;
+ space_info->bytes_reserved -= num_bytes;
+ space_info->reservation_progress++;
}
+ spin_unlock(&cache->lock);
+ spin_unlock(&space_info->lock);
return ret;
}
spin_lock(&cache->lock);
cache->pinned -= len;
cache->space_info->bytes_pinned -= len;
- if (cache->ro) {
+ if (cache->ro)
cache->space_info->bytes_readonly += len;
- } else if (cache->reserved_pinned > 0) {
- len = min(len, cache->reserved_pinned);
- cache->reserved_pinned -= len;
- cache->space_info->bytes_reserved += len;
- }
spin_unlock(&cache->lock);
spin_unlock(&cache->space_info->lock);
}
{
struct btrfs_fs_info *fs_info = root->fs_info;
struct extent_io_tree *unpin;
- struct btrfs_block_rsv *block_rsv;
- struct btrfs_block_rsv *next_rsv;
u64 start;
u64 end;
- int idx;
int ret;
if (fs_info->pinned_extents == &fs_info->freed_extents[0])
cond_resched();
}
- mutex_lock(&fs_info->durable_block_rsv_mutex);
- list_for_each_entry_safe(block_rsv, next_rsv,
- &fs_info->durable_block_rsv_list, list) {
-
- idx = trans->transid & 0x1;
- if (block_rsv->freed[idx] > 0) {
- block_rsv_add_bytes(block_rsv,
- block_rsv->freed[idx], 0);
- block_rsv->freed[idx] = 0;
- }
- if (atomic_read(&block_rsv->usage) == 0) {
- btrfs_block_rsv_release(root, block_rsv, (u64)-1);
-
- if (block_rsv->freed[0] == 0 &&
- block_rsv->freed[1] == 0) {
- list_del_init(&block_rsv->list);
- kfree(block_rsv);
- }
- } else {
- btrfs_block_rsv_release(root, block_rsv, 0);
- }
- }
- mutex_unlock(&fs_info->durable_block_rsv_mutex);
-
return 0;
}
struct extent_buffer *buf,
u64 parent, int last_ref)
{
- struct btrfs_block_rsv *block_rsv;
struct btrfs_block_group_cache *cache = NULL;
int ret;
if (!last_ref)
return;
- block_rsv = get_block_rsv(trans, root);
cache = btrfs_lookup_block_group(root->fs_info, buf->start);
- if (block_rsv->space_info != cache->space_info)
- goto out;
if (btrfs_header_generation(buf) == trans->transid) {
if (root->root_key.objectid != BTRFS_TREE_LOG_OBJECTID) {
ret = check_ref_cleanup(trans, root, buf->start);
if (!ret)
- goto pin;
+ goto out;
}
if (btrfs_header_flag(buf, BTRFS_HEADER_FLAG_WRITTEN)) {
pin_down_extent(root, cache, buf->start, buf->len, 1);
- goto pin;
+ goto out;
}
WARN_ON(test_bit(EXTENT_BUFFER_DIRTY, &buf->bflags));
btrfs_add_free_space(cache, buf->start, buf->len);
- ret = btrfs_update_reserved_bytes(cache, buf->len, 0, 0);
- if (ret == -EAGAIN) {
- /* block group became read-only */
- btrfs_update_reserved_bytes(cache, buf->len, 0, 1);
- goto out;
- }
-
- ret = 1;
- spin_lock(&block_rsv->lock);
- if (block_rsv->reserved < block_rsv->size) {
- block_rsv->reserved += buf->len;
- ret = 0;
- }
- spin_unlock(&block_rsv->lock);
-
- if (ret) {
- spin_lock(&cache->space_info->lock);
- cache->space_info->bytes_reserved -= buf->len;
- cache->space_info->reservation_progress++;
- spin_unlock(&cache->space_info->lock);
- }
- goto out;
- }
-pin:
- if (block_rsv->durable && !cache->ro) {
- ret = 0;
- spin_lock(&cache->lock);
- if (!cache->ro) {
- cache->reserved_pinned += buf->len;
- ret = 1;
- }
- spin_unlock(&cache->lock);
-
- if (ret) {
- spin_lock(&block_rsv->lock);
- block_rsv->freed[trans->transid & 0x1] += buf->len;
- spin_unlock(&block_rsv->lock);
- }
+ btrfs_update_reserved_bytes(cache, buf->len, RESERVE_FREE);
}
out:
/*
int last_ptr_loop = 0;
int loop = 0;
int index = 0;
+ int alloc_type = (data & BTRFS_BLOCK_GROUP_DATA) ?
+ RESERVE_ALLOC_NO_ACCOUNT : RESERVE_ALLOC;
bool found_uncached_bg = false;
bool failed_cluster_refill = false;
bool failed_alloc = false;
bool use_cluster = true;
+ bool have_caching_bg = false;
u64 ideal_cache_percent = 0;
u64 ideal_cache_offset = 0;
}
}
search:
+ have_caching_bg = false;
down_read(&space_info->groups_sem);
list_for_each_entry(block_group, &space_info->block_groups[index],
list) {
failed_alloc = true;
goto have_block_group;
} else if (!offset) {
+ if (!cached)
+ have_caching_bg = true;
goto loop;
}
checks:
search_start - offset);
BUG_ON(offset > search_start);
- ret = btrfs_update_reserved_bytes(block_group, num_bytes, 1,
- (data & BTRFS_BLOCK_GROUP_DATA));
+ ret = btrfs_update_reserved_bytes(block_group, num_bytes,
+ alloc_type);
if (ret == -EAGAIN) {
btrfs_add_free_space(block_group, offset, num_bytes);
goto loop;
}
up_read(&space_info->groups_sem);
+ if (!ins->objectid && loop >= LOOP_CACHING_WAIT && have_caching_bg)
+ goto search;
+
if (!ins->objectid && ++index < BTRFS_NR_RAID_TYPES)
goto search;
int index = 0;
spin_lock(&info->lock);
- printk(KERN_INFO "space_info has %llu free, is %sfull\n",
+ printk(KERN_INFO "space_info %llu has %llu free, is %sfull\n",
+ (unsigned long long)info->flags,
(unsigned long long)(info->total_bytes - info->bytes_used -
info->bytes_pinned - info->bytes_reserved -
info->bytes_readonly),
return ret;
}
-int btrfs_free_reserved_extent(struct btrfs_root *root, u64 start, u64 len)
+static int __btrfs_free_reserved_extent(struct btrfs_root *root,
+ u64 start, u64 len, int pin)
{
struct btrfs_block_group_cache *cache;
int ret = 0;
if (btrfs_test_opt(root, DISCARD))
ret = btrfs_discard_extent(root, start, len, NULL);
- btrfs_add_free_space(cache, start, len);
- btrfs_update_reserved_bytes(cache, len, 0, 1);
+ if (pin)
+ pin_down_extent(root, cache, start, len, 1);
+ else {
+ btrfs_add_free_space(cache, start, len);
+ btrfs_update_reserved_bytes(cache, len, RESERVE_FREE);
+ }
btrfs_put_block_group(cache);
trace_btrfs_reserved_extent_free(root, start, len);
return ret;
}
+int btrfs_free_reserved_extent(struct btrfs_root *root,
+ u64 start, u64 len)
+{
+ return __btrfs_free_reserved_extent(root, start, len, 0);
+}
+
+int btrfs_free_and_pin_reserved_extent(struct btrfs_root *root,
+ u64 start, u64 len)
+{
+ return __btrfs_free_reserved_extent(root, start, len, 1);
+}
+
static int alloc_reserved_file_extent(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
u64 parent, u64 root_objectid,
put_caching_control(caching_ctl);
}
- ret = btrfs_update_reserved_bytes(block_group, ins->offset, 1, 1);
+ ret = btrfs_update_reserved_bytes(block_group, ins->offset,
+ RESERVE_ALLOC_NO_ACCOUNT);
BUG_ON(ret);
btrfs_put_block_group(block_group);
ret = alloc_reserved_file_extent(trans, root, 0, root_objectid,
block_rsv = get_block_rsv(trans, root);
if (block_rsv->size == 0) {
- ret = reserve_metadata_bytes(trans, root, block_rsv,
- blocksize, 0);
+ ret = reserve_metadata_bytes(root, block_rsv, blocksize, 0);
/*
* If we couldn't reserve metadata bytes try and use some from
* the global reserve.
if (!ret)
return block_rsv;
if (ret) {
- WARN_ON(1);
- ret = reserve_metadata_bytes(trans, root, block_rsv, blocksize,
- 0);
+ static DEFINE_RATELIMIT_STATE(_rs,
+ DEFAULT_RATELIMIT_INTERVAL,
+ /*DEFAULT_RATELIMIT_BURST*/ 2);
+ if (__ratelimit(&_rs)) {
+ printk(KERN_DEBUG "btrfs: block rsv returned %d\n", ret);
+ WARN_ON(1);
+ }
+ ret = reserve_metadata_bytes(root, block_rsv, blocksize, 0);
if (!ret) {
- spin_lock(&block_rsv->lock);
- block_rsv->size += blocksize;
- spin_unlock(&block_rsv->lock);
return block_rsv;
} else if (ret && block_rsv != global_rsv) {
ret = block_rsv_use_bytes(global_rsv, blocksize);
cache->bytes_super - btrfs_block_group_used(&cache->item);
if (sinfo->bytes_used + sinfo->bytes_reserved + sinfo->bytes_pinned +
- sinfo->bytes_may_use + sinfo->bytes_readonly +
- cache->reserved_pinned + num_bytes + min_allocable_bytes <=
- sinfo->total_bytes) {
+ sinfo->bytes_may_use + sinfo->bytes_readonly + num_bytes +
+ min_allocable_bytes <= sinfo->total_bytes) {
sinfo->bytes_readonly += num_bytes;
- sinfo->bytes_reserved += cache->reserved_pinned;
- cache->reserved_pinned = 0;
cache->ro = 1;
ret = 0;
}
struct btrfs_space_info,
list);
if (space_info->bytes_pinned > 0 ||
- space_info->bytes_reserved > 0) {
+ space_info->bytes_reserved > 0 ||
+ space_info->bytes_may_use > 0) {
WARN_ON(1);
dump_space_info(space_info, 0, 0);
}
return -ENOMEM;
path->reada = 1;
- cache_gen = btrfs_super_cache_generation(&root->fs_info->super_copy);
- if (cache_gen != 0 &&
- btrfs_super_generation(&root->fs_info->super_copy) != cache_gen)
+ cache_gen = btrfs_super_cache_generation(root->fs_info->super_copy);
+ if (btrfs_test_opt(root, SPACE_CACHE) &&
+ btrfs_super_generation(root->fs_info->super_copy) != cache_gen)
need_clear = 1;
if (btrfs_test_opt(root, CLEAR_CACHE))
need_clear = 1;
- if (!btrfs_test_opt(root, SPACE_CACHE) && cache_gen)
- printk(KERN_INFO "btrfs: disk space caching is enabled\n");
while (1) {
ret = find_first_block_group(root, path, &key);
goto out;
}
- inode = lookup_free_space_inode(root, block_group, path);
+ inode = lookup_free_space_inode(tree_root, block_group, path);
if (!IS_ERR(inode)) {
ret = btrfs_orphan_add(trans, inode);
BUG_ON(ret);
spin_unlock(&block_group->lock);
}
/* One for our lookup ref */
- iput(inode);
+ btrfs_add_delayed_iput(inode);
}
key.objectid = BTRFS_FREE_SPACE_OBJECTID;
int mixed = 0;
int ret;
- disk_super = &fs_info->super_copy;
+ disk_super = fs_info->super_copy;
if (!btrfs_super_root(disk_super))
return 1;
#include "compat.h"
#include "ctree.h"
#include "btrfs_inode.h"
+#include "volumes.h"
static struct kmem_cache *extent_state_cache;
static struct kmem_cache *extent_buffer_cache;
goto again;
}
+/**
+ * convert_extent - convert all bits in a given range from one bit to another
+ * @tree: the io tree to search
+ * @start: the start offset in bytes
+ * @end: the end offset in bytes (inclusive)
+ * @bits: the bits to set in this range
+ * @clear_bits: the bits to clear in this range
+ * @mask: the allocation mask
+ *
+ * This will go through and set bits for the given range. If any states exist
+ * already in this range they are set with the given bit and cleared of the
+ * clear_bits. This is only meant to be used by things that are mergeable, ie
+ * converting from say DELALLOC to DIRTY. This is not meant to be used with
+ * boundary bits like LOCK.
+ */
+int convert_extent_bit(struct extent_io_tree *tree, u64 start, u64 end,
+ int bits, int clear_bits, gfp_t mask)
+{
+ struct extent_state *state;
+ struct extent_state *prealloc = NULL;
+ struct rb_node *node;
+ int err = 0;
+ u64 last_start;
+ u64 last_end;
+
+again:
+ if (!prealloc && (mask & __GFP_WAIT)) {
+ prealloc = alloc_extent_state(mask);
+ if (!prealloc)
+ return -ENOMEM;
+ }
+
+ spin_lock(&tree->lock);
+ /*
+ * this search will find all the extents that end after
+ * our range starts.
+ */
+ node = tree_search(tree, start);
+ if (!node) {
+ prealloc = alloc_extent_state_atomic(prealloc);
+ if (!prealloc)
+ return -ENOMEM;
+ err = insert_state(tree, prealloc, start, end, &bits);
+ prealloc = NULL;
+ BUG_ON(err == -EEXIST);
+ goto out;
+ }
+ state = rb_entry(node, struct extent_state, rb_node);
+hit_next:
+ last_start = state->start;
+ last_end = state->end;
+
+ /*
+ * | ---- desired range ---- |
+ * | state |
+ *
+ * Just lock what we found and keep going
+ */
+ if (state->start == start && state->end <= end) {
+ struct rb_node *next_node;
+
+ set_state_bits(tree, state, &bits);
+ clear_state_bit(tree, state, &clear_bits, 0);
+
+ merge_state(tree, state);
+ if (last_end == (u64)-1)
+ goto out;
+
+ start = last_end + 1;
+ next_node = rb_next(&state->rb_node);
+ if (next_node && start < end && prealloc && !need_resched()) {
+ state = rb_entry(next_node, struct extent_state,
+ rb_node);
+ if (state->start == start)
+ goto hit_next;
+ }
+ goto search_again;
+ }
+
+ /*
+ * | ---- desired range ---- |
+ * | state |
+ * or
+ * | ------------- state -------------- |
+ *
+ * We need to split the extent we found, and may flip bits on
+ * second half.
+ *
+ * If the extent we found extends past our
+ * range, we just split and search again. It'll get split
+ * again the next time though.
+ *
+ * If the extent we found is inside our range, we set the
+ * desired bit on it.
+ */
+ if (state->start < start) {
+ prealloc = alloc_extent_state_atomic(prealloc);
+ if (!prealloc)
+ return -ENOMEM;
+ err = split_state(tree, state, prealloc, start);
+ BUG_ON(err == -EEXIST);
+ prealloc = NULL;
+ if (err)
+ goto out;
+ if (state->end <= end) {
+ set_state_bits(tree, state, &bits);
+ clear_state_bit(tree, state, &clear_bits, 0);
+ merge_state(tree, state);
+ if (last_end == (u64)-1)
+ goto out;
+ start = last_end + 1;
+ }
+ goto search_again;
+ }
+ /*
+ * | ---- desired range ---- |
+ * | state | or | state |
+ *
+ * There's a hole, we need to insert something in it and
+ * ignore the extent we found.
+ */
+ if (state->start > start) {
+ u64 this_end;
+ if (end < last_start)
+ this_end = end;
+ else
+ this_end = last_start - 1;
+
+ prealloc = alloc_extent_state_atomic(prealloc);
+ if (!prealloc)
+ return -ENOMEM;
+
+ /*
+ * Avoid to free 'prealloc' if it can be merged with
+ * the later extent.
+ */
+ err = insert_state(tree, prealloc, start, this_end,
+ &bits);
+ BUG_ON(err == -EEXIST);
+ if (err) {
+ free_extent_state(prealloc);
+ prealloc = NULL;
+ goto out;
+ }
+ prealloc = NULL;
+ start = this_end + 1;
+ goto search_again;
+ }
+ /*
+ * | ---- desired range ---- |
+ * | state |
+ * We need to split the extent, and set the bit
+ * on the first half
+ */
+ if (state->start <= end && state->end > end) {
+ prealloc = alloc_extent_state_atomic(prealloc);
+ if (!prealloc)
+ return -ENOMEM;
+
+ err = split_state(tree, state, prealloc, end + 1);
+ BUG_ON(err == -EEXIST);
+
+ set_state_bits(tree, prealloc, &bits);
+ clear_state_bit(tree, prealloc, &clear_bits, 0);
+
+ merge_state(tree, prealloc);
+ prealloc = NULL;
+ goto out;
+ }
+
+ goto search_again;
+
+out:
+ spin_unlock(&tree->lock);
+ if (prealloc)
+ free_extent_state(prealloc);
+
+ return err;
+
+search_again:
+ if (start > end)
+ goto out;
+ spin_unlock(&tree->lock);
+ if (mask & __GFP_WAIT)
+ cond_resched();
+ goto again;
+}
+
/* wrappers around set/clear extent bit */
int set_extent_dirty(struct extent_io_tree *tree, u64 start, u64 end,
gfp_t mask)
struct extent_state **cached_state, gfp_t mask)
{
return set_extent_bit(tree, start, end,
- EXTENT_DELALLOC | EXTENT_DIRTY | EXTENT_UPTODATE,
+ EXTENT_DELALLOC | EXTENT_UPTODATE,
0, NULL, cached_state, mask);
}
return 0;
}
+/*
+ * When IO fails, either with EIO or csum verification fails, we
+ * try other mirrors that might have a good copy of the data. This
+ * io_failure_record is used to record state as we go through all the
+ * mirrors. If another mirror has good data, the page is set up to date
+ * and things continue. If a good mirror can't be found, the original
+ * bio end_io callback is called to indicate things have failed.
+ */
+struct io_failure_record {
+ struct page *page;
+ u64 start;
+ u64 len;
+ u64 logical;
+ unsigned long bio_flags;
+ int this_mirror;
+ int failed_mirror;
+ int in_validation;
+};
+
+static int free_io_failure(struct inode *inode, struct io_failure_record *rec,
+ int did_repair)
+{
+ int ret;
+ int err = 0;
+ struct extent_io_tree *failure_tree = &BTRFS_I(inode)->io_failure_tree;
+
+ set_state_private(failure_tree, rec->start, 0);
+ ret = clear_extent_bits(failure_tree, rec->start,
+ rec->start + rec->len - 1,
+ EXTENT_LOCKED | EXTENT_DIRTY, GFP_NOFS);
+ if (ret)
+ err = ret;
+
+ if (did_repair) {
+ ret = clear_extent_bits(&BTRFS_I(inode)->io_tree, rec->start,
+ rec->start + rec->len - 1,
+ EXTENT_DAMAGED, GFP_NOFS);
+ if (ret && !err)
+ err = ret;
+ }
+
+ kfree(rec);
+ return err;
+}
+
+static void repair_io_failure_callback(struct bio *bio, int err)
+{
+ complete(bio->bi_private);
+}
+
+/*
+ * this bypasses the standard btrfs submit functions deliberately, as
+ * the standard behavior is to write all copies in a raid setup. here we only
+ * want to write the one bad copy. so we do the mapping for ourselves and issue
+ * submit_bio directly.
+ * to avoid any synchonization issues, wait for the data after writing, which
+ * actually prevents the read that triggered the error from finishing.
+ * currently, there can be no more than two copies of every data bit. thus,
+ * exactly one rewrite is required.
+ */
+int repair_io_failure(struct btrfs_mapping_tree *map_tree, u64 start,
+ u64 length, u64 logical, struct page *page,
+ int mirror_num)
+{
+ struct bio *bio;
+ struct btrfs_device *dev;
+ DECLARE_COMPLETION_ONSTACK(compl);
+ u64 map_length = 0;
+ u64 sector;
+ struct btrfs_bio *bbio = NULL;
+ int ret;
+
+ BUG_ON(!mirror_num);
+
+ bio = bio_alloc(GFP_NOFS, 1);
+ if (!bio)
+ return -EIO;
+ bio->bi_private = &compl;
+ bio->bi_end_io = repair_io_failure_callback;
+ bio->bi_size = 0;
+ map_length = length;
+
+ ret = btrfs_map_block(map_tree, WRITE, logical,
+ &map_length, &bbio, mirror_num);
+ if (ret) {
+ bio_put(bio);
+ return -EIO;
+ }
+ BUG_ON(mirror_num != bbio->mirror_num);
+ sector = bbio->stripes[mirror_num-1].physical >> 9;
+ bio->bi_sector = sector;
+ dev = bbio->stripes[mirror_num-1].dev;
+ kfree(bbio);
+ if (!dev || !dev->bdev || !dev->writeable) {
+ bio_put(bio);
+ return -EIO;
+ }
+ bio->bi_bdev = dev->bdev;
+ bio_add_page(bio, page, length, start-page_offset(page));
+ submit_bio(WRITE_SYNC, bio);
+ wait_for_completion(&compl);
+
+ if (!test_bit(BIO_UPTODATE, &bio->bi_flags)) {
+ /* try to remap that extent elsewhere? */
+ bio_put(bio);
+ return -EIO;
+ }
+
+ printk(KERN_INFO "btrfs read error corrected: ino %lu off %llu (dev %s "
+ "sector %llu)\n", page->mapping->host->i_ino, start,
+ dev->name, sector);
+
+ bio_put(bio);
+ return 0;
+}
+
+/*
+ * each time an IO finishes, we do a fast check in the IO failure tree
+ * to see if we need to process or clean up an io_failure_record
+ */
+static int clean_io_failure(u64 start, struct page *page)
+{
+ u64 private;
+ u64 private_failure;
+ struct io_failure_record *failrec;
+ struct btrfs_mapping_tree *map_tree;
+ struct extent_state *state;
+ int num_copies;
+ int did_repair = 0;
+ int ret;
+ struct inode *inode = page->mapping->host;
+
+ private = 0;
+ ret = count_range_bits(&BTRFS_I(inode)->io_failure_tree, &private,
+ (u64)-1, 1, EXTENT_DIRTY, 0);
+ if (!ret)
+ return 0;
+
+ ret = get_state_private(&BTRFS_I(inode)->io_failure_tree, start,
+ &private_failure);
+ if (ret)
+ return 0;
+
+ failrec = (struct io_failure_record *)(unsigned long) private_failure;
+ BUG_ON(!failrec->this_mirror);
+
+ if (failrec->in_validation) {
+ /* there was no real error, just free the record */
+ pr_debug("clean_io_failure: freeing dummy error at %llu\n",
+ failrec->start);
+ did_repair = 1;
+ goto out;
+ }
+
+ spin_lock(&BTRFS_I(inode)->io_tree.lock);
+ state = find_first_extent_bit_state(&BTRFS_I(inode)->io_tree,
+ failrec->start,
+ EXTENT_LOCKED);
+ spin_unlock(&BTRFS_I(inode)->io_tree.lock);
+
+ if (state && state->start == failrec->start) {
+ map_tree = &BTRFS_I(inode)->root->fs_info->mapping_tree;
+ num_copies = btrfs_num_copies(map_tree, failrec->logical,
+ failrec->len);
+ if (num_copies > 1) {
+ ret = repair_io_failure(map_tree, start, failrec->len,
+ failrec->logical, page,
+ failrec->failed_mirror);
+ did_repair = !ret;
+ }
+ }
+
+out:
+ if (!ret)
+ ret = free_io_failure(inode, failrec, did_repair);
+
+ return ret;
+}
+
+/*
+ * this is a generic handler for readpage errors (default
+ * readpage_io_failed_hook). if other copies exist, read those and write back
+ * good data to the failed position. does not investigate in remapping the
+ * failed extent elsewhere, hoping the device will be smart enough to do this as
+ * needed
+ */
+
+static int bio_readpage_error(struct bio *failed_bio, struct page *page,
+ u64 start, u64 end, int failed_mirror,
+ struct extent_state *state)
+{
+ struct io_failure_record *failrec = NULL;
+ u64 private;
+ struct extent_map *em;
+ struct inode *inode = page->mapping->host;
+ struct extent_io_tree *failure_tree = &BTRFS_I(inode)->io_failure_tree;
+ struct extent_io_tree *tree = &BTRFS_I(inode)->io_tree;
+ struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree;
+ struct bio *bio;
+ int num_copies;
+ int ret;
+ int read_mode;
+ u64 logical;
+
+ BUG_ON(failed_bio->bi_rw & REQ_WRITE);
+
+ ret = get_state_private(failure_tree, start, &private);
+ if (ret) {
+ failrec = kzalloc(sizeof(*failrec), GFP_NOFS);
+ if (!failrec)
+ return -ENOMEM;
+ failrec->start = start;
+ failrec->len = end - start + 1;
+ failrec->this_mirror = 0;
+ failrec->bio_flags = 0;
+ failrec->in_validation = 0;
+
+ read_lock(&em_tree->lock);
+ em = lookup_extent_mapping(em_tree, start, failrec->len);
+ if (!em) {
+ read_unlock(&em_tree->lock);
+ kfree(failrec);
+ return -EIO;
+ }
+
+ if (em->start > start || em->start + em->len < start) {
+ free_extent_map(em);
+ em = NULL;
+ }
+ read_unlock(&em_tree->lock);
+
+ if (!em || IS_ERR(em)) {
+ kfree(failrec);
+ return -EIO;
+ }
+ logical = start - em->start;
+ logical = em->block_start + logical;
+ if (test_bit(EXTENT_FLAG_COMPRESSED, &em->flags)) {
+ logical = em->block_start;
+ failrec->bio_flags = EXTENT_BIO_COMPRESSED;
+ extent_set_compress_type(&failrec->bio_flags,
+ em->compress_type);
+ }
+ pr_debug("bio_readpage_error: (new) logical=%llu, start=%llu, "
+ "len=%llu\n", logical, start, failrec->len);
+ failrec->logical = logical;
+ free_extent_map(em);
+
+ /* set the bits in the private failure tree */
+ ret = set_extent_bits(failure_tree, start, end,
+ EXTENT_LOCKED | EXTENT_DIRTY, GFP_NOFS);
+ if (ret >= 0)
+ ret = set_state_private(failure_tree, start,
+ (u64)(unsigned long)failrec);
+ /* set the bits in the inode's tree */
+ if (ret >= 0)
+ ret = set_extent_bits(tree, start, end, EXTENT_DAMAGED,
+ GFP_NOFS);
+ if (ret < 0) {
+ kfree(failrec);
+ return ret;
+ }
+ } else {
+ failrec = (struct io_failure_record *)(unsigned long)private;
+ pr_debug("bio_readpage_error: (found) logical=%llu, "
+ "start=%llu, len=%llu, validation=%d\n",
+ failrec->logical, failrec->start, failrec->len,
+ failrec->in_validation);
+ /*
+ * when data can be on disk more than twice, add to failrec here
+ * (e.g. with a list for failed_mirror) to make
+ * clean_io_failure() clean all those errors at once.
+ */
+ }
+ num_copies = btrfs_num_copies(
+ &BTRFS_I(inode)->root->fs_info->mapping_tree,
+ failrec->logical, failrec->len);
+ if (num_copies == 1) {
+ /*
+ * we only have a single copy of the data, so don't bother with
+ * all the retry and error correction code that follows. no
+ * matter what the error is, it is very likely to persist.
+ */
+ pr_debug("bio_readpage_error: cannot repair, num_copies == 1. "
+ "state=%p, num_copies=%d, next_mirror %d, "
+ "failed_mirror %d\n", state, num_copies,
+ failrec->this_mirror, failed_mirror);
+ free_io_failure(inode, failrec, 0);
+ return -EIO;
+ }
+
+ if (!state) {
+ spin_lock(&tree->lock);
+ state = find_first_extent_bit_state(tree, failrec->start,
+ EXTENT_LOCKED);
+ if (state && state->start != failrec->start)
+ state = NULL;
+ spin_unlock(&tree->lock);
+ }
+
+ /*
+ * there are two premises:
+ * a) deliver good data to the caller
+ * b) correct the bad sectors on disk
+ */
+ if (failed_bio->bi_vcnt > 1) {
+ /*
+ * to fulfill b), we need to know the exact failing sectors, as
+ * we don't want to rewrite any more than the failed ones. thus,
+ * we need separate read requests for the failed bio
+ *
+ * if the following BUG_ON triggers, our validation request got
+ * merged. we need separate requests for our algorithm to work.
+ */
+ BUG_ON(failrec->in_validation);
+ failrec->in_validation = 1;
+ failrec->this_mirror = failed_mirror;
+ read_mode = READ_SYNC | REQ_FAILFAST_DEV;
+ } else {
+ /*
+ * we're ready to fulfill a) and b) alongside. get a good copy
+ * of the failed sector and if we succeed, we have setup
+ * everything for repair_io_failure to do the rest for us.
+ */
+ if (failrec->in_validation) {
+ BUG_ON(failrec->this_mirror != failed_mirror);
+ failrec->in_validation = 0;
+ failrec->this_mirror = 0;
+ }
+ failrec->failed_mirror = failed_mirror;
+ failrec->this_mirror++;
+ if (failrec->this_mirror == failed_mirror)
+ failrec->this_mirror++;
+ read_mode = READ_SYNC;
+ }
+
+ if (!state || failrec->this_mirror > num_copies) {
+ pr_debug("bio_readpage_error: (fail) state=%p, num_copies=%d, "
+ "next_mirror %d, failed_mirror %d\n", state,
+ num_copies, failrec->this_mirror, failed_mirror);
+ free_io_failure(inode, failrec, 0);
+ return -EIO;
+ }
+
+ bio = bio_alloc(GFP_NOFS, 1);
+ bio->bi_private = state;
+ bio->bi_end_io = failed_bio->bi_end_io;
+ bio->bi_sector = failrec->logical >> 9;
+ bio->bi_bdev = BTRFS_I(inode)->root->fs_info->fs_devices->latest_bdev;
+ bio->bi_size = 0;
+
+ bio_add_page(bio, page, failrec->len, start - page_offset(page));
+
+ pr_debug("bio_readpage_error: submitting new read[%#x] to "
+ "this_mirror=%d, num_copies=%d, in_validation=%d\n", read_mode,
+ failrec->this_mirror, num_copies, failrec->in_validation);
+
+ tree->ops->submit_bio_hook(inode, read_mode, bio, failrec->this_mirror,
+ failrec->bio_flags, 0);
+ return 0;
+}
+
/* lots and lots of room for performance fixes in the end_bio funcs */
/*
struct extent_state *cached = NULL;
struct extent_state *state;
+ pr_debug("end_bio_extent_readpage: bi_vcnt=%d, idx=%d, err=%d, "
+ "mirror=%ld\n", bio->bi_vcnt, bio->bi_idx, err,
+ (long int)bio->bi_bdev);
tree = &BTRFS_I(page->mapping->host)->io_tree;
start = ((u64)page->index << PAGE_CACHE_SHIFT) +
state);
if (ret)
uptodate = 0;
+ else
+ clean_io_failure(start, page);
}
- if (!uptodate && tree->ops &&
- tree->ops->readpage_io_failed_hook) {
- ret = tree->ops->readpage_io_failed_hook(bio, page,
- start, end, NULL);
+ if (!uptodate) {
+ u64 failed_mirror;
+ failed_mirror = (u64)bio->bi_bdev;
+ if (tree->ops && tree->ops->readpage_io_failed_hook)
+ ret = tree->ops->readpage_io_failed_hook(
+ bio, page, start, end,
+ failed_mirror, state);
+ else
+ ret = bio_readpage_error(bio, page, start, end,
+ failed_mirror, NULL);
if (ret == 0) {
uptodate =
test_bit(BIO_UPTODATE, &bio->bi_flags);
mirror_num, bio_flags, start);
else
submit_bio(rw, bio);
+
if (bio_flagged(bio, BIO_EOPNOTSUPP))
ret = -EOPNOTSUPP;
bio_put(bio);
}
int extent_read_full_page(struct extent_io_tree *tree, struct page *page,
- get_extent_t *get_extent)
+ get_extent_t *get_extent, int mirror_num)
{
struct bio *bio = NULL;
unsigned long bio_flags = 0;
int ret;
- ret = __extent_read_full_page(tree, page, get_extent, &bio, 0,
+ ret = __extent_read_full_page(tree, page, get_extent, &bio, mirror_num,
&bio_flags);
if (bio)
- ret = submit_one_bio(READ, bio, 0, bio_flags);
+ ret = submit_one_bio(READ, bio, mirror_num, bio_flags);
return ret;
}
int compressed;
int write_flags;
unsigned long nr_written = 0;
+ bool fill_delalloc = true;
if (wbc->sync_mode == WB_SYNC_ALL)
write_flags = WRITE_SYNC;
trace___extent_writepage(page, inode, wbc);
WARN_ON(!PageLocked(page));
+
+ ClearPageError(page);
+
pg_offset = i_size & (PAGE_CACHE_SIZE - 1);
if (page->index > end_index ||
(page->index == end_index && !pg_offset)) {
set_page_extent_mapped(page);
+ if (!tree->ops || !tree->ops->fill_delalloc)
+ fill_delalloc = false;
+
delalloc_start = start;
delalloc_end = 0;
page_started = 0;
- if (!epd->extent_locked) {
+ if (!epd->extent_locked && fill_delalloc) {
u64 delalloc_to_write = 0;
/*
* make sure the wbc mapping index is at least updated
* swizzled back from swapper_space to tmpfs file
* mapping
*/
- if (tree->ops && tree->ops->write_cache_pages_lock_hook)
- tree->ops->write_cache_pages_lock_hook(page);
- else
- lock_page(page);
+ if (tree->ops &&
+ tree->ops->write_cache_pages_lock_hook) {
+ tree->ops->write_cache_pages_lock_hook(page,
+ data, flush_fn);
+ } else {
+ if (!trylock_page(page)) {
+ flush_fn(data);
+ lock_page(page);
+ }
+ }
if (unlikely(page->mapping != mapping)) {
unlock_page(page);
return ret;
}
-static inline struct page *extent_buffer_page(struct extent_buffer *eb,
+inline struct page *extent_buffer_page(struct extent_buffer *eb,
unsigned long i)
{
struct page *p;
return p;
}
-static inline unsigned long num_extent_pages(u64 start, u64 len)
+inline unsigned long num_extent_pages(u64 start, u64 len)
{
return ((start + len + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT) -
(start >> PAGE_CACHE_SHIFT);
PAGECACHE_TAG_DIRTY);
}
spin_unlock_irq(&page->mapping->tree_lock);
+ ClearPageError(page);
unlock_page(page);
}
return 0;
}
int read_extent_buffer_pages(struct extent_io_tree *tree,
- struct extent_buffer *eb,
- u64 start, int wait,
+ struct extent_buffer *eb, u64 start, int wait,
get_extent_t *get_extent, int mirror_num)
{
unsigned long i;
num_pages = num_extent_pages(eb->start, eb->len);
for (i = start_i; i < num_pages; i++) {
page = extent_buffer_page(eb, i);
- if (!wait) {
+ if (wait == WAIT_NONE) {
if (!trylock_page(page))
goto unlock_exit;
} else {
if (bio)
submit_one_bio(READ, bio, mirror_num, bio_flags);
- if (ret || !wait)
+ if (ret || wait != WAIT_COMPLETE)
return ret;
for (i = start_i; i < num_pages; i++) {
#define EXTENT_NODATASUM (1 << 10)
#define EXTENT_DO_ACCOUNTING (1 << 11)
#define EXTENT_FIRST_DELALLOC (1 << 12)
+#define EXTENT_NEED_WAIT (1 << 13)
+#define EXTENT_DAMAGED (1 << 14)
#define EXTENT_IOBITS (EXTENT_LOCKED | EXTENT_WRITEBACK)
#define EXTENT_CTLBITS (EXTENT_DO_ACCOUNTING | EXTENT_FIRST_DELALLOC)
#define EXTENT_BUFFER_BLOCKING 1
#define EXTENT_BUFFER_DIRTY 2
#define EXTENT_BUFFER_CORRUPT 3
+#define EXTENT_BUFFER_READAHEAD 4 /* this got triggered by readahead */
/* these are flags for extent_clear_unlock_delalloc */
#define EXTENT_CLEAR_UNLOCK_PAGE 0x1
unsigned long bio_flags);
int (*readpage_io_hook)(struct page *page, u64 start, u64 end);
int (*readpage_io_failed_hook)(struct bio *bio, struct page *page,
- u64 start, u64 end,
+ u64 start, u64 end, u64 failed_mirror,
struct extent_state *state);
int (*writepage_io_failed_hook)(struct bio *bio, struct page *page,
u64 start, u64 end,
struct extent_state *other);
void (*split_extent_hook)(struct inode *inode,
struct extent_state *orig, u64 split);
- int (*write_cache_pages_lock_hook)(struct page *page);
+ int (*write_cache_pages_lock_hook)(struct page *page, void *data,
+ void (*flush_fn)(void *));
};
struct extent_io_tree {
int try_lock_extent(struct extent_io_tree *tree, u64 start, u64 end,
gfp_t mask);
int extent_read_full_page(struct extent_io_tree *tree, struct page *page,
- get_extent_t *get_extent);
+ get_extent_t *get_extent, int mirror_num);
int __init extent_io_init(void);
void extent_io_exit(void);
gfp_t mask);
int clear_extent_dirty(struct extent_io_tree *tree, u64 start, u64 end,
gfp_t mask);
+int convert_extent_bit(struct extent_io_tree *tree, u64 start, u64 end,
+ int bits, int clear_bits, gfp_t mask);
int set_extent_delalloc(struct extent_io_tree *tree, u64 start, u64 end,
struct extent_state **cached_state, gfp_t mask);
int find_first_extent_bit(struct extent_io_tree *tree, u64 start,
struct extent_buffer *find_extent_buffer(struct extent_io_tree *tree,
u64 start, unsigned long len);
void free_extent_buffer(struct extent_buffer *eb);
+#define WAIT_NONE 0
+#define WAIT_COMPLETE 1
+#define WAIT_PAGE_LOCK 2
int read_extent_buffer_pages(struct extent_io_tree *tree,
struct extent_buffer *eb, u64 start, int wait,
get_extent_t *get_extent, int mirror_num);
+unsigned long num_extent_pages(u64 start, u64 len);
+struct page *extent_buffer_page(struct extent_buffer *eb, unsigned long i);
static inline void extent_buffer_get(struct extent_buffer *eb)
{
struct bio *
btrfs_bio_alloc(struct block_device *bdev, u64 first_sector, int nr_vecs,
gfp_t gfp_flags);
+
+struct btrfs_mapping_tree;
+
+int repair_io_failure(struct btrfs_mapping_tree *map_tree, u64 start,
+ u64 length, u64 logical, struct page *page,
+ int mirror_num);
#endif
struct btrfs_csum_item *item;
struct extent_buffer *leaf;
u64 csum_offset = 0;
- u16 csum_size =
- btrfs_super_csum_size(&root->fs_info->super_copy);
+ u16 csum_size = btrfs_super_csum_size(root->fs_info->super_copy);
int csums_in_item;
file_key.objectid = BTRFS_EXTENT_CSUM_OBJECTID;
u64 item_last_offset = 0;
u64 disk_bytenr;
u32 diff;
- u16 csum_size =
- btrfs_super_csum_size(&root->fs_info->super_copy);
+ u16 csum_size = btrfs_super_csum_size(root->fs_info->super_copy);
int ret;
struct btrfs_path *path;
struct btrfs_csum_item *item = NULL;
int ret;
size_t size;
u64 csum_end;
- u16 csum_size = btrfs_super_csum_size(&root->fs_info->super_copy);
+ u16 csum_size = btrfs_super_csum_size(root->fs_info->super_copy);
path = btrfs_alloc_path();
if (!path)
u64 bytenr, u64 len)
{
struct extent_buffer *leaf;
- u16 csum_size =
- btrfs_super_csum_size(&root->fs_info->super_copy);
+ u16 csum_size = btrfs_super_csum_size(root->fs_info->super_copy);
u64 csum_end;
u64 end_byte = bytenr + len;
u32 blocksize_bits = root->fs_info->sb->s_blocksize_bits;
u64 csum_end;
struct extent_buffer *leaf;
int ret;
- u16 csum_size =
- btrfs_super_csum_size(&root->fs_info->super_copy);
+ u16 csum_size = btrfs_super_csum_size(root->fs_info->super_copy);
int blocksize_bits = root->fs_info->sb->s_blocksize_bits;
root = root->fs_info->csum_root;
struct btrfs_sector_sum *sector_sum;
u32 nritems;
u32 ins_size;
- u16 csum_size =
- btrfs_super_csum_size(&root->fs_info->super_copy);
+ u16 csum_size = btrfs_super_csum_size(root->fs_info->super_copy);
path = btrfs_alloc_path();
if (!path)
int i;
unsigned long index = pos >> PAGE_CACHE_SHIFT;
struct inode *inode = fdentry(file)->d_inode;
+ gfp_t mask = btrfs_alloc_write_mask(inode->i_mapping);
int err = 0;
int faili = 0;
u64 start_pos;
again:
for (i = 0; i < num_pages; i++) {
pages[i] = find_or_create_page(inode->i_mapping, index + i,
- GFP_NOFS);
+ mask);
if (!pages[i]) {
faili = i - 1;
err = -ENOMEM;
goto out;
}
- ret = btrfs_check_data_free_space(inode, alloc_end - alloc_start);
- if (ret)
- goto out;
-
locked_end = alloc_end - 1;
while (1) {
struct btrfs_ordered_extent *ordered;
if (em->block_start == EXTENT_MAP_HOLE ||
(cur_offset >= inode->i_size &&
!test_bit(EXTENT_FLAG_PREALLOC, &em->flags))) {
+
+ /*
+ * Make sure we have enough space before we do the
+ * allocation.
+ */
+ ret = btrfs_check_data_free_space(inode, last_byte -
+ cur_offset);
+ if (ret) {
+ free_extent_map(em);
+ break;
+ }
+
ret = btrfs_prealloc_file_range(inode, mode, cur_offset,
last_byte - cur_offset,
1 << inode->i_blkbits,
offset + len,
&alloc_hint);
+
+ /* Let go of our reservation. */
+ btrfs_free_reserved_data_space(inode, last_byte -
+ cur_offset);
if (ret < 0) {
free_extent_map(em);
break;
}
unlock_extent_cached(&BTRFS_I(inode)->io_tree, alloc_start, locked_end,
&cached_state, GFP_NOFS);
-
- btrfs_free_reserved_data_space(inode, alloc_end - alloc_start);
out:
mutex_unlock(&inode->i_mutex);
return ret;
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/math64.h>
+#include <linux/ratelimit.h>
#include "ctree.h"
#include "free-space-cache.h"
#include "transaction.h"
*block_group, struct btrfs_path *path)
{
struct inode *inode = NULL;
+ u32 flags = BTRFS_INODE_NODATASUM | BTRFS_INODE_NODATACOW;
spin_lock(&block_group->lock);
if (block_group->inode)
return inode;
spin_lock(&block_group->lock);
- if (BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM) {
+ if (!((BTRFS_I(inode)->flags & flags) == flags)) {
printk(KERN_INFO "Old style space inode found, converting.\n");
- BTRFS_I(inode)->flags &= ~BTRFS_INODE_NODATASUM;
+ BTRFS_I(inode)->flags |= BTRFS_INODE_NODATASUM |
+ BTRFS_INODE_NODATACOW;
block_group->disk_cache_state = BTRFS_DC_CLEAR;
}
- if (!btrfs_fs_closing(root->fs_info)) {
+ if (!block_group->iref) {
block_group->inode = igrab(inode);
block_group->iref = 1;
}
struct btrfs_free_space_header *header;
struct btrfs_inode_item *inode_item;
struct extent_buffer *leaf;
+ u64 flags = BTRFS_INODE_NOCOMPRESS | BTRFS_INODE_PREALLOC;
int ret;
ret = btrfs_insert_empty_inode(trans, root, path, ino);
if (ret)
return ret;
+ /* We inline crc's for the free disk space cache */
+ if (ino != BTRFS_FREE_INO_OBJECTID)
+ flags |= BTRFS_INODE_NODATASUM | BTRFS_INODE_NODATACOW;
+
leaf = path->nodes[0];
inode_item = btrfs_item_ptr(leaf, path->slots[0],
struct btrfs_inode_item);
btrfs_set_inode_uid(leaf, inode_item, 0);
btrfs_set_inode_gid(leaf, inode_item, 0);
btrfs_set_inode_mode(leaf, inode_item, S_IFREG | 0600);
- btrfs_set_inode_flags(leaf, inode_item, BTRFS_INODE_NOCOMPRESS |
- BTRFS_INODE_PREALLOC);
+ btrfs_set_inode_flags(leaf, inode_item, flags);
btrfs_set_inode_nlink(leaf, inode_item, 1);
btrfs_set_inode_transid(leaf, inode_item, trans->transid);
btrfs_set_inode_block_group(leaf, inode_item, offset);
struct inode *inode)
{
struct btrfs_block_rsv *rsv;
+ u64 needed_bytes;
loff_t oldsize;
int ret = 0;
rsv = trans->block_rsv;
- trans->block_rsv = root->orphan_block_rsv;
- ret = btrfs_block_rsv_check(trans, root,
- root->orphan_block_rsv,
- 0, 5);
- if (ret)
- return ret;
+ trans->block_rsv = &root->fs_info->global_block_rsv;
+
+ /* 1 for slack space, 1 for updating the inode */
+ needed_bytes = btrfs_calc_trunc_metadata_size(root, 1) +
+ btrfs_calc_trans_metadata_size(root, 1);
+
+ spin_lock(&trans->block_rsv->lock);
+ if (trans->block_rsv->reserved < needed_bytes) {
+ spin_unlock(&trans->block_rsv->lock);
+ trans->block_rsv = rsv;
+ return -ENOSPC;
+ }
+ spin_unlock(&trans->block_rsv->lock);
oldsize = i_size_read(inode);
btrfs_i_size_write(inode, 0);
ret = btrfs_truncate_inode_items(trans, root, inode,
0, BTRFS_EXTENT_DATA_KEY);
- trans->block_rsv = rsv;
if (ret) {
+ trans->block_rsv = rsv;
WARN_ON(1);
return ret;
}
ret = btrfs_update_inode(trans, root, inode);
+ trans->block_rsv = rsv;
+
return ret;
}
return 0;
}
+struct io_ctl {
+ void *cur, *orig;
+ struct page *page;
+ struct page **pages;
+ struct btrfs_root *root;
+ unsigned long size;
+ int index;
+ int num_pages;
+ unsigned check_crcs:1;
+};
+
+static int io_ctl_init(struct io_ctl *io_ctl, struct inode *inode,
+ struct btrfs_root *root)
+{
+ memset(io_ctl, 0, sizeof(struct io_ctl));
+ io_ctl->num_pages = (i_size_read(inode) + PAGE_CACHE_SIZE - 1) >>
+ PAGE_CACHE_SHIFT;
+ io_ctl->pages = kzalloc(sizeof(struct page *) * io_ctl->num_pages,
+ GFP_NOFS);
+ if (!io_ctl->pages)
+ return -ENOMEM;
+ io_ctl->root = root;
+ if (btrfs_ino(inode) != BTRFS_FREE_INO_OBJECTID)
+ io_ctl->check_crcs = 1;
+ return 0;
+}
+
+static void io_ctl_free(struct io_ctl *io_ctl)
+{
+ kfree(io_ctl->pages);
+}
+
+static void io_ctl_unmap_page(struct io_ctl *io_ctl)
+{
+ if (io_ctl->cur) {
+ kunmap(io_ctl->page);
+ io_ctl->cur = NULL;
+ io_ctl->orig = NULL;
+ }
+}
+
+static void io_ctl_map_page(struct io_ctl *io_ctl, int clear)
+{
+ WARN_ON(io_ctl->cur);
+ BUG_ON(io_ctl->index >= io_ctl->num_pages);
+ io_ctl->page = io_ctl->pages[io_ctl->index++];
+ io_ctl->cur = kmap(io_ctl->page);
+ io_ctl->orig = io_ctl->cur;
+ io_ctl->size = PAGE_CACHE_SIZE;
+ if (clear)
+ memset(io_ctl->cur, 0, PAGE_CACHE_SIZE);
+}
+
+static void io_ctl_drop_pages(struct io_ctl *io_ctl)
+{
+ int i;
+
+ io_ctl_unmap_page(io_ctl);
+
+ for (i = 0; i < io_ctl->num_pages; i++) {
+ ClearPageChecked(io_ctl->pages[i]);
+ unlock_page(io_ctl->pages[i]);
+ page_cache_release(io_ctl->pages[i]);
+ }
+}
+
+static int io_ctl_prepare_pages(struct io_ctl *io_ctl, struct inode *inode,
+ int uptodate)
+{
+ struct page *page;
+ gfp_t mask = btrfs_alloc_write_mask(inode->i_mapping);
+ int i;
+
+ for (i = 0; i < io_ctl->num_pages; i++) {
+ page = find_or_create_page(inode->i_mapping, i, mask);
+ if (!page) {
+ io_ctl_drop_pages(io_ctl);
+ return -ENOMEM;
+ }
+ io_ctl->pages[i] = page;
+ if (uptodate && !PageUptodate(page)) {
+ btrfs_readpage(NULL, page);
+ lock_page(page);
+ if (!PageUptodate(page)) {
+ printk(KERN_ERR "btrfs: error reading free "
+ "space cache\n");
+ io_ctl_drop_pages(io_ctl);
+ return -EIO;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static void io_ctl_set_generation(struct io_ctl *io_ctl, u64 generation)
+{
+ u64 *val;
+
+ io_ctl_map_page(io_ctl, 1);
+
+ /*
+ * Skip the csum areas. If we don't check crcs then we just have a
+ * 64bit chunk at the front of the first page.
+ */
+ if (io_ctl->check_crcs) {
+ io_ctl->cur += (sizeof(u32) * io_ctl->num_pages);
+ io_ctl->size -= sizeof(u64) + (sizeof(u32) * io_ctl->num_pages);
+ } else {
+ io_ctl->cur += sizeof(u64);
+ io_ctl->size -= sizeof(u64) * 2;
+ }
+
+ val = io_ctl->cur;
+ *val = cpu_to_le64(generation);
+ io_ctl->cur += sizeof(u64);
+}
+
+static int io_ctl_check_generation(struct io_ctl *io_ctl, u64 generation)
+{
+ u64 *gen;
+
+ /*
+ * Skip the crc area. If we don't check crcs then we just have a 64bit
+ * chunk at the front of the first page.
+ */
+ if (io_ctl->check_crcs) {
+ io_ctl->cur += sizeof(u32) * io_ctl->num_pages;
+ io_ctl->size -= sizeof(u64) +
+ (sizeof(u32) * io_ctl->num_pages);
+ } else {
+ io_ctl->cur += sizeof(u64);
+ io_ctl->size -= sizeof(u64) * 2;
+ }
+
+ gen = io_ctl->cur;
+ if (le64_to_cpu(*gen) != generation) {
+ printk_ratelimited(KERN_ERR "btrfs: space cache generation "
+ "(%Lu) does not match inode (%Lu)\n", *gen,
+ generation);
+ io_ctl_unmap_page(io_ctl);
+ return -EIO;
+ }
+ io_ctl->cur += sizeof(u64);
+ return 0;
+}
+
+static void io_ctl_set_crc(struct io_ctl *io_ctl, int index)
+{
+ u32 *tmp;
+ u32 crc = ~(u32)0;
+ unsigned offset = 0;
+
+ if (!io_ctl->check_crcs) {
+ io_ctl_unmap_page(io_ctl);
+ return;
+ }
+
+ if (index == 0)
+ offset = sizeof(u32) * io_ctl->num_pages;;
+
+ crc = btrfs_csum_data(io_ctl->root, io_ctl->orig + offset, crc,
+ PAGE_CACHE_SIZE - offset);
+ btrfs_csum_final(crc, (char *)&crc);
+ io_ctl_unmap_page(io_ctl);
+ tmp = kmap(io_ctl->pages[0]);
+ tmp += index;
+ *tmp = crc;
+ kunmap(io_ctl->pages[0]);
+}
+
+static int io_ctl_check_crc(struct io_ctl *io_ctl, int index)
+{
+ u32 *tmp, val;
+ u32 crc = ~(u32)0;
+ unsigned offset = 0;
+
+ if (!io_ctl->check_crcs) {
+ io_ctl_map_page(io_ctl, 0);
+ return 0;
+ }
+
+ if (index == 0)
+ offset = sizeof(u32) * io_ctl->num_pages;
+
+ tmp = kmap(io_ctl->pages[0]);
+ tmp += index;
+ val = *tmp;
+ kunmap(io_ctl->pages[0]);
+
+ io_ctl_map_page(io_ctl, 0);
+ crc = btrfs_csum_data(io_ctl->root, io_ctl->orig + offset, crc,
+ PAGE_CACHE_SIZE - offset);
+ btrfs_csum_final(crc, (char *)&crc);
+ if (val != crc) {
+ printk_ratelimited(KERN_ERR "btrfs: csum mismatch on free "
+ "space cache\n");
+ io_ctl_unmap_page(io_ctl);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int io_ctl_add_entry(struct io_ctl *io_ctl, u64 offset, u64 bytes,
+ void *bitmap)
+{
+ struct btrfs_free_space_entry *entry;
+
+ if (!io_ctl->cur)
+ return -ENOSPC;
+
+ entry = io_ctl->cur;
+ entry->offset = cpu_to_le64(offset);
+ entry->bytes = cpu_to_le64(bytes);
+ entry->type = (bitmap) ? BTRFS_FREE_SPACE_BITMAP :
+ BTRFS_FREE_SPACE_EXTENT;
+ io_ctl->cur += sizeof(struct btrfs_free_space_entry);
+ io_ctl->size -= sizeof(struct btrfs_free_space_entry);
+
+ if (io_ctl->size >= sizeof(struct btrfs_free_space_entry))
+ return 0;
+
+ io_ctl_set_crc(io_ctl, io_ctl->index - 1);
+
+ /* No more pages to map */
+ if (io_ctl->index >= io_ctl->num_pages)
+ return 0;
+
+ /* map the next page */
+ io_ctl_map_page(io_ctl, 1);
+ return 0;
+}
+
+static int io_ctl_add_bitmap(struct io_ctl *io_ctl, void *bitmap)
+{
+ if (!io_ctl->cur)
+ return -ENOSPC;
+
+ /*
+ * If we aren't at the start of the current page, unmap this one and
+ * map the next one if there is any left.
+ */
+ if (io_ctl->cur != io_ctl->orig) {
+ io_ctl_set_crc(io_ctl, io_ctl->index - 1);
+ if (io_ctl->index >= io_ctl->num_pages)
+ return -ENOSPC;
+ io_ctl_map_page(io_ctl, 0);
+ }
+
+ memcpy(io_ctl->cur, bitmap, PAGE_CACHE_SIZE);
+ io_ctl_set_crc(io_ctl, io_ctl->index - 1);
+ if (io_ctl->index < io_ctl->num_pages)
+ io_ctl_map_page(io_ctl, 0);
+ return 0;
+}
+
+static void io_ctl_zero_remaining_pages(struct io_ctl *io_ctl)
+{
+ /*
+ * If we're not on the boundary we know we've modified the page and we
+ * need to crc the page.
+ */
+ if (io_ctl->cur != io_ctl->orig)
+ io_ctl_set_crc(io_ctl, io_ctl->index - 1);
+ else
+ io_ctl_unmap_page(io_ctl);
+
+ while (io_ctl->index < io_ctl->num_pages) {
+ io_ctl_map_page(io_ctl, 1);
+ io_ctl_set_crc(io_ctl, io_ctl->index - 1);
+ }
+}
+
+static int io_ctl_read_entry(struct io_ctl *io_ctl,
+ struct btrfs_free_space *entry, u8 *type)
+{
+ struct btrfs_free_space_entry *e;
+ int ret;
+
+ if (!io_ctl->cur) {
+ ret = io_ctl_check_crc(io_ctl, io_ctl->index);
+ if (ret)
+ return ret;
+ }
+
+ e = io_ctl->cur;
+ entry->offset = le64_to_cpu(e->offset);
+ entry->bytes = le64_to_cpu(e->bytes);
+ *type = e->type;
+ io_ctl->cur += sizeof(struct btrfs_free_space_entry);
+ io_ctl->size -= sizeof(struct btrfs_free_space_entry);
+
+ if (io_ctl->size >= sizeof(struct btrfs_free_space_entry))
+ return 0;
+
+ io_ctl_unmap_page(io_ctl);
+
+ return 0;
+}
+
+static int io_ctl_read_bitmap(struct io_ctl *io_ctl,
+ struct btrfs_free_space *entry)
+{
+ int ret;
+
+ ret = io_ctl_check_crc(io_ctl, io_ctl->index);
+ if (ret)
+ return ret;
+
+ memcpy(entry->bitmap, io_ctl->cur, PAGE_CACHE_SIZE);
+ io_ctl_unmap_page(io_ctl);
+
+ return 0;
+}
+
int __load_free_space_cache(struct btrfs_root *root, struct inode *inode,
struct btrfs_free_space_ctl *ctl,
struct btrfs_path *path, u64 offset)
{
struct btrfs_free_space_header *header;
struct extent_buffer *leaf;
- struct page *page;
+ struct io_ctl io_ctl;
struct btrfs_key key;
+ struct btrfs_free_space *e, *n;
struct list_head bitmaps;
u64 num_entries;
u64 num_bitmaps;
u64 generation;
- pgoff_t index = 0;
+ u8 type;
int ret = 0;
INIT_LIST_HEAD(&bitmaps);
/* Nothing in the space cache, goodbye */
if (!i_size_read(inode))
- goto out;
+ return 0;
key.objectid = BTRFS_FREE_SPACE_OBJECTID;
key.offset = offset;
ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
if (ret < 0)
- goto out;
+ return 0;
else if (ret > 0) {
btrfs_release_path(path);
- ret = 0;
- goto out;
+ return 0;
}
ret = -1;
" not match free space cache generation (%llu)\n",
(unsigned long long)BTRFS_I(inode)->generation,
(unsigned long long)generation);
- goto out;
+ return 0;
}
if (!num_entries)
- goto out;
+ return 0;
+ io_ctl_init(&io_ctl, inode, root);
ret = readahead_cache(inode);
if (ret)
goto out;
- while (1) {
- struct btrfs_free_space_entry *entry;
- struct btrfs_free_space *e;
- void *addr;
- unsigned long offset = 0;
- int need_loop = 0;
+ ret = io_ctl_prepare_pages(&io_ctl, inode, 1);
+ if (ret)
+ goto out;
- if (!num_entries && !num_bitmaps)
- break;
+ ret = io_ctl_check_crc(&io_ctl, 0);
+ if (ret)
+ goto free_cache;
- page = find_or_create_page(inode->i_mapping, index, GFP_NOFS);
- if (!page)
+ ret = io_ctl_check_generation(&io_ctl, generation);
+ if (ret)
+ goto free_cache;
+
+ while (num_entries) {
+ e = kmem_cache_zalloc(btrfs_free_space_cachep,
+ GFP_NOFS);
+ if (!e)
goto free_cache;
- if (!PageUptodate(page)) {
- btrfs_readpage(NULL, page);
- lock_page(page);
- if (!PageUptodate(page)) {
- unlock_page(page);
- page_cache_release(page);
- printk(KERN_ERR "btrfs: error reading free "
- "space cache\n");
- goto free_cache;
- }
+ ret = io_ctl_read_entry(&io_ctl, e, &type);
+ if (ret) {
+ kmem_cache_free(btrfs_free_space_cachep, e);
+ goto free_cache;
}
- addr = kmap(page);
- if (index == 0) {
- u64 *gen;
+ if (!e->bytes) {
+ kmem_cache_free(btrfs_free_space_cachep, e);
+ goto free_cache;
+ }
- /*
- * We put a bogus crc in the front of the first page in
- * case old kernels try to mount a fs with the new
- * format to make sure they discard the cache.
- */
- addr += sizeof(u64);
- offset += sizeof(u64);
-
- gen = addr;
- if (*gen != BTRFS_I(inode)->generation) {
- printk(KERN_ERR "btrfs: space cache generation"
- " (%llu) does not match inode (%llu)\n",
- (unsigned long long)*gen,
- (unsigned long long)
- BTRFS_I(inode)->generation);
- kunmap(page);
- unlock_page(page);
- page_cache_release(page);
+ if (type == BTRFS_FREE_SPACE_EXTENT) {
+ spin_lock(&ctl->tree_lock);
+ ret = link_free_space(ctl, e);
+ spin_unlock(&ctl->tree_lock);
+ if (ret) {
+ printk(KERN_ERR "Duplicate entries in "
+ "free space cache, dumping\n");
+ kmem_cache_free(btrfs_free_space_cachep, e);
goto free_cache;
}
- addr += sizeof(u64);
- offset += sizeof(u64);
- }
- entry = addr;
-
- while (1) {
- if (!num_entries)
- break;
-
- need_loop = 1;
- e = kmem_cache_zalloc(btrfs_free_space_cachep,
- GFP_NOFS);
- if (!e) {
- kunmap(page);
- unlock_page(page);
- page_cache_release(page);
+ } else {
+ BUG_ON(!num_bitmaps);
+ num_bitmaps--;
+ e->bitmap = kzalloc(PAGE_CACHE_SIZE, GFP_NOFS);
+ if (!e->bitmap) {
+ kmem_cache_free(
+ btrfs_free_space_cachep, e);
goto free_cache;
}
-
- e->offset = le64_to_cpu(entry->offset);
- e->bytes = le64_to_cpu(entry->bytes);
- if (!e->bytes) {
- kunmap(page);
+ spin_lock(&ctl->tree_lock);
+ ret = link_free_space(ctl, e);
+ ctl->total_bitmaps++;
+ ctl->op->recalc_thresholds(ctl);
+ spin_unlock(&ctl->tree_lock);
+ if (ret) {
+ printk(KERN_ERR "Duplicate entries in "
+ "free space cache, dumping\n");
kmem_cache_free(btrfs_free_space_cachep, e);
- unlock_page(page);
- page_cache_release(page);
goto free_cache;
}
-
- if (entry->type == BTRFS_FREE_SPACE_EXTENT) {
- spin_lock(&ctl->tree_lock);
- ret = link_free_space(ctl, e);
- spin_unlock(&ctl->tree_lock);
- if (ret) {
- printk(KERN_ERR "Duplicate entries in "
- "free space cache, dumping\n");
- kunmap(page);
- unlock_page(page);
- page_cache_release(page);
- goto free_cache;
- }
- } else {
- e->bitmap = kzalloc(PAGE_CACHE_SIZE, GFP_NOFS);
- if (!e->bitmap) {
- kunmap(page);
- kmem_cache_free(
- btrfs_free_space_cachep, e);
- unlock_page(page);
- page_cache_release(page);
- goto free_cache;
- }
- spin_lock(&ctl->tree_lock);
- ret = link_free_space(ctl, e);
- ctl->total_bitmaps++;
- ctl->op->recalc_thresholds(ctl);
- spin_unlock(&ctl->tree_lock);
- if (ret) {
- printk(KERN_ERR "Duplicate entries in "
- "free space cache, dumping\n");
- kunmap(page);
- unlock_page(page);
- page_cache_release(page);
- goto free_cache;
- }
- list_add_tail(&e->list, &bitmaps);
- }
-
- num_entries--;
- offset += sizeof(struct btrfs_free_space_entry);
- if (offset + sizeof(struct btrfs_free_space_entry) >=
- PAGE_CACHE_SIZE)
- break;
- entry++;
+ list_add_tail(&e->list, &bitmaps);
}
- /*
- * We read an entry out of this page, we need to move on to the
- * next page.
- */
- if (need_loop) {
- kunmap(page);
- goto next;
- }
+ num_entries--;
+ }
- /*
- * We add the bitmaps at the end of the entries in order that
- * the bitmap entries are added to the cache.
- */
- e = list_entry(bitmaps.next, struct btrfs_free_space, list);
+ io_ctl_unmap_page(&io_ctl);
+
+ /*
+ * We add the bitmaps at the end of the entries in order that
+ * the bitmap entries are added to the cache.
+ */
+ list_for_each_entry_safe(e, n, &bitmaps, list) {
list_del_init(&e->list);
- memcpy(e->bitmap, addr, PAGE_CACHE_SIZE);
- kunmap(page);
- num_bitmaps--;
-next:
- unlock_page(page);
- page_cache_release(page);
- index++;
+ ret = io_ctl_read_bitmap(&io_ctl, e);
+ if (ret)
+ goto free_cache;
}
+ io_ctl_drop_pages(&io_ctl);
ret = 1;
out:
+ io_ctl_free(&io_ctl);
return ret;
free_cache:
+ io_ctl_drop_pages(&io_ctl);
__btrfs_remove_free_space_cache(ctl);
goto out;
}
struct btrfs_root *root = fs_info->tree_root;
struct inode *inode;
struct btrfs_path *path;
- int ret;
+ int ret = 0;
bool matched;
u64 used = btrfs_block_group_used(&block_group->item);
return 0;
}
+ /* We may have converted the inode and made the cache invalid. */
+ spin_lock(&block_group->lock);
+ if (block_group->disk_cache_state != BTRFS_DC_WRITTEN) {
+ spin_unlock(&block_group->lock);
+ goto out;
+ }
+ spin_unlock(&block_group->lock);
+
ret = __load_free_space_cache(fs_info->tree_root, inode, ctl,
path, block_group->key.objectid);
btrfs_free_path(path);
return ret;
}
+/**
+ * __btrfs_write_out_cache - write out cached info to an inode
+ * @root - the root the inode belongs to
+ * @ctl - the free space cache we are going to write out
+ * @block_group - the block_group for this cache if it belongs to a block_group
+ * @trans - the trans handle
+ * @path - the path to use
+ * @offset - the offset for the key we'll insert
+ *
+ * This function writes out a free space cache struct to disk for quick recovery
+ * on mount. This will return 0 if it was successfull in writing the cache out,
+ * and -1 if it was not.
+ */
int __btrfs_write_out_cache(struct btrfs_root *root, struct inode *inode,
struct btrfs_free_space_ctl *ctl,
struct btrfs_block_group_cache *block_group,
struct extent_buffer *leaf;
struct rb_node *node;
struct list_head *pos, *n;
- struct page **pages;
- struct page *page;
struct extent_state *cached_state = NULL;
struct btrfs_free_cluster *cluster = NULL;
struct extent_io_tree *unpin = NULL;
+ struct io_ctl io_ctl;
struct list_head bitmap_list;
struct btrfs_key key;
u64 start, end, len;
- u64 bytes = 0;
- u32 crc = ~(u32)0;
- int index = 0, num_pages = 0;
int entries = 0;
int bitmaps = 0;
- int ret = -1;
- bool next_page = false;
- bool out_of_space = false;
+ int ret;
+ int err = -1;
INIT_LIST_HEAD(&bitmap_list);
- node = rb_first(&ctl->free_space_offset);
- if (!node)
- return 0;
-
if (!i_size_read(inode))
return -1;
- num_pages = (i_size_read(inode) + PAGE_CACHE_SIZE - 1) >>
- PAGE_CACHE_SHIFT;
-
- filemap_write_and_wait(inode->i_mapping);
- btrfs_wait_ordered_range(inode, inode->i_size &
- ~(root->sectorsize - 1), (u64)-1);
-
- pages = kzalloc(sizeof(struct page *) * num_pages, GFP_NOFS);
- if (!pages)
- return -1;
+ io_ctl_init(&io_ctl, inode, root);
/* Get the cluster for this block_group if it exists */
if (block_group && !list_empty(&block_group->cluster_list))
*/
unpin = root->fs_info->pinned_extents;
- /*
- * Lock all pages first so we can lock the extent safely.
- *
- * NOTE: Because we hold the ref the entire time we're going to write to
- * the page find_get_page should never fail, so we don't do a check
- * after find_get_page at this point. Just putting this here so people
- * know and don't freak out.
- */
- while (index < num_pages) {
- page = find_or_create_page(inode->i_mapping, index, GFP_NOFS);
- if (!page) {
- int i;
+ /* Lock all pages first so we can lock the extent safely. */
+ io_ctl_prepare_pages(&io_ctl, inode, 0);
- for (i = 0; i < num_pages; i++) {
- unlock_page(pages[i]);
- page_cache_release(pages[i]);
- }
- goto out;
- }
- pages[index] = page;
- index++;
- }
-
- index = 0;
lock_extent_bits(&BTRFS_I(inode)->io_tree, 0, i_size_read(inode) - 1,
0, &cached_state, GFP_NOFS);
if (block_group)
start = block_group->key.objectid;
- /* Write out the extent entries */
- do {
- struct btrfs_free_space_entry *entry;
- void *addr, *orig;
- unsigned long offset = 0;
+ node = rb_first(&ctl->free_space_offset);
+ if (!node && cluster) {
+ node = rb_first(&cluster->root);
+ cluster = NULL;
+ }
- next_page = false;
+ /* Make sure we can fit our crcs into the first page */
+ if (io_ctl.check_crcs &&
+ (io_ctl.num_pages * sizeof(u32)) >= PAGE_CACHE_SIZE) {
+ WARN_ON(1);
+ goto out_nospc;
+ }
- if (index >= num_pages) {
- out_of_space = true;
- break;
- }
+ io_ctl_set_generation(&io_ctl, trans->transid);
- page = pages[index];
+ /* Write out the extent entries */
+ while (node) {
+ struct btrfs_free_space *e;
- orig = addr = kmap(page);
- if (index == 0) {
- u64 *gen;
+ e = rb_entry(node, struct btrfs_free_space, offset_index);
+ entries++;
- /*
- * We're going to put in a bogus crc for this page to
- * make sure that old kernels who aren't aware of this
- * format will be sure to discard the cache.
- */
- addr += sizeof(u64);
- offset += sizeof(u64);
+ ret = io_ctl_add_entry(&io_ctl, e->offset, e->bytes,
+ e->bitmap);
+ if (ret)
+ goto out_nospc;
- gen = addr;
- *gen = trans->transid;
- addr += sizeof(u64);
- offset += sizeof(u64);
+ if (e->bitmap) {
+ list_add_tail(&e->list, &bitmap_list);
+ bitmaps++;
}
- entry = addr;
-
- memset(addr, 0, PAGE_CACHE_SIZE - offset);
- while (node && !next_page) {
- struct btrfs_free_space *e;
-
- e = rb_entry(node, struct btrfs_free_space, offset_index);
- entries++;
-
- entry->offset = cpu_to_le64(e->offset);
- entry->bytes = cpu_to_le64(e->bytes);
- if (e->bitmap) {
- entry->type = BTRFS_FREE_SPACE_BITMAP;
- list_add_tail(&e->list, &bitmap_list);
- bitmaps++;
- } else {
- entry->type = BTRFS_FREE_SPACE_EXTENT;
- }
- node = rb_next(node);
- if (!node && cluster) {
- node = rb_first(&cluster->root);
- cluster = NULL;
- }
- offset += sizeof(struct btrfs_free_space_entry);
- if (offset + sizeof(struct btrfs_free_space_entry) >=
- PAGE_CACHE_SIZE)
- next_page = true;
- entry++;
+ node = rb_next(node);
+ if (!node && cluster) {
+ node = rb_first(&cluster->root);
+ cluster = NULL;
}
+ }
- /*
- * We want to add any pinned extents to our free space cache
- * so we don't leak the space
- */
- while (block_group && !next_page &&
- (start < block_group->key.objectid +
- block_group->key.offset)) {
- ret = find_first_extent_bit(unpin, start, &start, &end,
- EXTENT_DIRTY);
- if (ret) {
- ret = 0;
- break;
- }
-
- /* This pinned extent is out of our range */
- if (start >= block_group->key.objectid +
- block_group->key.offset)
- break;
-
- len = block_group->key.objectid +
- block_group->key.offset - start;
- len = min(len, end + 1 - start);
-
- entries++;
- entry->offset = cpu_to_le64(start);
- entry->bytes = cpu_to_le64(len);
- entry->type = BTRFS_FREE_SPACE_EXTENT;
-
- start = end + 1;
- offset += sizeof(struct btrfs_free_space_entry);
- if (offset + sizeof(struct btrfs_free_space_entry) >=
- PAGE_CACHE_SIZE)
- next_page = true;
- entry++;
+ /*
+ * We want to add any pinned extents to our free space cache
+ * so we don't leak the space
+ */
+ while (block_group && (start < block_group->key.objectid +
+ block_group->key.offset)) {
+ ret = find_first_extent_bit(unpin, start, &start, &end,
+ EXTENT_DIRTY);
+ if (ret) {
+ ret = 0;
+ break;
}
- /* Generate bogus crc value */
- if (index == 0) {
- u32 *tmp;
- crc = btrfs_csum_data(root, orig + sizeof(u64), crc,
- PAGE_CACHE_SIZE - sizeof(u64));
- btrfs_csum_final(crc, (char *)&crc);
- crc++;
- tmp = orig;
- *tmp = crc;
- }
+ /* This pinned extent is out of our range */
+ if (start >= block_group->key.objectid +
+ block_group->key.offset)
+ break;
- kunmap(page);
+ len = block_group->key.objectid +
+ block_group->key.offset - start;
+ len = min(len, end + 1 - start);
- bytes += PAGE_CACHE_SIZE;
+ entries++;
+ ret = io_ctl_add_entry(&io_ctl, start, len, NULL);
+ if (ret)
+ goto out_nospc;
- index++;
- } while (node || next_page);
+ start = end + 1;
+ }
/* Write out the bitmaps */
list_for_each_safe(pos, n, &bitmap_list) {
- void *addr;
struct btrfs_free_space *entry =
list_entry(pos, struct btrfs_free_space, list);
- if (index >= num_pages) {
- out_of_space = true;
- break;
- }
- page = pages[index];
-
- addr = kmap(page);
- memcpy(addr, entry->bitmap, PAGE_CACHE_SIZE);
- kunmap(page);
- bytes += PAGE_CACHE_SIZE;
-
+ ret = io_ctl_add_bitmap(&io_ctl, entry->bitmap);
+ if (ret)
+ goto out_nospc;
list_del_init(&entry->list);
- index++;
- }
-
- if (out_of_space) {
- btrfs_drop_pages(pages, num_pages);
- unlock_extent_cached(&BTRFS_I(inode)->io_tree, 0,
- i_size_read(inode) - 1, &cached_state,
- GFP_NOFS);
- ret = 0;
- goto out;
}
/* Zero out the rest of the pages just to make sure */
- while (index < num_pages) {
- void *addr;
-
- page = pages[index];
- addr = kmap(page);
- memset(addr, 0, PAGE_CACHE_SIZE);
- kunmap(page);
- bytes += PAGE_CACHE_SIZE;
- index++;
- }
+ io_ctl_zero_remaining_pages(&io_ctl);
- ret = btrfs_dirty_pages(root, inode, pages, num_pages, 0,
- bytes, &cached_state);
- btrfs_drop_pages(pages, num_pages);
+ ret = btrfs_dirty_pages(root, inode, io_ctl.pages, io_ctl.num_pages,
+ 0, i_size_read(inode), &cached_state);
+ io_ctl_drop_pages(&io_ctl);
unlock_extent_cached(&BTRFS_I(inode)->io_tree, 0,
i_size_read(inode) - 1, &cached_state, GFP_NOFS);
- if (ret) {
- ret = 0;
+ if (ret)
goto out;
- }
- BTRFS_I(inode)->generation = trans->transid;
- filemap_write_and_wait(inode->i_mapping);
+ ret = filemap_write_and_wait(inode->i_mapping);
+ if (ret)
+ goto out;
key.objectid = BTRFS_FREE_SPACE_OBJECTID;
key.offset = offset;
key.type = 0;
- ret = btrfs_search_slot(trans, root, &key, path, 1, 1);
+ ret = btrfs_search_slot(trans, root, &key, path, 0, 1);
if (ret < 0) {
- ret = -1;
- clear_extent_bit(&BTRFS_I(inode)->io_tree, 0, bytes - 1,
- EXTENT_DIRTY | EXTENT_DELALLOC |
- EXTENT_DO_ACCOUNTING, 0, 0, NULL, GFP_NOFS);
+ clear_extent_bit(&BTRFS_I(inode)->io_tree, 0, inode->i_size - 1,
+ EXTENT_DIRTY | EXTENT_DELALLOC, 0, 0, NULL,
+ GFP_NOFS);
goto out;
}
leaf = path->nodes[0];
btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]);
if (found_key.objectid != BTRFS_FREE_SPACE_OBJECTID ||
found_key.offset != offset) {
- ret = -1;
- clear_extent_bit(&BTRFS_I(inode)->io_tree, 0, bytes - 1,
- EXTENT_DIRTY | EXTENT_DELALLOC |
- EXTENT_DO_ACCOUNTING, 0, 0, NULL,
- GFP_NOFS);
+ clear_extent_bit(&BTRFS_I(inode)->io_tree, 0,
+ inode->i_size - 1,
+ EXTENT_DIRTY | EXTENT_DELALLOC, 0, 0,
+ NULL, GFP_NOFS);
btrfs_release_path(path);
goto out;
}
}
+
+ BTRFS_I(inode)->generation = trans->transid;
header = btrfs_item_ptr(leaf, path->slots[0],
struct btrfs_free_space_header);
btrfs_set_free_space_entries(leaf, header, entries);
btrfs_mark_buffer_dirty(leaf);
btrfs_release_path(path);
- ret = 1;
-
+ err = 0;
out:
- kfree(pages);
- if (ret != 1) {
- invalidate_inode_pages2_range(inode->i_mapping, 0, index);
+ io_ctl_free(&io_ctl);
+ if (err) {
+ invalidate_inode_pages2(inode->i_mapping);
BTRFS_I(inode)->generation = 0;
}
btrfs_update_inode(trans, root, inode);
- return ret;
+ return err;
+
+out_nospc:
+ list_for_each_safe(pos, n, &bitmap_list) {
+ struct btrfs_free_space *entry =
+ list_entry(pos, struct btrfs_free_space, list);
+ list_del_init(&entry->list);
+ }
+ io_ctl_drop_pages(&io_ctl);
+ unlock_extent_cached(&BTRFS_I(inode)->io_tree, 0,
+ i_size_read(inode) - 1, &cached_state, GFP_NOFS);
+ goto out;
}
int btrfs_write_out_cache(struct btrfs_root *root,
ret = __btrfs_write_out_cache(root, inode, ctl, block_group, trans,
path, block_group->key.objectid);
- if (ret < 0) {
+ if (ret) {
spin_lock(&block_group->lock);
block_group->disk_cache_state = BTRFS_DC_ERROR;
spin_unlock(&block_group->lock);
ret = 0;
-
+#ifdef DEBUG
printk(KERN_ERR "btrfs: failed to write free space cace "
"for block group %llu\n", block_group->key.objectid);
+#endif
}
iput(inode);
ctl->total_bitmaps--;
}
kmem_cache_free(btrfs_free_space_cachep, info);
+ ret = 0;
goto out_lock;
}
unlink_free_space(ctl, info);
info->offset += bytes;
info->bytes -= bytes;
- link_free_space(ctl, info);
+ ret = link_free_space(ctl, info);
+ WARN_ON(ret);
goto out_lock;
}
spin_unlock(&ctl->tree_lock);
if (bytes >= minlen) {
- int update_ret;
- update_ret = btrfs_update_reserved_bytes(block_group,
- bytes, 1, 1);
+ struct btrfs_space_info *space_info;
+ int update = 0;
+
+ space_info = block_group->space_info;
+ spin_lock(&space_info->lock);
+ spin_lock(&block_group->lock);
+ if (!block_group->ro) {
+ block_group->reserved += bytes;
+ space_info->bytes_reserved += bytes;
+ update = 1;
+ }
+ spin_unlock(&block_group->lock);
+ spin_unlock(&space_info->lock);
ret = btrfs_error_discard_extent(fs_info->extent_root,
start,
&actually_trimmed);
btrfs_add_free_space(block_group, start, bytes);
- if (!update_ret)
- btrfs_update_reserved_bytes(block_group,
- bytes, 0, 1);
+ if (update) {
+ spin_lock(&space_info->lock);
+ spin_lock(&block_group->lock);
+ if (block_group->ro)
+ space_info->bytes_readonly += bytes;
+ block_group->reserved -= bytes;
+ space_info->bytes_reserved -= bytes;
+ spin_unlock(&space_info->lock);
+ spin_unlock(&block_group->lock);
+ }
if (ret)
break;
return 0;
ret = __btrfs_write_out_cache(root, inode, ctl, NULL, trans, path, 0);
- if (ret < 0)
+ if (ret) {
+ btrfs_delalloc_release_metadata(inode, inode->i_size);
+#ifdef DEBUG
printk(KERN_ERR "btrfs: failed to write free ino cache "
"for root %llu\n", root->root_key.objectid);
+#endif
+ }
iput(inode);
return ret;
struct btrfs_free_space_ctl *ctl = root->free_ino_ctl;
struct btrfs_path *path;
struct inode *inode;
+ struct btrfs_block_rsv *rsv;
+ u64 num_bytes;
u64 alloc_hint = 0;
int ret;
int prealloc;
if (!path)
return -ENOMEM;
+ rsv = trans->block_rsv;
+ trans->block_rsv = &root->fs_info->trans_block_rsv;
+
+ num_bytes = trans->bytes_reserved;
+ /*
+ * 1 item for inode item insertion if need
+ * 3 items for inode item update (in the worst case)
+ * 1 item for free space object
+ * 3 items for pre-allocation
+ */
+ trans->bytes_reserved = btrfs_calc_trans_metadata_size(root, 8);
+ ret = btrfs_block_rsv_add_noflush(root, trans->block_rsv,
+ trans->bytes_reserved);
+ if (ret)
+ goto out;
again:
inode = lookup_free_ino_inode(root, path);
if (IS_ERR(inode) && PTR_ERR(inode) != -ENOENT) {
ret = PTR_ERR(inode);
- goto out;
+ goto out_release;
}
if (IS_ERR(inode)) {
ret = create_free_ino_inode(root, trans, path);
if (ret)
- goto out;
+ goto out_release;
goto again;
}
/* Just to make sure we have enough space */
prealloc += 8 * PAGE_CACHE_SIZE;
- ret = btrfs_check_data_free_space(inode, prealloc);
+ ret = btrfs_delalloc_reserve_space(inode, prealloc);
if (ret)
goto out_put;
ret = btrfs_prealloc_file_range_trans(inode, trans, 0, 0, prealloc,
prealloc, prealloc, &alloc_hint);
- if (ret)
+ if (ret) {
+ btrfs_delalloc_release_space(inode, prealloc);
goto out_put;
+ }
btrfs_free_reserved_data_space(inode, prealloc);
+ ret = btrfs_write_out_ino_cache(root, trans, path);
out_put:
iput(inode);
+out_release:
+ btrfs_block_rsv_release(root, trans->block_rsv, trans->bytes_reserved);
out:
- if (ret == 0)
- ret = btrfs_write_out_ino_cache(root, trans, path);
+ trans->block_rsv = rsv;
+ trans->bytes_reserved = num_bytes;
btrfs_free_path(path);
return ret;
#include "btrfs_inode.h"
#include "ioctl.h"
#include "print-tree.h"
-#include "volumes.h"
#include "ordered-data.h"
#include "xattr.h"
#include "tree-log.h"
+#include "volumes.h"
#include "compression.h"
#include "locking.h"
#include "free-space-cache.h"
struct page *locked_page,
u64 start, u64 end, int *page_started,
unsigned long *nr_written, int unlock);
+static noinline int btrfs_update_inode_fallback(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root, struct inode *inode);
static int btrfs_init_inode_security(struct btrfs_trans_handle *trans,
struct inode *inode, struct inode *dir,
(BTRFS_I(inode)->flags & BTRFS_INODE_COMPRESS))) {
WARN_ON(pages);
pages = kzalloc(sizeof(struct page *) * nr_pages, GFP_NOFS);
- BUG_ON(!pages);
+ if (!pages) {
+ /* just bail out to the uncompressed code */
+ goto cont;
+ }
if (BTRFS_I(inode)->force_compress)
compress_type = BTRFS_I(inode)->force_compress;
will_compress = 1;
}
}
+cont:
if (start == 0) {
trans = btrfs_join_transaction(root);
BUG_ON(IS_ERR(trans));
}
BUG_ON(disk_num_bytes >
- btrfs_super_total_bytes(&root->fs_info->super_copy));
+ btrfs_super_total_bytes(root->fs_info->super_copy));
alloc_hint = get_extent_allocation_hint(inode, start, num_bytes);
btrfs_drop_extent_cache(inode, start, start + num_bytes - 1, 0);
trans = btrfs_join_transaction(root);
BUG_ON(IS_ERR(trans));
trans->block_rsv = &root->fs_info->delalloc_block_rsv;
- ret = btrfs_update_inode(trans, root, inode);
+ ret = btrfs_update_inode_fallback(trans, root, inode);
BUG_ON(ret);
}
goto out;
ret = btrfs_ordered_update_i_size(inode, 0, ordered_extent);
if (!ret || !test_bit(BTRFS_ORDERED_PREALLOC, &ordered_extent->flags)) {
- ret = btrfs_update_inode(trans, root, inode);
+ ret = btrfs_update_inode_fallback(trans, root, inode);
BUG_ON(ret);
}
ret = 0;
out:
- if (nolock) {
- if (trans)
- btrfs_end_transaction_nolock(trans, root);
- } else {
+ if (root != root->fs_info->tree_root)
btrfs_delalloc_release_metadata(inode, ordered_extent->len);
- if (trans)
+ if (trans) {
+ if (nolock)
+ btrfs_end_transaction_nolock(trans, root);
+ else
btrfs_end_transaction(trans, root);
}
return btrfs_finish_ordered_io(page->mapping->host, start, end);
}
-/*
- * When IO fails, either with EIO or csum verification fails, we
- * try other mirrors that might have a good copy of the data. This
- * io_failure_record is used to record state as we go through all the
- * mirrors. If another mirror has good data, the page is set up to date
- * and things continue. If a good mirror can't be found, the original
- * bio end_io callback is called to indicate things have failed.
- */
-struct io_failure_record {
- struct page *page;
- u64 start;
- u64 len;
- u64 logical;
- unsigned long bio_flags;
- int last_mirror;
-};
-
-static int btrfs_io_failed_hook(struct bio *failed_bio,
- struct page *page, u64 start, u64 end,
- struct extent_state *state)
-{
- struct io_failure_record *failrec = NULL;
- u64 private;
- struct extent_map *em;
- struct inode *inode = page->mapping->host;
- struct extent_io_tree *failure_tree = &BTRFS_I(inode)->io_failure_tree;
- struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree;
- struct bio *bio;
- int num_copies;
- int ret;
- int rw;
- u64 logical;
-
- ret = get_state_private(failure_tree, start, &private);
- if (ret) {
- failrec = kmalloc(sizeof(*failrec), GFP_NOFS);
- if (!failrec)
- return -ENOMEM;
- failrec->start = start;
- failrec->len = end - start + 1;
- failrec->last_mirror = 0;
- failrec->bio_flags = 0;
-
- read_lock(&em_tree->lock);
- em = lookup_extent_mapping(em_tree, start, failrec->len);
- if (em->start > start || em->start + em->len < start) {
- free_extent_map(em);
- em = NULL;
- }
- read_unlock(&em_tree->lock);
-
- if (IS_ERR_OR_NULL(em)) {
- kfree(failrec);
- return -EIO;
- }
- logical = start - em->start;
- logical = em->block_start + logical;
- if (test_bit(EXTENT_FLAG_COMPRESSED, &em->flags)) {
- logical = em->block_start;
- failrec->bio_flags = EXTENT_BIO_COMPRESSED;
- extent_set_compress_type(&failrec->bio_flags,
- em->compress_type);
- }
- failrec->logical = logical;
- free_extent_map(em);
- set_extent_bits(failure_tree, start, end, EXTENT_LOCKED |
- EXTENT_DIRTY, GFP_NOFS);
- set_state_private(failure_tree, start,
- (u64)(unsigned long)failrec);
- } else {
- failrec = (struct io_failure_record *)(unsigned long)private;
- }
- num_copies = btrfs_num_copies(
- &BTRFS_I(inode)->root->fs_info->mapping_tree,
- failrec->logical, failrec->len);
- failrec->last_mirror++;
- if (!state) {
- spin_lock(&BTRFS_I(inode)->io_tree.lock);
- state = find_first_extent_bit_state(&BTRFS_I(inode)->io_tree,
- failrec->start,
- EXTENT_LOCKED);
- if (state && state->start != failrec->start)
- state = NULL;
- spin_unlock(&BTRFS_I(inode)->io_tree.lock);
- }
- if (!state || failrec->last_mirror > num_copies) {
- set_state_private(failure_tree, failrec->start, 0);
- clear_extent_bits(failure_tree, failrec->start,
- failrec->start + failrec->len - 1,
- EXTENT_LOCKED | EXTENT_DIRTY, GFP_NOFS);
- kfree(failrec);
- return -EIO;
- }
- bio = bio_alloc(GFP_NOFS, 1);
- bio->bi_private = state;
- bio->bi_end_io = failed_bio->bi_end_io;
- bio->bi_sector = failrec->logical >> 9;
- bio->bi_bdev = failed_bio->bi_bdev;
- bio->bi_size = 0;
-
- bio_add_page(bio, page, failrec->len, start - page_offset(page));
- if (failed_bio->bi_rw & REQ_WRITE)
- rw = WRITE;
- else
- rw = READ;
-
- ret = BTRFS_I(inode)->io_tree.ops->submit_bio_hook(inode, rw, bio,
- failrec->last_mirror,
- failrec->bio_flags, 0);
- return ret;
-}
-
-/*
- * each time an IO finishes, we do a fast check in the IO failure tree
- * to see if we need to process or clean up an io_failure_record
- */
-static int btrfs_clean_io_failures(struct inode *inode, u64 start)
-{
- u64 private;
- u64 private_failure;
- struct io_failure_record *failure;
- int ret;
-
- private = 0;
- if (count_range_bits(&BTRFS_I(inode)->io_failure_tree, &private,
- (u64)-1, 1, EXTENT_DIRTY, 0)) {
- ret = get_state_private(&BTRFS_I(inode)->io_failure_tree,
- start, &private_failure);
- if (ret == 0) {
- failure = (struct io_failure_record *)(unsigned long)
- private_failure;
- set_state_private(&BTRFS_I(inode)->io_failure_tree,
- failure->start, 0);
- clear_extent_bits(&BTRFS_I(inode)->io_failure_tree,
- failure->start,
- failure->start + failure->len - 1,
- EXTENT_DIRTY | EXTENT_LOCKED,
- GFP_NOFS);
- kfree(failure);
- }
- }
- return 0;
-}
-
/*
* when reads are done, we need to check csums to verify the data is correct
- * if there's a match, we allow the bio to finish. If not, we go through
- * the io_failure_record routines to find good copies
+ * if there's a match, we allow the bio to finish. If not, the code in
+ * extent_io.c will try to find good copies for us.
*/
static int btrfs_readpage_end_io_hook(struct page *page, u64 start, u64 end,
struct extent_state *state)
kunmap_atomic(kaddr, KM_USER0);
good:
- /* if the io failure tree for this inode is non-empty,
- * check to see if we've recovered from a failed IO
- */
- btrfs_clean_io_failures(inode, start);
return 0;
zeroit:
up_read(&root->fs_info->cleanup_work_sem);
}
-/*
- * calculate extra metadata reservation when snapshotting a subvolume
- * contains orphan files.
- */
-void btrfs_orphan_pre_snapshot(struct btrfs_trans_handle *trans,
- struct btrfs_pending_snapshot *pending,
- u64 *bytes_to_reserve)
-{
- struct btrfs_root *root;
- struct btrfs_block_rsv *block_rsv;
- u64 num_bytes;
- int index;
-
- root = pending->root;
- if (!root->orphan_block_rsv || list_empty(&root->orphan_list))
- return;
-
- block_rsv = root->orphan_block_rsv;
-
- /* orphan block reservation for the snapshot */
- num_bytes = block_rsv->size;
-
- /*
- * after the snapshot is created, COWing tree blocks may use more
- * space than it frees. So we should make sure there is enough
- * reserved space.
- */
- index = trans->transid & 0x1;
- if (block_rsv->reserved + block_rsv->freed[index] < block_rsv->size) {
- num_bytes += block_rsv->size -
- (block_rsv->reserved + block_rsv->freed[index]);
- }
-
- *bytes_to_reserve += num_bytes;
-}
-
-void btrfs_orphan_post_snapshot(struct btrfs_trans_handle *trans,
- struct btrfs_pending_snapshot *pending)
-{
- struct btrfs_root *root = pending->root;
- struct btrfs_root *snap = pending->snap;
- struct btrfs_block_rsv *block_rsv;
- u64 num_bytes;
- int index;
- int ret;
-
- if (!root->orphan_block_rsv || list_empty(&root->orphan_list))
- return;
-
- /* refill source subvolume's orphan block reservation */
- block_rsv = root->orphan_block_rsv;
- index = trans->transid & 0x1;
- if (block_rsv->reserved + block_rsv->freed[index] < block_rsv->size) {
- num_bytes = block_rsv->size -
- (block_rsv->reserved + block_rsv->freed[index]);
- ret = btrfs_block_rsv_migrate(&pending->block_rsv,
- root->orphan_block_rsv,
- num_bytes);
- BUG_ON(ret);
- }
-
- /* setup orphan block reservation for the snapshot */
- block_rsv = btrfs_alloc_block_rsv(snap);
- BUG_ON(!block_rsv);
-
- btrfs_add_durable_block_rsv(root->fs_info, block_rsv);
- snap->orphan_block_rsv = block_rsv;
-
- num_bytes = root->orphan_block_rsv->size;
- ret = btrfs_block_rsv_migrate(&pending->block_rsv,
- block_rsv, num_bytes);
- BUG_ON(ret);
-
-#if 0
- /* insert orphan item for the snapshot */
- WARN_ON(!root->orphan_item_inserted);
- ret = btrfs_insert_orphan_item(trans, root->fs_info->tree_root,
- snap->root_key.objectid);
- BUG_ON(ret);
- snap->orphan_item_inserted = 1;
-#endif
-}
-
enum btrfs_orphan_cleanup_state {
ORPHAN_CLEANUP_STARTED = 1,
ORPHAN_CLEANUP_DONE = 2,
}
spin_unlock(&root->orphan_lock);
- if (block_rsv)
- btrfs_add_durable_block_rsv(root->fs_info, block_rsv);
-
/* grab metadata reservation from transaction handle */
if (reserve) {
ret = btrfs_orphan_reserve_metadata(trans, inode);
struct btrfs_key key, found_key;
struct btrfs_trans_handle *trans;
struct inode *inode;
+ u64 last_objectid = 0;
int ret = 0, nr_unlink = 0, nr_truncate = 0;
if (cmpxchg(&root->orphan_cleanup_state, 0, ORPHAN_CLEANUP_STARTED))
* crossing root thing. we store the inode number in the
* offset of the orphan item.
*/
+
+ if (found_key.offset == last_objectid) {
+ printk(KERN_ERR "btrfs: Error removing orphan entry, "
+ "stopping orphan cleanup\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ last_objectid = found_key.offset;
+
found_key.objectid = found_key.offset;
found_key.type = BTRFS_INODE_ITEM_KEY;
found_key.offset = 0;
inode = btrfs_iget(root->fs_info->sb, &found_key, root, NULL);
- if (IS_ERR(inode)) {
- ret = PTR_ERR(inode);
+ ret = PTR_RET(inode);
+ if (ret && ret != -ESTALE)
goto out;
- }
/*
- * add this inode to the orphan list so btrfs_orphan_del does
- * the proper thing when we hit it
+ * Inode is already gone but the orphan item is still there,
+ * kill the orphan item.
*/
- spin_lock(&root->orphan_lock);
- list_add(&BTRFS_I(inode)->i_orphan, &root->orphan_list);
- spin_unlock(&root->orphan_lock);
-
- /*
- * if this is a bad inode, means we actually succeeded in
- * removing the inode, but not the orphan record, which means
- * we need to manually delete the orphan since iput will just
- * do a destroy_inode
- */
- if (is_bad_inode(inode)) {
- trans = btrfs_start_transaction(root, 0);
+ if (ret == -ESTALE) {
+ trans = btrfs_start_transaction(root, 1);
if (IS_ERR(trans)) {
ret = PTR_ERR(trans);
goto out;
}
- btrfs_orphan_del(trans, inode);
+ ret = btrfs_del_orphan_item(trans, root,
+ found_key.objectid);
+ BUG_ON(ret);
btrfs_end_transaction(trans, root);
- iput(inode);
continue;
}
+ /*
+ * add this inode to the orphan list so btrfs_orphan_del does
+ * the proper thing when we hit it
+ */
+ spin_lock(&root->orphan_lock);
+ list_add(&BTRFS_I(inode)->i_orphan, &root->orphan_list);
+ spin_unlock(&root->orphan_lock);
+
/* if we have links, this was a truncate, lets do that */
if (inode->i_nlink) {
if (!S_ISREG(inode->i_mode)) {
if (ret)
goto out;
}
+ /* release the path since we're done with it */
+ btrfs_release_path(path);
+
root->orphan_cleanup_state = ORPHAN_CLEANUP_DONE;
if (root->orphan_block_rsv)
/*
* copy everything in the in-memory inode into the btree.
*/
-noinline int btrfs_update_inode(struct btrfs_trans_handle *trans,
+static noinline int btrfs_update_inode_item(struct btrfs_trans_handle *trans,
struct btrfs_root *root, struct inode *inode)
{
struct btrfs_inode_item *inode_item;
struct extent_buffer *leaf;
int ret;
- /*
- * If the inode is a free space inode, we can deadlock during commit
- * if we put it into the delayed code.
- *
- * The data relocation inode should also be directly updated
- * without delay
- */
- if (!btrfs_is_free_space_inode(root, inode)
- && root->root_key.objectid != BTRFS_DATA_RELOC_TREE_OBJECTID) {
- ret = btrfs_delayed_update_inode(trans, root, inode);
- if (!ret)
- btrfs_set_inode_last_trans(trans, inode);
- return ret;
- }
-
path = btrfs_alloc_path();
if (!path)
return -ENOMEM;
return ret;
}
+/*
+ * copy everything in the in-memory inode into the btree.
+ */
+noinline int btrfs_update_inode(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root, struct inode *inode)
+{
+ int ret;
+
+ /*
+ * If the inode is a free space inode, we can deadlock during commit
+ * if we put it into the delayed code.
+ *
+ * The data relocation inode should also be directly updated
+ * without delay
+ */
+ if (!btrfs_is_free_space_inode(root, inode)
+ && root->root_key.objectid != BTRFS_DATA_RELOC_TREE_OBJECTID) {
+ ret = btrfs_delayed_update_inode(trans, root, inode);
+ if (!ret)
+ btrfs_set_inode_last_trans(trans, inode);
+ return ret;
+ }
+
+ return btrfs_update_inode_item(trans, root, inode);
+}
+
+static noinline int btrfs_update_inode_fallback(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root, struct inode *inode)
+{
+ int ret;
+
+ ret = btrfs_update_inode(trans, root, inode);
+ if (ret == -ENOSPC)
+ return btrfs_update_inode_item(trans, root, inode);
+ return ret;
+}
+
/*
* unlink helper that gets used here in inode.c and in the tree logging
* recovery code. It remove a link in a directory with a given name, and
u64 ino = btrfs_ino(inode);
u64 dir_ino = btrfs_ino(dir);
- trans = btrfs_start_transaction(root, 10);
+ /*
+ * 1 for the possible orphan item
+ * 1 for the dir item
+ * 1 for the dir index
+ * 1 for the inode ref
+ * 1 for the inode ref in the tree log
+ * 2 for the dir entries in the log
+ * 1 for the inode
+ */
+ trans = btrfs_start_transaction(root, 8);
if (!IS_ERR(trans) || PTR_ERR(trans) != -ENOSPC)
return trans;
return ERR_PTR(-ENOMEM);
}
- trans = btrfs_start_transaction(root, 0);
+ /* 1 for the orphan item */
+ trans = btrfs_start_transaction(root, 1);
if (IS_ERR(trans)) {
btrfs_free_path(path);
root->fs_info->enospc_unlink = 0;
err = 0;
out:
btrfs_free_path(path);
+ /* Migrate the orphan reservation over */
+ if (!err)
+ err = btrfs_block_rsv_migrate(trans->block_rsv,
+ &root->fs_info->global_block_rsv,
+ trans->bytes_reserved);
+
if (err) {
btrfs_end_transaction(trans, root);
root->fs_info->enospc_unlink = 0;
struct btrfs_root *root)
{
if (trans->block_rsv == &root->fs_info->global_block_rsv) {
+ btrfs_block_rsv_release(root, trans->block_rsv,
+ trans->bytes_reserved);
+ trans->block_rsv = &root->fs_info->trans_block_rsv;
BUG_ON(!root->fs_info->enospc_unlink);
root->fs_info->enospc_unlink = 0;
}
pgoff_t index = from >> PAGE_CACHE_SHIFT;
unsigned offset = from & (PAGE_CACHE_SIZE-1);
struct page *page;
+ gfp_t mask = btrfs_alloc_write_mask(mapping);
int ret = 0;
u64 page_start;
u64 page_end;
ret = -ENOMEM;
again:
- page = find_or_create_page(mapping, index, GFP_NOFS);
+ page = find_or_create_page(mapping, index, mask);
if (!page) {
btrfs_delalloc_release_space(inode, PAGE_CACHE_SIZE);
goto out;
{
struct btrfs_trans_handle *trans;
struct btrfs_root *root = BTRFS_I(inode)->root;
+ struct btrfs_block_rsv *rsv, *global_rsv;
+ u64 min_size = btrfs_calc_trunc_metadata_size(root, 1);
unsigned long nr;
int ret;
goto no_delete;
}
+ rsv = btrfs_alloc_block_rsv(root);
+ if (!rsv) {
+ btrfs_orphan_del(NULL, inode);
+ goto no_delete;
+ }
+ rsv->size = min_size;
+ global_rsv = &root->fs_info->global_block_rsv;
+
btrfs_i_size_write(inode, 0);
+ /*
+ * This is a bit simpler than btrfs_truncate since
+ *
+ * 1) We've already reserved our space for our orphan item in the
+ * unlink.
+ * 2) We're going to delete the inode item, so we don't need to update
+ * it at all.
+ *
+ * So we just need to reserve some slack space in case we add bytes when
+ * doing the truncate.
+ */
while (1) {
- trans = btrfs_join_transaction(root);
- BUG_ON(IS_ERR(trans));
- trans->block_rsv = root->orphan_block_rsv;
+ ret = btrfs_block_rsv_refill(root, rsv, min_size);
+
+ /*
+ * Try and steal from the global reserve since we will
+ * likely not use this space anyway, we want to try as
+ * hard as possible to get this to work.
+ */
+ if (ret)
+ ret = btrfs_block_rsv_migrate(global_rsv, rsv, min_size);
- ret = btrfs_block_rsv_check(trans, root,
- root->orphan_block_rsv, 0, 5);
if (ret) {
- BUG_ON(ret != -EAGAIN);
- ret = btrfs_commit_transaction(trans, root);
- BUG_ON(ret);
- continue;
+ printk(KERN_WARNING "Could not get space for a "
+ "delete, will truncate on mount %d\n", ret);
+ btrfs_orphan_del(NULL, inode);
+ btrfs_free_block_rsv(root, rsv);
+ goto no_delete;
}
+ trans = btrfs_start_transaction(root, 0);
+ if (IS_ERR(trans)) {
+ btrfs_orphan_del(NULL, inode);
+ btrfs_free_block_rsv(root, rsv);
+ goto no_delete;
+ }
+
+ trans->block_rsv = rsv;
+
ret = btrfs_truncate_inode_items(trans, root, inode, 0, 0);
if (ret != -EAGAIN)
break;
btrfs_end_transaction(trans, root);
trans = NULL;
btrfs_btree_balance_dirty(root, nr);
-
}
+ btrfs_free_block_rsv(root, rsv);
+
if (ret == 0) {
+ trans->block_rsv = root->orphan_block_rsv;
ret = btrfs_orphan_del(trans, inode);
BUG_ON(ret);
}
+ trans->block_rsv = &root->fs_info->trans_block_rsv;
if (!(root == root->fs_info->tree_root ||
root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID))
btrfs_return_ino(root, btrfs_ino(inode));
if (test_bit(BTRFS_ORDERED_NOCOW, &ordered->flags)) {
ret = btrfs_ordered_update_i_size(inode, 0, ordered);
if (!ret)
- ret = btrfs_update_inode(trans, root, inode);
- err = ret;
+ err = btrfs_update_inode_fallback(trans, root, inode);
goto out;
}
add_pending_csums(trans, inode, ordered->file_offset, &ordered->list);
ret = btrfs_ordered_update_i_size(inode, 0, ordered);
if (!ret || !test_bit(BTRFS_ORDERED_PREALLOC, &ordered->flags))
- btrfs_update_inode(trans, root, inode);
+ btrfs_update_inode_fallback(trans, root, inode);
ret = 0;
out_unlock:
unlock_extent_cached(&BTRFS_I(inode)->io_tree, ordered->file_offset,
{
struct extent_io_tree *tree;
tree = &BTRFS_I(page->mapping->host)->io_tree;
- return extent_read_full_page(tree, page, btrfs_get_extent);
+ return extent_read_full_page(tree, page, btrfs_get_extent, 0);
}
static int btrfs_writepage(struct page *page, struct writeback_control *wbc)
struct btrfs_trans_handle *trans;
unsigned long nr;
u64 mask = root->sectorsize - 1;
+ u64 min_size = btrfs_calc_trunc_metadata_size(root, 1);
ret = btrfs_truncate_page(inode->i_mapping, inode->i_size);
if (ret)
rsv = btrfs_alloc_block_rsv(root);
if (!rsv)
return -ENOMEM;
- btrfs_add_durable_block_rsv(root->fs_info, rsv);
+ rsv->size = min_size;
+ /*
+ * 1 for the truncate slack space
+ * 1 for the orphan item we're going to add
+ * 1 for the orphan item deletion
+ * 1 for updating the inode.
+ */
trans = btrfs_start_transaction(root, 4);
if (IS_ERR(trans)) {
err = PTR_ERR(trans);
goto out;
}
- /*
- * Reserve space for the truncate process. Truncate should be adding
- * space, but if there are snapshots it may end up using space.
- */
- ret = btrfs_truncate_reserve_metadata(trans, root, rsv);
+ /* Migrate the slack space for the truncate to our reserve */
+ ret = btrfs_block_rsv_migrate(&root->fs_info->trans_block_rsv, rsv,
+ min_size);
BUG_ON(ret);
ret = btrfs_orphan_add(trans, inode);
goto out;
}
- nr = trans->blocks_used;
- btrfs_end_transaction(trans, root);
- btrfs_btree_balance_dirty(root, nr);
-
- /*
- * Ok so we've already migrated our bytes over for the truncate, so here
- * just reserve the one slot we need for updating the inode.
- */
- trans = btrfs_start_transaction(root, 1);
- if (IS_ERR(trans)) {
- err = PTR_ERR(trans);
- goto out;
- }
- trans->block_rsv = rsv;
-
/*
* setattr is responsible for setting the ordered_data_close flag,
* but that is only tested during the last file release. That
btrfs_add_ordered_operation(trans, root, inode);
while (1) {
+ ret = btrfs_block_rsv_refill(root, rsv, min_size);
+ if (ret) {
+ /*
+ * This can only happen with the original transaction we
+ * started above, every other time we shouldn't have a
+ * transaction started yet.
+ */
+ if (ret == -EAGAIN)
+ goto end_trans;
+ err = ret;
+ break;
+ }
+
if (!trans) {
- trans = btrfs_start_transaction(root, 3);
+ /* Just need the 1 for updating the inode */
+ trans = btrfs_start_transaction(root, 1);
if (IS_ERR(trans)) {
err = PTR_ERR(trans);
goto out;
}
-
- ret = btrfs_truncate_reserve_metadata(trans, root,
- rsv);
- BUG_ON(ret);
-
- trans->block_rsv = rsv;
}
+ trans->block_rsv = rsv;
+
ret = btrfs_truncate_inode_items(trans, root, inode,
inode->i_size,
BTRFS_EXTENT_DATA_KEY);
err = ret;
break;
}
-
+end_trans:
nr = trans->blocks_used;
btrfs_end_transaction(trans, root);
trans = NULL;
ret = btrfs_orphan_del(NULL, inode);
}
- trans->block_rsv = &root->fs_info->trans_block_rsv;
- ret = btrfs_update_inode(trans, root, inode);
- if (ret && !err)
- err = ret;
+ if (trans) {
+ trans->block_rsv = &root->fs_info->trans_block_rsv;
+ ret = btrfs_update_inode(trans, root, inode);
+ if (ret && !err)
+ err = ret;
- nr = trans->blocks_used;
- ret = btrfs_end_transaction_throttle(trans, root);
- btrfs_btree_balance_dirty(root, nr);
+ nr = trans->blocks_used;
+ ret = btrfs_end_transaction_throttle(trans, root);
+ btrfs_btree_balance_dirty(root, nr);
+ }
out:
btrfs_free_block_rsv(root, rsv);
ei->last_sub_trans = 0;
ei->logged_trans = 0;
ei->delalloc_bytes = 0;
- ei->reserved_bytes = 0;
ei->disk_i_size = 0;
ei->flags = 0;
+ ei->csum_bytes = 0;
ei->index_cnt = (u64)-1;
ei->last_unlink_trans = 0;
ei->orphan_meta_reserved = 0;
ei->dummy_inode = 0;
ei->in_defrag = 0;
+ ei->delalloc_meta_reserved = 0;
ei->force_compress = BTRFS_COMPRESS_NONE;
ei->delayed_node = NULL;
WARN_ON(inode->i_data.nrpages);
WARN_ON(BTRFS_I(inode)->outstanding_extents);
WARN_ON(BTRFS_I(inode)->reserved_extents);
+ WARN_ON(BTRFS_I(inode)->delalloc_bytes);
+ WARN_ON(BTRFS_I(inode)->csum_bytes);
/*
* This can happen where we create an inode, but somebody else also
.readpage_end_io_hook = btrfs_readpage_end_io_hook,
.writepage_end_io_hook = btrfs_writepage_end_io_hook,
.writepage_start_hook = btrfs_writepage_start_hook,
- .readpage_io_failed_hook = btrfs_io_failed_hook,
.set_bit_hook = btrfs_set_bit_hook,
.clear_bit_hook = btrfs_clear_bit_hook,
.merge_extent_hook = btrfs_merge_extent_hook,
#include "volumes.h"
#include "locking.h"
#include "inode-map.h"
+#include "backref.h"
/* Mask out flags that are inappropriate for the given type of inode. */
static inline __u32 btrfs_mask_flags(umode_t mode, __u32 flags)
/*
* Inherit flags from the parent inode.
*
- * Unlike extN we don't have any flags we don't want to inherit currently.
+ * Currently only the compression flags and the cow flags are inherited.
*/
void btrfs_inherit_iflags(struct inode *inode, struct inode *dir)
{
flags = BTRFS_I(dir)->flags;
- if (S_ISREG(inode->i_mode))
- flags &= ~BTRFS_INODE_DIRSYNC;
- else if (!S_ISDIR(inode->i_mode))
- flags &= (BTRFS_INODE_NODUMP | BTRFS_INODE_NOATIME);
+ if (flags & BTRFS_INODE_NOCOMPRESS) {
+ BTRFS_I(inode)->flags &= ~BTRFS_INODE_COMPRESS;
+ BTRFS_I(inode)->flags |= BTRFS_INODE_NOCOMPRESS;
+ } else if (flags & BTRFS_INODE_COMPRESS) {
+ BTRFS_I(inode)->flags &= ~BTRFS_INODE_NOCOMPRESS;
+ BTRFS_I(inode)->flags |= BTRFS_INODE_COMPRESS;
+ }
+
+ if (flags & BTRFS_INODE_NODATACOW)
+ BTRFS_I(inode)->flags |= BTRFS_INODE_NODATACOW;
- BTRFS_I(inode)->flags = flags;
btrfs_update_iflags(inode);
}
struct fstrim_range range;
u64 minlen = ULLONG_MAX;
u64 num_devices = 0;
+ u64 total_bytes = btrfs_super_total_bytes(root->fs_info->super_copy);
int ret;
if (!capable(CAP_SYS_ADMIN))
}
}
rcu_read_unlock();
+
if (!num_devices)
return -EOPNOTSUPP;
-
if (copy_from_user(&range, arg, sizeof(range)))
return -EFAULT;
+ if (range.start > total_bytes)
+ return -EINVAL;
+ range.len = min(range.len, total_bytes - range.start);
range.minlen = max(range.minlen, minlen);
ret = btrfs_trim_fs(root, &range);
if (ret < 0)
int ret = 1;
/*
- * make sure that once we start defragging and extent, we keep on
+ * make sure that once we start defragging an extent, we keep on
* defragging it
*/
if (start < *defrag_end)
* extent will force at least part of that big extent to be defragged.
*/
if (ret) {
- *last_len += len;
*defrag_end = extent_map_end(em);
} else {
*last_len = 0;
int i_done;
struct btrfs_ordered_extent *ordered;
struct extent_state *cached_state = NULL;
+ gfp_t mask = btrfs_alloc_write_mask(inode->i_mapping);
if (isize == 0)
return 0;
for (i = 0; i < num_pages; i++) {
struct page *page;
page = find_or_create_page(inode->i_mapping,
- start_index + i, GFP_NOFS);
+ start_index + i, mask);
if (!page)
break;
struct btrfs_super_block *disk_super;
struct file_ra_state *ra = NULL;
unsigned long last_index;
+ u64 isize = i_size_read(inode);
u64 features;
u64 last_len = 0;
u64 skip = 0;
u64 defrag_end = 0;
u64 newer_off = range->start;
- int newer_left = 0;
unsigned long i;
+ unsigned long ra_index = 0;
int ret;
int defrag_count = 0;
int compress_type = BTRFS_COMPRESS_ZLIB;
int extent_thresh = range->extent_thresh;
- int newer_cluster = (256 * 1024) >> PAGE_CACHE_SHIFT;
+ int max_cluster = (256 * 1024) >> PAGE_CACHE_SHIFT;
+ int cluster = max_cluster;
u64 new_align = ~((u64)128 * 1024 - 1);
struct page **pages = NULL;
compress_type = range->compress_type;
}
- if (inode->i_size == 0)
+ if (isize == 0)
return 0;
/*
ra = &file->f_ra;
}
- pages = kmalloc(sizeof(struct page *) * newer_cluster,
+ pages = kmalloc(sizeof(struct page *) * max_cluster,
GFP_NOFS);
if (!pages) {
ret = -ENOMEM;
/* find the last page to defrag */
if (range->start + range->len > range->start) {
- last_index = min_t(u64, inode->i_size - 1,
+ last_index = min_t(u64, isize - 1,
range->start + range->len - 1) >> PAGE_CACHE_SHIFT;
} else {
- last_index = (inode->i_size - 1) >> PAGE_CACHE_SHIFT;
+ last_index = (isize - 1) >> PAGE_CACHE_SHIFT;
}
if (newer_than) {
* the extents in the file evenly spaced
*/
i = (newer_off & new_align) >> PAGE_CACHE_SHIFT;
- newer_left = newer_cluster;
} else
goto out_ra;
} else {
i = range->start >> PAGE_CACHE_SHIFT;
}
if (!max_to_defrag)
- max_to_defrag = last_index - 1;
+ max_to_defrag = last_index;
/*
* make writeback starts from i, so the defrag range can be
i = max(i + 1, next);
continue;
}
+
+ if (!newer_than) {
+ cluster = (PAGE_CACHE_ALIGN(defrag_end) >>
+ PAGE_CACHE_SHIFT) - i;
+ cluster = min(cluster, max_cluster);
+ } else {
+ cluster = max_cluster;
+ }
+
if (range->flags & BTRFS_DEFRAG_RANGE_COMPRESS)
BTRFS_I(inode)->force_compress = compress_type;
- btrfs_force_ra(inode->i_mapping, ra, file, i, newer_cluster);
+ if (i + cluster > ra_index) {
+ ra_index = max(i, ra_index);
+ btrfs_force_ra(inode->i_mapping, ra, file, ra_index,
+ cluster);
+ ra_index += max_cluster;
+ }
- ret = cluster_pages_for_defrag(inode, pages, i, newer_cluster);
+ ret = cluster_pages_for_defrag(inode, pages, i, cluster);
if (ret < 0)
goto out_ra;
defrag_count += ret;
balance_dirty_pages_ratelimited_nr(inode->i_mapping, ret);
- i += ret;
if (newer_than) {
if (newer_off == (u64)-1)
if (!ret) {
range->start = newer_off;
i = (newer_off & new_align) >> PAGE_CACHE_SHIFT;
- newer_left = newer_cluster;
} else {
break;
}
} else {
- i++;
+ if (ret > 0) {
+ i += ret;
+ last_len += ret << PAGE_CACHE_SHIFT;
+ } else {
+ i++;
+ last_len = 0;
+ }
}
}
mutex_unlock(&inode->i_mutex);
}
- disk_super = &root->fs_info->super_copy;
+ disk_super = root->fs_info->super_copy;
features = btrfs_super_incompat_flags(disk_super);
if (range->compress_type == BTRFS_COMPRESS_LZO) {
features |= BTRFS_FEATURE_INCOMPAT_COMPRESS_LZO;
btrfs_set_super_incompat_flags(disk_super, features);
}
- if (!file)
- kfree(ra);
- return defrag_count;
+ ret = defrag_count;
out_ra:
if (!file)
return PTR_ERR(trans);
}
- dir_id = btrfs_super_root_dir(&root->fs_info->super_copy);
+ dir_id = btrfs_super_root_dir(root->fs_info->super_copy);
di = btrfs_lookup_dir_item(trans, root->fs_info->tree_root, path,
dir_id, "default", 7, 1);
if (IS_ERR_OR_NULL(di)) {
btrfs_mark_buffer_dirty(path->nodes[0]);
btrfs_free_path(path);
- disk_super = &root->fs_info->super_copy;
+ disk_super = root->fs_info->super_copy;
features = btrfs_super_incompat_flags(disk_super);
if (!(features & BTRFS_FEATURE_INCOMPAT_DEFAULT_SUBVOL)) {
features |= BTRFS_FEATURE_INCOMPAT_DEFAULT_SUBVOL;
return ret;
}
+static long btrfs_ioctl_ino_to_path(struct btrfs_root *root, void __user *arg)
+{
+ int ret = 0;
+ int i;
+ u64 rel_ptr;
+ int size;
+ struct btrfs_ioctl_ino_path_args *ipa = NULL;
+ struct inode_fs_paths *ipath = NULL;
+ struct btrfs_path *path;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ path = btrfs_alloc_path();
+ if (!path) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ ipa = memdup_user(arg, sizeof(*ipa));
+ if (IS_ERR(ipa)) {
+ ret = PTR_ERR(ipa);
+ ipa = NULL;
+ goto out;
+ }
+
+ size = min_t(u32, ipa->size, 4096);
+ ipath = init_ipath(size, root, path);
+ if (IS_ERR(ipath)) {
+ ret = PTR_ERR(ipath);
+ ipath = NULL;
+ goto out;
+ }
+
+ ret = paths_from_inode(ipa->inum, ipath);
+ if (ret < 0)
+ goto out;
+
+ for (i = 0; i < ipath->fspath->elem_cnt; ++i) {
+ rel_ptr = ipath->fspath->val[i] - (u64)ipath->fspath->val;
+ ipath->fspath->val[i] = rel_ptr;
+ }
+
+ ret = copy_to_user((void *)ipa->fspath, (void *)ipath->fspath, size);
+ if (ret) {
+ ret = -EFAULT;
+ goto out;
+ }
+
+out:
+ btrfs_free_path(path);
+ free_ipath(ipath);
+ kfree(ipa);
+
+ return ret;
+}
+
+static int build_ino_list(u64 inum, u64 offset, u64 root, void *ctx)
+{
+ struct btrfs_data_container *inodes = ctx;
+ const size_t c = 3 * sizeof(u64);
+
+ if (inodes->bytes_left >= c) {
+ inodes->bytes_left -= c;
+ inodes->val[inodes->elem_cnt] = inum;
+ inodes->val[inodes->elem_cnt + 1] = offset;
+ inodes->val[inodes->elem_cnt + 2] = root;
+ inodes->elem_cnt += 3;
+ } else {
+ inodes->bytes_missing += c - inodes->bytes_left;
+ inodes->bytes_left = 0;
+ inodes->elem_missed += 3;
+ }
+
+ return 0;
+}
+
+static long btrfs_ioctl_logical_to_ino(struct btrfs_root *root,
+ void __user *arg)
+{
+ int ret = 0;
+ int size;
+ u64 extent_offset;
+ struct btrfs_ioctl_logical_ino_args *loi;
+ struct btrfs_data_container *inodes = NULL;
+ struct btrfs_path *path = NULL;
+ struct btrfs_key key;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ loi = memdup_user(arg, sizeof(*loi));
+ if (IS_ERR(loi)) {
+ ret = PTR_ERR(loi);
+ loi = NULL;
+ goto out;
+ }
+
+ path = btrfs_alloc_path();
+ if (!path) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ size = min_t(u32, loi->size, 4096);
+ inodes = init_data_container(size);
+ if (IS_ERR(inodes)) {
+ ret = PTR_ERR(inodes);
+ inodes = NULL;
+ goto out;
+ }
+
+ ret = extent_from_logical(root->fs_info, loi->logical, path, &key);
+
+ if (ret & BTRFS_EXTENT_FLAG_TREE_BLOCK)
+ ret = -ENOENT;
+ if (ret < 0)
+ goto out;
+
+ extent_offset = loi->logical - key.objectid;
+ ret = iterate_extent_inodes(root->fs_info, path, key.objectid,
+ extent_offset, build_ino_list, inodes);
+
+ if (ret < 0)
+ goto out;
+
+ ret = copy_to_user((void *)loi->inodes, (void *)inodes, size);
+ if (ret)
+ ret = -EFAULT;
+
+out:
+ btrfs_free_path(path);
+ kfree(inodes);
+ kfree(loi);
+
+ return ret;
+}
+
long btrfs_ioctl(struct file *file, unsigned int
cmd, unsigned long arg)
{
return btrfs_ioctl_tree_search(file, argp);
case BTRFS_IOC_INO_LOOKUP:
return btrfs_ioctl_ino_lookup(file, argp);
+ case BTRFS_IOC_INO_PATHS:
+ return btrfs_ioctl_ino_to_path(root, argp);
+ case BTRFS_IOC_LOGICAL_INO:
+ return btrfs_ioctl_logical_to_ino(root, argp);
case BTRFS_IOC_SPACE_INFO:
return btrfs_ioctl_space_info(root, argp);
case BTRFS_IOC_SYNC:
struct btrfs_ioctl_space_info spaces[0];
};
+struct btrfs_data_container {
+ __u32 bytes_left; /* out -- bytes not needed to deliver output */
+ __u32 bytes_missing; /* out -- additional bytes needed for result */
+ __u32 elem_cnt; /* out */
+ __u32 elem_missed; /* out */
+ __u64 val[0]; /* out */
+};
+
+struct btrfs_ioctl_ino_path_args {
+ __u64 inum; /* in */
+ __u32 size; /* in */
+ __u64 reserved[4];
+ /* struct btrfs_data_container *fspath; out */
+ __u64 fspath; /* out */
+};
+
+struct btrfs_ioctl_logical_ino_args {
+ __u64 logical; /* in */
+ __u32 size; /* in */
+ __u64 reserved[4];
+ /* struct btrfs_data_container *inodes; out */
+ __u64 inodes;
+};
+
#define BTRFS_IOC_SNAP_CREATE _IOW(BTRFS_IOCTL_MAGIC, 1, \
struct btrfs_ioctl_vol_args)
#define BTRFS_IOC_DEFRAG _IOW(BTRFS_IOCTL_MAGIC, 2, \
struct btrfs_ioctl_dev_info_args)
#define BTRFS_IOC_FS_INFO _IOR(BTRFS_IOCTL_MAGIC, 31, \
struct btrfs_ioctl_fs_info_args)
+#define BTRFS_IOC_INO_PATHS _IOWR(BTRFS_IOCTL_MAGIC, 35, \
+ struct btrfs_ioctl_ino_path_args)
+#define BTRFS_IOC_LOGICAL_INO _IOWR(BTRFS_IOCTL_MAGIC, 36, \
+ struct btrfs_ioctl_ino_path_args)
+
#endif
void btrfs_print_leaf(struct btrfs_root *root, struct extent_buffer *l)
{
int i;
- u32 type;
- u32 nr = btrfs_header_nritems(l);
+ u32 type, nr;
struct btrfs_item *item;
struct btrfs_root_item *ri;
struct btrfs_dir_item *di;
struct btrfs_key key;
struct btrfs_key found_key;
+ if (!l)
+ return;
+
+ nr = btrfs_header_nritems(l);
+
printk(KERN_INFO "leaf %llu total ptrs %d free space %d\n",
(unsigned long long)btrfs_header_bytenr(l), nr,
btrfs_leaf_free_space(root, l));
--- /dev/null
+/*
+ * Copyright (C) 2011 STRATO. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License v2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write to the
+ * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 021110-1307, USA.
+ */
+
+#include <linux/sched.h>
+#include <linux/pagemap.h>
+#include <linux/writeback.h>
+#include <linux/blkdev.h>
+#include <linux/rbtree.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include "ctree.h"
+#include "volumes.h"
+#include "disk-io.h"
+#include "transaction.h"
+
+#undef DEBUG
+
+/*
+ * This is the implementation for the generic read ahead framework.
+ *
+ * To trigger a readahead, btrfs_reada_add must be called. It will start
+ * a read ahead for the given range [start, end) on tree root. The returned
+ * handle can either be used to wait on the readahead to finish
+ * (btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
+ *
+ * The read ahead works as follows:
+ * On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
+ * reada_start_machine will then search for extents to prefetch and trigger
+ * some reads. When a read finishes for a node, all contained node/leaf
+ * pointers that lie in the given range will also be enqueued. The reads will
+ * be triggered in sequential order, thus giving a big win over a naive
+ * enumeration. It will also make use of multi-device layouts. Each disk
+ * will have its on read pointer and all disks will by utilized in parallel.
+ * Also will no two disks read both sides of a mirror simultaneously, as this
+ * would waste seeking capacity. Instead both disks will read different parts
+ * of the filesystem.
+ * Any number of readaheads can be started in parallel. The read order will be
+ * determined globally, i.e. 2 parallel readaheads will normally finish faster
+ * than the 2 started one after another.
+ */
+
+#define MAX_MIRRORS 2
+#define MAX_IN_FLIGHT 6
+
+struct reada_extctl {
+ struct list_head list;
+ struct reada_control *rc;
+ u64 generation;
+};
+
+struct reada_extent {
+ u64 logical;
+ struct btrfs_key top;
+ u32 blocksize;
+ int err;
+ struct list_head extctl;
+ struct kref refcnt;
+ spinlock_t lock;
+ struct reada_zone *zones[MAX_MIRRORS];
+ int nzones;
+ struct btrfs_device *scheduled_for;
+};
+
+struct reada_zone {
+ u64 start;
+ u64 end;
+ u64 elems;
+ struct list_head list;
+ spinlock_t lock;
+ int locked;
+ struct btrfs_device *device;
+ struct btrfs_device *devs[MAX_MIRRORS]; /* full list, incl self */
+ int ndevs;
+ struct kref refcnt;
+};
+
+struct reada_machine_work {
+ struct btrfs_work work;
+ struct btrfs_fs_info *fs_info;
+};
+
+static void reada_extent_put(struct btrfs_fs_info *, struct reada_extent *);
+static void reada_control_release(struct kref *kref);
+static void reada_zone_release(struct kref *kref);
+static void reada_start_machine(struct btrfs_fs_info *fs_info);
+static void __reada_start_machine(struct btrfs_fs_info *fs_info);
+
+static int reada_add_block(struct reada_control *rc, u64 logical,
+ struct btrfs_key *top, int level, u64 generation);
+
+/* recurses */
+/* in case of err, eb might be NULL */
+static int __readahead_hook(struct btrfs_root *root, struct extent_buffer *eb,
+ u64 start, int err)
+{
+ int level = 0;
+ int nritems;
+ int i;
+ u64 bytenr;
+ u64 generation;
+ struct reada_extent *re;
+ struct btrfs_fs_info *fs_info = root->fs_info;
+ struct list_head list;
+ unsigned long index = start >> PAGE_CACHE_SHIFT;
+ struct btrfs_device *for_dev;
+
+ if (eb)
+ level = btrfs_header_level(eb);
+
+ /* find extent */
+ spin_lock(&fs_info->reada_lock);
+ re = radix_tree_lookup(&fs_info->reada_tree, index);
+ if (re)
+ kref_get(&re->refcnt);
+ spin_unlock(&fs_info->reada_lock);
+
+ if (!re)
+ return -1;
+
+ spin_lock(&re->lock);
+ /*
+ * just take the full list from the extent. afterwards we
+ * don't need the lock anymore
+ */
+ list_replace_init(&re->extctl, &list);
+ for_dev = re->scheduled_for;
+ re->scheduled_for = NULL;
+ spin_unlock(&re->lock);
+
+ if (err == 0) {
+ nritems = level ? btrfs_header_nritems(eb) : 0;
+ generation = btrfs_header_generation(eb);
+ /*
+ * FIXME: currently we just set nritems to 0 if this is a leaf,
+ * effectively ignoring the content. In a next step we could
+ * trigger more readahead depending from the content, e.g.
+ * fetch the checksums for the extents in the leaf.
+ */
+ } else {
+ /*
+ * this is the error case, the extent buffer has not been
+ * read correctly. We won't access anything from it and
+ * just cleanup our data structures. Effectively this will
+ * cut the branch below this node from read ahead.
+ */
+ nritems = 0;
+ generation = 0;
+ }
+
+ for (i = 0; i < nritems; i++) {
+ struct reada_extctl *rec;
+ u64 n_gen;
+ struct btrfs_key key;
+ struct btrfs_key next_key;
+
+ btrfs_node_key_to_cpu(eb, &key, i);
+ if (i + 1 < nritems)
+ btrfs_node_key_to_cpu(eb, &next_key, i + 1);
+ else
+ next_key = re->top;
+ bytenr = btrfs_node_blockptr(eb, i);
+ n_gen = btrfs_node_ptr_generation(eb, i);
+
+ list_for_each_entry(rec, &list, list) {
+ struct reada_control *rc = rec->rc;
+
+ /*
+ * if the generation doesn't match, just ignore this
+ * extctl. This will probably cut off a branch from
+ * prefetch. Alternatively one could start a new (sub-)
+ * prefetch for this branch, starting again from root.
+ * FIXME: move the generation check out of this loop
+ */
+#ifdef DEBUG
+ if (rec->generation != generation) {
+ printk(KERN_DEBUG "generation mismatch for "
+ "(%llu,%d,%llu) %llu != %llu\n",
+ key.objectid, key.type, key.offset,
+ rec->generation, generation);
+ }
+#endif
+ if (rec->generation == generation &&
+ btrfs_comp_cpu_keys(&key, &rc->key_end) < 0 &&
+ btrfs_comp_cpu_keys(&next_key, &rc->key_start) > 0)
+ reada_add_block(rc, bytenr, &next_key,
+ level - 1, n_gen);
+ }
+ }
+ /*
+ * free extctl records
+ */
+ while (!list_empty(&list)) {
+ struct reada_control *rc;
+ struct reada_extctl *rec;
+
+ rec = list_first_entry(&list, struct reada_extctl, list);
+ list_del(&rec->list);
+ rc = rec->rc;
+ kfree(rec);
+
+ kref_get(&rc->refcnt);
+ if (atomic_dec_and_test(&rc->elems)) {
+ kref_put(&rc->refcnt, reada_control_release);
+ wake_up(&rc->wait);
+ }
+ kref_put(&rc->refcnt, reada_control_release);
+
+ reada_extent_put(fs_info, re); /* one ref for each entry */
+ }
+ reada_extent_put(fs_info, re); /* our ref */
+ if (for_dev)
+ atomic_dec(&for_dev->reada_in_flight);
+
+ return 0;
+}
+
+/*
+ * start is passed separately in case eb in NULL, which may be the case with
+ * failed I/O
+ */
+int btree_readahead_hook(struct btrfs_root *root, struct extent_buffer *eb,
+ u64 start, int err)
+{
+ int ret;
+
+ ret = __readahead_hook(root, eb, start, err);
+
+ reada_start_machine(root->fs_info);
+
+ return ret;
+}
+
+static struct reada_zone *reada_find_zone(struct btrfs_fs_info *fs_info,
+ struct btrfs_device *dev, u64 logical,
+ struct btrfs_bio *bbio)
+{
+ int ret;
+ int looped = 0;
+ struct reada_zone *zone;
+ struct btrfs_block_group_cache *cache = NULL;
+ u64 start;
+ u64 end;
+ int i;
+
+again:
+ zone = NULL;
+ spin_lock(&fs_info->reada_lock);
+ ret = radix_tree_gang_lookup(&dev->reada_zones, (void **)&zone,
+ logical >> PAGE_CACHE_SHIFT, 1);
+ if (ret == 1)
+ kref_get(&zone->refcnt);
+ spin_unlock(&fs_info->reada_lock);
+
+ if (ret == 1) {
+ if (logical >= zone->start && logical < zone->end)
+ return zone;
+ spin_lock(&fs_info->reada_lock);
+ kref_put(&zone->refcnt, reada_zone_release);
+ spin_unlock(&fs_info->reada_lock);
+ }
+
+ if (looped)
+ return NULL;
+
+ cache = btrfs_lookup_block_group(fs_info, logical);
+ if (!cache)
+ return NULL;
+
+ start = cache->key.objectid;
+ end = start + cache->key.offset - 1;
+ btrfs_put_block_group(cache);
+
+ zone = kzalloc(sizeof(*zone), GFP_NOFS);
+ if (!zone)
+ return NULL;
+
+ zone->start = start;
+ zone->end = end;
+ INIT_LIST_HEAD(&zone->list);
+ spin_lock_init(&zone->lock);
+ zone->locked = 0;
+ kref_init(&zone->refcnt);
+ zone->elems = 0;
+ zone->device = dev; /* our device always sits at index 0 */
+ for (i = 0; i < bbio->num_stripes; ++i) {
+ /* bounds have already been checked */
+ zone->devs[i] = bbio->stripes[i].dev;
+ }
+ zone->ndevs = bbio->num_stripes;
+
+ spin_lock(&fs_info->reada_lock);
+ ret = radix_tree_insert(&dev->reada_zones,
+ (unsigned long)zone->end >> PAGE_CACHE_SHIFT,
+ zone);
+ spin_unlock(&fs_info->reada_lock);
+
+ if (ret) {
+ kfree(zone);
+ looped = 1;
+ goto again;
+ }
+
+ return zone;
+}
+
+static struct reada_extent *reada_find_extent(struct btrfs_root *root,
+ u64 logical,
+ struct btrfs_key *top, int level)
+{
+ int ret;
+ int looped = 0;
+ struct reada_extent *re = NULL;
+ struct btrfs_fs_info *fs_info = root->fs_info;
+ struct btrfs_mapping_tree *map_tree = &fs_info->mapping_tree;
+ struct btrfs_bio *bbio = NULL;
+ struct btrfs_device *dev;
+ u32 blocksize;
+ u64 length;
+ int nzones = 0;
+ int i;
+ unsigned long index = logical >> PAGE_CACHE_SHIFT;
+
+again:
+ spin_lock(&fs_info->reada_lock);
+ re = radix_tree_lookup(&fs_info->reada_tree, index);
+ if (re)
+ kref_get(&re->refcnt);
+ spin_unlock(&fs_info->reada_lock);
+
+ if (re || looped)
+ return re;
+
+ re = kzalloc(sizeof(*re), GFP_NOFS);
+ if (!re)
+ return NULL;
+
+ blocksize = btrfs_level_size(root, level);
+ re->logical = logical;
+ re->blocksize = blocksize;
+ re->top = *top;
+ INIT_LIST_HEAD(&re->extctl);
+ spin_lock_init(&re->lock);
+ kref_init(&re->refcnt);
+
+ /*
+ * map block
+ */
+ length = blocksize;
+ ret = btrfs_map_block(map_tree, REQ_WRITE, logical, &length, &bbio, 0);
+ if (ret || !bbio || length < blocksize)
+ goto error;
+
+ if (bbio->num_stripes > MAX_MIRRORS) {
+ printk(KERN_ERR "btrfs readahead: more than %d copies not "
+ "supported", MAX_MIRRORS);
+ goto error;
+ }
+
+ for (nzones = 0; nzones < bbio->num_stripes; ++nzones) {
+ struct reada_zone *zone;
+
+ dev = bbio->stripes[nzones].dev;
+ zone = reada_find_zone(fs_info, dev, logical, bbio);
+ if (!zone)
+ break;
+
+ re->zones[nzones] = zone;
+ spin_lock(&zone->lock);
+ if (!zone->elems)
+ kref_get(&zone->refcnt);
+ ++zone->elems;
+ spin_unlock(&zone->lock);
+ spin_lock(&fs_info->reada_lock);
+ kref_put(&zone->refcnt, reada_zone_release);
+ spin_unlock(&fs_info->reada_lock);
+ }
+ re->nzones = nzones;
+ if (nzones == 0) {
+ /* not a single zone found, error and out */
+ goto error;
+ }
+
+ /* insert extent in reada_tree + all per-device trees, all or nothing */
+ spin_lock(&fs_info->reada_lock);
+ ret = radix_tree_insert(&fs_info->reada_tree, index, re);
+ if (ret) {
+ spin_unlock(&fs_info->reada_lock);
+ if (ret != -ENOMEM) {
+ /* someone inserted the extent in the meantime */
+ looped = 1;
+ }
+ goto error;
+ }
+ for (i = 0; i < nzones; ++i) {
+ dev = bbio->stripes[i].dev;
+ ret = radix_tree_insert(&dev->reada_extents, index, re);
+ if (ret) {
+ while (--i >= 0) {
+ dev = bbio->stripes[i].dev;
+ BUG_ON(dev == NULL);
+ radix_tree_delete(&dev->reada_extents, index);
+ }
+ BUG_ON(fs_info == NULL);
+ radix_tree_delete(&fs_info->reada_tree, index);
+ spin_unlock(&fs_info->reada_lock);
+ goto error;
+ }
+ }
+ spin_unlock(&fs_info->reada_lock);
+
+ kfree(bbio);
+ return re;
+
+error:
+ while (nzones) {
+ struct reada_zone *zone;
+
+ --nzones;
+ zone = re->zones[nzones];
+ kref_get(&zone->refcnt);
+ spin_lock(&zone->lock);
+ --zone->elems;
+ if (zone->elems == 0) {
+ /*
+ * no fs_info->reada_lock needed, as this can't be
+ * the last ref
+ */
+ kref_put(&zone->refcnt, reada_zone_release);
+ }
+ spin_unlock(&zone->lock);
+
+ spin_lock(&fs_info->reada_lock);
+ kref_put(&zone->refcnt, reada_zone_release);
+ spin_unlock(&fs_info->reada_lock);
+ }
+ kfree(bbio);
+ kfree(re);
+ if (looped)
+ goto again;
+ return NULL;
+}
+
+static void reada_kref_dummy(struct kref *kr)
+{
+}
+
+static void reada_extent_put(struct btrfs_fs_info *fs_info,
+ struct reada_extent *re)
+{
+ int i;
+ unsigned long index = re->logical >> PAGE_CACHE_SHIFT;
+
+ spin_lock(&fs_info->reada_lock);
+ if (!kref_put(&re->refcnt, reada_kref_dummy)) {
+ spin_unlock(&fs_info->reada_lock);
+ return;
+ }
+
+ radix_tree_delete(&fs_info->reada_tree, index);
+ for (i = 0; i < re->nzones; ++i) {
+ struct reada_zone *zone = re->zones[i];
+
+ radix_tree_delete(&zone->device->reada_extents, index);
+ }
+
+ spin_unlock(&fs_info->reada_lock);
+
+ for (i = 0; i < re->nzones; ++i) {
+ struct reada_zone *zone = re->zones[i];
+
+ kref_get(&zone->refcnt);
+ spin_lock(&zone->lock);
+ --zone->elems;
+ if (zone->elems == 0) {
+ /* no fs_info->reada_lock needed, as this can't be
+ * the last ref */
+ kref_put(&zone->refcnt, reada_zone_release);
+ }
+ spin_unlock(&zone->lock);
+
+ spin_lock(&fs_info->reada_lock);
+ kref_put(&zone->refcnt, reada_zone_release);
+ spin_unlock(&fs_info->reada_lock);
+ }
+ if (re->scheduled_for)
+ atomic_dec(&re->scheduled_for->reada_in_flight);
+
+ kfree(re);
+}
+
+static void reada_zone_release(struct kref *kref)
+{
+ struct reada_zone *zone = container_of(kref, struct reada_zone, refcnt);
+
+ radix_tree_delete(&zone->device->reada_zones,
+ zone->end >> PAGE_CACHE_SHIFT);
+
+ kfree(zone);
+}
+
+static void reada_control_release(struct kref *kref)
+{
+ struct reada_control *rc = container_of(kref, struct reada_control,
+ refcnt);
+
+ kfree(rc);
+}
+
+static int reada_add_block(struct reada_control *rc, u64 logical,
+ struct btrfs_key *top, int level, u64 generation)
+{
+ struct btrfs_root *root = rc->root;
+ struct reada_extent *re;
+ struct reada_extctl *rec;
+
+ re = reada_find_extent(root, logical, top, level); /* takes one ref */
+ if (!re)
+ return -1;
+
+ rec = kzalloc(sizeof(*rec), GFP_NOFS);
+ if (!rec) {
+ reada_extent_put(root->fs_info, re);
+ return -1;
+ }
+
+ rec->rc = rc;
+ rec->generation = generation;
+ atomic_inc(&rc->elems);
+
+ spin_lock(&re->lock);
+ list_add_tail(&rec->list, &re->extctl);
+ spin_unlock(&re->lock);
+
+ /* leave the ref on the extent */
+
+ return 0;
+}
+
+/*
+ * called with fs_info->reada_lock held
+ */
+static void reada_peer_zones_set_lock(struct reada_zone *zone, int lock)
+{
+ int i;
+ unsigned long index = zone->end >> PAGE_CACHE_SHIFT;
+
+ for (i = 0; i < zone->ndevs; ++i) {
+ struct reada_zone *peer;
+ peer = radix_tree_lookup(&zone->devs[i]->reada_zones, index);
+ if (peer && peer->device != zone->device)
+ peer->locked = lock;
+ }
+}
+
+/*
+ * called with fs_info->reada_lock held
+ */
+static int reada_pick_zone(struct btrfs_device *dev)
+{
+ struct reada_zone *top_zone = NULL;
+ struct reada_zone *top_locked_zone = NULL;
+ u64 top_elems = 0;
+ u64 top_locked_elems = 0;
+ unsigned long index = 0;
+ int ret;
+
+ if (dev->reada_curr_zone) {
+ reada_peer_zones_set_lock(dev->reada_curr_zone, 0);
+ kref_put(&dev->reada_curr_zone->refcnt, reada_zone_release);
+ dev->reada_curr_zone = NULL;
+ }
+ /* pick the zone with the most elements */
+ while (1) {
+ struct reada_zone *zone;
+
+ ret = radix_tree_gang_lookup(&dev->reada_zones,
+ (void **)&zone, index, 1);
+ if (ret == 0)
+ break;
+ index = (zone->end >> PAGE_CACHE_SHIFT) + 1;
+ if (zone->locked) {
+ if (zone->elems > top_locked_elems) {
+ top_locked_elems = zone->elems;
+ top_locked_zone = zone;
+ }
+ } else {
+ if (zone->elems > top_elems) {
+ top_elems = zone->elems;
+ top_zone = zone;
+ }
+ }
+ }
+ if (top_zone)
+ dev->reada_curr_zone = top_zone;
+ else if (top_locked_zone)
+ dev->reada_curr_zone = top_locked_zone;
+ else
+ return 0;
+
+ dev->reada_next = dev->reada_curr_zone->start;
+ kref_get(&dev->reada_curr_zone->refcnt);
+ reada_peer_zones_set_lock(dev->reada_curr_zone, 1);
+
+ return 1;
+}
+
+static int reada_start_machine_dev(struct btrfs_fs_info *fs_info,
+ struct btrfs_device *dev)
+{
+ struct reada_extent *re = NULL;
+ int mirror_num = 0;
+ struct extent_buffer *eb = NULL;
+ u64 logical;
+ u32 blocksize;
+ int ret;
+ int i;
+ int need_kick = 0;
+
+ spin_lock(&fs_info->reada_lock);
+ if (dev->reada_curr_zone == NULL) {
+ ret = reada_pick_zone(dev);
+ if (!ret) {
+ spin_unlock(&fs_info->reada_lock);
+ return 0;
+ }
+ }
+ /*
+ * FIXME currently we issue the reads one extent at a time. If we have
+ * a contiguous block of extents, we could also coagulate them or use
+ * plugging to speed things up
+ */
+ ret = radix_tree_gang_lookup(&dev->reada_extents, (void **)&re,
+ dev->reada_next >> PAGE_CACHE_SHIFT, 1);
+ if (ret == 0 || re->logical >= dev->reada_curr_zone->end) {
+ ret = reada_pick_zone(dev);
+ if (!ret) {
+ spin_unlock(&fs_info->reada_lock);
+ return 0;
+ }
+ re = NULL;
+ ret = radix_tree_gang_lookup(&dev->reada_extents, (void **)&re,
+ dev->reada_next >> PAGE_CACHE_SHIFT, 1);
+ }
+ if (ret == 0) {
+ spin_unlock(&fs_info->reada_lock);
+ return 0;
+ }
+ dev->reada_next = re->logical + re->blocksize;
+ kref_get(&re->refcnt);
+
+ spin_unlock(&fs_info->reada_lock);
+
+ /*
+ * find mirror num
+ */
+ for (i = 0; i < re->nzones; ++i) {
+ if (re->zones[i]->device == dev) {
+ mirror_num = i + 1;
+ break;
+ }
+ }
+ logical = re->logical;
+ blocksize = re->blocksize;
+
+ spin_lock(&re->lock);
+ if (re->scheduled_for == NULL) {
+ re->scheduled_for = dev;
+ need_kick = 1;
+ }
+ spin_unlock(&re->lock);
+
+ reada_extent_put(fs_info, re);
+
+ if (!need_kick)
+ return 0;
+
+ atomic_inc(&dev->reada_in_flight);
+ ret = reada_tree_block_flagged(fs_info->extent_root, logical, blocksize,
+ mirror_num, &eb);
+ if (ret)
+ __readahead_hook(fs_info->extent_root, NULL, logical, ret);
+ else if (eb)
+ __readahead_hook(fs_info->extent_root, eb, eb->start, ret);
+
+ if (eb)
+ free_extent_buffer(eb);
+
+ return 1;
+
+}
+
+static void reada_start_machine_worker(struct btrfs_work *work)
+{
+ struct reada_machine_work *rmw;
+ struct btrfs_fs_info *fs_info;
+
+ rmw = container_of(work, struct reada_machine_work, work);
+ fs_info = rmw->fs_info;
+
+ kfree(rmw);
+
+ __reada_start_machine(fs_info);
+}
+
+static void __reada_start_machine(struct btrfs_fs_info *fs_info)
+{
+ struct btrfs_device *device;
+ struct btrfs_fs_devices *fs_devices = fs_info->fs_devices;
+ u64 enqueued;
+ u64 total = 0;
+ int i;
+
+ do {
+ enqueued = 0;
+ list_for_each_entry(device, &fs_devices->devices, dev_list) {
+ if (atomic_read(&device->reada_in_flight) <
+ MAX_IN_FLIGHT)
+ enqueued += reada_start_machine_dev(fs_info,
+ device);
+ }
+ total += enqueued;
+ } while (enqueued && total < 10000);
+
+ if (enqueued == 0)
+ return;
+
+ /*
+ * If everything is already in the cache, this is effectively single
+ * threaded. To a) not hold the caller for too long and b) to utilize
+ * more cores, we broke the loop above after 10000 iterations and now
+ * enqueue to workers to finish it. This will distribute the load to
+ * the cores.
+ */
+ for (i = 0; i < 2; ++i)
+ reada_start_machine(fs_info);
+}
+
+static void reada_start_machine(struct btrfs_fs_info *fs_info)
+{
+ struct reada_machine_work *rmw;
+
+ rmw = kzalloc(sizeof(*rmw), GFP_NOFS);
+ if (!rmw) {
+ /* FIXME we cannot handle this properly right now */
+ BUG();
+ }
+ rmw->work.func = reada_start_machine_worker;
+ rmw->fs_info = fs_info;
+
+ btrfs_queue_worker(&fs_info->readahead_workers, &rmw->work);
+}
+
+#ifdef DEBUG
+static void dump_devs(struct btrfs_fs_info *fs_info, int all)
+{
+ struct btrfs_device *device;
+ struct btrfs_fs_devices *fs_devices = fs_info->fs_devices;
+ unsigned long index;
+ int ret;
+ int i;
+ int j;
+ int cnt;
+
+ spin_lock(&fs_info->reada_lock);
+ list_for_each_entry(device, &fs_devices->devices, dev_list) {
+ printk(KERN_DEBUG "dev %lld has %d in flight\n", device->devid,
+ atomic_read(&device->reada_in_flight));
+ index = 0;
+ while (1) {
+ struct reada_zone *zone;
+ ret = radix_tree_gang_lookup(&device->reada_zones,
+ (void **)&zone, index, 1);
+ if (ret == 0)
+ break;
+ printk(KERN_DEBUG " zone %llu-%llu elems %llu locked "
+ "%d devs", zone->start, zone->end, zone->elems,
+ zone->locked);
+ for (j = 0; j < zone->ndevs; ++j) {
+ printk(KERN_CONT " %lld",
+ zone->devs[j]->devid);
+ }
+ if (device->reada_curr_zone == zone)
+ printk(KERN_CONT " curr off %llu",
+ device->reada_next - zone->start);
+ printk(KERN_CONT "\n");
+ index = (zone->end >> PAGE_CACHE_SHIFT) + 1;
+ }
+ cnt = 0;
+ index = 0;
+ while (all) {
+ struct reada_extent *re = NULL;
+
+ ret = radix_tree_gang_lookup(&device->reada_extents,
+ (void **)&re, index, 1);
+ if (ret == 0)
+ break;
+ printk(KERN_DEBUG
+ " re: logical %llu size %u empty %d for %lld",
+ re->logical, re->blocksize,
+ list_empty(&re->extctl), re->scheduled_for ?
+ re->scheduled_for->devid : -1);
+
+ for (i = 0; i < re->nzones; ++i) {
+ printk(KERN_CONT " zone %llu-%llu devs",
+ re->zones[i]->start,
+ re->zones[i]->end);
+ for (j = 0; j < re->zones[i]->ndevs; ++j) {
+ printk(KERN_CONT " %lld",
+ re->zones[i]->devs[j]->devid);
+ }
+ }
+ printk(KERN_CONT "\n");
+ index = (re->logical >> PAGE_CACHE_SHIFT) + 1;
+ if (++cnt > 15)
+ break;
+ }
+ }
+
+ index = 0;
+ cnt = 0;
+ while (all) {
+ struct reada_extent *re = NULL;
+
+ ret = radix_tree_gang_lookup(&fs_info->reada_tree, (void **)&re,
+ index, 1);
+ if (ret == 0)
+ break;
+ if (!re->scheduled_for) {
+ index = (re->logical >> PAGE_CACHE_SHIFT) + 1;
+ continue;
+ }
+ printk(KERN_DEBUG
+ "re: logical %llu size %u list empty %d for %lld",
+ re->logical, re->blocksize, list_empty(&re->extctl),
+ re->scheduled_for ? re->scheduled_for->devid : -1);
+ for (i = 0; i < re->nzones; ++i) {
+ printk(KERN_CONT " zone %llu-%llu devs",
+ re->zones[i]->start,
+ re->zones[i]->end);
+ for (i = 0; i < re->nzones; ++i) {
+ printk(KERN_CONT " zone %llu-%llu devs",
+ re->zones[i]->start,
+ re->zones[i]->end);
+ for (j = 0; j < re->zones[i]->ndevs; ++j) {
+ printk(KERN_CONT " %lld",
+ re->zones[i]->devs[j]->devid);
+ }
+ }
+ }
+ printk(KERN_CONT "\n");
+ index = (re->logical >> PAGE_CACHE_SHIFT) + 1;
+ }
+ spin_unlock(&fs_info->reada_lock);
+}
+#endif
+
+/*
+ * interface
+ */
+struct reada_control *btrfs_reada_add(struct btrfs_root *root,
+ struct btrfs_key *key_start, struct btrfs_key *key_end)
+{
+ struct reada_control *rc;
+ u64 start;
+ u64 generation;
+ int level;
+ struct extent_buffer *node;
+ static struct btrfs_key max_key = {
+ .objectid = (u64)-1,
+ .type = (u8)-1,
+ .offset = (u64)-1
+ };
+
+ rc = kzalloc(sizeof(*rc), GFP_NOFS);
+ if (!rc)
+ return ERR_PTR(-ENOMEM);
+
+ rc->root = root;
+ rc->key_start = *key_start;
+ rc->key_end = *key_end;
+ atomic_set(&rc->elems, 0);
+ init_waitqueue_head(&rc->wait);
+ kref_init(&rc->refcnt);
+ kref_get(&rc->refcnt); /* one ref for having elements */
+
+ node = btrfs_root_node(root);
+ start = node->start;
+ level = btrfs_header_level(node);
+ generation = btrfs_header_generation(node);
+ free_extent_buffer(node);
+
+ reada_add_block(rc, start, &max_key, level, generation);
+
+ reada_start_machine(root->fs_info);
+
+ return rc;
+}
+
+#ifdef DEBUG
+int btrfs_reada_wait(void *handle)
+{
+ struct reada_control *rc = handle;
+
+ while (atomic_read(&rc->elems)) {
+ wait_event_timeout(rc->wait, atomic_read(&rc->elems) == 0,
+ 5 * HZ);
+ dump_devs(rc->root->fs_info, rc->elems < 10 ? 1 : 0);
+ }
+
+ dump_devs(rc->root->fs_info, rc->elems < 10 ? 1 : 0);
+
+ kref_put(&rc->refcnt, reada_control_release);
+
+ return 0;
+}
+#else
+int btrfs_reada_wait(void *handle)
+{
+ struct reada_control *rc = handle;
+
+ while (atomic_read(&rc->elems)) {
+ wait_event(rc->wait, atomic_read(&rc->elems) == 0);
+ }
+
+ kref_put(&rc->refcnt, reada_control_release);
+
+ return 0;
+}
+#endif
+
+void btrfs_reada_detach(void *handle)
+{
+ struct reada_control *rc = handle;
+
+ kref_put(&rc->refcnt, reada_control_release);
+}
list_add_tail(&new_edge->list[UPPER],
&new_node->lower);
}
+ } else {
+ list_add_tail(&new_node->lower, &cache->leaves);
}
rb_node = tree_insert(&cache->rb_root, new_node->bytenr,
BUG_ON(IS_ERR(trans));
trans->block_rsv = rc->block_rsv;
- ret = btrfs_block_rsv_check(trans, root, rc->block_rsv,
- min_reserved, 0);
+ ret = btrfs_block_rsv_refill(root, rc->block_rsv, min_reserved);
if (ret) {
BUG_ON(ret != -EAGAIN);
ret = btrfs_commit_transaction(trans, root);
again:
if (!err) {
num_bytes = rc->merging_rsv_size;
- ret = btrfs_block_rsv_add(NULL, root, rc->block_rsv,
- num_bytes);
+ ret = btrfs_block_rsv_add(root, rc->block_rsv, num_bytes);
if (ret)
err = ret;
}
num_bytes = calcu_metadata_size(rc, node, 1) * 2;
trans->block_rsv = rc->block_rsv;
- ret = btrfs_block_rsv_add(trans, root, rc->block_rsv, num_bytes);
+ ret = btrfs_block_rsv_add(root, rc->block_rsv, num_bytes);
if (ret) {
if (ret == -EAGAIN)
rc->commit_transaction = 1;
unsigned long last_index;
struct page *page;
struct file_ra_state *ra;
+ gfp_t mask = btrfs_alloc_write_mask(inode->i_mapping);
int nr = 0;
int ret = 0;
ra, NULL, index,
last_index + 1 - index);
page = find_or_create_page(inode->i_mapping, index,
- GFP_NOFS);
+ mask);
if (!page) {
btrfs_delalloc_release_metadata(inode,
PAGE_CACHE_SIZE);
}
key.objectid = ref_objectid;
- key.offset = ref_offset;
key.type = BTRFS_EXTENT_DATA_KEY;
+ if (ref_offset > ((u64)-1 << 32))
+ key.offset = 0;
+ else
+ key.offset = ref_offset;
path->search_commit_root = 1;
path->skip_locking = 1;
* btrfs_init_reloc_root will use them when there
* is no reservation in transaction handle.
*/
- ret = btrfs_block_rsv_add(NULL, rc->extent_root, rc->block_rsv,
+ ret = btrfs_block_rsv_add(rc->extent_root, rc->block_rsv,
rc->extent_root->nodesize * 256);
if (ret)
return ret;
- rc->block_rsv->refill_used = 1;
- btrfs_add_durable_block_rsv(rc->extent_root->fs_info, rc->block_rsv);
-
memset(&rc->cluster, 0, sizeof(rc->cluster));
rc->search_start = rc->block_group->key.objectid;
rc->extents_found = 0;
}
}
- ret = btrfs_block_rsv_check(trans, rc->extent_root,
- rc->block_rsv, 0, 5);
+ ret = btrfs_block_rsv_check(rc->extent_root, rc->block_rsv, 5);
if (ret < 0) {
if (ret != -EAGAIN) {
err = ret;
*/
#include <linux/blkdev.h>
+#include <linux/ratelimit.h>
#include "ctree.h"
#include "volumes.h"
#include "disk-io.h"
#include "ordered-data.h"
+#include "transaction.h"
+#include "backref.h"
+#include "extent_io.h"
/*
* This is only the first step towards a full-features scrub. It reads all
* any can be found.
*
* Future enhancements:
- * - To enhance the performance, better read-ahead strategies for the
- * extent-tree can be employed.
* - In case an unrepairable extent is encountered, track which files are
* affected and report them
* - In case of a read error on files with nodatasum, map the file and read
* the extent to trigger a writeback of the good copy
* - track and record media errors, throw out bad devices
* - add a mode to also read unallocated space
- * - make the prefetch cancellable
*/
struct scrub_bio;
struct scrub_page {
u64 flags; /* extent flags */
u64 generation;
- u64 mirror_num;
+ int mirror_num;
int have_csum;
u8 csum[BTRFS_CSUM_SIZE];
};
int first_free;
int curr;
atomic_t in_flight;
+ atomic_t fixup_cnt;
spinlock_t list_lock;
wait_queue_head_t list_wait;
u16 csum_size;
spinlock_t stat_lock;
};
+struct scrub_fixup_nodatasum {
+ struct scrub_dev *sdev;
+ u64 logical;
+ struct btrfs_root *root;
+ struct btrfs_work work;
+ int mirror_num;
+};
+
+struct scrub_warning {
+ struct btrfs_path *path;
+ u64 extent_item_size;
+ char *scratch_buf;
+ char *msg_buf;
+ const char *errstr;
+ sector_t sector;
+ u64 logical;
+ struct btrfs_device *dev;
+ int msg_bufsize;
+ int scratch_bufsize;
+};
+
static void scrub_free_csums(struct scrub_dev *sdev)
{
while (!list_empty(&sdev->csum_list)) {
if (i != SCRUB_BIOS_PER_DEV-1)
sdev->bios[i]->next_free = i + 1;
- else
+ else
sdev->bios[i]->next_free = -1;
}
sdev->first_free = 0;
sdev->curr = -1;
atomic_set(&sdev->in_flight, 0);
+ atomic_set(&sdev->fixup_cnt, 0);
atomic_set(&sdev->cancel_req, 0);
- sdev->csum_size = btrfs_super_csum_size(&fs_info->super_copy);
+ sdev->csum_size = btrfs_super_csum_size(fs_info->super_copy);
INIT_LIST_HEAD(&sdev->csum_list);
spin_lock_init(&sdev->list_lock);
return ERR_PTR(-ENOMEM);
}
+static int scrub_print_warning_inode(u64 inum, u64 offset, u64 root, void *ctx)
+{
+ u64 isize;
+ u32 nlink;
+ int ret;
+ int i;
+ struct extent_buffer *eb;
+ struct btrfs_inode_item *inode_item;
+ struct scrub_warning *swarn = ctx;
+ struct btrfs_fs_info *fs_info = swarn->dev->dev_root->fs_info;
+ struct inode_fs_paths *ipath = NULL;
+ struct btrfs_root *local_root;
+ struct btrfs_key root_key;
+
+ root_key.objectid = root;
+ root_key.type = BTRFS_ROOT_ITEM_KEY;
+ root_key.offset = (u64)-1;
+ local_root = btrfs_read_fs_root_no_name(fs_info, &root_key);
+ if (IS_ERR(local_root)) {
+ ret = PTR_ERR(local_root);
+ goto err;
+ }
+
+ ret = inode_item_info(inum, 0, local_root, swarn->path);
+ if (ret) {
+ btrfs_release_path(swarn->path);
+ goto err;
+ }
+
+ eb = swarn->path->nodes[0];
+ inode_item = btrfs_item_ptr(eb, swarn->path->slots[0],
+ struct btrfs_inode_item);
+ isize = btrfs_inode_size(eb, inode_item);
+ nlink = btrfs_inode_nlink(eb, inode_item);
+ btrfs_release_path(swarn->path);
+
+ ipath = init_ipath(4096, local_root, swarn->path);
+ ret = paths_from_inode(inum, ipath);
+
+ if (ret < 0)
+ goto err;
+
+ /*
+ * we deliberately ignore the bit ipath might have been too small to
+ * hold all of the paths here
+ */
+ for (i = 0; i < ipath->fspath->elem_cnt; ++i)
+ printk(KERN_WARNING "btrfs: %s at logical %llu on dev "
+ "%s, sector %llu, root %llu, inode %llu, offset %llu, "
+ "length %llu, links %u (path: %s)\n", swarn->errstr,
+ swarn->logical, swarn->dev->name,
+ (unsigned long long)swarn->sector, root, inum, offset,
+ min(isize - offset, (u64)PAGE_SIZE), nlink,
+ (char *)ipath->fspath->val[i]);
+
+ free_ipath(ipath);
+ return 0;
+
+err:
+ printk(KERN_WARNING "btrfs: %s at logical %llu on dev "
+ "%s, sector %llu, root %llu, inode %llu, offset %llu: path "
+ "resolving failed with ret=%d\n", swarn->errstr,
+ swarn->logical, swarn->dev->name,
+ (unsigned long long)swarn->sector, root, inum, offset, ret);
+
+ free_ipath(ipath);
+ return 0;
+}
+
+static void scrub_print_warning(const char *errstr, struct scrub_bio *sbio,
+ int ix)
+{
+ struct btrfs_device *dev = sbio->sdev->dev;
+ struct btrfs_fs_info *fs_info = dev->dev_root->fs_info;
+ struct btrfs_path *path;
+ struct btrfs_key found_key;
+ struct extent_buffer *eb;
+ struct btrfs_extent_item *ei;
+ struct scrub_warning swarn;
+ u32 item_size;
+ int ret;
+ u64 ref_root;
+ u8 ref_level;
+ unsigned long ptr = 0;
+ const int bufsize = 4096;
+ u64 extent_offset;
+
+ path = btrfs_alloc_path();
+
+ swarn.scratch_buf = kmalloc(bufsize, GFP_NOFS);
+ swarn.msg_buf = kmalloc(bufsize, GFP_NOFS);
+ swarn.sector = (sbio->physical + ix * PAGE_SIZE) >> 9;
+ swarn.logical = sbio->logical + ix * PAGE_SIZE;
+ swarn.errstr = errstr;
+ swarn.dev = dev;
+ swarn.msg_bufsize = bufsize;
+ swarn.scratch_bufsize = bufsize;
+
+ if (!path || !swarn.scratch_buf || !swarn.msg_buf)
+ goto out;
+
+ ret = extent_from_logical(fs_info, swarn.logical, path, &found_key);
+ if (ret < 0)
+ goto out;
+
+ extent_offset = swarn.logical - found_key.objectid;
+ swarn.extent_item_size = found_key.offset;
+
+ eb = path->nodes[0];
+ ei = btrfs_item_ptr(eb, path->slots[0], struct btrfs_extent_item);
+ item_size = btrfs_item_size_nr(eb, path->slots[0]);
+
+ if (ret & BTRFS_EXTENT_FLAG_TREE_BLOCK) {
+ do {
+ ret = tree_backref_for_extent(&ptr, eb, ei, item_size,
+ &ref_root, &ref_level);
+ printk(KERN_WARNING "%s at logical %llu on dev %s, "
+ "sector %llu: metadata %s (level %d) in tree "
+ "%llu\n", errstr, swarn.logical, dev->name,
+ (unsigned long long)swarn.sector,
+ ref_level ? "node" : "leaf",
+ ret < 0 ? -1 : ref_level,
+ ret < 0 ? -1 : ref_root);
+ } while (ret != 1);
+ } else {
+ swarn.path = path;
+ iterate_extent_inodes(fs_info, path, found_key.objectid,
+ extent_offset,
+ scrub_print_warning_inode, &swarn);
+ }
+
+out:
+ btrfs_free_path(path);
+ kfree(swarn.scratch_buf);
+ kfree(swarn.msg_buf);
+}
+
+static int scrub_fixup_readpage(u64 inum, u64 offset, u64 root, void *ctx)
+{
+ struct page *page = NULL;
+ unsigned long index;
+ struct scrub_fixup_nodatasum *fixup = ctx;
+ int ret;
+ int corrected = 0;
+ struct btrfs_key key;
+ struct inode *inode = NULL;
+ u64 end = offset + PAGE_SIZE - 1;
+ struct btrfs_root *local_root;
+
+ key.objectid = root;
+ key.type = BTRFS_ROOT_ITEM_KEY;
+ key.offset = (u64)-1;
+ local_root = btrfs_read_fs_root_no_name(fixup->root->fs_info, &key);
+ if (IS_ERR(local_root))
+ return PTR_ERR(local_root);
+
+ key.type = BTRFS_INODE_ITEM_KEY;
+ key.objectid = inum;
+ key.offset = 0;
+ inode = btrfs_iget(fixup->root->fs_info->sb, &key, local_root, NULL);
+ if (IS_ERR(inode))
+ return PTR_ERR(inode);
+
+ index = offset >> PAGE_CACHE_SHIFT;
+
+ page = find_or_create_page(inode->i_mapping, index, GFP_NOFS);
+ if (!page) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ if (PageUptodate(page)) {
+ struct btrfs_mapping_tree *map_tree;
+ if (PageDirty(page)) {
+ /*
+ * we need to write the data to the defect sector. the
+ * data that was in that sector is not in memory,
+ * because the page was modified. we must not write the
+ * modified page to that sector.
+ *
+ * TODO: what could be done here: wait for the delalloc
+ * runner to write out that page (might involve
+ * COW) and see whether the sector is still
+ * referenced afterwards.
+ *
+ * For the meantime, we'll treat this error
+ * incorrectable, although there is a chance that a
+ * later scrub will find the bad sector again and that
+ * there's no dirty page in memory, then.
+ */
+ ret = -EIO;
+ goto out;
+ }
+ map_tree = &BTRFS_I(inode)->root->fs_info->mapping_tree;
+ ret = repair_io_failure(map_tree, offset, PAGE_SIZE,
+ fixup->logical, page,
+ fixup->mirror_num);
+ unlock_page(page);
+ corrected = !ret;
+ } else {
+ /*
+ * we need to get good data first. the general readpage path
+ * will call repair_io_failure for us, we just have to make
+ * sure we read the bad mirror.
+ */
+ ret = set_extent_bits(&BTRFS_I(inode)->io_tree, offset, end,
+ EXTENT_DAMAGED, GFP_NOFS);
+ if (ret) {
+ /* set_extent_bits should give proper error */
+ WARN_ON(ret > 0);
+ if (ret > 0)
+ ret = -EFAULT;
+ goto out;
+ }
+
+ ret = extent_read_full_page(&BTRFS_I(inode)->io_tree, page,
+ btrfs_get_extent,
+ fixup->mirror_num);
+ wait_on_page_locked(page);
+
+ corrected = !test_range_bit(&BTRFS_I(inode)->io_tree, offset,
+ end, EXTENT_DAMAGED, 0, NULL);
+ if (!corrected)
+ clear_extent_bits(&BTRFS_I(inode)->io_tree, offset, end,
+ EXTENT_DAMAGED, GFP_NOFS);
+ }
+
+out:
+ if (page)
+ put_page(page);
+ if (inode)
+ iput(inode);
+
+ if (ret < 0)
+ return ret;
+
+ if (ret == 0 && corrected) {
+ /*
+ * we only need to call readpage for one of the inodes belonging
+ * to this extent. so make iterate_extent_inodes stop
+ */
+ return 1;
+ }
+
+ return -EIO;
+}
+
+static void scrub_fixup_nodatasum(struct btrfs_work *work)
+{
+ int ret;
+ struct scrub_fixup_nodatasum *fixup;
+ struct scrub_dev *sdev;
+ struct btrfs_trans_handle *trans = NULL;
+ struct btrfs_fs_info *fs_info;
+ struct btrfs_path *path;
+ int uncorrectable = 0;
+
+ fixup = container_of(work, struct scrub_fixup_nodatasum, work);
+ sdev = fixup->sdev;
+ fs_info = fixup->root->fs_info;
+
+ path = btrfs_alloc_path();
+ if (!path) {
+ spin_lock(&sdev->stat_lock);
+ ++sdev->stat.malloc_errors;
+ spin_unlock(&sdev->stat_lock);
+ uncorrectable = 1;
+ goto out;
+ }
+
+ trans = btrfs_join_transaction(fixup->root);
+ if (IS_ERR(trans)) {
+ uncorrectable = 1;
+ goto out;
+ }
+
+ /*
+ * the idea is to trigger a regular read through the standard path. we
+ * read a page from the (failed) logical address by specifying the
+ * corresponding copynum of the failed sector. thus, that readpage is
+ * expected to fail.
+ * that is the point where on-the-fly error correction will kick in
+ * (once it's finished) and rewrite the failed sector if a good copy
+ * can be found.
+ */
+ ret = iterate_inodes_from_logical(fixup->logical, fixup->root->fs_info,
+ path, scrub_fixup_readpage,
+ fixup);
+ if (ret < 0) {
+ uncorrectable = 1;
+ goto out;
+ }
+ WARN_ON(ret != 1);
+
+ spin_lock(&sdev->stat_lock);
+ ++sdev->stat.corrected_errors;
+ spin_unlock(&sdev->stat_lock);
+
+out:
+ if (trans && !IS_ERR(trans))
+ btrfs_end_transaction(trans, fixup->root);
+ if (uncorrectable) {
+ spin_lock(&sdev->stat_lock);
+ ++sdev->stat.uncorrectable_errors;
+ spin_unlock(&sdev->stat_lock);
+ printk_ratelimited(KERN_ERR "btrfs: unable to fixup "
+ "(nodatasum) error at logical %llu\n",
+ fixup->logical);
+ }
+
+ btrfs_free_path(path);
+ kfree(fixup);
+
+ /* see caller why we're pretending to be paused in the scrub counters */
+ mutex_lock(&fs_info->scrub_lock);
+ atomic_dec(&fs_info->scrubs_running);
+ atomic_dec(&fs_info->scrubs_paused);
+ mutex_unlock(&fs_info->scrub_lock);
+ atomic_dec(&sdev->fixup_cnt);
+ wake_up(&fs_info->scrub_pause_wait);
+ wake_up(&sdev->list_wait);
+}
+
/*
* scrub_recheck_error gets called when either verification of the page
* failed or the bio failed to read, e.g. with EIO. In the latter case,
* recheck_error gets called for every page in the bio, even though only
* one may be bad
*/
-static void scrub_recheck_error(struct scrub_bio *sbio, int ix)
+static int scrub_recheck_error(struct scrub_bio *sbio, int ix)
{
+ struct scrub_dev *sdev = sbio->sdev;
+ u64 sector = (sbio->physical + ix * PAGE_SIZE) >> 9;
+ static DEFINE_RATELIMIT_STATE(_rs, DEFAULT_RATELIMIT_INTERVAL,
+ DEFAULT_RATELIMIT_BURST);
+
if (sbio->err) {
- if (scrub_fixup_io(READ, sbio->sdev->dev->bdev,
- (sbio->physical + ix * PAGE_SIZE) >> 9,
+ if (scrub_fixup_io(READ, sbio->sdev->dev->bdev, sector,
sbio->bio->bi_io_vec[ix].bv_page) == 0) {
if (scrub_fixup_check(sbio, ix) == 0)
- return;
+ return 0;
}
+ if (__ratelimit(&_rs))
+ scrub_print_warning("i/o error", sbio, ix);
+ } else {
+ if (__ratelimit(&_rs))
+ scrub_print_warning("checksum error", sbio, ix);
}
+ spin_lock(&sdev->stat_lock);
+ ++sdev->stat.read_errors;
+ spin_unlock(&sdev->stat_lock);
+
scrub_fixup(sbio, ix);
+ return 1;
}
static int scrub_fixup_check(struct scrub_bio *sbio, int ix)
struct scrub_dev *sdev = sbio->sdev;
struct btrfs_fs_info *fs_info = sdev->dev->dev_root->fs_info;
struct btrfs_mapping_tree *map_tree = &fs_info->mapping_tree;
- struct btrfs_multi_bio *multi = NULL;
+ struct btrfs_bio *bbio = NULL;
+ struct scrub_fixup_nodatasum *fixup;
u64 logical = sbio->logical + ix * PAGE_SIZE;
u64 length;
int i;
if ((sbio->spag[ix].flags & BTRFS_EXTENT_FLAG_DATA) &&
(sbio->spag[ix].have_csum == 0)) {
+ fixup = kzalloc(sizeof(*fixup), GFP_NOFS);
+ if (!fixup)
+ goto uncorrectable;
+ fixup->sdev = sdev;
+ fixup->logical = logical;
+ fixup->root = fs_info->extent_root;
+ fixup->mirror_num = sbio->spag[ix].mirror_num;
/*
- * nodatasum, don't try to fix anything
- * FIXME: we can do better, open the inode and trigger a
- * writeback
+ * increment scrubs_running to prevent cancel requests from
+ * completing as long as a fixup worker is running. we must also
+ * increment scrubs_paused to prevent deadlocking on pause
+ * requests used for transactions commits (as the worker uses a
+ * transaction context). it is safe to regard the fixup worker
+ * as paused for all matters practical. effectively, we only
+ * avoid cancellation requests from completing.
*/
- goto uncorrectable;
+ mutex_lock(&fs_info->scrub_lock);
+ atomic_inc(&fs_info->scrubs_running);
+ atomic_inc(&fs_info->scrubs_paused);
+ mutex_unlock(&fs_info->scrub_lock);
+ atomic_inc(&sdev->fixup_cnt);
+ fixup->work.func = scrub_fixup_nodatasum;
+ btrfs_queue_worker(&fs_info->scrub_workers, &fixup->work);
+ return;
}
length = PAGE_SIZE;
ret = btrfs_map_block(map_tree, REQ_WRITE, logical, &length,
- &multi, 0);
- if (ret || !multi || length < PAGE_SIZE) {
+ &bbio, 0);
+ if (ret || !bbio || length < PAGE_SIZE) {
printk(KERN_ERR
"scrub_fixup: btrfs_map_block failed us for %llu\n",
(unsigned long long)logical);
WARN_ON(1);
+ kfree(bbio);
return;
}
- if (multi->num_stripes == 1)
+ if (bbio->num_stripes == 1)
/* there aren't any replicas */
goto uncorrectable;
/*
* first find a good copy
*/
- for (i = 0; i < multi->num_stripes; ++i) {
- if (i == sbio->spag[ix].mirror_num)
+ for (i = 0; i < bbio->num_stripes; ++i) {
+ if (i + 1 == sbio->spag[ix].mirror_num)
continue;
- if (scrub_fixup_io(READ, multi->stripes[i].dev->bdev,
- multi->stripes[i].physical >> 9,
+ if (scrub_fixup_io(READ, bbio->stripes[i].dev->bdev,
+ bbio->stripes[i].physical >> 9,
sbio->bio->bi_io_vec[ix].bv_page)) {
/* I/O-error, this is not a good copy */
continue;
if (scrub_fixup_check(sbio, ix) == 0)
break;
}
- if (i == multi->num_stripes)
+ if (i == bbio->num_stripes)
goto uncorrectable;
if (!sdev->readonly) {
}
}
- kfree(multi);
+ kfree(bbio);
spin_lock(&sdev->stat_lock);
++sdev->stat.corrected_errors;
spin_unlock(&sdev->stat_lock);
- if (printk_ratelimit())
- printk(KERN_ERR "btrfs: fixed up at %llu\n",
- (unsigned long long)logical);
+ printk_ratelimited(KERN_ERR "btrfs: fixed up error at logical %llu\n",
+ (unsigned long long)logical);
return;
uncorrectable:
- kfree(multi);
+ kfree(bbio);
spin_lock(&sdev->stat_lock);
++sdev->stat.uncorrectable_errors;
spin_unlock(&sdev->stat_lock);
- if (printk_ratelimit())
- printk(KERN_ERR "btrfs: unable to fixup at %llu\n",
- (unsigned long long)logical);
+ printk_ratelimited(KERN_ERR "btrfs: unable to fixup (regular) error at "
+ "logical %llu\n", (unsigned long long)logical);
}
static int scrub_fixup_io(int rw, struct block_device *bdev, sector_t sector,
int ret;
if (sbio->err) {
+ ret = 0;
for (i = 0; i < sbio->count; ++i)
- scrub_recheck_error(sbio, i);
+ ret |= scrub_recheck_error(sbio, i);
+ if (!ret) {
+ spin_lock(&sdev->stat_lock);
+ ++sdev->stat.unverified_errors;
+ spin_unlock(&sdev->stat_lock);
+ }
sbio->bio->bi_flags &= ~(BIO_POOL_MASK - 1);
sbio->bio->bi_flags |= 1 << BIO_UPTODATE;
bi->bv_offset = 0;
bi->bv_len = PAGE_SIZE;
}
-
- spin_lock(&sdev->stat_lock);
- ++sdev->stat.read_errors;
- spin_unlock(&sdev->stat_lock);
goto out;
}
for (i = 0; i < sbio->count; ++i) {
WARN_ON(1);
}
kunmap_atomic(buffer, KM_USER0);
- if (ret)
- scrub_recheck_error(sbio, i);
+ if (ret) {
+ ret = scrub_recheck_error(sbio, i);
+ if (!ret) {
+ spin_lock(&sdev->stat_lock);
+ ++sdev->stat.unverified_errors;
+ spin_unlock(&sdev->stat_lock);
+ }
+ }
}
out:
static int scrub_submit(struct scrub_dev *sdev)
{
struct scrub_bio *sbio;
- struct bio *bio;
- int i;
if (sdev->curr == -1)
return 0;
sbio = sdev->bios[sdev->curr];
-
- bio = bio_alloc(GFP_NOFS, sbio->count);
- if (!bio)
- goto nomem;
-
- bio->bi_private = sbio;
- bio->bi_end_io = scrub_bio_end_io;
- bio->bi_bdev = sdev->dev->bdev;
- bio->bi_sector = sbio->physical >> 9;
-
- for (i = 0; i < sbio->count; ++i) {
- struct page *page;
- int ret;
-
- page = alloc_page(GFP_NOFS);
- if (!page)
- goto nomem;
-
- ret = bio_add_page(bio, page, PAGE_SIZE, 0);
- if (!ret) {
- __free_page(page);
- goto nomem;
- }
- }
-
sbio->err = 0;
sdev->curr = -1;
atomic_inc(&sdev->in_flight);
- submit_bio(READ, bio);
+ submit_bio(READ, sbio->bio);
return 0;
-
-nomem:
- scrub_free_bio(bio);
-
- return -ENOMEM;
}
static int scrub_page(struct scrub_dev *sdev, u64 logical, u64 len,
- u64 physical, u64 flags, u64 gen, u64 mirror_num,
+ u64 physical, u64 flags, u64 gen, int mirror_num,
u8 *csum, int force)
{
struct scrub_bio *sbio;
+ struct page *page;
+ int ret;
again:
/*
}
sbio = sdev->bios[sdev->curr];
if (sbio->count == 0) {
+ struct bio *bio;
+
sbio->physical = physical;
sbio->logical = logical;
+ bio = bio_alloc(GFP_NOFS, SCRUB_PAGES_PER_BIO);
+ if (!bio)
+ return -ENOMEM;
+
+ bio->bi_private = sbio;
+ bio->bi_end_io = scrub_bio_end_io;
+ bio->bi_bdev = sdev->dev->bdev;
+ bio->bi_sector = sbio->physical >> 9;
+ sbio->err = 0;
+ sbio->bio = bio;
} else if (sbio->physical + sbio->count * PAGE_SIZE != physical ||
sbio->logical + sbio->count * PAGE_SIZE != logical) {
- int ret;
-
ret = scrub_submit(sdev);
if (ret)
return ret;
sbio->spag[sbio->count].generation = gen;
sbio->spag[sbio->count].have_csum = 0;
sbio->spag[sbio->count].mirror_num = mirror_num;
+
+ page = alloc_page(GFP_NOFS);
+ if (!page)
+ return -ENOMEM;
+
+ ret = bio_add_page(sbio->bio, page, PAGE_SIZE, 0);
+ if (!ret) {
+ __free_page(page);
+ ret = scrub_submit(sdev);
+ if (ret)
+ return ret;
+ goto again;
+ }
+
if (csum) {
sbio->spag[sbio->count].have_csum = 1;
memcpy(sbio->spag[sbio->count].csum, csum, sdev->csum_size);
/* scrub extent tries to collect up to 64 kB for each bio */
static int scrub_extent(struct scrub_dev *sdev, u64 logical, u64 len,
- u64 physical, u64 flags, u64 gen, u64 mirror_num)
+ u64 physical, u64 flags, u64 gen, int mirror_num)
{
int ret;
u8 csum[BTRFS_CSUM_SIZE];
int slot;
int i;
u64 nstripes;
- int start_stripe;
struct extent_buffer *l;
struct btrfs_key key;
u64 physical;
u64 logical;
u64 generation;
- u64 mirror_num;
+ int mirror_num;
+ struct reada_control *reada1;
+ struct reada_control *reada2;
+ struct btrfs_key key_start;
+ struct btrfs_key key_end;
u64 increment = map->stripe_len;
u64 offset;
if (map->type & BTRFS_BLOCK_GROUP_RAID0) {
offset = map->stripe_len * num;
increment = map->stripe_len * map->num_stripes;
- mirror_num = 0;
+ mirror_num = 1;
} else if (map->type & BTRFS_BLOCK_GROUP_RAID10) {
int factor = map->num_stripes / map->sub_stripes;
offset = map->stripe_len * (num / map->sub_stripes);
increment = map->stripe_len * factor;
- mirror_num = num % map->sub_stripes;
+ mirror_num = num % map->sub_stripes + 1;
} else if (map->type & BTRFS_BLOCK_GROUP_RAID1) {
increment = map->stripe_len;
- mirror_num = num % map->num_stripes;
+ mirror_num = num % map->num_stripes + 1;
} else if (map->type & BTRFS_BLOCK_GROUP_DUP) {
increment = map->stripe_len;
- mirror_num = num % map->num_stripes;
+ mirror_num = num % map->num_stripes + 1;
} else {
increment = map->stripe_len;
- mirror_num = 0;
+ mirror_num = 1;
}
path = btrfs_alloc_path();
if (!path)
return -ENOMEM;
- path->reada = 2;
path->search_commit_root = 1;
path->skip_locking = 1;
/*
- * find all extents for each stripe and just read them to get
- * them into the page cache
- * FIXME: we can do better. build a more intelligent prefetching
+ * trigger the readahead for extent tree csum tree and wait for
+ * completion. During readahead, the scrub is officially paused
+ * to not hold off transaction commits
*/
logical = base + offset;
- physical = map->stripes[num].physical;
- ret = 0;
- for (i = 0; i < nstripes; ++i) {
- key.objectid = logical;
- key.type = BTRFS_EXTENT_ITEM_KEY;
- key.offset = (u64)0;
-
- ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
- if (ret < 0)
- goto out_noplug;
-
- /*
- * we might miss half an extent here, but that doesn't matter,
- * as it's only the prefetch
- */
- while (1) {
- l = path->nodes[0];
- slot = path->slots[0];
- if (slot >= btrfs_header_nritems(l)) {
- ret = btrfs_next_leaf(root, path);
- if (ret == 0)
- continue;
- if (ret < 0)
- goto out_noplug;
- break;
- }
- btrfs_item_key_to_cpu(l, &key, slot);
+ wait_event(sdev->list_wait,
+ atomic_read(&sdev->in_flight) == 0);
+ atomic_inc(&fs_info->scrubs_paused);
+ wake_up(&fs_info->scrub_pause_wait);
- if (key.objectid >= logical + map->stripe_len)
- break;
+ /* FIXME it might be better to start readahead at commit root */
+ key_start.objectid = logical;
+ key_start.type = BTRFS_EXTENT_ITEM_KEY;
+ key_start.offset = (u64)0;
+ key_end.objectid = base + offset + nstripes * increment;
+ key_end.type = BTRFS_EXTENT_ITEM_KEY;
+ key_end.offset = (u64)0;
+ reada1 = btrfs_reada_add(root, &key_start, &key_end);
+
+ key_start.objectid = BTRFS_EXTENT_CSUM_OBJECTID;
+ key_start.type = BTRFS_EXTENT_CSUM_KEY;
+ key_start.offset = logical;
+ key_end.objectid = BTRFS_EXTENT_CSUM_OBJECTID;
+ key_end.type = BTRFS_EXTENT_CSUM_KEY;
+ key_end.offset = base + offset + nstripes * increment;
+ reada2 = btrfs_reada_add(csum_root, &key_start, &key_end);
+
+ if (!IS_ERR(reada1))
+ btrfs_reada_wait(reada1);
+ if (!IS_ERR(reada2))
+ btrfs_reada_wait(reada2);
- path->slots[0]++;
- }
- btrfs_release_path(path);
- logical += increment;
- physical += map->stripe_len;
- cond_resched();
+ mutex_lock(&fs_info->scrub_lock);
+ while (atomic_read(&fs_info->scrub_pause_req)) {
+ mutex_unlock(&fs_info->scrub_lock);
+ wait_event(fs_info->scrub_pause_wait,
+ atomic_read(&fs_info->scrub_pause_req) == 0);
+ mutex_lock(&fs_info->scrub_lock);
}
+ atomic_dec(&fs_info->scrubs_paused);
+ mutex_unlock(&fs_info->scrub_lock);
+ wake_up(&fs_info->scrub_pause_wait);
/*
* collect all data csums for the stripe to avoid seeking during
* the scrub. This might currently (crc32) end up to be about 1MB
*/
- start_stripe = 0;
blk_start_plug(&plug);
-again:
- logical = base + offset + start_stripe * increment;
- for (i = start_stripe; i < nstripes; ++i) {
- ret = btrfs_lookup_csums_range(csum_root, logical,
- logical + map->stripe_len - 1,
- &sdev->csum_list, 1);
- if (ret)
- goto out;
- logical += increment;
- cond_resched();
- }
/*
* now find all extents for each stripe and scrub them
*/
- logical = base + offset + start_stripe * increment;
- physical = map->stripes[num].physical + start_stripe * map->stripe_len;
+ logical = base + offset;
+ physical = map->stripes[num].physical;
ret = 0;
- for (i = start_stripe; i < nstripes; ++i) {
+ for (i = 0; i < nstripes; ++i) {
/*
* canceled?
*/
atomic_dec(&fs_info->scrubs_paused);
mutex_unlock(&fs_info->scrub_lock);
wake_up(&fs_info->scrub_pause_wait);
- scrub_free_csums(sdev);
- start_stripe = i;
- goto again;
}
+ ret = btrfs_lookup_csums_range(csum_root, logical,
+ logical + map->stripe_len - 1,
+ &sdev->csum_list, 1);
+ if (ret)
+ goto out;
+
key.objectid = logical;
key.type = BTRFS_EXTENT_ITEM_KEY;
key.offset = (u64)0;
out:
blk_finish_plug(&plug);
-out_noplug:
btrfs_free_path(path);
return ret < 0 ? ret : 0;
}
ret = scrub_enumerate_chunks(sdev, start, end);
wait_event(sdev->list_wait, atomic_read(&sdev->in_flight) == 0);
-
atomic_dec(&fs_info->scrubs_running);
wake_up(&fs_info->scrub_pause_wait);
+ wait_event(sdev->list_wait, atomic_read(&sdev->fixup_cnt) == 0);
+
if (progress)
memcpy(progress, &sdev->stat, sizeof(*progress));
#include <linux/magic.h>
#include <linux/slab.h>
#include <linux/cleancache.h>
+#include <linux/mnt_namespace.h>
#include "compat.h"
#include "delayed-inode.h"
#include "ctree.h"
#include <trace/events/btrfs.h>
static const struct super_operations btrfs_super_ops;
+static struct file_system_type btrfs_fs_type;
static const char *btrfs_decode_error(struct btrfs_fs_info *fs_info, int errno,
char nbuf[16])
Opt_notreelog, Opt_ratio, Opt_flushoncommit, Opt_discard,
Opt_space_cache, Opt_clear_cache, Opt_user_subvol_rm_allowed,
Opt_enospc_debug, Opt_subvolrootid, Opt_defrag,
- Opt_inode_cache, Opt_err,
+ Opt_inode_cache, Opt_no_space_cache, Opt_recovery, Opt_err,
};
static match_table_t tokens = {
{Opt_subvolrootid, "subvolrootid=%d"},
{Opt_defrag, "autodefrag"},
{Opt_inode_cache, "inode_cache"},
+ {Opt_no_space_cache, "nospace_cache"},
+ {Opt_recovery, "recovery"},
{Opt_err, NULL},
};
{
struct btrfs_fs_info *info = root->fs_info;
substring_t args[MAX_OPT_ARGS];
- char *p, *num, *orig;
+ char *p, *num, *orig = NULL;
+ u64 cache_gen;
int intarg;
int ret = 0;
char *compress_type;
bool compress_force = false;
+ cache_gen = btrfs_super_cache_generation(root->fs_info->super_copy);
+ if (cache_gen)
+ btrfs_set_opt(info->mount_opt, SPACE_CACHE);
+
if (!options)
- return 0;
+ goto out;
/*
* strsep changes the string, duplicate it because parse_options
btrfs_set_opt(info->mount_opt, DISCARD);
break;
case Opt_space_cache:
- printk(KERN_INFO "btrfs: enabling disk space caching\n");
btrfs_set_opt(info->mount_opt, SPACE_CACHE);
break;
+ case Opt_no_space_cache:
+ printk(KERN_INFO "btrfs: disabling disk space caching\n");
+ btrfs_clear_opt(info->mount_opt, SPACE_CACHE);
+ break;
case Opt_inode_cache:
printk(KERN_INFO "btrfs: enabling inode map caching\n");
btrfs_set_opt(info->mount_opt, INODE_MAP_CACHE);
printk(KERN_INFO "btrfs: enabling auto defrag");
btrfs_set_opt(info->mount_opt, AUTO_DEFRAG);
break;
+ case Opt_recovery:
+ printk(KERN_INFO "btrfs: enabling auto recovery");
+ btrfs_set_opt(info->mount_opt, RECOVERY);
+ break;
case Opt_err:
printk(KERN_INFO "btrfs: unrecognized mount option "
"'%s'\n", p);
}
}
out:
+ if (!ret && btrfs_test_opt(root, SPACE_CACHE))
+ printk(KERN_INFO "btrfs: disk space caching is enabled\n");
kfree(orig);
return ret;
}
u64 *subvol_rootid, struct btrfs_fs_devices **fs_devices)
{
substring_t args[MAX_OPT_ARGS];
- char *opts, *orig, *p;
+ char *device_name, *opts, *orig, *p;
int error = 0;
int intarg;
if (!options)
- goto out;
+ return 0;
/*
* strsep changes the string, duplicate it because parse_options
token = match_token(p, tokens, args);
switch (token) {
case Opt_subvol:
+ kfree(*subvol_name);
*subvol_name = match_strdup(&args[0]);
break;
case Opt_subvolid:
}
break;
case Opt_device:
- error = btrfs_scan_one_device(match_strdup(&args[0]),
+ device_name = match_strdup(&args[0]);
+ if (!device_name) {
+ error = -ENOMEM;
+ goto out;
+ }
+ error = btrfs_scan_one_device(device_name,
flags, holder, fs_devices);
+ kfree(device_name);
if (error)
- goto out_free_opts;
+ goto out;
break;
default:
break;
}
}
- out_free_opts:
+out:
kfree(orig);
- out:
- /*
- * If no subvolume name is specified we use the default one. Allocate
- * a copy of the string "." here so that code later in the
- * mount path doesn't care if it's the default volume or another one.
- */
- if (!*subvol_name) {
- *subvol_name = kstrdup(".", GFP_KERNEL);
- if (!*subvol_name)
- return -ENOMEM;
- }
return error;
}
struct btrfs_path *path;
struct btrfs_key location;
struct inode *inode;
- struct dentry *dentry;
u64 dir_id;
int new = 0;
* will mount by default if we haven't been given a specific subvolume
* to mount.
*/
- dir_id = btrfs_super_root_dir(&root->fs_info->super_copy);
+ dir_id = btrfs_super_root_dir(root->fs_info->super_copy);
di = btrfs_lookup_dir_item(NULL, root, path, dir_id, "default", 7, 0);
if (IS_ERR(di)) {
btrfs_free_path(path);
return dget(sb->s_root);
}
- if (new) {
- const struct qstr name = { .name = "/", .len = 1 };
-
- /*
- * New inode, we need to make the dentry a sibling of s_root so
- * everything gets cleaned up properly on unmount.
- */
- dentry = d_alloc(sb->s_root, &name);
- if (!dentry) {
- iput(inode);
- return ERR_PTR(-ENOMEM);
- }
- d_splice_alias(inode, dentry);
- } else {
- /*
- * We found the inode in cache, just find a dentry for it and
- * put the reference to the inode we just got.
- */
- dentry = d_find_alias(inode);
- iput(inode);
- }
-
- return dentry;
+ return d_obtain_alias(inode);
}
static int btrfs_fill_super(struct super_block *sb,
seq_puts(seq, ",noacl");
if (btrfs_test_opt(root, SPACE_CACHE))
seq_puts(seq, ",space_cache");
+ else
+ seq_puts(seq, ",nospace_cache");
if (btrfs_test_opt(root, CLEAR_CACHE))
seq_puts(seq, ",clear_cache");
if (btrfs_test_opt(root, USER_SUBVOL_RM_ALLOWED))
return set_anon_super(s, data);
}
+/*
+ * subvolumes are identified by ino 256
+ */
+static inline int is_subvolume_inode(struct inode *inode)
+{
+ if (inode && inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)
+ return 1;
+ return 0;
+}
+
+/*
+ * This will strip out the subvol=%s argument for an argument string and add
+ * subvolid=0 to make sure we get the actual tree root for path walking to the
+ * subvol we want.
+ */
+static char *setup_root_args(char *args)
+{
+ unsigned copied = 0;
+ unsigned len = strlen(args) + 2;
+ char *pos;
+ char *ret;
+
+ /*
+ * We need the same args as before, but minus
+ *
+ * subvol=a
+ *
+ * and add
+ *
+ * subvolid=0
+ *
+ * which is a difference of 2 characters, so we allocate strlen(args) +
+ * 2 characters.
+ */
+ ret = kzalloc(len * sizeof(char), GFP_NOFS);
+ if (!ret)
+ return NULL;
+ pos = strstr(args, "subvol=");
+
+ /* This shouldn't happen, but just in case.. */
+ if (!pos) {
+ kfree(ret);
+ return NULL;
+ }
+
+ /*
+ * The subvol=<> arg is not at the front of the string, copy everybody
+ * up to that into ret.
+ */
+ if (pos != args) {
+ *pos = '\0';
+ strcpy(ret, args);
+ copied += strlen(args);
+ pos++;
+ }
+
+ strncpy(ret + copied, "subvolid=0", len - copied);
+
+ /* Length of subvolid=0 */
+ copied += 10;
+
+ /*
+ * If there is no , after the subvol= option then we know there's no
+ * other options and we can just return.
+ */
+ pos = strchr(pos, ',');
+ if (!pos)
+ return ret;
+
+ /* Copy the rest of the arguments into our buffer */
+ strncpy(ret + copied, pos, len - copied);
+ copied += strlen(pos);
+
+ return ret;
+}
+
+static struct dentry *mount_subvol(const char *subvol_name, int flags,
+ const char *device_name, char *data)
+{
+ struct dentry *root;
+ struct vfsmount *mnt;
+ char *newargs;
+
+ newargs = setup_root_args(data);
+ if (!newargs)
+ return ERR_PTR(-ENOMEM);
+ mnt = vfs_kern_mount(&btrfs_fs_type, flags, device_name,
+ newargs);
+ kfree(newargs);
+ if (IS_ERR(mnt))
+ return ERR_CAST(mnt);
+
+ root = mount_subtree(mnt, subvol_name);
+
+ if (!IS_ERR(root) && !is_subvolume_inode(root->d_inode)) {
+ struct super_block *s = root->d_sb;
+ dput(root);
+ root = ERR_PTR(-EINVAL);
+ deactivate_locked_super(s);
+ printk(KERN_ERR "btrfs: '%s' is not a valid subvolume\n",
+ subvol_name);
+ }
+
+ return root;
+}
/*
* Find a superblock for the given device / mount point.
struct super_block *s;
struct dentry *root;
struct btrfs_fs_devices *fs_devices = NULL;
- struct btrfs_root *tree_root = NULL;
struct btrfs_fs_info *fs_info = NULL;
fmode_t mode = FMODE_READ;
char *subvol_name = NULL;
error = btrfs_parse_early_options(data, mode, fs_type,
&subvol_name, &subvol_objectid,
&subvol_rootid, &fs_devices);
- if (error)
+ if (error) {
+ kfree(subvol_name);
return ERR_PTR(error);
+ }
- error = btrfs_scan_one_device(device_name, mode, fs_type, &fs_devices);
- if (error)
- goto error_free_subvol_name;
+ if (subvol_name) {
+ root = mount_subvol(subvol_name, flags, device_name, data);
+ kfree(subvol_name);
+ return root;
+ }
- error = btrfs_open_devices(fs_devices, mode, fs_type);
+ error = btrfs_scan_one_device(device_name, mode, fs_type, &fs_devices);
if (error)
- goto error_free_subvol_name;
-
- if (!(flags & MS_RDONLY) && fs_devices->rw_devices == 0) {
- error = -EACCES;
- goto error_close_devices;
- }
+ return ERR_PTR(error);
/*
* Setup a dummy root and fs_info for test/set super. This is because
* then open_ctree will properly initialize everything later.
*/
fs_info = kzalloc(sizeof(struct btrfs_fs_info), GFP_NOFS);
- tree_root = kzalloc(sizeof(struct btrfs_root), GFP_NOFS);
- if (!fs_info || !tree_root) {
+ if (!fs_info)
+ return ERR_PTR(-ENOMEM);
+
+ fs_info->tree_root = kzalloc(sizeof(struct btrfs_root), GFP_NOFS);
+ if (!fs_info->tree_root) {
error = -ENOMEM;
- goto error_close_devices;
+ goto error_fs_info;
}
- fs_info->tree_root = tree_root;
+ fs_info->tree_root->fs_info = fs_info;
fs_info->fs_devices = fs_devices;
- tree_root->fs_info = fs_info;
+
+ fs_info->super_copy = kzalloc(BTRFS_SUPER_INFO_SIZE, GFP_NOFS);
+ fs_info->super_for_commit = kzalloc(BTRFS_SUPER_INFO_SIZE, GFP_NOFS);
+ if (!fs_info->super_copy || !fs_info->super_for_commit) {
+ error = -ENOMEM;
+ goto error_fs_info;
+ }
+
+ error = btrfs_open_devices(fs_devices, mode, fs_type);
+ if (error)
+ goto error_fs_info;
+
+ if (!(flags & MS_RDONLY) && fs_devices->rw_devices == 0) {
+ error = -EACCES;
+ goto error_close_devices;
+ }
bdev = fs_devices->latest_bdev;
- s = sget(fs_type, btrfs_test_super, btrfs_set_super, tree_root);
- if (IS_ERR(s))
- goto error_s;
+ s = sget(fs_type, btrfs_test_super, btrfs_set_super,
+ fs_info->tree_root);
+ if (IS_ERR(s)) {
+ error = PTR_ERR(s);
+ goto error_close_devices;
+ }
if (s->s_root) {
if ((flags ^ s->s_flags) & MS_RDONLY) {
}
btrfs_close_devices(fs_devices);
- kfree(fs_info);
- kfree(tree_root);
+ free_fs_info(fs_info);
} else {
char b[BDEVNAME_SIZE];
s->s_flags = flags | MS_NOSEC;
strlcpy(s->s_id, bdevname(bdev, b), sizeof(s->s_id));
+ btrfs_sb(s)->fs_info->bdev_holder = fs_type;
error = btrfs_fill_super(s, fs_devices, data,
flags & MS_SILENT ? 1 : 0);
if (error) {
deactivate_locked_super(s);
- goto error_free_subvol_name;
+ return ERR_PTR(error);
}
- btrfs_sb(s)->fs_info->bdev_holder = fs_type;
s->s_flags |= MS_ACTIVE;
}
- /* if they gave us a subvolume name bind mount into that */
- if (strcmp(subvol_name, ".")) {
- struct dentry *new_root;
-
- root = get_default_root(s, subvol_rootid);
- if (IS_ERR(root)) {
- error = PTR_ERR(root);
- deactivate_locked_super(s);
- goto error_free_subvol_name;
- }
-
- mutex_lock(&root->d_inode->i_mutex);
- new_root = lookup_one_len(subvol_name, root,
- strlen(subvol_name));
- mutex_unlock(&root->d_inode->i_mutex);
-
- if (IS_ERR(new_root)) {
- dput(root);
- deactivate_locked_super(s);
- error = PTR_ERR(new_root);
- goto error_free_subvol_name;
- }
- if (!new_root->d_inode) {
- dput(root);
- dput(new_root);
- deactivate_locked_super(s);
- error = -ENXIO;
- goto error_free_subvol_name;
- }
- dput(root);
- root = new_root;
- } else {
- root = get_default_root(s, subvol_objectid);
- if (IS_ERR(root)) {
- error = PTR_ERR(root);
- deactivate_locked_super(s);
- goto error_free_subvol_name;
- }
+ root = get_default_root(s, subvol_objectid);
+ if (IS_ERR(root)) {
+ deactivate_locked_super(s);
+ return root;
}
- kfree(subvol_name);
return root;
-error_s:
- error = PTR_ERR(s);
error_close_devices:
btrfs_close_devices(fs_devices);
- kfree(fs_info);
- kfree(tree_root);
-error_free_subvol_name:
- kfree(subvol_name);
+error_fs_info:
+ free_fs_info(fs_info);
return ERR_PTR(error);
}
if (root->fs_info->fs_devices->rw_devices == 0)
return -EACCES;
- if (btrfs_super_log_root(&root->fs_info->super_copy) != 0)
+ if (btrfs_super_log_root(root->fs_info->super_copy) != 0)
return -EINVAL;
ret = btrfs_cleanup_fs_roots(root->fs_info);
static int btrfs_statfs(struct dentry *dentry, struct kstatfs *buf)
{
struct btrfs_root *root = btrfs_sb(dentry->d_sb);
- struct btrfs_super_block *disk_super = &root->fs_info->super_copy;
+ struct btrfs_super_block *disk_super = root->fs_info->super_copy;
struct list_head *head = &root->fs_info->space_info;
struct btrfs_space_info *found;
u64 total_used = 0;
struct btrfs_transaction *cur_trans;
spin_lock(&root->fs_info->trans_lock);
+loop:
if (root->fs_info->trans_no_join) {
if (!nofail) {
spin_unlock(&root->fs_info->trans_lock);
cur_trans = kmem_cache_alloc(btrfs_transaction_cachep, GFP_NOFS);
if (!cur_trans)
return -ENOMEM;
+
spin_lock(&root->fs_info->trans_lock);
if (root->fs_info->running_transaction) {
+ /*
+ * someone started a transaction after we unlocked. Make sure
+ * to redo the trans_no_join checks above
+ */
kmem_cache_free(btrfs_transaction_cachep, cur_trans);
cur_trans = root->fs_info->running_transaction;
- atomic_inc(&cur_trans->use_count);
- atomic_inc(&cur_trans->num_writers);
- cur_trans->num_joined++;
- spin_unlock(&root->fs_info->trans_lock);
- return 0;
+ goto loop;
}
+
atomic_set(&cur_trans->num_writers, 1);
cur_trans->num_joined = 0;
init_waitqueue_head(&cur_trans->writer_wait);
*/
if (num_items > 0 && root != root->fs_info->chunk_root) {
num_bytes = btrfs_calc_trans_metadata_size(root, num_items);
- ret = btrfs_block_rsv_add(NULL, root,
+ ret = btrfs_block_rsv_add(root,
&root->fs_info->trans_block_rsv,
num_bytes);
if (ret)
struct btrfs_root *root)
{
int ret;
- ret = btrfs_block_rsv_check(trans, root,
- &root->fs_info->global_block_rsv, 0, 5);
+
+ ret = btrfs_block_rsv_check(root, &root->fs_info->global_block_rsv, 5);
return ret ? 1 : 0;
}
struct btrfs_root *root)
{
struct btrfs_transaction *cur_trans = trans->transaction;
+ struct btrfs_block_rsv *rsv = trans->block_rsv;
int updates;
smp_mb();
if (cur_trans->blocked || cur_trans->delayed_refs.flushing)
return 1;
+ /*
+ * We need to do this in case we're deleting csums so the global block
+ * rsv get's used instead of the csum block rsv.
+ */
+ trans->block_rsv = NULL;
+
updates = trans->delayed_ref_updates;
trans->delayed_ref_updates = 0;
if (updates)
btrfs_run_delayed_refs(trans, root, updates);
+ trans->block_rsv = rsv;
+
return should_end_transaction(trans, root);
}
return 0;
}
+ btrfs_trans_release_metadata(trans, root);
+ trans->block_rsv = NULL;
while (count < 4) {
unsigned long cur = trans->delayed_ref_updates;
trans->delayed_ref_updates = 0;
count++;
}
- btrfs_trans_release_metadata(trans, root);
-
if (lock && !atomic_read(&root->fs_info->open_ioctl_trans) &&
should_end_transaction(trans, root)) {
trans->transaction->blocked = 1;
int btrfs_write_marked_extents(struct btrfs_root *root,
struct extent_io_tree *dirty_pages, int mark)
{
- int ret;
int err = 0;
int werr = 0;
- struct page *page;
- struct inode *btree_inode = root->fs_info->btree_inode;
+ struct address_space *mapping = root->fs_info->btree_inode->i_mapping;
u64 start = 0;
u64 end;
- unsigned long index;
-
- while (1) {
- ret = find_first_extent_bit(dirty_pages, start, &start, &end,
- mark);
- if (ret)
- break;
- while (start <= end) {
- cond_resched();
-
- index = start >> PAGE_CACHE_SHIFT;
- start = (u64)(index + 1) << PAGE_CACHE_SHIFT;
- page = find_get_page(btree_inode->i_mapping, index);
- if (!page)
- continue;
-
- btree_lock_page_hook(page);
- if (!page->mapping) {
- unlock_page(page);
- page_cache_release(page);
- continue;
- }
- if (PageWriteback(page)) {
- if (PageDirty(page))
- wait_on_page_writeback(page);
- else {
- unlock_page(page);
- page_cache_release(page);
- continue;
- }
- }
- err = write_one_page(page, 0);
- if (err)
- werr = err;
- page_cache_release(page);
- }
+ while (!find_first_extent_bit(dirty_pages, start, &start, &end,
+ mark)) {
+ convert_extent_bit(dirty_pages, start, end, EXTENT_NEED_WAIT, mark,
+ GFP_NOFS);
+ err = filemap_fdatawrite_range(mapping, start, end);
+ if (err)
+ werr = err;
+ cond_resched();
+ start = end + 1;
}
if (err)
werr = err;
int btrfs_wait_marked_extents(struct btrfs_root *root,
struct extent_io_tree *dirty_pages, int mark)
{
- int ret;
int err = 0;
int werr = 0;
- struct page *page;
- struct inode *btree_inode = root->fs_info->btree_inode;
+ struct address_space *mapping = root->fs_info->btree_inode->i_mapping;
u64 start = 0;
u64 end;
- unsigned long index;
-
- while (1) {
- ret = find_first_extent_bit(dirty_pages, start, &start, &end,
- mark);
- if (ret)
- break;
- clear_extent_bits(dirty_pages, start, end, mark, GFP_NOFS);
- while (start <= end) {
- index = start >> PAGE_CACHE_SHIFT;
- start = (u64)(index + 1) << PAGE_CACHE_SHIFT;
- page = find_get_page(btree_inode->i_mapping, index);
- if (!page)
- continue;
- if (PageDirty(page)) {
- btree_lock_page_hook(page);
- wait_on_page_writeback(page);
- err = write_one_page(page, 0);
- if (err)
- werr = err;
- }
- wait_on_page_writeback(page);
- page_cache_release(page);
- cond_resched();
- }
+ while (!find_first_extent_bit(dirty_pages, start, &start, &end,
+ EXTENT_NEED_WAIT)) {
+ clear_extent_bits(dirty_pages, start, end, EXTENT_NEED_WAIT, GFP_NOFS);
+ err = filemap_fdatawait_range(mapping, start, end);
+ if (err)
+ werr = err;
+ cond_resched();
+ start = end + 1;
}
if (err)
werr = err;
ret = btrfs_write_marked_extents(root, dirty_pages, mark);
ret2 = btrfs_wait_marked_extents(root, dirty_pages, mark);
- return ret || ret2;
+
+ if (ret)
+ return ret;
+ if (ret2)
+ return ret2;
+ return 0;
}
int btrfs_write_and_wait_transaction(struct btrfs_trans_handle *trans,
}
btrfs_reloc_pre_snapshot(trans, pending, &to_reserve);
- btrfs_orphan_pre_snapshot(trans, pending, &to_reserve);
if (to_reserve > 0) {
- ret = btrfs_block_rsv_add(trans, root, &pending->block_rsv,
- to_reserve);
+ ret = btrfs_block_rsv_add_noflush(root, &pending->block_rsv,
+ to_reserve);
if (ret) {
pending->error = ret;
goto fail;
BUG_ON(IS_ERR(pending->snap));
btrfs_reloc_post_snapshot(trans, pending);
- btrfs_orphan_post_snapshot(trans, pending);
fail:
kfree(new_root_item);
trans->block_rsv = rsv;
struct btrfs_root_item *root_item;
struct btrfs_super_block *super;
- super = &root->fs_info->super_copy;
+ super = root->fs_info->super_copy;
root_item = &root->fs_info->chunk_root->root_item;
super->chunk_root = root_item->bytenr;
super->root = root_item->bytenr;
super->generation = root_item->generation;
super->root_level = root_item->level;
- if (super->cache_generation != 0 || btrfs_test_opt(root, SPACE_CACHE))
+ if (btrfs_test_opt(root, SPACE_CACHE))
super->cache_generation = root_item->generation;
}
btrfs_run_ordered_operations(root, 0);
+ btrfs_trans_release_metadata(trans, root);
+ trans->block_rsv = NULL;
+
/* make a pass through all the delayed refs we have so far
* any runnings procs may add more while we are here
*/
ret = btrfs_run_delayed_refs(trans, root, 0);
BUG_ON(ret);
- btrfs_trans_release_metadata(trans, root);
-
cur_trans = trans->transaction;
/*
* set the flushing flag so procs in this transaction have to
update_super_roots(root);
if (!root->fs_info->log_root_recovering) {
- btrfs_set_super_log_root(&root->fs_info->super_copy, 0);
- btrfs_set_super_log_root_level(&root->fs_info->super_copy, 0);
+ btrfs_set_super_log_root(root->fs_info->super_copy, 0);
+ btrfs_set_super_log_root_level(root->fs_info->super_copy, 0);
}
- memcpy(&root->fs_info->super_for_commit, &root->fs_info->super_copy,
- sizeof(root->fs_info->super_copy));
+ memcpy(root->fs_info->super_for_commit, root->fs_info->super_copy,
+ sizeof(*root->fs_info->super_copy));
trans->transaction->blocked = 0;
spin_lock(&root->fs_info->trans_lock);
struct walk_control *wc, u64 gen)
{
if (wc->pin)
- btrfs_pin_extent(log->fs_info->extent_root,
- eb->start, eb->len, 0);
+ btrfs_pin_extent_for_log_replay(wc->trans,
+ log->fs_info->extent_root,
+ eb->start, eb->len);
if (btrfs_buffer_uptodate(eb, gen)) {
if (wc->write)
WARN_ON(root_owner !=
BTRFS_TREE_LOG_OBJECTID);
- ret = btrfs_free_reserved_extent(root,
+ ret = btrfs_free_and_pin_reserved_extent(root,
bytenr, blocksize);
BUG_ON(ret);
}
btrfs_tree_unlock(next);
WARN_ON(root_owner != BTRFS_TREE_LOG_OBJECTID);
- ret = btrfs_free_reserved_extent(root,
+ ret = btrfs_free_and_pin_reserved_extent(root,
path->nodes[*level]->start,
path->nodes[*level]->len);
BUG_ON(ret);
WARN_ON(log->root_key.objectid !=
BTRFS_TREE_LOG_OBJECTID);
- ret = btrfs_free_reserved_extent(log, next->start,
+ ret = btrfs_free_and_pin_reserved_extent(log, next->start,
next->len);
BUG_ON(ret);
}
/* wait for previous tree log sync to complete */
if (atomic_read(&root->log_commit[(index1 + 1) % 2]))
wait_log_commit(trans, root, root->log_transid - 1);
-
while (1) {
unsigned long batch = root->log_batch;
- if (root->log_multiple_pids) {
+ /* when we're on an ssd, just kick the log commit out */
+ if (!btrfs_test_opt(root, SSD) && root->log_multiple_pids) {
mutex_unlock(&root->log_mutex);
schedule_timeout_uninterruptible(1);
mutex_lock(&root->log_mutex);
BUG_ON(ret);
btrfs_wait_marked_extents(log, &log->dirty_log_pages, mark);
- btrfs_set_super_log_root(&root->fs_info->super_for_commit,
+ btrfs_set_super_log_root(root->fs_info->super_for_commit,
log_root_tree->node->start);
- btrfs_set_super_log_root_level(&root->fs_info->super_for_commit,
+ btrfs_set_super_log_root_level(root->fs_info->super_for_commit,
btrfs_header_level(log_root_tree->node));
log_root_tree->log_batch = 0;
}
INIT_LIST_HEAD(&device->dev_alloc_list);
+ /* init readahead state */
+ spin_lock_init(&device->reada_lock);
+ device->reada_curr_zone = NULL;
+ atomic_set(&device->reada_in_flight, 0);
+ device->reada_next = 0;
+ INIT_RADIX_TREE(&device->reada_zones, GFP_NOFS & ~__GFP_WAIT);
+ INIT_RADIX_TREE(&device->reada_extents, GFP_NOFS & ~__GFP_WAIT);
+
mutex_lock(&fs_devices->device_list_mutex);
list_add_rcu(&device->dev_list, &fs_devices->devices);
mutex_unlock(&fs_devices->device_list_mutex);
set_blocksize(bdev, 4096);
bh = btrfs_read_dev_super(bdev);
- if (!bh) {
- ret = -EINVAL;
+ if (!bh)
goto error_close;
- }
disk_super = (struct btrfs_super_block *)bh->b_data;
devid = btrfs_stack_device_id(&disk_super->dev_item);
continue;
}
if (fs_devices->open_devices == 0) {
- ret = -EIO;
+ ret = -EINVAL;
goto out;
}
fs_devices->seeding = seeding;
key.objectid = device->devid;
key.offset = start;
key.type = BTRFS_DEV_EXTENT_KEY;
-
+again:
ret = btrfs_search_slot(trans, root, &key, path, -1, 1);
if (ret > 0) {
ret = btrfs_previous_item(root, path, key.objectid,
struct btrfs_dev_extent);
BUG_ON(found_key.offset > start || found_key.offset +
btrfs_dev_extent_length(leaf, extent) < start);
+ key = found_key;
+ btrfs_release_path(path);
+ goto again;
} else if (ret == 0) {
leaf = path->nodes[0];
extent = btrfs_item_ptr(leaf, path->slots[0],
}
BUG_ON(ret);
- if (device->bytes_used > 0)
- device->bytes_used -= btrfs_dev_extent_length(leaf, extent);
+ if (device->bytes_used > 0) {
+ u64 len = btrfs_dev_extent_length(leaf, extent);
+ device->bytes_used -= len;
+ spin_lock(&root->fs_info->free_chunk_lock);
+ root->fs_info->free_chunk_space += len;
+ spin_unlock(&root->fs_info->free_chunk_lock);
+ }
ret = btrfs_del_item(trans, root, path);
out:
if (ret)
goto error_undo;
+ spin_lock(&root->fs_info->free_chunk_lock);
+ root->fs_info->free_chunk_space = device->total_bytes -
+ device->bytes_used;
+ spin_unlock(&root->fs_info->free_chunk_lock);
+
device->in_fs_metadata = 0;
btrfs_scrub_cancel_dev(root, device);
call_rcu(&device->rcu, free_device);
mutex_unlock(&root->fs_info->fs_devices->device_list_mutex);
- num_devices = btrfs_super_num_devices(&root->fs_info->super_copy) - 1;
- btrfs_set_super_num_devices(&root->fs_info->super_copy, num_devices);
+ num_devices = btrfs_super_num_devices(root->fs_info->super_copy) - 1;
+ btrfs_set_super_num_devices(root->fs_info->super_copy, num_devices);
if (cur_devices->open_devices == 0) {
struct btrfs_fs_devices *fs_devices;
struct btrfs_fs_devices *fs_devices = root->fs_info->fs_devices;
struct btrfs_fs_devices *old_devices;
struct btrfs_fs_devices *seed_devices;
- struct btrfs_super_block *disk_super = &root->fs_info->super_copy;
+ struct btrfs_super_block *disk_super = root->fs_info->super_copy;
struct btrfs_device *device;
u64 super_flags;
root->fs_info->fs_devices->num_can_discard++;
root->fs_info->fs_devices->total_rw_bytes += device->total_bytes;
+ spin_lock(&root->fs_info->free_chunk_lock);
+ root->fs_info->free_chunk_space += device->total_bytes;
+ spin_unlock(&root->fs_info->free_chunk_lock);
+
if (!blk_queue_nonrot(bdev_get_queue(bdev)))
root->fs_info->fs_devices->rotating = 1;
- total_bytes = btrfs_super_total_bytes(&root->fs_info->super_copy);
- btrfs_set_super_total_bytes(&root->fs_info->super_copy,
+ total_bytes = btrfs_super_total_bytes(root->fs_info->super_copy);
+ btrfs_set_super_total_bytes(root->fs_info->super_copy,
total_bytes + device->total_bytes);
- total_bytes = btrfs_super_num_devices(&root->fs_info->super_copy);
- btrfs_set_super_num_devices(&root->fs_info->super_copy,
+ total_bytes = btrfs_super_num_devices(root->fs_info->super_copy);
+ btrfs_set_super_num_devices(root->fs_info->super_copy,
total_bytes + 1);
mutex_unlock(&root->fs_info->fs_devices->device_list_mutex);
struct btrfs_device *device, u64 new_size)
{
struct btrfs_super_block *super_copy =
- &device->dev_root->fs_info->super_copy;
+ device->dev_root->fs_info->super_copy;
u64 old_total = btrfs_super_total_bytes(super_copy);
u64 diff = new_size - device->total_bytes;
static int btrfs_del_sys_chunk(struct btrfs_root *root, u64 chunk_objectid, u64
chunk_offset)
{
- struct btrfs_super_block *super_copy = &root->fs_info->super_copy;
+ struct btrfs_super_block *super_copy = root->fs_info->super_copy;
struct btrfs_disk_key *disk_key;
struct btrfs_chunk *chunk;
u8 *ptr;
bool retried = false;
struct extent_buffer *l;
struct btrfs_key key;
- struct btrfs_super_block *super_copy = &root->fs_info->super_copy;
+ struct btrfs_super_block *super_copy = root->fs_info->super_copy;
u64 old_total = btrfs_super_total_bytes(super_copy);
u64 old_size = device->total_bytes;
u64 diff = device->total_bytes - new_size;
lock_chunks(root);
device->total_bytes = new_size;
- if (device->writeable)
+ if (device->writeable) {
device->fs_devices->total_rw_bytes -= diff;
+ spin_lock(&root->fs_info->free_chunk_lock);
+ root->fs_info->free_chunk_space -= diff;
+ spin_unlock(&root->fs_info->free_chunk_lock);
+ }
unlock_chunks(root);
again:
device->total_bytes = old_size;
if (device->writeable)
device->fs_devices->total_rw_bytes += diff;
+ spin_lock(&root->fs_info->free_chunk_lock);
+ root->fs_info->free_chunk_space += diff;
+ spin_unlock(&root->fs_info->free_chunk_lock);
unlock_chunks(root);
goto done;
}
struct btrfs_key *key,
struct btrfs_chunk *chunk, int item_size)
{
- struct btrfs_super_block *super_copy = &root->fs_info->super_copy;
+ struct btrfs_super_block *super_copy = root->fs_info->super_copy;
struct btrfs_disk_key disk_key;
u32 array_size;
u8 *ptr;
index++;
}
+ spin_lock(&extent_root->fs_info->free_chunk_lock);
+ extent_root->fs_info->free_chunk_space -= (stripe_size *
+ map->num_stripes);
+ spin_unlock(&extent_root->fs_info->free_chunk_lock);
+
index = 0;
stripe = &chunk->stripe;
while (index < map->num_stripes) {
static int __btrfs_map_block(struct btrfs_mapping_tree *map_tree, int rw,
u64 logical, u64 *length,
- struct btrfs_multi_bio **multi_ret,
+ struct btrfs_bio **bbio_ret,
int mirror_num)
{
struct extent_map *em;
int i;
int num_stripes;
int max_errors = 0;
- struct btrfs_multi_bio *multi = NULL;
+ struct btrfs_bio *bbio = NULL;
- if (multi_ret && !(rw & (REQ_WRITE | REQ_DISCARD)))
+ if (bbio_ret && !(rw & (REQ_WRITE | REQ_DISCARD)))
stripes_allocated = 1;
again:
- if (multi_ret) {
- multi = kzalloc(btrfs_multi_bio_size(stripes_allocated),
+ if (bbio_ret) {
+ bbio = kzalloc(btrfs_bio_size(stripes_allocated),
GFP_NOFS);
- if (!multi)
+ if (!bbio)
return -ENOMEM;
- atomic_set(&multi->error, 0);
+ atomic_set(&bbio->error, 0);
}
read_lock(&em_tree->lock);
if (mirror_num > map->num_stripes)
mirror_num = 0;
- /* if our multi bio struct is too small, back off and try again */
+ /* if our btrfs_bio struct is too small, back off and try again */
if (rw & REQ_WRITE) {
if (map->type & (BTRFS_BLOCK_GROUP_RAID1 |
BTRFS_BLOCK_GROUP_DUP)) {
stripes_required = map->num_stripes;
}
}
- if (multi_ret && (rw & (REQ_WRITE | REQ_DISCARD)) &&
+ if (bbio_ret && (rw & (REQ_WRITE | REQ_DISCARD)) &&
stripes_allocated < stripes_required) {
stripes_allocated = map->num_stripes;
free_extent_map(em);
- kfree(multi);
+ kfree(bbio);
goto again;
}
stripe_nr = offset;
*length = em->len - offset;
}
- if (!multi_ret)
+ if (!bbio_ret)
goto out;
num_stripes = 1;
stripe_index = find_live_mirror(map, 0,
map->num_stripes,
current->pid % map->num_stripes);
+ mirror_num = stripe_index + 1;
}
} else if (map->type & BTRFS_BLOCK_GROUP_DUP) {
- if (rw & (REQ_WRITE | REQ_DISCARD))
+ if (rw & (REQ_WRITE | REQ_DISCARD)) {
num_stripes = map->num_stripes;
- else if (mirror_num)
+ } else if (mirror_num) {
stripe_index = mirror_num - 1;
+ } else {
+ mirror_num = 1;
+ }
} else if (map->type & BTRFS_BLOCK_GROUP_RAID10) {
int factor = map->num_stripes / map->sub_stripes;
stripe_index = find_live_mirror(map, stripe_index,
map->sub_stripes, stripe_index +
current->pid % map->sub_stripes);
+ mirror_num = stripe_index + 1;
}
} else {
/*
* stripe_index is the number of our device in the stripe array
*/
stripe_index = do_div(stripe_nr, map->num_stripes);
+ mirror_num = stripe_index + 1;
}
BUG_ON(stripe_index >= map->num_stripes);
if (rw & REQ_DISCARD) {
for (i = 0; i < num_stripes; i++) {
- multi->stripes[i].physical =
+ bbio->stripes[i].physical =
map->stripes[stripe_index].physical +
stripe_offset + stripe_nr * map->stripe_len;
- multi->stripes[i].dev = map->stripes[stripe_index].dev;
+ bbio->stripes[i].dev = map->stripes[stripe_index].dev;
if (map->type & BTRFS_BLOCK_GROUP_RAID0) {
u64 stripes;
}
stripes = stripe_nr_end - 1 - j;
do_div(stripes, map->num_stripes);
- multi->stripes[i].length = map->stripe_len *
+ bbio->stripes[i].length = map->stripe_len *
(stripes - stripe_nr + 1);
if (i == 0) {
- multi->stripes[i].length -=
+ bbio->stripes[i].length -=
stripe_offset;
stripe_offset = 0;
}
if (stripe_index == last_stripe)
- multi->stripes[i].length -=
+ bbio->stripes[i].length -=
stripe_end_offset;
} else if (map->type & BTRFS_BLOCK_GROUP_RAID10) {
u64 stripes;
}
stripes = stripe_nr_end - 1 - j;
do_div(stripes, factor);
- multi->stripes[i].length = map->stripe_len *
+ bbio->stripes[i].length = map->stripe_len *
(stripes - stripe_nr + 1);
if (i < map->sub_stripes) {
- multi->stripes[i].length -=
+ bbio->stripes[i].length -=
stripe_offset;
if (i == map->sub_stripes - 1)
stripe_offset = 0;
if (stripe_index >= last_stripe &&
stripe_index <= (last_stripe +
map->sub_stripes - 1)) {
- multi->stripes[i].length -=
+ bbio->stripes[i].length -=
stripe_end_offset;
}
} else
- multi->stripes[i].length = *length;
+ bbio->stripes[i].length = *length;
stripe_index++;
if (stripe_index == map->num_stripes) {
}
} else {
for (i = 0; i < num_stripes; i++) {
- multi->stripes[i].physical =
+ bbio->stripes[i].physical =
map->stripes[stripe_index].physical +
stripe_offset +
stripe_nr * map->stripe_len;
- multi->stripes[i].dev =
+ bbio->stripes[i].dev =
map->stripes[stripe_index].dev;
stripe_index++;
}
}
- if (multi_ret) {
- *multi_ret = multi;
- multi->num_stripes = num_stripes;
- multi->max_errors = max_errors;
+ if (bbio_ret) {
+ *bbio_ret = bbio;
+ bbio->num_stripes = num_stripes;
+ bbio->max_errors = max_errors;
+ bbio->mirror_num = mirror_num;
}
out:
free_extent_map(em);
int btrfs_map_block(struct btrfs_mapping_tree *map_tree, int rw,
u64 logical, u64 *length,
- struct btrfs_multi_bio **multi_ret, int mirror_num)
+ struct btrfs_bio **bbio_ret, int mirror_num)
{
- return __btrfs_map_block(map_tree, rw, logical, length, multi_ret,
+ return __btrfs_map_block(map_tree, rw, logical, length, bbio_ret,
mirror_num);
}
return 0;
}
-static void end_bio_multi_stripe(struct bio *bio, int err)
+static void btrfs_end_bio(struct bio *bio, int err)
{
- struct btrfs_multi_bio *multi = bio->bi_private;
+ struct btrfs_bio *bbio = bio->bi_private;
int is_orig_bio = 0;
if (err)
- atomic_inc(&multi->error);
+ atomic_inc(&bbio->error);
- if (bio == multi->orig_bio)
+ if (bio == bbio->orig_bio)
is_orig_bio = 1;
- if (atomic_dec_and_test(&multi->stripes_pending)) {
+ if (atomic_dec_and_test(&bbio->stripes_pending)) {
if (!is_orig_bio) {
bio_put(bio);
- bio = multi->orig_bio;
+ bio = bbio->orig_bio;
}
- bio->bi_private = multi->private;
- bio->bi_end_io = multi->end_io;
+ bio->bi_private = bbio->private;
+ bio->bi_end_io = bbio->end_io;
+ bio->bi_bdev = (struct block_device *)
+ (unsigned long)bbio->mirror_num;
/* only send an error to the higher layers if it is
* beyond the tolerance of the multi-bio
*/
- if (atomic_read(&multi->error) > multi->max_errors) {
+ if (atomic_read(&bbio->error) > bbio->max_errors) {
err = -EIO;
} else if (err) {
/*
set_bit(BIO_UPTODATE, &bio->bi_flags);
err = 0;
}
- kfree(multi);
+ kfree(bbio);
bio_endio(bio, err);
} else if (!is_orig_bio) {
u64 logical = (u64)bio->bi_sector << 9;
u64 length = 0;
u64 map_length;
- struct btrfs_multi_bio *multi = NULL;
int ret;
int dev_nr = 0;
int total_devs = 1;
+ struct btrfs_bio *bbio = NULL;
length = bio->bi_size;
map_tree = &root->fs_info->mapping_tree;
map_length = length;
- ret = btrfs_map_block(map_tree, rw, logical, &map_length, &multi,
+ ret = btrfs_map_block(map_tree, rw, logical, &map_length, &bbio,
mirror_num);
BUG_ON(ret);
- total_devs = multi->num_stripes;
+ total_devs = bbio->num_stripes;
if (map_length < length) {
printk(KERN_CRIT "mapping failed logical %llu bio len %llu "
"len %llu\n", (unsigned long long)logical,
(unsigned long long)map_length);
BUG();
}
- multi->end_io = first_bio->bi_end_io;
- multi->private = first_bio->bi_private;
- multi->orig_bio = first_bio;
- atomic_set(&multi->stripes_pending, multi->num_stripes);
+
+ bbio->orig_bio = first_bio;
+ bbio->private = first_bio->bi_private;
+ bbio->end_io = first_bio->bi_end_io;
+ atomic_set(&bbio->stripes_pending, bbio->num_stripes);
while (dev_nr < total_devs) {
- if (total_devs > 1) {
- if (dev_nr < total_devs - 1) {
- bio = bio_clone(first_bio, GFP_NOFS);
- BUG_ON(!bio);
- } else {
- bio = first_bio;
- }
- bio->bi_private = multi;
- bio->bi_end_io = end_bio_multi_stripe;
+ if (dev_nr < total_devs - 1) {
+ bio = bio_clone(first_bio, GFP_NOFS);
+ BUG_ON(!bio);
+ } else {
+ bio = first_bio;
}
- bio->bi_sector = multi->stripes[dev_nr].physical >> 9;
- dev = multi->stripes[dev_nr].dev;
+ bio->bi_private = bbio;
+ bio->bi_end_io = btrfs_end_bio;
+ bio->bi_sector = bbio->stripes[dev_nr].physical >> 9;
+ dev = bbio->stripes[dev_nr].dev;
if (dev && dev->bdev && (rw != WRITE || dev->writeable)) {
+ pr_debug("btrfs_map_bio: rw %d, secor=%llu, dev=%lu "
+ "(%s id %llu), size=%u\n", rw,
+ (u64)bio->bi_sector, (u_long)dev->bdev->bd_dev,
+ dev->name, dev->devid, bio->bi_size);
bio->bi_bdev = dev->bdev;
if (async_submit)
schedule_bio(root, dev, rw, bio);
}
dev_nr++;
}
- if (total_devs == 1)
- kfree(multi);
return 0;
}
fill_device_from_item(leaf, dev_item, device);
device->dev_root = root->fs_info->dev_root;
device->in_fs_metadata = 1;
- if (device->writeable)
+ if (device->writeable) {
device->fs_devices->total_rw_bytes += device->total_bytes;
+ spin_lock(&root->fs_info->free_chunk_lock);
+ root->fs_info->free_chunk_space += device->total_bytes -
+ device->bytes_used;
+ spin_unlock(&root->fs_info->free_chunk_lock);
+ }
ret = 0;
return ret;
}
int btrfs_read_sys_array(struct btrfs_root *root)
{
- struct btrfs_super_block *super_copy = &root->fs_info->super_copy;
+ struct btrfs_super_block *super_copy = root->fs_info->super_copy;
struct extent_buffer *sb;
struct btrfs_disk_key *disk_key;
struct btrfs_chunk *chunk;
struct btrfs_work work;
struct rcu_head rcu;
struct work_struct rcu_work;
+
+ /* readahead state */
+ spinlock_t reada_lock;
+ atomic_t reada_in_flight;
+ u64 reada_next;
+ struct reada_zone *reada_curr_zone;
+ struct radix_tree_root reada_zones;
+ struct radix_tree_root reada_extents;
};
struct btrfs_fs_devices {
u64 length; /* only used for discard mappings */
};
-struct btrfs_multi_bio {
+struct btrfs_bio;
+typedef void (btrfs_bio_end_io_t) (struct btrfs_bio *bio, int err);
+
+struct btrfs_bio {
atomic_t stripes_pending;
bio_end_io_t *end_io;
struct bio *orig_bio;
atomic_t error;
int max_errors;
int num_stripes;
+ int mirror_num;
struct btrfs_bio_stripe stripes[];
};
int btrfs_account_dev_extents_size(struct btrfs_device *device, u64 start,
u64 end, u64 *length);
-#define btrfs_multi_bio_size(n) (sizeof(struct btrfs_multi_bio) + \
+#define btrfs_bio_size(n) (sizeof(struct btrfs_bio) + \
(sizeof(struct btrfs_bio_stripe) * (n)))
int btrfs_alloc_dev_extent(struct btrfs_trans_handle *trans,
u64 chunk_offset, u64 start, u64 num_bytes);
int btrfs_map_block(struct btrfs_mapping_tree *map_tree, int rw,
u64 logical, u64 *length,
- struct btrfs_multi_bio **multi_ret, int mirror_num);
+ struct btrfs_bio **bbio_ret, int mirror_num);
int btrfs_rmap_block(struct btrfs_mapping_tree *map_tree,
u64 chunk_start, u64 physical, u64 devid,
u64 **logical, int *naddrs, int *stripe_len);
again:
ret = btrfs_insert_xattr_item(trans, root, path, btrfs_ino(inode),
name, name_len, value, size);
+ /*
+ * If we're setting an xattr to a new value but the new value is say
+ * exactly BTRFS_MAX_XATTR_SIZE, we could end up with EOVERFLOW getting
+ * back from split_leaf. This is because it thinks we'll be extending
+ * the existing item size, but we're asking for enough space to add the
+ * item itself. So if we get EOVERFLOW just set ret to EEXIST and let
+ * the rest of the function figure it out.
+ */
+ if (ret == -EOVERFLOW)
+ ret = -EEXIST;
+
if (ret == -EEXIST) {
if (flags & XATTR_CREATE)
goto out;
struct zone *zone;
int nid;
- wakeup_flusher_threads(1024);
+ wakeup_flusher_threads(1024, WB_REASON_FREE_MORE_MEM);
yield();
for_each_online_node(nid) {
ci->i_rdcache_gen++;
/*
- * if we are newly issued FILE_SHARED, clear I_COMPLETE; we
+ * if we are newly issued FILE_SHARED, clear D_COMPLETE; we
* don't know what happened to this directory while we didn't
* have the cap.
*/
if ((issued & CEPH_CAP_FILE_SHARED) &&
(had & CEPH_CAP_FILE_SHARED) == 0) {
ci->i_shared_gen++;
- if (S_ISDIR(ci->vfs_inode.i_mode)) {
- dout(" marking %p NOT complete\n", &ci->vfs_inode);
- ci->i_ceph_flags &= ~CEPH_I_COMPLETE;
- }
+ if (S_ISDIR(ci->vfs_inode.i_mode))
+ ceph_dir_clear_complete(&ci->vfs_inode);
}
}
* falling back to a "normal" sync readdir if any dentries in the dir
* are dropped.
*
- * I_COMPLETE tells indicates we have all dentries in the dir. It is
+ * D_COMPLETE tells indicates we have all dentries in the dir. It is
* defined IFF we hold CEPH_CAP_FILE_SHARED (which will be revoked by
* the MDS if/when the directory is modified).
*/
filp->f_pos++;
/* make sure a dentry wasn't dropped while we didn't have parent lock */
- if (!ceph_i_test(dir, CEPH_I_COMPLETE)) {
- dout(" lost I_COMPLETE on %p; falling back to mds\n", dir);
+ if (!ceph_dir_test_complete(dir)) {
+ dout(" lost D_COMPLETE on %p; falling back to mds\n", dir);
err = -EAGAIN;
goto out;
}
if ((filp->f_pos == 2 || fi->dentry) &&
!ceph_test_mount_opt(fsc, NOASYNCREADDIR) &&
ceph_snap(inode) != CEPH_SNAPDIR &&
- (ci->i_ceph_flags & CEPH_I_COMPLETE) &&
+ ceph_dir_test_complete(inode) &&
__ceph_caps_issued_mask(ci, CEPH_CAP_FILE_SHARED, 1)) {
spin_unlock(&inode->i_lock);
err = __dcache_readdir(filp, dirent, filldir);
if (!req->r_did_prepopulate) {
dout("readdir !did_prepopulate");
- fi->dir_release_count--; /* preclude I_COMPLETE */
+ fi->dir_release_count--; /* preclude D_COMPLETE */
}
/* note next offset and last dentry name */
*/
spin_lock(&inode->i_lock);
if (ci->i_release_count == fi->dir_release_count) {
- dout(" marking %p complete\n", inode);
- /* ci->i_ceph_flags |= CEPH_I_COMPLETE; */
+ ceph_dir_set_complete(inode);
ci->i_max_offset = filp->f_pos;
}
spin_unlock(&inode->i_lock);
fsc->mount_options->snapdir_name,
dentry->d_name.len) &&
!is_root_ceph_dentry(dir, dentry) &&
- (ci->i_ceph_flags & CEPH_I_COMPLETE) &&
+ ceph_dir_test_complete(dir) &&
(__ceph_caps_issued_mask(ci, CEPH_CAP_FILE_SHARED, 1))) {
spin_unlock(&dir->i_lock);
dout(" dir %p complete, -ENOENT\n", dir);
*/
/* d_move screws up d_subdirs order */
- ceph_i_clear(new_dir, CEPH_I_COMPLETE);
+ ceph_dir_clear_complete(new_dir);
d_move(old_dentry, new_dentry);
return 1;
}
+/*
+ * Set/clear/test dir complete flag on the dir's dentry.
+ */
+static struct dentry * __d_find_any_alias(struct inode *inode)
+{
+ struct dentry *alias;
+
+ if (list_empty(&inode->i_dentry))
+ return NULL;
+ alias = list_first_entry(&inode->i_dentry, struct dentry, d_alias);
+ return alias;
+}
+
+void ceph_dir_set_complete(struct inode *inode)
+{
+ struct dentry *dentry = __d_find_any_alias(inode);
+
+ if (dentry && ceph_dentry(dentry)) {
+ dout(" marking %p (%p) complete\n", inode, dentry);
+ set_bit(CEPH_D_COMPLETE, &ceph_dentry(dentry)->flags);
+ }
+}
+
+void ceph_dir_clear_complete(struct inode *inode)
+{
+ struct dentry *dentry = __d_find_any_alias(inode);
+ if (dentry && ceph_dentry(dentry)) {
+ dout(" marking %p (%p) NOT complete\n", inode, dentry);
+ clear_bit(CEPH_D_COMPLETE, &ceph_dentry(dentry)->flags);
+ }
+}
+
+bool ceph_dir_test_complete(struct inode *inode)
+{
+ struct dentry *dentry = __d_find_any_alias(inode);
+
+ if (dentry && ceph_dentry(dentry))
+ return test_bit(CEPH_D_COMPLETE, &ceph_dentry(dentry)->flags);
+ return false;
+}
+
+/*
+ * When the VFS prunes a dentry from the cache, we need to clear the
+ * complete flag on the parent directory.
+ *
+ * Called under dentry->d_lock.
+ */
+static void ceph_d_prune(struct dentry *dentry)
+{
+ struct ceph_dentry_info *di;
+
+ dout("ceph_d_prune %p\n", dentry);
+
+ /* do we have a valid parent? */
+ if (!dentry->d_parent || IS_ROOT(dentry))
+ return;
+
+ /* if we are not hashed, we don't affect D_COMPLETE */
+ if (d_unhashed(dentry))
+ return;
+
+ /*
+ * we hold d_lock, so d_parent is stable, and d_fsdata is never
+ * cleared until d_release
+ */
+ di = ceph_dentry(dentry->d_parent);
+ clear_bit(CEPH_D_COMPLETE, &di->flags);
+}
/*
* read() on a dir. This weird interface hack only works if mounted
const struct dentry_operations ceph_dentry_ops = {
.d_revalidate = ceph_d_revalidate,
.d_release = ceph_d_release,
+ .d_prune = ceph_d_prune,
};
const struct dentry_operations ceph_snapdir_dentry_ops = {
const struct dentry_operations ceph_snap_dentry_ops = {
.d_release = ceph_d_release,
+ .d_prune = ceph_d_prune,
};
ceph_snap(inode) == CEPH_NOSNAP &&
(le32_to_cpu(info->cap.caps) & CEPH_CAP_FILE_SHARED) &&
(issued & CEPH_CAP_FILE_EXCL) == 0 &&
- (ci->i_ceph_flags & CEPH_I_COMPLETE) == 0) {
+ !ceph_dir_test_complete(inode)) {
dout(" marking %p complete (empty)\n", inode);
- /* ci->i_ceph_flags |= CEPH_I_COMPLETE; */
+ ceph_dir_set_complete(inode);
ci->i_max_offset = 2;
}
di = ceph_dentry(dn);
spin_lock(&inode->i_lock);
- if ((ceph_inode(inode)->i_ceph_flags & CEPH_I_COMPLETE) == 0) {
+ if (!ceph_dir_test_complete(inode)) {
spin_unlock(&inode->i_lock);
return;
}
* d_move() puts the renamed dentry at the end of
* d_subdirs. We need to assign it an appropriate
* directory offset so we can behave when holding
- * I_COMPLETE.
+ * D_COMPLETE.
*/
ceph_set_dentry_offset(req->r_old_dentry);
dout("dn %p gets new offset %lld\n", req->r_old_dentry,
*/
void ceph_queue_writeback(struct inode *inode)
{
+ ihold(inode);
if (queue_work(ceph_inode_to_client(inode)->wb_wq,
&ceph_inode(inode)->i_wb_work)) {
dout("ceph_queue_writeback %p\n", inode);
- ihold(inode);
} else {
dout("ceph_queue_writeback %p failed\n", inode);
+ iput(inode);
}
}
*/
void ceph_queue_invalidate(struct inode *inode)
{
+ ihold(inode);
if (queue_work(ceph_inode_to_client(inode)->pg_inv_wq,
&ceph_inode(inode)->i_pg_inv_work)) {
dout("ceph_queue_invalidate %p\n", inode);
- ihold(inode);
} else {
dout("ceph_queue_invalidate %p failed\n", inode);
+ iput(inode);
}
}
{
struct ceph_inode_info *ci = ceph_inode(inode);
+ ihold(inode);
if (queue_work(ceph_sb_to_client(inode->i_sb)->trunc_wq,
&ci->i_vmtruncate_work)) {
dout("ceph_queue_vmtruncate %p\n", inode);
- ihold(inode);
} else {
dout("ceph_queue_vmtruncate %p failed, pending=%d\n",
inode, ci->i_truncate_pending);
+ iput(inode);
}
}
*
* Called under mdsc->mutex.
*/
-struct dentry *get_nonsnap_parent(struct dentry *dentry)
+static struct dentry *get_nonsnap_parent(struct dentry *dentry)
{
/*
* we don't need to worry about protecting the d_parent access
}
/*
- * Invalidate dir I_COMPLETE, dentry lease state on an aborted MDS
+ * Invalidate dir D_COMPLETE, dentry lease state on an aborted MDS
* namespace request.
*/
void ceph_invalidate_dir_request(struct ceph_mds_request *req)
struct inode *inode = req->r_locked_dir;
struct ceph_inode_info *ci = ceph_inode(inode);
- dout("invalidate_dir_request %p (I_COMPLETE, lease(s))\n", inode);
+ dout("invalidate_dir_request %p (D_COMPLETE, lease(s))\n", inode);
spin_lock(&inode->i_lock);
- ci->i_ceph_flags &= ~CEPH_I_COMPLETE;
+ ceph_dir_clear_complete(inode);
ci->i_release_count++;
spin_unlock(&inode->i_lock);
/*
* true if all sessions are closed, or we force unmount
*/
-bool done_closing_sessions(struct ceph_mds_client *mdsc)
+static bool done_closing_sessions(struct ceph_mds_client *mdsc)
{
int i, n = 0;
/*
* create a new fs client
*/
-struct ceph_fs_client *create_fs_client(struct ceph_mount_options *fsopt,
+static struct ceph_fs_client *create_fs_client(struct ceph_mount_options *fsopt,
struct ceph_options *opt)
{
struct ceph_fs_client *fsc;
return ERR_PTR(err);
}
-void destroy_fs_client(struct ceph_fs_client *fsc)
+static void destroy_fs_client(struct ceph_fs_client *fsc)
{
dout("destroy_fs_client %p\n", fsc);
if (err == 0) {
dout("open_root_inode success\n");
if (ceph_ino(req->r_target_inode) == CEPH_INO_ROOT &&
- fsc->sb->s_root == NULL)
+ fsc->sb->s_root == NULL) {
root = d_alloc_root(req->r_target_inode);
- else
+ ceph_init_dentry(root);
+ } else {
root = d_obtain_alias(req->r_target_inode);
+ }
req->r_target_inode = NULL;
dout("open_root_inode success, root dentry is %p\n", root);
} else {
* Ceph dentry state
*/
struct ceph_dentry_info {
+ unsigned long flags;
struct ceph_mds_session *lease_session;
u32 lease_gen, lease_shared_gen;
u32 lease_seq;
u64 offset;
};
+/*
+ * dentry flags
+ *
+ * The locking for D_COMPLETE is a bit odd:
+ * - we can clear it at almost any time (see ceph_d_prune)
+ * - it is only meaningful if:
+ * - we hold dir inode i_lock
+ * - we hold dir FILE_SHARED caps
+ * - the dentry D_COMPLETE is set
+ */
+#define CEPH_D_COMPLETE 1 /* if set, d_u.d_subdirs is complete directory */
+
struct ceph_inode_xattrs_info {
/*
* (still encoded) xattr blob. we avoid the overhead of parsing
struct timespec i_rctime;
u64 i_rbytes, i_rfiles, i_rsubdirs;
u64 i_files, i_subdirs;
- u64 i_max_offset; /* largest readdir offset, set with I_COMPLETE */
+ u64 i_max_offset; /* largest readdir offset, set with D_COMPLETE */
struct rb_root i_fragtree;
struct mutex i_fragtree_mutex;
/*
* Ceph inode.
*/
-#define CEPH_I_COMPLETE 1 /* we have complete directory cached */
#define CEPH_I_NODELAY 4 /* do not delay cap release */
#define CEPH_I_FLUSH 8 /* do not delay flush of dirty metadata */
#define CEPH_I_NOFLUSH 16 /* do not flush dirty caps */
return ((loff_t)frag << 32) | (loff_t)off;
}
+/*
+ * set/clear directory D_COMPLETE flag
+ */
+void ceph_dir_set_complete(struct inode *inode);
+void ceph_dir_clear_complete(struct inode *inode);
+bool ceph_dir_test_complete(struct inode *inode);
+
/*
* caps helpers
*/
#include <asm/uaccess.h>
#include <asm/processor.h>
#include <linux/inet.h>
+#include <linux/module.h>
#include <net/ipv6.h>
#include "cifspdu.h"
#include "cifsglob.h"
}
static struct cifsLockInfo *
-cifs_lock_init(__u64 len, __u64 offset, __u8 type, __u16 netfid)
+cifs_lock_init(__u64 offset, __u64 length, __u8 type, __u16 netfid)
{
- struct cifsLockInfo *li =
+ struct cifsLockInfo *lock =
kmalloc(sizeof(struct cifsLockInfo), GFP_KERNEL);
- if (!li)
- return li;
- li->netfid = netfid;
- li->offset = offset;
- li->length = len;
- li->type = type;
- li->pid = current->tgid;
- INIT_LIST_HEAD(&li->blist);
- init_waitqueue_head(&li->block_q);
- return li;
+ if (!lock)
+ return lock;
+ lock->offset = offset;
+ lock->length = length;
+ lock->type = type;
+ lock->netfid = netfid;
+ lock->pid = current->tgid;
+ INIT_LIST_HEAD(&lock->blist);
+ init_waitqueue_head(&lock->block_q);
+ return lock;
}
static void
}
static bool
-cifs_find_lock_conflict(struct cifsInodeInfo *cinode, __u64 offset,
+__cifs_find_lock_conflict(struct cifsInodeInfo *cinode, __u64 offset,
__u64 length, __u8 type, __u16 netfid,
struct cifsLockInfo **conf_lock)
{
return false;
}
+static bool
+cifs_find_lock_conflict(struct cifsInodeInfo *cinode, struct cifsLockInfo *lock,
+ struct cifsLockInfo **conf_lock)
+{
+ return __cifs_find_lock_conflict(cinode, lock->offset, lock->length,
+ lock->type, lock->netfid, conf_lock);
+}
+
static int
cifs_lock_test(struct cifsInodeInfo *cinode, __u64 offset, __u64 length,
__u8 type, __u16 netfid, struct file_lock *flock)
mutex_lock(&cinode->lock_mutex);
- exist = cifs_find_lock_conflict(cinode, offset, length, type, netfid,
- &conf_lock);
+ exist = __cifs_find_lock_conflict(cinode, offset, length, type, netfid,
+ &conf_lock);
if (exist) {
flock->fl_start = conf_lock->offset;
flock->fl_end = conf_lock->offset + conf_lock->length - 1;
return rc;
}
-static int
-cifs_lock_add(struct cifsInodeInfo *cinode, __u64 len, __u64 offset,
- __u8 type, __u16 netfid)
+static void
+cifs_lock_add(struct cifsInodeInfo *cinode, struct cifsLockInfo *lock)
{
- struct cifsLockInfo *li;
-
- li = cifs_lock_init(len, offset, type, netfid);
- if (!li)
- return -ENOMEM;
-
mutex_lock(&cinode->lock_mutex);
- list_add_tail(&li->llist, &cinode->llist);
+ list_add_tail(&lock->llist, &cinode->llist);
mutex_unlock(&cinode->lock_mutex);
- return 0;
}
static int
-cifs_lock_add_if(struct cifsInodeInfo *cinode, __u64 offset, __u64 length,
- __u8 type, __u16 netfid, bool wait)
+cifs_lock_add_if(struct cifsInodeInfo *cinode, struct cifsLockInfo *lock,
+ bool wait)
{
- struct cifsLockInfo *lock, *conf_lock;
+ struct cifsLockInfo *conf_lock;
bool exist;
int rc = 0;
- lock = cifs_lock_init(length, offset, type, netfid);
- if (!lock)
- return -ENOMEM;
-
try_again:
exist = false;
mutex_lock(&cinode->lock_mutex);
- exist = cifs_find_lock_conflict(cinode, offset, length, type, netfid,
- &conf_lock);
+ exist = cifs_find_lock_conflict(cinode, lock, &conf_lock);
if (!exist && cinode->can_cache_brlcks) {
list_add_tail(&lock->llist, &cinode->llist);
mutex_unlock(&cinode->lock_mutex);
(lock->blist.next == &lock->blist));
if (!rc)
goto try_again;
- else {
- mutex_lock(&cinode->lock_mutex);
- list_del_init(&lock->blist);
- }
+ mutex_lock(&cinode->lock_mutex);
+ list_del_init(&lock->blist);
}
- kfree(lock);
mutex_unlock(&cinode->lock_mutex);
return rc;
}
else
type = CIFS_WRLCK;
- lck = cifs_lock_init(length, flock->fl_start, type,
+ lck = cifs_lock_init(flock->fl_start, length, type,
cfile->netfid);
if (!lck) {
rc = -ENOMEM;
if (rc != 0)
cERROR(1, "Error unlocking previously locked "
"range %d during test of lock", rc);
- rc = 0;
- return rc;
+ return 0;
}
if (type & LOCKING_ANDX_SHARED_LOCK) {
flock->fl_type = F_WRLCK;
- rc = 0;
- return rc;
+ return 0;
}
rc = CIFSSMBLock(xid, tcon, netfid, current->tgid, length,
} else
flock->fl_type = F_WRLCK;
- rc = 0;
- return rc;
+ return 0;
}
static void
}
if (lock) {
- rc = cifs_lock_add_if(cinode, flock->fl_start, length,
- type, netfid, wait_flag);
+ struct cifsLockInfo *lock;
+
+ lock = cifs_lock_init(flock->fl_start, length, type, netfid);
+ if (!lock)
+ return -ENOMEM;
+
+ rc = cifs_lock_add_if(cinode, lock, wait_flag);
if (rc < 0)
- return rc;
- else if (!rc)
+ kfree(lock);
+ if (rc <= 0)
goto out;
rc = CIFSSMBLock(xid, tcon, netfid, current->tgid, length,
flock->fl_start, 0, 1, type, wait_flag, 0);
- if (rc == 0) {
- /* For Windows locks we must store them. */
- rc = cifs_lock_add(cinode, length, flock->fl_start,
- type, netfid);
+ if (rc) {
+ kfree(lock);
+ goto out;
}
+
+ cifs_lock_add(cinode, lock);
} else if (unlock)
rc = cifs_unlock_range(cfile, flock, xid);
#include <linux/bit_spinlock.h>
#include <linux/rculist_bl.h>
#include <linux/prefetch.h>
+#include <linux/ratelimit.h>
#include "internal.h"
/*
* would make it unreachable from the root,
* we might still populate it if it was a
* working directory or similar).
+ * We also need to leave mountpoints alone,
+ * directory or not.
*/
- if (dentry->d_count > 1) {
- if (dentry->d_inode && S_ISDIR(dentry->d_inode->i_mode)) {
+ if (dentry->d_count > 1 && dentry->d_inode) {
+ if (S_ISDIR(dentry->d_inode->i_mode) || d_mountpoint(dentry)) {
spin_unlock(&dentry->d_lock);
return -EBUSY;
}
actual = __d_unalias(inode, dentry, alias);
}
write_sequnlock(&rename_lock);
- if (IS_ERR(actual))
+ if (IS_ERR(actual)) {
+ if (PTR_ERR(actual) == -ELOOP)
+ pr_warn_ratelimited(
+ "VFS: Lookup of '%s' in %s %s"
+ " would have caused loop\n",
+ dentry->d_name.name,
+ inode->i_sb->s_type->name,
+ inode->i_sb->s_id);
dput(alias);
+ }
goto out_nolock;
}
}
*/
#include <linux/slab.h>
+#include <linux/module.h>
#include <asm/div64.h>
#include <linux/lcm.h>
#include <linux/parser.h>
#include <linux/vfs.h>
#include <linux/random.h>
+#include <linux/module.h>
#include <linux/exportfs.h>
#include <linux/slab.h>
* start pushing delalloc when 1/2 of free blocks are dirty.
*/
if (free_blocks < 2 * dirty_blocks)
- writeback_inodes_sb_if_idle(sb);
+ writeback_inodes_sb_if_idle(sb, WB_REASON_FS_FREE_SPACE);
return 0;
}
unsigned int for_kupdate:1;
unsigned int range_cyclic:1;
unsigned int for_background:1;
+ enum wb_reason reason; /* why was writeback initiated? */
struct list_head list; /* pending work list */
struct completion *done; /* set if the caller waits */
};
+const char *wb_reason_name[] = {
+ [WB_REASON_BACKGROUND] = "background",
+ [WB_REASON_TRY_TO_FREE_PAGES] = "try_to_free_pages",
+ [WB_REASON_SYNC] = "sync",
+ [WB_REASON_PERIODIC] = "periodic",
+ [WB_REASON_LAPTOP_TIMER] = "laptop_timer",
+ [WB_REASON_FREE_MORE_MEM] = "free_more_memory",
+ [WB_REASON_FS_FREE_SPACE] = "fs_free_space",
+ [WB_REASON_FORKER_THREAD] = "forker_thread"
+};
+
/*
* Include the creation of the trace points after defining the
* wb_writeback_work structure so that the definition remains local to this
static void
__bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages,
- bool range_cyclic)
+ bool range_cyclic, enum wb_reason reason)
{
struct wb_writeback_work *work;
work->sync_mode = WB_SYNC_NONE;
work->nr_pages = nr_pages;
work->range_cyclic = range_cyclic;
+ work->reason = reason;
bdi_queue_work(bdi, work);
}
* completion. Caller need not hold sb s_umount semaphore.
*
*/
-void bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages)
+void bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages,
+ enum wb_reason reason)
{
- __bdi_start_writeback(bdi, nr_pages, true);
+ __bdi_start_writeback(bdi, nr_pages, true, reason);
}
/**
*/
static int move_expired_inodes(struct list_head *delaying_queue,
struct list_head *dispatch_queue,
- unsigned long *older_than_this)
+ struct wb_writeback_work *work)
{
LIST_HEAD(tmp);
struct list_head *pos, *node;
while (!list_empty(delaying_queue)) {
inode = wb_inode(delaying_queue->prev);
- if (older_than_this &&
- inode_dirtied_after(inode, *older_than_this))
+ if (work->older_than_this &&
+ inode_dirtied_after(inode, *work->older_than_this))
break;
if (sb && sb != inode->i_sb)
do_sb_sort = 1;
* |
* +--> dequeue for IO
*/
-static void queue_io(struct bdi_writeback *wb, unsigned long *older_than_this)
+static void queue_io(struct bdi_writeback *wb, struct wb_writeback_work *work)
{
int moved;
assert_spin_locked(&wb->list_lock);
list_splice_init(&wb->b_more_io, &wb->b_io);
- moved = move_expired_inodes(&wb->b_dirty, &wb->b_io, older_than_this);
- trace_writeback_queue_io(wb, older_than_this, moved);
+ moved = move_expired_inodes(&wb->b_dirty, &wb->b_io, work);
+ trace_writeback_queue_io(wb, work, moved);
}
static int write_inode(struct inode *inode, struct writeback_control *wbc)
return wrote;
}
-long writeback_inodes_wb(struct bdi_writeback *wb, long nr_pages)
+long writeback_inodes_wb(struct bdi_writeback *wb, long nr_pages,
+ enum wb_reason reason)
{
struct wb_writeback_work work = {
.nr_pages = nr_pages,
.sync_mode = WB_SYNC_NONE,
.range_cyclic = 1,
+ .reason = reason,
};
spin_lock(&wb->list_lock);
if (list_empty(&wb->b_io))
- queue_io(wb, NULL);
+ queue_io(wb, &work);
__writeback_inodes_wb(wb, &work);
spin_unlock(&wb->list_lock);
return nr_pages - work.nr_pages;
}
-static inline bool over_bground_thresh(void)
+static bool over_bground_thresh(struct backing_dev_info *bdi)
{
unsigned long background_thresh, dirty_thresh;
global_dirty_limits(&background_thresh, &dirty_thresh);
- return (global_page_state(NR_FILE_DIRTY) +
- global_page_state(NR_UNSTABLE_NFS) > background_thresh);
+ if (global_page_state(NR_FILE_DIRTY) +
+ global_page_state(NR_UNSTABLE_NFS) > background_thresh)
+ return true;
+
+ if (bdi_stat(bdi, BDI_RECLAIMABLE) >
+ bdi_dirty_limit(bdi, background_thresh))
+ return true;
+
+ return false;
}
/*
static void wb_update_bandwidth(struct bdi_writeback *wb,
unsigned long start_time)
{
- __bdi_update_bandwidth(wb->bdi, 0, 0, 0, 0, start_time);
+ __bdi_update_bandwidth(wb->bdi, 0, 0, 0, 0, 0, start_time);
}
/*
* For background writeout, stop when we are below the
* background dirty threshold
*/
- if (work->for_background && !over_bground_thresh())
+ if (work->for_background && !over_bground_thresh(wb->bdi))
break;
if (work->for_kupdate) {
trace_writeback_start(wb->bdi, work);
if (list_empty(&wb->b_io))
- queue_io(wb, work->older_than_this);
+ queue_io(wb, work);
if (work->sb)
progress = writeback_sb_inodes(work->sb, wb, work);
else
static long wb_check_background_flush(struct bdi_writeback *wb)
{
- if (over_bground_thresh()) {
+ if (over_bground_thresh(wb->bdi)) {
struct wb_writeback_work work = {
.nr_pages = LONG_MAX,
.sync_mode = WB_SYNC_NONE,
.for_background = 1,
.range_cyclic = 1,
+ .reason = WB_REASON_BACKGROUND,
};
return wb_writeback(wb, &work);
.sync_mode = WB_SYNC_NONE,
.for_kupdate = 1,
.range_cyclic = 1,
+ .reason = WB_REASON_PERIODIC,
};
return wb_writeback(wb, &work);
* Start writeback of `nr_pages' pages. If `nr_pages' is zero, write back
* the whole world.
*/
-void wakeup_flusher_threads(long nr_pages)
+void wakeup_flusher_threads(long nr_pages, enum wb_reason reason)
{
struct backing_dev_info *bdi;
list_for_each_entry_rcu(bdi, &bdi_list, bdi_list) {
if (!bdi_has_dirty_io(bdi))
continue;
- __bdi_start_writeback(bdi, nr_pages, false);
+ __bdi_start_writeback(bdi, nr_pages, false, reason);
}
rcu_read_unlock();
}
* on how many (if any) will be written, and this function does not wait
* for IO completion of submitted IO.
*/
-void writeback_inodes_sb_nr(struct super_block *sb, unsigned long nr)
+void writeback_inodes_sb_nr(struct super_block *sb,
+ unsigned long nr,
+ enum wb_reason reason)
{
DECLARE_COMPLETION_ONSTACK(done);
struct wb_writeback_work work = {
.tagged_writepages = 1,
.done = &done,
.nr_pages = nr,
+ .reason = reason,
};
WARN_ON(!rwsem_is_locked(&sb->s_umount));
* on how many (if any) will be written, and this function does not wait
* for IO completion of submitted IO.
*/
-void writeback_inodes_sb(struct super_block *sb)
+void writeback_inodes_sb(struct super_block *sb, enum wb_reason reason)
{
- return writeback_inodes_sb_nr(sb, get_nr_dirty_pages());
+ return writeback_inodes_sb_nr(sb, get_nr_dirty_pages(), reason);
}
EXPORT_SYMBOL(writeback_inodes_sb);
* Invoke writeback_inodes_sb if no writeback is currently underway.
* Returns 1 if writeback was started, 0 if not.
*/
-int writeback_inodes_sb_if_idle(struct super_block *sb)
+int writeback_inodes_sb_if_idle(struct super_block *sb, enum wb_reason reason)
{
if (!writeback_in_progress(sb->s_bdi)) {
down_read(&sb->s_umount);
- writeback_inodes_sb(sb);
+ writeback_inodes_sb(sb, reason);
up_read(&sb->s_umount);
return 1;
} else
* Returns 1 if writeback was started, 0 if not.
*/
int writeback_inodes_sb_nr_if_idle(struct super_block *sb,
- unsigned long nr)
+ unsigned long nr,
+ enum wb_reason reason)
{
if (!writeback_in_progress(sb->s_bdi)) {
down_read(&sb->s_umount);
- writeback_inodes_sb_nr(sb, nr);
+ writeback_inodes_sb_nr(sb, nr, reason);
up_read(&sb->s_umount);
return 1;
} else
.nr_pages = LONG_MAX,
.range_cyclic = 0,
.done = &done,
+ .reason = WB_REASON_SYNC,
};
WARN_ON(!rwsem_is_locked(&sb->s_umount));
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/stat.h>
+#include <linux/module.h>
#include "fuse_i.h"
#include <linux/buffer_head.h>
#include <linux/blkdev.h>
#include <linux/kthread.h>
+#include <linux/export.h>
#include <linux/namei.h>
#include <linux/mount.h>
#include <linux/gfs2_ondisk.h>
src = in->name;
srclen = in->len;
+ if (srclen > HFS_NAMELEN)
+ srclen = HFS_NAMELEN;
dst = out;
dstlen = HFS_MAX_NAMELEN;
if (nls_io) {
*/
#include <linux/gfp.h>
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/ioprio.h>
#include <linux/blkdev.h>
#include <linux/capability.h>
return 0;
}
+/*
+ * jffs2_selected_compress:
+ * @compr: Explicit compression type to use (ie, JFFS2_COMPR_ZLIB).
+ * If 0, just take the first available compression mode.
+ * @data_in: Pointer to uncompressed data
+ * @cpage_out: Pointer to returned pointer to buffer for compressed data
+ * @datalen: On entry, holds the amount of data available for compression.
+ * On exit, expected to hold the amount of data actually compressed.
+ * @cdatalen: On entry, holds the amount of space available for compressed
+ * data. On exit, expected to hold the actual size of the compressed
+ * data.
+ *
+ * Returns: the compression type used. Zero is used to show that the data
+ * could not be compressed; probably because we couldn't find the requested
+ * compression mode.
+ */
+static int jffs2_selected_compress(u8 compr, unsigned char *data_in,
+ unsigned char **cpage_out, u32 *datalen, u32 *cdatalen)
+{
+ struct jffs2_compressor *this;
+ int err, ret = JFFS2_COMPR_NONE;
+ uint32_t orig_slen, orig_dlen;
+ char *output_buf;
+
+ output_buf = kmalloc(*cdatalen, GFP_KERNEL);
+ if (!output_buf) {
+ printk(KERN_WARNING "JFFS2: No memory for compressor allocation. Compression failed.\n");
+ return ret;
+ }
+ orig_slen = *datalen;
+ orig_dlen = *cdatalen;
+ spin_lock(&jffs2_compressor_list_lock);
+ list_for_each_entry(this, &jffs2_compressor_list, list) {
+ /* Skip decompress-only and disabled modules */
+ if (!this->compress || this->disabled)
+ continue;
+
+ /* Skip if not the desired compression type */
+ if (compr && (compr != this->compr))
+ continue;
+
+ /*
+ * Either compression type was unspecified, or we found our
+ * compressor; either way, we're good to go.
+ */
+ this->usecount++;
+ spin_unlock(&jffs2_compressor_list_lock);
+
+ *datalen = orig_slen;
+ *cdatalen = orig_dlen;
+ err = this->compress(data_in, output_buf, datalen, cdatalen);
+
+ spin_lock(&jffs2_compressor_list_lock);
+ this->usecount--;
+ if (!err) {
+ /* Success */
+ ret = this->compr;
+ this->stat_compr_blocks++;
+ this->stat_compr_orig_size += *datalen;
+ this->stat_compr_new_size += *cdatalen;
+ break;
+ }
+ }
+ spin_unlock(&jffs2_compressor_list_lock);
+ if (ret == JFFS2_COMPR_NONE)
+ kfree(output_buf);
+ else
+ *cpage_out = output_buf;
+
+ return ret;
+}
+
/* jffs2_compress:
* @data_in: Pointer to uncompressed data
* @cpage_out: Pointer to returned pointer to buffer for compressed data
uint32_t *datalen, uint32_t *cdatalen)
{
int ret = JFFS2_COMPR_NONE;
- int compr_ret;
+ int mode, compr_ret;
struct jffs2_compressor *this, *best=NULL;
unsigned char *output_buf = NULL, *tmp_buf;
uint32_t orig_slen, orig_dlen;
uint32_t best_slen=0, best_dlen=0;
- switch (jffs2_compression_mode) {
+ if (c->mount_opts.override_compr)
+ mode = c->mount_opts.compr;
+ else
+ mode = jffs2_compression_mode;
+
+ switch (mode) {
case JFFS2_COMPR_MODE_NONE:
break;
case JFFS2_COMPR_MODE_PRIORITY:
- output_buf = kmalloc(*cdatalen,GFP_KERNEL);
- if (!output_buf) {
- printk(KERN_WARNING "JFFS2: No memory for compressor allocation. Compression failed.\n");
- goto out;
- }
- orig_slen = *datalen;
- orig_dlen = *cdatalen;
- spin_lock(&jffs2_compressor_list_lock);
- list_for_each_entry(this, &jffs2_compressor_list, list) {
- /* Skip decompress-only backwards-compatibility and disabled modules */
- if ((!this->compress)||(this->disabled))
- continue;
-
- this->usecount++;
- spin_unlock(&jffs2_compressor_list_lock);
- *datalen = orig_slen;
- *cdatalen = orig_dlen;
- compr_ret = this->compress(data_in, output_buf, datalen, cdatalen);
- spin_lock(&jffs2_compressor_list_lock);
- this->usecount--;
- if (!compr_ret) {
- ret = this->compr;
- this->stat_compr_blocks++;
- this->stat_compr_orig_size += *datalen;
- this->stat_compr_new_size += *cdatalen;
- break;
- }
- }
- spin_unlock(&jffs2_compressor_list_lock);
- if (ret == JFFS2_COMPR_NONE)
- kfree(output_buf);
+ ret = jffs2_selected_compress(0, data_in, cpage_out, datalen,
+ cdatalen);
break;
case JFFS2_COMPR_MODE_SIZE:
case JFFS2_COMPR_MODE_FAVOURLZO:
best->stat_compr_orig_size += best_slen;
best->stat_compr_new_size += best_dlen;
ret = best->compr;
+ *cpage_out = output_buf;
}
spin_unlock(&jffs2_compressor_list_lock);
break;
+ case JFFS2_COMPR_MODE_FORCELZO:
+ ret = jffs2_selected_compress(JFFS2_COMPR_LZO, data_in,
+ cpage_out, datalen, cdatalen);
+ break;
+ case JFFS2_COMPR_MODE_FORCEZLIB:
+ ret = jffs2_selected_compress(JFFS2_COMPR_ZLIB, data_in,
+ cpage_out, datalen, cdatalen);
+ break;
default:
printk(KERN_ERR "JFFS2: unknown compression mode.\n");
}
- out:
+
if (ret == JFFS2_COMPR_NONE) {
*cpage_out = data_in;
*datalen = *cdatalen;
none_stat_compr_blocks++;
none_stat_compr_size += *datalen;
}
- else {
- *cpage_out = output_buf;
- }
return ret;
}
#define JFFS2_COMPR_MODE_PRIORITY 1
#define JFFS2_COMPR_MODE_SIZE 2
#define JFFS2_COMPR_MODE_FAVOURLZO 3
+#define JFFS2_COMPR_MODE_FORCELZO 4
+#define JFFS2_COMPR_MODE_FORCEZLIB 5
#define FAVOUR_LZO_PERCENT 80
jffs2_do_setattr(inode, &iattr);
}
-int jffs2_remount_fs (struct super_block *sb, int *flags, char *data)
+int jffs2_do_remount_fs(struct super_block *sb, int *flags, char *data)
{
struct jffs2_sb_info *c = JFFS2_SB_INFO(sb);
struct jffs2_inodirty;
+struct jffs2_mount_opts {
+ bool override_compr;
+ unsigned int compr;
+};
+
/* A struct for the overall file system control. Pointers to
jffs2_sb_info structs are named `c' in the source code.
Nee jffs_control
#endif
struct jffs2_summary *summary; /* Summary information */
+ struct jffs2_mount_opts mount_opts;
#ifdef CONFIG_JFFS2_FS_XATTR
#define XATTRINDEX_HASHSIZE (57)
struct inode *jffs2_new_inode (struct inode *dir_i, umode_t mode,
struct jffs2_raw_inode *ri);
int jffs2_statfs (struct dentry *, struct kstatfs *);
-int jffs2_remount_fs (struct super_block *, int *, char *);
+int jffs2_do_remount_fs(struct super_block *, int *, char *);
int jffs2_do_fill_super(struct super_block *sb, void *data, int silent);
void jffs2_gc_release_inode(struct jffs2_sb_info *c,
struct jffs2_inode_info *f);
else
c->mtd->unpoint(c->mtd, 0, c->mtd->size);
#endif
- if (s)
- kfree(s);
-
+ kfree(s);
return ret;
}
#include <linux/fs.h>
#include <linux/err.h>
#include <linux/mount.h>
+#include <linux/parser.h>
#include <linux/jffs2.h>
#include <linux/pagemap.h>
#include <linux/mtd/super.h>
#include <linux/ctype.h>
#include <linux/namei.h>
+#include <linux/seq_file.h>
#include <linux/exportfs.h>
#include "compr.h"
#include "nodelist.h"
unlock_super(sb);
}
+static const char *jffs2_compr_name(unsigned int compr)
+{
+ switch (compr) {
+ case JFFS2_COMPR_MODE_NONE:
+ return "none";
+#ifdef CONFIG_JFFS2_LZO
+ case JFFS2_COMPR_MODE_FORCELZO:
+ return "lzo";
+#endif
+#ifdef CONFIG_JFFS2_ZLIB
+ case JFFS2_COMPR_MODE_FORCEZLIB:
+ return "zlib";
+#endif
+ default:
+ /* should never happen; programmer error */
+ WARN_ON(1);
+ return "";
+ }
+}
+
+static int jffs2_show_options(struct seq_file *s, struct vfsmount *mnt)
+{
+ struct jffs2_sb_info *c = JFFS2_SB_INFO(mnt->mnt_sb);
+ struct jffs2_mount_opts *opts = &c->mount_opts;
+
+ if (opts->override_compr)
+ seq_printf(s, ",compr=%s", jffs2_compr_name(opts->compr));
+
+ return 0;
+}
+
static int jffs2_sync_fs(struct super_block *sb, int wait)
{
struct jffs2_sb_info *c = JFFS2_SB_INFO(sb);
.fh_to_parent = jffs2_fh_to_parent,
};
+/*
+ * JFFS2 mount options.
+ *
+ * Opt_override_compr: override default compressor
+ * Opt_err: just end of array marker
+ */
+enum {
+ Opt_override_compr,
+ Opt_err,
+};
+
+static const match_table_t tokens = {
+ {Opt_override_compr, "compr=%s"},
+ {Opt_err, NULL},
+};
+
+static int jffs2_parse_options(struct jffs2_sb_info *c, char *data)
+{
+ substring_t args[MAX_OPT_ARGS];
+ char *p, *name;
+
+ if (!data)
+ return 0;
+
+ while ((p = strsep(&data, ","))) {
+ int token;
+
+ if (!*p)
+ continue;
+
+ token = match_token(p, tokens, args);
+ switch (token) {
+ case Opt_override_compr:
+ name = match_strdup(&args[0]);
+
+ if (!name)
+ return -ENOMEM;
+ if (!strcmp(name, "none"))
+ c->mount_opts.compr = JFFS2_COMPR_MODE_NONE;
+#ifdef CONFIG_JFFS2_LZO
+ else if (!strcmp(name, "lzo"))
+ c->mount_opts.compr = JFFS2_COMPR_MODE_FORCELZO;
+#endif
+#ifdef CONFIG_JFFS2_ZLIB
+ else if (!strcmp(name, "zlib"))
+ c->mount_opts.compr =
+ JFFS2_COMPR_MODE_FORCEZLIB;
+#endif
+ else {
+ printk(KERN_ERR "JFFS2 Error: unknown compressor \"%s\"",
+ name);
+ kfree(name);
+ return -EINVAL;
+ }
+ kfree(name);
+ c->mount_opts.override_compr = true;
+ break;
+ default:
+ printk(KERN_ERR "JFFS2 Error: unrecognized mount option '%s' or missing value\n",
+ p);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static int jffs2_remount_fs(struct super_block *sb, int *flags, char *data)
+{
+ struct jffs2_sb_info *c = JFFS2_SB_INFO(sb);
+ int err;
+
+ err = jffs2_parse_options(c, data);
+ if (err)
+ return -EINVAL;
+
+ return jffs2_do_remount_fs(sb, flags, data);
+}
+
static const struct super_operations jffs2_super_operations =
{
.alloc_inode = jffs2_alloc_inode,
.remount_fs = jffs2_remount_fs,
.evict_inode = jffs2_evict_inode,
.dirty_inode = jffs2_dirty_inode,
+ .show_options = jffs2_show_options,
.sync_fs = jffs2_sync_fs,
};
c->os_priv = sb;
sb->s_fs_info = c;
+ ret = jffs2_parse_options(c, data);
+ if (ret) {
+ kfree(c);
+ return -EINVAL;
+ }
+
/* Initialize JFFS2 superblock locks, the further initialization will
* be done later */
mutex_init(&c->alloc_sem);
if (!jffs2_is_writebuffered(c))
return 0;
- if (mutex_trylock(&c->alloc_sem)) {
- mutex_unlock(&c->alloc_sem);
+ if (!mutex_is_locked(&c->alloc_sem)) {
printk(KERN_CRIT "jffs2_flush_wbuf() called with alloc_sem not locked!\n");
BUG();
}
int cmlen = min_t(int, c->oobavail, OOB_CM_SIZE);
struct mtd_oob_ops ops;
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.ooblen = NR_OOB_SCAN_PAGES * c->oobavail;
ops.oobbuf = c->oobbuf;
ops.len = ops.ooboffs = ops.retlen = ops.oobretlen = 0;
struct mtd_oob_ops ops;
int ret, cmlen = min_t(int, c->oobavail, OOB_CM_SIZE);
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.ooblen = cmlen;
ops.oobbuf = c->oobbuf;
ops.len = ops.ooboffs = ops.retlen = ops.oobretlen = 0;
struct mtd_oob_ops ops;
int cmlen = min_t(int, c->oobavail, OOB_CM_SIZE);
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.ooblen = cmlen;
ops.oobbuf = (uint8_t *)&oob_cleanmarker;
ops.len = ops.ooboffs = ops.retlen = ops.oobretlen = 0;
#include <linux/buffer_head.h> /* for sync_blockdev() */
#include <linux/bio.h>
#include <linux/freezer.h>
+#include <linux/export.h>
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/seq_file.h>
#include <linux/bio.h>
#include <linux/slab.h>
#include <linux/blkdev.h>
+#include <linux/module.h>
#include <linux/mtd/mtd.h>
#include <linux/statfs.h>
#include <linux/buffer_head.h>
#include <linux/bitops.h>
#include <linux/sched.h>
-static const int nibblemap[] = { 4,3,3,2,3,2,2,1,3,2,2,1,2,1,1,0 };
-
static DEFINE_SPINLOCK(bitmap_lock);
-static unsigned long count_free(struct buffer_head *map[], unsigned numblocks, __u32 numbits)
+/*
+ * bitmap consists of blocks filled with 16bit words
+ * bit set == busy, bit clear == free
+ * endianness is a mess, but for counting zero bits it really doesn't matter...
+ */
+static __u32 count_free(struct buffer_head *map[], unsigned blocksize, __u32 numbits)
{
- unsigned i, j, sum = 0;
- struct buffer_head *bh;
-
- for (i=0; i<numblocks-1; i++) {
- if (!(bh=map[i]))
- return(0);
- for (j=0; j<bh->b_size; j++)
- sum += nibblemap[bh->b_data[j] & 0xf]
- + nibblemap[(bh->b_data[j]>>4) & 0xf];
- }
+ __u32 sum = 0;
+ unsigned blocks = DIV_ROUND_UP(numbits, blocksize * 8);
- if (numblocks==0 || !(bh=map[numblocks-1]))
- return(0);
- i = ((numbits - (numblocks-1) * bh->b_size * 8) / 16) * 2;
- for (j=0; j<i; j++) {
- sum += nibblemap[bh->b_data[j] & 0xf]
- + nibblemap[(bh->b_data[j]>>4) & 0xf];
+ while (blocks--) {
+ unsigned words = blocksize / 2;
+ __u16 *p = (__u16 *)(*map++)->b_data;
+ while (words--)
+ sum += 16 - hweight16(*p++);
}
- i = numbits%16;
- if (i!=0) {
- i = *(__u16 *)(&bh->b_data[j]) | ~((1<<i) - 1);
- sum += nibblemap[i & 0xf] + nibblemap[(i>>4) & 0xf];
- sum += nibblemap[(i>>8) & 0xf] + nibblemap[(i>>12) & 0xf];
- }
- return(sum);
+ return sum;
}
void minix_free_block(struct inode *inode, unsigned long block)
return 0;
}
-unsigned long minix_count_free_blocks(struct minix_sb_info *sbi)
+unsigned long minix_count_free_blocks(struct super_block *sb)
{
- return (count_free(sbi->s_zmap, sbi->s_zmap_blocks,
- sbi->s_nzones - sbi->s_firstdatazone + 1)
+ struct minix_sb_info *sbi = minix_sb(sb);
+ u32 bits = sbi->s_nzones - (sbi->s_firstdatazone + 1);
+
+ return (count_free(sbi->s_zmap, sb->s_blocksize, bits)
<< sbi->s_log_zone_size);
}
return inode;
}
-unsigned long minix_count_free_inodes(struct minix_sb_info *sbi)
+unsigned long minix_count_free_inodes(struct super_block *sb)
{
- return count_free(sbi->s_imap, sbi->s_imap_blocks, sbi->s_ninodes + 1);
+ struct minix_sb_info *sbi = minix_sb(sb);
+ u32 bits = sbi->s_ninodes + 1;
+
+ return count_free(sbi->s_imap, sb->s_blocksize, bits);
}
else if (sbi->s_mount_state & MINIX_ERROR_FS)
printk("MINIX-fs: mounting file system with errors, "
"running fsck is recommended\n");
+
+ /* Apparently minix can create filesystems that allocate more blocks for
+ * the bitmaps than needed. We simply ignore that, but verify it didn't
+ * create one with not enough blocks and bail out if so.
+ */
+ block = minix_blocks_needed(sbi->s_ninodes, s->s_blocksize);
+ if (sbi->s_imap_blocks < block) {
+ printk("MINIX-fs: file system does not have enough "
+ "imap blocks allocated. Refusing to mount\n");
+ goto out_iput;
+ }
+
+ block = minix_blocks_needed(
+ (sbi->s_nzones - (sbi->s_firstdatazone + 1)),
+ s->s_blocksize);
+ if (sbi->s_zmap_blocks < block) {
+ printk("MINIX-fs: file system does not have enough "
+ "zmap blocks allocated. Refusing to mount.\n");
+ goto out_iput;
+ }
+
return 0;
out_iput:
buf->f_type = sb->s_magic;
buf->f_bsize = sb->s_blocksize;
buf->f_blocks = (sbi->s_nzones - sbi->s_firstdatazone) << sbi->s_log_zone_size;
- buf->f_bfree = minix_count_free_blocks(sbi);
+ buf->f_bfree = minix_count_free_blocks(sb);
buf->f_bavail = buf->f_bfree;
buf->f_files = sbi->s_ninodes;
- buf->f_ffree = minix_count_free_inodes(sbi);
+ buf->f_ffree = minix_count_free_inodes(sb);
buf->f_namelen = sbi->s_namelen;
buf->f_fsid.val[0] = (u32)id;
buf->f_fsid.val[1] = (u32)(id >> 32);
extern struct minix2_inode * minix_V2_raw_inode(struct super_block *, ino_t, struct buffer_head **);
extern struct inode * minix_new_inode(const struct inode *, int, int *);
extern void minix_free_inode(struct inode * inode);
-extern unsigned long minix_count_free_inodes(struct minix_sb_info *sbi);
+extern unsigned long minix_count_free_inodes(struct super_block *sb);
extern int minix_new_block(struct inode * inode);
extern void minix_free_block(struct inode *inode, unsigned long block);
-extern unsigned long minix_count_free_blocks(struct minix_sb_info *sbi);
+extern unsigned long minix_count_free_blocks(struct super_block *sb);
extern int minix_getattr(struct vfsmount *, struct dentry *, struct kstat *);
extern int minix_prepare_chunk(struct page *page, loff_t pos, unsigned len);
return list_entry(inode, struct minix_inode_info, vfs_inode);
}
+static inline unsigned minix_blocks_needed(unsigned bits, unsigned blocksize)
+{
+ return DIV_ROUND_UP(bits, blocksize * 8);
+}
+
#if defined(CONFIG_MINIX_FS_NATIVE_ENDIAN) && \
defined(CONFIG_MINIX_FS_BIG_ENDIAN_16BIT_INDEXED)
if (!size)
return 0;
- size = (size >> 4) + ((size & 15) > 0);
+ size >>= 4;
while (*p++ == 0xffff) {
if (--size == 0)
return (p - addr) << 4;
mntput(path->mnt);
if (ret == -EISDIR)
ret = 0;
- return ret;
+ return ret < 0 ? ret : need_mntput;
}
int follow_down_one(struct path *path)
break;
path->mnt = mounted;
path->dentry = mounted->mnt_root;
+ nd->flags |= LOOKUP_JUMPED;
nd->seq = read_seqcount_begin(&path->dentry->d_seq);
/*
* Update the inode too. We don't need to re-check the
path_put_conditional(path, nd);
return err;
}
+ if (err)
+ nd->flags |= LOOKUP_JUMPED;
*inode = path->dentry->d_inode;
return 0;
}
}
/* create side of things */
+ /*
+ * This will *only* deal with leaving RCU mode - LOOKUP_JUMPED has been
+ * cleared when we got to the last component we are about to look up
+ */
error = complete_walk(nd);
if (error)
return ERR_PTR(error);
if (error < 0)
goto exit_dput;
+ if (error)
+ nd->flags |= LOOKUP_JUMPED;
+
error = -ENOENT;
if (!path->dentry->d_inode)
goto exit_dput;
path_to_nameidata(path, nd);
nd->inode = path->dentry->d_inode;
+ /* Why this, you ask? _Now_ we might have grown LOOKUP_JUMPED... */
+ error = complete_walk(nd);
+ if (error)
+ goto exit;
error = -EISDIR;
if (S_ISDIR(nd->inode->i_mode))
goto exit;
__mnt_make_longterm(mnt);
new_ns->root = mnt;
list_add(&new_ns->list, &new_ns->root->mnt_list);
+ } else {
+ mntput(mnt);
}
return new_ns;
}
EXPORT_SYMBOL(create_mnt_ns);
+struct dentry *mount_subtree(struct vfsmount *mnt, const char *name)
+{
+ struct mnt_namespace *ns;
+ struct path path;
+ int err;
+
+ ns = create_mnt_ns(mnt);
+ if (IS_ERR(ns))
+ return ERR_CAST(ns);
+
+ err = vfs_path_lookup(mnt->mnt_root, mnt,
+ name, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, &path);
+
+ put_mnt_ns(ns);
+
+ if (err)
+ return ERR_PTR(err);
+
+ /* trade a vfsmount reference for active sb one */
+ atomic_inc(&path.mnt->mnt_sb->s_active);
+ mntput(path.mnt);
+ /* lock the sucker */
+ down_write(&path.mnt->mnt_sb->s_umount);
+ /* ... and return the root of (sub)tree on it */
+ return path.dentry;
+}
+EXPORT_SYMBOL(mount_subtree);
+
SYSCALL_DEFINE5(mount, char __user *, dev_name, char __user *, dir_name,
char __user *, type, unsigned long, flags, void __user *, data)
{
#include <linux/nfs_fs.h>
#include <linux/nfs_page.h>
+#include <linux/module.h>
#include "internal.h"
#include "nfs4filelayout.h"
#include <linux/nfs_page.h>
#include <linux/nfs_fs.h>
#include <linux/nfs_mount.h>
+#include <linux/export.h>
#include "internal.h"
#include "pnfs.h"
#include <linux/nfs_fs.h>
#include <linux/nfs_page.h>
+#include <linux/module.h>
#include "internal.h"
#include "pnfs.h"
#include "iostat.h"
* such damages.
*/
+#include <linux/export.h>
#include "pnfs.h"
#define NFSDBG_FACILITY NFSDBG_PNFS
static struct dentry *nfs_follow_remote_path(struct vfsmount *root_mnt,
const char *export_path)
{
- struct mnt_namespace *ns_private;
- struct super_block *s;
struct dentry *dentry;
- struct path path;
- int ret;
-
- ns_private = create_mnt_ns(root_mnt);
- ret = PTR_ERR(ns_private);
- if (IS_ERR(ns_private))
- goto out_mntput;
-
- ret = nfs_referral_loop_protect();
- if (ret != 0)
- goto out_put_mnt_ns;
+ int ret = nfs_referral_loop_protect();
- ret = vfs_path_lookup(root_mnt->mnt_root, root_mnt,
- export_path, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, &path);
+ if (ret) {
+ mntput(root_mnt);
+ return ERR_PTR(ret);
+ }
+ dentry = mount_subtree(root_mnt, export_path);
nfs_referral_loop_unprotect();
- put_mnt_ns(ns_private);
-
- if (ret != 0)
- goto out_err;
-
- s = path.mnt->mnt_sb;
- atomic_inc(&s->s_active);
- dentry = dget(path.dentry);
- path_put(&path);
- down_write(&s->s_umount);
return dentry;
-out_put_mnt_ns:
- put_mnt_ns(ns_private);
-out_mntput:
- mntput(root_mnt);
-out_err:
- return ERR_PTR(ret);
}
static struct dentry *nfs4_try_mount(int flags, const char *dev_name,
#include <linux/nfs_mount.h>
#include <linux/nfs_page.h>
#include <linux/backing-dev.h>
+#include <linux/export.h>
#include <asm/uaccess.h>
#include <linux/slab.h>
#include <linux/nfs_fs.h>
+#include <linux/export.h>
#include "acl.h"
#include <linux/sunrpc/clnt.h>
#include <linux/sunrpc/gss_api.h>
#include <linux/sunrpc/gss_krb5_enctypes.h>
+#include <linux/module.h>
#include "idmap.h"
#include "nfsd.h"
#include <linux/sched.h>
#include <linux/freezer.h>
+#include <linux/module.h>
#include <linux/fs_struct.h>
#include <linux/swap.h>
#include <linux/idr.h>
#include <linux/kref.h>
#include <linux/net.h>
+#include <linux/export.h>
#include <net/tcp.h>
#include <asm/uaccess.h>
#include <linux/sysctl.h>
#include <linux/spinlock.h>
#include <linux/debugfs.h>
+#include <linux/export.h>
#include "cluster/heartbeat.h"
#include "cluster/nodemanager.h"
return error;
}
-static int proc_pid_fd_link_getattr(struct vfsmount *mnt, struct dentry *dentry,
- struct kstat *stat)
-{
- struct inode *inode = dentry->d_inode;
- struct task_struct *task = get_proc_task(inode);
- int rc;
-
- if (task == NULL)
- return -ESRCH;
-
- rc = -EACCES;
- if (lock_trace(task))
- goto out_task;
-
- generic_fillattr(inode, stat);
- unlock_trace(task);
- rc = 0;
-out_task:
- put_task_struct(task);
- return rc;
-}
-
static const struct inode_operations proc_pid_link_inode_operations = {
.readlink = proc_pid_readlink,
.follow_link = proc_pid_follow_link,
.setattr = proc_setattr,
};
-static const struct inode_operations proc_fdinfo_link_inode_operations = {
- .setattr = proc_setattr,
- .getattr = proc_pid_fd_link_getattr,
-};
-
-static const struct inode_operations proc_fd_link_inode_operations = {
- .readlink = proc_pid_readlink,
- .follow_link = proc_pid_follow_link,
- .setattr = proc_setattr,
- .getattr = proc_pid_fd_link_getattr,
-};
-
/* building an inode */
static int proc_fd_info(struct inode *inode, struct path *path, char *info)
{
- struct task_struct *task;
- struct files_struct *files;
+ struct task_struct *task = get_proc_task(inode);
+ struct files_struct *files = NULL;
struct file *file;
int fd = proc_fd(inode);
- int rc;
-
- task = get_proc_task(inode);
- if (!task)
- return -ENOENT;
-
- rc = -EACCES;
- if (lock_trace(task))
- goto out_task;
-
- rc = -ENOENT;
- files = get_files_struct(task);
- if (files == NULL)
- goto out_unlock;
- /*
- * We are not taking a ref to the file structure, so we must
- * hold ->file_lock.
- */
- spin_lock(&files->file_lock);
- file = fcheck_files(files, fd);
- if (file) {
- unsigned int f_flags;
- struct fdtable *fdt;
-
- fdt = files_fdtable(files);
- f_flags = file->f_flags & ~O_CLOEXEC;
- if (FD_ISSET(fd, fdt->close_on_exec))
- f_flags |= O_CLOEXEC;
-
- if (path) {
- *path = file->f_path;
- path_get(&file->f_path);
+ if (task) {
+ files = get_files_struct(task);
+ put_task_struct(task);
+ }
+ if (files) {
+ /*
+ * We are not taking a ref to the file structure, so we must
+ * hold ->file_lock.
+ */
+ spin_lock(&files->file_lock);
+ file = fcheck_files(files, fd);
+ if (file) {
+ unsigned int f_flags;
+ struct fdtable *fdt;
+
+ fdt = files_fdtable(files);
+ f_flags = file->f_flags & ~O_CLOEXEC;
+ if (FD_ISSET(fd, fdt->close_on_exec))
+ f_flags |= O_CLOEXEC;
+
+ if (path) {
+ *path = file->f_path;
+ path_get(&file->f_path);
+ }
+ if (info)
+ snprintf(info, PROC_FDINFO_MAX,
+ "pos:\t%lli\n"
+ "flags:\t0%o\n",
+ (long long) file->f_pos,
+ f_flags);
+ spin_unlock(&files->file_lock);
+ put_files_struct(files);
+ return 0;
}
- if (info)
- snprintf(info, PROC_FDINFO_MAX,
- "pos:\t%lli\n"
- "flags:\t0%o\n",
- (long long) file->f_pos,
- f_flags);
- rc = 0;
- } else
- rc = -ENOENT;
- spin_unlock(&files->file_lock);
- put_files_struct(files);
-
-out_unlock:
- unlock_trace(task);
-out_task:
- put_task_struct(task);
- return rc;
+ spin_unlock(&files->file_lock);
+ put_files_struct(files);
+ }
+ return -ENOENT;
}
static int proc_fd_link(struct inode *inode, struct path *path)
spin_unlock(&files->file_lock);
put_files_struct(files);
- inode->i_op = &proc_fd_link_inode_operations;
+ inode->i_op = &proc_pid_link_inode_operations;
inode->i_size = 64;
ei->op.proc_get_link = proc_fd_link;
d_set_d_op(dentry, &tid_fd_dentry_operations);
if (fd == ~0U)
goto out;
- result = ERR_PTR(-EACCES);
- if (lock_trace(task))
- goto out;
-
result = instantiate(dir, dentry, task, &fd);
- unlock_trace(task);
out:
put_task_struct(task);
out_no_task:
retval = -ENOENT;
if (!p)
goto out_no_task;
-
- retval = -EACCES;
- if (lock_trace(p))
- goto out;
-
retval = 0;
fd = filp->f_pos;
switch (fd) {
case 0:
if (filldir(dirent, ".", 1, 0, inode->i_ino, DT_DIR) < 0)
- goto out_unlock;
+ goto out;
filp->f_pos++;
case 1:
ino = parent_ino(dentry);
if (filldir(dirent, "..", 2, 1, ino, DT_DIR) < 0)
- goto out_unlock;
+ goto out;
filp->f_pos++;
default:
files = get_files_struct(p);
if (!files)
- goto out_unlock;
+ goto out;
rcu_read_lock();
for (fd = filp->f_pos-2;
fd < files_fdtable(files)->max_fds;
rcu_read_unlock();
put_files_struct(files);
}
-
-out_unlock:
- unlock_trace(p);
out:
put_task_struct(p);
out_no_task:
ei->fd = fd;
inode->i_mode = S_IFREG | S_IRUSR;
inode->i_fop = &proc_fdinfo_file_operations;
- inode->i_op = &proc_fdinfo_link_inode_operations;
d_set_d_op(dentry, &tid_fd_dentry_operations);
d_add(dentry, inode);
/* Close the race of the process dying before we return the dentry */
#include <linux/user.h>
#include <linux/elf.h>
#include <linux/elfcore.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <linux/highmem.h>
#include <linux/bootmem.h>
/* caller already holds s_umount */
if (sb->s_flags & MS_RDONLY)
return -EROFS;
- writeback_inodes_sb(sb);
+ writeback_inodes_sb(sb, WB_REASON_SYNC);
return 0;
default:
return -EINVAL;
if (wait)
sync_inodes_sb(sb);
else
- writeback_inodes_sb(sb);
+ writeback_inodes_sb(sb, WB_REASON_SYNC);
if (sb->s_op->sync_fs)
sb->s_op->sync_fs(sb, wait);
*/
SYSCALL_DEFINE0(sync)
{
- wakeup_flusher_threads(0);
+ wakeup_flusher_threads(0, WB_REASON_SYNC);
sync_filesystems(0);
sync_filesystems(1);
if (unlikely(laptop_mode))
static void shrink_liability(struct ubifs_info *c, int nr_to_write)
{
down_read(&c->vfs_sb->s_umount);
- writeback_inodes_sb(c->vfs_sb);
+ writeback_inodes_sb(c->vfs_sb, WB_REASON_FS_FREE_SPACE);
up_read(&c->vfs_sb->s_umount);
}
spin_unlock(&dbg_lock);
}
+void dbg_dump_sleb(const struct ubifs_info *c,
+ const struct ubifs_scan_leb *sleb, int offs)
+{
+ struct ubifs_scan_node *snod;
+
+ printk(KERN_DEBUG "(pid %d) start dumping scanned data from LEB %d:%d\n",
+ current->pid, sleb->lnum, offs);
+
+ list_for_each_entry(snod, &sleb->nodes, list) {
+ cond_resched();
+ printk(KERN_DEBUG "Dumping node at LEB %d:%d len %d\n", sleb->lnum,
+ snod->offs, snod->len);
+ dbg_dump_node(c, snod->node);
+ }
+}
+
void dbg_dump_leb(const struct ubifs_info *c, int lnum)
{
struct ubifs_scan_leb *sleb;
void dbg_dump_lprops(struct ubifs_info *c);
void dbg_dump_lpt_info(struct ubifs_info *c);
void dbg_dump_leb(const struct ubifs_info *c, int lnum);
+void dbg_dump_sleb(const struct ubifs_info *c,
+ const struct ubifs_scan_leb *sleb, int offs);
void dbg_dump_znode(const struct ubifs_info *c,
const struct ubifs_znode *znode);
void dbg_dump_heap(struct ubifs_info *c, struct ubifs_lpt_heap *heap, int cat);
static inline void dbg_dump_leb(const struct ubifs_info *c,
int lnum) { return; }
static inline void
+dbg_dump_sleb(const struct ubifs_info *c,
+ const struct ubifs_scan_leb *sleb, int offs) { return; }
+static inline void
dbg_dump_znode(const struct ubifs_info *c,
const struct ubifs_znode *znode) { return; }
static inline void dbg_dump_heap(struct ubifs_info *c,
}
/**
- * clean_an_unclean_leb - read and write a LEB to remove corruption.
+ * clean_an_unclean_leb - read and write a LEB to remove corruption.
* @c: UBIFS file-system description object
* @ucleb: unclean LEB information
* @sbuf: LEB-sized buffer to use
mst->total_dirty = cpu_to_le64(tmp64);
/* The indexing LEB does not contribute to dark space */
- tmp64 = (c->main_lebs - 1) * c->dark_wm;
+ tmp64 = ((long long)(c->main_lebs - 1) * c->dark_wm);
mst->total_dark = cpu_to_le64(tmp64);
mst->total_used = cpu_to_le64(UBIFS_INO_NODE_SZ);
int error = 0;
if (XFS_FORCED_SHUTDOWN(ip->i_mount)) {
- error = -EIO;
+ ioend->io_error = -EIO;
goto done;
}
if (ioend->io_error)
/*
* This is the ops vector shared by all buf log items.
*/
-static struct xfs_item_ops xfs_buf_item_ops = {
+static const struct xfs_item_ops xfs_buf_item_ops = {
.iop_size = xfs_buf_item_size,
.iop_format = xfs_buf_item_format,
.iop_pin = xfs_buf_item_pin,
/*
* This is the ops vector for dquots
*/
-static struct xfs_item_ops xfs_dquot_item_ops = {
+static const struct xfs_item_ops xfs_dquot_item_ops = {
.iop_size = xfs_qm_dquot_logitem_size,
.iop_format = xfs_qm_dquot_logitem_format,
.iop_pin = xfs_qm_dquot_logitem_pin,
{
}
-static struct xfs_item_ops xfs_qm_qoffend_logitem_ops = {
+static const struct xfs_item_ops xfs_qm_qoffend_logitem_ops = {
.iop_size = xfs_qm_qoff_logitem_size,
.iop_format = xfs_qm_qoff_logitem_format,
.iop_pin = xfs_qm_qoff_logitem_pin,
/*
* This is the ops vector shared by all quotaoff-start log items.
*/
-static struct xfs_item_ops xfs_qm_qoff_logitem_ops = {
+static const struct xfs_item_ops xfs_qm_qoff_logitem_ops = {
.iop_size = xfs_qm_qoff_logitem_size,
.iop_format = xfs_qm_qoff_logitem_format,
.iop_pin = xfs_qm_qoff_logitem_pin,
/*
* This is the ops vector shared by all efi log items.
*/
-static struct xfs_item_ops xfs_efi_item_ops = {
+static const struct xfs_item_ops xfs_efi_item_ops = {
.iop_size = xfs_efi_item_size,
.iop_format = xfs_efi_item_format,
.iop_pin = xfs_efi_item_pin,
/*
* This is the ops vector shared by all efd log items.
*/
-static struct xfs_item_ops xfs_efd_item_ops = {
+static const struct xfs_item_ops xfs_efd_item_ops = {
.iop_size = xfs_efd_item_size,
.iop_format = xfs_efd_item_format,
.iop_pin = xfs_efd_item_pin,
/*
* This is the ops vector shared by all buf log items.
*/
-static struct xfs_item_ops xfs_inode_item_ops = {
+static const struct xfs_item_ops xfs_inode_item_ops = {
.iop_size = xfs_inode_item_size,
.iop_format = xfs_inode_item_format,
.iop_pin = xfs_inode_item_pin,
struct xfs_mount *mp,
struct xfs_log_item *item,
int type,
- struct xfs_item_ops *ops)
+ const struct xfs_item_ops *ops)
{
item->li_mountp = mp;
item->li_ailp = mp->m_ail;
void xfs_log_item_init(struct xfs_mount *mp,
struct xfs_log_item *item,
int type,
- struct xfs_item_ops *ops);
+ const struct xfs_item_ops *ops);
xfs_lsn_t xfs_log_done(struct xfs_mount *mp,
struct xlog_ticket *ticket,
* disk and we didn't ask it to allocate;
* ESRCH if quotas got turned off suddenly.
*/
- error = xfs_qm_dqget(ip->i_mount, ip, id, type, XFS_QMOPT_DOWARN, &dqp);
+ error = xfs_qm_dqget(ip->i_mount, ip, id, type,
+ doalloc | XFS_QMOPT_DOWARN, &dqp);
if (error)
return error;
struct xfs_log_item *);
/* buffer item iodone */
/* callback func */
- struct xfs_item_ops *li_ops; /* function list */
+ const struct xfs_item_ops *li_ops; /* function list */
/* delayed logging */
struct list_head li_cil; /* CIL pointers */
{ XFS_LI_IN_AIL, "IN_AIL" }, \
{ XFS_LI_ABORTED, "ABORTED" }
-typedef struct xfs_item_ops {
+struct xfs_item_ops {
uint (*iop_size)(xfs_log_item_t *);
void (*iop_format)(xfs_log_item_t *, struct xfs_log_iovec *);
void (*iop_pin)(xfs_log_item_t *);
void (*iop_push)(xfs_log_item_t *);
bool (*iop_pushbuf)(xfs_log_item_t *);
void (*iop_committing)(xfs_log_item_t *, xfs_lsn_t);
-} xfs_item_ops_t;
+};
#define IOP_SIZE(ip) (*(ip)->li_ops->iop_size)(ip)
#define IOP_FORMAT(ip,vp) (*(ip)->li_ops->iop_format)(ip, vp)
char *link)
{
xfs_mount_t *mp = ip->i_mount;
- int pathlen;
+ xfs_fsize_t pathlen;
int error = 0;
trace_xfs_readlink(ip);
xfs_ilock(ip, XFS_ILOCK_SHARED);
- ASSERT(S_ISLNK(ip->i_d.di_mode));
- ASSERT(ip->i_d.di_size <= MAXPATHLEN);
-
pathlen = ip->i_d.di_size;
if (!pathlen)
goto out;
+ if (pathlen < 0 || pathlen > MAXPATHLEN) {
+ xfs_alert(mp, "%s: inode (%llu) bad symlink length (%lld)",
+ __func__, (unsigned long long) ip->i_ino,
+ (long long) pathlen);
+ ASSERT(0);
+ return XFS_ERROR(EFSCORRUPTED);
+ }
+
+
if (ip->i_df.if_flags & XFS_IFINLINE) {
memcpy(link, ip->i_df.if_u1.if_data, pathlen);
link[pathlen] = '\0';
{
}
static inline int register_hotplug_dock_device(acpi_handle handle,
- struct acpi_dock_ops *ops,
+ const struct acpi_dock_ops *ops,
void *context)
{
return -ENODEV;
*/
#define ACPI_FULL_INITIALIZATION 0x00
#define ACPI_NO_ADDRESS_SPACE_INIT 0x01
-#define ACPI_NO_HARDWARE_INIT 0x02
#define ACPI_NO_EVENT_INIT 0x04
#define ACPI_NO_HANDLER_INIT 0x08
#define ACPI_NO_ACPI_ENABLE 0x10
#include <linux/string.h>
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/ctype.h>
#include <linux/sched.h>
#include <asm/system.h>
int acpi_processor_power_init(struct acpi_processor *pr,
struct acpi_device *device);
int acpi_processor_cst_has_changed(struct acpi_processor *pr);
+int acpi_processor_hotplug(struct acpi_processor *pr);
int acpi_processor_power_exit(struct acpi_processor *pr,
struct acpi_device *device);
int acpi_processor_suspend(struct acpi_device * device, pm_message_t state);
* can build the DRM (part of PI DRI). 4/21/2000 S + B */
#include <asm/current.h>
#endif /* __alpha__ */
-#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/miscdevice.h>
#include <linux/fs.h>
#define __OS_HAS_AGP (defined(CONFIG_AGP) || (defined(CONFIG_AGP_MODULE) && defined(MODULE)))
#define __OS_HAS_MTRR (defined(CONFIG_MTRR))
+struct module;
+
struct drm_file;
struct drm_device;
struct proc_dir_entry *proc_root; /**< proc directory entry */
struct drm_info_node proc_nodes;
struct dentry *debugfs_root;
- struct drm_info_node debugfs_nodes;
+
+ struct list_head debugfs_list;
+ struct mutex debugfs_lock; /* Protects debugfs_list. */
struct drm_master *master; /* currently active master for this node */
struct list_head master_list;
#define DP_MAIN_LINK_CHANNEL_CODING 0x006
+#define DP_EDP_CONFIGURATION_CAP 0x00d
#define DP_TRAINING_AUX_RD_INTERVAL 0x00e
#define DP_PSR_SUPPORT 0x070
# define DP_CP_IRQ (1 << 2)
# define DP_SINK_SPECIFIC_IRQ (1 << 6)
+#define DP_EDP_CONFIGURATION_SET 0x10a
+
#define DP_LANE0_1_STATUS 0x202
#define DP_LANE2_3_STATUS 0x203
# define DP_LANE_CR_DONE (1 << 0)
struct drm_mode_modeinfo mode;
};
-#define DRM_MODE_ENCODER_NONE 0
-#define DRM_MODE_ENCODER_DAC 1
-#define DRM_MODE_ENCODER_TMDS 2
-#define DRM_MODE_ENCODER_LVDS 3
-#define DRM_MODE_ENCODER_TVDAC 4
+#define DRM_MODE_ENCODER_NONE 0
+#define DRM_MODE_ENCODER_DAC 1
+#define DRM_MODE_ENCODER_TMDS 2
+#define DRM_MODE_ENCODER_LVDS 3
+#define DRM_MODE_ENCODER_TVDAC 4
+#define DRM_MODE_ENCODER_VIRTUAL 5
struct drm_mode_get_encoder {
__u32 encoder_id;
#define DRM_MODE_CONNECTOR_HDMIB 12
#define DRM_MODE_CONNECTOR_TV 13
#define DRM_MODE_CONNECTOR_eDP 14
+#define DRM_MODE_CONNECTOR_VIRTUAL 15
struct drm_mode_get_connector {
*/
#define radeon_PCI_IDS \
{0x1002, 0x3150, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
+ {0x1002, 0x3151, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x3152, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x3154, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x3155, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x4C64, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \
{0x1002, 0x4C66, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \
{0x1002, 0x4C67, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \
+ {0x1002, 0x4C6E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280|RADEON_IS_MOBILITY}, \
{0x1002, 0x4E44, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
{0x1002, 0x4E45, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
{0x1002, 0x4E46, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
* - this size value would be page-aligned internally.
* @flags: user request for setting memory type or cache attributes.
* @handle: returned handle for the object.
+ * @pad: just padding to be 64-bit aligned.
*/
struct drm_exynos_gem_create {
unsigned int size;
unsigned int flags;
unsigned int handle;
+ unsigned int pad;
};
/**
#define DRM_VMW_FENCE_EVENT 17
#define DRM_VMW_PRESENT 18
#define DRM_VMW_PRESENT_READBACK 19
-
+#define DRM_VMW_UPDATE_LAYOUT 20
/*************************************************************************/
/**
uint32_t pad64;
};
-/*************************************************************************/
-/**
- * DRM_VMW_UPDATE_LAYOUT - Update layout
- *
- * Updates the preferred modes and connection status for connectors. The
- * command conisits of one drm_vmw_update_layout_arg pointing out a array
- * of num_outputs drm_vmw_rect's.
- */
-
-/**
- * struct drm_vmw_update_layout_arg
- *
- * @num_outputs: number of active
- * @rects: pointer to array of drm_vmw_rect
- *
- * Input argument to the DRM_VMW_UPDATE_LAYOUT Ioctl.
- */
-
-struct drm_vmw_update_layout_arg {
- uint32_t num_outputs;
- uint32_t pad64;
- uint64_t rects;
-};
-
-
/*************************************************************************/
/**
* DRM_VMW_FENCE_WAIT
uint64_t clips_ptr;
uint64_t fence_rep;
};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_UPDATE_LAYOUT - Update layout
+ *
+ * Updates the preferred modes and connection status for connectors. The
+ * command consists of one drm_vmw_update_layout_arg pointing to an array
+ * of num_outputs drm_vmw_rect's.
+ */
+
+/**
+ * struct drm_vmw_update_layout_arg
+ *
+ * @num_outputs: number of active connectors
+ * @rects: pointer to array of drm_vmw_rect cast to an uint64_t
+ *
+ * Input argument to the DRM_VMW_UPDATE_LAYOUT Ioctl.
+ */
+struct drm_vmw_update_layout_arg {
+ uint32_t num_outputs;
+ uint32_t pad64;
+ uint64_t rects;
+};
+
#endif
enum bdi_stat_item {
BDI_RECLAIMABLE,
BDI_WRITEBACK,
+ BDI_DIRTIED,
BDI_WRITTEN,
NR_BDI_STAT_ITEMS
};
struct percpu_counter bdi_stat[NR_BDI_STAT_ITEMS];
unsigned long bw_time_stamp; /* last time write bw is updated */
+ unsigned long dirtied_stamp;
unsigned long written_stamp; /* pages written at bw_time_stamp */
unsigned long write_bandwidth; /* the estimated write bandwidth */
unsigned long avg_write_bandwidth; /* further smoothed write bw */
+ /*
+ * The base dirty throttle rate, re-calculated on every 200ms.
+ * All the bdi tasks' dirty rate will be curbed under it.
+ * @dirty_ratelimit tracks the estimated @balanced_dirty_ratelimit
+ * in small steps and is much more smooth/stable than the latter.
+ */
+ unsigned long dirty_ratelimit;
+ unsigned long balanced_dirty_ratelimit;
+
struct prop_local_percpu completions;
int dirty_exceeded;
int bdi_register_dev(struct backing_dev_info *bdi, dev_t dev);
void bdi_unregister(struct backing_dev_info *bdi);
int bdi_setup_and_register(struct backing_dev_info *, char *, unsigned int);
-void bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages);
+void bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages,
+ enum wb_reason reason);
void bdi_start_background_writeback(struct backing_dev_info *bdi);
int bdi_writeback_thread(void *data);
int bdi_has_dirty_io(struct backing_dev_info *bdi);
};
extern
int __bcma_driver_register(struct bcma_driver *drv, struct module *owner);
-static inline int bcma_driver_register(struct bcma_driver *drv)
-{
- return __bcma_driver_register(drv, THIS_MODULE);
-}
+#define bcma_driver_register(drv) \
+ __bcma_driver_register(drv, THIS_MODULE)
+
extern void bcma_driver_unregister(struct bcma_driver *drv);
struct bcma_bus {
extern struct bio_set *bioset_create(unsigned int, unsigned int);
extern void bioset_free(struct bio_set *);
-extern struct bio *bio_alloc(gfp_t, int);
-extern struct bio *bio_kmalloc(gfp_t, int);
+extern struct bio *bio_alloc(gfp_t, unsigned int);
+extern struct bio *bio_kmalloc(gfp_t, unsigned int);
extern struct bio *bio_alloc_bioset(gfp_t, int, struct bio_set *);
extern void bio_put(struct bio *);
extern void bio_free(struct bio *, struct bio_set *);
#define bioset_integrity_create(a, b) (0)
#define bio_integrity_prep(a) (0)
#define bio_integrity_enabled(a) (0)
-#define bio_integrity_clone(a, b, c, d) (0)
+static inline int bio_integrity_clone(struct bio *bio, struct bio *bio_src,
+ gfp_t gfp_mask, struct bio_set *bs)
+{
+ return 0;
+}
#define bioset_integrity_free(a) do { } while (0)
#define bio_integrity_free(a, b) do { } while (0)
#define bio_integrity_endio(a, b) do { } while (0)
#include <linux/wait.h>
#include <linux/mempool.h>
#include <linux/bio.h>
-#include <linux/module.h>
#include <linux/stringify.h>
#include <linux/gfp.h>
#include <linux/bsg.h>
#include <asm/scatterlist.h>
+struct module;
struct scsi_ioctl_command;
struct request_queue;
#include "osdmap.h"
#include "messenger.h"
+/*
+ * Maximum object name size
+ * (must be at least as big as RBD_MAX_MD_NAME_LEN -- currently 100)
+ */
+#define MAX_OBJ_NAME_SIZE 100
+
struct ceph_msg;
struct ceph_snap_context;
struct ceph_osd_request;
struct inode *r_inode; /* for use by callbacks */
void *r_priv; /* ditto */
- char r_oid[40]; /* object name */
+ char r_oid[MAX_OBJ_NAME_SIZE]; /* object name */
int r_oid_len;
unsigned long r_stamp; /* send OR check time */
#endif /* CONFIG_HOTPLUG_CPU */
#ifdef CONFIG_PM_SLEEP_SMP
-extern int suspend_cpu_hotplug;
-
extern int disable_nonboot_cpus(void);
extern void enable_nonboot_cpus(void);
#else /* !CONFIG_PM_SLEEP_SMP */
-#define suspend_cpu_hotplug 0
-
static inline int disable_nonboot_cpus(void) { return 0; }
static inline void enable_nonboot_cpus(void) {}
#endif /* !CONFIG_PM_SLEEP_SMP */
#include <linux/percpu.h>
#include <linux/list.h>
-#include <linux/module.h>
#include <linux/kobject.h>
#include <linux/completion.h>
#define CPUIDLE_NAME_LEN 16
#define CPUIDLE_DESC_LEN 32
+struct module;
+
struct cpuidle_device;
+struct cpuidle_driver;
/****************************
* CPUIDLE DEVICE INTERFACE *
****************************/
+struct cpuidle_state_usage {
+ void *driver_data;
+
+ unsigned long long usage;
+ unsigned long long time; /* in US */
+};
+
struct cpuidle_state {
char name[CPUIDLE_NAME_LEN];
char desc[CPUIDLE_DESC_LEN];
- void *driver_data;
unsigned int flags;
unsigned int exit_latency; /* in US */
unsigned int power_usage; /* in mW */
unsigned int target_residency; /* in US */
- unsigned long long usage;
- unsigned long long time; /* in US */
-
int (*enter) (struct cpuidle_device *dev,
- struct cpuidle_state *state);
+ struct cpuidle_driver *drv,
+ int index);
};
/* Idle State Flags */
#define CPUIDLE_FLAG_TIME_VALID (0x01) /* is residency time measurable? */
-#define CPUIDLE_FLAG_IGNORE (0x100) /* ignore during this idle period */
#define CPUIDLE_DRIVER_FLAGS_MASK (0xFFFF0000)
/**
* cpuidle_get_statedata - retrieves private driver state data
- * @state: the state
+ * @st_usage: the state usage statistics
*/
-static inline void * cpuidle_get_statedata(struct cpuidle_state *state)
+static inline void *cpuidle_get_statedata(struct cpuidle_state_usage *st_usage)
{
- return state->driver_data;
+ return st_usage->driver_data;
}
/**
* cpuidle_set_statedata - stores private driver state data
- * @state: the state
+ * @st_usage: the state usage statistics
* @data: the private data
*/
static inline void
-cpuidle_set_statedata(struct cpuidle_state *state, void *data)
+cpuidle_set_statedata(struct cpuidle_state_usage *st_usage, void *data)
{
- state->driver_data = data;
+ st_usage->driver_data = data;
}
struct cpuidle_state_kobj {
struct cpuidle_state *state;
+ struct cpuidle_state_usage *state_usage;
struct completion kobj_unregister;
struct kobject kobj;
};
struct cpuidle_device {
unsigned int registered:1;
unsigned int enabled:1;
- unsigned int power_specified:1;
unsigned int cpu;
int last_residency;
int state_count;
- struct cpuidle_state states[CPUIDLE_STATE_MAX];
+ struct cpuidle_state_usage states_usage[CPUIDLE_STATE_MAX];
struct cpuidle_state_kobj *kobjs[CPUIDLE_STATE_MAX];
- struct cpuidle_state *last_state;
struct list_head device_list;
struct kobject kobj;
struct completion kobj_unregister;
void *governor_data;
- struct cpuidle_state *safe_state;
-
- int (*prepare) (struct cpuidle_device *dev);
};
DECLARE_PER_CPU(struct cpuidle_device *, cpuidle_devices);
struct cpuidle_driver {
char name[CPUIDLE_NAME_LEN];
struct module *owner;
+
+ unsigned int power_specified:1;
+ struct cpuidle_state states[CPUIDLE_STATE_MAX];
+ int state_count;
+ int safe_state_index;
};
#ifdef CONFIG_CPU_IDLE
struct list_head governor_list;
unsigned int rating;
- int (*enable) (struct cpuidle_device *dev);
- void (*disable) (struct cpuidle_device *dev);
+ int (*enable) (struct cpuidle_driver *drv,
+ struct cpuidle_device *dev);
+ void (*disable) (struct cpuidle_driver *drv,
+ struct cpuidle_device *dev);
- int (*select) (struct cpuidle_device *dev);
- void (*reflect) (struct cpuidle_device *dev);
+ int (*select) (struct cpuidle_driver *drv,
+ struct cpuidle_device *dev);
+ void (*reflect) (struct cpuidle_device *dev, int index);
struct module *owner;
};
#define _LINUX_CRYPTO_H
#include <linux/atomic.h>
-#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/slab.h>
return tfm->__crt_alg->cra_priority;
}
-static inline const char *crypto_tfm_alg_modname(struct crypto_tfm *tfm)
-{
- return module_name(tfm->__crt_alg->cra_module);
-}
-
static inline u32 crypto_tfm_alg_type(struct crypto_tfm *tfm)
{
return tfm->__crt_alg->cra_flags & CRYPTO_ALG_TYPE_MASK;
unsigned long total_time;
unsigned long busy_time;
unsigned long current_frequency;
- void *private_date;
+ void *private_data;
};
/**
#include <linux/lockdep.h>
#include <linux/compiler.h>
#include <linux/types.h>
-#include <linux/module.h>
+#include <linux/mutex.h>
#include <linux/pm.h>
#include <linux/atomic.h>
#include <asm/device.h>
struct device_private;
struct device_driver;
struct driver_private;
+struct module;
struct class;
struct subsys_private;
struct bus_type;
return !!dev->power.async_suspend;
}
+static inline void pm_suspend_ignore_children(struct device *dev, bool enable)
+{
+ dev->power.ignore_children = enable;
+}
+
static inline void device_lock(struct device *dev)
{
mutex_lock(&dev->mutex);
*/
extern struct device *__root_device_register(const char *name,
struct module *owner);
-static inline struct device *root_device_register(const char *name)
-{
- return __root_device_register(name, THIS_MODULE);
-}
+
+/*
+ * This is a macro to avoid include problems with THIS_MODULE,
+ * just as per what is done for device_schedule_callback() above.
+ */
+#define root_device_register(name) \
+ __root_device_register(name, THIS_MODULE)
+
extern void root_device_unregister(struct device *root);
static inline void *dev_get_platdata(const struct device *dev)
-#include <linux/module.h>
#include <linux/fs.h>
#ifdef CONFIG_CGROUP_DEVICE
int (*mapping_error)(struct device *dev, dma_addr_t dma_addr);
int (*dma_supported)(struct device *dev, u64 mask);
int (*set_dma_mask)(struct device *dev, u64 mask);
+#ifdef ARCH_HAS_DMA_GET_REQUIRED_MASK
+ u64 (*get_required_mask)(struct device *dev);
+#endif
int is_phys;
};
#include <linux/uio.h>
#include <linux/dma-direction.h>
#include <linux/scatterlist.h>
+#include <linux/bitmap.h>
+#include <asm/page.h>
/**
* typedef dma_cookie_t - an opaque DMA cookie
#define SPEED_1000 1000
#define SPEED_2500 2500
#define SPEED_10000 10000
+#define SPEED_UNKNOWN -1
/* Duplex, half or full. */
#define DUPLEX_HALF 0x00
#define DUPLEX_FULL 0x01
+#define DUPLEX_UNKNOWN 0xff
/* Which connector port. */
#define PORT_TP 0x00
--- /dev/null
+#ifndef _LINUX_EXPORT_H
+#define _LINUX_EXPORT_H
+/*
+ * Export symbols from the kernel to modules. Forked from module.h
+ * to reduce the amount of pointless cruft we feed to gcc when only
+ * exporting a simple symbol or two.
+ *
+ * If you feel the need to add #include <linux/foo.h> to this file
+ * then you are doing something wrong and should go away silently.
+ */
+
+/* Some toolchains use a `_' prefix for all user symbols. */
+#ifdef CONFIG_SYMBOL_PREFIX
+#define MODULE_SYMBOL_PREFIX CONFIG_SYMBOL_PREFIX
+#else
+#define MODULE_SYMBOL_PREFIX ""
+#endif
+
+struct kernel_symbol
+{
+ unsigned long value;
+ const char *name;
+};
+
+#ifdef MODULE
+extern struct module __this_module;
+#define THIS_MODULE (&__this_module)
+#else
+#define THIS_MODULE ((struct module *)0)
+#endif
+
+#ifdef CONFIG_MODULES
+
+#ifndef __GENKSYMS__
+#ifdef CONFIG_MODVERSIONS
+/* Mark the CRC weak since genksyms apparently decides not to
+ * generate a checksums for some symbols */
+#define __CRC_SYMBOL(sym, sec) \
+ extern void *__crc_##sym __attribute__((weak)); \
+ static const unsigned long __kcrctab_##sym \
+ __used \
+ __attribute__((section("___kcrctab" sec "+" #sym), unused)) \
+ = (unsigned long) &__crc_##sym;
+#else
+#define __CRC_SYMBOL(sym, sec)
+#endif
+
+/* For every exported symbol, place a struct in the __ksymtab section */
+#define __EXPORT_SYMBOL(sym, sec) \
+ extern typeof(sym) sym; \
+ __CRC_SYMBOL(sym, sec) \
+ static const char __kstrtab_##sym[] \
+ __attribute__((section("__ksymtab_strings"), aligned(1))) \
+ = MODULE_SYMBOL_PREFIX #sym; \
+ static const struct kernel_symbol __ksymtab_##sym \
+ __used \
+ __attribute__((section("___ksymtab" sec "+" #sym), unused)) \
+ = { (unsigned long)&sym, __kstrtab_##sym }
+
+#define EXPORT_SYMBOL(sym) \
+ __EXPORT_SYMBOL(sym, "")
+
+#define EXPORT_SYMBOL_GPL(sym) \
+ __EXPORT_SYMBOL(sym, "_gpl")
+
+#define EXPORT_SYMBOL_GPL_FUTURE(sym) \
+ __EXPORT_SYMBOL(sym, "_gpl_future")
+
+#ifdef CONFIG_UNUSED_SYMBOLS
+#define EXPORT_UNUSED_SYMBOL(sym) __EXPORT_SYMBOL(sym, "_unused")
+#define EXPORT_UNUSED_SYMBOL_GPL(sym) __EXPORT_SYMBOL(sym, "_unused_gpl")
+#else
+#define EXPORT_UNUSED_SYMBOL(sym)
+#define EXPORT_UNUSED_SYMBOL_GPL(sym)
+#endif
+
+#endif /* __GENKSYMS__ */
+
+#else /* !CONFIG_MODULES... */
+
+#define EXPORT_SYMBOL(sym)
+#define EXPORT_SYMBOL_GPL(sym)
+#define EXPORT_SYMBOL_GPL_FUTURE(sym)
+#define EXPORT_UNUSED_SYMBOL(sym)
+#define EXPORT_UNUSED_SYMBOL_GPL(sym)
+
+#endif /* CONFIG_MODULES */
+
+#endif /* _LINUX_EXPORT_H */
#ifndef _LINUX_FIRMWARE_H
#define _LINUX_FIRMWARE_H
-#include <linux/module.h>
#include <linux/types.h>
#include <linux/compiler.h>
#include <linux/gfp.h>
struct page **pages;
};
+struct module;
struct device;
struct builtin_fw {
#define wait_event_freezekillable(wq, condition) \
({ \
int __retval; \
- do { \
- __retval = wait_event_killable(wq, \
- (condition) || freezing(current)); \
- if (__retval && !freezing(current)) \
- break; \
- else if (!(condition)) \
- __retval = -ERESTARTSYS; \
- } while (try_to_freeze()); \
+ freezer_do_not_count(); \
+ __retval = wait_event_killable(wq, (condition)); \
+ freezer_count(); \
__retval; \
})
extern struct dentry *mount_nodev(struct file_system_type *fs_type,
int flags, void *data,
int (*fill_super)(struct super_block *, void *, int));
+extern struct dentry *mount_subtree(struct vfsmount *mnt, const char *path);
void generic_shutdown_super(struct super_block *sb);
void kill_block_super(struct super_block *sb);
void kill_anon_super(struct super_block *sb);
#include <linux/kallsyms.h>
#include <linux/linkage.h>
#include <linux/bitops.h>
-#include <linux/module.h>
#include <linux/ktime.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <asm/ftrace.h>
+struct module;
struct ftrace_hash;
#ifdef CONFIG_FUNCTION_TRACER
#if defined(CONFIG_GAMEPORT) || (defined(MODULE) && defined(CONFIG_GAMEPORT_MODULE))
void __gameport_register_port(struct gameport *gameport, struct module *owner);
-static inline void gameport_register_port(struct gameport *gameport)
-{
- __gameport_register_port(gameport, THIS_MODULE);
-}
+/* use a define to avoid include chaining to get THIS_MODULE */
+#define gameport_register_port(gameport) \
+ __gameport_register_port(gameport, THIS_MODULE)
void gameport_unregister_port(struct gameport *gameport);
mutex_unlock(&gameport->drv_mutex);
}
-int __gameport_register_driver(struct gameport_driver *drv,
+int __must_check __gameport_register_driver(struct gameport_driver *drv,
struct module *owner, const char *mod_name);
-static inline int __must_check gameport_register_driver(struct gameport_driver *drv)
-{
- return __gameport_register_driver(drv, THIS_MODULE, KBUILD_MODNAME);
-}
+
+/* use a define to avoid include chaining to get THIS_MODULE & friends */
+#define gameport_register_driver(drv) \
+ __gameport_register_driver(drv, THIS_MODULE, KBUILD_MODNAME)
void gameport_unregister_driver(struct gameport_driver *drv);
#define dev_to_part(device) container_of((device), struct hd_struct, __dev)
#define disk_to_dev(disk) (&(disk)->part0.__dev)
#define part_to_dev(part) (&((part)->__dev))
-#define alias_name(disk) ((disk)->alias ? (disk)->alias : \
- (disk)->disk_name)
extern struct device_type part_type;
extern struct kobject *block_depr;
#define DISK_MAX_PARTS 256
#define DISK_NAME_LEN 32
-#define ALIAS_LEN 256
#include <linux/major.h>
#include <linux/device.h>
* disks that can't be partitioned. */
char disk_name[DISK_NAME_LEN]; /* name of major driver */
- char *alias; /* alias name of disk */
char *(*devnode)(struct gendisk *gd, mode_t *mode);
unsigned int events; /* supported events */
extern int __must_check __hid_register_driver(struct hid_driver *,
struct module *, const char *mod_name);
-static inline int __must_check hid_register_driver(struct hid_driver *driver)
-{
- return __hid_register_driver(driver, THIS_MODULE, KBUILD_MODNAME);
-}
+
+/* use a define to avoid include chaining to get THIS_MODULE & friends */
+#define hid_register_driver(driver) \
+ __hid_register_driver(driver, THIS_MODULE, KBUILD_MODNAME)
+
extern void hid_unregister_driver(struct hid_driver *);
extern void hidinput_hid_event(struct hid_device *, struct hid_field *, struct hid_usage *, __s32);
#define hugetlb_change_protection(vma, address, end, newprot)
-#ifndef HPAGE_MASK
-#define HPAGE_MASK PAGE_MASK /* Keep the compiler happy */
-#define HPAGE_SIZE PAGE_SIZE
-#endif
-
#endif /* !CONFIG_HUGETLB_PAGE */
#define HUGETLB_ANON_FILE "anon_hugepage"
static inline
void __hwspin_unlock(struct hwspinlock *hwlock, int mode, unsigned long *flags)
{
- return 0;
}
static inline int hwspin_lock_get_id(struct hwspinlock *hwlock)
#include <linux/types.h>
#ifdef __KERNEL__
-#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/device.h> /* for struct device */
#include <linux/sched.h> /* for completion */
union i2c_smbus_data;
struct i2c_board_info;
+struct module;
+
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
/*
* The master routines are the ones normally used to transmit data to devices
extern int i2c_register_driver(struct module *, struct i2c_driver *);
extern void i2c_del_driver(struct i2c_driver *);
-static inline int i2c_add_driver(struct i2c_driver *driver)
-{
- return i2c_register_driver(THIS_MODULE, driver);
-}
+/* use a define to avoid include chaining to get THIS_MODULE */
+#define i2c_add_driver(driver) \
+ i2c_register_driver(THIS_MODULE, driver)
extern struct i2c_client *i2c_use_client(struct i2c_client *client);
extern void i2c_release_client(struct i2c_client *client);
INET_DIAG_VEGASINFO,
INET_DIAG_CONG,
INET_DIAG_TOS,
+ INET_DIAG_TCLASS,
};
-#define INET_DIAG_MAX INET_DIAG_TOS
+#define INET_DIAG_MAX INET_DIAG_TCLASS
/* INET_DIAG_MEM */
* The in-kernel interface.
*/
#include <linux/list.h>
-#include <linux/module.h>
#include <linux/device.h>
#include <linux/proc_fs.h>
+struct module;
+
/* Opaque type for a IPMI message user. One of these is needed to
send and receive messages. */
typedef struct ipmi_user *ipmi_user_t;
#include <linux/ipmi_msgdefs.h>
#include <linux/proc_fs.h>
-#include <linux/module.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/ipmi.h>
#include <linux/errno.h>
#include <linux/topology.h>
#include <linux/wait.h>
-#include <linux/module.h>
#include <asm/irq.h>
#include <asm/ptrace.h>
#include <asm/irq_regs.h>
struct seq_file;
+struct module;
struct irq_desc;
struct irq_data;
typedef void (*irq_flow_handler_t)(unsigned int irq,
int __irq_alloc_descs(int irq, unsigned int from, unsigned int cnt, int node,
struct module *owner);
-static inline int irq_alloc_descs(int irq, unsigned int from, unsigned int cnt,
- int node)
-{
- return __irq_alloc_descs(irq, from, cnt, node, THIS_MODULE);
-}
+/* use macros to avoid needing export.h for THIS_MODULE */
+#define irq_alloc_descs(irq, from, cnt, node) \
+ __irq_alloc_descs(irq, from, cnt, node, THIS_MODULE)
-void irq_free_descs(unsigned int irq, unsigned int cnt);
-int irq_reserve_irqs(unsigned int from, unsigned int cnt);
+#define irq_alloc_desc(node) \
+ irq_alloc_descs(-1, 0, 1, node)
-static inline int irq_alloc_desc(int node)
-{
- return irq_alloc_descs(-1, 0, 1, node);
-}
+#define irq_alloc_desc_at(at, node) \
+ irq_alloc_descs(at, at, 1, node)
-static inline int irq_alloc_desc_at(unsigned int at, int node)
-{
- return irq_alloc_descs(at, at, 1, node);
-}
+#define irq_alloc_desc_from(from, node) \
+ irq_alloc_descs(-1, from, 1, node)
-static inline int irq_alloc_desc_from(unsigned int from, int node)
-{
- return irq_alloc_descs(-1, from, 1, node);
-}
+void irq_free_descs(unsigned int irq, unsigned int cnt);
+int irq_reserve_irqs(unsigned int from, unsigned int cnt);
static inline void irq_free_desc(unsigned int irq)
{
struct irq_affinity_notify;
struct proc_dir_entry;
struct timer_rand_state;
+struct module;
/**
* struct irq_desc - interrupt descriptor
* @irq_data: per irq and chip data passed down to chip functions
# include <asm/jump_label.h>
# define HAVE_JUMP_LABEL
-#endif
+#endif /* CC_HAVE_ASM_GOTO && CONFIG_JUMP_LABEL */
enum jump_label_type {
JUMP_LABEL_DISABLE = 0,
#ifdef HAVE_JUMP_LABEL
#ifdef CONFIG_MODULES
-#define JUMP_LABEL_INIT {{ 0 }, NULL, NULL}
+#define JUMP_LABEL_INIT {ATOMIC_INIT(0), NULL, NULL}
#else
-#define JUMP_LABEL_INIT {{ 0 }, NULL}
+#define JUMP_LABEL_INIT {ATOMIC_INIT(0), NULL}
#endif
static __always_inline bool static_branch(struct jump_label_key *key)
extern struct jump_entry __start___jump_table[];
extern struct jump_entry __stop___jump_table[];
+extern void jump_label_init(void);
extern void jump_label_lock(void);
extern void jump_label_unlock(void);
extern void arch_jump_label_transform(struct jump_entry *entry,
- enum jump_label_type type);
-extern void arch_jump_label_text_poke_early(jump_label_t addr);
+ enum jump_label_type type);
+extern void arch_jump_label_transform_static(struct jump_entry *entry,
+ enum jump_label_type type);
extern int jump_label_text_reserved(void *start, void *end);
extern void jump_label_inc(struct jump_label_key *key);
extern void jump_label_dec(struct jump_label_key *key);
extern bool jump_label_enabled(struct jump_label_key *key);
extern void jump_label_apply_nops(struct module *mod);
-#else
+#else /* !HAVE_JUMP_LABEL */
#include <linux/atomic.h>
atomic_t enabled;
};
+static __always_inline void jump_label_init(void)
+{
+}
+
static __always_inline bool static_branch(struct jump_label_key *key)
{
if (unlikely(atomic_read(&key->enabled)))
{
return 0;
}
+#endif /* HAVE_JUMP_LABEL */
-#endif
-
-#endif
+#endif /* _LINUX_JUMP_LABEL_H */
#define TAINT_WARN 9
#define TAINT_CRAP 10
#define TAINT_FIRMWARE_WORKAROUND 11
+#define TAINT_OOT_MODULE 12
extern const char hex_asc[];
#define hex_asc_lo(x) hex_asc[((x) & 0x0f)]
#define KVM_CAP_PPC_SMT 64
#define KVM_CAP_PPC_RMA 65
#define KVM_CAP_MAX_VCPUS 66 /* returns max vcpus per vm */
-#define KVM_CAP_PPC_HIOR 67
#define KVM_CAP_PPC_PAPR 68
#define KVM_CAP_S390_GMAP 71
#define __LINUX_MDIO_BITBANG_H
#include <linux/phy.h>
-#include <linux/module.h>
+
+struct module;
struct mdiobb_ctrl;
#define WM8958_MICB2_DISCH_SHIFT 0 /* MICB2_DISCH */
#define WM8958_MICB2_DISCH_WIDTH 1 /* MICB2_DISCH */
+/*
+ * R210 (0xD2) - Mic Detect 3
+ */
+#define WM8958_MICD_LVL_MASK 0x07FC /* MICD_LVL - [10:2] */
+#define WM8958_MICD_LVL_SHIFT 2 /* MICD_LVL - [10:2] */
+#define WM8958_MICD_LVL_WIDTH 9 /* MICD_LVL - [10:2] */
+#define WM8958_MICD_VALID 0x0002 /* MICD_VALID */
+#define WM8958_MICD_VALID_MASK 0x0002 /* MICD_VALID */
+#define WM8958_MICD_VALID_SHIFT 1 /* MICD_VALID */
+#define WM8958_MICD_VALID_WIDTH 1 /* MICD_VALID */
+#define WM8958_MICD_STS 0x0001 /* MICD_STS */
+#define WM8958_MICD_STS_MASK 0x0001 /* MICD_STS */
+#define WM8958_MICD_STS_SHIFT 0 /* MICD_STS */
+#define WM8958_MICD_STS_WIDTH 1 /* MICD_STS */
+
/*
* R76 (0x4C) - Charge Pump (1)
*/
#ifndef _LINUX_MISCDEVICE_H
#define _LINUX_MISCDEVICE_H
-#include <linux/module.h>
#include <linux/major.h>
+#include <linux/list.h>
+#include <linux/types.h>
/*
* These allocations are managed by device@lanana.org. If you use an
#include <linux/kobject.h>
#include <linux/moduleparam.h>
#include <linux/tracepoint.h>
+#include <linux/export.h>
#include <linux/percpu.h>
#include <asm/module.h>
/* Not Yet Implemented */
#define MODULE_SUPPORTED_DEVICE(name)
-/* Some toolchains use a `_' prefix for all user symbols. */
-#ifdef CONFIG_SYMBOL_PREFIX
-#define MODULE_SYMBOL_PREFIX CONFIG_SYMBOL_PREFIX
-#else
-#define MODULE_SYMBOL_PREFIX ""
-#endif
-
#define MODULE_NAME_LEN MAX_PARAM_PREFIX_LEN
-struct kernel_symbol
-{
- unsigned long value;
- const char *name;
-};
-
struct modversion_info
{
unsigned long crc;
extern const struct gtype##_id __mod_##gtype##_table \
__attribute__ ((unused, alias(__stringify(name))))
-extern struct module __this_module;
-#define THIS_MODULE (&__this_module)
#else /* !MODULE */
#define MODULE_GENERIC_TABLE(gtype,name)
-#define THIS_MODULE ((struct module *)0)
#endif
/* Generic info of form tag = "info" */
/* What your module does. */
#define MODULE_DESCRIPTION(_description) MODULE_INFO(description, _description)
-/* One for each parameter, describing how to use it. Some files do
- multiple of these per line, so can't just use MODULE_INFO. */
-#define MODULE_PARM_DESC(_parm, desc) \
- __MODULE_INFO(parm, _parm, #_parm ":" desc)
-
#define MODULE_DEVICE_TABLE(type,name) \
MODULE_GENERIC_TABLE(type##_device,name)
struct module *source, *target;
};
-#ifndef __GENKSYMS__
-#ifdef CONFIG_MODVERSIONS
-/* Mark the CRC weak since genksyms apparently decides not to
- * generate a checksums for some symbols */
-#define __CRC_SYMBOL(sym, sec) \
- extern void *__crc_##sym __attribute__((weak)); \
- static const unsigned long __kcrctab_##sym \
- __used \
- __attribute__((section("___kcrctab" sec "+" #sym), unused)) \
- = (unsigned long) &__crc_##sym;
-#else
-#define __CRC_SYMBOL(sym, sec)
-#endif
-
-/* For every exported symbol, place a struct in the __ksymtab section */
-#define __EXPORT_SYMBOL(sym, sec) \
- extern typeof(sym) sym; \
- __CRC_SYMBOL(sym, sec) \
- static const char __kstrtab_##sym[] \
- __attribute__((section("__ksymtab_strings"), aligned(1))) \
- = MODULE_SYMBOL_PREFIX #sym; \
- static const struct kernel_symbol __ksymtab_##sym \
- __used \
- __attribute__((section("___ksymtab" sec "+" #sym), unused)) \
- = { (unsigned long)&sym, __kstrtab_##sym }
-
-#define EXPORT_SYMBOL(sym) \
- __EXPORT_SYMBOL(sym, "")
-
-#define EXPORT_SYMBOL_GPL(sym) \
- __EXPORT_SYMBOL(sym, "_gpl")
-
-#define EXPORT_SYMBOL_GPL_FUTURE(sym) \
- __EXPORT_SYMBOL(sym, "_gpl_future")
-
-
-#ifdef CONFIG_UNUSED_SYMBOLS
-#define EXPORT_UNUSED_SYMBOL(sym) __EXPORT_SYMBOL(sym, "_unused")
-#define EXPORT_UNUSED_SYMBOL_GPL(sym) __EXPORT_SYMBOL(sym, "_unused_gpl")
-#else
-#define EXPORT_UNUSED_SYMBOL(sym)
-#define EXPORT_UNUSED_SYMBOL_GPL(sym)
-#endif
-
-#endif
-
enum module_state
{
MODULE_STATE_LIVE,
extern void print_modules(void);
#else /* !CONFIG_MODULES... */
-#define EXPORT_SYMBOL(sym)
-#define EXPORT_SYMBOL_GPL(sym)
-#define EXPORT_SYMBOL_GPL_FUTURE(sym)
-#define EXPORT_UNUSED_SYMBOL(sym)
-#define EXPORT_UNUSED_SYMBOL_GPL(sym)
/* Given an address, look for it in the exception tables. */
static inline const struct exception_table_entry *
#define __MODULE_PARM_TYPE(name, _type) \
__MODULE_INFO(parmtype, name##type, #name ":" _type)
+/* One for each parameter, describing how to use it. Some files do
+ multiple of these per line, so can't just use MODULE_INFO. */
+#define MODULE_PARM_DESC(_parm, desc) \
+ __MODULE_INFO(parm, _parm, #_parm ":" desc)
+
struct kernel_param;
struct kernel_param_ops {
#define NAND_BBT_VERSION 0x00000100
/* Create a bbt if none exists */
#define NAND_BBT_CREATE 0x00000200
+/*
+ * Create an empty BBT with no vendor information. Vendor's information may be
+ * unavailable, for example, if the NAND controller has a different data and OOB
+ * layout or if this information is already purged. Must be used in conjunction
+ * with NAND_BBT_CREATE.
+ */
+#define NAND_BBT_CREATE_EMPTY 0x00000400
/* Search good / bad pattern through all pages of a block */
-#define NAND_BBT_SCANALLPAGES 0x00000400
+#define NAND_BBT_SCANALLPAGES 0x00000800
/* Scan block empty during good / bad block scan */
-#define NAND_BBT_SCANEMPTY 0x00000800
+#define NAND_BBT_SCANEMPTY 0x00001000
/* Write bbt if neccecary */
-#define NAND_BBT_WRITE 0x00001000
+#define NAND_BBT_WRITE 0x00002000
/* Read and write back block contents when writing bbt */
-#define NAND_BBT_SAVECONTENT 0x00002000
+#define NAND_BBT_SAVECONTENT 0x00004000
/* Search good / bad pattern on the first and the second page */
-#define NAND_BBT_SCAN2NDPAGE 0x00004000
+#define NAND_BBT_SCAN2NDPAGE 0x00008000
/* Search good / bad pattern on the last page of the eraseblock */
-#define NAND_BBT_SCANLASTPAGE 0x00008000
-/* Chip stores bad block marker on BOTH 1st and 6th bytes of OOB */
-#define NAND_BBT_SCANBYTE1AND6 0x00100000
-/* The nand_bbt_descr was created dynamicaly and must be freed */
-#define NAND_BBT_DYNAMICSTRUCT 0x00200000
-/* The bad block table does not OOB for marker */
-#define NAND_BBT_NO_OOB 0x00400000
+#define NAND_BBT_SCANLASTPAGE 0x00010000
+/*
+ * Use a flash based bad block table. By default, OOB identifier is saved in
+ * OOB area. This option is passed to the default bad block table function.
+ */
+#define NAND_BBT_USE_FLASH 0x00020000
+/* Do not store flash based bad block table in OOB area; store it in-band */
+#define NAND_BBT_NO_OOB 0x00040000
+
+/*
+ * Flag set by nand_create_default_bbt_descr(), marking that the nand_bbt_descr
+ * was allocated dynamicaly and must be freed in nand_release(). Has no meaning
+ * in nand_chip.bbt_options.
+ */
+#define NAND_BBT_DYNAMICSTRUCT 0x80000000
/* The maximum number of blocks to scan for a bbt */
#define NAND_BBT_SCAN_MAXBLOCKS 4
#define __MTD_MTD_H__
#include <linux/types.h>
-#include <linux/module.h>
#include <linux/uio.h>
#include <linux/notifier.h>
#include <linux/device.h>
#define MTD_CHAR_MAJOR 90
#define MTD_BLOCK_MAJOR 31
-#define MTD_ERASE_PENDING 0x01
+#define MTD_ERASE_PENDING 0x01
#define MTD_ERASING 0x02
#define MTD_ERASE_SUSPEND 0x04
-#define MTD_ERASE_DONE 0x08
-#define MTD_ERASE_FAILED 0x10
+#define MTD_ERASE_DONE 0x08
+#define MTD_ERASE_FAILED 0x10
#define MTD_FAIL_ADDR_UNKNOWN -1LL
-/* If the erase fails, fail_addr might indicate exactly which block failed. If
- fail_addr = MTD_FAIL_ADDR_UNKNOWN, the failure was not at the device level or was not
- specific to any particular block. */
+/*
+ * If the erase fails, fail_addr might indicate exactly which block failed. If
+ * fail_addr = MTD_FAIL_ADDR_UNKNOWN, the failure was not at the device level
+ * or was not specific to any particular block.
+ */
struct erase_info {
struct mtd_info *mtd;
uint64_t addr;
};
struct mtd_erase_region_info {
- uint64_t offset; /* At which this region starts, from the beginning of the MTD */
+ uint64_t offset; /* At which this region starts, from the beginning of the MTD */
uint32_t erasesize; /* For this region */
uint32_t numblocks; /* Number of blocks of erasesize in this region */
unsigned long *lockmap; /* If keeping bitmap of locks */
};
-/*
- * oob operation modes
- *
- * MTD_OOB_PLACE: oob data are placed at the given offset
- * MTD_OOB_AUTO: oob data are automatically placed at the free areas
- * which are defined by the ecclayout
- * MTD_OOB_RAW: mode to read oob and data without doing ECC checking
- */
-typedef enum {
- MTD_OOB_PLACE,
- MTD_OOB_AUTO,
- MTD_OOB_RAW,
-} mtd_oob_mode_t;
-
/**
* struct mtd_oob_ops - oob operation operands
* @mode: operation mode
* @ooblen: number of oob bytes to write/read
* @oobretlen: number of oob bytes written/read
* @ooboffs: offset of oob data in the oob area (only relevant when
- * mode = MTD_OOB_PLACE)
+ * mode = MTD_OPS_PLACE_OOB or MTD_OPS_RAW)
* @datbuf: data buffer - if NULL only oob data are read/written
* @oobbuf: oob data buffer
*
* OOB area.
*/
struct mtd_oob_ops {
- mtd_oob_mode_t mode;
+ unsigned int mode;
size_t len;
size_t retlen;
size_t ooblen;
struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES_LARGE];
};
+struct module; /* only needed for owner field in mtd_info */
+
struct mtd_info {
u_char type;
uint32_t flags;
const char *name;
int index;
- /* ecc layout structure pointer - read only ! */
+ /* ECC layout structure pointer - read only! */
struct nand_ecclayout *ecclayout;
/* Data for variable erase regions. If numeraseregions is zero,
/* Kernel-side ioctl definitions */
struct mtd_partition;
-
-extern int mtd_device_register(struct mtd_info *master,
- const struct mtd_partition *parts,
- int nr_parts);
+struct mtd_part_parser_data;
+
+extern int mtd_device_parse_register(struct mtd_info *mtd,
+ const char **part_probe_types,
+ struct mtd_part_parser_data *parser_data,
+ const struct mtd_partition *defparts,
+ int defnr_parts);
+#define mtd_device_register(master, parts, nr_parts) \
+ mtd_device_parse_register(master, NULL, NULL, parts, nr_parts)
extern int mtd_device_unregister(struct mtd_info *master);
extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
extern int __get_mtd_device(struct mtd_info *mtd);
void mtd_erase_callback(struct erase_info *instr);
-/*
- * Debugging macro and defines
- */
-#define MTD_DEBUG_LEVEL0 (0) /* Quiet */
-#define MTD_DEBUG_LEVEL1 (1) /* Audible */
-#define MTD_DEBUG_LEVEL2 (2) /* Loud */
-#define MTD_DEBUG_LEVEL3 (3) /* Noisy */
-
-#ifdef CONFIG_MTD_DEBUG
-#define DEBUG(n, args...) \
- do { \
- if (n <= CONFIG_MTD_DEBUG_VERBOSE) \
- printk(KERN_INFO args); \
- } while(0)
-#else /* CONFIG_MTD_DEBUG */
-#define DEBUG(n, args...) \
- do { \
- if (0) \
- printk(KERN_INFO args); \
- } while(0)
-
-#endif /* CONFIG_MTD_DEBUG */
+static inline int mtd_is_bitflip(int err) {
+ return err == -EUCLEAN;
+}
+
+static inline int mtd_is_eccerr(int err) {
+ return err == -EBADMSG;
+}
+
+static inline int mtd_is_bitflip_or_eccerr(int err) {
+ return mtd_is_bitflip(err) || mtd_is_eccerr(err);
+}
#endif /* __MTD_MTD_H__ */
/* Internal helper for board drivers which need to override command function */
extern void nand_wait_ready(struct mtd_info *mtd);
-/* locks all blockes present in the device */
+/* locks all blocks present in the device */
extern int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
-/* unlocks specified locked blockes */
+/* unlocks specified locked blocks */
extern int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
/* The maximum number of NAND chips in an array */
#define NAND_ECC_READ 0
/* Reset Hardware ECC for write */
#define NAND_ECC_WRITE 1
-/* Enable Hardware ECC before syndrom is read back from flash */
+/* Enable Hardware ECC before syndrome is read back from flash */
#define NAND_ECC_READSYN 2
/* Bit mask for flags passed to do_nand_read_ecc */
*/
/* Chip can not auto increment pages */
#define NAND_NO_AUTOINCR 0x00000001
-/* Buswitdh is 16 bit */
+/* Buswidth is 16 bit */
#define NAND_BUSWIDTH_16 0x00000002
/* Device supports partial programming without padding */
#define NAND_NO_PADDING 0x00000004
#define NAND_CHIPOPTIONS_MSK (0x0000ffff & ~NAND_NO_AUTOINCR)
/* Non chip related options */
-/*
- * Use a flash based bad block table. OOB identifier is saved in OOB area.
- * This option is passed to the default bad block table function.
- */
-#define NAND_USE_FLASH_BBT 0x00010000
/* This option skips the bbt scan during initialization. */
-#define NAND_SKIP_BBTSCAN 0x00020000
+#define NAND_SKIP_BBTSCAN 0x00010000
/*
* This option is defined if the board driver allocates its own buffers
* (e.g. because it needs them DMA-coherent).
*/
-#define NAND_OWN_BUFFERS 0x00040000
+#define NAND_OWN_BUFFERS 0x00020000
/* Chip may not exist, so silence any errors in scan */
-#define NAND_SCAN_SILENT_NODEV 0x00080000
-/*
- * If passed additionally to NAND_USE_FLASH_BBT then BBT code will not touch
- * the OOB area.
- */
-#define NAND_USE_FLASH_BBT_NO_OOB 0x00800000
-/* Create an empty BBT with no vendor information if the BBT is available */
-#define NAND_CREATE_EMPTY_BBT 0x01000000
+#define NAND_SCAN_SILENT_NODEV 0x00040000
/* Options set by nand scan */
/* Nand scan has allocated controller struct */
};
/**
- * struct nand_ecc_ctrl - Control structure for ecc
- * @mode: ecc mode
- * @steps: number of ecc steps per page
- * @size: data bytes per ecc step
- * @bytes: ecc bytes per step
- * @total: total number of ecc bytes per page
- * @prepad: padding information for syndrome based ecc generators
- * @postpad: padding information for syndrome based ecc generators
+ * struct nand_ecc_ctrl - Control structure for ECC
+ * @mode: ECC mode
+ * @steps: number of ECC steps per page
+ * @size: data bytes per ECC step
+ * @bytes: ECC bytes per step
+ * @total: total number of ECC bytes per page
+ * @prepad: padding information for syndrome based ECC generators
+ * @postpad: padding information for syndrome based ECC generators
* @layout: ECC layout control struct pointer
- * @priv: pointer to private ecc control data
- * @hwctl: function to control hardware ecc generator. Must only
+ * @priv: pointer to private ECC control data
+ * @hwctl: function to control hardware ECC generator. Must only
* be provided if an hardware ECC is available
- * @calculate: function for ecc calculation or readback from ecc hardware
- * @correct: function for ecc correction, matching to ecc generator (sw/hw)
+ * @calculate: function for ECC calculation or readback from ECC hardware
+ * @correct: function for ECC correction, matching to ECC generator (sw/hw)
* @read_page_raw: function to read a raw page without ECC
* @write_page_raw: function to write a raw page without ECC
- * @read_page: function to read a page according to the ecc generator
+ * @read_page: function to read a page according to the ECC generator
* requirements.
* @read_subpage: function to read parts of the page covered by ECC.
- * @write_page: function to write a page according to the ecc generator
+ * @write_page: function to write a page according to the ECC generator
* requirements.
+ * @write_oob_raw: function to write chip OOB data without ECC
+ * @read_oob_raw: function to read chip OOB data without ECC
* @read_oob: function to read chip OOB data
* @write_oob: function to write chip OOB data
*/
uint32_t offs, uint32_t len, uint8_t *buf);
void (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf);
+ int (*write_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+ int page);
+ int (*read_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+ int page, int sndcmd);
int (*read_oob)(struct mtd_info *mtd, struct nand_chip *chip, int page,
int sndcmd);
int (*write_oob)(struct mtd_info *mtd, struct nand_chip *chip,
/**
* struct nand_buffers - buffer structure for read/write
- * @ecccalc: buffer for calculated ecc
- * @ecccode: buffer for ecc read from flash
+ * @ecccalc: buffer for calculated ECC
+ * @ecccode: buffer for ECC read from flash
* @databuf: buffer for data - dynamically sized
*
* Do not change the order of buffers. databuf and oobrbuf must be in
* mtd->oobsize, mtd->writesize and so on.
* @id_data contains the 8 bytes values of NAND_CMD_READID.
* Return with the bus width.
- * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accesing
+ * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accessing
* device ready/busy line. If set to NULL no access to
* ready/busy is available and the ready/busy information
* is read from the chip status register.
* commands to the chip.
* @waitfunc: [REPLACEABLE] hardwarespecific function for wait on
* ready.
- * @ecc: [BOARDSPECIFIC] ecc control ctructure
+ * @ecc: [BOARDSPECIFIC] ECC control structure
* @buffers: buffer structure for read/write
* @hwcontrol: platform-specific hardware control structure
- * @ops: oob operation operands
* @erase_cmd: [INTERN] erase command write function, selectable due
* to AND support.
* @scan_bbt: [REPLACEABLE] function to scan bad block table
* @chip_delay: [BOARDSPECIFIC] chip dependent delay for transferring
* data from array to read regs (tR).
* @state: [INTERN] the current state of the NAND device
- * @oob_poi: poison value buffer
+ * @oob_poi: "poison value buffer," used for laying out OOB data
+ * before writing
* @page_shift: [INTERN] number of address bits in a page (column
* address bits).
* @phys_erase_shift: [INTERN] number of address bits in a physical eraseblock
* @options: [BOARDSPECIFIC] various chip options. They can partly
* be set to inform nand_scan about special functionality.
* See the defines for further explanation.
+ * @bbt_options: [INTERN] bad block specific options. All options used
+ * here must come from bbm.h. By default, these options
+ * will be copied to the appropriate nand_bbt_descr's.
* @badblockpos: [INTERN] position of the bad block marker in the oob
* area.
* @badblockbits: [INTERN] number of bits to left-shift the bad block
* non 0 if ONFI supported.
* @onfi_params: [INTERN] holds the ONFI page parameter when ONFI is
* supported, 0 otherwise.
- * @ecclayout: [REPLACEABLE] the default ecc placement scheme
+ * @ecclayout: [REPLACEABLE] the default ECC placement scheme
* @bbt: [INTERN] bad block table pointer
* @bbt_td: [REPLACEABLE] bad block table descriptor for flash
* lookup.
* @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial
* bad block scan.
* @controller: [REPLACEABLE] a pointer to a hardware controller
- * structure which is shared among multiple independend
+ * structure which is shared among multiple independent
* devices.
- * @priv: [OPTIONAL] pointer to private chip date
+ * @priv: [OPTIONAL] pointer to private chip data
* @errstat: [OPTIONAL] hardware specific function to perform
* additional error status checks (determine if errors are
* correctable).
int chip_delay;
unsigned int options;
+ unsigned int bbt_options;
int page_shift;
int phys_erase_shift;
struct nand_buffers *buffers;
struct nand_hw_control hwcontrol;
- struct mtd_oob_ops ops;
-
uint8_t *bbt;
struct nand_bbt_descr *bbt_td;
struct nand_bbt_descr *bbt_md;
* @partitions: mtd partition list
* @chip_delay: R/B delay value in us
* @options: Option flags, e.g. 16bit buswidth
- * @ecclayout: ecc layout info structure
+ * @bbt_options: BBT option flags, e.g. NAND_BBT_USE_FLASH
+ * @ecclayout: ECC layout info structure
* @part_probe_types: NULL-terminated array of probe types
- * @set_parts: platform specific function to set partitions
- * @priv: hardware controller specific settings
*/
struct platform_nand_chip {
int nr_chips;
struct nand_ecclayout *ecclayout;
int chip_delay;
unsigned int options;
+ unsigned int bbt_options;
const char **part_probe_types;
- void (*set_parts)(uint64_t size, struct platform_nand_chip *chip);
- void *priv;
};
/* Keep gcc happy */
#define ONENAND_IS_CACHE_PROGRAM(this) \
(this->options & ONENAND_HAS_CACHE_PROGRAM)
+#define ONENAND_IS_NOP_1(this) \
+ (this->options & ONENAND_HAS_NOP_1)
+
/* Check byte access in OneNAND */
#define ONENAND_CHECK_BYTE_ACCESS(addr) (addr & 0x1)
#define ONENAND_HAS_2PLANE (0x0004)
#define ONENAND_HAS_4KB_PAGE (0x0008)
#define ONENAND_HAS_CACHE_PROGRAM (0x0010)
+#define ONENAND_HAS_NOP_1 (0x0020)
#define ONENAND_SKIP_UNLOCK_CHECK (0x0100)
#define ONENAND_PAGEBUF_ALLOC (0x1000)
#define ONENAND_OOBBUF_ALLOC (0x2000)
* will extend to the end of the master MTD device.
* offset: absolute starting position within the master MTD device; if
* defined as MTDPART_OFS_APPEND, the partition will start where the
- * previous one ended; if MTDPART_OFS_NXTBLK, at the next erase block.
+ * previous one ended; if MTDPART_OFS_NXTBLK, at the next erase block;
+ * if MTDPART_OFS_RETAIN, consume as much as possible, leaving size
+ * after the end of partition.
* mask_flags: contains flags that have to be masked (removed) from the
* master MTD flag set for the corresponding MTD partition.
* For example, to force a read-only partition, simply adding
struct nand_ecclayout *ecclayout; /* out of band layout for this partition (NAND only) */
};
+#define MTDPART_OFS_RETAIN (-3)
#define MTDPART_OFS_NXTBLK (-2)
#define MTDPART_OFS_APPEND (-1)
#define MTDPART_SIZ_FULL (0)
struct mtd_info;
+struct device_node;
+
+/**
+ * struct mtd_part_parser_data - used to pass data to MTD partition parsers.
+ * @origin: for RedBoot, start address of MTD device
+ * @of_node: for OF parsers, device node containing partitioning information
+ */
+struct mtd_part_parser_data {
+ unsigned long origin;
+ struct device_node *of_node;
+};
+
/*
* Functions dealing with the various ways of partitioning the space
struct list_head list;
struct module *owner;
const char *name;
- int (*parse_fn)(struct mtd_info *, struct mtd_partition **, unsigned long);
+ int (*parse_fn)(struct mtd_info *, struct mtd_partition **,
+ struct mtd_part_parser_data *);
};
extern int register_mtd_parser(struct mtd_part_parser *parser);
extern int deregister_mtd_parser(struct mtd_part_parser *parser);
-extern int parse_mtd_partitions(struct mtd_info *master, const char **types,
- struct mtd_partition **pparts, unsigned long origin);
-
-#define put_partition_parser(p) do { module_put((p)->owner); } while(0)
-
-struct device;
-struct device_node;
-
-#ifdef CONFIG_MTD_OF_PARTS
-int __devinit of_mtd_parse_partitions(struct device *dev,
- struct device_node *node,
- struct mtd_partition **pparts);
-#else
-static inline int of_mtd_parse_partitions(struct device *dev,
- struct device_node *node,
- struct mtd_partition **pparts)
-{
- return 0;
-}
-#endif
-
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-static inline int mtd_has_cmdlinepart(void) { return 1; }
-#else
-static inline int mtd_has_cmdlinepart(void) { return 0; }
-#endif
int mtd_is_partition(struct mtd_info *mtd);
int mtd_add_partition(struct mtd_info *master, char *name,
struct mtd_partition *parts;
};
-/*
- * Board needs to specify the exact mapping during their setup time.
- */
-void physmap_configure(unsigned long addr, unsigned long size,
- int bankwidth, void (*set_vpp)(struct map_info *, int) );
-
-/*
- * Machines that wish to do flash partition may want to call this function in
- * their setup routine.
- *
- * physmap_set_partitions(mypartitions, num_parts);
- *
- * Note that one can always override this hard-coded partition with
- * command line partition (you need to enable CONFIG_MTD_CMDLINE_PARTS).
- */
-void physmap_set_partitions(struct mtd_partition *parts, int num_parts);
-
#endif /* __LINUX_MTD_PHYSMAP__ */
#include <linux/spinlock.h>
#include <asm/byteorder.h>
+#include <asm/errno.h>
typedef u32 phandle;
typedef u32 ihandle;
*/
#ifdef CONFIG_OF_DEVICE
-#include <linux/module.h>
#include <linux/device.h>
#include <linux/mod_devicetable.h>
#include <linux/pm.h>
return 0;
}
-struct srcu_notifier_head *opp_get_notifier(struct device *dev)
+static inline struct srcu_notifier_head *opp_get_notifier(struct device *dev)
{
return ERR_PTR(-EINVAL);
}
-#endif /* CONFIG_PM */
+#endif /* CONFIG_PM_OPP */
#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_PM_OPP)
int opp_init_cpufreq_table(struct device *dev,
extern int __must_check pci_hp_change_slot_info (struct hotplug_slot *slot,
struct hotplug_slot_info *info);
-static inline int pci_hp_register(struct hotplug_slot *slot,
- struct pci_bus *pbus,
- int devnr, const char *name)
-{
- return __pci_hp_register(slot, pbus, devnr, name,
- THIS_MODULE, KBUILD_MODNAME);
-}
+/* use a define to avoid include chaining to get THIS_MODULE & friends */
+#define pci_hp_register(slot, pbus, devnr, name) \
+ __pci_hp_register(slot, pbus, devnr, name, THIS_MODULE, KBUILD_MODNAME)
/* PCI Setting Record (Type 0) */
struct hpp_type0 {
#define PCI_VENDOR_ID_AZWAVE 0x1a3b
+#define PCI_VENDOR_ID_ASMEDIA 0x1b21
+
#define PCI_VENDOR_ID_TEKRAM 0x1de1
#define PCI_DEVICE_ID_TEKRAM_DC290 0xdc29
#define PCI_VENDOR_ID_XEN 0x5853
#define PCI_DEVICE_ID_XEN_PLATFORM 0x0001
+
+#define PCI_VENDOR_ID_OCZ 0x1b85
extern void *pinctrl_dev_get_drvdata(struct pinctrl_dev *pctldev);
#else
+struct pinctrl_dev;
/* Sufficiently stupid default function when pinctrl is not in use */
static inline bool pin_is_valid(struct pinctrl_dev *pctldev, int pin)
unsigned int async_suspend:1;
bool is_prepared:1; /* Owned by the PM core */
bool is_suspended:1; /* Ditto */
+ bool ignore_children:1;
spinlock_t lock;
#ifdef CONFIG_PM_SLEEP
struct list_head entry;
atomic_t usage_count;
atomic_t child_count;
unsigned int disable_depth:3;
- unsigned int ignore_children:1;
unsigned int idle_notification:1;
unsigned int request_pending:1;
unsigned int deferred_resume:1;
#define _LINUX_PM_RUNTIME_H
#include <linux/device.h>
+#include <linux/notifier.h>
#include <linux/pm.h>
#include <linux/jiffies.h>
|| !atomic_read(&dev->power.child_count);
}
-static inline void pm_suspend_ignore_children(struct device *dev, bool enable)
-{
- dev->power.ignore_children = enable;
-}
-
static inline void pm_runtime_get_noresume(struct device *dev)
{
atomic_inc(&dev->power.usage_count);
static inline void pm_runtime_forbid(struct device *dev) {}
static inline bool pm_children_suspended(struct device *dev) { return false; }
-static inline void pm_suspend_ignore_children(struct device *dev, bool en) {}
static inline void pm_runtime_get_noresume(struct device *dev) {}
static inline void pm_runtime_put_noidle(struct device *dev) {}
static inline bool device_run_wake(struct device *dev) { return false; }
#include <linux/device.h>
#include <linux/list.h>
-#include <linux/module.h>
+struct module;
struct i2c_client;
struct spi_device;
#define __LINUX_REGULATOR_DRIVER_H_
#include <linux/device.h>
+#include <linux/notifier.h>
#include <linux/regulator/consumer.h>
struct regulator_dev;
int make_it_fail;
#endif
struct prop_local_single dirties;
+ /*
+ * when (nr_dirtied >= nr_dirtied_pause), it's time to call
+ * balance_dirty_pages() for some dirty throttling pause
+ */
+ int nr_dirtied;
+ int nr_dirtied_pause;
+
#ifdef CONFIG_LATENCYTOP
int latency_record_count;
struct latency_record latency_record[LT_SAVECOUNT];
SCIx_IRDA_REGTYPE,
SCIx_SCIFA_REGTYPE,
SCIx_SCIFB_REGTYPE,
+ SCIx_SH2_SCIF_FIFODATA_REGTYPE,
SCIx_SH3_SCIF_REGTYPE,
SCIx_SH4_SCIF_REGTYPE,
SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
irqreturn_t serio_interrupt(struct serio *serio, unsigned char data, unsigned int flags);
void __serio_register_port(struct serio *serio, struct module *owner);
-static inline void serio_register_port(struct serio *serio)
-{
- __serio_register_port(serio, THIS_MODULE);
-}
+
+/* use a define to avoid include chaining to get THIS_MODULE */
+#define serio_register_port(serio) \
+ __serio_register_port(serio, THIS_MODULE)
void serio_unregister_port(struct serio *serio);
void serio_unregister_child_port(struct serio *serio);
-int __serio_register_driver(struct serio_driver *drv, struct module *owner, const char *mod_name);
-static inline int __must_check serio_register_driver(struct serio_driver *drv)
-{
- return __serio_register_driver(drv, THIS_MODULE, KBUILD_MODNAME);
-}
+int __must_check __serio_register_driver(struct serio_driver *drv,
+ struct module *owner, const char *mod_name);
+
+/* use a define to avoid include chaining to get THIS_MODULE & friends */
+#define serio_register_driver(drv) \
+ __serio_register_driver(drv, THIS_MODULE, KBUILD_MODNAME)
+
void serio_unregister_driver(struct serio_driver *drv);
static inline int serio_write(struct serio *serio, unsigned char data)
unsigned long arch_flags;
void *priv;
- struct dentry *dentry;
struct clk_mapping *mapping;
struct cpufreq_frequency_table *freq_table;
unsigned int nr_freqs;
long clk_rate_div_range_round(struct clk *clk, unsigned int div_min,
unsigned int div_max, unsigned long rate);
+long clk_rate_mult_range_round(struct clk *clk, unsigned int mult_min,
+ unsigned int mult_max, unsigned long rate);
+
long clk_round_parent(struct clk *clk, unsigned long target,
unsigned long *best_freq, unsigned long *parent_freq,
unsigned int div_min, unsigned int div_max);
int register_pinmux(struct pinmux_info *pip);
int unregister_pinmux(struct pinmux_info *pip);
+/* helper macro for port */
+#define PORT_1(fn, pfx, sfx) fn(pfx, sfx)
+
+#define PORT_10(fn, pfx, sfx) \
+ PORT_1(fn, pfx##0, sfx), PORT_1(fn, pfx##1, sfx), \
+ PORT_1(fn, pfx##2, sfx), PORT_1(fn, pfx##3, sfx), \
+ PORT_1(fn, pfx##4, sfx), PORT_1(fn, pfx##5, sfx), \
+ PORT_1(fn, pfx##6, sfx), PORT_1(fn, pfx##7, sfx), \
+ PORT_1(fn, pfx##8, sfx), PORT_1(fn, pfx##9, sfx)
+
+#define PORT_90(fn, pfx, sfx) \
+ PORT_10(fn, pfx##1, sfx), PORT_10(fn, pfx##2, sfx), \
+ PORT_10(fn, pfx##3, sfx), PORT_10(fn, pfx##4, sfx), \
+ PORT_10(fn, pfx##5, sfx), PORT_10(fn, pfx##6, sfx), \
+ PORT_10(fn, pfx##7, sfx), PORT_10(fn, pfx##8, sfx), \
+ PORT_10(fn, pfx##9, sfx)
+
+#define _PORT_ALL(pfx, sfx) pfx##_##sfx
+#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
+#define PORT_ALL(str) CPU_ALL_PORT(_PORT_ALL, PORT, str)
+#define GPIO_PORT_ALL() CPU_ALL_PORT(_GPIO_PORT, , unused)
+#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
+
+/* helper macro for pinmux_enum_t */
+#define PORT_DATA_I(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
+
+#define PORT_DATA_I_PD(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+ PORT##nr##_IN, PORT##nr##_IN_PD)
+
+#define PORT_DATA_I_PU(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+ PORT##nr##_IN, PORT##nr##_IN_PU)
+
+#define PORT_DATA_I_PU_PD(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+ PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+#define PORT_DATA_O(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
+
+#define PORT_DATA_IO(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+ PORT##nr##_IN)
+
+#define PORT_DATA_IO_PD(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+ PORT##nr##_IN, PORT##nr##_IN_PD)
+
+#define PORT_DATA_IO_PU(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+ PORT##nr##_IN, PORT##nr##_IN_PU)
+
+#define PORT_DATA_IO_PU_PD(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+ PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+/* helper macro for top 4 bits in PORTnCR */
+#define _PCRH(in, in_pd, in_pu, out) \
+ 0, (out), (in), 0, \
+ 0, 0, 0, 0, \
+ 0, 0, (in_pd), 0, \
+ 0, 0, (in_pu), 0
+
+#define PORTCR(nr, reg) \
+ { \
+ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
+ _PCRH(PORT##nr##_IN, PORT##nr##_IN_PD, \
+ PORT##nr##_IN_PU, PORT##nr##_OUT), \
+ PORT##nr##_FN0, PORT##nr##_FN1, \
+ PORT##nr##_FN2, PORT##nr##_FN3, \
+ PORT##nr##_FN4, PORT##nr##_FN5, \
+ PORT##nr##_FN6, PORT##nr##_FN7 } \
+ }
+
#endif /* __SH_PFC_H */
#define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv)
extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner);
-static inline int ssb_driver_register(struct ssb_driver *drv)
-{
- return __ssb_driver_register(drv, THIS_MODULE);
-}
+#define ssb_driver_register(drv) \
+ __ssb_driver_register(drv, THIS_MODULE)
+
extern void ssb_driver_unregister(struct ssb_driver *drv);
#include <linux/cpu.h>
#include <linux/cpumask.h>
+#include <linux/smp.h>
#include <linux/list.h>
#include <asm/system.h>
#define SUNRPC_SVC_XPRT_H
#include <linux/sunrpc/svc.h>
-#include <linux/module.h>
+
+struct module;
struct svc_xprt_ops {
struct svc_xprt *(*xpo_create)(struct svc_serv *,
#define _SYSDEV_H_
#include <linux/kobject.h>
-#include <linux/module.h>
#include <linux/pm.h>
#include <linux/types.h>
#include <linux/list.h>
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/err.h>
#include <linux/slab.h>
+struct module;
+
struct ts_config;
#define TS_AUTOLOAD 1 /* Automatically load textsearch modules when needed */
.balance_interval = 64, \
}
+#ifndef SD_NODES_PER_DOMAIN
+#define SD_NODES_PER_DOMAIN 16
+#endif
+
#ifdef CONFIG_SCHED_BOOK
#ifndef SD_BOOK_INIT
#error Please define an appropriate SD_BOOK_INIT in include/asm/topology.h!!!
#ifndef _UIO_DRIVER_H_
#define _UIO_DRIVER_H_
-#include <linux/module.h>
#include <linux/fs.h>
#include <linux/interrupt.h>
+struct module;
struct uio_map;
/**
__uio_register_device(struct module *owner,
struct device *parent,
struct uio_info *info);
-static inline int __must_check
- uio_register_device(struct device *parent, struct uio_info *info)
-{
- return __uio_register_device(THIS_MODULE, parent, info);
-}
+
+/* use a define to avoid include chaining to get THIS_MODULE */
+#define uio_register_device(parent, info) \
+ __uio_register_device(THIS_MODULE, parent, info)
+
extern void uio_unregister_device(struct uio_info *info);
extern void uio_event_notify(struct uio_info *info);
*/
extern int usb_register_driver(struct usb_driver *, struct module *,
const char *);
-static inline int usb_register(struct usb_driver *driver)
-{
- return usb_register_driver(driver, THIS_MODULE, KBUILD_MODNAME);
-}
+
+/* use a define to avoid include chaining to get THIS_MODULE & friends */
+#define usb_register(driver) \
+ usb_register_driver(driver, THIS_MODULE, KBUILD_MODNAME)
+
extern void usb_deregister(struct usb_driver *);
extern int usb_register_device_driver(struct usb_device_driver *,
#include <linux/wait.h>
#include <linux/workqueue.h>
#include <linux/uwb/spec.h>
+#include <asm/page.h>
struct uwb_dev;
struct uwb_beca_e;
* umc_driver_register - register a UMC capabiltity driver.
* @umc_drv: pointer to the driver.
*/
-static inline int __must_check umc_driver_register(struct umc_driver *umc_drv)
-{
- return __umc_driver_register(umc_drv, THIS_MODULE, KBUILD_MODNAME);
-}
+#define umc_driver_register(umc_drv) \
+ __umc_driver_register(umc_drv, THIS_MODULE, KBUILD_MODNAME)
+
void umc_driver_unregister(struct umc_driver *umc_drv);
/*
#include <generated/utsrelease.h>
-#include <linux/module.h>
/* Simply sanity version stamp for modules. */
#ifdef CONFIG_SMP
#define __VLYNQ_H__
#include <linux/device.h>
-#include <linux/module.h>
#include <linux/types.h>
+struct module;
+
#define VLYNQ_NUM_IRQS 32
struct vlynq_mapping {
#endif
/* Allocate/destroy a 'vmalloc' VM area. */
-extern struct vm_struct *alloc_vm_area(size_t size);
+extern struct vm_struct *alloc_vm_area(size_t size, pte_t **ptes);
extern void free_vm_area(struct vm_struct *area);
/* for /dev/kmem */
WB_SYNC_ALL, /* Wait on every mapping */
};
+/*
+ * why some writeback work was initiated
+ */
+enum wb_reason {
+ WB_REASON_BACKGROUND,
+ WB_REASON_TRY_TO_FREE_PAGES,
+ WB_REASON_SYNC,
+ WB_REASON_PERIODIC,
+ WB_REASON_LAPTOP_TIMER,
+ WB_REASON_FREE_MORE_MEM,
+ WB_REASON_FS_FREE_SPACE,
+ WB_REASON_FORKER_THREAD,
+
+ WB_REASON_MAX,
+};
+extern const char *wb_reason_name[];
+
/*
* A control structure which tells the writeback code what to do. These are
* always on the stack, and hence need no locking. They are always initialised
*/
struct bdi_writeback;
int inode_wait(void *);
-void writeback_inodes_sb(struct super_block *);
-void writeback_inodes_sb_nr(struct super_block *, unsigned long nr);
-int writeback_inodes_sb_if_idle(struct super_block *);
-int writeback_inodes_sb_nr_if_idle(struct super_block *, unsigned long nr);
+void writeback_inodes_sb(struct super_block *, enum wb_reason reason);
+void writeback_inodes_sb_nr(struct super_block *, unsigned long nr,
+ enum wb_reason reason);
+int writeback_inodes_sb_if_idle(struct super_block *, enum wb_reason reason);
+int writeback_inodes_sb_nr_if_idle(struct super_block *, unsigned long nr,
+ enum wb_reason reason);
void sync_inodes_sb(struct super_block *);
-long writeback_inodes_wb(struct bdi_writeback *wb, long nr_pages);
+long writeback_inodes_wb(struct bdi_writeback *wb, long nr_pages,
+ enum wb_reason reason);
long wb_do_writeback(struct bdi_writeback *wb, int force_wait);
-void wakeup_flusher_threads(long nr_pages);
+void wakeup_flusher_threads(long nr_pages, enum wb_reason reason);
/* writeback.h requires fs.h; it, too, is not included from here. */
static inline void wait_on_inode(struct inode *inode)
void __bdi_update_bandwidth(struct backing_dev_info *bdi,
unsigned long thresh,
+ unsigned long bg_thresh,
unsigned long dirty,
unsigned long bdi_thresh,
unsigned long bdi_dirty,
#ifndef __SAA7146__
#define __SAA7146__
-#include <linux/module.h> /* for module-version */
#include <linux/delay.h> /* for delay-stuff */
#include <linux/slab.h> /* for kmalloc/kfree */
#include <linux/pci.h> /* for pci-config-stuff, vendor ids etc. */
#define SAA7146_ISR_CLEAR(x,y) \
saa7146_write(x, ISR, (y));
+struct module;
+
struct saa7146_dev;
struct saa7146_extension;
struct saa7146_vv;
#ifndef V4L2_INT_DEVICE_H
#define V4L2_INT_DEVICE_H
-#include <linux/module.h>
#include <media/v4l2-common.h>
#define V4L2NAMESIZE 32
v4l2_int_type_slave
};
+struct module;
+
struct v4l2_int_device;
struct v4l2_int_master {
__u64 usr_ptr;
};
+/**
+ * MTD operation modes
+ *
+ * @MTD_OPS_PLACE_OOB: OOB data are placed at the given offset (default)
+ * @MTD_OPS_AUTO_OOB: OOB data are automatically placed at the free areas
+ * which are defined by the internal ecclayout
+ * @MTD_OPS_RAW: data are transferred as-is, with no error correction;
+ * this mode implies %MTD_OPS_PLACE_OOB
+ *
+ * These modes can be passed to ioctl(MEMWRITE) and are also used internally.
+ * See notes on "MTD file modes" for discussion on %MTD_OPS_RAW vs.
+ * %MTD_FILE_MODE_RAW.
+ */
+enum {
+ MTD_OPS_PLACE_OOB = 0,
+ MTD_OPS_AUTO_OOB = 1,
+ MTD_OPS_RAW = 2,
+};
+
+/**
+ * struct mtd_write_req - data structure for requesting a write operation
+ *
+ * @start: start address
+ * @len: length of data buffer
+ * @ooblen: length of OOB buffer
+ * @usr_data: user-provided data buffer
+ * @usr_oob: user-provided OOB buffer
+ * @mode: MTD mode (see "MTD operation modes")
+ * @padding: reserved, must be set to 0
+ *
+ * This structure supports ioctl(MEMWRITE) operations, allowing data and/or OOB
+ * writes in various modes. To write to OOB-only, set @usr_data == NULL, and to
+ * write data-only, set @usr_oob == NULL. However, setting both @usr_data and
+ * @usr_oob to NULL is not allowed.
+ */
+struct mtd_write_req {
+ __u64 start;
+ __u64 len;
+ __u64 ooblen;
+ __u64 usr_data;
+ __u64 usr_oob;
+ __u8 mode;
+ __u8 padding[7];
+};
+
#define MTD_ABSENT 0
#define MTD_RAM 1
#define MTD_ROM 2
#define MTD_NO_ERASE 0x1000 /* No erase necessary */
#define MTD_POWERUP_LOCK 0x2000 /* Always locked after reset */
-// Some common devices / combinations of capabilities
+/* Some common devices / combinations of capabilities */
#define MTD_CAP_ROM 0
#define MTD_CAP_RAM (MTD_WRITEABLE | MTD_BIT_WRITEABLE | MTD_NO_ERASE)
#define MTD_CAP_NORFLASH (MTD_WRITEABLE | MTD_BIT_WRITEABLE)
#define MTD_CAP_NANDFLASH (MTD_WRITEABLE)
-/* ECC byte placement */
+/* Obsolete ECC byte placement modes (used with obsolete MEMGETOOBSEL) */
#define MTD_NANDECC_OFF 0 // Switch off ECC (Not recommended)
#define MTD_NANDECC_PLACE 1 // Use the given placement in the structure (YAFFS1 legacy mode)
#define MTD_NANDECC_AUTOPLACE 2 // Use the default placement scheme
struct mtd_info_user {
__u8 type;
__u32 flags;
- __u32 size; // Total size of the MTD
+ __u32 size; /* Total size of the MTD */
__u32 erasesize;
__u32 writesize;
- __u32 oobsize; // Amount of OOB data per block (e.g. 16)
- /* The below two fields are obsolete and broken, do not use them
- * (TODO: remove at some point) */
- __u32 ecctype;
- __u32 eccsize;
+ __u32 oobsize; /* Amount of OOB data per block (e.g. 16) */
+ __u64 padding; /* Old obsolete field; do not use */
};
struct region_info_user {
__u32 offset; /* At which this region starts,
- * from the beginning of the MTD */
- __u32 erasesize; /* For this region */
- __u32 numblocks; /* Number of blocks in this region */
+ * from the beginning of the MTD */
+ __u32 erasesize; /* For this region */
+ __u32 numblocks; /* Number of blocks in this region */
__u32 regionindex;
};
__u32 locked;
};
+/*
+ * Note, the following ioctl existed in the past and was removed:
+ * #define MEMSETOOBSEL _IOW('M', 9, struct nand_oobinfo)
+ * Try to avoid adding a new ioctl with the same ioctl number.
+ */
+
+/* Get basic MTD characteristics info (better to use sysfs) */
#define MEMGETINFO _IOR('M', 1, struct mtd_info_user)
+/* Erase segment of MTD */
#define MEMERASE _IOW('M', 2, struct erase_info_user)
+/* Write out-of-band data from MTD */
#define MEMWRITEOOB _IOWR('M', 3, struct mtd_oob_buf)
+/* Read out-of-band data from MTD */
#define MEMREADOOB _IOWR('M', 4, struct mtd_oob_buf)
+/* Lock a chip (for MTD that supports it) */
#define MEMLOCK _IOW('M', 5, struct erase_info_user)
+/* Unlock a chip (for MTD that supports it) */
#define MEMUNLOCK _IOW('M', 6, struct erase_info_user)
+/* Get the number of different erase regions */
#define MEMGETREGIONCOUNT _IOR('M', 7, int)
+/* Get information about the erase region for a specific index */
#define MEMGETREGIONINFO _IOWR('M', 8, struct region_info_user)
-#define MEMSETOOBSEL _IOW('M', 9, struct nand_oobinfo)
+/* Get info about OOB modes (e.g., RAW, PLACE, AUTO) - legacy interface */
#define MEMGETOOBSEL _IOR('M', 10, struct nand_oobinfo)
+/* Check if an eraseblock is bad */
#define MEMGETBADBLOCK _IOW('M', 11, __kernel_loff_t)
+/* Mark an eraseblock as bad */
#define MEMSETBADBLOCK _IOW('M', 12, __kernel_loff_t)
+/* Set OTP (One-Time Programmable) mode (factory vs. user) */
#define OTPSELECT _IOR('M', 13, int)
+/* Get number of OTP (One-Time Programmable) regions */
#define OTPGETREGIONCOUNT _IOW('M', 14, int)
+/* Get all OTP (One-Time Programmable) info about MTD */
#define OTPGETREGIONINFO _IOW('M', 15, struct otp_info)
+/* Lock a given range of user data (must be in mode %MTD_FILE_MODE_OTP_USER) */
#define OTPLOCK _IOR('M', 16, struct otp_info)
+/* Get ECC layout (deprecated) */
#define ECCGETLAYOUT _IOR('M', 17, struct nand_ecclayout_user)
+/* Get statistics about corrected/uncorrected errors */
#define ECCGETSTATS _IOR('M', 18, struct mtd_ecc_stats)
+/* Set MTD mode on a per-file-descriptor basis (see "MTD file modes") */
#define MTDFILEMODE _IO('M', 19)
+/* Erase segment of MTD (supports 64-bit address) */
#define MEMERASE64 _IOW('M', 20, struct erase_info_user64)
+/* Write data to OOB (64-bit version) */
#define MEMWRITEOOB64 _IOWR('M', 21, struct mtd_oob_buf64)
+/* Read data from OOB (64-bit version) */
#define MEMREADOOB64 _IOWR('M', 22, struct mtd_oob_buf64)
+/* Check if chip is locked (for MTD that supports it) */
#define MEMISLOCKED _IOR('M', 23, struct erase_info_user)
+/*
+ * Most generic write interface; can write in-band and/or out-of-band in various
+ * modes (see "struct mtd_write_req")
+ */
+#define MEMWRITE _IOWR('M', 24, struct mtd_write_req)
/*
* Obsolete legacy interface. Keep it in order not to break userspace
};
/*
- * Read/write file modes for access to MTD
+ * MTD file modes - for read/write access to MTD
+ *
+ * @MTD_FILE_MODE_NORMAL: OTP disabled, ECC enabled
+ * @MTD_FILE_MODE_OTP_FACTORY: OTP enabled in factory mode
+ * @MTD_FILE_MODE_OTP_USER: OTP enabled in user mode
+ * @MTD_FILE_MODE_RAW: OTP disabled, ECC disabled
+ *
+ * These modes can be set via ioctl(MTDFILEMODE). The mode mode will be retained
+ * separately for each open file descriptor.
+ *
+ * Note: %MTD_FILE_MODE_RAW provides the same functionality as %MTD_OPS_RAW -
+ * raw access to the flash, without error correction or autoplacement schemes.
+ * Wherever possible, the MTD_OPS_* mode will override the MTD_FILE_MODE_* mode
+ * (e.g., when using ioctl(MEMWRITE)), but in some cases, the MTD_FILE_MODE is
+ * used out of necessity (e.g., `write()', ioctl(MEMWRITEOOB64)).
*/
enum mtd_file_modes {
- MTD_MODE_NORMAL = MTD_OTP_OFF,
- MTD_MODE_OTP_FACTORY = MTD_OTP_FACTORY,
- MTD_MODE_OTP_USER = MTD_OTP_USER,
- MTD_MODE_RAW,
+ MTD_FILE_MODE_NORMAL = MTD_OTP_OFF,
+ MTD_FILE_MODE_OTP_FACTORY = MTD_OTP_FACTORY,
+ MTD_FILE_MODE_OTP_USER = MTD_OTP_USER,
+ MTD_FILE_MODE_RAW,
};
#endif /* __MTD_ABI_H__ */
d->destruct(d);
}
-static inline void hci_dev_put(struct hci_dev *d)
-{
- __hci_dev_put(d);
- module_put(d->owner);
-}
+/*
+ * hci_dev_put and hci_dev_hold are macros to avoid dragging all the
+ * overhead of all the modular infrastructure into this header.
+ */
+#define hci_dev_put(d) \
+do { \
+ __hci_dev_put(d); \
+ module_put(d->owner); \
+} while (0)
static inline struct hci_dev *__hci_dev_hold(struct hci_dev *d)
{
return d;
}
-static inline struct hci_dev *hci_dev_hold(struct hci_dev *d)
-{
- if (try_module_get(d->owner))
- return __hci_dev_hold(d);
- return NULL;
-}
+#define hci_dev_hold(d) \
+({ \
+ try_module_get(d->owner) ? __hci_dev_hold(d) : NULL; \
+})
#define hci_dev_lock(d) spin_lock(&d->lock)
#define hci_dev_unlock(d) spin_unlock(&d->lock)
#define L2CAP_DEFAULT_ACK_TO 200
#define L2CAP_LE_DEFAULT_MTU 23
-#define L2CAP_CONN_TIMEOUT (40000) /* 40 seconds */
-#define L2CAP_INFO_TIMEOUT (4000) /* 4 seconds */
+#define L2CAP_DISC_TIMEOUT (100)
+#define L2CAP_DISC_REJ_TIMEOUT (5000) /* 5 seconds */
+#define L2CAP_ENC_TIMEOUT (5000) /* 5 seconds */
+#define L2CAP_CONN_TIMEOUT (40000) /* 40 seconds */
+#define L2CAP_INFO_TIMEOUT (4000) /* 4 seconds */
/* L2CAP socket address */
struct sockaddr_l2 {
#define RFCOMM_AUTH_ACCEPT 6
#define RFCOMM_AUTH_REJECT 7
#define RFCOMM_DEFER_SETUP 8
+#define RFCOMM_ENC_DROP 9
/* Scheduling flags and events */
#define RFCOMM_SCHED_WAKEUP 31
* as the AC bitmap in the QoS info field
* @max_sp: max Service Period. same format as the MAX_SP in the
* QoS info field (but already shifted down)
+ * @sta_modify_mask: bitmap indicating which parameters changed
+ * (for those that don't have a natural "no change" value),
+ * see &enum station_parameters_apply_mask
*/
struct station_parameters {
u8 *supported_rates;
* user space MLME/SME implementation. The information is provided for
* the cfg80211_new_sta() calls to notify user space of the IEs.
* @assoc_req_ies_len: Length of assoc_req_ies buffer in octets.
+ * @sta_flags: station flags mask & values
*/
struct station_info {
u32 filled;
#include <linux/kmemcheck.h>
#include <linux/list.h>
-#include <linux/module.h>
#include <linux/timer.h>
#include <linux/types.h>
#include <linux/workqueue.h>
struct ip_vs_pe *ip_vs_pe_getbyname(const char *name);
struct ip_vs_pe *__ip_vs_pe_getbyname(const char *pe_name);
-static inline void ip_vs_pe_get(const struct ip_vs_pe *pe)
-{
- if (pe && pe->module)
+/*
+ * Use a #define to avoid all of module.h just for these trivial ops
+ */
+#define ip_vs_pe_get(pe) \
+ if (pe && pe->module) \
__module_get(pe->module);
-}
-static inline void ip_vs_pe_put(const struct ip_vs_pe *pe)
-{
- if (pe && pe->module)
+#define ip_vs_pe_put(pe) \
+ if (pe && pe->module) \
module_put(pe->module);
-}
/*
* IPVS protocol functions (from ip_vs_proto.c)
#include <linux/types.h>
#include <linux/list.h>
-#include <linux/module.h>
#include <linux/atomic.h>
#include <linux/if.h>
#include <linux/skbuff.h>
IEEE80211_CRYPTO_TKIP_COUNTERMEASURES = (1 << 0),
};
+struct module;
+
struct lib80211_crypto_ops {
const char *name;
struct list_head list;
return i;
/* warn when we cannot find a rate. */
- WARN_ON(1);
+ WARN_ON_ONCE(1);
+ /* and return 0 (the lowest index) */
return 0;
}
return skb->dev && skb->skb_iif && skb->dev->flags & IFF_LOOPBACK;
}
+struct kernel_param;
+
extern int nf_conntrack_set_hashsize(const char *val, struct kernel_param *kp);
extern unsigned int nf_conntrack_htable_size;
extern unsigned int nf_conntrack_max;
* NLA_NUL_STRING Maximum length of string (excluding NUL)
* NLA_FLAG Unused
* NLA_BINARY Maximum length of attribute payload
- * NLA_NESTED_COMPAT Exact length of structure payload
- * All other Exact length of attribute payload
+ * NLA_NESTED Don't use `len' field -- length verification is
+ * done by checking len of nested header (or empty)
+ * NLA_NESTED_COMPAT Minimum length of structure payload
+ * NLA_U8, NLA_U16,
+ * NLA_U32, NLA_U64,
+ * NLA_MSECS Leaving the length field zero will verify the
+ * given type fits, using it verifies minimum length
+ * just like "All other"
+ * All other Minimum length of attribute payload
*
* Example:
* static const struct nla_policy my_policy[ATTR_MAX+1] = {
#include <linux/netdevice.h>
#include <linux/types.h>
#include <linux/rcupdate.h>
-#include <linux/module.h>
#include <linux/pkt_sched.h>
#include <linux/pkt_cls.h>
#include <net/gen_stats.h>
#include <linux/list_nulls.h>
#include <linux/timer.h>
#include <linux/cache.h>
-#include <linux/module.h>
#include <linux/lockdep.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h> /* struct sk_buff */
struct timewait_sock_ops;
struct inet_hashinfo;
struct raw_hashinfo;
+struct module;
/* Networking protocol blocks we attach to sockets.
* socket layer -> transport layer interface
*
*/
-#include <linux/module.h>
#include <linux/sched.h> /* wake_up() */
#include <linux/mutex.h> /* struct mutex */
#include <linux/rwsem.h> /* struct rw_semaphore */
#ifdef CONFIG_PCI
struct pci_dev;
#endif
+struct module;
/* device allocation stuff */
TRANSPORT_PROCESS_TMR = 9,
TRANSPORT_ISTATE_PROCESSING = 11,
TRANSPORT_NEW_CMD_MAP = 16,
- TRANSPORT_FREE_CMD_INTR = 17,
TRANSPORT_COMPLETE_QF_WP = 18,
TRANSPORT_COMPLETE_QF_OK = 19,
};
SCF_DELAYED_CMD_FROM_SAM_ATTR = 0x00080000,
SCF_UNUSED = 0x00100000,
SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC = 0x00400000,
- SCF_EMULATE_CDB_ASYNC = 0x01000000,
};
/* struct se_dev_entry->lun_flags and struct se_lun->lun_access */
enum transport_state_table t_state;
/* Transport specific error status */
int transport_error_status;
+ /* Used to signal cmd->se_tfo->check_release_cmd() usage per cmd */
+ int check_release:1;
+ int cmd_wait_set:1;
/* See se_cmd_flags_table */
u32 se_cmd_flags;
u32 se_ordered_id;
struct se_session *se_sess;
struct se_tmr_req *se_tmr_req;
struct list_head se_queue_node;
+ struct list_head se_cmd_list;
+ struct completion cmd_wait_comp;
struct target_core_fabric_ops *se_tfo;
- int (*transport_emulate_cdb)(struct se_cmd *);
+ int (*execute_task)(struct se_task *);
void (*transport_complete_callback)(struct se_cmd *);
unsigned char *t_task_cdb;
} ____cacheline_aligned;
struct se_session {
+ int sess_tearing_down:1;
u64 sess_bin_isid;
struct se_node_acl *se_node_acl;
struct se_portal_group *se_tpg;
void *fabric_sess_ptr;
struct list_head sess_list;
struct list_head sess_acl_list;
+ struct list_head sess_cmd_list;
+ struct list_head sess_wait_list;
+ spinlock_t sess_cmd_lock;
} ____cacheline_aligned;
struct se_device;
struct se_lun *);
extern void core_dev_unexport(struct se_device *, struct se_portal_group *,
struct se_lun *);
-extern int transport_core_report_lun_response(struct se_cmd *);
+extern int target_report_luns(struct se_task *);
extern void se_release_device_for_hba(struct se_device *);
extern void se_release_vpd_for_dev(struct se_device *);
extern void se_clear_dev_ports(struct se_device *);
int (*new_cmd_map)(struct se_cmd *);
/*
* Optional to release struct se_cmd and fabric dependent allocated
- * I/O descriptor in transport_cmd_check_stop()
+ * I/O descriptor in transport_cmd_check_stop().
+ *
+ * Returning 1 will signal a descriptor has been released.
+ * Returning 0 will signal a descriptor has not been released.
*/
- void (*check_stop_free)(struct se_cmd *);
+ int (*check_stop_free)(struct se_cmd *);
+ /*
+ * Optional check for active I/O shutdown
+ */
+ int (*check_release_cmd)(struct se_cmd *);
void (*release_cmd)(struct se_cmd *);
/*
* Called with spin_lock_bh(struct se_portal_group->session_lock held.
extern int transport_generic_handle_data(struct se_cmd *);
extern void transport_new_cmd_failure(struct se_cmd *);
extern int transport_generic_handle_tmr(struct se_cmd *);
-extern void transport_generic_free_cmd_intr(struct se_cmd *);
extern bool target_stop_task(struct se_task *task, unsigned long *flags);
extern int transport_generic_map_mem_to_cmd(struct se_cmd *cmd, struct scatterlist *, u32,
struct scatterlist *, u32);
extern int transport_clear_lun_from_sessions(struct se_lun *);
-extern void transport_wait_for_tasks(struct se_cmd *);
+extern bool transport_wait_for_tasks(struct se_cmd *);
extern int transport_check_aborted_status(struct se_cmd *, int);
extern int transport_send_check_condition_and_sense(struct se_cmd *, u8, int);
extern void transport_send_task_abort(struct se_cmd *);
extern void transport_release_cmd(struct se_cmd *);
extern void transport_generic_free_cmd(struct se_cmd *, int);
+extern void target_get_sess_cmd(struct se_session *, struct se_cmd *);
+extern int target_put_sess_cmd(struct se_session *, struct se_cmd *);
+extern void target_splice_sess_cmd_list(struct se_session *);
+extern void target_wait_for_sess_cmds(struct se_session *, int);
extern void transport_generic_wait_for_cmds(struct se_cmd *, int);
extern void transport_do_task_sg_chain(struct se_cmd *);
extern void transport_generic_process_write(struct se_cmd *);
#undef CREATE_TRACE_POINTS
#include <linux/stringify.h>
-/*
- * module.h includes tracepoints, and because ftrace.h
- * pulls in module.h:
- * trace/ftrace.h -> linux/ftrace_event.h -> linux/perf_event.h ->
- * linux/ftrace.h -> linux/module.h
- * we must include module.h here before we play with any of
- * the TRACE_EVENT() macros, otherwise the tracepoints included
- * by module.h may break the build.
- */
-#include <linux/module.h>
#undef TRACE_EVENT
#define TRACE_EVENT(name, proto, args, tstruct, assign, print) \
/*
* Because linux/module.h has tracepoints in the header, and ftrace.h
- * eventually includes this file, define_trace.h includes linux/module.h
+ * used to include this file, define_trace.h includes linux/module.h
* But we do not want the module.h to override the TRACE_SYSTEM macro
* variable that define_trace.h is processing, so we only set it
* when module events are being processed, which would happen when
__field(int, for_kupdate)
__field(int, range_cyclic)
__field(int, for_background)
+ __field(int, reason)
),
TP_fast_assign(
strncpy(__entry->name, dev_name(bdi->dev), 32);
__entry->for_kupdate = work->for_kupdate;
__entry->range_cyclic = work->range_cyclic;
__entry->for_background = work->for_background;
+ __entry->reason = work->reason;
),
TP_printk("bdi %s: sb_dev %d:%d nr_pages=%ld sync_mode=%d "
- "kupdate=%d range_cyclic=%d background=%d",
+ "kupdate=%d range_cyclic=%d background=%d reason=%s",
__entry->name,
MAJOR(__entry->sb_dev), MINOR(__entry->sb_dev),
__entry->nr_pages,
__entry->sync_mode,
__entry->for_kupdate,
__entry->range_cyclic,
- __entry->for_background
+ __entry->for_background,
+ wb_reason_name[__entry->reason]
)
);
#define DEFINE_WRITEBACK_WORK_EVENT(name) \
DEFINE_WRITEBACK_EVENT(writeback_bdi_unregister);
DEFINE_WRITEBACK_EVENT(writeback_thread_start);
DEFINE_WRITEBACK_EVENT(writeback_thread_stop);
-DEFINE_WRITEBACK_EVENT(balance_dirty_start);
-DEFINE_WRITEBACK_EVENT(balance_dirty_wait);
-
-TRACE_EVENT(balance_dirty_written,
-
- TP_PROTO(struct backing_dev_info *bdi, int written),
-
- TP_ARGS(bdi, written),
-
- TP_STRUCT__entry(
- __array(char, name, 32)
- __field(int, written)
- ),
-
- TP_fast_assign(
- strncpy(__entry->name, dev_name(bdi->dev), 32);
- __entry->written = written;
- ),
-
- TP_printk("bdi %s written %d",
- __entry->name,
- __entry->written
- )
-);
DECLARE_EVENT_CLASS(wbc_class,
TP_PROTO(struct writeback_control *wbc, struct backing_dev_info *bdi),
TRACE_EVENT(writeback_queue_io,
TP_PROTO(struct bdi_writeback *wb,
- unsigned long *older_than_this,
+ struct wb_writeback_work *work,
int moved),
- TP_ARGS(wb, older_than_this, moved),
+ TP_ARGS(wb, work, moved),
TP_STRUCT__entry(
__array(char, name, 32)
__field(unsigned long, older)
__field(long, age)
__field(int, moved)
+ __field(int, reason)
),
TP_fast_assign(
+ unsigned long *older_than_this = work->older_than_this;
strncpy(__entry->name, dev_name(wb->bdi->dev), 32);
__entry->older = older_than_this ? *older_than_this : 0;
__entry->age = older_than_this ?
(jiffies - *older_than_this) * 1000 / HZ : -1;
__entry->moved = moved;
+ __entry->reason = work->reason;
),
- TP_printk("bdi %s: older=%lu age=%ld enqueue=%d",
+ TP_printk("bdi %s: older=%lu age=%ld enqueue=%d reason=%s",
__entry->name,
__entry->older, /* older_than_this in jiffies */
__entry->age, /* older_than_this in relative milliseconds */
- __entry->moved)
+ __entry->moved,
+ wb_reason_name[__entry->reason])
);
TRACE_EVENT(global_dirty_state,
)
);
+#define KBps(x) ((x) << (PAGE_SHIFT - 10))
+
+TRACE_EVENT(bdi_dirty_ratelimit,
+
+ TP_PROTO(struct backing_dev_info *bdi,
+ unsigned long dirty_rate,
+ unsigned long task_ratelimit),
+
+ TP_ARGS(bdi, dirty_rate, task_ratelimit),
+
+ TP_STRUCT__entry(
+ __array(char, bdi, 32)
+ __field(unsigned long, write_bw)
+ __field(unsigned long, avg_write_bw)
+ __field(unsigned long, dirty_rate)
+ __field(unsigned long, dirty_ratelimit)
+ __field(unsigned long, task_ratelimit)
+ __field(unsigned long, balanced_dirty_ratelimit)
+ ),
+
+ TP_fast_assign(
+ strlcpy(__entry->bdi, dev_name(bdi->dev), 32);
+ __entry->write_bw = KBps(bdi->write_bandwidth);
+ __entry->avg_write_bw = KBps(bdi->avg_write_bandwidth);
+ __entry->dirty_rate = KBps(dirty_rate);
+ __entry->dirty_ratelimit = KBps(bdi->dirty_ratelimit);
+ __entry->task_ratelimit = KBps(task_ratelimit);
+ __entry->balanced_dirty_ratelimit =
+ KBps(bdi->balanced_dirty_ratelimit);
+ ),
+
+ TP_printk("bdi %s: "
+ "write_bw=%lu awrite_bw=%lu dirty_rate=%lu "
+ "dirty_ratelimit=%lu task_ratelimit=%lu "
+ "balanced_dirty_ratelimit=%lu",
+ __entry->bdi,
+ __entry->write_bw, /* write bandwidth */
+ __entry->avg_write_bw, /* avg write bandwidth */
+ __entry->dirty_rate, /* bdi dirty rate */
+ __entry->dirty_ratelimit, /* base ratelimit */
+ __entry->task_ratelimit, /* ratelimit with position control */
+ __entry->balanced_dirty_ratelimit /* the balanced ratelimit */
+ )
+);
+
+TRACE_EVENT(balance_dirty_pages,
+
+ TP_PROTO(struct backing_dev_info *bdi,
+ unsigned long thresh,
+ unsigned long bg_thresh,
+ unsigned long dirty,
+ unsigned long bdi_thresh,
+ unsigned long bdi_dirty,
+ unsigned long dirty_ratelimit,
+ unsigned long task_ratelimit,
+ unsigned long dirtied,
+ long pause,
+ unsigned long start_time),
+
+ TP_ARGS(bdi, thresh, bg_thresh, dirty, bdi_thresh, bdi_dirty,
+ dirty_ratelimit, task_ratelimit,
+ dirtied, pause, start_time),
+
+ TP_STRUCT__entry(
+ __array( char, bdi, 32)
+ __field(unsigned long, limit)
+ __field(unsigned long, setpoint)
+ __field(unsigned long, dirty)
+ __field(unsigned long, bdi_setpoint)
+ __field(unsigned long, bdi_dirty)
+ __field(unsigned long, dirty_ratelimit)
+ __field(unsigned long, task_ratelimit)
+ __field(unsigned int, dirtied)
+ __field(unsigned int, dirtied_pause)
+ __field(unsigned long, paused)
+ __field( long, pause)
+ ),
+
+ TP_fast_assign(
+ unsigned long freerun = (thresh + bg_thresh) / 2;
+ strlcpy(__entry->bdi, dev_name(bdi->dev), 32);
+
+ __entry->limit = global_dirty_limit;
+ __entry->setpoint = (global_dirty_limit + freerun) / 2;
+ __entry->dirty = dirty;
+ __entry->bdi_setpoint = __entry->setpoint *
+ bdi_thresh / (thresh + 1);
+ __entry->bdi_dirty = bdi_dirty;
+ __entry->dirty_ratelimit = KBps(dirty_ratelimit);
+ __entry->task_ratelimit = KBps(task_ratelimit);
+ __entry->dirtied = dirtied;
+ __entry->dirtied_pause = current->nr_dirtied_pause;
+ __entry->pause = pause * 1000 / HZ;
+ __entry->paused = (jiffies - start_time) * 1000 / HZ;
+ ),
+
+
+ TP_printk("bdi %s: "
+ "limit=%lu setpoint=%lu dirty=%lu "
+ "bdi_setpoint=%lu bdi_dirty=%lu "
+ "dirty_ratelimit=%lu task_ratelimit=%lu "
+ "dirtied=%u dirtied_pause=%u "
+ "paused=%lu pause=%ld",
+ __entry->bdi,
+ __entry->limit,
+ __entry->setpoint,
+ __entry->dirty,
+ __entry->bdi_setpoint,
+ __entry->bdi_dirty,
+ __entry->dirty_ratelimit,
+ __entry->task_ratelimit,
+ __entry->dirtied,
+ __entry->dirtied_pause,
+ __entry->paused, /* ms */
+ __entry->pause /* ms */
+ )
+);
+
DECLARE_EVENT_CLASS(writeback_congest_waited_template,
TP_PROTO(unsigned int usec_timeout, unsigned int usec_delayed),
#include <xen/interface/grant_table.h>
#include <asm/xen/hypervisor.h>
-#include <asm/xen/grant_table.h>
#include <xen/features.h>
--- /dev/null
+/******************************************************************************
+ * platform.h
+ *
+ * Hardware platform operations. Intended for use by domain-0 kernel.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Copyright (c) 2002-2006, K Fraser
+ */
+
+#ifndef __XEN_PUBLIC_PLATFORM_H__
+#define __XEN_PUBLIC_PLATFORM_H__
+
+#include "xen.h"
+
+#define XENPF_INTERFACE_VERSION 0x03000001
+
+/*
+ * Set clock such that it would read <secs,nsecs> after 00:00:00 UTC,
+ * 1 January, 1970 if the current system time was <system_time>.
+ */
+#define XENPF_settime 17
+struct xenpf_settime {
+ /* IN variables. */
+ uint32_t secs;
+ uint32_t nsecs;
+ uint64_t system_time;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_settime_t);
+
+/*
+ * Request memory range (@mfn, @mfn+@nr_mfns-1) to have type @type.
+ * On x86, @type is an architecture-defined MTRR memory type.
+ * On success, returns the MTRR that was used (@reg) and a handle that can
+ * be passed to XENPF_DEL_MEMTYPE to accurately tear down the new setting.
+ * (x86-specific).
+ */
+#define XENPF_add_memtype 31
+struct xenpf_add_memtype {
+ /* IN variables. */
+ unsigned long mfn;
+ uint64_t nr_mfns;
+ uint32_t type;
+ /* OUT variables. */
+ uint32_t handle;
+ uint32_t reg;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_add_memtype_t);
+
+/*
+ * Tear down an existing memory-range type. If @handle is remembered then it
+ * should be passed in to accurately tear down the correct setting (in case
+ * of overlapping memory regions with differing types). If it is not known
+ * then @handle should be set to zero. In all cases @reg must be set.
+ * (x86-specific).
+ */
+#define XENPF_del_memtype 32
+struct xenpf_del_memtype {
+ /* IN variables. */
+ uint32_t handle;
+ uint32_t reg;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_del_memtype_t);
+
+/* Read current type of an MTRR (x86-specific). */
+#define XENPF_read_memtype 33
+struct xenpf_read_memtype {
+ /* IN variables. */
+ uint32_t reg;
+ /* OUT variables. */
+ unsigned long mfn;
+ uint64_t nr_mfns;
+ uint32_t type;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_read_memtype_t);
+
+#define XENPF_microcode_update 35
+struct xenpf_microcode_update {
+ /* IN variables. */
+ GUEST_HANDLE(void) data; /* Pointer to microcode data */
+ uint32_t length; /* Length of microcode data. */
+};
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_microcode_update_t);
+
+#define XENPF_platform_quirk 39
+#define QUIRK_NOIRQBALANCING 1 /* Do not restrict IO-APIC RTE targets */
+#define QUIRK_IOAPIC_BAD_REGSEL 2 /* IO-APIC REGSEL forgets its value */
+#define QUIRK_IOAPIC_GOOD_REGSEL 3 /* IO-APIC REGSEL behaves properly */
+struct xenpf_platform_quirk {
+ /* IN variables. */
+ uint32_t quirk_id;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_platform_quirk_t);
+
+#define XENPF_firmware_info 50
+#define XEN_FW_DISK_INFO 1 /* from int 13 AH=08/41/48 */
+#define XEN_FW_DISK_MBR_SIGNATURE 2 /* from MBR offset 0x1b8 */
+#define XEN_FW_VBEDDC_INFO 3 /* from int 10 AX=4f15 */
+struct xenpf_firmware_info {
+ /* IN variables. */
+ uint32_t type;
+ uint32_t index;
+ /* OUT variables. */
+ union {
+ struct {
+ /* Int13, Fn48: Check Extensions Present. */
+ uint8_t device; /* %dl: bios device number */
+ uint8_t version; /* %ah: major version */
+ uint16_t interface_support; /* %cx: support bitmap */
+ /* Int13, Fn08: Legacy Get Device Parameters. */
+ uint16_t legacy_max_cylinder; /* %cl[7:6]:%ch: max cyl # */
+ uint8_t legacy_max_head; /* %dh: max head # */
+ uint8_t legacy_sectors_per_track; /* %cl[5:0]: max sector # */
+ /* Int13, Fn41: Get Device Parameters (as filled into %ds:%esi). */
+ /* NB. First uint16_t of buffer must be set to buffer size. */
+ GUEST_HANDLE(void) edd_params;
+ } disk_info; /* XEN_FW_DISK_INFO */
+ struct {
+ uint8_t device; /* bios device number */
+ uint32_t mbr_signature; /* offset 0x1b8 in mbr */
+ } disk_mbr_signature; /* XEN_FW_DISK_MBR_SIGNATURE */
+ struct {
+ /* Int10, AX=4F15: Get EDID info. */
+ uint8_t capabilities;
+ uint8_t edid_transfer_time;
+ /* must refer to 128-byte buffer */
+ GUEST_HANDLE(uchar) edid;
+ } vbeddc_info; /* XEN_FW_VBEDDC_INFO */
+ } u;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_firmware_info_t);
+
+#define XENPF_enter_acpi_sleep 51
+struct xenpf_enter_acpi_sleep {
+ /* IN variables */
+ uint16_t pm1a_cnt_val; /* PM1a control value. */
+ uint16_t pm1b_cnt_val; /* PM1b control value. */
+ uint32_t sleep_state; /* Which state to enter (Sn). */
+ uint32_t flags; /* Must be zero. */
+};
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_enter_acpi_sleep_t);
+
+#define XENPF_change_freq 52
+struct xenpf_change_freq {
+ /* IN variables */
+ uint32_t flags; /* Must be zero. */
+ uint32_t cpu; /* Physical cpu. */
+ uint64_t freq; /* New frequency (Hz). */
+};
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_change_freq_t);
+
+/*
+ * Get idle times (nanoseconds since boot) for physical CPUs specified in the
+ * @cpumap_bitmap with range [0..@cpumap_nr_cpus-1]. The @idletime array is
+ * indexed by CPU number; only entries with the corresponding @cpumap_bitmap
+ * bit set are written to. On return, @cpumap_bitmap is modified so that any
+ * non-existent CPUs are cleared. Such CPUs have their @idletime array entry
+ * cleared.
+ */
+#define XENPF_getidletime 53
+struct xenpf_getidletime {
+ /* IN/OUT variables */
+ /* IN: CPUs to interrogate; OUT: subset of IN which are present */
+ GUEST_HANDLE(uchar) cpumap_bitmap;
+ /* IN variables */
+ /* Size of cpumap bitmap. */
+ uint32_t cpumap_nr_cpus;
+ /* Must be indexable for every cpu in cpumap_bitmap. */
+ GUEST_HANDLE(uint64_t) idletime;
+ /* OUT variables */
+ /* System time when the idletime snapshots were taken. */
+ uint64_t now;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_getidletime_t);
+
+#define XENPF_set_processor_pminfo 54
+
+/* ability bits */
+#define XEN_PROCESSOR_PM_CX 1
+#define XEN_PROCESSOR_PM_PX 2
+#define XEN_PROCESSOR_PM_TX 4
+
+/* cmd type */
+#define XEN_PM_CX 0
+#define XEN_PM_PX 1
+#define XEN_PM_TX 2
+
+/* Px sub info type */
+#define XEN_PX_PCT 1
+#define XEN_PX_PSS 2
+#define XEN_PX_PPC 4
+#define XEN_PX_PSD 8
+
+struct xen_power_register {
+ uint32_t space_id;
+ uint32_t bit_width;
+ uint32_t bit_offset;
+ uint32_t access_size;
+ uint64_t address;
+};
+
+struct xen_processor_csd {
+ uint32_t domain; /* domain number of one dependent group */
+ uint32_t coord_type; /* coordination type */
+ uint32_t num; /* number of processors in same domain */
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_processor_csd);
+
+struct xen_processor_cx {
+ struct xen_power_register reg; /* GAS for Cx trigger register */
+ uint8_t type; /* cstate value, c0: 0, c1: 1, ... */
+ uint32_t latency; /* worst latency (ms) to enter/exit this cstate */
+ uint32_t power; /* average power consumption(mW) */
+ uint32_t dpcnt; /* number of dependency entries */
+ GUEST_HANDLE(xen_processor_csd) dp; /* NULL if no dependency */
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_processor_cx);
+
+struct xen_processor_flags {
+ uint32_t bm_control:1;
+ uint32_t bm_check:1;
+ uint32_t has_cst:1;
+ uint32_t power_setup_done:1;
+ uint32_t bm_rld_set:1;
+};
+
+struct xen_processor_power {
+ uint32_t count; /* number of C state entries in array below */
+ struct xen_processor_flags flags; /* global flags of this processor */
+ GUEST_HANDLE(xen_processor_cx) states; /* supported c states */
+};
+
+struct xen_pct_register {
+ uint8_t descriptor;
+ uint16_t length;
+ uint8_t space_id;
+ uint8_t bit_width;
+ uint8_t bit_offset;
+ uint8_t reserved;
+ uint64_t address;
+};
+
+struct xen_processor_px {
+ uint64_t core_frequency; /* megahertz */
+ uint64_t power; /* milliWatts */
+ uint64_t transition_latency; /* microseconds */
+ uint64_t bus_master_latency; /* microseconds */
+ uint64_t control; /* control value */
+ uint64_t status; /* success indicator */
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_processor_px);
+
+struct xen_psd_package {
+ uint64_t num_entries;
+ uint64_t revision;
+ uint64_t domain;
+ uint64_t coord_type;
+ uint64_t num_processors;
+};
+
+struct xen_processor_performance {
+ uint32_t flags; /* flag for Px sub info type */
+ uint32_t platform_limit; /* Platform limitation on freq usage */
+ struct xen_pct_register control_register;
+ struct xen_pct_register status_register;
+ uint32_t state_count; /* total available performance states */
+ GUEST_HANDLE(xen_processor_px) states;
+ struct xen_psd_package domain_info;
+ uint32_t shared_type; /* coordination type of this processor */
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_processor_performance);
+
+struct xenpf_set_processor_pminfo {
+ /* IN variables */
+ uint32_t id; /* ACPI CPU ID */
+ uint32_t type; /* {XEN_PM_CX, XEN_PM_PX} */
+ union {
+ struct xen_processor_power power;/* Cx: _CST/_CSD */
+ struct xen_processor_performance perf; /* Px: _PPC/_PCT/_PSS/_PSD */
+ };
+};
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_set_processor_pminfo);
+
+struct xen_platform_op {
+ uint32_t cmd;
+ uint32_t interface_version; /* XENPF_INTERFACE_VERSION */
+ union {
+ struct xenpf_settime settime;
+ struct xenpf_add_memtype add_memtype;
+ struct xenpf_del_memtype del_memtype;
+ struct xenpf_read_memtype read_memtype;
+ struct xenpf_microcode_update microcode;
+ struct xenpf_platform_quirk platform_quirk;
+ struct xenpf_firmware_info firmware_info;
+ struct xenpf_enter_acpi_sleep enter_acpi_sleep;
+ struct xenpf_change_freq change_freq;
+ struct xenpf_getidletime getidletime;
+ struct xenpf_set_processor_pminfo set_pminfo;
+ uint8_t pad[128];
+ } u;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_platform_op_t);
+
+#endif /* __XEN_PUBLIC_PLATFORM_H__ */
/* These flags are passed in the 'flags' field of start_info_t. */
#define SIF_PRIVILEGED (1<<0) /* Is the domain privileged? */
#define SIF_INITDOMAIN (1<<1) /* Is this the initial control domain? */
+#define SIF_PM_MASK (0xFF<<8) /* reserve 1 byte for xen-pm options */
typedef uint64_t cpumap_t;
static inline int xen_must_unplug_nics(void) {
#if (defined(CONFIG_XEN_NETDEV_FRONTEND) || \
defined(CONFIG_XEN_NETDEV_FRONTEND_MODULE)) && \
- (defined(CONFIG_XEN_PLATFORM_PCI) || \
- defined(CONFIG_XEN_PLATFORM_PCI_MODULE))
+ defined(CONFIG_XEN_PVHVM)
return 1;
#else
return 0;
static inline int xen_must_unplug_disks(void) {
#if (defined(CONFIG_XEN_BLKDEV_FRONTEND) || \
defined(CONFIG_XEN_BLKDEV_FRONTEND_MODULE)) && \
- (defined(CONFIG_XEN_PLATFORM_PCI) || \
- defined(CONFIG_XEN_PLATFORM_PCI_MODULE))
+ defined(CONFIG_XEN_PVHVM)
return 1;
#else
return 0;
#include <linux/device.h>
#include <linux/notifier.h>
#include <linux/mutex.h>
+#include <linux/export.h>
#include <linux/completion.h>
#include <linux/init.h>
#include <linux/slab.h>
parse_args("Booting kernel", static_command_line, __start___param,
__stop___param - __start___param,
&unknown_bootoption);
+
+ jump_label_init();
+
/*
* These use large bootmem allocations and must precede
* kmem_cache_init()
#include <linux/async.h>
#include <linux/atomic.h>
#include <linux/ktime.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/wait.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <asm/types.h>
#include <linux/atomic.h>
#include <linux/mm.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/kthread.h>
#include <linux/fs.h>
#include <linux/namei.h>
#include <linux/mm.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <linux/mount.h>
#include <linux/socket.h>
#include <linux/audit.h>
#include <linux/capability.h>
#include <linux/mm.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/security.h>
#include <linux/syscalls.h>
#include <linux/pid_namespace.h>
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <linux/cgroup.h>
#include <linux/fs.h>
#include <linux/unistd.h>
#include <linux/security.h>
#include <linux/timex.h>
+#include <linux/export.h>
#include <linux/migrate.h>
#include <linux/posix-timers.h>
#include <linux/times.h>
#include <linux/sched.h>
#include <linux/unistd.h>
#include <linux/cpu.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/kthread.h>
#include <linux/stop_machine.h>
#include <linux/mutex.h>
#include <linux/gfp.h>
+#include <linux/suspend.h>
#ifdef CONFIG_SMP
/* Serializes the updates to cpu_online_mask, cpu_present_mask */
return 0;
}
core_initcall(alloc_frozen_cpus);
+
+/*
+ * Prevent regular CPU hotplug from racing with the freezer, by disabling CPU
+ * hotplug when tasks are about to be frozen. Also, don't allow the freezer
+ * to continue until any currently running CPU hotplug operation gets
+ * completed.
+ * To modify the 'cpu_hotplug_disabled' flag, we need to acquire the
+ * 'cpu_add_remove_lock'. And this same lock is also taken by the regular
+ * CPU hotplug path and released only after it is complete. Thus, we
+ * (and hence the freezer) will block here until any currently running CPU
+ * hotplug operation gets completed.
+ */
+void cpu_hotplug_disable_before_freeze(void)
+{
+ cpu_maps_update_begin();
+ cpu_hotplug_disabled = 1;
+ cpu_maps_update_done();
+}
+
+
+/*
+ * When tasks have been thawed, re-enable regular CPU hotplug (which had been
+ * disabled while beginning to freeze tasks).
+ */
+void cpu_hotplug_enable_after_thaw(void)
+{
+ cpu_maps_update_begin();
+ cpu_hotplug_disabled = 0;
+ cpu_maps_update_done();
+}
+
+/*
+ * When callbacks for CPU hotplug notifications are being executed, we must
+ * ensure that the state of the system with respect to the tasks being frozen
+ * or not, as reported by the notification, remains unchanged *throughout the
+ * duration* of the execution of the callbacks.
+ * Hence we need to prevent the freezer from racing with regular CPU hotplug.
+ *
+ * This synchronization is implemented by mutually excluding regular CPU
+ * hotplug and Suspend/Hibernate call paths by hooking onto the Suspend/
+ * Hibernate notifications.
+ */
+static int
+cpu_hotplug_pm_callback(struct notifier_block *nb,
+ unsigned long action, void *ptr)
+{
+ switch (action) {
+
+ case PM_SUSPEND_PREPARE:
+ case PM_HIBERNATION_PREPARE:
+ cpu_hotplug_disable_before_freeze();
+ break;
+
+ case PM_POST_SUSPEND:
+ case PM_POST_HIBERNATION:
+ cpu_hotplug_enable_after_thaw();
+ break;
+
+ default:
+ return NOTIFY_DONE;
+ }
+
+ return NOTIFY_OK;
+}
+
+
+int cpu_hotplug_pm_sync_init(void)
+{
+ pm_notifier(cpu_hotplug_pm_callback, 0);
+ return 0;
+}
+core_initcall(cpu_hotplug_pm_sync_init);
+
#endif /* CONFIG_PM_SLEEP_SMP */
/**
#include <linux/mempolicy.h>
#include <linux/mm.h>
#include <linux/memory.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/mount.h>
#include <linux/namei.h>
#include <linux/pagemap.h>
#include <linux/crash_dump.h>
#include <linux/init.h>
#include <linux/errno.h>
-#include <linux/module.h>
+#include <linux/export.h>
/*
* If we have booted due to a crash, max_pfn will be a very low value. We need
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/cred.h>
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/kgdb.h>
#include <linux/kdb.h>
#include <linux/kdebug.h>
+#include <linux/export.h>
#include "kdb_private.h"
#include "../debug_core.h"
* [It also happened to remove the sizeof(char *) == sizeof(int)
* assumption introduced because of those /proc/dma patches. -- Hennus]
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/spinlock.h>
#include <linux/reboot.h>
#include <linux/vmstat.h>
#include <linux/device.h>
+#include <linux/export.h>
#include <linux/vmalloc.h>
#include <linux/hardirq.h>
#include <linux/rculist.h>
p->pdeath_signal = 0;
p->exit_state = 0;
+ p->nr_dirtied = 0;
+ p->nr_dirtied_pause = 128 >> (PAGE_SHIFT - 10);
+
/*
* Ok, make it visible to the rest of the system.
* We dont wake it up yet.
#include <linux/interrupt.h>
#include <linux/suspend.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/syscalls.h>
#include <linux/freezer.h>
unsigned long flags;
spin_lock_irqsave(&p->sighand->siglock, flags);
- signal_wake_up(p, 1);
+ signal_wake_up(p, 0);
spin_unlock_irqrestore(&p->sighand->siglock, flags);
}
#include <linux/pagemap.h>
#include <linux/syscalls.h>
#include <linux/signal.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/magic.h>
#include <linux/pid.h>
#include <linux/nsproxy.h>
* Supplementary group IDs
*/
#include <linux/cred.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <linux/security.h>
#include <linux/syscalls.h>
*/
#include <linux/cpu.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/percpu.h>
#include <linux/hrtimer.h>
#include <linux/notifier.h>
#include <linux/freezer.h>
#include <linux/kthread.h>
#include <linux/lockdep.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/sysctl.h>
/*
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
#include <linux/syscore_ops.h>
*/
#include <linux/irq.h>
#include <linux/slab.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
#include <linux/radix-tree.h>
struct irq_desc *desc;
int i, ok = 0;
- if (atomic_inc_return(&irq_poll_active) == 1)
+ if (atomic_inc_return(&irq_poll_active) != 1)
goto out;
irq_poll_cpu = smp_processor_id();
*/
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/irq_work.h>
+#include <linux/percpu.h>
#include <linux/hardirq.h>
+#include <asm/processor.h>
/*
* An entry can be in one of four states:
return 0;
}
+/*
+ * Update code which is definitely not currently executing.
+ * Architectures which need heavyweight synchronization to modify
+ * running code can override this to make the non-live update case
+ * cheaper.
+ */
+void __weak arch_jump_label_transform_static(struct jump_entry *entry,
+ enum jump_label_type type)
+{
+ arch_jump_label_transform(entry, type);
+}
+
static void __jump_label_update(struct jump_label_key *key,
struct jump_entry *entry,
struct jump_entry *stop, int enable)
}
}
-/*
- * Not all archs need this.
- */
-void __weak arch_jump_label_text_poke_early(jump_label_t addr)
-{
-}
-
-static __init int jump_label_init(void)
+void __init jump_label_init(void)
{
struct jump_entry *iter_start = __start___jump_table;
struct jump_entry *iter_stop = __stop___jump_table;
jump_label_sort_entries(iter_start, iter_stop);
for (iter = iter_start; iter < iter_stop; iter++) {
- arch_jump_label_text_poke_early(iter->code);
- if (iter->key == (jump_label_t)(unsigned long)key)
+ struct jump_label_key *iterk;
+
+ iterk = (struct jump_label_key *)(unsigned long)iter->key;
+ arch_jump_label_transform_static(iter, jump_label_enabled(iterk) ?
+ JUMP_LABEL_ENABLE : JUMP_LABEL_DISABLE);
+ if (iterk == key)
continue;
- key = (struct jump_label_key *)(unsigned long)iter->key;
- atomic_set(&key->enabled, 0);
+ key = iterk;
key->entries = iter;
#ifdef CONFIG_MODULES
key->next = NULL;
#endif
}
jump_label_unlock();
-
- return 0;
}
-early_initcall(jump_label_init);
#ifdef CONFIG_MODULES
return;
for (iter = iter_start; iter < iter_stop; iter++)
- arch_jump_label_text_poke_early(iter->code);
+ arch_jump_label_transform_static(iter, JUMP_LABEL_DISABLE);
}
static int jump_label_add_module(struct module *mod)
*/
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/log2.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/stddef.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/moduleloader.h>
#include <linux/kallsyms.h>
#include <linux/freezer.h>
#include <linux/kobject.h>
#include <linux/string.h>
#include <linux/sysfs.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/kexec.h>
#include <linux/profile.h>
+#include <linux/stat.h>
#include <linux/sched.h>
#include <linux/capability.h>
#include <linux/cpuset.h>
#include <linux/unistd.h>
#include <linux/file.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/freezer.h>
#include <linux/notifier.h>
#include <linux/spinlock.h>
#include <linux/proc_fs.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/sched.h>
#include <linux/list.h>
#include <linux/stacktrace.h>
* Code for /proc/lockdep and /proc/lockdep_stats:
*
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/kallsyms.h>
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/moduleloader.h>
#include <linux/ftrace_event.h>
#include <linux/init.h>
return -ENOEXEC;
}
+ if (!get_modinfo(info, "intree"))
+ add_taint_module(mod, TAINT_OOT_MODULE);
+
if (get_modinfo(info, "staging")) {
add_taint_module(mod, TAINT_CRAP);
printk(KERN_WARNING "%s: module is from the staging directory,"
}
/* This has to be done once we're sure module name is unique. */
- if (!mod->taints || mod->taints == (1U<<TAINT_CRAP))
- dynamic_debug_setup(info.debug, info.num_debug);
+ dynamic_debug_setup(info.debug, info.num_debug);
/* Find duplicate symbols */
err = verify_export_symbols(mod);
module_bug_cleanup(mod);
ddebug:
- if (!mod->taints || mod->taints == (1U<<TAINT_CRAP))
- dynamic_debug_remove(info.debug);
+ dynamic_debug_remove(info.debug);
unlock:
mutex_unlock(&module_mutex);
synchronize_sched();
buf[bx++] = '(';
if (mod->taints & (1 << TAINT_PROPRIETARY_MODULE))
buf[bx++] = 'P';
+ else if (mod->taints & (1 << TAINT_OOT_MODULE))
+ buf[bx++] = 'O';
if (mod->taints & (1 << TAINT_FORCED_MODULE))
buf[bx++] = 'F';
if (mod->taints & (1 << TAINT_CRAP))
*/
#include <linux/mutex.h>
#include <linux/delay.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/poison.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
*/
#include <linux/mutex.h>
#include <linux/sched.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/debug_locks.h>
#include <linux/kdebug.h>
#include <linux/kprobes.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/notifier.h>
#include <linux/rcupdate.h>
#include <linux/vmalloc.h>
*/
#include <linux/slab.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/nsproxy.h>
#include <linux/init_task.h>
#include <linux/mnt_namespace.h>
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/cpumask.h>
#include <linux/err.h>
#include <linux/cpu.h>
{ TAINT_WARN, 'W', ' ' },
{ TAINT_CRAP, 'C', ' ' },
{ TAINT_FIRMWARE_WORKAROUND, 'I', ' ' },
+ { TAINT_OOT_MODULE, 'O', ' ' },
};
/**
* 'W' - Taint on warning.
* 'C' - modules from drivers/staging are loaded.
* 'I' - Working around severe firmware bug.
+ * 'O' - Out-of-tree module has been loaded.
*
* The string is overwritten by the next call to print_tainted().
*/
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
*/
#include <linux/mm.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/rculist.h>
#include <linux/syscalls.h>
#include <linux/wait.h>
#include <linux/workqueue.h>
-#include <linux/module.h>
+#include <linux/export.h>
/*
* Management arrays for POSIX timers. Timers are kept in slab memory
* This file is released under the GPLv2.
*/
+#include <linux/export.h>
#include <linux/suspend.h>
#include <linux/syscalls.h>
#include <linux/reboot.h>
static int hibernation_mode = HIBERNATION_SHUTDOWN;
+static bool freezer_test_done;
+
static const struct platform_hibernation_ops *hibernation_ops;
/**
if (error)
goto Close;
+ if (hibernation_test(TEST_FREEZER) ||
+ hibernation_testmode(HIBERNATION_TESTPROC)) {
+
+ /*
+ * Indicate to the caller that we are returning due to a
+ * successful freezer test.
+ */
+ freezer_test_done = true;
+ goto Close;
+ }
+
error = dpm_prepare(PMSG_FREEZE);
if (error)
goto Complete_devices;
if (error)
goto Finish;
- if (hibernation_test(TEST_FREEZER))
- goto Thaw;
-
- if (hibernation_testmode(HIBERNATION_TESTPROC))
- goto Thaw;
-
error = hibernation_snapshot(hibernation_mode == HIBERNATION_PLATFORM);
if (error)
goto Thaw;
+ if (freezer_test_done) {
+ freezer_test_done = false;
+ goto Thaw;
+ }
if (in_suspend) {
unsigned int flags = 0;
*
*/
+#include <linux/export.h>
#include <linux/kobject.h>
#include <linux/string.h>
#include <linux/resume-trace.h>
if (*s && len == strlen(*s) && !strncmp(buf, *s, len))
break;
}
- if (state < PM_SUSPEND_MAX && *s)
+ if (state < PM_SUSPEND_MAX && *s) {
error = enter_state(state);
if (error) {
suspend_stats.fail++;
dpm_save_failed_errno(error);
} else
suspend_stats.success++;
+ }
#endif
Exit:
#include <linux/kernel.h>
#include <linux/uaccess.h>
+#include <linux/export.h>
/*
* locking rule: all changes to constraints or notifiers lists
};
static struct pm_qos_object cpu_dma_pm_qos = {
.constraints = &cpu_dma_constraints,
+ .name = "cpu_dma_latency",
};
static BLOCKING_NOTIFIER_HEAD(network_lat_notifier);
pm_qos_add_request(req, pm_qos_class, PM_QOS_DEFAULT_VALUE);
filp->private_data = req;
- if (filp->private_data)
- return 0;
+ return 0;
}
return -EPERM;
}
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/init.h>
+#include <linux/kmod.h>
#include <linux/console.h>
#include <linux/cpu.h>
#include <linux/syscalls.h>
#include <linux/list.h>
#include <linux/mm.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <linux/suspend.h>
#include <linux/syscore_ops.h>
#include <trace/events/power.h>
#include <linux/suspend.h>
#include <linux/syscalls.h>
#include <linux/reboot.h>
+#include <linux/kmod.h>
#include <linux/string.h>
#include <linux/device.h>
#include <linux/miscdevice.h>
* to resolve timer interrupt livelocks, William Irwin, Oracle, 2004
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/profile.h>
#include <linux/bootmem.h>
#include <linux/notifier.h>
*/
#include <linux/capability.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/mm.h>
/*
* Range add and subtract
*/
-#include <linux/module.h>
+#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sort.h>
#include <linux/notifier.h>
#include <linux/cpu.h>
#include <linux/mutex.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/hardirq.h>
#define CREATE_TRACE_POINTS
* For detailed explanation of Read-Copy Update mechanism see -
* Documentation/RCU
*/
-#include <linux/moduleparam.h>
#include <linux/completion.h>
#include <linux/interrupt.h>
#include <linux/notifier.h>
#include <linux/rcupdate.h>
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/mutex.h>
#include <linux/sched.h>
#include <linux/types.h>
*/
#include <linux/kthread.h>
+#include <linux/module.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/nmi.h>
#include <linux/atomic.h>
#include <linux/bitops.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/completion.h>
#include <linux/moduleparam.h>
#include <linux/percpu.h>
#include <linux/errno.h>
#include <linux/stddef.h>
#include <linux/slab.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/string.h>
#include <linux/relay.h>
#include <linux/vmalloc.h>
* Arbitrary resource management.
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/init.h>
*/
#include <linux/sched.h>
#include <linux/delay.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/spinlock.h>
#include <linux/kallsyms.h>
#include <linux/syscalls.h>
*
*/
#include <linux/kthread.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/sysdev.h>
* See Documentation/rt-mutex-design.txt for details.
*/
#include <linux/spinlock.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/sched.h>
#include <linux/timer.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sched.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/rwsem.h>
#include <asm/system.h>
__setup("isolcpus=", isolated_cpu_setup);
-#define SD_NODES_PER_DOMAIN 16
-
#ifdef CONFIG_NUMA
/**
*/
#include <linux/spinlock.h>
#include <linux/hardirq.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/percpu.h>
#include <linux/ktime.h>
#include <linux/sched.h>
#include <linux/compiler.h>
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/sched.h>
#include <linux/semaphore.h>
#include <linux/spinlock.h>
*/
#include <linux/slab.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/fs.h>
#include <linux/rcupdate.h>
#include <linux/rculist.h>
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/percpu.h>
#include <linux/init.h>
#include <linux/gfp.h>
* Remote softirq infrastructure is by Jens Axboe.
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/kernel_stat.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/debug_locks.h>
-#include <linux/module.h>
+#include <linux/export.h>
/*
* If lockdep is enabled then we use the non-preemption spin-ops
*
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/mutex.h>
#include <linux/percpu.h>
#include <linux/preempt.h>
*/
#include <linux/sched.h>
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/kallsyms.h>
#include <linux/stacktrace.h>
#include <linux/cpu.h>
#include <linux/init.h>
#include <linux/kthread.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/percpu.h>
#include <linux/sched.h>
#include <linux/stop_machine.h>
* Copyright (C) 1991, 1992 Linus Torvalds
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/mm.h>
#include <linux/utsname.h>
#include <linux/mman.h>
#include <linux/prctl.h>
#include <linux/highuid.h>
#include <linux/fs.h>
+#include <linux/kmod.h>
#include <linux/perf_event.h>
#include <linux/resource.h>
#include <linux/kernel.h>
* with nanosecond accuracy
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/timex.h>
#include <linux/capability.h>
#include <linux/clocksource.h>
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/device.h>
+#include <linux/export.h>
#include <linux/file.h>
#include <linux/posix-clock.h>
#include <linux/slab.h>
*/
#include <linux/kernel_stat.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/interrupt.h>
#include <linux/percpu.h>
#include <linux/init.h>
#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/debugfs.h>
+#include <linux/export.h>
#include <linux/time.h>
#include <linux/uaccess.h>
#include <linux/hardirq.h>
#include <linux/kthread.h>
#include <linux/uaccess.h>
+#include <linux/module.h>
#include <linux/ftrace.h>
#include <linux/sysctl.h>
#include <linux/slab.h>
#include <trace/events/syscalls.h>
#include <linux/slab.h>
#include <linux/kernel.h>
+#include <linux/module.h> /* for MODULE_NAME_LEN via KSYM_SYMBOL_LEN */
#include <linux/ftrace.h>
#include <linux/perf_event.h>
#include <asm/syscall.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/smp.h>
int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
#include <linux/user-return-notifier.h>
#include <linux/percpu.h>
#include <linux/sched.h>
-#include <linux/module.h>
+#include <linux/export.h>
static DEFINE_PER_CPU(struct hlist_head, return_notifier_list);
#include <linux/bitops.h>
#include <linux/key.h>
#include <linux/interrupt.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/user_namespace.h>
/*
* License.
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/nsproxy.h>
#include <linux/slab.h>
#include <linux/user_namespace.h>
* License.
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/uts.h>
#include <linux/utsname.h>
#include <linux/err.h>
* License.
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/uts.h>
#include <linux/utsname.h>
#include <linux/sysctl.h>
* (C) 2004 William Irwin, Oracle
*/
#include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/wait.h>
* Please read Documentation/workqueue.txt for details.
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/debugfs.h>
#include <linux/uaccess.h>
+#include <linux/export.h>
#include <linux/device.h>
#include <linux/types.h>
#include <linux/sched.h>
[NLA_U16] = sizeof(u16),
[NLA_U32] = sizeof(u32),
[NLA_U64] = sizeof(u64),
+ [NLA_MSECS] = sizeof(u64),
[NLA_NESTED] = NLA_HDRLEN,
};
*/
#include <linux/raid/pq.h>
+#include <linux/module.h>
#ifndef __KERNEL__
#include <sys/mman.h>
#include <stdio.h>
uint8_t exptbl[256], invtbl[256];
printf("#include <linux/raid/pq.h>\n");
+ printf("#include <linux/export.h>\n");
/* Compute multiplication table */
printf("\nconst u8 __attribute__((aligned(256)))\n"
* the syndrome.)
*/
+#include <linux/export.h>
#include <linux/raid/pq.h>
/* Recover two failed data blocks. */
"BdiDirtyThresh: %10lu kB\n"
"DirtyThresh: %10lu kB\n"
"BackgroundThresh: %10lu kB\n"
+ "BdiDirtied: %10lu kB\n"
"BdiWritten: %10lu kB\n"
"BdiWriteBandwidth: %10lu kBps\n"
"b_dirty: %10lu\n"
K(bdi_thresh),
K(dirty_thresh),
K(background_thresh),
+ (unsigned long) K(bdi_stat(bdi, BDI_DIRTIED)),
(unsigned long) K(bdi_stat(bdi, BDI_WRITTEN)),
(unsigned long) K(bdi->write_bandwidth),
nr_dirty,
* the bdi from the thread. Hopefully 1024 is
* large enough for efficient IO.
*/
- writeback_inodes_wb(&bdi->wb, 1024);
+ writeback_inodes_wb(&bdi->wb, 1024,
+ WB_REASON_FORKER_THREAD);
} else {
/*
* The spinlock makes sure we do not lose
bdi->bw_time_stamp = jiffies;
bdi->written_stamp = 0;
+ bdi->balanced_dirty_ratelimit = INIT_BW;
+ bdi->dirty_ratelimit = INIT_BW;
bdi->write_bandwidth = INIT_BW;
bdi->avg_write_bandwidth = INIT_BW;
bdi_unregister(bdi);
+ /*
+ * If bdi_unregister() had already been called earlier, the
+ * wakeup_timer could still be armed because bdi_prune_sb()
+ * can race with the bdi_wakeup_thread_delayed() calls from
+ * __mark_inode_dirty().
+ */
+ del_timer_sync(&bdi->wb.wakeup_timer);
+
for (i = 0; i < NR_BDI_STAT_ITEMS; i++)
percpu_counter_destroy(&bdi->bdi_stat[i]);
#include <linux/pfn.h>
#include <linux/slab.h>
#include <linux/bootmem.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/kmemleak.h>
#include <linux/range.h>
#include <linux/memblock.h>
*/
#include <linux/mm.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/swap.h>
#include <linux/gfp.h>
#include <linux/bio.h>
#include <linux/dmapool.h>
#include <linux/kernel.h>
#include <linux/list.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/mutex.h>
#include <linux/poison.h>
#include <linux/sched.h>
#include <linux/slab.h>
+#include <linux/stat.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/types.h>
* most "normal" filesystems (but you don't /have/ to use this:
* the NFS filesystem used to do this differently, for example)
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/compiler.h>
#include <linux/fs.h>
#include <linux/uaccess.h>
#include <linux/fs.h>
#include <linux/pagemap.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/uio.h>
#include <linux/rmap.h>
#include <linux/mmu_notifier.h>
#include <linux/pagemap.h>
#include <linux/swapops.h>
#include <linux/rmap.h>
-#include <linux/module.h>
#include <linux/syscalls.h>
#include <linux/mmu_notifier.h>
*/
#include <linux/mm.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/swap.h>
#include <linux/bio.h>
#include <linux/pagemap.h>
* anon_vma prepared.
*/
if (unlikely(anon_vma_prepare(vma))) {
+ page_cache_release(new_page);
+ page_cache_release(old_page);
/* Caller expects lock to be held */
spin_lock(&mm->page_table_lock);
return VM_FAULT_OOM;
#include <linux/sched.h>
#include <linux/jiffies.h>
#include <linux/delay.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/kthread.h>
#include <linux/prio_tree.h>
#include <linux/fs.h>
/*
* Access kernel memory without faulting.
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/mm.h>
#include <linux/uaccess.h>
#include <linux/bit_spinlock.h>
#include <linux/rcupdate.h>
#include <linux/limits.h>
+#include <linux/export.h>
#include <linux/mutex.h>
#include <linux/rbtree.h>
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/ksm.h>
#include <linux/rmap.h>
+#include <linux/export.h>
#include <linux/pagemap.h>
#include <linux/swap.h>
#include <linux/backing-dev.h>
#include <linux/pagemap.h>
#include <linux/ksm.h>
#include <linux/rmap.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/delayacct.h>
#include <linux/init.h>
#include <linux/writeback.h>
#include <linux/pagemap.h>
#include <linux/bootmem.h>
#include <linux/compiler.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/pagevec.h>
#include <linux/writeback.h>
#include <linux/slab.h>
#include <linux/cpuset.h>
#include <linux/slab.h>
#include <linux/string.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/nsproxy.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/slab.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/mempool.h>
#include <linux/blkdev.h>
#include <linux/writeback.h>
*/
#include <linux/migrate.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/swap.h>
#include <linux/swapops.h>
#include <linux/pagemap.h>
#include <linux/mempolicy.h>
#include <linux/syscalls.h>
#include <linux/sched.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/rmap.h>
#include <linux/mmzone.h>
#include <linux/hugetlb.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/kobject.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include "internal.h"
#ifdef CONFIG_DEBUG_MEMORY_INIT
#include <linux/security.h>
#include <linux/hugetlb.h>
#include <linux/profile.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/mount.h>
#include <linux/mempolicy.h>
#include <linux/rmap.h>
#include <linux/mm.h>
#include <linux/mmu_context.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/sched.h>
#include <asm/mmu_context.h>
#include <linux/rculist.h>
#include <linux/mmu_notifier.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/mm.h>
#include <linux/err.h>
#include <linux/rcupdate.h>
#include <linux/stddef.h>
#include <linux/mm.h>
#include <linux/mmzone.h>
-#include <linux/module.h>
struct pglist_data *first_online_pgdat(void)
{
#include <linux/pfn.h>
#include <linux/slab.h>
#include <linux/bootmem.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/kmemleak.h>
#include <linux/range.h>
#include <linux/memblock.h>
* Copyright (c) 2007-2010 Paul Mundt <lethal@linux-sh.org>
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/mm.h>
#include <linux/mman.h>
#include <linux/swap.h>
* between processes, it syncs the pagetable across all
* processes.
*/
-struct vm_struct *alloc_vm_area(size_t size)
+struct vm_struct *alloc_vm_area(size_t size, pte_t **ptes)
{
BUG();
return NULL;
#include <linux/timex.h>
#include <linux/jiffies.h>
#include <linux/cpuset.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/notifier.h>
#include <linux/memcontrol.h>
#include <linux/mempolicy.h>
if (!p)
return 0;
+ if (p->signal->oom_score_adj == OOM_SCORE_ADJ_MIN) {
+ task_unlock(p);
+ return 0;
+ }
+
/*
* The memory controller may have a limit of 0 bytes, so avoid a divide
* by zero, if necessary.
*/
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/spinlock.h>
#include <linux/fs.h>
#include <linux/mm.h>
*/
#define BANDWIDTH_INTERVAL max(HZ/5, 1)
+#define RATELIMIT_CALC_SHIFT 10
+
/*
* After a CPU has dirtied this many pages, balance_dirty_pages_ratelimited
* will look to see if it needs to force writeback or throttling.
*/
static long ratelimit_pages = 32;
-/*
- * When balance_dirty_pages decides that the caller needs to perform some
- * non-background writeback, this is how many pages it will attempt to write.
- * It should be somewhat larger than dirtied pages to ensure that reasonably
- * large amounts of I/O are submitted.
- */
-static inline long sync_writeback_pages(unsigned long dirtied)
-{
- if (dirtied < ratelimit_pages)
- dirtied = ratelimit_pages;
-
- return dirtied + dirtied / 2;
-}
-
/* The following parameters are exported via /proc/sys/vm */
/*
int shift = calc_period_shift();
prop_change_shift(&vm_completions, shift);
prop_change_shift(&vm_dirties, shift);
+
+ writeback_set_ratelimit();
}
int dirty_background_ratio_handler(struct ctl_table *table, int write,
numerator, denominator);
}
-static inline void task_dirties_fraction(struct task_struct *tsk,
- long *numerator, long *denominator)
-{
- prop_fraction_single(&vm_dirties, &tsk->dirties,
- numerator, denominator);
-}
-
-/*
- * task_dirty_limit - scale down dirty throttling threshold for one task
- *
- * task specific dirty limit:
- *
- * dirty -= (dirty/8) * p_{t}
- *
- * To protect light/slow dirtying tasks from heavier/fast ones, we start
- * throttling individual tasks before reaching the bdi dirty limit.
- * Relatively low thresholds will be allocated to heavy dirtiers. So when
- * dirty pages grow large, heavy dirtiers will be throttled first, which will
- * effectively curb the growth of dirty pages. Light dirtiers with high enough
- * dirty threshold may never get throttled.
- */
-#define TASK_LIMIT_FRACTION 8
-static unsigned long task_dirty_limit(struct task_struct *tsk,
- unsigned long bdi_dirty)
-{
- long numerator, denominator;
- unsigned long dirty = bdi_dirty;
- u64 inv = dirty / TASK_LIMIT_FRACTION;
-
- task_dirties_fraction(tsk, &numerator, &denominator);
- inv *= numerator;
- do_div(inv, denominator);
-
- dirty -= inv;
-
- return max(dirty, bdi_dirty/2);
-}
-
-/* Minimum limit for any task */
-static unsigned long task_min_dirty_limit(unsigned long bdi_dirty)
-{
- return bdi_dirty - bdi_dirty / TASK_LIMIT_FRACTION;
-}
-
/*
* bdi_min_ratio keeps the sum of the minimum dirty shares of all
* registered backing devices, which, for obvious reasons, can not
return x + 1; /* Ensure that we never return 0 */
}
+static unsigned long dirty_freerun_ceiling(unsigned long thresh,
+ unsigned long bg_thresh)
+{
+ return (thresh + bg_thresh) / 2;
+}
+
static unsigned long hard_dirty_limit(unsigned long thresh)
{
return max(thresh, global_dirty_limit);
return bdi_dirty;
}
+/*
+ * Dirty position control.
+ *
+ * (o) global/bdi setpoints
+ *
+ * We want the dirty pages be balanced around the global/bdi setpoints.
+ * When the number of dirty pages is higher/lower than the setpoint, the
+ * dirty position control ratio (and hence task dirty ratelimit) will be
+ * decreased/increased to bring the dirty pages back to the setpoint.
+ *
+ * pos_ratio = 1 << RATELIMIT_CALC_SHIFT
+ *
+ * if (dirty < setpoint) scale up pos_ratio
+ * if (dirty > setpoint) scale down pos_ratio
+ *
+ * if (bdi_dirty < bdi_setpoint) scale up pos_ratio
+ * if (bdi_dirty > bdi_setpoint) scale down pos_ratio
+ *
+ * task_ratelimit = dirty_ratelimit * pos_ratio >> RATELIMIT_CALC_SHIFT
+ *
+ * (o) global control line
+ *
+ * ^ pos_ratio
+ * |
+ * | |<===== global dirty control scope ======>|
+ * 2.0 .............*
+ * | .*
+ * | . *
+ * | . *
+ * | . *
+ * | . *
+ * | . *
+ * 1.0 ................................*
+ * | . . *
+ * | . . *
+ * | . . *
+ * | . . *
+ * | . . *
+ * 0 +------------.------------------.----------------------*------------->
+ * freerun^ setpoint^ limit^ dirty pages
+ *
+ * (o) bdi control line
+ *
+ * ^ pos_ratio
+ * |
+ * | *
+ * | *
+ * | *
+ * | *
+ * | * |<=========== span ============>|
+ * 1.0 .......................*
+ * | . *
+ * | . *
+ * | . *
+ * | . *
+ * | . *
+ * | . *
+ * | . *
+ * | . *
+ * | . *
+ * | . *
+ * | . *
+ * 1/4 ...............................................* * * * * * * * * * * *
+ * | . .
+ * | . .
+ * | . .
+ * 0 +----------------------.-------------------------------.------------->
+ * bdi_setpoint^ x_intercept^
+ *
+ * The bdi control line won't drop below pos_ratio=1/4, so that bdi_dirty can
+ * be smoothly throttled down to normal if it starts high in situations like
+ * - start writing to a slow SD card and a fast disk at the same time. The SD
+ * card's bdi_dirty may rush to many times higher than bdi_setpoint.
+ * - the bdi dirty thresh drops quickly due to change of JBOD workload
+ */
+static unsigned long bdi_position_ratio(struct backing_dev_info *bdi,
+ unsigned long thresh,
+ unsigned long bg_thresh,
+ unsigned long dirty,
+ unsigned long bdi_thresh,
+ unsigned long bdi_dirty)
+{
+ unsigned long write_bw = bdi->avg_write_bandwidth;
+ unsigned long freerun = dirty_freerun_ceiling(thresh, bg_thresh);
+ unsigned long limit = hard_dirty_limit(thresh);
+ unsigned long x_intercept;
+ unsigned long setpoint; /* dirty pages' target balance point */
+ unsigned long bdi_setpoint;
+ unsigned long span;
+ long long pos_ratio; /* for scaling up/down the rate limit */
+ long x;
+
+ if (unlikely(dirty >= limit))
+ return 0;
+
+ /*
+ * global setpoint
+ *
+ * setpoint - dirty 3
+ * f(dirty) := 1.0 + (----------------)
+ * limit - setpoint
+ *
+ * it's a 3rd order polynomial that subjects to
+ *
+ * (1) f(freerun) = 2.0 => rampup dirty_ratelimit reasonably fast
+ * (2) f(setpoint) = 1.0 => the balance point
+ * (3) f(limit) = 0 => the hard limit
+ * (4) df/dx <= 0 => negative feedback control
+ * (5) the closer to setpoint, the smaller |df/dx| (and the reverse)
+ * => fast response on large errors; small oscillation near setpoint
+ */
+ setpoint = (freerun + limit) / 2;
+ x = div_s64((setpoint - dirty) << RATELIMIT_CALC_SHIFT,
+ limit - setpoint + 1);
+ pos_ratio = x;
+ pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT;
+ pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT;
+ pos_ratio += 1 << RATELIMIT_CALC_SHIFT;
+
+ /*
+ * We have computed basic pos_ratio above based on global situation. If
+ * the bdi is over/under its share of dirty pages, we want to scale
+ * pos_ratio further down/up. That is done by the following mechanism.
+ */
+
+ /*
+ * bdi setpoint
+ *
+ * f(bdi_dirty) := 1.0 + k * (bdi_dirty - bdi_setpoint)
+ *
+ * x_intercept - bdi_dirty
+ * := --------------------------
+ * x_intercept - bdi_setpoint
+ *
+ * The main bdi control line is a linear function that subjects to
+ *
+ * (1) f(bdi_setpoint) = 1.0
+ * (2) k = - 1 / (8 * write_bw) (in single bdi case)
+ * or equally: x_intercept = bdi_setpoint + 8 * write_bw
+ *
+ * For single bdi case, the dirty pages are observed to fluctuate
+ * regularly within range
+ * [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2]
+ * for various filesystems, where (2) can yield in a reasonable 12.5%
+ * fluctuation range for pos_ratio.
+ *
+ * For JBOD case, bdi_thresh (not bdi_dirty!) could fluctuate up to its
+ * own size, so move the slope over accordingly and choose a slope that
+ * yields 100% pos_ratio fluctuation on suddenly doubled bdi_thresh.
+ */
+ if (unlikely(bdi_thresh > thresh))
+ bdi_thresh = thresh;
+ bdi_thresh = max(bdi_thresh, (limit - dirty) / 8);
+ /*
+ * scale global setpoint to bdi's:
+ * bdi_setpoint = setpoint * bdi_thresh / thresh
+ */
+ x = div_u64((u64)bdi_thresh << 16, thresh + 1);
+ bdi_setpoint = setpoint * (u64)x >> 16;
+ /*
+ * Use span=(8*write_bw) in single bdi case as indicated by
+ * (thresh - bdi_thresh ~= 0) and transit to bdi_thresh in JBOD case.
+ *
+ * bdi_thresh thresh - bdi_thresh
+ * span = ---------- * (8 * write_bw) + ------------------- * bdi_thresh
+ * thresh thresh
+ */
+ span = (thresh - bdi_thresh + 8 * write_bw) * (u64)x >> 16;
+ x_intercept = bdi_setpoint + span;
+
+ if (bdi_dirty < x_intercept - span / 4) {
+ pos_ratio = div_u64(pos_ratio * (x_intercept - bdi_dirty),
+ x_intercept - bdi_setpoint + 1);
+ } else
+ pos_ratio /= 4;
+
+ /*
+ * bdi reserve area, safeguard against dirty pool underrun and disk idle
+ * It may push the desired control point of global dirty pages higher
+ * than setpoint.
+ */
+ x_intercept = bdi_thresh / 2;
+ if (bdi_dirty < x_intercept) {
+ if (bdi_dirty > x_intercept / 8)
+ pos_ratio = div_u64(pos_ratio * x_intercept, bdi_dirty);
+ else
+ pos_ratio *= 8;
+ }
+
+ return pos_ratio;
+}
+
static void bdi_update_write_bandwidth(struct backing_dev_info *bdi,
unsigned long elapsed,
unsigned long written)
spin_unlock(&dirty_lock);
}
+/*
+ * Maintain bdi->dirty_ratelimit, the base dirty throttle rate.
+ *
+ * Normal bdi tasks will be curbed at or below it in long term.
+ * Obviously it should be around (write_bw / N) when there are N dd tasks.
+ */
+static void bdi_update_dirty_ratelimit(struct backing_dev_info *bdi,
+ unsigned long thresh,
+ unsigned long bg_thresh,
+ unsigned long dirty,
+ unsigned long bdi_thresh,
+ unsigned long bdi_dirty,
+ unsigned long dirtied,
+ unsigned long elapsed)
+{
+ unsigned long freerun = dirty_freerun_ceiling(thresh, bg_thresh);
+ unsigned long limit = hard_dirty_limit(thresh);
+ unsigned long setpoint = (freerun + limit) / 2;
+ unsigned long write_bw = bdi->avg_write_bandwidth;
+ unsigned long dirty_ratelimit = bdi->dirty_ratelimit;
+ unsigned long dirty_rate;
+ unsigned long task_ratelimit;
+ unsigned long balanced_dirty_ratelimit;
+ unsigned long pos_ratio;
+ unsigned long step;
+ unsigned long x;
+
+ /*
+ * The dirty rate will match the writeout rate in long term, except
+ * when dirty pages are truncated by userspace or re-dirtied by FS.
+ */
+ dirty_rate = (dirtied - bdi->dirtied_stamp) * HZ / elapsed;
+
+ pos_ratio = bdi_position_ratio(bdi, thresh, bg_thresh, dirty,
+ bdi_thresh, bdi_dirty);
+ /*
+ * task_ratelimit reflects each dd's dirty rate for the past 200ms.
+ */
+ task_ratelimit = (u64)dirty_ratelimit *
+ pos_ratio >> RATELIMIT_CALC_SHIFT;
+ task_ratelimit++; /* it helps rampup dirty_ratelimit from tiny values */
+
+ /*
+ * A linear estimation of the "balanced" throttle rate. The theory is,
+ * if there are N dd tasks, each throttled at task_ratelimit, the bdi's
+ * dirty_rate will be measured to be (N * task_ratelimit). So the below
+ * formula will yield the balanced rate limit (write_bw / N).
+ *
+ * Note that the expanded form is not a pure rate feedback:
+ * rate_(i+1) = rate_(i) * (write_bw / dirty_rate) (1)
+ * but also takes pos_ratio into account:
+ * rate_(i+1) = rate_(i) * (write_bw / dirty_rate) * pos_ratio (2)
+ *
+ * (1) is not realistic because pos_ratio also takes part in balancing
+ * the dirty rate. Consider the state
+ * pos_ratio = 0.5 (3)
+ * rate = 2 * (write_bw / N) (4)
+ * If (1) is used, it will stuck in that state! Because each dd will
+ * be throttled at
+ * task_ratelimit = pos_ratio * rate = (write_bw / N) (5)
+ * yielding
+ * dirty_rate = N * task_ratelimit = write_bw (6)
+ * put (6) into (1) we get
+ * rate_(i+1) = rate_(i) (7)
+ *
+ * So we end up using (2) to always keep
+ * rate_(i+1) ~= (write_bw / N) (8)
+ * regardless of the value of pos_ratio. As long as (8) is satisfied,
+ * pos_ratio is able to drive itself to 1.0, which is not only where
+ * the dirty count meet the setpoint, but also where the slope of
+ * pos_ratio is most flat and hence task_ratelimit is least fluctuated.
+ */
+ balanced_dirty_ratelimit = div_u64((u64)task_ratelimit * write_bw,
+ dirty_rate | 1);
+
+ /*
+ * We could safely do this and return immediately:
+ *
+ * bdi->dirty_ratelimit = balanced_dirty_ratelimit;
+ *
+ * However to get a more stable dirty_ratelimit, the below elaborated
+ * code makes use of task_ratelimit to filter out sigular points and
+ * limit the step size.
+ *
+ * The below code essentially only uses the relative value of
+ *
+ * task_ratelimit - dirty_ratelimit
+ * = (pos_ratio - 1) * dirty_ratelimit
+ *
+ * which reflects the direction and size of dirty position error.
+ */
+
+ /*
+ * dirty_ratelimit will follow balanced_dirty_ratelimit iff
+ * task_ratelimit is on the same side of dirty_ratelimit, too.
+ * For example, when
+ * - dirty_ratelimit > balanced_dirty_ratelimit
+ * - dirty_ratelimit > task_ratelimit (dirty pages are above setpoint)
+ * lowering dirty_ratelimit will help meet both the position and rate
+ * control targets. Otherwise, don't update dirty_ratelimit if it will
+ * only help meet the rate target. After all, what the users ultimately
+ * feel and care are stable dirty rate and small position error.
+ *
+ * |task_ratelimit - dirty_ratelimit| is used to limit the step size
+ * and filter out the sigular points of balanced_dirty_ratelimit. Which
+ * keeps jumping around randomly and can even leap far away at times
+ * due to the small 200ms estimation period of dirty_rate (we want to
+ * keep that period small to reduce time lags).
+ */
+ step = 0;
+ if (dirty < setpoint) {
+ x = min(bdi->balanced_dirty_ratelimit,
+ min(balanced_dirty_ratelimit, task_ratelimit));
+ if (dirty_ratelimit < x)
+ step = x - dirty_ratelimit;
+ } else {
+ x = max(bdi->balanced_dirty_ratelimit,
+ max(balanced_dirty_ratelimit, task_ratelimit));
+ if (dirty_ratelimit > x)
+ step = dirty_ratelimit - x;
+ }
+
+ /*
+ * Don't pursue 100% rate matching. It's impossible since the balanced
+ * rate itself is constantly fluctuating. So decrease the track speed
+ * when it gets close to the target. Helps eliminate pointless tremors.
+ */
+ step >>= dirty_ratelimit / (2 * step + 1);
+ /*
+ * Limit the tracking speed to avoid overshooting.
+ */
+ step = (step + 7) / 8;
+
+ if (dirty_ratelimit < balanced_dirty_ratelimit)
+ dirty_ratelimit += step;
+ else
+ dirty_ratelimit -= step;
+
+ bdi->dirty_ratelimit = max(dirty_ratelimit, 1UL);
+ bdi->balanced_dirty_ratelimit = balanced_dirty_ratelimit;
+
+ trace_bdi_dirty_ratelimit(bdi, dirty_rate, task_ratelimit);
+}
+
void __bdi_update_bandwidth(struct backing_dev_info *bdi,
unsigned long thresh,
+ unsigned long bg_thresh,
unsigned long dirty,
unsigned long bdi_thresh,
unsigned long bdi_dirty,
{
unsigned long now = jiffies;
unsigned long elapsed = now - bdi->bw_time_stamp;
+ unsigned long dirtied;
unsigned long written;
/*
if (elapsed < BANDWIDTH_INTERVAL)
return;
+ dirtied = percpu_counter_read(&bdi->bdi_stat[BDI_DIRTIED]);
written = percpu_counter_read(&bdi->bdi_stat[BDI_WRITTEN]);
/*
if (elapsed > HZ && time_before(bdi->bw_time_stamp, start_time))
goto snapshot;
- if (thresh)
+ if (thresh) {
global_update_bandwidth(thresh, dirty, now);
-
+ bdi_update_dirty_ratelimit(bdi, thresh, bg_thresh, dirty,
+ bdi_thresh, bdi_dirty,
+ dirtied, elapsed);
+ }
bdi_update_write_bandwidth(bdi, elapsed, written);
snapshot:
+ bdi->dirtied_stamp = dirtied;
bdi->written_stamp = written;
bdi->bw_time_stamp = now;
}
static void bdi_update_bandwidth(struct backing_dev_info *bdi,
unsigned long thresh,
+ unsigned long bg_thresh,
unsigned long dirty,
unsigned long bdi_thresh,
unsigned long bdi_dirty,
if (time_is_after_eq_jiffies(bdi->bw_time_stamp + BANDWIDTH_INTERVAL))
return;
spin_lock(&bdi->wb.list_lock);
- __bdi_update_bandwidth(bdi, thresh, dirty, bdi_thresh, bdi_dirty,
- start_time);
+ __bdi_update_bandwidth(bdi, thresh, bg_thresh, dirty,
+ bdi_thresh, bdi_dirty, start_time);
spin_unlock(&bdi->wb.list_lock);
}
+/*
+ * After a task dirtied this many pages, balance_dirty_pages_ratelimited_nr()
+ * will look to see if it needs to start dirty throttling.
+ *
+ * If dirty_poll_interval is too low, big NUMA machines will call the expensive
+ * global_page_state() too often. So scale it near-sqrt to the safety margin
+ * (the number of pages we may dirty without exceeding the dirty limits).
+ */
+static unsigned long dirty_poll_interval(unsigned long dirty,
+ unsigned long thresh)
+{
+ if (thresh > dirty)
+ return 1UL << (ilog2(thresh - dirty) >> 1);
+
+ return 1;
+}
+
+static unsigned long bdi_max_pause(struct backing_dev_info *bdi,
+ unsigned long bdi_dirty)
+{
+ unsigned long bw = bdi->avg_write_bandwidth;
+ unsigned long hi = ilog2(bw);
+ unsigned long lo = ilog2(bdi->dirty_ratelimit);
+ unsigned long t;
+
+ /* target for 20ms max pause on 1-dd case */
+ t = HZ / 50;
+
+ /*
+ * Scale up pause time for concurrent dirtiers in order to reduce CPU
+ * overheads.
+ *
+ * (N * 20ms) on 2^N concurrent tasks.
+ */
+ if (hi > lo)
+ t += (hi - lo) * (20 * HZ) / 1024;
+
+ /*
+ * Limit pause time for small memory systems. If sleeping for too long
+ * time, a small pool of dirty/writeback pages may go empty and disk go
+ * idle.
+ *
+ * 8 serves as the safety ratio.
+ */
+ if (bdi_dirty)
+ t = min(t, bdi_dirty * HZ / (8 * bw + 1));
+
+ /*
+ * The pause time will be settled within range (max_pause/4, max_pause).
+ * Apply a minimal value of 4 to get a non-zero max_pause/4.
+ */
+ return clamp_val(t, 4, MAX_PAUSE);
+}
+
/*
* balance_dirty_pages() must be called by processes which are generating dirty
* data. It looks at the number of dirty pages in the machine and will force
- * the caller to perform writeback if the system is over `vm_dirty_ratio'.
+ * the caller to wait once crossing the (background_thresh + dirty_thresh) / 2.
* If we're over `background_thresh' then the writeback threads are woken to
* perform some writeout.
*/
static void balance_dirty_pages(struct address_space *mapping,
- unsigned long write_chunk)
+ unsigned long pages_dirtied)
{
- unsigned long nr_reclaimable, bdi_nr_reclaimable;
+ unsigned long nr_reclaimable; /* = file_dirty + unstable_nfs */
+ unsigned long bdi_reclaimable;
unsigned long nr_dirty; /* = file_dirty + writeback + unstable_nfs */
unsigned long bdi_dirty;
+ unsigned long freerun;
unsigned long background_thresh;
unsigned long dirty_thresh;
unsigned long bdi_thresh;
- unsigned long task_bdi_thresh;
- unsigned long min_task_bdi_thresh;
- unsigned long pages_written = 0;
- unsigned long pause = 1;
+ long pause = 0;
+ long uninitialized_var(max_pause);
bool dirty_exceeded = false;
- bool clear_dirty_exceeded = true;
+ unsigned long task_ratelimit;
+ unsigned long uninitialized_var(dirty_ratelimit);
+ unsigned long pos_ratio;
struct backing_dev_info *bdi = mapping->backing_dev_info;
unsigned long start_time = jiffies;
for (;;) {
+ /*
+ * Unstable writes are a feature of certain networked
+ * filesystems (i.e. NFS) in which data may have been
+ * written to the server's write cache, but has not yet
+ * been flushed to permanent storage.
+ */
nr_reclaimable = global_page_state(NR_FILE_DIRTY) +
global_page_state(NR_UNSTABLE_NFS);
nr_dirty = nr_reclaimable + global_page_state(NR_WRITEBACK);
* catch-up. This avoids (excessively) small writeouts
* when the bdi limits are ramping up.
*/
- if (nr_dirty <= (background_thresh + dirty_thresh) / 2)
+ freerun = dirty_freerun_ceiling(dirty_thresh,
+ background_thresh);
+ if (nr_dirty <= freerun)
break;
+ if (unlikely(!writeback_in_progress(bdi)))
+ bdi_start_background_writeback(bdi);
+
+ /*
+ * bdi_thresh is not treated as some limiting factor as
+ * dirty_thresh, due to reasons
+ * - in JBOD setup, bdi_thresh can fluctuate a lot
+ * - in a system with HDD and USB key, the USB key may somehow
+ * go into state (bdi_dirty >> bdi_thresh) either because
+ * bdi_dirty starts high, or because bdi_thresh drops low.
+ * In this case we don't want to hard throttle the USB key
+ * dirtiers for 100 seconds until bdi_dirty drops under
+ * bdi_thresh. Instead the auxiliary bdi control line in
+ * bdi_position_ratio() will let the dirtier task progress
+ * at some rate <= (write_bw / 2) for bringing down bdi_dirty.
+ */
bdi_thresh = bdi_dirty_limit(bdi, dirty_thresh);
- min_task_bdi_thresh = task_min_dirty_limit(bdi_thresh);
- task_bdi_thresh = task_dirty_limit(current, bdi_thresh);
/*
* In order to avoid the stacked BDI deadlock we need
* actually dirty; with m+n sitting in the percpu
* deltas.
*/
- if (task_bdi_thresh < 2 * bdi_stat_error(bdi)) {
- bdi_nr_reclaimable = bdi_stat_sum(bdi, BDI_RECLAIMABLE);
- bdi_dirty = bdi_nr_reclaimable +
+ if (bdi_thresh < 2 * bdi_stat_error(bdi)) {
+ bdi_reclaimable = bdi_stat_sum(bdi, BDI_RECLAIMABLE);
+ bdi_dirty = bdi_reclaimable +
bdi_stat_sum(bdi, BDI_WRITEBACK);
} else {
- bdi_nr_reclaimable = bdi_stat(bdi, BDI_RECLAIMABLE);
- bdi_dirty = bdi_nr_reclaimable +
+ bdi_reclaimable = bdi_stat(bdi, BDI_RECLAIMABLE);
+ bdi_dirty = bdi_reclaimable +
bdi_stat(bdi, BDI_WRITEBACK);
}
- /*
- * The bdi thresh is somehow "soft" limit derived from the
- * global "hard" limit. The former helps to prevent heavy IO
- * bdi or process from holding back light ones; The latter is
- * the last resort safeguard.
- */
- dirty_exceeded = (bdi_dirty > task_bdi_thresh) ||
+ dirty_exceeded = (bdi_dirty > bdi_thresh) ||
(nr_dirty > dirty_thresh);
- clear_dirty_exceeded = (bdi_dirty <= min_task_bdi_thresh) &&
- (nr_dirty <= dirty_thresh);
-
- if (!dirty_exceeded)
- break;
-
- if (!bdi->dirty_exceeded)
+ if (dirty_exceeded && !bdi->dirty_exceeded)
bdi->dirty_exceeded = 1;
- bdi_update_bandwidth(bdi, dirty_thresh, nr_dirty,
- bdi_thresh, bdi_dirty, start_time);
-
- /* Note: nr_reclaimable denotes nr_dirty + nr_unstable.
- * Unstable writes are a feature of certain networked
- * filesystems (i.e. NFS) in which data may have been
- * written to the server's write cache, but has not yet
- * been flushed to permanent storage.
- * Only move pages to writeback if this bdi is over its
- * threshold otherwise wait until the disk writes catch
- * up.
- */
- trace_balance_dirty_start(bdi);
- if (bdi_nr_reclaimable > task_bdi_thresh) {
- pages_written += writeback_inodes_wb(&bdi->wb,
- write_chunk);
- trace_balance_dirty_written(bdi, pages_written);
- if (pages_written >= write_chunk)
- break; /* We've done our duty */
+ bdi_update_bandwidth(bdi, dirty_thresh, background_thresh,
+ nr_dirty, bdi_thresh, bdi_dirty,
+ start_time);
+
+ max_pause = bdi_max_pause(bdi, bdi_dirty);
+
+ dirty_ratelimit = bdi->dirty_ratelimit;
+ pos_ratio = bdi_position_ratio(bdi, dirty_thresh,
+ background_thresh, nr_dirty,
+ bdi_thresh, bdi_dirty);
+ task_ratelimit = ((u64)dirty_ratelimit * pos_ratio) >>
+ RATELIMIT_CALC_SHIFT;
+ if (unlikely(task_ratelimit == 0)) {
+ pause = max_pause;
+ goto pause;
+ }
+ pause = HZ * pages_dirtied / task_ratelimit;
+ if (unlikely(pause <= 0)) {
+ trace_balance_dirty_pages(bdi,
+ dirty_thresh,
+ background_thresh,
+ nr_dirty,
+ bdi_thresh,
+ bdi_dirty,
+ dirty_ratelimit,
+ task_ratelimit,
+ pages_dirtied,
+ pause,
+ start_time);
+ pause = 1; /* avoid resetting nr_dirtied_pause below */
+ break;
}
+ pause = min(pause, max_pause);
+
+pause:
+ trace_balance_dirty_pages(bdi,
+ dirty_thresh,
+ background_thresh,
+ nr_dirty,
+ bdi_thresh,
+ bdi_dirty,
+ dirty_ratelimit,
+ task_ratelimit,
+ pages_dirtied,
+ pause,
+ start_time);
__set_current_state(TASK_UNINTERRUPTIBLE);
io_schedule_timeout(pause);
- trace_balance_dirty_wait(bdi);
dirty_thresh = hard_dirty_limit(dirty_thresh);
/*
* 200ms is typically more than enough to curb heavy dirtiers;
* (b) the pause time limit makes the dirtiers more responsive.
*/
- if (nr_dirty < dirty_thresh &&
- bdi_dirty < (task_bdi_thresh + bdi_thresh) / 2 &&
- time_after(jiffies, start_time + MAX_PAUSE))
+ if (nr_dirty < dirty_thresh)
break;
-
- /*
- * Increase the delay for each loop, up to our previous
- * default of taking a 100ms nap.
- */
- pause <<= 1;
- if (pause > HZ / 10)
- pause = HZ / 10;
}
- /* Clear dirty_exceeded flag only when no task can exceed the limit */
- if (clear_dirty_exceeded && bdi->dirty_exceeded)
+ if (!dirty_exceeded && bdi->dirty_exceeded)
bdi->dirty_exceeded = 0;
+ current->nr_dirtied = 0;
+ if (pause == 0) { /* in freerun area */
+ current->nr_dirtied_pause =
+ dirty_poll_interval(nr_dirty, dirty_thresh);
+ } else if (pause <= max_pause / 4 &&
+ pages_dirtied >= current->nr_dirtied_pause) {
+ current->nr_dirtied_pause = clamp_val(
+ dirty_ratelimit * (max_pause / 2) / HZ,
+ pages_dirtied + pages_dirtied / 8,
+ pages_dirtied * 4);
+ } else if (pause >= max_pause) {
+ current->nr_dirtied_pause = 1 | clamp_val(
+ dirty_ratelimit * (max_pause / 2) / HZ,
+ pages_dirtied / 4,
+ pages_dirtied - pages_dirtied / 8);
+ }
+
if (writeback_in_progress(bdi))
return;
* In normal mode, we start background writeout at the lower
* background_thresh, to keep the amount of dirty memory low.
*/
- if ((laptop_mode && pages_written) ||
- (!laptop_mode && (nr_reclaimable > background_thresh)))
+ if (laptop_mode)
+ return;
+
+ if (nr_reclaimable > background_thresh)
bdi_start_background_writeback(bdi);
}
}
}
-static DEFINE_PER_CPU(unsigned long, bdp_ratelimits) = 0;
+static DEFINE_PER_CPU(int, bdp_ratelimits);
/**
* balance_dirty_pages_ratelimited_nr - balance dirty memory state
unsigned long nr_pages_dirtied)
{
struct backing_dev_info *bdi = mapping->backing_dev_info;
- unsigned long ratelimit;
- unsigned long *p;
+ int ratelimit;
+ int *p;
if (!bdi_cap_account_dirty(bdi))
return;
- ratelimit = ratelimit_pages;
- if (mapping->backing_dev_info->dirty_exceeded)
- ratelimit = 8;
+ ratelimit = current->nr_dirtied_pause;
+ if (bdi->dirty_exceeded)
+ ratelimit = min(ratelimit, 32 >> (PAGE_SHIFT - 10));
+
+ current->nr_dirtied += nr_pages_dirtied;
+ preempt_disable();
/*
- * Check the rate limiting. Also, we do not want to throttle real-time
- * tasks in balance_dirty_pages(). Period.
+ * This prevents one CPU to accumulate too many dirtied pages without
+ * calling into balance_dirty_pages(), which can happen when there are
+ * 1000+ tasks, all of them start dirtying pages at exactly the same
+ * time, hence all honoured too large initial task->nr_dirtied_pause.
*/
- preempt_disable();
p = &__get_cpu_var(bdp_ratelimits);
- *p += nr_pages_dirtied;
- if (unlikely(*p >= ratelimit)) {
- ratelimit = sync_writeback_pages(*p);
+ if (unlikely(current->nr_dirtied >= ratelimit))
*p = 0;
- preempt_enable();
- balance_dirty_pages(mapping, ratelimit);
- return;
+ else {
+ *p += nr_pages_dirtied;
+ if (unlikely(*p >= ratelimit_pages)) {
+ *p = 0;
+ ratelimit = 0;
+ }
}
preempt_enable();
+
+ if (unlikely(current->nr_dirtied >= ratelimit))
+ balance_dirty_pages(mapping, current->nr_dirtied);
}
EXPORT_SYMBOL(balance_dirty_pages_ratelimited_nr);
* threshold
*/
if (bdi_has_dirty_io(&q->backing_dev_info))
- bdi_start_writeback(&q->backing_dev_info, nr_pages);
+ bdi_start_writeback(&q->backing_dev_info, nr_pages,
+ WB_REASON_LAPTOP_TIMER);
}
/*
*
* Here we set ratelimit_pages to a level which ensures that when all CPUs are
* dirtying in parallel, we cannot go more than 3% (1/32) over the dirty memory
- * thresholds before writeback cuts in.
- *
- * But the limit should not be set too high. Because it also controls the
- * amount of memory which the balance_dirty_pages() caller has to write back.
- * If this is too large then the caller will block on the IO queue all the
- * time. So limit it to four megabytes - the balance_dirty_pages() caller
- * will write six megabyte chunks, max.
+ * thresholds.
*/
void writeback_set_ratelimit(void)
{
- ratelimit_pages = vm_total_pages / (num_online_cpus() * 32);
+ unsigned long background_thresh;
+ unsigned long dirty_thresh;
+ global_dirty_limits(&background_thresh, &dirty_thresh);
+ ratelimit_pages = dirty_thresh / (num_online_cpus() * 32);
if (ratelimit_pages < 16)
ratelimit_pages = 16;
- if (ratelimit_pages * PAGE_CACHE_SIZE > 4096 * 1024)
- ratelimit_pages = (4096 * 1024) / PAGE_CACHE_SIZE;
}
static int __cpuinit
__inc_zone_page_state(page, NR_FILE_DIRTY);
__inc_zone_page_state(page, NR_DIRTIED);
__inc_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE);
+ __inc_bdi_stat(mapping->backing_dev_info, BDI_DIRTIED);
task_dirty_inc(current);
task_io_account_write(PAGE_CACHE_SIZE);
}
#include <linux/gfp.h>
#include <linux/mm.h>
#include <linux/mmzone.h>
-#include <linux/module.h>
#include <linux/quicklist.h>
DEFINE_PER_CPU(struct quicklist [CONFIG_NR_QUICK], quicklist);
#include <linux/fs.h>
#include <linux/gfp.h>
#include <linux/mm.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/blkdev.h>
#include <linux/backing-dev.h>
#include <linux/task_io_accounting_ops.h>
#include <linux/ksm.h>
#include <linux/rmap.h>
#include <linux/rcupdate.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/memcontrol.h>
#include <linux/mmu_notifier.h>
#include <linux/migrate.h>
#include <linux/pagemap.h>
#include <linux/file.h>
#include <linux/mm.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/swap.h>
static struct vfsmount *shm_mnt;
#include <linux/swap.h> /* struct reclaim_state */
#include <linux/cache.h>
#include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/rcupdate.h>
#include <linux/list.h>
#include <linux/kmemleak.h>
#include <linux/mmzone.h>
#include <linux/bootmem.h>
#include <linux/highmem.h>
-#include <linux/module.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/vmalloc.h>
#include <linux/mmzone.h>
#include <linux/bootmem.h>
#include <linux/highmem.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/spinlock.h>
#include <linux/vmalloc.h>
#include "internal.h"
#include <linux/pagemap.h>
#include <linux/pagevec.h>
#include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/mm_inline.h>
#include <linux/buffer_head.h> /* for try_to_release_page() */
#include <linux/percpu_counter.h>
*
* Rewritten to use page cache, (C) 1998 Stephen Tweedie
*/
-#include <linux/module.h>
#include <linux/mm.h>
#include <linux/gfp.h>
#include <linux/kernel_stat.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/init.h>
-#include <linux/module.h>
#include <linux/ksm.h>
#include <linux/rmap.h>
#include <linux/security.h>
#include <linux/gfp.h>
#include <linux/mm.h>
#include <linux/swap.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/pagemap.h>
#include <linux/highmem.h>
#include <linux/pagevec.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/string.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/err.h>
#include <linux/sched.h>
#include <asm/uaccess.h>
static int f(pte_t *pte, pgtable_t table, unsigned long addr, void *data)
{
- /* apply_to_page_range() does all the hard work. */
+ pte_t ***p = data;
+
+ if (p) {
+ *(*p) = pte;
+ (*p)++;
+ }
return 0;
}
/**
* alloc_vm_area - allocate a range of kernel address space
* @size: size of the area
+ * @ptes: returns the PTEs for the address space
*
* Returns: NULL on failure, vm_struct on success
*
* This function reserves a range of kernel address space, and
* allocates pagetables to map that range. No actual mappings
- * are created. If the kernel address space is not shared
- * between processes, it syncs the pagetable across all
- * processes.
+ * are created.
+ *
+ * If @ptes is non-NULL, pointers to the PTEs (in init_mm)
+ * allocated for the VM area are returned.
*/
-struct vm_struct *alloc_vm_area(size_t size)
+struct vm_struct *alloc_vm_area(size_t size, pte_t **ptes)
{
struct vm_struct *area;
* of kernel virtual address space and mapped into init_mm.
*/
if (apply_to_page_range(&init_mm, (unsigned long)area->addr,
- area->size, f, NULL)) {
+ size, f, ptes ? &ptes : NULL)) {
free_vm_area(area);
return NULL;
}
- /*
- * If the allocated address space is passed to a hypercall
- * before being used then we cannot rely on a page fault to
- * trigger an update of the page tables. So sync all the page
- * tables here.
- */
- vmalloc_sync_all();
-
return area;
}
EXPORT_SYMBOL_GPL(alloc_vm_area);
*/
writeback_threshold = sc->nr_to_reclaim + sc->nr_to_reclaim / 2;
if (total_scanned > writeback_threshold) {
- wakeup_flusher_threads(laptop_mode ? 0 : total_scanned);
+ wakeup_flusher_threads(laptop_mode ? 0 : total_scanned,
+ WB_REASON_TRY_TO_FREE_PAGES);
sc->may_writepage = 1;
}
#include <linux/net.h>
#include <linux/proc_fs.h>
#include <linux/init.h>
+#include <linux/export.h>
#include <net/arp.h>
/*
#include <linux/rtnetlink.h>
#include <linux/llc.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <net/llc.h>
#include <net/llc_pdu.h>
#include <net/garp.h>
#include <linux/etherdevice.h>
#include <linux/llc.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <net/llc.h>
#include <net/llc_pdu.h>
#include <net/stp.h>
#include <linux/netdevice.h>
#include <linux/if_vlan.h>
#include <linux/netpoll.h>
+#include <linux/export.h>
#include "vlan.h"
bool vlan_do_receive(struct sk_buff **skbp, bool last_handler)
#include <linux/kernel.h>
#include <linux/netdevice.h>
#include <linux/if_vlan.h>
+#include <linux/module.h>
#include <net/net_namespace.h>
#include <net/netlink.h>
#include <net/rtnetlink.h>
#include <linux/init.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
+#include <linux/export.h>
int sysctl_aarp_expiry_time = AARP_EXPIRY_TIME;
int sysctl_aarp_tick_time = AARP_TICK_TIME;
#include <net/net_namespace.h>
#include <net/sock.h>
#include <linux/atalk.h>
+#include <linux/export.h>
static __inline__ struct atalk_iface *atalk_get_interface_idx(loff_t pos)
#include <linux/init.h>
#include <linux/skbuff.h>
#include <linux/bitops.h>
+#include <linux/export.h>
#include <net/sock.h> /* for sock_no_* */
#include "resources.h" /* devs and vccs */
#include <linux/bitops.h>
#include <net/sock.h> /* for sock_no_* */
#include <linux/uaccess.h>
+#include <linux/export.h>
#include "resources.h"
#include "common.h" /* common for PVCs and SVCs */
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/seq_file.h>
+#include <linux/export.h>
static ax25_route *ax25_route_list;
static DEFINE_RWLOCK(ax25_route_lock);
#include <linux/stat.h>
#include <linux/netfilter.h>
#include <linux/sysctl.h>
+#include <linux/export.h>
#include <net/ip.h>
#include <net/arp.h>
goto encrypt;
auth:
- if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend))
+ if (test_and_set_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend))
return 0;
if (!hci_conn_auth(conn, sec_level, auth_type))
if (!test_bit(HCI_RAW, &hdev->flags)) {
set_bit(HCI_INIT, &hdev->flags);
__hci_request(hdev, hci_reset_req, 0,
- msecs_to_jiffies(250));
+ msecs_to_jiffies(HCI_INIT_TIMEOUT));
clear_bit(HCI_INIT, &hdev->flags);
}
#include <linux/init.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
+#include <linux/module.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
if (sock_owned_by_user(sk)) {
/* sk is owned by user. Try again later */
- __set_chan_timer(chan, HZ / 5);
+ __set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
bh_unlock_sock(sk);
chan_put(chan);
return;
if (sock_owned_by_user(sk)) {
l2cap_state_change(chan, BT_DISCONN);
__clear_chan_timer(chan);
- __set_chan_timer(chan, HZ / 5);
+ __set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
break;
}
default:
sk->sk_err = ECONNRESET;
- __set_chan_timer(chan, HZ * 5);
+ __set_chan_timer(chan, L2CAP_DISC_REJ_TIMEOUT);
l2cap_send_disconn_req(conn, chan, ECONNRESET);
goto done;
}
if (sock_owned_by_user(sk)) {
l2cap_state_change(chan, BT_DISCONN);
__clear_chan_timer(chan);
- __set_chan_timer(chan, HZ / 5);
+ __set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
bh_unlock_sock(sk);
return 0;
}
if (sock_owned_by_user(sk)) {
l2cap_state_change(chan,BT_DISCONN);
__clear_chan_timer(chan);
- __set_chan_timer(chan, HZ / 5);
+ __set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
bh_unlock_sock(sk);
return 0;
}
if (encrypt == 0x00) {
if (chan->sec_level == BT_SECURITY_MEDIUM) {
__clear_chan_timer(chan);
- __set_chan_timer(chan, HZ * 5);
+ __set_chan_timer(chan, L2CAP_ENC_TIMEOUT);
} else if (chan->sec_level == BT_SECURITY_HIGH)
l2cap_chan_close(chan, ECONNREFUSED);
} else {
L2CAP_CONN_REQ, sizeof(req), &req);
} else {
__clear_chan_timer(chan);
- __set_chan_timer(chan, HZ / 10);
+ __set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
}
} else if (chan->state == BT_CONNECT2) {
struct l2cap_conn_rsp rsp;
}
} else {
l2cap_state_change(chan, BT_DISCONN);
- __set_chan_timer(chan, HZ / 10);
+ __set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
res = L2CAP_CR_SEC_BLOCK;
stat = L2CAP_CS_NO_INFO;
}
/* Bluetooth L2CAP sockets. */
#include <linux/security.h>
+#include <linux/export.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
/* Bluetooth HCI Management interface */
#include <linux/uaccess.h>
+#include <linux/module.h>
#include <asm/unaligned.h>
#include <net/bluetooth/bluetooth.h>
hci_del_off_timer(d);
- set_bit(HCI_MGMT, &d->flags);
-
if (test_bit(HCI_SETUP, &d->flags))
continue;
continue;
}
+ if (test_bit(RFCOMM_ENC_DROP, &d->flags)) {
+ __rfcomm_dlc_close(d, ECONNREFUSED);
+ continue;
+ }
+
if (test_and_clear_bit(RFCOMM_AUTH_ACCEPT, &d->flags)) {
rfcomm_dlc_clear_timer(d);
if (d->out) {
if (test_and_clear_bit(RFCOMM_SEC_PENDING, &d->flags)) {
rfcomm_dlc_clear_timer(d);
if (status || encrypt == 0x00) {
- __rfcomm_dlc_close(d, ECONNREFUSED);
+ set_bit(RFCOMM_ENC_DROP, &d->flags);
continue;
}
}
rfcomm_dlc_set_timer(d, RFCOMM_AUTH_TIMEOUT);
continue;
} else if (d->sec_level == BT_SECURITY_HIGH) {
- __rfcomm_dlc_close(d, ECONNREFUSED);
+ set_bit(RFCOMM_ENC_DROP, &d->flags);
continue;
}
}
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/netfilter_bridge.h>
+#include <linux/export.h>
#include "br_private.h"
/* Bridge group multicast address 802.1d (pg 51). */
__skb_pull(skb2, offset);
skb_reset_transport_header(skb2);
+ skb_postpull_rcsum(skb2, skb_network_header(skb2),
+ skb_network_header_len(skb2));
icmp6_type = icmp6_hdr(skb2)->icmp6_type;
int err = 0;
struct net_bridge_mdb_htable *mdb;
- spin_lock(&br->multicast_lock);
+ spin_lock_bh(&br->multicast_lock);
if (br->multicast_disabled == !val)
goto unlock;
}
unlock:
- spin_unlock(&br->multicast_lock);
+ spin_unlock_bh(&br->multicast_lock);
return err;
}
*/
#include <linux/kernel.h>
+#include <linux/kmod.h>
#include <linux/etherdevice.h>
#include <linux/rtnetlink.h>
#include <linux/net.h>
#include <linux/netdevice.h>
#include <linux/mutex.h>
+#include <linux/module.h>
#include <net/netns/generic.h>
#include <net/net_namespace.h>
#include <net/pkt_sched.h>
#include <linux/string.h>
#include <linux/skbuff.h>
#include <linux/hardirq.h>
+#include <linux/export.h>
#include <net/caif/cfpkt.h>
#define PKT_PREFIX 48
#include <linux/ceph/messenger.h>
#include <linux/ceph/decode.h>
#include <linux/ceph/pagelist.h>
+#include <linux/export.h>
/*
* Ceph uses the messenger to exchange ceph_msg messages with other
ceph_pagelist_init(req->r_trail);
}
/* create request message; allow space for oid */
- msg_size += 40;
+ msg_size += MAX_OBJ_NAME_SIZE;
if (snapc)
msg_size += sizeof(u64) * snapc->num_snaps;
if (use_mempool)
#include <linux/filter.h>
#include <linux/compat.h>
#include <linux/security.h>
+#include <linux/export.h>
#include <net/scm.h>
#include <net/sock.h>
#include <linux/netdevice.h>
#include <linux/rtnetlink.h>
+#include <linux/export.h>
#include <linux/list.h>
#include <linux/proc_fs.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/list.h>
+#include <linux/module.h>
#include <net/net_namespace.h>
#include <net/sock.h>
#include <net/fib_rules.h>
#include <linux/rtnetlink.h>
#include <linux/wireless.h>
#include <linux/vmalloc.h>
+#include <linux/export.h>
#include <net/wext.h>
#include "net-sysfs.h"
#include <linux/inetdevice.h>
#include <linux/inet.h>
#include <linux/interrupt.h>
+#include <linux/export.h>
#include <linux/netpoll.h>
#include <linux/sched.h>
#include <linux/delay.h>
#include <linux/nsproxy.h>
#include <linux/proc_fs.h>
#include <linux/file.h>
+#include <linux/export.h>
#include <net/net_namespace.h>
#include <net/netns/generic.h>
#include <linux/rtnetlink.h>
#include <linux/notifier.h>
+#include <linux/export.h>
#include <net/netevent.h>
static ATOMIC_NOTIFIER_HEAD(netevent_notif_chain);
#include <linux/rcupdate.h>
#include <linux/workqueue.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <net/tcp.h>
#include <net/udp.h>
#include <asm/unaligned.h>
#include <linux/phy.h>
#include <linux/ptp_classify.h>
#include <linux/skbuff.h>
+#include <linux/export.h>
static struct sock_filter ptp_filter[] = {
PTP_FILTER
#include <linux/dmaengine.h>
#include <linux/socket.h>
+#include <linux/export.h>
#include <net/tcp.h>
#include <net/netdma.h>
#include <linux/rtnetlink.h>
#include <linux/notifier.h>
+#include <linux/export.h>
static ATOMIC_NOTIFIER_HEAD(dcbevent_notif_chain);
#include <linux/dcbnl.h>
#include <net/dcbevent.h>
#include <linux/rtnetlink.h>
+#include <linux/module.h>
#include <net/sock.h>
/**
#include "dccp.h"
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <linux/export.h>
static struct kmem_cache *dccp_ackvec_slab;
static struct kmem_cache *dccp_ackvec_record_slab;
* Copyright (c) 2007 The University of Aberdeen, Scotland, UK
* Copyright (c) 2007 Arnaldo Carvalho de Melo <acme@redhat.com>
*/
+#include <linux/moduleparam.h>
#include "tfrc.h"
#ifdef CONFIG_IP_DCCP_TFRC_DEBUG
#include <linux/dccp.h>
#include <linux/skbuff.h>
+#include <linux/export.h>
#include "dccp.h"
#include <linux/netfilter_decnet.h>
#include <linux/rcupdate.h>
#include <linux/times.h>
+#include <linux/export.h>
#include <asm/errno.h>
#include <net/net_namespace.h>
#include <net/netlink.h>
#include <linux/spinlock.h>
#include <linux/list.h>
#include <linux/rcupdate.h>
+#include <linux/export.h>
#include <net/neighbour.h>
#include <net/dst.h>
#include <net/flow.h>
#include <linux/netdevice.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <net/dsa.h>
#include "dsa_priv.h"
#include <net/genetlink.h>
#include <net/sock.h>
#include <linux/nl802154.h>
+#include <linux/export.h>
#include <net/af_ieee802154.h>
#include <net/nl802154.h>
#include <net/ieee802154.h>
memcpy(top_iph+1, iph+1, top_iph->ihl*4 - sizeof(struct iphdr));
}
- err = ah->nexthdr;
-
kfree(AH_SKB_CB(skb)->tmp);
xfrm_output_resume(skb, err);
}
if (err)
goto out;
+ err = ah->nexthdr;
+
skb->network_header += ah_hlen;
memcpy(skb_network_header(skb), work_iph, ihl);
__skb_pull(skb, ah_hlen + ihl);
skb_set_transport_header(skb, -ihl);
-
- err = ah->nexthdr;
out:
kfree(AH_SKB_CB(skb)->tmp);
xfrm_input_resume(skb, err);
if (err == -EINPROGRESS)
goto out;
- if (err == -EBUSY)
- err = NET_XMIT_DROP;
goto out_free;
}
#include <linux/init.h>
#include <linux/list.h>
#include <linux/rcupdate.h>
+#include <linux/export.h>
#include <net/ip.h>
#include <net/route.h>
#include <net/tcp.h>
#include <linux/list.h>
#include <linux/slab.h>
#include <linux/prefetch.h>
+#include <linux/export.h>
#include <net/net_namespace.h>
#include <net/ip.h>
#include <net/protocol.h>
&np->rcv_saddr);
ipv6_addr_copy((struct in6_addr *)r->id.idiag_dst,
&np->daddr);
- if (ext & (1 << (INET_DIAG_TOS - 1)))
- RTA_PUT_U8(skb, INET_DIAG_TOS, np->tclass);
+ if (ext & (1 << (INET_DIAG_TCLASS - 1)))
+ RTA_PUT_U8(skb, INET_DIAG_TCLASS, np->tclass);
}
#endif
#include <linux/kernel.h>
#include <linux/kmemcheck.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <net/inet_hashtables.h>
#include <net/inet_timewait_sock.h>
#include <net/ip.h>
}
if (srrptr <= srrspace) {
opt->srr_is_hit = 1;
+ iph->daddr = nexthop;
opt->is_changed = 1;
}
return 0;
#include <linux/delay.h>
#include <linux/nfs_fs.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <net/net_namespace.h>
#include <net/arp.h>
#include <net/ip.h>
#include <linux/if_arp.h>
#include <linux/netfilter_ipv4.h>
#include <linux/compat.h>
+#include <linux/export.h>
#include <net/ipip.h>
#include <net/checksum.h>
#include <net/netlink.h>
#include <linux/ip.h>
#include <linux/skbuff.h>
#include <linux/gfp.h>
+#include <linux/export.h>
#include <net/route.h>
#include <net/xfrm.h>
#include <net/ip.h>
#include <net/netfilter/nf_conntrack_expect.h>
#include <net/netfilter/nf_conntrack_acct.h>
#include <linux/rculist_nulls.h>
+#include <linux/export.h>
struct ct_iter_state {
struct seq_net_private p;
#include <linux/ip.h>
#include <linux/netfilter.h>
+#include <linux/export.h>
#include <net/secure_seq.h>
#include <net/netfilter/nf_nat.h>
#include <net/netfilter/nf_nat_core.h>
#include <linux/types.h>
#include <linux/init.h>
+#include <linux/export.h>
#include <linux/ip.h>
#include <linux/icmp.h>
#include <linux/init.h>
#include <linux/ip.h>
#include <linux/sctp.h>
+#include <linux/module.h>
#include <net/sctp/checksum.h>
#include <net/netfilter/nf_nat_protocol.h>
#include <linux/types.h>
#include <linux/init.h>
+#include <linux/export.h>
#include <linux/ip.h>
#include <linux/tcp.h>
*/
#include <linux/types.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/ip.h>
#include <linux/udp.h>
#include <linux/udp.h>
#include <linux/netfilter.h>
+#include <linux/module.h>
#include <net/netfilter/nf_nat.h>
#include <net/netfilter/nf_nat_protocol.h>
#include <net/protocol.h>
#include <linux/skbuff.h>
#include <linux/proc_fs.h>
+#include <linux/export.h>
#include <net/sock.h>
#include <net/ping.h>
#include <net/udp.h>
sk = ping_v4_lookup(net, iph->daddr, iph->saddr,
ntohs(icmph->un.echo.id), skb->dev->ifindex);
if (sk == NULL) {
- ICMP_INC_STATS_BH(net, ICMP_MIB_INERRORS);
pr_debug("no socket, dropping\n");
return; /* No socket for error */
}
pr_debug("ping_queue_rcv_skb(sk=%p,sk->num=%d,skb=%p)\n",
inet_sk(sk), inet_sk(sk)->inet_num, skb);
if (sock_queue_rcv_skb(sk, skb) < 0) {
- ICMP_INC_STATS_BH(sock_net(sk), ICMP_MIB_INERRORS);
kfree_skb(skb);
pr_debug("ping_queue_rcv_skb -> failed\n");
return -1;
#include <linux/inetdevice.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
+#include <linux/export.h>
#include <net/sock.h>
#include <net/raw.h>
#include <linux/errno.h>
#include <linux/aio.h>
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/spinlock.h>
#include <linux/sockios.h>
#include <linux/socket.h>
spin_unlock_bh(rt_hash_lock_addr(hash));
}
+static int check_peer_redir(struct dst_entry *dst, struct inet_peer *peer)
+{
+ struct rtable *rt = (struct rtable *) dst;
+ __be32 orig_gw = rt->rt_gateway;
+ struct neighbour *n, *old_n;
+
+ dst_confirm(&rt->dst);
+
+ rt->rt_gateway = peer->redirect_learned.a4;
+
+ n = ipv4_neigh_lookup(&rt->dst, &rt->rt_gateway);
+ if (IS_ERR(n))
+ return PTR_ERR(n);
+ old_n = xchg(&rt->dst._neighbour, n);
+ if (old_n)
+ neigh_release(old_n);
+ if (!n || !(n->nud_state & NUD_VALID)) {
+ if (n)
+ neigh_event_send(n, NULL);
+ rt->rt_gateway = orig_gw;
+ return -EAGAIN;
+ } else {
+ rt->rt_flags |= RTCF_REDIRECTED;
+ call_netevent_notifiers(NETEVENT_NEIGH_UPDATE, n);
+ }
+ return 0;
+}
+
/* called in rcu_read_lock() section */
void ip_rt_redirect(__be32 old_gw, __be32 daddr, __be32 new_gw,
__be32 saddr, struct net_device *dev)
{
int s, i;
struct in_device *in_dev = __in_dev_get_rcu(dev);
- struct rtable *rt;
__be32 skeys[2] = { saddr, 0 };
int ikeys[2] = { dev->ifindex, 0 };
- struct flowi4 fl4;
struct inet_peer *peer;
struct net *net;
goto reject_redirect;
}
- memset(&fl4, 0, sizeof(fl4));
- fl4.daddr = daddr;
for (s = 0; s < 2; s++) {
for (i = 0; i < 2; i++) {
- fl4.flowi4_oif = ikeys[i];
- fl4.saddr = skeys[s];
- rt = __ip_route_output_key(net, &fl4);
- if (IS_ERR(rt))
- continue;
-
- if (rt->dst.error || rt->dst.dev != dev ||
- rt->rt_gateway != old_gw) {
- ip_rt_put(rt);
- continue;
- }
+ unsigned int hash;
+ struct rtable __rcu **rthp;
+ struct rtable *rt;
+
+ hash = rt_hash(daddr, skeys[s], ikeys[i], rt_genid(net));
+
+ rthp = &rt_hash_table[hash].chain;
+
+ while ((rt = rcu_dereference(*rthp)) != NULL) {
+ rthp = &rt->dst.rt_next;
+
+ if (rt->rt_key_dst != daddr ||
+ rt->rt_key_src != skeys[s] ||
+ rt->rt_oif != ikeys[i] ||
+ rt_is_input_route(rt) ||
+ rt_is_expired(rt) ||
+ !net_eq(dev_net(rt->dst.dev), net) ||
+ rt->dst.error ||
+ rt->dst.dev != dev ||
+ rt->rt_gateway != old_gw)
+ continue;
- if (!rt->peer)
- rt_bind_peer(rt, rt->rt_dst, 1);
+ if (!rt->peer)
+ rt_bind_peer(rt, rt->rt_dst, 1);
- peer = rt->peer;
- if (peer) {
- peer->redirect_learned.a4 = new_gw;
- atomic_inc(&__rt_peer_genid);
+ peer = rt->peer;
+ if (peer) {
+ if (peer->redirect_learned.a4 != new_gw) {
+ peer->redirect_learned.a4 = new_gw;
+ atomic_inc(&__rt_peer_genid);
+ }
+ check_peer_redir(&rt->dst, peer);
+ }
}
-
- ip_rt_put(rt);
- return;
}
}
return;
}
}
-static int check_peer_redir(struct dst_entry *dst, struct inet_peer *peer)
-{
- struct rtable *rt = (struct rtable *) dst;
- __be32 orig_gw = rt->rt_gateway;
- struct neighbour *n, *old_n;
-
- dst_confirm(&rt->dst);
-
- rt->rt_gateway = peer->redirect_learned.a4;
-
- n = ipv4_neigh_lookup(&rt->dst, &rt->rt_gateway);
- if (IS_ERR(n))
- return PTR_ERR(n);
- old_n = xchg(&rt->dst._neighbour, n);
- if (old_n)
- neigh_release(old_n);
- if (!n || !(n->nud_state & NUD_VALID)) {
- if (n)
- neigh_event_send(n, NULL);
- rt->rt_gateway = orig_gw;
- return -EAGAIN;
- } else {
- rt->rt_flags |= RTCF_REDIRECTED;
- call_netevent_notifiers(NETEVENT_NEIGH_UPDATE, n);
- }
- return 0;
-}
static struct dst_entry *ipv4_dst_check(struct dst_entry *dst, u32 cookie)
{
struct rtable *rt = skb_rtable(skb);
struct rtmsg *r;
struct nlmsghdr *nlh;
- long expires = 0;
+ unsigned long expires = 0;
const struct inet_peer *peer = rt->peer;
u32 id = 0, ts = 0, tsage = 0, error;
tsage = get_seconds() - peer->tcp_ts_stamp;
}
expires = ACCESS_ONCE(peer->pmtu_expires);
- if (expires)
- expires -= jiffies;
+ if (expires) {
+ if (time_before(jiffies, expires))
+ expires -= jiffies;
+ else
+ expires = 0;
+ }
}
if (rt_is_input_route(rt)) {
#include <linux/random.h>
#include <linux/cryptohash.h>
#include <linux/kernel.h>
+#include <linux/export.h>
#include <net/tcp.h>
#include <net/route.h>
NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_LISTENDROPS);
return NULL;
put_and_exit:
+ tcp_clear_xmit_timers(newsk);
bh_unlock_sock(newsk);
sock_put(newsk);
goto exit;
/* Return 0, if packet can be sent now without violation Nagle's rules:
* 1. It is full sized.
* 2. Or it contains FIN. (already checked by caller)
- * 3. Or TCP_NODELAY was set.
+ * 3. Or TCP_CORK is not set, and TCP_NODELAY is set.
* 4. Or TCP_CORK is not set, and all sent packets are ACKed.
* With Minshall's modification: all sent small packets are ACKed.
*/
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/export.h>
#include "udp_impl.h"
struct udp_table udplite_table __read_mostly;
#include <linux/pfkeyv2.h>
#include <linux/ipsec.h>
#include <linux/netfilter_ipv4.h>
+#include <linux/export.h>
static int xfrm4_init_flags(struct xfrm_state *x)
{
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
+#include <linux/export.h>
/* Set to 3 to get tracing... */
#define ACONF_DEBUG 2
* not configured or static.
*/
+#include <linux/export.h>
#include <net/ipv6.h>
#define IPV6_ADDR_SCOPE_TYPE(scope) ((scope) << 16)
#endif
}
- err = ah->nexthdr;
-
kfree(AH_SKB_CB(skb)->tmp);
xfrm_output_resume(skb, err);
}
if (err)
goto out;
+ err = ah->nexthdr;
+
skb->network_header += ah_hlen;
memcpy(skb_network_header(skb), work_iph, hdr_len);
__skb_pull(skb, ah_hlen + hdr_len);
skb_set_transport_header(skb, -hdr_len);
-
- err = ah->nexthdr;
out:
kfree(AH_SKB_CB(skb)->tmp);
xfrm_input_resume(skb, err);
if (err == -EINPROGRESS)
goto out;
- if (err == -EBUSY)
- err = NET_XMIT_DROP;
goto out_free;
}
#include <linux/in6.h>
#include <linux/icmpv6.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <net/dst.h>
#include <net/sock.h>
* IPv6 library code, needed by static components when full IPv6 support is
* not configured or static.
*/
+#include <linux/export.h>
#include <net/ipv6.h>
/*
*/
#include <linux/netdevice.h>
+#include <linux/export.h>
#include <net/fib_rules.h>
#include <net/ipv6.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <net/net_namespace.h>
#include <net/sock.h>
ipv6_addr_loopback(&hdr->daddr))
goto err;
+ /*
+ * RFC4291 2.7
+ * Multicast addresses must not be used as source addresses in IPv6
+ * packets or appear in any Routing header.
+ */
+ if (ipv6_addr_is_multicast(&hdr->saddr))
+ goto err;
+
skb->transport_header = skb->network_header + sizeof(*hdr);
IP6CB(skb)->nhoff = offsetof(struct ipv6hdr, nexthdr);
if ((err = register_netdevice(dev)) < 0)
goto failed_free;
+ strcpy(t->parms.name, dev->name);
+
dev_hold(dev);
ip6_tnl_link(ip6n, t);
return t;
struct ip6_tnl *t = netdev_priv(dev);
t->dev = dev;
- strcpy(t->parms.name, dev->name);
dev->tstats = alloc_percpu(struct pcpu_tstats);
if (!dev->tstats)
return -ENOMEM;
static int __net_init ip6_tnl_init_net(struct net *net)
{
struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
+ struct ip6_tnl *t = NULL;
int err;
ip6n->tnls[0] = ip6n->tnls_wc;
err = register_netdev(ip6n->fb_tnl_dev);
if (err < 0)
goto err_register;
+
+ t = netdev_priv(ip6n->fb_tnl_dev);
+
+ strcpy(t->parms.name, ip6n->fb_tnl_dev->name);
return 0;
err_register:
#include <linux/pim.h>
#include <net/addrconf.h>
#include <linux/netfilter_ipv6.h>
+#include <linux/export.h>
#include <net/ip6_checksum.h>
struct mr6_table {
#include <linux/ipv6.h>
#include <linux/netfilter.h>
#include <linux/netfilter_ipv6.h>
+#include <linux/export.h>
#include <net/dst.h>
#include <net/ipv6.h>
#include <net/ip6_route.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/stddef.h>
+#include <linux/export.h>
#include <net/net_namespace.h>
#include <net/ip.h>
#include <net/sock.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
+#include <linux/export.h>
static struct raw_hashinfo raw_v6_hashinfo = {
.lock = __RW_LOCK_UNLOCKED(raw_v6_hashinfo.lock),
#include <linux/jhash.h>
#include <linux/skbuff.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <net/sock.h>
#include <net/snmp.h>
#include <linux/capability.h>
#include <linux/errno.h>
+#include <linux/export.h>
#include <linux/types.h>
#include <linux/times.h>
#include <linux/socket.h>
#include <linux/in6.h>
#include <linux/ipv6.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <net/ndisc.h>
#include <net/ipv6.h>
#include <net/addrconf.h>
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/export.h>
#include "udp_impl.h"
static int udplitev6_rcv(struct sk_buff *skb)
#include <linux/pfkeyv2.h>
#include <linux/ipsec.h>
#include <linux/netfilter_ipv6.h>
+#include <linux/export.h>
#include <net/dsfield.h>
#include <net/ipv6.h>
#include <net/addrconf.h>
#include <linux/proc_fs.h>
#include <linux/spinlock.h>
#include <linux/seq_file.h>
+#include <linux/export.h>
#include <net/net_namespace.h>
#include <net/tcp_states.h>
#include <net/ipx.h>
#include <linux/fs.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <net/irda/irda.h>
#include <net/irda/irlmp.h>
#include <linux/kmod.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <asm/ioctls.h>
#include <asm/uaccess.h>
#include <linux/fs.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <asm/byteorder.h>
#include <asm/unaligned.h>
*
********************************************************************/
+#include <linux/export.h>
+
#include <asm/byteorder.h>
#include <net/irda/irda.h>
goto error;
}
- /* Point to L2TP header */
- optr = ptr = skb->data;
-
/* Trace packet contents, if enabled */
if (tunnel->debug & L2TP_MSG_DATA) {
length = min(32u, skb->len);
offset = 0;
do {
- printk(" %02X", ptr[offset]);
+ printk(" %02X", skb->data[offset]);
} while (++offset < length);
printk("\n");
}
+ /* Point to L2TP header */
+ optr = ptr = skb->data;
+
/* Get L2TP header flags */
hdrflags = ntohs(*(__be16 *) ptr);
*/
#include <linux/netdevice.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <net/net_namespace.h>
#include <net/llc.h>
#include <net/llc_pdu.h>
#include <linux/netdevice.h>
#include <linux/trdevice.h>
#include <linux/skbuff.h>
+#include <linux/export.h>
#include <net/llc.h>
#include <net/llc_pdu.h>
#include <linux/proc_fs.h>
#include <linux/errno.h>
#include <linux/seq_file.h>
+#include <linux/export.h>
#include <net/net_namespace.h>
#include <net/sock.h>
#include <net/llc.h>
#include <linux/ieee80211.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <net/mac80211.h>
#include "ieee80211_i.h"
#include "driver-ops.h"
#include <linux/ieee80211.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <net/mac80211.h>
#include "ieee80211_i.h"
#include "driver-ops.h"
if (is_multicast_ether_addr(mac))
return -EINVAL;
+ /* Only TDLS-supporting stations can add TDLS peers */
+ if ((params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER)) &&
+ !((wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS) &&
+ sdata->vif.type == NL80211_IFTYPE_STATION))
+ return -ENOTSUPP;
+
sta = sta_info_alloc(sdata, mac, GFP_KERNEL);
if (!sta)
return -ENOMEM;
sta_apply_parameters(local, sta, params);
- /* Only TDLS-supporting stations can add TDLS peers */
- if (test_sta_flag(sta, WLAN_STA_TDLS_PEER) &&
- !((wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS) &&
- sdata->vif.type == NL80211_IFTYPE_STATION))
- return -ENOTSUPP;
-
rate_control_rate_init(sta);
layer2_update = sdata->vif.type == NL80211_IFTYPE_AP_VLAN ||
*/
#include <linux/ieee80211.h>
+#include <linux/export.h>
#include <net/mac80211.h>
#include "ieee80211_i.h"
#include "rate.h"
unsigned long timers_running; /* used for quiesce/restart */
bool powersave; /* powersave requested for this iface */
+ bool broken_ap; /* AP is broken -- turn off powersave */
enum ieee80211_smps_mode req_smps, /* requested smps mode */
ap_smps, /* smps mode AP thinks we're in */
driver_smps_mode; /* smps mode request */
#include <linux/rcupdate.h>
#include <linux/rtnetlink.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <net/mac80211.h>
#include "ieee80211_i.h"
#include "driver-ops.h"
/* just for IFNAMSIZ */
#include <linux/if.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include "led.h"
void ieee80211_led_rx(struct ieee80211_local *local)
#include <linux/skbuff.h>
#include <linux/if_arp.h>
#include <linux/etherdevice.h>
+#include <linux/moduleparam.h>
#include <linux/rtnetlink.h>
#include <linux/pm_qos.h>
#include <linux/crc32.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <net/mac80211.h>
#include <asm/unaligned.h>
if (!mgd->powersave)
return false;
+ if (mgd->broken_ap)
+ return false;
+
if (!mgd->associated)
return false;
int i, j, err;
bool have_higher_than_11mbit = false;
u16 ap_ht_cap_flags;
+ int min_rate = INT_MAX, min_rate_index = -1;
/* AssocResp and ReassocResp have identical structure */
capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
if ((aid & (BIT(15) | BIT(14))) != (BIT(15) | BIT(14)))
- printk(KERN_DEBUG "%s: invalid aid value %d; bits 15:14 not "
- "set\n", sdata->name, aid);
+ printk(KERN_DEBUG
+ "%s: invalid AID value 0x%x; bits 15:14 not set\n",
+ sdata->name, aid);
aid &= ~(BIT(15) | BIT(14));
+ ifmgd->broken_ap = false;
+
+ if (aid == 0 || aid > IEEE80211_MAX_AID) {
+ printk(KERN_DEBUG
+ "%s: invalid AID value %d (out of range), turn off PS\n",
+ sdata->name, aid);
+ aid = 0;
+ ifmgd->broken_ap = true;
+ }
+
pos = mgmt->u.assoc_resp.variable;
ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems);
rates |= BIT(j);
if (is_basic)
basic_rates |= BIT(j);
+ if (rate < min_rate) {
+ min_rate = rate;
+ min_rate_index = j;
+ }
break;
}
}
rates |= BIT(j);
if (is_basic)
basic_rates |= BIT(j);
+ if (rate < min_rate) {
+ min_rate = rate;
+ min_rate_index = j;
+ }
break;
}
}
}
+ /*
+ * some buggy APs don't advertise basic_rates. use the lowest
+ * supported rate instead.
+ */
+ if (unlikely(!basic_rates) && min_rate_index >= 0) {
+ printk(KERN_DEBUG "%s: No basic rates in AssocResp. "
+ "Using min supported rate instead.\n", sdata->name);
+ basic_rates = BIT(min_rate_index);
+ }
+
sta->sta.supp_rates[wk->chan->band] = rates;
sdata->vif.bss_conf.basic_rates = basic_rates;
cancel_work_sync(&ifmgd->request_smps_work);
+ cancel_work_sync(&ifmgd->monitor_work);
cancel_work_sync(&ifmgd->beacon_connection_loss_work);
if (del_timer_sync(&ifmgd->timer))
set_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running);
if (del_timer_sync(&ifmgd->chswitch_timer))
set_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running);
- cancel_work_sync(&ifmgd->monitor_work);
/* these will just be re-established on connection */
del_timer_sync(&ifmgd->conn_mon_timer);
del_timer_sync(&ifmgd->bcn_mon_timer);
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/export.h>
#include <net/mac80211.h>
#include "ieee80211_i.h"
#include "driver-trace.h"
#include <linux/kernel.h>
#include <linux/rtnetlink.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include "rate.h"
#include "ieee80211_i.h"
#include "debugfs.h"
#include <linux/debugfs.h>
#include <linux/ieee80211.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <net/mac80211.h>
#include "rc80211_minstrel.h"
#include <linux/skbuff.h>
#include <linux/debugfs.h>
#include <linux/ieee80211.h>
+#include <linux/export.h>
#include <net/mac80211.h>
#include "rc80211_minstrel.h"
#include "rc80211_minstrel_ht.h"
#include <linux/types.h>
#include <linux/skbuff.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <net/mac80211.h>
#include "rate.h"
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/rcupdate.h>
+#include <linux/export.h>
#include <net/mac80211.h>
#include <net/ieee80211_radiotap.h>
pos++;
/* IEEE80211_RADIOTAP_RATE */
- if (status->flag & RX_FLAG_HT) {
+ if (!rate || status->flag & RX_FLAG_HT) {
/*
+ * Without rate information don't add it. If we have,
* MCS information is a separate field in radiotap,
* added below. The byte here is needed as padding
* for the channel though, so initialise it to 0.
else if (status->flag & RX_FLAG_HT)
put_unaligned_le16(IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ,
pos);
- else if (rate->flags & IEEE80211_RATE_ERP_G)
+ else if (rate && rate->flags & IEEE80211_RATE_ERP_G)
put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_2GHZ,
pos);
- else
+ else if (rate)
put_unaligned_le16(IEEE80211_CHAN_CCK | IEEE80211_CHAN_2GHZ,
pos);
+ else
+ put_unaligned_le16(IEEE80211_CHAN_2GHZ, pos);
pos += 2;
/* IEEE80211_RADIOTAP_DBM_ANTSIGNAL */
#include <linux/pm_qos.h>
#include <net/sch_generic.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <net/mac80211.h>
#include "ieee80211_i.h"
* Use MoreData flag to indicate whether there are
* more buffered frames for this STA
*/
- if (!more_data)
- hdr->frame_control &=
- cpu_to_le16(~IEEE80211_FCTL_MOREDATA);
- else
+ if (more_data || !skb_queue_empty(&frames))
hdr->frame_control |=
cpu_to_le16(IEEE80211_FCTL_MOREDATA);
+ else
+ hdr->frame_control &=
+ cpu_to_le16(~IEEE80211_FCTL_MOREDATA);
if (ieee80211_is_data_qos(hdr->frame_control) ||
ieee80211_is_qos_nullfunc(hdr->frame_control))
* published by the Free Software Foundation.
*/
+#include <linux/export.h>
#include <net/mac80211.h>
#include "ieee80211_i.h"
#include "rate.h"
#include <linux/bitops.h>
#include <linux/types.h>
#include <linux/netdevice.h>
+#include <linux/export.h>
#include <asm/unaligned.h>
#include <net/mac80211.h>
#include <linux/etherdevice.h>
#include <linux/bitmap.h>
#include <linux/rcupdate.h>
+#include <linux/export.h>
#include <net/net_namespace.h>
#include <net/ieee80211_radiotap.h>
#include <net/cfg80211.h>
#include <net/mac80211.h>
#include <linux/netdevice.h>
+#include <linux/export.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/skbuff.h>
skb = ieee80211_probereq_get(&local->hw, &sdata->vif,
ssid, ssid_len,
buf, buf_len);
+ if (!skb)
+ goto out;
if (dst) {
mgmt = (struct ieee80211_mgmt *) skb->data;
}
IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
+
+ out:
kfree(buf);
return skb;
continue;
if (wk->chan != local->tmp_channel)
continue;
- if (ieee80211_work_ct_coexists(wk->chan_type,
- local->tmp_channel_type))
+ if (!ieee80211_work_ct_coexists(wk->chan_type,
+ local->tmp_channel_type))
continue;
remain_off_channel = true;
}
if (!remain_off_channel && local->tmp_channel) {
- bool on_oper_chan = ieee80211_cfg_on_oper_channel(local);
local->tmp_channel = NULL;
/* If tmp_channel wasn't operating channel, then
* we need to go back on-channel.
* we still need to do a hardware config. Currently,
* we cannot be here while scanning, however.
*/
- if (ieee80211_cfg_on_oper_channel(local) && !on_oper_chan)
+ if (!ieee80211_cfg_on_oper_channel(local))
ieee80211_hw_config(local, 0);
/* At the least, we need to disable offchannel_ps,
#include <net/ipv6.h>
#include <linux/netfilter/ipset/ip_set_getport.h>
+#include <linux/export.h>
/* We must handle non-linear skbs */
static bool
+#include <linux/export.h>
#include <linux/netfilter/ipset/pfxlen.h>
/*
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/moduleparam.h>
+#include <linux/export.h>
#include <net/netfilter/nf_conntrack.h>
#include <net/netfilter/nf_conntrack_extend.h>
#include <linux/kernel.h>
#include <linux/netdevice.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <net/netfilter/nf_conntrack.h>
#include <net/netfilter/nf_conntrack_core.h>
#include <linux/percpu.h>
#include <linux/kernel.h>
#include <linux/jhash.h>
+#include <linux/moduleparam.h>
+#include <linux/export.h>
#include <net/net_namespace.h>
#include <net/netfilter/nf_conntrack.h>
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/socket.h>
#include <linux/net.h>
#include <linux/proc_fs.h>
#include <linux/netfilter/x_tables.h>
#include <linux/netfilter/xt_quota.h>
+#include <linux/module.h>
struct xt_quota_priv {
spinlock_t lock;
#include <linux/netfilter/xt_statistic.h>
#include <linux/netfilter/x_tables.h>
+#include <linux/module.h>
struct xt_statistic_priv {
atomic_t count;
#include <linux/spinlock.h>
#include <net/netrom.h>
#include <linux/seq_file.h>
+#include <linux/export.h>
static unsigned int nr_neigh_no = 1;
*/
#include <linux/nfc.h>
+#include <linux/module.h>
#include "nfc.h"
#include <linux/types.h>
#include <linux/workqueue.h>
#include <linux/completion.h>
+#include <linux/export.h>
#include <linux/sched.h>
#include <linux/bitops.h>
#include <linux/skbuff.h>
#include <net/tcp_states.h>
#include <linux/nfc.h>
+#include <linux/export.h>
#include "nfc.h"
#include <net/sock.h>
#include <linux/phonet.h>
+#include <linux/export.h>
#include <net/phonet/phonet.h>
static int pn_backlog_rcv(struct sock *sk, struct sk_buff *skb);
#include <asm/ioctls.h>
#include <linux/phonet.h>
+#include <linux/module.h>
#include <net/phonet/phonet.h>
#include <net/phonet/pep.h>
#include <net/phonet/gprs.h>
#include <net/tcp_states.h>
#include <linux/phonet.h>
+#include <linux/export.h>
#include <net/phonet/phonet.h>
#include <net/phonet/pep.h>
#include <net/phonet/pn_dev.h>
config RDS_RDMA
tristate "RDS over Infiniband and iWARP"
- select LLIST
depends on RDS && INFINIBAND && INFINIBAND_ADDR_TRANS
---help---
Allow RDS to use Infiniband and iWARP as a transport.
#include <linux/types.h>
#include <linux/rbtree.h>
#include <linux/bitops.h>
+#include <linux/export.h>
#include "rds.h"
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <net/inet_hashtables.h>
#include "rds.h"
#include <linux/if_arp.h>
#include <linux/delay.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include "rds.h"
#include "ib.h"
#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/proc_fs.h>
+#include <linux/export.h>
#include "rds.h"
#include <linux/if_arp.h>
#include <linux/delay.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include "rds.h"
#include "iw.h"
*/
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include "rds.h"
#include <linux/highmem.h>
#include <linux/gfp.h>
#include <linux/cpu.h>
+#include <linux/export.h>
#include "rds.h"
* SOFTWARE.
*
*/
+#include <linux/module.h>
#include <rdma/rdma_cm.h>
#include "rdma_transport.h"
#include <linux/slab.h>
#include <net/sock.h>
#include <linux/in.h>
+#include <linux/export.h>
#include "rds.h"
*
*/
#include <linux/kernel.h>
+#include <linux/moduleparam.h>
#include <linux/gfp.h>
#include <net/sock.h>
#include <linux/in.h>
#include <linux/list.h>
#include <linux/ratelimit.h>
+#include <linux/export.h>
#include "rds.h"
#include <linux/percpu.h>
#include <linux/seq_file.h>
#include <linux/proc_fs.h>
+#include <linux/export.h>
#include "rds.h"
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/in.h>
+#include <linux/module.h>
#include <net/tcp.h>
#include "rds.h"
*/
#include <linux/kernel.h>
#include <linux/random.h>
+#include <linux/export.h>
#include "rds.h"
#include <linux/input.h>
#include <linux/slab.h>
+#include <linux/moduleparam.h>
#include <linux/workqueue.h>
#include <linux/init.h>
#include <linux/rfkill.h>
#include <linux/init.h>
#include <net/rose.h>
#include <linux/seq_file.h>
+#include <linux/export.h>
static unsigned int rose_neigh_no = 1;
#include <linux/gfp.h>
#include <linux/skbuff.h>
#include <linux/circ_buf.h>
+#include <linux/export.h>
#include <net/sock.h>
#include <net/af_rxrpc.h>
#include "ar-internal.h"
#include <linux/net.h>
#include <linux/skbuff.h>
+#include <linux/export.h>
#include <net/sock.h>
#include <net/af_rxrpc.h>
#include "ar-internal.h"
#include <linux/init.h>
#include <linux/kmod.h>
#include <linux/err.h>
+#include <linux/module.h>
#include <net/net_namespace.h>
#include <net/sock.h>
#include <net/sch_generic.h>
#include <linux/ipv6.h>
#include <linux/if_vlan.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <net/pkt_cls.h>
#include <net/ip.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/skbuff.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/skbuff.h>
+#include <linux/module.h>
#include <net/netlink.h>
#include <net/pkt_sched.h>
#include <net/sch_generic.h>
#include <linux/types.h>
#include <linux/seq_file.h>
#include <linux/init.h>
+#include <linux/export.h>
#include <net/sctp/sctp.h>
#include <net/ip.h> /* for snmp_fold_field */
#include <net/inet_common.h>
#include <linux/socket.h> /* for sa_family_t */
+#include <linux/export.h>
#include <net/sock.h>
#include <net/sctp/sctp.h>
#include <net/sctp/sm.h>
#include <net/ipv6.h>
#include <linux/sunrpc/clnt.h>
#include <linux/slab.h>
+#include <linux/export.h>
#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
#include <linux/tcp.h>
#include <linux/slab.h>
#include <linux/sunrpc/xprt.h>
+#include <linux/export.h>
#ifdef RPC_DEBUG
#define RPCDBG_FACILITY RPCDBG_TRANS
#include <linux/pagemap.h>
#include <linux/udp.h>
#include <linux/sunrpc/xdr.h>
+#include <linux/export.h>
/**
#include <linux/sunrpc/svc_xprt.h>
#include <linux/sunrpc/svcsock.h>
#include <linux/sunrpc/xprt.h>
+#include <linux/module.h>
#define RPCDBG_FACILITY RPCDBG_SVCXPRT
#include <linux/kernel.h>
#include <linux/sched.h>
+#include <linux/module.h>
#include <linux/errno.h>
#include <linux/fcntl.h>
#include <linux/net.h>
#include <rdma/ib_verbs.h>
#include <rdma/rdma_cm.h>
#include <linux/sunrpc/svc_rdma.h>
+#include <linux/export.h>
#define RPCDBG_FACILITY RPCDBG_SVCXPRT
*/
#include <linux/mm.h>
+#include <linux/export.h>
#include <linux/sysctl.h>
#include <linux/nsproxy.h>
* POSSIBILITY OF SUCH DAMAGE.
*/
+#include <linux/module.h>
+
#include "core.h"
#include "ref.h"
#include "name_table.h"
* POSSIBILITY OF SUCH DAMAGE.
*/
+#include <linux/export.h>
#include <net/sock.h>
#include "core.h"
* Iterator
*/
static void *r_start(struct seq_file *m, loff_t *pos)
- __acquires(kernel_lock)
{
struct wan_device *wandev;
loff_t l = *pos;
}
static void r_stop(struct seq_file *m, void *v)
- __releases(kernel_lock)
{
mutex_unlock(&config_mutex);
}
#include <linux/netdevice.h>
#include <linux/wimax.h>
#include <linux/security.h>
+#include <linux/export.h>
#include "wimax-internal.h"
#include <net/genetlink.h>
#include <linux/wimax.h>
#include <linux/security.h>
+#include <linux/export.h>
#include "wimax-internal.h"
#define D_SUBMODULE op_reset
#include <linux/wimax.h>
#include <linux/security.h>
#include <linux/rfkill.h>
+#include <linux/export.h>
#include "wimax-internal.h"
#define D_SUBMODULE op_rfkill
#include <net/genetlink.h>
#include <linux/netdevice.h>
#include <linux/wimax.h>
+#include <linux/module.h>
#include "wimax-internal.h"
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <net/cfg80211.h>
#include "wext-compat.h"
#include "nl80211.h"
#include <linux/ieee80211.h>
+#include <linux/export.h>
#include <net/cfg80211.h>
#include "nl80211.h"
#include "core.h"
[NL80211_ATTR_MESH_CONFIG] = { .type = NLA_NESTED },
[NL80211_ATTR_SUPPORT_MESH_AUTH] = { .type = NLA_FLAG },
- [NL80211_ATTR_HT_CAPABILITY] = { .type = NLA_BINARY,
- .len = NL80211_HT_CAPABILITY_LEN },
+ [NL80211_ATTR_HT_CAPABILITY] = { .len = NL80211_HT_CAPABILITY_LEN },
[NL80211_ATTR_MGMT_SUBTYPE] = { .type = NLA_U8 },
[NL80211_ATTR_IE] = { .type = NLA_BINARY,
goto bad_res;
}
+ if (netdev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
+ netdev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO) {
+ result = -EINVAL;
+ goto bad_res;
+ }
+
nla_for_each_nested(nl_txq_params,
info->attrs[NL80211_ATTR_WIPHY_TXQ_PARAMS],
rem_txq_params) {
*/
#include <linux/kernel.h>
+#include <linux/export.h>
#include <net/cfg80211.h>
#include <net/ieee80211_radiotap.h>
#include <asm/unaligned.h>
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/random.h>
#include <linux/ctype.h>
#include <linux/nl80211.h>
#include <linux/platform_device.h>
+#include <linux/moduleparam.h>
#include <net/cfg80211.h>
#include "core.h"
#include "reg.h"
kfree(last_request);
+ last_request = NULL;
+ dev_set_uevent_suppress(®_pdev->dev, true);
+
platform_device_unregister(reg_pdev);
spin_lock_bh(®_pending_beacons_lock);
{
const u8 *ie1 = cfg80211_find_ie(num, ies1, len1);
const u8 *ie2 = cfg80211_find_ie(num, ies2, len2);
- int r;
+ /* equal if both missing */
if (!ie1 && !ie2)
return 0;
- if (!ie1 || !ie2)
+ /* sort missing IE before (left of) present IE */
+ if (!ie1)
return -1;
+ if (!ie2)
+ return 1;
- r = memcmp(ie1 + 2, ie2 + 2, min(ie1[1], ie2[1]));
- if (r == 0 && ie1[1] != ie2[1])
+ /* sort by length first, then by contents */
+ if (ie1[1] != ie2[1])
return ie2[1] - ie1[1];
- return r;
+ return memcmp(ie1 + 2, ie2 + 2, ie1[1]);
}
static bool is_bss(struct cfg80211_bss *a,
#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/wireless.h>
+#include <linux/export.h>
#include <net/iw_handler.h>
#include <net/cfg80211.h>
#include <net/rtnetlink.h>
*
* Copyright 2007-2009 Johannes Berg <johannes@sipsolutions.net>
*/
+#include <linux/export.h>
#include <linux/bitops.h>
#include <linux/etherdevice.h>
#include <linux/slab.h>
* Copyright 2008-2009 Johannes Berg <johannes@sipsolutions.net>
*/
+#include <linux/export.h>
#include <linux/wireless.h>
#include <linux/nl80211.h>
#include <linux/if_arp.h>
#include <linux/slab.h>
#include <linux/wireless.h>
#include <linux/uaccess.h>
+#include <linux/export.h>
#include <net/cfg80211.h>
#include <net/iw_handler.h>
#include <net/netlink.h>
* Copyright (C) 2009 Intel Corporation. All rights reserved.
*/
+#include <linux/export.h>
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
#include <linux/slab.h>
#include <linux/wireless.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
+#include <linux/export.h>
#include <net/iw_handler.h>
#include <net/arp.h>
#include <net/wext.h>
#include <linux/init.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
+#include <linux/export.h>
#include <net/net_namespace.h>
#include <net/sock.h>
#include <net/x25.h>
*/
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
+#include <linux/export.h>
#include <net/snmp.h>
#include <net/xfrm.h>
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*/
+#include <linux/export.h>
#include <net/xfrm.h>
u32 xfrm_replay_seqhi(struct xfrm_state *x, __be32 net_seq)
Build an example of how to dynamically add the hello
command to the kdb shell.
-config SAMPLE_HIDRAW
- bool "Build simple hidraw example"
- depends on HIDRAW && HEADERS_CHECK
- help
- Build an example of how to use hidraw from userspace.
-
endif # SAMPLES
# If the save-* variables changed error out
ifeq ($(KBUILD_NOPEDANTIC),)
ifneq ("$(save-cflags)","$(CFLAGS)")
- $(error CFLAGS was changed in "$(kbuild-file)". Fix it to use EXTRA_CFLAGS)
+ $(error CFLAGS was changed in "$(kbuild-file)". Fix it to use ccflags-y)
endif
endif
quiet_cmd_gperf = GPERF $@
cmd_gperf = gperf -t --output-file $@ -a -C -E -g -k 1,3,$$ -p -t $<
+.PRECIOUS: $(src)/%.hash.c_shipped
$(src)/%.hash.c_shipped: $(src)/%.gperf
$(call cmd,gperf)
quiet_cmd_flex = LEX $@
cmd_flex = flex -o$@ -L -P $(LEX_PREFIX) $<
+.PRECIOUS: $(src)/%.lex.c_shipped
$(src)/%.lex.c_shipped: $(src)/%.l
$(call cmd,flex)
quiet_cmd_bison = YACC $@
cmd_bison = bison -o$@ -t -l -p $(YACC_PREFIX) $<
+.PRECIOUS: $(src)/%.tab.c_shipped
$(src)/%.tab.c_shipped: $(src)/%.y
$(call cmd,bison)
quiet_cmd_bison_h = YACC $@
cmd_bison_h = bison -o/dev/null --defines=$@ -t -l -p $(YACC_PREFIX) $<
+.PRECIOUS: $(src)/%.tab.h_shipped
$(src)/%.tab.h_shipped: $(src)/%.y
$(call cmd,bison_h)
memcpy(s, m, p-m); s[p-m] = 0;
if (strrcmp(s, "include/generated/autoconf.h") &&
strrcmp(s, "arch/um/include/uml-config.h") &&
+ strrcmp(s, "include/linux/kconfig.h") &&
strrcmp(s, ".ver")) {
/*
* Do not list the source file as dependency, so that
#print "is_end<$is_end> length<$length>\n";
}
+ if (($realfile =~ /Makefile.*/ || $realfile =~ /Kbuild.*/) &&
+ ($line =~ /\+(EXTRA_[A-Z]+FLAGS).*/)) {
+ my $flag = $1;
+ my $replacement = {
+ 'EXTRA_AFLAGS' => 'asflags-y',
+ 'EXTRA_CFLAGS' => 'ccflags-y',
+ 'EXTRA_CPPFLAGS' => 'cppflags-y',
+ 'EXTRA_LDFLAGS' => 'ldflags-y',
+ };
+
+ WARN("DEPRECATED_VARIABLE",
+ "Use of $flag is deprecated, please use \`$replacement->{$flag} instead.\n" . $herecurr) if ($replacement->{$flag});
+ }
+
# check we are in a valid source file if not then ignore this hunk
next if ($realfile !~ /\.(h|c|s|S|pl|sh)$/);
--- /dev/null
+#!/bin/sh
+# ----------------------------------------------------------------------
+# extract-vmlinux - Extract uncompressed vmlinux from a kernel image
+#
+# Inspired from extract-ikconfig
+# (c) 2009,2010 Dick Streefland <dick@streefland.net>
+#
+# (c) 2011 Corentin Chary <corentin.chary@gmail.com>
+#
+# Licensed under the GNU General Public License, version 2 (GPLv2).
+# ----------------------------------------------------------------------
+
+check_vmlinux()
+{
+ # Use readelf to check if it's a valid ELF
+ # TODO: find a better to way to check that it's really vmlinux
+ # and not just an elf
+ readelf -h $1 > /dev/null 2>&1 || return 1
+
+ cat $1
+ exit 0
+}
+
+try_decompress()
+{
+ # The obscure use of the "tr" filter is to work around older versions of
+ # "grep" that report the byte offset of the line instead of the pattern.
+
+ # Try to find the header ($1) and decompress from here
+ for pos in `tr "$1\n$2" "\n$2=" < "$img" | grep -abo "^$2"`
+ do
+ pos=${pos%%:*}
+ tail -c+$pos "$img" | $3 > $tmp 2> /dev/null
+ check_vmlinux $tmp
+ done
+}
+
+# Check invocation:
+me=${0##*/}
+img=$1
+if [ $# -ne 1 -o ! -s "$img" ]
+then
+ echo "Usage: $me <kernel-image>" >&2
+ exit 2
+fi
+
+# Prepare temp files:
+tmp=$(mktemp /tmp/vmlinux-XXX)
+trap "rm -f $tmp" 0
+
+# Initial attempt for uncompressed images or objects:
+check_vmlinux $img
+
+# That didn't work, so retry after decompression.
+try_decompress '\037\213\010' xy gunzip
+try_decompress '\3757zXZ\000' abcde unxz
+try_decompress 'BZh' xy bunzip2
+try_decompress '\135\0\0\0' xxx unlzma
+try_decompress '\211\114\132' xy 'lzop -d'
+
+# Bail out:
+echo "$me: Cannot find vmlinux." >&2
static FILE *debugfile;
int cur_line = 1;
-char *cur_filename;
+char *cur_filename, *source_file;
+int in_source_file;
static int flag_debug, flag_dump_defs, flag_reference, flag_dump_types,
flag_preserve, flag_warnings;
struct string_list {
struct string_list *next;
enum symbol_type tag;
+ int in_source_file;
char *string;
};
#define YYSTYPE yystype
extern int cur_line;
-extern char *cur_filename;
+extern char *cur_filename, *source_file;
+extern int in_source_file;
struct symbol *find_symbol(const char *name, enum symbol_type ns, int exact);
struct symbol *add_symbol(const char *name, enum symbol_type type,
cur_node->tag = \
find_symbol(cur_node->string, SYM_ENUM_CONST, 1)?\
SYM_ENUM_CONST : SYM_NORMAL ; \
+ cur_node->in_source_file = in_source_file; \
} while (0)
#define APP _APP(yytext, yyleng)
cur_filename = memcpy(xmalloc(e-file+1), file, e-file+1);
cur_line = atoi(yytext+2);
+ if (!source_file) {
+ source_file = xstrdup(cur_filename);
+ in_source_file = 1;
+ } else {
+ in_source_file = (strcmp(cur_filename, source_file) == 0);
+ }
+
goto repeat;
}
/* This used to be an fputs(), but since the string might contain NUL's,
* we now use fwrite().
*/
-#define ECHO do { if (fwrite( yytext, yyleng, 1, yyout )) {} } while (0)
+#define ECHO fwrite( yytext, yyleng, 1, yyout )
#endif
/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
{ \
int c = '*'; \
- unsigned n; \
+ int n; \
for ( n = 0; n < max_size && \
(c = getc( yyin )) != EOF && c != '\n'; ++n ) \
buf[n] = (char) c; \
cur_node->tag = \
find_symbol(cur_node->string, SYM_ENUM_CONST, 1)?\
SYM_ENUM_CONST : SYM_NORMAL ; \
+ cur_node->in_source_file = in_source_file; \
} while (0)
#define APP _APP(yytext, yyleng)
cur_filename = memcpy(xmalloc(e-file+1), file, e-file+1);
cur_line = atoi(yytext+2);
+ if (!source_file) {
+ source_file = xstrdup(cur_filename);
+ in_source_file = 1;
+ } else {
+ in_source_file = (strcmp(cur_filename, source_file) == 0);
+ }
+
goto repeat;
}
-/* A Bison parser, made by GNU Bison 2.4.3. */
+/* A Bison parser, made by GNU Bison 2.5. */
-/* Skeleton implementation for Bison's Yacc-like parsers in C
+/* Bison implementation for Yacc-like parsers in C
- Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
- 2009, 2010 Free Software Foundation, Inc.
+ Copyright (C) 1984, 1989-1990, 2000-2011 Free Software Foundation, Inc.
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
#define YYBISON 1
/* Bison version. */
-#define YYBISON_VERSION "2.4.3"
+#define YYBISON_VERSION "2.5"
/* Skeleton name. */
#define YYSKELETON_NAME "yacc.c"
free_list(b, e);
}
+/* Record definition of a struct/union/enum */
+static void record_compound(struct string_list **keyw,
+ struct string_list **ident,
+ struct string_list **body,
+ enum symbol_type type)
+{
+ struct string_list *b = *body, *i = *ident, *r;
+
+ if (i->in_source_file) {
+ remove_node(keyw);
+ (*ident)->tag = type;
+ remove_list(body, ident);
+ return;
+ }
+ r = copy_node(i); r->tag = type;
+ r->next = (*keyw)->next; *body = r; (*keyw)->next = NULL;
+ add_symbol(i->string, type, b, is_extern);
+}
+
# define alloca _alloca
# else
# define YYSTACK_ALLOC alloca
-# if ! defined _ALLOCA_H && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \
+# if ! defined _ALLOCA_H && ! defined EXIT_SUCCESS && (defined __STDC__ || defined __C99__FUNC__ \
|| defined __cplusplus || defined _MSC_VER)
# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
-# ifndef _STDLIB_H
-# define _STDLIB_H 1
+# ifndef EXIT_SUCCESS
+# define EXIT_SUCCESS 0
# endif
# endif
# endif
# ifndef YYSTACK_ALLOC_MAXIMUM
# define YYSTACK_ALLOC_MAXIMUM YYSIZE_MAXIMUM
# endif
-# if (defined __cplusplus && ! defined _STDLIB_H \
+# if (defined __cplusplus && ! defined EXIT_SUCCESS \
&& ! ((defined YYMALLOC || defined malloc) \
&& (defined YYFREE || defined free)))
# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
-# ifndef _STDLIB_H
-# define _STDLIB_H 1
+# ifndef EXIT_SUCCESS
+# define EXIT_SUCCESS 0
# endif
# endif
# ifndef YYMALLOC
# define YYMALLOC malloc
-# if ! defined malloc && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \
+# if ! defined malloc && ! defined EXIT_SUCCESS && (defined __STDC__ || defined __C99__FUNC__ \
|| defined __cplusplus || defined _MSC_VER)
void *malloc (YYSIZE_T); /* INFRINGES ON USER NAME SPACE */
# endif
# endif
# ifndef YYFREE
# define YYFREE free
-# if ! defined free && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \
+# if ! defined free && ! defined EXIT_SUCCESS && (defined __STDC__ || defined __C99__FUNC__ \
|| defined __cplusplus || defined _MSC_VER)
void free (void *); /* INFRINGES ON USER NAME SPACE */
# endif
((N) * (sizeof (yytype_int16) + sizeof (YYSTYPE)) \
+ YYSTACK_GAP_MAXIMUM)
-/* Copy COUNT objects from FROM to TO. The source and destination do
- not overlap. */
-# ifndef YYCOPY
-# if defined __GNUC__ && 1 < __GNUC__
-# define YYCOPY(To, From, Count) \
- __builtin_memcpy (To, From, (Count) * sizeof (*(From)))
-# else
-# define YYCOPY(To, From, Count) \
- do \
- { \
- YYSIZE_T yyi; \
- for (yyi = 0; yyi < (Count); yyi++) \
- (To)[yyi] = (From)[yyi]; \
- } \
- while (YYID (0))
-# endif
-# endif
+# define YYCOPY_NEEDED 1
/* Relocate STACK from its old location to the new one. The
local variables YYSIZE and YYSTACKSIZE give the old and new number of
#endif
+#if defined YYCOPY_NEEDED && YYCOPY_NEEDED
+/* Copy COUNT objects from FROM to TO. The source and destination do
+ not overlap. */
+# ifndef YYCOPY
+# if defined __GNUC__ && 1 < __GNUC__
+# define YYCOPY(To, From, Count) \
+ __builtin_memcpy (To, From, (Count) * sizeof (*(From)))
+# else
+# define YYCOPY(To, From, Count) \
+ do \
+ { \
+ YYSIZE_T yyi; \
+ for (yyi = 0; yyi < (Count); yyi++) \
+ (To)[yyi] = (From)[yyi]; \
+ } \
+ while (YYID (0))
+# endif
+# endif
+#endif /* !YYCOPY_NEEDED */
+
/* YYFINAL -- State number of the termination state. */
#define YYFINAL 4
/* YYLAST -- Last index in YYTABLE. */
/* YYRLINE[YYN] -- source line where rule number YYN was defined. */
static const yytype_uint16 yyrline[] =
{
- 0, 104, 104, 105, 109, 109, 115, 115, 117, 117,
- 119, 120, 121, 122, 123, 124, 128, 142, 143, 147,
- 155, 168, 174, 175, 179, 180, 184, 190, 194, 195,
- 196, 197, 198, 202, 203, 204, 205, 209, 211, 213,
- 217, 224, 231, 241, 244, 245, 249, 250, 251, 252,
- 253, 254, 255, 256, 257, 258, 259, 263, 268, 269,
- 273, 274, 278, 278, 278, 279, 287, 288, 292, 301,
- 303, 305, 307, 309, 316, 317, 321, 322, 323, 325,
- 327, 329, 331, 336, 337, 338, 342, 343, 347, 348,
- 353, 358, 360, 364, 365, 373, 377, 379, 381, 383,
- 385, 390, 399, 400, 405, 410, 411, 415, 416, 420,
- 421, 425, 427, 432, 433, 437, 438, 442, 443, 444,
- 448, 452, 453, 457, 458, 462, 463, 466, 471, 479,
- 483, 484, 488
+ 0, 123, 123, 124, 128, 128, 134, 134, 136, 136,
+ 138, 139, 140, 141, 142, 143, 147, 161, 162, 166,
+ 174, 187, 193, 194, 198, 199, 203, 209, 213, 214,
+ 215, 216, 217, 221, 222, 223, 224, 228, 230, 232,
+ 236, 238, 240, 245, 248, 249, 253, 254, 255, 256,
+ 257, 258, 259, 260, 261, 262, 263, 267, 272, 273,
+ 277, 278, 282, 282, 282, 283, 291, 292, 296, 305,
+ 307, 309, 311, 313, 320, 321, 325, 326, 327, 329,
+ 331, 333, 335, 340, 341, 342, 346, 347, 351, 352,
+ 357, 362, 364, 368, 369, 377, 381, 383, 385, 387,
+ 389, 394, 403, 404, 409, 414, 415, 419, 420, 424,
+ 425, 429, 431, 436, 437, 441, 442, 446, 447, 448,
+ 452, 456, 457, 461, 462, 466, 467, 470, 475, 483,
+ 487, 488, 492
};
#endif
0, 1, 5
};
-/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state
- STATE-NUM when YYTABLE doesn't specify something else to do. Zero
+/* YYDEFACT[STATE-NAME] -- Default reduction number in state STATE-NUM.
+ Performed when YYTABLE doesn't specify something else to do. Zero
means the default is an error. */
static const yytype_uint8 yydefact[] =
{
/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If
positive, shift that token. If negative, reduce the rule which
- number is the opposite. If zero, do what YYDEFACT says.
- If YYTABLE_NINF, syntax error. */
+ number is the opposite. If YYTABLE_NINF, syntax error. */
#define YYTABLE_NINF -109
static const yytype_int16 yytable[] =
{
0, 0, 34
};
+#define yypact_value_is_default(yystate) \
+ ((yystate) == (-135))
+
+#define yytable_value_is_error(yytable_value) \
+ YYID (0)
+
static const yytype_int16 yycheck[] =
{
59, 38, 79, 3, 1, 8, 56, 37, 26, 37,
{ \
yychar = (Token); \
yylval = (Value); \
- yytoken = YYTRANSLATE (yychar); \
YYPOPSTACK (1); \
goto yybackup; \
} \
#endif
-/* YY_LOCATION_PRINT -- Print the location on the stream.
- This macro was not mandated originally: define only if we know
- we won't break user code: when these are the locations we know. */
+/* This macro is provided for backward compatibility. */
#ifndef YY_LOCATION_PRINT
-# if defined YYLTYPE_IS_TRIVIAL && YYLTYPE_IS_TRIVIAL
-# define YY_LOCATION_PRINT(File, Loc) \
- fprintf (File, "%d.%d-%d.%d", \
- (Loc).first_line, (Loc).first_column, \
- (Loc).last_line, (Loc).last_column)
-# else
-# define YY_LOCATION_PRINT(File, Loc) ((void) 0)
-# endif
+# define YY_LOCATION_PRINT(File, Loc) ((void) 0)
#endif
# define YYMAXDEPTH 10000
#endif
-\f
#if YYERROR_VERBOSE
}
# endif
-/* Copy into YYRESULT an error message about the unexpected token
- YYCHAR while in state YYSTATE. Return the number of bytes copied,
- including the terminating null byte. If YYRESULT is null, do not
- copy anything; just return the number of bytes that would be
- copied. As a special case, return 0 if an ordinary "syntax error"
- message will do. Return YYSIZE_MAXIMUM if overflow occurs during
- size calculation. */
-static YYSIZE_T
-yysyntax_error (char *yyresult, int yystate, int yychar)
-{
- int yyn = yypact[yystate];
+/* Copy into *YYMSG, which is of size *YYMSG_ALLOC, an error message
+ about the unexpected token YYTOKEN for the state stack whose top is
+ YYSSP.
- if (! (YYPACT_NINF < yyn && yyn <= YYLAST))
- return 0;
- else
+ Return 0 if *YYMSG was successfully written. Return 1 if *YYMSG is
+ not large enough to hold the message. In that case, also set
+ *YYMSG_ALLOC to the required number of bytes. Return 2 if the
+ required number of bytes is too large to store. */
+static int
+yysyntax_error (YYSIZE_T *yymsg_alloc, char **yymsg,
+ yytype_int16 *yyssp, int yytoken)
+{
+ YYSIZE_T yysize0 = yytnamerr (0, yytname[yytoken]);
+ YYSIZE_T yysize = yysize0;
+ YYSIZE_T yysize1;
+ enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 };
+ /* Internationalized format string. */
+ const char *yyformat = 0;
+ /* Arguments of yyformat. */
+ char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM];
+ /* Number of reported tokens (one for the "unexpected", one per
+ "expected"). */
+ int yycount = 0;
+
+ /* There are many possibilities here to consider:
+ - Assume YYFAIL is not used. It's too flawed to consider. See
+ <http://lists.gnu.org/archive/html/bison-patches/2009-12/msg00024.html>
+ for details. YYERROR is fine as it does not invoke this
+ function.
+ - If this state is a consistent state with a default action, then
+ the only way this function was invoked is if the default action
+ is an error action. In that case, don't check for expected
+ tokens because there are none.
+ - The only way there can be no lookahead present (in yychar) is if
+ this state is a consistent state with a default action. Thus,
+ detecting the absence of a lookahead is sufficient to determine
+ that there is no unexpected or expected token to report. In that
+ case, just report a simple "syntax error".
+ - Don't assume there isn't a lookahead just because this state is a
+ consistent state with a default action. There might have been a
+ previous inconsistent state, consistent state with a non-default
+ action, or user semantic action that manipulated yychar.
+ - Of course, the expected token list depends on states to have
+ correct lookahead information, and it depends on the parser not
+ to perform extra reductions after fetching a lookahead from the
+ scanner and before detecting a syntax error. Thus, state merging
+ (from LALR or IELR) and default reductions corrupt the expected
+ token list. However, the list is correct for canonical LR with
+ one exception: it will still contain any token that will not be
+ accepted due to an error action in a later state.
+ */
+ if (yytoken != YYEMPTY)
{
- int yytype = YYTRANSLATE (yychar);
- YYSIZE_T yysize0 = yytnamerr (0, yytname[yytype]);
- YYSIZE_T yysize = yysize0;
- YYSIZE_T yysize1;
- int yysize_overflow = 0;
- enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 };
- char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM];
- int yyx;
-
-# if 0
- /* This is so xgettext sees the translatable formats that are
- constructed on the fly. */
- YY_("syntax error, unexpected %s");
- YY_("syntax error, unexpected %s, expecting %s");
- YY_("syntax error, unexpected %s, expecting %s or %s");
- YY_("syntax error, unexpected %s, expecting %s or %s or %s");
- YY_("syntax error, unexpected %s, expecting %s or %s or %s or %s");
-# endif
- char *yyfmt;
- char const *yyf;
- static char const yyunexpected[] = "syntax error, unexpected %s";
- static char const yyexpecting[] = ", expecting %s";
- static char const yyor[] = " or %s";
- char yyformat[sizeof yyunexpected
- + sizeof yyexpecting - 1
- + ((YYERROR_VERBOSE_ARGS_MAXIMUM - 2)
- * (sizeof yyor - 1))];
- char const *yyprefix = yyexpecting;
-
- /* Start YYX at -YYN if negative to avoid negative indexes in
- YYCHECK. */
- int yyxbegin = yyn < 0 ? -yyn : 0;
-
- /* Stay within bounds of both yycheck and yytname. */
- int yychecklim = YYLAST - yyn + 1;
- int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS;
- int yycount = 1;
-
- yyarg[0] = yytname[yytype];
- yyfmt = yystpcpy (yyformat, yyunexpected);
-
- for (yyx = yyxbegin; yyx < yyxend; ++yyx)
- if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR)
- {
- if (yycount == YYERROR_VERBOSE_ARGS_MAXIMUM)
- {
- yycount = 1;
- yysize = yysize0;
- yyformat[sizeof yyunexpected - 1] = '\0';
- break;
- }
- yyarg[yycount++] = yytname[yyx];
- yysize1 = yysize + yytnamerr (0, yytname[yyx]);
- yysize_overflow |= (yysize1 < yysize);
- yysize = yysize1;
- yyfmt = yystpcpy (yyfmt, yyprefix);
- yyprefix = yyor;
- }
+ int yyn = yypact[*yyssp];
+ yyarg[yycount++] = yytname[yytoken];
+ if (!yypact_value_is_default (yyn))
+ {
+ /* Start YYX at -YYN if negative to avoid negative indexes in
+ YYCHECK. In other words, skip the first -YYN actions for
+ this state because they are default actions. */
+ int yyxbegin = yyn < 0 ? -yyn : 0;
+ /* Stay within bounds of both yycheck and yytname. */
+ int yychecklim = YYLAST - yyn + 1;
+ int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS;
+ int yyx;
+
+ for (yyx = yyxbegin; yyx < yyxend; ++yyx)
+ if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR
+ && !yytable_value_is_error (yytable[yyx + yyn]))
+ {
+ if (yycount == YYERROR_VERBOSE_ARGS_MAXIMUM)
+ {
+ yycount = 1;
+ yysize = yysize0;
+ break;
+ }
+ yyarg[yycount++] = yytname[yyx];
+ yysize1 = yysize + yytnamerr (0, yytname[yyx]);
+ if (! (yysize <= yysize1
+ && yysize1 <= YYSTACK_ALLOC_MAXIMUM))
+ return 2;
+ yysize = yysize1;
+ }
+ }
+ }
- yyf = YY_(yyformat);
- yysize1 = yysize + yystrlen (yyf);
- yysize_overflow |= (yysize1 < yysize);
- yysize = yysize1;
+ switch (yycount)
+ {
+# define YYCASE_(N, S) \
+ case N: \
+ yyformat = S; \
+ break
+ YYCASE_(0, YY_("syntax error"));
+ YYCASE_(1, YY_("syntax error, unexpected %s"));
+ YYCASE_(2, YY_("syntax error, unexpected %s, expecting %s"));
+ YYCASE_(3, YY_("syntax error, unexpected %s, expecting %s or %s"));
+ YYCASE_(4, YY_("syntax error, unexpected %s, expecting %s or %s or %s"));
+ YYCASE_(5, YY_("syntax error, unexpected %s, expecting %s or %s or %s or %s"));
+# undef YYCASE_
+ }
- if (yysize_overflow)
- return YYSIZE_MAXIMUM;
+ yysize1 = yysize + yystrlen (yyformat);
+ if (! (yysize <= yysize1 && yysize1 <= YYSTACK_ALLOC_MAXIMUM))
+ return 2;
+ yysize = yysize1;
- if (yyresult)
- {
- /* Avoid sprintf, as that infringes on the user's name space.
- Don't have undefined behavior even if the translation
- produced a string with the wrong number of "%s"s. */
- char *yyp = yyresult;
- int yyi = 0;
- while ((*yyp = *yyf) != '\0')
- {
- if (*yyp == '%' && yyf[1] == 's' && yyi < yycount)
- {
- yyp += yytnamerr (yyp, yyarg[yyi++]);
- yyf += 2;
- }
- else
- {
- yyp++;
- yyf++;
- }
- }
- }
- return yysize;
+ if (*yymsg_alloc < yysize)
+ {
+ *yymsg_alloc = 2 * yysize;
+ if (! (yysize <= *yymsg_alloc
+ && *yymsg_alloc <= YYSTACK_ALLOC_MAXIMUM))
+ *yymsg_alloc = YYSTACK_ALLOC_MAXIMUM;
+ return 1;
}
+
+ /* Avoid sprintf, as that infringes on the user's name space.
+ Don't have undefined behavior even if the translation
+ produced a string with the wrong number of "%s"s. */
+ {
+ char *yyp = *yymsg;
+ int yyi = 0;
+ while ((*yyp = *yyformat) != '\0')
+ if (*yyp == '%' && yyformat[1] == 's' && yyi < yycount)
+ {
+ yyp += yytnamerr (yyp, yyarg[yyi++]);
+ yyformat += 2;
+ }
+ else
+ {
+ yyp++;
+ yyformat++;
+ }
+ }
+ return 0;
}
#endif /* YYERROR_VERBOSE */
-\f
/*-----------------------------------------------.
| Release the memory associated to this symbol. |
}
}
+
/* Prevent warnings from -Wmissing-prototypes. */
#ifdef YYPARSE_PARAM
#if defined __STDC__ || defined __cplusplus
int yynerrs;
-
-/*-------------------------.
-| yyparse or yypush_parse. |
-`-------------------------*/
+/*----------.
+| yyparse. |
+`----------*/
#ifdef YYPARSE_PARAM
#if (defined __STDC__ || defined __C99__FUNC__ \
#endif
#endif
{
-
-
int yystate;
/* Number of tokens to shift before error messages enabled. */
int yyerrstatus;
/* First try to decide what to do without reference to lookahead token. */
yyn = yypact[yystate];
- if (yyn == YYPACT_NINF)
+ if (yypact_value_is_default (yyn))
goto yydefault;
/* Not known => get a lookahead token if don't already have one. */
yyn = yytable[yyn];
if (yyn <= 0)
{
- if (yyn == 0 || yyn == YYTABLE_NINF)
- goto yyerrlab;
+ if (yytable_value_is_error (yyn))
+ goto yyerrlab;
yyn = -yyn;
goto yyreduce;
}
{
case 4:
- { is_typedef = 0; is_extern = 0; current_name = NULL; decl_spec = NULL; ;}
+ { is_typedef = 0; is_extern = 0; current_name = NULL; decl_spec = NULL; }
break;
case 5:
- { free_list(*(yyvsp[(2) - (2)]), NULL); *(yyvsp[(2) - (2)]) = NULL; ;}
+ { free_list(*(yyvsp[(2) - (2)]), NULL); *(yyvsp[(2) - (2)]) = NULL; }
break;
case 6:
- { is_typedef = 1; ;}
+ { is_typedef = 1; }
break;
case 7:
- { (yyval) = (yyvsp[(4) - (4)]); ;}
+ { (yyval) = (yyvsp[(4) - (4)]); }
break;
case 8:
- { is_typedef = 1; ;}
+ { is_typedef = 1; }
break;
case 9:
- { (yyval) = (yyvsp[(3) - (3)]); ;}
+ { (yyval) = (yyvsp[(3) - (3)]); }
break;
case 14:
- { (yyval) = (yyvsp[(2) - (2)]); ;}
+ { (yyval) = (yyvsp[(2) - (2)]); }
break;
case 15:
- { (yyval) = (yyvsp[(2) - (2)]); ;}
+ { (yyval) = (yyvsp[(2) - (2)]); }
break;
case 16:
current_name = NULL;
}
(yyval) = (yyvsp[(3) - (3)]);
- ;}
+ }
break;
case 17:
- { (yyval) = NULL; ;}
+ { (yyval) = NULL; }
break;
case 19:
is_typedef ? SYM_TYPEDEF : SYM_NORMAL, decl, is_extern);
current_name = NULL;
(yyval) = (yyvsp[(1) - (1)]);
- ;}
+ }
break;
case 20:
is_typedef ? SYM_TYPEDEF : SYM_NORMAL, decl, is_extern);
current_name = NULL;
(yyval) = (yyvsp[(3) - (3)]);
- ;}
+ }
break;
case 21:
- { (yyval) = (yyvsp[(4) - (4)]) ? (yyvsp[(4) - (4)]) : (yyvsp[(3) - (4)]) ? (yyvsp[(3) - (4)]) : (yyvsp[(2) - (4)]) ? (yyvsp[(2) - (4)]) : (yyvsp[(1) - (4)]); ;}
+ { (yyval) = (yyvsp[(4) - (4)]) ? (yyvsp[(4) - (4)]) : (yyvsp[(3) - (4)]) ? (yyvsp[(3) - (4)]) : (yyvsp[(2) - (4)]) ? (yyvsp[(2) - (4)]) : (yyvsp[(1) - (4)]); }
break;
case 22:
- { decl_spec = NULL; ;}
+ { decl_spec = NULL; }
break;
case 24:
- { decl_spec = *(yyvsp[(1) - (1)]); ;}
+ { decl_spec = *(yyvsp[(1) - (1)]); }
break;
case 25:
- { decl_spec = *(yyvsp[(2) - (2)]); ;}
+ { decl_spec = *(yyvsp[(2) - (2)]); }
break;
case 26:
is really irrelevant to the linkage. */
remove_node((yyvsp[(1) - (1)]));
(yyval) = (yyvsp[(1) - (1)]);
- ;}
+ }
break;
case 31:
- { is_extern = 1; (yyval) = (yyvsp[(1) - (1)]); ;}
+ { is_extern = 1; (yyval) = (yyvsp[(1) - (1)]); }
break;
case 32:
- { is_extern = 0; (yyval) = (yyvsp[(1) - (1)]); ;}
+ { is_extern = 0; (yyval) = (yyvsp[(1) - (1)]); }
break;
case 37:
- { remove_node((yyvsp[(1) - (2)])); (*(yyvsp[(2) - (2)]))->tag = SYM_STRUCT; (yyval) = (yyvsp[(2) - (2)]); ;}
+ { remove_node((yyvsp[(1) - (2)])); (*(yyvsp[(2) - (2)]))->tag = SYM_STRUCT; (yyval) = (yyvsp[(2) - (2)]); }
break;
case 38:
- { remove_node((yyvsp[(1) - (2)])); (*(yyvsp[(2) - (2)]))->tag = SYM_UNION; (yyval) = (yyvsp[(2) - (2)]); ;}
+ { remove_node((yyvsp[(1) - (2)])); (*(yyvsp[(2) - (2)]))->tag = SYM_UNION; (yyval) = (yyvsp[(2) - (2)]); }
break;
case 39:
- { remove_node((yyvsp[(1) - (2)])); (*(yyvsp[(2) - (2)]))->tag = SYM_ENUM; (yyval) = (yyvsp[(2) - (2)]); ;}
+ { remove_node((yyvsp[(1) - (2)])); (*(yyvsp[(2) - (2)]))->tag = SYM_ENUM; (yyval) = (yyvsp[(2) - (2)]); }
break;
case 40:
- { struct string_list *s = *(yyvsp[(3) - (3)]), *i = *(yyvsp[(2) - (3)]), *r;
- r = copy_node(i); r->tag = SYM_STRUCT;
- r->next = (*(yyvsp[(1) - (3)]))->next; *(yyvsp[(3) - (3)]) = r; (*(yyvsp[(1) - (3)]))->next = NULL;
- add_symbol(i->string, SYM_STRUCT, s, is_extern);
- (yyval) = (yyvsp[(3) - (3)]);
- ;}
+ { record_compound((yyvsp[(1) - (3)]), (yyvsp[(2) - (3)]), (yyvsp[(3) - (3)]), SYM_STRUCT); (yyval) = (yyvsp[(3) - (3)]); }
break;
case 41:
- { struct string_list *s = *(yyvsp[(3) - (3)]), *i = *(yyvsp[(2) - (3)]), *r;
- r = copy_node(i); r->tag = SYM_UNION;
- r->next = (*(yyvsp[(1) - (3)]))->next; *(yyvsp[(3) - (3)]) = r; (*(yyvsp[(1) - (3)]))->next = NULL;
- add_symbol(i->string, SYM_UNION, s, is_extern);
- (yyval) = (yyvsp[(3) - (3)]);
- ;}
+ { record_compound((yyvsp[(1) - (3)]), (yyvsp[(2) - (3)]), (yyvsp[(3) - (3)]), SYM_UNION); (yyval) = (yyvsp[(3) - (3)]); }
break;
case 42:
- { struct string_list *s = *(yyvsp[(3) - (3)]), *i = *(yyvsp[(2) - (3)]), *r;
- r = copy_node(i); r->tag = SYM_ENUM;
- r->next = (*(yyvsp[(1) - (3)]))->next; *(yyvsp[(3) - (3)]) = r; (*(yyvsp[(1) - (3)]))->next = NULL;
- add_symbol(i->string, SYM_ENUM, s, is_extern);
- (yyval) = (yyvsp[(3) - (3)]);
- ;}
+ { record_compound((yyvsp[(1) - (3)]), (yyvsp[(2) - (3)]), (yyvsp[(3) - (3)]), SYM_ENUM); (yyval) = (yyvsp[(3) - (3)]); }
break;
case 43:
- { add_symbol(NULL, SYM_ENUM, NULL, 0); (yyval) = (yyvsp[(2) - (2)]); ;}
+ { add_symbol(NULL, SYM_ENUM, NULL, 0); (yyval) = (yyvsp[(2) - (2)]); }
break;
case 44:
- { (yyval) = (yyvsp[(2) - (2)]); ;}
+ { (yyval) = (yyvsp[(2) - (2)]); }
break;
case 45:
- { (yyval) = (yyvsp[(2) - (2)]); ;}
+ { (yyval) = (yyvsp[(2) - (2)]); }
break;
case 56:
- { (*(yyvsp[(1) - (1)]))->tag = SYM_TYPEDEF; (yyval) = (yyvsp[(1) - (1)]); ;}
+ { (*(yyvsp[(1) - (1)]))->tag = SYM_TYPEDEF; (yyval) = (yyvsp[(1) - (1)]); }
break;
case 57:
- { (yyval) = (yyvsp[(2) - (2)]) ? (yyvsp[(2) - (2)]) : (yyvsp[(1) - (2)]); ;}
+ { (yyval) = (yyvsp[(2) - (2)]) ? (yyvsp[(2) - (2)]) : (yyvsp[(1) - (2)]); }
break;
case 58:
- { (yyval) = NULL; ;}
+ { (yyval) = NULL; }
break;
case 61:
- { (yyval) = (yyvsp[(2) - (2)]); ;}
+ { (yyval) = (yyvsp[(2) - (2)]); }
break;
case 65:
{ /* restrict has no effect in prototypes so ignore it */
remove_node((yyvsp[(1) - (1)]));
(yyval) = (yyvsp[(1) - (1)]);
- ;}
+ }
break;
case 66:
- { (yyval) = (yyvsp[(2) - (2)]); ;}
+ { (yyval) = (yyvsp[(2) - (2)]); }
break;
case 68:
current_name = (*(yyvsp[(1) - (1)]))->string;
(yyval) = (yyvsp[(1) - (1)]);
}
- ;}
+ }
break;
case 69:
- { (yyval) = (yyvsp[(4) - (4)]); ;}
+ { (yyval) = (yyvsp[(4) - (4)]); }
break;
case 70:
- { (yyval) = (yyvsp[(4) - (4)]); ;}
+ { (yyval) = (yyvsp[(4) - (4)]); }
break;
case 71:
- { (yyval) = (yyvsp[(2) - (2)]); ;}
+ { (yyval) = (yyvsp[(2) - (2)]); }
break;
case 72:
- { (yyval) = (yyvsp[(3) - (3)]); ;}
+ { (yyval) = (yyvsp[(3) - (3)]); }
break;
case 73:
- { (yyval) = (yyvsp[(3) - (3)]); ;}
+ { (yyval) = (yyvsp[(3) - (3)]); }
break;
case 74:
- { (yyval) = (yyvsp[(2) - (2)]); ;}
+ { (yyval) = (yyvsp[(2) - (2)]); }
break;
case 78:
- { (yyval) = (yyvsp[(4) - (4)]); ;}
+ { (yyval) = (yyvsp[(4) - (4)]); }
break;
case 79:
- { (yyval) = (yyvsp[(4) - (4)]); ;}
+ { (yyval) = (yyvsp[(4) - (4)]); }
break;
case 80:
- { (yyval) = (yyvsp[(2) - (2)]); ;}
+ { (yyval) = (yyvsp[(2) - (2)]); }
break;
case 81:
- { (yyval) = (yyvsp[(3) - (3)]); ;}
+ { (yyval) = (yyvsp[(3) - (3)]); }
break;
case 82:
- { (yyval) = (yyvsp[(3) - (3)]); ;}
+ { (yyval) = (yyvsp[(3) - (3)]); }
break;
case 83:
- { (yyval) = (yyvsp[(2) - (2)]); ;}
+ { (yyval) = (yyvsp[(2) - (2)]); }
break;
case 85:
- { (yyval) = (yyvsp[(3) - (3)]); ;}
+ { (yyval) = (yyvsp[(3) - (3)]); }
break;
case 86:
- { (yyval) = NULL; ;}
+ { (yyval) = NULL; }
break;
case 89:
- { (yyval) = (yyvsp[(3) - (3)]); ;}
+ { (yyval) = (yyvsp[(3) - (3)]); }
break;
case 90:
- { (yyval) = (yyvsp[(2) - (2)]) ? (yyvsp[(2) - (2)]) : (yyvsp[(1) - (2)]); ;}
+ { (yyval) = (yyvsp[(2) - (2)]) ? (yyvsp[(2) - (2)]) : (yyvsp[(1) - (2)]); }
break;
case 91:
- { (yyval) = (yyvsp[(2) - (2)]) ? (yyvsp[(2) - (2)]) : (yyvsp[(1) - (2)]); ;}
+ { (yyval) = (yyvsp[(2) - (2)]) ? (yyvsp[(2) - (2)]) : (yyvsp[(1) - (2)]); }
break;
case 93:
- { (yyval) = NULL; ;}
+ { (yyval) = NULL; }
break;
case 94:
private parameter names. */
remove_node((yyvsp[(1) - (1)]));
(yyval) = (yyvsp[(1) - (1)]);
- ;}
+ }
break;
case 95:
{ remove_node((yyvsp[(1) - (1)]));
(yyval) = (yyvsp[(1) - (1)]);
- ;}
+ }
break;
case 96:
- { (yyval) = (yyvsp[(4) - (4)]); ;}
+ { (yyval) = (yyvsp[(4) - (4)]); }
break;
case 97:
- { (yyval) = (yyvsp[(4) - (4)]); ;}
+ { (yyval) = (yyvsp[(4) - (4)]); }
break;
case 98:
- { (yyval) = (yyvsp[(2) - (2)]); ;}
+ { (yyval) = (yyvsp[(2) - (2)]); }
break;
case 99:
- { (yyval) = (yyvsp[(3) - (3)]); ;}
+ { (yyval) = (yyvsp[(3) - (3)]); }
break;
case 100:
- { (yyval) = (yyvsp[(3) - (3)]); ;}
+ { (yyval) = (yyvsp[(3) - (3)]); }
break;
case 101:
*(yyvsp[(2) - (3)]) = NULL;
add_symbol(current_name, SYM_NORMAL, decl, is_extern);
(yyval) = (yyvsp[(3) - (3)]);
- ;}
+ }
break;
case 102:
- { (yyval) = NULL; ;}
+ { (yyval) = NULL; }
break;
case 104:
- { remove_list((yyvsp[(2) - (2)]), &(*(yyvsp[(1) - (2)]))->next); (yyval) = (yyvsp[(2) - (2)]); ;}
+ { remove_list((yyvsp[(2) - (2)]), &(*(yyvsp[(1) - (2)]))->next); (yyval) = (yyvsp[(2) - (2)]); }
break;
case 105:
- { (yyval) = (yyvsp[(3) - (3)]); ;}
+ { (yyval) = (yyvsp[(3) - (3)]); }
break;
case 106:
- { (yyval) = (yyvsp[(3) - (3)]); ;}
+ { (yyval) = (yyvsp[(3) - (3)]); }
break;
case 107:
- { (yyval) = NULL; ;}
+ { (yyval) = NULL; }
break;
case 110:
- { (yyval) = (yyvsp[(2) - (2)]); ;}
+ { (yyval) = (yyvsp[(2) - (2)]); }
break;
case 111:
- { (yyval) = (yyvsp[(3) - (3)]); ;}
+ { (yyval) = (yyvsp[(3) - (3)]); }
break;
case 112:
- { (yyval) = (yyvsp[(2) - (2)]); ;}
+ { (yyval) = (yyvsp[(2) - (2)]); }
break;
case 113:
- { (yyval) = NULL; ;}
+ { (yyval) = NULL; }
break;
case 116:
- { (yyval) = (yyvsp[(3) - (3)]); ;}
+ { (yyval) = (yyvsp[(3) - (3)]); }
break;
case 117:
- { (yyval) = (yyvsp[(2) - (2)]) ? (yyvsp[(2) - (2)]) : (yyvsp[(1) - (2)]); ;}
+ { (yyval) = (yyvsp[(2) - (2)]) ? (yyvsp[(2) - (2)]) : (yyvsp[(1) - (2)]); }
break;
case 118:
- { (yyval) = (yyvsp[(2) - (2)]); ;}
+ { (yyval) = (yyvsp[(2) - (2)]); }
break;
case 120:
- { (yyval) = (yyvsp[(2) - (2)]); ;}
+ { (yyval) = (yyvsp[(2) - (2)]); }
break;
case 121:
- { (yyval) = NULL; ;}
+ { (yyval) = NULL; }
break;
case 123:
- { (yyval) = (yyvsp[(3) - (3)]); ;}
+ { (yyval) = (yyvsp[(3) - (3)]); }
break;
case 124:
- { (yyval) = (yyvsp[(4) - (4)]); ;}
+ { (yyval) = (yyvsp[(4) - (4)]); }
break;
case 127:
{
const char *name = strdup((*(yyvsp[(1) - (1)]))->string);
add_symbol(name, SYM_ENUM_CONST, NULL, 0);
- ;}
+ }
break;
case 128:
const char *name = strdup((*(yyvsp[(1) - (3)]))->string);
struct string_list *expr = copy_list_range(*(yyvsp[(3) - (3)]), *(yyvsp[(2) - (3)]));
add_symbol(name, SYM_ENUM_CONST, expr, 0);
- ;}
+ }
break;
case 129:
- { (yyval) = (yyvsp[(2) - (2)]); ;}
+ { (yyval) = (yyvsp[(2) - (2)]); }
break;
case 130:
- { (yyval) = NULL; ;}
+ { (yyval) = NULL; }
break;
case 132:
- { export_symbol((*(yyvsp[(3) - (5)]))->string); (yyval) = (yyvsp[(5) - (5)]); ;}
+ { export_symbol((*(yyvsp[(3) - (5)]))->string); (yyval) = (yyvsp[(5) - (5)]); }
break;
default: break;
}
+ /* User semantic actions sometimes alter yychar, and that requires
+ that yytoken be updated with the new translation. We take the
+ approach of translating immediately before every use of yytoken.
+ One alternative is translating here after every semantic action,
+ but that translation would be missed if the semantic action invokes
+ YYABORT, YYACCEPT, or YYERROR immediately after altering yychar or
+ if it invokes YYBACKUP. In the case of YYABORT or YYACCEPT, an
+ incorrect destructor might then be invoked immediately. In the
+ case of YYERROR or YYBACKUP, subsequent parser actions might lead
+ to an incorrect destructor call or verbose syntax error message
+ before the lookahead is translated. */
YY_SYMBOL_PRINT ("-> $$ =", yyr1[yyn], &yyval, &yyloc);
YYPOPSTACK (yylen);
| yyerrlab -- here on detecting error |
`------------------------------------*/
yyerrlab:
+ /* Make sure we have latest lookahead translation. See comments at
+ user semantic actions for why this is necessary. */
+ yytoken = yychar == YYEMPTY ? YYEMPTY : YYTRANSLATE (yychar);
+
/* If not already recovering from an error, report this error. */
if (!yyerrstatus)
{
#if ! YYERROR_VERBOSE
yyerror (YY_("syntax error"));
#else
+# define YYSYNTAX_ERROR yysyntax_error (&yymsg_alloc, &yymsg, \
+ yyssp, yytoken)
{
- YYSIZE_T yysize = yysyntax_error (0, yystate, yychar);
- if (yymsg_alloc < yysize && yymsg_alloc < YYSTACK_ALLOC_MAXIMUM)
- {
- YYSIZE_T yyalloc = 2 * yysize;
- if (! (yysize <= yyalloc && yyalloc <= YYSTACK_ALLOC_MAXIMUM))
- yyalloc = YYSTACK_ALLOC_MAXIMUM;
- if (yymsg != yymsgbuf)
- YYSTACK_FREE (yymsg);
- yymsg = (char *) YYSTACK_ALLOC (yyalloc);
- if (yymsg)
- yymsg_alloc = yyalloc;
- else
- {
- yymsg = yymsgbuf;
- yymsg_alloc = sizeof yymsgbuf;
- }
- }
-
- if (0 < yysize && yysize <= yymsg_alloc)
- {
- (void) yysyntax_error (yymsg, yystate, yychar);
- yyerror (yymsg);
- }
- else
- {
- yyerror (YY_("syntax error"));
- if (yysize != 0)
- goto yyexhaustedlab;
- }
+ char const *yymsgp = YY_("syntax error");
+ int yysyntax_error_status;
+ yysyntax_error_status = YYSYNTAX_ERROR;
+ if (yysyntax_error_status == 0)
+ yymsgp = yymsg;
+ else if (yysyntax_error_status == 1)
+ {
+ if (yymsg != yymsgbuf)
+ YYSTACK_FREE (yymsg);
+ yymsg = (char *) YYSTACK_ALLOC (yymsg_alloc);
+ if (!yymsg)
+ {
+ yymsg = yymsgbuf;
+ yymsg_alloc = sizeof yymsgbuf;
+ yysyntax_error_status = 2;
+ }
+ else
+ {
+ yysyntax_error_status = YYSYNTAX_ERROR;
+ yymsgp = yymsg;
+ }
+ }
+ yyerror (yymsgp);
+ if (yysyntax_error_status == 2)
+ goto yyexhaustedlab;
}
+# undef YYSYNTAX_ERROR
#endif
}
for (;;)
{
yyn = yypact[yystate];
- if (yyn != YYPACT_NINF)
+ if (!yypact_value_is_default (yyn))
{
yyn += YYTERROR;
if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR)
yyreturn:
if (yychar != YYEMPTY)
- yydestruct ("Cleanup: discarding lookahead",
- yytoken, &yylval);
+ {
+ /* Make sure we have latest lookahead translation. See comments at
+ user semantic actions for why this is necessary. */
+ yytoken = YYTRANSLATE (yychar);
+ yydestruct ("Cleanup: discarding lookahead",
+ yytoken, &yylval);
+ }
/* Do not reclaim the symbols of the rule which action triggered
this YYABORT or YYACCEPT. */
YYPOPSTACK (yylen);
-/* A Bison parser, made by GNU Bison 2.4.3. */
+/* A Bison parser, made by GNU Bison 2.5. */
-/* Skeleton interface for Bison's Yacc-like parsers in C
+/* Bison interface for Yacc-like parsers in C
- Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
- 2009, 2010 Free Software Foundation, Inc.
+ Copyright (C) 1984, 1989-1990, 2000-2011 Free Software Foundation, Inc.
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
free_list(b, e);
}
+/* Record definition of a struct/union/enum */
+static void record_compound(struct string_list **keyw,
+ struct string_list **ident,
+ struct string_list **body,
+ enum symbol_type type)
+{
+ struct string_list *b = *body, *i = *ident, *r;
+
+ if (i->in_source_file) {
+ remove_node(keyw);
+ (*ident)->tag = type;
+ remove_list(body, ident);
+ return;
+ }
+ r = copy_node(i); r->tag = type;
+ r->next = (*keyw)->next; *body = r; (*keyw)->next = NULL;
+ add_symbol(i->string, type, b, is_extern);
+}
+
%}
%token ASM_KEYW
/* Full definitions of an s/u/e. Record it. */
| STRUCT_KEYW IDENT class_body
- { struct string_list *s = *$3, *i = *$2, *r;
- r = copy_node(i); r->tag = SYM_STRUCT;
- r->next = (*$1)->next; *$3 = r; (*$1)->next = NULL;
- add_symbol(i->string, SYM_STRUCT, s, is_extern);
- $$ = $3;
- }
+ { record_compound($1, $2, $3, SYM_STRUCT); $$ = $3; }
| UNION_KEYW IDENT class_body
- { struct string_list *s = *$3, *i = *$2, *r;
- r = copy_node(i); r->tag = SYM_UNION;
- r->next = (*$1)->next; *$3 = r; (*$1)->next = NULL;
- add_symbol(i->string, SYM_UNION, s, is_extern);
- $$ = $3;
- }
+ { record_compound($1, $2, $3, SYM_UNION); $$ = $3; }
| ENUM_KEYW IDENT enum_body
- { struct string_list *s = *$3, *i = *$2, *r;
- r = copy_node(i); r->tag = SYM_ENUM;
- r->next = (*$1)->next; *$3 = r; (*$1)->next = NULL;
- add_symbol(i->string, SYM_ENUM, s, is_extern);
- $$ = $3;
- }
+ { record_compound($1, $2, $3, SYM_ENUM); $$ = $3; }
/*
* Anonymous enum definition. Tell add_symbol() to restart its counter.
*/
$(Q)mkdir -p include/generated
$< --$@ $(Kconfig)
-# if no path is given, then use src directory to find file
-ifdef LSMOD
-LSMOD_F := $(LSMOD)
-ifeq ($(findstring /,$(LSMOD)),)
- LSMOD_F := $(objtree)/$(LSMOD)
-endif
-endif
-
-localmodconfig: $(obj)/streamline_config.pl $(obj)/conf
+localyesconfig localmodconfig: $(obj)/streamline_config.pl $(obj)/conf
$(Q)mkdir -p include/generated
- $(Q)perl $< $(srctree) $(Kconfig) $(LSMOD_F) > .tmp.config
+ $(Q)perl $< --$@ $(srctree) $(Kconfig) > .tmp.config
$(Q)if [ -f .config ]; then \
cmp -s .tmp.config .config || \
(mv -f .config .config.old.1; \
fi
$(Q)rm -f .tmp.config
-localyesconfig: $(obj)/streamline_config.pl $(obj)/conf
- $(Q)mkdir -p include/generated
- $(Q)perl $< $(srctree) $(Kconfig) $(LSMOD_F) > .tmp.config
- $(Q)sed -i s/=m/=y/ .tmp.config
- $(Q)if [ -f .config ]; then \
- cmp -s .tmp.config .config || \
- (mv -f .config .config.old.1; \
- mv -f .tmp.config .config; \
- $(obj)/conf --silentoldconfig $(Kconfig); \
- mv -f .config.old.1 .config.old) \
- else \
- mv -f .tmp.config .config; \
- $(obj)/conf --silentoldconfig $(Kconfig); \
- fi
- $(Q)rm -f .tmp.config
-
# Create new linux.pot file
# Adjust charset to UTF-8 in .po file to accept UTF-8 in Kconfig files
# The symlink is used to repair a deficiency in arch/um
fprintf(fp, "#define %s%s%s 1\n",
CONFIG_, sym->name, suffix);
}
- /*
- * Generate the __enabled_CONFIG_* and
- * __enabled_CONFIG_*_MODULE macros for use by the
- * IS_{ENABLED,BUILTIN,MODULE} macros. The _MODULE variant is
- * generated even for booleans so that the IS_ENABLED() macro
- * works.
- */
- fprintf(fp, "#define __enabled_" CONFIG_ "%s %d\n",
- sym->name, (*value == 'y'));
- fprintf(fp, "#define __enabled_" CONFIG_ "%s_MODULE %d\n",
- sym->name, (*value == 'm'));
break;
}
case S_HEX: {
.print_comment = header_print_comment,
};
+/*
+ * Generate the __enabled_CONFIG_* and __enabled_CONFIG_*_MODULE macros for
+ * use by the IS_{ENABLED,BUILTIN,MODULE} macros. The _MODULE variant is
+ * generated even for booleans so that the IS_ENABLED() macro works.
+ */
+static void
+header_print__enabled_symbol(FILE *fp, struct symbol *sym, const char *value, void *arg)
+{
+
+ switch (sym->type) {
+ case S_BOOLEAN:
+ case S_TRISTATE: {
+ fprintf(fp, "#define __enabled_" CONFIG_ "%s %d\n",
+ sym->name, (*value == 'y'));
+ fprintf(fp, "#define __enabled_" CONFIG_ "%s_MODULE %d\n",
+ sym->name, (*value == 'm'));
+ break;
+ }
+ default:
+ break;
+ }
+}
+
+static struct conf_printer header__enabled_printer_cb =
+{
+ .print_symbol = header_print__enabled_symbol,
+ .print_comment = header_print_comment,
+};
+
/*
* Tristate printer
*
conf_write_heading(out_h, &header_printer_cb, NULL);
for_all_symbols(i, sym) {
+ if (!sym->name)
+ continue;
+
sym_calc_value(sym);
- if (!(sym->flags & SYMBOL_WRITE) || !sym->name)
+
+ conf_write_symbol(out_h, sym, &header__enabled_printer_cb, NULL);
+
+ if (!(sym->flags & SYMBOL_WRITE))
continue;
- /* write symbol to auto.conf, tristate and header files */
conf_write_symbol(out, sym, &kconfig_printer_cb, (void *)1);
conf_write_symbol(tristate, sym, &tristate_printer_cb, (void *)1);
*/
static void print_line(WINDOW * win, int row, int width)
{
- int y, x;
char *line;
line = get_line();
waddch(win, ' ');
waddnstr(win, line, MIN(strlen(line), width - 2));
- getyx(win, y, x);
/* Clear 'residue' of previous line */
#if OLD_NCURSES
{
+ int x = getcurx(win);
int i;
for (i = 0; i < width - x; i++)
waddch(win, ' ');
#include <stdarg.h>
#include <stdlib.h>
#include <string.h>
+#include <signal.h>
#include <unistd.h>
#include <locale.h>
static int child_count;
static int single_menu_mode;
static int show_all_options;
+static int saved_x, saved_y;
static void conf(struct menu *menu);
static void conf_choice(struct menu *menu);
}
}
+static int handle_exit(void)
+{
+ int res;
+
+ dialog_clear();
+ if (conf_get_changed())
+ res = dialog_yesno(NULL,
+ _("Do you wish to save your new configuration ?\n"
+ "<ESC><ESC> to continue."),
+ 6, 60);
+ else
+ res = -1;
+
+ end_dialog(saved_x, saved_y);
+
+ switch (res) {
+ case 0:
+ if (conf_write(filename)) {
+ fprintf(stderr, _("\n\n"
+ "Error while writing of the configuration.\n"
+ "Your configuration changes were NOT saved."
+ "\n\n"));
+ return 1;
+ }
+ /* fall through */
+ case -1:
+ printf(_("\n\n"
+ "*** End of the configuration.\n"
+ "*** Execute 'make' to start the build or try 'make help'."
+ "\n\n"));
+ res = 0;
+ break;
+ default:
+ fprintf(stderr, _("\n\n"
+ "Your configuration changes were NOT saved."
+ "\n\n"));
+ }
+
+ return res;
+}
+
+static void sig_handler(int signo)
+{
+ exit(handle_exit());
+}
+
int main(int ac, char **av)
{
- int saved_x, saved_y;
char *mode;
int res;
bindtextdomain(PACKAGE, LOCALEDIR);
textdomain(PACKAGE);
+ signal(SIGINT, sig_handler);
+
conf_parse(av[1]);
conf_read(NULL);
set_config_filename(conf_get_configname());
do {
conf(&rootmenu);
- dialog_clear();
- if (conf_get_changed())
- res = dialog_yesno(NULL,
- _("Do you wish to save your "
- "new configuration?\n"
- "<ESC><ESC> to continue."),
- 6, 60);
- else
- res = -1;
+ res = handle_exit();
} while (res == KEY_ESC);
- end_dialog(saved_x, saved_y);
-
- switch (res) {
- case 0:
- if (conf_write(filename)) {
- fprintf(stderr, _("\n\n"
- "Error while writing of the configuration.\n"
- "Your configuration changes were NOT saved."
- "\n\n"));
- return 1;
- }
- /* fall through */
- case -1:
- printf(_("\n\n"
- "*** End of the configuration.\n"
- "*** Execute 'make' to start the build or try 'make help'."
- "\n\n"));
- break;
- default:
- fprintf(stderr, _("\n\n"
- "Your configuration changes were NOT saved."
- "\n\n"));
- }
- return 0;
+ return res;
}
#include "lkc.h"
-static const char nohelp_text[] = N_(
- "There is no help available for this option.\n");
+static const char nohelp_text[] = "There is no help available for this option.";
struct menu rootmenu;
static struct menu **last_entry_ptr;
void menu_get_ext_help(struct menu *menu, struct gstr *help)
{
struct symbol *sym = menu->sym;
+ const char *help_text = nohelp_text;
if (menu_has_help(menu)) {
- if (sym->name) {
+ if (sym->name)
str_printf(help, "%s%s:\n\n", CONFIG_, sym->name);
- str_append(help, _(menu_get_help(menu)));
- str_append(help, "\n");
- }
- } else {
- str_append(help, nohelp_text);
+ help_text = menu_get_help(menu);
}
+ str_printf(help, "%s\n", _(help_text));
if (sym)
get_symbol_str(help, sym);
}
"This feature depends on another which\n"
"has been configured as a module.\n"
"As a result, this feature will be built as a module."),
-nohelp_text[] = N_(
-"There is no help available for this option.\n"),
load_config_text[] = N_(
"Enter the name of the configuration file you wish to load.\n"
"Accept the name shown to restore the configuration you\n"
/* the currently selected button */
const char *current_instructions = menu_instructions;
+static char *dialog_input_result;
+static int dialog_input_result_len;
+
static void conf(struct menu *menu);
static void conf_choice(struct menu *menu);
static void conf_string(struct menu *menu);
{
struct symbol **sym_arr;
struct gstr res;
- char dialog_input_result[100];
char *dialog_input;
int dres;
again:
_("Search Configuration Parameter"),
_("Enter " CONFIG_ " (sub)string to search for "
"(with or without \"" CONFIG_ "\")"),
- "", dialog_input_result, 99);
+ "", &dialog_input_result, &dialog_input_result_len);
switch (dres) {
case 0:
break;
static void conf_string(struct menu *menu)
{
const char *prompt = menu_get_prompt(menu);
- char dialog_input_result[256];
while (1) {
int res;
prompt ? _(prompt) : _("Main Menu"),
heading,
sym_get_string_value(menu->sym),
- dialog_input_result,
- sizeof(dialog_input_result));
+ &dialog_input_result,
+ &dialog_input_result_len);
switch (res) {
case 0:
if (sym_set_string_value(menu->sym,
static void conf_load(void)
{
- char dialog_input_result[256];
while (1) {
int res;
res = dialog_inputbox(main_window,
NULL, load_config_text,
filename,
- dialog_input_result,
- sizeof(dialog_input_result));
+ &dialog_input_result,
+ &dialog_input_result_len);
switch (res) {
case 0:
if (!dialog_input_result[0])
static void conf_save(void)
{
- char dialog_input_result[256];
while (1) {
int res;
res = dialog_inputbox(main_window,
NULL, save_config_text,
filename,
- dialog_input_result,
- sizeof(dialog_input_result));
+ &dialog_input_result,
+ &dialog_input_result_len);
switch (res) {
case 0:
if (!dialog_input_result[0])
int dialog_inputbox(WINDOW *main_window,
const char *title, const char *prompt,
- const char *init, char *result, int result_len)
+ const char *init, char **resultp, int *result_len)
{
int prompt_lines = 0;
int prompt_width = 0;
int i, x, y;
int res = -1;
int cursor_position = strlen(init);
+ int cursor_form_win;
+ char *result = *resultp;
+ if (strlen(init)+1 > *result_len) {
+ *result_len = strlen(init)+1;
+ *resultp = result = realloc(result, *result_len);
+ }
/* find the widest line of msg: */
prompt_lines = get_line_no(prompt);
y = (LINES-(prompt_lines+4))/2;
x = (COLS-(prompt_width+4))/2;
- strncpy(result, init, result_len);
+ strncpy(result, init, *result_len);
/* create the windows */
win = newwin(prompt_lines+6, prompt_width+7, y, x);
fill_window(prompt_win, prompt);
mvwprintw(form_win, 0, 0, "%*s", prompt_width, " ");
- mvwprintw(form_win, 0, 0, "%s", result);
+ cursor_form_win = min(cursor_position, prompt_width-1);
+ mvwprintw(form_win, 0, 0, "%s",
+ result + cursor_position-cursor_form_win);
/* create panels */
panel = new_panel(win);
&result[cursor_position],
len-cursor_position+1);
cursor_position--;
+ cursor_form_win--;
+ len--;
}
break;
case KEY_DC:
memmove(&result[cursor_position],
&result[cursor_position+1],
len-cursor_position+1);
+ len--;
}
break;
case KEY_UP:
case KEY_RIGHT:
- if (cursor_position < len &&
- cursor_position < min(result_len, prompt_width))
+ if (cursor_position < len) {
cursor_position++;
+ cursor_form_win++;
+ }
break;
case KEY_DOWN:
case KEY_LEFT:
- if (cursor_position > 0)
+ if (cursor_position > 0) {
cursor_position--;
+ cursor_form_win--;
+ }
+ break;
+ case KEY_HOME:
+ cursor_position = 0;
+ cursor_form_win = 0;
+ break;
+ case KEY_END:
+ cursor_position = len;
+ cursor_form_win = min(cursor_position, prompt_width-1);
break;
default:
- if ((isgraph(res) || isspace(res)) &&
- len-2 < result_len) {
+ if ((isgraph(res) || isspace(res))) {
+ /* one for new char, one for '\0' */
+ if (len+2 > *result_len) {
+ *result_len = len+2;
+ *resultp = result = realloc(result,
+ *result_len);
+ }
/* insert the char at the proper position */
memmove(&result[cursor_position+1],
&result[cursor_position],
- len+1);
+ len-cursor_position+1);
result[cursor_position] = res;
cursor_position++;
+ cursor_form_win++;
+ len++;
} else {
- mvprintw(0, 0, "unknow key: %d\n", res);
+ mvprintw(0, 0, "unknown key: %d\n", res);
}
break;
}
+ if (cursor_form_win < 0)
+ cursor_form_win = 0;
+ else if (cursor_form_win > prompt_width-1)
+ cursor_form_win = prompt_width-1;
+
wmove(form_win, 0, 0);
wclrtoeol(form_win);
mvwprintw(form_win, 0, 0, "%*s", prompt_width, " ");
- mvwprintw(form_win, 0, 0, "%s", result);
- wmove(form_win, 0, cursor_position);
+ mvwprintw(form_win, 0, 0, "%s",
+ result + cursor_position-cursor_form_win);
+ wmove(form_win, 0, cursor_form_win);
touchwin(win);
refresh_all_windows(main_window);
int btn_dialog(WINDOW *main_window, const char *msg, int btn_num, ...);
int dialog_inputbox(WINDOW *main_window,
const char *title, const char *prompt,
- const char *init, char *result, int result_len);
+ const char *init, char **resultp, int *result_len);
void refresh_all_windows(WINDOW *main_window);
void show_scroll_win(WINDOW *main_window,
const char *title,
# make oldconfig
#
use strict;
+use Getopt::Long;
my $config = ".config";
find_config;
+# Parse options
+my $localmodconfig = 0;
+my $localyesconfig = 0;
+
+GetOptions("localmodconfig" => \$localmodconfig,
+ "localyesconfig" => \$localyesconfig);
+
# Get the build source and top level Kconfig file (passed in)
my $ksource = $ARGV[0];
my $kconfig = $ARGV[1];
-my $lsmod_file = $ARGV[2];
+my $lsmod_file = $ENV{'LSMOD'};
my @makefiles = `find $ksource -name Makefile 2>/dev/null`;
chomp @makefiles;
if (defined($lsmod_file)) {
if ( ! -f $lsmod_file) {
- die "$lsmod_file not found";
+ if ( -f $ENV{'objtree'}."/".$lsmod_file) {
+ $lsmod_file = $ENV{'objtree'}."/".$lsmod_file;
+ } else {
+ die "$lsmod_file not found";
+ }
}
if ( -x $lsmod_file) {
# the file is executable, run it
if (/^(CONFIG.*)=(m|y)/) {
if (defined($configs{$1})) {
- $setconfigs{$1} = $2;
+ if ($localyesconfig) {
+ $setconfigs{$1} = 'y';
+ } else {
+ $setconfigs{$1} = $2;
+ }
} elsif ($2 eq "m") {
print "# $1 is not set\n";
next;
buf_printf(b, "};\n");
}
+static void add_intree_flag(struct buffer *b, int is_intree)
+{
+ if (is_intree)
+ buf_printf(b, "\nMODULE_INFO(intree, \"Y\");\n");
+}
+
static void add_staging_flag(struct buffer *b, const char *name)
{
static const char *staging_dir = "drivers/staging";
buf.pos = 0;
add_header(&buf, mod);
+ add_intree_flag(&buf, !external_module);
add_staging_flag(&buf, mod->name);
err |= add_versions(&buf, mod);
add_depends(&buf, mod, modules);
-I EXPORT_SYMBOL,EXPORT_SYMBOL_GPL \
-I DEFINE_TRACE,EXPORT_TRACEPOINT_SYMBOL,EXPORT_TRACEPOINT_SYMBOL_GPL \
--extra=+f --c-kinds=+px \
- --regex-asm='/^ENTRY\(([^)]*)\).*/\1/' \
+ --regex-asm='/^(ENTRY|_GLOBAL)\(([^)]*)\).*/\2/' \
--regex-c='/^SYSCALL_DEFINE[[:digit:]]?\(([^,)]*).*/sys_\1/' \
--regex-c++='/^TRACE_EVENT\(([^,)]*).*/trace_\1/' \
--regex-c++='/^DEFINE_EVENT\([^,)]*, *([^,)]*).*/trace_\1/'
emacs()
{
all_sources | xargs $1 -a \
- --regex='/^ENTRY(\([^)]*\)).*/\1/' \
+ --regex='/^(ENTRY|_GLOBAL)(\([^)]*\)).*/\2/' \
--regex='/^SYSCALL_DEFINE[0-9]?(\([^,)]*\).*/sys_\1/' \
--regex='/^TRACE_EVENT(\([^,)]*\).*/trace_\1/' \
--regex='/^DEFINE_EVENT([^,)]*, *\([^,)]*\).*/trace_\1/'
# Makefile for encrypted keys
#
-obj-$(CONFIG_ENCRYPTED_KEYS) += encrypted.o ecryptfs_format.o
-obj-$(CONFIG_TRUSTED_KEYS) += masterkey_trusted.o
+obj-$(CONFIG_ENCRYPTED_KEYS) += encrypted-keys.o
+
+encrypted-keys-y := encrypted.o ecryptfs_format.o
+masterkey-$(CONFIG_TRUSTED_KEYS) := masterkey_trusted.o
+masterkey-$(CONFIG_TRUSTED_KEYS)-$(CONFIG_ENCRYPTED_KEYS) := masterkey_trusted.o
+encrypted-keys-y += $(masterkey-y) $(masterkey-m-m)
goto out;
if (IS_ERR(mkey)) {
- int ret = PTR_ERR(epayload);
+ int ret = PTR_ERR(mkey);
if (ret == -ENOTSUPP)
pr_info("encrypted_key: key %s not supported",
#define __ENCRYPTED_KEY_H
#define ENCRYPTED_DEBUG 0
-#ifdef CONFIG_TRUSTED_KEYS
+#if defined(CONFIG_TRUSTED_KEYS) || \
+ (defined(CONFIG_TRUSTED_KEYS_MODULE) && defined(CONFIG_ENCRYPTED_KEYS_MODULE))
extern struct key *request_trusted_key(const char *trusted_desc,
u8 **master_key, size_t *master_keylen);
#else
key->expiry = 0;
}
- kfree_rcu(zap, rcu);
+ if (zap)
+ kfree_rcu(zap, rcu);
error:
return ret;
#include <linux/posix-timers.h>
#include <linux/syslog.h>
#include <linux/user_namespace.h>
+#include <linux/export.h>
#include "avc.h"
#include "objsec.h"
#include <linux/slab.h>
#include <linux/stddef.h>
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/skbuff.h>
#include <linux/netlink.h>
#include <linux/selinux_netlink.h>
const char *smack_cipso_option = SMACK_CIPSO_OPTION;
-
-#define SEQ_READ_FINISHED ((loff_t)-1)
-
/*
* Values for parsing cipso rules
* SMK_DIGITLEN: Length of a digit field in a rule.
rc = count;
/*
+ * If this is "load" as opposed to "load-self" and a new rule
+ * it needs to get added for reporting.
* smk_set_access returns true if there was already a rule
* for the subject/object pair, and false if it was new.
*/
- if (!smk_set_access(rule, rule_list, rule_lock)) {
+ if (load && !smk_set_access(rule, rule_list, rule_lock)) {
smlp = kzalloc(sizeof(*smlp), GFP_KERNEL);
if (smlp != NULL) {
smlp->smk_rule = rule;
return rc;
}
-
/*
- * Seq_file read operations for /smack/load
+ * Core logic for smackfs seq list operations.
*/
-static void *load_seq_start(struct seq_file *s, loff_t *pos)
+static void *smk_seq_start(struct seq_file *s, loff_t *pos,
+ struct list_head *head)
{
struct list_head *list;
* This is 0 the first time through.
*/
if (s->index == 0)
- s->private = &smack_rule_list;
+ s->private = head;
if (s->private == NULL)
return NULL;
return list;
}
-static void *load_seq_next(struct seq_file *s, void *v, loff_t *pos)
+static void *smk_seq_next(struct seq_file *s, void *v, loff_t *pos,
+ struct list_head *head)
{
struct list_head *list = v;
- if (list_is_last(list, &smack_rule_list)) {
+ if (list_is_last(list, head)) {
s->private = NULL;
return NULL;
}
return list->next;
}
+static void smk_seq_stop(struct seq_file *s, void *v)
+{
+ /* No-op */
+}
+
+/*
+ * Seq_file read operations for /smack/load
+ */
+
+static void *load_seq_start(struct seq_file *s, loff_t *pos)
+{
+ return smk_seq_start(s, pos, &smack_rule_list);
+}
+
+static void *load_seq_next(struct seq_file *s, void *v, loff_t *pos)
+{
+ return smk_seq_next(s, v, pos, &smack_rule_list);
+}
+
static int load_seq_show(struct seq_file *s, void *v)
{
struct list_head *list = v;
return 0;
}
-static void load_seq_stop(struct seq_file *s, void *v)
-{
- /* No-op */
-}
-
static const struct seq_operations load_seq_ops = {
.start = load_seq_start,
.next = load_seq_next,
.show = load_seq_show,
- .stop = load_seq_stop,
+ .stop = smk_seq_stop,
};
/**
static void *cipso_seq_start(struct seq_file *s, loff_t *pos)
{
- if (*pos == SEQ_READ_FINISHED)
- return NULL;
- if (list_empty(&smack_known_list))
- return NULL;
-
- return smack_known_list.next;
+ return smk_seq_start(s, pos, &smack_known_list);
}
static void *cipso_seq_next(struct seq_file *s, void *v, loff_t *pos)
{
- struct list_head *list = v;
-
- /*
- * labels with no associated cipso value wont be printed
- * in cipso_seq_show
- */
- if (list_is_last(list, &smack_known_list)) {
- *pos = SEQ_READ_FINISHED;
- return NULL;
- }
-
- return list->next;
+ return smk_seq_next(s, v, pos, &smack_known_list);
}
/*
return 0;
}
-static void cipso_seq_stop(struct seq_file *s, void *v)
-{
- /* No-op */
-}
-
static const struct seq_operations cipso_seq_ops = {
.start = cipso_seq_start,
- .stop = cipso_seq_stop,
.next = cipso_seq_next,
.show = cipso_seq_show,
+ .stop = smk_seq_stop,
};
/**
static void *netlbladdr_seq_start(struct seq_file *s, loff_t *pos)
{
- if (*pos == SEQ_READ_FINISHED)
- return NULL;
- if (list_empty(&smk_netlbladdr_list))
- return NULL;
- return smk_netlbladdr_list.next;
+ return smk_seq_start(s, pos, &smk_netlbladdr_list);
}
static void *netlbladdr_seq_next(struct seq_file *s, void *v, loff_t *pos)
{
- struct list_head *list = v;
-
- if (list_is_last(list, &smk_netlbladdr_list)) {
- *pos = SEQ_READ_FINISHED;
- return NULL;
- }
-
- return list->next;
+ return smk_seq_next(s, v, pos, &smk_netlbladdr_list);
}
#define BEBITS (sizeof(__be32) * 8)
return 0;
}
-static void netlbladdr_seq_stop(struct seq_file *s, void *v)
-{
- /* No-op */
-}
-
static const struct seq_operations netlbladdr_seq_ops = {
.start = netlbladdr_seq_start,
- .stop = netlbladdr_seq_stop,
.next = netlbladdr_seq_next,
.show = netlbladdr_seq_show,
+ .stop = smk_seq_stop,
};
/**
{
struct task_smack *tsp = current_security();
- if (*pos == SEQ_READ_FINISHED)
- return NULL;
- if (list_empty(&tsp->smk_rules))
- return NULL;
- return tsp->smk_rules.next;
+ return smk_seq_start(s, pos, &tsp->smk_rules);
}
static void *load_self_seq_next(struct seq_file *s, void *v, loff_t *pos)
{
struct task_smack *tsp = current_security();
- struct list_head *list = v;
- if (list_is_last(list, &tsp->smk_rules)) {
- *pos = SEQ_READ_FINISHED;
- return NULL;
- }
- return list->next;
+ return smk_seq_next(s, v, pos, &tsp->smk_rules);
}
static int load_self_seq_show(struct seq_file *s, void *v)
return 0;
}
-static void load_self_seq_stop(struct seq_file *s, void *v)
-{
- /* No-op */
-}
-
static const struct seq_operations load_self_seq_ops = {
.start = load_self_seq_start,
.next = load_self_seq_next,
.show = load_self_seq_show,
- .stop = load_self_seq_stop,
+ .stop = smk_seq_stop,
};
#include <sound/core.h>
#include <asm/macio.h>
#include <linux/pci.h>
+#include <linux/module.h>
#include "../soundbus.h"
#include "i2sbus.h"
#include <linux/interrupt.h>
#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/module.h>
#include <sound/ac97_codec.h>
#include <sound/pxa2xx-lib.h>
* published by the Free Software Foundation.
*/
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/pxa2xx-lib.h>
#include <linux/threads.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/time.h>
char *names, *p;
size_t buf_len, name_len;
unsigned int i;
+ const uintptr_t user_ptrval = ue->info.value.enumerated.names_ptr;
if (ue->info.value.enumerated.names_length > 64 * 1024)
return -EINVAL;
- names = memdup_user(
- (const void __user *)ue->info.value.enumerated.names_ptr,
+ names = memdup_user((const void __user *)user_ptrval,
ue->info.value.enumerated.names_length);
if (IS_ERR(names))
return PTR_ERR(names);
#include <linux/slab.h>
#include <linux/time.h>
+#include <linux/export.h>
#include <linux/errno.h>
#include <sound/core.h>
#include <linux/slab.h>
#include <linux/time.h>
#include <linux/mutex.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/control.h>
#include <sound/minors.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/string.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/minors.h>
#include <sound/info.h>
#include <linux/slab.h>
#include <linux/time.h>
#include <linux/string.h>
+#include <linux/export.h>
#include <sound/core.h>
#include <sound/minors.h>
#include <sound/info.h>
#include <linux/init.h>
#include <linux/sched.h>
+#include <linux/module.h>
#include <linux/file.h>
#include <linux/slab.h>
#include <linux/time.h>
#undef HAVE_REALLY_SLOW_DMA_CONTROLLER
+#include <linux/export.h>
#include <sound/core.h>
#include <asm/dma.h>
#include <linux/input.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <sound/jack.h>
#include <sound/core.h>
*
*/
+#include <linux/export.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <sound/core.h>
*/
#include <linux/init.h>
+#include <linux/export.h>
+#include <linux/moduleparam.h>
#include <linux/time.h>
#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/time.h>
#include <linux/string.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/minors.h>
#include <sound/control.h>
#include <linux/slab.h>
#include <linux/time.h>
#include <linux/vmalloc.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/math64.h>
#include <linux/string.h>
#include <sound/core.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <linux/time.h>
#include <linux/mutex.h>
#include <sound/core.h>
#include <linux/slab.h>
#include <linux/time.h>
#include <linux/math64.h>
+#include <linux/export.h>
#include <sound/core.h>
#include <sound/control.h>
#include <sound/info.h>
#include <linux/slab.h>
#include <linux/moduleparam.h>
#include <linux/vmalloc.h>
+#include <linux/export.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/info.h>
*/
#include <linux/time.h>
+#include <linux/export.h>
#include <sound/core.h>
#include <sound/pcm.h>
#define SND_PCM_FORMAT_UNKNOWN (-1)
*/
#include <linux/mm.h>
+#include <linux/module.h>
#include <linux/file.h>
#include <linux/slab.h>
#include <linux/time.h>
#include <linux/time.h>
#include <linux/wait.h>
#include <linux/mutex.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/delay.h>
#include <sound/rawmidi.h>
#include <sound/info.h>
*/
#include <linux/init.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/mutex.h>
#include <sound/core.h>
#include <sound/minors.h>
#include "seq_oss_timer.h"
#include "seq_oss_event.h"
#include <linux/init.h>
+#include <linux/export.h>
#include <linux/moduleparam.h>
#include <linux/slab.h>
#include "seq_oss_midi.h"
#include "../seq_lock.h"
#include <linux/init.h>
+#include <linux/module.h>
#include <linux/slab.h>
/*
*/
#include <linux/init.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/initval.h>
*/
#include <linux/init.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <sound/core.h>
#include <sound/minors.h>
*/
#include <linux/init.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/info.h>
#include <sound/seq_device.h>
#include <linux/init.h>
#include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include "seq_clientmgr.h"
#include <sound/initval.h>
*/
#include <linux/init.h>
+#include <linux/export.h>
#include <sound/core.h>
#include "seq_info.h"
*
*/
+#include <linux/export.h>
#include <sound/core.h>
#include "seq_lock.h"
*/
#include <linux/init.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <sound/core.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/string.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/mutex.h>
#include <sound/core.h>
#include <sound/rawmidi.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/string.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/seq_kernel.h>
#include <sound/seq_midi_emul.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/string.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/seq_kernel.h>
#include <sound/seq_midi_event.h>
#include <sound/core.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include "seq_system.h"
#include "seq_ports.h"
#include "seq_clientmgr.h"
*/
#include <linux/init.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <sound/core.h>
#include "seq_system.h"
#include <linux/init.h>
#include <linux/wait.h>
+#include <linux/module.h>
#include <linux/slab.h>
#include <sound/core.h>
#include <sound/rawmidi.h>
#include <linux/slab.h>
#include <linux/time.h>
#include <linux/device.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/minors.h>
#include <sound/info.h>
#endif
#include <linux/init.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <linux/time.h>
#include <sound/core.h>
#include <linux/slab.h>
#include <linux/time.h>
#include <linux/mutex.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/string.h>
#include <sound/core.h>
#include <sound/timer.h>
*/
#include <linux/slab.h>
+#include <linux/export.h>
#include <sound/core.h>
#include <sound/control.h>
#include <sound/tlv.h>
struct link_ctl_info info;
int vals[2]; /* current values */
unsigned int flags;
+ struct snd_kcontrol *kctl; /* original kcontrol pointer */
struct snd_kcontrol slave; /* the copy of original control entry */
};
slave->count * sizeof(*slave->vd), GFP_KERNEL);
if (!srec)
return -ENOMEM;
+ srec->kctl = slave;
srec->slave = *slave;
memcpy(srec->slave.vd, slave->vd, slave->count * sizeof(*slave->vd));
srec->master = master_link;
static void master_free(struct snd_kcontrol *kcontrol)
{
struct link_master *master = snd_kcontrol_chip(kcontrol);
- struct link_slave *slave;
-
- list_for_each_entry(slave, &master->slaves, list)
- slave->master = NULL;
+ struct link_slave *slave, *n;
+
+ /* free all slave links and retore the original slave kctls */
+ list_for_each_entry_safe(slave, n, &master->slaves, list) {
+ struct snd_kcontrol *sctl = slave->kctl;
+ struct list_head olist = sctl->list;
+ memcpy(sctl, &slave->slave, sizeof(*sctl));
+ memcpy(sctl->vd, slave->slave.vd,
+ sctl->count * sizeof(*sctl->vd));
+ sctl->list = olist; /* keep the current linked-list */
+ kfree(slave);
+ }
kfree(master);
}
#include <linux/slab.h>
#include <linux/time.h>
#include <linux/wait.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
#include <sound/core.h>
#include <sound/control.h>
#include <linux/wait.h>
#include <linux/hrtimer.h>
#include <linux/math64.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/control.h>
#include <sound/tlv.h>
*/
#include <linux/init.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pnp.h>
#include <linux/err.h>
#include <linux/platform_device.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/mpu401.h>
#include <sound/initval.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/ioport.h>
+#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <sound/core.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <linux/parport.h>
#include <linux/spinlock.h>
+#include <linux/module.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <sound/core.h>
#include <sound/opl3.h>
#include <asm/io.h>
#include <linux/delay.h>
+#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/ioport.h>
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/export.h>
#include "opl3_voice.h"
static int snd_opl3_open_seq_oss(struct snd_seq_oss_arg *arg, void *closure);
#include "opl3_voice.h"
#include <linux/init.h>
#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/initval.h>
MODULE_AUTHOR("Uros Bizjak <uros@kss-loka.si>");
*/
#include <linux/slab.h>
+#include <linux/export.h>
#include <sound/opl3.h>
#include <sound/asound_fm.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/init.h>
+#include <linux/module.h>
#include <asm/io.h>
MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
#include "opl4_local.h"
#include <linux/vmalloc.h>
+#include <linux/export.h>
#include <sound/info.h>
#ifdef CONFIG_PROC_FS
#include "opl4_local.h"
#include <linux/init.h>
#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/initval.h>
MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
*/
#include <linux/init.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <linux/spinlock.h>
#include <linux/delay.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <sound/rawmidi.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/ioport.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/rawmidi.h>
#include <sound/initval.h>
#include <linux/wait.h>
#include <linux/err.h>
#include <linux/platform_device.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/seq_kernel.h>
#include <sound/seq_virmidi.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/firmware.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/asoundef.h>
#include <linux/firmware.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/hwdep.h>
#include <sound/vx_core.h>
#include <linux/device.h>
#include <linux/firewire.h>
#include <linux/firewire-constants.h>
+#include <linux/export.h>
#include <linux/jiffies.h>
#include <linux/mutex.h>
#include <linux/sched.h>
*/
#include <linux/firewire.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include "packets-buffer.h"
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/bitrev.h>
+#include <linux/module.h>
#include <asm/unaligned.h>
#include <sound/core.h>
#include <sound/control.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <sound/core.h>
#include <linux/slab.h>
#include <linux/delay.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/control.h>
#include <sound/pcm.h>
#include <linux/slab.h>
#include <linux/delay.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/control.h>
#include <sound/pcm.h>
#include <linux/slab.h>
#include <linux/delay.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/control.h>
#include <sound/pcm.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/init.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/control.h>
#include <sound/tlv.h>
#include <sound/tlv.h>
#include <sound/i2c.h>
#include <sound/pt2258.h>
+#include <linux/module.h>
MODULE_AUTHOR("Jochen Voss <voss@seehuhn.de>");
MODULE_DESCRIPTION("PT2258 volume controller (Princeton Technology Corp.)");
#include <asm/io.h>
#include <linux/delay.h>
+#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/version.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/control.h>
#include <sound/tea6330t.h>
#include <linux/time.h>
#include <linux/wait.h>
#include <linux/pnp.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <sound/ad1816a.h>
#include <linux/isa.h>
#include <linux/time.h>
#include <linux/wait.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/wss.h>
#include <sound/initval.h>
#include <linux/wait.h>
#include <linux/time.h>
#include <linux/pnp.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <sound/mpu401.h>
#include <linux/time.h>
#include <linux/wait.h>
#include <linux/pnp.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <sound/wss.h>
#include <linux/err.h>
#include <linux/isa.h>
#include <linux/pnp.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/wss.h>
#include <sound/opl3.h>
#include <linux/isa.h>
#include <linux/time.h>
#include <linux/wait.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/wss.h>
#include <sound/mpu401.h>
#include <linux/err.h>
#include <linux/isa.h>
#include <linux/pnp.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/wss.h>
#include <sound/mpu401.h>
#include <linux/isapnp.h>
#include <linux/time.h>
#include <linux/wait.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <asm/dma.h>
#include <sound/core.h>
#include <sound/es1688.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/ioport.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/es1688.h>
#include <sound/initval.h>
#include <linux/isa.h>
#include <linux/pnp.h>
#include <linux/isapnp.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/delay.h>
#include <asm/io.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/ioport.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/gus.h>
#include <sound/control.h>
*/
#include <linux/time.h>
+#include <linux/export.h>
#include <sound/core.h>
#include <sound/gus.h>
#define __GUS_TABLES_ALLOC__
#include <linux/isa.h>
#include <linux/delay.h>
#include <linux/time.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <asm/dma.h>
#include <sound/core.h>
#include <sound/gus.h>
#include <linux/isa.h>
#include <linux/delay.h>
#include <linux/time.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <asm/dma.h>
#include <sound/core.h>
#include <sound/gus.h>
#include <linux/isa.h>
#include <linux/delay.h>
#include <linux/time.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <asm/dma.h>
#include <sound/core.h>
#include <sound/gus.h>
#include <linux/isa.h>
#include <linux/delay.h>
#include <linux/pnp.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <asm/dma.h>
#include <sound/core.h>
#include <sound/gus.h>
#include <linux/io.h>
#include <linux/fs.h>
#include <linux/delay.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/errno.h>
+#include <linux/export.h>
#include <sound/core.h>
#include <sound/rawmidi.h>
***************************************************************************/
#include <linux/io.h>
+#include <linux/export.h>
#include <sound/core.h>
#include <sound/control.h>
#include <linux/interrupt.h>
#include <linux/pm.h>
#include <linux/pnp.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/wss.h>
#include <sound/mpu401.h>
#include <linux/pnp.h>
#include <linux/delay.h>
#include <linux/ioport.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <asm/io.h>
#include <asm/dma.h>
#include <sound/core.h>
#include <linux/isa.h>
#include <linux/delay.h>
#include <linux/pnp.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <asm/io.h>
#include <asm/dma.h>
#include <sound/core.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/ioport.h>
+#include <linux/export.h>
#include <linux/delay.h>
#include <sound/core.h>
#include <sound/emu8000.h>
*/
#include "emu8000_local.h"
+#include <linux/export.h>
#include <sound/asoundef.h>
/*
#include "emu8000_local.h"
#include <asm/uaccess.h>
#include <linux/moduleparam.h>
+#include <linux/moduleparam.h>
static int emu8000_reset_addr;
module_param(emu8000_reset_addr, int, 0444);
#include "emu8000_local.h"
#include <linux/init.h>
+#include <linux/module.h>
#include <sound/initval.h>
MODULE_AUTHOR("Takashi Iwai, Steve Ratcliffe");
#include <linux/pnp.h>
#include <linux/err.h>
#include <linux/isa.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/sb.h>
#include <sound/sb16_csp.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/control.h>
#include <sound/info.h>
#include <asm/dma.h>
#include <linux/init.h>
#include <linux/time.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/sb.h>
#include <sound/sb16_csp.h>
#include <linux/err.h>
#include <linux/isa.h>
#include <linux/ioport.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/sb.h>
#include <sound/opl3.h>
#include <asm/dma.h>
#include <linux/init.h>
#include <linux/time.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/sb.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/ioport.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/sb.h>
#include <sound/initval.h>
#include <linux/firmware.h>
#include <linux/pnp.h>
#include <linux/spinlock.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <asm/dma.h>
#include <sound/core.h>
#include <sound/wss.h>
#include <linux/err.h>
#include <linux/isa.h>
#include <linux/pnp.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <sound/opl3.h>
#include <linux/time.h>
#include <linux/wait.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <linux/firmware.h>
#include <sound/core.h>
#include <sound/snd_wavefront.h>
#include <linux/firmware.h>
#include <linux/moduleparam.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/snd_wavefront.h>
#include <sound/initval.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/ioport.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/wss.h>
#include <sound/pcm_params.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <sound/pcm.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <asm/sgi/hpc3.h>
#include <asm/sgi/ip22.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <asm/ip32/ip32_ints.h>
#include <asm/ip32/mace.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/mutex.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/mutex.h>
+#include <linux/export.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <linux/interrupt.h>
#include <linux/compiler.h>
#include <linux/delay.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/mutex.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/ak4531_codec.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <linux/delay.h>
#include <linux/init.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/gameport.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <linux/slab.h>
#include <linux/time.h>
#include <linux/wait.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/control.h>
#include <sound/pcm.h>
#include <asm/uaccess.h>
#include <linux/pci.h>
#include <linux/stringify.h>
+#include <linux/module.h>
#ifdef MODULE_FIRMWARE
MODULE_FIRMWARE("asihpi/dsp5000.bin");
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/mutex.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/mutex.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <sound/initval.h>
#include <sound/core.h>
#include "au88x0.h"
#include <linux/gameport.h>
+#include <linux/export.h>
#if defined(CONFIG_GAMEPORT) || (defined(MODULE) && defined(CONFIG_GAMEPORT_MODULE))
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <sound/pcm.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/gameport.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/control.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/bitops.h>
#include <asm/io.h>
#include <sound/core.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/gameport.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/mutex.h>
#include <sound/core.h>
#include <sound/info.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/gameport.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/control.h>
#include <sound/pcm.h>
#include <linux/pci.h>
#include <linux/time.h>
#include <linux/init.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/cs46xx.h>
#include <sound/initval.h>
#include <linux/slab.h>
#include <linux/gameport.h>
#include <linux/mutex.h>
+#include <linux/export.h>
#include <sound/core.h>
*/
#include <linux/delay.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <sound/core.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <asm/io.h>
#include <sound/core.h>
#include <sound/control.h>
#include <linux/pci.h>
#include <linux/moduleparam.h>
#include <linux/pci_ids.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/initval.h>
#include "ctatc.h"
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/firmware.h>
#include <linux/slab.h>
#include <sound/core.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/firmware.h>
#include <linux/slab.h>
#include <sound/core.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/firmware.h>
#include <linux/slab.h>
#include <sound/core.h>
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
+#include <linux/module.h>
+
MODULE_AUTHOR("Giuliano Pochini <pochini@shiny.it>");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Echoaudio " ECHOCARD_NAME " soundcards driver");
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/firmware.h>
#include <linux/slab.h>
#include <sound/core.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/firmware.h>
#include <linux/slab.h>
#include <sound/core.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/firmware.h>
#include <linux/slab.h>
#include <sound/core.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/firmware.h>
#include <linux/slab.h>
#include <sound/core.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/firmware.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/firmware.h>
#include <linux/slab.h>
#include <sound/core.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/firmware.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/firmware.h>
#include <linux/slab.h>
#include <sound/core.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/firmware.h>
#include <linux/slab.h>
#include <sound/core.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/firmware.h>
#include <linux/slab.h>
#include <sound/core.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/firmware.h>
#include <linux/slab.h>
#include <sound/core.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/time.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/emu10k1.h>
#include <sound/initval.h>
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/export.h>
#include "emu10k1_synth_local.h"
#include <sound/asoundef.h>
#include <linux/kthread.h>
#include <linux/delay.h>
#include <linux/init.h>
+#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include "emu10k1_synth_local.h"
#include <linux/init.h>
+#include <linux/module.h>
MODULE_AUTHOR("Takashi Iwai");
MODULE_DESCRIPTION("Routines for control of EMU10K1 WaveTable synth");
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <sound/pcm.h>
#include <sound/core.h>
#include <sound/emu10k1.h>
#include <linux/delay.h>
+#include <linux/export.h>
#include "p17v.h"
unsigned int snd_emu10k1_ptr_read(struct snd_emu10k1 * emu, unsigned int reg, unsigned int chn)
#include <linux/gfp.h>
#include <linux/time.h>
#include <linux/mutex.h>
+#include <linux/export.h>
#include <sound/core.h>
#include <sound/emu10k1.h>
*/
#include <linux/time.h>
+#include <linux/export.h>
#include <sound/core.h>
#include <sound/emu10k1.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/gameport.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/mutex.h>
#include <sound/core.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/gameport.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/gameport.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/tlv.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
+#include <linux/export.h>
#include <sound/core.h>
#include "hda_beep.h"
#include "hda_local.h"
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/mutex.h>
+#include <linux/module.h>
#include <sound/core.h>
#include "hda_codec.h"
#include <sound/asoundef.h>
return 0;
}
+typedef int (*map_slave_func_t)(void *, struct snd_kcontrol *);
+
+/* apply the function to all matching slave ctls in the mixer list */
+static int map_slaves(struct hda_codec *codec, const char * const *slaves,
+ map_slave_func_t func, void *data)
+{
+ struct hda_nid_item *items;
+ const char * const *s;
+ int i, err;
+
+ items = codec->mixers.list;
+ for (i = 0; i < codec->mixers.used; i++) {
+ struct snd_kcontrol *sctl = items[i].kctl;
+ if (!sctl || !sctl->id.name ||
+ sctl->id.iface != SNDRV_CTL_ELEM_IFACE_MIXER)
+ continue;
+ for (s = slaves; *s; s++) {
+ if (!strcmp(sctl->id.name, *s)) {
+ err = func(data, sctl);
+ if (err)
+ return err;
+ break;
+ }
+ }
+ }
+ return 0;
+}
+
+static int check_slave_present(void *data, struct snd_kcontrol *sctl)
+{
+ return 1;
+}
+
/**
* snd_hda_add_vmaster - create a virtual master control and add slaves
* @codec: HD-audio codec
unsigned int *tlv, const char * const *slaves)
{
struct snd_kcontrol *kctl;
- const char * const *s;
int err;
- for (s = slaves; *s && !snd_hda_find_mixer_ctl(codec, *s); s++)
- ;
- if (!*s) {
+ err = map_slaves(codec, slaves, check_slave_present, NULL);
+ if (err != 1) {
snd_printdd("No slave found for %s\n", name);
return 0;
}
if (err < 0)
return err;
- for (s = slaves; *s; s++) {
- struct snd_kcontrol *sctl;
- int i = 0;
- for (;;) {
- sctl = _snd_hda_find_mixer_ctl(codec, *s, i);
- if (!sctl) {
- if (!i)
- snd_printdd("Cannot find slave %s, "
- "skipped\n", *s);
- break;
- }
- err = snd_ctl_add_slave(kctl, sctl);
- if (err < 0)
- return err;
- i++;
- }
- }
+ err = map_slaves(codec, slaves, (map_slave_func_t)snd_ctl_add_slave,
+ kctl);
+ if (err < 0)
+ return err;
return 0;
}
EXPORT_SYMBOL_HDA(snd_hda_add_vmaster);
memset(sequences_hp, 0, sizeof(sequences_hp));
assoc_line_out = 0;
+ codec->ignore_misc_bit = true;
end_nid = codec->start_nid + codec->num_nodes;
for (nid = codec->start_nid; nid < end_nid; nid++) {
unsigned int wid_caps = get_wcaps(codec, nid);
continue;
def_conf = snd_hda_codec_get_pincfg(codec, nid);
+ if (!(get_defcfg_misc(snd_hda_codec_get_pincfg(codec, nid)) &
+ AC_DEFCFG_MISC_NO_PRESENCE))
+ codec->ignore_misc_bit = false;
conn = get_defcfg_connect(def_conf);
if (conn == AC_JACK_PORT_NONE)
continue;
unsigned int no_sticky_stream:1; /* no sticky-PCM stream assignment */
unsigned int pins_shutup:1; /* pins are shut up */
unsigned int no_trigger_sense:1; /* don't trigger at pin-sensing */
+ unsigned int ignore_misc_bit:1; /* ignore MISC_NO_PRESENCE bit */
#ifdef CONFIG_SND_HDA_POWER_SAVE
unsigned int power_on :1; /* current (global) power-state */
unsigned int power_transition :1; /* power-state in transition */
buf + ELD_FIXED_BYTES + mnl + 3 * i);
}
+ /*
+ * HDMI sink's ELD info cannot always be retrieved for now, e.g.
+ * in console or for audio devices. Assume the highest speakers
+ * configuration, to _not_ prohibit multi-channel audio playback.
+ */
+ if (!e->spk_alloc)
+ e->spk_alloc = 0xffff;
+
+ e->eld_valid = true;
return 0;
out_fail:
- e->eld_ver = 0;
return -EINVAL;
}
* ELD is valid, actual eld_size is assigned in hdmi_update_eld()
*/
- if (!eld->eld_valid)
- return -ENOENT;
-
size = snd_hdmi_get_eld_size(codec, nid);
if (size == 0) {
/* wfg: workaround for ASUS P5E-VM HDMI board */
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <sound/core.h>
#include "hda_codec.h"
#include "hda_local.h"
#include <linux/ctype.h>
#include <linux/string.h>
#include <linux/firmware.h>
+#include <linux/export.h>
#include <sound/core.h>
#include "hda_codec.h"
#include "hda_local.h"
.class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8,
.class_mask = 0xffffff,
.driver_data = AZX_DRIVER_CTX | AZX_DCAPS_CTX_WORKAROUND |
- AZX_DCAPS_RIRB_PRE_DELAY },
+ AZX_DCAPS_RIRB_PRE_DELAY | AZX_DCAPS_POSFIX_LPIB },
#else
/* this entry seems still valid -- i.e. without emu20kx chip */
{ PCI_DEVICE(0x1102, 0x0009),
.driver_data = AZX_DRIVER_CTX | AZX_DCAPS_CTX_WORKAROUND |
- AZX_DCAPS_RIRB_PRE_DELAY },
+ AZX_DCAPS_RIRB_PRE_DELAY | AZX_DCAPS_POSFIX_LPIB },
#endif
/* Vortex86MX */
{ PCI_DEVICE(0x17f3, 0x3010), .driver_data = AZX_DRIVER_GENERIC },
static inline bool is_jack_detectable(struct hda_codec *codec, hda_nid_t nid)
{
- return (snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_PRES_DETECT) &&
- !(get_defcfg_misc(snd_hda_codec_get_pincfg(codec, nid) &
- AC_DEFCFG_MISC_NO_PRESENCE)) &&
- (get_wcaps(codec, nid) & AC_WCAP_UNSOL_CAP);
+ if (!(snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_PRES_DETECT))
+ return false;
+ if (!codec->ignore_misc_bit &&
+ (get_defcfg_misc(snd_hda_codec_get_pincfg(codec, nid)) &
+ AC_DEFCFG_MISC_NO_PRESENCE))
+ return false;
+ if (!(get_wcaps(codec, nid) & AC_WCAP_UNSOL_CAP))
+ return false;
+ return true;
}
/* flags for hda_nid_item */
int spk_alloc;
int sad_count;
struct cea_sad sad[ELD_MAX_SAD];
+ /*
+ * all fields above eld_buffer will be cleared before updating ELD
+ */
char eld_buffer[ELD_MAX_SIZE];
#ifdef CONFIG_PROC_FS
struct snd_info_entry *proc_entry;
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/pci.h>
+#include <linux/module.h>
#include <sound/core.h>
#include "hda_codec.h"
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/pci.h>
+#include <linux/module.h>
#include <sound/core.h>
#include "hda_codec.h"
#include "hda_local.h"
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/mutex.h>
+#include <linux/module.h>
#include <sound/core.h>
#include "hda_codec.h"
#include "hda_local.h"
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/pci.h>
+#include <linux/module.h>
#include <sound/core.h>
#include "hda_codec.h"
#include "hda_local.h"
return snd_hda_multi_out_dig_cleanup(codec, &spec->multiout);
}
+static void cs_update_input_select(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+ if (spec->cur_adc)
+ snd_hda_codec_write(codec, spec->cur_adc, 0,
+ AC_VERB_SET_CONNECT_SEL,
+ spec->adc_idx[spec->cur_input]);
+}
+
/*
* Analog capture
*/
spec->cur_adc = spec->adc_nid[spec->cur_input];
spec->cur_adc_stream_tag = stream_tag;
spec->cur_adc_format = format;
+ cs_update_input_select(codec);
snd_hda_codec_setup_stream(codec, spec->cur_adc, stream_tag, 0, format);
return 0;
}
spec->cur_adc_stream_tag, 0,
spec->cur_adc_format);
}
- snd_hda_codec_write(codec, spec->cur_adc, 0,
- AC_VERB_SET_CONNECT_SEL,
- spec->adc_idx[idx]);
spec->cur_input = idx;
+ cs_update_input_select(codec);
return 1;
}
} else {
spec->cur_input = spec->last_input;
}
-
- snd_hda_codec_write_cache(codec, spec->cur_adc, 0,
- AC_VERB_SET_CONNECT_SEL,
- spec->adc_idx[spec->cur_input]);
+ cs_update_input_select(codec);
} else {
if (present)
change_cur_input(codec, spec->automic_idx, 0);
cs_automic(codec);
else {
spec->cur_adc = spec->adc_nid[spec->cur_input];
- snd_hda_codec_write(codec, spec->cur_adc, 0,
- AC_VERB_SET_CONNECT_SEL,
- spec->adc_idx[spec->cur_input]);
+ cs_update_input_select(codec);
}
} else {
change_cur_input(codec, spec->cur_input, 1);
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/pci.h>
+#include <linux/module.h>
#include <sound/core.h>
#include "hda_codec.h"
#include "hda_local.h"
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/pci.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/jack.h>
SND_PCI_QUIRK(0x1043, 0x1993, "Asus U50F", CXT5066_ASUS),
SND_PCI_QUIRK(0x1179, 0xff1e, "Toshiba Satellite C650D", CXT5066_IDEAPAD),
SND_PCI_QUIRK(0x1179, 0xff50, "Toshiba Satellite P500-PSPGSC-01800T", CXT5066_OLPC_XO_1_5),
- SND_PCI_QUIRK(0x1179, 0xffe0, "Toshiba Satellite Pro T130-15F", CXT5066_OLPC_XO_1_5),
SND_PCI_QUIRK(0x14f1, 0x0101, "Conexant Reference board",
CXT5066_LAPTOP),
SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT5066_OLPC_XO_1_5),
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/jack.h>
#include "hda_codec.h"
hda_nid_t pin_nid;
int num_mux_nids;
hda_nid_t mux_nids[HDA_MAX_CONNECTIONS];
+
+ struct hda_codec *codec;
struct hdmi_eld sink_eld;
+ struct delayed_work work;
};
struct hdmi_spec {
* Unsolicited events
*/
-static void hdmi_present_sense(struct hda_codec *codec, hda_nid_t pin_nid,
- struct hdmi_eld *eld);
+static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, bool retry);
static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res)
{
int pd = !!(res & AC_UNSOL_RES_PD);
int eldv = !!(res & AC_UNSOL_RES_ELDV);
int pin_idx;
- struct hdmi_eld *eld;
printk(KERN_INFO
"HDMI hot plug event: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n",
pin_idx = pin_nid_to_pin_index(spec, pin_nid);
if (pin_idx < 0)
return;
- eld = &spec->pins[pin_idx].sink_eld;
-
- hdmi_present_sense(codec, pin_nid, eld);
- /*
- * HDMI sink's ELD info cannot always be retrieved for now, e.g.
- * in console or for audio devices. Assume the highest speakers
- * configuration, to _not_ prohibit multi-channel audio playback.
- */
- if (!eld->spk_alloc)
- eld->spk_alloc = 0xffff;
+ hdmi_present_sense(&spec->pins[pin_idx], true);
}
static void hdmi_non_intrinsic_event(struct hda_codec *codec, unsigned int res)
return 0;
}
-static void hdmi_present_sense(struct hda_codec *codec, hda_nid_t pin_nid,
- struct hdmi_eld *eld)
+static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, bool retry)
{
+ struct hda_codec *codec = per_pin->codec;
+ struct hdmi_eld *eld = &per_pin->sink_eld;
+ hda_nid_t pin_nid = per_pin->pin_nid;
/*
* Always execute a GetPinSense verb here, even when called from
* hdmi_intrinsic_event; for some NVIDIA HW, the unsolicited
* the unsolicited response to avoid custom WARs.
*/
int present = snd_hda_pin_sense(codec, pin_nid);
+ bool eld_valid = false;
- memset(eld, 0, sizeof(*eld));
+ memset(eld, 0, offsetof(struct hdmi_eld, eld_buffer));
eld->monitor_present = !!(present & AC_PINSENSE_PRESENCE);
if (eld->monitor_present)
- eld->eld_valid = !!(present & AC_PINSENSE_ELDV);
- else
- eld->eld_valid = 0;
+ eld_valid = !!(present & AC_PINSENSE_ELDV);
printk(KERN_INFO
"HDMI status: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n",
- codec->addr, pin_nid, eld->monitor_present, eld->eld_valid);
+ codec->addr, pin_nid, eld->monitor_present, eld_valid);
- if (eld->eld_valid)
+ if (eld_valid) {
if (!snd_hdmi_get_eld(eld, codec, pin_nid))
snd_hdmi_show_eld(eld);
+ else if (retry) {
+ queue_delayed_work(codec->bus->workq,
+ &per_pin->work,
+ msecs_to_jiffies(300));
+ }
+ }
snd_hda_input_jack_report(codec, pin_nid);
}
+static void hdmi_repoll_eld(struct work_struct *work)
+{
+ struct hdmi_spec_per_pin *per_pin =
+ container_of(to_delayed_work(work), struct hdmi_spec_per_pin, work);
+
+ hdmi_present_sense(per_pin, false);
+}
+
static int hdmi_add_pin(struct hda_codec *codec, hda_nid_t pin_nid)
{
struct hdmi_spec *spec = codec->spec;
if (err < 0)
return err;
- hdmi_present_sense(codec, per_pin->pin_nid, &per_pin->sink_eld);
+ hdmi_present_sense(per_pin, false);
return 0;
}
AC_VERB_SET_UNSOLICITED_ENABLE,
AC_USRSP_EN | pin_nid);
+ per_pin->codec = codec;
+ INIT_DELAYED_WORK(&per_pin->work, hdmi_repoll_eld);
snd_hda_eld_proc_new(codec, eld, pin_idx);
}
return 0;
struct hdmi_spec_per_pin *per_pin = &spec->pins[pin_idx];
struct hdmi_eld *eld = &per_pin->sink_eld;
+ cancel_delayed_work(&per_pin->work);
snd_hda_eld_proc_free(codec, eld);
}
snd_hda_input_jack_free(codec);
+ flush_workqueue(codec->bus->workq);
kfree(spec);
}
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/pci.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/jack.h>
#include "hda_codec.h"
struct alc_spec *spec = codec->spec;
const struct hda_input_mux *imux;
unsigned int mux_idx;
- int i, type;
+ int i, type, num_conns;
hda_nid_t nid;
mux_idx = adc_idx >= spec->num_mux_defs ? 0 : adc_idx;
spec->capsrc_nids[adc_idx] : spec->adc_nids[adc_idx];
/* no selection? */
- if (snd_hda_get_conn_list(codec, nid, NULL) <= 1)
+ num_conns = snd_hda_get_conn_list(codec, nid, NULL);
+ if (num_conns <= 1)
return 1;
type = get_wcaps_type(get_wcaps(codec, nid));
if (type == AC_WID_AUD_MIX) {
/* Matrix-mixer style (e.g. ALC882) */
- for (i = 0; i < imux->num_items; i++) {
- unsigned int v = (i == idx) ? 0 : HDA_AMP_MUTE;
- snd_hda_codec_amp_stereo(codec, nid, HDA_INPUT,
- imux->items[i].index,
+ int active = imux->items[idx].index;
+ for (i = 0; i < num_conns; i++) {
+ unsigned int v = (i == active) ? 0 : HDA_AMP_MUTE;
+ snd_hda_codec_amp_stereo(codec, nid, HDA_INPUT, i,
HDA_AMP_MUTE, v);
}
} else {
switch (fix->type) {
case ALC_FIXUP_SKU:
if (action != ALC_FIXUP_ACT_PRE_PROBE || !fix->v.sku)
- break;;
+ break;
snd_printdd(KERN_INFO "hda_codec: %s: "
"Apply sku override for %s\n",
codec->chip_name, modelname);
if (nid)
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
AMP_OUT_ZERO);
+
+ /* unmute DAC if it's not assigned to a mixer */
+ nid = alc_look_for_out_mute_nid(codec, pin, dac);
+ if (nid == mix && nid_has_mute(codec, dac, HDA_OUTPUT))
+ snd_hda_codec_write(codec, dac, 0, AC_VERB_SET_AMP_GAIN_MUTE,
+ AMP_OUT_ZERO);
}
static void alc_auto_init_multi_out(struct hda_codec *codec)
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <sound/core.h>
#include "hda_codec.h"
#include "hda_local.h"
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/dmi.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/asoundef.h>
#include <sound/jack.h>
STAC_92HD83XXX_REF,
STAC_92HD83XXX_PWR_REF,
STAC_DELL_S14,
+ STAC_DELL_VOSTRO_3500,
STAC_92HD83XXX_HP,
STAC_92HD83XXX_HP_cNB11_INTQUAD,
STAC_HP_DV7_4000,
/* power management */
unsigned int num_pwrs;
- const unsigned int *pwr_mapping;
const hda_nid_t *pwr_nids;
const hda_nid_t *dac_list;
#define STAC92HD83_DAC_COUNT 3
-static const hda_nid_t stac92hd83xxx_pwr_nids[4] = {
- 0xa, 0xb, 0xd, 0xe,
+static const hda_nid_t stac92hd83xxx_pwr_nids[7] = {
+ 0x0a, 0x0b, 0x0c, 0xd, 0x0e,
+ 0x0f, 0x10
};
static const hda_nid_t stac92hd83xxx_slave_dig_outs[2] = {
0x1e, 0,
};
-static const unsigned int stac92hd83xxx_pwr_mapping[4] = {
- 0x03, 0x0c, 0x20, 0x40,
-};
-
static const hda_nid_t stac92hd83xxx_dmic_nids[] = {
0x11, 0x20,
};
0x40f000f0, 0x40f000f0,
};
+static const unsigned int dell_vostro_3500_pin_configs[10] = {
+ 0x02a11020, 0x0221101f, 0x400000f0, 0x90170110,
+ 0x400000f1, 0x400000f2, 0x400000f3, 0x90a60160,
+ 0x400000f4, 0x400000f5,
+};
+
static const unsigned int hp_dv7_4000_pin_configs[10] = {
0x03a12050, 0x0321201f, 0x40f000f0, 0x90170110,
0x40f000f0, 0x40f000f0, 0x90170110, 0xd5a30140,
[STAC_92HD83XXX_REF] = ref92hd83xxx_pin_configs,
[STAC_92HD83XXX_PWR_REF] = ref92hd83xxx_pin_configs,
[STAC_DELL_S14] = dell_s14_pin_configs,
+ [STAC_DELL_VOSTRO_3500] = dell_vostro_3500_pin_configs,
[STAC_92HD83XXX_HP_cNB11_INTQUAD] = hp_cNB11_intquad_pin_configs,
[STAC_HP_DV7_4000] = hp_dv7_4000_pin_configs,
};
[STAC_92HD83XXX_REF] = "ref",
[STAC_92HD83XXX_PWR_REF] = "mic-ref",
[STAC_DELL_S14] = "dell-s14",
+ [STAC_DELL_VOSTRO_3500] = "dell-vostro-3500",
[STAC_92HD83XXX_HP] = "hp",
[STAC_92HD83XXX_HP_cNB11_INTQUAD] = "hp_cNB11_intquad",
[STAC_HP_DV7_4000] = "hp-dv7-4000",
"DFI LanParty", STAC_92HD83XXX_REF),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02ba,
"unknown Dell", STAC_DELL_S14),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x1028,
+ "Dell Vostro 3500", STAC_DELL_VOSTRO_3500),
SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xff00, 0x3600,
"HP", STAC_92HD83XXX_HP),
SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x1656,
stac_toggle_power_map(codec, nid, 1);
continue;
}
- if (enable_pin_detect(codec, nid, STAC_PWR_EVENT))
+ if (enable_pin_detect(codec, nid, STAC_PWR_EVENT)) {
stac_issue_unsol_event(codec, nid);
+ continue;
+ }
+ /* none of the above, turn the port OFF */
+ stac_toggle_power_map(codec, nid, 0);
}
/* sync mute LED */
if (idx >= spec->num_pwrs)
return;
- /* several codecs have two power down bits */
- if (spec->pwr_mapping)
- idx = spec->pwr_mapping[idx];
- else
- idx = 1 << idx;
+ idx = 1 << idx;
val = snd_hda_codec_read(codec, codec->afg, 0, 0x0fec, 0x0) & 0xff;
if (enable)
snd_hda_codec_set_pincfg(codec, 0xf, 0x2181205e);
}
- /* reset pin power-down; Windows may leave these bits after reboot */
- snd_hda_codec_write_cache(codec, codec->afg, 0, 0x7EC, 0);
- snd_hda_codec_write_cache(codec, codec->afg, 0, 0x7ED, 0);
codec->no_trigger_sense = 1;
codec->spec = spec;
codec->slave_dig_outs = stac92hd83xxx_slave_dig_outs;
spec->digbeep_nid = 0x21;
spec->pwr_nids = stac92hd83xxx_pwr_nids;
- spec->pwr_mapping = stac92hd83xxx_pwr_mapping;
spec->num_pwrs = ARRAY_SIZE(stac92hd83xxx_pwr_nids);
spec->multiout.dac_nids = spec->dac_nids;
spec->init = stac92hd83xxx_core_init;
stac92xx_set_config_regs(codec,
stac92hd83xxx_brd_tbl[spec->board_config]);
- if (spec->board_config != STAC_92HD83XXX_PWR_REF)
- spec->num_pwrs = 0;
-
codec->patch_ops = stac92xx_patch_ops;
if (find_mute_led_gpio(codec, 0))
(codec->revision_id & 0xf) == 1)
spec->stream_delay = 40; /* 40 milliseconds */
- /* no output amps */
- spec->num_pwrs = 0;
/* disable VSW */
spec->init = stac92hd71bxx_core_init;
unmute_init++;
if ((codec->revision_id & 0xf) == 1)
spec->stream_delay = 40; /* 40 milliseconds */
- /* no output amps */
- spec->num_pwrs = 0;
/* fallthru */
default:
spec->init = stac92hd71bxx_core_init;
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/asoundef.h>
#include "hda_codec.h"
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/init.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/initval.h>
#include "ice1712.h"
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/mutex.h>
#include <sound/core.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/mutex.h>
#include <sound/core.h>
#include <sound/info.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/ac97_codec.h>
}
if (civ != igetbyte(chip, ichdev->reg_offset + ICH_REG_OFF_CIV))
continue;
+
+ /* IO read operation is very expensive inside virtual machine
+ * as it is emulated. The probability that subsequent PICB read
+ * will return different result is high enough to loop till
+ * timeout here.
+ * Same CIV is strict enough condition to be sure that PICB
+ * is valid inside VM on emulated card. */
if (chip->inside_vm)
break;
if (ptr1 == igetword(chip, ichdev->reg_offset + ichdev->roff_picb))
ICH_PCR, ICH_SCR, ICH_SIS_TCR
};
+static int __devinit snd_intel8x0_inside_vm(struct pci_dev *pci)
+{
+ int result = inside_vm;
+ char *msg = NULL;
+
+ /* check module parameter first (override detection) */
+ if (result >= 0) {
+ msg = result ? "enable (forced) VM" : "disable (forced) VM";
+ goto fini;
+ }
+
+ /* detect KVM and Parallels virtual environments */
+ result = kvm_para_available();
+#ifdef X86_FEATURE_HYPERVISOR
+ result = result || boot_cpu_has(X86_FEATURE_HYPERVISOR);
+#endif
+ if (!result)
+ goto fini;
+
+ /* check for known (emulated) devices */
+ if (pci->subsystem_vendor == 0x1af4 &&
+ pci->subsystem_device == 0x1100) {
+ /* KVM emulated sound, PCI SSID: 1af4:1100 */
+ msg = "enable KVM";
+ } else if (pci->subsystem_vendor == 0x1ab8) {
+ /* Parallels VM emulated sound, PCI SSID: 1ab8:xxxx */
+ msg = "enable Parallels VM";
+ } else {
+ msg = "disable (unknown or VT-d) VM";
+ result = 0;
+ }
+
+fini:
+ if (msg != NULL)
+ printk(KERN_INFO "intel8x0: %s optimization\n", msg);
+
+ return result;
+}
+
static int __devinit snd_intel8x0_create(struct snd_card *card,
struct pci_dev *pci,
unsigned long device_type,
if (xbox)
chip->xbox = 1;
- chip->inside_vm = inside_vm;
- if (inside_vm)
- printk(KERN_INFO "intel8x0: enable KVM optimization\n");
+ chip->inside_vm = snd_intel8x0_inside_vm(pci);
if (pci->vendor == PCI_VENDOR_ID_INTEL &&
pci->device == PCI_DEVICE_ID_INTEL_440MX)
buggy_irq = 0;
}
- if (inside_vm < 0) {
- /* detect KVM and Parallels virtual environments */
- inside_vm = kvm_para_available();
-#if defined(__i386__) || defined(__x86_64__)
- inside_vm = inside_vm || boot_cpu_has(X86_FEATURE_HYPERVISOR);
-#endif
- }
-
if ((err = snd_intel8x0_create(card, pci, pci_id->driver_data,
&chip)) < 0) {
snd_card_free(card);
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/ac97_codec.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/wait.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/firmware.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/firmware.h>
#include <linux/input.h>
#include <sound/core.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/firmware.h>
#include <linux/vmalloc.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <asm/io.h>
#include <sound/core.h>
#include "mixart.h"
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/mutex.h>
#include <sound/core.h>
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/pci.h>
+#include <linux/module.h>
#include <sound/ac97_codec.h>
#include <sound/control.h>
#include <sound/core.h>
#include <linux/delay.h>
#include <linux/sched.h>
+#include <linux/export.h>
#include <sound/core.h>
#include <sound/mpu401.h>
#include <asm/io.h>
#include <linux/mutex.h>
#include <linux/pci.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <sound/ac97_codec.h>
#include <sound/asoundef.h>
#include <sound/core.h>
#include <linux/pci.h>
#include <linux/delay.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <sound/pcm.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/mutex.h>
#include <sound/core.h>
#include <linux/vmalloc.h>
#include <linux/firmware.h>
#include <linux/pci.h>
+#include <linux/module.h>
#include <asm/io.h>
#include <sound/core.h>
#include <sound/hwdep.h>
#include <linux/device.h>
#include <linux/firmware.h>
#include <linux/kernel.h>
+#include <linux/module.h>
#include <asm/io.h>
#include <sound/core.h>
#include <sound/info.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/info.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/info.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/firmware.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/math64.h>
#include <sound/core.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/math64.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/control.h>
#include <linux/pci.h>
#include <linux/time.h>
#include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <sound/core.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/gameport.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/time.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/trident.h>
#include <sound/initval.h>
#include <linux/vmalloc.h>
#include <linux/gameport.h>
#include <linux/dma-mapping.h>
+#include <linux/export.h>
#include <sound/core.h>
#include <sound/info.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/gameport.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <sound/tlv.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/time.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/ymfpci.h>
#include <sound/mpu401.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/mutex.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/control.h>
#include <sound/core.h>
#include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <pcmcia/ciscode.h>
#include <pcmcia/cisreg.h>
#include "pdaudiocf.h"
#include <linux/init.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/slab.h>
#include <sound/core.h>
#include "vxpocket.h"
#include <linux/init.h>
#include <linux/err.h>
#include <linux/platform_device.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/initval.h>
#include "pmac.h"
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/module.h>
#include <sound/asound.h>
#include <sound/control.h>
(0x0fUL << 12) |
(PS3_AUDIO_IOID);
- ret = lv1_gpu_attribute(0x100, 0x007, val, 0, 0);
+ ret = lv1_gpu_attribute(0x100, 0x007, val);
if (ret)
pr_info("%s: gpu_attribute failed %d\n", __func__,
ret);
#include <linux/slab.h>
#include <linux/time.h>
#include <linux/wait.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/firmware.h>
#include <linux/timer.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <sound/pcm.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <linux/bug.h>
+#include <linux/module.h>
#include <asm/portmux.h>
#include <asm/dma.h>
#include <asm/blackfin.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/device.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/ac97_codec.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/device.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/initval.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <sound/soc.h>
#include <sound/initval.h>
#include <sound/tlv.h>
#include <linux/tty.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <linux/device.h>
#include <linux/gpio.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/initval.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <asm/intel_scu_ipc.h>
#include <sound/pcm.h>
#include <linux/mfd/wl1273-core.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
static int wm8994_readable(struct snd_soc_codec *codec, unsigned int reg)
{
struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
- struct wm8994 *control = wm8994->control_data;
+ struct wm8994 *control = codec->control_data;
switch (reg) {
case WM8994_GPIO_1:
{
struct wm8994_priv *wm8994 = data;
struct snd_soc_codec *codec = wm8994->codec;
- int reg;
+ int reg, count;
- reg = snd_soc_read(codec, WM8958_MIC_DETECT_3);
- if (reg < 0) {
- dev_err(codec->dev, "Failed to read mic detect status: %d\n",
- reg);
- return IRQ_NONE;
- }
+ /* We may occasionally read a detection without an impedence
+ * range being provided - if that happens loop again.
+ */
+ count = 10;
+ do {
+ reg = snd_soc_read(codec, WM8958_MIC_DETECT_3);
+ if (reg < 0) {
+ dev_err(codec->dev,
+ "Failed to read mic detect status: %d\n",
+ reg);
+ return IRQ_NONE;
+ }
- if (!(reg & WM8958_MICD_VALID)) {
- dev_dbg(codec->dev, "Mic detect data not valid\n");
- goto out;
- }
+ if (!(reg & WM8958_MICD_VALID)) {
+ dev_dbg(codec->dev, "Mic detect data not valid\n");
+ goto out;
+ }
+
+ if (!(reg & WM8958_MICD_STS) || (reg & WM8958_MICD_LVL_MASK))
+ break;
+
+ msleep(1);
+ } while (count--);
+
+ if (count == 0)
+ dev_warn(codec->dev, "No impedence range reported for jack\n");
#ifndef CONFIG_SND_SOC_WM8994_MODULE
trace_snd_soc_jack_irq(dev_name(codec->dev));
wm8994_request_irq(codec->control_data, WM8994_IRQ_FIFOS_ERR,
wm8994_fifo_error, "FIFO error", codec);
- wm8994_request_irq(wm8994->control_data, WM8994_IRQ_TEMP_WARN,
+ wm8994_request_irq(codec->control_data, WM8994_IRQ_TEMP_WARN,
wm8994_temp_warn, "Thermal warning", codec);
- wm8994_request_irq(wm8994->control_data, WM8994_IRQ_TEMP_SHUT,
+ wm8994_request_irq(codec->control_data, WM8994_IRQ_TEMP_SHUT,
wm8994_temp_shut, "Thermal shutdown", codec);
ret = wm8994_request_irq(codec->control_data, WM8994_IRQ_DCS_DONE,
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
*/
#include <linux/platform_device.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/jack.h>
#include <sound/pcm.h>
#include <linux/device.h>
#include <linux/slab.h>
#include <linux/io.h>
+#include <linux/module.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <linux/slab.h>
#include <linux/io.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <linux/gpio.h>
#include <linux/spinlock.h>
#include <linux/tty.h>
+#include <linux/module.h>
#include <sound/soc.h>
#include <sound/jack.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <linux/gpio.h>
+#include <linux/module.h>
#include <plat/mcbsp.h>
#include "omap-mcbsp.h"
#include <linux/dma-mapping.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/regulator/consumer.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/pcm.h>
*
*/
+#include <linux/module.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <asm/mach-types.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <linux/gpio.h>
+#include <linux/module.h>
#include <plat/mcbsp.h>
#include "omap-mcbsp.h"
#include <linux/clk.h>
#include <linux/platform_device.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/jack.h>
#include <sound/pcm.h>
/* Register descriptions for twl4030 codec part */
#include <linux/mfd/twl4030-audio.h>
+#include <linux/module.h>
#include "omap-mcbsp.h"
#include "omap-pcm.h"
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/mfd/twl6040.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/pcm.h>
/* Register descriptions for twl4030 codec part */
#include <linux/mfd/twl4030-audio.h>
+#include <linux/module.h>
#include "omap-mcbsp.h"
#include "omap-pcm.h"
*/
#include <linux/dma-mapping.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/soc.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/clk.h>
+#include <linux/module.h>
#include <sound/soc.h>
#include <linux/slab.h>
#include <linux/dma-mapping.h>
+#include <linux/module.h>
#include <sound/soc.h>
#include <sound/pcm_params.h>
pr_debug("Entered %s\n", __func__);
- /* TODO - do we need to ensure DMA flushed */
snd_pcm_set_runtime_buffer(substream, NULL);
if (prtd->params) {
+ prtd->params->ops->flush(prtd->params->ch);
prtd->params->ops->release(prtd->params->ch,
prtd->params->client);
prtd->params = NULL;
*
*/
+#include <linux/module.h>
#include <sound/soc.h>
#include <sound/jack.h>
#include <linux/types.h>
#include <linux/gpio.h>
+#include <linux/module.h>
#include <sound/soc.h>
#include <sound/jack.h>
#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/module.h>
#include <sound/soc.h>
#include <sound/pcm_params.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
* published by the Free Software Foundation.
*/
+#include <linux/module.h>
#include <sound/soc.h>
#include <asm/mach-types.h>
*
*/
+#include <linux/module.h>
#include <sound/soc.h>
static struct snd_soc_card ln2440sbc;
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/module.h>
#include <sound/soc.h>
#include <sound/pcm_params.h>
#include <linux/types.h>
#include <linux/gpio.h>
+#include <linux/module.h>
#include <sound/soc.h>
#include <sound/jack.h>
#include <linux/gpio.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/module.h>
#include <sound/soc.h>
#include <sound/pcm_params.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/module.h>
#include <sound/soc.h>
#include <sound/pcm_params.h>
#include <linux/gpio.h>
#include <linux/clk.h>
+#include <linux/module.h>
#include <sound/soc.h>
* published by the Free Software Foundation.
*/
+#include <linux/module.h>
#include <sound/soc.h>
#include "s3c24xx_simtec.h"
* published by the Free Software Foundation.
*/
+#include <linux/module.h>
#include <sound/soc.h>
#include "s3c24xx_simtec.h"
#include <linux/clk.h>
#include <linux/gpio.h>
+#include <linux/module.h>
#include <sound/soc.h>
#include <sound/s3c24xx_uda134x.h>
*/
#include <linux/gpio.h>
+#include <linux/module.h>
#include <sound/soc.h>
#include <sound/jack.h>
*/
#include <linux/clk.h>
+#include <linux/module.h>
#include <sound/soc.h>
* option) any later version.
*/
+#include <linux/module.h>
#include <sound/soc.h>
#include <sound/pcm_params.h>
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
+#include <linux/module.h>
#include <sound/soc.h>
#include <sound/pcm_params.h>
#include <sound/pcm.h>
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
+#include <linux/module.h>
#include <sound/soc.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
*
*/
+#include <linux/module.h>
#include <sound/soc.h>
static struct snd_soc_card smdk;
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/module.h>
#include <sound/soc.h>
#include <sound/pcm_params.h>
#include <sound/soc-dapm.h>
#include <sound/jack.h>
#include <linux/gpio.h>
+#include <linux/module.h>
#include "../codecs/wm8996.h"
#include "../codecs/wm9081.h"
#include <sound/soc-dapm.h>
#include <sound/jack.h>
#include <linux/gpio.h>
+#include <linux/module.h>
#include "../codecs/wm8962.h"
*/
#include <linux/platform_device.h>
+#include <linux/module.h>
#include <sound/sh_fsi.h>
struct fsi_ak4642_data {
*/
#include <linux/platform_device.h>
+#include <linux/module.h>
#include <sound/sh_fsi.h>
static int fsi_da7210_init(struct snd_soc_pcm_runtime *rtd)
*/
#include <linux/platform_device.h>
+#include <linux/module.h>
#include <sound/sh_fsi.h>
struct fsi_hdmi_data {
#include <linux/pm_runtime.h>
#include <linux/io.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <sound/soc.h>
#include <sound/sh_fsi.h>
#include <linux/firmware.h>
#include <linux/pm_runtime.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <asm/clock.h>
#include <asm/siu.h>
#include <linux/lzo.h>
#include <linux/bitmap.h>
#include <linux/rbtree.h>
+#include <linux/export.h>
#include <trace/events/asoc.h>
#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/regmap.h>
+#include <linux/export.h>
#include <sound/soc.h>
#include <trace/events/asoc.h>
#include <linux/interrupt.h>
#include <linux/workqueue.h>
#include <linux/delay.h>
+#include <linux/export.h>
#include <trace/events/asoc.h>
/**
*/
#include <linux/platform_device.h>
+#include <linux/export.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/kernel.h>
+#include <linux/module.h>
#include "tegra_asoc_utils.h"
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/atomic.h>
+#include <linux/module.h>
MODULE_AUTHOR("Rudolf Koenig, Brent Baccala and Martin Habets");
MODULE_DESCRIPTION("Sun DBRI");
#include <sound/core.h>
#include <sound/emux_synth.h>
#include <linux/init.h>
+#include <linux/module.h>
#include "emux_voice.h"
MODULE_AUTHOR("Takashi Iwai");
#ifdef CONFIG_SND_SEQUENCER_OSS
+#include <linux/export.h>
#include <asm/uaccess.h>
#include <sound/core.h>
#include "emux_voice.h"
#include "emux_voice.h"
#include <linux/slab.h>
-
+#include <linux/module.h>
/* Prototypes for static functions */
static void free_port(void *private);
*
*/
+#include <linux/export.h>
#include "emux_voice.h"
#include <sound/asoundef.h>
*/
#include <asm/uaccess.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <sound/core.h>
#include <sound/soundfont.h>
#include <sound/seq_oss_legacy.h>
#include <linux/mutex.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/util_mem.h>
*/
#include <linux/firmware.h>
+#include <linux/module.h>
#include <linux/bitrev.h>
#include <linux/kernel.h>
#include <linux/mutex.h>
#include <linux/usb/audio.h>
#include <linux/usb/audio-v2.h>
+#include <linux/module.h>
#include <sound/control.h>
#include <sound/core.h>
#include <linux/usb.h>
#include <linux/wait.h>
#include <linux/usb/audio.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/control.h>
unsigned int i;
for (i = 0; i < stream->queue_length; ++i)
- usb_kill_urb(&stream->urbs[i]->urb);
+ if (stream->urbs[i])
+ usb_kill_urb(&stream->urbs[i]->urb);
}
static int enable_iso_interface(struct ua101 *ua, unsigned int intf_index)
{
struct usb_host_interface *alts;
+ if (!ua->intf[intf_index])
+ return;
+
alts = ua->intf[intf_index]->cur_altsetting;
if (alts->desc.bAlternateSetting != 0) {
int err = usb_set_interface(ua->dev,
{
unsigned int i;
- for (i = 0; i < stream->queue_length; ++i)
+ for (i = 0; i < stream->queue_length; ++i) {
kfree(stream->urbs[i]);
+ stream->urbs[i] = NULL;
+ }
}
static void free_usb_related_resources(struct ua101 *ua,
struct usb_interface *interface)
{
unsigned int i;
+ struct usb_interface *intf;
+ mutex_lock(&ua->mutex);
free_stream_urbs(&ua->capture);
free_stream_urbs(&ua->playback);
+ mutex_unlock(&ua->mutex);
free_stream_buffers(ua, &ua->capture);
free_stream_buffers(ua, &ua->playback);
- for (i = 0; i < ARRAY_SIZE(ua->intf); ++i)
- if (ua->intf[i]) {
- usb_set_intfdata(ua->intf[i], NULL);
- if (ua->intf[i] != interface)
+ for (i = 0; i < ARRAY_SIZE(ua->intf); ++i) {
+ mutex_lock(&ua->mutex);
+ intf = ua->intf[i];
+ ua->intf[i] = NULL;
+ mutex_unlock(&ua->mutex);
+ if (intf) {
+ usb_set_intfdata(intf, NULL);
+ if (intf != interface)
usb_driver_release_interface(&ua101_driver,
- ua->intf[i]);
+ intf);
}
+ }
}
static void ua101_card_free(struct snd_card *card)
* interface to ALSA control for feature/mixer units
*/
+/* volume control quirks */
+static void volume_control_quirks(struct usb_mixer_elem_info *cval,
+ struct snd_kcontrol *kctl)
+{
+ switch (cval->mixer->chip->usb_id) {
+ case USB_ID(0x0471, 0x0101):
+ case USB_ID(0x0471, 0x0104):
+ case USB_ID(0x0471, 0x0105):
+ case USB_ID(0x0672, 0x1041):
+ /* quirk for UDA1321/N101.
+ * note that detection between firmware 2.1.1.7 (N101)
+ * and later 2.1.1.21 is not very clear from datasheets.
+ * I hope that the min value is -15360 for newer firmware --jk
+ */
+ if (!strcmp(kctl->id.name, "PCM Playback Volume") &&
+ cval->min == -15616) {
+ snd_printk(KERN_INFO
+ "set volume quirk for UDA1321/N101 chip\n");
+ cval->max = -256;
+ }
+ break;
+
+ case USB_ID(0x046d, 0x09a4):
+ if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
+ snd_printk(KERN_INFO
+ "set volume quirk for QuickCam E3500\n");
+ cval->min = 6080;
+ cval->max = 8768;
+ cval->res = 192;
+ }
+ break;
+
+ case USB_ID(0x046d, 0x0808):
+ case USB_ID(0x046d, 0x0809):
+ case USB_ID(0x046d, 0x081d): /* HD Webcam c510 */
+ case USB_ID(0x046d, 0x0991):
+ /* Most audio usb devices lie about volume resolution.
+ * Most Logitech webcams have res = 384.
+ * Proboly there is some logitech magic behind this number --fishor
+ */
+ if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
+ snd_printk(KERN_INFO
+ "set resolution quirk: cval->res = 384\n");
+ cval->res = 384;
+ }
+ break;
+
+ }
+}
+
/*
* retrieve the minimum and maximum values for the specified control
*/
-static int get_min_max(struct usb_mixer_elem_info *cval, int default_min)
+static int get_min_max_with_quirks(struct usb_mixer_elem_info *cval,
+ int default_min, struct snd_kcontrol *kctl)
{
/* for failsafe */
cval->min = default_min;
cval->initialized = 1;
}
+ if (kctl)
+ volume_control_quirks(cval, kctl);
+
/* USB descriptions contain the dB scale in 1/256 dB unit
* while ALSA TLV contains in 1/100 dB unit
*/
return 0;
}
+#define get_min_max(cval, def) get_min_max_with_quirks(cval, def, NULL)
/* get a feature/mixer unit info */
static int mixer_ctl_feature_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
uinfo->value.integer.max = 1;
} else {
if (!cval->initialized) {
- get_min_max(cval, 0);
+ get_min_max_with_quirks(cval, 0, kcontrol);
if (cval->initialized && cval->dBmin >= cval->dBmax) {
kcontrol->vd[0].access &=
~(SNDRV_CTL_ELEM_ACCESS_TLV_READ |
cval->ch_readonly = readonly_mask;
}
- /* get min/max values */
- get_min_max(cval, 0);
-
/* if all channels in the mask are marked read-only, make the control
* read-only. set_cur_mix_value() will check the mask again and won't
* issue write commands to read-only channels. */
len = snd_usb_copy_string_desc(state, nameid,
kctl->id.name, sizeof(kctl->id.name));
+ /* get min/max values */
+ get_min_max_with_quirks(cval, 0, kctl);
+
switch (control) {
case UAC_FU_MUTE:
case UAC_FU_VOLUME:
break;
}
- /* volume control quirks */
- switch (state->chip->usb_id) {
- case USB_ID(0x0471, 0x0101):
- case USB_ID(0x0471, 0x0104):
- case USB_ID(0x0471, 0x0105):
- case USB_ID(0x0672, 0x1041):
- /* quirk for UDA1321/N101.
- * note that detection between firmware 2.1.1.7 (N101)
- * and later 2.1.1.21 is not very clear from datasheets.
- * I hope that the min value is -15360 for newer firmware --jk
- */
- if (!strcmp(kctl->id.name, "PCM Playback Volume") &&
- cval->min == -15616) {
- snd_printk(KERN_INFO
- "set volume quirk for UDA1321/N101 chip\n");
- cval->max = -256;
- }
- break;
-
- case USB_ID(0x046d, 0x09a4):
- if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
- snd_printk(KERN_INFO
- "set volume quirk for QuickCam E3500\n");
- cval->min = 6080;
- cval->max = 8768;
- cval->res = 192;
- }
- break;
-
- case USB_ID(0x046d, 0x0808):
- case USB_ID(0x046d, 0x0809):
- case USB_ID(0x046d, 0x0991):
- /* Most audio usb devices lie about volume resolution.
- * Most Logitech webcams have res = 384.
- * Proboly there is some logitech magic behind this number --fishor
- */
- if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
- snd_printk(KERN_INFO
- "set resolution quirk: cval->res = 384\n");
- cval->res = 384;
- }
- break;
-
- }
-
range = (cval->max - cval->min) / cval->res;
/* Are there devices with volume range more than 255? I use a bit more
* to be sure. 384 is a resolution magic number found on Logitech
return -ENOMEM;
}
if (fp->nr_rates > 0) {
- rate_table = kmalloc(sizeof(int) * fp->nr_rates, GFP_KERNEL);
+ rate_table = kmemdup(fp->rate_table,
+ sizeof(int) * fp->nr_rates, GFP_KERNEL);
if (!rate_table) {
kfree(fp);
return -ENOMEM;
}
- memcpy(rate_table, fp->rate_table, sizeof(int) * fp->nr_rates);
fp->rate_table = rate_table;
}
if (altsd->bNumEndpoints != 1)
return -ENXIO;
- fp = kmalloc(sizeof(*fp), GFP_KERNEL);
+ fp = kmemdup(&ua_format, sizeof(*fp), GFP_KERNEL);
if (!fp)
return -ENOMEM;
- memcpy(fp, &ua_format, sizeof(*fp));
fp->iface = altsd->bInterfaceNumber;
fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress;
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/usb/audio.h>
+#include <linux/module.h>
#include <sound/core.h>
#include <sound/hwdep.h>
#include <sound/pcm.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/usb.h>
+#include <linux/moduleparam.h>
#include <sound/core.h>
#include <sound/info.h>
#include <sound/pcm.h>
static void open_counters(struct perf_evlist *evlist)
{
- struct perf_evsel *pos;
+ struct perf_evsel *pos, *first;
if (evlist->cpus->map[0] < 0)
no_inherit = true;
+ first = list_entry(evlist->entries.next, struct perf_evsel, node);
+
list_for_each_entry(pos, &evlist->entries, node) {
struct perf_event_attr *attr = &pos->attr;
+ struct xyarray *group_fd = NULL;
/*
* Check if parse_single_tracepoint_event has already asked for
* PERF_SAMPLE_TIME.
*/
bool time_needed = attr->sample_type & PERF_SAMPLE_TIME;
+ if (group && pos != first)
+ group_fd = first->fd;
+
config_attr(pos, evlist);
retry_sample_id:
attr->sample_id_all = sample_id_all_avail ? 1 : 0;
try_again:
- if (perf_evsel__open(pos, evlist->cpus, evlist->threads, group) < 0) {
+ if (perf_evsel__open(pos, evlist->cpus, evlist->threads, group,
+ group_fd) < 0) {
int err = errno;
if (err == EPERM || err == EACCES) {
- ui__warning_paranoid();
+ ui__error_paranoid();
exit(EXIT_FAILURE);
} else if (err == ENODEV && cpu_list) {
die("No such device - did you specify"
struct stats runtime_dtlb_cache_stats[MAX_NR_CPUS];
struct stats walltime_nsecs_stats;
-static int create_perf_stat_counter(struct perf_evsel *evsel)
+static int create_perf_stat_counter(struct perf_evsel *evsel,
+ struct perf_evsel *first)
{
struct perf_event_attr *attr = &evsel->attr;
+ struct xyarray *group_fd = NULL;
+
+ if (group && evsel != first)
+ group_fd = first->fd;
if (scale)
attr->read_format = PERF_FORMAT_TOTAL_TIME_ENABLED |
attr->inherit = !no_inherit;
if (system_wide)
- return perf_evsel__open_per_cpu(evsel, evsel_list->cpus, group);
-
+ return perf_evsel__open_per_cpu(evsel, evsel_list->cpus,
+ group, group_fd);
if (target_pid == -1 && target_tid == -1) {
attr->disabled = 1;
attr->enable_on_exec = 1;
}
- return perf_evsel__open_per_thread(evsel, evsel_list->threads, group);
+ return perf_evsel__open_per_thread(evsel, evsel_list->threads,
+ group, group_fd);
}
/*
static int run_perf_stat(int argc __used, const char **argv)
{
unsigned long long t0, t1;
- struct perf_evsel *counter;
+ struct perf_evsel *counter, *first;
int status = 0;
int child_ready_pipe[2], go_pipe[2];
const bool forks = (argc > 0);
close(child_ready_pipe[0]);
}
+ first = list_entry(evsel_list->entries.next, struct perf_evsel, node);
+
list_for_each_entry(counter, &evsel_list->entries, node) {
- if (create_perf_stat_counter(counter) < 0) {
+ if (create_perf_stat_counter(counter, first) < 0) {
if (errno == EINVAL || errno == ENOSYS || errno == ENOENT) {
if (verbose)
ui__warning("%s event is not supported by the kernel.\n",
goto out_thread_map_delete;
}
- if (perf_evsel__open_per_thread(evsel, threads, false) < 0) {
+ if (perf_evsel__open_per_thread(evsel, threads, false, NULL) < 0) {
pr_debug("failed to open counter: %s, "
"tweak /proc/sys/kernel/perf_event_paranoid?\n",
strerror(errno));
goto out_thread_map_delete;
}
- if (perf_evsel__open(evsel, cpus, threads, false) < 0) {
+ if (perf_evsel__open(evsel, cpus, threads, false, NULL) < 0) {
pr_debug("failed to open counter: %s, "
"tweak /proc/sys/kernel/perf_event_paranoid?\n",
strerror(errno));
perf_evlist__add(evlist, evsels[i]);
- if (perf_evsel__open(evsels[i], cpus, threads, false) < 0) {
+ if (perf_evsel__open(evsels[i], cpus, threads, false, NULL) < 0) {
pr_debug("failed to open counter: %s, "
"tweak /proc/sys/kernel/perf_event_paranoid?\n",
strerror(errno));
static bool inherit = false;
static int realtime_prio = 0;
static bool group = false;
+static bool sample_id_all_avail = true;
static unsigned int mmap_pages = 128;
static bool dump_symtab = false;
struct symbol *sym;
if (he == NULL || he->ms.sym == NULL ||
- (he != top.sym_filter_entry && use_browser != 1))
+ ((top.sym_filter_entry == NULL ||
+ top.sym_filter_entry->ms.sym != he->ms.sym) && use_browser != 1))
return;
sym = he->ms.sym;
printf("%-*.*s\n", win_width, win_width, graph_dotted_line);
- if (top.total_lost_warned != top.session->hists.stats.total_lost) {
- top.total_lost_warned = top.session->hists.stats.total_lost;
- color_fprintf(stdout, PERF_COLOR_RED, "WARNING:");
- printf(" LOST %" PRIu64 " events, Check IO/CPU overload\n",
- top.total_lost_warned);
+ if (top.sym_evsel->hists.stats.nr_lost_warned !=
+ top.sym_evsel->hists.stats.nr_events[PERF_RECORD_LOST]) {
+ top.sym_evsel->hists.stats.nr_lost_warned =
+ top.sym_evsel->hists.stats.nr_events[PERF_RECORD_LOST];
+ color_fprintf(stdout, PERF_COLOR_RED,
+ "WARNING: LOST %d chunks, Check IO/CPU overload",
+ top.sym_evsel->hists.stats.nr_lost_warned);
++printed;
}
hists__decay_entries_threaded(&t->sym_evsel->hists,
top.hide_user_symbols,
top.hide_kernel_symbols);
- hists__output_recalc_col_len(&t->sym_evsel->hists, winsize.ws_row - 3);
}
static void *display_thread_tui(void *arg __used)
}
static void perf_event__process_sample(const union perf_event *event,
+ struct perf_evsel *evsel,
struct perf_sample *sample,
struct perf_session *session)
{
}
if (al.sym == NULL || !al.sym->ignore) {
- struct perf_evsel *evsel;
struct hist_entry *he;
- evsel = perf_evlist__id2evsel(top.evlist, sample->id);
- assert(evsel != NULL);
-
if ((sort__has_parent || symbol_conf.use_callchain) &&
sample->callchain) {
err = perf_session__resolve_callchain(session, al.thread,
static void perf_session__mmap_read_idx(struct perf_session *self, int idx)
{
struct perf_sample sample;
+ struct perf_evsel *evsel;
union perf_event *event;
int ret;
continue;
}
+ evsel = perf_evlist__id2evsel(self->evlist, sample.id);
+ assert(evsel != NULL);
+
if (event->header.type == PERF_RECORD_SAMPLE)
- perf_event__process_sample(event, &sample, self);
- else
+ perf_event__process_sample(event, evsel, &sample, self);
+ else if (event->header.type < PERF_RECORD_MAX) {
+ hists__inc_nr_events(&evsel->hists, event->header.type);
perf_event__process(event, &sample, self);
+ } else
+ ++self->hists.stats.nr_unknown_events;
}
}
static void start_counters(struct perf_evlist *evlist)
{
- struct perf_evsel *counter;
+ struct perf_evsel *counter, *first;
+
+ first = list_entry(evlist->entries.next, struct perf_evsel, node);
list_for_each_entry(counter, &evlist->entries, node) {
struct perf_event_attr *attr = &counter->attr;
+ struct xyarray *group_fd = NULL;
+
+ if (group && counter != first)
+ group_fd = first->fd;
attr->sample_type = PERF_SAMPLE_IP | PERF_SAMPLE_TID;
attr->mmap = 1;
attr->comm = 1;
attr->inherit = inherit;
+retry_sample_id:
+ attr->sample_id_all = sample_id_all_avail ? 1 : 0;
try_again:
if (perf_evsel__open(counter, top.evlist->cpus,
- top.evlist->threads, group) < 0) {
+ top.evlist->threads, group,
+ group_fd) < 0) {
int err = errno;
if (err == EPERM || err == EACCES) {
- ui__warning_paranoid();
+ ui__error_paranoid();
goto out_err;
+ } else if (err == EINVAL && sample_id_all_avail) {
+ /*
+ * Old kernel, no attr->sample_id_type_all field
+ */
+ sample_id_all_avail = false;
+ goto retry_sample_id;
}
/*
* If it's cycles then fall back to hrtimer
}
err = -ENOENT;
dso->annotate_warned = 1;
- pr_err("Can't annotate %s: No vmlinux file%s was found in the "
- "path.\nPlease use 'perf buildid-cache -av vmlinux' or "
- "--vmlinux vmlinux.\n",
+ pr_err("Can't annotate %s:\n\n"
+ "No vmlinux file%s\nwas found in the path.\n\n"
+ "Please use:\n\n"
+ " perf buildid-cache -av vmlinux\n\n"
+ "or:\n\n"
+ " --vmlinux vmlinux",
sym->name, build_id_msg ?: "");
goto out_free_filename;
}
}
#ifdef NO_NEWT_SUPPORT
-void ui__warning(const char *format, ...)
+int ui__warning(const char *format, ...)
{
va_list args;
va_start(args, format);
vfprintf(stderr, format, args);
va_end(args);
+ return 0;
}
#endif
-void ui__warning_paranoid(void)
+int ui__error_paranoid(void)
{
- ui__warning("Permission error - are you root?\n"
+ return ui__error("Permission error - are you root?\n"
"Consider tweaking /proc/sys/kernel/perf_event_paranoid:\n"
" -1 - Not paranoid at all\n"
" 0 - Disallow raw tracepoint access for unpriv\n"
return 0;
}
-static inline struct ui_progress *ui_progress__new(const char *title __used,
- u64 total __used)
-{
- return (struct ui_progress *)1;
-}
-
-static inline void ui_progress__update(struct ui_progress *self __used,
- u64 curr __used) {}
+static inline void ui_progress__update(u64 curr __used, u64 total __used,
+ const char *title __used) {}
-static inline void ui_progress__delete(struct ui_progress *self __used) {}
+#define ui__error(format, arg...) ui__warning(format, ##arg)
#else
extern char ui_helpline__last_msg[];
int ui_helpline__show_help(const char *format, va_list ap);
#include "ui/progress.h"
+int ui__error(const char *format, ...) __attribute__((format(printf, 1, 2)));
#endif
-void ui__warning(const char *format, ...) __attribute__((format(printf, 1, 2)));
-void ui__warning_paranoid(void);
+int ui__warning(const char *format, ...) __attribute__((format(printf, 1, 2)));
+int ui__error_paranoid(void);
#endif /* __PERF_DEBUG_H */
{
evlist->selected = evsel;
}
+
+int perf_evlist__open(struct perf_evlist *evlist, bool group)
+{
+ struct perf_evsel *evsel, *first;
+ int err, ncpus, nthreads;
+
+ first = list_entry(evlist->entries.next, struct perf_evsel, node);
+
+ list_for_each_entry(evsel, &evlist->entries, node) {
+ struct xyarray *group_fd = NULL;
+
+ if (group && evsel != first)
+ group_fd = first->fd;
+
+ err = perf_evsel__open(evsel, evlist->cpus, evlist->threads,
+ group, group_fd);
+ if (err < 0)
+ goto out_err;
+ }
+
+ return 0;
+out_err:
+ ncpus = evlist->cpus ? evlist->cpus->nr : 1;
+ nthreads = evlist->threads ? evlist->threads->nr : 1;
+
+ list_for_each_entry_reverse(evsel, &evlist->entries, node)
+ perf_evsel__close(evsel, ncpus, nthreads);
+
+ return err;
+}
union perf_event *perf_evlist__mmap_read(struct perf_evlist *self, int idx);
+int perf_evlist__open(struct perf_evlist *evlist, bool group);
+
int perf_evlist__alloc_mmap(struct perf_evlist *evlist);
int perf_evlist__mmap(struct perf_evlist *evlist, int pages, bool overwrite);
void perf_evlist__munmap(struct perf_evlist *evlist);
#include "thread_map.h"
#define FD(e, x, y) (*(int *)xyarray__entry(e->fd, x, y))
+#define GROUP_FD(group_fd, cpu) (*(int *)xyarray__entry(group_fd, cpu, 0))
int __perf_evsel__sample_size(u64 sample_type)
{
}
static int __perf_evsel__open(struct perf_evsel *evsel, struct cpu_map *cpus,
- struct thread_map *threads, bool group)
+ struct thread_map *threads, bool group,
+ struct xyarray *group_fds)
{
int cpu, thread;
unsigned long flags = 0;
- int pid = -1;
+ int pid = -1, err;
if (evsel->fd == NULL &&
perf_evsel__alloc_fd(evsel, cpus->nr, threads->nr) < 0)
- return -1;
+ return -ENOMEM;
if (evsel->cgrp) {
flags = PERF_FLAG_PID_CGROUP;
}
for (cpu = 0; cpu < cpus->nr; cpu++) {
- int group_fd = -1;
+ int group_fd = group_fds ? GROUP_FD(group_fds, cpu) : -1;
for (thread = 0; thread < threads->nr; thread++) {
pid,
cpus->map[cpu],
group_fd, flags);
- if (FD(evsel, cpu, thread) < 0)
+ if (FD(evsel, cpu, thread) < 0) {
+ err = -errno;
goto out_close;
+ }
if (group && group_fd == -1)
group_fd = FD(evsel, cpu, thread);
}
thread = threads->nr;
} while (--cpu >= 0);
- return -1;
+ return err;
+}
+
+void perf_evsel__close(struct perf_evsel *evsel, int ncpus, int nthreads)
+{
+ if (evsel->fd == NULL)
+ return;
+
+ perf_evsel__close_fd(evsel, ncpus, nthreads);
+ perf_evsel__free_fd(evsel);
+ evsel->fd = NULL;
}
static struct {
};
int perf_evsel__open(struct perf_evsel *evsel, struct cpu_map *cpus,
- struct thread_map *threads, bool group)
+ struct thread_map *threads, bool group,
+ struct xyarray *group_fd)
{
if (cpus == NULL) {
/* Work around old compiler warnings about strict aliasing */
if (threads == NULL)
threads = &empty_thread_map.map;
- return __perf_evsel__open(evsel, cpus, threads, group);
+ return __perf_evsel__open(evsel, cpus, threads, group, group_fd);
}
int perf_evsel__open_per_cpu(struct perf_evsel *evsel,
- struct cpu_map *cpus, bool group)
+ struct cpu_map *cpus, bool group,
+ struct xyarray *group_fd)
{
- return __perf_evsel__open(evsel, cpus, &empty_thread_map.map, group);
+ return __perf_evsel__open(evsel, cpus, &empty_thread_map.map, group,
+ group_fd);
}
int perf_evsel__open_per_thread(struct perf_evsel *evsel,
- struct thread_map *threads, bool group)
+ struct thread_map *threads, bool group,
+ struct xyarray *group_fd)
{
- return __perf_evsel__open(evsel, &empty_cpu_map.map, threads, group);
+ return __perf_evsel__open(evsel, &empty_cpu_map.map, threads, group,
+ group_fd);
}
static int perf_event__parse_id_sample(const union perf_event *event, u64 type,
void perf_evsel__close_fd(struct perf_evsel *evsel, int ncpus, int nthreads);
int perf_evsel__open_per_cpu(struct perf_evsel *evsel,
- struct cpu_map *cpus, bool group);
+ struct cpu_map *cpus, bool group,
+ struct xyarray *group_fds);
int perf_evsel__open_per_thread(struct perf_evsel *evsel,
- struct thread_map *threads, bool group);
+ struct thread_map *threads, bool group,
+ struct xyarray *group_fds);
int perf_evsel__open(struct perf_evsel *evsel, struct cpu_map *cpus,
- struct thread_map *threads, bool group);
+ struct thread_map *threads, bool group,
+ struct xyarray *group_fds);
+void perf_evsel__close(struct perf_evsel *evsel, int ncpus, int nthreads);
#define perf_evsel__match(evsel, t, c) \
(evsel->attr.type == PERF_TYPE_##t && \
#define _FILE_OFFSET_BITS 64
+#include "util.h"
#include <sys/types.h>
#include <byteswap.h>
#include <unistd.h>
#include "evlist.h"
#include "evsel.h"
-#include "util.h"
#include "header.h"
#include "../perf.h"
#include "trace-event.h"
root = hists__get_rotate_entries_in(hists);
next = rb_first(root);
- hists->stats.total_period = 0;
while (next) {
n = rb_entry(next, struct hist_entry, rb_node_in);
* been set by, say, the hist_browser.
*/
hists__apply_filters(hists, n);
- hists__inc_nr_entries(hists, n);
}
}
}
hists->entries = RB_ROOT;
hists->nr_entries = 0;
+ hists->stats.total_period = 0;
hists__reset_col_len(hists);
while (next) {
u64 total_lost;
u64 total_invalid_chains;
u32 nr_events[PERF_RECORD_HEADER_MAX];
+ u32 nr_lost_warned;
u32 nr_unknown_events;
u32 nr_invalid_chains;
u32 nr_unknown_id;
cpus = ((struct pyrf_cpu_map *)pcpus)->cpus;
evsel->attr.inherit = inherit;
- if (perf_evsel__open(evsel, cpus, threads, group) < 0) {
+ /*
+ * This will group just the fds for this single evsel, to group
+ * multiple events, use evlist.open().
+ */
+ if (perf_evsel__open(evsel, cpus, threads, group, NULL) < 0) {
PyErr_SetFromErrno(PyExc_OSError);
return NULL;
}
return Py_None;
}
+static PyObject *pyrf_evlist__open(struct pyrf_evlist *pevlist,
+ PyObject *args, PyObject *kwargs)
+{
+ struct perf_evlist *evlist = &pevlist->evlist;
+ int group = 0;
+ static char *kwlist[] = { "group", NULL };
+
+ if (!PyArg_ParseTupleAndKeywords(args, kwargs, "|OOii", kwlist, &group))
+ return NULL;
+
+ if (perf_evlist__open(evlist, group) < 0) {
+ PyErr_SetFromErrno(PyExc_OSError);
+ return NULL;
+ }
+
+ Py_INCREF(Py_None);
+ return Py_None;
+}
+
static PyMethodDef pyrf_evlist__methods[] = {
{
.ml_name = "mmap",
.ml_flags = METH_VARARGS | METH_KEYWORDS,
.ml_doc = PyDoc_STR("mmap the file descriptor table.")
},
+ {
+ .ml_name = "open",
+ .ml_meth = (PyCFunction)pyrf_evlist__open,
+ .ml_flags = METH_VARARGS | METH_KEYWORDS,
+ .ml_doc = PyDoc_STR("open the file descriptors.")
+ },
{
.ml_name = "poll",
.ml_meth = (PyCFunction)pyrf_evlist__poll,
struct perf_sample sample;
u64 limit = os->next_flush;
u64 last_ts = os->last_sample ? os->last_sample->timestamp : 0ULL;
+ unsigned idx = 0, progress_next = os->nr_samples / 16;
int ret;
if (!ops->ordered_samples || !limit)
os->last_flush = iter->timestamp;
list_del(&iter->list);
list_add(&iter->list, &os->sample_cache);
+ if (++idx >= progress_next) {
+ progress_next += os->nr_samples / 16;
+ ui_progress__update(idx, os->nr_samples,
+ "Processing time ordered events...");
+ }
}
if (list_empty(head)) {
os->last_sample =
list_entry(head->prev, struct sample_queue, list);
}
+
+ os->nr_samples = 0;
}
/*
u64 timestamp = new->timestamp;
struct list_head *p;
+ ++os->nr_samples;
os->last_sample = new;
if (!sample) {
dump_event(session, event, file_offset, sample);
+ evsel = perf_evlist__id2evsel(session->evlist, sample->id);
+ if (evsel != NULL && event->header.type != PERF_RECORD_SAMPLE) {
+ /*
+ * XXX We're leaving PERF_RECORD_SAMPLE unnacounted here
+ * because the tools right now may apply filters, discarding
+ * some of the samples. For consistency, in the future we
+ * should have something like nr_filtered_samples and remove
+ * the sample->period from total_sample_period, etc, KISS for
+ * now tho.
+ *
+ * Also testing against NULL allows us to handle files without
+ * attr.sample_id_all and/or without PERF_SAMPLE_ID. In the
+ * future probably it'll be a good idea to restrict event
+ * processing via perf_session to files with both set.
+ */
+ hists__inc_nr_events(&evsel->hists, event->header.type);
+ }
+
switch (event->header.type) {
case PERF_RECORD_SAMPLE:
dump_sample(session, event, sample);
- evsel = perf_evlist__id2evsel(session->evlist, sample->id);
if (evsel == NULL) {
++session->hists.stats.nr_unknown_id;
return -1;
const struct perf_event_ops *ops)
{
if (ops->lost == perf_event__process_lost &&
- session->hists.stats.total_lost != 0) {
- ui__warning("Processed %" PRIu64 " events and LOST %" PRIu64
- "!\n\nCheck IO/CPU overload!\n\n",
- session->hists.stats.total_period,
- session->hists.stats.total_lost);
+ session->hists.stats.nr_events[PERF_RECORD_LOST] != 0) {
+ ui__warning("Processed %d events and lost %d chunks!\n\n"
+ "Check IO/CPU overload!\n\n",
+ session->hists.stats.nr_events[0],
+ session->hists.stats.nr_events[PERF_RECORD_LOST]);
}
if (session->hists.stats.nr_unknown_events != 0) {
{
u64 head, page_offset, file_offset, file_pos, progress_next;
int err, mmap_prot, mmap_flags, map_idx = 0;
- struct ui_progress *progress;
size_t page_size, mmap_size;
char *buf, *mmaps[8];
union perf_event *event;
file_size = data_offset + data_size;
progress_next = file_size / 16;
- progress = ui_progress__new("Processing events...", file_size);
- if (progress == NULL)
- return -1;
mmap_size = session->mmap_window;
if (mmap_size > file_size)
if (file_pos >= progress_next) {
progress_next += file_size / 16;
- ui_progress__update(progress, file_pos);
+ ui_progress__update(file_pos, file_size,
+ "Processing events...");
}
if (file_pos < file_size)
session->ordered_samples.next_flush = ULLONG_MAX;
flush_sample_queue(session, ops);
out_err:
- ui_progress__delete(progress);
perf_session__warn_about_errors(session, ops);
perf_session_free_sample_buffers(session);
return err;
struct sample_queue *sample_buffer;
struct sample_queue *last_sample;
int sample_buffer_idx;
+ unsigned int nr_samples;
};
struct perf_session {
u64 kernel_samples, us_samples;
u64 exact_samples;
u64 guest_us_samples, guest_kernel_samples;
- u64 total_lost_warned;
int print_entries, count_filter, delay_secs;
int freq;
pid_t target_pid, target_tid;
int ret = errno;
if (errno)
- perror("trace-cmd");
+ perror("perf");
else
ret = -1;
#include "libslang.h"
#include <newt.h>
#include "ui.h"
+#include "util.h"
#include <linux/compiler.h>
#include <linux/list.h>
#include <linux/rbtree.h>
self->x = 0;
}
+void ui_browser__handle_resize(struct ui_browser *browser)
+{
+ ui__refresh_dimensions(false);
+ ui_browser__show(browser, browser->title, ui_helpline__current);
+ ui_browser__refresh(browser);
+}
+
+int ui_browser__warning(struct ui_browser *browser, int timeout,
+ const char *format, ...)
+{
+ va_list args;
+ char *text;
+ int key = 0, err;
+
+ va_start(args, format);
+ err = vasprintf(&text, format, args);
+ va_end(args);
+
+ if (err < 0) {
+ va_start(args, format);
+ ui_helpline__vpush(format, args);
+ va_end(args);
+ } else {
+ while ((key == ui__question_window("Warning!", text,
+ "Press any key...",
+ timeout)) == K_RESIZE)
+ ui_browser__handle_resize(browser);
+ free(text);
+ }
+
+ return key;
+}
+
+int ui_browser__help_window(struct ui_browser *browser, const char *text)
+{
+ int key;
+
+ while ((key = ui__help_window(text)) == K_RESIZE)
+ ui_browser__handle_resize(browser);
+
+ return key;
+}
+
+bool ui_browser__dialog_yesno(struct ui_browser *browser, const char *text)
+{
+ int key;
+
+ while ((key = ui__dialog_yesno(text)) == K_RESIZE)
+ ui_browser__handle_resize(browser);
+
+ return key == K_ENTER || toupper(key) == 'Y';
+}
+
void ui_browser__reset_index(struct ui_browser *self)
{
self->index = self->top_idx = 0;
(browser->nr_entries - 1));
}
+ SLsmg_set_char_set(1);
+
while (h < height) {
ui_browser__gotorc(browser, row++, col);
- SLsmg_set_char_set(1);
- SLsmg_write_char(h == pct ? SLSMG_DIAMOND_CHAR : SLSMG_BOARD_CHAR);
- SLsmg_set_char_set(0);
+ SLsmg_write_char(h == pct ? SLSMG_DIAMOND_CHAR : SLSMG_CKBRD_CHAR);
++h;
}
+
+ SLsmg_set_char_set(0);
}
static int __ui_browser__refresh(struct ui_browser *browser)
browser->seek(browser, browser->top_idx, SEEK_SET);
}
-static int ui__getch(int delay_secs)
-{
- struct timeval timeout, *ptimeout = delay_secs ? &timeout : NULL;
- fd_set read_set;
- int err, key;
-
- FD_ZERO(&read_set);
- FD_SET(0, &read_set);
-
- if (delay_secs) {
- timeout.tv_sec = delay_secs;
- timeout.tv_usec = 0;
- }
-
- err = select(1, &read_set, NULL, NULL, ptimeout);
-
- if (err == 0)
- return K_TIMER;
-
- if (err == -1) {
- if (errno == EINTR)
- return K_RESIZE;
- return K_ERROR;
- }
-
- key = SLang_getkey();
- if (key != K_ESC)
- return key;
-
- FD_ZERO(&read_set);
- FD_SET(0, &read_set);
- timeout.tv_sec = 0;
- timeout.tv_usec = 20;
- err = select(1, &read_set, NULL, NULL, &timeout);
- if (err == 0)
- return K_ESC;
-
- SLang_ungetkey(key);
- return SLkp_getkey();
-}
-
int ui_browser__run(struct ui_browser *self, int delay_secs)
{
int err, key;
- pthread__unblock_sigwinch();
-
while (1) {
off_t offset;
key = ui__getch(delay_secs);
if (key == K_RESIZE) {
- pthread_mutex_lock(&ui__lock);
- SLtt_get_screen_size();
- SLsmg_reinit_smg();
- pthread_mutex_unlock(&ui__lock);
+ ui__refresh_dimensions(false);
ui_browser__refresh_dimensions(self);
__ui_browser__show_title(self, self->title);
ui_helpline__puts(self->helpline);
return -1;
}
+void ui_browser__argv_seek(struct ui_browser *browser, off_t offset, int whence)
+{
+ switch (whence) {
+ case SEEK_SET:
+ browser->top = browser->entries;
+ break;
+ case SEEK_CUR:
+ browser->top = browser->top + browser->top_idx + offset;
+ break;
+ case SEEK_END:
+ browser->top = browser->top + browser->nr_entries + offset;
+ break;
+ default:
+ return;
+ }
+}
+
+unsigned int ui_browser__argv_refresh(struct ui_browser *browser)
+{
+ unsigned int row = 0, idx = browser->top_idx;
+ char **pos;
+
+ if (browser->top == NULL)
+ browser->top = browser->entries;
+
+ pos = (char **)browser->top;
+ while (idx < browser->nr_entries) {
+ if (!browser->filter || !browser->filter(browser, *pos)) {
+ ui_browser__gotorc(browser, row, 0);
+ browser->write(browser, pos, row);
+ if (++row == browser->height)
+ break;
+ }
+
+ ++idx;
+ ++pos;
+ }
+
+ return row;
+}
+
void ui_browser__init(void)
{
int i = 0;
int ui_browser__refresh(struct ui_browser *self);
int ui_browser__run(struct ui_browser *browser, int delay_secs);
void ui_browser__update_nr_entries(struct ui_browser *browser, u32 nr_entries);
+void ui_browser__handle_resize(struct ui_browser *browser);
+
+int ui_browser__warning(struct ui_browser *browser, int timeout,
+ const char *format, ...);
+int ui_browser__help_window(struct ui_browser *browser, const char *text);
+bool ui_browser__dialog_yesno(struct ui_browser *browser, const char *text);
+
+void ui_browser__argv_seek(struct ui_browser *browser, off_t offset, int whence);
+unsigned int ui_browser__argv_refresh(struct ui_browser *browser);
void ui_browser__rb_tree_seek(struct ui_browser *self, off_t offset, int whence);
unsigned int ui_browser__rb_tree_refresh(struct ui_browser *self);
+#include "../../util.h"
#include "../browser.h"
#include "../helpline.h"
#include "../libslang.h"
+#include "../ui.h"
+#include "../util.h"
#include "../../annotate.h"
#include "../../hist.h"
#include "../../sort.h"
#include <pthread.h>
#include <newt.h>
-static void ui__error_window(const char *fmt, ...)
-{
- va_list ap;
-
- va_start(ap, fmt);
- newtWinMessagev((char *)"Error", (char *)"Ok", (char *)fmt, ap);
- va_end(ap);
-}
-
struct annotate_browser {
struct ui_browser b;
struct rb_root entries;
return -1;
if (symbol__annotate(sym, map, sizeof(struct objdump_line_rb_node)) < 0) {
- ui__error_window(ui_helpline__last_msg);
+ ui__error("%s", ui_helpline__last_msg);
return -1;
}
#include "../browser.h"
#include "../helpline.h"
#include "../util.h"
+#include "../ui.h"
#include "map.h"
struct hist_browser {
ui_browser__reset_index(&self->b);
}
+static void ui_browser__warn_lost_events(struct ui_browser *browser)
+{
+ ui_browser__warning(browser, 4,
+ "Events are being lost, check IO/CPU overload!\n\n"
+ "You may want to run 'perf' using a RT scheduler policy:\n\n"
+ " perf top -r 80\n\n"
+ "Or reduce the sampling frequency.");
+}
+
static int hist_browser__run(struct hist_browser *self, const char *ev_name,
void(*timer)(void *arg), void *arg, int delay_secs)
{
key = ui_browser__run(&self->b, delay_secs);
switch (key) {
- case -1:
- /* FIXME we need to check if it was es.reason == NEWT_EXIT_TIMER */
+ case K_TIMER:
timer(arg);
ui_browser__update_nr_entries(&self->b, self->hists->nr_entries);
- hists__browser_title(self->hists, title, sizeof(title),
- ev_name);
+
+ if (self->hists->stats.nr_lost_warned !=
+ self->hists->stats.nr_events[PERF_RECORD_LOST]) {
+ self->hists->stats.nr_lost_warned =
+ self->hists->stats.nr_events[PERF_RECORD_LOST];
+ ui_browser__warn_lost_events(&self->b);
+ }
+
+ hists__browser_title(self->hists, title, sizeof(title), ev_name);
ui_browser__show_title(&self->b, title);
continue;
case 'D': { /* Debug */
goto out_free_stack;
case 'a':
if (!browser->has_symbols) {
- ui__warning(
+ ui_browser__warning(&browser->b, delay_secs * 2,
"Annotation is only available for symbolic views, "
"include \"sym\" in --sort to use it.");
continue;
case K_F1:
case 'h':
case '?':
- ui__help_window("h/?/F1 Show this window\n"
+ ui_browser__help_window(&browser->b,
+ "h/?/F1 Show this window\n"
"UP/DOWN/PGUP\n"
"PGDN/SPACE Navigate\n"
"q/ESC/CTRL+C Exit browser\n\n"
"C Collapse all callchains\n"
"E Expand all callchains\n"
"d Zoom into current DSO\n"
- "t Zoom into current Thread\n");
+ "t Zoom into current Thread");
continue;
case K_ENTER:
case K_RIGHT:
}
case K_ESC:
if (!left_exits &&
- !ui__dialog_yesno("Do you really want to exit?"))
+ !ui_browser__dialog_yesno(&browser->b,
+ "Do you really want to exit?"))
continue;
/* Fall thru */
case 'q':
if (choice == annotate) {
struct hist_entry *he;
+ int err;
do_annotate:
he = hist_browser__selected_entry(browser);
if (he == NULL)
* Don't let this be freed, say, by hists__decay_entry.
*/
he->used = true;
- hist_entry__tui_annotate(he, evsel->idx, nr_events,
- timer, arg, delay_secs);
+ err = hist_entry__tui_annotate(he, evsel->idx, nr_events,
+ timer, arg, delay_secs);
he->used = false;
ui_browser__update_nr_entries(&browser->b, browser->hists->nr_entries);
+ if (err)
+ ui_browser__handle_resize(&browser->b);
} else if (choice == browse_map)
map__browse(browser->selection->map);
else if (choice == zoom_dso) {
struct perf_evsel_menu {
struct ui_browser b;
struct perf_evsel *selection;
+ bool lost_events, lost_events_warned;
};
static void perf_evsel_menu__write(struct ui_browser *browser,
unsigned long nr_events = evsel->hists.stats.nr_events[PERF_RECORD_SAMPLE];
const char *ev_name = event_name(evsel);
char bf[256], unit;
+ const char *warn = " ";
+ size_t printed;
ui_browser__set_color(browser, current_entry ? HE_COLORSET_SELECTED :
HE_COLORSET_NORMAL);
nr_events = convert_unit(nr_events, &unit);
- snprintf(bf, sizeof(bf), "%lu%c%s%s", nr_events,
- unit, unit == ' ' ? "" : " ", ev_name);
- slsmg_write_nstring(bf, browser->width);
+ printed = snprintf(bf, sizeof(bf), "%lu%c%s%s", nr_events,
+ unit, unit == ' ' ? "" : " ", ev_name);
+ slsmg_printf("%s", bf);
+
+ nr_events = evsel->hists.stats.nr_events[PERF_RECORD_LOST];
+ if (nr_events != 0) {
+ menu->lost_events = true;
+ if (!current_entry)
+ ui_browser__set_color(browser, HE_COLORSET_TOP);
+ nr_events = convert_unit(nr_events, &unit);
+ snprintf(bf, sizeof(bf), ": %ld%c%schunks LOST!", nr_events,
+ unit, unit == ' ' ? "" : " ");
+ warn = bf;
+ }
+
+ slsmg_write_nstring(warn, browser->width - printed);
if (current_entry)
menu->selection = evsel;
switch (key) {
case K_TIMER:
timer(arg);
+
+ if (!menu->lost_events_warned && menu->lost_events) {
+ ui_browser__warn_lost_events(&menu->b);
+ menu->lost_events_warned = true;
+ }
continue;
case K_RIGHT:
case K_ENTER:
pos = list_entry(pos->node.prev, struct perf_evsel, node);
goto browse_hists;
case K_ESC:
- if (!ui__dialog_yesno("Do you really want to exit?"))
+ if (!ui_browser__dialog_yesno(&menu->b,
+ "Do you really want to exit?"))
continue;
/* Fall thru */
case 'q':
case K_LEFT:
continue;
case K_ESC:
- if (!ui__dialog_yesno("Do you really want to exit?"))
+ if (!ui_browser__dialog_yesno(&menu->b,
+ "Do you really want to exit?"))
continue;
/* Fall thru */
case 'q':
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
-#include <newt.h>
+#include <string.h>
#include "../debug.h"
#include "helpline.h"
#include "ui.h"
+#include "libslang.h"
void ui_helpline__pop(void)
{
- newtPopHelpLine();
}
+char ui_helpline__current[512];
+
void ui_helpline__push(const char *msg)
{
- newtPushHelpLine(msg);
+ const size_t sz = sizeof(ui_helpline__current);
+
+ SLsmg_gotorc(SLtt_Screen_Rows - 1, 0);
+ SLsmg_set_color(0);
+ SLsmg_write_nstring((char *)msg, SLtt_Screen_Cols);
+ SLsmg_refresh();
+ strncpy(ui_helpline__current, msg, sz)[sz - 1] = '\0';
}
void ui_helpline__vpush(const char *fmt, va_list ap)
if (ui_helpline__last_msg[backlog - 1] == '\n') {
ui_helpline__puts(ui_helpline__last_msg);
- newtRefresh();
+ SLsmg_refresh();
backlog = 0;
}
pthread_mutex_unlock(&ui__lock);
void ui_helpline__fpush(const char *fmt, ...);
void ui_helpline__puts(const char *msg);
+extern char ui_helpline__current[];
+
#endif /* _PERF_UI_HELPLINE_H_ */
-#include <stdlib.h>
-#include <newt.h>
#include "../cache.h"
#include "progress.h"
+#include "libslang.h"
+#include "ui.h"
+#include "browser.h"
-struct ui_progress {
- newtComponent form, scale;
-};
-
-struct ui_progress *ui_progress__new(const char *title, u64 total)
-{
- struct ui_progress *self = malloc(sizeof(*self));
-
- if (self != NULL) {
- int cols;
-
- if (use_browser <= 0)
- return self;
- newtGetScreenSize(&cols, NULL);
- cols -= 4;
- newtCenteredWindow(cols, 1, title);
- self->form = newtForm(NULL, NULL, 0);
- if (self->form == NULL)
- goto out_free_self;
- self->scale = newtScale(0, 0, cols, total);
- if (self->scale == NULL)
- goto out_free_form;
- newtFormAddComponent(self->form, self->scale);
- newtRefresh();
- }
-
- return self;
-
-out_free_form:
- newtFormDestroy(self->form);
-out_free_self:
- free(self);
- return NULL;
-}
-
-void ui_progress__update(struct ui_progress *self, u64 curr)
+void ui_progress__update(u64 curr, u64 total, const char *title)
{
+ int bar, y;
/*
* FIXME: We should have a per UI backend way of showing progress,
* stdio will just show a percentage as NN%, etc.
*/
if (use_browser <= 0)
return;
- newtScaleSet(self->scale, curr);
- newtRefresh();
-}
-void ui_progress__delete(struct ui_progress *self)
-{
- if (use_browser > 0) {
- newtFormDestroy(self->form);
- newtPopWindow();
- }
- free(self);
+ ui__refresh_dimensions(true);
+ pthread_mutex_lock(&ui__lock);
+ y = SLtt_Screen_Rows / 2 - 2;
+ SLsmg_set_color(0);
+ SLsmg_draw_box(y, 0, 3, SLtt_Screen_Cols);
+ SLsmg_gotorc(y++, 1);
+ SLsmg_write_string((char *)title);
+ SLsmg_set_color(HE_COLORSET_SELECTED);
+ bar = ((SLtt_Screen_Cols - 2) * curr) / total;
+ SLsmg_fill_region(y, 1, 1, bar, ' ');
+ SLsmg_refresh();
+ pthread_mutex_unlock(&ui__lock);
}
#ifndef _PERF_UI_PROGRESS_H_
#define _PERF_UI_PROGRESS_H_ 1
-struct ui_progress;
+#include <../types.h>
-struct ui_progress *ui_progress__new(const char *title, u64 total);
-void ui_progress__delete(struct ui_progress *self);
-
-void ui_progress__update(struct ui_progress *self, u64 curr);
+void ui_progress__update(u64 curr, u64 total, const char *title);
#endif
#include "browser.h"
#include "helpline.h"
#include "ui.h"
+#include "util.h"
#include "libslang.h"
+#include "keysyms.h"
pthread_mutex_t ui__lock = PTHREAD_MUTEX_INITIALIZER;
+static volatile int ui__need_resize;
+
+void ui__refresh_dimensions(bool force)
+{
+ if (force || ui__need_resize) {
+ ui__need_resize = 0;
+ pthread_mutex_lock(&ui__lock);
+ SLtt_get_screen_size();
+ SLsmg_reinit_smg();
+ pthread_mutex_unlock(&ui__lock);
+ }
+}
+
+static void ui__sigwinch(int sig __used)
+{
+ ui__need_resize = 1;
+}
+
+static void ui__setup_sigwinch(void)
+{
+ static bool done;
+
+ if (done)
+ return;
+
+ done = true;
+ pthread__unblock_sigwinch();
+ signal(SIGWINCH, ui__sigwinch);
+}
+
+int ui__getch(int delay_secs)
+{
+ struct timeval timeout, *ptimeout = delay_secs ? &timeout : NULL;
+ fd_set read_set;
+ int err, key;
+
+ ui__setup_sigwinch();
+
+ FD_ZERO(&read_set);
+ FD_SET(0, &read_set);
+
+ if (delay_secs) {
+ timeout.tv_sec = delay_secs;
+ timeout.tv_usec = 0;
+ }
+
+ err = select(1, &read_set, NULL, NULL, ptimeout);
+
+ if (err == 0)
+ return K_TIMER;
+
+ if (err == -1) {
+ if (errno == EINTR)
+ return K_RESIZE;
+ return K_ERROR;
+ }
+
+ key = SLang_getkey();
+ if (key != K_ESC)
+ return key;
+
+ FD_ZERO(&read_set);
+ FD_SET(0, &read_set);
+ timeout.tv_sec = 0;
+ timeout.tv_usec = 20;
+ err = select(1, &read_set, NULL, NULL, &timeout);
+ if (err == 0)
+ return K_ESC;
+
+ SLang_ungetkey(key);
+ return SLkp_getkey();
+}
+
static void newt_suspend(void *d __used)
{
newtSuspend();
void exit_browser(bool wait_for_ok)
{
if (use_browser > 0) {
- if (wait_for_ok) {
- char title[] = "Fatal Error", ok[] = "Ok";
- newtWinMessage(title, ok, ui_helpline__last_msg);
- }
+ if (wait_for_ok)
+ ui__question_window("Fatal Error",
+ ui_helpline__last_msg,
+ "Press any key...", 0);
ui__exit();
}
}
#define _PERF_UI_H_ 1
#include <pthread.h>
+#include <stdbool.h>
extern pthread_mutex_t ui__lock;
+void ui__refresh_dimensions(bool force);
+
#endif /* _PERF_UI_H_ */
-#include <newt.h>
+#include "../util.h"
#include <signal.h>
-#include <stdio.h>
#include <stdbool.h>
#include <string.h>
#include <sys/ttydefaults.h>
#include "../cache.h"
#include "../debug.h"
#include "browser.h"
+#include "keysyms.h"
#include "helpline.h"
#include "ui.h"
#include "util.h"
+#include "libslang.h"
-static void newt_form__set_exit_keys(newtComponent self)
+static void ui_browser__argv_write(struct ui_browser *browser,
+ void *entry, int row)
{
- newtFormAddHotKey(self, NEWT_KEY_LEFT);
- newtFormAddHotKey(self, NEWT_KEY_ESCAPE);
- newtFormAddHotKey(self, 'Q');
- newtFormAddHotKey(self, 'q');
- newtFormAddHotKey(self, CTRL('c'));
-}
+ char **arg = entry;
+ bool current_entry = ui_browser__is_current_entry(browser, row);
-static newtComponent newt_form__new(void)
-{
- newtComponent self = newtForm(NULL, NULL, 0);
- if (self)
- newt_form__set_exit_keys(self);
- return self;
+ ui_browser__set_color(browser, current_entry ? HE_COLORSET_SELECTED :
+ HE_COLORSET_NORMAL);
+ slsmg_write_nstring(*arg, browser->width);
}
-int ui__popup_menu(int argc, char * const argv[])
+static int popup_menu__run(struct ui_browser *menu)
{
- struct newtExitStruct es;
- int i, rc = -1, max_len = 5;
- newtComponent listbox, form = newt_form__new();
+ int key;
- if (form == NULL)
+ if (ui_browser__show(menu, " ", "ESC: exit, ENTER|->: Select option") < 0)
return -1;
- listbox = newtListbox(0, 0, argc, NEWT_FLAG_RETURNEXIT);
- if (listbox == NULL)
- goto out_destroy_form;
+ while (1) {
+ key = ui_browser__run(menu, 0);
- newtFormAddComponent(form, listbox);
+ switch (key) {
+ case K_RIGHT:
+ case K_ENTER:
+ key = menu->index;
+ break;
+ case K_LEFT:
+ case K_ESC:
+ case 'q':
+ case CTRL('c'):
+ key = -1;
+ break;
+ default:
+ continue;
+ }
- for (i = 0; i < argc; ++i) {
- int len = strlen(argv[i]);
- if (len > max_len)
- max_len = len;
- if (newtListboxAddEntry(listbox, argv[i], (void *)(long)i))
- goto out_destroy_form;
+ break;
}
- newtCenteredWindow(max_len, argc, NULL);
- newtFormRun(form, &es);
- rc = newtListboxGetCurrent(listbox) - NULL;
- if (es.reason == NEWT_EXIT_HOTKEY)
- rc = -1;
- newtPopWindow();
-out_destroy_form:
- newtFormDestroy(form);
- return rc;
+ ui_browser__hide(menu);
+ return key;
}
-int ui__help_window(const char *text)
+int ui__popup_menu(int argc, char * const argv[])
{
- struct newtExitStruct es;
- newtComponent tb, form = newt_form__new();
- int rc = -1;
+ struct ui_browser menu = {
+ .entries = (void *)argv,
+ .refresh = ui_browser__argv_refresh,
+ .seek = ui_browser__argv_seek,
+ .write = ui_browser__argv_write,
+ .nr_entries = argc,
+ };
+
+ return popup_menu__run(&menu);
+}
+
+int ui__question_window(const char *title, const char *text,
+ const char *exit_msg, int delay_secs)
+{
+ int x, y;
int max_len = 0, nr_lines = 0;
const char *t;
- if (form == NULL)
- return -1;
-
t = text;
while (1) {
const char *sep = strchr(t, '\n');
t = sep + 1;
}
- tb = newtTextbox(0, 0, max_len, nr_lines, 0);
- if (tb == NULL)
- goto out_destroy_form;
-
- newtTextboxSetText(tb, text);
- newtFormAddComponent(form, tb);
- newtCenteredWindow(max_len, nr_lines, NULL);
- newtFormRun(form, &es);
- newtPopWindow();
- rc = 0;
-out_destroy_form:
- newtFormDestroy(form);
- return rc;
+ max_len += 2;
+ nr_lines += 4;
+ y = SLtt_Screen_Rows / 2 - nr_lines / 2,
+ x = SLtt_Screen_Cols / 2 - max_len / 2;
+
+ SLsmg_set_color(0);
+ SLsmg_draw_box(y, x++, nr_lines, max_len);
+ if (title) {
+ SLsmg_gotorc(y, x + 1);
+ SLsmg_write_string((char *)title);
+ }
+ SLsmg_gotorc(++y, x);
+ nr_lines -= 2;
+ max_len -= 2;
+ SLsmg_write_wrapped_string((unsigned char *)text, y, x,
+ nr_lines, max_len, 1);
+ SLsmg_gotorc(y + nr_lines - 2, x);
+ SLsmg_write_nstring((char *)" ", max_len);
+ SLsmg_gotorc(y + nr_lines - 1, x);
+ SLsmg_write_nstring((char *)exit_msg, max_len);
+ SLsmg_refresh();
+ return ui__getch(delay_secs);
}
-static const char yes[] = "Yes", no[] = "No",
- warning_str[] = "Warning!", ok[] = "Ok";
+int ui__help_window(const char *text)
+{
+ return ui__question_window("Help", text, "Press any key...", 0);
+}
-bool ui__dialog_yesno(const char *msg)
+int ui__dialog_yesno(const char *msg)
{
- /* newtWinChoice should really be accepting const char pointers... */
- return newtWinChoice(NULL, (char *)yes, (char *)no, (char *)msg) == 1;
+ return ui__question_window(NULL, msg, "Enter: Yes, ESC: No", 0);
}
-void ui__warning(const char *format, ...)
+int __ui__warning(const char *title, const char *format, va_list args)
{
- va_list args;
+ char *s;
+
+ if (use_browser > 0 && vasprintf(&s, format, args) > 0) {
+ int key;
- va_start(args, format);
- if (use_browser > 0) {
pthread_mutex_lock(&ui__lock);
- newtWinMessagev((char *)warning_str, (char *)ok,
- (char *)format, args);
+ key = ui__question_window(title, s, "Press any key...", 0);
pthread_mutex_unlock(&ui__lock);
- } else
- vfprintf(stderr, format, args);
+ free(s);
+ return key;
+ }
+
+ fprintf(stderr, "%s:\n", title);
+ vfprintf(stderr, format, args);
+ return K_ESC;
+}
+
+int ui__warning(const char *format, ...)
+{
+ int key;
+ va_list args;
+
+ va_start(args, format);
+ key = __ui__warning("Warning", format, args);
+ va_end(args);
+ return key;
+}
+
+int ui__error(const char *format, ...)
+{
+ int key;
+ va_list args;
+
+ va_start(args, format);
+ key = __ui__warning("Error", format, args);
va_end(args);
+ return key;
}
#ifndef _PERF_UI_UTIL_H_
#define _PERF_UI_UTIL_H_ 1
-#include <stdbool.h>
+#include <stdarg.h>
+int ui__getch(int delay_secs);
int ui__popup_menu(int argc, char * const argv[]);
int ui__help_window(const char *text);
-bool ui__dialog_yesno(const char *msg);
+int ui__dialog_yesno(const char *msg);
+int ui__question_window(const char *title, const char *text,
+ const char *exit_msg, int delay_secs);
+int __ui__warning(const char *title, const char *format, va_list args);
#endif /* _PERF_UI_UTIL_H_ */
void dump_cnt(struct counters *cnt)
{
- fprintf(stderr, "package: %d ", cnt->pkg);
- fprintf(stderr, "core:: %d ", cnt->core);
- fprintf(stderr, "CPU: %d ", cnt->cpu);
- fprintf(stderr, "TSC: %016llX\n", cnt->tsc);
- fprintf(stderr, "c3: %016llX\n", cnt->c3);
- fprintf(stderr, "c6: %016llX\n", cnt->c6);
- fprintf(stderr, "c7: %016llX\n", cnt->c7);
- fprintf(stderr, "aperf: %016llX\n", cnt->aperf);
- fprintf(stderr, "pc2: %016llX\n", cnt->pc2);
- fprintf(stderr, "pc3: %016llX\n", cnt->pc3);
- fprintf(stderr, "pc6: %016llX\n", cnt->pc6);
- fprintf(stderr, "pc7: %016llX\n", cnt->pc7);
- fprintf(stderr, "msr0x%x: %016llX\n", extra_msr_offset, cnt->extra_msr);
+ if (!cnt)
+ return;
+ if (cnt->pkg) fprintf(stderr, "package: %d ", cnt->pkg);
+ if (cnt->core) fprintf(stderr, "core:: %d ", cnt->core);
+ if (cnt->cpu) fprintf(stderr, "CPU: %d ", cnt->cpu);
+ if (cnt->tsc) fprintf(stderr, "TSC: %016llX\n", cnt->tsc);
+ if (cnt->c3) fprintf(stderr, "c3: %016llX\n", cnt->c3);
+ if (cnt->c6) fprintf(stderr, "c6: %016llX\n", cnt->c6);
+ if (cnt->c7) fprintf(stderr, "c7: %016llX\n", cnt->c7);
+ if (cnt->aperf) fprintf(stderr, "aperf: %016llX\n", cnt->aperf);
+ if (cnt->pc2) fprintf(stderr, "pc2: %016llX\n", cnt->pc2);
+ if (cnt->pc3) fprintf(stderr, "pc3: %016llX\n", cnt->pc3);
+ if (cnt->pc6) fprintf(stderr, "pc6: %016llX\n", cnt->pc6);
+ if (cnt->pc7) fprintf(stderr, "pc7: %016llX\n", cnt->pc7);
+ if (cnt->extra_msr) fprintf(stderr, "msr0x%x: %016llX\n", extra_msr_offset, cnt->extra_msr);
}
void dump_list(struct counters *cnt)
$default{"BISECT_SKIP"} = 1;
$default{"SUCCESS_LINE"} = "login:";
$default{"DETECT_TRIPLE_FAULT"} = 1;
+$default{"NO_INSTALL"} = 0;
$default{"BOOTED_TIMEOUT"} = 1;
$default{"DIE_ON_FAILURE"} = 1;
$default{"SSH_EXEC"} = "ssh \$SSH_USER\@\$MACHINE \$SSH_COMMAND";
my $target;
my $make;
my $post_install;
+my $no_install;
my $noclean;
my $minconfig;
my $start_minconfig;
my $booted_timeout;
my $detect_triplefault;
my $console;
+my $reboot_success_line;
my $success_line;
my $stop_after_success;
my $stop_after_failure;
my %variable;
my %force_config;
+# do not force reboots on config problems
+my $no_reboot = 1;
+
+# default variables that can be used
+chomp ($variable{"PWD"} = `pwd`);
+
$config_help{"MACHINE"} = << "EOF"
The machine hostname that you will test.
EOF
sub get_ktest_config {
my ($config) = @_;
+ my $ans;
return if (defined($opt{$config}));
if (defined($default{$config})) {
print "\[$default{$config}\] ";
}
- $entered_configs{$config} = <STDIN>;
- $entered_configs{$config} =~ s/^\s*(.*\S)\s*$/$1/;
- if ($entered_configs{$config} =~ /^\s*$/) {
+ $ans = <STDIN>;
+ $ans =~ s/^\s*(.*\S)\s*$/$1/;
+ if ($ans =~ /^\s*$/) {
if ($default{$config}) {
- $entered_configs{$config} = $default{$config};
+ $ans = $default{$config};
} else {
print "Your answer can not be blank\n";
next;
}
}
+ $entered_configs{$config} = process_variables($ans);
last;
}
}
}
sub process_variables {
- my ($value) = @_;
+ my ($value, $remove_undef) = @_;
my $retval = "";
# We want to check for '\', and it is just easier
$retval = "$retval$begin";
if (defined($variable{$var})) {
$retval = "$retval$variable{$var}";
+ } elsif (defined($remove_undef) && $remove_undef) {
+ # for if statements, any variable that is not defined,
+ # we simple convert to 0
+ $retval = "${retval}0";
} else {
# put back the origin piece.
$retval = "$retval\$\{$var\}";
}
sub set_value {
- my ($lvalue, $rvalue) = @_;
+ my ($lvalue, $rvalue, $override, $overrides, $name) = @_;
if (defined($opt{$lvalue})) {
- die "Error: Option $lvalue defined more than once!\n";
+ if (!$override || defined(${$overrides}{$lvalue})) {
+ my $extra = "";
+ if ($override) {
+ $extra = "In the same override section!\n";
+ }
+ die "$name: $.: Option $lvalue defined more than once!\n$extra";
+ }
+ ${$overrides}{$lvalue} = $rvalue;
}
if ($rvalue =~ /^\s*$/) {
delete $opt{$lvalue};
}
}
-sub read_config {
- my ($config) = @_;
+sub process_compare {
+ my ($lval, $cmp, $rval) = @_;
+
+ # remove whitespace
+
+ $lval =~ s/^\s*//;
+ $lval =~ s/\s*$//;
+
+ $rval =~ s/^\s*//;
+ $rval =~ s/\s*$//;
+
+ if ($cmp eq "==") {
+ return $lval eq $rval;
+ } elsif ($cmp eq "!=") {
+ return $lval ne $rval;
+ }
+
+ my $statement = "$lval $cmp $rval";
+ my $ret = eval $statement;
+
+ # $@ stores error of eval
+ if ($@) {
+ return -1;
+ }
+
+ return $ret;
+}
+
+sub value_defined {
+ my ($val) = @_;
+
+ return defined($variable{$2}) ||
+ defined($opt{$2});
+}
+
+my $d = 0;
+sub process_expression {
+ my ($name, $val) = @_;
+
+ my $c = $d++;
+
+ while ($val =~ s/\(([^\(]*?)\)/\&\&\&\&VAL\&\&\&\&/) {
+ my $express = $1;
+
+ if (process_expression($name, $express)) {
+ $val =~ s/\&\&\&\&VAL\&\&\&\&/ 1 /;
+ } else {
+ $val =~ s/\&\&\&\&VAL\&\&\&\&/ 0 /;
+ }
+ }
+
+ $d--;
+ my $OR = "\\|\\|";
+ my $AND = "\\&\\&";
+
+ while ($val =~ s/^(.*?)($OR|$AND)//) {
+ my $express = $1;
+ my $op = $2;
+
+ if (process_expression($name, $express)) {
+ if ($op eq "||") {
+ return 1;
+ }
+ } else {
+ if ($op eq "&&") {
+ return 0;
+ }
+ }
+ }
+
+ if ($val =~ /(.*)(==|\!=|>=|<=|>|<)(.*)/) {
+ my $ret = process_compare($1, $2, $3);
+ if ($ret < 0) {
+ die "$name: $.: Unable to process comparison\n";
+ }
+ return $ret;
+ }
+
+ if ($val =~ /^\s*(NOT\s*)?DEFINED\s+(\S+)\s*$/) {
+ if (defined $1) {
+ return !value_defined($2);
+ } else {
+ return value_defined($2);
+ }
+ }
+
+ if ($val =~ /^\s*0\s*$/) {
+ return 0;
+ } elsif ($val =~ /^\s*\d+\s*$/) {
+ return 1;
+ }
+
+ die ("$name: $.: Undefined content $val in if statement\n");
+}
+
+sub process_if {
+ my ($name, $value) = @_;
+
+ # Convert variables and replace undefined ones with 0
+ my $val = process_variables($value, 1);
+ my $ret = process_expression $name, $val;
+
+ return $ret;
+}
- open(IN, $config) || die "can't read file $config";
+sub __read_config {
+ my ($config, $current_test_num) = @_;
+
+ my $in;
+ open($in, $config) || die "can't read file $config";
my $name = $config;
$name =~ s,.*/(.*),$1,;
- my $test_num = 0;
+ my $test_num = $$current_test_num;
my $default = 1;
my $repeat = 1;
my $num_tests_set = 0;
my $skip = 0;
my $rest;
+ my $line;
my $test_case = 0;
+ my $if = 0;
+ my $if_set = 0;
+ my $override = 0;
- while (<IN>) {
+ my %overrides;
+
+ while (<$in>) {
# ignore blank lines and comments
next if (/^\s*$/ || /\s*\#/);
- if (/^\s*TEST_START(.*)/) {
+ if (/^\s*(TEST_START|DEFAULTS)\b(.*)/) {
- $rest = $1;
+ my $type = $1;
+ $rest = $2;
+ $line = $2;
- if ($num_tests_set) {
- die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n";
- }
+ my $old_test_num;
+ my $old_repeat;
+ $override = 0;
+
+ if ($type eq "TEST_START") {
+
+ if ($num_tests_set) {
+ die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n";
+ }
- my $old_test_num = $test_num;
- my $old_repeat = $repeat;
+ $old_test_num = $test_num;
+ $old_repeat = $repeat;
- $test_num += $repeat;
- $default = 0;
- $repeat = 1;
+ $test_num += $repeat;
+ $default = 0;
+ $repeat = 1;
+ } else {
+ $default = 1;
+ }
- if ($rest =~ /\s+SKIP(.*)/) {
- $rest = $1;
+ # If SKIP is anywhere in the line, the command will be skipped
+ if ($rest =~ s/\s+SKIP\b//) {
$skip = 1;
} else {
$test_case = 1;
$skip = 0;
}
- if ($rest =~ /\s+ITERATE\s+(\d+)(.*)$/) {
- $repeat = $1;
- $rest = $2;
- $repeat_tests{"$test_num"} = $repeat;
+ if ($rest =~ s/\sELSE\b//) {
+ if (!$if) {
+ die "$name: $.: ELSE found with out matching IF section\n$_";
+ }
+ $if = 0;
+
+ if ($if_set) {
+ $skip = 1;
+ } else {
+ $skip = 0;
+ }
}
- if ($rest =~ /\s+SKIP(.*)/) {
- $rest = $1;
- $skip = 1;
+ if ($rest =~ s/\sIF\s+(.*)//) {
+ if (process_if($name, $1)) {
+ $if_set = 1;
+ } else {
+ $skip = 1;
+ }
+ $if = 1;
+ } else {
+ $if = 0;
+ $if_set = 0;
}
- if ($rest !~ /^\s*$/) {
- die "$name: $.: Gargbage found after TEST_START\n$_";
+ if (!$skip) {
+ if ($type eq "TEST_START") {
+ if ($rest =~ s/\s+ITERATE\s+(\d+)//) {
+ $repeat = $1;
+ $repeat_tests{"$test_num"} = $repeat;
+ }
+ } elsif ($rest =~ s/\sOVERRIDE\b//) {
+ # DEFAULT only
+ $override = 1;
+ # Clear previous overrides
+ %overrides = ();
+ }
+ }
+
+ if (!$skip && $rest !~ /^\s*$/) {
+ die "$name: $.: Gargbage found after $type\n$_";
}
- if ($skip) {
+ if ($skip && $type eq "TEST_START") {
$test_num = $old_test_num;
$repeat = $old_repeat;
}
- } elsif (/^\s*DEFAULTS(.*)$/) {
- $default = 1;
-
+ } elsif (/^\s*ELSE\b(.*)$/) {
+ if (!$if) {
+ die "$name: $.: ELSE found with out matching IF section\n$_";
+ }
$rest = $1;
-
- if ($rest =~ /\s+SKIP(.*)/) {
- $rest = $1;
+ if ($if_set) {
$skip = 1;
+ $rest = "";
} else {
$skip = 0;
+
+ if ($rest =~ /\sIF\s+(.*)/) {
+ # May be a ELSE IF section.
+ if (!process_if($name, $1)) {
+ $skip = 1;
+ }
+ $rest = "";
+ } else {
+ $if = 0;
+ }
}
if ($rest !~ /^\s*$/) {
die "$name: $.: Gargbage found after DEFAULTS\n$_";
}
+ } elsif (/^\s*INCLUDE\s+(\S+)/) {
+
+ next if ($skip);
+
+ if (!$default) {
+ die "$name: $.: INCLUDE can only be done in default sections\n$_";
+ }
+
+ my $file = process_variables($1);
+
+ if ($file !~ m,^/,) {
+ # check the path of the config file first
+ if ($config =~ m,(.*)/,) {
+ if (-f "$1/$file") {
+ $file = "$1/$file";
+ }
+ }
+ }
+
+ if ( ! -r $file ) {
+ die "$name: $.: Can't read file $file\n$_";
+ }
+
+ if (__read_config($file, \$test_num)) {
+ $test_case = 1;
+ }
+
} elsif (/^\s*([A-Z_\[\]\d]+)\s*=\s*(.*?)\s*$/) {
next if ($skip);
}
if ($default || $lvalue =~ /\[\d+\]$/) {
- set_value($lvalue, $rvalue);
+ set_value($lvalue, $rvalue, $override, \%overrides, $name);
} else {
my $val = "$lvalue\[$test_num\]";
- set_value($val, $rvalue);
+ set_value($val, $rvalue, $override, \%overrides, $name);
if ($repeat > 1) {
$repeats{$val} = $repeat;
}
}
- close(IN);
-
if ($test_num) {
$test_num += $repeat - 1;
$opt{"NUM_TESTS"} = $test_num;
}
+ close($in);
+
+ $$current_test_num = $test_num;
+
+ return $test_case;
+}
+
+sub read_config {
+ my ($config) = @_;
+
+ my $test_case;
+ my $test_num = 0;
+
+ $test_case = __read_config $config, \$test_num;
+
# make sure we have all mandatory configs
get_ktest_configs;
}
sub run_command;
+sub start_monitor;
+sub end_monitor;
+sub wait_for_monitor;
sub reboot {
+ my ($time) = @_;
+
+ if (defined($time)) {
+ start_monitor;
+ # flush out current monitor
+ # May contain the reboot success line
+ wait_for_monitor 1;
+ }
+
# try to reboot normally
if (run_command $reboot) {
if (defined($powercycle_after_reboot)) {
# nope? power cycle it.
run_command "$power_cycle";
}
+
+ if (defined($time)) {
+ wait_for_monitor($time, $reboot_success_line);
+ end_monitor;
+ }
}
sub do_not_reboot {
my $i = $iteration;
- return $test_type eq "build" ||
+ return $test_type eq "build" || $no_reboot ||
($test_type eq "patchcheck" && $opt{"PATCHCHECK_TYPE[$i]"} eq "build") ||
($test_type eq "bisect" && $opt{"BISECT_TYPE[$i]"} eq "build");
}
}
sub wait_for_monitor {
- my ($time) = @_;
+ my ($time, $stop) = @_;
+ my $full_line = "";
my $line;
+ my $booted = 0;
doprint "** Wait for monitor to settle down **\n";
# read the monitor and wait for the system to calm down
- do {
+ while (!$booted) {
$line = wait_for_input($monitor_fp, $time);
- print "$line" if (defined($line));
- } while (defined($line));
+ last if (!defined($line));
+ print "$line";
+ $full_line .= $line;
+
+ if (defined($stop) && $full_line =~ /$stop/) {
+ doprint "wait for monitor detected $stop\n";
+ $booted = 1;
+ }
+
+ if ($line =~ /\n/) {
+ $full_line = "";
+ }
+ }
print "** Monitor flushed **\n";
}
# no need to reboot for just building.
if (!do_not_reboot) {
doprint "REBOOTING\n";
- reboot;
- start_monitor;
- wait_for_monitor $sleep_time;
- end_monitor;
+ reboot $sleep_time;
}
my $name = "";
open(IN, "$ssh_grub |")
or die "unable to get menu.lst";
+ my $found = 0;
+
while (<IN>) {
if (/^\s*title\s+$grub_menu\s*$/) {
$grub_number++;
+ $found = 1;
last;
} elsif (/^\s*title\s/) {
$grub_number++;
close(IN);
die "Could not find '$grub_menu' in /boot/grub/menu on $machine"
- if ($grub_number < 0);
+ if (!$found);
doprint "$grub_number\n";
}
sub reboot_to {
if ($reboot_type eq "grub") {
- run_ssh "'(echo \"savedefault --default=$grub_number --once\" | grub --batch && reboot)'";
+ run_ssh "'(echo \"savedefault --default=$grub_number --once\" | grub --batch)'";
+ reboot;
return;
}
sub install {
+ return if ($no_install);
+
run_scp "$outputdir/$build_target", "$target_image" or
dodie "failed to copy image";
}
sub start_monitor_and_boot {
+ # Make sure the stable kernel has finished booting
+ start_monitor;
+ wait_for_monitor 5;
+ end_monitor;
+
get_grub_index;
get_version;
install;
unlink $buildlog;
+ # Failed builds should not reboot the target
+ my $save_no_reboot = $no_reboot;
+ $no_reboot = 1;
+
if (defined($pre_build)) {
my $ret = run_command $pre_build;
if (!$ret && defined($pre_build_die) &&
# allow for empty configs
run_command "touch $output_config";
- run_command "mv $output_config $outputdir/config_temp" or
- dodie "moving .config";
+ if (!$noclean) {
+ run_command "mv $output_config $outputdir/config_temp" or
+ dodie "moving .config";
- if (!$noclean && !run_command "$make mrproper") {
- dodie "make mrproper";
- }
+ run_command "$make mrproper" or dodie "make mrproper";
- run_command "mv $outputdir/config_temp $output_config" or
- dodie "moving config_temp";
+ run_command "mv $outputdir/config_temp $output_config" or
+ dodie "moving config_temp";
+ }
} elsif (!$noclean) {
unlink "$output_config";
if (!$build_ret) {
# bisect may need this to pass
- return 0 if ($in_bisect);
+ if ($in_bisect) {
+ $no_reboot = $save_no_reboot;
+ return 0;
+ }
fail "failed build" and return 0;
}
+ $no_reboot = $save_no_reboot;
+
return 1;
}
if ($i != $opt{"NUM_TESTS"} && !do_not_reboot) {
doprint "Reboot and wait $sleep_time seconds\n";
- reboot;
- start_monitor;
- wait_for_monitor $sleep_time;
- end_monitor;
+ reboot $sleep_time;
}
}
sub bisect_reboot {
doprint "Reboot and sleep $bisect_sleep_time seconds\n";
- reboot;
- start_monitor;
- wait_for_monitor $bisect_sleep_time;
- end_monitor;
+ reboot $bisect_sleep_time;
}
# returns 1 on success, 0 on failure, -1 on skip
sub patchcheck_reboot {
doprint "Reboot and sleep $patchcheck_sleep_time seconds\n";
- reboot;
- start_monitor;
- wait_for_monitor $patchcheck_sleep_time;
- end_monitor;
+ reboot $patchcheck_sleep_time;
}
sub patchcheck {
}
my %depends;
+my %depcount;
my $iflevel = 0;
my @ifdeps;
# prevent recursion
my %read_kconfigs;
+sub add_dep {
+ # $config depends on $dep
+ my ($config, $dep) = @_;
+
+ if (defined($depends{$config})) {
+ $depends{$config} .= " " . $dep;
+ } else {
+ $depends{$config} = $dep;
+ }
+
+ # record the number of configs depending on $dep
+ if (defined $depcount{$dep}) {
+ $depcount{$dep}++;
+ } else {
+ $depcount{$dep} = 1;
+ }
+}
+
# taken from streamline_config.pl
sub read_kconfig {
my ($kconfig) = @_;
$config = $2;
for (my $i = 0; $i < $iflevel; $i++) {
- if ($i) {
- $depends{$config} .= " " . $ifdeps[$i];
- } else {
- $depends{$config} = $ifdeps[$i];
- }
- $state = "DEP";
+ add_dep $config, $ifdeps[$i];
}
# collect the depends for the config
} elsif ($state eq "NEW" && /^\s*depends\s+on\s+(.*)$/) {
- if (defined($depends{$1})) {
- $depends{$config} .= " " . $1;
- } else {
- $depends{$config} = $1;
- }
+ add_dep $config, $1;
# Get the configs that select this config
- } elsif ($state ne "NONE" && /^\s*select\s+(\S+)/) {
- if (defined($depends{$1})) {
- $depends{$1} .= " " . $config;
- } else {
- $depends{$1} = $config;
- }
+ } elsif ($state eq "NEW" && /^\s*select\s+(\S+)/) {
+
+ # selected by depends on config
+ add_dep $1, $config;
# Check for if statements
} elsif (/^if\s+(.*\S)\s*$/) {
close OUT;
}
+sub chomp_config {
+ my ($config) = @_;
+
+ $config =~ s/CONFIG_//;
+
+ return $config;
+}
+
sub get_depends {
my ($dep) = @_;
- my $kconfig = $dep;
- $kconfig =~ s/CONFIG_//;
+ my $kconfig = chomp_config $dep;
$dep = $depends{"$kconfig"};
return undef;
}
- my $kconfig = $config;
- $kconfig =~ s/CONFIG_//;
+ my $kconfig = chomp_config $config;
# Test dependencies first
if (defined($depends{"$kconfig"})) {
my @config_keys = keys %min_configs;
+ # All configs need a depcount
+ foreach my $config (@config_keys) {
+ my $kconfig = chomp_config $config;
+ if (!defined $depcount{$kconfig}) {
+ $depcount{$kconfig} = 0;
+ }
+ }
+
# Remove anything that was set by the make allnoconfig
# we shouldn't need them as they get set for us anyway.
foreach my $config (@config_keys) {
# Now disable each config one by one and do a make oldconfig
# till we find a config that changes our list.
- # Put configs that did not modify the config at the end.
my @test_configs = keys %min_configs;
+
+ # Sort keys by who is most dependent on
+ @test_configs = sort { $depcount{chomp_config($b)} <=> $depcount{chomp_config($a)} }
+ @test_configs ;
+
+ # Put configs that did not modify the config at the end.
my $reset = 1;
for (my $i = 0; $i < $#test_configs; $i++) {
if (!defined($nochange_config{$test_configs[0]})) {
}
doprint "Reboot and wait $sleep_time seconds\n";
- reboot;
- start_monitor;
- wait_for_monitor $sleep_time;
- end_monitor;
+ reboot $sleep_time;
}
success $i;
# First we need to do is the builds
for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
+ # Do not reboot on failing test options
+ $no_reboot = 1;
+
$iteration = $i;
my $makecmd = set_test_option("MAKE_CMD", $i);
$reboot_type = set_test_option("REBOOT_TYPE", $i);
$grub_menu = set_test_option("GRUB_MENU", $i);
$post_install = set_test_option("POST_INSTALL", $i);
+ $no_install = set_test_option("NO_INSTALL", $i);
$reboot_script = set_test_option("REBOOT_SCRIPT", $i);
$reboot_on_error = set_test_option("REBOOT_ON_ERROR", $i);
$poweroff_on_error = set_test_option("POWEROFF_ON_ERROR", $i);
$console = set_test_option("CONSOLE", $i);
$detect_triplefault = set_test_option("DETECT_TRIPLE_FAULT", $i);
$success_line = set_test_option("SUCCESS_LINE", $i);
+ $reboot_success_line = set_test_option("REBOOT_SUCCESS_LINE", $i);
$stop_after_success = set_test_option("STOP_AFTER_SUCCESS", $i);
$stop_after_failure = set_test_option("STOP_AFTER_FAILURE", $i);
$stop_test_after = set_test_option("STOP_TEST_AFTER", $i);
chdir $builddir || die "can't change directory to $builddir";
- if (!-d $tmpdir) {
- mkpath($tmpdir) or
- die "can't create $tmpdir";
+ foreach my $dir ($tmpdir, $outputdir) {
+ if (!-d $dir) {
+ mkpath($dir) or
+ die "can't create $dir";
+ }
}
$ENV{"SSH_USER"} = $ssh_user;
$run_type = "ERROR";
}
+ my $installme = "";
+ $installme = " no_install" if ($no_install);
+
doprint "\n\n";
- doprint "RUNNING TEST $i of $opt{NUM_TESTS} with option $test_type $run_type\n\n";
+ doprint "RUNNING TEST $i of $opt{NUM_TESTS} with option $test_type $run_type$installme\n\n";
unlink $dmesg;
unlink $buildlog;
die "failed to checkout $checkout";
}
+ $no_reboot = 0;
+
+
if ($test_type eq "bisect") {
bisect $i;
next;
build $build_type or next;
}
+ if ($test_type eq "install") {
+ get_version;
+ install;
+ success $i;
+ next;
+ }
+
if ($test_type ne "build") {
my $failed = 0;
start_monitor_and_boot or $failed = 1;
# the same option name under the same test or as default
# ktest will fail to execute, and no tests will run.
#
+# DEFAULTS OVERRIDE
+#
+# Options defined in the DEFAULTS section can not be duplicated
+# even if they are defined in two different DEFAULT sections.
+# This is done to catch mistakes where an option is added but
+# the previous option was forgotten about and not commented.
+#
+# The OVERRIDE keyword can be added to a section to allow this
+# section to override other DEFAULT sections values that have
+# been defined previously. It will only override options that
+# have been defined before its use. Options defined later
+# in a non override section will still error. The same option
+# can not be defined in the same section even if that section
+# is marked OVERRIDE.
+#
+#
+#
+# Both TEST_START and DEFAULTS sections can also have the IF keyword
+# The value after the IF must evaluate into a 0 or non 0 positive
+# integer, and can use the config variables (explained below).
+#
+# DEFAULTS IF ${IS_X86_32}
+#
+# The above will process the DEFAULTS section if the config
+# variable IS_X86_32 evaluates to a non zero positive integer
+# otherwise if it evaluates to zero, it will act the same
+# as if the SKIP keyword was used.
+#
+# The ELSE keyword can be used directly after a section with
+# a IF statement.
+#
+# TEST_START IF ${RUN_NET_TESTS}
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network
+#
+# ELSE
+#
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-normal
+#
+#
+# The ELSE keyword can also contain an IF statement to allow multiple
+# if then else sections. But all the sections must be either
+# DEFAULT or TEST_START, they can not be a mixture.
+#
+# TEST_START IF ${RUN_NET_TESTS}
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network
+#
+# ELSE IF ${RUN_DISK_TESTS}
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-tests
+#
+# ELSE IF ${RUN_CPU_TESTS}
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-cpu
+#
+# ELSE
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network
+#
+# The if statement may also have comparisons that will and for
+# == and !=, strings may be used for both sides.
+#
+# BOX_TYPE := x86_32
+#
+# DEFAULTS IF ${BOX_TYPE} == x86_32
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-32
+# ELSE
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-64
+#
+# The DEFINED keyword can be used by the IF statements too.
+# It returns true if the given config variable or option has been defined
+# or false otherwise.
+#
+#
+# DEFAULTS IF DEFINED USE_CC
+# CC := ${USE_CC}
+# ELSE
+# CC := gcc
+#
+#
+# As well as NOT DEFINED.
+#
+# DEFAULTS IF NOT DEFINED MAKE_CMD
+# MAKE_CMD := make ARCH=x86
+#
+#
+# And/or ops (&&,||) may also be used to make complex conditionals.
+#
+# TEST_START IF (DEFINED ALL_TESTS || ${MYTEST} == boottest) && ${MACHINE} == gandalf
+#
+# Notice the use of paranthesis. Without any paranthesis the above would be
+# processed the same as:
+#
+# TEST_START IF DEFINED ALL_TESTS || (${MYTEST} == boottest && ${MACHINE} == gandalf)
+#
+#
+#
+# INCLUDE file
+#
+# The INCLUDE keyword may be used in DEFAULT sections. This will
+# read another config file and process that file as well. The included
+# file can include other files, add new test cases or default
+# statements. Config variables will be passed to these files and changes
+# to config variables will be seen by top level config files. Including
+# a file is processed just like the contents of the file was cut and pasted
+# into the top level file, except, that include files that end with
+# TEST_START sections will have that section ended at the end of
+# the include file. That is, an included file is included followed
+# by another DEFAULT keyword.
+#
+# Unlike other files referenced in this config, the file path does not need
+# to be absolute. If the file does not start with '/', then the directory
+# that the current config file was located in is used. If no config by the
+# given name is found there, then the current directory is searched.
+#
+# INCLUDE myfile
+# DEFAULT
+#
+# is the same as:
+#
+# INCLUDE myfile
+#
+# Note, if the include file does not contain a full path, the file is
+# searched first by the location of the original include file, and then
+# by the location that ktest.pl was executed in.
+#
#### Config variables ####
#
# The default test type (default test)
# The test types may be:
-# build - only build the kernel, do nothing else
-# boot - build and boot the kernel
-# test - build, boot and if TEST is set, run the test script
+# build - only build the kernel, do nothing else
+# install - build and install, but do nothing else (does not reboot)
+# boot - build, install, and boot the kernel
+# test - build, boot and if TEST is set, run the test script
# (If TEST is not set, it defaults back to boot)
# bisect - Perform a bisect on the kernel (see BISECT_TYPE below)
# patchcheck - Do a test on a series of commits in git (see PATCHCHECK below)
# or on some systems:
#POST_INSTALL = ssh user@target /sbin/dracut -f /boot/initramfs-test.img $KERNEL_VERSION
+# If for some reason you just want to boot the kernel and you do not
+# want the test to install anything new. For example, you may just want
+# to boot test the same kernel over and over and do not want to go through
+# the hassle of installing anything, you can set this option to 1
+# (default 0)
+#NO_INSTALL = 1
+
# If there is a script that you require to run before the build is done
# you can specify it with PRE_BUILD.
#
# (default "login:")
#SUCCESS_LINE = login:
+# To speed up between reboots, defining a line that the
+# default kernel produces that represents that the default
+# kernel has successfully booted and can be used to pass
+# a new test kernel to it. Otherwise ktest.pl will wait till
+# SLEEP_TIME to continue.
+# (default undefined)
+#REBOOT_SUCCESS_LINE = login:
+
# In case the console constantly fills the screen, having
# a specified time to stop the test after success is recommended.
# (in seconds)
# another test. If a reboot to the reliable kernel happens,
# we wait SLEEP_TIME for the console to stop producing output
# before starting the next test.
+#
+# You can speed up reboot times even more by setting REBOOT_SUCCESS_LINE.
# (default 60)
#SLEEP_TIME = 60
#include <linux/list.h>
#include <linux/kvm_host.h>
+#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/stat.h>
#include <linux/dmar.h>
#include <linux/iommu.h>
#include <linux/intel-iommu.h>
projects / linux-2.6-microblaze.git / commitdiff