Two regression fixes and one boot-loader compatibility fix from Simon Horman.
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: armadillo800eva: enable rw rootfs mount
ARM: shmobile: mackerel: fixup usb module order
ARM: shmobile: armadillo800eva: fixup: sound card detection order
biodoc.txt
- Notes on the Generic Block Layer Rewrite in Linux 2.5
capability.txt
- - Generic Block Device Capability (/sys/block/<disk>/capability)
+ - Generic Block Device Capability (/sys/block/<device>/capability)
+cfq-iosched.txt
+ - CFQ IO scheduler tunables
+data-integrity.txt
+ - Block data integrity
deadline-iosched.txt
- Deadline IO scheduler tunables
ioprio.txt
- Block io priorities (in CFQ scheduler)
+queue-sysfs.txt
+ - Queue's sysfs entries
request.txt
- The members of struct request (in include/linux/blkdev.h)
stat.txt
- - Block layer statistics in /sys/block/<dev>/stat
+ - Block layer statistics in /sys/block/<device>/stat
switching-sched.txt
- Switching I/O schedulers at runtime
writeback_cache_control.txt
+CFQ (Complete Fairness Queueing)
+===============================
+
+The main aim of CFQ scheduler is to provide a fair allocation of the disk
+I/O bandwidth for all the processes which requests an I/O operation.
+
+CFQ maintains the per process queue for the processes which request I/O
+operation(syncronous requests). In case of asynchronous requests, all the
+requests from all the processes are batched together according to their
+process's I/O priority.
+
CFQ ioscheduler tunables
========================
controller or for storage arrays), setting slice_idle=0 might end up in better
throughput and acceptable latencies.
+back_seek_max
+-------------
+This specifies, given in Kbytes, the maximum "distance" for backward seeking.
+The distance is the amount of space from the current head location to the
+sectors that are backward in terms of distance.
+
+This parameter allows the scheduler to anticipate requests in the "backward"
+direction and consider them as being the "next" if they are within this
+distance from the current head location.
+
+back_seek_penalty
+-----------------
+This parameter is used to compute the cost of backward seeking. If the
+backward distance of request is just 1/back_seek_penalty from a "front"
+request, then the seeking cost of two requests is considered equivalent.
+
+So scheduler will not bias toward one or the other request (otherwise scheduler
+will bias toward front request). Default value of back_seek_penalty is 2.
+
+fifo_expire_async
+-----------------
+This parameter is used to set the timeout of asynchronous requests. Default
+value of this is 248ms.
+
+fifo_expire_sync
+----------------
+This parameter is used to set the timeout of synchronous requests. Default
+value of this is 124ms. In case to favor synchronous requests over asynchronous
+one, this value should be decreased relative to fifo_expire_async.
+
+slice_async
+-----------
+This parameter is same as of slice_sync but for asynchronous queue. The
+default value is 40ms.
+
+slice_async_rq
+--------------
+This parameter is used to limit the dispatching of asynchronous request to
+device request queue in queue's slice time. The maximum number of request that
+are allowed to be dispatched also depends upon the io priority. Default value
+for this is 2.
+
+slice_sync
+----------
+When a queue is selected for execution, the queues IO requests are only
+executed for a certain amount of time(time_slice) before switching to another
+queue. This parameter is used to calculate the time slice of synchronous
+queue.
+
+time_slice is computed using the below equation:-
+time_slice = slice_sync + (slice_sync/5 * (4 - prio)). To increase the
+time_slice of synchronous queue, increase the value of slice_sync. Default
+value is 100ms.
+
+quantum
+-------
+This specifies the number of request dispatched to the device queue. In a
+queue's time slice, a request will not be dispatched if the number of request
+in the device exceeds this parameter. This parameter is used for synchronous
+request.
+
+In case of storage with several disk, this setting can limit the parallel
+processing of request. Therefore, increasing the value can imporve the
+performace although this can cause the latency of some I/O to increase due
+to more number of requests.
+
CFQ IOPS Mode for group scheduling
===================================
Basic CFQ design is to provide priority based time slices. Higher priority
Files denoted with a RO postfix are readonly and the RW postfix means
read-write.
+add_random (RW)
+----------------
+This file allows to trun off the disk entropy contribution. Default
+value of this file is '1'(on).
+
+discard_granularity (RO)
+-----------------------
+This shows the size of internal allocation of the device in bytes, if
+reported by the device. A value of '0' means device does not support
+the discard functionality.
+
+discard_max_bytes (RO)
+----------------------
+Devices that support discard functionality may have internal limits on
+the number of bytes that can be trimmed or unmapped in a single operation.
+The discard_max_bytes parameter is set by the device driver to the maximum
+number of bytes that can be discarded in a single operation. Discard
+requests issued to the device must not exceed this limit. A discard_max_bytes
+value of 0 means that the device does not support discard functionality.
+
+discard_zeroes_data (RO)
+------------------------
+When read, this file will show if the discarded block are zeroed by the
+device or not. If its value is '1' the blocks are zeroed otherwise not.
+
hw_sector_size (RO)
-------------------
This is the hardware sector size of the device, in bytes.
+iostats (RW)
+-------------
+This file is used to control (on/off) the iostats accounting of the
+disk.
+
+logical_block_size (RO)
+-----------------------
+This is the logcal block size of the device, in bytes.
+
max_hw_sectors_kb (RO)
----------------------
This is the maximum number of kilobytes supported in a single data transfer.
+max_integrity_segments (RO)
+---------------------------
+When read, this file shows the max limit of integrity segments as
+set by block layer which a hardware controller can handle.
+
max_sectors_kb (RW)
-------------------
This is the maximum number of kilobytes that the block layer will allow
for a filesystem request. Must be smaller than or equal to the maximum
size allowed by the hardware.
+max_segments (RO)
+-----------------
+Maximum number of segments of the device.
+
+max_segment_size (RO)
+---------------------
+Maximum segment size of the device.
+
+minimum_io_size (RO)
+--------------------
+This is the smallest preferred io size reported by the device.
+
nomerges (RW)
-------------
This enables the user to disable the lookup logic involved with IO
each request queue may have upto N request pools, each independently
regulated by nr_requests.
+optimal_io_size (RO)
+--------------------
+This is the optimal io size reported by the device.
+
+physical_block_size (RO)
+------------------------
+This is the physical block size of device, in bytes.
+
read_ahead_kb (RW)
------------------
Maximum number of kilobytes to read-ahead for filesystems on this block
device.
+rotational (RW)
+---------------
+This file is used to stat if the device is of rotational type or
+non-rotational type.
+
rq_affinity (RW)
----------------
If this option is '1', the block layer will migrate request completions to the
- compatible : Should be "fsl,<chip>-esdhc"
Optional properties:
-- fsl,cd-internal : Indicate to use controller internal card detection
-- fsl,wp-internal : Indicate to use controller internal write protection
+- fsl,cd-controller : Indicate to use controller internal card detection
+- fsl,wp-controller : Indicate to use controller internal write protection
Examples:
compatible = "fsl,imx51-esdhc";
reg = <0x70004000 0x4000>;
interrupts = <1>;
- fsl,cd-internal;
- fsl,wp-internal;
+ fsl,cd-controller;
+ fsl,wp-controller;
};
esdhc@70008000 {
----------------------------
What: at91-mci driver ("CONFIG_MMC_AT91")
-When: 3.7
+When: 3.8
Why: There are two mci drivers: at91-mci and atmel-mci. The PDC support
was added to atmel-mci as a first step to support more chips.
Then at91-mci was kept only for old IP versions (on at91rm9200 and
config CPU_FREQ_IMX
tristate "CPUfreq driver for i.MX CPUs"
depends on ARCH_MXC && CPU_FREQ
+ select CPU_FREQ_TABLE
help
This enables the CPUfreq driver for i.MX CPUs.
#size-cells = <0>;
ti,hwmods = "i2c3";
};
+
+ wdt2: wdt@44e35000 {
+ compatible = "ti,omap3-wdt";
+ ti,hwmods = "wd_timer2";
+ };
};
};
compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
chosen {
- bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+ bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
};
ahb {
aips@70000000 { /* aips-1 */
spba@70000000 {
esdhc@70004000 { /* ESDHC1 */
- fsl,cd-internal;
- fsl,wp-internal;
+ fsl,cd-controller;
+ fsl,wp-controller;
status = "okay";
};
};
power-blue {
label = "power:blue";
- gpios = <&gpio1 11 0>;
+ gpios = <&gpio1 10 0>;
linux,default-trigger = "timer";
};
+ power-red {
+ label = "power:red";
+ gpios = <&gpio1 11 0>;
+ };
usb1 {
label = "usb1:blue";
gpios = <&gpio1 12 0>;
vcxio: regulator@8 {
compatible = "ti,twl6030-vcxio";
+ regulator-always-on;
};
vusb: regulator@9 {
v1v8: regulator@10 {
compatible = "ti,twl6030-v1v8";
+ regulator-always-on;
};
v2v1: regulator@11 {
compatible = "ti,twl6030-v2v1";
+ regulator-always-on;
};
clk32kg: regulator@12 {
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_LM3530=y
CONFIG_LEDS_LP5521=y
+CONFIG_LEDS_GPIO=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AB8500=y
CONFIG_RTC_DRV_PL031=y
at91_st_read(AT91_ST_SR);
/* Make IRQs happen for the system timer */
- setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq);
+ setup_irq(NR_IRQS_LEGACY + AT91_ID_SYS, &at91rm9200_timer_irq);
/* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used
* directly for the clocksource and all clockevents, after adjusting
.flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_MEM,
+ }, {
+ .flags = IORESOURCE_IRQ,
},
};
* The second resource is needed:
* GPBR will serve as the storage for RTC time offset
*/
- at91sam9260_rtt_device.num_resources = 2;
+ at91sam9260_rtt_device.num_resources = 3;
rtt_resources[1].start = AT91SAM9260_BASE_GPBR +
4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
rtt_resources[1].end = rtt_resources[1].start + 3;
+ rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+ rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
}
#else
static void __init at91_add_device_rtt_rtc(void)
.flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_MEM,
+ }, {
+ .flags = IORESOURCE_IRQ,
}
};
* The second resource is needed:
* GPBR will serve as the storage for RTC time offset
*/
- at91sam9261_rtt_device.num_resources = 2;
+ at91sam9261_rtt_device.num_resources = 3;
rtt_resources[1].start = AT91SAM9261_BASE_GPBR +
4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
rtt_resources[1].end = rtt_resources[1].start + 3;
+ rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+ rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
}
#else
static void __init at91_add_device_rtt_rtc(void)
.flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_MEM,
+ }, {
+ .flags = IORESOURCE_IRQ,
}
};
.flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_MEM,
+ }, {
+ .flags = IORESOURCE_IRQ,
}
};
* The second resource is needed only for the chosen RTT:
* GPBR will serve as the storage for RTC time offset
*/
- at91sam9263_rtt0_device.num_resources = 2;
+ at91sam9263_rtt0_device.num_resources = 3;
at91sam9263_rtt1_device.num_resources = 1;
pdev = &at91sam9263_rtt0_device;
r = rtt0_resources;
break;
case 1:
at91sam9263_rtt0_device.num_resources = 1;
- at91sam9263_rtt1_device.num_resources = 2;
+ at91sam9263_rtt1_device.num_resources = 3;
pdev = &at91sam9263_rtt1_device;
r = rtt1_resources;
break;
pdev->name = "rtc-at91sam9";
r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
r[1].end = r[1].start + 3;
+ r[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+ r[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
}
#else
static void __init at91_add_device_rtt_rtc(void)
.flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_MEM,
+ }, {
+ .flags = IORESOURCE_IRQ,
}
};
* The second resource is needed:
* GPBR will serve as the storage for RTC time offset
*/
- at91sam9g45_rtt_device.num_resources = 2;
+ at91sam9g45_rtt_device.num_resources = 3;
rtt_resources[1].start = AT91SAM9G45_BASE_GPBR +
4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
rtt_resources[1].end = rtt_resources[1].start + 3;
+ rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+ rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
}
#else
static void __init at91_add_device_rtt_rtc(void)
.flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_MEM,
+ }, {
+ .flags = IORESOURCE_IRQ,
}
};
* The second resource is needed:
* GPBR will serve as the storage for RTC time offset
*/
- at91sam9rl_rtt_device.num_resources = 2;
+ at91sam9rl_rtt_device.num_resources = 3;
rtt_resources[1].start = AT91SAM9RL_BASE_GPBR +
4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
rtt_resources[1].end = rtt_resources[1].start + 3;
+ rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+ rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
}
#else
static void __init at91_add_device_rtt_rtc(void)
#define cpu_has_300M_plla() (cpu_is_at91sam9g10())
+#define cpu_has_240M_plla() (cpu_is_at91sam9261() \
+ || cpu_is_at91sam9263() \
+ || cpu_is_at91sam9rl())
+
+#define cpu_has_210M_plla() (cpu_is_at91sam9260())
+
#define cpu_has_pllb() (!(cpu_is_at91sam9rl() \
|| cpu_is_at91sam9g45() \
|| cpu_is_at91sam9x5() \
} else if (cpu_has_800M_plla()) {
if (plla.rate_hz > 800000000)
pll_overclock = true;
+ } else if (cpu_has_240M_plla()) {
+ if (plla.rate_hz > 240000000)
+ pll_overclock = true;
+ } else if (cpu_has_210M_plla()) {
+ if (plla.rate_hz > 210000000)
+ pll_overclock = true;
} else {
if (plla.rate_hz > 209000000)
pll_overclock = true;
void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data)
{
orion_ge00_init(eth_data, DOVE_GE00_PHYS_BASE,
- IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR);
+ IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR,
+ 1600);
}
/*****************************************************************************
#include <plat/backlight.h>
#include <plat/fb.h>
#include <plat/mfc.h>
+#include <plat/hdmi.h>
#include <mach/ohci.h>
#include <mach/map.h>
s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE);
}
+/* I2C module and id for HDMIPHY */
+static struct i2c_board_info hdmiphy_info = {
+ I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38),
+};
+
static void s5p_tv_setup(void)
{
/* Direct HPD to HDMI chip */
s5p_tv_setup();
s5p_i2c_hdmiphy_set_platdata(NULL);
+ s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0);
#ifdef CONFIG_DRM_EXYNOS
s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
#include <plat/mfc.h>
#include <plat/ehci.h>
#include <plat/clock.h>
+#include <plat/hdmi.h>
#include <mach/map.h>
#include <mach/ohci.h>
.pwm_period_ns = 1000,
};
+/* I2C module and id for HDMIPHY */
+static struct i2c_board_info hdmiphy_info = {
+ I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38),
+};
+
static void s5p_tv_setup(void)
{
/* direct HPD to HDMI chip */
s5p_tv_setup();
s5p_i2c_hdmiphy_set_platdata(NULL);
+ s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0);
samsung_keypad_set_platdata(&smdkv310_keypad_data);
obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o
obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o
-obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o
+imx5-pm-$(CONFIG_PM) += pm-imx5.o
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o
obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
clk-pfd.o clk-busy.o
obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
obj-$(CONFIG_HAVE_IMX_SRC) += src.o
-obj-$(CONFIG_CPU_V7) += head-v7.o
-AFLAGS_head-v7.o :=-Wa,-march=armv7-a
-obj-$(CONFIG_SMP) += platsmp.o
+AFLAGS_headsmp.o :=-Wa,-march=armv7-a
+obj-$(CONFIG_SMP) += headsmp.o platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
ifeq ($(CONFIG_PM),y)
-obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o
+obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o
endif
# i.MX5 based machines
ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg,
- ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2,
+ ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
clk_max
};
clk[gpu3d_shader] = imx_clk_divider("gpu3d_shader", "gpu3d_shader_sel", base + 0x18, 29, 3);
clk[ipu1_podf] = imx_clk_divider("ipu1_podf", "ipu1_sel", base + 0x3c, 11, 3);
clk[ipu2_podf] = imx_clk_divider("ipu2_podf", "ipu2_sel", base + 0x3c, 16, 3);
- clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_sel", base + 0x20, 10, 1);
- clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_sel", base + 0x20, 11, 1);
+ clk[ldb_di0_div_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
+ clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1);
+ clk[ldb_di1_div_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
+ clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1);
clk[ipu1_di0_pre] = imx_clk_divider("ipu1_di0_pre", "ipu1_di0_pre_sel", base + 0x34, 3, 3);
clk[ipu1_di1_pre] = imx_clk_divider("ipu1_di1_pre", "ipu1_di1_pre_sel", base + 0x34, 12, 3);
clk[ipu2_di0_pre] = imx_clk_divider("ipu2_di0_pre", "ipu2_di0_pre_sel", base + 0x38, 3, 3);
+++ /dev/null
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/asm-offsets.h>
-#include <asm/hardware/cache-l2x0.h>
-
- .section ".text.head", "ax"
-
-/*
- * The secondary kernel init calls v7_flush_dcache_all before it enables
- * the L1; however, the L1 comes out of reset in an undefined state, so
- * the clean + invalidate performed by v7_flush_dcache_all causes a bunch
- * of cache lines with uninitialized data and uninitialized tags to get
- * written out to memory, which does really unpleasant things to the main
- * processor. We fix this by performing an invalidate, rather than a
- * clean + invalidate, before jumping into the kernel.
- *
- * This funciton is cloned from arch/arm/mach-tegra/headsmp.S, and needs
- * to be called for both secondary cores startup and primary core resume
- * procedures. Ideally, it should be moved into arch/arm/mm/cache-v7.S.
- */
-ENTRY(v7_invalidate_l1)
- mov r0, #0
- mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
- mcr p15, 2, r0, c0, c0, 0
- mrc p15, 1, r0, c0, c0, 0
-
- ldr r1, =0x7fff
- and r2, r1, r0, lsr #13
-
- ldr r1, =0x3ff
-
- and r3, r1, r0, lsr #3 @ NumWays - 1
- add r2, r2, #1 @ NumSets
-
- and r0, r0, #0x7
- add r0, r0, #4 @ SetShift
-
- clz r1, r3 @ WayShift
- add r4, r3, #1 @ NumWays
-1: sub r2, r2, #1 @ NumSets--
- mov r3, r4 @ Temp = NumWays
-2: subs r3, r3, #1 @ Temp--
- mov r5, r3, lsl r1
- mov r6, r2, lsl r0
- orr r5, r5, r6 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
- mcr p15, 0, r5, c7, c6, 2
- bgt 2b
- cmp r2, #0
- bgt 1b
- dsb
- isb
- mov pc, lr
-ENDPROC(v7_invalidate_l1)
-
-#ifdef CONFIG_SMP
-ENTRY(v7_secondary_startup)
- bl v7_invalidate_l1
- b secondary_startup
-ENDPROC(v7_secondary_startup)
-#endif
-
-#ifdef CONFIG_PM
-/*
- * The following code is located into the .data section. This is to
- * allow phys_l2x0_saved_regs to be accessed with a relative load
- * as we are running on physical address here.
- */
- .data
- .align
-
-#ifdef CONFIG_CACHE_L2X0
- .macro pl310_resume
- ldr r2, phys_l2x0_saved_regs
- ldr r0, [r2, #L2X0_R_PHY_BASE] @ get physical base of l2x0
- ldr r1, [r2, #L2X0_R_AUX_CTRL] @ get aux_ctrl value
- str r1, [r0, #L2X0_AUX_CTRL] @ restore aux_ctrl
- mov r1, #0x1
- str r1, [r0, #L2X0_CTRL] @ re-enable L2
- .endm
-
- .globl phys_l2x0_saved_regs
-phys_l2x0_saved_regs:
- .long 0
-#else
- .macro pl310_resume
- .endm
-#endif
-
-ENTRY(v7_cpu_resume)
- bl v7_invalidate_l1
- pl310_resume
- b cpu_resume
-ENDPROC(v7_cpu_resume)
-#endif
--- /dev/null
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/asm-offsets.h>
+#include <asm/hardware/cache-l2x0.h>
+
+ .section ".text.head", "ax"
+
+/*
+ * The secondary kernel init calls v7_flush_dcache_all before it enables
+ * the L1; however, the L1 comes out of reset in an undefined state, so
+ * the clean + invalidate performed by v7_flush_dcache_all causes a bunch
+ * of cache lines with uninitialized data and uninitialized tags to get
+ * written out to memory, which does really unpleasant things to the main
+ * processor. We fix this by performing an invalidate, rather than a
+ * clean + invalidate, before jumping into the kernel.
+ *
+ * This funciton is cloned from arch/arm/mach-tegra/headsmp.S, and needs
+ * to be called for both secondary cores startup and primary core resume
+ * procedures. Ideally, it should be moved into arch/arm/mm/cache-v7.S.
+ */
+ENTRY(v7_invalidate_l1)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mcr p15, 2, r0, c0, c0, 0
+ mrc p15, 1, r0, c0, c0, 0
+
+ ldr r1, =0x7fff
+ and r2, r1, r0, lsr #13
+
+ ldr r1, =0x3ff
+
+ and r3, r1, r0, lsr #3 @ NumWays - 1
+ add r2, r2, #1 @ NumSets
+
+ and r0, r0, #0x7
+ add r0, r0, #4 @ SetShift
+
+ clz r1, r3 @ WayShift
+ add r4, r3, #1 @ NumWays
+1: sub r2, r2, #1 @ NumSets--
+ mov r3, r4 @ Temp = NumWays
+2: subs r3, r3, #1 @ Temp--
+ mov r5, r3, lsl r1
+ mov r6, r2, lsl r0
+ orr r5, r5, r6 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
+ mcr p15, 0, r5, c7, c6, 2
+ bgt 2b
+ cmp r2, #0
+ bgt 1b
+ dsb
+ isb
+ mov pc, lr
+ENDPROC(v7_invalidate_l1)
+
+#ifdef CONFIG_SMP
+ENTRY(v7_secondary_startup)
+ bl v7_invalidate_l1
+ b secondary_startup
+ENDPROC(v7_secondary_startup)
+#endif
+
+#ifdef CONFIG_PM
+/*
+ * The following code is located into the .data section. This is to
+ * allow phys_l2x0_saved_regs to be accessed with a relative load
+ * as we are running on physical address here.
+ */
+ .data
+ .align
+
+#ifdef CONFIG_CACHE_L2X0
+ .macro pl310_resume
+ ldr r2, phys_l2x0_saved_regs
+ ldr r0, [r2, #L2X0_R_PHY_BASE] @ get physical base of l2x0
+ ldr r1, [r2, #L2X0_R_AUX_CTRL] @ get aux_ctrl value
+ str r1, [r0, #L2X0_AUX_CTRL] @ restore aux_ctrl
+ mov r1, #0x1
+ str r1, [r0, #L2X0_CTRL] @ re-enable L2
+ .endm
+
+ .globl phys_l2x0_saved_regs
+phys_l2x0_saved_regs:
+ .long 0
+#else
+ .macro pl310_resume
+ .endm
+#endif
+
+ENTRY(v7_cpu_resume)
+ bl v7_invalidate_l1
+ pl310_resume
+ b cpu_resume
+ENDPROC(v7_cpu_resume)
+#endif
: "cc");
}
-static inline void cpu_leave_lowpower(void)
-{
- unsigned int v;
-
- asm volatile(
- "mrc p15, 0, %0, c1, c0, 0\n"
- " orr %0, %0, %1\n"
- " mcr p15, 0, %0, c1, c0, 0\n"
- " mrc p15, 0, %0, c1, c0, 1\n"
- " orr %0, %0, %2\n"
- " mcr p15, 0, %0, c1, c0, 1\n"
- : "=&r" (v)
- : "Ir" (CR_C), "Ir" (0x40)
- : "cc");
-}
-
/*
* platform-specific code to shutdown a CPU
*
{
cpu_enter_lowpower();
imx_enable_cpu(cpu, false);
- cpu_do_idle();
- cpu_leave_lowpower();
- /* We should never return from idle */
- panic("cpu %d unexpectedly exit from shutdown\n", cpu);
+ /* spin here until hardware takes it down */
+ while (1)
+ ;
}
int platform_cpu_disable(unsigned int cpu)
/* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
static int ksz9021rn_phy_fixup(struct phy_device *phydev)
{
- if (IS_ENABLED(CONFIG_PHYLIB)) {
+ if (IS_BUILTIN(CONFIG_PHYLIB)) {
/* min rx data delay */
phy_write(phydev, 0x0b, 0x8105);
phy_write(phydev, 0x0c, 0x0000);
static void __init imx6q_sabrelite_init(void)
{
- if (IS_ENABLED(CONFIG_PHYLIB))
+ if (IS_BUILTIN(CONFIG_PHYLIB))
phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
ksz9021rn_phy_fixup);
imx6q_sabrelite_cko1_setup();
dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb
dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb
dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb
-dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-qnap-ts219.dtb
+dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6281.dtb
+dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6282.dtb
dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb
dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb
dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb
{
orion_ge00_init(eth_data,
GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM,
- IRQ_KIRKWOOD_GE00_ERR);
+ IRQ_KIRKWOOD_GE00_ERR, 1600);
/* The interface forgets the MAC address assigned by u-boot if
the clock is turned off, so claim the clk now. */
clk_prepare_enable(ge0);
{
orion_ge01_init(eth_data,
GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM,
- IRQ_KIRKWOOD_GE01_ERR);
+ IRQ_KIRKWOOD_GE01_ERR, 1600);
clk_prepare_enable(ge1);
}
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/sizes.h>
#include <linux/platform_device.h>
#include <linux/mtd/partitions.h>
#include <linux/ata_platform.h>
struct resource *res;
int ret = 0;
- if (!pdata && !pdata->pool_name)
+ if (!pdata || !pdata->pool_name)
return -ENODEV;
info = kzalloc(sizeof(*info), GFP_KERNEL);
#define WIN0_OFF(n) (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4))
#define WIN8_OFF(n) (BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4))
-static void __init __iomem *win_cfg_base(int win)
+static void __init __iomem *win_cfg_base(const struct orion_addr_map_cfg *cfg, int win)
{
/*
* Find the control register base address for this window.
{
orion_ge00_init(eth_data,
GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM,
- IRQ_MV78XX0_GE_ERR);
+ IRQ_MV78XX0_GE_ERR,
+ MV643XX_TX_CSUM_DEFAULT_LIMIT);
}
{
orion_ge01_init(eth_data,
GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM,
- NO_IRQ);
+ NO_IRQ,
+ MV643XX_TX_CSUM_DEFAULT_LIMIT);
}
select PM_OPP if PM
select USB_ARCH_HAS_EHCI if USB_SUPPORT
select ARM_CPU_SUSPEND if PM
- select ARCH_NEEDS_CPU_IDLE_COUPLED
+ select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
config SOC_OMAP5
bool "TI OMAP5"
select CPU_V7
select ARM_GIC
select HAVE_SMP
+ select ARM_CPU_SUSPEND if PM
comment "OMAP Core Type"
depends on ARCH_OMAP2
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
+ /* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */
+ OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#endif
#include "hsmmc.h"
#include "common-board-devices.h"
+#define OMAP3_EVM_TS_GPIO 175
#define OMAP3_EVM_EHCI_VBUS 22
#define OMAP3_EVM_EHCI_SELECT 61
.turbo_mode = 0,
};
-/*
- * ADS7846 driver maybe request a gpio according to the value
- * of pdata->get_pendown_state, but we have done this. So set
- * get_pendown_state to avoid twice gpio requesting.
- */
-static int omap3_get_pendown_state(void)
-{
- return !gpio_get_value(OMAP3_EVM_TS_GPIO);
-}
-
static struct ads7846_platform_data ads7846_config = {
.x_max = 0x0fff,
.y_max = 0x0fff,
.debounce_rep = 1,
.gpio_pendown = -EINVAL,
.keep_vref_on = 1,
- .get_pendown_state = &omap3_get_pendown_state,
};
static struct spi_board_info ads7846_spi_board_info __initdata = {
#include "twl-common.h"
#define NAND_BLOCK_SIZE SZ_128K
-#define OMAP3_EVM_TS_GPIO 175
struct mtd_partition;
struct ads7846_platform_data;
for_each_cpu(cpu_id, cpu_online_mask) {
dev = &per_cpu(omap4_idle_dev, cpu_id);
dev->cpu = cpu_id;
+#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
dev->coupled_cpus = *cpu_online_mask;
-
+#endif
cpuidle_register_driver(&omap4_idle_driver);
if (cpuidle_register_device(dev)) {
* @gpio: GPIO number
* @muxnames: available signal modes for a ball
* @balls: available balls on the package
- * @partition: mux partition
*/
struct omap_mux {
u16 reg_offset;
{
int r = -ENODEV;
- if (!cpu_is_omap44xx())
+ if (!cpu_is_omap443x())
return r;
r = omap_init_opp_table(omap44xx_opp_def_list,
per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
- if (mpu_next_state < PWRDM_POWER_ON) {
- pwrdm_pre_transition(mpu_pwrdm);
- pwrdm_pre_transition(neon_pwrdm);
- }
+ pwrdm_pre_transition(NULL);
/* PER */
if (per_next_state < PWRDM_POWER_ON) {
- pwrdm_pre_transition(per_pwrdm);
per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
omap2_gpio_prepare_for_idle(per_going_off);
}
/* CORE */
if (core_next_state < PWRDM_POWER_ON) {
- pwrdm_pre_transition(core_pwrdm);
if (core_next_state == PWRDM_POWER_OFF) {
omap3_core_save_context();
omap3_cm_save_context();
omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
OMAP3430_GR_MOD,
OMAP3_PRM_VOLTCTRL_OFFSET);
- pwrdm_post_transition(core_pwrdm);
}
omap3_intc_resume_idle();
+ pwrdm_post_transition(NULL);
+
/* PER */
- if (per_next_state < PWRDM_POWER_ON) {
+ if (per_next_state < PWRDM_POWER_ON)
omap2_gpio_resume_after_idle();
- pwrdm_post_transition(per_pwrdm);
- }
-
- if (mpu_next_state < PWRDM_POWER_ON) {
- pwrdm_post_transition(mpu_pwrdm);
- pwrdm_post_transition(neon_pwrdm);
- }
}
static void omap3_pm_idle(void)
* The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET.
* It returns to the caller for CPU INACTIVE and ON power states or in case
* CPU failed to transition to targeted OFF/DORMANT state.
+ *
+ * omap4_finish_suspend() calls v7_flush_dcache_all() which doesn't save
+ * stack frame and it expects the caller to take care of it. Hence the entire
+ * stack frame is saved to avoid possible stack corruption.
*/
ENTRY(omap4_finish_suspend)
- stmfd sp!, {lr}
+ stmfd sp!, {r4-r12, lr}
cmp r0, #0x0
beq do_WFI @ No lowpower state, jump to WFI
skip_scu_gp_clear:
isb
dsb
- ldmfd sp!, {pc}
+ ldmfd sp!, {r4-r12, pc}
ENDPROC(omap4_finish_suspend)
/*
const char *pmic_type, int pmic_irq,
struct twl4030_platform_data *pmic_data)
{
+ omap_mux_init_signal("sys_nirq", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
strncpy(pmic_i2c_board_info.type, pmic_type,
sizeof(pmic_i2c_board_info.type));
pmic_i2c_board_info.irq = pmic_irq;
{
orion_ge00_init(eth_data,
ORION5X_ETH_PHYS_BASE, IRQ_ORION5X_ETH_SUM,
- IRQ_ORION5X_ETH_ERR);
+ IRQ_ORION5X_ETH_ERR,
+ MV643XX_TX_CSUM_DEFAULT_LIMIT);
}
*/
enum dma_ch {
- DMACH_XD0,
+ DMACH_DT_PROP = -1, /* not yet supported, do not use */
+ DMACH_XD0 = 0,
DMACH_XD1,
DMACH_SDI,
DMACH_SPI0,
};
/* GPIO KEY */
-#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
+#define GPIO_KEY(c, g, d, ...) \
+ { .code = c, .gpio = g, .desc = d, .active_low = 1, __VA_ARGS__ }
static struct gpio_keys_button gpio_buttons[] = {
- GPIO_KEY(KEY_POWER, GPIO_PORT99, "SW1"),
- GPIO_KEY(KEY_BACK, GPIO_PORT100, "SW2"),
- GPIO_KEY(KEY_MENU, GPIO_PORT97, "SW3"),
- GPIO_KEY(KEY_HOME, GPIO_PORT98, "SW4"),
+ GPIO_KEY(KEY_POWER, GPIO_PORT99, "SW3", .wakeup = 1),
+ GPIO_KEY(KEY_BACK, GPIO_PORT100, "SW4"),
+ GPIO_KEY(KEY_MENU, GPIO_PORT97, "SW5"),
+ GPIO_KEY(KEY_HOME, GPIO_PORT98, "SW6"),
};
static struct gpio_keys_platform_data gpio_key_info = {
return 0; /* always allow wakeup */
}
-#define RELOC_BASE 0x1000
+#define RELOC_BASE 0x1200
-/* INTCA IRQ pins at INTCS + 0x1000 to make space for GIC+INTC handling */
+/* INTCA IRQ pins at INTCS + RELOC_BASE to make space for GIC+INTC handling */
#define INTCS_VECT_RELOC(n, vect) INTCS_VECT((n), (vect) + RELOC_BASE)
INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000,
config MACH_SNOWBALL
bool "U8500 Snowball platform"
select MACH_MOP500
- select LEDS_GPIO
help
Include support for the snowball development platform.
return pdev;
}
-/* Platform device for ASoC U8500 machine */
-static struct platform_device snd_soc_u8500 = {
- .name = "snd-soc-u8500",
+/* Platform device for ASoC MOP500 machine */
+static struct platform_device snd_soc_mop500 = {
+ .name = "snd-soc-mop500",
.id = 0,
.dev = {
.platform_data = NULL,
{
struct platform_device *msp1;
- pr_info("%s: Register platform-device 'snd-soc-u8500'.\n", __func__);
- platform_device_register(&snd_soc_u8500);
+ pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__);
+ platform_device_register(&snd_soc_mop500);
pr_info("Initialize MSP I2S-devices.\n");
db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0,
ARRAY_SIZE(mop500_platform_devs));
mop500_sdi_init(parent);
+ mop500_msp_init(parent);
i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
i2c_register_board_info(2, mop500_i2c2_devices,
mop500_uib_init();
+ } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
+ mop500_msp_init(parent);
} else if (of_machine_is_compatible("st-ericsson,hrefv60+")) {
/*
* The HREFv60 board removed a GPIO expander and routed
ARRAY_SIZE(mop500_platform_devs));
hrefv60_sdi_init(parent);
+ mop500_msp_init(parent);
i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
timer->reserved = 1;
break;
}
+ spin_unlock_irqrestore(&dm_timer_lock, flags);
if (timer) {
ret = omap_dm_timer_prepare(timer);
timer = NULL;
}
}
- spin_unlock_irqrestore(&dm_timer_lock, flags);
if (!timer)
pr_debug("%s: timer request failed!\n", __func__);
break;
}
}
+ spin_unlock_irqrestore(&dm_timer_lock, flags);
if (timer) {
ret = omap_dm_timer_prepare(timer);
timer = NULL;
}
}
- spin_unlock_irqrestore(&dm_timer_lock, flags);
if (!timer)
pr_debug("%s: timer%d request failed!\n", __func__, id);
void omap_dm_timer_disable(struct omap_dm_timer *timer)
{
- pm_runtime_put(&timer->pdev->dev);
+ pm_runtime_put_sync(&timer->pdev->dev);
}
EXPORT_SYMBOL_GPL(omap_dm_timer_disable);
#define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \
cpu_is_omap16xx())
#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \
- cpu_is_omap44xx() || soc_is_omap54xx())
+ cpu_is_omap44xx() || soc_is_omap54xx() || \
+ soc_is_am33xx())
/* Various silicon revisions for omap2 */
#define OMAP242X_CLASS 0x24200024
# endif
#endif
+#ifdef CONFIG_SOC_AM33XX
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME am33xx
+# endif
+#endif
+
#endif /* __PLAT_OMAP_MULTI_H */
_DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \
AM33XXUART##p)
-static inline void __arch_decomp_setup(unsigned long arch_id)
+static inline void arch_decomp_setup(void)
{
int port = 0;
} while (0);
}
-#define arch_decomp_setup() __arch_decomp_setup(arch_id)
-
/*
* nothing to do
*/
void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
unsigned long mapbase,
unsigned long irq,
- unsigned long irq_err)
+ unsigned long irq_err,
+ unsigned int tx_csum_limit)
{
fill_resources(&orion_ge00_shared, orion_ge00_shared_resources,
mapbase + 0x2000, SZ_16K - 1, irq_err);
+ orion_ge00_shared_data.tx_csum_limit = tx_csum_limit;
ge_complete(&orion_ge00_shared_data,
orion_ge00_resources, irq, &orion_ge00_shared,
eth_data, &orion_ge00);
void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
unsigned long mapbase,
unsigned long irq,
- unsigned long irq_err)
+ unsigned long irq_err,
+ unsigned int tx_csum_limit)
{
fill_resources(&orion_ge01_shared, orion_ge01_shared_resources,
mapbase + 0x2000, SZ_16K - 1, irq_err);
+ orion_ge01_shared_data.tx_csum_limit = tx_csum_limit;
ge_complete(&orion_ge01_shared_data,
orion_ge01_resources, irq, &orion_ge01_shared,
eth_data, &orion_ge01);
void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
unsigned long mapbase,
unsigned long irq,
- unsigned long irq_err);
+ unsigned long irq_err,
+ unsigned int tx_csum_limit);
void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
unsigned long mapbase,
unsigned long irq,
- unsigned long irq_err);
+ unsigned long irq_err,
+ unsigned int tx_csum_limit);
void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data,
unsigned long mapbase,
* when necessary.
*/
-int s3c2410_dma_enqueue(unsigned int channel, void *id,
+int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
dma_addr_t data, int size)
{
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
#include <linux/platform_data/s3c-hsudc.h>
#include <linux/platform_data/s3c-hsotg.h>
+#include <media/s5p_hdmi.h>
+
#include <asm/irq.h>
#include <asm/pmu.h>
#include <asm/mach/arch.h>
if (!pd) {
pd = &default_i2c_data;
- if (soc_is_exynos4210())
+ if (soc_is_exynos4210() ||
+ soc_is_exynos4212() || soc_is_exynos4412())
pd->bus_num = 8;
else if (soc_is_s5pv210())
pd->bus_num = 3;
npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
&s5p_device_i2c_hdmiphy);
}
+
+struct s5p_hdmi_platform_data s5p_hdmi_def_platdata;
+
+void __init s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info,
+ struct i2c_board_info *mhl_info, int mhl_bus)
+{
+ struct s5p_hdmi_platform_data *pd = &s5p_hdmi_def_platdata;
+
+ if (soc_is_exynos4210() ||
+ soc_is_exynos4212() || soc_is_exynos4412())
+ pd->hdmiphy_bus = 8;
+ else if (soc_is_s5pv210())
+ pd->hdmiphy_bus = 3;
+ else
+ pd->hdmiphy_bus = 0;
+
+ pd->hdmiphy_info = hdmiphy_info;
+ pd->mhl_info = mhl_info;
+ pd->mhl_bus = mhl_bus;
+
+ s3c_set_platdata(pd, sizeof(struct s5p_hdmi_platform_data),
+ &s5p_device_hdmi);
+}
+
#endif /* CONFIG_S5P_DEV_I2C_HDMIPHY */
/* I2S */
--- /dev/null
+/*
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PLAT_SAMSUNG_HDMI_H
+#define __PLAT_SAMSUNG_HDMI_H __FILE__
+
+extern void s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info,
+ struct i2c_board_info *mhl_info, int mhl_bus);
+
+#endif /* __PLAT_SAMSUNG_HDMI_H */
#ifdef CONFIG_SAMSUNG_PM_DEBUG
-struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
+static struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
{
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
+ select HAVE_CLK
select IRQ_CPU
select MIPS_MACHINE
select SYS_HAS_CPU_MIPS32_R2
* adapter on the mtx-1 "singleboard" variant. It triggers a custom
* logic chip connected to EXT_IO3 (GPIO1) to suppress IDSEL signals.
*/
+ udelay(1);
+
if (assert && devsel != 0)
/* Suppress signal to Cardbus */
alchemy_gpio_set_value(1, 0); /* set EXT_IO3 OFF */
ath79_ohci_resources[0].start = AR7240_OHCI_BASE;
ath79_ohci_resources[0].end = AR7240_OHCI_BASE + AR7240_OHCI_SIZE - 1;
+ ath79_ohci_resources[1].start = ATH79_CPU_IRQ_USB;
+ ath79_ohci_resources[1].end = ATH79_CPU_IRQ_USB;
platform_device_register(&ath79_ohci_device);
}
if (soc_is_ar71xx())
ath79_gpio_count = AR71XX_GPIO_COUNT;
- else if (soc_is_ar724x())
- ath79_gpio_count = AR724X_GPIO_COUNT;
+ else if (soc_is_ar7240())
+ ath79_gpio_count = AR7240_GPIO_COUNT;
+ else if (soc_is_ar7241() || soc_is_ar7242())
+ ath79_gpio_count = AR7241_GPIO_COUNT;
else if (soc_is_ar913x())
ath79_gpio_count = AR913X_GPIO_COUNT;
else if (soc_is_ar933x())
if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) {
spi_resources[0].end += BCM_6338_RSET_SPI_SIZE - 1;
spi_pdata.fifo_size = SPI_6338_MSG_DATA_SIZE;
+ spi_pdata.msg_type_shift = SPI_6338_MSG_TYPE_SHIFT;
+ spi_pdata.msg_ctl_width = SPI_6338_MSG_CTL_WIDTH;
}
if (BCMCPU_IS_6358() || BCMCPU_IS_6368()) {
spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1;
spi_pdata.fifo_size = SPI_6358_MSG_DATA_SIZE;
+ spi_pdata.msg_type_shift = SPI_6358_MSG_TYPE_SHIFT;
+ spi_pdata.msg_ctl_width = SPI_6358_MSG_CTL_WIDTH;
}
bcm63xx_spi_regs_init();
octeon_irq_ciu_to_irq[line][bit] = irq;
}
+static void octeon_irq_force_ciu_mapping(struct irq_domain *domain,
+ int irq, int line, int bit)
+{
+ irq_domain_associate(domain, irq, line << 6 | bit);
+}
+
static int octeon_coreid_for_cpu(int cpu)
{
#ifdef CONFIG_SMP
mutex_init(&cd->core_irq_mutex);
irq = OCTEON_IRQ_SW0 + i;
- switch (irq) {
- case OCTEON_IRQ_TIMER:
- case OCTEON_IRQ_SW0:
- case OCTEON_IRQ_SW1:
- case OCTEON_IRQ_5:
- case OCTEON_IRQ_PERF:
- irq_set_chip_data(irq, cd);
- irq_set_chip_and_handler(irq, &octeon_irq_chip_core,
- handle_percpu_irq);
- break;
- default:
- break;
- }
+ irq_set_chip_data(irq, cd);
+ irq_set_chip_and_handler(irq, &octeon_irq_chip_core,
+ handle_percpu_irq);
}
}
unsigned int type;
unsigned int pin;
unsigned int trigger;
- struct octeon_irq_gpio_domain_data *gpiod;
if (d->of_node != node)
return -EINVAL;
break;
}
*out_type = type;
- gpiod = d->host_data;
- *out_hwirq = gpiod->base_hwirq + pin;
+ *out_hwirq = pin;
return 0;
}
static int octeon_irq_gpio_map(struct irq_domain *d,
unsigned int virq, irq_hw_number_t hw)
{
- unsigned int line = hw >> 6;
- unsigned int bit = hw & 63;
+ struct octeon_irq_gpio_domain_data *gpiod = d->host_data;
+ unsigned int line, bit;
if (!octeon_irq_virq_in_range(virq))
return -EINVAL;
+ hw += gpiod->base_hwirq;
+ line = hw >> 6;
+ bit = hw & 63;
if (line > 1 || octeon_irq_ciu_to_irq[line][bit] != 0)
return -EINVAL;
octeon_irq_set_ciu_mapping(virq, line, bit,
octeon_irq_gpio_chip,
octeon_irq_handle_gpio);
-
return 0;
}
struct irq_chip *chip_wd;
struct device_node *gpio_node;
struct device_node *ciu_node;
+ struct irq_domain *ciu_domain = NULL;
octeon_irq_init_ciu_percpu();
octeon_irq_setup_secondary = octeon_irq_setup_secondary_ciu;
/* Mips internal */
octeon_irq_init_core();
- /* CIU_0 */
- for (i = 0; i < 16; i++)
- octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_WORKQ0, 0, i + 0, chip, handle_level_irq);
-
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX0, 0, 32, chip_mbox, handle_percpu_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX1, 0, 33, chip_mbox, handle_percpu_irq);
-
- for (i = 0; i < 4; i++)
- octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_PCI_INT0, 0, i + 36, chip, handle_level_irq);
- for (i = 0; i < 4; i++)
- octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_PCI_MSI0, 0, i + 40, chip, handle_level_irq);
-
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_RML, 0, 46, chip, handle_level_irq);
- for (i = 0; i < 4; i++)
- octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_TIMER0, 0, i + 52, chip, handle_edge_irq);
-
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_USB0, 0, 56, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_BOOTDMA, 0, 63, chip, handle_level_irq);
-
- /* CIU_1 */
- for (i = 0; i < 16; i++)
- octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_WDOG0, 1, i + 0, chip_wd, handle_level_irq);
-
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_USB1, 1, 17, chip, handle_level_irq);
-
gpio_node = of_find_compatible_node(NULL, NULL, "cavium,octeon-3860-gpio");
if (gpio_node) {
struct octeon_irq_gpio_domain_data *gpiod;
ciu_node = of_find_compatible_node(NULL, NULL, "cavium,octeon-3860-ciu");
if (ciu_node) {
- irq_domain_add_tree(ciu_node, &octeon_irq_domain_ciu_ops, NULL);
+ ciu_domain = irq_domain_add_tree(ciu_node, &octeon_irq_domain_ciu_ops, NULL);
of_node_put(ciu_node);
} else
- pr_warn("Cannot find device node for cavium,octeon-3860-ciu.\n");
+ panic("Cannot find device node for cavium,octeon-3860-ciu.");
+
+ /* CIU_0 */
+ for (i = 0; i < 16; i++)
+ octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_WORKQ0, 0, i + 0);
+
+ octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX0, 0, 32, chip_mbox, handle_percpu_irq);
+ octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX1, 0, 33, chip_mbox, handle_percpu_irq);
+
+ for (i = 0; i < 4; i++)
+ octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_PCI_INT0, 0, i + 36);
+ for (i = 0; i < 4; i++)
+ octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_PCI_MSI0, 0, i + 40);
+
+ octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_RML, 0, 46);
+ for (i = 0; i < 4; i++)
+ octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_TIMER0, 0, i + 52);
+
+ octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_USB0, 0, 56);
+ octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_BOOTDMA, 0, 63);
+
+ /* CIU_1 */
+ for (i = 0; i < 16; i++)
+ octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_WDOG0, 1, i + 0, chip_wd, handle_level_irq);
+
+ octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_USB1, 1, 17);
/* Enable the CIU lines */
set_c0_status(STATUSF_IP3 | STATUSF_IP2);
#define AR71XX_GPIO_REG_FUNC 0x28
#define AR71XX_GPIO_COUNT 16
-#define AR724X_GPIO_COUNT 18
+#define AR7240_GPIO_COUNT 18
+#define AR7241_GPIO_COUNT 20
#define AR913X_GPIO_COUNT 22
#define AR933X_GPIO_COUNT 30
#define AR934X_GPIO_COUNT 23
#define cpu_has_mips64r1 0
#define cpu_has_mips64r2 0
-#define cpu_has_dsp 0
#define cpu_has_mipsmt 0
#define cpu_has_64bits 0
struct bcm63xx_spi_pdata {
unsigned int fifo_size;
+ unsigned int msg_type_shift;
+ unsigned int msg_ctl_width;
int bus_num;
int num_chipselect;
u32 speed_hz;
#define SPI_6338_FILL_BYTE 0x07
#define SPI_6338_MSG_TAIL 0x09
#define SPI_6338_RX_TAIL 0x0b
-#define SPI_6338_MSG_CTL 0x40
+#define SPI_6338_MSG_CTL 0x40 /* 8-bits register */
+#define SPI_6338_MSG_CTL_WIDTH 8
#define SPI_6338_MSG_DATA 0x41
#define SPI_6338_MSG_DATA_SIZE 0x3f
#define SPI_6338_RX_DATA 0x80
#define SPI_6348_FILL_BYTE 0x07
#define SPI_6348_MSG_TAIL 0x09
#define SPI_6348_RX_TAIL 0x0b
-#define SPI_6348_MSG_CTL 0x40
+#define SPI_6348_MSG_CTL 0x40 /* 8-bits register */
+#define SPI_6348_MSG_CTL_WIDTH 8
#define SPI_6348_MSG_DATA 0x41
#define SPI_6348_MSG_DATA_SIZE 0x3f
#define SPI_6348_RX_DATA 0x80
/* BCM 6358 SPI core */
#define SPI_6358_MSG_CTL 0x00 /* 16-bits register */
+#define SPI_6358_MSG_CTL_WIDTH 16
#define SPI_6358_MSG_DATA 0x02
#define SPI_6358_MSG_DATA_SIZE 0x21e
#define SPI_6358_RX_DATA 0x400
/* BCM 6358 SPI core */
#define SPI_6368_MSG_CTL 0x00 /* 16-bits register */
+#define SPI_6368_MSG_CTL_WIDTH 16
#define SPI_6368_MSG_DATA 0x02
#define SPI_6368_MSG_DATA_SIZE 0x21e
#define SPI_6368_RX_DATA 0x400
#define SPI_HD_W 0x01
#define SPI_HD_R 0x02
#define SPI_BYTE_CNT_SHIFT 0
-#define SPI_MSG_TYPE_SHIFT 14
+#define SPI_6338_MSG_TYPE_SHIFT 6
+#define SPI_6348_MSG_TYPE_SHIFT 6
+#define SPI_6358_MSG_TYPE_SHIFT 14
+#define SPI_6368_MSG_TYPE_SHIFT 14
/* Command */
#define SPI_CMD_NOOP 0x00
OCTEON_IRQ_TIMER,
/* sources in CIU_INTX_EN0 */
OCTEON_IRQ_WORKQ0,
- OCTEON_IRQ_GPIO0 = OCTEON_IRQ_WORKQ0 + 16,
- OCTEON_IRQ_WDOG0 = OCTEON_IRQ_GPIO0 + 16,
+ OCTEON_IRQ_WDOG0 = OCTEON_IRQ_WORKQ0 + 16,
OCTEON_IRQ_WDOG15 = OCTEON_IRQ_WDOG0 + 15,
OCTEON_IRQ_MBOX0 = OCTEON_IRQ_WDOG0 + 16,
OCTEON_IRQ_MBOX1,
- OCTEON_IRQ_UART0,
- OCTEON_IRQ_UART1,
- OCTEON_IRQ_UART2,
OCTEON_IRQ_PCI_INT0,
OCTEON_IRQ_PCI_INT1,
OCTEON_IRQ_PCI_INT2,
OCTEON_IRQ_PCI_MSI2,
OCTEON_IRQ_PCI_MSI3,
- OCTEON_IRQ_TWSI,
- OCTEON_IRQ_TWSI2,
OCTEON_IRQ_RML,
OCTEON_IRQ_TIMER0,
OCTEON_IRQ_TIMER1,
OCTEON_IRQ_TIMER3,
OCTEON_IRQ_USB0,
OCTEON_IRQ_USB1,
- OCTEON_IRQ_MII0,
- OCTEON_IRQ_MII1,
OCTEON_IRQ_BOOTDMA,
#ifndef CONFIG_PCI_MSI
OCTEON_IRQ_LAST = 127
struct list_head dbe_list;
const struct exception_table_entry *dbe_start;
const struct exception_table_entry *dbe_end;
+ struct mips_hi16 *r_mips_hi16_list;
};
typedef uint8_t Elf64_Byte; /* Type for a 8-bit quantity. */
#ifdef CONFIG_SYNC_R4K
-extern void synchronise_count_master(void);
-extern void synchronise_count_slave(void);
+extern void synchronise_count_master(int cpu);
+extern void synchronise_count_slave(int cpu);
#else
-static inline void synchronise_count_master(void)
+static inline void synchronise_count_master(int cpu)
{
}
-static inline void synchronise_count_slave(void)
+static inline void synchronise_count_slave(int cpu)
{
}
Elf_Addr value;
};
-static struct mips_hi16 *mips_hi16_list;
-
static LIST_HEAD(dbe_list);
static DEFINE_SPINLOCK(dbe_lock);
n->addr = (Elf_Addr *)location;
n->value = v;
- n->next = mips_hi16_list;
- mips_hi16_list = n;
+ n->next = me->arch.r_mips_hi16_list;
+ me->arch.r_mips_hi16_list = n;
return 0;
}
return 0;
}
+static void free_relocation_chain(struct mips_hi16 *l)
+{
+ struct mips_hi16 *next;
+
+ while (l) {
+ next = l->next;
+ kfree(l);
+ l = next;
+ }
+}
+
static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v)
{
unsigned long insnlo = *location;
+ struct mips_hi16 *l;
Elf_Addr val, vallo;
/* Sign extend the addend we extract from the lo insn. */
vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
- if (mips_hi16_list != NULL) {
- struct mips_hi16 *l;
-
- l = mips_hi16_list;
+ if (me->arch.r_mips_hi16_list != NULL) {
+ l = me->arch.r_mips_hi16_list;
while (l != NULL) {
struct mips_hi16 *next;
unsigned long insn;
l = next;
}
- mips_hi16_list = NULL;
+ me->arch.r_mips_hi16_list = NULL;
}
/*
return 0;
out_danger:
+ free_relocation_chain(l);
+ me->arch.r_mips_hi16_list = NULL;
+
pr_err("module %s: dangerous R_MIPS_LO16 REL relocation\n", me->name);
return -ENOEXEC;
pr_debug("Applying relocate section %u to %u\n", relsec,
sechdrs[relsec].sh_info);
+ me->arch.r_mips_hi16_list = NULL;
for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
/* This is where to make the change */
location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
return res;
}
+ /*
+ * Normally the hi16 list should be deallocated at this point. A
+ * malformed binary however could contain a series of R_MIPS_HI16
+ * relocations not followed by a R_MIPS_LO16 relocation. In that
+ * case, free up the list and return an error.
+ */
+ if (me->arch.r_mips_hi16_list) {
+ free_relocation_chain(me->arch.r_mips_hi16_list);
+ me->arch.r_mips_hi16_list = NULL;
+
+ return -ENOEXEC;
+ }
+
return 0;
}
cpu_set(cpu, cpu_callin_map);
- synchronise_count_slave();
+ synchronise_count_slave(cpu);
/*
* irq will be enabled in ->smp_finish(), enabling it too early
void __init smp_cpus_done(unsigned int max_cpus)
{
mp_ops->cpus_done();
- synchronise_count_master();
}
/* called from main before smp_init() */
while (!cpu_isset(cpu, cpu_callin_map))
udelay(100);
+ synchronise_count_master(cpu);
return 0;
}
#define COUNTON 100
#define NR_LOOPS 5
-void __cpuinit synchronise_count_master(void)
+void __cpuinit synchronise_count_master(int cpu)
{
int i;
unsigned long flags;
unsigned int initcount;
- int nslaves;
#ifdef CONFIG_MIPS_MT_SMTC
/*
return;
#endif
- printk(KERN_INFO "Synchronize counters across %u CPUs: ",
- num_online_cpus());
+ printk(KERN_INFO "Synchronize counters for CPU %u: ", cpu);
local_irq_save(flags);
* Notify the slaves that it's time to start
*/
atomic_set(&count_reference, read_c0_count());
- atomic_set(&count_start_flag, 1);
+ atomic_set(&count_start_flag, cpu);
smp_wmb();
/* Count will be initialised to current timer for all CPU's */
* two CPUs.
*/
- nslaves = num_online_cpus()-1;
for (i = 0; i < NR_LOOPS; i++) {
- /* slaves loop on '!= ncpus' */
- while (atomic_read(&count_count_start) != nslaves)
+ /* slaves loop on '!= 2' */
+ while (atomic_read(&count_count_start) != 1)
mb();
atomic_set(&count_count_stop, 0);
smp_wmb();
/*
* Wait for all slaves to leave the synchronization point:
*/
- while (atomic_read(&count_count_stop) != nslaves)
+ while (atomic_read(&count_count_stop) != 1)
mb();
atomic_set(&count_count_start, 0);
smp_wmb();
}
/* Arrange for an interrupt in a short while */
write_c0_compare(read_c0_count() + COUNTON);
+ atomic_set(&count_start_flag, 0);
local_irq_restore(flags);
printk("done.\n");
}
-void __cpuinit synchronise_count_slave(void)
+void __cpuinit synchronise_count_slave(int cpu)
{
int i;
unsigned int initcount;
- int ncpus;
#ifdef CONFIG_MIPS_MT_SMTC
/*
* so we first wait for the master to say everyone is ready
*/
- while (!atomic_read(&count_start_flag))
+ while (atomic_read(&count_start_flag) != cpu)
mb();
/* Count will be initialised to next expire for all CPU's */
initcount = atomic_read(&count_reference);
- ncpus = num_online_cpus();
for (i = 0; i < NR_LOOPS; i++) {
atomic_inc(&count_count_start);
- while (atomic_read(&count_count_start) != ncpus)
+ while (atomic_read(&count_count_start) != 2)
mb();
/*
write_c0_count(initcount);
atomic_inc(&count_count_stop);
- while (atomic_read(&count_count_stop) != ncpus)
+ while (atomic_read(&count_count_stop) != 2)
mb();
}
/* Arrange for an interrupt in a short while */
register_pci_controller(controller);
}
-
-/* Enable PCI 2.1 compatibility in PIIX4 */
-static void __devinit quirk_dlcsetup(struct pci_dev *dev)
-{
- u8 odlc, ndlc;
- (void) pci_read_config_byte(dev, 0x82, &odlc);
- /* Enable passive releases and delayed transaction */
- ndlc = odlc | 7;
- (void) pci_write_config_byte(dev, 0x82, ndlc);
-}
-
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0,
- quirk_dlcsetup);
#define AR724X_PCI_MEM_BASE 0x10000000
#define AR724X_PCI_MEM_SIZE 0x08000000
+#define AR724X_PCI_REG_RESET 0x18
#define AR724X_PCI_REG_INT_STATUS 0x4c
#define AR724X_PCI_REG_INT_MASK 0x50
+#define AR724X_PCI_RESET_LINK_UP BIT(0)
+
#define AR724X_PCI_INT_DEV0 BIT(14)
#define AR724X_PCI_IRQ_COUNT 1
static u32 ar724x_pci_bar0_value;
static bool ar724x_pci_bar0_is_cached;
+static bool ar724x_pci_link_up;
+
+static inline bool ar724x_pci_check_link(void)
+{
+ u32 reset;
+
+ reset = __raw_readl(ar724x_pci_ctrl_base + AR724X_PCI_REG_RESET);
+ return reset & AR724X_PCI_RESET_LINK_UP;
+}
static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
int size, uint32_t *value)
void __iomem *base;
u32 data;
+ if (!ar724x_pci_link_up)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
if (devfn)
return PCIBIOS_DEVICE_NOT_FOUND;
u32 data;
int s;
+ if (!ar724x_pci_link_up)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
if (devfn)
return PCIBIOS_DEVICE_NOT_FOUND;
if (ar724x_pci_ctrl_base == NULL)
goto err_unmap_devcfg;
+ ar724x_pci_link_up = ar724x_pci_check_link();
+ if (!ar724x_pci_link_up)
+ pr_warn("ar724x: PCIe link is down\n");
+
ar724x_pci_irq_init(irq);
register_pci_controller(&ar724x_pci_controller);
/include/ "qoriq-duart-1.dtsi"
/include/ "qoriq-gpio-0.dtsi"
/include/ "qoriq-usb2-mph-0.dtsi"
+ usb@210000 {
+ compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+ port0;
+ };
/include/ "qoriq-usb2-dr-0.dtsi"
+ usb@211000 {
+ compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+ };
/include/ "qoriq-sec4.0-0.dtsi"
};
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_AUDIT=y
-CONFIG_SPARSE_IRQ=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_EMBEDDED=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
CONFIG_P1023_RDS=y
CONFIG_QUICC_ENGINE=y
CONFIG_QE_GPIO=y
CONFIG_CPM2=y
-CONFIG_GPIO_MPC8XXX=y
CONFIG_HIGHMEM=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_MISC=m
CONFIG_MATH_EMULATION=y
CONFIG_IPV6=y
CONFIG_IP_SCTP=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_LEGACY=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_SATA_SIL24=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
+CONFIG_FS_ENET=y
+CONFIG_FSL_PQ_MDIO=y
+CONFIG_E1000E=y
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_FIXED_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_FS_ENET=y
-CONFIG_E1000E=y
-CONFIG_FSL_PQ_MDIO=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_QE=m
-CONFIG_HW_RANDOM=y
CONFIG_NVRAM=y
CONFIG_I2C=y
CONFIG_I2C_CPM=m
CONFIG_I2C_MPC=y
+CONFIG_GPIO_MPC8XXX=y
# CONFIG_HWMON is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_SOUND=y
CONFIG_FSL_DMA=y
# CONFIG_NET_DMA is not set
CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
CONFIG_CRC_T10DIF=y
CONFIG_FRAME_WARN=8092
CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_AUDIT=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_RCU_TRACE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
CONFIG_P2041_RDB=y
CONFIG_P3041_DS=y
CONFIG_P4080_DS=y
CONFIG_P5020_DS=y
CONFIG_HIGHMEM=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_MISC=m
CONFIG_KEXEC=y
CONFIG_IRQ_ALL_CPUS=y
CONFIG_FORCE_MAX_ZONEORDER=13
-CONFIG_FSL_LBC=y
CONFIG_PCI=y
CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_MSI=y
# CONFIG_PCIEASPM is not set
+CONFIG_PCI_MSI=y
CONFIG_RAPIDIO=y
CONFIG_FSL_RIO=y
CONFIG_NET=y
CONFIG_IPV6=y
CONFIG_IP_SCTP=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_M25P80=y
CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_IDS=y
-CONFIG_MTD_NAND_FSL_IFC=y
CONFIG_MTD_NAND_FSL_ELBC=y
-CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND_FSL_IFC=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_MISC_DEVICES=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_PPC_EPAPR_HV_BYTECHAN=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
-CONFIG_HW_RANDOM=y
CONFIG_NVRAM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_USB_HID=m
CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
CONFIG_USB_MON=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_OF=y
-CONFIG_MMC_SDHCI_OF_ESDHC=y
CONFIG_EDAC=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_MPC85XX=y
CONFIG_JFFS2_FS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=m
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_INFO=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_RCU_TRACE=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_MD4=y
CONFIG_IPV6=y
CONFIG_IP_SCTP=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
+CONFIG_PPC64=y
+CONFIG_ALTIVEC=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=4
-CONFIG_KEXEC=y
-# CONFIG_RELOCATABLE is not set
+# CONFIG_PPC_PSERIES is not set
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_PMAC64=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_KEXEC=y
+CONFIG_IRQ_ALL_CPUS=y
+# CONFIG_MIGRATION is not set
CONFIG_PCI_MSI=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_IP_NF_QUEUE=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_IDE=y
CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDE_PMAC=y
+CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
-CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_IEEE1394=y
+CONFIG_IEEE1394_OHCI1394=y
+CONFIG_IEEE1394_SBP2=m
+CONFIG_IEEE1394_ETH1394=m
+CONFIG_IEEE1394_RAWIO=y
+CONFIG_IEEE1394_VIDEO1394=m
+CONFIG_IEEE1394_DV1394=m
+CONFIG_ADB_PMU=y
+CONFIG_PMAC_SMU=y
CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_THERM_PM72=y
+CONFIG_WINDFARM=y
+CONFIG_WINDFARM_PM81=y
+CONFIG_WINDFARM_PM91=y
+CONFIG_WINDFARM_PM112=y
+CONFIG_WINDFARM_PM121=y
CONFIG_NETDEVICES=y
-CONFIG_BONDING=m
CONFIG_DUMMY=m
-CONFIG_MII=y
+CONFIG_BONDING=m
CONFIG_TUN=m
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_SUNGEM=y
CONFIG_ACENIC=m
CONFIG_ACENIC_OMIT_TIGON_I=y
-CONFIG_TIGON3=y
CONFIG_E1000=y
-CONFIG_SUNGEM=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPPOE=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
+CONFIG_TIGON3=y
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
# CONFIG_USB_NET_ZAURUS is not set
+CONFIG_PPP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPPOE=m
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_MOUSE_PS2 is not set
+# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
CONFIG_RAW_DRIVER=y
CONFIG_I2C_CHARDEV=y
# CONFIG_HWMON is not set
-CONFIG_AGP=y
-CONFIG_DRM=y
-CONFIG_DRM_NOUVEAU=y
+CONFIG_AGP=m
+CONFIG_AGP_UNINORTH=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_TILEBLITTING=y
+CONFIG_FB_OF=y
+CONFIG_FB_NVIDIA=y
+CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_RADEON=y
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
CONFIG_SOUND=m
CONFIG_SND=m
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_POWERMAC=m
+CONFIG_SND_AOA=m
+CONFIG_SND_AOA_FABRIC_LAYOUT=m
+CONFIG_SND_AOA_ONYX=m
+CONFIG_SND_AOA_TAS=m
+CONFIG_SND_AOA_TOONIE=m
CONFIG_SND_USB_AUDIO=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
CONFIG_HID_GYRATION=y
CONFIG_LOGITECH_FF=y
CONFIG_HID_PANTHERLORD=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
-CONFIG_HID_PID=y
-CONFIG_USB_HIDDEV=y
CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
CONFIG_USB_MON=y
CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=y
CONFIG_USB_STORAGE=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_XFS_FS=m
CONFIG_XFS_POSIX_ACL=y
+CONFIG_INOTIFY=y
+CONFIG_AUTOFS_FS=m
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_HFSPLUS_FS=m
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFSD=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_CIFS=m
+CONFIG_PARTITION_ADVANCED=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_UTF8=y
+CONFIG_CRC_T10DIF=y
+CONFIG_LIBCRC32C=m
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MUTEXES=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_LATENCYTOP=y
-CONFIG_STRICT_DEVMEM=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_BOOTX_TEXT=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TWOFISH=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-# CONFIG_VIRTUALIZATION is not set
-CONFIG_CRC_T10DIF=y
-CONFIG_LIBCRC32C=m
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EXPERT=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
# CONFIG_PPC_CHRP is not set
# CONFIG_PPC_PMAC is not set
CONFIG_PPC_83xx=y
CONFIG_QUICC_ENGINE=y
CONFIG_QE_GPIO=y
CONFIG_MATH_EMULATION=y
-CONFIG_SPARSE_IRQ=y
CONFIG_PCI=y
CONFIG_NET=y
CONFIG_PACKET=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_SATA_FSL=y
CONFIG_SATA_SIL=y
CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_UCC_GETH=y
+CONFIG_GIANFAR=y
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_FIXED_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_GIANFAR=y
-CONFIG_UCC_GETH=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_INOTIFY=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
CONFIG_CRC_T10DIF=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_SHA256=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_AUDIT=y
-CONFIG_SPARSE_IRQ=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
CONFIG_MPC8540_ADS=y
CONFIG_MPC8560_ADS=y
CONFIG_MPC85xx_CDS=y
CONFIG_QUICC_ENGINE=y
CONFIG_QE_GPIO=y
CONFIG_HIGHMEM=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
CONFIG_BINFMT_MISC=m
CONFIG_MATH_EMULATION=y
CONFIG_FORCE_MAX_ZONEORDER=12
CONFIG_IPV6=y
CONFIG_IP_SCTP=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
CONFIG_FTL=y
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_M25P80=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_FSL_ELBC=y
CONFIG_MTD_NAND_FSL_IFC=y
-CONFIG_MTD_NAND_IDS=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_M25P80=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_LEGACY=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_FSL=y
CONFIG_PATA_ALI=y
+CONFIG_PATA_VIA=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
CONFIG_FS_ENET=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
CONFIG_USB_MON=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_FSL=y
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
CONFIG_CRC_T10DIF=y
CONFIG_DEBUG_FS=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_INFO=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_AUDIT=y
-CONFIG_SPARSE_IRQ=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
CONFIG_MPC8540_ADS=y
CONFIG_MPC8560_ADS=y
CONFIG_MPC85xx_CDS=y
CONFIG_QUICC_ENGINE=y
CONFIG_QE_GPIO=y
CONFIG_HIGHMEM=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
CONFIG_BINFMT_MISC=m
CONFIG_MATH_EMULATION=y
CONFIG_IRQ_ALL_CPUS=y
CONFIG_IPV6=y
CONFIG_IP_SCTP=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
CONFIG_FTL=y
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_M25P80=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_FSL_ELBC=y
CONFIG_MTD_NAND_FSL_IFC=y
-CONFIG_MTD_NAND_IDS=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_M25P80=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_LEGACY=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
CONFIG_USB_MON=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_FSL=y
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
CONFIG_CRC_T10DIF=y
CONFIG_DEBUG_FS=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_INFO=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
& feature);
}
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
#define HBP_NUM 1
-#endif /* CONFIG_HAVE_HW_BREAKPOINT */
#endif /* !__ASSEMBLY__ */
#include <asm/kvm_asm.h>
#include <asm/processor.h>
#include <asm/page.h>
+#include <asm/cacheflush.h>
#define KVM_MAX_VCPUS NR_CPUS
#define KVM_MAX_VCORES NR_CPUS
void kvmppc_free_lpid(long lpid);
void kvmppc_init_lpid(unsigned long nr_lpids);
+static inline void kvmppc_mmu_flush_icache(pfn_t pfn)
+{
+ /* Clear i-cache for new pages */
+ struct page *page;
+ page = pfn_to_page(pfn);
+ if (!test_bit(PG_arch_1, &page->flags)) {
+ flush_dcache_icache_page(page);
+ set_bit(PG_arch_1, &page->flags);
+ }
+}
+
+
#endif /* __POWERPC_KVM_PPC_H__ */
#include <linux/types.h>
#include <linux/spinlock.h>
#include <asm/smp.h>
+#include <asm/io.h>
struct mpic_msgr {
u32 __iomem *base;
return 0;
}
- if ((tbl->it_offset + tbl->it_size) > (mask >> IOMMU_PAGE_SHIFT)) {
- dev_info(dev, "Warning: IOMMU window too big for device mask\n");
- dev_info(dev, "mask: 0x%08llx, table end: 0x%08lx\n",
- mask, (tbl->it_offset + tbl->it_size) <<
- IOMMU_PAGE_SHIFT);
+ if (tbl->it_offset > (mask >> IOMMU_PAGE_SHIFT)) {
+ dev_info(dev, "Warning: IOMMU offset too big for device mask\n");
+ dev_info(dev, "mask: 0x%08llx, table offset: 0x%08lx\n",
+ mask, tbl->it_offset << IOMMU_PAGE_SHIFT);
return 0;
} else
return 1;
/* Do not emulate user-space instructions, instead single-step them */
if (user_mode(regs)) {
- bp->ctx->task->thread.last_hit_ubp = bp;
+ current->thread.last_hit_ubp = bp;
regs->msr |= MSR_SE;
goto out;
}
#include <asm/processor.h>
#include <asm/machdep.h>
#include <asm/debug.h>
+#include <linux/slab.h>
/*
* This table contains the mapping between PowerPC hardware trap types, and
return SIGHUP; /* default for things we don't know about */
}
+/**
+ *
+ * kgdb_skipexception - Bail out of KGDB when we've been triggered.
+ * @exception: Exception vector number
+ * @regs: Current &struct pt_regs.
+ *
+ * On some architectures we need to skip a breakpoint exception when
+ * it occurs after a breakpoint has been removed.
+ *
+ */
+int kgdb_skipexception(int exception, struct pt_regs *regs)
+{
+ return kgdb_isremovedbreak(regs->nip);
+}
+
static int kgdb_call_nmi_hook(struct pt_regs *regs)
{
kgdb_nmicallback(raw_smp_processor_id(), regs);
static int kgdb_singlestep(struct pt_regs *regs)
{
struct thread_info *thread_info, *exception_thread_info;
+ struct thread_info *backup_current_thread_info = \
+ (struct thread_info *)kmalloc(sizeof(struct thread_info), GFP_KERNEL);
if (user_mode(regs))
return 0;
thread_info = (struct thread_info *)(regs->gpr[1] & ~(THREAD_SIZE-1));
exception_thread_info = current_thread_info();
- if (thread_info != exception_thread_info)
+ if (thread_info != exception_thread_info) {
+ /* Save the original current_thread_info. */
+ memcpy(backup_current_thread_info, exception_thread_info, sizeof *thread_info);
memcpy(exception_thread_info, thread_info, sizeof *thread_info);
+ }
kgdb_handle_exception(0, SIGTRAP, 0, regs);
if (thread_info != exception_thread_info)
- memcpy(thread_info, exception_thread_info, sizeof *thread_info);
+ /* Restore current_thread_info lastly. */
+ memcpy(exception_thread_info, backup_current_thread_info, sizeof *thread_info);
return 1;
}
#else
linux_regs->msr |= MSR_SE;
#endif
- kgdb_single_step = 1;
atomic_set(&kgdb_cpu_doing_single_step,
raw_smp_processor_id());
}
long ret;
if (personality(current->personality) == PER_LINUX32
- && personality == PER_LINUX)
- personality = PER_LINUX32;
+ && personality(personality) == PER_LINUX)
+ personality = (personality & ~PER_MASK) | PER_LINUX32;
ret = sys_personality(personality);
- if (ret == PER_LINUX32)
- ret = PER_LINUX;
+ if (personality(ret) == PER_LINUX32)
+ ret = (ret & ~PER_MASK) | PER_LINUX;
return ret;
}
#endif
pteg1 |= PP_RWRX;
}
+ if (orig_pte->may_execute)
+ kvmppc_mmu_flush_icache(hpaddr >> PAGE_SHIFT);
+
local_irq_disable();
if (pteg[rr]) {
if (!orig_pte->may_execute)
rflags |= HPTE_R_N;
+ else
+ kvmppc_mmu_flush_icache(hpaddr >> PAGE_SHIFT);
hash = hpt_hash(va, PTE_SIZE, MMU_SEGSIZE_256M);
sync /* order setting ceded vs. testing prodded */
lbz r5,VCPU_PRODDED(r3)
cmpwi r5,0
- bne 1f
+ bne kvm_cede_prodded
li r0,0 /* set trap to 0 to say hcall is handled */
stw r0,VCPU_TRAP(r3)
li r0,H_SUCCESS
std r0,VCPU_GPR(R3)(r3)
BEGIN_FTR_SECTION
- b 2f /* just send it up to host on 970 */
+ b kvm_cede_exit /* just send it up to host on 970 */
END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_206)
/*
or r4,r4,r0
PPC_POPCNTW(R7,R4)
cmpw r7,r8
- bge 2f
+ bge kvm_cede_exit
stwcx. r4,0,r6
bne 31b
li r0,1
b hcall_real_fallback
/* cede when already previously prodded case */
-1: li r0,0
+kvm_cede_prodded:
+ li r0,0
stb r0,VCPU_PRODDED(r3)
sync /* order testing prodded vs. clearing ceded */
stb r0,VCPU_CEDED(r3)
blr
/* we've ceded but we want to give control to the host */
-2: li r3,H_TOO_HARD
+kvm_cede_exit:
+ li r3,H_TOO_HARD
blr
secondary_too_late:
static void clear_tlb1_bitmap(struct kvmppc_vcpu_e500 *vcpu_e500)
{
if (vcpu_e500->g2h_tlb1_map)
- memset(vcpu_e500->g2h_tlb1_map,
- sizeof(u64) * vcpu_e500->gtlb_params[1].entries, 0);
+ memset(vcpu_e500->g2h_tlb1_map, 0,
+ sizeof(u64) * vcpu_e500->gtlb_params[1].entries);
if (vcpu_e500->h2g_tlb1_rmap)
- memset(vcpu_e500->h2g_tlb1_rmap,
- sizeof(unsigned int) * host_tlb_params[1].entries, 0);
+ memset(vcpu_e500->h2g_tlb1_rmap, 0,
+ sizeof(unsigned int) * host_tlb_params[1].entries);
}
static void clear_tlb_privs(struct kvmppc_vcpu_e500 *vcpu_e500)
kvmppc_e500_setup_stlbe(&vcpu_e500->vcpu, gtlbe, tsize,
ref, gvaddr, stlbe);
+
+ /* Clear i-cache for new pages */
+ kvmppc_mmu_flush_icache(pfn);
}
/* XXX only map the one-one case, for now use TLB0 */
std r0,16(r1)
stdu r1,-STACKFRAMESIZE(r1)
bl .enter_vmx_usercopy
- cmpwi r3,0
+ cmpwi cr1,r3,0
ld r0,STACKFRAMESIZE+16(r1)
ld r3,STACKFRAMESIZE+48(r1)
ld r4,STACKFRAMESIZE+56(r1)
dcbt r0,r8,0b01010 /* GO */
.machine pop
- /*
- * We prefetch both the source and destination using enhanced touch
- * instructions. We use a stream ID of 0 for the load side and
- * 1 for the store side.
- */
- clrrdi r6,r4,7
- clrrdi r9,r3,7
- ori r9,r9,1 /* stream=1 */
-
- srdi r7,r5,7 /* length in cachelines, capped at 0x3FF */
- cmpldi cr1,r7,0x3FF
- ble cr1,1f
- li r7,0x3FF
-1: lis r0,0x0E00 /* depth=7 */
- sldi r7,r7,7
- or r7,r7,r0
- ori r10,r7,1 /* stream=1 */
-
- lis r8,0x8000 /* GO=1 */
- clrldi r8,r8,32
-
-.machine push
-.machine "power4"
- dcbt r0,r6,0b01000
- dcbt r0,r7,0b01010
- dcbtst r0,r9,0b01000
- dcbtst r0,r10,0b01010
- eieio
- dcbt r0,r8,0b01010 /* GO */
-.machine pop
-
- beq .Lunwind_stack_nonvmx_copy
+ beq cr1,.Lunwind_stack_nonvmx_copy
/*
* If source and destination are not relatively aligned we use a
std r0,16(r1)
stdu r1,-STACKFRAMESIZE(r1)
bl .enter_vmx_copy
- cmpwi r3,0
+ cmpwi cr1,r3,0
ld r0,STACKFRAMESIZE+16(r1)
ld r3,STACKFRAMESIZE+48(r1)
ld r4,STACKFRAMESIZE+56(r1)
dcbt r0,r8,0b01010 /* GO */
.machine pop
- beq .Lunwind_stack_nonvmx_copy
+ beq cr1,.Lunwind_stack_nonvmx_copy
/*
* If source and destination are not relatively aligned we use a
__flush_dcache_icache_phys(page_to_pfn(page) << PAGE_SHIFT);
#endif
}
+EXPORT_SYMBOL(flush_dcache_icache_page);
void clear_user_page(void *page, unsigned long vaddr, struct page *pg)
{
if (!event->hw.idx || is_limited_pmc(event->hw.idx))
continue;
val = read_pmc(event->hw.idx);
- if ((int)val < 0) {
+ if (pmc_overflow(val)) {
/* event has overflowed */
found = 1;
record_and_restart(event, val, regs);
iounmap(hose->cfg_data);
iounmap(hose->cfg_addr);
pcibios_free_controller(hose);
- return 0;
+ return -ENODEV;
}
setup_pci_cmd(hose);
void __devinit fsl_pci_init(void)
{
+ int ret;
struct device_node *node;
struct pci_controller *hose;
dma_addr_t max = 0xffffffff;
if (!fsl_pci_primary)
fsl_pci_primary = node;
- fsl_add_bridge(node, fsl_pci_primary == node);
- hose = pci_find_hose_for_OF_device(node);
- max = min(max, hose->dma_window_base_cur +
- hose->dma_window_size);
+ ret = fsl_add_bridge(node, fsl_pci_primary == node);
+ if (ret == 0) {
+ hose = pci_find_hose_for_OF_device(node);
+ max = min(max, hose->dma_window_base_cur +
+ hose->dma_window_size);
+ }
}
}
#include <linux/list.h>
#include <linux/of_platform.h>
#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/slab.h>
#include <asm/prom.h>
#include <asm/hw_irq.h>
#include <asm/ppc-pci.h>
#include <linux/reboot.h>
#include <linux/delay.h>
#include <linux/kallsyms.h>
+#include <linux/kmsg_dump.h>
#include <linux/cpumask.h>
#include <linux/export.h>
#include <linux/sysrq.h>
#endif
default:
printf("Unrecognized command: ");
- do {
+ do {
if (' ' < cmd && cmd <= '~')
putchar(cmd);
else
printf("\\x%x", cmd);
cmd = inchar();
- } while (cmd != '\n');
+ } while (cmd != '\n');
printf(" (type ? for help)\n");
break;
}
return 1;
}
-static char *breakpoint_help_string =
+static char *breakpoint_help_string =
"Breakpoint command usage:\n"
"b show breakpoints\n"
"b <addr> [cnt] set breakpoint at given instr addr\n"
default:
termch = cmd;
- cmd = skipbl();
+ cmd = skipbl();
if (cmd == '?') {
printf(breakpoint_help_string);
break;
sp + REGS_OFFSET);
break;
}
- printf("--- Exception: %lx %s at ", regs.trap,
+ printf("--- Exception: %lx %s at ", regs.trap,
getvecname(TRAP(®s)));
pc = regs.nip;
lr = regs.link;
cmd = skipbl();
if (cmd == '\n') {
- unsigned long sp, toc;
+ unsigned long sp, toc;
asm("mr %0,1" : "=r" (sp) :);
asm("mr %0,2" : "=r" (toc) :);
printf("msr = "REG" sprg0= "REG"\n",
mfmsr(), mfspr(SPRN_SPRG0));
printf("pvr = "REG" sprg1= "REG"\n",
- mfspr(SPRN_PVR), mfspr(SPRN_SPRG1));
+ mfspr(SPRN_PVR), mfspr(SPRN_SPRG1));
printf("dec = "REG" sprg2= "REG"\n",
mfspr(SPRN_DEC), mfspr(SPRN_SPRG2));
printf("sp = "REG" sprg3= "REG"\n", sp, mfspr(SPRN_SPRG3));
static int brev;
static int mnoread;
-static char *memex_help_string =
+static char *memex_help_string =
"Memory examine command usage:\n"
"m [addr] [flags] examine/change memory\n"
" addr is optional. will start where left off.\n"
"NOTE: flags are saved as defaults\n"
"";
-static char *memex_subcmd_help_string =
+static char *memex_subcmd_help_string =
"Memory examine subcommands:\n"
" hexval write this val to current location\n"
" 'string' write chars from string to this location\n"
nr = mread(adrs, temp, r);
adrs += nr;
for (m = 0; m < r; ++m) {
- if ((m & (sizeof(long) - 1)) == 0 && m > 0)
+ if ((m & (sizeof(long) - 1)) == 0 && m > 0)
putchar(' ');
if (m < nr)
printf("%.2x", temp[m]);
printf("%s", fault_chars[fault_type]);
}
for (; m < 16; ++m) {
- if ((m & (sizeof(long) - 1)) == 0)
+ if ((m & (sizeof(long) - 1)) == 0)
putchar(' ');
printf(" ");
}
void
dump_log_buf(void)
{
- const unsigned long size = 128;
- unsigned long end, addr;
- unsigned char buf[size + 1];
-
- addr = 0;
- buf[size] = '\0';
-
- if (setjmp(bus_error_jmp) != 0) {
- printf("Unable to lookup symbol __log_buf!\n");
- return;
- }
-
- catch_memory_errors = 1;
- sync();
- addr = kallsyms_lookup_name("__log_buf");
-
- if (! addr)
- printf("Symbol __log_buf not found!\n");
- else {
- end = addr + (1 << CONFIG_LOG_BUF_SHIFT);
- while (addr < end) {
- if (! mread(addr, buf, size)) {
- printf("Can't read memory at address 0x%lx\n", addr);
- break;
- }
-
- printf("%s", buf);
-
- if (strlen(buf) < size)
- break;
-
- addr += size;
- }
- }
-
- sync();
- /* wait a little while to see if we get a machine check */
- __delay(200);
- catch_memory_errors = 0;
+ struct kmsg_dumper dumper = { .active = 1 };
+ unsigned char buf[128];
+ size_t len;
+
+ if (setjmp(bus_error_jmp) != 0) {
+ printf("Error dumping printk buffer!\n");
+ return;
+ }
+
+ catch_memory_errors = 1;
+ sync();
+
+ kmsg_dump_rewind_nolock(&dumper);
+ while (kmsg_dump_get_line_nolock(&dumper, false, buf, sizeof(buf), &len)) {
+ buf[len] = '\0';
+ printf("%s", buf);
+ }
+
+ sync();
+ /* wait a little while to see if we get a machine check */
+ __delay(200);
+ catch_memory_errors = 0;
}
/*
* Simple spin lock operations. There are two variants, one clears IRQ's
* on the local processor, one does not.
*
- * These are fair FIFO ticket locks, which are currently limited to 256
- * CPUs.
+ * These are fair FIFO ticket locks, which support up to 2^16 CPUs.
*
* (the type definitions are in asm/spinlock_types.h)
*/
#endif
#ifdef P6_NOP1
-static const unsigned char __initconst_or_module p6nops[] =
+static const unsigned char p6nops[] =
{
P6_NOP1,
P6_NOP2,
if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) {
break_affinity = 1;
- affinity = cpu_all_mask;
+ affinity = cpu_online_mask;
}
chip = irq_data_get_irq_chip(data);
unsigned int *current_size)
{
struct microcode_header_amd *mc_hdr;
- unsigned int actual_size;
+ unsigned int actual_size, patch_size;
u16 equiv_cpu_id;
/* size of the current patch we're staring at */
- *current_size = *(u32 *)(ucode_ptr + 4) + SECTION_HDR_SIZE;
+ patch_size = *(u32 *)(ucode_ptr + 4);
+ *current_size = patch_size + SECTION_HDR_SIZE;
equiv_cpu_id = find_equiv_id();
if (!equiv_cpu_id)
/*
* now that the header looks sane, verify its size
*/
- actual_size = verify_ucode_size(cpu, *current_size, leftover_size);
+ actual_size = verify_ucode_size(cpu, patch_size, leftover_size);
if (!actual_size)
return 0;
return address_mask(ctxt, reg);
}
+static void masked_increment(ulong *reg, ulong mask, int inc)
+{
+ assign_masked(reg, *reg + inc, mask);
+}
+
static inline void
register_address_increment(struct x86_emulate_ctxt *ctxt, unsigned long *reg, int inc)
{
+ ulong mask;
+
if (ctxt->ad_bytes == sizeof(unsigned long))
- *reg += inc;
+ mask = ~0UL;
else
- *reg = (*reg & ~ad_mask(ctxt)) | ((*reg + inc) & ad_mask(ctxt));
+ mask = ad_mask(ctxt);
+ masked_increment(reg, mask, inc);
+}
+
+static void rsp_increment(struct x86_emulate_ctxt *ctxt, int inc)
+{
+ masked_increment(&ctxt->regs[VCPU_REGS_RSP], stack_mask(ctxt), inc);
}
static inline void jmp_rel(struct x86_emulate_ctxt *ctxt, int rel)
{
struct segmented_address addr;
- register_address_increment(ctxt, &ctxt->regs[VCPU_REGS_RSP], -bytes);
- addr.ea = register_address(ctxt, ctxt->regs[VCPU_REGS_RSP]);
+ rsp_increment(ctxt, -bytes);
+ addr.ea = ctxt->regs[VCPU_REGS_RSP] & stack_mask(ctxt);
addr.seg = VCPU_SREG_SS;
return segmented_write(ctxt, addr, data, bytes);
int rc;
struct segmented_address addr;
- addr.ea = register_address(ctxt, ctxt->regs[VCPU_REGS_RSP]);
+ addr.ea = ctxt->regs[VCPU_REGS_RSP] & stack_mask(ctxt);
addr.seg = VCPU_SREG_SS;
rc = segmented_read(ctxt, addr, dest, len);
if (rc != X86EMUL_CONTINUE)
return rc;
- register_address_increment(ctxt, &ctxt->regs[VCPU_REGS_RSP], len);
+ rsp_increment(ctxt, len);
return rc;
}
while (reg >= VCPU_REGS_RAX) {
if (reg == VCPU_REGS_RSP) {
- register_address_increment(ctxt, &ctxt->regs[VCPU_REGS_RSP],
- ctxt->op_bytes);
+ rsp_increment(ctxt, ctxt->op_bytes);
--reg;
}
rc = emulate_pop(ctxt, &ctxt->dst.val, ctxt->op_bytes);
if (rc != X86EMUL_CONTINUE)
return rc;
- register_address_increment(ctxt, &ctxt->regs[VCPU_REGS_RSP], ctxt->src.val);
+ rsp_increment(ctxt, ctxt->src.val);
return X86EMUL_CONTINUE;
}
int idx;
LIST_HEAD(invalid_list);
+ /*
+ * Never scan more than sc->nr_to_scan VM instances.
+ * Will not hit this condition practically since we do not try
+ * to shrink more than one VM and it is very unlikely to see
+ * !n_used_mmu_pages so many times.
+ */
+ if (!nr_to_scan--)
+ break;
/*
* n_used_mmu_pages is accessed without holding kvm->mmu_lock
* here. We may skip a VM instance errorneosly, but we do not
* want to shrink a VM that only started to populate its MMU
* anyway.
*/
- if (kvm->arch.n_used_mmu_pages > 0) {
- if (!nr_to_scan--)
- break;
+ if (!kvm->arch.n_used_mmu_pages)
continue;
- }
idx = srcu_read_lock(&kvm->srcu);
spin_lock(&kvm->mmu_lock);
* kvm-specific. Those are put in the beginning of the list.
*/
-#define KVM_SAVE_MSRS_BEGIN 9
+#define KVM_SAVE_MSRS_BEGIN 10
static u32 msrs_to_save[] = {
MSR_KVM_SYSTEM_TIME, MSR_KVM_WALL_CLOCK,
MSR_KVM_SYSTEM_TIME_NEW, MSR_KVM_WALL_CLOCK_NEW,
#include <linux/pci.h>
#include <linux/gfp.h>
#include <linux/memblock.h>
-#include <linux/syscore_ops.h>
#include <xen/xen.h>
#include <xen/interface/xen.h>
#endif
}
-#ifdef CONFIG_XEN_PVHVM
-/*
- * The pfn containing the shared_info is located somewhere in RAM. This
- * will cause trouble if the current kernel is doing a kexec boot into a
- * new kernel. The new kernel (and its startup code) can not know where
- * the pfn is, so it can not reserve the page. The hypervisor will
- * continue to update the pfn, and as a result memory corruption occours
- * in the new kernel.
- *
- * One way to work around this issue is to allocate a page in the
- * xen-platform pci device's BAR memory range. But pci init is done very
- * late and the shared_info page is already in use very early to read
- * the pvclock. So moving the pfn from RAM to MMIO is racy because some
- * code paths on other vcpus could access the pfn during the small
- * window when the old pfn is moved to the new pfn. There is even a
- * small window were the old pfn is not backed by a mfn, and during that
- * time all reads return -1.
- *
- * Because it is not known upfront where the MMIO region is located it
- * can not be used right from the start in xen_hvm_init_shared_info.
- *
- * To minimise trouble the move of the pfn is done shortly before kexec.
- * This does not eliminate the race because all vcpus are still online
- * when the syscore_ops will be called. But hopefully there is no work
- * pending at this point in time. Also the syscore_op is run last which
- * reduces the risk further.
- */
-
-static struct shared_info *xen_hvm_shared_info;
-
-static void xen_hvm_connect_shared_info(unsigned long pfn)
+void __ref xen_hvm_init_shared_info(void)
{
+ int cpu;
struct xen_add_to_physmap xatp;
+ static struct shared_info *shared_info_page = 0;
+ if (!shared_info_page)
+ shared_info_page = (struct shared_info *)
+ extend_brk(PAGE_SIZE, PAGE_SIZE);
xatp.domid = DOMID_SELF;
xatp.idx = 0;
xatp.space = XENMAPSPACE_shared_info;
- xatp.gpfn = pfn;
+ xatp.gpfn = __pa(shared_info_page) >> PAGE_SHIFT;
if (HYPERVISOR_memory_op(XENMEM_add_to_physmap, &xatp))
BUG();
-}
-static void xen_hvm_set_shared_info(struct shared_info *sip)
-{
- int cpu;
-
- HYPERVISOR_shared_info = sip;
+ HYPERVISOR_shared_info = (struct shared_info *)shared_info_page;
/* xen_vcpu is a pointer to the vcpu_info struct in the shared_info
* page, we use it in the event channel upcall and in some pvclock
* related functions. We don't need the vcpu_info placement
* optimizations because we don't use any pv_mmu or pv_irq op on
* HVM.
- * When xen_hvm_set_shared_info is run at boot time only vcpu 0 is
- * online but xen_hvm_set_shared_info is run at resume time too and
+ * When xen_hvm_init_shared_info is run at boot time only vcpu 0 is
+ * online but xen_hvm_init_shared_info is run at resume time too and
* in that case multiple vcpus might be online. */
for_each_online_cpu(cpu) {
per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu];
}
}
-/* Reconnect the shared_info pfn to a mfn */
-void xen_hvm_resume_shared_info(void)
-{
- xen_hvm_connect_shared_info(__pa(xen_hvm_shared_info) >> PAGE_SHIFT);
-}
-
-#ifdef CONFIG_KEXEC
-static struct shared_info *xen_hvm_shared_info_kexec;
-static unsigned long xen_hvm_shared_info_pfn_kexec;
-
-/* Remember a pfn in MMIO space for kexec reboot */
-void __devinit xen_hvm_prepare_kexec(struct shared_info *sip, unsigned long pfn)
-{
- xen_hvm_shared_info_kexec = sip;
- xen_hvm_shared_info_pfn_kexec = pfn;
-}
-
-static void xen_hvm_syscore_shutdown(void)
-{
- struct xen_memory_reservation reservation = {
- .domid = DOMID_SELF,
- .nr_extents = 1,
- };
- unsigned long prev_pfn;
- int rc;
-
- if (!xen_hvm_shared_info_kexec)
- return;
-
- prev_pfn = __pa(xen_hvm_shared_info) >> PAGE_SHIFT;
- set_xen_guest_handle(reservation.extent_start, &prev_pfn);
-
- /* Move pfn to MMIO, disconnects previous pfn from mfn */
- xen_hvm_connect_shared_info(xen_hvm_shared_info_pfn_kexec);
-
- /* Update pointers, following hypercall is also a memory barrier */
- xen_hvm_set_shared_info(xen_hvm_shared_info_kexec);
-
- /* Allocate new mfn for previous pfn */
- do {
- rc = HYPERVISOR_memory_op(XENMEM_populate_physmap, &reservation);
- if (rc == 0)
- msleep(123);
- } while (rc == 0);
-
- /* Make sure the previous pfn is really connected to a (new) mfn */
- BUG_ON(rc != 1);
-}
-
-static struct syscore_ops xen_hvm_syscore_ops = {
- .shutdown = xen_hvm_syscore_shutdown,
-};
-#endif
-
-/* Use a pfn in RAM, may move to MMIO before kexec. */
-static void __init xen_hvm_init_shared_info(void)
-{
- /* Remember pointer for resume */
- xen_hvm_shared_info = extend_brk(PAGE_SIZE, PAGE_SIZE);
- xen_hvm_connect_shared_info(__pa(xen_hvm_shared_info) >> PAGE_SHIFT);
- xen_hvm_set_shared_info(xen_hvm_shared_info);
-}
-
+#ifdef CONFIG_XEN_PVHVM
static void __init init_hvm_pv_info(void)
{
int major, minor;
init_hvm_pv_info();
xen_hvm_init_shared_info();
-#ifdef CONFIG_KEXEC
- register_syscore_ops(&xen_hvm_syscore_ops);
-#endif
if (xen_feature(XENFEAT_hvm_callback_vector))
xen_have_vector_callback = 1;
/* When we populate back during bootup, the amount of pages can vary. The
* max we have is seen is 395979, but that does not mean it can't be more.
- * But some machines can have 3GB I/O holes even. So lets reserve enough
- * for 4GB of I/O and E820 holes. */
-RESERVE_BRK(p2m_populated, PMD_SIZE * 4);
+ * Some machines can have 3GB I/O holes even. With early_can_reuse_p2m_middle
+ * it can re-use Xen provided mfn_list array, so we only need to allocate at
+ * most three P2M top nodes. */
+RESERVE_BRK(p2m_populated, PAGE_SIZE * 3);
+
static inline unsigned p2m_top_index(unsigned long pfn)
{
BUG_ON(pfn >= MAX_P2M_PFN);
}
return true;
}
+
+/*
+ * Skim over the P2M tree looking at pages that are either filled with
+ * INVALID_P2M_ENTRY or with 1:1 PFNs. If found, re-use that page and
+ * replace the P2M leaf with a p2m_missing or p2m_identity.
+ * Stick the old page in the new P2M tree location.
+ */
+bool __init early_can_reuse_p2m_middle(unsigned long set_pfn, unsigned long set_mfn)
+{
+ unsigned topidx;
+ unsigned mididx;
+ unsigned ident_pfns;
+ unsigned inv_pfns;
+ unsigned long *p2m;
+ unsigned long *mid_mfn_p;
+ unsigned idx;
+ unsigned long pfn;
+
+ /* We only look when this entails a P2M middle layer */
+ if (p2m_index(set_pfn))
+ return false;
+
+ for (pfn = 0; pfn <= MAX_DOMAIN_PAGES; pfn += P2M_PER_PAGE) {
+ topidx = p2m_top_index(pfn);
+
+ if (!p2m_top[topidx])
+ continue;
+
+ if (p2m_top[topidx] == p2m_mid_missing)
+ continue;
+
+ mididx = p2m_mid_index(pfn);
+ p2m = p2m_top[topidx][mididx];
+ if (!p2m)
+ continue;
+
+ if ((p2m == p2m_missing) || (p2m == p2m_identity))
+ continue;
+
+ if ((unsigned long)p2m == INVALID_P2M_ENTRY)
+ continue;
+
+ ident_pfns = 0;
+ inv_pfns = 0;
+ for (idx = 0; idx < P2M_PER_PAGE; idx++) {
+ /* IDENTITY_PFNs are 1:1 */
+ if (p2m[idx] == IDENTITY_FRAME(pfn + idx))
+ ident_pfns++;
+ else if (p2m[idx] == INVALID_P2M_ENTRY)
+ inv_pfns++;
+ else
+ break;
+ }
+ if ((ident_pfns == P2M_PER_PAGE) || (inv_pfns == P2M_PER_PAGE))
+ goto found;
+ }
+ return false;
+found:
+ /* Found one, replace old with p2m_identity or p2m_missing */
+ p2m_top[topidx][mididx] = (ident_pfns ? p2m_identity : p2m_missing);
+ /* And the other for save/restore.. */
+ mid_mfn_p = p2m_top_mfn_p[topidx];
+ /* NOTE: Even if it is a p2m_identity it should still be point to
+ * a page filled with INVALID_P2M_ENTRY entries. */
+ mid_mfn_p[mididx] = virt_to_mfn(p2m_missing);
+
+ /* Reset where we want to stick the old page in. */
+ topidx = p2m_top_index(set_pfn);
+ mididx = p2m_mid_index(set_pfn);
+
+ /* This shouldn't happen */
+ if (WARN_ON(p2m_top[topidx] == p2m_mid_missing))
+ early_alloc_p2m(set_pfn);
+
+ if (WARN_ON(p2m_top[topidx][mididx] != p2m_missing))
+ return false;
+
+ p2m_init(p2m);
+ p2m_top[topidx][mididx] = p2m;
+ mid_mfn_p = p2m_top_mfn_p[topidx];
+ mid_mfn_p[mididx] = virt_to_mfn(p2m);
+
+ return true;
+}
bool __init early_set_phys_to_machine(unsigned long pfn, unsigned long mfn)
{
if (unlikely(!__set_phys_to_machine(pfn, mfn))) {
if (!early_alloc_p2m(pfn))
return false;
+ if (early_can_reuse_p2m_middle(pfn, mfn))
+ return __set_phys_to_machine(pfn, mfn);
+
if (!early_alloc_p2m_middle(pfn, false /* boundary crossover OK!*/))
return false;
memblock_reserve(start, size);
xen_max_p2m_pfn = PFN_DOWN(start + size);
+ for (pfn = PFN_DOWN(start); pfn < xen_max_p2m_pfn; pfn++) {
+ unsigned long mfn = pfn_to_mfn(pfn);
+
+ if (WARN(mfn == pfn, "Trying to over-write 1-1 mapping (pfn: %lx)\n", pfn))
+ continue;
+ WARN(mfn != INVALID_P2M_ENTRY, "Trying to remove %lx which has %lx mfn!\n",
+ pfn, mfn);
- for (pfn = PFN_DOWN(start); pfn <= xen_max_p2m_pfn; pfn++)
__set_phys_to_machine(pfn, INVALID_P2M_ENTRY);
+ }
}
static unsigned long __init xen_do_chunk(unsigned long start,
{
#ifdef CONFIG_XEN_PVHVM
int cpu;
- xen_hvm_resume_shared_info();
+ xen_hvm_init_shared_info();
xen_callback_vector();
xen_unplug_emulated_devices();
if (xen_feature(XENFEAT_hvm_safe_pvclock)) {
void xen_vcpu_restore(void);
void xen_callback_vector(void);
-void xen_hvm_resume_shared_info(void);
+void xen_hvm_init_shared_info(void);
void xen_unplug_emulated_devices(void);
void __init xen_build_dynamic_phys_to_machine(void);
struct request_queue *q = bdev_get_queue(bdev);
int type = REQ_WRITE | REQ_DISCARD;
unsigned int max_discard_sectors;
+ unsigned int granularity, alignment, mask;
struct bio_batch bb;
struct bio *bio;
int ret = 0;
if (!blk_queue_discard(q))
return -EOPNOTSUPP;
+ /* Zero-sector (unknown) and one-sector granularities are the same. */
+ granularity = max(q->limits.discard_granularity >> 9, 1U);
+ mask = granularity - 1;
+ alignment = (bdev_discard_alignment(bdev) >> 9) & mask;
+
/*
* Ensure that max_discard_sectors is of the proper
- * granularity
+ * granularity, so that requests stay aligned after a split.
*/
max_discard_sectors = min(q->limits.max_discard_sectors, UINT_MAX >> 9);
+ max_discard_sectors = round_down(max_discard_sectors, granularity);
if (unlikely(!max_discard_sectors)) {
/* Avoid infinite loop below. Being cautious never hurts. */
return -EOPNOTSUPP;
- } else if (q->limits.discard_granularity) {
- unsigned int disc_sects = q->limits.discard_granularity >> 9;
-
- max_discard_sectors &= ~(disc_sects - 1);
}
if (flags & BLKDEV_DISCARD_SECURE) {
bb.wait = &wait;
while (nr_sects) {
+ unsigned int req_sects;
+ sector_t end_sect;
+
bio = bio_alloc(gfp_mask, 1);
if (!bio) {
ret = -ENOMEM;
break;
}
+ req_sects = min_t(sector_t, nr_sects, max_discard_sectors);
+
+ /*
+ * If splitting a request, and the next starting sector would be
+ * misaligned, stop the discard at the previous aligned sector.
+ */
+ end_sect = sector + req_sects;
+ if (req_sects < nr_sects && (end_sect & mask) != alignment) {
+ end_sect =
+ round_down(end_sect - alignment, granularity)
+ + alignment;
+ req_sects = end_sect - sector;
+ }
+
bio->bi_sector = sector;
bio->bi_end_io = bio_batch_end_io;
bio->bi_bdev = bdev;
bio->bi_private = &bb;
- if (nr_sects > max_discard_sectors) {
- bio->bi_size = max_discard_sectors << 9;
- nr_sects -= max_discard_sectors;
- sector += max_discard_sectors;
- } else {
- bio->bi_size = nr_sects << 9;
- nr_sects = 0;
- }
+ bio->bi_size = req_sects << 9;
+ nr_sects -= req_sects;
+ sector = end_sect;
atomic_inc(&bb.done);
submit_bio(type, bio);
return 0;
}
+static void
+__blk_segment_map_sg(struct request_queue *q, struct bio_vec *bvec,
+ struct scatterlist *sglist, struct bio_vec **bvprv,
+ struct scatterlist **sg, int *nsegs, int *cluster)
+{
+
+ int nbytes = bvec->bv_len;
+
+ if (*bvprv && *cluster) {
+ if ((*sg)->length + nbytes > queue_max_segment_size(q))
+ goto new_segment;
+
+ if (!BIOVEC_PHYS_MERGEABLE(*bvprv, bvec))
+ goto new_segment;
+ if (!BIOVEC_SEG_BOUNDARY(q, *bvprv, bvec))
+ goto new_segment;
+
+ (*sg)->length += nbytes;
+ } else {
+new_segment:
+ if (!*sg)
+ *sg = sglist;
+ else {
+ /*
+ * If the driver previously mapped a shorter
+ * list, we could see a termination bit
+ * prematurely unless it fully inits the sg
+ * table on each mapping. We KNOW that there
+ * must be more entries here or the driver
+ * would be buggy, so force clear the
+ * termination bit to avoid doing a full
+ * sg_init_table() in drivers for each command.
+ */
+ (*sg)->page_link &= ~0x02;
+ *sg = sg_next(*sg);
+ }
+
+ sg_set_page(*sg, bvec->bv_page, nbytes, bvec->bv_offset);
+ (*nsegs)++;
+ }
+ *bvprv = bvec;
+}
+
/*
* map a request to scatterlist, return number of sg entries setup. Caller
* must make sure sg can hold rq->nr_phys_segments entries
bvprv = NULL;
sg = NULL;
rq_for_each_segment(bvec, rq, iter) {
- int nbytes = bvec->bv_len;
-
- if (bvprv && cluster) {
- if (sg->length + nbytes > queue_max_segment_size(q))
- goto new_segment;
-
- if (!BIOVEC_PHYS_MERGEABLE(bvprv, bvec))
- goto new_segment;
- if (!BIOVEC_SEG_BOUNDARY(q, bvprv, bvec))
- goto new_segment;
-
- sg->length += nbytes;
- } else {
-new_segment:
- if (!sg)
- sg = sglist;
- else {
- /*
- * If the driver previously mapped a shorter
- * list, we could see a termination bit
- * prematurely unless it fully inits the sg
- * table on each mapping. We KNOW that there
- * must be more entries here or the driver
- * would be buggy, so force clear the
- * termination bit to avoid doing a full
- * sg_init_table() in drivers for each command.
- */
- sg->page_link &= ~0x02;
- sg = sg_next(sg);
- }
-
- sg_set_page(sg, bvec->bv_page, nbytes, bvec->bv_offset);
- nsegs++;
- }
- bvprv = bvec;
+ __blk_segment_map_sg(q, bvec, sglist, &bvprv, &sg,
+ &nsegs, &cluster);
} /* segments in rq */
}
EXPORT_SYMBOL(blk_rq_map_sg);
+/**
+ * blk_bio_map_sg - map a bio to a scatterlist
+ * @q: request_queue in question
+ * @bio: bio being mapped
+ * @sglist: scatterlist being mapped
+ *
+ * Note:
+ * Caller must make sure sg can hold bio->bi_phys_segments entries
+ *
+ * Will return the number of sg entries setup
+ */
+int blk_bio_map_sg(struct request_queue *q, struct bio *bio,
+ struct scatterlist *sglist)
+{
+ struct bio_vec *bvec, *bvprv;
+ struct scatterlist *sg;
+ int nsegs, cluster;
+ unsigned long i;
+
+ nsegs = 0;
+ cluster = blk_queue_cluster(q);
+
+ bvprv = NULL;
+ sg = NULL;
+ bio_for_each_segment(bvec, bio, i) {
+ __blk_segment_map_sg(q, bvec, sglist, &bvprv, &sg,
+ &nsegs, &cluster);
+ } /* segments in bio */
+
+ if (sg)
+ sg_mark_end(sg);
+
+ BUG_ON(bio->bi_phys_segments && nsegs > bio->bi_phys_segments);
+ return nsegs;
+}
+EXPORT_SYMBOL(blk_bio_map_sg);
+
static inline int ll_new_hw_segment(struct request_queue *q,
struct request *req,
struct bio *bio)
static void *show_partition_start(struct seq_file *seqf, loff_t *pos)
{
- static void *p;
+ void *p;
p = disk_seqf_start(seqf, pos);
if (!IS_ERR_OR_NULL(p) && !*pos)
If unsure, say N.
config ATA_SFF
- bool "ATA SFF support"
+ bool "ATA SFF support (for legacy IDE and PATA)"
default y
help
This option adds support for ATA controllers with SFF
{ PCI_VDEVICE(INTEL, 0x8c07), board_ahci }, /* Lynx Point RAID */
{ PCI_VDEVICE(INTEL, 0x8c0e), board_ahci }, /* Lynx Point RAID */
{ PCI_VDEVICE(INTEL, 0x8c0f), board_ahci }, /* Lynx Point RAID */
+ { PCI_VDEVICE(INTEL, 0x9c02), board_ahci }, /* Lynx Point-LP AHCI */
+ { PCI_VDEVICE(INTEL, 0x9c03), board_ahci }, /* Lynx Point-LP AHCI */
+ { PCI_VDEVICE(INTEL, 0x9c04), board_ahci }, /* Lynx Point-LP RAID */
+ { PCI_VDEVICE(INTEL, 0x9c05), board_ahci }, /* Lynx Point-LP RAID */
+ { PCI_VDEVICE(INTEL, 0x9c06), board_ahci }, /* Lynx Point-LP RAID */
+ { PCI_VDEVICE(INTEL, 0x9c07), board_ahci }, /* Lynx Point-LP RAID */
+ { PCI_VDEVICE(INTEL, 0x9c0e), board_ahci }, /* Lynx Point-LP RAID */
+ { PCI_VDEVICE(INTEL, 0x9c0f), board_ahci }, /* Lynx Point-LP RAID */
/* JMicron 360/1/3/5/6, match class to avoid IDE function */
{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
extern struct ata_port_operations ahci_ops;
extern struct ata_port_operations ahci_pmp_retry_srst_ops;
+unsigned int ahci_dev_classify(struct ata_port *ap);
void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
u32 opts);
void ahci_save_initial_config(struct device *dev,
{ 0x8086, 0x8c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (Lynx Point) */
{ 0x8086, 0x8c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (Lynx Point-LP) */
+ { 0x8086, 0x9c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
+ /* SATA Controller IDE (Lynx Point-LP) */
+ { 0x8086, 0x9c01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
+ /* SATA Controller IDE (Lynx Point-LP) */
+ { 0x8086, 0x9c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (Lynx Point-LP) */
+ { 0x8086, 0x9c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (DH89xxCC) */
{ 0x8086, 0x2326, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
{ } /* terminate list */
}
}
-static unsigned int ahci_dev_classify(struct ata_port *ap)
+unsigned int ahci_dev_classify(struct ata_port *ap)
{
void __iomem *port_mmio = ahci_port_base(ap);
struct ata_taskfile tf;
return ata_dev_classify(&tf);
}
+EXPORT_SYMBOL_GPL(ahci_dev_classify);
void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
u32 opts)
if (ap->flags & ATA_FLAG_ACPI_SATA)
return NULL;
- /*
- * If acpi bind operation has already happened, we can get the handle
- * for the port by checking the corresponding scsi_host device's
- * firmware node, otherwise we will need to find out the handle from
- * its parent's acpi node.
- */
- if (ap->scsi_host)
- return DEVICE_ACPI_HANDLE(&ap->scsi_host->shost_gendev);
- else
- return acpi_get_child(DEVICE_ACPI_HANDLE(ap->host->dev),
- ap->port_no);
+ return acpi_get_child(DEVICE_ACPI_HANDLE(ap->host->dev), ap->port_no);
}
EXPORT_SYMBOL(ata_ap_acpi_handle);
if (!*handle)
return -ENODEV;
+ if (ata_acpi_gtm(ap, &ap->__acpi_init_gtm) == 0)
+ ap->pflags |= ATA_PFLAG_INIT_GTM_VALID;
+
return 0;
}
{ "_NEC DV5800A", NULL, ATA_HORKAGE_NODMA },
{ "SAMSUNG CD-ROM SN-124", "N001", ATA_HORKAGE_NODMA },
{ "Seagate STT20000A", NULL, ATA_HORKAGE_NODMA },
- { "2GB ATA Flash Disk", "ADMA428M", ATA_HORKAGE_NODMA },
+ { " 2GB ATA Flash Disk", "ADMA428M", ATA_HORKAGE_NODMA },
/* Odd clown on sil3726/4726 PMPs */
{ "Config Disk", NULL, ATA_HORKAGE_DISABLE },
/* Devices that do not need bridging limits applied */
{ "MTRON MSP-SATA*", NULL, ATA_HORKAGE_BRIDGE_OK, },
+ { "BUFFALO HD-QSU2/R5", NULL, ATA_HORKAGE_BRIDGE_OK, },
/* Devices which aren't very happy with higher link speeds */
{ "WD My Book", NULL, ATA_HORKAGE_1_5_GBPS, },
#include <linux/delay.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
+#include <linux/dmi.h>
#define DRV_NAME "pata_atiixp"
#define DRV_VERSION "0.4.6"
ATIIXP_IDE_UDMA_MODE = 0x56
};
+static const struct dmi_system_id attixp_cable_override_dmi_table[] = {
+ {
+ /* Board has onboard PATA<->SATA converters */
+ .ident = "MSI E350DM-E33",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "MSI"),
+ DMI_MATCH(DMI_BOARD_NAME, "E350DM-E33(MS-7720)"),
+ },
+ },
+ { }
+};
+
static int atiixp_cable_detect(struct ata_port *ap)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
u8 udma;
+ if (dmi_check_system(attixp_cable_override_dmi_table))
+ return ATA_CBL_PATA40_SHORT;
+
/* Hack from drivers/ide/pci. Really we want to know how to do the
raw detection not play follow the bios mode guess */
pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ap->port_no, &udma);
unsigned int done;
unsigned flags;
#define BM_AIO_COPY_PAGES 1
+#define BM_WRITE_ALL_PAGES 2
int error;
struct kref kref;
};
if (lazy_writeout_upper_idx && i == lazy_writeout_upper_idx)
break;
if (rw & WRITE) {
- if (bm_test_page_unchanged(b->bm_pages[i])) {
+ if (!(flags & BM_WRITE_ALL_PAGES) &&
+ bm_test_page_unchanged(b->bm_pages[i])) {
dynamic_dev_dbg(DEV, "skipped bm write for idx %u\n", i);
continue;
}
return bm_rw(mdev, WRITE, 0, 0);
}
+/**
+ * drbd_bm_write_all() - Write the whole bitmap to its on disk location.
+ * @mdev: DRBD device.
+ *
+ * Will write all pages.
+ */
+int drbd_bm_write_all(struct drbd_conf *mdev) __must_hold(local)
+{
+ return bm_rw(mdev, WRITE, BM_WRITE_ALL_PAGES, 0);
+}
+
/**
* drbd_bm_lazy_write_out() - Write bitmap pages 0 to @upper_idx-1, if they have changed.
* @mdev: DRBD device.
extern int drbd_bm_write_page(struct drbd_conf *mdev, unsigned int idx) __must_hold(local);
extern int drbd_bm_read(struct drbd_conf *mdev) __must_hold(local);
extern int drbd_bm_write(struct drbd_conf *mdev) __must_hold(local);
+extern int drbd_bm_write_all(struct drbd_conf *mdev) __must_hold(local);
extern int drbd_bm_write_copy_pages(struct drbd_conf *mdev) __must_hold(local);
extern unsigned long drbd_bm_ALe_set_all(struct drbd_conf *mdev,
unsigned long al_enr);
static void md_sync_timer_fn(unsigned long data);
static int w_bitmap_io(struct drbd_conf *mdev, struct drbd_work *w, int unused);
static int w_go_diskless(struct drbd_conf *mdev, struct drbd_work *w, int unused);
+static void _tl_clear(struct drbd_conf *mdev);
MODULE_AUTHOR("Philipp Reisner <phil@linbit.com>, "
"Lars Ellenberg <lars@linbit.com>");
/* Actions operating on the disk state, also want to work on
requests that got barrier acked. */
- switch (what) {
- case fail_frozen_disk_io:
- case restart_frozen_disk_io:
- list_for_each_safe(le, tle, &mdev->barrier_acked_requests) {
- req = list_entry(le, struct drbd_request, tl_requests);
- _req_mod(req, what);
- }
- case connection_lost_while_pending:
- case resend:
- break;
- default:
- dev_err(DEV, "what = %d in _tl_restart()\n", what);
+ list_for_each_safe(le, tle, &mdev->barrier_acked_requests) {
+ req = list_entry(le, struct drbd_request, tl_requests);
+ _req_mod(req, what);
}
}
* receiver thread and the worker thread.
*/
void tl_clear(struct drbd_conf *mdev)
+{
+ spin_lock_irq(&mdev->req_lock);
+ _tl_clear(mdev);
+ spin_unlock_irq(&mdev->req_lock);
+}
+
+static void _tl_clear(struct drbd_conf *mdev)
{
struct list_head *le, *tle;
struct drbd_request *r;
- spin_lock_irq(&mdev->req_lock);
-
_tl_restart(mdev, connection_lost_while_pending);
/* we expect this list to be empty. */
memset(mdev->app_reads_hash, 0, APP_R_HSIZE*sizeof(void *));
- spin_unlock_irq(&mdev->req_lock);
}
void tl_restart(struct drbd_conf *mdev, enum drbd_req_event what)
if (ns.susp_fen) {
/* case1: The outdate peer handler is successful: */
if (os.pdsk > D_OUTDATED && ns.pdsk <= D_OUTDATED) {
- tl_clear(mdev);
if (test_bit(NEW_CUR_UUID, &mdev->flags)) {
drbd_uuid_new_current(mdev);
clear_bit(NEW_CUR_UUID, &mdev->flags);
}
spin_lock_irq(&mdev->req_lock);
+ _tl_clear(mdev);
_drbd_set_state(_NS(mdev, susp_fen, 0), CS_VERBOSE, NULL);
spin_unlock_irq(&mdev->req_lock);
}
la_size_changed && md_moved ? "size changed and md moved" :
la_size_changed ? "size changed" : "md moved");
/* next line implicitly does drbd_suspend_io()+drbd_resume_io() */
- err = drbd_bitmap_io(mdev, &drbd_bm_write,
- "size changed", BM_LOCKED_MASK);
+ err = drbd_bitmap_io(mdev, md_moved ? &drbd_bm_write_all : &drbd_bm_write,
+ "size changed", BM_LOCKED_MASK);
if (err) {
rv = dev_size_error;
goto out;
break;
case resend:
+ /* Simply complete (local only) READs. */
+ if (!(req->rq_state & RQ_WRITE) && !req->w.cb) {
+ _req_may_be_done(req, m);
+ break;
+ }
+
/* If RQ_NET_OK is already set, we got a P_WRITE_ACK or P_RECV_ACK
before the connection loss (B&C only); only P_BARRIER_ACK was missing.
Trowing them out of the TL here by pretending we got a BARRIER_ACK
req->private_bio = NULL;
}
if (rw == WRITE) {
- remote = 1;
+ /* Need to replicate writes. Unless it is an empty flush,
+ * which is better mapped to a DRBD P_BARRIER packet,
+ * also for drbd wire protocol compatibility reasons. */
+ if (unlikely(size == 0)) {
+ /* The only size==0 bios we expect are empty flushes. */
+ D_ASSERT(bio->bi_rw & REQ_FLUSH);
+ remote = 0;
+ } else
+ remote = 1;
} else {
/* READ || READA */
if (local) {
* extent. This waits for any resync activity in the corresponding
* resync extent to finish, and, if necessary, pulls in the target
* extent into the activity log, which involves further disk io because
- * of transactional on-disk meta data updates. */
- if (rw == WRITE && local && !test_bit(AL_SUSPENDED, &mdev->flags)) {
+ * of transactional on-disk meta data updates.
+ * Empty flushes don't need to go into the activity log, they can only
+ * flush data for pending writes which are already in there. */
+ if (rw == WRITE && local && size
+ && !test_bit(AL_SUSPENDED, &mdev->flags)) {
req->rq_state |= RQ_IN_ACT_LOG;
drbd_al_begin_io(mdev, sector);
}
if (rw == WRITE && _req_conflicts(req))
goto fail_conflicting;
- list_add_tail(&req->tl_requests, &mdev->newest_tle->requests);
+ /* no point in adding empty flushes to the transfer log,
+ * they are mapped to drbd barriers already. */
+ if (likely(size!=0))
+ list_add_tail(&req->tl_requests, &mdev->newest_tle->requests);
/* NOTE remote first: to get the concurrent write detection right,
* we must register the request before start of local IO. */
mdev->net_conf->on_congestion != OC_BLOCK && mdev->agreed_pro_version >= 96)
maybe_pull_ahead(mdev);
+ /* If this was a flush, queue a drbd barrier/start a new epoch.
+ * Unless the current epoch was empty anyways, or we are not currently
+ * replicating, in which case there is no point. */
+ if (unlikely(bio->bi_rw & REQ_FLUSH)
+ && mdev->newest_tle->n_writes
+ && drbd_should_do_remote(mdev->state))
+ queue_barrier(mdev);
+
spin_unlock_irq(&mdev->req_lock);
kfree(b); /* if someone else has beaten us to it... */
policy->cur = policy->min = policy->max = omap_getspeed(policy->cpu);
- if (atomic_inc_return(&freq_table_users) == 1)
+ if (!freq_table)
result = opp_init_cpufreq_table(mpu_dev, &freq_table);
if (result) {
goto fail_ck;
}
+ atomic_inc_return(&freq_table_users);
+
result = cpufreq_frequency_table_cpuinfo(policy, freq_table);
if (result)
goto fail_table;
head = ACCESS_ONCE(jrp->head);
- spin_lock_bh(&jrp->outlock);
+ spin_lock(&jrp->outlock);
sw_idx = tail = jrp->tail;
hw_idx = jrp->out_ring_read_index;
jrp->tail = tail;
}
- spin_unlock_bh(&jrp->outlock);
+ spin_unlock(&jrp->outlock);
/* Finally, execute user's callback */
usercall(dev, userdesc, userstatus, userarg);
return -EIO;
}
- spin_lock(&jrp->inplock);
+ spin_lock_bh(&jrp->inplock);
head = jrp->head;
tail = ACCESS_ONCE(jrp->tail);
if (!rd_reg32(&jrp->rregs->inpring_avail) ||
CIRC_SPACE(head, tail, JOBR_DEPTH) <= 0) {
- spin_unlock(&jrp->inplock);
+ spin_unlock_bh(&jrp->inplock);
dma_unmap_single(dev, desc_dma, desc_size, DMA_TO_DEVICE);
return -EBUSY;
}
wr_reg32(&jrp->rregs->inpring_jobadd, 1);
- spin_unlock(&jrp->inplock);
+ spin_unlock_bh(&jrp->inplock);
return 0;
}
/*
* We must wait at least 256 Pk_clk cycles between two reads of the rng.
*/
- dev->rng_wait_time = DIV_ROUND_UP(NSEC_PER_SEC, dev->pk_clk_freq) *
- 256;
+ dev->rng_wait_time = DIV_ROUND_UP_ULL(NSEC_PER_SEC,
+ dev->pk_clk_freq) * 256;
dev->rng.name = dev->name;
dev->rng.data_present = hifn_rng_data_present,
{ HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_KEYBOARD) },
- { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KONE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_ARVO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_ISKU) },
int generic_ide_suspend(struct device *dev, pm_message_t mesg)
{
- ide_drive_t *drive = dev_get_drvdata(dev);
+ ide_drive_t *drive = to_ide_device(dev);
ide_drive_t *pair = ide_get_pair_dev(drive);
ide_hwif_t *hwif = drive->hwif;
struct request *rq;
int generic_ide_resume(struct device *dev)
{
- ide_drive_t *drive = dev_get_drvdata(dev);
+ ide_drive_t *drive = to_ide_device(dev);
ide_drive_t *pair = ide_get_pair_dev(drive);
ide_hwif_t *hwif = drive->hwif;
struct request *rq;
struct rtc_device *rtcdev;
u32 imr;
void __iomem *gpbr;
+ int irq;
};
#define rtt_readl(rtc, field) \
{
struct resource *r, *r_gpbr;
struct sam9_rtc *rtc;
- int ret;
+ int ret, irq;
u32 mr;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
return -ENODEV;
}
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "failed to get interrupt resource\n");
+ return irq;
+ }
+
rtc = kzalloc(sizeof *rtc, GFP_KERNEL);
if (!rtc)
return -ENOMEM;
+ rtc->irq = irq;
+
/* platform setup code should have handled this; sigh */
if (!device_can_wakeup(&pdev->dev))
device_init_wakeup(&pdev->dev, 1);
}
/* register irq handler after we know what name we'll use */
- ret = request_irq(AT91_ID_SYS, at91_rtc_interrupt,
- IRQF_SHARED,
+ ret = request_irq(rtc->irq, at91_rtc_interrupt, IRQF_SHARED,
dev_name(&rtc->rtcdev->dev), rtc);
if (ret) {
- dev_dbg(&pdev->dev, "can't share IRQ %d?\n", AT91_ID_SYS);
+ dev_dbg(&pdev->dev, "can't share IRQ %d?\n", rtc->irq);
rtc_device_unregister(rtc->rtcdev);
goto fail_register;
}
/* disable all interrupts */
rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
- free_irq(AT91_ID_SYS, rtc);
+ free_irq(rtc->irq, rtc);
rtc_device_unregister(rtc->rtcdev);
rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
if (rtc->imr) {
if (device_may_wakeup(&pdev->dev) && (mr & AT91_RTT_ALMIEN)) {
- enable_irq_wake(AT91_ID_SYS);
+ enable_irq_wake(rtc->irq);
/* don't let RTTINC cause wakeups */
if (mr & AT91_RTT_RTTINCIEN)
rtt_writel(rtc, MR, mr & ~AT91_RTT_RTTINCIEN);
if (rtc->imr) {
if (device_may_wakeup(&pdev->dev))
- disable_irq_wake(AT91_ID_SYS);
+ disable_irq_wake(rtc->irq);
mr = rtt_readl(rtc, MR);
rtt_writel(rtc, MR, mr | rtc->imr);
}
/* Platform data */
u32 speed_hz;
unsigned fifo_size;
+ unsigned int msg_type_shift;
+ unsigned int msg_ctl_width;
/* Data buffers */
const unsigned char *tx_ptr;
msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT);
if (t->rx_buf && t->tx_buf)
- msg_ctl |= (SPI_FD_RW << SPI_MSG_TYPE_SHIFT);
+ msg_ctl |= (SPI_FD_RW << bs->msg_type_shift);
else if (t->rx_buf)
- msg_ctl |= (SPI_HD_R << SPI_MSG_TYPE_SHIFT);
+ msg_ctl |= (SPI_HD_R << bs->msg_type_shift);
else if (t->tx_buf)
- msg_ctl |= (SPI_HD_W << SPI_MSG_TYPE_SHIFT);
-
- bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL);
+ msg_ctl |= (SPI_HD_W << bs->msg_type_shift);
+
+ switch (bs->msg_ctl_width) {
+ case 8:
+ bcm_spi_writeb(bs, msg_ctl, SPI_MSG_CTL);
+ break;
+ case 16:
+ bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL);
+ break;
+ }
/* Issue the transfer */
cmd = SPI_CMD_START_IMMEDIATE;
master->transfer_one_message = bcm63xx_spi_transfer_one;
master->mode_bits = MODEBITS;
bs->speed_hz = pdata->speed_hz;
+ bs->msg_type_shift = pdata->msg_type_shift;
+ bs->msg_ctl_width = pdata->msg_ctl_width;
bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA));
bs->rx_io = (const u8 *)(bs->regs + bcm63xx_spireg(SPI_RX_DATA));
+ switch (bs->msg_ctl_width) {
+ case 8:
+ case 16:
+ break;
+ default:
+ dev_err(dev, "unsupported MSG_CTL width: %d\n",
+ bs->msg_ctl_width);
+ goto out_clk_disable;
+ }
+
/* Initialize hardware */
clk_enable(bs->clk);
bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);
switch (cmd) {
case WDIOC_GETSUPPORT:
- if (copy_to_user((void *)arg, &ident, sizeof(ident)))
- return -EFAULT;
+ return copy_to_user(p, &ident, sizeof(ident)) ? -EFAULT : 0;
case WDIOC_GETSTATUS:
return put_user(0, p);
case WDIOC_GETBOOTSTATUS:
/* XXX: something is clearing TSR */
tmp = mfspr(SPRN_TSR) & TSR_WRS(3);
/* returns CARDRESET if last reset was caused by the WDT */
- return (tmp ? WDIOF_CARDRESET : 0);
+ return put_user((tmp ? WDIOF_CARDRESET : 0), p);
case WDIOC_SETOPTIONS:
if (get_user(tmp, p))
- return -EINVAL;
+ return -EFAULT;
if (tmp == WDIOS_ENABLECARD) {
booke_wdt_ping();
break;
return 0;
}
-static void __devinit prepare_shared_info(void)
-{
-#ifdef CONFIG_KEXEC
- unsigned long addr;
- struct shared_info *hvm_shared_info;
-
- addr = alloc_xen_mmio(PAGE_SIZE);
- hvm_shared_info = ioremap(addr, PAGE_SIZE);
- memset(hvm_shared_info, 0, PAGE_SIZE);
- xen_hvm_prepare_kexec(hvm_shared_info, addr >> PAGE_SHIFT);
-#endif
-}
-
static int __devinit platform_pci_init(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
platform_mmio = mmio_addr;
platform_mmiolen = mmio_len;
- prepare_shared_info();
-
if (!xen_have_vector_callback) {
ret = xen_allocate_irq(pdev);
if (ret) {
{
unsigned int sz = sizeof(struct bio) + extra_size;
struct kmem_cache *slab = NULL;
- struct bio_slab *bslab;
+ struct bio_slab *bslab, *new_bio_slabs;
unsigned int i, entry = -1;
mutex_lock(&bio_slab_lock);
if (bio_slab_nr == bio_slab_max && entry == -1) {
bio_slab_max <<= 1;
- bio_slabs = krealloc(bio_slabs,
- bio_slab_max * sizeof(struct bio_slab),
- GFP_KERNEL);
- if (!bio_slabs)
+ new_bio_slabs = krealloc(bio_slabs,
+ bio_slab_max * sizeof(struct bio_slab),
+ GFP_KERNEL);
+ if (!new_bio_slabs)
goto out_unlock;
+ bio_slabs = new_bio_slabs;
}
if (entry == -1)
entry = bio_slab_nr++;
unsigned long nr_segs, loff_t pos)
{
struct file *file = iocb->ki_filp;
+ struct blk_plug plug;
ssize_t ret;
BUG_ON(iocb->ki_pos != pos);
+ blk_start_plug(&plug);
ret = __generic_file_aio_write(iocb, iov, nr_segs, &iocb->ki_pos);
if (ret > 0 || ret == -EIOCBQUEUED) {
ssize_t err;
if (err < 0 && ret > 0)
ret = err;
}
+ blk_finish_plug(&plug);
return ret;
}
EXPORT_SYMBOL_GPL(blkdev_aio_write);
/*
* Initialise the state of a blockdev page's buffers.
*/
-static void
+static sector_t
init_page_buffers(struct page *page, struct block_device *bdev,
sector_t block, int size)
{
block++;
bh = bh->b_this_page;
} while (bh != head);
+
+ /*
+ * Caller needs to validate requested block against end of device.
+ */
+ return end_block;
}
/*
* Create the page-cache page that contains the requested block.
*
- * This is user purely for blockdev mappings.
+ * This is used purely for blockdev mappings.
*/
-static struct page *
+static int
grow_dev_page(struct block_device *bdev, sector_t block,
- pgoff_t index, int size)
+ pgoff_t index, int size, int sizebits)
{
struct inode *inode = bdev->bd_inode;
struct page *page;
struct buffer_head *bh;
+ sector_t end_block;
+ int ret = 0; /* Will call free_more_memory() */
page = find_or_create_page(inode->i_mapping, index,
(mapping_gfp_mask(inode->i_mapping) & ~__GFP_FS)|__GFP_MOVABLE);
if (!page)
- return NULL;
+ return ret;
BUG_ON(!PageLocked(page));
if (page_has_buffers(page)) {
bh = page_buffers(page);
if (bh->b_size == size) {
- init_page_buffers(page, bdev, block, size);
- return page;
+ end_block = init_page_buffers(page, bdev,
+ index << sizebits, size);
+ goto done;
}
if (!try_to_free_buffers(page))
goto failed;
*/
spin_lock(&inode->i_mapping->private_lock);
link_dev_buffers(page, bh);
- init_page_buffers(page, bdev, block, size);
+ end_block = init_page_buffers(page, bdev, index << sizebits, size);
spin_unlock(&inode->i_mapping->private_lock);
- return page;
-
+done:
+ ret = (block < end_block) ? 1 : -ENXIO;
failed:
unlock_page(page);
page_cache_release(page);
- return NULL;
+ return ret;
}
/*
static int
grow_buffers(struct block_device *bdev, sector_t block, int size)
{
- struct page *page;
pgoff_t index;
int sizebits;
bdevname(bdev, b));
return -EIO;
}
- block = index << sizebits;
+
/* Create a page with the proper size buffers.. */
- page = grow_dev_page(bdev, block, index, size);
- if (!page)
- return 0;
- unlock_page(page);
- page_cache_release(page);
- return 1;
+ return grow_dev_page(bdev, block, index, size, sizebits);
}
static struct buffer_head *
__getblk_slow(struct block_device *bdev, sector_t block, int size)
{
- int ret;
- struct buffer_head *bh;
-
/* Size must be multiple of hard sectorsize */
if (unlikely(size & (bdev_logical_block_size(bdev)-1) ||
(size < 512 || size > PAGE_SIZE))) {
return NULL;
}
-retry:
- bh = __find_get_block(bdev, block, size);
- if (bh)
- return bh;
+ for (;;) {
+ struct buffer_head *bh;
+ int ret;
- ret = grow_buffers(bdev, block, size);
- if (ret == 0) {
- free_more_memory();
- goto retry;
- } else if (ret > 0) {
bh = __find_get_block(bdev, block, size);
if (bh)
return bh;
+
+ ret = grow_buffers(bdev, block, size);
+ if (ret < 0)
+ return NULL;
+ if (ret == 0)
+ free_more_memory();
}
- return NULL;
}
/*
* which corresponds to the passed block_device, block and size. The
* returned buffer has its reference count incremented.
*
- * __getblk() cannot fail - it just keeps trying. If you pass it an
- * illegal block number, __getblk() will happily return a buffer_head
- * which represents the non-existent block. Very weird.
- *
* __getblk() will lock up the machine if grow_dev_page's try_to_free_buffers()
* attempt is failing. FIXME, perhaps?
*/
unsigned long user_addr;
size_t bytes;
struct buffer_head map_bh = { 0, };
+ struct blk_plug plug;
if (rw & WRITE)
rw = WRITE_ODIRECT;
PAGE_SIZE - user_addr / PAGE_SIZE);
}
+ blk_start_plug(&plug);
+
for (seg = 0; seg < nr_segs; seg++) {
user_addr = (unsigned long)iov[seg].iov_base;
sdio.size += bytes = iov[seg].iov_len;
if (sdio.bio)
dio_bio_submit(dio, &sdio);
+ blk_finish_plug(&plug);
+
/*
* It is possible that, we return short IO due to end of file.
* In that case, we need to release all the pages we got hold on.
BUG_ON(!mutex_is_locked(&journal->j_checkpoint_mutex));
spin_lock(&journal->j_state_lock);
+ /* Is it already empty? */
+ if (sb->s_start == 0) {
+ spin_unlock(&journal->j_state_lock);
+ return;
+ }
jbd_debug(1, "JBD: Marking journal as empty (seq %d)\n",
journal->j_tail_sequence);
if (clp->cl_minorversion == 0) {
if (!clp->cl_cred.cr_principal &&
- (clp->cl_flavor >= RPC_AUTH_GSS_KRB5))
+ (clp->cl_cred.cr_flavor >= RPC_AUTH_GSS_KRB5))
return -EINVAL;
args.client_name = clp->cl_cred.cr_principal;
args.prognumber = conn->cb_prog,
args.protocol = XPRT_TRANSPORT_TCP;
- args.authflavor = clp->cl_flavor;
+ args.authflavor = clp->cl_cred.cr_flavor;
clp->cl_cb_ident = conn->cb_ident;
} else {
if (!conn->cb_xprt)
nfs4_verifier cl_verifier; /* generated by client */
time_t cl_time; /* time of last lease renewal */
struct sockaddr_storage cl_addr; /* client ipaddress */
- u32 cl_flavor; /* setclientid pseudoflavor */
struct svc_cred cl_cred; /* setclientid principal */
clientid_t cl_clientid; /* generated by server */
nfs4_verifier cl_confirm; /* generated by server */
goto out;
}
- down_read(&sb_dqopt(inode->i_sb)->dqptr_sem);
for (cnt = 0; cnt < MAXQUOTAS; cnt++)
warn[cnt].w_type = QUOTA_NL_NOWARN;
+ down_read(&sb_dqopt(inode->i_sb)->dqptr_sem);
spin_lock(&dq_data_lock);
for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
if (!dquots[cnt])
else if (bitmap == 0)
block = (REISERFS_DISK_OFFSET_IN_BYTES >> sb->s_blocksize_bits) + 1;
- reiserfs_write_unlock(sb);
bh = sb_bread(sb, block);
- reiserfs_write_lock(sb);
if (bh == NULL)
reiserfs_warning(sb, "sh-2029: %s: bitmap block (#%u) "
"reading failed", __func__, block);
;
}
out:
+ reiserfs_write_unlock_once(inode->i_sb, depth);
clear_inode(inode); /* note this must go after the journal_end to prevent deadlock */
dquot_drop(inode);
inode->i_blocks = 0;
- reiserfs_write_unlock_once(inode->i_sb, depth);
return;
no_delete:
#define ubifs_dbg_msg(type, fmt, ...) \
pr_debug("UBIFS DBG " type ": " fmt "\n", ##__VA_ARGS__)
-#define DBG_KEY_BUF_LEN 32
+#define DBG_KEY_BUF_LEN 48
#define ubifs_dbg_msg_key(type, key, fmt, ...) do { \
char __tmp_key_buf[DBG_KEY_BUF_LEN]; \
pr_debug("UBIFS DBG " type ": " fmt "%s\n", ##__VA_ARGS__, \
return 0;
out_err:
- ubifs_lpt_free(c, 0);
+ if (wr)
+ ubifs_lpt_free(c, 1);
+ if (rd)
+ ubifs_lpt_free(c, 0);
return err;
}
corrupted_rescan:
/* Re-scan the corrupted data with verbose messages */
- ubifs_err("corruptio %d", ret);
+ ubifs_err("corruption %d", ret);
ubifs_scan_a_node(c, buf, len, lnum, offs, 1);
corrupted:
ubifs_scanned_corruption(c, lnum, offs, buf);
c->replaying = 1;
lnum = c->ltail_lnum = c->lhead_lnum;
- lnum = UBIFS_LOG_LNUM;
do {
err = replay_log_leb(c, lnum, 0, c->sbuf);
if (err == 1)
if (err)
goto out;
lnum = ubifs_next_log_lnum(c, lnum);
- } while (lnum != UBIFS_LOG_LNUM);
+ } while (lnum != c->ltail_lnum);
err = replay_buds(c);
if (err)
*
* This function mounts UBIFS file system. Returns zero in case of success and
* a negative error code in case of failure.
- *
- * Note, the function does not de-allocate resources it it fails half way
- * through, and the caller has to do this instead.
*/
static int mount_ubifs(struct ubifs_info *c)
{
if (err)
return err;
down_write(&iinfo->i_data_sem);
- } else
+ } else {
iinfo->i_lenAlloc = newsize;
+ goto set_size;
+ }
}
err = udf_extend_file(inode, newsize);
if (err) {
up_write(&iinfo->i_data_sem);
return err;
}
+set_size:
truncate_setsize(inode, newsize);
up_write(&iinfo->i_data_sem);
} else {
udf_err(sb, "error loading logical volume descriptor: "
"Partition table too long (%u > %lu)\n", table_len,
sb->s_blocksize - sizeof(*lvd));
+ ret = 1;
goto out_bh;
}
UDF_ID_SPARABLE,
strlen(UDF_ID_SPARABLE))) {
if (udf_load_sparable_map(sb, map,
- (struct sparablePartitionMap *)gpm) < 0)
+ (struct sparablePartitionMap *)gpm) < 0) {
+ ret = 1;
goto out_bh;
+ }
} else if (!strncmp(upm2->partIdent.ident,
UDF_ID_METADATA,
strlen(UDF_ID_METADATA))) {
if (!silent)
pr_notice("Rescanning with blocksize %d\n",
UDF_DEFAULT_BLOCKSIZE);
+ brelse(sbi->s_lvid_bh);
+ sbi->s_lvid_bh = NULL;
uopt.blocksize = UDF_DEFAULT_BLOCKSIZE;
ret = udf_load_vrs(sb, &uopt, silent, &fileset);
}
* used by the fstrim application. In the end it really doesn't
* matter as trimming blocks is an advisory interface.
*/
+ if (range.start >= XFS_FSB_TO_B(mp, mp->m_sb.sb_dblocks) ||
+ range.minlen > XFS_FSB_TO_B(mp, XFS_ALLOC_AG_MAX_USABLE(mp)))
+ return -XFS_ERROR(EINVAL);
+
start = BTOBB(range.start);
end = start + BTOBBT(range.len) - 1;
minlen = BTOBB(max_t(u64, granularity, range.minlen));
- if (XFS_BB_TO_FSB(mp, start) >= mp->m_sb.sb_dblocks)
- return -XFS_ERROR(EINVAL);
if (end > XFS_FSB_TO_BB(mp, mp->m_sb.sb_dblocks) - 1)
end = XFS_FSB_TO_BB(mp, mp->m_sb.sb_dblocks)- 1;
if (!pag->pagi_freecount && !okalloc)
goto nextag;
+ /*
+ * Then read in the AGI buffer and recheck with the AGI buffer
+ * lock held.
+ */
error = xfs_ialloc_read_agi(mp, tp, agno, &agbp);
if (error)
goto out_error;
- /*
- * Once the AGI has been read in we have to recheck
- * pagi_freecount with the AGI buffer lock held.
- */
if (pag->pagi_freecount) {
xfs_perag_put(pag);
goto out_alloc;
}
- if (!okalloc) {
- xfs_trans_brelse(tp, agbp);
- goto nextag;
- }
+ if (!okalloc)
+ goto nextag_relse_buffer;
+
error = xfs_ialloc_ag_alloc(tp, agbp, &ialloced);
if (error) {
return 0;
}
+nextag_relse_buffer:
+ xfs_trans_brelse(tp, agbp);
nextag:
xfs_perag_put(pag);
if (++agno == mp->m_sb.sb_agcount)
xfs_buf_t *bp; /* block buffer, result */
xfs_inode_t *ip; /* bitmap or summary inode */
xfs_bmbt_irec_t map;
- int nmap;
+ int nmap = 1;
int error; /* error value */
ip = issum ? mp->m_rsumip : mp->m_rbmip;
* it already be started by driver.
*/
#define RQ_NOMERGE_FLAGS \
- (REQ_NOMERGE | REQ_STARTED | REQ_SOFTBARRIER | REQ_FLUSH | REQ_FUA)
+ (REQ_NOMERGE | REQ_STARTED | REQ_SOFTBARRIER | REQ_FLUSH | REQ_FUA | REQ_DISCARD)
#define rq_mergeable(rq) \
(!((rq)->cmd_flags & RQ_NOMERGE_FLAGS) && \
(((rq)->cmd_flags & REQ_DISCARD) || \
extern struct backing_dev_info *blk_get_backing_dev_info(struct block_device *bdev);
extern int blk_rq_map_sg(struct request_queue *, struct request *, struct scatterlist *);
+extern int blk_bio_map_sg(struct request_queue *q, struct bio *bio,
+ struct scatterlist *sglist);
extern void blk_dump_rq_flags(struct request *, char *);
extern long nr_blockdev_pages(void);
& (lim->discard_granularity - 1);
}
+static inline int bdev_discard_alignment(struct block_device *bdev)
+{
+ struct request_queue *q = bdev_get_queue(bdev);
+
+ if (bdev != bdev->bd_contains)
+ return bdev->bd_part->discard_alignment;
+
+ return q->limits.discard_alignment;
+}
+
static inline unsigned int queue_discard_zeroes_data(struct request_queue *q)
{
if (q->limits.max_discard_sectors && q->limits.discard_zeroes_data == 1)
#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
void cpuidle_coupled_parallel_barrier(struct cpuidle_device *dev, atomic_t *a);
+#else
+static inline void cpuidle_coupled_parallel_barrier(struct cpuidle_device *dev, atomic_t *a)
+{
+}
#endif
/******************************
typedef union ktime ktime_t; /* Kill this */
-#define KTIME_MAX ((s64)~((u64)1 << 63))
-#if (BITS_PER_LONG == 64)
-# define KTIME_SEC_MAX (KTIME_MAX / NSEC_PER_SEC)
-#else
-# define KTIME_SEC_MAX LONG_MAX
-#endif
-
/*
* ktime_t definitions when using the 64-bit scalar representation:
*/
#define MV643XX_ETH_SIZE_REG_4 0x2224
#define MV643XX_ETH_BASE_ADDR_ENABLE_REG 0x2290
+#define MV643XX_TX_CSUM_DEFAULT_LIMIT 0
+
struct mv643xx_eth_shared_platform_data {
struct mbus_dram_target_info *dram;
struct platform_device *shared_smi;
return ts_delta;
}
+#define KTIME_MAX ((s64)~((u64)1 << 63))
+#if (BITS_PER_LONG == 64)
+# define KTIME_SEC_MAX (KTIME_MAX / NSEC_PER_SEC)
+#else
+# define KTIME_SEC_MAX LONG_MAX
+#endif
+
/*
* Returns true if the timespec is norm, false if denorm:
*/
-#define timespec_valid(ts) \
- (((ts)->tv_sec >= 0) && (((unsigned long) (ts)->tv_nsec) < NSEC_PER_SEC))
+static inline bool timespec_valid(const struct timespec *ts)
+{
+ /* Dates before 1970 are bogus */
+ if (ts->tv_sec < 0)
+ return false;
+ /* Can't have more nanoseconds then a second */
+ if ((unsigned long)ts->tv_nsec >= NSEC_PER_SEC)
+ return false;
+ /* Disallow values that could overflow ktime_t */
+ if ((unsigned long long)ts->tv_sec >= KTIME_SEC_MAX)
+ return false;
+ return true;
+}
extern void read_persistent_clock(struct timespec *ts);
extern void read_boot_clock(struct timespec *ts);
void xen_irq_resume(void);
-void xen_hvm_prepare_kexec(struct shared_info *sip, unsigned long pfn);
-
/* Clear an irq's pending state, in preparation for polling on it */
void xen_clear_irq_pending(int irq);
void xen_set_irq_pending(int irq);
if (retval)
goto out;
- if (file && uprobe_mmap(tmp))
- goto out;
+ if (file)
+ uprobe_mmap(tmp);
}
/* a new mm has just been created */
arch_dup_mmap(oldmm, mm);
{
tk->xtime_sec += ts->tv_sec;
tk->xtime_nsec += (u64)ts->tv_nsec << tk->shift;
+ tk_normalize_xtime(tk);
}
static void tk_set_wall_to_mono(struct timekeeper *tk, struct timespec wtm)
tk->xtime_nsec += cycle_delta * tk->mult;
/* If arch requires, add in gettimeoffset() */
- tk->xtime_nsec += arch_gettimeoffset() << tk->shift;
+ tk->xtime_nsec += (u64)arch_gettimeoffset() << tk->shift;
tk_normalize_xtime(tk);
struct timespec ts_delta, xt;
unsigned long flags;
- if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
+ if (!timespec_valid(tv))
return -EINVAL;
write_seqlock_irqsave(&tk->lock, flags);
{
struct timekeeper *tk = &timekeeper;
unsigned long flags;
+ struct timespec tmp;
+ int ret = 0;
if ((unsigned long)ts->tv_nsec >= NSEC_PER_SEC)
return -EINVAL;
timekeeping_forward_now(tk);
+ /* Make sure the proposed value is valid */
+ tmp = timespec_add(tk_xtime(tk), *ts);
+ if (!timespec_valid(&tmp)) {
+ ret = -EINVAL;
+ goto error;
+ }
tk_xtime_add(tk, ts);
tk_set_wall_to_mono(tk, timespec_sub(tk->wall_to_monotonic, *ts));
+error: /* even if we error out, we forwarded the time, so call update */
timekeeping_update(tk, true);
write_sequnlock_irqrestore(&tk->lock, flags);
/* signal hrtimers about time change */
clock_was_set();
- return 0;
+ return ret;
}
EXPORT_SYMBOL(timekeeping_inject_offset);
struct timespec now, boot, tmp;
read_persistent_clock(&now);
+ if (!timespec_valid(&now)) {
+ pr_warn("WARNING: Persistent clock returned invalid value!\n"
+ " Check your CMOS/BIOS settings.\n");
+ now.tv_sec = 0;
+ now.tv_nsec = 0;
+ }
+
read_boot_clock(&boot);
+ if (!timespec_valid(&boot)) {
+ pr_warn("WARNING: Boot clock returned invalid value!\n"
+ " Check your CMOS/BIOS settings.\n");
+ boot.tv_sec = 0;
+ boot.tv_nsec = 0;
+ }
seqlock_init(&tk->lock);
offset = (clock->read(clock) - clock->cycle_last) & clock->mask;
#endif
+ /* Check if there's really nothing to do */
+ if (offset < tk->cycle_interval)
+ goto out;
+
/*
* With NO_HZ we may have to accumulate many cycle_intervals
* (think "ticks") worth of time at once. To do this efficiently,
* the vsyscall implementations are converted to use xtime_nsec
* (shifted nanoseconds), this can be killed.
*/
- remainder = tk->xtime_nsec & ((1 << tk->shift) - 1);
+ remainder = tk->xtime_nsec & ((1ULL << tk->shift) - 1);
tk->xtime_nsec -= remainder;
- tk->xtime_nsec += 1 << tk->shift;
+ tk->xtime_nsec += 1ULL << tk->shift;
tk->ntp_error += remainder << tk->ntp_error_shift;
/*
int size;
syscall_nr = syscall_get_nr(current, regs);
+ if (syscall_nr < 0)
+ return;
if (!test_bit(syscall_nr, enabled_perf_enter_syscalls))
return;
int size;
syscall_nr = syscall_get_nr(current, regs);
+ if (syscall_nr < 0)
+ return;
if (!test_bit(syscall_nr, enabled_perf_exit_syscalls))
return;
retval = filemap_write_and_wait_range(mapping, pos,
pos + iov_length(iov, nr_segs) - 1);
if (!retval) {
- struct blk_plug plug;
-
- blk_start_plug(&plug);
retval = mapping->a_ops->direct_IO(READ, iocb,
iov, pos, nr_segs);
- blk_finish_plug(&plug);
}
if (retval > 0) {
*ppos = pos + retval;
{
struct file *file = iocb->ki_filp;
struct inode *inode = file->f_mapping->host;
- struct blk_plug plug;
ssize_t ret;
BUG_ON(iocb->ki_pos != pos);
sb_start_write(inode->i_sb);
mutex_lock(&inode->i_mutex);
- blk_start_plug(&plug);
ret = __generic_file_aio_write(iocb, iov, nr_segs, &iocb->ki_pos);
mutex_unlock(&inode->i_mutex);
if (err < 0 && ret > 0)
ret = err;
}
- blk_finish_plug(&plug);
sb_end_write(inode->i_sb);
return ret;
}
} else if ((flags & MAP_POPULATE) && !(flags & MAP_NONBLOCK))
make_pages_present(addr, addr + len);
- if (file && uprobe_mmap(vma))
- /* matching probes but cannot insert */
- goto unmap_and_free_vma;
+ if (file)
+ uprobe_mmap(vma);
return addr;
*/
void svc_xprt_enqueue(struct svc_xprt *xprt)
{
- struct svc_serv *serv = xprt->xpt_server;
struct svc_pool *pool;
struct svc_rqst *rqstp;
int cpu;
rqstp, rqstp->rq_xprt);
rqstp->rq_xprt = xprt;
svc_xprt_get(xprt);
- rqstp->rq_reserved = serv->sv_max_mesg;
- atomic_add(rqstp->rq_reserved, &xprt->xpt_reserved);
pool->sp_stats.threads_woken++;
wake_up(&rqstp->rq_wait);
} else {
if (xprt) {
rqstp->rq_xprt = xprt;
svc_xprt_get(xprt);
- rqstp->rq_reserved = serv->sv_max_mesg;
- atomic_add(rqstp->rq_reserved, &xprt->xpt_reserved);
/* As there is a shortage of threads and this request
* had to be queued, don't allow the thread to wait so
else
len = xprt->xpt_ops->xpo_recvfrom(rqstp);
dprintk("svc: got len=%d\n", len);
+ rqstp->rq_reserved = serv->sv_max_mesg;
+ atomic_add(rqstp->rq_reserved, &xprt->xpt_reserved);
}
svc_xprt_received(xprt);
/* Grab mutex to serialize outgoing data. */
mutex_lock(&xprt->xpt_mutex);
- if (test_bit(XPT_DEAD, &xprt->xpt_flags))
+ if (test_bit(XPT_DEAD, &xprt->xpt_flags)
+ || test_bit(XPT_CLOSE, &xprt->xpt_flags))
len = -ENOTCONN;
else
len = xprt->xpt_ops->xpo_sendto(rqstp);
if (len >= 0)
svsk->sk_tcplen += len;
if (len != want) {
+ svc_tcp_save_pages(svsk, rqstp);
if (len < 0 && len != -EAGAIN)
goto err_other;
- svc_tcp_save_pages(svsk, rqstp);
dprintk("svc: incomplete TCP record (%d of %d)\n",
svsk->sk_tcplen, svsk->sk_reclen);
goto err_noclose;
util/evlist.c
util/evsel.c
util/cpumap.c
+util/hweight.c
util/thread_map.c
util/util.c
util/xyarray.c
util/cgroup.c
util/debugfs.c
+util/rblist.c
util/strlist.c
../../lib/rbtree.c
projects / linux-2.6-microblaze.git / commitdiff