staging: r8188eu: remove unused fields from struct hal_data_8188e

Remove unused fields from struct hal_data_8188e.

Acked-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220101084937.3411-6-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/r8188eu/include/rtl8188e_hal.h b/drivers/staging/r8188eu/include/rtl8188e_hal.h
index 40b3db3..2ce42d6 100644 (file)
--- a/drivers/staging/r8188eu/include/rtl8188e_hal.h
+++ b/drivers/staging/r8188eu/include/rtl8188e_hal.h
@@ -175,15 +175,9 @@ struct hal_data_8188e {
 
        u16     BasicRateSet;
 
-       /*  EEPROM setting. */
-       u16     EEPROMSVID;
-       u16     EEPROMSDID;
        u8      EEPROMRegulatory;
-
        u8      EEPROMThermalMeter;
 
-       bool    EepromOrEfuse;
-
        u8      Index24G_CCK_Base[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
        u8      Index24G_BW40_Base[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
        /* If only one tx, only BW20 and OFDM are used. */
@@ -192,11 +186,6 @@ struct hal_data_8188e {
        s8      BW20_24G_Diff[RF_PATH_MAX][MAX_TX_COUNT];
        s8      BW40_24G_Diff[RF_PATH_MAX][MAX_TX_COUNT];
 
-       u8      TxPwrLevelCck[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
-       /*  For HT 40MHZ pwr */
-       u8      TxPwrLevelHT40_1S[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
-       /*  For HT 40MHZ pwr */
-       u8      TxPwrLevelHT40_2S[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
        /*  HT 20<->40 Pwr diff */
        u8      TxPwrHt20Diff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
        /*  For HT<->legacy pwr diff */
@@ -205,7 +194,6 @@ struct hal_data_8188e {
        u8      PwrGroupHT20[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
        u8      PwrGroupHT40[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
 
-       u8      LegacyHTTxPowerDiff;/*  Legacy to HT rate power diff */
        /*  The current Tx Power Level */
        u8      CurrentCckTxPwrIdx;
        u8      CurrentOfdm24GTxPwrIdx;
@@ -213,21 +201,12 @@ struct hal_data_8188e {
        u8      CurrentBW4024GTxPwrIdx;
 
        /*  Read/write are allow for following hardware information variables */
-       u8      framesync;
-       u32     framesyncC34;
-       u8      framesyncMonitor;
-       u8      DefaultInitialGain[4];
        u8      pwrGroupCnt;
        u32     MCSTxPowerLevelOriginalOffset[MAX_PG_GROUP][16];
-       u32     CCKTxPowerLevelOriginalOffset;
 
        u8      CrystalCap;
-       u32     AntennaTxPath;                  /*  Antenna path Tx */
-       u32     AntennaRxPath;                  /*  Antenna path Rx */
        u8      ExternalPA;
 
-       u8      b1x1RecvCombine;        /*  for 1T1R receive combining */
-
        u32     AcParam_BE; /* Original parameter for BE, use for EDCA turbo. */
 
        struct bb_reg_def PHYRegDef[2]; /* Radio A/B */
@@ -254,17 +233,9 @@ struct hal_data_8188e {
        u8      FwRsvdPageStartOffset; /* Reserve page start offset except
                                        *  beacon in TxQ. */
 
-       /*  2010/08/09 MH Add CU power down mode. */
-       bool            pwrdown;
-
        u8      OutEpQueueSel;
        u8      OutEpNumber;
 
-       /*  2010/11/22 MH Add for slim combo debug mode selective. */
-       /*  This is used for fix the drawback of CU TSMC-A/UMC-A cut.
-        * HW auto suspend ability. Close BT clock. */
-       bool            SlimComboDbg;
-
        u16     EfuseUsedBytes;
 
        struct P2P_PS_Offload_t p2p_ps_offload;
@@ -280,7 +251,6 @@ struct hal_data_8188e {
        u8      C2hArray[16];
        u8      UsbTxAggMode;
        u8      UsbTxAggDescNum;
-       u32     MaxUsbRxAggBlock;
 
        enum usb_rx_agg_mode UsbRxAggMode;
        u8      UsbRxAggBlockCount;     /*  USB Block count. Block size is