ARM: dts: omap: Add missing #phy-cells to usb-nop-xceiv

"usb-nop-xceiv" is using the phy binding, but is missing #phy-cells
property. This is probably because the binding was the precursor to the phy
binding.

Fixes the following warning in OMAP dts files:

Warning (phys_property): Missing property '#phy-cells' in node ...

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: "Benoît Cousson" <bcousson@baylibre.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Enric Balletbo i Serra <eballetbo@gmail.com>
Cc: Javier Martinez Canillas <javier@dowhile0.org>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi
index 26cce4d..4a79ce8 100644 (file)
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -33,6 +33,7 @@
        hsusb2_phy: hsusb2_phy {
                compatible = "usb-nop-xceiv";
                reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* gpio_4 */
+               #phy-cells = <0>;
        };
 };
 

diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 683b96a..0349fcc 100644 (file)
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -90,6 +90,7 @@
                compatible = "usb-nop-xceiv";
                reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
                vcc-supply = <&hsusb2_power>;
+               #phy-cells = <0>;
        };
 
        tfp410: encoder0 {

diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 4d2eaf8..3ca8991 100644 (file)
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -64,6 +64,7 @@
                compatible = "usb-nop-xceiv";
                reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>;      /* gpio_147 */
                vcc-supply = <&hsusb2_power>;
+               #phy-cells = <0>;
        };
 
        sound {

diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
index fccd538..08533fc 100644 (file)
--- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -42,12 +42,14 @@
        hsusb1_phy: hsusb1_phy {
                compatible = "usb-nop-xceiv";
                vcc-supply = <&hsusb1_power>;
+               #phy-cells = <0>;
        };
 
        /* HS USB Host PHY on PORT 2 */
        hsusb2_phy: hsusb2_phy {
                compatible = "usb-nop-xceiv";
                vcc-supply = <&hsusb2_power>;
+               #phy-cells = <0>;
        };
 
        ads7846reg: ads7846-reg {

diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi
index ff35803..26badcc 100644 (file)
--- a/arch/arm/boot/dts/omap3-evm-common.dtsi
+++ b/arch/arm/boot/dts/omap3-evm-common.dtsi
@@ -28,6 +28,7 @@
                compatible = "usb-nop-xceiv";
                reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */
                vcc-supply = <&hsusb2_power>;
+               #phy-cells = <0>;
        };
 
        leds {

diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 4504908..3dc56fb 100644 (file)
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -120,6 +120,7 @@
        hsusb2_phy: hsusb2_phy {
                compatible = "usb-nop-xceiv";
                reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+               #phy-cells = <0>;
        };
 
        tv0: connector {

diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi
index 667f962..ecbec23 100644 (file)
--- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi
+++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi
@@ -58,6 +58,7 @@
                compatible = "usb-nop-xceiv";
                reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */
                vcc-supply = <&hsusb1_power>;
+               #phy-cells = <0>;
        };
 
        tfp410: encoder {

diff --git a/arch/arm/boot/dts/omap3-igep0030-common.dtsi b/arch/arm/boot/dts/omap3-igep0030-common.dtsi
index e94d942..443f717 100644 (file)
--- a/arch/arm/boot/dts/omap3-igep0030-common.dtsi
+++ b/arch/arm/boot/dts/omap3-igep0030-common.dtsi
@@ -37,6 +37,7 @@
        hsusb2_phy: hsusb2_phy {
                compatible = "usb-nop-xceiv";
                reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;              /* gpio_54 */
+               #phy-cells = <0>;
        };
 };
 

diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index fa611a5..a87c0b6 100644 (file)
--- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -51,6 +51,7 @@
        hsusb1_phy: hsusb1_phy {
                compatible = "usb-nop-xceiv";
                vcc-supply = <&reg_vcc3>;
+               #phy-cells = <0>;
        };
 };
 

diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi
index f25e158..ac141fc 100644 (file)
--- a/arch/arm/boot/dts/omap3-overo-base.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-base.dtsi
@@ -51,6 +51,7 @@
                compatible = "usb-nop-xceiv";
                reset-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;      /* gpio_183 */
                vcc-supply = <&hsusb2_power>;
+               #phy-cells = <0>;
        };
 
        /* Regulator to trigger the nPoweron signal of the Wifi module */

diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi
index 53e007a..cd53dc6 100644 (file)
--- a/arch/arm/boot/dts/omap3-pandora-common.dtsi
+++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi
@@ -205,6 +205,7 @@
                compatible = "usb-nop-xceiv";
                reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; /* GPIO_16 */
                vcc-supply = <&vaux2>;
+               #phy-cells = <0>;
        };
 
        /* HS USB Host VBUS supply

diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi
index 9a601d1..6f5bd02 100644 (file)
--- a/arch/arm/boot/dts/omap3-tao3530.dtsi
+++ b/arch/arm/boot/dts/omap3-tao3530.dtsi
@@ -46,6 +46,7 @@
                compatible = "usb-nop-xceiv";
                reset-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;       /* gpio_162 */
                vcc-supply = <&hsusb2_power>;
+               #phy-cells = <0>;
        };
 
        sound {

diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
index 8b93d37..24a463f 100644 (file)
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -73,6 +73,7 @@
        /* HS USB Host PHY on PORT 1 */
        hsusb1_phy: hsusb1_phy {
                compatible = "usb-nop-xceiv";
+               #phy-cells = <0>;
        };
 
        /* LCD regulator from sw5 source */

diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/omap4-duovero.dtsi
index 6e6810c..eb123b2 100644 (file)
--- a/arch/arm/boot/dts/omap4-duovero.dtsi
+++ b/arch/arm/boot/dts/omap4-duovero.dtsi
@@ -43,6 +43,7 @@
        hsusb1_phy: hsusb1_phy {
                compatible = "usb-nop-xceiv";
                reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;      /* gpio_62 */
+               #phy-cells = <0>;
 
                pinctrl-names = "default";
                pinctrl-0 = <&hsusb1phy_pins>;

diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 2b48e51..83b3168 100644 (file)
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -85,6 +85,7 @@
        hsusb1_phy: hsusb1_phy {
                compatible = "usb-nop-xceiv";
                reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;   /* gpio_62 */
+               #phy-cells = <0>;
                vcc-supply = <&hsusb1_power>;
                clocks = <&auxclk3_ck>;
                clock-names = "main_clk";

diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi
index 6500bfc..10fce28 100644 (file)
--- a/arch/arm/boot/dts/omap4-var-som-om44.dtsi
+++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi
@@ -44,6 +44,7 @@
 
                reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>; /* gpio 177 */
                vcc-supply = <&vbat>;
+               #phy-cells = <0>;
 
                clocks = <&auxclk3_ck>;
                clock-names = "main_clk";

diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index 7824b26..d9ca403 100644 (file)
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -69,12 +69,14 @@
                clocks = <&auxclk1_ck>;
                clock-names = "main_clk";
                clock-frequency = <19200000>;
+               #phy-cells = <0>;
        };
 
        /* HS USB Host PHY on PORT 3 */
        hsusb3_phy: hsusb3_phy {
                compatible = "usb-nop-xceiv";
                reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
+               #phy-cells = <0>;
        };
 
        tpd12s015: encoder {

diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts
index 552a5c4..73fcdda 100644 (file)
--- a/arch/arm/boot/dts/omap5-cm-t54.dts
+++ b/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -62,12 +62,14 @@
        hsusb2_phy: hsusb2_phy {
                compatible = "usb-nop-xceiv";
                reset-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; /* gpio3_76 HUB_RESET */
+               #phy-cells = <0>;
        };
 
        /* HS USB Host PHY on PORT 3 */
        hsusb3_phy: hsusb3_phy {
                compatible = "usb-nop-xceiv";
                reset-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; /* gpio3_83 ETH_RESET */
+               #phy-cells = <0>;
        };
 
        leds {