static void at91_mci_enable(struct at91mci_host *host)
 {
        at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIEN);
-       at91_mci_write(host, AT91_MCI_IDR, 0xFFFFFFFF);
+       at91_mci_write(host, AT91_MCI_IDR, 0xffffffff);
        at91_mci_write(host, AT91_MCI_DTOR, AT91_MCI_DTOMUL_1M | AT91_MCI_DTOCYC);
-       at91_mci_write(host, AT91_MCI_MR, 0x834A);
-       at91_mci_write(host, AT91_MCI_SDCR, 0x0);
+       at91_mci_write(host, AT91_MCI_MR, AT91_MCI_PDCMODE | 0x34a);
+       at91_mci_write(host, AT91_MCI_SDCR, 0);
 }
 
 /*
        /*
         * Set the arguments and send the command
         */
-       pr_debug("Sending command %d as %08X, arg = %08X, blocks = %d, length = %d (MR = %08lX)\n",
+       pr_debug("Sending command %d as %08X, arg = %08X, blocks = %d, length = %d (MR = %08X)\n",
                cmd->opcode, cmdr, cmd->arg, blocks, block_length, at91_mci_read(host, AT91_MCI_MR));
 
        if (!data) {
        int_status = at91_mci_read(host, AT91_MCI_SR);
        int_mask = at91_mci_read(host, AT91_MCI_IMR);
        
-       pr_debug("MCI irq: status = %08X, %08lX, %08lX\n", int_status, int_mask,
+       pr_debug("MCI irq: status = %08X, %08X, %08X\n", int_status, int_mask,
                int_status & int_mask);
        
        int_status = int_status & int_mask;
 #ifdef SUPPORT_4WIRE
                mmc->caps |= MMC_CAP_4_BIT_DATA;
 #else
-               printk("MMC: 4 wire bus mode not supported by this driver - using 1 wire\n");
+               printk("AT91 MMC: 4 wire bus mode not supported by this driver - using 1 wire\n");
 #endif
        }
 
        host->irq = platform_get_irq(pdev, 0);
        ret = request_irq(host->irq, at91_mci_irq, IRQF_SHARED, DRIVER_NAME, host);
        if (ret) {
-               printk(KERN_ERR "Failed to request MCI interrupt\n");
+               printk(KERN_ERR "AT91 MMC: Failed to request MCI interrupt\n");
                clk_disable(host->mci_clk);
                clk_put(host->mci_clk);
                mmc_free_host(mmc);
                ret = request_irq(host->board->det_pin, at91_mmc_det_irq,
                                0, DRIVER_NAME, host);
                if (ret)
-                       printk(KERN_ERR "couldn't allocate MMC detect irq\n");
+                       printk(KERN_ERR "AT91 MMC: Couldn't allocate MMC detect irq\n");
        }
 
-       pr_debug(KERN_INFO "Added MCI driver\n");
+       pr_debug("Added MCI driver\n");
 
        return 0;
 }