S: England
N: Chris Wright
-E: chrisw@osdl.org
+E: chrisw@sous-sol.org
D: hacking on LSM framework and security modules.
-S: c/o OSDL
-S: 12725 SW Millikan Way, Suite 400
-S: Beaverton, OR 97005
+S: Portland, OR
S: USA
N: Michal Wronski
If you have problems with this please do ask on the mailing list.
--
-Authors: Richard Walker, Jamie Honan, Michael Hunold, Manu Abraham
+Authors: Richard Walker,
+ Jamie Honan,
+ Michael Hunold,
+ Manu Abraham,
+ Michael Krufky
when a file system has been mounted or unmounted. Userspace should
poll the /proc/mounts file instead to detect this properly.
Who: Greg Kroah-Hartman <gregkh@suse.de>
+
+---------------------------
+
+What: Support for NEC DDB5074 and DDB5476 evaluation boards.
+When: June 2006
+Why: Board specific code doesn't build anymore since ~2.6.0 and no
+ users have complained indicating there is no more need for these
+ boards. This should really be considered a last call.
+Who: Ralf Baechle <ralf@linux-mips.org>
timesource is not avalible, it defaults to PIT.
Format: { pit | tsc | cyclone | pmtmr }
+ disable_8254_timer
+ enable_8254_timer
+ [IA32/X86_64] Disable/Enable interrupt 0 timer routing
+ over the 8254 in addition to over the IO-APIC. The
+ kernel tries to set a sensible default.
+
hpet= [IA-32,HPET] option to disable HPET and use PIT.
Format: disable
nomce [IA-32] Machine Check Exception
+ nomca [IA-64] Disable machine check abort handling
+
noresidual [PPC] Don't use residual data on PReP machines.
noresume [SWSUSP] Disables resume and restores original swap
New name for the ramdisk parameter.
See Documentation/ramdisk.txt.
+ rcu.blimit= [KNL,BOOT] Set maximum number of finished
+ RCU callbacks to process in one batch.
+
+ rcu.qhimark= [KNL,BOOT] Set threshold of queued
+ RCU callbacks over which batch limiting is disabled.
+
+ rcu.qlowmark= [KNL,BOOT] Set threshold of queued
+ RCU callbacks below which batch limiting is re-enabled.
+
+ rcu.rsinterval= [KNL,BOOT,SMP] Set the number of additional
+ RCU callbacks to queued before forcing reschedule
+ on all cpus.
+
rdinit= [KNL]
Format: <full_path>
Run specified binary instead of /init from the ramdisk,
12 -> Medion 7134 [16be:0003]
13 -> Typhoon TV+Radio 90031
14 -> ELSA EX-VISION 300TV [1048:226b]
- 15 -> ELSA EX-VISION 500TV [1048:226b]
+ 15 -> ELSA EX-VISION 500TV [1048:226a]
16 -> ASUS TV-FM 7134 [1043:4842,1043:4830,1043:4840]
17 -> AOPEN VA1000 POWER [1131:7133]
18 -> BMK MPEX No Tuner
74 -> LifeView FlyTV Platinum Mini2 [14c0:1212]
75 -> AVerMedia AVerTVHD MCE A180 [1461:1044]
76 -> SKNet MonsterTV Mobile [1131:4ee9]
- 77 -> Pinnacle PCTV 110i (saa7133) [11bd:002e]
+ 77 -> Pinnacle PCTV 40i/50i/110i (saa7133) [11bd:002e]
78 -> ASUSTeK P7131 Dual [1043:4862]
79 -> Sedna/MuchTV PC TV Cardbus TV/Radio (ITO25 Rev:2B)
80 -> ASUS Digimatrix TV [1043:0210]
DVB SUBSYSTEM AND DRIVERS
P: LinuxTV.org Project
-M: mchehab@infradead.org
M: v4l-dvb-maintainer@linuxtv.org
L: linux-dvb@linuxtv.org (subscription required)
W: http://linuxtv.org/
LINUX SECURITY MODULE (LSM) FRAMEWORK
P: Chris Wright
-M: chrisw@osdl.org
-L: linux-security-module@wirex.com
+M: chrisw@sous-sol.org
+L: linux-security-module@vger.kernel.org
W: http://lsm.immunix.org
T: git kernel.org:/pub/scm/linux/kernel/git/chrisw/lsm-2.6.git
S: Supported
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 16
-EXTRAVERSION =-rc5
+EXTRAVERSION =-rc6
NAME=Sliding Snow Leopard
# *DOCUMENTATION*
)
endef
-include/linux/version.h: $(srctree)/Makefile .config FORCE
+include/linux/version.h: $(srctree)/Makefile .config .kernelrelease FORCE
$(call filechk,version.h)
# ---------------------------------------------------------------------------
}
irq_enter();
+ /*
+ * __do_IRQ() must be called with IPL_MAX. Note that we do not
+ * explicitly enable interrupts afterwards - some MILO PALcode
+ * (namely LX164 one) seems to have severe problems with RTI
+ * at IPL 0.
+ */
local_irq_disable();
__do_IRQ(irq, regs);
- local_irq_enable();
irq_exit();
}
choice
prompt "ARM system type"
- default ARCH_RPC
+ default ARCH_VERSATILE
config ARCH_CLPS7500
bool "Cirrus-CL-PS7500FE"
source "drivers/spi/Kconfig"
+source "drivers/w1/Kconfig"
+
source "drivers/hwmon/Kconfig"
#source "drivers/l3/Kconfig"
DEFINE(TI_TP_VALUE, offsetof(struct thread_info, tp_value));
DEFINE(TI_FPSTATE, offsetof(struct thread_info, fpstate));
DEFINE(TI_VFPSTATE, offsetof(struct thread_info, vfpstate));
- DEFINE(TI_IWMMXT_STATE, (offsetof(struct thread_info, fpstate)+4)&~7);
+#ifdef CONFIG_IWMMXT
+ DEFINE(TI_IWMMXT_STATE, offsetof(struct thread_info, fpstate.iwmmxt));
+#endif
BLANK();
DEFINE(S_R0, offsetof(struct pt_regs, ARM_r0));
DEFINE(S_R1, offsetof(struct pt_regs, ARM_r1));
static int ptrace_getwmmxregs(struct task_struct *tsk, void __user *ufp)
{
struct thread_info *thread = task_thread_info(tsk);
- void *ptr = &thread->fpstate;
if (!test_ti_thread_flag(thread, TIF_USING_IWMMXT))
return -ENODATA;
iwmmxt_task_disable(thread); /* force it to ram */
- /* The iWMMXt state is stored doubleword-aligned. */
- if (((long) ptr) & 4)
- ptr += 4;
- return copy_to_user(ufp, ptr, 0x98) ? -EFAULT : 0;
+ return copy_to_user(ufp, &thread->fpstate.iwmmxt, IWMMXT_SIZE)
+ ? -EFAULT : 0;
}
/*
static int ptrace_setwmmxregs(struct task_struct *tsk, void __user *ufp)
{
struct thread_info *thread = task_thread_info(tsk);
- void *ptr = &thread->fpstate;
if (!test_ti_thread_flag(thread, TIF_USING_IWMMXT))
return -EACCES;
iwmmxt_task_release(thread); /* force a reload */
- /* The iWMMXt state is stored doubleword-aligned. */
- if (((long) ptr) & 4)
- ptr += 4;
- return copy_from_user(ptr, ufp, 0x98) ? -EFAULT : 0;
+ return copy_from_user(&thead->fpstate.iwmmxt, ufp, IWMMXT_SIZE)
+ ? -EFAULT : 0;
}
#endif
void timer_dyn_reprogram(void)
{
struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick;
+ unsigned long next, seq;
- if (dyn_tick) {
- write_seqlock(&xtime_lock);
- if (dyn_tick->state & DYN_TICK_ENABLED)
+ if (dyn_tick && (dyn_tick->state & DYN_TICK_ENABLED)) {
+ next = next_timer_interrupt();
+ do {
+ seq = read_seqbegin(&xtime_lock);
dyn_tick->reprogram(next_timer_interrupt() - jiffies);
- write_sequnlock(&xtime_lock);
+ } while (read_seqretry(&xtime_lock, seq));
}
}
mul xh, yl, xh
mla xh, xl, yh, xh
- mov ip, xl, asr #16
- mov yh, yl, asr #16
+ mov ip, xl, lsr #16
+ mov yh, yl, lsr #16
bic xl, xl, ip, lsl #16
bic yl, yl, yh, lsl #16
mla xh, yh, ip, xh
comment "IXP4xx Platforms"
-# This entry is placed on top because otherwise it would have
-# been shown as a submenu.
config MACH_NSLU2
bool
- prompt "NSLU2" if !(MACH_IXDP465 || MACH_IXDPG425 || ARCH_IXDP425 || ARCH_ADI_COYOTE || ARCH_AVILA || ARCH_IXCDP1100 || ARCH_PRPMC1100 || MACH_GTWX5715)
+ prompt "Linksys NSLU2"
help
Say 'Y' here if you want your kernel to support Linksys's
NSLU2 NAS device. For more information on this platform,
static void __exit nas100d_power_exit(void)
{
+ if (!(machine_is_nas100d()))
+ return;
+
free_irq(NAS100D_RB_IRQ, NULL);
}
{
ixp4xx_sys_init();
+ /* gpio 14 and 15 are _not_ clocks */
+ *IXP4XX_GPIO_GPCLKR = 0;
+
nas100d_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
nas100d_flash_resource.end =
IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
#ifdef HARVARD_CACHE
bic r0, r0, #CACHE_LINE_SIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D line
- mcr p15, 0, r0, c7, c5, 1 @ invalidate I line
add r0, r0, #CACHE_LINE_SIZE
cmp r0, r1
blo 1b
#endif
- mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB
-#ifdef HARVARD_CACHE
mov r0, #0
+#ifdef HARVARD_CACHE
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+ mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate
+#else
+ mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB
#endif
mov pc, lr
static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr)
{
unsigned long to = ALIAS_FLUSH_START + (CACHE_COLOUR(vaddr) << PAGE_SHIFT);
+ const int zero = 0;
set_pte(TOP_PTE(to), pfn_pte(pfn, PAGE_KERNEL));
flush_tlb_kernel_page(to);
asm( "mcrr p15, 0, %1, %0, c14\n"
- " mcrr p15, 0, %1, %0, c5\n"
+ " mcr p15, 0, %2, c7, c10, 4\n"
+ " mcr p15, 0, %2, c7, c5, 0\n"
:
- : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES)
+ : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero)
: "cc");
}
add r0, r0, #PAGE_SZ
cmp r0, r1
blo 1b
+ mcr p15, 0, r2, c7, c10, 4 @ data synchronization barrier
mov pc, lr
.section ".text.init", #alloc, #execinstr
#include <asm/setup.h>
#include <asm/pgtable.h>
+void (*pm_power_off)(void) = NULL;
+EXPORT_SYMBOL(pm_power_off);
+
asmlinkage void ret_from_fork(void);
/*
obj-y += cpu/
obj-y += timers/
-obj-$(CONFIG_ACPI) += acpi/
+obj-y += acpi/
obj-$(CONFIG_X86_BIOS_REBOOT) += reboot.o
obj-$(CONFIG_MCA) += mca.o
obj-$(CONFIG_X86_MSR) += msr.o
-obj-y := boot.o
+obj-$(CONFIG_ACPI) += boot.o
obj-$(CONFIG_X86_IO_APIC) += earlyquirk.o
obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup.o
extern int gsi_irq_sharing(int gsi);
#include <asm/proto.h>
+static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) { return 0; }
+
+
#else /* X86 */
#ifdef CONFIG_X86_LOCAL_APIC
disable_acpi();
return error;
}
-#ifdef __i386__
- check_acpi_pci();
-#endif
acpi_table_parse(ACPI_BOOT, acpi_parse_sbf);
#include <linux/pci.h>
#include <asm/pci-direct.h>
#include <asm/acpi.h>
+#include <asm/apic.h>
static int __init check_bridge(int vendor, int device)
{
+#ifdef CONFIG_ACPI
/* According to Nvidia all timer overrides are bogus. Just ignore
them all. */
if (vendor == PCI_VENDOR_ID_NVIDIA) {
acpi_skip_timer_override = 1;
}
+#endif
+ if (vendor == PCI_VENDOR_ID_ATI && timer_over_8254 == 1) {
+ timer_over_8254 = 0;
+ printk(KERN_INFO "ATI board detected. Disabling timer routing "
+ "over 8254.\n");
+ }
return 0;
}
*/
void lapic_shutdown(void)
{
+ unsigned long flags;
+
if (!cpu_has_apic)
return;
- local_irq_disable();
+ local_irq_save(flags);
clear_local_APIC();
if (enabled_via_apicbase)
disable_local_APIC();
- local_irq_enable();
+ local_irq_restore(flags);
}
#ifdef CONFIG_PM
c->x86_capability[4] = excap;
c->x86 = (tfms >> 8) & 15;
c->x86_model = (tfms >> 4) & 15;
- if (c->x86 == 0xf) {
+ if (c->x86 == 0xf)
c->x86 += (tfms >> 20) & 0xff;
+ if (c->x86 >= 0x6)
c->x86_model += ((tfms >> 16) & 0xF) << 4;
- }
c->x86_mask = tfms & 15;
} else {
/* Have CPUID level 0 only - unheard of */
{
unsigned long cr4;
unsigned long temp;
+ struct Xgt_desc_struct *cpu_gdt_descr;
spin_lock(&efi_rt_lock);
local_irq_save(efi_rt_eflags);
+ cpu_gdt_descr = &per_cpu(cpu_gdt_descr, 0);
+
/*
* If I don't have PSE, I should just duplicate two entries in page
* directory. If I have PSE, I just need to duplicate one entry in
*/
local_flush_tlb();
- per_cpu(cpu_gdt_descr, 0).address =
- __pa(per_cpu(cpu_gdt_descr, 0).address);
- load_gdt((struct Xgt_desc_struct *)__pa(&per_cpu(cpu_gdt_descr, 0)));
+ cpu_gdt_descr->address = __pa(cpu_gdt_descr->address);
+ load_gdt(cpu_gdt_descr);
}
static void efi_call_phys_epilog(void)
{
unsigned long cr4;
+ struct Xgt_desc_struct *cpu_gdt_descr = &per_cpu(cpu_gdt_descr, 0);
- per_cpu(cpu_gdt_descr, 0).address =
- (unsigned long)__va(per_cpu(cpu_gdt_descr, 0).address);
- load_gdt((struct Xgt_desc_struct *)__va(&per_cpu(cpu_gdt_descr, 0)));
+ cpu_gdt_descr->address = __va(cpu_gdt_descr->address);
+ load_gdt(cpu_gdt_descr);
cr4 = read_cr4();
static DEFINE_SPINLOCK(ioapic_lock);
+int timer_over_8254 __initdata = 1;
+
/*
* Is the SiS APIC rmw bug present ?
* -1 = don't know, 0 = no, 1 = yes
apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
init_8259A(1);
timer_ack = 1;
- enable_8259A_irq(0);
+ if (timer_over_8254 > 0)
+ enable_8259A_irq(0);
pin1 = find_isa_irq_pin(0, mp_INT);
apic1 = find_isa_irq_apic(0, mp_INT);
print_IO_APIC();
}
+static int __init setup_disable_8254_timer(char *s)
+{
+ timer_over_8254 = -1;
+ return 1;
+}
+static int __init setup_enable_8254_timer(char *s)
+{
+ timer_over_8254 = 2;
+ return 1;
+}
+
+__setup("disable_8254_timer", setup_disable_8254_timer);
+__setup("enable_8254_timer", setup_enable_8254_timer);
+
/*
* Called after all the initialization is done. If we didnt find any
* APIC bugs then we can allow the modify fast path
__asm__ __volatile__ (
"\tljmp $"STR(__KERNEL_CS)",$1f\n"
"\t1:\n"
- "\tmovl $"STR(__KERNEL_DS)",%eax\n"
- "\tmovl %eax,%ds\n"
- "\tmovl %eax,%es\n"
- "\tmovl %eax,%fs\n"
- "\tmovl %eax,%gs\n"
- "\tmovl %eax,%ss\n"
- );
+ "\tmovl $"STR(__KERNEL_DS)",%%eax\n"
+ "\tmovl %%eax,%%ds\n"
+ "\tmovl %%eax,%%es\n"
+ "\tmovl %%eax,%%fs\n"
+ "\tmovl %%eax,%%gs\n"
+ "\tmovl %%eax,%%ss\n"
+ ::: "eax", "memory");
#undef STR
#undef __STR
}
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sched.h>
+#include <linux/cpumask.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
error = -EINVAL;
goto out;
}
-
- for (cpu_num = 0; cpu_num < num_online_cpus(); cpu_num++) {
+
+ for_each_online_cpu(cpu_num) {
struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
if (uci->err != MC_NOTFOUND) /* already found a match or not an online cpu*/
continue;
error = -EFAULT;
goto out;
}
- for (cpu_num = 0; cpu_num < num_online_cpus(); cpu_num++) {
+ for_each_online_cpu(cpu_num) {
struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
if (uci->err != MC_NOTFOUND) /* already found a match or not an online cpu*/
continue;
}
}
/* now check if any cpu has matched */
- for (cpu_num = 0, allocated_flag = 0, sum = 0; cpu_num < num_online_cpus(); cpu_num++) {
+ allocated_flag = 0;
+ sum = 0;
+ for_each_online_cpu(cpu_num) {
if (ucode_cpu_info[cpu_num].err == MC_MARKED) {
struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
if (!allocated_flag) {
}
out_free:
- for (i = 0; i < num_online_cpus(); i++) {
+ for_each_online_cpu(i) {
if (ucode_cpu_info[i].mc) {
int j;
void *tmp = ucode_cpu_info[i].mc;
vfree(tmp);
- for (j = i; j < num_online_cpus(); j++) {
+ for_each_online_cpu(j) {
if (ucode_cpu_info[j].mc == tmp)
ucode_cpu_info[j].mc = NULL;
}
wrmsr(base+i, 0, 0);
}
-static inline void write_watchdog_counter(const char *descr)
+static void write_watchdog_counter(const char *descr)
{
u64 count = (u64)cpu_khz * 1000;
* die_nmi will return ONLY if NOTIFY_STOP happens..
*/
die_nmi(regs, "NMI Watchdog detected LOCKUP");
-
+ } else {
last_irq_sums[cpu] = sum;
alert_counter[cpu] = 0;
}
if (efi_enabled)
efi_map_memmap();
+#ifdef CONFIG_X86_IO_APIC
+ check_acpi_pci(); /* Checks more than just ACPI actually */
+#endif
+
#ifdef CONFIG_ACPI
/*
* Parse the ACPI tables for possible boot-time SMP configuration.
write_seqlock_irqsave(&xtime_lock, flags);
xtime.tv_sec = sec;
xtime.tv_nsec = 0;
- write_sequnlock_irqrestore(&xtime_lock, flags);
- jiffies += sleep_length;
+ jiffies_64 += sleep_length;
wall_jiffies += sleep_length;
+ write_sequnlock_irqrestore(&xtime_lock, flags);
if (last_timer->resume)
last_timer->resume();
cur_timer = last_timer;
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc1
-# Wed Sep 14 15:18:49 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 16:10:42 2006
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
#
# Processor type and features
#
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_MMU=y
+CONFIG_SWIOTLB=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
# CONFIG_IA64_GENERIC is not set
CONFIG_IA64_DIG=y
# CONFIG_IA64_HP_ZX1 is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_IA64_BRL_EMU=y
CONFIG_IA64_L1_CACHE_SHIFT=6
-# CONFIG_NUMA is not set
-# CONFIG_VIRTUAL_MEM_MAP is not set
# CONFIG_IA64_CYCLONE is not set
CONFIG_IOSAPIC=y
-# CONFIG_IA64_SGI_SN_XP is not set
-CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_FORCE_MAX_ZONEORDER=17
CONFIG_SMP=y
CONFIG_NR_CPUS=2
# CONFIG_HOTPLUG_CPU is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+# CONFIG_VIRTUAL_MEM_MAP is not set
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
# CONFIG_IA64_MCA_RECOVERY is not set
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
-# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
# Power management and ACPI
#
CONFIG_PM=y
+CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
#
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_CONTAINER is not set
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=m
+CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=m
#
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_ACPI=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
# Generic devices
#
CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
#
# PCI devices
#
+# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
CONFIG_SND_CS4281=m
+# CONFIG_SND_CS46XX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
#
# USB devices
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-CONFIG_USB_BLUETOOTH_TTY=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_INFINIBAND is not set
#
-# SN Devices
+# EDAC - error detection and reporting (RAS)
#
#
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
CONFIG_GENERIC_PENDING_IRQ=y
#
-# Profiling support
+# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
+# CONFIG_KPROBES is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_KPROBES is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_IA64_GRANULE_16MB is not set
CONFIG_IA64_GRANULE_64MB=y
# CONFIG_IA64_PRINT_HAZARDS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Wed Sep 28 08:27:29 2005
+# Linux kernel version: 2.6.16-rc5
+# Thu Mar 2 16:39:10 2006
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
#
# Processor type and features
#
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_MMU=y
+CONFIG_SWIOTLB=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
CONFIG_IA64_GENERIC=y
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_HP_ZX1 is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
+CONFIG_SGI_SN=y
#
# Firmware Drivers
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
-# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
# Power management and ACPI
#
CONFIG_PM=y
+CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
#
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_CONTAINER=m
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# Plug and Play support
#
-# CONFIG_PNP is not set
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
#
# Block devices
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIL24 is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_SATA_VIA is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=m
+# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_ACPI=y
CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
-CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_MMTIMER=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set
-CONFIG_SND_GENERIC_DRIVER=y
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
#
# PCI devices
#
+# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
-CONFIG_SND_CS4281=m
CONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
CONFIG_SND_FM801=m
# CONFIG_SND_FM801_TEA575X is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
#
# USB devices
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+# CONFIG_INFINIBAND_SRP is not set
#
# SN Devices
CONFIG_SGI_IOC4=y
CONFIG_SGI_IOC3=y
+#
+# EDAC - error detection and reporting (RAS)
+#
+
#
# File systems
#
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
# CONFIG_HP_SIMSCSI is not set
#
-# Profiling support
+# Instrumentation Support
#
# CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_KPROBES is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
# CONFIG_IA64_PRINT_HAZARDS is not set
#
# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 16:13:41 2006
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-# CONFIG_STANDALONE is not set
-CONFIG_BROKEN=y
-CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_HOTPLUG is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
#
# Processor type and features
#
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_MMU=y
+CONFIG_SWIOTLB=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_EFI=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
# CONFIG_IA64_GENERIC is not set
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_HP_ZX1 is not set
+# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
# CONFIG_IA64_SGI_SN2 is not set
CONFIG_IA64_HP_SIM=y
# CONFIG_ITANIUM is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
# CONFIG_IA64_PAGE_SIZE_16KB is not set
CONFIG_IA64_PAGE_SIZE_64KB=y
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
CONFIG_IA64_L1_CACHE_SHIFT=7
-# CONFIG_MCKINLEY_ASTEP_SPECIFIC is not set
-# CONFIG_VIRTUAL_MEM_MAP is not set
# CONFIG_IA64_CYCLONE is not set
-CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_FORCE_MAX_ZONEORDER=17
CONFIG_SMP=y
CONFIG_NR_CPUS=64
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_SCHED_SMT is not set
CONFIG_PREEMPT=y
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+# CONFIG_VIRTUAL_MEM_MAP is not set
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
+# CONFIG_IA64_MCA_RECOVERY is not set
# CONFIG_PERFMON is not set
CONFIG_IA64_PALINFO=m
# Firmware Drivers
#
CONFIG_EFI_VARS=y
-# CONFIG_SMBIOS is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
# Power management and ACPI
#
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+# CONFIG_UNIX is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
#
# Device Drivers
#
#
# Generic Driver Options
#
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
#
# Memory Technology Devices (MTD)
#
#
# Block devices
#
+# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
-# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_DEBUG is not set
#
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_IEEE1394 is not set
#
# I2O device support
#
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
+# CONFIG_NETDEVICES is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
#
-# Networking options
+# PHY device support
#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_UNIX is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
#
-# SCTP Configuration (EXPERIMENTAL)
+# Ethernet (10 or 100Mbit)
#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
+# CONFIG_NET_ETHERNET is not set
#
-# QoS and/or fair queueing
+# Ethernet (1000 Mbit)
#
-# CONFIG_NET_SCHED is not set
#
-# Network testing
+# Ethernet (10000 Mbit)
#
-# CONFIG_NET_PKTGEN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_NETDEVICES is not set
#
# ISDN subsystem
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-
#
# Input Device Drivers
#
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
#
# Character devices
#
#
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_QIC02_TAPE is not set
#
# IPMI
CONFIG_EFI_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
-# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
#
# Misc devices
#
+#
+# Multimedia Capabilities Port drivers
+#
+
#
# Multimedia devices
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
#
# USB support
#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS)
+#
+
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# DOS/FAT/NT Filesystems
#
-# CONFIG_FAT_FS is not set
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
#
# Library routines
#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
#
# HP Simulator drivers
CONFIG_HP_SIMSCSI=y
#
-# Profiling support
+# Instrumentation Support
#
# CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
#
# Kernel hacking
#
-# CONFIG_IA64_GRANULE_16MB is not set
-CONFIG_IA64_GRANULE_64MB=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_IA64_PRINT_HAZARDS is not set
-# CONFIG_DISABLE_VHPT is not set
+# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_IA64_GRANULE_16MB is not set
+CONFIG_IA64_GRANULE_64MB=y
+# CONFIG_IA64_PRINT_HAZARDS is not set
+# CONFIG_DISABLE_VHPT is not set
# CONFIG_IA64_DEBUG_CMPXCHG is not set
# CONFIG_IA64_DEBUG_IRQ is not set
-CONFIG_DEBUG_INFO=y
CONFIG_SYSVIPC_COMPAT=y
#
# Security options
#
+# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc4
-# Fri Dec 2 10:33:48 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 16:06:38 2006
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_CPUSETS=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_IA64_UNCACHED_ALLOCATOR=y
-CONFIG_ZONE_DMA_IS_DMA32=y
+CONFIG_DMA_IS_DMA32=y
# CONFIG_IA64_GENERIC is not set
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_HP_ZX1 is not set
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
+CONFIG_SGI_SN=y
#
# Firmware Drivers
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_CONTAINER is not set
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-CONFIG_SCSI_QLA22XX=y
-CONFIG_SCSI_QLA2300=y
-CONFIG_SCSI_QLA2322=y
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
CONFIG_AGP_SGI_TIOCA=y
# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=m
-# CONFIG_HPET is not set
CONFIG_MAX_RAW_DEVS=256
+# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_MMTIMER=y
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
CONFIG_SGI_IOC4=y
CONFIG_SGI_IOC3=y
+#
+# EDAC - error detection and reporting (RAS)
+#
+
#
# File systems
#
# CONFIG_XFS_SECURITY is not set
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc4
-# Fri Dec 2 16:06:32 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 15:49:18 2006
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ZONE_DMA_IS_DMA32=y
+CONFIG_DMA_IS_DMA32=y
# CONFIG_IA64_GENERIC is not set
CONFIG_IA64_DIG=y
# CONFIG_IA64_HP_ZX1 is not set
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_CONTAINER=m
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
CONFIG_SCSI_QLOGIC_FC=y
# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_ACPI=y
CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
-CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
#
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_INFINIBAND is not set
#
-# SN Devices
+# EDAC - error detection and reporting (RAS)
#
#
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc1
-# Wed Sep 14 15:15:01 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 15:55:36 2006
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
-CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
#
# Processor type and features
#
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_MMU=y
+CONFIG_SWIOTLB=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
# CONFIG_IA64_GENERIC is not set
# CONFIG_IA64_DIG is not set
CONFIG_IA64_HP_ZX1=y
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_IA64_L1_CACHE_SHIFT=7
-# CONFIG_NUMA is not set
-CONFIG_VIRTUAL_MEM_MAP=y
-CONFIG_HOLES_IN_ZONE=y
# CONFIG_IA64_CYCLONE is not set
CONFIG_IOSAPIC=y
-# CONFIG_IA64_SGI_SN_XP is not set
-CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_FORCE_MAX_ZONEORDER=17
CONFIG_SMP=y
CONFIG_NR_CPUS=16
# CONFIG_HOTPLUG_CPU is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_VIRTUAL_MEM_MAP=y
+CONFIG_HOLES_IN_ZONE=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
CONFIG_IA64_MCA_RECOVERY=y
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
-# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
# Power management and ACPI
#
CONFIG_PM=y
+CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
#
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_CONTAINER is not set
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-CONFIG_IP_NF_ARPTABLES=y
-# CONFIG_IP_NF_ARPFILTER is not set
-# CONFIG_IP_NF_ARP_MANGLE is not set
#
# DCCP Configuration (EXPERIMENTAL)
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=y
+# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_ACPI=y
CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
#
# Video Adapters
#
+# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
-# CONFIG_VIDEO_ZR36120 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_VIDEO_AUDIO_DECODER is not set
+# CONFIG_VIDEO_DECODER is not set
#
# Radio Adapters
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_AC97_BUS=y
#
# PCI devices
#
+# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
CONFIG_SND_FM801=y
CONFIG_SND_FM801_TEA575X=y
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
#
# USB devices
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
+# CONFIG_USB_ET61X251 is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_INFINIBAND is not set
#
-# SN Devices
+# EDAC - error detection and reporting (RAS)
#
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_INOTIFY is not set
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
CONFIG_GENERIC_PENDING_IRQ=y
#
-# Profiling support
+# Instrumentation Support
#
# CONFIG_PROFILING is not set
+CONFIG_KPROBES=y
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
-CONFIG_KPROBES=y
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
CONFIG_IA64_PRINT_HAZARDS=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc1
-# Wed Sep 14 15:13:03 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 16:02:28 2006
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
#
# Processor type and features
#
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_MMU=y
+CONFIG_SWIOTLB=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
CONFIG_IA64_GENERIC=y
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_HP_ZX1 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_IA64_L1_CACHE_SHIFT=7
-CONFIG_NUMA=y
-CONFIG_VIRTUAL_MEM_MAP=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_IA64_CYCLONE=y
CONFIG_IOSAPIC=y
# CONFIG_IA64_SGI_SN_XP is not set
-CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_FORCE_MAX_ZONEORDER=17
CONFIG_SMP=y
CONFIG_NR_CPUS=512
CONFIG_HOTPLUG_CPU=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_NUMA=y
+CONFIG_VIRTUAL_MEM_MAP=y
+CONFIG_HOLES_IN_ZONE=y
+CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
+CONFIG_SGI_SN=y
#
# Firmware Drivers
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
-# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
# Power management and ACPI
#
CONFIG_PM=y
+CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
#
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_CONTAINER=m
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIL24 is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_SATA_VIA is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=m
+# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_ACPI=y
CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_SGI_L1_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_SGI_IOC4=y
+# CONFIG_SERIAL_SGI_IOC3 is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
-CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_MMTIMER=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set
-CONFIG_SND_GENERIC_DRIVER=y
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
#
# PCI devices
#
+# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
-CONFIG_SND_CS4281=m
CONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
CONFIG_SND_FM801=m
# CONFIG_SND_FM801_TEA575X is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
#
# USB devices
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+# CONFIG_INFINIBAND_SRP is not set
#
# SN Devices
#
CONFIG_SGI_IOC4=y
+CONFIG_SGI_IOC3=m
+
+#
+# EDAC - error detection and reporting (RAS)
+#
#
# File systems
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
# CONFIG_HP_SIMSCSI is not set
#
-# Profiling support
+# Instrumentation Support
#
# CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_KPROBES is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
# CONFIG_IA64_PRINT_HAZARDS is not set
u32* volatile cyclone_timer; /* Cyclone MPMC0 register */
if (!use_cyclone)
- return -ENODEV;
+ return 0;
printk(KERN_INFO "Summit chipset: Starting Cyclone Counter.\n");
data8 0 // timer_delete
data8 0 // clock_settime
data8 fsys_clock_gettime // clock_gettime
- #define __NR_syscall_last 1255
- .space 8*(NR_syscalls + 1024 - __NR_syscall_last), 0
-
- .org fsyscall_table + 8*NR_syscalls // guard against failures to increase NR_syscalls
+ // fill in zeros for the remaining entries
+ .zero:
+ .space fsyscall_table + 8*NR_syscalls - .zero, 0
;; // avoid RAW on r18
mov ar.ccv=r18 // set compare value for cmpxchg
or r25=_PAGE_D|_PAGE_A,r18 // set the dirty and accessed bits
+ tbit.z p7,p6 = r18,_PAGE_P_BIT // Check present bit
;;
- cmpxchg8.acq r26=[r17],r25,ar.ccv
+(p6) cmpxchg8.acq r26=[r17],r25,ar.ccv // Only update if page is present
mov r24=PAGE_SHIFT<<2
;;
- cmp.eq p6,p7=r26,r18
+(p6) cmp.eq p6,p7=r26,r18 // Only compare if page is present
;;
(p6) itc.d r25 // install updated PTE
;;
;;
mov ar.ccv=r18 // set compare value for cmpxchg
or r25=_PAGE_A,r18 // set the accessed bit
+ tbit.z p7,p6 = r18,_PAGE_P_BIT // Check present bit
;;
- cmpxchg8.acq r26=[r17],r25,ar.ccv
+(p6) cmpxchg8.acq r26=[r17],r25,ar.ccv // Only if page present
mov r24=PAGE_SHIFT<<2
;;
- cmp.eq p6,p7=r26,r18
+(p6) cmp.eq p6,p7=r26,r18 // Only if page present
;;
(p6) itc.i r25 // install updated PTE
;;
;; // avoid RAW on r18
mov ar.ccv=r18 // set compare value for cmpxchg
or r25=_PAGE_A,r18 // set the dirty bit
+ tbit.z p7,p6 = r18,_PAGE_P_BIT // Check present bit
;;
- cmpxchg8.acq r26=[r17],r25,ar.ccv
+(p6) cmpxchg8.acq r26=[r17],r25,ar.ccv // Only if page is present
mov r24=PAGE_SHIFT<<2
;;
- cmp.eq p6,p7=r26,r18
+(p6) cmp.eq p6,p7=r26,r18 // Only if page is present
;;
(p6) itc.d r25 // install updated PTE
/*
// 0x5a00 Entry 30 (size 16 bundles) Unaligned Reference (57)
ENTRY(unaligned_access)
DBG_FAULT(30)
- mov r16=cr.ipsr
mov r31=pr // prepare to save predicates
;;
br.sptk.many dispatch_unaligned_handler
void
mca_handler_bh(unsigned long paddr)
{
- printk(KERN_DEBUG "OS_MCA: process [pid: %d](%s) encounters MCA.\n",
- current->pid, current->comm);
+ printk(KERN_ERR
+ "OS_MCA: process [pid: %d](%s) encounters MCA (paddr=%lx)\n",
+ current->pid, current->comm, paddr);
spin_lock(&mca_bh_lock);
switch (mca_page_isolate(paddr)) {
printk(KERN_DEBUG "Page isolation: ( %lx ) success.\n", paddr);
break;
case ISOLATE_NG:
- printk(KERN_DEBUG "Page isolation: ( %lx ) failure.\n", paddr);
+ printk(KERN_CRIT "Page isolation: ( %lx ) failure.\n", paddr);
break;
default:
break;
return 0;
/*
- * If there is no bus error, record is weird but we need not to recover.
+ * The cache check and bus check bits have four possible states
+ * cc bc
+ * 0 0 Weird record, not recovered
+ * 1 0 Cache error, not recovered
+ * 0 1 I/O error, attempt recovery
+ * 1 1 Memory error, attempt recovery
*/
if (psp->bc == 0 || pbci == NULL)
- return 1;
+ return 0;
/*
* Sorry, we cannot handle so many.
#include <asm/uaccess.h>
#include <asm/unaligned.h>
-extern void die_if_kernel(char *str, struct pt_regs *regs, long err) __attribute__ ((noreturn));
+extern void die_if_kernel(char *str, struct pt_regs *regs, long err);
#undef DEBUG_UNALIGNED_TRAP
#define IA64_FIRST_ROTATING_FR 32
#define SIGN_EXT9 0xffffffffffffff00ul
+/*
+ * sysctl settable hook which tells the kernel whether to honor the
+ * IA64_THREAD_UAC_NOPRINT prctl. Because this is user settable, we want
+ * to allow the super user to enable/disable this for security reasons
+ * (i.e. don't allow attacker to fill up logs with unaligned accesses).
+ */
+int no_unaligned_warning;
+static int noprint_warning;
+
/*
* For M-unit:
*
if ((current->thread.flags & IA64_THREAD_UAC_SIGBUS) != 0)
goto force_sigbus;
- if (!(current->thread.flags & IA64_THREAD_UAC_NOPRINT)
- && within_logging_rate_limit())
+ if (!no_unaligned_warning &&
+ !(current->thread.flags & IA64_THREAD_UAC_NOPRINT) &&
+ within_logging_rate_limit())
{
char buf[200]; /* comm[] is at most 16 bytes... */
size_t len;
if (user_mode(regs))
tty_write_message(current->signal->tty, buf);
buf[len-1] = '\0'; /* drop '\r' */
- printk(KERN_WARNING "%s", buf); /* watch for command names containing %s */
+ /* watch for command names containing %s */
+ printk(KERN_WARNING "%s", buf);
+ } else {
+ if (no_unaligned_warning && !noprint_warning) {
+ noprint_warning = 1;
+ printk(KERN_WARNING "%s(%d) encountered an "
+ "unaligned exception which required\n"
+ "kernel assistance, which degrades "
+ "the performance of the application.\n"
+ "Unaligned exception warnings have "
+ "been disabled by the system "
+ "administrator\n"
+ "echo 0 > /proc/sys/kernel/ignore-"
+ "unaligned-usertrap to re-enable\n",
+ current->comm, current->pid);
+ }
}
} else {
if (within_logging_rate_limit())
char * __init
pcibios_setup (char *str)
{
- return NULL;
+ return str;
}
int
EXPORT_SYMBOL(sn_pci_controller_fixup);
EXPORT_SYMBOL(sn_bus_store_sysdata);
EXPORT_SYMBOL(sn_bus_free_sysdata);
-EXPORT_SYMBOL(sn_pcidev_info_get);
static int __init sn2_ptc_init(void)
{
if (!ia64_platform_is("sn2"))
- return -ENOSYS;
+ return 0;
if (!(proc_sn2_ptc = create_proc_entry(PTC_BASENAME, 0444, NULL))) {
printk(KERN_ERR "unable to create %s proc entry", PTC_BASENAME);
int found_tiocx_device = 0;
if (!ia64_platform_is("sn2"))
- return -ENODEV;
+ return 0;
bus_register(&tiocx_bus_type);
depends on SYS_HAS_CPU_MIPS32_R1
select CPU_HAS_PREFETCH
select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_HIGHMEM
help
Choose this option to build a kernel for release 1 or later of the
MIPS32 architecture. Most modern embedded systems with a 32-bit
depends on SYS_HAS_CPU_MIPS32_R2
select CPU_HAS_PREFETCH
select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_HIGHMEM
help
Choose this option to build a kernel for release 2 or later of the
MIPS32 architecture. Most modern embedded systems with a 32-bit
select CPU_HAS_PREFETCH
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
+ select CPU_SUPPORTS_HIGHMEM
help
Choose this option to build a kernel for release 1 or later of the
MIPS64 architecture. Many modern embedded systems with a 64-bit
select CPU_HAS_PREFETCH
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
+ select CPU_SUPPORTS_HIGHMEM
help
Choose this option to build a kernel for release 2 or later of the
MIPS64 architecture. Many modern embedded systems with a 64-bit
# crossformat linking we rely on the elf2ecoff tool for format conversion.
#
cflags-y += -G 0 -mno-abicalls -fno-pic -pipe
+cflags-y += -msoft-float
LDFLAGS_vmlinux += -G 0 -static -n -nostdlib
MODFLAGS += -mlong-calls
}
}
-static int __init prom_console_setup(struct console *co, char *options)
+static int prom_console_setup(struct console *co, char *options)
{
return !(prom_flags & PROM_FLAG_USE_AS_CONSOLE);
}
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
-#include <asm/ptrace.h>
-#include <linux/sched.h>
#include <linux/kernel_stat.h>
+#include <linux/mv643xx.h>
+#include <linux/sched.h>
+
+#include <asm/ptrace.h>
#include <asm/io.h>
#include <asm/irq.h>
-#include <linux/mv643xx.h>
+#include <asm/marvell.h>
static unsigned int irq_base;
return error;
}
-struct dirent32 {
- unsigned int d_ino;
- unsigned int d_off;
- unsigned short d_reclen;
- char d_name[NAME_MAX + 1];
-};
-
-static void
-xlate_dirent(void *dirent64, void *dirent32, long n)
-{
- long off;
- struct dirent *dirp;
- struct dirent32 *dirp32;
-
- off = 0;
- while (off < n) {
- dirp = (struct dirent *)(dirent64 + off);
- dirp32 = (struct dirent32 *)(dirent32 + off);
- off += dirp->d_reclen;
- dirp32->d_ino = dirp->d_ino;
- dirp32->d_off = (unsigned int)dirp->d_off;
- dirp32->d_reclen = dirp->d_reclen;
- strncpy(dirp32->d_name, dirp->d_name, dirp->d_reclen - ((3 * 4) + 2));
- }
- return;
-}
-
-asmlinkage long
-sys32_getdents(unsigned int fd, void * dirent32, unsigned int count)
-{
- long n;
- void *dirent64;
-
- dirent64 = (void *)((unsigned long)(dirent32 + (sizeof(long) - 1)) & ~(sizeof(long) - 1));
- if ((n = sys_getdents(fd, dirent64, count - (dirent64 - dirent32))) < 0)
- return(n);
- xlate_dirent(dirent64, dirent32, n);
- return(n);
-}
-
-asmlinkage int old_readdir(unsigned int fd, void * dirent, unsigned int count);
-
-asmlinkage int
-sys32_readdir(unsigned int fd, void * dirent32, unsigned int count)
-{
- int n;
- struct dirent dirent64;
-
- if ((n = old_readdir(fd, &dirent64, count)) < 0)
- return(n);
- xlate_dirent(&dirent64, dirent32, dirent64.d_reclen);
- return(n);
-}
-
asmlinkage int
sys32_waitpid(compat_pid_t pid, unsigned int *stat_addr, int options)
{
PTR sys_fdatasync
PTR sys_truncate
PTR sys_ftruncate /* 6075 */
- PTR sys32_getdents
+ PTR compat_sys_getdents
PTR sys_getcwd
PTR sys_chdir
PTR sys_fchdir
PTR sys_uselib
PTR sys_swapon
PTR sys_reboot
- PTR sys32_readdir
+ PTR compat_sys_old_readdir
PTR old_mmap /* 4090 */
PTR sys_munmap
PTR sys_truncate
PTR sys_setfsuid
PTR sys_setfsgid
PTR sys32_llseek /* 4140 */
- PTR sys32_getdents
+ PTR compat_sys_getdents
PTR compat_sys_select
PTR sys_flock
PTR sys_msync
sparse_init();
paging_init();
resource_init();
+#ifdef CONFIG_SMP
+ plat_smp_setup();
+#endif
}
int __init fpu_disable(char *s)
init_new_context(current, &init_mm);
current_thread_info()->cpu = 0;
smp_tune_scheduling();
- prom_prepare_cpus(max_cpus);
+ plat_prepare_cpus(max_cpus);
}
/* preload SMP state for boot cpu */
* Make sure all CPU's are in a sensible state before we boot any of the
* secondarys
*/
-void prom_prepare_cpus(unsigned int max_cpus)
+void plat_smp_setup(void)
{
unsigned long val;
int i, num;
write_vpe_c0_vpeconf0(tmp);
/* Record this as available CPU */
- if (i < max_cpus) {
- cpu_set(i, phys_cpu_present_map);
- __cpu_number_map[i] = ++num;
- __cpu_logical_map[num] = i;
- }
+ cpu_set(i, phys_cpu_present_map);
+ __cpu_number_map[i] = ++num;
+ __cpu_logical_map[num] = i;
}
/* disable multi-threading with TC's */
set_vi_handler (MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch);
set_vi_handler (MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
}
+}
+void __init plat_prepare_cpus(unsigned int max_cpus)
+{
cpu_ipi_resched_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_RESCHED_IRQ;
cpu_ipi_call_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_CALL_IRQ;
unsigned long seq;
unsigned long lost;
unsigned long usec, sec;
- unsigned long max_ntp_tick = tick_usec - tickadj;
+ unsigned long max_ntp_tick;
do {
seq = read_seqbegin(&xtime_lock);
* Better to lose some accuracy than have time go backwards..
*/
if (unlikely(time_adjust < 0)) {
+ max_ntp_tick = (USEC_PER_SEC / HZ) - tickadj;
usec = min(usec, max_ntp_tick);
if (lost)
usec += lost * max_ntp_tick;
} else if (unlikely(lost))
- usec += lost * tick_usec;
+ usec += lost * (USEC_PER_SEC / HZ);
sec = xtime.tv_sec;
usec += (xtime.tv_nsec / 1000);
.con_initcall.init : { *(.con_initcall.init) }
__con_initcall_end = .;
SECURITY_INIT
+ /* .exit.text is discarded at runtime, not link time, to deal with
+ references from .rodata */
+ .exit.text : { *(.exit.text) }
. = ALIGN(_PAGE_SIZE);
__initramfs_start = .;
.init.ramfs : { *(.init.ramfs) }
/* Sections to be discarded */
/DISCARD/ : {
- *(.exit.text)
*(.exit.data)
*(.exitcall.exit)
return ioport_map(start, len);
if (flags & IORESOURCE_MEM) {
if (flags & IORESOURCE_CACHEABLE)
- return ioremap_cacheable_cow(start, len);
+ return ioremap_cachable(start, len);
return ioremap_nocache(start, len);
}
{
unsigned long sc_lsize = cpu_scache_line_size();
- if (sc_lsize == 16)
+ if (scache_size == 0)
+ r4k_blast_scache_page = (void *)no_sc_noop;
+ else if (sc_lsize == 16)
r4k_blast_scache_page = blast_scache16_page;
else if (sc_lsize == 32)
r4k_blast_scache_page = blast_scache32_page;
{
unsigned long sc_lsize = cpu_scache_line_size();
- if (sc_lsize == 16)
+ if (scache_size == 0)
+ r4k_blast_scache_page_indexed = (void *)no_sc_noop;
+ else if (sc_lsize == 16)
r4k_blast_scache_page_indexed = blast_scache16_page_indexed;
else if (sc_lsize == 32)
r4k_blast_scache_page_indexed = blast_scache32_page_indexed;
{
unsigned long sc_lsize = cpu_scache_line_size();
- if (sc_lsize == 16)
+ if (scache_size == 0)
+ r4k_blast_scache = (void *)no_sc_noop;
+ else if (sc_lsize == 16)
r4k_blast_scache = blast_scache16;
else if (sc_lsize == 32)
r4k_blast_scache = blast_scache32;
protected_blast_dcache_range(start, end);
}
- if (!cpu_icache_snoops_remote_store) {
+ if (!cpu_icache_snoops_remote_store && scache_size) {
if (end - start > scache_size)
r4k_blast_scache();
else
R4600_HIT_CACHEOP_WAR_IMPL;
protected_writeback_dcache_line(addr & ~(dc_lsize - 1));
- if (!cpu_icache_snoops_remote_store)
+ if (!cpu_icache_snoops_remote_store && scache_size)
protected_writeback_scache_line(addr & ~(sc_lsize - 1));
protected_flush_icache_line(addr & ~(ic_lsize - 1));
if (MIPS4K_ICACHE_REFILL_WAR) {
}
#define I_u1u2u3(op) \
- static inline void i##op(u32 **buf, unsigned int a, \
+ static inline void __init i##op(u32 **buf, unsigned int a, \
unsigned int b, unsigned int c) \
{ \
build_insn(buf, insn##op, a, b, c); \
}
#define I_u2u1u3(op) \
- static inline void i##op(u32 **buf, unsigned int a, \
+ static inline void __init i##op(u32 **buf, unsigned int a, \
unsigned int b, unsigned int c) \
{ \
build_insn(buf, insn##op, b, a, c); \
}
#define I_u3u1u2(op) \
- static inline void i##op(u32 **buf, unsigned int a, \
+ static inline void __init i##op(u32 **buf, unsigned int a, \
unsigned int b, unsigned int c) \
{ \
build_insn(buf, insn##op, b, c, a); \
}
#define I_u1u2s3(op) \
- static inline void i##op(u32 **buf, unsigned int a, \
+ static inline void __init i##op(u32 **buf, unsigned int a, \
unsigned int b, signed int c) \
{ \
build_insn(buf, insn##op, a, b, c); \
}
#define I_u2s3u1(op) \
- static inline void i##op(u32 **buf, unsigned int a, \
+ static inline void __init i##op(u32 **buf, unsigned int a, \
signed int b, unsigned int c) \
{ \
build_insn(buf, insn##op, c, a, b); \
}
#define I_u2u1s3(op) \
- static inline void i##op(u32 **buf, unsigned int a, \
+ static inline void __init i##op(u32 **buf, unsigned int a, \
unsigned int b, signed int c) \
{ \
build_insn(buf, insn##op, b, a, c); \
}
#define I_u1u2(op) \
- static inline void i##op(u32 **buf, unsigned int a, \
+ static inline void __init i##op(u32 **buf, unsigned int a, \
unsigned int b) \
{ \
build_insn(buf, insn##op, a, b); \
}
#define I_u1s2(op) \
- static inline void i##op(u32 **buf, unsigned int a, \
+ static inline void __init i##op(u32 **buf, unsigned int a, \
signed int b) \
{ \
build_insn(buf, insn##op, a, b); \
}
#define I_u1(op) \
- static inline void i##op(u32 **buf, unsigned int a) \
+ static inline void __init i##op(u32 **buf, unsigned int a) \
{ \
build_insn(buf, insn##op, a); \
}
#define I_0(op) \
- static inline void i##op(u32 **buf) \
+ static inline void __init i##op(u32 **buf) \
{ \
build_insn(buf, insn##op); \
}
}
/* convenience functions for labeled branches */
-static void __attribute__((unused)) il_bltz(u32 **p, struct reloc **r,
- unsigned int reg, enum label_id l)
+static void __init __attribute__((unused))
+ il_bltz(u32 **p, struct reloc **r, unsigned int reg, enum label_id l)
{
r_mips_pc16(r, *p, l);
i_bltz(p, reg, 0);
}
-static void __attribute__((unused)) il_b(u32 **p, struct reloc **r,
+static void __init __attribute__((unused)) il_b(u32 **p, struct reloc **r,
enum label_id l)
{
r_mips_pc16(r, *p, l);
i_b(p, 0);
}
-static void il_beqz(u32 **p, struct reloc **r, unsigned int reg,
+static void __init il_beqz(u32 **p, struct reloc **r, unsigned int reg,
enum label_id l)
{
r_mips_pc16(r, *p, l);
i_beqz(p, reg, 0);
}
-static void __attribute__((unused))
+static void __init __attribute__((unused))
il_beqzl(u32 **p, struct reloc **r, unsigned int reg, enum label_id l)
{
r_mips_pc16(r, *p, l);
i_beqzl(p, reg, 0);
}
-static void il_bnez(u32 **p, struct reloc **r, unsigned int reg,
+static void __init il_bnez(u32 **p, struct reloc **r, unsigned int reg,
enum label_id l)
{
r_mips_pc16(r, *p, l);
i_bnez(p, reg, 0);
}
-static void il_bgezl(u32 **p, struct reloc **r, unsigned int reg,
+static void __init il_bgezl(u32 **p, struct reloc **r, unsigned int reg,
enum label_id l)
{
r_mips_pc16(r, *p, l);
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/bootmem.h>
+#include <linux/mv643xx.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
-#include <asm/mv64340.h>
#include <asm/pmon.h>
#include "jaguar_atx_fpga.h"
* BRIEF MODULE DESCRIPTION
* Momentum Computer Jaguar-ATX board dependent boot routines
*
- * Copyright (C) 1996, 1997, 2001, 2004 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 1996, 1997, 2001, 04, 06 Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 2000 RidgeRun, Inc.
* Copyright (C) 2001 Red Hat, Inc.
* Copyright (C) 2002 Momentum Computer
#include <linux/interrupt.h>
#include <linux/timex.h>
#include <linux/vmalloc.h>
+#include <linux/mv643xx.h>
+
#include <asm/time.h>
#include <asm/bootinfo.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include <asm/reboot.h>
#include <asm/tlbflush.h>
-#include <asm/mv64340.h>
#include "jaguar_atx_fpga.h"
#include <linux/slab.h>
#include <linux/random.h>
#include <linux/bitops.h>
+#include <linux/mv643xx.h>
#include <asm/bootinfo.h>
#include <asm/io.h>
#include <asm/irq_cpu.h>
#include <asm/mipsregs.h>
-#include <asm/mv64340.h>
#include <asm/system.h>
extern asmlinkage void ocelot_handle_int(void);
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/bootmem.h>
+#include <linux/mv643xx.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
-#include <asm/mv64340.h>
#include <asm/pmon.h>
#include "ocelot_c_fpga.h"
#include <linux/pm.h>
#include <linux/timex.h>
#include <linux/vmalloc.h>
+#include <linux/mv643xx.h>
#include <asm/time.h>
#include <asm/bootinfo.h>
#include <asm/processor.h>
#include <asm/ptrace.h>
#include <asm/reboot.h>
+#include <asm/marvell.h>
#include <linux/bootmem.h>
#include <linux/blkdev.h>
-#include <asm/mv64340.h>
#include "ocelot_c_fpga.h"
unsigned long marvell_base;
/* shut down ethernet ports, just to be sure our memory doesn't get
* corrupted by random ethernet traffic.
*/
- MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8);
- MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8);
- MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8);
- MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8);
+ MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8);
+ MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8);
+ MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8);
+ MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8);
do {}
- while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff);
+ while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff);
do {}
- while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff);
+ while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff);
do {}
- while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff);
+ while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff);
do {}
- while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff);
- MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(0),
- MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1);
- MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(1),
- MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1);
+ while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff);
+ MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0),
+ MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1);
+ MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1),
+ MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1);
/* Turn off the Bit-Error LED */
OCELOT_FPGA_WRITE(0x80, CLR);
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2004, 06 by Ralf Baechle (ralf@linux-mips.org)
*/
#include <linux/types.h>
#include <linux/pci.h>
-#include <asm/mv64340.h>
+#include <linux/mv643xx.h>
#include <linux/init.h>
+#include <asm/marvell.h>
+
/*
* We assume the address ranges have already been setup appropriately by
* the firmware. PMON in case of the Ocelot C does that.
* We don't want to start the secondary CPU yet nor do we have a nice probing
* feature in PMON so we just assume presence of the secondary core.
*/
-static char maxcpus_string[] __initdata =
- KERN_WARNING "max_cpus set to 0; using 1 instead\n";
-
-void __init prom_prepare_cpus(unsigned int max_cpus)
+void __init plat_smp_setup(void)
{
- int enabled = 0, i;
-
- if (max_cpus == 0) {
- printk(maxcpus_string);
- max_cpus = 1;
- }
+ int i;
cpus_clear(phys_cpu_present_map);
for (i = 0; i < 2; i++) {
- if (i == max_cpus)
- break;
-
- /*
- * The boot CPU
- */
cpu_set(i, phys_cpu_present_map);
__cpu_number_map[i] = i;
__cpu_logical_map[i] = i;
- enabled++;
}
+}
+void __init plat_prepare_cpus(unsigned int max_cpus)
+{
/*
* Be paranoid. Enable the IPI only if we're really about to go SMP.
*/
- if (enabled > 1)
+ if (cpus_weight(cpu_possible_map))
set_c0_status(STATUSF_IP5);
}
REMOTE_HUB_CLR_INTR(nasid, i);
}
-void __init prom_prepare_cpus(unsigned int max_cpus)
+void __init plat_smp_setup(void)
{
cnodeid_t cnode;
alloc_cpupda(0, 0);
}
+void __init plat_prepare_cpus(unsigned int max_cpus)
+{
+ /* We already did everything necessary earlier */
+}
+
/*
* Launch a slave into smp_bootstrap(). It doesn't take an argument, and we
* set sp to the kernel stack of the newly created idle process, gp to the proc
*
* Common setup before any secondaries are started
*/
-void __init prom_prepare_cpus(unsigned int max_cpus)
+void __init plat_smp_setup(void)
{
int i, num;
__cpu_number_map[0] = 0;
__cpu_logical_map[0] = 0;
- for (i=1, num=0; i<NR_CPUS; i++) {
+ for (i = 1, num = 0; i < NR_CPUS; i++) {
if (cfe_cpu_stop(i) == 0) {
cpu_set(i, phys_cpu_present_map);
__cpu_number_map[i] = ++num;
__cpu_logical_map[num] = i;
}
}
- printk("Detected %i available secondary CPU(s)\n", num);
+ printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
+}
+
+void __init plat_prepare_cpus(unsigned int max_cpus)
+{
}
/*
DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count));
- DEFINE(TI_SIGFRAME, offsetof(struct thread_info, nvgprs_frame));
DEFINE(TI_TASK, offsetof(struct thread_info, task));
#ifdef CONFIG_PPC32
DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain));
PPC_FEATURE_HAS_MMU)
#define COMMON_USER_PPC64 (COMMON_USER | PPC_FEATURE_64)
#define COMMON_USER_POWER4 (COMMON_USER_PPC64 | PPC_FEATURE_POWER4)
-#define COMMON_USER_POWER5 (COMMON_USER_PPC64 | PPC_FEATURE_POWER5)
-#define COMMON_USER_POWER5_PLUS (COMMON_USER_PPC64 | PPC_FEATURE_POWER5_PLUS)
+#define COMMON_USER_POWER5 (COMMON_USER_PPC64 | PPC_FEATURE_POWER5 |\
+ PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP)
+#define COMMON_USER_POWER5_PLUS (COMMON_USER_PPC64 | PPC_FEATURE_POWER5_PLUS|\
+ PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP)
#define COMMON_USER_BOOKE (PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | \
PPC_FEATURE_BOOKE)
.cpu_name = "Cell Broadband Engine",
.cpu_features = CPU_FTRS_CELL,
.cpu_user_features = COMMON_USER_PPC64 |
- PPC_FEATURE_CELL | PPC_FEATURE_HAS_ALTIVEC_COMP,
+ PPC_FEATURE_CELL | PPC_FEATURE_HAS_ALTIVEC_COMP |
+ PPC_FEATURE_SMT,
.icache_bsize = 128,
.dcache_bsize = 128,
.cpu_setup = __setup_cpu_be,
MTMSRD(r10)
lwz r9,TI_FLAGS(r12)
li r8,-_LAST_ERRNO
- andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL|_TIF_RESTORE_SIGMASK)
+ andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
bne- syscall_exit_work
cmplw 0,r3,r8
blt+ syscall_exit_cont
syscall_exit_work:
andi. r0,r9,_TIF_RESTOREALL
- bne- 2f
- cmplw 0,r3,r8
+ beq+ 0f
+ REST_NVGPRS(r1)
+ b 2f
+0: cmplw 0,r3,r8
blt+ 1f
andi. r0,r9,_TIF_NOERROR
bne- 1f
2: andi. r0,r9,(_TIF_PERSYSCALL_MASK)
beq 4f
- /* Clear per-syscall TIF flags if any are set, but _leave_
- _TIF_SAVE_NVGPRS set in r9 since we haven't dealt with that
- yet. */
+ /* Clear per-syscall TIF flags if any are set. */
li r11,_TIF_PERSYSCALL_MASK
addi r12,r12,TI_FLAGS
subi r12,r12,TI_FLAGS
4: /* Anything which requires enabling interrupts? */
- andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_SAVE_NVGPRS)
- beq 7f
+ andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
+ beq ret_from_except
+
+ /* Re-enable interrupts */
+ ori r10,r10,MSR_EE
+ SYNC
+ MTMSRD(r10)
/* Save NVGPRS if they're not saved already */
lwz r4,_TRAP(r1)
SAVE_NVGPRS(r1)
li r4,0xc00
stw r4,_TRAP(r1)
-
- /* Re-enable interrupts */
-5: ori r10,r10,MSR_EE
- SYNC
- MTMSRD(r10)
-
- andi. r0,r9,_TIF_SAVE_NVGPRS
- bne save_user_nvgprs
-
-save_user_nvgprs_cont:
- andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
- beq 7f
-
+5:
addi r3,r1,STACK_FRAME_OVERHEAD
bl do_syscall_trace_leave
- REST_NVGPRS(r1)
-
-6: lwz r3,GPR3(r1)
- LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */
- SYNC
- MTMSRD(r10) /* disable interrupts again */
- rlwinm r12,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */
- lwz r9,TI_FLAGS(r12)
-7:
- andi. r0,r9,_TIF_NEED_RESCHED
- bne 8f
- lwz r5,_MSR(r1)
- andi. r5,r5,MSR_PR
- beq ret_from_except
- andi. r0,r9,_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK
- beq ret_from_except
- b do_user_signal
-8:
- ori r10,r10,MSR_EE
- SYNC
- MTMSRD(r10) /* re-enable interrupts */
- bl schedule
- b 6b
-
-save_user_nvgprs:
- lwz r8,TI_SIGFRAME(r12)
-
-.macro savewords start, end
- 1: stw \start,4*(\start)(r8)
- .section __ex_table,"a"
- .align 2
- .long 1b,save_user_nvgprs_fault
- .previous
- .if \end - \start
- savewords "(\start+1)",\end
- .endif
-.endm
- savewords 14,31
- b save_user_nvgprs_cont
-
-
-save_user_nvgprs_fault:
- li r3,11 /* SIGSEGV */
- lwz r4,TI_TASK(r12)
- bl force_sigsegv
+ b ret_from_except_full
- rlwinm r12,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */
- lwz r9,TI_FLAGS(r12)
- b save_user_nvgprs_cont
-
#ifdef SHOW_SYSCALLS
do_show_syscall:
#ifdef SHOW_SYSCALLS_TASK
stw r0,_TRAP(r1) /* register set saved */
b sys_clone
+ .globl ppc_swapcontext
+ppc_swapcontext:
+ SAVE_NVGPRS(r1)
+ lwz r0,_TRAP(r1)
+ rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */
+ stw r0,_TRAP(r1) /* register set saved */
+ b sys_swapcontext
+
/*
* Top-level page fault handling.
* This is in assembler because if do_page_fault tells us that
/* Check current_thread_info()->flags */
rlwinm r9,r1,0,0,(31-THREAD_SHIFT)
lwz r9,TI_FLAGS(r9)
- andi. r0,r9,(_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL|_TIF_RESTORE_SIGMASK)
+ andi. r0,r9,(_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK|_TIF_NEED_RESCHED)
bne do_work
restore_user:
mtmsrd r10,1
ld r9,TI_FLAGS(r12)
li r11,-_LAST_ERRNO
- andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL|_TIF_SAVE_NVGPRS|_TIF_NOERROR|_TIF_RESTORE_SIGMASK)
+ andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
bne- syscall_exit_work
cmpld r3,r11
ld r5,_CCR(r1)
If TIF_NOERROR is set, just save r3 as it is. */
andi. r0,r9,_TIF_RESTOREALL
- bne- 2f
- cmpld r3,r11 /* r10 is -LAST_ERRNO */
+ beq+ 0f
+ REST_NVGPRS(r1)
+ b 2f
+0: cmpld r3,r11 /* r10 is -LAST_ERRNO */
blt+ 1f
andi. r0,r9,_TIF_NOERROR
bne- 1f
2: andi. r0,r9,(_TIF_PERSYSCALL_MASK)
beq 4f
- /* Clear per-syscall TIF flags if any are set, but _leave_
- _TIF_SAVE_NVGPRS set in r9 since we haven't dealt with that
- yet. */
+ /* Clear per-syscall TIF flags if any are set. */
li r11,_TIF_PERSYSCALL_MASK
addi r12,r12,TI_FLAGS
stdcx. r10,0,r12
bne- 3b
subi r12,r12,TI_FLAGS
-
-4: bl .save_nvgprs
- /* Anything else left to do? */
- andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_SAVE_NVGPRS)
+
+4: /* Anything else left to do? */
+ andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
beq .ret_from_except_lite
/* Re-enable interrupts */
ori r10,r10,MSR_EE
mtmsrd r10,1
- andi. r0,r9,_TIF_SAVE_NVGPRS
- bne save_user_nvgprs
-
- /* If tracing, re-enable interrupts and do it */
-save_user_nvgprs_cont:
- andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
- beq 5f
-
+ bl .save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
bl .do_syscall_trace_leave
- REST_NVGPRS(r1)
- clrrdi r12,r1,THREAD_SHIFT
-
- /* Disable interrupts again and handle other work if any */
-5: mfmsr r10
- rldicl r10,r10,48,1
- rotldi r10,r10,16
- mtmsrd r10,1
-
- b .ret_from_except_lite
+ b .ret_from_except
/* Save non-volatile GPRs, if not already saved. */
_GLOBAL(save_nvgprs)
std r0,_TRAP(r1)
blr
-
-save_user_nvgprs:
- ld r10,TI_SIGFRAME(r12)
- andi. r0,r9,_TIF_32BIT
- beq- save_user_nvgprs_64
-
- /* 32-bit save to userspace */
-
-.macro savewords start, end
- 1: stw \start,4*(\start)(r10)
- .section __ex_table,"a"
- .align 3
- .llong 1b,save_user_nvgprs_fault
- .previous
- .if \end - \start
- savewords "(\start+1)",\end
- .endif
-.endm
- savewords 14,31
- b save_user_nvgprs_cont
-
-save_user_nvgprs_64:
- /* 64-bit save to userspace */
-
-.macro savelongs start, end
- 1: std \start,8*(\start)(r10)
- .section __ex_table,"a"
- .align 3
- .llong 1b,save_user_nvgprs_fault
- .previous
- .if \end - \start
- savelongs "(\start+1)",\end
- .endif
-.endm
- savelongs 14,31
- b save_user_nvgprs_cont
-
-save_user_nvgprs_fault:
- li r3,11 /* SIGSEGV */
- ld r4,TI_TASK(r12)
- bl .force_sigsegv
-
- clrrdi r12,r1,THREAD_SHIFT
- ld r9,TI_FLAGS(r12)
- b save_user_nvgprs_cont
/*
* The sigsuspend and rt_sigsuspend system calls can call do_signal
bl .sys_clone
b syscall_exit
+_GLOBAL(ppc32_swapcontext)
+ bl .save_nvgprs
+ bl .compat_sys_swapcontext
+ b syscall_exit
+
+_GLOBAL(ppc64_swapcontext)
+ bl .save_nvgprs
+ bl .sys_swapcontext
+ b syscall_exit
+
_GLOBAL(ret_from_fork)
bl .schedule_tail
REST_NVGPRS(r1)
mr r28,r6
mr r27,r7
+ /* Align the stack to 16-byte boundary for broken yaboot */
+ rldicr r1,r1,0,59
+
/* Make sure we are running in 64 bits mode */
bl .enable_64b_mode
if (size == 0)
continue;
prom_debug(" %x %x\n", base, size);
- if (base == 0)
+ if (base == 0 && (RELOC(of_platform) & PLATFORM_LPAR))
RELOC(rmo_top) = size;
if ((base + size) > RELOC(ram_top))
RELOC(ram_top) = base + size;
regs->result);
if ((test_thread_flag(TIF_SYSCALL_TRACE)
-#ifdef CONFIG_PPC64
- || test_thread_flag(TIF_SINGLESTEP)
-#endif
- )
+ || test_thread_flag(TIF_SINGLESTEP))
&& (current->ptrace & PT_PTRACED))
do_syscall_trace();
}
elf_greg_t64 *gregs = (elf_greg_t64 *)regs;
int i;
- if (!FULL_REGS(regs)) {
- set_thread_flag(TIF_SAVE_NVGPRS);
- current_thread_info()->nvgprs_frame = frame->mc_gregs;
- }
+ WARN_ON(!FULL_REGS(regs));
for (i = 0; i <= PT_RESULT; i ++) {
if (i == 14 && !FULL_REGS(regs))
static inline int save_general_regs(struct pt_regs *regs,
struct mcontext __user *frame)
{
- if (!FULL_REGS(regs)) {
- /* Zero out the unsaved GPRs to avoid information
- leak, and set TIF_SAVE_NVGPRS to ensure that the
- registers do actually get saved later. */
- memset(®s->gpr[14], 0, 18 * sizeof(unsigned long));
- current_thread_info()->nvgprs_frame = &frame->mc_gregs;
- set_thread_flag(TIF_SAVE_NVGPRS);
- }
-
+ WARN_ON(!FULL_REGS(regs));
return __copy_to_user(&frame->mc_gregs, regs, GP_REGS_SIZE);
}
}
long sys_swapcontext(struct ucontext __user *old_ctx,
- struct ucontext __user *new_ctx,
- int ctx_size, int r6, int r7, int r8, struct pt_regs *regs)
+ struct ucontext __user *new_ctx,
+ int ctx_size, int r6, int r7, int r8, struct pt_regs *regs)
{
unsigned char tmp;
err |= __put_user(0, &sc->v_regs);
#endif /* CONFIG_ALTIVEC */
err |= __put_user(&sc->gp_regs, &sc->regs);
- if (!FULL_REGS(regs)) {
- /* Zero out the unsaved GPRs to avoid information
- leak, and set TIF_SAVE_NVGPRS to ensure that the
- registers do actually get saved later. */
- memset(®s->gpr[14], 0, 18 * sizeof(unsigned long));
- set_thread_flag(TIF_SAVE_NVGPRS);
- current_thread_info()->nvgprs_frame = &sc->gp_regs;
- }
+ WARN_ON(!FULL_REGS(regs));
err |= __copy_to_user(&sc->gp_regs, regs, GP_REGS_SIZE);
err |= __copy_to_user(&sc->fp_regs, ¤t->thread.fpr, FP_REGS_SIZE);
err |= __put_user(signr, &sc->signal);
COMPAT_SYS(clock_gettime)
COMPAT_SYS(clock_getres)
COMPAT_SYS(clock_nanosleep)
-COMPAT_SYS(swapcontext)
+SYSX(ppc64_swapcontext,ppc32_swapcontext,ppc_swapcontext)
COMPAT_SYS(tgkill)
COMPAT_SYS(utimes)
COMPAT_SYS(statfs64)
return;
}
+ local_irq_enable();
+
/* Try to emulate it if we should. */
if (reason & (REASON_ILLEGAL | REASON_PRIVILEGED)) {
switch (emulate_instruction(regs)) {
unsigned long offset = address - vma->vm_start;
struct page *pg;
#ifdef CONFIG_PPC64
- void *vbase = test_thread_flag(TIF_32BIT) ?
- vdso32_kbase : vdso64_kbase;
+ void *vbase = (vma->vm_mm->task_size > TASK_SIZE_USER32) ?
+ vdso64_kbase : vdso32_kbase;
#else
void *vbase = vdso32_kbase;
#endif
.cfi_startproc
/* check for update count & load values */
1: ld r8,CFG_TB_UPDATE_COUNT(r3)
- andi. r0,r4,1 /* pending update ? loop */
+ andi. r0,r8,1 /* pending update ? loop */
bne- 1b
- xor r0,r4,r4 /* create dependency */
+ xor r0,r8,r8 /* create dependency */
add r3,r3,r0
/* Get TB & offset it */
#ifdef CONFIG_PPC_ISERIES
if (_machine == PLATFORM_ISERIES_LPAR)
ret = iSeries_hpte_insert(hpteg, va,
- virt_to_abs(paddr),
+ __pa(vaddr),
tmp_mode,
HPTE_V_BOLTED,
psize);
#include <asm/pmac_feature.h>
#include <asm/pmac_pfunc.h>
+#undef DEBUG
+#ifdef DEBUG
#define DBG(fmt...) printk(fmt)
+#else
+#define DBG(fmt...)
+#endif
static irqreturn_t macio_gpio_irq(int irq, void *data, struct pt_regs *regs)
{
#define LOG_PARSE(fmt...)
#define LOG_ERROR(fmt...) printk(fmt)
#define LOG_BLOB(t,b,c)
+
+#undef DEBUG
+#ifdef DEBUG
#define DBG(fmt...) printk(fmt)
+#else
+#define DBG(fmt...)
+#endif
/* Command numbers */
#define PMF_CMD_LIST 0
*/
static void (*pmac_tb_freeze)(int freeze);
-static unsigned long timebase;
+static u64 timebase;
static int tb_req;
static void smp_core99_give_timebase(void)
}
EXPORT_SYMBOL_GPL(eeh_add_device_tree_early);
+void eeh_add_device_tree_late(struct pci_bus *bus)
+{
+ struct pci_dev *dev;
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ eeh_add_device_late(dev);
+ if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+ struct pci_bus *subbus = dev->subordinate;
+ if (subbus)
+ eeh_add_device_tree_late(subbus);
+ }
+ }
+}
+
/**
* eeh_add_device_late - perform EEH initialization for the indicated pci device
* @dev: pci device for which to set up EEH
static inline const char * pcid_name (struct pci_dev *pdev)
{
- if (pdev->dev.driver)
+ if (pdev && pdev->dev.driver)
return pdev->dev.driver->name;
return "";
}
}
}
}
+
+ eeh_add_device_tree_late(bus);
}
EXPORT_SYMBOL_GPL(pcibios_fixup_new_pci_devices);
{
u8 sec_busno;
struct pci_bus *child_bus;
- struct pci_dev *child_dev;
/* Get busno of downstream bus */
pci_read_config_byte(dev, PCI_SECONDARY_BUS, &sec_busno);
pci_scan_child_bus(child_bus);
- list_for_each_entry(child_dev, &child_bus->devices, bus_list) {
- eeh_add_device_late(child_dev);
- }
-
/* Fixup new pci devices without touching bus struct */
pcibios_fixup_new_pci_devices(child_bus, 0);
eeh_add_device_tree_early(dn);
- /* pci_scan_slot should find all children */
- slotno = PCI_SLOT(PCI_DN(dn->child)->devfn);
- num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
- if (num) {
- pcibios_fixup_new_pci_devices(bus, 1);
- pci_bus_add_devices(bus);
- }
+ if (_machine == PLATFORM_PSERIES_LPAR) {
+ /* use ofdt-based probe */
+ of_scan_bus(dn, bus);
+ if (!list_empty(&bus->devices)) {
+ pcibios_fixup_new_pci_devices(bus, 0);
+ pci_bus_add_devices(bus);
+ }
+ } else {
+ /* use legacy probe */
+ slotno = PCI_SLOT(PCI_DN(dn->child)->devfn);
+ num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
+ if (num) {
+ pcibios_fixup_new_pci_devices(bus, 1);
+ pci_bus_add_devices(bus);
+ }
- list_for_each_entry(dev, &bus->devices, bus_list) {
- eeh_add_device_late (dev);
- if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
- pcibios_pci_config_bridge(dev);
+ list_for_each_entry(dev, &bus->devices, bus_list)
+ if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
+ pcibios_pci_config_bridge(dev);
}
}
EXPORT_SYMBOL_GPL(pcibios_add_pci_devices);
DEFINE(CPU_SPEC_FEATURES, offsetof(struct cpu_spec, cpu_features));
DEFINE(CPU_SPEC_SETUP, offsetof(struct cpu_spec, cpu_setup));
- DEFINE(TI_SIGFRAME, offsetof(struct thread_info, nvgprs_frame));
DEFINE(TI_TASK, offsetof(struct thread_info, task));
DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain));
DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
MTMSRD(r10)
lwz r9,TI_FLAGS(r12)
li r8,-_LAST_ERRNO
- andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL)
+ andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
bne- syscall_exit_work
cmplw 0,r3,r8
blt+ syscall_exit_cont
syscall_exit_work:
andi. r0,r9,_TIF_RESTOREALL
- bne- 2f
- cmplw 0,r3,r8
+ beq+ 0f
+ REST_NVGPRS(r1)
+ b 2f
+0: cmplw 0,r3,r8
blt+ 1f
andi. r0,r9,_TIF_NOERROR
bne- 1f
2: andi. r0,r9,(_TIF_PERSYSCALL_MASK)
beq 4f
- /* Clear per-syscall TIF flags if any are set, but _leave_
- _TIF_SAVE_NVGPRS set in r9 since we haven't dealt with that
- yet. */
+ /* Clear per-syscall TIF flags if any are set. */
li r11,_TIF_PERSYSCALL_MASK
addi r12,r12,TI_FLAGS
subi r12,r12,TI_FLAGS
4: /* Anything which requires enabling interrupts? */
- andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_SAVE_NVGPRS)
- beq 7f
+ andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
+ beq ret_from_except
+
+ /* Re-enable interrupts */
+ ori r10,r10,MSR_EE
+ SYNC
+ MTMSRD(r10)
/* Save NVGPRS if they're not saved already */
lwz r4,TRAP(r1)
SAVE_NVGPRS(r1)
li r4,0xc00
stw r4,TRAP(r1)
-
- /* Re-enable interrupts */
-5: ori r10,r10,MSR_EE
- SYNC
- MTMSRD(r10)
-
- andi. r0,r9,_TIF_SAVE_NVGPRS
- bne save_user_nvgprs
-
-save_user_nvgprs_cont:
- andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
- beq 7f
-
+5:
addi r3,r1,STACK_FRAME_OVERHEAD
bl do_syscall_trace_leave
- REST_NVGPRS(r1)
-
-6: lwz r3,GPR3(r1)
- LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */
- SYNC
- MTMSRD(r10) /* disable interrupts again */
- rlwinm r12,r1,0,0,18 /* current_thread_info() */
- lwz r9,TI_FLAGS(r12)
-7:
- andi. r0,r9,_TIF_NEED_RESCHED
- bne 8f
- lwz r5,_MSR(r1)
- andi. r5,r5,MSR_PR
- beq ret_from_except
- andi. r0,r9,_TIF_SIGPENDING
- beq ret_from_except
- b do_user_signal
-8:
- ori r10,r10,MSR_EE
- SYNC
- MTMSRD(r10) /* re-enable interrupts */
- bl schedule
- b 6b
-
-save_user_nvgprs:
- lwz r8,TI_SIGFRAME(r12)
-
-.macro savewords start, end
- 1: stw \start,4*(\start)(r8)
- .section __ex_table,"a"
- .align 2
- .long 1b,save_user_nvgprs_fault
- .previous
- .if \end - \start
- savewords "(\start+1)",\end
- .endif
-.endm
- savewords 14,31
- b save_user_nvgprs_cont
-
-
-save_user_nvgprs_fault:
- li r3,11 /* SIGSEGV */
- lwz r4,TI_TASK(r12)
- bl force_sigsegv
+ b ret_from_except_full
- rlwinm r12,r1,0,0,18 /* current_thread_info() */
- lwz r9,TI_FLAGS(r12)
- b save_user_nvgprs_cont
-
#ifdef SHOW_SYSCALLS
do_show_syscall:
#ifdef SHOW_SYSCALLS_TASK
stw r0,TRAP(r1) /* register set saved */
b sys_clone
+ .globl ppc_swapcontext
+ppc_swapcontext:
+ SAVE_NVGPRS(r1)
+ lwz r0,TRAP(r1)
+ rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */
+ stw r0,TRAP(r1) /* register set saved */
+ b sys_swapcontext
+
/*
* Top-level page fault handling.
* This is in assembler because if do_page_fault tells us that
/* Check current_thread_info()->flags */
rlwinm r9,r1,0,0,18
lwz r9,TI_FLAGS(r9)
- andi. r0,r9,(_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL)
+ andi. r0,r9,(_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK|_TIF_NEED_RESCHED)
bne do_work
restore_user:
* arch/s390/lib/spinlock.c
* Out of line spinlock code.
*
- * S390 version
- * Copyright (C) 2004 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Copyright (C) IBM Corp. 2004, 2006
* Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
*/
_diag44();
count = spin_retry;
}
+ if (__raw_spin_is_locked(lp))
+ continue;
if (_raw_compare_and_swap(&lp->lock, 0, pc) == 0)
return;
}
int count = spin_retry;
while (count-- > 0) {
+ if (__raw_spin_is_locked(lp))
+ continue;
if (_raw_compare_and_swap(&lp->lock, 0, pc) == 0)
return 1;
}
_diag44();
count = spin_retry;
}
+ if (!__raw_read_can_lock(rw))
+ continue;
old = rw->lock & 0x7fffffffU;
if (_raw_compare_and_swap(&rw->lock, old, old + 1) == old)
return;
int count = spin_retry;
while (count-- > 0) {
+ if (!__raw_read_can_lock(rw))
+ continue;
old = rw->lock & 0x7fffffffU;
if (_raw_compare_and_swap(&rw->lock, old, old + 1) == old)
return 1;
_diag44();
count = spin_retry;
}
+ if (!__raw_write_can_lock(rw))
+ continue;
if (_raw_compare_and_swap(&rw->lock, 0, 0x80000000) == 0)
return;
}
int count = spin_retry;
while (count-- > 0) {
+ if (!__raw_write_can_lock(rw))
+ continue;
if (_raw_compare_and_swap(&rw->lock, 0, 0x80000000) == 0)
return 1;
}
0: srst %r2,%r1
jo 0b
sacf 0
- jh 1f # \0 found in string ?
ahi %r2,1 # strnlen_user result includes the \0
-1: slr %r2,%r3
+ # or return count+1 if \0 not found
+ slr %r2,%r3
br %r14
2: sacf 0
- lhi %r2,-EFAULT
+ slr %r2,%r2 # return 0 on exception
br %r14
.section __ex_table,"a"
.long 0b,2b
0: srst %r2,%r1
jo 0b
sacf 0
- jh 1f # \0 found in string ?
aghi %r2,1 # strnlen_user result includes the \0
-1: slgr %r2,%r3
+ # or return count+1 if \0 not found
+ slgr %r2,%r3
br %r14
2: sacf 0
- lghi %r2,-EFAULT
+ slgr %r2,%r2 # return 0 on exception
br %r14
.section __ex_table,"a"
.quad 0b,2b
endmenu
-source "arch/sh/boards/renesas/hs7751rvoip/Kconfig"
+#source "arch/sh/boards/renesas/hs7751rvoip/Kconfig"
-source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
+#source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
config SH_PCLK_FREQ
int "Peripheral clock frequency (in Hz)"
nop
nop
- .section __ex_table
+ .section __ex_table,"a"
.align 4
.word 1b, __retl_efault, 2b, __retl_efault
.word 3b, __retl_efault, 4b, __retl_efault
mov 0, %o0
.size __do_int_store, .-__do_int_store
- .section __ex_table
+ .section __ex_table,"a"
.word 4b, __retl_efault
.word 5b, __retl_efault
.word 6b, __retl_efault
mov 0, %o0
.size __do_int_load, .-__do_int_load
- .section __ex_table
+ .section __ex_table,"a"
.word 4b, __retl_efault
.word 5b, __retl_efault
.word 6b, __retl_efault
.align 4; \
99: retl; \
mov 1, %o0; \
- .section __ex_table; \
+ .section __ex_table,"a";\
.align 4; \
.word 98b, 99b; \
.text; \
.align 4; \
99: retl; \
mov 1, %o0; \
- .section __ex_table; \
+ .section __ex_table,"a";\
.align 4; \
.word 98b, 99b; \
.text; \
.align 4; \
99: retl; \
mov 1, %o0; \
- .section __ex_table; \
+ .section __ex_table,"a";\
.align 4; \
.word 98b, 99b; \
.text; \
.align 4; \
99: retl; \
mov 1, %o0; \
- .section __ex_table; \
+ .section __ex_table,"a";\
.align 4; \
.word 98b, 99b; \
.text; \
.align 4; \
99: retl; \
mov %o1, %o0; \
- .section __ex_table; \
+ .section __ex_table,"a";\
.align 4; \
.word 98b, 99b; \
.text; \
.align 4; \
99: retl; \
mov 1, %o0; \
- .section __ex_table; \
+ .section __ex_table,"a";\
.align 4; \
.word 98b, 99b; \
.text; \
.align 4; \
99: retl; \
mov -1, %o0; \
- .section __ex_table; \
+ .section __ex_table,"a";\
.align 4; \
.word 98b, 99b; \
.text; \
.align 4; \
99: retl; \
mov -1, %o0; \
- .section __ex_table; \
+ .section __ex_table,"a";\
.align 4; \
.word 98b, 99b; \
.text; \
retl
clr %o0
- .section __ex_table,#alloc
+ .section __ex_table,"a"
.align 4
.word 10b, 30b
add %o2, %o3, %o0
.size __strncpy_from_user, .-__strncpy_from_user
- .section __ex_table,#alloc
+ .section __ex_table,"a"
.align 4
.word 60b, __retl_efault
.word 61b, __retl_efault
ba,pt %xcc, ret_from_solaris
nop
- .section __ex_table,#alloc
+ .section __ex_table,"a"
.align 4
.word exen, exenf
#include <asm/system.h>
#include <asm/pgtable.h>
+void (*pm_power_off)(void) = NULL;
+EXPORT_SYMBOL(pm_power_off);
+
extern void ret_from_fork (void);
irq_exit();
}
-int __initdata unsync_tsc_on_multicluster;
-
/*
* oem_force_hpet_timer -- force HPET mode for some boxes.
*
* Thus far, the major user of this is IBM's Summit2 series:
*
- * Some clustered boxes may have unsynced TSC problems if they are
+ * Clustered boxes may have unsynced TSC problems if they are
* multi-chassis. Use available data to take a good guess.
* If in doubt, go HPET.
*/
unsigned id;
DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS);
- /* Only do this check on IBM machines - big Unisys systems
- use multiple clusters too, but have synchronized TSC */
- if (!unsync_tsc_on_multicluster)
- return 0;
-
bitmap_zero(clustermap, NUM_APIC_CLUSTERS);
for (i = 0; i < NR_CPUS; i++) {
"\tmovl %0,%%ss\n"
"\tmovl %0,%%fs\n"
"\tmovl %0,%%gs\n"
- : : "a" (__KERNEL_DS)
+ : : "a" (__KERNEL_DS) : "memory"
);
}
bool
default y
+config RWSEM_GENERIC_SPINLOCK
+ bool
+ default y
+
source "init/Kconfig"
menu "Processor type and features"
struct task_struct *current_set[NR_CPUS] = {&init_task, };
+void (*pm_power_off)(void) = NULL;
+EXPORT_SYMBOL(pm_power_off);
+
#if XCHAL_CP_NUM > 0
CFQ_CFQQ_FLAG_fifo_expire,
CFQ_CFQQ_FLAG_idle_window,
CFQ_CFQQ_FLAG_prio_changed,
- CFQ_CFQQ_FLAG_expired,
};
#define CFQ_CFQQ_FNS(name) \
CFQ_CFQQ_FNS(fifo_expire);
CFQ_CFQQ_FNS(idle_window);
CFQ_CFQQ_FNS(prio_changed);
-CFQ_CFQQ_FNS(expired);
#undef CFQ_CFQQ_FNS
enum cfq_rq_state_flags {
*/
static inline void cfq_schedule_dispatch(struct cfq_data *cfqd)
{
- if (!cfqd->rq_in_driver && cfqd->busy_queues)
+ if (cfqd->busy_queues)
kblockd_schedule_work(&cfqd->unplug_work);
}
cfqq->slice_left = 0;
cfq_clear_cfqq_must_alloc_slice(cfqq);
cfq_clear_cfqq_fifo_expire(cfqq);
- cfq_clear_cfqq_expired(cfqq);
}
cfqd->active_queue = cfqq;
}
+/*
+ * current cfqq expired its slice (or was too idle), select new one
+ */
+static void
+__cfq_slice_expired(struct cfq_data *cfqd, struct cfq_queue *cfqq,
+ int preempted)
+{
+ unsigned long now = jiffies;
+
+ if (cfq_cfqq_wait_request(cfqq))
+ del_timer(&cfqd->idle_slice_timer);
+
+ if (!preempted && !cfq_cfqq_dispatched(cfqq)) {
+ cfqq->service_last = now;
+ cfq_schedule_dispatch(cfqd);
+ }
+
+ cfq_clear_cfqq_must_dispatch(cfqq);
+ cfq_clear_cfqq_wait_request(cfqq);
+
+ /*
+ * store what was left of this slice, if the queue idled out
+ * or was preempted
+ */
+ if (time_after(cfqq->slice_end, now))
+ cfqq->slice_left = cfqq->slice_end - now;
+ else
+ cfqq->slice_left = 0;
+
+ if (cfq_cfqq_on_rr(cfqq))
+ cfq_resort_rr_list(cfqq, preempted);
+
+ if (cfqq == cfqd->active_queue)
+ cfqd->active_queue = NULL;
+
+ if (cfqd->active_cic) {
+ put_io_context(cfqd->active_cic->ioc);
+ cfqd->active_cic = NULL;
+ }
+
+ cfqd->dispatch_slice = 0;
+}
+
+static inline void cfq_slice_expired(struct cfq_data *cfqd, int preempted)
+{
+ struct cfq_queue *cfqq = cfqd->active_queue;
+
+ if (cfqq)
+ __cfq_slice_expired(cfqd, cfqq, preempted);
+}
+
/*
* 0
* 0,1
static struct cfq_queue *cfq_set_active_queue(struct cfq_data *cfqd)
{
- struct cfq_queue *cfqq;
-
- /*
- * if current queue is expired but not done with its requests yet,
- * wait for that to happen
- */
- if ((cfqq = cfqd->active_queue) != NULL) {
- if (cfq_cfqq_expired(cfqq) && cfq_cfqq_dispatched(cfqq))
- return NULL;
- }
+ struct cfq_queue *cfqq = NULL;
/*
* if current list is non-empty, grab first entry. if it is empty,
return cfqq;
}
-/*
- * current cfqq expired its slice (or was too idle), select new one
- */
-static void
-__cfq_slice_expired(struct cfq_data *cfqd, struct cfq_queue *cfqq,
- int preempted)
-{
- unsigned long now = jiffies;
-
- if (cfq_cfqq_wait_request(cfqq))
- del_timer(&cfqd->idle_slice_timer);
-
- if (!preempted && !cfq_cfqq_dispatched(cfqq))
- cfqq->service_last = now;
-
- cfq_clear_cfqq_must_dispatch(cfqq);
- cfq_clear_cfqq_wait_request(cfqq);
-
- /*
- * store what was left of this slice, if the queue idled out
- * or was preempted
- */
- if (time_after(cfqq->slice_end, now))
- cfqq->slice_left = cfqq->slice_end - now;
- else
- cfqq->slice_left = 0;
-
- if (cfq_cfqq_on_rr(cfqq))
- cfq_resort_rr_list(cfqq, preempted);
-
- if (cfqq == cfqd->active_queue)
- cfqd->active_queue = NULL;
-
- if (cfqd->active_cic) {
- put_io_context(cfqd->active_cic->ioc);
- cfqd->active_cic = NULL;
- }
-
- cfqd->dispatch_slice = 0;
-}
-
-static inline void cfq_slice_expired(struct cfq_data *cfqd, int preempted)
-{
- struct cfq_queue *cfqq = cfqd->active_queue;
-
- if (cfqq) {
- /*
- * use deferred expiry, if there are requests in progress as
- * not to disturb the slice of the next queue
- */
- if (cfq_cfqq_dispatched(cfqq))
- cfq_mark_cfqq_expired(cfqq);
- else
- __cfq_slice_expired(cfqd, cfqq, preempted);
- }
-}
-
static int cfq_arm_slice_timer(struct cfq_data *cfqd, struct cfq_queue *cfqq)
{
+ unsigned long sl;
+
WARN_ON(!RB_EMPTY(&cfqq->sort_list));
WARN_ON(cfqq != cfqd->active_queue);
cfq_mark_cfqq_must_dispatch(cfqq);
cfq_mark_cfqq_wait_request(cfqq);
- if (!timer_pending(&cfqd->idle_slice_timer)) {
- unsigned long slice_left = min(cfqq->slice_end - 1, (unsigned long) cfqd->cfq_slice_idle);
-
- cfqd->idle_slice_timer.expires = jiffies + slice_left;
- add_timer(&cfqd->idle_slice_timer);
- }
-
+ sl = min(cfqq->slice_end - 1, (unsigned long) cfqd->cfq_slice_idle);
+ mod_timer(&cfqd->idle_slice_timer, jiffies + sl);
return 1;
}
if (!cfqq)
goto new_queue;
- if (cfq_cfqq_expired(cfqq))
- goto new_queue;
-
/*
* slice has expired
*/
BUG_ON(cfqq->allocated[READ] + cfqq->allocated[WRITE]);
BUG_ON(cfq_cfqq_on_rr(cfqq));
- if (unlikely(cfqd->active_queue == cfqq)) {
+ if (unlikely(cfqd->active_queue == cfqq))
__cfq_slice_expired(cfqd, cfqq, 0);
- cfq_schedule_dispatch(cfqd);
- }
cfq_put_cfqd(cfqq->cfqd);
spin_lock(q->queue_lock);
- if (unlikely(cic->cfqq == cfqd->active_queue)) {
+ if (unlikely(cic->cfqq == cfqd->active_queue))
__cfq_slice_expired(cfqd, cic->cfqq, 0);
- cfq_schedule_dispatch(cfqd);
- }
cfq_put_queue(cic->cfqq);
cic->cfqq = NULL;
cfqq->service_last = now;
cfq_resort_rr_list(cfqq, 0);
}
- if (cfq_cfqq_expired(cfqq)) {
- __cfq_slice_expired(cfqd, cfqq, 0);
- cfq_schedule_dispatch(cfqd);
- }
+ cfq_schedule_dispatch(cfqd);
}
if (cfq_crq_is_sync(crq))
* Different hardware can have different requirements as to what pages
* it can do I/O directly to. A low level driver can call
* blk_queue_bounce_limit to have lower memory pages allocated as bounce
- * buffers for doing I/O to pages residing above @page. By default
- * the block layer sets this to the highest numbered "low" memory page.
+ * buffers for doing I/O to pages residing above @page.
**/
void blk_queue_bounce_limit(request_queue_t *q, u64 dma_addr)
{
unsigned long bounce_pfn = dma_addr >> PAGE_SHIFT;
-
- /*
- * set appropriate bounce gfp mask -- unfortunately we don't have a
- * full 4GB zone, so we have to resort to low memory for any bounces.
- * ISA has its own < 16MB zone.
- */
- if (bounce_pfn < blk_max_low_pfn) {
- BUG_ON(dma_addr < BLK_BOUNCE_ISA);
+ int dma = 0;
+
+ q->bounce_gfp = GFP_NOIO;
+#if BITS_PER_LONG == 64
+ /* Assume anything <= 4GB can be handled by IOMMU.
+ Actually some IOMMUs can handle everything, but I don't
+ know of a way to test this here. */
+ if (bounce_pfn < (0xffffffff>>PAGE_SHIFT))
+ dma = 1;
+ q->bounce_pfn = max_low_pfn;
+#else
+ if (bounce_pfn < blk_max_low_pfn)
+ dma = 1;
+ q->bounce_pfn = bounce_pfn;
+#endif
+ if (dma) {
init_emergency_isa_pool();
q->bounce_gfp = GFP_NOIO | GFP_DMA;
- } else
- q->bounce_gfp = GFP_NOIO;
-
- q->bounce_pfn = bounce_pfn;
+ q->bounce_pfn = bounce_pfn;
+ }
}
EXPORT_SYMBOL(blk_queue_bounce_limit);
}
-static int __init
+static int __devinit
fore200e_pca_map(struct fore200e* fore200e)
{
DPRINTK(2, "device %s being mapped in memory\n", fore200e->name);
}
-static int __init
+static int __devinit
fore200e_pca_configure(struct fore200e* fore200e)
{
struct pci_dev* pci_dev = (struct pci_dev*)fore200e->bus_dev;
}
-static int __init
+static int __devinit
fore200e_irq_request(struct fore200e* fore200e)
{
if (request_irq(fore200e->irq, fore200e_interrupt, SA_SHIRQ, fore200e->name, fore200e->atm_dev) < 0) {
}
-static int __init
+static int __devinit
fore200e_get_esi(struct fore200e* fore200e)
{
struct prom_data* prom = fore200e_kmalloc(sizeof(struct prom_data), GFP_KERNEL | GFP_DMA);
}
-static int __init
+static int __devinit
fore200e_alloc_rx_buf(struct fore200e* fore200e)
{
int scheme, magn, nbr, size, i;
}
-static int __init
+static int __devinit
fore200e_init_bs_queue(struct fore200e* fore200e)
{
int scheme, magn, i;
}
-static int __init
+static int __devinit
fore200e_init_rx_queue(struct fore200e* fore200e)
{
struct host_rxq* rxq = &fore200e->host_rxq;
}
-static int __init
+static int __devinit
fore200e_init_tx_queue(struct fore200e* fore200e)
{
struct host_txq* txq = &fore200e->host_txq;
}
-static int __init
+static int __devinit
fore200e_init_cmd_queue(struct fore200e* fore200e)
{
struct host_cmdq* cmdq = &fore200e->host_cmdq;
}
-static int __init
+static int __devinit
fore200e_initialize(struct fore200e* fore200e)
{
struct cp_queues __iomem * cpq;
}
-static void __init
+static void __devinit
fore200e_monitor_putc(struct fore200e* fore200e, char c)
{
struct cp_monitor __iomem * monitor = fore200e->cp_monitor;
}
-static int __init
+static int __devinit
fore200e_monitor_getc(struct fore200e* fore200e)
{
struct cp_monitor __iomem * monitor = fore200e->cp_monitor;
}
-static void __init
+static void __devinit
fore200e_monitor_puts(struct fore200e* fore200e, char* str)
{
while (*str) {
}
-static int __init
+static int __devinit
fore200e_start_fw(struct fore200e* fore200e)
{
int ok;
}
-static int __init
+static int __devinit
fore200e_load_fw(struct fore200e* fore200e)
{
u32* fw_data = (u32*) fore200e->bus->fw_data;
}
-static int __init
+static int __devinit
fore200e_register(struct fore200e* fore200e)
{
struct atm_dev* atm_dev;
}
-static int __init
+static int __devinit
fore200e_init(struct fore200e* fore200e)
{
if (fore200e_register(fore200e) < 0)
return -EBUSY;
fore200e_supply(fore200e);
-
+
/* all done, board initialization is now complete */
fore200e->state = FORE200E_STATE_COMPLETE;
return 0;
#include <linux/timer.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/random.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include "DAC960.h"
Command->SegmentCount, Command->DmaDirection);
if (!end_that_request_first(Request, UpToDate, Command->BlockCount)) {
-
+ add_disk_randomness(Request->rq_disk);
end_that_request_last(Request, UpToDate);
if (Command->Completion) {
rng_hw_none,
rng_hw_intel,
rng_hw_amd,
+#ifdef __i386__
rng_hw_via,
+#endif
rng_hw_geode,
};
cnodeid_t node, maxn = -1;
if (!ia64_platform_is("sn2"))
- return -1;
+ return 0;
/*
* Sanity check the cycles/sec variable
*
* (C) 2000,2001,2002,2003,2004 Omnikey AG
*
- * (C) 2005 Harald Welte <laforge@gnumonks.org>
+ * (C) 2005-2006 Harald Welte <laforge@gnumonks.org>
* - Adhere to Kernel CodingStyle
* - Port to 2.6.13 "new" style PCMCIA
* - Check for copy_{from,to}_user return values
* - Use nonseekable_open()
+ * - add class interface for udev device creation
*
* All rights reserved. Licensed under dual BSD/GPL license.
*/
#else
#define DEBUGP(n, rdr, x, args...)
#endif
-static char *version = "cm4000_cs.c v2.4.0gm5 - All bugs added by Harald Welte";
+static char *version = "cm4000_cs.c v2.4.0gm6 - All bugs added by Harald Welte";
#define T_1SEC (HZ)
#define T_10MSEC msecs_to_jiffies(10)
/*queue*/ 4*sizeof(wait_queue_head_t))
static dev_link_t *dev_table[CM4000_MAX_DEV];
+static struct class *cmm_class;
/* This table doesn't use spaces after the comma between fields and thus
* violates CodingStyle. However, I don't really think wrapping it around will
link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
cm4000_config(link, i);
+ class_device_create(cmm_class, NULL, MKDEV(major, i), NULL,
+ "cmm%d", i);
+
return 0;
}
dev_table[devno] = NULL;
kfree(dev);
+ class_device_destroy(cmm_class, MKDEV(major, devno));
+
return;
}
static int __init cmm_init(void)
{
+ int rc;
+
printk(KERN_INFO "%s\n", version);
- pcmcia_register_driver(&cm4000_driver);
+
+ cmm_class = class_create(THIS_MODULE, "cardman_4000");
+ if (!cmm_class)
+ return -1;
+
+ rc = pcmcia_register_driver(&cm4000_driver);
+ if (rc < 0)
+ return rc;
+
major = register_chrdev(0, DEVICE_NAME, &cm4000_fops);
if (major < 0) {
printk(KERN_WARNING MODULE_NAME
printk(KERN_INFO MODULE_NAME ": unloading\n");
pcmcia_unregister_driver(&cm4000_driver);
unregister_chrdev(major, DEVICE_NAME);
+ class_destroy(cmm_class);
};
module_init(cmm_init);
*
* (c) 2000-2004 Omnikey AG (http://www.omnikey.com/)
*
- * (C) 2005 Harald Welte <laforge@gnumonks.org>
+ * (C) 2005-2006 Harald Welte <laforge@gnumonks.org>
* - add support for poll()
* - driver cleanup
* - add waitqueues
* - adhere to linux kernel coding style and policies
* - support 2.6.13 "new style" pcmcia interface
+ * - add class interface for udev device creation
*
* The device basically is a USB CCID compliant device that has been
* attached to an I/O-Mapped FIFO.
#endif
static char *version =
-"OMNIKEY CardMan 4040 v1.1.0gm4 - All bugs added by Harald Welte";
+"OMNIKEY CardMan 4040 v1.1.0gm5 - All bugs added by Harald Welte";
#define CCID_DRIVER_BULK_DEFAULT_TIMEOUT (150*HZ)
#define CCID_DRIVER_ASYNC_POWERUP_TIMEOUT (35*HZ)
static void reader_release(dev_link_t *link);
static int major;
+static struct class *cmx_class;
#define BS_READABLE 0x01
#define BS_WRITABLE 0x02
link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
reader_config(link, i);
+ class_device_create(cmx_class, NULL, MKDEV(major, i), NULL,
+ "cmx%d", i);
+
return 0;
}
dev_table[devno] = NULL;
kfree(dev);
+ class_device_destroy(cmx_class, MKDEV(major, devno));
+
return;
}
static int __init cm4040_init(void)
{
+ int rc;
+
printk(KERN_INFO "%s\n", version);
- pcmcia_register_driver(&reader_driver);
+ cmx_class = class_create(THIS_MODULE, "cardman_4040");
+ if (!cmx_class)
+ return -1;
+
+ rc = pcmcia_register_driver(&reader_driver);
+ if (rc < 0)
+ return rc;
+
major = register_chrdev(0, DEVICE_NAME, &reader_fops);
if (major < 0) {
printk(KERN_WARNING MODULE_NAME
printk(KERN_INFO MODULE_NAME ": unloading\n");
pcmcia_unregister_driver(&reader_driver);
unregister_chrdev(major, DEVICE_NAME);
+ class_destroy(cmx_class);
}
module_init(cm4040_init);
sx_dprintk (SX_DEBUG_RECEIVE, "rxop=%d, c = %d.\n", rx_op, c);
+ /* Don't copy past the end of the hardware receive buffer */
+ if (rx_op + c > 0x100) c = 0x100 - rx_op;
+
+ sx_dprintk (SX_DEBUG_RECEIVE, "c = %d.\n", c);
+
/* Don't copy more bytes than there is room for in the buffer */
c = tty_prepare_flip_string(tty, &rp, c);
sx_dprintk (SX_DEBUG_RECEIVE, "c = %d.\n", c);
- /* Don't copy past the end of the hardware receive buffer */
- if (rx_op + c > 0x100) c = 0x100 - rx_op;
-
- sx_dprintk (SX_DEBUG_RECEIVE, "c = %d.\n", c);
-
/* If for one reason or another, we can't copy more data, we're done! */
if (c == 0) break;
int tx_active;
unsigned char signals; /* serial signal states */
- unsigned int init_error; /* initialization error */
+ int init_error; /* initialization error */
unsigned char *tx_buf;
int tx_count;
t->commit = 0;
t->read = 0;
/* DEBUG ONLY */
- memset(t->data, '*', size);
+/* memset(t->data, '*', size); */
/* printk("Flip recycle %p\n", t); */
return t;
}
# $Id: Kconfig,v 1.4.2.7 2005/07/08 22:05:38 dsp_llnl Exp $
#
-menu 'EDAC - error detection and reporting (RAS)'
+menu 'EDAC - error detection and reporting (RAS) (EXPERIMENTAL)'
config EDAC
- tristate "EDAC core system error reporting"
- depends on X86
+ tristate "EDAC core system error reporting (EXPERIMENTAL)"
+ depends on X86 && EXPERIMENTAL
help
EDAC is designed to report errors in the core system.
These are low-level errors that are reported in the CPU or
supporting chipset: memory errors, cache errors, PCI errors,
thermal throttling, etc.. If unsure, select 'Y'.
+ If this code is reporting problems on your system, please
+ see the EDAC project web pages for more information at:
+
+ <http://bluesmoke.sourceforge.net/>
+
+ and:
+
+ <http://buttersideup.com/edacwiki>
+
+ There is also a mailing list for the EDAC project, which can
+ be found via the sourceforge page.
+
comment "Reporting subsystems"
depends on EDAC
#define EDAC_MC_VERSION "edac_mc Ver: 2.0.0 " __DATE__
+/* For now, disable the EDAC sysfs code. The sysfs interface that EDAC
+ * presents to user space needs more thought, and is likely to change
+ * substantially.
+ */
+#define DISABLE_EDAC_SYSFS
+
#ifdef CONFIG_EDAC_DEBUG
/* Values of 0 to 4 will generate output */
int edac_debug_level = 1;
/* EDAC Controls, setable by module parameter, and sysfs */
static int log_ue = 1;
static int log_ce = 1;
-static int panic_on_ue = 1;
+static int panic_on_ue;
static int poll_msec = 1000;
static int check_pci_parity = 0; /* default YES check PCI parity */
/* START sysfs data and methods */
+#ifndef DISABLE_EDAC_SYSFS
+
static const char *mem_types[] = {
[MEM_EMPTY] = "Empty",
[MEM_RESERVED] = "Reserved",
* /sys/devices/system/edac/mc;
* data structures and methods
*/
+#if 0
static ssize_t memctrl_string_show(void *ptr, char *buffer)
{
char *value = (char*) ptr;
return sprintf(buffer, "%s\n", value);
}
+#endif
static ssize_t memctrl_int_show(void *ptr, char *buffer)
{
};
/* cwrow<id> attribute f*/
+#if 0
MEMCTRL_STRING_ATTR(mc_version,EDAC_MC_VERSION,S_IRUGO,memctrl_string_show,NULL);
+#endif
/* csrow<id> control files */
MEMCTRL_ATTR(panic_on_ue,S_IRUGO|S_IWUSR,memctrl_int_show,memctrl_int_store);
&attr_log_ue,
&attr_log_ce,
&attr_poll_msec,
- &attr_mc_version,
NULL,
};
.default_attrs = (struct attribute **) memctrl_attr,
};
+#endif /* DISABLE_EDAC_SYSFS */
/* Initialize the main sysfs entries for edac:
* /sys/devices/system/edac
* !0 FAILURE
*/
static int edac_sysfs_memctrl_setup(void)
+#ifdef DISABLE_EDAC_SYSFS
+{
+ return 0;
+}
+#else
{
int err=0;
return err;
}
+#endif /* DISABLE_EDAC_SYSFS */
/*
* MC teardown:
*/
static void edac_sysfs_memctrl_teardown(void)
{
+#ifndef DISABLE_EDAC_SYSFS
debugf0("MC: " __FILE__ ": %s()\n", __func__);
/* Unregister the MC's kobject */
/* Unregister the 'edac' object */
sysdev_class_unregister(&edac_class);
+#endif /* DISABLE_EDAC_SYSFS */
}
+#ifndef DISABLE_EDAC_SYSFS
+
/*
* /sys/devices/system/edac/pci;
* data structures and methods
int *count;
};
+
+#if 0
/* Output the list as: vendor_id:device:id<,vendor_id:device_id> */
static ssize_t edac_pci_list_string_show(void *ptr, char *buffer)
{
return count;
}
+#endif
static ssize_t edac_pci_int_show(void *ptr, char *buffer)
{
int *value = ptr;
.store = _store, \
};
+#if 0
static struct list_control pci_whitelist_control = {
.list = pci_whitelist,
.count = &pci_whitelist_count
S_IRUGO|S_IWUSR,
edac_pci_list_string_show,
edac_pci_list_string_store);
+#endif
/* PCI Parity control files */
EDAC_PCI_ATTR(check_pci_parity,S_IRUGO|S_IWUSR,edac_pci_int_show,edac_pci_int_store);
&edac_pci_attr_check_pci_parity,
&edac_pci_attr_panic_on_pci_parity,
&edac_pci_attr_pci_parity_count,
- &edac_pci_attr_pci_parity_whitelist,
- &edac_pci_attr_pci_parity_blacklist,
NULL,
};
.default_attrs = (struct attribute **) edac_pci_attr,
};
+#endif /* DISABLE_EDAC_SYSFS */
+
/**
* edac_sysfs_pci_setup()
*
*/
static int edac_sysfs_pci_setup(void)
+#ifdef DISABLE_EDAC_SYSFS
+{
+ return 0;
+}
+#else
{
int err;
}
return err;
}
-
+#endif /* DISABLE_EDAC_SYSFS */
static void edac_sysfs_pci_teardown(void)
{
+#ifndef DISABLE_EDAC_SYSFS
debugf0("MC: " __FILE__ ": %s()\n", __func__);
kobject_unregister(&edac_pci_kobj);
kobject_put(&edac_pci_kobj);
+#endif
}
+#ifndef DISABLE_EDAC_SYSFS
+
/* EDAC sysfs CSROW data structures and methods */
/* Set of more detailed csrow<id> attribute show/store functions */
.default_attrs = (struct attribute **) mci_attr,
};
+#endif /* DISABLE_EDAC_SYSFS */
+
#define EDAC_DEVICE_SYMLINK "device"
/*
* !0 Failure
*/
static int edac_create_sysfs_mci_device(struct mem_ctl_info *mci)
+#ifdef DISABLE_EDAC_SYSFS
+{
+ return 0;
+}
+#else
{
int i;
int err;
return err;
}
+#endif /* DISABLE_EDAC_SYSFS */
/*
* remove a Memory Controller instance
*/
static void edac_remove_sysfs_mci_device(struct mem_ctl_info *mci)
{
+#ifndef DISABLE_EDAC_SYSFS
int i;
debugf0("MC: " __FILE__ ": %s()\n", __func__);
kobject_unregister(&mci->edac_mci_kobj);
kobject_put(&mci->edac_mci_kobj);
+#endif /* DISABLE_EDAC_SYSFS */
}
/* END OF sysfs data and methods */
#include "dcdbas.h"
#define DRIVER_NAME "dcdbas"
-#define DRIVER_VERSION "5.6.0-1"
+#define DRIVER_VERSION "5.6.0-2"
#define DRIVER_DESCRIPTION "Dell Systems Management Base Driver"
static struct platform_device *dcdbas_pdev;
*/
static void __exit dcdbas_exit(void)
{
- platform_device_unregister(dcdbas_pdev);
+ /*
+ * make sure functions that use dcdbas_pdev are called
+ * before platform_device_unregister
+ */
unregister_reboot_notifier(&dcdbas_reboot_nb);
smi_data_buf_free();
+ platform_device_unregister(dcdbas_pdev);
}
module_init(dcdbas_init);
PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728),
PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1),
PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
+ PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443),
PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),
if (i == ISO_CHANNELS) {
PRINT(KERN_ERR, ohci->host->id,
"No free channel found");
- return EAGAIN;
+ return -EAGAIN;
}
if (!(ohci->ISO_channel_usage & mask)) {
v.channel = i;
spin_lock_irq(target->scsi_host->host_lock);
+ if (target->state == SRP_TARGET_DEAD ||
+ target->state == SRP_TARGET_REMOVED) {
+ scmnd->result = DID_BAD_TARGET << 16;
+ goto out;
+ }
+
if (scmnd->host_scribble == (void *) -1L)
goto out;
module_param_named(resetafter, psmouse_resetafter, uint, 0644);
MODULE_PARM_DESC(resetafter, "Reset device after so many bad packets (0 = never).");
-static unsigned int psmouse_resync_time = 5;
+static unsigned int psmouse_resync_time;
module_param_named(resync_time, psmouse_resync_time, uint, 0644);
MODULE_PARM_DESC(resync_time, "How long can mouse stay idle before forcing resync (in seconds, 0 = never).");
{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B00B, PCI_ANY_ID, PCI_ANY_ID},
{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B00C, PCI_ANY_ID, PCI_ANY_ID},
{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B100, PCI_ANY_ID, PCI_ANY_ID},
+ {PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B700, PCI_ANY_ID, PCI_ANY_ID},
+ {PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B701, PCI_ANY_ID, PCI_ANY_ID},
{PCI_VENDOR_ID_ABOCOM, PCI_DEVICE_ID_ABOCOM_2BD1, PCI_ANY_ID, PCI_ANY_ID},
{PCI_VENDOR_ID_ASUSTEK, PCI_DEVICE_ID_ASUSTEK_0675, PCI_ANY_ID, PCI_ANY_ID},
{PCI_VENDOR_ID_BERKOM, PCI_DEVICE_ID_BERKOM_T_CONCEPT, PCI_ANY_ID, PCI_ANY_ID},
{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B00B, "Billion", "B00B"},
{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B00C, "Billion", "B00C"},
{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B100, "Seyeon", "B100"},
+ {PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B700, "Primux II S0", "B700"},
+ {PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B701, "Primux II S0 NT", "B701"},
{PCI_VENDOR_ID_ABOCOM, PCI_DEVICE_ID_ABOCOM_2BD1, "Abocom/Magitek", "2BD1"},
{PCI_VENDOR_ID_ASUSTEK, PCI_DEVICE_ID_ASUSTEK_0675, "Asuscom/Askey", "675"},
{PCI_VENDOR_ID_BERKOM, PCI_DEVICE_ID_BERKOM_T_CONCEPT, "German telekom", "T-Concept"},
/*
* hfc_usb.c
*
- * $Id: hfc_usb.c,v 4.36 2005/04/08 09:55:13 martinb1 Exp $
+ * $Id: hfc_usb.c,v 2.3.2.13 2006/02/17 17:17:22 mbachem Exp $
*
* modular HiSax ISDN driver for Colognechip HFC-S USB chip
*
#include "hfc_usb.h"
static const char *hfcusb_revision =
- "$Revision: 4.36 $ $Date: 2005/04/08 09:55:13 $ ";
+ "$Revision: 2.3.2.13 $ $Date: 2006/02/17 17:17:22 $ ";
/* Hisax debug support
* use "modprobe debug=x" where x is bitfield of USB_DBG & ISDN_DBG
for (i = 0; list[i].name != NULL; i++)
if (list[i].num == num)
return (list[i].name);
- return "<unkown ERROR>";
+ return "<unknown ERROR>";
}
hfc->ctrl_urb->transfer_buffer = NULL;
hfc->ctrl_urb->transfer_buffer_length = 0;
hfc->ctrl_write.wIndex =
- hfc->ctrl_buff[hfc->ctrl_out_idx].hfc_reg;
+ cpu_to_le16(hfc->ctrl_buff[hfc->ctrl_out_idx].hfc_reg);
hfc->ctrl_write.wValue =
- hfc->ctrl_buff[hfc->ctrl_out_idx].reg_val;
+ cpu_to_le16(hfc->ctrl_buff[hfc->ctrl_out_idx].reg_val);
usb_submit_urb(hfc->ctrl_urb, GFP_ATOMIC); /* start transfer */
}
/* init the background machinery for control requests */
hfc->ctrl_read.bRequestType = 0xc0;
hfc->ctrl_read.bRequest = 1;
- hfc->ctrl_read.wLength = 1;
+ hfc->ctrl_read.wLength = cpu_to_le16(1);
hfc->ctrl_write.bRequestType = 0x40;
hfc->ctrl_write.bRequest = 0;
hfc->ctrl_write.wLength = 0;
vend_idx = 0xffff;
for (i = 0; hfcusb_idtab[i].idVendor; i++) {
- if (dev->descriptor.idVendor == hfcusb_idtab[i].idVendor
- && dev->descriptor.idProduct ==
- hfcusb_idtab[i].idProduct) {
+ if ((le16_to_cpu(dev->descriptor.idVendor) == hfcusb_idtab[i].idVendor)
+ && (le16_to_cpu(dev->descriptor.idProduct) == hfcusb_idtab[i].idProduct)) {
vend_idx = i;
continue;
}
usb_transfer_mode
= USB_INT;
packet_size =
- ep->desc.
- wMaxPacketSize;
+ le16_to_cpu(ep->desc.wMaxPacketSize);
break;
case USB_ENDPOINT_XFER_BULK:
if (ep_addr & 0x80)
usb_transfer_mode
= USB_BULK;
packet_size =
- ep->desc.
- wMaxPacketSize;
+ le16_to_cpu(ep->desc.wMaxPacketSize);
break;
case USB_ENDPOINT_XFER_ISOC:
if (ep_addr & 0x80)
usb_transfer_mode
= USB_ISOC;
iso_packet_size =
- ep->desc.
- wMaxPacketSize;
+ le16_to_cpu(ep->desc.wMaxPacketSize);
break;
default:
context->
fifonum = cidx;
context->fifos[cidx].hfc =
context;
- context->fifos[cidx].
- usb_packet_maxlen =
- ep->desc.
- wMaxPacketSize;
+ context->fifos[cidx].usb_packet_maxlen =
+ le16_to_cpu(ep->desc.wMaxPacketSize);
context->fifos[cidx].
intervall =
ep->desc.bInterval;
#ifdef ISDN_DEBUG_MODEM_OPEN
printk(KERN_DEBUG "isdn_tty_close after info->count != 0\n");
#endif
+ module_put(info->owner);
return;
}
info->flags |= ISDN_ASYNC_CLOSING;
p += sprintf(p, "PMU driver version : %d\n", PMU_DRIVER_VERSION);
p += sprintf(p, "PMU firmware version : %02x\n", pmu_version);
p += sprintf(p, "AC Power : %d\n",
- ((pmu_power_flags & PMU_PWR_AC_PRESENT) != 0));
+ ((pmu_power_flags & PMU_PWR_AC_PRESENT) != 0) || pmu_battery_count == 0);
p += sprintf(p, "Battery count : %d\n", pmu_battery_count);
return p - page;
#include <linux/platform_device.h>
#include <linux/mutex.h>
+#include <asm/prom.h>
+
#include "windfarm.h"
#define VERSION "0.2"
{
DBG("wf: core loaded\n");
+ /* Don't register on old machines that use therm_pm72 for now */
+ if (machine_is_compatible("PowerMac7,2") ||
+ machine_is_compatible("PowerMac7,3") ||
+ machine_is_compatible("RackMac3,1"))
+ return -ENODEV;
platform_device_register(&wf_platform_device);
return 0;
}
#include <linux/wait.h>
#include <linux/cpufreq.h>
+#include <asm/prom.h>
+
#include "windfarm.h"
#define VERSION "0.3"
{
struct wf_control *clamp;
+ /* Don't register on old machines that use therm_pm72 for now */
+ if (machine_is_compatible("PowerMac7,2") ||
+ machine_is_compatible("PowerMac7,3") ||
+ machine_is_compatible("RackMac3,1"))
+ return -ENODEV;
+
clamp = kmalloc(sizeof(struct wf_control), GFP_KERNEL);
if (clamp == NULL)
return -ENOMEM;
#include "windfarm.h"
-#define VERSION "0.1"
+#define VERSION "0.2"
#undef DEBUG
const char *loc)
{
struct wf_lm75_sensor *lm;
+ int rc;
DBG("wf_lm75: creating %s device at address 0x%02x\n",
ds1775 ? "ds1775" : "lm75", addr);
lm->i2c.driver = &wf_lm75_driver;
strncpy(lm->i2c.name, lm->sens.name, I2C_NAME_SIZE-1);
- if (i2c_attach_client(&lm->i2c)) {
- printk(KERN_ERR "windfarm: failed to attach %s %s to i2c\n",
- ds1775 ? "ds1775" : "lm75", lm->i2c.name);
+ rc = i2c_attach_client(&lm->i2c);
+ if (rc) {
+ printk(KERN_ERR "windfarm: failed to attach %s %s to i2c,"
+ " err %d\n", ds1775 ? "ds1775" : "lm75",
+ lm->i2c.name, rc);
goto fail;
}
(dev = of_get_next_child(busnode, dev)) != NULL;) {
const char *loc =
get_property(dev, "hwsensor-location", NULL);
- u32 *reg = (u32 *)get_property(dev, "reg", NULL);
- DBG(" dev: %s... (loc: %p, reg: %p)\n", dev->name, loc, reg);
- if (loc == NULL || reg == NULL)
+ u8 addr;
+
+ /* We must re-match the adapter in order to properly check
+ * the channel on multibus setups
+ */
+ if (!pmac_i2c_match_adapter(dev, adapter))
+ continue;
+ addr = pmac_i2c_get_dev_addr(dev);
+ if (loc == NULL || addr == 0)
continue;
/* real lm75 */
if (device_is_compatible(dev, "lm75"))
- wf_lm75_create(adapter, *reg, 0, loc);
+ wf_lm75_create(adapter, addr, 0, loc);
/* ds1775 (compatible, better resolution */
else if (device_is_compatible(dev, "ds1775"))
- wf_lm75_create(adapter, *reg, 1, loc);
+ wf_lm75_create(adapter, addr, 1, loc);
}
return 0;
}
static int __init wf_lm75_sensor_init(void)
{
+ /* Don't register on old machines that use therm_pm72 for now */
+ if (machine_is_compatible("PowerMac7,2") ||
+ machine_is_compatible("PowerMac7,3") ||
+ machine_is_compatible("RackMac3,1"))
+ return -ENODEV;
return i2c_add_driver(&wf_lm75_driver);
}
#include "windfarm.h"
-#define VERSION "0.1"
+#define VERSION "0.2"
/* This currently only exports the external temperature sensor,
since that's all the control loops need. */
static void wf_max6690_create(struct i2c_adapter *adapter, u8 addr)
{
struct wf_6690_sensor *max;
- char *name = "u4-temp";
+ char *name = "backside-temp";
max = kzalloc(sizeof(struct wf_6690_sensor), GFP_KERNEL);
if (max == NULL) {
struct device_node *busnode, *dev = NULL;
struct pmac_i2c_bus *bus;
const char *loc;
- u32 *reg;
bus = pmac_i2c_adapter_to_bus(adapter);
if (bus == NULL)
busnode = pmac_i2c_get_bus_node(bus);
while ((dev = of_get_next_child(busnode, dev)) != NULL) {
+ u8 addr;
+
+ /* We must re-match the adapter in order to properly check
+ * the channel on multibus setups
+ */
+ if (!pmac_i2c_match_adapter(dev, adapter))
+ continue;
if (!device_is_compatible(dev, "max6690"))
continue;
+ addr = pmac_i2c_get_dev_addr(dev);
loc = get_property(dev, "hwsensor-location", NULL);
- reg = (u32 *) get_property(dev, "reg", NULL);
- if (!loc || !reg)
+ if (loc == NULL || addr == 0)
continue;
- printk("found max6690, loc=%s reg=%x\n", loc, *reg);
+ printk("found max6690, loc=%s addr=0x%02x\n", loc, addr);
if (strcmp(loc, "BACKSIDE"))
continue;
- wf_max6690_create(adapter, *reg);
+ wf_max6690_create(adapter, addr);
}
return 0;
static int __init wf_max6690_sensor_init(void)
{
+ /* Don't register on old machines that use therm_pm72 for now */
+ if (machine_is_compatible("PowerMac7,2") ||
+ machine_is_compatible("PowerMac7,3") ||
+ machine_is_compatible("RackMac3,1"))
+ return -ENODEV;
return i2c_add_driver(&wf_max6690_driver);
}
return st->target;
}
EXPORT_SYMBOL_GPL(wf_cpu_pid_run);
+
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("PID algorithm for PowerMacs thermal control");
+MODULE_LICENSE("GPL");
return;
if (!backside_tick) {
/* first time; initialize things */
+ printk(KERN_INFO "windfarm: Backside control loop started.\n");
backside_param.min = backside_fan->ops->get_min(backside_fan);
backside_param.max = backside_fan->ops->get_max(backside_fan);
wf_pid_init(&backside_pid, &backside_param);
return;
if (!drive_bay_tick) {
/* first time; initialize things */
+ printk(KERN_INFO "windfarm: Drive bay control loop started.\n");
drive_bay_prm.min = drive_bay_fan->ops->get_min(drive_bay_fan);
drive_bay_prm.max = drive_bay_fan->ops->get_max(drive_bay_fan);
wf_pid_init(&drive_bay_pid, &drive_bay_prm);
return;
if (!slots_started) {
/* first time; initialize things */
+ printk(KERN_INFO "windfarm: Slots control loop started.\n");
wf_pid_init(&slots_pid, &slots_param);
slots_started = 1;
}
if (!started) {
started = 1;
+ printk(KERN_INFO "windfarm: CPUs control loops started.\n");
for (i = 0; i < nr_cores; ++i) {
if (create_cpu_loop(i) < 0) {
failure_state = FAILURE_PERM;
{
unsigned int i;
- if (have_all_sensors)
- return;
if (!strncmp(sr->name, "cpu-temp-", 9)) {
i = sr->name[9] - '0';
if (sr->name[10] == 0 && i < NR_CORES &&
} else if (!strcmp(sr->name, "slots-power")) {
if (slots_power == NULL && wf_get_sensor(sr) == 0)
slots_power = sr;
- } else if (!strcmp(sr->name, "u4-temp")) {
+ } else if (!strcmp(sr->name, "backside-temp")) {
if (u4_temp == NULL && wf_get_sensor(sr) == 0)
u4_temp = sr;
} else
r1bio_t * r1_bio = (r1bio_t *)(bio->bi_private);
int mirror, behind = test_bit(R1BIO_BehindIO, &r1_bio->state);
conf_t *conf = mddev_to_conf(r1_bio->mddev);
+ struct bio *to_put = NULL;
if (bio->bi_size)
return 1;
* this branch is our 'one mirror IO has finished' event handler:
*/
r1_bio->bios[mirror] = NULL;
+ to_put = bio;
if (!uptodate) {
md_error(r1_bio->mddev, conf->mirrors[mirror].rdev);
/* an I/O failed, we can't clear the bitmap */
/* Don't dec_pending yet, we want to hold
* the reference over the retry
*/
- return 0;
+ goto out;
}
if (test_bit(R1BIO_BehindIO, &r1_bio->state)) {
/* free extra copy of the data pages */
raid_end_bio_io(r1_bio);
}
- if (r1_bio->bios[mirror]==NULL)
- bio_put(bio);
-
rdev_dec_pending(conf->mirrors[mirror].rdev, conf->mddev);
+ out:
+ if (to_put)
+ bio_put(to_put);
+
return 0;
}
atomic_set(&r1_bio->remaining, 0);
atomic_set(&r1_bio->behind_remaining, 0);
- do_barriers = bio->bi_rw & BIO_RW_BARRIER;
+ do_barriers = bio_barrier(bio);
if (do_barriers)
set_bit(R1BIO_Barrier, &r1_bio->state);
info("found the stv0297 at i2c address: 0x%02x",alps_tdee4_stv0297_config.demod_address);
} else
/* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
- if ((fc->fe = vp310_attach(&skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) {
+ if ((fc->fe = vp310_mt312_attach(&skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) {
ops = fc->fe->ops;
ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
EXPORT_SYMBOL(bt878_device_control);
-struct cards card_list[] __devinitdata = {
+static struct cards card_list[] __devinitdata = {
{ 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
{ 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" },
*/
-struct dst_types dst_tlist[] = {
+static struct dst_types dst_tlist[] = {
{
.device_id = "200103A",
.offset = 0,
/*--------------------------------------------------------------------------*/
/*
- * Flags OR'ed in the capabilites field of struct dmx_demux.
+ * Flags OR'ed in the capabilities field of struct dmx_demux.
*/
#define DMX_TS_FILTERING 1
.pll_set = dvb_usb_pll_set_i2c,
};
-static struct lgdt330x_config cxusb_lgdt330x_config = {
+static struct lgdt330x_config cxusb_lgdt3303_config = {
.demod_address = 0x0e,
.demod_chip = LGDT3303,
.pll_set = dvb_usb_pll_set_i2c,
return -EIO;
}
-static int cxusb_lgdt330x_frontend_attach(struct dvb_usb_device *d)
+static int cxusb_lgdt3303_frontend_attach(struct dvb_usb_device *d)
{
if (usb_set_interface(d->udev,0,7) < 0)
err("set interface failed");
cxusb_ctrl_msg(d,CMD_DIGITAL, NULL, 0, NULL, 0);
- if ((d->fe = lgdt330x_attach(&cxusb_lgdt330x_config, &d->i2c_adap)) != NULL)
+ if ((d->fe = lgdt330x_attach(&cxusb_lgdt3303_config, &d->i2c_adap)) != NULL)
return 0;
return -EIO;
.streaming_ctrl = cxusb_streaming_ctrl,
.power_ctrl = cxusb_power_ctrl,
- .frontend_attach = cxusb_lgdt330x_frontend_attach,
+ .frontend_attach = cxusb_lgdt3303_frontend_attach,
.tuner_attach = cxusb_lgh064f_tuner_attach,
.i2c_algo = &cxusb_i2c_algo,
d->state = DVB_USB_STATE_INIT;
-/* check the capabilites and set appropriate variables */
+/* check the capabilities and set appropriate variables */
/* speed - when running at FULL speed we need a HW PID filter */
if (d->udev->speed == USB_SPEED_FULL && !(d->props.caps & DVB_USB_HAS_PID_FILTER)) {
/**
* struct dvb_usb_properties - properties of a dvb-usb-device
- * @caps: capabilites of the DVB USB device.
+ * @caps: capabilities of the DVB USB device.
* @pid_filter_count: number of PID filter position in the optional hardware
* PID-filter.
*
A DVB-S tuner module. Say Y when you want to support this frontend.
config DVB_MT312
- tristate "Zarlink MT312 based"
+ tristate "Zarlink VP310/MT312 based"
depends on DVB_CORE
help
A DVB-S tuner module. Say Y when you want to support this frontend.
kfree(state);
}
-static struct dvb_frontend_ops vp310_mt312_ops;
-
-struct dvb_frontend* vp310_attach(const struct mt312_config* config,
- struct i2c_adapter* i2c)
-{
- struct mt312_state* state = NULL;
-
- /* allocate memory for the internal state */
- state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
- if (state == NULL)
- goto error;
-
- /* setup the state */
- state->config = config;
- state->i2c = i2c;
- memcpy(&state->ops, &vp310_mt312_ops, sizeof(struct dvb_frontend_ops));
- strcpy(state->ops.info.name, "Zarlink VP310 DVB-S");
-
- /* check if the demod is there */
- if (mt312_readreg(state, ID, &state->id) < 0)
- goto error;
- if (state->id != ID_VP310) {
- goto error;
- }
-
- /* create dvb_frontend */
- state->frequency = 90;
- state->frontend.ops = &state->ops;
- state->frontend.demodulator_priv = state;
- return &state->frontend;
-
-error:
- kfree(state);
- return NULL;
-}
-
-struct dvb_frontend* mt312_attach(const struct mt312_config* config,
- struct i2c_adapter* i2c)
-{
- struct mt312_state* state = NULL;
-
- /* allocate memory for the internal state */
- state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
- if (state == NULL)
- goto error;
-
- /* setup the state */
- state->config = config;
- state->i2c = i2c;
- memcpy(&state->ops, &vp310_mt312_ops, sizeof(struct dvb_frontend_ops));
- strcpy(state->ops.info.name, "Zarlink MT312 DVB-S");
-
- /* check if the demod is there */
- if (mt312_readreg(state, ID, &state->id) < 0)
- goto error;
- if (state->id != ID_MT312) {
- goto error;
- }
-
- /* create dvb_frontend */
- state->frequency = 60;
- state->frontend.ops = &state->ops;
- state->frontend.demodulator_priv = state;
- return &state->frontend;
-
-error:
- kfree(state);
- return NULL;
-}
-
static struct dvb_frontend_ops vp310_mt312_ops = {
.info = {
.set_voltage = mt312_set_voltage,
};
+struct dvb_frontend* vp310_mt312_attach(const struct mt312_config* config,
+ struct i2c_adapter* i2c)
+{
+ struct mt312_state* state = NULL;
+
+ /* allocate memory for the internal state */
+ state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
+ if (state == NULL)
+ goto error;
+
+ /* setup the state */
+ state->config = config;
+ state->i2c = i2c;
+ memcpy(&state->ops, &vp310_mt312_ops, sizeof(struct dvb_frontend_ops));
+
+ /* check if the demod is there */
+ if (mt312_readreg(state, ID, &state->id) < 0)
+ goto error;
+
+ switch (state->id) {
+ case ID_VP310:
+ strcpy(state->ops.info.name, "Zarlink VP310 DVB-S");
+ state->frequency = 90;
+ break;
+ case ID_MT312:
+ strcpy(state->ops.info.name, "Zarlink MT312 DVB-S");
+ state->frequency = 60;
+ break;
+ default:
+ printk (KERN_WARNING "Only Zarlink VP310/MT312 are supported chips.\n");
+ goto error;
+ }
+
+ /* create dvb_frontend */
+ state->frontend.ops = &state->ops;
+ state->frontend.demodulator_priv = state;
+ return &state->frontend;
+
+error:
+ kfree(state);
+ return NULL;
+}
+
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>");
MODULE_LICENSE("GPL");
-EXPORT_SYMBOL(mt312_attach);
-EXPORT_SYMBOL(vp310_attach);
+EXPORT_SYMBOL(vp310_mt312_attach);
int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params);
};
-extern struct dvb_frontend* mt312_attach(const struct mt312_config* config,
- struct i2c_adapter* i2c);
+struct dvb_frontend* vp310_mt312_attach(const struct mt312_config* config,
+ struct i2c_adapter* i2c);
-extern struct dvb_frontend* vp310_attach(const struct mt312_config* config,
- struct i2c_adapter* i2c);
#endif // MT312_H
break;
case QAM_128:
- delay = 150;
- sweeprate = 1000;
- break;
-
case QAM_256:
delay = 200;
sweeprate = 500;
len = ntohl(*(u32*) ptr);
ptr += 4;
if (len >= 512) {
- printk("dvb-ttpci: dpram file is way to big.\n");
+ printk("dvb-ttpci: dpram file is way too big.\n");
return -EINVAL;
}
if (crc != crc32_le(0, ptr, len)) {
* The same behaviour of missing VSYNC can be duplicated on budget
* cards, by seting DD1_INIT trigger mode 7 in 3rd nibble.
*/
-static int av7110_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_data *pci_ext)
+static int __devinit av7110_attach(struct saa7146_dev* dev,
+ struct saa7146_pci_extension_data *pci_ext)
{
const int length = TS_WIDTH * TS_HEIGHT;
struct pci_dev *pdev = dev->pci;
goto out;
}
-static int av7110_detach(struct saa7146_dev* saa)
+static int __devexit av7110_detach(struct saa7146_dev* saa)
{
struct av7110 *av7110 = saa->ext_priv;
dprintk(4, "%p\n", av7110);
.module = THIS_MODULE,
.pci_tbl = &pci_tbl[0],
.attach = av7110_attach,
- .detach = av7110_detach,
+ .detach = __devexit_p(av7110_detach),
.irq_mask = MASK_19 | MASK_03 | MASK_10,
.irq_func = av7110_irq,
/* test DEBI */
iwdebi(av7110, DEBISWAP, DPRAM_BASE, 0x76543210, 4);
+ /* FIXME: Why does Nexus CA require 2x iwdebi for first init? */
+ iwdebi(av7110, DEBISWAP, DPRAM_BASE, 0x76543210, 4);
+
if ((ret=irdebi(av7110, DEBINOSWAP, DPRAM_BASE, 0, 4)) != 0x10325476) {
printk(KERN_ERR "dvb-ttpci: debi test in av7110_bootarm() failed: "
"%08x != %08x (check your BIOS 'Plug&Play OS' settings)\n",
}
-int __init av7110_ir_init(struct av7110 *av7110)
+int __devinit av7110_ir_init(struct av7110 *av7110)
{
static struct proc_dir_entry *e;
}
-void __exit av7110_ir_exit(struct av7110 *av7110)
+void __devexit av7110_ir_exit(struct av7110 *av7110)
{
int i;
//DBG("cpia_ioctl: %u\n", ioctlnr);
switch (ioctlnr) {
- /* query capabilites */
+ /* query capabilities */
case VIDIOCGCAP:
{
struct video_capability *b = arg;
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Contrast",
.minimum = 0,
- .maximum = 255,
+ .maximum = 127,
.step = 1,
.default_value = 64,
.flags = 0,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Saturation",
.minimum = 0,
- .maximum = 255,
+ .maximum = 127,
.step = 1,
.default_value = 64,
.flags = 0,
/*
mxb - v4l2 driver for the Multimedia eXtension Board
- Copyright (C) 1998-2003 Michael Hunold <michael@mihu.de>
+ Copyright (C) 1998-2006 Michael Hunold <michael@mihu.de>
Visit http://www.mihu.de/linux/saa7146/mxb/
for further details about this card.
struct video_decoder_init init;
struct i2c_msg msg;
struct tuner_setup tun_setup;
+ v4l2_std_id std = V4L2_STD_PAL_BG;
int i = 0, err = 0;
struct tea6415c_multiplex vm;
mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_FREQUENCY,
&mxb->cur_freq);
+ /* set a default video standard */
+ mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_STD, &std);
+
/* mute audio on tea6420s */
mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_line[6][0]);
mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_line[6][1]);
int one = 1;
if(V4L2_STD_PAL_I == std->id ) {
+ v4l2_std_id std = V4L2_STD_PAL_I;
DEB_D(("VIDIOC_S_STD: setting mxb for PAL_I.\n"));
/* set the 7146 gpio register -- I don't know what this does exactly */
saa7146_write(dev, GPIO_CTRL, 0x00404050);
/* unset the 7111 gpio register -- I don't know what this does exactly */
mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_GPIO, &zero);
+ mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_STD, &std);
} else {
+ v4l2_std_id std = V4L2_STD_PAL_BG;
DEB_D(("VIDIOC_S_STD: setting mxb for PAL/NTSC/SECAM.\n"));
/* set the 7146 gpio register -- I don't know what this does exactly */
saa7146_write(dev, GPIO_CTRL, 0x00404050);
/* set the 7111 gpio register -- I don't know what this does exactly */
mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_GPIO, &one);
+ mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_STD, &std);
}
return 0;
}
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Contrast",
.minimum = 0,
- .maximum = 255,
+ .maximum = 127,
.step = 1,
.default_value = 64,
.flags = 0,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Saturation",
.minimum = 0,
- .maximum = 255,
+ .maximum = 127,
.step = 1,
.default_value = 64,
.flags = 0,
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
-static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 0};
+static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 1};
module_param_array(index, int, NULL, 0444);
+module_param_array(enable, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for SAA7134 capture interface(s).");
+MODULE_PARM_DESC(enable, "Enable (or not) the SAA7134 capture interface(s).");
#define dprintk(fmt, arg...) if (debug) \
printk(KERN_DEBUG "%s/alsa: " fmt, dev->name , ##arg)
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
- .tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_ACTIVE,
+ .tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_INACTIVE,
.inputs = {{
.name = name_tv,
.vmux = 3,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
- .tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_ACTIVE,
+ .tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_INACTIVE,
.mpeg = SAA7134_MPEG_DVB,
.inputs = {{
.name = name_tv,
.radio_type = UNSET,
.tuner_addr = 0x61,
.radio_addr = ADDR_UNSET,
- .tda9887_conf = TDA9887_PRESENT,
+ .tda9887_conf = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE,
.mpeg = SAA7134_MPEG_DVB,
.inputs = {{
.name = name_tv,
.radio_type = UNSET,
.tuner_addr = 0x61,
.radio_addr = ADDR_UNSET,
- .tda9887_conf = TDA9887_PRESENT,
+ .tda9887_conf = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE,
.mpeg = SAA7134_MPEG_DVB,
.inputs = {{
.name = name_tv,
}},
},
[SAA7134_BOARD_PINNACLE_PCTV_110i] = {
- .name = "Pinnacle PCTV 110i (saa7133)",
+ .name = "Pinnacle PCTV 40i/50i/110i (saa7133)",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_TDA8290,
.radio_type = UNSET,
},{
.name = name_comp1,
.vmux = 1,
+ .amux = LINE2,
+ },{
+ .name = name_comp2,
+ .vmux = 0,
.amux = LINE2,
},{
.name = name_svideo,
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7130,
.subvendor = 0x1048,
- .subdevice = 0x226b,
+ .subdevice = 0x226a,
.driver_data = SAA7134_BOARD_ELSA_500TV,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
/* power-up tuner chip */
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x00040000, 0x00040000);
saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00040000, 0x00000000);
+ case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
+ /* this turns the remote control chip off to work around a bug in it */
+ saa_writeb(SAA7134_GPIO_GPMODE1, 0x80);
+ saa_writeb(SAA7134_GPIO_GPSTATUS1, 0x80);
+ break;
case SAA7134_BOARD_MONSTERTV_MOBILE:
/* power-up tuner chip */
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x00040000, 0x00040000);
mt352_write(fe, fsm_ctl_cfg, sizeof(fsm_ctl_cfg));
mt352_write(fe, scan_ctl_cfg, sizeof(scan_ctl_cfg));
mt352_write(fe, irq_cfg, sizeof(irq_cfg));
+
return 0;
}
struct dvb_frontend_parameters* params,
u8* pllbuf)
{
- static int on = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE;
- static int off = TDA9887_PRESENT | TDA9887_PORT2_ACTIVE;
+ u8 off[] = { 0x00, 0xf1};
+ u8 on[] = { 0x00, 0x71};
+ struct i2c_msg msg = {.addr=0x43, .flags=0, .buf=off, .len = sizeof(off)};
+
struct saa7134_dev *dev = fe->dvb->priv;
struct v4l2_frequency f;
f.tuner = 0;
f.type = V4L2_TUNER_DIGITAL_TV;
f.frequency = params->frequency / 1000 * 16 / 1000;
- saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&on);
+ i2c_transfer(&dev->i2c_adap, &msg, 1);
saa7134_i2c_call_clients(dev,VIDIOC_S_FREQUENCY,&f);
- saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&off);
+ msg.buf = on;
+ i2c_transfer(&dev->i2c_adap, &msg, 1);
pinnacle_antenna_pwr(dev, antenna_pwr);
int tda8290_probe(struct i2c_client *c)
{
- unsigned char soft_reset[] = { 0x00, 0x00 };
- unsigned char easy_mode_b[] = { 0x01, 0x02 };
- unsigned char easy_mode_g[] = { 0x01, 0x04 };
+ unsigned char soft_reset[] = { 0x00, 0x00 };
+ unsigned char easy_mode_b[] = { 0x01, 0x02 };
+ unsigned char easy_mode_g[] = { 0x01, 0x04 };
+ unsigned char restore_9886[] = { 0x00, 0xd6, 0x30 };
unsigned char addr_dto_lsb = 0x07;
unsigned char data;
return 0;
}
}
+ i2c_master_send(c, restore_9886, 3);
return -1;
}
struct v4l2_frequency *f = arg;
switch_v4l2();
- if (V4L2_TUNER_RADIO == f->type &&
- V4L2_TUNER_RADIO != t->mode) {
+ if ((V4L2_TUNER_RADIO == f->type && V4L2_TUNER_RADIO != t->mode)
+ || (V4L2_TUNER_DIGITAL_TV == f->type
+ && V4L2_TUNER_DIGITAL_TV != t->mode)) {
if (set_mode (client, t, f->type, "VIDIOC_S_FREQUENCY")
== EINVAL)
return 0;
the slave is bound to it). Otherwise it doesn't need this functions and
therfor they may not be initialized.
- The other fuctions are just for convenience, as they are for shure used by
+ The other fuctions are just for convenience, as they are for sure used by
most/all of the codecs. The last ones may be ommited, too.
See the structure declaration below for more information and which data has
while (!(zr36050_read_status1(ptr) & 0x4)) {
udelay(1);
- if (i++ > 200000) { // 200ms, there is for shure something wrong!!!
+ if (i++ > 200000) { // 200ms, there is for sure something wrong!!!
dprintk(1,
"%s: timout at wait_end (last status: 0x%02x)\n",
ptr->name, ptr->status1);
while (zr36060_read_status(ptr) & ZR060_CFSR_Busy) {
udelay(1);
- if (i++ > 200000) { // 200ms, there is for shure something wrong!!!
+ if (i++ > 200000) { // 200ms, there is for sure something wrong!!!
dprintk(1,
"%s: timout at wait_end (last status: 0x%02x)\n",
ptr->name, ptr->status);
case I2C_DRIVERID_VIDEODECODER:
DEBUG(printk(CARD_INFO "decoder attached\n",CARD));
- /* fetch the capabilites of the decoder */
+ /* fetch the capabilities of the decoder */
rv = i2c_control_device(&ztv->i2c, I2C_DRIVERID_VIDEODECODER, DECODER_GET_CAPABILITIES, &dc);
if (rv) {
DEBUG(printk(CARD_DEBUG "decoder is not V4L aware!\n",CARD));
static inline void command_put(struct command *cmd)
{
unsigned long flags;
+ spinlock_t *lock = cmd->lock;
- spin_lock_irqsave(cmd->lock, flags);
- kobject_put(&cmd->kobj);
- spin_unlock_irqrestore(cmd->lock, flags);
+ spin_lock_irqsave(lock, flags);
+ kobject_put(&cmd->kobj);
+ spin_unlock_irqrestore(lock, flags);
}
static inline void command_get(struct command *cmd)
{
- kobject_get(&cmd->kobj);
+ kobject_get(&cmd->kobj);
}
#include <linux/config.h>
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
u32 mmccmd = (cmd->opcode << SD_CMD_CI_SHIFT);
- switch (mmc_rsp_type(cmd->flags)) {
+ switch (mmc_resp_type(cmd)) {
case MMC_RSP_R1:
mmccmd |= SD_CMD_RT_1;
break;
static void au1xmmc_dma_callback(int irq, void *dev_id, struct pt_regs *regs)
{
struct au1xmmc_host *host = (struct au1xmmc_host *) dev_id;
- u32 status;
/* Avoid spurious interrupts */
.set_ios = au1xmmc_set_ios,
};
-static int au1xmmc_probe(struct device *dev)
+static int __devinit au1xmmc_probe(struct platform_device *pdev)
{
int i, ret = 0;
disable_irq(AU1100_SD_IRQ);
for(i = 0; i < AU1XMMC_CONTROLLER_COUNT; i++) {
- struct mmc_host *mmc = mmc_alloc_host(sizeof(struct au1xmmc_host), dev);
+ struct mmc_host *mmc = mmc_alloc_host(sizeof(struct au1xmmc_host), &pdev->dev);
struct au1xmmc_host *host = 0;
if (!mmc) {
return 0;
}
-static int au1xmmc_remove(struct device *dev)
+static int __devexit au1xmmc_remove(struct platform_device *pdev)
{
int i;
return 0;
}
-static struct device_driver au1xmmc_driver = {
- .name = DRIVER_NAME,
- .bus = &platform_bus_type,
+static struct platform_driver au1xmmc_driver = {
.probe = au1xmmc_probe,
.remove = au1xmmc_remove,
.suspend = NULL,
- .resume = NULL
+ .resume = NULL,
+ .driver = {
+ .name = DRIVER_NAME,
+ },
};
static int __init au1xmmc_init(void)
{
- return driver_register(&au1xmmc_driver);
+ return platform_driver_register(&au1xmmc_driver);
}
static void __exit au1xmmc_exit(void)
{
- driver_unregister(&au1xmmc_driver);
+ platform_driver_unregister(&au1xmmc_driver);
}
module_init(au1xmmc_init);
* we're at a block boundary and need to erase the whole block.
*/
pageaddr = instr->addr / priv->page_size;
- do_block = (pageaddr & 0x7) == 0 && instr->len <= blocksize;
+ do_block = (pageaddr & 0x7) == 0 && instr->len >= blocksize;
pageaddr = pageaddr << priv->page_offset;
command[0] = do_block ? OP_ERASE_BLOCK : OP_ERASE_PAGE;
/*
- * $Id: redboot.c,v 1.18 2005/11/07 11:14:21 gleixner Exp $
+ * $Id: redboot.c,v 1.19 2005/12/01 10:03:51 dwmw2 Exp $
*
* Parse RedBoot-style Flash Image System (FIS) tables and
* produce a Linux partition array to match.
i = numslots;
break;
}
- if (!memcmp(buf[i].name, "FIS directory", 14))
+ if (!memcmp(buf[i].name, "FIS directory", 14)) {
+ /* This is apparently the FIS directory entry for the
+ * FIS directory itself. The FIS directory size is
+ * one erase block; if the buf[i].size field is
+ * swab32(erasesize) then we know we are looking at
+ * a byte swapped FIS directory - swap all the entries!
+ * (NOTE: this is 'size' not 'data_length'; size is
+ * the full size of the entry.)
+ */
+ if (swab32(buf[i].size) == master->erasesize) {
+ int j;
+ for (j = 0; j < numslots && buf[j].name[0] != 0xff; ++j) {
+ /* The unsigned long fields were written with the
+ * wrong byte sex, name and pad have no byte sex.
+ */
+ swab32s(&buf[j].flash_base);
+ swab32s(&buf[j].mem_base);
+ swab32s(&buf[j].size);
+ swab32s(&buf[j].entry_point);
+ swab32s(&buf[j].data_length);
+ swab32s(&buf[j].desc_cksum);
+ swab32s(&buf[j].file_cksum);
+ }
+ }
break;
+ }
}
if (i == numslots) {
/* Didn't find it */
static int __init el3_init_module(void)
{
+ int ret = 0;
el3_cards = 0;
if (debug >= 0)
}
#ifdef CONFIG_EISA
- if (eisa_driver_register (&el3_eisa_driver) < 0) {
- eisa_driver_unregister (&el3_eisa_driver);
- }
+ ret = eisa_driver_register(&el3_eisa_driver);
#endif
#ifdef CONFIG_MCA
- mca_register_driver(&el3_mca_driver);
+ {
+ int err = mca_register_driver(&el3_mca_driver);
+ if (ret == 0)
+ ret = err;
+ }
#endif
- return 0;
+ return ret;
}
static void __exit el3_cleanup_module(void)
return -ENOMEM;
}
+static void cp_init_rings_index (struct cp_private *cp)
+{
+ cp->rx_tail = 0;
+ cp->tx_head = cp->tx_tail = 0;
+}
+
static int cp_init_rings (struct cp_private *cp)
{
memset(cp->tx_ring, 0, sizeof(struct cp_desc) * CP_TX_RING_SIZE);
cp->tx_ring[CP_TX_RING_SIZE - 1].opts1 = cpu_to_le32(RingEnd);
- cp->rx_tail = 0;
- cp->tx_head = cp->tx_tail = 0;
+ cp_init_rings_index(cp);
return cp_refill_rx (cp);
}
spin_unlock_irqrestore (&cp->lock, flags);
- if (cp->pdev && cp->wol_enabled) {
- pci_save_state (cp->pdev);
- cp_set_d3_state (cp);
- }
+ pci_save_state(pdev);
+ pci_enable_wake(pdev, pci_choose_state(pdev, state), cp->wol_enabled);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
return 0;
}
static int cp_resume (struct pci_dev *pdev)
{
- struct net_device *dev;
- struct cp_private *cp;
+ struct net_device *dev = pci_get_drvdata (pdev);
+ struct cp_private *cp = netdev_priv(dev);
unsigned long flags;
- dev = pci_get_drvdata (pdev);
- cp = netdev_priv(dev);
+ if (!netif_running(dev))
+ return 0;
netif_device_attach (dev);
-
- if (cp->pdev && cp->wol_enabled) {
- pci_set_power_state (cp->pdev, PCI_D0);
- pci_restore_state (cp->pdev);
- }
-
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ pci_enable_wake(pdev, PCI_D0, 0);
+
+ /* FIXME: sh*t may happen if the Rx ring buffer is depleted */
+ cp_init_rings_index (cp);
cp_init_hw (cp);
netif_start_queue (dev);
without a specific driver are compatible with NE2000.
If you have a PCI NE2000 card however, say N here and Y to "PCI
- NE2000 support", above. If you have a NE2000 card and are running on
+ NE2000 and clone support" under "EISA, VLB, PCI and on board
+ controllers" below. If you have a NE2000 card and are running on
an MCA system (a bus system used on some IBM PS/2 computers and
laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
below.
struct peespi *t1_espi_create(adapter_t *adapter)
{
- struct peespi *espi = kmalloc(sizeof(*espi), GFP_KERNEL);
-
- memset(espi, 0, sizeof(*espi));
+ struct peespi *espi = kzalloc(sizeof(*espi), GFP_KERNEL);
if (espi)
espi->adapter = adapter;
#ifdef MODULE
static struct net_device *de620_dev;
-int init_module(void)
+int __init init_module(void)
{
de620_dev = de620_probe(-1);
if (IS_ERR(de620_dev))
*/
#define DRV_NAME "D-Link DL2000-based linux driver"
-#define DRV_VERSION "v1.17a"
-#define DRV_RELDATE "2002/10/04"
+#define DRV_VERSION "v1.17b"
+#define DRV_RELDATE "2006/03/10"
#include "dl2k.h"
static char version[] __devinitdata =
break;
skb = np->tx_skbuff[entry];
pci_unmap_single (np->pdev,
- np->tx_ring[entry].fraginfo,
+ np->tx_ring[entry].fraginfo & 0xffffffffffff,
skb->len, PCI_DMA_TODEVICE);
if (irq)
dev_kfree_skb_irq (skb);
/* Small skbuffs for short packets */
if (pkt_len > copy_thresh) {
- pci_unmap_single (np->pdev, desc->fraginfo,
+ pci_unmap_single (np->pdev,
+ desc->fraginfo & 0xffffffffffff,
np->rx_buf_sz,
PCI_DMA_FROMDEVICE);
skb_put (skb = np->rx_skbuff[entry], pkt_len);
np->rx_skbuff[entry] = NULL;
} else if ((skb = dev_alloc_skb (pkt_len + 2)) != NULL) {
pci_dma_sync_single_for_cpu(np->pdev,
- desc->fraginfo,
+ desc->fraginfo &
+ 0xffffffffffff,
np->rx_buf_sz,
PCI_DMA_FROMDEVICE);
skb->dev = dev;
pkt_len, 0);
skb_put (skb, pkt_len);
pci_dma_sync_single_for_device(np->pdev,
- desc->fraginfo,
+ desc->fraginfo &
+ 0xffffffffffff,
np->rx_buf_sz,
PCI_DMA_FROMDEVICE);
}
np->rx_ring[i].fraginfo = 0;
skb = np->rx_skbuff[i];
if (skb) {
- pci_unmap_single (np->pdev, np->rx_ring[i].fraginfo,
- skb->len, PCI_DMA_FROMDEVICE);
+ pci_unmap_single(np->pdev,
+ np->rx_ring[i].fraginfo & 0xffffffffffff,
+ skb->len, PCI_DMA_FROMDEVICE);
dev_kfree_skb (skb);
np->rx_skbuff[i] = NULL;
}
for (i = 0; i < TX_RING_SIZE; i++) {
skb = np->tx_skbuff[i];
if (skb) {
- pci_unmap_single (np->pdev, np->tx_ring[i].fraginfo,
- skb->len, PCI_DMA_TODEVICE);
+ pci_unmap_single(np->pdev,
+ np->tx_ring[i].fraginfo & 0xffffffffffff,
+ skb->len, PCI_DMA_TODEVICE);
dev_kfree_skb (skb);
np->tx_skbuff[i] = NULL;
}
struct e1000_ps_page *ps_page;
struct e1000_ps_page_dma *ps_page_dma;
- struct sk_buff *rx_skb_top;
- struct sk_buff *rx_skb_prev;
-
/* cpu for rx queue */
int cpu;
#else
#define DRIVERNAPI "-NAPI"
#endif
-#define DRV_VERSION "6.3.9-k2"DRIVERNAPI
+#define DRV_VERSION "6.3.9-k4"DRIVERNAPI
char e1000_driver_version[] = DRV_VERSION;
static char e1000_copyright[] = "Copyright (c) 1999-2005 Intel Corporation.";
rxdr->next_to_clean = 0;
rxdr->next_to_use = 0;
- rxdr->rx_skb_top = NULL;
- rxdr->rx_skb_prev = NULL;
return 0;
}
rctl |= adapter->rx_buffer_len << 0x11;
} else {
rctl &= ~E1000_RCTL_SZ_4096;
- rctl &= ~E1000_RCTL_BSEX;
- rctl |= E1000_RCTL_SZ_2048;
+ rctl |= E1000_RCTL_BSEX;
+ switch (adapter->rx_buffer_len) {
+ case E1000_RXBUFFER_2048:
+ default:
+ rctl |= E1000_RCTL_SZ_2048;
+ rctl &= ~E1000_RCTL_BSEX;
+ break;
+ case E1000_RXBUFFER_4096:
+ rctl |= E1000_RCTL_SZ_4096;
+ break;
+ case E1000_RXBUFFER_8192:
+ rctl |= E1000_RCTL_SZ_8192;
+ break;
+ case E1000_RXBUFFER_16384:
+ rctl |= E1000_RCTL_SZ_16384;
+ break;
+ }
}
#ifndef CONFIG_E1000_DISABLE_PACKET_SPLIT
}
}
- /* there also may be some cached data in our adapter */
- if (rx_ring->rx_skb_top) {
- dev_kfree_skb(rx_ring->rx_skb_top);
-
- /* rx_skb_prev will be wiped out by rx_skb_top */
- rx_ring->rx_skb_top = NULL;
- rx_ring->rx_skb_prev = NULL;
- }
-
-
size = sizeof(struct e1000_buffer) * rx_ring->count;
memset(rx_ring->buffer_info, 0, size);
size = sizeof(struct e1000_ps_page) * rx_ring->count;
if (!__pskb_pull_tail(skb, pull_size)) {
printk(KERN_ERR "__pskb_pull_tail failed.\n");
dev_kfree_skb_any(skb);
- return -EFAULT;
+ return NETDEV_TX_OK;
}
len = skb->len - skb->data_len;
}
break;
}
- /* since the driver code now supports splitting a packet across
- * multiple descriptors, most of the fifo related limitations on
- * jumbo frame traffic have gone away.
- * simply use 2k descriptors for everything.
- *
- * NOTE: dev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
- * means we reserve 2 more, this pushes us to allocate from the next
- * larger slab size
- * i.e. RXBUFFER_2048 --> size-4096 slab */
-
- /* recent hardware supports 1KB granularity */
+
if (adapter->hw.mac_type > e1000_82547_rev_2) {
- adapter->rx_buffer_len =
- ((max_frame < E1000_RXBUFFER_2048) ?
- max_frame : E1000_RXBUFFER_2048);
+ adapter->rx_buffer_len = max_frame;
E1000_ROUNDUP(adapter->rx_buffer_len, 1024);
- } else
- adapter->rx_buffer_len = E1000_RXBUFFER_2048;
+ } else {
+ if(unlikely((adapter->hw.mac_type < e1000_82543) &&
+ (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE))) {
+ DPRINTK(PROBE, ERR, "Jumbo Frames not supported "
+ "on 82542\n");
+ return -EINVAL;
+ } else {
+ if(max_frame <= E1000_RXBUFFER_2048)
+ adapter->rx_buffer_len = E1000_RXBUFFER_2048;
+ else if(max_frame <= E1000_RXBUFFER_4096)
+ adapter->rx_buffer_len = E1000_RXBUFFER_4096;
+ else if(max_frame <= E1000_RXBUFFER_8192)
+ adapter->rx_buffer_len = E1000_RXBUFFER_8192;
+ else if(max_frame <= E1000_RXBUFFER_16384)
+ adapter->rx_buffer_len = E1000_RXBUFFER_16384;
+ }
+ }
netdev->mtu = new_mtu;
uint8_t last_byte;
unsigned int i;
int cleaned_count = 0;
- boolean_t cleaned = FALSE, multi_descriptor = FALSE;
+ boolean_t cleaned = FALSE;
i = rx_ring->next_to_clean;
rx_desc = E1000_RX_DESC(*rx_ring, i);
length = le16_to_cpu(rx_desc->length);
- skb_put(skb, length);
-
- if (!(status & E1000_RXD_STAT_EOP)) {
- if (!rx_ring->rx_skb_top) {
- rx_ring->rx_skb_top = skb;
- rx_ring->rx_skb_top->len = length;
- rx_ring->rx_skb_prev = skb;
- } else {
- if (skb_shinfo(rx_ring->rx_skb_top)->frag_list) {
- rx_ring->rx_skb_prev->next = skb;
- skb->prev = rx_ring->rx_skb_prev;
- } else {
- skb_shinfo(rx_ring->rx_skb_top)->frag_list = skb;
- }
- rx_ring->rx_skb_prev = skb;
- rx_ring->rx_skb_top->data_len += length;
- }
+ if (unlikely(!(status & E1000_RXD_STAT_EOP))) {
+ /* All receives must fit into a single buffer */
+ E1000_DBG("%s: Receive packet consumed multiple"
+ " buffers\n", netdev->name);
+ dev_kfree_skb_irq(skb);
goto next_desc;
- } else {
- if (rx_ring->rx_skb_top) {
- if (skb_shinfo(rx_ring->rx_skb_top)
- ->frag_list) {
- rx_ring->rx_skb_prev->next = skb;
- skb->prev = rx_ring->rx_skb_prev;
- } else
- skb_shinfo(rx_ring->rx_skb_top)
- ->frag_list = skb;
-
- rx_ring->rx_skb_top->data_len += length;
- rx_ring->rx_skb_top->len +=
- rx_ring->rx_skb_top->data_len;
-
- skb = rx_ring->rx_skb_top;
- multi_descriptor = TRUE;
- rx_ring->rx_skb_top = NULL;
- rx_ring->rx_skb_prev = NULL;
- }
}
if (unlikely(rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK)) {
* performance for small packets with large amounts
* of reassembly being done in the stack */
#define E1000_CB_LENGTH 256
- if ((length < E1000_CB_LENGTH) &&
- !rx_ring->rx_skb_top &&
- /* or maybe (status & E1000_RXD_STAT_EOP) && */
- !multi_descriptor) {
+ if (length < E1000_CB_LENGTH) {
struct sk_buff *new_skb =
dev_alloc_skb(length + NET_IP_ALIGN);
if (new_skb) {
skb = new_skb;
skb_put(skb, length);
}
- }
+ } else
+ skb_put(skb, length);
/* end copybreak code */
PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0309),
PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1106),
PCMCIA_DEVICE_MANF_CARD(0x8a01, 0xc1ab),
+ PCMCIA_DEVICE_PROD_ID12("AmbiCom,Inc.", "Fast Ethernet PC Card(AMB8110)", 0x49b020a7, 0x119cc9fc),
PCMCIA_DEVICE_PROD_ID124("Fast Ethernet", "16-bit PC Card", "AX88190", 0xb4be14e3, 0x9a12eb6a, 0xab9be5ef),
PCMCIA_DEVICE_PROD_ID12("ASIX", "AX88190", 0x0959823b, 0xab9be5ef),
PCMCIA_DEVICE_PROD_ID12("Billionton", "LNA-100B", 0x552ab682, 0xbc3b87e1),
i++, mclist = mclist->next) {
memcpy(sp->usr_addrs[i].addr, mclist->dmi_addr,
ETH_ALEN);
+ mac_addr = 0;
for (j = 0; j < ETH_ALEN; j++) {
mac_addr |= mclist->dmi_addr[j];
mac_addr <<= 8;
printk("%2.2x.\n", net_dev->dev_addr[i]);
/* Detect Wake on Lan support */
- ret = inl(CFGPMC & PMESP);
+ ret = (inl(net_dev->base_addr + CFGPMC) & PMESP) >> 27;
if (netif_msg_probe(sis_priv) && (ret & PME_D3C) == 0)
printk(KERN_INFO "%s: Wake on LAN only available from suspend to RAM.", net_dev->name);
if (wol->wolopts == 0) {
pci_read_config_dword(sis_priv->pci_dev, CFGPMCSR, &cfgpmcsr);
- cfgpmcsr |= ~PME_EN;
+ cfgpmcsr &= ~PME_EN;
pci_write_config_dword(sis_priv->pci_dev, CFGPMCSR, cfgpmcsr);
outl(pmctrl_bits, pmctrl_addr);
if (netif_msg_wol(sis_priv))
#define TX_RING_SIZE 512
#define TX_DEF_PENDING (TX_RING_SIZE - 1)
#define TX_MIN_PENDING 64
-#define MAX_SKB_TX_LE (4 + 2*MAX_SKB_FRAGS)
+#define MAX_SKB_TX_LE (4 + (sizeof(dma_addr_t)/sizeof(u32))*MAX_SKB_FRAGS)
#define STATUS_RING_SIZE 2048 /* 2 ports * (TX + 2*RX) */
#define STATUS_LE_BYTES (STATUS_RING_SIZE*sizeof(struct sky2_status_le))
module_param(copybreak, int, 0);
MODULE_PARM_DESC(copybreak, "Receive copy threshold");
-static int disable_msi = 0;
-module_param(disable_msi, int, 0);
-MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
-
static const struct pci_device_id sky2_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) },
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) },
/* Configure Rx MAC FIFO */
sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR);
- sky2_write16(hw, SK_REG(port, RX_GMF_CTRL_T),
- GMF_RX_CTRL_DEF);
+ sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
+ GMF_OPER_ON | GMF_RX_F_FL_ON);
/* Flush Rx MAC FIFO on any flow control or error */
sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR);
sky2_rx_add(sky2, re->mapaddr);
}
+ /* Truncate oversize frames */
+ sky2_write16(hw, SK_REG(sky2->port, RX_GMF_TR_THR), sky2->rx_bufsize - 8);
+ sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON);
+
/* Tell chip about available buffers */
sky2_write16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX), sky2->rx_put);
sky2->rx_last_put = sky2_read16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX));
struct sky2_tx_le *le = NULL;
struct tx_ring_info *re;
unsigned i, len;
+ int avail;
dma_addr_t mapping;
u32 addr64;
u16 mss;
re->idx = sky2->tx_prod;
le->ctrl |= EOP;
+ avail = tx_avail(sky2);
+ if (mss != 0 || avail < TX_MIN_PENDING) {
+ le->ctrl |= FRC_STAT;
+ if (avail <= MAX_SKB_TX_LE)
+ netif_stop_queue(dev);
+ }
+
sky2_put_idx(hw, txqaddr[sky2->port], sky2->tx_prod,
&sky2->tx_last_put, TX_RING_SIZE);
- if (tx_avail(sky2) <= MAX_SKB_TX_LE)
- netif_stop_queue(dev);
-
out_unlock:
spin_unlock(&sky2->tx_lock);
#define roundup(x, y) ((((x)+((y)-1))/(y))*(y))
-/* Want receive buffer size to be multiple of 64 bits, and incl room for vlan */
+/* Want receive buffer size to be multiple of 64 bits
+ * and incl room for vlan and truncation
+ */
static inline unsigned sky2_buf_size(int mtu)
{
- return roundup(mtu + ETH_HLEN + 4, 8);
+ return roundup(mtu + ETH_HLEN + VLAN_HLEN, 8) + 8;
}
static int sky2_change_mtu(struct net_device *dev, int new_mtu)
if (!(status & GMR_FS_RX_OK))
goto resubmit;
- if ((status >> 16) != length || length > sky2->rx_bufsize)
+ if (length > sky2->netdev->mtu + ETH_HLEN)
goto oversize;
if (length < copybreak) {
dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
}
-/* Handle software interrupt used during MSI test */
-static irqreturn_t __devinit sky2_test_intr(int irq, void *dev_id,
- struct pt_regs *regs)
-{
- struct sky2_hw *hw = dev_id;
- u32 status = sky2_read32(hw, B0_Y2_SP_ISRC2);
-
- if (status == 0)
- return IRQ_NONE;
-
- if (status & Y2_IS_IRQ_SW) {
- sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
- hw->msi = 1;
- }
- sky2_write32(hw, B0_Y2_SP_ICR, 2);
-
- sky2_read32(hw, B0_IMSK);
- return IRQ_HANDLED;
-}
-
-/* Test interrupt path by forcing a a software IRQ */
-static int __devinit sky2_test_msi(struct sky2_hw *hw)
-{
- struct pci_dev *pdev = hw->pdev;
- int i, err;
-
- sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW);
-
- err = request_irq(pdev->irq, sky2_test_intr, SA_SHIRQ, DRV_NAME, hw);
- if (err) {
- printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
- pci_name(pdev), pdev->irq);
- return err;
- }
-
- sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ);
- wmb();
-
- for (i = 0; i < 10; i++) {
- barrier();
- if (hw->msi)
- goto found;
- mdelay(1);
- }
-
- err = -EOPNOTSUPP;
- sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
- found:
- sky2_write32(hw, B0_IMSK, 0);
-
- free_irq(pdev->irq, hw);
-
- return err;
-}
-
static int __devinit sky2_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
}
}
- if (!disable_msi && pci_enable_msi(pdev) == 0) {
- err = sky2_test_msi(hw);
- if (err == -EOPNOTSUPP) {
- /* MSI test failed, go back to INTx mode */
- printk(KERN_WARNING PFX "%s: No interrupt was generated using MSI, "
- "switching to INTx mode. Please report this failure to "
- "the PCI maintainer and include system chipset information.\n",
- pci_name(pdev));
- pci_disable_msi(pdev);
- }
- else if (err)
- goto err_out_unregister;
- }
-
- err = request_irq(pdev->irq, sky2_intr, SA_SHIRQ | SA_SAMPLE_RANDOM,
- DRV_NAME, hw);
+ err = request_irq(pdev->irq, sky2_intr, SA_SHIRQ, DRV_NAME, hw);
if (err) {
printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
pci_name(pdev), pdev->irq);
return 0;
err_out_unregister:
- if (hw->msi)
- pci_disable_msi(pdev);
if (dev1) {
unregister_netdev(dev1);
free_netdev(dev1);
sky2_read8(hw, B0_CTST);
free_irq(pdev->irq, hw);
- if (hw->msi)
- pci_disable_msi(pdev);
pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma);
pci_release_regions(pdev);
pci_disable_device(pdev);
u32 intr_mask;
int pm_cap;
- int msi;
u8 chip_id;
u8 chip_rev;
u8 copper;
(base + len + 8 < base));
}
+/* Test for DMA addresses > 40-bit */
+static inline int tg3_40bit_overflow_test(struct tg3 *tp, dma_addr_t mapping,
+ int len)
+{
+#if defined(CONFIG_HIGHMEM) && (BITS_PER_LONG == 64)
+ if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)
+ return (((u64) mapping + len) > DMA_40BIT_MASK);
+ return 0;
+#else
+ return 0;
+#endif
+}
+
static void tg3_set_txd(struct tg3 *, int, dma_addr_t, int, u32, u32);
-static int tigon3_4gb_hwbug_workaround(struct tg3 *tp, struct sk_buff *skb,
+/* Workaround 4GB and 40-bit hardware DMA bugs. */
+static int tigon3_dma_hwbug_workaround(struct tg3 *tp, struct sk_buff *skb,
u32 last_plus_one, u32 *start,
u32 base_flags, u32 mss)
{
if (tg3_4g_overflow_test(mapping, len))
would_hit_hwbug = 1;
+ if (tg3_40bit_overflow_test(tp, mapping, len))
+ would_hit_hwbug = 1;
+
if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
tg3_set_txd(tp, entry, mapping, len,
base_flags, (i == last)|(mss << 1));
/* If the workaround fails due to memory/mapping
* failure, silently drop this packet.
*/
- if (tigon3_4gb_hwbug_workaround(tp, skb, last_plus_one,
+ if (tigon3_dma_hwbug_workaround(tp, skb, last_plus_one,
&start, base_flags, mss))
goto out_unlock;
return 0;
if (venid == PCI_VENDOR_ID_SUN)
return 1;
+
+ /* TG3 chips onboard the SunBlade-2500 don't have the
+ * subsystem-vendor-id set to PCI_VENDOR_ID_SUN but they
+ * are distinguishable from non-Sun variants by being
+ * named "network" by the firmware. Non-Sun cards will
+ * show up as being named "ethernet".
+ */
+ if (!strcmp(pcp->prom_name, "network"))
+ return 1;
}
return 0;
}
strcat(str, "66MHz");
else if (clock_ctrl == 6)
strcat(str, "100MHz");
- else if (clock_ctrl == 7)
- strcat(str, "133MHz");
} else {
strcpy(str, "PCI:");
if (tp->tg3_flags & TG3_FLAG_PCI_HIGH_SPEED)
unsigned long tg3reg_base, tg3reg_len;
struct net_device *dev;
struct tg3 *tp;
- int i, err, pci_using_dac, pm_cap;
+ int i, err, pm_cap;
char str[40];
+ u64 dma_mask, persist_dma_mask;
if (tg3_version_printed++ == 0)
printk(KERN_INFO "%s", version);
goto err_out_free_res;
}
- /* Configure DMA attributes. */
- err = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
- if (!err) {
- pci_using_dac = 1;
- err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
- if (err < 0) {
- printk(KERN_ERR PFX "Unable to obtain 64 bit DMA "
- "for consistent allocations\n");
- goto err_out_free_res;
- }
- } else {
- err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
- if (err) {
- printk(KERN_ERR PFX "No usable DMA configuration, "
- "aborting.\n");
- goto err_out_free_res;
- }
- pci_using_dac = 0;
- }
-
tg3reg_base = pci_resource_start(pdev, 0);
tg3reg_len = pci_resource_len(pdev, 0);
SET_MODULE_OWNER(dev);
SET_NETDEV_DEV(dev, &pdev->dev);
- if (pci_using_dac)
- dev->features |= NETIF_F_HIGHDMA;
dev->features |= NETIF_F_LLTX;
#if TG3_VLAN_TAG_USED
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
goto err_out_iounmap;
}
+ /* 5714, 5715 and 5780 cannot support DMA addresses > 40-bit.
+ * On 64-bit systems with IOMMU, use 40-bit dma_mask.
+ * On 64-bit systems without IOMMU, use 64-bit dma_mask and
+ * do DMA address check in tg3_start_xmit().
+ */
+ if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) {
+ persist_dma_mask = dma_mask = DMA_40BIT_MASK;
+#ifdef CONFIG_HIGHMEM
+ dma_mask = DMA_64BIT_MASK;
+#endif
+ } else if (tp->tg3_flags2 & TG3_FLG2_IS_5788)
+ persist_dma_mask = dma_mask = DMA_32BIT_MASK;
+ else
+ persist_dma_mask = dma_mask = DMA_64BIT_MASK;
+
+ /* Configure DMA attributes. */
+ if (dma_mask > DMA_32BIT_MASK) {
+ err = pci_set_dma_mask(pdev, dma_mask);
+ if (!err) {
+ dev->features |= NETIF_F_HIGHDMA;
+ err = pci_set_consistent_dma_mask(pdev,
+ persist_dma_mask);
+ if (err < 0) {
+ printk(KERN_ERR PFX "Unable to obtain 64 bit "
+ "DMA for consistent allocations\n");
+ goto err_out_iounmap;
+ }
+ }
+ }
+ if (err || dma_mask == DMA_32BIT_MASK) {
+ err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ if (err) {
+ printk(KERN_ERR PFX "No usable DMA configuration, "
+ "aborting.\n");
+ goto err_out_iounmap;
+ }
+ }
+
tg3_init_bufmgr_config(tp);
#if TG3_TSO_SUPPORT != 0
} else
tp->tg3_flags &= ~TG3_FLAG_RX_CHECKSUMS;
- if (tp->tg3_flags2 & TG3_FLG2_IS_5788)
- dev->features &= ~NETIF_F_HIGHDMA;
-
/* flow control autonegotiation is default behavior */
tp->tg3_flags |= TG3_FLAG_PAUSE_AUTONEG;
{
struct de_private *de = dev->priv;
int rc;
- unsigned long flags;
if (netif_msg_ifup(de))
printk(KERN_DEBUG "%s: enabling interface\n", dev->name);
return rc;
}
- rc = de_init_hw(de);
- if (rc) {
- printk(KERN_ERR "%s: h/w init failure, err=%d\n",
- dev->name, rc);
- goto err_out_free;
- }
+ dw32(IntrMask, 0);
rc = request_irq(dev->irq, de_interrupt, SA_SHIRQ, dev->name, dev);
if (rc) {
printk(KERN_ERR "%s: IRQ %d request failure, err=%d\n",
dev->name, dev->irq, rc);
- goto err_out_hw;
+ goto err_out_free;
+ }
+
+ rc = de_init_hw(de);
+ if (rc) {
+ printk(KERN_ERR "%s: h/w init failure, err=%d\n",
+ dev->name, rc);
+ goto err_out_free_irq;
}
netif_start_queue(dev);
return 0;
-err_out_hw:
- spin_lock_irqsave(&de->lock, flags);
- de_stop_hw(de);
- spin_unlock_irqrestore(&de->lock, flags);
-
+err_out_free_irq:
+ free_irq(dev->irq, dev);
err_out_free:
de_free_rings(de);
return rc;
synchronize_irq(dev->irq);
de_clean_rings(de);
+ de_init_rings(de);
+
de_init_hw(de);
netif_wake_queue(dev);
if (align)
skb_reserve(skb, align);
- if (memcpy_fromiovec(skb_put(skb, len), iv, len))
+ if (memcpy_fromiovec(skb_put(skb, len), iv, len)) {
+ tun->stats.rx_dropped++;
+ kfree_skb(skb);
return -EFAULT;
+ }
skb->dev = tun->dev;
switch (tun->flags & TUN_TYPE_MASK) {
for (i = 0; i < vptr->options.numrx; i++) {
struct velocity_rd_info *rd_info = &(vptr->rd_info[i]);
+ struct rx_desc *rd = vptr->rd_ring + i;
+
+ memset(rd, 0, sizeof(*rd));
if (!rd_info->skb)
continue;
PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777),
PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000),
PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002),
- PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002),
PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002),
PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030b),
PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612),
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002),
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005),
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0010),
+ PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0x0156, 0x0002, "INTERSIL",
+ 0x74c5e40d),
+ PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0x0156, 0x0002, "Intersil",
+ 0x4b801a17),
PCMCIA_MFC_DEVICE_PROD_ID12(0, "SanDisk", "ConnectPlus",
0x7a954bd9, 0x74be00c6),
PCMCIA_DEVICE_PROD_ID1234(
{
struct parport_pc_pci *card;
struct parport_serial_private *priv = pci_get_drvdata (dev);
- int i = id->driver_data, n;
- int success = 0;
+ int n, success = 0;
priv->par = cards[id->driver_data];
card = &priv->par;
"hi" as an offset (see SYBA
def.) */
/* TODO: test if sharing interrupts works */
- printk (KERN_DEBUG "PCI parallel port detected: %04x:%04x, "
- "I/O at %#lx(%#lx)\n",
- parport_serial_pci_tbl[i].vendor,
- parport_serial_pci_tbl[i].device, io_lo, io_hi);
+ dev_dbg(&dev->dev, "PCI parallel port detected: I/O at "
+ "%#lx(%#lx)\n", io_lo, io_hi);
port = parport_pc_probe_port (io_lo, io_hi, PARPORT_IRQ_NONE,
PARPORT_DMA_NONE, dev);
if (port) {
if (card->postinit_hook)
card->postinit_hook (dev, card, !success);
- return success ? 0 : 1;
+ return 0;
}
static int __devinit parport_serial_pci_probe (struct pci_dev *dev,
kfree(p_dev);
}
+static void pcmcia_add_pseudo_device(struct pcmcia_socket *s)
+{
+ if (!s->pcmcia_state.device_add_pending) {
+ s->pcmcia_state.device_add_pending = 1;
+ schedule_work(&s->device_add);
+ }
+ return;
+}
static int pcmcia_device_probe(struct device * dev)
{
struct pcmcia_device *p_dev;
struct pcmcia_driver *p_drv;
+ struct pcmcia_device_id *did;
struct pcmcia_socket *s;
int ret = 0;
}
ret = p_drv->probe(p_dev);
+ if (ret)
+ goto put_module;
+
+ /* handle pseudo multifunction devices:
+ * there are at most two pseudo multifunction devices.
+ * if we're matching against the first, schedule a
+ * call which will then check whether there are two
+ * pseudo devices, and if not, add the second one.
+ */
+ did = (struct pcmcia_device_id *) p_dev->dev.driver_data;
+ if (did && (did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO) &&
+ (p_dev->socket->device_count == 1) && (p_dev->device_no == 0))
+ pcmcia_add_pseudo_device(p_dev->socket);
put_module:
if (ret)
s->pcmcia_state.device_add_pending = 0;
}
-static inline void pcmcia_add_pseudo_device(struct pcmcia_socket *s)
-{
- if (!s->pcmcia_state.device_add_pending) {
- s->pcmcia_state.device_add_pending = 1;
- schedule_work(&s->device_add);
- }
- return;
-}
-
static int pcmcia_requery(struct device *dev, void * _data)
{
struct pcmcia_device *p_dev = to_pcmcia_dev(dev);
}
if (did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO) {
- /* handle pseudo multifunction devices:
- * there are at most two pseudo multifunction devices.
- * if we're matching against the first, schedule a
- * call which will then check whether there are two
- * pseudo devices, and if not, add the second one.
- */
- if (dev->device_no == 0)
- pcmcia_add_pseudo_device(dev->socket);
-
if (dev->device_no != did->device_no)
return 0;
}
down_write(&dev->dev.bus->subsys.rwsem);
dev->card_link = clink;
dev->dev.driver = &drv->link.driver;
- if (drv->link.driver.probe) {
- if (drv->link.driver.probe(&dev->dev)) {
- dev->dev.driver = NULL;
- dev->card_link = NULL;
- up_write(&dev->dev.bus->subsys.rwsem);
- return NULL;
- }
+ if (pnp_bus_type.probe(&dev->dev)) {
+ dev->dev.driver = NULL;
+ dev->card_link = NULL;
+ up_write(&dev->dev.bus->subsys.rwsem);
+ return NULL;
}
device_bind_driver(&dev->dev);
up_write(&dev->dev.bus->subsys.rwsem);
* interrupt for this detection ccw uses the kernel event daemon to
* trigger the call to dasd_change_state. All this is done in the
* discipline code, see dasd_eckd.c.
- * After the analysis ccw is done (do_analysis returned 0 or error)
- * the block device is setup. Either a fake disk is added to allow
- * formatting or a proper device request queue is created.
+ * After the analysis ccw is done (do_analysis returned 0) the block
+ * device is setup.
+ * In case the analysis returns an error, the device setup is stopped
+ * (a fake disk was already added to allow formatting).
*/
static inline int
dasd_state_basic_to_ready(struct dasd_device * device)
rc = 0;
if (device->discipline->do_analysis != NULL)
rc = device->discipline->do_analysis(device);
- if (rc)
+ if (rc) {
+ if (rc != -EAGAIN)
+ device->state = DASD_STATE_UNFMT;
return rc;
+ }
+ /* make disk known with correct capacity */
dasd_setup_queue(device);
+ set_capacity(device->gdp, device->blocks << device->s2b_shift);
device->state = DASD_STATE_READY;
- if (dasd_scan_partitions(device) != 0)
+ rc = dasd_scan_partitions(device);
+ if (rc)
device->state = DASD_STATE_BASIC;
- return 0;
+ return rc;
}
/*
device->state = DASD_STATE_BASIC;
}
+/*
+ * Back to basic.
+ */
+static inline void
+dasd_state_unfmt_to_basic(struct dasd_device * device)
+{
+ device->state = DASD_STATE_BASIC;
+}
+
/*
* Make the device online and schedule the bottom half to start
* the requeueing of requests from the linux request queue to the
if (device->state == DASD_STATE_READY &&
device->target <= DASD_STATE_BASIC)
dasd_state_ready_to_basic(device);
-
- if (device->state == DASD_STATE_BASIC &&
+
+ if (device->state == DASD_STATE_UNFMT &&
+ device->target <= DASD_STATE_BASIC)
+ dasd_state_unfmt_to_basic(device);
+
+ if (device->state == DASD_STATE_BASIC &&
device->target <= DASD_STATE_KNOWN)
dasd_state_basic_to_known(device);
goto out;
}
- if (device->state < DASD_STATE_BASIC) {
+ if (device->state <= DASD_STATE_BASIC) {
DBF_DEV_EVENT(DBF_ERR, device, " %s",
" Cannot open unrecognized device");
rc = -ENODEV;
{
struct block_device *bdev;
- /* Make the disk known. */
- set_capacity(device->gdp, device->blocks << device->s2b_shift);
bdev = bdget_disk(device->gdp, 0);
if (!bdev || blkdev_get(bdev, FMODE_READ, 1) < 0)
return -ENODEV;
* new: the dasd_device structure is allocated.
* known: the discipline for the device is identified.
* basic: the device can do basic i/o.
- * accept: the device is analysed (format is known).
+ * unfmt: the device could not be analyzed (format is unknown).
* ready: partition detection is done and the device is can do block io.
* online: the device accepts requests from the block device queue.
*
#define DASD_STATE_NEW 0
#define DASD_STATE_KNOWN 1
#define DASD_STATE_BASIC 2
-#define DASD_STATE_READY 3
-#define DASD_STATE_ONLINE 4
+#define DASD_STATE_UNFMT 3
+#define DASD_STATE_READY 4
+#define DASD_STATE_ONLINE 5
#include <linux/module.h>
#include <linux/wait.h>
case DASD_STATE_BASIC:
seq_printf(m, "basic");
break;
+ case DASD_STATE_UNFMT:
+ seq_printf(m, "unformatted");
+ break;
case DASD_STATE_READY:
case DASD_STATE_ONLINE:
seq_printf(m, "active ");
goto out;
}
switch (sda_area->response.code) {
+ case 0x0001: /* everything ok */
+ ret = 0;
+ break;
case 0x0003: /* invalid request block */
case 0x0007:
ret = -EINVAL;
case 0x0101: /* facility not provided */
ret = -EOPNOTSUPP;
break;
+ default: /* something went wrong */
+ ret = -EIO;
}
out:
free_page((unsigned long)sda_area);
driver_unregister(&smsg_driver);
return -EIO; /* better errno ? */
}
- rc = iucv_connect (&smsg_pathid, 1, 0, "*MSG ", 0, 0, 0, 0,
+ rc = iucv_connect (&smsg_pathid, 255, 0, "*MSG ", 0, 0, 0, 0,
smsg_handle, 0);
if (rc) {
printk(KERN_ERR "SMSGIUCV: failed to connect to *MSG");
* Reset the bus
*
*/
-static int aha152x_bus_reset(Scsi_Cmnd *SCpnt)
+static int aha152x_bus_reset_host(struct Scsi_Host *shpnt)
{
- struct Scsi_Host *shpnt = SCpnt->device->host;
unsigned long flags;
DO_LOCK(flags);
#if defined(AHA152X_DEBUG)
if(HOSTDATA(shpnt)->debug & debug_eh) {
- printk(DEBUG_LEAD "aha152x_bus_reset(%p)", CMDINFO(SCpnt), SCpnt);
+ printk(KERN_DEBUG "scsi%d: bus reset", shpnt->host_no);
show_queues(shpnt);
}
#endif
free_hard_reset_SCs(shpnt, &ISSUE_SC);
free_hard_reset_SCs(shpnt, &DISCONNECTED_SC);
- DPRINTK(debug_eh, DEBUG_LEAD "resetting bus\n", CMDINFO(SCpnt));
+ DPRINTK(debug_eh, KERN_DEBUG "scsi%d: resetting bus\n", shpnt->host_no);
SETPORT(SCSISEQ, SCSIRSTO);
mdelay(256);
SETPORT(SCSISEQ, 0);
mdelay(DELAY);
- DPRINTK(debug_eh, DEBUG_LEAD "bus resetted\n", CMDINFO(SCpnt));
+ DPRINTK(debug_eh, KERN_DEBUG "scsi%d: bus resetted\n", shpnt->host_no);
setup_expected_interrupts(shpnt);
if(HOSTDATA(shpnt)->commands==0)
return SUCCESS;
}
+/*
+ * Reset the bus
+ *
+ */
+static int aha152x_bus_reset(Scsi_Cmnd *SCpnt)
+{
+ return aha152x_bus_reset_host(SCpnt->device->host);
+}
/*
* Restore default values to the AIC-6260 registers and reset the fifos
* Reset the host (bus and controller)
*
*/
-int aha152x_host_reset(Scsi_Cmnd * SCpnt)
+int aha152x_host_reset_host(struct Scsi_Host *shpnt)
{
-#if defined(AHA152X_DEBUG)
- struct Scsi_Host *shpnt = SCpnt->device->host;
-#endif
-
- DPRINTK(debug_eh, DEBUG_LEAD "aha152x_host_reset(%p)\n", CMDINFO(SCpnt), SCpnt);
+ DPRINTK(debug_eh, KERN_DEBUG "scsi%d: host reset\n", shpnt->host_no);
- aha152x_bus_reset(SCpnt);
+ aha152x_bus_reset_host(shpnt);
- DPRINTK(debug_eh, DEBUG_LEAD "resetting ports\n", CMDINFO(SCpnt));
- reset_ports(SCpnt->device->host);
+ DPRINTK(debug_eh, KERN_DEBUG "scsi%d: resetting ports\n", shpnt->host_no);
+ reset_ports(shpnt);
return SUCCESS;
}
+/*
+ * Reset the host (bus and controller)
+ *
+ */
+static int aha152x_host_reset(Scsi_Cmnd *SCpnt)
+{
+ return aha152x_host_reset_host(SCpnt->device->host);
+}
+
/*
* Return the "logical geometry"
*
{
int i;
for (i = 0; i<ARRAY_SIZE(aha152x_host); i++) {
- struct Scsi_Host *shpnt = aha152x_host[i];
- if (shpnt && HOSTDATA(shpnt)->service) {
- HOSTDATA(shpnt)->service=0;
- is_complete(shpnt);
- }
+ is_complete(aha152x_host[i]);
}
}
/*
- * Interrupts handler
+ * Interrupt handler
*
*/
-
static irqreturn_t intr(int irqno, void *dev_id, struct pt_regs *regs)
{
struct Scsi_Host *shpnt = lookup_irq(irqno);
+ unsigned long flags;
unsigned char rev, dmacntrl0;
if (!shpnt) {
if ((rev == 0xFF) && (dmacntrl0 == 0xFF))
return IRQ_NONE;
+ if( TESTLO(DMASTAT, INTSTAT) )
+ return IRQ_NONE;
+
/* no more interrupts from the controller, while we're busy.
INTEN is restored by the BH handler */
CLRBITS(DMACNTRL0, INTEN);
-#if 0
- /* check if there is already something to be
- serviced; should not happen */
- if(HOSTDATA(shpnt)->service) {
- printk(KERN_ERR "aha152x%d: lost interrupt (%d)\n", HOSTNO, HOSTDATA(shpnt)->service);
- show_queues(shpnt);
+ DO_LOCK(flags);
+ if( HOSTDATA(shpnt)->service==0 ) {
+ HOSTDATA(shpnt)->service=1;
+
+ /* Poke the BH handler */
+ INIT_WORK(&aha152x_tq, (void *) run, NULL);
+ schedule_work(&aha152x_tq);
}
-#endif
-
- /* Poke the BH handler */
- HOSTDATA(shpnt)->service++;
- INIT_WORK(&aha152x_tq, (void *) run, NULL);
- schedule_work(&aha152x_tq);
+ DO_UNLOCK(flags);
+
return IRQ_HANDLED;
}
unsigned long flags;
int pending;
+ if(!shpnt)
+ return;
+
DO_LOCK(flags);
+
+ if( HOSTDATA(shpnt)->service==0 ) {
+ DO_UNLOCK(flags);
+ return;
+ }
+
+ HOSTDATA(shpnt)->service = 0;
+
if(HOSTDATA(shpnt)->in_intr) {
DO_UNLOCK(flags);
/* aha152x_error never returns.. */
struct Scsi_Host *aha152x_probe_one(struct aha152x_setup *);
void aha152x_release(struct Scsi_Host *);
-int aha152x_host_reset(Scsi_Cmnd *);
+int aha152x_host_reset_host(struct Scsi_Host *);
#endif /* _AHA152X_H */
struct ata_queued_cmd *qc;
qc = ata_qc_from_tag(ap, ap->active_tag);
if (!ahci_host_intr(ap, qc))
- if (ata_ratelimit()) {
- struct pci_dev *pdev =
- to_pci_dev(ap->host_set->dev);
- dev_printk(KERN_WARNING, &pdev->dev,
+ if (ata_ratelimit())
+ dev_printk(KERN_WARNING, host_set->dev,
"unhandled interrupt on port %u\n",
i);
- }
VPRINTK("port %u\n", i);
} else {
VPRINTK("port %u (no irq)\n", i);
- if (ata_ratelimit()) {
- struct pci_dev *pdev =
- to_pci_dev(ap->host_set->dev);
- dev_printk(KERN_WARNING, &pdev->dev,
+ if (ata_ratelimit())
+ dev_printk(KERN_WARNING, host_set->dev,
"interrupt on disabled port %u\n", i);
- }
}
irq_ack |= (1 << i);
return 0;
}
-static struct scsi_host_template driver_template = {
- .proc_name = "jazz_esp",
- .proc_info = &esp_proc_info,
- .name = "ESP 100/100a/200",
- .detect = jazz_esp_detect,
- .slave_alloc = esp_slave_alloc,
- .slave_destroy = esp_slave_destroy,
- .release = jazz_esp_release,
- .info = esp_info,
- .queuecommand = esp_queue,
- .eh_abort_handler = esp_abort,
- .eh_bus_reset_handler = esp_reset,
- .can_queue = 7,
- .this_id = 7,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = 1,
- .use_clustering = DISABLE_CLUSTERING,
-};
-
-#include "scsi_module.c"
-
/***************************************************************** Detection */
static int jazz_esp_detect(struct scsi_host_template *tpnt)
{
module_param(atapi_enabled, int, 0444);
MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)");
+int libata_fua = 0;
+module_param_named(fua, libata_fua, int, 0444);
+MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)");
+
MODULE_AUTHOR("Jeff Garzik");
MODULE_DESCRIPTION("Library module for ATA devices");
MODULE_LICENSE("GPL");
{
unsigned char model[41], fw[9];
+ if (!libata_fua)
+ return 0;
if (!ata_id_has_fua(id))
return 0;
/* libata-core.c */
extern int atapi_enabled;
+extern int libata_fua;
extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap,
struct ata_device *dev);
extern int ata_rwcmd_protocol(struct ata_queued_cmd *qc);
return 0;
}
+static int megasas_slave_configure(struct scsi_device *sdev)
+{
+ /*
+ * Don't export physical disk devices to the disk driver.
+ *
+ * FIXME: Currently we don't export them to the midlayer at all.
+ * That will be fixed once LSI engineers have audited the
+ * firmware for possible issues.
+ */
+ if (sdev->channel < MEGASAS_MAX_PD_CHANNELS && sdev->type == TYPE_DISK)
+ return -ENXIO;
+ return 0;
+}
+
/**
* megasas_wait_for_outstanding - Wait for all outstanding cmds
* @instance: Adapter soft state
.module = THIS_MODULE,
.name = "LSI Logic SAS based MegaRAID driver",
.proc_name = "megaraid_sas",
+ .slave_configure = megasas_slave_configure,
.queuecommand = megasas_queue_command,
.eh_device_reset_handler = megasas_reset_device,
.eh_bus_reset_handler = megasas_reset_bus_host,
break;
}
- /*
- * Don't export physical disk devices to mid-layer.
- */
- if (!MEGASAS_IS_LOGICAL(cmd->scmd) &&
- (hdr->cmd_status == MFI_STAT_OK) &&
- (cmd->scmd->cmnd[0] == INQUIRY)) {
-
- if (((*(u8 *) cmd->scmd->request_buffer) & 0x1F) ==
- TYPE_DISK) {
- cmd->scmd->result = DID_BAD_TARGET << 16;
- exception = 1;
- }
- }
-
case MFI_CMD_LD_READ:
case MFI_CMD_LD_WRITE:
link->state &= ~DEV_SUSPEND;
if (link->state & DEV_CONFIG) {
- Scsi_Cmnd tmp;
pcmcia_request_configuration(link->handle, &link->conf);
- tmp.device->host = info->host;
- aha152x_host_reset(&tmp);
+ aha152x_host_reset_host(info->host);
}
return 0;
#define DRV_VERSION "0.9"
enum {
+ SIL_FLAG_RERR_ON_DMA_ACT = (1 << 29),
SIL_FLAG_MOD15WRITE = (1 << 30),
sil_3112 = 0,
sil_3112_m15w = 1,
- sil_3114 = 2,
+ sil_3512 = 2,
+ sil_3114 = 3,
SIL_FIFO_R0 = 0x40,
SIL_FIFO_W0 = 0x41,
static const struct pci_device_id sil_pci_tbl[] = {
{ 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
{ 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
- { 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
+ { 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3512 },
{ 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 },
{ 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
{ 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
.port_ops = &sil_ops,
- }, /* sil_3112_15w - keep it sync'd w/ sil_3112 */
+ },
+ /* sil_3112_15w - keep it sync'd w/ sil_3112 */
{
.sht = &sil_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
.port_ops = &sil_ops,
- }, /* sil_3114 */
+ },
+ /* sil_3512 */
{
.sht = &sil_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SRST | ATA_FLAG_MMIO,
+ ATA_FLAG_SRST | ATA_FLAG_MMIO |
+ SIL_FLAG_RERR_ON_DMA_ACT,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x3f, /* udma0-5 */
+ .port_ops = &sil_ops,
+ },
+ /* sil_3114 */
+ {
+ .sht = &sil_sht,
+ .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_SRST | ATA_FLAG_MMIO |
+ SIL_FLAG_RERR_ON_DMA_ACT,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
unsigned long scr; /* SATA control register block */
unsigned long sien; /* SATA Interrupt Enable register */
unsigned long xfer_mode;/* data transfer mode register */
+ unsigned long sfis_cfg; /* SATA FIS reception config register */
} sil_port[] = {
/* port 0 ... */
- { 0x80, 0x8A, 0x00, 0x100, 0x148, 0xb4 },
- { 0xC0, 0xCA, 0x08, 0x180, 0x1c8, 0xf4 },
- { 0x280, 0x28A, 0x200, 0x300, 0x348, 0x2b4 },
- { 0x2C0, 0x2CA, 0x208, 0x380, 0x3c8, 0x2f4 },
+ { 0x80, 0x8A, 0x00, 0x100, 0x148, 0xb4, 0x14c },
+ { 0xC0, 0xCA, 0x08, 0x180, 0x1c8, 0xf4, 0x1cc },
+ { 0x280, 0x28A, 0x200, 0x300, 0x348, 0x2b4, 0x34c },
+ { 0x2C0, 0x2CA, 0x208, 0x380, 0x3c8, 0x2f4, 0x3cc },
/* ... port 3 */
};
dev_printk(KERN_WARNING, &pdev->dev,
"cache line size not set. Driver may not function\n");
+ /* Apply R_ERR on DMA activate FIS errata workaround */
+ if (probe_ent->host_flags & SIL_FLAG_RERR_ON_DMA_ACT) {
+ int cnt;
+
+ for (i = 0, cnt = 0; i < probe_ent->n_ports; i++) {
+ tmp = readl(mmio_base + sil_port[i].sfis_cfg);
+ if ((tmp & 0x3) != 0x01)
+ continue;
+ if (!cnt)
+ dev_printk(KERN_INFO, &pdev->dev,
+ "Applying R_ERR on DMA activate "
+ "FIS errata fix\n");
+ writel(tmp & ~0x3, mmio_base + sil_port[i].sfis_cfg);
+ cnt++;
+ }
+ }
+
if (ent->driver_data == sil_3114) {
irq_mask = SIL_MASK_4PORT;
* the request was not marked fast fail. Note that above,
* even if the request is marked fast fail, we still requeue
* for queue congestion conditions (QUEUE_FULL or BUSY) */
- if ((++scmd->retries) < scmd->allowed
+ if ((++scmd->retries) <= scmd->allowed
&& !blk_noretry_request(scmd->request)) {
return NEEDS_RETRY;
} else {
list_del_init(&scmd->eh_entry);
if (scsi_device_online(scmd->device) &&
!blk_noretry_request(scmd->request) &&
- (++scmd->retries < scmd->allowed)) {
+ (++scmd->retries <= scmd->allowed)) {
SCSI_LOG_ERROR_RECOVERY(3, printk("%s: flush"
" retry cmd: %p\n",
current->comm,
static void scsi_softirq_done(struct request *rq)
{
struct scsi_cmnd *cmd = rq->completion_data;
- unsigned long wait_for = cmd->allowed * cmd->timeout_per_command;
+ unsigned long wait_for = (cmd->allowed + 1) * cmd->timeout_per_command;
int disposition;
INIT_LIST_HEAD(&cmd->eh_entry);
transport_configure_device(&sdev->sdev_gendev);
- if (sdev->host->hostt->slave_configure)
- sdev->host->hostt->slave_configure(sdev);
+ if (sdev->host->hostt->slave_configure) {
+ int ret = sdev->host->hostt->slave_configure(sdev);
+ if (ret) {
+ /*
+ * if LLDD reports slave not present, don't clutter
+ * console with alloc failure messages
+ */
+ if (ret != -ENXIO) {
+ sdev_printk(KERN_ERR, sdev,
+ "failed to configure device\n");
+ }
+ return SCSI_SCAN_NO_RESPONSE;
+ }
+ }
/*
* Ok, the device is now all set up, we can
}
/* Search the bindings array */
- if (likely((ids->roles & FC_RPORT_ROLE_FCP_TARGET) &&
- (fc_host_tgtid_bind_type(shost) != FC_TGTID_BIND_NONE))) {
+ if (fc_host_tgtid_bind_type(shost) != FC_TGTID_BIND_NONE) {
/* search for a matching consistent binding */
srp->res_used = 1;
SCSI_LOG_TIMEOUT(4, printk("sg_link_reserve: size=%d\n", size));
- rem = size = (size + 1) & (~1); /* round to even for aha1542 */
+ rem = size;
for (k = 0; k < rsv_schp->k_use_sg; ++k, ++sg) {
num = sg->length;
SDev = cd->device;
if (!sense) {
- sense = kmalloc(sizeof(*sense), GFP_KERNEL);
+ sense = kmalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL);
if (!sense) {
err = -ENOMEM;
goto out;
tp->usrflags |= (SYM_DISC_ENABLED | SYM_TAGS_ENABLED);
tp->usrtags = SYM_SETUP_MAX_TAG;
+ tp->usr_width = np->maxwide;
+ tp->usr_period = 9;
sym_nvram_setup_target(tp, i, nvram);
int read_count, request_count = IOC4_MAX_CHARS;
struct uart_icount *icount;
struct uart_info *info = the_port->info;
- int flip = 0;
unsigned long pflags;
/* Make sure all the pointers are "good" ones */
spin_lock_irqsave(&the_port->lock, pflags);
tty = info->tty;
- request_count = tty_buffer_request_room(tty, IOC4_MAX_CHARS - 2);
+ request_count = tty_buffer_request_room(tty, IOC4_MAX_CHARS);
if (request_count > 0) {
icount = &the_port->icount;
spin_unlock_irqrestore(&the_port->lock, pflags);
- if (flip)
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(tty);
}
/**
if (up->port.info == NULL)
goto ack_tx_int;
xmit = &up->port.info->xmit;
- if (uart_circ_empty(xmit)) {
- uart_write_wakeup(&up->port);
+ if (uart_circ_empty(xmit))
goto ack_tx_int;
- }
if (uart_tx_stopped(&up->port))
goto ack_tx_int;
void uart_write_wakeup(struct uart_port *port)
{
struct uart_info *info = port->info;
+ /*
+ * This means you called this function _after_ the port was
+ * closed. No cookie for you.
+ */
+ BUG_ON(!info);
tasklet_schedule(&info->tlet);
}
}
static int
-uart_write(struct tty_struct *tty, const unsigned char * buf, int count)
+uart_write(struct tty_struct *tty, const unsigned char *buf, int count)
{
struct uart_state *state = tty->driver_data;
- struct uart_port *port = state->port;
- struct circ_buf *circ = &state->info->xmit;
+ struct uart_port *port;
+ struct circ_buf *circ;
unsigned long flags;
int c, ret = 0;
+ /*
+ * This means you called this function _after_ the port was
+ * closed. No cookie for you.
+ */
+ if (!state || !state->info) {
+ WARN_ON(1);
+ return -EL3HLT;
+ }
+
+ port = state->port;
+ circ = &state->info->xmit;
+
if (!circ->buf)
return 0;
struct uart_port *port = state->port;
unsigned long flags;
+ /*
+ * This means you called this function _after_ the port was
+ * closed. No cookie for you.
+ */
+ if (!state || !state->info) {
+ WARN_ON(1);
+ return;
+ }
+
DPRINTK("uart_flush_buffer(%d) called\n", tty->index);
spin_lock_irqsave(&port->lock, flags);
int retval;
if (!ia64_platform_is("sn2"))
- return -ENODEV;
+ return 0;
printk(KERN_INFO "sn_console: Console driver init\n");
static void sunsu_stop_rx(struct uart_port *port)
{
struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
- unsigned long flags;
- spin_lock_irqsave(&up->port.lock, flags);
up->ier &= ~UART_IER_RLSI;
up->port.read_status_mask &= ~UART_LSR_DR;
serial_out(up, UART_IER, up->ier);
- spin_unlock_irqrestore(&up->port.lock, flags);
}
static void sunsu_enable_ms(struct uart_port *port)
#
menu "SN Devices"
+ depends on SGI_SN
config SGI_IOC4
tristate "SGI IOC4 Base IO support"
- depends on (IA64_GENERIC || IA64_SGI_SN2) && MMTIMER
+ depends on MMTIMER
default m
---help---
This option enables basic support for the SGI IOC4-based Base IO
config SGI_IOC3
tristate "SGI IOC3 Base IO support"
- depends on (IA64_GENERIC || IA64_SGI_SN2)
default m
---help---
This option enables basic support for the SGI IOC3-based Base IO
return presence;
}
-static inline int nic_read_bit(struct ioc3_driver_data *idd)
+static int nic_read_bit(struct ioc3_driver_data *idd)
{
int result;
unsigned long flags;
return result;
}
-static inline void nic_write_bit(struct ioc3_driver_data *idd, int bit)
+static void nic_write_bit(struct ioc3_driver_data *idd, int bit)
{
if (bit)
writel(mcr_pack(6, 110), &idd->vma->mcr);
/* Interrupts */
-static inline void
-write_ireg(struct ioc3_driver_data *idd, uint32_t val, int which)
+static void write_ireg(struct ioc3_driver_data *idd, uint32_t val, int which)
{
unsigned long flags;
}
/* Add this IOC3 to all submodules */
- read_lock(&ioc3_submodules_lock);
for(id=0;id<IOC3_MAX_SUBMODULES;id++)
if(ioc3_submodules[id] && ioc3_submodules[id]->probe) {
idd->active[id] = 1;
idd->active[id] = !ioc3_submodules[id]->probe
(ioc3_submodules[id], idd);
}
- read_unlock(&ioc3_submodules_lock);
printk(KERN_INFO "IOC3 Master Driver loaded for %s\n", pci_name(pdev));
idd = pci_get_drvdata(pdev);
/* Remove this IOC3 from all submodules */
- read_lock(&ioc3_submodules_lock);
for(id=0;id<IOC3_MAX_SUBMODULES;id++)
if(idd->active[id]) {
if(ioc3_submodules[id] && ioc3_submodules[id]->remove)
pci_name(pdev));
idd->active[id] = 0;
}
- read_unlock(&ioc3_submodules_lock);
/* Clear and disable all IRQs */
write_ireg(idd, ~0, IOC3_W_IEC);
ep->pio_irqs = 0;
ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+ spin_unlock_irqrestore(&ep->dev->lock, flags);
+
/* Reset halt state (does flush) */
lh7a40x_set_halt(_ep, 0);
- spin_unlock_irqrestore(&ep->dev->lock, flags);
-
DEBUG("%s: enabled %s\n", __FUNCTION__, _ep->name);
return 0;
}
break;
qep = &dev->ep[ep_num];
+ spin_unlock(&dev->lock);
if (ctrl.bRequest == USB_REQ_SET_FEATURE) {
DEBUG_SETUP("SET_FEATURE (%d)\n",
ep_num);
ep_num);
lh7a40x_set_halt(&qep->ep, 0);
}
+ spin_lock(&dev->lock);
usb_set_index(0);
/* Reply with a ZLP on next IN token */
// DEBUG("%s: OID = %08X\n", __FUNCTION__, cpu_to_le32(buf->OID));
if (!rndis_per_dev_params [configNr].dev) return -ENOTSUPP;
- /*
- * we need more memory:
- * oid_supported_list is the largest answer
+ /*
+ * we need more memory:
+ * gen_ndis_query_resp expects enough space for
+ * rndis_query_cmplt_type followed by data.
+ * oid_supported_list is the largest data reply
*/
- r = rndis_add_response (configNr, sizeof (oid_supported_list));
+ r = rndis_add_response (configNr,
+ sizeof (oid_supported_list) + sizeof(rndis_query_cmplt_type));
if (!r)
return -ENOMEM;
resp = (rndis_query_cmplt_type *) r->buf;
offset + EHCI_USBLEGCTLSTS,
val | EHCI_USBLEGCTLSTS_SOOE);
#endif
- }
- /* always say Linux will own the hardware
- * by setting EHCI_USBLEGSUP_OS.
- */
- pci_write_config_byte(pdev, offset + 3, 1);
+ /* some systems get upset if this semaphore is
+ * set for any other reason than forcing a BIOS
+ * handoff..
+ */
+ pci_write_config_byte(pdev, offset + 3, 1);
+ }
/* if boot firmware now owns EHCI, spin till
* it hands it over.
#define USB_VENDOR_ID_WISEGROUP 0x0925
#define USB_DEVICE_ID_1_PHIDGETSERVO_20 0x8101
#define USB_DEVICE_ID_4_PHIDGETSERVO_20 0x8104
+#define USB_DEVICE_ID_DUAL_USB_JOYPAD 0x8866
#define USB_VENDOR_ID_CODEMERCS 0x07c0
#define USB_DEVICE_ID_CODEMERCS_IOW40 0x1500
{ USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_USBHUB_KB, HID_QUIRK_NOGET},
{ USB_VENDOR_ID_HP, USB_DEVICE_ID_HP_USBHUB_KB, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_TANGTOP, USB_DEVICE_ID_TANGTOP_USBPS2, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_POWERMOUSE, HID_QUIRK_2WHEEL_POWERMOUSE },
{ USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU, HID_QUIRK_2WHEEL_MOUSE_HACK_7 },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_7_PID) },
{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_KW_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_YS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_IC_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_DB9_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_RS232_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y9_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_VCP_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_D2XX_PID) },
{ USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
/*
* microHAM product IDs (http://www.microham.com).
- * Submitted by Justin Burket (KL1RL) <zorton@jtan.com>.
+ * Submitted by Justin Burket (KL1RL) <zorton@jtan.com>
+ * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>.
+ * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file.
*/
+#define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */
+#define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */
#define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */
#define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */
+#define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */
+#define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */
+#define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */
+#define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */
/*
* Active Robots product ids.
down(&port->sem);
- if (port->open_count == 0)
- goto out;
+ if (port->open_count == 0) {
+ up(&port->sem);
+ return;
+ }
--port->open_count;
if (port->open_count == 0) {
module_put(port->serial->type->driver.owner);
}
- kref_put(&port->serial->kref, destroy_serial);
-
-out:
up(&port->sem);
+ kref_put(&port->serial->kref, destroy_serial);
}
static int serial_write (struct tty_struct * tty, const unsigned char *buf, int count)
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO600_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+ { USB_DEVICE(GSPDA_VENDOR_ID, GSPDA_XPLORE_M68_ID),
+ .driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID),
{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID) },
{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO_ID) },
{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO600_ID) },
+ { USB_DEVICE(GSPDA_VENDOR_ID, GSPDA_XPLORE_M68_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M515_ID) },
#define PALM_ZIRE_ID 0x0070
#define PALM_M100_ID 0x0080
+#define GSPDA_VENDOR_ID 0x115e
+#define GSPDA_XPLORE_M68_ID 0xf100
+
#define SONY_VENDOR_ID 0x054C
#define SONY_CLIE_3_5_ID 0x0038
#define SONY_CLIE_4_0_ID 0x0066
"Flashgate",
US_SC_SCSI, US_PR_BULK, NULL, 0 ),
+/* Reported by David Hamilton <niftimusmaximus@lycos.com> */
+UNUSUAL_DEV( 0x069b, 0x3004, 0x0001, 0x0001,
+ "Thomson Multimedia Inc.",
+ "RCA RD1080 MP3 Player",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
UNUSUAL_DEV( 0x0781, 0x0001, 0x0200, 0x0200,
"Sandisk",
"ImageMate SDDR-05a",
{
unsigned char *src;
unsigned int xindex, yindex, chipindex, linesize;
- int i, count;
+ int i;
unsigned char val;
unsigned char bitmask, rightshift;
}
ks108_writeb_data(par, chipindex, val);
left++;
- count++;
if (bitmask == 0x80) {
bitmask = 1;
src++;
inode = file->f_dentry->d_inode;
fbidx = iminor(inode);
info = registered_fb[fbidx];
- par = info->par;
if (!info || !info->screen_base)
return -ENODEV;
+ par = info->par;
xres = info->var.xres;
fbmemlength = (xres * info->var.yres)/8;
unsigned char post_dividers[] = {1,2,4,8,3,6,12};
u32 output_freq;
u32 vclk; /* in .01 MHz */
- int i;
+ int i = 0;
u32 n, d;
vclk = 100000000 / period_in_ps; /* convert units to 10 kHz */
/* now, find an acceptable divider */
for (i = 0; i < sizeof(post_dividers); i++) {
output_freq = post_dividers[i] * vclk;
- if (output_freq >= c.ppll_min && output_freq <= c.ppll_max)
+ if (output_freq >= c.ppll_min && output_freq <= c.ppll_max) {
+ pll->post_divider = post_dividers[i];
break;
+ }
}
/* calculate feedback divider */
n = c.ref_divider * output_freq;
d = c.ref_clk;
- pll->post_divider = post_dividers[i];
pll->feedback_divider = round_div(n, d);
pll->vclk = vclk;
s1[i] = *s;
i++;
}
+
+ if (i > 4)
+ i = 4;
+
} while (*s++);
if (second)
s2[i] = 0;
new_bd = kmalloc(sizeof(struct backlight_device), GFP_KERNEL);
if (unlikely(!new_bd))
- return ERR_PTR(ENOMEM);
+ return ERR_PTR(-ENOMEM);
init_MUTEX(&new_bd->sem);
new_bd->props = bp;
new_ld = kmalloc(sizeof(struct lcd_device), GFP_KERNEL);
if (unlikely(!new_ld))
- return ERR_PTR(ENOMEM);
+ return ERR_PTR(-ENOMEM);
init_MUTEX(&new_ld->sem);
new_ld->props = lp;
default:
printk(KERN_INFO "imsttfb: Device 0x%x unknown, "
"contact maintainer.\n", pdev->device);
+ release_mem_region(addr, size);
+ framebuffer_release(info);
return -ENODEV;
}
if (regno > 255)
return 1;
- switch (dinfo->depth) {
- case 8:
- {
- red >>= 8;
- green >>= 8;
- blue >>= 8;
+ if (dinfo->depth == 8) {
+ red >>= 8;
+ green >>= 8;
+ blue >>= 8;
+
+ intelfbhw_setcolreg(dinfo, regno, red, green, blue,
+ transp);
+ }
- intelfbhw_setcolreg(dinfo, regno, red, green, blue,
- transp);
+ if (regno < 16) {
+ switch (dinfo->depth) {
+ case 15:
+ dinfo->pseudo_palette[regno] = ((red & 0xf800) >> 1) |
+ ((green & 0xf800) >> 6) |
+ ((blue & 0xf800) >> 11);
+ break;
+ case 16:
+ dinfo->pseudo_palette[regno] = (red & 0xf800) |
+ ((green & 0xfc00) >> 5) |
+ ((blue & 0xf800) >> 11);
+ break;
+ case 24:
+ dinfo->pseudo_palette[regno] = ((red & 0xff00) << 8) |
+ (green & 0xff00) |
+ ((blue & 0xff00) >> 8);
+ break;
}
- break;
- case 15:
- dinfo->pseudo_palette[regno] = ((red & 0xf800) >> 1) |
- ((green & 0xf800) >> 6) |
- ((blue & 0xf800) >> 11);
- break;
- case 16:
- dinfo->pseudo_palette[regno] = (red & 0xf800) |
- ((green & 0xfc00) >> 5) |
- ((blue & 0xf800) >> 11);
- break;
- case 24:
- dinfo->pseudo_palette[regno] = ((red & 0xff00) << 8) |
- (green & 0xff00) |
- ((blue & 0xff00) >> 8);
- break;
}
+
return 0;
}
void DisableVGA(volatile STG4000REG __iomem *pSTGReg)
{
u32 tmp;
- volatile u32 count, i;
+ volatile u32 count = 0, i;
/* Reset the VGA registers */
tmp = STG_READ_REG(SoftwareReset);
static inline int neo2200_sync(struct fb_info *info)
{
struct neofb_par *par = info->par;
- int waitcycles;
- while (readl(&par->neo2200->bltStat) & 1)
- waitcycles++;
+ while (readl(&par->neo2200->bltStat) & 1);
return 0;
}
goto bail;
}
+ platform_set_drvdata(pdev, info);
default_par = info->par;
default_par->regs = ioremap_nocache(pdev->resource[1].start,
pdev->resource[1].end - pdev->resource[1].start +1);
goto bail;
}
- platform_set_drvdata(pdev, info);
-
printk(KERN_INFO "fb%d: %s frame buffer device\n",
info->node, info->fix.id);
#if defined(CONFIG_FB_SAVAGE_I2C)
savagefb_create_i2c_busses(info);
savagefb_probe_i2c_connector(info, &par->edid);
- kfree(par->edid);
fb_edid_to_monspecs(par->edid, &info->monspecs);
+ kfree(par->edid);
fb_videomode_to_modelist(info->monspecs.modedb,
info->monspecs.modedb_len,
&info->modelist);
if (regno >= info->cmap.len || regno > 255) return 1;
switch (info->fix.visual) {
- case FB_VISUAL_PSEUDOCOLOR:
- rgbcol =(((u32)red & 0xff00) << 8) |
- (((u32)green & 0xff00) << 0) |
- (((u32)blue & 0xff00) >> 8);
- do_setpalentry(par, regno, rgbcol);
- break;
- /* Truecolor has no hardware color palettes. */
- case FB_VISUAL_TRUECOLOR:
+ case FB_VISUAL_PSEUDOCOLOR:
+ rgbcol =(((u32)red & 0xff00) << 8) |
+ (((u32)green & 0xff00) << 0) |
+ (((u32)blue & 0xff00) >> 8);
+ do_setpalentry(par, regno, rgbcol);
+ break;
+ /* Truecolor has no hardware color palettes. */
+ case FB_VISUAL_TRUECOLOR:
+ if (regno < 16) {
rgbcol = (CNVT_TOHW( red, info->var.red.length) <<
info->var.red.offset) |
- (CNVT_TOHW( green, info->var.green.length) <<
- info->var.green.offset) |
- (CNVT_TOHW( blue, info->var.blue.length) <<
- info->var.blue.offset) |
- (CNVT_TOHW( transp, info->var.transp.length) <<
- info->var.transp.offset);
- par->palette[regno] = rgbcol;
- break;
- default:
- DPRINTK("bad depth %u\n", info->var.bits_per_pixel);
- break;
+ (CNVT_TOHW( green, info->var.green.length) <<
+ info->var.green.offset) |
+ (CNVT_TOHW( blue, info->var.blue.length) <<
+ info->var.blue.offset) |
+ (CNVT_TOHW( transp, info->var.transp.length) <<
+ info->var.transp.offset);
+ par->palette[regno] = rgbcol;
+ }
+
+ break;
+ default:
+ DPRINTK("bad depth %u\n", info->var.bits_per_pixel);
+ break;
}
+
return 0;
}
if (!rc)
return;
- dprintk(DEBUG_9P, "tcall id %d rcall id %d\n", tc->id, rc->id);
v9ses = a;
if (rc->id == RCLUNK)
v9fs_put_idpool(fid, &v9ses->fidpool);
/*
* V9FS FID Management
*
- * Copyright (C) 2005 by Eric Van Hensbergen <ericvh@gmail.com>
+ * Copyright (C) 2005, 2006 by Eric Van Hensbergen <ericvh@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
*
*/
-static int v9fs_fid_insert(struct v9fs_fid *fid, struct dentry *dentry)
+int v9fs_fid_insert(struct v9fs_fid *fid, struct dentry *dentry)
{
struct list_head *fid_list = (struct list_head *)dentry->d_fsdata;
dprintk(DEBUG_9P, "fid %d (%p) dentry %s (%p)\n", fid->fid, fid,
}
fid->uid = current->uid;
- fid->pid = current->pid;
list_add(&fid->list, fid_list);
return 0;
}
*
*/
-struct v9fs_fid *v9fs_fid_create(struct dentry *dentry,
- struct v9fs_session_info *v9ses, int fid, int create)
+struct v9fs_fid *v9fs_fid_create(struct v9fs_session_info *v9ses, int fid)
{
struct v9fs_fid *new;
- dprintk(DEBUG_9P, "fid create dentry %p, fid %d, create %d\n",
- dentry, fid, create);
-
+ dprintk(DEBUG_9P, "fid create fid %d\n", fid);
new = kmalloc(sizeof(struct v9fs_fid), GFP_KERNEL);
if (new == NULL) {
dprintk(DEBUG_ERROR, "Out of Memory\n");
new->fid = fid;
new->v9ses = v9ses;
new->fidopen = 0;
- new->fidcreate = create;
new->fidclunked = 0;
new->iounit = 0;
new->rdir_pos = 0;
new->rdir_fcall = NULL;
+ INIT_LIST_HEAD(&new->list);
- if (v9fs_fid_insert(new, dentry) == 0)
- return new;
- else {
- dprintk(DEBUG_ERROR, "Problems inserting to dentry\n");
- kfree(new);
- return NULL;
- }
+ return new;
}
/**
kfree(fid);
}
-/**
- * v9fs_fid_walk_up - walks from the process current directory
- * up to the specified dentry.
- */
-static struct v9fs_fid *v9fs_fid_walk_up(struct dentry *dentry)
-{
- int fidnum, cfidnum, err;
- struct v9fs_fid *cfid;
- struct dentry *cde;
- struct v9fs_session_info *v9ses;
-
- v9ses = v9fs_inode2v9ses(current->fs->pwd->d_inode);
- cfid = v9fs_fid_lookup(current->fs->pwd);
- if (cfid == NULL) {
- dprintk(DEBUG_ERROR, "process cwd doesn't have a fid\n");
- return ERR_PTR(-ENOENT);
- }
-
- cfidnum = cfid->fid;
- cde = current->fs->pwd;
- /* TODO: take advantage of multiwalk */
-
- fidnum = v9fs_get_idpool(&v9ses->fidpool);
- if (fidnum < 0) {
- dprintk(DEBUG_ERROR, "could not get a new fid num\n");
- err = -ENOENT;
- goto clunk_fid;
- }
-
- while (cde != dentry) {
- if (cde == cde->d_parent) {
- dprintk(DEBUG_ERROR, "can't find dentry\n");
- err = -ENOENT;
- goto clunk_fid;
- }
-
- err = v9fs_t_walk(v9ses, cfidnum, fidnum, "..", NULL);
- if (err < 0) {
- dprintk(DEBUG_ERROR, "problem walking to parent\n");
- goto clunk_fid;
- }
-
- cfidnum = fidnum;
- cde = cde->d_parent;
- }
-
- return v9fs_fid_create(dentry, v9ses, fidnum, 0);
-
-clunk_fid:
- v9fs_t_clunk(v9ses, fidnum);
- return ERR_PTR(err);
-}
-
/**
* v9fs_fid_lookup - retrieve the right fid from a particular dentry
* @dentry: dentry to look for fid in
* @type: intent of lookup (operation or traversal)
*
- * search list of fids associated with a dentry for a fid with a matching
- * thread id or uid. If that fails, look up the dentry's parents to see if you
- * can find a matching fid.
+ * find a fid in the dentry
+ *
+ * TODO: only match fids that have the same uid as current user
*
*/
struct v9fs_fid *v9fs_fid_lookup(struct dentry *dentry)
{
struct list_head *fid_list = (struct list_head *)dentry->d_fsdata;
- struct v9fs_fid *current_fid = NULL;
- struct v9fs_fid *temp = NULL;
struct v9fs_fid *return_fid = NULL;
dprintk(DEBUG_9P, " dentry: %s (%p)\n", dentry->d_iname, dentry);
- if (fid_list) {
- list_for_each_entry_safe(current_fid, temp, fid_list, list) {
- if (!current_fid->fidcreate) {
- return_fid = current_fid;
- break;
- }
- }
-
- if (!return_fid)
- return_fid = current_fid;
- }
-
- /* we are at the root but didn't match */
- if ((!return_fid) && (dentry->d_parent == dentry)) {
- /* TODO: clone attach with new uid */
- return_fid = current_fid;
- }
+ if (fid_list)
+ return_fid = list_entry(fid_list->next, struct v9fs_fid, list);
if (!return_fid) {
- struct dentry *par = current->fs->pwd->d_parent;
- int count = 1;
- while (par != NULL) {
- if (par == dentry)
- break;
- count++;
- if (par == par->d_parent) {
- dprintk(DEBUG_ERROR,
- "got to root without finding dentry\n");
- break;
- }
- par = par->d_parent;
- }
-
-/* XXX - there may be some duplication we can get rid of */
- if (par == dentry) {
- return_fid = v9fs_fid_walk_up(dentry);
- if (IS_ERR(return_fid))
- return_fid = NULL;
- }
+ dprintk(DEBUG_ERROR, "Couldn't find a fid in dentry\n");
}
return return_fid;
}
-
-struct v9fs_fid *v9fs_fid_get_created(struct dentry *dentry)
-{
- struct list_head *fid_list;
- struct v9fs_fid *fid, *ftmp, *ret;
-
- dprintk(DEBUG_9P, " dentry: %s (%p)\n", dentry->d_iname, dentry);
- fid_list = (struct list_head *)dentry->d_fsdata;
- ret = NULL;
- if (fid_list) {
- list_for_each_entry_safe(fid, ftmp, fid_list, list) {
- if (fid->fidcreate && fid->pid == current->pid) {
- list_del(&fid->list);
- ret = fid;
- break;
- }
- }
- }
-
- dprintk(DEBUG_9P, "return %p\n", ret);
- return ret;
-}
u32 fid;
unsigned char fidopen; /* set when fid is opened */
- unsigned char fidcreate; /* set when fid was just created */
unsigned char fidclunked; /* set when fid has already been clunked */
struct v9fs_qid qid;
struct v9fs_fcall *rdir_fcall;
/* management stuff */
- pid_t pid; /* thread associated with this fid */
uid_t uid; /* user associated with this fid */
/* private data */
struct v9fs_fid *v9fs_fid_lookup(struct dentry *dentry);
struct v9fs_fid *v9fs_fid_get_created(struct dentry *);
void v9fs_fid_destroy(struct v9fs_fid *fid);
-struct v9fs_fid *v9fs_fid_create(struct dentry *,
- struct v9fs_session_info *v9ses, int fid, int create);
+struct v9fs_fid *v9fs_fid_create(struct v9fs_session_info *, int fid);
+int v9fs_fid_insert(struct v9fs_fid *fid, struct dentry *dentry);
if (!trans || trans->status != Connected || !ts)
return -EIO;
+ oldfs = get_fs();
set_fs(get_ds());
/* The cast to a user pointer is valid due to the set_fs() */
ret = vfs_write(ts->out_file, (void __user *)v, len, &ts->out_file->f_pos);
}
if (v9ses->afid != ~0) {
+ dprintk(DEBUG_ERROR, "afid not equal to ~0\n");
if (v9fs_t_clunk(v9ses, v9ses->afid))
dprintk(DEBUG_ERROR, "clunk failed\n");
}
int v9fs_file_open(struct inode *inode, struct file *file);
void v9fs_inode2stat(struct inode *inode, struct v9fs_stat *stat);
void v9fs_dentry_release(struct dentry *);
+int v9fs_uflags2omode(int uflags);
#include "fid.h"
/**
- * v9fs_dentry_validate - VFS dcache hook to validate cache
- * @dentry: dentry that is being validated
- * @nd: path data
+ * v9fs_dentry_delete - called when dentry refcount equals 0
+ * @dentry: dentry in question
*
- * dcache really shouldn't be used for 9P2000 as at all due to
- * potential attached semantics to directory traversal (walk).
- *
- * FUTURE: look into how to use dcache to allow multi-stage
- * walks in Plan 9 & potential for better dcache operation which
- * would remain valid for Plan 9 semantics. Older versions
- * had validation via stat for those interested. However, since
- * stat has the same approximate overhead as walk there really
- * is no difference. The only improvement would be from a
- * time-decay cache like NFS has and that undermines the
- * synchronous nature of 9P2000.
+ * By returning 1 here we should remove cacheing of unused
+ * dentry components.
*
*/
-static int v9fs_dentry_validate(struct dentry *dentry, struct nameidata *nd)
+int v9fs_dentry_delete(struct dentry *dentry)
{
- struct dentry *dc = current->fs->pwd;
-
- dprintk(DEBUG_VFS, "dentry: %s (%p)\n", dentry->d_iname, dentry);
- if (v9fs_fid_lookup(dentry)) {
- dprintk(DEBUG_VFS, "VALID\n");
- return 1;
- }
-
- while (dc != NULL) {
- if (dc == dentry) {
- dprintk(DEBUG_VFS, "VALID\n");
- return 1;
- }
- if (dc == dc->d_parent)
- break;
-
- dc = dc->d_parent;
- }
-
- dprintk(DEBUG_VFS, "INVALID\n");
- return 0;
+ dprintk(DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_iname, dentry);
+ return 1;
}
/**
}
struct dentry_operations v9fs_dentry_operations = {
- .d_revalidate = v9fs_dentry_validate,
+ .d_delete = v9fs_dentry_delete,
.d_release = v9fs_dentry_release,
};
int v9fs_file_open(struct inode *inode, struct file *file)
{
struct v9fs_session_info *v9ses = v9fs_inode2v9ses(inode);
- struct v9fs_fid *v9fid, *fid;
+ struct v9fs_fid *vfid;
struct v9fs_fcall *fcall = NULL;
- int open_mode = 0;
- unsigned int iounit = 0;
- int newfid = -1;
- long result = -1;
+ int omode;
+ int fid = V9FS_NOFID;
+ int err;
dprintk(DEBUG_VFS, "inode: %p file: %p \n", inode, file);
- v9fid = v9fs_fid_get_created(file->f_dentry);
- if (!v9fid)
- v9fid = v9fs_fid_lookup(file->f_dentry);
-
- if (!v9fid) {
+ vfid = v9fs_fid_lookup(file->f_dentry);
+ if (!vfid) {
dprintk(DEBUG_ERROR, "Couldn't resolve fid from dentry\n");
return -EBADF;
}
- if (!v9fid->fidcreate) {
- fid = kmalloc(sizeof(struct v9fs_fid), GFP_KERNEL);
- if (fid == NULL) {
- dprintk(DEBUG_ERROR, "Out of Memory\n");
- return -ENOMEM;
- }
-
- fid->fidopen = 0;
- fid->fidcreate = 0;
- fid->fidclunked = 0;
- fid->iounit = 0;
- fid->v9ses = v9ses;
-
- newfid = v9fs_get_idpool(&v9ses->fidpool);
- if (newfid < 0) {
+ fid = v9fs_get_idpool(&v9ses->fidpool);
+ if (fid < 0) {
eprintk(KERN_WARNING, "newfid fails!\n");
return -ENOSPC;
}
- result =
- v9fs_t_walk(v9ses, v9fid->fid, newfid, NULL, NULL);
-
- if (result < 0) {
- v9fs_put_idpool(newfid, &v9ses->fidpool);
+ err = v9fs_t_walk(v9ses, vfid->fid, fid, NULL, NULL);
+ if (err < 0) {
dprintk(DEBUG_ERROR, "rewalk didn't work\n");
- return -EBADF;
+ goto put_fid;
+ }
+
+ vfid = kmalloc(sizeof(struct v9fs_fid), GFP_KERNEL);
+ if (vfid == NULL) {
+ dprintk(DEBUG_ERROR, "out of memory\n");
+ goto clunk_fid;
}
- fid->fid = newfid;
- v9fid = fid;
/* TODO: do special things for O_EXCL, O_NOFOLLOW, O_SYNC */
/* translate open mode appropriately */
- open_mode = file->f_flags & 0x3;
+ omode = v9fs_uflags2omode(file->f_flags);
+ err = v9fs_t_open(v9ses, fid, omode, &fcall);
+ if (err < 0) {
+ PRINT_FCALL_ERROR("open failed", fcall);
+ goto destroy_vfid;
+ }
- if (file->f_flags & O_EXCL)
- open_mode |= V9FS_OEXCL;
+ file->private_data = vfid;
+ vfid->fid = fid;
+ vfid->fidopen = 1;
+ vfid->fidclunked = 0;
+ vfid->iounit = fcall->params.ropen.iounit;
+ vfid->rdir_pos = 0;
+ vfid->rdir_fcall = NULL;
+ vfid->filp = file;
+ kfree(fcall);
- if (v9ses->extended) {
- if (file->f_flags & O_TRUNC)
- open_mode |= V9FS_OTRUNC;
+ return 0;
- if (file->f_flags & O_APPEND)
- open_mode |= V9FS_OAPPEND;
- }
+destroy_vfid:
+ v9fs_fid_destroy(vfid);
- result = v9fs_t_open(v9ses, newfid, open_mode, &fcall);
- if (result < 0) {
- PRINT_FCALL_ERROR("open failed", fcall);
- kfree(fcall);
- return result;
- }
+clunk_fid:
+ v9fs_t_clunk(v9ses, fid);
- iounit = fcall->params.ropen.iounit;
+put_fid:
+ v9fs_put_idpool(fid, &v9ses->fidpool);
kfree(fcall);
- } else {
- /* create case */
- newfid = v9fid->fid;
- iounit = v9fid->iounit;
- v9fid->fidcreate = 0;
- }
-
- file->private_data = v9fid;
-
- v9fid->rdir_pos = 0;
- v9fid->rdir_fcall = NULL;
- v9fid->fidopen = 1;
- v9fid->filp = file;
- v9fid->iounit = iounit;
- return 0;
+ return err;
}
/**
total += result;
} while (count);
- if(inode->i_mapping->nrpages)
invalidate_inode_pages2(inode->i_mapping);
-
return total;
}
return res;
}
+int v9fs_uflags2omode(int uflags)
+{
+ int ret;
+
+ ret = 0;
+ switch (uflags&3) {
+ default:
+ case O_RDONLY:
+ ret = V9FS_OREAD;
+ break;
+
+ case O_WRONLY:
+ ret = V9FS_OWRITE;
+ break;
+
+ case O_RDWR:
+ ret = V9FS_ORDWR;
+ break;
+ }
+
+ if (uflags & O_EXCL)
+ ret |= V9FS_OEXCL;
+
+ if (uflags & O_TRUNC)
+ ret |= V9FS_OTRUNC;
+
+ if (uflags & O_APPEND)
+ ret |= V9FS_OAPPEND;
+
+ return ret;
+}
+
/**
* v9fs_blank_wstat - helper function to setup a 9P stat structure
* @v9ses: 9P session info (for determining extended mode)
struct inode *v9fs_get_inode(struct super_block *sb, int mode)
{
- struct inode *inode = NULL;
+ struct inode *inode;
struct v9fs_session_info *v9ses = sb->s_fs_info;
dprintk(DEBUG_VFS, "super block: %p mode: %o\n", sb, mode);
return inode;
}
-/**
- * v9fs_create - helper function to create files and directories
- * @dir: directory inode file is being created in
- * @file_dentry: dentry file is being created in
- * @perm: permissions file is being created with
- * @open_mode: resulting open mode for file
- *
- */
-
static int
-v9fs_create(struct inode *dir,
- struct dentry *file_dentry,
- unsigned int perm, unsigned int open_mode)
+v9fs_create(struct v9fs_session_info *v9ses, u32 pfid, char *name,
+ u32 perm, u8 mode, u32 *fidp, struct v9fs_qid *qid, u32 *iounit)
{
- struct v9fs_session_info *v9ses = v9fs_inode2v9ses(dir);
- struct super_block *sb = dir->i_sb;
- struct v9fs_fid *dirfid =
- v9fs_fid_lookup(file_dentry->d_parent);
- struct v9fs_fid *fid = NULL;
- struct inode *file_inode = NULL;
- struct v9fs_fcall *fcall = NULL;
- struct v9fs_qid qid;
- int dirfidnum = -1;
- long newfid = -1;
- int result = 0;
- unsigned int iounit = 0;
- int wfidno = -1;
+ u32 fid;
int err;
+ struct v9fs_fcall *fcall;
- perm = unixmode2p9mode(v9ses, perm);
-
- dprintk(DEBUG_VFS, "dir: %p dentry: %p perm: %o mode: %o\n", dir,
- file_dentry, perm, open_mode);
-
- if (!dirfid)
- return -EBADF;
-
- dirfidnum = dirfid->fid;
- if (dirfidnum < 0) {
- dprintk(DEBUG_ERROR, "No fid for the directory #%lu\n",
- dir->i_ino);
- return -EBADF;
- }
-
- if (file_dentry->d_inode) {
- dprintk(DEBUG_ERROR,
- "Odd. There is an inode for dir %lu, name :%s:\n",
- dir->i_ino, file_dentry->d_name.name);
- return -EEXIST;
- }
-
- newfid = v9fs_get_idpool(&v9ses->fidpool);
- if (newfid < 0) {
+ fid = v9fs_get_idpool(&v9ses->fidpool);
+ if (fid < 0) {
eprintk(KERN_WARNING, "no free fids available\n");
return -ENOSPC;
}
- result = v9fs_t_walk(v9ses, dirfidnum, newfid, NULL, &fcall);
- if (result < 0) {
+ err = v9fs_t_walk(v9ses, pfid, fid, NULL, &fcall);
+ if (err < 0) {
PRINT_FCALL_ERROR("clone error", fcall);
- v9fs_put_idpool(newfid, &v9ses->fidpool);
- newfid = -1;
- goto CleanUpFid;
+ goto error;
}
-
kfree(fcall);
- fcall = NULL;
- result = v9fs_t_create(v9ses, newfid, (char *)file_dentry->d_name.name,
- perm, open_mode, &fcall);
- if (result < 0) {
+ err = v9fs_t_create(v9ses, fid, name, perm, mode, &fcall);
+ if (err < 0) {
PRINT_FCALL_ERROR("create fails", fcall);
- goto CleanUpFid;
+ goto error;
}
- iounit = fcall->params.rcreate.iounit;
- qid = fcall->params.rcreate.qid;
+ if (iounit)
+ *iounit = fcall->params.rcreate.iounit;
+
+ if (qid)
+ *qid = fcall->params.rcreate.qid;
+
+ if (fidp)
+ *fidp = fid;
+
kfree(fcall);
- fcall = NULL;
+ return 0;
- if (!(perm&V9FS_DMDIR)) {
- fid = v9fs_fid_create(file_dentry, v9ses, newfid, 1);
- dprintk(DEBUG_VFS, "fid %p %d\n", fid, fid->fidcreate);
- if (!fid) {
- result = -ENOMEM;
- goto CleanUpFid;
- }
+error:
+ if (fid >= 0)
+ v9fs_put_idpool(fid, &v9ses->fidpool);
- fid->qid = qid;
- fid->iounit = iounit;
- } else {
- err = v9fs_t_clunk(v9ses, newfid);
- newfid = -1;
- if (err < 0)
- dprintk(DEBUG_ERROR, "clunk for mkdir failed: %d\n", err);
- }
+ kfree(fcall);
+ return err;
+}
+
+static struct v9fs_fid*
+v9fs_clone_walk(struct v9fs_session_info *v9ses, u32 fid, struct dentry *dentry)
+{
+ int err;
+ u32 nfid;
+ struct v9fs_fid *ret;
+ struct v9fs_fcall *fcall;
- /* walk to the newly created file and put the fid in the dentry */
- wfidno = v9fs_get_idpool(&v9ses->fidpool);
- if (wfidno < 0) {
+ nfid = v9fs_get_idpool(&v9ses->fidpool);
+ if (nfid < 0) {
eprintk(KERN_WARNING, "no free fids available\n");
- return -ENOSPC;
+ return ERR_PTR(-ENOSPC);
}
- result = v9fs_t_walk(v9ses, dirfidnum, wfidno,
- (char *) file_dentry->d_name.name, &fcall);
- if (result < 0) {
- PRINT_FCALL_ERROR("clone error", fcall);
- v9fs_put_idpool(wfidno, &v9ses->fidpool);
- wfidno = -1;
- goto CleanUpFid;
+ err = v9fs_t_walk(v9ses, fid, nfid, (char *) dentry->d_name.name,
+ &fcall);
+
+ if (err < 0) {
+ PRINT_FCALL_ERROR("walk error", fcall);
+ v9fs_put_idpool(nfid, &v9ses->fidpool);
+ goto error;
}
+
kfree(fcall);
fcall = NULL;
+ ret = v9fs_fid_create(v9ses, nfid);
+ if (!ret) {
+ err = -ENOMEM;
+ goto clunk_fid;
+ }
- if (!v9fs_fid_create(file_dentry, v9ses, wfidno, 0)) {
- v9fs_put_idpool(wfidno, &v9ses->fidpool);
-
- goto CleanUpFid;
+ err = v9fs_fid_insert(ret, dentry);
+ if (err < 0) {
+ v9fs_fid_destroy(ret);
+ goto clunk_fid;
}
- if ((perm & V9FS_DMSYMLINK) || (perm & V9FS_DMLINK) ||
- (perm & V9FS_DMNAMEDPIPE) || (perm & V9FS_DMSOCKET) ||
- (perm & V9FS_DMDEVICE))
- return 0;
+ return ret;
- result = v9fs_t_stat(v9ses, wfidno, &fcall);
- if (result < 0) {
- PRINT_FCALL_ERROR("stat error", fcall);
- goto CleanUpFid;
- }
+clunk_fid:
+ v9fs_t_clunk(v9ses, nfid);
+error:
+ kfree(fcall);
+ return ERR_PTR(err);
+}
- file_inode = v9fs_get_inode(sb,
- p9mode2unixmode(v9ses, fcall->params.rstat.stat.mode));
+struct inode *
+v9fs_inode_from_fid(struct v9fs_session_info *v9ses, u32 fid,
+ struct super_block *sb)
+{
+ int err, umode;
+ struct inode *ret;
+ struct v9fs_fcall *fcall;
- if ((!file_inode) || IS_ERR(file_inode)) {
- dprintk(DEBUG_ERROR, "create inode failed\n");
- result = -EBADF;
- goto CleanUpFid;
+ ret = NULL;
+ err = v9fs_t_stat(v9ses, fid, &fcall);
+ if (err) {
+ PRINT_FCALL_ERROR("stat error", fcall);
+ goto error;
}
- v9fs_stat2inode(&fcall->params.rstat.stat, file_inode, sb);
- kfree(fcall);
- fcall = NULL;
- file_dentry->d_op = &v9fs_dentry_operations;
- d_instantiate(file_dentry, file_inode);
+ umode = p9mode2unixmode(v9ses, fcall->params.rstat.stat.mode);
+ ret = v9fs_get_inode(sb, umode);
+ if (IS_ERR(ret)) {
+ err = PTR_ERR(ret);
+ ret = NULL;
+ goto error;
+ }
- return 0;
+ v9fs_stat2inode(&fcall->params.rstat.stat, ret, sb);
+ kfree(fcall);
+ return ret;
- CleanUpFid:
+error:
kfree(fcall);
- fcall = NULL;
+ if (ret)
+ iput(ret);
- if (newfid >= 0) {
- err = v9fs_t_clunk(v9ses, newfid);
- if (err < 0)
- dprintk(DEBUG_ERROR, "clunk failed: %d\n", err);
- }
- if (wfidno >= 0) {
- err = v9fs_t_clunk(v9ses, wfidno);
- if (err < 0)
- dprintk(DEBUG_ERROR, "clunk failed: %d\n", err);
- }
- return result;
+ return ERR_PTR(err);
}
/**
return result;
}
+static int
+v9fs_open_created(struct inode *inode, struct file *file)
+{
+ return 0;
+}
+
/**
* v9fs_vfs_create - VFS hook to create files
* @inode: directory inode that is being deleted
* @dentry: dentry that is being deleted
- * @perm: create permissions
+ * @mode: create permissions
* @nd: path information
*
*/
static int
-v9fs_vfs_create(struct inode *inode, struct dentry *dentry, int perm,
+v9fs_vfs_create(struct inode *dir, struct dentry *dentry, int mode,
struct nameidata *nd)
{
- return v9fs_create(inode, dentry, perm, O_RDWR);
+ int err;
+ u32 fid, perm, iounit;
+ int flags;
+ struct v9fs_session_info *v9ses;
+ struct v9fs_fid *dfid, *vfid, *ffid;
+ struct inode *inode;
+ struct v9fs_qid qid;
+ struct file *filp;
+
+ inode = NULL;
+ vfid = NULL;
+ v9ses = v9fs_inode2v9ses(dir);
+ dfid = v9fs_fid_lookup(dentry->d_parent);
+ perm = unixmode2p9mode(v9ses, mode);
+
+ if (nd && nd->flags & LOOKUP_OPEN)
+ flags = nd->intent.open.flags - 1;
+ else
+ flags = O_RDWR;
+
+ err = v9fs_create(v9ses, dfid->fid, (char *) dentry->d_name.name,
+ perm, v9fs_uflags2omode(flags), &fid, &qid, &iounit);
+
+ if (err)
+ goto error;
+
+ vfid = v9fs_clone_walk(v9ses, dfid->fid, dentry);
+ if (IS_ERR(vfid)) {
+ err = PTR_ERR(vfid);
+ vfid = NULL;
+ goto error;
+ }
+
+ inode = v9fs_inode_from_fid(v9ses, vfid->fid, dir->i_sb);
+ if (IS_ERR(inode)) {
+ err = PTR_ERR(inode);
+ inode = NULL;
+ goto error;
+ }
+
+ dentry->d_op = &v9fs_dentry_operations;
+ d_instantiate(dentry, inode);
+
+ if (nd && nd->flags & LOOKUP_OPEN) {
+ ffid = v9fs_fid_create(v9ses, fid);
+ if (!ffid)
+ return -ENOMEM;
+
+ filp = lookup_instantiate_filp(nd, dentry, v9fs_open_created);
+ if (IS_ERR(filp)) {
+ v9fs_fid_destroy(ffid);
+ return PTR_ERR(filp);
+ }
+
+ ffid->rdir_pos = 0;
+ ffid->rdir_fcall = NULL;
+ ffid->fidopen = 1;
+ ffid->iounit = iounit;
+ ffid->filp = filp;
+ filp->private_data = ffid;
+ }
+
+ return 0;
+
+error:
+ if (vfid)
+ v9fs_fid_destroy(vfid);
+
+ if (inode)
+ iput(inode);
+
+ return err;
}
/**
*
*/
-static int v9fs_vfs_mkdir(struct inode *inode, struct dentry *dentry, int mode)
+static int v9fs_vfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
{
- return v9fs_create(inode, dentry, mode | S_IFDIR, O_RDONLY);
+ int err;
+ u32 fid, perm;
+ struct v9fs_session_info *v9ses;
+ struct v9fs_fid *dfid, *vfid;
+ struct inode *inode;
+
+ inode = NULL;
+ vfid = NULL;
+ v9ses = v9fs_inode2v9ses(dir);
+ dfid = v9fs_fid_lookup(dentry->d_parent);
+ perm = unixmode2p9mode(v9ses, mode | S_IFDIR);
+
+ err = v9fs_create(v9ses, dfid->fid, (char *) dentry->d_name.name,
+ perm, V9FS_OREAD, &fid, NULL, NULL);
+
+ if (err) {
+ dprintk(DEBUG_ERROR, "create error %d\n", err);
+ goto error;
+ }
+
+ err = v9fs_t_clunk(v9ses, fid);
+ if (err) {
+ dprintk(DEBUG_ERROR, "clunk error %d\n", err);
+ goto error;
+ }
+
+ vfid = v9fs_clone_walk(v9ses, dfid->fid, dentry);
+ if (IS_ERR(vfid)) {
+ err = PTR_ERR(vfid);
+ vfid = NULL;
+ goto error;
+ }
+
+ inode = v9fs_inode_from_fid(v9ses, vfid->fid, dir->i_sb);
+ if (IS_ERR(inode)) {
+ err = PTR_ERR(inode);
+ inode = NULL;
+ goto error;
+ }
+
+ dentry->d_op = &v9fs_dentry_operations;
+ d_instantiate(dentry, inode);
+ return 0;
+
+error:
+ if (vfid)
+ v9fs_fid_destroy(vfid);
+
+ return err;
}
/**
int result = 0;
dprintk(DEBUG_VFS, "dir: %p dentry: (%s) %p nameidata: %p\n",
- dir, dentry->d_iname, dentry, nameidata);
+ dir, dentry->d_name.name, dentry, nameidata);
sb = dir->i_sb;
v9ses = v9fs_inode2v9ses(dir);
return ERR_PTR(-ENOSPC);
}
- result =
- v9fs_t_walk(v9ses, dirfidnum, newfid, (char *)dentry->d_name.name,
- NULL);
+ result = v9fs_t_walk(v9ses, dirfidnum, newfid,
+ (char *)dentry->d_name.name, NULL);
if (result < 0) {
v9fs_put_idpool(newfid, &v9ses->fidpool);
if (result == -ENOENT) {
inode->i_ino = v9fs_qid2ino(&fcall->params.rstat.stat.qid);
- fid = v9fs_fid_create(dentry, v9ses, newfid, 0);
+ fid = v9fs_fid_create(v9ses, newfid);
if (fid == NULL) {
dprintk(DEBUG_ERROR, "couldn't insert\n");
result = -ENOMEM;
goto FreeFcall;
}
+ result = v9fs_fid_insert(fid, dentry);
+ if (result < 0)
+ goto FreeFcall;
+
fid->qid = fcall->params.rstat.stat.qid;
dentry->d_op = &v9fs_dentry_operations;
}
/* copy extension buffer into buffer */
- if (fcall->params.rstat.stat.extension.len+1 < buflen)
- buflen = fcall->params.rstat.stat.extension.len + 1;
+ if (fcall->params.rstat.stat.extension.len < buflen)
+ buflen = fcall->params.rstat.stat.extension.len;
memcpy(buffer, fcall->params.rstat.stat.extension.str, buflen - 1);
buffer[buflen-1] = 0;
if (!link)
link = ERR_PTR(-ENOMEM);
else {
- len = v9fs_readlink(dentry, link, PATH_MAX);
+ len = v9fs_readlink(dentry, link, strlen(link));
if (len < 0) {
__putname(link);
static int v9fs_vfs_mkspecial(struct inode *dir, struct dentry *dentry,
int mode, const char *extension)
{
- int err, retval;
+ int err;
+ u32 fid, perm;
struct v9fs_session_info *v9ses;
+ struct v9fs_fid *dfid, *vfid;
+ struct inode *inode;
struct v9fs_fcall *fcall;
- struct v9fs_fid *fid;
struct v9fs_wstat wstat;
- v9ses = v9fs_inode2v9ses(dir);
- retval = -EPERM;
fcall = NULL;
+ inode = NULL;
+ vfid = NULL;
+ v9ses = v9fs_inode2v9ses(dir);
+ dfid = v9fs_fid_lookup(dentry->d_parent);
+ perm = unixmode2p9mode(v9ses, mode);
if (!v9ses->extended) {
dprintk(DEBUG_ERROR, "not extended\n");
- goto free_mem;
+ return -EPERM;
}
- /* issue a create */
- retval = v9fs_create(dir, dentry, mode, 0);
- if (retval != 0)
- goto free_mem;
+ err = v9fs_create(v9ses, dfid->fid, (char *) dentry->d_name.name,
+ perm, V9FS_OREAD, &fid, NULL, NULL);
- fid = v9fs_fid_get_created(dentry);
- if (!fid) {
- dprintk(DEBUG_ERROR, "couldn't resolve fid from dentry\n");
- goto free_mem;
+ if (err)
+ goto error;
+
+ err = v9fs_t_clunk(v9ses, fid);
+ if (err)
+ goto error;
+
+ vfid = v9fs_clone_walk(v9ses, dfid->fid, dentry);
+ if (IS_ERR(vfid)) {
+ err = PTR_ERR(vfid);
+ vfid = NULL;
+ goto error;
+ }
+
+ inode = v9fs_inode_from_fid(v9ses, vfid->fid, dir->i_sb);
+ if (IS_ERR(inode)) {
+ err = PTR_ERR(inode);
+ inode = NULL;
+ goto error;
}
/* issue a Twstat */
v9fs_blank_wstat(&wstat);
wstat.muid = v9ses->name;
wstat.extension = (char *) extension;
- retval = v9fs_t_wstat(v9ses, fid->fid, &wstat, &fcall);
- if (retval < 0) {
- PRINT_FCALL_ERROR("wstat error", fcall);
- goto free_mem;
- }
-
- err = v9fs_t_clunk(v9ses, fid->fid);
+ err = v9fs_t_wstat(v9ses, vfid->fid, &wstat, &fcall);
if (err < 0) {
- dprintk(DEBUG_ERROR, "clunk failed: %d\n", err);
- goto free_mem;
+ PRINT_FCALL_ERROR("wstat error", fcall);
+ goto error;
}
- d_drop(dentry); /* FID - will this also clunk? */
+ kfree(fcall);
+ dentry->d_op = &v9fs_dentry_operations;
+ d_instantiate(dentry, inode);
+ return 0;
-free_mem:
+error:
kfree(fcall);
- return retval;
+ if (vfid)
+ v9fs_fid_destroy(vfid);
+
+ if (inode)
+ iput(inode);
+
+ return err;
+
}
/**
inode->i_gid = gid;
root = d_alloc_root(inode);
-
if (!root) {
retval = -ENOMEM;
goto put_back_sb;
if (stat_result < 0) {
dprintk(DEBUG_ERROR, "stat error\n");
v9fs_t_clunk(v9ses, newfid);
- v9fs_put_idpool(newfid, &v9ses->fidpool);
} else {
/* Setup the Root Inode */
- root_fid = v9fs_fid_create(root, v9ses, newfid, 0);
+ root_fid = v9fs_fid_create(v9ses, newfid);
if (root_fid == NULL) {
retval = -ENOMEM;
goto put_back_sb;
}
+ retval = v9fs_fid_insert(root_fid, root);
+ if (retval < 0) {
+ kfree(fcall);
+ goto put_back_sb;
+ }
+
root_fid->qid = fcall->params.rstat.stat.qid;
root->d_inode->i_ino =
v9fs_qid2ino(&fcall->params.rstat.stat.qid);
int * /* type of buf returned */ , const int long_op);
extern int checkSMBhdr(struct smb_hdr *smb, __u16 mid);
extern int checkSMB(struct smb_hdr *smb, __u16 mid, int length);
-extern int is_valid_oplock_break(struct smb_hdr *smb);
+extern int is_valid_oplock_break(struct smb_hdr *smb, struct TCP_Server_Info *);
extern int is_size_safe_to_change(struct cifsInodeInfo *);
extern struct cifsFileInfo *find_writable_file(struct cifsInodeInfo *);
extern unsigned int smbCalcSize(struct smb_hdr *ptr);
smallbuf = NULL;
}
wake_up_process(task_to_wake);
- } else if ((is_valid_oplock_break(smb_buffer) == FALSE)
+ } else if ((is_valid_oplock_break(smb_buffer, server) == FALSE)
&& (isMultiRsp == FALSE)) {
cERROR(1, ("No task to wake, unknown frame rcvd!"));
cifs_dump_mem("Received Data is: ",(char *)smb_buffer,
return 0;
}
int
-is_valid_oplock_break(struct smb_hdr *buf)
+is_valid_oplock_break(struct smb_hdr *buf, struct TCP_Server_Info *srv)
{
struct smb_com_lock_req * pSMB = (struct smb_com_lock_req *)buf;
struct list_head *tmp;
read_lock(&GlobalSMBSeslock);
list_for_each(tmp, &GlobalTreeConnectionList) {
tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList);
- if (tcon->tid == buf->Tid) {
+ if ((tcon->tid == buf->Tid) && (srv == tcon->ses->server)) {
cifs_stats_inc(&tcon->num_oplock_brks);
list_for_each(tmp1,&tcon->openFileList){
netfile = list_entry(tmp1,struct cifsFileInfo,
ifr = ifc.ifc_req;
ifr32 = compat_ptr(ifc32.ifcbuf);
for (i = 0, j = 0;
- i + sizeof (struct ifreq32) < ifc32.ifc_len && j < ifc.ifc_len;
+ i + sizeof (struct ifreq32) <= ifc32.ifc_len && j < ifc.ifc_len;
i += sizeof (struct ifreq32), j += sizeof (struct ifreq)) {
if (copy_in_user(ifr32, ifr, sizeof (struct ifreq32)))
return -EFAULT;
/* These two macros may change in future, to provide better st_ino
semantics. */
-#define CRAMINO(x) ((x)->offset?(x)->offset<<2:1)
+#define CRAMINO(x) (((x)->offset && (x)->size)?(x)->offset<<2:1)
#define OFFSET(x) ((x)->i_ino)
static int cramfs_iget5_set(struct inode *inode, void *opaque)
{
+ static struct timespec zerotime;
struct cramfs_inode *cramfs_inode = opaque;
+ inode->i_mode = cramfs_inode->mode;
+ inode->i_uid = cramfs_inode->uid;
+ inode->i_size = cramfs_inode->size;
+ inode->i_blocks = (cramfs_inode->size - 1) / 512 + 1;
+ inode->i_blksize = PAGE_CACHE_SIZE;
+ inode->i_gid = cramfs_inode->gid;
+ /* Struct copy intentional */
+ inode->i_mtime = inode->i_atime = inode->i_ctime = zerotime;
inode->i_ino = CRAMINO(cramfs_inode);
+ /* inode->i_nlink is left 1 - arguably wrong for directories,
+ but it's the best we can do without reading the directory
+ contents. 1 yields the right result in GNU find, even
+ without -noleaf option. */
+ if (S_ISREG(inode->i_mode)) {
+ inode->i_fop = &generic_ro_fops;
+ inode->i_data.a_ops = &cramfs_aops;
+ } else if (S_ISDIR(inode->i_mode)) {
+ inode->i_op = &cramfs_dir_inode_operations;
+ inode->i_fop = &cramfs_directory_operations;
+ } else if (S_ISLNK(inode->i_mode)) {
+ inode->i_op = &page_symlink_inode_operations;
+ inode->i_data.a_ops = &cramfs_aops;
+ } else {
+ inode->i_size = 0;
+ inode->i_blocks = 0;
+ init_special_inode(inode, inode->i_mode,
+ old_decode_dev(cramfs_inode->size));
+ }
return 0;
}
struct inode *inode = iget5_locked(sb, CRAMINO(cramfs_inode),
cramfs_iget5_test, cramfs_iget5_set,
cramfs_inode);
- static struct timespec zerotime;
-
if (inode && (inode->i_state & I_NEW)) {
- inode->i_mode = cramfs_inode->mode;
- inode->i_uid = cramfs_inode->uid;
- inode->i_size = cramfs_inode->size;
- inode->i_blocks = (cramfs_inode->size - 1) / 512 + 1;
- inode->i_blksize = PAGE_CACHE_SIZE;
- inode->i_gid = cramfs_inode->gid;
- /* Struct copy intentional */
- inode->i_mtime = inode->i_atime = inode->i_ctime = zerotime;
- inode->i_ino = CRAMINO(cramfs_inode);
- /* inode->i_nlink is left 1 - arguably wrong for directories,
- but it's the best we can do without reading the directory
- contents. 1 yields the right result in GNU find, even
- without -noleaf option. */
- if (S_ISREG(inode->i_mode)) {
- inode->i_fop = &generic_ro_fops;
- inode->i_data.a_ops = &cramfs_aops;
- } else if (S_ISDIR(inode->i_mode)) {
- inode->i_op = &cramfs_dir_inode_operations;
- inode->i_fop = &cramfs_directory_operations;
- } else if (S_ISLNK(inode->i_mode)) {
- inode->i_op = &page_symlink_inode_operations;
- inode->i_data.a_ops = &cramfs_aops;
- } else {
- inode->i_size = 0;
- inode->i_blocks = 0;
- init_special_inode(inode, inode->i_mode,
- old_decode_dev(cramfs_inode->size));
- }
unlock_new_inode(inode);
}
return inode;
SLAB_HWCACHE_ALIGN|SLAB_PANIC, NULL, NULL);
filp_cachep = kmem_cache_create("filp", sizeof(struct file), 0,
- SLAB_HWCACHE_ALIGN|SLAB_PANIC, filp_ctor, filp_dtor);
+ SLAB_HWCACHE_ALIGN|SLAB_PANIC, NULL, NULL);
dcache_init(mempages);
inode_init(mempages);
current->flags &= ~PF_RANDOMIZE;
flush_thread();
+ /* Set the new mm task size. We have to do that late because it may
+ * depend on TIF_32BIT which is only updated in flush_thread() on
+ * some architectures like powerpc
+ */
+ current->mm->task_size = TASK_SIZE;
+
if (bprm->e_uid != current->euid || bprm->e_gid != current->egid ||
file_permission(bprm->file, MAY_READ) ||
(bprm->interp_flags & BINPRM_FLAGS_ENFORCE_NONDUMP)) {
* For "nobh" option, we can only work if we don't need to
* read-in the page - otherwise we create buffers to do the IO.
*/
- if (!page_has_buffers(page) && test_opt(inode->i_sb, NOBH)) {
- if (PageUptodate(page)) {
- kaddr = kmap_atomic(page, KM_USER0);
- memset(kaddr + offset, 0, length);
- flush_dcache_page(page);
- kunmap_atomic(kaddr, KM_USER0);
- set_page_dirty(page);
- goto unlock;
- }
+ if (!page_has_buffers(page) && test_opt(inode->i_sb, NOBH) &&
+ ext3_should_writeback_data(inode) && PageUptodate(page)) {
+ kaddr = kmap_atomic(page, KM_USER0);
+ memset(kaddr + offset, 0, length);
+ flush_dcache_page(page);
+ kunmap_atomic(kaddr, KM_USER0);
+ set_page_dirty(page);
+ goto unlock;
}
if (!page_has_buffers(page))
* We have a transaction open. All is sweetness. It also sets
* i_size in generic_commit_write().
*/
- err = page_symlink(inode, symname, l);
+ err = __page_symlink(inode, symname, l,
+ mapping_gfp_mask(inode->i_mapping) & ~__GFP_FS);
if (err) {
ext3_dec_count(handle, inode);
ext3_mark_inode_dirty(handle, inode);
{
int ret;
- ret = -ERESTARTSYS;
- if (mutex_lock_interruptible(PIPE_MUTEX(*inode)))
- goto err_nolock_nocleanup;
-
+ mutex_lock(PIPE_MUTEX(*inode));
if (!inode->i_pipe) {
ret = -ENOMEM;
if(!pipe_new(inode))
err_nocleanup:
mutex_unlock(PIPE_MUTEX(*inode));
-
-err_nolock_nocleanup:
return ret;
}
* Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
*/
+#include <linux/config.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/file.h>
#include <linux/capability.h>
#include <linux/cdev.h>
#include <linux/fsnotify.h>
+#include <linux/sysctl.h>
+#include <linux/percpu_counter.h>
+
+#include <asm/atomic.h>
/* sysctl tunables... */
struct files_stat_struct files_stat = {
.max_files = NR_FILE
};
-EXPORT_SYMBOL(files_stat); /* Needed by unix.o */
-
/* public. Not pretty! */
- __cacheline_aligned_in_smp DEFINE_SPINLOCK(files_lock);
+__cacheline_aligned_in_smp DEFINE_SPINLOCK(files_lock);
-static DEFINE_SPINLOCK(filp_count_lock);
+static struct percpu_counter nr_files __cacheline_aligned_in_smp;
-/* slab constructors and destructors are called from arbitrary
- * context and must be fully threaded - use a local spinlock
- * to protect files_stat.nr_files
- */
-void filp_ctor(void *objp, struct kmem_cache *cachep, unsigned long cflags)
+static inline void file_free_rcu(struct rcu_head *head)
{
- if ((cflags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR) {
- unsigned long flags;
- spin_lock_irqsave(&filp_count_lock, flags);
- files_stat.nr_files++;
- spin_unlock_irqrestore(&filp_count_lock, flags);
- }
+ struct file *f = container_of(head, struct file, f_u.fu_rcuhead);
+ kmem_cache_free(filp_cachep, f);
}
-void filp_dtor(void *objp, struct kmem_cache *cachep, unsigned long dflags)
+static inline void file_free(struct file *f)
{
- unsigned long flags;
- spin_lock_irqsave(&filp_count_lock, flags);
- files_stat.nr_files--;
- spin_unlock_irqrestore(&filp_count_lock, flags);
+ percpu_counter_dec(&nr_files);
+ call_rcu(&f->f_u.fu_rcuhead, file_free_rcu);
}
-static inline void file_free_rcu(struct rcu_head *head)
+/*
+ * Return the total number of open files in the system
+ */
+static int get_nr_files(void)
{
- struct file *f = container_of(head, struct file, f_u.fu_rcuhead);
- kmem_cache_free(filp_cachep, f);
+ return percpu_counter_read_positive(&nr_files);
}
-static inline void file_free(struct file *f)
+/*
+ * Return the maximum number of open files in the system
+ */
+int get_max_files(void)
{
- call_rcu(&f->f_u.fu_rcuhead, file_free_rcu);
+ return files_stat.max_files;
}
+EXPORT_SYMBOL_GPL(get_max_files);
+
+/*
+ * Handle nr_files sysctl
+ */
+#if defined(CONFIG_SYSCTL) && defined(CONFIG_PROC_FS)
+int proc_nr_files(ctl_table *table, int write, struct file *filp,
+ void __user *buffer, size_t *lenp, loff_t *ppos)
+{
+ files_stat.nr_files = get_nr_files();
+ return proc_dointvec(table, write, filp, buffer, lenp, ppos);
+}
+#else
+int proc_nr_files(ctl_table *table, int write, struct file *filp,
+ void __user *buffer, size_t *lenp, loff_t *ppos)
+{
+ return -ENOSYS;
+}
+#endif
/* Find an unused file structure and return a pointer to it.
* Returns NULL, if there are no more free file structures or
/*
* Privileged users can go above max_files
*/
- if (files_stat.nr_files >= files_stat.max_files &&
- !capable(CAP_SYS_ADMIN))
- goto over;
+ if (get_nr_files() >= files_stat.max_files && !capable(CAP_SYS_ADMIN)) {
+ /*
+ * percpu_counters are inaccurate. Do an expensive check before
+ * we go and fail.
+ */
+ if (percpu_counter_sum(&nr_files) >= files_stat.max_files)
+ goto over;
+ }
f = kmem_cache_alloc(filp_cachep, GFP_KERNEL);
if (f == NULL)
goto fail;
+ percpu_counter_inc(&nr_files);
memset(f, 0, sizeof(*f));
if (security_file_alloc(f))
goto fail_sec;
over:
/* Ran out of filps - report that */
- if (files_stat.nr_files > old_max) {
+ if (get_nr_files() > old_max) {
printk(KERN_INFO "VFS: file-max limit %d reached\n",
- files_stat.max_files);
- old_max = files_stat.nr_files;
+ get_max_files());
+ old_max = get_nr_files();
}
goto fail;
if (files_stat.max_files < NR_FILE)
files_stat.max_files = NR_FILE;
files_defer_init();
+ percpu_counter_init(&nr_files);
}
/* Doesn't hurt to "reset" the validity timeout */
fuse_invalidate_entry_cache(entry);
+
+ /* For negative dentries, always do a fresh lookup */
if (!inode)
return 0;
fuse_lookup_init(req, entry->d_parent->d_inode, entry, &outarg);
request_send(fc, req);
err = req->out.h.error;
+ /* Zero nodeid is same as -ENOENT */
+ if (!err && !outarg.nodeid)
+ err = -ENOENT;
if (!err) {
struct fuse_inode *fi = get_fuse_inode(inode);
if (outarg.nodeid != get_node_id(inode)) {
fuse_lookup_init(req, dir, entry, &outarg);
request_send(fc, req);
err = req->out.h.error;
- if (!err && ((outarg.nodeid && invalid_nodeid(outarg.nodeid)) ||
- !valid_mode(outarg.attr.mode)))
+ /* Zero nodeid is same as -ENOENT, but with valid timeout */
+ if (!err && outarg.nodeid &&
+ (invalid_nodeid(outarg.nodeid) || !valid_mode(outarg.attr.mode)))
err = -EIO;
if (!err && outarg.nodeid) {
inode = fuse_iget(dir->i_sb, outarg.nodeid, outarg.generation,
int err = 0, pointed = 0;
struct jffs2_eraseblock *jeb;
unsigned char *buffer;
- uint32_t crc, ofs, retlen, len;
+ uint32_t crc, ofs, len;
+ size_t retlen;
BUG_ON(tn->csize == 0);
* negative error code on failure.
*/
static inline int read_direntry(struct jffs2_sb_info *c, struct jffs2_raw_node_ref *ref,
- struct jffs2_raw_dirent *rd, uint32_t read, struct jffs2_full_dirent **fdp,
+ struct jffs2_raw_dirent *rd, size_t read, struct jffs2_full_dirent **fdp,
uint32_t *latest_mctime, uint32_t *mctime_ver)
{
struct jffs2_full_dirent *fd;
c->nextblock->dirty_size = 0;
}
#ifdef CONFIG_JFFS2_FS_WRITEBUFFER
- if (!jffs2_can_mark_obsolete(c) && c->nextblock && (c->nextblock->free_size % c->wbuf_pagesize)) {
+ if (!jffs2_can_mark_obsolete(c) && c->wbuf_pagesize && c->nextblock && (c->nextblock->free_size % c->wbuf_pagesize)) {
/* If we're going to start writing into a block which already
contains data, and the end of the data isn't page-aligned,
skip a little and align it. */
* reclaimed while we're stuck in the unlock call. */
fl->fl_u.nfs_fl.flags &= ~NFS_LCK_GRANTED;
+ /*
+ * Note: the server is supposed to either grant us the unlock
+ * request, or to deny it with NLM_LCK_DENIED_GRACE_PERIOD. In either
+ * case, we want to unlock.
+ */
+ do_vfs_lock(fl);
+
if (req->a_flags & RPC_TASK_ASYNC) {
status = nlmclnt_async_call(req, NLMPROC_UNLOCK,
&nlmclnt_unlock_ops);
/* Hrmf... Do the unlock early since locks_remove_posix()
* really expects us to free the lock synchronously */
- do_vfs_lock(fl);
if (status < 0) {
nlmclnt_release_lockargs(req);
kfree(req);
if (status < 0)
return status;
- do_vfs_lock(fl);
if (resp->status == NLM_LCK_GRANTED)
return 0;
}
}
-int page_symlink(struct inode *inode, const char *symname, int len)
+int __page_symlink(struct inode *inode, const char *symname, int len,
+ gfp_t gfp_mask)
{
struct address_space *mapping = inode->i_mapping;
- struct page *page = grab_cache_page(mapping, 0);
+ struct page *page;
int err = -ENOMEM;
char *kaddr;
+ page = find_or_create_page(mapping, 0, gfp_mask);
if (!page)
goto fail;
err = mapping->a_ops->prepare_write(NULL, page, 0, len-1);
return err;
}
+int page_symlink(struct inode *inode, const char *symname, int len)
+{
+ return __page_symlink(inode, symname, len,
+ mapping_gfp_mask(inode->i_mapping));
+}
+
struct inode_operations page_symlink_inode_operations = {
.readlink = generic_readlink,
.follow_link = page_follow_link_light,
EXPORT_SYMBOL(page_follow_link_light);
EXPORT_SYMBOL(page_put_link);
EXPORT_SYMBOL(page_readlink);
+EXPORT_SYMBOL(__page_symlink);
EXPORT_SYMBOL(page_symlink);
EXPORT_SYMBOL(page_symlink_inode_operations);
EXPORT_SYMBOL(path_lookup);
#define NFSDBG_FACILITY NFSDBG_VFS
#define MAX_DIRECTIO_SIZE (4096UL << PAGE_SHIFT)
+static void nfs_free_user_pages(struct page **pages, int npages, int do_dirty);
static kmem_cache_t *nfs_direct_cachep;
/*
page_count, (rw == READ), 0,
*pages, NULL);
up_read(¤t->mm->mmap_sem);
+ /*
+ * If we got fewer pages than expected from get_user_pages(),
+ * the user buffer runs off the end of a mapping; return EFAULT.
+ */
+ if (result >= 0 && result < page_count) {
+ nfs_free_user_pages(*pages, result, 0);
+ *pages = NULL;
+ result = -EFAULT;
+ }
}
return result;
}
if (status == 0)
status = nfs4_do_fsinfo(server, fhandle, info);
out:
- return status;
+ return nfs4_map_errors(status);
}
static int _nfs4_proc_getattr(struct nfs_server *server, struct nfs_fh *fhandle, struct nfs_fattr *fattr)
#define define_mask(_name) { \
.attr = { \
.name = #_name, \
+ .owner = THIS_MODULE, \
.mode = S_IRUGO | S_IWUSR, \
}, \
.mask = ML_##_name, \
} \
} while (0)
-#if (BITS_PER_LONG == 32) || defined(CONFIG_X86_64)
+#if (BITS_PER_LONG == 32) || defined(CONFIG_X86_64) || (defined(CONFIG_UML_X86) && defined(CONFIG_64BIT))
#define MLFi64 "lld"
#define MLFu64 "llu"
#define MLFx64 "llx"
if (!ocfs2_table_header) {
printk(KERN_ERR "nodemanager: unable to register sysctl\n");
ret = -ENOMEM; /* or something. */
- goto out;
+ goto out_o2net;
}
ret = o2net_register_hb_callbacks();
o2net_unregister_hb_callbacks();
out_sysctl:
unregister_sysctl_table(ocfs2_table_header);
+out_o2net:
+ o2net_exit();
out:
return ret;
}
{
struct o2net_node *nn = arg;
struct o2net_sock_container *sc = NULL;
- struct o2nm_node *node = NULL;
+ struct o2nm_node *node = NULL, *mynode = NULL;
struct socket *sock = NULL;
struct sockaddr_in myaddr = {0, }, remoteaddr = {0, };
int ret = 0;
goto out;
}
+ mynode = o2nm_get_node_by_num(o2nm_this_node());
+ if (mynode == NULL) {
+ ret = 0;
+ goto out;
+ }
+
spin_lock(&nn->nn_lock);
/* see if we already have one pending or have given up */
if (nn->nn_sc || nn->nn_persistent_error)
sock->sk->sk_allocation = GFP_ATOMIC;
myaddr.sin_family = AF_INET;
+ myaddr.sin_addr.s_addr = (__force u32)mynode->nd_ipv4_address;
myaddr.sin_port = (__force u16)htons(0); /* any port */
ret = sock->ops->bind(sock, (struct sockaddr *)&myaddr,
sizeof(myaddr));
if (ret) {
- mlog(0, "bind failed: %d\n", ret);
+ mlog(ML_ERROR, "bind failed with %d at address %u.%u.%u.%u\n",
+ ret, NIPQUAD(mynode->nd_ipv4_address));
goto out;
}
sc_put(sc);
if (node)
o2nm_node_put(node);
+ if (mynode)
+ o2nm_node_put(mynode);
return;
}
O2NET_DRIVER_READY,
};
-int o2net_init_tcp_sock(struct inode *inode);
int o2net_send_message(u32 msg_type, u32 key, void *data, u32 len,
u8 target_node, int *status);
int o2net_send_message_vec(u32 msg_type, u32 key, struct kvec *vec,
size_t veclen, u8 target_node, int *status);
-int o2net_broadcast_message(u32 msg_type, u32 key, void *data, u32 len,
- struct inode *group);
int o2net_register_handler(u32 msg_type, u32 key, u32 max_len,
o2net_msg_handler_func *func, void *data,
int o2net_init(void);
void o2net_exit(void);
-int o2net_proc_init(struct proc_dir_entry *parent);
-void o2net_proc_exit(struct proc_dir_entry *parent);
#endif /* O2CLUSTER_TCP_H */
#define DLM_THREAD_SHUFFLE_INTERVAL 5 // flush everything every 5 passes
#define DLM_THREAD_MS 200 // flush at least every 200 ms
-#define DLM_HASH_BITS 7
-#define DLM_HASH_SIZE (1 << DLM_HASH_BITS)
-#define DLM_HASH_MASK (DLM_HASH_SIZE - 1)
+#define DLM_HASH_BUCKETS (PAGE_SIZE / sizeof(struct hlist_head))
enum dlm_ast_type {
DLM_AST = 0,
struct dlm_ctxt
{
struct list_head list;
- struct list_head *resources;
+ struct hlist_head *lockres_hash;
struct list_head dirty_list;
struct list_head purge_list;
struct list_head pending_asts;
{
/* WARNING: Please see the comment in dlm_init_lockres before
* adding fields here. */
- struct list_head list;
+ struct hlist_node hash_node;
struct kref refs;
/* please keep these next 3 in this order
void dlm_dump_lock_resources(struct dlm_ctxt *dlm)
{
struct dlm_lock_resource *res;
- struct list_head *iter;
- struct list_head *bucket;
+ struct hlist_node *iter;
+ struct hlist_head *bucket;
int i;
mlog(ML_NOTICE, "struct dlm_ctxt: %s, node=%u, key=%u\n",
}
spin_lock(&dlm->spinlock);
- for (i=0; i<DLM_HASH_SIZE; i++) {
- bucket = &(dlm->resources[i]);
- list_for_each(iter, bucket) {
- res = list_entry(iter, struct dlm_lock_resource, list);
+ for (i=0; i<DLM_HASH_BUCKETS; i++) {
+ bucket = &(dlm->lockres_hash[i]);
+ hlist_for_each_entry(res, iter, bucket, hash_node)
dlm_print_one_lock_resource(res);
- }
}
spin_unlock(&dlm->spinlock);
}
void __dlm_unhash_lockres(struct dlm_lock_resource *lockres)
{
- list_del_init(&lockres->list);
+ hlist_del_init(&lockres->hash_node);
dlm_lockres_put(lockres);
}
void __dlm_insert_lockres(struct dlm_ctxt *dlm,
struct dlm_lock_resource *res)
{
- struct list_head *bucket;
+ struct hlist_head *bucket;
struct qstr *q;
assert_spin_locked(&dlm->spinlock);
q = &res->lockname;
q->hash = full_name_hash(q->name, q->len);
- bucket = &(dlm->resources[q->hash & DLM_HASH_MASK]);
+ bucket = &(dlm->lockres_hash[q->hash % DLM_HASH_BUCKETS]);
/* get a reference for our hashtable */
dlm_lockres_get(res);
- list_add_tail(&res->list, bucket);
+ hlist_add_head(&res->hash_node, bucket);
}
struct dlm_lock_resource * __dlm_lookup_lockres(struct dlm_ctxt *dlm,
unsigned int len)
{
unsigned int hash;
- struct list_head *iter;
+ struct hlist_node *iter;
struct dlm_lock_resource *tmpres=NULL;
- struct list_head *bucket;
+ struct hlist_head *bucket;
mlog_entry("%.*s\n", len, name);
hash = full_name_hash(name, len);
- bucket = &(dlm->resources[hash & DLM_HASH_MASK]);
+ bucket = &(dlm->lockres_hash[hash % DLM_HASH_BUCKETS]);
/* check for pre-existing lock */
- list_for_each(iter, bucket) {
- tmpres = list_entry(iter, struct dlm_lock_resource, list);
+ hlist_for_each(iter, bucket) {
+ tmpres = hlist_entry(iter, struct dlm_lock_resource, hash_node);
if (tmpres->lockname.len == len &&
memcmp(tmpres->lockname.name, name, len) == 0) {
dlm_lockres_get(tmpres);
static void dlm_free_ctxt_mem(struct dlm_ctxt *dlm)
{
- if (dlm->resources)
- free_page((unsigned long) dlm->resources);
+ if (dlm->lockres_hash)
+ free_page((unsigned long) dlm->lockres_hash);
if (dlm->name)
kfree(dlm->name);
mlog(0, "Migrating locks from domain %s\n", dlm->name);
restart:
spin_lock(&dlm->spinlock);
- for (i=0; i<DLM_HASH_SIZE; i++) {
- while (!list_empty(&dlm->resources[i])) {
- res = list_entry(dlm->resources[i].next,
- struct dlm_lock_resource, list);
+ for (i = 0; i < DLM_HASH_BUCKETS; i++) {
+ while (!hlist_empty(&dlm->lockres_hash[i])) {
+ res = hlist_entry(dlm->lockres_hash[i].first,
+ struct dlm_lock_resource, hash_node);
/* need reference when manually grabbing lockres */
dlm_lockres_get(res);
/* this should unhash the lockres
goto leave;
}
- dlm->resources = (struct list_head *) __get_free_page(GFP_KERNEL);
- if (!dlm->resources) {
+ dlm->lockres_hash = (struct hlist_head *) __get_free_page(GFP_KERNEL);
+ if (!dlm->lockres_hash) {
mlog_errno(-ENOMEM);
kfree(dlm->name);
kfree(dlm);
dlm = NULL;
goto leave;
}
- memset(dlm->resources, 0, PAGE_SIZE);
- for (i=0; i<DLM_HASH_SIZE; i++)
- INIT_LIST_HEAD(&dlm->resources[i]);
+ for (i=0; i<DLM_HASH_BUCKETS; i++)
+ INIT_HLIST_HEAD(&dlm->lockres_hash[i]);
strcpy(dlm->name, domain);
dlm->key = key;
/* By the time we're ready to blow this guy away, we shouldn't
* be on any lists. */
- BUG_ON(!list_empty(&res->list));
+ BUG_ON(!hlist_unhashed(&res->hash_node));
BUG_ON(!list_empty(&res->granted));
BUG_ON(!list_empty(&res->converting));
BUG_ON(!list_empty(&res->blocked));
init_waitqueue_head(&res->wq);
spin_lock_init(&res->spinlock);
- INIT_LIST_HEAD(&res->list);
+ INIT_HLIST_NODE(&res->hash_node);
INIT_LIST_HEAD(&res->granted);
INIT_LIST_HEAD(&res->converting);
INIT_LIST_HEAD(&res->blocked);
u8 dead_node, u8 new_master)
{
int i;
- struct list_head *iter, *iter2, *bucket;
+ struct list_head *iter, *iter2;
+ struct hlist_node *hash_iter;
+ struct hlist_head *bucket;
+
struct dlm_lock_resource *res;
mlog_entry_void();
* for now we need to run the whole hash, clear
* the RECOVERING state and set the owner
* if necessary */
- for (i=0; i<DLM_HASH_SIZE; i++) {
- bucket = &(dlm->resources[i]);
- list_for_each(iter, bucket) {
- res = list_entry (iter, struct dlm_lock_resource, list);
+ for (i = 0; i < DLM_HASH_BUCKETS; i++) {
+ bucket = &(dlm->lockres_hash[i]);
+ hlist_for_each_entry(res, hash_iter, bucket, hash_node) {
if (res->state & DLM_LOCK_RES_RECOVERING) {
if (res->owner == dead_node) {
mlog(0, "(this=%u) res %.*s owner=%u "
static void dlm_do_local_recovery_cleanup(struct dlm_ctxt *dlm, u8 dead_node)
{
- struct list_head *iter;
+ struct hlist_node *iter;
struct dlm_lock_resource *res;
int i;
- struct list_head *bucket;
+ struct hlist_head *bucket;
struct dlm_lock *lock;
* can be kicked again to see if any ASTs or BASTs
* need to be fired as a result.
*/
- for (i=0; i<DLM_HASH_SIZE; i++) {
- bucket = &(dlm->resources[i]);
- list_for_each(iter, bucket) {
- res = list_entry (iter, struct dlm_lock_resource, list);
+ for (i = 0; i < DLM_HASH_BUCKETS; i++) {
+ bucket = &(dlm->lockres_hash[i]);
+ hlist_for_each_entry(res, iter, bucket, hash_node) {
/* always prune any $RECOVERY entries for dead nodes,
* otherwise hangs can occur during later recovery */
if (dlm_is_recovery_lock(res->lockname.name,
ret = -EBADR;
if (rec_end > OCFS2_I(inode)->ip_clusters) {
mlog_errno(ret);
+ ocfs2_error(inode->i_sb,
+ "Extent %d at e_blkno %"MLFu64" of inode %"MLFu64" goes past ip_clusters of %u\n",
+ i,
+ le64_to_cpu(rec->e_blkno),
+ OCFS2_I(inode)->ip_blkno,
+ OCFS2_I(inode)->ip_clusters);
goto out_free;
}
ret = -EBADR;
if (blkno) {
mlog_errno(ret);
+ ocfs2_error(inode->i_sb,
+ "Multiple extents for (cpos = %u, clusters = %u) on inode %"MLFu64"; e_blkno %"MLFu64" and rec %d at e_blkno %"MLFu64"\n",
+ cpos, clusters,
+ OCFS2_I(inode)->ip_blkno,
+ blkno, i,
+ le64_to_cpu(rec->e_blkno));
goto out_free;
}
*/
ret = -EBADR;
if (!blkno) {
+ ocfs2_error(inode->i_sb,
+ "No record found for (cpos = %u, clusters = %u) on inode %"MLFu64"\n",
+ cpos, clusters,
+ OCFS2_I(inode)->ip_blkno);
mlog_errno(ret);
goto out_free;
}
for (i = 0; i < le16_to_cpu(el->l_next_free_rec); i++) {
rec = &el->l_recs[i];
+
+ if ((le32_to_cpu(rec->e_cpos) + le32_to_cpu(rec->e_clusters)) >
+ OCFS2_I(inode)->ip_clusters) {
+ ret = -EBADR;
+ mlog_errno(ret);
+ ocfs2_error(inode->i_sb,
+ "Extent %d at e_blkno %"MLFu64" of inode %"MLFu64" goes past ip_clusters of %u\n",
+ i,
+ le64_to_cpu(rec->e_blkno),
+ OCFS2_I(inode)->ip_blkno,
+ OCFS2_I(inode)->ip_clusters);
+ return ret;
+ }
+
ret = ocfs2_extent_map_insert(inode, rec,
le16_to_cpu(el->l_tree_depth));
if (ret) {
OCFS2_I(inode)->ip_map.em_clusters) {
ret = -EBADR;
mlog_errno(ret);
+ ocfs2_error(inode->i_sb,
+ "Zero e_clusters on non-tail extent record at e_blkno %"MLFu64" on inode %"MLFu64"\n",
+ le64_to_cpu(rec->e_blkno),
+ OCFS2_I(inode)->ip_blkno);
return ret;
}
* Existing record in the extent map:
*
* cpos = 10, len = 10
- * |---------|
+ * |---------|
*
* New Record:
*
* cpos = 10, len = 20
- * |------------------|
+ * |------------------|
*
* The passed record is the new on-disk record. The new_clusters value
* is how many clusters were added to the file. If the append is a
struct file *filp = iocb->ki_filp;
struct inode *inode = filp->f_dentry->d_inode;
loff_t newsize, saved_pos;
-#ifdef OCFS2_ORACORE_WORKAROUNDS
- struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
-#endif
mlog_entry("(0x%p, 0x%p, %u, '%.*s')\n", filp, buf,
(unsigned int)count,
return -EIO;
}
-#ifdef OCFS2_ORACORE_WORKAROUNDS
- /* ugh, work around some applications which open everything O_DIRECT +
- * O_APPEND and really don't mean to use O_DIRECT. */
- if (osb->s_mount_opt & OCFS2_MOUNT_COMPAT_OCFS &&
- (filp->f_flags & O_APPEND) && (filp->f_flags & O_DIRECT))
- filp->f_flags &= ~O_DIRECT;
-#endif
-
mutex_lock(&inode->i_mutex);
/* to match setattr's i_mutex -> i_alloc_sem -> rw_lock ordering */
if (filp->f_flags & O_DIRECT) {
/* communicate with ocfs2_dio_end_io */
ocfs2_iocb_set_rw_locked(iocb);
-#ifdef OCFS2_ORACORE_WORKAROUNDS
- if (osb->s_mount_opt & OCFS2_MOUNT_COMPAT_OCFS &&
- filp->f_flags & O_DIRECT) {
- unsigned int saved_flags = filp->f_flags;
- int sector_size = 1 << osb->s_sectsize_bits;
-
- if ((saved_pos & (sector_size - 1)) ||
- (count & (sector_size - 1)) ||
- ((unsigned long)buf & (sector_size - 1))) {
- filp->f_flags |= O_SYNC;
- filp->f_flags &= ~O_DIRECT;
- }
-
- ret = generic_file_aio_write_nolock(iocb, &local_iov, 1,
- &iocb->ki_pos);
-
- filp->f_flags = saved_flags;
- } else
-#endif
- ret = generic_file_aio_write_nolock(iocb, &local_iov, 1,
- &iocb->ki_pos);
+ ret = generic_file_aio_write_nolock(iocb, &local_iov, 1, &iocb->ki_pos);
/* buffered aio wouldn't have proper lock coverage today */
BUG_ON(ret == -EIOCBQUEUED && !(filp->f_flags & O_DIRECT));
int ret = 0, rw_level = -1, have_alloc_sem = 0;
struct file *filp = iocb->ki_filp;
struct inode *inode = filp->f_dentry->d_inode;
-#ifdef OCFS2_ORACORE_WORKAROUNDS
- struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
-#endif
mlog_entry("(0x%p, 0x%p, %u, '%.*s')\n", filp, buf,
(unsigned int)count,
goto bail;
}
-#ifdef OCFS2_ORACORE_WORKAROUNDS
- if (osb->s_mount_opt & OCFS2_MOUNT_COMPAT_OCFS) {
- if (filp->f_flags & O_DIRECT) {
- int sector_size = 1 << osb->s_sectsize_bits;
-
- if ((pos & (sector_size - 1)) ||
- (count & (sector_size - 1)) ||
- ((unsigned long)buf & (sector_size - 1)) ||
- (i_size_read(inode) & (sector_size -1))) {
- filp->f_flags &= ~O_DIRECT;
- }
- }
- }
-#endif
-
/*
* buffered reads protect themselves in ->readpage(). O_DIRECT reads
* need locks to protect pending reads from racing with truncate.
ocfs2_node_map_init(&osb->mounted_map);
ocfs2_node_map_init(&osb->recovery_map);
ocfs2_node_map_init(&osb->umount_map);
+ ocfs2_node_map_init(&osb->osb_recovering_orphan_dirs);
}
static void ocfs2_do_node_down(int node_num,
#include "dlmglue.h"
#include "extent_map.h"
#include "file.h"
+#include "heartbeat.h"
#include "inode.h"
#include "journal.h"
#include "namei.h"
return status;
}
+/*
+ * Serialize with orphan dir recovery. If the process doing
+ * recovery on this orphan dir does an iget() with the dir
+ * i_mutex held, we'll deadlock here. Instead we detect this
+ * and exit early - recovery will wipe this inode for us.
+ */
+static int ocfs2_check_orphan_recovery_state(struct ocfs2_super *osb,
+ int slot)
+{
+ int ret = 0;
+
+ spin_lock(&osb->osb_lock);
+ if (ocfs2_node_map_test_bit(osb, &osb->osb_recovering_orphan_dirs, slot)) {
+ mlog(0, "Recovery is happening on orphan dir %d, will skip "
+ "this inode\n", slot);
+ ret = -EDEADLK;
+ goto out;
+ }
+ /* This signals to the orphan recovery process that it should
+ * wait for us to handle the wipe. */
+ osb->osb_orphan_wipes[slot]++;
+out:
+ spin_unlock(&osb->osb_lock);
+ return ret;
+}
+
+static void ocfs2_signal_wipe_completion(struct ocfs2_super *osb,
+ int slot)
+{
+ spin_lock(&osb->osb_lock);
+ osb->osb_orphan_wipes[slot]--;
+ spin_unlock(&osb->osb_lock);
+
+ wake_up(&osb->osb_wipe_event);
+}
+
static int ocfs2_wipe_inode(struct inode *inode,
struct buffer_head *di_bh)
{
/* We've already voted on this so it should be readonly - no
* spinlock needed. */
orphaned_slot = OCFS2_I(inode)->ip_orphaned_slot;
+
+ status = ocfs2_check_orphan_recovery_state(osb, orphaned_slot);
+ if (status)
+ return status;
+
orphan_dir_inode = ocfs2_get_system_file_inode(osb,
ORPHAN_DIR_SYSTEM_INODE,
orphaned_slot);
brelse(orphan_dir_bh);
bail:
iput(orphan_dir_inode);
+ ocfs2_signal_wipe_completion(osb, orphaned_slot);
return status;
}
status = ocfs2_wipe_inode(inode, di_bh);
if (status < 0) {
- mlog_errno(status);
+ if (status != -EDEADLK)
+ mlog_errno(status);
goto bail_unlock_inode;
}
return status;
}
-static int ocfs2_recover_orphans(struct ocfs2_super *osb,
- int slot)
+static int ocfs2_queue_orphans(struct ocfs2_super *osb,
+ int slot,
+ struct inode **head)
{
- int status = 0;
- int have_disk_lock = 0;
- struct inode *inode = NULL;
- struct inode *iter;
+ int status;
struct inode *orphan_dir_inode = NULL;
+ struct inode *iter;
unsigned long offset, blk, local;
struct buffer_head *bh = NULL;
struct ocfs2_dir_entry *de;
struct super_block *sb = osb->sb;
- struct ocfs2_inode_info *oi;
-
- mlog(0, "Recover inodes from orphan dir in slot %d\n", slot);
orphan_dir_inode = ocfs2_get_system_file_inode(osb,
ORPHAN_DIR_SYSTEM_INODE,
if (!orphan_dir_inode) {
status = -ENOENT;
mlog_errno(status);
- goto out;
- }
+ return status;
+ }
mutex_lock(&orphan_dir_inode->i_mutex);
status = ocfs2_meta_lock(orphan_dir_inode, NULL, NULL, 0);
if (status < 0) {
- mutex_unlock(&orphan_dir_inode->i_mutex);
mlog_errno(status);
goto out;
}
- have_disk_lock = 1;
offset = 0;
iter = NULL;
if (!bh)
status = -EINVAL;
if (status < 0) {
- mutex_unlock(&orphan_dir_inode->i_mutex);
if (bh)
brelse(bh);
mlog_errno(status);
- goto out;
+ goto out_unlock;
}
local = 0;
if (!ocfs2_check_dir_entry(orphan_dir_inode,
de, bh, local)) {
- mutex_unlock(&orphan_dir_inode->i_mutex);
status = -EINVAL;
mlog_errno(status);
brelse(bh);
- goto out;
+ goto out_unlock;
}
local += le16_to_cpu(de->rec_len);
mlog(0, "queue orphan %"MLFu64"\n",
OCFS2_I(iter)->ip_blkno);
- OCFS2_I(iter)->ip_next_orphan = inode;
- inode = iter;
+ /* No locking is required for the next_orphan
+ * queue as there is only ever a single
+ * process doing orphan recovery. */
+ OCFS2_I(iter)->ip_next_orphan = *head;
+ *head = iter;
}
brelse(bh);
}
- mutex_unlock(&orphan_dir_inode->i_mutex);
+out_unlock:
ocfs2_meta_unlock(orphan_dir_inode, 0);
- have_disk_lock = 0;
-
+out:
+ mutex_unlock(&orphan_dir_inode->i_mutex);
iput(orphan_dir_inode);
- orphan_dir_inode = NULL;
+ return status;
+}
+
+static int ocfs2_orphan_recovery_can_continue(struct ocfs2_super *osb,
+ int slot)
+{
+ int ret;
+
+ spin_lock(&osb->osb_lock);
+ ret = !osb->osb_orphan_wipes[slot];
+ spin_unlock(&osb->osb_lock);
+ return ret;
+}
+
+static void ocfs2_mark_recovering_orphan_dir(struct ocfs2_super *osb,
+ int slot)
+{
+ spin_lock(&osb->osb_lock);
+ /* Mark ourselves such that new processes in delete_inode()
+ * know to quit early. */
+ ocfs2_node_map_set_bit(osb, &osb->osb_recovering_orphan_dirs, slot);
+ while (osb->osb_orphan_wipes[slot]) {
+ /* If any processes are already in the middle of an
+ * orphan wipe on this dir, then we need to wait for
+ * them. */
+ spin_unlock(&osb->osb_lock);
+ wait_event_interruptible(osb->osb_wipe_event,
+ ocfs2_orphan_recovery_can_continue(osb, slot));
+ spin_lock(&osb->osb_lock);
+ }
+ spin_unlock(&osb->osb_lock);
+}
+
+static void ocfs2_clear_recovering_orphan_dir(struct ocfs2_super *osb,
+ int slot)
+{
+ ocfs2_node_map_clear_bit(osb, &osb->osb_recovering_orphan_dirs, slot);
+}
+
+/*
+ * Orphan recovery. Each mounted node has it's own orphan dir which we
+ * must run during recovery. Our strategy here is to build a list of
+ * the inodes in the orphan dir and iget/iput them. The VFS does
+ * (most) of the rest of the work.
+ *
+ * Orphan recovery can happen at any time, not just mount so we have a
+ * couple of extra considerations.
+ *
+ * - We grab as many inodes as we can under the orphan dir lock -
+ * doing iget() outside the orphan dir risks getting a reference on
+ * an invalid inode.
+ * - We must be sure not to deadlock with other processes on the
+ * system wanting to run delete_inode(). This can happen when they go
+ * to lock the orphan dir and the orphan recovery process attempts to
+ * iget() inside the orphan dir lock. This can be avoided by
+ * advertising our state to ocfs2_delete_inode().
+ */
+static int ocfs2_recover_orphans(struct ocfs2_super *osb,
+ int slot)
+{
+ int ret = 0;
+ struct inode *inode = NULL;
+ struct inode *iter;
+ struct ocfs2_inode_info *oi;
+
+ mlog(0, "Recover inodes from orphan dir in slot %d\n", slot);
+
+ ocfs2_mark_recovering_orphan_dir(osb, slot);
+ ret = ocfs2_queue_orphans(osb, slot, &inode);
+ ocfs2_clear_recovering_orphan_dir(osb, slot);
+
+ /* Error here should be noted, but we want to continue with as
+ * many queued inodes as we've got. */
+ if (ret)
+ mlog_errno(ret);
while (inode) {
oi = OCFS2_I(inode);
inode = iter;
}
-out:
- if (have_disk_lock)
- ocfs2_meta_unlock(orphan_dir_inode, 0);
-
- if (orphan_dir_inode)
- iput(orphan_dir_inode);
-
- return status;
+ return ret;
}
static int ocfs2_wait_on_mount(struct ocfs2_super *osb)
OCFS2_MOUNT_NOINTR = 1 << 2, /* Don't catch signals */
OCFS2_MOUNT_ERRORS_PANIC = 1 << 3, /* Panic on errors */
OCFS2_MOUNT_DATA_WRITEBACK = 1 << 4, /* No data ordering */
-#ifdef OCFS2_ORACORE_WORKAROUNDS
- OCFS2_MOUNT_COMPAT_OCFS = 1 << 30, /* ocfs1 compatibility mode */
-#endif
};
#define OCFS2_OSB_SOFT_RO 0x0001
struct inode *osb_tl_inode;
struct buffer_head *osb_tl_bh;
struct work_struct osb_truncate_log_wq;
+
+ struct ocfs2_node_map osb_recovering_orphan_dirs;
+ unsigned int *osb_orphan_wipes;
+ wait_queue_head_t osb_wipe_event;
};
#define OCFS2_SB(sb) ((struct ocfs2_super *)(sb)->s_fs_info)
/* Journal limits (in bytes) */
#define OCFS2_MIN_JOURNAL_SIZE (4 * 1024 * 1024)
-#define OCFS2_MAX_JOURNAL_SIZE (500 * 1024 * 1024)
struct ocfs2_system_inode_info {
char *si_name;
}
mlog(ML_NOTICE, "max_slots for this device: %u\n", osb->max_slots);
+ init_waitqueue_head(&osb->osb_wipe_event);
+ osb->osb_orphan_wipes = kcalloc(osb->max_slots,
+ sizeof(*osb->osb_orphan_wipes),
+ GFP_KERNEL);
+ if (!osb->osb_orphan_wipes) {
+ status = -ENOMEM;
+ mlog_errno(status);
+ goto bail;
+ }
+
osb->s_feature_compat =
le32_to_cpu(OCFS2_RAW_SB(di)->s_feature_compat);
osb->s_feature_ro_compat =
if (osb->slot_info)
ocfs2_free_slot_info(osb->slot_info);
+ kfree(osb->osb_orphan_wipes);
/* FIXME
* This belongs in journal shutdown, but because we have to
* allocate osb->journal at the start of ocfs2_initalize_osb(),
ibm_partition(struct parsed_partitions *state, struct block_device *bdev)
{
int blocksize, offset, size;
+ loff_t i_size;
dasd_information_t *info;
struct hd_geometry *geo;
char type[5] = {0,};
unsigned char *data;
Sector sect;
+ blocksize = bdev_hardsect_size(bdev);
+ if (blocksize <= 0)
+ return 0;
+ i_size = i_size_read(bdev->bd_inode);
+ if (i_size == 0)
+ return 0;
+
if ((info = kmalloc(sizeof(dasd_information_t), GFP_KERNEL)) == NULL)
goto out_noinfo;
if ((geo = kmalloc(sizeof(struct hd_geometry), GFP_KERNEL)) == NULL)
if (ioctl_by_bdev(bdev, BIODASDINFO, (unsigned long)info) != 0 ||
ioctl_by_bdev(bdev, HDIO_GETGEO, (unsigned long)geo) != 0)
goto out_noioctl;
-
- if ((blocksize = bdev_hardsect_size(bdev)) <= 0)
- goto out_badsect;
/*
* Get volume label, extract name and type.
} else {
printk("CMS1/%8s:", name);
offset = (info->label_block + 1);
- size = bdev->bd_inode->i_size >> 9;
+ size = i_size >> 9;
}
put_partition(state, 1, offset*(blocksize >> 9),
size-offset*(blocksize >> 9));
else
printk("(nonl)/%8s:", name);
offset = (info->label_block + 1);
- size = (bdev->bd_inode->i_size >> 9);
+ size = i_size >> 9;
put_partition(state, 1, offset*(blocksize >> 9),
size-offset*(blocksize >> 9));
}
return 1;
out_readerr:
-out_badsect:
out_noioctl:
kfree(label);
out_nolab:
.fasync = pipe_rdwr_fasync,
};
-struct file_operations read_pipe_fops = {
+static struct file_operations read_pipe_fops = {
.llseek = no_llseek,
.read = pipe_read,
.readv = pipe_readv,
.fasync = pipe_read_fasync,
};
-struct file_operations write_pipe_fops = {
+static struct file_operations write_pipe_fops = {
.llseek = no_llseek,
.read = bad_pipe_r,
.write = pipe_write,
.fasync = pipe_write_fasync,
};
-struct file_operations rdwr_pipe_fops = {
+static struct file_operations rdwr_pipe_fops = {
.llseek = no_llseek,
.read = pipe_read,
.readv = pipe_readv,
{
pte_t *pte, ptent;
spinlock_t *ptl;
- unsigned long pfn;
struct page *page;
pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
continue;
mss->resident += PAGE_SIZE;
- pfn = pte_pfn(ptent);
- if (!pfn_valid(pfn))
+
+ page = vm_normal_page(vma, addr, ptent);
+ if (!page)
continue;
- page = pfn_to_page(pfn);
- if (page_count(page) >= 2) {
+ if (page_mapcount(page) >= 2) {
if (pte_dirty(ptent))
mss->shared_dirty += PAGE_SIZE;
else
struct mem_size_stats mss;
memset(&mss, 0, sizeof mss);
- if (vma->vm_mm)
+ if (vma->vm_mm && !is_vm_hugetlb_page(vma))
smaps_pgd_range(vma, vma->vm_start, vma->vm_end, &mss);
return show_map_internal(m, v, &mss);
}
inode->i_gid = dir->i_gid;
d_instantiate(dentry, inode);
dget(dentry);
+ dir->i_mtime = dir->i_ctime = CURRENT_TIME;
} else
iput(inode);
}
partially overwritten pages, if needed. And lock the pages,
so that nobody else can access these until we are done.
We get number of actual blocks needed as a result. */
- blocks_to_allocate =
- reiserfs_prepare_file_region_for_write(inode, pos,
- num_pages,
- write_bytes,
- prepared_pages);
- if (blocks_to_allocate < 0) {
- res = blocks_to_allocate;
+ res = reiserfs_prepare_file_region_for_write(inode, pos,
+ num_pages,
+ write_bytes,
+ prepared_pages);
+ if (res < 0) {
reiserfs_release_claimed_blocks(inode->i_sb,
num_pages <<
(PAGE_CACHE_SHIFT -
break;
}
+ blocks_to_allocate = res;
+
/* First we correct our estimate of how many blocks we need */
reiserfs_release_claimed_blocks(inode->i_sb,
(num_pages <<
reiserfs_write_lock(inode->i_sb);
version = get_inode_item_key_version(inode);
- if (block < 0) {
- reiserfs_write_unlock(inode->i_sb);
- return -EIO;
- }
-
if (!file_capable(inode, block)) {
reiserfs_write_unlock(inode->i_sb);
return -EFBIG;
//pos_in_item * inode->i_sb->s_blocksize,
TYPE_INDIRECT, 3); // key type is unimportant
+ RFALSE(cpu_key_k_offset(&tmp_key) > cpu_key_k_offset(&key),
+ "green-805: invalid offset");
blocks_needed =
1 +
((cpu_key_k_offset(&key) -
cpu_key_k_offset(&tmp_key)) >> inode->i_sb->
s_blocksize_bits);
- RFALSE(blocks_needed < 0, "green-805: invalid offset");
if (blocks_needed == 1) {
un = &unf_single;
return 1;
}
jh = (struct reiserfs_journal_header *)(journal->j_header_bh->b_data);
- if (le32_to_cpu(jh->j_first_unflushed_offset) >= 0 &&
- le32_to_cpu(jh->j_first_unflushed_offset) <
+ if (le32_to_cpu(jh->j_first_unflushed_offset) <
SB_ONDISK_JOURNAL_SIZE(p_s_sb)
&& le32_to_cpu(jh->j_last_flush_trans_id) > 0) {
oldest_start =
/* mark, that this generation number is used */
if (de->de_gen_number_bit_string)
set_bit(GET_GENERATION_NUMBER(deh_offset(deh)),
- (unsigned long *)de->de_gen_number_bit_string);
+ de->de_gen_number_bit_string);
// calculate pointer to name and namelen
de->de_entry_num = i;
struct reiserfs_de_head *deh;
INITIALIZE_PATH(path);
struct reiserfs_dir_entry de;
- int bit_string[MAX_GENERATION_NUMBER / (sizeof(int) * 8) + 1];
+ DECLARE_BITMAP(bit_string, MAX_GENERATION_NUMBER + 1);
int gen_number;
char small_buf[32 + DEH_SIZE]; /* 48 bytes now and we avoid kmalloc
if we create file with short name */
/* find the proper place for the new entry */
memset(bit_string, 0, sizeof(bit_string));
- de.de_gen_number_bit_string = (char *)bit_string;
+ de.de_gen_number_bit_string = bit_string;
retval = reiserfs_find_entry(dir, name, namelen, &path, &de);
if (retval != NAME_NOT_FOUND) {
if (buffer != small_buf)
}
gen_number =
- find_first_zero_bit((unsigned long *)bit_string,
+ find_first_zero_bit(bit_string,
MAX_GENERATION_NUMBER + 1);
if (gen_number > MAX_GENERATION_NUMBER) {
/* there is no free generation number */
}
inode->i_uid = le32_to_cpu(fe->uid);
- if ( inode->i_uid == -1 ) inode->i_uid = UDF_SB(inode->i_sb)->s_uid;
+ if (inode->i_uid == -1 || UDF_QUERY_FLAG(inode->i_sb,
+ UDF_FLAG_UID_IGNORE))
+ inode->i_uid = UDF_SB(inode->i_sb)->s_uid;
inode->i_gid = le32_to_cpu(fe->gid);
- if ( inode->i_gid == -1 ) inode->i_gid = UDF_SB(inode->i_sb)->s_gid;
+ if (inode->i_gid == -1 || UDF_QUERY_FLAG(inode->i_sb,
+ UDF_FLAG_GID_IGNORE))
+ inode->i_gid = UDF_SB(inode->i_sb)->s_gid;
inode->i_nlink = le16_to_cpu(fe->fileLinkCount);
if (!inode->i_nlink)
return err;
}
- if (inode->i_uid != UDF_SB(inode->i_sb)->s_uid)
+ if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_UID_FORGET))
+ fe->uid = cpu_to_le32(-1);
+ else if (inode->i_uid != UDF_SB(inode->i_sb)->s_uid)
fe->uid = cpu_to_le32(inode->i_uid);
- if (inode->i_gid != UDF_SB(inode->i_sb)->s_gid)
+ if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_GID_FORGET))
+ fe->gid = cpu_to_le32(-1);
+ else if (inode->i_gid != UDF_SB(inode->i_sb)->s_gid)
fe->gid = cpu_to_le32(inode->i_gid);
udfperms = ((inode->i_mode & S_IRWXO) ) |
Opt_gid, Opt_uid, Opt_umask, Opt_session, Opt_lastblock,
Opt_anchor, Opt_volume, Opt_partition, Opt_fileset,
Opt_rootdir, Opt_utf8, Opt_iocharset,
- Opt_err
+ Opt_err, Opt_uforget, Opt_uignore, Opt_gforget, Opt_gignore
};
static match_table_t tokens = {
{Opt_adinicb, "adinicb"},
{Opt_shortad, "shortad"},
{Opt_longad, "longad"},
+ {Opt_uforget, "uid=forget"},
+ {Opt_uignore, "uid=ignore"},
+ {Opt_gforget, "gid=forget"},
+ {Opt_gignore, "gid=ignore"},
{Opt_gid, "gid=%u"},
{Opt_uid, "uid=%u"},
{Opt_umask, "umask=%o"},
uopt->flags |= (1 << UDF_FLAG_NLS_MAP);
break;
#endif
+ case Opt_uignore:
+ uopt->flags |= (1 << UDF_FLAG_UID_IGNORE);
+ break;
+ case Opt_uforget:
+ uopt->flags |= (1 << UDF_FLAG_UID_FORGET);
+ break;
+ case Opt_gignore:
+ uopt->flags |= (1 << UDF_FLAG_GID_IGNORE);
+ break;
+ case Opt_gforget:
+ uopt->flags |= (1 << UDF_FLAG_GID_FORGET);
+ break;
default:
printk(KERN_ERR "udf: bad mount option \"%s\" "
"or missing value\n", p);
#define UDF_FLAG_VARCONV 8
#define UDF_FLAG_NLS_MAP 9
#define UDF_FLAG_UTF8 10
+#define UDF_FLAG_UID_FORGET 11 /* save -1 for uid to disk */
+#define UDF_FLAG_UID_IGNORE 12 /* use sb uid instead of on disk uid */
+#define UDF_FLAG_GID_FORGET 13
+#define UDF_FLAG_GID_IGNORE 14
#define UDF_PART_FLAG_UNALLOC_BITMAP 0x0001
#define UDF_PART_FLAG_UNALLOC_TABLE 0x0002
/* First sum forwards in this page */
do {
- if (mapped != buffer_mapped(bh))
+ if (!buffer_uptodate(bh) || (mapped != buffer_mapped(bh)))
return total;
total += bh->b_size;
} while ((bh = bh->b_this_page) != head);
kmem_zone_t *qm_dqtrxzone;
STATIC kmem_shaker_t xfs_qm_shaker;
+STATIC cred_t xfs_zerocr;
+STATIC xfs_inode_t xfs_zeroino;
+
STATIC void xfs_qm_list_init(xfs_dqlist_t *, char *, int);
STATIC void xfs_qm_list_destroy(xfs_dqlist_t *);
xfs_trans_t *tp;
int error;
unsigned long s;
- cred_t zerocr;
- xfs_inode_t zeroino;
int committed;
tp = xfs_trans_alloc(mp, XFS_TRANS_QM_QINOCREATE);
xfs_trans_cancel(tp, 0);
return error;
}
- memset(&zerocr, 0, sizeof(zerocr));
- memset(&zeroino, 0, sizeof(zeroino));
- if ((error = xfs_dir_ialloc(&tp, &zeroino, S_IFREG, 1, 0,
- &zerocr, 0, 1, ip, &committed))) {
+ if ((error = xfs_dir_ialloc(&tp, &xfs_zeroino, S_IFREG, 1, 0,
+ &xfs_zerocr, 0, 1, ip, &committed))) {
xfs_trans_cancel(tp, XFS_TRANS_RELEASE_LOG_RES |
XFS_TRANS_ABORT);
return error;
/*
* Lock the inode.
*/
- if ((error = xfs_trans_iget(mp, tp, ino, 0, XFS_ILOCK_EXCL, &ip)))
+ if ((error = xfs_trans_iget(mp, tp, ino, 0,
+ XFS_ILOCK_EXCL, &ip)))
goto error_exit;
XFS_BMAP_INIT(&flist, &firstblock);
/*
/*
* Lock the bitmap inode.
*/
- if ((error = xfs_trans_iget(mp, tp, ino, 0, XFS_ILOCK_EXCL,
- &ip)))
+ if ((error = xfs_trans_iget(mp, tp, ino, 0,
+ XFS_ILOCK_EXCL, &ip)))
goto error_exit;
/*
* Get a buffer for the block.
/*
* Lock out other callers by grabbing the bitmap inode lock.
*/
- if ((error = xfs_trans_iget(mp, tp, 0, mp->m_sb.sb_rbmino,
- XFS_ILOCK_EXCL, &ip)))
+ if ((error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rbmino, 0,
+ XFS_ILOCK_EXCL, &ip)))
goto error_exit;
ASSERT(ip == mp->m_rbmip);
/*
/*
* Get the summary inode into the transaction.
*/
- if ((error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rsumino,
- 0, XFS_ILOCK_EXCL, &ip)))
+ if ((error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rsumino, 0,
+ XFS_ILOCK_EXCL, &ip)))
goto error_exit;
ASSERT(ip == mp->m_rsumip);
/*
/*
* Lock out other callers by grabbing the bitmap inode lock.
*/
- error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rbmino, 0, XFS_ILOCK_EXCL, &ip);
- if (error) {
+ if ((error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rbmino, 0,
+ XFS_ILOCK_EXCL, &ip)))
return error;
- }
sumbp = NULL;
/*
* Allocate by size, or near another block, or exactly at some block.
/*
* Synchronize by locking the bitmap inode.
*/
- error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rbmino, 0, XFS_ILOCK_EXCL, &ip);
- if (error) {
+ if ((error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rbmino, 0,
+ XFS_ILOCK_EXCL, &ip)))
return error;
- }
#if defined(__KERNEL__) && defined(DEBUG)
/*
* Check to see that this whole range is currently allocated.
__uint64_t seq; /* sequence number of file creation */
__uint64_t *seqp; /* pointer to seqno in inode */
- error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rbmino, 0, XFS_ILOCK_EXCL, &ip);
- if (error)
+ if ((error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rbmino, 0,
+ XFS_ILOCK_EXCL, &ip)))
return error;
ASSERT(ip == mp->m_rbmip);
seqp = (__uint64_t *)&ip->i_d.di_atime;
unsigned int save[FP_SOFT_SIZE]; /* undefined information */
};
+#define IWMMXT_SIZE 0x98
+
struct iwmmxt_struct {
- unsigned int save[0x98/sizeof(int) + 1];
+ unsigned int save[IWMMXT_SIZE / sizeof(unsigned int)];
};
union fp_state {
struct cpu_context_save cpu_context; /* cpu context */
__u8 used_cp[16]; /* thread used copro */
unsigned long tp_value;
- union fp_state fpstate;
+ union fp_state fpstate __attribute__((aligned(8)));
union vfp_state vfpstate;
struct restart_block restart_block;
};
asm("mcr%? p15, 0, %0, c8, c6, 1" : : "r" (kaddr));
if (tlb_flag(TLB_V6_I_PAGE))
asm("mcr%? p15, 0, %0, c8, c5, 1" : : "r" (kaddr));
+
+ /* The ARM ARM states that the completion of a TLB maintenance
+ * operation is only guaranteed by a DSB instruction
+ */
+ if (tlb_flag(TLB_V6_U_PAGE | TLB_V6_D_PAGE | TLB_V6_I_PAGE))
+ asm("mcr%? p15, 0, %0, c7, c10, 4" : : "r" (zero));
}
/*
#define __get_unaligned(ptr, size) ({ \
const void *__gu_p = ptr; \
- __typeof__(*(ptr)) val; \
+ __u64 val; \
switch (size) { \
case 1: \
val = *(const __u8 *)__gu_p; \
default: \
bad_unaligned_access_length(); \
}; \
- val; \
+ (__typeof__(*(ptr)))val; \
})
#define __put_unaligned(val, ptr, size) \
void switch_ipi_to_APIC_timer(void *cpumask);
#define ARCH_APICTIMER_STOPS_ON_C3 1
+extern int timer_over_8254;
+
#else /* !CONFIG_X86_LOCAL_APIC */
static inline void lapic_shutdown(void) { }
* to ACPI3.0, this limit will be removed. The notion of "compact nodes"
* should be deleted and TIOs should be included in MAX_NUMNODES.
*/
-#define MAX_COMPACT_NODES 512
+#define MAX_TIO_NODES MAX_NUMNODES
+#define MAX_COMPACT_NODES (MAX_NUMNODES + MAX_TIO_NODES)
/*
* Maximum number of nodes in all partitions and in all coherency domains.
}
#ifdef CONFIG_RMW_INSNS
+
static inline int atomic_add_return(int i, atomic_t *v)
{
int t, tmp;
: "g" (i), "2" (atomic_read(v)));
return t;
}
+
+#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
#else /* !CONFIG_RMW_INSNS */
+
static inline int atomic_add_return(int i, atomic_t * v)
{
unsigned long flags;
return t;
}
+
+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+ unsigned long flags;
+ int prev;
+
+ local_irq_save(flags);
+ prev = atomic_read(v);
+ if (prev == old)
+ atomic_set(v, new);
+ local_irq_restore(flags);
+ return prev;
+}
+
+static inline int atomic_xchg(atomic_t *v, int new)
+{
+ unsigned long flags;
+ int prev;
+
+ local_irq_save(flags);
+ prev = atomic_read(v);
+ atomic_set(v, new);
+ local_irq_restore(flags);
+ return prev;
+}
+
#endif /* !CONFIG_RMW_INSNS */
#define atomic_dec_return(v) atomic_sub_return(1, (v))
__asm__ __volatile__("orl %1,%0" : "+m" (*v) : "id" (mask));
}
-#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
#define atomic_add_unless(v, a, u) \
({ \
int c, old; \
" subu %0, %1, %3 \n"
" bltz %0, 1f \n"
" sc %0, %2 \n"
+ " .set noreorder \n"
" beqzl %0, 1b \n"
+ " subu %0, %1, %3 \n"
+ " .set reorder \n"
" sync \n"
"1: \n"
" .set mips0 \n"
" subu %0, %1, %3 \n"
" bltz %0, 1f \n"
" sc %0, %2 \n"
+ " .set noreorder \n"
" beqz %0, 1b \n"
+ " subu %0, %1, %3 \n"
+ " .set reorder \n"
" sync \n"
"1: \n"
" .set mips0 \n"
" dsubu %0, %1, %3 \n"
" bltz %0, 1f \n"
" scd %0, %2 \n"
+ " .set noreorder \n"
" beqzl %0, 1b \n"
+ " dsubu %0, %1, %3 \n"
+ " .set reorder \n"
" sync \n"
"1: \n"
" .set mips0 \n"
" dsubu %0, %1, %3 \n"
" bltz %0, 1f \n"
" scd %0, %2 \n"
+ " .set noreorder \n"
" beqz %0, 1b \n"
+ " dsubu %0, %1, %3 \n"
+ " .set reorder \n"
" sync \n"
"1: \n"
" .set mips0 \n"
#define ioremap_nocache(offset, size) \
__ioremap_mode((offset), (size), _CACHE_UNCACHED)
+/*
+ * ioremap_cachable - map bus memory into CPU space
+ * @offset: bus address of the memory
+ * @size: size of the resource to map
+ *
+ * ioremap_nocache performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address.
+ *
+ * This version of ioremap ensures that the memory is marked cachable by
+ * the CPU. Also enables full write-combining. Useful for some
+ * memory-like regions on I/O busses.
+ */
+#define ioremap_cachable(offset, size) \
+ __ioremap_mode((offset), (size), PAGE_CACHABLE_DEFAULT)
+
/*
* These two are MIPS specific ioremap variant. ioremap_cacheable_cow
* requests a cachable mapping, ioremap_uncached_accelerated requests a
return cpus_weight(cpu_callout_map);
}
-/* These are defined by the board-specific code. */
+/*
+ * These are defined by the board-specific code.
+ */
/*
* Cause the function described by call_data to be executed on the passed
extern void prom_init_secondary(void);
/*
- * Detect available CPUs, populate phys_cpu_present_map before smp_init
+ * Populate cpu_possible_map before smp_init, called from setup_arch.
+ */
+extern void plat_smp_setup(void);
+
+/*
+ * Called after init_IRQ but before __cpu_up.
*/
extern void prom_prepare_cpus(unsigned int max_cpus);
#endif
"2: \n"
" .set pop \n"
- : "=&r" (retval), "=m" (*m)
+ : "=&r" (retval), "=R" (*m)
: "R" (*m), "Jr" (old), "Jr" (new)
: "memory");
} else if (cpu_has_llsc) {
#endif
"2: \n"
" .set pop \n"
- : "=&r" (retval), "=m" (*m)
+ : "=&r" (retval), "=R" (*m)
: "R" (*m), "Jr" (old), "Jr" (new)
: "memory");
} else {
#endif
"2: \n"
" .set pop \n"
- : "=&r" (retval), "=m" (*m)
+ : "=&r" (retval), "=R" (*m)
: "R" (*m), "Jr" (old), "Jr" (new)
: "memory");
} else if (cpu_has_llsc) {
#endif
"2: \n"
" .set pop \n"
- : "=&r" (retval), "=m" (*m)
+ : "=&r" (retval), "=R" (*m)
: "R" (*m), "Jr" (old), "Jr" (new)
: "memory");
} else {
* <linux/vt_buffer.h> has already done the right job for us.
*/
+#undef scr_writew
+#undef scr_readw
+
static inline void scr_writew(u16 val, volatile u16 *addr)
{
*addr = cpu_to_le16(val);
#define PPC_FEATURE_POWER5_PLUS 0x00020000
#define PPC_FEATURE_CELL 0x00010000
#define PPC_FEATURE_BOOKE 0x00008000
+#define PPC_FEATURE_SMT 0x00004000
+#define PPC_FEATURE_ICACHE_SNOOP 0x00002000
#ifdef __KERNEL__
#ifndef __ASSEMBLY__
#include <linux/string.h>
struct pci_dev;
+struct pci_bus;
struct device_node;
#ifdef CONFIG_EEH
* to finish the eeh setup for this device.
*/
void eeh_add_device_early(struct device_node *);
+void eeh_add_device_late(struct pci_dev *dev);
void eeh_add_device_tree_early(struct device_node *);
-void eeh_add_device_late(struct pci_dev *);
+void eeh_add_device_tree_late(struct pci_bus *);
/**
* eeh_remove_device - undo EEH setup for the indicated pci device
static inline void eeh_add_device_tree_early(struct device_node *dn) { }
+static inline void eeh_add_device_tree_late(struct pci_bus *bus) { }
+
static inline void eeh_remove_bus_device(struct pci_dev *dev) { }
#define EEH_POSSIBLE_ERROR(val, type) (0)
#define EEH_IO_ERROR_VALUE(size) (-1UL)
"mfxer %0\n"
"std %0, 296(%2)\n"
: "=&r" (tmp1), "=&r" (tmp2)
- : "b" (newregs));
+ : "b" (newregs)
+ : "memory");
}
}
#else
(((addr) >> PUD_SHIFT) & (PTRS_PER_PUD - 1)))
#define pud_ERROR(e) \
- printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pud_val(e))
+ printk("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e))
int preempt_count; /* 0 => preemptable,
<0 => BUG */
struct restart_block restart_block;
- void __user *nvgprs_frame;
/* low level flags - has atomic operations done on it */
unsigned long flags ____cacheline_aligned_in_smp;
};
#define TIF_MEMDIE 10
#define TIF_SECCOMP 11 /* secure computing */
#define TIF_RESTOREALL 12 /* Restore all regs (implies NOERROR) */
-#define TIF_SAVE_NVGPRS 13 /* Save r14-r31 in signal frame */
#define TIF_NOERROR 14 /* Force successful syscall return */
#define TIF_RESTORE_SIGMASK 15 /* Restore signal mask in do_signal */
#define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP)
#define _TIF_SECCOMP (1<<TIF_SECCOMP)
#define _TIF_RESTOREALL (1<<TIF_RESTOREALL)
-#define _TIF_SAVE_NVGPRS (1<<TIF_SAVE_NVGPRS)
#define _TIF_NOERROR (1<<TIF_NOERROR)
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
#define _TIF_SYSCALL_T_OR_A (_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP)
#define _TIF_USER_WORK_MASK (_TIF_NOTIFY_RESUME | _TIF_SIGPENDING | \
- _TIF_NEED_RESCHED | _TIF_RESTOREALL | \
- _TIF_RESTORE_SIGMASK)
-#define _TIF_PERSYSCALL_MASK (_TIF_RESTOREALL|_TIF_NOERROR|_TIF_SAVE_NVGPRS)
+ _TIF_NEED_RESCHED | _TIF_RESTORE_SIGMASK)
+#define _TIF_PERSYSCALL_MASK (_TIF_RESTOREALL|_TIF_NOERROR)
#endif /* __KERNEL__ */
extern void account_vtime(struct task_struct *);
extern void account_tick_vtime(struct task_struct *);
extern void account_system_vtime(struct task_struct *);
+#else
+#define account_vtime(x) do { /* empty */ } while (0)
#endif
#define finish_arch_switch(prev) do { \
"4: ba 3b\n" \
" mov %5, %0\n" \
" .previous\n" \
- " .section __ex_table,#alloc\n" \
+ " .section __ex_table,\"a\"\n" \
" .align 4\n" \
" .word 1b, 4b\n" \
" .word 2b, 4b\n" \
"b 2b\n\t" \
" mov %3, %0\n\n\t" \
".previous\n\t" \
- ".section __ex_table,#alloc\n\t" \
+ ".section __ex_table,\"a\"\n\t" \
".align 4\n\t" \
".word 1b, 3b\n\t" \
".previous\n\n\t" \
__asm__ __volatile__( \
"/* Put user asm ret, inline. */\n" \
"1:\t" "st"#size "a %1, [%2] %%asi\n\n\t" \
- ".section __ex_table,#alloc\n\t" \
+ ".section __ex_table,\"a\"\n\t" \
".align 4\n\t" \
".word 1b, __ret_efault\n\n\t" \
".previous\n\n\t" \
"ret\n\t" \
" restore %%g0, %3, %%o0\n\n\t" \
".previous\n\t" \
- ".section __ex_table,#alloc\n\t" \
+ ".section __ex_table,\"a\"\n\t" \
".align 4\n\t" \
".word 1b, 3b\n\n\t" \
".previous\n\n\t" \
"b 2b\n\t" \
" mov %3, %0\n\n\t" \
".previous\n\t" \
- ".section __ex_table,#alloc\n\t" \
+ ".section __ex_table,\"a\"\n\t" \
".align 4\n\t" \
".word 1b, 3b\n\n\t" \
".previous\n\t" \
__asm__ __volatile__( \
"/* Get user asm ret, inline. */\n" \
"1:\t" "ld"#size "a [%1] %%asi, %0\n\n\t" \
- ".section __ex_table,#alloc\n\t" \
+ ".section __ex_table,\"a\"\n\t" \
".align 4\n\t" \
".word 1b,__ret_efault\n\n\t" \
".previous\n\t" \
"ret\n\t" \
" restore %%g0, %2, %%o0\n\n\t" \
".previous\n\t" \
- ".section __ex_table,#alloc\n\t" \
+ ".section __ex_table,\"a\"\n\t" \
".align 4\n\t" \
".word 1b, 3b\n\n\t" \
".previous\n\t" \
extern int acpi_skip_timer_override;
-extern int unsync_tsc_on_multicluster;
-
-static inline int acpi_madt_oem_check(char *oem, char *productid)
-{
- /* Copied from i386. Probably has too many entries. */
- if (!strncmp(oem, "IBM ENSW", 8) &&
- (!strncmp(productid, "VIGIL SMP", 9)
- || !strncmp(productid, "EXA", 3)
- || !strncmp(productid, "RUTHLESS SMP", 12))) {
- unsync_tsc_on_multicluster = 1;
- }
- return 0;
-}
-
#endif /*__KERNEL__*/
#endif /*_ASM_ACPI_H*/
COMPATIBLE_IOCTL(MEMUNLOCK)
COMPATIBLE_IOCTL(MEMGETREGIONCOUNT)
COMPATIBLE_IOCTL(MEMGETREGIONINFO)
+COMPATIBLE_IOCTL(MEMGETBADBLOCK)
+COMPATIBLE_IOCTL(MEMSETBADBLOCK)
/* NBD */
ULONG_IOCTL(NBD_SET_SOCK)
ULONG_IOCTL(NBD_SET_BLKSIZE)
extern int get_unused_fd(void);
extern void FASTCALL(put_unused_fd(unsigned int fd));
struct kmem_cache;
-extern void filp_ctor(void * objp, struct kmem_cache *cachep, unsigned long cflags);
-extern void filp_dtor(void * objp, struct kmem_cache *cachep, unsigned long dflags);
extern struct file ** alloc_fd_array(int);
extern void free_fd_array(struct file **, int);
int max_files; /* tunable */
};
extern struct files_stat_struct files_stat;
+extern int get_max_files(void);
struct inodes_stat_t {
int nr_inodes;
extern struct file_operations read_fifo_fops;
extern struct file_operations write_fifo_fops;
extern struct file_operations rdwr_fifo_fops;
-extern struct file_operations read_pipe_fops;
-extern struct file_operations write_pipe_fops;
-extern struct file_operations rdwr_pipe_fops;
extern int fs_may_remount_ro(struct super_block *);
extern int page_readlink(struct dentry *, char __user *, int);
extern void *page_follow_link_light(struct dentry *, struct nameidata *);
extern void page_put_link(struct dentry *, struct nameidata *, void *);
+extern int __page_symlink(struct inode *inode, const char *symname, int len,
+ gfp_t gfp_mask);
extern int page_symlink(struct inode *inode, const char *symname, int len);
extern struct inode_operations page_symlink_inode_operations;
extern int generic_readlink(struct dentry *, char __user *, int);
void page_alloc_init(void);
#ifdef CONFIG_NUMA
-void drain_remote_pages(void);
+void drain_node_pages(int node);
#else
-static inline void drain_remote_pages(void) { };
+static inline void drain_node_pages(int node) { };
#endif
#endif /* __LINUX_GFP_H */
extern ktime_t hrtimer_get_remaining(const struct hrtimer *timer);
extern int hrtimer_get_res(const clockid_t which_clock, struct timespec *tp);
+#ifdef CONFIG_NO_IDLE_HZ
+extern ktime_t hrtimer_get_next_event(void);
+#endif
+
static inline int hrtimer_active(const struct hrtimer *timer)
{
return timer->state == HRTIMER_PENDING;
CACHE(32768)
CACHE(65536)
CACHE(131072)
-#ifndef CONFIG_MMU
+#if (NR_CPUS > 512) || (MAX_NUMNODES > 256) || !defined(CONFIG_MMU)
CACHE(262144)
+#endif
+#ifndef CONFIG_MMU
CACHE(524288)
CACHE(1048576)
#ifdef CONFIG_LARGE_ALLOCS
#include <linux/mmzone.h>
#include <linux/notifier.h>
+struct page;
+struct zone;
+struct pglist_data;
+
#ifdef CONFIG_MEMORY_HOTPLUG
/*
* pgdat resizing functions
#define EBT_LOG_IP 0x01 /* if the frame is made by ip, log the ip information */
#define EBT_LOG_ARP 0x02
+#define EBT_LOG_NFLOG 0x04
#define EBT_LOG_MASK (EBT_LOG_IP | EBT_LOG_ARP)
#define EBT_LOG_PREFIX_SIZE 30
#define EBT_LOG_WATCHER "log"
#define IPT_LOG_TCPOPT 0x02 /* Log TCP options */
#define IPT_LOG_IPOPT 0x04 /* Log IP options */
#define IPT_LOG_UID 0x08 /* Log UID owning local socket */
-#define IPT_LOG_MASK 0x0f
+#define IPT_LOG_NFLOG 0x10 /* Log using nf_log backend */
+#define IPT_LOG_MASK 0x1f
struct ipt_log_info {
unsigned char level;
#define IP6T_LOG_TCPOPT 0x02 /* Log TCP options */
#define IP6T_LOG_IPOPT 0x04 /* Log IP options */
#define IP6T_LOG_UID 0x08 /* Log UID owning local socket */
-#define IP6T_LOG_MASK 0x0f
+#define IP6T_LOG_NFLOG 0x10 /* Log using nf_log backend */
+#define IP6T_LOG_MASK 0x1f
struct ip6t_log_info {
unsigned char level;
#define PCI_DEVICE_ID_CCD_B00B 0xb00b
#define PCI_DEVICE_ID_CCD_B00C 0xb00c
#define PCI_DEVICE_ID_CCD_B100 0xb100
+#define PCI_DEVICE_ID_CCD_B700 0xb700
+#define PCI_DEVICE_ID_CCD_B701 0xb701
#define PCI_VENDOR_ID_EXAR 0x13a8
#define PCI_DEVICE_ID_EXAR_XR17C152 0x0152
}
void percpu_counter_mod(struct percpu_counter *fbc, long amount);
+long percpu_counter_sum(struct percpu_counter *fbc);
static inline long percpu_counter_read(struct percpu_counter *fbc)
{
return fbc->count;
}
+static inline long percpu_counter_sum(struct percpu_counter *fbc)
+{
+ return percpu_counter_read_positive(fbc);
+}
+
#endif /* CONFIG_SMP */
static inline void percpu_counter_inc(struct percpu_counter *fbc)
long batch; /* Batch # for current RCU batch */
struct rcu_head *nxtlist;
struct rcu_head **nxttail;
- long count; /* # of queued items */
+ long qlen; /* # of queued callbacks */
struct rcu_head *curlist;
struct rcu_head **curtail;
struct rcu_head *donelist;
struct rcu_head **donetail;
+ long blimit; /* Upper limit on a processed batch */
int cpu;
struct rcu_head barrier;
+#ifdef CONFIG_SMP
+ long last_rs_qlen; /* qlen during the last resched */
+#endif
};
DECLARE_PER_CPU(struct rcu_data, rcu_data);
int de_entrylen;
int de_namelen;
char *de_name;
- char *de_gen_number_bit_string;
+ unsigned long *de_gen_number_bit_string;
__u32 de_dir_id;
__u32 de_objectid;
unsigned long addr, unsigned long len,
unsigned long pgoff, unsigned long flags);
void (*unmap_area) (struct mm_struct *mm, unsigned long addr);
- unsigned long mmap_base; /* base of mmap area */
- unsigned long cached_hole_size; /* if non-zero, the largest hole below free_area_cache */
+ unsigned long mmap_base; /* base of mmap area */
+ unsigned long task_size; /* size of task vm space */
+ unsigned long cached_hole_size; /* if non-zero, the largest hole below free_area_cache */
unsigned long free_area_cache; /* first hole of size cached_hole_size or larger */
pgd_t * pgd;
atomic_t mm_users; /* How many users with user space? */
}
extern void free_task(struct task_struct *tsk);
-extern void __put_task_struct(struct task_struct *tsk);
#define get_task_struct(tsk) do { atomic_inc(&(tsk)->usage); } while(0)
extern void __put_task_struct_cb(struct rcu_head *rhp);
KERN_SETUID_DUMPABLE=69, /* int: behaviour of dumps for setuid core */
KERN_SPIN_RETRY=70, /* int: number of spinlock retries */
KERN_ACPI_VIDEO_FLAGS=71, /* int: flags for setting up video after ACPI sleep */
+ KERN_IA64_UNALIGNED=72, /* int: ia64 unaligned userland trap enable */
};
int (*init_state)(struct xfrm_state *x);
void (*destructor)(struct xfrm_state *);
int (*input)(struct xfrm_state *, struct xfrm_decap_state *, struct sk_buff *skb);
- int (*post_input)(struct xfrm_state *, struct xfrm_decap_state *, struct sk_buff *skb);
int (*output)(struct xfrm_state *, struct sk_buff *pskb);
/* Estimate maximal size of result of transformation of a dgram */
u32 (*get_max_size)(struct xfrm_state *, int size);
.prod_id = { (v1), (v2), (v3), (v4) }, \
.prod_id_hash = { (vh1), (vh2), (vh3), (vh4) }, }
+#define PCMCIA_DEVICE_MANF_CARD_PROD_ID1(manf, card, v1, vh1) { \
+ .match_flags = PCMCIA_DEV_ID_MATCH_MANF_ID| \
+ PCMCIA_DEV_ID_MATCH_CARD_ID| \
+ PCMCIA_DEV_ID_MATCH_PROD_ID1, \
+ .manf_id = (manf), \
+ .card_id = (card), \
+ .prod_id = { (v1), NULL, NULL, NULL }, \
+ .prod_id_hash = { (vh1), 0, 0, 0 }, }
+
/* multi-function devices */
}
EXPORT_SYMBOL(free_task);
-void __put_task_struct(struct task_struct *tsk)
+void __put_task_struct_cb(struct rcu_head *rhp)
{
+ struct task_struct *tsk = container_of(rhp, struct task_struct, rcu);
+
WARN_ON(!(tsk->exit_state & (EXIT_DEAD | EXIT_ZOMBIE)));
WARN_ON(atomic_read(&tsk->usage));
WARN_ON(tsk == current);
*/
p->clear_child_tid = (clone_flags & CLONE_CHILD_CLEARTID) ? child_tidptr: NULL;
+ /*
+ * sigaltstack should be cleared when sharing the same VM
+ */
+ if ((clone_flags & (CLONE_VM|CLONE_VFORK)) == CLONE_VM)
+ p->sas_ss_sp = p->sas_ss_size = 0;
+
/*
* Syscall tracing should be turned off in the child regardless
* of CLONE_PTRACE.
return rem;
}
+#ifdef CONFIG_NO_IDLE_HZ
+/**
+ * hrtimer_get_next_event - get the time until next expiry event
+ *
+ * Returns the delta to the next expiry event or KTIME_MAX if no timer
+ * is pending.
+ */
+ktime_t hrtimer_get_next_event(void)
+{
+ struct hrtimer_base *base = __get_cpu_var(hrtimer_bases);
+ ktime_t delta, mindelta = { .tv64 = KTIME_MAX };
+ unsigned long flags;
+ int i;
+
+ for (i = 0; i < MAX_HRTIMER_BASES; i++, base++) {
+ struct hrtimer *timer;
+
+ spin_lock_irqsave(&base->lock, flags);
+ if (!base->first) {
+ spin_unlock_irqrestore(&base->lock, flags);
+ continue;
+ }
+ timer = rb_entry(base->first, struct hrtimer, node);
+ delta.tv64 = timer->expires.tv64;
+ spin_unlock_irqrestore(&base->lock, flags);
+ delta = ktime_sub(delta, base->get_time());
+ if (delta.tv64 < mindelta.tv64)
+ mindelta.tv64 = delta.tv64;
+ }
+ if (mindelta.tv64 < 0)
+ mindelta.tv64 = 0;
+ return mindelta;
+}
+#endif
+
/**
* hrtimer_init - initialize a timer to the given clock
*
/* Fake initialization required by compiler */
static DEFINE_PER_CPU(struct tasklet_struct, rcu_tasklet) = {NULL};
-static int maxbatch = 10000;
+static int blimit = 10;
+static int qhimark = 10000;
+static int qlowmark = 100;
+#ifdef CONFIG_SMP
+static int rsinterval = 1000;
+#endif
+
+static atomic_t rcu_barrier_cpu_count;
+static struct semaphore rcu_barrier_sema;
+static struct completion rcu_barrier_completion;
+
+#ifdef CONFIG_SMP
+static void force_quiescent_state(struct rcu_data *rdp,
+ struct rcu_ctrlblk *rcp)
+{
+ int cpu;
+ cpumask_t cpumask;
+ set_need_resched();
+ if (unlikely(rdp->qlen - rdp->last_rs_qlen > rsinterval)) {
+ rdp->last_rs_qlen = rdp->qlen;
+ /*
+ * Don't send IPI to itself. With irqs disabled,
+ * rdp->cpu is the current cpu.
+ */
+ cpumask = rcp->cpumask;
+ cpu_clear(rdp->cpu, cpumask);
+ for_each_cpu_mask(cpu, cpumask)
+ smp_send_reschedule(cpu);
+ }
+}
+#else
+static inline void force_quiescent_state(struct rcu_data *rdp,
+ struct rcu_ctrlblk *rcp)
+{
+ set_need_resched();
+}
+#endif
/**
* call_rcu - Queue an RCU callback for invocation after a grace period.
rdp = &__get_cpu_var(rcu_data);
*rdp->nxttail = head;
rdp->nxttail = &head->next;
-
- if (unlikely(++rdp->count > 10000))
- set_need_resched();
-
+ if (unlikely(++rdp->qlen > qhimark)) {
+ rdp->blimit = INT_MAX;
+ force_quiescent_state(rdp, &rcu_ctrlblk);
+ }
local_irq_restore(flags);
}
-static atomic_t rcu_barrier_cpu_count;
-static struct semaphore rcu_barrier_sema;
-static struct completion rcu_barrier_completion;
-
/**
* call_rcu_bh - Queue an RCU for invocation after a quicker grace period.
* @head: structure to be used for queueing the RCU updates.
rdp = &__get_cpu_var(rcu_bh_data);
*rdp->nxttail = head;
rdp->nxttail = &head->next;
- rdp->count++;
-/*
- * Should we directly call rcu_do_batch() here ?
- * if (unlikely(rdp->count > 10000))
- * rcu_do_batch(rdp);
- */
+
+ if (unlikely(++rdp->qlen > qhimark)) {
+ rdp->blimit = INT_MAX;
+ force_quiescent_state(rdp, &rcu_bh_ctrlblk);
+ }
+
local_irq_restore(flags);
}
next = rdp->donelist = list->next;
list->func(list);
list = next;
- rdp->count--;
- if (++count >= maxbatch)
+ rdp->qlen--;
+ if (++count >= rdp->blimit)
break;
}
+ if (rdp->blimit == INT_MAX && rdp->qlen <= qlowmark)
+ rdp->blimit = blimit;
if (!rdp->donelist)
rdp->donetail = &rdp->donelist;
else
rdp->quiescbatch = rcp->completed;
rdp->qs_pending = 0;
rdp->cpu = cpu;
+ rdp->blimit = blimit;
}
static void __devinit rcu_online_cpu(int cpu)
synchronize_rcu();
}
-module_param(maxbatch, int, 0);
+module_param(blimit, int, 0);
+module_param(qhimark, int, 0);
+module_param(qlowmark, int, 0);
+#ifdef CONFIG_SMP
+module_param(rsinterval, int, 0);
+#endif
EXPORT_SYMBOL_GPL(rcu_batches_completed);
EXPORT_SYMBOL(call_rcu); /* WARNING: GPL-only in April 2006. */
EXPORT_SYMBOL(call_rcu_bh); /* WARNING: GPL-only in April 2006. */
#define task_hot(p, now, sd) ((long long) ((now) - (p)->last_ran) \
< (long long) (sd)->cache_hot_time)
-void __put_task_struct_cb(struct rcu_head *rhp)
-{
- __put_task_struct(container_of(rhp, struct task_struct, rcu));
-}
-
-EXPORT_SYMBOL_GPL(__put_task_struct_cb);
-
/*
* These are the runqueue data structures:
*/
*/
if (unlikely(preempt_count()))
return;
+ if (unlikely(system_state != SYSTEM_RUNNING))
+ return;
do {
add_preempt_count(PREEMPT_ACTIVE);
schedule();
runqueue_t *rq = cpu_rq(cpu);
unsigned long flags;
+ idle->timestamp = sched_clock();
idle->sleep_avg = 0;
idle->array = NULL;
idle->prio = MAX_PRIO;
#include <asm/uaccess.h>
#include <asm/processor.h>
+extern int proc_nr_files(ctl_table *table, int write, struct file *filp,
+ void __user *buffer, size_t *lenp, loff_t *ppos);
+
#if defined(CONFIG_SYSCTL)
/* External variables not in a header file. */
extern int acct_parm[];
#endif
+#ifdef CONFIG_IA64
+extern int no_unaligned_warning;
+#endif
+
static int parse_table(int __user *, int, void __user *, size_t __user *, void __user *, size_t,
ctl_table *, void **);
static int proc_doutsstring(ctl_table *table, int write, struct file *filp,
.data = &acpi_video_flags,
.maxlen = sizeof (unsigned long),
.mode = 0644,
+ .proc_handler = &proc_doulongvec_minmax,
+ },
+#endif
+#ifdef CONFIG_IA64
+ {
+ .ctl_name = KERN_IA64_UNALIGNED,
+ .procname = "ignore-unaligned-usertrap",
+ .data = &no_unaligned_warning,
+ .maxlen = sizeof (int),
+ .mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
.data = &files_stat,
.maxlen = 3*sizeof(int),
.mode = 0444,
- .proc_handler = &proc_dointvec,
+ .proc_handler = &proc_nr_files,
},
{
.ctl_name = FS_MAXFILE,
struct list_head *list;
struct timer_list *nte;
unsigned long expires;
+ unsigned long hr_expires = MAX_JIFFY_OFFSET;
+ ktime_t hr_delta;
tvec_t *varray[4];
int i, j;
+ hr_delta = hrtimer_get_next_event();
+ if (hr_delta.tv64 != KTIME_MAX) {
+ struct timespec tsdelta;
+ tsdelta = ktime_to_timespec(hr_delta);
+ hr_expires = timespec_to_jiffies(&tsdelta);
+ if (hr_expires < 3)
+ return hr_expires + jiffies;
+ }
+ hr_expires += jiffies;
+
base = &__get_cpu_var(tvec_bases);
spin_lock(&base->t_base.lock);
expires = base->timer_jiffies + (LONG_MAX >> 1);
}
}
spin_unlock(&base->t_base.lock);
+
+ if (time_before(hr_expires, expires))
+ return hr_expires;
+
return expires;
}
#endif
void do_timer(struct pt_regs *regs)
{
jiffies_64++;
+ /* prevent loading jiffies before storing new jiffies_64 value. */
+ barrier();
update_times();
softlockup_tick(regs);
}
return x();
case TIME_SOURCE_MMIO64 :
- return readq((void __iomem *) time_interpolator->addr);
+ return readq_relaxed((void __iomem *)time_interpolator->addr);
case TIME_SOURCE_MMIO32 :
- return readl((void __iomem *) time_interpolator->addr);
+ return readl_relaxed((void __iomem *)time_interpolator->addr);
default: return get_cycles();
}
onlined_pages++;
}
zone->present_pages += onlined_pages;
+ zone->zone_pgdat->node_present_pages += onlined_pages;
setup_per_zone_pages_min();
return policy;
}
-static void gather_stats(struct page *, void *);
+static void gather_stats(struct page *, void *, int pte_dirty);
static void migrate_page_add(struct page *page, struct list_head *pagelist,
unsigned long flags);
continue;
if (flags & MPOL_MF_STATS)
- gather_stats(page, private);
+ gather_stats(page, private, pte_dirty(*pte));
else if (flags & (MPOL_MF_MOVE | MPOL_MF_MOVE_ALL))
migrate_page_add(page, private, flags);
else
goto out;
}
- err = do_migrate_pages(mm, &old, &new, MPOL_MF_MOVE);
+ err = do_migrate_pages(mm, &old, &new,
+ capable(CAP_SYS_ADMIN) ? MPOL_MF_MOVE_ALL : MPOL_MF_MOVE);
out:
mmput(mm);
return err;
struct numa_maps {
unsigned long pages;
unsigned long anon;
- unsigned long mapped;
+ unsigned long active;
+ unsigned long writeback;
unsigned long mapcount_max;
+ unsigned long dirty;
+ unsigned long swapcache;
unsigned long node[MAX_NUMNODES];
};
-static void gather_stats(struct page *page, void *private)
+static void gather_stats(struct page *page, void *private, int pte_dirty)
{
struct numa_maps *md = private;
int count = page_mapcount(page);
- if (count)
- md->mapped++;
+ md->pages++;
+ if (pte_dirty || PageDirty(page))
+ md->dirty++;
- if (count > md->mapcount_max)
- md->mapcount_max = count;
+ if (PageSwapCache(page))
+ md->swapcache++;
- md->pages++;
+ if (PageActive(page))
+ md->active++;
+
+ if (PageWriteback(page))
+ md->writeback++;
if (PageAnon(page))
md->anon++;
+ if (count > md->mapcount_max)
+ md->mapcount_max = count;
+
md->node[page_to_nid(page)]++;
cond_resched();
}
+#ifdef CONFIG_HUGETLB_PAGE
+static void check_huge_range(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end,
+ struct numa_maps *md)
+{
+ unsigned long addr;
+ struct page *page;
+
+ for (addr = start; addr < end; addr += HPAGE_SIZE) {
+ pte_t *ptep = huge_pte_offset(vma->vm_mm, addr & HPAGE_MASK);
+ pte_t pte;
+
+ if (!ptep)
+ continue;
+
+ pte = *ptep;
+ if (pte_none(pte))
+ continue;
+
+ page = pte_page(pte);
+ if (!page)
+ continue;
+
+ gather_stats(page, md, pte_dirty(*ptep));
+ }
+}
+#else
+static inline void check_huge_range(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end,
+ struct numa_maps *md)
+{
+}
+#endif
+
int show_numa_map(struct seq_file *m, void *v)
{
struct task_struct *task = m->private;
struct vm_area_struct *vma = v;
struct numa_maps *md;
+ struct file *file = vma->vm_file;
+ struct mm_struct *mm = vma->vm_mm;
int n;
char buffer[50];
- if (!vma->vm_mm)
+ if (!mm)
return 0;
md = kzalloc(sizeof(struct numa_maps), GFP_KERNEL);
if (!md)
return 0;
- check_pgd_range(vma, vma->vm_start, vma->vm_end,
- &node_online_map, MPOL_MF_STATS, md);
+ mpol_to_str(buffer, sizeof(buffer),
+ get_vma_policy(task, vma, vma->vm_start));
- if (md->pages) {
- mpol_to_str(buffer, sizeof(buffer),
- get_vma_policy(task, vma, vma->vm_start));
+ seq_printf(m, "%08lx %s", vma->vm_start, buffer);
- seq_printf(m, "%08lx %s pages=%lu mapped=%lu maxref=%lu",
- vma->vm_start, buffer, md->pages,
- md->mapped, md->mapcount_max);
+ if (file) {
+ seq_printf(m, " file=");
+ seq_path(m, file->f_vfsmnt, file->f_dentry, "\n\t= ");
+ } else if (vma->vm_start <= mm->brk && vma->vm_end >= mm->start_brk) {
+ seq_printf(m, " heap");
+ } else if (vma->vm_start <= mm->start_stack &&
+ vma->vm_end >= mm->start_stack) {
+ seq_printf(m, " stack");
+ }
- if (md->anon)
- seq_printf(m," anon=%lu",md->anon);
+ if (is_vm_hugetlb_page(vma)) {
+ check_huge_range(vma, vma->vm_start, vma->vm_end, md);
+ seq_printf(m, " huge");
+ } else {
+ check_pgd_range(vma, vma->vm_start, vma->vm_end,
+ &node_online_map, MPOL_MF_STATS, md);
+ }
- for_each_online_node(n)
- if (md->node[n])
- seq_printf(m, " N%d=%lu", n, md->node[n]);
+ if (!md->pages)
+ goto out;
- seq_putc(m, '\n');
- }
+ if (md->anon)
+ seq_printf(m," anon=%lu",md->anon);
+
+ if (md->dirty)
+ seq_printf(m," dirty=%lu",md->dirty);
+
+ if (md->pages != md->anon && md->pages != md->dirty)
+ seq_printf(m, " mapped=%lu", md->pages);
+
+ if (md->mapcount_max > 1)
+ seq_printf(m, " mapmax=%lu", md->mapcount_max);
+
+ if (md->swapcache)
+ seq_printf(m," swapcache=%lu", md->swapcache);
+
+ if (md->active < md->pages && !is_vm_hugetlb_page(vma))
+ seq_printf(m," active=%lu", md->active);
+
+ if (md->writeback)
+ seq_printf(m," writeback=%lu", md->writeback);
+
+ for_each_online_node(n)
+ if (md->node[n])
+ seq_printf(m, " N%d=%lu", n, md->node[n]);
+out:
+ seq_putc(m, '\n');
kfree(md);
if (m->count < m->size)
struct vm_operations_struct generic_file_vm_ops = {
};
-EXPORT_SYMBOL(vmalloc);
EXPORT_SYMBOL(vfree);
EXPORT_SYMBOL(vmalloc_to_page);
EXPORT_SYMBOL(vmalloc_32);
{
return __vmalloc(size, GFP_KERNEL | __GFP_HIGHMEM, PAGE_KERNEL);
}
+EXPORT_SYMBOL(vmalloc);
+
+void *vmalloc_node(unsigned long size, int node)
+{
+ return vmalloc(size);
+}
+EXPORT_SYMBOL(vmalloc_node);
/*
* vmalloc_32 - allocate virtually continguos memory (32bit addressable)
{
struct mm_struct *mm = NULL;
task_t *p;
- unsigned long points;
+ unsigned long points = 0;
if (printk_ratelimit()) {
printk("oom-killer: gfp_mask=0x%x, order=%d\n",
}
out:
+ read_unlock(&tasklist_lock);
cpuset_unlock();
if (mm)
mmput(mm);
* retry to allocate memory unless "p" is current
*/
if (!test_thread_flag(TIF_MEMDIE))
- schedule_timeout_interruptible(1);
+ schedule_timeout_uninterruptible(1);
}
}
#ifdef CONFIG_NUMA
-/* Called from the slab reaper to drain remote pagesets */
-void drain_remote_pages(void)
+/*
+ * Called from the slab reaper to drain pagesets on a particular node that
+ * belong to the currently executing processor.
+ */
+void drain_node_pages(int nodeid)
{
- struct zone *zone;
- int i;
+ int i, z;
unsigned long flags;
local_irq_save(flags);
- for_each_zone(zone) {
+ for (z = 0; z < MAX_NR_ZONES; z++) {
+ struct zone *zone = NODE_DATA(nodeid)->node_zones + z;
struct per_cpu_pageset *pset;
- /* Do not drain local pagesets */
- if (zone->zone_pgdat->node_id == numa_node_id())
- continue;
-
pset = zone_pcp(zone, smp_processor_id());
for (i = 0; i < ARRAY_SIZE(pset->pcp); i++) {
struct per_cpu_pages *pcp;
* through real pte's pointing to valid pages and then releasing
* the page from the swap cache.
*
- * Must hold page lock on page.
+ * Must hold page lock on page and mmap_sem of one vma that contains
+ * the page.
*/
void remove_from_swap(struct page *page)
{
struct anon_vma *anon_vma;
struct vm_area_struct *vma;
+ unsigned long mapping;
- if (!PageAnon(page) || !PageSwapCache(page))
+ if (!PageSwapCache(page))
return;
- anon_vma = page_lock_anon_vma(page);
- if (!anon_vma)
+ mapping = (unsigned long)page->mapping;
+
+ if (!mapping || (mapping & PAGE_MAPPING_ANON) == 0)
return;
+ /*
+ * We hold the mmap_sem lock. So no need to call page_lock_anon_vma.
+ */
+ anon_vma = (struct anon_vma *) (mapping - PAGE_MAPPING_ANON);
+ spin_lock(&anon_vma->lock);
+
list_for_each_entry(vma, &anon_vma->head, anon_vma_node)
remove_vma_swap(vma, page);
spin_unlock(&anon_vma->lock);
-
delete_from_swap_cache(page);
}
EXPORT_SYMBOL(remove_from_swap);
*/
void page_add_file_rmap(struct page *page)
{
- BUG_ON(PageAnon(page));
- BUG_ON(!pfn_valid(page_to_pfn(page)));
-
if (atomic_inc_and_test(&page->_mapcount))
__inc_page_state(nr_mapped);
}
dump_stack();
}
+#ifdef CONFIG_NUMA
+/*
+ * Special reaping functions for NUMA systems called from cache_reap().
+ * These take care of doing round robin flushing of alien caches (containing
+ * objects freed on different nodes from which they were allocated) and the
+ * flushing of remote pcps by calling drain_node_pages.
+ */
+static DEFINE_PER_CPU(unsigned long, reap_node);
+
+static void init_reap_node(int cpu)
+{
+ int node;
+
+ node = next_node(cpu_to_node(cpu), node_online_map);
+ if (node == MAX_NUMNODES)
+ node = 0;
+
+ __get_cpu_var(reap_node) = node;
+}
+
+static void next_reap_node(void)
+{
+ int node = __get_cpu_var(reap_node);
+
+ /*
+ * Also drain per cpu pages on remote zones
+ */
+ if (node != numa_node_id())
+ drain_node_pages(node);
+
+ node = next_node(node, node_online_map);
+ if (unlikely(node >= MAX_NUMNODES))
+ node = first_node(node_online_map);
+ __get_cpu_var(reap_node) = node;
+}
+
+#else
+#define init_reap_node(cpu) do { } while (0)
+#define next_reap_node(void) do { } while (0)
+#endif
+
/*
* Initiate the reap timer running on the target CPU. We run at around 1 to 2Hz
* via the workqueue/eventd.
* at that time.
*/
if (keventd_up() && reap_work->func == NULL) {
+ init_reap_node(cpu);
INIT_WORK(reap_work, cache_reap, NULL);
schedule_delayed_work_on(cpu, reap_work, HZ + 3 * cpu);
}
}
}
+/*
+ * Called from cache_reap() to regularly drain alien caches round robin.
+ */
+static void reap_alien(struct kmem_cache *cachep, struct kmem_list3 *l3)
+{
+ int node = __get_cpu_var(reap_node);
+
+ if (l3->alien) {
+ struct array_cache *ac = l3->alien[node];
+ if (ac && ac->avail) {
+ spin_lock_irq(&ac->lock);
+ __drain_alien_cache(cachep, ac, node);
+ spin_unlock_irq(&ac->lock);
+ }
+ }
+}
+
static void drain_alien_cache(struct kmem_cache *cachep, struct array_cache **alien)
{
int i = 0;
#else
#define drain_alien_cache(cachep, alien) do { } while (0)
+#define reap_alien(cachep, l3) do { } while (0)
static inline struct array_cache **alloc_alien_cache(int node, int limit)
{
struct cache_sizes *sizes;
struct cache_names *names;
int i;
+ int order;
for (i = 0; i < NUM_INIT_LISTS; i++) {
kmem_list3_init(&initkmem_list3[i]);
cache_cache.buffer_size = ALIGN(cache_cache.buffer_size, cache_line_size());
- cache_estimate(0, cache_cache.buffer_size, cache_line_size(), 0,
- &left_over, &cache_cache.num);
+ for (order = 0; order < MAX_ORDER; order++) {
+ cache_estimate(order, cache_cache.buffer_size,
+ cache_line_size(), 0, &left_over, &cache_cache.num);
+ if (cache_cache.num)
+ break;
+ }
if (!cache_cache.num)
BUG();
-
+ cache_cache.gfporder = order;
cache_cache.colour = left_over / cache_cache.colour_off;
cache_cache.slab_size = ALIGN(cache_cache.num * sizeof(kmem_bufctl_t) +
sizeof(struct slab), cache_line_size());
size_t size, size_t align, unsigned long flags)
{
size_t left_over = 0;
+ int gfporder;
- for (;; cachep->gfporder++) {
+ for (gfporder = 0 ; gfporder <= MAX_GFP_ORDER; gfporder++) {
unsigned int num;
size_t remainder;
- if (cachep->gfporder > MAX_GFP_ORDER) {
- cachep->num = 0;
- break;
- }
-
- cache_estimate(cachep->gfporder, size, align, flags,
- &remainder, &num);
+ cache_estimate(gfporder, size, align, flags, &remainder, &num);
if (!num)
continue;
+
/* More than offslab_limit objects will cause problems */
- if (flags & CFLGS_OFF_SLAB && cachep->num > offslab_limit)
+ if ((flags & CFLGS_OFF_SLAB) && num > offslab_limit)
break;
+ /* Found something acceptable - save it away */
cachep->num = num;
+ cachep->gfporder = gfporder;
left_over = remainder;
+ /*
+ * A VFS-reclaimable slab tends to have most allocations
+ * as GFP_NOFS and we really don't want to have to be allocating
+ * higher-order pages when we are unable to shrink dcache.
+ */
+ if (flags & SLAB_RECLAIM_ACCOUNT)
+ break;
+
/*
* Large number of objects is good, but very large slabs are
* currently bad for the gfp()s.
*/
- if (cachep->gfporder >= slab_break_gfp_order)
+ if (gfporder >= slab_break_gfp_order)
break;
- if ((left_over * 8) <= (PAGE_SIZE << cachep->gfporder))
- /* Acceptable internal fragmentation */
+ /*
+ * Acceptable internal fragmentation?
+ */
+ if ((left_over * 8) <= (PAGE_SIZE << gfporder))
break;
}
return left_over;
size = ALIGN(size, align);
- if ((flags & SLAB_RECLAIM_ACCOUNT) && size <= PAGE_SIZE) {
- /*
- * A VFS-reclaimable slab tends to have most allocations
- * as GFP_NOFS and we really don't want to have to be allocating
- * higher-order pages when we are unable to shrink dcache.
- */
- cachep->gfporder = 0;
- cache_estimate(cachep->gfporder, size, align, flags,
- &left_over, &cachep->num);
- } else
- left_over = calculate_slab_order(cachep, size, align, flags);
+ left_over = calculate_slab_order(cachep, size, align, flags);
if (!cachep->num) {
printk("kmem_cache_create: couldn't create cache %s.\n", name);
"slab: Internal list corruption detected in cache '%s'(%d), slabp %p(%d). Hexdump:\n",
cachep->name, cachep->num, slabp, slabp->inuse);
for (i = 0;
- i < sizeof(slabp) + cachep->num * sizeof(kmem_bufctl_t);
+ i < sizeof(*slabp) + cachep->num * sizeof(kmem_bufctl_t);
i++) {
if ((i % 16) == 0)
printk("\n%03x:", i);
check_irq_on();
l3 = searchp->nodelists[numa_node_id()];
- if (l3->alien)
- drain_alien_cache(searchp, l3->alien);
+ reap_alien(searchp, l3);
spin_lock_irq(&l3->list_lock);
drain_array_locked(searchp, cpu_cache_get(searchp), 0,
}
check_irq_on();
mutex_unlock(&cache_chain_mutex);
- drain_remote_pages();
+ next_reap_node();
/* Setup the next iteration */
schedule_delayed_work(&__get_cpu_var(reap_work), REAPTIMEOUT_CPUC);
}
if (count >= FBC_BATCH || count <= -FBC_BATCH) {
spin_lock(&fbc->lock);
fbc->count += count;
+ *pcount = 0;
spin_unlock(&fbc->lock);
- count = 0;
+ } else {
+ *pcount = count;
}
- *pcount = count;
put_cpu();
}
EXPORT_SYMBOL(percpu_counter_mod);
+
+/*
+ * Add up all the per-cpu counts, return the result. This is a more accurate
+ * but much slower version of percpu_counter_read_positive()
+ */
+long percpu_counter_sum(struct percpu_counter *fbc)
+{
+ long ret;
+ int cpu;
+
+ spin_lock(&fbc->lock);
+ ret = fbc->count;
+ for_each_cpu(cpu) {
+ long *pcount = per_cpu_ptr(fbc->counters, cpu);
+ ret += *pcount;
+ }
+ spin_unlock(&fbc->lock);
+ return ret < 0 ? 0 : ret;
+}
+EXPORT_SYMBOL(percpu_counter_sum);
#endif
/*
if (!(gfp_mask & __GFP_WAIT) ||
zone->all_unreclaimable ||
- atomic_read(&zone->reclaim_in_progress) > 0)
+ atomic_read(&zone->reclaim_in_progress) > 0 ||
+ (p->flags & PF_MEMALLOC))
return 0;
node_id = zone->zone_pgdat->node_id;
static void sigd_put_skb(struct sk_buff *skb)
{
#ifdef WAIT_FOR_DEMON
- static unsigned long silence;
DECLARE_WAITQUEUE(wait,current);
add_wait_queue(&sigd_sleep,&wait);
while (!sigd) {
set_current_state(TASK_UNINTERRUPTIBLE);
- if (time_after(jiffies, silence) || silence == 0) {
- printk(KERN_INFO "atmsvc: waiting for signaling demon "
- "...\n");
- silence = (jiffies+30*HZ)|1;
- }
+ DPRINTK("atmsvc: waiting for signaling demon...\n");
schedule();
}
current->state = TASK_RUNNING;
remove_wait_queue(&sigd_sleep,&wait);
#else
if (!sigd) {
- if (net_ratelimit())
- printk(KERN_WARNING "atmsvc: no signaling demon\n");
+ DPRINTK("atmsvc: no signaling demon\n");
kfree_skb(skb);
return;
}
{
struct net_device *dev = arg;
struct net_bridge_port *p;
+ struct net_bridge *br;
rtnl_lock();
p = dev->br_port;
if (!p)
goto done;
-
- if (netif_carrier_ok(p->dev)) {
- u32 cost = port_cost(p->dev);
-
- spin_lock_bh(&p->br->lock);
- if (p->state == BR_STATE_DISABLED) {
- p->path_cost = cost;
- br_stp_enable_port(p);
+ br = p->br;
+
+ if (netif_carrier_ok(dev))
+ p->path_cost = port_cost(dev);
+
+ if (br->dev->flags & IFF_UP) {
+ spin_lock_bh(&br->lock);
+ if (netif_carrier_ok(dev)) {
+ if (p->state == BR_STATE_DISABLED)
+ br_stp_enable_port(p);
+ } else {
+ if (p->state != BR_STATE_DISABLED)
+ br_stp_disable_port(p);
}
- spin_unlock_bh(&p->br->lock);
- } else {
- spin_lock_bh(&p->br->lock);
- if (p->state != BR_STATE_DISABLED)
- br_stp_disable_port(p);
- spin_unlock_bh(&p->br->lock);
+ spin_unlock_bh(&br->lock);
}
done:
rtnl_unlock();
rcu_assign_pointer(dev->br_port, NULL);
+ kobject_uevent(&p->kobj, KOBJ_REMOVE);
kobject_del(&p->kobj);
call_rcu(&p->rcu, destroy_nbp_rcu);
br_init_port(p);
p->state = BR_STATE_DISABLED;
INIT_WORK(&p->carrier_check, port_carrier_check, dev);
- kobject_init(&p->kobj);
+ br_stp_port_timer_init(p);
+ kobject_init(&p->kobj);
kobject_set_name(&p->kobj, SYSFS_BRIDGE_PORT_ATTR);
p->kobj.ktype = &brport_ktype;
p->kobj.parent = &(dev->class_dev.kobj);
p->state = BR_STATE_BLOCKING;
p->topology_change_ack = 0;
p->config_pending = 0;
-
- br_stp_port_timer_init(p);
}
/* called under bridge lock */
# watchers
obj-$(CONFIG_BRIDGE_EBT_LOG) += ebt_log.o
-obj-$(CONFIG_BRIDGE_EBT_LOG) += ebt_ulog.o
+obj-$(CONFIG_BRIDGE_EBT_ULOG) += ebt_ulog.o
li.u.log.level = info->loglevel;
li.u.log.logflags = info->bitmask;
- nf_log_packet(PF_BRIDGE, hooknr, skb, in, out, &li, info->prefix);
+ if (info->bitmask & EBT_LOG_NFLOG)
+ nf_log_packet(PF_BRIDGE, hooknr, skb, in, out, &li,
+ info->prefix);
+ else
+ ebt_log_packet(PF_BRIDGE, hooknr, skb, in, out, &li,
+ info->prefix);
}
static struct ebt_watcher log =
get_random_bytes(&lopt->hash_rnd, sizeof(lopt->hash_rnd));
rwlock_init(&queue->syn_wait_lock);
queue->rskq_accept_head = queue->rskq_accept_head = NULL;
- queue->rskq_defer_accept = 0;
lopt->nr_table_entries = nr_table_entries;
write_lock_bh(&queue->syn_wait_lock);
* net/dccp/ccids/ccid3.c
*
* Copyright (c) 2005 The University of Waikato, Hamilton, New Zealand.
- * Copyright (c) 2005 Ian McDonald <iam4@cs.waikato.ac.nz>
+ * Copyright (c) 2005-6 Ian McDonald <imcdnzl@gmail.com>
*
* An implementation of the DCCP protocol
*
p_prev = hcrx->ccid3hcrx_p;
/* Calculate loss event rate */
- if (!list_empty(&hcrx->ccid3hcrx_li_hist))
+ if (!list_empty(&hcrx->ccid3hcrx_li_hist)) {
+ u32 i_mean = dccp_li_hist_calc_i_mean(&hcrx->ccid3hcrx_li_hist);
+
/* Scaling up by 1000000 as fixed decimal */
- hcrx->ccid3hcrx_p = 1000000 / dccp_li_hist_calc_i_mean(&hcrx->ccid3hcrx_li_hist);
+ if (i_mean != 0)
+ hcrx->ccid3hcrx_p = 1000000 / i_mean;
+ }
if (hcrx->ccid3hcrx_p > p_prev) {
ccid3_hc_rx_send_feedback(sk);
/* dst->last_associate is not overwritten */
}
-static inline int is_beacon(int fc)
+static inline int is_beacon(__le16 fc)
{
return (WLAN_FC_GET_STYPE(le16_to_cpu(fc)) == IEEE80211_STYPE_BEACON);
}
escape_essid(info_element->data,
info_element->len),
MAC_ARG(beacon->header.addr3),
- is_beacon(le16_to_cpu
- (beacon->header.
- frame_ctl)) ?
+ is_beacon(beacon->header.frame_ctl) ?
"BEACON" : "PROBE RESPONSE");
return;
}
escape_essid(network.ssid,
network.ssid_len),
MAC_ARG(network.bssid),
- is_beacon(le16_to_cpu
- (beacon->header.
- frame_ctl)) ?
+ is_beacon(beacon->header.frame_ctl) ?
"BEACON" : "PROBE RESPONSE");
#endif
memcpy(target, &network, sizeof(*target));
escape_essid(target->ssid,
target->ssid_len),
MAC_ARG(target->bssid),
- is_beacon(le16_to_cpu
- (beacon->header.
- frame_ctl)) ?
+ is_beacon(beacon->header.frame_ctl) ?
"BEACON" : "PROBE RESPONSE");
update_network(target, &network);
}
spin_unlock_irqrestore(&ieee->lock, flags);
- if (is_beacon(le16_to_cpu(beacon->header.frame_ctl))) {
+ if (is_beacon(beacon->header.frame_ctl)) {
if (ieee->handle_beacon != NULL)
ieee->handle_beacon(dev, beacon, &network);
} else {
#include <net/protocol.h>
#include <net/udp.h>
-/* decapsulation data for use when post-processing */
-struct esp_decap_data {
- xfrm_address_t saddr;
- __u16 sport;
- __u8 proto;
-};
-
static int esp_output(struct xfrm_state *x, struct sk_buff *skb)
{
int err;
int elen = skb->len - sizeof(struct ip_esp_hdr) - esp->conf.ivlen - alen;
int nfrags;
int encap_len = 0;
+ u8 nexthdr[2];
+ struct scatterlist *sg;
+ u8 workbuf[60];
+ int padlen;
if (!pskb_may_pull(skb, sizeof(struct ip_esp_hdr)))
goto out;
if (esp->conf.ivlen)
crypto_cipher_set_iv(esp->conf.tfm, esph->enc_data, crypto_tfm_alg_ivsize(esp->conf.tfm));
- {
- u8 nexthdr[2];
- struct scatterlist *sg = &esp->sgbuf[0];
- u8 workbuf[60];
- int padlen;
-
- if (unlikely(nfrags > ESP_NUM_FAST_SG)) {
- sg = kmalloc(sizeof(struct scatterlist)*nfrags, GFP_ATOMIC);
- if (!sg)
- goto out;
- }
- skb_to_sgvec(skb, sg, sizeof(struct ip_esp_hdr) + esp->conf.ivlen, elen);
- crypto_cipher_decrypt(esp->conf.tfm, sg, sg, elen);
- if (unlikely(sg != &esp->sgbuf[0]))
- kfree(sg);
-
- if (skb_copy_bits(skb, skb->len-alen-2, nexthdr, 2))
- BUG();
+ sg = &esp->sgbuf[0];
- padlen = nexthdr[0];
- if (padlen+2 >= elen)
+ if (unlikely(nfrags > ESP_NUM_FAST_SG)) {
+ sg = kmalloc(sizeof(struct scatterlist)*nfrags, GFP_ATOMIC);
+ if (!sg)
goto out;
-
- /* ... check padding bits here. Silly. :-) */
-
- if (x->encap && decap && decap->decap_type) {
- struct esp_decap_data *encap_data;
- struct udphdr *uh = (struct udphdr *) (iph+1);
-
- encap_data = (struct esp_decap_data *) (decap->decap_data);
- encap_data->proto = 0;
-
- switch (decap->decap_type) {
- case UDP_ENCAP_ESPINUDP:
- case UDP_ENCAP_ESPINUDP_NON_IKE:
- encap_data->proto = AF_INET;
- encap_data->saddr.a4 = iph->saddr;
- encap_data->sport = uh->source;
- encap_len = (void*)esph - (void*)uh;
- break;
-
- default:
- goto out;
- }
- }
-
- iph->protocol = nexthdr[1];
- pskb_trim(skb, skb->len - alen - padlen - 2);
- memcpy(workbuf, skb->nh.raw, iph->ihl*4);
- skb->h.raw = skb_pull(skb, sizeof(struct ip_esp_hdr) + esp->conf.ivlen);
- skb->nh.raw += encap_len + sizeof(struct ip_esp_hdr) + esp->conf.ivlen;
- memcpy(skb->nh.raw, workbuf, iph->ihl*4);
- skb->nh.iph->tot_len = htons(skb->len);
}
+ skb_to_sgvec(skb, sg, sizeof(struct ip_esp_hdr) + esp->conf.ivlen, elen);
+ crypto_cipher_decrypt(esp->conf.tfm, sg, sg, elen);
+ if (unlikely(sg != &esp->sgbuf[0]))
+ kfree(sg);
- return 0;
+ if (skb_copy_bits(skb, skb->len-alen-2, nexthdr, 2))
+ BUG();
-out:
- return -EINVAL;
-}
+ padlen = nexthdr[0];
+ if (padlen+2 >= elen)
+ goto out;
-static int esp_post_input(struct xfrm_state *x, struct xfrm_decap_state *decap, struct sk_buff *skb)
-{
-
- if (x->encap) {
- struct xfrm_encap_tmpl *encap;
- struct esp_decap_data *decap_data;
+ /* ... check padding bits here. Silly. :-) */
- encap = x->encap;
- decap_data = (struct esp_decap_data *)(decap->decap_data);
+ if (x->encap) {
+ struct xfrm_encap_tmpl *encap = x->encap;
+ struct udphdr *uh;
- /* first, make sure that the decap type == the encap type */
if (encap->encap_type != decap->decap_type)
- return -EINVAL;
+ goto out;
- switch (encap->encap_type) {
- default:
- case UDP_ENCAP_ESPINUDP:
- case UDP_ENCAP_ESPINUDP_NON_IKE:
- /*
- * 1) if the NAT-T peer's IP or port changed then
- * advertize the change to the keying daemon.
- * This is an inbound SA, so just compare
- * SRC ports.
- */
- if (decap_data->proto == AF_INET &&
- (decap_data->saddr.a4 != x->props.saddr.a4 ||
- decap_data->sport != encap->encap_sport)) {
- xfrm_address_t ipaddr;
-
- ipaddr.a4 = decap_data->saddr.a4;
- km_new_mapping(x, &ipaddr, decap_data->sport);
-
- /* XXX: perhaps add an extra
- * policy check here, to see
- * if we should allow or
- * reject a packet from a
- * different source
- * address/port.
- */
- }
-
- /*
- * 2) ignore UDP/TCP checksums in case
- * of NAT-T in Transport Mode, or
- * perform other post-processing fixes
- * as per * draft-ietf-ipsec-udp-encaps-06,
- * section 3.1.2
+ uh = (struct udphdr *)(iph + 1);
+ encap_len = (void*)esph - (void*)uh;
+
+ /*
+ * 1) if the NAT-T peer's IP or port changed then
+ * advertize the change to the keying daemon.
+ * This is an inbound SA, so just compare
+ * SRC ports.
+ */
+ if (iph->saddr != x->props.saddr.a4 ||
+ uh->source != encap->encap_sport) {
+ xfrm_address_t ipaddr;
+
+ ipaddr.a4 = iph->saddr;
+ km_new_mapping(x, &ipaddr, uh->source);
+
+ /* XXX: perhaps add an extra
+ * policy check here, to see
+ * if we should allow or
+ * reject a packet from a
+ * different source
+ * address/port.
*/
- if (!x->props.mode)
- skb->ip_summed = CHECKSUM_UNNECESSARY;
-
- break;
}
+
+ /*
+ * 2) ignore UDP/TCP checksums in case
+ * of NAT-T in Transport Mode, or
+ * perform other post-processing fixes
+ * as per draft-ietf-ipsec-udp-encaps-06,
+ * section 3.1.2
+ */
+ if (!x->props.mode)
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
}
+
+ iph->protocol = nexthdr[1];
+ pskb_trim(skb, skb->len - alen - padlen - 2);
+ memcpy(workbuf, skb->nh.raw, iph->ihl*4);
+ skb->h.raw = skb_pull(skb, sizeof(struct ip_esp_hdr) + esp->conf.ivlen);
+ skb->nh.raw += encap_len + sizeof(struct ip_esp_hdr) + esp->conf.ivlen;
+ memcpy(skb->nh.raw, workbuf, iph->ihl*4);
+ skb->nh.iph->tot_len = htons(skb->len);
+
return 0;
+
+out:
+ return -EINVAL;
}
static u32 esp4_get_max_size(struct xfrm_state *x, int mtu)
.destructor = esp_destroy,
.get_max_size = esp4_get_max_size,
.input = esp_input,
- .post_input = esp_post_input,
.output = esp_output
};
static int __init esp4_init(void)
{
- struct xfrm_decap_state decap;
-
- if (sizeof(struct esp_decap_data) >
- sizeof(decap.decap_data)) {
- extern void decap_data_too_small(void);
-
- decap_data_too_small();
- }
-
if (xfrm_register_type(&esp_type, AF_INET) < 0) {
printk(KERN_INFO "ip esp init: can't add xfrm type\n");
return -EAGAIN;
if (((length > mtu) && (sk->sk_protocol == IPPROTO_UDP)) &&
(rt->u.dst.dev->features & NETIF_F_UFO)) {
- if(ip_ufo_append_data(sk, getfrag, from, length, hh_len,
- fragheaderlen, transhdrlen, mtu, flags))
+ err = ip_ufo_append_data(sk, getfrag, from, length, hh_len,
+ fragheaderlen, transhdrlen, mtu,
+ flags);
+ if (err)
goto error;
-
return 0;
}
struct arpt_table *t;
t = xt_find_table_lock(NF_ARP, entries->name);
- if (t || !IS_ERR(t)) {
+ if (t && !IS_ERR(t)) {
struct xt_table_info *private = t->private;
duprintf("t->private->number = %u\n",
private->number);
write_unlock_bh(&queue_lock);
status = ipq_receive_peer(NLMSG_DATA(nlh), type,
- skblen - NLMSG_LENGTH(0));
+ nlmsglen - NLMSG_LENGTH(0));
if (status < 0)
RCV_SKB_FAIL(status);
li.u.log.level = loginfo->level;
li.u.log.logflags = loginfo->logflags;
- nf_log_packet(PF_INET, hooknum, *pskb, in, out, &li, loginfo->prefix);
+ if (loginfo->logflags & IPT_LOG_NFLOG)
+ nf_log_packet(PF_INET, hooknum, *pskb, in, out, &li,
+ loginfo->prefix);
+ else
+ ipt_log_packet(PF_INET, hooknum, *pskb, in, out, &li,
+ loginfo->prefix);
return IPT_CONTINUE;
}
/* Update AIMD parameters */
if (tp->snd_cwnd > hstcp_aimd_vals[ca->ai].cwnd) {
while (tp->snd_cwnd > hstcp_aimd_vals[ca->ai].cwnd &&
- ca->ai < HSTCP_AIMD_MAX)
+ ca->ai < HSTCP_AIMD_MAX - 1)
ca->ai++;
} else if (tp->snd_cwnd < hstcp_aimd_vals[ca->ai].cwnd) {
while (tp->snd_cwnd > hstcp_aimd_vals[ca->ai].cwnd &&
limit = min(send_win, cong_win);
+ /* If a full-sized TSO skb can be sent, do it. */
+ if (limit >= 65536)
+ return 0;
+
if (sysctl_tcp_tso_win_divisor) {
u32 chunk = min(tp->snd_wnd, tp->snd_cwnd * tp->mss_cache);
int addr_type;
unsigned int attrs;
int matchlen;
- unsigned int scope;
+ int scope;
unsigned int rule;
};
goto out;
memcpy(tmp_hdr, skb->nh.raw, hdr_len);
if (ipv6_clear_mutable_options(skb->nh.ipv6h, hdr_len))
- goto out;
+ goto free_out;
skb->nh.ipv6h->priority = 0;
skb->nh.ipv6h->flow_lbl[0] = 0;
skb->nh.ipv6h->flow_lbl[1] = 0;
struct inet_timewait_sock **twp)
{
struct inet_hashinfo *hinfo = death_row->hashinfo;
- const struct inet_sock *inet = inet_sk(sk);
+ struct inet_sock *inet = inet_sk(sk);
const struct ipv6_pinfo *np = inet6_sk(sk);
const struct in6_addr *daddr = &np->rcv_saddr;
const struct in6_addr *saddr = &np->daddr;
}
unique:
+ /* Must record num and sport now. Otherwise we will see
+ * in hash table socket with a funny identity. */
+ inet->num = lport;
+ inet->sport = htons(lport);
BUG_TRAP(sk_unhashed(sk));
__sk_add_node(sk, &head->chain);
sk->sk_hash = hash;
if (((length > mtu) && (sk->sk_protocol == IPPROTO_UDP)) &&
(rt->u.dst.dev->features & NETIF_F_UFO)) {
- if(ip6_ufo_append_data(sk, getfrag, from, length, hh_len,
- fragheaderlen, transhdrlen, mtu, flags))
+ err = ip6_ufo_append_data(sk, getfrag, from, length, hh_len,
+ fragheaderlen, transhdrlen, mtu,
+ flags);
+ if (err)
goto error;
-
return 0;
}
write_unlock_bh(&queue_lock);
status = ipq_receive_peer(NLMSG_DATA(nlh), type,
- skblen - NLMSG_LENGTH(0));
+ nlmsglen - NLMSG_LENGTH(0));
if (status < 0)
RCV_SKB_FAIL(status);
li.u.log.level = loginfo->level;
li.u.log.logflags = loginfo->logflags;
- nf_log_packet(PF_INET6, hooknum, *pskb, in, out, &li, loginfo->prefix);
+ if (loginfo->logflags & IP6T_LOG_NFLOG)
+ nf_log_packet(PF_INET6, hooknum, *pskb, in, out, &li,
+ loginfo->prefix);
+ else
+ ip6t_log_packet(PF_INET6, hooknum, *pskb, in, out, &li,
+ loginfo->prefix);
return IP6T_CONTINUE;
}
#include <linux/skbuff.h>
#include <linux/netfilter.h>
#include <linux/seq_file.h>
+#include <linux/rcupdate.h>
#include <net/protocol.h>
#include "nf_internals.h"
* for queueing and must reinject all packets it receives, no matter what.
*/
static struct nf_queue_handler *queue_handler[NPROTO];
-static struct nf_queue_rerouter *queue_rerouter;
+static struct nf_queue_rerouter *queue_rerouter[NPROTO];
static DEFINE_RWLOCK(queue_handler_lock);
return -EINVAL;
write_lock_bh(&queue_handler_lock);
- memcpy(&queue_rerouter[pf], rer, sizeof(queue_rerouter[pf]));
+ rcu_assign_pointer(queue_rerouter[pf], rer);
write_unlock_bh(&queue_handler_lock);
return 0;
return -EINVAL;
write_lock_bh(&queue_handler_lock);
- memset(&queue_rerouter[pf], 0, sizeof(queue_rerouter[pf]));
+ rcu_assign_pointer(queue_rerouter[pf], NULL);
write_unlock_bh(&queue_handler_lock);
+ synchronize_rcu();
return 0;
}
EXPORT_SYMBOL_GPL(nf_unregister_queue_rerouter);
struct net_device *physindev = NULL;
struct net_device *physoutdev = NULL;
#endif
+ struct nf_queue_rerouter *rerouter;
/* QUEUE == DROP if noone is waiting, to be safe. */
read_lock(&queue_handler_lock);
- if (!queue_handler[pf] || !queue_handler[pf]->outfn) {
+ if (!queue_handler[pf]) {
read_unlock(&queue_handler_lock);
kfree_skb(*skb);
return 1;
}
- info = kmalloc(sizeof(*info)+queue_rerouter[pf].rer_size, GFP_ATOMIC);
+ info = kmalloc(sizeof(*info)+queue_rerouter[pf]->rer_size, GFP_ATOMIC);
if (!info) {
if (net_ratelimit())
printk(KERN_ERR "OOM queueing packet %p\n",
if (physoutdev) dev_hold(physoutdev);
}
#endif
- if (queue_rerouter[pf].save)
- queue_rerouter[pf].save(*skb, info);
+ rerouter = rcu_dereference(queue_rerouter[pf]);
+ if (rerouter)
+ rerouter->save(*skb, info);
status = queue_handler[pf]->outfn(*skb, info, queuenum,
queue_handler[pf]->data);
- if (status >= 0 && queue_rerouter[pf].reroute)
- status = queue_rerouter[pf].reroute(skb, info);
-
read_unlock(&queue_handler_lock);
if (status < 0) {
{
struct list_head *elem = &info->elem->list;
struct list_head *i;
+ struct nf_queue_rerouter *rerouter;
rcu_read_lock();
break;
}
- if (elem == &nf_hooks[info->pf][info->hook]) {
+ if (i == &nf_hooks[info->pf][info->hook]) {
/* The module which sent it to userspace is gone. */
NFDEBUG("%s: module disappeared, dropping packet.\n",
__FUNCTION__);
verdict = NF_ACCEPT;
}
+ if (verdict == NF_ACCEPT) {
+ rerouter = rcu_dereference(queue_rerouter[info->pf]);
+ if (rerouter && rerouter->reroute(&skb, info) < 0)
+ verdict = NF_DROP;
+ }
+
if (verdict == NF_ACCEPT) {
next_hook:
verdict = nf_iterate(&nf_hooks[info->pf][info->hook],
{
#ifdef CONFIG_PROC_FS
struct proc_dir_entry *pde;
-#endif
- queue_rerouter = kmalloc(NPROTO * sizeof(struct nf_queue_rerouter),
- GFP_KERNEL);
- if (!queue_rerouter)
- return -ENOMEM;
-#ifdef CONFIG_PROC_FS
pde = create_proc_entry("nf_queue", S_IRUGO, proc_net_netfilter);
- if (!pde) {
- kfree(queue_rerouter);
+ if (!pde)
return -1;
- }
pde->proc_fops = &nfqueue_file_ops;
#endif
- memset(queue_rerouter, 0, NPROTO * sizeof(struct nf_queue_rerouter));
-
return 0;
}
if (nfqa[NFQA_CFG_PARAMS-1]) {
struct nfqnl_msg_config_params *params;
- params = NFA_DATA(nfqa[NFQA_CFG_PARAMS-1]);
+ if (!queue) {
+ ret = -ENOENT;
+ goto out_put;
+ }
+ params = NFA_DATA(nfqa[NFQA_CFG_PARAMS-1]);
nfqnl_set_mode(queue, params->copy_mode,
ntohl(params->copy_range));
}
msg->msg_namelen = sizeof(*addr);
}
+ if (nlk->flags & NETLINK_RECV_PKTINFO)
+ netlink_cmsg_recv_pktinfo(msg, skb);
+
if (NULL == siocb->scm) {
memset(&scm, 0, sizeof(scm));
siocb->scm = &scm;
netlink_dump(sk);
scm_recv(sock, msg, siocb->scm, flags);
- if (nlk->flags & NETLINK_RECV_PKTINFO)
- netlink_cmsg_recv_pktinfo(msg, skb);
out:
netlink_rcv_wake(sk);
rtattr_failure:
nlmsg_failure:
- skb_trim(skb, b - skb->data);
+ kfree_skb(skb);
return -1;
}
err = -EINVAL;
if (!xprt)
- goto out_err;
+ goto out_no_xprt;
if (vers >= program->nrvers || !(version = program->version[vers]))
goto out_err;
kfree(clnt);
out_err:
xprt_destroy(xprt);
+out_no_xprt:
return ERR_PTR(err);
}
*/
void rpc_wake_up(struct rpc_wait_queue *queue)
{
- struct rpc_task *task;
-
+ struct rpc_task *task, *next;
struct list_head *head;
+
spin_lock_bh(&queue->lock);
head = &queue->tasks[queue->maxpriority];
for (;;) {
- while (!list_empty(head)) {
- task = list_entry(head->next, struct rpc_task, u.tk_wait.list);
+ list_for_each_entry_safe(task, next, head, u.tk_wait.list)
__rpc_wake_up_task(task);
- }
if (head == &queue->tasks[0])
break;
head--;
*/
void rpc_wake_up_status(struct rpc_wait_queue *queue, int status)
{
+ struct rpc_task *task, *next;
struct list_head *head;
- struct rpc_task *task;
spin_lock_bh(&queue->lock);
head = &queue->tasks[queue->maxpriority];
for (;;) {
- while (!list_empty(head)) {
- task = list_entry(head->next, struct rpc_task, u.tk_wait.list);
+ list_for_each_entry_safe(task, next, head, u.tk_wait.list) {
task->tk_status = status;
__rpc_wake_up_task(task);
}
struct sock *sk = NULL;
struct unix_sock *u;
- if (atomic_read(&unix_nr_socks) >= 2*files_stat.max_files)
+ if (atomic_read(&unix_nr_socks) >= 2*get_max_files())
goto out;
sk = sk_alloc(PF_UNIX, GFP_KERNEL, &unix_proto, 1);
struct sec_decap_state *xvec = &(skb->sp->x[i]);
if (!xfrm_selector_match(&xvec->xvec->sel, &fl, family))
return 0;
-
- /* If there is a post_input processor, try running it */
- if (xvec->xvec->type->post_input &&
- (xvec->xvec->type->post_input)(xvec->xvec,
- &(xvec->decap),
- skb) != 0)
- return 0;
}
}
id->cu_model);
ADD(alias, "dt", id->match_flags&CCW_DEVICE_ID_MATCH_DEVICE_TYPE,
id->dev_type);
- ADD(alias, "dm", id->match_flags&CCW_DEVICE_ID_MATCH_DEVICE_TYPE,
+ ADD(alias, "dm", id->match_flags&CCW_DEVICE_ID_MATCH_DEVICE_MODEL,
id->dev_model);
return 1;
}
rc = task_has_perm(parent, child, PROCESS__PTRACE);
/* Save the SID of the tracing process for later use in apply_creds. */
- if (!rc)
+ if (!(child->ptrace & PT_PTRACED) && !rc)
csec->ptrace_sid = psec->sid;
return rc;
}
kctl.private_free = snd_ctl_elem_user_free;
_kctl = snd_ctl_new(&kctl, access);
if (_kctl == NULL) {
- kfree(_kctl->private_data);
+ kfree(ue);
return -ENOMEM;
}
_kctl->private_data = ue;
for (idx = 0; idx < _kctl->count; idx++)
_kctl->vd[idx].owner = file;
err = snd_ctl_add(card, _kctl);
- if (err < 0) {
- snd_ctl_free_one(_kctl);
+ if (err < 0)
return err;
- }
down_write(&card->controls_rwsem);
card->user_ctl_count++;
projects / linux-2.6-microblaze.git / commitdiff