ARM: pxa/lubbock: switch PCMCIA to MAX1600 library

As Lubbock now provides GPIOs via gpiolib for controlling the socket
power, we can use the MAX1600 driver.  Switch Lubbock to use this
driver, which simplifies the code.

Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index fe2ef9b..8e24455 100644 (file)
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -136,10 +136,26 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = {
        // no D+ pullup; lubbock can't connect/disconnect in software
 };
 
+/* GPIOs for SA1111 PCMCIA */
+static struct gpiod_lookup_table sa1111_pcmcia_gpio_table = {
+       .dev_id = "1800",
+       .table = {
+               { "sa1111", 0, "a0vpp", GPIO_ACTIVE_HIGH },
+               { "sa1111", 1, "a1vpp", GPIO_ACTIVE_HIGH },
+               { "sa1111", 2, "a0vcc", GPIO_ACTIVE_HIGH },
+               { "sa1111", 3, "a1vcc", GPIO_ACTIVE_HIGH },
+               { "lubbock", 14, "b0vcc", GPIO_ACTIVE_HIGH },
+               { "lubbock", 15, "b1vcc", GPIO_ACTIVE_HIGH },
+               { },
+       },
+};
+
 static void lubbock_init_pcmcia(void)
 {
        struct clk *clk;
 
+       gpiod_add_lookup_table(&sa1111_pcmcia_gpio_table);
+
        /* Add an alias for the SA1111 PCMCIA clock */
        clk = clk_get_sys("pxa2xx-pcmcia", NULL);
        if (!IS_ERR(clk)) {

diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index 9ac3d4a..d687a76 100644 (file)
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -195,6 +195,7 @@ config PCMCIA_SA1111
        select PCMCIA_SA11XX_BASE if ARCH_SA1100
        select PCMCIA_PXA2XX if ARCH_LUBBOCK && SA1111
        select PCMCIA_MAX1600 if ASSABET_NEPONSET
+       select PCMCIA_MAX1600 if ARCH_LUBBOCK && SA1111
        help
          Say Y  here to include support for SA1111-based PCMCIA or CF
          sockets, found on the Jornada 720, Graphicsmaster and other

diff --git a/drivers/pcmcia/sa1111_lubbock.c b/drivers/pcmcia/sa1111_lubbock.c
index e741f49..e3fc14c 100644 (file)
--- a/drivers/pcmcia/sa1111_lubbock.c
+++ b/drivers/pcmcia/sa1111_lubbock.c
@@ -24,20 +24,31 @@
 #include <mach/hardware.h>
 #include <asm/hardware/sa1111.h>
 #include <asm/mach-types.h>
-#include <mach/lubbock.h>
 
 #include "sa1111_generic.h"
+#include "max1600.h"
+
+static int lubbock_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+       struct max1600 *m;
+       int ret;
+
+       ret = max1600_init(skt->socket.dev.parent, &m,
+                          skt->nr ? MAX1600_CHAN_B : MAX1600_CHAN_A,
+                          MAX1600_CODE_HIGH);
+       if (ret == 0)
+               skt->driver_data = m;
+
+       return ret;
+}
 
 static int
 lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
                                const socket_state_t *state)
 {
-       struct sa1111_pcmcia_socket *s = to_skt(skt);
-       unsigned int pa_dwr_mask, pa_dwr_set, misc_mask, misc_set;
+       struct max1600 *m = skt->driver_data;
        int ret = 0;
 
-       pa_dwr_mask = pa_dwr_set = misc_mask = misc_set = 0;
-
        /* Lubbock uses the Maxim MAX1602, with the following connections:
         *
         * Socket 0 (PCMCIA):
@@ -71,74 +82,7 @@ lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
  again:
        switch (skt->nr) {
        case 0:
-               pa_dwr_mask = GPIO_A0 | GPIO_A1 | GPIO_A2 | GPIO_A3;
-
-               switch (state->Vcc) {
-               case 0: /* Hi-Z */
-                       break;
-
-               case 33: /* VY */
-                       pa_dwr_set |= GPIO_A3;
-                       break;
-
-               case 50: /* VX */
-                       pa_dwr_set |= GPIO_A2;
-                       break;
-
-               default:
-                       printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
-                              __func__, state->Vcc);
-                       ret = -1;
-               }
-
-               switch (state->Vpp) {
-               case 0: /* Hi-Z */
-                       break;
-
-               case 120: /* 12IN */
-                       pa_dwr_set |= GPIO_A1;
-                       break;
-
-               default: /* VCC */
-                       if (state->Vpp == state->Vcc)
-                               pa_dwr_set |= GPIO_A0;
-                       else {
-                               printk(KERN_ERR "%s(): unrecognized Vpp %u\n",
-                                      __func__, state->Vpp);
-                               ret = -1;
-                               break;
-                       }
-               }
-               break;
-
        case 1:
-               misc_mask = (1 << 15) | (1 << 14);
-
-               switch (state->Vcc) {
-               case 0: /* Hi-Z */
-                       break;
-
-               case 33: /* VY */
-                       misc_set |= 1 << 15;
-                       break;
-
-               case 50: /* VX */
-                       misc_set |= 1 << 14;
-                       break;
-
-               default:
-                       printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
-                              __func__, state->Vcc);
-                       ret = -1;
-                       break;
-               }
-
-               if (state->Vpp != state->Vcc && state->Vpp != 0) {
-                       printk(KERN_ERR "%s(): CF slot cannot support Vpp %u\n",
-                              __func__, state->Vpp);
-                       ret = -1;
-                       break;
-               }
                break;
 
        default:
@@ -147,11 +91,8 @@ lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 
        if (ret == 0)
                ret = sa1111_pcmcia_configure_socket(skt, state);
-
-       if (ret == 0) {
-               lubbock_set_misc_wr(misc_mask, misc_set);
-               sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set);
-       }
+       if (ret == 0)
+               ret = max1600_configure(m, state->Vcc, state->Vpp);
 
 #if 1
        if (ret == 0 && state->Vcc == 33) {
@@ -175,8 +116,7 @@ lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
                        /*
                         * Switch to 5V,  Configure socket with 5V voltage
                         */
-                       lubbock_set_misc_wr(misc_mask, 0);
-                       sa1111_set_io(s->dev, pa_dwr_mask, 0);
+                       max1600_configure(m, 0, 0);
 
                        /*
                         * It takes about 100ms to turn off Vcc.
@@ -201,6 +141,7 @@ lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 
 static struct pcmcia_low_level lubbock_pcmcia_ops = {
        .owner                  = THIS_MODULE,
+       .hw_init                = lubbock_pcmcia_hw_init,
        .configure_socket       = lubbock_pcmcia_configure_socket,
        .first                  = 0,
        .nr                     = 2,
@@ -210,17 +151,6 @@ static struct pcmcia_low_level lubbock_pcmcia_ops = {
 
 int pcmcia_lubbock_init(struct sa1111_dev *sadev)
 {
-       /*
-        * Set GPIO_A<3:0> to be outputs for the MAX1600,
-        * and switch to standby mode.
-        */
-       sa1111_set_io_dir(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0);
-       sa1111_set_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
-       sa1111_set_sleep_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
-
-       /* Set CF Socket 1 power to standby mode. */
-       lubbock_set_misc_wr((1 << 15) | (1 << 14), 0);
-
        pxa2xx_drv_pcmcia_ops(&lubbock_pcmcia_ops);
        pxa2xx_configure_sockets(&sadev->dev, &lubbock_pcmcia_ops);
        return sa1111_pcmcia_add(sadev, &lubbock_pcmcia_ops,