dt-bindings: phy: ti: phy-gmii-sel: convert bindings to json-schema

Convert the CPSW Port's Interface Mode Selection PHY bindings documentation
to json-schema.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20200721225247.31034-1-grygorii.strashko@ti.com
Signed-off-by: Rob Herring <robh@kernel.org>

diff --git a/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml b/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml
new file mode 100644 (file)
index 0000000..bcec422
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/ti,phy-gmii-sel.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: CPSW Port's Interface Mode Selection PHY Tree Bindings
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+
+description: |
+  TI am335x/am437x/dra7(am5)/dm814x CPSW3G Ethernet Subsystem supports
+  two 10/100/1000 Ethernet ports with selectable G/MII, RMII, and RGMII interfaces.
+  The interface mode is selected by configuring the MII mode selection register(s)
+  (GMII_SEL) in the System Control Module chapter (SCM). GMII_SEL register(s) and
+  bit fields placement in SCM are different between SoCs while fields meaning
+  is the same.
+                                               +--------------+
+        +-------------------------------+      |SCM           |
+        |                     CPSW      |      |  +---------+ |
+        |        +--------------------------------+gmii_sel | |
+        |        |                      |      |  +---------+ |
+        |   +----v---+     +--------+   |      +--------------+
+        |   |Port 1..<--+-->GMII/MII<------->
+        |   |        |  |  |        |   |
+        |   +--------+  |  +--------+   |
+        |               |               |
+        |               |  +--------+   |
+        |               |  | RMII   <------->
+        |               +-->        |   |
+        |               |  +--------+   |
+        |               |               |
+        |               |  +--------+   |
+        |               |  | RGMII  <------->
+        |               +-->        |   |
+        |                  +--------+   |
+        +-------------------------------+
+
+  CPSW Port's Interface Mode Selection PHY describes MII interface mode between
+  CPSW Port and Ethernet PHY which depends on Eth PHY and board configuration.
+  |
+  CPSW Port's Interface Mode Selection PHY device should defined as child device
+  of SCM node (scm_conf) and can be attached to each CPSW port node using standard
+  PHY bindings.
+
+properties:
+  compatible:
+    enum:
+      - ti,am3352-phy-gmii-sel
+      - ti,dra7xx-phy-gmii-sel
+      - ti,am43xx-phy-gmii-sel
+      - ti,dm814-phy-gmii-sel
+      - ti,am654-phy-gmii-sel
+
+  reg:
+    description: Address and length of the register set for the device
+
+  '#phy-cells': true
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,dra7xx-phy-gmii-sel
+              - ti,dm814-phy-gmii-sel
+              - ti,am654-phy-gmii-sel
+    then:
+      properties:
+        '#phy-cells':
+          const: 1
+          description: CPSW port number (starting from 1)
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,am3352-phy-gmii-sel
+              - ti,am43xx-phy-gmii-sel
+    then:
+      properties:
+        '#phy-cells':
+          const: 2
+          description: |
+            - CPSW port number (starting from 1)
+            - RMII refclk mode
+
+required:
+  - compatible
+  - reg
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    phy_gmii_sel: phy-gmii-sel@650 {
+        compatible = "ti,am3352-phy-gmii-sel";
+        reg = <0x650 0x4>;
+        #phy-cells = <2>;
+    };

diff --git a/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt b/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt
deleted file mode 100644 (file)
index 83b78c1..0000000
--- a/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt
+++ /dev/null
@@ -1,69 +0,0 @@
-CPSW Port's Interface Mode Selection PHY Tree Bindings
------------------------------------------------
-
-TI am335x/am437x/dra7(am5)/dm814x CPSW3G Ethernet Subsystem supports
-two 10/100/1000 Ethernet ports with selectable G/MII, RMII, and RGMII interfaces.
-The interface mode is selected by configuring the MII mode selection register(s)
-(GMII_SEL) in the System Control Module chapter (SCM). GMII_SEL register(s) and
-bit fields placement in SCM are different between SoCs while fields meaning
-is the same.
-                                               +--------------+
-        +-------------------------------+      |SCM           |
-        |                     CPSW      |      |  +---------+ |
-        |        +--------------------------------+gmii_sel | |
-        |        |                      |      |  +---------+ |
-        |   +----v---+     +--------+   |      +--------------+
-        |   |Port 1..<--+-->GMII/MII<------->
-        |   |        |  |  |        |   |
-        |   +--------+  |  +--------+   |
-        |               |               |
-        |               |  +--------+   |
-        |               |  | RMII   <------->
-        |               +-->        |   |
-        |               |  +--------+   |
-        |               |               |
-        |               |  +--------+   |
-        |               |  | RGMII  <------->
-        |               +-->        |   |
-        |                  +--------+   |
-        +-------------------------------+
-
-CPSW Port's Interface Mode Selection PHY describes MII interface mode between
-CPSW Port and Ethernet PHY which depends on Eth PHY and board configuration.
-
-CPSW Port's Interface Mode Selection PHY device should defined as child device
-of SCM node (scm_conf) and can be attached to each CPSW port node using standard
-PHY bindings (See phy/phy-bindings.txt).
-
-Required properties:
-- compatible           : Should be "ti,am3352-phy-gmii-sel" for am335x platform
-                         "ti,dra7xx-phy-gmii-sel" for dra7xx/am57xx platform
-                         "ti,am43xx-phy-gmii-sel" for am43xx platform
-                         "ti,dm814-phy-gmii-sel" for dm814x platform
-                         "ti,am654-phy-gmii-sel" for AM654x/J721E platform
-- reg                  : Address and length of the register set for the device
-- #phy-cells           : must be 2.
-                         cell 1 - CPSW port number (starting from 1)
-                         cell 2 - RMII refclk mode
-
-Examples:
-       phy_gmii_sel: phy-gmii-sel {
-               compatible = "ti,am3352-phy-gmii-sel";
-               reg = <0x650 0x4>;
-               #phy-cells = <2>;
-       };
-
-       mac: ethernet@4a100000 {
-               compatible = "ti,am335x-cpsw","ti,cpsw";
-               ...
-
-               cpsw_emac0: slave@4a100200 {
-                       ...
-                       phys = <&phy_gmii_sel 1 1>;
-               };
-
-               cpsw_emac1: slave@4a100300 {
-                       ...
-                       phys = <&phy_gmii_sel 2 1>;
-               };
-       };