A few more DT patches for 5.5, mostly:
- USB3 support for the H6
- Deinterlacer support for the H3
- eDP Bridge support on the Teres-I
- More DT cleanups thanks to the validation
* tag 'sunxi-dt-for-5.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h6: Remove useless reset name
ARM: dts: sun6i: Remove useless reset-names
arm64: dts: allwinner: orange-pi-3: Enable USB 3.0 host support
arm64: dts: allwinner: h6: add USB3 device nodes
dt-bindings: Add ANX6345 DP/eDP transmitter binding
arm64: dts: allwinner: a64: enable ANX6345 bridge on Teres-I
dts: arm: sun8i: h3: Enable deinterlace unit
ARM: dts: sunxi: h3/h5: Add MBUS controller node
dt-bindings: bus: sunxi: Add H3 MBUS compatible
Link: https://lore.kernel.org/r/58ad00a8-9579-4811-969a-a74e331ee9a2.lettre@localhost
Signed-off-by: Olof Johansson <olof@lixom.net>
Required properties:
- compatible: Must be one of:
- allwinner,sun5i-a13-mbus
+ - allwinner,sun8i-h3-mbus
- reg: Offset and length of the register set for the controller
- clocks: phandle to the clock driving the controller
- dma-ranges: See section 2.3.9 of the DeviceTree Specification
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/anx6345.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analogix ANX6345 eDP Transmitter Device Tree Bindings
+
+maintainers:
+ - Torsten Duwe <duwe@lst.de>
+
+description: |
+ The ANX6345 is an ultra-low power Full-HD eDP transmitter designed for
+ portable devices.
+
+properties:
+ compatible:
+ const: analogix,anx6345
+
+ reg:
+ maxItems: 1
+ description: base I2C address of the device
+
+ reset-gpios:
+ maxItems: 1
+ description: GPIO connected to active low reset
+
+ dvdd12-supply:
+ maxItems: 1
+ description: Regulator for 1.2V digital core power.
+
+ dvdd25-supply:
+ maxItems: 1
+ description: Regulator for 2.5V digital core power.
+
+ ports:
+ type: object
+
+ properties:
+ port@0:
+ type: object
+ description: |
+ Video port for LVTTL input
+
+ port@1:
+ type: object
+ description: |
+ Video port for eDP output (panel or connector).
+ May be omitted if EDID works reliably.
+
+ required:
+ - port@0
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+ - dvdd12-supply
+ - dvdd25-supply
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ anx6345: anx6345@38 {
+ compatible = "analogix,anx6345";
+ reg = <0x38>;
+ reset-gpios = <&pio42 1 /* GPIO_ACTIVE_LOW */>;
+ dvdd25-supply = <®_dldo2>;
+ dvdd12-supply = <®_fldo1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ anx6345_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ anx6345_in_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_out_anx6345>;
+ };
+ };
+
+ anx6345_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ anx6345_out_panel: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_in_edp>;
+ };
+ };
+ };
+ };
+ };
<&ccu CLK_PLL_VIDEO1_2X>;
clock-names = "ahb", "mod", "ddc", "pll-0", "pll-1";
resets = <&ccu RST_AHB1_HDMI>;
- reset-names = "ahb";
dma-names = "ddc-tx", "ddc-rx", "audio-tx";
dmas = <&dma 13>, <&dma 13>, <&dma 14>;
status = "disabled";
};
soc {
+ deinterlace: deinterlace@1400000 {
+ compatible = "allwinner,sun8i-h3-deinterlace";
+ reg = <0x01400000 0x20000>;
+ clocks = <&ccu CLK_BUS_DEINTERLACE>,
+ <&ccu CLK_DEINTERLACE>,
+ <&ccu CLK_DRAM_DEINTERLACE>;
+ clock-names = "bus", "mod", "ram";
+ resets = <&ccu RST_BUS_DEINTERLACE>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&mbus 9>;
+ interconnect-names = "dma-mem";
+ };
+
syscon: system-control@1c00000 {
compatible = "allwinner,sun8i-h3-system-control";
reg = <0x01c00000 0x1000>;
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
+ dma-ranges;
ranges;
display_clocks: clock@1000000 {
};
};
+ mbus: dram-controller@1c62000 {
+ compatible = "allwinner,sun8i-h3-mbus";
+ reg = <0x01c62000 0x1000>;
+ clocks = <&ccu 113>;
+ dma-ranges = <0x00000000 0x40000000 0xc0000000>;
+ #interconnect-cells = <1>;
+ };
+
spi0: spi@1c68000 {
compatible = "allwinner,sun8i-h3-spi";
reg = <0x01c68000 0x1000>;
status = "okay";
};
+&de {
+ status = "okay";
+};
+
&ehci1 {
status = "okay";
};
-/* The ANX6345 eDP-bridge is on i2c0. There is no linux (mainline)
- * driver for this chip at the moment, the bootloader initializes it.
- * However it can be accessed with the i2c-dev driver from user space.
- */
&i2c0 {
clock-frequency = <100000>;
status = "okay";
+
+ anx6345: anx6345@38 {
+ compatible = "analogix,anx6345";
+ reg = <0x38>;
+ reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
+ dvdd25-supply = <®_dldo2>;
+ dvdd12-supply = <®_dldo3>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ anx6345_in: endpoint {
+ remote-endpoint = <&tcon0_out_anx6345>;
+ };
+ };
+ };
+ };
+};
+
+&mixer0 {
+ status = "okay";
};
&mmc0 {
status = "okay";
};
+&tcon0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_rgb666_pins>;
+
+ status = "okay";
+};
+
+&tcon0_out {
+ tcon0_out_anx6345: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&anx6345_in>;
+ };
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
+&dwc3 {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
usb3_vbus-supply = <®_vcc5v>;
status = "okay";
};
+
+&usb3phy {
+ status = "okay";
+};
status = "disabled";
};
+ dwc3: dwc3@5200000 {
+ compatible = "snps,dwc3";
+ reg = <0x05200000 0x10000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_XHCI>,
+ <&ccu CLK_BUS_XHCI>,
+ <&rtc 0>;
+ clock-names = "ref", "bus_early", "suspend";
+ resets = <&ccu RST_BUS_XHCI>;
+ /*
+ * The datasheet of the chip doesn't declare the
+ * peripheral function, and there's no boards known
+ * to have a USB Type-B port routed to the port.
+ * In addition, no one has tested the peripheral
+ * function yet.
+ * So set the dr_mode to "host" in the DTSI file.
+ */
+ dr_mode = "host";
+ phys = <&usb3phy>;
+ phy-names = "usb3-phy";
+ status = "disabled";
+ };
+
+ usb3phy: phy@5210000 {
+ compatible = "allwinner,sun50i-h6-usb3-phy";
+ reg = <0x5210000 0x10000>;
+ clocks = <&ccu CLK_USB_PHY1>;
+ resets = <&ccu RST_USB_PHY1>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
ehci3: usb@5311000 {
compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
reg = <0x05311000 0x100>;
"tcon-tv0";
clock-output-names = "tcon-top-tv0";
resets = <&ccu RST_BUS_TCON_TOP>;
- reset-names = "rst";
#clock-cells = <1>;
ports {
projects / linux-2.6-microblaze.git / commitdiff