tristate "Analog Devices AD7606 ADC driver with spi interface support"
depends on SPI
select AD7606
+ select IIO_BUFFER_DMAENGINE
+ select SPI_OFFLOAD
help
Say yes here to build spi interface support for Analog Devices:
ad7605-4, ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC).
.oversampling_avail = ad7606_oversampling_avail,
.oversampling_num = ARRAY_SIZE(ad7606_oversampling_avail),
.scale_setup_cb = ad7606_16bit_chan_scale_setup,
+ .offload_storagebits = 32,
};
EXPORT_SYMBOL_NS_GPL(ad7606_6_info, "IIO_AD7606");
.oversampling_avail = ad7606_oversampling_avail,
.oversampling_num = ARRAY_SIZE(ad7606_oversampling_avail),
.scale_setup_cb = ad7606_16bit_chan_scale_setup,
+ .offload_storagebits = 32,
};
EXPORT_SYMBOL_NS_GPL(ad7606_4_info, "IIO_AD7606");
.oversampling_num = ARRAY_SIZE(ad7606_oversampling_avail),
.scale_setup_cb = ad7606_16bit_chan_scale_setup,
.sw_setup_cb = ad7606b_sw_mode_setup,
+ .offload_storagebits = 32,
};
EXPORT_SYMBOL_NS_GPL(ad7606b_info, "IIO_AD7606");
.oversampling_num = ARRAY_SIZE(ad7606_oversampling_avail),
.scale_setup_cb = ad7606c_16bit_chan_scale_setup,
.sw_setup_cb = ad7606b_sw_mode_setup,
+ .offload_storagebits = 32,
};
EXPORT_SYMBOL_NS_GPL(ad7606c_16_info, "IIO_AD7606");
.oversampling_avail = ad7606_oversampling_avail,
.oversampling_num = ARRAY_SIZE(ad7606_oversampling_avail),
.scale_setup_cb = ad7607_chan_scale_setup,
+ .offload_storagebits = 32,
};
EXPORT_SYMBOL_NS_GPL(ad7607_info, "IIO_AD7606");
.oversampling_avail = ad7606_oversampling_avail,
.oversampling_num = ARRAY_SIZE(ad7606_oversampling_avail),
.scale_setup_cb = ad7608_chan_scale_setup,
+ .offload_storagebits = 32,
};
EXPORT_SYMBOL_NS_GPL(ad7608_info, "IIO_AD7606");
.oversampling_avail = ad7606_oversampling_avail,
.oversampling_num = ARRAY_SIZE(ad7606_oversampling_avail),
.scale_setup_cb = ad7609_chan_scale_setup,
+ .offload_storagebits = 32,
};
EXPORT_SYMBOL_NS_GPL(ad7609_info, "IIO_AD7606");
.oversampling_num = ARRAY_SIZE(ad7606_oversampling_avail),
.scale_setup_cb = ad7606c_18bit_chan_scale_setup,
.sw_setup_cb = ad7606b_sw_mode_setup,
+ .offload_storagebits = 32,
};
EXPORT_SYMBOL_NS_GPL(ad7606c_18_info, "IIO_AD7606");
.os_req_reset = true,
.scale_setup_cb = ad7606_16bit_chan_scale_setup,
.sw_setup_cb = ad7616_sw_mode_setup,
+ .offload_storagebits = 16,
};
EXPORT_SYMBOL_NS_GPL(ad7616_info, "IIO_AD7606");
return ret;
}
-static int ad7606_pwm_set_low(struct ad7606_state *st)
+int ad7606_pwm_set_low(struct ad7606_state *st)
{
struct pwm_state cnvst_pwm_state;
int ret;
return ret;
}
+EXPORT_SYMBOL_NS_GPL(ad7606_pwm_set_low, "IIO_AD7606");
-static int ad7606_pwm_set_swing(struct ad7606_state *st)
+int ad7606_pwm_set_swing(struct ad7606_state *st)
{
struct pwm_state cnvst_pwm_state;
return pwm_apply_might_sleep(st->cnvst_pwm, &cnvst_pwm_state);
}
+EXPORT_SYMBOL_NS_GPL(ad7606_pwm_set_swing, "IIO_AD7606");
static bool ad7606_pwm_is_swinging(struct ad7606_state *st)
{
* will not happen because IIO_CHAN_INFO_RAW is not supported for the backend.
* TODO: Add support for reading a single value when the backend is used.
*/
- if (!st->back) {
+ if (st->trig) {
ret = wait_for_completion_timeout(&st->completion,
msecs_to_jiffies(1000));
if (!ret) {
goto error_ret;
}
} else {
- fsleep(1);
+ /*
+ * If the BUSY interrupt is not available, wait enough time for
+ * the longest possible conversion (max for the whole family is
+ * around 350us).
+ */
+ fsleep(400);
}
ret = ad7606_read_samples(st);
*val = st->oversampling;
return IIO_VAL_INT;
case IIO_CHAN_INFO_SAMP_FREQ:
- /*
- * TODO: return the real frequency intead of the requested one once
- * pwm_get_state_hw comes upstream.
- */
pwm_get_state(st->cnvst_pwm, &cnvst_pwm_state);
*val = DIV_ROUND_CLOSEST_ULL(NSEC_PER_SEC, cnvst_pwm_state.period);
return IIO_VAL_INT;
bool slow_bus;
int ret, i;
- slow_bus = !st->bops->iio_backend_config;
+ slow_bus = !(st->bops->iio_backend_config || st->offload_en);
indio_dev->num_channels = st->chip_info->num_adc_channels;
/* Slow buses also get 1 more channel for soft timestamp */
chan->scan_index = i;
chan->scan_type.sign = 's';
chan->scan_type.realbits = st->chip_info->bits;
- chan->scan_type.storagebits = st->chip_info->bits > 16 ? 32 : 16;
+ /*
+ * If in SPI offload mode, storagebits are set based
+ * on the spi-engine hw implementation.
+ */
+ chan->scan_type.storagebits = st->offload_en ?
+ st->chip_info->offload_storagebits :
+ (st->chip_info->bits > 16 ? 32 : 16);
+
chan->scan_type.endianness = IIO_CPU;
if (indio_dev->modes & INDIO_DIRECT_MODE)
indio_dev->modes = st->bops->iio_backend_config ? 0 : INDIO_DIRECT_MODE;
indio_dev->name = chip_info->name;
+ /* Using spi-engine with offload support ? */
+ if (st->bops->offload_config) {
+ ret = st->bops->offload_config(dev, indio_dev);
+ if (ret)
+ return ret;
+ }
+
ret = ad7606_probe_channels(indio_dev);
if (ret)
return ret;
}
/* If convst pin is not defined, setup PWM. */
- if (!st->gpio_convst) {
+ if (!st->gpio_convst || st->offload_en) {
st->cnvst_pwm = devm_pwm_get(dev, NULL);
if (IS_ERR(st->cnvst_pwm))
return PTR_ERR(st->cnvst_pwm);
return ret;
indio_dev->setup_ops = &ad7606_backend_buffer_ops;
- } else {
-
+ } else if (!st->offload_en) {
/* Reserve the PWM use only for backend (force gpio_convst definition) */
if (!st->gpio_convst)
return dev_err_probe(dev, -EINVAL,
st->write_scale = ad7606_write_scale_hw;
st->write_os = ad7606_write_os_hw;
- if (st->sw_mode_en) {
+ /* Offload needs 1 DOUT line, applying this setting in sw_setup_cb. */
+ if (st->sw_mode_en || st->offload_en) {
indio_dev->info = &ad7606_info_sw_mode;
st->chip_info->sw_setup_cb(indio_dev);
}
* @os_req_reset: some devices require a reset to update oversampling
* @init_delay_ms: required delay in milliseconds for initialization
* after a restart
+ * @offload_storagebits: storage bits used by the offload hw implementation
*/
struct ad7606_chip_info {
unsigned int max_samplerate;
unsigned int oversampling_num;
bool os_req_reset;
unsigned long init_delay_ms;
+ u8 offload_storagebits;
};
/**
* @trig: The IIO trigger associated with the device.
* @completion: completion to indicate end of conversion
* @data: buffer for reading data from the device
+ * @offload_en: SPI offload enabled
+ * @bus_data: bus-specific variables
* @d16: be16 buffer for reading data from the device
*/
struct ad7606_state {
struct iio_trigger *trig;
struct completion completion;
+ bool offload_en;
+ void *bus_data;
+
/*
* DMA (thus cache coherency maintenance) may require the
* transfer buffers to live in their own cache lines.
* @read_block: function pointer for reading blocks of data
* @sw_mode_config: pointer to a function which configured the device
* for software mode
+ * @offload_config: function pointer for configuring offload support,
+ * where any
* @reg_read: function pointer for reading spi register
* @reg_write: function pointer for writing spi register
* @update_scan_mode: function pointer for handling the calls to iio_info's
struct ad7606_bus_ops {
/* more methods added in future? */
int (*iio_backend_config)(struct device *dev, struct iio_dev *indio_dev);
+ int (*offload_config)(struct device *dev, struct iio_dev *indio_dev);
int (*read_block)(struct device *dev, int num, void *data);
int (*sw_mode_config)(struct iio_dev *indio_dev);
int (*reg_read)(struct ad7606_state *st, unsigned int addr);
const struct ad7606_bus_ops *bops);
int ad7606_reset(struct ad7606_state *st);
+int ad7606_pwm_set_swing(struct ad7606_state *st);
+int ad7606_pwm_set_low(struct ad7606_state *st);
extern const struct ad7606_chip_info ad7605_4_info;
extern const struct ad7606_chip_info ad7606_8_info;
*/
#include <linux/err.h>
+#include <linux/math.h>
#include <linux/module.h>
+#include <linux/pwm.h>
+#include <linux/spi/offload/consumer.h>
+#include <linux/spi/offload/provider.h>
#include <linux/spi/spi.h>
#include <linux/types.h>
+#include <linux/units.h>
+#include <linux/iio/buffer-dmaengine.h>
#include <linux/iio/iio.h>
+
+#include <dt-bindings/iio/adc/adi,ad7606.h>
+
#include "ad7606.h"
#define MAX_SPI_FREQ_HZ 23500000 /* VDRIVE above 4.75 V */
+struct spi_bus_data {
+ struct spi_offload *offload;
+ struct spi_offload_trigger *offload_trigger;
+ struct spi_transfer offload_xfer;
+ struct spi_message offload_msg;
+};
+
static u16 ad7616_spi_rd_wr_cmd(int addr, char is_write_op)
{
/*
AD7606_SINGLE_DOUT);
}
+static const struct spi_offload_config ad7606_spi_offload_config = {
+ .capability_flags = SPI_OFFLOAD_CAP_TRIGGER |
+ SPI_OFFLOAD_CAP_RX_STREAM_DMA,
+};
+
+static int ad7606_spi_offload_buffer_postenable(struct iio_dev *indio_dev)
+{
+ const struct iio_scan_type *scan_type;
+ struct ad7606_state *st = iio_priv(indio_dev);
+ struct spi_bus_data *bus_data = st->bus_data;
+ struct spi_transfer *xfer = &bus_data->offload_xfer;
+ struct spi_device *spi = to_spi_device(st->dev);
+ struct spi_offload_trigger_config config = {
+ .type = SPI_OFFLOAD_TRIGGER_DATA_READY,
+ };
+ int ret;
+
+ scan_type = &indio_dev->channels[0].scan_type;
+
+ xfer->bits_per_word = scan_type->realbits;
+ xfer->offload_flags = SPI_OFFLOAD_XFER_RX_STREAM;
+ /*
+ * Using SPI offload, storagebits are related to the spi-engine
+ * hw implementation, can be 16 or 32, so can't be used to compute
+ * struct spi_transfer.len. Using realbits instead.
+ */
+ xfer->len = (scan_type->realbits > 16 ? 4 : 2) *
+ st->chip_info->num_adc_channels;
+
+ spi_message_init_with_transfers(&bus_data->offload_msg, xfer, 1);
+ bus_data->offload_msg.offload = bus_data->offload;
+
+ ret = spi_optimize_message(spi, &bus_data->offload_msg);
+ if (ret) {
+ dev_err(st->dev, "failed to prepare offload, err: %d\n", ret);
+ return ret;
+ }
+
+ ret = spi_offload_trigger_enable(bus_data->offload,
+ bus_data->offload_trigger,
+ &config);
+ if (ret)
+ goto err_unoptimize_message;
+
+ ret = ad7606_pwm_set_swing(st);
+ if (ret)
+ goto err_offload_exit_conversion_mode;
+
+ return 0;
+
+err_offload_exit_conversion_mode:
+ spi_offload_trigger_disable(bus_data->offload,
+ bus_data->offload_trigger);
+
+err_unoptimize_message:
+ spi_unoptimize_message(&bus_data->offload_msg);
+
+ return ret;
+}
+
+static int ad7606_spi_offload_buffer_predisable(struct iio_dev *indio_dev)
+{
+ struct ad7606_state *st = iio_priv(indio_dev);
+ struct spi_bus_data *bus_data = st->bus_data;
+ int ret;
+
+ ret = ad7606_pwm_set_low(st);
+ if (ret)
+ return ret;
+
+ spi_offload_trigger_disable(bus_data->offload,
+ bus_data->offload_trigger);
+ spi_unoptimize_message(&bus_data->offload_msg);
+
+ return 0;
+}
+
+static const struct iio_buffer_setup_ops ad7606_offload_buffer_setup_ops = {
+ .postenable = ad7606_spi_offload_buffer_postenable,
+ .predisable = ad7606_spi_offload_buffer_predisable,
+};
+
+static bool ad7606_spi_offload_trigger_match(
+ struct spi_offload_trigger *trigger,
+ enum spi_offload_trigger_type type,
+ u64 *args, u32 nargs)
+{
+ if (type != SPI_OFFLOAD_TRIGGER_DATA_READY)
+ return false;
+
+ /*
+ * Requires 1 arg:
+ * args[0] is the trigger event.
+ */
+ if (nargs != 1 || args[0] != AD7606_TRIGGER_EVENT_BUSY)
+ return false;
+
+ return true;
+}
+
+static int ad7606_spi_offload_trigger_request(
+ struct spi_offload_trigger *trigger,
+ enum spi_offload_trigger_type type,
+ u64 *args, u32 nargs)
+{
+ /* Should already be validated by match, but just in case. */
+ if (nargs != 1)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int ad7606_spi_offload_trigger_validate(
+ struct spi_offload_trigger *trigger,
+ struct spi_offload_trigger_config *config)
+{
+ if (config->type != SPI_OFFLOAD_TRIGGER_DATA_READY)
+ return -EINVAL;
+
+ return 0;
+}
+
+static const struct spi_offload_trigger_ops ad7606_offload_trigger_ops = {
+ .match = ad7606_spi_offload_trigger_match,
+ .request = ad7606_spi_offload_trigger_request,
+ .validate = ad7606_spi_offload_trigger_validate,
+};
+
+static int ad7606_spi_offload_probe(struct device *dev,
+ struct iio_dev *indio_dev)
+{
+ struct ad7606_state *st = iio_priv(indio_dev);
+ struct spi_device *spi = to_spi_device(dev);
+ struct spi_bus_data *bus_data;
+ struct dma_chan *rx_dma;
+ struct spi_offload_trigger_info trigger_info = {
+ .fwnode = dev_fwnode(dev),
+ .ops = &ad7606_offload_trigger_ops,
+ .priv = st,
+ };
+ int ret;
+
+ bus_data = devm_kzalloc(dev, sizeof(*bus_data), GFP_KERNEL);
+ if (!bus_data)
+ return -ENOMEM;
+ st->bus_data = bus_data;
+
+ bus_data->offload = devm_spi_offload_get(dev, spi,
+ &ad7606_spi_offload_config);
+ ret = PTR_ERR_OR_ZERO(bus_data->offload);
+ if (ret && ret != -ENODEV)
+ return dev_err_probe(dev, ret, "failed to get SPI offload\n");
+ /* Allow main ad7606_probe function to continue. */
+ if (ret == -ENODEV)
+ return 0;
+
+ ret = devm_spi_offload_trigger_register(dev, &trigger_info);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "failed to register offload trigger\n");
+
+ bus_data->offload_trigger = devm_spi_offload_trigger_get(dev,
+ bus_data->offload, SPI_OFFLOAD_TRIGGER_DATA_READY);
+ if (IS_ERR(bus_data->offload_trigger))
+ return dev_err_probe(dev, PTR_ERR(bus_data->offload_trigger),
+ "failed to get offload trigger\n");
+
+ /* TODO: PWM setup should be ok, done for the backend. PWM mutex ? */
+ rx_dma = devm_spi_offload_rx_stream_request_dma_chan(dev,
+ bus_data->offload);
+ if (IS_ERR(rx_dma))
+ return dev_err_probe(dev, PTR_ERR(rx_dma),
+ "failed to get offload RX DMA\n");
+
+ ret = devm_iio_dmaengine_buffer_setup_with_handle(dev, indio_dev,
+ rx_dma, IIO_BUFFER_DIRECTION_IN);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "failed to setup offload RX DMA\n");
+
+ /* Use offload ops. */
+ indio_dev->setup_ops = &ad7606_offload_buffer_setup_ops;
+
+ st->offload_en = true;
+
+ return 0;
+}
+
static const struct ad7606_bus_ops ad7606_spi_bops = {
+ .offload_config = ad7606_spi_offload_probe,
.read_block = ad7606_spi_read_block,
};
static const struct ad7606_bus_ops ad7607_spi_bops = {
+ .offload_config = ad7606_spi_offload_probe,
.read_block = ad7606_spi_read_block14to16,
};
static const struct ad7606_bus_ops ad7608_spi_bops = {
+ .offload_config = ad7606_spi_offload_probe,
.read_block = ad7606_spi_read_block18to32,
};
static const struct ad7606_bus_ops ad7616_spi_bops = {
+ .offload_config = ad7606_spi_offload_probe,
.read_block = ad7606_spi_read_block,
.reg_read = ad7606_spi_reg_read,
.reg_write = ad7606_spi_reg_write,
};
static const struct ad7606_bus_ops ad7606b_spi_bops = {
+ .offload_config = ad7606_spi_offload_probe,
.read_block = ad7606_spi_read_block,
.reg_read = ad7606_spi_reg_read,
.reg_write = ad7606_spi_reg_write,
};
static const struct ad7606_bus_ops ad7606c_18_spi_bops = {
+ .offload_config = ad7606_spi_offload_probe,
.read_block = ad7606_spi_read_block18to32,
.reg_read = ad7606_spi_reg_read,
.reg_write = ad7606_spi_reg_write,
MODULE_DESCRIPTION("Analog Devices AD7606 ADC");
MODULE_LICENSE("GPL v2");
MODULE_IMPORT_NS("IIO_AD7606");
+MODULE_IMPORT_NS("IIO_DMAENGINE_BUFFER");
projects / linux-2.6-microblaze.git / commitdiff