source "drivers/staging/media/ipu3/Kconfig"
-source "drivers/staging/media/soc_camera/Kconfig"
-
source "drivers/staging/media/phy-rockchip-dphy-rx0/Kconfig"
source "drivers/staging/media/rkisp1/Kconfig"
obj-$(CONFIG_TEGRA_VDE) += tegra-vde/
obj-$(CONFIG_VIDEO_HANTRO) += hantro/
obj-$(CONFIG_VIDEO_IPU3_IMGU) += ipu3/
-obj-$(CONFIG_SOC_CAMERA) += soc_camera/
obj-$(CONFIG_PHY_ROCKCHIP_DPHY_RX0) += phy-rockchip-dphy-rx0/
obj-$(CONFIG_VIDEO_ROCKCHIP_ISP1) += rkisp1/
obj-$(CONFIG_VIDEO_USBVISION) += usbvision/
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0
-config SOC_CAMERA
- tristate "SoC camera support"
- depends on VIDEO_V4L2 && HAS_DMA && I2C && BROKEN
- select VIDEOBUF2_CORE
- help
- SoC Camera is a common API to several cameras, not connecting
- over a bus like PCI or USB. For example some i2c camera connected
- directly to the data bus of an SoC.
-
-comment "soc_camera sensor drivers"
-
-config SOC_CAMERA_MT9M111
- tristate "legacy soc_camera mt9m111, mt9m112 and mt9m131 support"
- depends on SOC_CAMERA && I2C
- select VIDEO_MT9M111
- help
- This driver supports MT9M111, MT9M112 and MT9M131 cameras from
- Micron/Aptina.
- This is the legacy configuration which shouldn't be used anymore,
- while VIDEO_MT9M111 should be used instead.
-
-config SOC_CAMERA_MT9V022
- tristate "mt9v022 and mt9v024 support"
- depends on SOC_CAMERA && I2C
- help
- This driver supports MT9V022 cameras from Micron
-
-config SOC_CAMERA_OV5642
- tristate "ov5642 camera support"
- depends on SOC_CAMERA && I2C
- help
- This is a V4L2 camera driver for the OmniVision OV5642 sensor
-
-config SOC_CAMERA_OV9740
- tristate "ov9740 camera support"
- depends on SOC_CAMERA && I2C
- help
- This is a ov9740 camera driver
-
-config SOC_CAMERA_IMX074
- tristate "imx074 support (DEPRECATED)"
- depends on SOC_CAMERA && I2C
- help
- This driver supports IMX074 cameras from Sony
-
-config SOC_CAMERA_MT9T031
- tristate "mt9t031 support (DEPRECATED)"
- depends on SOC_CAMERA && I2C
- help
- This driver supports MT9T031 cameras from Micron.
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_SOC_CAMERA) += soc_camera.o soc_mediabus.o
-obj-$(CONFIG_SOC_CAMERA_MT9V022) += soc_mt9v022.o
-obj-$(CONFIG_SOC_CAMERA_OV5642) += soc_ov5642.o
-obj-$(CONFIG_SOC_CAMERA_OV9740) += soc_ov9740.o
-obj-$(CONFIG_SOC_CAMERA_IMX074) += imx074.o
-obj-$(CONFIG_SOC_CAMERA_MT9T031) += mt9t031.o
+++ /dev/null
-The SoC camera framework is obsolete and scheduled for removal in the near
-future. Developers are encouraged to convert the drivers to use the
-regular V4L2 API if these drivers are still needed (and if someone has the
-hardware).
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Driver for IMX074 CMOS Image Sensor from Sony
- *
- * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- *
- * Partially inspired by the IMX074 driver from the Android / MSM tree
- */
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/v4l2-mediabus.h>
-#include <linux/slab.h>
-#include <linux/videodev2.h>
-#include <linux/module.h>
-
-#include <media/soc_camera.h>
-#include <media/v4l2-async.h>
-#include <media/v4l2-clk.h>
-#include <media/v4l2-subdev.h>
-
-/* IMX074 registers */
-
-#define MODE_SELECT 0x0100
-#define IMAGE_ORIENTATION 0x0101
-#define GROUPED_PARAMETER_HOLD 0x0104
-
-/* Integration Time */
-#define COARSE_INTEGRATION_TIME_HI 0x0202
-#define COARSE_INTEGRATION_TIME_LO 0x0203
-/* Gain */
-#define ANALOGUE_GAIN_CODE_GLOBAL_HI 0x0204
-#define ANALOGUE_GAIN_CODE_GLOBAL_LO 0x0205
-
-/* PLL registers */
-#define PRE_PLL_CLK_DIV 0x0305
-#define PLL_MULTIPLIER 0x0307
-#define PLSTATIM 0x302b
-#define VNDMY_ABLMGSHLMT 0x300a
-#define Y_OPBADDR_START_DI 0x3014
-/* mode setting */
-#define FRAME_LENGTH_LINES_HI 0x0340
-#define FRAME_LENGTH_LINES_LO 0x0341
-#define LINE_LENGTH_PCK_HI 0x0342
-#define LINE_LENGTH_PCK_LO 0x0343
-#define YADDR_START 0x0347
-#define YADDR_END 0x034b
-#define X_OUTPUT_SIZE_MSB 0x034c
-#define X_OUTPUT_SIZE_LSB 0x034d
-#define Y_OUTPUT_SIZE_MSB 0x034e
-#define Y_OUTPUT_SIZE_LSB 0x034f
-#define X_EVEN_INC 0x0381
-#define X_ODD_INC 0x0383
-#define Y_EVEN_INC 0x0385
-#define Y_ODD_INC 0x0387
-
-#define HMODEADD 0x3001
-#define VMODEADD 0x3016
-#define VAPPLINE_START 0x3069
-#define VAPPLINE_END 0x306b
-#define SHUTTER 0x3086
-#define HADDAVE 0x30e8
-#define LANESEL 0x3301
-
-/* IMX074 supported geometry */
-#define IMX074_WIDTH 1052
-#define IMX074_HEIGHT 780
-
-/* IMX074 has only one fixed colorspace per pixelcode */
-struct imx074_datafmt {
- u32 code;
- enum v4l2_colorspace colorspace;
-};
-
-struct imx074 {
- struct v4l2_subdev subdev;
- const struct imx074_datafmt *fmt;
- struct v4l2_clk *clk;
-};
-
-static const struct imx074_datafmt imx074_colour_fmts[] = {
- {MEDIA_BUS_FMT_SBGGR8_1X8, V4L2_COLORSPACE_SRGB},
-};
-
-static struct imx074 *to_imx074(const struct i2c_client *client)
-{
- return container_of(i2c_get_clientdata(client), struct imx074, subdev);
-}
-
-/* Find a data format by a pixel code in an array */
-static const struct imx074_datafmt *imx074_find_datafmt(u32 code)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(imx074_colour_fmts); i++)
- if (imx074_colour_fmts[i].code == code)
- return imx074_colour_fmts + i;
-
- return NULL;
-}
-
-static int reg_write(struct i2c_client *client, const u16 addr, const u8 data)
-{
- struct i2c_adapter *adap = client->adapter;
- struct i2c_msg msg;
- unsigned char tx[3];
- int ret;
-
- msg.addr = client->addr;
- msg.buf = tx;
- msg.len = 3;
- msg.flags = 0;
-
- tx[0] = addr >> 8;
- tx[1] = addr & 0xff;
- tx[2] = data;
-
- ret = i2c_transfer(adap, &msg, 1);
-
- mdelay(2);
-
- return ret == 1 ? 0 : -EIO;
-}
-
-static int reg_read(struct i2c_client *client, const u16 addr)
-{
- u8 buf[2] = {addr >> 8, addr & 0xff};
- int ret;
- struct i2c_msg msgs[] = {
- {
- .addr = client->addr,
- .flags = 0,
- .len = 2,
- .buf = buf,
- }, {
- .addr = client->addr,
- .flags = I2C_M_RD,
- .len = 2,
- .buf = buf,
- },
- };
-
- ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
- if (ret < 0) {
- dev_warn(&client->dev, "Reading register %x from %x failed\n",
- addr, client->addr);
- return ret;
- }
-
- return buf[0] & 0xff; /* no sign-extension */
-}
-
-static int imx074_set_fmt(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_format *format)
-{
- struct v4l2_mbus_framefmt *mf = &format->format;
- const struct imx074_datafmt *fmt = imx074_find_datafmt(mf->code);
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct imx074 *priv = to_imx074(client);
-
- if (format->pad)
- return -EINVAL;
-
- dev_dbg(sd->v4l2_dev->dev, "%s(%u)\n", __func__, mf->code);
-
- if (!fmt) {
- /* MIPI CSI could have changed the format, double-check */
- if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
- return -EINVAL;
- mf->code = imx074_colour_fmts[0].code;
- mf->colorspace = imx074_colour_fmts[0].colorspace;
- }
-
- mf->width = IMX074_WIDTH;
- mf->height = IMX074_HEIGHT;
- mf->field = V4L2_FIELD_NONE;
-
- if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
- priv->fmt = fmt;
- else
- cfg->try_fmt = *mf;
-
- return 0;
-}
-
-static int imx074_get_fmt(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_format *format)
-{
- struct v4l2_mbus_framefmt *mf = &format->format;
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct imx074 *priv = to_imx074(client);
-
- const struct imx074_datafmt *fmt = priv->fmt;
-
- if (format->pad)
- return -EINVAL;
-
- mf->code = fmt->code;
- mf->colorspace = fmt->colorspace;
- mf->width = IMX074_WIDTH;
- mf->height = IMX074_HEIGHT;
- mf->field = V4L2_FIELD_NONE;
-
- return 0;
-}
-
-static int imx074_get_selection(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_selection *sel)
-{
- if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
- return -EINVAL;
-
- sel->r.left = 0;
- sel->r.top = 0;
- sel->r.width = IMX074_WIDTH;
- sel->r.height = IMX074_HEIGHT;
-
- switch (sel->target) {
- case V4L2_SEL_TGT_CROP_BOUNDS:
- case V4L2_SEL_TGT_CROP:
- return 0;
- default:
- return -EINVAL;
- }
-}
-
-static int imx074_enum_mbus_code(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_mbus_code_enum *code)
-{
- if (code->pad ||
- (unsigned int)code->index >= ARRAY_SIZE(imx074_colour_fmts))
- return -EINVAL;
-
- code->code = imx074_colour_fmts[code->index].code;
- return 0;
-}
-
-static int imx074_s_stream(struct v4l2_subdev *sd, int enable)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
-
- /* MODE_SELECT: stream or standby */
- return reg_write(client, MODE_SELECT, !!enable);
-}
-
-static int imx074_s_power(struct v4l2_subdev *sd, int on)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
- struct imx074 *priv = to_imx074(client);
-
- return soc_camera_set_power(&client->dev, ssdd, priv->clk, on);
-}
-
-static int imx074_g_mbus_config(struct v4l2_subdev *sd,
- struct v4l2_mbus_config *cfg)
-{
- cfg->type = V4L2_MBUS_CSI2_DPHY;
- cfg->flags = V4L2_MBUS_CSI2_2_LANE |
- V4L2_MBUS_CSI2_CHANNEL_0 |
- V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
-
- return 0;
-}
-
-static const struct v4l2_subdev_video_ops imx074_subdev_video_ops = {
- .s_stream = imx074_s_stream,
- .g_mbus_config = imx074_g_mbus_config,
-};
-
-static const struct v4l2_subdev_core_ops imx074_subdev_core_ops = {
- .s_power = imx074_s_power,
-};
-
-static const struct v4l2_subdev_pad_ops imx074_subdev_pad_ops = {
- .enum_mbus_code = imx074_enum_mbus_code,
- .get_selection = imx074_get_selection,
- .get_fmt = imx074_get_fmt,
- .set_fmt = imx074_set_fmt,
-};
-
-static const struct v4l2_subdev_ops imx074_subdev_ops = {
- .core = &imx074_subdev_core_ops,
- .video = &imx074_subdev_video_ops,
- .pad = &imx074_subdev_pad_ops,
-};
-
-static int imx074_video_probe(struct i2c_client *client)
-{
- struct v4l2_subdev *subdev = i2c_get_clientdata(client);
- int ret;
- u16 id;
-
- ret = imx074_s_power(subdev, 1);
- if (ret < 0)
- return ret;
-
- /* Read sensor Model ID */
- ret = reg_read(client, 0);
- if (ret < 0)
- goto done;
-
- id = ret << 8;
-
- ret = reg_read(client, 1);
- if (ret < 0)
- goto done;
-
- id |= ret;
-
- dev_info(&client->dev, "Chip ID 0x%04x detected\n", id);
-
- if (id != 0x74) {
- ret = -ENODEV;
- goto done;
- }
-
- /* PLL Setting EXTCLK=24MHz, 22.5times */
- reg_write(client, PLL_MULTIPLIER, 0x2D);
- reg_write(client, PRE_PLL_CLK_DIV, 0x02);
- reg_write(client, PLSTATIM, 0x4B);
-
- /* 2-lane mode */
- reg_write(client, 0x3024, 0x00);
-
- reg_write(client, IMAGE_ORIENTATION, 0x00);
-
- /* select RAW mode:
- * 0x08+0x08 = top 8 bits
- * 0x0a+0x08 = compressed 8-bits
- * 0x0a+0x0a = 10 bits
- */
- reg_write(client, 0x0112, 0x08);
- reg_write(client, 0x0113, 0x08);
-
- /* Base setting for High frame mode */
- reg_write(client, VNDMY_ABLMGSHLMT, 0x80);
- reg_write(client, Y_OPBADDR_START_DI, 0x08);
- reg_write(client, 0x3015, 0x37);
- reg_write(client, 0x301C, 0x01);
- reg_write(client, 0x302C, 0x05);
- reg_write(client, 0x3031, 0x26);
- reg_write(client, 0x3041, 0x60);
- reg_write(client, 0x3051, 0x24);
- reg_write(client, 0x3053, 0x34);
- reg_write(client, 0x3057, 0xC0);
- reg_write(client, 0x305C, 0x09);
- reg_write(client, 0x305D, 0x07);
- reg_write(client, 0x3060, 0x30);
- reg_write(client, 0x3065, 0x00);
- reg_write(client, 0x30AA, 0x08);
- reg_write(client, 0x30AB, 0x1C);
- reg_write(client, 0x30B0, 0x32);
- reg_write(client, 0x30B2, 0x83);
- reg_write(client, 0x30D3, 0x04);
- reg_write(client, 0x3106, 0x78);
- reg_write(client, 0x310C, 0x82);
- reg_write(client, 0x3304, 0x05);
- reg_write(client, 0x3305, 0x04);
- reg_write(client, 0x3306, 0x11);
- reg_write(client, 0x3307, 0x02);
- reg_write(client, 0x3308, 0x0C);
- reg_write(client, 0x3309, 0x06);
- reg_write(client, 0x330A, 0x08);
- reg_write(client, 0x330B, 0x04);
- reg_write(client, 0x330C, 0x08);
- reg_write(client, 0x330D, 0x06);
- reg_write(client, 0x330E, 0x01);
- reg_write(client, 0x3381, 0x00);
-
- /* V : 1/2V-addition (1,3), H : 1/2H-averaging (1,3) -> Full HD */
- /* 1608 = 1560 + 48 (black lines) */
- reg_write(client, FRAME_LENGTH_LINES_HI, 0x06);
- reg_write(client, FRAME_LENGTH_LINES_LO, 0x48);
- reg_write(client, YADDR_START, 0x00);
- reg_write(client, YADDR_END, 0x2F);
- /* 0x838 == 2104 */
- reg_write(client, X_OUTPUT_SIZE_MSB, 0x08);
- reg_write(client, X_OUTPUT_SIZE_LSB, 0x38);
- /* 0x618 == 1560 */
- reg_write(client, Y_OUTPUT_SIZE_MSB, 0x06);
- reg_write(client, Y_OUTPUT_SIZE_LSB, 0x18);
- reg_write(client, X_EVEN_INC, 0x01);
- reg_write(client, X_ODD_INC, 0x03);
- reg_write(client, Y_EVEN_INC, 0x01);
- reg_write(client, Y_ODD_INC, 0x03);
- reg_write(client, HMODEADD, 0x00);
- reg_write(client, VMODEADD, 0x16);
- reg_write(client, VAPPLINE_START, 0x24);
- reg_write(client, VAPPLINE_END, 0x53);
- reg_write(client, SHUTTER, 0x00);
- reg_write(client, HADDAVE, 0x80);
-
- reg_write(client, LANESEL, 0x00);
-
- reg_write(client, GROUPED_PARAMETER_HOLD, 0x00); /* off */
-
- ret = 0;
-
-done:
- imx074_s_power(subdev, 0);
- return ret;
-}
-
-static int imx074_probe(struct i2c_client *client,
- const struct i2c_device_id *did)
-{
- struct imx074 *priv;
- struct i2c_adapter *adapter = client->adapter;
- struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
- int ret;
-
- if (!ssdd) {
- dev_err(&client->dev, "IMX074: missing platform data!\n");
- return -EINVAL;
- }
-
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
- dev_warn(&adapter->dev,
- "I2C-Adapter doesn't support I2C_FUNC_SMBUS_BYTE\n");
- return -EIO;
- }
-
- priv = devm_kzalloc(&client->dev, sizeof(struct imx074), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
-
- v4l2_i2c_subdev_init(&priv->subdev, client, &imx074_subdev_ops);
-
- priv->fmt = &imx074_colour_fmts[0];
-
- priv->clk = v4l2_clk_get(&client->dev, "mclk");
- if (IS_ERR(priv->clk)) {
- dev_info(&client->dev, "Error %ld getting clock\n", PTR_ERR(priv->clk));
- return -EPROBE_DEFER;
- }
-
- ret = soc_camera_power_init(&client->dev, ssdd);
- if (ret < 0)
- goto epwrinit;
-
- ret = imx074_video_probe(client);
- if (ret < 0)
- goto eprobe;
-
- ret = v4l2_async_register_subdev(&priv->subdev);
- if (!ret)
- return 0;
-
-epwrinit:
-eprobe:
- v4l2_clk_put(priv->clk);
- return ret;
-}
-
-static int imx074_remove(struct i2c_client *client)
-{
- struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
- struct imx074 *priv = to_imx074(client);
-
- v4l2_async_unregister_subdev(&priv->subdev);
- v4l2_clk_put(priv->clk);
-
- if (ssdd->free_bus)
- ssdd->free_bus(ssdd);
-
- return 0;
-}
-
-static const struct i2c_device_id imx074_id[] = {
- { "imx074", 0 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, imx074_id);
-
-static struct i2c_driver imx074_i2c_driver = {
- .driver = {
- .name = "imx074",
- },
- .probe = imx074_probe,
- .remove = imx074_remove,
- .id_table = imx074_id,
-};
-
-module_i2c_driver(imx074_i2c_driver);
-
-MODULE_DESCRIPTION("Sony IMX074 Camera driver");
-MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
-MODULE_LICENSE("GPL v2");
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Driver for MT9T031 CMOS Image Sensor from Micron
- *
- * Copyright (C) 2008, Guennadi Liakhovetski, DENX Software Engineering <lg@denx.de>
- */
-#include <linux/device.h>
-#include <linux/i2c.h>
-#include <linux/log2.h>
-#include <linux/pm.h>
-#include <linux/slab.h>
-#include <linux/v4l2-mediabus.h>
-#include <linux/videodev2.h>
-#include <linux/module.h>
-
-#include <media/soc_camera.h>
-#include <media/v4l2-clk.h>
-#include <media/v4l2-subdev.h>
-#include <media/v4l2-ctrls.h>
-
-/*
- * ATTENTION: this driver still cannot be used outside of the soc-camera
- * framework because of its PM implementation, using the video_device node.
- * If hardware becomes available for testing, alternative PM approaches shall
- * be considered and tested.
- */
-
-/*
- * mt9t031 i2c address 0x5d
- * The platform has to define struct i2c_board_info objects and link to them
- * from struct soc_camera_host_desc
- */
-
-/* mt9t031 selected register addresses */
-#define MT9T031_CHIP_VERSION 0x00
-#define MT9T031_ROW_START 0x01
-#define MT9T031_COLUMN_START 0x02
-#define MT9T031_WINDOW_HEIGHT 0x03
-#define MT9T031_WINDOW_WIDTH 0x04
-#define MT9T031_HORIZONTAL_BLANKING 0x05
-#define MT9T031_VERTICAL_BLANKING 0x06
-#define MT9T031_OUTPUT_CONTROL 0x07
-#define MT9T031_SHUTTER_WIDTH_UPPER 0x08
-#define MT9T031_SHUTTER_WIDTH 0x09
-#define MT9T031_PIXEL_CLOCK_CONTROL 0x0a
-#define MT9T031_FRAME_RESTART 0x0b
-#define MT9T031_SHUTTER_DELAY 0x0c
-#define MT9T031_RESET 0x0d
-#define MT9T031_READ_MODE_1 0x1e
-#define MT9T031_READ_MODE_2 0x20
-#define MT9T031_READ_MODE_3 0x21
-#define MT9T031_ROW_ADDRESS_MODE 0x22
-#define MT9T031_COLUMN_ADDRESS_MODE 0x23
-#define MT9T031_GLOBAL_GAIN 0x35
-#define MT9T031_CHIP_ENABLE 0xF8
-
-#define MT9T031_MAX_HEIGHT 1536
-#define MT9T031_MAX_WIDTH 2048
-#define MT9T031_MIN_HEIGHT 2
-#define MT9T031_MIN_WIDTH 18
-#define MT9T031_HORIZONTAL_BLANK 142
-#define MT9T031_VERTICAL_BLANK 25
-#define MT9T031_COLUMN_SKIP 32
-#define MT9T031_ROW_SKIP 20
-
-struct mt9t031 {
- struct v4l2_subdev subdev;
- struct v4l2_ctrl_handler hdl;
- struct {
- /* exposure/auto-exposure cluster */
- struct v4l2_ctrl *autoexposure;
- struct v4l2_ctrl *exposure;
- };
- struct v4l2_rect rect; /* Sensor window */
- struct v4l2_clk *clk;
- u16 xskip;
- u16 yskip;
- unsigned int total_h;
- unsigned short y_skip_top; /* Lines to skip at the top */
-};
-
-static struct mt9t031 *to_mt9t031(const struct i2c_client *client)
-{
- return container_of(i2c_get_clientdata(client), struct mt9t031, subdev);
-}
-
-static int reg_read(struct i2c_client *client, const u8 reg)
-{
- return i2c_smbus_read_word_swapped(client, reg);
-}
-
-static int reg_write(struct i2c_client *client, const u8 reg,
- const u16 data)
-{
- return i2c_smbus_write_word_swapped(client, reg, data);
-}
-
-static int reg_set(struct i2c_client *client, const u8 reg,
- const u16 data)
-{
- int ret;
-
- ret = reg_read(client, reg);
- if (ret < 0)
- return ret;
- return reg_write(client, reg, ret | data);
-}
-
-static int reg_clear(struct i2c_client *client, const u8 reg,
- const u16 data)
-{
- int ret;
-
- ret = reg_read(client, reg);
- if (ret < 0)
- return ret;
- return reg_write(client, reg, ret & ~data);
-}
-
-static int set_shutter(struct i2c_client *client, const u32 data)
-{
- int ret;
-
- ret = reg_write(client, MT9T031_SHUTTER_WIDTH_UPPER, data >> 16);
-
- if (ret >= 0)
- ret = reg_write(client, MT9T031_SHUTTER_WIDTH, data & 0xffff);
-
- return ret;
-}
-
-static int get_shutter(struct i2c_client *client, u32 *data)
-{
- int ret;
-
- ret = reg_read(client, MT9T031_SHUTTER_WIDTH_UPPER);
- *data = ret << 16;
-
- if (ret >= 0)
- ret = reg_read(client, MT9T031_SHUTTER_WIDTH);
- *data |= ret & 0xffff;
-
- return ret < 0 ? ret : 0;
-}
-
-static int mt9t031_idle(struct i2c_client *client)
-{
- int ret;
-
- /* Disable chip output, synchronous option update */
- ret = reg_write(client, MT9T031_RESET, 1);
- if (ret >= 0)
- ret = reg_write(client, MT9T031_RESET, 0);
- if (ret >= 0)
- ret = reg_clear(client, MT9T031_OUTPUT_CONTROL, 2);
-
- return ret >= 0 ? 0 : -EIO;
-}
-
-static int mt9t031_s_stream(struct v4l2_subdev *sd, int enable)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- int ret;
-
- if (enable)
- /* Switch to master "normal" mode */
- ret = reg_set(client, MT9T031_OUTPUT_CONTROL, 2);
- else
- /* Stop sensor readout */
- ret = reg_clear(client, MT9T031_OUTPUT_CONTROL, 2);
-
- if (ret < 0)
- return -EIO;
-
- return 0;
-}
-
-/* target must be _even_ */
-static u16 mt9t031_skip(s32 *source, s32 target, s32 max)
-{
- unsigned int skip;
-
- if (*source < target + target / 2) {
- *source = target;
- return 1;
- }
-
- skip = min(max, *source + target / 2) / target;
- if (skip > 8)
- skip = 8;
- *source = target * skip;
-
- return skip;
-}
-
-/* rect is the sensor rectangle, the caller guarantees parameter validity */
-static int mt9t031_set_params(struct i2c_client *client,
- struct v4l2_rect *rect, u16 xskip, u16 yskip)
-{
- struct mt9t031 *mt9t031 = to_mt9t031(client);
- int ret;
- u16 xbin, ybin;
- const u16 hblank = MT9T031_HORIZONTAL_BLANK,
- vblank = MT9T031_VERTICAL_BLANK;
-
- xbin = min(xskip, (u16)3);
- ybin = min(yskip, (u16)3);
-
- /*
- * Could just do roundup(rect->left, [xy]bin * 2); but this is cheaper.
- * There is always a valid suitably aligned value. The worst case is
- * xbin = 3, width = 2048. Then we will start at 36, the last read out
- * pixel will be 2083, which is < 2085 - first black pixel.
- *
- * MT9T031 datasheet imposes window left border alignment, depending on
- * the selected xskip. Failing to conform to this requirement produces
- * dark horizontal stripes in the image. However, even obeying to this
- * requirement doesn't eliminate the stripes in all configurations. They
- * appear "locally reproducibly," but can differ between tests under
- * different lighting conditions.
- */
- switch (xbin) {
- case 1:
- rect->left &= ~1;
- break;
- case 2:
- rect->left &= ~3;
- break;
- case 3:
- rect->left = rect->left > roundup(MT9T031_COLUMN_SKIP, 6) ?
- (rect->left / 6) * 6 : roundup(MT9T031_COLUMN_SKIP, 6);
- }
-
- rect->top &= ~1;
-
- dev_dbg(&client->dev, "skip %u:%u, rect %ux%u@%u:%u\n",
- xskip, yskip, rect->width, rect->height, rect->left, rect->top);
-
- /* Disable register update, reconfigure atomically */
- ret = reg_set(client, MT9T031_OUTPUT_CONTROL, 1);
- if (ret < 0)
- return ret;
-
- /* Blanking and start values - default... */
- ret = reg_write(client, MT9T031_HORIZONTAL_BLANKING, hblank);
- if (ret >= 0)
- ret = reg_write(client, MT9T031_VERTICAL_BLANKING, vblank);
-
- if (yskip != mt9t031->yskip || xskip != mt9t031->xskip) {
- /* Binning, skipping */
- if (ret >= 0)
- ret = reg_write(client, MT9T031_COLUMN_ADDRESS_MODE,
- ((xbin - 1) << 4) | (xskip - 1));
- if (ret >= 0)
- ret = reg_write(client, MT9T031_ROW_ADDRESS_MODE,
- ((ybin - 1) << 4) | (yskip - 1));
- }
- dev_dbg(&client->dev, "new physical left %u, top %u\n",
- rect->left, rect->top);
-
- /*
- * The caller provides a supported format, as guaranteed by
- * .set_fmt(FORMAT_TRY), soc_camera_s_selection() and soc_camera_cropcap()
- */
- if (ret >= 0)
- ret = reg_write(client, MT9T031_COLUMN_START, rect->left);
- if (ret >= 0)
- ret = reg_write(client, MT9T031_ROW_START, rect->top);
- if (ret >= 0)
- ret = reg_write(client, MT9T031_WINDOW_WIDTH, rect->width - 1);
- if (ret >= 0)
- ret = reg_write(client, MT9T031_WINDOW_HEIGHT,
- rect->height + mt9t031->y_skip_top - 1);
- if (ret >= 0 && v4l2_ctrl_g_ctrl(mt9t031->autoexposure) == V4L2_EXPOSURE_AUTO) {
- mt9t031->total_h = rect->height + mt9t031->y_skip_top + vblank;
-
- ret = set_shutter(client, mt9t031->total_h);
- }
-
- /* Re-enable register update, commit all changes */
- if (ret >= 0)
- ret = reg_clear(client, MT9T031_OUTPUT_CONTROL, 1);
-
- if (ret >= 0) {
- mt9t031->rect = *rect;
- mt9t031->xskip = xskip;
- mt9t031->yskip = yskip;
- }
-
- return ret < 0 ? ret : 0;
-}
-
-static int mt9t031_set_selection(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_selection *sel)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct mt9t031 *mt9t031 = to_mt9t031(client);
- struct v4l2_rect rect = sel->r;
-
- if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE ||
- sel->target != V4L2_SEL_TGT_CROP)
- return -EINVAL;
-
- rect.width = ALIGN(rect.width, 2);
- rect.height = ALIGN(rect.height, 2);
-
- soc_camera_limit_side(&rect.left, &rect.width,
- MT9T031_COLUMN_SKIP, MT9T031_MIN_WIDTH, MT9T031_MAX_WIDTH);
-
- soc_camera_limit_side(&rect.top, &rect.height,
- MT9T031_ROW_SKIP, MT9T031_MIN_HEIGHT, MT9T031_MAX_HEIGHT);
-
- return mt9t031_set_params(client, &rect, mt9t031->xskip, mt9t031->yskip);
-}
-
-static int mt9t031_get_selection(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_selection *sel)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct mt9t031 *mt9t031 = to_mt9t031(client);
-
- if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
- return -EINVAL;
-
- switch (sel->target) {
- case V4L2_SEL_TGT_CROP_BOUNDS:
- sel->r.left = MT9T031_COLUMN_SKIP;
- sel->r.top = MT9T031_ROW_SKIP;
- sel->r.width = MT9T031_MAX_WIDTH;
- sel->r.height = MT9T031_MAX_HEIGHT;
- return 0;
- case V4L2_SEL_TGT_CROP:
- sel->r = mt9t031->rect;
- return 0;
- default:
- return -EINVAL;
- }
-}
-
-static int mt9t031_get_fmt(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_format *format)
-{
- struct v4l2_mbus_framefmt *mf = &format->format;
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct mt9t031 *mt9t031 = to_mt9t031(client);
-
- if (format->pad)
- return -EINVAL;
-
- mf->width = mt9t031->rect.width / mt9t031->xskip;
- mf->height = mt9t031->rect.height / mt9t031->yskip;
- mf->code = MEDIA_BUS_FMT_SBGGR10_1X10;
- mf->colorspace = V4L2_COLORSPACE_SRGB;
- mf->field = V4L2_FIELD_NONE;
-
- return 0;
-}
-
-/*
- * If a user window larger than sensor window is requested, we'll increase the
- * sensor window.
- */
-static int mt9t031_set_fmt(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_format *format)
-{
- struct v4l2_mbus_framefmt *mf = &format->format;
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct mt9t031 *mt9t031 = to_mt9t031(client);
- u16 xskip, yskip;
- struct v4l2_rect rect = mt9t031->rect;
-
- if (format->pad)
- return -EINVAL;
-
- mf->code = MEDIA_BUS_FMT_SBGGR10_1X10;
- mf->colorspace = V4L2_COLORSPACE_SRGB;
- v4l_bound_align_image(
- &mf->width, MT9T031_MIN_WIDTH, MT9T031_MAX_WIDTH, 1,
- &mf->height, MT9T031_MIN_HEIGHT, MT9T031_MAX_HEIGHT, 1, 0);
-
- if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
- cfg->try_fmt = *mf;
- return 0;
- }
-
- /*
- * Width and height are within limits.
- * S_FMT: use binning and skipping for scaling
- */
- xskip = mt9t031_skip(&rect.width, mf->width, MT9T031_MAX_WIDTH);
- yskip = mt9t031_skip(&rect.height, mf->height, MT9T031_MAX_HEIGHT);
-
- mf->code = MEDIA_BUS_FMT_SBGGR10_1X10;
- mf->colorspace = V4L2_COLORSPACE_SRGB;
-
- /* mt9t031_set_params() doesn't change width and height */
- return mt9t031_set_params(client, &rect, xskip, yskip);
-}
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int mt9t031_g_register(struct v4l2_subdev *sd,
- struct v4l2_dbg_register *reg)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
-
- if (reg->reg > 0xff)
- return -EINVAL;
-
- reg->size = 1;
- reg->val = reg_read(client, reg->reg);
-
- if (reg->val > 0xffff)
- return -EIO;
-
- return 0;
-}
-
-static int mt9t031_s_register(struct v4l2_subdev *sd,
- const struct v4l2_dbg_register *reg)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
-
- if (reg->reg > 0xff)
- return -EINVAL;
-
- if (reg_write(client, reg->reg, reg->val) < 0)
- return -EIO;
-
- return 0;
-}
-#endif
-
-static int mt9t031_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
-{
- struct mt9t031 *mt9t031 = container_of(ctrl->handler,
- struct mt9t031, hdl);
- const u32 shutter_max = MT9T031_MAX_HEIGHT + MT9T031_VERTICAL_BLANK;
- s32 min, max;
-
- switch (ctrl->id) {
- case V4L2_CID_EXPOSURE_AUTO:
- min = mt9t031->exposure->minimum;
- max = mt9t031->exposure->maximum;
- mt9t031->exposure->val =
- (shutter_max / 2 + (mt9t031->total_h - 1) * (max - min))
- / shutter_max + min;
- break;
- }
- return 0;
-}
-
-static int mt9t031_s_ctrl(struct v4l2_ctrl *ctrl)
-{
- struct mt9t031 *mt9t031 = container_of(ctrl->handler,
- struct mt9t031, hdl);
- struct v4l2_subdev *sd = &mt9t031->subdev;
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct v4l2_ctrl *exp = mt9t031->exposure;
- int data;
-
- switch (ctrl->id) {
- case V4L2_CID_VFLIP:
- if (ctrl->val)
- data = reg_set(client, MT9T031_READ_MODE_2, 0x8000);
- else
- data = reg_clear(client, MT9T031_READ_MODE_2, 0x8000);
- if (data < 0)
- return -EIO;
- return 0;
- case V4L2_CID_HFLIP:
- if (ctrl->val)
- data = reg_set(client, MT9T031_READ_MODE_2, 0x4000);
- else
- data = reg_clear(client, MT9T031_READ_MODE_2, 0x4000);
- if (data < 0)
- return -EIO;
- return 0;
- case V4L2_CID_GAIN:
- /* See Datasheet Table 7, Gain settings. */
- if (ctrl->val <= ctrl->default_value) {
- /* Pack it into 0..1 step 0.125, register values 0..8 */
- unsigned long range = ctrl->default_value - ctrl->minimum;
- data = ((ctrl->val - (s32)ctrl->minimum) * 8 + range / 2) / range;
-
- dev_dbg(&client->dev, "Setting gain %d\n", data);
- data = reg_write(client, MT9T031_GLOBAL_GAIN, data);
- if (data < 0)
- return -EIO;
- } else {
- /* Pack it into 1.125..128 variable step, register values 9..0x7860 */
- /* We assume qctrl->maximum - qctrl->default_value - 1 > 0 */
- unsigned long range = ctrl->maximum - ctrl->default_value - 1;
- /* calculated gain: map 65..127 to 9..1024 step 0.125 */
- unsigned long gain = ((ctrl->val - (s32)ctrl->default_value - 1) *
- 1015 + range / 2) / range + 9;
-
- if (gain <= 32) /* calculated gain 9..32 -> 9..32 */
- data = gain;
- else if (gain <= 64) /* calculated gain 33..64 -> 0x51..0x60 */
- data = ((gain - 32) * 16 + 16) / 32 + 80;
- else
- /* calculated gain 65..1024 -> (1..120) << 8 + 0x60 */
- data = (((gain - 64 + 7) * 32) & 0xff00) | 0x60;
-
- dev_dbg(&client->dev, "Set gain from 0x%x to 0x%x\n",
- reg_read(client, MT9T031_GLOBAL_GAIN), data);
- data = reg_write(client, MT9T031_GLOBAL_GAIN, data);
- if (data < 0)
- return -EIO;
- }
- return 0;
-
- case V4L2_CID_EXPOSURE_AUTO:
- if (ctrl->val == V4L2_EXPOSURE_MANUAL) {
- unsigned int range = exp->maximum - exp->minimum;
- unsigned int shutter = ((exp->val - (s32)exp->minimum) * 1048 +
- range / 2) / range + 1;
- u32 old;
-
- get_shutter(client, &old);
- dev_dbg(&client->dev, "Set shutter from %u to %u\n",
- old, shutter);
- if (set_shutter(client, shutter) < 0)
- return -EIO;
- } else {
- const u16 vblank = MT9T031_VERTICAL_BLANK;
- mt9t031->total_h = mt9t031->rect.height +
- mt9t031->y_skip_top + vblank;
-
- if (set_shutter(client, mt9t031->total_h) < 0)
- return -EIO;
- }
- return 0;
- default:
- return -EINVAL;
- }
- return 0;
-}
-
-/*
- * Power Management:
- * This function does nothing for now but must be present for pm to work
- */
-static int mt9t031_runtime_suspend(struct device *dev)
-{
- return 0;
-}
-
-/*
- * Power Management:
- * COLUMN_ADDRESS_MODE and ROW_ADDRESS_MODE are not rewritten if unchanged
- * they are however changed at reset if the platform hook is present
- * thus we rewrite them with the values stored by the driver
- */
-static int mt9t031_runtime_resume(struct device *dev)
-{
- struct video_device *vdev = to_video_device(dev);
- struct v4l2_subdev *sd = soc_camera_vdev_to_subdev(vdev);
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct mt9t031 *mt9t031 = to_mt9t031(client);
-
- int ret;
- u16 xbin, ybin;
-
- xbin = min(mt9t031->xskip, (u16)3);
- ybin = min(mt9t031->yskip, (u16)3);
-
- ret = reg_write(client, MT9T031_COLUMN_ADDRESS_MODE,
- ((xbin - 1) << 4) | (mt9t031->xskip - 1));
- if (ret < 0)
- return ret;
-
- ret = reg_write(client, MT9T031_ROW_ADDRESS_MODE,
- ((ybin - 1) << 4) | (mt9t031->yskip - 1));
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
-static const struct dev_pm_ops mt9t031_dev_pm_ops = {
- .runtime_suspend = mt9t031_runtime_suspend,
- .runtime_resume = mt9t031_runtime_resume,
-};
-
-static const struct device_type mt9t031_dev_type = {
- .name = "MT9T031",
- .pm = &mt9t031_dev_pm_ops,
-};
-
-static int mt9t031_s_power(struct v4l2_subdev *sd, int on)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
- struct video_device *vdev = soc_camera_i2c_to_vdev(client);
- struct mt9t031 *mt9t031 = to_mt9t031(client);
- int ret;
-
- if (on) {
- ret = soc_camera_power_on(&client->dev, ssdd, mt9t031->clk);
- if (ret < 0)
- return ret;
- if (vdev)
- /* Not needed during probing, when vdev isn't available yet */
- vdev->dev.type = &mt9t031_dev_type;
- } else {
- if (vdev)
- vdev->dev.type = NULL;
- soc_camera_power_off(&client->dev, ssdd, mt9t031->clk);
- }
-
- return 0;
-}
-
-/*
- * Interface active, can use i2c. If it fails, it can indeed mean, that
- * this wasn't our capture interface, so, we wait for the right one
- */
-static int mt9t031_video_probe(struct i2c_client *client)
-{
- struct mt9t031 *mt9t031 = to_mt9t031(client);
- s32 data;
- int ret;
-
- ret = mt9t031_s_power(&mt9t031->subdev, 1);
- if (ret < 0)
- return ret;
-
- ret = mt9t031_idle(client);
- if (ret < 0) {
- dev_err(&client->dev, "Failed to initialise the camera\n");
- goto done;
- }
-
- /* Read out the chip version register */
- data = reg_read(client, MT9T031_CHIP_VERSION);
-
- switch (data) {
- case 0x1621:
- break;
- default:
- dev_err(&client->dev,
- "No MT9T031 chip detected, register read %x\n", data);
- ret = -ENODEV;
- goto done;
- }
-
- dev_info(&client->dev, "Detected a MT9T031 chip ID %x\n", data);
-
- ret = v4l2_ctrl_handler_setup(&mt9t031->hdl);
-
-done:
- mt9t031_s_power(&mt9t031->subdev, 0);
-
- return ret;
-}
-
-static int mt9t031_g_skip_top_lines(struct v4l2_subdev *sd, u32 *lines)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct mt9t031 *mt9t031 = to_mt9t031(client);
-
- *lines = mt9t031->y_skip_top;
-
- return 0;
-}
-
-static const struct v4l2_ctrl_ops mt9t031_ctrl_ops = {
- .g_volatile_ctrl = mt9t031_g_volatile_ctrl,
- .s_ctrl = mt9t031_s_ctrl,
-};
-
-static const struct v4l2_subdev_core_ops mt9t031_subdev_core_ops = {
- .s_power = mt9t031_s_power,
-#ifdef CONFIG_VIDEO_ADV_DEBUG
- .g_register = mt9t031_g_register,
- .s_register = mt9t031_s_register,
-#endif
-};
-
-static int mt9t031_enum_mbus_code(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_mbus_code_enum *code)
-{
- if (code->pad || code->index)
- return -EINVAL;
-
- code->code = MEDIA_BUS_FMT_SBGGR10_1X10;
- return 0;
-}
-
-static int mt9t031_g_mbus_config(struct v4l2_subdev *sd,
- struct v4l2_mbus_config *cfg)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
-
- cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING |
- V4L2_MBUS_PCLK_SAMPLE_FALLING | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
- V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_DATA_ACTIVE_HIGH;
- cfg->type = V4L2_MBUS_PARALLEL;
- cfg->flags = soc_camera_apply_board_flags(ssdd, cfg);
-
- return 0;
-}
-
-static int mt9t031_s_mbus_config(struct v4l2_subdev *sd,
- const struct v4l2_mbus_config *cfg)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
-
- if (soc_camera_apply_board_flags(ssdd, cfg) &
- V4L2_MBUS_PCLK_SAMPLE_FALLING)
- return reg_clear(client, MT9T031_PIXEL_CLOCK_CONTROL, 0x8000);
- else
- return reg_set(client, MT9T031_PIXEL_CLOCK_CONTROL, 0x8000);
-}
-
-static const struct v4l2_subdev_video_ops mt9t031_subdev_video_ops = {
- .s_stream = mt9t031_s_stream,
- .g_mbus_config = mt9t031_g_mbus_config,
- .s_mbus_config = mt9t031_s_mbus_config,
-};
-
-static const struct v4l2_subdev_sensor_ops mt9t031_subdev_sensor_ops = {
- .g_skip_top_lines = mt9t031_g_skip_top_lines,
-};
-
-static const struct v4l2_subdev_pad_ops mt9t031_subdev_pad_ops = {
- .enum_mbus_code = mt9t031_enum_mbus_code,
- .get_selection = mt9t031_get_selection,
- .set_selection = mt9t031_set_selection,
- .get_fmt = mt9t031_get_fmt,
- .set_fmt = mt9t031_set_fmt,
-};
-
-static const struct v4l2_subdev_ops mt9t031_subdev_ops = {
- .core = &mt9t031_subdev_core_ops,
- .video = &mt9t031_subdev_video_ops,
- .sensor = &mt9t031_subdev_sensor_ops,
- .pad = &mt9t031_subdev_pad_ops,
-};
-
-static int mt9t031_probe(struct i2c_client *client,
- const struct i2c_device_id *did)
-{
- struct mt9t031 *mt9t031;
- struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
- struct i2c_adapter *adapter = client->adapter;
- int ret;
-
- if (!ssdd) {
- dev_err(&client->dev, "MT9T031 driver needs platform data\n");
- return -EINVAL;
- }
-
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) {
- dev_warn(&adapter->dev,
- "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n");
- return -EIO;
- }
-
- mt9t031 = devm_kzalloc(&client->dev, sizeof(struct mt9t031), GFP_KERNEL);
- if (!mt9t031)
- return -ENOMEM;
-
- v4l2_i2c_subdev_init(&mt9t031->subdev, client, &mt9t031_subdev_ops);
- v4l2_ctrl_handler_init(&mt9t031->hdl, 5);
- v4l2_ctrl_new_std(&mt9t031->hdl, &mt9t031_ctrl_ops,
- V4L2_CID_VFLIP, 0, 1, 1, 0);
- v4l2_ctrl_new_std(&mt9t031->hdl, &mt9t031_ctrl_ops,
- V4L2_CID_HFLIP, 0, 1, 1, 0);
- v4l2_ctrl_new_std(&mt9t031->hdl, &mt9t031_ctrl_ops,
- V4L2_CID_GAIN, 0, 127, 1, 64);
-
- /*
- * Simulated autoexposure. If enabled, we calculate shutter width
- * ourselves in the driver based on vertical blanking and frame width
- */
- mt9t031->autoexposure = v4l2_ctrl_new_std_menu(&mt9t031->hdl,
- &mt9t031_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, 1, 0,
- V4L2_EXPOSURE_AUTO);
- mt9t031->exposure = v4l2_ctrl_new_std(&mt9t031->hdl, &mt9t031_ctrl_ops,
- V4L2_CID_EXPOSURE, 1, 255, 1, 255);
-
- mt9t031->subdev.ctrl_handler = &mt9t031->hdl;
- if (mt9t031->hdl.error)
- return mt9t031->hdl.error;
-
- v4l2_ctrl_auto_cluster(2, &mt9t031->autoexposure,
- V4L2_EXPOSURE_MANUAL, true);
-
- mt9t031->y_skip_top = 0;
- mt9t031->rect.left = MT9T031_COLUMN_SKIP;
- mt9t031->rect.top = MT9T031_ROW_SKIP;
- mt9t031->rect.width = MT9T031_MAX_WIDTH;
- mt9t031->rect.height = MT9T031_MAX_HEIGHT;
-
- mt9t031->xskip = 1;
- mt9t031->yskip = 1;
-
- mt9t031->clk = v4l2_clk_get(&client->dev, "mclk");
- if (IS_ERR(mt9t031->clk)) {
- ret = PTR_ERR(mt9t031->clk);
- goto eclkget;
- }
-
- ret = mt9t031_video_probe(client);
- if (ret) {
- v4l2_clk_put(mt9t031->clk);
-eclkget:
- v4l2_ctrl_handler_free(&mt9t031->hdl);
- }
-
- return ret;
-}
-
-static int mt9t031_remove(struct i2c_client *client)
-{
- struct mt9t031 *mt9t031 = to_mt9t031(client);
-
- v4l2_clk_put(mt9t031->clk);
- v4l2_device_unregister_subdev(&mt9t031->subdev);
- v4l2_ctrl_handler_free(&mt9t031->hdl);
-
- return 0;
-}
-
-static const struct i2c_device_id mt9t031_id[] = {
- { "mt9t031", 0 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, mt9t031_id);
-
-static struct i2c_driver mt9t031_i2c_driver = {
- .driver = {
- .name = "mt9t031",
- },
- .probe = mt9t031_probe,
- .remove = mt9t031_remove,
- .id_table = mt9t031_id,
-};
-
-module_i2c_driver(mt9t031_i2c_driver);
-
-MODULE_DESCRIPTION("Micron MT9T031 Camera driver");
-MODULE_AUTHOR("Guennadi Liakhovetski <lg@denx.de>");
-MODULE_LICENSE("GPL v2");
+++ /dev/null
-.. SPDX-License-Identifier: GPL-2.0
-
-The Soc-Camera Drivers
-======================
-
-Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
-
-Terminology
------------
-
-The following terms are used in this document:
- - camera / camera device / camera sensor - a video-camera sensor chip, capable
- of connecting to a variety of systems and interfaces, typically uses i2c for
- control and configuration, and a parallel or a serial bus for data.
- - camera host - an interface, to which a camera is connected. Typically a
- specialised interface, present on many SoCs, e.g. PXA27x and PXA3xx, SuperH,
- i.MX27, i.MX31.
- - camera host bus - a connection between a camera host and a camera. Can be
- parallel or serial, consists of data and control lines, e.g. clock, vertical
- and horizontal synchronization signals.
-
-Purpose of the soc-camera subsystem
------------------------------------
-
-The soc-camera subsystem initially provided a unified API between camera host
-drivers and camera sensor drivers. Later the soc-camera sensor API has been
-replaced with the V4L2 standard subdev API. This also made camera driver re-use
-with non-soc-camera hosts possible. The camera host API to the soc-camera core
-has been preserved.
-
-Soc-camera implements a V4L2 interface to the user, currently only the "mmap"
-method is supported by host drivers. However, the soc-camera core also provides
-support for the "read" method.
-
-The subsystem has been designed to support multiple camera host interfaces and
-multiple cameras per interface, although most applications have only one camera
-sensor.
-
-Existing drivers
-----------------
-
-As of 3.7 there are seven host drivers in the mainline: atmel-isi.c,
-mx1_camera.c (broken, scheduled for removal), mx2_camera.c, mx3_camera.c,
-omap1_camera.c, pxa_camera.c, sh_mobile_ceu_camera.c, and multiple sensor
-drivers under drivers/media/i2c/soc_camera/.
-
-Camera host API
----------------
-
-A host camera driver is registered using the
-
-.. code-block:: none
-
- soc_camera_host_register(struct soc_camera_host *);
-
-function. The host object can be initialized as follows:
-
-.. code-block:: none
-
- struct soc_camera_host *ici;
- ici->drv_name = DRV_NAME;
- ici->ops = &camera_host_ops;
- ici->priv = pcdev;
- ici->v4l2_dev.dev = &pdev->dev;
- ici->nr = pdev->id;
-
-All camera host methods are passed in a struct soc_camera_host_ops:
-
-.. code-block:: none
-
- static struct soc_camera_host_ops camera_host_ops = {
- .owner = THIS_MODULE,
- .add = camera_add_device,
- .remove = camera_remove_device,
- .set_fmt = camera_set_fmt_cap,
- .try_fmt = camera_try_fmt_cap,
- .init_videobuf2 = camera_init_videobuf2,
- .poll = camera_poll,
- .querycap = camera_querycap,
- .set_bus_param = camera_set_bus_param,
- /* The rest of host operations are optional */
- };
-
-.add and .remove methods are called when a sensor is attached to or detached
-from the host. .set_bus_param is used to configure physical connection
-parameters between the host and the sensor. .init_videobuf2 is called by
-soc-camera core when a video-device is opened, the host driver would typically
-call vb2_queue_init() in this method. Further video-buffer management is
-implemented completely by the specific camera host driver. If the host driver
-supports non-standard pixel format conversion, it should implement a
-.get_formats and, possibly, a .put_formats operations. See below for more
-details about format conversion. The rest of the methods are called from
-respective V4L2 operations.
-
-Camera API
-----------
-
-Sensor drivers can use struct soc_camera_link, typically provided by the
-platform, and used to specify to which camera host bus the sensor is connected,
-and optionally provide platform .power and .reset methods for the camera. This
-struct is provided to the camera driver via the I2C client device platform data
-and can be obtained, using the soc_camera_i2c_to_link() macro. Care should be
-taken, when using soc_camera_vdev_to_subdev() and when accessing struct
-soc_camera_device, using v4l2_get_subdev_hostdata(): both only work, when
-running on an soc-camera host. The actual camera driver operation is implemented
-using the V4L2 subdev API. Additionally soc-camera camera drivers can use
-auxiliary soc-camera helper functions like soc_camera_power_on() and
-soc_camera_power_off(), which switch regulators, provided by the platform and call
-board-specific power switching methods. soc_camera_apply_board_flags() takes
-camera bus configuration capability flags and applies any board transformations,
-e.g. signal polarity inversion. soc_mbus_get_fmtdesc() can be used to obtain a
-pixel format descriptor, corresponding to a certain media-bus pixel format code.
-soc_camera_limit_side() can be used to restrict beginning and length of a frame
-side, based on camera capabilities.
-
-VIDIOC_S_CROP and VIDIOC_S_FMT behaviour
-----------------------------------------
-
-Above user ioctls modify image geometry as follows:
-
-VIDIOC_S_CROP: sets location and sizes of the sensor window. Unit is one sensor
-pixel. Changing sensor window sizes preserves any scaling factors, therefore
-user window sizes change as well.
-
-VIDIOC_S_FMT: sets user window. Should preserve previously set sensor window as
-much as possible by modifying scaling factors. If the sensor window cannot be
-preserved precisely, it may be changed too.
-
-In soc-camera there are two locations, where scaling and cropping can take
-place: in the camera driver and in the host driver. User ioctls are first passed
-to the host driver, which then generally passes them down to the camera driver.
-It is more efficient to perform scaling and cropping in the camera driver to
-save camera bus bandwidth and maximise the framerate. However, if the camera
-driver failed to set the required parameters with sufficient precision, the host
-driver may decide to also use its own scaling and cropping to fulfill the user's
-request.
-
-Camera drivers are interfaced to the soc-camera core and to host drivers over
-the v4l2-subdev API, which is completely functional, it doesn't pass any data.
-Therefore all camera drivers shall reply to .g_fmt() requests with their current
-output geometry. This is necessary to correctly configure the camera bus.
-.s_fmt() and .try_fmt() have to be implemented too. Sensor window and scaling
-factors have to be maintained by camera drivers internally. According to the
-V4L2 API all capture drivers must support the VIDIOC_CROPCAP ioctl, hence we
-rely on camera drivers implementing .cropcap(). If the camera driver does not
-support cropping, it may choose to not implement .s_crop(), but to enable
-cropping support by the camera host driver at least the .g_crop method must be
-implemented.
-
-User window geometry is kept in .user_width and .user_height fields in struct
-soc_camera_device and used by the soc-camera core and host drivers. The core
-updates these fields upon successful completion of a .s_fmt() call, but if these
-fields change elsewhere, e.g. during .s_crop() processing, the host driver is
-responsible for updating them.
-
-Format conversion
------------------
-
-V4L2 distinguishes between pixel formats, as they are stored in memory, and as
-they are transferred over a media bus. Soc-camera provides support to
-conveniently manage these formats. A table of standard transformations is
-maintained by soc-camera core, which describes, what FOURCC pixel format will
-be obtained, if a media-bus pixel format is stored in memory according to
-certain rules. E.g. if MEDIA_BUS_FMT_YUYV8_2X8 data is sampled with 8 bits per
-sample and stored in memory in the little-endian order with no gaps between
-bytes, data in memory will represent the V4L2_PIX_FMT_YUYV FOURCC format. These
-standard transformations will be used by soc-camera or by camera host drivers to
-configure camera drivers to produce the FOURCC format, requested by the user,
-using the VIDIOC_S_FMT ioctl(). Apart from those standard format conversions,
-host drivers can also provide their own conversion rules by implementing a
-.get_formats and, if required, a .put_formats methods.
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * camera image capture (abstract) bus driver
- *
- * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
- *
- * This driver provides an interface between platform-specific camera
- * buses and camera devices. It should be used if the camera is
- * connected not over a "proper" bus like PCI or USB, but over a
- * special bus, like, for example, the Quick Capture interface on PXA270
- * SoCs. Later it should also be used for i.MX31 SoCs from Freescale.
- * It can handle multiple cameras and / or multiple buses, which can
- * be used, e.g., in stereo-vision applications.
- */
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/of_graph.h>
-#include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
-#include <linux/regulator/consumer.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-
-#include <media/soc_camera.h>
-#include <media/drv-intf/soc_mediabus.h>
-#include <media/v4l2-async.h>
-#include <media/v4l2-clk.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-dev.h>
-#include <media/v4l2-fwnode.h>
-#include <media/videobuf2-v4l2.h>
-
-/* Default to VGA resolution */
-#define DEFAULT_WIDTH 640
-#define DEFAULT_HEIGHT 480
-
-#define MAP_MAX_NUM 32
-static DECLARE_BITMAP(device_map, MAP_MAX_NUM);
-static LIST_HEAD(hosts);
-static LIST_HEAD(devices);
-/*
- * Protects lists and bitmaps of hosts and devices.
- * Lock nesting: Ok to take ->host_lock under list_lock.
- */
-static DEFINE_MUTEX(list_lock);
-
-struct soc_camera_async_client {
- struct v4l2_async_subdev *sensor;
- struct v4l2_async_notifier notifier;
- struct platform_device *pdev;
- struct list_head list; /* needed for clean up */
-};
-
-static int soc_camera_video_start(struct soc_camera_device *icd);
-static int video_dev_create(struct soc_camera_device *icd);
-
-int soc_camera_power_on(struct device *dev, struct soc_camera_subdev_desc *ssdd,
- struct v4l2_clk *clk)
-{
- int ret;
- bool clock_toggle;
-
- if (clk && (!ssdd->unbalanced_power ||
- !test_and_set_bit(0, &ssdd->clock_state))) {
- ret = v4l2_clk_enable(clk);
- if (ret < 0) {
- dev_err(dev, "Cannot enable clock: %d\n", ret);
- return ret;
- }
- clock_toggle = true;
- } else {
- clock_toggle = false;
- }
-
- ret = regulator_bulk_enable(ssdd->sd_pdata.num_regulators,
- ssdd->sd_pdata.regulators);
- if (ret < 0) {
- dev_err(dev, "Cannot enable regulators\n");
- goto eregenable;
- }
-
- if (ssdd->power) {
- ret = ssdd->power(dev, 1);
- if (ret < 0) {
- dev_err(dev,
- "Platform failed to power-on the camera.\n");
- goto epwron;
- }
- }
-
- return 0;
-
-epwron:
- regulator_bulk_disable(ssdd->sd_pdata.num_regulators,
- ssdd->sd_pdata.regulators);
-eregenable:
- if (clock_toggle)
- v4l2_clk_disable(clk);
-
- return ret;
-}
-EXPORT_SYMBOL(soc_camera_power_on);
-
-int soc_camera_power_off(struct device *dev, struct soc_camera_subdev_desc *ssdd,
- struct v4l2_clk *clk)
-{
- int ret = 0;
- int err;
-
- if (ssdd->power) {
- err = ssdd->power(dev, 0);
- if (err < 0) {
- dev_err(dev,
- "Platform failed to power-off the camera.\n");
- ret = err;
- }
- }
-
- err = regulator_bulk_disable(ssdd->sd_pdata.num_regulators,
- ssdd->sd_pdata.regulators);
- if (err < 0) {
- dev_err(dev, "Cannot disable regulators\n");
- ret = ret ? : err;
- }
-
- if (clk && (!ssdd->unbalanced_power || test_and_clear_bit(0, &ssdd->clock_state)))
- v4l2_clk_disable(clk);
-
- return ret;
-}
-EXPORT_SYMBOL(soc_camera_power_off);
-
-int soc_camera_power_init(struct device *dev, struct soc_camera_subdev_desc *ssdd)
-{
- /* Should not have any effect in synchronous case */
- return devm_regulator_bulk_get(dev, ssdd->sd_pdata.num_regulators,
- ssdd->sd_pdata.regulators);
-}
-EXPORT_SYMBOL(soc_camera_power_init);
-
-static int __soc_camera_power_on(struct soc_camera_device *icd)
-{
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- int ret;
-
- ret = v4l2_subdev_call(sd, core, s_power, 1);
- if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV)
- return ret;
-
- return 0;
-}
-
-static int __soc_camera_power_off(struct soc_camera_device *icd)
-{
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- int ret;
-
- ret = v4l2_subdev_call(sd, core, s_power, 0);
- if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV)
- return ret;
-
- return 0;
-}
-
-static int soc_camera_clock_start(struct soc_camera_host *ici)
-{
- int ret;
-
- if (!ici->ops->clock_start)
- return 0;
-
- mutex_lock(&ici->clk_lock);
- ret = ici->ops->clock_start(ici);
- mutex_unlock(&ici->clk_lock);
-
- return ret;
-}
-
-static void soc_camera_clock_stop(struct soc_camera_host *ici)
-{
- if (!ici->ops->clock_stop)
- return;
-
- mutex_lock(&ici->clk_lock);
- ici->ops->clock_stop(ici);
- mutex_unlock(&ici->clk_lock);
-}
-
-const struct soc_camera_format_xlate *soc_camera_xlate_by_fourcc(
- struct soc_camera_device *icd, unsigned int fourcc)
-{
- unsigned int i;
-
- for (i = 0; i < icd->num_user_formats; i++)
- if (icd->user_formats[i].host_fmt->fourcc == fourcc)
- return icd->user_formats + i;
- return NULL;
-}
-EXPORT_SYMBOL(soc_camera_xlate_by_fourcc);
-
-/**
- * soc_camera_apply_board_flags() - apply platform SOCAM_SENSOR_INVERT_* flags
- * @ssdd: camera platform parameters
- * @cfg: media bus configuration
- * @return: resulting flags
- */
-unsigned long soc_camera_apply_board_flags(struct soc_camera_subdev_desc *ssdd,
- const struct v4l2_mbus_config *cfg)
-{
- unsigned long f, flags = cfg->flags;
-
- /* If only one of the two polarities is supported, switch to the opposite */
- if (ssdd->flags & SOCAM_SENSOR_INVERT_HSYNC) {
- f = flags & (V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW);
- if (f == V4L2_MBUS_HSYNC_ACTIVE_HIGH || f == V4L2_MBUS_HSYNC_ACTIVE_LOW)
- flags ^= V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW;
- }
-
- if (ssdd->flags & SOCAM_SENSOR_INVERT_VSYNC) {
- f = flags & (V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW);
- if (f == V4L2_MBUS_VSYNC_ACTIVE_HIGH || f == V4L2_MBUS_VSYNC_ACTIVE_LOW)
- flags ^= V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW;
- }
-
- if (ssdd->flags & SOCAM_SENSOR_INVERT_PCLK) {
- f = flags & (V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING);
- if (f == V4L2_MBUS_PCLK_SAMPLE_RISING || f == V4L2_MBUS_PCLK_SAMPLE_FALLING)
- flags ^= V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING;
- }
-
- return flags;
-}
-EXPORT_SYMBOL(soc_camera_apply_board_flags);
-
-#define pixfmtstr(x) (x) & 0xff, ((x) >> 8) & 0xff, ((x) >> 16) & 0xff, \
- ((x) >> 24) & 0xff
-
-static int soc_camera_try_fmt(struct soc_camera_device *icd,
- struct v4l2_format *f)
-{
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- const struct soc_camera_format_xlate *xlate;
- struct v4l2_pix_format *pix = &f->fmt.pix;
- int ret;
-
- dev_dbg(icd->pdev, "TRY_FMT(%c%c%c%c, %ux%u)\n",
- pixfmtstr(pix->pixelformat), pix->width, pix->height);
-
- if (pix->pixelformat != V4L2_PIX_FMT_JPEG &&
- !(ici->capabilities & SOCAM_HOST_CAP_STRIDE)) {
- pix->bytesperline = 0;
- pix->sizeimage = 0;
- }
-
- ret = ici->ops->try_fmt(icd, f);
- if (ret < 0)
- return ret;
-
- xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
- if (!xlate)
- return -EINVAL;
-
- ret = soc_mbus_bytes_per_line(pix->width, xlate->host_fmt);
- if (ret < 0)
- return ret;
-
- pix->bytesperline = max_t(u32, pix->bytesperline, ret);
-
- ret = soc_mbus_image_size(xlate->host_fmt, pix->bytesperline,
- pix->height);
- if (ret < 0)
- return ret;
-
- pix->sizeimage = max_t(u32, pix->sizeimage, ret);
-
- return 0;
-}
-
-static int soc_camera_try_fmt_vid_cap(struct file *file, void *priv,
- struct v4l2_format *f)
-{
- struct soc_camera_device *icd = file->private_data;
-
- WARN_ON(priv != file->private_data);
-
- /* Only single-plane capture is supported so far */
- if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- /* limit format to hardware capabilities */
- return soc_camera_try_fmt(icd, f);
-}
-
-static int soc_camera_enum_input(struct file *file, void *priv,
- struct v4l2_input *inp)
-{
- struct soc_camera_device *icd = file->private_data;
-
- if (inp->index != 0)
- return -EINVAL;
-
- /* default is camera */
- inp->type = V4L2_INPUT_TYPE_CAMERA;
- inp->std = icd->vdev->tvnorms;
- strscpy(inp->name, "Camera", sizeof(inp->name));
-
- return 0;
-}
-
-static int soc_camera_g_input(struct file *file, void *priv, unsigned int *i)
-{
- *i = 0;
-
- return 0;
-}
-
-static int soc_camera_s_input(struct file *file, void *priv, unsigned int i)
-{
- if (i > 0)
- return -EINVAL;
-
- return 0;
-}
-
-static int soc_camera_s_std(struct file *file, void *priv, v4l2_std_id a)
-{
- struct soc_camera_device *icd = file->private_data;
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-
- return v4l2_subdev_call(sd, video, s_std, a);
-}
-
-static int soc_camera_g_std(struct file *file, void *priv, v4l2_std_id *a)
-{
- struct soc_camera_device *icd = file->private_data;
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-
- return v4l2_subdev_call(sd, video, g_std, a);
-}
-
-static int soc_camera_enum_framesizes(struct file *file, void *fh,
- struct v4l2_frmsizeenum *fsize)
-{
- struct soc_camera_device *icd = file->private_data;
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
-
- return ici->ops->enum_framesizes(icd, fsize);
-}
-
-static int soc_camera_reqbufs(struct file *file, void *priv,
- struct v4l2_requestbuffers *p)
-{
- int ret;
- struct soc_camera_device *icd = file->private_data;
-
- WARN_ON(priv != file->private_data);
-
- if (icd->streamer && icd->streamer != file)
- return -EBUSY;
-
- ret = vb2_reqbufs(&icd->vb2_vidq, p);
- if (!ret)
- icd->streamer = p->count ? file : NULL;
- return ret;
-}
-
-static int soc_camera_querybuf(struct file *file, void *priv,
- struct v4l2_buffer *p)
-{
- struct soc_camera_device *icd = file->private_data;
-
- WARN_ON(priv != file->private_data);
-
- return vb2_querybuf(&icd->vb2_vidq, p);
-}
-
-static int soc_camera_qbuf(struct file *file, void *priv,
- struct v4l2_buffer *p)
-{
- struct soc_camera_device *icd = file->private_data;
-
- WARN_ON(priv != file->private_data);
-
- if (icd->streamer != file)
- return -EBUSY;
-
- return vb2_qbuf(&icd->vb2_vidq, NULL, p);
-}
-
-static int soc_camera_dqbuf(struct file *file, void *priv,
- struct v4l2_buffer *p)
-{
- struct soc_camera_device *icd = file->private_data;
-
- WARN_ON(priv != file->private_data);
-
- if (icd->streamer != file)
- return -EBUSY;
-
- return vb2_dqbuf(&icd->vb2_vidq, p, file->f_flags & O_NONBLOCK);
-}
-
-static int soc_camera_create_bufs(struct file *file, void *priv,
- struct v4l2_create_buffers *create)
-{
- struct soc_camera_device *icd = file->private_data;
- int ret;
-
- if (icd->streamer && icd->streamer != file)
- return -EBUSY;
-
- ret = vb2_create_bufs(&icd->vb2_vidq, create);
- if (!ret)
- icd->streamer = file;
- return ret;
-}
-
-static int soc_camera_prepare_buf(struct file *file, void *priv,
- struct v4l2_buffer *b)
-{
- struct soc_camera_device *icd = file->private_data;
-
- return vb2_prepare_buf(&icd->vb2_vidq, NULL, b);
-}
-
-static int soc_camera_expbuf(struct file *file, void *priv,
- struct v4l2_exportbuffer *p)
-{
- struct soc_camera_device *icd = file->private_data;
-
- if (icd->streamer && icd->streamer != file)
- return -EBUSY;
- return vb2_expbuf(&icd->vb2_vidq, p);
-}
-
-/* Always entered with .host_lock held */
-static int soc_camera_init_user_formats(struct soc_camera_device *icd)
-{
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- unsigned int i, fmts = 0, raw_fmts = 0;
- int ret;
- struct v4l2_subdev_mbus_code_enum code = {
- .which = V4L2_SUBDEV_FORMAT_ACTIVE,
- };
-
- while (!v4l2_subdev_call(sd, pad, enum_mbus_code, NULL, &code)) {
- raw_fmts++;
- code.index++;
- }
-
- if (!ici->ops->get_formats)
- /*
- * Fallback mode - the host will have to serve all
- * sensor-provided formats one-to-one to the user
- */
- fmts = raw_fmts;
- else
- /*
- * First pass - only count formats this host-sensor
- * configuration can provide
- */
- for (i = 0; i < raw_fmts; i++) {
- ret = ici->ops->get_formats(icd, i, NULL);
- if (ret < 0)
- return ret;
- fmts += ret;
- }
-
- if (!fmts)
- return -ENXIO;
-
- icd->user_formats =
- vmalloc(array_size(fmts,
- sizeof(struct soc_camera_format_xlate)));
- if (!icd->user_formats)
- return -ENOMEM;
-
- dev_dbg(icd->pdev, "Found %d supported formats.\n", fmts);
-
- /* Second pass - actually fill data formats */
- fmts = 0;
- for (i = 0; i < raw_fmts; i++)
- if (!ici->ops->get_formats) {
- code.index = i;
- v4l2_subdev_call(sd, pad, enum_mbus_code, NULL, &code);
- icd->user_formats[fmts].host_fmt =
- soc_mbus_get_fmtdesc(code.code);
- if (icd->user_formats[fmts].host_fmt)
- icd->user_formats[fmts++].code = code.code;
- } else {
- ret = ici->ops->get_formats(icd, i,
- &icd->user_formats[fmts]);
- if (ret < 0)
- goto egfmt;
- fmts += ret;
- }
-
- icd->num_user_formats = fmts;
- icd->current_fmt = &icd->user_formats[0];
-
- return 0;
-
-egfmt:
- vfree(icd->user_formats);
- return ret;
-}
-
-/* Always entered with .host_lock held */
-static void soc_camera_free_user_formats(struct soc_camera_device *icd)
-{
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
-
- if (ici->ops->put_formats)
- ici->ops->put_formats(icd);
- icd->current_fmt = NULL;
- icd->num_user_formats = 0;
- vfree(icd->user_formats);
- icd->user_formats = NULL;
-}
-
-/* Called with .vb_lock held, or from the first open(2), see comment there */
-static int soc_camera_set_fmt(struct soc_camera_device *icd,
- struct v4l2_format *f)
-{
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- struct v4l2_pix_format *pix = &f->fmt.pix;
- int ret;
-
- dev_dbg(icd->pdev, "S_FMT(%c%c%c%c, %ux%u)\n",
- pixfmtstr(pix->pixelformat), pix->width, pix->height);
-
- /* We always call try_fmt() before set_fmt() or set_selection() */
- ret = soc_camera_try_fmt(icd, f);
- if (ret < 0)
- return ret;
-
- ret = ici->ops->set_fmt(icd, f);
- if (ret < 0) {
- return ret;
- } else if (!icd->current_fmt ||
- icd->current_fmt->host_fmt->fourcc != pix->pixelformat) {
- dev_err(icd->pdev,
- "Host driver hasn't set up current format correctly!\n");
- return -EINVAL;
- }
-
- icd->user_width = pix->width;
- icd->user_height = pix->height;
- icd->bytesperline = pix->bytesperline;
- icd->sizeimage = pix->sizeimage;
- icd->colorspace = pix->colorspace;
- icd->field = pix->field;
-
- dev_dbg(icd->pdev, "set width: %d height: %d\n",
- icd->user_width, icd->user_height);
-
- /* set physical bus parameters */
- return ici->ops->set_bus_param(icd);
-}
-
-static int soc_camera_add_device(struct soc_camera_device *icd)
-{
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- int ret;
-
- if (ici->icd)
- return -EBUSY;
-
- if (!icd->clk) {
- ret = soc_camera_clock_start(ici);
- if (ret < 0)
- return ret;
- }
-
- if (ici->ops->add) {
- ret = ici->ops->add(icd);
- if (ret < 0)
- goto eadd;
- }
-
- ici->icd = icd;
-
- return 0;
-
-eadd:
- if (!icd->clk)
- soc_camera_clock_stop(ici);
- return ret;
-}
-
-static void soc_camera_remove_device(struct soc_camera_device *icd)
-{
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
-
- if (WARN_ON(icd != ici->icd))
- return;
-
- if (ici->ops->remove)
- ici->ops->remove(icd);
- if (!icd->clk)
- soc_camera_clock_stop(ici);
- ici->icd = NULL;
-}
-
-static int soc_camera_open(struct file *file)
-{
- struct video_device *vdev = video_devdata(file);
- struct soc_camera_device *icd;
- struct soc_camera_host *ici;
- int ret;
-
- /*
- * Don't mess with the host during probe: wait until the loop in
- * scan_add_host() completes. Also protect against a race with
- * soc_camera_host_unregister().
- */
- if (mutex_lock_interruptible(&list_lock))
- return -ERESTARTSYS;
-
- if (!vdev || !video_is_registered(vdev)) {
- mutex_unlock(&list_lock);
- return -ENODEV;
- }
-
- icd = video_get_drvdata(vdev);
- ici = to_soc_camera_host(icd->parent);
-
- ret = try_module_get(ici->ops->owner) ? 0 : -ENODEV;
- mutex_unlock(&list_lock);
-
- if (ret < 0) {
- dev_err(icd->pdev, "Couldn't lock capture bus driver.\n");
- return ret;
- }
-
- if (!to_soc_camera_control(icd)) {
- /* No device driver attached */
- ret = -ENODEV;
- goto econtrol;
- }
-
- if (mutex_lock_interruptible(&ici->host_lock)) {
- ret = -ERESTARTSYS;
- goto elockhost;
- }
- icd->use_count++;
-
- /* Now we really have to activate the camera */
- if (icd->use_count == 1) {
- struct soc_camera_desc *sdesc = to_soc_camera_desc(icd);
- /* Restore parameters before the last close() per V4L2 API */
- struct v4l2_format f = {
- .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
- .fmt.pix = {
- .width = icd->user_width,
- .height = icd->user_height,
- .field = icd->field,
- .colorspace = icd->colorspace,
- .pixelformat =
- icd->current_fmt->host_fmt->fourcc,
- },
- };
-
- /* The camera could have been already on, try to reset */
- if (sdesc->subdev_desc.reset)
- if (icd->control)
- sdesc->subdev_desc.reset(icd->control);
-
- ret = soc_camera_add_device(icd);
- if (ret < 0) {
- dev_err(icd->pdev, "Couldn't activate the camera: %d\n", ret);
- goto eiciadd;
- }
-
- ret = __soc_camera_power_on(icd);
- if (ret < 0)
- goto epower;
-
- pm_runtime_enable(&icd->vdev->dev);
- ret = pm_runtime_resume(&icd->vdev->dev);
- if (ret < 0 && ret != -ENOSYS)
- goto eresume;
-
- /*
- * Try to configure with default parameters. Notice: this is the
- * very first open, so, we cannot race against other calls,
- * apart from someone else calling open() simultaneously, but
- * .host_lock is protecting us against it.
- */
- ret = soc_camera_set_fmt(icd, &f);
- if (ret < 0)
- goto esfmt;
-
- ret = ici->ops->init_videobuf2(&icd->vb2_vidq, icd);
- if (ret < 0)
- goto einitvb;
- v4l2_ctrl_handler_setup(&icd->ctrl_handler);
- }
- mutex_unlock(&ici->host_lock);
-
- file->private_data = icd;
- dev_dbg(icd->pdev, "camera device open\n");
-
- return 0;
-
- /*
- * All errors are entered with the .host_lock held, first four also
- * with use_count == 1
- */
-einitvb:
-esfmt:
- pm_runtime_disable(&icd->vdev->dev);
-eresume:
- __soc_camera_power_off(icd);
-epower:
- soc_camera_remove_device(icd);
-eiciadd:
- icd->use_count--;
- mutex_unlock(&ici->host_lock);
-elockhost:
-econtrol:
- module_put(ici->ops->owner);
-
- return ret;
-}
-
-static int soc_camera_close(struct file *file)
-{
- struct soc_camera_device *icd = file->private_data;
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
-
- mutex_lock(&ici->host_lock);
- if (icd->streamer == file) {
- if (ici->ops->init_videobuf2)
- vb2_queue_release(&icd->vb2_vidq);
- icd->streamer = NULL;
- }
- icd->use_count--;
- if (!icd->use_count) {
- pm_runtime_suspend(&icd->vdev->dev);
- pm_runtime_disable(&icd->vdev->dev);
-
- __soc_camera_power_off(icd);
-
- soc_camera_remove_device(icd);
- }
-
- mutex_unlock(&ici->host_lock);
-
- module_put(ici->ops->owner);
-
- dev_dbg(icd->pdev, "camera device close\n");
-
- return 0;
-}
-
-static ssize_t soc_camera_read(struct file *file, char __user *buf,
- size_t count, loff_t *ppos)
-{
- struct soc_camera_device *icd = file->private_data;
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
-
- dev_dbg(icd->pdev, "read called, buf %p\n", buf);
-
- if (ici->ops->init_videobuf2 && icd->vb2_vidq.io_modes & VB2_READ)
- return vb2_read(&icd->vb2_vidq, buf, count, ppos,
- file->f_flags & O_NONBLOCK);
-
- dev_err(icd->pdev, "camera device read not implemented\n");
-
- return -EINVAL;
-}
-
-static int soc_camera_mmap(struct file *file, struct vm_area_struct *vma)
-{
- struct soc_camera_device *icd = file->private_data;
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- int err;
-
- dev_dbg(icd->pdev, "mmap called, vma=%p\n", vma);
-
- if (icd->streamer != file)
- return -EBUSY;
-
- if (mutex_lock_interruptible(&ici->host_lock))
- return -ERESTARTSYS;
- err = vb2_mmap(&icd->vb2_vidq, vma);
- mutex_unlock(&ici->host_lock);
-
- dev_dbg(icd->pdev, "vma start=0x%08lx, size=%ld, ret=%d\n",
- (unsigned long)vma->vm_start,
- (unsigned long)vma->vm_end - (unsigned long)vma->vm_start,
- err);
-
- return err;
-}
-
-static __poll_t soc_camera_poll(struct file *file, poll_table *pt)
-{
- struct soc_camera_device *icd = file->private_data;
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- __poll_t res = EPOLLERR;
-
- if (icd->streamer != file)
- return EPOLLERR;
-
- mutex_lock(&ici->host_lock);
- res = ici->ops->poll(file, pt);
- mutex_unlock(&ici->host_lock);
- return res;
-}
-
-static const struct v4l2_file_operations soc_camera_fops = {
- .owner = THIS_MODULE,
- .open = soc_camera_open,
- .release = soc_camera_close,
- .unlocked_ioctl = video_ioctl2,
- .read = soc_camera_read,
- .mmap = soc_camera_mmap,
- .poll = soc_camera_poll,
-};
-
-static int soc_camera_s_fmt_vid_cap(struct file *file, void *priv,
- struct v4l2_format *f)
-{
- struct soc_camera_device *icd = file->private_data;
- int ret;
-
- WARN_ON(priv != file->private_data);
-
- if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
- dev_warn(icd->pdev, "Wrong buf-type %d\n", f->type);
- return -EINVAL;
- }
-
- if (icd->streamer && icd->streamer != file)
- return -EBUSY;
-
- if (vb2_is_streaming(&icd->vb2_vidq)) {
- dev_err(icd->pdev, "S_FMT denied: queue initialised\n");
- return -EBUSY;
- }
-
- ret = soc_camera_set_fmt(icd, f);
-
- if (!ret && !icd->streamer)
- icd->streamer = file;
-
- return ret;
-}
-
-static int soc_camera_enum_fmt_vid_cap(struct file *file, void *priv,
- struct v4l2_fmtdesc *f)
-{
- struct soc_camera_device *icd = file->private_data;
- const struct soc_mbus_pixelfmt *format;
-
- WARN_ON(priv != file->private_data);
-
- if (f->index >= icd->num_user_formats)
- return -EINVAL;
-
- format = icd->user_formats[f->index].host_fmt;
-
- f->pixelformat = format->fourcc;
- return 0;
-}
-
-static int soc_camera_g_fmt_vid_cap(struct file *file, void *priv,
- struct v4l2_format *f)
-{
- struct soc_camera_device *icd = file->private_data;
- struct v4l2_pix_format *pix = &f->fmt.pix;
-
- WARN_ON(priv != file->private_data);
-
- if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- pix->width = icd->user_width;
- pix->height = icd->user_height;
- pix->bytesperline = icd->bytesperline;
- pix->sizeimage = icd->sizeimage;
- pix->field = icd->field;
- pix->pixelformat = icd->current_fmt->host_fmt->fourcc;
- pix->colorspace = icd->colorspace;
- dev_dbg(icd->pdev, "current_fmt->fourcc: 0x%08x\n",
- icd->current_fmt->host_fmt->fourcc);
- return 0;
-}
-
-static int soc_camera_querycap(struct file *file, void *priv,
- struct v4l2_capability *cap)
-{
- struct soc_camera_device *icd = file->private_data;
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
-
- WARN_ON(priv != file->private_data);
-
- strscpy(cap->driver, ici->drv_name, sizeof(cap->driver));
- return ici->ops->querycap(ici, cap);
-}
-
-static int soc_camera_streamon(struct file *file, void *priv,
- enum v4l2_buf_type i)
-{
- struct soc_camera_device *icd = file->private_data;
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- int ret;
-
- WARN_ON(priv != file->private_data);
-
- if (i != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- if (icd->streamer != file)
- return -EBUSY;
-
- /* This calls buf_queue from host driver's videobuf2_queue_ops */
- ret = vb2_streamon(&icd->vb2_vidq, i);
- if (!ret)
- v4l2_subdev_call(sd, video, s_stream, 1);
-
- return ret;
-}
-
-static int soc_camera_streamoff(struct file *file, void *priv,
- enum v4l2_buf_type i)
-{
- struct soc_camera_device *icd = file->private_data;
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- int ret;
-
- WARN_ON(priv != file->private_data);
-
- if (i != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- if (icd->streamer != file)
- return -EBUSY;
-
- /*
- * This calls buf_release from host driver's videobuf2_queue_ops for all
- * remaining buffers. When the last buffer is freed, stop capture
- */
- ret = vb2_streamoff(&icd->vb2_vidq, i);
-
- v4l2_subdev_call(sd, video, s_stream, 0);
-
- return ret;
-}
-
-static int soc_camera_g_selection(struct file *file, void *fh,
- struct v4l2_selection *s)
-{
- struct soc_camera_device *icd = file->private_data;
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
-
- /* With a wrong type no need to try to fall back to cropping */
- if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- return ici->ops->get_selection(icd, s);
-}
-
-static int soc_camera_s_selection(struct file *file, void *fh,
- struct v4l2_selection *s)
-{
- struct soc_camera_device *icd = file->private_data;
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- int ret;
-
- /* In all these cases cropping emulation will not help */
- if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
- (s->target != V4L2_SEL_TGT_COMPOSE &&
- s->target != V4L2_SEL_TGT_CROP))
- return -EINVAL;
-
- if (s->target == V4L2_SEL_TGT_COMPOSE) {
- /* No output size change during a running capture! */
- if (vb2_is_streaming(&icd->vb2_vidq) &&
- (icd->user_width != s->r.width ||
- icd->user_height != s->r.height))
- return -EBUSY;
-
- /*
- * Only one user is allowed to change the output format, touch
- * buffers, start / stop streaming, poll for data
- */
- if (icd->streamer && icd->streamer != file)
- return -EBUSY;
- }
-
- if (s->target == V4L2_SEL_TGT_CROP &&
- vb2_is_streaming(&icd->vb2_vidq) &&
- ici->ops->set_liveselection)
- ret = ici->ops->set_liveselection(icd, s);
- else
- ret = ici->ops->set_selection(icd, s);
- if (!ret &&
- s->target == V4L2_SEL_TGT_COMPOSE) {
- icd->user_width = s->r.width;
- icd->user_height = s->r.height;
- if (!icd->streamer)
- icd->streamer = file;
- }
-
- return ret;
-}
-
-static int soc_camera_g_parm(struct file *file, void *fh,
- struct v4l2_streamparm *a)
-{
- struct soc_camera_device *icd = file->private_data;
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
-
- if (ici->ops->get_parm)
- return ici->ops->get_parm(icd, a);
-
- return -ENOIOCTLCMD;
-}
-
-static int soc_camera_s_parm(struct file *file, void *fh,
- struct v4l2_streamparm *a)
-{
- struct soc_camera_device *icd = file->private_data;
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
-
- if (ici->ops->set_parm)
- return ici->ops->set_parm(icd, a);
-
- return -ENOIOCTLCMD;
-}
-
-static int soc_camera_probe(struct soc_camera_host *ici,
- struct soc_camera_device *icd);
-
-/* So far this function cannot fail */
-static void scan_add_host(struct soc_camera_host *ici)
-{
- struct soc_camera_device *icd;
-
- mutex_lock(&list_lock);
-
- list_for_each_entry(icd, &devices, list)
- if (icd->iface == ici->nr) {
- struct soc_camera_desc *sdesc = to_soc_camera_desc(icd);
- struct soc_camera_subdev_desc *ssdd = &sdesc->subdev_desc;
-
- /* The camera could have been already on, try to reset */
- if (ssdd->reset)
- if (icd->control)
- ssdd->reset(icd->control);
-
- icd->parent = ici->v4l2_dev.dev;
-
- /* Ignore errors */
- soc_camera_probe(ici, icd);
- }
-
- mutex_unlock(&list_lock);
-}
-
-/*
- * It is invalid to call v4l2_clk_enable() after a successful probing
- * asynchronously outside of V4L2 operations, i.e. with .host_lock not held.
- */
-static int soc_camera_clk_enable(struct v4l2_clk *clk)
-{
- struct soc_camera_device *icd = clk->priv;
- struct soc_camera_host *ici;
-
- if (!icd || !icd->parent)
- return -ENODEV;
-
- ici = to_soc_camera_host(icd->parent);
-
- if (!try_module_get(ici->ops->owner))
- return -ENODEV;
-
- /*
- * If a different client is currently being probed, the host will tell
- * you to go
- */
- return soc_camera_clock_start(ici);
-}
-
-static void soc_camera_clk_disable(struct v4l2_clk *clk)
-{
- struct soc_camera_device *icd = clk->priv;
- struct soc_camera_host *ici;
-
- if (!icd || !icd->parent)
- return;
-
- ici = to_soc_camera_host(icd->parent);
-
- soc_camera_clock_stop(ici);
-
- module_put(ici->ops->owner);
-}
-
-/*
- * Eventually, it would be more logical to make the respective host the clock
- * owner, but then we would have to copy this struct for each ici. Besides, it
- * would introduce the circular dependency problem, unless we port all client
- * drivers to release the clock, when not in use.
- */
-static const struct v4l2_clk_ops soc_camera_clk_ops = {
- .owner = THIS_MODULE,
- .enable = soc_camera_clk_enable,
- .disable = soc_camera_clk_disable,
-};
-
-static int soc_camera_dyn_pdev(struct soc_camera_desc *sdesc,
- struct soc_camera_async_client *sasc)
-{
- struct platform_device *pdev;
- int ret, i;
-
- mutex_lock(&list_lock);
- i = find_first_zero_bit(device_map, MAP_MAX_NUM);
- if (i < MAP_MAX_NUM)
- set_bit(i, device_map);
- mutex_unlock(&list_lock);
- if (i >= MAP_MAX_NUM)
- return -ENOMEM;
-
- pdev = platform_device_alloc("soc-camera-pdrv", i);
- if (!pdev)
- return -ENOMEM;
-
- ret = platform_device_add_data(pdev, sdesc, sizeof(*sdesc));
- if (ret < 0) {
- platform_device_put(pdev);
- return ret;
- }
-
- sasc->pdev = pdev;
-
- return 0;
-}
-
-static struct soc_camera_device *soc_camera_add_pdev(struct soc_camera_async_client *sasc)
-{
- struct platform_device *pdev = sasc->pdev;
- int ret;
-
- ret = platform_device_add(pdev);
- if (ret < 0 || !pdev->dev.driver)
- return NULL;
-
- return platform_get_drvdata(pdev);
-}
-
-/* Locking: called with .host_lock held */
-static int soc_camera_probe_finish(struct soc_camera_device *icd)
-{
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- struct v4l2_subdev_format fmt = {
- .which = V4L2_SUBDEV_FORMAT_ACTIVE,
- };
- struct v4l2_mbus_framefmt *mf = &fmt.format;
- int ret;
-
- sd->grp_id = soc_camera_grp_id(icd);
- v4l2_set_subdev_hostdata(sd, icd);
-
- v4l2_subdev_call(sd, video, g_tvnorms, &icd->vdev->tvnorms);
-
- ret = v4l2_ctrl_add_handler(&icd->ctrl_handler, sd->ctrl_handler,
- NULL, true);
- if (ret < 0)
- return ret;
-
- ret = soc_camera_add_device(icd);
- if (ret < 0) {
- dev_err(icd->pdev, "Couldn't activate the camera: %d\n", ret);
- return ret;
- }
-
- /* At this point client .probe() should have run already */
- ret = soc_camera_init_user_formats(icd);
- if (ret < 0)
- goto eusrfmt;
-
- icd->field = V4L2_FIELD_ANY;
-
- ret = soc_camera_video_start(icd);
- if (ret < 0)
- goto evidstart;
-
- /* Try to improve our guess of a reasonable window format */
- if (!v4l2_subdev_call(sd, pad, get_fmt, NULL, &fmt)) {
- icd->user_width = mf->width;
- icd->user_height = mf->height;
- icd->colorspace = mf->colorspace;
- icd->field = mf->field;
- }
- soc_camera_remove_device(icd);
-
- return 0;
-
-evidstart:
- soc_camera_free_user_formats(icd);
-eusrfmt:
- soc_camera_remove_device(icd);
-
- return ret;
-}
-
-#ifdef CONFIG_I2C_BOARDINFO
-static int soc_camera_i2c_init(struct soc_camera_device *icd,
- struct soc_camera_desc *sdesc)
-{
- struct soc_camera_subdev_desc *ssdd;
- struct i2c_client *client;
- struct soc_camera_host *ici;
- struct soc_camera_host_desc *shd = &sdesc->host_desc;
- struct i2c_adapter *adap;
- struct v4l2_subdev *subdev;
- char clk_name[V4L2_CLK_NAME_SIZE];
- int ret;
-
- /* First find out how we link the main client */
- if (icd->sasc) {
- /* Async non-OF probing handled by the subdevice list */
- return -EPROBE_DEFER;
- }
-
- ici = to_soc_camera_host(icd->parent);
- adap = i2c_get_adapter(shd->i2c_adapter_id);
- if (!adap) {
- dev_err(icd->pdev, "Cannot get I2C adapter #%d. No driver?\n",
- shd->i2c_adapter_id);
- return -ENODEV;
- }
-
- ssdd = kmemdup(&sdesc->subdev_desc, sizeof(*ssdd), GFP_KERNEL);
- if (!ssdd) {
- ret = -ENOMEM;
- goto ealloc;
- }
- /*
- * In synchronous case we request regulators ourselves in
- * soc_camera_pdrv_probe(), make sure the subdevice driver doesn't try
- * to allocate them again.
- */
- ssdd->sd_pdata.num_regulators = 0;
- ssdd->sd_pdata.regulators = NULL;
- shd->board_info->platform_data = ssdd;
-
- v4l2_clk_name_i2c(clk_name, sizeof(clk_name),
- shd->i2c_adapter_id, shd->board_info->addr);
-
- icd->clk = v4l2_clk_register(&soc_camera_clk_ops, clk_name, icd);
- if (IS_ERR(icd->clk)) {
- ret = PTR_ERR(icd->clk);
- goto eclkreg;
- }
-
- subdev = v4l2_i2c_new_subdev_board(&ici->v4l2_dev, adap,
- shd->board_info, NULL);
- if (!subdev) {
- ret = -ENODEV;
- goto ei2cnd;
- }
-
- client = v4l2_get_subdevdata(subdev);
-
- /* Use to_i2c_client(dev) to recover the i2c client */
- icd->control = &client->dev;
-
- return 0;
-ei2cnd:
- v4l2_clk_unregister(icd->clk);
- icd->clk = NULL;
-eclkreg:
- kfree(ssdd);
-ealloc:
- i2c_put_adapter(adap);
- return ret;
-}
-
-static void soc_camera_i2c_free(struct soc_camera_device *icd)
-{
- struct i2c_client *client =
- to_i2c_client(to_soc_camera_control(icd));
- struct i2c_adapter *adap;
- struct soc_camera_subdev_desc *ssdd;
-
- icd->control = NULL;
- if (icd->sasc)
- return;
-
- adap = client->adapter;
- ssdd = client->dev.platform_data;
- v4l2_device_unregister_subdev(i2c_get_clientdata(client));
- i2c_unregister_device(client);
- i2c_put_adapter(adap);
- kfree(ssdd);
- v4l2_clk_unregister(icd->clk);
- icd->clk = NULL;
-}
-
-/*
- * V4L2 asynchronous notifier callbacks. They are all called under a v4l2-async
- * internal global mutex, therefore cannot race against other asynchronous
- * events. Until notifier->complete() (soc_camera_async_complete()) is called,
- * the video device node is not registered and no V4L fops can occur. Unloading
- * of the host driver also calls a v4l2-async function, so also there we're
- * protected.
- */
-static int soc_camera_async_bound(struct v4l2_async_notifier *notifier,
- struct v4l2_subdev *sd,
- struct v4l2_async_subdev *asd)
-{
- struct soc_camera_async_client *sasc = container_of(notifier,
- struct soc_camera_async_client, notifier);
- struct soc_camera_device *icd = platform_get_drvdata(sasc->pdev);
-
- if (asd == sasc->sensor && !WARN_ON(icd->control)) {
- struct i2c_client *client = v4l2_get_subdevdata(sd);
-
- /*
- * Only now we get subdevice-specific information like
- * regulators, flags, callbacks, etc.
- */
- if (client) {
- struct soc_camera_desc *sdesc = to_soc_camera_desc(icd);
- struct soc_camera_subdev_desc *ssdd =
- soc_camera_i2c_to_desc(client);
- if (ssdd) {
- memcpy(&sdesc->subdev_desc, ssdd,
- sizeof(sdesc->subdev_desc));
- if (ssdd->reset)
- ssdd->reset(&client->dev);
- }
-
- icd->control = &client->dev;
- }
- }
-
- return 0;
-}
-
-static void soc_camera_async_unbind(struct v4l2_async_notifier *notifier,
- struct v4l2_subdev *sd,
- struct v4l2_async_subdev *asd)
-{
- struct soc_camera_async_client *sasc = container_of(notifier,
- struct soc_camera_async_client, notifier);
- struct soc_camera_device *icd = platform_get_drvdata(sasc->pdev);
-
- icd->control = NULL;
-
- if (icd->clk) {
- v4l2_clk_unregister(icd->clk);
- icd->clk = NULL;
- }
-}
-
-static int soc_camera_async_complete(struct v4l2_async_notifier *notifier)
-{
- struct soc_camera_async_client *sasc = container_of(notifier,
- struct soc_camera_async_client, notifier);
- struct soc_camera_device *icd = platform_get_drvdata(sasc->pdev);
-
- if (to_soc_camera_control(icd)) {
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- int ret;
-
- mutex_lock(&list_lock);
- ret = soc_camera_probe(ici, icd);
- mutex_unlock(&list_lock);
- if (ret < 0)
- return ret;
- }
-
- return 0;
-}
-
-static const struct v4l2_async_notifier_operations soc_camera_async_ops = {
- .bound = soc_camera_async_bound,
- .unbind = soc_camera_async_unbind,
- .complete = soc_camera_async_complete,
-};
-
-static int scan_async_group(struct soc_camera_host *ici,
- struct v4l2_async_subdev **asd, unsigned int size)
-{
- struct soc_camera_async_subdev *sasd;
- struct soc_camera_async_client *sasc;
- struct soc_camera_device *icd;
- struct soc_camera_desc sdesc = {.host_desc.bus_id = ici->nr,};
- char clk_name[V4L2_CLK_NAME_SIZE];
- unsigned int i;
- int ret;
-
- /* First look for a sensor */
- for (i = 0; i < size; i++) {
- sasd = container_of(asd[i], struct soc_camera_async_subdev, asd);
- if (sasd->role == SOCAM_SUBDEV_DATA_SOURCE)
- break;
- }
-
- if (i >= size || asd[i]->match_type != V4L2_ASYNC_MATCH_I2C) {
- /* All useless */
- dev_err(ici->v4l2_dev.dev, "No I2C data source found!\n");
- return -ENODEV;
- }
-
- /* Or shall this be managed by the soc-camera device? */
- sasc = devm_kzalloc(ici->v4l2_dev.dev, sizeof(*sasc), GFP_KERNEL);
- if (!sasc)
- return -ENOMEM;
-
- /* HACK: just need a != NULL */
- sdesc.host_desc.board_info = ERR_PTR(-ENODATA);
-
- ret = soc_camera_dyn_pdev(&sdesc, sasc);
- if (ret < 0)
- goto eallocpdev;
-
- sasc->sensor = &sasd->asd;
-
- icd = soc_camera_add_pdev(sasc);
- if (!icd) {
- ret = -ENOMEM;
- goto eaddpdev;
- }
-
- v4l2_async_notifier_init(&sasc->notifier);
-
- for (i = 0; i < size; i++) {
- ret = v4l2_async_notifier_add_subdev(&sasc->notifier, asd[i]);
- if (ret)
- goto eaddasd;
- }
-
- sasc->notifier.ops = &soc_camera_async_ops;
-
- icd->sasc = sasc;
- icd->parent = ici->v4l2_dev.dev;
-
- v4l2_clk_name_i2c(clk_name, sizeof(clk_name),
- sasd->asd.match.i2c.adapter_id,
- sasd->asd.match.i2c.address);
-
- icd->clk = v4l2_clk_register(&soc_camera_clk_ops, clk_name, icd);
- if (IS_ERR(icd->clk)) {
- ret = PTR_ERR(icd->clk);
- goto eclkreg;
- }
-
- ret = v4l2_async_notifier_register(&ici->v4l2_dev, &sasc->notifier);
- if (!ret)
- return 0;
-
- v4l2_clk_unregister(icd->clk);
-eclkreg:
- icd->clk = NULL;
-eaddasd:
- v4l2_async_notifier_cleanup(&sasc->notifier);
- platform_device_del(sasc->pdev);
-eaddpdev:
- platform_device_put(sasc->pdev);
-eallocpdev:
- devm_kfree(ici->v4l2_dev.dev, sasc);
- dev_err(ici->v4l2_dev.dev, "group probe failed: %d\n", ret);
-
- return ret;
-}
-
-static void scan_async_host(struct soc_camera_host *ici)
-{
- struct v4l2_async_subdev **asd;
- int j;
-
- for (j = 0, asd = ici->asd; ici->asd_sizes[j]; j++) {
- scan_async_group(ici, asd, ici->asd_sizes[j]);
- asd += ici->asd_sizes[j];
- }
-}
-#else
-#define soc_camera_i2c_init(icd, sdesc) (-ENODEV)
-#define soc_camera_i2c_free(icd) do {} while (0)
-#define scan_async_host(ici) do {} while (0)
-#endif
-
-#ifdef CONFIG_OF
-
-struct soc_of_info {
- struct soc_camera_async_subdev sasd;
- struct soc_camera_async_client sasc;
- struct v4l2_async_subdev *subdev;
-};
-
-static int soc_of_bind(struct soc_camera_host *ici,
- struct device_node *ep,
- struct device_node *remote)
-{
- struct soc_camera_device *icd;
- struct soc_camera_desc sdesc = {.host_desc.bus_id = ici->nr,};
- struct soc_camera_async_client *sasc;
- struct soc_of_info *info;
- struct i2c_client *client;
- char clk_name[V4L2_CLK_NAME_SIZE];
- int ret;
-
- /* allocate a new subdev and add match info to it */
- info = devm_kzalloc(ici->v4l2_dev.dev, sizeof(struct soc_of_info),
- GFP_KERNEL);
- if (!info)
- return -ENOMEM;
-
- info->sasd.asd.match.fwnode = of_fwnode_handle(remote);
- info->sasd.asd.match_type = V4L2_ASYNC_MATCH_FWNODE;
- info->subdev = &info->sasd.asd;
-
- /* Or shall this be managed by the soc-camera device? */
- sasc = &info->sasc;
-
- /* HACK: just need a != NULL */
- sdesc.host_desc.board_info = ERR_PTR(-ENODATA);
-
- ret = soc_camera_dyn_pdev(&sdesc, sasc);
- if (ret < 0)
- goto eallocpdev;
-
- sasc->sensor = &info->sasd.asd;
-
- icd = soc_camera_add_pdev(sasc);
- if (!icd) {
- ret = -ENOMEM;
- goto eaddpdev;
- }
-
- v4l2_async_notifier_init(&sasc->notifier);
-
- ret = v4l2_async_notifier_add_subdev(&sasc->notifier, info->subdev);
- if (ret) {
- of_node_put(remote);
- goto eaddasd;
- }
-
- sasc->notifier.ops = &soc_camera_async_ops;
-
- icd->sasc = sasc;
- icd->parent = ici->v4l2_dev.dev;
-
- client = of_find_i2c_device_by_node(remote);
-
- if (client)
- v4l2_clk_name_i2c(clk_name, sizeof(clk_name),
- client->adapter->nr, client->addr);
- else
- v4l2_clk_name_of(clk_name, sizeof(clk_name), remote);
-
- icd->clk = v4l2_clk_register(&soc_camera_clk_ops, clk_name, icd);
- if (IS_ERR(icd->clk)) {
- ret = PTR_ERR(icd->clk);
- goto eclkreg;
- }
-
- ret = v4l2_async_notifier_register(&ici->v4l2_dev, &sasc->notifier);
- if (!ret)
- return 0;
-
- v4l2_clk_unregister(icd->clk);
-eclkreg:
- icd->clk = NULL;
-eaddasd:
- v4l2_async_notifier_cleanup(&sasc->notifier);
- platform_device_del(sasc->pdev);
-eaddpdev:
- platform_device_put(sasc->pdev);
-eallocpdev:
- devm_kfree(ici->v4l2_dev.dev, info);
- dev_err(ici->v4l2_dev.dev, "group probe failed: %d\n", ret);
-
- return ret;
-}
-
-static void scan_of_host(struct soc_camera_host *ici)
-{
- struct device *dev = ici->v4l2_dev.dev;
- struct device_node *np = dev->of_node;
- struct device_node *epn = NULL, *rem;
- unsigned int i;
-
- for (i = 0; ; i++) {
- epn = of_graph_get_next_endpoint(np, epn);
- if (!epn)
- break;
-
- rem = of_graph_get_remote_port_parent(epn);
- if (!rem) {
- dev_notice(dev, "no remote for %pOF\n", epn);
- continue;
- }
-
- /* so we now have a remote node to connect */
- if (!i)
- soc_of_bind(ici, epn, rem);
-
- if (i) {
- dev_err(dev, "multiple subdevices aren't supported yet!\n");
- break;
- }
- }
-
- of_node_put(epn);
-}
-
-#else
-static inline void scan_of_host(struct soc_camera_host *ici) { }
-#endif
-
-/* Called during host-driver probe */
-static int soc_camera_probe(struct soc_camera_host *ici,
- struct soc_camera_device *icd)
-{
- struct soc_camera_desc *sdesc = to_soc_camera_desc(icd);
- struct soc_camera_host_desc *shd = &sdesc->host_desc;
- struct device *control = NULL;
- int ret;
-
- dev_info(icd->pdev, "Probing %s\n", dev_name(icd->pdev));
-
- /*
- * Currently the subdev with the largest number of controls (13) is
- * ov6550. So let's pick 16 as a hint for the control handler. Note
- * that this is a hint only: too large and you waste some memory, too
- * small and there is a (very) small performance hit when looking up
- * controls in the internal hash.
- */
- ret = v4l2_ctrl_handler_init(&icd->ctrl_handler, 16);
- if (ret < 0)
- return ret;
-
- /* Must have icd->vdev before registering the device */
- ret = video_dev_create(icd);
- if (ret < 0)
- goto evdc;
-
- /*
- * ..._video_start() will create a device node, video_register_device()
- * itself is protected against concurrent open() calls, but we also have
- * to protect our data also during client probing.
- */
-
- /* Non-i2c cameras, e.g., soc_camera_platform, have no board_info */
- if (shd->board_info) {
- ret = soc_camera_i2c_init(icd, sdesc);
- if (ret < 0 && ret != -EPROBE_DEFER)
- goto eadd;
- } else if (!shd->add_device || !shd->del_device) {
- ret = -EINVAL;
- goto eadd;
- } else {
- ret = soc_camera_clock_start(ici);
- if (ret < 0)
- goto eadd;
-
- if (shd->module_name)
- ret = request_module(shd->module_name);
-
- ret = shd->add_device(icd);
- if (ret < 0)
- goto eadddev;
-
- /*
- * FIXME: this is racy, have to use driver-binding notification,
- * when it is available
- */
- control = to_soc_camera_control(icd);
- if (!control || !control->driver || !dev_get_drvdata(control) ||
- !try_module_get(control->driver->owner)) {
- shd->del_device(icd);
- ret = -ENODEV;
- goto enodrv;
- }
- }
-
- mutex_lock(&ici->host_lock);
- ret = soc_camera_probe_finish(icd);
- mutex_unlock(&ici->host_lock);
- if (ret < 0)
- goto efinish;
-
- return 0;
-
-efinish:
- if (shd->board_info) {
- soc_camera_i2c_free(icd);
- } else {
- shd->del_device(icd);
- module_put(control->driver->owner);
-enodrv:
-eadddev:
- soc_camera_clock_stop(ici);
- }
-eadd:
- if (icd->vdev) {
- video_device_release(icd->vdev);
- icd->vdev = NULL;
- }
-evdc:
- v4l2_ctrl_handler_free(&icd->ctrl_handler);
- return ret;
-}
-
-/*
- * This is called on device_unregister, which only means we have to disconnect
- * from the host, but not remove ourselves from the device list. With
- * asynchronous client probing this can also be called without
- * soc_camera_probe_finish() having run. Careful with clean up.
- */
-static int soc_camera_remove(struct soc_camera_device *icd)
-{
- struct soc_camera_desc *sdesc = to_soc_camera_desc(icd);
- struct video_device *vdev = icd->vdev;
-
- v4l2_ctrl_handler_free(&icd->ctrl_handler);
- if (vdev) {
- video_unregister_device(vdev);
- icd->vdev = NULL;
- }
-
- if (sdesc->host_desc.board_info) {
- soc_camera_i2c_free(icd);
- } else {
- struct device *dev = to_soc_camera_control(icd);
- struct device_driver *drv = dev ? dev->driver : NULL;
- if (drv) {
- sdesc->host_desc.del_device(icd);
- module_put(drv->owner);
- }
- }
-
- if (icd->num_user_formats)
- soc_camera_free_user_formats(icd);
-
- if (icd->clk) {
- /* For the synchronous case */
- v4l2_clk_unregister(icd->clk);
- icd->clk = NULL;
- }
-
- if (icd->sasc)
- platform_device_unregister(icd->sasc->pdev);
-
- return 0;
-}
-
-static int default_g_selection(struct soc_camera_device *icd,
- struct v4l2_selection *sel)
-{
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- struct v4l2_subdev_selection sdsel = {
- .which = V4L2_SUBDEV_FORMAT_ACTIVE,
- .target = sel->target,
- };
- int ret;
-
- ret = v4l2_subdev_call(sd, pad, get_selection, NULL, &sdsel);
- if (ret)
- return ret;
- sel->r = sdsel.r;
- return 0;
-}
-
-static int default_s_selection(struct soc_camera_device *icd,
- struct v4l2_selection *sel)
-{
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- struct v4l2_subdev_selection sdsel = {
- .which = V4L2_SUBDEV_FORMAT_ACTIVE,
- .target = sel->target,
- .flags = sel->flags,
- .r = sel->r,
- };
- int ret;
-
- ret = v4l2_subdev_call(sd, pad, set_selection, NULL, &sdsel);
- if (ret)
- return ret;
- sel->r = sdsel.r;
- return 0;
-}
-
-static int default_g_parm(struct soc_camera_device *icd,
- struct v4l2_streamparm *a)
-{
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-
- return v4l2_g_parm_cap(icd->vdev, sd, a);
-}
-
-static int default_s_parm(struct soc_camera_device *icd,
- struct v4l2_streamparm *a)
-{
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-
- return v4l2_s_parm_cap(icd->vdev, sd, a);
-}
-
-static int default_enum_framesizes(struct soc_camera_device *icd,
- struct v4l2_frmsizeenum *fsize)
-{
- int ret;
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- const struct soc_camera_format_xlate *xlate;
- struct v4l2_subdev_frame_size_enum fse = {
- .index = fsize->index,
- .which = V4L2_SUBDEV_FORMAT_ACTIVE,
- };
-
- xlate = soc_camera_xlate_by_fourcc(icd, fsize->pixel_format);
- if (!xlate)
- return -EINVAL;
- fse.code = xlate->code;
-
- ret = v4l2_subdev_call(sd, pad, enum_frame_size, NULL, &fse);
- if (ret < 0)
- return ret;
-
- if (fse.min_width == fse.max_width &&
- fse.min_height == fse.max_height) {
- fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
- fsize->discrete.width = fse.min_width;
- fsize->discrete.height = fse.min_height;
- return 0;
- }
- fsize->type = V4L2_FRMSIZE_TYPE_CONTINUOUS;
- fsize->stepwise.min_width = fse.min_width;
- fsize->stepwise.max_width = fse.max_width;
- fsize->stepwise.min_height = fse.min_height;
- fsize->stepwise.max_height = fse.max_height;
- fsize->stepwise.step_width = 1;
- fsize->stepwise.step_height = 1;
- return 0;
-}
-
-int soc_camera_host_register(struct soc_camera_host *ici)
-{
- struct soc_camera_host *ix;
- int ret;
-
- if (!ici || !ici->ops ||
- !ici->ops->try_fmt ||
- !ici->ops->set_fmt ||
- !ici->ops->set_bus_param ||
- !ici->ops->querycap ||
- !ici->ops->init_videobuf2 ||
- !ici->ops->poll ||
- !ici->v4l2_dev.dev)
- return -EINVAL;
-
- if (!ici->ops->set_selection)
- ici->ops->set_selection = default_s_selection;
- if (!ici->ops->get_selection)
- ici->ops->get_selection = default_g_selection;
- if (!ici->ops->set_parm)
- ici->ops->set_parm = default_s_parm;
- if (!ici->ops->get_parm)
- ici->ops->get_parm = default_g_parm;
- if (!ici->ops->enum_framesizes)
- ici->ops->enum_framesizes = default_enum_framesizes;
-
- mutex_lock(&list_lock);
- list_for_each_entry(ix, &hosts, list) {
- if (ix->nr == ici->nr) {
- ret = -EBUSY;
- goto edevreg;
- }
- }
-
- ret = v4l2_device_register(ici->v4l2_dev.dev, &ici->v4l2_dev);
- if (ret < 0)
- goto edevreg;
-
- list_add_tail(&ici->list, &hosts);
- mutex_unlock(&list_lock);
-
- mutex_init(&ici->host_lock);
- mutex_init(&ici->clk_lock);
-
- if (ici->v4l2_dev.dev->of_node)
- scan_of_host(ici);
- else if (ici->asd_sizes)
- /*
- * No OF, host with a list of subdevices. Don't try to mix
- * modes by initialising some groups statically and some
- * dynamically!
- */
- scan_async_host(ici);
- else
- /* Legacy: static platform devices from board data */
- scan_add_host(ici);
-
- return 0;
-
-edevreg:
- mutex_unlock(&list_lock);
- return ret;
-}
-EXPORT_SYMBOL(soc_camera_host_register);
-
-/* Unregister all clients! */
-void soc_camera_host_unregister(struct soc_camera_host *ici)
-{
- struct soc_camera_device *icd, *tmp;
- struct soc_camera_async_client *sasc;
- LIST_HEAD(notifiers);
-
- mutex_lock(&list_lock);
- list_del(&ici->list);
- list_for_each_entry(icd, &devices, list)
- if (icd->iface == ici->nr && icd->sasc) {
- /* as long as we hold the device, sasc won't be freed */
- get_device(icd->pdev);
- list_add(&icd->sasc->list, ¬ifiers);
- }
- mutex_unlock(&list_lock);
-
- list_for_each_entry(sasc, ¬ifiers, list) {
- /* Must call unlocked to avoid AB-BA dead-lock */
- v4l2_async_notifier_unregister(&sasc->notifier);
- v4l2_async_notifier_cleanup(&sasc->notifier);
- put_device(&sasc->pdev->dev);
- }
-
- mutex_lock(&list_lock);
-
- list_for_each_entry_safe(icd, tmp, &devices, list)
- if (icd->iface == ici->nr)
- soc_camera_remove(icd);
-
- mutex_unlock(&list_lock);
-
- v4l2_device_unregister(&ici->v4l2_dev);
-}
-EXPORT_SYMBOL(soc_camera_host_unregister);
-
-/* Image capture device */
-static int soc_camera_device_register(struct soc_camera_device *icd)
-{
- struct soc_camera_device *ix;
- int num = -1, i;
-
- mutex_lock(&list_lock);
- for (i = 0; i < 256 && num < 0; i++) {
- num = i;
- /* Check if this index is available on this interface */
- list_for_each_entry(ix, &devices, list) {
- if (ix->iface == icd->iface && ix->devnum == i) {
- num = -1;
- break;
- }
- }
- }
-
- if (num < 0) {
- /*
- * ok, we have 256 cameras on this host...
- * man, stay reasonable...
- */
- mutex_unlock(&list_lock);
- return -ENOMEM;
- }
-
- icd->devnum = num;
- icd->use_count = 0;
- icd->host_priv = NULL;
-
- /*
- * Dynamically allocated devices set the bit earlier, but it doesn't hurt setting
- * it again
- */
- i = to_platform_device(icd->pdev)->id;
- if (i < 0)
- /* One static (legacy) soc-camera platform device */
- i = 0;
- if (i >= MAP_MAX_NUM) {
- mutex_unlock(&list_lock);
- return -EBUSY;
- }
- set_bit(i, device_map);
- list_add_tail(&icd->list, &devices);
- mutex_unlock(&list_lock);
-
- return 0;
-}
-
-static const struct v4l2_ioctl_ops soc_camera_ioctl_ops = {
- .vidioc_querycap = soc_camera_querycap,
- .vidioc_try_fmt_vid_cap = soc_camera_try_fmt_vid_cap,
- .vidioc_g_fmt_vid_cap = soc_camera_g_fmt_vid_cap,
- .vidioc_s_fmt_vid_cap = soc_camera_s_fmt_vid_cap,
- .vidioc_enum_fmt_vid_cap = soc_camera_enum_fmt_vid_cap,
- .vidioc_enum_input = soc_camera_enum_input,
- .vidioc_g_input = soc_camera_g_input,
- .vidioc_s_input = soc_camera_s_input,
- .vidioc_s_std = soc_camera_s_std,
- .vidioc_g_std = soc_camera_g_std,
- .vidioc_enum_framesizes = soc_camera_enum_framesizes,
- .vidioc_reqbufs = soc_camera_reqbufs,
- .vidioc_querybuf = soc_camera_querybuf,
- .vidioc_qbuf = soc_camera_qbuf,
- .vidioc_dqbuf = soc_camera_dqbuf,
- .vidioc_create_bufs = soc_camera_create_bufs,
- .vidioc_prepare_buf = soc_camera_prepare_buf,
- .vidioc_expbuf = soc_camera_expbuf,
- .vidioc_streamon = soc_camera_streamon,
- .vidioc_streamoff = soc_camera_streamoff,
- .vidioc_g_selection = soc_camera_g_selection,
- .vidioc_s_selection = soc_camera_s_selection,
- .vidioc_g_parm = soc_camera_g_parm,
- .vidioc_s_parm = soc_camera_s_parm,
-};
-
-static int video_dev_create(struct soc_camera_device *icd)
-{
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- struct video_device *vdev = video_device_alloc();
-
- if (!vdev)
- return -ENOMEM;
-
- strscpy(vdev->name, ici->drv_name, sizeof(vdev->name));
-
- vdev->v4l2_dev = &ici->v4l2_dev;
- vdev->fops = &soc_camera_fops;
- vdev->ioctl_ops = &soc_camera_ioctl_ops;
- vdev->release = video_device_release;
- vdev->ctrl_handler = &icd->ctrl_handler;
- vdev->lock = &ici->host_lock;
-
- icd->vdev = vdev;
-
- return 0;
-}
-
-/*
- * Called from soc_camera_probe() above with .host_lock held
- */
-static int soc_camera_video_start(struct soc_camera_device *icd)
-{
- const struct device_type *type = icd->vdev->dev.type;
- int ret;
-
- if (!icd->parent)
- return -ENODEV;
-
- video_set_drvdata(icd->vdev, icd);
- if (icd->vdev->tvnorms == 0) {
- /* disable the STD API if there are no tvnorms defined */
- v4l2_disable_ioctl(icd->vdev, VIDIOC_G_STD);
- v4l2_disable_ioctl(icd->vdev, VIDIOC_S_STD);
- v4l2_disable_ioctl(icd->vdev, VIDIOC_ENUMSTD);
- }
- ret = video_register_device(icd->vdev, VFL_TYPE_VIDEO, -1);
- if (ret < 0) {
- dev_err(icd->pdev, "video_register_device failed: %d\n", ret);
- return ret;
- }
-
- /* Restore device type, possibly set by the subdevice driver */
- icd->vdev->dev.type = type;
-
- return 0;
-}
-
-static int soc_camera_pdrv_probe(struct platform_device *pdev)
-{
- struct soc_camera_desc *sdesc = pdev->dev.platform_data;
- struct soc_camera_subdev_desc *ssdd = &sdesc->subdev_desc;
- struct soc_camera_device *icd;
- int ret;
-
- if (!sdesc)
- return -EINVAL;
-
- icd = devm_kzalloc(&pdev->dev, sizeof(*icd), GFP_KERNEL);
- if (!icd)
- return -ENOMEM;
-
- /*
- * In the asynchronous case ssdd->num_regulators == 0 yet, so, the below
- * regulator allocation is a dummy. They are actually requested by the
- * subdevice driver, using soc_camera_power_init(). Also note, that in
- * that case regulators are attached to the I2C device and not to the
- * camera platform device.
- */
- ret = devm_regulator_bulk_get(&pdev->dev, ssdd->sd_pdata.num_regulators,
- ssdd->sd_pdata.regulators);
- if (ret < 0)
- return ret;
-
- icd->iface = sdesc->host_desc.bus_id;
- icd->sdesc = sdesc;
- icd->pdev = &pdev->dev;
- platform_set_drvdata(pdev, icd);
-
- icd->user_width = DEFAULT_WIDTH;
- icd->user_height = DEFAULT_HEIGHT;
-
- return soc_camera_device_register(icd);
-}
-
-/*
- * Only called on rmmod for each platform device, since they are not
- * hot-pluggable. Now we know, that all our users - hosts and devices have
- * been unloaded already
- */
-static int soc_camera_pdrv_remove(struct platform_device *pdev)
-{
- struct soc_camera_device *icd = platform_get_drvdata(pdev);
- int i;
-
- if (!icd)
- return -EINVAL;
-
- i = pdev->id;
- if (i < 0)
- i = 0;
-
- /*
- * In synchronous mode with static platform devices this is called in a
- * loop from drivers/base/dd.c::driver_detach(), no parallel execution,
- * no need to lock. In asynchronous case the caller -
- * soc_camera_host_unregister() - already holds the lock
- */
- if (test_bit(i, device_map)) {
- clear_bit(i, device_map);
- list_del(&icd->list);
- }
-
- return 0;
-}
-
-static struct platform_driver __refdata soc_camera_pdrv = {
- .probe = soc_camera_pdrv_probe,
- .remove = soc_camera_pdrv_remove,
- .driver = {
- .name = "soc-camera-pdrv",
- },
-};
-
-module_platform_driver(soc_camera_pdrv);
-
-MODULE_DESCRIPTION("Image capture bus driver");
-MODULE_AUTHOR("Guennadi Liakhovetski <kernel@pengutronix.de>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:soc-camera-pdrv");
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * soc-camera media bus helper routines
- *
- * Copyright (C) 2009, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <media/v4l2-device.h>
-#include <media/v4l2-mediabus.h>
-#include <media/drv-intf/soc_mediabus.h>
-
-static const struct soc_mbus_lookup mbus_fmt[] = {
-{
- .code = MEDIA_BUS_FMT_YUYV8_2X8,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_YUYV,
- .name = "YUYV",
- .bits_per_sample = 8,
- .packing = SOC_MBUS_PACKING_2X8_PADHI,
- .order = SOC_MBUS_ORDER_LE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_YVYU8_2X8,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_YVYU,
- .name = "YVYU",
- .bits_per_sample = 8,
- .packing = SOC_MBUS_PACKING_2X8_PADHI,
- .order = SOC_MBUS_ORDER_LE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_UYVY8_2X8,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_UYVY,
- .name = "UYVY",
- .bits_per_sample = 8,
- .packing = SOC_MBUS_PACKING_2X8_PADHI,
- .order = SOC_MBUS_ORDER_LE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_VYUY8_2X8,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_VYUY,
- .name = "VYUY",
- .bits_per_sample = 8,
- .packing = SOC_MBUS_PACKING_2X8_PADHI,
- .order = SOC_MBUS_ORDER_LE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_RGB555,
- .name = "RGB555",
- .bits_per_sample = 8,
- .packing = SOC_MBUS_PACKING_2X8_PADHI,
- .order = SOC_MBUS_ORDER_LE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_RGB555X,
- .name = "RGB555X",
- .bits_per_sample = 8,
- .packing = SOC_MBUS_PACKING_2X8_PADHI,
- .order = SOC_MBUS_ORDER_BE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_RGB565_2X8_LE,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_RGB565,
- .name = "RGB565",
- .bits_per_sample = 8,
- .packing = SOC_MBUS_PACKING_2X8_PADHI,
- .order = SOC_MBUS_ORDER_LE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_RGB565_2X8_BE,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_RGB565X,
- .name = "RGB565X",
- .bits_per_sample = 8,
- .packing = SOC_MBUS_PACKING_2X8_PADHI,
- .order = SOC_MBUS_ORDER_BE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_RGB666_1X18,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_RGB32,
- .name = "RGB666/32bpp",
- .bits_per_sample = 18,
- .packing = SOC_MBUS_PACKING_EXTEND32,
- .order = SOC_MBUS_ORDER_LE,
- },
-}, {
- .code = MEDIA_BUS_FMT_RGB888_1X24,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_RGB32,
- .name = "RGB888/32bpp",
- .bits_per_sample = 24,
- .packing = SOC_MBUS_PACKING_EXTEND32,
- .order = SOC_MBUS_ORDER_LE,
- },
-}, {
- .code = MEDIA_BUS_FMT_RGB888_2X12_BE,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_RGB32,
- .name = "RGB888/32bpp",
- .bits_per_sample = 12,
- .packing = SOC_MBUS_PACKING_EXTEND32,
- .order = SOC_MBUS_ORDER_BE,
- },
-}, {
- .code = MEDIA_BUS_FMT_RGB888_2X12_LE,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_RGB32,
- .name = "RGB888/32bpp",
- .bits_per_sample = 12,
- .packing = SOC_MBUS_PACKING_EXTEND32,
- .order = SOC_MBUS_ORDER_LE,
- },
-}, {
- .code = MEDIA_BUS_FMT_SBGGR8_1X8,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_SBGGR8,
- .name = "Bayer 8 BGGR",
- .bits_per_sample = 8,
- .packing = SOC_MBUS_PACKING_NONE,
- .order = SOC_MBUS_ORDER_LE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_SBGGR10_1X10,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_SBGGR10,
- .name = "Bayer 10 BGGR",
- .bits_per_sample = 10,
- .packing = SOC_MBUS_PACKING_EXTEND16,
- .order = SOC_MBUS_ORDER_LE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_Y8_1X8,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_GREY,
- .name = "Grey",
- .bits_per_sample = 8,
- .packing = SOC_MBUS_PACKING_NONE,
- .order = SOC_MBUS_ORDER_LE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_Y10_1X10,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_Y10,
- .name = "Grey 10bit",
- .bits_per_sample = 10,
- .packing = SOC_MBUS_PACKING_EXTEND16,
- .order = SOC_MBUS_ORDER_LE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_SBGGR10,
- .name = "Bayer 10 BGGR",
- .bits_per_sample = 8,
- .packing = SOC_MBUS_PACKING_2X8_PADHI,
- .order = SOC_MBUS_ORDER_LE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_SBGGR10_2X8_PADLO_LE,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_SBGGR10,
- .name = "Bayer 10 BGGR",
- .bits_per_sample = 8,
- .packing = SOC_MBUS_PACKING_2X8_PADLO,
- .order = SOC_MBUS_ORDER_LE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_BE,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_SBGGR10,
- .name = "Bayer 10 BGGR",
- .bits_per_sample = 8,
- .packing = SOC_MBUS_PACKING_2X8_PADHI,
- .order = SOC_MBUS_ORDER_BE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_SBGGR10_2X8_PADLO_BE,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_SBGGR10,
- .name = "Bayer 10 BGGR",
- .bits_per_sample = 8,
- .packing = SOC_MBUS_PACKING_2X8_PADLO,
- .order = SOC_MBUS_ORDER_BE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_JPEG_1X8,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_JPEG,
- .name = "JPEG",
- .bits_per_sample = 8,
- .packing = SOC_MBUS_PACKING_VARIABLE,
- .order = SOC_MBUS_ORDER_LE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_RGB444_2X8_PADHI_BE,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_RGB444,
- .name = "RGB444",
- .bits_per_sample = 8,
- .packing = SOC_MBUS_PACKING_2X8_PADHI,
- .order = SOC_MBUS_ORDER_BE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_YUYV8_1_5X8,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_YUV420,
- .name = "YUYV 4:2:0",
- .bits_per_sample = 8,
- .packing = SOC_MBUS_PACKING_1_5X8,
- .order = SOC_MBUS_ORDER_LE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_YVYU8_1_5X8,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_YVU420,
- .name = "YVYU 4:2:0",
- .bits_per_sample = 8,
- .packing = SOC_MBUS_PACKING_1_5X8,
- .order = SOC_MBUS_ORDER_LE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_UYVY8_1X16,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_UYVY,
- .name = "UYVY 16bit",
- .bits_per_sample = 16,
- .packing = SOC_MBUS_PACKING_EXTEND16,
- .order = SOC_MBUS_ORDER_LE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_VYUY8_1X16,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_VYUY,
- .name = "VYUY 16bit",
- .bits_per_sample = 16,
- .packing = SOC_MBUS_PACKING_EXTEND16,
- .order = SOC_MBUS_ORDER_LE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_YUYV8_1X16,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_YUYV,
- .name = "YUYV 16bit",
- .bits_per_sample = 16,
- .packing = SOC_MBUS_PACKING_EXTEND16,
- .order = SOC_MBUS_ORDER_LE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_YVYU8_1X16,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_YVYU,
- .name = "YVYU 16bit",
- .bits_per_sample = 16,
- .packing = SOC_MBUS_PACKING_EXTEND16,
- .order = SOC_MBUS_ORDER_LE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_SGRBG8_1X8,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_SGRBG8,
- .name = "Bayer 8 GRBG",
- .bits_per_sample = 8,
- .packing = SOC_MBUS_PACKING_NONE,
- .order = SOC_MBUS_ORDER_LE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_SGRBG10DPCM8,
- .name = "Bayer 10 BGGR DPCM 8",
- .bits_per_sample = 8,
- .packing = SOC_MBUS_PACKING_NONE,
- .order = SOC_MBUS_ORDER_LE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_SGBRG10_1X10,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_SGBRG10,
- .name = "Bayer 10 GBRG",
- .bits_per_sample = 10,
- .packing = SOC_MBUS_PACKING_EXTEND16,
- .order = SOC_MBUS_ORDER_LE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_SGRBG10_1X10,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_SGRBG10,
- .name = "Bayer 10 GRBG",
- .bits_per_sample = 10,
- .packing = SOC_MBUS_PACKING_EXTEND16,
- .order = SOC_MBUS_ORDER_LE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_SRGGB10_1X10,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_SRGGB10,
- .name = "Bayer 10 RGGB",
- .bits_per_sample = 10,
- .packing = SOC_MBUS_PACKING_EXTEND16,
- .order = SOC_MBUS_ORDER_LE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_SBGGR12_1X12,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_SBGGR12,
- .name = "Bayer 12 BGGR",
- .bits_per_sample = 12,
- .packing = SOC_MBUS_PACKING_EXTEND16,
- .order = SOC_MBUS_ORDER_LE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_SGBRG12_1X12,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_SGBRG12,
- .name = "Bayer 12 GBRG",
- .bits_per_sample = 12,
- .packing = SOC_MBUS_PACKING_EXTEND16,
- .order = SOC_MBUS_ORDER_LE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_SGRBG12_1X12,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_SGRBG12,
- .name = "Bayer 12 GRBG",
- .bits_per_sample = 12,
- .packing = SOC_MBUS_PACKING_EXTEND16,
- .order = SOC_MBUS_ORDER_LE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-}, {
- .code = MEDIA_BUS_FMT_SRGGB12_1X12,
- .fmt = {
- .fourcc = V4L2_PIX_FMT_SRGGB12,
- .name = "Bayer 12 RGGB",
- .bits_per_sample = 12,
- .packing = SOC_MBUS_PACKING_EXTEND16,
- .order = SOC_MBUS_ORDER_LE,
- .layout = SOC_MBUS_LAYOUT_PACKED,
- },
-},
-};
-
-int soc_mbus_samples_per_pixel(const struct soc_mbus_pixelfmt *mf,
- unsigned int *numerator, unsigned int *denominator)
-{
- switch (mf->packing) {
- case SOC_MBUS_PACKING_NONE:
- case SOC_MBUS_PACKING_EXTEND16:
- *numerator = 1;
- *denominator = 1;
- return 0;
- case SOC_MBUS_PACKING_EXTEND32:
- *numerator = 1;
- *denominator = 1;
- return 0;
- case SOC_MBUS_PACKING_2X8_PADHI:
- case SOC_MBUS_PACKING_2X8_PADLO:
- *numerator = 2;
- *denominator = 1;
- return 0;
- case SOC_MBUS_PACKING_1_5X8:
- *numerator = 3;
- *denominator = 2;
- return 0;
- case SOC_MBUS_PACKING_VARIABLE:
- *numerator = 0;
- *denominator = 1;
- return 0;
- }
- return -EINVAL;
-}
-EXPORT_SYMBOL(soc_mbus_samples_per_pixel);
-
-s32 soc_mbus_bytes_per_line(u32 width, const struct soc_mbus_pixelfmt *mf)
-{
- if (mf->layout != SOC_MBUS_LAYOUT_PACKED)
- return width * mf->bits_per_sample / 8;
-
- switch (mf->packing) {
- case SOC_MBUS_PACKING_NONE:
- return width * mf->bits_per_sample / 8;
- case SOC_MBUS_PACKING_2X8_PADHI:
- case SOC_MBUS_PACKING_2X8_PADLO:
- case SOC_MBUS_PACKING_EXTEND16:
- return width * 2;
- case SOC_MBUS_PACKING_1_5X8:
- return width * 3 / 2;
- case SOC_MBUS_PACKING_VARIABLE:
- return 0;
- case SOC_MBUS_PACKING_EXTEND32:
- return width * 4;
- }
- return -EINVAL;
-}
-EXPORT_SYMBOL(soc_mbus_bytes_per_line);
-
-s32 soc_mbus_image_size(const struct soc_mbus_pixelfmt *mf,
- u32 bytes_per_line, u32 height)
-{
- if (mf->layout == SOC_MBUS_LAYOUT_PACKED)
- return bytes_per_line * height;
-
- switch (mf->packing) {
- case SOC_MBUS_PACKING_2X8_PADHI:
- case SOC_MBUS_PACKING_2X8_PADLO:
- return bytes_per_line * height * 2;
- case SOC_MBUS_PACKING_1_5X8:
- return bytes_per_line * height * 3 / 2;
- default:
- return -EINVAL;
- }
-}
-EXPORT_SYMBOL(soc_mbus_image_size);
-
-const struct soc_mbus_pixelfmt *soc_mbus_find_fmtdesc(
- u32 code,
- const struct soc_mbus_lookup *lookup,
- int n)
-{
- int i;
-
- for (i = 0; i < n; i++)
- if (lookup[i].code == code)
- return &lookup[i].fmt;
-
- return NULL;
-}
-EXPORT_SYMBOL(soc_mbus_find_fmtdesc);
-
-const struct soc_mbus_pixelfmt *soc_mbus_get_fmtdesc(
- u32 code)
-{
- return soc_mbus_find_fmtdesc(code, mbus_fmt, ARRAY_SIZE(mbus_fmt));
-}
-EXPORT_SYMBOL(soc_mbus_get_fmtdesc);
-
-unsigned int soc_mbus_config_compatible(const struct v4l2_mbus_config *cfg,
- unsigned int flags)
-{
- unsigned long common_flags;
- bool hsync = true, vsync = true, pclk, data, mode;
- bool mipi_lanes, mipi_clock;
-
- common_flags = cfg->flags & flags;
-
- switch (cfg->type) {
- case V4L2_MBUS_PARALLEL:
- hsync = common_flags & (V4L2_MBUS_HSYNC_ACTIVE_HIGH |
- V4L2_MBUS_HSYNC_ACTIVE_LOW);
- vsync = common_flags & (V4L2_MBUS_VSYNC_ACTIVE_HIGH |
- V4L2_MBUS_VSYNC_ACTIVE_LOW);
- /* fall through */
- case V4L2_MBUS_BT656:
- pclk = common_flags & (V4L2_MBUS_PCLK_SAMPLE_RISING |
- V4L2_MBUS_PCLK_SAMPLE_FALLING);
- data = common_flags & (V4L2_MBUS_DATA_ACTIVE_HIGH |
- V4L2_MBUS_DATA_ACTIVE_LOW);
- mode = common_flags & (V4L2_MBUS_MASTER | V4L2_MBUS_SLAVE);
- return (!hsync || !vsync || !pclk || !data || !mode) ?
- 0 : common_flags;
- case V4L2_MBUS_CSI2_DPHY:
- mipi_lanes = common_flags & V4L2_MBUS_CSI2_LANES;
- mipi_clock = common_flags & (V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK |
- V4L2_MBUS_CSI2_CONTINUOUS_CLOCK);
- return (!mipi_lanes || !mipi_clock) ? 0 : common_flags;
- default:
- WARN_ON(1);
- return -EINVAL;
- }
- return 0;
-}
-EXPORT_SYMBOL(soc_mbus_config_compatible);
-
-static int __init soc_mbus_init(void)
-{
- return 0;
-}
-
-static void __exit soc_mbus_exit(void)
-{
-}
-
-module_init(soc_mbus_init);
-module_exit(soc_mbus_exit);
-
-MODULE_DESCRIPTION("soc-camera media bus interface");
-MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
-MODULE_LICENSE("GPL v2");
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Driver for MT9V022 CMOS Image Sensor from Micron
- *
- * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
- */
-#include <linux/videodev2.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/delay.h>
-#include <linux/log2.h>
-#include <linux/module.h>
-
-#include <media/i2c/mt9v022.h>
-#include <media/soc_camera.h>
-#include <media/drv-intf/soc_mediabus.h>
-#include <media/v4l2-subdev.h>
-#include <media/v4l2-clk.h>
-#include <media/v4l2-ctrls.h>
-
-/*
- * mt9v022 i2c address 0x48, 0x4c, 0x58, 0x5c
- * The platform has to define struct i2c_board_info objects and link to them
- * from struct soc_camera_host_desc
- */
-
-static char *sensor_type;
-module_param(sensor_type, charp, S_IRUGO);
-MODULE_PARM_DESC(sensor_type, "Sensor type: \"colour\" or \"monochrome\"");
-
-/* mt9v022 selected register addresses */
-#define MT9V022_CHIP_VERSION 0x00
-#define MT9V022_COLUMN_START 0x01
-#define MT9V022_ROW_START 0x02
-#define MT9V022_WINDOW_HEIGHT 0x03
-#define MT9V022_WINDOW_WIDTH 0x04
-#define MT9V022_HORIZONTAL_BLANKING 0x05
-#define MT9V022_VERTICAL_BLANKING 0x06
-#define MT9V022_CHIP_CONTROL 0x07
-#define MT9V022_SHUTTER_WIDTH1 0x08
-#define MT9V022_SHUTTER_WIDTH2 0x09
-#define MT9V022_SHUTTER_WIDTH_CTRL 0x0a
-#define MT9V022_TOTAL_SHUTTER_WIDTH 0x0b
-#define MT9V022_RESET 0x0c
-#define MT9V022_READ_MODE 0x0d
-#define MT9V022_MONITOR_MODE 0x0e
-#define MT9V022_PIXEL_OPERATION_MODE 0x0f
-#define MT9V022_LED_OUT_CONTROL 0x1b
-#define MT9V022_ADC_MODE_CONTROL 0x1c
-#define MT9V022_REG32 0x20
-#define MT9V022_ANALOG_GAIN 0x35
-#define MT9V022_BLACK_LEVEL_CALIB_CTRL 0x47
-#define MT9V022_PIXCLK_FV_LV 0x74
-#define MT9V022_DIGITAL_TEST_PATTERN 0x7f
-#define MT9V022_AEC_AGC_ENABLE 0xAF
-#define MT9V022_MAX_TOTAL_SHUTTER_WIDTH 0xBD
-
-/* mt9v024 partial list register addresses changes with respect to mt9v022 */
-#define MT9V024_PIXCLK_FV_LV 0x72
-#define MT9V024_MAX_TOTAL_SHUTTER_WIDTH 0xAD
-
-/* Progressive scan, master, defaults */
-#define MT9V022_CHIP_CONTROL_DEFAULT 0x188
-
-#define MT9V022_MAX_WIDTH 752
-#define MT9V022_MAX_HEIGHT 480
-#define MT9V022_MIN_WIDTH 48
-#define MT9V022_MIN_HEIGHT 32
-#define MT9V022_COLUMN_SKIP 1
-#define MT9V022_ROW_SKIP 4
-
-#define MT9V022_HORIZONTAL_BLANKING_MIN 43
-#define MT9V022_HORIZONTAL_BLANKING_MAX 1023
-#define MT9V022_HORIZONTAL_BLANKING_DEF 94
-#define MT9V022_VERTICAL_BLANKING_MIN 2
-#define MT9V022_VERTICAL_BLANKING_MAX 3000
-#define MT9V022_VERTICAL_BLANKING_DEF 45
-
-#define is_mt9v022_rev3(id) (id == 0x1313)
-#define is_mt9v024(id) (id == 0x1324)
-
-/* MT9V022 has only one fixed colorspace per pixelcode */
-struct mt9v022_datafmt {
- u32 code;
- enum v4l2_colorspace colorspace;
-};
-
-/* Find a data format by a pixel code in an array */
-static const struct mt9v022_datafmt *mt9v022_find_datafmt(
- u32 code, const struct mt9v022_datafmt *fmt,
- int n)
-{
- int i;
- for (i = 0; i < n; i++)
- if (fmt[i].code == code)
- return fmt + i;
-
- return NULL;
-}
-
-static const struct mt9v022_datafmt mt9v022_colour_fmts[] = {
- /*
- * Order important: first natively supported,
- * second supported with a GPIO extender
- */
- {MEDIA_BUS_FMT_SBGGR10_1X10, V4L2_COLORSPACE_SRGB},
- {MEDIA_BUS_FMT_SBGGR8_1X8, V4L2_COLORSPACE_SRGB},
-};
-
-static const struct mt9v022_datafmt mt9v022_monochrome_fmts[] = {
- /* Order important - see above */
- {MEDIA_BUS_FMT_Y10_1X10, V4L2_COLORSPACE_JPEG},
- {MEDIA_BUS_FMT_Y8_1X8, V4L2_COLORSPACE_JPEG},
-};
-
-/* only registers with different addresses on different mt9v02x sensors */
-struct mt9v02x_register {
- u8 max_total_shutter_width;
- u8 pixclk_fv_lv;
-};
-
-static const struct mt9v02x_register mt9v022_register = {
- .max_total_shutter_width = MT9V022_MAX_TOTAL_SHUTTER_WIDTH,
- .pixclk_fv_lv = MT9V022_PIXCLK_FV_LV,
-};
-
-static const struct mt9v02x_register mt9v024_register = {
- .max_total_shutter_width = MT9V024_MAX_TOTAL_SHUTTER_WIDTH,
- .pixclk_fv_lv = MT9V024_PIXCLK_FV_LV,
-};
-
-enum mt9v022_model {
- MT9V022IX7ATM,
- MT9V022IX7ATC,
-};
-
-struct mt9v022 {
- struct v4l2_subdev subdev;
- struct v4l2_ctrl_handler hdl;
- struct {
- /* exposure/auto-exposure cluster */
- struct v4l2_ctrl *autoexposure;
- struct v4l2_ctrl *exposure;
- };
- struct {
- /* gain/auto-gain cluster */
- struct v4l2_ctrl *autogain;
- struct v4l2_ctrl *gain;
- };
- struct v4l2_ctrl *hblank;
- struct v4l2_ctrl *vblank;
- struct v4l2_rect rect; /* Sensor window */
- struct v4l2_clk *clk;
- const struct mt9v022_datafmt *fmt;
- const struct mt9v022_datafmt *fmts;
- const struct mt9v02x_register *reg;
- int num_fmts;
- enum mt9v022_model model;
- u16 chip_control;
- u16 chip_version;
- unsigned short y_skip_top; /* Lines to skip at the top */
-};
-
-static struct mt9v022 *to_mt9v022(const struct i2c_client *client)
-{
- return container_of(i2c_get_clientdata(client), struct mt9v022, subdev);
-}
-
-static int reg_read(struct i2c_client *client, const u8 reg)
-{
- return i2c_smbus_read_word_swapped(client, reg);
-}
-
-static int reg_write(struct i2c_client *client, const u8 reg,
- const u16 data)
-{
- return i2c_smbus_write_word_swapped(client, reg, data);
-}
-
-static int reg_set(struct i2c_client *client, const u8 reg,
- const u16 data)
-{
- int ret;
-
- ret = reg_read(client, reg);
- if (ret < 0)
- return ret;
- return reg_write(client, reg, ret | data);
-}
-
-static int reg_clear(struct i2c_client *client, const u8 reg,
- const u16 data)
-{
- int ret;
-
- ret = reg_read(client, reg);
- if (ret < 0)
- return ret;
- return reg_write(client, reg, ret & ~data);
-}
-
-static int mt9v022_init(struct i2c_client *client)
-{
- struct mt9v022 *mt9v022 = to_mt9v022(client);
- int ret;
-
- /*
- * Almost the default mode: master, parallel, simultaneous, and an
- * undocumented bit 0x200, which is present in table 7, but not in 8,
- * plus snapshot mode to disable scan for now
- */
- mt9v022->chip_control |= 0x10;
- ret = reg_write(client, MT9V022_CHIP_CONTROL, mt9v022->chip_control);
- if (!ret)
- ret = reg_write(client, MT9V022_READ_MODE, 0x300);
-
- /* All defaults */
- if (!ret)
- /* AEC, AGC on */
- ret = reg_set(client, MT9V022_AEC_AGC_ENABLE, 0x3);
- if (!ret)
- ret = reg_write(client, MT9V022_ANALOG_GAIN, 16);
- if (!ret)
- ret = reg_write(client, MT9V022_TOTAL_SHUTTER_WIDTH, 480);
- if (!ret)
- ret = reg_write(client, mt9v022->reg->max_total_shutter_width, 480);
- if (!ret)
- /* default - auto */
- ret = reg_clear(client, MT9V022_BLACK_LEVEL_CALIB_CTRL, 1);
- if (!ret)
- ret = reg_write(client, MT9V022_DIGITAL_TEST_PATTERN, 0);
- if (!ret)
- return v4l2_ctrl_handler_setup(&mt9v022->hdl);
-
- return ret;
-}
-
-static int mt9v022_s_stream(struct v4l2_subdev *sd, int enable)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct mt9v022 *mt9v022 = to_mt9v022(client);
-
- if (enable) {
- /* Switch to master "normal" mode */
- mt9v022->chip_control &= ~0x10;
- if (is_mt9v022_rev3(mt9v022->chip_version) ||
- is_mt9v024(mt9v022->chip_version)) {
- /*
- * Unset snapshot mode specific settings: clear bit 9
- * and bit 2 in reg. 0x20 when in normal mode.
- */
- if (reg_clear(client, MT9V022_REG32, 0x204))
- return -EIO;
- }
- } else {
- /* Switch to snapshot mode */
- mt9v022->chip_control |= 0x10;
- if (is_mt9v022_rev3(mt9v022->chip_version) ||
- is_mt9v024(mt9v022->chip_version)) {
- /*
- * Required settings for snapshot mode: set bit 9
- * (RST enable) and bit 2 (CR enable) in reg. 0x20
- * See TechNote TN0960 or TN-09-225.
- */
- if (reg_set(client, MT9V022_REG32, 0x204))
- return -EIO;
- }
- }
-
- if (reg_write(client, MT9V022_CHIP_CONTROL, mt9v022->chip_control) < 0)
- return -EIO;
- return 0;
-}
-
-static int mt9v022_set_selection(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_selection *sel)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct mt9v022 *mt9v022 = to_mt9v022(client);
- struct v4l2_rect rect = sel->r;
- int min_row, min_blank;
- int ret;
-
- if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE ||
- sel->target != V4L2_SEL_TGT_CROP)
- return -EINVAL;
-
- /* Bayer format - even size lengths */
- if (mt9v022->fmts == mt9v022_colour_fmts) {
- rect.width = ALIGN(rect.width, 2);
- rect.height = ALIGN(rect.height, 2);
- /* Let the user play with the starting pixel */
- }
-
- soc_camera_limit_side(&rect.left, &rect.width,
- MT9V022_COLUMN_SKIP, MT9V022_MIN_WIDTH, MT9V022_MAX_WIDTH);
-
- soc_camera_limit_side(&rect.top, &rect.height,
- MT9V022_ROW_SKIP, MT9V022_MIN_HEIGHT, MT9V022_MAX_HEIGHT);
-
- /* Like in example app. Contradicts the datasheet though */
- ret = reg_read(client, MT9V022_AEC_AGC_ENABLE);
- if (ret >= 0) {
- if (ret & 1) /* Autoexposure */
- ret = reg_write(client, mt9v022->reg->max_total_shutter_width,
- rect.height + mt9v022->y_skip_top + 43);
- /*
- * If autoexposure is off, there is no need to set
- * MT9V022_TOTAL_SHUTTER_WIDTH here. Autoexposure can be off
- * only if the user has set exposure manually, using the
- * V4L2_CID_EXPOSURE_AUTO with the value V4L2_EXPOSURE_MANUAL.
- * In this case the register MT9V022_TOTAL_SHUTTER_WIDTH
- * already contains the correct value.
- */
- }
- /* Setup frame format: defaults apart from width and height */
- if (!ret)
- ret = reg_write(client, MT9V022_COLUMN_START, rect.left);
- if (!ret)
- ret = reg_write(client, MT9V022_ROW_START, rect.top);
- /*
- * mt9v022: min total row time is 660 columns, min blanking is 43
- * mt9v024: min total row time is 690 columns, min blanking is 61
- */
- if (is_mt9v024(mt9v022->chip_version)) {
- min_row = 690;
- min_blank = 61;
- } else {
- min_row = 660;
- min_blank = 43;
- }
- if (!ret)
- ret = v4l2_ctrl_s_ctrl(mt9v022->hblank,
- rect.width > min_row - min_blank ?
- min_blank : min_row - rect.width);
- if (!ret)
- ret = v4l2_ctrl_s_ctrl(mt9v022->vblank, 45);
- if (!ret)
- ret = reg_write(client, MT9V022_WINDOW_WIDTH, rect.width);
- if (!ret)
- ret = reg_write(client, MT9V022_WINDOW_HEIGHT,
- rect.height + mt9v022->y_skip_top);
-
- if (ret < 0)
- return ret;
-
- dev_dbg(&client->dev, "Frame %dx%d pixel\n", rect.width, rect.height);
-
- mt9v022->rect = rect;
-
- return 0;
-}
-
-static int mt9v022_get_selection(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_selection *sel)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct mt9v022 *mt9v022 = to_mt9v022(client);
-
- if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
- return -EINVAL;
-
- switch (sel->target) {
- case V4L2_SEL_TGT_CROP_BOUNDS:
- sel->r.left = MT9V022_COLUMN_SKIP;
- sel->r.top = MT9V022_ROW_SKIP;
- sel->r.width = MT9V022_MAX_WIDTH;
- sel->r.height = MT9V022_MAX_HEIGHT;
- return 0;
- case V4L2_SEL_TGT_CROP:
- sel->r = mt9v022->rect;
- return 0;
- default:
- return -EINVAL;
- }
-}
-
-static int mt9v022_get_fmt(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_format *format)
-{
- struct v4l2_mbus_framefmt *mf = &format->format;
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct mt9v022 *mt9v022 = to_mt9v022(client);
-
- if (format->pad)
- return -EINVAL;
-
- mf->width = mt9v022->rect.width;
- mf->height = mt9v022->rect.height;
- mf->code = mt9v022->fmt->code;
- mf->colorspace = mt9v022->fmt->colorspace;
- mf->field = V4L2_FIELD_NONE;
-
- return 0;
-}
-
-static int mt9v022_s_fmt(struct v4l2_subdev *sd,
- const struct mt9v022_datafmt *fmt,
- struct v4l2_mbus_framefmt *mf)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct mt9v022 *mt9v022 = to_mt9v022(client);
- struct v4l2_subdev_selection sel = {
- .which = V4L2_SUBDEV_FORMAT_ACTIVE,
- .target = V4L2_SEL_TGT_CROP,
- .r.left = mt9v022->rect.left,
- .r.top = mt9v022->rect.top,
- .r.width = mf->width,
- .r.height = mf->height,
- };
- int ret;
-
- /*
- * The caller provides a supported format, as verified per call to
- * .set_fmt(FORMAT_TRY), datawidth is from our supported format list
- */
- switch (mf->code) {
- case MEDIA_BUS_FMT_Y8_1X8:
- case MEDIA_BUS_FMT_Y10_1X10:
- if (mt9v022->model != MT9V022IX7ATM)
- return -EINVAL;
- break;
- case MEDIA_BUS_FMT_SBGGR8_1X8:
- case MEDIA_BUS_FMT_SBGGR10_1X10:
- if (mt9v022->model != MT9V022IX7ATC)
- return -EINVAL;
- break;
- default:
- return -EINVAL;
- }
-
- /* No support for scaling on this camera, just crop. */
- ret = mt9v022_set_selection(sd, NULL, &sel);
- if (!ret) {
- mf->width = mt9v022->rect.width;
- mf->height = mt9v022->rect.height;
- mt9v022->fmt = fmt;
- mf->colorspace = fmt->colorspace;
- }
-
- return ret;
-}
-
-static int mt9v022_set_fmt(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_format *format)
-{
- struct v4l2_mbus_framefmt *mf = &format->format;
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct mt9v022 *mt9v022 = to_mt9v022(client);
- const struct mt9v022_datafmt *fmt;
- int align = mf->code == MEDIA_BUS_FMT_SBGGR8_1X8 ||
- mf->code == MEDIA_BUS_FMT_SBGGR10_1X10;
-
- if (format->pad)
- return -EINVAL;
-
- v4l_bound_align_image(&mf->width, MT9V022_MIN_WIDTH,
- MT9V022_MAX_WIDTH, align,
- &mf->height, MT9V022_MIN_HEIGHT + mt9v022->y_skip_top,
- MT9V022_MAX_HEIGHT + mt9v022->y_skip_top, align, 0);
-
- fmt = mt9v022_find_datafmt(mf->code, mt9v022->fmts,
- mt9v022->num_fmts);
- if (!fmt) {
- fmt = mt9v022->fmt;
- mf->code = fmt->code;
- }
-
- mf->colorspace = fmt->colorspace;
-
- if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
- return mt9v022_s_fmt(sd, fmt, mf);
- cfg->try_fmt = *mf;
- return 0;
-}
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int mt9v022_g_register(struct v4l2_subdev *sd,
- struct v4l2_dbg_register *reg)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
-
- if (reg->reg > 0xff)
- return -EINVAL;
-
- reg->size = 2;
- reg->val = reg_read(client, reg->reg);
-
- if (reg->val > 0xffff)
- return -EIO;
-
- return 0;
-}
-
-static int mt9v022_s_register(struct v4l2_subdev *sd,
- const struct v4l2_dbg_register *reg)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
-
- if (reg->reg > 0xff)
- return -EINVAL;
-
- if (reg_write(client, reg->reg, reg->val) < 0)
- return -EIO;
-
- return 0;
-}
-#endif
-
-static int mt9v022_s_power(struct v4l2_subdev *sd, int on)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
- struct mt9v022 *mt9v022 = to_mt9v022(client);
-
- return soc_camera_set_power(&client->dev, ssdd, mt9v022->clk, on);
-}
-
-static int mt9v022_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
-{
- struct mt9v022 *mt9v022 = container_of(ctrl->handler,
- struct mt9v022, hdl);
- struct v4l2_subdev *sd = &mt9v022->subdev;
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct v4l2_ctrl *gain = mt9v022->gain;
- struct v4l2_ctrl *exp = mt9v022->exposure;
- unsigned long range;
- int data;
-
- switch (ctrl->id) {
- case V4L2_CID_AUTOGAIN:
- data = reg_read(client, MT9V022_ANALOG_GAIN);
- if (data < 0)
- return -EIO;
-
- range = gain->maximum - gain->minimum;
- gain->val = ((data - 16) * range + 24) / 48 + gain->minimum;
- return 0;
- case V4L2_CID_EXPOSURE_AUTO:
- data = reg_read(client, MT9V022_TOTAL_SHUTTER_WIDTH);
- if (data < 0)
- return -EIO;
-
- range = exp->maximum - exp->minimum;
- exp->val = ((data - 1) * range + 239) / 479 + exp->minimum;
- return 0;
- case V4L2_CID_HBLANK:
- data = reg_read(client, MT9V022_HORIZONTAL_BLANKING);
- if (data < 0)
- return -EIO;
- ctrl->val = data;
- return 0;
- case V4L2_CID_VBLANK:
- data = reg_read(client, MT9V022_VERTICAL_BLANKING);
- if (data < 0)
- return -EIO;
- ctrl->val = data;
- return 0;
- }
- return -EINVAL;
-}
-
-static int mt9v022_s_ctrl(struct v4l2_ctrl *ctrl)
-{
- struct mt9v022 *mt9v022 = container_of(ctrl->handler,
- struct mt9v022, hdl);
- struct v4l2_subdev *sd = &mt9v022->subdev;
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- int data;
-
- switch (ctrl->id) {
- case V4L2_CID_VFLIP:
- if (ctrl->val)
- data = reg_set(client, MT9V022_READ_MODE, 0x10);
- else
- data = reg_clear(client, MT9V022_READ_MODE, 0x10);
- if (data < 0)
- return -EIO;
- return 0;
- case V4L2_CID_HFLIP:
- if (ctrl->val)
- data = reg_set(client, MT9V022_READ_MODE, 0x20);
- else
- data = reg_clear(client, MT9V022_READ_MODE, 0x20);
- if (data < 0)
- return -EIO;
- return 0;
- case V4L2_CID_AUTOGAIN:
- if (ctrl->val) {
- if (reg_set(client, MT9V022_AEC_AGC_ENABLE, 0x2) < 0)
- return -EIO;
- } else {
- struct v4l2_ctrl *gain = mt9v022->gain;
- /* mt9v022 has minimum == default */
- unsigned long range = gain->maximum - gain->minimum;
- /* Valid values 16 to 64, 32 to 64 must be even. */
- unsigned long gain_val = ((gain->val - (s32)gain->minimum) *
- 48 + range / 2) / range + 16;
-
- if (gain_val >= 32)
- gain_val &= ~1;
-
- /*
- * The user wants to set gain manually, hope, she
- * knows, what she's doing... Switch AGC off.
- */
- if (reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x2) < 0)
- return -EIO;
-
- dev_dbg(&client->dev, "Setting gain from %d to %lu\n",
- reg_read(client, MT9V022_ANALOG_GAIN), gain_val);
- if (reg_write(client, MT9V022_ANALOG_GAIN, gain_val) < 0)
- return -EIO;
- }
- return 0;
- case V4L2_CID_EXPOSURE_AUTO:
- if (ctrl->val == V4L2_EXPOSURE_AUTO) {
- data = reg_set(client, MT9V022_AEC_AGC_ENABLE, 0x1);
- } else {
- struct v4l2_ctrl *exp = mt9v022->exposure;
- unsigned long range = exp->maximum - exp->minimum;
- unsigned long shutter = ((exp->val - (s32)exp->minimum) *
- 479 + range / 2) / range + 1;
-
- /*
- * The user wants to set shutter width manually, hope,
- * she knows, what she's doing... Switch AEC off.
- */
- data = reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x1);
- if (data < 0)
- return -EIO;
- dev_dbg(&client->dev, "Shutter width from %d to %lu\n",
- reg_read(client, MT9V022_TOTAL_SHUTTER_WIDTH),
- shutter);
- if (reg_write(client, MT9V022_TOTAL_SHUTTER_WIDTH,
- shutter) < 0)
- return -EIO;
- }
- return 0;
- case V4L2_CID_HBLANK:
- if (reg_write(client, MT9V022_HORIZONTAL_BLANKING,
- ctrl->val) < 0)
- return -EIO;
- return 0;
- case V4L2_CID_VBLANK:
- if (reg_write(client, MT9V022_VERTICAL_BLANKING,
- ctrl->val) < 0)
- return -EIO;
- return 0;
- }
- return -EINVAL;
-}
-
-/*
- * Interface active, can use i2c. If it fails, it can indeed mean, that
- * this wasn't our capture interface, so, we wait for the right one
- */
-static int mt9v022_video_probe(struct i2c_client *client)
-{
- struct mt9v022 *mt9v022 = to_mt9v022(client);
- struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
- s32 data;
- int ret;
- unsigned long flags;
-
- ret = mt9v022_s_power(&mt9v022->subdev, 1);
- if (ret < 0)
- return ret;
-
- /* Read out the chip version register */
- data = reg_read(client, MT9V022_CHIP_VERSION);
-
- /* must be 0x1311, 0x1313 or 0x1324 */
- if (data != 0x1311 && data != 0x1313 && data != 0x1324) {
- ret = -ENODEV;
- dev_info(&client->dev, "No MT9V022 found, ID register 0x%x\n",
- data);
- goto ei2c;
- }
-
- mt9v022->chip_version = data;
-
- mt9v022->reg = is_mt9v024(data) ? &mt9v024_register :
- &mt9v022_register;
-
- /* Soft reset */
- ret = reg_write(client, MT9V022_RESET, 1);
- if (ret < 0)
- goto ei2c;
- /* 15 clock cycles */
- udelay(200);
- if (reg_read(client, MT9V022_RESET)) {
- dev_err(&client->dev, "Resetting MT9V022 failed!\n");
- if (ret > 0)
- ret = -EIO;
- goto ei2c;
- }
-
- /* Set monochrome or colour sensor type */
- if (sensor_type && (!strcmp("colour", sensor_type) ||
- !strcmp("color", sensor_type))) {
- ret = reg_write(client, MT9V022_PIXEL_OPERATION_MODE, 4 | 0x11);
- mt9v022->model = MT9V022IX7ATC;
- mt9v022->fmts = mt9v022_colour_fmts;
- } else {
- ret = reg_write(client, MT9V022_PIXEL_OPERATION_MODE, 0x11);
- mt9v022->model = MT9V022IX7ATM;
- mt9v022->fmts = mt9v022_monochrome_fmts;
- }
-
- if (ret < 0)
- goto ei2c;
-
- mt9v022->num_fmts = 0;
-
- /*
- * This is a 10bit sensor, so by default we only allow 10bit.
- * The platform may support different bus widths due to
- * different routing of the data lines.
- */
- if (ssdd->query_bus_param)
- flags = ssdd->query_bus_param(ssdd);
- else
- flags = SOCAM_DATAWIDTH_10;
-
- if (flags & SOCAM_DATAWIDTH_10)
- mt9v022->num_fmts++;
- else
- mt9v022->fmts++;
-
- if (flags & SOCAM_DATAWIDTH_8)
- mt9v022->num_fmts++;
-
- mt9v022->fmt = &mt9v022->fmts[0];
-
- dev_info(&client->dev, "Detected a MT9V022 chip ID %x, %s sensor\n",
- data, mt9v022->model == MT9V022IX7ATM ?
- "monochrome" : "colour");
-
- ret = mt9v022_init(client);
- if (ret < 0)
- dev_err(&client->dev, "Failed to initialise the camera\n");
-
-ei2c:
- mt9v022_s_power(&mt9v022->subdev, 0);
- return ret;
-}
-
-static int mt9v022_g_skip_top_lines(struct v4l2_subdev *sd, u32 *lines)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct mt9v022 *mt9v022 = to_mt9v022(client);
-
- *lines = mt9v022->y_skip_top;
-
- return 0;
-}
-
-static const struct v4l2_ctrl_ops mt9v022_ctrl_ops = {
- .g_volatile_ctrl = mt9v022_g_volatile_ctrl,
- .s_ctrl = mt9v022_s_ctrl,
-};
-
-static const struct v4l2_subdev_core_ops mt9v022_subdev_core_ops = {
-#ifdef CONFIG_VIDEO_ADV_DEBUG
- .g_register = mt9v022_g_register,
- .s_register = mt9v022_s_register,
-#endif
- .s_power = mt9v022_s_power,
-};
-
-static int mt9v022_enum_mbus_code(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_mbus_code_enum *code)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct mt9v022 *mt9v022 = to_mt9v022(client);
-
- if (code->pad || code->index >= mt9v022->num_fmts)
- return -EINVAL;
-
- code->code = mt9v022->fmts[code->index].code;
- return 0;
-}
-
-static int mt9v022_g_mbus_config(struct v4l2_subdev *sd,
- struct v4l2_mbus_config *cfg)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
-
- cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_SLAVE |
- V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING |
- V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW |
- V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW |
- V4L2_MBUS_DATA_ACTIVE_HIGH;
- cfg->type = V4L2_MBUS_PARALLEL;
- cfg->flags = soc_camera_apply_board_flags(ssdd, cfg);
-
- return 0;
-}
-
-static int mt9v022_s_mbus_config(struct v4l2_subdev *sd,
- const struct v4l2_mbus_config *cfg)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
- struct mt9v022 *mt9v022 = to_mt9v022(client);
- unsigned long flags = soc_camera_apply_board_flags(ssdd, cfg);
- unsigned int bps = soc_mbus_get_fmtdesc(mt9v022->fmt->code)->bits_per_sample;
- int ret;
- u16 pixclk = 0;
-
- if (ssdd->set_bus_param) {
- ret = ssdd->set_bus_param(ssdd, 1 << (bps - 1));
- if (ret)
- return ret;
- } else if (bps != 10) {
- /*
- * Without board specific bus width settings we only support the
- * sensors native bus width
- */
- return -EINVAL;
- }
-
- if (flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
- pixclk |= 0x10;
-
- if (!(flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH))
- pixclk |= 0x1;
-
- if (!(flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH))
- pixclk |= 0x2;
-
- ret = reg_write(client, mt9v022->reg->pixclk_fv_lv, pixclk);
- if (ret < 0)
- return ret;
-
- if (!(flags & V4L2_MBUS_MASTER))
- mt9v022->chip_control &= ~0x8;
-
- ret = reg_write(client, MT9V022_CHIP_CONTROL, mt9v022->chip_control);
- if (ret < 0)
- return ret;
-
- dev_dbg(&client->dev, "Calculated pixclk 0x%x, chip control 0x%x\n",
- pixclk, mt9v022->chip_control);
-
- return 0;
-}
-
-static const struct v4l2_subdev_video_ops mt9v022_subdev_video_ops = {
- .s_stream = mt9v022_s_stream,
- .g_mbus_config = mt9v022_g_mbus_config,
- .s_mbus_config = mt9v022_s_mbus_config,
-};
-
-static const struct v4l2_subdev_sensor_ops mt9v022_subdev_sensor_ops = {
- .g_skip_top_lines = mt9v022_g_skip_top_lines,
-};
-
-static const struct v4l2_subdev_pad_ops mt9v022_subdev_pad_ops = {
- .enum_mbus_code = mt9v022_enum_mbus_code,
- .get_selection = mt9v022_get_selection,
- .set_selection = mt9v022_set_selection,
- .get_fmt = mt9v022_get_fmt,
- .set_fmt = mt9v022_set_fmt,
-};
-
-static const struct v4l2_subdev_ops mt9v022_subdev_ops = {
- .core = &mt9v022_subdev_core_ops,
- .video = &mt9v022_subdev_video_ops,
- .sensor = &mt9v022_subdev_sensor_ops,
- .pad = &mt9v022_subdev_pad_ops,
-};
-
-static int mt9v022_probe(struct i2c_client *client,
- const struct i2c_device_id *did)
-{
- struct mt9v022 *mt9v022;
- struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
- struct i2c_adapter *adapter = client->adapter;
- struct mt9v022_platform_data *pdata;
- int ret;
-
- if (!ssdd) {
- dev_err(&client->dev, "MT9V022 driver needs platform data\n");
- return -EINVAL;
- }
-
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) {
- dev_warn(&adapter->dev,
- "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n");
- return -EIO;
- }
-
- mt9v022 = devm_kzalloc(&client->dev, sizeof(struct mt9v022), GFP_KERNEL);
- if (!mt9v022)
- return -ENOMEM;
-
- pdata = ssdd->drv_priv;
- v4l2_i2c_subdev_init(&mt9v022->subdev, client, &mt9v022_subdev_ops);
- v4l2_ctrl_handler_init(&mt9v022->hdl, 6);
- v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops,
- V4L2_CID_VFLIP, 0, 1, 1, 0);
- v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops,
- V4L2_CID_HFLIP, 0, 1, 1, 0);
- mt9v022->autogain = v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops,
- V4L2_CID_AUTOGAIN, 0, 1, 1, 1);
- mt9v022->gain = v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops,
- V4L2_CID_GAIN, 0, 127, 1, 64);
-
- /*
- * Simulated autoexposure. If enabled, we calculate shutter width
- * ourselves in the driver based on vertical blanking and frame width
- */
- mt9v022->autoexposure = v4l2_ctrl_new_std_menu(&mt9v022->hdl,
- &mt9v022_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, 1, 0,
- V4L2_EXPOSURE_AUTO);
- mt9v022->exposure = v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops,
- V4L2_CID_EXPOSURE, 1, 255, 1, 255);
-
- mt9v022->hblank = v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops,
- V4L2_CID_HBLANK, MT9V022_HORIZONTAL_BLANKING_MIN,
- MT9V022_HORIZONTAL_BLANKING_MAX, 1,
- MT9V022_HORIZONTAL_BLANKING_DEF);
-
- mt9v022->vblank = v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops,
- V4L2_CID_VBLANK, MT9V022_VERTICAL_BLANKING_MIN,
- MT9V022_VERTICAL_BLANKING_MAX, 1,
- MT9V022_VERTICAL_BLANKING_DEF);
-
- mt9v022->subdev.ctrl_handler = &mt9v022->hdl;
- if (mt9v022->hdl.error) {
- int err = mt9v022->hdl.error;
-
- dev_err(&client->dev, "control initialisation err %d\n", err);
- return err;
- }
- v4l2_ctrl_auto_cluster(2, &mt9v022->autoexposure,
- V4L2_EXPOSURE_MANUAL, true);
- v4l2_ctrl_auto_cluster(2, &mt9v022->autogain, 0, true);
-
- mt9v022->chip_control = MT9V022_CHIP_CONTROL_DEFAULT;
-
- /*
- * On some platforms the first read out line is corrupted.
- * Workaround it by skipping if indicated by platform data.
- */
- mt9v022->y_skip_top = pdata ? pdata->y_skip_top : 0;
- mt9v022->rect.left = MT9V022_COLUMN_SKIP;
- mt9v022->rect.top = MT9V022_ROW_SKIP;
- mt9v022->rect.width = MT9V022_MAX_WIDTH;
- mt9v022->rect.height = MT9V022_MAX_HEIGHT;
-
- mt9v022->clk = v4l2_clk_get(&client->dev, "mclk");
- if (IS_ERR(mt9v022->clk)) {
- ret = PTR_ERR(mt9v022->clk);
- goto eclkget;
- }
-
- ret = mt9v022_video_probe(client);
- if (ret) {
- v4l2_clk_put(mt9v022->clk);
-eclkget:
- v4l2_ctrl_handler_free(&mt9v022->hdl);
- }
-
- return ret;
-}
-
-static int mt9v022_remove(struct i2c_client *client)
-{
- struct mt9v022 *mt9v022 = to_mt9v022(client);
- struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
-
- v4l2_clk_put(mt9v022->clk);
- v4l2_device_unregister_subdev(&mt9v022->subdev);
- if (ssdd->free_bus)
- ssdd->free_bus(ssdd);
- v4l2_ctrl_handler_free(&mt9v022->hdl);
-
- return 0;
-}
-static const struct i2c_device_id mt9v022_id[] = {
- { "mt9v022", 0 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, mt9v022_id);
-
-static struct i2c_driver mt9v022_i2c_driver = {
- .driver = {
- .name = "mt9v022",
- },
- .probe = mt9v022_probe,
- .remove = mt9v022_remove,
- .id_table = mt9v022_id,
-};
-
-module_i2c_driver(mt9v022_i2c_driver);
-
-MODULE_DESCRIPTION("Micron MT9V022 Camera driver");
-MODULE_AUTHOR("Guennadi Liakhovetski <kernel@pengutronix.de>");
-MODULE_LICENSE("GPL");
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Driver for OV5642 CMOS Image Sensor from Omnivision
- *
- * Copyright (C) 2011, Bastian Hecht <hechtb@gmail.com>
- *
- * Based on Sony IMX074 Camera Driver
- * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- *
- * Based on Omnivision OV7670 Camera Driver
- * Copyright (C) 2006-7 Jonathan Corbet <corbet@lwn.net>
- */
-#include <linux/bitops.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/videodev2.h>
-#include <linux/module.h>
-#include <linux/v4l2-mediabus.h>
-
-#include <media/soc_camera.h>
-#include <media/v4l2-clk.h>
-#include <media/v4l2-subdev.h>
-
-/* OV5642 registers */
-#define REG_CHIP_ID_HIGH 0x300a
-#define REG_CHIP_ID_LOW 0x300b
-
-#define REG_WINDOW_START_X_HIGH 0x3800
-#define REG_WINDOW_START_X_LOW 0x3801
-#define REG_WINDOW_START_Y_HIGH 0x3802
-#define REG_WINDOW_START_Y_LOW 0x3803
-#define REG_WINDOW_WIDTH_HIGH 0x3804
-#define REG_WINDOW_WIDTH_LOW 0x3805
-#define REG_WINDOW_HEIGHT_HIGH 0x3806
-#define REG_WINDOW_HEIGHT_LOW 0x3807
-#define REG_OUT_WIDTH_HIGH 0x3808
-#define REG_OUT_WIDTH_LOW 0x3809
-#define REG_OUT_HEIGHT_HIGH 0x380a
-#define REG_OUT_HEIGHT_LOW 0x380b
-#define REG_OUT_TOTAL_WIDTH_HIGH 0x380c
-#define REG_OUT_TOTAL_WIDTH_LOW 0x380d
-#define REG_OUT_TOTAL_HEIGHT_HIGH 0x380e
-#define REG_OUT_TOTAL_HEIGHT_LOW 0x380f
-#define REG_OUTPUT_FORMAT 0x4300
-#define REG_ISP_CTRL_01 0x5001
-#define REG_AVG_WINDOW_END_X_HIGH 0x5682
-#define REG_AVG_WINDOW_END_X_LOW 0x5683
-#define REG_AVG_WINDOW_END_Y_HIGH 0x5686
-#define REG_AVG_WINDOW_END_Y_LOW 0x5687
-
-/* active pixel array size */
-#define OV5642_SENSOR_SIZE_X 2592
-#define OV5642_SENSOR_SIZE_Y 1944
-
-/*
- * About OV5642 resolution, cropping and binning:
- * This sensor supports it all, at least in the feature description.
- * Unfortunately, no combination of appropriate registers settings could make
- * the chip work the intended way. As it works with predefined register lists,
- * some undocumented registers are presumably changed there to achieve their
- * goals.
- * This driver currently only works for resolutions up to 720 lines with a
- * 1:1 scale. Hopefully these restrictions will be removed in the future.
- */
-#define OV5642_MAX_WIDTH OV5642_SENSOR_SIZE_X
-#define OV5642_MAX_HEIGHT 720
-
-/* default sizes */
-#define OV5642_DEFAULT_WIDTH 1280
-#define OV5642_DEFAULT_HEIGHT OV5642_MAX_HEIGHT
-
-/* minimum extra blanking */
-#define BLANKING_EXTRA_WIDTH 500
-#define BLANKING_EXTRA_HEIGHT 20
-
-/*
- * the sensor's autoexposure is buggy when setting total_height low.
- * It tries to expose longer than 1 frame period without taking care of it
- * and this leads to weird output. So we set 1000 lines as minimum.
- */
-#define BLANKING_MIN_HEIGHT 1000
-
-struct regval_list {
- u16 reg_num;
- u8 value;
-};
-
-static struct regval_list ov5642_default_regs_init[] = {
- { 0x3103, 0x93 },
- { 0x3008, 0x82 },
- { 0x3017, 0x7f },
- { 0x3018, 0xfc },
- { 0x3810, 0xc2 },
- { 0x3615, 0xf0 },
- { 0x3000, 0x0 },
- { 0x3001, 0x0 },
- { 0x3002, 0x0 },
- { 0x3003, 0x0 },
- { 0x3004, 0xff },
- { 0x3030, 0x2b },
- { 0x3011, 0x8 },
- { 0x3010, 0x10 },
- { 0x3604, 0x60 },
- { 0x3622, 0x60 },
- { 0x3621, 0x9 },
- { 0x3709, 0x0 },
- { 0x4000, 0x21 },
- { 0x401d, 0x22 },
- { 0x3600, 0x54 },
- { 0x3605, 0x4 },
- { 0x3606, 0x3f },
- { 0x3c01, 0x80 },
- { 0x300d, 0x22 },
- { 0x3623, 0x22 },
- { 0x5000, 0x4f },
- { 0x5020, 0x4 },
- { 0x5181, 0x79 },
- { 0x5182, 0x0 },
- { 0x5185, 0x22 },
- { 0x5197, 0x1 },
- { 0x5500, 0xa },
- { 0x5504, 0x0 },
- { 0x5505, 0x7f },
- { 0x5080, 0x8 },
- { 0x300e, 0x18 },
- { 0x4610, 0x0 },
- { 0x471d, 0x5 },
- { 0x4708, 0x6 },
- { 0x370c, 0xa0 },
- { 0x5687, 0x94 },
- { 0x501f, 0x0 },
- { 0x5000, 0x4f },
- { 0x5001, 0xcf },
- { 0x4300, 0x30 },
- { 0x4300, 0x30 },
- { 0x460b, 0x35 },
- { 0x471d, 0x0 },
- { 0x3002, 0xc },
- { 0x3002, 0x0 },
- { 0x4713, 0x3 },
- { 0x471c, 0x50 },
- { 0x4721, 0x2 },
- { 0x4402, 0x90 },
- { 0x460c, 0x22 },
- { 0x3815, 0x44 },
- { 0x3503, 0x7 },
- { 0x3501, 0x73 },
- { 0x3502, 0x80 },
- { 0x350b, 0x0 },
- { 0x3818, 0xc8 },
- { 0x3824, 0x11 },
- { 0x3a00, 0x78 },
- { 0x3a1a, 0x4 },
- { 0x3a13, 0x30 },
- { 0x3a18, 0x0 },
- { 0x3a19, 0x7c },
- { 0x3a08, 0x12 },
- { 0x3a09, 0xc0 },
- { 0x3a0a, 0xf },
- { 0x3a0b, 0xa0 },
- { 0x350c, 0x7 },
- { 0x350d, 0xd0 },
- { 0x3a0d, 0x8 },
- { 0x3a0e, 0x6 },
- { 0x3500, 0x0 },
- { 0x3501, 0x0 },
- { 0x3502, 0x0 },
- { 0x350a, 0x0 },
- { 0x350b, 0x0 },
- { 0x3503, 0x0 },
- { 0x3a0f, 0x3c },
- { 0x3a10, 0x32 },
- { 0x3a1b, 0x3c },
- { 0x3a1e, 0x32 },
- { 0x3a11, 0x80 },
- { 0x3a1f, 0x20 },
- { 0x3030, 0x2b },
- { 0x3a02, 0x0 },
- { 0x3a03, 0x7d },
- { 0x3a04, 0x0 },
- { 0x3a14, 0x0 },
- { 0x3a15, 0x7d },
- { 0x3a16, 0x0 },
- { 0x3a00, 0x78 },
- { 0x3a08, 0x9 },
- { 0x3a09, 0x60 },
- { 0x3a0a, 0x7 },
- { 0x3a0b, 0xd0 },
- { 0x3a0d, 0x10 },
- { 0x3a0e, 0xd },
- { 0x4407, 0x4 },
- { 0x5193, 0x70 },
- { 0x589b, 0x0 },
- { 0x589a, 0xc0 },
- { 0x401e, 0x20 },
- { 0x4001, 0x42 },
- { 0x401c, 0x6 },
- { 0x3825, 0xac },
- { 0x3827, 0xc },
- { 0x528a, 0x1 },
- { 0x528b, 0x4 },
- { 0x528c, 0x8 },
- { 0x528d, 0x10 },
- { 0x528e, 0x20 },
- { 0x528f, 0x28 },
- { 0x5290, 0x30 },
- { 0x5292, 0x0 },
- { 0x5293, 0x1 },
- { 0x5294, 0x0 },
- { 0x5295, 0x4 },
- { 0x5296, 0x0 },
- { 0x5297, 0x8 },
- { 0x5298, 0x0 },
- { 0x5299, 0x10 },
- { 0x529a, 0x0 },
- { 0x529b, 0x20 },
- { 0x529c, 0x0 },
- { 0x529d, 0x28 },
- { 0x529e, 0x0 },
- { 0x529f, 0x30 },
- { 0x5282, 0x0 },
- { 0x5300, 0x0 },
- { 0x5301, 0x20 },
- { 0x5302, 0x0 },
- { 0x5303, 0x7c },
- { 0x530c, 0x0 },
- { 0x530d, 0xc },
- { 0x530e, 0x20 },
- { 0x530f, 0x80 },
- { 0x5310, 0x20 },
- { 0x5311, 0x80 },
- { 0x5308, 0x20 },
- { 0x5309, 0x40 },
- { 0x5304, 0x0 },
- { 0x5305, 0x30 },
- { 0x5306, 0x0 },
- { 0x5307, 0x80 },
- { 0x5314, 0x8 },
- { 0x5315, 0x20 },
- { 0x5319, 0x30 },
- { 0x5316, 0x10 },
- { 0x5317, 0x0 },
- { 0x5318, 0x2 },
- { 0x5380, 0x1 },
- { 0x5381, 0x0 },
- { 0x5382, 0x0 },
- { 0x5383, 0x4e },
- { 0x5384, 0x0 },
- { 0x5385, 0xf },
- { 0x5386, 0x0 },
- { 0x5387, 0x0 },
- { 0x5388, 0x1 },
- { 0x5389, 0x15 },
- { 0x538a, 0x0 },
- { 0x538b, 0x31 },
- { 0x538c, 0x0 },
- { 0x538d, 0x0 },
- { 0x538e, 0x0 },
- { 0x538f, 0xf },
- { 0x5390, 0x0 },
- { 0x5391, 0xab },
- { 0x5392, 0x0 },
- { 0x5393, 0xa2 },
- { 0x5394, 0x8 },
- { 0x5480, 0x14 },
- { 0x5481, 0x21 },
- { 0x5482, 0x36 },
- { 0x5483, 0x57 },
- { 0x5484, 0x65 },
- { 0x5485, 0x71 },
- { 0x5486, 0x7d },
- { 0x5487, 0x87 },
- { 0x5488, 0x91 },
- { 0x5489, 0x9a },
- { 0x548a, 0xaa },
- { 0x548b, 0xb8 },
- { 0x548c, 0xcd },
- { 0x548d, 0xdd },
- { 0x548e, 0xea },
- { 0x548f, 0x1d },
- { 0x5490, 0x5 },
- { 0x5491, 0x0 },
- { 0x5492, 0x4 },
- { 0x5493, 0x20 },
- { 0x5494, 0x3 },
- { 0x5495, 0x60 },
- { 0x5496, 0x2 },
- { 0x5497, 0xb8 },
- { 0x5498, 0x2 },
- { 0x5499, 0x86 },
- { 0x549a, 0x2 },
- { 0x549b, 0x5b },
- { 0x549c, 0x2 },
- { 0x549d, 0x3b },
- { 0x549e, 0x2 },
- { 0x549f, 0x1c },
- { 0x54a0, 0x2 },
- { 0x54a1, 0x4 },
- { 0x54a2, 0x1 },
- { 0x54a3, 0xed },
- { 0x54a4, 0x1 },
- { 0x54a5, 0xc5 },
- { 0x54a6, 0x1 },
- { 0x54a7, 0xa5 },
- { 0x54a8, 0x1 },
- { 0x54a9, 0x6c },
- { 0x54aa, 0x1 },
- { 0x54ab, 0x41 },
- { 0x54ac, 0x1 },
- { 0x54ad, 0x20 },
- { 0x54ae, 0x0 },
- { 0x54af, 0x16 },
- { 0x54b0, 0x1 },
- { 0x54b1, 0x20 },
- { 0x54b2, 0x0 },
- { 0x54b3, 0x10 },
- { 0x54b4, 0x0 },
- { 0x54b5, 0xf0 },
- { 0x54b6, 0x0 },
- { 0x54b7, 0xdf },
- { 0x5402, 0x3f },
- { 0x5403, 0x0 },
- { 0x3406, 0x0 },
- { 0x5180, 0xff },
- { 0x5181, 0x52 },
- { 0x5182, 0x11 },
- { 0x5183, 0x14 },
- { 0x5184, 0x25 },
- { 0x5185, 0x24 },
- { 0x5186, 0x6 },
- { 0x5187, 0x8 },
- { 0x5188, 0x8 },
- { 0x5189, 0x7c },
- { 0x518a, 0x60 },
- { 0x518b, 0xb2 },
- { 0x518c, 0xb2 },
- { 0x518d, 0x44 },
- { 0x518e, 0x3d },
- { 0x518f, 0x58 },
- { 0x5190, 0x46 },
- { 0x5191, 0xf8 },
- { 0x5192, 0x4 },
- { 0x5193, 0x70 },
- { 0x5194, 0xf0 },
- { 0x5195, 0xf0 },
- { 0x5196, 0x3 },
- { 0x5197, 0x1 },
- { 0x5198, 0x4 },
- { 0x5199, 0x12 },
- { 0x519a, 0x4 },
- { 0x519b, 0x0 },
- { 0x519c, 0x6 },
- { 0x519d, 0x82 },
- { 0x519e, 0x0 },
- { 0x5025, 0x80 },
- { 0x3a0f, 0x38 },
- { 0x3a10, 0x30 },
- { 0x3a1b, 0x3a },
- { 0x3a1e, 0x2e },
- { 0x3a11, 0x60 },
- { 0x3a1f, 0x10 },
- { 0x5688, 0xa6 },
- { 0x5689, 0x6a },
- { 0x568a, 0xea },
- { 0x568b, 0xae },
- { 0x568c, 0xa6 },
- { 0x568d, 0x6a },
- { 0x568e, 0x62 },
- { 0x568f, 0x26 },
- { 0x5583, 0x40 },
- { 0x5584, 0x40 },
- { 0x5580, 0x2 },
- { 0x5000, 0xcf },
- { 0x5800, 0x27 },
- { 0x5801, 0x19 },
- { 0x5802, 0x12 },
- { 0x5803, 0xf },
- { 0x5804, 0x10 },
- { 0x5805, 0x15 },
- { 0x5806, 0x1e },
- { 0x5807, 0x2f },
- { 0x5808, 0x15 },
- { 0x5809, 0xd },
- { 0x580a, 0xa },
- { 0x580b, 0x9 },
- { 0x580c, 0xa },
- { 0x580d, 0xc },
- { 0x580e, 0x12 },
- { 0x580f, 0x19 },
- { 0x5810, 0xb },
- { 0x5811, 0x7 },
- { 0x5812, 0x4 },
- { 0x5813, 0x3 },
- { 0x5814, 0x3 },
- { 0x5815, 0x6 },
- { 0x5816, 0xa },
- { 0x5817, 0xf },
- { 0x5818, 0xa },
- { 0x5819, 0x5 },
- { 0x581a, 0x1 },
- { 0x581b, 0x0 },
- { 0x581c, 0x0 },
- { 0x581d, 0x3 },
- { 0x581e, 0x8 },
- { 0x581f, 0xc },
- { 0x5820, 0xa },
- { 0x5821, 0x5 },
- { 0x5822, 0x1 },
- { 0x5823, 0x0 },
- { 0x5824, 0x0 },
- { 0x5825, 0x3 },
- { 0x5826, 0x8 },
- { 0x5827, 0xc },
- { 0x5828, 0xe },
- { 0x5829, 0x8 },
- { 0x582a, 0x6 },
- { 0x582b, 0x4 },
- { 0x582c, 0x5 },
- { 0x582d, 0x7 },
- { 0x582e, 0xb },
- { 0x582f, 0x12 },
- { 0x5830, 0x18 },
- { 0x5831, 0x10 },
- { 0x5832, 0xc },
- { 0x5833, 0xa },
- { 0x5834, 0xb },
- { 0x5835, 0xe },
- { 0x5836, 0x15 },
- { 0x5837, 0x19 },
- { 0x5838, 0x32 },
- { 0x5839, 0x1f },
- { 0x583a, 0x18 },
- { 0x583b, 0x16 },
- { 0x583c, 0x17 },
- { 0x583d, 0x1e },
- { 0x583e, 0x26 },
- { 0x583f, 0x53 },
- { 0x5840, 0x10 },
- { 0x5841, 0xf },
- { 0x5842, 0xd },
- { 0x5843, 0xc },
- { 0x5844, 0xe },
- { 0x5845, 0x9 },
- { 0x5846, 0x11 },
- { 0x5847, 0x10 },
- { 0x5848, 0x10 },
- { 0x5849, 0x10 },
- { 0x584a, 0x10 },
- { 0x584b, 0xe },
- { 0x584c, 0x10 },
- { 0x584d, 0x10 },
- { 0x584e, 0x11 },
- { 0x584f, 0x10 },
- { 0x5850, 0xf },
- { 0x5851, 0xc },
- { 0x5852, 0xf },
- { 0x5853, 0x10 },
- { 0x5854, 0x10 },
- { 0x5855, 0xf },
- { 0x5856, 0xe },
- { 0x5857, 0xb },
- { 0x5858, 0x10 },
- { 0x5859, 0xd },
- { 0x585a, 0xd },
- { 0x585b, 0xc },
- { 0x585c, 0xc },
- { 0x585d, 0xc },
- { 0x585e, 0xb },
- { 0x585f, 0xc },
- { 0x5860, 0xc },
- { 0x5861, 0xc },
- { 0x5862, 0xd },
- { 0x5863, 0x8 },
- { 0x5864, 0x11 },
- { 0x5865, 0x18 },
- { 0x5866, 0x18 },
- { 0x5867, 0x19 },
- { 0x5868, 0x17 },
- { 0x5869, 0x19 },
- { 0x586a, 0x16 },
- { 0x586b, 0x13 },
- { 0x586c, 0x13 },
- { 0x586d, 0x12 },
- { 0x586e, 0x13 },
- { 0x586f, 0x16 },
- { 0x5870, 0x14 },
- { 0x5871, 0x12 },
- { 0x5872, 0x10 },
- { 0x5873, 0x11 },
- { 0x5874, 0x11 },
- { 0x5875, 0x16 },
- { 0x5876, 0x14 },
- { 0x5877, 0x11 },
- { 0x5878, 0x10 },
- { 0x5879, 0xf },
- { 0x587a, 0x10 },
- { 0x587b, 0x14 },
- { 0x587c, 0x13 },
- { 0x587d, 0x12 },
- { 0x587e, 0x11 },
- { 0x587f, 0x11 },
- { 0x5880, 0x12 },
- { 0x5881, 0x15 },
- { 0x5882, 0x14 },
- { 0x5883, 0x15 },
- { 0x5884, 0x15 },
- { 0x5885, 0x15 },
- { 0x5886, 0x13 },
- { 0x5887, 0x17 },
- { 0x3710, 0x10 },
- { 0x3632, 0x51 },
- { 0x3702, 0x10 },
- { 0x3703, 0xb2 },
- { 0x3704, 0x18 },
- { 0x370b, 0x40 },
- { 0x370d, 0x3 },
- { 0x3631, 0x1 },
- { 0x3632, 0x52 },
- { 0x3606, 0x24 },
- { 0x3620, 0x96 },
- { 0x5785, 0x7 },
- { 0x3a13, 0x30 },
- { 0x3600, 0x52 },
- { 0x3604, 0x48 },
- { 0x3606, 0x1b },
- { 0x370d, 0xb },
- { 0x370f, 0xc0 },
- { 0x3709, 0x1 },
- { 0x3823, 0x0 },
- { 0x5007, 0x0 },
- { 0x5009, 0x0 },
- { 0x5011, 0x0 },
- { 0x5013, 0x0 },
- { 0x519e, 0x0 },
- { 0x5086, 0x0 },
- { 0x5087, 0x0 },
- { 0x5088, 0x0 },
- { 0x5089, 0x0 },
- { 0x302b, 0x0 },
- { 0x3503, 0x7 },
- { 0x3011, 0x8 },
- { 0x350c, 0x2 },
- { 0x350d, 0xe4 },
- { 0x3621, 0xc9 },
- { 0x370a, 0x81 },
- { 0xffff, 0xff },
-};
-
-static struct regval_list ov5642_default_regs_finalise[] = {
- { 0x3810, 0xc2 },
- { 0x3818, 0xc9 },
- { 0x381c, 0x10 },
- { 0x381d, 0xa0 },
- { 0x381e, 0x5 },
- { 0x381f, 0xb0 },
- { 0x3820, 0x0 },
- { 0x3821, 0x0 },
- { 0x3824, 0x11 },
- { 0x3a08, 0x1b },
- { 0x3a09, 0xc0 },
- { 0x3a0a, 0x17 },
- { 0x3a0b, 0x20 },
- { 0x3a0d, 0x2 },
- { 0x3a0e, 0x1 },
- { 0x401c, 0x4 },
- { 0x5682, 0x5 },
- { 0x5683, 0x0 },
- { 0x5686, 0x2 },
- { 0x5687, 0xcc },
- { 0x5001, 0x4f },
- { 0x589b, 0x6 },
- { 0x589a, 0xc5 },
- { 0x3503, 0x0 },
- { 0x460c, 0x20 },
- { 0x460b, 0x37 },
- { 0x471c, 0xd0 },
- { 0x471d, 0x5 },
- { 0x3815, 0x1 },
- { 0x3818, 0xc1 },
- { 0x501f, 0x0 },
- { 0x5002, 0xe0 },
- { 0x4300, 0x32 }, /* UYVY */
- { 0x3002, 0x1c },
- { 0x4800, 0x14 },
- { 0x4801, 0xf },
- { 0x3007, 0x3b },
- { 0x300e, 0x4 },
- { 0x4803, 0x50 },
- { 0x3815, 0x1 },
- { 0x4713, 0x2 },
- { 0x4842, 0x1 },
- { 0x300f, 0xe },
- { 0x3003, 0x3 },
- { 0x3003, 0x1 },
- { 0xffff, 0xff },
-};
-
-struct ov5642_datafmt {
- u32 code;
- enum v4l2_colorspace colorspace;
-};
-
-struct ov5642 {
- struct v4l2_subdev subdev;
- const struct ov5642_datafmt *fmt;
- struct v4l2_rect crop_rect;
- struct v4l2_clk *clk;
-
- /* blanking information */
- int total_width;
- int total_height;
-};
-
-static const struct ov5642_datafmt ov5642_colour_fmts[] = {
- {MEDIA_BUS_FMT_UYVY8_2X8, V4L2_COLORSPACE_JPEG},
-};
-
-static struct ov5642 *to_ov5642(const struct i2c_client *client)
-{
- return container_of(i2c_get_clientdata(client), struct ov5642, subdev);
-}
-
-/* Find a data format by a pixel code in an array */
-static const struct ov5642_datafmt
- *ov5642_find_datafmt(u32 code)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(ov5642_colour_fmts); i++)
- if (ov5642_colour_fmts[i].code == code)
- return ov5642_colour_fmts + i;
-
- return NULL;
-}
-
-static int reg_read(struct i2c_client *client, u16 reg, u8 *val)
-{
- int ret;
- /* We have 16-bit i2c addresses - care for endianness */
- unsigned char data[2] = { reg >> 8, reg & 0xff };
-
- ret = i2c_master_send(client, data, 2);
- if (ret < 2) {
- dev_err(&client->dev, "%s: i2c read error, reg: %x\n",
- __func__, reg);
- return ret < 0 ? ret : -EIO;
- }
-
- ret = i2c_master_recv(client, val, 1);
- if (ret < 1) {
- dev_err(&client->dev, "%s: i2c read error, reg: %x\n",
- __func__, reg);
- return ret < 0 ? ret : -EIO;
- }
- return 0;
-}
-
-static int reg_write(struct i2c_client *client, u16 reg, u8 val)
-{
- int ret;
- unsigned char data[3] = { reg >> 8, reg & 0xff, val };
-
- ret = i2c_master_send(client, data, 3);
- if (ret < 3) {
- dev_err(&client->dev, "%s: i2c write error, reg: %x\n",
- __func__, reg);
- return ret < 0 ? ret : -EIO;
- }
-
- return 0;
-}
-
-/*
- * convenience function to write 16 bit register values that are split up
- * into two consecutive high and low parts
- */
-static int reg_write16(struct i2c_client *client, u16 reg, u16 val16)
-{
- int ret;
-
- ret = reg_write(client, reg, val16 >> 8);
- if (ret)
- return ret;
- return reg_write(client, reg + 1, val16 & 0x00ff);
-}
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int ov5642_get_register(struct v4l2_subdev *sd,
- struct v4l2_dbg_register *reg)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- int ret;
- u8 val;
-
- if (reg->reg & ~0xffff)
- return -EINVAL;
-
- reg->size = 1;
-
- ret = reg_read(client, reg->reg, &val);
- if (!ret)
- reg->val = (__u64)val;
-
- return ret;
-}
-
-static int ov5642_set_register(struct v4l2_subdev *sd,
- const struct v4l2_dbg_register *reg)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
-
- if (reg->reg & ~0xffff || reg->val & ~0xff)
- return -EINVAL;
-
- return reg_write(client, reg->reg, reg->val);
-}
-#endif
-
-static int ov5642_write_array(struct i2c_client *client,
- struct regval_list *vals)
-{
- while (vals->reg_num != 0xffff || vals->value != 0xff) {
- int ret = reg_write(client, vals->reg_num, vals->value);
- if (ret < 0)
- return ret;
- vals++;
- }
- dev_dbg(&client->dev, "Register list loaded\n");
- return 0;
-}
-
-static int ov5642_set_resolution(struct v4l2_subdev *sd)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct ov5642 *priv = to_ov5642(client);
- int width = priv->crop_rect.width;
- int height = priv->crop_rect.height;
- int total_width = priv->total_width;
- int total_height = priv->total_height;
- int start_x = (OV5642_SENSOR_SIZE_X - width) / 2;
- int start_y = (OV5642_SENSOR_SIZE_Y - height) / 2;
- int ret;
-
- /*
- * This should set the starting point for cropping.
- * Doesn't work so far.
- */
- ret = reg_write16(client, REG_WINDOW_START_X_HIGH, start_x);
- if (!ret)
- ret = reg_write16(client, REG_WINDOW_START_Y_HIGH, start_y);
- if (!ret) {
- priv->crop_rect.left = start_x;
- priv->crop_rect.top = start_y;
- }
-
- if (!ret)
- ret = reg_write16(client, REG_WINDOW_WIDTH_HIGH, width);
- if (!ret)
- ret = reg_write16(client, REG_WINDOW_HEIGHT_HIGH, height);
- if (ret)
- return ret;
- priv->crop_rect.width = width;
- priv->crop_rect.height = height;
-
- /* Set the output window size. Only 1:1 scale is supported so far. */
- ret = reg_write16(client, REG_OUT_WIDTH_HIGH, width);
- if (!ret)
- ret = reg_write16(client, REG_OUT_HEIGHT_HIGH, height);
-
- /* Total width = output size + blanking */
- if (!ret)
- ret = reg_write16(client, REG_OUT_TOTAL_WIDTH_HIGH, total_width);
- if (!ret)
- ret = reg_write16(client, REG_OUT_TOTAL_HEIGHT_HIGH, total_height);
-
- /* Sets the window for AWB calculations */
- if (!ret)
- ret = reg_write16(client, REG_AVG_WINDOW_END_X_HIGH, width);
- if (!ret)
- ret = reg_write16(client, REG_AVG_WINDOW_END_Y_HIGH, height);
-
- return ret;
-}
-
-static int ov5642_set_fmt(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_format *format)
-{
- struct v4l2_mbus_framefmt *mf = &format->format;
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct ov5642 *priv = to_ov5642(client);
- const struct ov5642_datafmt *fmt = ov5642_find_datafmt(mf->code);
-
- if (format->pad)
- return -EINVAL;
-
- mf->width = priv->crop_rect.width;
- mf->height = priv->crop_rect.height;
-
- if (!fmt) {
- if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
- return -EINVAL;
- mf->code = ov5642_colour_fmts[0].code;
- mf->colorspace = ov5642_colour_fmts[0].colorspace;
- }
-
- mf->field = V4L2_FIELD_NONE;
-
- if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
- priv->fmt = fmt;
- else
- cfg->try_fmt = *mf;
- return 0;
-}
-
-static int ov5642_get_fmt(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_format *format)
-{
- struct v4l2_mbus_framefmt *mf = &format->format;
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct ov5642 *priv = to_ov5642(client);
-
- const struct ov5642_datafmt *fmt = priv->fmt;
-
- if (format->pad)
- return -EINVAL;
-
- mf->code = fmt->code;
- mf->colorspace = fmt->colorspace;
- mf->width = priv->crop_rect.width;
- mf->height = priv->crop_rect.height;
- mf->field = V4L2_FIELD_NONE;
-
- return 0;
-}
-
-static int ov5642_enum_mbus_code(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_mbus_code_enum *code)
-{
- if (code->pad || code->index >= ARRAY_SIZE(ov5642_colour_fmts))
- return -EINVAL;
-
- code->code = ov5642_colour_fmts[code->index].code;
- return 0;
-}
-
-static int ov5642_set_selection(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_selection *sel)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct ov5642 *priv = to_ov5642(client);
- struct v4l2_rect rect = sel->r;
- int ret;
-
- if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE ||
- sel->target != V4L2_SEL_TGT_CROP)
- return -EINVAL;
-
- v4l_bound_align_image(&rect.width, 48, OV5642_MAX_WIDTH, 1,
- &rect.height, 32, OV5642_MAX_HEIGHT, 1, 0);
-
- priv->crop_rect.width = rect.width;
- priv->crop_rect.height = rect.height;
- priv->total_width = rect.width + BLANKING_EXTRA_WIDTH;
- priv->total_height = max_t(int, rect.height +
- BLANKING_EXTRA_HEIGHT,
- BLANKING_MIN_HEIGHT);
- priv->crop_rect.width = rect.width;
- priv->crop_rect.height = rect.height;
-
- ret = ov5642_write_array(client, ov5642_default_regs_init);
- if (!ret)
- ret = ov5642_set_resolution(sd);
- if (!ret)
- ret = ov5642_write_array(client, ov5642_default_regs_finalise);
-
- return ret;
-}
-
-static int ov5642_get_selection(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_selection *sel)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct ov5642 *priv = to_ov5642(client);
-
- if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
- return -EINVAL;
-
- switch (sel->target) {
- case V4L2_SEL_TGT_CROP_BOUNDS:
- sel->r.left = 0;
- sel->r.top = 0;
- sel->r.width = OV5642_MAX_WIDTH;
- sel->r.height = OV5642_MAX_HEIGHT;
- return 0;
- case V4L2_SEL_TGT_CROP:
- sel->r = priv->crop_rect;
- return 0;
- default:
- return -EINVAL;
- }
-}
-
-static int ov5642_g_mbus_config(struct v4l2_subdev *sd,
- struct v4l2_mbus_config *cfg)
-{
- cfg->type = V4L2_MBUS_CSI2_DPHY;
- cfg->flags = V4L2_MBUS_CSI2_2_LANE | V4L2_MBUS_CSI2_CHANNEL_0 |
- V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
-
- return 0;
-}
-
-static int ov5642_s_power(struct v4l2_subdev *sd, int on)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
- struct ov5642 *priv = to_ov5642(client);
- int ret;
-
- if (!on)
- return soc_camera_power_off(&client->dev, ssdd, priv->clk);
-
- ret = soc_camera_power_on(&client->dev, ssdd, priv->clk);
- if (ret < 0)
- return ret;
-
- ret = ov5642_write_array(client, ov5642_default_regs_init);
- if (!ret)
- ret = ov5642_set_resolution(sd);
- if (!ret)
- ret = ov5642_write_array(client, ov5642_default_regs_finalise);
-
- return ret;
-}
-
-static const struct v4l2_subdev_video_ops ov5642_subdev_video_ops = {
- .g_mbus_config = ov5642_g_mbus_config,
-};
-
-static const struct v4l2_subdev_pad_ops ov5642_subdev_pad_ops = {
- .enum_mbus_code = ov5642_enum_mbus_code,
- .get_selection = ov5642_get_selection,
- .set_selection = ov5642_set_selection,
- .get_fmt = ov5642_get_fmt,
- .set_fmt = ov5642_set_fmt,
-};
-
-static const struct v4l2_subdev_core_ops ov5642_subdev_core_ops = {
- .s_power = ov5642_s_power,
-#ifdef CONFIG_VIDEO_ADV_DEBUG
- .g_register = ov5642_get_register,
- .s_register = ov5642_set_register,
-#endif
-};
-
-static const struct v4l2_subdev_ops ov5642_subdev_ops = {
- .core = &ov5642_subdev_core_ops,
- .video = &ov5642_subdev_video_ops,
- .pad = &ov5642_subdev_pad_ops,
-};
-
-static int ov5642_video_probe(struct i2c_client *client)
-{
- struct v4l2_subdev *subdev = i2c_get_clientdata(client);
- int ret;
- u8 id_high, id_low;
- u16 id;
-
- ret = ov5642_s_power(subdev, 1);
- if (ret < 0)
- return ret;
-
- /* Read sensor Model ID */
- ret = reg_read(client, REG_CHIP_ID_HIGH, &id_high);
- if (ret < 0)
- goto done;
-
- id = id_high << 8;
-
- ret = reg_read(client, REG_CHIP_ID_LOW, &id_low);
- if (ret < 0)
- goto done;
-
- id |= id_low;
-
- dev_info(&client->dev, "Chip ID 0x%04x detected\n", id);
-
- if (id != 0x5642) {
- ret = -ENODEV;
- goto done;
- }
-
- ret = 0;
-
-done:
- ov5642_s_power(subdev, 0);
- return ret;
-}
-
-static int ov5642_probe(struct i2c_client *client,
- const struct i2c_device_id *did)
-{
- struct ov5642 *priv;
- struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
- int ret;
-
- if (!ssdd) {
- dev_err(&client->dev, "OV5642: missing platform data!\n");
- return -EINVAL;
- }
-
- priv = devm_kzalloc(&client->dev, sizeof(struct ov5642), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
-
- v4l2_i2c_subdev_init(&priv->subdev, client, &ov5642_subdev_ops);
-
- priv->fmt = &ov5642_colour_fmts[0];
-
- priv->crop_rect.width = OV5642_DEFAULT_WIDTH;
- priv->crop_rect.height = OV5642_DEFAULT_HEIGHT;
- priv->crop_rect.left = (OV5642_MAX_WIDTH - OV5642_DEFAULT_WIDTH) / 2;
- priv->crop_rect.top = (OV5642_MAX_HEIGHT - OV5642_DEFAULT_HEIGHT) / 2;
- priv->total_width = OV5642_DEFAULT_WIDTH + BLANKING_EXTRA_WIDTH;
- priv->total_height = BLANKING_MIN_HEIGHT;
-
- priv->clk = v4l2_clk_get(&client->dev, "mclk");
- if (IS_ERR(priv->clk))
- return PTR_ERR(priv->clk);
-
- ret = ov5642_video_probe(client);
- if (ret < 0)
- v4l2_clk_put(priv->clk);
-
- return ret;
-}
-
-static int ov5642_remove(struct i2c_client *client)
-{
- struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
- struct ov5642 *priv = to_ov5642(client);
-
- v4l2_clk_put(priv->clk);
- if (ssdd->free_bus)
- ssdd->free_bus(ssdd);
-
- return 0;
-}
-
-static const struct i2c_device_id ov5642_id[] = {
- { "ov5642", 0 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, ov5642_id);
-
-#if IS_ENABLED(CONFIG_OF)
-static const struct of_device_id ov5642_of_match[] = {
- { .compatible = "ovti,ov5642" },
- { },
-};
-MODULE_DEVICE_TABLE(of, ov5642_of_match);
-#endif
-
-static struct i2c_driver ov5642_i2c_driver = {
- .driver = {
- .name = "ov5642",
- .of_match_table = of_match_ptr(ov5642_of_match),
- },
- .probe = ov5642_probe,
- .remove = ov5642_remove,
- .id_table = ov5642_id,
-};
-
-module_i2c_driver(ov5642_i2c_driver);
-
-MODULE_DESCRIPTION("Omnivision OV5642 Camera driver");
-MODULE_AUTHOR("Bastian Hecht <hechtb@gmail.com>");
-MODULE_LICENSE("GPL v2");
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * OmniVision OV9740 Camera Driver
- *
- * Copyright (C) 2011 NVIDIA Corporation
- *
- * Based on ov9640 camera driver.
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/i2c.h>
-#include <linux/slab.h>
-#include <linux/v4l2-mediabus.h>
-
-#include <media/soc_camera.h>
-#include <media/v4l2-clk.h>
-#include <media/v4l2-ctrls.h>
-
-#define to_ov9740(sd) container_of(sd, struct ov9740_priv, subdev)
-
-/* General Status Registers */
-#define OV9740_MODEL_ID_HI 0x0000
-#define OV9740_MODEL_ID_LO 0x0001
-#define OV9740_REVISION_NUMBER 0x0002
-#define OV9740_MANUFACTURER_ID 0x0003
-#define OV9740_SMIA_VERSION 0x0004
-
-/* General Setup Registers */
-#define OV9740_MODE_SELECT 0x0100
-#define OV9740_IMAGE_ORT 0x0101
-#define OV9740_SOFTWARE_RESET 0x0103
-#define OV9740_GRP_PARAM_HOLD 0x0104
-#define OV9740_MSK_CORRUP_FM 0x0105
-
-/* Timing Setting */
-#define OV9740_FRM_LENGTH_LN_HI 0x0340 /* VTS */
-#define OV9740_FRM_LENGTH_LN_LO 0x0341 /* VTS */
-#define OV9740_LN_LENGTH_PCK_HI 0x0342 /* HTS */
-#define OV9740_LN_LENGTH_PCK_LO 0x0343 /* HTS */
-#define OV9740_X_ADDR_START_HI 0x0344
-#define OV9740_X_ADDR_START_LO 0x0345
-#define OV9740_Y_ADDR_START_HI 0x0346
-#define OV9740_Y_ADDR_START_LO 0x0347
-#define OV9740_X_ADDR_END_HI 0x0348
-#define OV9740_X_ADDR_END_LO 0x0349
-#define OV9740_Y_ADDR_END_HI 0x034a
-#define OV9740_Y_ADDR_END_LO 0x034b
-#define OV9740_X_OUTPUT_SIZE_HI 0x034c
-#define OV9740_X_OUTPUT_SIZE_LO 0x034d
-#define OV9740_Y_OUTPUT_SIZE_HI 0x034e
-#define OV9740_Y_OUTPUT_SIZE_LO 0x034f
-
-/* IO Control Registers */
-#define OV9740_IO_CREL00 0x3002
-#define OV9740_IO_CREL01 0x3004
-#define OV9740_IO_CREL02 0x3005
-#define OV9740_IO_OUTPUT_SEL01 0x3026
-#define OV9740_IO_OUTPUT_SEL02 0x3027
-
-/* AWB Registers */
-#define OV9740_AWB_MANUAL_CTRL 0x3406
-
-/* Analog Control Registers */
-#define OV9740_ANALOG_CTRL01 0x3601
-#define OV9740_ANALOG_CTRL02 0x3602
-#define OV9740_ANALOG_CTRL03 0x3603
-#define OV9740_ANALOG_CTRL04 0x3604
-#define OV9740_ANALOG_CTRL10 0x3610
-#define OV9740_ANALOG_CTRL12 0x3612
-#define OV9740_ANALOG_CTRL15 0x3615
-#define OV9740_ANALOG_CTRL20 0x3620
-#define OV9740_ANALOG_CTRL21 0x3621
-#define OV9740_ANALOG_CTRL22 0x3622
-#define OV9740_ANALOG_CTRL30 0x3630
-#define OV9740_ANALOG_CTRL31 0x3631
-#define OV9740_ANALOG_CTRL32 0x3632
-#define OV9740_ANALOG_CTRL33 0x3633
-
-/* Sensor Control */
-#define OV9740_SENSOR_CTRL03 0x3703
-#define OV9740_SENSOR_CTRL04 0x3704
-#define OV9740_SENSOR_CTRL05 0x3705
-#define OV9740_SENSOR_CTRL07 0x3707
-
-/* Timing Control */
-#define OV9740_TIMING_CTRL17 0x3817
-#define OV9740_TIMING_CTRL19 0x3819
-#define OV9740_TIMING_CTRL33 0x3833
-#define OV9740_TIMING_CTRL35 0x3835
-
-/* Banding Filter */
-#define OV9740_AEC_MAXEXPO_60_H 0x3a02
-#define OV9740_AEC_MAXEXPO_60_L 0x3a03
-#define OV9740_AEC_B50_STEP_HI 0x3a08
-#define OV9740_AEC_B50_STEP_LO 0x3a09
-#define OV9740_AEC_B60_STEP_HI 0x3a0a
-#define OV9740_AEC_B60_STEP_LO 0x3a0b
-#define OV9740_AEC_CTRL0D 0x3a0d
-#define OV9740_AEC_CTRL0E 0x3a0e
-#define OV9740_AEC_MAXEXPO_50_H 0x3a14
-#define OV9740_AEC_MAXEXPO_50_L 0x3a15
-
-/* AEC/AGC Control */
-#define OV9740_AEC_ENABLE 0x3503
-#define OV9740_GAIN_CEILING_01 0x3a18
-#define OV9740_GAIN_CEILING_02 0x3a19
-#define OV9740_AEC_HI_THRESHOLD 0x3a11
-#define OV9740_AEC_3A1A 0x3a1a
-#define OV9740_AEC_CTRL1B_WPT2 0x3a1b
-#define OV9740_AEC_CTRL0F_WPT 0x3a0f
-#define OV9740_AEC_CTRL10_BPT 0x3a10
-#define OV9740_AEC_CTRL1E_BPT2 0x3a1e
-#define OV9740_AEC_LO_THRESHOLD 0x3a1f
-
-/* BLC Control */
-#define OV9740_BLC_AUTO_ENABLE 0x4002
-#define OV9740_BLC_MODE 0x4005
-
-/* VFIFO */
-#define OV9740_VFIFO_READ_START_HI 0x4608
-#define OV9740_VFIFO_READ_START_LO 0x4609
-
-/* DVP Control */
-#define OV9740_DVP_VSYNC_CTRL02 0x4702
-#define OV9740_DVP_VSYNC_MODE 0x4704
-#define OV9740_DVP_VSYNC_CTRL06 0x4706
-
-/* PLL Setting */
-#define OV9740_PLL_MODE_CTRL01 0x3104
-#define OV9740_PRE_PLL_CLK_DIV 0x0305
-#define OV9740_PLL_MULTIPLIER 0x0307
-#define OV9740_VT_SYS_CLK_DIV 0x0303
-#define OV9740_VT_PIX_CLK_DIV 0x0301
-#define OV9740_PLL_CTRL3010 0x3010
-#define OV9740_VFIFO_CTRL00 0x460e
-
-/* ISP Control */
-#define OV9740_ISP_CTRL00 0x5000
-#define OV9740_ISP_CTRL01 0x5001
-#define OV9740_ISP_CTRL03 0x5003
-#define OV9740_ISP_CTRL05 0x5005
-#define OV9740_ISP_CTRL12 0x5012
-#define OV9740_ISP_CTRL19 0x5019
-#define OV9740_ISP_CTRL1A 0x501a
-#define OV9740_ISP_CTRL1E 0x501e
-#define OV9740_ISP_CTRL1F 0x501f
-#define OV9740_ISP_CTRL20 0x5020
-#define OV9740_ISP_CTRL21 0x5021
-
-/* AWB */
-#define OV9740_AWB_CTRL00 0x5180
-#define OV9740_AWB_CTRL01 0x5181
-#define OV9740_AWB_CTRL02 0x5182
-#define OV9740_AWB_CTRL03 0x5183
-#define OV9740_AWB_ADV_CTRL01 0x5184
-#define OV9740_AWB_ADV_CTRL02 0x5185
-#define OV9740_AWB_ADV_CTRL03 0x5186
-#define OV9740_AWB_ADV_CTRL04 0x5187
-#define OV9740_AWB_ADV_CTRL05 0x5188
-#define OV9740_AWB_ADV_CTRL06 0x5189
-#define OV9740_AWB_ADV_CTRL07 0x518a
-#define OV9740_AWB_ADV_CTRL08 0x518b
-#define OV9740_AWB_ADV_CTRL09 0x518c
-#define OV9740_AWB_ADV_CTRL10 0x518d
-#define OV9740_AWB_ADV_CTRL11 0x518e
-#define OV9740_AWB_CTRL0F 0x518f
-#define OV9740_AWB_CTRL10 0x5190
-#define OV9740_AWB_CTRL11 0x5191
-#define OV9740_AWB_CTRL12 0x5192
-#define OV9740_AWB_CTRL13 0x5193
-#define OV9740_AWB_CTRL14 0x5194
-
-/* MIPI Control */
-#define OV9740_MIPI_CTRL00 0x4800
-#define OV9740_MIPI_3837 0x3837
-#define OV9740_MIPI_CTRL01 0x4801
-#define OV9740_MIPI_CTRL03 0x4803
-#define OV9740_MIPI_CTRL05 0x4805
-#define OV9740_VFIFO_RD_CTRL 0x4601
-#define OV9740_MIPI_CTRL_3012 0x3012
-#define OV9740_SC_CMMM_MIPI_CTR 0x3014
-
-#define OV9740_MAX_WIDTH 1280
-#define OV9740_MAX_HEIGHT 720
-
-/* Misc. structures */
-struct ov9740_reg {
- u16 reg;
- u8 val;
-};
-
-struct ov9740_priv {
- struct v4l2_subdev subdev;
- struct v4l2_ctrl_handler hdl;
- struct v4l2_clk *clk;
-
- u16 model;
- u8 revision;
- u8 manid;
- u8 smiaver;
-
- bool flag_vflip;
- bool flag_hflip;
-
- /* For suspend/resume. */
- struct v4l2_mbus_framefmt current_mf;
- bool current_enable;
-};
-
-static const struct ov9740_reg ov9740_defaults[] = {
- /* Software Reset */
- { OV9740_SOFTWARE_RESET, 0x01 },
-
- /* Banding Filter */
- { OV9740_AEC_B50_STEP_HI, 0x00 },
- { OV9740_AEC_B50_STEP_LO, 0xe8 },
- { OV9740_AEC_CTRL0E, 0x03 },
- { OV9740_AEC_MAXEXPO_50_H, 0x15 },
- { OV9740_AEC_MAXEXPO_50_L, 0xc6 },
- { OV9740_AEC_B60_STEP_HI, 0x00 },
- { OV9740_AEC_B60_STEP_LO, 0xc0 },
- { OV9740_AEC_CTRL0D, 0x04 },
- { OV9740_AEC_MAXEXPO_60_H, 0x18 },
- { OV9740_AEC_MAXEXPO_60_L, 0x20 },
-
- /* LC */
- { 0x5842, 0x02 }, { 0x5843, 0x5e }, { 0x5844, 0x04 }, { 0x5845, 0x32 },
- { 0x5846, 0x03 }, { 0x5847, 0x29 }, { 0x5848, 0x02 }, { 0x5849, 0xcc },
-
- /* Un-documented OV9740 registers */
- { 0x5800, 0x29 }, { 0x5801, 0x25 }, { 0x5802, 0x20 }, { 0x5803, 0x21 },
- { 0x5804, 0x26 }, { 0x5805, 0x2e }, { 0x5806, 0x11 }, { 0x5807, 0x0c },
- { 0x5808, 0x09 }, { 0x5809, 0x0a }, { 0x580a, 0x0e }, { 0x580b, 0x16 },
- { 0x580c, 0x06 }, { 0x580d, 0x02 }, { 0x580e, 0x00 }, { 0x580f, 0x00 },
- { 0x5810, 0x04 }, { 0x5811, 0x0a }, { 0x5812, 0x05 }, { 0x5813, 0x02 },
- { 0x5814, 0x00 }, { 0x5815, 0x00 }, { 0x5816, 0x03 }, { 0x5817, 0x09 },
- { 0x5818, 0x0f }, { 0x5819, 0x0a }, { 0x581a, 0x07 }, { 0x581b, 0x08 },
- { 0x581c, 0x0b }, { 0x581d, 0x14 }, { 0x581e, 0x28 }, { 0x581f, 0x23 },
- { 0x5820, 0x1d }, { 0x5821, 0x1e }, { 0x5822, 0x24 }, { 0x5823, 0x2a },
- { 0x5824, 0x4f }, { 0x5825, 0x6f }, { 0x5826, 0x5f }, { 0x5827, 0x7f },
- { 0x5828, 0x9f }, { 0x5829, 0x5f }, { 0x582a, 0x8f }, { 0x582b, 0x9e },
- { 0x582c, 0x8f }, { 0x582d, 0x9f }, { 0x582e, 0x4f }, { 0x582f, 0x87 },
- { 0x5830, 0x86 }, { 0x5831, 0x97 }, { 0x5832, 0xae }, { 0x5833, 0x3f },
- { 0x5834, 0x8e }, { 0x5835, 0x7c }, { 0x5836, 0x7e }, { 0x5837, 0xaf },
- { 0x5838, 0x8f }, { 0x5839, 0x8f }, { 0x583a, 0x9f }, { 0x583b, 0x7f },
- { 0x583c, 0x5f },
-
- /* Y Gamma */
- { 0x5480, 0x07 }, { 0x5481, 0x18 }, { 0x5482, 0x2c }, { 0x5483, 0x4e },
- { 0x5484, 0x5e }, { 0x5485, 0x6b }, { 0x5486, 0x77 }, { 0x5487, 0x82 },
- { 0x5488, 0x8c }, { 0x5489, 0x95 }, { 0x548a, 0xa4 }, { 0x548b, 0xb1 },
- { 0x548c, 0xc6 }, { 0x548d, 0xd8 }, { 0x548e, 0xe9 },
-
- /* UV Gamma */
- { 0x5490, 0x0f }, { 0x5491, 0xff }, { 0x5492, 0x0d }, { 0x5493, 0x05 },
- { 0x5494, 0x07 }, { 0x5495, 0x1a }, { 0x5496, 0x04 }, { 0x5497, 0x01 },
- { 0x5498, 0x03 }, { 0x5499, 0x53 }, { 0x549a, 0x02 }, { 0x549b, 0xeb },
- { 0x549c, 0x02 }, { 0x549d, 0xa0 }, { 0x549e, 0x02 }, { 0x549f, 0x67 },
- { 0x54a0, 0x02 }, { 0x54a1, 0x3b }, { 0x54a2, 0x02 }, { 0x54a3, 0x18 },
- { 0x54a4, 0x01 }, { 0x54a5, 0xe7 }, { 0x54a6, 0x01 }, { 0x54a7, 0xc3 },
- { 0x54a8, 0x01 }, { 0x54a9, 0x94 }, { 0x54aa, 0x01 }, { 0x54ab, 0x72 },
- { 0x54ac, 0x01 }, { 0x54ad, 0x57 },
-
- /* AWB */
- { OV9740_AWB_CTRL00, 0xf0 },
- { OV9740_AWB_CTRL01, 0x00 },
- { OV9740_AWB_CTRL02, 0x41 },
- { OV9740_AWB_CTRL03, 0x42 },
- { OV9740_AWB_ADV_CTRL01, 0x8a },
- { OV9740_AWB_ADV_CTRL02, 0x61 },
- { OV9740_AWB_ADV_CTRL03, 0xce },
- { OV9740_AWB_ADV_CTRL04, 0xa8 },
- { OV9740_AWB_ADV_CTRL05, 0x17 },
- { OV9740_AWB_ADV_CTRL06, 0x1f },
- { OV9740_AWB_ADV_CTRL07, 0x27 },
- { OV9740_AWB_ADV_CTRL08, 0x41 },
- { OV9740_AWB_ADV_CTRL09, 0x34 },
- { OV9740_AWB_ADV_CTRL10, 0xf0 },
- { OV9740_AWB_ADV_CTRL11, 0x10 },
- { OV9740_AWB_CTRL0F, 0xff },
- { OV9740_AWB_CTRL10, 0x00 },
- { OV9740_AWB_CTRL11, 0xff },
- { OV9740_AWB_CTRL12, 0x00 },
- { OV9740_AWB_CTRL13, 0xff },
- { OV9740_AWB_CTRL14, 0x00 },
-
- /* CIP */
- { 0x530d, 0x12 },
-
- /* CMX */
- { 0x5380, 0x01 }, { 0x5381, 0x00 }, { 0x5382, 0x00 }, { 0x5383, 0x17 },
- { 0x5384, 0x00 }, { 0x5385, 0x01 }, { 0x5386, 0x00 }, { 0x5387, 0x00 },
- { 0x5388, 0x00 }, { 0x5389, 0xe0 }, { 0x538a, 0x00 }, { 0x538b, 0x20 },
- { 0x538c, 0x00 }, { 0x538d, 0x00 }, { 0x538e, 0x00 }, { 0x538f, 0x16 },
- { 0x5390, 0x00 }, { 0x5391, 0x9c }, { 0x5392, 0x00 }, { 0x5393, 0xa0 },
- { 0x5394, 0x18 },
-
- /* 50/60 Detection */
- { 0x3c0a, 0x9c }, { 0x3c0b, 0x3f },
-
- /* Output Select */
- { OV9740_IO_OUTPUT_SEL01, 0x00 },
- { OV9740_IO_OUTPUT_SEL02, 0x00 },
- { OV9740_IO_CREL00, 0x00 },
- { OV9740_IO_CREL01, 0x00 },
- { OV9740_IO_CREL02, 0x00 },
-
- /* AWB Control */
- { OV9740_AWB_MANUAL_CTRL, 0x00 },
-
- /* Analog Control */
- { OV9740_ANALOG_CTRL03, 0xaa },
- { OV9740_ANALOG_CTRL32, 0x2f },
- { OV9740_ANALOG_CTRL20, 0x66 },
- { OV9740_ANALOG_CTRL21, 0xc0 },
- { OV9740_ANALOG_CTRL31, 0x52 },
- { OV9740_ANALOG_CTRL33, 0x50 },
- { OV9740_ANALOG_CTRL30, 0xca },
- { OV9740_ANALOG_CTRL04, 0x0c },
- { OV9740_ANALOG_CTRL01, 0x40 },
- { OV9740_ANALOG_CTRL02, 0x16 },
- { OV9740_ANALOG_CTRL10, 0xa1 },
- { OV9740_ANALOG_CTRL12, 0x24 },
- { OV9740_ANALOG_CTRL22, 0x9f },
- { OV9740_ANALOG_CTRL15, 0xf0 },
-
- /* Sensor Control */
- { OV9740_SENSOR_CTRL03, 0x42 },
- { OV9740_SENSOR_CTRL04, 0x10 },
- { OV9740_SENSOR_CTRL05, 0x45 },
- { OV9740_SENSOR_CTRL07, 0x14 },
-
- /* Timing Control */
- { OV9740_TIMING_CTRL33, 0x04 },
- { OV9740_TIMING_CTRL35, 0x02 },
- { OV9740_TIMING_CTRL19, 0x6e },
- { OV9740_TIMING_CTRL17, 0x94 },
-
- /* AEC/AGC Control */
- { OV9740_AEC_ENABLE, 0x10 },
- { OV9740_GAIN_CEILING_01, 0x00 },
- { OV9740_GAIN_CEILING_02, 0x7f },
- { OV9740_AEC_HI_THRESHOLD, 0xa0 },
- { OV9740_AEC_3A1A, 0x05 },
- { OV9740_AEC_CTRL1B_WPT2, 0x50 },
- { OV9740_AEC_CTRL0F_WPT, 0x50 },
- { OV9740_AEC_CTRL10_BPT, 0x4c },
- { OV9740_AEC_CTRL1E_BPT2, 0x4c },
- { OV9740_AEC_LO_THRESHOLD, 0x26 },
-
- /* BLC Control */
- { OV9740_BLC_AUTO_ENABLE, 0x45 },
- { OV9740_BLC_MODE, 0x18 },
-
- /* DVP Control */
- { OV9740_DVP_VSYNC_CTRL02, 0x04 },
- { OV9740_DVP_VSYNC_MODE, 0x00 },
- { OV9740_DVP_VSYNC_CTRL06, 0x08 },
-
- /* PLL Setting */
- { OV9740_PLL_MODE_CTRL01, 0x20 },
- { OV9740_PRE_PLL_CLK_DIV, 0x03 },
- { OV9740_PLL_MULTIPLIER, 0x4c },
- { OV9740_VT_SYS_CLK_DIV, 0x01 },
- { OV9740_VT_PIX_CLK_DIV, 0x08 },
- { OV9740_PLL_CTRL3010, 0x01 },
- { OV9740_VFIFO_CTRL00, 0x82 },
-
- /* Timing Setting */
- /* VTS */
- { OV9740_FRM_LENGTH_LN_HI, 0x03 },
- { OV9740_FRM_LENGTH_LN_LO, 0x07 },
- /* HTS */
- { OV9740_LN_LENGTH_PCK_HI, 0x06 },
- { OV9740_LN_LENGTH_PCK_LO, 0x62 },
-
- /* MIPI Control */
- { OV9740_MIPI_CTRL00, 0x44 }, /* 0x64 for discontinuous clk */
- { OV9740_MIPI_3837, 0x01 },
- { OV9740_MIPI_CTRL01, 0x0f },
- { OV9740_MIPI_CTRL03, 0x05 },
- { OV9740_MIPI_CTRL05, 0x10 },
- { OV9740_VFIFO_RD_CTRL, 0x16 },
- { OV9740_MIPI_CTRL_3012, 0x70 },
- { OV9740_SC_CMMM_MIPI_CTR, 0x01 },
-
- /* YUYV order */
- { OV9740_ISP_CTRL19, 0x02 },
-};
-
-static u32 ov9740_codes[] = {
- MEDIA_BUS_FMT_YUYV8_2X8,
-};
-
-/* read a register */
-static int ov9740_reg_read(struct i2c_client *client, u16 reg, u8 *val)
-{
- int ret;
- struct i2c_msg msg[] = {
- {
- .addr = client->addr,
- .flags = 0,
- .len = 2,
- .buf = (u8 *)®,
- },
- {
- .addr = client->addr,
- .flags = I2C_M_RD,
- .len = 1,
- .buf = val,
- },
- };
-
- reg = swab16(reg);
-
- ret = i2c_transfer(client->adapter, msg, 2);
- if (ret < 0) {
- dev_err(&client->dev, "Failed reading register 0x%04x!\n", reg);
- return ret;
- }
-
- return 0;
-}
-
-/* write a register */
-static int ov9740_reg_write(struct i2c_client *client, u16 reg, u8 val)
-{
- struct i2c_msg msg;
- struct {
- u16 reg;
- u8 val;
- } __packed buf;
- int ret;
-
- reg = swab16(reg);
-
- buf.reg = reg;
- buf.val = val;
-
- msg.addr = client->addr;
- msg.flags = 0;
- msg.len = 3;
- msg.buf = (u8 *)&buf;
-
- ret = i2c_transfer(client->adapter, &msg, 1);
- if (ret < 0) {
- dev_err(&client->dev, "Failed writing register 0x%04x!\n", reg);
- return ret;
- }
-
- return 0;
-}
-
-
-/* Read a register, alter its bits, write it back */
-static int ov9740_reg_rmw(struct i2c_client *client, u16 reg, u8 set, u8 unset)
-{
- u8 val;
- int ret;
-
- ret = ov9740_reg_read(client, reg, &val);
- if (ret < 0) {
- dev_err(&client->dev,
- "[Read]-Modify-Write of register 0x%04x failed!\n",
- reg);
- return ret;
- }
-
- val |= set;
- val &= ~unset;
-
- ret = ov9740_reg_write(client, reg, val);
- if (ret < 0) {
- dev_err(&client->dev,
- "Read-Modify-[Write] of register 0x%04x failed!\n",
- reg);
- return ret;
- }
-
- return 0;
-}
-
-static int ov9740_reg_write_array(struct i2c_client *client,
- const struct ov9740_reg *regarray,
- int regarraylen)
-{
- int i;
- int ret;
-
- for (i = 0; i < regarraylen; i++) {
- ret = ov9740_reg_write(client,
- regarray[i].reg, regarray[i].val);
- if (ret < 0)
- return ret;
- }
-
- return 0;
-}
-
-/* Start/Stop streaming from the device */
-static int ov9740_s_stream(struct v4l2_subdev *sd, int enable)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct ov9740_priv *priv = to_ov9740(sd);
- int ret;
-
- /* Program orientation register. */
- if (priv->flag_vflip)
- ret = ov9740_reg_rmw(client, OV9740_IMAGE_ORT, 0x2, 0);
- else
- ret = ov9740_reg_rmw(client, OV9740_IMAGE_ORT, 0, 0x2);
- if (ret < 0)
- return ret;
-
- if (priv->flag_hflip)
- ret = ov9740_reg_rmw(client, OV9740_IMAGE_ORT, 0x1, 0);
- else
- ret = ov9740_reg_rmw(client, OV9740_IMAGE_ORT, 0, 0x1);
- if (ret < 0)
- return ret;
-
- if (enable) {
- dev_dbg(&client->dev, "Enabling Streaming\n");
- /* Start Streaming */
- ret = ov9740_reg_write(client, OV9740_MODE_SELECT, 0x01);
-
- } else {
- dev_dbg(&client->dev, "Disabling Streaming\n");
- /* Software Reset */
- ret = ov9740_reg_write(client, OV9740_SOFTWARE_RESET, 0x01);
- if (!ret)
- /* Setting Streaming to Standby */
- ret = ov9740_reg_write(client, OV9740_MODE_SELECT,
- 0x00);
- }
-
- priv->current_enable = enable;
-
- return ret;
-}
-
-/* select nearest higher resolution for capture */
-static void ov9740_res_roundup(u32 *width, u32 *height)
-{
- /* Width must be a multiple of 4 pixels. */
- *width = ALIGN(*width, 4);
-
- /* Max resolution is 1280x720 (720p). */
- if (*width > OV9740_MAX_WIDTH)
- *width = OV9740_MAX_WIDTH;
-
- if (*height > OV9740_MAX_HEIGHT)
- *height = OV9740_MAX_HEIGHT;
-}
-
-/* Setup registers according to resolution and color encoding */
-static int ov9740_set_res(struct i2c_client *client, u32 width, u32 height)
-{
- u32 x_start;
- u32 y_start;
- u32 x_end;
- u32 y_end;
- bool scaling = false;
- u32 scale_input_x;
- u32 scale_input_y;
- int ret;
-
- if ((width != OV9740_MAX_WIDTH) || (height != OV9740_MAX_HEIGHT))
- scaling = true;
-
- /*
- * Try to use as much of the sensor area as possible when supporting
- * smaller resolutions. Depending on the aspect ratio of the
- * chosen resolution, we can either use the full width of the sensor,
- * or the full height of the sensor (or both if the aspect ratio is
- * the same as 1280x720.
- */
- if ((OV9740_MAX_WIDTH * height) > (OV9740_MAX_HEIGHT * width)) {
- scale_input_x = (OV9740_MAX_HEIGHT * width) / height;
- scale_input_y = OV9740_MAX_HEIGHT;
- } else {
- scale_input_x = OV9740_MAX_WIDTH;
- scale_input_y = (OV9740_MAX_WIDTH * height) / width;
- }
-
- /* These describe the area of the sensor to use. */
- x_start = (OV9740_MAX_WIDTH - scale_input_x) / 2;
- y_start = (OV9740_MAX_HEIGHT - scale_input_y) / 2;
- x_end = x_start + scale_input_x - 1;
- y_end = y_start + scale_input_y - 1;
-
- ret = ov9740_reg_write(client, OV9740_X_ADDR_START_HI, x_start >> 8);
- if (ret)
- goto done;
- ret = ov9740_reg_write(client, OV9740_X_ADDR_START_LO, x_start & 0xff);
- if (ret)
- goto done;
- ret = ov9740_reg_write(client, OV9740_Y_ADDR_START_HI, y_start >> 8);
- if (ret)
- goto done;
- ret = ov9740_reg_write(client, OV9740_Y_ADDR_START_LO, y_start & 0xff);
- if (ret)
- goto done;
-
- ret = ov9740_reg_write(client, OV9740_X_ADDR_END_HI, x_end >> 8);
- if (ret)
- goto done;
- ret = ov9740_reg_write(client, OV9740_X_ADDR_END_LO, x_end & 0xff);
- if (ret)
- goto done;
- ret = ov9740_reg_write(client, OV9740_Y_ADDR_END_HI, y_end >> 8);
- if (ret)
- goto done;
- ret = ov9740_reg_write(client, OV9740_Y_ADDR_END_LO, y_end & 0xff);
- if (ret)
- goto done;
-
- ret = ov9740_reg_write(client, OV9740_X_OUTPUT_SIZE_HI, width >> 8);
- if (ret)
- goto done;
- ret = ov9740_reg_write(client, OV9740_X_OUTPUT_SIZE_LO, width & 0xff);
- if (ret)
- goto done;
- ret = ov9740_reg_write(client, OV9740_Y_OUTPUT_SIZE_HI, height >> 8);
- if (ret)
- goto done;
- ret = ov9740_reg_write(client, OV9740_Y_OUTPUT_SIZE_LO, height & 0xff);
- if (ret)
- goto done;
-
- ret = ov9740_reg_write(client, OV9740_ISP_CTRL1E, scale_input_x >> 8);
- if (ret)
- goto done;
- ret = ov9740_reg_write(client, OV9740_ISP_CTRL1F, scale_input_x & 0xff);
- if (ret)
- goto done;
- ret = ov9740_reg_write(client, OV9740_ISP_CTRL20, scale_input_y >> 8);
- if (ret)
- goto done;
- ret = ov9740_reg_write(client, OV9740_ISP_CTRL21, scale_input_y & 0xff);
- if (ret)
- goto done;
-
- ret = ov9740_reg_write(client, OV9740_VFIFO_READ_START_HI,
- (scale_input_x - width) >> 8);
- if (ret)
- goto done;
- ret = ov9740_reg_write(client, OV9740_VFIFO_READ_START_LO,
- (scale_input_x - width) & 0xff);
- if (ret)
- goto done;
-
- ret = ov9740_reg_write(client, OV9740_ISP_CTRL00, 0xff);
- if (ret)
- goto done;
- ret = ov9740_reg_write(client, OV9740_ISP_CTRL01, 0xef |
- (scaling << 4));
- if (ret)
- goto done;
- ret = ov9740_reg_write(client, OV9740_ISP_CTRL03, 0xff);
-
-done:
- return ret;
-}
-
-/* set the format we will capture in */
-static int ov9740_s_fmt(struct v4l2_subdev *sd,
- struct v4l2_mbus_framefmt *mf)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct ov9740_priv *priv = to_ov9740(sd);
- int ret;
-
- ret = ov9740_reg_write_array(client, ov9740_defaults,
- ARRAY_SIZE(ov9740_defaults));
- if (ret < 0)
- return ret;
-
- ret = ov9740_set_res(client, mf->width, mf->height);
- if (ret < 0)
- return ret;
-
- priv->current_mf = *mf;
- return ret;
-}
-
-static int ov9740_set_fmt(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_format *format)
-{
- struct v4l2_mbus_framefmt *mf = &format->format;
-
- if (format->pad)
- return -EINVAL;
-
- ov9740_res_roundup(&mf->width, &mf->height);
-
- mf->field = V4L2_FIELD_NONE;
- mf->code = MEDIA_BUS_FMT_YUYV8_2X8;
- mf->colorspace = V4L2_COLORSPACE_SRGB;
-
- if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
- return ov9740_s_fmt(sd, mf);
- cfg->try_fmt = *mf;
- return 0;
-}
-
-static int ov9740_enum_mbus_code(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_mbus_code_enum *code)
-{
- if (code->pad || code->index >= ARRAY_SIZE(ov9740_codes))
- return -EINVAL;
-
- code->code = ov9740_codes[code->index];
-
- return 0;
-}
-
-static int ov9740_get_selection(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_selection *sel)
-{
- if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
- return -EINVAL;
-
- switch (sel->target) {
- case V4L2_SEL_TGT_CROP_BOUNDS:
- case V4L2_SEL_TGT_CROP:
- sel->r.left = 0;
- sel->r.top = 0;
- sel->r.width = OV9740_MAX_WIDTH;
- sel->r.height = OV9740_MAX_HEIGHT;
- return 0;
- default:
- return -EINVAL;
- }
-}
-
-/* Set status of additional camera capabilities */
-static int ov9740_s_ctrl(struct v4l2_ctrl *ctrl)
-{
- struct ov9740_priv *priv =
- container_of(ctrl->handler, struct ov9740_priv, hdl);
-
- switch (ctrl->id) {
- case V4L2_CID_VFLIP:
- priv->flag_vflip = ctrl->val;
- break;
- case V4L2_CID_HFLIP:
- priv->flag_hflip = ctrl->val;
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int ov9740_s_power(struct v4l2_subdev *sd, int on)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
- struct ov9740_priv *priv = to_ov9740(sd);
- int ret;
-
- if (on) {
- ret = soc_camera_power_on(&client->dev, ssdd, priv->clk);
- if (ret < 0)
- return ret;
-
- if (priv->current_enable) {
- ov9740_s_fmt(sd, &priv->current_mf);
- ov9740_s_stream(sd, 1);
- }
- } else {
- if (priv->current_enable) {
- ov9740_s_stream(sd, 0);
- priv->current_enable = true;
- }
-
- soc_camera_power_off(&client->dev, ssdd, priv->clk);
- }
-
- return 0;
-}
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int ov9740_get_register(struct v4l2_subdev *sd,
- struct v4l2_dbg_register *reg)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- int ret;
- u8 val;
-
- if (reg->reg & ~0xffff)
- return -EINVAL;
-
- reg->size = 2;
-
- ret = ov9740_reg_read(client, reg->reg, &val);
- if (ret)
- return ret;
-
- reg->val = (__u64)val;
-
- return ret;
-}
-
-static int ov9740_set_register(struct v4l2_subdev *sd,
- const struct v4l2_dbg_register *reg)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
-
- if (reg->reg & ~0xffff || reg->val & ~0xff)
- return -EINVAL;
-
- return ov9740_reg_write(client, reg->reg, reg->val);
-}
-#endif
-
-static int ov9740_video_probe(struct i2c_client *client)
-{
- struct v4l2_subdev *sd = i2c_get_clientdata(client);
- struct ov9740_priv *priv = to_ov9740(sd);
- u8 modelhi, modello;
- int ret;
-
- ret = ov9740_s_power(&priv->subdev, 1);
- if (ret < 0)
- return ret;
-
- /*
- * check and show product ID and manufacturer ID
- */
- ret = ov9740_reg_read(client, OV9740_MODEL_ID_HI, &modelhi);
- if (ret < 0)
- goto done;
-
- ret = ov9740_reg_read(client, OV9740_MODEL_ID_LO, &modello);
- if (ret < 0)
- goto done;
-
- priv->model = (modelhi << 8) | modello;
-
- ret = ov9740_reg_read(client, OV9740_REVISION_NUMBER, &priv->revision);
- if (ret < 0)
- goto done;
-
- ret = ov9740_reg_read(client, OV9740_MANUFACTURER_ID, &priv->manid);
- if (ret < 0)
- goto done;
-
- ret = ov9740_reg_read(client, OV9740_SMIA_VERSION, &priv->smiaver);
- if (ret < 0)
- goto done;
-
- if (priv->model != 0x9740) {
- ret = -ENODEV;
- goto done;
- }
-
- dev_info(&client->dev, "ov9740 Model ID 0x%04x, Revision 0x%02x, Manufacturer 0x%02x, SMIA Version 0x%02x\n",
- priv->model, priv->revision, priv->manid, priv->smiaver);
-
- ret = v4l2_ctrl_handler_setup(&priv->hdl);
-
-done:
- ov9740_s_power(&priv->subdev, 0);
- return ret;
-}
-
-/* Request bus settings on camera side */
-static int ov9740_g_mbus_config(struct v4l2_subdev *sd,
- struct v4l2_mbus_config *cfg)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
-
- cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
- V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
- V4L2_MBUS_DATA_ACTIVE_HIGH;
- cfg->type = V4L2_MBUS_PARALLEL;
- cfg->flags = soc_camera_apply_board_flags(ssdd, cfg);
-
- return 0;
-}
-
-static const struct v4l2_subdev_video_ops ov9740_video_ops = {
- .s_stream = ov9740_s_stream,
- .g_mbus_config = ov9740_g_mbus_config,
-};
-
-static const struct v4l2_subdev_core_ops ov9740_core_ops = {
- .s_power = ov9740_s_power,
-#ifdef CONFIG_VIDEO_ADV_DEBUG
- .g_register = ov9740_get_register,
- .s_register = ov9740_set_register,
-#endif
-};
-
-static const struct v4l2_subdev_pad_ops ov9740_pad_ops = {
- .enum_mbus_code = ov9740_enum_mbus_code,
- .get_selection = ov9740_get_selection,
- .set_fmt = ov9740_set_fmt,
-};
-
-static const struct v4l2_subdev_ops ov9740_subdev_ops = {
- .core = &ov9740_core_ops,
- .video = &ov9740_video_ops,
- .pad = &ov9740_pad_ops,
-};
-
-static const struct v4l2_ctrl_ops ov9740_ctrl_ops = {
- .s_ctrl = ov9740_s_ctrl,
-};
-
-/*
- * i2c_driver function
- */
-static int ov9740_probe(struct i2c_client *client,
- const struct i2c_device_id *did)
-{
- struct ov9740_priv *priv;
- struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
- int ret;
-
- if (!ssdd) {
- dev_err(&client->dev, "Missing platform_data for driver\n");
- return -EINVAL;
- }
-
- priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
-
- v4l2_i2c_subdev_init(&priv->subdev, client, &ov9740_subdev_ops);
- v4l2_ctrl_handler_init(&priv->hdl, 13);
- v4l2_ctrl_new_std(&priv->hdl, &ov9740_ctrl_ops,
- V4L2_CID_VFLIP, 0, 1, 1, 0);
- v4l2_ctrl_new_std(&priv->hdl, &ov9740_ctrl_ops,
- V4L2_CID_HFLIP, 0, 1, 1, 0);
- priv->subdev.ctrl_handler = &priv->hdl;
- if (priv->hdl.error)
- return priv->hdl.error;
-
- priv->clk = v4l2_clk_get(&client->dev, "mclk");
- if (IS_ERR(priv->clk)) {
- ret = PTR_ERR(priv->clk);
- goto eclkget;
- }
-
- ret = ov9740_video_probe(client);
- if (ret < 0) {
- v4l2_clk_put(priv->clk);
-eclkget:
- v4l2_ctrl_handler_free(&priv->hdl);
- }
-
- return ret;
-}
-
-static int ov9740_remove(struct i2c_client *client)
-{
- struct ov9740_priv *priv = i2c_get_clientdata(client);
-
- v4l2_clk_put(priv->clk);
- v4l2_device_unregister_subdev(&priv->subdev);
- v4l2_ctrl_handler_free(&priv->hdl);
- return 0;
-}
-
-static const struct i2c_device_id ov9740_id[] = {
- { "ov9740", 0 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, ov9740_id);
-
-static struct i2c_driver ov9740_i2c_driver = {
- .driver = {
- .name = "ov9740",
- },
- .probe = ov9740_probe,
- .remove = ov9740_remove,
- .id_table = ov9740_id,
-};
-
-module_i2c_driver(ov9740_i2c_driver);
-
-MODULE_DESCRIPTION("SoC Camera driver for OmniVision OV9740");
-MODULE_AUTHOR("Andrew Chew <achew@nvidia.com>");
-MODULE_LICENSE("GPL v2");
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * SoC-camera Media Bus API extensions
- *
- * Copyright (C) 2009, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- */
-
-#ifndef SOC_MEDIABUS_H
-#define SOC_MEDIABUS_H
-
-#include <linux/videodev2.h>
-#include <linux/v4l2-mediabus.h>
-
-/**
- * enum soc_mbus_packing - data packing types on the media-bus
- * @SOC_MBUS_PACKING_NONE: no packing, bit-for-bit transfer to RAM, one
- * sample represents one pixel
- * @SOC_MBUS_PACKING_2X8_PADHI: 16 bits transferred in 2 8-bit samples, in the
- * possibly incomplete byte high bits are padding
- * @SOC_MBUS_PACKING_2X8_PADLO: as above, but low bits are padding
- * @SOC_MBUS_PACKING_EXTEND16: sample width (e.g., 10 bits) has to be extended
- * to 16 bits
- * @SOC_MBUS_PACKING_VARIABLE: compressed formats with variable packing
- * @SOC_MBUS_PACKING_1_5X8: used for packed YUV 4:2:0 formats, where 4
- * pixels occupy 6 bytes in RAM
- * @SOC_MBUS_PACKING_EXTEND32: sample width (e.g., 24 bits) has to be extended
- * to 32 bits
- */
-enum soc_mbus_packing {
- SOC_MBUS_PACKING_NONE,
- SOC_MBUS_PACKING_2X8_PADHI,
- SOC_MBUS_PACKING_2X8_PADLO,
- SOC_MBUS_PACKING_EXTEND16,
- SOC_MBUS_PACKING_VARIABLE,
- SOC_MBUS_PACKING_1_5X8,
- SOC_MBUS_PACKING_EXTEND32,
-};
-
-/**
- * enum soc_mbus_order - sample order on the media bus
- * @SOC_MBUS_ORDER_LE: least significant sample first
- * @SOC_MBUS_ORDER_BE: most significant sample first
- */
-enum soc_mbus_order {
- SOC_MBUS_ORDER_LE,
- SOC_MBUS_ORDER_BE,
-};
-
-/**
- * enum soc_mbus_layout - planes layout in memory
- * @SOC_MBUS_LAYOUT_PACKED: color components packed
- * @SOC_MBUS_LAYOUT_PLANAR_2Y_U_V: YUV components stored in 3 planes (4:2:2)
- * @SOC_MBUS_LAYOUT_PLANAR_2Y_C: YUV components stored in a luma and a
- * chroma plane (C plane is half the size
- * of Y plane)
- * @SOC_MBUS_LAYOUT_PLANAR_Y_C: YUV components stored in a luma and a
- * chroma plane (C plane is the same size
- * as Y plane)
- */
-enum soc_mbus_layout {
- SOC_MBUS_LAYOUT_PACKED = 0,
- SOC_MBUS_LAYOUT_PLANAR_2Y_U_V,
- SOC_MBUS_LAYOUT_PLANAR_2Y_C,
- SOC_MBUS_LAYOUT_PLANAR_Y_C,
-};
-
-/**
- * struct soc_mbus_pixelfmt - Data format on the media bus
- * @fourcc: Fourcc code, that will be obtained if the data is
- * stored in memory in the following way:
- * @packing: Type of sample-packing, that has to be used
- * @order: Sample order when storing in memory
- * @bits_per_sample: How many bits the bridge has to sample
- */
-struct soc_mbus_pixelfmt {
- u32 fourcc;
- enum soc_mbus_packing packing;
- enum soc_mbus_order order;
- enum soc_mbus_layout layout;
- u8 bits_per_sample;
-};
-
-/**
- * struct soc_mbus_lookup - Lookup FOURCC IDs by mediabus codes for pass-through
- * @code: mediabus pixel-code
- * @fmt: pixel format description
- */
-struct soc_mbus_lookup {
- u32 code;
- struct soc_mbus_pixelfmt fmt;
-};
-
-const struct soc_mbus_pixelfmt *soc_mbus_find_fmtdesc(
- u32 code,
- const struct soc_mbus_lookup *lookup,
- int n);
-const struct soc_mbus_pixelfmt *soc_mbus_get_fmtdesc(
- u32 code);
-s32 soc_mbus_bytes_per_line(u32 width, const struct soc_mbus_pixelfmt *mf);
-s32 soc_mbus_image_size(const struct soc_mbus_pixelfmt *mf,
- u32 bytes_per_line, u32 height);
-int soc_mbus_samples_per_pixel(const struct soc_mbus_pixelfmt *mf,
- unsigned int *numerator, unsigned int *denominator);
-unsigned int soc_mbus_config_compatible(const struct v4l2_mbus_config *cfg,
- unsigned int flags);
-
-#endif
projects / linux-2.6-microblaze.git / commitdiff