minimum: 0x1
maximum: 0xff
description: |
- Dynamic address to be assigned to this device. This property is only
- valid if the I3C device has a static address (first cell of the reg
- property != 0).
+ Dynamic address to be assigned to this device. In case static address is
+ present (first cell of the reg property != 0), this address is assigned
+ through SETDASA. If static address is not present, this address is assigned
+ through SETNEWDA after assigning a temporary address via ENTDAA.
required:
- reg
pagesize = <0x8>;
};
- /* I3C device with a static I2C address. */
+ /* I3C device with a static I2C address and assigned address. */
thermal_sensor: sensor@68,39200144004 {
reg = <0x68 0x392 0x144004>;
assigned-address = <0xa>;
};
+ /* I3C device with only assigned address. */
+ pressure_sensor: sensor@0,39200124004 {
+ reg = <0x0 0x392 0x124000>;
+ assigned-address = <0xc>;
+ };
+
/*
* I3C device without a static I2C address but requiring
* resources described in the DT.
if (dev->info.static_addr) {
status = i3c_bus_get_addr_slot_status(&master->bus,
dev->info.static_addr);
- if (status != I3C_ADDR_SLOT_FREE)
+ /* Since static address and assigned dynamic address can be
+ * equal, allow this case to pass.
+ */
+ if (status != I3C_ADDR_SLOT_FREE &&
+ dev->info.static_addr != dev->boardinfo->init_dyn_addr)
return -EBUSY;
i3c_bus_set_addr_slot_status(&master->bus,
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
-#include <linux/of_device.h>
#define DEV_ID 0x0
#define DEV_ID_I3C_MASTER 0x5034
break;
}
if (RESP_STATUS(xfer[0].response) == RESP_ERR_NACK &&
- RESP_STATUS(xfer[0].response) == 1) {
+ RESP_DATA_LENGTH(xfer->response) == 1) {
ret = 0; /* no more devices to be assigned */
break;
}
* @base: I3C master controller
* @dev: Corresponding device
* @regs: Memory mapping
+ * @saved_regs: Volatile values for PM operations
* @free_slots: Bit array of available slots
* @addrs: Array containing the dynamic addresses of each attached device
* @descs: Array of descriptors, one per attached device
*/
break;
} else if (SVC_I3C_MSTATUS_NACKED(reg)) {
+ /* No I3C devices attached */
+ if (dev_nb == 0)
+ break;
+
/*
* A slave device nacked the address, this is
* allowed only once, DAA will be stopped and
{
struct svc_i3c_master *master = to_svc_i3c_master(m);
bool broadcast = cmd->id < 0x80;
+ int ret;
if (broadcast)
- return svc_i3c_master_send_bdcast_ccc_cmd(master, cmd);
+ ret = svc_i3c_master_send_bdcast_ccc_cmd(master, cmd);
else
- return svc_i3c_master_send_direct_ccc_cmd(master, cmd);
+ ret = svc_i3c_master_send_direct_ccc_cmd(master, cmd);
+
+ if (ret)
+ cmd->err = I3C_ERROR_M2;
+
+ return ret;
}
static int svc_i3c_master_priv_xfers(struct i3c_dev_desc *dev,
return PTR_ERR(master->sclk);
master->irq = platform_get_irq(pdev, 0);
- if (master->irq <= 0)
- return -ENOENT;
+ if (master->irq < 0)
+ return master->irq;
master->dev = dev;