pm2301: Enable vbat low monitoring
authorRajkumar Kasirajan <rajkumar.kasirajan@stericsson.com>
Mon, 28 May 2012 10:27:33 +0000 (15:57 +0530)
committerLee Jones <lee.jones@linaro.org>
Wed, 23 Jan 2013 14:39:19 +0000 (14:39 +0000)
Enable support for low battery checking.

Signed-off-by: Rajkumar Kasirajan <rajkumar.kasirajan@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
drivers/power/pm2301_charger.c

index 8c1dd56..9b2e894 100644 (file)
@@ -118,6 +118,8 @@ static int pm2xxx_reg_read(struct pm2xxx_charger *pm2, int reg, u8 *val)
                                1, val);
        if (ret < 0)
                dev_err(pm2->dev, "Error reading register at 0x%x\n", reg);
+       else
+               ret = 0;
 
        return ret;
 }
@@ -130,6 +132,8 @@ static int pm2xxx_reg_write(struct pm2xxx_charger *pm2, int reg, u8 val)
                                1, &val);
        if (ret < 0)
                dev_err(pm2->dev, "Error writing register at 0x%x\n", reg);
+       else
+               ret = 0;
 
        return ret;
 }
@@ -227,7 +231,7 @@ static int pm2xxx_charger_bat_disc_mngt(struct pm2xxx_charger *pm2, int val)
 
 static int pm2xxx_charger_detection(struct pm2xxx_charger *pm2, u8 *val)
 {
-       int ret = 0;
+       int ret;
 
        ret = pm2xxx_reg_read(pm2, PM2XXX_SRCE_REG_INT2, val);
 
@@ -237,6 +241,7 @@ static int pm2xxx_charger_detection(struct pm2xxx_charger *pm2, u8 *val)
        }
 
        *val &= (PM2XXX_INT2_S_ITVPWR1PLUG | PM2XXX_INT2_S_ITVPWR2PLUG);
+
 out:
        return ret;
 }
@@ -628,7 +633,7 @@ static int pm2xxx_charging_init(struct pm2xxx_charger *pm2)
 
        /* Disable battery low monitoring */
        ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_LOW_LEV_COMP_REG,
-               PM2XXX_VBAT_LOW_MONITORING_DIS);
+               PM2XXX_VBAT_LOW_MONITORING_ENA);
 
        /* Disable LED */
        ret = pm2xxx_reg_write(pm2, PM2XXX_LED_CTRL_REG,
@@ -677,53 +682,51 @@ static int pm2xxx_charger_ac_en(struct ux500_charger *charger,
                }
 
                ret = pm2xxx_reg_read(pm2, PM2XXX_BATT_CTRL_REG8, &val);
-               if (ret >= 0) {
-                       val &= ~PM2XXX_CH_VOLT_MASK;
-                       val |= volt_index;
-                       ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG8, val);
-
-                       if (ret < 0) {
-                               dev_err(pm2->dev,
-                                       "%s write failed\n", __func__);
-                               goto error_occured;
-                       }
-               else
-                       dev_err(pm2->dev, "%s read failed\n", __func__);
+               if (ret < 0) {
+                       dev_err(pm2->dev, "%s pm2xxx read failed\n", __func__);
+                       goto error_occured;
+               }
+               val &= ~PM2XXX_CH_VOLT_MASK;
+               val |= volt_index;
+               ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG8, val);
+               if (ret < 0) {
+                       dev_err(pm2->dev, "%s pm2xxx write failed\n", __func__);
+                       goto error_occured;
                }
 
                ret = pm2xxx_reg_read(pm2, PM2XXX_BATT_CTRL_REG6, &val);
-               if (ret >= 0) {
-                       val &= ~PM2XXX_DIR_CH_CC_CURRENT_MASK;
-                       val |= curr_index;
-                       ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG6, val);
-                       if (ret < 0) {
-                               dev_err(pm2->dev,
-                                       "%s write failed\n", __func__);
-                               goto error_occured;
-                       }
-               else
-                       dev_err(pm2->dev, "%s read failed\n", __func__);
+               if (ret < 0) {
+                       dev_err(pm2->dev, "%s pm2xxx read failed\n", __func__);
+                       goto error_occured;
+               }
+               val &= ~PM2XXX_DIR_CH_CC_CURRENT_MASK;
+               val |= curr_index;
+               ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG6, val);
+               if (ret < 0) {
+                       dev_err(pm2->dev, "%s pm2xxx write failed\n", __func__);
+                       goto error_occured;
                }
 
                if (!pm2->bat->enable_overshoot) {
                        ret = pm2xxx_reg_read(pm2, PM2XXX_LED_CTRL_REG, &val);
-                       if (ret >= 0) {
-                               val |= PM2XXX_ANTI_OVERSHOOT_EN;
-                               ret = pm2xxx_reg_write(pm2, PM2XXX_LED_CTRL_REG,
-                                                       val);
-                               if (ret < 0){
-                                       dev_err(pm2->dev, "%s write failed\n",
-                                                       __func__);
-                                       goto error_occured;
-                               }
+                       if (ret < 0) {
+                               dev_err(pm2->dev, "%s pm2xxx read failed\n",
+                                                               __func__);
+                               goto error_occured;
+                       }
+                       val |= PM2XXX_ANTI_OVERSHOOT_EN;
+                       ret = pm2xxx_reg_write(pm2, PM2XXX_LED_CTRL_REG, val);
+                       if (ret < 0) {
+                               dev_err(pm2->dev, "%s pm2xxx write failed\n",
+                                                               __func__);
+                               goto error_occured;
                        }
-               else
-                       dev_err(pm2->dev, "%s read failed\n", __func__);
                }
 
                ret = pm2xxx_charging_enable_mngt(pm2);
-               if (ret) {
-                       dev_err(pm2->dev, "%s write failed\n", __func__);
+               if (ret < 0) {
+                       dev_err(pm2->dev, "Failed to enable"
+                                               "pm2xxx ac charger\n");
                        goto error_occured;
                }
 
@@ -739,9 +742,10 @@ static int pm2xxx_charger_ac_en(struct ux500_charger *charger,
                }
 
                ret = pm2xxx_charging_disable_mngt(pm2);
-               if (ret) {
-                       dev_err(pm2->dev, "%s write failed\n", __func__);
-                       return ret;
+               if (ret < 0) {
+                       dev_err(pm2->dev, "failed to disable"
+                                               "pm2xxx ac charger\n");
+                       goto error_occured;
                }
 
                dev_dbg(pm2->dev, "PM2301: " "Disabled AC charging\n");