ath9k: bring back direction setting in ath9k_{start_stop}

A regression was introduced in commit id 79d4db1214a ("ath9k: cleanup
led_pin initial") that broken the WLAN status led on my laptop with
AR9287 after suspending and resuming.

Steps to reproduce:
* Suspend (laptop)
* Resume (laptop)
* Observe that the WLAN led no longer turns ON/OFF depending on the
  status and is always red

Even though for my case it only needs to be set to OUT in ath9k_start
but for consistency bring back the IN direction setting as well.

Fixes: 79d4db1214a0 ("ath9k: cleanup led_pin initial")
Cc: Miaoqing Pan <miaoqing@codeaurora.org>
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: <stable@vger.kernel.org> # 4.7+
Link: https://bugzilla.kernel.org/show_bug.cgi?id=151711
Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com>
[kvalo@qca.qualcomm.com: improve commit log]
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 6ca4337..7cb65c3 100644 (file)
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -718,9 +718,12 @@ static int ath9k_start(struct ieee80211_hw *hw)
        if (!ath_complete_reset(sc, false))
                ah->reset_power_on = false;
 
-       if (ah->led_pin >= 0)
+       if (ah->led_pin >= 0) {
                ath9k_hw_set_gpio(ah, ah->led_pin,
                                  (ah->config.led_active_high) ? 1 : 0);
+               ath9k_hw_gpio_request_out(ah, ah->led_pin, NULL,
+                                         AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
+       }
 
        /*
         * Reset key cache to sane defaults (all entries cleared) instead of
@@ -864,9 +867,11 @@ static void ath9k_stop(struct ieee80211_hw *hw)
 
        spin_lock_bh(&sc->sc_pcu_lock);
 
-       if (ah->led_pin >= 0)
+       if (ah->led_pin >= 0) {
                ath9k_hw_set_gpio(ah, ah->led_pin,
                                  (ah->config.led_active_high) ? 0 : 1);
+               ath9k_hw_gpio_request_in(ah, ah->led_pin, NULL);
+       }
 
        ath_prepare_reset(sc);